- Kernel - mailweb.openeuler.org

[PATCH 0/5] Adding Huawei BMA driver
by yunaixin03610＠163.com 09 Jul '20

09 Jul '20

From: Naixin Yu <yunaixin(a)huawei.com> This patch set contains 5 communication drivers for Huawei BMA software. The BMA software is a system management software. It supports the status monitoring, performance monitoring, and event monitoring of various components, including server CPUs, memory, hard disks, NICs, IB cards, PCIe cards, RAID controller cards, and optical modules. These 5 drivers are used to send/receive message through PCIe channel in different ways by BMA software. Naixin Yu (5): Huawei BMA: Adding Huawei BMA driver: host_edma_drv Huawei BMA: Adding Huawei BMA driver: host_cdev_drv Huawei BMA: Adding Huawei BMA driver: host_veth_drv Huawei BMA: Adding Huawei BMA driver: cdev_veth_drv Huawei BMA: Adding Huawei BMA driver: host_kbox_drv drivers/net/ethernet/huawei/Kconfig | 1 + drivers/net/ethernet/huawei/Makefile | 1 + drivers/net/ethernet/huawei/bma/Kconfig | 10 + drivers/net/ethernet/huawei/bma/Makefile | 9 + .../net/ethernet/huawei/bma/cdev_drv/Makefile | 2 + .../ethernet/huawei/bma/cdev_drv/bma_cdev.c | 369 +++ .../huawei/bma/cdev_veth_drv/Makefile | 2 + .../bma/cdev_veth_drv/virtual_cdev_eth_net.c | 1862 ++++++++++++ .../bma/cdev_veth_drv/virtual_cdev_eth_net.h | 299 ++ .../net/ethernet/huawei/bma/edma_drv/Makefile | 2 + .../huawei/bma/edma_drv/bma_devintf.c | 597 ++++ .../huawei/bma/edma_drv/bma_devintf.h | 40 + .../huawei/bma/edma_drv/bma_include.h | 116 + .../ethernet/huawei/bma/edma_drv/bma_pci.c | 533 ++++ .../ethernet/huawei/bma/edma_drv/bma_pci.h | 94 + .../ethernet/huawei/bma/edma_drv/edma_host.c | 1462 ++++++++++ .../ethernet/huawei/bma/edma_drv/edma_host.h | 351 +++ .../huawei/bma/include/bma_ker_intf.h | 94 + .../net/ethernet/huawei/bma/kbox_drv/Makefile | 5 + .../ethernet/huawei/bma/kbox_drv/kbox_dump.c | 121 + .../ethernet/huawei/bma/kbox_drv/kbox_dump.h | 33 + .../ethernet/huawei/bma/kbox_drv/kbox_hook.c | 101 + .../ethernet/huawei/bma/kbox_drv/kbox_hook.h | 33 + .../huawei/bma/kbox_drv/kbox_include.h | 40 + .../ethernet/huawei/bma/kbox_drv/kbox_main.c | 168 ++ .../ethernet/huawei/bma/kbox_drv/kbox_main.h | 23 + .../ethernet/huawei/bma/kbox_drv/kbox_mce.c | 264 ++ .../ethernet/huawei/bma/kbox_drv/kbox_mce.h | 23 + .../ethernet/huawei/bma/kbox_drv/kbox_panic.c | 187 ++ .../ethernet/huawei/bma/kbox_drv/kbox_panic.h | 25 + .../huawei/bma/kbox_drv/kbox_printk.c | 363 +++ .../huawei/bma/kbox_drv/kbox_printk.h | 33 + .../huawei/bma/kbox_drv/kbox_ram_drive.c | 188 ++ .../huawei/bma/kbox_drv/kbox_ram_drive.h | 31 + .../huawei/bma/kbox_drv/kbox_ram_image.c | 135 + .../huawei/bma/kbox_drv/kbox_ram_image.h | 84 + .../huawei/bma/kbox_drv/kbox_ram_op.c | 986 +++++++ .../huawei/bma/kbox_drv/kbox_ram_op.h | 77 + .../net/ethernet/huawei/bma/veth_drv/Makefile | 2 + .../ethernet/huawei/bma/veth_drv/veth_hb.c | 2502 +++++++++++++++++ .../ethernet/huawei/bma/veth_drv/veth_hb.h | 440 +++ 41 files changed, 11708 insertions(+) create mode 100644 drivers/net/ethernet/huawei/bma/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_devintf.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_devintf.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_include.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/edma_host.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/edma_host.h create mode 100644 drivers/net/ethernet/huawei/bma/include/bma_ker_intf.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_dump.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_dump.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_hook.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_hook.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_main.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_main.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_mce.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_mce.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_panic.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_panic.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_printk.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_printk.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_drive.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_drive.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_image.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_image.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_op.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_op.h create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h -- 2.26.2.windows.1

1 5

[PATCH] RDMA/hns: Modify the code based on the review comments
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Hu Chunzhi <huchunzhi(a)huawei.com> driver inclusion category: cleanup bugzilla: NA CVE: NA ---------------------------------- This patch modifies the code based on the review comments. Reviewed-by: Zhao Weibo <zhaoweibo3(a)huawei.com> Reviewed-by: Yang Shunfeng <yangshunfeng2(a)huawei.com> Signed-off-by: Hu Chunzhi <huchunzhi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_alloc.c | 3 +-- .../infiniband/hw/hns/hns_roce_hw_sysfs_v2.c | 1 - drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 22 +++++++++++-------- drivers/infiniband/hw/hns/hns_roce_mr.c | 5 ----- 4 files changed, 14 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_alloc.c b/drivers/infiniband/hw/hns/hns_roce_alloc.c index ec8b30b24a3c..89547c8bb82d 100644 --- a/drivers/infiniband/hw/hns/hns_roce_alloc.c +++ b/drivers/infiniband/hw/hns/hns_roce_alloc.c @@ -63,6 +63,7 @@ int hns_roce_bitmap_alloc(struct hns_roce_bitmap *bitmap, unsigned long *obj) return ret; } EXPORT_SYMBOL_GPL(hns_roce_bitmap_alloc); + void hns_roce_bitmap_free(struct hns_roce_bitmap *bitmap, unsigned long obj, int rr) { @@ -214,7 +215,6 @@ int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct, buf->page_shift = page_shift; buf->page_list = kcalloc(buf->nbufs, sizeof(*buf->page_list), GFP_KERNEL); - if (!buf->page_list) return -ENOMEM; @@ -222,7 +222,6 @@ int hns_roce_buf_alloc(struct hns_roce_dev *hr_dev, u32 size, u32 max_direct, buf->page_list[i].buf = dma_zalloc_coherent(dev, page_size, &t, GFP_KERNEL); - if (!buf->page_list[i].buf) goto err_free; diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_sysfs_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_sysfs_v2.c index dfbdfb2192f1..a780a0e10386 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_sysfs_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_sysfs_v2.c @@ -612,7 +612,6 @@ int hns_roce_v2_modify_eq(struct hns_roce_dev *hr_dev, struct hns_roce_eq *eq, roce_set_field(eqc_mask->byte_12, HNS_ROCE_EQC_MAX_CNT_M, HNS_ROCE_EQC_MAX_CNT_S, 0); - } else if (type == HNS_ROCE_EQ_PERIOD_MASK) { roce_set_field(eqc->byte_12, HNS_ROCE_EQC_PERIOD_M, diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index b77fef65ab1c..e7efd37b7734 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -1366,23 +1366,26 @@ static void hns_roce_func_clr_rst_prc(struct hns_roce_dev *hr_dev, int retval, } } -static void hns_roce_query_func_info(struct hns_roce_dev *hr_dev) +static int hns_roce_query_func_info(struct hns_roce_dev *hr_dev) { struct hns_roce_cmq_desc desc; struct hns_roce_pf_func_info *resp; - int ret; + int ret = 0; hns_roce_cmq_setup_basic_desc(&desc, HNS_ROCE_OPC_QUERY_FUNC_INFO, true); ret = hns_roce_cmq_send(hr_dev, &desc, 1); if (ret) { - dev_err(hr_dev->dev, "Query vf count failed(%d).\n", ret); - return; + dev_err(hr_dev->dev, "Query function info failed(%d).\n", + ret); + return ret; } resp = (struct hns_roce_pf_func_info *)desc.data; hr_dev->func_num = le32_to_cpu(resp->pf_own_func_num); hr_dev->mac_id = le32_to_cpu(resp->pf_own_mac_id); + + return ret; } static void hns_roce_clear_func(struct hns_roce_dev *hr_dev, int vf_id) @@ -1438,12 +1441,11 @@ static void hns_roce_clear_func(struct hns_roce_dev *hr_dev, int vf_id) static void hns_roce_function_clear(struct hns_roce_dev *hr_dev) { - int i; int vf_num = 0;/* should be (hr_dev->func_num-1) when enable ROCE VF */ /* Clear vf first, then clear pf */ - for (i = vf_num; i >= 0; i--) - hns_roce_clear_func(hr_dev, i); + for (; vf_num >= 0; vf_num--) + hns_roce_clear_func(hr_dev, vf_num); } static void hns_roce_clear_extdb_list_info(struct hns_roce_dev *hr_dev) @@ -2182,7 +2184,9 @@ static int hns_roce_v2_profile(struct hns_roce_dev *hr_dev) return ret; } - hns_roce_query_func_info(hr_dev); + ret = hns_roce_query_func_info(hr_dev); + if (ret) + return ret; if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08_B) { ret = hns_roce_query_pf_timer_resource(hr_dev); @@ -5488,7 +5492,7 @@ static int hns_roce_v2_destroy_qp_common(struct hns_roce_dev *hr_dev, kfree(hr_qp->sq.wrid); kfree(hr_qp->rq.wrid); hns_roce_buf_free(hr_dev, hr_qp->buff_size, &hr_qp->hr_buf); - if (hr_qp->rq.wqe_cnt) + if (hr_qp->rq.wqe_cnt && (hr_qp->rdb_en == 1)) hns_roce_free_db(hr_dev, &hr_qp->rdb); } diff --git a/drivers/infiniband/hw/hns/hns_roce_mr.c b/drivers/infiniband/hw/hns/hns_roce_mr.c index 0802454b2b96..ce5c0544fc1b 100644 --- a/drivers/infiniband/hw/hns/hns_roce_mr.c +++ b/drivers/infiniband/hw/hns/hns_roce_mr.c @@ -552,7 +552,6 @@ static int hns_roce_mhop_alloc(struct hns_roce_dev *hr_dev, int npages, goto err_kcalloc_l2_dma; } - mr->pbl_size = npages; mr->pbl_ba = mr->pbl_l0_dma_addr; mr->pbl_hop_num = hr_dev->caps.pbl_hop_num; @@ -1289,7 +1288,6 @@ static int rereg_mr_trans(struct ib_mr *ibmr, int flags, if (ret) goto release_umem; - ret = hns_roce_ib_umem_write_mr(hr_dev, mr, mr->umem); if (ret) { if (mr->size != ~0ULL) { @@ -1307,14 +1305,11 @@ static int rereg_mr_trans(struct ib_mr *ibmr, int flags, } return 0; - release_umem: ib_umem_release(mr->umem); return ret; - } - int hns_roce_rereg_user_mr(struct ib_mr *ibmr, int flags, u64 start, u64 length, u64 virt_addr, int mr_access_flags, struct ib_pd *pd, struct ib_udata *udata) -- 2.25.1

1 0

[PATCH] Revert "zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()"
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Wade Mealing <wmealing(a)redhat.com> mainline inclusion from mainline-v5.8 commit 853eab68afc80f59f36bbdeb715e5c88c501e680 category: bugfix bugzilla: NA CVE: CVE-2020-10781 --------------------------- Turns out that the permissions for 0400 really are what we want here, otherwise any user can read from this file. [fixed formatting, added changelog, and made attribute static - gregkh] Reported-by: Wade Mealing <wmealing(a)redhat.com> Cc: stable <stable(a)vger.kernel.org> Fixes: f40609d1591f ("zram: convert remaining CLASS_ATTR() to CLASS_ATTR_RO()") Link: https://bugzilla.redhat.com/show_bug.cgi?id=1847832 Reviewed-by: Steffen Maier <maier(a)linux.ibm.com> Acked-by: Minchan Kim <minchan(a)kernel.org> Link: https://lore.kernel.org/r/20200617114946.GA2131650@kroah.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/zram/zram_drv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index 76abe40bfa83..52850c10165e 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -1802,7 +1802,8 @@ static ssize_t hot_add_show(struct class *class, return ret; return scnprintf(buf, PAGE_SIZE, "%d\n", ret); } -static CLASS_ATTR_RO(hot_add); +static struct class_attribute class_attr_hot_add = + __ATTR(hot_add, 0400, hot_add_show, NULL); static ssize_t hot_remove_store(struct class *class, struct class_attribute *attr, -- 2.25.1

1 0

[PATCH 01/35] can: introduce CAN midlayer private and allocate it automatically
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Marc Kleine-Budde <mkl(a)pengutronix.de> mainline inclusion from mainline-v5.4-rc1 commit ffd956eef69b212a724b1cc4cdc61828f3ad9104 category: feature bugzilla: 38684 CVE: NA --------------------------- This patch introduces the CAN midlayer private structure ("struct can_ml_priv") which should be used to hold protocol specific per device data structures. For now it's only member is "struct can_dev_rcv_lists". The CAN midlayer private is allocated via alloc_netdev()'s private and assigned to "struct net_device::ml_priv" during device creation. This is done transparently for CAN drivers using alloc_candev(). The slcan, vcan and vxcan drivers which are not using alloc_candev() have been adopted manually. The memory layout of the netdev_priv allocated via alloc_candev() will looke like this: +-------------------------+ | driver's priv | +-------------------------+ | struct can_ml_priv | +-------------------------+ | array of struct sk_buff | +-------------------------+ Signed-off-by: Oleksij Rempel <o.rempel(a)pengutronix.de> Signed-off-by: Oliver Hartkopp <socketcan(a)hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> Signed-off-by: Zhang Changzhong <zhangchangzhong(a)huawei.com> Reviewed-by: YueHaibing <yuehaibing(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/can/dev.c | 22 ++++++++++--- drivers/net/can/slcan.c | 5 ++- drivers/net/can/vcan.c | 6 ++-- drivers/net/can/vxcan.c | 3 +- include/linux/can/can-ml.h | 66 ++++++++++++++++++++++++++++++++++++++ net/can/af_can.c | 1 + net/can/af_can.h | 15 --------- net/can/proc.c | 1 + 8 files changed, 96 insertions(+), 23 deletions(-) create mode 100644 include/linux/can/can-ml.h diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 1545f2b299d0..1723c848d0c4 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -23,6 +23,7 @@ #include <linux/if_arp.h> #include <linux/workqueue.h> #include <linux/can.h> +#include <linux/can/can-ml.h> #include <linux/can/dev.h> #include <linux/can/skb.h> #include <linux/can/netlink.h> @@ -729,11 +730,24 @@ struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max, struct can_priv *priv; int size; + /* We put the driver's priv, the CAN mid layer priv and the + * echo skb into the netdevice's priv. The memory layout for + * the netdev_priv is like this: + * + * +-------------------------+ + * | driver's priv | + * +-------------------------+ + * | struct can_ml_priv | + * +-------------------------+ + * | array of struct sk_buff | + * +-------------------------+ + */ + + size = ALIGN(sizeof_priv, NETDEV_ALIGN) + sizeof(struct can_ml_priv); + if (echo_skb_max) - size = ALIGN(sizeof_priv, sizeof(struct sk_buff *)) + + size = ALIGN(size, sizeof(struct sk_buff *)) + echo_skb_max * sizeof(struct sk_buff *); - else - size = sizeof_priv; dev = alloc_netdev_mqs(size, "can%d", NET_NAME_UNKNOWN, can_setup, txqs, rxqs); @@ -746,7 +760,7 @@ struct net_device *alloc_candev_mqs(int sizeof_priv, unsigned int echo_skb_max, if (echo_skb_max) { priv->echo_skb_max = echo_skb_max; priv->echo_skb = (void *)priv + - ALIGN(sizeof_priv, sizeof(struct sk_buff *)); + (size - echo_skb_max * sizeof(struct sk_buff *)); } priv->state = CAN_STATE_STOPPED; diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index f99cd94509be..3abce32b7dcf 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -55,6 +55,7 @@ #include <linux/workqueue.h> #include <linux/can.h> #include <linux/can/skb.h> +#include <linux/can/can-ml.h> MODULE_ALIAS_LDISC(N_SLCAN); MODULE_DESCRIPTION("serial line CAN interface"); @@ -519,6 +520,7 @@ static struct slcan *slc_alloc(void) char name[IFNAMSIZ]; struct net_device *dev = NULL; struct slcan *sl; + int size; for (i = 0; i < maxdev; i++) { dev = slcan_devs[i]; @@ -532,7 +534,8 @@ static struct slcan *slc_alloc(void) return NULL; sprintf(name, "slcan%d", i); - dev = alloc_netdev(sizeof(*sl), name, NET_NAME_UNKNOWN, slc_setup); + size = ALIGN(sizeof(*sl), NETDEV_ALIGN) + sizeof(struct can_ml_priv); + dev = alloc_netdev(size, name, NET_NAME_UNKNOWN, slc_setup); if (!dev) return NULL; diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c index d200a5b0651c..603f53b81d86 100644 --- a/drivers/net/can/vcan.c +++ b/drivers/net/can/vcan.c @@ -45,6 +45,7 @@ #include <linux/if_arp.h> #include <linux/if_ether.h> #include <linux/can.h> +#include <linux/can/can-ml.h> #include <linux/can/dev.h> #include <linux/can/skb.h> #include <linux/slab.h> @@ -167,8 +168,9 @@ static void vcan_setup(struct net_device *dev) } static struct rtnl_link_ops vcan_link_ops __read_mostly = { - .kind = DRV_NAME, - .setup = vcan_setup, + .kind = DRV_NAME, + .priv_size = sizeof(struct can_ml_priv), + .setup = vcan_setup, }; static __init int vcan_init_module(void) diff --git a/drivers/net/can/vxcan.c b/drivers/net/can/vxcan.c index ed6828821fbd..3cc957f0a529 100644 --- a/drivers/net/can/vxcan.c +++ b/drivers/net/can/vxcan.c @@ -29,6 +29,7 @@ #include <linux/can/dev.h> #include <linux/can/skb.h> #include <linux/can/vxcan.h> +#include <linux/can/can-ml.h> #include <linux/slab.h> #include <net/rtnetlink.h> @@ -292,7 +293,7 @@ static struct net *vxcan_get_link_net(const struct net_device *dev) static struct rtnl_link_ops vxcan_link_ops = { .kind = DRV_NAME, - .priv_size = sizeof(struct vxcan_priv), + .priv_size = ALIGN(sizeof(struct vxcan_priv), NETDEV_ALIGN) + sizeof(struct can_ml_priv), .setup = vxcan_setup, .newlink = vxcan_newlink, .dellink = vxcan_dellink, diff --git a/include/linux/can/can-ml.h b/include/linux/can/can-ml.h new file mode 100644 index 000000000000..0a9d778de8af --- /dev/null +++ b/include/linux/can/can-ml.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) */ +/* Copyright (c) 2002-2007 Volkswagen Group Electronic Research + * Copyright (c) 2017 Pengutronix, Marc Kleine-Budde <kernel(a)pengutronix.de> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. Neither the name of Volkswagen nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * Alternatively, provided that this notice is retained in full, this + * software may be distributed under the terms of the GNU General + * Public License ("GPL") version 2, in which case the provisions of the + * GPL apply INSTEAD OF those given above. + * + * The provided data structures and external interfaces from this code + * are not restricted to be used by modules with a GPL compatible license. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH + * DAMAGE. + * + */ + +#ifndef CAN_ML_H +#define CAN_ML_H + +#include <linux/can.h> +#include <linux/list.h> + +#define CAN_SFF_RCV_ARRAY_SZ (1 << CAN_SFF_ID_BITS) +#define CAN_EFF_RCV_HASH_BITS 10 +#define CAN_EFF_RCV_ARRAY_SZ (1 << CAN_EFF_RCV_HASH_BITS) + +enum { RX_ERR, RX_ALL, RX_FIL, RX_INV, RX_MAX }; + +struct can_dev_rcv_lists { + struct hlist_head rx[RX_MAX]; + struct hlist_head rx_sff[CAN_SFF_RCV_ARRAY_SZ]; + struct hlist_head rx_eff[CAN_EFF_RCV_ARRAY_SZ]; + int remove_on_zero_entries; + int entries; +}; + +struct can_ml_priv { + struct can_dev_rcv_lists dev_rcv_lists; +}; + +#endif /* CAN_ML_H */ diff --git a/net/can/af_can.c b/net/can/af_can.c index 04132b0b5d36..9b85b3455bc1 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -58,6 +58,7 @@ #include <linux/can.h> #include <linux/can/core.h> #include <linux/can/skb.h> +#include <linux/can/can-ml.h> #include <linux/ratelimit.h> #include <net/net_namespace.h> #include <net/sock.h> diff --git a/net/can/af_can.h b/net/can/af_can.h index 9cb3719632bd..051a83bedab1 100644 --- a/net/can/af_can.h +++ b/net/can/af_can.h @@ -60,21 +60,6 @@ struct receiver { struct rcu_head rcu; }; -#define CAN_SFF_RCV_ARRAY_SZ (1 << CAN_SFF_ID_BITS) -#define CAN_EFF_RCV_HASH_BITS 10 -#define CAN_EFF_RCV_ARRAY_SZ (1 << CAN_EFF_RCV_HASH_BITS) - -enum { RX_ERR, RX_ALL, RX_FIL, RX_INV, RX_MAX }; - -/* per device receive filters linked at dev->ml_priv */ -struct can_dev_rcv_lists { - struct hlist_head rx[RX_MAX]; - struct hlist_head rx_sff[CAN_SFF_RCV_ARRAY_SZ]; - struct hlist_head rx_eff[CAN_EFF_RCV_ARRAY_SZ]; - int remove_on_zero_entries; - int entries; -}; - /* statistic structures */ /* can be reset e.g. by can_init_stats() */ diff --git a/net/can/proc.c b/net/can/proc.c index 70fea17bb04c..f132ee6282e4 100644 --- a/net/can/proc.c +++ b/net/can/proc.c @@ -44,6 +44,7 @@ #include <linux/list.h> #include <linux/rcupdate.h> #include <linux/if_arp.h> +#include <linux/can/can-ml.h> #include <linux/can/core.h> #include "af_can.h" -- 2.25.1

1 34

[PATCH 01/30] net: hns3: fix reset bug
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Shengzui You <youshengzui(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA ------------------------------ If two interrupts are triggered continuously within 15 seconds, modify the timer and reset again after 15 seconds. Signed-off-by: Shengzui You <youshengzui(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Zhaohui Zhong <zhongzhaohui(a)huawei.com> Reviewed-by: Junxin Chen <chenjunxin1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../hisilicon/hns3/hns-customer/hns3pf/hclge_main_it.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_main_it.c b/drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_main_it.c index b8cab1665385..01f0e19f1e50 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_main_it.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_main_it.c @@ -115,13 +115,15 @@ void hclge_reset_event_it(struct pci_dev *pdev, struct hnae3_handle *handle) * not allow it again before 12*HZ times. */ if (time_before(jiffies, (hdev->last_reset_time + - HCLGE_RESET_INTERVAL))) + HCLGE_RESET_INTERVAL))) { + mod_timer(&hdev->reset_timer, jiffies + HCLGE_RESET_INTERVAL); return; - else if (hdev->default_reset_request) + } else if (hdev->default_reset_request) { hdev->reset_level = hclge_get_reset_level(ae_dev, &hdev->default_reset_request); - else if (time_after(jiffies, (hdev->last_reset_time + 4 * 5 * HZ))) + } else if (time_after(jiffies, (hdev->last_reset_time + 4 * 5 * HZ))) { hdev->reset_level = HNAE3_FUNC_RESET; + } dev_info(&hdev->pdev->dev, "IT received reset event, reset type is %d", hdev->reset_level); -- 2.25.1

1 29

[PATCH] sdei_watchdog: fix compile error when CONFIG_HARDLOCKUP_DETECTOR is not set
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: bugfix bugzilla: NA CVE: NA ----------------------------------------------- sdei_watchdog use function 'watchdog_hardlockup_check()' to check whether a hardlockup exists. This function is included by CONFIG_HARDLOCKUP_DETECTOR. So select CONFIG_HARDLOCKUP_DETECTOR when CONFIG_SDEI_WATCHDOG is set. Otherwise a compile error as below will be shown. arch/arm64/kernel/watchdog_sdei.c: In function ‘watchdog_nmi_enable’: arch/arm64/kernel/watchdog_sdei.c:38:35: error: ‘watchdog_thresh’ undeclared (first use in this function) sdei_api_set_secure_timer_period(watchdog_thresh); ^ arch/arm64/kernel/watchdog_sdei.c:38:35: note: each undeclared identifier is reported only once for each function it appears in arch/arm64/kernel/watchdog_sdei.c: In function ‘watchdog_nmi_probe’: arch/arm64/kernel/watchdog_sdei.c:119:39: error: ‘watchdog_thresh’ undeclared (first use in this function) if (sdei_api_set_secure_timer_period(watchdog_thresh)) { Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- lib/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index bc65f3b8a8b5..47dca144782b 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -845,6 +845,7 @@ config SDEI_WATCHDOG bool "SDEI NMI Watchdog support" depends on ARM_SDE_INTERFACE && !HARDLOCKUP_CHECK_TIMESTAMP select HAVE_HARDLOCKUP_DETECTOR_ARCH + select HARDLOCKUP_DETECTOR config PMU_WATCHDOG bool "PMU NMI Watchdog support" -- 2.25.1

