- Kernel - mailweb.openeuler.org

[PATCH openEuler-23.09 1/7] sched: Introduce dynamic affinity for cfs scheduler
by Hui Tang 25 Jul '23

25 Jul '23

From: tanghui <tanghui20(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7NS6Y -------------------------------- Dynamic affinity set preferred cpus for task. When the utilization of taskgroup's preferred cpu is low, task only run in cpus preferred to enhance cpu resource locality and reduce interference between task cgroups, otherwise task can burst preferred cpus to use external cpu within cpus allowed. Signed-off-by: tanghui <tanghui20(a)huawei.com> --- init/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/init/Kconfig b/init/Kconfig index 32c24950c4ce..7a3299a632e0 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1013,6 +1013,16 @@ config RT_GROUP_SCHED endif #CGROUP_SCHED +config QOS_SCHED_DYNAMIC_AFFINITY + bool "qos dynamic affinity" + depends on CPUSETS + default n + help + This feature lets you allocate preferred cpus to taskgroup. If enabled, + it will make taskgroup only to use preferred cpus when cpu utilization + of taskgroup is below threshold setted, otherwise make taskgroup to use + cpus allowed. + config SCHED_MM_CID def_bool y depends on SMP && RSEQ -- 2.17.1

4 9

[PATCH openEuler-23.09 0/8] arm64: Add framework to turn an IPI as NMI
by Ruan Jinjie 25 Jul '23

25 Jul '23

arm64: Add framework to turn an IPI as NMI Sumit Garg (7): arm64: Add framework to turn IPI as NMI irqchip/gic-v3: Enable support for SGIs to act as NMIs arm64: smp: Assign and setup an IPI as NMI nmi: backtrace: Allow runtime arch specific override arm64: ipi_nmi: Add support for NMI backtrace kgdb: Expose default CPUs roundup fallback mechanism arm64: kgdb: Roundup cpus using IPI as NMI Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm/include/asm/irq.h | 2 +- arch/arm/kernel/smp.c | 3 +- arch/arm64/include/asm/irq.h | 6 +++ arch/arm64/include/asm/nmi.h | 17 +++++++ arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/ipi_nmi.c | 85 ++++++++++++++++++++++++++++++++ arch/arm64/kernel/kgdb.c | 18 +++++++ arch/arm64/kernel/smp.c | 8 +++ arch/mips/include/asm/irq.h | 2 +- arch/mips/kernel/process.c | 3 +- arch/powerpc/include/asm/nmi.h | 2 +- arch/powerpc/kernel/stacktrace.c | 3 +- arch/sparc/include/asm/irq_64.h | 2 +- arch/sparc/kernel/process_64.c | 4 +- arch/x86/include/asm/irq.h | 2 +- arch/x86/kernel/apic/hw_nmi.c | 3 +- drivers/irqchip/irq-gic-v3.c | 29 ++++++++--- include/linux/kgdb.h | 12 +++++ include/linux/nmi.h | 12 ++--- kernel/debug/debug_core.c | 8 ++- 20 files changed, 195 insertions(+), 28 deletions(-) create mode 100644 arch/arm64/include/asm/nmi.h create mode 100644 arch/arm64/kernel/ipi_nmi.c -- 2.34.1

2 9

[PATCH openEuler-1.0-LTS] net/sched: sch_qfq: account for stab overhead in qfq_enqueue
by Zhengchao Shao 25 Jul '23

25 Jul '23

From: Pedro Tammela <pctammela(a)mojatatu.com> mainline inclusion from mainline-v6.5-rc2 commit 3e337087c3b5805fe0b8a46ba622a962880b5d64 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7N3MX CVE: CVE-2023-3611 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Lion says: ------- In the QFQ scheduler a similar issue to CVE-2023-31436 persists. Consider the following code in net/sched/sch_qfq.c: static int qfq_enqueue(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff **to_free) { unsigned int len = qdisc_pkt_len(skb), gso_segs; // ... if (unlikely(cl->agg->lmax < len)) { pr_debug("qfq: increasing maxpkt from %u to %u for class %u", cl->agg->lmax, len, cl->common.classid); err = qfq_change_agg(sch, cl, cl->agg->class_weight, len); if (err) { cl->qstats.drops++; return qdisc_drop(skb, sch, to_free); } // ... } Similarly to CVE-2023-31436, "lmax" is increased without any bounds checks according to the packet length "len". Usually this would not impose a problem because packet sizes are naturally limited. This is however not the actual packet length, rather the "qdisc_pkt_len(skb)" which might apply size transformations according to "struct qdisc_size_table" as created by "qdisc_get_stab()" in net/sched/sch_api.c if the TCA_STAB option was set when modifying the qdisc. A user may choose virtually any size using such a table. As a result the same issue as in CVE-2023-31436 can occur, allowing heap out-of-bounds read / writes in the kmalloc-8192 cache. ------- We can create the issue with the following commands: tc qdisc add dev $DEV root handle 1: stab mtu 2048 tsize 512 mpu 0 \ overhead 999999999 linklayer ethernet qfq tc class add dev $DEV parent 1: classid 1:1 htb rate 6mbit burst 15k tc filter add dev $DEV parent 1: matchall classid 1:1 ping -I $DEV 1.1.1.2 This is caused by incorrectly assuming that qdisc_pkt_len() returns a length within the QFQ_MIN_LMAX < len < QFQ_MAX_LMAX. Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: Lion <nnamrec(a)gmail.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Jamal Hadi Salim <jhs(a)mojatatu.com> Signed-off-by: Pedro Tammela <pctammela(a)mojatatu.com> Reviewed-by: Simon Horman <simon.horman(a)corigine.com> Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Conflicts: net/sched/sch_qfq.c Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- net/sched/sch_qfq.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index 0326793b700b..a08579a5f75e 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -116,6 +116,7 @@ #define QFQ_MTU_SHIFT 16 /* to support TSO/GSO */ #define QFQ_MIN_LMAX 512 /* see qfq_slot_insert */ +#define QFQ_MAX_LMAX (1UL << QFQ_MTU_SHIFT) #define QFQ_MAX_AGG_CLASSES 8 /* max num classes per aggregate allowed */ @@ -387,8 +388,13 @@ static int qfq_change_agg(struct Qdisc *sch, struct qfq_class *cl, u32 weight, u32 lmax) { struct qfq_sched *q = qdisc_priv(sch); - struct qfq_aggregate *new_agg = qfq_find_agg(q, lmax, weight); + struct qfq_aggregate *new_agg; + /* 'lmax' can range from [QFQ_MIN_LMAX, pktlen + stab overhead] */ + if (lmax > QFQ_MAX_LMAX) + return -EINVAL; + + new_agg = qfq_find_agg(q, lmax, weight); if (new_agg == NULL) { /* create new aggregate */ new_agg = kzalloc(sizeof(*new_agg), GFP_ATOMIC); if (new_agg == NULL) -- 2.34.1

2 1

[PATCH OLK-5.10] arm64/mpam: fix missing kfree domain's ctrl_val arrray
by Jialin Zhang 25 Jul '23

25 Jul '23

From: Wang ShaoBo <bobo.shaobowang(a)huawei.com> hulk inclusion category: bugfix bugzilla: 187154, https://gitee.com/openeuler/kernel/issues/I7M52S CVE: NA -------------------------------- Fix mpam memleak issue found by kmemleak: unreferenced object 0xffff204000d1d000 (size 128): comm "cpuhp/24", pid 132, jiffies 4294896121 (age 146328.256s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000dd76fed3>] __kmalloc+0x478/0x664 [<00000000e2fa4b32>] mpam_resctrl_setup_domain+0x290/0x5d0 [<0000000088adc589>] mpam_resctrl_cpu_online+0x14c/0x1d0 [<00000000b223bfaa>] mpam_cpu_online+0x1c8/0x2e4 [<000000004438534a>] cpuhp_invoke_callback+0x1f4/0x11b0 [<0000000049ede841>] cpuhp_thread_fun+0x2b8/0x510 [<000000000d731c73>] smpboot_thread_fn+0x260/0x5a0 [<0000000093c61bad>] kthread+0x27c/0x350 [<00000000379f0572>] ret_from_fork+0x10/0x18 There are two cases causing memleak: 1. When offline all cpus of a domain in mpam_resctrl_cpu_offline(), we only free domain's space but not the space of ctrl_val array. 2. When allocating ctrl_val array failed in mpam_resctrl_setup_domain(), the space of ctrl_val array may not be freed. Fixes: e1ff5fac8ffc ("arm64/mpam: resctrl: Handle cpuhp and resctrl_dom allocation") Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- arch/arm64/kernel/mpam/mpam_setup.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/mpam/mpam_setup.c b/arch/arm64/kernel/mpam/mpam_setup.c index cef66a5e6f2f..4d0ec0052133 100644 --- a/arch/arm64/kernel/mpam/mpam_setup.c +++ b/arch/arm64/kernel/mpam/mpam_setup.c @@ -65,7 +65,7 @@ static int mpam_resctrl_setup_domain(unsigned int cpu, struct mpam_component *comp_iter, *comp; u32 num_partid; u32 **ctrlval_ptr; - enum resctrl_ctrl_type type; + enum resctrl_ctrl_type type, type_free; struct list_head *tmp; num_partid = mpam_sysprops_num_partid(); @@ -96,6 +96,12 @@ static int mpam_resctrl_setup_domain(unsigned int cpu, *ctrlval_ptr = kmalloc_array(num_partid, sizeof(**ctrlval_ptr), GFP_KERNEL); if (!*ctrlval_ptr) { + for_each_ctrl_type(type_free) { + if (type_free == type) + break; + ctrlval_ptr = &dom->resctrl_dom.ctrl_val[type_free]; + kfree(*ctrlval_ptr); + } kfree(dom); return -ENOMEM; } @@ -156,6 +162,8 @@ int mpam_resctrl_cpu_offline(unsigned int cpu) struct rdt_domain *d; struct mpam_resctrl_res *res; struct mpam_resctrl_dom *dom; + u32 **ctrlval_ptr; + enum resctrl_ctrl_type type; for_each_supported_resctrl_exports(res) { d = resctrl_get_domain_from_cpu(cpu, &res->resctrl_res); @@ -171,6 +179,11 @@ int mpam_resctrl_cpu_offline(unsigned int cpu) list_del(&d->list); dom = container_of(d, struct mpam_resctrl_dom, resctrl_dom); + for_each_ctrl_type(type) { + ctrlval_ptr = &dom->resctrl_dom.ctrl_val[type]; + kfree(*ctrlval_ptr); + } + kfree(dom); res->resctrl_res.dom_num--; -- 2.25.1

2 1

Re: [RFC 1/1] Optimizing the rand function on arm64 platforms
by tiantao (H) 24 Jul '23

24 Jul '23

在 2023/7/24 12:49, Xi Ruoyao 写道: > On Mon, 2023-07-24 at 04:01 +0000, tiantao (H) wrote: >> Thanks for the reply. >> >> Using FEAT_RNG can be a very big performance boost > Hmm, I think this may be untrue. I've attempted using inline asm to > invoke x86 rdrand instead of rand() for some competitive programming > code, but the result is *slower*. Thanks for the reply, I tested the performance on an ARM64 server very well, especially in multithreaded scenarios > The spec of this instruction [1] even says: > > If the instruction cannot return a genuine random number in a reasonable > period of time, PSTATE.NZCV is set to 0b0100 and the data value returned > is 0. > > So at least for some implementations the "reasonable period of time" may > be long. And we need to check PSTATE.NZCV and loop (or fallback to a > software-based PRNG), then it will be even slower... > > [1]:https://developer.arm.com/documentation/ddi0601/2023-06/AArch64-Register… > > Generally a hardware RNG is for cryptography use, so the design of HWRNG > is often focused on security, instead of speed. Maybe it is fast on > *your* implementation, and it may never fail on *your* implementation, > but other implementations may do things differently. > >> any suggestions for applying the FEAT_RNG feature to glibc? > The suggestion is "don't do that". > > A feature is not necessarily useful for Glibc only because it exists. >

1 0

[PATCH OLK-5.10 v3 0/8] enable bonding XDP
by Zhengchao Shao 24 Jul '23

24 Jul '23

Currently, the 10G 82599 network adapter is used for the test on the Intel(R) Xeon(R) Gold 6138 CPU @ 2.00 GHz platform. The peer end uses the pktgen of the dpdk to send 64 bytes packets. The test performance is as follows: -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.20% 10.70Mpps 10.70Mpps XDP_DROP (RSS): 1.90% 10.13Mpps XDP_TX (RSS): 6.20% 10.09Mpps 10.09Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.10% 6.84Mpps 6.84Mpps XDP_DROP (RSS): 2.00% 10.20pps XDP_TX (RSS): 8.40% 10.17Mpps 10.17Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 1.90% 29.3Mpps XDP_TX: 4.20% 11.31Mpps 11.31Mpps XDP_DROP (RSS): 3.90% 20.40Mpps XDP_TX (RSS): 16.80% 18.55Mpps 18.55Mpps -------------------------------------------------------------- Jonathan Toppins (1): bonding: fix NULL deref in bond_rr_gen_slave_id Jussi Maki (5): net, bonding: Refactor bond_xmit_hash for use with xdp_buff net, core: Add support for XDP redirection to slave device net, bonding: Add XDP support to the bonding driver bonding: Fix negative jump label count on nested bonding net: bonding: Use per-cpu rr_tx_counter Moshe Tal (1): bonding: Fix extraction of ports from the packet headers Zhengchao Shao (1): net: fix kabi change in struct net_device_ops drivers/net/bonding/bond_main.c | 457 ++++++++++++++++++++++++++++---- include/linux/filter.h | 13 +- include/linux/netdevice.h | 7 +- include/net/bonding.h | 3 +- net/core/dev.c | 13 +- net/core/filter.c | 25 ++ 6 files changed, 456 insertions(+), 62 deletions(-) -- 2.34.1

2 9

[PATCH OLK-5.10 0/5] enable bonding XDP
by Zhengchao Shao 24 Jul '23

24 Jul '23

Currently, the 10G 82599 network adapter is used for the test on the Intel(R) Xeon(R) Gold 6138 CPU @ 2.00 GHz platform. The peer end uses the pktgen of the dpdk to send 64 bytes packets. The test performance is as follows: -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.20% 10.70Mpps 10.70Mpps XDP_DROP (RSS): 1.90% 10.13Mpps XDP_TX (RSS): 6.20% 10.09Mpps 10.09Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.10% 6.84Mpps 6.84Mpps XDP_DROP (RSS): 2.00% 10.20pps XDP_TX (RSS): 8.40% 10.17Mpps 10.17Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 1.90% 29.3Mpps XDP_TX: 4.20% 11.31Mpps 11.31Mpps XDP_DROP (RSS): 3.90% 20.40Mpps XDP_TX (RSS): 16.80% 18.55Mpps 18.55Mpps -------------------------------------------------------------- Jussi Maki (5): net, bonding: Refactor bond_xmit_hash for use with xdp_buff net, core: Add support for XDP redirection to slave device net, bonding: Add XDP support to the bonding driver bonding: Fix negative jump label count on nested bonding net: bonding: Use per-cpu rr_tx_counter drivers/net/bonding/bond_main.c | 460 ++++++++++++++++++++++++++++---- include/linux/filter.h | 13 +- include/linux/netdevice.h | 6 + include/net/bonding.h | 3 +- net/core/dev.c | 13 +- net/core/filter.c | 25 ++ 6 files changed, 459 insertions(+), 61 deletions(-) -- 2.34.1

1 6

[PATCH OLK-5.10 v2 0/6] enable bonding XDP
by Zhengchao Shao 24 Jul '23

24 Jul '23

Currently, the 10G 82599 network adapter is used for the test on the Intel(R) Xeon(R) Gold 6138 CPU @ 2.00 GHz platform. The peer end uses the pktgen of the dpdk to send 64 bytes packets. The test performance is as follows: -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.20% 10.70Mpps 10.70Mpps XDP_DROP (RSS): 1.90% 10.13Mpps XDP_TX (RSS): 6.20% 10.09Mpps 10.09Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.10% 6.84Mpps 6.84Mpps XDP_DROP (RSS): 2.00% 10.20pps XDP_TX (RSS): 8.40% 10.17Mpps 10.17Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 1.90% 29.3Mpps XDP_TX: 4.20% 11.31Mpps 11.31Mpps XDP_DROP (RSS): 3.90% 20.40Mpps XDP_TX (RSS): 16.80% 18.55Mpps 18.55Mpps -------------------------------------------------------------- Jussi Maki (5): net, bonding: Refactor bond_xmit_hash for use with xdp_buff net, core: Add support for XDP redirection to slave device net, bonding: Add XDP support to the bonding driver bonding: Fix negative jump label count on nested bonding net: bonding: Use per-cpu rr_tx_counter Zhengchao Shao (1): net: fix kabi change in struct net_device_ops drivers/net/bonding/bond_main.c | 460 ++++++++++++++++++++++++++++---- include/linux/filter.h | 13 +- include/linux/netdevice.h | 7 +- include/net/bonding.h | 3 +- net/core/dev.c | 13 +- net/core/filter.c | 25 ++ 6 files changed, 459 insertions(+), 62 deletions(-) -- 2.34.1

2 7

[PATCH OLK-5.10 0/5] enable bonding XDP
by Zhengchao Shao 24 Jul '23

24 Jul '23

Currently, the 10G 82599 network adapter is used for the test on the Intel(R) Xeon(R) Gold 6138 CPU @ 2.00 GHz platform. The peer end uses the pktgen of the dpdk to send 64 bytes packets. The test performance is as follows: -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.20% 10.70Mpps 10.70Mpps XDP_DROP (RSS): 1.90% 10.13Mpps XDP_TX (RSS): 6.20% 10.09Mpps 10.09Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 1.00% 14.69Mpps XDP_TX: 2.10% 6.84Mpps 6.84Mpps XDP_DROP (RSS): 2.00% 10.20pps XDP_TX (RSS): 8.40% 10.17Mpps 10.17Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 1.90% 29.3Mpps XDP_TX: 4.20% 11.31Mpps 11.31Mpps XDP_DROP (RSS): 3.90% 20.40Mpps XDP_TX (RSS): 16.80% 18.55Mpps 18.55Mpps -------------------------------------------------------------- Jussi Maki (5): net, bonding: Refactor bond_xmit_hash for use with xdp_buff net, core: Add support for XDP redirection to slave device net, bonding: Add XDP support to the bonding driver bonding: Fix negative jump label count on nested bonding net: bonding: Use per-cpu rr_tx_counter drivers/net/bonding/bond_main.c | 460 ++++++++++++++++++++++++++++---- include/linux/filter.h | 13 +- include/linux/netdevice.h | 6 + include/net/bonding.h | 3 +- net/core/dev.c | 13 +- net/core/filter.c | 25 ++ 6 files changed, 459 insertions(+), 61 deletions(-) -- 2.34.1

2 6

[PATCH openEuler-22.03-LTS 0/2] Fix CDM node problems
by Zhang Zekun 24 Jul '23

24 Jul '23

Fix problem introduced by feature CDM node, which might alloc memory from other no cdm nodes. Zhou Guanghui (2): mm: fix ignore cpuset enforcement mm: fix alloc CDM node memory for MPOL_BIND mm/page_alloc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) -- 2.17.1

2 3

答复: [RFC 1/1] Optimizing the rand function on arm64 platforms
by tiantao (H) 24 Jul '23

24 Jul '23

Thanks for the reply. Using FEAT_RNG can be a very big performance boost, any suggestions for applying the FEAT_RNG feature to glibc? -----邮件原件----- 发件人: Xi Ruoyao <xry111(a)xry111.site> 发送时间: 2023年7月24日 11:50 收件人: tiantao (H) <tiantao6(a)hisilicon.com>; libc-alpha(a)sourceware.org 抄送: kernel(a)openeuler.org 主题: Re: [RFC 1/1] Optimizing the rand function on arm64 platforms On Mon, 2023-07-24 at 10:32 +0800, Tian Tao via Libc-alpha wrote: > Armv8.5 adds the FEAT_RNG feature so that true random numbers can be > obtained from the cpu. This optimization is therefore proposed for the > arm64 platform. NAK. Glibc documentation explicitly says: You can obtain repeatable sequences of numbers on a particular machine type by specifying the same initial seed value for the random number generator. This rand() implementation obviously does not satisfy this requirement. > > Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> > --- > stdlib/rand.c | 32 ++++++++++++++++++++++++++++++++ > 1 file changed, 32 insertions(+) > > diff --git a/stdlib/rand.c b/stdlib/rand.c index > c250c065e4..f199dbd65f 100644 > --- a/stdlib/rand.c > +++ b/stdlib/rand.c > @@ -19,10 +19,42 @@ > > #undef rand > > +#ifdef __aarch64__ > +// A global variable to indicate whether rndr instruction is > supported > +static int rndr_supported = 0; > +// A function prototype to check rndr support static void > +check_rndr_support (void) __attribute__ ((constructor)); #endif > > /* Return a random integer between 0 and RAND_MAX. */ > int > rand (void) > { > + // Use armv8.5 rndr instruction if supported #ifdef __aarch64__ > + if (rndr_supported) { > + unsigned int r; > + asm volatile("mrs %0, s3_3_c2_c4_0" : "=r" (r)); > + // Discard the least random bit > + r >>=1; > + return (int) r; > + } > +#endif > return (int) __random (); > } > + > +#ifdef __aarch64__ > +// A function to check rndr support and set the global variable > accordingly > +static void > +check_rndr_support (void) > +{ > + unsigned long isar0; > + // Read the ID_AA64ISAR0_EL1 register to check the rndr feature > + asm volatile("mrs %0, id_aa64isar0_el1" : "=r" (isar0)); > + // Check the bits [63:60] for the rndr feature > + if ((isar0 >> 60) & 0xf) { > + // Set the global variable to indicate rndr support > + rndr_supported = 1; > + } > +} > +#endif -- Xi Ruoyao <xry111(a)xry111.site> School of Aerospace Science and Technology, Xidian University

1 0

Re: EAS适配大数据环境验证
by Ruan Jinjie 24 Jul '23

24 Jul '23

关键线程demo 大数据测试 On 2023/7/20 10:51, Ruan Jinjie wrote: > bpftrace测调度延迟脚本 > > On 2023/7/18 12:06, Ruan Jinjie wrote: >> >> >> On 2023/7/17 10:47, Ruan Jinjie wrote: >>> >>> >>> On 2023/7/15 18:18, Ruan Jinjie wrote: >>>> >>>> >>>> On 2023/7/15 10:36, Ruan Jinjie wrote: >>>>> >>>>> >>>>> On 2023/7/14 13:18, Ruan Jinjie wrote: >>>>>> >>>>>> >>>>>> On 2023/7/13 13:03, Ruan Jinjie wrote: >>>>>>> 潮汐适配SP2 >>>>>>> >>>>>>> On 2023/7/13 10:58, Ruan Jinjie wrote: >>>>>>>> >>>>>>>> >>>>>>>> On 2023/7/12 17:23, Ruan Jinjie wrote: >>>>>>>>> >>>>>>>>> >>>>>>>>> On 2023/7/5 17:24, Ruan Jinjie wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On 2023/7/5 17:19, Ruan Jinjie wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On 2023/7/4 20:34, Ruan Jinjie wrote: >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> On 2023/7/4 13:04, Ruan Jinjie wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On 2023/6/3 10:52, Ruan Jinjie wrote:

1 0

[RFC 1/1] Optimizing the rand function on arm64 platforms
by Tian Tao 24 Jul '23

24 Jul '23

Armv8.5 adds the FEAT_RNG feature so that true random numbers can be obtained from the cpu. This optimization is therefore proposed for the arm64 platform. Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> --- stdlib/rand.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) diff --git a/stdlib/rand.c b/stdlib/rand.c index c250c065e4..f199dbd65f 100644 --- a/stdlib/rand.c +++ b/stdlib/rand.c @@ -19,10 +19,42 @@ #undef rand +#ifdef __aarch64__ +// A global variable to indicate whether rndr instruction is supported +static int rndr_supported = 0; +// A function prototype to check rndr support +static void check_rndr_support (void) __attribute__ ((constructor)); +#endif /* Return a random integer between 0 and RAND_MAX. */ int rand (void) { + // Use armv8.5 rndr instruction if supported +#ifdef __aarch64__ + if (rndr_supported) { + unsigned int r; + asm volatile("mrs %0, s3_3_c2_c4_0" : "=r" (r)); + // Discard the least random bit + r >>=1; + return (int) r; + } +#endif return (int) __random (); } + +#ifdef __aarch64__ +// A function to check rndr support and set the global variable accordingly +static void +check_rndr_support (void) +{ + unsigned long isar0; + // Read the ID_AA64ISAR0_EL1 register to check the rndr feature + asm volatile("mrs %0, id_aa64isar0_el1" : "=r" (isar0)); + // Check the bits [63:60] for the rndr feature + if ((isar0 >> 60) & 0xf) { + // Set the global variable to indicate rndr support + rndr_supported = 1; + } +} +#endif -- 2.33.0

1 0

【会议通知】 openEuler-23.09开发讨论
by Meeting Book 21 Jul '23

21 Jul '23

会议主题 Subject openEuler-23.09开发讨论会议时间 Time 2023-07-24 10:30-12:00 (UTC+08:00)Beijing 会议地点 Location Welink视频会议 Welink Video Meeting 加入会议(External)<https://meeting.huaweicloud.com/welink/#/j/97708050/7CrJkkOXwkz174GgyAwFZLc…> 会议ID Meeting ID 97708050 Guest密码 Voice access code 890236 召集人 Convener 郑增凯提示 Tips 请点击会议链接加入会议,首次使用请在入会界面根据提示下载并安装客户端后输入ID入会。 Click the meeting link to join the meeting. For the first time, download and install the client as prompted and enter the ID to join the meeting

1 0

[PATCH openEuler-23.09 0/8] arm64: Add framework to turn an IPI as NMI
by Ruan Jinjie 21 Jul '23

21 Jul '23

arm64: Add framework to turn an IPI as NMI Sumit Garg (7): arm64: Add framework to turn IPI as NMI irqchip/gic-v3: Enable support for SGIs to act as NMIs arm64: smp: Assign and setup an IPI as NMI nmi: backtrace: Allow runtime arch specific override arm64: ipi_nmi: Add support for NMI backtrace kgdb: Expose default CPUs roundup fallback mechanism arm64: kgdb: Roundup cpus using IPI as NMI Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm/include/asm/irq.h | 2 +- arch/arm/kernel/smp.c | 3 +- arch/arm64/include/asm/irq.h | 6 +++ arch/arm64/include/asm/nmi.h | 17 +++++++ arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/ipi_nmi.c | 85 ++++++++++++++++++++++++++++++++ arch/arm64/kernel/kgdb.c | 18 +++++++ arch/arm64/kernel/smp.c | 8 +++ arch/mips/include/asm/irq.h | 2 +- arch/mips/kernel/process.c | 3 +- arch/powerpc/include/asm/nmi.h | 2 +- arch/powerpc/kernel/stacktrace.c | 3 +- arch/sparc/include/asm/irq_64.h | 2 +- arch/sparc/kernel/process_64.c | 4 +- arch/x86/include/asm/irq.h | 2 +- arch/x86/kernel/apic/hw_nmi.c | 3 +- drivers/irqchip/irq-gic-v3.c | 29 ++++++++--- include/linux/kgdb.h | 12 +++++ include/linux/nmi.h | 12 ++--- kernel/debug/debug_core.c | 8 ++- 20 files changed, 195 insertions(+), 28 deletions(-) create mode 100644 arch/arm64/include/asm/nmi.h create mode 100644 arch/arm64/kernel/ipi_nmi.c -- 2.34.1

2 9

[PATCH OLK-5.10] ipv6: Fix an uninit variable access bug in __ip6_make_skb()
by Wang Yufen 21 Jul '23

21 Jul '23

From: Ziyang Xuan <william.xuanziyang(a)huawei.com> stable inclusion from stable-v5.10.178 commit 605b056d63302ae84eb136e88d4df49124bd5e0d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I71Z4N Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit ea30388baebcce37fd594d425a65037ca35e59e8 ] Syzbot reported a bug as following: ===================================================== BUG: KMSAN: uninit-value in arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] BUG: KMSAN: uninit-value in arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] BUG: KMSAN: uninit-value in atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] BUG: KMSAN: uninit-value in __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 arch_atomic64_inc arch/x86/include/asm/atomic64_64.h:88 [inline] arch_atomic_long_inc include/linux/atomic/atomic-long.h:161 [inline] atomic_long_inc include/linux/atomic/atomic-instrumented.h:1429 [inline] __ip6_make_skb+0x2f37/0x30f0 net/ipv6/ip6_output.c:1956 ip6_finish_skb include/net/ipv6.h:1122 [inline] ip6_push_pending_frames+0x10e/0x550 net/ipv6/ip6_output.c:1987 rawv6_push_pending_frames+0xb12/0xb90 net/ipv6/raw.c:579 rawv6_sendmsg+0x297e/0x2e60 net/ipv6/raw.c:922 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook mm/slab.h:766 [inline] slab_alloc_node mm/slub.c:3452 [inline] __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491 __do_kmalloc_node mm/slab_common.c:967 [inline] __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988 kmalloc_reserve net/core/skbuff.c:492 [inline] __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565 alloc_skb include/linux/skbuff.h:1270 [inline] __ip6_append_data+0x51c1/0x6bb0 net/ipv6/ip6_output.c:1684 ip6_append_data+0x411/0x580 net/ipv6/ip6_output.c:1854 rawv6_sendmsg+0x2882/0x2e60 net/ipv6/raw.c:915 inet_sendmsg+0x101/0x180 net/ipv4/af_inet.c:827 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0xa8e/0xe70 net/socket.c:2476 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2530 __sys_sendmsg net/socket.c:2559 [inline] __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x367/0x540 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd It is because icmp6hdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp6_hdr(skb)->icmp6_type directly will trigger the uninit variable access bug. Use a local variable icmp6_type to carry the correct value in different scenarios. Fixes: 14878f75abd5 ("[IPV6]: Add ICMPMsgStats MIB (RFC 4293) [rev 2]") Reported-by: syzbot+8257f4dcef79de670baf(a)syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=3d605ec1d0a7f2a269a1a6936ac7f2b85975ee… Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- net/ipv6/ip6_output.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c index f30cc72..8be38a1 100644 --- a/net/ipv6/ip6_output.c +++ b/net/ipv6/ip6_output.c @@ -1920,8 +1920,13 @@ struct sk_buff *__ip6_make_skb(struct sock *sk, IP6_UPD_PO_STATS(net, rt->rt6i_idev, IPSTATS_MIB_OUT, skb->len); if (proto == IPPROTO_ICMPV6) { struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb)); + u8 icmp6_type; - ICMP6MSGOUT_INC_STATS(net, idev, icmp6_hdr(skb)->icmp6_type); + if (sk->sk_socket->type == SOCK_RAW && !inet_sk(sk)->hdrincl) + icmp6_type = fl6->fl6_icmp_type; + else + icmp6_type = icmp6_hdr(skb)->icmp6_type; + ICMP6MSGOUT_INC_STATS(net, idev, icmp6_type); ICMP6_INC_STATS(net, idev, ICMP6_MIB_OUTMSGS); } -- 1.8.3.1

2 1

[PATCH openEuler-22.03-LTS-SP2] block: don't set GD_NEED_PART_SCAN if scan partition failed
by Li Lingfeng 21 Jul '23

21 Jul '23

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v6.3-rc6~9^2 commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7J3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/genhd.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- block/genhd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 3c34dd011585..83f407e1563a 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -770,6 +770,13 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode) else blkdev_put(bdev, mode & ~FMODE_EXCL); + /* + * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set, + * and this will cause that re-assemble partitioned raid device will + * creat partition for underlying disk. + */ + clear_bit(GD_NEED_PART_SCAN, &disk->state); + if (!(mode & FMODE_EXCL)) { bd_abort_claiming(claim, claim, disk_scan_partitions); bdput(claim); -- 2.31.1

2 1

[PATCH openEuler-22.03-LTS-SP1] block: don't set GD_NEED_PART_SCAN if scan partition failed
by Li Lingfeng 21 Jul '23

21 Jul '23

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v6.3-rc6~9^2 commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7J3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/genhd.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- block/genhd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 3c34dd011585..83f407e1563a 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -770,6 +770,13 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode) else blkdev_put(bdev, mode & ~FMODE_EXCL); + /* + * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set, + * and this will cause that re-assemble partitioned raid device will + * creat partition for underlying disk. + */ + clear_bit(GD_NEED_PART_SCAN, &disk->state); + if (!(mode & FMODE_EXCL)) { bd_abort_claiming(claim, claim, disk_scan_partitions); bdput(claim); -- 2.31.1

2 1

[PATCH openEuler-22.03-LTS] block: don't set GD_NEED_PART_SCAN if scan partition failed
by Li Lingfeng 21 Jul '23

21 Jul '23

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v6.3-rc6 commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7J3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/genhd.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- block/genhd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 3c34dd011585..83f407e1563a 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -770,6 +770,13 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode) else blkdev_put(bdev, mode & ~FMODE_EXCL); + /* + * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set, + * and this will cause that re-assemble partitioned raid device will + * creat partition for underlying disk. + */ + clear_bit(GD_NEED_PART_SCAN, &disk->state); + if (!(mode & FMODE_EXCL)) { bd_abort_claiming(claim, claim, disk_scan_partitions); bdput(claim); -- 2.31.1

2 1

[PATCH openEuler-23.09 0/8] arm64: Add framework to turn an IPI as NMI
by Ruan Jinjie 20 Jul '23

20 Jul '23

arm64: Add framework to turn an IPI as NMI Sumit Garg (7): arm64: Add framework to turn IPI as NMI irqchip/gic-v3: Enable support for SGIs to act as NMIs arm64: smp: Assign and setup an IPI as NMI nmi: backtrace: Allow runtime arch specific override arm64: ipi_nmi: Add support for NMI backtrace kgdb: Expose default CPUs roundup fallback mechanism arm64: kgdb: Roundup cpus using IPI as NMI Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm/include/asm/irq.h | 2 +- arch/arm/kernel/smp.c | 3 +- arch/arm64/include/asm/irq.h | 6 +++ arch/arm64/include/asm/nmi.h | 17 +++++++ arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/ipi_nmi.c | 85 ++++++++++++++++++++++++++++++++ arch/arm64/kernel/kgdb.c | 18 +++++++ arch/arm64/kernel/smp.c | 8 +++ arch/mips/include/asm/irq.h | 2 +- arch/mips/kernel/process.c | 3 +- arch/powerpc/include/asm/nmi.h | 2 +- arch/powerpc/kernel/stacktrace.c | 3 +- arch/sparc/include/asm/irq_64.h | 2 +- arch/sparc/kernel/process_64.c | 4 +- arch/x86/include/asm/irq.h | 2 +- arch/x86/kernel/apic/hw_nmi.c | 3 +- drivers/irqchip/irq-gic-v3.c | 29 ++++++++--- include/linux/kgdb.h | 12 +++++ include/linux/nmi.h | 12 ++--- kernel/debug/debug_core.c | 8 ++- 20 files changed, 195 insertions(+), 28 deletions(-) create mode 100644 arch/arm64/include/asm/nmi.h create mode 100644 arch/arm64/kernel/ipi_nmi.c -- 2.34.1

2 9

[PATCH V2 openEuler-22.03-LTS 0/2] Fix alloc CDM node memory
by Zhang Zekun 20 Jul '23

20 Jul '23

Fix problem introduced by feature CDM node, which might alloc memory from other no cdm nodes. v2: -fix commit message warning Zhou Guanghui (2): mm: fix ignore cpuset enforcement mm: fix alloc CDM node memory for MPOL_BIND mm/page_alloc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) -- 2.17.1

1 2

[PATCH 0/3] openEuler kernel checkpatch test
by Jialin Zhang 20 Jul '23

20 Jul '23

This PR is only for openEuler kernel checkpatch test Inki Dae (1): drm/exynos: vidi: fix a wrong error return Min Li (2): drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl drivers/gpu/drm/exynos/exynos_drm_g2d.c | 2 +- drivers/gpu/drm/exynos/exynos_drm_vidi.c | 2 -- drivers/gpu/drm/radeon/radeon_gem.c | 4 +--- 3 files changed, 2 insertions(+), 6 deletions(-) -- 2.25.1

1 3

[PATCH openEuler-1.0-LTS] media: dvb-core: Fix use-after-free due on race condition at dvb_net
by Cai Xinchen 20 Jul '23

20 Jul '23

From: Hyunwoo Kim <imv4bel(a)gmail.com> stable inclusion from stable-v4.19.285 commit 7bb9c6e05efcecb15b0354d574efbc36ca321d75 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I635JD CVE: CVE-2022-45886 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4172385b0c9ac366dcab78eda48c26814b87ed1a ] A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs. The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'. So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++--- include/media/dvb_net.h | 4 ++++ 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index 10f78109bb3f..d8bdca2bf566 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -1562,15 +1562,43 @@ static long dvb_net_ioctl(struct file *file, return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl); } +static int locked_dvb_net_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + int ret; + + if (mutex_lock_interruptible(&dvbnet->remove_mutex)) + return -ERESTARTSYS; + + if (dvbnet->exit) { + mutex_unlock(&dvbnet->remove_mutex); + return -ENODEV; + } + + ret = dvb_generic_open(inode, file); + + mutex_unlock(&dvbnet->remove_mutex); + + return ret; +} + static int dvb_net_close(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_net *dvbnet = dvbdev->priv; + mutex_lock(&dvbnet->remove_mutex); + dvb_generic_release(inode, file); - if(dvbdev->users == 1 && dvbnet->exit == 1) + if (dvbdev->users == 1 && dvbnet->exit == 1) { + mutex_unlock(&dvbnet->remove_mutex); wake_up(&dvbdev->wait_queue); + } else { + mutex_unlock(&dvbnet->remove_mutex); + } + return 0; } @@ -1578,7 +1606,7 @@ static int dvb_net_close(struct inode *inode, struct file *file) static const struct file_operations dvb_net_fops = { .owner = THIS_MODULE, .unlocked_ioctl = dvb_net_ioctl, - .open = dvb_generic_open, + .open = locked_dvb_net_open, .release = dvb_net_close, .llseek = noop_llseek, }; @@ -1597,10 +1625,13 @@ void dvb_net_release (struct dvb_net *dvbnet) { int i; + mutex_lock(&dvbnet->remove_mutex); dvbnet->exit = 1; + mutex_unlock(&dvbnet->remove_mutex); + if (dvbnet->dvbdev->users < 1) wait_event(dvbnet->dvbdev->wait_queue, - dvbnet->dvbdev->users==1); + dvbnet->dvbdev->users == 1); dvb_unregister_device(dvbnet->dvbdev); @@ -1619,6 +1650,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet, int i; mutex_init(&dvbnet->ioctl_mutex); + mutex_init(&dvbnet->remove_mutex); dvbnet->demux = dmx; for (i=0; i<DVB_NET_DEVICES_MAX; i++) diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h index 5e31d37f25fa..cc01dffcc9f3 100644 --- a/include/media/dvb_net.h +++ b/include/media/dvb_net.h @@ -41,6 +41,9 @@ * @exit: flag to indicate when the device is being removed. * @demux: pointer to &struct dmx_demux. * @ioctl_mutex: protect access to this struct. + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_net. * * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network * devices. @@ -53,6 +56,7 @@ struct dvb_net { unsigned int exit:1; struct dmx_demux *demux; struct mutex ioctl_mutex; + struct mutex remove_mutex; }; /** -- 2.17.1

2 1

[openEuler-22.03-LTS 1/2] mm: fix ignore cpuset enforcement
by Zhang Zekun 20 Jul '23

20 Jul '23

From: Zhou Guanghui <zhouguanghui1(a)huawei.com> ascend inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I612UG CVE: NA ----------------------------------------------------- Since the current condition ignores the cpuset enforcement by adding __GFP_THISNODEi to the gfp_mask, this will result in allocations that specify __GFP_THISNODE and non-cdm nodes not subject to cpuset restrictions. For example, procA pid 1000: node 0 cpus: 0 1 2 3 node 0 free: 57199MB node 1 cpus: 4 5 6 7 node 1 free: 55930MB cpuset/test/cpuset.mems 1 cpuset/test/tasks 1000 cpuset/test/cpuset.cpus 0-3 No cdm node exists. When procA malloc 100MB memory, the result is: node 0 cpus: 0 1 2 3 node 0 free: 57099MB node 1 cpus: 4 5 6 7 node 1 free: 55930MB This is not what we expected, and in fact 100 MB of memory should be allocated from node1. The reason for this problem is that THP specifies __GFP_THISNODE to attempt to allocate from the local node. Therefore, the cpuset enforcement should be ignored only when explicitly allocating memory from the cdm node using __GFP_ THISNODE. Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> --- mm/page_alloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index df3723c0a819..d090465de32b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4946,7 +4946,8 @@ static inline bool prepare_alloc_pages(gfp_t gfp_mask, unsigned int order, ac->migratetype = gfp_migratetype(gfp_mask); #ifdef CONFIG_COHERENT_DEVICE - if (cpusets_enabled() && !(*alloc_gfp & __GFP_THISNODE)) { + if (cpusets_enabled() && + (!(*alloc_gfp & __GFP_THISNODE) || !is_cdm_node(preferred_nid))) { #else if (cpusets_enabled()) { #endif -- 2.17.1

1 1

[PATCH OLK-5.10 0/2] ksmbd: fix two ksmbd cve issue
by Long Li 20 Jul '23

20 Jul '23

Chih-Yen Chang (1): ksmbd: fix global-out-of-bounds in smb2_find_context_vals Namjae Jeon (1): ksmbd: validate command payload size fs/ksmbd/oplock.c | 5 +++-- fs/ksmbd/oplock.h | 2 +- fs/ksmbd/smb2misc.c | 23 ++++++++++++----------- fs/ksmbd/smb2pdu.c | 14 +++++++------- 4 files changed, 23 insertions(+), 21 deletions(-) -- 2.31.1

2 3

[openEuler-22.03-LTS 1/2] mm: fix ignore cpuset enforcement
by Zhang Zekun 20 Jul '23

20 Jul '23

From: Zhou Guanghui <zhouguanghui1(a)huawei.com> ascend inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I612UG CVE: NA ----------------------------------------------------- Since the current condition ignores the cpuset enforcement by adding __GFP_THISNODEi to the gfp_mask, this will result in allocations that specify __GFP_THISNODE and non-cdm nodes not subject to cpuset restrictions. For example, procA pid 1000: node 0 cpus: 0 1 2 3 node 0 free: 57199MB node 1 cpus: 4 5 6 7 node 1 free: 55930MB cpuset/test/cpuset.mems 1 cpuset/test/tasks 1000 cpuset/test/cpuset.cpus 0-3 No cdm node exists. When procA malloc 100MB memory, the result is: node 0 cpus: 0 1 2 3 node 0 free: 57099MB node 1 cpus: 4 5 6 7 node 1 free: 55930MB This is not what we expected, and in fact 100 MB of memory should be allocated from node1. The reason for this problem is that THP specifies __GFP_THISNODE to attempt to allocate from the local node. Therefore, the cpuset enforcement should be ignored only when explicitly allocating memory from the cdm node using __GFP_ THISNODE. Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> --- mm/page_alloc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index df3723c0a819..d090465de32b 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -4946,7 +4946,8 @@ static inline bool prepare_alloc_pages(gfp_t gfp_mask, unsigned int order, ac->migratetype = gfp_migratetype(gfp_mask); #ifdef CONFIG_COHERENT_DEVICE - if (cpusets_enabled() && !(*alloc_gfp & __GFP_THISNODE)) { + if (cpusets_enabled() && + (!(*alloc_gfp & __GFP_THISNODE) || !is_cdm_node(preferred_nid))) { #else if (cpusets_enabled()) { #endif -- 2.17.1

1 1

[PATCH openEuler-22.03-LTS-SP2] dm stats: check for and propagate alloc_percpu failure
by Li Lingfeng 20 Jul '23

20 Jul '23

From: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> mainline inclusion from mainline-v6.3-rc4 commit d3aa3e060c4a80827eb801fc448debc9daa7c46b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7I2L8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used. Fixes: fd2ed4d25270 ("dm: add statistics support") Cc: stable(a)vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-stats.c drivers/md/dm.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-stats.c | 7 ++++++- drivers/md/dm-stats.h | 2 +- drivers/md/dm.c | 4 +++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c index 55443a6598fa..4029281ca383 100644 --- a/drivers/md/dm-stats.c +++ b/drivers/md/dm-stats.c @@ -188,7 +188,7 @@ static int dm_stat_in_flight(struct dm_stat_shared *shared) atomic_read(&shared->in_flight[WRITE]); } -void dm_stats_init(struct dm_stats *stats) +int dm_stats_init(struct dm_stats *stats) { int cpu; struct dm_stats_last_position *last; @@ -196,11 +196,16 @@ void dm_stats_init(struct dm_stats *stats) mutex_init(&stats->mutex); INIT_LIST_HEAD(&stats->list); stats->last = alloc_percpu(struct dm_stats_last_position); + if (!stats->last) + return -ENOMEM; + for_each_possible_cpu(cpu) { last = per_cpu_ptr(stats->last, cpu); last->last_sector = (sector_t)ULLONG_MAX; last->last_rw = UINT_MAX; } + + return 0; } void dm_stats_cleanup(struct dm_stats *stats) diff --git a/drivers/md/dm-stats.h b/drivers/md/dm-stats.h index 2ddfae678f32..dcac11fce03b 100644 --- a/drivers/md/dm-stats.h +++ b/drivers/md/dm-stats.h @@ -22,7 +22,7 @@ struct dm_stats_aux { unsigned long long duration_ns; }; -void dm_stats_init(struct dm_stats *st); +int dm_stats_init(struct dm_stats *st); void dm_stats_cleanup(struct dm_stats *st); struct mapped_device; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 1cb2a84f2403..0c9ce43f3b53 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1904,7 +1904,9 @@ static struct mapped_device *alloc_dev(int minor) if (!md->bdev) goto bad; - dm_stats_init(&md->stats); + r = dm_stats_init(&md->stats); + if (r < 0) + goto bad; /* Populate the mapping, nobody knows we exist yet */ spin_lock(&_minor_lock); -- 2.31.1

2 1

[PATCH OLK-5.10 0/3] CVE-2023-3567 fix patches
by Lu Jialin 20 Jul '23

20 Jul '23

First is the patch to fix CVE-2023-3567. The latter two patches are the bugfix patches for the first patch. George Kennedy (2): vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF vc_screen: modify vcs_size() handling in vcs_read() Thomas Weißschuh (1): vc_screen: don't clobber return value in vcs_read drivers/tty/vt/vc_screen.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) -- 2.17.1

2 4

[PATCH OLK-5.10] ksmbd: fix out-of-bound read in deassemble_neg_contexts()
by Li Lingfeng 20 Jul '23

20 Jul '23

From: Namjae Jeon <linkinjeon(a)kernel.org> mainline inclusion from mainline-v6.4-rc6 commit f1a411873c85b642f13b01f21b534c2bab81fc1b category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7LU2Q CVE: CVE-2023-38427 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/f… -------------------------------- The check in the beginning is `clen + sizeof(struct smb2_neg_context) <= len_of_ctxts`, but in the end of loop, `len_of_ctxts` will subtract `((clen + 7) & ~0x7) + sizeof(struct smb2_neg_context)`, which causes integer underflow when clen does the 8 alignment. We should use `(clen + 7) & ~0x7` in the check to avoid underflow from happening. Then there are some variables that need to be declared unsigned instead of signed. [ 11.671070] BUG: KASAN: slab-out-of-bounds in smb2_handle_negotiate+0x799/0x1610 [ 11.671533] Read of size 2 at addr ffff888005e86cf2 by task kworker/0:0/7 ... [ 11.673383] Call Trace: [ 11.673541] <TASK> [ 11.673679] dump_stack_lvl+0x33/0x50 [ 11.673913] print_report+0xcc/0x620 [ 11.674671] kasan_report+0xae/0xe0 [ 11.675171] kasan_check_range+0x35/0x1b0 [ 11.675412] smb2_handle_negotiate+0x799/0x1610 [ 11.676217] ksmbd_smb_negotiate_common+0x526/0x770 [ 11.676795] handle_ksmbd_work+0x274/0x810 ... Cc: stable(a)vger.kernel.org Signed-off-by: Chih-Yen Chang <cc85nod(a)gmail.com> Tested-by: Chih-Yen Chang <cc85nod(a)gmail.com> Signed-off-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Conflict: fs/smb/server/smb2pdu.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- fs/ksmbd/smb2pdu.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 18e176fcddf0..9add135cb5da 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -978,13 +978,13 @@ static void decode_sign_cap_ctxt(struct ksmbd_conn *conn, static __le32 deassemble_neg_contexts(struct ksmbd_conn *conn, struct smb2_negotiate_req *req, - int len_of_smb) + unsigned int len_of_smb) { /* +4 is to account for the RFC1001 len field */ struct smb2_neg_context *pctx = (struct smb2_neg_context *)req; int i = 0, len_of_ctxts; - int offset = le32_to_cpu(req->NegotiateContextOffset); - int neg_ctxt_cnt = le16_to_cpu(req->NegotiateContextCount); + unsigned int offset = le32_to_cpu(req->NegotiateContextOffset); + unsigned int neg_ctxt_cnt = le16_to_cpu(req->NegotiateContextCount); __le32 status = STATUS_INVALID_PARAMETER; ksmbd_debug(SMB, "decoding %d negotiate contexts\n", neg_ctxt_cnt); @@ -1002,7 +1002,7 @@ static __le32 deassemble_neg_contexts(struct ksmbd_conn *conn, if (len_of_ctxts == 0) break; - if (len_of_ctxts < sizeof(struct smb2_neg_context)) + if (len_of_ctxts < (int)sizeof(struct smb2_neg_context)) break; pctx = (struct smb2_neg_context *)((char *)pctx + offset); @@ -1053,9 +1053,8 @@ static __le32 deassemble_neg_contexts(struct ksmbd_conn *conn, } /* offsets must be 8 byte aligned */ - clen = (clen + 7) & ~0x7; - offset = clen + sizeof(struct smb2_neg_context); - len_of_ctxts -= clen + sizeof(struct smb2_neg_context); + offset = (clen + sizeof(struct smb2_neg_context + 7) & ~0x7; + len_of_ctxts -= offset; } return status; } -- 2.31.1

2 1

[PATCH OLK-5.10] ksmbd: fix wrong UserName check in session_user
by Li Lingfeng 20 Jul '23

20 Jul '23

From: Chih-Yen Chang <cc85nod(a)gmail.com> mainline inclusion from mainline-v6.4-rc3 commit f0a96d1aafd8964e1f9955c830a3e5cb3c60a90f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7LU3D CVE: CVE-2023-38428 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/f… -------------------------------- The offset of UserName is related to the address of security buffer. To ensure the validaty of UserName, we need to compare name_off + name_len with secbuf_len instead of auth_msg_len. [ 27.096243] ================================================================== [ 27.096890] BUG: KASAN: slab-out-of-bounds in smb_strndup_from_utf16+0x188/0x350 [ 27.097609] Read of size 2 at addr ffff888005e3b542 by task kworker/0:0/7 ... [ 27.099950] Call Trace: [ 27.100194] <TASK> [ 27.100397] dump_stack_lvl+0x33/0x50 [ 27.100752] print_report+0xcc/0x620 [ 27.102305] kasan_report+0xae/0xe0 [ 27.103072] kasan_check_range+0x35/0x1b0 [ 27.103757] smb_strndup_from_utf16+0x188/0x350 [ 27.105474] smb2_sess_setup+0xaf8/0x19c0 [ 27.107935] handle_ksmbd_work+0x274/0x810 [ 27.108315] process_one_work+0x419/0x760 [ 27.108689] worker_thread+0x2a2/0x6f0 [ 27.109385] kthread+0x160/0x190 [ 27.110129] ret_from_fork+0x1f/0x30 [ 27.110454] </TASK> Cc: stable(a)vger.kernel.org Signed-off-by: Chih-Yen Chang <cc85nod(a)gmail.com> Acked-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Steve French <stfrench(a)microsoft.com> Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- fs/ksmbd/smb2pdu.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 18e176fcddf0..c99b8a25f046 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -1383,7 +1383,7 @@ static struct ksmbd_user *session_user(struct ksmbd_conn *conn, struct authenticate_message *authblob; struct ksmbd_user *user; char *name; - unsigned int auth_msg_len, name_off, name_len, secbuf_len; + unsigned int name_off, name_len, secbuf_len; secbuf_len = le16_to_cpu(req->SecurityBufferLength); if (secbuf_len < sizeof(struct authenticate_message)) { @@ -1393,9 +1393,8 @@ static struct ksmbd_user *session_user(struct ksmbd_conn *conn, authblob = user_authblob(conn, req); name_off = le32_to_cpu(authblob->UserName.BufferOffset); name_len = le16_to_cpu(authblob->UserName.Length); - auth_msg_len = le16_to_cpu(req->SecurityBufferOffset) + secbuf_len; - if (auth_msg_len < (u64)name_off + name_len) + if (secbuf_len < (u64)name_off + name_len) return NULL; name = smb_strndup_from_utf16((const char *)authblob + name_off, -- 2.31.1

2 1

[PATCH OLK-5.10] ipv6/addrconf: fix a potential refcount underflow for idev
by Ziyang Xuan 19 Jul '23

19 Jul '23

mainline inclusion from mainline-v6.5-rc2 commit 06a0716949c22e2aefb648526580671197151acc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7M991 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0. Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer") Suggested-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/ipv6/addrconf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 31a0b28e4167..a2bdefcd2b30 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -314,9 +314,8 @@ static void addrconf_del_dad_work(struct inet6_ifaddr *ifp) static void addrconf_mod_rs_timer(struct inet6_dev *idev, unsigned long when) { - if (!timer_pending(&idev->rs_timer)) + if (!mod_timer(&idev->rs_timer, jiffies + when)) in6_dev_hold(idev); - mod_timer(&idev->rs_timer, jiffies + when); } static void addrconf_mod_dad_work(struct inet6_ifaddr *ifp, -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] ipv6/addrconf: fix a potential refcount underflow for idev
by Ziyang Xuan 19 Jul '23

19 Jul '23

mainline inclusion from mainline-v6.5-rc2 commit 06a0716949c22e2aefb648526580671197151acc category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7M991 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Now in addrconf_mod_rs_timer(), reference idev depends on whether rs_timer is not pending. Then modify rs_timer timeout. There is a time gap in [1], during which if the pending rs_timer becomes not pending. It will miss to hold idev, but the rs_timer is activated. Thus rs_timer callback function addrconf_rs_timer() will be executed and put idev later without holding idev. A refcount underflow issue for idev can be caused by this. if (!timer_pending(&idev->rs_timer)) in6_dev_hold(idev); <--------------[1] mod_timer(&idev->rs_timer, jiffies + when); To fix the issue, hold idev if mod_timer() return 0. Fixes: b7b1bfce0bb6 ("ipv6: split duplicate address detection and router solicitation timer") Suggested-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/ipv6/addrconf.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 9d8b791f63ef..b4f4e751e3a7 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -316,9 +316,8 @@ static void addrconf_del_dad_work(struct inet6_ifaddr *ifp) static void addrconf_mod_rs_timer(struct inet6_dev *idev, unsigned long when) { - if (!timer_pending(&idev->rs_timer)) + if (!mod_timer(&idev->rs_timer, jiffies + when)) in6_dev_hold(idev); - mod_timer(&idev->rs_timer, jiffies + when); } static void addrconf_mod_dad_work(struct inet6_ifaddr *ifp, -- 2.25.1

2 1

[PATCH OLK-5.10 0/4] fix three CVEs by backport mainline patchs
by ZhaoLong Wang 19 Jul '23

19 Jul '23

mainline patch f5c779b7ddbda("ksmbd: fix racy issue from session setup and logoff") It fixes three CVEs: CVE-2023-32250 CVE-2023-32252 CVE-2023-32257 In order to successfully apply the patch, we chose to incorporate the related pre-installed bugfix patch. Colin Ian King (1): ksmbd: Fix spelling mistake "excceed" -> "exceeded" Dawei Li (1): ksmbd: Implements sess->ksmbd_chann_list as xarray Namjae Jeon (2): ksmbd: limit pdu length size according to connection status ksmbd: fix racy issue from session setup and logoff fs/ksmbd/connection.c | 27 +++++++--- fs/ksmbd/connection.h | 39 ++++++++------ fs/ksmbd/mgmt/user_session.c | 62 +++++++++------------ fs/ksmbd/mgmt/user_session.h | 4 +- fs/ksmbd/server.c | 3 +- fs/ksmbd/smb2pdu.c | 101 +++++++++++++++++------------------ fs/ksmbd/smb2pdu.h | 5 +- fs/ksmbd/transport_tcp.c | 2 +- 8 files changed, 123 insertions(+), 120 deletions(-) -- 2.34.3

2 5

[PATCH openEuler-1.0-LTS] netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
by Ziyang Xuan 19 Jul '23

19 Jul '23

From: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> mainline inclusion from mainline-v6.5-rc2 commit caf3ef7468f7534771b5c44cd8dbd6f7f87c2cbd category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ISR1 CVE: CVE-2023-35001 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- When evaluating byteorder expressions with size 2, a union with 32-bit and 16-bit members is used. Since the 16-bit members are aligned to 32-bit, the array accesses will be out-of-bounds. It may lead to a stack-out-of-bounds access like the one below: [ 23.095215] ================================================================== [ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320 [ 23.096020] Read of size 2 at addr ffffc90000007948 by task ping/115 [ 23.096358] [ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413 [ 23.096770] Call Trace: [ 23.096910] <IRQ> [ 23.097030] dump_stack_lvl+0x60/0xc0 [ 23.097218] print_report+0xcf/0x630 [ 23.097388] ? nft_byteorder_eval+0x13c/0x320 [ 23.097577] ? kasan_addr_to_slab+0xd/0xc0 [ 23.097760] ? nft_byteorder_eval+0x13c/0x320 [ 23.097949] kasan_report+0xc9/0x110 [ 23.098106] ? nft_byteorder_eval+0x13c/0x320 [ 23.098298] __asan_load2+0x83/0xd0 [ 23.098453] nft_byteorder_eval+0x13c/0x320 [ 23.098659] nft_do_chain+0x1c8/0xc50 [ 23.098852] ? __pfx_nft_do_chain+0x10/0x10 [ 23.099078] ? __kasan_check_read+0x11/0x20 [ 23.099295] ? __pfx___lock_acquire+0x10/0x10 [ 23.099535] ? __pfx___lock_acquire+0x10/0x10 [ 23.099745] ? __kasan_check_read+0x11/0x20 [ 23.099929] nft_do_chain_ipv4+0xfe/0x140 [ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.100327] ? lock_release+0x204/0x400 [ 23.100515] ? nf_hook.constprop.0+0x340/0x550 [ 23.100779] nf_hook_slow+0x6c/0x100 [ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.101223] nf_hook.constprop.0+0x334/0x550 [ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10 [ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10 [ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.102291] ? rcu_read_lock_held+0x4b/0x70 [ 23.102481] ip_local_deliver+0xbb/0x110 [ 23.102665] ? __pfx_ip_rcv+0x10/0x10 [ 23.102839] ip_rcv+0x199/0x2a0 [ 23.102980] ? __pfx_ip_rcv+0x10/0x10 [ 23.103140] __netif_receive_skb_one_core+0x13e/0x150 [ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 23.103647] ? mark_held_locks+0x48/0xa0 [ 23.103819] ? process_backlog+0x36c/0x380 [ 23.103999] __netif_receive_skb+0x23/0xc0 [ 23.104179] process_backlog+0x91/0x380 [ 23.104350] __napi_poll.constprop.0+0x66/0x360 [ 23.104589] ? net_rx_action+0x1cb/0x610 [ 23.104811] net_rx_action+0x33e/0x610 [ 23.105024] ? _raw_spin_unlock+0x23/0x50 [ 23.105257] ? __pfx_net_rx_action+0x10/0x10 [ 23.105485] ? mark_held_locks+0x48/0xa0 [ 23.105741] __do_softirq+0xfa/0x5ab [ 23.105956] ? __dev_queue_xmit+0x765/0x1c00 [ 23.106193] do_softirq.part.0+0x49/0xc0 [ 23.106423] </IRQ> [ 23.106547] <TASK> [ 23.106670] __local_bh_enable_ip+0xf5/0x120 [ 23.106903] __dev_queue_xmit+0x789/0x1c00 [ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10 [ 23.107381] ? find_held_lock+0x8e/0xb0 [ 23.107585] ? lock_release+0x204/0x400 [ 23.107798] ? neigh_resolve_output+0x185/0x350 [ 23.108049] ? mark_held_locks+0x48/0xa0 [ 23.108265] ? neigh_resolve_output+0x185/0x350 [ 23.108514] neigh_resolve_output+0x246/0x350 [ 23.108753] ? neigh_resolve_output+0x246/0x350 [ 23.109003] ip_finish_output2+0x3c3/0x10b0 [ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10 [ 23.109510] ? __pfx_nf_hook+0x10/0x10 [ 23.109732] __ip_finish_output+0x217/0x390 [ 23.109978] ip_finish_output+0x2f/0x130 [ 23.110207] ip_output+0xc9/0x170 [ 23.110404] ip_push_pending_frames+0x1a0/0x240 [ 23.110652] raw_sendmsg+0x102e/0x19e0 [ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10 [ 23.111093] ? lock_release+0x204/0x400 [ 23.111304] ? __mod_lruvec_page_state+0x148/0x330 [ 23.111567] ? find_held_lock+0x8e/0xb0 [ 23.111777] ? find_held_lock+0x8e/0xb0 [ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0 [ 23.112225] ? aa_sk_perm+0x18a/0x550 [ 23.112431] ? filemap_map_pages+0x4f1/0x900 [ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10 [ 23.112880] ? find_held_lock+0x8e/0xb0 [ 23.113098] inet_sendmsg+0xa0/0xb0 [ 23.113297] ? inet_sendmsg+0xa0/0xb0 [ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10 [ 23.113727] sock_sendmsg+0xf4/0x100 [ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0 [ 23.114190] __sys_sendto+0x1d4/0x290 [ 23.114391] ? __pfx___sys_sendto+0x10/0x10 [ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10 [ 23.114869] ? lock_release+0x204/0x400 [ 23.115076] ? find_held_lock+0x8e/0xb0 [ 23.115287] ? rcu_is_watching+0x23/0x60 [ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860 [ 23.115778] ? __kasan_check_write+0x14/0x30 [ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770 [ 23.116285] ? mark_held_locks+0x28/0xa0 [ 23.116503] ? do_syscall_64+0x37/0x90 [ 23.116713] __x64_sys_sendto+0x7f/0xb0 [ 23.116924] do_syscall_64+0x59/0x90 [ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30 [ 23.117387] ? irqentry_exit+0x77/0xb0 [ 23.117593] ? exc_page_fault+0x92/0x140 [ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 23.118081] RIP: 0033:0x7f744aee2bba [ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 23.119237] RSP: 002b:00007ffd04a7c9f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 23.119644] RAX: ffffffffffffffda RBX: 00007ffd04a7e0a0 RCX: 00007f744aee2bba [ 23.120023] RDX: 0000000000000040 RSI: 000056488e9e6300 RDI: 0000000000000003 [ 23.120413] RBP: 000056488e9e6300 R08: 00007ffd04a80320 R09: 0000000000000010 [ 23.120809] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 23.121219] R13: 00007ffd04a7dc38 R14: 00007ffd04a7ca00 R15: 00007ffd04a7e0a0 [ 23.121617] </TASK> [ 23.121749] [ 23.121845] The buggy address belongs to the virtual mapping at [ 23.121845] [ffffc90000000000, ffffc90000009000) created by: [ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270 [ 23.122707] [ 23.122803] The buggy address belongs to the physical page: [ 23.123104] page:0000000072ac19f0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24a09 [ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 23.123998] page_type: 0xffffffff() [ 23.124194] raw: 000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000 [ 23.124610] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 23.125023] page dumped because: kasan: bad access detected [ 23.125326] [ 23.125421] Memory state around the buggy address: [ 23.125682] ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 23.126072] ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00 [ 23.126455] >ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 [ 23.126840] ^ [ 23.127138] ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 [ 23.127522] ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 23.127906] ================================================================== [ 23.128324] Disabling lock debugging due to kernel taint Using simple s16 pointers for the 16-bit accesses fixes the problem. For the 32-bit accesses, src and dst can be used directly. Fixes: 96518518cc41 ("netfilter: add nftables") Cc: stable(a)vger.kernel.org Reported-by: Tanguy DUBROCA (@SidewayRE) from @Synacktiv working with ZDI Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> Reviewed-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/netfilter/nft_byteorder.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/netfilter/nft_byteorder.c b/net/netfilter/nft_byteorder.c index 13d4e421a6b3..46a8f894717c 100644 --- a/net/netfilter/nft_byteorder.c +++ b/net/netfilter/nft_byteorder.c @@ -33,11 +33,11 @@ static void nft_byteorder_eval(const struct nft_expr *expr, const struct nft_byteorder *priv = nft_expr_priv(expr); u32 *src = &regs->data[priv->sreg]; u32 *dst = &regs->data[priv->dreg]; - union { u32 u32; u16 u16; } *s, *d; + u16 *s16, *d16; unsigned int i; - s = (void *)src; - d = (void *)dst; + s16 = (void *)src; + d16 = (void *)dst; switch (priv->size) { case 8: { @@ -63,11 +63,11 @@ static void nft_byteorder_eval(const struct nft_expr *expr, switch (priv->op) { case NFT_BYTEORDER_NTOH: for (i = 0; i < priv->len / 4; i++) - d[i].u32 = ntohl((__force __be32)s[i].u32); + dst[i] = ntohl((__force __be32)src[i]); break; case NFT_BYTEORDER_HTON: for (i = 0; i < priv->len / 4; i++) - d[i].u32 = (__force __u32)htonl(s[i].u32); + dst[i] = (__force __u32)htonl(src[i]); break; } break; @@ -75,11 +75,11 @@ static void nft_byteorder_eval(const struct nft_expr *expr, switch (priv->op) { case NFT_BYTEORDER_NTOH: for (i = 0; i < priv->len / 2; i++) - d[i].u16 = ntohs((__force __be16)s[i].u16); + d16[i] = ntohs((__force __be16)s16[i]); break; case NFT_BYTEORDER_HTON: for (i = 0; i < priv->len / 2; i++) - d[i].u16 = (__force __u16)htons(s[i].u16); + d16[i] = (__force __u16)htons(s16[i]); break; } break; -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS 0/2] Fix null-ptr-deref while calling getpeername
by Zhong Jinghua 18 Jul '23

18 Jul '23

Fix null-ptr-deref while calling getpeername Mike Christie (1): scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() Zhong Jinghua (1): scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param() drivers/scsi/iscsi_tcp.c | 72 ++++++++++++++++++++++++++++------------ drivers/scsi/iscsi_tcp.h | 2 ++ 2 files changed, 53 insertions(+), 21 deletions(-) -- 2.31.1

2 4

[PATCH openEuler-23.09] arm64/vmalloc: use module region only for module_alloc() if CONFIG_RANDOMIZE_BASE is set
by Liu Shixin 18 Jul '23

18 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7LXK8 -------------------------------- After I add a 10GB pmem device, I got the following error message when insert module: insmod: vmalloc error: size 16384, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 If CONFIG_RANDOMIZE_BASE is set, the module region can be located in the vmalloc region entirely. Although module_alloc() can fall back to a 2GB window if ARM64_MODULE_PLTS is set, the module region is still easily exhausted because the module region is located at bottom of vmalloc region and the vmalloc region is allocated from bottom to top. Skip module region if not calling from module_alloc(). Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> [cherry-pick from devel-6.1] Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> --- arch/arm64/include/asm/vmalloc.h | 26 ++++++++++++++++++++++++++ include/linux/vmalloc.h | 9 +++++++++ mm/vmalloc.c | 4 ++++ 3 files changed, 39 insertions(+) diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h index 38fafffe699f..4feff546b11b 100644 --- a/arch/arm64/include/asm/vmalloc.h +++ b/arch/arm64/include/asm/vmalloc.h @@ -31,4 +31,30 @@ static inline pgprot_t arch_vmap_pgprot_tagged(pgprot_t prot) return pgprot_tagged(prot); } +#ifdef CONFIG_RANDOMIZE_BASE +extern u64 module_alloc_base; +#define arch_vmap_skip_module_region arch_vmap_skip_module_region +static inline void arch_vmap_skip_module_region(unsigned long *addr, + unsigned long vstart, + unsigned long size, + unsigned long align) +{ + u64 module_alloc_end = module_alloc_base + MODULES_VSIZE; + + if (vstart == module_alloc_base) + return; + + if (IS_ENABLED(CONFIG_KASAN_GENERIC) || + IS_ENABLED(CONFIG_KASAN_SW_TAGS)) + /* don't exceed the static module region - see module_alloc() */ + module_alloc_end = MODULES_END; + + if ((module_alloc_base >= *addr + size) || + (module_alloc_end <= *addr)) + return; + + *addr = ALIGN(module_alloc_end, align); +} +#endif + #endif /* _ASM_ARM64_VMALLOC_H */ diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index c720be70c8dd..a7b6c2183d55 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -124,6 +124,15 @@ static inline pgprot_t arch_vmap_pgprot_tagged(pgprot_t prot) } #endif +#ifndef arch_vmap_skip_module_region +static inline void arch_vmap_skip_module_region(unsigned long *addr, + unsigned long vstart, + unsigned long size, + unsigned long align) +{ +} +#endif + /* * Highlevel APIs for driver use */ diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 1d13d71687d7..afab3c7295b4 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1230,6 +1230,8 @@ is_within_this_va(struct vmap_area *va, unsigned long size, else nva_start_addr = ALIGN(vstart, align); + arch_vmap_skip_module_region(&nva_start_addr, vstart, size, align); + /* Can be overflowed due to big size or alignment. */ if (nva_start_addr + size < nva_start_addr || nva_start_addr < vstart) @@ -1517,6 +1519,8 @@ __alloc_vmap_area(struct rb_root *root, struct list_head *head, else nva_start_addr = ALIGN(vstart, align); + arch_vmap_skip_module_region(&nva_start_addr, vstart, size, align); + /* Check the "vend" restriction. */ if (nva_start_addr + size > vend) return vend; -- 2.25.1

2 1

[PATCH openEuler-23.09 0/1] Fix module region exhausted
by Liu Shixin 18 Jul '23

18 Jul '23

Liu Shixin (1): arm64/vmalloc: use module region only for module_alloc() if CONFIG_RANDOMIZE_BASE is set arch/arm64/include/asm/vmalloc.h | 26 ++++++++++++++++++++++++++ include/linux/vmalloc.h | 9 +++++++++ mm/vmalloc.c | 4 ++++ 3 files changed, 39 insertions(+) -- 2.25.1

2 2

[PATCH OLK-5.10 1/6] workqueue: Rename "delayed" (delayed by active management) to "inactive"
by Zeng Heng 18 Jul '23

18 Jul '23

From: Lai Jiangshan <laijs(a)linux.alibaba.com> mainline inclusion from mainline-v5.15-rc1 commit f97a4a1a3f8769e3452885967955e21c88f3f263 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7LRJF Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- There are two kinds of "delayed" work items in workqueue subsystem. One is for timer-delayed work items which are visible to workqueue users. The other kind is for work items delayed by active management which can not be directly visible to workqueue users. We mixed the word "delayed" for both kinds and caused somewhat ambiguity. This patch renames the later one (delayed by active management) to "inactive", because it is used for workqueue active management and most of its related symbols are named with "active" or "activate". All "delayed" and "DELAYED" are carefully checked and renamed one by one to avoid accidentally changing the name of the other kind for timer-delayed. No functional change intended. Signed-off-by: Lai Jiangshan <laijs(a)linux.alibaba.com> Signed-off-by: Tejun Heo <tj(a)kernel.org> Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- include/linux/workqueue.h | 4 +-- kernel/workqueue.c | 58 +++++++++++++++++++-------------------- 2 files changed, 31 insertions(+), 31 deletions(-) diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 4ecfecb1202f..8067a36c9fa7 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -30,7 +30,7 @@ void delayed_work_timer_fn(struct timer_list *t); enum { WORK_STRUCT_PENDING_BIT = 0, /* work item is pending execution */ - WORK_STRUCT_DELAYED_BIT = 1, /* work item is delayed */ + WORK_STRUCT_INACTIVE_BIT= 1, /* work item is inactive */ WORK_STRUCT_PWQ_BIT = 2, /* data points to pwq */ WORK_STRUCT_LINKED_BIT = 3, /* next work is linked to this one */ #ifdef CONFIG_DEBUG_OBJECTS_WORK @@ -43,7 +43,7 @@ enum { WORK_STRUCT_COLOR_BITS = 4, WORK_STRUCT_PENDING = 1 << WORK_STRUCT_PENDING_BIT, - WORK_STRUCT_DELAYED = 1 << WORK_STRUCT_DELAYED_BIT, + WORK_STRUCT_INACTIVE = 1 << WORK_STRUCT_INACTIVE_BIT, WORK_STRUCT_PWQ = 1 << WORK_STRUCT_PWQ_BIT, WORK_STRUCT_LINKED = 1 << WORK_STRUCT_LINKED_BIT, #ifdef CONFIG_DEBUG_OBJECTS_WORK diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 9db32d9739f5..670bd33d8980 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -208,7 +208,7 @@ struct pool_workqueue { /* L: nr of in_flight works */ int nr_active; /* L: nr of active works */ int max_active; /* L: max active works */ - struct list_head delayed_works; /* L: delayed works */ + struct list_head inactive_works; /* L: inactive works */ struct list_head pwqs_node; /* WR: node on wq->pwqs */ struct list_head mayday_node; /* MD: node on wq->maydays */ @@ -1146,7 +1146,7 @@ static void put_pwq_unlocked(struct pool_workqueue *pwq) } } -static void pwq_activate_delayed_work(struct work_struct *work) +static void pwq_activate_inactive_work(struct work_struct *work) { struct pool_workqueue *pwq = get_work_pwq(work); @@ -1154,16 +1154,16 @@ static void pwq_activate_delayed_work(struct work_struct *work) if (list_empty(&pwq->pool->worklist)) pwq->pool->watchdog_ts = jiffies; move_linked_works(work, &pwq->pool->worklist, NULL); - __clear_bit(WORK_STRUCT_DELAYED_BIT, work_data_bits(work)); + __clear_bit(WORK_STRUCT_INACTIVE_BIT, work_data_bits(work)); pwq->nr_active++; } -static void pwq_activate_first_delayed(struct pool_workqueue *pwq) +static void pwq_activate_first_inactive(struct pool_workqueue *pwq) { - struct work_struct *work = list_first_entry(&pwq->delayed_works, + struct work_struct *work = list_first_entry(&pwq->inactive_works, struct work_struct, entry); - pwq_activate_delayed_work(work); + pwq_activate_inactive_work(work); } /** @@ -1186,10 +1186,10 @@ static void pwq_dec_nr_in_flight(struct pool_workqueue *pwq, int color) pwq->nr_in_flight[color]--; pwq->nr_active--; - if (!list_empty(&pwq->delayed_works)) { - /* one down, submit a delayed one */ + if (!list_empty(&pwq->inactive_works)) { + /* one down, submit an inactive one */ if (pwq->nr_active < pwq->max_active) - pwq_activate_first_delayed(pwq); + pwq_activate_first_inactive(pwq); } /* is flush in progress and are we at the flushing tip? */ @@ -1291,14 +1291,14 @@ static int try_to_grab_pending(struct work_struct *work, bool is_dwork, debug_work_deactivate(work); /* - * A delayed work item cannot be grabbed directly because + * An inactive work item cannot be grabbed directly because * it might have linked NO_COLOR work items which, if left - * on the delayed_list, will confuse pwq->nr_active + * on the inactive_works list, will confuse pwq->nr_active * management later on and cause stall. Make sure the work * item is activated before grabbing. */ - if (*work_data_bits(work) & WORK_STRUCT_DELAYED) - pwq_activate_delayed_work(work); + if (*work_data_bits(work) & WORK_STRUCT_INACTIVE) + pwq_activate_inactive_work(work); list_del_init(&work->entry); pwq_dec_nr_in_flight(pwq, get_work_color(work)); @@ -1497,8 +1497,8 @@ static void __queue_work(int cpu, struct workqueue_struct *wq, if (list_empty(worklist)) pwq->pool->watchdog_ts = jiffies; } else { - work_flags |= WORK_STRUCT_DELAYED; - worklist = &pwq->delayed_works; + work_flags |= WORK_STRUCT_INACTIVE; + worklist = &pwq->inactive_works; } debug_work_activate(work); @@ -2535,7 +2535,7 @@ static int rescuer_thread(void *__rescuer) /* * The above execution of rescued work items could * have created more to rescue through - * pwq_activate_first_delayed() or chained + * pwq_activate_first_inactive() or chained * queueing. Let's put @pwq back on mayday list so * that such back-to-back work items, which may be * being used to relieve memory pressure, don't @@ -2961,7 +2961,7 @@ void drain_workqueue(struct workqueue_struct *wq) bool drained; raw_spin_lock_irq(&pwq->pool->lock); - drained = !pwq->nr_active && list_empty(&pwq->delayed_works); + drained = !pwq->nr_active && list_empty(&pwq->inactive_works); raw_spin_unlock_irq(&pwq->pool->lock); if (drained) @@ -3717,7 +3717,7 @@ static void pwq_unbound_release_workfn(struct work_struct *work) * @pwq: target pool_workqueue * * If @pwq isn't freezing, set @pwq->max_active to the associated - * workqueue's saved_max_active and activate delayed work items + * workqueue's saved_max_active and activate inactive work items * accordingly. If @pwq is freezing, clear @pwq->max_active to zero. */ static void pwq_adjust_max_active(struct pool_workqueue *pwq) @@ -3746,9 +3746,9 @@ static void pwq_adjust_max_active(struct pool_workqueue *pwq) pwq->max_active = wq->saved_max_active; - while (!list_empty(&pwq->delayed_works) && + while (!list_empty(&pwq->inactive_works) && pwq->nr_active < pwq->max_active) { - pwq_activate_first_delayed(pwq); + pwq_activate_first_inactive(pwq); kick = true; } @@ -3779,7 +3779,7 @@ static void init_pwq(struct pool_workqueue *pwq, struct workqueue_struct *wq, pwq->wq = wq; pwq->flush_color = -1; pwq->refcnt = 1; - INIT_LIST_HEAD(&pwq->delayed_works); + INIT_LIST_HEAD(&pwq->inactive_works); INIT_LIST_HEAD(&pwq->pwqs_node); INIT_LIST_HEAD(&pwq->mayday_node); INIT_WORK(&pwq->unbound_release_work, pwq_unbound_release_workfn); @@ -4372,7 +4372,7 @@ static bool pwq_busy(struct pool_workqueue *pwq) if ((pwq != pwq->wq->dfl_pwq) && (pwq->refcnt > 1)) return true; - if (pwq->nr_active || !list_empty(&pwq->delayed_works)) + if (pwq->nr_active || !list_empty(&pwq->inactive_works)) return true; return false; @@ -4568,7 +4568,7 @@ bool workqueue_congested(int cpu, struct workqueue_struct *wq) else pwq = unbound_pwq_by_node(wq, cpu_to_node(cpu)); - ret = !list_empty(&pwq->delayed_works); + ret = !list_empty(&pwq->inactive_works); preempt_enable(); rcu_read_unlock(); @@ -4764,11 +4764,11 @@ static void show_pwq(struct pool_workqueue *pwq) pr_cont("\n"); } - if (!list_empty(&pwq->delayed_works)) { + if (!list_empty(&pwq->inactive_works)) { bool comma = false; - pr_info(" delayed:"); - list_for_each_entry(work, &pwq->delayed_works, entry) { + pr_info(" inactive:"); + list_for_each_entry(work, &pwq->inactive_works, entry) { pr_cont_work(comma, work); comma = !(*work_data_bits(work) & WORK_STRUCT_LINKED); } @@ -4798,7 +4798,7 @@ void show_workqueue_state(void) bool idle = true; for_each_pwq(pwq, wq) { - if (pwq->nr_active || !list_empty(&pwq->delayed_works)) { + if (pwq->nr_active || !list_empty(&pwq->inactive_works)) { idle = false; break; } @@ -4810,7 +4810,7 @@ void show_workqueue_state(void) for_each_pwq(pwq, wq) { raw_spin_lock_irqsave(&pwq->pool->lock, flags); - if (pwq->nr_active || !list_empty(&pwq->delayed_works)) { + if (pwq->nr_active || !list_empty(&pwq->inactive_works)) { /* * Defer printing to avoid deadlocks in console * drivers that queue work while holding locks @@ -5206,7 +5206,7 @@ EXPORT_SYMBOL_GPL(work_on_cpu_safe); * freeze_workqueues_begin - begin freezing workqueues * * Start freezing workqueues. After this function returns, all freezable - * workqueues will queue new works to their delayed_works list instead of + * workqueues will queue new works to their inactive_works list instead of * pool->worklist. * * CONTEXT: -- 2.25.1

2 6

[PATCH OLK-5.10 1/4] netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE
by Jialin Zhang 18 Jul '23

18 Jul '23

From: Pablo Neira Ayuso <pablo(a)netfilter.org> mainline inclusion from mainline-v6.4-rc7 commit 1240eb93f0616b21c675416516ff3d74798fdc97 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7H68N CVE: CVE-2023-3117 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In case of error when adding a new rule that refers to an anonymous set, deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE. Thus, the lookup expression marks anonymous sets as inactive in the next generation to ensure it is not reachable in this transaction anymore and decrement the set refcount as introduced by c1592a89942e ("netfilter: nf_tables: deactivate anonymous set from preparation phase"). The abort step takes care of undoing the anonymous set. This is also consistent with rule deletion, where NFT_TRANS_PREPARE is used. Note that this error path is exercised in the preparation step of the commit protocol. This patch replaces nf_tables_rule_release() by the deactivate and destroy calls, this time with NFT_TRANS_PREPARE. Due to this incorrect error handling, it is possible to access a dangling pointer to the anonymous set that remains in the transaction list. [1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110 [1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256 [1009.379128] Call Trace: [1009.379132] <TASK> [1009.379135] dump_stack_lvl+0x33/0x50 [1009.379146] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379191] print_address_description.constprop.0+0x27/0x300 [1009.379201] kasan_report+0x107/0x120 [1009.379210] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379255] nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379302] nft_lookup_init+0xa5/0x270 [nf_tables] [1009.379350] nf_tables_newrule+0x698/0xe50 [nf_tables] [1009.379397] ? nf_tables_rule_release+0xe0/0xe0 [nf_tables] [1009.379441] ? kasan_unpoison+0x23/0x50 [1009.379450] nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink] [1009.379470] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] [1009.379485] ? __alloc_skb+0xb8/0x1e0 [1009.379493] ? __alloc_skb+0xb8/0x1e0 [1009.379502] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [1009.379509] ? unwind_get_return_address+0x2a/0x40 [1009.379517] ? write_profile+0xc0/0xc0 [1009.379524] ? avc_lookup+0x8f/0xc0 [1009.379532] ? __rcu_read_unlock+0x43/0x60 Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> conflict: net/netfilter/nf_tables_api.c Signed-off-by: Lu Wei <luwei32(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- net/netfilter/nf_tables_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 62049daf1351..f3c4e75dc0aa 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3366,7 +3366,8 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk, return 0; err2: - nf_tables_rule_release(&ctx, rule); + nft_rule_expr_deactivate(&ctx, rule, NFT_TRANS_PREPARE); + nf_tables_rule_destroy(&ctx, rule); err1: for (i = 0; i < n; i++) { if (info[i].ops) { -- 2.25.1

2 4

[PATCH OLK-5.10] media: dvb-core: Fix use-after-free due on race condition at dvb_net
by Cai Xinchen 18 Jul '23

18 Jul '23

From: Hyunwoo Kim <imv4bel(a)gmail.com> mainline inclusion from mainline-v6.4-rc3 commit 4172385b0c9ac366dcab78eda48c26814b87ed1a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I635JD CVE: CVE-2022-45886 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?i… ---------------------------------------- A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs. The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'. So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++--- include/media/dvb_net.h | 4 ++++ 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index 10f78109bb3f..d8bdca2bf566 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -1562,15 +1562,43 @@ static long dvb_net_ioctl(struct file *file, return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl); } +static int locked_dvb_net_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + int ret; + + if (mutex_lock_interruptible(&dvbnet->remove_mutex)) + return -ERESTARTSYS; + + if (dvbnet->exit) { + mutex_unlock(&dvbnet->remove_mutex); + return -ENODEV; + } + + ret = dvb_generic_open(inode, file); + + mutex_unlock(&dvbnet->remove_mutex); + + return ret; +} + static int dvb_net_close(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_net *dvbnet = dvbdev->priv; + mutex_lock(&dvbnet->remove_mutex); + dvb_generic_release(inode, file); - if(dvbdev->users == 1 && dvbnet->exit == 1) + if (dvbdev->users == 1 && dvbnet->exit == 1) { + mutex_unlock(&dvbnet->remove_mutex); wake_up(&dvbdev->wait_queue); + } else { + mutex_unlock(&dvbnet->remove_mutex); + } + return 0; } @@ -1578,7 +1606,7 @@ static int dvb_net_close(struct inode *inode, struct file *file) static const struct file_operations dvb_net_fops = { .owner = THIS_MODULE, .unlocked_ioctl = dvb_net_ioctl, - .open = dvb_generic_open, + .open = locked_dvb_net_open, .release = dvb_net_close, .llseek = noop_llseek, }; @@ -1597,10 +1625,13 @@ void dvb_net_release (struct dvb_net *dvbnet) { int i; + mutex_lock(&dvbnet->remove_mutex); dvbnet->exit = 1; + mutex_unlock(&dvbnet->remove_mutex); + if (dvbnet->dvbdev->users < 1) wait_event(dvbnet->dvbdev->wait_queue, - dvbnet->dvbdev->users==1); + dvbnet->dvbdev->users == 1); dvb_unregister_device(dvbnet->dvbdev); @@ -1619,6 +1650,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet, int i; mutex_init(&dvbnet->ioctl_mutex); + mutex_init(&dvbnet->remove_mutex); dvbnet->demux = dmx; for (i=0; i<DVB_NET_DEVICES_MAX; i++) diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h index 5e31d37f25fa..cc01dffcc9f3 100644 --- a/include/media/dvb_net.h +++ b/include/media/dvb_net.h @@ -41,6 +41,9 @@ * @exit: flag to indicate when the device is being removed. * @demux: pointer to &struct dmx_demux. * @ioctl_mutex: protect access to this struct. + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_net. * * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network * devices. @@ -53,6 +56,7 @@ struct dvb_net { unsigned int exit:1; struct dmx_demux *demux; struct mutex ioctl_mutex; + struct mutex remove_mutex; }; /** -- 2.17.1

2 1

[PATCH openEuler-1.0-LTS 0/2] Tracing fixes
by Zheng Yejian 18 Jul '23

18 Jul '23

Tracing fixes: - Fix a deadloop in reading trace_pipe that was caused by a mismatch between ring_buffer_empty() returning false which then asked to read the data, but the read code uses rb_num_of_entries() that returned zero, and causing an infinite "retry". - Fix a warning caused by not using all pages allocated to store ftrace functions, where this can happen if the linker inserts a bunch of "NULL" entries, causing the accounting of how many pages needed to be off. Zheng Yejian (2): ring-buffer: Fix deadloop issue on reading trace_pipe ftrace: Fix possible warning on checking all pages used in ftrace_process_locs() kernel/trace/ftrace.c | 41 +++++++++++++++++++++++++++----------- kernel/trace/ring_buffer.c | 24 +++++++++++++--------- 2 files changed, 44 insertions(+), 21 deletions(-) -- 2.25.1

2 3

[PATCH OLK-5.10] media: dvb-core: Fix use-after-free due on race condition at dvb_net
by Cai Xinchen 18 Jul '23

18 Jul '23

From: Hyunwoo Kim <imv4bel(a)gmail.com> mainline inclusion from mainline-v6.4-rc3 commit 4172385b0c9ac366dcab78eda48c26814b87ed1a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I635JD CVE: CVE-2022-45886 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?i… ---------------------------------------- A race condition may occur between the .disconnect function, which is called when the device is disconnected, and the dvb_device_open() function, which is called when the device node is open()ed. This results in several types of UAFs. The root cause of this is that you use the dvb_device_open() function, which does not implement a conditional statement that checks 'dvbnet->exit'. So, add 'remove_mutex` to protect 'dvbnet->exit' and use locked_dvb_net_open() function to check 'dvbnet->exit'. [mchehab: fix a checkpatch warning] Link: https://lore.kernel.org/linux-media/20221117045925.14297-3-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/media/dvb-core/dvb_net.c | 38 +++++++++++++++++++++++++++++--- include/media/dvb_net.h | 4 ++++ 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb-core/dvb_net.c b/drivers/media/dvb-core/dvb_net.c index 10f78109bb3f..d8bdca2bf566 100644 --- a/drivers/media/dvb-core/dvb_net.c +++ b/drivers/media/dvb-core/dvb_net.c @@ -1562,15 +1562,43 @@ static long dvb_net_ioctl(struct file *file, return dvb_usercopy(file, cmd, arg, dvb_net_do_ioctl); } +static int locked_dvb_net_open(struct inode *inode, struct file *file) +{ + struct dvb_device *dvbdev = file->private_data; + struct dvb_net *dvbnet = dvbdev->priv; + int ret; + + if (mutex_lock_interruptible(&dvbnet->remove_mutex)) + return -ERESTARTSYS; + + if (dvbnet->exit) { + mutex_unlock(&dvbnet->remove_mutex); + return -ENODEV; + } + + ret = dvb_generic_open(inode, file); + + mutex_unlock(&dvbnet->remove_mutex); + + return ret; +} + static int dvb_net_close(struct inode *inode, struct file *file) { struct dvb_device *dvbdev = file->private_data; struct dvb_net *dvbnet = dvbdev->priv; + mutex_lock(&dvbnet->remove_mutex); + dvb_generic_release(inode, file); - if(dvbdev->users == 1 && dvbnet->exit == 1) + if (dvbdev->users == 1 && dvbnet->exit == 1) { + mutex_unlock(&dvbnet->remove_mutex); wake_up(&dvbdev->wait_queue); + } else { + mutex_unlock(&dvbnet->remove_mutex); + } + return 0; } @@ -1578,7 +1606,7 @@ static int dvb_net_close(struct inode *inode, struct file *file) static const struct file_operations dvb_net_fops = { .owner = THIS_MODULE, .unlocked_ioctl = dvb_net_ioctl, - .open = dvb_generic_open, + .open = locked_dvb_net_open, .release = dvb_net_close, .llseek = noop_llseek, }; @@ -1597,10 +1625,13 @@ void dvb_net_release (struct dvb_net *dvbnet) { int i; + mutex_lock(&dvbnet->remove_mutex); dvbnet->exit = 1; + mutex_unlock(&dvbnet->remove_mutex); + if (dvbnet->dvbdev->users < 1) wait_event(dvbnet->dvbdev->wait_queue, - dvbnet->dvbdev->users==1); + dvbnet->dvbdev->users == 1); dvb_unregister_device(dvbnet->dvbdev); @@ -1619,6 +1650,7 @@ int dvb_net_init (struct dvb_adapter *adap, struct dvb_net *dvbnet, int i; mutex_init(&dvbnet->ioctl_mutex); + mutex_init(&dvbnet->remove_mutex); dvbnet->demux = dmx; for (i=0; i<DVB_NET_DEVICES_MAX; i++) diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h index 5e31d37f25fa..cc01dffcc9f3 100644 --- a/include/media/dvb_net.h +++ b/include/media/dvb_net.h @@ -41,6 +41,9 @@ * @exit: flag to indicate when the device is being removed. * @demux: pointer to &struct dmx_demux. * @ioctl_mutex: protect access to this struct. + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_net. * * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network * devices. @@ -53,6 +56,7 @@ struct dvb_net { unsigned int exit:1; struct dmx_demux *demux; struct mutex ioctl_mutex; + struct mutex remove_mutex; }; /** -- 2.17.1

2 1

[PATCH openEuler-23.09] arm64/vmalloc: use module region only for module_alloc() if CONFIG_RANDOMIZE_BASE is set
by Liu Shixin 18 Jul '23

18 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6DAD6 -------------------------------- After I add a 10GB pmem device, I got the following error message when insert module: insmod: vmalloc error: size 16384, vm_struct allocation failed, mode:0xcc0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 If CONFIG_RANDOMIZE_BASE is set, the module region can be located in the vmalloc region entirely. Although module_alloc() can fall back to a 2GB window if ARM64_MODULE_PLTS is set, the module region is still easily exhausted because the module region is located at bottom of vmalloc region and the vmalloc region is allocated from bottom to top. Skip module region if not calling from module_alloc(). Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> [cherry-pick from devel-6.1] Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> --- arch/arm64/include/asm/vmalloc.h | 26 ++++++++++++++++++++++++++ include/linux/vmalloc.h | 9 +++++++++ mm/vmalloc.c | 4 ++++ 3 files changed, 39 insertions(+) diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h index 38fafffe699f..4feff546b11b 100644 --- a/arch/arm64/include/asm/vmalloc.h +++ b/arch/arm64/include/asm/vmalloc.h @@ -31,4 +31,30 @@ static inline pgprot_t arch_vmap_pgprot_tagged(pgprot_t prot) return pgprot_tagged(prot); } +#ifdef CONFIG_RANDOMIZE_BASE +extern u64 module_alloc_base; +#define arch_vmap_skip_module_region arch_vmap_skip_module_region +static inline void arch_vmap_skip_module_region(unsigned long *addr, + unsigned long vstart, + unsigned long size, + unsigned long align) +{ + u64 module_alloc_end = module_alloc_base + MODULES_VSIZE; + + if (vstart == module_alloc_base) + return; + + if (IS_ENABLED(CONFIG_KASAN_GENERIC) || + IS_ENABLED(CONFIG_KASAN_SW_TAGS)) + /* don't exceed the static module region - see module_alloc() */ + module_alloc_end = MODULES_END; + + if ((module_alloc_base >= *addr + size) || + (module_alloc_end <= *addr)) + return; + + *addr = ALIGN(module_alloc_end, align); +} +#endif + #endif /* _ASM_ARM64_VMALLOC_H */ diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index c720be70c8dd..a7b6c2183d55 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -124,6 +124,15 @@ static inline pgprot_t arch_vmap_pgprot_tagged(pgprot_t prot) } #endif +#ifndef arch_vmap_skip_module_region +static inline void arch_vmap_skip_module_region(unsigned long *addr, + unsigned long vstart, + unsigned long size, + unsigned long align) +{ +} +#endif + /* * Highlevel APIs for driver use */ diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 1d13d71687d7..afab3c7295b4 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -1230,6 +1230,8 @@ is_within_this_va(struct vmap_area *va, unsigned long size, else nva_start_addr = ALIGN(vstart, align); + arch_vmap_skip_module_region(&nva_start_addr, vstart, size, align); + /* Can be overflowed due to big size or alignment. */ if (nva_start_addr + size < nva_start_addr || nva_start_addr < vstart) @@ -1517,6 +1519,8 @@ __alloc_vmap_area(struct rb_root *root, struct list_head *head, else nva_start_addr = ALIGN(vstart, align); + arch_vmap_skip_module_region(&nva_start_addr, vstart, size, align); + /* Check the "vend" restriction. */ if (nva_start_addr + size > vend) return vend; -- 2.25.1

2 1

[PATCH OLK-5.10 0/4] Tracing fixes
by Zheng Yejian 18 Jul '23

18 Jul '23

Tracing fixes: - Fix a deadloop in reading trace_pipe that was caused by a mismatch between ring_buffer_empty() returning false which then asked to read the data, but the read code uses rb_num_of_entries() that returned zero, and causing an infinite "retry". - Fix a warning caused by not using all pages allocated to store ftrace functions, where this can happen if the linker inserts a bunch of "NULL" entries, causing the accounting of how many pages needed to be off. - Fix memory leak in freeing iter->temp in tracing_release_pipe(). Linus Torvalds (1): ftrace: Store the order of pages allocated in ftrace_page Zheng Yejian (3): ring-buffer: Fix deadloop issue on reading trace_pipe tracing: Fix memory leak of iter->temp when reading trace_pipe ftrace: Fix possible warning on checking all pages used in ftrace_process_locs() kernel/trace/ftrace.c | 72 +++++++++++++++++++++++--------------- kernel/trace/ring_buffer.c | 24 ++++++++----- kernel/trace/trace.c | 1 + 3 files changed, 60 insertions(+), 37 deletions(-) -- 2.25.1

2 5

[PATCH openEuler-1.0-LTS] KVM: fix overflow of zero page refcount with ksm running
by Lei Chen 18 Jul '23

18 Jul '23

From: Zhuang Yanying <ann.zhuangyanying(a)huawei.com> mainline inclusion from mainline-v5.10 commit 7df003c85218b5f5b10a7f6418208f31e813f38f category: bugfix -------------------------------- We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng <linfeng23(a)huawei.com> Signed-off-by: Zhuang Yanying <ann.zhuangyanying(a)huawei.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Lei Chen <lei.chen(a)smartx.com> --- virt/kvm/kvm_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 96fb21ac7224..e4e3dc429ec4 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -170,6 +170,7 @@ bool kvm_is_reserved_pfn(kvm_pfn_t pfn) */ if (pfn_valid(pfn)) return PageReserved(pfn_to_page(pfn)) && + !is_zero_pfn(pfn) && !kvm_is_zone_device_pfn(pfn); return true; -- 2.34.1

2 1

[PATCH OLK-5.10] Fix the default return value of dm_pool_dec_data_range()
by Li Lingfeng 18 Jul '23

18 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7LJO8 CVE: NA -------------------------------- Commit 26d0b2da7317 ("dm thin metadata: check fail_io before using data_sm") change the defalut return value of dm_pool_dec_data_range(), so fix it. Fixes: 26d0b2da7317 ("dm thin metadata: check fail_io before using data_sm") Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-thin-metadata.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 69401bfac76e..551ae1cd3c43 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1806,7 +1806,7 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e) { - int r = -EINVAL; + int r = 0; pmd_write_lock(pmd); if (!pmd->fail_io) { -- 2.31.1

2 1

[PATCH OLK-5.10] netfilter: nf_tables: prevent OOB access in nft_byteorder_eval
by Ziyang Xuan 18 Jul '23

18 Jul '23

From: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> mainline inclusion from mainline-v6.5-rc2 commit caf3ef7468f7534771b5c44cd8dbd6f7f87c2cbd category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ISR1 CVE: CVE-2023-35001 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- When evaluating byteorder expressions with size 2, a union with 32-bit and 16-bit members is used. Since the 16-bit members are aligned to 32-bit, the array accesses will be out-of-bounds. It may lead to a stack-out-of-bounds access like the one below: [ 23.095215] ================================================================== [ 23.095625] BUG: KASAN: stack-out-of-bounds in nft_byteorder_eval+0x13c/0x320 [ 23.096020] Read of size 2 at addr ffffc90000007948 by task ping/115 [ 23.096358] [ 23.096456] CPU: 0 PID: 115 Comm: ping Not tainted 6.4.0+ #413 [ 23.096770] Call Trace: [ 23.096910] <IRQ> [ 23.097030] dump_stack_lvl+0x60/0xc0 [ 23.097218] print_report+0xcf/0x630 [ 23.097388] ? nft_byteorder_eval+0x13c/0x320 [ 23.097577] ? kasan_addr_to_slab+0xd/0xc0 [ 23.097760] ? nft_byteorder_eval+0x13c/0x320 [ 23.097949] kasan_report+0xc9/0x110 [ 23.098106] ? nft_byteorder_eval+0x13c/0x320 [ 23.098298] __asan_load2+0x83/0xd0 [ 23.098453] nft_byteorder_eval+0x13c/0x320 [ 23.098659] nft_do_chain+0x1c8/0xc50 [ 23.098852] ? __pfx_nft_do_chain+0x10/0x10 [ 23.099078] ? __kasan_check_read+0x11/0x20 [ 23.099295] ? __pfx___lock_acquire+0x10/0x10 [ 23.099535] ? __pfx___lock_acquire+0x10/0x10 [ 23.099745] ? __kasan_check_read+0x11/0x20 [ 23.099929] nft_do_chain_ipv4+0xfe/0x140 [ 23.100105] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.100327] ? lock_release+0x204/0x400 [ 23.100515] ? nf_hook.constprop.0+0x340/0x550 [ 23.100779] nf_hook_slow+0x6c/0x100 [ 23.100977] ? __pfx_nft_do_chain_ipv4+0x10/0x10 [ 23.101223] nf_hook.constprop.0+0x334/0x550 [ 23.101443] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.101677] ? __pfx_nf_hook.constprop.0+0x10/0x10 [ 23.101882] ? __pfx_ip_rcv_finish+0x10/0x10 [ 23.102071] ? __pfx_ip_local_deliver_finish+0x10/0x10 [ 23.102291] ? rcu_read_lock_held+0x4b/0x70 [ 23.102481] ip_local_deliver+0xbb/0x110 [ 23.102665] ? __pfx_ip_rcv+0x10/0x10 [ 23.102839] ip_rcv+0x199/0x2a0 [ 23.102980] ? __pfx_ip_rcv+0x10/0x10 [ 23.103140] __netif_receive_skb_one_core+0x13e/0x150 [ 23.103362] ? __pfx___netif_receive_skb_one_core+0x10/0x10 [ 23.103647] ? mark_held_locks+0x48/0xa0 [ 23.103819] ? process_backlog+0x36c/0x380 [ 23.103999] __netif_receive_skb+0x23/0xc0 [ 23.104179] process_backlog+0x91/0x380 [ 23.104350] __napi_poll.constprop.0+0x66/0x360 [ 23.104589] ? net_rx_action+0x1cb/0x610 [ 23.104811] net_rx_action+0x33e/0x610 [ 23.105024] ? _raw_spin_unlock+0x23/0x50 [ 23.105257] ? __pfx_net_rx_action+0x10/0x10 [ 23.105485] ? mark_held_locks+0x48/0xa0 [ 23.105741] __do_softirq+0xfa/0x5ab [ 23.105956] ? __dev_queue_xmit+0x765/0x1c00 [ 23.106193] do_softirq.part.0+0x49/0xc0 [ 23.106423] </IRQ> [ 23.106547] <TASK> [ 23.106670] __local_bh_enable_ip+0xf5/0x120 [ 23.106903] __dev_queue_xmit+0x789/0x1c00 [ 23.107131] ? __pfx___dev_queue_xmit+0x10/0x10 [ 23.107381] ? find_held_lock+0x8e/0xb0 [ 23.107585] ? lock_release+0x204/0x400 [ 23.107798] ? neigh_resolve_output+0x185/0x350 [ 23.108049] ? mark_held_locks+0x48/0xa0 [ 23.108265] ? neigh_resolve_output+0x185/0x350 [ 23.108514] neigh_resolve_output+0x246/0x350 [ 23.108753] ? neigh_resolve_output+0x246/0x350 [ 23.109003] ip_finish_output2+0x3c3/0x10b0 [ 23.109250] ? __pfx_ip_finish_output2+0x10/0x10 [ 23.109510] ? __pfx_nf_hook+0x10/0x10 [ 23.109732] __ip_finish_output+0x217/0x390 [ 23.109978] ip_finish_output+0x2f/0x130 [ 23.110207] ip_output+0xc9/0x170 [ 23.110404] ip_push_pending_frames+0x1a0/0x240 [ 23.110652] raw_sendmsg+0x102e/0x19e0 [ 23.110871] ? __pfx_raw_sendmsg+0x10/0x10 [ 23.111093] ? lock_release+0x204/0x400 [ 23.111304] ? __mod_lruvec_page_state+0x148/0x330 [ 23.111567] ? find_held_lock+0x8e/0xb0 [ 23.111777] ? find_held_lock+0x8e/0xb0 [ 23.111993] ? __rcu_read_unlock+0x7c/0x2f0 [ 23.112225] ? aa_sk_perm+0x18a/0x550 [ 23.112431] ? filemap_map_pages+0x4f1/0x900 [ 23.112665] ? __pfx_aa_sk_perm+0x10/0x10 [ 23.112880] ? find_held_lock+0x8e/0xb0 [ 23.113098] inet_sendmsg+0xa0/0xb0 [ 23.113297] ? inet_sendmsg+0xa0/0xb0 [ 23.113500] ? __pfx_inet_sendmsg+0x10/0x10 [ 23.113727] sock_sendmsg+0xf4/0x100 [ 23.113924] ? move_addr_to_kernel.part.0+0x4f/0xa0 [ 23.114190] __sys_sendto+0x1d4/0x290 [ 23.114391] ? __pfx___sys_sendto+0x10/0x10 [ 23.114621] ? __pfx_mark_lock.part.0+0x10/0x10 [ 23.114869] ? lock_release+0x204/0x400 [ 23.115076] ? find_held_lock+0x8e/0xb0 [ 23.115287] ? rcu_is_watching+0x23/0x60 [ 23.115503] ? __rseq_handle_notify_resume+0x6e2/0x860 [ 23.115778] ? __kasan_check_write+0x14/0x30 [ 23.116008] ? blkcg_maybe_throttle_current+0x8d/0x770 [ 23.116285] ? mark_held_locks+0x28/0xa0 [ 23.116503] ? do_syscall_64+0x37/0x90 [ 23.116713] __x64_sys_sendto+0x7f/0xb0 [ 23.116924] do_syscall_64+0x59/0x90 [ 23.117123] ? irqentry_exit_to_user_mode+0x25/0x30 [ 23.117387] ? irqentry_exit+0x77/0xb0 [ 23.117593] ? exc_page_fault+0x92/0x140 [ 23.117806] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 23.118081] RIP: 0033:0x7f744aee2bba [ 23.118282] Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 [ 23.119237] RSP: 002b:00007ffd04a7c9f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 23.119644] RAX: ffffffffffffffda RBX: 00007ffd04a7e0a0 RCX: 00007f744aee2bba [ 23.120023] RDX: 0000000000000040 RSI: 000056488e9e6300 RDI: 0000000000000003 [ 23.120413] RBP: 000056488e9e6300 R08: 00007ffd04a80320 R09: 0000000000000010 [ 23.120809] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 23.121219] R13: 00007ffd04a7dc38 R14: 00007ffd04a7ca00 R15: 00007ffd04a7e0a0 [ 23.121617] </TASK> [ 23.121749] [ 23.121845] The buggy address belongs to the virtual mapping at [ 23.121845] [ffffc90000000000, ffffc90000009000) created by: [ 23.121845] irq_init_percpu_irqstack+0x1cf/0x270 [ 23.122707] [ 23.122803] The buggy address belongs to the physical page: [ 23.123104] page:0000000072ac19f0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x24a09 [ 23.123609] flags: 0xfffffc0001000(reserved|node=0|zone=1|lastcpupid=0x1fffff) [ 23.123998] page_type: 0xffffffff() [ 23.124194] raw: 000fffffc0001000 ffffea0000928248 ffffea0000928248 0000000000000000 [ 23.124610] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 23.125023] page dumped because: kasan: bad access detected [ 23.125326] [ 23.125421] Memory state around the buggy address: [ 23.125682] ffffc90000007800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 23.126072] ffffc90000007880: 00 00 00 00 00 f1 f1 f1 f1 f1 f1 00 00 f2 f2 00 [ 23.126455] >ffffc90000007900: 00 00 00 00 00 00 00 00 00 f2 f2 f2 f2 00 00 00 [ 23.126840] ^ [ 23.127138] ffffc90000007980: 00 00 00 00 00 00 00 00 00 00 00 00 00 f3 f3 f3 [ 23.127522] ffffc90000007a00: f3 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 [ 23.127906] ================================================================== [ 23.128324] Disabling lock debugging due to kernel taint Using simple s16 pointers for the 16-bit accesses fixes the problem. For the 32-bit accesses, src and dst can be used directly. Fixes: 96518518cc41 ("netfilter: add nftables") Cc: stable(a)vger.kernel.org Reported-by: Tanguy DUBROCA (@SidewayRE) from @Synacktiv working with ZDI Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> Reviewed-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/netfilter/nft_byteorder.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/net/netfilter/nft_byteorder.c b/net/netfilter/nft_byteorder.c index 9d5947ab8d4e..7b0b8fecb220 100644 --- a/net/netfilter/nft_byteorder.c +++ b/net/netfilter/nft_byteorder.c @@ -30,11 +30,11 @@ void nft_byteorder_eval(const struct nft_expr *expr, const struct nft_byteorder *priv = nft_expr_priv(expr); u32 *src = &regs->data[priv->sreg]; u32 *dst = &regs->data[priv->dreg]; - union { u32 u32; u16 u16; } *s, *d; + u16 *s16, *d16; unsigned int i; - s = (void *)src; - d = (void *)dst; + s16 = (void *)src; + d16 = (void *)dst; switch (priv->size) { case 8: { @@ -61,11 +61,11 @@ void nft_byteorder_eval(const struct nft_expr *expr, switch (priv->op) { case NFT_BYTEORDER_NTOH: for (i = 0; i < priv->len / 4; i++) - d[i].u32 = ntohl((__force __be32)s[i].u32); + dst[i] = ntohl((__force __be32)src[i]); break; case NFT_BYTEORDER_HTON: for (i = 0; i < priv->len / 4; i++) - d[i].u32 = (__force __u32)htonl(s[i].u32); + dst[i] = (__force __u32)htonl(src[i]); break; } break; @@ -73,11 +73,11 @@ void nft_byteorder_eval(const struct nft_expr *expr, switch (priv->op) { case NFT_BYTEORDER_NTOH: for (i = 0; i < priv->len / 2; i++) - d[i].u16 = ntohs((__force __be16)s[i].u16); + d16[i] = ntohs((__force __be16)s16[i]); break; case NFT_BYTEORDER_HTON: for (i = 0; i < priv->len / 2; i++) - d[i].u16 = (__force __u16)htons(s[i].u16); + d16[i] = (__force __u16)htons(s16[i]); break; } break; -- 2.25.1

2 1

[PATCH OLK-5.10] anolis: bond: broadcast ARP or ND messages to all slaves
by Wang Yufen 18 Jul '23

18 Jul '23

From: Tony Lu <tonylu(a)linux.alibaba.com> anolis inclusion from devel-5.10-v5.10.134-12 commit b90e28f7170e1ae40c572f9f80a50bbdc8f8b99f category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I697AN CVE: NA Reference: https://gitee.com/anolis/cloud-kernel/commit/b90e28f7170e1ae40c572f9f80a50b… --------------------------- OpenAnolis Bug Tracker:0000282 This is achieved by broadcasting ARP or ND packets to all of its slave devices on transmit side. The switch will take further actions based on proper configuration. A new sysctl knob "net.bonding.broadcast_arp_or_nd" is introduced which controls the behaviour of broadcasting. Signed-off-by: Tony Lu <tonylu(a)linux.alibaba.com> Acked-by: Dust Li <dust.li(a)linux.alibaba.com> Signed-off-by: Qiao Ma <mqaio(a)linux.alibaba.com> Reviewed-by: Shile Zhang <shile.zhang(a)linux.alibaba.com> Acked-by: Dust Li <dust.li(a)linux.alibaba.com> Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- Documentation/networking/ip-sysctl.rst | 11 ++++++++++ drivers/net/bonding/Makefile | 2 +- drivers/net/bonding/bond_main.c | 40 ++++++++++++++++++++++++++++++++++ drivers/net/bonding/bond_sysctl.c | 32 +++++++++++++++++++++++++++ include/net/bonding.h | 4 ++++ 5 files changed, 88 insertions(+), 1 deletion(-) create mode 100644 drivers/net/bonding/bond_sysctl.c diff --git a/Documentation/networking/ip-sysctl.rst b/Documentation/networking/ip-sysctl.rst index df26cf4..b27b887 100644 --- a/Documentation/networking/ip-sysctl.rst +++ b/Documentation/networking/ip-sysctl.rst @@ -2665,3 +2665,14 @@ max_dgram_qlen - INTEGER Default: 10 + +``/proc/sys/net/bonding/*`` +======================== + +broadcast_arp_or_nd - INTEGER + Control broadcasting ARP or ND messages to all slaves + + 0: Not broadcasting + 1: Broadcasting + + Default: 0 diff --git a/drivers/net/bonding/Makefile b/drivers/net/bonding/Makefile index 30e8ae3..9dd55d9 100644 --- a/drivers/net/bonding/Makefile +++ b/drivers/net/bonding/Makefile @@ -5,7 +5,7 @@ obj-$(CONFIG_BONDING) += bonding.o -bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_sysfs_slave.o bond_debugfs.o bond_netlink.o bond_options.o +bonding-objs := bond_main.o bond_3ad.o bond_alb.o bond_sysfs.o bond_sysfs_slave.o bond_debugfs.o bond_netlink.o bond_options.o bond_sysctl.o proc-$(CONFIG_PROC_FS) += bond_procfs.o bonding-objs += $(proc-y) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1610067..ec0a4d942 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4559,6 +4559,39 @@ int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave) return ret; } +/* Check whether the skb is arp or nd msg */ +static inline bool skb_is_arp_or_nd(struct sk_buff *skb) +{ + switch (ntohs(skb->protocol)) { + case ETH_P_ARP: + return true; + case ETH_P_IPV6: + if (pskb_may_pull(skb, sizeof(struct ipv6hdr) + + sizeof(struct nd_msg))) { + struct ipv6hdr *hdr = ipv6_hdr(skb); + u8 nexthdr = hdr->nexthdr; + struct icmp6hdr *icmp6; + + if (nexthdr == IPPROTO_ICMPV6) { + icmp6 = icmp6_hdr(skb); + + if ((icmp6->icmp6_type == + NDISC_NEIGHBOUR_SOLICITATION || + icmp6->icmp6_type == + NDISC_NEIGHBOUR_ADVERTISEMENT) && + icmp6->icmp6_code == 0) { + return true; + } + } + } + } + + return false; +} + +static netdev_tx_t bond_xmit_broadcast(struct sk_buff *skb, + struct net_device *bond_dev); + static struct slave *bond_xmit_3ad_xor_slave_get(struct bonding *bond, struct sk_buff *skb, struct bond_up_slave *slaves) @@ -4587,6 +4620,10 @@ static netdev_tx_t bond_3ad_xor_xmit(struct sk_buff *skb, struct bond_up_slave *slaves; struct slave *slave; + /* Broadcast to all slaves. */ + if (sysctl_bond_broadcast_arp_or_nd && skb_is_arp_or_nd(skb)) + return bond_xmit_broadcast(skb, dev); + slaves = rcu_dereference(bond->usable_slaves); slave = bond_xmit_3ad_xor_slave_get(bond, skb, slaves); if (likely(slave)) @@ -5503,6 +5540,7 @@ static int __init bonding_init(void) goto err_link; bond_create_debugfs(); + bond_create_sysctl(); for (i = 0; i < max_bonds; i++) { res = bond_create(&init_net, NULL); @@ -5519,6 +5557,7 @@ static int __init bonding_init(void) return res; err: bond_destroy_debugfs(); + bond_destroy_sysctl(); bond_netlink_fini(); err_link: unregister_pernet_subsys(&bond_net_ops); @@ -5531,6 +5570,7 @@ static void __exit bonding_exit(void) unregister_netdevice_notifier(&bond_netdev_notifier); bond_destroy_debugfs(); + bond_destroy_sysctl(); bond_netlink_fini(); unregister_pernet_subsys(&bond_net_ops); diff --git a/drivers/net/bonding/bond_sysctl.c b/drivers/net/bonding/bond_sysctl.c new file mode 100644 index 0000000..17404d3 --- /dev/null +++ b/drivers/net/bonding/bond_sysctl.c @@ -0,0 +1,32 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <net/net_namespace.h> +#include <linux/sysctl.h> +#include <net/bonding.h> + +int sysctl_bond_broadcast_arp_or_nd __read_mostly; +EXPORT_SYMBOL(sysctl_bond_broadcast_arp_or_nd); + +struct ctl_table_header *bond_broadcast_arp_or_nd_table_header; + +static struct ctl_table bond_broadcast_arp_or_nd_table[] = { + { + .procname = "broadcast_arp_or_nd", + .data = &sysctl_bond_broadcast_arp_or_nd, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec, + }, + {} +}; + +void bond_create_sysctl(void) +{ + bond_broadcast_arp_or_nd_table_header = + register_net_sysctl(&init_net, "net/bonding", + bond_broadcast_arp_or_nd_table); +} + +void bond_destroy_sysctl(void) +{ + unregister_net_sysctl_table(bond_broadcast_arp_or_nd_table_header); +} diff --git a/include/net/bonding.h b/include/net/bonding.h index d9cc3f5..467c9da 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -114,6 +114,8 @@ static inline int is_netpoll_tx_blocked(struct net_device *dev) #define is_netpoll_tx_blocked(dev) (0) #endif +extern int sysctl_bond_broadcast_arp_or_nd; + struct bond_params { int mode; int xmit_policy; @@ -659,6 +661,8 @@ struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev, int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave); void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay); void bond_work_init_all(struct bonding *bond); +void bond_create_sysctl(void); +void bond_destroy_sysctl(void); #ifdef CONFIG_PROC_FS void bond_create_proc_entry(struct bonding *bond); -- 1.8.3.1

2 1

[PATCH 4.19 1/2] ring-buffer: Fix deadloop issue on reading trace_pipe
by Yongqiang Liu 18 Jul '23

18 Jul '23

From: Zheng Yejian <zhengyejian1(a)huawei.com> mainline inclusion from mainline-v6.5-rc2 commit 7e42907f3a7b4ce3a2d1757f6d78336984daf8f5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7KXY9 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Soft lockup occurs when reading file 'trace_pipe': watchdog: BUG: soft lockup - CPU#6 stuck for 22s! [cat:4488] [...] RIP: 0010:ring_buffer_empty_cpu+0xed/0x170 RSP: 0018:ffff88810dd6fc48 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000246 RCX: ffffffff93d1aaeb RDX: ffff88810a280040 RSI: 0000000000000008 RDI: ffff88811164b218 RBP: ffff88811164b218 R08: 0000000000000000 R09: ffff88815156600f R10: ffffed102a2acc01 R11: 0000000000000001 R12: 0000000051651901 R13: 0000000000000000 R14: ffff888115e49500 R15: 0000000000000000 [...] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8d853c2000 CR3: 000000010dcd8000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __find_next_entry+0x1a8/0x4b0 ? peek_next_entry+0x250/0x250 ? down_write+0xa5/0x120 ? down_write_killable+0x130/0x130 trace_find_next_entry_inc+0x3b/0x1d0 tracing_read_pipe+0x423/0xae0 ? tracing_splice_read_pipe+0xcb0/0xcb0 vfs_read+0x16b/0x490 ksys_read+0x105/0x210 ? __ia32_sys_pwrite64+0x200/0x200 ? switch_fpu_return+0x108/0x220 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x61/0xc6 Through the vmcore, I found it's because in tracing_read_pipe(), ring_buffer_empty_cpu() found some buffer is not empty but then it cannot read anything due to "rb_num_of_entries() == 0" always true, Then it infinitely loop the procedure due to user buffer not been filled, see following code path: tracing_read_pipe() { ... ... waitagain: tracing_wait_pipe() // 1. find non-empty buffer here trace_find_next_entry_inc() // 2. loop here try to find an entry __find_next_entry() ring_buffer_empty_cpu(); // 3. find non-empty buffer peek_next_entry() // 4. but peek always return NULL ring_buffer_peek() rb_buffer_peek() rb_get_reader_page() // 5. because rb_num_of_entries() == 0 always true here // then return NULL // 6. user buffer not been filled so goto 'waitgain' // and eventually leads to an deadloop in kernel!!! } By some analyzing, I found that when resetting ringbuffer, the 'entries' of its pages are not all cleared (see rb_reset_cpu()). Then when reducing the ringbuffer, and if some reduced pages exist dirty 'entries' data, they will be added into 'cpu_buffer->overrun' (see rb_remove_pages()), which cause wrong 'overrun' count and eventually cause the deadloop issue. To fix it, we need to clear every pages in rb_reset_cpu(). Link: https://lore.kernel.org/linux-trace-kernel/20230708225144.3785600-1-zhengye… Cc: stable(a)vger.kernel.org Fixes: a5fb833172eca ("ring-buffer: Fix uninitialized read_stamp") Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- kernel/trace/ring_buffer.c | 24 +++++++++++++++--------- 1 file changed, 15 insertions(+), 9 deletions(-) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 3f098e32a7df..176777060349 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -4407,28 +4407,34 @@ unsigned long ring_buffer_size(struct ring_buffer *buffer, int cpu) } EXPORT_SYMBOL_GPL(ring_buffer_size); +static void rb_clear_buffer_page(struct buffer_page *page) +{ + local_set(&page->write, 0); + local_set(&page->entries, 0); + rb_init_page(page->page); + page->read = 0; +} + static void rb_reset_cpu(struct ring_buffer_per_cpu *cpu_buffer) { + struct buffer_page *page; + rb_head_page_deactivate(cpu_buffer); cpu_buffer->head_page = list_entry(cpu_buffer->pages, struct buffer_page, list); - local_set(&cpu_buffer->head_page->write, 0); - local_set(&cpu_buffer->head_page->entries, 0); - local_set(&cpu_buffer->head_page->page->commit, 0); - - cpu_buffer->head_page->read = 0; + rb_clear_buffer_page(cpu_buffer->head_page); + list_for_each_entry(page, cpu_buffer->pages, list) { + rb_clear_buffer_page(page); + } cpu_buffer->tail_page = cpu_buffer->head_page; cpu_buffer->commit_page = cpu_buffer->head_page; INIT_LIST_HEAD(&cpu_buffer->reader_page->list); INIT_LIST_HEAD(&cpu_buffer->new_pages); - local_set(&cpu_buffer->reader_page->write, 0); - local_set(&cpu_buffer->reader_page->entries, 0); - local_set(&cpu_buffer->reader_page->page->commit, 0); - cpu_buffer->reader_page->read = 0; + rb_clear_buffer_page(cpu_buffer->reader_page); local_set(&cpu_buffer->entries_bytes, 0); local_set(&cpu_buffer->overrun, 0); -- 2.25.1

1 1

[PATCH openEuler-23.09 0/1] kernel: add OPENEULER_VERSION_CODE to version.h
by Xie XiuQi 18 Jul '23

18 Jul '23

Add OPENEULER_VERSION_CODE to version.h, so modules or applications can identify the specific kernel version. In most cases, the out-of-tree module needs to identify the release version of the openEuler for interface adaptation. The existing OPENEULER_VERSION() and OPENEULER_VERSION_CODE() cannot distinguish between LTS versions and innovative versions. Therefore, a new macro OPENEULER_LTS is introduced. The version information is generated in "linux/version.h", as bellow: include/generated/uapi/linux/version.h ``` #define OPENEULER_LTS 0 // 1: LTS; 0: none LTS #define OPENEULER_MAJOR 9999 // OS Major version, 9999: none released #define OPENEULER_MINOR 0 // SP release version #define OPENEULER_VERSION(a,b) (((a) << 8) + (b)) #define OPENEULER_VERSION_CODE 2559744 ``` Use Makefile.oever to avoid future merge conflicts. Xie XiuQi (1): kernel: add OPENEULER_VERSION_CODE to version.h Makefile | 11 ++++++++++- Makefile.oever | 4 ++++ 2 files changed, 14 insertions(+), 1 deletion(-) create mode 100644 Makefile.oever -- 2.20.1

2 2

[PATCH OLK-5.10 0/4] Fix CVE-2023-3117
by Lu Wei 17 Jul '23

17 Jul '23

Pablo Neira Ayuso (4): netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE netfilter: nf_tables: fix chain binding transaction logic netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: unbind non-anonymous set if rule construction fails include/net/netfilter/nf_tables.h | 23 +++++- net/netfilter/nf_tables_api.c | 126 +++++++++++++++++++++--------- net/netfilter/nft_immediate.c | 90 ++++++++++++++++++--- 3 files changed, 194 insertions(+), 45 deletions(-) -- 2.31.1

1 4

[OLK-5.10,0/4] Fix CVE-2023-3117
by Lu Wei 17 Jul '23

17 Jul '23

Pablo Neira Ayuso (4): netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE netfilter: nf_tables: fix chain binding transaction logic netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: unbind non-anonymous set if rule construction fails include/net/netfilter/nf_tables.h | 23 +++++- net/netfilter/nf_tables_api.c | 126 +++++++++++++++++++++--------- net/netfilter/nft_immediate.c | 90 ++++++++++++++++++--- 3 files changed, 194 insertions(+), 45 deletions(-) -- 2.31.1

1 4

[PATCH OLK-5.10 1/3] arm64: cpufeatures: Add capability for LDAPR instruction
by Zeng Heng 17 Jul '23

17 Jul '23

From: Will Deacon <will(a)kernel.org> mainline inclusion from mainline-v5.11-rc1 commit 364a5a8ae8dc2dd457e2fefb4da3f3fd2c0ba8b1 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7LP2Z Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Armv8.3 introduced the LDAPR instruction, which provides weaker memory ordering semantics than LDARi (RCpc vs RCsc). Generally, we provide an RCsc implementation when implementing the Linux memory model, but LDAPR can be used as a useful alternative to dependency ordering, particularly when the compiler is capable of breaking the dependencies. Since LDAPR is not available on all CPUs, add a cpufeature to detect it at runtime and allow the instruction to be used with alternative code patching. Acked-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Acked-by: Mark Rutland <mark.rutland(a)arm.com> Signed-off-by: Will Deacon <will(a)kernel.org> Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- arch/arm64/Kconfig | 5 ++++- arch/arm64/include/asm/cpucaps.h | 1 + arch/arm64/kernel/cpufeature.c | 10 ++++++++++ 3 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 75da7a29aa19..e2c2219d5ec4 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -510,7 +510,7 @@ config ARM64_ERRATUM_1742098 are only present if the cryptography extensions are present. All software should have a fallback implementation for CPUs that don't implement the cryptography extensions. - + If unsure, say Y. config ARM64_ERRATUM_845719 @@ -1767,6 +1767,9 @@ config ARM64_AMU_EXTN config AS_HAS_ARMV8_4 def_bool $(cc-option,-Wa$(comma)-march=armv8.4-a) +config AS_HAS_LDAPR + def_bool $(as-instr,.arch_extension rcpc) + config ARM64_TLB_RANGE bool "Enable support for tlbi range feature" default y diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index b43f8e374114..c7fe08dce205 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -75,6 +75,7 @@ #define ARM64_WORKAROUND_1742098 67 #define ARM64_HAS_WFXT 68 #define ARM64_WORKAROUND_HISILICON_ERRATUM_162100125 69 +#define ARM64_HAS_LDAPR 70 #define ARM64_NCAPS 80 diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 57631fa553f6..d92ed6383f1a 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -2063,6 +2063,16 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .min_field_value = 1, .matches = has_cpuid_feature, }, + { + .desc = "RCpc load-acquire (LDAPR)", + .capability = ARM64_HAS_LDAPR, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .sys_reg = SYS_ID_AA64ISAR1_EL1, + .sign = FTR_UNSIGNED, + .field_pos = ID_AA64ISAR1_LRCPC_SHIFT, + .matches = has_cpuid_feature, + .min_field_value = 1, + }, { .desc = "TLB range maintenance instructions", .capability = ARM64_HAS_TLB_RANGE, -- 2.25.1

1 2

[PATCH 4.19 1/3] netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE
by Yongqiang Liu 17 Jul '23

17 Jul '23

From: Pablo Neira Ayuso <pablo(a)netfilter.org> mainline inclusion from mainline-v6.4-rc7 commit 1240eb93f0616b21c675416516ff3d74798fdc97 category: bugfix bugzilla: 188953 CVE: CVE-2023-3117 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In case of error when adding a new rule that refers to an anonymous set, deactivate expressions via NFT_TRANS_PREPARE state, not NFT_TRANS_RELEASE. Thus, the lookup expression marks anonymous sets as inactive in the next generation to ensure it is not reachable in this transaction anymore and decrement the set refcount as introduced by c1592a89942e ("netfilter: nf_tables: deactivate anonymous set from preparation phase"). The abort step takes care of undoing the anonymous set. This is also consistent with rule deletion, where NFT_TRANS_PREPARE is used. Note that this error path is exercised in the preparation step of the commit protocol. This patch replaces nf_tables_rule_release() by the deactivate and destroy calls, this time with NFT_TRANS_PREPARE. Due to this incorrect error handling, it is possible to access a dangling pointer to the anonymous set that remains in the transaction list. [1009.379054] BUG: KASAN: use-after-free in nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379106] Read of size 8 at addr ffff88816c4c8020 by task nft-rule-add/137110 [1009.379116] CPU: 7 PID: 137110 Comm: nft-rule-add Not tainted 6.4.0-rc4+ #256 [1009.379128] Call Trace: [1009.379132] <TASK> [1009.379135] dump_stack_lvl+0x33/0x50 [1009.379146] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379191] print_address_description.constprop.0+0x27/0x300 [1009.379201] kasan_report+0x107/0x120 [1009.379210] ? nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379255] nft_set_lookup_global+0x147/0x1a0 [nf_tables] [1009.379302] nft_lookup_init+0xa5/0x270 [nf_tables] [1009.379350] nf_tables_newrule+0x698/0xe50 [nf_tables] [1009.379397] ? nf_tables_rule_release+0xe0/0xe0 [nf_tables] [1009.379441] ? kasan_unpoison+0x23/0x50 [1009.379450] nfnetlink_rcv_batch+0x97c/0xd90 [nfnetlink] [1009.379470] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] [1009.379485] ? __alloc_skb+0xb8/0x1e0 [1009.379493] ? __alloc_skb+0xb8/0x1e0 [1009.379502] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [1009.379509] ? unwind_get_return_address+0x2a/0x40 [1009.379517] ? write_profile+0xc0/0xc0 [1009.379524] ? avc_lookup+0x8f/0xc0 [1009.379532] ? __rcu_read_unlock+0x43/0x60 Fixes: 958bee14d071 ("netfilter: nf_tables: use new transaction infrastructure to handle sets") Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> conflict: net/netfilter/nf_tables_api.c Signed-off-by: Lu Wei <luwei32(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- net/netfilter/nf_tables_api.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index f76558e03b24..0e27e489fc69 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2755,7 +2755,8 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk, return 0; err2: - nf_tables_rule_release(&ctx, rule); + nft_rule_expr_deactivate(&ctx, rule, NFT_TRANS_PREPARE); + nf_tables_rule_destroy(&ctx, rule); err1: for (i = 0; i < n; i++) { if (info[i].ops) { -- 2.25.1

1 2

[openEuler-1.0-LTS,0/3] Fix CVE-2023-3117
by Lu Wei 17 Jul '23

17 Jul '23

Pablo Neira Ayuso (3): netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: unbind non-anonymous set if rule construction fails include/net/netfilter/nf_tables.h | 1 + net/netfilter/nf_tables_api.c | 29 +++++++++++++++++++++++++---- 2 files changed, 26 insertions(+), 4 deletions(-) -- 2.31.1

1 3

[openEuler-1.0-LTS,0/3] Fix CVE-2023-3117
by Lu Wei 17 Jul '23

17 Jul '23

Pablo Neira Ayuso (3): netfilter: nf_tables: incorrect error path handling with NFT_MSG_NEWRULE netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain netfilter: nf_tables: unbind non-anonymous set if rule construction fails include/net/netfilter/nf_tables.h | 1 + net/netfilter/nf_tables_api.c | 29 +++++++++++++++++++++++++---- 2 files changed, 26 insertions(+), 4 deletions(-) -- 2.31.1

1 3

[PATCH openEuler-23.09 0/1] kconfig: Add script to check & update openeuler_defconfig
by Xie XiuQi 15 Jul '23

15 Jul '23

If new options are introduced, but openeuler_defconfig is not explicitly configured, the actual compiled version may be configured according to the default settings, which may be different from the author's expectation. Therefore, the some command is added to help developers to check and update the defconfig. It is also convenient for continuous integration tools to check the consistency of defconfig. Reference: https://gitee.com/openeuler/kernel/issues/I68D0O Reference: https://gitee.com/openeuler/kernel/issues/I63KVP Reference: https://gitee.com/openeuler/kernel/pulls/286 Reference: https://gitee.com/openeuler/kernel/commit/ca1af5899ef7c1e1617913ecee37d5397… ``` Usage: make check_oedefconfig # # New options might needs to be updated to the default configuration # file. Use the following command: # 'make openeuler_defconfig/menuconfig/update_oedefconfig/save_oedefconfig' # !!! DO NOT EDIT !!! # # defconfig: arch/arm64/configs/openeuler_defconfig # CONFIG_MEMCG=n CONFIG_BLK_CGROUP=n CONFIG_CFS_BANDWIDTH=n CONFIG_RT_GROUP_SCHED=n CONFIG_CGROUP_PIDS=n CONFIG_CGROUP_RDMA=n CONFIG_CGROUP_FREEZER=n CONFIG_CGROUP_HUGETLB=n CONFIG_CPUSETS=n make update_oedefconfig # Update openeuler_defconfig base on current source code make save_oedefconfig # Save current .config to openeuler_defconfig' ``` If someone adds a new Kconfig, he should also explicitly update openeuler_defconfig, whether it's enabled or disabled. Again, do *NOT* edit openeuler_defconfig directly. Link: https://gitee.com/openeuler/kernel/pulls/286 Xie XiuQi (1): kconfig: Add script to check & update openeuler_defconfig scripts/kconfig/Makefile | 23 +++++++++++++++++++++++ scripts/kconfig/makeconfig.sh | 24 ++++++++++++++++++++++++ 2 files changed, 47 insertions(+) create mode 100644 scripts/kconfig/makeconfig.sh -- 2.20.1

2 2

[PATCH openEuler-23.09 v1 0/8] Add NUMA-awareness to qspinlock
by Wei Li 15 Jul '23

15 Jul '23

Backport compact NUMA-aware lock feature v15 from linux maillist, and add support for arch arm64. bugzilla: https://gitee.com/openeuler/kernel/issues/I7LEG5 Reference: https://lore.kernel.org/linux-arm-kernel/20210514200743.3026725-1-alex.koga… Alex Kogan (6): locking/qspinlock: Rename mcs lock/unlock macros and make them more generic locking/qspinlock: Refactor the qspinlock slow path locking/qspinlock: Introduce CNA into the slow path of qspinlock locking/qspinlock: Introduce starvation avoidance into CNA locking/qspinlock: Avoid moving certain threads between waiting queues in CNA locking/qspinlock: Introduce the shuffle reduction optimization into CNA Wei Li (2): locking/qspinlock: Add CNA support for ARM64 locking/qspinlock: Disable CNA by default .../admin-guide/kernel-parameters.txt | 18 + arch/arm/include/asm/mcs_spinlock.h | 6 +- arch/arm64/Kconfig | 16 + arch/x86/Kconfig | 20 + arch/x86/include/asm/qspinlock.h | 4 + include/asm-generic/mcs_spinlock.h | 4 +- kernel/locking/mcs_spinlock.h | 20 +- kernel/locking/qspinlock.c | 82 +++- kernel/locking/qspinlock_cna.h | 425 ++++++++++++++++++ kernel/locking/qspinlock_paravirt.h | 2 +- mm/mempolicy.c | 4 + 11 files changed, 578 insertions(+), 23 deletions(-) create mode 100644 kernel/locking/qspinlock_cna.h -- 2.25.1

2 9

[PATCH] KVM: fix overflow of zero page refcount with ksm running
by Lei Chen 14 Jul '23

14 Jul '23

From: Zhuang Yanying <ann.zhuangyanying(a)huawei.com> mainline inclusion from mainline-v5.10 commit 7df003c85218b5f5b10a7f6418208f31e813f38f category: bugfix -------------------------------- We are testing Virtual Machine with KSM on v5.4-rc2 kernel, and found the zero_page refcount overflow. The cause of refcount overflow is increased in try_async_pf (get_user_page) without being decreased in mmu_set_spte() while handling ept violation. In kvm_release_pfn_clean(), only unreserved page will call put_page. However, zero page is reserved. So, as well as creating and destroy vm, the refcount of zero page will continue to increase until it overflows. step1: echo 10000 > /sys/kernel/pages_to_scan/pages_to_scan echo 1 > /sys/kernel/pages_to_scan/run echo 1 > /sys/kernel/pages_to_scan/use_zero_pages step2: just create several normal qemu kvm vms. And destroy it after 10s. Repeat this action all the time. After a long period of time, all domains hang because of the refcount of zero page overflow. Qemu print error log as follow: â€¦ error: kvm run failed Bad address EAX=00006cdc EBX=00000008 ECX=80202001 EDX=078bfbfd ESI=ffffffff EDI=00000000 EBP=00000008 ESP=00006cc4 EIP=000efd75 EFL=00010002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0 ES =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] CS =0008 00000000 ffffffff 00c09b00 DPL=0 CS32 [-RA] SS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] DS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] FS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] GS =0010 00000000 ffffffff 00c09300 DPL=0 DS [-WA] LDT=0000 00000000 0000ffff 00008200 DPL=0 LDT TR =0000 00000000 0000ffff 00008b00 DPL=0 TSS32-busy GDT= 000f7070 00000037 IDT= 000f70ae 00000000 CR0=00000011 CR2=00000000 CR3=00000000 CR4=00000000 DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 DR6=00000000ffff0ff0 DR7=0000000000000400 EFER=0000000000000000 Code=00 01 00 00 00 e9 e8 00 00 00 c7 05 4c 55 0f 00 01 00 00 00 <8b> 35 00 00 01 00 8b 3d 04 00 01 00 b8 d8 d3 00 00 c1 e0 08 0c ea a3 00 00 01 00 c7 05 04 â€¦ Meanwhile, a kernel warning is departed. [40914.836375] WARNING: CPU: 3 PID: 82067 at ./include/linux/mm.h:987 try_get_page+0x1f/0x30 [40914.836412] CPU: 3 PID: 82067 Comm: CPU 0/KVM Kdump: loaded Tainted: G OE 5.2.0-rc2 #5 [40914.836415] RIP: 0010:try_get_page+0x1f/0x30 [40914.836417] Code: 40 00 c3 0f 1f 84 00 00 00 00 00 48 8b 47 08 a8 01 75 11 8b 47 34 85 c0 7e 10 f0 ff 47 34 b8 01 00 00 00 c3 48 8d 78 ff eb e9 <0f> 0b 31 c0 c3 66 90 66 2e 0f 1f 84 00 0 0 00 00 00 48 8b 47 08 a8 [40914.836418] RSP: 0018:ffffb4144e523988 EFLAGS: 00010286 [40914.836419] RAX: 0000000080000000 RBX: 0000000000000326 RCX: 0000000000000000 [40914.836420] RDX: 0000000000000000 RSI: 00004ffdeba10000 RDI: ffffdf07093f6440 [40914.836421] RBP: ffffdf07093f6440 R08: 800000424fd91225 R09: 0000000000000000 [40914.836421] R10: ffff9eb41bfeebb8 R11: 0000000000000000 R12: ffffdf06bbd1e8a8 [40914.836422] R13: 0000000000000080 R14: 800000424fd91225 R15: ffffdf07093f6440 [40914.836423] FS: 00007fb60ffff700(0000) GS:ffff9eb4802c0000(0000) knlGS:0000000000000000 [40914.836425] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40914.836426] CR2: 0000000000000000 CR3: 0000002f220e6002 CR4: 00000000003626e0 [40914.836427] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [40914.836427] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [40914.836428] Call Trace: [40914.836433] follow_page_pte+0x302/0x47b [40914.836437] __get_user_pages+0xf1/0x7d0 [40914.836441] ? irq_work_queue+0x9/0x70 [40914.836443] get_user_pages_unlocked+0x13f/0x1e0 [40914.836469] __gfn_to_pfn_memslot+0x10e/0x400 [kvm] [40914.836486] try_async_pf+0x87/0x240 [kvm] [40914.836503] tdp_page_fault+0x139/0x270 [kvm] [40914.836523] kvm_mmu_page_fault+0x76/0x5e0 [kvm] [40914.836588] vcpu_enter_guest+0xb45/0x1570 [kvm] [40914.836632] kvm_arch_vcpu_ioctl_run+0x35d/0x580 [kvm] [40914.836645] kvm_vcpu_ioctl+0x26e/0x5d0 [kvm] [40914.836650] do_vfs_ioctl+0xa9/0x620 [40914.836653] ksys_ioctl+0x60/0x90 [40914.836654] __x64_sys_ioctl+0x16/0x20 [40914.836658] do_syscall_64+0x5b/0x180 [40914.836664] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [40914.836666] RIP: 0033:0x7fb61cb6bfc7 Signed-off-by: LinFeng <linfeng23(a)huawei.com> Signed-off-by: Zhuang Yanying <ann.zhuangyanying(a)huawei.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Lei Chen <lei.chen(a)smartx.com> --- virt/kvm/kvm_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c index 96fb21ac7224..e4e3dc429ec4 100644 --- a/virt/kvm/kvm_main.c +++ b/virt/kvm/kvm_main.c @@ -170,6 +170,7 @@ bool kvm_is_reserved_pfn(kvm_pfn_t pfn) */ if (pfn_valid(pfn)) return PageReserved(pfn_to_page(pfn)) && + !is_zero_pfn(pfn) && !kvm_is_zone_device_pfn(pfn); return true; -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS 0/3] nbd: fix null-ptr-dereference while accessing 'nbd->config'
by Zhong Jinghua 14 Jul '23

14 Jul '23

From: Zhong Jinghua <zhongjinghua(a)huaweicloud.com> nbd: fix null-ptr-dereference while accessing 'nbd->config' Yu Kuai (3): nbd: fold nbd config initialization into nbd_alloc_config() nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fix null-ptr-dereference while accessing 'nbd->config' drivers/block/nbd.c | 82 +++++++++++++++++++++++++++++---------------- 1 file changed, 53 insertions(+), 29 deletions(-) -- 2.31.1

2 4

[PATCH OLK-5.10] scsi: iscsi_tcp: Check that sock is valid before iscsi_set_param()
by Zhong Jinghua 14 Jul '23

14 Jul '23

mainline inclusion from mainline-v6.3-rc6 commit 48b19b79cfa37b1e50da3b5a8af529f994c08901 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7L8DZ?from=project-issue CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- The validity of sock should be checked before assignment to avoid incorrect values. Commit 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") introduced this change which may lead to inconsistent values of tcp_sw_conn->sendpage and conn->datadgst_en. Fix the issue by moving the position of the assignment. Fixes: 57569c37f0ad ("scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()") Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Link: https://lore.kernel.org/r/20230329071739.2175268-1-zhongjinghua@huaweicloud… Reviewed-by: Mike Christie <michael.christie(a)oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> --- drivers/scsi/iscsi_tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c index e8b0ac0193ee..35273434aa56 100644 --- a/drivers/scsi/iscsi_tcp.c +++ b/drivers/scsi/iscsi_tcp.c @@ -729,13 +729,12 @@ static int iscsi_sw_tcp_conn_set_param(struct iscsi_cls_conn *cls_conn, iscsi_set_param(cls_conn, param, buf, buflen); break; case ISCSI_PARAM_DATADGST_EN: - iscsi_set_param(cls_conn, param, buf, buflen); - mutex_lock(&tcp_sw_conn->sock_lock); if (!tcp_sw_conn->sock) { mutex_unlock(&tcp_sw_conn->sock_lock); return -ENOTCONN; } + iscsi_set_param(cls_conn, param, buf, buflen); tcp_sw_conn->sendpage = conn->datadgst_en ? sock_no_sendpage : tcp_sw_conn->sock->ops->sendpage; mutex_unlock(&tcp_sw_conn->sock_lock); -- 2.31.1

2 1

[PATCH OLK-5.10] nbd: Fix debugfs_create_dir error checking
by Zhong Jinghua 14 Jul '23

14 Jul '23

From: Ivan Orlov <ivan.orlov0322(a)gmail.com> stable inclusion from stable-v5.10.183 commit 01c3d3064975944a2edefef6e2f99db3244ca999 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FF4R Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ] The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huaweicloud.com> --- drivers/block/nbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index b8db56d09915..e0a21169b4b8 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1719,7 +1719,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd) return -EIO; dir = debugfs_create_dir(nbd_name(nbd), nbd_dbg_dir); - if (!dir) { + if (IS_ERR(dir)) { dev_err(nbd_to_dev(nbd), "Failed to create debugfs dir for '%s'\n", nbd_name(nbd)); return -EIO; @@ -1745,7 +1745,7 @@ static int nbd_dbg_init(void) struct dentry *dbg_dir; dbg_dir = debugfs_create_dir("nbd", NULL); - if (!dbg_dir) + if (IS_ERR(dbg_dir)) return -EIO; nbd_dbg_dir = dbg_dir; -- 2.31.1

2 1

[PATCH OLK-5.10] netfilter: nf_tables: do not ignore genmask when looking up chain by id
by Liu Jian 14 Jul '23

14 Jul '23

From: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> mainline inclusion from mainline commit 515ad530795c118f012539ed76d02bacfd426d89 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ISR3 CVE: CVE-2023-31248 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- When adding a rule to a chain referring to its ID, if that chain had been deleted on the same batch, the rule might end up referring to a deleted chain. This will lead to a WARNING like following: [ 33.098431] ------------[ cut here ]------------ [ 33.098678] WARNING: CPU: 5 PID: 69 at net/netfilter/nf_tables_api.c:2037 nf_tables_chain_destroy+0x23d/0x260 [ 33.099217] Modules linked in: [ 33.099388] CPU: 5 PID: 69 Comm: kworker/5:1 Not tainted 6.4.0+ #409 [ 33.099726] Workqueue: events nf_tables_trans_destroy_work [ 33.100018] RIP: 0010:nf_tables_chain_destroy+0x23d/0x260 [ 33.100306] Code: 8b 7c 24 68 e8 64 9c ed fe 4c 89 e7 e8 5c 9c ed fe 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 c3 cc cc cc cc <0f> 0b 48 83 c4 08 5b 41 5c 41 5d 41 5e 41 5f 5d 31 c0 89 c6 89 c7 [ 33.101271] RSP: 0018:ffffc900004ffc48 EFLAGS: 00010202 [ 33.101546] RAX: 0000000000000001 RBX: ffff888006fc0a28 RCX: 0000000000000000 [ 33.101920] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 33.102649] RBP: ffffc900004ffc78 R08: 0000000000000000 R09: 0000000000000000 [ 33.103018] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8880135ef500 [ 33.103385] R13: 0000000000000000 R14: dead000000000122 R15: ffff888006fc0a10 [ 33.103762] FS: 0000000000000000(0000) GS:ffff888024c80000(0000) knlGS:0000000000000000 [ 33.104184] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 33.104493] CR2: 00007fe863b56a50 CR3: 00000000124b0001 CR4: 0000000000770ee0 [ 33.104872] PKRU: 55555554 [ 33.104999] Call Trace: [ 33.105113] <TASK> [ 33.105214] ? show_regs+0x72/0x90 [ 33.105371] ? __warn+0xa5/0x210 [ 33.105520] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.105732] ? report_bug+0x1f2/0x200 [ 33.105902] ? handle_bug+0x46/0x90 [ 33.106546] ? exc_invalid_op+0x19/0x50 [ 33.106762] ? asm_exc_invalid_op+0x1b/0x20 [ 33.106995] ? nf_tables_chain_destroy+0x23d/0x260 [ 33.107249] ? nf_tables_chain_destroy+0x30/0x260 [ 33.107506] nf_tables_trans_destroy_work+0x669/0x680 [ 33.107782] ? mark_held_locks+0x28/0xa0 [ 33.107996] ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [ 33.108294] ? _raw_spin_unlock_irq+0x28/0x70 [ 33.108538] process_one_work+0x68c/0xb70 [ 33.108755] ? lock_acquire+0x17f/0x420 [ 33.108977] ? __pfx_process_one_work+0x10/0x10 [ 33.109218] ? do_raw_spin_lock+0x128/0x1d0 [ 33.109435] ? _raw_spin_lock_irq+0x71/0x80 [ 33.109634] worker_thread+0x2bd/0x700 [ 33.109817] ? __pfx_worker_thread+0x10/0x10 [ 33.110254] kthread+0x18b/0x1d0 [ 33.110410] ? __pfx_kthread+0x10/0x10 [ 33.110581] ret_from_fork+0x29/0x50 [ 33.110757] </TASK> [ 33.110866] irq event stamp: 1651 [ 33.111017] hardirqs last enabled at (1659): [<ffffffffa206a209>] __up_console_sem+0x79/0xa0 [ 33.111379] hardirqs last disabled at (1666): [<ffffffffa206a1ee>] __up_console_sem+0x5e/0xa0 [ 33.111740] softirqs last enabled at (1616): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112094] softirqs last disabled at (1367): [<ffffffffa1f5d40e>] __irq_exit_rcu+0x9e/0xe0 [ 33.112453] ---[ end trace 0000000000000000 ]--- This is due to the nft_chain_lookup_byid ignoring the genmask. After this change, adding the new rule will fail as it will not find the chain. Fixes: 837830a4b439 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute") Cc: stable(a)vger.kernel.org Reported-by: Mingi Cho of Theori working with ZDI Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> Reviewed-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Liu Jian <liujian56(a)huawei.com> --- net/netfilter/nf_tables_api.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 936dc1dad2c3..62049daf1351 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2278,7 +2278,7 @@ static int nf_tables_updchain(struct nft_ctx *ctx, u8 genmask, u8 policy, static struct nft_chain *nft_chain_lookup_byid(const struct net *net, const struct nft_table *table, - const struct nlattr *nla) + const struct nlattr *nla, u8 genmask) { u32 id = ntohl(nla_get_be32(nla)); struct nft_trans *trans; @@ -2288,7 +2288,8 @@ static struct nft_chain *nft_chain_lookup_byid(const struct net *net, if (trans->msg_type == NFT_MSG_NEWCHAIN && chain->table == table && - id == nft_trans_chain_id(trans)) + id == nft_trans_chain_id(trans) && + nft_active_genmask(chain, genmask)) return chain; } return ERR_PTR(-ENOENT); @@ -3197,7 +3198,8 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk, return -EOPNOTSUPP; } else if (nla[NFTA_RULE_CHAIN_ID]) { - chain = nft_chain_lookup_byid(net, table, nla[NFTA_RULE_CHAIN_ID]); + chain = nft_chain_lookup_byid(net, table, nla[NFTA_RULE_CHAIN_ID], + genmask); if (IS_ERR(chain)) { NL_SET_BAD_ATTR(extack, nla[NFTA_RULE_CHAIN_ID]); return PTR_ERR(chain); @@ -8693,7 +8695,8 @@ static int nft_verdict_init(const struct nft_ctx *ctx, struct nft_data *data, genmask); } else if (tb[NFTA_VERDICT_CHAIN_ID]) { chain = nft_chain_lookup_byid(ctx->net, ctx->table, - tb[NFTA_VERDICT_CHAIN_ID]); + tb[NFTA_VERDICT_CHAIN_ID], + genmask); if (IS_ERR(chain)) return PTR_ERR(chain); } else { -- 2.34.1

2 1

[PATCH OLK-5.10] loop: loop_set_status_from_info() check before assignment
by Zhong Jinghua 14 Jul '23

14 Jul '23

stable inclusion from stable-v5.10.173 commit c79a924ed6afac1708dfd370ba66bcf6a852ced6 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7JHOA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 9f6ad5d533d1c71e51bdd06a5712c4fbc8768dfa ] In loop_set_status_from_info(), lo->lo_offset and lo->lo_sizelimit should be checked before reassignment, because if an overflow error occurs, the original correct value will be changed to the wrong value, and it will not be changed back. More, the original patch did not solve the problem, the value was set and ioctl returned an error, but the subsequent io used the value in the loop driver, which still caused an alarm: loop_handle_cmd do_req_filebacked loff_t pos = ((loff_t) blk_rq_pos(rq) << 9) + lo->lo_offset; lo_rw_aio cmd->iocb.ki_pos = pos Fixes: c490a0b5a4f3 ("loop: Check for overflow while configuring loop") Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Link: https://lore.kernel.org/r/20230221095027.3656193-1-zhongjinghua@huaweicloud… Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> --- v2: modify bugzilla drivers/block/loop.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/block/loop.c b/drivers/block/loop.c index 60f2a31c4a24..0bb2e46cefab 100644 --- a/drivers/block/loop.c +++ b/drivers/block/loop.c @@ -1029,13 +1029,13 @@ loop_set_status_from_info(struct loop_device *lo, if (err) return err; + /* Avoid assigning overflow values */ + if (info->lo_offset > LLONG_MAX || info->lo_sizelimit > LLONG_MAX) + return -EOVERFLOW; + lo->lo_offset = info->lo_offset; lo->lo_sizelimit = info->lo_sizelimit; - /* loff_t vars have been assigned __u64 */ - if (lo->lo_offset < 0 || lo->lo_sizelimit < 0) - return -EOVERFLOW; - memcpy(lo->lo_file_name, info->lo_file_name, LO_NAME_SIZE); memcpy(lo->lo_crypt_name, info->lo_crypt_name, LO_NAME_SIZE); lo->lo_file_name[LO_NAME_SIZE-1] = 0; -- 2.31.1

2 1

[PATCH] [Backport] nbd: Fix debugfs_create_dir error checking
by Zhong Jinghua 14 Jul '23

14 Jul '23

From: Ivan Orlov <ivan.orlov0322(a)gmail.com> stable inclusion from stable-v5.10.183 commit 01c3d3064975944a2edefef6e2f99db3244ca999 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FF4R Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4913cfcf014c95f0437db2df1734472fd3e15098 ] The debugfs_create_dir function returns ERR_PTR in case of error, and the only correct way to check if an error occurred is 'IS_ERR' inline function. This patch will replace the null-comparison with IS_ERR. Signed-off-by: Ivan Orlov <ivan.orlov0322(a)gmail.com> Link: https://lore.kernel.org/r/20230512130533.98709-1-ivan.orlov0322@gmail.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- drivers/block/nbd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 8d5fde8ebb77..826c6f31dfed 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1719,7 +1719,7 @@ static int nbd_dev_dbg_init(struct nbd_device *nbd) return -EIO; dir = debugfs_create_dir(nbd_name(nbd), nbd_dbg_dir); - if (!dir) { + if (IS_ERR(dir)) { dev_err(nbd_to_dev(nbd), "Failed to create debugfs dir for '%s'\n", nbd_name(nbd)); return -EIO; @@ -1745,7 +1745,7 @@ static int nbd_dbg_init(void) struct dentry *dbg_dir; dbg_dir = debugfs_create_dir("nbd", NULL); - if (!dbg_dir) + if (IS_ERR(dbg_dir)) return -EIO; nbd_dbg_dir = dbg_dir; -- 2.31.1

1 0

[PATCH openEuler-1.0-LTS v2 0/2] Fix generic/299 fail
by Zhihao Cheng 14 Jul '23

14 Jul '23

Revert origin fix, add debug message. v1->v2: Add commit header in patch 1 Zhihao Cheng (2): Revert "ext4: Stop trying writing pages if no free blocks generated" ext4: Add debug message to notify user space is out of free fs/ext4/ext4.h | 1 - fs/ext4/extents.c | 4 +--- fs/ext4/inode.c | 16 +++++++++++++++- fs/ext4/mballoc.c | 5 ++--- 4 files changed, 18 insertions(+), 8 deletions(-) -- 2.31.1

2 3

[PATCH openEuler-22.03-LTS-SP1 0/2] Replace the hulk patch with the lts patch
by Gaosheng Cui 14 Jul '23

14 Jul '23

Replace the hulk patch with the lts patch, thanks! Gaosheng Cui (1): Revert "cgroup: Stop task iteration when rebinding subsystem" Xiu Jianfeng (1): cgroup: Do not corrupt task iteration when rebinding subsystem include/linux/cgroup.h | 1 - kernel/cgroup/cgroup.c | 50 ++++++++++++++---------------------------- 2 files changed, 16 insertions(+), 35 deletions(-) -- 2.30.0

2 3

[PATCH openEuler-1.0-LTS 0/2] Fix generic/299 fail
by Zhihao Cheng 14 Jul '23

14 Jul '23

Revert origin fix, add debug message. Zhihao Cheng (2): Revert "ext4: Stop trying writing pages if no free blocks generated" ext4: Add debug message to notify user space is out of free fs/ext4/ext4.h | 1 - fs/ext4/extents.c | 4 +--- fs/ext4/inode.c | 16 +++++++++++++++- fs/ext4/mballoc.c | 5 ++--- 4 files changed, 18 insertions(+), 8 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10 0/2] Fix generic/299 fail
by Zhihao Cheng 14 Jul '23

14 Jul '23

Revert origin fix, add debug message. Zhihao Cheng (2): Revert "ext4: Stop trying writing pages if no free blocks generated" ext4: Add debug message to notify user space is out of free fs/ext4/ext4.h | 1 - fs/ext4/extents.c | 4 +--- fs/ext4/inode.c | 16 +++++++++++++++- fs/ext4/mballoc.c | 5 ++--- 4 files changed, 18 insertions(+), 8 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10 0/2] Replace the hulk patch with the lts patch
by Gaosheng Cui 13 Jul '23

13 Jul '23

Replace the hulk patch with the lts patch, thanks! Gaosheng Cui (1): Revert "cgroup: Stop task iteration when rebinding subsystem" Xiu Jianfeng (1): cgroup: Do not corrupt task iteration when rebinding subsystem include/linux/cgroup.h | 1 - kernel/cgroup/cgroup.c | 50 ++++++++++++++---------------------------- 2 files changed, 16 insertions(+), 35 deletions(-) -- 2.30.0

2 3

[PATCH openEuler-1.0-LTS V2] bpf: cpumap: Fix memory leak in cpu_map_update_elem
by Pu Lehui 13 Jul '23

13 Jul '23

maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7KN6F CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/commit/?id=4369… ---------------------------------------- Syzkaller reported a memory leak as follows: BUG: memory leak unreferenced object 0xff110001198ef748 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00 ....J........... 00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff ........(....... backtrace: [<ffffffffadd28087>] __cpu_map_entry_alloc+0xf7/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff110001198ef528 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffadd281f0>] __cpu_map_entry_alloc+0x260/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff1100010fd93d68 (size 8): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<ffffffffade5db3e>] kvmalloc_node+0x11e/0x170 [<ffffffffadd28280>] __cpu_map_entry_alloc+0x2f0/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 In the cpu_map_update_elem flow, when kthread_stop is called before calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit of kthread has been set by kthread_stop, the threadfn of rcpu->kthread will never be executed, and rcpu->refcnt will never be 0, which will lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be released. Calling kthread_stop before executing kthread's threadfn will return -EINTR. We can complete the release of memory resources in this state. Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Acked-by: Jesper Dangaard Brouer <hawk(a)kernel.org> Acked-by: Hou Tao <houtao1(a)huawei.com> Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> --- kernel/bpf/cpumap.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c index 3c18260403dd..31faabe4cd26 100644 --- a/kernel/bpf/cpumap.c +++ b/kernel/bpf/cpumap.c @@ -143,22 +143,6 @@ static void get_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) atomic_inc(&rcpu->refcnt); } -/* called from workqueue, to workaround syscall using preempt_disable */ -static void cpu_map_kthread_stop(struct work_struct *work) -{ - struct bpf_cpu_map_entry *rcpu; - - rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); - - /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, - * as it waits until all in-flight call_rcu() callbacks complete. - */ - rcu_barrier(); - - /* kthread_stop will wake_up_process and wait for it to complete */ - kthread_stop(rcpu->kthread); -} - static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf) { @@ -240,6 +224,30 @@ static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) } } +/* called from workqueue, to workaround syscall using preempt_disable */ +static void cpu_map_kthread_stop(struct work_struct *work) +{ + struct bpf_cpu_map_entry *rcpu; + int err; + + rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); + + /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, + * as it waits until all in-flight call_rcu() callbacks complete. + */ + rcu_barrier(); + + /* kthread_stop will wake_up_process and wait for it to complete */ + err = kthread_stop(rcpu->kthread); + if (err) { + /* kthread_stop may be called before cpu_map_kthread_run + * is executed, so we need to release the memory related + * to rcpu. + */ + put_cpu_map_entry(rcpu); + } +} + static int cpu_map_kthread_run(void *data) { struct bpf_cpu_map_entry *rcpu = data; -- 2.25.1

2 1

[PATCH OLK-5.10] bpf: cpumap: Fix memory leak in cpu_map_update_elem
by Pu Lehui 12 Jul '23

12 Jul '23

maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7KNGM CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/commit/?id=4369… ---------------------------------------- Syzkaller reported a memory leak as follows: BUG: memory leak unreferenced object 0xff110001198ef748 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00 ....J........... 00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff ........(....... backtrace: [<ffffffffadd28087>] __cpu_map_entry_alloc+0xf7/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff110001198ef528 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffadd281f0>] __cpu_map_entry_alloc+0x260/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff1100010fd93d68 (size 8): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<ffffffffade5db3e>] kvmalloc_node+0x11e/0x170 [<ffffffffadd28280>] __cpu_map_entry_alloc+0x2f0/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 In the cpu_map_update_elem flow, when kthread_stop is called before calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit of kthread has been set by kthread_stop, the threadfn of rcpu->kthread will never be executed, and rcpu->refcnt will never be 0, which will lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be released. Calling kthread_stop before executing kthread's threadfn will return -EINTR. We can complete the release of memory resources in this state. Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Acked-by: Jesper Dangaard Brouer <hawk(a)kernel.org> Acked-by: Hou Tao <houtao1(a)huawei.com> Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> --- kernel/bpf/cpumap.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c index c61a23b564aa..2097ed9bd583 100644 --- a/kernel/bpf/cpumap.c +++ b/kernel/bpf/cpumap.c @@ -139,22 +139,6 @@ static void get_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) atomic_inc(&rcpu->refcnt); } -/* called from workqueue, to workaround syscall using preempt_disable */ -static void cpu_map_kthread_stop(struct work_struct *work) -{ - struct bpf_cpu_map_entry *rcpu; - - rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); - - /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, - * as it waits until all in-flight call_rcu() callbacks complete. - */ - rcu_barrier(); - - /* kthread_stop will wake_up_process and wait for it to complete */ - kthread_stop(rcpu->kthread); -} - static struct sk_buff *cpu_map_build_skb(struct xdp_frame *xdpf, struct sk_buff *skb) { @@ -225,6 +209,30 @@ static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) } } +/* called from workqueue, to workaround syscall using preempt_disable */ +static void cpu_map_kthread_stop(struct work_struct *work) +{ + struct bpf_cpu_map_entry *rcpu; + int err; + + rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); + + /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, + * as it waits until all in-flight call_rcu() callbacks complete. + */ + rcu_barrier(); + + /* kthread_stop will wake_up_process and wait for it to complete */ + err = kthread_stop(rcpu->kthread); + if (err) { + /* kthread_stop may be called before cpu_map_kthread_run + * is executed, so we need to release the memory related + * to rcpu. + */ + put_cpu_map_entry(rcpu); + } +} + static int cpu_map_bpf_prog_run_xdp(struct bpf_cpu_map_entry *rcpu, void **frames, int n, struct xdp_cpumap_stats *stats) -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] bpf: cpumap: Fix memory leak in cpu_map_update_elem
by Pu Lehui 12 Jul '23

12 Jul '23

maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7KN6F CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git/commit/?id=4369… ---------------------------------------- Syzkaller reported a memory leak as follows: BUG: memory leak unreferenced object 0xff110001198ef748 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 4a 19 00 00 80 ad e3 e4 fe ff c0 00 ....J........... 00 b2 d3 0c 01 00 11 ff 28 f5 8e 19 01 00 11 ff ........(....... backtrace: [<ffffffffadd28087>] __cpu_map_entry_alloc+0xf7/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff110001198ef528 (size 192): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffadd281f0>] __cpu_map_entry_alloc+0x260/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 BUG: memory leak unreferenced object 0xff1100010fd93d68 (size 8): comm "syz-executor.3", pid 17672, jiffies 4298118891 (age 9.906s) hex dump (first 8 bytes): 00 00 00 00 00 00 00 00 ........ backtrace: [<ffffffffade5db3e>] kvmalloc_node+0x11e/0x170 [<ffffffffadd28280>] __cpu_map_entry_alloc+0x2f0/0xb00 [<ffffffffadd28d8e>] cpu_map_update_elem+0x2fe/0x3d0 [<ffffffffadc6d0fd>] bpf_map_update_value.isra.0+0x2bd/0x520 [<ffffffffadc7349b>] map_update_elem+0x4cb/0x720 [<ffffffffadc7d983>] __se_sys_bpf+0x8c3/0xb90 [<ffffffffb029cc80>] do_syscall_64+0x30/0x40 [<ffffffffb0400099>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 In the cpu_map_update_elem flow, when kthread_stop is called before calling the threadfn of rcpu->kthread, since the KTHREAD_SHOULD_STOP bit of kthread has been set by kthread_stop, the threadfn of rcpu->kthread will never be executed, and rcpu->refcnt will never be 0, which will lead to the allocated rcpu, rcpu->queue and rcpu->queue->queue cannot be released. Calling kthread_stop before executing kthread's threadfn will return -EINTR. We can complete the release of memory resources in this state. Fixes: 6710e1126934 ("bpf: introduce new bpf cpu map type BPF_MAP_TYPE_CPUMAP") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Acked-by: Jesper Dangaard Brouer <hawk(a)kernel.org> Acked-by: Hou Tao <houtao1(a)huawei.com> Link: https://lore.kernel.org/r/20230711115848.2701559-1-pulehui@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> --- kernel/bpf/cpumap.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/kernel/bpf/cpumap.c b/kernel/bpf/cpumap.c index 3c18260403dd..31faabe4cd26 100644 --- a/kernel/bpf/cpumap.c +++ b/kernel/bpf/cpumap.c @@ -143,22 +143,6 @@ static void get_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) atomic_inc(&rcpu->refcnt); } -/* called from workqueue, to workaround syscall using preempt_disable */ -static void cpu_map_kthread_stop(struct work_struct *work) -{ - struct bpf_cpu_map_entry *rcpu; - - rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); - - /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, - * as it waits until all in-flight call_rcu() callbacks complete. - */ - rcu_barrier(); - - /* kthread_stop will wake_up_process and wait for it to complete */ - kthread_stop(rcpu->kthread); -} - static struct sk_buff *cpu_map_build_skb(struct bpf_cpu_map_entry *rcpu, struct xdp_frame *xdpf) { @@ -240,6 +224,30 @@ static void put_cpu_map_entry(struct bpf_cpu_map_entry *rcpu) } } +/* called from workqueue, to workaround syscall using preempt_disable */ +static void cpu_map_kthread_stop(struct work_struct *work) +{ + struct bpf_cpu_map_entry *rcpu; + int err; + + rcpu = container_of(work, struct bpf_cpu_map_entry, kthread_stop_wq); + + /* Wait for flush in __cpu_map_entry_free(), via full RCU barrier, + * as it waits until all in-flight call_rcu() callbacks complete. + */ + rcu_barrier(); + + /* kthread_stop will wake_up_process and wait for it to complete */ + err = kthread_stop(rcpu->kthread); + if (err) { + /* kthread_stop may be called before cpu_map_kthread_run + * is executed, so we need to release the memory related + * to rcpu. + */ + put_cpu_map_entry(rcpu); + } +} + static int cpu_map_kthread_run(void *data) { struct bpf_cpu_map_entry *rcpu = data; -- 2.25.1

2 1

openEuler Kernel SIG 双周例会
by openEuler conference 12 Jul '23

12 Jul '23

您好！ Kernel SIG 邀请您参加 2023-07-14 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG 双周例会会议内容： 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可能直接回复邮件，或录入会议看板）会议链接：https://us06web.zoom.us/j/84401590636?pwd=MitsdU9RcFYyYnJHWDRSdmRWQzd3UT09 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-07-14 14:00, The subject of the conference is openEuler Kernel SIG 双周例会, Summary: 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可能直接回复邮件，或录入会议看板） You can join the meeting at https://us06web.zoom.us/j/84401590636?pwd=MitsdU9RcFYyYnJHWDRSdmRWQzd3UT09. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH OLK-5.10] jbd2: Check 'jh->b_transaction' before remove it from checkpoint
by Zhihao Cheng 11 Jul '23

11 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I70WHL CVE: NA -------------------------------- Following process will corrupt ext4 image: Step 1: jbd2_journal_commit_transaction __jbd2_journal_insert_checkpoint(jh, commit_transaction) // Put jh into trans1->t_checkpoint_list journal->j_checkpoint_transactions = commit_transaction // Put trans1 into journal->j_checkpoint_transactions Step 2: do_get_write_access test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty __jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2 Step 3: drop_cache journal_shrink_one_cp_list jbd2_journal_try_remove_checkpoint if (!trylock_buffer(bh)) // lock bh, true if (buffer_dirty(bh)) // buffer is not dirty __jbd2_journal_remove_checkpoint(jh) // remove jh from trans1->t_checkpoint_list Step 4: jbd2_log_do_checkpoint trans1 = journal->j_checkpoint_transactions // jh is not in trans1->t_checkpoint_list jbd2_cleanup_journal_tail(journal) // trans1 is done Step 5: Power cut, trans2 is not committed, jh is lost in next mounting. Fix it by checking 'jh->b_transaction' before remove it from checkpoint. Fixes: 80079353757dc ("jbd2: fix a race when checking checkpoint ...") Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/jbd2/checkpoint.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/jbd2/checkpoint.c b/fs/jbd2/checkpoint.c index a87a39f028b9..b7e1a2bdd7fb 100644 --- a/fs/jbd2/checkpoint.c +++ b/fs/jbd2/checkpoint.c @@ -639,6 +639,8 @@ int jbd2_journal_try_remove_checkpoint(struct journal_head *jh) { struct buffer_head *bh = jh2bh(jh); + if (jh->b_transaction) + return -EBUSY; if (!trylock_buffer(bh)) return -EBUSY; if (buffer_dirty(bh)) { -- 2.31.1

2 1

[PATCH openEuler-23.09 v1] checkpatch: Update check of link tags
by Wei Li 11 Jul '23

11 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7KBJI -------------------------------- Custom 'bugzilla' and 'Reference' tags can also be URL, update the check of link tags. Signed-off-by: Wei Li <liwei391(a)huawei.com> --- scripts/checkpatch.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index b30114d637c4..7395b4c69a67 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -620,7 +620,7 @@ our $signature_tags = qr{(?xi: Cc: )}; -our @link_tags = qw(Link Closes); +our @link_tags = qw(Link Closes bugzilla Reference); #Create a search and print patterns for all these strings to be used directly below our $link_tags_search = ""; -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] etmem: fix the div 0 problem in swapcache reclaim process
by liubo 11 Jul '23

11 Jul '23

euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7JI6K CVE: NA ------------------------------------------------------------ In the swapcache recycling process, the number of pages to be reclaimed on each node is obtained as follows: nr_to_reclaim[nid_num] = (swapcache_to_reclaim / (swapcache_total_reclaimable / nr[nid_num])); However, nr[nid_num] is obtained by traversing the number of swapcache pages on each node. If there are multiple nodes in the environment and no swap process occurs on a node, no swapcache page exists. The value of nr[nid_num] may be 0. Therefore, division by zero errors may occur. Signed-off-by: liubo <liubo254(a)huawei.com> --- mm/vmscan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index f5671facdc51..00ed94bfea78 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4819,9 +4819,12 @@ int do_swapcache_reclaim(unsigned long *swapcache_watermark, for_each_node_state(nid, N_MEMORY) { cond_resched(); - nr_to_reclaim[nid_num] = (swapcache_to_reclaim / (swapcache_total_reclaimable / nr[nid_num])); + nr_to_reclaim[nid_num] = (swapcache_total_reclaimable == 0) ? 0 : + ((swapcache_to_reclaim * nr[nid_num]) / + swapcache_total_reclaimable); reclaim_page_count += reclaim_swapcache_pages_from_list(nid, - &swapcache_list[nid_num], nr_to_reclaim[nid_num], false); + &swapcache_list[nid_num], + nr_to_reclaim[nid_num], false); nid_num++; } -- 2.27.0

2 1

[PATCH openEuler-1.0-LTS 1/3] file: Rename __close_fd_get_file close_fd_get_file
by Yongqiang Liu 10 Jul '23

10 Jul '23

From: "Eric W. Biederman" <ebiederm(a)xmission.com> mainline inclusion from mainline-v5.11-rc1 commit 9fe83c43e71cdb8e5b9520bcb98706a2b3c680c8 category: bugfix bugzilla: 188963, https://gitee.com/src-openeuler/kernel/issues/I7GUAN CVE: NA -------------------------------- The function close_fd_get_file is explicitly a variant of __close_fd[1]. Now that __close_fd has been renamed close_fd, rename close_fd_get_file to be consistent with close_fd. When __alloc_fd, __close_fd and __fd_install were introduced the double underscore indicated that the function took a struct files_struct parameter. The function __close_fd_get_file never has so the naming has always been inconsistent. This just cleans things up so there are not any lingering mentions or references __close_fd left in the code. [1] 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()") Link: https://lkml.kernel.org/r/20201120231441.29911-23-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm(a)xmission.com> Conflicts: drivers/android/binder.c fs/file.c fs/io_uring.c include/linux/fdtable.h Signed-off-by: Li Nan <linan122(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/android/binder.c | 2 +- fs/file.c | 4 ++-- fs/io_uring.c | 2 +- include/linux/fdtable.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 720ee4b97879..d73b0df55967 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2290,7 +2290,7 @@ static void binder_deferred_fd_close(int fd) if (!twcb) return; init_task_work(&twcb->twork, binder_do_fd_close); - __close_fd_get_file(fd, &twcb->file); + close_fd_get_file(fd, &twcb->file); if (twcb->file) { filp_close(twcb->file, current->files); task_work_add(current, &twcb->twork, true); diff --git a/fs/file.c b/fs/file.c index eb10b7634d76..7ada34a76742 100644 --- a/fs/file.c +++ b/fs/file.c @@ -696,11 +696,11 @@ int __close_fd(struct files_struct *files, unsigned fd) EXPORT_SYMBOL(__close_fd); /* for ksys_close() */ /* - * variant of __close_fd that gets a ref on the file for later fput. + * variant of close_fd that gets a ref on the file for later fput. * The caller must ensure that filp_close() called on the file, and then * an fput(). */ -int __close_fd_get_file(unsigned int fd, struct file **res) +int close_fd_get_file(unsigned int fd, struct file **res) { struct files_struct *files = current->files; struct file *file; diff --git a/fs/io_uring.c b/fs/io_uring.c index 7d7af6a0ef96..8d6c0c46e5a0 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3885,7 +3885,7 @@ static int io_close(struct io_kiocb *req, bool force_nonblock, /* might be already done during nonblock submission */ if (!close->put_file) { - ret = __close_fd_get_file(close->fd, &close->put_file); + ret = close_fd_get_file(close->fd, &close->put_file); if (ret < 0) return (ret == -ENOENT) ? -EBADF : ret; } diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 29044f3390d3..05849a82b330 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -122,7 +122,7 @@ extern void __fd_install(struct files_struct *files, unsigned int fd, struct file *file); extern int __close_fd(struct files_struct *files, unsigned int fd); -extern int __close_fd_get_file(unsigned int fd, struct file **res); +extern int close_fd_get_file(unsigned int fd, struct file **res); extern struct kmem_cache *files_cachep; -- 2.25.1

1 2

[PATCH 4.19 1/3] file: Rename __close_fd_get_file close_fd_get_file
by Yongqiang Liu 10 Jul '23

10 Jul '23

From: "Eric W. Biederman" <ebiederm(a)xmission.com> mainline inclusion from mainline-v5.11-rc1 commit 9fe83c43e71cdb8e5b9520bcb98706a2b3c680c8 category: bugfix bugzilla: 188963, https://gitee.com/src-openeuler/kernel/issues/I7GUAN CVE: NA -------------------------------- The function close_fd_get_file is explicitly a variant of __close_fd[1]. Now that __close_fd has been renamed close_fd, rename close_fd_get_file to be consistent with close_fd. When __alloc_fd, __close_fd and __fd_install were introduced the double underscore indicated that the function took a struct files_struct parameter. The function __close_fd_get_file never has so the naming has always been inconsistent. This just cleans things up so there are not any lingering mentions or references __close_fd left in the code. [1] 80cd795630d6 ("binder: fix use-after-free due to ksys_close() during fdget()") Link: https://lkml.kernel.org/r/20201120231441.29911-23-ebiederm@xmission.com Signed-off-by: Eric W. Biederman <ebiederm(a)xmission.com> Conflicts: drivers/android/binder.c fs/file.c fs/io_uring.c include/linux/fdtable.h Signed-off-by: Li Nan <linan122(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/android/binder.c | 2 +- fs/file.c | 4 ++-- fs/io_uring.c | 2 +- include/linux/fdtable.h | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 720ee4b97879..d73b0df55967 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2290,7 +2290,7 @@ static void binder_deferred_fd_close(int fd) if (!twcb) return; init_task_work(&twcb->twork, binder_do_fd_close); - __close_fd_get_file(fd, &twcb->file); + close_fd_get_file(fd, &twcb->file); if (twcb->file) { filp_close(twcb->file, current->files); task_work_add(current, &twcb->twork, true); diff --git a/fs/file.c b/fs/file.c index eb10b7634d76..7ada34a76742 100644 --- a/fs/file.c +++ b/fs/file.c @@ -696,11 +696,11 @@ int __close_fd(struct files_struct *files, unsigned fd) EXPORT_SYMBOL(__close_fd); /* for ksys_close() */ /* - * variant of __close_fd that gets a ref on the file for later fput. + * variant of close_fd that gets a ref on the file for later fput. * The caller must ensure that filp_close() called on the file, and then * an fput(). */ -int __close_fd_get_file(unsigned int fd, struct file **res) +int close_fd_get_file(unsigned int fd, struct file **res) { struct files_struct *files = current->files; struct file *file; diff --git a/fs/io_uring.c b/fs/io_uring.c index 7d7af6a0ef96..8d6c0c46e5a0 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -3885,7 +3885,7 @@ static int io_close(struct io_kiocb *req, bool force_nonblock, /* might be already done during nonblock submission */ if (!close->put_file) { - ret = __close_fd_get_file(close->fd, &close->put_file); + ret = close_fd_get_file(close->fd, &close->put_file); if (ret < 0) return (ret == -ENOENT) ? -EBADF : ret; } diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h index 29044f3390d3..05849a82b330 100644 --- a/include/linux/fdtable.h +++ b/include/linux/fdtable.h @@ -122,7 +122,7 @@ extern void __fd_install(struct files_struct *files, unsigned int fd, struct file *file); extern int __close_fd(struct files_struct *files, unsigned int fd); -extern int __close_fd_get_file(unsigned int fd, struct file **res); +extern int close_fd_get_file(unsigned int fd, struct file **res); extern struct kmem_cache *files_cachep; -- 2.25.1

1 0

[PATCH openEuler-23.09 v2 0/2] Add initial openeuler_defconfig
by Wei Li 10 Jul '23

10 Jul '23

Add initial openeuler_defconfig of arm64 and x86_64, inheritted from openEuler-22.03-LTS-SP2. Wei Li (2): config: arm64: Add initial openeuler_defconfig config: x86_64: Add initial openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 7815 ++++++++++++++++++++ arch/x86/configs/openeuler_defconfig | 9053 ++++++++++++++++++++++++ 2 files changed, 16868 insertions(+) create mode 100644 arch/arm64/configs/openeuler_defconfig create mode 100644 arch/x86/configs/openeuler_defconfig -- 2.25.1