1 0

[PATCH 1/2] net/hinic: Add support for X86 Arch
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Chiqijun <chiqijun(a)huawei.com> driver inclusion category: feature bugzilla: 4472 ----------------------------------------------------------------------- Add support for X86 Arch. Add the best default interrupt aggregation parameter and LRO parameter on x86 platform. Signed-off-by: Chiqijun <chiqijun(a)huawei.com> Reviewed-by: Zengweiliang <zengweiliang.zengweiliang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/Kconfig | 1 - drivers/net/ethernet/huawei/hinic/hinic_hwif.c | 10 ++++++++++ drivers/net/ethernet/huawei/hinic/hinic_hwif.h | 4 ++++ drivers/net/ethernet/huawei/hinic/hinic_lld.c | 17 ++++++++++++++++- drivers/net/ethernet/huawei/hinic/hinic_main.c | 6 ++++++ .../net/ethernet/huawei/hinic/hinic_nic_cfg.h | 14 ++++++++++++++ 6 files changed, 50 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/huawei/Kconfig b/drivers/net/ethernet/huawei/Kconfig index dc48e5163531..c1a95ae4058b 100644 --- a/drivers/net/ethernet/huawei/Kconfig +++ b/drivers/net/ethernet/huawei/Kconfig @@ -5,7 +5,6 @@ config NET_VENDOR_HUAWEI bool "Huawei devices" default y - depends on ARM64 ---help--- If you have a network (Ethernet) card belonging to this class, say Y. Note that the answer to this question doesn't directly affect the diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwif.c b/drivers/net/ethernet/huawei/hinic/hinic_hwif.c index 1fc0fa57f313..b267084d3672 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwif.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwif.c @@ -368,7 +368,12 @@ void hinic_free_db_addr(void *hwdev, void __iomem *db_base, hwif = ((struct hinic_hwdev *)hwdev)->hwif; idx = DB_IDX(db_base, hwif->db_base); +#if defined(__aarch64__) /* No need to unmap */ +#else + if (dwqe_base && hwif->chip_mode == CHIP_MODE_NORMAL) + io_mapping_unmap(dwqe_base); +#endif free_db_idx(hwif, idx); } @@ -398,7 +403,12 @@ int hinic_alloc_db_addr(void *hwdev, void __iomem **db_base, offset = ((u64)idx) << PAGE_SHIFT; +#if defined(__aarch64__) *dwqe_base = hwif->dwqe_mapping + offset; +#else + *dwqe_base = io_mapping_map_wc(hwif->dwqe_mapping, offset, + HINIC_DB_PAGE_SIZE); +#endif if (!(*dwqe_base)) { hinic_free_db_addr(hwdev, *db_base, NULL); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwif.h b/drivers/net/ethernet/huawei/hinic/hinic_hwif.h index 9cd2ad8c5962..3a58a44b6bfe 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwif.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwif.h @@ -58,7 +58,11 @@ struct hinic_hwif { u64 db_base_phy; u8 __iomem *db_base; +#if defined(__aarch64__) void __iomem *dwqe_mapping; +#else + struct io_mapping *dwqe_mapping; +#endif struct hinic_free_db_area free_db_area; struct hinic_func_attr attr; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_lld.c b/drivers/net/ethernet/huawei/hinic/hinic_lld.c index 2ad6d2d23207..20e3b0bde8ef 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_lld.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_lld.c @@ -114,7 +114,11 @@ struct hinic_pcidev { u64 db_base_phy; void __iomem *db_base; +#if defined(__aarch64__) void __iomem *dwqe_mapping; +#else + struct io_mapping *dwqe_mapping; +#endif /* lock for attach/detach uld */ struct mutex pdev_mutex; struct hinic_sriov_info sriov_info; @@ -1874,9 +1878,15 @@ static int mapping_bar(struct pci_dev *pdev, struct hinic_pcidev *pci_adapter) dwqe_addr = pci_adapter->db_base_phy + db_dwqe_size; +#if defined(__aarch64__) /* arm do not support call ioremap_wc() */ pci_adapter->dwqe_mapping = __ioremap(dwqe_addr, db_dwqe_size, __pgprot(PROT_DEVICE_nGnRnE)); +#else + pci_adapter->dwqe_mapping = io_mapping_create_wc(dwqe_addr, + db_dwqe_size); + +#endif if (!pci_adapter->dwqe_mapping) { sdk_err(&pci_adapter->pcidev->dev, "Failed to io_mapping_create_wc\n"); goto mapping_dwqe_err; @@ -1898,8 +1908,13 @@ static int mapping_bar(struct pci_dev *pdev, struct hinic_pcidev *pci_adapter) static void unmapping_bar(struct hinic_pcidev *pci_adapter) { - if (pci_adapter->chip_mode == CHIP_MODE_NORMAL) + if (pci_adapter->chip_mode == CHIP_MODE_NORMAL) { +#if defined(__aarch64__) iounmap(pci_adapter->dwqe_mapping); +#else + io_mapping_free(pci_adapter->dwqe_mapping); +#endif + } iounmap(pci_adapter->db_base); iounmap(pci_adapter->intr_reg_base); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index dd67d903f739..d78a5e3678b1 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -2908,7 +2908,13 @@ static void adaptive_configuration_init(struct hinic_nic_dev *nic_dev) nic_dev->env_info.os = HINIC_OS_HUAWEI; +#if defined(__aarch64__) nic_dev->env_info.cpu = HINIC_CPU_ARM_GENERIC; +#elif defined(__x86_64__) + nic_dev->env_info.cpu = HINIC_CPU_X86_GENERIC; +#else + nic_dev->env_info.cpu = HINIC_CPU_UNKNOWN; +#endif nic_info(&nic_dev->pdev->dev, "Board type %u, OS type %u, CPU type %u\n", diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h index e0979df6e209..243265072710 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h @@ -56,6 +56,7 @@ #define HINIC_LRO_RX_TIMER_DEFAULT_PG_10GE 10 #define HINIC_LRO_RX_TIMER_DEFAULT_PG_100GE 8 +#if defined(__aarch64__) #define HINIC_LOWEST_LATENCY 1 #define HINIC_RX_RATE_LOW 400000 #define HINIC_RX_COAL_TIME_LOW 20 @@ -67,6 +68,19 @@ #define HINIC_TX_RATE_THRESH 35000 #define HINIC_RX_RATE_LOW_VM 400000 #define HINIC_RX_PENDING_LIMIT_HIGH_VM 50 +#else +#define HINIC_LOWEST_LATENCY 1 +#define HINIC_RX_RATE_LOW 400000 +#define HINIC_RX_COAL_TIME_LOW 16 +#define HINIC_RX_PENDING_LIMIT_LOW 2 +#define HINIC_RX_RATE_HIGH 1000000 +#define HINIC_RX_COAL_TIME_HIGH 225 +#define HINIC_RX_PENDING_LIMIT_HIGH 8 +#define HINIC_RX_RATE_THRESH 50000 +#define HINIC_TX_RATE_THRESH 50000 +#define HINIC_RX_RATE_LOW_VM 100000 +#define HINIC_RX_PENDING_LIMIT_HIGH_VM 87 +#endif enum hinic_board_type { HINIC_BOARD_UNKNOWN = 0, -- 2.25.1

1 1

[PATCH 00/13] steal tasks to improve CPU utilization
by Yang Yingliang 07 Jul '20

07 Jul '20

Cheng Jian (3): disable stealing by default sched/fair: introduce SCHED_STEAL config: enable CONFIG_SCHED_STEAL by default Steve Sistare (10): sched: Provide sparsemask, a reduced contention bitmap sched/topology: Provide hooks to allocate data shared per LLC sched/topology: Provide cfs_overload_cpus bitmap sched/fair: Dynamically update cfs_overload_cpus sched/fair: Hoist idle_stamp up from idle_balance sched/fair: Generalize the detach_task interface sched/fair: Provide can_migrate_task_llc sched/fair: Steal work from an overloaded CPU when CPU goes idle sched/fair: disable stealing if too many NUMA nodes sched/fair: Provide idle search schedstats arch/arm64/configs/euleros_defconfig | 1 + arch/arm64/configs/hulk_defconfig | 1 + arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/configs/storage_ci_defconfig | 1 + arch/arm64/configs/syzkaller_defconfig | 1 + arch/x86/configs/hulk_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + arch/x86/configs/storage_ci_defconfig | 1 + include/linux/sched/topology.h | 3 + init/Kconfig | 15 + kernel/sched/core.c | 35 ++- kernel/sched/fair.c | 367 ++++++++++++++++++++++-- kernel/sched/features.h | 8 + kernel/sched/sched.h | 20 ++ kernel/sched/sparsemask.h | 210 ++++++++++++++ kernel/sched/stats.c | 15 + kernel/sched/stats.h | 20 ++ kernel/sched/topology.c | 141 ++++++++- 18 files changed, 810 insertions(+), 32 deletions(-) create mode 100644 kernel/sched/sparsemask.h -- 2.25.1

1 13

[PATCH 001/125] net: be more gentle about silly gso requests coming from user
by Yang Yingliang 07 Jul '20

07 Jul '20

From: Eric Dumazet <edumazet(a)google.com> commit 7c6d2ecbda83150b2036a2b36b21381ad4667762 upstream. Recent change in virtio_net_hdr_to_skb() broke some packetdrill tests. When --mss=XXX option is set, packetdrill always provide gso_type & gso_size for its inbound packets, regardless of packet size. if (packet->tcp && packet->mss) { if (packet->ipv4) gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4; else gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6; gso.gso_size = packet->mss; } Since many other programs could do the same, relax virtio_net_hdr_to_skb() to no longer return an error, but instead ignore gso settings. This keeps Willem intent to make sure no malicious packet could reach gso stack. Note that TCP stack has a special logic in tcp_set_skb_tso_segs() to clear gso_size for small packets. Fixes: 6dd912f82680 ("net: check untrusted gso_size at kernel entry") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Cc: Willem de Bruijn <willemb(a)google.com> Acked-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Cc: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/virtio_net.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 1c296f370e46..f32fe7080d2e 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -109,16 +109,17 @@ static inline int virtio_net_hdr_to_skb(struct sk_buff *skb, if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { u16 gso_size = __virtio16_to_cpu(little_endian, hdr->gso_size); + struct skb_shared_info *shinfo = skb_shinfo(skb); - if (skb->len - p_off <= gso_size) - return -EINVAL; - - skb_shinfo(skb)->gso_size = gso_size; - skb_shinfo(skb)->gso_type = gso_type; + /* Too small packets are not really GSO ones. */ + if (skb->len - p_off > gso_size) { + shinfo->gso_size = gso_size; + shinfo->gso_type = gso_type; - /* Header must be checked, and gso_segs computed. */ - skb_shinfo(skb)->gso_type |= SKB_GSO_DODGY; - skb_shinfo(skb)->gso_segs = 0; + /* Header must be checked, and gso_segs computed. */ + shinfo->gso_type |= SKB_GSO_DODGY; + shinfo->gso_segs = 0; + } } return 0; -- 2.25.1

1 124

[PATCH 01/35] selinux: allow labeling before policy is loaded
by Roberto Sassu 06 Jul '20

06 Jul '20

From: Jonathan Lebon <jlebon(a)redhat.com> mainline inclusion from mainline-v5.5-rc1 commit 3e3e24b42043eceb97ed834102c2d094dfd7aaa6 category: bugfix --------------------------- Currently, the SELinux LSM prevents one from setting the `security.selinux` xattr on an inode without a policy first being loaded. However, this restriction is problematic: it makes it impossible to have newly created files with the correct label before actually loading the policy. This is relevant in distributions like Fedora, where the policy is loaded by systemd shortly after pivoting out of the initrd. In such instances, all files created prior to pivoting will be unlabeled. One then has to relabel them after pivoting, an operation which inherently races with other processes trying to access those same files. Going further, there are use cases for creating the entire root filesystem on first boot from the initrd (e.g. Container Linux supports this today[1], and we'd like to support it in Fedora CoreOS as well[2]). One can imagine doing this in two ways: at the block device level (e.g. laying down a disk image), or at the filesystem level. In the former, labeling can simply be part of the image. But even in the latter scenario, one still really wants to be able to set the right labels when populating the new filesystem. This patch enables this by changing behaviour in the following two ways: 1. allow `setxattr` on mounts without `SBLABEL_MNT` (which is all of them if no policy is loaded yet) 2. don't try to set the in-core inode SID if we're not initialized; instead leave it as `LABEL_INVALID` so that revalidation may be attempted at a later time Note the first hunk of this patch is functionally the same as a previously discussed one[3], though it was part of a larger series which wasn't accepted. Co-developed-by: Victor Kamensky <kamensky(a)cisco.com> Signed-off-by: Victor Kamensky <kamensky(a)cisco.com> Signed-off-by: Jonathan Lebon <jlebon(a)redhat.com> [1] https://coreos.com/os/docs/latest/root-filesystem-placement.html [2] https://github.com/coreos/fedora-coreos-tracker/issues/94 [3] https://www.spinics.net/lists/linux-initramfs/msg04593.html --- security/selinux/hooks.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 452254fd89f8..931546d80211 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3305,7 +3305,7 @@ static int selinux_inode_setxattr(struct dentry *dentry, const char *name, } sbsec = inode->i_sb->s_security; - if (!(sbsec->flags & SBLABEL_MNT)) + if (!(sbsec->flags & SBLABEL_MNT) && selinux_state.initialized) return -EOPNOTSUPP; if (!inode_owner_or_capable(inode)) @@ -3387,6 +3387,15 @@ static void selinux_inode_post_setxattr(struct dentry *dentry, const char *name, return; } + if (!selinux_state.initialized) { + /* If we haven't even been initialized, then we can't validate + * against a policy, so leave the label as invalid. It may + * resolve to a valid label on the next revalidation try if + * we've since initialized. + */ + return; + } + rc = security_context_to_sid_force(&selinux_state, value, size, &newsid); if (rc) { -- 2.27.GIT

1 4

[PATCH] fs/filescontrol: add a switch to enable / disable accounting of open fds
by Yang Yingliang 02 Jul '20

02 Jul '20

From: Yu Kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: 38268 CVE: NA --------------------------- Such switch can only set the accounting of open fds in filescontrol from enable to disable. If it is disabled arealdy, the switch can't enable it. The counter is enabled by default, and it can be disabled by: a. echo 1 > /sys/fs/cgroup/files/files.no_acct b. add "filescontrol.no_acct=1" to boot cmd Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/filescontrol.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/fs/filescontrol.c b/fs/filescontrol.c index 5ec5096383c3..32f3a127579c 100644 --- a/fs/filescontrol.c +++ b/fs/filescontrol.c @@ -25,14 +25,17 @@ #include <linux/seq_file.h> #include <linux/fdtable.h> #include <linux/sched/signal.h> +#include <linux/module.h> #define FILES_MAX D_COUNT_MAX #define FILES_MAX_STR "max" - +static bool no_acct; struct cgroup_subsys files_cgrp_subsys __read_mostly; EXPORT_SYMBOL(files_cgrp_subsys); +module_param(no_acct, bool, 0444); + struct files_cgroup { struct cgroup_subsys_state css; struct page_counter open_handles; @@ -204,7 +207,7 @@ int files_cgroup_alloc_fd(struct files_struct *files, u64 n) * we don't charge their fds, only issue is that files.usage * won't be accurate in root files cgroup. */ - if (files != &init_files) { + if (!no_acct && files != &init_files) { struct page_counter *fail_res; struct files_cgroup *files_cgroup = files_cgroup_from_files(files); @@ -222,7 +225,7 @@ void files_cgroup_unalloc_fd(struct files_struct *files, u64 n) * It's not charged so no need to uncharge, see comments in * files_cgroup_alloc_fd. */ - if (files != &init_files) { + if (!no_acct && files != &init_files) { struct files_cgroup *files_cgroup = files_cgroup_from_files(files); page_counter_uncharge(&files_cgroup->open_handles, n); @@ -230,6 +233,21 @@ void files_cgroup_unalloc_fd(struct files_struct *files, u64 n) } EXPORT_SYMBOL(files_cgroup_unalloc_fd); +static u64 files_disabled_read(struct cgroup_subsys_state *css, + struct cftype *cft) +{ + return no_acct; +} + +static int files_disabled_write(struct cgroup_subsys_state *css, + struct cftype *cft, u64 val) +{ + if (!val) + return -EINVAL; + no_acct = true; + + return 0; +} static int files_limit_read(struct seq_file *sf, void *v) { @@ -291,6 +309,12 @@ static struct cftype files[] = { .name = "usage", .read_u64 = files_usage_read, }, + { + .name = "no_acct", + .flags = CFTYPE_ONLY_ON_ROOT, + .read_u64 = files_disabled_read, + .write_u64 = files_disabled_write, + }, { } }; -- 2.25.1

1 0

[PATCH] usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect
by Yang Yingliang 01 Jul '20

01 Jul '20

From: Zqiang <qiang.zhang(a)windriver.com> mainline inclusion from mainline-v5.8-rc3 commit 28ebeb8db77035e058a510ce9bd17c2b9a009dba category: bugfix bugzilla: NA CVE: CVE-2020-15393 --------------------------- BUG: memory leak unreferenced object 0xffff888055046e00 (size 256): comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s) hex dump (first 32 bytes): 00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z..... f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7....... backtrace: [<00000000d121dccf>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline] [<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline] [<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811 [<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline] [<000000005c3c3381>] usbtest_probe+0x286/0x19d0 drivers/usb/misc/usbtest.c:2790 [<000000001cec6910>] usb_probe_interface+0x2bd/0x870 drivers/usb/core/driver.c:361 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 [<000000003ef66004>] __device_attach_driver+0x1b6/0x240 drivers/base/dd.c:831 [<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431 [<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897 [<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944 [<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491 [<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504 [<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0 drivers/usb/core/message.c:2030 [<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210 [<0000000098ade0f1>] usb_probe_device+0x90/0xd0 drivers/usb/core/driver.c:266 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 Acked-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-by: Kyungtae Kim <kt0755(a)gmail.com> Signed-off-by: Zqiang <qiang.zhang(a)windriver.com> Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/usb/misc/usbtest.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index c7f82310e73e..fc3fc9d48a55 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -2853,6 +2853,7 @@ static void usbtest_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); dev_dbg(&intf->dev, "disconnect\n"); + kfree(dev->buf); kfree(dev); } -- 2.25.1

1 0

[PATCH] genirq/debugfs: Add missing sanity checks to interrupt injection
by Yang Yingliang 01 Jul '20

01 Jul '20

From: Thomas Gleixner <tglx(a)linutronix.de> mainline inclusion from mainline-v5.6 commit a740a423c36932695b01a3e920f697bc55b05fec category: bugfix bugzilla: 32425 CVE: NA ------------------- Interrupts cannot be injected when the interrupt is not activated and when a replay is already in progress. Fixes: 536e2e34bd00 ("genirq/debugfs: Triggering of interrupts from userspace") Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Acked-by: Marc Zyngier <maz(a)kernel.org> Link: https://lkml.kernel.org/r/20200306130623.500019114@linutronix.de Signed-off-by: Yuan Can <yuancan(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/irq/debugfs.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/kernel/irq/debugfs.c b/kernel/irq/debugfs.c index 0a7365456e72..4eb5c62991fe 100644 --- a/kernel/irq/debugfs.c +++ b/kernel/irq/debugfs.c @@ -206,8 +206,15 @@ static ssize_t irq_debug_write(struct file *file, const char __user *user_buf, chip_bus_lock(desc); raw_spin_lock_irqsave(&desc->lock, flags); - if (irq_settings_is_level(desc) || desc->istate & IRQS_NMI) { - /* Can't do level nor NMIs, sorry */ + /* + * Don't allow injection when the interrupt is: + * - Level or NMI type + * - not activated + * - replaying already + */ + if (irq_settings_is_level(desc) || + !irqd_is_activated(&desc->irq_data) || + (desc->istate & (IRQS_NMI | IRQS_REPLAY))) { err = -EINVAL; } else { desc->istate |= IRQS_PENDING; -- 2.25.1

1 0

[PATCH] perf top: Fix stdio interface input handling with glibc 2.28+
by Yang Yingliang 01 Jul '20

01 Jul '20

From: Tommi Rantala <tommi.t.rantala(a)nokia.com> mainline inclusion from mainline-5.6-rc6 commit 29b4f5f18857 category: bugfix bugzilla: 31774 CVE: NA ------------------------------------------------- Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS) * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by: Tommi Rantala <tommi.t.rantala(a)nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Link: http://lore.kernel.org/lkml/20200305083714.9381-2-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- tools/perf/builtin-top.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index 781f6cf1cda6..265c074cbe3b 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -661,7 +661,9 @@ static void *display_thread(void *arg) delay_msecs = top->delay_secs * MSEC_PER_SEC; set_term_quiet_input(&save); /* trash return*/ - getc(stdin); + clearerr(stdin); + if (poll(&stdin_poll, 1, 0) > 0) + getc(stdin); while (!done) { perf_top__print_sym_table(top); -- 2.25.1

1 0

[PATCH] vfio/pci: Fix SR-IOV VF handling with MMIO blocking
by Yang Yingliang 30 Jun '20

30 Jun '20

From: Alex Williamson <alex.williamson(a)redhat.com> mainline inclusion from mainline-v5.8-rc3 commit ebfa440ce38b7e2e04c3124aa89c8a9f4094cf21 category: bugfix bugzilla: NA CVE: CVE-2020-12888 --------------------------- SR-IOV VFs do not implement the memory enable bit of the command register, therefore this bit is not set in config space after pci_enable_device(). This leads to an unintended difference between PF and VF in hand-off state to the user. We can correct this by setting the initial value of the memory enable bit in our virtualized config space. There's really no need however to ever fault a user on a VF though as this would only indicate an error in the user's management of the enable bit, versus a PF where the same access could trigger hardware faults. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/vfio/pci/vfio_pci_config.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/vfio_pci_config.c b/drivers/vfio/pci/vfio_pci_config.c index 4fe71fbce194..a1a26465d224 100644 --- a/drivers/vfio/pci/vfio_pci_config.c +++ b/drivers/vfio/pci/vfio_pci_config.c @@ -401,9 +401,15 @@ static inline void p_setd(struct perm_bits *p, int off, u32 virt, u32 write) /* Caller should hold memory_lock semaphore */ bool __vfio_pci_memory_enabled(struct vfio_pci_device *vdev) { + struct pci_dev *pdev = vdev->pdev; u16 cmd = le16_to_cpu(*(__le16 *)&vdev->vconfig[PCI_COMMAND]); - return cmd & PCI_COMMAND_MEMORY; + /* + * SR-IOV VF memory enable is handled by the MSE bit in the + * PF SR-IOV capability, there's therefore no need to trigger + * faults based on the virtual value. + */ + return pdev->is_virtfn || (cmd & PCI_COMMAND_MEMORY); } /* @@ -1732,6 +1738,15 @@ int vfio_config_init(struct vfio_pci_device *vdev) vconfig[PCI_INTERRUPT_PIN]); vconfig[PCI_INTERRUPT_PIN] = 0; /* Gratuitous for good VFs */ + + /* + * VFs do no implement the memory enable bit of the COMMAND + * register therefore we'll not have it set in our initial + * copy of config space after pci_enable_device(). For + * consistency with PFs, set the virtual enable bit here. + */ + *(__le16 *)&vconfig[PCI_COMMAND] |= + cpu_to_le16(PCI_COMMAND_MEMORY); } if (!IS_ENABLED(CONFIG_VFIO_PCI_INTX) || vdev->nointx) -- 2.25.1

1 0

[PATCH 1/5] sched/core: Create task_has_idle_policy() helper
by Yang Yingliang 30 Jun '20

30 Jun '20

From: Viresh Kumar <viresh.kumar(a)linaro.org> mainline inclusion from mainline-v5.0-rc1 commit 1da1843f9f0334e2428308945d396ffecc2acfe1 category: feature bugzilla: 38260 CVE: NA --------------------------- We already have task_has_rt_policy() and task_has_dl_policy() helpers, create task_has_idle_policy() as well and update sched core to start using it. While at it, use task_has_dl_policy() at one more place. Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Acked-by: Daniel Lezcano <daniel.lezcano(a)linaro.org> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Vincent Guittot <vincent.guittot(a)linaro.org> Link: http://lkml.kernel.org/r/ce3915d5b490fc81af926a3b6bfb775e7188e005.154141689… Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/sched/core.c | 4 ++-- kernel/sched/debug.c | 2 +- kernel/sched/fair.c | 10 +++++----- kernel/sched/sched.h | 5 +++++ 4 files changed, 13 insertions(+), 8 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 0fbdc620697b..c1513905c0de 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -724,7 +724,7 @@ static void set_load_weight(struct task_struct *p, bool update_load) /* * SCHED_IDLE tasks get minimal weight: */ - if (idle_policy(p->policy)) { + if (task_has_idle_policy(p)) { load->weight = scale_load(WEIGHT_IDLEPRIO); load->inv_weight = WMULT_IDLEPRIO; return; @@ -4270,7 +4270,7 @@ static int __sched_setscheduler(struct task_struct *p, * Treat SCHED_IDLE as nice 20. Only allow a switch to * SCHED_NORMAL if the RLIMIT_NICE would normally permit it. */ - if (idle_policy(p->policy) && !idle_policy(policy)) { + if (task_has_idle_policy(p) && !idle_policy(policy)) { if (!can_nice(p, task_nice(p))) return -EPERM; } diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index c542d84dafce..f12382877390 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -1012,7 +1012,7 @@ void proc_sched_show_task(struct task_struct *p, struct pid_namespace *ns, #endif P(policy); P(prio); - if (p->policy == SCHED_DEADLINE) { + if (task_has_dl_policy(p)) { P(dl.runtime); P(dl.deadline); } diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 09b0d83d5bbc..807c7fb78b6f 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -6609,7 +6609,7 @@ wakeup_preempt_entity(struct sched_entity *curr, struct sched_entity *se) static void set_last_buddy(struct sched_entity *se) { - if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE)) + if (entity_is_task(se) && unlikely(task_has_idle_policy(task_of(se)))) return; for_each_sched_entity(se) { @@ -6621,7 +6621,7 @@ static void set_last_buddy(struct sched_entity *se) static void set_next_buddy(struct sched_entity *se) { - if (entity_is_task(se) && unlikely(task_of(se)->policy == SCHED_IDLE)) + if (entity_is_task(se) && unlikely(task_has_idle_policy(task_of(se)))) return; for_each_sched_entity(se) { @@ -6679,8 +6679,8 @@ static void check_preempt_wakeup(struct rq *rq, struct task_struct *p, int wake_ return; /* Idle tasks are by definition preempted by non-idle tasks. */ - if (unlikely(curr->policy == SCHED_IDLE) && - likely(p->policy != SCHED_IDLE)) + if (unlikely(task_has_idle_policy(curr)) && + likely(!task_has_idle_policy(p))) goto preempt; /* @@ -7090,7 +7090,7 @@ static int task_hot(struct task_struct *p, struct lb_env *env) if (p->sched_class != &fair_sched_class) return 0; - if (unlikely(p->policy == SCHED_IDLE)) + if (unlikely(task_has_idle_policy(p))) return 0; /* diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 955abd645ff9..fbe3b3b8a19f 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -184,6 +184,11 @@ static inline bool valid_policy(int policy) rt_policy(policy) || dl_policy(policy); } +static inline int task_has_idle_policy(struct task_struct *p) +{ + return idle_policy(p->policy); +} + static inline int task_has_rt_policy(struct task_struct *p) { return rt_policy(p->policy); -- 2.25.1

1 4

[PATCH 001/204] power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
by Yang Yingliang 29 Jun '20

29 Jun '20

From: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> [ Upstream commit 87c3d579c8ed0eaea6b1567d529a8daa85a2bc6c ] regmap is a library function that gets selected by drivers that need it. No driver modules should depend on it. Depending on REGMAP_I2C makes this driver only build if another driver already selected REGMAP_I2C, as the symbol can't be selected through the menu kernel configuration. Fixes: 2219a935963e ("power_supply: Add TI BQ24257 charger driver") Signed-off-by: Enric Balletbo i Serra <enric.balletbo(a)collabora.com> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/power/supply/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index ff6dab0bf0dd..76c699b5abda 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -555,7 +555,7 @@ config CHARGER_BQ24257 tristate "TI BQ24250/24251/24257 battery charger driver" depends on I2C depends on GPIOLIB || COMPILE_TEST - depends on REGMAP_I2C + select REGMAP_I2C help Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery chargers. -- 2.25.1

1 203

[PATCH 1/2] Revert "ipmi: fix sleep-in-atomic in free_user at cleanup SRCU user->release_barrier"
by Yang Yingliang 29 Jun '20

29 Jun '20

hulk inclusion category: bugfix bugzilla: 5499 CVE: NA --------------------------- cleanup_srcu_struct_quiesced won't free memory if work_pending() is true, and it will cause a memory leak, so revert it and using mainline patch instead. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/char/ipmi/ipmi_msghandler.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 0085d32cef46..7510013f28f8 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -1190,12 +1190,7 @@ EXPORT_SYMBOL(ipmi_get_smi_info); static void free_user(struct kref *ref) { struct ipmi_user *user = container_of(ref, struct ipmi_user, refcount); - - /* - * Cleanup without waiting. This could be called in atomic context. - * Refcount is zero: all read-sections should have been ended. - */ - cleanup_srcu_struct_quiesced(&user->release_barrier); + cleanup_srcu_struct(&user->release_barrier); kfree(user); } -- 2.25.1

1 1

[PATCH 001/257] ipv6: fix IPV6_ADDRFORM operation logic
by Yang Yingliang 29 Jun '20

29 Jun '20

From: Hangbin Liu <liuhangbin(a)gmail.com> [ Upstream commit 79a1f0ccdbb4ad700590f61b00525b390cb53905 ] Socket option IPV6_ADDRFORM supports UDP/UDPLITE and TCP at present. Previously the checking logic looks like: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol != IPPROTO_TCP) break; After commit b6f6118901d1 ("ipv6: restrict IPV6_ADDRFORM operation"), TCP was blocked as the logic changed to: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol == IPPROTO_TCP) do_some_check; break; else break; Then after commit 82c9ae440857 ("ipv6: fix restrict IPV6_ADDRFORM operation") UDP/UDPLITE were blocked as the logic changed to: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; if (sk->sk_protocol == IPPROTO_TCP) do_some_check; if (sk->sk_protocol != IPPROTO_TCP) break; Fix it by using Eric's code and simply remove the break in TCP check, which looks like: if (sk->sk_protocol == IPPROTO_UDP || sk->sk_protocol == IPPROTO_UDPLITE) do_some_check; else if (sk->sk_protocol == IPPROTO_TCP) do_some_check; else break; Fixes: 82c9ae440857 ("ipv6: fix restrict IPV6_ADDRFORM operation") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/ipv6/ipv6_sockglue.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index f255eaaf0136..9ca4e8657534 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -187,14 +187,15 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, retv = -EBUSY; break; } - } - if (sk->sk_protocol == IPPROTO_TCP && - sk->sk_prot != &tcpv6_prot) { - retv = -EBUSY; + } else if (sk->sk_protocol == IPPROTO_TCP) { + if (sk->sk_prot != &tcpv6_prot) { + retv = -EBUSY; + break; + } + } else { break; } - if (sk->sk_protocol != IPPROTO_TCP) - break; + if (sk->sk_state != TCP_ESTABLISHED) { retv = -ENOTCONN; break; -- 2.25.1

1 256

[PATCH 1/3] vfio/type1: Support faulting PFNMAP vmas
by Yang Yingliang 28 Jun '20