1 2

[PATCH OLK-5.10] Remove DECnet support from kernel
by Dong Chenchen 10 Jul '23

10 Jul '23

From: Stephen Hemminger <stephen(a)networkplumber.org> stable inclusion from stable-v5.10.184 commit 1c004b379b0327992c1713334198cf5eba29a4ba category: bugfix bugzilla: 188948 CVE: CVE-2023-3338 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… --------------------------- commit 1202cdd665315c525b5237e96e0bedc76d7e754f upstream. DECnet is an obsolete network protocol that receives more attention from kernel janitors than users. It belongs in computer protocol history museum not in Linux kernel. It has been "Orphaned" in kernel since 2010. The iproute2 support for DECnet was dropped in 5.0 release. The documentation link on Sourceforge says it is abandoned there as well. Leave the UAPI alone to keep userspace programs compiling. This means that there is still an empty neighbour table for AF_DECNET. The table of /proc/sys/net entries was updated to match current directories and reformatted to be alphabetical. Signed-off-by: Stephen Hemminger <stephen(a)networkplumber.org> Acked-by: David Ahern <dsahern(a)kernel.org> Acked-by: Nikolay Aleksandrov <razor(a)blackwall.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- .../admin-guide/kernel-parameters.txt | 4 - Documentation/admin-guide/sysctl/net.rst | 15 +- Documentation/networking/decnet.rst | 243 -- Documentation/networking/index.rst | 1 - .../userspace-api/ioctl/ioctl-number.rst | 1 - MAINTAINERS | 7 - arch/mips/configs/decstation_64_defconfig | 2 - arch/mips/configs/decstation_defconfig | 2 - arch/mips/configs/decstation_r4k_defconfig | 2 - arch/mips/configs/gpr_defconfig | 2 - arch/mips/configs/mtx1_defconfig | 2 - arch/mips/configs/nlm_xlp_defconfig | 2 - arch/mips/configs/nlm_xlr_defconfig | 2 - arch/mips/configs/rm200_defconfig | 2 - arch/powerpc/configs/ppc6xx_defconfig | 2 - include/linux/netdevice.h | 4 - include/linux/netfilter.h | 5 - include/linux/netfilter_defs.h | 8 - include/net/dn.h | 231 -- include/net/dn_dev.h | 199 -- include/net/dn_fib.h | 167 -- include/net/dn_neigh.h | 30 - include/net/dn_nsp.h | 195 -- include/net/dn_route.h | 115 - include/net/netns/netfilter.h | 3 - include/uapi/linux/dn.h | 149 - include/uapi/linux/netfilter_decnet.h | 72 - include/uapi/linux/netlink.h | 2 +- net/Kconfig | 2 - net/Makefile | 1 - net/core/dev.c | 4 +- net/core/neighbour.c | 3 - net/decnet/Kconfig | 43 - net/decnet/Makefile | 10 - net/decnet/README | 8 - net/decnet/af_decnet.c | 2400 ----------------- net/decnet/dn_dev.c | 1435 ---------- net/decnet/dn_fib.c | 799 ------ net/decnet/dn_neigh.c | 605 ----- net/decnet/dn_nsp_in.c | 906 ------- net/decnet/dn_nsp_out.c | 695 ----- net/decnet/dn_route.c | 1923 ------------- net/decnet/dn_rules.c | 258 -- net/decnet/dn_table.c | 929 ------- net/decnet/dn_timer.c | 104 - net/decnet/netfilter/Kconfig | 17 - net/decnet/netfilter/Makefile | 6 - net/decnet/netfilter/dn_rtmsg.c | 158 -- net/decnet/sysctl_net_decnet.c | 362 --- net/netfilter/core.c | 10 - 50 files changed, 10 insertions(+), 12137 deletions(-) delete mode 100644 Documentation/networking/decnet.rst delete mode 100644 include/net/dn.h delete mode 100644 include/net/dn_dev.h delete mode 100644 include/net/dn_fib.h delete mode 100644 include/net/dn_neigh.h delete mode 100644 include/net/dn_nsp.h delete mode 100644 include/net/dn_route.h delete mode 100644 include/uapi/linux/dn.h delete mode 100644 include/uapi/linux/netfilter_decnet.h delete mode 100644 net/decnet/Kconfig delete mode 100644 net/decnet/Makefile delete mode 100644 net/decnet/README delete mode 100644 net/decnet/af_decnet.c delete mode 100644 net/decnet/dn_dev.c delete mode 100644 net/decnet/dn_fib.c delete mode 100644 net/decnet/dn_neigh.c delete mode 100644 net/decnet/dn_nsp_in.c delete mode 100644 net/decnet/dn_nsp_out.c delete mode 100644 net/decnet/dn_route.c delete mode 100644 net/decnet/dn_rules.c delete mode 100644 net/decnet/dn_table.c delete mode 100644 net/decnet/dn_timer.c delete mode 100644 net/decnet/netfilter/Kconfig delete mode 100644 net/decnet/netfilter/Makefile delete mode 100644 net/decnet/netfilter/dn_rtmsg.c delete mode 100644 net/decnet/sysctl_net_decnet.c diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 786bb3f02c61..2addbf715cc0 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -892,10 +892,6 @@ debugpat [X86] Enable PAT debugging - decnet.addr= [HW,NET] - Format: <area>[,<node>] - See also Documentation/networking/decnet.rst. - default_hugepagesz= [HW] The size of the default HugeTLB page. This is the size represented by the legacy /proc/ hugepages diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst index 7f553859dba8..4f1a686b4b64 100644 --- a/Documentation/admin-guide/sysctl/net.rst +++ b/Documentation/admin-guide/sysctl/net.rst @@ -34,13 +34,14 @@ Table : Subdirectories in /proc/sys/net ========= =================== = ========== ================== Directory Content Directory Content ========= =================== = ========== ================== - core General parameter appletalk Appletalk protocol - unix Unix domain sockets netrom NET/ROM - 802 E802 protocol ax25 AX25 - ethernet Ethernet protocol rose X.25 PLP layer - ipv4 IP version 4 x25 X.25 protocol - bridge Bridging decnet DEC net - ipv6 IP version 6 tipc TIPC + 802 E802 protocol mptcp Multipath TCP + appletalk Appletalk protocol netfilter Network Filter + ax25 AX25 netrom NET/ROM + bridge Bridging rose X.25 PLP layer + core General parameter tipc TIPC + ethernet Ethernet protocol unix Unix domain sockets + ipv4 IP version 4 x25 X.25 protocol + ipv6 IP version 6 ========= =================== = ========== ================== 1. /proc/sys/net/core - Network core options diff --git a/Documentation/networking/decnet.rst b/Documentation/networking/decnet.rst deleted file mode 100644 index b8bc11ff8370..000000000000 --- a/Documentation/networking/decnet.rst +++ /dev/null @@ -1,243 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -========================================= -Linux DECnet Networking Layer Information -========================================= - -1. Other documentation.... -========================== - - - Project Home Pages - - http://www.chygwyn.com/ - Kernel info - - http://linux-decnet.sourceforge.net/ - Userland tools - - http://www.sourceforge.net/projects/linux-decnet/ - Status page - -2. Configuring the kernel -========================= - -Be sure to turn on the following options: - - - CONFIG_DECNET (obviously) - - CONFIG_PROC_FS (to see what's going on) - - CONFIG_SYSCTL (for easy configuration) - -if you want to try out router support (not properly debugged yet) -you'll need the following options as well... - - - CONFIG_DECNET_ROUTER (to be able to add/delete routes) - - CONFIG_NETFILTER (will be required for the DECnet routing daemon) - -Don't turn on SIOCGIFCONF support for DECnet unless you are really sure -that you need it, in general you won't and it can cause ifconfig to -malfunction. - -Run time configuration has changed slightly from the 2.4 system. If you -want to configure an endnode, then the simplified procedure is as follows: - - - Set the MAC address on your ethernet card before starting _any_ other - network protocols. - -As soon as your network card is brought into the UP state, DECnet should -start working. If you need something more complicated or are unsure how -to set the MAC address, see the next section. Also all configurations which -worked with 2.4 will work under 2.5 with no change. - -3. Command line options -======================= - -You can set a DECnet address on the kernel command line for compatibility -with the 2.4 configuration procedure, but in general it's not needed any more. -If you do st a DECnet address on the command line, it has only one purpose -which is that its added to the addresses on the loopback device. - -With 2.4 kernels, DECnet would only recognise addresses as local if they -were added to the loopback device. In 2.5, any local interface address -can be used to loop back to the local machine. Of course this does not -prevent you adding further addresses to the loopback device if you -want to. - -N.B. Since the address list of an interface determines the addresses for -which "hello" messages are sent, if you don't set an address on the loopback -interface then you won't see any entries in /proc/net/neigh for the local -host until such time as you start a connection. This doesn't affect the -operation of the local communications in any other way though. - -The kernel command line takes options looking like the following:: - - decnet.addr=1,2 - -the two numbers are the node address 1,2 = 1.2 For 2.2.xx kernels -and early 2.3.xx kernels, you must use a comma when specifying the -DECnet address like this. For more recent 2.3.xx kernels, you may -use almost any character except space, although a `.` would be the most -obvious choice :-) - -There used to be a third number specifying the node type. This option -has gone away in favour of a per interface node type. This is now set -using /proc/sys/net/decnet/conf/<dev>/forwarding. This file can be -set with a single digit, 0=EndNode, 1=L1 Router and 2=L2 Router. - -There are also equivalent options for modules. The node address can -also be set through the /proc/sys/net/decnet/ files, as can other system -parameters. - -Currently the only supported devices are ethernet and ip_gre. The -ethernet address of your ethernet card has to be set according to the DECnet -address of the node in order for it to be autoconfigured (and then appear in -/proc/net/decnet_dev). There is a utility available at the above -FTP sites called dn2ethaddr which can compute the correct ethernet -address to use. The address can be set by ifconfig either before or -at the time the device is brought up. If you are using RedHat you can -add the line:: - - MACADDR=AA:00:04:00:03:04 - -or something similar, to /etc/sysconfig/network-scripts/ifcfg-eth0 or -wherever your network card's configuration lives. Setting the MAC address -of your ethernet card to an address starting with "hi-ord" will cause a -DECnet address which matches to be added to the interface (which you can -verify with iproute2). - -The default device for routing can be set through the /proc filesystem -by setting /proc/sys/net/decnet/default_device to the -device you want DECnet to route packets out of when no specific route -is available. Usually this will be eth0, for example:: - - echo -n "eth0" >/proc/sys/net/decnet/default_device - -If you don't set the default device, then it will default to the first -ethernet card which has been autoconfigured as described above. You can -confirm that by looking in the default_device file of course. - -There is a list of what the other files under /proc/sys/net/decnet/ do -on the kernel patch web site (shown above). - -4. Run time kernel configuration -================================ - - -This is either done through the sysctl/proc interface (see the kernel web -pages for details on what the various options do) or through the iproute2 -package in the same way as IPv4/6 configuration is performed. - -Documentation for iproute2 is included with the package, although there is -as yet no specific section on DECnet, most of the features apply to both -IP and DECnet, albeit with DECnet addresses instead of IP addresses and -a reduced functionality. - -If you want to configure a DECnet router you'll need the iproute2 package -since its the _only_ way to add and delete routes currently. Eventually -there will be a routing daemon to send and receive routing messages for -each interface and update the kernel routing tables accordingly. The -routing daemon will use netfilter to listen to routing packets, and -rtnetlink to update the kernels routing tables. - -The DECnet raw socket layer has been removed since it was there purely -for use by the routing daemon which will now use netfilter (a much cleaner -and more generic solution) instead. - -5. How can I tell if its working? -================================= - -Here is a quick guide of what to look for in order to know if your DECnet -kernel subsystem is working. - - - Is the node address set (see /proc/sys/net/decnet/node_address) - - Is the node of the correct type - (see /proc/sys/net/decnet/conf/<dev>/forwarding) - - Is the Ethernet MAC address of each Ethernet card set to match - the DECnet address. If in doubt use the dn2ethaddr utility available - at the ftp archive. - - If the previous two steps are satisfied, and the Ethernet card is up, - you should find that it is listed in /proc/net/decnet_dev and also - that it appears as a directory in /proc/sys/net/decnet/conf/. The - loopback device (lo) should also appear and is required to communicate - within a node. - - If you have any DECnet routers on your network, they should appear - in /proc/net/decnet_neigh, otherwise this file will only contain the - entry for the node itself (if it doesn't check to see if lo is up). - - If you want to send to any node which is not listed in the - /proc/net/decnet_neigh file, you'll need to set the default device - to point to an Ethernet card with connection to a router. This is - again done with the /proc/sys/net/decnet/default_device file. - - Try starting a simple server and client, like the dnping/dnmirror - over the loopback interface. With luck they should communicate. - For this step and those after, you'll need the DECnet library - which can be obtained from the above ftp sites as well as the - actual utilities themselves. - - If this seems to work, then try talking to a node on your local - network, and see if you can obtain the same results. - - At this point you are on your own... :-) - -6. How to send a bug report -=========================== - -If you've found a bug and want to report it, then there are several things -you can do to help me work out exactly what it is that is wrong. Useful -information (_most_ of which _is_ _essential_) includes: - - - What kernel version are you running ? - - What version of the patch are you running ? - - How far though the above set of tests can you get ? - - What is in the /proc/decnet* files and /proc/sys/net/decnet/* files ? - - Which services are you running ? - - Which client caused the problem ? - - How much data was being transferred ? - - Was the network congested ? - - How can the problem be reproduced ? - - Can you use tcpdump to get a trace ? (N.B. Most (all?) versions of - tcpdump don't understand how to dump DECnet properly, so including - the hex listing of the packet contents is _essential_, usually the -x flag. - You may also need to increase the length grabbed with the -s flag. The - -e flag also provides very useful information (ethernet MAC addresses)) - -7. MAC FAQ -========== - -A quick FAQ on ethernet MAC addresses to explain how Linux and DECnet -interact and how to get the best performance from your hardware. - -Ethernet cards are designed to normally only pass received network frames -to a host computer when they are addressed to it, or to the broadcast address. - -Linux has an interface which allows the setting of extra addresses for -an ethernet card to listen to. If the ethernet card supports it, the -filtering operation will be done in hardware, if not the extra unwanted packets -received will be discarded by the host computer. In the latter case, -significant processor time and bus bandwidth can be used up on a busy -network (see the NAPI documentation for a longer explanation of these -effects). - -DECnet makes use of this interface to allow running DECnet on an ethernet -card which has already been configured using TCP/IP (presumably using the -built in MAC address of the card, as usual) and/or to allow multiple DECnet -addresses on each physical interface. If you do this, be aware that if your -ethernet card doesn't support perfect hashing in its MAC address filter -then your computer will be doing more work than required. Some cards -will simply set themselves into promiscuous mode in order to receive -packets from the DECnet specified addresses. So if you have one of these -cards its better to set the MAC address of the card as described above -to gain the best efficiency. Better still is to use a card which supports -NAPI as well. - - -8. Mailing list -=============== - -If you are keen to get involved in development, or want to ask questions -about configuration, or even just report bugs, then there is a mailing -list that you can join, details are at: - -http://sourceforge.net/mail/?group_id=4993 - -9. Legal Info -============= - -The Linux DECnet project team have placed their code under the GPL. The -software is provided "as is" and without warranty express or implied. -DECnet is a trademark of Compaq. This software is not a product of -Compaq. We acknowledge the help of people at Compaq in providing extra -documentation above and beyond what was previously publicly available. - -Steve Whitehouse <SteveW(a)ACM.org> - diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst index 63ef386afd0a..9fab919ed530 100644 --- a/Documentation/networking/index.rst +++ b/Documentation/networking/index.rst @@ -46,7 +46,6 @@ Contents: cdc_mbim dccp dctcp - decnet dns_resolver driver eql diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst index da39c1b35bf5..0f49667e55f7 100644 --- a/Documentation/userspace-api/ioctl/ioctl-number.rst +++ b/Documentation/userspace-api/ioctl/ioctl-number.rst @@ -303,7 +303,6 @@ Code Seq# Include File Comments 0x89 00-06 arch/x86/include/asm/sockios.h 0x89 0B-DF linux/sockios.h 0x89 E0-EF linux/sockios.h SIOCPROTOPRIVATE range -0x89 E0-EF linux/dn.h PROTOPRIVATE range 0x89 F0-FF linux/sockios.h SIOCDEVPRIVATE range 0x8B all linux/wireless.h 0x8C 00-3F WiNRADiO driver diff --git a/MAINTAINERS b/MAINTAINERS index 34e5b245fc07..f1d7591308f2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4927,13 +4927,6 @@ F: include/linux/tfrc.h F: include/uapi/linux/dccp.h F: net/dccp/ -DECnet NETWORK LAYER -L: linux-decnet-user(a)lists.sourceforge.net -S: Orphan -W: http://linux-decnet.sourceforge.net -F: Documentation/networking/decnet.rst -F: net/decnet/ - DECSTATION PLATFORM SUPPORT M: "Maciej W. Rozycki" <macro(a)linux-mips.org> L: linux-mips(a)vger.kernel.org diff --git a/arch/mips/configs/decstation_64_defconfig b/arch/mips/configs/decstation_64_defconfig index 85f1955b4b00..4a81297e21a7 100644 --- a/arch/mips/configs/decstation_64_defconfig +++ b/arch/mips/configs/decstation_64_defconfig @@ -53,8 +53,6 @@ CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig index 30a6eafdb1d0..fd35454bae4c 100644 --- a/arch/mips/configs/decstation_defconfig +++ b/arch/mips/configs/decstation_defconfig @@ -49,8 +49,6 @@ CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set diff --git a/arch/mips/configs/decstation_r4k_defconfig b/arch/mips/configs/decstation_r4k_defconfig index e2b58dbf4aa9..7ed8f4c7cbdd 100644 --- a/arch/mips/configs/decstation_r4k_defconfig +++ b/arch/mips/configs/decstation_r4k_defconfig @@ -48,8 +48,6 @@ CONFIG_IPV6_SUBTREES=y CONFIG_NETWORK_SECMARK=y CONFIG_IP_SCTP=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y # CONFIG_WIRELESS is not set # CONFIG_UEVENT_HELPER is not set # CONFIG_FW_LOADER is not set diff --git a/arch/mips/configs/gpr_defconfig b/arch/mips/configs/gpr_defconfig index 9085f4d6c698..5b9b59a8fe68 100644 --- a/arch/mips/configs/gpr_defconfig +++ b/arch/mips/configs/gpr_defconfig @@ -69,7 +69,6 @@ CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -99,7 +98,6 @@ CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index 914af125a7fa..d6578536d77c 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -117,7 +117,6 @@ CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -147,7 +146,6 @@ CONFIG_ATM_MPOA=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m diff --git a/arch/mips/configs/nlm_xlp_defconfig b/arch/mips/configs/nlm_xlp_defconfig index 72a211d2d556..45421a05bb0e 100644 --- a/arch/mips/configs/nlm_xlp_defconfig +++ b/arch/mips/configs/nlm_xlp_defconfig @@ -200,7 +200,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -234,7 +233,6 @@ CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m diff --git a/arch/mips/configs/nlm_xlr_defconfig b/arch/mips/configs/nlm_xlr_defconfig index 4ecb157e56d4..1081972c81da 100644 --- a/arch/mips/configs/nlm_xlr_defconfig +++ b/arch/mips/configs/nlm_xlr_defconfig @@ -198,7 +198,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -232,7 +231,6 @@ CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y -CONFIG_DECNET=m CONFIG_LLC2=m CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig index 30d7c3db884e..2d0506159dfa 100644 --- a/arch/mips/configs/rm200_defconfig +++ b/arch/mips/configs/rm200_defconfig @@ -116,7 +116,6 @@ CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m -CONFIG_DECNET_NF_GRABULATOR=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -137,7 +136,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE=m -CONFIG_DECNET=m CONFIG_NET_SCHED=y CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 66e9a0fd64ff..021da6736570 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -245,8 +245,6 @@ CONFIG_ATM_LANE=m CONFIG_ATM_BR2684=m CONFIG_BRIDGE=m CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_DECNET_ROUTER=y CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index d2d8bf9493d6..47ebb927d4c2 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1786,7 +1786,6 @@ struct net_device_extended_resvd { * @tipc_ptr: TIPC specific data * @atalk_ptr: AppleTalk link * @ip_ptr: IPv4 specific data - * @dn_ptr: DECnet specific data * @ip6_ptr: IPv6 specific data * @ax25_ptr: AX.25 specific data * @ieee80211_ptr: IEEE 802.11 specific data, assign before registering @@ -2065,9 +2064,6 @@ struct net_device { void *atalk_ptr; #endif struct in_device __rcu *ip_ptr; -#if IS_ENABLED(CONFIG_DECNET) - struct dn_dev __rcu *dn_ptr; -#endif struct inet6_dev __rcu *ip6_ptr; #if IS_ENABLED(CONFIG_AX25) void *ax25_ptr; diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h index a1a7ab244fdb..9e82454c97b8 100644 --- a/include/linux/netfilter.h +++ b/include/linux/netfilter.h @@ -240,11 +240,6 @@ static inline int nf_hook(u_int8_t pf, unsigned int hook, struct net *net, hook_head = rcu_dereference(net->nf.hooks_bridge[hook]); #endif break; -#if IS_ENABLED(CONFIG_DECNET) - case NFPROTO_DECNET: - hook_head = rcu_dereference(net->nf.hooks_decnet[hook]); - break; -#endif default: WARN_ON_ONCE(1); break; diff --git a/include/linux/netfilter_defs.h b/include/linux/netfilter_defs.h index 8dddfb151f00..a5f7bef1b3a4 100644 --- a/include/linux/netfilter_defs.h +++ b/include/linux/netfilter_defs.h @@ -7,14 +7,6 @@ /* in/out/forward only */ #define NF_ARP_NUMHOOKS 3 -/* max hook is NF_DN_ROUTE (6), also see uapi/linux/netfilter_decnet.h */ -#define NF_DN_NUMHOOKS 7 - -#if IS_ENABLED(CONFIG_DECNET) -/* Largest hook number + 1, see uapi/linux/netfilter_decnet.h */ -#define NF_MAX_HOOKS NF_DN_NUMHOOKS -#else #define NF_MAX_HOOKS NF_INET_NUMHOOKS -#endif #endif diff --git a/include/net/dn.h b/include/net/dn.h deleted file mode 100644 index 56ab0726c641..000000000000 --- a/include/net/dn.h +++ /dev/null @@ -1,231 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _NET_DN_H -#define _NET_DN_H - -#include <linux/dn.h> -#include <net/sock.h> -#include <net/flow.h> -#include <asm/byteorder.h> -#include <asm/unaligned.h> - -struct dn_scp /* Session Control Port */ -{ - unsigned char state; -#define DN_O 1 /* Open */ -#define DN_CR 2 /* Connect Receive */ -#define DN_DR 3 /* Disconnect Reject */ -#define DN_DRC 4 /* Discon. Rej. Complete*/ -#define DN_CC 5 /* Connect Confirm */ -#define DN_CI 6 /* Connect Initiate */ -#define DN_NR 7 /* No resources */ -#define DN_NC 8 /* No communication */ -#define DN_CD 9 /* Connect Delivery */ -#define DN_RJ 10 /* Rejected */ -#define DN_RUN 11 /* Running */ -#define DN_DI 12 /* Disconnect Initiate */ -#define DN_DIC 13 /* Disconnect Complete */ -#define DN_DN 14 /* Disconnect Notificat */ -#define DN_CL 15 /* Closed */ -#define DN_CN 16 /* Closed Notification */ - - __le16 addrloc; - __le16 addrrem; - __u16 numdat; - __u16 numoth; - __u16 numoth_rcv; - __u16 numdat_rcv; - __u16 ackxmt_dat; - __u16 ackxmt_oth; - __u16 ackrcv_dat; - __u16 ackrcv_oth; - __u8 flowrem_sw; - __u8 flowloc_sw; -#define DN_SEND 2 -#define DN_DONTSEND 1 -#define DN_NOCHANGE 0 - __u16 flowrem_dat; - __u16 flowrem_oth; - __u16 flowloc_dat; - __u16 flowloc_oth; - __u8 services_rem; - __u8 services_loc; - __u8 info_rem; - __u8 info_loc; - - __u16 segsize_rem; - __u16 segsize_loc; - - __u8 nonagle; - __u8 multi_ireq; - __u8 accept_mode; - unsigned long seg_total; /* Running total of current segment */ - - struct optdata_dn conndata_in; - struct optdata_dn conndata_out; - struct optdata_dn discdata_in; - struct optdata_dn discdata_out; - struct accessdata_dn accessdata; - - struct sockaddr_dn addr; /* Local address */ - struct sockaddr_dn peer; /* Remote address */ - - /* - * In this case the RTT estimation is not specified in the - * docs, nor is any back off algorithm. Here we follow well - * known tcp algorithms with a few small variations. - * - * snd_window: Max number of packets we send before we wait for - * an ack to come back. This will become part of a - * more complicated scheme when we support flow - * control. - * - * nsp_srtt: Round-Trip-Time (x8) in jiffies. This is a rolling - * average. - * nsp_rttvar: Round-Trip-Time-Varience (x4) in jiffies. This is the - * varience of the smoothed average (but calculated in - * a simpler way than for normal statistical varience - * calculations). - * - * nsp_rxtshift: Backoff counter. Value is zero normally, each time - * a packet is lost is increases by one until an ack - * is received. Its used to index an array of backoff - * multipliers. - */ -#define NSP_MIN_WINDOW 1 -#define NSP_MAX_WINDOW (0x07fe) - unsigned long max_window; - unsigned long snd_window; -#define NSP_INITIAL_SRTT (HZ) - unsigned long nsp_srtt; -#define NSP_INITIAL_RTTVAR (HZ*3) - unsigned long nsp_rttvar; -#define NSP_MAXRXTSHIFT 12 - unsigned long nsp_rxtshift; - - /* - * Output queues, one for data, one for otherdata/linkservice - */ - struct sk_buff_head data_xmit_queue; - struct sk_buff_head other_xmit_queue; - - /* - * Input queue for other data - */ - struct sk_buff_head other_receive_queue; - int other_report; - - /* - * Stuff to do with the slow timer - */ - unsigned long stamp; /* time of last transmit */ - unsigned long persist; - int (*persist_fxn)(struct sock *sk); - unsigned long keepalive; - void (*keepalive_fxn)(struct sock *sk); - -}; - -static inline struct dn_scp *DN_SK(struct sock *sk) -{ - return (struct dn_scp *)(sk + 1); -} - -/* - * src,dst : Source and Destination DECnet addresses - * hops : Number of hops through the network - * dst_port, src_port : NSP port numbers - * services, info : Useful data extracted from conninit messages - * rt_flags : Routing flags byte - * nsp_flags : NSP layer flags byte - * segsize : Size of segment - * segnum : Number, for data, otherdata and linkservice - * xmit_count : Number of times we've transmitted this skb - * stamp : Time stamp of most recent transmission, used in RTT calculations - * iif: Input interface number - * - * As a general policy, this structure keeps all addresses in network - * byte order, and all else in host byte order. Thus dst, src, dst_port - * and src_port are in network order. All else is in host order. - * - */ -#define DN_SKB_CB(skb) ((struct dn_skb_cb *)(skb)->cb) -struct dn_skb_cb { - __le16 dst; - __le16 src; - __u16 hops; - __le16 dst_port; - __le16 src_port; - __u8 services; - __u8 info; - __u8 rt_flags; - __u8 nsp_flags; - __u16 segsize; - __u16 segnum; - __u16 xmit_count; - unsigned long stamp; - int iif; -}; - -static inline __le16 dn_eth2dn(unsigned char *ethaddr) -{ - return get_unaligned((__le16 *)(ethaddr + 4)); -} - -static inline __le16 dn_saddr2dn(struct sockaddr_dn *saddr) -{ - return *(__le16 *)saddr->sdn_nodeaddr; -} - -static inline void dn_dn2eth(unsigned char *ethaddr, __le16 addr) -{ - __u16 a = le16_to_cpu(addr); - ethaddr[0] = 0xAA; - ethaddr[1] = 0x00; - ethaddr[2] = 0x04; - ethaddr[3] = 0x00; - ethaddr[4] = (__u8)(a & 0xff); - ethaddr[5] = (__u8)(a >> 8); -} - -static inline void dn_sk_ports_copy(struct flowidn *fld, struct dn_scp *scp) -{ - fld->fld_sport = scp->addrloc; - fld->fld_dport = scp->addrrem; -} - -unsigned int dn_mss_from_pmtu(struct net_device *dev, int mtu); -void dn_register_sysctl(void); -void dn_unregister_sysctl(void); - -#define DN_MENUVER_ACC 0x01 -#define DN_MENUVER_USR 0x02 -#define DN_MENUVER_PRX 0x04 -#define DN_MENUVER_UIC 0x08 - -struct sock *dn_sklist_find_listener(struct sockaddr_dn *addr); -struct sock *dn_find_by_skb(struct sk_buff *skb); -#define DN_ASCBUF_LEN 9 -char *dn_addr2asc(__u16, char *); -int dn_destroy_timer(struct sock *sk); - -int dn_sockaddr2username(struct sockaddr_dn *addr, unsigned char *buf, - unsigned char type); -int dn_username2sockaddr(unsigned char *data, int len, struct sockaddr_dn *addr, - unsigned char *type); - -void dn_start_slow_timer(struct sock *sk); -void dn_stop_slow_timer(struct sock *sk); - -extern __le16 decnet_address; -extern int decnet_debug_level; -extern int decnet_time_wait; -extern int decnet_dn_count; -extern int decnet_di_count; -extern int decnet_dr_count; -extern int decnet_no_fc_max_cwnd; - -extern long sysctl_decnet_mem[3]; -extern int sysctl_decnet_wmem[3]; -extern int sysctl_decnet_rmem[3]; - -#endif /* _NET_DN_H */ diff --git a/include/net/dn_dev.h b/include/net/dn_dev.h deleted file mode 100644 index 595b4f6c1eb1..000000000000 --- a/include/net/dn_dev.h +++ /dev/null @@ -1,199 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _NET_DN_DEV_H -#define _NET_DN_DEV_H - - -struct dn_dev; - -struct dn_ifaddr { - struct dn_ifaddr __rcu *ifa_next; - struct dn_dev *ifa_dev; - __le16 ifa_local; - __le16 ifa_address; - __u32 ifa_flags; - __u8 ifa_scope; - char ifa_label[IFNAMSIZ]; - struct rcu_head rcu; -}; - -#define DN_DEV_S_RU 0 /* Run - working normally */ -#define DN_DEV_S_CR 1 /* Circuit Rejected */ -#define DN_DEV_S_DS 2 /* Data Link Start */ -#define DN_DEV_S_RI 3 /* Routing Layer Initialize */ -#define DN_DEV_S_RV 4 /* Routing Layer Verify */ -#define DN_DEV_S_RC 5 /* Routing Layer Complete */ -#define DN_DEV_S_OF 6 /* Off */ -#define DN_DEV_S_HA 7 /* Halt */ - - -/* - * The dn_dev_parms structure contains the set of parameters - * for each device (hence inclusion in the dn_dev structure) - * and an array is used to store the default types of supported - * device (in dn_dev.c). - * - * The type field matches the ARPHRD_ constants and is used in - * searching the list for supported devices when new devices - * come up. - * - * The mode field is used to find out if a device is broadcast, - * multipoint, or pointopoint. Please note that DECnet thinks - * different ways about devices to the rest of the kernel - * so the normal IFF_xxx flags are invalid here. For devices - * which can be any combination of the previously mentioned - * attributes, you can set this on a per device basis by - * installing an up() routine. - * - * The device state field, defines the initial state in which the - * device will come up. In the dn_dev structure, it is the actual - * state. - * - * Things have changed here. I've killed timer1 since it's a user space - * issue for a user space routing deamon to sort out. The kernel does - * not need to be bothered with it. - * - * Timers: - * t2 - Rate limit timer, min time between routing and hello messages - * t3 - Hello timer, send hello messages when it expires - * - * Callbacks: - * up() - Called to initialize device, return value can veto use of - * device with DECnet. - * down() - Called to turn device off when it goes down - * timer3() - Called once for each ifaddr when timer 3 goes off - * - * sysctl - Hook for sysctl things - * - */ -struct dn_dev_parms { - int type; /* ARPHRD_xxx */ - int mode; /* Broadcast, Unicast, Mulitpoint */ -#define DN_DEV_BCAST 1 -#define DN_DEV_UCAST 2 -#define DN_DEV_MPOINT 4 - int state; /* Initial state */ - int forwarding; /* 0=EndNode, 1=L1Router, 2=L2Router */ - unsigned long t2; /* Default value of t2 */ - unsigned long t3; /* Default value of t3 */ - int priority; /* Priority to be a router */ - char *name; /* Name for sysctl */ - int (*up)(struct net_device *); - void (*down)(struct net_device *); - void (*timer3)(struct net_device *, struct dn_ifaddr *ifa); - void *sysctl; -}; - - -struct dn_dev { - struct dn_ifaddr __rcu *ifa_list; - struct net_device *dev; - struct dn_dev_parms parms; - char use_long; - struct timer_list timer; - unsigned long t3; - struct neigh_parms *neigh_parms; - __u8 addr[ETH_ALEN]; - struct neighbour *router; /* Default router on circuit */ - struct neighbour *peer; /* Peer on pointopoint links */ - unsigned long uptime; /* Time device went up in jiffies */ -}; - -struct dn_short_packet { - __u8 msgflg; - __le16 dstnode; - __le16 srcnode; - __u8 forward; -} __packed; - -struct dn_long_packet { - __u8 msgflg; - __u8 d_area; - __u8 d_subarea; - __u8 d_id[6]; - __u8 s_area; - __u8 s_subarea; - __u8 s_id[6]; - __u8 nl2; - __u8 visit_ct; - __u8 s_class; - __u8 pt; -} __packed; - -/*------------------------- DRP - Routing messages ---------------------*/ - -struct endnode_hello_message { - __u8 msgflg; - __u8 tiver[3]; - __u8 id[6]; - __u8 iinfo; - __le16 blksize; - __u8 area; - __u8 seed[8]; - __u8 neighbor[6]; - __le16 timer; - __u8 mpd; - __u8 datalen; - __u8 data[2]; -} __packed; - -struct rtnode_hello_message { - __u8 msgflg; - __u8 tiver[3]; - __u8 id[6]; - __u8 iinfo; - __le16 blksize; - __u8 priority; - __u8 area; - __le16 timer; - __u8 mpd; -} __packed; - - -void dn_dev_init(void); -void dn_dev_cleanup(void); - -int dn_dev_ioctl(unsigned int cmd, void __user *arg); - -void dn_dev_devices_off(void); -void dn_dev_devices_on(void); - -void dn_dev_init_pkt(struct sk_buff *skb); -void dn_dev_veri_pkt(struct sk_buff *skb); -void dn_dev_hello(struct sk_buff *skb); - -void dn_dev_up(struct net_device *); -void dn_dev_down(struct net_device *); - -int dn_dev_set_default(struct net_device *dev, int force); -struct net_device *dn_dev_get_default(void); -int dn_dev_bind_default(__le16 *addr); - -int register_dnaddr_notifier(struct notifier_block *nb); -int unregister_dnaddr_notifier(struct notifier_block *nb); - -static inline int dn_dev_islocal(struct net_device *dev, __le16 addr) -{ - struct dn_dev *dn_db; - struct dn_ifaddr *ifa; - int res = 0; - - rcu_read_lock(); - dn_db = rcu_dereference(dev->dn_ptr); - if (dn_db == NULL) { - printk(KERN_DEBUG "dn_dev_islocal: Called for non DECnet device\n"); - goto out; - } - - for (ifa = rcu_dereference(dn_db->ifa_list); - ifa != NULL; - ifa = rcu_dereference(ifa->ifa_next)) - if ((addr ^ ifa->ifa_local) == 0) { - res = 1; - break; - } -out: - rcu_read_unlock(); - return res; -} - -#endif /* _NET_DN_DEV_H */ diff --git a/include/net/dn_fib.h b/include/net/dn_fib.h deleted file mode 100644 index ccc6e9df178b..000000000000 --- a/include/net/dn_fib.h +++ /dev/null @@ -1,167 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _NET_DN_FIB_H -#define _NET_DN_FIB_H - -#include <linux/netlink.h> -#include <linux/refcount.h> - -extern const struct nla_policy rtm_dn_policy[]; - -struct dn_fib_res { - struct fib_rule *r; - struct dn_fib_info *fi; - unsigned char prefixlen; - unsigned char nh_sel; - unsigned char type; - unsigned char scope; -}; - -struct dn_fib_nh { - struct net_device *nh_dev; - unsigned int nh_flags; - unsigned char nh_scope; - int nh_weight; - int nh_power; - int nh_oif; - __le16 nh_gw; -}; - -struct dn_fib_info { - struct dn_fib_info *fib_next; - struct dn_fib_info *fib_prev; - int fib_treeref; - refcount_t fib_clntref; - int fib_dead; - unsigned int fib_flags; - int fib_protocol; - __le16 fib_prefsrc; - __u32 fib_priority; - __u32 fib_metrics[RTAX_MAX]; - int fib_nhs; - int fib_power; - struct dn_fib_nh fib_nh[0]; -#define dn_fib_dev fib_nh[0].nh_dev -}; - - -#define DN_FIB_RES_RESET(res) ((res).nh_sel = 0) -#define DN_FIB_RES_NH(res) ((res).fi->fib_nh[(res).nh_sel]) - -#define DN_FIB_RES_PREFSRC(res) ((res).fi->fib_prefsrc ? : __dn_fib_res_prefsrc(&res)) -#define DN_FIB_RES_GW(res) (DN_FIB_RES_NH(res).nh_gw) -#define DN_FIB_RES_DEV(res) (DN_FIB_RES_NH(res).nh_dev) -#define DN_FIB_RES_OIF(res) (DN_FIB_RES_NH(res).nh_oif) - -typedef struct { - __le16 datum; -} dn_fib_key_t; - -typedef struct { - __le16 datum; -} dn_fib_hash_t; - -typedef struct { - __u16 datum; -} dn_fib_idx_t; - -struct dn_fib_node { - struct dn_fib_node *fn_next; - struct dn_fib_info *fn_info; -#define DN_FIB_INFO(f) ((f)->fn_info) - dn_fib_key_t fn_key; - u8 fn_type; - u8 fn_scope; - u8 fn_state; -}; - - -struct dn_fib_table { - struct hlist_node hlist; - u32 n; - - int (*insert)(struct dn_fib_table *t, struct rtmsg *r, - struct nlattr *attrs[], struct nlmsghdr *n, - struct netlink_skb_parms *req); - int (*delete)(struct dn_fib_table *t, struct rtmsg *r, - struct nlattr *attrs[], struct nlmsghdr *n, - struct netlink_skb_parms *req); - int (*lookup)(struct dn_fib_table *t, const struct flowidn *fld, - struct dn_fib_res *res); - int (*flush)(struct dn_fib_table *t); - int (*dump)(struct dn_fib_table *t, struct sk_buff *skb, struct netlink_callback *cb); - - unsigned char data[]; -}; - -#ifdef CONFIG_DECNET_ROUTER -/* - * dn_fib.c - */ -void dn_fib_init(void); -void dn_fib_cleanup(void); - -int dn_fib_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); -struct dn_fib_info *dn_fib_create_info(const struct rtmsg *r, - struct nlattr *attrs[], - const struct nlmsghdr *nlh, int *errp); -int dn_fib_semantic_match(int type, struct dn_fib_info *fi, - const struct flowidn *fld, struct dn_fib_res *res); -void dn_fib_release_info(struct dn_fib_info *fi); -void dn_fib_flush(void); -void dn_fib_select_multipath(const struct flowidn *fld, struct dn_fib_res *res); - -/* - * dn_tables.c - */ -struct dn_fib_table *dn_fib_get_table(u32 n, int creat); -struct dn_fib_table *dn_fib_empty_table(void); -void dn_fib_table_init(void); -void dn_fib_table_cleanup(void); - -/* - * dn_rules.c - */ -void dn_fib_rules_init(void); -void dn_fib_rules_cleanup(void); -unsigned int dnet_addr_type(__le16 addr); -int dn_fib_lookup(struct flowidn *fld, struct dn_fib_res *res); - -int dn_fib_dump(struct sk_buff *skb, struct netlink_callback *cb); - -void dn_fib_free_info(struct dn_fib_info *fi); - -static inline void dn_fib_info_put(struct dn_fib_info *fi) -{ - if (refcount_dec_and_test(&fi->fib_clntref)) - dn_fib_free_info(fi); -} - -static inline void dn_fib_res_put(struct dn_fib_res *res) -{ - if (res->fi) - dn_fib_info_put(res->fi); - if (res->r) - fib_rule_put(res->r); -} - -#else /* Endnode */ - -#define dn_fib_init() do { } while(0) -#define dn_fib_cleanup() do { } while(0) - -#define dn_fib_lookup(fl, res) (-ESRCH) -#define dn_fib_info_put(fi) do { } while(0) -#define dn_fib_select_multipath(fl, res) do { } while(0) -#define dn_fib_rules_policy(saddr,res,flags) (0) -#define dn_fib_res_put(res) do { } while(0) - -#endif /* CONFIG_DECNET_ROUTER */ - -static inline __le16 dnet_make_mask(int n) -{ - if (n) - return cpu_to_le16(~((1 << (16 - n)) - 1)); - return cpu_to_le16(0); -} - -#endif /* _NET_DN_FIB_H */ diff --git a/include/net/dn_neigh.h b/include/net/dn_neigh.h deleted file mode 100644 index 2e3e7793973a..000000000000 --- a/include/net/dn_neigh.h +++ /dev/null @@ -1,30 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _NET_DN_NEIGH_H -#define _NET_DN_NEIGH_H - -/* - * The position of the first two fields of - * this structure are critical - SJW - */ -struct dn_neigh { - struct neighbour n; - __le16 addr; - unsigned long flags; -#define DN_NDFLAG_R1 0x0001 /* Router L1 */ -#define DN_NDFLAG_R2 0x0002 /* Router L2 */ -#define DN_NDFLAG_P3 0x0004 /* Phase III Node */ - unsigned long blksize; - __u8 priority; -}; - -void dn_neigh_init(void); -void dn_neigh_cleanup(void); -int dn_neigh_router_hello(struct net *net, struct sock *sk, struct sk_buff *skb); -int dn_neigh_endnode_hello(struct net *net, struct sock *sk, struct sk_buff *skb); -void dn_neigh_pointopoint_hello(struct sk_buff *skb); -int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n); -int dn_to_neigh_output(struct net *net, struct sock *sk, struct sk_buff *skb); - -extern struct neigh_table dn_neigh_table; - -#endif /* _NET_DN_NEIGH_H */ diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h deleted file mode 100644 index f83932b864a9..000000000000 --- a/include/net/dn_nsp.h +++ /dev/null @@ -1,195 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -#ifndef _NET_DN_NSP_H -#define _NET_DN_NSP_H -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - -*******************************************************************************/ -/* dn_nsp.c functions prototyping */ - -void dn_nsp_send_data_ack(struct sock *sk); -void dn_nsp_send_oth_ack(struct sock *sk); -void dn_send_conn_ack(struct sock *sk); -void dn_send_conn_conf(struct sock *sk, gfp_t gfp); -void dn_nsp_send_disc(struct sock *sk, unsigned char type, - unsigned short reason, gfp_t gfp); -void dn_nsp_return_disc(struct sk_buff *skb, unsigned char type, - unsigned short reason); -void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval); -void dn_nsp_send_conninit(struct sock *sk, unsigned char flags); - -void dn_nsp_output(struct sock *sk); -int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, - struct sk_buff_head *q, unsigned short acknum); -void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, gfp_t gfp, - int oob); -unsigned long dn_nsp_persist(struct sock *sk); -int dn_nsp_xmit_timeout(struct sock *sk); - -int dn_nsp_rx(struct sk_buff *); -int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb); - -struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri); -struct sk_buff *dn_alloc_send_skb(struct sock *sk, size_t *size, int noblock, - long timeo, int *err); - -#define NSP_REASON_OK 0 /* No error */ -#define NSP_REASON_NR 1 /* No resources */ -#define NSP_REASON_UN 2 /* Unrecognised node name */ -#define NSP_REASON_SD 3 /* Node shutting down */ -#define NSP_REASON_ID 4 /* Invalid destination end user */ -#define NSP_REASON_ER 5 /* End user lacks resources */ -#define NSP_REASON_OB 6 /* Object too busy */ -#define NSP_REASON_US 7 /* Unspecified error */ -#define NSP_REASON_TP 8 /* Third-Party abort */ -#define NSP_REASON_EA 9 /* End user has aborted the link */ -#define NSP_REASON_IF 10 /* Invalid node name format */ -#define NSP_REASON_LS 11 /* Local node shutdown */ -#define NSP_REASON_LL 32 /* Node lacks logical-link resources */ -#define NSP_REASON_LE 33 /* End user lacks logical-link resources */ -#define NSP_REASON_UR 34 /* Unacceptable RQSTRID or PASSWORD field */ -#define NSP_REASON_UA 36 /* Unacceptable ACCOUNT field */ -#define NSP_REASON_TM 38 /* End user timed out logical link */ -#define NSP_REASON_NU 39 /* Node unreachable */ -#define NSP_REASON_NL 41 /* No-link message */ -#define NSP_REASON_DC 42 /* Disconnect confirm */ -#define NSP_REASON_IO 43 /* Image data field overflow */ - -#define NSP_DISCINIT 0x38 -#define NSP_DISCCONF 0x48 - -/*------------------------- NSP - messages ------------------------------*/ -/* Data Messages */ -/*---------------*/ - -/* Data Messages (data segment/interrupt/link service) */ - -struct nsp_data_seg_msg { - __u8 msgflg; - __le16 dstaddr; - __le16 srcaddr; -} __packed; - -struct nsp_data_opt_msg { - __le16 acknum; - __le16 segnum; - __le16 lsflgs; -} __packed; - -struct nsp_data_opt_msg1 { - __le16 acknum; - __le16 segnum; -} __packed; - - -/* Acknowledgment Message (data/other data) */ -struct nsp_data_ack_msg { - __u8 msgflg; - __le16 dstaddr; - __le16 srcaddr; - __le16 acknum; -} __packed; - -/* Connect Acknowledgment Message */ -struct nsp_conn_ack_msg { - __u8 msgflg; - __le16 dstaddr; -} __packed; - - -/* Connect Initiate/Retransmit Initiate/Connect Confirm */ -struct nsp_conn_init_msg { - __u8 msgflg; -#define NSP_CI 0x18 /* Connect Initiate */ -#define NSP_RCI 0x68 /* Retrans. Conn Init */ - __le16 dstaddr; - __le16 srcaddr; - __u8 services; -#define NSP_FC_NONE 0x00 /* Flow Control None */ -#define NSP_FC_SRC 0x04 /* Seg Req. Count */ -#define NSP_FC_SCMC 0x08 /* Sess. Control Mess */ -#define NSP_FC_MASK 0x0c /* FC type mask */ - __u8 info; - __le16 segsize; -} __packed; - -/* Disconnect Initiate/Disconnect Confirm */ -struct nsp_disconn_init_msg { - __u8 msgflg; - __le16 dstaddr; - __le16 srcaddr; - __le16 reason; -} __packed; - - - -struct srcobj_fmt { - __u8 format; - __u8 task; - __le16 grpcode; - __le16 usrcode; - __u8 dlen; -} __packed; - -/* - * A collection of functions for manipulating the sequence - * numbers used in NSP. Similar in operation to the functions - * of the same name in TCP. - */ -static __inline__ int dn_before(__u16 seq1, __u16 seq2) -{ - seq1 &= 0x0fff; - seq2 &= 0x0fff; - - return (int)((seq1 - seq2) & 0x0fff) > 2048; -} - - -static __inline__ int dn_after(__u16 seq1, __u16 seq2) -{ - seq1 &= 0x0fff; - seq2 &= 0x0fff; - - return (int)((seq2 - seq1) & 0x0fff) > 2048; -} - -static __inline__ int dn_equal(__u16 seq1, __u16 seq2) -{ - return ((seq1 ^ seq2) & 0x0fff) == 0; -} - -static __inline__ int dn_before_or_equal(__u16 seq1, __u16 seq2) -{ - return (dn_before(seq1, seq2) || dn_equal(seq1, seq2)); -} - -static __inline__ void seq_add(__u16 *seq, __u16 off) -{ - (*seq) += off; - (*seq) &= 0x0fff; -} - -static __inline__ int seq_next(__u16 seq1, __u16 seq2) -{ - return dn_equal(seq1 + 1, seq2); -} - -/* - * Can we delay the ack ? - */ -static __inline__ int sendack(__u16 seq) -{ - return (int)((seq & 0x1000) ? 0 : 1); -} - -/* - * Is socket congested ? - */ -static __inline__ int dn_congested(struct sock *sk) -{ - return atomic_read(&sk->sk_rmem_alloc) > (sk->sk_rcvbuf >> 1); -} - -#define DN_MAX_NSP_DATA_HEADER (11) - -#endif /* _NET_DN_NSP_H */ diff --git a/include/net/dn_route.h b/include/net/dn_route.h deleted file mode 100644 index 6f1e94ac0bdf..000000000000 --- a/include/net/dn_route.h +++ /dev/null @@ -1,115 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -#ifndef _NET_DN_ROUTE_H -#define _NET_DN_ROUTE_H - -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - -*******************************************************************************/ - -struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri); -int dn_route_output_sock(struct dst_entry __rcu **pprt, struct flowidn *, - struct sock *sk, int flags); -int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb); -void dn_rt_cache_flush(int delay); -int dn_route_rcv(struct sk_buff *skb, struct net_device *dev, - struct packet_type *pt, struct net_device *orig_dev); - -/* Masks for flags field */ -#define DN_RT_F_PID 0x07 /* Mask for packet type */ -#define DN_RT_F_PF 0x80 /* Padding Follows */ -#define DN_RT_F_VER 0x40 /* Version =0 discard packet if ==1 */ -#define DN_RT_F_IE 0x20 /* Intra Ethernet, Reserved in short pkt */ -#define DN_RT_F_RTS 0x10 /* Packet is being returned to sender */ -#define DN_RT_F_RQR 0x08 /* Return packet to sender upon non-delivery */ - -/* Mask for types of routing packets */ -#define DN_RT_PKT_MSK 0x06 -/* Types of routing packets */ -#define DN_RT_PKT_SHORT 0x02 /* Short routing packet */ -#define DN_RT_PKT_LONG 0x06 /* Long routing packet */ - -/* Mask for control/routing selection */ -#define DN_RT_PKT_CNTL 0x01 /* Set to 1 if a control packet */ -/* Types of control packets */ -#define DN_RT_CNTL_MSK 0x0f /* Mask for control packets */ -#define DN_RT_PKT_INIT 0x01 /* Initialisation packet */ -#define DN_RT_PKT_VERI 0x03 /* Verification Message */ -#define DN_RT_PKT_HELO 0x05 /* Hello and Test Message */ -#define DN_RT_PKT_L1RT 0x07 /* Level 1 Routing Message */ -#define DN_RT_PKT_L2RT 0x09 /* Level 2 Routing Message */ -#define DN_RT_PKT_ERTH 0x0b /* Ethernet Router Hello */ -#define DN_RT_PKT_EEDH 0x0d /* Ethernet EndNode Hello */ - -/* Values for info field in hello message */ -#define DN_RT_INFO_TYPE 0x03 /* Type mask */ -#define DN_RT_INFO_L1RT 0x02 /* L1 Router */ -#define DN_RT_INFO_L2RT 0x01 /* L2 Router */ -#define DN_RT_INFO_ENDN 0x03 /* EndNode */ -#define DN_RT_INFO_VERI 0x04 /* Verification Reqd. */ -#define DN_RT_INFO_RJCT 0x08 /* Reject Flag, Reserved */ -#define DN_RT_INFO_VFLD 0x10 /* Verification Failed, Reserved */ -#define DN_RT_INFO_NOML 0x20 /* No Multicast traffic accepted */ -#define DN_RT_INFO_BLKR 0x40 /* Blocking Requested */ - -/* - * The fl structure is what we used to look up the route. - * The rt_saddr & rt_daddr entries are the same as key.saddr & key.daddr - * except for local input routes, where the rt_saddr = fl.fld_dst and - * rt_daddr = fl.fld_src to allow the route to be used for returning - * packets to the originating host. - */ -struct dn_route { - struct dst_entry dst; - struct dn_route __rcu *dn_next; - - struct neighbour *n; - - struct flowidn fld; - - __le16 rt_saddr; - __le16 rt_daddr; - __le16 rt_gateway; - __le16 rt_local_src; /* Source used for forwarding packets */ - __le16 rt_src_map; - __le16 rt_dst_map; - - unsigned int rt_flags; - unsigned int rt_type; -}; - -static inline bool dn_is_input_route(struct dn_route *rt) -{ - return rt->fld.flowidn_iif != 0; -} - -static inline bool dn_is_output_route(struct dn_route *rt) -{ - return rt->fld.flowidn_iif == 0; -} - -void dn_route_init(void); -void dn_route_cleanup(void); - -#include <net/sock.h> -#include <linux/if_arp.h> - -static inline void dn_rt_send(struct sk_buff *skb) -{ - dev_queue_xmit(skb); -} - -static inline void dn_rt_finish_output(struct sk_buff *skb, char *dst, char *src) -{ - struct net_device *dev = skb->dev; - - if ((dev->type != ARPHRD_ETHER) && (dev->type != ARPHRD_LOOPBACK)) - dst = NULL; - - if (dev_hard_header(skb, dev, ETH_P_DNA_RT, dst, src, skb->len) >= 0) - dn_rt_send(skb); - else - kfree_skb(skb); -} - -#endif /* _NET_DN_ROUTE_H */ diff --git a/include/net/netns/netfilter.h b/include/net/netns/netfilter.h index 1b01427a0d4a..f55b94b05263 100644 --- a/include/net/netns/netfilter.h +++ b/include/net/netns/netfilter.h @@ -26,9 +26,6 @@ struct netns_nf { #ifdef CONFIG_NETFILTER_FAMILY_BRIDGE struct nf_hook_entries __rcu *hooks_bridge[NF_INET_NUMHOOKS]; #endif -#if IS_ENABLED(CONFIG_DECNET) - struct nf_hook_entries __rcu *hooks_decnet[NF_DN_NUMHOOKS]; -#endif #if IS_ENABLED(CONFIG_NF_DEFRAG_IPV4) bool defrag_ipv4; #endif diff --git a/include/uapi/linux/dn.h b/include/uapi/linux/dn.h deleted file mode 100644 index 36ca71bd8bbe..000000000000 --- a/include/uapi/linux/dn.h +++ /dev/null @@ -1,149 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef _LINUX_DN_H -#define _LINUX_DN_H - -#include <linux/ioctl.h> -#include <linux/types.h> -#include <linux/if_ether.h> - -/* - - DECnet Data Structures and Constants - -*/ - -/* - * DNPROTO_NSP can't be the same as SOL_SOCKET, - * so increment each by one (compared to ULTRIX) - */ -#define DNPROTO_NSP 2 /* NSP protocol number */ -#define DNPROTO_ROU 3 /* Routing protocol number */ -#define DNPROTO_NML 4 /* Net mgt protocol number */ -#define DNPROTO_EVL 5 /* Evl protocol number (usr) */ -#define DNPROTO_EVR 6 /* Evl protocol number (evl) */ -#define DNPROTO_NSPT 7 /* NSP trace protocol number */ - - -#define DN_ADDL 2 -#define DN_MAXADDL 2 /* ULTRIX headers have 20 here, but pathworks has 2 */ -#define DN_MAXOPTL 16 -#define DN_MAXOBJL 16 -#define DN_MAXACCL 40 -#define DN_MAXALIASL 128 -#define DN_MAXNODEL 256 -#define DNBUFSIZE 65023 - -/* - * SET/GET Socket options - must match the DSO_ numbers below - */ -#define SO_CONDATA 1 -#define SO_CONACCESS 2 -#define SO_PROXYUSR 3 -#define SO_LINKINFO 7 - -#define DSO_CONDATA 1 /* Set/Get connect data */ -#define DSO_DISDATA 10 /* Set/Get disconnect data */ -#define DSO_CONACCESS 2 /* Set/Get connect access data */ -#define DSO_ACCEPTMODE 4 /* Set/Get accept mode */ -#define DSO_CONACCEPT 5 /* Accept deferred connection */ -#define DSO_CONREJECT 6 /* Reject deferred connection */ -#define DSO_LINKINFO 7 /* Set/Get link information */ -#define DSO_STREAM 8 /* Set socket type to stream */ -#define DSO_SEQPACKET 9 /* Set socket type to sequenced packet */ -#define DSO_MAXWINDOW 11 /* Maximum window size allowed */ -#define DSO_NODELAY 12 /* Turn off nagle */ -#define DSO_CORK 13 /* Wait for more data! */ -#define DSO_SERVICES 14 /* NSP Services field */ -#define DSO_INFO 15 /* NSP Info field */ -#define DSO_MAX 15 /* Maximum option number */ - - -/* LINK States */ -#define LL_INACTIVE 0 -#define LL_CONNECTING 1 -#define LL_RUNNING 2 -#define LL_DISCONNECTING 3 - -#define ACC_IMMED 0 -#define ACC_DEFER 1 - -#define SDF_WILD 1 /* Wild card object */ -#define SDF_PROXY 2 /* Addr eligible for proxy */ -#define SDF_UICPROXY 4 /* Use uic-based proxy */ - -/* Structures */ - - -struct dn_naddr { - __le16 a_len; - __u8 a_addr[DN_MAXADDL]; /* Two bytes little endian */ -}; - -struct sockaddr_dn { - __u16 sdn_family; - __u8 sdn_flags; - __u8 sdn_objnum; - __le16 sdn_objnamel; - __u8 sdn_objname[DN_MAXOBJL]; - struct dn_naddr sdn_add; -}; -#define sdn_nodeaddrl sdn_add.a_len /* Node address length */ -#define sdn_nodeaddr sdn_add.a_addr /* Node address */ - - - -/* - * DECnet set/get DSO_CONDATA, DSO_DISDATA (optional data) structure - */ -struct optdata_dn { - __le16 opt_status; /* Extended status return */ -#define opt_sts opt_status - __le16 opt_optl; /* Length of user data */ - __u8 opt_data[16]; /* User data */ -}; - -struct accessdata_dn { - __u8 acc_accl; - __u8 acc_acc[DN_MAXACCL]; - __u8 acc_passl; - __u8 acc_pass[DN_MAXACCL]; - __u8 acc_userl; - __u8 acc_user[DN_MAXACCL]; -}; - -/* - * DECnet logical link information structure - */ -struct linkinfo_dn { - __u16 idn_segsize; /* Segment size for link */ - __u8 idn_linkstate; /* Logical link state */ -}; - -/* - * Ethernet address format (for DECnet) - */ -union etheraddress { - __u8 dne_addr[ETH_ALEN]; /* Full ethernet address */ - struct { - __u8 dne_hiord[4]; /* DECnet HIORD prefix */ - __u8 dne_nodeaddr[2]; /* DECnet node address */ - } dne_remote; -}; - - -/* - * DECnet physical socket address format - */ -struct dn_addr { - __le16 dna_family; /* AF_DECnet */ - union etheraddress dna_netaddr; /* DECnet ethernet address */ -}; - -#define DECNET_IOCTL_BASE 0x89 /* PROTOPRIVATE range */ - -#define SIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, struct dn_naddr) -#define SIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, struct dn_naddr) -#define OSIOCSNETADDR _IOW(DECNET_IOCTL_BASE, 0xe0, int) -#define OSIOCGNETADDR _IOR(DECNET_IOCTL_BASE, 0xe1, int) - -#endif /* _LINUX_DN_H */ diff --git a/include/uapi/linux/netfilter_decnet.h b/include/uapi/linux/netfilter_decnet.h deleted file mode 100644 index 3c77f54560f2..000000000000 --- a/include/uapi/linux/netfilter_decnet.h +++ /dev/null @@ -1,72 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ -#ifndef __LINUX_DECNET_NETFILTER_H -#define __LINUX_DECNET_NETFILTER_H - -/* DECnet-specific defines for netfilter. - * This file (C) Steve Whitehouse 1999 derived from the - * ipv4 netfilter header file which is - * (C)1998 Rusty Russell -- This code is GPL. - */ - -#include <linux/netfilter.h> - -/* only for userspace compatibility */ -#ifndef __KERNEL__ - -#include <limits.h> /* for INT_MIN, INT_MAX */ - -/* kernel define is in netfilter_defs.h */ -#define NF_DN_NUMHOOKS 7 -#endif /* ! __KERNEL__ */ - -/* DECnet Hooks */ -/* After promisc drops, checksum checks. */ -#define NF_DN_PRE_ROUTING 0 -/* If the packet is destined for this box. */ -#define NF_DN_LOCAL_IN 1 -/* If the packet is destined for another interface. */ -#define NF_DN_FORWARD 2 -/* Packets coming from a local process. */ -#define NF_DN_LOCAL_OUT 3 -/* Packets about to hit the wire. */ -#define NF_DN_POST_ROUTING 4 -/* Input Hello Packets */ -#define NF_DN_HELLO 5 -/* Input Routing Packets */ -#define NF_DN_ROUTE 6 - -enum nf_dn_hook_priorities { - NF_DN_PRI_FIRST = INT_MIN, - NF_DN_PRI_CONNTRACK = -200, - NF_DN_PRI_MANGLE = -150, - NF_DN_PRI_NAT_DST = -100, - NF_DN_PRI_FILTER = 0, - NF_DN_PRI_NAT_SRC = 100, - NF_DN_PRI_DNRTMSG = 200, - NF_DN_PRI_LAST = INT_MAX, -}; - -struct nf_dn_rtmsg { - int nfdn_ifindex; -}; - -#define NFDN_RTMSG(r) ((unsigned char *)(r) + NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg))) - -#ifndef __KERNEL__ -/* backwards compatibility for userspace */ -#define DNRMG_L1_GROUP 0x01 -#define DNRMG_L2_GROUP 0x02 -#endif - -enum { - DNRNG_NLGRP_NONE, -#define DNRNG_NLGRP_NONE DNRNG_NLGRP_NONE - DNRNG_NLGRP_L1, -#define DNRNG_NLGRP_L1 DNRNG_NLGRP_L1 - DNRNG_NLGRP_L2, -#define DNRNG_NLGRP_L2 DNRNG_NLGRP_L2 - __DNRNG_NLGRP_MAX -}; -#define DNRNG_NLGRP_MAX (__DNRNG_NLGRP_MAX - 1) - -#endif /*__LINUX_DECNET_NETFILTER_H*/ diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index a7a91ba005b5..542f86a7800a 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -20,7 +20,7 @@ #define NETLINK_CONNECTOR 11 #define NETLINK_NETFILTER 12 /* netfilter subsystem */ #define NETLINK_IP6_FW 13 -#define NETLINK_DNRTMSG 14 /* DECnet routing messages */ +#define NETLINK_DNRTMSG 14 /* DECnet routing messages (obsolete) */ #define NETLINK_KOBJECT_UEVENT 15 /* Kernel messages to userspace */ #define NETLINK_GENERIC 16 /* leave room for NETLINK_DM (DM Events) */ diff --git a/net/Kconfig b/net/Kconfig index d6567162c1cf..a22c3fb88564 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -204,7 +204,6 @@ config BRIDGE_NETFILTER source "net/netfilter/Kconfig" source "net/ipv4/netfilter/Kconfig" source "net/ipv6/netfilter/Kconfig" -source "net/decnet/netfilter/Kconfig" source "net/bridge/netfilter/Kconfig" endif @@ -221,7 +220,6 @@ source "net/802/Kconfig" source "net/bridge/Kconfig" source "net/dsa/Kconfig" source "net/8021q/Kconfig" -source "net/decnet/Kconfig" source "net/llc/Kconfig" source "drivers/net/appletalk/Kconfig" source "net/x25/Kconfig" diff --git a/net/Makefile b/net/Makefile index 5744bf1997fd..45c03aa92ace 100644 --- a/net/Makefile +++ b/net/Makefile @@ -39,7 +39,6 @@ obj-$(CONFIG_AF_KCM) += kcm/ obj-$(CONFIG_STREAM_PARSER) += strparser/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_L2TP) += l2tp/ -obj-$(CONFIG_DECNET) += decnet/ obj-$(CONFIG_PHONET) += phonet/ ifneq ($(CONFIG_VLAN_8021Q),) obj-y += 8021q/ diff --git a/net/core/dev.c b/net/core/dev.c index 64837bb056ee..02bf39500817 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -10305,9 +10305,7 @@ void netdev_run_todo(void) BUG_ON(!list_empty(&dev->ptype_specific)); WARN_ON(rcu_access_pointer(dev->ip_ptr)); WARN_ON(rcu_access_pointer(dev->ip6_ptr)); -#if IS_ENABLED(CONFIG_DECNET) - WARN_ON(dev->dn_ptr); -#endif + if (dev->priv_destructor) dev->priv_destructor(dev); if (dev->needs_free_netdev) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index e833e7e85a4b..e39863f3ca8d 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1802,9 +1802,6 @@ static struct neigh_table *neigh_find_table(int family) case AF_INET6: tbl = neigh_tables[NEIGH_ND_TABLE]; break; - case AF_DECnet: - tbl = neigh_tables[NEIGH_DN_TABLE]; - break; } return tbl; diff --git a/net/decnet/Kconfig b/net/decnet/Kconfig deleted file mode 100644 index 24336bdb1054..000000000000 --- a/net/decnet/Kconfig +++ /dev/null @@ -1,43 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# DECnet configuration -# -config DECNET - tristate "DECnet Support" - help - The DECnet networking protocol was used in many products made by - Digital (now Compaq). It provides reliable stream and sequenced - packet communications over which run a variety of services similar - to those which run over TCP/IP. - - To find some tools to use with the kernel layer support, please - look at Patrick Caulfield's web site: - <http://linux-decnet.sourceforge.net/>. - - More detailed documentation is available in - <file:Documentation/networking/decnet.rst>. - - Be sure to say Y to "/proc file system support" and "Sysctl support" - below when using DECnet, since you will need sysctl support to aid - in configuration at run time. - - The DECnet code is also available as a module ( = code which can be - inserted in and removed from the running kernel whenever you want). - The module is called decnet. - -config DECNET_ROUTER - bool "DECnet: router support" - depends on DECNET - select FIB_RULES - help - Add support for turning your DECnet Endnode into a level 1 or 2 - router. This is an experimental, but functional option. If you - do say Y here, then make sure that you also say Y to "Kernel/User - network link driver", "Routing messages" and "Network packet - filtering". The first two are required to allow configuration via - rtnetlink (you will need Alexey Kuznetsov's iproute2 package - from <ftp://ftp.tux.org/pub/net/ip-routing/>). The "Network packet - filtering" option will be required for the forthcoming routing daemon - to work. - - See <file:Documentation/networking/decnet.rst> for more information. diff --git a/net/decnet/Makefile b/net/decnet/Makefile deleted file mode 100644 index 07b38e441b2d..000000000000 --- a/net/decnet/Makefile +++ /dev/null @@ -1,10 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 - -obj-$(CONFIG_DECNET) += decnet.o - -decnet-y := af_decnet.o dn_nsp_in.o dn_nsp_out.o \ - dn_route.o dn_dev.o dn_neigh.o dn_timer.o -decnet-$(CONFIG_DECNET_ROUTER) += dn_fib.o dn_rules.o dn_table.o -decnet-y += sysctl_net_decnet.o - -obj-$(CONFIG_NETFILTER) += netfilter/ diff --git a/net/decnet/README b/net/decnet/README deleted file mode 100644 index 60e7ec88c81f..000000000000 --- a/net/decnet/README +++ /dev/null @@ -1,8 +0,0 @@ - Linux DECnet Project - ====================== - -The documentation for this kernel subsystem is available in the -Documentation/networking subdirectory of this distribution and also -on line at http://www.chygwyn.com/DECnet/ - -Steve Whitehouse <SteveW(a)ACM.org> diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c deleted file mode 100644 index 7d542eb46172..000000000000 --- a/net/decnet/af_decnet.c +++ /dev/null @@ -1,2400 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Socket Layer Interface - * - * Authors: Eduardo Marcelo Serrat <emserrat(a)geocities.com> - * Patrick Caulfield <patrick(a)pandh.demon.co.uk> - * - * Changes: - * Steve Whitehouse: Copied from Eduardo Serrat and Patrick Caulfield's - * version of the code. Original copyright preserved - * below. - * Steve Whitehouse: Some bug fixes, cleaning up some code to make it - * compatible with my routing layer. - * Steve Whitehouse: Merging changes from Eduardo Serrat and Patrick - * Caulfield. - * Steve Whitehouse: Further bug fixes, checking module code still works - * with new routing layer. - * Steve Whitehouse: Additional set/get_sockopt() calls. - * Steve Whitehouse: Fixed TIOCINQ ioctl to be same as Eduardo's new - * code. - * Steve Whitehouse: recvmsg() changed to try and behave in a POSIX like - * way. Didn't manage it entirely, but its better. - * Steve Whitehouse: ditto for sendmsg(). - * Steve Whitehouse: A selection of bug fixes to various things. - * Steve Whitehouse: Added TIOCOUTQ ioctl. - * Steve Whitehouse: Fixes to username2sockaddr & sockaddr2username. - * Steve Whitehouse: Fixes to connect() error returns. - * Patrick Caulfield: Fixes to delayed acceptance logic. - * David S. Miller: New socket locking - * Steve Whitehouse: Socket list hashing/locking - * Arnaldo C. Melo: use capable, not suser - * Steve Whitehouse: Removed unused code. Fix to use sk->allocation - * when required. - * Patrick Caulfield: /proc/net/decnet now has object name/number - * Steve Whitehouse: Fixed local port allocation, hashed sk list - * Matthew Wilcox: Fixes for dn_ioctl() - * Steve Whitehouse: New connect/accept logic to allow timeouts and - * prepare for sendpage etc. - */ - - -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - - -HISTORY: - -Version Kernel Date Author/Comments -------- ------ ---- --------------- -Version 0.0.1 2.0.30 01-dic-97 Eduardo Marcelo Serrat - (emserrat(a)geocities.com) - - First Development of DECnet Socket La- - yer for Linux. Only supports outgoing - connections. - -Version 0.0.2 2.1.105 20-jun-98 Patrick J. Caulfield - (patrick(a)pandh.demon.co.uk) - - Port to new kernel development version. - -Version 0.0.3 2.1.106 25-jun-98 Eduardo Marcelo Serrat - (emserrat(a)geocities.com) - _ - Added support for incoming connections - so we can start developing server apps - on Linux. - - - Module Support -Version 0.0.4 2.1.109 21-jul-98 Eduardo Marcelo Serrat - (emserrat(a)geocities.com) - _ - Added support for X11R6.4. Now we can - use DECnet transport for X on Linux!!! - - -Version 0.0.5 2.1.110 01-aug-98 Eduardo Marcelo Serrat - (emserrat(a)geocities.com) - Removed bugs on flow control - Removed bugs on incoming accessdata - order - - -Version 0.0.6 2.1.110 07-aug-98 Eduardo Marcelo Serrat - dn_recvmsg fixes - - Patrick J. Caulfield - dn_bind fixes -*******************************************************************************/ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/socket.h> -#include <linux/in.h> -#include <linux/kernel.h> -#include <linux/sched/signal.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/sockios.h> -#include <linux/net.h> -#include <linux/netdevice.h> -#include <linux/inet.h> -#include <linux/route.h> -#include <linux/netfilter.h> -#include <linux/seq_file.h> -#include <net/sock.h> -#include <net/tcp_states.h> -#include <net/flow.h> -#include <asm/ioctls.h> -#include <linux/capability.h> -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/jiffies.h> -#include <net/net_namespace.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/fib_rules.h> -#include <net/tcp.h> -#include <net/dn.h> -#include <net/dn_nsp.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> -#include <net/dn_fib.h> -#include <net/dn_neigh.h> - -struct dn_sock { - struct sock sk; - struct dn_scp scp; -}; - -static void dn_keepalive(struct sock *sk); - -#define DN_SK_HASH_SHIFT 8 -#define DN_SK_HASH_SIZE (1 << DN_SK_HASH_SHIFT) -#define DN_SK_HASH_MASK (DN_SK_HASH_SIZE - 1) - - -static const struct proto_ops dn_proto_ops; -static DEFINE_RWLOCK(dn_hash_lock); -static struct hlist_head dn_sk_hash[DN_SK_HASH_SIZE]; -static struct hlist_head dn_wild_sk; -static atomic_long_t decnet_memory_allocated; - -static int __dn_setsockopt(struct socket *sock, int level, int optname, - sockptr_t optval, unsigned int optlen, int flags); -static int __dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen, int flags); - -static struct hlist_head *dn_find_list(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - if (scp->addr.sdn_flags & SDF_WILD) - return hlist_empty(&dn_wild_sk) ? &dn_wild_sk : NULL; - - return &dn_sk_hash[le16_to_cpu(scp->addrloc) & DN_SK_HASH_MASK]; -} - -/* - * Valid ports are those greater than zero and not already in use. - */ -static int check_port(__le16 port) -{ - struct sock *sk; - - if (port == 0) - return -1; - - sk_for_each(sk, &dn_sk_hash[le16_to_cpu(port) & DN_SK_HASH_MASK]) { - struct dn_scp *scp = DN_SK(sk); - if (scp->addrloc == port) - return -1; - } - return 0; -} - -static unsigned short port_alloc(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - static unsigned short port = 0x2000; - unsigned short i_port = port; - - while(check_port(cpu_to_le16(++port)) != 0) { - if (port == i_port) - return 0; - } - - scp->addrloc = cpu_to_le16(port); - - return 1; -} - -/* - * Since this is only ever called from user - * level, we don't need a write_lock() version - * of this. - */ -static int dn_hash_sock(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - struct hlist_head *list; - int rv = -EUSERS; - - BUG_ON(sk_hashed(sk)); - - write_lock_bh(&dn_hash_lock); - - if (!scp->addrloc && !port_alloc(sk)) - goto out; - - rv = -EADDRINUSE; - if ((list = dn_find_list(sk)) == NULL) - goto out; - - sk_add_node(sk, list); - rv = 0; -out: - write_unlock_bh(&dn_hash_lock); - return rv; -} - -static void dn_unhash_sock(struct sock *sk) -{ - write_lock(&dn_hash_lock); - sk_del_node_init(sk); - write_unlock(&dn_hash_lock); -} - -static void dn_unhash_sock_bh(struct sock *sk) -{ - write_lock_bh(&dn_hash_lock); - sk_del_node_init(sk); - write_unlock_bh(&dn_hash_lock); -} - -static struct hlist_head *listen_hash(struct sockaddr_dn *addr) -{ - int i; - unsigned int hash = addr->sdn_objnum; - - if (hash == 0) { - hash = addr->sdn_objnamel; - for(i = 0; i < le16_to_cpu(addr->sdn_objnamel); i++) { - hash ^= addr->sdn_objname[i]; - hash ^= (hash << 3); - } - } - - return &dn_sk_hash[hash & DN_SK_HASH_MASK]; -} - -/* - * Called to transform a socket from bound (i.e. with a local address) - * into a listening socket (doesn't need a local port number) and rehashes - * based upon the object name/number. - */ -static void dn_rehash_sock(struct sock *sk) -{ - struct hlist_head *list; - struct dn_scp *scp = DN_SK(sk); - - if (scp->addr.sdn_flags & SDF_WILD) - return; - - write_lock_bh(&dn_hash_lock); - sk_del_node_init(sk); - DN_SK(sk)->addrloc = 0; - list = listen_hash(&DN_SK(sk)->addr); - sk_add_node(sk, list); - write_unlock_bh(&dn_hash_lock); -} - -int dn_sockaddr2username(struct sockaddr_dn *sdn, unsigned char *buf, unsigned char type) -{ - int len = 2; - - *buf++ = type; - - switch (type) { - case 0: - *buf++ = sdn->sdn_objnum; - break; - case 1: - *buf++ = 0; - *buf++ = le16_to_cpu(sdn->sdn_objnamel); - memcpy(buf, sdn->sdn_objname, le16_to_cpu(sdn->sdn_objnamel)); - len = 3 + le16_to_cpu(sdn->sdn_objnamel); - break; - case 2: - memset(buf, 0, 5); - buf += 5; - *buf++ = le16_to_cpu(sdn->sdn_objnamel); - memcpy(buf, sdn->sdn_objname, le16_to_cpu(sdn->sdn_objnamel)); - len = 7 + le16_to_cpu(sdn->sdn_objnamel); - break; - } - - return len; -} - -/* - * On reception of usernames, we handle types 1 and 0 for destination - * addresses only. Types 2 and 4 are used for source addresses, but the - * UIC, GIC are ignored and they are both treated the same way. Type 3 - * is never used as I've no idea what its purpose might be or what its - * format is. - */ -int dn_username2sockaddr(unsigned char *data, int len, struct sockaddr_dn *sdn, unsigned char *fmt) -{ - unsigned char type; - int size = len; - int namel = 12; - - sdn->sdn_objnum = 0; - sdn->sdn_objnamel = cpu_to_le16(0); - memset(sdn->sdn_objname, 0, DN_MAXOBJL); - - if (len < 2) - return -1; - - len -= 2; - *fmt = *data++; - type = *data++; - - switch (*fmt) { - case 0: - sdn->sdn_objnum = type; - return 2; - case 1: - namel = 16; - break; - case 2: - len -= 4; - data += 4; - break; - case 4: - len -= 8; - data += 8; - break; - default: - return -1; - } - - len -= 1; - - if (len < 0) - return -1; - - sdn->sdn_objnamel = cpu_to_le16(*data++); - len -= le16_to_cpu(sdn->sdn_objnamel); - - if ((len < 0) || (le16_to_cpu(sdn->sdn_objnamel) > namel)) - return -1; - - memcpy(sdn->sdn_objname, data, le16_to_cpu(sdn->sdn_objnamel)); - - return size - len; -} - -struct sock *dn_sklist_find_listener(struct sockaddr_dn *addr) -{ - struct hlist_head *list = listen_hash(addr); - struct sock *sk; - - read_lock(&dn_hash_lock); - sk_for_each(sk, list) { - struct dn_scp *scp = DN_SK(sk); - if (sk->sk_state != TCP_LISTEN) - continue; - if (scp->addr.sdn_objnum) { - if (scp->addr.sdn_objnum != addr->sdn_objnum) - continue; - } else { - if (addr->sdn_objnum) - continue; - if (scp->addr.sdn_objnamel != addr->sdn_objnamel) - continue; - if (memcmp(scp->addr.sdn_objname, addr->sdn_objname, le16_to_cpu(addr->sdn_objnamel)) != 0) - continue; - } - sock_hold(sk); - read_unlock(&dn_hash_lock); - return sk; - } - - sk = sk_head(&dn_wild_sk); - if (sk) { - if (sk->sk_state == TCP_LISTEN) - sock_hold(sk); - else - sk = NULL; - } - - read_unlock(&dn_hash_lock); - return sk; -} - -struct sock *dn_find_by_skb(struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct sock *sk; - struct dn_scp *scp; - - read_lock(&dn_hash_lock); - sk_for_each(sk, &dn_sk_hash[le16_to_cpu(cb->dst_port) & DN_SK_HASH_MASK]) { - scp = DN_SK(sk); - if (cb->src != dn_saddr2dn(&scp->peer)) - continue; - if (cb->dst_port != scp->addrloc) - continue; - if (scp->addrrem && (cb->src_port != scp->addrrem)) - continue; - sock_hold(sk); - goto found; - } - sk = NULL; -found: - read_unlock(&dn_hash_lock); - return sk; -} - - - -static void dn_destruct(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - skb_queue_purge(&scp->data_xmit_queue); - skb_queue_purge(&scp->other_xmit_queue); - skb_queue_purge(&scp->other_receive_queue); - - dst_release(rcu_dereference_protected(sk->sk_dst_cache, 1)); -} - -static unsigned long dn_memory_pressure; - -static void dn_enter_memory_pressure(struct sock *sk) -{ - if (!dn_memory_pressure) { - dn_memory_pressure = 1; - } -} - -static struct proto dn_proto = { - .name = "NSP", - .owner = THIS_MODULE, - .enter_memory_pressure = dn_enter_memory_pressure, - .memory_pressure = &dn_memory_pressure, - .memory_allocated = &decnet_memory_allocated, - .sysctl_mem = sysctl_decnet_mem, - .sysctl_wmem = sysctl_decnet_wmem, - .sysctl_rmem = sysctl_decnet_rmem, - .max_header = DN_MAX_NSP_DATA_HEADER + 64, - .obj_size = sizeof(struct dn_sock), -}; - -static struct sock *dn_alloc_sock(struct net *net, struct socket *sock, gfp_t gfp, int kern) -{ - struct dn_scp *scp; - struct sock *sk = sk_alloc(net, PF_DECnet, gfp, &dn_proto, kern); - - if (!sk) - goto out; - - if (sock) - sock->ops = &dn_proto_ops; - sock_init_data(sock, sk); - - sk->sk_backlog_rcv = dn_nsp_backlog_rcv; - sk->sk_destruct = dn_destruct; - sk->sk_no_check_tx = 1; - sk->sk_family = PF_DECnet; - sk->sk_protocol = 0; - sk->sk_allocation = gfp; - sk->sk_sndbuf = READ_ONCE(sysctl_decnet_wmem[1]); - sk->sk_rcvbuf = READ_ONCE(sysctl_decnet_rmem[1]); - - /* Initialization of DECnet Session Control Port */ - scp = DN_SK(sk); - scp->state = DN_O; /* Open */ - scp->numdat = 1; /* Next data seg to tx */ - scp->numoth = 1; /* Next oth data to tx */ - scp->ackxmt_dat = 0; /* Last data seg ack'ed */ - scp->ackxmt_oth = 0; /* Last oth data ack'ed */ - scp->ackrcv_dat = 0; /* Highest data ack recv*/ - scp->ackrcv_oth = 0; /* Last oth data ack rec*/ - scp->flowrem_sw = DN_SEND; - scp->flowloc_sw = DN_SEND; - scp->flowrem_dat = 0; - scp->flowrem_oth = 1; - scp->flowloc_dat = 0; - scp->flowloc_oth = 1; - scp->services_rem = 0; - scp->services_loc = 1 | NSP_FC_NONE; - scp->info_rem = 0; - scp->info_loc = 0x03; /* NSP version 4.1 */ - scp->segsize_rem = 230 - DN_MAX_NSP_DATA_HEADER; /* Default: Updated by remote segsize */ - scp->nonagle = 0; - scp->multi_ireq = 1; - scp->accept_mode = ACC_IMMED; - scp->addr.sdn_family = AF_DECnet; - scp->peer.sdn_family = AF_DECnet; - scp->accessdata.acc_accl = 5; - memcpy(scp->accessdata.acc_acc, "LINUX", 5); - - scp->max_window = NSP_MAX_WINDOW; - scp->snd_window = NSP_MIN_WINDOW; - scp->nsp_srtt = NSP_INITIAL_SRTT; - scp->nsp_rttvar = NSP_INITIAL_RTTVAR; - scp->nsp_rxtshift = 0; - - skb_queue_head_init(&scp->data_xmit_queue); - skb_queue_head_init(&scp->other_xmit_queue); - skb_queue_head_init(&scp->other_receive_queue); - - scp->persist = 0; - scp->persist_fxn = NULL; - scp->keepalive = 10 * HZ; - scp->keepalive_fxn = dn_keepalive; - - dn_start_slow_timer(sk); -out: - return sk; -} - -/* - * Keepalive timer. - * FIXME: Should respond to SO_KEEPALIVE etc. - */ -static void dn_keepalive(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - /* - * By checking the other_data transmit queue is empty - * we are double checking that we are not sending too - * many of these keepalive frames. - */ - if (skb_queue_empty(&scp->other_xmit_queue)) - dn_nsp_send_link(sk, DN_NOCHANGE, 0); -} - - -/* - * Timer for shutdown/destroyed sockets. - * When socket is dead & no packets have been sent for a - * certain amount of time, they are removed by this - * routine. Also takes care of sending out DI & DC - * frames at correct times. - */ -int dn_destroy_timer(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - scp->persist = dn_nsp_persist(sk); - - switch (scp->state) { - case DN_DI: - dn_nsp_send_disc(sk, NSP_DISCINIT, 0, GFP_ATOMIC); - if (scp->nsp_rxtshift >= decnet_di_count) - scp->state = DN_CN; - return 0; - - case DN_DR: - dn_nsp_send_disc(sk, NSP_DISCINIT, 0, GFP_ATOMIC); - if (scp->nsp_rxtshift >= decnet_dr_count) - scp->state = DN_DRC; - return 0; - - case DN_DN: - if (scp->nsp_rxtshift < decnet_dn_count) { - /* printk(KERN_DEBUG "dn_destroy_timer: DN\n"); */ - dn_nsp_send_disc(sk, NSP_DISCCONF, NSP_REASON_DC, - GFP_ATOMIC); - return 0; - } - } - - scp->persist = (HZ * decnet_time_wait); - - if (sk->sk_socket) - return 0; - - if (time_after_eq(jiffies, scp->stamp + HZ * decnet_time_wait)) { - dn_unhash_sock(sk); - sock_put(sk); - return 1; - } - - return 0; -} - -static void dn_destroy_sock(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - scp->nsp_rxtshift = 0; /* reset back off */ - - if (sk->sk_socket) { - if (sk->sk_socket->state != SS_UNCONNECTED) - sk->sk_socket->state = SS_DISCONNECTING; - } - - sk->sk_state = TCP_CLOSE; - - switch (scp->state) { - case DN_DN: - dn_nsp_send_disc(sk, NSP_DISCCONF, NSP_REASON_DC, - sk->sk_allocation); - scp->persist_fxn = dn_destroy_timer; - scp->persist = dn_nsp_persist(sk); - break; - case DN_CR: - scp->state = DN_DR; - goto disc_reject; - case DN_RUN: - scp->state = DN_DI; - fallthrough; - case DN_DI: - case DN_DR: -disc_reject: - dn_nsp_send_disc(sk, NSP_DISCINIT, 0, sk->sk_allocation); - fallthrough; - case DN_NC: - case DN_NR: - case DN_RJ: - case DN_DIC: - case DN_CN: - case DN_DRC: - case DN_CI: - case DN_CD: - scp->persist_fxn = dn_destroy_timer; - scp->persist = dn_nsp_persist(sk); - break; - default: - printk(KERN_DEBUG "DECnet: dn_destroy_sock passed socket in invalid state\n"); - fallthrough; - case DN_O: - dn_stop_slow_timer(sk); - - dn_unhash_sock_bh(sk); - sock_put(sk); - - break; - } -} - -char *dn_addr2asc(__u16 addr, char *buf) -{ - unsigned short node, area; - - node = addr & 0x03ff; - area = addr >> 10; - sprintf(buf, "%hd.%hd", area, node); - - return buf; -} - - - -static int dn_create(struct net *net, struct socket *sock, int protocol, - int kern) -{ - struct sock *sk; - - if (protocol < 0 || protocol > U8_MAX) - return -EINVAL; - - if (!net_eq(net, &init_net)) - return -EAFNOSUPPORT; - - switch (sock->type) { - case SOCK_SEQPACKET: - if (protocol != DNPROTO_NSP) - return -EPROTONOSUPPORT; - break; - case SOCK_STREAM: - break; - default: - return -ESOCKTNOSUPPORT; - } - - - if ((sk = dn_alloc_sock(net, sock, GFP_KERNEL, kern)) == NULL) - return -ENOBUFS; - - sk->sk_protocol = protocol; - - return 0; -} - - -static int -dn_release(struct socket *sock) -{ - struct sock *sk = sock->sk; - - if (sk) { - sock_orphan(sk); - sock_hold(sk); - lock_sock(sk); - dn_destroy_sock(sk); - release_sock(sk); - sock_put(sk); - } - - return 0; -} - -static int dn_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - struct sockaddr_dn *saddr = (struct sockaddr_dn *)uaddr; - struct net_device *dev, *ldev; - int rv; - - if (addr_len != sizeof(struct sockaddr_dn)) - return -EINVAL; - - if (saddr->sdn_family != AF_DECnet) - return -EINVAL; - - if (le16_to_cpu(saddr->sdn_nodeaddrl) && (le16_to_cpu(saddr->sdn_nodeaddrl) != 2)) - return -EINVAL; - - if (le16_to_cpu(saddr->sdn_objnamel) > DN_MAXOBJL) - return -EINVAL; - - if (saddr->sdn_flags & ~SDF_WILD) - return -EINVAL; - - if (!capable(CAP_NET_BIND_SERVICE) && (saddr->sdn_objnum || - (saddr->sdn_flags & SDF_WILD))) - return -EACCES; - - if (!(saddr->sdn_flags & SDF_WILD)) { - if (le16_to_cpu(saddr->sdn_nodeaddrl)) { - rcu_read_lock(); - ldev = NULL; - for_each_netdev_rcu(&init_net, dev) { - if (!dev->dn_ptr) - continue; - if (dn_dev_islocal(dev, dn_saddr2dn(saddr))) { - ldev = dev; - break; - } - } - rcu_read_unlock(); - if (ldev == NULL) - return -EADDRNOTAVAIL; - } - } - - rv = -EINVAL; - lock_sock(sk); - if (sock_flag(sk, SOCK_ZAPPED)) { - memcpy(&scp->addr, saddr, addr_len); - sock_reset_flag(sk, SOCK_ZAPPED); - - rv = dn_hash_sock(sk); - if (rv) - sock_set_flag(sk, SOCK_ZAPPED); - } - release_sock(sk); - - return rv; -} - - -static int dn_auto_bind(struct socket *sock) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - int rv; - - sock_reset_flag(sk, SOCK_ZAPPED); - - scp->addr.sdn_flags = 0; - scp->addr.sdn_objnum = 0; - - /* - * This stuff is to keep compatibility with Eduardo's - * patch. I hope I can dispense with it shortly... - */ - if ((scp->accessdata.acc_accl != 0) && - (scp->accessdata.acc_accl <= 12)) { - - scp->addr.sdn_objnamel = cpu_to_le16(scp->accessdata.acc_accl); - memcpy(scp->addr.sdn_objname, scp->accessdata.acc_acc, le16_to_cpu(scp->addr.sdn_objnamel)); - - scp->accessdata.acc_accl = 0; - memset(scp->accessdata.acc_acc, 0, 40); - } - /* End of compatibility stuff */ - - scp->addr.sdn_add.a_len = cpu_to_le16(2); - rv = dn_dev_bind_default((__le16 *)scp->addr.sdn_add.a_addr); - if (rv == 0) { - rv = dn_hash_sock(sk); - if (rv) - sock_set_flag(sk, SOCK_ZAPPED); - } - - return rv; -} - -static int dn_confirm_accept(struct sock *sk, long *timeo, gfp_t allocation) -{ - struct dn_scp *scp = DN_SK(sk); - DEFINE_WAIT_FUNC(wait, woken_wake_function); - int err; - - if (scp->state != DN_CR) - return -EINVAL; - - scp->state = DN_CC; - scp->segsize_loc = dst_metric_advmss(__sk_dst_get(sk)); - dn_send_conn_conf(sk, allocation); - - add_wait_queue(sk_sleep(sk), &wait); - for(;;) { - release_sock(sk); - if (scp->state == DN_CC) - *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo); - lock_sock(sk); - err = 0; - if (scp->state == DN_RUN) - break; - err = sock_error(sk); - if (err) - break; - err = sock_intr_errno(*timeo); - if (signal_pending(current)) - break; - err = -EAGAIN; - if (!*timeo) - break; - } - remove_wait_queue(sk_sleep(sk), &wait); - if (err == 0) { - sk->sk_socket->state = SS_CONNECTED; - } else if (scp->state != DN_CC) { - sk->sk_socket->state = SS_UNCONNECTED; - } - return err; -} - -static int dn_wait_run(struct sock *sk, long *timeo) -{ - struct dn_scp *scp = DN_SK(sk); - DEFINE_WAIT_FUNC(wait, woken_wake_function); - int err = 0; - - if (scp->state == DN_RUN) - goto out; - - if (!*timeo) - return -EALREADY; - - add_wait_queue(sk_sleep(sk), &wait); - for(;;) { - release_sock(sk); - if (scp->state == DN_CI || scp->state == DN_CC) - *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo); - lock_sock(sk); - err = 0; - if (scp->state == DN_RUN) - break; - err = sock_error(sk); - if (err) - break; - err = sock_intr_errno(*timeo); - if (signal_pending(current)) - break; - err = -ETIMEDOUT; - if (!*timeo) - break; - } - remove_wait_queue(sk_sleep(sk), &wait); -out: - if (err == 0) { - sk->sk_socket->state = SS_CONNECTED; - } else if (scp->state != DN_CI && scp->state != DN_CC) { - sk->sk_socket->state = SS_UNCONNECTED; - } - return err; -} - -static int __dn_connect(struct sock *sk, struct sockaddr_dn *addr, int addrlen, long *timeo, int flags) -{ - struct socket *sock = sk->sk_socket; - struct dn_scp *scp = DN_SK(sk); - int err = -EISCONN; - struct flowidn fld; - struct dst_entry *dst; - - if (sock->state == SS_CONNECTED) - goto out; - - if (sock->state == SS_CONNECTING) { - err = 0; - if (scp->state == DN_RUN) { - sock->state = SS_CONNECTED; - goto out; - } - err = -ECONNREFUSED; - if (scp->state != DN_CI && scp->state != DN_CC) { - sock->state = SS_UNCONNECTED; - goto out; - } - return dn_wait_run(sk, timeo); - } - - err = -EINVAL; - if (scp->state != DN_O) - goto out; - - if (addr == NULL || addrlen != sizeof(struct sockaddr_dn)) - goto out; - if (addr->sdn_family != AF_DECnet) - goto out; - if (addr->sdn_flags & SDF_WILD) - goto out; - - if (sock_flag(sk, SOCK_ZAPPED)) { - err = dn_auto_bind(sk->sk_socket); - if (err) - goto out; - } - - memcpy(&scp->peer, addr, sizeof(struct sockaddr_dn)); - - err = -EHOSTUNREACH; - memset(&fld, 0, sizeof(fld)); - fld.flowidn_oif = sk->sk_bound_dev_if; - fld.daddr = dn_saddr2dn(&scp->peer); - fld.saddr = dn_saddr2dn(&scp->addr); - dn_sk_ports_copy(&fld, scp); - fld.flowidn_proto = DNPROTO_NSP; - if (dn_route_output_sock(&sk->sk_dst_cache, &fld, sk, flags) < 0) - goto out; - dst = __sk_dst_get(sk); - sk->sk_route_caps = dst->dev->features; - sock->state = SS_CONNECTING; - scp->state = DN_CI; - scp->segsize_loc = dst_metric_advmss(dst); - - dn_nsp_send_conninit(sk, NSP_CI); - err = -EINPROGRESS; - if (*timeo) { - err = dn_wait_run(sk, timeo); - } -out: - return err; -} - -static int dn_connect(struct socket *sock, struct sockaddr *uaddr, int addrlen, int flags) -{ - struct sockaddr_dn *addr = (struct sockaddr_dn *)uaddr; - struct sock *sk = sock->sk; - int err; - long timeo = sock_sndtimeo(sk, flags & O_NONBLOCK); - - lock_sock(sk); - err = __dn_connect(sk, addr, addrlen, &timeo, 0); - release_sock(sk); - - return err; -} - -static inline int dn_check_state(struct sock *sk, struct sockaddr_dn *addr, int addrlen, long *timeo, int flags) -{ - struct dn_scp *scp = DN_SK(sk); - - switch (scp->state) { - case DN_RUN: - return 0; - case DN_CR: - return dn_confirm_accept(sk, timeo, sk->sk_allocation); - case DN_CI: - case DN_CC: - return dn_wait_run(sk, timeo); - case DN_O: - return __dn_connect(sk, addr, addrlen, timeo, flags); - } - - return -EINVAL; -} - - -static void dn_access_copy(struct sk_buff *skb, struct accessdata_dn *acc) -{ - unsigned char *ptr = skb->data; - - acc->acc_userl = *ptr++; - memcpy(&acc->acc_user, ptr, acc->acc_userl); - ptr += acc->acc_userl; - - acc->acc_passl = *ptr++; - memcpy(&acc->acc_pass, ptr, acc->acc_passl); - ptr += acc->acc_passl; - - acc->acc_accl = *ptr++; - memcpy(&acc->acc_acc, ptr, acc->acc_accl); - - skb_pull(skb, acc->acc_accl + acc->acc_passl + acc->acc_userl + 3); - -} - -static void dn_user_copy(struct sk_buff *skb, struct optdata_dn *opt) -{ - unsigned char *ptr = skb->data; - u16 len = *ptr++; /* yes, it's 8bit on the wire */ - - BUG_ON(len > 16); /* we've checked the contents earlier */ - opt->opt_optl = cpu_to_le16(len); - opt->opt_status = 0; - memcpy(opt->opt_data, ptr, len); - skb_pull(skb, len + 1); -} - -static struct sk_buff *dn_wait_for_connect(struct sock *sk, long *timeo) -{ - DEFINE_WAIT_FUNC(wait, woken_wake_function); - struct sk_buff *skb = NULL; - int err = 0; - - add_wait_queue(sk_sleep(sk), &wait); - for(;;) { - release_sock(sk); - skb = skb_dequeue(&sk->sk_receive_queue); - if (skb == NULL) { - *timeo = wait_woken(&wait, TASK_INTERRUPTIBLE, *timeo); - skb = skb_dequeue(&sk->sk_receive_queue); - } - lock_sock(sk); - if (skb != NULL) - break; - err = -EINVAL; - if (sk->sk_state != TCP_LISTEN) - break; - err = sock_intr_errno(*timeo); - if (signal_pending(current)) - break; - err = -EAGAIN; - if (!*timeo) - break; - } - remove_wait_queue(sk_sleep(sk), &wait); - - return skb == NULL ? ERR_PTR(err) : skb; -} - -static int dn_accept(struct socket *sock, struct socket *newsock, int flags, - bool kern) -{ - struct sock *sk = sock->sk, *newsk; - struct sk_buff *skb = NULL; - struct dn_skb_cb *cb; - unsigned char menuver; - int err = 0; - unsigned char type; - long timeo = sock_rcvtimeo(sk, flags & O_NONBLOCK); - struct dst_entry *dst; - - lock_sock(sk); - - if (sk->sk_state != TCP_LISTEN || DN_SK(sk)->state != DN_O) { - release_sock(sk); - return -EINVAL; - } - - skb = skb_dequeue(&sk->sk_receive_queue); - if (skb == NULL) { - skb = dn_wait_for_connect(sk, &timeo); - if (IS_ERR(skb)) { - release_sock(sk); - return PTR_ERR(skb); - } - } - - cb = DN_SKB_CB(skb); - sk_acceptq_removed(sk); - newsk = dn_alloc_sock(sock_net(sk), newsock, sk->sk_allocation, kern); - if (newsk == NULL) { - release_sock(sk); - kfree_skb(skb); - return -ENOBUFS; - } - release_sock(sk); - - dst = skb_dst(skb); - sk_dst_set(newsk, dst); - skb_dst_set(skb, NULL); - - DN_SK(newsk)->state = DN_CR; - DN_SK(newsk)->addrrem = cb->src_port; - DN_SK(newsk)->services_rem = cb->services; - DN_SK(newsk)->info_rem = cb->info; - DN_SK(newsk)->segsize_rem = cb->segsize; - DN_SK(newsk)->accept_mode = DN_SK(sk)->accept_mode; - - if (DN_SK(newsk)->segsize_rem < 230) - DN_SK(newsk)->segsize_rem = 230; - - if ((DN_SK(newsk)->services_rem & NSP_FC_MASK) == NSP_FC_NONE) - DN_SK(newsk)->max_window = decnet_no_fc_max_cwnd; - - newsk->sk_state = TCP_LISTEN; - memcpy(&(DN_SK(newsk)->addr), &(DN_SK(sk)->addr), sizeof(struct sockaddr_dn)); - - /* - * If we are listening on a wild socket, we don't want - * the newly created socket on the wrong hash queue. - */ - DN_SK(newsk)->addr.sdn_flags &= ~SDF_WILD; - - skb_pull(skb, dn_username2sockaddr(skb->data, skb->len, &(DN_SK(newsk)->addr), &type)); - skb_pull(skb, dn_username2sockaddr(skb->data, skb->len, &(DN_SK(newsk)->peer), &type)); - *(__le16 *)(DN_SK(newsk)->peer.sdn_add.a_addr) = cb->src; - *(__le16 *)(DN_SK(newsk)->addr.sdn_add.a_addr) = cb->dst; - - menuver = *skb->data; - skb_pull(skb, 1); - - if (menuver & DN_MENUVER_ACC) - dn_access_copy(skb, &(DN_SK(newsk)->accessdata)); - - if (menuver & DN_MENUVER_USR) - dn_user_copy(skb, &(DN_SK(newsk)->conndata_in)); - - if (menuver & DN_MENUVER_PRX) - DN_SK(newsk)->peer.sdn_flags |= SDF_PROXY; - - if (menuver & DN_MENUVER_UIC) - DN_SK(newsk)->peer.sdn_flags |= SDF_UICPROXY; - - kfree_skb(skb); - - memcpy(&(DN_SK(newsk)->conndata_out), &(DN_SK(sk)->conndata_out), - sizeof(struct optdata_dn)); - memcpy(&(DN_SK(newsk)->discdata_out), &(DN_SK(sk)->discdata_out), - sizeof(struct optdata_dn)); - - lock_sock(newsk); - err = dn_hash_sock(newsk); - if (err == 0) { - sock_reset_flag(newsk, SOCK_ZAPPED); - dn_send_conn_ack(newsk); - - /* - * Here we use sk->sk_allocation since although the conn conf is - * for the newsk, the context is the old socket. - */ - if (DN_SK(newsk)->accept_mode == ACC_IMMED) - err = dn_confirm_accept(newsk, &timeo, - sk->sk_allocation); - } - release_sock(newsk); - return err; -} - - -static int dn_getname(struct socket *sock, struct sockaddr *uaddr,int peer) -{ - struct sockaddr_dn *sa = (struct sockaddr_dn *)uaddr; - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - - lock_sock(sk); - - if (peer) { - if ((sock->state != SS_CONNECTED && - sock->state != SS_CONNECTING) && - scp->accept_mode == ACC_IMMED) { - release_sock(sk); - return -ENOTCONN; - } - - memcpy(sa, &scp->peer, sizeof(struct sockaddr_dn)); - } else { - memcpy(sa, &scp->addr, sizeof(struct sockaddr_dn)); - } - - release_sock(sk); - - return sizeof(struct sockaddr_dn); -} - - -static __poll_t dn_poll(struct file *file, struct socket *sock, poll_table *wait) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - __poll_t mask = datagram_poll(file, sock, wait); - - if (!skb_queue_empty_lockless(&scp->other_receive_queue)) - mask |= EPOLLRDBAND; - - return mask; -} - -static int dn_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - int err = -EOPNOTSUPP; - long amount = 0; - struct sk_buff *skb; - int val; - - switch(cmd) - { - case SIOCGIFADDR: - case SIOCSIFADDR: - return dn_dev_ioctl(cmd, (void __user *)arg); - - case SIOCATMARK: - lock_sock(sk); - val = !skb_queue_empty(&scp->other_receive_queue); - if (scp->state != DN_RUN) - val = -ENOTCONN; - release_sock(sk); - return val; - - case TIOCOUTQ: - amount = sk->sk_sndbuf - sk_wmem_alloc_get(sk); - if (amount < 0) - amount = 0; - err = put_user(amount, (int __user *)arg); - break; - - case TIOCINQ: - lock_sock(sk); - skb = skb_peek(&scp->other_receive_queue); - if (skb) { - amount = skb->len; - } else { - skb_queue_walk(&sk->sk_receive_queue, skb) - amount += skb->len; - } - release_sock(sk); - err = put_user(amount, (int __user *)arg); - break; - - default: - err = -ENOIOCTLCMD; - break; - } - - return err; -} - -static int dn_listen(struct socket *sock, int backlog) -{ - struct sock *sk = sock->sk; - int err = -EINVAL; - - lock_sock(sk); - - if (sock_flag(sk, SOCK_ZAPPED)) - goto out; - - if ((DN_SK(sk)->state != DN_O) || (sk->sk_state == TCP_LISTEN)) - goto out; - - sk->sk_max_ack_backlog = backlog; - sk->sk_ack_backlog = 0; - sk->sk_state = TCP_LISTEN; - err = 0; - dn_rehash_sock(sk); - -out: - release_sock(sk); - - return err; -} - - -static int dn_shutdown(struct socket *sock, int how) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - int err = -ENOTCONN; - - lock_sock(sk); - - if (sock->state == SS_UNCONNECTED) - goto out; - - err = 0; - if (sock->state == SS_DISCONNECTING) - goto out; - - err = -EINVAL; - if (scp->state == DN_O) - goto out; - - if (how != SHUT_RDWR) - goto out; - - sk->sk_shutdown = SHUTDOWN_MASK; - dn_destroy_sock(sk); - err = 0; - -out: - release_sock(sk); - - return err; -} - -static int dn_setsockopt(struct socket *sock, int level, int optname, - sockptr_t optval, unsigned int optlen) -{ - struct sock *sk = sock->sk; - int err; - - lock_sock(sk); - err = __dn_setsockopt(sock, level, optname, optval, optlen, 0); - release_sock(sk); -#ifdef CONFIG_NETFILTER - /* we need to exclude all possible ENOPROTOOPTs except default case */ - if (err == -ENOPROTOOPT && optname != DSO_LINKINFO && - optname != DSO_STREAM && optname != DSO_SEQPACKET) - err = nf_setsockopt(sk, PF_DECnet, optname, optval, optlen); -#endif - - return err; -} - -static int __dn_setsockopt(struct socket *sock, int level, int optname, - sockptr_t optval, unsigned int optlen, int flags) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - long timeo; - union { - struct optdata_dn opt; - struct accessdata_dn acc; - int mode; - unsigned long win; - int val; - unsigned char services; - unsigned char info; - } u; - int err; - - if (optlen && sockptr_is_null(optval)) - return -EINVAL; - - if (optlen > sizeof(u)) - return -EINVAL; - - if (copy_from_sockptr(&u, optval, optlen)) - return -EFAULT; - - switch (optname) { - case DSO_CONDATA: - if (sock->state == SS_CONNECTED) - return -EISCONN; - if ((scp->state != DN_O) && (scp->state != DN_CR)) - return -EINVAL; - - if (optlen != sizeof(struct optdata_dn)) - return -EINVAL; - - if (le16_to_cpu(u.opt.opt_optl) > 16) - return -EINVAL; - - memcpy(&scp->conndata_out, &u.opt, optlen); - break; - - case DSO_DISDATA: - if (sock->state != SS_CONNECTED && - scp->accept_mode == ACC_IMMED) - return -ENOTCONN; - - if (optlen != sizeof(struct optdata_dn)) - return -EINVAL; - - if (le16_to_cpu(u.opt.opt_optl) > 16) - return -EINVAL; - - memcpy(&scp->discdata_out, &u.opt, optlen); - break; - - case DSO_CONACCESS: - if (sock->state == SS_CONNECTED) - return -EISCONN; - if (scp->state != DN_O) - return -EINVAL; - - if (optlen != sizeof(struct accessdata_dn)) - return -EINVAL; - - if ((u.acc.acc_accl > DN_MAXACCL) || - (u.acc.acc_passl > DN_MAXACCL) || - (u.acc.acc_userl > DN_MAXACCL)) - return -EINVAL; - - memcpy(&scp->accessdata, &u.acc, optlen); - break; - - case DSO_ACCEPTMODE: - if (sock->state == SS_CONNECTED) - return -EISCONN; - if (scp->state != DN_O) - return -EINVAL; - - if (optlen != sizeof(int)) - return -EINVAL; - - if ((u.mode != ACC_IMMED) && (u.mode != ACC_DEFER)) - return -EINVAL; - - scp->accept_mode = (unsigned char)u.mode; - break; - - case DSO_CONACCEPT: - if (scp->state != DN_CR) - return -EINVAL; - timeo = sock_rcvtimeo(sk, 0); - err = dn_confirm_accept(sk, &timeo, sk->sk_allocation); - return err; - - case DSO_CONREJECT: - if (scp->state != DN_CR) - return -EINVAL; - - scp->state = DN_DR; - sk->sk_shutdown = SHUTDOWN_MASK; - dn_nsp_send_disc(sk, 0x38, 0, sk->sk_allocation); - break; - - case DSO_MAXWINDOW: - if (optlen != sizeof(unsigned long)) - return -EINVAL; - if (u.win > NSP_MAX_WINDOW) - u.win = NSP_MAX_WINDOW; - if (u.win == 0) - return -EINVAL; - scp->max_window = u.win; - if (scp->snd_window > u.win) - scp->snd_window = u.win; - break; - - case DSO_NODELAY: - if (optlen != sizeof(int)) - return -EINVAL; - if (scp->nonagle == TCP_NAGLE_CORK) - return -EINVAL; - scp->nonagle = (u.val == 0) ? 0 : TCP_NAGLE_OFF; - /* if (scp->nonagle == 1) { Push pending frames } */ - break; - - case DSO_CORK: - if (optlen != sizeof(int)) - return -EINVAL; - if (scp->nonagle == TCP_NAGLE_OFF) - return -EINVAL; - scp->nonagle = (u.val == 0) ? 0 : TCP_NAGLE_CORK; - /* if (scp->nonagle == 0) { Push pending frames } */ - break; - - case DSO_SERVICES: - if (optlen != sizeof(unsigned char)) - return -EINVAL; - if ((u.services & ~NSP_FC_MASK) != 0x01) - return -EINVAL; - if ((u.services & NSP_FC_MASK) == NSP_FC_MASK) - return -EINVAL; - scp->services_loc = u.services; - break; - - case DSO_INFO: - if (optlen != sizeof(unsigned char)) - return -EINVAL; - if (u.info & 0xfc) - return -EINVAL; - scp->info_loc = u.info; - break; - - case DSO_LINKINFO: - case DSO_STREAM: - case DSO_SEQPACKET: - default: - return -ENOPROTOOPT; - } - - return 0; -} - -static int dn_getsockopt(struct socket *sock, int level, int optname, char __user *optval, int __user *optlen) -{ - struct sock *sk = sock->sk; - int err; - - lock_sock(sk); - err = __dn_getsockopt(sock, level, optname, optval, optlen, 0); - release_sock(sk); -#ifdef CONFIG_NETFILTER - if (err == -ENOPROTOOPT && optname != DSO_STREAM && - optname != DSO_SEQPACKET && optname != DSO_CONACCEPT && - optname != DSO_CONREJECT) { - int len; - - if (get_user(len, optlen)) - return -EFAULT; - - err = nf_getsockopt(sk, PF_DECnet, optname, optval, &len); - if (err >= 0) - err = put_user(len, optlen); - } -#endif - - return err; -} - -static int __dn_getsockopt(struct socket *sock, int level,int optname, char __user *optval,int __user *optlen, int flags) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - struct linkinfo_dn link; - unsigned int r_len; - void *r_data = NULL; - unsigned int val; - - if(get_user(r_len , optlen)) - return -EFAULT; - - switch (optname) { - case DSO_CONDATA: - if (r_len > sizeof(struct optdata_dn)) - r_len = sizeof(struct optdata_dn); - r_data = &scp->conndata_in; - break; - - case DSO_DISDATA: - if (r_len > sizeof(struct optdata_dn)) - r_len = sizeof(struct optdata_dn); - r_data = &scp->discdata_in; - break; - - case DSO_CONACCESS: - if (r_len > sizeof(struct accessdata_dn)) - r_len = sizeof(struct accessdata_dn); - r_data = &scp->accessdata; - break; - - case DSO_ACCEPTMODE: - if (r_len > sizeof(unsigned char)) - r_len = sizeof(unsigned char); - r_data = &scp->accept_mode; - break; - - case DSO_LINKINFO: - if (r_len > sizeof(struct linkinfo_dn)) - r_len = sizeof(struct linkinfo_dn); - - memset(&link, 0, sizeof(link)); - - switch (sock->state) { - case SS_CONNECTING: - link.idn_linkstate = LL_CONNECTING; - break; - case SS_DISCONNECTING: - link.idn_linkstate = LL_DISCONNECTING; - break; - case SS_CONNECTED: - link.idn_linkstate = LL_RUNNING; - break; - default: - link.idn_linkstate = LL_INACTIVE; - } - - link.idn_segsize = scp->segsize_rem; - r_data = &link; - break; - - case DSO_MAXWINDOW: - if (r_len > sizeof(unsigned long)) - r_len = sizeof(unsigned long); - r_data = &scp->max_window; - break; - - case DSO_NODELAY: - if (r_len > sizeof(int)) - r_len = sizeof(int); - val = (scp->nonagle == TCP_NAGLE_OFF); - r_data = &val; - break; - - case DSO_CORK: - if (r_len > sizeof(int)) - r_len = sizeof(int); - val = (scp->nonagle == TCP_NAGLE_CORK); - r_data = &val; - break; - - case DSO_SERVICES: - if (r_len > sizeof(unsigned char)) - r_len = sizeof(unsigned char); - r_data = &scp->services_rem; - break; - - case DSO_INFO: - if (r_len > sizeof(unsigned char)) - r_len = sizeof(unsigned char); - r_data = &scp->info_rem; - break; - - case DSO_STREAM: - case DSO_SEQPACKET: - case DSO_CONACCEPT: - case DSO_CONREJECT: - default: - return -ENOPROTOOPT; - } - - if (r_data) { - if (copy_to_user(optval, r_data, r_len)) - return -EFAULT; - if (put_user(r_len, optlen)) - return -EFAULT; - } - - return 0; -} - - -static int dn_data_ready(struct sock *sk, struct sk_buff_head *q, int flags, int target) -{ - struct sk_buff *skb; - int len = 0; - - if (flags & MSG_OOB) - return !skb_queue_empty(q) ? 1 : 0; - - skb_queue_walk(q, skb) { - struct dn_skb_cb *cb = DN_SKB_CB(skb); - len += skb->len; - - if (cb->nsp_flags & 0x40) { - /* SOCK_SEQPACKET reads to EOM */ - if (sk->sk_type == SOCK_SEQPACKET) - return 1; - /* so does SOCK_STREAM unless WAITALL is specified */ - if (!(flags & MSG_WAITALL)) - return 1; - } - - /* minimum data length for read exceeded */ - if (len >= target) - return 1; - } - - return 0; -} - - -static int dn_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, - int flags) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - struct sk_buff_head *queue = &sk->sk_receive_queue; - size_t target = size > 1 ? 1 : 0; - size_t copied = 0; - int rv = 0; - struct sk_buff *skb, *n; - struct dn_skb_cb *cb = NULL; - unsigned char eor = 0; - long timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT); - - lock_sock(sk); - - if (sock_flag(sk, SOCK_ZAPPED)) { - rv = -EADDRNOTAVAIL; - goto out; - } - - if (sk->sk_shutdown & RCV_SHUTDOWN) { - rv = 0; - goto out; - } - - rv = dn_check_state(sk, NULL, 0, &timeo, flags); - if (rv) - goto out; - - if (flags & ~(MSG_CMSG_COMPAT|MSG_PEEK|MSG_OOB|MSG_WAITALL|MSG_DONTWAIT|MSG_NOSIGNAL)) { - rv = -EOPNOTSUPP; - goto out; - } - - if (flags & MSG_OOB) - queue = &scp->other_receive_queue; - - if (flags & MSG_WAITALL) - target = size; - - - /* - * See if there is data ready to read, sleep if there isn't - */ - for(;;) { - DEFINE_WAIT_FUNC(wait, woken_wake_function); - - if (sk->sk_err) - goto out; - - if (!skb_queue_empty(&scp->other_receive_queue)) { - if (!(flags & MSG_OOB)) { - msg->msg_flags |= MSG_OOB; - if (!scp->other_report) { - scp->other_report = 1; - goto out; - } - } - } - - if (scp->state != DN_RUN) - goto out; - - if (signal_pending(current)) { - rv = sock_intr_errno(timeo); - goto out; - } - - if (dn_data_ready(sk, queue, flags, target)) - break; - - if (flags & MSG_DONTWAIT) { - rv = -EWOULDBLOCK; - goto out; - } - - add_wait_queue(sk_sleep(sk), &wait); - sk_set_bit(SOCKWQ_ASYNC_WAITDATA, sk); - sk_wait_event(sk, &timeo, dn_data_ready(sk, queue, flags, target), &wait); - sk_clear_bit(SOCKWQ_ASYNC_WAITDATA, sk); - remove_wait_queue(sk_sleep(sk), &wait); - } - - skb_queue_walk_safe(queue, skb, n) { - unsigned int chunk = skb->len; - cb = DN_SKB_CB(skb); - - if ((chunk + copied) > size) - chunk = size - copied; - - if (memcpy_to_msg(msg, skb->data, chunk)) { - rv = -EFAULT; - break; - } - copied += chunk; - - if (!(flags & MSG_PEEK)) - skb_pull(skb, chunk); - - eor = cb->nsp_flags & 0x40; - - if (skb->len == 0) { - skb_unlink(skb, queue); - kfree_skb(skb); - /* - * N.B. Don't refer to skb or cb after this point - * in loop. - */ - if ((scp->flowloc_sw == DN_DONTSEND) && !dn_congested(sk)) { - scp->flowloc_sw = DN_SEND; - dn_nsp_send_link(sk, DN_SEND, 0); - } - } - - if (eor) { - if (sk->sk_type == SOCK_SEQPACKET) - break; - if (!(flags & MSG_WAITALL)) - break; - } - - if (flags & MSG_OOB) - break; - - if (copied >= target) - break; - } - - rv = copied; - - - if (eor && (sk->sk_type == SOCK_SEQPACKET)) - msg->msg_flags |= MSG_EOR; - -out: - if (rv == 0) - rv = (flags & MSG_PEEK) ? -sk->sk_err : sock_error(sk); - - if ((rv >= 0) && msg->msg_name) { - __sockaddr_check_size(sizeof(struct sockaddr_dn)); - memcpy(msg->msg_name, &scp->peer, sizeof(struct sockaddr_dn)); - msg->msg_namelen = sizeof(struct sockaddr_dn); - } - - release_sock(sk); - - return rv; -} - - -static inline int dn_queue_too_long(struct dn_scp *scp, struct sk_buff_head *queue, int flags) -{ - unsigned char fctype = scp->services_rem & NSP_FC_MASK; - if (skb_queue_len(queue) >= scp->snd_window) - return 1; - if (fctype != NSP_FC_NONE) { - if (flags & MSG_OOB) { - if (scp->flowrem_oth == 0) - return 1; - } else { - if (scp->flowrem_dat == 0) - return 1; - } - } - return 0; -} - -/* - * The DECnet spec requires that the "routing layer" accepts packets which - * are at least 230 bytes in size. This excludes any headers which the NSP - * layer might add, so we always assume that we'll be using the maximal - * length header on data packets. The variation in length is due to the - * inclusion (or not) of the two 16 bit acknowledgement fields so it doesn't - * make much practical difference. - */ -unsigned int dn_mss_from_pmtu(struct net_device *dev, int mtu) -{ - unsigned int mss = 230 - DN_MAX_NSP_DATA_HEADER; - if (dev) { - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - mtu -= LL_RESERVED_SPACE(dev); - if (dn_db->use_long) - mtu -= 21; - else - mtu -= 6; - mtu -= DN_MAX_NSP_DATA_HEADER; - } else { - /* - * 21 = long header, 16 = guess at MAC header length - */ - mtu -= (21 + DN_MAX_NSP_DATA_HEADER + 16); - } - if (mtu > mss) - mss = mtu; - return mss; -} - -static inline unsigned int dn_current_mss(struct sock *sk, int flags) -{ - struct dst_entry *dst = __sk_dst_get(sk); - struct dn_scp *scp = DN_SK(sk); - int mss_now = min_t(int, scp->segsize_loc, scp->segsize_rem); - - /* Other data messages are limited to 16 bytes per packet */ - if (flags & MSG_OOB) - return 16; - - /* This works out the maximum size of segment we can send out */ - if (dst) { - u32 mtu = dst_mtu(dst); - mss_now = min_t(int, dn_mss_from_pmtu(dst->dev, mtu), mss_now); - } - - return mss_now; -} - -/* - * N.B. We get the timeout wrong here, but then we always did get it - * wrong before and this is another step along the road to correcting - * it. It ought to get updated each time we pass through the routine, - * but in practise it probably doesn't matter too much for now. - */ -static inline struct sk_buff *dn_alloc_send_pskb(struct sock *sk, - unsigned long datalen, int noblock, - int *errcode) -{ - struct sk_buff *skb = sock_alloc_send_skb(sk, datalen, - noblock, errcode); - if (skb) { - skb->protocol = htons(ETH_P_DNA_RT); - skb->pkt_type = PACKET_OUTGOING; - } - return skb; -} - -static int dn_sendmsg(struct socket *sock, struct msghdr *msg, size_t size) -{ - struct sock *sk = sock->sk; - struct dn_scp *scp = DN_SK(sk); - size_t mss; - struct sk_buff_head *queue = &scp->data_xmit_queue; - int flags = msg->msg_flags; - int err = 0; - size_t sent = 0; - int addr_len = msg->msg_namelen; - DECLARE_SOCKADDR(struct sockaddr_dn *, addr, msg->msg_name); - struct sk_buff *skb = NULL; - struct dn_skb_cb *cb; - size_t len; - unsigned char fctype; - long timeo; - - if (flags & ~(MSG_TRYHARD|MSG_OOB|MSG_DONTWAIT|MSG_EOR|MSG_NOSIGNAL|MSG_MORE|MSG_CMSG_COMPAT)) - return -EOPNOTSUPP; - - if (addr_len && (addr_len != sizeof(struct sockaddr_dn))) - return -EINVAL; - - lock_sock(sk); - timeo = sock_sndtimeo(sk, flags & MSG_DONTWAIT); - /* - * The only difference between stream sockets and sequenced packet - * sockets is that the stream sockets always behave as if MSG_EOR - * has been set. - */ - if (sock->type == SOCK_STREAM) { - if (flags & MSG_EOR) { - err = -EINVAL; - goto out; - } - flags |= MSG_EOR; - } - - - err = dn_check_state(sk, addr, addr_len, &timeo, flags); - if (err) - goto out_err; - - if (sk->sk_shutdown & SEND_SHUTDOWN) { - err = -EPIPE; - if (!(flags & MSG_NOSIGNAL)) - send_sig(SIGPIPE, current, 0); - goto out_err; - } - - if ((flags & MSG_TRYHARD) && sk->sk_dst_cache) - dst_negative_advice(sk); - - mss = scp->segsize_rem; - fctype = scp->services_rem & NSP_FC_MASK; - - mss = dn_current_mss(sk, flags); - - if (flags & MSG_OOB) { - queue = &scp->other_xmit_queue; - if (size > mss) { - err = -EMSGSIZE; - goto out; - } - } - - scp->persist_fxn = dn_nsp_xmit_timeout; - - while(sent < size) { - err = sock_error(sk); - if (err) - goto out; - - if (signal_pending(current)) { - err = sock_intr_errno(timeo); - goto out; - } - - /* - * Calculate size that we wish to send. - */ - len = size - sent; - - if (len > mss) - len = mss; - - /* - * Wait for queue size to go down below the window - * size. - */ - if (dn_queue_too_long(scp, queue, flags)) { - DEFINE_WAIT_FUNC(wait, woken_wake_function); - - if (flags & MSG_DONTWAIT) { - err = -EWOULDBLOCK; - goto out; - } - - add_wait_queue(sk_sleep(sk), &wait); - sk_set_bit(SOCKWQ_ASYNC_WAITDATA, sk); - sk_wait_event(sk, &timeo, - !dn_queue_too_long(scp, queue, flags), &wait); - sk_clear_bit(SOCKWQ_ASYNC_WAITDATA, sk); - remove_wait_queue(sk_sleep(sk), &wait); - continue; - } - - /* - * Get a suitably sized skb. - * 64 is a bit of a hack really, but its larger than any - * link-layer headers and has served us well as a good - * guess as to their real length. - */ - skb = dn_alloc_send_pskb(sk, len + 64 + DN_MAX_NSP_DATA_HEADER, - flags & MSG_DONTWAIT, &err); - - if (err) - break; - - if (!skb) - continue; - - cb = DN_SKB_CB(skb); - - skb_reserve(skb, 64 + DN_MAX_NSP_DATA_HEADER); - - if (memcpy_from_msg(skb_put(skb, len), msg, len)) { - err = -EFAULT; - goto out; - } - - if (flags & MSG_OOB) { - cb->nsp_flags = 0x30; - if (fctype != NSP_FC_NONE) - scp->flowrem_oth--; - } else { - cb->nsp_flags = 0x00; - if (scp->seg_total == 0) - cb->nsp_flags |= 0x20; - - scp->seg_total += len; - - if (((sent + len) == size) && (flags & MSG_EOR)) { - cb->nsp_flags |= 0x40; - scp->seg_total = 0; - if (fctype == NSP_FC_SCMC) - scp->flowrem_dat--; - } - if (fctype == NSP_FC_SRC) - scp->flowrem_dat--; - } - - sent += len; - dn_nsp_queue_xmit(sk, skb, sk->sk_allocation, flags & MSG_OOB); - skb = NULL; - - scp->persist = dn_nsp_persist(sk); - - } -out: - - kfree_skb(skb); - - release_sock(sk); - - return sent ? sent : err; - -out_err: - err = sk_stream_error(sk, flags, err); - release_sock(sk); - return err; -} - -static int dn_device_event(struct notifier_block *this, unsigned long event, - void *ptr) -{ - struct net_device *dev = netdev_notifier_info_to_dev(ptr); - - if (!net_eq(dev_net(dev), &init_net)) - return NOTIFY_DONE; - - switch (event) { - case NETDEV_UP: - dn_dev_up(dev); - break; - case NETDEV_DOWN: - dn_dev_down(dev); - break; - default: - break; - } - - return NOTIFY_DONE; -} - -static struct notifier_block dn_dev_notifier = { - .notifier_call = dn_device_event, -}; - -static struct packet_type dn_dix_packet_type __read_mostly = { - .type = cpu_to_be16(ETH_P_DNA_RT), - .func = dn_route_rcv, -}; - -#ifdef CONFIG_PROC_FS -struct dn_iter_state { - int bucket; -}; - -static struct sock *dn_socket_get_first(struct seq_file *seq) -{ - struct dn_iter_state *state = seq->private; - struct sock *n = NULL; - - for(state->bucket = 0; - state->bucket < DN_SK_HASH_SIZE; - ++state->bucket) { - n = sk_head(&dn_sk_hash[state->bucket]); - if (n) - break; - } - - return n; -} - -static struct sock *dn_socket_get_next(struct seq_file *seq, - struct sock *n) -{ - struct dn_iter_state *state = seq->private; - - n = sk_next(n); - while (!n) { - if (++state->bucket >= DN_SK_HASH_SIZE) - break; - n = sk_head(&dn_sk_hash[state->bucket]); - } - return n; -} - -static struct sock *socket_get_idx(struct seq_file *seq, loff_t *pos) -{ - struct sock *sk = dn_socket_get_first(seq); - - if (sk) { - while(*pos && (sk = dn_socket_get_next(seq, sk))) - --*pos; - } - return *pos ? NULL : sk; -} - -static void *dn_socket_get_idx(struct seq_file *seq, loff_t pos) -{ - void *rc; - read_lock_bh(&dn_hash_lock); - rc = socket_get_idx(seq, &pos); - if (!rc) { - read_unlock_bh(&dn_hash_lock); - } - return rc; -} - -static void *dn_socket_seq_start(struct seq_file *seq, loff_t *pos) -{ - return *pos ? dn_socket_get_idx(seq, *pos - 1) : SEQ_START_TOKEN; -} - -static void *dn_socket_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - void *rc; - - if (v == SEQ_START_TOKEN) { - rc = dn_socket_get_idx(seq, 0); - goto out; - } - - rc = dn_socket_get_next(seq, v); - if (rc) - goto out; - read_unlock_bh(&dn_hash_lock); -out: - ++*pos; - return rc; -} - -static void dn_socket_seq_stop(struct seq_file *seq, void *v) -{ - if (v && v != SEQ_START_TOKEN) - read_unlock_bh(&dn_hash_lock); -} - -#define IS_NOT_PRINTABLE(x) ((x) < 32 || (x) > 126) - -static void dn_printable_object(struct sockaddr_dn *dn, unsigned char *buf) -{ - int i; - - switch (le16_to_cpu(dn->sdn_objnamel)) { - case 0: - sprintf(buf, "%d", dn->sdn_objnum); - break; - default: - for (i = 0; i < le16_to_cpu(dn->sdn_objnamel); i++) { - buf[i] = dn->sdn_objname[i]; - if (IS_NOT_PRINTABLE(buf[i])) - buf[i] = '.'; - } - buf[i] = 0; - } -} - -static char *dn_state2asc(unsigned char state) -{ - switch (state) { - case DN_O: - return "OPEN"; - case DN_CR: - return " CR"; - case DN_DR: - return " DR"; - case DN_DRC: - return " DRC"; - case DN_CC: - return " CC"; - case DN_CI: - return " CI"; - case DN_NR: - return " NR"; - case DN_NC: - return " NC"; - case DN_CD: - return " CD"; - case DN_RJ: - return " RJ"; - case DN_RUN: - return " RUN"; - case DN_DI: - return " DI"; - case DN_DIC: - return " DIC"; - case DN_DN: - return " DN"; - case DN_CL: - return " CL"; - case DN_CN: - return " CN"; - } - - return "????"; -} - -static inline void dn_socket_format_entry(struct seq_file *seq, struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - char buf1[DN_ASCBUF_LEN]; - char buf2[DN_ASCBUF_LEN]; - char local_object[DN_MAXOBJL+3]; - char remote_object[DN_MAXOBJL+3]; - - dn_printable_object(&scp->addr, local_object); - dn_printable_object(&scp->peer, remote_object); - - seq_printf(seq, - "%6s/%04X %04d:%04d %04d:%04d %01d %-16s " - "%6s/%04X %04d:%04d %04d:%04d %01d %-16s %4s %s\n", - dn_addr2asc(le16_to_cpu(dn_saddr2dn(&scp->addr)), buf1), - scp->addrloc, - scp->numdat, - scp->numoth, - scp->ackxmt_dat, - scp->ackxmt_oth, - scp->flowloc_sw, - local_object, - dn_addr2asc(le16_to_cpu(dn_saddr2dn(&scp->peer)), buf2), - scp->addrrem, - scp->numdat_rcv, - scp->numoth_rcv, - scp->ackrcv_dat, - scp->ackrcv_oth, - scp->flowrem_sw, - remote_object, - dn_state2asc(scp->state), - ((scp->accept_mode == ACC_IMMED) ? "IMMED" : "DEFER")); -} - -static int dn_socket_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) { - seq_puts(seq, "Local Remote\n"); - } else { - dn_socket_format_entry(seq, v); - } - return 0; -} - -static const struct seq_operations dn_socket_seq_ops = { - .start = dn_socket_seq_start, - .next = dn_socket_seq_next, - .stop = dn_socket_seq_stop, - .show = dn_socket_seq_show, -}; -#endif - -static const struct net_proto_family dn_family_ops = { - .family = AF_DECnet, - .create = dn_create, - .owner = THIS_MODULE, -}; - -static const struct proto_ops dn_proto_ops = { - .family = AF_DECnet, - .owner = THIS_MODULE, - .release = dn_release, - .bind = dn_bind, - .connect = dn_connect, - .socketpair = sock_no_socketpair, - .accept = dn_accept, - .getname = dn_getname, - .poll = dn_poll, - .ioctl = dn_ioctl, - .listen = dn_listen, - .shutdown = dn_shutdown, - .setsockopt = dn_setsockopt, - .getsockopt = dn_getsockopt, - .sendmsg = dn_sendmsg, - .recvmsg = dn_recvmsg, - .mmap = sock_no_mmap, - .sendpage = sock_no_sendpage, -}; - -MODULE_DESCRIPTION("The Linux DECnet Network Protocol"); -MODULE_AUTHOR("Linux DECnet Project Team"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_NETPROTO(PF_DECnet); - -static const char banner[] __initconst = KERN_INFO -"NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team\n"; - -static int __init decnet_init(void) -{ - int rc; - - printk(banner); - - rc = proto_register(&dn_proto, 1); - if (rc != 0) - goto out; - - dn_neigh_init(); - dn_dev_init(); - dn_route_init(); - dn_fib_init(); - - sock_register(&dn_family_ops); - dev_add_pack(&dn_dix_packet_type); - register_netdevice_notifier(&dn_dev_notifier); - - proc_create_seq_private("decnet", 0444, init_net.proc_net, - &dn_socket_seq_ops, sizeof(struct dn_iter_state), - NULL); - dn_register_sysctl(); -out: - return rc; - -} -module_init(decnet_init); - -/* - * Prevent DECnet module unloading until its fixed properly. - * Requires an audit of the code to check for memory leaks and - * initialisation problems etc. - */ -#if 0 -static void __exit decnet_exit(void) -{ - sock_unregister(AF_DECnet); - rtnl_unregister_all(PF_DECnet); - dev_remove_pack(&dn_dix_packet_type); - - dn_unregister_sysctl(); - - unregister_netdevice_notifier(&dn_dev_notifier); - - dn_route_cleanup(); - dn_dev_cleanup(); - dn_neigh_cleanup(); - dn_fib_cleanup(); - - remove_proc_entry("decnet", init_net.proc_net); - - proto_unregister(&dn_proto); - - rcu_barrier(); /* Wait for completion of call_rcu()'s */ -} -module_exit(decnet_exit); -#endif diff --git a/net/decnet/dn_dev.c b/net/decnet/dn_dev.c deleted file mode 100644 index 15d42353f1a3..000000000000 --- a/net/decnet/dn_dev.c +++ /dev/null @@ -1,1435 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Device Layer - * - * Authors: Steve Whitehouse <SteveW(a)ACM.org> - * Eduardo Marcelo Serrat <emserrat(a)geocities.com> - * - * Changes: - * Steve Whitehouse : Devices now see incoming frames so they - * can mark on who it came from. - * Steve Whitehouse : Fixed bug in creating neighbours. Each neighbour - * can now have a device specific setup func. - * Steve Whitehouse : Added /proc/sys/net/decnet/conf/<dev>/ - * Steve Whitehouse : Fixed bug which sometimes killed timer - * Steve Whitehouse : Multiple ifaddr support - * Steve Whitehouse : SIOCGIFCONF is now a compile time option - * Steve Whitehouse : /proc/sys/net/decnet/conf/<sys>/forwarding - * Steve Whitehouse : Removed timer1 - it's a user space issue now - * Patrick Caulfield : Fixed router hello message format - * Steve Whitehouse : Got rid of constant sizes for blksize for - * devices. All mtu based now. - */ - -#include <linux/capability.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/init.h> -#include <linux/net.h> -#include <linux/netdevice.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/if_addr.h> -#include <linux/if_arp.h> -#include <linux/if_ether.h> -#include <linux/skbuff.h> -#include <linux/sysctl.h> -#include <linux/notifier.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/uaccess.h> -#include <net/net_namespace.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/fib_rules.h> -#include <net/netlink.h> -#include <net/dn.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> -#include <net/dn_neigh.h> -#include <net/dn_fib.h> - -#define DN_IFREQ_SIZE (offsetof(struct ifreq, ifr_ifru) + sizeof(struct sockaddr_dn)) - -static char dn_rt_all_end_mcast[ETH_ALEN] = {0xAB,0x00,0x00,0x04,0x00,0x00}; -static char dn_rt_all_rt_mcast[ETH_ALEN] = {0xAB,0x00,0x00,0x03,0x00,0x00}; -static char dn_hiord[ETH_ALEN] = {0xAA,0x00,0x04,0x00,0x00,0x00}; -static unsigned char dn_eco_version[3] = {0x02,0x00,0x00}; - -extern struct neigh_table dn_neigh_table; - -/* - * decnet_address is kept in network order. - */ -__le16 decnet_address = 0; - -static DEFINE_SPINLOCK(dndev_lock); -static struct net_device *decnet_default_device; -static BLOCKING_NOTIFIER_HEAD(dnaddr_chain); - -static struct dn_dev *dn_dev_create(struct net_device *dev, int *err); -static void dn_dev_delete(struct net_device *dev); -static void dn_ifaddr_notify(int event, struct dn_ifaddr *ifa); - -static int dn_eth_up(struct net_device *); -static void dn_eth_down(struct net_device *); -static void dn_send_brd_hello(struct net_device *dev, struct dn_ifaddr *ifa); -static void dn_send_ptp_hello(struct net_device *dev, struct dn_ifaddr *ifa); - -static struct dn_dev_parms dn_dev_list[] = { -{ - .type = ARPHRD_ETHER, /* Ethernet */ - .mode = DN_DEV_BCAST, - .state = DN_DEV_S_RU, - .t2 = 1, - .t3 = 10, - .name = "ethernet", - .up = dn_eth_up, - .down = dn_eth_down, - .timer3 = dn_send_brd_hello, -}, -{ - .type = ARPHRD_IPGRE, /* DECnet tunneled over GRE in IP */ - .mode = DN_DEV_BCAST, - .state = DN_DEV_S_RU, - .t2 = 1, - .t3 = 10, - .name = "ipgre", - .timer3 = dn_send_brd_hello, -}, -#if 0 -{ - .type = ARPHRD_X25, /* Bog standard X.25 */ - .mode = DN_DEV_UCAST, - .state = DN_DEV_S_DS, - .t2 = 1, - .t3 = 120, - .name = "x25", - .timer3 = dn_send_ptp_hello, -}, -#endif -#if 0 -{ - .type = ARPHRD_PPP, /* DECnet over PPP */ - .mode = DN_DEV_BCAST, - .state = DN_DEV_S_RU, - .t2 = 1, - .t3 = 10, - .name = "ppp", - .timer3 = dn_send_brd_hello, -}, -#endif -{ - .type = ARPHRD_DDCMP, /* DECnet over DDCMP */ - .mode = DN_DEV_UCAST, - .state = DN_DEV_S_DS, - .t2 = 1, - .t3 = 120, - .name = "ddcmp", - .timer3 = dn_send_ptp_hello, -}, -{ - .type = ARPHRD_LOOPBACK, /* Loopback interface - always last */ - .mode = DN_DEV_BCAST, - .state = DN_DEV_S_RU, - .t2 = 1, - .t3 = 10, - .name = "loopback", - .timer3 = dn_send_brd_hello, -} -}; - -#define DN_DEV_LIST_SIZE ARRAY_SIZE(dn_dev_list) - -#define DN_DEV_PARMS_OFFSET(x) offsetof(struct dn_dev_parms, x) - -#ifdef CONFIG_SYSCTL - -static int min_t2[] = { 1 }; -static int max_t2[] = { 60 }; /* No max specified, but this seems sensible */ -static int min_t3[] = { 1 }; -static int max_t3[] = { 8191 }; /* Must fit in 16 bits when multiplied by BCT3MULT or T3MULT */ - -static int min_priority[1]; -static int max_priority[] = { 127 }; /* From DECnet spec */ - -static int dn_forwarding_proc(struct ctl_table *, int, void *, size_t *, - loff_t *); -static struct dn_dev_sysctl_table { - struct ctl_table_header *sysctl_header; - struct ctl_table dn_dev_vars[5]; -} dn_dev_sysctl = { - NULL, - { - { - .procname = "forwarding", - .data = (void *)DN_DEV_PARMS_OFFSET(forwarding), - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = dn_forwarding_proc, - }, - { - .procname = "priority", - .data = (void *)DN_DEV_PARMS_OFFSET(priority), - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_priority, - .extra2 = &max_priority - }, - { - .procname = "t2", - .data = (void *)DN_DEV_PARMS_OFFSET(t2), - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_t2, - .extra2 = &max_t2 - }, - { - .procname = "t3", - .data = (void *)DN_DEV_PARMS_OFFSET(t3), - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_t3, - .extra2 = &max_t3 - }, - { } - }, -}; - -static void dn_dev_sysctl_register(struct net_device *dev, struct dn_dev_parms *parms) -{ - struct dn_dev_sysctl_table *t; - int i; - - char path[sizeof("net/decnet/conf/") + IFNAMSIZ]; - - t = kmemdup(&dn_dev_sysctl, sizeof(*t), GFP_KERNEL); - if (t == NULL) - return; - - for(i = 0; i < ARRAY_SIZE(t->dn_dev_vars) - 1; i++) { - long offset = (long)t->dn_dev_vars[i].data; - t->dn_dev_vars[i].data = ((char *)parms) + offset; - } - - snprintf(path, sizeof(path), "net/decnet/conf/%s", - dev? dev->name : parms->name); - - t->dn_dev_vars[0].extra1 = (void *)dev; - - t->sysctl_header = register_net_sysctl(&init_net, path, t->dn_dev_vars); - if (t->sysctl_header == NULL) - kfree(t); - else - parms->sysctl = t; -} - -static void dn_dev_sysctl_unregister(struct dn_dev_parms *parms) -{ - if (parms->sysctl) { - struct dn_dev_sysctl_table *t = parms->sysctl; - parms->sysctl = NULL; - unregister_net_sysctl_table(t->sysctl_header); - kfree(t); - } -} - -static int dn_forwarding_proc(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ -#ifdef CONFIG_DECNET_ROUTER - struct net_device *dev = table->extra1; - struct dn_dev *dn_db; - int err; - int tmp, old; - - if (table->extra1 == NULL) - return -EINVAL; - - dn_db = rcu_dereference_raw(dev->dn_ptr); - old = dn_db->parms.forwarding; - - err = proc_dointvec(table, write, buffer, lenp, ppos); - - if ((err >= 0) && write) { - if (dn_db->parms.forwarding < 0) - dn_db->parms.forwarding = 0; - if (dn_db->parms.forwarding > 2) - dn_db->parms.forwarding = 2; - /* - * What an ugly hack this is... its works, just. It - * would be nice if sysctl/proc were just that little - * bit more flexible so I don't have to write a special - * routine, or suffer hacks like this - SJW - */ - tmp = dn_db->parms.forwarding; - dn_db->parms.forwarding = old; - if (dn_db->parms.down) - dn_db->parms.down(dev); - dn_db->parms.forwarding = tmp; - if (dn_db->parms.up) - dn_db->parms.up(dev); - } - - return err; -#else - return -EINVAL; -#endif -} - -#else /* CONFIG_SYSCTL */ -static void dn_dev_sysctl_unregister(struct dn_dev_parms *parms) -{ -} -static void dn_dev_sysctl_register(struct net_device *dev, struct dn_dev_parms *parms) -{ -} - -#endif /* CONFIG_SYSCTL */ - -static inline __u16 mtu2blksize(struct net_device *dev) -{ - u32 blksize = dev->mtu; - if (blksize > 0xffff) - blksize = 0xffff; - - if (dev->type == ARPHRD_ETHER || - dev->type == ARPHRD_PPP || - dev->type == ARPHRD_IPGRE || - dev->type == ARPHRD_LOOPBACK) - blksize -= 2; - - return (__u16)blksize; -} - -static struct dn_ifaddr *dn_dev_alloc_ifa(void) -{ - struct dn_ifaddr *ifa; - - ifa = kzalloc(sizeof(*ifa), GFP_KERNEL); - - return ifa; -} - -static void dn_dev_free_ifa(struct dn_ifaddr *ifa) -{ - kfree_rcu(ifa, rcu); -} - -static void dn_dev_del_ifa(struct dn_dev *dn_db, struct dn_ifaddr __rcu **ifap, int destroy) -{ - struct dn_ifaddr *ifa1 = rtnl_dereference(*ifap); - unsigned char mac_addr[6]; - struct net_device *dev = dn_db->dev; - - ASSERT_RTNL(); - - *ifap = ifa1->ifa_next; - - if (dn_db->dev->type == ARPHRD_ETHER) { - if (ifa1->ifa_local != dn_eth2dn(dev->dev_addr)) { - dn_dn2eth(mac_addr, ifa1->ifa_local); - dev_mc_del(dev, mac_addr); - } - } - - dn_ifaddr_notify(RTM_DELADDR, ifa1); - blocking_notifier_call_chain(&dnaddr_chain, NETDEV_DOWN, ifa1); - if (destroy) { - dn_dev_free_ifa(ifa1); - - if (dn_db->ifa_list == NULL) - dn_dev_delete(dn_db->dev); - } -} - -static int dn_dev_insert_ifa(struct dn_dev *dn_db, struct dn_ifaddr *ifa) -{ - struct net_device *dev = dn_db->dev; - struct dn_ifaddr *ifa1; - unsigned char mac_addr[6]; - - ASSERT_RTNL(); - - /* Check for duplicates */ - for (ifa1 = rtnl_dereference(dn_db->ifa_list); - ifa1 != NULL; - ifa1 = rtnl_dereference(ifa1->ifa_next)) { - if (ifa1->ifa_local == ifa->ifa_local) - return -EEXIST; - } - - if (dev->type == ARPHRD_ETHER) { - if (ifa->ifa_local != dn_eth2dn(dev->dev_addr)) { - dn_dn2eth(mac_addr, ifa->ifa_local); - dev_mc_add(dev, mac_addr); - } - } - - ifa->ifa_next = dn_db->ifa_list; - rcu_assign_pointer(dn_db->ifa_list, ifa); - - dn_ifaddr_notify(RTM_NEWADDR, ifa); - blocking_notifier_call_chain(&dnaddr_chain, NETDEV_UP, ifa); - - return 0; -} - -static int dn_dev_set_ifa(struct net_device *dev, struct dn_ifaddr *ifa) -{ - struct dn_dev *dn_db = rtnl_dereference(dev->dn_ptr); - int rv; - - if (dn_db == NULL) { - int err; - dn_db = dn_dev_create(dev, &err); - if (dn_db == NULL) - return err; - } - - ifa->ifa_dev = dn_db; - - if (dev->flags & IFF_LOOPBACK) - ifa->ifa_scope = RT_SCOPE_HOST; - - rv = dn_dev_insert_ifa(dn_db, ifa); - if (rv) - dn_dev_free_ifa(ifa); - return rv; -} - - -int dn_dev_ioctl(unsigned int cmd, void __user *arg) -{ - char buffer[DN_IFREQ_SIZE]; - struct ifreq *ifr = (struct ifreq *)buffer; - struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr; - struct dn_dev *dn_db; - struct net_device *dev; - struct dn_ifaddr *ifa = NULL; - struct dn_ifaddr __rcu **ifap = NULL; - int ret = 0; - - if (copy_from_user(ifr, arg, DN_IFREQ_SIZE)) - return -EFAULT; - ifr->ifr_name[IFNAMSIZ-1] = 0; - - dev_load(&init_net, ifr->ifr_name); - - switch (cmd) { - case SIOCGIFADDR: - break; - case SIOCSIFADDR: - if (!capable(CAP_NET_ADMIN)) - return -EACCES; - if (sdn->sdn_family != AF_DECnet) - return -EINVAL; - break; - default: - return -EINVAL; - } - - rtnl_lock(); - - if ((dev = __dev_get_by_name(&init_net, ifr->ifr_name)) == NULL) { - ret = -ENODEV; - goto done; - } - - if ((dn_db = rtnl_dereference(dev->dn_ptr)) != NULL) { - for (ifap = &dn_db->ifa_list; - (ifa = rtnl_dereference(*ifap)) != NULL; - ifap = &ifa->ifa_next) - if (strcmp(ifr->ifr_name, ifa->ifa_label) == 0) - break; - } - - if (ifa == NULL && cmd != SIOCSIFADDR) { - ret = -EADDRNOTAVAIL; - goto done; - } - - switch (cmd) { - case SIOCGIFADDR: - *((__le16 *)sdn->sdn_nodeaddr) = ifa->ifa_local; - if (copy_to_user(arg, ifr, DN_IFREQ_SIZE)) - ret = -EFAULT; - break; - - case SIOCSIFADDR: - if (!ifa) { - if ((ifa = dn_dev_alloc_ifa()) == NULL) { - ret = -ENOBUFS; - break; - } - memcpy(ifa->ifa_label, dev->name, IFNAMSIZ); - } else { - if (ifa->ifa_local == dn_saddr2dn(sdn)) - break; - dn_dev_del_ifa(dn_db, ifap, 0); - } - - ifa->ifa_local = ifa->ifa_address = dn_saddr2dn(sdn); - - ret = dn_dev_set_ifa(dev, ifa); - } -done: - rtnl_unlock(); - - return ret; -} - -struct net_device *dn_dev_get_default(void) -{ - struct net_device *dev; - - spin_lock(&dndev_lock); - dev = decnet_default_device; - if (dev) { - if (dev->dn_ptr) - dev_hold(dev); - else - dev = NULL; - } - spin_unlock(&dndev_lock); - - return dev; -} - -int dn_dev_set_default(struct net_device *dev, int force) -{ - struct net_device *old = NULL; - int rv = -EBUSY; - if (!dev->dn_ptr) - return -ENODEV; - - spin_lock(&dndev_lock); - if (force || decnet_default_device == NULL) { - old = decnet_default_device; - decnet_default_device = dev; - rv = 0; - } - spin_unlock(&dndev_lock); - - if (old) - dev_put(old); - return rv; -} - -static void dn_dev_check_default(struct net_device *dev) -{ - spin_lock(&dndev_lock); - if (dev == decnet_default_device) { - decnet_default_device = NULL; - } else { - dev = NULL; - } - spin_unlock(&dndev_lock); - - if (dev) - dev_put(dev); -} - -/* - * Called with RTNL - */ -static struct dn_dev *dn_dev_by_index(int ifindex) -{ - struct net_device *dev; - struct dn_dev *dn_dev = NULL; - - dev = __dev_get_by_index(&init_net, ifindex); - if (dev) - dn_dev = rtnl_dereference(dev->dn_ptr); - - return dn_dev; -} - -static const struct nla_policy dn_ifa_policy[IFA_MAX+1] = { - [IFA_ADDRESS] = { .type = NLA_U16 }, - [IFA_LOCAL] = { .type = NLA_U16 }, - [IFA_LABEL] = { .type = NLA_STRING, - .len = IFNAMSIZ - 1 }, - [IFA_FLAGS] = { .type = NLA_U32 }, -}; - -static int dn_nl_deladdr(struct sk_buff *skb, struct nlmsghdr *nlh, - struct netlink_ext_ack *extack) -{ - struct net *net = sock_net(skb->sk); - struct nlattr *tb[IFA_MAX+1]; - struct dn_dev *dn_db; - struct ifaddrmsg *ifm; - struct dn_ifaddr *ifa; - struct dn_ifaddr __rcu **ifap; - int err = -EINVAL; - - if (!netlink_capable(skb, CAP_NET_ADMIN)) - return -EPERM; - - if (!net_eq(net, &init_net)) - goto errout; - - err = nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFA_MAX, - dn_ifa_policy, extack); - if (err < 0) - goto errout; - - err = -ENODEV; - ifm = nlmsg_data(nlh); - if ((dn_db = dn_dev_by_index(ifm->ifa_index)) == NULL) - goto errout; - - err = -EADDRNOTAVAIL; - for (ifap = &dn_db->ifa_list; - (ifa = rtnl_dereference(*ifap)) != NULL; - ifap = &ifa->ifa_next) { - if (tb[IFA_LOCAL] && - nla_memcmp(tb[IFA_LOCAL], &ifa->ifa_local, 2)) - continue; - - if (tb[IFA_LABEL] && nla_strcmp(tb[IFA_LABEL], ifa->ifa_label)) - continue; - - dn_dev_del_ifa(dn_db, ifap, 1); - return 0; - } - -errout: - return err; -} - -static int dn_nl_newaddr(struct sk_buff *skb, struct nlmsghdr *nlh, - struct netlink_ext_ack *extack) -{ - struct net *net = sock_net(skb->sk); - struct nlattr *tb[IFA_MAX+1]; - struct net_device *dev; - struct dn_dev *dn_db; - struct ifaddrmsg *ifm; - struct dn_ifaddr *ifa; - int err; - - if (!netlink_capable(skb, CAP_NET_ADMIN)) - return -EPERM; - - if (!net_eq(net, &init_net)) - return -EINVAL; - - err = nlmsg_parse_deprecated(nlh, sizeof(*ifm), tb, IFA_MAX, - dn_ifa_policy, extack); - if (err < 0) - return err; - - if (tb[IFA_LOCAL] == NULL) - return -EINVAL; - - ifm = nlmsg_data(nlh); - if ((dev = __dev_get_by_index(&init_net, ifm->ifa_index)) == NULL) - return -ENODEV; - - if ((dn_db = rtnl_dereference(dev->dn_ptr)) == NULL) { - dn_db = dn_dev_create(dev, &err); - if (!dn_db) - return err; - } - - if ((ifa = dn_dev_alloc_ifa()) == NULL) - return -ENOBUFS; - - if (tb[IFA_ADDRESS] == NULL) - tb[IFA_ADDRESS] = tb[IFA_LOCAL]; - - ifa->ifa_local = nla_get_le16(tb[IFA_LOCAL]); - ifa->ifa_address = nla_get_le16(tb[IFA_ADDRESS]); - ifa->ifa_flags = tb[IFA_FLAGS] ? nla_get_u32(tb[IFA_FLAGS]) : - ifm->ifa_flags; - ifa->ifa_scope = ifm->ifa_scope; - ifa->ifa_dev = dn_db; - - if (tb[IFA_LABEL]) - nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ); - else - memcpy(ifa->ifa_label, dev->name, IFNAMSIZ); - - err = dn_dev_insert_ifa(dn_db, ifa); - if (err) - dn_dev_free_ifa(ifa); - - return err; -} - -static inline size_t dn_ifaddr_nlmsg_size(void) -{ - return NLMSG_ALIGN(sizeof(struct ifaddrmsg)) - + nla_total_size(IFNAMSIZ) /* IFA_LABEL */ - + nla_total_size(2) /* IFA_ADDRESS */ - + nla_total_size(2) /* IFA_LOCAL */ - + nla_total_size(4); /* IFA_FLAGS */ -} - -static int dn_nl_fill_ifaddr(struct sk_buff *skb, struct dn_ifaddr *ifa, - u32 portid, u32 seq, int event, unsigned int flags) -{ - struct ifaddrmsg *ifm; - struct nlmsghdr *nlh; - u32 ifa_flags = ifa->ifa_flags | IFA_F_PERMANENT; - - nlh = nlmsg_put(skb, portid, seq, event, sizeof(*ifm), flags); - if (nlh == NULL) - return -EMSGSIZE; - - ifm = nlmsg_data(nlh); - ifm->ifa_family = AF_DECnet; - ifm->ifa_prefixlen = 16; - ifm->ifa_flags = ifa_flags; - ifm->ifa_scope = ifa->ifa_scope; - ifm->ifa_index = ifa->ifa_dev->dev->ifindex; - - if ((ifa->ifa_address && - nla_put_le16(skb, IFA_ADDRESS, ifa->ifa_address)) || - (ifa->ifa_local && - nla_put_le16(skb, IFA_LOCAL, ifa->ifa_local)) || - (ifa->ifa_label[0] && - nla_put_string(skb, IFA_LABEL, ifa->ifa_label)) || - nla_put_u32(skb, IFA_FLAGS, ifa_flags)) - goto nla_put_failure; - nlmsg_end(skb, nlh); - return 0; - -nla_put_failure: - nlmsg_cancel(skb, nlh); - return -EMSGSIZE; -} - -static void dn_ifaddr_notify(int event, struct dn_ifaddr *ifa) -{ - struct sk_buff *skb; - int err = -ENOBUFS; - - skb = alloc_skb(dn_ifaddr_nlmsg_size(), GFP_KERNEL); - if (skb == NULL) - goto errout; - - err = dn_nl_fill_ifaddr(skb, ifa, 0, 0, event, 0); - if (err < 0) { - /* -EMSGSIZE implies BUG in dn_ifaddr_nlmsg_size() */ - WARN_ON(err == -EMSGSIZE); - kfree_skb(skb); - goto errout; - } - rtnl_notify(skb, &init_net, 0, RTNLGRP_DECnet_IFADDR, NULL, GFP_KERNEL); - return; -errout: - if (err < 0) - rtnl_set_sk_err(&init_net, RTNLGRP_DECnet_IFADDR, err); -} - -static int dn_nl_dump_ifaddr(struct sk_buff *skb, struct netlink_callback *cb) -{ - struct net *net = sock_net(skb->sk); - int idx, dn_idx = 0, skip_ndevs, skip_naddr; - struct net_device *dev; - struct dn_dev *dn_db; - struct dn_ifaddr *ifa; - - if (!net_eq(net, &init_net)) - return 0; - - skip_ndevs = cb->args[0]; - skip_naddr = cb->args[1]; - - idx = 0; - rcu_read_lock(); - for_each_netdev_rcu(&init_net, dev) { - if (idx < skip_ndevs) - goto cont; - else if (idx > skip_ndevs) { - /* Only skip over addresses for first dev dumped - * in this iteration (idx == skip_ndevs) */ - skip_naddr = 0; - } - - if ((dn_db = rcu_dereference(dev->dn_ptr)) == NULL) - goto cont; - - for (ifa = rcu_dereference(dn_db->ifa_list), dn_idx = 0; ifa; - ifa = rcu_dereference(ifa->ifa_next), dn_idx++) { - if (dn_idx < skip_naddr) - continue; - - if (dn_nl_fill_ifaddr(skb, ifa, NETLINK_CB(cb->skb).portid, - cb->nlh->nlmsg_seq, RTM_NEWADDR, - NLM_F_MULTI) < 0) - goto done; - } -cont: - idx++; - } -done: - rcu_read_unlock(); - cb->args[0] = idx; - cb->args[1] = dn_idx; - - return skb->len; -} - -static int dn_dev_get_first(struct net_device *dev, __le16 *addr) -{ - struct dn_dev *dn_db; - struct dn_ifaddr *ifa; - int rv = -ENODEV; - - rcu_read_lock(); - dn_db = rcu_dereference(dev->dn_ptr); - if (dn_db == NULL) - goto out; - - ifa = rcu_dereference(dn_db->ifa_list); - if (ifa != NULL) { - *addr = ifa->ifa_local; - rv = 0; - } -out: - rcu_read_unlock(); - return rv; -} - -/* - * Find a default address to bind to. - * - * This is one of those areas where the initial VMS concepts don't really - * map onto the Linux concepts, and since we introduced multiple addresses - * per interface we have to cope with slightly odd ways of finding out what - * "our address" really is. Mostly it's not a problem; for this we just guess - * a sensible default. Eventually the routing code will take care of all the - * nasties for us I hope. - */ -int dn_dev_bind_default(__le16 *addr) -{ - struct net_device *dev; - int rv; - dev = dn_dev_get_default(); -last_chance: - if (dev) { - rv = dn_dev_get_first(dev, addr); - dev_put(dev); - if (rv == 0 || dev == init_net.loopback_dev) - return rv; - } - dev = init_net.loopback_dev; - dev_hold(dev); - goto last_chance; -} - -static void dn_send_endnode_hello(struct net_device *dev, struct dn_ifaddr *ifa) -{ - struct endnode_hello_message *msg; - struct sk_buff *skb = NULL; - __le16 *pktlen; - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - - if ((skb = dn_alloc_skb(NULL, sizeof(*msg), GFP_ATOMIC)) == NULL) - return; - - skb->dev = dev; - - msg = skb_put(skb, sizeof(*msg)); - - msg->msgflg = 0x0D; - memcpy(msg->tiver, dn_eco_version, 3); - dn_dn2eth(msg->id, ifa->ifa_local); - msg->iinfo = DN_RT_INFO_ENDN; - msg->blksize = cpu_to_le16(mtu2blksize(dev)); - msg->area = 0x00; - memset(msg->seed, 0, 8); - memcpy(msg->neighbor, dn_hiord, ETH_ALEN); - - if (dn_db->router) { - struct dn_neigh *dn = (struct dn_neigh *)dn_db->router; - dn_dn2eth(msg->neighbor, dn->addr); - } - - msg->timer = cpu_to_le16((unsigned short)dn_db->parms.t3); - msg->mpd = 0x00; - msg->datalen = 0x02; - memset(msg->data, 0xAA, 2); - - pktlen = skb_push(skb, 2); - *pktlen = cpu_to_le16(skb->len - 2); - - skb_reset_network_header(skb); - - dn_rt_finish_output(skb, dn_rt_all_rt_mcast, msg->id); -} - - -#define DRDELAY (5 * HZ) - -static int dn_am_i_a_router(struct dn_neigh *dn, struct dn_dev *dn_db, struct dn_ifaddr *ifa) -{ - /* First check time since device went up */ - if (time_before(jiffies, dn_db->uptime + DRDELAY)) - return 0; - - /* If there is no router, then yes... */ - if (!dn_db->router) - return 1; - - /* otherwise only if we have a higher priority or.. */ - if (dn->priority < dn_db->parms.priority) - return 1; - - /* if we have equal priority and a higher node number */ - if (dn->priority != dn_db->parms.priority) - return 0; - - if (le16_to_cpu(dn->addr) < le16_to_cpu(ifa->ifa_local)) - return 1; - - return 0; -} - -static void dn_send_router_hello(struct net_device *dev, struct dn_ifaddr *ifa) -{ - int n; - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - struct dn_neigh *dn = (struct dn_neigh *)dn_db->router; - struct sk_buff *skb; - size_t size; - unsigned char *ptr; - unsigned char *i1, *i2; - __le16 *pktlen; - char *src; - - if (mtu2blksize(dev) < (26 + 7)) - return; - - n = mtu2blksize(dev) - 26; - n /= 7; - - if (n > 32) - n = 32; - - size = 2 + 26 + 7 * n; - - if ((skb = dn_alloc_skb(NULL, size, GFP_ATOMIC)) == NULL) - return; - - skb->dev = dev; - ptr = skb_put(skb, size); - - *ptr++ = DN_RT_PKT_CNTL | DN_RT_PKT_ERTH; - *ptr++ = 2; /* ECO */ - *ptr++ = 0; - *ptr++ = 0; - dn_dn2eth(ptr, ifa->ifa_local); - src = ptr; - ptr += ETH_ALEN; - *ptr++ = dn_db->parms.forwarding == 1 ? - DN_RT_INFO_L1RT : DN_RT_INFO_L2RT; - *((__le16 *)ptr) = cpu_to_le16(mtu2blksize(dev)); - ptr += 2; - *ptr++ = dn_db->parms.priority; /* Priority */ - *ptr++ = 0; /* Area: Reserved */ - *((__le16 *)ptr) = cpu_to_le16((unsigned short)dn_db->parms.t3); - ptr += 2; - *ptr++ = 0; /* MPD: Reserved */ - i1 = ptr++; - memset(ptr, 0, 7); /* Name: Reserved */ - ptr += 7; - i2 = ptr++; - - n = dn_neigh_elist(dev, ptr, n); - - *i2 = 7 * n; - *i1 = 8 + *i2; - - skb_trim(skb, (27 + *i2)); - - pktlen = skb_push(skb, 2); - *pktlen = cpu_to_le16(skb->len - 2); - - skb_reset_network_header(skb); - - if (dn_am_i_a_router(dn, dn_db, ifa)) { - struct sk_buff *skb2 = skb_copy(skb, GFP_ATOMIC); - if (skb2) { - dn_rt_finish_output(skb2, dn_rt_all_end_mcast, src); - } - } - - dn_rt_finish_output(skb, dn_rt_all_rt_mcast, src); -} - -static void dn_send_brd_hello(struct net_device *dev, struct dn_ifaddr *ifa) -{ - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - - if (dn_db->parms.forwarding == 0) - dn_send_endnode_hello(dev, ifa); - else - dn_send_router_hello(dev, ifa); -} - -static void dn_send_ptp_hello(struct net_device *dev, struct dn_ifaddr *ifa) -{ - int tdlen = 16; - int size = dev->hard_header_len + 2 + 4 + tdlen; - struct sk_buff *skb = dn_alloc_skb(NULL, size, GFP_ATOMIC); - int i; - unsigned char *ptr; - char src[ETH_ALEN]; - - if (skb == NULL) - return ; - - skb->dev = dev; - skb_push(skb, dev->hard_header_len); - ptr = skb_put(skb, 2 + 4 + tdlen); - - *ptr++ = DN_RT_PKT_HELO; - *((__le16 *)ptr) = ifa->ifa_local; - ptr += 2; - *ptr++ = tdlen; - - for(i = 0; i < tdlen; i++) - *ptr++ = 0252; - - dn_dn2eth(src, ifa->ifa_local); - dn_rt_finish_output(skb, dn_rt_all_rt_mcast, src); -} - -static int dn_eth_up(struct net_device *dev) -{ - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - - if (dn_db->parms.forwarding == 0) - dev_mc_add(dev, dn_rt_all_end_mcast); - else - dev_mc_add(dev, dn_rt_all_rt_mcast); - - dn_db->use_long = 1; - - return 0; -} - -static void dn_eth_down(struct net_device *dev) -{ - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - - if (dn_db->parms.forwarding == 0) - dev_mc_del(dev, dn_rt_all_end_mcast); - else - dev_mc_del(dev, dn_rt_all_rt_mcast); -} - -static void dn_dev_set_timer(struct net_device *dev); - -static void dn_dev_timer_func(struct timer_list *t) -{ - struct dn_dev *dn_db = from_timer(dn_db, t, timer); - struct net_device *dev; - struct dn_ifaddr *ifa; - - rcu_read_lock(); - dev = dn_db->dev; - if (dn_db->t3 <= dn_db->parms.t2) { - if (dn_db->parms.timer3) { - for (ifa = rcu_dereference(dn_db->ifa_list); - ifa; - ifa = rcu_dereference(ifa->ifa_next)) { - if (!(ifa->ifa_flags & IFA_F_SECONDARY)) - dn_db->parms.timer3(dev, ifa); - } - } - dn_db->t3 = dn_db->parms.t3; - } else { - dn_db->t3 -= dn_db->parms.t2; - } - rcu_read_unlock(); - dn_dev_set_timer(dev); -} - -static void dn_dev_set_timer(struct net_device *dev) -{ - struct dn_dev *dn_db = rcu_dereference_raw(dev->dn_ptr); - - if (dn_db->parms.t2 > dn_db->parms.t3) - dn_db->parms.t2 = dn_db->parms.t3; - - dn_db->timer.expires = jiffies + (dn_db->parms.t2 * HZ); - - add_timer(&dn_db->timer); -} - -static struct dn_dev *dn_dev_create(struct net_device *dev, int *err) -{ - int i; - struct dn_dev_parms *p = dn_dev_list; - struct dn_dev *dn_db; - - for(i = 0; i < DN_DEV_LIST_SIZE; i++, p++) { - if (p->type == dev->type) - break; - } - - *err = -ENODEV; - if (i == DN_DEV_LIST_SIZE) - return NULL; - - *err = -ENOBUFS; - if ((dn_db = kzalloc(sizeof(struct dn_dev), GFP_ATOMIC)) == NULL) - return NULL; - - memcpy(&dn_db->parms, p, sizeof(struct dn_dev_parms)); - - rcu_assign_pointer(dev->dn_ptr, dn_db); - dn_db->dev = dev; - timer_setup(&dn_db->timer, dn_dev_timer_func, 0); - - dn_db->uptime = jiffies; - - dn_db->neigh_parms = neigh_parms_alloc(dev, &dn_neigh_table); - if (!dn_db->neigh_parms) { - RCU_INIT_POINTER(dev->dn_ptr, NULL); - kfree(dn_db); - return NULL; - } - - if (dn_db->parms.up) { - if (dn_db->parms.up(dev) < 0) { - neigh_parms_release(&dn_neigh_table, dn_db->neigh_parms); - dev->dn_ptr = NULL; - kfree(dn_db); - return NULL; - } - } - - dn_dev_sysctl_register(dev, &dn_db->parms); - - dn_dev_set_timer(dev); - - *err = 0; - return dn_db; -} - - -/* - * This processes a device up event. We only start up - * the loopback device & ethernet devices with correct - * MAC addresses automatically. Others must be started - * specifically. - * - * FIXME: How should we configure the loopback address ? If we could dispense - * with using decnet_address here and for autobind, it will be one less thing - * for users to worry about setting up. - */ - -void dn_dev_up(struct net_device *dev) -{ - struct dn_ifaddr *ifa; - __le16 addr = decnet_address; - int maybe_default = 0; - struct dn_dev *dn_db = rtnl_dereference(dev->dn_ptr); - - if ((dev->type != ARPHRD_ETHER) && (dev->type != ARPHRD_LOOPBACK)) - return; - - /* - * Need to ensure that loopback device has a dn_db attached to it - * to allow creation of neighbours against it, even though it might - * not have a local address of its own. Might as well do the same for - * all autoconfigured interfaces. - */ - if (dn_db == NULL) { - int err; - dn_db = dn_dev_create(dev, &err); - if (dn_db == NULL) - return; - } - - if (dev->type == ARPHRD_ETHER) { - if (memcmp(dev->dev_addr, dn_hiord, 4) != 0) - return; - addr = dn_eth2dn(dev->dev_addr); - maybe_default = 1; - } - - if (addr == 0) - return; - - if ((ifa = dn_dev_alloc_ifa()) == NULL) - return; - - ifa->ifa_local = ifa->ifa_address = addr; - ifa->ifa_flags = 0; - ifa->ifa_scope = RT_SCOPE_UNIVERSE; - strcpy(ifa->ifa_label, dev->name); - - dn_dev_set_ifa(dev, ifa); - - /* - * Automagically set the default device to the first automatically - * configured ethernet card in the system. - */ - if (maybe_default) { - dev_hold(dev); - if (dn_dev_set_default(dev, 0)) - dev_put(dev); - } -} - -static void dn_dev_delete(struct net_device *dev) -{ - struct dn_dev *dn_db = rtnl_dereference(dev->dn_ptr); - - if (dn_db == NULL) - return; - - del_timer_sync(&dn_db->timer); - dn_dev_sysctl_unregister(&dn_db->parms); - dn_dev_check_default(dev); - neigh_ifdown(&dn_neigh_table, dev); - - if (dn_db->parms.down) - dn_db->parms.down(dev); - - dev->dn_ptr = NULL; - - neigh_parms_release(&dn_neigh_table, dn_db->neigh_parms); - neigh_ifdown(&dn_neigh_table, dev); - - if (dn_db->router) - neigh_release(dn_db->router); - if (dn_db->peer) - neigh_release(dn_db->peer); - - kfree(dn_db); -} - -void dn_dev_down(struct net_device *dev) -{ - struct dn_dev *dn_db = rtnl_dereference(dev->dn_ptr); - struct dn_ifaddr *ifa; - - if (dn_db == NULL) - return; - - while ((ifa = rtnl_dereference(dn_db->ifa_list)) != NULL) { - dn_dev_del_ifa(dn_db, &dn_db->ifa_list, 0); - dn_dev_free_ifa(ifa); - } - - dn_dev_delete(dev); -} - -void dn_dev_init_pkt(struct sk_buff *skb) -{ -} - -void dn_dev_veri_pkt(struct sk_buff *skb) -{ -} - -void dn_dev_hello(struct sk_buff *skb) -{ -} - -void dn_dev_devices_off(void) -{ - struct net_device *dev; - - rtnl_lock(); - for_each_netdev(&init_net, dev) - dn_dev_down(dev); - rtnl_unlock(); - -} - -void dn_dev_devices_on(void) -{ - struct net_device *dev; - - rtnl_lock(); - for_each_netdev(&init_net, dev) { - if (dev->flags & IFF_UP) - dn_dev_up(dev); - } - rtnl_unlock(); -} - -int register_dnaddr_notifier(struct notifier_block *nb) -{ - return blocking_notifier_chain_register(&dnaddr_chain, nb); -} - -int unregister_dnaddr_notifier(struct notifier_block *nb) -{ - return blocking_notifier_chain_unregister(&dnaddr_chain, nb); -} - -#ifdef CONFIG_PROC_FS -static inline int is_dn_dev(struct net_device *dev) -{ - return dev->dn_ptr != NULL; -} - -static void *dn_dev_seq_start(struct seq_file *seq, loff_t *pos) - __acquires(RCU) -{ - int i; - struct net_device *dev; - - rcu_read_lock(); - - if (*pos == 0) - return SEQ_START_TOKEN; - - i = 1; - for_each_netdev_rcu(&init_net, dev) { - if (!is_dn_dev(dev)) - continue; - - if (i++ == *pos) - return dev; - } - - return NULL; -} - -static void *dn_dev_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct net_device *dev; - - ++*pos; - - dev = v; - if (v == SEQ_START_TOKEN) - dev = net_device_entry(&init_net.dev_base_head); - - for_each_netdev_continue_rcu(&init_net, dev) { - if (!is_dn_dev(dev)) - continue; - - return dev; - } - - return NULL; -} - -static void dn_dev_seq_stop(struct seq_file *seq, void *v) - __releases(RCU) -{ - rcu_read_unlock(); -} - -static char *dn_type2asc(char type) -{ - switch (type) { - case DN_DEV_BCAST: - return "B"; - case DN_DEV_UCAST: - return "U"; - case DN_DEV_MPOINT: - return "M"; - } - - return "?"; -} - -static int dn_dev_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) - seq_puts(seq, "Name Flags T1 Timer1 T3 Timer3 BlkSize Pri State DevType Router Peer\n"); - else { - struct net_device *dev = v; - char peer_buf[DN_ASCBUF_LEN]; - char router_buf[DN_ASCBUF_LEN]; - struct dn_dev *dn_db = rcu_dereference(dev->dn_ptr); - - seq_printf(seq, "%-8s %1s %04u %04u %04lu %04lu" - " %04hu %03d %02x %-10s %-7s %-7s\n", - dev->name, - dn_type2asc(dn_db->parms.mode), - 0, 0, - dn_db->t3, dn_db->parms.t3, - mtu2blksize(dev), - dn_db->parms.priority, - dn_db->parms.state, dn_db->parms.name, - dn_db->router ? dn_addr2asc(le16_to_cpu(*(__le16 *)dn_db->router->primary_key), router_buf) : "", - dn_db->peer ? dn_addr2asc(le16_to_cpu(*(__le16 *)dn_db->peer->primary_key), peer_buf) : ""); - } - return 0; -} - -static const struct seq_operations dn_dev_seq_ops = { - .start = dn_dev_seq_start, - .next = dn_dev_seq_next, - .stop = dn_dev_seq_stop, - .show = dn_dev_seq_show, -}; -#endif /* CONFIG_PROC_FS */ - -static int addr[2]; -module_param_array(addr, int, NULL, 0444); -MODULE_PARM_DESC(addr, "The DECnet address of this machine: area,node"); - -void __init dn_dev_init(void) -{ - if (addr[0] > 63 || addr[0] < 0) { - printk(KERN_ERR "DECnet: Area must be between 0 and 63"); - return; - } - - if (addr[1] > 1023 || addr[1] < 0) { - printk(KERN_ERR "DECnet: Node must be between 0 and 1023"); - return; - } - - decnet_address = cpu_to_le16((addr[0] << 10) | addr[1]); - - dn_dev_devices_on(); - - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_NEWADDR, - dn_nl_newaddr, NULL, 0); - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_DELADDR, - dn_nl_deladdr, NULL, 0); - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_GETADDR, - NULL, dn_nl_dump_ifaddr, 0); - - proc_create_seq("decnet_dev", 0444, init_net.proc_net, &dn_dev_seq_ops); - -#ifdef CONFIG_SYSCTL - { - int i; - for(i = 0; i < DN_DEV_LIST_SIZE; i++) - dn_dev_sysctl_register(NULL, &dn_dev_list[i]); - } -#endif /* CONFIG_SYSCTL */ -} - -void __exit dn_dev_cleanup(void) -{ -#ifdef CONFIG_SYSCTL - { - int i; - for(i = 0; i < DN_DEV_LIST_SIZE; i++) - dn_dev_sysctl_unregister(&dn_dev_list[i]); - } -#endif /* CONFIG_SYSCTL */ - - remove_proc_entry("decnet_dev", init_net.proc_net); - - dn_dev_devices_off(); -} diff --git a/net/decnet/dn_fib.c b/net/decnet/dn_fib.c deleted file mode 100644 index 77fbf8e9df4b..000000000000 --- a/net/decnet/dn_fib.c +++ /dev/null @@ -1,799 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Routing Forwarding Information Base (Glue/Info List) - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * - * - * Changes: - * Alexey Kuznetsov : SMP locking changes - * Steve Whitehouse : Rewrote it... Well to be more correct, I - * copied most of it from the ipv4 fib code. - * Steve Whitehouse : Updated it in style and fixed a few bugs - * which were fixed in the ipv4 code since - * this code was copied from it. - * - */ -#include <linux/string.h> -#include <linux/net.h> -#include <linux/socket.h> -#include <linux/slab.h> -#include <linux/sockios.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/netlink.h> -#include <linux/rtnetlink.h> -#include <linux/proc_fs.h> -#include <linux/netdevice.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/atomic.h> -#include <linux/uaccess.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/fib_rules.h> -#include <net/dn.h> -#include <net/dn_route.h> -#include <net/dn_fib.h> -#include <net/dn_neigh.h> -#include <net/dn_dev.h> -#include <net/rtnh.h> - -#define RT_MIN_TABLE 1 - -#define for_fib_info() { struct dn_fib_info *fi;\ - for(fi = dn_fib_info_list; fi; fi = fi->fib_next) -#define endfor_fib_info() } - -#define for_nexthops(fi) { int nhsel; const struct dn_fib_nh *nh;\ - for(nhsel = 0, nh = (fi)->fib_nh; nhsel < (fi)->fib_nhs; nh++, nhsel++) - -#define change_nexthops(fi) { int nhsel; struct dn_fib_nh *nh;\ - for(nhsel = 0, nh = (struct dn_fib_nh *)((fi)->fib_nh); nhsel < (fi)->fib_nhs; nh++, nhsel++) - -#define endfor_nexthops(fi) } - -static DEFINE_SPINLOCK(dn_fib_multipath_lock); -static struct dn_fib_info *dn_fib_info_list; -static DEFINE_SPINLOCK(dn_fib_info_lock); - -static struct -{ - int error; - u8 scope; -} dn_fib_props[RTN_MAX+1] = { - [RTN_UNSPEC] = { .error = 0, .scope = RT_SCOPE_NOWHERE }, - [RTN_UNICAST] = { .error = 0, .scope = RT_SCOPE_UNIVERSE }, - [RTN_LOCAL] = { .error = 0, .scope = RT_SCOPE_HOST }, - [RTN_BROADCAST] = { .error = -EINVAL, .scope = RT_SCOPE_NOWHERE }, - [RTN_ANYCAST] = { .error = -EINVAL, .scope = RT_SCOPE_NOWHERE }, - [RTN_MULTICAST] = { .error = -EINVAL, .scope = RT_SCOPE_NOWHERE }, - [RTN_BLACKHOLE] = { .error = -EINVAL, .scope = RT_SCOPE_UNIVERSE }, - [RTN_UNREACHABLE] = { .error = -EHOSTUNREACH, .scope = RT_SCOPE_UNIVERSE }, - [RTN_PROHIBIT] = { .error = -EACCES, .scope = RT_SCOPE_UNIVERSE }, - [RTN_THROW] = { .error = -EAGAIN, .scope = RT_SCOPE_UNIVERSE }, - [RTN_NAT] = { .error = 0, .scope = RT_SCOPE_NOWHERE }, - [RTN_XRESOLVE] = { .error = -EINVAL, .scope = RT_SCOPE_NOWHERE }, -}; - -static int dn_fib_sync_down(__le16 local, struct net_device *dev, int force); -static int dn_fib_sync_up(struct net_device *dev); - -void dn_fib_free_info(struct dn_fib_info *fi) -{ - if (fi->fib_dead == 0) { - printk(KERN_DEBUG "DECnet: BUG! Attempt to free alive dn_fib_info\n"); - return; - } - - change_nexthops(fi) { - if (nh->nh_dev) - dev_put(nh->nh_dev); - nh->nh_dev = NULL; - } endfor_nexthops(fi); - kfree(fi); -} - -void dn_fib_release_info(struct dn_fib_info *fi) -{ - spin_lock(&dn_fib_info_lock); - if (fi && --fi->fib_treeref == 0) { - if (fi->fib_next) - fi->fib_next->fib_prev = fi->fib_prev; - if (fi->fib_prev) - fi->fib_prev->fib_next = fi->fib_next; - if (fi == dn_fib_info_list) - dn_fib_info_list = fi->fib_next; - fi->fib_dead = 1; - dn_fib_info_put(fi); - } - spin_unlock(&dn_fib_info_lock); -} - -static inline int dn_fib_nh_comp(const struct dn_fib_info *fi, const struct dn_fib_info *ofi) -{ - const struct dn_fib_nh *onh = ofi->fib_nh; - - for_nexthops(fi) { - if (nh->nh_oif != onh->nh_oif || - nh->nh_gw != onh->nh_gw || - nh->nh_scope != onh->nh_scope || - nh->nh_weight != onh->nh_weight || - ((nh->nh_flags^onh->nh_flags)&~RTNH_F_DEAD)) - return -1; - onh++; - } endfor_nexthops(fi); - return 0; -} - -static inline struct dn_fib_info *dn_fib_find_info(const struct dn_fib_info *nfi) -{ - for_fib_info() { - if (fi->fib_nhs != nfi->fib_nhs) - continue; - if (nfi->fib_protocol == fi->fib_protocol && - nfi->fib_prefsrc == fi->fib_prefsrc && - nfi->fib_priority == fi->fib_priority && - memcmp(nfi->fib_metrics, fi->fib_metrics, sizeof(fi->fib_metrics)) == 0 && - ((nfi->fib_flags^fi->fib_flags)&~RTNH_F_DEAD) == 0 && - (nfi->fib_nhs == 0 || dn_fib_nh_comp(fi, nfi) == 0)) - return fi; - } endfor_fib_info(); - return NULL; -} - -static int dn_fib_count_nhs(const struct nlattr *attr) -{ - struct rtnexthop *nhp = nla_data(attr); - int nhs = 0, nhlen = nla_len(attr); - - while (rtnh_ok(nhp, nhlen)) { - nhs++; - nhp = rtnh_next(nhp, &nhlen); - } - - /* leftover implies invalid nexthop configuration, discard it */ - return nhlen > 0 ? 0 : nhs; -} - -static int dn_fib_get_nhs(struct dn_fib_info *fi, const struct nlattr *attr, - const struct rtmsg *r) -{ - struct rtnexthop *nhp = nla_data(attr); - int nhlen = nla_len(attr); - - change_nexthops(fi) { - int attrlen; - - if (!rtnh_ok(nhp, nhlen)) - return -EINVAL; - - nh->nh_flags = (r->rtm_flags&~0xFF) | nhp->rtnh_flags; - nh->nh_oif = nhp->rtnh_ifindex; - nh->nh_weight = nhp->rtnh_hops + 1; - - attrlen = rtnh_attrlen(nhp); - if (attrlen > 0) { - struct nlattr *gw_attr; - - gw_attr = nla_find((struct nlattr *) (nhp + 1), attrlen, RTA_GATEWAY); - nh->nh_gw = gw_attr ? nla_get_le16(gw_attr) : 0; - } - - nhp = rtnh_next(nhp, &nhlen); - } endfor_nexthops(fi); - - return 0; -} - - -static int dn_fib_check_nh(const struct rtmsg *r, struct dn_fib_info *fi, struct dn_fib_nh *nh) -{ - int err; - - if (nh->nh_gw) { - struct flowidn fld; - struct dn_fib_res res; - - if (nh->nh_flags&RTNH_F_ONLINK) { - struct net_device *dev; - - if (r->rtm_scope >= RT_SCOPE_LINK) - return -EINVAL; - if (dnet_addr_type(nh->nh_gw) != RTN_UNICAST) - return -EINVAL; - if ((dev = __dev_get_by_index(&init_net, nh->nh_oif)) == NULL) - return -ENODEV; - if (!(dev->flags&IFF_UP)) - return -ENETDOWN; - nh->nh_dev = dev; - dev_hold(dev); - nh->nh_scope = RT_SCOPE_LINK; - return 0; - } - - memset(&fld, 0, sizeof(fld)); - fld.daddr = nh->nh_gw; - fld.flowidn_oif = nh->nh_oif; - fld.flowidn_scope = r->rtm_scope + 1; - - if (fld.flowidn_scope < RT_SCOPE_LINK) - fld.flowidn_scope = RT_SCOPE_LINK; - - if ((err = dn_fib_lookup(&fld, &res)) != 0) - return err; - - err = -EINVAL; - if (res.type != RTN_UNICAST && res.type != RTN_LOCAL) - goto out; - nh->nh_scope = res.scope; - nh->nh_oif = DN_FIB_RES_OIF(res); - nh->nh_dev = DN_FIB_RES_DEV(res); - if (nh->nh_dev == NULL) - goto out; - dev_hold(nh->nh_dev); - err = -ENETDOWN; - if (!(nh->nh_dev->flags & IFF_UP)) - goto out; - err = 0; -out: - dn_fib_res_put(&res); - return err; - } else { - struct net_device *dev; - - if (nh->nh_flags&(RTNH_F_PERVASIVE|RTNH_F_ONLINK)) - return -EINVAL; - - dev = __dev_get_by_index(&init_net, nh->nh_oif); - if (dev == NULL || dev->dn_ptr == NULL) - return -ENODEV; - if (!(dev->flags&IFF_UP)) - return -ENETDOWN; - nh->nh_dev = dev; - dev_hold(nh->nh_dev); - nh->nh_scope = RT_SCOPE_HOST; - } - - return 0; -} - - -struct dn_fib_info *dn_fib_create_info(const struct rtmsg *r, struct nlattr *attrs[], - const struct nlmsghdr *nlh, int *errp) -{ - int err; - struct dn_fib_info *fi = NULL; - struct dn_fib_info *ofi; - int nhs = 1; - - if (r->rtm_type > RTN_MAX) - goto err_inval; - - if (dn_fib_props[r->rtm_type].scope > r->rtm_scope) - goto err_inval; - - if (attrs[RTA_MULTIPATH] && - (nhs = dn_fib_count_nhs(attrs[RTA_MULTIPATH])) == 0) - goto err_inval; - - fi = kzalloc(struct_size(fi, fib_nh, nhs), GFP_KERNEL); - err = -ENOBUFS; - if (fi == NULL) - goto failure; - - fi->fib_protocol = r->rtm_protocol; - fi->fib_nhs = nhs; - fi->fib_flags = r->rtm_flags; - - if (attrs[RTA_PRIORITY]) - fi->fib_priority = nla_get_u32(attrs[RTA_PRIORITY]); - - if (attrs[RTA_METRICS]) { - struct nlattr *attr; - int rem; - - nla_for_each_nested(attr, attrs[RTA_METRICS], rem) { - int type = nla_type(attr); - - if (type) { - if (type > RTAX_MAX || type == RTAX_CC_ALGO || - nla_len(attr) < 4) - goto err_inval; - - fi->fib_metrics[type-1] = nla_get_u32(attr); - } - } - } - - if (attrs[RTA_PREFSRC]) - fi->fib_prefsrc = nla_get_le16(attrs[RTA_PREFSRC]); - - if (attrs[RTA_MULTIPATH]) { - if ((err = dn_fib_get_nhs(fi, attrs[RTA_MULTIPATH], r)) != 0) - goto failure; - - if (attrs[RTA_OIF] && - fi->fib_nh->nh_oif != nla_get_u32(attrs[RTA_OIF])) - goto err_inval; - - if (attrs[RTA_GATEWAY] && - fi->fib_nh->nh_gw != nla_get_le16(attrs[RTA_GATEWAY])) - goto err_inval; - } else { - struct dn_fib_nh *nh = fi->fib_nh; - - if (attrs[RTA_OIF]) - nh->nh_oif = nla_get_u32(attrs[RTA_OIF]); - - if (attrs[RTA_GATEWAY]) - nh->nh_gw = nla_get_le16(attrs[RTA_GATEWAY]); - - nh->nh_flags = r->rtm_flags; - nh->nh_weight = 1; - } - - if (r->rtm_type == RTN_NAT) { - if (!attrs[RTA_GATEWAY] || nhs != 1 || attrs[RTA_OIF]) - goto err_inval; - - fi->fib_nh->nh_gw = nla_get_le16(attrs[RTA_GATEWAY]); - goto link_it; - } - - if (dn_fib_props[r->rtm_type].error) { - if (attrs[RTA_GATEWAY] || attrs[RTA_OIF] || attrs[RTA_MULTIPATH]) - goto err_inval; - - goto link_it; - } - - if (r->rtm_scope > RT_SCOPE_HOST) - goto err_inval; - - if (r->rtm_scope == RT_SCOPE_HOST) { - struct dn_fib_nh *nh = fi->fib_nh; - - /* Local address is added */ - if (nhs != 1 || nh->nh_gw) - goto err_inval; - nh->nh_scope = RT_SCOPE_NOWHERE; - nh->nh_dev = dev_get_by_index(&init_net, fi->fib_nh->nh_oif); - err = -ENODEV; - if (nh->nh_dev == NULL) - goto failure; - } else { - change_nexthops(fi) { - if ((err = dn_fib_check_nh(r, fi, nh)) != 0) - goto failure; - } endfor_nexthops(fi) - } - - if (fi->fib_prefsrc) { - if (r->rtm_type != RTN_LOCAL || !attrs[RTA_DST] || - fi->fib_prefsrc != nla_get_le16(attrs[RTA_DST])) - if (dnet_addr_type(fi->fib_prefsrc) != RTN_LOCAL) - goto err_inval; - } - -link_it: - if ((ofi = dn_fib_find_info(fi)) != NULL) { - fi->fib_dead = 1; - dn_fib_free_info(fi); - ofi->fib_treeref++; - return ofi; - } - - fi->fib_treeref++; - refcount_set(&fi->fib_clntref, 1); - spin_lock(&dn_fib_info_lock); - fi->fib_next = dn_fib_info_list; - fi->fib_prev = NULL; - if (dn_fib_info_list) - dn_fib_info_list->fib_prev = fi; - dn_fib_info_list = fi; - spin_unlock(&dn_fib_info_lock); - return fi; - -err_inval: - err = -EINVAL; - -failure: - *errp = err; - if (fi) { - fi->fib_dead = 1; - dn_fib_free_info(fi); - } - - return NULL; -} - -int dn_fib_semantic_match(int type, struct dn_fib_info *fi, const struct flowidn *fld, struct dn_fib_res *res) -{ - int err = dn_fib_props[type].error; - - if (err == 0) { - if (fi->fib_flags & RTNH_F_DEAD) - return 1; - - res->fi = fi; - - switch (type) { - case RTN_NAT: - DN_FIB_RES_RESET(*res); - refcount_inc(&fi->fib_clntref); - return 0; - case RTN_UNICAST: - case RTN_LOCAL: - for_nexthops(fi) { - if (nh->nh_flags & RTNH_F_DEAD) - continue; - if (!fld->flowidn_oif || - fld->flowidn_oif == nh->nh_oif) - break; - } - if (nhsel < fi->fib_nhs) { - res->nh_sel = nhsel; - refcount_inc(&fi->fib_clntref); - return 0; - } - endfor_nexthops(fi); - res->fi = NULL; - return 1; - default: - net_err_ratelimited("DECnet: impossible routing event : dn_fib_semantic_match type=%d\n", - type); - res->fi = NULL; - return -EINVAL; - } - } - return err; -} - -void dn_fib_select_multipath(const struct flowidn *fld, struct dn_fib_res *res) -{ - struct dn_fib_info *fi = res->fi; - int w; - - spin_lock_bh(&dn_fib_multipath_lock); - if (fi->fib_power <= 0) { - int power = 0; - change_nexthops(fi) { - if (!(nh->nh_flags&RTNH_F_DEAD)) { - power += nh->nh_weight; - nh->nh_power = nh->nh_weight; - } - } endfor_nexthops(fi); - fi->fib_power = power; - if (power < 0) { - spin_unlock_bh(&dn_fib_multipath_lock); - res->nh_sel = 0; - return; - } - } - - w = jiffies % fi->fib_power; - - change_nexthops(fi) { - if (!(nh->nh_flags&RTNH_F_DEAD) && nh->nh_power) { - if ((w -= nh->nh_power) <= 0) { - nh->nh_power--; - fi->fib_power--; - res->nh_sel = nhsel; - spin_unlock_bh(&dn_fib_multipath_lock); - return; - } - } - } endfor_nexthops(fi); - res->nh_sel = 0; - spin_unlock_bh(&dn_fib_multipath_lock); -} - -static inline u32 rtm_get_table(struct nlattr *attrs[], u8 table) -{ - if (attrs[RTA_TABLE]) - table = nla_get_u32(attrs[RTA_TABLE]); - - return table; -} - -static int dn_fib_rtm_delroute(struct sk_buff *skb, struct nlmsghdr *nlh, - struct netlink_ext_ack *extack) -{ - struct net *net = sock_net(skb->sk); - struct dn_fib_table *tb; - struct rtmsg *r = nlmsg_data(nlh); - struct nlattr *attrs[RTA_MAX+1]; - int err; - - if (!netlink_capable(skb, CAP_NET_ADMIN)) - return -EPERM; - - if (!net_eq(net, &init_net)) - return -EINVAL; - - err = nlmsg_parse_deprecated(nlh, sizeof(*r), attrs, RTA_MAX, - rtm_dn_policy, extack); - if (err < 0) - return err; - - tb = dn_fib_get_table(rtm_get_table(attrs, r->rtm_table), 0); - if (!tb) - return -ESRCH; - - return tb->delete(tb, r, attrs, nlh, &NETLINK_CB(skb)); -} - -static int dn_fib_rtm_newroute(struct sk_buff *skb, struct nlmsghdr *nlh, - struct netlink_ext_ack *extack) -{ - struct net *net = sock_net(skb->sk); - struct dn_fib_table *tb; - struct rtmsg *r = nlmsg_data(nlh); - struct nlattr *attrs[RTA_MAX+1]; - int err; - - if (!netlink_capable(skb, CAP_NET_ADMIN)) - return -EPERM; - - if (!net_eq(net, &init_net)) - return -EINVAL; - - err = nlmsg_parse_deprecated(nlh, sizeof(*r), attrs, RTA_MAX, - rtm_dn_policy, extack); - if (err < 0) - return err; - - tb = dn_fib_get_table(rtm_get_table(attrs, r->rtm_table), 1); - if (!tb) - return -ENOBUFS; - - return tb->insert(tb, r, attrs, nlh, &NETLINK_CB(skb)); -} - -static void fib_magic(int cmd, int type, __le16 dst, int dst_len, struct dn_ifaddr *ifa) -{ - struct dn_fib_table *tb; - struct { - struct nlmsghdr nlh; - struct rtmsg rtm; - } req; - struct { - struct nlattr hdr; - __le16 dst; - } dst_attr = { - .dst = dst, - }; - struct { - struct nlattr hdr; - __le16 prefsrc; - } prefsrc_attr = { - .prefsrc = ifa->ifa_local, - }; - struct { - struct nlattr hdr; - u32 oif; - } oif_attr = { - .oif = ifa->ifa_dev->dev->ifindex, - }; - struct nlattr *attrs[RTA_MAX+1] = { - [RTA_DST] = (struct nlattr *) &dst_attr, - [RTA_PREFSRC] = (struct nlattr * ) &prefsrc_attr, - [RTA_OIF] = (struct nlattr *) &oif_attr, - }; - - memset(&req.rtm, 0, sizeof(req.rtm)); - - if (type == RTN_UNICAST) - tb = dn_fib_get_table(RT_MIN_TABLE, 1); - else - tb = dn_fib_get_table(RT_TABLE_LOCAL, 1); - - if (tb == NULL) - return; - - req.nlh.nlmsg_len = sizeof(req); - req.nlh.nlmsg_type = cmd; - req.nlh.nlmsg_flags = NLM_F_REQUEST|NLM_F_CREATE|NLM_F_APPEND; - req.nlh.nlmsg_pid = 0; - req.nlh.nlmsg_seq = 0; - - req.rtm.rtm_dst_len = dst_len; - req.rtm.rtm_table = tb->n; - req.rtm.rtm_protocol = RTPROT_KERNEL; - req.rtm.rtm_scope = (type != RTN_LOCAL ? RT_SCOPE_LINK : RT_SCOPE_HOST); - req.rtm.rtm_type = type; - - if (cmd == RTM_NEWROUTE) - tb->insert(tb, &req.rtm, attrs, &req.nlh, NULL); - else - tb->delete(tb, &req.rtm, attrs, &req.nlh, NULL); -} - -static void dn_fib_add_ifaddr(struct dn_ifaddr *ifa) -{ - - fib_magic(RTM_NEWROUTE, RTN_LOCAL, ifa->ifa_local, 16, ifa); - -#if 0 - if (!(dev->flags&IFF_UP)) - return; - /* In the future, we will want to add default routes here */ - -#endif -} - -static void dn_fib_del_ifaddr(struct dn_ifaddr *ifa) -{ - int found_it = 0; - struct net_device *dev; - struct dn_dev *dn_db; - struct dn_ifaddr *ifa2; - - ASSERT_RTNL(); - - /* Scan device list */ - rcu_read_lock(); - for_each_netdev_rcu(&init_net, dev) { - dn_db = rcu_dereference(dev->dn_ptr); - if (dn_db == NULL) - continue; - for (ifa2 = rcu_dereference(dn_db->ifa_list); - ifa2 != NULL; - ifa2 = rcu_dereference(ifa2->ifa_next)) { - if (ifa2->ifa_local == ifa->ifa_local) { - found_it = 1; - break; - } - } - } - rcu_read_unlock(); - - if (found_it == 0) { - fib_magic(RTM_DELROUTE, RTN_LOCAL, ifa->ifa_local, 16, ifa); - - if (dnet_addr_type(ifa->ifa_local) != RTN_LOCAL) { - if (dn_fib_sync_down(ifa->ifa_local, NULL, 0)) - dn_fib_flush(); - } - } -} - -static void dn_fib_disable_addr(struct net_device *dev, int force) -{ - if (dn_fib_sync_down(0, dev, force)) - dn_fib_flush(); - dn_rt_cache_flush(0); - neigh_ifdown(&dn_neigh_table, dev); -} - -static int dn_fib_dnaddr_event(struct notifier_block *this, unsigned long event, void *ptr) -{ - struct dn_ifaddr *ifa = (struct dn_ifaddr *)ptr; - - switch (event) { - case NETDEV_UP: - dn_fib_add_ifaddr(ifa); - dn_fib_sync_up(ifa->ifa_dev->dev); - dn_rt_cache_flush(-1); - break; - case NETDEV_DOWN: - dn_fib_del_ifaddr(ifa); - if (ifa->ifa_dev && ifa->ifa_dev->ifa_list == NULL) { - dn_fib_disable_addr(ifa->ifa_dev->dev, 1); - } else { - dn_rt_cache_flush(-1); - } - break; - } - return NOTIFY_DONE; -} - -static int dn_fib_sync_down(__le16 local, struct net_device *dev, int force) -{ - int ret = 0; - int scope = RT_SCOPE_NOWHERE; - - if (force) - scope = -1; - - for_fib_info() { - /* - * This makes no sense for DECnet.... we will almost - * certainly have more than one local address the same - * over all our interfaces. It needs thinking about - * some more. - */ - if (local && fi->fib_prefsrc == local) { - fi->fib_flags |= RTNH_F_DEAD; - ret++; - } else if (dev && fi->fib_nhs) { - int dead = 0; - - change_nexthops(fi) { - if (nh->nh_flags&RTNH_F_DEAD) - dead++; - else if (nh->nh_dev == dev && - nh->nh_scope != scope) { - spin_lock_bh(&dn_fib_multipath_lock); - nh->nh_flags |= RTNH_F_DEAD; - fi->fib_power -= nh->nh_power; - nh->nh_power = 0; - spin_unlock_bh(&dn_fib_multipath_lock); - dead++; - } - } endfor_nexthops(fi) - if (dead == fi->fib_nhs) { - fi->fib_flags |= RTNH_F_DEAD; - ret++; - } - } - } endfor_fib_info(); - return ret; -} - - -static int dn_fib_sync_up(struct net_device *dev) -{ - int ret = 0; - - if (!(dev->flags&IFF_UP)) - return 0; - - for_fib_info() { - int alive = 0; - - change_nexthops(fi) { - if (!(nh->nh_flags&RTNH_F_DEAD)) { - alive++; - continue; - } - if (nh->nh_dev == NULL || !(nh->nh_dev->flags&IFF_UP)) - continue; - if (nh->nh_dev != dev || dev->dn_ptr == NULL) - continue; - alive++; - spin_lock_bh(&dn_fib_multipath_lock); - nh->nh_power = 0; - nh->nh_flags &= ~RTNH_F_DEAD; - spin_unlock_bh(&dn_fib_multipath_lock); - } endfor_nexthops(fi); - - if (alive > 0) { - fi->fib_flags &= ~RTNH_F_DEAD; - ret++; - } - } endfor_fib_info(); - return ret; -} - -static struct notifier_block dn_fib_dnaddr_notifier = { - .notifier_call = dn_fib_dnaddr_event, -}; - -void __exit dn_fib_cleanup(void) -{ - dn_fib_table_cleanup(); - dn_fib_rules_cleanup(); - - unregister_dnaddr_notifier(&dn_fib_dnaddr_notifier); -} - - -void __init dn_fib_init(void) -{ - dn_fib_table_init(); - dn_fib_rules_init(); - - register_dnaddr_notifier(&dn_fib_dnaddr_notifier); - - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_NEWROUTE, - dn_fib_rtm_newroute, NULL, 0); - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_DELROUTE, - dn_fib_rtm_delroute, NULL, 0); -} diff --git a/net/decnet/dn_neigh.c b/net/decnet/dn_neigh.c deleted file mode 100644 index 94b306f6d551..000000000000 --- a/net/decnet/dn_neigh.c +++ /dev/null @@ -1,605 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Neighbour Functions (Adjacency Database and - * On-Ethernet Cache) - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * - * - * Changes: - * Steve Whitehouse : Fixed router listing routine - * Steve Whitehouse : Added error_report functions - * Steve Whitehouse : Added default router detection - * Steve Whitehouse : Hop counts in outgoing messages - * Steve Whitehouse : Fixed src/dst in outgoing messages so - * forwarding now stands a good chance of - * working. - * Steve Whitehouse : Fixed neighbour states (for now anyway). - * Steve Whitehouse : Made error_report functions dummies. This - * is not the right place to return skbs. - * Steve Whitehouse : Convert to seq_file - * - */ - -#include <linux/net.h> -#include <linux/module.h> -#include <linux/socket.h> -#include <linux/if_arp.h> -#include <linux/slab.h> -#include <linux/if_ether.h> -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/string.h> -#include <linux/netfilter_decnet.h> -#include <linux/spinlock.h> -#include <linux/seq_file.h> -#include <linux/rcupdate.h> -#include <linux/jhash.h> -#include <linux/atomic.h> -#include <net/net_namespace.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/dn.h> -#include <net/dn_dev.h> -#include <net/dn_neigh.h> -#include <net/dn_route.h> - -static int dn_neigh_construct(struct neighbour *); -static void dn_neigh_error_report(struct neighbour *, struct sk_buff *); -static int dn_neigh_output(struct neighbour *neigh, struct sk_buff *skb); - -/* - * Operations for adding the link layer header. - */ -static const struct neigh_ops dn_neigh_ops = { - .family = AF_DECnet, - .error_report = dn_neigh_error_report, - .output = dn_neigh_output, - .connected_output = dn_neigh_output, -}; - -static u32 dn_neigh_hash(const void *pkey, - const struct net_device *dev, - __u32 *hash_rnd) -{ - return jhash_2words(*(__u16 *)pkey, 0, hash_rnd[0]); -} - -static bool dn_key_eq(const struct neighbour *neigh, const void *pkey) -{ - return neigh_key_eq16(neigh, pkey); -} - -struct neigh_table dn_neigh_table = { - .family = PF_DECnet, - .entry_size = NEIGH_ENTRY_SIZE(sizeof(struct dn_neigh)), - .key_len = sizeof(__le16), - .protocol = cpu_to_be16(ETH_P_DNA_RT), - .hash = dn_neigh_hash, - .key_eq = dn_key_eq, - .constructor = dn_neigh_construct, - .id = "dn_neigh_cache", - .parms ={ - .tbl = &dn_neigh_table, - .reachable_time = 30 * HZ, - .data = { - [NEIGH_VAR_MCAST_PROBES] = 0, - [NEIGH_VAR_UCAST_PROBES] = 0, - [NEIGH_VAR_APP_PROBES] = 0, - [NEIGH_VAR_RETRANS_TIME] = 1 * HZ, - [NEIGH_VAR_BASE_REACHABLE_TIME] = 30 * HZ, - [NEIGH_VAR_DELAY_PROBE_TIME] = 5 * HZ, - [NEIGH_VAR_GC_STALETIME] = 60 * HZ, - [NEIGH_VAR_QUEUE_LEN_BYTES] = SK_WMEM_MAX, - [NEIGH_VAR_PROXY_QLEN] = 0, - [NEIGH_VAR_ANYCAST_DELAY] = 0, - [NEIGH_VAR_PROXY_DELAY] = 0, - [NEIGH_VAR_LOCKTIME] = 1 * HZ, - }, - }, - .gc_interval = 30 * HZ, - .gc_thresh1 = 128, - .gc_thresh2 = 512, - .gc_thresh3 = 1024, -}; - -static int dn_neigh_construct(struct neighbour *neigh) -{ - struct net_device *dev = neigh->dev; - struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n); - struct dn_dev *dn_db; - struct neigh_parms *parms; - - rcu_read_lock(); - dn_db = rcu_dereference(dev->dn_ptr); - if (dn_db == NULL) { - rcu_read_unlock(); - return -EINVAL; - } - - parms = dn_db->neigh_parms; - if (!parms) { - rcu_read_unlock(); - return -EINVAL; - } - - __neigh_parms_put(neigh->parms); - neigh->parms = neigh_parms_clone(parms); - rcu_read_unlock(); - - neigh->ops = &dn_neigh_ops; - neigh->nud_state = NUD_NOARP; - neigh->output = neigh->ops->connected_output; - - if ((dev->type == ARPHRD_IPGRE) || (dev->flags & IFF_POINTOPOINT)) - memcpy(neigh->ha, dev->broadcast, dev->addr_len); - else if ((dev->type == ARPHRD_ETHER) || (dev->type == ARPHRD_LOOPBACK)) - dn_dn2eth(neigh->ha, dn->addr); - else { - net_dbg_ratelimited("Trying to create neigh for hw %d\n", - dev->type); - return -EINVAL; - } - - /* - * Make an estimate of the remote block size by assuming that its - * two less then the device mtu, which it true for ethernet (and - * other things which support long format headers) since there is - * an extra length field (of 16 bits) which isn't part of the - * ethernet headers and which the DECnet specs won't admit is part - * of the DECnet routing headers either. - * - * If we over estimate here its no big deal, the NSP negotiations - * will prevent us from sending packets which are too large for the - * remote node to handle. In any case this figure is normally updated - * by a hello message in most cases. - */ - dn->blksize = dev->mtu - 2; - - return 0; -} - -static void dn_neigh_error_report(struct neighbour *neigh, struct sk_buff *skb) -{ - printk(KERN_DEBUG "dn_neigh_error_report: called\n"); - kfree_skb(skb); -} - -static int dn_neigh_output(struct neighbour *neigh, struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - struct dn_route *rt = (struct dn_route *)dst; - struct net_device *dev = neigh->dev; - char mac_addr[ETH_ALEN]; - unsigned int seq; - int err; - - dn_dn2eth(mac_addr, rt->rt_local_src); - do { - seq = read_seqbegin(&neigh->ha_lock); - err = dev_hard_header(skb, dev, ntohs(skb->protocol), - neigh->ha, mac_addr, skb->len); - } while (read_seqretry(&neigh->ha_lock, seq)); - - if (err >= 0) - err = dev_queue_xmit(skb); - else { - kfree_skb(skb); - err = -EINVAL; - } - return err; -} - -static int dn_neigh_output_packet(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - struct dn_route *rt = (struct dn_route *)dst; - struct neighbour *neigh = rt->n; - - return neigh->output(neigh, skb); -} - -/* - * For talking to broadcast devices: Ethernet & PPP - */ -static int dn_long_output(struct neighbour *neigh, struct sock *sk, - struct sk_buff *skb) -{ - struct net_device *dev = neigh->dev; - int headroom = dev->hard_header_len + sizeof(struct dn_long_packet) + 3; - unsigned char *data; - struct dn_long_packet *lp; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - - if (skb_headroom(skb) < headroom) { - struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom); - if (skb2 == NULL) { - net_crit_ratelimited("dn_long_output: no memory\n"); - kfree_skb(skb); - return -ENOBUFS; - } - consume_skb(skb); - skb = skb2; - net_info_ratelimited("dn_long_output: Increasing headroom\n"); - } - - data = skb_push(skb, sizeof(struct dn_long_packet) + 3); - lp = (struct dn_long_packet *)(data+3); - - *((__le16 *)data) = cpu_to_le16(skb->len - 2); - *(data + 2) = 1 | DN_RT_F_PF; /* Padding */ - - lp->msgflg = DN_RT_PKT_LONG|(cb->rt_flags&(DN_RT_F_IE|DN_RT_F_RQR|DN_RT_F_RTS)); - lp->d_area = lp->d_subarea = 0; - dn_dn2eth(lp->d_id, cb->dst); - lp->s_area = lp->s_subarea = 0; - dn_dn2eth(lp->s_id, cb->src); - lp->nl2 = 0; - lp->visit_ct = cb->hops & 0x3f; - lp->s_class = 0; - lp->pt = 0; - - skb_reset_network_header(skb); - - return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING, - &init_net, sk, skb, NULL, neigh->dev, - dn_neigh_output_packet); -} - -/* - * For talking to pointopoint and multidrop devices: DDCMP and X.25 - */ -static int dn_short_output(struct neighbour *neigh, struct sock *sk, - struct sk_buff *skb) -{ - struct net_device *dev = neigh->dev; - int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2; - struct dn_short_packet *sp; - unsigned char *data; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - - if (skb_headroom(skb) < headroom) { - struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom); - if (skb2 == NULL) { - net_crit_ratelimited("dn_short_output: no memory\n"); - kfree_skb(skb); - return -ENOBUFS; - } - consume_skb(skb); - skb = skb2; - net_info_ratelimited("dn_short_output: Increasing headroom\n"); - } - - data = skb_push(skb, sizeof(struct dn_short_packet) + 2); - *((__le16 *)data) = cpu_to_le16(skb->len - 2); - sp = (struct dn_short_packet *)(data+2); - - sp->msgflg = DN_RT_PKT_SHORT|(cb->rt_flags&(DN_RT_F_RQR|DN_RT_F_RTS)); - sp->dstnode = cb->dst; - sp->srcnode = cb->src; - sp->forward = cb->hops & 0x3f; - - skb_reset_network_header(skb); - - return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING, - &init_net, sk, skb, NULL, neigh->dev, - dn_neigh_output_packet); -} - -/* - * For talking to DECnet phase III nodes - * Phase 3 output is the same as short output, execpt that - * it clears the area bits before transmission. - */ -static int dn_phase3_output(struct neighbour *neigh, struct sock *sk, - struct sk_buff *skb) -{ - struct net_device *dev = neigh->dev; - int headroom = dev->hard_header_len + sizeof(struct dn_short_packet) + 2; - struct dn_short_packet *sp; - unsigned char *data; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - if (skb_headroom(skb) < headroom) { - struct sk_buff *skb2 = skb_realloc_headroom(skb, headroom); - if (skb2 == NULL) { - net_crit_ratelimited("dn_phase3_output: no memory\n"); - kfree_skb(skb); - return -ENOBUFS; - } - consume_skb(skb); - skb = skb2; - net_info_ratelimited("dn_phase3_output: Increasing headroom\n"); - } - - data = skb_push(skb, sizeof(struct dn_short_packet) + 2); - *((__le16 *)data) = cpu_to_le16(skb->len - 2); - sp = (struct dn_short_packet *)(data + 2); - - sp->msgflg = DN_RT_PKT_SHORT|(cb->rt_flags&(DN_RT_F_RQR|DN_RT_F_RTS)); - sp->dstnode = cb->dst & cpu_to_le16(0x03ff); - sp->srcnode = cb->src & cpu_to_le16(0x03ff); - sp->forward = cb->hops & 0x3f; - - skb_reset_network_header(skb); - - return NF_HOOK(NFPROTO_DECNET, NF_DN_POST_ROUTING, - &init_net, sk, skb, NULL, neigh->dev, - dn_neigh_output_packet); -} - -int dn_to_neigh_output(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - struct dn_route *rt = (struct dn_route *) dst; - struct neighbour *neigh = rt->n; - struct dn_neigh *dn = container_of(neigh, struct dn_neigh, n); - struct dn_dev *dn_db; - bool use_long; - - rcu_read_lock(); - dn_db = rcu_dereference(neigh->dev->dn_ptr); - if (dn_db == NULL) { - rcu_read_unlock(); - return -EINVAL; - } - use_long = dn_db->use_long; - rcu_read_unlock(); - - if (dn->flags & DN_NDFLAG_P3) - return dn_phase3_output(neigh, sk, skb); - if (use_long) - return dn_long_output(neigh, sk, skb); - else - return dn_short_output(neigh, sk, skb); -} - -/* - * Unfortunately, the neighbour code uses the device in its hash - * function, so we don't get any advantage from it. This function - * basically does a neigh_lookup(), but without comparing the device - * field. This is required for the On-Ethernet cache - */ - -/* - * Pointopoint link receives a hello message - */ -void dn_neigh_pointopoint_hello(struct sk_buff *skb) -{ - kfree_skb(skb); -} - -/* - * Ethernet router hello message received - */ -int dn_neigh_router_hello(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct rtnode_hello_message *msg = (struct rtnode_hello_message *)skb->data; - - struct neighbour *neigh; - struct dn_neigh *dn; - struct dn_dev *dn_db; - __le16 src; - - src = dn_eth2dn(msg->id); - - neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1); - - dn = container_of(neigh, struct dn_neigh, n); - - if (neigh) { - write_lock(&neigh->lock); - - neigh->used = jiffies; - dn_db = rcu_dereference(neigh->dev->dn_ptr); - - if (!(neigh->nud_state & NUD_PERMANENT)) { - neigh->updated = jiffies; - - if (neigh->dev->type == ARPHRD_ETHER) - memcpy(neigh->ha, &eth_hdr(skb)->h_source, ETH_ALEN); - - dn->blksize = le16_to_cpu(msg->blksize); - dn->priority = msg->priority; - - dn->flags &= ~DN_NDFLAG_P3; - - switch (msg->iinfo & DN_RT_INFO_TYPE) { - case DN_RT_INFO_L1RT: - dn->flags &=~DN_NDFLAG_R2; - dn->flags |= DN_NDFLAG_R1; - break; - case DN_RT_INFO_L2RT: - dn->flags |= DN_NDFLAG_R2; - } - } - - /* Only use routers in our area */ - if ((le16_to_cpu(src)>>10) == (le16_to_cpu((decnet_address))>>10)) { - if (!dn_db->router) { - dn_db->router = neigh_clone(neigh); - } else { - if (msg->priority > ((struct dn_neigh *)dn_db->router)->priority) - neigh_release(xchg(&dn_db->router, neigh_clone(neigh))); - } - } - write_unlock(&neigh->lock); - neigh_release(neigh); - } - - kfree_skb(skb); - return 0; -} - -/* - * Endnode hello message received - */ -int dn_neigh_endnode_hello(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct endnode_hello_message *msg = (struct endnode_hello_message *)skb->data; - struct neighbour *neigh; - struct dn_neigh *dn; - __le16 src; - - src = dn_eth2dn(msg->id); - - neigh = __neigh_lookup(&dn_neigh_table, &src, skb->dev, 1); - - dn = container_of(neigh, struct dn_neigh, n); - - if (neigh) { - write_lock(&neigh->lock); - - neigh->used = jiffies; - - if (!(neigh->nud_state & NUD_PERMANENT)) { - neigh->updated = jiffies; - - if (neigh->dev->type == ARPHRD_ETHER) - memcpy(neigh->ha, &eth_hdr(skb)->h_source, ETH_ALEN); - dn->flags &= ~(DN_NDFLAG_R1 | DN_NDFLAG_R2); - dn->blksize = le16_to_cpu(msg->blksize); - dn->priority = 0; - } - - write_unlock(&neigh->lock); - neigh_release(neigh); - } - - kfree_skb(skb); - return 0; -} - -static char *dn_find_slot(char *base, int max, int priority) -{ - int i; - unsigned char *min = NULL; - - base += 6; /* skip first id */ - - for(i = 0; i < max; i++) { - if (!min || (*base < *min)) - min = base; - base += 7; /* find next priority */ - } - - if (!min) - return NULL; - - return (*min < priority) ? (min - 6) : NULL; -} - -struct elist_cb_state { - struct net_device *dev; - unsigned char *ptr; - unsigned char *rs; - int t, n; -}; - -static void neigh_elist_cb(struct neighbour *neigh, void *_info) -{ - struct elist_cb_state *s = _info; - struct dn_neigh *dn; - - if (neigh->dev != s->dev) - return; - - dn = container_of(neigh, struct dn_neigh, n); - if (!(dn->flags & (DN_NDFLAG_R1|DN_NDFLAG_R2))) - return; - - if (s->t == s->n) - s->rs = dn_find_slot(s->ptr, s->n, dn->priority); - else - s->t++; - if (s->rs == NULL) - return; - - dn_dn2eth(s->rs, dn->addr); - s->rs += 6; - *(s->rs) = neigh->nud_state & NUD_CONNECTED ? 0x80 : 0x0; - *(s->rs) |= dn->priority; - s->rs++; -} - -int dn_neigh_elist(struct net_device *dev, unsigned char *ptr, int n) -{ - struct elist_cb_state state; - - state.dev = dev; - state.t = 0; - state.n = n; - state.ptr = ptr; - state.rs = ptr; - - neigh_for_each(&dn_neigh_table, neigh_elist_cb, &state); - - return state.t; -} - - -#ifdef CONFIG_PROC_FS - -static inline void dn_neigh_format_entry(struct seq_file *seq, - struct neighbour *n) -{ - struct dn_neigh *dn = container_of(n, struct dn_neigh, n); - char buf[DN_ASCBUF_LEN]; - - read_lock(&n->lock); - seq_printf(seq, "%-7s %s%s%s %02x %02d %07ld %-8s\n", - dn_addr2asc(le16_to_cpu(dn->addr), buf), - (dn->flags&DN_NDFLAG_R1) ? "1" : "-", - (dn->flags&DN_NDFLAG_R2) ? "2" : "-", - (dn->flags&DN_NDFLAG_P3) ? "3" : "-", - dn->n.nud_state, - refcount_read(&dn->n.refcnt), - dn->blksize, - (dn->n.dev) ? dn->n.dev->name : "?"); - read_unlock(&n->lock); -} - -static int dn_neigh_seq_show(struct seq_file *seq, void *v) -{ - if (v == SEQ_START_TOKEN) { - seq_puts(seq, "Addr Flags State Use Blksize Dev\n"); - } else { - dn_neigh_format_entry(seq, v); - } - - return 0; -} - -static void *dn_neigh_seq_start(struct seq_file *seq, loff_t *pos) -{ - return neigh_seq_start(seq, pos, &dn_neigh_table, - NEIGH_SEQ_NEIGH_ONLY); -} - -static const struct seq_operations dn_neigh_seq_ops = { - .start = dn_neigh_seq_start, - .next = neigh_seq_next, - .stop = neigh_seq_stop, - .show = dn_neigh_seq_show, -}; -#endif - -void __init dn_neigh_init(void) -{ - neigh_table_init(NEIGH_DN_TABLE, &dn_neigh_table); - proc_create_net("decnet_neigh", 0444, init_net.proc_net, - &dn_neigh_seq_ops, sizeof(struct neigh_seq_state)); -} - -void __exit dn_neigh_cleanup(void) -{ - remove_proc_entry("decnet_neigh", init_net.proc_net); - neigh_table_clear(NEIGH_DN_TABLE, &dn_neigh_table); -} diff --git a/net/decnet/dn_nsp_in.c b/net/decnet/dn_nsp_in.c deleted file mode 100644 index c97bdca5ec30..000000000000 --- a/net/decnet/dn_nsp_in.c +++ /dev/null @@ -1,906 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Network Services Protocol (Input) - * - * Author: Eduardo Marcelo Serrat <emserrat(a)geocities.com> - * - * Changes: - * - * Steve Whitehouse: Split into dn_nsp_in.c and dn_nsp_out.c from - * original dn_nsp.c. - * Steve Whitehouse: Updated to work with my new routing architecture. - * Steve Whitehouse: Add changes from Eduardo Serrat's patches. - * Steve Whitehouse: Put all ack handling code in a common routine. - * Steve Whitehouse: Put other common bits into dn_nsp_rx() - * Steve Whitehouse: More checks on skb->len to catch bogus packets - * Fixed various race conditions and possible nasties. - * Steve Whitehouse: Now handles returned conninit frames. - * David S. Miller: New socket locking - * Steve Whitehouse: Fixed lockup when socket filtering was enabled. - * Paul Koning: Fix to push CC sockets into RUN when acks are - * received. - * Steve Whitehouse: - * Patrick Caulfield: Checking conninits for correctness & sending of error - * responses. - * Steve Whitehouse: Added backlog congestion level return codes. - * Patrick Caulfield: - * Steve Whitehouse: Added flow control support (outbound) - * Steve Whitehouse: Prepare for nonlinear skbs - */ - -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - -*******************************************************************************/ - -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/in.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/sockios.h> -#include <linux/net.h> -#include <linux/netdevice.h> -#include <linux/inet.h> -#include <linux/route.h> -#include <linux/slab.h> -#include <net/sock.h> -#include <net/tcp_states.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/termios.h> -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/netfilter_decnet.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/dn.h> -#include <net/dn_nsp.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> - -extern int decnet_log_martians; - -static void dn_log_martian(struct sk_buff *skb, const char *msg) -{ - if (decnet_log_martians) { - char *devname = skb->dev ? skb->dev->name : "???"; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - net_info_ratelimited("DECnet: Martian packet (%s) dev=%s src=0x%04hx dst=0x%04hx srcport=0x%04hx dstport=0x%04hx\n", - msg, devname, - le16_to_cpu(cb->src), - le16_to_cpu(cb->dst), - le16_to_cpu(cb->src_port), - le16_to_cpu(cb->dst_port)); - } -} - -/* - * For this function we've flipped the cross-subchannel bit - * if the message is an otherdata or linkservice message. Thus - * we can use it to work out what to update. - */ -static void dn_ack(struct sock *sk, struct sk_buff *skb, unsigned short ack) -{ - struct dn_scp *scp = DN_SK(sk); - unsigned short type = ((ack >> 12) & 0x0003); - int wakeup = 0; - - switch (type) { - case 0: /* ACK - Data */ - if (dn_after(ack, scp->ackrcv_dat)) { - scp->ackrcv_dat = ack & 0x0fff; - wakeup |= dn_nsp_check_xmit_queue(sk, skb, - &scp->data_xmit_queue, - ack); - } - break; - case 1: /* NAK - Data */ - break; - case 2: /* ACK - OtherData */ - if (dn_after(ack, scp->ackrcv_oth)) { - scp->ackrcv_oth = ack & 0x0fff; - wakeup |= dn_nsp_check_xmit_queue(sk, skb, - &scp->other_xmit_queue, - ack); - } - break; - case 3: /* NAK - OtherData */ - break; - } - - if (wakeup && !sock_flag(sk, SOCK_DEAD)) - sk->sk_state_change(sk); -} - -/* - * This function is a universal ack processor. - */ -static int dn_process_ack(struct sock *sk, struct sk_buff *skb, int oth) -{ - __le16 *ptr = (__le16 *)skb->data; - int len = 0; - unsigned short ack; - - if (skb->len < 2) - return len; - - if ((ack = le16_to_cpu(*ptr)) & 0x8000) { - skb_pull(skb, 2); - ptr++; - len += 2; - if ((ack & 0x4000) == 0) { - if (oth) - ack ^= 0x2000; - dn_ack(sk, skb, ack); - } - } - - if (skb->len < 2) - return len; - - if ((ack = le16_to_cpu(*ptr)) & 0x8000) { - skb_pull(skb, 2); - len += 2; - if ((ack & 0x4000) == 0) { - if (oth) - ack ^= 0x2000; - dn_ack(sk, skb, ack); - } - } - - return len; -} - - -/** - * dn_check_idf - Check an image data field format is correct. - * @pptr: Pointer to pointer to image data - * @len: Pointer to length of image data - * @max: The maximum allowed length of the data in the image data field - * @follow_on: Check that this many bytes exist beyond the end of the image data - * - * Returns: 0 if ok, -1 on error - */ -static inline int dn_check_idf(unsigned char **pptr, int *len, unsigned char max, unsigned char follow_on) -{ - unsigned char *ptr = *pptr; - unsigned char flen = *ptr++; - - (*len)--; - if (flen > max) - return -1; - if ((flen + follow_on) > *len) - return -1; - - *len -= flen; - *pptr = ptr + flen; - return 0; -} - -/* - * Table of reason codes to pass back to node which sent us a badly - * formed message, plus text messages for the log. A zero entry in - * the reason field means "don't reply" otherwise a disc init is sent with - * the specified reason code. - */ -static struct { - unsigned short reason; - const char *text; -} ci_err_table[] = { - { 0, "CI: Truncated message" }, - { NSP_REASON_ID, "CI: Destination username error" }, - { NSP_REASON_ID, "CI: Destination username type" }, - { NSP_REASON_US, "CI: Source username error" }, - { 0, "CI: Truncated at menuver" }, - { 0, "CI: Truncated before access or user data" }, - { NSP_REASON_IO, "CI: Access data format error" }, - { NSP_REASON_IO, "CI: User data format error" } -}; - -/* - * This function uses a slightly different lookup method - * to find its sockets, since it searches on object name/number - * rather than port numbers. Various tests are done to ensure that - * the incoming data is in the correct format before it is queued to - * a socket. - */ -static struct sock *dn_find_listener(struct sk_buff *skb, unsigned short *reason) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct nsp_conn_init_msg *msg = (struct nsp_conn_init_msg *)skb->data; - struct sockaddr_dn dstaddr; - struct sockaddr_dn srcaddr; - unsigned char type = 0; - int dstlen; - int srclen; - unsigned char *ptr; - int len; - int err = 0; - unsigned char menuver; - - memset(&dstaddr, 0, sizeof(struct sockaddr_dn)); - memset(&srcaddr, 0, sizeof(struct sockaddr_dn)); - - /* - * 1. Decode & remove message header - */ - cb->src_port = msg->srcaddr; - cb->dst_port = msg->dstaddr; - cb->services = msg->services; - cb->info = msg->info; - cb->segsize = le16_to_cpu(msg->segsize); - - if (!pskb_may_pull(skb, sizeof(*msg))) - goto err_out; - - skb_pull(skb, sizeof(*msg)); - - len = skb->len; - ptr = skb->data; - - /* - * 2. Check destination end username format - */ - dstlen = dn_username2sockaddr(ptr, len, &dstaddr, &type); - err++; - if (dstlen < 0) - goto err_out; - - err++; - if (type > 1) - goto err_out; - - len -= dstlen; - ptr += dstlen; - - /* - * 3. Check source end username format - */ - srclen = dn_username2sockaddr(ptr, len, &srcaddr, &type); - err++; - if (srclen < 0) - goto err_out; - - len -= srclen; - ptr += srclen; - err++; - if (len < 1) - goto err_out; - - menuver = *ptr; - ptr++; - len--; - - /* - * 4. Check that optional data actually exists if menuver says it does - */ - err++; - if ((menuver & (DN_MENUVER_ACC | DN_MENUVER_USR)) && (len < 1)) - goto err_out; - - /* - * 5. Check optional access data format - */ - err++; - if (menuver & DN_MENUVER_ACC) { - if (dn_check_idf(&ptr, &len, 39, 1)) - goto err_out; - if (dn_check_idf(&ptr, &len, 39, 1)) - goto err_out; - if (dn_check_idf(&ptr, &len, 39, (menuver & DN_MENUVER_USR) ? 1 : 0)) - goto err_out; - } - - /* - * 6. Check optional user data format - */ - err++; - if (menuver & DN_MENUVER_USR) { - if (dn_check_idf(&ptr, &len, 16, 0)) - goto err_out; - } - - /* - * 7. Look up socket based on destination end username - */ - return dn_sklist_find_listener(&dstaddr); -err_out: - dn_log_martian(skb, ci_err_table[err].text); - *reason = ci_err_table[err].reason; - return NULL; -} - - -static void dn_nsp_conn_init(struct sock *sk, struct sk_buff *skb) -{ - if (sk_acceptq_is_full(sk)) { - kfree_skb(skb); - return; - } - - sk_acceptq_added(sk); - skb_queue_tail(&sk->sk_receive_queue, skb); - sk->sk_state_change(sk); -} - -static void dn_nsp_conn_conf(struct sock *sk, struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct dn_scp *scp = DN_SK(sk); - unsigned char *ptr; - - if (skb->len < 4) - goto out; - - ptr = skb->data; - cb->services = *ptr++; - cb->info = *ptr++; - cb->segsize = le16_to_cpu(*(__le16 *)ptr); - - if ((scp->state == DN_CI) || (scp->state == DN_CD)) { - scp->persist = 0; - scp->addrrem = cb->src_port; - sk->sk_state = TCP_ESTABLISHED; - scp->state = DN_RUN; - scp->services_rem = cb->services; - scp->info_rem = cb->info; - scp->segsize_rem = cb->segsize; - - if ((scp->services_rem & NSP_FC_MASK) == NSP_FC_NONE) - scp->max_window = decnet_no_fc_max_cwnd; - - if (skb->len > 0) { - u16 dlen = *skb->data; - if ((dlen <= 16) && (dlen <= skb->len)) { - scp->conndata_in.opt_optl = cpu_to_le16(dlen); - skb_copy_from_linear_data_offset(skb, 1, - scp->conndata_in.opt_data, dlen); - } - } - dn_nsp_send_link(sk, DN_NOCHANGE, 0); - if (!sock_flag(sk, SOCK_DEAD)) - sk->sk_state_change(sk); - } - -out: - kfree_skb(skb); -} - -static void dn_nsp_conn_ack(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - - if (scp->state == DN_CI) { - scp->state = DN_CD; - scp->persist = 0; - } - - kfree_skb(skb); -} - -static void dn_nsp_disc_init(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - struct dn_skb_cb *cb = DN_SKB_CB(skb); - unsigned short reason; - - if (skb->len < 2) - goto out; - - reason = le16_to_cpu(*(__le16 *)skb->data); - skb_pull(skb, 2); - - scp->discdata_in.opt_status = cpu_to_le16(reason); - scp->discdata_in.opt_optl = 0; - memset(scp->discdata_in.opt_data, 0, 16); - - if (skb->len > 0) { - u16 dlen = *skb->data; - if ((dlen <= 16) && (dlen <= skb->len)) { - scp->discdata_in.opt_optl = cpu_to_le16(dlen); - skb_copy_from_linear_data_offset(skb, 1, scp->discdata_in.opt_data, dlen); - } - } - - scp->addrrem = cb->src_port; - sk->sk_state = TCP_CLOSE; - - switch (scp->state) { - case DN_CI: - case DN_CD: - scp->state = DN_RJ; - sk->sk_err = ECONNREFUSED; - break; - case DN_RUN: - sk->sk_shutdown |= SHUTDOWN_MASK; - scp->state = DN_DN; - break; - case DN_DI: - scp->state = DN_DIC; - break; - } - - if (!sock_flag(sk, SOCK_DEAD)) { - if (sk->sk_socket->state != SS_UNCONNECTED) - sk->sk_socket->state = SS_DISCONNECTING; - sk->sk_state_change(sk); - } - - /* - * It appears that its possible for remote machines to send disc - * init messages with no port identifier if we are in the CI and - * possibly also the CD state. Obviously we shouldn't reply with - * a message if we don't know what the end point is. - */ - if (scp->addrrem) { - dn_nsp_send_disc(sk, NSP_DISCCONF, NSP_REASON_DC, GFP_ATOMIC); - } - scp->persist_fxn = dn_destroy_timer; - scp->persist = dn_nsp_persist(sk); - -out: - kfree_skb(skb); -} - -/* - * disc_conf messages are also called no_resources or no_link - * messages depending upon the "reason" field. - */ -static void dn_nsp_disc_conf(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - unsigned short reason; - - if (skb->len != 2) - goto out; - - reason = le16_to_cpu(*(__le16 *)skb->data); - - sk->sk_state = TCP_CLOSE; - - switch (scp->state) { - case DN_CI: - scp->state = DN_NR; - break; - case DN_DR: - if (reason == NSP_REASON_DC) - scp->state = DN_DRC; - if (reason == NSP_REASON_NL) - scp->state = DN_CN; - break; - case DN_DI: - scp->state = DN_DIC; - break; - case DN_RUN: - sk->sk_shutdown |= SHUTDOWN_MASK; - fallthrough; - case DN_CC: - scp->state = DN_CN; - } - - if (!sock_flag(sk, SOCK_DEAD)) { - if (sk->sk_socket->state != SS_UNCONNECTED) - sk->sk_socket->state = SS_DISCONNECTING; - sk->sk_state_change(sk); - } - - scp->persist_fxn = dn_destroy_timer; - scp->persist = dn_nsp_persist(sk); - -out: - kfree_skb(skb); -} - -static void dn_nsp_linkservice(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - unsigned short segnum; - unsigned char lsflags; - signed char fcval; - int wake_up = 0; - char *ptr = skb->data; - unsigned char fctype = scp->services_rem & NSP_FC_MASK; - - if (skb->len != 4) - goto out; - - segnum = le16_to_cpu(*(__le16 *)ptr); - ptr += 2; - lsflags = *(unsigned char *)ptr++; - fcval = *ptr; - - /* - * Here we ignore erronous packets which should really - * should cause a connection abort. It is not critical - * for now though. - */ - if (lsflags & 0xf8) - goto out; - - if (seq_next(scp->numoth_rcv, segnum)) { - seq_add(&scp->numoth_rcv, 1); - switch(lsflags & 0x04) { /* FCVAL INT */ - case 0x00: /* Normal Request */ - switch(lsflags & 0x03) { /* FCVAL MOD */ - case 0x00: /* Request count */ - if (fcval < 0) { - unsigned char p_fcval = -fcval; - if ((scp->flowrem_dat > p_fcval) && - (fctype == NSP_FC_SCMC)) { - scp->flowrem_dat -= p_fcval; - } - } else if (fcval > 0) { - scp->flowrem_dat += fcval; - wake_up = 1; - } - break; - case 0x01: /* Stop outgoing data */ - scp->flowrem_sw = DN_DONTSEND; - break; - case 0x02: /* Ok to start again */ - scp->flowrem_sw = DN_SEND; - dn_nsp_output(sk); - wake_up = 1; - } - break; - case 0x04: /* Interrupt Request */ - if (fcval > 0) { - scp->flowrem_oth += fcval; - wake_up = 1; - } - break; - } - if (wake_up && !sock_flag(sk, SOCK_DEAD)) - sk->sk_state_change(sk); - } - - dn_nsp_send_oth_ack(sk); - -out: - kfree_skb(skb); -} - -/* - * Copy of sock_queue_rcv_skb (from sock.h) without - * bh_lock_sock() (its already held when this is called) which - * also allows data and other data to be queued to a socket. - */ -static __inline__ int dn_queue_skb(struct sock *sk, struct sk_buff *skb, int sig, struct sk_buff_head *queue) -{ - int err; - - /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces - number of warnings when compiling with -W --ANK - */ - if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >= - (unsigned int)sk->sk_rcvbuf) { - err = -ENOMEM; - goto out; - } - - err = sk_filter(sk, skb); - if (err) - goto out; - - skb_set_owner_r(skb, sk); - skb_queue_tail(queue, skb); - - if (!sock_flag(sk, SOCK_DEAD)) - sk->sk_data_ready(sk); -out: - return err; -} - -static void dn_nsp_otherdata(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - unsigned short segnum; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - int queued = 0; - - if (skb->len < 2) - goto out; - - cb->segnum = segnum = le16_to_cpu(*(__le16 *)skb->data); - skb_pull(skb, 2); - - if (seq_next(scp->numoth_rcv, segnum)) { - - if (dn_queue_skb(sk, skb, SIGURG, &scp->other_receive_queue) == 0) { - seq_add(&scp->numoth_rcv, 1); - scp->other_report = 0; - queued = 1; - } - } - - dn_nsp_send_oth_ack(sk); -out: - if (!queued) - kfree_skb(skb); -} - -static void dn_nsp_data(struct sock *sk, struct sk_buff *skb) -{ - int queued = 0; - unsigned short segnum; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct dn_scp *scp = DN_SK(sk); - - if (skb->len < 2) - goto out; - - cb->segnum = segnum = le16_to_cpu(*(__le16 *)skb->data); - skb_pull(skb, 2); - - if (seq_next(scp->numdat_rcv, segnum)) { - if (dn_queue_skb(sk, skb, SIGIO, &sk->sk_receive_queue) == 0) { - seq_add(&scp->numdat_rcv, 1); - queued = 1; - } - - if ((scp->flowloc_sw == DN_SEND) && dn_congested(sk)) { - scp->flowloc_sw = DN_DONTSEND; - dn_nsp_send_link(sk, DN_DONTSEND, 0); - } - } - - dn_nsp_send_data_ack(sk); -out: - if (!queued) - kfree_skb(skb); -} - -/* - * If one of our conninit messages is returned, this function - * deals with it. It puts the socket into the NO_COMMUNICATION - * state. - */ -static void dn_returned_conn_init(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - - if (scp->state == DN_CI) { - scp->state = DN_NC; - sk->sk_state = TCP_CLOSE; - if (!sock_flag(sk, SOCK_DEAD)) - sk->sk_state_change(sk); - } - - kfree_skb(skb); -} - -static int dn_nsp_no_socket(struct sk_buff *skb, unsigned short reason) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - int ret = NET_RX_DROP; - - /* Must not reply to returned packets */ - if (cb->rt_flags & DN_RT_F_RTS) - goto out; - - if ((reason != NSP_REASON_OK) && ((cb->nsp_flags & 0x0c) == 0x08)) { - switch (cb->nsp_flags & 0x70) { - case 0x10: - case 0x60: /* (Retransmitted) Connect Init */ - dn_nsp_return_disc(skb, NSP_DISCINIT, reason); - ret = NET_RX_SUCCESS; - break; - case 0x20: /* Connect Confirm */ - dn_nsp_return_disc(skb, NSP_DISCCONF, reason); - ret = NET_RX_SUCCESS; - break; - } - } - -out: - kfree_skb(skb); - return ret; -} - -static int dn_nsp_rx_packet(struct net *net, struct sock *sk2, - struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct sock *sk = NULL; - unsigned char *ptr = (unsigned char *)skb->data; - unsigned short reason = NSP_REASON_NL; - - if (!pskb_may_pull(skb, 2)) - goto free_out; - - skb_reset_transport_header(skb); - cb->nsp_flags = *ptr++; - - if (decnet_debug_level & 2) - printk(KERN_DEBUG "dn_nsp_rx: Message type 0x%02x\n", (int)cb->nsp_flags); - - if (cb->nsp_flags & 0x83) - goto free_out; - - /* - * Filter out conninits and useless packet types - */ - if ((cb->nsp_flags & 0x0c) == 0x08) { - switch (cb->nsp_flags & 0x70) { - case 0x00: /* NOP */ - case 0x70: /* Reserved */ - case 0x50: /* Reserved, Phase II node init */ - goto free_out; - case 0x10: - case 0x60: - if (unlikely(cb->rt_flags & DN_RT_F_RTS)) - goto free_out; - sk = dn_find_listener(skb, &reason); - goto got_it; - } - } - - if (!pskb_may_pull(skb, 3)) - goto free_out; - - /* - * Grab the destination address. - */ - cb->dst_port = *(__le16 *)ptr; - cb->src_port = 0; - ptr += 2; - - /* - * If not a connack, grab the source address too. - */ - if (pskb_may_pull(skb, 5)) { - cb->src_port = *(__le16 *)ptr; - ptr += 2; - skb_pull(skb, 5); - } - - /* - * Returned packets... - * Swap src & dst and look up in the normal way. - */ - if (unlikely(cb->rt_flags & DN_RT_F_RTS)) { - swap(cb->dst_port, cb->src_port); - swap(cb->dst, cb->src); - } - - /* - * Find the socket to which this skb is destined. - */ - sk = dn_find_by_skb(skb); -got_it: - if (sk != NULL) { - struct dn_scp *scp = DN_SK(sk); - - /* Reset backoff */ - scp->nsp_rxtshift = 0; - - /* - * We linearize everything except data segments here. - */ - if (cb->nsp_flags & ~0x60) { - if (unlikely(skb_linearize(skb))) - goto free_out; - } - - return sk_receive_skb(sk, skb, 0); - } - - return dn_nsp_no_socket(skb, reason); - -free_out: - kfree_skb(skb); - return NET_RX_DROP; -} - -int dn_nsp_rx(struct sk_buff *skb) -{ - return NF_HOOK(NFPROTO_DECNET, NF_DN_LOCAL_IN, - &init_net, NULL, skb, skb->dev, NULL, - dn_nsp_rx_packet); -} - -/* - * This is the main receive routine for sockets. It is called - * from the above when the socket is not busy, and also from - * sock_release() when there is a backlog queued up. - */ -int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb) -{ - struct dn_scp *scp = DN_SK(sk); - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - if (cb->rt_flags & DN_RT_F_RTS) { - if (cb->nsp_flags == 0x18 || cb->nsp_flags == 0x68) - dn_returned_conn_init(sk, skb); - else - kfree_skb(skb); - return NET_RX_SUCCESS; - } - - /* - * Control packet. - */ - if ((cb->nsp_flags & 0x0c) == 0x08) { - switch (cb->nsp_flags & 0x70) { - case 0x10: - case 0x60: - dn_nsp_conn_init(sk, skb); - break; - case 0x20: - dn_nsp_conn_conf(sk, skb); - break; - case 0x30: - dn_nsp_disc_init(sk, skb); - break; - case 0x40: - dn_nsp_disc_conf(sk, skb); - break; - } - - } else if (cb->nsp_flags == 0x24) { - /* - * Special for connacks, 'cos they don't have - * ack data or ack otherdata info. - */ - dn_nsp_conn_ack(sk, skb); - } else { - int other = 1; - - /* both data and ack frames can kick a CC socket into RUN */ - if ((scp->state == DN_CC) && !sock_flag(sk, SOCK_DEAD)) { - scp->state = DN_RUN; - sk->sk_state = TCP_ESTABLISHED; - sk->sk_state_change(sk); - } - - if ((cb->nsp_flags & 0x1c) == 0) - other = 0; - if (cb->nsp_flags == 0x04) - other = 0; - - /* - * Read out ack data here, this applies equally - * to data, other data, link serivce and both - * ack data and ack otherdata. - */ - dn_process_ack(sk, skb, other); - - /* - * If we've some sort of data here then call a - * suitable routine for dealing with it, otherwise - * the packet is an ack and can be discarded. - */ - if ((cb->nsp_flags & 0x0c) == 0) { - - if (scp->state != DN_RUN) - goto free_out; - - switch (cb->nsp_flags) { - case 0x10: /* LS */ - dn_nsp_linkservice(sk, skb); - break; - case 0x30: /* OD */ - dn_nsp_otherdata(sk, skb); - break; - default: - dn_nsp_data(sk, skb); - } - - } else { /* Ack, chuck it out here */ -free_out: - kfree_skb(skb); - } - } - - return NET_RX_SUCCESS; -} diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c deleted file mode 100644 index 00f2ed721ec1..000000000000 --- a/net/decnet/dn_nsp_out.c +++ /dev/null @@ -1,695 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Network Services Protocol (Output) - * - * Author: Eduardo Marcelo Serrat <emserrat(a)geocities.com> - * - * Changes: - * - * Steve Whitehouse: Split into dn_nsp_in.c and dn_nsp_out.c from - * original dn_nsp.c. - * Steve Whitehouse: Updated to work with my new routing architecture. - * Steve Whitehouse: Added changes from Eduardo Serrat's patches. - * Steve Whitehouse: Now conninits have the "return" bit set. - * Steve Whitehouse: Fixes to check alloc'd skbs are non NULL! - * Moved output state machine into one function - * Steve Whitehouse: New output state machine - * Paul Koning: Connect Confirm message fix. - * Eduardo Serrat: Fix to stop dn_nsp_do_disc() sending malformed packets. - * Steve Whitehouse: dn_nsp_output() and friends needed a spring clean - * Steve Whitehouse: Moved dn_nsp_send() in here from route.h - */ - -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - -*******************************************************************************/ - -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/in.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/string.h> -#include <linux/sockios.h> -#include <linux/net.h> -#include <linux/netdevice.h> -#include <linux/inet.h> -#include <linux/route.h> -#include <linux/slab.h> -#include <net/sock.h> -#include <linux/fcntl.h> -#include <linux/mm.h> -#include <linux/termios.h> -#include <linux/interrupt.h> -#include <linux/proc_fs.h> -#include <linux/stat.h> -#include <linux/init.h> -#include <linux/poll.h> -#include <linux/if_packet.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/dn.h> -#include <net/dn_nsp.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> - - -static int nsp_backoff[NSP_MAXRXTSHIFT + 1] = { 1, 2, 4, 8, 16, 32, 64, 64, 64, 64, 64, 64, 64 }; - -static void dn_nsp_send(struct sk_buff *skb) -{ - struct sock *sk = skb->sk; - struct dn_scp *scp = DN_SK(sk); - struct dst_entry *dst; - struct flowidn fld; - - skb_reset_transport_header(skb); - scp->stamp = jiffies; - - dst = sk_dst_check(sk, 0); - if (dst) { -try_again: - skb_dst_set(skb, dst); - dst_output(&init_net, skb->sk, skb); - return; - } - - memset(&fld, 0, sizeof(fld)); - fld.flowidn_oif = sk->sk_bound_dev_if; - fld.saddr = dn_saddr2dn(&scp->addr); - fld.daddr = dn_saddr2dn(&scp->peer); - dn_sk_ports_copy(&fld, scp); - fld.flowidn_proto = DNPROTO_NSP; - if (dn_route_output_sock(&sk->sk_dst_cache, &fld, sk, 0) == 0) { - dst = sk_dst_get(sk); - sk->sk_route_caps = dst->dev->features; - goto try_again; - } - - sk->sk_err = EHOSTUNREACH; - if (!sock_flag(sk, SOCK_DEAD)) - sk->sk_state_change(sk); -} - - -/* - * If sk == NULL, then we assume that we are supposed to be making - * a routing layer skb. If sk != NULL, then we are supposed to be - * creating an skb for the NSP layer. - * - * The eventual aim is for each socket to have a cached header size - * for its outgoing packets, and to set hdr from this when sk != NULL. - */ -struct sk_buff *dn_alloc_skb(struct sock *sk, int size, gfp_t pri) -{ - struct sk_buff *skb; - int hdr = 64; - - if ((skb = alloc_skb(size + hdr, pri)) == NULL) - return NULL; - - skb->protocol = htons(ETH_P_DNA_RT); - skb->pkt_type = PACKET_OUTGOING; - - if (sk) - skb_set_owner_w(skb, sk); - - skb_reserve(skb, hdr); - - return skb; -} - -/* - * Calculate persist timer based upon the smoothed round - * trip time and the variance. Backoff according to the - * nsp_backoff[] array. - */ -unsigned long dn_nsp_persist(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - unsigned long t = ((scp->nsp_srtt >> 2) + scp->nsp_rttvar) >> 1; - - t *= nsp_backoff[scp->nsp_rxtshift]; - - if (t < HZ) t = HZ; - if (t > (600*HZ)) t = (600*HZ); - - if (scp->nsp_rxtshift < NSP_MAXRXTSHIFT) - scp->nsp_rxtshift++; - - /* printk(KERN_DEBUG "rxtshift %lu, t=%lu\n", scp->nsp_rxtshift, t); */ - - return t; -} - -/* - * This is called each time we get an estimate for the rtt - * on the link. - */ -static void dn_nsp_rtt(struct sock *sk, long rtt) -{ - struct dn_scp *scp = DN_SK(sk); - long srtt = (long)scp->nsp_srtt; - long rttvar = (long)scp->nsp_rttvar; - long delta; - - /* - * If the jiffies clock flips over in the middle of timestamp - * gathering this value might turn out negative, so we make sure - * that is it always positive here. - */ - if (rtt < 0) - rtt = -rtt; - /* - * Add new rtt to smoothed average - */ - delta = ((rtt << 3) - srtt); - srtt += (delta >> 3); - if (srtt >= 1) - scp->nsp_srtt = (unsigned long)srtt; - else - scp->nsp_srtt = 1; - - /* - * Add new rtt varience to smoothed varience - */ - delta >>= 1; - rttvar += ((((delta>0)?(delta):(-delta)) - rttvar) >> 2); - if (rttvar >= 1) - scp->nsp_rttvar = (unsigned long)rttvar; - else - scp->nsp_rttvar = 1; - - /* printk(KERN_DEBUG "srtt=%lu rttvar=%lu\n", scp->nsp_srtt, scp->nsp_rttvar); */ -} - -/** - * dn_nsp_clone_and_send - Send a data packet by cloning it - * @skb: The packet to clone and transmit - * @gfp: memory allocation flag - * - * Clone a queued data or other data packet and transmit it. - * - * Returns: The number of times the packet has been sent previously - */ -static inline unsigned int dn_nsp_clone_and_send(struct sk_buff *skb, - gfp_t gfp) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct sk_buff *skb2; - int ret = 0; - - if ((skb2 = skb_clone(skb, gfp)) != NULL) { - ret = cb->xmit_count; - cb->xmit_count++; - cb->stamp = jiffies; - skb2->sk = skb->sk; - dn_nsp_send(skb2); - } - - return ret; -} - -/** - * dn_nsp_output - Try and send something from socket queues - * @sk: The socket whose queues are to be investigated - * - * Try and send the packet on the end of the data and other data queues. - * Other data gets priority over data, and if we retransmit a packet we - * reduce the window by dividing it in two. - * - */ -void dn_nsp_output(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - struct sk_buff *skb; - unsigned int reduce_win = 0; - - /* - * First we check for otherdata/linkservice messages - */ - if ((skb = skb_peek(&scp->other_xmit_queue)) != NULL) - reduce_win = dn_nsp_clone_and_send(skb, GFP_ATOMIC); - - /* - * If we may not send any data, we don't. - * If we are still trying to get some other data down the - * channel, we don't try and send any data. - */ - if (reduce_win || (scp->flowrem_sw != DN_SEND)) - goto recalc_window; - - if ((skb = skb_peek(&scp->data_xmit_queue)) != NULL) - reduce_win = dn_nsp_clone_and_send(skb, GFP_ATOMIC); - - /* - * If we've sent any frame more than once, we cut the - * send window size in half. There is always a minimum - * window size of one available. - */ -recalc_window: - if (reduce_win) { - scp->snd_window >>= 1; - if (scp->snd_window < NSP_MIN_WINDOW) - scp->snd_window = NSP_MIN_WINDOW; - } -} - -int dn_nsp_xmit_timeout(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - dn_nsp_output(sk); - - if (!skb_queue_empty(&scp->data_xmit_queue) || - !skb_queue_empty(&scp->other_xmit_queue)) - scp->persist = dn_nsp_persist(sk); - - return 0; -} - -static inline __le16 *dn_mk_common_header(struct dn_scp *scp, struct sk_buff *skb, unsigned char msgflag, int len) -{ - unsigned char *ptr = skb_push(skb, len); - - BUG_ON(len < 5); - - *ptr++ = msgflag; - *((__le16 *)ptr) = scp->addrrem; - ptr += 2; - *((__le16 *)ptr) = scp->addrloc; - ptr += 2; - return (__le16 __force *)ptr; -} - -static __le16 *dn_mk_ack_header(struct sock *sk, struct sk_buff *skb, unsigned char msgflag, int hlen, int other) -{ - struct dn_scp *scp = DN_SK(sk); - unsigned short acknum = scp->numdat_rcv & 0x0FFF; - unsigned short ackcrs = scp->numoth_rcv & 0x0FFF; - __le16 *ptr; - - BUG_ON(hlen < 9); - - scp->ackxmt_dat = acknum; - scp->ackxmt_oth = ackcrs; - acknum |= 0x8000; - ackcrs |= 0x8000; - - /* If this is an "other data/ack" message, swap acknum and ackcrs */ - if (other) - swap(acknum, ackcrs); - - /* Set "cross subchannel" bit in ackcrs */ - ackcrs |= 0x2000; - - ptr = dn_mk_common_header(scp, skb, msgflag, hlen); - - *ptr++ = cpu_to_le16(acknum); - *ptr++ = cpu_to_le16(ackcrs); - - return ptr; -} - -static __le16 *dn_nsp_mk_data_header(struct sock *sk, struct sk_buff *skb, int oth) -{ - struct dn_scp *scp = DN_SK(sk); - struct dn_skb_cb *cb = DN_SKB_CB(skb); - __le16 *ptr = dn_mk_ack_header(sk, skb, cb->nsp_flags, 11, oth); - - if (unlikely(oth)) { - cb->segnum = scp->numoth; - seq_add(&scp->numoth, 1); - } else { - cb->segnum = scp->numdat; - seq_add(&scp->numdat, 1); - } - *(ptr++) = cpu_to_le16(cb->segnum); - - return ptr; -} - -void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, - gfp_t gfp, int oth) -{ - struct dn_scp *scp = DN_SK(sk); - struct dn_skb_cb *cb = DN_SKB_CB(skb); - unsigned long t = ((scp->nsp_srtt >> 2) + scp->nsp_rttvar) >> 1; - - cb->xmit_count = 0; - dn_nsp_mk_data_header(sk, skb, oth); - - /* - * Slow start: If we have been idle for more than - * one RTT, then reset window to min size. - */ - if ((jiffies - scp->stamp) > t) - scp->snd_window = NSP_MIN_WINDOW; - - if (oth) - skb_queue_tail(&scp->other_xmit_queue, skb); - else - skb_queue_tail(&scp->data_xmit_queue, skb); - - if (scp->flowrem_sw != DN_SEND) - return; - - dn_nsp_clone_and_send(skb, gfp); -} - - -int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff_head *q, unsigned short acknum) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct dn_scp *scp = DN_SK(sk); - struct sk_buff *skb2, *n, *ack = NULL; - int wakeup = 0; - int try_retrans = 0; - unsigned long reftime = cb->stamp; - unsigned long pkttime; - unsigned short xmit_count; - unsigned short segnum; - - skb_queue_walk_safe(q, skb2, n) { - struct dn_skb_cb *cb2 = DN_SKB_CB(skb2); - - if (dn_before_or_equal(cb2->segnum, acknum)) - ack = skb2; - - /* printk(KERN_DEBUG "ack: %s %04x %04x\n", ack ? "ACK" : "SKIP", (int)cb2->segnum, (int)acknum); */ - - if (ack == NULL) - continue; - - /* printk(KERN_DEBUG "check_xmit_queue: %04x, %d\n", acknum, cb2->xmit_count); */ - - /* Does _last_ packet acked have xmit_count > 1 */ - try_retrans = 0; - /* Remember to wake up the sending process */ - wakeup = 1; - /* Keep various statistics */ - pkttime = cb2->stamp; - xmit_count = cb2->xmit_count; - segnum = cb2->segnum; - /* Remove and drop ack'ed packet */ - skb_unlink(ack, q); - kfree_skb(ack); - ack = NULL; - - /* - * We don't expect to see acknowledgements for packets we - * haven't sent yet. - */ - WARN_ON(xmit_count == 0); - - /* - * If the packet has only been sent once, we can use it - * to calculate the RTT and also open the window a little - * further. - */ - if (xmit_count == 1) { - if (dn_equal(segnum, acknum)) - dn_nsp_rtt(sk, (long)(pkttime - reftime)); - - if (scp->snd_window < scp->max_window) - scp->snd_window++; - } - - /* - * Packet has been sent more than once. If this is the last - * packet to be acknowledged then we want to send the next - * packet in the send queue again (assumes the remote host does - * go-back-N error control). - */ - if (xmit_count > 1) - try_retrans = 1; - } - - if (try_retrans) - dn_nsp_output(sk); - - return wakeup; -} - -void dn_nsp_send_data_ack(struct sock *sk) -{ - struct sk_buff *skb = NULL; - - if ((skb = dn_alloc_skb(sk, 9, GFP_ATOMIC)) == NULL) - return; - - skb_reserve(skb, 9); - dn_mk_ack_header(sk, skb, 0x04, 9, 0); - dn_nsp_send(skb); -} - -void dn_nsp_send_oth_ack(struct sock *sk) -{ - struct sk_buff *skb = NULL; - - if ((skb = dn_alloc_skb(sk, 9, GFP_ATOMIC)) == NULL) - return; - - skb_reserve(skb, 9); - dn_mk_ack_header(sk, skb, 0x14, 9, 1); - dn_nsp_send(skb); -} - - -void dn_send_conn_ack (struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - struct sk_buff *skb = NULL; - struct nsp_conn_ack_msg *msg; - - if ((skb = dn_alloc_skb(sk, 3, sk->sk_allocation)) == NULL) - return; - - msg = skb_put(skb, 3); - msg->msgflg = 0x24; - msg->dstaddr = scp->addrrem; - - dn_nsp_send(skb); -} - -static int dn_nsp_retrans_conn_conf(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - if (scp->state == DN_CC) - dn_send_conn_conf(sk, GFP_ATOMIC); - - return 0; -} - -void dn_send_conn_conf(struct sock *sk, gfp_t gfp) -{ - struct dn_scp *scp = DN_SK(sk); - struct sk_buff *skb = NULL; - struct nsp_conn_init_msg *msg; - __u8 len = (__u8)le16_to_cpu(scp->conndata_out.opt_optl); - - if ((skb = dn_alloc_skb(sk, 50 + len, gfp)) == NULL) - return; - - msg = skb_put(skb, sizeof(*msg)); - msg->msgflg = 0x28; - msg->dstaddr = scp->addrrem; - msg->srcaddr = scp->addrloc; - msg->services = scp->services_loc; - msg->info = scp->info_loc; - msg->segsize = cpu_to_le16(scp->segsize_loc); - - skb_put_u8(skb, len); - - if (len > 0) - skb_put_data(skb, scp->conndata_out.opt_data, len); - - - dn_nsp_send(skb); - - scp->persist = dn_nsp_persist(sk); - scp->persist_fxn = dn_nsp_retrans_conn_conf; -} - - -static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, gfp_t gfp, - struct dst_entry *dst, - int ddl, unsigned char *dd, __le16 rem, __le16 loc) -{ - struct sk_buff *skb = NULL; - int size = 7 + ddl + ((msgflg == NSP_DISCINIT) ? 1 : 0); - unsigned char *msg; - - if ((dst == NULL) || (rem == 0)) { - net_dbg_ratelimited("DECnet: dn_nsp_do_disc: BUG! Please report this to SteveW(a)ACM.org rem=%u dst=%p\n", - le16_to_cpu(rem), dst); - return; - } - - if ((skb = dn_alloc_skb(sk, size, gfp)) == NULL) - return; - - msg = skb_put(skb, size); - *msg++ = msgflg; - *(__le16 *)msg = rem; - msg += 2; - *(__le16 *)msg = loc; - msg += 2; - *(__le16 *)msg = cpu_to_le16(reason); - msg += 2; - if (msgflg == NSP_DISCINIT) - *msg++ = ddl; - - if (ddl) { - memcpy(msg, dd, ddl); - } - - /* - * This doesn't go via the dn_nsp_send() function since we need - * to be able to send disc packets out which have no socket - * associations. - */ - skb_dst_set(skb, dst_clone(dst)); - dst_output(&init_net, skb->sk, skb); -} - - -void dn_nsp_send_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, gfp_t gfp) -{ - struct dn_scp *scp = DN_SK(sk); - int ddl = 0; - - if (msgflg == NSP_DISCINIT) - ddl = le16_to_cpu(scp->discdata_out.opt_optl); - - if (reason == 0) - reason = le16_to_cpu(scp->discdata_out.opt_status); - - dn_nsp_do_disc(sk, msgflg, reason, gfp, __sk_dst_get(sk), ddl, - scp->discdata_out.opt_data, scp->addrrem, scp->addrloc); -} - - -void dn_nsp_return_disc(struct sk_buff *skb, unsigned char msgflg, - unsigned short reason) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - int ddl = 0; - gfp_t gfp = GFP_ATOMIC; - - dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb_dst(skb), ddl, - NULL, cb->src_port, cb->dst_port); -} - - -void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval) -{ - struct dn_scp *scp = DN_SK(sk); - struct sk_buff *skb; - unsigned char *ptr; - gfp_t gfp = GFP_ATOMIC; - - if ((skb = dn_alloc_skb(sk, DN_MAX_NSP_DATA_HEADER + 2, gfp)) == NULL) - return; - - skb_reserve(skb, DN_MAX_NSP_DATA_HEADER); - ptr = skb_put(skb, 2); - DN_SKB_CB(skb)->nsp_flags = 0x10; - *ptr++ = lsflags; - *ptr = fcval; - - dn_nsp_queue_xmit(sk, skb, gfp, 1); - - scp->persist = dn_nsp_persist(sk); - scp->persist_fxn = dn_nsp_xmit_timeout; -} - -static int dn_nsp_retrans_conninit(struct sock *sk) -{ - struct dn_scp *scp = DN_SK(sk); - - if (scp->state == DN_CI) - dn_nsp_send_conninit(sk, NSP_RCI); - - return 0; -} - -void dn_nsp_send_conninit(struct sock *sk, unsigned char msgflg) -{ - struct dn_scp *scp = DN_SK(sk); - struct nsp_conn_init_msg *msg; - unsigned char aux; - unsigned char menuver; - struct dn_skb_cb *cb; - unsigned char type = 1; - gfp_t allocation = (msgflg == NSP_CI) ? sk->sk_allocation : GFP_ATOMIC; - struct sk_buff *skb = dn_alloc_skb(sk, 200, allocation); - - if (!skb) - return; - - cb = DN_SKB_CB(skb); - msg = skb_put(skb, sizeof(*msg)); - - msg->msgflg = msgflg; - msg->dstaddr = 0x0000; /* Remote Node will assign it*/ - - msg->srcaddr = scp->addrloc; - msg->services = scp->services_loc; /* Requested flow control */ - msg->info = scp->info_loc; /* Version Number */ - msg->segsize = cpu_to_le16(scp->segsize_loc); /* Max segment size */ - - if (scp->peer.sdn_objnum) - type = 0; - - skb_put(skb, dn_sockaddr2username(&scp->peer, - skb_tail_pointer(skb), type)); - skb_put(skb, dn_sockaddr2username(&scp->addr, - skb_tail_pointer(skb), 2)); - - menuver = DN_MENUVER_ACC | DN_MENUVER_USR; - if (scp->peer.sdn_flags & SDF_PROXY) - menuver |= DN_MENUVER_PRX; - if (scp->peer.sdn_flags & SDF_UICPROXY) - menuver |= DN_MENUVER_UIC; - - skb_put_u8(skb, menuver); /* Menu Version */ - - aux = scp->accessdata.acc_userl; - skb_put_u8(skb, aux); - if (aux > 0) - skb_put_data(skb, scp->accessdata.acc_user, aux); - - aux = scp->accessdata.acc_passl; - skb_put_u8(skb, aux); - if (aux > 0) - skb_put_data(skb, scp->accessdata.acc_pass, aux); - - aux = scp->accessdata.acc_accl; - skb_put_u8(skb, aux); - if (aux > 0) - skb_put_data(skb, scp->accessdata.acc_acc, aux); - - aux = (__u8)le16_to_cpu(scp->conndata_out.opt_optl); - skb_put_u8(skb, aux); - if (aux > 0) - skb_put_data(skb, scp->conndata_out.opt_data, aux); - - scp->persist = dn_nsp_persist(sk); - scp->persist_fxn = dn_nsp_retrans_conninit; - - cb->rt_flags = DN_RT_F_RQR; - - dn_nsp_send(skb); -} diff --git a/net/decnet/dn_route.c b/net/decnet/dn_route.c deleted file mode 100644 index 4cac31d22a50..000000000000 --- a/net/decnet/dn_route.c +++ /dev/null @@ -1,1923 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Routing Functions (Endnode and Router) - * - * Authors: Steve Whitehouse <SteveW(a)ACM.org> - * Eduardo Marcelo Serrat <emserrat(a)geocities.com> - * - * Changes: - * Steve Whitehouse : Fixes to allow "intra-ethernet" and - * "return-to-sender" bits on outgoing - * packets. - * Steve Whitehouse : Timeouts for cached routes. - * Steve Whitehouse : Use dst cache for input routes too. - * Steve Whitehouse : Fixed error values in dn_send_skb. - * Steve Whitehouse : Rework routing functions to better fit - * DECnet routing design - * Alexey Kuznetsov : New SMP locking - * Steve Whitehouse : More SMP locking changes & dn_cache_dump() - * Steve Whitehouse : Prerouting NF hook, now really is prerouting. - * Fixed possible skb leak in rtnetlink funcs. - * Steve Whitehouse : Dave Miller's dynamic hash table sizing and - * Alexey Kuznetsov's finer grained locking - * from ipv4/route.c. - * Steve Whitehouse : Routing is now starting to look like a - * sensible set of code now, mainly due to - * my copying the IPv4 routing code. The - * hooks here are modified and will continue - * to evolve for a while. - * Steve Whitehouse : Real SMP at last :-) Also new netfilter - * stuff. Look out raw sockets your days - * are numbered! - * Steve Whitehouse : Added return-to-sender functions. Added - * backlog congestion level return codes. - * Steve Whitehouse : Fixed bug where routes were set up with - * no ref count on net devices. - * Steve Whitehouse : RCU for the route cache - * Steve Whitehouse : Preparations for the flow cache - * Steve Whitehouse : Prepare for nonlinear skbs - */ - -/****************************************************************************** - (c) 1995-1998 E.M. Serrat emserrat(a)geocities.com - -*******************************************************************************/ - -#include <linux/errno.h> -#include <linux/types.h> -#include <linux/socket.h> -#include <linux/in.h> -#include <linux/kernel.h> -#include <linux/sockios.h> -#include <linux/net.h> -#include <linux/netdevice.h> -#include <linux/inet.h> -#include <linux/route.h> -#include <linux/in_route.h> -#include <linux/slab.h> -#include <net/sock.h> -#include <linux/mm.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/init.h> -#include <linux/rtnetlink.h> -#include <linux/string.h> -#include <linux/netfilter_decnet.h> -#include <linux/rcupdate.h> -#include <linux/times.h> -#include <linux/export.h> -#include <asm/errno.h> -#include <net/net_namespace.h> -#include <net/netlink.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/fib_rules.h> -#include <net/dn.h> -#include <net/dn_dev.h> -#include <net/dn_nsp.h> -#include <net/dn_route.h> -#include <net/dn_neigh.h> -#include <net/dn_fib.h> - -struct dn_rt_hash_bucket -{ - struct dn_route __rcu *chain; - spinlock_t lock; -}; - -extern struct neigh_table dn_neigh_table; - - -static unsigned char dn_hiord_addr[6] = {0xAA,0x00,0x04,0x00,0x00,0x00}; - -static const int dn_rt_min_delay = 2 * HZ; -static const int dn_rt_max_delay = 10 * HZ; -static const int dn_rt_mtu_expires = 10 * 60 * HZ; - -static unsigned long dn_rt_deadline; - -static int dn_dst_gc(struct dst_ops *ops); -static struct dst_entry *dn_dst_check(struct dst_entry *, __u32); -static unsigned int dn_dst_default_advmss(const struct dst_entry *dst); -static unsigned int dn_dst_mtu(const struct dst_entry *dst); -static void dn_dst_destroy(struct dst_entry *); -static void dn_dst_ifdown(struct dst_entry *, struct net_device *dev, int how); -static struct dst_entry *dn_dst_negative_advice(struct dst_entry *); -static void dn_dst_link_failure(struct sk_buff *); -static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk, - struct sk_buff *skb , u32 mtu, - bool confirm_neigh); -static void dn_dst_redirect(struct dst_entry *dst, struct sock *sk, - struct sk_buff *skb); -static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst, - struct sk_buff *skb, - const void *daddr); -static int dn_route_input(struct sk_buff *); -static void dn_run_flush(struct timer_list *unused); - -static struct dn_rt_hash_bucket *dn_rt_hash_table; -static unsigned int dn_rt_hash_mask; - -static struct timer_list dn_route_timer; -static DEFINE_TIMER(dn_rt_flush_timer, dn_run_flush); -int decnet_dst_gc_interval = 2; - -static struct dst_ops dn_dst_ops = { - .family = PF_DECnet, - .gc_thresh = 128, - .gc = dn_dst_gc, - .check = dn_dst_check, - .default_advmss = dn_dst_default_advmss, - .mtu = dn_dst_mtu, - .cow_metrics = dst_cow_metrics_generic, - .destroy = dn_dst_destroy, - .ifdown = dn_dst_ifdown, - .negative_advice = dn_dst_negative_advice, - .link_failure = dn_dst_link_failure, - .update_pmtu = dn_dst_update_pmtu, - .redirect = dn_dst_redirect, - .neigh_lookup = dn_dst_neigh_lookup, -}; - -static void dn_dst_destroy(struct dst_entry *dst) -{ - struct dn_route *rt = (struct dn_route *) dst; - - if (rt->n) - neigh_release(rt->n); - dst_destroy_metrics_generic(dst); -} - -static void dn_dst_ifdown(struct dst_entry *dst, struct net_device *dev, int how) -{ - if (how) { - struct dn_route *rt = (struct dn_route *) dst; - struct neighbour *n = rt->n; - - if (n && n->dev == dev) { - n->dev = dev_net(dev)->loopback_dev; - dev_hold(n->dev); - dev_put(dev); - } - } -} - -static __inline__ unsigned int dn_hash(__le16 src, __le16 dst) -{ - __u16 tmp = (__u16 __force)(src ^ dst); - tmp ^= (tmp >> 3); - tmp ^= (tmp >> 5); - tmp ^= (tmp >> 10); - return dn_rt_hash_mask & (unsigned int)tmp; -} - -static void dn_dst_check_expire(struct timer_list *unused) -{ - int i; - struct dn_route *rt; - struct dn_route __rcu **rtp; - unsigned long now = jiffies; - unsigned long expire = 120 * HZ; - - for (i = 0; i <= dn_rt_hash_mask; i++) { - rtp = &dn_rt_hash_table[i].chain; - - spin_lock(&dn_rt_hash_table[i].lock); - while ((rt = rcu_dereference_protected(*rtp, - lockdep_is_held(&dn_rt_hash_table[i].lock))) != NULL) { - if (atomic_read(&rt->dst.__refcnt) > 1 || - (now - rt->dst.lastuse) < expire) { - rtp = &rt->dn_next; - continue; - } - *rtp = rt->dn_next; - rt->dn_next = NULL; - dst_dev_put(&rt->dst); - dst_release(&rt->dst); - } - spin_unlock(&dn_rt_hash_table[i].lock); - - if ((jiffies - now) > 0) - break; - } - - mod_timer(&dn_route_timer, now + decnet_dst_gc_interval * HZ); -} - -static int dn_dst_gc(struct dst_ops *ops) -{ - struct dn_route *rt; - struct dn_route __rcu **rtp; - int i; - unsigned long now = jiffies; - unsigned long expire = 10 * HZ; - - for (i = 0; i <= dn_rt_hash_mask; i++) { - - spin_lock_bh(&dn_rt_hash_table[i].lock); - rtp = &dn_rt_hash_table[i].chain; - - while ((rt = rcu_dereference_protected(*rtp, - lockdep_is_held(&dn_rt_hash_table[i].lock))) != NULL) { - if (atomic_read(&rt->dst.__refcnt) > 1 || - (now - rt->dst.lastuse) < expire) { - rtp = &rt->dn_next; - continue; - } - *rtp = rt->dn_next; - rt->dn_next = NULL; - dst_dev_put(&rt->dst); - dst_release(&rt->dst); - break; - } - spin_unlock_bh(&dn_rt_hash_table[i].lock); - } - - return 0; -} - -/* - * The decnet standards don't impose a particular minimum mtu, what they - * do insist on is that the routing layer accepts a datagram of at least - * 230 bytes long. Here we have to subtract the routing header length from - * 230 to get the minimum acceptable mtu. If there is no neighbour, then we - * assume the worst and use a long header size. - * - * We update both the mtu and the advertised mss (i.e. the segment size we - * advertise to the other end). - */ -static void dn_dst_update_pmtu(struct dst_entry *dst, struct sock *sk, - struct sk_buff *skb, u32 mtu, - bool confirm_neigh) -{ - struct dn_route *rt = (struct dn_route *) dst; - struct neighbour *n = rt->n; - u32 min_mtu = 230; - struct dn_dev *dn; - - dn = n ? rcu_dereference_raw(n->dev->dn_ptr) : NULL; - - if (dn && dn->use_long == 0) - min_mtu -= 6; - else - min_mtu -= 21; - - if (dst_metric(dst, RTAX_MTU) > mtu && mtu >= min_mtu) { - if (!(dst_metric_locked(dst, RTAX_MTU))) { - dst_metric_set(dst, RTAX_MTU, mtu); - dst_set_expires(dst, dn_rt_mtu_expires); - } - if (!(dst_metric_locked(dst, RTAX_ADVMSS))) { - u32 mss = mtu - DN_MAX_NSP_DATA_HEADER; - u32 existing_mss = dst_metric_raw(dst, RTAX_ADVMSS); - if (!existing_mss || existing_mss > mss) - dst_metric_set(dst, RTAX_ADVMSS, mss); - } - } -} - -static void dn_dst_redirect(struct dst_entry *dst, struct sock *sk, - struct sk_buff *skb) -{ -} - -/* - * When a route has been marked obsolete. (e.g. routing cache flush) - */ -static struct dst_entry *dn_dst_check(struct dst_entry *dst, __u32 cookie) -{ - return NULL; -} - -static struct dst_entry *dn_dst_negative_advice(struct dst_entry *dst) -{ - dst_release(dst); - return NULL; -} - -static void dn_dst_link_failure(struct sk_buff *skb) -{ -} - -static inline int compare_keys(struct flowidn *fl1, struct flowidn *fl2) -{ - return ((fl1->daddr ^ fl2->daddr) | - (fl1->saddr ^ fl2->saddr) | - (fl1->flowidn_mark ^ fl2->flowidn_mark) | - (fl1->flowidn_scope ^ fl2->flowidn_scope) | - (fl1->flowidn_oif ^ fl2->flowidn_oif) | - (fl1->flowidn_iif ^ fl2->flowidn_iif)) == 0; -} - -static int dn_insert_route(struct dn_route *rt, unsigned int hash, struct dn_route **rp) -{ - struct dn_route *rth; - struct dn_route __rcu **rthp; - unsigned long now = jiffies; - - rthp = &dn_rt_hash_table[hash].chain; - - spin_lock_bh(&dn_rt_hash_table[hash].lock); - while ((rth = rcu_dereference_protected(*rthp, - lockdep_is_held(&dn_rt_hash_table[hash].lock))) != NULL) { - if (compare_keys(&rth->fld, &rt->fld)) { - /* Put it first */ - *rthp = rth->dn_next; - rcu_assign_pointer(rth->dn_next, - dn_rt_hash_table[hash].chain); - rcu_assign_pointer(dn_rt_hash_table[hash].chain, rth); - - dst_hold_and_use(&rth->dst, now); - spin_unlock_bh(&dn_rt_hash_table[hash].lock); - - dst_release_immediate(&rt->dst); - *rp = rth; - return 0; - } - rthp = &rth->dn_next; - } - - rcu_assign_pointer(rt->dn_next, dn_rt_hash_table[hash].chain); - rcu_assign_pointer(dn_rt_hash_table[hash].chain, rt); - - dst_hold_and_use(&rt->dst, now); - spin_unlock_bh(&dn_rt_hash_table[hash].lock); - *rp = rt; - return 0; -} - -static void dn_run_flush(struct timer_list *unused) -{ - int i; - struct dn_route *rt, *next; - - for (i = 0; i < dn_rt_hash_mask; i++) { - spin_lock_bh(&dn_rt_hash_table[i].lock); - - if ((rt = xchg((struct dn_route **)&dn_rt_hash_table[i].chain, NULL)) == NULL) - goto nothing_to_declare; - - for(; rt; rt = next) { - next = rcu_dereference_raw(rt->dn_next); - RCU_INIT_POINTER(rt->dn_next, NULL); - dst_dev_put(&rt->dst); - dst_release(&rt->dst); - } - -nothing_to_declare: - spin_unlock_bh(&dn_rt_hash_table[i].lock); - } -} - -static DEFINE_SPINLOCK(dn_rt_flush_lock); - -void dn_rt_cache_flush(int delay) -{ - unsigned long now = jiffies; - int user_mode = !in_interrupt(); - - if (delay < 0) - delay = dn_rt_min_delay; - - spin_lock_bh(&dn_rt_flush_lock); - - if (del_timer(&dn_rt_flush_timer) && delay > 0 && dn_rt_deadline) { - long tmo = (long)(dn_rt_deadline - now); - - if (user_mode && tmo < dn_rt_max_delay - dn_rt_min_delay) - tmo = 0; - - if (delay > tmo) - delay = tmo; - } - - if (delay <= 0) { - spin_unlock_bh(&dn_rt_flush_lock); - dn_run_flush(NULL); - return; - } - - if (dn_rt_deadline == 0) - dn_rt_deadline = now + dn_rt_max_delay; - - dn_rt_flush_timer.expires = now + delay; - add_timer(&dn_rt_flush_timer); - spin_unlock_bh(&dn_rt_flush_lock); -} - -/** - * dn_return_short - Return a short packet to its sender - * @skb: The packet to return - * - */ -static int dn_return_short(struct sk_buff *skb) -{ - struct dn_skb_cb *cb; - unsigned char *ptr; - __le16 *src; - __le16 *dst; - - /* Add back headers */ - skb_push(skb, skb->data - skb_network_header(skb)); - - if ((skb = skb_unshare(skb, GFP_ATOMIC)) == NULL) - return NET_RX_DROP; - - cb = DN_SKB_CB(skb); - /* Skip packet length and point to flags */ - ptr = skb->data + 2; - *ptr++ = (cb->rt_flags & ~DN_RT_F_RQR) | DN_RT_F_RTS; - - dst = (__le16 *)ptr; - ptr += 2; - src = (__le16 *)ptr; - ptr += 2; - *ptr = 0; /* Zero hop count */ - - swap(*src, *dst); - - skb->pkt_type = PACKET_OUTGOING; - dn_rt_finish_output(skb, NULL, NULL); - return NET_RX_SUCCESS; -} - -/** - * dn_return_long - Return a long packet to its sender - * @skb: The long format packet to return - * - */ -static int dn_return_long(struct sk_buff *skb) -{ - struct dn_skb_cb *cb; - unsigned char *ptr; - unsigned char *src_addr, *dst_addr; - unsigned char tmp[ETH_ALEN]; - - /* Add back all headers */ - skb_push(skb, skb->data - skb_network_header(skb)); - - if ((skb = skb_unshare(skb, GFP_ATOMIC)) == NULL) - return NET_RX_DROP; - - cb = DN_SKB_CB(skb); - /* Ignore packet length and point to flags */ - ptr = skb->data + 2; - - /* Skip padding */ - if (*ptr & DN_RT_F_PF) { - char padlen = (*ptr & ~DN_RT_F_PF); - ptr += padlen; - } - - *ptr++ = (cb->rt_flags & ~DN_RT_F_RQR) | DN_RT_F_RTS; - ptr += 2; - dst_addr = ptr; - ptr += 8; - src_addr = ptr; - ptr += 6; - *ptr = 0; /* Zero hop count */ - - /* Swap source and destination */ - memcpy(tmp, src_addr, ETH_ALEN); - memcpy(src_addr, dst_addr, ETH_ALEN); - memcpy(dst_addr, tmp, ETH_ALEN); - - skb->pkt_type = PACKET_OUTGOING; - dn_rt_finish_output(skb, dst_addr, src_addr); - return NET_RX_SUCCESS; -} - -/** - * dn_route_rx_packet - Try and find a route for an incoming packet - * @net: The applicable net namespace - * @sk: Socket packet transmitted on - * @skb: The packet to find a route for - * - * Returns: result of input function if route is found, error code otherwise - */ -static int dn_route_rx_packet(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct dn_skb_cb *cb; - int err; - - if ((err = dn_route_input(skb)) == 0) - return dst_input(skb); - - cb = DN_SKB_CB(skb); - if (decnet_debug_level & 4) { - char *devname = skb->dev ? skb->dev->name : "???"; - - printk(KERN_DEBUG - "DECnet: dn_route_rx_packet: rt_flags=0x%02x dev=%s len=%d src=0x%04hx dst=0x%04hx err=%d type=%d\n", - (int)cb->rt_flags, devname, skb->len, - le16_to_cpu(cb->src), le16_to_cpu(cb->dst), - err, skb->pkt_type); - } - - if ((skb->pkt_type == PACKET_HOST) && (cb->rt_flags & DN_RT_F_RQR)) { - switch (cb->rt_flags & DN_RT_PKT_MSK) { - case DN_RT_PKT_SHORT: - return dn_return_short(skb); - case DN_RT_PKT_LONG: - return dn_return_long(skb); - } - } - - kfree_skb(skb); - return NET_RX_DROP; -} - -static int dn_route_rx_long(struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - unsigned char *ptr = skb->data; - - if (!pskb_may_pull(skb, 21)) /* 20 for long header, 1 for shortest nsp */ - goto drop_it; - - skb_pull(skb, 20); - skb_reset_transport_header(skb); - - /* Destination info */ - ptr += 2; - cb->dst = dn_eth2dn(ptr); - if (memcmp(ptr, dn_hiord_addr, 4) != 0) - goto drop_it; - ptr += 6; - - - /* Source info */ - ptr += 2; - cb->src = dn_eth2dn(ptr); - if (memcmp(ptr, dn_hiord_addr, 4) != 0) - goto drop_it; - ptr += 6; - /* Other junk */ - ptr++; - cb->hops = *ptr++; /* Visit Count */ - - return NF_HOOK(NFPROTO_DECNET, NF_DN_PRE_ROUTING, - &init_net, NULL, skb, skb->dev, NULL, - dn_route_rx_packet); - -drop_it: - kfree_skb(skb); - return NET_RX_DROP; -} - - - -static int dn_route_rx_short(struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - unsigned char *ptr = skb->data; - - if (!pskb_may_pull(skb, 6)) /* 5 for short header + 1 for shortest nsp */ - goto drop_it; - - skb_pull(skb, 5); - skb_reset_transport_header(skb); - - cb->dst = *(__le16 *)ptr; - ptr += 2; - cb->src = *(__le16 *)ptr; - ptr += 2; - cb->hops = *ptr & 0x3f; - - return NF_HOOK(NFPROTO_DECNET, NF_DN_PRE_ROUTING, - &init_net, NULL, skb, skb->dev, NULL, - dn_route_rx_packet); - -drop_it: - kfree_skb(skb); - return NET_RX_DROP; -} - -static int dn_route_discard(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - /* - * I know we drop the packet here, but thats considered success in - * this case - */ - kfree_skb(skb); - return NET_RX_SUCCESS; -} - -static int dn_route_ptp_hello(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - dn_dev_hello(skb); - dn_neigh_pointopoint_hello(skb); - return NET_RX_SUCCESS; -} - -int dn_route_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev) -{ - struct dn_skb_cb *cb; - unsigned char flags = 0; - __u16 len = le16_to_cpu(*(__le16 *)skb->data); - struct dn_dev *dn = rcu_dereference(dev->dn_ptr); - unsigned char padlen = 0; - - if (!net_eq(dev_net(dev), &init_net)) - goto dump_it; - - if (dn == NULL) - goto dump_it; - - if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL) - goto out; - - if (!pskb_may_pull(skb, 3)) - goto dump_it; - - skb_pull(skb, 2); - - if (len > skb->len) - goto dump_it; - - skb_trim(skb, len); - - flags = *skb->data; - - cb = DN_SKB_CB(skb); - cb->stamp = jiffies; - cb->iif = dev->ifindex; - - /* - * If we have padding, remove it. - */ - if (flags & DN_RT_F_PF) { - padlen = flags & ~DN_RT_F_PF; - if (!pskb_may_pull(skb, padlen + 1)) - goto dump_it; - skb_pull(skb, padlen); - flags = *skb->data; - } - - skb_reset_network_header(skb); - - /* - * Weed out future version DECnet - */ - if (flags & DN_RT_F_VER) - goto dump_it; - - cb->rt_flags = flags; - - if (decnet_debug_level & 1) - printk(KERN_DEBUG - "dn_route_rcv: got 0x%02x from %s [%d %d %d]\n", - (int)flags, dev->name, len, skb->len, - padlen); - - if (flags & DN_RT_PKT_CNTL) { - if (unlikely(skb_linearize(skb))) - goto dump_it; - - switch (flags & DN_RT_CNTL_MSK) { - case DN_RT_PKT_INIT: - dn_dev_init_pkt(skb); - break; - case DN_RT_PKT_VERI: - dn_dev_veri_pkt(skb); - break; - } - - if (dn->parms.state != DN_DEV_S_RU) - goto dump_it; - - switch (flags & DN_RT_CNTL_MSK) { - case DN_RT_PKT_HELO: - return NF_HOOK(NFPROTO_DECNET, NF_DN_HELLO, - &init_net, NULL, skb, skb->dev, NULL, - dn_route_ptp_hello); - - case DN_RT_PKT_L1RT: - case DN_RT_PKT_L2RT: - return NF_HOOK(NFPROTO_DECNET, NF_DN_ROUTE, - &init_net, NULL, skb, skb->dev, NULL, - dn_route_discard); - case DN_RT_PKT_ERTH: - return NF_HOOK(NFPROTO_DECNET, NF_DN_HELLO, - &init_net, NULL, skb, skb->dev, NULL, - dn_neigh_router_hello); - - case DN_RT_PKT_EEDH: - return NF_HOOK(NFPROTO_DECNET, NF_DN_HELLO, - &init_net, NULL, skb, skb->dev, NULL, - dn_neigh_endnode_hello); - } - } else { - if (dn->parms.state != DN_DEV_S_RU) - goto dump_it; - - skb_pull(skb, 1); /* Pull flags */ - - switch (flags & DN_RT_PKT_MSK) { - case DN_RT_PKT_LONG: - return dn_route_rx_long(skb); - case DN_RT_PKT_SHORT: - return dn_route_rx_short(skb); - } - } - -dump_it: - kfree_skb(skb); -out: - return NET_RX_DROP; -} - -static int dn_output(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct dst_entry *dst = skb_dst(skb); - struct dn_route *rt = (struct dn_route *)dst; - struct net_device *dev = dst->dev; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - int err = -EINVAL; - - if (rt->n == NULL) - goto error; - - skb->dev = dev; - - cb->src = rt->rt_saddr; - cb->dst = rt->rt_daddr; - - /* - * Always set the Intra-Ethernet bit on all outgoing packets - * originated on this node. Only valid flag from upper layers - * is return-to-sender-requested. Set hop count to 0 too. - */ - cb->rt_flags &= ~DN_RT_F_RQR; - cb->rt_flags |= DN_RT_F_IE; - cb->hops = 0; - - return NF_HOOK(NFPROTO_DECNET, NF_DN_LOCAL_OUT, - &init_net, sk, skb, NULL, dev, - dn_to_neigh_output); - -error: - net_dbg_ratelimited("dn_output: This should not happen\n"); - - kfree_skb(skb); - - return err; -} - -static int dn_forward(struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct dst_entry *dst = skb_dst(skb); - struct dn_dev *dn_db = rcu_dereference(dst->dev->dn_ptr); - struct dn_route *rt; - int header_len; - struct net_device *dev = skb->dev; - - if (skb->pkt_type != PACKET_HOST) - goto drop; - - /* Ensure that we have enough space for headers */ - rt = (struct dn_route *)skb_dst(skb); - header_len = dn_db->use_long ? 21 : 6; - if (skb_cow(skb, LL_RESERVED_SPACE(rt->dst.dev)+header_len)) - goto drop; - - /* - * Hop count exceeded. - */ - if (++cb->hops > 30) - goto drop; - - skb->dev = rt->dst.dev; - - /* - * If packet goes out same interface it came in on, then set - * the Intra-Ethernet bit. This has no effect for short - * packets, so we don't need to test for them here. - */ - cb->rt_flags &= ~DN_RT_F_IE; - if (rt->rt_flags & RTCF_DOREDIRECT) - cb->rt_flags |= DN_RT_F_IE; - - return NF_HOOK(NFPROTO_DECNET, NF_DN_FORWARD, - &init_net, NULL, skb, dev, skb->dev, - dn_to_neigh_output); - -drop: - kfree_skb(skb); - return NET_RX_DROP; -} - -/* - * Used to catch bugs. This should never normally get - * called. - */ -static int dn_rt_bug_out(struct net *net, struct sock *sk, struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - net_dbg_ratelimited("dn_rt_bug: skb from:%04x to:%04x\n", - le16_to_cpu(cb->src), le16_to_cpu(cb->dst)); - - kfree_skb(skb); - - return NET_RX_DROP; -} - -static int dn_rt_bug(struct sk_buff *skb) -{ - struct dn_skb_cb *cb = DN_SKB_CB(skb); - - net_dbg_ratelimited("dn_rt_bug: skb from:%04x to:%04x\n", - le16_to_cpu(cb->src), le16_to_cpu(cb->dst)); - - kfree_skb(skb); - - return NET_RX_DROP; -} - -static unsigned int dn_dst_default_advmss(const struct dst_entry *dst) -{ - return dn_mss_from_pmtu(dst->dev, dst_mtu(dst)); -} - -static unsigned int dn_dst_mtu(const struct dst_entry *dst) -{ - unsigned int mtu = dst_metric_raw(dst, RTAX_MTU); - - return mtu ? : dst->dev->mtu; -} - -static struct neighbour *dn_dst_neigh_lookup(const struct dst_entry *dst, - struct sk_buff *skb, - const void *daddr) -{ - return __neigh_lookup_errno(&dn_neigh_table, daddr, dst->dev); -} - -static int dn_rt_set_next_hop(struct dn_route *rt, struct dn_fib_res *res) -{ - struct dn_fib_info *fi = res->fi; - struct net_device *dev = rt->dst.dev; - unsigned int mss_metric; - struct neighbour *n; - - if (fi) { - if (DN_FIB_RES_GW(*res) && - DN_FIB_RES_NH(*res).nh_scope == RT_SCOPE_LINK) - rt->rt_gateway = DN_FIB_RES_GW(*res); - dst_init_metrics(&rt->dst, fi->fib_metrics, true); - } - rt->rt_type = res->type; - - if (dev != NULL && rt->n == NULL) { - n = __neigh_lookup_errno(&dn_neigh_table, &rt->rt_gateway, dev); - if (IS_ERR(n)) - return PTR_ERR(n); - rt->n = n; - } - - if (dst_metric(&rt->dst, RTAX_MTU) > rt->dst.dev->mtu) - dst_metric_set(&rt->dst, RTAX_MTU, rt->dst.dev->mtu); - mss_metric = dst_metric_raw(&rt->dst, RTAX_ADVMSS); - if (mss_metric) { - unsigned int mss = dn_mss_from_pmtu(dev, dst_mtu(&rt->dst)); - if (mss_metric > mss) - dst_metric_set(&rt->dst, RTAX_ADVMSS, mss); - } - return 0; -} - -static inline int dn_match_addr(__le16 addr1, __le16 addr2) -{ - __u16 tmp = le16_to_cpu(addr1) ^ le16_to_cpu(addr2); - int match = 16; - while(tmp) { - tmp >>= 1; - match--; - } - return match; -} - -static __le16 dnet_select_source(const struct net_device *dev, __le16 daddr, int scope) -{ - __le16 saddr = 0; - struct dn_dev *dn_db; - struct dn_ifaddr *ifa; - int best_match = 0; - int ret; - - rcu_read_lock(); - dn_db = rcu_dereference(dev->dn_ptr); - for (ifa = rcu_dereference(dn_db->ifa_list); - ifa != NULL; - ifa = rcu_dereference(ifa->ifa_next)) { - if (ifa->ifa_scope > scope) - continue; - if (!daddr) { - saddr = ifa->ifa_local; - break; - } - ret = dn_match_addr(daddr, ifa->ifa_local); - if (ret > best_match) - saddr = ifa->ifa_local; - if (best_match == 0) - saddr = ifa->ifa_local; - } - rcu_read_unlock(); - - return saddr; -} - -static inline __le16 __dn_fib_res_prefsrc(struct dn_fib_res *res) -{ - return dnet_select_source(DN_FIB_RES_DEV(*res), DN_FIB_RES_GW(*res), res->scope); -} - -static inline __le16 dn_fib_rules_map_destination(__le16 daddr, struct dn_fib_res *res) -{ - __le16 mask = dnet_make_mask(res->prefixlen); - return (daddr&~mask)|res->fi->fib_nh->nh_gw; -} - -static int dn_route_output_slow(struct dst_entry **pprt, const struct flowidn *oldflp, int try_hard) -{ - struct flowidn fld = { - .daddr = oldflp->daddr, - .saddr = oldflp->saddr, - .flowidn_scope = RT_SCOPE_UNIVERSE, - .flowidn_mark = oldflp->flowidn_mark, - .flowidn_iif = LOOPBACK_IFINDEX, - .flowidn_oif = oldflp->flowidn_oif, - }; - struct dn_route *rt = NULL; - struct net_device *dev_out = NULL, *dev; - struct neighbour *neigh = NULL; - unsigned int hash; - unsigned int flags = 0; - struct dn_fib_res res = { .fi = NULL, .type = RTN_UNICAST }; - int err; - int free_res = 0; - __le16 gateway = 0; - - if (decnet_debug_level & 16) - printk(KERN_DEBUG - "dn_route_output_slow: dst=%04x src=%04x mark=%d" - " iif=%d oif=%d\n", le16_to_cpu(oldflp->daddr), - le16_to_cpu(oldflp->saddr), - oldflp->flowidn_mark, LOOPBACK_IFINDEX, - oldflp->flowidn_oif); - - /* If we have an output interface, verify its a DECnet device */ - if (oldflp->flowidn_oif) { - dev_out = dev_get_by_index(&init_net, oldflp->flowidn_oif); - err = -ENODEV; - if (dev_out && dev_out->dn_ptr == NULL) { - dev_put(dev_out); - dev_out = NULL; - } - if (dev_out == NULL) - goto out; - } - - /* If we have a source address, verify that its a local address */ - if (oldflp->saddr) { - err = -EADDRNOTAVAIL; - - if (dev_out) { - if (dn_dev_islocal(dev_out, oldflp->saddr)) - goto source_ok; - dev_put(dev_out); - goto out; - } - rcu_read_lock(); - for_each_netdev_rcu(&init_net, dev) { - if (!dev->dn_ptr) - continue; - if (!dn_dev_islocal(dev, oldflp->saddr)) - continue; - if ((dev->flags & IFF_LOOPBACK) && - oldflp->daddr && - !dn_dev_islocal(dev, oldflp->daddr)) - continue; - - dev_out = dev; - break; - } - rcu_read_unlock(); - if (dev_out == NULL) - goto out; - dev_hold(dev_out); -source_ok: - ; - } - - /* No destination? Assume its local */ - if (!fld.daddr) { - fld.daddr = fld.saddr; - - if (dev_out) - dev_put(dev_out); - err = -EINVAL; - dev_out = init_net.loopback_dev; - if (!dev_out->dn_ptr) - goto out; - err = -EADDRNOTAVAIL; - dev_hold(dev_out); - if (!fld.daddr) { - fld.daddr = - fld.saddr = dnet_select_source(dev_out, 0, - RT_SCOPE_HOST); - if (!fld.daddr) - goto out; - } - fld.flowidn_oif = LOOPBACK_IFINDEX; - res.type = RTN_LOCAL; - goto make_route; - } - - if (decnet_debug_level & 16) - printk(KERN_DEBUG - "dn_route_output_slow: initial checks complete." - " dst=%04x src=%04x oif=%d try_hard=%d\n", - le16_to_cpu(fld.daddr), le16_to_cpu(fld.saddr), - fld.flowidn_oif, try_hard); - - /* - * N.B. If the kernel is compiled without router support then - * dn_fib_lookup() will evaluate to non-zero so this if () block - * will always be executed. - */ - err = -ESRCH; - if (try_hard || (err = dn_fib_lookup(&fld, &res)) != 0) { - struct dn_dev *dn_db; - if (err != -ESRCH) - goto out; - /* - * Here the fallback is basically the standard algorithm for - * routing in endnodes which is described in the DECnet routing - * docs - * - * If we are not trying hard, look in neighbour cache. - * The result is tested to ensure that if a specific output - * device/source address was requested, then we honour that - * here - */ - if (!try_hard) { - neigh = neigh_lookup_nodev(&dn_neigh_table, &init_net, &fld.daddr); - if (neigh) { - if ((oldflp->flowidn_oif && - (neigh->dev->ifindex != oldflp->flowidn_oif)) || - (oldflp->saddr && - (!dn_dev_islocal(neigh->dev, - oldflp->saddr)))) { - neigh_release(neigh); - neigh = NULL; - } else { - if (dev_out) - dev_put(dev_out); - if (dn_dev_islocal(neigh->dev, fld.daddr)) { - dev_out = init_net.loopback_dev; - res.type = RTN_LOCAL; - } else { - dev_out = neigh->dev; - } - dev_hold(dev_out); - goto select_source; - } - } - } - - /* Not there? Perhaps its a local address */ - if (dev_out == NULL) - dev_out = dn_dev_get_default(); - err = -ENODEV; - if (dev_out == NULL) - goto out; - dn_db = rcu_dereference_raw(dev_out->dn_ptr); - if (!dn_db) - goto e_inval; - /* Possible improvement - check all devices for local addr */ - if (dn_dev_islocal(dev_out, fld.daddr)) { - dev_put(dev_out); - dev_out = init_net.loopback_dev; - dev_hold(dev_out); - res.type = RTN_LOCAL; - goto select_source; - } - /* Not local either.... try sending it to the default router */ - neigh = neigh_clone(dn_db->router); - BUG_ON(neigh && neigh->dev != dev_out); - - /* Ok then, we assume its directly connected and move on */ -select_source: - if (neigh) - gateway = ((struct dn_neigh *)neigh)->addr; - if (gateway == 0) - gateway = fld.daddr; - if (fld.saddr == 0) { - fld.saddr = dnet_select_source(dev_out, gateway, - res.type == RTN_LOCAL ? - RT_SCOPE_HOST : - RT_SCOPE_LINK); - if (fld.saddr == 0 && res.type != RTN_LOCAL) - goto e_addr; - } - fld.flowidn_oif = dev_out->ifindex; - goto make_route; - } - free_res = 1; - - if (res.type == RTN_NAT) - goto e_inval; - - if (res.type == RTN_LOCAL) { - if (!fld.saddr) - fld.saddr = fld.daddr; - if (dev_out) - dev_put(dev_out); - dev_out = init_net.loopback_dev; - dev_hold(dev_out); - if (!dev_out->dn_ptr) - goto e_inval; - fld.flowidn_oif = dev_out->ifindex; - if (res.fi) - dn_fib_info_put(res.fi); - res.fi = NULL; - goto make_route; - } - - if (res.fi->fib_nhs > 1 && fld.flowidn_oif == 0) - dn_fib_select_multipath(&fld, &res); - - /* - * We could add some logic to deal with default routes here and - * get rid of some of the special casing above. - */ - - if (!fld.saddr) - fld.saddr = DN_FIB_RES_PREFSRC(res); - - if (dev_out) - dev_put(dev_out); - dev_out = DN_FIB_RES_DEV(res); - dev_hold(dev_out); - fld.flowidn_oif = dev_out->ifindex; - gateway = DN_FIB_RES_GW(res); - -make_route: - if (dev_out->flags & IFF_LOOPBACK) - flags |= RTCF_LOCAL; - - rt = dst_alloc(&dn_dst_ops, dev_out, 0, DST_OBSOLETE_NONE, 0); - if (rt == NULL) - goto e_nobufs; - - rt->dn_next = NULL; - memset(&rt->fld, 0, sizeof(rt->fld)); - rt->fld.saddr = oldflp->saddr; - rt->fld.daddr = oldflp->daddr; - rt->fld.flowidn_oif = oldflp->flowidn_oif; - rt->fld.flowidn_iif = 0; - rt->fld.flowidn_mark = oldflp->flowidn_mark; - - rt->rt_saddr = fld.saddr; - rt->rt_daddr = fld.daddr; - rt->rt_gateway = gateway ? gateway : fld.daddr; - rt->rt_local_src = fld.saddr; - - rt->rt_dst_map = fld.daddr; - rt->rt_src_map = fld.saddr; - - rt->n = neigh; - neigh = NULL; - - rt->dst.lastuse = jiffies; - rt->dst.output = dn_output; - rt->dst.input = dn_rt_bug; - rt->rt_flags = flags; - if (flags & RTCF_LOCAL) - rt->dst.input = dn_nsp_rx; - - err = dn_rt_set_next_hop(rt, &res); - if (err) - goto e_neighbour; - - hash = dn_hash(rt->fld.saddr, rt->fld.daddr); - /* dn_insert_route() increments dst->__refcnt */ - dn_insert_route(rt, hash, (struct dn_route **)pprt); - -done: - if (neigh) - neigh_release(neigh); - if (free_res) - dn_fib_res_put(&res); - if (dev_out) - dev_put(dev_out); -out: - return err; - -e_addr: - err = -EADDRNOTAVAIL; - goto done; -e_inval: - err = -EINVAL; - goto done; -e_nobufs: - err = -ENOBUFS; - goto done; -e_neighbour: - dst_release_immediate(&rt->dst); - goto e_nobufs; -} - - -/* - * N.B. The flags may be moved into the flowi at some future stage. - */ -static int __dn_route_output_key(struct dst_entry **pprt, const struct flowidn *flp, int flags) -{ - unsigned int hash = dn_hash(flp->saddr, flp->daddr); - struct dn_route *rt = NULL; - - if (!(flags & MSG_TRYHARD)) { - rcu_read_lock_bh(); - for (rt = rcu_dereference_bh(dn_rt_hash_table[hash].chain); rt; - rt = rcu_dereference_bh(rt->dn_next)) { - if ((flp->daddr == rt->fld.daddr) && - (flp->saddr == rt->fld.saddr) && - (flp->flowidn_mark == rt->fld.flowidn_mark) && - dn_is_output_route(rt) && - (rt->fld.flowidn_oif == flp->flowidn_oif)) { - dst_hold_and_use(&rt->dst, jiffies); - rcu_read_unlock_bh(); - *pprt = &rt->dst; - return 0; - } - } - rcu_read_unlock_bh(); - } - - return dn_route_output_slow(pprt, flp, flags); -} - -static int dn_route_output_key(struct dst_entry **pprt, struct flowidn *flp, int flags) -{ - int err; - - err = __dn_route_output_key(pprt, flp, flags); - if (err == 0 && flp->flowidn_proto) { - *pprt = xfrm_lookup(&init_net, *pprt, - flowidn_to_flowi(flp), NULL, 0); - if (IS_ERR(*pprt)) { - err = PTR_ERR(*pprt); - *pprt = NULL; - } - } - return err; -} - -int dn_route_output_sock(struct dst_entry __rcu **pprt, struct flowidn *fl, struct sock *sk, int flags) -{ - int err; - - err = __dn_route_output_key(pprt, fl, flags & MSG_TRYHARD); - if (err == 0 && fl->flowidn_proto) { - *pprt = xfrm_lookup(&init_net, *pprt, - flowidn_to_flowi(fl), sk, 0); - if (IS_ERR(*pprt)) { - err = PTR_ERR(*pprt); - *pprt = NULL; - } - } - return err; -} - -static int dn_route_input_slow(struct sk_buff *skb) -{ - struct dn_route *rt = NULL; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - struct net_device *in_dev = skb->dev; - struct net_device *out_dev = NULL; - struct dn_dev *dn_db; - struct neighbour *neigh = NULL; - unsigned int hash; - int flags = 0; - __le16 gateway = 0; - __le16 local_src = 0; - struct flowidn fld = { - .daddr = cb->dst, - .saddr = cb->src, - .flowidn_scope = RT_SCOPE_UNIVERSE, - .flowidn_mark = skb->mark, - .flowidn_iif = skb->dev->ifindex, - }; - struct dn_fib_res res = { .fi = NULL, .type = RTN_UNREACHABLE }; - int err = -EINVAL; - int free_res = 0; - - dev_hold(in_dev); - - if ((dn_db = rcu_dereference(in_dev->dn_ptr)) == NULL) - goto out; - - /* Zero source addresses are not allowed */ - if (fld.saddr == 0) - goto out; - - /* - * In this case we've just received a packet from a source - * outside ourselves pretending to come from us. We don't - * allow it any further to prevent routing loops, spoofing and - * other nasties. Loopback packets already have the dst attached - * so this only affects packets which have originated elsewhere. - */ - err = -ENOTUNIQ; - if (dn_dev_islocal(in_dev, cb->src)) - goto out; - - err = dn_fib_lookup(&fld, &res); - if (err) { - if (err != -ESRCH) - goto out; - /* - * Is the destination us ? - */ - if (!dn_dev_islocal(in_dev, cb->dst)) - goto e_inval; - - res.type = RTN_LOCAL; - } else { - __le16 src_map = fld.saddr; - free_res = 1; - - out_dev = DN_FIB_RES_DEV(res); - if (out_dev == NULL) { - net_crit_ratelimited("Bug in dn_route_input_slow() No output device\n"); - goto e_inval; - } - dev_hold(out_dev); - - if (res.r) - src_map = fld.saddr; /* no NAT support for now */ - - gateway = DN_FIB_RES_GW(res); - if (res.type == RTN_NAT) { - fld.daddr = dn_fib_rules_map_destination(fld.daddr, &res); - dn_fib_res_put(&res); - free_res = 0; - if (dn_fib_lookup(&fld, &res)) - goto e_inval; - free_res = 1; - if (res.type != RTN_UNICAST) - goto e_inval; - flags |= RTCF_DNAT; - gateway = fld.daddr; - } - fld.saddr = src_map; - } - - switch(res.type) { - case RTN_UNICAST: - /* - * Forwarding check here, we only check for forwarding - * being turned off, if you want to only forward intra - * area, its up to you to set the routing tables up - * correctly. - */ - if (dn_db->parms.forwarding == 0) - goto e_inval; - - if (res.fi->fib_nhs > 1 && fld.flowidn_oif == 0) - dn_fib_select_multipath(&fld, &res); - - /* - * Check for out_dev == in_dev. We use the RTCF_DOREDIRECT - * flag as a hint to set the intra-ethernet bit when - * forwarding. If we've got NAT in operation, we don't do - * this optimisation. - */ - if (out_dev == in_dev && !(flags & RTCF_NAT)) - flags |= RTCF_DOREDIRECT; - - local_src = DN_FIB_RES_PREFSRC(res); - - case RTN_BLACKHOLE: - case RTN_UNREACHABLE: - break; - case RTN_LOCAL: - flags |= RTCF_LOCAL; - fld.saddr = cb->dst; - fld.daddr = cb->src; - - /* Routing tables gave us a gateway */ - if (gateway) - goto make_route; - - /* Packet was intra-ethernet, so we know its on-link */ - if (cb->rt_flags & DN_RT_F_IE) { - gateway = cb->src; - goto make_route; - } - - /* Use the default router if there is one */ - neigh = neigh_clone(dn_db->router); - if (neigh) { - gateway = ((struct dn_neigh *)neigh)->addr; - goto make_route; - } - - /* Close eyes and pray */ - gateway = cb->src; - goto make_route; - default: - goto e_inval; - } - -make_route: - rt = dst_alloc(&dn_dst_ops, out_dev, 1, DST_OBSOLETE_NONE, 0); - if (rt == NULL) - goto e_nobufs; - - rt->dn_next = NULL; - memset(&rt->fld, 0, sizeof(rt->fld)); - rt->rt_saddr = fld.saddr; - rt->rt_daddr = fld.daddr; - rt->rt_gateway = fld.daddr; - if (gateway) - rt->rt_gateway = gateway; - rt->rt_local_src = local_src ? local_src : rt->rt_saddr; - - rt->rt_dst_map = fld.daddr; - rt->rt_src_map = fld.saddr; - - rt->fld.saddr = cb->src; - rt->fld.daddr = cb->dst; - rt->fld.flowidn_oif = 0; - rt->fld.flowidn_iif = in_dev->ifindex; - rt->fld.flowidn_mark = fld.flowidn_mark; - - rt->n = neigh; - rt->dst.lastuse = jiffies; - rt->dst.output = dn_rt_bug_out; - switch (res.type) { - case RTN_UNICAST: - rt->dst.input = dn_forward; - break; - case RTN_LOCAL: - rt->dst.output = dn_output; - rt->dst.input = dn_nsp_rx; - rt->dst.dev = in_dev; - flags |= RTCF_LOCAL; - break; - default: - case RTN_UNREACHABLE: - case RTN_BLACKHOLE: - rt->dst.input = dst_discard; - } - rt->rt_flags = flags; - - err = dn_rt_set_next_hop(rt, &res); - if (err) - goto e_neighbour; - - hash = dn_hash(rt->fld.saddr, rt->fld.daddr); - /* dn_insert_route() increments dst->__refcnt */ - dn_insert_route(rt, hash, &rt); - skb_dst_set(skb, &rt->dst); - -done: - if (neigh) - neigh_release(neigh); - if (free_res) - dn_fib_res_put(&res); - dev_put(in_dev); - if (out_dev) - dev_put(out_dev); -out: - return err; - -e_inval: - err = -EINVAL; - goto done; - -e_nobufs: - err = -ENOBUFS; - goto done; - -e_neighbour: - dst_release_immediate(&rt->dst); - goto done; -} - -static int dn_route_input(struct sk_buff *skb) -{ - struct dn_route *rt; - struct dn_skb_cb *cb = DN_SKB_CB(skb); - unsigned int hash = dn_hash(cb->src, cb->dst); - - if (skb_dst(skb)) - return 0; - - rcu_read_lock(); - for(rt = rcu_dereference(dn_rt_hash_table[hash].chain); rt != NULL; - rt = rcu_dereference(rt->dn_next)) { - if ((rt->fld.saddr == cb->src) && - (rt->fld.daddr == cb->dst) && - (rt->fld.flowidn_oif == 0) && - (rt->fld.flowidn_mark == skb->mark) && - (rt->fld.flowidn_iif == cb->iif)) { - dst_hold_and_use(&rt->dst, jiffies); - rcu_read_unlock(); - skb_dst_set(skb, (struct dst_entry *)rt); - return 0; - } - } - rcu_read_unlock(); - - return dn_route_input_slow(skb); -} - -static int dn_rt_fill_info(struct sk_buff *skb, u32 portid, u32 seq, - int event, int nowait, unsigned int flags) -{ - struct dn_route *rt = (struct dn_route *)skb_dst(skb); - struct rtmsg *r; - struct nlmsghdr *nlh; - long expires; - - nlh = nlmsg_put(skb, portid, seq, event, sizeof(*r), flags); - if (!nlh) - return -EMSGSIZE; - - r = nlmsg_data(nlh); - r->rtm_family = AF_DECnet; - r->rtm_dst_len = 16; - r->rtm_src_len = 0; - r->rtm_tos = 0; - r->rtm_table = RT_TABLE_MAIN; - r->rtm_type = rt->rt_type; - r->rtm_flags = (rt->rt_flags & ~0xFFFF) | RTM_F_CLONED; - r->rtm_scope = RT_SCOPE_UNIVERSE; - r->rtm_protocol = RTPROT_UNSPEC; - - if (rt->rt_flags & RTCF_NOTIFY) - r->rtm_flags |= RTM_F_NOTIFY; - - if (nla_put_u32(skb, RTA_TABLE, RT_TABLE_MAIN) < 0 || - nla_put_le16(skb, RTA_DST, rt->rt_daddr) < 0) - goto errout; - - if (rt->fld.saddr) { - r->rtm_src_len = 16; - if (nla_put_le16(skb, RTA_SRC, rt->fld.saddr) < 0) - goto errout; - } - if (rt->dst.dev && - nla_put_u32(skb, RTA_OIF, rt->dst.dev->ifindex) < 0) - goto errout; - - /* - * Note to self - change this if input routes reverse direction when - * they deal only with inputs and not with replies like they do - * currently. - */ - if (nla_put_le16(skb, RTA_PREFSRC, rt->rt_local_src) < 0) - goto errout; - - if (rt->rt_daddr != rt->rt_gateway && - nla_put_le16(skb, RTA_GATEWAY, rt->rt_gateway) < 0) - goto errout; - - if (rtnetlink_put_metrics(skb, dst_metrics_ptr(&rt->dst)) < 0) - goto errout; - - expires = rt->dst.expires ? rt->dst.expires - jiffies : 0; - if (rtnl_put_cacheinfo(skb, &rt->dst, 0, expires, - rt->dst.error) < 0) - goto errout; - - if (dn_is_input_route(rt) && - nla_put_u32(skb, RTA_IIF, rt->fld.flowidn_iif) < 0) - goto errout; - - nlmsg_end(skb, nlh); - return 0; - -errout: - nlmsg_cancel(skb, nlh); - return -EMSGSIZE; -} - -const struct nla_policy rtm_dn_policy[RTA_MAX + 1] = { - [RTA_DST] = { .type = NLA_U16 }, - [RTA_SRC] = { .type = NLA_U16 }, - [RTA_IIF] = { .type = NLA_U32 }, - [RTA_OIF] = { .type = NLA_U32 }, - [RTA_GATEWAY] = { .type = NLA_U16 }, - [RTA_PRIORITY] = { .type = NLA_U32 }, - [RTA_PREFSRC] = { .type = NLA_U16 }, - [RTA_METRICS] = { .type = NLA_NESTED }, - [RTA_MULTIPATH] = { .type = NLA_NESTED }, - [RTA_TABLE] = { .type = NLA_U32 }, - [RTA_MARK] = { .type = NLA_U32 }, -}; - -/* - * This is called by both endnodes and routers now. - */ -static int dn_cache_getroute(struct sk_buff *in_skb, struct nlmsghdr *nlh, - struct netlink_ext_ack *extack) -{ - struct net *net = sock_net(in_skb->sk); - struct rtmsg *rtm = nlmsg_data(nlh); - struct dn_route *rt = NULL; - struct dn_skb_cb *cb; - int err; - struct sk_buff *skb; - struct flowidn fld; - struct nlattr *tb[RTA_MAX+1]; - - if (!net_eq(net, &init_net)) - return -EINVAL; - - err = nlmsg_parse_deprecated(nlh, sizeof(*rtm), tb, RTA_MAX, - rtm_dn_policy, extack); - if (err < 0) - return err; - - memset(&fld, 0, sizeof(fld)); - fld.flowidn_proto = DNPROTO_NSP; - - skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); - if (skb == NULL) - return -ENOBUFS; - skb_reset_mac_header(skb); - cb = DN_SKB_CB(skb); - - if (tb[RTA_SRC]) - fld.saddr = nla_get_le16(tb[RTA_SRC]); - - if (tb[RTA_DST]) - fld.daddr = nla_get_le16(tb[RTA_DST]); - - if (tb[RTA_IIF]) - fld.flowidn_iif = nla_get_u32(tb[RTA_IIF]); - - if (fld.flowidn_iif) { - struct net_device *dev; - dev = __dev_get_by_index(&init_net, fld.flowidn_iif); - if (!dev || !dev->dn_ptr) { - kfree_skb(skb); - return -ENODEV; - } - skb->protocol = htons(ETH_P_DNA_RT); - skb->dev = dev; - cb->src = fld.saddr; - cb->dst = fld.daddr; - local_bh_disable(); - err = dn_route_input(skb); - local_bh_enable(); - memset(cb, 0, sizeof(struct dn_skb_cb)); - rt = (struct dn_route *)skb_dst(skb); - if (!err && -rt->dst.error) - err = rt->dst.error; - } else { - if (tb[RTA_OIF]) - fld.flowidn_oif = nla_get_u32(tb[RTA_OIF]); - - err = dn_route_output_key((struct dst_entry **)&rt, &fld, 0); - } - - skb->dev = NULL; - if (err) - goto out_free; - skb_dst_set(skb, &rt->dst); - if (rtm->rtm_flags & RTM_F_NOTIFY) - rt->rt_flags |= RTCF_NOTIFY; - - err = dn_rt_fill_info(skb, NETLINK_CB(in_skb).portid, nlh->nlmsg_seq, RTM_NEWROUTE, 0, 0); - if (err < 0) { - err = -EMSGSIZE; - goto out_free; - } - - return rtnl_unicast(skb, &init_net, NETLINK_CB(in_skb).portid); - -out_free: - kfree_skb(skb); - return err; -} - -/* - * For routers, this is called from dn_fib_dump, but for endnodes its - * called directly from the rtnetlink dispatch table. - */ -int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb) -{ - struct net *net = sock_net(skb->sk); - struct dn_route *rt; - int h, s_h; - int idx, s_idx; - struct rtmsg *rtm; - - if (!net_eq(net, &init_net)) - return 0; - - if (nlmsg_len(cb->nlh) < sizeof(struct rtmsg)) - return -EINVAL; - - rtm = nlmsg_data(cb->nlh); - if (!(rtm->rtm_flags & RTM_F_CLONED)) - return 0; - - s_h = cb->args[0]; - s_idx = idx = cb->args[1]; - for(h = 0; h <= dn_rt_hash_mask; h++) { - if (h < s_h) - continue; - if (h > s_h) - s_idx = 0; - rcu_read_lock_bh(); - for(rt = rcu_dereference_bh(dn_rt_hash_table[h].chain), idx = 0; - rt; - rt = rcu_dereference_bh(rt->dn_next), idx++) { - if (idx < s_idx) - continue; - skb_dst_set(skb, dst_clone(&rt->dst)); - if (dn_rt_fill_info(skb, NETLINK_CB(cb->skb).portid, - cb->nlh->nlmsg_seq, RTM_NEWROUTE, - 1, NLM_F_MULTI) < 0) { - skb_dst_drop(skb); - rcu_read_unlock_bh(); - goto done; - } - skb_dst_drop(skb); - } - rcu_read_unlock_bh(); - } - -done: - cb->args[0] = h; - cb->args[1] = idx; - return skb->len; -} - -#ifdef CONFIG_PROC_FS -struct dn_rt_cache_iter_state { - int bucket; -}; - -static struct dn_route *dn_rt_cache_get_first(struct seq_file *seq) -{ - struct dn_route *rt = NULL; - struct dn_rt_cache_iter_state *s = seq->private; - - for(s->bucket = dn_rt_hash_mask; s->bucket >= 0; --s->bucket) { - rcu_read_lock_bh(); - rt = rcu_dereference_bh(dn_rt_hash_table[s->bucket].chain); - if (rt) - break; - rcu_read_unlock_bh(); - } - return rt; -} - -static struct dn_route *dn_rt_cache_get_next(struct seq_file *seq, struct dn_route *rt) -{ - struct dn_rt_cache_iter_state *s = seq->private; - - rt = rcu_dereference_bh(rt->dn_next); - while (!rt) { - rcu_read_unlock_bh(); - if (--s->bucket < 0) - break; - rcu_read_lock_bh(); - rt = rcu_dereference_bh(dn_rt_hash_table[s->bucket].chain); - } - return rt; -} - -static void *dn_rt_cache_seq_start(struct seq_file *seq, loff_t *pos) -{ - struct dn_route *rt = dn_rt_cache_get_first(seq); - - if (rt) { - while(*pos && (rt = dn_rt_cache_get_next(seq, rt))) - --*pos; - } - return *pos ? NULL : rt; -} - -static void *dn_rt_cache_seq_next(struct seq_file *seq, void *v, loff_t *pos) -{ - struct dn_route *rt = dn_rt_cache_get_next(seq, v); - ++*pos; - return rt; -} - -static void dn_rt_cache_seq_stop(struct seq_file *seq, void *v) -{ - if (v) - rcu_read_unlock_bh(); -} - -static int dn_rt_cache_seq_show(struct seq_file *seq, void *v) -{ - struct dn_route *rt = v; - char buf1[DN_ASCBUF_LEN], buf2[DN_ASCBUF_LEN]; - - seq_printf(seq, "%-8s %-7s %-7s %04d %04d %04d\n", - rt->dst.dev ? rt->dst.dev->name : "*", - dn_addr2asc(le16_to_cpu(rt->rt_daddr), buf1), - dn_addr2asc(le16_to_cpu(rt->rt_saddr), buf2), - atomic_read(&rt->dst.__refcnt), - rt->dst.__use, 0); - return 0; -} - -static const struct seq_operations dn_rt_cache_seq_ops = { - .start = dn_rt_cache_seq_start, - .next = dn_rt_cache_seq_next, - .stop = dn_rt_cache_seq_stop, - .show = dn_rt_cache_seq_show, -}; -#endif /* CONFIG_PROC_FS */ - -void __init dn_route_init(void) -{ - int i, goal, order; - - dn_dst_ops.kmem_cachep = - kmem_cache_create("dn_dst_cache", sizeof(struct dn_route), 0, - SLAB_HWCACHE_ALIGN|SLAB_PANIC, NULL); - dst_entries_init(&dn_dst_ops); - timer_setup(&dn_route_timer, dn_dst_check_expire, 0); - dn_route_timer.expires = jiffies + decnet_dst_gc_interval * HZ; - add_timer(&dn_route_timer); - - goal = totalram_pages() >> (26 - PAGE_SHIFT); - - for(order = 0; (1UL << order) < goal; order++) - /* NOTHING */; - - /* - * Only want 1024 entries max, since the table is very, very unlikely - * to be larger than that. - */ - while(order && ((((1UL << order) * PAGE_SIZE) / - sizeof(struct dn_rt_hash_bucket)) >= 2048)) - order--; - - do { - dn_rt_hash_mask = (1UL << order) * PAGE_SIZE / - sizeof(struct dn_rt_hash_bucket); - while(dn_rt_hash_mask & (dn_rt_hash_mask - 1)) - dn_rt_hash_mask--; - dn_rt_hash_table = (struct dn_rt_hash_bucket *) - __get_free_pages(GFP_ATOMIC, order); - } while (dn_rt_hash_table == NULL && --order > 0); - - if (!dn_rt_hash_table) - panic("Failed to allocate DECnet route cache hash table\n"); - - printk(KERN_INFO - "DECnet: Routing cache hash table of %u buckets, %ldKbytes\n", - dn_rt_hash_mask, - (long)(dn_rt_hash_mask*sizeof(struct dn_rt_hash_bucket))/1024); - - dn_rt_hash_mask--; - for(i = 0; i <= dn_rt_hash_mask; i++) { - spin_lock_init(&dn_rt_hash_table[i].lock); - dn_rt_hash_table[i].chain = NULL; - } - - dn_dst_ops.gc_thresh = (dn_rt_hash_mask + 1); - - proc_create_seq_private("decnet_cache", 0444, init_net.proc_net, - &dn_rt_cache_seq_ops, - sizeof(struct dn_rt_cache_iter_state), NULL); - -#ifdef CONFIG_DECNET_ROUTER - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_GETROUTE, - dn_cache_getroute, dn_fib_dump, 0); -#else - rtnl_register_module(THIS_MODULE, PF_DECnet, RTM_GETROUTE, - dn_cache_getroute, dn_cache_dump, 0); -#endif -} - -void __exit dn_route_cleanup(void) -{ - del_timer(&dn_route_timer); - dn_run_flush(NULL); - - remove_proc_entry("decnet_cache", init_net.proc_net); - dst_entries_destroy(&dn_dst_ops); -} diff --git a/net/decnet/dn_rules.c b/net/decnet/dn_rules.c deleted file mode 100644 index 4a4e3c17740c..000000000000 --- a/net/decnet/dn_rules.c +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Routing Forwarding Information Base (Rules) - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * Mostly copied from Alexey Kuznetsov's ipv4/fib_rules.c - * - * - * Changes: - * Steve Whitehouse <steve(a)chygwyn.com> - * Updated for Thomas Graf's generic rules - * - */ -#include <linux/net.h> -#include <linux/init.h> -#include <linux/netlink.h> -#include <linux/rtnetlink.h> -#include <linux/netdevice.h> -#include <linux/spinlock.h> -#include <linux/list.h> -#include <linux/rcupdate.h> -#include <linux/export.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/fib_rules.h> -#include <net/dn.h> -#include <net/dn_fib.h> -#include <net/dn_neigh.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> - -static struct fib_rules_ops *dn_fib_rules_ops; - -struct dn_fib_rule -{ - struct fib_rule common; - unsigned char dst_len; - unsigned char src_len; - __le16 src; - __le16 srcmask; - __le16 dst; - __le16 dstmask; - __le16 srcmap; - u8 flags; -}; - - -int dn_fib_lookup(struct flowidn *flp, struct dn_fib_res *res) -{ - struct fib_lookup_arg arg = { - .result = res, - }; - int err; - - err = fib_rules_lookup(dn_fib_rules_ops, - flowidn_to_flowi(flp), 0, &arg); - res->r = arg.rule; - - return err; -} - -static int dn_fib_rule_action(struct fib_rule *rule, struct flowi *flp, - int flags, struct fib_lookup_arg *arg) -{ - struct flowidn *fld = &flp->u.dn; - int err = -EAGAIN; - struct dn_fib_table *tbl; - - switch(rule->action) { - case FR_ACT_TO_TBL: - break; - - case FR_ACT_UNREACHABLE: - err = -ENETUNREACH; - goto errout; - - case FR_ACT_PROHIBIT: - err = -EACCES; - goto errout; - - case FR_ACT_BLACKHOLE: - default: - err = -EINVAL; - goto errout; - } - - tbl = dn_fib_get_table(rule->table, 0); - if (tbl == NULL) - goto errout; - - err = tbl->lookup(tbl, fld, (struct dn_fib_res *)arg->result); - if (err > 0) - err = -EAGAIN; -errout: - return err; -} - -static const struct nla_policy dn_fib_rule_policy[FRA_MAX+1] = { - FRA_GENERIC_POLICY, -}; - -static int dn_fib_rule_match(struct fib_rule *rule, struct flowi *fl, int flags) -{ - struct dn_fib_rule *r = (struct dn_fib_rule *)rule; - struct flowidn *fld = &fl->u.dn; - __le16 daddr = fld->daddr; - __le16 saddr = fld->saddr; - - if (((saddr ^ r->src) & r->srcmask) || - ((daddr ^ r->dst) & r->dstmask)) - return 0; - - return 1; -} - -static int dn_fib_rule_configure(struct fib_rule *rule, struct sk_buff *skb, - struct fib_rule_hdr *frh, - struct nlattr **tb, - struct netlink_ext_ack *extack) -{ - int err = -EINVAL; - struct dn_fib_rule *r = (struct dn_fib_rule *)rule; - - if (frh->tos) { - NL_SET_ERR_MSG(extack, "Invalid tos value"); - goto errout; - } - - if (rule->table == RT_TABLE_UNSPEC) { - if (rule->action == FR_ACT_TO_TBL) { - struct dn_fib_table *table; - - table = dn_fib_empty_table(); - if (table == NULL) { - err = -ENOBUFS; - goto errout; - } - - rule->table = table->n; - } - } - - if (frh->src_len) - r->src = nla_get_le16(tb[FRA_SRC]); - - if (frh->dst_len) - r->dst = nla_get_le16(tb[FRA_DST]); - - r->src_len = frh->src_len; - r->srcmask = dnet_make_mask(r->src_len); - r->dst_len = frh->dst_len; - r->dstmask = dnet_make_mask(r->dst_len); - err = 0; -errout: - return err; -} - -static int dn_fib_rule_compare(struct fib_rule *rule, struct fib_rule_hdr *frh, - struct nlattr **tb) -{ - struct dn_fib_rule *r = (struct dn_fib_rule *)rule; - - if (frh->src_len && (r->src_len != frh->src_len)) - return 0; - - if (frh->dst_len && (r->dst_len != frh->dst_len)) - return 0; - - if (frh->src_len && (r->src != nla_get_le16(tb[FRA_SRC]))) - return 0; - - if (frh->dst_len && (r->dst != nla_get_le16(tb[FRA_DST]))) - return 0; - - return 1; -} - -unsigned int dnet_addr_type(__le16 addr) -{ - struct flowidn fld = { .daddr = addr }; - struct dn_fib_res res; - unsigned int ret = RTN_UNICAST; - struct dn_fib_table *tb = dn_fib_get_table(RT_TABLE_LOCAL, 0); - - res.r = NULL; - - if (tb) { - if (!tb->lookup(tb, &fld, &res)) { - ret = res.type; - dn_fib_res_put(&res); - } - } - return ret; -} - -static int dn_fib_rule_fill(struct fib_rule *rule, struct sk_buff *skb, - struct fib_rule_hdr *frh) -{ - struct dn_fib_rule *r = (struct dn_fib_rule *)rule; - - frh->dst_len = r->dst_len; - frh->src_len = r->src_len; - frh->tos = 0; - - if ((r->dst_len && - nla_put_le16(skb, FRA_DST, r->dst)) || - (r->src_len && - nla_put_le16(skb, FRA_SRC, r->src))) - goto nla_put_failure; - return 0; - -nla_put_failure: - return -ENOBUFS; -} - -static void dn_fib_rule_flush_cache(struct fib_rules_ops *ops) -{ - dn_rt_cache_flush(-1); -} - -static const struct fib_rules_ops __net_initconst dn_fib_rules_ops_template = { - .family = AF_DECnet, - .rule_size = sizeof(struct dn_fib_rule), - .addr_size = sizeof(u16), - .action = dn_fib_rule_action, - .match = dn_fib_rule_match, - .configure = dn_fib_rule_configure, - .compare = dn_fib_rule_compare, - .fill = dn_fib_rule_fill, - .flush_cache = dn_fib_rule_flush_cache, - .nlgroup = RTNLGRP_DECnet_RULE, - .policy = dn_fib_rule_policy, - .owner = THIS_MODULE, - .fro_net = &init_net, -}; - -void __init dn_fib_rules_init(void) -{ - dn_fib_rules_ops = - fib_rules_register(&dn_fib_rules_ops_template, &init_net); - BUG_ON(IS_ERR(dn_fib_rules_ops)); - BUG_ON(fib_default_rule_add(dn_fib_rules_ops, 0x7fff, - RT_TABLE_MAIN, 0)); -} - -void __exit dn_fib_rules_cleanup(void) -{ - rtnl_lock(); - fib_rules_unregister(dn_fib_rules_ops); - rtnl_unlock(); - rcu_barrier(); -} diff --git a/net/decnet/dn_table.c b/net/decnet/dn_table.c deleted file mode 100644 index 4086f9c746af..000000000000 --- a/net/decnet/dn_table.c +++ /dev/null @@ -1,929 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Routing Forwarding Information Base (Routing Tables) - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * Mostly copied from the IPv4 routing code - * - * - * Changes: - * - */ -#include <linux/string.h> -#include <linux/net.h> -#include <linux/socket.h> -#include <linux/slab.h> -#include <linux/sockios.h> -#include <linux/init.h> -#include <linux/skbuff.h> -#include <linux/rtnetlink.h> -#include <linux/proc_fs.h> -#include <linux/netdevice.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <linux/atomic.h> -#include <linux/uaccess.h> -#include <linux/route.h> /* RTF_xxx */ -#include <net/neighbour.h> -#include <net/netlink.h> -#include <net/tcp.h> -#include <net/dst.h> -#include <net/flow.h> -#include <net/fib_rules.h> -#include <net/dn.h> -#include <net/dn_route.h> -#include <net/dn_fib.h> -#include <net/dn_neigh.h> -#include <net/dn_dev.h> - -struct dn_zone -{ - struct dn_zone *dz_next; - struct dn_fib_node **dz_hash; - int dz_nent; - int dz_divisor; - u32 dz_hashmask; -#define DZ_HASHMASK(dz) ((dz)->dz_hashmask) - int dz_order; - __le16 dz_mask; -#define DZ_MASK(dz) ((dz)->dz_mask) -}; - -struct dn_hash -{ - struct dn_zone *dh_zones[17]; - struct dn_zone *dh_zone_list; -}; - -#define dz_key_0(key) ((key).datum = 0) - -#define for_nexthops(fi) { int nhsel; const struct dn_fib_nh *nh;\ - for(nhsel = 0, nh = (fi)->fib_nh; nhsel < (fi)->fib_nhs; nh++, nhsel++) - -#define endfor_nexthops(fi) } - -#define DN_MAX_DIVISOR 1024 -#define DN_S_ZOMBIE 1 -#define DN_S_ACCESSED 2 - -#define DN_FIB_SCAN(f, fp) \ -for( ; ((f) = *(fp)) != NULL; (fp) = &(f)->fn_next) - -#define DN_FIB_SCAN_KEY(f, fp, key) \ -for( ; ((f) = *(fp)) != NULL && dn_key_eq((f)->fn_key, (key)); (fp) = &(f)->fn_next) - -#define RT_TABLE_MIN 1 -#define DN_FIB_TABLE_HASHSZ 256 -static struct hlist_head dn_fib_table_hash[DN_FIB_TABLE_HASHSZ]; -static DEFINE_RWLOCK(dn_fib_tables_lock); - -static struct kmem_cache *dn_hash_kmem __read_mostly; -static int dn_fib_hash_zombies; - -static inline dn_fib_idx_t dn_hash(dn_fib_key_t key, struct dn_zone *dz) -{ - u16 h = le16_to_cpu(key.datum)>>(16 - dz->dz_order); - h ^= (h >> 10); - h ^= (h >> 6); - h &= DZ_HASHMASK(dz); - return *(dn_fib_idx_t *)&h; -} - -static inline dn_fib_key_t dz_key(__le16 dst, struct dn_zone *dz) -{ - dn_fib_key_t k; - k.datum = dst & DZ_MASK(dz); - return k; -} - -static inline struct dn_fib_node **dn_chain_p(dn_fib_key_t key, struct dn_zone *dz) -{ - return &dz->dz_hash[dn_hash(key, dz).datum]; -} - -static inline struct dn_fib_node *dz_chain(dn_fib_key_t key, struct dn_zone *dz) -{ - return dz->dz_hash[dn_hash(key, dz).datum]; -} - -static inline int dn_key_eq(dn_fib_key_t a, dn_fib_key_t b) -{ - return a.datum == b.datum; -} - -static inline int dn_key_leq(dn_fib_key_t a, dn_fib_key_t b) -{ - return a.datum <= b.datum; -} - -static inline void dn_rebuild_zone(struct dn_zone *dz, - struct dn_fib_node **old_ht, - int old_divisor) -{ - struct dn_fib_node *f, **fp, *next; - int i; - - for(i = 0; i < old_divisor; i++) { - for(f = old_ht[i]; f; f = next) { - next = f->fn_next; - for(fp = dn_chain_p(f->fn_key, dz); - *fp && dn_key_leq((*fp)->fn_key, f->fn_key); - fp = &(*fp)->fn_next) - /* NOTHING */; - f->fn_next = *fp; - *fp = f; - } - } -} - -static void dn_rehash_zone(struct dn_zone *dz) -{ - struct dn_fib_node **ht, **old_ht; - int old_divisor, new_divisor; - u32 new_hashmask; - - old_divisor = dz->dz_divisor; - - switch (old_divisor) { - case 16: - new_divisor = 256; - new_hashmask = 0xFF; - break; - default: - printk(KERN_DEBUG "DECnet: dn_rehash_zone: BUG! %d\n", - old_divisor); - fallthrough; - case 256: - new_divisor = 1024; - new_hashmask = 0x3FF; - break; - } - - ht = kcalloc(new_divisor, sizeof(struct dn_fib_node*), GFP_KERNEL); - if (ht == NULL) - return; - - write_lock_bh(&dn_fib_tables_lock); - old_ht = dz->dz_hash; - dz->dz_hash = ht; - dz->dz_hashmask = new_hashmask; - dz->dz_divisor = new_divisor; - dn_rebuild_zone(dz, old_ht, old_divisor); - write_unlock_bh(&dn_fib_tables_lock); - kfree(old_ht); -} - -static void dn_free_node(struct dn_fib_node *f) -{ - dn_fib_release_info(DN_FIB_INFO(f)); - kmem_cache_free(dn_hash_kmem, f); -} - - -static struct dn_zone *dn_new_zone(struct dn_hash *table, int z) -{ - int i; - struct dn_zone *dz = kzalloc(sizeof(struct dn_zone), GFP_KERNEL); - if (!dz) - return NULL; - - if (z) { - dz->dz_divisor = 16; - dz->dz_hashmask = 0x0F; - } else { - dz->dz_divisor = 1; - dz->dz_hashmask = 0; - } - - dz->dz_hash = kcalloc(dz->dz_divisor, sizeof(struct dn_fib_node *), GFP_KERNEL); - if (!dz->dz_hash) { - kfree(dz); - return NULL; - } - - dz->dz_order = z; - dz->dz_mask = dnet_make_mask(z); - - for(i = z + 1; i <= 16; i++) - if (table->dh_zones[i]) - break; - - write_lock_bh(&dn_fib_tables_lock); - if (i>16) { - dz->dz_next = table->dh_zone_list; - table->dh_zone_list = dz; - } else { - dz->dz_next = table->dh_zones[i]->dz_next; - table->dh_zones[i]->dz_next = dz; - } - table->dh_zones[z] = dz; - write_unlock_bh(&dn_fib_tables_lock); - return dz; -} - - -static int dn_fib_nh_match(struct rtmsg *r, struct nlmsghdr *nlh, struct nlattr *attrs[], struct dn_fib_info *fi) -{ - struct rtnexthop *nhp; - int nhlen; - - if (attrs[RTA_PRIORITY] && - nla_get_u32(attrs[RTA_PRIORITY]) != fi->fib_priority) - return 1; - - if (attrs[RTA_OIF] || attrs[RTA_GATEWAY]) { - if ((!attrs[RTA_OIF] || nla_get_u32(attrs[RTA_OIF]) == fi->fib_nh->nh_oif) && - (!attrs[RTA_GATEWAY] || nla_get_le16(attrs[RTA_GATEWAY]) != fi->fib_nh->nh_gw)) - return 0; - return 1; - } - - if (!attrs[RTA_MULTIPATH]) - return 0; - - nhp = nla_data(attrs[RTA_MULTIPATH]); - nhlen = nla_len(attrs[RTA_MULTIPATH]); - - for_nexthops(fi) { - int attrlen = nhlen - sizeof(struct rtnexthop); - __le16 gw; - - if (attrlen < 0 || (nhlen -= nhp->rtnh_len) < 0) - return -EINVAL; - if (nhp->rtnh_ifindex && nhp->rtnh_ifindex != nh->nh_oif) - return 1; - if (attrlen) { - struct nlattr *gw_attr; - - gw_attr = nla_find((struct nlattr *) (nhp + 1), attrlen, RTA_GATEWAY); - gw = gw_attr ? nla_get_le16(gw_attr) : 0; - - if (gw && gw != nh->nh_gw) - return 1; - } - nhp = RTNH_NEXT(nhp); - } endfor_nexthops(fi); - - return 0; -} - -static inline size_t dn_fib_nlmsg_size(struct dn_fib_info *fi) -{ - size_t payload = NLMSG_ALIGN(sizeof(struct rtmsg)) - + nla_total_size(4) /* RTA_TABLE */ - + nla_total_size(2) /* RTA_DST */ - + nla_total_size(4) /* RTA_PRIORITY */ - + nla_total_size(TCP_CA_NAME_MAX); /* RTAX_CC_ALGO */ - - /* space for nested metrics */ - payload += nla_total_size((RTAX_MAX * nla_total_size(4))); - - if (fi->fib_nhs) { - /* Also handles the special case fib_nhs == 1 */ - - /* each nexthop is packed in an attribute */ - size_t nhsize = nla_total_size(sizeof(struct rtnexthop)); - - /* may contain a gateway attribute */ - nhsize += nla_total_size(4); - - /* all nexthops are packed in a nested attribute */ - payload += nla_total_size(fi->fib_nhs * nhsize); - } - - return payload; -} - -static int dn_fib_dump_info(struct sk_buff *skb, u32 portid, u32 seq, int event, - u32 tb_id, u8 type, u8 scope, void *dst, int dst_len, - struct dn_fib_info *fi, unsigned int flags) -{ - struct rtmsg *rtm; - struct nlmsghdr *nlh; - - nlh = nlmsg_put(skb, portid, seq, event, sizeof(*rtm), flags); - if (!nlh) - return -EMSGSIZE; - - rtm = nlmsg_data(nlh); - rtm->rtm_family = AF_DECnet; - rtm->rtm_dst_len = dst_len; - rtm->rtm_src_len = 0; - rtm->rtm_tos = 0; - rtm->rtm_table = tb_id; - rtm->rtm_flags = fi->fib_flags; - rtm->rtm_scope = scope; - rtm->rtm_type = type; - rtm->rtm_protocol = fi->fib_protocol; - - if (nla_put_u32(skb, RTA_TABLE, tb_id) < 0) - goto errout; - - if (rtm->rtm_dst_len && - nla_put(skb, RTA_DST, 2, dst) < 0) - goto errout; - - if (fi->fib_priority && - nla_put_u32(skb, RTA_PRIORITY, fi->fib_priority) < 0) - goto errout; - - if (rtnetlink_put_metrics(skb, fi->fib_metrics) < 0) - goto errout; - - if (fi->fib_nhs == 1) { - if (fi->fib_nh->nh_gw && - nla_put_le16(skb, RTA_GATEWAY, fi->fib_nh->nh_gw) < 0) - goto errout; - - if (fi->fib_nh->nh_oif && - nla_put_u32(skb, RTA_OIF, fi->fib_nh->nh_oif) < 0) - goto errout; - } - - if (fi->fib_nhs > 1) { - struct rtnexthop *nhp; - struct nlattr *mp_head; - - mp_head = nla_nest_start_noflag(skb, RTA_MULTIPATH); - if (!mp_head) - goto errout; - - for_nexthops(fi) { - if (!(nhp = nla_reserve_nohdr(skb, sizeof(*nhp)))) - goto errout; - - nhp->rtnh_flags = nh->nh_flags & 0xFF; - nhp->rtnh_hops = nh->nh_weight - 1; - nhp->rtnh_ifindex = nh->nh_oif; - - if (nh->nh_gw && - nla_put_le16(skb, RTA_GATEWAY, nh->nh_gw) < 0) - goto errout; - - nhp->rtnh_len = skb_tail_pointer(skb) - (unsigned char *)nhp; - } endfor_nexthops(fi); - - nla_nest_end(skb, mp_head); - } - - nlmsg_end(skb, nlh); - return 0; - -errout: - nlmsg_cancel(skb, nlh); - return -EMSGSIZE; -} - - -static void dn_rtmsg_fib(int event, struct dn_fib_node *f, int z, u32 tb_id, - struct nlmsghdr *nlh, struct netlink_skb_parms *req) -{ - struct sk_buff *skb; - u32 portid = req ? req->portid : 0; - int err = -ENOBUFS; - - skb = nlmsg_new(dn_fib_nlmsg_size(DN_FIB_INFO(f)), GFP_KERNEL); - if (skb == NULL) - goto errout; - - err = dn_fib_dump_info(skb, portid, nlh->nlmsg_seq, event, tb_id, - f->fn_type, f->fn_scope, &f->fn_key, z, - DN_FIB_INFO(f), 0); - if (err < 0) { - /* -EMSGSIZE implies BUG in dn_fib_nlmsg_size() */ - WARN_ON(err == -EMSGSIZE); - kfree_skb(skb); - goto errout; - } - rtnl_notify(skb, &init_net, portid, RTNLGRP_DECnet_ROUTE, nlh, GFP_KERNEL); - return; -errout: - if (err < 0) - rtnl_set_sk_err(&init_net, RTNLGRP_DECnet_ROUTE, err); -} - -static __inline__ int dn_hash_dump_bucket(struct sk_buff *skb, - struct netlink_callback *cb, - struct dn_fib_table *tb, - struct dn_zone *dz, - struct dn_fib_node *f) -{ - int i, s_i; - - s_i = cb->args[4]; - for(i = 0; f; i++, f = f->fn_next) { - if (i < s_i) - continue; - if (f->fn_state & DN_S_ZOMBIE) - continue; - if (dn_fib_dump_info(skb, NETLINK_CB(cb->skb).portid, - cb->nlh->nlmsg_seq, - RTM_NEWROUTE, - tb->n, - (f->fn_state & DN_S_ZOMBIE) ? 0 : f->fn_type, - f->fn_scope, &f->fn_key, dz->dz_order, - f->fn_info, NLM_F_MULTI) < 0) { - cb->args[4] = i; - return -1; - } - } - cb->args[4] = i; - return skb->len; -} - -static __inline__ int dn_hash_dump_zone(struct sk_buff *skb, - struct netlink_callback *cb, - struct dn_fib_table *tb, - struct dn_zone *dz) -{ - int h, s_h; - - s_h = cb->args[3]; - for(h = 0; h < dz->dz_divisor; h++) { - if (h < s_h) - continue; - if (h > s_h) - memset(&cb->args[4], 0, sizeof(cb->args) - 4*sizeof(cb->args[0])); - if (dz->dz_hash == NULL || dz->dz_hash[h] == NULL) - continue; - if (dn_hash_dump_bucket(skb, cb, tb, dz, dz->dz_hash[h]) < 0) { - cb->args[3] = h; - return -1; - } - } - cb->args[3] = h; - return skb->len; -} - -static int dn_fib_table_dump(struct dn_fib_table *tb, struct sk_buff *skb, - struct netlink_callback *cb) -{ - int m, s_m; - struct dn_zone *dz; - struct dn_hash *table = (struct dn_hash *)tb->data; - - s_m = cb->args[2]; - read_lock(&dn_fib_tables_lock); - for(dz = table->dh_zone_list, m = 0; dz; dz = dz->dz_next, m++) { - if (m < s_m) - continue; - if (m > s_m) - memset(&cb->args[3], 0, sizeof(cb->args) - 3*sizeof(cb->args[0])); - - if (dn_hash_dump_zone(skb, cb, tb, dz) < 0) { - cb->args[2] = m; - read_unlock(&dn_fib_tables_lock); - return -1; - } - } - read_unlock(&dn_fib_tables_lock); - cb->args[2] = m; - - return skb->len; -} - -int dn_fib_dump(struct sk_buff *skb, struct netlink_callback *cb) -{ - struct net *net = sock_net(skb->sk); - unsigned int h, s_h; - unsigned int e = 0, s_e; - struct dn_fib_table *tb; - int dumped = 0; - - if (!net_eq(net, &init_net)) - return 0; - - if (nlmsg_len(cb->nlh) >= sizeof(struct rtmsg) && - ((struct rtmsg *)nlmsg_data(cb->nlh))->rtm_flags&RTM_F_CLONED) - return dn_cache_dump(skb, cb); - - s_h = cb->args[0]; - s_e = cb->args[1]; - - for (h = s_h; h < DN_FIB_TABLE_HASHSZ; h++, s_h = 0) { - e = 0; - hlist_for_each_entry(tb, &dn_fib_table_hash[h], hlist) { - if (e < s_e) - goto next; - if (dumped) - memset(&cb->args[2], 0, sizeof(cb->args) - - 2 * sizeof(cb->args[0])); - if (tb->dump(tb, skb, cb) < 0) - goto out; - dumped = 1; -next: - e++; - } - } -out: - cb->args[1] = e; - cb->args[0] = h; - - return skb->len; -} - -static int dn_fib_table_insert(struct dn_fib_table *tb, struct rtmsg *r, struct nlattr *attrs[], - struct nlmsghdr *n, struct netlink_skb_parms *req) -{ - struct dn_hash *table = (struct dn_hash *)tb->data; - struct dn_fib_node *new_f, *f, **fp, **del_fp; - struct dn_zone *dz; - struct dn_fib_info *fi; - int z = r->rtm_dst_len; - int type = r->rtm_type; - dn_fib_key_t key; - int err; - - if (z > 16) - return -EINVAL; - - dz = table->dh_zones[z]; - if (!dz && !(dz = dn_new_zone(table, z))) - return -ENOBUFS; - - dz_key_0(key); - if (attrs[RTA_DST]) { - __le16 dst = nla_get_le16(attrs[RTA_DST]); - if (dst & ~DZ_MASK(dz)) - return -EINVAL; - key = dz_key(dst, dz); - } - - if ((fi = dn_fib_create_info(r, attrs, n, &err)) == NULL) - return err; - - if (dz->dz_nent > (dz->dz_divisor << 2) && - dz->dz_divisor > DN_MAX_DIVISOR && - (z==16 || (1<<z) > dz->dz_divisor)) - dn_rehash_zone(dz); - - fp = dn_chain_p(key, dz); - - DN_FIB_SCAN(f, fp) { - if (dn_key_leq(key, f->fn_key)) - break; - } - - del_fp = NULL; - - if (f && (f->fn_state & DN_S_ZOMBIE) && - dn_key_eq(f->fn_key, key)) { - del_fp = fp; - fp = &f->fn_next; - f = *fp; - goto create; - } - - DN_FIB_SCAN_KEY(f, fp, key) { - if (fi->fib_priority <= DN_FIB_INFO(f)->fib_priority) - break; - } - - if (f && dn_key_eq(f->fn_key, key) && - fi->fib_priority == DN_FIB_INFO(f)->fib_priority) { - struct dn_fib_node **ins_fp; - - err = -EEXIST; - if (n->nlmsg_flags & NLM_F_EXCL) - goto out; - - if (n->nlmsg_flags & NLM_F_REPLACE) { - del_fp = fp; - fp = &f->fn_next; - f = *fp; - goto replace; - } - - ins_fp = fp; - err = -EEXIST; - - DN_FIB_SCAN_KEY(f, fp, key) { - if (fi->fib_priority != DN_FIB_INFO(f)->fib_priority) - break; - if (f->fn_type == type && - f->fn_scope == r->rtm_scope && - DN_FIB_INFO(f) == fi) - goto out; - } - - if (!(n->nlmsg_flags & NLM_F_APPEND)) { - fp = ins_fp; - f = *fp; - } - } - -create: - err = -ENOENT; - if (!(n->nlmsg_flags & NLM_F_CREATE)) - goto out; - -replace: - err = -ENOBUFS; - new_f = kmem_cache_zalloc(dn_hash_kmem, GFP_KERNEL); - if (new_f == NULL) - goto out; - - new_f->fn_key = key; - new_f->fn_type = type; - new_f->fn_scope = r->rtm_scope; - DN_FIB_INFO(new_f) = fi; - - new_f->fn_next = f; - write_lock_bh(&dn_fib_tables_lock); - *fp = new_f; - write_unlock_bh(&dn_fib_tables_lock); - dz->dz_nent++; - - if (del_fp) { - f = *del_fp; - write_lock_bh(&dn_fib_tables_lock); - *del_fp = f->fn_next; - write_unlock_bh(&dn_fib_tables_lock); - - if (!(f->fn_state & DN_S_ZOMBIE)) - dn_rtmsg_fib(RTM_DELROUTE, f, z, tb->n, n, req); - if (f->fn_state & DN_S_ACCESSED) - dn_rt_cache_flush(-1); - dn_free_node(f); - dz->dz_nent--; - } else { - dn_rt_cache_flush(-1); - } - - dn_rtmsg_fib(RTM_NEWROUTE, new_f, z, tb->n, n, req); - - return 0; -out: - dn_fib_release_info(fi); - return err; -} - - -static int dn_fib_table_delete(struct dn_fib_table *tb, struct rtmsg *r, struct nlattr *attrs[], - struct nlmsghdr *n, struct netlink_skb_parms *req) -{ - struct dn_hash *table = (struct dn_hash*)tb->data; - struct dn_fib_node **fp, **del_fp, *f; - int z = r->rtm_dst_len; - struct dn_zone *dz; - dn_fib_key_t key; - int matched; - - - if (z > 16) - return -EINVAL; - - if ((dz = table->dh_zones[z]) == NULL) - return -ESRCH; - - dz_key_0(key); - if (attrs[RTA_DST]) { - __le16 dst = nla_get_le16(attrs[RTA_DST]); - if (dst & ~DZ_MASK(dz)) - return -EINVAL; - key = dz_key(dst, dz); - } - - fp = dn_chain_p(key, dz); - - DN_FIB_SCAN(f, fp) { - if (dn_key_eq(f->fn_key, key)) - break; - if (dn_key_leq(key, f->fn_key)) - return -ESRCH; - } - - matched = 0; - del_fp = NULL; - DN_FIB_SCAN_KEY(f, fp, key) { - struct dn_fib_info *fi = DN_FIB_INFO(f); - - if (f->fn_state & DN_S_ZOMBIE) - return -ESRCH; - - matched++; - - if (del_fp == NULL && - (!r->rtm_type || f->fn_type == r->rtm_type) && - (r->rtm_scope == RT_SCOPE_NOWHERE || f->fn_scope == r->rtm_scope) && - (!r->rtm_protocol || - fi->fib_protocol == r->rtm_protocol) && - dn_fib_nh_match(r, n, attrs, fi) == 0) - del_fp = fp; - } - - if (del_fp) { - f = *del_fp; - dn_rtmsg_fib(RTM_DELROUTE, f, z, tb->n, n, req); - - if (matched != 1) { - write_lock_bh(&dn_fib_tables_lock); - *del_fp = f->fn_next; - write_unlock_bh(&dn_fib_tables_lock); - - if (f->fn_state & DN_S_ACCESSED) - dn_rt_cache_flush(-1); - dn_free_node(f); - dz->dz_nent--; - } else { - f->fn_state |= DN_S_ZOMBIE; - if (f->fn_state & DN_S_ACCESSED) { - f->fn_state &= ~DN_S_ACCESSED; - dn_rt_cache_flush(-1); - } - if (++dn_fib_hash_zombies > 128) - dn_fib_flush(); - } - - return 0; - } - - return -ESRCH; -} - -static inline int dn_flush_list(struct dn_fib_node **fp, int z, struct dn_hash *table) -{ - int found = 0; - struct dn_fib_node *f; - - while((f = *fp) != NULL) { - struct dn_fib_info *fi = DN_FIB_INFO(f); - - if (fi && ((f->fn_state & DN_S_ZOMBIE) || (fi->fib_flags & RTNH_F_DEAD))) { - write_lock_bh(&dn_fib_tables_lock); - *fp = f->fn_next; - write_unlock_bh(&dn_fib_tables_lock); - - dn_free_node(f); - found++; - continue; - } - fp = &f->fn_next; - } - - return found; -} - -static int dn_fib_table_flush(struct dn_fib_table *tb) -{ - struct dn_hash *table = (struct dn_hash *)tb->data; - struct dn_zone *dz; - int found = 0; - - dn_fib_hash_zombies = 0; - for(dz = table->dh_zone_list; dz; dz = dz->dz_next) { - int i; - int tmp = 0; - for(i = dz->dz_divisor-1; i >= 0; i--) - tmp += dn_flush_list(&dz->dz_hash[i], dz->dz_order, table); - dz->dz_nent -= tmp; - found += tmp; - } - - return found; -} - -static int dn_fib_table_lookup(struct dn_fib_table *tb, const struct flowidn *flp, struct dn_fib_res *res) -{ - int err; - struct dn_zone *dz; - struct dn_hash *t = (struct dn_hash *)tb->data; - - read_lock(&dn_fib_tables_lock); - for(dz = t->dh_zone_list; dz; dz = dz->dz_next) { - struct dn_fib_node *f; - dn_fib_key_t k = dz_key(flp->daddr, dz); - - for(f = dz_chain(k, dz); f; f = f->fn_next) { - if (!dn_key_eq(k, f->fn_key)) { - if (dn_key_leq(k, f->fn_key)) - break; - else - continue; - } - - f->fn_state |= DN_S_ACCESSED; - - if (f->fn_state&DN_S_ZOMBIE) - continue; - - if (f->fn_scope < flp->flowidn_scope) - continue; - - err = dn_fib_semantic_match(f->fn_type, DN_FIB_INFO(f), flp, res); - - if (err == 0) { - res->type = f->fn_type; - res->scope = f->fn_scope; - res->prefixlen = dz->dz_order; - goto out; - } - if (err < 0) - goto out; - } - } - err = 1; -out: - read_unlock(&dn_fib_tables_lock); - return err; -} - - -struct dn_fib_table *dn_fib_get_table(u32 n, int create) -{ - struct dn_fib_table *t; - unsigned int h; - - if (n < RT_TABLE_MIN) - return NULL; - - if (n > RT_TABLE_MAX) - return NULL; - - h = n & (DN_FIB_TABLE_HASHSZ - 1); - rcu_read_lock(); - hlist_for_each_entry_rcu(t, &dn_fib_table_hash[h], hlist) { - if (t->n == n) { - rcu_read_unlock(); - return t; - } - } - rcu_read_unlock(); - - if (!create) - return NULL; - - if (in_interrupt()) { - net_dbg_ratelimited("DECnet: BUG! Attempt to create routing table from interrupt\n"); - return NULL; - } - - t = kzalloc(sizeof(struct dn_fib_table) + sizeof(struct dn_hash), - GFP_KERNEL); - if (t == NULL) - return NULL; - - t->n = n; - t->insert = dn_fib_table_insert; - t->delete = dn_fib_table_delete; - t->lookup = dn_fib_table_lookup; - t->flush = dn_fib_table_flush; - t->dump = dn_fib_table_dump; - hlist_add_head_rcu(&t->hlist, &dn_fib_table_hash[h]); - - return t; -} - -struct dn_fib_table *dn_fib_empty_table(void) -{ - u32 id; - - for(id = RT_TABLE_MIN; id <= RT_TABLE_MAX; id++) - if (dn_fib_get_table(id, 0) == NULL) - return dn_fib_get_table(id, 1); - return NULL; -} - -void dn_fib_flush(void) -{ - int flushed = 0; - struct dn_fib_table *tb; - unsigned int h; - - for (h = 0; h < DN_FIB_TABLE_HASHSZ; h++) { - hlist_for_each_entry(tb, &dn_fib_table_hash[h], hlist) - flushed += tb->flush(tb); - } - - if (flushed) - dn_rt_cache_flush(-1); -} - -void __init dn_fib_table_init(void) -{ - dn_hash_kmem = kmem_cache_create("dn_fib_info_cache", - sizeof(struct dn_fib_info), - 0, SLAB_HWCACHE_ALIGN, - NULL); -} - -void __exit dn_fib_table_cleanup(void) -{ - struct dn_fib_table *t; - struct hlist_node *next; - unsigned int h; - - write_lock(&dn_fib_tables_lock); - for (h = 0; h < DN_FIB_TABLE_HASHSZ; h++) { - hlist_for_each_entry_safe(t, next, &dn_fib_table_hash[h], - hlist) { - hlist_del(&t->hlist); - kfree(t); - } - } - write_unlock(&dn_fib_tables_lock); -} diff --git a/net/decnet/dn_timer.c b/net/decnet/dn_timer.c deleted file mode 100644 index aa4155875ca8..000000000000 --- a/net/decnet/dn_timer.c +++ /dev/null @@ -1,104 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Socket Timer Functions - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * - * - * Changes: - * Steve Whitehouse : Made keepalive timer part of the same - * timer idea. - * Steve Whitehouse : Added checks for sk->sock_readers - * David S. Miller : New socket locking - * Steve Whitehouse : Timer grabs socket ref. - */ -#include <linux/net.h> -#include <linux/socket.h> -#include <linux/skbuff.h> -#include <linux/netdevice.h> -#include <linux/timer.h> -#include <linux/spinlock.h> -#include <net/sock.h> -#include <linux/atomic.h> -#include <linux/jiffies.h> -#include <net/flow.h> -#include <net/dn.h> - -/* - * Slow timer is for everything else (n * 500mS) - */ - -#define SLOW_INTERVAL (HZ/2) - -static void dn_slow_timer(struct timer_list *t); - -void dn_start_slow_timer(struct sock *sk) -{ - timer_setup(&sk->sk_timer, dn_slow_timer, 0); - sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); -} - -void dn_stop_slow_timer(struct sock *sk) -{ - sk_stop_timer(sk, &sk->sk_timer); -} - -static void dn_slow_timer(struct timer_list *t) -{ - struct sock *sk = from_timer(sk, t, sk_timer); - struct dn_scp *scp = DN_SK(sk); - - bh_lock_sock(sk); - - if (sock_owned_by_user(sk)) { - sk_reset_timer(sk, &sk->sk_timer, jiffies + HZ / 10); - goto out; - } - - /* - * The persist timer is the standard slow timer used for retransmits - * in both connection establishment and disconnection as well as - * in the RUN state. The different states are catered for by changing - * the function pointer in the socket. Setting the timer to a value - * of zero turns it off. We allow the persist_fxn to turn the - * timer off in a permant way by returning non-zero, so that - * timer based routines may remove sockets. This is why we have a - * sock_hold()/sock_put() around the timer to prevent the socket - * going away in the middle. - */ - if (scp->persist && scp->persist_fxn) { - if (scp->persist <= SLOW_INTERVAL) { - scp->persist = 0; - - if (scp->persist_fxn(sk)) - goto out; - } else { - scp->persist -= SLOW_INTERVAL; - } - } - - /* - * Check for keepalive timeout. After the other timer 'cos if - * the previous timer caused a retransmit, we don't need to - * do this. scp->stamp is the last time that we sent a packet. - * The keepalive function sends a link service packet to the - * other end. If it remains unacknowledged, the standard - * socket timers will eventually shut the socket down. Each - * time we do this, scp->stamp will be updated, thus - * we won't try and send another until scp->keepalive has passed - * since the last successful transmission. - */ - if (scp->keepalive && scp->keepalive_fxn && (scp->state == DN_RUN)) { - if (time_after_eq(jiffies, scp->stamp + scp->keepalive)) - scp->keepalive_fxn(sk); - } - - sk_reset_timer(sk, &sk->sk_timer, jiffies + SLOW_INTERVAL); -out: - bh_unlock_sock(sk); - sock_put(sk); -} diff --git a/net/decnet/netfilter/Kconfig b/net/decnet/netfilter/Kconfig deleted file mode 100644 index 14ec4ef95fab..000000000000 --- a/net/decnet/netfilter/Kconfig +++ /dev/null @@ -1,17 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# DECnet netfilter configuration -# - -menu "DECnet: Netfilter Configuration" - depends on DECNET && NETFILTER - depends on NETFILTER_ADVANCED - -config DECNET_NF_GRABULATOR - tristate "Routing message grabulator (for userland routing daemon)" - help - Enable this module if you want to use the userland DECnet routing - daemon. You will also need to enable routing support for DECnet - unless you just want to monitor routing messages from other nodes. - -endmenu diff --git a/net/decnet/netfilter/Makefile b/net/decnet/netfilter/Makefile deleted file mode 100644 index 429c84289d0f..000000000000 --- a/net/decnet/netfilter/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for DECnet netfilter modules -# - -obj-$(CONFIG_DECNET_NF_GRABULATOR) += dn_rtmsg.o diff --git a/net/decnet/netfilter/dn_rtmsg.c b/net/decnet/netfilter/dn_rtmsg.c deleted file mode 100644 index 26a9193df783..000000000000 --- a/net/decnet/netfilter/dn_rtmsg.c +++ /dev/null @@ -1,158 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet Routing Message Grabulator - * - * (C) 2000 ChyGwyn Limited - https://www.chygwyn.com/ - * - * Author: Steven Whitehouse <steve(a)chygwyn.com> - */ -#include <linux/module.h> -#include <linux/skbuff.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/netdevice.h> -#include <linux/netfilter.h> -#include <linux/spinlock.h> -#include <net/netlink.h> -#include <linux/netfilter_decnet.h> - -#include <net/sock.h> -#include <net/flow.h> -#include <net/dn.h> -#include <net/dn_route.h> - -static struct sock *dnrmg = NULL; - - -static struct sk_buff *dnrmg_build_message(struct sk_buff *rt_skb, int *errp) -{ - struct sk_buff *skb = NULL; - size_t size; - sk_buff_data_t old_tail; - struct nlmsghdr *nlh; - unsigned char *ptr; - struct nf_dn_rtmsg *rtm; - - size = NLMSG_ALIGN(rt_skb->len) + - NLMSG_ALIGN(sizeof(struct nf_dn_rtmsg)); - skb = nlmsg_new(size, GFP_ATOMIC); - if (!skb) { - *errp = -ENOMEM; - return NULL; - } - old_tail = skb->tail; - nlh = nlmsg_put(skb, 0, 0, 0, size, 0); - if (!nlh) { - kfree_skb(skb); - *errp = -ENOMEM; - return NULL; - } - rtm = (struct nf_dn_rtmsg *)nlmsg_data(nlh); - rtm->nfdn_ifindex = rt_skb->dev->ifindex; - ptr = NFDN_RTMSG(rtm); - skb_copy_from_linear_data(rt_skb, ptr, rt_skb->len); - nlh->nlmsg_len = skb->tail - old_tail; - return skb; -} - -static void dnrmg_send_peer(struct sk_buff *skb) -{ - struct sk_buff *skb2; - int status = 0; - int group = 0; - unsigned char flags = *skb->data; - - switch (flags & DN_RT_CNTL_MSK) { - case DN_RT_PKT_L1RT: - group = DNRNG_NLGRP_L1; - break; - case DN_RT_PKT_L2RT: - group = DNRNG_NLGRP_L2; - break; - default: - return; - } - - skb2 = dnrmg_build_message(skb, &status); - if (skb2 == NULL) - return; - NETLINK_CB(skb2).dst_group = group; - netlink_broadcast(dnrmg, skb2, 0, group, GFP_ATOMIC); -} - - -static unsigned int dnrmg_hook(void *priv, - struct sk_buff *skb, - const struct nf_hook_state *state) -{ - dnrmg_send_peer(skb); - return NF_ACCEPT; -} - - -#define RCV_SKB_FAIL(err) do { netlink_ack(skb, nlh, (err), NULL); return; } while (0) - -static inline void dnrmg_receive_user_skb(struct sk_buff *skb) -{ - struct nlmsghdr *nlh = nlmsg_hdr(skb); - - if (skb->len < sizeof(*nlh) || - nlh->nlmsg_len < sizeof(*nlh) || - skb->len < nlh->nlmsg_len) - return; - - if (!netlink_capable(skb, CAP_NET_ADMIN)) - RCV_SKB_FAIL(-EPERM); - - /* Eventually we might send routing messages too */ - - RCV_SKB_FAIL(-EINVAL); -} - -static const struct nf_hook_ops dnrmg_ops = { - .hook = dnrmg_hook, - .pf = NFPROTO_DECNET, - .hooknum = NF_DN_ROUTE, - .priority = NF_DN_PRI_DNRTMSG, -}; - -static int __init dn_rtmsg_init(void) -{ - int rv = 0; - struct netlink_kernel_cfg cfg = { - .groups = DNRNG_NLGRP_MAX, - .input = dnrmg_receive_user_skb, - }; - - dnrmg = netlink_kernel_create(&init_net, NETLINK_DNRTMSG, &cfg); - if (dnrmg == NULL) { - printk(KERN_ERR "dn_rtmsg: Cannot create netlink socket"); - return -ENOMEM; - } - - rv = nf_register_net_hook(&init_net, &dnrmg_ops); - if (rv) { - netlink_kernel_release(dnrmg); - } - - return rv; -} - -static void __exit dn_rtmsg_fini(void) -{ - nf_unregister_net_hook(&init_net, &dnrmg_ops); - netlink_kernel_release(dnrmg); -} - - -MODULE_DESCRIPTION("DECnet Routing Message Grabulator"); -MODULE_AUTHOR("Steven Whitehouse <steve(a)chygwyn.com>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_DNRTMSG); - -module_init(dn_rtmsg_init); -module_exit(dn_rtmsg_fini); diff --git a/net/decnet/sysctl_net_decnet.c b/net/decnet/sysctl_net_decnet.c deleted file mode 100644 index 67b5ab2657b7..000000000000 --- a/net/decnet/sysctl_net_decnet.c +++ /dev/null @@ -1,362 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * DECnet An implementation of the DECnet protocol suite for the LINUX - * operating system. DECnet is implemented using the BSD Socket - * interface as the means of communication with the user level. - * - * DECnet sysctl support functions - * - * Author: Steve Whitehouse <SteveW(a)ACM.org> - * - * - * Changes: - * Steve Whitehouse - C99 changes and default device handling - * Steve Whitehouse - Memory buffer settings, like the tcp ones - * - */ -#include <linux/mm.h> -#include <linux/sysctl.h> -#include <linux/fs.h> -#include <linux/netdevice.h> -#include <linux/string.h> -#include <net/neighbour.h> -#include <net/dst.h> -#include <net/flow.h> - -#include <linux/uaccess.h> - -#include <net/dn.h> -#include <net/dn_dev.h> -#include <net/dn_route.h> - - -int decnet_debug_level; -int decnet_time_wait = 30; -int decnet_dn_count = 1; -int decnet_di_count = 3; -int decnet_dr_count = 3; -int decnet_log_martians = 1; -int decnet_no_fc_max_cwnd = NSP_MIN_WINDOW; - -/* Reasonable defaults, I hope, based on tcp's defaults */ -long sysctl_decnet_mem[3] = { 768 << 3, 1024 << 3, 1536 << 3 }; -int sysctl_decnet_wmem[3] = { 4 * 1024, 16 * 1024, 128 * 1024 }; -int sysctl_decnet_rmem[3] = { 4 * 1024, 87380, 87380 * 2 }; - -#ifdef CONFIG_SYSCTL -extern int decnet_dst_gc_interval; -static int min_decnet_time_wait[] = { 5 }; -static int max_decnet_time_wait[] = { 600 }; -static int min_state_count[] = { 1 }; -static int max_state_count[] = { NSP_MAXRXTSHIFT }; -static int min_decnet_dst_gc_interval[] = { 1 }; -static int max_decnet_dst_gc_interval[] = { 60 }; -static int min_decnet_no_fc_max_cwnd[] = { NSP_MIN_WINDOW }; -static int max_decnet_no_fc_max_cwnd[] = { NSP_MAX_WINDOW }; -static char node_name[7] = "???"; - -static struct ctl_table_header *dn_table_header = NULL; - -/* - * ctype.h :-) - */ -#define ISNUM(x) (((x) >= '0') && ((x) <= '9')) -#define ISLOWER(x) (((x) >= 'a') && ((x) <= 'z')) -#define ISUPPER(x) (((x) >= 'A') && ((x) <= 'Z')) -#define ISALPHA(x) (ISLOWER(x) || ISUPPER(x)) -#define INVALID_END_CHAR(x) (ISNUM(x) || ISALPHA(x)) - -static void strip_it(char *str) -{ - for(;;) { - switch (*str) { - case ' ': - case '\n': - case '\r': - case ':': - *str = 0; - fallthrough; - case 0: - return; - } - str++; - } -} - -/* - * Simple routine to parse an ascii DECnet address - * into a network order address. - */ -static int parse_addr(__le16 *addr, char *str) -{ - __u16 area, node; - - while(*str && !ISNUM(*str)) str++; - - if (*str == 0) - return -1; - - area = (*str++ - '0'); - if (ISNUM(*str)) { - area *= 10; - area += (*str++ - '0'); - } - - if (*str++ != '.') - return -1; - - if (!ISNUM(*str)) - return -1; - - node = *str++ - '0'; - if (ISNUM(*str)) { - node *= 10; - node += (*str++ - '0'); - } - if (ISNUM(*str)) { - node *= 10; - node += (*str++ - '0'); - } - if (ISNUM(*str)) { - node *= 10; - node += (*str++ - '0'); - } - - if ((node > 1023) || (area > 63)) - return -1; - - if (INVALID_END_CHAR(*str)) - return -1; - - *addr = cpu_to_le16((area << 10) | node); - - return 0; -} - -static int dn_node_address_handler(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - char addr[DN_ASCBUF_LEN]; - size_t len; - __le16 dnaddr; - - if (!*lenp || (*ppos && !write)) { - *lenp = 0; - return 0; - } - - if (write) { - len = (*lenp < DN_ASCBUF_LEN) ? *lenp : (DN_ASCBUF_LEN-1); - memcpy(addr, buffer, len); - addr[len] = 0; - strip_it(addr); - - if (parse_addr(&dnaddr, addr)) - return -EINVAL; - - dn_dev_devices_off(); - - decnet_address = dnaddr; - - dn_dev_devices_on(); - - *ppos += len; - - return 0; - } - - dn_addr2asc(le16_to_cpu(decnet_address), addr); - len = strlen(addr); - addr[len++] = '\n'; - - if (len > *lenp) - len = *lenp; - memcpy(buffer, addr, len); - *lenp = len; - *ppos += len; - - return 0; -} - -static int dn_def_dev_handler(struct ctl_table *table, int write, - void *buffer, size_t *lenp, loff_t *ppos) -{ - size_t len; - struct net_device *dev; - char devname[17]; - - if (!*lenp || (*ppos && !write)) { - *lenp = 0; - return 0; - } - - if (write) { - if (*lenp > 16) - return -E2BIG; - - memcpy(devname, buffer, *lenp); - devname[*lenp] = 0; - strip_it(devname); - - dev = dev_get_by_name(&init_net, devname); - if (dev == NULL) - return -ENODEV; - - if (dev->dn_ptr == NULL) { - dev_put(dev); - return -ENODEV; - } - - if (dn_dev_set_default(dev, 1)) { - dev_put(dev); - return -ENODEV; - } - *ppos += *lenp; - - return 0; - } - - dev = dn_dev_get_default(); - if (dev == NULL) { - *lenp = 0; - return 0; - } - - strcpy(devname, dev->name); - dev_put(dev); - len = strlen(devname); - devname[len++] = '\n'; - - if (len > *lenp) len = *lenp; - - memcpy(buffer, devname, len); - *lenp = len; - *ppos += len; - - return 0; -} - -static struct ctl_table dn_table[] = { - { - .procname = "node_address", - .maxlen = 7, - .mode = 0644, - .proc_handler = dn_node_address_handler, - }, - { - .procname = "node_name", - .data = node_name, - .maxlen = 7, - .mode = 0644, - .proc_handler = proc_dostring, - }, - { - .procname = "default_device", - .maxlen = 16, - .mode = 0644, - .proc_handler = dn_def_dev_handler, - }, - { - .procname = "time_wait", - .data = &decnet_time_wait, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_decnet_time_wait, - .extra2 = &max_decnet_time_wait - }, - { - .procname = "dn_count", - .data = &decnet_dn_count, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_state_count, - .extra2 = &max_state_count - }, - { - .procname = "di_count", - .data = &decnet_di_count, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_state_count, - .extra2 = &max_state_count - }, - { - .procname = "dr_count", - .data = &decnet_dr_count, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_state_count, - .extra2 = &max_state_count - }, - { - .procname = "dst_gc_interval", - .data = &decnet_dst_gc_interval, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_decnet_dst_gc_interval, - .extra2 = &max_decnet_dst_gc_interval - }, - { - .procname = "no_fc_max_cwnd", - .data = &decnet_no_fc_max_cwnd, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &min_decnet_no_fc_max_cwnd, - .extra2 = &max_decnet_no_fc_max_cwnd - }, - { - .procname = "decnet_mem", - .data = &sysctl_decnet_mem, - .maxlen = sizeof(sysctl_decnet_mem), - .mode = 0644, - .proc_handler = proc_doulongvec_minmax - }, - { - .procname = "decnet_rmem", - .data = &sysctl_decnet_rmem, - .maxlen = sizeof(sysctl_decnet_rmem), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { - .procname = "decnet_wmem", - .data = &sysctl_decnet_wmem, - .maxlen = sizeof(sysctl_decnet_wmem), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { - .procname = "debug", - .data = &decnet_debug_level, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec, - }, - { } -}; - -void dn_register_sysctl(void) -{ - dn_table_header = register_net_sysctl(&init_net, "net/decnet", dn_table); -} - -void dn_unregister_sysctl(void) -{ - unregister_net_sysctl_table(dn_table_header); -} - -#else /* CONFIG_SYSCTL */ -void dn_unregister_sysctl(void) -{ -} -void dn_register_sysctl(void) -{ -} - -#endif diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 60332fdb6dd4..5fd0823afed6 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -300,12 +300,6 @@ nf_hook_entry_head(struct net *net, int pf, unsigned int hooknum, if (WARN_ON_ONCE(ARRAY_SIZE(net->nf.hooks_ipv6) <= hooknum)) return NULL; return net->nf.hooks_ipv6 + hooknum; -#if IS_ENABLED(CONFIG_DECNET) - case NFPROTO_DECNET: - if (WARN_ON_ONCE(ARRAY_SIZE(net->nf.hooks_decnet) <= hooknum)) - return NULL; - return net->nf.hooks_decnet + hooknum; -#endif default: WARN_ON_ONCE(1); return NULL; @@ -722,10 +716,6 @@ static int __net_init netfilter_net_init(struct net *net) #ifdef CONFIG_NETFILTER_FAMILY_BRIDGE __netfilter_net_init(net->nf.hooks_bridge, ARRAY_SIZE(net->nf.hooks_bridge)); #endif -#if IS_ENABLED(CONFIG_DECNET) - __netfilter_net_init(net->nf.hooks_decnet, ARRAY_SIZE(net->nf.hooks_decnet)); -#endif - #ifdef CONFIG_PROC_FS net->nf.proc_netfilter = proc_net_mkdir(net, "netfilter", net->proc_net); -- 2.25.1