28 Jun '20

From: Alex Williamson <alex.williamson(a)redhat.com> mainline inclusion from mainline-v5.8-rc1 commit 41311242221e3482b20bfed10fa4d9db98d87016 category: bugfix bugzilla: NA CVE: CVE-2020-12888 --------------------------- With conversion to follow_pfn(), DMA mapping a PFNMAP range depends on the range being faulted into the vma. Add support to manually provide that, in the same way as done on KVM with hva_to_pfn_remapped(). Reviewed-by: Peter Xu <peterx(a)redhat.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Conflicts: drivers/vfio/vfio_iommu_type1.c [yyl: adjust context] Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/vfio/vfio_iommu_type1.c | 36 ++++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index 4bfc79635c6a..01be1496307b 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -346,6 +346,32 @@ static int put_pfn(unsigned long pfn, int prot) return 0; } +static int follow_fault_pfn(struct vm_area_struct *vma, struct mm_struct *mm, + unsigned long vaddr, unsigned long *pfn, + bool write_fault) +{ + int ret; + + ret = follow_pfn(vma, vaddr, pfn); + if (ret) { + bool unlocked = false; + + ret = fixup_user_fault(NULL, mm, vaddr, + FAULT_FLAG_REMOTE | + (write_fault ? FAULT_FLAG_WRITE : 0), + &unlocked); + if (unlocked) + return -EAGAIN; + + if (ret) + return ret; + + ret = follow_pfn(vma, vaddr, pfn); + } + + return ret; +} + static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, int prot, unsigned long *pfn) { @@ -385,12 +411,16 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, down_read(&mm->mmap_sem); +retry: vma = find_vma_intersection(mm, vaddr, vaddr + 1); if (vma && vma->vm_flags & VM_PFNMAP) { - if (!follow_pfn(vma, vaddr, pfn) && - is_invalid_reserved_pfn(*pfn)) - ret = 0; + ret = follow_fault_pfn(vma, mm, vaddr, pfn, prot & IOMMU_WRITE); + if (ret == -EAGAIN) + goto retry; + + if (!ret && !is_invalid_reserved_pfn(*pfn)) + ret = -EFAULT; } up_read(&mm->mmap_sem); -- 2.25.1

1 2

[PATCH] Disable cache readunique on 1620 which can cause performance decrease
by shenkai (D) 28 Jun '20

28 Jun '20

From 85f6f7c3bd13b3d6fd064899e2818ee70bdf29e2 Mon Sep 17 00:00:00 2001 euleros inclusion commit 85f6f7c3bd13b3d6fd064899e2818ee70bdf29e2 category: bugfix Random performance decreases appear on cases of Hackbench which test pipe or socket communication among multi-threads on Hisi 1620 SoC. Cache sharing which caused by the change of the data layout and the cache readunique mechanism both lead to this problem. Readunique mechanism which may caused by store operation will invalid cachelines on other cores during data fetching stage which can cause cacheline invalidation happens frequently in a sharing data access situation. Disable cache readunique can trackle this problem. Test cases are like: ./hackbench -pipe 20 thread 1000 On 128 cores 1620 machine, the time cost of above test cases is basicly 0.3s when RU is off while when RU is on the time cost can be over 1s. What's more, we disble readunique only in el2 for in el1 disabling readunique may cause panic due to lack of related priority which often be set in BIOS. Signed-off-by: Kai Shen <shenkai8(a)huawei.com> Reviewed-by: Wenliang He <hewenliang4(a)huawei.com> Reviewed-by: Jinxian He <hejingxian(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Reviewed-by: Wei Li <liwei391(a)huawei.com> --- arch/arm64/Kconfig | 9 +++++++ arch/arm64/configs/euleros_defconfig | 1 + arch/arm64/include/asm/cpucaps.h | 3 ++- arch/arm64/kernel/cpu_errata.c | 37 ++++++++++++++++++++++++++++ 4 files changed, 49 insertions(+), 1 deletion(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index b818273ef..33e185af5 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -642,6 +642,15 @@ config QCOM_FALKOR_ERRATUM_E1041 If unsure, say Y. +config HISILICON_ERRATUM_1620_RU + bool "Hisi 1620 cache readunique might compromise performance" + default y + help + The HiSilicon 1620 cache readunique might compromise performance, + use cmdline to enable or disable RU. + + If unsure, say Y. + endmenu diff --git a/arch/arm64/configs/euleros_defconfig b/arch/arm64/configs/euleros_defconfig index 360e69291..29403bfe4 100644 --- a/arch/arm64/configs/euleros_defconfig +++ b/arch/arm64/configs/euleros_defconfig @@ -5650,3 +5650,4 @@ CONFIG_IO_STRICT_DEVMEM=y # CONFIG_DEBUG_EFI is not set # CONFIG_ARM64_RELOC_TEST is not set # CONFIG_CORESIGHT is not set +CONFIG_HISILICON_ERRATUM_1620=y diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index d56d815b9..112c866c1 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -58,7 +58,8 @@ #define ARM64_SSBS 37 #define ARM64_CLEARPAGE_STNP 38 #define ARM64_WORKAROUND_1542419 39 +#define ARM64_HISI_1620_RU 40 -#define ARM64_NCAPS 40 +#define ARM64_NCAPS 41 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c index 7522163c1..fa751abed 100644 --- a/arch/arm64/kernel/cpu_errata.c +++ b/arch/arm64/kernel/cpu_errata.c @@ -25,6 +25,11 @@ #include <asm/cpufeature.h> #include <asm/smp_plat.h> +#ifdef CONFIG_HISILICON_ERRATUM_1620_RU +#include <asm/ptrace.h> +#include <asm/sysreg.h> +#endif + static bool __maybe_unused is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope) { @@ -491,6 +496,30 @@ cpu_enable_cache_maint_trap(const struct arm64_cpu_capabilities *__unused) sysreg_clear_set(sctlr_el1, SCTLR_EL1_UCI, 0); } +#ifdef CONFIG_HISILICON_ERRATUM_1620_RU +static bool readunique_enabled = false; + +static int __init enable_readunique(char *data) +{ + readunique_enabled = true; + return 0; +} +__setup("readunique_enable", enable_readunique); + +#define CTLR_HISI_1620_RU (1L << 40) +static void __maybe_unused +hisi_1620_ru_disable(const struct arm64_cpu_capabilities *__unused) +{ + u64 el; + if (readunique_enabled) + return; + + el = read_sysreg(CurrentEL); + if (el == CurrentEL_EL2) + sysreg_clear_set(S3_1_c15_c6_4, 0, CTLR_HISI_1620_RU); +} +#endif + /* known invulnerable cores */ static const struct midr_range arm64_ssb_cpus[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A35), @@ -884,6 +913,14 @@ const struct arm64_cpu_capabilities arm64_errata[] = { .matches = has_neoverse_n1_erratum_1542419, .cpu_enable = cpu_enable_trap_ctr_access, }, +#endif +#ifdef CONFIG_HISILICON_ERRATUM_1620_RU + { + .desc = "Hisi 1620 Cache Readunique Disable", + .capability = ARM64_HISI_1620_RU, + ERRATA_MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), + .cpu_enable = hisi_1620_ru_disable, + }, #endif { } -- 2.19.1

1 0

[hulk-4.19 v3 0/6] Adding Huawei BMA drivers
by yunaixin03610＠163.com 28 Jun '20

28 Jun '20

From: yunaixin <yunaixin03610(a)163.com> This patch set contains 5 communication drivers for Huawei BMA software. The BMA software is a system management software. It supports the status monitoring, performance monitoring, and event monitoring of various components, including server CPUs, memory, hard disks, NICs, IB cards, PCIe cards, RAID controller cards, and optical modules. These 5 drivers are used to send/receive message through PCIe channel in different ways by BMA software. yunaixin (6): Huawei BMA: Adding Huawei BMA driver: host_edma_drv Huawei BMA: Adding Huawei BMA driver: host_cdev_drv Huawei BMA: Adding Huawei BMA driver: host_veth_drv Huawei BMA: Adding Huawei BMA driver: cdev_veth_drv Huawei BMA: Adding Huawei BMA driver: host_kbox_drv Huawei BMA: Add BMA driver config options arch/arm64/configs/euleros_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/net/ethernet/huawei/Kconfig | 1 + drivers/net/ethernet/huawei/Makefile | 3 +- drivers/net/ethernet/huawei/bma/Kconfig | 5 + drivers/net/ethernet/huawei/bma/Makefile | 9 + .../net/ethernet/huawei/bma/cdev_drv/Kconfig | 11 + .../net/ethernet/huawei/bma/cdev_drv/Makefile | 2 + .../ethernet/huawei/bma/cdev_drv/bma_cdev.c | 369 +++ .../ethernet/huawei/bma/cdev_veth_drv/Kconfig | 11 + .../huawei/bma/cdev_veth_drv/Makefile | 2 + .../bma/cdev_veth_drv/virtual_cdev_eth_net.c | 1839 ++++++++++++ .../bma/cdev_veth_drv/virtual_cdev_eth_net.h | 300 ++ .../net/ethernet/huawei/bma/edma_drv/Kconfig | 11 + .../net/ethernet/huawei/bma/edma_drv/Makefile | 2 + .../huawei/bma/edma_drv/bma_devintf.c | 597 ++++ .../huawei/bma/edma_drv/bma_devintf.h | 40 + .../huawei/bma/edma_drv/bma_include.h | 116 + .../ethernet/huawei/bma/edma_drv/bma_pci.c | 533 ++++ .../ethernet/huawei/bma/edma_drv/bma_pci.h | 94 + .../ethernet/huawei/bma/edma_drv/edma_host.c | 1462 ++++++++++ .../ethernet/huawei/bma/edma_drv/edma_host.h | 351 +++ .../huawei/bma/include/bma_ker_intf.h | 94 + .../net/ethernet/huawei/bma/kbox_drv/Kconfig | 11 + .../net/ethernet/huawei/bma/kbox_drv/Makefile | 2 + .../ethernet/huawei/bma/kbox_drv/kbox_dump.c | 121 + .../ethernet/huawei/bma/kbox_drv/kbox_dump.h | 33 + .../ethernet/huawei/bma/kbox_drv/kbox_hook.c | 101 + .../ethernet/huawei/bma/kbox_drv/kbox_hook.h | 33 + .../huawei/bma/kbox_drv/kbox_include.h | 40 + .../ethernet/huawei/bma/kbox_drv/kbox_main.c | 168 ++ .../ethernet/huawei/bma/kbox_drv/kbox_main.h | 23 + .../ethernet/huawei/bma/kbox_drv/kbox_mce.c | 264 ++ .../ethernet/huawei/bma/kbox_drv/kbox_mce.h | 23 + .../ethernet/huawei/bma/kbox_drv/kbox_panic.c | 187 ++ .../ethernet/huawei/bma/kbox_drv/kbox_panic.h | 25 + .../huawei/bma/kbox_drv/kbox_printk.c | 363 +++ .../huawei/bma/kbox_drv/kbox_printk.h | 33 + .../huawei/bma/kbox_drv/kbox_ram_drive.c | 188 ++ .../huawei/bma/kbox_drv/kbox_ram_drive.h | 31 + .../huawei/bma/kbox_drv/kbox_ram_image.c | 135 + .../huawei/bma/kbox_drv/kbox_ram_image.h | 84 + .../huawei/bma/kbox_drv/kbox_ram_op.c | 986 +++++++ .../huawei/bma/kbox_drv/kbox_ram_op.h | 77 + .../net/ethernet/huawei/bma/veth_drv/Kconfig | 11 + .../net/ethernet/huawei/bma/veth_drv/Makefile | 2 + .../ethernet/huawei/bma/veth_drv/veth_hb.c | 2502 +++++++++++++++++ .../ethernet/huawei/bma/veth_drv/veth_hb.h | 440 +++ 48 files changed, 11736 insertions(+), 1 deletion(-) create mode 100644 drivers/net/ethernet/huawei/bma/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_drv/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/cdev_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_drv/bma_cdev.c create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.c create mode 100644 drivers/net/ethernet/huawei/bma/cdev_veth_drv/virtual_cdev_eth_net.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_devintf.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_devintf.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_include.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/bma_pci.h create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/edma_host.c create mode 100644 drivers/net/ethernet/huawei/bma/edma_drv/edma_host.h create mode 100644 drivers/net/ethernet/huawei/bma/include/bma_ker_intf.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_dump.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_dump.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_hook.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_hook.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_include.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_main.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_main.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_mce.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_mce.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_panic.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_panic.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_printk.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_printk.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_drive.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_drive.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_image.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_image.h create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_op.c create mode 100644 drivers/net/ethernet/huawei/bma/kbox_drv/kbox_ram_op.h create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/Kconfig create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/Makefile create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.c create mode 100644 drivers/net/ethernet/huawei/bma/veth_drv/veth_hb.h -- 2.26.2.windows.1

2 7

[PATCH 1/8] ovl: fix lookup failure on multi lower squashfs
by Yang Yingliang 24 Jun '20

24 Jun '20

From: Amir Goldstein <amir73il(a)gmail.com> mainline inclusion from mainline-5.5-rc2 commit 7e63c87fc2dcf3be9d3aab82d4a0ea085880bdca category: bugfix bugzilla: 37632 CVE: NA --------------------------- In the past, overlayfs required that lower fs have non null uuid in order to support nfs export and decode copy up origin file handles. Commit 9df085f3c9a2 ("ovl: relax requirement for non null uuid of lower fs") relaxed this requirement for nfs export support, as long as uuid (even if null) is unique among all lower fs. However, said commit unintentionally also relaxed the non null uuid requirement for decoding copy up origin file handles, regardless of the unique uuid requirement. Amend this mistake by disabling decoding of copy up origin file handle from lower fs with a conflicting uuid. We still encode copy up origin file handles from those fs, because file handles like those already exist in the wild and because they might provide useful information in the future. There is an unhandled corner case described by Miklos this way: - two filesystems, A and B, both have null uuid - upper layer is on A - lower layer 1 is also on A - lower layer 2 is on B In this case bad_uuid won't be set for B, because the check only involves the list of lower fs. Hence we'll try to decode a layer 2 origin on layer 1 and fail. We will deal with this corner case later. Reported-by: Colin Ian King <colin.king(a)canonical.com> Tested-by: Colin Ian King <colin.king(a)canonical.com> Link: https://lore.kernel.org/lkml/20191106234301.283006-1-colin.king@canonical.c… Fixes: 9df085f3c9a2 ("ovl: relax requirement for non null uuid ...") Cc: stable(a)vger.kernel.org # v4.20+ Signed-off-by: Amir Goldstein <amir73il(a)gmail.com> Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/overlayfs/namei.c | 8 ++++++++ fs/overlayfs/ovl_entry.h | 2 ++ fs/overlayfs/super.c | 24 +++++++++++++++++------- 3 files changed, 27 insertions(+), 7 deletions(-) diff --git a/fs/overlayfs/namei.c b/fs/overlayfs/namei.c index badf039267a2..62515ec25481 100644 --- a/fs/overlayfs/namei.c +++ b/fs/overlayfs/namei.c @@ -328,6 +328,14 @@ int ovl_check_origin_fh(struct ovl_fs *ofs, struct ovl_fh *fh, bool connected, int i; for (i = 0; i < ofs->numlower; i++) { + /* + * If lower fs uuid is not unique among lower fs we cannot match + * fh->uuid to layer. + */ + if (ofs->lower_layers[i].fsid && + ofs->lower_layers[i].fs->bad_uuid) + continue; + origin = ovl_decode_real_fh(fh, ofs->lower_layers[i].mnt, connected); if (origin) diff --git a/fs/overlayfs/ovl_entry.h b/fs/overlayfs/ovl_entry.h index 1a1adc697c55..787fe4be835e 100644 --- a/fs/overlayfs/ovl_entry.h +++ b/fs/overlayfs/ovl_entry.h @@ -25,6 +25,8 @@ struct ovl_config { struct ovl_sb { struct super_block *sb; dev_t pseudo_dev; + /* Unusable (conflicting) uuid */ + bool bad_uuid; }; struct ovl_layer { diff --git a/fs/overlayfs/super.c b/fs/overlayfs/super.c index ddcf8d3a83bf..3881f07a2434 100644 --- a/fs/overlayfs/super.c +++ b/fs/overlayfs/super.c @@ -1259,7 +1259,7 @@ static bool ovl_lower_uuid_ok(struct ovl_fs *ofs, const uuid_t *uuid) { unsigned int i; - if (!ofs->config.nfs_export && !(ofs->config.index && ofs->upper_mnt)) + if (!ofs->config.nfs_export && !ofs->upper_mnt) return true; for (i = 0; i < ofs->numlowerfs; i++) { @@ -1267,9 +1267,13 @@ static bool ovl_lower_uuid_ok(struct ovl_fs *ofs, const uuid_t *uuid) * We use uuid to associate an overlay lower file handle with a * lower layer, so we can accept lower fs with null uuid as long * as all lower layers with null uuid are on the same fs. + * if we detect multiple lower fs with the same uuid, we + * disable lower file handle decoding on all of them. */ - if (uuid_equal(&ofs->lower_fs[i].sb->s_uuid, uuid)) + if (uuid_equal(&ofs->lower_fs[i].sb->s_uuid, uuid)) { + ofs->lower_fs[i].bad_uuid = true; return false; + } } return true; } @@ -1281,6 +1285,7 @@ static int ovl_get_fsid(struct ovl_fs *ofs, const struct path *path) unsigned int i; dev_t dev; int err; + bool bad_uuid = false; /* fsid 0 is reserved for upper fs even with non upper overlay */ if (ofs->upper_mnt && ofs->upper_mnt->mnt_sb == sb) @@ -1292,11 +1297,15 @@ static int ovl_get_fsid(struct ovl_fs *ofs, const struct path *path) } if (!ovl_lower_uuid_ok(ofs, &sb->s_uuid)) { - ofs->config.index = false; - ofs->config.nfs_export = false; - pr_warn("overlayfs: %s uuid detected in lower fs '%pd2', falling back to index=off,nfs_export=off.\n", - uuid_is_null(&sb->s_uuid) ? "null" : "conflicting", - path->dentry); + bad_uuid = true; + if (ofs->config.index || ofs->config.nfs_export) { + ofs->config.index = false; + ofs->config.nfs_export = false; + pr_warn("overlayfs: %s uuid detected in lower fs '%pd2', falling back to index=off,nfs_export=off.\n", + uuid_is_null(&sb->s_uuid) ? "null" : + "conflicting", + path->dentry); + } } err = get_anon_bdev(&dev); @@ -1307,6 +1316,7 @@ static int ovl_get_fsid(struct ovl_fs *ofs, const struct path *path) ofs->lower_fs[ofs->numlowerfs].sb = sb; ofs->lower_fs[ofs->numlowerfs].pseudo_dev = dev; + ofs->lower_fs[ofs->numlowerfs].bad_uuid = bad_uuid; ofs->numlowerfs++; return ofs->numlowerfs; -- 2.25.1

1 7

[PATCH 1/6] perf top: Fix wrong hottest instruction highlighted
by Yang Yingliang 21 Jun '20

21 Jun '20

From: He Kuang <hekuang(a)huawei.com> mainline inclusion from mainline-5.0-rc5 commit da06d5683868 category: bugfix bugzilla: 38073 CVE: NA ------------------------------------------------- The annotation line percentage is compared and inserted into the rbtree, but the percent field of 'struct annotation_data' is an array, the comparison result between them is the address difference. This patch compares the right slot of percent array according to opts->percent_type and makes things right. The problem can be reproduced by pressing 'H' in perf top annotation view. It should highlight the instruction line which has the highest sampling percentage. Signed-off-by: He Kuang <hekuang(a)huawei.com> Reviewed-by: Jiri Olsa <jolsa(a)kernel.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Link: http://lkml.kernel.org/r/20190120160523.4391-1-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- tools/perf/ui/browsers/annotate.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c index a3c255228d62..131f51131b52 100644 --- a/tools/perf/ui/browsers/annotate.c +++ b/tools/perf/ui/browsers/annotate.c @@ -225,20 +225,24 @@ static unsigned int annotate_browser__refresh(struct ui_browser *browser) return ret; } -static int disasm__cmp(struct annotation_line *a, struct annotation_line *b) +static double disasm__cmp(struct annotation_line *a, struct annotation_line *b, + int percent_type) { int i; for (i = 0; i < a->data_nr; i++) { - if (a->data[i].percent == b->data[i].percent) + if (a->data[i].percent[percent_type] == b->data[i].percent[percent_type]) continue; - return a->data[i].percent < b->data[i].percent; + return a->data[i].percent[percent_type] - + b->data[i].percent[percent_type]; } return 0; } -static void disasm_rb_tree__insert(struct rb_root *root, struct annotation_line *al) +static void disasm_rb_tree__insert(struct annotate_browser *browser, + struct annotation_line *al) { + struct rb_root *root = &browser->entries; struct rb_node **p = &root->rb_node; struct rb_node *parent = NULL; struct annotation_line *l; @@ -247,7 +251,7 @@ static void disasm_rb_tree__insert(struct rb_root *root, struct annotation_line parent = *p; l = rb_entry(parent, struct annotation_line, rb_node); - if (disasm__cmp(al, l)) + if (disasm__cmp(al, l, browser->opts->percent_type) < 0) p = &(*p)->rb_left; else p = &(*p)->rb_right; @@ -330,7 +334,7 @@ static void annotate_browser__calc_percent(struct annotate_browser *browser, RB_CLEAR_NODE(&pos->al.rb_node); continue; } - disasm_rb_tree__insert(&browser->entries, &pos->al); + disasm_rb_tree__insert(browser, &pos->al); } pthread_mutex_unlock(&notes->lock); -- 2.25.1

1 5

[PATCH 1/2] xfs: Use scnprintf() for avoiding potential buffer overflow
by Yang Yingliang 17 Jun '20

17 Jun '20

From: Takashi Iwai <tiwai(a)suse.de> mainline inclusion from mainline-v5.7-rc1 commit 17bb60b74124e9491d593e2601e3afe14daa2f57 category: bugfix bugzilla: 33322 CVE: NA --------------------------- Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: yu kuai <yukuai3(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/xfs_stats.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/xfs/xfs_stats.c b/fs/xfs/xfs_stats.c index 740ac9674848..0373d9ea7334 100644 --- a/fs/xfs/xfs_stats.c +++ b/fs/xfs/xfs_stats.c @@ -58,13 +58,13 @@ int xfs_stats_format(struct xfsstats __percpu *stats, char *buf) /* Loop over all stats groups */ for (i = j = 0; i < ARRAY_SIZE(xstats); i++) { - len += snprintf(buf + len, PATH_MAX - len, "%s", + len += scnprintf(buf + len, PATH_MAX - len, "%s", xstats[i].desc); /* inner loop does each group */ for (; j < xstats[i].endpoint; j++) - len += snprintf(buf + len, PATH_MAX - len, " %u", + len += scnprintf(buf + len, PATH_MAX - len, " %u", counter_val(stats, j)); - len += snprintf(buf + len, PATH_MAX - len, "\n"); + len += scnprintf(buf + len, PATH_MAX - len, "\n"); } /* extra precision counters */ for_each_possible_cpu(i) { @@ -73,9 +73,9 @@ int xfs_stats_format(struct xfsstats __percpu *stats, char *buf) xs_read_bytes += per_cpu_ptr(stats, i)->s.xs_read_bytes; } - len += snprintf(buf + len, PATH_MAX-len, "xpc %Lu %Lu %Lu\n", + len += scnprintf(buf + len, PATH_MAX-len, "xpc %Lu %Lu %Lu\n", xs_xstrat_bytes, xs_write_bytes, xs_read_bytes); - len += snprintf(buf + len, PATH_MAX-len, "debug %u\n", + len += scnprintf(buf + len, PATH_MAX-len, "debug %u\n", #if defined(DEBUG) 1); #else -- 2.25.1

1 1

[PATCH] nfs: set invalid blocks after NFSv4 writes
by Yang Yingliang 16 Jun '20

16 Jun '20

From: Zheng Bin <zhengbin13(a)huawei.com> mainline inclusion from mainline-bc5603c314bd commit bc5603c314bd1d2a931ad3088fcea52f20cfbac5 category: bugfix bugzilla: 34591 CVE: NA --------------------------- Use the following command to test nfsv4(size of file1M is 1MB): mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt cp file1M /mnt du -h /mnt/file1M -->0 within 60s, then 1M When write is done(cp file1M /mnt), will call this: nfs_writeback_done nfs4_write_done nfs4_write_done_cb nfs_writeback_update_inode nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime nfs_post_op_update_inode_force_wcc_locked nfs_set_cache_invalid nfs_refresh_inode_locked nfs_update_inode nfsd write response contains change, ctime, mtime, the flag will be clear after nfs_update_inode. Howerver, write response does not contain space_used, previous open response contains space_used whose value is 0, so inode->i_blocks is still 0. nfs_getattr -->called by "du -h" do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s cache_validity = READ_ONCE(NFS_I(inode)->cache_validity) do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false if (do_update) { __nfs_revalidate_inode } Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M" is 0. Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done. [zb: although commit 1c341b777501 ("NFS: Add deferred cache invalidation for close-to-open consistency violations") not merged, still define NFS_INO_INVALID_BLOCKS BIT(14)] Fixes: 16e143751727 ("NFS: More fine grained attribute tracking") Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/nfs/inode.c | 14 +++++++++++--- include/linux/nfs_fs.h | 1 + 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index e4cd3a2fe698..5d8e0eb0d663 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -822,6 +822,8 @@ int nfs_getattr(const struct path *path, struct kstat *stat, do_update |= cache_validity & NFS_INO_INVALID_ATIME; if (request_mask & (STATX_CTIME|STATX_MTIME)) do_update |= cache_validity & NFS_INO_REVAL_PAGECACHE; + if (request_mask & STATX_BLOCKS) + do_update |= cache_validity & NFS_INO_INVALID_BLOCKS; if (do_update) { /* Update the attribute cache */ if (!(server->flags & NFS_MOUNT_NOAC)) @@ -1741,7 +1743,8 @@ int nfs_post_op_update_inode_force_wcc_locked(struct inode *inode, struct nfs_fa status = nfs_post_op_update_inode_locked(inode, fattr, NFS_INO_INVALID_CHANGE | NFS_INO_INVALID_CTIME - | NFS_INO_INVALID_MTIME); + | NFS_INO_INVALID_MTIME + | NFS_INO_INVALID_BLOCKS); return status; } @@ -1851,7 +1854,8 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) nfsi->cache_validity &= ~(NFS_INO_INVALID_ATTR | NFS_INO_INVALID_ATIME | NFS_INO_REVAL_FORCED - | NFS_INO_REVAL_PAGECACHE); + | NFS_INO_REVAL_PAGECACHE + | NFS_INO_INVALID_BLOCKS); /* Do atomic weak cache consistency updates */ nfs_wcc_update_inode(inode, fattr); @@ -2012,8 +2016,12 @@ static int nfs_update_inode(struct inode *inode, struct nfs_fattr *fattr) inode->i_blocks = nfs_calc_block_size(fattr->du.nfs3.used); } else if (fattr->valid & NFS_ATTR_FATTR_BLOCKS_USED) inode->i_blocks = fattr->du.nfs2.blocks; - else + else { + nfsi->cache_validity |= save_cache_validity & + (NFS_INO_INVALID_BLOCKS + | NFS_INO_REVAL_FORCED); cache_revalidated = false; + } /* Update attrtimeo value if we're out of the unstable period */ if (attr_changed) { diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index a0831e9d19c9..620306b1604d 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -221,6 +221,7 @@ struct nfs4_copy_state { #define NFS_INO_INVALID_MTIME BIT(10) /* cached mtime is invalid */ #define NFS_INO_INVALID_SIZE BIT(11) /* cached size is invalid */ #define NFS_INO_INVALID_OTHER BIT(12) /* other attrs are invalid */ +#define NFS_INO_INVALID_BLOCKS BIT(14) /* cached blocks are invalid */ #define NFS_INO_INVALID_ATTR (NFS_INO_INVALID_CHANGE \ | NFS_INO_INVALID_CTIME \ -- 2.25.1

1 0

[PATCH 1/4] xfs: fix inode fork extent count overflow
by Yang Yingliang 16 Jun '20