2 1

[PATCH v2 OLK-5.10] [Backport] SUNRPC: Ensure that the gssproxy client can start in a connected state
by Wang Hai 10 Jul '23

10 Jul '23

From: Trond Myklebust <trond.myklebust(a)hammerspace.com> mainline inclusion from mainline-v5.18-rc7 commit fd13359f54ee854f00134abc6be32da94ec53dbf category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I59RN0 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Ensure that the gssproxy client connects to the server from the gssproxy daemon process context so that the AF_LOCAL socket connection is done using the correct path and namespaces. Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth") Cc: stable(a)vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> conflict: net/sunrpc/clnt.c Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- v1->v2: change bugzilla include/linux/sunrpc/clnt.h | 1 + net/sunrpc/auth_gss/gss_rpc_upcall.c | 1 + net/sunrpc/clnt.c | 33 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+) diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index a28300e18fe3..b7b1abe3e048 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -164,6 +164,7 @@ struct rpc_add_xprt_test { #define RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT (1UL << 9) #define RPC_CLNT_CREATE_SOFTERR (1UL << 10) #define RPC_CLNT_CREATE_REUSEPORT (1UL << 11) +#define RPC_CLNT_CREATE_CONNECTED (1UL << 12) struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, diff --git a/net/sunrpc/auth_gss/gss_rpc_upcall.c b/net/sunrpc/auth_gss/gss_rpc_upcall.c index af9c7f43859c..366968f5b619 100644 --- a/net/sunrpc/auth_gss/gss_rpc_upcall.c +++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c @@ -98,6 +98,7 @@ static int gssp_rpc_create(struct net *net, struct rpc_clnt **_clnt) * done without the correct namespace: */ .flags = RPC_CLNT_CREATE_NOPING | + RPC_CLNT_CREATE_CONNECTED | RPC_CLNT_CREATE_NO_IDLE_TIMEOUT }; struct rpc_clnt *clnt; diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 78c6648af782..6fe8cb84638f 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -75,6 +75,7 @@ static int rpc_encode_header(struct rpc_task *task, static int rpc_decode_header(struct rpc_task *task, struct xdr_stream *xdr); static int rpc_ping(struct rpc_clnt *clnt); +static int rpc_ping_noreply(struct rpc_clnt *clnt); static void rpc_check_timeout(struct rpc_task *task); static void rpc_register_client(struct rpc_clnt *clnt) @@ -479,6 +480,12 @@ static struct rpc_clnt *rpc_create_xprt(struct rpc_create_args *args, rpc_shutdown_client(clnt); return ERR_PTR(err); } + } else if (args->flags & RPC_CLNT_CREATE_CONNECTED) { + int err = rpc_ping_noreply(clnt); + if (err != 0) { + rpc_shutdown_client(clnt); + return ERR_PTR(err); + } } clnt->cl_softrtry = 1; @@ -2674,6 +2681,10 @@ static const struct rpc_procinfo rpcproc_null = { .p_decode = rpcproc_decode_null, }; +static const struct rpc_procinfo rpcproc_null_noreply = { + .p_encode = rpcproc_encode_null, +}; + static int rpc_ping(struct rpc_clnt *clnt) { struct rpc_message msg = { @@ -2685,6 +2696,28 @@ static int rpc_ping(struct rpc_clnt *clnt) return err; } +static int rpc_ping_noreply(struct rpc_clnt *clnt) +{ + struct rpc_message msg = { + .rpc_proc = &rpcproc_null_noreply, + }; + struct rpc_task_setup task_setup_data = { + .rpc_client = clnt, + .rpc_message = &msg, + .callback_ops = &rpc_default_ops, + .flags = RPC_TASK_SOFT | RPC_TASK_SOFTCONN | RPC_TASK_NULLCREDS, + }; + struct rpc_task *task; + int status; + + task = rpc_run_task(&task_setup_data); + if (IS_ERR(task)) + return PTR_ERR(task); + status = task->tk_status; + rpc_put_task(task); + return status; +} + static struct rpc_task *rpc_call_null_helper(struct rpc_clnt *clnt, struct rpc_xprt *xprt, struct rpc_cred *cred, int flags, -- 2.33.0

2 1

[PATCH OLK-5.10] [Backport] SUNRPC: Ensure that the gssproxy client can start in a connected state
by Wang Hai 10 Jul '23

10 Jul '23

From: Trond Myklebust <trond.myklebust(a)hammerspace.com> mainline inclusion from mainline-v5.18-rc7 commit fd13359f54ee854f00134abc6be32da94ec53dbf category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I59RN0 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Ensure that the gssproxy client connects to the server from the gssproxy daemon process context so that the AF_LOCAL socket connection is done using the correct path and namespaces. Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth") Cc: stable(a)vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> conflict: net/sunrpc/clnt.c Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- include/linux/sunrpc/clnt.h | 1 + net/sunrpc/auth_gss/gss_rpc_upcall.c | 1 + net/sunrpc/clnt.c | 33 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+) diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index a28300e18fe3..b7b1abe3e048 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -164,6 +164,7 @@ struct rpc_add_xprt_test { #define RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT (1UL << 9) #define RPC_CLNT_CREATE_SOFTERR (1UL << 10) #define RPC_CLNT_CREATE_REUSEPORT (1UL << 11) +#define RPC_CLNT_CREATE_CONNECTED (1UL << 12) struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, diff --git a/net/sunrpc/auth_gss/gss_rpc_upcall.c b/net/sunrpc/auth_gss/gss_rpc_upcall.c index af9c7f43859c..366968f5b619 100644 --- a/net/sunrpc/auth_gss/gss_rpc_upcall.c +++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c @@ -98,6 +98,7 @@ static int gssp_rpc_create(struct net *net, struct rpc_clnt **_clnt) * done without the correct namespace: */ .flags = RPC_CLNT_CREATE_NOPING | + RPC_CLNT_CREATE_CONNECTED | RPC_CLNT_CREATE_NO_IDLE_TIMEOUT }; struct rpc_clnt *clnt; diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 78c6648af782..6fe8cb84638f 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -75,6 +75,7 @@ static int rpc_encode_header(struct rpc_task *task, static int rpc_decode_header(struct rpc_task *task, struct xdr_stream *xdr); static int rpc_ping(struct rpc_clnt *clnt); +static int rpc_ping_noreply(struct rpc_clnt *clnt); static void rpc_check_timeout(struct rpc_task *task); static void rpc_register_client(struct rpc_clnt *clnt) @@ -479,6 +480,12 @@ static struct rpc_clnt *rpc_create_xprt(struct rpc_create_args *args, rpc_shutdown_client(clnt); return ERR_PTR(err); } + } else if (args->flags & RPC_CLNT_CREATE_CONNECTED) { + int err = rpc_ping_noreply(clnt); + if (err != 0) { + rpc_shutdown_client(clnt); + return ERR_PTR(err); + } } clnt->cl_softrtry = 1; @@ -2674,6 +2681,10 @@ static const struct rpc_procinfo rpcproc_null = { .p_decode = rpcproc_decode_null, }; +static const struct rpc_procinfo rpcproc_null_noreply = { + .p_encode = rpcproc_encode_null, +}; + static int rpc_ping(struct rpc_clnt *clnt) { struct rpc_message msg = { @@ -2685,6 +2696,28 @@ static int rpc_ping(struct rpc_clnt *clnt) return err; } +static int rpc_ping_noreply(struct rpc_clnt *clnt) +{ + struct rpc_message msg = { + .rpc_proc = &rpcproc_null_noreply, + }; + struct rpc_task_setup task_setup_data = { + .rpc_client = clnt, + .rpc_message = &msg, + .callback_ops = &rpc_default_ops, + .flags = RPC_TASK_SOFT | RPC_TASK_SOFTCONN | RPC_TASK_NULLCREDS, + }; + struct rpc_task *task; + int status; + + task = rpc_run_task(&task_setup_data); + if (IS_ERR(task)) + return PTR_ERR(task); + status = task->tk_status; + rpc_put_task(task); + return status; +} + static struct rpc_task *rpc_call_null_helper(struct rpc_clnt *clnt, struct rpc_xprt *xprt, struct rpc_cred *cred, int flags, -- 2.33.0

2 1

[PATCH OLK-5.10] etmem: fix the div 0 problem in swapcache reclaim process
by liubo 10 Jul '23

10 Jul '23

euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7JI6K CVE: NA ---------------------------------------------------- In the swapcache recycling process, the number of pages to be reclaimed on each node is obtained as follows: nr_to_reclaim[nid_num] = (swapcache_to_reclaim / (swapcache_total_reclaimable / nr[nid_num])); However, nr[nid_num] is obtained by traversing the number of swapcache pages on each node. If there are multiple nodes in the environment and no swap process occurs on a node, no swapcache page exists. The value of nr[nid_num] may be 0. Therefore, division by zero errors may occur. Signed-off-by: liubo <liubo254(a)huawei.com> --- mm/vmscan.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/mm/vmscan.c b/mm/vmscan.c index 6416737f5206..15bf47028e15 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -4913,8 +4913,10 @@ int do_swapcache_reclaim(unsigned long *swapcache_watermark, for_each_node_state(nid, N_MEMORY) { cond_resched(); - nr_to_reclaim[nid_num] = (swapcache_to_reclaim / - (swapcache_total_reclaimable / nr[nid_num])); + nr_to_reclaim[nid_num] = (swapcache_total_reclaimable == 0) ? 0 : + ((swapcache_to_reclaim * nr[nid_num]) / + swapcache_total_reclaimable); + reclaim_page_count += reclaim_swapcache_pages_from_list(nid, &swapcache_list[nid_num], nr_to_reclaim[nid_num], false); -- 2.27.0

2 1

[PATCH OLK-5.10] ubi: Fix return value overwrite issue in try_write_vid_and_data()
by ZhaoLong Wang 08 Jul '23

08 Jul '23

From: Wang YanQing <udknight(a)gmail.com> mainline inclusion from mainline-v6.2-rc1 commit 31a149d5c13c4cbcf97de3435817263a2d8c9d6e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7JO2R CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?i… ---------------------------------------- The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code") adds helper function, try_write_vid_and_data(), to simplify the code, but this helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr() or the ubi_io_write_data() return error number (-EIO, etc), because the return value of ubi_wl_put_peb() will overwrite the original return value. This issue will cause unexpected data loss issue, because the caller of this function and UBIFS willn't know the data is lost. Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code") Cc: stable(a)vger.kernel.org Signed-off-by: Wang YanQing <udknight(a)gmail.com> Reviewed-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: ZhaoLong Wang <wangzhaolong1(a)huawei.com> --- drivers/mtd/ubi/eba.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 0edecfdbd01f..b4cdf2351cac 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -947,7 +947,7 @@ static int try_write_vid_and_data(struct ubi_volume *vol, int lnum, int offset, int len) { struct ubi_device *ubi = vol->ubi; - int pnum, opnum, err, vol_id = vol->vol_id; + int pnum, opnum, err, err2, vol_id = vol->vol_id; pnum = ubi_wl_get_peb(ubi); if (pnum < 0) { @@ -982,10 +982,19 @@ static int try_write_vid_and_data(struct ubi_volume *vol, int lnum, out_put: up_read(&ubi->fm_eba_sem); - if (err && pnum >= 0) - err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1); - else if (!err && opnum >= 0) - err = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0); + if (err && pnum >= 0) { + err2 = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1); + if (err2) { + ubi_warn(ubi, "failed to return physical eraseblock %d, error %d", + pnum, err2); + } + } else if (!err && opnum >= 0) { + err2 = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0); + if (err2) { + ubi_warn(ubi, "failed to return physical eraseblock %d, error %d", + opnum, err2); + } + } return err; } -- 2.31.1

2 1

[PATCH OLK-5.10 0/2] ubifs mainline bugfix patch backport
by ZhaoLong Wang 08 Jul '23

08 Jul '23

ISSUE: https://gitee.com/openeuler/kernel/issues/I7JO0G 1. ubifs: Fix memory leak in do_rename 2. ubifs: Free memory for tmpfile name Mårten Lindahl (2): ubifs: Free memory for tmpfile name ubifs: Fix memory leak in do_rename fs/ubifs/dir.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10] [Backport] SUNRPC: Ensure that the gssproxy client can start in a connected state
by Wang Hai 08 Jul '23

08 Jul '23

From: Trond Myklebust <trond.myklebust(a)hammerspace.com> mainline inclusion from mainline-v5.18-rc7 commit fd13359f54ee854f00134abc6be32da94ec53dbf category: bugfix bugzilla: 186837 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Ensure that the gssproxy client connects to the server from the gssproxy daemon process context so that the AF_LOCAL socket connection is done using the correct path and namespaces. Fixes: 1d658336b05f ("SUNRPC: Add RPC based upcall mechanism for RPCGSS auth") Cc: stable(a)vger.kernel.org Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> conflict: net/sunrpc/clnt.c Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- include/linux/sunrpc/clnt.h | 1 + net/sunrpc/auth_gss/gss_rpc_upcall.c | 1 + net/sunrpc/clnt.c | 33 ++++++++++++++++++++++++++++ 3 files changed, 35 insertions(+) diff --git a/include/linux/sunrpc/clnt.h b/include/linux/sunrpc/clnt.h index a28300e18fe3..b7b1abe3e048 100644 --- a/include/linux/sunrpc/clnt.h +++ b/include/linux/sunrpc/clnt.h @@ -164,6 +164,7 @@ struct rpc_add_xprt_test { #define RPC_CLNT_CREATE_NO_RETRANS_TIMEOUT (1UL << 9) #define RPC_CLNT_CREATE_SOFTERR (1UL << 10) #define RPC_CLNT_CREATE_REUSEPORT (1UL << 11) +#define RPC_CLNT_CREATE_CONNECTED (1UL << 12) struct rpc_clnt *rpc_create(struct rpc_create_args *args); struct rpc_clnt *rpc_bind_new_program(struct rpc_clnt *, diff --git a/net/sunrpc/auth_gss/gss_rpc_upcall.c b/net/sunrpc/auth_gss/gss_rpc_upcall.c index af9c7f43859c..366968f5b619 100644 --- a/net/sunrpc/auth_gss/gss_rpc_upcall.c +++ b/net/sunrpc/auth_gss/gss_rpc_upcall.c @@ -98,6 +98,7 @@ static int gssp_rpc_create(struct net *net, struct rpc_clnt **_clnt) * done without the correct namespace: */ .flags = RPC_CLNT_CREATE_NOPING | + RPC_CLNT_CREATE_CONNECTED | RPC_CLNT_CREATE_NO_IDLE_TIMEOUT }; struct rpc_clnt *clnt; diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 78c6648af782..6fe8cb84638f 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -75,6 +75,7 @@ static int rpc_encode_header(struct rpc_task *task, static int rpc_decode_header(struct rpc_task *task, struct xdr_stream *xdr); static int rpc_ping(struct rpc_clnt *clnt); +static int rpc_ping_noreply(struct rpc_clnt *clnt); static void rpc_check_timeout(struct rpc_task *task); static void rpc_register_client(struct rpc_clnt *clnt) @@ -479,6 +480,12 @@ static struct rpc_clnt *rpc_create_xprt(struct rpc_create_args *args, rpc_shutdown_client(clnt); return ERR_PTR(err); } + } else if (args->flags & RPC_CLNT_CREATE_CONNECTED) { + int err = rpc_ping_noreply(clnt); + if (err != 0) { + rpc_shutdown_client(clnt); + return ERR_PTR(err); + } } clnt->cl_softrtry = 1; @@ -2674,6 +2681,10 @@ static const struct rpc_procinfo rpcproc_null = { .p_decode = rpcproc_decode_null, }; +static const struct rpc_procinfo rpcproc_null_noreply = { + .p_encode = rpcproc_encode_null, +}; + static int rpc_ping(struct rpc_clnt *clnt) { struct rpc_message msg = { @@ -2685,6 +2696,28 @@ static int rpc_ping(struct rpc_clnt *clnt) return err; } +static int rpc_ping_noreply(struct rpc_clnt *clnt) +{ + struct rpc_message msg = { + .rpc_proc = &rpcproc_null_noreply, + }; + struct rpc_task_setup task_setup_data = { + .rpc_client = clnt, + .rpc_message = &msg, + .callback_ops = &rpc_default_ops, + .flags = RPC_TASK_SOFT | RPC_TASK_SOFTCONN | RPC_TASK_NULLCREDS, + }; + struct rpc_task *task; + int status; + + task = rpc_run_task(&task_setup_data); + if (IS_ERR(task)) + return PTR_ERR(task); + status = task->tk_status; + rpc_put_task(task); + return status; +} + static struct rpc_task *rpc_call_null_helper(struct rpc_clnt *clnt, struct rpc_xprt *xprt, struct rpc_cred *cred, int flags, -- 2.33.0

2 1

[PATCH OLK-5.10] dm thin: fix deadlock when swapping to thin device
by Li Lingfeng 08 Jul '23

08 Jul '23

From: Coly Li <colyli(a)suse.de> mainline inclusion from mainline-v6.3-rc4 commit 9bbf5feecc7eab2c370496c1c161bbfe62084028 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7JLUM CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- This is an already known issue that dm-thin volume cannot be used as swap, otherwise a deadlock may happen when dm-thin internal memory demand triggers swap I/O on the dm-thin volume itself. But thanks to commit a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device"), the limit_swap_bios target flag can also be used for dm-thin to avoid the recursive I/O when it is used as swap. Fix is to simply set ti->limit_swap_bios to true in both pool_ctr() and thin_ctr(). In my test, I create a dm-thin volume /dev/vg/swap and use it as swap device. Then I run fio on another dm-thin volume /dev/vg/main and use large --blocksize to trigger swap I/O onto /dev/vg/swap. The following fio command line is used in my test, fio --name recursive-swap-io --lockmem 1 --iodepth 128 \ --ioengine libaio --filename /dev/vg/main --rw randrw \ --blocksize 1M --numjobs 32 --time_based --runtime=12h Without this fix, the whole system can be locked up within 15 seconds. With this fix, there is no any deadlock or hung task observed after 2 hours of running fio. Furthermore, if blocksize is changed from 1M to 128M, after around 30 seconds fio has no visible I/O, and the out-of-memory killer message shows up in kernel message. After around 20 minutes all fio processes are killed and the whole system is back to being alive. This is exactly what is expected when recursive I/O happens on dm-thin volume when it is used as swap. Depends-on: a666e5c05e7c ("dm: fix deadlock when swapping to encrypted device") Cc: stable(a)vger.kernel.org Signed-off-by: Coly Li <colyli(a)suse.de> Acked-by: Mikulas Patocka <mpatocka(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflict: drivers/md/dm-thin.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-thin.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/md/dm-thin.c b/drivers/md/dm-thin.c index e837839e4def..83ea80774676 100644 --- a/drivers/md/dm-thin.c +++ b/drivers/md/dm-thin.c @@ -3379,6 +3379,7 @@ static int pool_ctr(struct dm_target *ti, unsigned argc, char **argv) pt->low_water_blocks = low_water_blocks; pt->adjusted_pf = pt->requested_pf = pf; ti->num_flush_bios = 1; + ti->limit_swap_bios = true; /* * Only need to enable discards if the pool should pass @@ -4256,6 +4257,7 @@ static int thin_ctr(struct dm_target *ti, unsigned argc, char **argv) goto bad; ti->num_flush_bios = 1; + ti->limit_swap_bios = true; ti->flush_supported = true; ti->per_io_data_size = sizeof(struct dm_thin_endio_hook); -- 2.31.1