16 Jun '20

From: Dave Chinner <dchinner(a)redhat.com> mainline inclusion from mainline-5.5-rc1 commit 3f8a4f1d876d3e3e49e50b0396eaffcc4ba71b08 category: bugfix bugzilla: 26723 CVE: NA --------------------------- [commit message is verbose for discussion purposes - will trim it down later. Some questions about implementation details at the end.] Zorro Lang recently ran a new test to stress single inode extent counts now that they are no longer limited by memory allocation. The test was simply: This test uncovered a problem where the hole punching operation appeared to finish with no error, but apparently only created 268M extents instead of the 10 billion it was supposed to. Further, trying to punch out extents that should have been present resulted in success, but no change in the extent count. It looked like a silent failure. While running the test and observing the behaviour in real time, I observed the extent coutn growing at ~2M extents/minute, and saw this after about an hour: > sleep 60 ; \ > xfs_io -f -c "stat" /mnt/scratch/big-file |grep next fsxattr.nextents = 127657993 fsxattr.nextents = 129683339 And a few minutes later this: fsxattr.nextents = 4177861124 Ah, what? Where did that 4 billion extra extents suddenly come from? Stop the workload, unmount, mount: fsxattr.nextents = 166044375 And it's back at the expected number. i.e. the extent count is correct on disk, but it's screwed up in memory. I loaded up the extent list, and immediately: fsxattr.nextents = 4192576215 It's bad again. So, where does that number come from? xfs_fill_fsxattr(): if (ip->i_df.if_flags & XFS_IFEXTENTS) fa->fsx_nextents = xfs_iext_count(&ip->i_df); else fa->fsx_nextents = ip->i_d.di_nextents; And that's the behaviour I just saw in a nutshell. The on disk count is correct, but once the tree is loaded into memory, it goes whacky. Clearly there's something wrong with xfs_iext_count(): inline xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp) { return ifp->if_bytes / sizeof(struct xfs_iext_rec); } Simple enough, but 134M extents is 2**27, and that's right about where things went wrong. A struct xfs_iext_rec is 16 bytes in size, which means 2**27 * 2**4 = 2**31 and we're right on target for an integer overflow. And, sure enough: struct xfs_ifork { int if_bytes; /* bytes in if_u1 */ .... Once we get 2**27 extents in a file, we overflow if_bytes and the in-core extent count goes wrong. And when we reach 2**28 extents, if_bytes wraps back to zero and things really start to go wrong there. This is where the silent failure comes from - only the first 2**28 extents can be looked up directly due to the overflow, all the extents above this index wrap back to somewhere in the first 2**28 extents. Hence with a regular pattern, trying to punch a hole in the range that didn't have holes mapped to a hole in the first 2**28 extents and so "succeeded" without changing anything. Hence "silent failure"... Fix this by converting if_bytes to a int64_t and converting all the index variables and size calculations to use int64_t types to avoid overflows in future. Signed integers are still used to enable easy detection of extent count underflows. This enables scalability of extent counts to the limits of the on-disk format - MAXEXTNUM (2**31) extents. Current testing is at over 500M extents and still going: fsxattr.nextents = 517310478 Reported-by: Zorro Lang <zlang(a)redhat.com> Signed-off-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Conflict: fs/xfs/libxfs/xfs_inode_fork.h Signed-off-by: yu kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_attr_leaf.c | 18 ++++++++++-------- fs/xfs/libxfs/xfs_dir2_sf.c | 2 +- fs/xfs/libxfs/xfs_iext_tree.c | 2 +- fs/xfs/libxfs/xfs_inode_fork.c | 8 ++++---- fs/xfs/libxfs/xfs_inode_fork.h | 14 ++++++++------ 5 files changed, 24 insertions(+), 20 deletions(-) diff --git a/fs/xfs/libxfs/xfs_attr_leaf.c b/fs/xfs/libxfs/xfs_attr_leaf.c index 2652d00842d6..ceb9b0045725 100644 --- a/fs/xfs/libxfs/xfs_attr_leaf.c +++ b/fs/xfs/libxfs/xfs_attr_leaf.c @@ -421,13 +421,15 @@ xfs_attr_namesp_match(int arg_flags, int ondisk_flags) * special case for dev/uuid inodes, they have fixed size data forks. */ int -xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) +xfs_attr_shortform_bytesfit( + struct xfs_inode *dp, + int bytes) { - int offset; - int minforkoff; /* lower limit on valid forkoff locations */ - int maxforkoff; /* upper limit on valid forkoff locations */ - int dsize; - xfs_mount_t *mp = dp->i_mount; + struct xfs_mount *mp = dp->i_mount; + int64_t dsize; + int minforkoff; + int maxforkoff; + int offset; /* rounded down */ offset = (XFS_LITINO(mp, dp->i_d.di_version) - bytes) >> 3; @@ -493,7 +495,7 @@ xfs_attr_shortform_bytesfit(xfs_inode_t *dp, int bytes) * A data fork btree root must have space for at least * MINDBTPTRS key/ptr pairs if the data fork is small or empty. */ - minforkoff = max(dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS)); + minforkoff = max_t(int64_t, dsize, XFS_BMDR_SPACE_CALC(MINDBTPTRS)); minforkoff = roundup(minforkoff, 8) >> 3; /* attr fork btree root can have at least this many key/ptr pairs */ @@ -913,7 +915,7 @@ xfs_attr_shortform_verify( char *endp; struct xfs_ifork *ifp; int i; - int size; + int64_t size; ASSERT(ip->i_d.di_aformat == XFS_DINODE_FMT_LOCAL); ifp = XFS_IFORK_PTR(ip, XFS_ATTR_FORK); diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index 716c8c50f8bc..e126446a9484 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -653,7 +653,7 @@ xfs_dir2_sf_verify( int i; int i8count; int offset; - int size; + int64_t size; int error; uint8_t filetype; diff --git a/fs/xfs/libxfs/xfs_iext_tree.c b/fs/xfs/libxfs/xfs_iext_tree.c index 771dd072015d..22beaab8f9b4 100644 --- a/fs/xfs/libxfs/xfs_iext_tree.c +++ b/fs/xfs/libxfs/xfs_iext_tree.c @@ -600,7 +600,7 @@ xfs_iext_realloc_root( struct xfs_ifork *ifp, struct xfs_iext_cursor *cur) { - size_t new_size = ifp->if_bytes + sizeof(struct xfs_iext_rec); + int64_t new_size = ifp->if_bytes + sizeof(struct xfs_iext_rec); void *new; /* account for the prev/next pointers */ diff --git a/fs/xfs/libxfs/xfs_inode_fork.c b/fs/xfs/libxfs/xfs_inode_fork.c index f9acf1d436f6..80aa0f1a04dd 100644 --- a/fs/xfs/libxfs/xfs_inode_fork.c +++ b/fs/xfs/libxfs/xfs_inode_fork.c @@ -131,7 +131,7 @@ xfs_init_local_fork( struct xfs_inode *ip, int whichfork, const void *data, - int size) + int64_t size) { struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, whichfork); int mem_size = size, real_size = 0; @@ -469,11 +469,11 @@ xfs_iroot_realloc( void xfs_idata_realloc( struct xfs_inode *ip, - int byte_diff, + int64_t byte_diff, int whichfork) { struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, whichfork); - int new_size = (int)ifp->if_bytes + byte_diff; + int64_t new_size = ifp->if_bytes + byte_diff; ASSERT(new_size >= 0); ASSERT(new_size <= XFS_IFORK_SIZE(ip, whichfork)); @@ -554,7 +554,7 @@ xfs_iextents_copy( struct xfs_ifork *ifp = XFS_IFORK_PTR(ip, whichfork); struct xfs_iext_cursor icur; struct xfs_bmbt_irec rec; - int copied = 0; + int64_t copied = 0; ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL | XFS_ILOCK_SHARED)); ASSERT(ifp->if_bytes > 0); diff --git a/fs/xfs/libxfs/xfs_inode_fork.h b/fs/xfs/libxfs/xfs_inode_fork.h index 60361d2d74a1..09e3548afdde 100644 --- a/fs/xfs/libxfs/xfs_inode_fork.h +++ b/fs/xfs/libxfs/xfs_inode_fork.h @@ -13,16 +13,16 @@ struct xfs_dinode; * File incore extent information, present for each of data & attr forks. */ struct xfs_ifork { - int if_bytes; /* bytes in if_u1 */ - unsigned int if_seq; /* cow fork mod counter */ + int64_t if_bytes; /* bytes in if_u1 */ struct xfs_btree_block *if_broot; /* file's incore btree root */ - short if_broot_bytes; /* bytes allocated for root */ - unsigned char if_flags; /* per-fork flags */ + unsigned int if_seq; /* cow fork mod counter */ int if_height; /* height of the extent tree */ union { void *if_root; /* extent tree root */ char *if_data; /* inline file data */ } if_u1; + short if_broot_bytes; /* bytes allocated for root */ + unsigned char if_flags; /* per-fork flags */ }; /* @@ -93,12 +93,14 @@ int xfs_iformat_fork(struct xfs_inode *, struct xfs_dinode *); void xfs_iflush_fork(struct xfs_inode *, struct xfs_dinode *, struct xfs_inode_log_item *, int); void xfs_idestroy_fork(struct xfs_inode *, int); -void xfs_idata_realloc(struct xfs_inode *, int, int); +void xfs_idata_realloc(struct xfs_inode *ip, int64_t byte_diff, + int whichfork); void xfs_iroot_realloc(struct xfs_inode *, int, int); int xfs_iread_extents(struct xfs_trans *, struct xfs_inode *, int); int xfs_iextents_copy(struct xfs_inode *, struct xfs_bmbt_rec *, int); -void xfs_init_local_fork(struct xfs_inode *, int, const void *, int); +void xfs_init_local_fork(struct xfs_inode *ip, int whichfork, + const void *data, int64_t size); xfs_extnum_t xfs_iext_count(struct xfs_ifork *ifp); void xfs_iext_insert(struct xfs_inode *, struct xfs_iext_cursor *cur, -- 2.25.1

1 3

[PATCH] signal: Export tracepoint symbol signal_generate
by Yang Yingliang 15 Jun '20

15 Jun '20

From: Tang Yizhou <tangyizhou(a)huawei.com> hulk inclusion category: feature bugzilla: 37631 CVE: NA ------------------------------------------------- To support signal monitoring, we need to export the defined tracepoint signal_generate so that it can be used in kernel modules. Signed-off-by: Tang Yizhou <tangyizhou(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/signal.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/kernel/signal.c b/kernel/signal.c index 718f22da0305..091a3a313410 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -52,6 +52,8 @@ #include <asm/cacheflush.h> #include "audit.h" /* audit_signal_info() */ +EXPORT_TRACEPOINT_SYMBOL(signal_generate); + /* * SLAB caches for signal bits. */ -- 2.25.1

1 0

[PATCH 1/2] perf/x86: Make perf callchains work without CONFIG_FRAME_POINTER
by Yang Yingliang 15 Jun '20

15 Jun '20

From: Kairui Song <kasong(a)redhat.com> mainline inclusion from mainline-5.2-rc1 commit d15d356887e7 category: bugfix bugzilla: 35738 CVE: NA ------------------------------------------------- Currently perf callchain doesn't work well with ORC unwinder when sampling from trace point. We'll get useless in kernel callchain like this: perf 6429 [000] 22.498450: kmem:mm_page_alloc: page=0x176a17 pfn=1534487 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffbe23e32e __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) 7efdf7f7d3e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 5651468729c1 [unknown] (/usr/bin/perf) 5651467ee82a main+0x69a (/usr/bin/perf) 7efdf7eaf413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) The root cause is that, for trace point events, it doesn't provide a real snapshot of the hardware registers. Instead perf tries to get required caller's registers and compose a fake register snapshot which suppose to contain enough information for start a unwinding. However without CONFIG_FRAME_POINTER, if failed to get caller's BP as the frame pointer, so current frame pointer is returned instead. We get a invalid register combination which confuse the unwinder, and end the stacktrace early. So in such case just don't try dump BP, and let the unwinder start directly when the register is not a real snapshot. Use SP as the skip mark, unwinder will skip all the frames until it meet the frame of the trace point caller. Tested with frame pointer unwinder and ORC unwinder, this makes perf callchain get the full kernel space stacktrace again like this: perf 6503 [000] 1567.570191: kmem:mm_page_alloc: page=0x16c904 pfn=1493252 order=0 migratetype=0 gfp_flags=GFP_KERNEL ffffffffb523e2ae __alloc_pages_nodemask+0x22e (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52383bd __get_free_pages+0xd (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fd28a __pollwait+0x8a (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb521426f perf_poll+0x2f (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52fe3e2 do_sys_poll+0x252 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb52ff027 __x64_sys_poll+0x37 (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb500418b do_syscall_64+0x5b (/lib/modules/5.1.0-rc3+/build/vmlinux) ffffffffb5a0008c entry_SYSCALL_64_after_hwframe+0x44 (/lib/modules/5.1.0-rc3+/build/vmlinux) 7f71e92d03e8 __poll+0x18 (/usr/lib64/libc-2.28.so) 55a22960d9c1 [unknown] (/usr/bin/perf) 55a22958982a main+0x69a (/usr/bin/perf) 7f71e9202413 __libc_start_main+0xf3 (/usr/lib64/libc-2.28.so) 5541f689495641d7 [unknown] ([unknown]) Co-developed-by: Josh Poimboeuf <jpoimboe(a)redhat.com> Signed-off-by: Kairui Song <kasong(a)redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov(a)gmail.com> Cc: Arnaldo Carvalho de Melo <acme(a)kernel.org> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Dave Young <dyoung(a)redhat.com> Cc: Jiri Olsa <jolsa(a)redhat.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Namhyung Kim <namhyung(a)kernel.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Link: https://lkml.kernel.org/r/20190422162652.15483-1-kasong@redhat.com Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/events/core.c | 21 +++++++++++++++++---- arch/x86/include/asm/perf_event.h | 7 +------ arch/x86/include/asm/stacktrace.h | 13 ------------- include/linux/perf_event.h | 14 ++++++++++---- 4 files changed, 28 insertions(+), 27 deletions(-) diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c index c89e6c6e26f6..0a6b48afeb05 100644 --- a/arch/x86/events/core.c +++ b/arch/x86/events/core.c @@ -2332,6 +2332,15 @@ void arch_perf_update_userpage(struct perf_event *event, cyc2ns_read_end(); } +/* + * Determine whether the regs were taken from an irq/exception handler rather + * than from perf_arch_fetch_caller_regs(). + */ +static bool perf_hw_regs(struct pt_regs *regs) +{ + return regs->flags & X86_EFLAGS_FIXED; +} + void perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *regs) { @@ -2343,11 +2352,15 @@ perf_callchain_kernel(struct perf_callchain_entry_ctx *entry, struct pt_regs *re return; } - if (perf_callchain_store(entry, regs->ip)) - return; + if (perf_hw_regs(regs)) { + if (perf_callchain_store(entry, regs->ip)) + return; + unwind_start(&state, current, regs, NULL); + } else { + unwind_start(&state, current, NULL, (void *)regs->sp); + } - for (unwind_start(&state, current, regs, NULL); !unwind_done(&state); - unwind_next_frame(&state)) { + for (; !unwind_done(&state); unwind_next_frame(&state)) { addr = unwind_get_return_address(&state); if (!addr || perf_callchain_store(entry, addr)) return; diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h index f6c4915a863e..620c3e3564be 100644 --- a/arch/x86/include/asm/perf_event.h +++ b/arch/x86/include/asm/perf_event.h @@ -264,14 +264,9 @@ extern unsigned long perf_misc_flags(struct pt_regs *regs); */ #define perf_arch_fetch_caller_regs(regs, __ip) { \ (regs)->ip = (__ip); \ - (regs)->bp = caller_frame_pointer(); \ + (regs)->sp = (unsigned long)__builtin_frame_address(0); \ (regs)->cs = __KERNEL_CS; \ regs->flags = 0; \ - asm volatile( \ - _ASM_MOV "%%"_ASM_SP ", %0\n" \ - : "=m" ((regs)->sp) \ - :: "memory" \ - ); \ } struct perf_guest_switch_msr { diff --git a/arch/x86/include/asm/stacktrace.h b/arch/x86/include/asm/stacktrace.h index f335aad404a4..beef7ad9e43a 100644 --- a/arch/x86/include/asm/stacktrace.h +++ b/arch/x86/include/asm/stacktrace.h @@ -98,19 +98,6 @@ struct stack_frame_ia32 { u32 return_address; }; -static inline unsigned long caller_frame_pointer(void) -{ - struct stack_frame *frame; - - frame = __builtin_frame_address(0); - -#ifdef CONFIG_FRAME_POINTER - frame = frame->next_frame; -#endif - - return (unsigned long)frame; -} - void show_opcodes(struct pt_regs *regs, const char *loglvl); void show_ip(struct pt_regs *regs, const char *loglvl); #endif /* _ASM_X86_STACKTRACE_H */ diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index d8b4d31acd18..cf3da70056f7 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1050,12 +1050,18 @@ static inline void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned lo #endif /* - * Take a snapshot of the regs. Skip ip and frame pointer to - * the nth caller. We only need a few of the regs: + * When generating a perf sample in-line, instead of from an interrupt / + * exception, we lack a pt_regs. This is typically used from software events + * like: SW_CONTEXT_SWITCHES, SW_MIGRATIONS and the tie-in with tracepoints. + * + * We typically don't need a full set, but (for x86) do require: * - ip for PERF_SAMPLE_IP * - cs for user_mode() tests - * - bp for callchains - * - eflags, for future purposes, just in case + * - sp for PERF_SAMPLE_CALLCHAIN + * - eflags for MISC bits and CALLCHAIN (see: perf_hw_regs()) + * + * NOTE: assumes @regs is otherwise already 0 filled; this is important for + * things like PERF_SAMPLE_REGS_INTR. */ static inline void perf_fetch_caller_regs(struct pt_regs *regs) { -- 2.25.1

1 1

[PATCH] ext4: stop overwrite the errcode in ext4_setup_super
by Yang Yingliang 15 Jun '20

15 Jun '20

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: 35487 CVE: NA ----------------------------------------------- Now the errcode from ext4_commit_super will overwrite EROFS exists in ext4_setup_super. Actually, no need to call ext4_commit_super since we will return EROFS. Fix it by goto done directly. Fixes: c89128a00838 ("ext4: handle errors on ext4_commit_super") Signed-off-by: yangerkun <yangerkun(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/super.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index cc057001961e..b10f96860dd8 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2305,6 +2305,7 @@ static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es, ext4_msg(sb, KERN_ERR, "revision level too high, " "forcing read-only mode"); err = -EROFS; + goto done; } if (read_only) goto done; -- 2.25.1

1 0

[PATCH] panic/printk: fix zap_lock
by Yang Yingliang 15 Jun '20

15 Jun '20

From: Cheng Jian <cj.chengjian(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34546 CVE: NA ---------------------------------------- There are two problems with the implementation and use of zap_lock(). Firstly, This console_sem does not require reinit in zap_lock(), this is because: 1). printk() itself does try_lock() and skips console handling when the semaphore is not available. 2). panic() tries to push the messages later in console_flush_on_panic(). It ignores the semaphore. Also most console drivers ignore their internal locks because oops_in_progress is set by bust_spinlocks(). Secondly, The situation is more complicated when NMI is not used. 1). Non-stopped CPUs are in unknown state, most likely in a busy loop. Nobody knows whether printk() is repeatedly called in the loop. When it was called, re-initializing any lock would cause double unlock and deadlock. 2). It would be possible to add some more hacks. One problem is that there are two groups of users. One prefer to risk a deadlock and have a chance to see the messages. Others prefer to always reach emergency_restart() and reboot the machine. Fixes: b15f5676d00e ("printk/panic: Avoid deadlock in printk()") Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/panic.c | 25 +++++++++++++++++++++++++ kernel/printk/printk.c | 3 --- 2 files changed, 25 insertions(+), 3 deletions(-) diff --git a/kernel/panic.c b/kernel/panic.c index 9434f6c2da9e..ebdb58e761c0 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -238,7 +238,32 @@ void panic(const char *fmt, ...) crash_smp_send_stop(); } + /* + * ZAP console related locks when nmi broadcast. If a crash is occurring, + * make sure we can't deadlock. And make sure that we print immediately. + * + * A deadlock caused by logbuf_lock can be occured when panic: + * a) Panic CPU is running in non-NMI context; + * b) Panic CPU sends out shutdown IPI via NMI vector; + * c) One of the CPUs that we bring down via NMI vector holded logbuf_lock; + * d) Panic CPU try to hold logbuf_lock, then deadlock occurs. + * + * At present, only try to solve this problem for the ARCH with NMI, + * by reinit lock, this situation is more complicated when NMI is not + * used. + * 1). Non-stopped CPUs are in unknown state, most likely in a busy loop. + * Nobody knows whether printk() is repeatedly called in the loop. + * When it was called, re-initializing any lock would cause double + * unlock and deadlock. + * + * 2). It would be possible to add some more hacks. One problem is that + * there are two groups of users. One prefer to risk a deadlock and + * have a chance to see the messages. Others prefer to always + * reach emergency_restart() and reboot the machine. + */ +#ifdef CONFIG_X86 zap_locks(); +#endif /* * Run any panic handlers, including those that might need to diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 7225f5ef0f54..f67b6a1c8f74 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -1592,9 +1592,6 @@ void zap_locks(void) if (raw_spin_is_locked(&logbuf_lock)) { debug_locks_off(); raw_spin_lock_init(&logbuf_lock); - - console_suspended = 1; - sema_init(&console_sem, 1); } if (raw_spin_is_locked(&console_owner_lock)) { -- 2.25.1

1 0

[PATCH 1/3] net: hns3: add device name valid check
by Yang Yingliang 15 Jun '20

15 Jun '20

From: Junxin Chen <chenjunxin1(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA ---------------------------------- Nowadays, we have checked device name at user tool, and have limited length of device name at kernel driver. But when get_netdev_by_ifname return NULL, it would cause print device name without check terminator. This patch fixes this bug, when device name's last character isn't a '\0', kernel driver would return -EINVAL to user. Signed-off-by: Junxin Chen <chenjunxin1(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Shengzui You <youshengzui(a)huawei.com> Reviewed-by: Zhaohui Zhong <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_init.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_init.c b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_init.c index 7c084a6fbe18..1e012917e010 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_init.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_init.c @@ -335,6 +335,11 @@ static long hns3_cae_k_unlocked_ioctl(struct file *pfile, unsigned int cmd, * code yet, so we don't need lock. */ rtnl_lock(); + if (nt_msg.device_name[IFNAMSIZ - 1] != '\0') { + pr_err("the device name is invalid.\n"); + ret = -EINVAL; + goto out_invalid; + } ret = hns3_cae_k_get_netdev_by_ifname(nt_msg.device_name, &nic_dev); if (ret) { pr_err("can not get the netdevice correctly\n"); -- 2.25.1

1 2

[PATCH] netdevsim: Fix error handling in nsim_fib_init and nsim_fib_exit
by liaichun 15 Jun '20

15 Jun '20

From: YueHaibing <yuehaibing(a)huawei.com> mainline inclusion from mainline-5.4 commit 33902b4a4227877896dd9368ac10f4ca0d100de5 category: bugfix issue: I1JZHT bugzilla: NA ------------------------------ In nsim_fib_init(), if register_fib_notifier failed, nsim_fib_net_ops should be unregistered before return. In nsim_fib_exit(), unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free: BUG: KASAN: use-after-free in nsim_fib_event_nb+0x342/0x570 [netdevsim] Read of size 8 at addr ffff8881daaf4388 by task kworker/0:3/3499 CPU: 0 PID: 3499 Comm: kworker/0:3 Not tainted 5.3.0-rc7+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work [ipv6] Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 print_address_description+0x65/0x380 mm/kasan/report.c:351 __kasan_report+0x149/0x18d mm/kasan/report.c:482 kasan_report+0xe/0x20 mm/kasan/common.c:618 nsim_fib_event_nb+0x342/0x570 [netdevsim] notifier_call_chain+0x52/0xf0 kernel/notifier.c:95 __atomic_notifier_call_chain+0x78/0x140 kernel/notifier.c:185 call_fib_notifiers+0x30/0x60 net/core/fib_notifier.c:30 call_fib6_entry_notifiers+0xc1/0x100 [ipv6] fib6_add+0x92e/0x1b10 [ipv6] __ip6_ins_rt+0x40/0x60 [ipv6] ip6_ins_rt+0x84/0xb0 [ipv6] __ipv6_ifa_notify+0x4b6/0x550 [ipv6] ipv6_ifa_notify+0xa5/0x180 [ipv6] addrconf_dad_completed+0xca/0x640 [ipv6] addrconf_dad_work+0x296/0x960 [ipv6] process_one_work+0x5c0/0xc00 kernel/workqueue.c:2269 worker_thread+0x5c/0x670 kernel/workqueue.c:2415 kthread+0x1d7/0x200 kernel/kthread.c:255 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Allocated by task 3388: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_kmalloc.constprop.3+0xa0/0xd0 mm/kasan/common.c:493 kmalloc include/linux/slab.h:557 [inline] kzalloc include/linux/slab.h:748 [inline] ops_init+0xa9/0x220 net/core/net_namespace.c:127 __register_pernet_operations net/core/net_namespace.c:1135 [inline] register_pernet_operations+0x1d4/0x420 net/core/net_namespace.c:1212 register_pernet_subsys+0x24/0x40 net/core/net_namespace.c:1253 nsim_fib_init+0x12/0x70 [netdevsim] veth_get_link_ksettings+0x2b/0x50 [veth] do_one_initcall+0xd4/0x454 init/main.c:939 do_init_module+0xe0/0x330 kernel/module.c:3490 load_module+0x3c2f/0x4620 kernel/module.c:3841 __do_sys_finit_module+0x163/0x190 kernel/module.c:3931 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 3534: save_stack+0x19/0x80 mm/kasan/common.c:69 set_track mm/kasan/common.c:77 [inline] __kasan_slab_free+0x130/0x180 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1423 [inline] slab_free_freelist_hook mm/slub.c:1474 [inline] slab_free mm/slub.c:3016 [inline] kfree+0xe9/0x2d0 mm/slub.c:3957 ops_free net/core/net_namespace.c:151 [inline] ops_free_list.part.7+0x156/0x220 net/core/net_namespace.c:184 ops_free_list net/core/net_namespace.c:182 [inline] __unregister_pernet_operations net/core/net_namespace.c:1165 [inline] unregister_pernet_operations+0x221/0x2a0 net/core/net_namespace.c:1224 unregister_pernet_subsys+0x1d/0x30 net/core/net_namespace.c:1271 nsim_fib_exit+0x11/0x20 [netdevsim] nsim_module_exit+0x16/0x21 [netdevsim] __do_sys_delete_module kernel/module.c:1015 [inline] __se_sys_delete_module kernel/module.c:958 [inline] __x64_sys_delete_module+0x244/0x330 kernel/module.c:958 do_syscall_64+0x72/0x2e0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reported-by: Hulk Robot <hulkci(a)huawei.com> Fixes: 59c84b9fcf42 ("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing(a)huawei.com> Acked-by: Jakub Kicinski <jakub.kicinski(a)netronome.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: LiAichun <liaichun(a)huawei.com> --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094746c0..1a251f76d09b 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static struct pernet_operations nsim_fib_net_ops = { void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -258,6 +258,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { pr_err("Failed to register fib notifier\n"); + unregister_pernet_subsys(&nsim_fib_net_ops); goto err_out; } -- 2.20.1

4 3

[PATCH] scsi: Fix kabi change due to add offline_already member in struct scsi_device
by Yang Yingliang 12 Jun '20

12 Jun '20

From: Ye Bin <yebin10(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34604 CVE: NA ----------------------------------------------- Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/scsi_lib.c | 4 ++-- include/scsi/scsi_device.h | 7 ++++--- 2 files changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index a8043039f53e..bdb90f5c9eeb 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1438,7 +1438,7 @@ scsi_prep_state_check(struct scsi_device *sdev, struct request *req) * before trying any recovery commands. */ if (!sdev->offline_already) { - sdev->offline_already = true; + sdev->offline_already = 1; sdev_printk(KERN_ERR, sdev, "rejecting I/O to offline device\n"); } @@ -2859,7 +2859,7 @@ scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) break; } - sdev->offline_already = false; + sdev->offline_already = 0; sdev->sdev_state = state; return 0; diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h index 52b255e868a9..550739a5ea96 100644 --- a/include/scsi/scsi_device.h +++ b/include/scsi/scsi_device.h @@ -201,8 +201,6 @@ struct scsi_device { unsigned lun_in_cdb:1; /* Store LUN bits in CDB[1] */ unsigned unmap_limit_for_ws:1; /* Use the UNMAP limit for WRITE SAME */ - bool offline_already; /* Device offline message logged */ - atomic_t disk_events_disable_depth; /* disable depth for disk events */ DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */ @@ -230,8 +228,11 @@ struct scsi_device { struct mutex state_mutex; enum scsi_device_state sdev_state; struct task_struct *quiesced_by; - +#ifndef __GENKSYMS__ + unsigned long offline_already; /* Device offline message logged */ +#else KABI_RESERVE(1) +#endif KABI_RESERVE(2) KABI_RESERVE(3) KABI_RESERVE(4) -- 2.25.1

1 0

[PATCH] ALSA: proc: Avoid possible leaks of snd_info_entry objects
by Yang Yingliang 12 Jun '20

12 Jun '20

From: Takashi Iwai <tiwai(a)suse.de> mainline inclusion from mainline-v5.1-rc1 commit 3a55437141a1d287dead685b37fe240185144f15 category: bugfix bugzilla: 34614 CVE: NA ----------------------------------------------- This patch changes the parent pointer assignment of snd_info_entry object to be always non-NULL. More specifically,check the parent argument in snd_info_create_module_entry() & co, and assign snd_proc_root if NULL is passed there. This assures that the proc object is always freed when the root is freed, so avoid possible memory leaks. For example, some error paths (e.g. snd_info_register() error at snd_minor_info_init()) may leave snd_info_entry object although the proc file itself is freed. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- sound/core/info.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/sound/core/info.c b/sound/core/info.c index 679136fba730..3411bea54d66 100644 --- a/sound/core/info.c +++ b/sound/core/info.c @@ -744,7 +744,11 @@ struct snd_info_entry *snd_info_create_module_entry(struct module * module, const char *name, struct snd_info_entry *parent) { - struct snd_info_entry *entry = snd_info_create_entry(name, parent); + struct snd_info_entry *entry; + + if (!parent) + parent = snd_proc_root; + entry = snd_info_create_entry(name, parent); if (entry) entry->module = module; return entry; @@ -765,7 +769,11 @@ struct snd_info_entry *snd_info_create_card_entry(struct snd_card *card, const char *name, struct snd_info_entry * parent) { - struct snd_info_entry *entry = snd_info_create_entry(name, parent); + struct snd_info_entry *entry; + + if (!parent) + parent = card->proc_root; + entry = snd_info_create_entry(name, parent); if (entry) { entry->module = card->module; entry->card = card; -- 2.25.1

1 0

[PATCH 01/12] jbd2: clean __jbd2_journal_abort_hard() and __journal_abort_soft()
by Yang Yingliang 12 Jun '20

12 Jun '20

From: "zhangyi (F)" <yi.zhang(a)huawei.com> mainline inclusion from mainline-5.6-rc1 commit 7f6225e446cc8dfa4c3c7959a4de3dd03ec277bf category: bugfix bugzilla: 34619 CVE: NA --------------------------- __jbd2_journal_abort_hard() is no longer used, so now we can merge __jbd2_journal_abort_hard() and __journal_abort_soft() these two functions into jbd2_journal_abort() and remove them. Signed-off-by: zhangyi (F) <yi.zhang(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20191204124614.45424-5-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/jbd2/journal.c | 103 ++++++++++++++++++------------------------- include/linux/jbd2.h | 1 - 2 files changed, 42 insertions(+), 62 deletions(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index 1f085f0bf908..7301bb766172 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -101,7 +101,6 @@ EXPORT_SYMBOL(jbd2_journal_release_jbd_inode); EXPORT_SYMBOL(jbd2_journal_begin_ordered_truncate); EXPORT_SYMBOL(jbd2_inode_cache); -static void __journal_abort_soft (journal_t *journal, int errno); static int jbd2_journal_create_slab(size_t slab_size); #ifdef CONFIG_JBD2_DEBUG @@ -810,7 +809,7 @@ int jbd2_journal_bmap(journal_t *journal, unsigned long blocknr, "at offset %lu on %s\n", __func__, blocknr, journal->j_devname); err = -EIO; - __journal_abort_soft(journal, err); + jbd2_journal_abort(journal, err); } } else { *retp = blocknr; /* +journal->j_blk_offset */ @@ -2108,64 +2107,6 @@ int jbd2_journal_wipe(journal_t *journal, int write) return err; } -/* - * Journal abort has very specific semantics, which we describe - * for journal abort. - * - * Two internal functions, which provide abort to the jbd layer - * itself are here. - */ - -/* - * Quick version for internal journal use (doesn't lock the journal). - * Aborts hard --- we mark the abort as occurred, but do _nothing_ else, - * and don't attempt to make any other journal updates. - */ -void __jbd2_journal_abort_hard(journal_t *journal) -{ - transaction_t *transaction; - - if (journal->j_flags & JBD2_ABORT) - return; - - printk(KERN_ERR "Aborting journal on device %s.\n", - journal->j_devname); - - write_lock(&journal->j_state_lock); - journal->j_flags |= JBD2_ABORT; - transaction = journal->j_running_transaction; - if (transaction) - __jbd2_log_start_commit(journal, transaction->t_tid); - write_unlock(&journal->j_state_lock); -} - -/* Soft abort: record the abort error status in the journal superblock, - * but don't do any other IO. */ -static void __journal_abort_soft (journal_t *journal, int errno) -{ - int old_errno; - - write_lock(&journal->j_state_lock); - old_errno = journal->j_errno; - if (!journal->j_errno || errno == -ESHUTDOWN) - journal->j_errno = errno; - - if (journal->j_flags & JBD2_ABORT) { - write_unlock(&journal->j_state_lock); - if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN) - jbd2_journal_update_sb_errno(journal); - return; - } - write_unlock(&journal->j_state_lock); - - __jbd2_journal_abort_hard(journal); - - jbd2_journal_update_sb_errno(journal); - write_lock(&journal->j_state_lock); - journal->j_flags |= JBD2_REC_ERR; - write_unlock(&journal->j_state_lock); -} - /** * void jbd2_journal_abort () - Shutdown the journal immediately. * @journal: the journal to shutdown. @@ -2209,7 +2150,47 @@ static void __journal_abort_soft (journal_t *journal, int errno) void jbd2_journal_abort(journal_t *journal, int errno) { - __journal_abort_soft(journal, errno); + transaction_t *transaction; + + /* + * ESHUTDOWN always takes precedence because a file system check + * caused by any other journal abort error is not required after + * a shutdown triggered. + */ + write_lock(&journal->j_state_lock); + if (journal->j_flags & JBD2_ABORT) { + int old_errno = journal->j_errno; + + write_unlock(&journal->j_state_lock); + if (old_errno != -ESHUTDOWN && errno == -ESHUTDOWN) { + journal->j_errno = errno; + jbd2_journal_update_sb_errno(journal); + } + return; + } + + /* + * Mark the abort as occurred and start current running transaction + * to release all journaled buffer. + */ + pr_err("Aborting journal on device %s.\n", journal->j_devname); + + journal->j_flags |= JBD2_ABORT; + journal->j_errno = errno; + transaction = journal->j_running_transaction; + if (transaction) + __jbd2_log_start_commit(journal, transaction->t_tid); + write_unlock(&journal->j_state_lock); + + /* + * Record errno to the journal super block, so that fsck and jbd2 + * layer could realise that a filesystem check is needed. + */ + jbd2_journal_update_sb_errno(journal); + + write_lock(&journal->j_state_lock); + journal->j_flags |= JBD2_REC_ERR; + write_unlock(&journal->j_state_lock); } /** diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 7dd9d25a9cbb..12b935c9ec1e 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1427,7 +1427,6 @@ extern int jbd2_journal_skip_recovery (journal_t *); extern void jbd2_journal_update_sb_errno(journal_t *); extern int jbd2_journal_update_sb_log_tail (journal_t *, tid_t, unsigned long, int); -extern void __jbd2_journal_abort_hard (journal_t *); extern void jbd2_journal_abort (journal_t *, int); extern int jbd2_journal_errno (journal_t *); extern void jbd2_journal_ack_err (journal_t *); -- 2.25.1

1 11

Minutes of the meeting //: 【Meeting Notice】Kernel & testing sync between Linaro and openEuler Time: 2020-06-10 16:00-17:30
by Guohanjun (Hanjun Guo) 11 Jun '20

11 Jun '20

Attendees (I can see more people join later but can’t remember now): [cid:image001.png@01D63F6C.270B2CF0] Following action items: * Vincent to share the JIRA link for thermal pressure * Vincent to share the JIRA link for scheduler improvements * Anmar to work on the opening of Power and Performance Project * Hanjun/Jonathan to share some plan for openEuler kernel in the coming 6 or 12 months * Anmar to create the open mailing list for LKQ project, so that Fengguang and the team can participate And see attached for Linaro slide, thanks! 发件人: Meeting Book via Kernel [mailto:kernel@openeuler.org] 发送时间: 2020年6月3日 16:01 收件人: kernel(a)openeuler.org 主题: 【Meeting Notice】Kernel & testing sync between Linaro and openEuler Time: 2020-06-10 16:00-17:30 Topic Kernel & testing sync between Linaro and openEuler Time 2020-06-10 16:00-17:30((UTC+08:00)Beijing) Join Conference Join (External) >><https://welink-meeting.zoom.us/j/834726983> Meeting ID 834 726 983 Convener 郭寒军 Agenda * Linux Kernel Update by Linaro - 15 mins * Linux Kernel Functional Testing (LKFT) introduction - 15mins * Brief introduction for openEuler and the kernel - 15mins * Brief introduction for Crystal testing system - 15 mins * Open discussions - about 30 mins Tips: Dial the access number to join conference<http://app.huawei.com/eshare/voiceMeetings> 注：仅支持部分国家和地区。( Only some countries and regions are supported.) 请点击会议链接按照提示下载Zoom客户端入会，并升级Zoom最新版本。 Please click the conference link and download the Zoom to join the conference, and upgrade to the latest version of Zoom.

2 1

[PATCH] irqchip/gic-v3-its: its supoport s3/s4
by Hongbo Yao 09 Jun '20

09 Jun '20

commit dba0bc7b76dcf(irqchip/gic-v3-its: add ability to save/restore ITS state) add support to save/restore its suspend state. However, it needs to set ITS_FLAGS_SAVE_SUSPEND_STATE to 1 when we want to resend MAPC. In GIC500, GITS_typer.HCC is not zero, and it can be used to judge if we can resend MAPC if the firmware restores the state, but when GITS_typer.HCC is zero, and it will never have chance to set the flag, which will lead to a failuer to power off GIC logic in suspend. Signed-off-by: Hongbo Yao <yaohongbo(a)huawei.com> --- drivers/irqchip/irq-gic-v3-its.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 881466163c99..6ea2809b8680 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -3733,8 +3733,7 @@ static int __init its_probe_one(struct resource *res, ctlr |= GITS_CTLR_ImDe; writel_relaxed(ctlr, its->base + GITS_CTLR); - if (GITS_TYPER_HCC(typer)) - its->flags |= ITS_FLAGS_SAVE_SUSPEND_STATE; + its->flags |= ITS_FLAGS_SAVE_SUSPEND_STATE; err = its_init_domain(handle, its); if (err) -- 2.20.1

1 0

(no subject)
by liaichun 09 Jun '20

09 Jun '20

From: LiAichun <liaichun(a)huawei.com> euleros inclusion commit NA category:bugfix bugzilla:NA CVE:NA issue:I1JZHT ------------------------------------------------- From:YueHaibing<> Subject: [PATCH] netdevsim: Fix error handling in nsim_fib_init and neim_fib_exit Date: Mon, 8 Jun 2020 15:13:40 +0800 In nsim_fib_init(),if register_fib_notifier failed,nsim_fib_net_ops should be unregistered before return; In nsim_fib_exit(),unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free More detailed information can refer to: https://lkml.org/lkml/2019/10/11/216 Reported-by:Hulk Robot <hulkci(a)huawei.com> Fixes: 59c84b9fcf42("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing(a)huawei.com> Signed-off-by: LiAichun <liaichun(a)huawei.com> --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

(no subject)
by liaichun 09 Jun '20

09 Jun '20

From: LiAichun <liaichun(a)huawei.com> euleros inclusion commit NA category:bugfix bugzilla:NA CVE:NA Fix issue:gitee.com/openeuler/kernel/issues/I1JZHT ------------------------------------------------- From:YueHaibing<> Subject: [PATCH] netdevsim: Fix error handling in nsim_fib_init and neim_fib_exit Date: Mon, 8 Jun 2020 15:13:40 +0800 In nsim_fib_init(),if register_fib_notifier failed,nsim_fib_net_ops should be unregistered before return; In nsim_fib_exit(),unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free More detailed information can refer to: https://lkml.org/lkml/2019/10/11/216 Reported-by:Hulk Robot <hulkci(a)huawei.com> Fixes: 59c84b9fcf42("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing(a)huawei.com> Signed-off-by: LiAichun <liaichun(a)huawei.com> --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

(no subject)
by liaichun 09 Jun '20

09 Jun '20

From: LiAichun <liaichun(a)huawei.com> mainline inclusion from mainline-4.19.90-2003.4.0 commit a91b7a28e76a702bd81357bf41a45dab6486716b category:bugfix bugzilla:NA CVE:NA ------------------------------------------------- From:YueHaibing<> Subject: [PATCH] netdevsim: Fix error handling in nsim_fib_init and neim_fib_exit Date: Mon, 8 Jun 2020 15:13:40 +0800 In nsim_fib_init(),if register_fib_notifier failed,nsim_fib_net_ops should be unregistered before return; In nsim_fib_exit(),unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free More detailed information can refer to: https://lkml.org/lkml/2019/10/11/216 Reported-by:Hulk Robot <hulkci(a)huawei.com> Fixes: 59c84b9fcf42("netdevsim: Restore per-network namespace accounting for fib entries") Signed-off-by: YueHaibing <yuehaibing(a)huawei.com> Signed-off-by: LiAichun <liaichun(a)huawei.com> --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

2 1

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 09 Jun '20

09 Jun '20

In nsim_fib_init(),if register_fib_notifier failed,nsim_fib_net_ops should be unregistered before return; In nsim_fib_exit(),unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free More detailed information can refer to: https://lkml.org/lkml/2019/10/11/216 kernel inclusion from:kernel-4.19 commit:2dca76fa95bf03c15bdcacd7cfa8f974c1a799f6 category:bugfix bugzilla:NA CVE:NA Signed-off-by: liaichun <513565428(a)qq.com> DESC:fix netdevsim resource leak --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

2 1

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

In nsim_fib_init(),if register_fib_notifier failed,nsim_fib_net_ops should be unregistered before return; In nsim_fib_exit(),unregister_fib_notifier should be called before nsim_fib_net_ops be unregistered, otherwise may cause use-after-free More detailed information can refer to: https://lkml.org/lkml/2019/10/11/216 Signed-off-by: liaichun <513565428(a)qq.com> Tested-by: liaichun <513565428(a)qq.com> Type:bugfix ID:NA SUG:restart DESC:fix netdevsim resource leak --- drivers/net/netdevsim/fib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

2 1

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

From: liaichun <liaichun(a)huawei.com> diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

From: liaichun <liaichun(a)huawei.com> diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

[PATCH] net-netdevsim-fix-resource-leak
by liaichun 08 Jun '20

08 Jun '20

diff --git a/drivers/net/netdevsim/fib.c b/drivers/net/netdevsim/fib.c index f61d094..d5c01b8 100644 --- a/drivers/net/netdevsim/fib.c +++ b/drivers/net/netdevsim/fib.c @@ -241,8 +241,8 @@ static int __net_init nsim_fib_netns_init(struct net *net) void nsim_fib_exit(void) { - unregister_pernet_subsys(&nsim_fib_net_ops); unregister_fib_notifier(&nsim_fib_nb); + unregister_pernet_subsys(&nsim_fib_net_ops); } int nsim_fib_init(void) @@ -257,6 +257,7 @@ int nsim_fib_init(void) err = register_fib_notifier(&nsim_fib_nb, nsim_fib_dump_inconsistent); if (err < 0) { + unregister_pernet_subsys(&nsim_fib_net_ops); pr_err("Failed to register fib notifier\n"); goto err_out; } -- 1.8.3.1

1 0

[PATCH v2] scsi: hisi_sas: directly trigger error handle of scsi instead of waiting for timeout
by Luo Jiaxing 05 Jun '20

05 Jun '20

We used timeout mechanism of scsi layer to trigger some IO's error handle, this type of abnormal IO require driver to enter error handle to clear the residue in the hardware. But timeout mechanism caught error handle time to be longer, some threads need to wait for tens of seconds when IO failed and enter error handle, so we try to trigger error handling directly. Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 4 +++- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +++- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index 031091e..49ea3b7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -1263,8 +1263,10 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba, !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) { slot_err_v1_hw(hisi_hba, task, slot); - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 6568e20..8ebddf5 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -2406,8 +2406,10 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) error_info[0], error_info[1], error_info[2], error_info[3]); - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 5b80856..7fd067c 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2408,8 +2408,10 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) dev_info(dev, "data underflow without sense, rsp_code:0x%x, rc:%d.\n", iu->resp_data[0], rc); } - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } -- 2.7.4

1 0

[PATCH v1 hulk-4.19-next] scsi: hisi_sas: directly trigger error handle of scsi instead of waiting for timeout
by Luo Jiaxing 05 Jun '20

05 Jun '20

driver inclusion category: bugfix bugzilla: NA DTS: NA ----------------------------------------------------------------------- We used timeout mechanism of scsi layer to trigger some IO's error handle, this type of abnormal IO require driver to enter error handle to clear the residue in the hardware. But timeout mechanism caught error handle time to be longer, some threads need to wait for tens of seconds when IO failed and enter error handle, so we try to trigger error handling directly. Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 4 +++- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 4 +++- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 4 +++- 3 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index 031091e..49ea3b7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -1263,8 +1263,10 @@ static int slot_complete_v1_hw(struct hisi_hba *hisi_hba, !(cmplt_hdr_data & CMPLT_HDR_RSPNS_XFRD_MSK)) { slot_err_v1_hw(hisi_hba, task, slot); - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 6568e20..8ebddf5 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -2406,8 +2406,10 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) error_info[0], error_info[1], error_info[2], error_info[3]); - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 5b80856..7fd067c 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2408,8 +2408,10 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) dev_info(dev, "data underflow without sense, rsp_code:0x%x, rc:%d.\n", iu->resp_data[0], rc); } - if (unlikely(slot->abort)) + if (unlikely(slot->abort)) { + sas_task_abort(task); return ts->stat; + } goto out; } -- 2.7.4

1 0

【Meeting Notice】Kernel & testing sync between Linaro and openEuler Time: 2020-06-10 16:00-17:30
by Meeting Book 03 Jun '20

03 Jun '20

1 0

【Meeting Notice】Kernel & testing sync between Linaro and openEuler Time: 2020-06-10 16:00-17:30
by Meeting Book 03 Jun '20

03 Jun '20

1 0

[PATCH 01/76] net: dsa: Do not make user port errors fatal
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Florian Fainelli <f.fainelli(a)gmail.com> commit 86f8b1c01a0a537a73d2996615133be63cdf75db upstream. Prior to 1d27732f411d ("net: dsa: setup and teardown ports"), we would not treat failures to set-up an user port as fatal, but after this commit we would, which is a regression for some systems where interfaces may be declared in the Device Tree, but the underlying hardware may not be present (pluggable daughter cards for instance). Fixes: 1d27732f411d ("net: dsa: setup and teardown ports") Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/dsa/dsa2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dsa/dsa2.c b/net/dsa/dsa2.c index 46ae4de..b036c55 100644 --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c @@ -412,7 +412,7 @@ static int dsa_tree_setup_switches(struct dsa_switch_tree *dst) err = dsa_switch_setup(ds); if (err) - return err; + continue; for (port = 0; port < ds->num_ports; port++) { dp = &ds->ports[port]; -- 1.8.3

1 75

[PATCH 1/9] net/hinic: Fix the firmware compatibility bug in the MAC reuse scenario
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Chiqijun <chiqijun(a)huawei.com> driver inclusion category: bugfix bugzilla: 4472 ----------------------------------------------------------------------- 2.3.0.1 and later drivers and firmware add MAC reuse feature, when the driver is compatible with firmware version 2.3.0.0 and before, if the ip link command is used to configure the MAC and VLAN for the VF, it will cause the VF network anomaly. To solve this problem, the driver obtains the function capability from the firmware when loading, and determines whether to support MAC reuse for different processing. Signed-off-by: Chiqijun <chiqijun(a)huawei.com> Reviewed-by: Zengweiliang <zengweiliang.zengweiliang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_hwdev.h | 1 + .../ethernet/huawei/hinic/hinic_mgmt_interface.h | 11 ++++ drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c | 45 +++++++++++++++-- drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h | 4 ++ drivers/net/ethernet/huawei/hinic/hinic_nic_io.c | 10 +++- drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h | 2 + drivers/net/ethernet/huawei/hinic/hinic_sriov.c | 59 ++++++++++++++-------- 7 files changed, 106 insertions(+), 26 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.h b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.h index a096f91..2a81867 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.h @@ -319,6 +319,7 @@ struct hinic_hwdev { struct hinic_board_info board_info; #define MGMT_VERSION_MAX_LEN 32 u8 mgmt_ver[MGMT_VERSION_MAX_LEN]; + u64 fw_support_func_flag; }; int hinic_init_comm_ch(struct hinic_hwdev *hwdev); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h b/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h index 3c3be6e..8673cf5 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h @@ -690,6 +690,15 @@ struct hinic_port_rt_cmd { u8 rsvd1[6]; }; +struct fw_support_func { + u8 status; + u8 version; + u8 rsvd0[6]; + + u64 flag; + u64 rsvd; +}; + struct hinic_vf_dcb_state { u8 status; u8 version; @@ -741,6 +750,8 @@ struct hinic_set_link_follow { int hinic_get_base_qpn(void *hwdev, u16 *global_qpn); +int hinic_get_fw_support_func(void *hwdev); + int hinic_vf_func_init(struct hinic_hwdev *hwdev); void hinic_vf_func_free(struct hinic_hwdev *hwdev); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c index f9e16ec..7dfedbd 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c @@ -201,6 +201,34 @@ int hinic_get_base_qpn(void *hwdev, u16 *global_qpn) return 0; } +int hinic_get_fw_support_func(void *hwdev) +{ + struct fw_support_func support_flag = {0}; + struct hinic_hwdev *dev = hwdev; + u16 out_size = sizeof(support_flag); + int err; + + if (!hwdev) + return -EINVAL; + + err = hinic_msg_to_mgmt_sync(hwdev, HINIC_MOD_L2NIC, + HINIC_PORT_CMD_GET_FW_SUPPORT_FLAG, + &support_flag, sizeof(support_flag), + &support_flag, &out_size, 0); + if (support_flag.status == HINIC_MGMT_CMD_UNSUPPORTED) { + nic_info(dev->dev_hdl, "Current firmware doesn't support to get function capability\n"); + support_flag.flag = 0; + } else if (support_flag.status || err || !out_size) { + nic_err(dev->dev_hdl, "Failed to get function capability, err: %d, status: 0x%x, out size: 0x%x\n", + err, support_flag.status, out_size); + return -EFAULT; + } + + dev->fw_support_func_flag = support_flag.flag; + + return 0; +} + #define HINIC_ADD_VLAN_IN_MAC 0x8000 #define HINIC_VLAN_ID_MASK 0x7FFF @@ -352,6 +380,11 @@ int hinic_update_mac_vlan(void *hwdev, u16 old_vlan, u16 new_vlan, int vf_id) if (!vf_info->pf_set_mac) return 0; + if (!FW_SUPPORT_MAC_REUSE_FUNC(dev)) { + nic_info(dev->dev_hdl, "Current firmware doesn't support mac reuse\n"); + return 0; + } + func_id = hinic_glb_pf_vf_offset(dev) + (u16)vf_id; vlan_id = old_vlan; if (vlan_id) @@ -2562,9 +2595,14 @@ static int hinic_init_vf_config(struct hinic_hwdev *hwdev, u16 vf_id) vf_info = hwdev->nic_io->vf_infos + HW_VF_ID_TO_OS(vf_id); if (vf_info->pf_set_mac) { func_id = hinic_glb_pf_vf_offset(hwdev) + vf_id; - vlan_id = vf_info->pf_vlan; - if (vlan_id) - vlan_id |= HINIC_ADD_VLAN_IN_MAC; + if (FW_SUPPORT_MAC_REUSE_FUNC(hwdev)) { + vlan_id = vf_info->pf_vlan; + if (vlan_id) + vlan_id |= HINIC_ADD_VLAN_IN_MAC; + } else { + vlan_id = 0; + } + err = hinic_set_mac(hwdev, vf_info->vf_mac_addr, vlan_id, func_id); if (err) { @@ -4065,3 +4103,4 @@ int hinic_get_sfp_type(void *hwdev, u8 *data0, u8 *data1) return 0; } + diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h index 427d469..e0979df 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h @@ -19,6 +19,10 @@ #define OS_VF_ID_TO_HW(os_vf_id) ((os_vf_id) + 1) #define HW_VF_ID_TO_OS(hw_vf_id) ((hw_vf_id) - 1) +#define FW_SUPPORT_MAC_REUSE 0x1 +#define FW_SUPPORT_MAC_REUSE_FUNC(hwdev) \ + ((hwdev)->fw_support_func_flag & FW_SUPPORT_MAC_REUSE) + #define HINIC_VLAN_PRIORITY_SHIFT 13 #define HINIC_RSS_INDIR_SIZE 256 diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c index 1cb4e26..f2fb0bc 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c @@ -831,9 +831,17 @@ int hinic_init_nic_hwdev(void *hwdev, u16 rx_buff_len) } /* VFs don't set port routine command report */ - if (hinic_func_type(dev) != TYPE_VF) + if (hinic_func_type(dev) != TYPE_VF) { + /* Get the fw support mac reuse flag */ + err = hinic_get_fw_support_func(hwdev); + if (err) { + nic_err(dev->dev_hdl, "Failed to get function capability\n"); + return err; + } + /* Inform mgmt to send sfp's information to driver */ err = hinic_set_port_routine_cmd_report(hwdev, true); + } return err; } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h b/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h index 46464b1f..d428f48 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h @@ -146,6 +146,8 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_PORT_LINK_STATUS = 0x76, HINIC_PORT_CMD_SET_CGE_PAUSE_TIME_CFG = 0x77, + HINIC_PORT_CMD_GET_FW_SUPPORT_FLAG = 0x79, + HINIC_PORT_CMD_SET_PORT_REPORT = 0x7B, HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xa0, diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c index 37d0116..73ab2d7 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_sriov.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_sriov.c @@ -266,6 +266,42 @@ int hinic_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) /*lint -save -e574 -e734*/ #ifdef IFLA_VF_MAX +static int set_hw_vf_vlan(struct hinic_sriov_info *sriov_info, + u16 cur_vlanprio, int vf, u16 vlan, u8 qos) +{ + int err = 0; + u16 old_vlan = cur_vlanprio & VLAN_VID_MASK; + + if (vlan || qos) { + if (cur_vlanprio) { + err = hinic_kill_vf_vlan(sriov_info->hwdev, + OS_VF_ID_TO_HW(vf)); + if (err) { + nic_err(&sriov_info->pdev->dev, "Failed to delete vf %d old vlan %d\n", + vf, old_vlan); + return err; + } + } + err = hinic_add_vf_vlan(sriov_info->hwdev, + OS_VF_ID_TO_HW(vf), vlan, qos); + if (err) { + nic_err(&sriov_info->pdev->dev, "Failed to add vf %d new vlan %d\n", + vf, vlan); + return err; + } + } else { + err = hinic_kill_vf_vlan(sriov_info->hwdev, OS_VF_ID_TO_HW(vf)); + if (err) { + nic_err(&sriov_info->pdev->dev, "Failed to delete vf %d vlan %d\n", + vf, old_vlan); + return err; + } + } + + return hinic_update_mac_vlan(sriov_info->hwdev, old_vlan, vlan, + OS_VF_ID_TO_HW(vf)); +} + #ifdef IFLA_VF_VLAN_INFO_MAX int hinic_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos, __be16 vlan_proto) @@ -276,7 +312,6 @@ int hinic_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos) struct hinic_nic_dev *adapter = netdev_priv(netdev); struct hinic_sriov_info *sriov_info; u16 vlanprio, cur_vlanprio; - int err = 0; if (!FUNC_SUPPORT_SET_VF_MAC_VLAN(adapter->hwdev)) { nicif_err(adapter, drv, netdev, @@ -298,27 +333,7 @@ int hinic_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos) if (vlanprio == cur_vlanprio) return 0; - if (vlan || qos) { - if (cur_vlanprio) - err = hinic_kill_vf_vlan(sriov_info->hwdev, - OS_VF_ID_TO_HW(vf)); - if (err) - goto out; - err = hinic_add_vf_vlan(sriov_info->hwdev, OS_VF_ID_TO_HW(vf), - vlan, qos); - } else { - err = hinic_kill_vf_vlan(sriov_info->hwdev, OS_VF_ID_TO_HW(vf)); - } - - if (err) - return err; - - err = hinic_update_mac_vlan(sriov_info->hwdev, - cur_vlanprio & VLAN_VID_MASK, vlan, - OS_VF_ID_TO_HW(vf)); - -out: - return err; + return set_hw_vf_vlan(sriov_info, cur_vlanprio, vf, vlan, qos); } #endif -- 1.8.3