2 1

[PATCH OLK-5.10] block: don't set GD_NEED_PART_SCAN if scan partition failed
by Li Lingfeng 08 Jul '23

08 Jul '23

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v6.3-rc6 commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7J3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/genhd.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- block/genhd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 3c34dd011585..83f407e1563a 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -770,6 +770,13 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode) else blkdev_put(bdev, mode & ~FMODE_EXCL); + /* + * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set, + * and this will cause that re-assemble partitioned raid device will + * creat partition for underlying disk. + */ + clear_bit(GD_NEED_PART_SCAN, &disk->state); + if (!(mode & FMODE_EXCL)) { bd_abort_claiming(claim, claim, disk_scan_partitions); bdput(claim); -- 2.31.1

2 1

[PATCH 4.19 00/22] linux-4.19.y inclusion part2
by Yongqiang Liu 07 Jul '23

07 Jul '23

Benedict Wong (1): xfrm: Check if_id in inbound policy/secpath match Cambda Zhu (1): tcp: Return user_mss for TCP_MAXSEG in CLOSE/LISTEN state if user_mss set Eric Dumazet (7): netlink: annotate accesses to nlk->cb_running net: annotate sk->sk_err write from do_recvmmsg() net: datagram: fix data-races in datagram_poll() vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() af_packet: do not use READ_ONCE() in packet_bind() rfs: annotate lockless accesses to sk->sk_rxhash rfs: annotate lockless accesses to RFS sock flow table Gavrilov Ilia (1): ipv6: Fix out-of-bounds access in ipv6_find_tlv() Guillaume Nault (1): ping6: Fix send to link-local addresses with VRF. Hangyu Hua (1): net: sched: fix possible refcount leak in tc_chain_tmplt_add() Kuniyuki Iwashima (4): af_unix: Fix a data race of sk->sk_receive_queue->qlen. af_unix: Fix data races around sk->sk_shutdown. udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated(). af_packet: Fix data-races of pkt_sk(sk)->num. Nick Child (1): net: Catch invalid index in XPS mapping Nicolas Dichtel (1): ipv{4,6}/raw: fix output xfrm lookup wrt protocol Paolo Abeni (1): tcp: factor out __tcp_close() helper Pratyush Yadav (1): net: fix skb leak in __skb_tstamp_tx() Tobias Brunner (1): af_key: Reject optional tunnel/BEET mode templates in outbound policies Vladislav Efanov (1): udp6: Fix race condition in udp6_sendmsg & connect include/linux/netdevice.h | 7 +++++-- include/net/ip.h | 2 ++ include/net/sock.h | 18 +++++++++++++----- include/net/tcp.h | 1 + include/uapi/linux/in.h | 2 ++ net/8021q/vlan_dev.c | 4 ++-- net/core/datagram.c | 15 ++++++++++----- net/core/dev.c | 8 ++++++-- net/core/skbuff.c | 4 +++- net/core/sock.c | 2 +- net/ipv4/ip_sockglue.c | 12 +++++++++++- net/ipv4/raw.c | 5 ++++- net/ipv4/tcp.c | 12 +++++++++--- net/ipv4/udplite.c | 2 ++ net/ipv6/exthdrs_core.c | 2 ++ net/ipv6/ping.c | 3 ++- net/ipv6/raw.c | 3 ++- net/ipv6/udplite.c | 2 ++ net/key/af_key.c | 12 ++++++++---- net/netlink/af_netlink.c | 8 ++++---- net/packet/af_packet.c | 8 +++++--- net/packet/diag.c | 2 +- net/sched/cls_api.c | 1 + net/socket.c | 2 +- net/unix/af_unix.c | 22 +++++++++++++--------- net/xfrm/xfrm_policy.c | 11 ++++++----- 26 files changed, 118 insertions(+), 52 deletions(-) -- 2.25.1

1 22

[PATCH openEuler-23.09 v1 0/2] Add initial openeuler_defconfig
by Wei Li 07 Jul '23

07 Jul '23

Add initial openeuler_defconfig of arm64 and x86_64, inheritted from openEuler-22.03-LTS-SP2. Wei Li (2): config: arm64: Add initial openeuler_defconfig config: x86_64: Add initial openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 7815 ++++++++++++++++++++ arch/x86/configs/openeuler_defconfig | 9053 ++++++++++++++++++++++++ 2 files changed, 16868 insertions(+) create mode 100644 arch/arm64/configs/openeuler_defconfig create mode 100644 arch/x86/configs/openeuler_defconfig -- 2.25.1

1 2

[PATCH 4.19 1/7] quota: avoid increasing DQST_LOOKUPS when iterating over dirty/inuse list
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Chengguang Xu <cgxu519(a)zoho.com.cn> mainline inclusion from mainline-v5.5-rc1 commit 05848db2083d4f232e84e385845dcd98d5c511b2 category: bugfix bugzilla: 188812,https://gitee.com/openeuler/kernel/issues/I7E0YR CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- It is meaningless to increase DQST_LOOKUPS number while iterating over dirty/inuse list, so just avoid it. Link: https://lore.kernel.org/r/20190926083408.4269-1-cgxu519@zoho.com.cn Signed-off-by: Chengguang Xu <cgxu519(a)zoho.com.cn> Signed-off-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/quota/dquot.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c index 316f49cbc032..3b02d68d9522 100644 --- a/fs/quota/dquot.c +++ b/fs/quota/dquot.c @@ -589,7 +589,6 @@ int dquot_scan_active(struct super_block *sb, /* Now we have active dquot so we can just increase use count */ atomic_inc(&dquot->dq_count); spin_unlock(&dq_list_lock); - dqstats_inc(DQST_LOOKUPS); dqput(old_dquot); old_dquot = dquot; /* @@ -644,7 +643,6 @@ int dquot_writeback_dquots(struct super_block *sb, int type) * use count */ dqgrab(dquot); spin_unlock(&dq_list_lock); - dqstats_inc(DQST_LOOKUPS); err = sb->dq_op->write_dquot(dquot); if (err) { /* -- 2.25.1

1 6

[PATCH 4.19 00/12] linux-4.19.y inclusion part1
by Yongqiang Liu 07 Jul '23

07 Jul '23

Armin Wolf (1): ACPI: EC: Fix oops when removing custom query handlers Ben Hutchings (1): lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release() Damien Le Moal (1): scsi: core: Improve scsi_vpd_inquiry() checks Dave Hansen (1): x86/mm: Avoid incomplete Global INVLPG flushes Eli Cohen (1): lib: cpu_rmap: Avoid use after free on rmap->obj array entries Josh Poimboeuf (1): sched: Fix KCSAN noinstr violation Lukas Wunner (1): PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock Min-Hua Chen (1): arm64/mm: mark private VM_FAULT_X defines as vm_fault_t Nathan Chancellor (1): kernel/extable.c: use address-of operator on section symbols Theodore Ts'o (1): ext4: improve error recovery code paths in __ext4_remount() Tony Lindgren (1): serial: 8250: Reinit port->pm on port specific driver unbind void0red (1): ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects arch/arm64/mm/fault.c | 4 ++-- arch/x86/include/asm/intel-family.h | 5 +++++ arch/x86/mm/init.c | 25 +++++++++++++++++++++++++ drivers/acpi/acpica/dbnames.c | 3 +++ drivers/acpi/ec.c | 1 + drivers/pci/hotplug/pciehp_pci.c | 15 +++++++++++++++ drivers/scsi/scsi.c | 11 +++++++++-- drivers/tty/serial/8250/8250_core.c | 1 + fs/ext4/super.c | 14 +++++++++++--- include/linux/sched/task_stack.h | 2 +- kernel/extable.c | 3 ++- lib/cpu_rmap.c | 5 ++++- 12 files changed, 79 insertions(+), 10 deletions(-) -- 2.25.1

1 12

[PATCH 4.19 0/9] mainline bugfixes backport
by Yongqiang Liu 07 Jul '23

07 Jul '23

Christoph Hellwig (1): block: return -EBUSY when there are open partitions in blkdev_reread_part Eric Biggers (1): random: fix data race on crng_node_pool Salman Qazi (1): block: Limit number of items taken from the I/O scheduler in one go Sebastian Andrzej Siewior (1): crypto: cryptd - Protect per-CPU resource by disabling BH. Siddh Raman Pant (1): loop: Check for overflow while configuring loop Yu Kuai (2): blk-wbt: make enable_state more accurate block: don't set GD_NEED_PART_SCAN if scan partition failed Zhong Jinghua (2): Revert "loop: Check for overflow while configuring loop" loop: loop_set_status_from_info() check before assignment block/blk-mq-sched.c | 66 ++++++++++++++++++++++++++++++++++--------- block/blk-wbt.c | 7 ++++- block/blk-wbt.h | 12 ++++---- block/genhd.c | 6 ++++ block/ioctl.c | 4 +++ crypto/cryptd.c | 23 ++++++++------- drivers/block/loop.c | 10 +++---- drivers/char/random.c | 42 ++++++++++++++------------- 8 files changed, 113 insertions(+), 57 deletions(-) -- 2.25.1

1 9

[PATCH 4.19] x86/kprobes: Fix the error judgment for debug exceptions
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Li Huafei <lihuafei1(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7EU4Q CVE: NA -------------------------------- We get the following crash caused by a null pointer access: <SNIP> BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 54 PID: 2469325 Comm: ftracetest Kdump: loaded Tainted: GFS OE 5.10.0+ #12 Hardware name: Huawei RH2288H V3/BC11HGSA0, BIOS 3.35 10/20/2016 RIP: 0010:resume_execution+0x35/0x190 Code: 41 54 55 48 89 fd 53 48 89 f3 48 83 ec 08 4c 8b 6f 60 4c 8b b6 98 00 00 00 48 89 14 24 4c 8b 67 28 4d 89 ef eb 04 49 83 c5 01 <41> 0f b6 7d 00 e8 f1 12 57 00 83 e0 0f 8d 48 ff 83 f9 0a 76 e7 83 RSP: 0018:fffffe16118acec0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: fffffe16118acf58 RCX: 00000000eefdca76 RDX: ffff8f8cffd1f400 RSI: fffffe16118acf58 RDI: ffff8f5500d3c000 RBP: ffff8f5500d3c000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff970e39c0 R13: 0000000000000000 R14: ffffb55ba0bd7c60 R15: 0000000000000000 FS: 00002aaaaad22740(0000) GS:ffff8f8cffd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000003ac202c003 CR4: 00000000003706e0 DR0: ffffffff98000160 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Call Trace: <#DB> kprobe_debug_handler+0x41/0xd0 exc_debug+0xe5/0x1b0 asm_exc_debug+0x19/0x30 RIP: 0010:copy_from_kernel_nofault.part.0+0x55/0xc0 Code: 85 c0 74 e1 65 48 8b 04 25 40 f0 01 00 83 a8 78 14 00 00 01 48 c7 c0 f2 ff ff ff c3 cc cc cc cc 48 83 fa 03 76 16 31 c0 8b 0e <89> 0f 85 c0 75 d4 48 83 c7 04 48 83 c6 04 48 83 ea 04 48 83 fa 01 RSP: 0018:ffffb55ba0bd7c60 EFLAGS: 00000246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000076207325 RDX: 0000000000000004 RSI: ffffffff98000160 RDI: ffff8f5500c0902c RBP: ffff8f5500c0902c R08: ffffb55ba0bd7bdc R09: 0000000000000001 R10: ffff8f5548a0faf8 R11: 0000000000000000 R12: ffffffff98000160 R13: 0000000000000000 R14: ffff8f560da128c0 R15: 0000000000000000 </#DB> process_fetch_insn+0xfb/0x720 kprobe_trace_func+0x199/0x2c0 ? kernel_clone+0x5/0x2f0 kprobe_dispatcher+0x3d/0x60 aggr_pre_handler+0x40/0x80 ? kernel_clone+0x1/0x2f0 kprobe_ftrace_handler+0x82/0xf0 ? __se_sys_clone+0x65/0x90 ftrace_ops_assist_func+0x86/0x110 ? rcu_nocb_try_bypass+0x1f3/0x370 0xffffffffc07e60c8 ? kernel_clone+0x1/0x2f0 kernel_clone+0x5/0x2f0 <SNIP> The analysis reveals that kprobe and hardware breakpoints conflict in the use of debug exceptions. If we set a hardware breakpoint on a memory address, and at the same time there is a kprobe event that also goes to get the memory of that address, then when kprobe triggers, it will go to read the memory and trigger hardware breakpoint monitoring, at this time, because kprobe handles debug exceptions earlier than hardware breakpoints, it will cause kprobe to incorrectly consider this exception as a kprobe trigger. kprobe will change the status from KPROBE_HIT_ACTIVE to KPROBE_HIT_SS or KPROBE_HIT_SSDONE before single-step execution, so if the current status is KPROBE_HIT_ACTIVE, its not a debug exception triggered by kprobe. Signed-off-by: Li Huafei <lihuafei1(a)huawei.com> Reviewed-by: Ye Weihua <yeweihua4(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- arch/x86/kernel/kprobes/core.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index d04f670f5262..7a40251a2061 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -995,7 +995,15 @@ int kprobe_debug_handler(struct pt_regs *regs) struct kprobe *cur = kprobe_running(); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); - if (!cur) + if (!cur || !cur->ainsn.insn) + return 0; + + /* kprobe will change the status from KPROBE_HIT_ACTIVE to + * KPROBE_HIT_SS or KPROBE_HIT_SSDONE before single-step execution, so + * if the current status is KPROBE_HIT_ACTIVE, its not a debug + * exception triggered by kprobe. + */ + if (kcb->kprobe_status == KPROBE_HIT_ACTIVE) return 0; resume_execution(cur, regs, kcb); -- 2.25.1

1 0

[PATCH OLK-5.10 v2] dm thin metadata: check fail_io before using data_sm
by Li Lingfeng 07 Jul '23

07 Jul '23

mainline inclusion from mainline-v6.4-rc8 commit cb65b282c9640c27d3129e2e04b711ce1b352838 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FITX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Must check pmd->fail_io before using pmd->data_sm since pmd->data_sm may be destroyed by other processes. P1(kworker) P2(message) do_worker process_prepared process_prepared_discard_passdown_pt2 dm_pool_dec_data_range pool_message commit dm_pool_commit_metadata ↓ // commit failed metadata_operation_failed abort_transaction dm_pool_abort_metadata __open_or_format_metadata ↓ dm_sm_disk_open ↓ // open failed // pmd->data_sm is NULL dm_sm_dec_blocks ↓ // try to access pmd->data_sm --> UAF As shown above, if dm_pool_commit_metadata() and dm_pool_abort_metadata() fail in pool_message process, kworker may trigger UAF. Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks") Cc: stable(a)vger.kernel.org Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-thin-metadata.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- v1->v2: do not change default return value of dm_pool_inc_data_range and dm_pool_dec_data_range drivers/md/dm-thin-metadata.c | 36 ++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 85e80fc17641..69401bfac76e 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1771,13 +1771,15 @@ int dm_thin_remove_range(struct dm_thin_device *td, int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result) { - int r; + int r = -EINVAL; uint32_t ref_count; down_read(&pmd->root_lock); - r = dm_sm_get_count(pmd->data_sm, b, &ref_count); - if (!r) - *result = (ref_count > 1); + if (!pmd->fail_io) { + r = dm_sm_get_count(pmd->data_sm, b, &ref_count); + if (!r) + *result = (ref_count > 1); + } up_read(&pmd->root_lock); return r; @@ -1788,10 +1790,14 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int r = 0; pmd_write_lock(pmd); - for (; b != e; b++) { - r = dm_sm_inc_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + for (; b != e; b++) { + r = dm_sm_inc_block(pmd->data_sm, b); + if (r) + break; + } + } else { + r = -EINVAL; } pmd_write_unlock(pmd); @@ -1800,13 +1806,17 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e) { - int r = 0; + int r = -EINVAL; pmd_write_lock(pmd); - for (; b != e; b++) { - r = dm_sm_dec_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + for (; b != e; b++) { + r = dm_sm_dec_block(pmd->data_sm, b); + if (r) + break; + } + } else { + r = -EINVAL; } pmd_write_unlock(pmd); -- 2.31.1

2 1

[PATCH OLK-5.10 0/4] dm: requeue IO if mapping table not yet
by Li Lingfeng 07 Jul '23

07 Jul '23

It's not proper to just abort IO when the map is not ready. So revert this and requeue IO to keep consistent with the community. And fix the deadlock introduced by the patch. v1->v2: add patch 38d11da522aa "dm: don't lock fs when the map is NULL in process of resume" Li Lingfeng (3): Revert "dm: make sure dm_table is binded before queue request" dm: don't lock fs when the map is NULL in process of resume dm: don't lock fs when the map is NULL during suspend or resume Mike Snitzer (1): dm: requeue IO if mapping table not yet available drivers/md/dm-rq.c | 6 ++---- drivers/md/dm.c | 15 +++++++-------- 2 files changed, 9 insertions(+), 12 deletions(-) -- 2.31.1

2 5

[PATCH 4.19 1/3] quota: fixup *_write_file_info() to return proper error code
by Yongqiang Liu 07 Jul '23

07 Jul '23

From: Yangtao Li <frank.li(a)vivo.com> mainline inclusion from mainline-v6.4-rc1 commit f8107c996f5419a5b964b9796d736c7b81f099a0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7D7ZL?from=project-issue CVE: NA -------------------------------- For v1_write_file_info function, when quota_write() returns 0, it should be considered an EIO error. And for v2_write_file_info(), fix to proper error return code instead of raw number. Signed-off-by: Yangtao Li <frank.li(a)vivo.com> Signed-off-by: Jan Kara <jack(a)suse.cz> Message-Id: <20230227120216.31306-1-frank.li(a)vivo.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/quota/quota_v1.c | 2 +- fs/quota/quota_v2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/quota/quota_v1.c b/fs/quota/quota_v1.c index 7ac5298aba70..ebae72dc805a 100644 --- a/fs/quota/quota_v1.c +++ b/fs/quota/quota_v1.c @@ -205,7 +205,7 @@ static int v1_write_file_info(struct super_block *sb, int type) sizeof(struct v1_disk_dqblk), v1_dqoff(0)); if (ret == sizeof(struct v1_disk_dqblk)) ret = 0; - else if (ret > 0) + else if (ret >= 0) ret = -EIO; out: up_write(&dqopt->dqio_sem); diff --git a/fs/quota/quota_v2.c b/fs/quota/quota_v2.c index 22367b851d6b..760b947d061e 100644 --- a/fs/quota/quota_v2.c +++ b/fs/quota/quota_v2.c @@ -213,7 +213,7 @@ static int v2_write_file_info(struct super_block *sb, int type) up_write(&dqopt->dqio_sem); if (size != sizeof(struct v2_disk_dqinfo)) { quota_error(sb, "Can't write info structure"); - return -1; + return size < 0 ? size : -EIO; } return 0; } -- 2.25.1

1 2

[PATCH OLK-5.10] bpf: Fix incorrect verifier pruning due to missing register precision taints
by Pu Lehui 06 Jul '23

06 Jul '23

stable inclusion from stable-v5.10.179 commit b1281d008845ae9a4de9ef7510dcc1667557a67a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7J5UK CVE: CVE-2023-2163 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 71b547f561247897a0a14f3082730156c0533fed ] Juan Jose et al reported an issue found via fuzzing where the verifier's pruning logic prematurely marks a program path as safe. Consider the following program: 0: (b7) r6 = 1024 1: (b7) r7 = 0 2: (b7) r8 = 0 3: (b7) r9 = -2147483648 4: (97) r6 %= 1025 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 7: (97) r6 %= 1 8: (b7) r9 = 0 9: (bd) if r6 <= r9 goto pc+1 10: (b7) r6 = 0 11: (b7) r0 = 0 12: (63) *(u32 *)(r10 -4) = r0 13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48) 15: (bf) r1 = r4 16: (bf) r2 = r10 17: (07) r2 += -4 18: (85) call bpf_map_lookup_elem#1 19: (55) if r0 != 0x0 goto pc+1 20: (95) exit 21: (77) r6 >>= 10 22: (27) r6 *= 8192 23: (bf) r1 = r0 24: (0f) r0 += r6 25: (79) r3 = *(u64 *)(r0 +0) 26: (7b) *(u64 *)(r1 +0) = r3 27: (95) exit The verifier treats this as safe, leading to oob read/write access due to an incorrect verifier conclusion: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0 last_idx 8 first_idx 0 regs=40 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe frame 0: propagating r6 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 from 6 to 9: safe verification time 110 usec stack depth 4 processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 The verifier considers this program as safe by mistakenly pruning unsafe code paths. In the above func#0, code lines 0-10 are of interest. In line 0-3 registers r6 to r9 are initialized with known scalar values. In line 4 the register r6 is reset to an unknown scalar given the verifier does not track modulo operations. Due to this, the verifier can also not determine precisely which branches in line 6 and 9 are taken, therefore it needs to explore them both. As can be seen, the verifier starts with exploring the false/fall-through paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic, r6 is correctly marked for precision tracking where backtracking kicks in where it walks back the current path all the way where r6 was set to 0 in the fall-through branch. Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also here, the state of the registers is the same, that is, r6=0 and r9=0, so that at line 19 the path can be pruned as it is considered safe. It is interesting to note that the conditional in line 9 turned r6 into a more precise state, that is, in the fall-through path at the beginning of line 10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed here) at the beginning of line 11, r6 turned into a known const r6=0 as r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must be 0 (**): [...] ; R6_w=scalar() 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 [...] from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 [...] The next path is 'from 6 to 9'. The verifier considers the old and current state equivalent, and therefore prunes the search incorrectly. Looking into the two states which are being compared by the pruning logic at line 9, the old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag correctly set in the old state, r9 did not. Both r6'es are considered as equivalent given the old one is a superset of the current, more precise one, however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9 did not have reg->precise flag set, the verifier does not consider the register as contributing to the precision state of r6, and therefore it considered both r9 states as equivalent. However, for this specific pruned path (which is also the actual path taken at runtime), register r6 will be 0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map. The purpose of precision tracking is to initially mark registers (including spilled ones) as imprecise to help verifier's pruning logic finding equivalent states it can then prune if they don't contribute to the program's safety aspects. For example, if registers are used for pointer arithmetic or to pass constant length to a helper, then the verifier sets reg->precise flag and backtracks the BPF program instruction sequence and chain of verifier states to ensure that the given register or stack slot including their dependencies are marked as precisely tracked scalar. This also includes any other registers and slots that contribute to a tracked state of given registers/stack slot. This backtracking relies on recorded jmp_history and is able to traverse entire chain of parent states. This process ends only when all the necessary registers/slots and their transitive dependencies are marked as precise. The backtrack_insn() is called from the current instruction up to the first instruction, and its purpose is to compute a bitmask of registers and stack slots that need precision tracking in the parent's verifier state. For example, if a current instruction is r6 = r7, then r6 needs precision after this instruction and r7 needs precision before this instruction, that is, in the parent state. Hence for the latter r7 is marked and r6 unmarked. For the class of jmp/jmp32 instructions, backtrack_insn() today only looks at call and exit instructions and for all other conditionals the masks remain as-is. However, in the given situation register r6 has a dependency on r9 (as described above in **), so also that one needs to be marked for precision tracking. In other words, if an imprecise register influences a precise one, then the imprecise register should also be marked precise. Meaning, in the parent state both dest and src register need to be tracked for precision and therefore the marking must be more conservative by setting reg->precise flag for both. The precision propagation needs to cover both for the conditional: if the src reg was marked but not the dst reg and vice versa. After the fix the program is correctly rejected: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0 last_idx 8 first_idx 0 regs=240 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 9: (bd) if r6 <= r9 goto pc+1 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 last_idx 9 first_idx 0 regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 11: R6=scalar(umax=18446744071562067968) R9=-2147483648 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff)) 22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192) 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 21 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? last_idx 19 first_idx 11 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 last_idx 9 first_idx 0 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 math between map_value pointer and register with unbounded min value is not allowed verification time 886 usec stack depth 4 processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2 Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reported-by: Meador Inge <meadori(a)google.com> Reported-by: Simon Scannell <simonscannell(a)google.com> Reported-by: Nenad Stojanovski <thenenadx(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Co-developed-by: Andrii Nakryiko <andrii(a)kernel.org> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Reviewed-by: John Fastabend <john.fastabend(a)gmail.com> Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reviewed-by: Meador Inge <meadori(a)google.com> Reviewed-by: Simon Scannell <simonscannell(a)google.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> --- kernel/bpf/verifier.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index c91533a54121..407f2263216d 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1923,6 +1923,21 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, } } else if (opcode == BPF_EXIT) { return -ENOTSUPP; + } else if (BPF_SRC(insn->code) == BPF_X) { + if (!(*reg_mask & (dreg | sreg))) + return 0; + /* dreg <cond> sreg + * Both dreg and sreg need precision before + * this insn. If only sreg was marked precise + * before it would be equally necessary to + * propagate it to dreg. + */ + *reg_mask |= (sreg | dreg); + /* else dreg <cond> K + * Only dreg still needs precision before + * this insn, so for the K-based conditional + * there is nothing new to be marked. + */ } } else if (class == BPF_LD) { if (!(*reg_mask & dreg)) -- 2.25.1

2 1

[PATCH OLK-5.10] bpf: Fix incorrect verifier pruning due to missing register precision taints
by Pu Lehui 06 Jul '23

06 Jul '23

From: Pu Lehui <pulehui(a)huawei.com> stable inclusion from stable-v5.10.179 commit b1281d008845ae9a4de9ef7510dcc1667557a67a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7J5UK CVE: CVE-2023-2163 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 71b547f561247897a0a14f3082730156c0533fed ] Juan Jose et al reported an issue found via fuzzing where the verifier's pruning logic prematurely marks a program path as safe. Consider the following program: 0: (b7) r6 = 1024 1: (b7) r7 = 0 2: (b7) r8 = 0 3: (b7) r9 = -2147483648 4: (97) r6 %= 1025 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 7: (97) r6 %= 1 8: (b7) r9 = 0 9: (bd) if r6 <= r9 goto pc+1 10: (b7) r6 = 0 11: (b7) r0 = 0 12: (63) *(u32 *)(r10 -4) = r0 13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48) 15: (bf) r1 = r4 16: (bf) r2 = r10 17: (07) r2 += -4 18: (85) call bpf_map_lookup_elem#1 19: (55) if r0 != 0x0 goto pc+1 20: (95) exit 21: (77) r6 >>= 10 22: (27) r6 *= 8192 23: (bf) r1 = r0 24: (0f) r0 += r6 25: (79) r3 = *(u64 *)(r0 +0) 26: (7b) *(u64 *)(r1 +0) = r3 27: (95) exit The verifier treats this as safe, leading to oob read/write access due to an incorrect verifier conclusion: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0 last_idx 8 first_idx 0 regs=40 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe frame 0: propagating r6 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=40 stack=0 before 5: (05) goto pc+0 regs=40 stack=0 before 4: (97) r6 %= 1025 regs=40 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 from 6 to 9: safe verification time 110 usec stack depth 4 processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2 The verifier considers this program as safe by mistakenly pruning unsafe code paths. In the above func#0, code lines 0-10 are of interest. In line 0-3 registers r6 to r9 are initialized with known scalar values. In line 4 the register r6 is reset to an unknown scalar given the verifier does not track modulo operations. Due to this, the verifier can also not determine precisely which branches in line 6 and 9 are taken, therefore it needs to explore them both. As can be seen, the verifier starts with exploring the false/fall-through paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic, r6 is correctly marked for precision tracking where backtracking kicks in where it walks back the current path all the way where r6 was set to 0 in the fall-through branch. Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also here, the state of the registers is the same, that is, r6=0 and r9=0, so that at line 19 the path can be pruned as it is considered safe. It is interesting to note that the conditional in line 9 turned r6 into a more precise state, that is, in the fall-through path at the beginning of line 10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed here) at the beginning of line 11, r6 turned into a known const r6=0 as r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must be 0 (**): [...] ; R6_w=scalar() 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 [...] from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 [...] The next path is 'from 6 to 9'. The verifier considers the old and current state equivalent, and therefore prunes the search incorrectly. Looking into the two states which are being compared by the pruning logic at line 9, the old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag correctly set in the old state, r9 did not. Both r6'es are considered as equivalent given the old one is a superset of the current, more precise one, however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9 did not have reg->precise flag set, the verifier does not consider the register as contributing to the precision state of r6, and therefore it considered both r9 states as equivalent. However, for this specific pruned path (which is also the actual path taken at runtime), register r6 will be 0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map. The purpose of precision tracking is to initially mark registers (including spilled ones) as imprecise to help verifier's pruning logic finding equivalent states it can then prune if they don't contribute to the program's safety aspects. For example, if registers are used for pointer arithmetic or to pass constant length to a helper, then the verifier sets reg->precise flag and backtracks the BPF program instruction sequence and chain of verifier states to ensure that the given register or stack slot including their dependencies are marked as precisely tracked scalar. This also includes any other registers and slots that contribute to a tracked state of given registers/stack slot. This backtracking relies on recorded jmp_history and is able to traverse entire chain of parent states. This process ends only when all the necessary registers/slots and their transitive dependencies are marked as precise. The backtrack_insn() is called from the current instruction up to the first instruction, and its purpose is to compute a bitmask of registers and stack slots that need precision tracking in the parent's verifier state. For example, if a current instruction is r6 = r7, then r6 needs precision after this instruction and r7 needs precision before this instruction, that is, in the parent state. Hence for the latter r7 is marked and r6 unmarked. For the class of jmp/jmp32 instructions, backtrack_insn() today only looks at call and exit instructions and for all other conditionals the masks remain as-is. However, in the given situation register r6 has a dependency on r9 (as described above in **), so also that one needs to be marked for precision tracking. In other words, if an imprecise register influences a precise one, then the imprecise register should also be marked precise. Meaning, in the parent state both dest and src register need to be tracked for precision and therefore the marking must be more conservative by setting reg->precise flag for both. The precision propagation needs to cover both for the conditional: if the src reg was marked but not the dst reg and vice versa. After the fix the program is correctly rejected: func#0 @0 0: R1=ctx(off=0,imm=0) R10=fp0 0: (b7) r6 = 1024 ; R6_w=1024 1: (b7) r7 = 0 ; R7_w=0 2: (b7) r8 = 0 ; R8_w=0 3: (b7) r9 = -2147483648 ; R9_w=-2147483648 4: (97) r6 %= 1025 ; R6_w=scalar() 5: (05) goto pc+0 6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648 7: (97) r6 %= 1 ; R6_w=scalar() 8: (b7) r9 = 0 ; R9=0 9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0 10: (b7) r6 = 0 ; R6_w=0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 9 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=0 22: (27) r6 *= 8192 ; R6_w=0 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 19 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm???? last_idx 18 first_idx 9 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 regs=40 stack=0 before 10: (b7) r6 = 0 25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar() 27: (95) exit from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 frame 0: propagating r6 last_idx 19 first_idx 11 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0 last_idx 9 first_idx 9 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0 last_idx 8 first_idx 0 regs=240 stack=0 before 8: (b7) r9 = 0 regs=40 stack=0 before 7: (97) r6 %= 1 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 19: safe from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 9: (bd) if r6 <= r9 goto pc+1 last_idx 9 first_idx 0 regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 last_idx 9 first_idx 0 regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 11: R6=scalar(umax=18446744071562067968) R9=-2147483648 11: (b7) r0 = 0 ; R0_w=0 12: (63) *(u32 *)(r10 -4) = r0 last_idx 12 first_idx 11 regs=1 stack=0 before 11: (b7) r0 = 0 13: R0_w=0 R10=fp0 fp-8=0000???? 13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0) 16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 17: (07) r2 += -4 ; R2_w=fp-4 18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0) 19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0 20: (95) exit from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? 21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff)) 22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192) 23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0) 24: (0f) r0 += r6 last_idx 24 first_idx 21 regs=40 stack=0 before 23: (bf) r1 = r0 regs=40 stack=0 before 22: (27) r6 *= 8192 regs=40 stack=0 before 21: (77) r6 >>= 10 parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm???? last_idx 19 first_idx 11 regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1 regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1 regs=40 stack=0 before 17: (07) r2 += -4 regs=40 stack=0 before 16: (bf) r2 = r10 regs=40 stack=0 before 15: (bf) r1 = r4 regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00 regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0 regs=40 stack=0 before 11: (b7) r0 = 0 parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0 last_idx 9 first_idx 0 regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1 regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2 regs=240 stack=0 before 5: (05) goto pc+0 regs=240 stack=0 before 4: (97) r6 %= 1025 regs=240 stack=0 before 3: (b7) r9 = -2147483648 regs=40 stack=0 before 2: (b7) r8 = 0 regs=40 stack=0 before 1: (b7) r7 = 0 regs=40 stack=0 before 0: (b7) r6 = 1024 math between map_value pointer and register with unbounded min value is not allowed verification time 886 usec stack depth 4 processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2 Fixes: b5dc0163d8fd ("bpf: precise scalar_value tracking") Reported-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reported-by: Meador Inge <meadori(a)google.com> Reported-by: Simon Scannell <simonscannell(a)google.com> Reported-by: Nenad Stojanovski <thenenadx(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Co-developed-by: Andrii Nakryiko <andrii(a)kernel.org> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Reviewed-by: John Fastabend <john.fastabend(a)gmail.com> Reviewed-by: Juan Jose Lopez Jaimez <jjlopezjaimez(a)google.com> Reviewed-by: Meador Inge <meadori(a)google.com> Reviewed-by: Simon Scannell <simonscannell(a)google.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> --- kernel/bpf/verifier.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index c91533a54121..407f2263216d 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -1923,6 +1923,21 @@ static int backtrack_insn(struct bpf_verifier_env *env, int idx, } } else if (opcode == BPF_EXIT) { return -ENOTSUPP; + } else if (BPF_SRC(insn->code) == BPF_X) { + if (!(*reg_mask & (dreg | sreg))) + return 0; + /* dreg <cond> sreg + * Both dreg and sreg need precision before + * this insn. If only sreg was marked precise + * before it would be equally necessary to + * propagate it to dreg. + */ + *reg_mask |= (sreg | dreg); + /* else dreg <cond> K + * Only dreg still needs precision before + * this insn, so for the K-based conditional + * there is nothing new to be marked. + */ } } else if (class == BPF_LD) { if (!(*reg_mask & dreg)) -- 2.25.1

2 1

[PATCH 4.19 1/3] net: tap: check vlan with eth_type_vlan() method
by Yongqiang Liu 06 Jul '23

06 Jul '23

From: Menglong Dong <dong.menglong(a)zte.com.cn> mainline inclusion from mainline-v5.12-rc1-dontuse commit b69df2608281b71575fbb3b9f426dbcc4be8a700 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7IIRH CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- Replace some checks for ETH_P_8021Q and ETH_P_8021AD in drivers/net/tap.c with eth_type_vlan. Signed-off-by: Menglong Dong <dong.menglong(a)zte.com.cn> Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Liu Jian <liujian56(a)huawei.com> Conflicts: drivers/net/tap.c Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/net/tap.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/tap.c b/drivers/net/tap.c index 43012a195b71..bea824a92974 100644 --- a/drivers/net/tap.c +++ b/drivers/net/tap.c @@ -715,8 +715,7 @@ static ssize_t tap_get_user(struct tap_queue *q, struct msghdr *m, skb_probe_transport_header(skb, ETH_HLEN); /* Move network header to the right position for VLAN tagged packets */ - if ((skb->protocol == htons(ETH_P_8021Q) || - skb->protocol == htons(ETH_P_8021AD)) && + if (eth_type_vlan(skb->protocol) && __vlan_get_protocol(skb, skb->protocol, &depth) != 0) skb_set_network_header(skb, depth); -- 2.25.1

1 2

[PATCH OLK-5.10] Huawei BMA: To fix the bug in the iBMA driver code
by Jialin Zhang 06 Jul '23

06 Jul '23

From: Huajingjing <huajingjing1(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FQ05 CVE: NA ----------------------------------------- 1. a low probability that iBMA cdev_veth driver causes softlockup problem 2. a low probability that iBMA veth driver causes soft interrupt loops 3. Change the iBMA driver version. Signed-off-by: Huajingjing <huajingjing1(a)huawei.com> Reviewed-by: Chenjiesong <chenjiesong(a)huawei.com> Reviewed-by: Huangjunhua <huangjunhua14(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- .../net/ethernet/huawei/bma/cdev_drv/bma_cdev.c | 2 +- .../bma/cdev_veth_drv/virtual_cdev_eth_net.c | 14 ++++++++------ drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h | 2 +- .../ethernet/huawei/bma/kbox_drv/kbox_include.h | 2 +- drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c | 10 +++++++++- drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h | 2 +- 6 files changed, 21 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c b/drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c index 9468a5a0c768..9022ceaa8f47 100644 --- a/drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c +++ b/drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c @@ -28,7 +28,7 @@ #ifdef DRV_VERSION #define CDEV_VERSION MICRO_TO_STR(DRV_VERSION) #else -#define CDEV_VERSION "0.3.5" +#define CDEV_VERSION "0.3.6" #endif #define CDEV_DEFAULT_NUM 4 diff --git a/drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c b/drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c index d8c3ab655566..e6dbec7073e4 100644 --- a/drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c +++ b/drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c @@ -667,6 +667,7 @@ static int edma_veth_copy_full_packet(struct edma_eth_dev_s *eth_dev, u8 *packet, u32 len) { unsigned int count = 0; + unsigned long flags = 0; u8 *ptr = NULL; LOG(DLOG_DEBUG, "Recv full packet, len %u.", len); @@ -674,14 +675,14 @@ static int edma_veth_copy_full_packet(struct edma_eth_dev_s *eth_dev, ptr = kmalloc(len, GFP_ATOMIC); if (ptr) { /* lock the queue. */ - spin_lock(&eth_dev->rx_queue_lock); + spin_lock_irqsave(&eth_dev->rx_queue_lock, flags); count = edma_veth_get_ring_buf_count(eth_dev->rx_packet_head, eth_dev->rx_packet_tail, MAX_RXTX_PACKET_LEN); if (count >= (MAX_RXTX_PACKET_LEN - 1)) { LOG(DLOG_DEBUG, "The rx queue is full."); - spin_unlock(&eth_dev->rx_queue_lock); + spin_unlock_irqrestore(&eth_dev->rx_queue_lock, flags); kfree(ptr); return -EBUSY; } @@ -692,7 +693,7 @@ static int edma_veth_copy_full_packet(struct edma_eth_dev_s *eth_dev, eth_dev->rx_packet_tail = (eth_dev->rx_packet_tail + 1) % MAX_RXTX_PACKET_LEN; - spin_unlock(&eth_dev->rx_queue_lock); + spin_unlock_irqrestore(&eth_dev->rx_queue_lock, flags); return 0; } @@ -1672,16 +1673,17 @@ static ssize_t cdev_copy_packet_to_user(struct edma_eth_dev_s *dev, unsigned char *packet = NULL; unsigned char *start = NULL; unsigned int free_packet = 0; + unsigned long flags = 0; ssize_t length = (ssize_t)count; ssize_t left; LOG(DLOG_DEBUG, "rx_packet_head:%u, rx_packet_tail: %u", dev->rx_packet_head, dev->rx_packet_tail); - spin_lock(&dev->rx_queue_lock); + spin_lock_irqsave(&dev->rx_queue_lock, flags); if (!cdev_check_ring_recv()) { - spin_unlock(&dev->rx_queue_lock); + spin_unlock_irqrestore(&dev->rx_queue_lock, flags); return -EAGAIN; } @@ -1712,7 +1714,7 @@ static ssize_t cdev_copy_packet_to_user(struct edma_eth_dev_s *dev, MAX_RXTX_PACKET_LEN; } - spin_unlock(&dev->rx_queue_lock); + spin_unlock_irqrestore(&dev->rx_queue_lock, flags); if (length > 0 && copy_to_user(data, start, length)) { LOG(DLOG_DEBUG, "Failed to copy to user, skip this message."); diff --git a/drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h b/drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h index 639ed4e58a8b..9eca34e6d47d 100644 --- a/drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h +++ b/drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h @@ -71,7 +71,7 @@ struct bma_pci_dev_s { #ifdef DRV_VERSION #define BMA_VERSION MICRO_TO_STR(DRV_VERSION) #else -#define BMA_VERSION "0.3.5" +#define BMA_VERSION "0.3.6" #endif #ifdef CONFIG_ARM64 diff --git a/drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h b/drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h index b027306e52c1..5406246ef548 100644 --- a/drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h +++ b/drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h @@ -23,7 +23,7 @@ #ifdef DRV_VERSION #define KBOX_VERSION MICRO_TO_STR(DRV_VERSION) #else -#define KBOX_VERSION "0.3.5" +#define KBOX_VERSION "0.3.6" #endif #define UNUSED(x) (x = x) diff --git a/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c b/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c index 7705bb919ead..6a7175c6206c 100644 --- a/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c +++ b/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c @@ -87,6 +87,12 @@ u32 g_testlbk; struct bspveth_device g_bspveth_dev = {}; +/* g_shutdown_flag is used to prevent veth_shutdown_task + * from being preempted by veth_dma_tx_timer_do_H. + * The default value is 0.The value 1 indicates that veth_shutdown_flag cannot be preempted, + * and the value 0 indicates that veth_shutdown_task can be preempted. + */ +static int g_shutdown_flag; static int veth_int_handler(struct notifier_block *pthis, unsigned long ev, void *unuse); @@ -1607,6 +1613,7 @@ void veth_netdev_exit(void) static void veth_shutdown_task(struct work_struct *work) { struct net_device *netdev = g_bspveth_dev.pnetdev; + g_shutdown_flag = 1; VETH_LOG(DLOG_ERROR, "veth is going down, please restart it manual\n"); @@ -1626,6 +1633,7 @@ static void veth_shutdown_task(struct work_struct *work) (void)veth_dmatimer_close_H(); } + g_shutdown_flag = 0; } s32 veth_netdev_init(void) @@ -1728,7 +1736,7 @@ void veth_dma_tx_timer_do_H(unsigned long data) rxret = veth_dma_task_H(BSPVETH_RX); - if (txret == BSP_ERR_AGAIN || rxret == BSP_ERR_AGAIN) { + if ((txret == BSP_ERR_AGAIN || rxret == BSP_ERR_AGAIN) && (g_shutdown_flag == 0)) { #ifndef USE_TASKLET (void)mod_timer(&g_bspveth_dev.dmatimer, jiffies_64); #else diff --git a/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h b/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h index 503636549320..777a9bbc4ac1 100644 --- a/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h +++ b/drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h @@ -31,7 +31,7 @@ extern "C" { #ifdef DRV_VERSION #define VETH_VERSION MICRO_TO_STR(DRV_VERSION) #else -#define VETH_VERSION "0.3.5" +#define VETH_VERSION "0.3.6" #endif #define MODULE_NAME "veth" -- 2.25.1

2 1

[PATCH OLK-5.10 v2 0/5] jbd2: fix several checkpoint
by Zhihao Cheng 05 Jul '23

05 Jul '23

Zhang Yi (4): jbd2: remove journal_clean_one_cp_list() jbd2: fix a race when checking checkpoint buffer busy jbd2: remove __journal_try_to_free_buffer() jbd2: fix checkpoint cleanup performance regression Zhihao Cheng (1): jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint fs/jbd2/checkpoint.c | 147 ++++++++++++++++++------------------ fs/jbd2/transaction.c | 40 ++-------- include/linux/jbd2.h | 1 + include/trace/events/jbd2.h | 12 +-- 4 files changed, 87 insertions(+), 113 deletions(-) -- 2.31.1

2 6

[PATCH OLK-5.10 v2] io_uring: hold uring mutex around poll removal
by Zhong Jinghua 05 Jul '23

05 Jul '23

From: Jens Axboe <axboe(a)kernel.dk> stable inclusion from stable-v5.10.185 commit 4716c73b188566865bdd79c3a6709696a224ac04 category: bugfix bugzilla: 188954, https://gitee.com/src-openeuler/kernel/issues/I7GVI5?from=project-issue CVE: CVE-2023-3389 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Snipped from commit 9ca9fb24d5febccea354089c41f96a8ad0d853f8 upstream. While reworking the poll hashing in the v6.0 kernel, we ended up grabbing the ctx->uring_lock in poll update/removal. This also fixed a bug with linked timeouts racing with timeout expiry and poll removal. Bring back just the locking fix for that. Reported-and-tested-by: Querijn Voet <querijnqyn(a)gmail.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> --- v2: cve number modify. io_uring/io_uring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 67cb9d6ec4ac..f6af5ceb517e 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -5811,6 +5811,8 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) struct io_kiocb *preq; int ret2, ret = 0; + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + spin_lock(&ctx->completion_lock); preq = io_poll_find(ctx, req->poll_update.old_user_data, true); if (!preq || !io_poll_disarm(preq)) { @@ -5842,6 +5844,7 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) req_set_fail(req); /* complete update request, we're done with it */ io_req_complete(req, ret); + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); return 0; } -- 2.31.1

2 1

[PATCH openEuler-1.0-LTS 0/5] jbd2: fix several checkpoint
by Zhihao Cheng 05 Jul '23

05 Jul '23

Zhang Yi (4): jbd2: remove journal_clean_one_cp_list() jbd2: fix a race when checking checkpoint buffer busy jbd2: remove __journal_try_to_free_buffer() jbd2: fix checkpoint cleanup performance regression Zhihao Cheng (1): jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint fs/jbd2/checkpoint.c | 147 ++++++++++++++++++------------------ fs/jbd2/transaction.c | 40 ++-------- include/linux/jbd2.h | 1 + include/trace/events/jbd2.h | 12 +-- 4 files changed, 87 insertions(+), 113 deletions(-) -- 2.31.1

2 6

[PATCH OLK-5.10] io_uring: hold uring mutex around poll removal
by Zhong Jinghua 05 Jul '23

05 Jul '23

From: Jens Axboe <axboe(a)kernel.dk> stable inclusion from stable-v5.10.185 commit 4716c73b188566865bdd79c3a6709696a224ac04 category: bugfix bugzilla: 188954, https://gitee.com/src-openeuler/kernel/issues/I5X879?from=project-issue CVE: CVE-2022-3238 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Snipped from commit 9ca9fb24d5febccea354089c41f96a8ad0d853f8 upstream. While reworking the poll hashing in the v6.0 kernel, we ended up grabbing the ctx->uring_lock in poll update/removal. This also fixed a bug with linked timeouts racing with timeout expiry and poll removal. Bring back just the locking fix for that. Reported-and-tested-by: Querijn Voet <querijnqyn(a)gmail.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> --- io_uring/io_uring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 67cb9d6ec4ac..f6af5ceb517e 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -5811,6 +5811,8 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) struct io_kiocb *preq; int ret2, ret = 0; + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + spin_lock(&ctx->completion_lock); preq = io_poll_find(ctx, req->poll_update.old_user_data, true); if (!preq || !io_poll_disarm(preq)) { @@ -5842,6 +5844,7 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) req_set_fail(req); /* complete update request, we're done with it */ io_req_complete(req, ret); + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); return 0; } -- 2.31.1

2 1

[PATCH OLK-5.10] io_uring: hold uring mutex around poll removal
by Zhong Jinghua 05 Jul '23

05 Jul '23

From: Jens Axboe <axboe(a)kernel.dk> stable inclusion from stable-v5.10.185 commit 4716c73b188566865bdd79c3a6709696a224ac04 category: bugfix bugzilla: 188954, https://gitee.com/src-openeuler/kernel/issues/I5X879?from=project-issue CVE: CVE-2022-3238 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Snipped from commit 9ca9fb24d5febccea354089c41f96a8ad0d853f8 upstream. While reworking the poll hashing in the v6.0 kernel, we ended up grabbing the ctx->uring_lock in poll update/removal. This also fixed a bug with linked timeouts racing with timeout expiry and poll removal. Bring back just the locking fix for that. Reported-and-tested-by: Querijn Voet <querijnqyn(a)gmail.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> --- io_uring/io_uring.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index 67cb9d6ec4ac..f6af5ceb517e 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -5811,6 +5811,8 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) struct io_kiocb *preq; int ret2, ret = 0; + io_ring_submit_lock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); + spin_lock(&ctx->completion_lock); preq = io_poll_find(ctx, req->poll_update.old_user_data, true); if (!preq || !io_poll_disarm(preq)) { @@ -5842,6 +5844,7 @@ static int io_poll_update(struct io_kiocb *req, unsigned int issue_flags) req_set_fail(req); /* complete update request, we're done with it */ io_req_complete(req, ret); + io_ring_submit_unlock(ctx, !(issue_flags & IO_URING_F_NONBLOCK)); return 0; } -- 2.31.1

2 1

[PATCH openEuler-1.0-LTS 1/3] nbd: fold nbd config initialization into nbd_alloc_config()
by Yongqiang Liu 05 Jul '23

05 Jul '23

From: Yu Kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7EENU CVE: NA ---------------------------------------- There are no functional changes, make the code cleaner and prepare to fix null-ptr-dereference while accessing 'nbd->config'. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> conflict: drivers/block/nbd.c Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Reviewed-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/block/nbd.c | 41 +++++++++++++++++++---------------------- 1 file changed, 19 insertions(+), 22 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index c306e9ffdd08..602679ce390f 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1469,17 +1469,20 @@ static int nbd_ioctl(struct block_device *bdev, fmode_t mode, return error; } -static struct nbd_config *nbd_alloc_config(void) +static int nbd_alloc_and_init_config(struct nbd_device *nbd) { struct nbd_config *config; + if (WARN_ON(nbd->config)) + return -EINVAL; + if (!try_module_get(THIS_MODULE)) - return ERR_PTR(-ENODEV); + return -ENODEV; config = kzalloc(sizeof(struct nbd_config), GFP_NOFS); if (!config) { module_put(THIS_MODULE); - return ERR_PTR(-ENOMEM); + return -ENOMEM; } atomic_set(&config->recv_threads, 0); @@ -1487,7 +1490,10 @@ static struct nbd_config *nbd_alloc_config(void) init_waitqueue_head(&config->conn_wait); config->blksize = NBD_DEF_BLKSIZE; atomic_set(&config->live_connections, 0); - return config; + nbd->config = config; + refcount_set(&nbd->config_refs, 1); + + return 0; } static int nbd_open(struct block_device *bdev, fmode_t mode) @@ -1506,21 +1512,17 @@ static int nbd_open(struct block_device *bdev, fmode_t mode) goto out; } if (!refcount_inc_not_zero(&nbd->config_refs)) { - struct nbd_config *config; - mutex_lock(&nbd->config_lock); if (refcount_inc_not_zero(&nbd->config_refs)) { mutex_unlock(&nbd->config_lock); goto out; } - config = nbd_alloc_config(); - if (IS_ERR(config)) { - ret = PTR_ERR(config); + ret = nbd_alloc_and_init_config(nbd); + if (ret) { mutex_unlock(&nbd->config_lock); goto out; } - nbd->config = config; - refcount_set(&nbd->config_refs, 1); + refcount_inc(&nbd->refs); mutex_unlock(&nbd->config_lock); bdev->bd_invalidated = 1; @@ -1924,22 +1926,17 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info) printk(KERN_ERR "nbd: nbd%d already in use\n", index); return -EBUSY; } - if (WARN_ON(nbd->config)) { - mutex_unlock(&nbd->config_lock); - nbd_put(nbd); - return -EINVAL; - } - config = nbd_alloc_config(); - if (IS_ERR(config)) { + + ret = nbd_alloc_and_init_config(nbd); + if (ret) { mutex_unlock(&nbd->config_lock); nbd_put(nbd); printk(KERN_ERR "nbd: couldn't allocate config\n"); - return PTR_ERR(config); + return ret; } - nbd->config = config; - refcount_set(&nbd->config_refs, 1); - set_bit(NBD_RT_BOUND, &config->runtime_flags); + config = nbd->config; + set_bit(NBD_RT_BOUND, &config->runtime_flags); if (info->attrs[NBD_ATTR_SIZE_BYTES]) { u64 bytes = nla_get_u64(info->attrs[NBD_ATTR_SIZE_BYTES]); ret = nbd_set_size(nbd, bytes, config->blksize); -- 2.25.1

1 2

[PATCH OLK-5.10 0/7] jbd2: fix several checkpoint inconsistent
by Zhihao Cheng 05 Jul '23

05 Jul '23

Zhang Yi (6): jbd2: recheck chechpointing non-dirty buffer jbd2: remove t_checkpoint_io_list jbd2: remove journal_clean_one_cp_list() jbd2: fix a race when checking checkpoint buffer busy jbd2: remove __journal_try_to_free_buffer() jbd2: fix checkpoint cleanup performance regression Zhihao Cheng (1): jbd2: Fix wrongly judgement for buffer head removing while doing checkpoint fs/jbd2/checkpoint.c | 281 +++++++++++++----------------------- fs/jbd2/commit.c | 3 +- fs/jbd2/transaction.c | 40 +---- include/linux/jbd2.h | 1 + include/trace/events/jbd2.h | 12 +- 5 files changed, 114 insertions(+), 223 deletions(-) -- 2.31.1

1 7

[PATCH openEuler-1.0-LTS] ext4: Stop trying writing pages if no free blocks generated
by Zhihao Cheng 05 Jul '23

05 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7CBCS CVE: NA -------------------------------- Folllowing steps could make ext4_wripages trap into a dead loop: 1. Consume free_clusters until free_clusters > 2 * sbi->s_resv_clusters, and free_clusters > EXT4_FREECLUSTERS_WATERMARK. // eg. free_clusters = 1422, sbi->s_resv_clusters = 512 // nr_cpus = 4, EXT4_FREECLUSTERS_WATERMARK = 512 2. umount && mount. // dirty_clusters = 0 3. Run free_clusters tasks concurrently to write different files, many tasks write(appendant) 4K data by da_write method. And each inode will consume one data block and one extent block in map_block. // There are (free_clusters - EXT4_FREECLUSTERS_WATERMARK = 910) // tasks choosing da_write method, left 512 tasks choose write_begin // method. If tasks which chooses da_write path run first. // dirty_clusters = 910, free_clusters = 1422 // Tasks which choose write_begin path will get ENOSPC: // free_clusters < (nclusters + dirty_clusters + resv_clusters) // 1422 < (1 + 910 + 512) 4. After certain number of map_block iterations in ext4_writepages. // free_clusters = 0, // dirty_clusters = 910 - (1422 / 2) = 199 5. Delete one 4K file. // free_clusters = 1 6. ext4_writepages traps into dead loop: mpage_map_and_submit_extent mpage_map_one_extent // ret = ENOSPC ext4_map_blocks -> ext4_ext_map_blocks -> ext4_mb_new_blocks -> ext4_claim_free_clusters: if (free_clusters >= (nclusters + dirty_clusters)) // false if (err == -ENOSPC && ext4_count_free_clusters(sb)) // true return err *give_up_on_write = true // won't be executed Fix it by terminating ext4_writepages if no free blocks generated. Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 4 +++- fs/ext4/inode.c | 2 +- fs/ext4/mballoc.c | 5 +++-- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 6df919b154b4..3165fc239036 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -656,6 +656,7 @@ enum { #define EXT4_FREE_BLOCKS_NO_QUOT_UPDATE 0x0008 #define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010 #define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020 +#define EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL 0x0080 /* * ioctl commands diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6edab0ef28fd..379d91d54d5e 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1328,7 +1328,8 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode, if (!ablocks[i]) continue; ext4_free_blocks(handle, inode, NULL, ablocks[i], 1, - EXT4_FREE_BLOCKS_METADATA); + EXT4_FREE_BLOCKS_METADATA | + EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL); } } kfree(ablocks); @@ -4606,6 +4607,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, /* not a good idea to call discard here directly, * but otherwise we'd need to call it every free() */ ext4_discard_preallocations(inode); + fb_flags |= EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL; ext4_free_blocks(handle, inode, NULL, newblock, EXT4_C2B(sbi, allocated_clusters), fb_flags); goto out2; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c40f4442c5c3..e547abd0cdc4 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2525,7 +2525,7 @@ static int mpage_map_and_submit_extent(handle_t *handle, * is non-zero, a commit should free up blocks. */ if ((err == -ENOMEM) || - (err == -ENOSPC && ext4_count_free_clusters(sb))) { + (err == -ENOSPC && EXT4_SB(sb)->s_mb_free_pending)) { if (progress) goto update_disksize; return err; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a40990da0b62..84a3e09433ac 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4921,8 +4921,9 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, * consistency guarantees. */ if (ext4_handle_valid(handle) && - ((flags & EXT4_FREE_BLOCKS_METADATA) || - !ext4_should_writeback_data(inode))) { + (((flags & EXT4_FREE_BLOCKS_METADATA) || + !ext4_should_writeback_data(inode)) && + !(flags & EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL))) { struct ext4_free_data *new_entry; /* * We use __GFP_NOFAIL because ext4_free_blocks() is not allowed -- 2.31.1

2 1

[PATCH OLK-5.10] ext4: Stop trying writing pages if no free blocks generated
by Zhihao Cheng 05 Jul '23

05 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7CBCS -------------------------------- Folllowing steps could make ext4_wripages trap into a dead loop: 1. Consume free_clusters until free_clusters > 2 * sbi->s_resv_clusters, and free_clusters > EXT4_FREECLUSTERS_WATERMARK. // eg. free_clusters = 1422, sbi->s_resv_clusters = 512 // nr_cpus = 4, EXT4_FREECLUSTERS_WATERMARK = 512 2. umount && mount. // dirty_clusters = 0 3. Run free_clusters tasks concurrently to write different files, many tasks write(appendant) 4K data by da_write method. And each inode will consume one data block and one extent block in map_block. // There are (free_clusters - EXT4_FREECLUSTERS_WATERMARK = 910) // tasks choosing da_write method, left 512 tasks choose write_begin // method. If tasks which chooses da_write path run first. // dirty_clusters = 910, free_clusters = 1422 // Tasks which choose write_begin path will get ENOSPC: // free_clusters < (nclusters + dirty_clusters + resv_clusters) // 1422 < (1 + 910 + 512) 4. After certain number of map_block iterations in ext4_writepages. // free_clusters = 0, // dirty_clusters = 910 - (1422 / 2) = 199 5. Delete one 4K file. // free_clusters = 1 6. ext4_writepages traps into dead loop: mpage_map_and_submit_extent mpage_map_one_extent // ret = ENOSPC ext4_map_blocks -> ext4_ext_map_blocks -> ext4_mb_new_blocks -> ext4_claim_free_clusters: if (free_clusters >= (nclusters + dirty_clusters)) // false if (err == -ENOSPC && ext4_count_free_clusters(sb)) // true return err *give_up_on_write = true // won't be executed Fix it by terminating ext4_writepages if no free blocks generated. Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 4 +++- fs/ext4/inode.c | 2 +- fs/ext4/mballoc.c | 5 +++-- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 5d5ae6f44510..48d02bea4984 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -700,6 +700,7 @@ enum { #define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010 #define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020 #define EXT4_FREE_BLOCKS_RERESERVE_CLUSTER 0x0040 +#define EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL 0x0080 /* * ioctl commands diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e42a78170109..b1eb4ea2c68a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1294,7 +1294,8 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode, if (!ablocks[i]) continue; ext4_free_blocks(handle, inode, NULL, ablocks[i], 1, - EXT4_FREE_BLOCKS_METADATA); + EXT4_FREE_BLOCKS_METADATA | + EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL); } } kfree(ablocks); @@ -4329,6 +4330,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, ext4_discard_preallocations(inode, 0); if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) fb_flags = EXT4_FREE_BLOCKS_NO_QUOT_UPDATE; + fb_flags |= EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL; ext4_free_blocks(handle, inode, NULL, newblock, EXT4_C2B(sbi, allocated_clusters), fb_flags); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 44018d1da27e..ebb794fed3a7 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2479,7 +2479,7 @@ static int mpage_map_and_submit_extent(handle_t *handle, * is non-zero, a commit should free up blocks. */ if ((err == -ENOMEM) || - (err == -ENOSPC && ext4_count_free_clusters(sb))) { + (err == -ENOSPC && EXT4_SB(sb)->s_mb_free_pending)) { if (progress) goto update_disksize; return err; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index fd8464aadf00..3870dff5f2e7 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -5498,8 +5498,9 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, * consistency guarantees. */ if (ext4_handle_valid(handle) && - ((flags & EXT4_FREE_BLOCKS_METADATA) || - !ext4_should_writeback_data(inode))) { + (((flags & EXT4_FREE_BLOCKS_METADATA) || + !ext4_should_writeback_data(inode)) && + !(flags & EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL))) { struct ext4_free_data *new_entry; /* * We use __GFP_NOFAIL because ext4_free_blocks() is not allowed -- 2.31.1

2 1

[PATCH openEuler-22.03-LTS] ipv6: sr: fix out-of-bounds read when setting HMAC data.
by Ziyang Xuan 05 Jul '23

05 Jul '23

From: David Lebrun <dlebrun(a)google.com> stable inclusion from stable-v5.10.143 commit 076f2479fc5a15c4a970ca3b5e57d42ba09a31fa category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ASU6 CVE: CVE-2023-2860 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw(a)gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/ipv6/seg6.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c index bff6bc75cfb7..45e3f1b552e0 100644 --- a/net/ipv6/seg6.c +++ b/net/ipv6/seg6.c @@ -135,6 +135,11 @@ static int seg6_genl_sethmac(struct sk_buff *skb, struct genl_info *info) goto out_unlock; } + if (slen > nla_len(info->attrs[SEG6_ATTR_SECRET])) { + err = -EINVAL; + goto out_unlock; + } + if (hinfo) { err = seg6_hmac_info_del(net, hmackeyid); if (err) -- 2.25.1

2 1

[PATCH OLK-5.10 0/5] quota: fix race condition between dqput() and dquot_mark_dquot_dirty()
by Baokun Li 05 Jul '23

05 Jul '23

Baokun Li (5): quota: factor out dquot_write_dquot() quota: rename dquot_active() to inode_quota_active() quota: add new helper dquot_active() quota: fix dqput() to follow the guarantees dquot_srcu should provide quota: simplify drop_dquot_ref() fs/quota/dquot.c | 244 ++++++++++++++++++++++++----------------------- 1 file changed, 125 insertions(+), 119 deletions(-) -- 2.31.1

2 6

[PATCH openEuler-1.0-LTS] ipvlan:Fix out-of-bounds caused by unclear skb->cb
by Yongqiang Liu 05 Jul '23

05 Jul '23

From: "t.feng" <fengtao40(a)huawei.com> stable inclusion from stable-v4.19.284 commit b36dcf3ed547c103acef6f52bed000a0ac6c074f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7GVI1 CVE: CVE-2023-3090 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40(a)huawei.com> Suggested-by: Florian Westphal <fw(a)strlen.de> Reviewed-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index a83c22d46896..32dca624356f 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -443,6 +443,9 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, &rt->dst); + + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + err = ip_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; @@ -481,6 +484,9 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, dst); + + memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + err = ip6_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; -- 2.25.1

2 1

[PATCH OLK-5.10] iommu/iova: move IOVA_MAX_GLOBAL_MAGS outside of IOMMU_SUPPORT
by Zhang Zekun 04 Jul '23

04 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7I3P1 CVE: NA -------------------------------------------- The commit 0227a749c263db30ef5d49fc009a5161ae70cfab introduce a config CONFIG_IOVA_MAX_GLOBAL_MAGS, but it relies on IOMMU_SUPPORT. Some drivers can compile without IOMMU_SUPPORT, but still include include/linux/iova.h, which can cause compile problem. Fix this by moving the definition of CONFIG_IOVA_MAX_GLOBAL_MAGS out of IOMMU_SUPPORT. The error compile message is showned as below: In file included from ./include/linux/intel-iommu.h:14, from ./include/drm/intel-gtt.h:8, from drivers/char/agp/intel-agp.c:15: ./include/linux/iova.h:29:25: error: ‘CONFIG_IOVA_MAX_GLOBAL_MAGS’ undeclared here (not in a function) 29 | #define MAX_GLOBAL_MAGS CONFIG_IOVA_MAX_GLOBAL_MAGS /* magazines per bin */ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/iova.h:34:30: note: in expansion of macro ‘MAX_GLOBAL_MAGS’ 34 | struct iova_magazine *depot[MAX_GLOBAL_MAGS]; | ^~~~~~~~~~~~~~~ In file included from ./include/linux/intel-iommu.h:14, from ./include/drm/intel-gtt.h:8, from drivers/char/agp/intel-gtt.c:27: ./include/linux/iova.h:29:25: error: ‘CONFIG_IOVA_MAX_GLOBAL_MAGS’ undeclared here (not in a function) 29 | #define MAX_GLOBAL_MAGS CONFIG_IOVA_MAX_GLOBAL_MAGS /* magazines per bin */ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/iova.h:34:30: note: in expansion of macro ‘MAX_GLOBAL_MAGS’ 34 | struct iova_magazine *depot[MAX_GLOBAL_MAGS]; | ^~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:286: drivers/char/agp/intel-agp.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [scripts/Makefile.build:286: drivers/char/agp/intel-gtt.o] Error 1 make[2]: *** [scripts/Makefile.build:503: drivers/char/agp] Error 2 make[1]: *** [scripts/Makefile.build:503: drivers/char] Error 2 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- drivers/iommu/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 54d4a8cc3876..b630e58c49b6 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -437,6 +437,9 @@ config SMMU_BYPASS_DEV This feature will be replaced by ACPI IORT RMR node, which will be upstreamed in mainline. + +endif # IOMMU_SUPPORT + config IOVA_MAX_GLOBAL_MAGS int "Set the max iova global magzines in iova rcache" range 16 2048 @@ -446,6 +449,3 @@ config IOVA_MAX_GLOBAL_MAGS it can be a bottle neck when lots of cpus are contending to use it. If you are suffering from the speed of allocing iova with more than 128 cpus, try to tune this config larger. - - -endif # IOMMU_SUPPORT -- 2.17.1

2 1

[PATCH OLK-5.10 0/2] blk-wbt: don't show valid wbt_lat_usec in
by Li Lingfeng 03 Jul '23

03 Jul '23

Yu Kuai (2): blk-wbt: make enable_state more accurate blk-wbt: don't show valid wbt_lat_usec in sysfs while wbt is disabled block/blk-sysfs.c | 3 +++ block/blk-wbt.c | 15 ++++++++++++++- block/blk-wbt.h | 17 ++++++++++++----- 3 files changed, 29 insertions(+), 6 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10] dm stats: check for and propagate alloc_percpu failure
by Li Lingfeng 03 Jul '23

03 Jul '23

From: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> mainline inclusion from mainline-v6.3-rc4 commit d3aa3e060c4a80827eb801fc448debc9daa7c46b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7I2L8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used. Fixes: fd2ed4d25270 ("dm: add statistics support") Cc: stable(a)vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-stats.c drivers/md/dm.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-stats.c | 7 ++++++- drivers/md/dm-stats.h | 2 +- drivers/md/dm.c | 4 +++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c index 55443a6598fa..4029281ca383 100644 --- a/drivers/md/dm-stats.c +++ b/drivers/md/dm-stats.c @@ -188,7 +188,7 @@ static int dm_stat_in_flight(struct dm_stat_shared *shared) atomic_read(&shared->in_flight[WRITE]); } -void dm_stats_init(struct dm_stats *stats) +int dm_stats_init(struct dm_stats *stats) { int cpu; struct dm_stats_last_position *last; @@ -196,11 +196,16 @@ void dm_stats_init(struct dm_stats *stats) mutex_init(&stats->mutex); INIT_LIST_HEAD(&stats->list); stats->last = alloc_percpu(struct dm_stats_last_position); + if (!stats->last) + return -ENOMEM; + for_each_possible_cpu(cpu) { last = per_cpu_ptr(stats->last, cpu); last->last_sector = (sector_t)ULLONG_MAX; last->last_rw = UINT_MAX; } + + return 0; } void dm_stats_cleanup(struct dm_stats *stats) diff --git a/drivers/md/dm-stats.h b/drivers/md/dm-stats.h index 2ddfae678f32..dcac11fce03b 100644 --- a/drivers/md/dm-stats.h +++ b/drivers/md/dm-stats.h @@ -22,7 +22,7 @@ struct dm_stats_aux { unsigned long long duration_ns; }; -void dm_stats_init(struct dm_stats *st); +int dm_stats_init(struct dm_stats *st); void dm_stats_cleanup(struct dm_stats *st); struct mapped_device; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 1cb2a84f2403..0c9ce43f3b53 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1904,7 +1904,9 @@ static struct mapped_device *alloc_dev(int minor) if (!md->bdev) goto bad; - dm_stats_init(&md->stats); + r = dm_stats_init(&md->stats); + if (r < 0) + goto bad; /* Populate the mapping, nobody knows we exist yet */ spin_lock(&_minor_lock); -- 2.31.1

2 1

[PATCH v3 OLK-5.10 0/2] Add lz4k support for zram
by Tu Jinjiang 03 Jul '23

03 Jul '23

Change log: v3: - update size_bytes_count() to make it compile sucessfully on 32-bit architecture. - fix some style problem. v2: - fix some style problem. Tu Jinjiang (2): crypto: add lz4k Cryptographic API mm/zram: Add lz4k support for zram crypto/Kconfig | 8 + crypto/Makefile | 1 + crypto/lz4k.c | 100 ++++++ drivers/block/zram/zcomp.c | 3 + include/linux/lz4k.h | 384 +++++++++++++++++++++++ lib/Kconfig | 6 + lib/Makefile | 2 + lib/lz4k/Makefile | 2 + lib/lz4k/lz4k_decode.c | 314 +++++++++++++++++++ lib/lz4k/lz4k_encode.c | 554 +++++++++++++++++++++++++++++++++ lib/lz4k/lz4k_encode_private.h | 142 +++++++++ lib/lz4k/lz4k_private.h | 282 +++++++++++++++++ 12 files changed, 1798 insertions(+) create mode 100644 crypto/lz4k.c create mode 100644 include/linux/lz4k.h create mode 100644 lib/lz4k/Makefile create mode 100644 lib/lz4k/lz4k_decode.c create mode 100644 lib/lz4k/lz4k_encode.c create mode 100644 lib/lz4k/lz4k_encode_private.h create mode 100644 lib/lz4k/lz4k_private.h -- 2.25.1

2 3

[PATCH OLK-5.10] ipvlan:Fix out-of-bounds caused by unclear skb->cb
by Zhengchao Shao 03 Jul '23

03 Jul '23

From: "t.feng" <fengtao40(a)huawei.com> stable inclusion from stable-v5.10.181 commit f4a371d3f5a7a71dff1ab48b3122c5cf23cc7ad5 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7GVI1 CVE: CVE-2023-3090 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40(a)huawei.com> Suggested-by: Florian Westphal <fw(a)strlen.de> Reviewed-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 1c2d92b43639..03fe656c543f 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -437,6 +437,9 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, &rt->dst); + + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + err = ip_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; @@ -475,6 +478,9 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, dst); + + memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + err = ip6_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; -- 2.34.1

2 1

[PATCH OLK-5.10] ext4: turning quotas off if mount failed after enable quotas
by Baokun Li 01 Jul '23

01 Jul '23

mainline inclusion from mainline-v6.5 commit d13f99632748462c32fc95d729f5e754bab06064 category: bugfix bugzilla: 188906, https://gitee.com/openeuler/kernel/issues/I7E9M5 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Yi found during a review of the patch "ext4: don't BUG on inconsistent journal feature" that when ext4_mark_recovery_complete() returns an error value, the error handling path does not turn off the enabled quotas, which triggers the following kmemleak: ================================================================ unreferenced object 0xffff8cf68678e7c0 (size 64): comm "mount", pid 746, jiffies 4294871231 (age 11.540s) hex dump (first 32 bytes): 00 90 ef 82 f6 8c ff ff 00 00 00 00 41 01 00 00 ............A... c7 00 00 00 bd 00 00 00 0a 00 00 00 48 00 00 00 ............H... backtrace: [<00000000c561ef24>] __kmem_cache_alloc_node+0x4d4/0x880 [<00000000d4e621d7>] kmalloc_trace+0x39/0x140 [<00000000837eee74>] v2_read_file_info+0x18a/0x3a0 [<0000000088f6c877>] dquot_load_quota_sb+0x2ed/0x770 [<00000000340a4782>] dquot_load_quota_inode+0xc6/0x1c0 [<0000000089a18bd5>] ext4_enable_quotas+0x17e/0x3a0 [ext4] [<000000003a0268fa>] __ext4_fill_super+0x3448/0x3910 [ext4] [<00000000b0f2a8a8>] ext4_fill_super+0x13d/0x340 [ext4] [<000000004a9489c4>] get_tree_bdev+0x1dc/0x370 [<000000006e723bf1>] ext4_get_tree+0x1d/0x30 [ext4] [<00000000c7cb663d>] vfs_get_tree+0x31/0x160 [<00000000320e1bed>] do_new_mount+0x1d5/0x480 [<00000000c074654c>] path_mount+0x22e/0xbe0 [<0000000003e97a8e>] do_mount+0x95/0xc0 [<000000002f3d3736>] __x64_sys_mount+0xc4/0x160 [<0000000027d2140c>] do_syscall_64+0x3f/0x90 ================================================================ To solve this problem, we add a "failed_mount10" tag, and call ext4_quota_off_umount() in this tag to release the enabled qoutas. Fixes: 11215630aada ("ext4: don't BUG on inconsistent journal feature") Cc: stable(a)kernel.org Signed-off-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20230327141630.156875-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Conflicts: fs/ext4/super.c Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/super.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 753a7f999184..4dc5776ae1dd 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5158,7 +5158,7 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ext4_msg(sb, KERN_INFO, "recovery complete"); err = ext4_mark_recovery_complete(sb, es); if (err) - goto failed_mount8; + goto failed_mount10; } if (EXT4_SB(sb)->s_journal) { if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) @@ -5203,7 +5203,9 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent) ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem"); goto failed_mount; -failed_mount8: +failed_mount10: + ext4_quota_off_umount(sb); +failed_mount8: __maybe_unused ext4_unregister_sysfs(sb); kobject_put(&sbi->s_kobj); failed_mount7: -- 2.31.1

2 1

[PATCH OLK-5.10 0/3] nbd: fix null-ptr-dereference while accessing 'nbd->config'
by Zhong Jinghua 01 Jul '23

01 Jul '23

nbd: fix null-ptr-dereference while accessing 'nbd->config' Yu Kuai (3): nbd: fold nbd config initialization into nbd_alloc_config() nbd: factor out a helper to get nbd_config without holding 'config_lock' nbd: fix null-ptr-dereference while accessing 'nbd->config' drivers/block/nbd.c | 82 +++++++++++++++++++++++++++++---------------- 1 file changed, 53 insertions(+), 29 deletions(-) -- 2.31.1

2 7

[PATCH OLK-5.10] media: dm1105: Fix use after free bug in dm1105_remove due to race condition
by 'Pu Lehui 30 Jun '23

30 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.180 commit e9d64e90a0ada4d00ac6562e351ef10ae7d9b911 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F1RG CVE: CVE-2023-35824 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ] In dm1105_probe, it called dm1105_ir_init and bound &dm1105->ir.work with dm1105_emit_key. When it handles IRQ request with dm1105_irq, it may call schedule_work to start the work. When we call dm1105_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in dm1105_remove CPU0 CPU1 |dm1105_emit_key dm1105_remove | dm1105_ir_exit | rc_unregister_device | rc_free_device | rc_dev_release | kfree(dev); | | | rc_keydown | //use Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> --- drivers/media/pci/dm1105/dm1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index 9dce31d2b525..d2e194a24e7e 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -1178,6 +1178,7 @@ static void dm1105_remove(struct pci_dev *pdev) struct dvb_demux *dvbdemux = &dev->demux; struct dmx_demux *dmx = &dvbdemux->dmx; + cancel_work_sync(&dev->ir.work); dm1105_ir_exit(dev); dmx->close(dmx); dvb_net_release(&dev->dvbnet); -- 2.25.1

2 1

[PATCH OLK-5.10] media: dm1105: Fix use after free bug in dm1105_remove due to race condition
by Pu Lehui 30 Jun '23

30 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.180 commit e9d64e90a0ada4d00ac6562e351ef10ae7d9b911 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F1RG CVE: CVE-2023-35824 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ] In dm1105_probe, it called dm1105_ir_init and bound &dm1105->ir.work with dm1105_emit_key. When it handles IRQ request with dm1105_irq, it may call schedule_work to start the work. When we call dm1105_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in dm1105_remove CPU0 CPU1 |dm1105_emit_key dm1105_remove | dm1105_ir_exit | rc_unregister_device | rc_free_device | rc_dev_release | kfree(dev); | | | rc_keydown | //use Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> --- drivers/media/pci/dm1105/dm1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index 9dce31d2b525..d2e194a24e7e 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -1178,6 +1178,7 @@ static void dm1105_remove(struct pci_dev *pdev) struct dvb_demux *dvbdemux = &dev->demux; struct dmx_demux *dmx = &dvbdemux->dmx; + cancel_work_sync(&dev->ir.work); dm1105_ir_exit(dev); dmx->close(dmx); dvb_net_release(&dev->dvbnet); -- 2.25.1

2 1

[PATCH OLK-5.10 0/6] Stop attempts to auxtrace mmap when not an auxtrace event
by Junhao He 30 Jun '23

30 Jun '23

The patches stop attempts to auxtrace mmap when it is not an auxtrace event e.g. when mmapping the CPUs on which only sideband is captured Adrian Hunter (6): libperf evlist: Remove ->idx() per_cpu parameter libperf evlist: Move ->idx() into mmap_per_evsel() libperf evlist: Add evsel as a parameter to ->idx() perf auxtrace: Record whether an auxtrace mmap is needed perf auxtrace: Add mmap_needed to auxtrace_mmap_params perf auxtrace: Remove auxtrace_mmap_params__set_idx() per_cpu parameter tools/lib/perf/evlist.c | 9 +++------ tools/lib/perf/include/internal/evlist.h | 3 ++- tools/perf/arch/arm/util/cs-etm.c | 1 + tools/perf/arch/arm64/util/arm-spe.c | 1 + tools/perf/arch/s390/util/auxtrace.c | 1 + tools/perf/arch/x86/util/intel-bts.c | 1 + tools/perf/arch/x86/util/intel-pt.c | 1 + tools/perf/util/auxtrace.c | 13 ++++++++++--- tools/perf/util/auxtrace.h | 14 ++++++++++---- tools/perf/util/evlist.c | 6 ++++-- tools/perf/util/evsel.h | 1 + tools/perf/util/mmap.c | 4 ++-- 12 files changed, 37 insertions(+), 18 deletions(-) -- 2.30.0

2 7

[PATCH openEuler-1.0-LTS] sched: Fix return value for init_affinity_domains
by Zhang Changzhong 30 Jun '23

30 Jun '23

From: Hui Tang <tanghui20(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7HFZV CVE: NA ---------------------------------------- alloc_fair_sched_group should not fail when sd NULL or dcount error. Fixes: 713cfd2684fa ("sched: Introduce smart grid scheduling strategy for cfs") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> Reviewed-by: Chen Hui <judy.chenhui(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- kernel/sched/fair.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 622d433..3c499b4 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5637,7 +5637,7 @@ static int init_affinity_domains(struct affinity_domain *ad) if (!sd || dcount > AD_LEVEL_MAX) { rcu_read_unlock(); - ret = -EINVAL; + ret = 0; goto err; } -- 2.9.5

2 1

[PATCH openEuler-1.0-LTS] sched: Fix null pointer derefrence for sd->span
by Zhang Changzhong 30 Jun '23

30 Jun '23

From: Hui Tang <tanghui20(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7HFZV CVE: NA ---------------------------------------- There may be NULL pointer derefrence when hotplug running and creating taskgroup concurrently. sched_autogroup_create_attach -> sched_create_group -> alloc_fair_sched_group -> init_auto_affinity -> init_affinity_domains -> cpumask_copy(xx, sched_domain_span(tmp)) { tmp may be free due rcu lock missing } { hotplug will rebuild sched domain } sched_cpu_activate -> build_sched_domains -> cpuset_cpu_active -> partition_sched_domains -> build_sched_domains -> cpu_attach_domain -> destroy_sched_domains -> call_rcu(&sd->rcu, destroy_sched_domains_rcu) So sd should be protect with rcu lock in entire critical zone. [ 599.811593] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 600.112821] pc : init_affinity_domains+0xf4/0x200 [ 600.125918] lr : init_affinity_domains+0xd4/0x200 [ 600.331355] Call trace: [ 600.338734] init_affinity_domains+0xf4/0x200 [ 600.347955] init_auto_affinity+0x78/0xc0 [ 600.356622] alloc_fair_sched_group+0xd8/0x210 [ 600.365594] sched_create_group+0x48/0xc0 [ 600.373970] sched_autogroup_create_attach+0x54/0x190 [ 600.383311] ksys_setsid+0x110/0x130 [ 600.391014] __arm64_sys_setsid+0x18/0x24 [ 600.399156] el0_svc_common+0x118/0x170 [ 600.406818] el0_svc_handler+0x3c/0x80 [ 600.414188] el0_svc+0x8/0x640 [ 600.420719] Code: b40002c0 9104e002 f9402061 a9401444 (a9001424) [ 600.430504] SMP: stopping secondary CPUs [ 600.441751] Starting crashdump kernel... Fixes: 713cfd2684fa ("sched: Introduce smart grid scheduling strategy for cfs") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- kernel/sched/fair.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e9eb00e..e9afb1e 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5582,7 +5582,7 @@ void free_affinity_domains(struct affinity_domain *ad) { int i; - for (i = 0; i < ad->dcount; i++) { + for (i = 0; i < AD_LEVEL_MAX; i++) { kfree(ad->domains[i]); kfree(ad->domains_orig[i]); ad->domains[i] = NULL; @@ -5621,6 +5621,12 @@ static int init_affinity_domains(struct affinity_domain *ad) int i = 0; int cpu; + for (i = 0; i < AD_LEVEL_MAX; i++) { + ad->domains[i] = kmalloc(sizeof(cpumask_t), GFP_KERNEL); + if (!ad->domains[i]) + goto err; + } + rcu_read_lock(); cpu = cpumask_first_and(cpu_active_mask, housekeeping_cpumask(HK_FLAG_DOMAIN)); @@ -5629,21 +5635,12 @@ static int init_affinity_domains(struct affinity_domain *ad) dcount++; } - if (!sd) { + if (!sd || dcount > AD_LEVEL_MAX) { rcu_read_unlock(); - return -EINVAL; - } - rcu_read_unlock(); - - for (i = 0; i < dcount; i++) { - ad->domains[i] = kmalloc(sizeof(cpumask_t), GFP_KERNEL); - if (!ad->domains[i]) { - ad->dcount = i; - goto err; - } + ret = -EINVAL; + goto err; } - rcu_read_lock(); idlest = sd_find_idlest_group(sd); cpu = group_find_idlest_cpu(idlest); i = 0; @@ -5688,6 +5685,8 @@ int init_auto_affinity(struct task_group *tg) ret = init_affinity_domains(&auto_affi->ad); if (ret) { kfree(auto_affi); + if (ret == -EINVAL) + ret = 0; return ret; } -- 2.9.5

1 0

[PATCH openEuler-1.0-LTS] sched: Fix null pointer derefrence for sd->span
by Zhang Changzhong 30 Jun '23

30 Jun '23

From: Hui Tang <tanghui20(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7HFZV CVE: NA ---------------------------------------- There may be NULL pointer derefrence when hotplug running and creating taskgroup concurrently. sched_autogroup_create_attach -> sched_create_group -> alloc_fair_sched_group -> init_auto_affinity -> init_affinity_domains -> cpumask_copy(xx, sched_domain_span(tmp)) { tmp may be free due rcu lock missing } { hotplug will rebuild sched domain } sched_cpu_activate -> build_sched_domains -> cpuset_cpu_active -> partition_sched_domains -> build_sched_domains -> cpu_attach_domain -> destroy_sched_domains -> call_rcu(&sd->rcu, destroy_sched_domains_rcu) So sd should be protect with rcu lock in entire critical zone. [ 599.811593] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 600.112821] pc : init_affinity_domains+0xf4/0x200 [ 600.125918] lr : init_affinity_domains+0xd4/0x200 [ 600.331355] Call trace: [ 600.338734] init_affinity_domains+0xf4/0x200 [ 600.347955] init_auto_affinity+0x78/0xc0 [ 600.356622] alloc_fair_sched_group+0xd8/0x210 [ 600.365594] sched_create_group+0x48/0xc0 [ 600.373970] sched_autogroup_create_attach+0x54/0x190 [ 600.383311] ksys_setsid+0x110/0x130 [ 600.391014] __arm64_sys_setsid+0x18/0x24 [ 600.399156] el0_svc_common+0x118/0x170 [ 600.406818] el0_svc_handler+0x3c/0x80 [ 600.414188] el0_svc+0x8/0x640 [ 600.420719] Code: b40002c0 9104e002 f9402061 a9401444 (a9001424) [ 600.430504] SMP: stopping secondary CPUs [ 600.441751] Starting crashdump kernel... Fixes: 713cfd2684fa ("sched: Introduce smart grid scheduling strategy for cfs") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- kernel/sched/fair.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e9eb00e..622d433 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5582,7 +5582,7 @@ void free_affinity_domains(struct affinity_domain *ad) { int i; - for (i = 0; i < ad->dcount; i++) { + for (i = 0; i < AD_LEVEL_MAX; i++) { kfree(ad->domains[i]); kfree(ad->domains_orig[i]); ad->domains[i] = NULL; @@ -5621,6 +5621,12 @@ static int init_affinity_domains(struct affinity_domain *ad) int i = 0; int cpu; + for (i = 0; i < AD_LEVEL_MAX; i++) { + ad->domains[i] = kmalloc(sizeof(cpumask_t), GFP_KERNEL); + if (!ad->domains[i]) + goto err; + } + rcu_read_lock(); cpu = cpumask_first_and(cpu_active_mask, housekeeping_cpumask(HK_FLAG_DOMAIN)); @@ -5629,21 +5635,12 @@ static int init_affinity_domains(struct affinity_domain *ad) dcount++; } - if (!sd) { + if (!sd || dcount > AD_LEVEL_MAX) { rcu_read_unlock(); - return -EINVAL; - } - rcu_read_unlock(); - - for (i = 0; i < dcount; i++) { - ad->domains[i] = kmalloc(sizeof(cpumask_t), GFP_KERNEL); - if (!ad->domains[i]) { - ad->dcount = i; - goto err; - } + ret = -EINVAL; + goto err; } - rcu_read_lock(); idlest = sd_find_idlest_group(sd); cpu = group_find_idlest_cpu(idlest); i = 0; -- 2.9.5

1 0

[PATCH v2 OLK-5.10 0/2] Add lz4k support for zram
by Tu Jinjiang 30 Jun '23

30 Jun '23

Tu Jinjiang (2): crypto: add lz4k Cryptographic API mm/zram: Add lz4k support for zram crypto/Kconfig | 8 + crypto/Makefile | 1 + crypto/lz4k.c | 100 ++++++ drivers/block/zram/zcomp.c | 3 + include/linux/lz4k.h | 384 +++++++++++++++++++++++ lib/Kconfig | 6 + lib/Makefile | 2 + lib/lz4k/Makefile | 2 + lib/lz4k/lz4k_decode.c | 314 +++++++++++++++++++ lib/lz4k/lz4k_encode.c | 554 +++++++++++++++++++++++++++++++++ lib/lz4k/lz4k_encode_private.h | 142 +++++++++ lib/lz4k/lz4k_private.h | 282 +++++++++++++++++ 12 files changed, 1798 insertions(+) create mode 100644 crypto/lz4k.c create mode 100644 include/linux/lz4k.h create mode 100644 lib/lz4k/Makefile create mode 100644 lib/lz4k/lz4k_decode.c create mode 100644 lib/lz4k/lz4k_encode.c create mode 100644 lib/lz4k/lz4k_encode_private.h create mode 100644 lib/lz4k/lz4k_private.h -- 2.25.1