1 8

[PATCH] irqchip/gic-v3-its: Probe ITS page size for all GITS_BASERn registers
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Marc Zyngier <maz(a)kernel.org> mainline inclusion from mainline-v5.6-rc4 commit d5df9dc96eb7423d3f742b13d5e1e479ff795eaa category: bugfix bugzilla: NA CVE: NA --------------------------- The GICv3 ITS driver assumes that once it has latched on a page size for a given BASER register, it can use the same page size as the maximum page size for all subsequent BASER registers. Although it worked so far, nothing in the architecture guarantees this, and Nianyao Tang hit this problem on some undisclosed implementation. Let's bite the bullet and probe the the supported page size on all BASER registers before starting to populate the tables. This simplifies the setup a bit, at the expense of a few additional MMIO accesses. Signed-off-by: Marc Zyngier <maz(a)kernel.org> Reported-by: Nianyao Tang <tangnianyao(a)huawei.com> Tested-by: Nianyao Tang <tangnianyao(a)huawei.com> Link: https://lore.kernel.org/r/1584089195-63897-1-git-send-email-zhangshaokun@hi… Signed-off-by: Hongbo Yao <yaohongbo(a)huawei.com> conflicts: drivers/irqchip/irq-gic-v3-its.c Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/irqchip/irq-gic-v3-its.c | 101 ++++++++++++++++++++++++++------------- 1 file changed, 67 insertions(+), 34 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 59c6c0d..bfedab2 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -17,6 +17,7 @@ #include <linux/acpi.h> #include <linux/acpi_iort.h> +#include <linux/bitfield.h> #include <linux/bitmap.h> #include <linux/cpu.h> #include <linux/crash_dump.h> @@ -1768,17 +1769,16 @@ static void its_write_baser(struct its_node *its, struct its_baser *baser, } static int its_setup_baser(struct its_node *its, struct its_baser *baser, - u64 cache, u64 shr, u32 psz, u32 order, - bool indirect) + u64 cache, u64 shr, u32 order, bool indirect) { u64 val = its_read_baser(its, baser); u64 esz = GITS_BASER_ENTRY_SIZE(val); u64 type = GITS_BASER_TYPE(val); u64 baser_phys, tmp; - u32 alloc_pages; + u32 alloc_pages, psz; void *base; -retry_alloc_baser: + psz = baser->psz; alloc_pages = (PAGE_ORDER_TO_SIZE(order) / psz); if (alloc_pages > GITS_BASER_PAGES_MAX) { pr_warn("ITS@%pa: %s too large, reduce ITS pages %u->%u\n", @@ -1851,25 +1851,6 @@ static int its_setup_baser(struct its_node *its, struct its_baser *baser, goto retry_baser; } - if ((val ^ tmp) & GITS_BASER_PAGE_SIZE_MASK) { - /* - * Page size didn't stick. Let's try a smaller - * size and retry. If we reach 4K, then - * something is horribly wrong... - */ - free_pages((unsigned long)base, order); - baser->base = NULL; - - switch (psz) { - case SZ_16K: - psz = SZ_4K; - goto retry_alloc_baser; - case SZ_64K: - psz = SZ_16K; - goto retry_alloc_baser; - } - } - if (val != tmp) { pr_err("ITS@%pa: %s doesn't stick: %llx %llx\n", &its->phys_base, its_base_type_string[type], @@ -1895,13 +1876,14 @@ static int its_setup_baser(struct its_node *its, struct its_baser *baser, static bool its_parse_indirect_baser(struct its_node *its, struct its_baser *baser, - u32 psz, u32 *order, u32 ids) + u32 *order, u32 ids) { u64 tmp = its_read_baser(its, baser); u64 type = GITS_BASER_TYPE(tmp); u64 esz = GITS_BASER_ENTRY_SIZE(tmp); u64 val = GITS_BASER_InnerShareable | GITS_BASER_RaWaWb; u32 new_order = *order; + u32 psz = baser->psz; bool indirect = false; /* No need to enable Indirection if memory requirement < (psz*2)bytes */ @@ -1960,11 +1942,58 @@ static void its_free_tables(struct its_node *its) } } +static int its_probe_baser_psz(struct its_node *its, struct its_baser *baser) +{ + u64 psz = SZ_64K; + + while (psz) { + u64 val, gpsz; + + val = its_read_baser(its, baser); + val &= ~GITS_BASER_PAGE_SIZE_MASK; + + switch (psz) { + case SZ_64K: + gpsz = GITS_BASER_PAGE_SIZE_64K; + break; + case SZ_16K: + gpsz = GITS_BASER_PAGE_SIZE_16K; + break; + case SZ_4K: + default: + gpsz = GITS_BASER_PAGE_SIZE_4K; + break; + } + + gpsz >>= GITS_BASER_PAGE_SIZE_SHIFT; + + val |= FIELD_PREP(GITS_BASER_PAGE_SIZE_MASK, gpsz); + its_write_baser(its, baser, val); + + if (FIELD_GET(GITS_BASER_PAGE_SIZE_MASK, baser->val) == gpsz) + break; + + switch (psz) { + case SZ_64K: + psz = SZ_16K; + break; + case SZ_16K: + psz = SZ_4K; + break; + case SZ_4K: + default: + return -1; + } + } + + baser->psz = psz; + return 0; +} + static int its_alloc_tables(struct its_node *its) { u64 shr = GITS_BASER_InnerShareable; u64 cache = GITS_BASER_RaWaWb; - u32 psz = SZ_64K; int err, i; if (its->flags & ITS_FLAGS_WORKAROUND_CAVIUM_22375) @@ -1975,34 +2004,38 @@ static int its_alloc_tables(struct its_node *its) struct its_baser *baser = its->tables + i; u64 val = its_read_baser(its, baser); u64 type = GITS_BASER_TYPE(val); - u32 order = get_order(psz); bool indirect = false; + u32 order; - switch (type) { - case GITS_BASER_TYPE_NONE: + if (type == GITS_BASER_TYPE_NONE) continue; + if (its_probe_baser_psz(its, baser)) { + its_free_tables(its); + return -ENXIO; + } + + order = get_order(baser->psz); + + switch (type) { case GITS_BASER_TYPE_DEVICE: - indirect = its_parse_indirect_baser(its, baser, - psz, &order, + indirect = its_parse_indirect_baser(its, baser, &order, its->device_ids); break; case GITS_BASER_TYPE_VCPU: - indirect = its_parse_indirect_baser(its, baser, - psz, &order, + indirect = its_parse_indirect_baser(its, baser, &order, ITS_MAX_VPEID_BITS); break; } - err = its_setup_baser(its, baser, cache, shr, psz, order, indirect); + err = its_setup_baser(its, baser, cache, shr, order, indirect); if (err < 0) { its_free_tables(its); return err; } /* Update settings which will be used for next BASERn */ - psz = baser->psz; cache = baser->val & GITS_BASER_CACHEABILITY_MASK; shr = baser->val & GITS_BASER_SHAREABILITY_MASK; } -- 1.8.3

1 0

[PATCH 1/4] vfio/mdev: Improve the create/remove sequence
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Parav Pandit <parav(a)mellanox.com> mainline inclusion from mainline-5.2 commit 522ecce08ab20b57342d65b05601818e0f95fb2c category: bugfix bugzilla: NA CVE: NA ------------------------------------------------- This patch addresses below two issues and prepares the code to address 3rd issue listed below. 1. mdev device is placed on the mdev bus before it is created in the vendor driver. Once a device is placed on the mdev bus without creating its supporting underlying vendor device, mdev driver's probe() gets triggered. However there isn't a stable mdev available to work on. create_store() mdev_create_device() device_register() ... vfio_mdev_probe() [...] parent->ops->create() vfio_ap_mdev_create() mdev_set_drvdata(mdev, matrix_mdev); /* Valid pointer set above */ Due to this way of initialization, mdev driver who wants to use the mdev, doesn't have a valid mdev to work on. 2. Current creation sequence is, parent->ops_create() groups_register() Remove sequence is, parent->ops->remove() groups_unregister() However, remove sequence should be exact mirror of creation sequence. Once this is achieved, all users of the mdev will be terminated first before removing underlying vendor device. (Follow standard linux driver model). At that point vendor's remove() ops shouldn't fail because taking the device off the bus should terminate any usage. 3. When remove operation fails, mdev sysfs removal attempts to add the file back on already removed device. Following call trace [1] is observed. [1] call trace: kernel: WARNING: CPU: 2 PID: 9348 at fs/sysfs/file.c:327 sysfs_create_file_ns+0x7f/0x90 kernel: CPU: 2 PID: 9348 Comm: bash Kdump: loaded Not tainted 5.1.0-rc6-vdevbus+ #6 kernel: Hardware name: Supermicro SYS-6028U-TR4+/X10DRU-i+, BIOS 2.0b 08/09/2016 kernel: RIP: 0010:sysfs_create_file_ns+0x7f/0x90 kernel: Call Trace: kernel: remove_store+0xdc/0x100 [mdev] kernel: kernfs_fop_write+0x113/0x1a0 kernel: vfs_write+0xad/0x1b0 kernel: ksys_write+0x5a/0xe0 kernel: do_syscall_64+0x5a/0x210 kernel: entry_SYSCALL_64_after_hwframe+0x49/0xbe Therefore, mdev core is improved in following ways. 1. Split the device registration/deregistration sequence so that some things can be done between initialization of the device and hooking it up to the bus respectively after deregistering it from the bus but before giving up our final reference. In particular, this means invoking the ->create() and ->remove() callbacks in those new windows. This gives the vendor driver an initialized mdev device to work with during creation. At the same time, a bus driver who wish to bind to mdev driver also gets initialized mdev device. This follows standard Linux kernel bus and device model. 2. During remove flow, first remove the device from the bus. This ensures that any bus specific devices are removed. Once device is taken off the mdev bus, invoke remove() of mdev from the vendor driver. 3. The driver core device model provides way to register and auto unregister the device sysfs attribute groups at dev->groups. Make use of dev->groups to let core create the groups and eliminate code to avoid explicit groups creation and removal. To ensure, that new sequence is solid, a below stack dump of a process is taken who attempts to remove the device while device is in use by vfio driver and user application. This stack dump validates that vfio driver guards against such device removal when device is in use. cat /proc/21962/stack [<0>] vfio_del_group_dev+0x216/0x3c0 [vfio] [<0>] mdev_remove+0x21/0x40 [mdev] [<0>] device_release_driver_internal+0xe8/0x1b0 [<0>] bus_remove_device+0xf9/0x170 [<0>] device_del+0x168/0x350 [<0>] mdev_device_remove_common+0x1d/0x50 [mdev] [<0>] mdev_device_remove+0x8c/0xd0 [mdev] [<0>] remove_store+0x71/0x90 [mdev] [<0>] kernfs_fop_write+0x113/0x1a0 [<0>] vfs_write+0xad/0x1b0 [<0>] ksys_write+0x5a/0xe0 [<0>] do_syscall_64+0x5a/0x210 [<0>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<0>] 0xffffffffffffffff This prepares the code to eliminate calling device_create_file() in subsequent patch. Reviewed-by: Cornelia Huck <cohuck(a)redhat.com> Signed-off-by: Parav Pandit <parav(a)mellanox.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Conflicts: drivers/vfio/mdev/mdev_core.c -mdev_device_remove_ops() and -mdev_device_remove_cb() are removed anyway, although they are not identical compared within the original patch. The type of uuid is still uuid_le, and it has not been changed to guid_t. drivers/vfio/mdev/mdev_private.h The type of uuid is still uuid_le, and it has not been changed to guid_t. Signed-off-by: Xiaoyang Xu <xuxiaoyang2(a)huawei.com> Reviewed-by: Yingtai Xie <xieyingtai(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/vfio/mdev/mdev_core.c | 94 +++++++++++----------------------------- drivers/vfio/mdev/mdev_private.h | 2 +- drivers/vfio/mdev/mdev_sysfs.c | 2 +- 3 files changed, 27 insertions(+), 71 deletions(-) diff --git a/drivers/vfio/mdev/mdev_core.c b/drivers/vfio/mdev/mdev_core.c index e052f62..9705a4a 100644 --- a/drivers/vfio/mdev/mdev_core.c +++ b/drivers/vfio/mdev/mdev_core.c @@ -103,55 +103,10 @@ static inline void mdev_put_parent(struct mdev_parent *parent) kref_put(&parent->ref, mdev_release_parent); } -static int mdev_device_create_ops(struct kobject *kobj, - struct mdev_device *mdev) -{ - struct mdev_parent *parent = mdev->parent; - int ret; - - ret = parent->ops->create(kobj, mdev); - if (ret) - return ret; - - ret = sysfs_create_groups(&mdev->dev.kobj, - parent->ops->mdev_attr_groups); - if (ret) - parent->ops->remove(mdev); - - return ret; -} - -/* - * mdev_device_remove_ops gets called from sysfs's 'remove' and when parent - * device is being unregistered from mdev device framework. - * - 'force_remove' is set to 'false' when called from sysfs's 'remove' which - * indicates that if the mdev device is active, used by VMM or userspace - * application, vendor driver could return error then don't remove the device. - * - 'force_remove' is set to 'true' when called from mdev_unregister_device() - * which indicate that parent device is being removed from mdev device - * framework so remove mdev device forcefully. - */ -static int mdev_device_remove_ops(struct mdev_device *mdev, bool force_remove) -{ - struct mdev_parent *parent = mdev->parent; - int ret; - - /* - * Vendor driver can return error if VMM or userspace application is - * using this mdev device. - */ - ret = parent->ops->remove(mdev); - if (ret && !force_remove) - return -EBUSY; - - sysfs_remove_groups(&mdev->dev.kobj, parent->ops->mdev_attr_groups); - return 0; -} - static int mdev_device_remove_cb(struct device *dev, void *data) { if (dev_is_mdev(dev)) - mdev_device_remove(dev, true); + mdev_device_remove(dev); return 0; } @@ -311,41 +266,43 @@ int mdev_device_create(struct kobject *kobj, struct device *dev, uuid_le uuid) mdev->parent = parent; kref_init(&mdev->ref); + device_initialize(&mdev->dev); mdev->dev.parent = dev; mdev->dev.bus = &mdev_bus_type; mdev->dev.release = mdev_device_release; dev_set_name(&mdev->dev, "%pUl", uuid.b); + mdev->dev.groups = parent->ops->mdev_attr_groups; + mdev->type_kobj = kobj; - ret = device_register(&mdev->dev); - if (ret) { - put_device(&mdev->dev); - goto mdev_fail; - } + ret = parent->ops->create(kobj, mdev); + if (ret) + goto ops_create_fail; - ret = mdev_device_create_ops(kobj, mdev); + ret = device_add(&mdev->dev); if (ret) - goto create_fail; + goto add_fail; ret = mdev_create_sysfs_files(&mdev->dev, type); - if (ret) { - mdev_device_remove_ops(mdev, true); - goto create_fail; - } + if (ret) + goto sysfs_fail; - mdev->type_kobj = kobj; mdev->active = true; dev_dbg(&mdev->dev, "MDEV: created\n"); return 0; -create_fail: - device_unregister(&mdev->dev); +sysfs_fail: + device_del(&mdev->dev); +add_fail: + parent->ops->remove(mdev); +ops_create_fail: + put_device(&mdev->dev); mdev_fail: mdev_put_parent(parent); return ret; } -int mdev_device_remove(struct device *dev, bool force_remove) +int mdev_device_remove(struct device *dev) { struct mdev_device *mdev, *tmp; struct mdev_parent *parent; @@ -374,16 +331,15 @@ int mdev_device_remove(struct device *dev, bool force_remove) mutex_unlock(&mdev_list_lock); type = to_mdev_type(mdev->type_kobj); + mdev_remove_sysfs_files(dev, type); + device_del(&mdev->dev); parent = mdev->parent; + ret = parent->ops->remove(mdev); + if (ret) + dev_err(&mdev->dev, "Remove failed: err=%d\n", ret); - ret = mdev_device_remove_ops(mdev, force_remove); - if (ret) { - mdev->active = true; - return ret; - } - - mdev_remove_sysfs_files(dev, type); - device_unregister(dev); + /* Balances with device_initialize() */ + put_device(&mdev->dev); mdev_put_parent(parent); return 0; diff --git a/drivers/vfio/mdev/mdev_private.h b/drivers/vfio/mdev/mdev_private.h index b5819b7..9c65d8e 100644 --- a/drivers/vfio/mdev/mdev_private.h +++ b/drivers/vfio/mdev/mdev_private.h @@ -59,6 +59,6 @@ struct mdev_type { void mdev_remove_sysfs_files(struct device *dev, struct mdev_type *type); int mdev_device_create(struct kobject *kobj, struct device *dev, uuid_le uuid); -int mdev_device_remove(struct device *dev, bool force_remove); +int mdev_device_remove(struct device *dev); #endif /* MDEV_PRIVATE_H */ diff --git a/drivers/vfio/mdev/mdev_sysfs.c b/drivers/vfio/mdev/mdev_sysfs.c index e7770b5..1286366 100644 --- a/drivers/vfio/mdev/mdev_sysfs.c +++ b/drivers/vfio/mdev/mdev_sysfs.c @@ -236,7 +236,7 @@ static ssize_t remove_store(struct device *dev, struct device_attribute *attr, if (val && device_remove_file_self(dev, attr)) { int ret; - ret = mdev_device_remove(dev, false); + ret = mdev_device_remove(dev); if (ret) { device_create_file(dev, attr); return ret; -- 1.8.3

1 3

[PATCH 1/2] arm64/mpam: Fix unreset resources when mkdir ctrl group or umount resctrl
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Wang ShaoBo <bobo.shaobowang(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34588 CVE: NA ----------------------------------------------- There are two problems related to schemata: 1) When rmdir a group and then mkdir a new group under resctrl root directory, the new group still inherits the schemata configuration from old. e.g. > mount -t resctrl resctrl /sys/fs/resctrl > cd /sys/fs/resctrl > mkdir p1 && cd p1 > echo 'L3:0=7f' > schemata > cd .. && rmdir p1 && mkdir p1 && cd p1 > cat schemata L3:0=7f;1=7fff;2=7fff;3=7fff MB:0=100;1=100;2=100;3=100 2) It still exists when umount /sys/fs/resctrl and remount. e.g. > mount -t resctrl resctrl /sys/fs/resctrl > cd /sys/fs/resctrl > echo 'L3:0=7f' > schemata > umount /sys/fs/resctrl > mount -t resctrl resctrl /sys/fs/resctrl > cat schemata L3:0=7f;1=7fff;2=7fff;3=7fff MB:0=100;1=100;2=100;3=100 Firstly we make each resctrl resource obtains their corresponding default configuration. NOTE we use zero to initialize L3 default value instead of max cpbm bits, as zero configurarion equals to maximum configuration for L3 MSCs. And we use max-percentage masks of max bandwidth to generate maximum configuration for MB. Then we reset resources' configuration settings to default value and back MSCs to default state, when mkdir or umount happended. Fixes: caf75b6b2540 ("resctrlfs: mpam: init struct for mpam") Fixes: 916dd9321e3c ("resctrlfs: init support resctrlfs") Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/include/asm/mpam_resource.h | 4 ++++ arch/arm64/include/asm/resctrl.h | 2 ++ arch/arm64/kernel/mpam.c | 17 +++++++++++++++++ arch/arm64/kernel/mpam_ctrlmon.c | 28 ++++++++++++++++++++++++++++ fs/resctrlfs.c | 5 +++++ 5 files changed, 56 insertions(+) diff --git a/arch/arm64/include/asm/mpam_resource.h b/arch/arm64/include/asm/mpam_resource.h index ab90596..1a6904c 100644 --- a/arch/arm64/include/asm/mpam_resource.h +++ b/arch/arm64/include/asm/mpam_resource.h @@ -89,6 +89,10 @@ /* [FIXME] hard code for hardlim */ #define MBW_MAX_SET(v) (MBW_MAX_HARDLIM|((v) << (16 - BWA_WD))) #define MBW_MAX_GET(v) (((v) & MBW_MAX_MASK) >> (16 - BWA_WD)) + +/* hard code for mbw_max max-percentage's cresponding masks */ +#define MBA_MAX_WD 63u + /* * emulate the mpam nodes * These should be reported by ACPI MPAM Table. diff --git a/arch/arm64/include/asm/resctrl.h b/arch/arm64/include/asm/resctrl.h index 0a0a12b..fb5fa6c 100644 --- a/arch/arm64/include/asm/resctrl.h +++ b/arch/arm64/include/asm/resctrl.h @@ -65,4 +65,6 @@ int mkdir_mondata_all(struct kernfs_node *parent_kn, mongroup_create_dir(struct kernfs_node *parent_kn, struct resctrl_group *prgrp, char *name, struct kernfs_node **dest_kn); +int rdtgroup_init_alloc(struct rdtgroup *rdtgrp); + #endif /* _ASM_ARM64_RESCTRL_H */ diff --git a/arch/arm64/kernel/mpam.c b/arch/arm64/kernel/mpam.c index 202e49a..120795e 100644 --- a/arch/arm64/kernel/mpam.c +++ b/arch/arm64/kernel/mpam.c @@ -86,6 +86,9 @@ static inline void mpam_node_assign_val(struct mpam_node *n, n->addr = hwpage_address; n->component_id = component_id; n->cpus_list = "0"; + + if (n->type == MPAM_RESOURCE_MC) + n->default_ctrl = MBA_MAX_WD; } #define MPAM_NODE_NAME_SIZE (10) @@ -544,6 +547,20 @@ void post_resctrl_mount(void) static int reset_all_ctrls(struct resctrl_resource *r) { + struct raw_resctrl_resource *rr; + struct rdt_domain *d; + int partid; + + rr = (struct raw_resctrl_resource *)r->res; + for (partid = 0; partid < rr->num_partid; partid++) { + list_for_each_entry(d, &r->domains, list) { + d->new_ctrl = rr->default_ctrl; + d->ctrl_val[partid] = rr->default_ctrl; + d->have_new_ctrl = true; + rr->msr_update(d, partid); + } + } + return 0; } diff --git a/arch/arm64/kernel/mpam_ctrlmon.c b/arch/arm64/kernel/mpam_ctrlmon.c index b9f9495..2b94efc 100644 --- a/arch/arm64/kernel/mpam_ctrlmon.c +++ b/arch/arm64/kernel/mpam_ctrlmon.c @@ -585,3 +585,31 @@ int resctrl_mkdir_ctrlmon_mondata(struct kernfs_node *parent_kn, } return ret; } + +/* Initialize the RDT group's allocations. */ +int rdtgroup_init_alloc(struct rdtgroup *rdtgrp) +{ + struct resctrl_resource *r; + struct raw_resctrl_resource *rr; + struct rdt_domain *d; + int ret; + + for_each_resctrl_resource(r) { + if (!r->alloc_enabled) + continue; + + rr = (struct raw_resctrl_resource *)r->res; + list_for_each_entry(d, &r->domains, list) { + d->new_ctrl = rr->default_ctrl; + d->have_new_ctrl = true; + } + + ret = update_domains(r, rdtgrp); + if (ret < 0) { + rdt_last_cmd_puts("Failed to initialize allocations\n"); + return ret; + } + } + + return 0; +} diff --git a/fs/resctrlfs.c b/fs/resctrlfs.c index 09e56384..8d463b8 100644 --- a/fs/resctrlfs.c +++ b/fs/resctrlfs.c @@ -670,6 +670,11 @@ static int resctrl_group_mkdir_ctrl_mon(struct kernfs_node *parent_kn, ret = 0; rdtgrp->closid = closid; + + ret = rdtgroup_init_alloc(rdtgrp); + if (ret < 0) + goto out_id_free; + list_add(&rdtgrp->resctrl_group_list, &resctrl_all_groups); if (resctrl_mon_capable) { -- 1.8.3

1 1

[PATCH] ext4: report error to userspace by netlink
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Zhao Minmin <zhaominmin1(a)huawei.com> hulk inclusion category: feature bugzilla: 34592 CVE: NA ------------------------------------------------- Implement the ext3/ext4 file system error report. This patch is used to implement abnormal alarm of ext3/ext4 filesystem. You can archieve this by setting "FILESYSTEM_MONITOR" or "FILESYSTEM_ALARM" on in configuration file. With this setting, alarm will be raised when ext3/ext4 file system expection occurs. Signed-off-by: Zhao Minmin <zhaominmin1(a)huawei.com> Reviewed-by: Yi Zhang <yi.zhang(a)huawei.com> Link: http://hulk.huawei.com/pipermail/kernel.openeuler/2016-March/009711.html Signed-off-by: Wang Hui <john.wanghui(a)huawei.com> Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> [yebin: cherry-pick this patch from redhat-7.5, commit 13848b1856c1] Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Reviewed-by: Yi Zhang <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/ext4.h | 9 ++++++++ fs/ext4/super.c | 51 ++++++++++++++++++++++++++++++++++++++++++++ include/uapi/linux/netlink.h | 1 + 3 files changed, 61 insertions(+) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index b1bcc6e..83bec07 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -54,6 +54,15 @@ #endif #endif +#define NL_EXT4_ERROR_GROUP 1 +#define EXT4_ERROR_MAGIC 0xAE32014U +struct ext4_err_msg { + int magic; + char s_id[32]; + unsigned long s_flags; + int ext4_errno; +}; + /* * The fourth extended filesystem constants/structures */ diff --git a/fs/ext4/super.c b/fs/ext4/super.c index bd6c1cf..33f1e7c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -54,6 +54,10 @@ #include "mballoc.h" #include "fsmap.h" +#include <uapi/linux/netlink.h> +#include <net/sock.h> +#include <net/net_namespace.h> + #define CREATE_TRACE_POINTS #include <trace/events/ext4.h> @@ -84,6 +88,8 @@ static struct dentry *ext4_mount(struct file_system_type *fs_type, int flags, static void ext4_clear_request_list(void); static struct inode *ext4_get_journal_inode(struct super_block *sb, unsigned int journal_inum); +static void ext4_netlink_send_info(struct super_block *sb, int ext4_errno); +static struct sock *ext4nl; /* * Lock ordering @@ -439,6 +445,42 @@ static bool system_going_down(void) || system_state == SYSTEM_RESTART; } +static void ext4_netlink_send_info(struct super_block *sb, int ext4_errno) +{ + int size; + sk_buff_data_t old_tail; + struct sk_buff *skb; + struct nlmsghdr *nlh; + struct ext4_err_msg *msg; + + if (ext4nl) { + size = NLMSG_SPACE(sizeof(struct ext4_err_msg)); + skb = alloc_skb(size, GFP_ATOMIC); + if (!skb) { + printk(KERN_ERR "Cannot alloc skb!"); + return; + } + old_tail = skb->tail; + nlh = nlmsg_put(skb, 0, 0, NLMSG_ERROR, size - sizeof(*nlh), 0); + if (!nlh) + goto nlmsg_failure; + msg = (struct ext4_err_msg *)NLMSG_DATA(nlh); + msg->magic = EXT4_ERROR_MAGIC; + memcpy(msg->s_id, sb->s_id, sizeof(sb->s_id)); + msg->s_flags = sb->s_flags; + msg->ext4_errno = ext4_errno; + nlh->nlmsg_len = skb->tail - old_tail; + NETLINK_CB(skb).portid = 0; + NETLINK_CB(skb).dst_group = NL_EXT4_ERROR_GROUP; + netlink_broadcast(ext4nl, skb, 0, NL_EXT4_ERROR_GROUP, + GFP_ATOMIC); + return; +nlmsg_failure: + if (skb) + kfree_skb(skb); + } +} + /* Deal with the reporting of failure conditions on a filesystem such as * inconsistencies detected or read IO failures. * @@ -469,6 +511,9 @@ static void ext4_handle_error(struct super_block *sb) if (journal) jbd2_journal_abort(journal, -EIO); } + + ext4_netlink_send_info(sb, 1); + /* * We force ERRORS_RO behavior when system is rebooting. Otherwise we * could panic during 'reboot -f' as the underlying device got already @@ -700,6 +745,7 @@ void __ext4_abort(struct super_block *sb, const char *function, if (EXT4_SB(sb)->s_journal) jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO); save_error_info(sb, function, line); + ext4_netlink_send_info(sb, 2); } if (test_opt(sb, ERRORS_PANIC) && !system_going_down()) { if (EXT4_SB(sb)->s_journal && @@ -6063,6 +6109,7 @@ static inline int ext3_feature_set_ok(struct super_block *sb) static int __init ext4_init_fs(void) { int i, err; + struct netlink_kernel_cfg cfg = {.groups = NL_EXT4_ERROR_GROUP,}; ratelimit_state_init(&ext4_mount_msg_ratelimit, 30 * HZ, 64); ext4_li_info = NULL; @@ -6102,6 +6149,9 @@ static int __init ext4_init_fs(void) if (err) goto out; + ext4nl = netlink_kernel_create(&init_net, NETLINK_FILESYSTEM, &cfg); + if (!ext4nl) + printk(KERN_ERR "EXT4-fs: Cannot create netlink socket.\n"); return 0; out: unregister_as_ext2(); @@ -6133,6 +6183,7 @@ static void __exit ext4_exit_fs(void) ext4_exit_system_zone(); ext4_exit_pageio(); ext4_exit_es(); + netlink_kernel_release(ext4nl); } MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); diff --git a/include/uapi/linux/netlink.h b/include/uapi/linux/netlink.h index 776bc92..ecaefee 100644 --- a/include/uapi/linux/netlink.h +++ b/include/uapi/linux/netlink.h @@ -29,6 +29,7 @@ #define NETLINK_RDMA 20 #define NETLINK_CRYPTO 21 /* Crypto layer */ #define NETLINK_SMC 22 /* SMC monitoring */ +#define NETLINK_FILESYSTEM 28 /* filesystem alarm*/ #define NETLINK_INET_DIAG NETLINK_SOCK_DIAG -- 1.8.3