2 3

Re: [PATCH OLK-5.10] mm/zram: add lz4k algorithm
by Tu Jinjiang 30 Jun '23

30 Jun '23

在 2023/6/30 10:39, Kefeng Wang 写道: > > 整体的代码风格都刷新下，按照linux的要求来吧 > > 正在修改。 > On 2023/6/30 10:41, Tu Jinjiang wrote: >> hulk inclusion >> category: feature >> bugzilla: https://gitee.com/openeuler/kernel/issues/I7H9IA >> CVE: NA >> >> ------------------------------------------- >> >> Add lz4k algorithm support for zram. > 有没有原始作者信息和commit信息，要保留我这边没有这些信息。 >> >> Signed-off-by: Nanyong Sun <sunnanyong(a)huawei.com> >> Signed-off-by: Tu Jinjiang <tujinjiang(a)huawei.com> >> --- >> crypto/Kconfig | 8 + >> crypto/Makefile | 1 + >> crypto/lz4k.c | 97 ++++++ >> drivers/block/zram/zcomp.c | 3 + >> include/linux/lz4k.h | 383 +++++++++++++++++++++++ >> lib/Kconfig | 6 + >> lib/Makefile | 2 + >> lib/lz4k/Makefile | 2 + >> lib/lz4k/lz4k_decode.c | 308 +++++++++++++++++++ >> lib/lz4k/lz4k_encode.c | 539 +++++++++++++++++++++++++++++++++ >> lib/lz4k/lz4k_encode_private.h | 137 +++++++++ >> lib/lz4k/lz4k_private.h | 269 ++++++++++++++++ >> 12 files changed, 1755 insertions(+) >> create mode 100644 crypto/lz4k.c >> create mode 100644 include/linux/lz4k.h >> create mode 100644 lib/lz4k/Makefile >> create mode 100644 lib/lz4k/lz4k_decode.c >> create mode 100644 lib/lz4k/lz4k_encode.c >> create mode 100644 lib/lz4k/lz4k_encode_private.h >> create mode 100644 lib/lz4k/lz4k_private.h >> >> diff --git a/crypto/Kconfig b/crypto/Kconfig >> index 64cb304f5103..35223cff7c8a 100644 >> --- a/crypto/Kconfig >> +++ b/crypto/Kconfig >> @@ -1871,6 +1871,14 @@ config CRYPTO_LZ4HC >> help >> This is the LZ4 high compression mode algorithm. >> +config CRYPTO_LZ4K >> + tristate "LZ4K compression algorithm" >> + select CRYPTO_ALGAPI >> + select LZ4K_COMPRESS >> + select LZ4K_DECOMPRESS >> + help >> + This is the LZ4K algorithm. >> + >> config CRYPTO_ZSTD >> tristate "Zstd compression algorithm" >> select CRYPTO_ALGAPI >> diff --git a/crypto/Makefile b/crypto/Makefile >> index 9d1191f2b741..5c3b0a0839c5 100644 >> --- a/crypto/Makefile >> +++ b/crypto/Makefile >> @@ -161,6 +161,7 @@ obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o >> authencesn.o >> obj-$(CONFIG_CRYPTO_LZO) += lzo.o lzo-rle.o >> obj-$(CONFIG_CRYPTO_LZ4) += lz4.o >> obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o >> +obj-$(CONFIG_CRYPTO_LZ4K) += lz4k.o >> obj-$(CONFIG_CRYPTO_XXHASH) += xxhash_generic.o >> obj-$(CONFIG_CRYPTO_842) += 842.o >> obj-$(CONFIG_CRYPTO_RNG2) += rng.o >> diff --git a/crypto/lz4k.c b/crypto/lz4k.c >> new file mode 100644 >> index 000000000000..8daceab269ef >> --- /dev/null >> +++ b/crypto/lz4k.c >> @@ -0,0 +1,97 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm for ZRAM >> + * Author: Arkhipov Denis arkhipov.denis(a)huawei.com >> + * Create: 2020-03-25 >> + */ >> + >> +#include <linux/init.h> >> +#include <linux/module.h> >> +#include <linux/crypto.h> >> +#include <linux/vmalloc.h> >> +#include <linux/lz4k.h> >> + >> + >> +struct lz4k_ctx { >> + void *lz4k_comp_mem; >> +}; >> + >> +static int lz4k_init(struct crypto_tfm *tfm) >> +{ >> + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); >> + >> + ctx->lz4k_comp_mem = vmalloc(lz4k_encode_state_bytes_min()); >> + if (!ctx->lz4k_comp_mem) >> + return -ENOMEM; >> + >> + return 0; >> +} >> + >> +static void lz4k_exit(struct crypto_tfm *tfm) >> +{ >> + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); >> + vfree(ctx->lz4k_comp_mem); >> +} >> + >> +static int lz4k_compress_crypto(struct crypto_tfm *tfm, const u8 >> *src, unsigned int slen, u8 *dst, unsigned int *dlen) >> +{ >> + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); >> + int ret; >> + >> + ret = lz4k_encode(ctx->lz4k_comp_mem, src, dst, slen, *dlen, 0); >> + > 去掉空行 >> + if (ret < 0) { >> + return -EINVAL; >> + } > 去掉括号 >> + >> + if (ret) >> + *dlen = ret; >> + >> + return 0; >> +} >> + >> +static int lz4k_decompress_crypto(struct crypto_tfm *tfm, const u8 >> *src, unsigned int slen, u8 *dst, unsigned int *dlen) >> +{ >> + int ret; >> + >> + ret = lz4k_decode(src, dst, slen, *dlen); >> + > 去空行 >> + if (ret <= 0) >> + return -EINVAL; > 加空行 >> + *dlen = ret; >> + return 0; >> +} >> + >> +static struct crypto_alg alg_lz4k = { >> + .cra_name = "lz4k", >> + .cra_driver_name = "lz4k-generic", >> + .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, >> + .cra_ctxsize = sizeof(struct lz4k_ctx), >> + .cra_module = THIS_MODULE, >> + .cra_list = LIST_HEAD_INIT(alg_lz4k.cra_list), >> + .cra_init = lz4k_init, >> + .cra_exit = lz4k_exit, >> + .cra_u = { >> + .compress = { >> + .coa_compress = lz4k_compress_crypto, >> + .coa_decompress = lz4k_decompress_crypto >> + } >> + } >> +}; >> + >> +static int __init lz4k_mod_init(void) >> +{ >> + return crypto_register_alg(&alg_lz4k); >> +} >> + >> +static void __exit lz4k_mod_fini(void) >> +{ >> + crypto_unregister_alg(&alg_lz4k); >> +} >> + >> +module_init(lz4k_mod_init); >> +module_exit(lz4k_mod_fini); >> + >> +MODULE_LICENSE("GPL"); >> +MODULE_DESCRIPTION("LZ4K Compression Algorithm"); >> +MODULE_ALIAS_CRYPTO("lz4k"); >> diff --git a/drivers/block/zram/zcomp.c b/drivers/block/zram/zcomp.c >> index b08650417bf0..28bda2035326 100644 >> --- a/drivers/block/zram/zcomp.c >> +++ b/drivers/block/zram/zcomp.c >> @@ -29,6 +29,9 @@ static const char * const backends[] = { >> #if IS_ENABLED(CONFIG_CRYPTO_ZSTD) >> "zstd", >> #endif >> +#if IS_ENABLED(CONFIG_CRYPTO_LZ4K) >> + "lz4k", >> +#endif >> }; >> static void zcomp_strm_free(struct zcomp_strm *zstrm) >> diff --git a/include/linux/lz4k.h b/include/linux/lz4k.h >> new file mode 100644 >> index 000000000000..6e73161b1840 >> --- /dev/null >> +++ b/include/linux/lz4k.h >> @@ -0,0 +1,383 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm >> + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com >> + * Created: 2020-03-25 >> + */ >> + >> +#ifndef _LZ4K_H >> +#define _LZ4K_H >> + >> +/* file lz4k.h >> + This file contains the platform-independent API of LZ-class >> + lossless codecs (compressors/decompressors) with complete >> + in-place documentation. The documentation is formatted >> + in accordance with DOXYGEN mark-up format. So, one can >> + generate proper documentation, e.g. in HTML format, using DOXYGEN. >> + >> + Currently, LZ-class codecs, documented here, implement following >> + algorithms for lossless data compression/decompression: >> + \li "LZ HUAWEI" proprietary codec competing with LZ4 - lz4k_encode(), >> + lz4k_encode_delta(), lz4k_decode(), lz4k_decode_delta() >> + >> + The LZ HUAWEI compressors accept any data as input and compress it >> + without loss to a smaller size if possible. >> + Compressed data produced by LZ HUAWEI compressor API lz4k_encode*(), >> + can be decompressed only by lz4k_decode() API documented below.\n >> + */ >> + >> +/* >> + lz4k_status defines simple set of status values returned by Huawei >> APIs >> + */ > > 各种Huawei 都改成 lz4k之类的算法本身不要保留 LZ HUAWEI之类的 > >> +typedef enum { >> + LZ4K_STATUS_INCOMPRESSIBLE = 0, /* !< Return when data is >> incompressible */ >> + LZ4K_STATUS_FAILED = -1, /* !< Return on general failure */ >> + LZ4K_STATUS_READ_ERROR = -2, /* !< Return when data reading >> failed */ >> + LZ4K_STATUS_WRITE_ERROR = -3 /* !< Return when data writing >> failed */ >> +} lz4k_status; >> + >> +/* >> + LZ4K_Version() returns static unmutable string with algorithm version >> + */ >> +const char *lz4k_version(void); >> + >> +/* >> + lz4k_encode_state_bytes_min() returns number of bytes for state >> parameter, >> + supplied to lz4k_encode(), lz4k_encode_delta(), >> + lz4k_update_delta_state(). >> + So, state should occupy at least lz4k_encode_state_bytes_min() for >> mentioned >> + functions to work correctly. >> + */ >> +unsigned lz4k_encode_state_bytes_min(void); > > 下面的注释风格之类要改下；或者删掉一些无用的 > >> + >> +/* >> + lz4k_encode() encodes/compresses one input buffer at *in, places >> + result of encoding into one output buffer at *out if encoded data >> + size fits specified values of out_max and out_limit. >> + It returs size of encoded data in case of success or value<=0 >> otherwise. >> + The result of successful encoding is in HUAWEI proprietary format, >> that >> + is the encoded data can be decoded only by lz4k_decode(). >> + >> + \return >> + \li positive value\n >> + if encoding was successful. The value returned is the size of >> encoded >> + (compressed) data always <=out_max. >> + \li non-positive value\n >> + if in==0||in_max==0||out==0||out_max==0 or >> + if out_max is less than needed for encoded (compressed) data. >> + \li 0 value\n >> + if encoded data size >= out_limit >> + >> + \param[in] state >> + !=0, pointer to state buffer used internally by the function. >> Size of >> + state in bytes should be at least >> lz4k_encode_state_bytes_min(). The content >> + of state buffer will be changed during encoding. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to encode (compress). The >> content of >> + the input buffer does not change during encoding. >> + >> + \param[in] out >> + !=0, pointer to the output buffer where to place result of encoding >> + (compression). >> + If encoding is unsuccessful, e.g. out_max or out_limit are less >> than >> + needed for encoded data then content of out buffer may be >> arbitrary. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at *in >> + >> + \param[in] out_max >> + !=0, size in bytes of the output buffer at *out >> + >> + \param[in] out_limit >> + encoded data size soft limit in bytes. Due to performance >> reasons it is >> + not guaranteed that >> + lz4k_encode will always detect that resulting encoded data size is >> + bigger than out_limit. >> + Hovewer, when reaching out_limit is detected, lz4k_encode() returns >> + earlier and spares CPU cycles. Caller code should recheck result >> + returned by lz4k_encode() (value greater than 0) if it is really >> + less or equal than out_limit. >> + out_limit is ignored if it is equal to 0. >> + */ >> +int lz4k_encode( >> + void *const state, >> + const void *const in, >> + void *out, >> + unsigned in_max, >> + unsigned out_max, >> + unsigned out_limit); >> + >> +/* >> + lz4k_encode_max_cr() encodes/compresses one input buffer at *in, >> places >> + result of encoding into one output buffer at *out if encoded data >> + size fits specified value of out_max. >> + It returs size of encoded data in case of success or value<=0 >> otherwise. >> + The result of successful encoding is in HUAWEI proprietary format, >> that >> + is the encoded data can be decoded only by lz4k_decode(). >> + >> + \return >> + \li positive value\n >> + if encoding was successful. The value returned is the size of >> encoded >> + (compressed) data always <=out_max. >> + \li non-positive value\n >> + if in==0||in_max==0||out==0||out_max==0 or >> + if out_max is less than needed for encoded (compressed) data. >> + >> + \param[in] state >> + !=0, pointer to state buffer used internally by the function. >> Size of >> + state in bytes should be at least >> lz4k_encode_state_bytes_min(). The content >> + of state buffer will be changed during encoding. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to encode (compress). The >> content of >> + the input buffer does not change during encoding. >> + >> + \param[in] out >> + !=0, pointer to the output buffer where to place result of encoding >> + (compression). >> + If encoding is unsuccessful, e.g. out_max is less than >> + needed for encoded data then content of out buffer may be >> arbitrary. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at *in >> + >> + \param[in] out_max >> + !=0, size in bytes of the output buffer at *out >> + >> + \param[in] out_limit >> + encoded data size soft limit in bytes. Due to performance >> reasons it is >> + not guaranteed that >> + lz4k_encode will always detect that resulting encoded data size is >> + bigger than out_limit. >> + Hovewer, when reaching out_limit is detected, lz4k_encode() returns >> + earlier and spares CPU cycles. Caller code should recheck result >> + returned by lz4k_encode() (value greater than 0) if it is really >> + less or equal than out_limit. >> + out_limit is ignored if it is equal to 0. >> + */ >> +int lz4k_encode_max_cr( >> + void *const state, >> + const void *const in, >> + void *out, >> + unsigned in_max, >> + unsigned out_max, >> + unsigned out_limit); >> + >> +/* >> + lz4k_update_delta_state() fills/updates state (hash table) in the >> same way as >> + lz4k_encode does while encoding (compressing). >> + The state and its content can then be used by lz4k_encode_delta() >> + to encode (compress) data more efficiently. >> + By other words, effect of lz4k_update_delta_state() is the same as >> + lz4k_encode() with all encoded output discarded. >> + >> + Example sequence of calls for lz4k_update_delta_state and >> + lz4k_encode_delta: >> + //dictionary (1st) block >> + int result0=lz4k_update_delta_state(state, in0, in0, in_max0); >> +//delta (2nd) block >> + int result1=lz4k_encode_delta(state, in0, in, out, in_max, >> + out_max); >> + >> + \param[in] state >> + !=0, pointer to state buffer used internally by lz4k_encode*. >> + Size of state in bytes should be at least >> lz4k_encode_state_bytes_min(). >> + The content of state buffer is zeroed at the beginning of >> + lz4k_update_delta_state ONLY when in0==in. >> + The content of state buffer will be changed inside >> + lz4k_update_delta_state. >> + >> + \param[in] in0 >> + !=0, pointer to the reference/dictionary input buffer that was used >> + as input to preceding call of lz4k_encode() or >> lz4k_update_delta_state() >> + to fill/update the state buffer. >> + The content of the reference/dictionary input buffer does not >> change >> + during encoding. >> + The in0 is needed for use-cases when there are several >> dictionary and >> + input blocks interleaved, e.g. >> + <dictionaryA><inputA><dictionaryB><inputB>..., or >> + <dictionaryA><dictionaryB><inputAB>..., etc. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to fill/update state as if >> encoding >> + (compressing) this input. This input buffer is also called >> dictionary >> + input buffer. >> + The content of the input buffer does not change during encoding. >> + The two buffers - at in0 and at in - should be contiguous in >> memory. >> + That is, the last byte of buffer at in0 is located exactly >> before byte >> + at in. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at in. >> + */ >> +int lz4k_update_delta_state( >> + void *const state, >> + const void *const in0, >> + const void *const in, >> + unsigned in_max); >> + >> +/* >> + lz4k_encode_delta() encodes (compresses) data from one input buffer >> + using one reference buffer as dictionary and places the result of >> + compression into one output buffer. >> + The result of successful compression is in HUAWEI proprietary >> format, so >> + that compressed data can be decompressed only by lz4k_decode_delta(). >> + Reference/dictionary buffer and input buffer should be contiguous in >> + memory. >> + >> + Example sequence of calls for lz4k_update_delta_state and >> + lz4k_encode_delta: >> +//dictionary (1st) block >> + int result0=lz4k_update_delta_state(state, in0, in0, in_max0); >> +//delta (2nd) block >> + int result1=lz4k_encode_delta(state, in0, in, out, in_max, >> + out_max); >> + >> + Example sequence of calls for lz4k_encode and lz4k_encode_delta: >> +//dictionary (1st) block >> + int result0=lz4k_encode(state, in0, out0, in_max0, out_max0); >> +//delta (2nd) block >> + int result1=lz4k_encode_delta(state, in0, in, out, in_max, >> + out_max); >> + >> + \return >> + \li positive value\n >> + if encoding was successful. The value returned is the size of >> encoded >> + (compressed) data. >> + \li non-positive value\n >> + if state==0||in0==0||in==0||in_max==0||out==0||out_max==0 or >> + if out_max is less than needed for encoded (compressed) data. >> + >> + \param[in] state >> + !=0, pointer to state buffer used internally by the function. >> Size of >> + state in bytes should be at least >> lz4k_encode_state_bytes_min(). For more >> + efficient encoding the state buffer may be filled/updated by >> calling >> + lz4k_update_delta_state() or lz4k_encode() before >> lz4k_encode_delta(). >> + The content of state buffer is zeroed at the beginning of >> + lz4k_encode_delta() ONLY when in0==in. >> + The content of state will be changed during encoding. >> + >> + \param[in] in0 >> + !=0, pointer to the reference/dictionary input buffer that was >> used as >> + input to preceding call of lz4k_encode() or >> lz4k_update_delta_state() to >> + fill/update the state buffer. >> + The content of the reference/dictionary input buffer does not >> change >> + during encoding. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to encode (compress). The >> input buffer >> + is compressed using content of the reference/dictionary input >> buffer at >> + in0. The content of the input buffer does not change during >> encoding. >> + The two buffers - at *in0 and at *in - should be contiguous in >> memory. >> + That is, the last byte of buffer at *in0 is located exactly >> before byte >> + at *in. >> + >> + \param[in] out >> + !=0, pointer to the output buffer where to place result of encoding >> + (compression). If compression is unsuccessful then content of out >> + buffer may be arbitrary. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at *in >> + >> + \param[in] out_max >> + !=0, size in bytes of the output buffer at *out. >> + */ >> +int lz4k_encode_delta( >> + void *const state, >> + const void *const in0, >> + const void *const in, >> + void *out, >> + unsigned in_max, >> + unsigned out_max); >> + >> +/* >> + lz4k_decode() decodes (decompresses) data from one input buffer >> and places >> + the result of decompression into one output buffer. The encoded >> data in input >> + buffer should be in HUAWEI proprietary format, produced by >> lz4k_encode() >> + or by lz4k_encode_delta(). >> + >> + \return >> + \li positive value\n >> + if decoding was successful. The value returned is the size of >> decoded >> + (decompressed) data. >> + \li non-positive value\n >> + if in==0||in_max==0||out==0||out_max==0 or >> + if out_max is less than needed for decoded (decompressed) data or >> + if input encoded data format is corrupted. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to decode (decompress). The >> content of >> + the input buffer does not change during decoding. >> + >> + \param[in] out >> + !=0, pointer to the output buffer where to place result of decoding >> + (decompression). If decompression is unsuccessful then content >> of out >> + buffer may be arbitrary. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at in >> + >> + \param[in] out_max >> + !=0, size in bytes of the output buffer at out >> + */ >> +int lz4k_decode( >> + const void *const in, >> + void *const out, >> + unsigned in_max, >> + unsigned out_max); >> + >> +/* >> + lz4k_decode_delta() decodes (decompresses) data from one input buffer >> + and places the result of decompression into one output buffer. The >> + compressed data in input buffer should be in format, produced by >> + lz4k_encode_delta(). >> + >> + Example sequence of calls for lz4k_decode and lz4k_decode_delta: >> +//dictionary (1st) block >> + int result0=lz4k_decode(in0, out0, in_max0, out_max0); >> +//delta (2nd) block >> + int result1=lz4k_decode_delta(in, out0, out, in_max, out_max); >> + >> + \return >> + \li positive value\n >> + if decoding was successful. The value returned is the size of >> decoded >> + (decompressed) data. >> + \li non-positive value\n >> + if in==0||in_max==0||out==0||out_max==0 or >> + if out_max is less than needed for decoded (decompressed) data or >> + if input data format is corrupted. >> + >> + \param[in] in >> + !=0, pointer to the input buffer to decode (decompress). The >> content of >> + the input buffer does not change during decoding. >> + >> + \param[in] out0 >> + !=0, pointer to the dictionary input buffer that was used as >> input to >> + lz4k_update_delta_state() to fill/update the state buffer. The >> content >> + of the dictionary input buffer does not change during decoding. >> + >> + \param[in] out >> + !=0, pointer to the output buffer where to place result of decoding >> + (decompression). If decompression is unsuccessful then content >> of out >> + buffer may be arbitrary. >> + The two buffers - at *out0 and at *out - should be contiguous in >> memory. >> + That is, the last byte of buffer at *out0 is located exactly >> before byte >> + at *out. >> + >> + \param[in] in_max >> + !=0, size in bytes of the input buffer at *in >> + >> + \param[in] out_max >> + !=0, size in bytes of the output buffer at *out >> + */ >> +int lz4k_decode_delta( >> + const void *in, >> + const void *const out0, >> + void *const out, >> + unsigned in_max, >> + unsigned out_max); >> + >> + >> +#endif /* _LZ4K_H */ >> diff --git a/lib/Kconfig b/lib/Kconfig >> index 36326864249d..4bf1c2c21157 100644 >> --- a/lib/Kconfig >> +++ b/lib/Kconfig >> @@ -310,6 +310,12 @@ config LZ4HC_COMPRESS >> config LZ4_DECOMPRESS >> tristate >> +config LZ4K_COMPRESS >> + tristate >> + >> +config LZ4K_DECOMPRESS >> + tristate >> + >> config ZSTD_COMPRESS >> select XXHASH >> tristate >> diff --git a/lib/Makefile b/lib/Makefile >> index a803e1527c4b..bd0d3635ae46 100644 >> --- a/lib/Makefile >> +++ b/lib/Makefile >> @@ -187,6 +187,8 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ >> obj-$(CONFIG_LZ4_COMPRESS) += lz4/ >> obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/ >> obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/ >> +obj-$(CONFIG_LZ4K_COMPRESS) += lz4k/ >> +obj-$(CONFIG_LZ4K_DECOMPRESS) += lz4k/ >> obj-$(CONFIG_ZSTD_COMPRESS) += zstd/ >> obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/ >> obj-$(CONFIG_XZ_DEC) += xz/ >> diff --git a/lib/lz4k/Makefile b/lib/lz4k/Makefile >> new file mode 100644 >> index 000000000000..6ea3578639d4 >> --- /dev/null >> +++ b/lib/lz4k/Makefile >> @@ -0,0 +1,2 @@ >> +obj-$(CONFIG_LZ4K_COMPRESS) += lz4k_encode.o >> +obj-$(CONFIG_LZ4K_DECOMPRESS) += lz4k_decode.o >> \ No newline at end of file >> diff --git a/lib/lz4k/lz4k_decode.c b/lib/lz4k/lz4k_decode.c >> new file mode 100644 >> index 000000000000..567b76b7bc51 >> --- /dev/null >> +++ b/lib/lz4k/lz4k_decode.c >> @@ -0,0 +1,308 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm >> + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com >> + * Created: 2020-03-25 >> + */ >> + >> +#if !defined(__KERNEL__) >> +#include "lz4k.h" >> +#else >> +#include <linux/lz4k.h> >> +#include <linux/module.h> >> +#endif >> + >> +#include "lz4k_private.h" /* types, etc */ >> + >> +static const uint8_t *get_size( >> + uint_fast32_t *size, >> + const uint8_t *in_at, >> + const uint8_t *const in_end) >> +{ >> + uint_fast32_t u; >> + do { >> + if (unlikely(in_at >= in_end)) >> + return NULL; >> + *size += (u = *(const uint8_t*)in_at); >> + ++in_at; >> + } while (BYTE_MAX == u); >> + return in_at; >> +} >> + >> +static int end_of_block( >> + const uint_fast32_t nr_bytes_max, >> + const uint_fast32_t r_bytes_max, >> + const uint8_t *const in_at, >> + const uint8_t *const in_end, >> + const uint8_t *const out, >> + const uint8_t *const out_at) >> +{ >> + if (!nr_bytes_max) >> + return LZ4K_STATUS_FAILED; /* should be the last one in >> block */ >> + if (r_bytes_max != REPEAT_MIN) >> + return LZ4K_STATUS_FAILED; /* should be the last one in >> block */ >> + if (in_at != in_end) >> + return LZ4K_STATUS_FAILED; /* should be the last one in >> block */ >> + return (int)(out_at - out); >> +} >> + >> +enum { >> + NR_COPY_MIN = 16, >> + R_COPY_MIN = 16, >> + R_COPY_SAFE = R_COPY_MIN - 1, >> + R_COPY_SAFE_2X = (R_COPY_MIN << 1) - 1 >> +}; >> + >> +static bool out_non_repeat( >> + const uint8_t **in_at, >> + uint8_t **out_at, >> + uint_fast32_t nr_bytes_max, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + const uint8_t *const in_copy_end = *in_at + nr_bytes_max; >> + uint8_t *const out_copy_end = *out_at + nr_bytes_max; >> + if (likely(nr_bytes_max <= NR_COPY_MIN)) { >> + if (likely(*in_at <= in_end - NR_COPY_MIN && >> + *out_at <= out_end - NR_COPY_MIN)) >> + m_copy(*out_at, *in_at, NR_COPY_MIN); >> + else if (in_copy_end <= in_end && out_copy_end <= out_end) >> + m_copy(*out_at, *in_at, nr_bytes_max); >> + else >> + return false; >> + } else { >> + if (likely(in_copy_end <= in_end - NR_COPY_MIN && >> + out_copy_end <= out_end - NR_COPY_MIN)) { >> + m_copy(*out_at, *in_at, NR_COPY_MIN); >> + copy_x_while_lt(*out_at + NR_COPY_MIN, >> + *in_at + NR_COPY_MIN, >> + out_copy_end, NR_COPY_MIN); >> + } else if (in_copy_end <= in_end && out_copy_end <= out_end) { >> + m_copy(*out_at, *in_at, nr_bytes_max); >> + } else { /* in_copy_end > in_end || out_copy_end > out_end */ >> + return false; >> + } >> + } >> + *in_at = in_copy_end; >> + *out_at = out_copy_end; >> + return true; >> +} >> + >> +static void out_repeat_overlap( >> + uint_fast32_t offset, >> + uint8_t *out_at, >> + const uint8_t *out_from, >> + const uint8_t *const out_copy_end) >> +{ /* (1 < offset < R_COPY_MIN/2) && out_copy_end + R_COPY_SAFE_2X >> <= out_end */ >> + enum { >> + COPY_MIN = R_COPY_MIN >> 1, >> + OFFSET_LIMIT = COPY_MIN >> 1 >> + }; >> + m_copy(out_at, out_from, COPY_MIN); >> + out_at += offset; >> + if (offset <= OFFSET_LIMIT) >> + offset <<= 1; >> + do { >> + m_copy(out_at, out_from, COPY_MIN); >> + out_at += offset; >> + if (offset <= OFFSET_LIMIT) >> + offset <<= 1; >> + } while (out_at - out_from < R_COPY_MIN); >> + while_lt_copy_2x_as_x2(out_at, out_from, out_copy_end, R_COPY_MIN); >> +} >> + >> +static bool out_repeat_slow( >> + uint_fast32_t r_bytes_max, >> + uint_fast32_t offset, >> + uint8_t *out_at, >> + const uint8_t *out_from, >> + const uint8_t *const out_copy_end, >> + const uint8_t *const out_end) >> +{ >> + if (offset > 1 && out_copy_end <= out_end - R_COPY_SAFE_2X) { >> + out_repeat_overlap(offset, out_at, out_from, out_copy_end); >> + } else { >> + if (unlikely(out_copy_end > out_end)) >> + return false; >> + if (offset == 1) { >> + m_set(out_at, *out_from, r_bytes_max); >> + } else { >> + do >> + *out_at++ = *out_from++; >> + while (out_at < out_copy_end); >> + } >> + } >> + return true; >> +} >> + >> +static int decode( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2) >> +{ >> + const uint_fast32_t r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); >> + const uint8_t *in_at = in; >> + const uint8_t *const in_end_minus_x = in_end - TAG_BYTES_MAX; >> + uint8_t *out_at = out; >> + while (likely(in_at <= in_end_minus_x)) { >> + const uint_fast32_t utag = read4_at(in_at - 1) >> BYTE_BITS; >> + const uint_fast32_t offset = utag & mask(off_log2); >> + uint_fast32_t nr_bytes_max = utag >> (off_log2 + r_log2), >> + r_bytes_max = ((utag >> off_log2) & mask(r_log2)) + >> + REPEAT_MIN; >> + const uint8_t *out_from = 0; >> + uint8_t *out_copy_end = 0; >> + in_at += TAG_BYTES_MAX; >> + if (unlikely(nr_bytes_max == mask(nr_log2))) { >> + in_at = get_size(&nr_bytes_max, in_at, in_end); >> + if (in_at == NULL) >> + return LZ4K_STATUS_READ_ERROR; >> + } >> + if (!out_non_repeat(&in_at, &out_at, nr_bytes_max, in_end, >> out_end)) >> + return LZ4K_STATUS_FAILED; >> + if (unlikely(r_bytes_max == mask(r_log2) + REPEAT_MIN)) { >> + in_at = get_size(&r_bytes_max, in_at, in_end); >> + if (in_at == NULL) >> + return LZ4K_STATUS_READ_ERROR; >> + } >> + out_from = out_at - offset; >> + if (unlikely(out_from < out0)) >> + return LZ4K_STATUS_FAILED; >> + out_copy_end = out_at + r_bytes_max; >> + if (likely(offset >= R_COPY_MIN && >> + out_copy_end <= out_end - R_COPY_SAFE_2X)) { >> + copy_2x_as_x2_while_lt(out_at, out_from, out_copy_end, >> + R_COPY_MIN); >> + } else if (likely(offset >= (R_COPY_MIN >> 1) && >> + out_copy_end <= out_end - R_COPY_SAFE_2X)) { >> + m_copy(out_at, out_from, R_COPY_MIN); >> + out_at += offset; >> + while_lt_copy_x(out_at, out_from, out_copy_end, >> R_COPY_MIN); >> + /* faster than 2x */ >> + } else if (likely(offset > 0)) { >> + if (!out_repeat_slow(r_bytes_max, offset, out_at, out_from, >> + out_copy_end, out_end)) >> + return LZ4K_STATUS_FAILED; >> + } else { /* offset == 0: EOB, last literal */ >> + return end_of_block(nr_bytes_max, r_bytes_max, in_at, >> + in_end, out, out_at); >> + } >> + out_at = out_copy_end; >> + } >> + return in_at == in_end ? (int)(out_at - out) : LZ4K_STATUS_FAILED; >> +} >> + >> +static int decode4kb( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + enum { >> + NR_LOG2 = 6 >> + }; >> + return decode(in, out0, out, in_end, out_end, NR_LOG2, >> BLOCK_4KB_LOG2); >> +} >> + >> +static int decode8kb( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + enum { >> + NR_LOG2 = 5 >> + }; >> + return decode(in, out0, out, in_end, out_end, NR_LOG2, >> BLOCK_8KB_LOG2); >> +} >> + >> +static int decode16kb( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + enum { >> + NR_LOG2 = 5 >> + }; >> + return decode(in, out0, out, in_end, out_end, NR_LOG2, >> BLOCK_16KB_LOG2); >> +} >> + >> +static int decode32kb( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + enum { >> + NR_LOG2 = 4 >> + }; >> + return decode(in, out0, out, in_end, out_end, NR_LOG2, >> BLOCK_32KB_LOG2); >> +} >> + >> +static int decode64kb( >> + const uint8_t *const in, >> + const uint8_t *const out0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + const uint8_t *const out_end) >> +{ >> + enum { >> + NR_LOG2 = 4 >> + }; >> + return decode(in, out0, out, in_end, out_end, NR_LOG2, >> BLOCK_64KB_LOG2); >> +} >> + >> +static inline const void *u8_inc(const uint8_t *a) >> +{ >> + return a+1; >> +} >> + >> +int lz4k_decode( >> + const void *in, >> + void *const out, >> + unsigned in_max, >> + unsigned out_max) >> +{ >> + /* ++use volatile pointers to prevent compiler optimizations */ >> + const uint8_t *volatile in_end = (const uint8_t*)in + in_max; >> + const uint8_t *volatile out_end = (uint8_t*)out + out_max; >> + uint8_t in_log2 = 0; >> + if (unlikely(in == NULL || out == NULL || in_max <= 4 || out_max >> <= 0)) >> + return LZ4K_STATUS_FAILED; >> + in_log2 = (uint8_t)(BLOCK_4KB_LOG2 + *(const uint8_t*)in); >> + /* invalid buffer size or pointer overflow */ >> + if (unlikely((const uint8_t*)in >= in_end || (uint8_t*)out >= >> out_end)) >> + return LZ4K_STATUS_FAILED; >> + /* -- */ >> + in = u8_inc((const uint8_t*)in); >> + --in_max; >> + if (in_log2 < BLOCK_8KB_LOG2) >> + return decode4kb((const uint8_t*)in, (uint8_t*)out, >> + (uint8_t*)out, in_end, out_end); >> + if (in_log2 == BLOCK_8KB_LOG2) >> + return decode8kb((const uint8_t*)in, (uint8_t*)out, >> + (uint8_t*)out, in_end, out_end); >> + if (in_log2 == BLOCK_16KB_LOG2) >> + return decode16kb((const uint8_t*)in, (uint8_t*)out, >> + (uint8_t*)out, in_end, out_end); >> + if (in_log2 == BLOCK_32KB_LOG2) >> + return decode32kb((const uint8_t*)in, (uint8_t*)out, >> + (uint8_t*)out, in_end, out_end); >> + if (in_log2 == BLOCK_64KB_LOG2) >> + return decode64kb((const uint8_t*)in, (uint8_t*)out, >> + (uint8_t*)out, in_end, out_end); >> + return LZ4K_STATUS_FAILED; >> +} >> +EXPORT_SYMBOL(lz4k_decode); >> + >> +MODULE_LICENSE("Dual BSD/GPL"); >> +MODULE_DESCRIPTION("LZ4K decoder"); >> diff --git a/lib/lz4k/lz4k_encode.c b/lib/lz4k/lz4k_encode.c >> new file mode 100644 >> index 000000000000..a425d3a0b827 >> --- /dev/null >> +++ b/lib/lz4k/lz4k_encode.c >> @@ -0,0 +1,539 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm >> + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com >> + * Created: 2020-03-25 >> + */ >> + >> +#if !defined(__KERNEL__) >> +#include "lz4k.h" >> +#else >> +#include <linux/lz4k.h> >> +#include <linux/module.h> >> +#endif >> + >> +#include "lz4k_private.h" >> +#include "lz4k_encode_private.h" >> + >> +static uint8_t *out_size_bytes(uint8_t *out_at, uint_fast32_t u) >> +{ >> + for (; unlikely(u >= BYTE_MAX); u -= BYTE_MAX) >> + *out_at++ = (uint8_t)BYTE_MAX; >> + *out_at++ = (uint8_t)u; >> + return out_at; >> +} >> + >> +static inline uint8_t *out_utag_then_bytes_left( >> + uint8_t *out_at, >> + uint_fast32_t utag, >> + uint_fast32_t bytes_left) >> +{ >> + m_copy(out_at, &utag, TAG_BYTES_MAX); >> + return out_size_bytes(out_at + TAG_BYTES_MAX, bytes_left); >> +} >> + >> +static int out_tail( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + const uint8_t *const out, >> + const uint8_t *const nr0, >> + const uint8_t *const in_end, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out) >> +{ >> + const uint_fast32_t nr_mask = mask(nr_log2); >> + const uint_fast32_t r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); >> + const uint_fast32_t nr_bytes_max = u_32(in_end - nr0); >> + if (encoded_bytes_min(nr_log2, nr_bytes_max) > u_32(out_end - >> out_at)) >> + return check_out ? LZ4K_STATUS_WRITE_ERROR : >> + LZ4K_STATUS_INCOMPRESSIBLE; >> + if (nr_bytes_max < nr_mask) { >> + /* caller guarantees at least one nr-byte */ >> + uint_fast32_t utag = (nr_bytes_max << (off_log2 + r_log2)); >> + m_copy(out_at, &utag, TAG_BYTES_MAX); >> + out_at += TAG_BYTES_MAX; >> + } else { >> + uint_fast32_t bytes_left = nr_bytes_max - nr_mask; >> + uint_fast32_t utag = (nr_mask << (off_log2 + r_log2)); >> + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); >> + } >> + m_copy(out_at, nr0, nr_bytes_max); >> + return (int)(out_at + nr_bytes_max - out); >> +} >> + >> +int lz4k_out_tail( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + const uint8_t *const out, >> + const uint8_t *const nr0, >> + const uint8_t *const in_end, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out) >> +{ >> + return out_tail(out_at, out_end, out, nr0, in_end, >> + nr_log2, off_log2, check_out); >> +} >> + >> +static uint8_t *out_non_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + const uint8_t *const nr0, >> + const uint8_t *const r, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out) >> +{ >> + const uint_fast32_t nr_bytes_max = u_32(r - nr0); >> + const uint_fast32_t nr_mask = mask(nr_log2), >> + r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); >> + if (likely(nr_bytes_max < nr_mask)) { >> + if (unlikely(check_out && >> + TAG_BYTES_MAX + nr_bytes_max > u_32(out_end - out_at))) >> + return NULL; >> + utag |= (nr_bytes_max << (off_log2 + r_log2)); >> + m_copy(out_at, &utag, TAG_BYTES_MAX); >> + out_at += TAG_BYTES_MAX; >> + } else { >> + uint_fast32_t bytes_left = nr_bytes_max - nr_mask; >> + if (unlikely(check_out && >> + TAG_BYTES_MAX + size_bytes_count(bytes_left) + >> nr_bytes_max > >> + u_32(out_end - out_at))) >> + return NULL; >> + utag |= (nr_mask << (off_log2 + r_log2)); >> + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); >> + } >> + if (unlikely(check_out)) >> + m_copy(out_at, nr0, nr_bytes_max); >> + else >> + copy_x_while_total(out_at, nr0, nr_bytes_max, NR_COPY_MIN); >> + out_at += nr_bytes_max; >> + return out_at; >> +} >> + >> +uint8_t *lz4k_out_non_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + const uint8_t *const nr0, >> + const uint8_t *const r, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out) >> +{ >> + return out_non_repeat(out_at, out_end, utag, nr0, r, >> + nr_log2, off_log2, check_out); >> +} >> + >> +static uint8_t *out_r_bytes_left( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out) /* =false when >> +out_max>=encoded_bytes_max(in_max), =true otherwise */ >> +{ >> + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + >> nr_log2)); >> + if (unlikely(r_bytes_max - REPEAT_MIN >= r_mask)) { >> + uint_fast32_t bytes_left = r_bytes_max - REPEAT_MIN - r_mask; >> + if (unlikely(check_out && >> + size_bytes_count(bytes_left) > u_32(out_end - out_at))) >> + return NULL; >> + out_at = out_size_bytes(out_at, bytes_left); >> + } >> + return out_at; /* SUCCESS: continue compression */ >> +} >> + >> +uint8_t *lz4k_out_r_bytes_left( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out) >> +{ >> + return out_r_bytes_left(out_at, out_end, r_bytes_max, >> + nr_log2, off_log2, check_out); >> +} >> + >> +static uint8_t *out_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out) /* =false when >> +out_max>=encoded_bytes_max(in_max), =true otherwise */ >> +{ >> + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + >> nr_log2)); >> + if (likely(r_bytes_max - REPEAT_MIN < r_mask)) { >> + if (unlikely(check_out && TAG_BYTES_MAX > u_32(out_end - >> out_at))) >> + return NULL; >> + utag |= ((r_bytes_max - REPEAT_MIN) << off_log2); >> + m_copy(out_at, &utag, TAG_BYTES_MAX); >> + out_at += TAG_BYTES_MAX; >> + } else { >> + uint_fast32_t bytes_left = r_bytes_max - REPEAT_MIN - r_mask; >> + if (unlikely(check_out && >> + TAG_BYTES_MAX + size_bytes_count(bytes_left) > >> + u_32(out_end - out_at))) >> + return NULL; >> + utag |= (r_mask << off_log2); >> + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); >> + } >> + return out_at; /* SUCCESS: continue compression */ >> +} >> + >> +uint8_t *lz4k_out_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out) >> +{ >> + return out_repeat(out_at, out_end, utag, r_bytes_max, >> + nr_log2, off_log2, check_out); >> +} >> + >> +static const uint8_t *repeat_end( >> + const uint8_t *q, >> + const uint8_t *r, >> + const uint8_t *const in_end_safe, >> + const uint8_t *const in_end) >> +{ >> + q += REPEAT_MIN; >> + r += REPEAT_MIN; >> + /* caller guarantees r+12<=in_end */ >> + do { >> + const uint64_t x = read8_at(q) ^ read8_at(r); >> + if (x) { >> + const uint16_t ctz = (uint16_t)__builtin_ctzl(x); >> + return r + (ctz >> BYTE_BITS_LOG2); >> + } >> + /* some bytes differ:+ count of trailing 0-bits/bytes */ >> + q += sizeof(uint64_t), r += sizeof(uint64_t); >> + } while (likely(r <= in_end_safe)); /* once, at input block end */ >> + do { >> + if (*q != *r) return r; >> + ++q; >> + ++r; >> + } while (r < in_end); >> + return r; >> +} >> + >> +const uint8_t *lz4k_repeat_end( >> + const uint8_t *q, >> + const uint8_t *r, >> + const uint8_t *const in_end_safe, >> + const uint8_t *const in_end) >> +{ >> + return repeat_end(q, r, in_end_safe, in_end); >> +} >> + >> +enum { >> + HT_BYTES_LOG2 = HT_LOG2 + 1 >> +}; >> + >> +inline unsigned encode_state_bytes_min(void) >> +{ >> + unsigned bytes_total = (1U << HT_BYTES_LOG2); >> + return bytes_total; >> +} >> + >> +#if !defined(LZ4K_DELTA) && !defined(LZ4K_MAX_CR) >> + >> +unsigned lz4k_encode_state_bytes_min(void) >> +{ >> + return encode_state_bytes_min(); >> +} >> +EXPORT_SYMBOL(lz4k_encode_state_bytes_min); >> + >> +#endif /* !defined(LZ4K_DELTA) && !defined(LZ4K_MAX_CR) */ >> + >> +/* CR increase order: +STEP, have OFFSETS, use _5b */ >> +/* *_6b to compete with LZ4 */ >> +static inline uint_fast32_t hash0_v(const uint64_t r, uint32_t shift) >> +{ >> + return hash64v_6b(r, shift); >> +} >> + >> +static inline uint_fast32_t hash0(const uint8_t *r, uint32_t shift) >> +{ >> + return hash64_6b(r, shift); >> +} >> + >> +/* >> + * Proof that 'r' increments are safe-NO pointer overflows are >> possible: >> + * >> + * While using STEP_LOG2=5, step_start=1<<STEP_LOG2 == 32 we >> increment s >> + * 32 times by 1, 32 times by 2, 32 times by 3, and so on: >> + * 32*1+32*2+32*3+...+32*31 == 32*SUM(1..31) == 32*((1+31)*15+16). >> + * So, we can safely increment s by at most 31 for input block size <= >> + * 1<<13 < 15872. >> + * >> + * More precisely, STEP_LIMIT == x for any input block calculated as >> follows: >> + * 1<<off_log2 >= (1<<STEP_LOG2)*((x+1)(x-1)/2+x/2) ==> >> + * 1<<(off_log2-STEP_LOG2+1) >= x^2+x-1 ==> >> + * x^2+x-1-1<<(off_log2-STEP_LOG2+1) == 0, which is solved by standard >> + * method. >> + * To avoid overhead here conservative approximate value of x is >> calculated >> + * as average of two nearest square roots, see STEP_LIMIT above. >> + */ >> + >> +enum { >> + STEP_LOG2 = 5 /* increase for better CR */ >> +}; >> + >> +static int encode_any( >> + uint16_t *const ht0, >> + const uint8_t *const in0, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + uint8_t *const out_end, /* ==out_limit for !check_out */ >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out) >> +{ /* caller guarantees off_log2 <=16 */ >> + uint8_t *out_at = out; >> + const uint8_t *const in_end_safe = in_end - NR_COPY_MIN; >> + const uint8_t *r = in0; >> + const uint8_t *nr0 = r++; >> + uint_fast32_t step = 1 << STEP_LOG2; >> + for (;;) { >> + uint_fast32_t utag = 0; >> + const uint8_t *r_end = 0; >> + uint_fast32_t r_bytes_max = 0; >> + const uint8_t *const q = hashed(in0, ht0, hash0(r, HT_LOG2), >> r); >> + if (!equal4(q, r)) { >> + r += (++step >> STEP_LOG2); >> + if (unlikely(r > in_end_safe)) >> + return out_tail(out_at, out_end, out, nr0, in_end, >> + nr_log2, off_log2, check_out); >> + continue; >> + } >> + utag = u_32(r - q); >> + r_end = repeat_end(q, r, in_end_safe, in_end); >> + r = repeat_start(q, r, nr0, in0); >> + r_bytes_max = u_32(r_end - r); >> + if (nr0 == r) { >> + out_at = out_repeat(out_at, out_end, utag, r_bytes_max, >> + nr_log2, off_log2, check_out); >> + } else { >> + update_utag(r_bytes_max, &utag, nr_log2, off_log2); >> + out_at = out_non_repeat(out_at, out_end, utag, nr0, r, >> + nr_log2, off_log2, check_out); >> + if (unlikely(check_out && out_at == NULL)) >> + return LZ4K_STATUS_WRITE_ERROR; >> + out_at = out_r_bytes_left(out_at, out_end, r_bytes_max, >> + nr_log2, off_log2, check_out); >> + } >> + if (unlikely(check_out && out_at == NULL)) >> + return LZ4K_STATUS_WRITE_ERROR; >> + nr0 = (r += r_bytes_max); >> + if (unlikely(r > in_end_safe)) >> + return r == in_end ? (int)(out_at - out) : >> + out_tail(out_at, out_end, out, r, in_end, >> + nr_log2, off_log2, check_out); >> + ht0[hash0(r - 1 - 1, HT_LOG2)] = (uint16_t)(r - 1 - 1 - in0); >> + step = 1 << STEP_LOG2; >> + } >> +} >> + >> +static int encode_fast( >> + uint16_t *const ht, >> + const uint8_t *const in, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + uint8_t *const out_end, /* ==out_limit for !check_out */ >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2) >> +{ /* caller guarantees off_log2 <=16 */ >> + return encode_any(ht, in, out, in_end, out_end, nr_log2, off_log2, >> + false); /* !check_out */ >> +} >> + >> +static int encode_slow( >> + uint16_t *const ht, >> + const uint8_t *const in, >> + uint8_t *const out, >> + const uint8_t *const in_end, >> + uint8_t *const out_end, /* ==out_limit for !check_out */ >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2) >> +{ /* caller guarantees off_log2 <=16 */ >> + return encode_any(ht, in, out, in_end, out_end, nr_log2, off_log2, >> + true); /* check_out */ >> +} >> + >> +static int encode4kb( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + const uint_fast32_t in_max, >> + const uint_fast32_t out_max, >> + const uint_fast32_t out_limit) >> +{ >> + enum { >> + NR_LOG2 = 6 >> + }; >> + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? >> + encode_slow(state, in, out, in + in_max, out + out_max, >> + NR_LOG2, BLOCK_4KB_LOG2) : >> + encode_fast(state, in, out, in + in_max, out + out_limit, >> + NR_LOG2, BLOCK_4KB_LOG2); >> + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ >> +} >> + >> +static int encode8kb( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + const uint_fast32_t in_max, >> + const uint_fast32_t out_max, >> + const uint_fast32_t out_limit) >> +{ >> + enum { >> + NR_LOG2 = 5 >> + }; >> + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? >> + encode_slow(state, in, out, in + in_max, out + out_max, >> + NR_LOG2, BLOCK_8KB_LOG2) : >> + encode_fast(state, in, out, in + in_max, out + out_limit, >> + NR_LOG2, BLOCK_8KB_LOG2); >> + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ >> +} >> + >> +static int encode16kb( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + const uint_fast32_t in_max, >> + const uint_fast32_t out_max, >> + const uint_fast32_t out_limit) >> +{ >> + enum { >> + NR_LOG2 = 5 >> + }; >> + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? >> + encode_slow(state, in, out, in + in_max, out + out_max, >> + NR_LOG2, BLOCK_16KB_LOG2) : >> + encode_fast(state, in, out, in + in_max, out + out_limit, >> + NR_LOG2, BLOCK_16KB_LOG2); >> + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ >> +} >> + >> +static int encode32kb( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + const uint_fast32_t in_max, >> + const uint_fast32_t out_max, >> + const uint_fast32_t out_limit) >> +{ >> + enum { >> + NR_LOG2 = 4 >> + }; >> + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? >> + encode_slow(state, in, out, in + in_max, out + out_max, >> + NR_LOG2, BLOCK_32KB_LOG2) : >> + encode_fast(state, in, out, in + in_max, out + out_limit, >> + NR_LOG2, BLOCK_32KB_LOG2); >> + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ >> +} >> + >> +static int encode64kb( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + const uint_fast32_t in_max, >> + const uint_fast32_t out_max, >> + const uint_fast32_t out_limit) >> +{ >> + enum { >> + NR_LOG2 = 4 >> + }; >> + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? >> + encode_slow(state, in, out, in + in_max, out + out_max, >> + NR_LOG2, BLOCK_64KB_LOG2) : >> + encode_fast(state, in, out, in + in_max, out + out_limit, >> + NR_LOG2, BLOCK_64KB_LOG2); >> + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ >> +} >> + >> +static int encode( >> + uint16_t *const state, >> + const uint8_t *const in, >> + uint8_t *out, >> + uint_fast32_t in_max, >> + uint_fast32_t out_max, >> + uint_fast32_t out_limit) >> +{ >> + const uint8_t in_log2 = (uint8_t)(most_significant_bit_of( >> + round_up_to_power_of2(in_max - REPEAT_MIN))); >> + m_set(state, 0, encode_state_bytes_min()); >> + *out = in_log2 > BLOCK_4KB_LOG2 ? (uint8_t)(in_log2 - >> BLOCK_4KB_LOG2) : 0; >> + ++out; >> + --out_max; >> + --out_limit; >> + if (in_log2 < BLOCK_8KB_LOG2) >> + return encode4kb(state, in, out, in_max, out_max, out_limit); >> + if (in_log2 == BLOCK_8KB_LOG2) >> + return encode8kb(state, in, out, in_max, out_max, out_limit); >> + if (in_log2 == BLOCK_16KB_LOG2) >> + return encode16kb(state, in, out, in_max, out_max, out_limit); >> + if (in_log2 == BLOCK_32KB_LOG2) >> + return encode32kb(state, in, out, in_max, out_max, out_limit); >> + if (in_log2 == BLOCK_64KB_LOG2) >> + return encode64kb(state, in, out, in_max, out_max, out_limit); >> + return LZ4K_STATUS_FAILED; >> +} >> + >> +int lz4k_encode( >> + void *const state, >> + const void *const in, >> + void *out, >> + unsigned in_max, >> + unsigned out_max, >> + unsigned out_limit) >> +{ >> + const unsigned gain_max = 64 > (in_max >> 6) ? 64 : (in_max >> 6); >> + const unsigned out_limit_min = in_max < out_max ? in_max : out_max; >> + const uint8_t *volatile in_end = (const uint8_t*)in + in_max; >> + const uint8_t *volatile out_end = (uint8_t*)out + out_max; >> + const void *volatile state_end = >> + (uint8_t*)state + encode_state_bytes_min(); >> + if (unlikely(state == NULL)) >> + return LZ4K_STATUS_FAILED; >> + if (unlikely(in == NULL || out == NULL)) >> + return LZ4K_STATUS_FAILED; >> + if (unlikely(in_max <= gain_max)) >> + return LZ4K_STATUS_INCOMPRESSIBLE; >> + if (unlikely(out_max <= gain_max)) /* need 1 byte for in_log2 */ >> + return LZ4K_STATUS_FAILED; >> + /* ++use volatile pointers to prevent compiler optimizations */ >> + if (unlikely((const uint8_t*)in >= in_end || (uint8_t*)out >= >> out_end)) >> + return LZ4K_STATUS_FAILED; >> + if (unlikely(state >= state_end)) >> + return LZ4K_STATUS_FAILED; /* pointer overflow */ >> + if (!out_limit || out_limit >= out_limit_min) >> + out_limit = out_limit_min - gain_max; >> + return encode((uint16_t*)state, (const uint8_t*)in, (uint8_t*)out, >> + in_max, out_max, out_limit); >> +} >> +EXPORT_SYMBOL(lz4k_encode); >> + >> +const char *lz4k_version(void) >> +{ >> + static const char *version = "2020.07.07"; >> + return version; >> +} >> +EXPORT_SYMBOL(lz4k_version); >> + >> +MODULE_LICENSE("Dual BSD/GPL"); >> +MODULE_DESCRIPTION("LZ4K encoder"); >> diff --git a/lib/lz4k/lz4k_encode_private.h >> b/lib/lz4k/lz4k_encode_private.h >> new file mode 100644 >> index 000000000000..eb5cd162468f >> --- /dev/null >> +++ b/lib/lz4k/lz4k_encode_private.h >> @@ -0,0 +1,137 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm >> + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com >> + * Created: 2020-03-25 >> + */ >> + >> +#ifndef _LZ4K_ENCODE_PRIVATE_H >> +#define _LZ4K_ENCODE_PRIVATE_H >> + >> +#include "lz4k_private.h" >> + >> +/* <nrSize bytes for whole block>+<1 terminating 0 byte> */ >> +static inline uint_fast32_t size_bytes_count(uint_fast32_t u) >> +{ >> + return (u + BYTE_MAX - 1) / BYTE_MAX; >> +} >> + >> +/* minimum encoded size for non-compressible data */ >> +static inline uint_fast32_t encoded_bytes_min( >> + uint_fast32_t nr_log2, >> + uint_fast32_t in_max) >> +{ >> + return in_max < mask(nr_log2) ? >> + TAG_BYTES_MAX + in_max : >> + TAG_BYTES_MAX + size_bytes_count(in_max - mask(nr_log2)) + >> in_max; >> +} >> + >> +enum { >> + NR_COPY_LOG2 = 4, >> + NR_COPY_MIN = 1 << NR_COPY_LOG2 >> +}; >> + >> +static inline uint_fast32_t u_32(int64_t i) >> +{ >> + return (uint_fast32_t)i; >> +} >> + >> +/* maximum encoded size for non-comprressible data if "fast" encoder >> is used */ >> +static inline uint_fast32_t encoded_bytes_max( >> + uint_fast32_t nr_log2, >> + uint_fast32_t in_max) >> +{ >> + uint_fast32_t r = TAG_BYTES_MAX + >> (uint32_t)round_up_to_log2(in_max, NR_COPY_LOG2); >> + return in_max < mask(nr_log2) ? r : r + size_bytes_count(in_max >> - mask(nr_log2)); >> +} >> + >> +enum { >> + HT_LOG2 = 12 >> +}; >> + >> +/* >> + * Compressed data format (where {} means 0 or more occurrences, [] >> means >> + * optional): >> + * <24bits tag: (off_log2 rOffset| r_log2 rSize|nr_log2 nrSize)> >> + * {<nrSize byte>}[<nr bytes>]{<rSize byte>} >> + * <rSize byte> and <nrSize byte> bytes are terminated by byte != 255 >> + * >> + */ >> + >> +static inline void update_utag( >> + uint_fast32_t r_bytes_max, >> + uint_fast32_t *utag, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2) >> +{ >> + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + >> nr_log2)); >> + *utag |= likely(r_bytes_max - REPEAT_MIN < r_mask) ? >> + ((r_bytes_max - REPEAT_MIN) << off_log2) : (r_mask << >> off_log2); >> +} >> + >> +static inline const uint8_t *hashed( >> + const uint8_t *const in0, >> + uint16_t *const ht, >> + uint_fast32_t h, >> + const uint8_t *r) >> +{ >> + const uint8_t *q = in0 + ht[h]; >> + ht[h] = (uint16_t)(r - in0); >> + return q; >> +} >> + >> +static inline const uint8_t *repeat_start( >> + const uint8_t *q, >> + const uint8_t *r, >> + const uint8_t *const nr0, >> + const uint8_t *const in0) >> +{ >> + for (; r > nr0 && likely(q > in0) && unlikely(q[-1] == r[-1]); >> --q, --r); >> + return r; >> +} >> + >> +int lz4k_out_tail( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + const uint8_t *const out, >> + const uint8_t *const nr0, >> + const uint8_t *const in_end, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out); >> + >> +uint8_t *lz4k_out_non_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + const uint8_t *const nr0, >> + const uint8_t *const r, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + bool check_out); >> + >> +uint8_t *lz4k_out_r_bytes_left( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out); >> + >> +uint8_t *lz4k_out_repeat( >> + uint8_t *out_at, >> + uint8_t *const out_end, >> + uint_fast32_t utag, >> + uint_fast32_t r_bytes_max, >> + const uint_fast32_t nr_log2, >> + const uint_fast32_t off_log2, >> + const bool check_out); >> + >> +const uint8_t *lz4k_repeat_end( >> + const uint8_t *q, >> + const uint8_t *r, >> + const uint8_t *const in_end_safe, >> + const uint8_t *const in_end); >> + >> +#endif /* _LZ4K_ENCODE_PRIVATE_H */ >> + >> diff --git a/lib/lz4k/lz4k_private.h b/lib/lz4k/lz4k_private.h >> new file mode 100644 >> index 000000000000..2a8f4b37dc74 >> --- /dev/null >> +++ b/lib/lz4k/lz4k_private.h >> @@ -0,0 +1,269 @@ >> +/* >> + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights >> reserved. >> + * Description: LZ4K compression algorithm >> + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com >> + * Created: 2020-03-25 >> + */ >> + >> +#ifndef _LZ4K_PRIVATE_H >> +#define _LZ4K_PRIVATE_H >> + >> +#if !defined(__KERNEL__) >> + >> +#include "lz4k.h" >> +#include <stdint.h> /* uint*_t */ >> +#define __STDC_WANT_LIB_EXT1__ 1 >> +#include <string.h> /* memcpy() */ >> + >> +#define likely(e) __builtin_expect(e, 1) >> +#define unlikely(e) __builtin_expect(e, 0) >> + >> +#else /* __KERNEL__ */ >> + >> +#include <linux/lz4k.h> >> +#define __STDC_WANT_LIB_EXT1__ 1 >> +#include <linux/string.h> /* memcpy() */ >> +#include <linux/types.h> /* uint8_t, int8_t, uint16_t, int16_t, >> +uint32_t, int32_t, uint64_t, int64_t */ >> +#include <stddef.h> >> + >> +typedef uint64_t uint_fast32_t; >> +typedef int64_t int_fast32_t; >> + >> +#endif /* __KERNEL__ */ >> + >> +#if defined(__GNUC__) && (__GNUC__>=4) >> +#define LZ4K_WITH_GCC_INTRINSICS >> +#endif >> + >> +#if !defined(__GNUC__) >> +#define __builtin_expect(e, v) (e) >> +#endif /* defined(__GNUC__) */ >> + >> +enum { >> + BYTE_BITS = 8, >> + BYTE_BITS_LOG2 = 3, >> + BYTE_MAX = 255U, >> + REPEAT_MIN = 4, >> + TAG_BYTES_MAX = 3, >> + TAG_BITS_MAX = TAG_BYTES_MAX * 8, >> + BLOCK_4KB_LOG2 = 12, >> + BLOCK_8KB_LOG2 = 13, >> + BLOCK_16KB_LOG2 = 14, >> + BLOCK_32KB_LOG2 = 15, >> + BLOCK_64KB_LOG2 = 16 >> +}; >> + >> +static inline uint32_t mask(uint_fast32_t log2) >> +{ >> + return (1U << log2) - 1U; >> +} >> + >> +static inline uint64_t mask64(uint_fast32_t log2) >> +{ >> + return (1ULL << log2) - 1ULL; >> +} >> + >> +#if defined LZ4K_WITH_GCC_INTRINSICS >> +static inline int most_significant_bit_of(uint64_t u) >> +{ >> + return (int)(__builtin_expect((u) == 0, false) ? >> + -1 : (int)(31 ^ (uint32_t)__builtin_clz((unsigned)(u)))); >> +} >> +#else /* #!defined LZ4K_WITH_GCC_INTRINSICS */ >> +#error undefined most_significant_bit_of(unsigned u) >> +#endif /* #if defined LZ4K_WITH_GCC_INTRINSICS */ >> + >> +static inline uint64_t round_up_to_log2(uint64_t u, uint8_t log2) >> +{ >> + return (uint64_t)((u + mask64(log2)) & ~mask64(log2)); >> +} >> + >> +static inline uint64_t round_up_to_power_of2(uint64_t u) >> +{ >> + const int_fast32_t msb = most_significant_bit_of(u); >> + return round_up_to_log2(u, (uint8_t)msb); >> +} >> + >> +static inline void m_copy(void *dst, const void *src, size_t total) >> +{ >> +#if defined(__STDC_LIB_EXT1__) >> + (void)memcpy_s(dst, total, src, (total * 2) >> 1); /* *2 >> 1 to >> avoid bot errors */ >> +#else >> + (void)__builtin_memcpy(dst, src, total); >> +#endif >> +} >> + >> +static inline void m_set(void *dst, uint8_t value, size_t total) >> +{ >> +#if defined(__STDC_LIB_EXT1__) >> + (void)memset_s(dst, total, value, (total * 2) >> 1); /* *2 >> 1 >> to avoid bot errors */ >> +#else >> + (void)__builtin_memset(dst, value, total); >> +#endif >> +} >> + >> +static inline uint32_t read4_at(const void *p) >> +{ >> + uint32_t result; >> + m_copy(&result, p, sizeof(result)); >> + return result; >> +} >> + >> +static inline uint64_t read8_at(const void *p) >> +{ >> + uint64_t result; >> + m_copy(&result, p, sizeof(result)); >> + return result; >> +} >> + >> +static inline bool equal4(const uint8_t *const q, const uint8_t >> *const r) >> +{ >> + return read4_at(q) == read4_at(r); >> +} >> + >> +static inline bool equal3(const uint8_t *const q, const uint8_t >> *const r) >> +{ >> + return (read4_at(q) << BYTE_BITS) == (read4_at(r) << BYTE_BITS); >> +} >> + >> +static inline uint_fast32_t hash24v(const uint64_t r, uint32_t shift) >> +{ >> + const uint32_t m = 3266489917U; >> + return (((uint32_t)r << BYTE_BITS) * m) >> (32 - shift); >> +} >> + >> +static inline uint_fast32_t hash24(const uint8_t *r, uint32_t shift) >> +{ >> + return hash24v(read4_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash32v_2(const uint64_t r, uint32_t shift) >> +{ >> + const uint32_t m = 3266489917U; >> + return ((uint32_t)r * m) >> (32 - shift); >> +} >> + >> +static inline uint_fast32_t hash32_2(const uint8_t *r, uint32_t shift) >> +{ >> + return hash32v_2(read4_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash32v(const uint64_t r, uint32_t shift) >> +{ >> + const uint32_t m = 2654435761U; >> + return ((uint32_t)r * m) >> (32 - shift); >> +} >> + >> +static inline uint_fast32_t hash32(const uint8_t *r, uint32_t shift) >> +{ >> + return hash32v(read4_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash64v_5b(const uint64_t r, uint32_t >> shift) >> +{ >> + const uint64_t m = 889523592379ULL; >> + return (uint32_t)(((r << 24) * m) >> (64 - shift)); >> +} >> + >> +static inline uint_fast32_t hash64_5b(const uint8_t *r, uint32_t shift) >> +{ >> + return hash64v_5b(read8_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash64v_6b(const uint64_t r, uint32_t >> shift) >> +{ >> + const uint64_t m = 227718039650203ULL; >> + return (uint32_t)(((r << 16) * m) >> (64 - shift)); >> +} >> + >> +static inline uint_fast32_t hash64_6b(const uint8_t *r, uint32_t shift) >> +{ >> + return hash64v_6b(read8_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash64v_7b(const uint64_t r, uint32_t >> shift) >> +{ >> + const uint64_t m = 58295818150454627ULL; >> + return (uint32_t)(((r << 8) * m) >> (64 - shift)); >> +} >> + >> +static inline uint_fast32_t hash64_7b(const uint8_t *r, uint32_t shift) >> +{ >> + return hash64v_7b(read8_at(r), shift); >> +} >> + >> +static inline uint_fast32_t hash64v_8b(const uint64_t r, uint32_t >> shift) >> +{ >> + const uint64_t m = 2870177450012600261ULL; >> + return (uint32_t)((r * m) >> (64 - shift)); >> +} >> + >> +static inline uint_fast32_t hash64_8b(const uint8_t *r, uint32_t shift) >> +{ >> + return hash64v_8b(read8_at(r), shift); >> +} >> + >> +static inline void while_lt_copy_x( >> + uint8_t *dst, >> + const uint8_t *src, >> + const uint8_t *dst_end, >> + const size_t copy_min) >> +{ >> + for (; dst < dst_end; dst += copy_min, src += copy_min) >> + m_copy(dst, src, copy_min); >> +} >> + >> +static inline void copy_x_while_lt( >> + uint8_t *dst, >> + const uint8_t *src, >> + const uint8_t *dst_end, >> + const size_t copy_min) >> +{ >> + m_copy(dst, src, copy_min); >> + while (dst + copy_min < dst_end) >> + m_copy(dst += copy_min, src += copy_min, copy_min); >> +} >> + >> +static inline void copy_x_while_total( >> + uint8_t *dst, >> + const uint8_t *src, >> + size_t total, >> + const size_t copy_min) >> +{ >> + m_copy(dst, src, copy_min); >> + for (; total > copy_min; total-= copy_min) >> + m_copy(dst += copy_min, src += copy_min, copy_min); >> +} >> + >> +static inline void copy_2x( >> + uint8_t *dst, >> + const uint8_t *src, >> + const size_t copy_min) >> +{ >> + m_copy(dst, src, copy_min); >> + m_copy(dst + copy_min, src + copy_min, copy_min); >> +} >> + >> +static inline void copy_2x_as_x2_while_lt( >> + uint8_t *dst, >> + const uint8_t *src, >> + const uint8_t *dst_end, >> + const size_t copy_min) >> +{ >> + copy_2x(dst, src, copy_min); >> + while (dst + (copy_min << 1) < dst_end) >> + copy_2x(dst += (copy_min << 1), src += (copy_min << 1), >> copy_min); >> +} >> + >> +static inline void while_lt_copy_2x_as_x2( >> + uint8_t *dst, >> + const uint8_t *src, >> + const uint8_t *dst_end, >> + const size_t copy_min) >> +{ >> + for (; dst < dst_end; dst += (copy_min << 1), src += (copy_min >> << 1)) >> + copy_2x(dst, src, copy_min); >> +} >> + >> +#endif /* _LZ4K_PRIVATE_H */

1 0

[PATCH OLK-5.10] mm/zram: add lz4k algorithm
by Tu Jinjiang 30 Jun '23

30 Jun '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7H9IA CVE: NA ------------------------------------------- Add lz4k algorithm support for zram. Signed-off-by: Nanyong Sun <sunnanyong(a)huawei.com> Signed-off-by: Tu Jinjiang <tujinjiang(a)huawei.com> --- crypto/Kconfig | 8 + crypto/Makefile | 1 + crypto/lz4k.c | 97 ++++++ drivers/block/zram/zcomp.c | 3 + include/linux/lz4k.h | 383 +++++++++++++++++++++++ lib/Kconfig | 6 + lib/Makefile | 2 + lib/lz4k/Makefile | 2 + lib/lz4k/lz4k_decode.c | 308 +++++++++++++++++++ lib/lz4k/lz4k_encode.c | 539 +++++++++++++++++++++++++++++++++ lib/lz4k/lz4k_encode_private.h | 137 +++++++++ lib/lz4k/lz4k_private.h | 269 ++++++++++++++++ 12 files changed, 1755 insertions(+) create mode 100644 crypto/lz4k.c create mode 100644 include/linux/lz4k.h create mode 100644 lib/lz4k/Makefile create mode 100644 lib/lz4k/lz4k_decode.c create mode 100644 lib/lz4k/lz4k_encode.c create mode 100644 lib/lz4k/lz4k_encode_private.h create mode 100644 lib/lz4k/lz4k_private.h diff --git a/crypto/Kconfig b/crypto/Kconfig index 64cb304f5103..35223cff7c8a 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -1871,6 +1871,14 @@ config CRYPTO_LZ4HC help This is the LZ4 high compression mode algorithm. +config CRYPTO_LZ4K + tristate "LZ4K compression algorithm" + select CRYPTO_ALGAPI + select LZ4K_COMPRESS + select LZ4K_DECOMPRESS + help + This is the LZ4K algorithm. + config CRYPTO_ZSTD tristate "Zstd compression algorithm" select CRYPTO_ALGAPI diff --git a/crypto/Makefile b/crypto/Makefile index 9d1191f2b741..5c3b0a0839c5 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -161,6 +161,7 @@ obj-$(CONFIG_CRYPTO_AUTHENC) += authenc.o authencesn.o obj-$(CONFIG_CRYPTO_LZO) += lzo.o lzo-rle.o obj-$(CONFIG_CRYPTO_LZ4) += lz4.o obj-$(CONFIG_CRYPTO_LZ4HC) += lz4hc.o +obj-$(CONFIG_CRYPTO_LZ4K) += lz4k.o obj-$(CONFIG_CRYPTO_XXHASH) += xxhash_generic.o obj-$(CONFIG_CRYPTO_842) += 842.o obj-$(CONFIG_CRYPTO_RNG2) += rng.o diff --git a/crypto/lz4k.c b/crypto/lz4k.c new file mode 100644 index 000000000000..8daceab269ef --- /dev/null +++ b/crypto/lz4k.c @@ -0,0 +1,97 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm for ZRAM + * Author: Arkhipov Denis arkhipov.denis(a)huawei.com + * Create: 2020-03-25 + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/crypto.h> +#include <linux/vmalloc.h> +#include <linux/lz4k.h> + + +struct lz4k_ctx { + void *lz4k_comp_mem; +}; + +static int lz4k_init(struct crypto_tfm *tfm) +{ + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); + + ctx->lz4k_comp_mem = vmalloc(lz4k_encode_state_bytes_min()); + if (!ctx->lz4k_comp_mem) + return -ENOMEM; + + return 0; +} + +static void lz4k_exit(struct crypto_tfm *tfm) +{ + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); + vfree(ctx->lz4k_comp_mem); +} + +static int lz4k_compress_crypto(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) +{ + struct lz4k_ctx *ctx = crypto_tfm_ctx(tfm); + int ret; + + ret = lz4k_encode(ctx->lz4k_comp_mem, src, dst, slen, *dlen, 0); + + if (ret < 0) { + return -EINVAL; + } + + if (ret) + *dlen = ret; + + return 0; +} + +static int lz4k_decompress_crypto(struct crypto_tfm *tfm, const u8 *src, unsigned int slen, u8 *dst, unsigned int *dlen) +{ + int ret; + + ret = lz4k_decode(src, dst, slen, *dlen); + + if (ret <= 0) + return -EINVAL; + *dlen = ret; + return 0; +} + +static struct crypto_alg alg_lz4k = { + .cra_name = "lz4k", + .cra_driver_name = "lz4k-generic", + .cra_flags = CRYPTO_ALG_TYPE_COMPRESS, + .cra_ctxsize = sizeof(struct lz4k_ctx), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(alg_lz4k.cra_list), + .cra_init = lz4k_init, + .cra_exit = lz4k_exit, + .cra_u = { + .compress = { + .coa_compress = lz4k_compress_crypto, + .coa_decompress = lz4k_decompress_crypto + } + } +}; + +static int __init lz4k_mod_init(void) +{ + return crypto_register_alg(&alg_lz4k); +} + +static void __exit lz4k_mod_fini(void) +{ + crypto_unregister_alg(&alg_lz4k); +} + +module_init(lz4k_mod_init); +module_exit(lz4k_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("LZ4K Compression Algorithm"); +MODULE_ALIAS_CRYPTO("lz4k"); diff --git a/drivers/block/zram/zcomp.c b/drivers/block/zram/zcomp.c index b08650417bf0..28bda2035326 100644 --- a/drivers/block/zram/zcomp.c +++ b/drivers/block/zram/zcomp.c @@ -29,6 +29,9 @@ static const char * const backends[] = { #if IS_ENABLED(CONFIG_CRYPTO_ZSTD) "zstd", #endif +#if IS_ENABLED(CONFIG_CRYPTO_LZ4K) + "lz4k", +#endif }; static void zcomp_strm_free(struct zcomp_strm *zstrm) diff --git a/include/linux/lz4k.h b/include/linux/lz4k.h new file mode 100644 index 000000000000..6e73161b1840 --- /dev/null +++ b/include/linux/lz4k.h @@ -0,0 +1,383 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com + * Created: 2020-03-25 + */ + +#ifndef _LZ4K_H +#define _LZ4K_H + +/* file lz4k.h + This file contains the platform-independent API of LZ-class + lossless codecs (compressors/decompressors) with complete + in-place documentation. The documentation is formatted + in accordance with DOXYGEN mark-up format. So, one can + generate proper documentation, e.g. in HTML format, using DOXYGEN. + + Currently, LZ-class codecs, documented here, implement following + algorithms for lossless data compression/decompression: + \li "LZ HUAWEI" proprietary codec competing with LZ4 - lz4k_encode(), + lz4k_encode_delta(), lz4k_decode(), lz4k_decode_delta() + + The LZ HUAWEI compressors accept any data as input and compress it + without loss to a smaller size if possible. + Compressed data produced by LZ HUAWEI compressor API lz4k_encode*(), + can be decompressed only by lz4k_decode() API documented below.\n + */ + +/* + lz4k_status defines simple set of status values returned by Huawei APIs + */ +typedef enum { + LZ4K_STATUS_INCOMPRESSIBLE = 0, /* !< Return when data is incompressible */ + LZ4K_STATUS_FAILED = -1, /* !< Return on general failure */ + LZ4K_STATUS_READ_ERROR = -2, /* !< Return when data reading failed */ + LZ4K_STATUS_WRITE_ERROR = -3 /* !< Return when data writing failed */ +} lz4k_status; + +/* + LZ4K_Version() returns static unmutable string with algorithm version + */ +const char *lz4k_version(void); + +/* + lz4k_encode_state_bytes_min() returns number of bytes for state parameter, + supplied to lz4k_encode(), lz4k_encode_delta(), + lz4k_update_delta_state(). + So, state should occupy at least lz4k_encode_state_bytes_min() for mentioned + functions to work correctly. + */ +unsigned lz4k_encode_state_bytes_min(void); + +/* + lz4k_encode() encodes/compresses one input buffer at *in, places + result of encoding into one output buffer at *out if encoded data + size fits specified values of out_max and out_limit. + It returs size of encoded data in case of success or value<=0 otherwise. + The result of successful encoding is in HUAWEI proprietary format, that + is the encoded data can be decoded only by lz4k_decode(). + + \return + \li positive value\n + if encoding was successful. The value returned is the size of encoded + (compressed) data always <=out_max. + \li non-positive value\n + if in==0||in_max==0||out==0||out_max==0 or + if out_max is less than needed for encoded (compressed) data. + \li 0 value\n + if encoded data size >= out_limit + + \param[in] state + !=0, pointer to state buffer used internally by the function. Size of + state in bytes should be at least lz4k_encode_state_bytes_min(). The content + of state buffer will be changed during encoding. + + \param[in] in + !=0, pointer to the input buffer to encode (compress). The content of + the input buffer does not change during encoding. + + \param[in] out + !=0, pointer to the output buffer where to place result of encoding + (compression). + If encoding is unsuccessful, e.g. out_max or out_limit are less than + needed for encoded data then content of out buffer may be arbitrary. + + \param[in] in_max + !=0, size in bytes of the input buffer at *in + + \param[in] out_max + !=0, size in bytes of the output buffer at *out + + \param[in] out_limit + encoded data size soft limit in bytes. Due to performance reasons it is + not guaranteed that + lz4k_encode will always detect that resulting encoded data size is + bigger than out_limit. + Hovewer, when reaching out_limit is detected, lz4k_encode() returns + earlier and spares CPU cycles. Caller code should recheck result + returned by lz4k_encode() (value greater than 0) if it is really + less or equal than out_limit. + out_limit is ignored if it is equal to 0. + */ +int lz4k_encode( + void *const state, + const void *const in, + void *out, + unsigned in_max, + unsigned out_max, + unsigned out_limit); + +/* + lz4k_encode_max_cr() encodes/compresses one input buffer at *in, places + result of encoding into one output buffer at *out if encoded data + size fits specified value of out_max. + It returs size of encoded data in case of success or value<=0 otherwise. + The result of successful encoding is in HUAWEI proprietary format, that + is the encoded data can be decoded only by lz4k_decode(). + + \return + \li positive value\n + if encoding was successful. The value returned is the size of encoded + (compressed) data always <=out_max. + \li non-positive value\n + if in==0||in_max==0||out==0||out_max==0 or + if out_max is less than needed for encoded (compressed) data. + + \param[in] state + !=0, pointer to state buffer used internally by the function. Size of + state in bytes should be at least lz4k_encode_state_bytes_min(). The content + of state buffer will be changed during encoding. + + \param[in] in + !=0, pointer to the input buffer to encode (compress). The content of + the input buffer does not change during encoding. + + \param[in] out + !=0, pointer to the output buffer where to place result of encoding + (compression). + If encoding is unsuccessful, e.g. out_max is less than + needed for encoded data then content of out buffer may be arbitrary. + + \param[in] in_max + !=0, size in bytes of the input buffer at *in + + \param[in] out_max + !=0, size in bytes of the output buffer at *out + + \param[in] out_limit + encoded data size soft limit in bytes. Due to performance reasons it is + not guaranteed that + lz4k_encode will always detect that resulting encoded data size is + bigger than out_limit. + Hovewer, when reaching out_limit is detected, lz4k_encode() returns + earlier and spares CPU cycles. Caller code should recheck result + returned by lz4k_encode() (value greater than 0) if it is really + less or equal than out_limit. + out_limit is ignored if it is equal to 0. + */ +int lz4k_encode_max_cr( + void *const state, + const void *const in, + void *out, + unsigned in_max, + unsigned out_max, + unsigned out_limit); + +/* + lz4k_update_delta_state() fills/updates state (hash table) in the same way as + lz4k_encode does while encoding (compressing). + The state and its content can then be used by lz4k_encode_delta() + to encode (compress) data more efficiently. + By other words, effect of lz4k_update_delta_state() is the same as + lz4k_encode() with all encoded output discarded. + + Example sequence of calls for lz4k_update_delta_state and + lz4k_encode_delta: + //dictionary (1st) block + int result0=lz4k_update_delta_state(state, in0, in0, in_max0); +//delta (2nd) block + int result1=lz4k_encode_delta(state, in0, in, out, in_max, + out_max); + + \param[in] state + !=0, pointer to state buffer used internally by lz4k_encode*. + Size of state in bytes should be at least lz4k_encode_state_bytes_min(). + The content of state buffer is zeroed at the beginning of + lz4k_update_delta_state ONLY when in0==in. + The content of state buffer will be changed inside + lz4k_update_delta_state. + + \param[in] in0 + !=0, pointer to the reference/dictionary input buffer that was used + as input to preceding call of lz4k_encode() or lz4k_update_delta_state() + to fill/update the state buffer. + The content of the reference/dictionary input buffer does not change + during encoding. + The in0 is needed for use-cases when there are several dictionary and + input blocks interleaved, e.g. + <dictionaryA><inputA><dictionaryB><inputB>..., or + <dictionaryA><dictionaryB><inputAB>..., etc. + + \param[in] in + !=0, pointer to the input buffer to fill/update state as if encoding + (compressing) this input. This input buffer is also called dictionary + input buffer. + The content of the input buffer does not change during encoding. + The two buffers - at in0 and at in - should be contiguous in memory. + That is, the last byte of buffer at in0 is located exactly before byte + at in. + + \param[in] in_max + !=0, size in bytes of the input buffer at in. + */ +int lz4k_update_delta_state( + void *const state, + const void *const in0, + const void *const in, + unsigned in_max); + +/* + lz4k_encode_delta() encodes (compresses) data from one input buffer + using one reference buffer as dictionary and places the result of + compression into one output buffer. + The result of successful compression is in HUAWEI proprietary format, so + that compressed data can be decompressed only by lz4k_decode_delta(). + Reference/dictionary buffer and input buffer should be contiguous in + memory. + + Example sequence of calls for lz4k_update_delta_state and + lz4k_encode_delta: +//dictionary (1st) block + int result0=lz4k_update_delta_state(state, in0, in0, in_max0); +//delta (2nd) block + int result1=lz4k_encode_delta(state, in0, in, out, in_max, + out_max); + + Example sequence of calls for lz4k_encode and lz4k_encode_delta: +//dictionary (1st) block + int result0=lz4k_encode(state, in0, out0, in_max0, out_max0); +//delta (2nd) block + int result1=lz4k_encode_delta(state, in0, in, out, in_max, + out_max); + + \return + \li positive value\n + if encoding was successful. The value returned is the size of encoded + (compressed) data. + \li non-positive value\n + if state==0||in0==0||in==0||in_max==0||out==0||out_max==0 or + if out_max is less than needed for encoded (compressed) data. + + \param[in] state + !=0, pointer to state buffer used internally by the function. Size of + state in bytes should be at least lz4k_encode_state_bytes_min(). For more + efficient encoding the state buffer may be filled/updated by calling + lz4k_update_delta_state() or lz4k_encode() before lz4k_encode_delta(). + The content of state buffer is zeroed at the beginning of + lz4k_encode_delta() ONLY when in0==in. + The content of state will be changed during encoding. + + \param[in] in0 + !=0, pointer to the reference/dictionary input buffer that was used as + input to preceding call of lz4k_encode() or lz4k_update_delta_state() to + fill/update the state buffer. + The content of the reference/dictionary input buffer does not change + during encoding. + + \param[in] in + !=0, pointer to the input buffer to encode (compress). The input buffer + is compressed using content of the reference/dictionary input buffer at + in0. The content of the input buffer does not change during encoding. + The two buffers - at *in0 and at *in - should be contiguous in memory. + That is, the last byte of buffer at *in0 is located exactly before byte + at *in. + + \param[in] out + !=0, pointer to the output buffer where to place result of encoding + (compression). If compression is unsuccessful then content of out + buffer may be arbitrary. + + \param[in] in_max + !=0, size in bytes of the input buffer at *in + + \param[in] out_max + !=0, size in bytes of the output buffer at *out. + */ +int lz4k_encode_delta( + void *const state, + const void *const in0, + const void *const in, + void *out, + unsigned in_max, + unsigned out_max); + +/* + lz4k_decode() decodes (decompresses) data from one input buffer and places + the result of decompression into one output buffer. The encoded data in input + buffer should be in HUAWEI proprietary format, produced by lz4k_encode() + or by lz4k_encode_delta(). + + \return + \li positive value\n + if decoding was successful. The value returned is the size of decoded + (decompressed) data. + \li non-positive value\n + if in==0||in_max==0||out==0||out_max==0 or + if out_max is less than needed for decoded (decompressed) data or + if input encoded data format is corrupted. + + \param[in] in + !=0, pointer to the input buffer to decode (decompress). The content of + the input buffer does not change during decoding. + + \param[in] out + !=0, pointer to the output buffer where to place result of decoding + (decompression). If decompression is unsuccessful then content of out + buffer may be arbitrary. + + \param[in] in_max + !=0, size in bytes of the input buffer at in + + \param[in] out_max + !=0, size in bytes of the output buffer at out + */ +int lz4k_decode( + const void *const in, + void *const out, + unsigned in_max, + unsigned out_max); + +/* + lz4k_decode_delta() decodes (decompresses) data from one input buffer + and places the result of decompression into one output buffer. The + compressed data in input buffer should be in format, produced by + lz4k_encode_delta(). + + Example sequence of calls for lz4k_decode and lz4k_decode_delta: +//dictionary (1st) block + int result0=lz4k_decode(in0, out0, in_max0, out_max0); +//delta (2nd) block + int result1=lz4k_decode_delta(in, out0, out, in_max, out_max); + + \return + \li positive value\n + if decoding was successful. The value returned is the size of decoded + (decompressed) data. + \li non-positive value\n + if in==0||in_max==0||out==0||out_max==0 or + if out_max is less than needed for decoded (decompressed) data or + if input data format is corrupted. + + \param[in] in + !=0, pointer to the input buffer to decode (decompress). The content of + the input buffer does not change during decoding. + + \param[in] out0 + !=0, pointer to the dictionary input buffer that was used as input to + lz4k_update_delta_state() to fill/update the state buffer. The content + of the dictionary input buffer does not change during decoding. + + \param[in] out + !=0, pointer to the output buffer where to place result of decoding + (decompression). If decompression is unsuccessful then content of out + buffer may be arbitrary. + The two buffers - at *out0 and at *out - should be contiguous in memory. + That is, the last byte of buffer at *out0 is located exactly before byte + at *out. + + \param[in] in_max + !=0, size in bytes of the input buffer at *in + + \param[in] out_max + !=0, size in bytes of the output buffer at *out + */ +int lz4k_decode_delta( + const void *in, + const void *const out0, + void *const out, + unsigned in_max, + unsigned out_max); + + +#endif /* _LZ4K_H */ diff --git a/lib/Kconfig b/lib/Kconfig index 36326864249d..4bf1c2c21157 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -310,6 +310,12 @@ config LZ4HC_COMPRESS config LZ4_DECOMPRESS tristate +config LZ4K_COMPRESS + tristate + +config LZ4K_DECOMPRESS + tristate + config ZSTD_COMPRESS select XXHASH tristate diff --git a/lib/Makefile b/lib/Makefile index a803e1527c4b..bd0d3635ae46 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -187,6 +187,8 @@ obj-$(CONFIG_LZO_DECOMPRESS) += lzo/ obj-$(CONFIG_LZ4_COMPRESS) += lz4/ obj-$(CONFIG_LZ4HC_COMPRESS) += lz4/ obj-$(CONFIG_LZ4_DECOMPRESS) += lz4/ +obj-$(CONFIG_LZ4K_COMPRESS) += lz4k/ +obj-$(CONFIG_LZ4K_DECOMPRESS) += lz4k/ obj-$(CONFIG_ZSTD_COMPRESS) += zstd/ obj-$(CONFIG_ZSTD_DECOMPRESS) += zstd/ obj-$(CONFIG_XZ_DEC) += xz/ diff --git a/lib/lz4k/Makefile b/lib/lz4k/Makefile new file mode 100644 index 000000000000..6ea3578639d4 --- /dev/null +++ b/lib/lz4k/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_LZ4K_COMPRESS) += lz4k_encode.o +obj-$(CONFIG_LZ4K_DECOMPRESS) += lz4k_decode.o \ No newline at end of file diff --git a/lib/lz4k/lz4k_decode.c b/lib/lz4k/lz4k_decode.c new file mode 100644 index 000000000000..567b76b7bc51 --- /dev/null +++ b/lib/lz4k/lz4k_decode.c @@ -0,0 +1,308 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com + * Created: 2020-03-25 + */ + +#if !defined(__KERNEL__) +#include "lz4k.h" +#else +#include <linux/lz4k.h> +#include <linux/module.h> +#endif + +#include "lz4k_private.h" /* types, etc */ + +static const uint8_t *get_size( + uint_fast32_t *size, + const uint8_t *in_at, + const uint8_t *const in_end) +{ + uint_fast32_t u; + do { + if (unlikely(in_at >= in_end)) + return NULL; + *size += (u = *(const uint8_t*)in_at); + ++in_at; + } while (BYTE_MAX == u); + return in_at; +} + +static int end_of_block( + const uint_fast32_t nr_bytes_max, + const uint_fast32_t r_bytes_max, + const uint8_t *const in_at, + const uint8_t *const in_end, + const uint8_t *const out, + const uint8_t *const out_at) +{ + if (!nr_bytes_max) + return LZ4K_STATUS_FAILED; /* should be the last one in block */ + if (r_bytes_max != REPEAT_MIN) + return LZ4K_STATUS_FAILED; /* should be the last one in block */ + if (in_at != in_end) + return LZ4K_STATUS_FAILED; /* should be the last one in block */ + return (int)(out_at - out); +} + +enum { + NR_COPY_MIN = 16, + R_COPY_MIN = 16, + R_COPY_SAFE = R_COPY_MIN - 1, + R_COPY_SAFE_2X = (R_COPY_MIN << 1) - 1 +}; + +static bool out_non_repeat( + const uint8_t **in_at, + uint8_t **out_at, + uint_fast32_t nr_bytes_max, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + const uint8_t *const in_copy_end = *in_at + nr_bytes_max; + uint8_t *const out_copy_end = *out_at + nr_bytes_max; + if (likely(nr_bytes_max <= NR_COPY_MIN)) { + if (likely(*in_at <= in_end - NR_COPY_MIN && + *out_at <= out_end - NR_COPY_MIN)) + m_copy(*out_at, *in_at, NR_COPY_MIN); + else if (in_copy_end <= in_end && out_copy_end <= out_end) + m_copy(*out_at, *in_at, nr_bytes_max); + else + return false; + } else { + if (likely(in_copy_end <= in_end - NR_COPY_MIN && + out_copy_end <= out_end - NR_COPY_MIN)) { + m_copy(*out_at, *in_at, NR_COPY_MIN); + copy_x_while_lt(*out_at + NR_COPY_MIN, + *in_at + NR_COPY_MIN, + out_copy_end, NR_COPY_MIN); + } else if (in_copy_end <= in_end && out_copy_end <= out_end) { + m_copy(*out_at, *in_at, nr_bytes_max); + } else { /* in_copy_end > in_end || out_copy_end > out_end */ + return false; + } + } + *in_at = in_copy_end; + *out_at = out_copy_end; + return true; +} + +static void out_repeat_overlap( + uint_fast32_t offset, + uint8_t *out_at, + const uint8_t *out_from, + const uint8_t *const out_copy_end) +{ /* (1 < offset < R_COPY_MIN/2) && out_copy_end + R_COPY_SAFE_2X <= out_end */ + enum { + COPY_MIN = R_COPY_MIN >> 1, + OFFSET_LIMIT = COPY_MIN >> 1 + }; + m_copy(out_at, out_from, COPY_MIN); + out_at += offset; + if (offset <= OFFSET_LIMIT) + offset <<= 1; + do { + m_copy(out_at, out_from, COPY_MIN); + out_at += offset; + if (offset <= OFFSET_LIMIT) + offset <<= 1; + } while (out_at - out_from < R_COPY_MIN); + while_lt_copy_2x_as_x2(out_at, out_from, out_copy_end, R_COPY_MIN); +} + +static bool out_repeat_slow( + uint_fast32_t r_bytes_max, + uint_fast32_t offset, + uint8_t *out_at, + const uint8_t *out_from, + const uint8_t *const out_copy_end, + const uint8_t *const out_end) +{ + if (offset > 1 && out_copy_end <= out_end - R_COPY_SAFE_2X) { + out_repeat_overlap(offset, out_at, out_from, out_copy_end); + } else { + if (unlikely(out_copy_end > out_end)) + return false; + if (offset == 1) { + m_set(out_at, *out_from, r_bytes_max); + } else { + do + *out_at++ = *out_from++; + while (out_at < out_copy_end); + } + } + return true; +} + +static int decode( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2) +{ + const uint_fast32_t r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); + const uint8_t *in_at = in; + const uint8_t *const in_end_minus_x = in_end - TAG_BYTES_MAX; + uint8_t *out_at = out; + while (likely(in_at <= in_end_minus_x)) { + const uint_fast32_t utag = read4_at(in_at - 1) >> BYTE_BITS; + const uint_fast32_t offset = utag & mask(off_log2); + uint_fast32_t nr_bytes_max = utag >> (off_log2 + r_log2), + r_bytes_max = ((utag >> off_log2) & mask(r_log2)) + + REPEAT_MIN; + const uint8_t *out_from = 0; + uint8_t *out_copy_end = 0; + in_at += TAG_BYTES_MAX; + if (unlikely(nr_bytes_max == mask(nr_log2))) { + in_at = get_size(&nr_bytes_max, in_at, in_end); + if (in_at == NULL) + return LZ4K_STATUS_READ_ERROR; + } + if (!out_non_repeat(&in_at, &out_at, nr_bytes_max, in_end, out_end)) + return LZ4K_STATUS_FAILED; + if (unlikely(r_bytes_max == mask(r_log2) + REPEAT_MIN)) { + in_at = get_size(&r_bytes_max, in_at, in_end); + if (in_at == NULL) + return LZ4K_STATUS_READ_ERROR; + } + out_from = out_at - offset; + if (unlikely(out_from < out0)) + return LZ4K_STATUS_FAILED; + out_copy_end = out_at + r_bytes_max; + if (likely(offset >= R_COPY_MIN && + out_copy_end <= out_end - R_COPY_SAFE_2X)) { + copy_2x_as_x2_while_lt(out_at, out_from, out_copy_end, + R_COPY_MIN); + } else if (likely(offset >= (R_COPY_MIN >> 1) && + out_copy_end <= out_end - R_COPY_SAFE_2X)) { + m_copy(out_at, out_from, R_COPY_MIN); + out_at += offset; + while_lt_copy_x(out_at, out_from, out_copy_end, R_COPY_MIN); + /* faster than 2x */ + } else if (likely(offset > 0)) { + if (!out_repeat_slow(r_bytes_max, offset, out_at, out_from, + out_copy_end, out_end)) + return LZ4K_STATUS_FAILED; + } else { /* offset == 0: EOB, last literal */ + return end_of_block(nr_bytes_max, r_bytes_max, in_at, + in_end, out, out_at); + } + out_at = out_copy_end; + } + return in_at == in_end ? (int)(out_at - out) : LZ4K_STATUS_FAILED; +} + +static int decode4kb( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + enum { + NR_LOG2 = 6 + }; + return decode(in, out0, out, in_end, out_end, NR_LOG2, BLOCK_4KB_LOG2); +} + +static int decode8kb( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + enum { + NR_LOG2 = 5 + }; + return decode(in, out0, out, in_end, out_end, NR_LOG2, BLOCK_8KB_LOG2); +} + +static int decode16kb( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + enum { + NR_LOG2 = 5 + }; + return decode(in, out0, out, in_end, out_end, NR_LOG2, BLOCK_16KB_LOG2); +} + +static int decode32kb( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + enum { + NR_LOG2 = 4 + }; + return decode(in, out0, out, in_end, out_end, NR_LOG2, BLOCK_32KB_LOG2); +} + +static int decode64kb( + const uint8_t *const in, + const uint8_t *const out0, + uint8_t *const out, + const uint8_t *const in_end, + const uint8_t *const out_end) +{ + enum { + NR_LOG2 = 4 + }; + return decode(in, out0, out, in_end, out_end, NR_LOG2, BLOCK_64KB_LOG2); +} + +static inline const void *u8_inc(const uint8_t *a) +{ + return a+1; +} + +int lz4k_decode( + const void *in, + void *const out, + unsigned in_max, + unsigned out_max) +{ + /* ++use volatile pointers to prevent compiler optimizations */ + const uint8_t *volatile in_end = (const uint8_t*)in + in_max; + const uint8_t *volatile out_end = (uint8_t*)out + out_max; + uint8_t in_log2 = 0; + if (unlikely(in == NULL || out == NULL || in_max <= 4 || out_max <= 0)) + return LZ4K_STATUS_FAILED; + in_log2 = (uint8_t)(BLOCK_4KB_LOG2 + *(const uint8_t*)in); + /* invalid buffer size or pointer overflow */ + if (unlikely((const uint8_t*)in >= in_end || (uint8_t*)out >= out_end)) + return LZ4K_STATUS_FAILED; + /* -- */ + in = u8_inc((const uint8_t*)in); + --in_max; + if (in_log2 < BLOCK_8KB_LOG2) + return decode4kb((const uint8_t*)in, (uint8_t*)out, + (uint8_t*)out, in_end, out_end); + if (in_log2 == BLOCK_8KB_LOG2) + return decode8kb((const uint8_t*)in, (uint8_t*)out, + (uint8_t*)out, in_end, out_end); + if (in_log2 == BLOCK_16KB_LOG2) + return decode16kb((const uint8_t*)in, (uint8_t*)out, + (uint8_t*)out, in_end, out_end); + if (in_log2 == BLOCK_32KB_LOG2) + return decode32kb((const uint8_t*)in, (uint8_t*)out, + (uint8_t*)out, in_end, out_end); + if (in_log2 == BLOCK_64KB_LOG2) + return decode64kb((const uint8_t*)in, (uint8_t*)out, + (uint8_t*)out, in_end, out_end); + return LZ4K_STATUS_FAILED; +} +EXPORT_SYMBOL(lz4k_decode); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("LZ4K decoder"); diff --git a/lib/lz4k/lz4k_encode.c b/lib/lz4k/lz4k_encode.c new file mode 100644 index 000000000000..a425d3a0b827 --- /dev/null +++ b/lib/lz4k/lz4k_encode.c @@ -0,0 +1,539 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com + * Created: 2020-03-25 + */ + +#if !defined(__KERNEL__) +#include "lz4k.h" +#else +#include <linux/lz4k.h> +#include <linux/module.h> +#endif + +#include "lz4k_private.h" +#include "lz4k_encode_private.h" + +static uint8_t *out_size_bytes(uint8_t *out_at, uint_fast32_t u) +{ + for (; unlikely(u >= BYTE_MAX); u -= BYTE_MAX) + *out_at++ = (uint8_t)BYTE_MAX; + *out_at++ = (uint8_t)u; + return out_at; +} + +static inline uint8_t *out_utag_then_bytes_left( + uint8_t *out_at, + uint_fast32_t utag, + uint_fast32_t bytes_left) +{ + m_copy(out_at, &utag, TAG_BYTES_MAX); + return out_size_bytes(out_at + TAG_BYTES_MAX, bytes_left); +} + +static int out_tail( + uint8_t *out_at, + uint8_t *const out_end, + const uint8_t *const out, + const uint8_t *const nr0, + const uint8_t *const in_end, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out) +{ + const uint_fast32_t nr_mask = mask(nr_log2); + const uint_fast32_t r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); + const uint_fast32_t nr_bytes_max = u_32(in_end - nr0); + if (encoded_bytes_min(nr_log2, nr_bytes_max) > u_32(out_end - out_at)) + return check_out ? LZ4K_STATUS_WRITE_ERROR : + LZ4K_STATUS_INCOMPRESSIBLE; + if (nr_bytes_max < nr_mask) { + /* caller guarantees at least one nr-byte */ + uint_fast32_t utag = (nr_bytes_max << (off_log2 + r_log2)); + m_copy(out_at, &utag, TAG_BYTES_MAX); + out_at += TAG_BYTES_MAX; + } else { + uint_fast32_t bytes_left = nr_bytes_max - nr_mask; + uint_fast32_t utag = (nr_mask << (off_log2 + r_log2)); + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); + } + m_copy(out_at, nr0, nr_bytes_max); + return (int)(out_at + nr_bytes_max - out); +} + +int lz4k_out_tail( + uint8_t *out_at, + uint8_t *const out_end, + const uint8_t *const out, + const uint8_t *const nr0, + const uint8_t *const in_end, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out) +{ + return out_tail(out_at, out_end, out, nr0, in_end, + nr_log2, off_log2, check_out); +} + +static uint8_t *out_non_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + const uint8_t *const nr0, + const uint8_t *const r, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out) +{ + const uint_fast32_t nr_bytes_max = u_32(r - nr0); + const uint_fast32_t nr_mask = mask(nr_log2), + r_log2 = TAG_BITS_MAX - (off_log2 + nr_log2); + if (likely(nr_bytes_max < nr_mask)) { + if (unlikely(check_out && + TAG_BYTES_MAX + nr_bytes_max > u_32(out_end - out_at))) + return NULL; + utag |= (nr_bytes_max << (off_log2 + r_log2)); + m_copy(out_at, &utag, TAG_BYTES_MAX); + out_at += TAG_BYTES_MAX; + } else { + uint_fast32_t bytes_left = nr_bytes_max - nr_mask; + if (unlikely(check_out && + TAG_BYTES_MAX + size_bytes_count(bytes_left) + nr_bytes_max > + u_32(out_end - out_at))) + return NULL; + utag |= (nr_mask << (off_log2 + r_log2)); + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); + } + if (unlikely(check_out)) + m_copy(out_at, nr0, nr_bytes_max); + else + copy_x_while_total(out_at, nr0, nr_bytes_max, NR_COPY_MIN); + out_at += nr_bytes_max; + return out_at; +} + +uint8_t *lz4k_out_non_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + const uint8_t *const nr0, + const uint8_t *const r, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out) +{ + return out_non_repeat(out_at, out_end, utag, nr0, r, + nr_log2, off_log2, check_out); +} + +static uint8_t *out_r_bytes_left( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out) /* =false when +out_max>=encoded_bytes_max(in_max), =true otherwise */ +{ + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + nr_log2)); + if (unlikely(r_bytes_max - REPEAT_MIN >= r_mask)) { + uint_fast32_t bytes_left = r_bytes_max - REPEAT_MIN - r_mask; + if (unlikely(check_out && + size_bytes_count(bytes_left) > u_32(out_end - out_at))) + return NULL; + out_at = out_size_bytes(out_at, bytes_left); + } + return out_at; /* SUCCESS: continue compression */ +} + +uint8_t *lz4k_out_r_bytes_left( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out) +{ + return out_r_bytes_left(out_at, out_end, r_bytes_max, + nr_log2, off_log2, check_out); +} + +static uint8_t *out_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out) /* =false when +out_max>=encoded_bytes_max(in_max), =true otherwise */ +{ + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + nr_log2)); + if (likely(r_bytes_max - REPEAT_MIN < r_mask)) { + if (unlikely(check_out && TAG_BYTES_MAX > u_32(out_end - out_at))) + return NULL; + utag |= ((r_bytes_max - REPEAT_MIN) << off_log2); + m_copy(out_at, &utag, TAG_BYTES_MAX); + out_at += TAG_BYTES_MAX; + } else { + uint_fast32_t bytes_left = r_bytes_max - REPEAT_MIN - r_mask; + if (unlikely(check_out && + TAG_BYTES_MAX + size_bytes_count(bytes_left) > + u_32(out_end - out_at))) + return NULL; + utag |= (r_mask << off_log2); + out_at = out_utag_then_bytes_left(out_at, utag, bytes_left); + } + return out_at; /* SUCCESS: continue compression */ +} + +uint8_t *lz4k_out_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out) +{ + return out_repeat(out_at, out_end, utag, r_bytes_max, + nr_log2, off_log2, check_out); +} + +static const uint8_t *repeat_end( + const uint8_t *q, + const uint8_t *r, + const uint8_t *const in_end_safe, + const uint8_t *const in_end) +{ + q += REPEAT_MIN; + r += REPEAT_MIN; + /* caller guarantees r+12<=in_end */ + do { + const uint64_t x = read8_at(q) ^ read8_at(r); + if (x) { + const uint16_t ctz = (uint16_t)__builtin_ctzl(x); + return r + (ctz >> BYTE_BITS_LOG2); + } + /* some bytes differ:+ count of trailing 0-bits/bytes */ + q += sizeof(uint64_t), r += sizeof(uint64_t); + } while (likely(r <= in_end_safe)); /* once, at input block end */ + do { + if (*q != *r) return r; + ++q; + ++r; + } while (r < in_end); + return r; +} + +const uint8_t *lz4k_repeat_end( + const uint8_t *q, + const uint8_t *r, + const uint8_t *const in_end_safe, + const uint8_t *const in_end) +{ + return repeat_end(q, r, in_end_safe, in_end); +} + +enum { + HT_BYTES_LOG2 = HT_LOG2 + 1 +}; + +inline unsigned encode_state_bytes_min(void) +{ + unsigned bytes_total = (1U << HT_BYTES_LOG2); + return bytes_total; +} + +#if !defined(LZ4K_DELTA) && !defined(LZ4K_MAX_CR) + +unsigned lz4k_encode_state_bytes_min(void) +{ + return encode_state_bytes_min(); +} +EXPORT_SYMBOL(lz4k_encode_state_bytes_min); + +#endif /* !defined(LZ4K_DELTA) && !defined(LZ4K_MAX_CR) */ + +/* CR increase order: +STEP, have OFFSETS, use _5b */ +/* *_6b to compete with LZ4 */ +static inline uint_fast32_t hash0_v(const uint64_t r, uint32_t shift) +{ + return hash64v_6b(r, shift); +} + +static inline uint_fast32_t hash0(const uint8_t *r, uint32_t shift) +{ + return hash64_6b(r, shift); +} + +/* + * Proof that 'r' increments are safe-NO pointer overflows are possible: + * + * While using STEP_LOG2=5, step_start=1<<STEP_LOG2 == 32 we increment s + * 32 times by 1, 32 times by 2, 32 times by 3, and so on: + * 32*1+32*2+32*3+...+32*31 == 32*SUM(1..31) == 32*((1+31)*15+16). + * So, we can safely increment s by at most 31 for input block size <= + * 1<<13 < 15872. + * + * More precisely, STEP_LIMIT == x for any input block calculated as follows: + * 1<<off_log2 >= (1<<STEP_LOG2)*((x+1)(x-1)/2+x/2) ==> + * 1<<(off_log2-STEP_LOG2+1) >= x^2+x-1 ==> + * x^2+x-1-1<<(off_log2-STEP_LOG2+1) == 0, which is solved by standard + * method. + * To avoid overhead here conservative approximate value of x is calculated + * as average of two nearest square roots, see STEP_LIMIT above. + */ + +enum { + STEP_LOG2 = 5 /* increase for better CR */ +}; + +static int encode_any( + uint16_t *const ht0, + const uint8_t *const in0, + uint8_t *const out, + const uint8_t *const in_end, + uint8_t *const out_end, /* ==out_limit for !check_out */ + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out) +{ /* caller guarantees off_log2 <=16 */ + uint8_t *out_at = out; + const uint8_t *const in_end_safe = in_end - NR_COPY_MIN; + const uint8_t *r = in0; + const uint8_t *nr0 = r++; + uint_fast32_t step = 1 << STEP_LOG2; + for (;;) { + uint_fast32_t utag = 0; + const uint8_t *r_end = 0; + uint_fast32_t r_bytes_max = 0; + const uint8_t *const q = hashed(in0, ht0, hash0(r, HT_LOG2), r); + if (!equal4(q, r)) { + r += (++step >> STEP_LOG2); + if (unlikely(r > in_end_safe)) + return out_tail(out_at, out_end, out, nr0, in_end, + nr_log2, off_log2, check_out); + continue; + } + utag = u_32(r - q); + r_end = repeat_end(q, r, in_end_safe, in_end); + r = repeat_start(q, r, nr0, in0); + r_bytes_max = u_32(r_end - r); + if (nr0 == r) { + out_at = out_repeat(out_at, out_end, utag, r_bytes_max, + nr_log2, off_log2, check_out); + } else { + update_utag(r_bytes_max, &utag, nr_log2, off_log2); + out_at = out_non_repeat(out_at, out_end, utag, nr0, r, + nr_log2, off_log2, check_out); + if (unlikely(check_out && out_at == NULL)) + return LZ4K_STATUS_WRITE_ERROR; + out_at = out_r_bytes_left(out_at, out_end, r_bytes_max, + nr_log2, off_log2, check_out); + } + if (unlikely(check_out && out_at == NULL)) + return LZ4K_STATUS_WRITE_ERROR; + nr0 = (r += r_bytes_max); + if (unlikely(r > in_end_safe)) + return r == in_end ? (int)(out_at - out) : + out_tail(out_at, out_end, out, r, in_end, + nr_log2, off_log2, check_out); + ht0[hash0(r - 1 - 1, HT_LOG2)] = (uint16_t)(r - 1 - 1 - in0); + step = 1 << STEP_LOG2; + } +} + +static int encode_fast( + uint16_t *const ht, + const uint8_t *const in, + uint8_t *const out, + const uint8_t *const in_end, + uint8_t *const out_end, /* ==out_limit for !check_out */ + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2) +{ /* caller guarantees off_log2 <=16 */ + return encode_any(ht, in, out, in_end, out_end, nr_log2, off_log2, + false); /* !check_out */ +} + +static int encode_slow( + uint16_t *const ht, + const uint8_t *const in, + uint8_t *const out, + const uint8_t *const in_end, + uint8_t *const out_end, /* ==out_limit for !check_out */ + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2) +{ /* caller guarantees off_log2 <=16 */ + return encode_any(ht, in, out, in_end, out_end, nr_log2, off_log2, + true); /* check_out */ +} + +static int encode4kb( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + const uint_fast32_t in_max, + const uint_fast32_t out_max, + const uint_fast32_t out_limit) +{ + enum { + NR_LOG2 = 6 + }; + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? + encode_slow(state, in, out, in + in_max, out + out_max, + NR_LOG2, BLOCK_4KB_LOG2) : + encode_fast(state, in, out, in + in_max, out + out_limit, + NR_LOG2, BLOCK_4KB_LOG2); + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ +} + +static int encode8kb( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + const uint_fast32_t in_max, + const uint_fast32_t out_max, + const uint_fast32_t out_limit) +{ + enum { + NR_LOG2 = 5 + }; + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? + encode_slow(state, in, out, in + in_max, out + out_max, + NR_LOG2, BLOCK_8KB_LOG2) : + encode_fast(state, in, out, in + in_max, out + out_limit, + NR_LOG2, BLOCK_8KB_LOG2); + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ +} + +static int encode16kb( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + const uint_fast32_t in_max, + const uint_fast32_t out_max, + const uint_fast32_t out_limit) +{ + enum { + NR_LOG2 = 5 + }; + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? + encode_slow(state, in, out, in + in_max, out + out_max, + NR_LOG2, BLOCK_16KB_LOG2) : + encode_fast(state, in, out, in + in_max, out + out_limit, + NR_LOG2, BLOCK_16KB_LOG2); + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ +} + +static int encode32kb( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + const uint_fast32_t in_max, + const uint_fast32_t out_max, + const uint_fast32_t out_limit) +{ + enum { + NR_LOG2 = 4 + }; + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? + encode_slow(state, in, out, in + in_max, out + out_max, + NR_LOG2, BLOCK_32KB_LOG2) : + encode_fast(state, in, out, in + in_max, out + out_limit, + NR_LOG2, BLOCK_32KB_LOG2); + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ +} + +static int encode64kb( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + const uint_fast32_t in_max, + const uint_fast32_t out_max, + const uint_fast32_t out_limit) +{ + enum { + NR_LOG2 = 4 + }; + const int result = (encoded_bytes_max(NR_LOG2, in_max) > out_max) ? + encode_slow(state, in, out, in + in_max, out + out_max, + NR_LOG2, BLOCK_64KB_LOG2) : + encode_fast(state, in, out, in + in_max, out + out_limit, + NR_LOG2, BLOCK_64KB_LOG2); + return result <= 0 ? result : result + 1; /* +1 for in_log2 */ +} + +static int encode( + uint16_t *const state, + const uint8_t *const in, + uint8_t *out, + uint_fast32_t in_max, + uint_fast32_t out_max, + uint_fast32_t out_limit) +{ + const uint8_t in_log2 = (uint8_t)(most_significant_bit_of( + round_up_to_power_of2(in_max - REPEAT_MIN))); + m_set(state, 0, encode_state_bytes_min()); + *out = in_log2 > BLOCK_4KB_LOG2 ? (uint8_t)(in_log2 - BLOCK_4KB_LOG2) : 0; + ++out; + --out_max; + --out_limit; + if (in_log2 < BLOCK_8KB_LOG2) + return encode4kb(state, in, out, in_max, out_max, out_limit); + if (in_log2 == BLOCK_8KB_LOG2) + return encode8kb(state, in, out, in_max, out_max, out_limit); + if (in_log2 == BLOCK_16KB_LOG2) + return encode16kb(state, in, out, in_max, out_max, out_limit); + if (in_log2 == BLOCK_32KB_LOG2) + return encode32kb(state, in, out, in_max, out_max, out_limit); + if (in_log2 == BLOCK_64KB_LOG2) + return encode64kb(state, in, out, in_max, out_max, out_limit); + return LZ4K_STATUS_FAILED; +} + +int lz4k_encode( + void *const state, + const void *const in, + void *out, + unsigned in_max, + unsigned out_max, + unsigned out_limit) +{ + const unsigned gain_max = 64 > (in_max >> 6) ? 64 : (in_max >> 6); + const unsigned out_limit_min = in_max < out_max ? in_max : out_max; + const uint8_t *volatile in_end = (const uint8_t*)in + in_max; + const uint8_t *volatile out_end = (uint8_t*)out + out_max; + const void *volatile state_end = + (uint8_t*)state + encode_state_bytes_min(); + if (unlikely(state == NULL)) + return LZ4K_STATUS_FAILED; + if (unlikely(in == NULL || out == NULL)) + return LZ4K_STATUS_FAILED; + if (unlikely(in_max <= gain_max)) + return LZ4K_STATUS_INCOMPRESSIBLE; + if (unlikely(out_max <= gain_max)) /* need 1 byte for in_log2 */ + return LZ4K_STATUS_FAILED; + /* ++use volatile pointers to prevent compiler optimizations */ + if (unlikely((const uint8_t*)in >= in_end || (uint8_t*)out >= out_end)) + return LZ4K_STATUS_FAILED; + if (unlikely(state >= state_end)) + return LZ4K_STATUS_FAILED; /* pointer overflow */ + if (!out_limit || out_limit >= out_limit_min) + out_limit = out_limit_min - gain_max; + return encode((uint16_t*)state, (const uint8_t*)in, (uint8_t*)out, + in_max, out_max, out_limit); +} +EXPORT_SYMBOL(lz4k_encode); + +const char *lz4k_version(void) +{ + static const char *version = "2020.07.07"; + return version; +} +EXPORT_SYMBOL(lz4k_version); + +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_DESCRIPTION("LZ4K encoder"); diff --git a/lib/lz4k/lz4k_encode_private.h b/lib/lz4k/lz4k_encode_private.h new file mode 100644 index 000000000000..eb5cd162468f --- /dev/null +++ b/lib/lz4k/lz4k_encode_private.h @@ -0,0 +1,137 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com + * Created: 2020-03-25 + */ + +#ifndef _LZ4K_ENCODE_PRIVATE_H +#define _LZ4K_ENCODE_PRIVATE_H + +#include "lz4k_private.h" + +/* <nrSize bytes for whole block>+<1 terminating 0 byte> */ +static inline uint_fast32_t size_bytes_count(uint_fast32_t u) +{ + return (u + BYTE_MAX - 1) / BYTE_MAX; +} + +/* minimum encoded size for non-compressible data */ +static inline uint_fast32_t encoded_bytes_min( + uint_fast32_t nr_log2, + uint_fast32_t in_max) +{ + return in_max < mask(nr_log2) ? + TAG_BYTES_MAX + in_max : + TAG_BYTES_MAX + size_bytes_count(in_max - mask(nr_log2)) + in_max; +} + +enum { + NR_COPY_LOG2 = 4, + NR_COPY_MIN = 1 << NR_COPY_LOG2 +}; + +static inline uint_fast32_t u_32(int64_t i) +{ + return (uint_fast32_t)i; +} + +/* maximum encoded size for non-comprressible data if "fast" encoder is used */ +static inline uint_fast32_t encoded_bytes_max( + uint_fast32_t nr_log2, + uint_fast32_t in_max) +{ + uint_fast32_t r = TAG_BYTES_MAX + (uint32_t)round_up_to_log2(in_max, NR_COPY_LOG2); + return in_max < mask(nr_log2) ? r : r + size_bytes_count(in_max - mask(nr_log2)); +} + +enum { + HT_LOG2 = 12 +}; + +/* + * Compressed data format (where {} means 0 or more occurrences, [] means + * optional): + * <24bits tag: (off_log2 rOffset| r_log2 rSize|nr_log2 nrSize)> + * {<nrSize byte>}[<nr bytes>]{<rSize byte>} + * <rSize byte> and <nrSize byte> bytes are terminated by byte != 255 + * + */ + +static inline void update_utag( + uint_fast32_t r_bytes_max, + uint_fast32_t *utag, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2) +{ + const uint_fast32_t r_mask = mask(TAG_BITS_MAX - (off_log2 + nr_log2)); + *utag |= likely(r_bytes_max - REPEAT_MIN < r_mask) ? + ((r_bytes_max - REPEAT_MIN) << off_log2) : (r_mask << off_log2); +} + +static inline const uint8_t *hashed( + const uint8_t *const in0, + uint16_t *const ht, + uint_fast32_t h, + const uint8_t *r) +{ + const uint8_t *q = in0 + ht[h]; + ht[h] = (uint16_t)(r - in0); + return q; +} + +static inline const uint8_t *repeat_start( + const uint8_t *q, + const uint8_t *r, + const uint8_t *const nr0, + const uint8_t *const in0) +{ + for (; r > nr0 && likely(q > in0) && unlikely(q[-1] == r[-1]); --q, --r); + return r; +} + +int lz4k_out_tail( + uint8_t *out_at, + uint8_t *const out_end, + const uint8_t *const out, + const uint8_t *const nr0, + const uint8_t *const in_end, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out); + +uint8_t *lz4k_out_non_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + const uint8_t *const nr0, + const uint8_t *const r, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + bool check_out); + +uint8_t *lz4k_out_r_bytes_left( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out); + +uint8_t *lz4k_out_repeat( + uint8_t *out_at, + uint8_t *const out_end, + uint_fast32_t utag, + uint_fast32_t r_bytes_max, + const uint_fast32_t nr_log2, + const uint_fast32_t off_log2, + const bool check_out); + +const uint8_t *lz4k_repeat_end( + const uint8_t *q, + const uint8_t *r, + const uint8_t *const in_end_safe, + const uint8_t *const in_end); + +#endif /* _LZ4K_ENCODE_PRIVATE_H */ + diff --git a/lib/lz4k/lz4k_private.h b/lib/lz4k/lz4k_private.h new file mode 100644 index 000000000000..2a8f4b37dc74 --- /dev/null +++ b/lib/lz4k/lz4k_private.h @@ -0,0 +1,269 @@ +/* + * Copyright (c) Huawei Technologies Co., Ltd. 2012-2020. All rights reserved. + * Description: LZ4K compression algorithm + * Author: Aleksei Romanovskii aleksei.romanovskii(a)huawei.com + * Created: 2020-03-25 + */ + +#ifndef _LZ4K_PRIVATE_H +#define _LZ4K_PRIVATE_H + +#if !defined(__KERNEL__) + +#include "lz4k.h" +#include <stdint.h> /* uint*_t */ +#define __STDC_WANT_LIB_EXT1__ 1 +#include <string.h> /* memcpy() */ + +#define likely(e) __builtin_expect(e, 1) +#define unlikely(e) __builtin_expect(e, 0) + +#else /* __KERNEL__ */ + +#include <linux/lz4k.h> +#define __STDC_WANT_LIB_EXT1__ 1 +#include <linux/string.h> /* memcpy() */ +#include <linux/types.h> /* uint8_t, int8_t, uint16_t, int16_t, +uint32_t, int32_t, uint64_t, int64_t */ +#include <stddef.h> + +typedef uint64_t uint_fast32_t; +typedef int64_t int_fast32_t; + +#endif /* __KERNEL__ */ + +#if defined(__GNUC__) && (__GNUC__>=4) +#define LZ4K_WITH_GCC_INTRINSICS +#endif + +#if !defined(__GNUC__) +#define __builtin_expect(e, v) (e) +#endif /* defined(__GNUC__) */ + +enum { + BYTE_BITS = 8, + BYTE_BITS_LOG2 = 3, + BYTE_MAX = 255U, + REPEAT_MIN = 4, + TAG_BYTES_MAX = 3, + TAG_BITS_MAX = TAG_BYTES_MAX * 8, + BLOCK_4KB_LOG2 = 12, + BLOCK_8KB_LOG2 = 13, + BLOCK_16KB_LOG2 = 14, + BLOCK_32KB_LOG2 = 15, + BLOCK_64KB_LOG2 = 16 +}; + +static inline uint32_t mask(uint_fast32_t log2) +{ + return (1U << log2) - 1U; +} + +static inline uint64_t mask64(uint_fast32_t log2) +{ + return (1ULL << log2) - 1ULL; +} + +#if defined LZ4K_WITH_GCC_INTRINSICS +static inline int most_significant_bit_of(uint64_t u) +{ + return (int)(__builtin_expect((u) == 0, false) ? + -1 : (int)(31 ^ (uint32_t)__builtin_clz((unsigned)(u)))); +} +#else /* #!defined LZ4K_WITH_GCC_INTRINSICS */ +#error undefined most_significant_bit_of(unsigned u) +#endif /* #if defined LZ4K_WITH_GCC_INTRINSICS */ + +static inline uint64_t round_up_to_log2(uint64_t u, uint8_t log2) +{ + return (uint64_t)((u + mask64(log2)) & ~mask64(log2)); +} + +static inline uint64_t round_up_to_power_of2(uint64_t u) +{ + const int_fast32_t msb = most_significant_bit_of(u); + return round_up_to_log2(u, (uint8_t)msb); +} + +static inline void m_copy(void *dst, const void *src, size_t total) +{ +#if defined(__STDC_LIB_EXT1__) + (void)memcpy_s(dst, total, src, (total * 2) >> 1); /* *2 >> 1 to avoid bot errors */ +#else + (void)__builtin_memcpy(dst, src, total); +#endif +} + +static inline void m_set(void *dst, uint8_t value, size_t total) +{ +#if defined(__STDC_LIB_EXT1__) + (void)memset_s(dst, total, value, (total * 2) >> 1); /* *2 >> 1 to avoid bot errors */ +#else + (void)__builtin_memset(dst, value, total); +#endif +} + +static inline uint32_t read4_at(const void *p) +{ + uint32_t result; + m_copy(&result, p, sizeof(result)); + return result; +} + +static inline uint64_t read8_at(const void *p) +{ + uint64_t result; + m_copy(&result, p, sizeof(result)); + return result; +} + +static inline bool equal4(const uint8_t *const q, const uint8_t *const r) +{ + return read4_at(q) == read4_at(r); +} + +static inline bool equal3(const uint8_t *const q, const uint8_t *const r) +{ + return (read4_at(q) << BYTE_BITS) == (read4_at(r) << BYTE_BITS); +} + +static inline uint_fast32_t hash24v(const uint64_t r, uint32_t shift) +{ + const uint32_t m = 3266489917U; + return (((uint32_t)r << BYTE_BITS) * m) >> (32 - shift); +} + +static inline uint_fast32_t hash24(const uint8_t *r, uint32_t shift) +{ + return hash24v(read4_at(r), shift); +} + +static inline uint_fast32_t hash32v_2(const uint64_t r, uint32_t shift) +{ + const uint32_t m = 3266489917U; + return ((uint32_t)r * m) >> (32 - shift); +} + +static inline uint_fast32_t hash32_2(const uint8_t *r, uint32_t shift) +{ + return hash32v_2(read4_at(r), shift); +} + +static inline uint_fast32_t hash32v(const uint64_t r, uint32_t shift) +{ + const uint32_t m = 2654435761U; + return ((uint32_t)r * m) >> (32 - shift); +} + +static inline uint_fast32_t hash32(const uint8_t *r, uint32_t shift) +{ + return hash32v(read4_at(r), shift); +} + +static inline uint_fast32_t hash64v_5b(const uint64_t r, uint32_t shift) +{ + const uint64_t m = 889523592379ULL; + return (uint32_t)(((r << 24) * m) >> (64 - shift)); +} + +static inline uint_fast32_t hash64_5b(const uint8_t *r, uint32_t shift) +{ + return hash64v_5b(read8_at(r), shift); +} + +static inline uint_fast32_t hash64v_6b(const uint64_t r, uint32_t shift) +{ + const uint64_t m = 227718039650203ULL; + return (uint32_t)(((r << 16) * m) >> (64 - shift)); +} + +static inline uint_fast32_t hash64_6b(const uint8_t *r, uint32_t shift) +{ + return hash64v_6b(read8_at(r), shift); +} + +static inline uint_fast32_t hash64v_7b(const uint64_t r, uint32_t shift) +{ + const uint64_t m = 58295818150454627ULL; + return (uint32_t)(((r << 8) * m) >> (64 - shift)); +} + +static inline uint_fast32_t hash64_7b(const uint8_t *r, uint32_t shift) +{ + return hash64v_7b(read8_at(r), shift); +} + +static inline uint_fast32_t hash64v_8b(const uint64_t r, uint32_t shift) +{ + const uint64_t m = 2870177450012600261ULL; + return (uint32_t)((r * m) >> (64 - shift)); +} + +static inline uint_fast32_t hash64_8b(const uint8_t *r, uint32_t shift) +{ + return hash64v_8b(read8_at(r), shift); +} + +static inline void while_lt_copy_x( + uint8_t *dst, + const uint8_t *src, + const uint8_t *dst_end, + const size_t copy_min) +{ + for (; dst < dst_end; dst += copy_min, src += copy_min) + m_copy(dst, src, copy_min); +} + +static inline void copy_x_while_lt( + uint8_t *dst, + const uint8_t *src, + const uint8_t *dst_end, + const size_t copy_min) +{ + m_copy(dst, src, copy_min); + while (dst + copy_min < dst_end) + m_copy(dst += copy_min, src += copy_min, copy_min); +} + +static inline void copy_x_while_total( + uint8_t *dst, + const uint8_t *src, + size_t total, + const size_t copy_min) +{ + m_copy(dst, src, copy_min); + for (; total > copy_min; total-= copy_min) + m_copy(dst += copy_min, src += copy_min, copy_min); +} + +static inline void copy_2x( + uint8_t *dst, + const uint8_t *src, + const size_t copy_min) +{ + m_copy(dst, src, copy_min); + m_copy(dst + copy_min, src + copy_min, copy_min); +} + +static inline void copy_2x_as_x2_while_lt( + uint8_t *dst, + const uint8_t *src, + const uint8_t *dst_end, + const size_t copy_min) +{ + copy_2x(dst, src, copy_min); + while (dst + (copy_min << 1) < dst_end) + copy_2x(dst += (copy_min << 1), src += (copy_min << 1), copy_min); +} + +static inline void while_lt_copy_2x_as_x2( + uint8_t *dst, + const uint8_t *src, + const uint8_t *dst_end, + const size_t copy_min) +{ + for (; dst < dst_end; dst += (copy_min << 1), src += (copy_min << 1)) + copy_2x(dst, src, copy_min); +} + +#endif /* _LZ4K_PRIVATE_H */ -- 2.25.1

2 1

[PATCH OLK-5.10 0/8] xfs: fix some problems recently
by Long Li 29 Jun '23

29 Jun '23

Patchs 1-6 fix some problems recently. Patchs 7-8 backport from mainline. Darrick J. Wong (1): xfs: fix uninitialized variable access Dave Chinner (1): xfs: set XFS_FEAT_NLINK correctly Long Li (4): xfs: factor out xfs_defer_pending_abort xfs: don't leak intent item when recovery intents fail xfs: factor out xfs_destroy_perag() xfs: don't leak perag when growfs fails Ye Bin (1): xfs: fix warning in xfs_vm_writepages() yangerkun (1): xfs: fix mounting failed caused by sequencing problem in the log records fs/xfs/libxfs/xfs_defer.c | 26 +++++++++++++++++--------- fs/xfs/libxfs/xfs_defer.h | 1 + fs/xfs/libxfs/xfs_log_recover.h | 1 + fs/xfs/libxfs/xfs_sb.c | 2 ++ fs/xfs/xfs_buf_item_recover.c | 2 ++ fs/xfs/xfs_fsmap.c | 1 + fs/xfs/xfs_fsops.c | 5 ++++- fs/xfs/xfs_icache.c | 6 ++++++ fs/xfs/xfs_log_recover.c | 27 ++++++++++++++++++++++++--- fs/xfs/xfs_mount.c | 30 ++++++++++++++++++++++-------- fs/xfs/xfs_mount.h | 2 ++ 11 files changed, 82 insertions(+), 21 deletions(-) -- 2.31.1

2 9

[PATCH OLK-5.10] media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
by Chen Jiahao 29 Jun '23

29 Jun '23

From: Takashi Iwai <tiwai(a)suse.de> mainline inclusion from mainline-v6.4-rc3 commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6YKXB CVE: CVE-2023-31084 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like: do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690 For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent. CVE-2023-31084 was assigned to this bug. Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KA… Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de Reported-by: Yu Hao <yhao016(a)ucr.edu> Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Chen Jiahao <chenjiahao16(a)huawei.com> --- drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 06ea30a689d7..579cddec55e5 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -292,14 +292,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, } if (events->eventw == events->eventr) { - int ret; + struct wait_queue_entry wait; + int ret = 0; if (flags & O_NONBLOCK) return -EWOULDBLOCK; - ret = wait_event_interruptible(events->wait_queue, - dvb_frontend_test_event(fepriv, events)); - + init_waitqueue_entry(&wait, current); + add_wait_queue(&events->wait_queue, &wait); + while (!dvb_frontend_test_event(fepriv, events)) { + wait_woken(&wait, TASK_INTERRUPTIBLE, 0); + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + } + remove_wait_queue(&events->wait_queue, &wait); if (ret < 0) return ret; } -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS 1/2] scsi: hisi_sas: Fix normally completed I/O analysed as failed
by Yongqiang Liu 29 Jun '23

29 Jun '23

From: Xingui Yang <yangxingui(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7GS2V CVE: NA ------------------------------------------------------------------- pio read command has no response frame and the struct iu[1024] won't be filled, and it's found that I/Os that are normally completed will be analysed as failed in sas_ata_task_done() when iu contain abnormal dirty data. So ending_fis should not be filled by iu when the response frame hasn't been written to the memory. Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep") Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> Reviewed-by: Xiang Chen <chenxiang66(a)hisilicon.com> Reviewed-by: kang fenglong <kangfenglong(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 23 ++++++++++++++++------- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 23 +++++++++++++++-------- 2 files changed, 31 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 2df70c4873f5..f9867176fa14 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -2033,6 +2033,11 @@ static void slot_err_v2_hw(struct hisi_hba *hisi_hba, u16 dma_tx_err_type = cpu_to_le16(err_record->dma_tx_err_type); u16 sipc_rx_err_type = cpu_to_le16(err_record->sipc_rx_err_type); u32 dma_rx_err_type = cpu_to_le32(err_record->dma_rx_err_type); + struct hisi_sas_complete_v2_hdr *complete_queue = + hisi_hba->complete_hdr[slot->cmplt_queue]; + struct hisi_sas_complete_v2_hdr *complete_hdr = + &complete_queue[slot->cmplt_queue_slot]; + u32 dw0 = le32_to_cpu(complete_hdr->dw0); int error = -1; if (err_phase == 1) { @@ -2318,7 +2323,8 @@ static void slot_err_v2_hw(struct hisi_hba *hisi_hba, break; } } - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); } break; default: @@ -2342,6 +2348,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) &complete_queue[slot->cmplt_queue_slot]; unsigned long flags; bool is_internal = slot->is_internal; + u32 dw0; if (unlikely(!task || !task->lldd_task || !task->dev)) return -EINVAL; @@ -2366,7 +2373,8 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) } /* Use SAS+TMF status codes */ - switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK) + dw0 = le32_to_cpu(complete_hdr->dw0); + switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >> CMPLT_HDR_ABORT_STAT_OFF) { case STAT_IO_ABORTED: /* this io has been aborted by abort command */ @@ -2392,9 +2400,9 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) break; } - if ((complete_hdr->dw0 & CMPLT_HDR_ERX_MSK) && - (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) { - u32 err_phase = (complete_hdr->dw0 & CMPLT_HDR_ERR_PHASE_MSK) + if ((dw0 & CMPLT_HDR_ERX_MSK) && + (!(dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) { + u32 err_phase = (dw0 & CMPLT_HDR_ERR_PHASE_MSK) >> CMPLT_HDR_ERR_PHASE_OFF; u32 *error_info = hisi_sas_status_buf_addr_mem(slot); @@ -2409,7 +2417,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) "CQ hdr: 0x%x 0x%x 0x%x 0x%x " "Error info: 0x%x 0x%x 0x%x 0x%x\n", slot->idx, task, sas_dev->device_id, - complete_hdr->dw0, complete_hdr->dw1, + dw0, complete_hdr->dw1, complete_hdr->act, complete_hdr->dw3, error_info[0], error_info[1], error_info[2], error_info[3]); @@ -2456,7 +2464,8 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: { ts->stat = SAM_STAT_GOOD; - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; } default: diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 5e2488fd2466..f79060fca001 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2353,7 +2353,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; } - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; case SAS_PROTOCOL_SMP: ts->stat = SAM_STAT_CHECK_CONDITION; @@ -2402,6 +2403,7 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) &complete_queue[slot->cmplt_queue_slot]; unsigned long flags; bool is_internal = slot->is_internal; + u32 dw0, dw1, dw3; if (unlikely(!task || !task->lldd_task || !task->dev)) return -EINVAL; @@ -2425,10 +2427,14 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) goto out; } + dw0 = le32_to_cpu(complete_hdr->dw0); + dw1 = le32_to_cpu(complete_hdr->dw1); + dw3 = le32_to_cpu(complete_hdr->dw3); + /* * Use SAS+TMF status codes */ - switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK) + switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >> CMPLT_HDR_ABORT_STAT_OFF) { case STAT_IO_ABORTED: /* this IO has been aborted by abort command */ @@ -2452,9 +2458,9 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) } /* check for erroneous completion, 0x3 means abnormal */ - if ((complete_hdr->dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) { + if ((dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) { u32 *error_info = hisi_sas_status_buf_addr_mem(slot); - u32 device_id = (complete_hdr->dw1 & 0xffff0000) >> 16; + u32 device_id = (dw1 & 0xffff0000) >> 16; struct hisi_sas_itct *itct = &hisi_hba->itct[device_id]; set_aborted_iptt(hisi_hba, slot); @@ -2464,12 +2470,12 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) "Error info: 0x%x 0x%x 0x%x 0x%x\n", slot->idx, task, sas_dev->device_id, itct->sas_addr, - complete_hdr->dw0, complete_hdr->dw1, - complete_hdr->act, complete_hdr->dw3, + dw0, dw1, + complete_hdr->act, dw3, error_info[0], error_info[1], error_info[2], error_info[3]); - if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && + if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && (task->task_proto & SAS_PROTOCOL_SATA || task->task_proto & SAS_PROTOCOL_STP)) { struct hisi_sas_status_buffer *status_buf = @@ -2559,7 +2565,8 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) case SAS_PROTOCOL_STP: case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: ts->stat = SAM_STAT_GOOD; - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; default: ts->stat = SAM_STAT_CHECK_CONDITION; -- 2.25.1

1 1

[PATCH OLK-5.10] arm64: Add AMPERE1 to the Spectre-BHB affected list
by Lin Yujun 29 Jun '23

29 Jun '23

From: D Scott Phillips <scott(a)os.amperecomputing.com> stable inclusion from stable-v5.10.153 commit 52a43b82006dc88f996bd06da5a3fcfef85220c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I64YCA CVE: CVE-2023-3006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ] Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of speculative execution across software contexts," the AMPERE1 core needs the bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of 11. Signed-off-by: D Scott Phillips <scott(a)os.amperecomputing.com> Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.… Reviewed-by: James Morse <james.morse(a)arm.com> Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> conflicts: arch/arm64/include/asm/cputype.h Signed-off-by: Lin Yujun <linyujun809(a)huawei.com> --- arch/arm64/include/asm/cputype.h | 4 ++++ arch/arm64/kernel/proton-pack.c | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 662708c56397..812781fba3f9 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -61,6 +61,7 @@ #define ARM_CPU_IMP_HISI 0x48 #define ARM_CPU_IMP_PHYTIUM 0x70 #define ARM_CPU_IMP_APPLE 0x61 +#define ARM_CPU_IMP_AMPERE 0xC0 #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 @@ -120,6 +121,8 @@ #define APPLE_CPU_PART_M1_ICESTORM 0x022 #define APPLE_CPU_PART_M1_FIRESTORM 0x023 +#define AMPERE_CPU_PART_AMPERE1 0xAC3 + #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) @@ -165,6 +168,7 @@ #define MIDR_FT_2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2500) #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM) #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM) +#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ #define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index e807f77737e0..9c95d4955b6e 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -873,6 +873,10 @@ u8 spectre_bhb_loop_affected(int scope) MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1), {}, }; + static const struct midr_range spectre_bhb_k11_list[] = { + MIDR_ALL_VERSIONS(MIDR_AMPERE1), + {}, + }; static const struct midr_range spectre_bhb_k8_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), @@ -883,6 +887,8 @@ u8 spectre_bhb_loop_affected(int scope) k = 32; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list)) k = 24; + else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list)) + k = 11; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list)) k = 8; -- 2.34.1

1 0

[PATCH openEuler-22.03-LTS] arm64: Add AMPERE1 to the Spectre-BHB affected list
by Lin Yujun 29 Jun '23

29 Jun '23

From: D Scott Phillips <scott(a)os.amperecomputing.com> stable inclusion from stable-v5.10.153 commit 52a43b82006dc88f996bd06da5a3fcfef85220c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I64YCA CVE: CVE-2023-3006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ] Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of speculative execution across software contexts," the AMPERE1 core needs the bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of 11. Signed-off-by: D Scott Phillips <scott(a)os.amperecomputing.com> Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.… Reviewed-by: James Morse <james.morse(a)arm.com> Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> conflicts: arch/arm64/include/asm/cputype.h Signed-off-by: Lin Yujun <linyujun809(a)huawei.com> --- arch/arm64/include/asm/cputype.h | 4 ++++ arch/arm64/kernel/proton-pack.c | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 662708c56397..812781fba3f9 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -61,6 +61,7 @@ #define ARM_CPU_IMP_HISI 0x48 #define ARM_CPU_IMP_PHYTIUM 0x70 #define ARM_CPU_IMP_APPLE 0x61 +#define ARM_CPU_IMP_AMPERE 0xC0 #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 @@ -120,6 +121,8 @@ #define APPLE_CPU_PART_M1_ICESTORM 0x022 #define APPLE_CPU_PART_M1_FIRESTORM 0x023 +#define AMPERE_CPU_PART_AMPERE1 0xAC3 + #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) @@ -165,6 +168,7 @@ #define MIDR_FT_2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2500) #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM) #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM) +#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ #define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index e807f77737e0..9c95d4955b6e 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -873,6 +873,10 @@ u8 spectre_bhb_loop_affected(int scope) MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1), {}, }; + static const struct midr_range spectre_bhb_k11_list[] = { + MIDR_ALL_VERSIONS(MIDR_AMPERE1), + {}, + }; static const struct midr_range spectre_bhb_k8_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), @@ -883,6 +887,8 @@ u8 spectre_bhb_loop_affected(int scope) k = 32; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list)) k = 24; + else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list)) + k = 11; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list)) k = 8; -- 2.34.1

1 0

[PATCH openEuler-1.0-LTS] drm/msm/dpu: Add check for pstates
by Yongqiang Liu 29 Jun '23

29 Jun '23

From: Xia Fukun <xiafukun(a)huawei.com> stable inclusion from stable-v4.19.287 commit c746a0b9210cebb29511f01d2becf240408327bf category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F2UT CVE: CVE-2023-3220 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ] As kzalloc may fail and return NULL pointer, it should be better to check pstates in order to avoid the NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk(a)quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514160/ Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Reviewed-by: zheng zucheng <zhengzucheng(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index 4752f08f0884..5852e1d356e1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -1477,6 +1477,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, } pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL); + if (!pstates) + return -ENOMEM; dpu_crtc = to_dpu_crtc(crtc); cstate = to_dpu_crtc_state(state); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
by Yongqiang Liu 28 Jun '23

28 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.4-rc1 commit 2b947f8769be8b8181dc795fd292d3e7120f5204 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDYS CVE: CVE-2023-35828 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> Reviewed-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index a5254e82d628..3cbb372db432 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2477,6 +2477,7 @@ static int renesas_usb3_remove(struct platform_device *pdev) debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); + cancel_work_sync(&usb3->role_work); usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); -- 2.25.1

1 0

[PATCH OLK-5.10] mm: shmem: Fix UAF bug in shmem_show_options()
by Tu Jinjiang 28 Jun '23