1 0

[PATCH 1/3] Added ethtool_ops interface to query optical module information
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Chiqijun <chiqijun(a)huawei.com> driver inclusion category: feature bugzilla: 4472 ----------------------------------------------------------------------- Obtaining optical module information is time-consuming. If the user frequently acquires, it will affect the firmware to process other commands. To prevent such events, the firmware will actively report the optical module information to the driver when it is idle. Obtained from the driver cache information. When the user obtains through the command, directly obtain from the information saved by the driver. Signed-off-by: Chiqijun <chiqijun(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 77 ++++++++++ drivers/net/ethernet/huawei/hinic/hinic_hw.h | 54 +++++++ drivers/net/ethernet/huawei/hinic/hinic_hwdev.c | 168 +++++++++++++++++++++ drivers/net/ethernet/huawei/hinic/hinic_lld.c | 2 + .../ethernet/huawei/hinic/hinic_mgmt_interface.h | 12 ++ drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c | 139 ++++++++++++++++- drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h | 2 + drivers/net/ethernet/huawei/hinic/hinic_nic_io.c | 11 +- drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h | 3 + 9 files changed, 465 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c index f321365..78d32ea 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c @@ -2039,6 +2039,74 @@ static void hinic_diag_test(struct net_device *netdev, hinic_lp_test(netdev, eth_test, data, 0); } +#ifdef ETHTOOL_GMODULEEEPROM +static int hinic_get_module_info(struct net_device *netdev, + struct ethtool_modinfo *modinfo) +{ + struct hinic_nic_dev *nic_dev = netdev_priv(netdev); + u8 sfp_type; + u8 sfp_type_ext; + int err; + + err = hinic_get_sfp_type(nic_dev->hwdev, &sfp_type, &sfp_type_ext); + if (err) + return err; + + switch (sfp_type) { + case MODULE_TYPE_SFP: + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + break; + case MODULE_TYPE_QSFP: + modinfo->type = ETH_MODULE_SFF_8436; + modinfo->eeprom_len = STD_SFP_INFO_MAX_SIZE; + break; + case MODULE_TYPE_QSFP_PLUS: + if (sfp_type_ext >= 0x3) { + modinfo->type = ETH_MODULE_SFF_8636; + modinfo->eeprom_len = STD_SFP_INFO_MAX_SIZE; + + } else { + modinfo->type = ETH_MODULE_SFF_8436; + modinfo->eeprom_len = STD_SFP_INFO_MAX_SIZE; + } + break; + case MODULE_TYPE_QSFP28: + modinfo->type = ETH_MODULE_SFF_8636; + modinfo->eeprom_len = STD_SFP_INFO_MAX_SIZE; + break; + default: + nicif_warn(nic_dev, drv, netdev, + "Optical module unknown: 0x%x\n", sfp_type); + return -EINVAL; + } + + return 0; +} + +static int hinic_get_module_eeprom(struct net_device *netdev, + struct ethtool_eeprom *ee, u8 *data) +{ + struct hinic_nic_dev *nic_dev = netdev_priv(netdev); + u8 sfp_data[STD_SFP_INFO_MAX_SIZE]; + u16 len; + int err; + + if (!ee->len || ((ee->len + ee->offset) > STD_SFP_INFO_MAX_SIZE)) + return -EINVAL; + + memset(data, 0, ee->len); + + err = hinic_get_sfp_eeprom(nic_dev->hwdev, sfp_data, &len); + if (err) + return err; + + memcpy(data, sfp_data + ee->offset, ee->len); + + return 0; +} +#endif /* ETHTOOL_GMODULEEEPROM */ + static int set_l4_rss_hash_ops(struct ethtool_rxnfc *cmd, struct nic_rss_type *rss_type) { @@ -2532,6 +2600,10 @@ static int hinic_set_rxfh_indir(struct net_device *netdev, const u32 *indir) #ifndef HAVE_RHEL6_ETHTOOL_OPS_EXT_STRUCT .get_channels = hinic_get_channels, .set_channels = hinic_set_channels, +#ifdef ETHTOOL_GMODULEEEPROM + .get_module_info = hinic_get_module_info, + .get_module_eeprom = hinic_get_module_eeprom, +#endif #ifndef NOT_HAVE_GET_RXFH_INDIR_SIZE .get_rxfh_indir_size = hinic_get_rxfh_indir_size, #endif @@ -2552,6 +2624,11 @@ static int hinic_set_rxfh_indir(struct net_device *netdev, const u32 *indir) .set_phys_id = hinic_set_phys_id, .get_channels = hinic_get_channels, .set_channels = hinic_set_channels, +#ifdef ETHTOOL_GMODULEEEPROM + .get_module_info = hinic_get_module_info, + .get_module_eeprom = hinic_get_module_eeprom, +#endif + #ifndef NOT_HAVE_GET_RXFH_INDIR_SIZE .get_rxfh_indir_size = hinic_get_rxfh_indir_size, #endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw.h b/drivers/net/ethernet/huawei/hinic/hinic_hw.h index e489a00..d4becb6 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw.h @@ -264,6 +264,56 @@ struct hinic_init_para { #define INIT_SUCCESS 1 #define MAX_DRV_BUF_SIZE 4096 +struct hinic_cmd_get_light_module_abs { + u8 status; + u8 version; + u8 rsvd0[6]; + + u8 port_id; + u8 abs_status; /* 0:present, 1:absent */ + u8 rsv[2]; +}; + +#define MODULE_TYPE_SFP 0x3 +#define MODULE_TYPE_QSFP28 0x11 +#define MODULE_TYPE_QSFP 0x0C +#define MODULE_TYPE_QSFP_PLUS 0x0D + +#define SFP_INFO_MAX_SIZE 512 +struct hinic_cmd_get_sfp_qsfp_info { + u8 status; + u8 version; + u8 rsvd0[6]; + + u8 port_id; + u8 wire_type; + u16 out_len; + u8 sfp_qsfp_info[SFP_INFO_MAX_SIZE]; +}; + +#define STD_SFP_INFO_MAX_SIZE 640 +struct hinic_cmd_get_std_sfp_info { + u8 status; + u8 version; + u8 rsvd0[6]; + + u8 port_id; + u8 wire_type; + u16 eeprom_len; + u32 rsvd; + u8 sfp_info[STD_SFP_INFO_MAX_SIZE]; +}; + +#define HINIC_MAX_PORT_ID 4 + +struct hinic_port_routine_cmd { + int up_send_sfp_info; + int up_send_sfp_abs; + + struct hinic_cmd_get_sfp_qsfp_info sfp_info; + struct hinic_cmd_get_light_module_abs abs; +}; + struct card_node { struct list_head node; struct list_head func_list; @@ -282,6 +332,10 @@ struct card_node { bool disable_vf_load[HINIC_MAX_PF_NUM]; u32 vf_mbx_old_rand_id[MAX_FUNCTION_NUM]; u32 vf_mbx_rand_id[MAX_FUNCTION_NUM]; + struct hinic_port_routine_cmd rt_cmd[HINIC_MAX_PORT_ID]; + + /* mutex used for copy sfp info */ + struct mutex sfp_mutex; }; enum hinic_hwdev_init_state { diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c index 101b671..172be6c 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c @@ -59,6 +59,8 @@ #define HINIC_OK_FLAG_FAILED 1 +#define HINIC_GET_SFP_INFO_REAL_TIME 0x1 + #define HINIC_GLB_SO_RO_CFG_SHIFT 0x0 #define HINIC_GLB_SO_RO_CFG_MASK 0x1 #define HINIC_DISABLE_ORDER 0 @@ -913,6 +915,80 @@ int hinic_pf_msg_to_mgmt_sync(void *hwdev, enum hinic_mod_type mod, u8 cmd, return err; } +static bool is_sfp_info_cmd_cached(struct hinic_hwdev *hwdev, + enum hinic_mod_type mod, u8 cmd, + void *buf_in, u16 in_size, + void *buf_out, u16 *out_size) +{ + struct hinic_cmd_get_sfp_qsfp_info *sfp_info = NULL; + struct hinic_port_routine_cmd *rt_cmd = NULL; + struct card_node *chip_node = hwdev->chip_node; + + sfp_info = buf_in; + if (sfp_info->port_id >= HINIC_MAX_PORT_ID || + *out_size < sizeof(*sfp_info)) + return false; + + if (sfp_info->version == HINIC_GET_SFP_INFO_REAL_TIME) + return false; + + rt_cmd = &chip_node->rt_cmd[sfp_info->port_id]; + mutex_lock(&chip_node->sfp_mutex); + memcpy(buf_out, &rt_cmd->sfp_info, sizeof(*sfp_info)); + mutex_unlock(&chip_node->sfp_mutex); + + return true; +} + +static bool is_sfp_abs_cmd_cached(struct hinic_hwdev *hwdev, + enum hinic_mod_type mod, u8 cmd, + void *buf_in, u16 in_size, + void *buf_out, u16 *out_size) +{ + struct hinic_cmd_get_light_module_abs *abs = NULL; + struct hinic_port_routine_cmd *rt_cmd = NULL; + struct card_node *chip_node = hwdev->chip_node; + + abs = buf_in; + if (abs->port_id >= HINIC_MAX_PORT_ID || + *out_size < sizeof(*abs)) + return false; + + if (abs->version == HINIC_GET_SFP_INFO_REAL_TIME) + return false; + + rt_cmd = &chip_node->rt_cmd[abs->port_id]; + mutex_lock(&chip_node->sfp_mutex); + memcpy(buf_out, &rt_cmd->abs, sizeof(*abs)); + mutex_unlock(&chip_node->sfp_mutex); + + return true; +} + +static bool driver_processed_cmd(struct hinic_hwdev *hwdev, + enum hinic_mod_type mod, u8 cmd, + void *buf_in, u16 in_size, + void *buf_out, u16 *out_size) +{ + struct card_node *chip_node = hwdev->chip_node; + + if (mod == HINIC_MOD_L2NIC) { + if (cmd == HINIC_PORT_CMD_GET_SFP_INFO && + chip_node->rt_cmd->up_send_sfp_info) { + return is_sfp_info_cmd_cached(hwdev, mod, cmd, buf_in, + in_size, buf_out, + out_size); + } else if (cmd == HINIC_PORT_CMD_GET_SFP_ABS && + chip_node->rt_cmd->up_send_sfp_abs) { + return is_sfp_abs_cmd_cached(hwdev, mod, cmd, buf_in, + in_size, buf_out, + out_size); + } + } + + return false; +} + int hinic_msg_to_mgmt_sync(void *hwdev, enum hinic_mod_type mod, u8 cmd, void *buf_in, u16 in_size, void *buf_out, u16 *out_size, u32 timeout) @@ -949,6 +1025,10 @@ int hinic_msg_to_mgmt_sync(void *hwdev, enum hinic_mod_type mod, u8 cmd, err = __func_send_mbox(hwdev, mod, cmd, buf_in, in_size, buf_out, out_size, timeout); } else { + if (driver_processed_cmd(hwdev, mod, cmd, buf_in, in_size, + buf_out, out_size)) + return 0; + do { if (!hinic_get_mgmt_channel_status(hwdev) || !hinic_get_chip_present_flag(hwdev)) @@ -3202,6 +3282,8 @@ enum hinic_event_cmd { HINIC_EVENT_MGMT_PCIE_DFX, HINIC_EVENT_MCTP_HOST_INFO, HINIC_EVENT_MGMT_HEARTBEAT_EHD, + HINIC_EVENT_SFP_INFO_REPORT, + HINIC_EVENT_SFP_ABS_REPORT, HINIC_EVENT_MAX_TYPE, }; @@ -3284,6 +3366,16 @@ struct hinic_event_convert { .cmd = HINIC_MGMT_CMD_HEARTBEAT_EVENT, .event = HINIC_EVENT_MGMT_HEARTBEAT_EHD, }, + { + .mod = HINIC_MOD_L2NIC, + .cmd = HINIC_PORT_CMD_GET_SFP_INFO, + .event = HINIC_EVENT_SFP_INFO_REPORT, + }, + { + .mod = HINIC_MOD_L2NIC, + .cmd = HINIC_PORT_CMD_GET_SFP_ABS, + .event = HINIC_EVENT_SFP_ABS_REPORT, + }, }; static enum hinic_event_cmd __get_event_type(u8 mod, u8 cmd) @@ -3587,12 +3679,22 @@ static void module_status_event(struct hinic_hwdev *hwdev, struct hinic_cable_plug_event *plug_event; struct hinic_link_err_event *link_err; struct hinic_event_info event_info = {0}; + struct hinic_port_routine_cmd *rt_cmd; + struct card_node *chip_node = hwdev->chip_node; event_info.type = HINIC_EVENT_PORT_MODULE_EVENT; if (cmd == HINIC_EVENT_CABLE_PLUG) { plug_event = buf_in; + if (plug_event->port_id < HINIC_MAX_PORT_ID) { + rt_cmd = &chip_node->rt_cmd[plug_event->port_id]; + mutex_lock(&chip_node->sfp_mutex); + rt_cmd->up_send_sfp_abs = false; + rt_cmd->up_send_sfp_info = false; + mutex_unlock(&chip_node->sfp_mutex); + } + event_info.module_event.type = plug_event->plugged ? HINIC_PORT_MODULE_CABLE_PLUGGED : HINIC_PORT_MODULE_CABLE_UNPLUGGED; @@ -3733,6 +3835,64 @@ static void mgmt_watchdog_timeout_event_handler(struct hinic_hwdev *hwdev, queue_work(hwdev->workq, &hwdev->fault_work); } +static void port_sfp_info_event(struct hinic_hwdev *hwdev, void *buf_in, + u16 in_size, void *buf_out, u16 *out_size) +{ + struct hinic_cmd_get_sfp_qsfp_info *sfp_info = buf_in; + struct hinic_port_routine_cmd *rt_cmd; + struct card_node *chip_node = hwdev->chip_node; + + if (in_size != sizeof(*sfp_info)) { + sdk_err(hwdev->dev_hdl, "Invalid sfp info cmd, length: %d, should be %ld\n", + in_size, sizeof(*sfp_info)); + return; + } + + if (sfp_info->port_id >= HINIC_MAX_PORT_ID) { + sdk_err(hwdev->dev_hdl, "Invalid sfp port id: %d, max port is %d\n", + sfp_info->port_id, HINIC_MAX_PORT_ID - 1); + return; + } + + if (!chip_node->rt_cmd) + return; + + rt_cmd = &chip_node->rt_cmd[sfp_info->port_id]; + mutex_lock(&chip_node->sfp_mutex); + memcpy(&rt_cmd->sfp_info, sfp_info, sizeof(rt_cmd->sfp_info)); + rt_cmd->up_send_sfp_info = true; + mutex_unlock(&chip_node->sfp_mutex); +} + +static void port_sfp_abs_event(struct hinic_hwdev *hwdev, void *buf_in, + u16 in_size, void *buf_out, u16 *out_size) +{ + struct hinic_cmd_get_light_module_abs *sfp_abs = buf_in; + struct hinic_port_routine_cmd *rt_cmd; + struct card_node *chip_node = hwdev->chip_node; + + if (in_size != sizeof(*sfp_abs)) { + sdk_err(hwdev->dev_hdl, "Invalid sfp absent cmd, length: %d, should be %ld\n", + in_size, sizeof(*sfp_abs)); + return; + } + + if (sfp_abs->port_id >= HINIC_MAX_PORT_ID) { + sdk_err(hwdev->dev_hdl, "Invalid sfp port id: %d, max port is %d\n", + sfp_abs->port_id, HINIC_MAX_PORT_ID - 1); + return; + } + + if (!chip_node->rt_cmd) + return; + + rt_cmd = &chip_node->rt_cmd[sfp_abs->port_id]; + mutex_lock(&chip_node->sfp_mutex); + memcpy(&rt_cmd->abs, sfp_abs, sizeof(rt_cmd->abs)); + rt_cmd->up_send_sfp_abs = true; + mutex_unlock(&chip_node->sfp_mutex); +} + static void mgmt_reset_event_handler(struct hinic_hwdev *hwdev) { sdk_info(hwdev->dev_hdl, "Mgmt is reset\n"); @@ -4241,6 +4401,14 @@ static void _event_handler(struct hinic_hwdev *hwdev, enum hinic_event_cmd cmd, buf_out, out_size); break; + case HINIC_EVENT_SFP_INFO_REPORT: + port_sfp_info_event(hwdev, buf_in, in_size, buf_out, out_size); + break; + + case HINIC_EVENT_SFP_ABS_REPORT: + port_sfp_abs_event(hwdev, buf_in, in_size, buf_out, out_size); + break; + default: sdk_warn(hwdev->dev_hdl, "Unsupported event %d to process\n", cmd); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_lld.c b/drivers/net/ethernet/huawei/hinic/hinic_lld.c index e8e446a..3bf47ac 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_lld.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_lld.c @@ -1990,6 +1990,8 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) INIT_LIST_HEAD(&chip_node->func_list); pci_adapter->chip_node = chip_node; + mutex_init(&chip_node->sfp_mutex); + return 0; alloc_dbgtool_attr_file_err: diff --git a/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h b/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h index 13bc351..3c3be6e 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_mgmt_interface.h @@ -680,6 +680,16 @@ struct hinic_capture_info { u32 data_vlan; }; +struct hinic_port_rt_cmd { + u8 status; + u8 version; + u8 rsvd0[6]; + + u8 pf_id; + u8 enable; + u8 rsvd1[6]; +}; + struct hinic_vf_dcb_state { u8 status; u8 version; @@ -737,6 +747,8 @@ struct hinic_set_link_follow { void hinic_unregister_vf_msg_handler(void *hwdev, u16 vf_id); +int hinic_set_port_routine_cmd_report(void *hwdev, bool enable); + int hinic_refresh_nic_cfg(void *hwdev, struct nic_port_info *port_info); int hinic_save_dcb_state(struct hinic_hwdev *hwdev, diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c index 07858be..6ddae36 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c @@ -35,7 +35,6 @@ #include "hinic_nic.h" #include "hinic_mgmt_interface.h" #include "hinic_hwif.h" -#include "hinic_eqs.h" static unsigned char set_vf_link_state; module_param(set_vf_link_state, byte, 0444); @@ -3571,6 +3570,35 @@ int hinic_set_super_cqe_state(void *hwdev, bool enable) return 0; } +int hinic_set_port_routine_cmd_report(void *hwdev, bool enable) +{ + struct hinic_port_rt_cmd rt_cmd = { 0 }; + struct hinic_hwdev *dev = hwdev; + u16 out_size = sizeof(rt_cmd); + int err; + + if (!hwdev) + return -EINVAL; + + rt_cmd.pf_id = (u8)hinic_global_func_id(hwdev); + rt_cmd.enable = enable; + + err = l2nic_msg_to_mgmt_sync(hwdev, + HINIC_PORT_CMD_SET_PORT_REPORT, + &rt_cmd, sizeof(rt_cmd), &rt_cmd, + &out_size); + if (rt_cmd.status == HINIC_MGMT_CMD_UNSUPPORTED) { + nic_info(dev->dev_hdl, "Current firmware doesn't support to set port routine command report\n"); + } else if (rt_cmd.status || err || !out_size) { + nic_err(dev->dev_hdl, + "Failed to set port routine command report, err: %d, status: 0x%x, out size: 0x%x\n", + err, rt_cmd.status, out_size); + return -EFAULT; + } + + return 0; +} + int hinic_set_func_capture_en(void *hwdev, u16 func_id, bool cap_en) { struct hinic_hwdev *dev = hwdev; @@ -3889,3 +3917,112 @@ int hinic_disable_tx_promisc(void *hwdev) } return 0; } + +static bool hinic_if_sfp_absent(void *hwdev) +{ + struct card_node *chip_node = ((struct hinic_hwdev *)hwdev)->chip_node; + struct hinic_port_routine_cmd *rt_cmd; + struct hinic_cmd_get_light_module_abs sfp_abs = {0}; + u8 port_id = hinic_physical_port_id(hwdev); + u16 out_size = sizeof(sfp_abs); + int err; + bool sfp_abs_valid; + bool sfp_abs_status; + + rt_cmd = &chip_node->rt_cmd[port_id]; + mutex_lock(&chip_node->sfp_mutex); + sfp_abs_valid = rt_cmd->up_send_sfp_abs; + sfp_abs_status = (bool)rt_cmd->abs.abs_status; + if (sfp_abs_valid) { + mutex_unlock(&chip_node->sfp_mutex); + return sfp_abs_status; + } + mutex_unlock(&chip_node->sfp_mutex); + + sfp_abs.port_id = port_id; + err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_GET_SFP_ABS, + &sfp_abs, sizeof(sfp_abs), &sfp_abs, + &out_size); + if (sfp_abs.status || err || !out_size) { + nic_err(((struct hinic_hwdev *)hwdev)->dev_hdl, + "Failed to get port%d sfp absent status, err: %d, status: 0x%x, out size: 0x%x\n", + port_id, err, sfp_abs.status, out_size); + return true; + } + + return ((sfp_abs.abs_status == 0) ? false : true); +} + +int hinic_get_sfp_eeprom(void *hwdev, u8 *data, u16 *len) +{ + struct hinic_cmd_get_std_sfp_info sfp_info = {0}; + u8 port_id; + u16 out_size = sizeof(sfp_info); + int err; + + if (!hwdev || !data || !len) + return -EINVAL; + + port_id = hinic_physical_port_id(hwdev); + if (port_id >= HINIC_MAX_PORT_ID) + return -EINVAL; + + if (hinic_if_sfp_absent(hwdev)) + return -ENXIO; + + sfp_info.port_id = port_id; + err = l2nic_msg_to_mgmt_sync(hwdev, HINIC_PORT_CMD_GET_STD_SFP_INFO, + &sfp_info, sizeof(sfp_info), &sfp_info, + &out_size); + if (sfp_info.status || err || !out_size) { + nic_err(((struct hinic_hwdev *)hwdev)->dev_hdl, + "Failed to get port%d sfp eeprom information, err: %d, status: 0x%x, out size: 0x%x\n", + port_id, err, sfp_info.status, out_size); + return -EIO; + } + + *len = min_t(u16, sfp_info.eeprom_len, STD_SFP_INFO_MAX_SIZE); + memcpy(data, sfp_info.sfp_info, STD_SFP_INFO_MAX_SIZE); + + return 0; +} + +int hinic_get_sfp_type(void *hwdev, u8 *data0, u8 *data1) +{ + struct card_node *chip_node = NULL; + struct hinic_port_routine_cmd *rt_cmd; + u8 sfp_data[STD_SFP_INFO_MAX_SIZE]; + u16 len; + u8 port_id; + int err; + + if (!hwdev || !data0 || !data1) + return -EINVAL; + + port_id = hinic_physical_port_id(hwdev); + if (port_id >= HINIC_MAX_PORT_ID) + return -EINVAL; + + if (hinic_if_sfp_absent(hwdev)) + return -ENXIO; + + chip_node = ((struct hinic_hwdev *)hwdev)->chip_node; + rt_cmd = &chip_node->rt_cmd[port_id]; + mutex_lock(&chip_node->sfp_mutex); + if (rt_cmd->up_send_sfp_info) { + *data0 = rt_cmd->sfp_info.sfp_qsfp_info[0]; + *data1 = rt_cmd->sfp_info.sfp_qsfp_info[1]; + mutex_unlock(&chip_node->sfp_mutex); + return 0; + } + mutex_unlock(&chip_node->sfp_mutex); + + err = hinic_get_sfp_eeprom(hwdev, sfp_data, &len); + if (err) + return err; + + *data0 = sfp_data[0]; + *data1 = sfp_data[1]; + + return 0; +} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h index 395f6d8..eb060fb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.h @@ -620,5 +620,7 @@ int hinic_add_hw_rqfilter(void *hwdev, struct hinic_rq_filter_info *filter_info); int hinic_del_hw_rqfilter(void *hwdev, struct hinic_rq_filter_info *filter_info); +int hinic_get_sfp_eeprom(void *hwdev, u8 *data, u16 *len); +int hinic_get_sfp_type(void *hwdev, u8 *data0, u8 *data1); #endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c index 8d13105..1cb4e26 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_io.c @@ -829,13 +829,20 @@ int hinic_init_nic_hwdev(void *hwdev, u16 rx_buff_len) } } } - return 0; + + /* VFs don't set port routine command report */ + if (hinic_func_type(dev) != TYPE_VF) + /* Inform mgmt to send sfp's information to driver */ + err = hinic_set_port_routine_cmd_report(hwdev, true); + + return err; } EXPORT_SYMBOL(hinic_init_nic_hwdev); void hinic_free_nic_hwdev(void *hwdev) { - /* nothing to do for now */ + if (hinic_func_type(hwdev) != TYPE_VF) + hinic_set_port_routine_cmd_report(hwdev, false); } EXPORT_SYMBOL(hinic_free_nic_hwdev); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h b/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h index 8730565..46464b1f 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_port_cmd.h @@ -146,6 +146,8 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_PORT_LINK_STATUS = 0x76, HINIC_PORT_CMD_SET_CGE_PAUSE_TIME_CFG = 0x77, + HINIC_PORT_CMD_SET_PORT_REPORT = 0x7B, + HINIC_PORT_CMD_LINK_STATUS_REPORT = 0xa0, HINIC_PORT_CMD_SET_LOSSLESS_ETH = 0xa3, @@ -200,6 +202,7 @@ enum hinic_port_cmd { HINIC_PORT_CMD_SET_LINK_FOLLOW = 0xF8, HINIC_PORT_CMD_SET_VF_MAX_MIN_RATE = 0xF9, HINIC_PORT_CMD_SET_RXQ_LRO_ADPT = 0xFA, + HINIC_PORT_CMD_GET_SFP_ABS = 0xFB, HINIC_PORT_CMD_Q_FILTER = 0xFC, HINIC_PORT_CMD_TCAM_FILTER = 0xFE, HINIC_PORT_CMD_SET_VLAN_FILTER = 0xFF, -- 1.8.3

1 2

[PATCH] Revert "consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c"
by Yang Yingliang 01 Jun '20

01 Jun '20

From: Ben Hutchings <ben(a)decadent.org.uk> mainline inclusion from mainline-v5.3-rc1 commit 15b3cd8ef46ad1b100e0d3c7e38774f330726820 category: bugfix bugzilla: 34617 CVE: CVE-2019-12379 --------------------------- This reverts commit 84ecc2f6eb1cb12e6d44818f94fa49b50f06e6ac. con_insert_unipair() is working with a sparse 3-dimensional array: - p->uni_pgdir[] is the top layer - p1 points to a middle layer - p2 points to a bottom layer If it needs to allocate a new middle layer, and then fails to allocate a new bottom layer, it would previously free only p2, and now it frees both p1 and p2. But since the new middle layer was already registered in the top layer, it was not leaked. However, if it looks up an *existing* middle layer and then fails to allocate a bottom layer, it now frees both p1 and p2 but does *not* free any other bottom layers under p1. So it *introduces* a memory leak. The error path also cleared the wrong index in p->uni_pgdir[], introducing a use-after-free. Signed-off-by: Ben Hutchings <ben(a)decadent.org.uk> Fixes: 84ecc2f6eb1c ("consolemap: Fix a memory leaking bug in drivers/tty/vt/consolemap.c") Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/tty/vt/consolemap.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 814d1b7..7c7ada0 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -489,11 +489,7 @@ static int con_unify_unimap(struct vc_data *conp, struct uni_pagedir *p) p2 = p1[n = (unicode >> 6) & 0x1f]; if (!p2) { p2 = p1[n] = kmalloc_array(64, sizeof(u16), GFP_KERNEL); - if (!p2) { - kfree(p1); - p->uni_pgdir[n] = NULL; - return -ENOMEM; - } + if (!p2) return -ENOMEM; memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */ } -- 1.8.3