28 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I78SU1 CVE: NA ------------------------------------------- shmem_show_options() uses sbinfo->mpol without adding it's refcnt. This may lead to race with replacement of the mpol by remount. The execution sequence is as follows. CPU0 CPU1 shmem_show_options() shmem_reconfigure() shmem_show_mpol(seq, sbinfo->mpol) mpol = sbinfo->mpol mpol_put(mpol) mpol->mode The KASAN report is as follows. BUG: KASAN: slab-use-after-free in shmem_show_options+0x21b/0x340 Read of size 2 at addr ffff888124324004 by task mount/2388 Call Trace: <TASK> dump_stack_lvl+0x37/0x50 print_report+0xd0/0x620 ? shmem_show_options+0x21b/0x340 ? __virt_addr_valid+0xf4/0x180 ? shmem_show_options+0x21b/0x340 kasan_report+0xb8/0xe0 ? shmem_show_options+0x21b/0x340 shmem_show_options+0x21b/0x340 ? __pfx_shmem_show_options+0x10/0x10 ? strchr+0x2c/0x50 ? strlen+0x23/0x40 ? seq_puts+0x7d/0x90 show_vfsmnt+0x1e6/0x260 ? __pfx_show_vfsmnt+0x10/0x10 ? __kasan_kmalloc+0x7f/0x90 seq_read_iter+0x57a/0x740 vfs_read+0x2e2/0x4a0 ? __pfx_vfs_read+0x10/0x10 ? down_write_killable+0xb8/0x140 ? __pfx_down_write_killable+0x10/0x10 ? __fget_light+0xa9/0x1e0 ? up_write+0x3f/0x80 ksys_read+0xb8/0x150 ? __pfx_ksys_read+0x10/0x10 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x2d/0x120 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc </TASK> Allocated by task 2387: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x59/0x70 kmem_cache_alloc+0xdd/0x220 mpol_new+0x83/0x150 mpol_parse_str+0x280/0x4a0 shmem_parse_one+0x364/0x520 vfs_parse_fs_param+0xf8/0x1a0 vfs_parse_fs_string+0xc9/0x130 shmem_parse_options+0xb2/0x110 path_mount+0x597/0xdf0 do_mount+0xcd/0xf0 __x64_sys_mount+0xbd/0x100 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 2389: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 kmem_cache_free+0x9c/0x350 shmem_reconfigure+0x278/0x370 reconfigure_super+0x383/0x450 path_mount+0xcc5/0xdf0 do_mount+0xcd/0xf0 __x64_sys_mount+0xbd/0x100 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The buggy address belongs to the object at ffff888124324000 which belongs to the cache numa_policy of size 32 The buggy address is located 4 bytes inside of freed 32-byte region [ffff888124324000, ffff888124324020) ================================================================== To fix the bug, shmem_get_sbmpol() / mpol_put() needs to be called before / after shmem_show_mpol() call. Signed-off-by: Tu Jinjiang <tujinjiang(a)huawei.com> --- mm/shmem.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/shmem.c b/mm/shmem.c index f7caf1dec81c..93c4a3de558d 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -3637,6 +3637,7 @@ static int shmem_reconfigure(struct fs_context *fc) static int shmem_show_options(struct seq_file *seq, struct dentry *root) { struct shmem_sb_info *sbinfo = SHMEM_SB(root->d_sb); + struct mempolicy *mpol; if (sbinfo->max_blocks != shmem_default_max_blocks()) seq_printf(seq, ",size=%luk", @@ -3679,7 +3680,9 @@ static int shmem_show_options(struct seq_file *seq, struct dentry *root) if (sbinfo->huge) seq_printf(seq, ",huge=%s", shmem_format_huge(sbinfo->huge)); #endif - shmem_show_mpol(seq, sbinfo->mpol); + mpol = shmem_get_sbmpol(sbinfo); + shmem_show_mpol(seq, mpol); + mpol_put(mpol); return 0; } -- 2.25.1

2 1

[PATCH OLK-5.10] drm/msm/dpu: Add check for pstates
by Xia Fukun 28 Jun '23

28 Jun '23

stable inclusion from stable-v5.10.173 commit e9743b3052e125c44b555f07f2876a4bdccfd983 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F2UT CVE: CVE-2023-3220 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ] As kzalloc may fail and return NULL pointer, it should be better to check pstates in order to avoid the NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk(a)quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514160/ Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index f56414a06ec4..9bc4a1cd9ac6 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -831,6 +831,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, struct drm_rect crtc_rect = { 0 }; pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL); + if (!pstates) + return -ENOMEM; if (!state->enable || !state->active) { DPU_DEBUG("crtc%d -> enable %d, active %d, skip atomic_check\n", -- 2.17.1

2 1

openEuler Kernel SIG 双周例会
by openEuler conference 28 Jun '23

28 Jun '23

您好！ Kernel SIG 邀请您参加 2023-06-30 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG 双周例会会议内容： 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以直接回复邮件，或录入会议看板）会议链接：https://us06web.zoom.us/j/81270448575?pwd=WElDeFQ1azluejNHcXR0a3Y4R1VHUT09 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-06-30 14:00, The subject of the conference is openEuler Kernel SIG 双周例会, Summary: 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以直接回复邮件，或录入会议看板） You can join the meeting at https://us06web.zoom.us/j/81270448575?pwd=WElDeFQ1azluejNHcXR0a3Y4R1VHUT09. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH OLK-5.10] usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
by Jialin Zhang 28 Jun '23

28 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.4-rc1 commit 2b947f8769be8b8181dc795fd292d3e7120f5204 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDYS CVE: CVE-2023-35828 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 601829a6b4ba..a10f41c4a3f2 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2568,6 +2568,7 @@ static int renesas_usb3_remove(struct platform_device *pdev) debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); + cancel_work_sync(&usb3->role_work); usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); -- 2.25.1

2 1

[PATCH OLK-5.10] ethtool: Fix link extended state for big endian
by Zhengchao Shao 28 Jun '23

28 Jun '23

From: Moshe Tal <moshet(a)nvidia.com> mainline inclusion from mainline-v5.17-rc2 commit e2f08207c558bc0bc8abaa557cdb29bad776ac7b category: feature bugzilla: 188943 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- The link extended sub-states are assigned as enum that is an integer size but read from a union as u8, this is working for small values on little endian systems but for big endian this always give 0. Fix the variable in the union to match the enum size. Fixes: ecc31c60240b ("ethtool: Add link extended state") Signed-off-by: Moshe Tal <moshet(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Tested-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Gal Pressman <gal(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: include/linux/ethtool.h Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- include/linux/ethtool.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 726c1b27f3c4..cdfb3cc0951d 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -112,7 +112,7 @@ struct ethtool_link_ext_state_info { enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch; enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity; enum ethtool_link_ext_substate_cable_issue cable_issue; - u8 __link_ext_substate; + u32 __link_ext_substate; }; }; -- 2.34.1

2 1

[PATCH OLK-5.10,v2] ethtool: Fix link extended state for big endian
by Zhengchao Shao 28 Jun '23

28 Jun '23

From: Moshe Tal <moshet(a)nvidia.com> mainline inclusion from mainline-v5.17-rc2 commit e2f08207c558bc0bc8abaa557cdb29bad776ac7b category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7GNV3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- The link extended sub-states are assigned as enum that is an integer size but read from a union as u8, this is working for small values on little endian systems but for big endian this always give 0. Fix the variable in the union to match the enum size. Fixes: ecc31c60240b ("ethtool: Add link extended state") Signed-off-by: Moshe Tal <moshet(a)nvidia.com> Reviewed-by: Ido Schimmel <idosch(a)nvidia.com> Tested-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Gal Pressman <gal(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: include/linux/ethtool.h Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- v2: modify comment --- include/linux/ethtool.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 726c1b27f3c4..cdfb3cc0951d 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -112,7 +112,7 @@ struct ethtool_link_ext_state_info { enum ethtool_link_ext_substate_link_logical_mismatch link_logical_mismatch; enum ethtool_link_ext_substate_bad_signal_integrity bad_signal_integrity; enum ethtool_link_ext_substate_cable_issue cable_issue; - u8 __link_ext_substate; + u32 __link_ext_substate; }; }; -- 2.34.1

1 0

[PATCH OLK-5.10 0/2] Two CVE fixes of ksmbd
by ZhaoLong Wang 28 Jun '23

28 Jun '23

CVE fixes: CVE-2023-32255 CVE-2023-32248 *** BLURB HERE *** Namjae Jeon (2): ksmbd: fix memleak in session setup ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() fs/ksmbd/smb2pdu.c | 7 +++++++ 1 file changed, 7 insertions(+) -- 2.31.1

2 3

[PATCH 0/2] Two CVE fixes of ksmbd
by ZhaoLong Wang 27 Jun '23

27 Jun '23

CVE fixes: CVE-2023-32255 CVE-2023-32248 *** BLURB HERE *** Namjae Jeon (2): ksmbd: fix memleak in session setup ksmbd: fix NULL pointer dereference in smb2_get_info_filesystem() fs/ksmbd/smb2pdu.c | 7 +++++++ 1 file changed, 7 insertions(+) -- 2.31.1

1 2

[PATCH] Add hugetlb_optimize_vmemmap_key and __x86_return_thunk to kabi whitelist
by Jialin Zhang 27 Jun '23

27 Jun '23

bugzilla: https://gitee.com/openeuler/kernel/issues/I7GJJY Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- Module.kabi_aarch64 | 1 + Module.kabi_x86_64 | 2 ++ kabi_whitelist_aarch64 | 1 + kabi_whitelist_x86_64 | 2 ++ kernel.spec | 5 ++++- 5 files changed, 10 insertions(+), 1 deletion(-) diff --git a/Module.kabi_aarch64 b/Module.kabi_aarch64 index 104b60e..5aa0dd1 100644 --- a/Module.kabi_aarch64 +++ b/Module.kabi_aarch64 @@ -1111,6 +1111,7 @@ 0x21713595 hrtimer_init vmlinux EXPORT_SYMBOL_GPL 0x8dd504f3 hrtimer_start_range_ns vmlinux EXPORT_SYMBOL_GPL 0xa452f5f1 hrtimer_try_to_cancel vmlinux EXPORT_SYMBOL_GPL +0xbcb36fe4 hugetlb_optimize_vmemmap_key vmlinux EXPORT_SYMBOL 0xdda8dc9c __hw_addr_sync_dev vmlinux EXPORT_SYMBOL 0xc5d47b9a __hw_addr_unsync_dev vmlinux EXPORT_SYMBOL 0xea6847b6 hwmon_device_register vmlinux EXPORT_SYMBOL_GPL diff --git a/Module.kabi_x86_64 b/Module.kabi_x86_64 index 9c3ef26..5159a19 100644 --- a/Module.kabi_x86_64 +++ b/Module.kabi_x86_64 @@ -1236,6 +1236,7 @@ 0x21713595 hrtimer_init vmlinux EXPORT_SYMBOL_GPL 0x8dd504f3 hrtimer_start_range_ns vmlinux EXPORT_SYMBOL_GPL 0xa452f5f1 hrtimer_try_to_cancel vmlinux EXPORT_SYMBOL_GPL +0xbcb36fe4 hugetlb_optimize_vmemmap_key vmlinux EXPORT_SYMBOL 0xf689728b __hw_addr_sync_dev vmlinux EXPORT_SYMBOL 0x8b743647 __hw_addr_unsync_dev vmlinux EXPORT_SYMBOL 0xa3633bba hwmon_device_register vmlinux EXPORT_SYMBOL_GPL @@ -3108,6 +3109,7 @@ 0xd979a547 __x86_indirect_thunk_rdi vmlinux EXPORT_SYMBOL 0xb601be4c __x86_indirect_thunk_rdx vmlinux EXPORT_SYMBOL 0xa1f9a134 __x86_indirect_thunk_rsi vmlinux EXPORT_SYMBOL +0x5b8239ca __x86_return_thunk vmlinux EXPORT_SYMBOL 0x9114b616 __xa_alloc vmlinux EXPORT_SYMBOL 0xb04a43ad __xa_alloc_cyclic vmlinux EXPORT_SYMBOL 0x0a0ebc08 __xa_cmpxchg vmlinux EXPORT_SYMBOL diff --git a/kabi_whitelist_aarch64 b/kabi_whitelist_aarch64 index 58c9450..3ee346e 100644 --- a/kabi_whitelist_aarch64 +++ b/kabi_whitelist_aarch64 @@ -1112,6 +1112,7 @@ hrtimer_init hrtimer_start_range_ns hrtimer_try_to_cancel + hugetlb_optimize_vmemmap_key __hw_addr_sync_dev __hw_addr_unsync_dev hwmon_device_register diff --git a/kabi_whitelist_x86_64 b/kabi_whitelist_x86_64 index 4724b46..4cf5de1 100644 --- a/kabi_whitelist_x86_64 +++ b/kabi_whitelist_x86_64 @@ -1237,6 +1237,7 @@ hrtimer_init hrtimer_start_range_ns hrtimer_try_to_cancel + hugetlb_optimize_vmemmap_key __hw_addr_sync_dev __hw_addr_unsync_dev hwmon_device_register @@ -3109,6 +3110,7 @@ __x86_indirect_thunk_rdi __x86_indirect_thunk_rdx __x86_indirect_thunk_rsi + __x86_return_thunk __xa_alloc __xa_alloc_cyclic __xa_cmpxchg diff --git a/kernel.spec b/kernel.spec index 9ca5de2..8929234 100644 --- a/kernel.spec +++ b/kernel.spec @@ -12,7 +12,7 @@ %global upstream_sublevel 0 %global devel_release 153 %global maintenance_release .12.0 -%global pkg_release .89 +%global pkg_release .90 %define with_debuginfo 1 # Do not recompute the build-id of vmlinux in find-debuginfo.sh @@ -910,6 +910,9 @@ fi %endif %changelog +* Tue Jun 27 2023 Jialin Zhang <zhangjialin11(a)huawei.com> - 5.10.0-153.12.0.90 +- Add hugetlb_optimize_vmemmap_key and __x86_return_thunk to kabi whitelist + * Sun Jun 25 2023 Zheng Zengkai <zhengzengkai(a)huawei.com> - 5.10.0-153.12.0.89 - !1189 [sync] PR-1177: net/sched: flower: fix possible OOB write in fl_set_geneve_opt() - !1226 [sync] PR-1221: media: rkvdec: fix use after free bug in rkvdec_remove -- 2.25.1

1 0

[PATCH OLK-5.10] media: saa7134: fix use after free bug in saa7134_finidev due to race condition
by Longlong Xia 27 Jun '23

27 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.180 commit 7dac96e9cc985328ec1fae92f0c245f559dc0e11 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ERIV CVE: CVE-2023-3327 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 30cf57da176cca80f11df0d9b7f71581fe601389 ] In saa7134_initdev, it will call saa7134_hwinit1. There are three function invoking here: saa7134_video_init1, saa7134_ts_init1 and saa7134_vbi_init1. All of them will init a timer with same function. Take saa7134_video_init1 as an example. It'll bound &dev->video_q.timeout with saa7134_buffer_timeout. In buffer_activate, the timer funtcion is started. If we remove the module or device which will call saa7134_finidev to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the timer works accordingly before cleanup in saa7134_finidev. CPU0 CPU1 |saa7134_buffer_timeout saa7134_finidev | kfree(dev); | | | saa7134_buffer_next | //use dev Fixes: 1e7126b4a86a ("media: saa7134: Convert timers to use timer_setup()") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Longlong Xia <xialonglong1(a)huawei.com> --- drivers/media/pci/saa7134/saa7134-ts.c | 1 + drivers/media/pci/saa7134/saa7134-vbi.c | 1 + drivers/media/pci/saa7134/saa7134-video.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c index 6a5053126237..437dbe5e75e2 100644 --- a/drivers/media/pci/saa7134/saa7134-ts.c +++ b/drivers/media/pci/saa7134/saa7134-ts.c @@ -300,6 +300,7 @@ int saa7134_ts_start(struct saa7134_dev *dev) int saa7134_ts_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->ts_q.timeout); saa7134_pgtable_free(dev->pci, &dev->ts_q.pt); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c index 3f0b0933eed6..3e773690468b 100644 --- a/drivers/media/pci/saa7134/saa7134-vbi.c +++ b/drivers/media/pci/saa7134/saa7134-vbi.c @@ -185,6 +185,7 @@ int saa7134_vbi_init1(struct saa7134_dev *dev) int saa7134_vbi_fini(struct saa7134_dev *dev) { /* nothing */ + del_timer_sync(&dev->vbi_q.timeout); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c index 85d082baaadc..df9e3293015a 100644 --- a/drivers/media/pci/saa7134/saa7134-video.c +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -2153,6 +2153,7 @@ int saa7134_video_init1(struct saa7134_dev *dev) void saa7134_video_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->video_q.timeout); /* free stuff */ saa7134_pgtable_free(dev->pci, &dev->video_q.pt); saa7134_pgtable_free(dev->pci, &dev->vbi_q.pt); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] HID: intel_ish-hid: Add check for ishtp_dma_tx_map
by Yongqiang Liu 27 Jun '23

27 Jun '23

From: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> stable inclusion from stable-v4.19.272 commit cc906a3a4432da143ab3d2e894f99ddeff500cd3 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7FCLX CVE: CVE-2023-3358 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit b3d40c3ec3dc4ad78017de6c3a38979f57aaaab8 ] As the kcalloc may return NULL pointer, it should be better to check the ishtp_dma_tx_map before use in order to avoid NULL pointer dereference. Fixes: 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Acked-by: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> Reviewed-by: GUO Zihua<guozihua(a)huawei.com> Reviewed-by: GONG, Ruiqi <gongruiqi1(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/hid/intel-ish-hid/ishtp/dma-if.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/hid/intel-ish-hid/ishtp/dma-if.c b/drivers/hid/intel-ish-hid/ishtp/dma-if.c index 2783f3666114..ff4419c8ed4f 100644 --- a/drivers/hid/intel-ish-hid/ishtp/dma-if.c +++ b/drivers/hid/intel-ish-hid/ishtp/dma-if.c @@ -113,6 +113,11 @@ void *ishtp_cl_get_dma_send_buf(struct ishtp_device *dev, int required_slots = (size / DMA_SLOT_SIZE) + 1 * (size % DMA_SLOT_SIZE != 0); + if (!dev->ishtp_dma_tx_map) { + dev_err(dev->devc, "Fail to allocate Tx map\n"); + return NULL; + } + spin_lock_irqsave(&dev->ishtp_dma_tx_lock, flags); for (i = 0; i <= (dev->ishtp_dma_num_slots - required_slots); i++) { free = 1; @@ -159,6 +164,11 @@ void ishtp_cl_release_dma_acked_mem(struct ishtp_device *dev, return; } + if (!dev->ishtp_dma_tx_map) { + dev_err(dev->devc, "Fail to allocate Tx map\n"); + return; + } + i = (msg_addr - dev->ishtp_host_dma_tx_buf) / DMA_SLOT_SIZE; spin_lock_irqsave(&dev->ishtp_dma_tx_lock, flags); for (j = 0; j < acked_slots; j++) { -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] media: saa7134: fix use after free bug in saa7134_finidev due to race condition
by Yongqiang Liu 27 Jun '23

27 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v4.19.283 commit 95e684340470a95ff4957cb9a536ec7a0461c75b category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ERIV CVE: CVE-2023-3327 -------------------------------- [ Upstream commit 30cf57da176cca80f11df0d9b7f71581fe601389 ] In saa7134_initdev, it will call saa7134_hwinit1. There are three function invoking here: saa7134_video_init1, saa7134_ts_init1 and saa7134_vbi_init1. All of them will init a timer with same function. Take saa7134_video_init1 as an example. It'll bound &dev->video_q.timeout with saa7134_buffer_timeout. In buffer_activate, the timer funtcion is started. If we remove the module or device which will call saa7134_finidev to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the timer works accordingly before cleanup in saa7134_finidev. CPU0 CPU1 |saa7134_buffer_timeout saa7134_finidev | kfree(dev); | | | saa7134_buffer_next | //use dev Fixes: 1e7126b4a86a ("media: saa7134: Convert timers to use timer_setup()") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Longlong Xia <xialonglong1(a)huawei.com> Reviewed-by: Nanyong Sun <sunnanyong(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/media/pci/saa7134/saa7134-ts.c | 1 + drivers/media/pci/saa7134/saa7134-vbi.c | 1 + drivers/media/pci/saa7134/saa7134-video.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c index 2be703617e29..e7adcd4f9962 100644 --- a/drivers/media/pci/saa7134/saa7134-ts.c +++ b/drivers/media/pci/saa7134/saa7134-ts.c @@ -309,6 +309,7 @@ int saa7134_ts_start(struct saa7134_dev *dev) int saa7134_ts_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->ts_q.timeout); saa7134_pgtable_free(dev->pci, &dev->ts_q.pt); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c index 57bea543c39b..559db500b19c 100644 --- a/drivers/media/pci/saa7134/saa7134-vbi.c +++ b/drivers/media/pci/saa7134/saa7134-vbi.c @@ -194,6 +194,7 @@ int saa7134_vbi_init1(struct saa7134_dev *dev) int saa7134_vbi_fini(struct saa7134_dev *dev) { /* nothing */ + del_timer_sync(&dev->vbi_q.timeout); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c index 1a50ec9d084f..103cbc8c1345 100644 --- a/drivers/media/pci/saa7134/saa7134-video.c +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -2213,6 +2213,7 @@ int saa7134_video_init1(struct saa7134_dev *dev) void saa7134_video_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->video_q.timeout); /* free stuff */ vb2_queue_release(&dev->video_vbq); saa7134_pgtable_free(dev->pci, &dev->video_q.pt); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] config: enable CONFIG_QOS_SCHED_SMART_GRID by default
by Zhang Changzhong 27 Jun '23

27 Jun '23

From: Wang ShaoBo <bobo.shaobowang(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7G6SW CVE: NA -------------------------------- set config CONFIG_QOS_SCHED_SMART_GRID default value. Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Reviewed-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Reviewed-by: Chao Liu <liuchao173(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 95225e2..60b1db8 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6004,6 +6004,7 @@ CONFIG_IO_STRICT_DEVMEM=y # CONFIG_ARM64_RELOC_TEST is not set # CONFIG_CORESIGHT is not set CONFIG_SMMU_BYPASS_DEV=y +CONFIG_QOS_SCHED_SMART_GRID=y CONFIG_ETMEM_SCAN=m CONFIG_ETMEM_SWAP=m CONFIG_STAGING=y -- 2.9.5

1 0

[PATCH openEuler-22.03-LTS 0/2] hugetlb: Fix some incorrect behavior
by Liu Shixin 27 Jun '23

27 Jun '23

Fix two bugfix of hugetlb: 1) Invalid use of nr_online_nodes; 2) Inconsistency between 1G hugepage and 2M hugepage. Peng Liu (2): hugetlb: fix wrong use of nr_online_nodes hugetlb: fix hugepages_setup when deal with pernode mm/hugetlb.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) -- 2.25.1

2 3

[PATCH OLK-5.10] HID: intel_ish-hid: Add check for ishtp_dma_tx_map
by Cai Xinchen 27 Jun '23

27 Jun '23

From: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> stable inclusion from stable-v5.10.166 commit 7b4516ba56f1fcb13ffc91912f3074e28362228d category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7FCLX CVE: CVE-2023-3358 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ---------------------------------------- [ Upstream commit b3d40c3ec3dc4ad78017de6c3a38979f57aaaab8 ] As the kcalloc may return NULL pointer, it should be better to check the ishtp_dma_tx_map before use in order to avoid NULL pointer dereference. Fixes: 3703f53b99e4 ("HID: intel_ish-hid: ISH Transport layer") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Acked-by: Srinivas Pandruvada <srinivas.pandruvada(a)linux.intel.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cai Xinchen <caixinchen1(a)huawei.com> --- drivers/hid/intel-ish-hid/ishtp/dma-if.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/hid/intel-ish-hid/ishtp/dma-if.c b/drivers/hid/intel-ish-hid/ishtp/dma-if.c index 40554c8daca0..00046cbfd4ed 100644 --- a/drivers/hid/intel-ish-hid/ishtp/dma-if.c +++ b/drivers/hid/intel-ish-hid/ishtp/dma-if.c @@ -104,6 +104,11 @@ void *ishtp_cl_get_dma_send_buf(struct ishtp_device *dev, int required_slots = (size / DMA_SLOT_SIZE) + 1 * (size % DMA_SLOT_SIZE != 0); + if (!dev->ishtp_dma_tx_map) { + dev_err(dev->devc, "Fail to allocate Tx map\n"); + return NULL; + } + spin_lock_irqsave(&dev->ishtp_dma_tx_lock, flags); for (i = 0; i <= (dev->ishtp_dma_num_slots - required_slots); i++) { free = 1; @@ -150,6 +155,11 @@ void ishtp_cl_release_dma_acked_mem(struct ishtp_device *dev, return; } + if (!dev->ishtp_dma_tx_map) { + dev_err(dev->devc, "Fail to allocate Tx map\n"); + return; + } + i = (msg_addr - dev->ishtp_host_dma_tx_buf) / DMA_SLOT_SIZE; spin_lock_irqsave(&dev->ishtp_dma_tx_lock, flags); for (j = 0; j < acked_slots; j++) { -- 2.17.1

2 1

[PATCH OLK-5.10] mm/hugetlb_vmemmap: remap head page to newly allocated page
by Liu Shixin 26 Jun '23

26 Jun '23

From: Joao Martins <joao.m.martins(a)oracle.com> mainline inclusion from mainline-v6.2-rc1 commit 11aad2631bf74b3c811dee76154702aab855a323 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6SROX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Today with `hugetlb_free_vmemmap=on` the struct page memory that is freed back to page allocator is as following: for a 2M hugetlb page it will reuse the first 4K vmemmap page to remap the remaining 7 vmemmap pages, and for a 1G hugetlb it will remap the remaining 4095 vmemmap pages. Essentially, that means that it breaks the first 4K of a potentially contiguous chunk of memory of 32K (for 2M hugetlb pages) or 16M (for 1G hugetlb pages). For this reason the memory that it's free back to page allocator cannot be used for hugetlb to allocate huge pages of the same size, but rather only of a smaller huge page size: Trying to assign a 64G node to hugetlb (on a 128G 2node guest, each node having 64G): * Before allocation: Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 ... Node 0, zone Normal, type Movable 340 100 32 15 1 2 0 0 0 1 15558 $ echo 32768 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages $ cat /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages 31987 * After: Node 0, zone Normal, type Movable 30893 32006 31515 7 0 0 0 0 0 0 0 Notice how the memory freed back are put back into 4K / 8K / 16K page pools. And it allocates a total of 31987 pages (63974M). To fix this behaviour rather than remapping second vmemmap page (thus breaking the contiguous block of memory backing the struct pages) repopulate the first vmemmap page with a new one. We allocate and copy from the currently mapped vmemmap page, and then remap it later on. The same algorithm works if there's a pre initialized walk::reuse_page and the head page doesn't need to be skipped and instead we remap it when the @addr being changed is the @reuse_addr. The new head page is allocated in vmemmap_remap_free() given that on restore there's no need for functional change. Note that, because right now one hugepage is remapped at a time, thus only one free 4K page at a time is needed to remap the head page. Should it fail to allocate said new page, it reuses the one that's already mapped just like before. As a result, for every 64G of contiguous hugepages it can give back 1G more of contiguous memory per 64G, while needing in total 128M new 4K pages (for 2M hugetlb) or 256k (for 1G hugetlb). After the changes, try to assign a 64G node to hugetlb (on a 128G 2node guest, each node with 64G): * Before allocation Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 ... Node 0, zone Normal, type Movable 1 1 1 0 0 1 0 0 1 1 15564 $ echo 32768 > /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages $ cat /sys/devices/system/node/node0/hugepages/hugepages-2048kB/nr_hugepages 32394 * After: Node 0, zone Normal, type Movable 0 50 97 108 96 81 70 46 18 0 0 In the example above, 407 more hugeltb 2M pages are allocated i.e. 814M out of the 32394 (64788M) allocated. So the memory freed back is indeed being used back in hugetlb and there's no massive order-0..order-2 pages accumulated unused. [joao.m.martins(a)oracle.com: v3] Link: https://lkml.kernel.org/r/20221109200623.96867-1-joao.m.martins@oracle.com [joao.m.martins(a)oracle.com: add smp_wmb() to ensure page contents are visible prior to PTE write] Link: https://lkml.kernel.org/r/20221110121214.6297-1-joao.m.martins@oracle.com Link: https://lkml.kernel.org/r/20221107153922.77094-1-joao.m.martins@oracle.com Signed-off-by: Joao Martins <joao.m.martins(a)oracle.com> Reviewed-by: Muchun Song <songmuchun(a)bytedance.com> Cc: Mike Kravetz <mike.kravetz(a)oracle.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Conflicts: mm/hugetlb_vmemmap.c Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> --- mm/sparse-vmemmap.c | 41 ++++++++++++++++++++++++++++++++++------- 1 file changed, 34 insertions(+), 7 deletions(-) diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index a5c2efcf59e2..6803c89c5d21 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -221,12 +221,7 @@ static int vmemmap_remap_range(unsigned long start, unsigned long end, return ret; } while (pgd++, addr = next, addr != end); - /* - * We only change the mapping of the vmemmap virtual address range - * [@start + PAGE_SIZE, end), so we only need to flush the TLB which - * belongs to the range. - */ - flush_tlb_kernel_range(start + PAGE_SIZE, end); + flush_tlb_kernel_range(start, end); return 0; } @@ -264,9 +259,23 @@ static void vmemmap_remap_pte(pte_t *pte, unsigned long addr, * to the tail pages. */ pgprot_t pgprot = PAGE_KERNEL_RO; - pte_t entry = mk_pte(walk->reuse_page, pgprot); struct page *page = pte_page(*pte); + pte_t entry; + /* Remapping the head page requires r/w */ + if (unlikely(addr == walk->reuse_addr)) { + pgprot = PAGE_KERNEL; + list_del(&walk->reuse_page->lru); + + /* + * Makes sure that preceding stores to the page contents from + * vmemmap_remap_free() become visible before the set_pte_at() + * write. + */ + smp_wmb(); + } + + entry = mk_pte(walk->reuse_page, pgprot); list_add_tail(&page->lru, walk->vmemmap_pages); set_pte_at(&init_mm, addr, pte, entry); } @@ -331,6 +340,24 @@ int vmemmap_remap_free(unsigned long start, unsigned long end, .reuse_addr = reuse, .vmemmap_pages = &vmemmap_pages, }; + int nid = page_to_nid((struct page *)start); + gfp_t gfp_mask = GFP_KERNEL | __GFP_THISNODE | __GFP_NORETRY | + __GFP_NOWARN; + + /* + * Allocate a new head vmemmap page to avoid breaking a contiguous + * block of struct page memory when freeing it back to page allocator + * in free_vmemmap_page_list(). This will allow the likely contiguous + * struct page backing memory to be kept contiguous and allowing for + * more allocations of hugepages. Fallback to the currently + * mapped head page in case should it fail to allocate. + */ + walk.reuse_page = alloc_pages_node(nid, gfp_mask, 0); + if (walk.reuse_page) { + copy_page(page_to_virt(walk.reuse_page), + (void *)walk.reuse_addr); + list_add(&walk.reuse_page->lru, &vmemmap_pages); + } /* * In order to make remapping routine most efficient for the huge pages, -- 2.25.1

2 1

[PATCH OLK-5.10 0/2] hugetlb: Fix some incorrect behavior
by Liu Shixin 26 Jun '23

26 Jun '23

Fix two bugfix of hugetlb: 1) Invalid use of nr_online_nodes; 2) Inconsistency between 1G hugepage and 2M hugepage. Peng Liu (2): hugetlb: fix wrong use of nr_online_nodes hugetlb: fix hugepages_setup when deal with pernode mm/hugetlb.c | 26 +++++++++++++++++++------- 1 file changed, 19 insertions(+), 7 deletions(-) -- 2.25.1

2 3

[PATCH openEuler-22.03-LTS-SP2 0/2] set the iova rcache global
by Zhang Zekun 26 Jun '23

26 Jun '23

The iova rcache will have performance problem, set the iova rcache global mag max size to 128 to fix it. Zhang Zekun (2): iommu/iova: increase the iova_rcache depot max size config: enable set the max iova mag size to 128 arch/arm64/configs/openeuler_defconfig | 1 + drivers/iommu/Kconfig | 10 ++++++++++ include/linux/iova.h | 2 +- 3 files changed, 12 insertions(+), 1 deletion(-) -- 2.17.1

3 4

[PATCH openEuler-1.0-LTS] mm: oom: move memcg_print_bad_task() out of mem_cgroup_scan_tasks()
by Yongqiang Liu 26 Jun '23

26 Jun '23

From: Kang Chen <void0red(a)hust.edu.cn> hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 CVE: NA -------------------------------- raw call flow: oom_kill_process -> mem_cgroup_scan_tasks(.., .., message) -> memcg_print_bad_task(message, ..) message is "const char*" type, and incorrectly cast to "oom_control*" type in memcg_print_bad_task. Fix it by moving memcg_print_bad_task out of mem_cgroup_scan_tasks and call it in select_bad_process and dump_tasks. Furthermore, use struct oom_control* directly and remove the useless parm `ret`. Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> (cherry picked from commit 789038c7436e6dc0efb144114992134a52233dbd) Conflicts: include/linux/memcontrol.h [Add declaration of memcg_print_bad_task()] mm/memcontrol.c mm/oom_kill.c Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- include/linux/memcontrol.h | 10 +++++++++- mm/memcontrol.c | 15 +++++++++------ mm/oom_kill.c | 14 ++++++++------ 3 files changed, 26 insertions(+), 13 deletions(-) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 23db8eec0755..1cb695fb83c7 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -35,6 +35,7 @@ struct mem_cgroup; struct page; struct mm_struct; struct kmem_cache; +struct oom_control; /* Cgroup-specific page state, on top of universal node page state */ enum memcg_stat_item { @@ -354,9 +355,11 @@ DECLARE_STATIC_KEY_FALSE(memcg_qos_stat_key); bool memcg_low_priority_scan_tasks(int (*)(struct task_struct *, void *), void *); -void memcg_print_bad_task(void *arg, int ret); +void memcg_print_bad_task(struct oom_control *oc); extern int sysctl_memcg_qos_handler(struct ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos); +#else +void memcg_print_bad_task(struct oom_control *oc); #endif /* @@ -1132,6 +1135,11 @@ static inline void count_memcg_event_mm(struct mm_struct *mm, enum vm_event_item idx) { } + +static inline void memcg_print_bad_task(struct oom_control *oc) +{ +} + #endif /* CONFIG_MEMCG */ /* idx can be of type enum memcg_stat_item or node_stat_item */ diff --git a/mm/memcontrol.c b/mm/memcontrol.c index aff8c05b2c72..1b11bc13e1aa 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1246,9 +1246,6 @@ int mem_cgroup_scan_tasks(struct mem_cgroup *memcg, break; } } -#ifdef CONFIG_MEMCG_QOS - memcg_print_bad_task(arg, ret); -#endif return ret; } @@ -3747,16 +3744,15 @@ bool memcg_low_priority_scan_tasks(int (*fn)(struct task_struct *, void *), return oc->chosen ? true : false; } -void memcg_print_bad_task(void *arg, int ret) +void memcg_print_bad_task(struct oom_control *oc) { - struct oom_control *oc = arg; struct mem_cgroup *memcg; struct mem_cgroup_extension *memcg_ext; if (!static_branch_likely(&memcg_qos_stat_key)) return; - if (!ret && oc->chosen) { + if (oc->chosen) { memcg = mem_cgroup_from_task(oc->chosen); memcg_ext = to_memcg_ext(memcg); if (memcg_ext->memcg_priority) @@ -3786,6 +3782,13 @@ int sysctl_memcg_qos_handler(struct ctl_table *table, int write, return ret; } + +#else + +void memcg_print_bad_task(struct oom_control *oc) +{ +} + #endif #ifdef CONFIG_NUMA diff --git a/mm/oom_kill.c b/mm/oom_kill.c index bcd08df6d577..4ad05a72bb8c 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -415,9 +415,10 @@ static int oom_evaluate_task(struct task_struct *task, void *arg) */ static void select_bad_process(struct oom_control *oc) { - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); - else { + if (is_memcg_oom(oc)) { + if (!mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; #ifdef CONFIG_MEMCG_QOS @@ -512,9 +513,10 @@ static void dump_tasks(struct oom_control *oc) pr_info("[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name\n"); } - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); - else { + if (is_memcg_oom(oc)) { + if (!mem_cgroup_scan_tasks(oc->memcg, dump_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; rcu_read_lock(); -- 2.25.1

1 0

[PATCH OLK-5.10] config: enable set the max iova mag size to 128
by Zhang Zekun 26 Jun '23

26 Jun '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7ASVH CVE: NA --------------------------------------- iova mag size will be iova_rcache size to 128, to support more concurrency in iova allocation, and can fix the problem dixcribe in bugzilla. Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 730078e475d3..2e4880c485be 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -5947,6 +5947,7 @@ CONFIG_ARM_SMMU_V3_PM=y # CONFIG_QCOM_IOMMU is not set # CONFIG_VIRTIO_IOMMU is not set CONFIG_SMMU_BYPASS_DEV=y +CONFIG_IOVA_MAX_GLOBAL_MAGS=128 # # Remoteproc drivers -- 2.17.1

2 1

[PATCH OLK-5.10] arm64: kernel: disable CNP on LINXICORE9100
by Tong Tiangen 26 Jun '23

26 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F28R CVE: NA -------------------------------- On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when TTBRx.CNP=1 differs from the standard ARM core. This causes issues when tlb entries sharing between CPU cores. Avoid these issues by disabling CNP feature for Hisilicon LINXICORE9100 cores. Signed-off-by: Tong Tiangen <tongtiangen(a)huawei.com> --- Documentation/arm64/silicon-errata.rst | 2 ++ arch/arm64/Kconfig | 11 +++++++++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/cpucaps.h | 1 + arch/arm64/include/asm/cputype.h | 2 ++ arch/arm64/kernel/cpu_errata.c | 14 ++++++++++++++ arch/arm64/kernel/cpufeature.c | 3 +++ 7 files changed, 34 insertions(+) diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index b72fbbfe3fcb..95834bea66a4 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -149,6 +149,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Hisilicon | TSV{110,200} | #1980005 | HISILICON_ERRATUM_1980005 | +----------------+-----------------+-----------------+-----------------------------+ +| Hisilicon | LINXICORE9100 | #162100125 | HISILICON_ERRATUM_162100125 | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 3dcf96f37a3c..75da7a29aa19 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -802,6 +802,17 @@ config HISILICON_ERRATUM_1980005 If unsure, say N. +config HISILICON_ERRATUM_162100125 + bool "Hisilicon erratum 162100125" + default y + help + On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when + TTBRx.CNP=1 differs from the standard ARM core. This causes issues when + tlb entries sharing between CPU cores. Avoid these issues by disabling + CNP support for Hisilicon LINXICORE9100 cores. + + If unsure, say Y. + config QCOM_FALKOR_ERRATUM_1003 bool "Falkor E1003: Incorrect translation due to ASID change" default y diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 5ef45486a594..79fd30bd16e9 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -390,6 +390,7 @@ CONFIG_QCOM_FALKOR_ERRATUM_E1041=y CONFIG_SOCIONEXT_SYNQUACER_PREITS=y CONFIG_HISILICON_ERRATUM_HIP08_RU_PREFETCH=y # CONFIG_HISILICON_HIP08_RU_PREFETCH_DEFAULT_OFF is not set +CONFIG_HISILICON_ERRATUM_162100125=y # end of ARM errata workarounds via the alternatives framework CONFIG_ARM64_4K_PAGES=y diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index 37240e1f553c..b43f8e374114 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -74,6 +74,7 @@ #define ARM64_SPECTRE_BHB 66 #define ARM64_WORKAROUND_1742098 67 #define ARM64_HAS_WFXT 68 +#define ARM64_WORKAROUND_HISILICON_ERRATUM_162100125 69 #define ARM64_NCAPS 80 diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 812781fba3f9..e6b0ec40932d 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -111,6 +111,7 @@ #define HISI_CPU_PART_TSV110 0xD01 #define HISI_CPU_PART_TSV200 0xD02 +#define HISI_CPU_PART_LINXICORE9100 0xD02 #define PHYTIUM_CPU_PART_1500A 0X660 #define PHYTIUM_CPU_PART_2000AHK 0X661 @@ -161,6 +162,7 @@ #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX) #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110) #define MIDR_HISI_TSV200 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV200) +#define MIDR_HISI_LINXICORE9100 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_LINXICORE9100) #define MIDR_FT_1500A MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_1500A) #define MIDR_FT_2000AHK MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000AHK) #define MIDR_FT_2000PLUS MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000PLUS) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 0955af96391b..7f175b3aac15 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -324,6 +324,13 @@ static const struct midr_range cavium_erratum_30115_cpus[] = { }; #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 +static const struct midr_range hisilicon_erratum_162100125_cpus[] = { + MIDR_REV(MIDR_HISI_LINXICORE9100, 0, 0), + {}, +}; +#endif + #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 static const struct arm64_cpu_capabilities qcom_erratum_1003_list[] = { { @@ -519,6 +526,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .cpu_enable = hisilicon_1980005_enable, }, #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 + { + .desc = "Hisilicon erratum 162100125", + .capability = ARM64_WORKAROUND_HISILICON_ERRATUM_162100125, + ERRATA_MIDR_RANGE_LIST(hisilicon_erratum_162100125_cpus), + }, +#endif #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 { .desc = "Qualcomm Technologies Falkor/Kryo erratum 1003", diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3b746db0f40c..57631fa553f6 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1330,6 +1330,9 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) if (is_kdump_kernel()) return false; + if (cpus_have_const_cap(ARM64_WORKAROUND_HISILICON_ERRATUM_162100125)) + return false; + return has_cpuid_feature(entry, scope); } -- 2.25.1

2 1

[PATCH] config: enable set the max iova mag size to 128
by Zhang Zekun 26 Jun '23

26 Jun '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7ASVH CVE: NA --------------------------------------- iova mag size will be iova_rcache size to 128, to support more concurrency in iova allocation, and can fix the problem dixcribe in bugzilla. Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 730078e475d3..2e4880c485be 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -5947,6 +5947,7 @@ CONFIG_ARM_SMMU_V3_PM=y # CONFIG_QCOM_IOMMU is not set # CONFIG_VIRTIO_IOMMU is not set CONFIG_SMMU_BYPASS_DEV=y +CONFIG_IOVA_MAX_GLOBAL_MAGS=128 # # Remoteproc drivers -- 2.17.1

1 0

[PATCH OLK-5.10] iommu/iova: increase the iova_rcache depot max size to 128
by Zhang Zekun 26 Jun '23

26 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ASVH CVE: NA --------------------------------------- In fio test with iodepth=256 with allowd cpus to 0-255, we observe a serve performance decrease. The statistic of cache hit rate are relatively low. Here are some statistics about the iova_cpu_rcahe of all cpus: iova alloc order 0 1 2 3 4 5 ---------------------------------------------------------------------- average cpu_rcache hit rate 0.9941 0.7408 0.8109 0.8854 0.9082 0.8887 Jobs: 12 (f=12): [R(12)][20.0%][r=1091MiB/s][r=279k IOPS][eta 00m:28s] Jobs: 12 (f=12): [R(12)][22.2%][r=1426MiB/s][r=365k IOPS][eta 00m:28s] Jobs: 12 (f=12): [R(12)][25.0%][r=1607MiB/s][r=411k IOPS][eta 00m:27s] Jobs: 12 (f=12): [R(12)][27.8%][r=1501MiB/s][r=384k IOPS][eta 00m:26s] Jobs: 12 (f=12): [R(12)][30.6%][r=1486MiB/s][r=380k IOPS][eta 00m:25s] Jobs: 12 (f=12): [R(12)][33.3%][r=1393MiB/s][r=357k IOPS][eta 00m:24s] Jobs: 12 (f=12): [R(12)][36.1%][r=1550MiB/s][r=397k IOPS][eta 00m:23s] Jobs: 12 (f=12): [R(12)][38.9%][r=1485MiB/s][r=380k IOPS][eta 00m:22s] The under lying hisi sas driver has 16 thread irqs to free iova, but these irq call back function will only free iovas on 16 certain cpus(cpu{0, 16,32...,240}). For example, thread irq which smp affinity is 0-15, will only free iova on cpu 0. However, the driver will alloc iova on all cpus(cpu{0-255}), cpus without free iova in local cpu_rcache need to get free iovas from iova_rcache->depot. The current size of iova_rcache->depot max size is 32, and it seems to be too small for 256 users (16 cpus will put iovas to iova_rcache->depot and 240 cpus will try to get iova from it). Set iova_rcache->depot to 128 can fix the performance issue, and the performance can return to normal. iova alloc order 0 1 2 3 4 5 ---------------------------------------------------------------------- average cpu_rcache hit rate 0.9925 0.9736 0.9789 0.9867 0.9889 0.9906 Jobs: 12 (f=12): [R(12)][12.9%][r=7526MiB/s][r=1927k IOPS][eta 04m:30s] Jobs: 12 (f=12): [R(12)][13.2%][r=7527MiB/s][r=1927k IOPS][eta 04m:29s] Jobs: 12 (f=12): [R(12)][13.5%][r=7529MiB/s][r=1927k IOPS][eta 04m:28s] Jobs: 12 (f=12): [R(12)][13.9%][r=7531MiB/s][r=1928k IOPS][eta 04m:27s] Jobs: 12 (f=12): [R(12)][14.2%][r=7529MiB/s][r=1928k IOPS][eta 04m:26s] Jobs: 12 (f=12): [R(12)][14.5%][r=7528MiB/s][r=1927k IOPS][eta 04m:25s] Jobs: 12 (f=12): [R(12)][14.8%][r=7527MiB/s][r=1927k IOPS][eta 04m:24s] Jobs: 12 (f=12): [R(12)][15.2%][r=7525MiB/s][r=1926k IOPS][eta 04m:23s] Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- drivers/iommu/Kconfig | 10 ++++++++++ include/linux/iova.h | 2 +- 2 files changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index f04a2bde0018..54d4a8cc3876 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -437,5 +437,15 @@ config SMMU_BYPASS_DEV This feature will be replaced by ACPI IORT RMR node, which will be upstreamed in mainline. +config IOVA_MAX_GLOBAL_MAGS + int "Set the max iova global magzines in iova rcache" + range 16 2048 + default "32" + help + Iova rcache global magizine is shared among every cpu. The size of + it can be a bottle neck when lots of cpus are contending to use it. + If you are suffering from the speed of allocing iova with more than + 128 cpus, try to tune this config larger. + endif # IOMMU_SUPPORT diff --git a/include/linux/iova.h b/include/linux/iova.h index dfa51ae49666..3cb469b366d7 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -26,7 +26,7 @@ struct iova_magazine; struct iova_cpu_rcache; #define IOVA_RANGE_CACHE_MAX_SIZE 6 /* log of max cached IOVA range size (in pages) */ -#define MAX_GLOBAL_MAGS 32 /* magazines per bin */ +#define MAX_GLOBAL_MAGS CONFIG_IOVA_MAX_GLOBAL_MAGS /* magazines per bin */ struct iova_rcache { spinlock_t lock; -- 2.17.1

3 2

[PATCH OLK-5.10] media: dm1105: Fix use after free bug in dm1105_remove due to race condition
by Pu Lehui 26 Jun '23

26 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.180 commit e9d64e90a0ada4d00ac6562e351ef10ae7d9b911 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F1RG CVE: CVE-2023-35824 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ] In dm1105_probe, it called dm1105_ir_init and bound &dm1105->ir.work with dm1105_emit_key. When it handles IRQ request with dm1105_irq, it may call schedule_work to start the work. When we call dm1105_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in dm1105_remove CPU0 CPU1 |dm1105_emit_key dm1105_remove | dm1105_ir_exit | rc_unregister_device | rc_free_device | rc_dev_release | kfree(dev); | | | rc_keydown | //use Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> --- drivers/media/pci/dm1105/dm1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index 9dce31d2b525..d2e194a24e7e 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -1178,6 +1178,7 @@ static void dm1105_remove(struct pci_dev *pdev) struct dvb_demux *dvbdemux = &dev->demux; struct dmx_demux *dmx = &dvbdemux->dmx; + cancel_work_sync(&dev->ir.work); dm1105_ir_exit(dev); dmx->close(dmx); dvb_net_release(&dev->dvbnet); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] media: dm1105: Fix use after free bug in dm1105_remove due to race condition
by Yongqiang Liu 26 Jun '23

26 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v4.19.283 commit 722c156c6eab40a6e7dda98dfa66724f9d5aeceb category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDYO CVE: CVE-2023-35824 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ] In dm1105_probe, it called dm1105_ir_init and bound &dm1105->ir.work with dm1105_emit_key. When it handles IRQ request with dm1105_irq, it may call schedule_work to start the work. When we call dm1105_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in dm1105_remove CPU0 CPU1 |dm1105_emit_key dm1105_remove | dm1105_ir_exit | rc_unregister_device | rc_free_device | rc_dev_release | kfree(dev); | | | rc_keydown | //use Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/media/pci/dm1105/dm1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index 1ddb0576fb7b..dc3fc69e4480 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -1188,6 +1188,7 @@ static void dm1105_remove(struct pci_dev *pdev) struct dvb_demux *dvbdemux = &dev->demux; struct dmx_demux *dmx = &dvbdemux->dmx; + cancel_work_sync(&dev->ir.work); dm1105_ir_exit(dev); dmx->close(dmx); dvb_net_release(&dev->dvbnet); -- 2.25.1

1 0

[PATCH v3 OLK-5.10 0/8] Per-memcg swap control
by Liu Shixin 25 Jun '23

25 Jun '23

This series patches add swap control for memory cgroup. Patch[2] add page type in memory.reclaim interface to support reclaim anon pages. Patch[4] add memory.force_swapin interface to support swap back pages proactively. Patch[5] add memory.swap.max interface to limit usage of swap for memory cgroup. Patch[6-7] add memory.swapfile interface to limit available swap device for memory cgroup. v2->v3: Enable memcg swap qos for x86_64 and arm64 by default. v1->v2: Rebase on the latest version and fix merge conflicts. Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default Yosry Ahmed (1): mm: vmpressure: don't count proactive reclaim in vmpressure .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 16 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 31 ++ include/linux/mm.h | 1 + include/linux/swap.h | 17 +- include/linux/swap_slots.h | 2 +- mm/Kconfig | 9 + mm/madvise.c | 19 + mm/memcontrol.c | 425 +++++++++++++++++- mm/swap_slots.c | 151 ++++++- mm/swapfile.c | 102 ++++- mm/vmscan.c | 36 +- 14 files changed, 769 insertions(+), 45 deletions(-) -- 2.25.1

2 9

[PATCH openEuler-1.0-LTS] sched: Fix memory leak for smart grid
by Zhang Changzhong 25 Jun '23

25 Jun '23

From: Hui Tang <tanghui20(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FBJM CVE: NA ---------------------------------------- Free ad->domains_orig[] in 'free_affinity_domains', otherwise the memory will leak. Fixes: 713cfd2684fa ("sched: Introduce smart grid scheduling strategy for cfs") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- kernel/sched/fair.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 2115d79..2e6a37d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5584,7 +5584,9 @@ void free_affinity_domains(struct affinity_domain *ad) for (i = 0; i < ad->dcount; i++) { kfree(ad->domains[i]); + kfree(ad->domains_orig[i]); ad->domains[i] = NULL; + ad->domains_orig[i] = NULL; } ad->dcount = 0; } @@ -5605,7 +5607,7 @@ static int init_affinity_domains_orig(struct affinity_domain *ad) err: for (j = 0; j < i; j++) { kfree(ad->domains_orig[j]); - ad->domains_orig[i] = NULL; + ad->domains_orig[j] = NULL; } return -ENOMEM; } @@ -5671,7 +5673,7 @@ int init_auto_affinity(struct task_group *tg) struct auto_affinity *auto_affi; int ret; - auto_affi = kmalloc(sizeof(*auto_affi), GFP_KERNEL); + auto_affi = kzalloc(sizeof(*auto_affi), GFP_KERNEL); if (!auto_affi) return -ENOMEM; -- 2.9.5

1 0

[PATCH openEuler-1.0-LTS] sched: Delete redundant updates to p->prefer_cpus
by Zhang Changzhong 25 Jun '23

25 Jun '23

From: Hui Tang <tanghui20(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7KV CVE: NA ------------------------------- Delete redundant updates to p->prefer_cpus when smart grid used. Add missed check for p->prefer_cpus when !CONFIG_QOS_SCHED_SMART_GRID. Fixes: 21e5d85e205f ("sched: Fix possible deadlock in tg_set_dynamic_affinity_mode") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> --- kernel/sched/core.c | 11 ----------- kernel/sched/fair.c | 8 ++++++-- 2 files changed, 6 insertions(+), 13 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index c7016a4..67bda87 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6534,9 +6534,6 @@ void sched_move_task(struct task_struct *tsk) DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK; struct rq_flags rf; struct rq *rq; -#ifdef CONFIG_QOS_SCHED_SMART_GRID - struct affinity_domain *ad; -#endif rq = task_rq_lock(tsk, &rf); update_rq_clock(rq); @@ -6557,14 +6554,6 @@ void sched_move_task(struct task_struct *tsk) set_curr_task(rq, tsk); task_rq_unlock(rq, tsk, &rf); - -#ifdef CONFIG_QOS_SCHED_SMART_GRID - if (smart_grid_used()) { - ad = &task_group(tsk)->auto_affinity->ad; - set_prefer_cpus_ptr(tsk, ad->domains[ad->curr_level]); - } -#endif - } static inline struct task_group *css_tg(struct cgroup_subsys_state *css) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 2115d79..a7401df 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5714,17 +5714,21 @@ static void destroy_auto_affinity(struct task_group *tg) static void destroy_auto_affinity(struct task_group *tg) {} #ifdef CONFIG_QOS_SCHED_DYNAMIC_AFFINITY +static inline bool prefer_cpus_valid(struct task_struct *p); + static inline struct cpumask *task_prefer_cpus(struct task_struct *p) { return p->prefer_cpus; } -#endif static inline int dynamic_affinity_mode(struct task_struct *p) { + if (!prefer_cpus_valid(p)) + return -1; + return 0; } - +#endif #endif /************************************************** -- 2.9.5

1 0

[PATCH OLK-5.10 0/1] x86/fpu: KABI_BROKEN_REMOVE "union fpregs_state
by Zheng Zengkai 25 Jun '23

25 Jun '23

5a2451f10550 ("x86/fpu: Avoid kabi change caused by struct fpu") will lead to performance degradation of libmicro pthread_create testcase. Assuming that no 3rd party driver will reach into struct fpu, replace kabi fix macro from KABI_DEPRECATE to KABI_BROKEN_REMOVE for element "union fpregs_state state" of struct fpu. Zheng Zengkai (1): x86/fpu: KABI_BROKEN_REMOVE "union fpregs_state state" from struct fpu arch/x86/include/asm/fpu/types.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) -- 2.20.1

2 2

[PATCH OLK-5.10 0/7] Per-memcg swap control
by Liu Shixin 25 Jun '23

25 Jun '23

This series patches add swap control for memory cgroup. Patch[2] add page type in memory.reclaim interface to support reclaim anon pages. Patch[4] add memory.force_swapin interface to support swap back pages proactively. Patch[5] add memory.swap.max interface to limit usage of swap for memory cgroup. Patch[6-7] add memory.swapfile interface to limit available swap device for memory cgroup. Liu Shixin (6): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache Yosry Ahmed (1): mm: vmpressure: don't count proactive reclaim in vmpressure .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 16 +- include/linux/memcontrol.h | 31 ++ include/linux/mm.h | 1 + include/linux/swap.h | 17 +- include/linux/swap_slots.h | 2 +- mm/Kconfig | 9 + mm/madvise.c | 19 + mm/memcontrol.c | 425 +++++++++++++++++- mm/swap_slots.c | 151 ++++++- mm/swapfile.c | 102 ++++- mm/vmscan.c | 36 +- 12 files changed, 767 insertions(+), 45 deletions(-) -- 2.25.1

1 7

[PATCH v2 OLK-5.10 0/7] Per-memcg swap control
by Liu Shixin 25 Jun '23

25 Jun '23

This series patches add swap control for memory cgroup. Patch[2] add page type in memory.reclaim interface to support reclaim anon pages. Patch[4] add memory.force_swapin interface to support swap back pages proactively. Patch[5] add memory.swap.max interface to limit usage of swap for memory cgroup. Patch[6-7] add memory.swapfile interface to limit available swap device for memory cgroup. v1->v2: Rebase on the latest version and fix merge conflicts. Liu Shixin (6): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache Yosry Ahmed (1): mm: vmpressure: don't count proactive reclaim in vmpressure .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 16 +- include/linux/memcontrol.h | 31 ++ include/linux/mm.h | 1 + include/linux/swap.h | 17 +- include/linux/swap_slots.h | 2 +- mm/Kconfig | 9 + mm/madvise.c | 19 + mm/memcontrol.c | 425 +++++++++++++++++- mm/swap_slots.c | 151 ++++++- mm/swapfile.c | 102 ++++- mm/vmscan.c | 36 +- 12 files changed, 767 insertions(+), 45 deletions(-) -- 2.25.1

2 8

[PATCH OLK-5.10] media: rkvdec: fix use after free bug in rkvdec_remove
by Zhang Xiaoxu 25 Jun '23

25 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.180 commit de19d02d734ef29f5dbd2c12fe810fa960ecd83f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDZ3 CVE: CVE-2023-35829 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 3228cec23b8b29215e18090c6ba635840190993d ] In rkvdec_probe, rkvdec->watchdog_work is bound with rkvdec_watchdog_func. Then rkvdec_vp9_run may be called to start the work. If we remove the module which will call rkvdec_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in rkvdec_remove. CPU0 CPU1 |rkvdec_watchdog_func rkvdec_remove | rkvdec_v4l2_cleanup| v4l2_m2m_release | kfree(m2m_dev); | | | v4l2_m2m_get_curr_priv | m2m_dev->curr_ctx //use Fixes: cd33c830448b ("media: rkvdec: Add the rkvdec driver") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> --- drivers/staging/media/rkvdec/rkvdec.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c index e384ea8d7280..f6a29a707862 100644 --- a/drivers/staging/media/rkvdec/rkvdec.c +++ b/drivers/staging/media/rkvdec/rkvdec.c @@ -1077,6 +1077,8 @@ static int rkvdec_remove(struct platform_device *pdev) { struct rkvdec_dev *rkvdec = platform_get_drvdata(pdev); + cancel_delayed_work_sync(&rkvdec->watchdog_work); + rkvdec_v4l2_cleanup(rkvdec); pm_runtime_disable(&pdev->dev); pm_runtime_dont_use_autosuspend(&pdev->dev); -- 2.31.1

2 1

[PATCH OLK-5.10] mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block
by Wupeng Ma 25 Jun '23

25 Jun '23

From: David Hildenbrand <david(a)redhat.com> mainline inclusion from mainline-v5.11-rc1 commit 8dc4bb58a146655eb057247d7c9d19e73928715b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F3HQ CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- virtio-mem soon wants to use offline_and_remove_memory() memory that exceeds a single Linux memory block (memory_block_size_bytes()). Let's remove that restriction. Let's remember the old state and try to restore that if anything goes wrong. While re-onlining can, in general, fail, it's highly unlikely to happen (usually only when a notifier fails to allocate memory, and these are rather rare). This will be used by virtio-mem to offline+remove memory ranges that are bigger than a single memory block - for example, with a device block size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory block size of 128MB. While we could compress the state into 2 bit, using 8 bit is much easier. This handling is similar, but different to acpi_scan_try_to_offline(): a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG optimization is still relevant - it should only apply to ZONE_NORMAL (where we have no guarantees). If relevant, we can always add it. b) acpi_scan_try_to_offline() simply onlines all memory in case something goes wrong. It doesn't restore previous online type. Let's do that, so we won't overwrite what e.g., user space configured. Reviewed-by: Wei Yang <richard.weiyang(a)linux.alibaba.com> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux(a)gmail.com> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: Oscar Salvador <osalvador(a)suse.de> Cc: Wei Yang <richard.weiyang(a)linux.alibaba.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: David Hildenbrand <david(a)redhat.com> Link: https://lore.kernel.org/r/20201112133815.13332-28-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> Acked-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> --- mm/memory_hotplug.c | 105 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 89 insertions(+), 16 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index d2dd2bfcaac3..203c4eb59557 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1675,39 +1675,112 @@ int remove_memory(int nid, u64 start, u64 size) } EXPORT_SYMBOL_GPL(remove_memory); +static int try_offline_memory_block(struct memory_block *mem, void *arg) +{ + uint8_t online_type = MMOP_ONLINE_KERNEL; + uint8_t **online_types = arg; + struct page *page; + int rc; + + /* + * Sense the online_type via the zone of the memory block. Offlining + * with multiple zones within one memory block will be rejected + * by offlining code ... so we don't care about that. + */ + page = pfn_to_online_page(section_nr_to_pfn(mem->start_section_nr)); + if (page && zone_idx(page_zone(page)) == ZONE_MOVABLE) + online_type = MMOP_ONLINE_MOVABLE; + + rc = device_offline(&mem->dev); + /* + * Default is MMOP_OFFLINE - change it only if offlining succeeded, + * so try_reonline_memory_block() can do the right thing. + */ + if (!rc) + **online_types = online_type; + + (*online_types)++; + /* Ignore if already offline. */ + return rc < 0 ? rc : 0; +} + +static int try_reonline_memory_block(struct memory_block *mem, void *arg) +{ + uint8_t **online_types = arg; + int rc; + + if (**online_types != MMOP_OFFLINE) { + mem->online_type = **online_types; + rc = device_online(&mem->dev); + if (rc < 0) + pr_warn("%s: Failed to re-online memory: %d", + __func__, rc); + } + + /* Continue processing all remaining memory blocks. */ + (*online_types)++; + return 0; +} + /* - * Try to offline and remove a memory block. Might take a long time to - * finish in case memory is still in use. Primarily useful for memory devices - * that logically unplugged all memory (so it's no longer in use) and want to - * offline + remove the memory block. + * Try to offline and remove memory. Might take a long time to finish in case + * memory is still in use. Primarily useful for memory devices that logically + * unplugged all memory (so it's no longer in use) and want to offline + remove + * that memory. */ int offline_and_remove_memory(int nid, u64 start, u64 size) { - struct memory_block *mem; - int rc = -EINVAL; + const unsigned long mb_count = size / memory_block_size_bytes(); + uint8_t *online_types, *tmp; + int rc; if (!IS_ALIGNED(start, memory_block_size_bytes()) || - size != memory_block_size_bytes()) - return rc; + !IS_ALIGNED(size, memory_block_size_bytes()) || !size) + return -EINVAL; + + /* + * We'll remember the old online type of each memory block, so we can + * try to revert whatever we did when offlining one memory block fails + * after offlining some others succeeded. + */ + online_types = kmalloc_array(mb_count, sizeof(*online_types), + GFP_KERNEL); + if (!online_types) + return -ENOMEM; + /* + * Initialize all states to MMOP_OFFLINE, so when we abort processing in + * try_offline_memory_block(), we'll skip all unprocessed blocks in + * try_reonline_memory_block(). + */ + memset(online_types, MMOP_OFFLINE, mb_count); lock_device_hotplug(); - mem = find_memory_block(__pfn_to_section(PFN_DOWN(start))); - if (mem) - rc = device_offline(&mem->dev); - /* Ignore if the device is already offline. */ - if (rc > 0) - rc = 0; + + tmp = online_types; + rc = walk_memory_blocks(start, size, &tmp, try_offline_memory_block); /* - * In case we succeeded to offline the memory block, remove it. + * In case we succeeded to offline all memory, remove it. * This cannot fail as it cannot get onlined in the meantime. */ if (!rc) { rc = try_remove_memory(nid, start, size); - WARN_ON_ONCE(rc); + if (rc) + pr_err("%s: Failed to remove memory: %d", __func__, rc); + } + + /* + * Rollback what we did. While memory onlining might theoretically fail + * (nacked by a notifier), it barely ever happens. + */ + if (rc) { + tmp = online_types; + walk_memory_blocks(start, size, &tmp, + try_reonline_memory_block); } unlock_device_hotplug(); + kfree(online_types); return rc; } EXPORT_SYMBOL_GPL(offline_and_remove_memory); -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP2 0/1] openEuler: introduced OPENEULER_LTS to identify LTS Release
by Xie XiuQi 24 Jun '23

24 Jun '23

In most cases, the out-of-tree module needs to identify the release version of the openEuler for interface adaptation. The existing OPENEULER_VERSION() and OPENEULER_VERSION_CODE() cannot distinguish between LTS versions and innovative versions. Therefore, a new macro OPENEULER_LTS is introduced. Xie XiuQi (1): openEuler: introduced OPENEULER_LTS to identify LTS Release Makefile | 2 ++ 1 file changed, 2 insertions(+) -- 2.20.1

2 2

[PATCH OLK-5.10 0/1] x86/fpu: KABI_BROKEN_REMOVE "union fpregs_state
by Zheng Zengkai 24 Jun '23

24 Jun '23

5a2451f10550 ("x86/fpu: Avoid kabi change caused by struct fpu") will lead to performance degradation of libmicro pthread_create testcase, replace kabi fix macro from KABI_DEPRECATE to KABI_BROKEN_REMOVE for element "union fpregs_state state" of struct fpu. Zheng Zengkai (1): x86/fpu: KABI_BROKEN_REMOVE "union fpregs_state state" from struct fpu arch/x86/include/asm/fpu/types.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.20.1

2 2

[PATCH OLK-5.10] sched/rt: Fix possible warn when push_rt_task
by Hui Tang 24 Jun '23

24 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FJB5 ------------------------------- A warn may be triggered during reboot, as follows: reboot ->kernel_restart ->machine_restart ->smp_send_stop --- ipi handler set_cpu_online(cpu, false) balance_callback -> __balance_callback ->push_rt_task -> find_lock_lowest_rq --- offline cpu in vec->mask not be cleared -> find_lowest_rq -> cpupri_find -> cpupri_find_fitness -> __cpupri_find [cpumask_and(..., vec->mask)] -> set_task_cpu(next_task, lowest_rq->cpu) --- WARN_ON(!oneline(cpu) So add !cpu_online(lowest_rq->cpu) check before set_task_cpu(). The fix does not completely fix the problem, since cpu_online_mask may be cleared after check. Fixes: 4ff9083b8a9a8 ("sched/core: WARN() when migrating to an offline CPU") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> --- kernel/sched/rt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 0f349d8d076d..ca868c04ff24 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -1941,6 +1941,9 @@ static int push_rt_task(struct rq *rq) goto retry; } + if (unlikely(!cpu_online(lowest_rq->cpu))) + goto out; + deactivate_task(rq, next_task, 0); set_task_cpu(next_task, lowest_rq->cpu); activate_task(lowest_rq, next_task, 0); -- 2.17.1

2 1

[PATCH OLK-5.10] sched/rt: Fix possible warn when push_rt_task
by Hui Tang 24 Jun '23

24 Jun '23

Offering: HULK hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FJB5 ------------------------------- A warn may be triggered during reboot, as follows: reboot ->kernel_restart ->machine_restart ->smp_send_stop --- ipi handler set_cpu_online(cpu, false) balance_callback -> __balance_callback ->push_rt_task -> find_lock_lowest_rq --- offline cpu in vec->mask not be cleared -> find_lowest_rq -> cpupri_find -> cpupri_find_fitness -> __cpupri_find [cpumask_and(..., vec->mask)] -> set_task_cpu(next_task, lowest_rq->cpu) --- WARN_ON(!oneline(cpu) So add !cpu_online(lowest_rq->cpu) check before set_task_cpu(). The fix does not completely fix the problem, since cpu_online_mask may be cleared after check. Fixes: 4ff9083b8a9a8 ("sched/core: WARN() when migrating to an offline CPU") Signed-off-by: Hui Tang <tanghui20(a)huawei.com> --- kernel/sched/rt.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 0f349d8d076d..ca868c04ff24 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -1941,6 +1941,9 @@ static int push_rt_task(struct rq *rq) goto retry; } + if (unlikely(!cpu_online(lowest_rq->cpu))) + goto out; + deactivate_task(rq, next_task, 0); set_task_cpu(next_task, lowest_rq->cpu); activate_task(lowest_rq, next_task, 0); -- 2.17.1

2 1

[PATCH OLK-5.10 0/3] dm: requeue IO if mapping table not yet
by Li Lingfeng 24 Jun '23

24 Jun '23

It's not proper to just abort IO when the map is not ready. So revert this and requeue IO to keep consistent with the community. And fix the deadlock introduced by the patch. Li Lingfeng (2): Revert "dm: make sure dm_table is binded before queue request" dm: don't lock fs when the map is NULL during suspend or resume Mike Snitzer (1): dm: requeue IO if mapping table not yet available drivers/md/dm-rq.c | 6 ++---- drivers/md/dm.c | 15 +++++++-------- 2 files changed, 9 insertions(+), 12 deletions(-) -- 2.31.1

2 4

[PATCH OLK-5.10] dm thin metadata: check fail_io before using data_sm
by Li Lingfeng 24 Jun '23

24 Jun '23

mainline inclusion from mainline-v6.4-rc8 commit cb65b282c9640c27d3129e2e04b711ce1b352838 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7FITX CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- Must check pmd->fail_io before using pmd->data_sm since pmd->data_sm may be destroyed by other processes. P1(kworker) P2(message) do_worker process_prepared process_prepared_discard_passdown_pt2 dm_pool_dec_data_range pool_message commit dm_pool_commit_metadata ↓ // commit failed metadata_operation_failed abort_transaction dm_pool_abort_metadata __open_or_format_metadata ↓ dm_sm_disk_open ↓ // open failed // pmd->data_sm is NULL dm_sm_dec_blocks ↓ // try to access pmd->data_sm --> UAF As shown above, if dm_pool_commit_metadata() and dm_pool_abort_metadata() fail in pool_message process, kworker may trigger UAF. Fixes: be500ed721a6 ("dm space maps: improve performance with inc/dec on ranges of blocks") Cc: stable(a)vger.kernel.org Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-thin-metadata.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-thin-metadata.c | 30 ++++++++++++++++++------------ 1 file changed, 18 insertions(+), 12 deletions(-) diff --git a/drivers/md/dm-thin-metadata.c b/drivers/md/dm-thin-metadata.c index 85e80fc17641..a3eb430cb7dd 100644 --- a/drivers/md/dm-thin-metadata.c +++ b/drivers/md/dm-thin-metadata.c @@ -1771,13 +1771,15 @@ int dm_thin_remove_range(struct dm_thin_device *td, int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *result) { - int r; + int r = -EINVAL; uint32_t ref_count; down_read(&pmd->root_lock); - r = dm_sm_get_count(pmd->data_sm, b, &ref_count); - if (!r) - *result = (ref_count > 1); + if (!pmd->fail_io) { + r = dm_sm_get_count(pmd->data_sm, b, &ref_count); + if (!r) + *result = (ref_count > 1); + } up_read(&pmd->root_lock); return r; @@ -1785,13 +1787,15 @@ int dm_pool_block_is_shared(struct dm_pool_metadata *pmd, dm_block_t b, bool *re int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e) { - int r = 0; + int r = -EINVAL; pmd_write_lock(pmd); for (; b != e; b++) { - r = dm_sm_inc_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + r = dm_sm_inc_block(pmd->data_sm, b); + if (r) + break; + } } pmd_write_unlock(pmd); @@ -1800,13 +1804,15 @@ int dm_pool_inc_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_ int dm_pool_dec_data_range(struct dm_pool_metadata *pmd, dm_block_t b, dm_block_t e) { - int r = 0; + int r = -EINVAL; pmd_write_lock(pmd); for (; b != e; b++) { - r = dm_sm_dec_block(pmd->data_sm, b); - if (r) - break; + if (!pmd->fail_io) { + r = dm_sm_dec_block(pmd->data_sm, b); + if (r) + break; + } } pmd_write_unlock(pmd); -- 2.31.1

2 1

[OLK-5.10 0/3] dm: requeue IO if mapping table not yet
by Li Lingfeng 24 Jun '23

24 Jun '23

It's not proper to just abort IO when the map is not ready. So revert this and requeue IO to keep consistent with the community. And fix the deadlock introduced by the patch. Li Lingfeng (2): Revert "dm: make sure dm_table is binded before queue request" dm: don't lock fs when the map is NULL during suspend or resume Mike Snitzer (1): dm: requeue IO if mapping table not yet available drivers/md/dm-rq.c | 6 ++---- drivers/md/dm.c | 15 +++++++-------- 2 files changed, 9 insertions(+), 12 deletions(-) -- 2.31.1

1 3

[PATCH openEuler-1.0-LTS 1/2] nbd: validate the block size in nbd_set_size
by Yongqiang Liu 21 Jun '23

21 Jun '23

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v5.1-rc1 commit dcbddf541f18e367ac9cdad8e223d382cd303161 category: bugfix bugzilla: 188268, https://gitee.com/openeuler/kernel/issues/I6DC67 CVE: NA ---------------------------------------- Move the validation of the block from the callers into nbd_set_size. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Josef Bacik <josef(a)toxicpanda.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflict: drivers/block/nbd.c Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Reviewed-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/block/nbd.c | 46 +++++++++++++++++---------------------------- 1 file changed, 17 insertions(+), 29 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index a08f35946718..41bafd5094c3 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -298,16 +298,21 @@ static void nbd_size_clear(struct nbd_device *nbd) } } -static void nbd_set_size(struct nbd_device *nbd, loff_t bytesize, +static int nbd_set_size(struct nbd_device *nbd, loff_t bytesize, loff_t blksize) { struct block_device *bdev; + if (!blksize) + blksize = NBD_DEF_BLKSIZE; + if (blksize < 512 || blksize > PAGE_SIZE || !is_power_of_2(blksize)) + return -EINVAL; + nbd->config->bytesize = bytesize; nbd->config->blksize = blksize; if (!nbd->pid) - return; + return 0; if (nbd->config->flags & NBD_FLAG_SEND_TRIM) { nbd->disk->queue->limits.discard_granularity = blksize; @@ -327,6 +332,7 @@ static void nbd_set_size(struct nbd_device *nbd, loff_t bytesize, bdput(bdev); } kobject_uevent(&nbd_to_dev(nbd)->kobj, KOBJ_CHANGE); + return 0; } static void nbd_complete_rq(struct request *req) @@ -1329,8 +1335,7 @@ static int nbd_start_device(struct nbd_device *nbd) args->index = i; queue_work(nbd->recv_workq, &args->work); } - nbd_set_size(nbd, config->bytesize, config->blksize); - return error; + return nbd_set_size(nbd, config->bytesize, config->blksize); } static int nbd_start_device_ioctl(struct nbd_device *nbd, struct block_device *bdev) @@ -1377,14 +1382,6 @@ static void nbd_clear_sock_ioctl(struct nbd_device *nbd, nbd_config_put(nbd); } -static bool nbd_is_valid_blksize(unsigned long blksize) -{ - if (!blksize || !is_power_of_2(blksize) || blksize < 512 || - blksize > PAGE_SIZE) - return false; - return true; -} - /* Must be called with config_lock held */ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, unsigned int cmd, unsigned long arg) @@ -1401,20 +1398,13 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, case NBD_SET_SOCK: return nbd_add_socket(nbd, arg, false); case NBD_SET_BLKSIZE: - if (!arg) - arg = NBD_DEF_BLKSIZE; - if (!nbd_is_valid_blksize(arg)) - return -EINVAL; - nbd_set_size(nbd, config->bytesize, arg); - return 0; + return nbd_set_size(nbd, config->bytesize, arg); case NBD_SET_SIZE: - nbd_set_size(nbd, arg, config->blksize); - return 0; + return nbd_set_size(nbd, arg, config->blksize); case NBD_SET_SIZE_BLOCKS: if (check_mul_overflow((loff_t)arg, config->blksize, &bytesize)) return -EINVAL; - nbd_set_size(nbd, bytesize, config->blksize); - return 0; + return nbd_set_size(nbd, bytesize, config->blksize); case NBD_SET_TIMEOUT: if (arg) { nbd->tag_set.timeout = arg * HZ; @@ -1946,18 +1936,16 @@ static int nbd_genl_connect(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NBD_ATTR_SIZE_BYTES]) { u64 bytes = nla_get_u64(info->attrs[NBD_ATTR_SIZE_BYTES]); - nbd_set_size(nbd, bytes, config->blksize); + ret = nbd_set_size(nbd, bytes, config->blksize); + if (ret) + goto out; } if (info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]) { u64 bsize = nla_get_u64(info->attrs[NBD_ATTR_BLOCK_SIZE_BYTES]); - if (!bsize) - bsize = NBD_DEF_BLKSIZE; - if (!nbd_is_valid_blksize(bsize)) { - ret = -EINVAL; + ret = nbd_set_size(nbd, config->bytesize, bsize); + if (ret) goto out; - } - nbd_set_size(nbd, config->bytesize, bsize); } if (info->attrs[NBD_ATTR_TIMEOUT]) { u64 timeout = nla_get_u64(info->attrs[NBD_ATTR_TIMEOUT]); -- 2.25.1

1 1

[PATCH] mm/memory_hotplug: extend offline_and_remove_memory() to handle more than one memory block
by Wupeng Ma 21 Jun '23

21 Jun '23

From: David Hildenbrand <david(a)redhat.com> mainline inclusion from mainline-v5.11-rc1 commit 8dc4bb58a146655eb057247d7c9d19e73928715b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F3HQ CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- virtio-mem soon wants to use offline_and_remove_memory() memory that exceeds a single Linux memory block (memory_block_size_bytes()). Let's remove that restriction. Let's remember the old state and try to restore that if anything goes wrong. While re-onlining can, in general, fail, it's highly unlikely to happen (usually only when a notifier fails to allocate memory, and these are rather rare). This will be used by virtio-mem to offline+remove memory ranges that are bigger than a single memory block - for example, with a device block size of 1 GiB (e.g., gigantic pages in the hypervisor) and a Linux memory block size of 128MB. While we could compress the state into 2 bit, using 8 bit is much easier. This handling is similar, but different to acpi_scan_try_to_offline(): a) We don't try to offline twice. I am not sure if this CONFIG_MEMCG optimization is still relevant - it should only apply to ZONE_NORMAL (where we have no guarantees). If relevant, we can always add it. b) acpi_scan_try_to_offline() simply onlines all memory in case something goes wrong. It doesn't restore previous online type. Let's do that, so we won't overwrite what e.g., user space configured. Reviewed-by: Wei Yang <richard.weiyang(a)linux.alibaba.com> Cc: "Michael S. Tsirkin" <mst(a)redhat.com> Cc: Jason Wang <jasowang(a)redhat.com> Cc: Pankaj Gupta <pankaj.gupta.linux(a)gmail.com> Cc: Michal Hocko <mhocko(a)kernel.org> Cc: Oscar Salvador <osalvador(a)suse.de> Cc: Wei Yang <richard.weiyang(a)linux.alibaba.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: David Hildenbrand <david(a)redhat.com> Link: https://lore.kernel.org/r/20201112133815.13332-28-david@redhat.com Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> Acked-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> --- mm/memory_hotplug.c | 105 +++++++++++++++++++++++++++++++++++++------- 1 file changed, 89 insertions(+), 16 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index d2dd2bfcaac3..203c4eb59557 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1675,39 +1675,112 @@ int remove_memory(int nid, u64 start, u64 size) } EXPORT_SYMBOL_GPL(remove_memory); +static int try_offline_memory_block(struct memory_block *mem, void *arg) +{ + uint8_t online_type = MMOP_ONLINE_KERNEL; + uint8_t **online_types = arg; + struct page *page; + int rc; + + /* + * Sense the online_type via the zone of the memory block. Offlining + * with multiple zones within one memory block will be rejected + * by offlining code ... so we don't care about that. + */ + page = pfn_to_online_page(section_nr_to_pfn(mem->start_section_nr)); + if (page && zone_idx(page_zone(page)) == ZONE_MOVABLE) + online_type = MMOP_ONLINE_MOVABLE; + + rc = device_offline(&mem->dev); + /* + * Default is MMOP_OFFLINE - change it only if offlining succeeded, + * so try_reonline_memory_block() can do the right thing. + */ + if (!rc) + **online_types = online_type; + + (*online_types)++; + /* Ignore if already offline. */ + return rc < 0 ? rc : 0; +} + +static int try_reonline_memory_block(struct memory_block *mem, void *arg) +{ + uint8_t **online_types = arg; + int rc; + + if (**online_types != MMOP_OFFLINE) { + mem->online_type = **online_types; + rc = device_online(&mem->dev); + if (rc < 0) + pr_warn("%s: Failed to re-online memory: %d", + __func__, rc); + } + + /* Continue processing all remaining memory blocks. */ + (*online_types)++; + return 0; +} + /* - * Try to offline and remove a memory block. Might take a long time to - * finish in case memory is still in use. Primarily useful for memory devices - * that logically unplugged all memory (so it's no longer in use) and want to - * offline + remove the memory block. + * Try to offline and remove memory. Might take a long time to finish in case + * memory is still in use. Primarily useful for memory devices that logically + * unplugged all memory (so it's no longer in use) and want to offline + remove + * that memory. */ int offline_and_remove_memory(int nid, u64 start, u64 size) { - struct memory_block *mem; - int rc = -EINVAL; + const unsigned long mb_count = size / memory_block_size_bytes(); + uint8_t *online_types, *tmp; + int rc; if (!IS_ALIGNED(start, memory_block_size_bytes()) || - size != memory_block_size_bytes()) - return rc; + !IS_ALIGNED(size, memory_block_size_bytes()) || !size) + return -EINVAL; + + /* + * We'll remember the old online type of each memory block, so we can + * try to revert whatever we did when offlining one memory block fails + * after offlining some others succeeded. + */ + online_types = kmalloc_array(mb_count, sizeof(*online_types), + GFP_KERNEL); + if (!online_types) + return -ENOMEM; + /* + * Initialize all states to MMOP_OFFLINE, so when we abort processing in + * try_offline_memory_block(), we'll skip all unprocessed blocks in + * try_reonline_memory_block(). + */ + memset(online_types, MMOP_OFFLINE, mb_count); lock_device_hotplug(); - mem = find_memory_block(__pfn_to_section(PFN_DOWN(start))); - if (mem) - rc = device_offline(&mem->dev); - /* Ignore if the device is already offline. */ - if (rc > 0) - rc = 0; + + tmp = online_types; + rc = walk_memory_blocks(start, size, &tmp, try_offline_memory_block); /* - * In case we succeeded to offline the memory block, remove it. + * In case we succeeded to offline all memory, remove it. * This cannot fail as it cannot get onlined in the meantime. */ if (!rc) { rc = try_remove_memory(nid, start, size); - WARN_ON_ONCE(rc); + if (rc) + pr_err("%s: Failed to remove memory: %d", __func__, rc); + } + + /* + * Rollback what we did. While memory onlining might theoretically fail + * (nacked by a notifier), it barely ever happens. + */ + if (rc) { + tmp = online_types; + walk_memory_blocks(start, size, &tmp, + try_reonline_memory_block); } unlock_device_hotplug(); + kfree(online_types); return rc; } EXPORT_SYMBOL_GPL(offline_and_remove_memory); -- 2.25.1

1 0

[PATCH OLK-5.10] iommu/iova: increase the iova_rcache depot max size to 128
by Zhang Zekun 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ASVH CVE: NA --------------------------------------- In fio test with iodepth=256 with allowd cpus to 0-255, we observe a serve performance decrease. The statistic of cache hit rate are relatively low. Here are some statistics about the iova_cpu_rcahe of all cpus: iova alloc order 0 1 2 3 4 5 ---------------------------------------------------------------------- average cpu_rcache hit rate 0.9941 0.7408 0.8109 0.8854 0.9082 0.8887 Jobs: 12 (f=12): [R(12)][20.0%][r=1091MiB/s][r=279k IOPS][eta 00m:28s] Jobs: 12 (f=12): [R(12)][22.2%][r=1426MiB/s][r=365k IOPS][eta 00m:28s] Jobs: 12 (f=12): [R(12)][25.0%][r=1607MiB/s][r=411k IOPS][eta 00m:27s] Jobs: 12 (f=12): [R(12)][27.8%][r=1501MiB/s][r=384k IOPS][eta 00m:26s] Jobs: 12 (f=12): [R(12)][30.6%][r=1486MiB/s][r=380k IOPS][eta 00m:25s] Jobs: 12 (f=12): [R(12)][33.3%][r=1393MiB/s][r=357k IOPS][eta 00m:24s] Jobs: 12 (f=12): [R(12)][36.1%][r=1550MiB/s][r=397k IOPS][eta 00m:23s] Jobs: 12 (f=12): [R(12)][38.9%][r=1485MiB/s][r=380k IOPS][eta 00m:22s] The under lying hisi sas driver has 16 thread irqs to free iova, but these irq call back function will only free iovas on 16 certain cpus(cpu{0, 16,32...,240}). For example, thread irq which smp affinity is 0-15, will only free iova on cpu 0. However, the driver will alloc iova on all cpus(cpu{0-255}), cpus without free iova in local cpu_rcache need to get free iovas from iova_rcache->depot. The current size of iova_rcache->depot max size is 32, and it seems to be too small for 256 users (16 cpus will put iovas to iova_rcache->depot and 240 cpus will try to get iova from it). Set iova_rcache->depot to 128 can fix the performance issue, and the performance can return to normal. iova alloc order 0 1 2 3 4 5 ---------------------------------------------------------------------- average cpu_rcache hit rate 0.9925 0.9736 0.9789 0.9867 0.9889 0.9906 Jobs: 12 (f=12): [R(12)][12.9%][r=7526MiB/s][r=1927k IOPS][eta 04m:30s] Jobs: 12 (f=12): [R(12)][13.2%][r=7527MiB/s][r=1927k IOPS][eta 04m:29s] Jobs: 12 (f=12): [R(12)][13.5%][r=7529MiB/s][r=1927k IOPS][eta 04m:28s] Jobs: 12 (f=12): [R(12)][13.9%][r=7531MiB/s][r=1928k IOPS][eta 04m:27s] Jobs: 12 (f=12): [R(12)][14.2%][r=7529MiB/s][r=1928k IOPS][eta 04m:26s] Jobs: 12 (f=12): [R(12)][14.5%][r=7528MiB/s][r=1927k IOPS][eta 04m:25s] Jobs: 12 (f=12): [R(12)][14.8%][r=7527MiB/s][r=1927k IOPS][eta 04m:24s] Jobs: 12 (f=12): [R(12)][15.2%][r=7525MiB/s][r=1926k IOPS][eta 04m:23s] Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- include/linux/iova.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iova.h b/include/linux/iova.h index dfa51ae49666..5f7029f3d0f2 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -26,7 +26,7 @@ struct iova_magazine; struct iova_cpu_rcache; #define IOVA_RANGE_CACHE_MAX_SIZE 6 /* log of max cached IOVA range size (in pages) */ -#define MAX_GLOBAL_MAGS 32 /* magazines per bin */ +#define MAX_GLOBAL_MAGS 128 /* magazines per bin */ struct iova_rcache { spinlock_t lock; -- 2.17.1

2 1

[PATCH v2 openEuler-22.03-LTS-SP2] arm64: kernel: disable CNP on LINXICORE9100
by Tong Tiangen 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F28R CVE: NA -------------------------------- On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when TTBRx.CNP=1 differs from the standard ARM core. This causes issues when tlb entries sharing between CPU cores. Avoid these issues by disabling CNP feature for Hisilicon LINXICORE9100 cores. Signed-off-by: Tong Tiangen <tongtiangen(a)huawei.com> --- Documentation/arm64/silicon-errata.rst | 2 ++ arch/arm64/Kconfig | 11 +++++++++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/cpucaps.h | 1 + arch/arm64/include/asm/cputype.h | 2 ++ arch/arm64/kernel/cpu_errata.c | 14 ++++++++++++++ arch/arm64/kernel/cpufeature.c | 3 +++ 7 files changed, 34 insertions(+) diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 2305def38396..41728b336105 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -151,6 +151,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Hisilicon | Hip09 | #162100801 | HISILICON_ERRATUM_162100801 | +----------------+-----------------+-----------------+-----------------------------+ +| Hisilicon | LINXICORE9100 | #162100125 | HISILICON_ERRATUM_162100125 | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e0143a3a9937..9a238d088245 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -812,6 +812,17 @@ config HISILICON_ERRATUM_162100801 If unsure, say Y. +config HISILICON_ERRATUM_162100125 + bool "Hisilicon erratum 162100125" + default y + help + On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when + TTBRx.CNP=1 differs from the standard ARM core. This causes issues when + tlb entries sharing between CPU cores. Avoid these issues by disabling + CNP support for Hisilicon LINXICORE9100 cores. + + If unsure, say Y. + config QCOM_FALKOR_ERRATUM_1003 bool "Falkor E1003: Incorrect translation due to ASID change" default y diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 49e6d4734c59..eb4ee0522446 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -391,6 +391,7 @@ CONFIG_SOCIONEXT_SYNQUACER_PREITS=y CONFIG_HISILICON_ERRATUM_HIP08_RU_PREFETCH=y # CONFIG_HISILICON_HIP08_RU_PREFETCH_DEFAULT_OFF is not set CONFIG_HISILICON_ERRATUM_162100801=y +CONFIG_HISILICON_ERRATUM_162100125=y # end of ARM errata workarounds via the alternatives framework CONFIG_ARM64_4K_PAGES=y diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index 37240e1f553c..b43f8e374114 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -74,6 +74,7 @@ #define ARM64_SPECTRE_BHB 66 #define ARM64_WORKAROUND_1742098 67 #define ARM64_HAS_WFXT 68 +#define ARM64_WORKAROUND_HISILICON_ERRATUM_162100125 69 #define ARM64_NCAPS 80 diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 812781fba3f9..e6b0ec40932d 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -111,6 +111,7 @@ #define HISI_CPU_PART_TSV110 0xD01 #define HISI_CPU_PART_TSV200 0xD02 +#define HISI_CPU_PART_LINXICORE9100 0xD02 #define PHYTIUM_CPU_PART_1500A 0X660 #define PHYTIUM_CPU_PART_2000AHK 0X661 @@ -161,6 +162,7 @@ #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX) #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110) #define MIDR_HISI_TSV200 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV200) +#define MIDR_HISI_LINXICORE9100 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_LINXICORE9100) #define MIDR_FT_1500A MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_1500A) #define MIDR_FT_2000AHK MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000AHK) #define MIDR_FT_2000PLUS MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000PLUS) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 0955af96391b..7f175b3aac15 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -324,6 +324,13 @@ static const struct midr_range cavium_erratum_30115_cpus[] = { }; #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 +static const struct midr_range hisilicon_erratum_162100125_cpus[] = { + MIDR_REV(MIDR_HISI_LINXICORE9100, 0, 0), + {}, +}; +#endif + #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 static const struct arm64_cpu_capabilities qcom_erratum_1003_list[] = { { @@ -519,6 +526,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .cpu_enable = hisilicon_1980005_enable, }, #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 + { + .desc = "Hisilicon erratum 162100125", + .capability = ARM64_WORKAROUND_HISILICON_ERRATUM_162100125, + ERRATA_MIDR_RANGE_LIST(hisilicon_erratum_162100125_cpus), + }, +#endif #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 { .desc = "Qualcomm Technologies Falkor/Kryo erratum 1003", diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3b746db0f40c..57631fa553f6 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1330,6 +1330,9 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) if (is_kdump_kernel()) return false; + if (cpus_have_const_cap(ARM64_WORKAROUND_HISILICON_ERRATUM_162100125)) + return false; + return has_cpuid_feature(entry, scope); } -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS 1/3] net/sched: flower: fix possible OOB write in fl_set_geneve_opt()
by Yongqiang Liu 21 Jun '23

21 Jun '23

From: Hangyu Hua <hbh25y(a)gmail.com> stable inclusion from stable-v4.19.285 commit 59a27414bb00e48c4153a8b794fb4e69910a6a1b category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7E6ML CVE: CVE-2023-35788 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 4d56304e5827c8cc8cc18c75343d283af7c4825c ] If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total size is 252 bytes(key->enc_opts.len = 252) then key->enc_opts.len = opt->length = data_len / 4 = 0 when the third TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This bypasses the next bounds check and results in an out-of-bounds. Fixes: 0a6e77784f49 ("net/sched: allow flower to match tunnel options") Signed-off-by: Hangyu Hua <hbh25y(a)gmail.com> Reviewed-by: Simon Horman <simon.horman(a)corigine.com> Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren(a)amd.com> Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- net/sched/cls_flower.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/sched/cls_flower.c b/net/sched/cls_flower.c index bd27251ba953..fff54fa798d5 100644 --- a/net/sched/cls_flower.c +++ b/net/sched/cls_flower.c @@ -634,6 +634,9 @@ static int fl_set_geneve_opt(const struct nlattr *nla, struct fl_flow_key *key, if (option_len > sizeof(struct geneve_opt)) data_len = option_len - sizeof(struct geneve_opt); + if (key->enc_opts.len > FLOW_DIS_TUN_OPTS_MAX - 4) + return -ERANGE; + opt = (struct geneve_opt *)&key->enc_opts.data[key->enc_opts.len]; memset(opt, 0xff, option_len); opt->length = data_len / 4; -- 2.25.1

1 2

[PATCH OLK-5.10] block: don't set GD_NEED_PART_SCAN if scan partition failed
by Li Lingfeng 21 Jun '23

21 Jun '23

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v6.3-rc6~9^2 commit 3723091ea1884d599cc8b8bf719d6f42e8d4d8b1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7F7J3 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently if disk_scan_partitions() failed, GD_NEED_PART_SCAN will still set, and partition scan will be proceed again when blkdev_get_by_dev() is called. However, this will cause a problem that re-assemble partitioned raid device will creat partition for underlying disk. Test procedure: mdadm -CR /dev/md0 -l 1 -n 2 /dev/sda /dev/sdb -e 1.0 sgdisk -n 0:0:+100MiB /dev/md0 blockdev --rereadpt /dev/sda blockdev --rereadpt /dev/sdb mdadm -S /dev/md0 mdadm -A /dev/md0 /dev/sda /dev/sdb Test result: underlying disk partition and raid partition can be observed at the same time Note that this can still happen in come corner cases that GD_NEED_PART_SCAN can be set for underlying disk while re-assemble raid device. Fixes: e5cfefa97bcc ("block: fix scan partition for exclusively open device again") Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/genhd.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- block/genhd.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/block/genhd.c b/block/genhd.c index 3c34dd011585..83f407e1563a 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -770,6 +770,13 @@ int disk_scan_partitions(struct gendisk *disk, fmode_t mode) else blkdev_put(bdev, mode & ~FMODE_EXCL); + /* + * If blkdev_get_by_dev() failed early, GD_NEED_PART_SCAN is still set, + * and this will cause that re-assemble partitioned raid device will + * creat partition for underlying disk. + */ + clear_bit(GD_NEED_PART_SCAN, &disk->state); + if (!(mode & FMODE_EXCL)) { bd_abort_claiming(claim, claim, disk_scan_partitions); bdput(claim); -- 2.31.1

2 1

[PATCH openEuler-22.03-LTS-SP2] arm64: kernel: disable CNP on LINXICORE9100
by Tong Tiangen 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F28R CVE: NA -------------------------------- On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when TTBRx.CNP=1 differs from the standard ARM core. This causes issues when tlb entries sharing between CPU cores. Avoid these issues by disabling CNP feature for Hisilicon LINXICORE9100 cores. Signed-off-by: Tong Tiangen <tongtiangen(a)huawei.com> --- Documentation/arm64/silicon-errata.rst | 2 ++ arch/arm64/Kconfig | 11 +++++++++++ arch/arm64/include/asm/cpucaps.h | 1 + arch/arm64/include/asm/cputype.h | 2 ++ arch/arm64/kernel/cpu_errata.c | 14 ++++++++++++++ arch/arm64/kernel/cpufeature.c | 3 +++ 6 files changed, 33 insertions(+) diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 2305def38396..41728b336105 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -151,6 +151,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | Hisilicon | Hip09 | #162100801 | HISILICON_ERRATUM_162100801 | +----------------+-----------------+-----------------+-----------------------------+ +| Hisilicon | LINXICORE9100 | #162100125 | HISILICON_ERRATUM_162100125 | ++----------------+-----------------+-----------------+-----------------------------+ +----------------+-----------------+-----------------+-----------------------------+ | Qualcomm Tech. | Kryo/Falkor v1 | E1003 | QCOM_FALKOR_ERRATUM_1003 | +----------------+-----------------+-----------------+-----------------------------+ diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index e0143a3a9937..9a238d088245 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -812,6 +812,17 @@ config HISILICON_ERRATUM_162100801 If unsure, say Y. +config HISILICON_ERRATUM_162100125 + bool "Hisilicon erratum 162100125" + default y + help + On Hisilicon LINXICORE9100 cores, sharing tlb entries on two cores when + TTBRx.CNP=1 differs from the standard ARM core. This causes issues when + tlb entries sharing between CPU cores. Avoid these issues by disabling + CNP support for Hisilicon LINXICORE9100 cores. + + If unsure, say Y. + config QCOM_FALKOR_ERRATUM_1003 bool "Falkor E1003: Incorrect translation due to ASID change" default y diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index 37240e1f553c..b43f8e374114 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -74,6 +74,7 @@ #define ARM64_SPECTRE_BHB 66 #define ARM64_WORKAROUND_1742098 67 #define ARM64_HAS_WFXT 68 +#define ARM64_WORKAROUND_HISILICON_ERRATUM_162100125 69 #define ARM64_NCAPS 80 diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 812781fba3f9..e6b0ec40932d 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -111,6 +111,7 @@ #define HISI_CPU_PART_TSV110 0xD01 #define HISI_CPU_PART_TSV200 0xD02 +#define HISI_CPU_PART_LINXICORE9100 0xD02 #define PHYTIUM_CPU_PART_1500A 0X660 #define PHYTIUM_CPU_PART_2000AHK 0X661 @@ -161,6 +162,7 @@ #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX) #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110) #define MIDR_HISI_TSV200 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV200) +#define MIDR_HISI_LINXICORE9100 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_LINXICORE9100) #define MIDR_FT_1500A MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_1500A) #define MIDR_FT_2000AHK MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000AHK) #define MIDR_FT_2000PLUS MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000PLUS) diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 0955af96391b..7f175b3aac15 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -324,6 +324,13 @@ static const struct midr_range cavium_erratum_30115_cpus[] = { }; #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 +static const struct midr_range hisilicon_erratum_162100125_cpus[] = { + MIDR_REV(MIDR_HISI_LINXICORE9100, 0, 0), + {}, +}; +#endif + #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 static const struct arm64_cpu_capabilities qcom_erratum_1003_list[] = { { @@ -519,6 +526,13 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .cpu_enable = hisilicon_1980005_enable, }, #endif +#ifdef CONFIG_HISILICON_ERRATUM_162100125 + { + .desc = "Hisilicon erratum 162100125", + .capability = ARM64_WORKAROUND_HISILICON_ERRATUM_162100125, + ERRATA_MIDR_RANGE_LIST(hisilicon_erratum_162100125_cpus), + }, +#endif #ifdef CONFIG_QCOM_FALKOR_ERRATUM_1003 { .desc = "Qualcomm Technologies Falkor/Kryo erratum 1003", diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3b746db0f40c..57631fa553f6 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1330,6 +1330,9 @@ has_useable_cnp(const struct arm64_cpu_capabilities *entry, int scope) if (is_kdump_kernel()) return false; + if (cpus_have_const_cap(ARM64_WORKAROUND_HISILICON_ERRATUM_162100125)) + return false; + return has_cpuid_feature(entry, scope); } -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP2] kernel: update SP2 OPENEULER_MINOR value to 2
by Jialin Zhang 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I796HQ -------------------------------- The version information OPENEULER_MINOR is not right in SP2, update it's value to 2. Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4778c71a1e75..b36218bd47c2 100644 --- a/Makefile +++ b/Makefile @@ -5,7 +5,7 @@ SUBLEVEL = 0 EXTRAVERSION = NAME = Kleptomaniac Octopus OPENEULER_MAJOR = 2203 -OPENEULER_MINOR = 1 +OPENEULER_MINOR = 2 # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP2] kernel: update SP2 OPENEULER_MINOR value to 2
by Jialin Zhang 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I796HQ -------------------------------- The version information OPENEULER_MINOR is not right in SP2, update it's value to 2. Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index 4778c71a1e75..b36218bd47c2 100644 --- a/Makefile +++ b/Makefile @@ -5,7 +5,7 @@ SUBLEVEL = 0 EXTRAVERSION = NAME = Kleptomaniac Octopus OPENEULER_MAJOR = 2203 -OPENEULER_MINOR = 1 +OPENEULER_MINOR = 2 # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP2 0/3] Revert "locking/rwsem: Prevent
by Zheng Zengkai 21 Jun '23

21 Jun '23

2f06f702925b ("locking/rwsem: Prevent potential lock starvation"): This patch may have some impact on reader performance as it reduces reader optimistic spinning especially if the lock critical sections are short the number of contending readers are small. This patch will lead to 30%+ performance degradation to fio write_iops_blocksize 4KB testcase, and we stress the system with mysql tpcc for 12 hours, no hungtask occur, So revert this patchset temporarily. Zheng Zengkai (3): Revert "locking/rwsem: Prevent potential lock starvation" Revert "locking/rwsem: Pass the current atomic count to rwsem_down_read_slowpath()" Revert "locking/rwsem: Better collate rwsem_read_trylock()" kernel/locking/rwsem.c | 56 ++++++++++++++---------------------------- 1 file changed, 19 insertions(+), 37 deletions(-) -- 2.20.1

2 4

[PATCH openEuler-22.03-LTS-SP2 0/1] uacce: fix the uacce isolattion reference counting error
by Wenkai Lin 21 Jun '23

21 Jun '23

From: JiangShui Yang <yangjiangshui(a)h-partners.com> Due to the process change of the lock, A thread invokes the 'put_queue' twice. The value of uacce reference counting becomes a negative number. The 'fops_open' and 'fops_release' are symmetrical. So move the process of decrement to 'fops_release' from 'put_queue'. Kai Ye (1): uacce: fix the uacce isolattion reference counting error drivers/misc/uacce/uacce.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.30.0

2 2

[PATCH OLK-5.10 0/1] fs/stat: make tmp variable 16-bytes aligned in copy stat
by Yang Yingliang 21 Jun '23

21 Jun '23

The tmp variable is used to copy_to_user(), it has better performance if the address accesseed by ldp instruction is 16 bytes aligned on arm64. The performance of nginx test is improved after this patch: http "Connection: close" 1.11% http "Connection: keep-alive" 2.11% https "Connection: close" 1.56% https "Connection: keep-alive" 0.18% Yang Yingliang (1): fs/stat: make tmp variable 16-bytes aligned in copy stat fs/stat.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) -- 2.25.1

2 2

[PATCH OLK-5.10 0/2] fix memleak with efi_fake_mem
by Wupeng Ma 21 Jun '23

21 Jun '23

From: Ma Wupeng <mawupeng1(a)huawei.com> 1. fix memleak with efi_fake_mem 2. disable efi_fake_mem support by default for arm64 Ma Wupeng (2): efi: Fix UAF for arm64 when enable efi_fake_mem config: Disable EFI_FAKE_MEMMAP support for arm64 by default arch/arm64/configs/openeuler_defconfig | 3 +-- drivers/firmware/efi/fake_mem.c | 13 +++++++++++++ 2 files changed, 14 insertions(+), 2 deletions(-) -- 2.25.1

2 3

[PATCH OLK-5.10 0/3] fix memory reliable related issues
by Wupeng Ma 21 Jun '23

21 Jun '23

From: Ma Wupeng <mawupeng1(a)huawei.com> Fix memory reliable related issues. Ma Wupeng (3): mm: mem_reliable: Fix reliable page counter mismatch problem mm: mem_reliable: Update reliable page counter to zero if underflows efi: Disable mirror feature during crashkernel drivers/firmware/efi/efi.c | 6 ++++++ include/linux/mem_reliable.h | 15 +++++++++++++-- mm/memory.c | 1 + 3 files changed, 20 insertions(+), 2 deletions(-) -- 2.25.1

2 4

[PATCH OLK-5.10] memcg: fix implicit declaration of memcg_print_bad_task()
by Liu Shixin 21 Jun '23

21 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 CVE: NA -------------------------------- Fix implicit declaration of function 'memcg_print_bad_task'. Fixes: 9cd6f55e9c33 ("mm: oom: move memcg_print_bad_task() out of mem_cgroup_scan_tasks()") Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> --- include/linux/memcontrol.h | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 5b8982e95876..e1c24b0056d0 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -420,6 +420,8 @@ bool memcg_low_priority_scan_tasks(int (*)(struct task_struct *, void *), void memcg_print_bad_task(struct oom_control *oc); extern int sysctl_memcg_qos_handler(struct ctl_table *table, int write, void __user *buffer, size_t *length, loff_t *ppos); +#else +void memcg_print_bad_task(struct oom_control *oc); #endif /* @@ -1695,6 +1697,10 @@ unsigned long mem_cgroup_soft_limit_reclaim(pg_data_t *pgdat, int order, { return 0; } + +static inline void memcg_print_bad_task(struct oom_control *oc) +{ +} #endif /* CONFIG_MEMCG */ /* idx can be of type enum memcg_stat_item or node_stat_item */ -- 2.25.1

2 1

[PATCH opwnEuler-22.03-LTS-SP2 0/1] uacce: remove uacce device refcnt
by Wenkai Lin 21 Jun '23

21 Jun '23

From: JiangShui Yang <yangjiangshui(a)h-partners.com> Delete the reference counting so that the isolation policy can be dynamically configured. Wenkai Lin (1): uacce: remove uacce device refcnt drivers/misc/uacce/uacce.c | 5 ----- include/linux/uacce.h | 2 -- 2 files changed, 7 deletions(-) -- 2.30.0

1 1

[PATCH openEuler-22.03-LTS-SP2 0/2] Fix NULL pointer and Keep PERF_PMU_CAP_EXCLUSIVE
by Junhao He 20 Jun '23

20 Jun '23

1) Fix NULL pointer for hisi_ptt 2) Keep to advertise PERF_PMU_CAP_EXCLUSIVE. Such ptt pmus can only have one event scheduled at a time. Junhao He (2): hwtracing: hisi_ptt: Add dummy callback pmu::read() hwtracing: hisi_ptt: Keep to advertise PERF_PMU_CAP_EXCLUSIVE drivers/hwtracing/ptt/hisi_ptt.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) -- 2.33.0

2 3

[PATCH OLK-5.10 0/2] nbd: validate the block size in nbd_set_size
by Zhong Jinghua 20 Jun '23

20 Jun '23

nbd: validate the block size in nbd_set_size Christoph Hellwig (1): nbd: validate the block size in nbd_set_size Zhong Jinghua (1): nbd: fix incomplete validation of ioctl arg drivers/block/nbd.c | 51 ++++++++++++++++++--------------------------- 1 file changed, 20 insertions(+), 31 deletions(-) -- 2.31.1

2 3

[PATCH openEuler-22.03-LTS-SP2 v2 0/2] Fix some warning messages in netacc
by Liu Jian 20 Jun '23

20 Jun '23

v1->v2: add bugzilla tag. Fix below warning messages: libbpf: Error in bpf_create_map_xattr(redissock_map):ERROR: strerror_r(-524)=22(-524). Retrying without BTF. rmmod: ERROR: Module localip is not currently loaded Hengqi Chen (1): libbpf: Support uniform BTF-defined key/value specification across all BPF maps Liu Jian (1): tools: ignore one warning message tools/lib/bpf/libbpf.c | 24 ++++++++++++++++++++++++ tools/netacc/net-acc | 2 +- 2 files changed, 25 insertions(+), 1 deletion(-) -- 2.34.1

2 3

[PATCH openEuler-1.0-LTS 0/5] sched: Some fixes for smart grid
by Zhang Changzhong 20 Jun '23

20 Jun '23

Some fixes for smart gird, as follows: Hui Tang (5): sched: Fix timer storm for smart grid sched: fix dereference NULL pointers sched: Fix memory leak on error branch sched: clear credit count in error branch sched: Adjust few parameters range for smart grid kernel/fork.c | 2 +- kernel/sched/core.c | 32 ++++++++++++++++++++++++++++---- kernel/sched/fair.c | 40 ++++++++++++++++++++-------------------- kernel/sysctl.c | 6 ++++-- 4 files changed, 53 insertions(+), 27 deletions(-) -- 2.9.5

1 5

[OLK-5.10 v2] RDMA/hns: Fix CQ and QP cache affinity
by Chengchang Tang 20 Jun '23

20 Jun '23

driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7DCX0 --------------------------------------------------------------------------- Currently, the affinity between QP cache and CQ cache is not considered when assigning QPN, it will affect the message rate of HW. Allocate QPN from QP cache with better CQ affinity to get better performance. Fixes: c746005b2800 ("RDMA/hns: Create QP with selected QPN for bank load balance") Signed-off-by: Chengchang Tang <tangchengchang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_device.h | 1 + drivers/infiniband/hw/hns/hns_roce_qp.c | 29 ++++++++++++++++----- 2 files changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_device.h b/drivers/infiniband/hw/hns/hns_roce_device.h index 01c16a4d97c5..9694cef03adb 100644 --- a/drivers/infiniband/hw/hns/hns_roce_device.h +++ b/drivers/infiniband/hw/hns/hns_roce_device.h @@ -101,6 +101,7 @@ #define HNS_ROCE_CQ_BANK_NUM 4 #define CQ_BANKID_SHIFT 2 +#define CQ_BANKID_MASK GENMASK(1, 0) enum { SERV_TYPE_RC, diff --git a/drivers/infiniband/hw/hns/hns_roce_qp.c b/drivers/infiniband/hw/hns/hns_roce_qp.c index f64464fbad41..2c11b1a0b0c7 100644 --- a/drivers/infiniband/hw/hns/hns_roce_qp.c +++ b/drivers/infiniband/hw/hns/hns_roce_qp.c @@ -171,14 +171,29 @@ static void hns_roce_ib_qp_event(struct hns_roce_qp *hr_qp, } } -static u8 get_least_load_bankid_for_qp(struct hns_roce_bank *bank) +static u8 get_affinity_cq_bank(u8 qp_bank) { - u32 least_load = bank[0].inuse; + return (qp_bank >> 1) & CQ_BANKID_MASK; +} + +static u8 get_least_load_bankid_for_qp(struct ib_qp_init_attr *init_attr, + struct hns_roce_bank *bank) +{ +#define INVALID_LOAD_QPNUM 0xFFFFFFFF + struct ib_cq *scq = init_attr->send_cq; + u32 least_load = INVALID_LOAD_QPNUM; + unsigned long cqn = 0; u8 bankid = 0; u32 bankcnt; u8 i; - for (i = 1; i < HNS_ROCE_QP_BANK_NUM; i++) { + if (scq) + cqn = to_hr_cq(scq)->cqn; + + for (i = 0; i < HNS_ROCE_QP_BANK_NUM; i++) { + if (scq && (get_affinity_cq_bank(i) != (cqn & CQ_BANKID_MASK))) + continue; + bankcnt = bank[i].inuse; if (bankcnt < least_load) { least_load = bankcnt; @@ -210,7 +225,9 @@ static int alloc_qpn_with_bankid(struct hns_roce_bank *bank, u8 bankid, return 0; } -static int alloc_qpn(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp) + +static int alloc_qpn(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp, + struct ib_qp_init_attr *init_attr) { struct hns_roce_qp_table *qp_table = &hr_dev->qp_table; unsigned long num = 0; @@ -222,7 +239,7 @@ static int alloc_qpn(struct hns_roce_dev *hr_dev, struct hns_roce_qp *hr_qp) hr_qp->doorbell_qpn = 1; } else { mutex_lock(&qp_table->bank_mutex); - bankid = get_least_load_bankid_for_qp(qp_table->bank); + bankid = get_least_load_bankid_for_qp(init_attr, qp_table->bank); ret = alloc_qpn_with_bankid(&qp_table->bank[bankid], bankid, &num); @@ -1218,7 +1235,7 @@ static int hns_roce_create_qp_common(struct hns_roce_dev *hr_dev, } } - ret = alloc_qpn(hr_dev, hr_qp); + ret = alloc_qpn(hr_dev, hr_qp, init_attr); if (ret) { ibdev_err(ibdev, "failed to alloc QPN, ret = %d.\n", ret); goto err_qpn; -- 2.30.0

1 0

[PATCH OLK-5.10] relayfs: fix out-of-bounds access in relay_file_read
by GONG, Ruiqi 20 Jun '23

20 Jun '23

From: Zhang Zhengming <zhang.zhengming(a)h3c.com> stable inclusion from stable-v5.10.180 commit 1b0df44753bf9e45eaf5cee34f87597193f862e8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7E5C1 CVE: CVE-2023-3268 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ---------------------------------------- commit 43ec16f1450f4936025a9bdf1a273affdb9732c1 upstream. There is a crash in relay_file_read, as the var from point to the end of last subbuf. The oops looks something like: pc : __arch_copy_to_user+0x180/0x310 lr : relay_file_read+0x20c/0x2c8 Call trace: __arch_copy_to_user+0x180/0x310 full_proxy_read+0x68/0x98 vfs_read+0xb0/0x1d0 ksys_read+0x6c/0xf0 __arm64_sys_read+0x20/0x28 el0_svc_common.constprop.3+0x84/0x108 do_el0_svc+0x74/0x90 el0_svc+0x1c/0x28 el0_sync_handler+0x88/0xb0 el0_sync+0x148/0x180 We get the condition by analyzing the vmcore: 1). The last produced byte and last consumed byte both at the end of the last subbuf 2). A softirq calls function(e.g __blk_add_trace) to write relay buffer occurs when an program is calling relay_file_read_avail(). relay_file_read relay_file_read_avail relay_file_read_consume(buf, 0, 0); //interrupted by softirq who will write subbuf .... return 1; //read_start point to the end of the last subbuf read_start = relay_file_read_start_pos //avail is equal to subsize avail = relay_file_read_subbuf_avail //from points to an invalid memory address from = buf->start + read_start //system is crashed copy_to_user(buffer, from, avail) Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com Fixes: 8d62fdebdaf9 ("relay file read: start-pos fix") Signed-off-by: Zhang Zhengming <zhang.zhengming(a)h3c.com> Reviewed-by: Zhao Lei <zhao_lei1(a)hoperun.com> Reviewed-by: Zhou Kete <zhou.kete(a)h3c.com> Reviewed-by: Pengcheng Yang <yangpc(a)wangsu.com> Cc: Jens Axboe <axboe(a)kernel.dk> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: GONG, Ruiqi <gongruiqi1(a)huawei.com> --- kernel/relay.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/relay.c b/kernel/relay.c index b08d936d5fa7..9cae6bf2e66a 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1077,7 +1077,8 @@ static size_t relay_file_read_start_pos(struct rchan_buf *buf) size_t subbuf_size = buf->chan->subbuf_size; size_t n_subbufs = buf->chan->n_subbufs; size_t consumed = buf->subbufs_consumed % n_subbufs; - size_t read_pos = consumed * subbuf_size + buf->bytes_consumed; + size_t read_pos = (consumed * subbuf_size + buf->bytes_consumed) + % (n_subbufs * subbuf_size); read_subbuf = read_pos / subbuf_size; padding = buf->padding[read_subbuf]; -- 2.25.1

2 1

[PATCH OLK-5.10 v2] memstick: r592: Fix UAF bug in r592_remove due to race condition
by Chen Zhongjin 20 Jun '23

20 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.4-rc1 commit 63264422785021704c39b38f65a78ab9e4a186d7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7EK74 CVE: CVE-2023-3141 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In r592_probe, dev->detect_timer was bound with r592_detect_timer. In r592_irq function, the timer function will be invoked by mod_timer. If we remove the module which will call hantro_release to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in r592_remove. CPU0 CPU1 |r592_detect_timer r592_remove | memstick_free_host| put_device; | kfree(host); | | | queue_work | &host->media_checker //use Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Chen Zhongjin <chenzhongjin(a)huawei.com> --- drivers/memstick/host/r592.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index eaa2a94d18be..dd06c18495eb 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -828,7 +828,7 @@ static void r592_remove(struct pci_dev *pdev) /* Stop the processing thread. That ensures that we won't take any more requests */ kthread_stop(dev->io_thread); - + del_timer_sync(&dev->detect_timer); r592_enable_device(dev, false); while (!error && dev->req) { -- 2.17.1

2 1