1 0

[PATCH 1/3] sunrpc: check that domain table is empty at module unload.
by Yang Yingliang 26 May '20

26 May '20

From: NeilBrown <neilb(a)suse.de> hulk inclusion category: bugfix bugzilla: NA CVE: CVE-2020-12656 --------------------------- The domain table should be empty at module unload. If it isn't there is a bug somewhere. So check and report. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206651 Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/sunrpc/sunrpc.h | 1 + net/sunrpc/sunrpc_syms.c | 2 ++ net/sunrpc/svcauth.c | 27 +++++++++++++++++++++++++++ 3 files changed, 30 insertions(+) diff --git a/net/sunrpc/sunrpc.h b/net/sunrpc/sunrpc.h index c9bacb3..82035fa 100644 --- a/net/sunrpc/sunrpc.h +++ b/net/sunrpc/sunrpc.h @@ -56,4 +56,5 @@ int svc_send_common(struct socket *sock, struct xdr_buf *xdr, int rpc_clients_notifier_register(void); void rpc_clients_notifier_unregister(void); +void auth_domain_cleanup(void); #endif /* _NET_SUNRPC_SUNRPC_H */ diff --git a/net/sunrpc/sunrpc_syms.c b/net/sunrpc/sunrpc_syms.c index 56f9eff..7b4c6ee 100644 --- a/net/sunrpc/sunrpc_syms.c +++ b/net/sunrpc/sunrpc_syms.c @@ -22,6 +22,7 @@ #include <linux/sunrpc/rpc_pipe_fs.h> #include <linux/sunrpc/xprtsock.h> +#include "sunrpc.h" #include "netns.h" unsigned int sunrpc_net_id; @@ -130,6 +131,7 @@ static __net_exit void sunrpc_exit_net(struct net *net) unregister_rpc_pipefs(); rpc_destroy_mempool(); unregister_pernet_subsys(&sunrpc_net_ops); + auth_domain_cleanup(); #if IS_ENABLED(CONFIG_SUNRPC_DEBUG) rpc_unregister_sysctl(); #endif diff --git a/net/sunrpc/svcauth.c b/net/sunrpc/svcauth.c index bb8db3c..0107350 100644 --- a/net/sunrpc/svcauth.c +++ b/net/sunrpc/svcauth.c @@ -18,6 +18,10 @@ #include <linux/err.h> #include <linux/hash.h> +#include <trace/events/sunrpc.h> + +#include "sunrpc.h" + #define RPCDBG_FACILITY RPCDBG_AUTH @@ -170,3 +174,26 @@ struct auth_domain *auth_domain_find(char *name) return auth_domain_lookup(name, NULL); } EXPORT_SYMBOL_GPL(auth_domain_find); + +/** + * auth_domain_cleanup - check that the auth_domain table is empty + * + * On module unload the auth_domain_table must be empty. To make it + * easier to catch bugs which don't clean up domains properly, we + * warn if anything remains in the table at cleanup time. + * + * Note that we cannot proactively remove the domains at this stage. + * The ->release() function might be in a module that has already been + * unloaded. + */ + +void auth_domain_cleanup(void) +{ + int h; + struct auth_domain *hp; + + for (h = 0; h < DN_HASHMAX; h++) + hlist_for_each_entry(hp, &auth_domain_table[h], hash) + pr_warn("svc: domain %s still present at module unload.\n", + hp->name); +} -- 1.8.3

1 2

[PATCH 1/7] USB: gadget: fix illegal array access in binding with UDC
by Yang Yingliang 26 May '20

26 May '20

From: Kyungtae Kim <kt0755(a)gmail.com> mainline inclusion from mainline-v5.7-rc6 commit 15753588bcd4bbffae1cca33c8ced5722477fe1f category: bugfix bugzilla: 13690 CVE: CVE-2020-13143 ------------------------------------------------- FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Kyungtae Kim <kt0755(a)gmail.com> Reported-and-tested-by: Kyungtae Kim <kt0755(a)gmail.com> Cc: Felipe Balbi <balbi(a)kernel.org> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01 Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/usb/gadget/configfs.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c index ab9ac48..a7709d1 100644 --- a/drivers/usb/gadget/configfs.c +++ b/drivers/usb/gadget/configfs.c @@ -260,6 +260,9 @@ static ssize_t gadget_dev_desc_UDC_store(struct config_item *item, char *name; int ret; + if (strlen(page) < len) + return -EOVERFLOW; + name = kstrdup(page, GFP_KERNEL); if (!name) return -ENOMEM; -- 1.8.3

1 6

[PATCH] signal: fix kabi changes in struct task_struct
by Yang Yingliang 20 May '20

20 May '20

hulk inclusion category: kabi bugzilla: NA CVE: CVE-2020-10741, CVE-2020-12826 --------------------------- Commit d1e7fd6462ca ("signal: Extend exec_id to 64bits") can fixes CVE-2020-10741 and CVE-2020-12826, but it introduces a kabi change in struct task_strcut. Fix this kabi broken by using another new 64bits variables parent_exec_id_u64 and self_exec_id_u64. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/exec.c | 1 + include/linux/sched.h | 9 +++++++-- kernel/fork.c | 2 ++ kernel/signal.c | 2 +- 4 files changed, 11 insertions(+), 3 deletions(-) diff --git a/fs/exec.c b/fs/exec.c index 15d9974..19c0700 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1380,6 +1380,7 @@ void setup_new_exec(struct linux_binprm * bprm) /* An exec changes our domain. We are no longer part of the thread group */ WRITE_ONCE(current->self_exec_id, current->self_exec_id + 1); + WRITE_ONCE(current->self_exec_id_u64, current->self_exec_id_u64 + 1); flush_signal_handlers(current, 0); } EXPORT_SYMBOL(setup_new_exec); diff --git a/include/linux/sched.h b/include/linux/sched.h index 1d15ab4..302fa00 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -892,8 +892,8 @@ struct task_struct { struct seccomp seccomp; /* Thread group tracking: */ - u64 parent_exec_id; - u64 self_exec_id; + u32 parent_exec_id; + u32 self_exec_id; /* Protection against (de-)allocation: mm, files, fs, tty, keyrings, mems_allowed, mempolicy: */ spinlock_t alloc_lock; @@ -1212,8 +1212,13 @@ struct task_struct { */ randomized_struct_fields_end +#ifndef __GENKSYMS__ + u64 parent_exec_id_u64; + u64 self_exec_id_u64; +#else KABI_RESERVE(1) KABI_RESERVE(2) +#endif KABI_RESERVE(3) KABI_RESERVE(4) KABI_RESERVE(5) diff --git a/kernel/fork.c b/kernel/fork.c index 2839961..951aa6f 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -2055,9 +2055,11 @@ static __latent_entropy struct task_struct *copy_process( if (clone_flags & (CLONE_PARENT|CLONE_THREAD)) { p->real_parent = current->real_parent; p->parent_exec_id = current->parent_exec_id; + p->parent_exec_id_u64 = current->parent_exec_id_u64; } else { p->real_parent = current; p->parent_exec_id = current->self_exec_id; + p->parent_exec_id_u64 = current->self_exec_id_u64; } klp_copy_process(p); diff --git a/kernel/signal.c b/kernel/signal.c index 60ea2ee..a58af7d 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1827,7 +1827,7 @@ bool do_notify_parent(struct task_struct *tsk, int sig) * This is only possible if parent == real_parent. * Check if it has changed security domain. */ - if (tsk->parent_exec_id != READ_ONCE(tsk->parent->self_exec_id)) + if (tsk->parent_exec_id_u64 != READ_ONCE(tsk->parent->self_exec_id_u64)) sig = SIGCHLD; } -- 1.8.3

1 0

[PATCH 01/14] net: hns3: solve the unlock 2 times when rocee init fault
by Yang Yingliang 20 May '20

20 May '20

From: Hao Shen <shenhao21(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA -------------------------------------------------------- When rocee init fault, the rtnl_unlock execute 2 times Signed-off-by: Hao Shen <shenhao21(a)huawei.com> Reviewed-by: Zhong Zhaohui <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 0b7e159..3e0afc4 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3865,7 +3865,7 @@ static int hclge_resume(struct hnae3_ae_dev *ae_dev) ret = hclge_notify_roce_client(hdev, HNAE3_INIT_CLIENT); if (ret) - goto err_reset_lock; + return ret; rtnl_lock(); -- 1.8.3

1 13

[PATCH 1/2] KVM: SVM: Fix potential memory leak in svm_cpu_init()
by Yang Yingliang 13 May '20

13 May '20

From: Miaohe Lin <linmiaohe(a)huawei.com> mainline inclusion from mainline-v5.6-rc4 commit d80b64ff297e40c2b6f7d7abc1b3eba70d22a068 category: bugfix bugzilla: 13690 CVE: CVE-2020-12768 ------------------------------------------------- When kmalloc memory for sd->sev_vmcbs failed, we forget to free the page held by sd->save_area. Also get rid of the var r as '-ENOMEM' is actually the only possible outcome here. Reviewed-by: Liran Alon <liran.alon(a)oracle.com> Reviewed-by: Vitaly Kuznetsov <vkuznets(a)redhat.com> Signed-off-by: Miaohe Lin <linmiaohe(a)huawei.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/kvm/svm.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index df22744..226db3dc 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -998,33 +998,32 @@ static void svm_cpu_uninit(int cpu) static int svm_cpu_init(int cpu) { struct svm_cpu_data *sd; - int r; sd = kzalloc(sizeof(struct svm_cpu_data), GFP_KERNEL); if (!sd) return -ENOMEM; sd->cpu = cpu; - r = -ENOMEM; sd->save_area = alloc_page(GFP_KERNEL); if (!sd->save_area) - goto err_1; + goto free_cpu_data; if (svm_sev_enabled()) { - r = -ENOMEM; sd->sev_vmcbs = kmalloc_array(max_sev_asid + 1, sizeof(void *), GFP_KERNEL); if (!sd->sev_vmcbs) - goto err_1; + goto free_save_area; } per_cpu(svm_data, cpu) = sd; return 0; -err_1: +free_save_area: + __free_page(sd->save_area); +free_cpu_data: kfree(sd); - return r; + return -ENOMEM; } -- 1.8.3

1 1

[PATCH] config: disable CONFIG_ARM64_ERRATUM_1542419 by default
by Yang Yingliang 13 May '20

13 May '20

hulk inclusion category: config bugzilla: NA CVE: NA ------------------------------------------------- Introduced by 05460849c3b5 ("arm64: errata: Hide CTR_EL0.DIC on systems affected by Neoverse-N1 #1542419"). Disable CONFIG_ARM64_ERRATUM_1542419 by default. Reviewed-by: Xuefeng Wang <wxf.wang(a)hisilicon.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/euleros_defconfig | 1 + arch/arm64/configs/hulk_defconfig | 1 + arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/configs/storage_ci_defconfig | 1 + arch/arm64/configs/syzkaller_defconfig | 1 + 5 files changed, 5 insertions(+) diff --git a/arch/arm64/configs/euleros_defconfig b/arch/arm64/configs/euleros_defconfig index 04456f3..360e692 100644 --- a/arch/arm64/configs/euleros_defconfig +++ b/arch/arm64/configs/euleros_defconfig @@ -387,6 +387,7 @@ CONFIG_ARM64_ERRATUM_845719=y CONFIG_ARM64_ERRATUM_843419=y CONFIG_ARM64_ERRATUM_1024718=y # CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set CONFIG_CAVIUM_ERRATUM_22375=y CONFIG_CAVIUM_ERRATUM_23144=y CONFIG_CAVIUM_ERRATUM_23154=y diff --git a/arch/arm64/configs/hulk_defconfig b/arch/arm64/configs/hulk_defconfig index 6ee2472..bb020a1 100644 --- a/arch/arm64/configs/hulk_defconfig +++ b/arch/arm64/configs/hulk_defconfig @@ -386,6 +386,7 @@ CONFIG_ARM64_ERRATUM_845719=y # CONFIG_ARM64_ERRATUM_843419 is not set # CONFIG_ARM64_ERRATUM_1024718 is not set # CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set # CONFIG_CAVIUM_ERRATUM_22375 is not set # CONFIG_CAVIUM_ERRATUM_23144 is not set # CONFIG_CAVIUM_ERRATUM_23154 is not set diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9e6f560..b943729 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -389,6 +389,7 @@ CONFIG_ARM64_ERRATUM_845719=y CONFIG_ARM64_ERRATUM_843419=y CONFIG_ARM64_ERRATUM_1024718=y # CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set CONFIG_CAVIUM_ERRATUM_22375=y CONFIG_CAVIUM_ERRATUM_23144=y CONFIG_CAVIUM_ERRATUM_23154=y diff --git a/arch/arm64/configs/storage_ci_defconfig b/arch/arm64/configs/storage_ci_defconfig index 2ad533d..b7f23ca 100644 --- a/arch/arm64/configs/storage_ci_defconfig +++ b/arch/arm64/configs/storage_ci_defconfig @@ -373,6 +373,7 @@ CONFIG_ARM64_ERRATUM_845719=y CONFIG_ARM64_ERRATUM_843419=y CONFIG_ARM64_ERRATUM_1024718=y # CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set CONFIG_CAVIUM_ERRATUM_22375=y CONFIG_CAVIUM_ERRATUM_23144=y CONFIG_CAVIUM_ERRATUM_23154=y diff --git a/arch/arm64/configs/syzkaller_defconfig b/arch/arm64/configs/syzkaller_defconfig index 509713a..eaf5e32 100644 --- a/arch/arm64/configs/syzkaller_defconfig +++ b/arch/arm64/configs/syzkaller_defconfig @@ -385,6 +385,7 @@ CONFIG_ARM64_ERRATUM_845719=y # CONFIG_ARM64_ERRATUM_843419 is not set # CONFIG_ARM64_ERRATUM_1024718 is not set # CONFIG_ARM64_ERRATUM_1463225 is not set +# CONFIG_ARM64_ERRATUM_1542419 is not set # CONFIG_CAVIUM_ERRATUM_22375 is not set # CONFIG_CAVIUM_ERRATUM_23144 is not set # CONFIG_CAVIUM_ERRATUM_23154 is not set -- 1.8.3

1 0

[PATCH 01/33] vhost: vsock: kick send_pkt worker once device is started
by Yang Yingliang 13 May '20

13 May '20

From: Jia He <justin.he(a)arm.com> commit 0b841030625cde5f784dd62aec72d6a766faae70 upstream. Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo <n.b(a)live.com> Suggested-by: Stefano Garzarella <sgarzare(a)redhat.com> Signed-off-by: Jia He <justin.he(a)arm.com> Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by: Michael S. Tsirkin <mst(a)redhat.com> Reviewed-by: Stefano Garzarella <sgarzare(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/vhost/vsock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index 5f5c5de..bac1365 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -499,6 +499,11 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) mutex_unlock(&vq->mutex); } + /* Some packets may have been queued before the device was started, + * let's kick the send worker to send them. + */ + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); + mutex_unlock(&vsock->dev.mutex); return 0; -- 1.8.3

1 32

[PATCH 01/38] drm/edid: Fix off-by-one in DispID DTD pixel clock
by Yang Yingliang 12 May '20

12 May '20

From: Ville Syrjälä <ville.syrjala(a)linux.intel.com> commit 6292b8efe32e6be408af364132f09572aed14382 upstream. The DispID DTD pixel clock is documented as: "00 00 00 h → FF FF FF h | Pixel clock ÷ 10,000 0.01 → 167,772.16 Mega Pixels per Sec" Which seems to imply that we to add one to the raw value. Reality seems to agree as there are tiled displays in the wild which currently show a 10kHz difference in the pixel clock between the tiles (one tile gets its mode from the base EDID, the other from the DispID block). Cc: stable(a)vger.kernel.org References: https://gitlab.freedesktop.org/drm/intel/-/issues/27 Signed-off-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200423151743.18767-1-ville.… Reviewed-by: Manasi Navare <manasi.d.navare(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/drm_edid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index f5926bf5..d5dcee7 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -4706,7 +4706,7 @@ static struct drm_display_mode *drm_mode_displayid_detailed(struct drm_device *d struct drm_display_mode *mode; unsigned pixel_clock = (timings->pixel_clock[0] | (timings->pixel_clock[1] << 8) | - (timings->pixel_clock[2] << 16)); + (timings->pixel_clock[2] << 16)) + 1; unsigned hactive = (timings->hactive[0] | timings->hactive[1] << 8) + 1; unsigned hblank = (timings->hblank[0] | timings->hblank[1] << 8) + 1; unsigned hsync = (timings->hsync[0] | (timings->hsync[1] & 0x7f) << 8) + 1; -- 1.8.3

1 75

[PATCH 01/48] remoteproc: Fix wrong rvring index computation
by Yang Yingliang 12 May '20

12 May '20

From: Clement Leger <cleger(a)kalray.eu> commit 00a0eec59ddbb1ce966b19097d8a8d2f777e726a upstream. Index of rvring is computed using pointer arithmetic. However, since rvring->rvdev->vring is the base of the vring array, computation of rvring idx should be reversed. It previously lead to writing at negative indices in the resource table. Signed-off-by: Clement Leger <cleger(a)kalray.eu> Link: https://lore.kernel.org/r/20191004073736.8327-1-cleger@kalray.eu Signed-off-by: Bjorn Andersson <bjorn.andersson(a)linaro.org> Cc: Doug Anderson <dianders(a)chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/remoteproc/remoteproc_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c index abbef17..d5ff272 100644 --- a/drivers/remoteproc/remoteproc_core.c +++ b/drivers/remoteproc/remoteproc_core.c @@ -289,7 +289,7 @@ void rproc_free_vring(struct rproc_vring *rvring) { int size = PAGE_ALIGN(vring_size(rvring->len, rvring->align)); struct rproc *rproc = rvring->rvdev->rproc; - int idx = rvring->rvdev->vring - rvring; + int idx = rvring - rvring->rvdev->vring; struct fw_rsc_vdev *rsc; dma_free_coherent(rproc->dev.parent, size, rvring->va, rvring->dma); -- 1.8.3

1 95

[PATCH 001/124] ext4: fix extent_status fragmentation for plain files
by Yang Yingliang 12 May '20

12 May '20

From: Dmitry Monakhov <dmonakhov(a)gmail.com> [ Upstream commit 4068664e3cd2312610ceac05b74c4cf1853b8325 ] Extents are cached in read_extent_tree_block(); as a result, extents are not cached for inodes with depth == 0 when we try to find the extent using ext4_find_extent(). The result of the lookup is cached in ext4_map_blocks() but is only a subset of the extent on disk. As a result, the contents of extents status cache can get very badly fragmented for certain workloads, such as a random 4k read workload. File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes) ext: logical_offset: physical_offset: length: expected: flags: 0: 0.. 8191: 40960.. 49151: 8192: last,eof $ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test $ perf script | grep ext4_es_insert_extent | head -n 10 fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W Fix this by caching the extents for inodes with depth == 0 in ext4_find_extent(). [ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this newly added function is not in extents_cache.c, and to avoid potential visual confusion with ext4_es_cache_extent(). -TYT ] Signed-off-by: Dmitry Monakhov <dmonakhov(a)gmail.com> Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- fs/ext4/extents.c | 47 +++++++++++++++++++++++++++-------------------- 1 file changed, 27 insertions(+), 20 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 90862ee..0f17c54 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -510,6 +510,30 @@ int ext4_ext_check_inode(struct inode *inode) return ext4_ext_check(inode, ext_inode_hdr(inode), ext_depth(inode), 0); } +static void ext4_cache_extents(struct inode *inode, + struct ext4_extent_header *eh) +{ + struct ext4_extent *ex = EXT_FIRST_EXTENT(eh); + ext4_lblk_t prev = 0; + int i; + + for (i = le16_to_cpu(eh->eh_entries); i > 0; i--, ex++) { + unsigned int status = EXTENT_STATUS_WRITTEN; + ext4_lblk_t lblk = le32_to_cpu(ex->ee_block); + int len = ext4_ext_get_actual_len(ex); + + if (prev && (prev != lblk)) + ext4_es_cache_extent(inode, prev, lblk - prev, ~0, + EXTENT_STATUS_HOLE); + + if (ext4_ext_is_unwritten(ex)) + status = EXTENT_STATUS_UNWRITTEN; + ext4_es_cache_extent(inode, lblk, len, + ext4_ext_pblock(ex), status); + prev = lblk + len; + } +} + static struct buffer_head * __read_extent_tree_block(const char *function, unsigned int line, struct inode *inode, ext4_fsblk_t pblk, int depth, @@ -544,26 +568,7 @@ int ext4_ext_check_inode(struct inode *inode) */ if (!(flags & EXT4_EX_NOCACHE) && depth == 0) { struct ext4_extent_header *eh = ext_block_hdr(bh); - struct ext4_extent *ex = EXT_FIRST_EXTENT(eh); - ext4_lblk_t prev = 0; - int i; - - for (i = le16_to_cpu(eh->eh_entries); i > 0; i--, ex++) { - unsigned int status = EXTENT_STATUS_WRITTEN; - ext4_lblk_t lblk = le32_to_cpu(ex->ee_block); - int len = ext4_ext_get_actual_len(ex); - - if (prev && (prev != lblk)) - ext4_es_cache_extent(inode, prev, - lblk - prev, ~0, - EXTENT_STATUS_HOLE); - - if (ext4_ext_is_unwritten(ex)) - status = EXTENT_STATUS_UNWRITTEN; - ext4_es_cache_extent(inode, lblk, len, - ext4_ext_pblock(ex), status); - prev = lblk + len; - } + ext4_cache_extents(inode, eh); } return bh; errout: @@ -911,6 +916,8 @@ struct ext4_ext_path * path[0].p_bh = NULL; i = depth; + if (!(flags & EXT4_EX_NOCACHE) && depth == 0) + ext4_cache_extents(inode, eh); /* walk through the tree */ while (i) { ext_debug("depth %d: num %d, max %d\n", -- 1.8.3

1 247

[PATCH 1/2] drivers sysctl: add read and write interface of pmbus
by Yang Yingliang 11 May '20

11 May '20

From: fengsheng <fengsheng5(a)huawei.com> driver inclusion category: feature bugzilla: NA CVE: NA 1. add interface: sysctl_pmbus_write_common 2. add interface: sysctl_pmbus_read_common Signed-off-by: fengsheng <fengsheng5(a)huawei.com> Reviewed-by: wuyang <wuyang7(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/soc/hisilicon/sysctl/sysctl_drv.c | 2 +- drivers/soc/hisilicon/sysctl/sysctl_pmbus.c | 113 ++++++++++++++++++++++------ drivers/soc/hisilicon/sysctl/sysctl_pmbus.h | 16 ++++ 3 files changed, 108 insertions(+), 23 deletions(-) diff --git a/drivers/soc/hisilicon/sysctl/sysctl_drv.c b/drivers/soc/hisilicon/sysctl/sysctl_drv.c index 3899fac..c4cb157 100644 --- a/drivers/soc/hisilicon/sysctl/sysctl_drv.c +++ b/drivers/soc/hisilicon/sysctl/sysctl_drv.c @@ -48,7 +48,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #define DEBUG -#define SYSCTL_DRIVER_VERSION "1.9.39.1" +#define SYSCTL_DRIVER_VERSION "1.9.60.0" unsigned int g_sysctrl_debug; diff --git a/drivers/soc/hisilicon/sysctl/sysctl_pmbus.c b/drivers/soc/hisilicon/sysctl/sysctl_pmbus.c index 74d06a8..92eeba6 100644 --- a/drivers/soc/hisilicon/sysctl/sysctl_pmbus.c +++ b/drivers/soc/hisilicon/sysctl/sysctl_pmbus.c @@ -190,6 +190,9 @@ int InitPmbus(u8 chip_id) his_sysctrl_reg_wr(base, I2C_SS_SCL_HCNT_OFFSET, I2C_SS_SCLHCNT); /* ulSclLow > 1.5us */ his_sysctrl_reg_wr(base, I2C_SS_SCL_LCNT_OFFSET, I2C_SS_SCLLCNT); + /* set sda_hold_fs 1us > 250ns */ + his_sysctrl_reg_wr(base, I2C_SDA_HOLD_OFFSET, I2C_SS_SDA_HOLD_FS); + his_sysctrl_reg_wr(base, I2C_ENABLE_OFFSET, 0x1); debug_sysctrl_print("Initialize Pmbus end\n"); @@ -233,35 +236,36 @@ int sysctl_pmbus_cfg(u8 chip_id, u8 addr, u8 page, u32 slave_addr) return 0; } -int sysctl_pmbus_write(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 buf) +int sysctl_pmbus_write_common(u8 chip_id, u32 slave_addr, u32 data_len, u8 *buf) { u32 i = 0; u32 temp = 0; u32 loop = 0x1000; - u32 temp_data = addr; + u32 temp_data; void __iomem *base = NULL; if ((chip_id >= CHIP_ID_NUM_MAX) || - (data_len > DATA_NUM_MAX) || - (slave_addr >= SLAVE_ADDR_MAX)) { + (slave_addr >= SLAVE_ADDR_MAX) || + (!data_len) || (data_len > PMBUS_WRITE_LEN_MAX) || + (!buf)) { pr_err("[sysctl pmbus] write param err,chipid=0x%x,data_len=0x%x,slave_addr=0x%x!\n", chip_id, data_len, slave_addr); return SYSCTL_ERR_PARAM; } + /* clear all interrupt */ base = g_sysctl_pmbus_base[chip_id]; - his_sysctrl_reg_wr(base, I2C_INTR_RAW_OFFSET, 0x3ffff); + /* send: slave_addr[7bit] + write[1bit] */ his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x2 << 0x8) | slave_addr); - if (data_len != 0) { - his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, addr); - for (i = 0; i < data_len - 1; i++) - his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, 0xff & (buf >> (i * 0x8))); + /* write data */ + for (i = 0; i < data_len - 1; i++) + his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, buf[i]); - temp_data = (0xff & (buf >> (i * 0x8))); - } + /* last data should send stop */ + temp_data = buf[i]; his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x4 << 0x8) | temp_data); /* poll until send done */ @@ -273,14 +277,15 @@ int sysctl_pmbus_write(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 bu /* send data failed */ if (temp & I2C_TX_ABRT) { his_sysctrl_reg_rd(base, I2C_TX_ABRT_SRC_REG, &temp); - pr_err("[sysctl pmbus]write data fail, chip_id:0x%x,slave_addr:0x%x, addr:0x%x!\r\n", - chip_id, slave_addr, addr); + pr_err("[sysctl pmbus]write data fail, chip_id:0x%x,slave_addr:0x%x\r\n", + chip_id, slave_addr); his_sysctrl_reg_rd(base, I2C_CLR_TX_ABRT_REG, &temp); return SYSCTL_ERR_FAILED; } his_sysctrl_reg_rd(base, I2C_STATUS_REG, &temp); + /* send done */ if (temp & I2C_TX_FIFO_EMPTY) { his_sysctrl_reg_rd(base, I2C_TX_FIFO_DATA_NUM_REG, &temp); if (temp == 0) @@ -289,8 +294,8 @@ int sysctl_pmbus_write(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 bu loop--; if (loop == 0) { - pr_err("[sysctl pmbus]write data retry fail, chip_id:0x%x,slave_addr:0x%x, addr:0x%x!\r\n", - chip_id, slave_addr, addr); + pr_err("[sysctl pmbus]write data retry fail, chip_id:0x%x,slave_addr:0x%x\r\n", + chip_id, slave_addr); return SYSCTL_ERR_FAILED; } } @@ -298,7 +303,25 @@ int sysctl_pmbus_write(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 bu return SYSCTL_ERR_OK; } -static int sysctl_pmbus_read_pre(void __iomem *base, u8 addr, u32 slave_addr, u32 data_len) +int sysctl_pmbus_write(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 buf) +{ +#define TMP_LEN_MAX 5 + u8 i; + u8 tmp[TMP_LEN_MAX] = {0}; + + if (data_len > DATA_NUM_MAX) { + pr_err("[sysctl pmbus] write param err,data_len=0x%x!\n", data_len); + return SYSCTL_ERR_PARAM; + } + + tmp[0] = addr; + for (i = 0; i < data_len; i++) + tmp[i + 1] = (buf >> (i * 0x8)) & 0xff; + + return sysctl_pmbus_write_common(chip_id, slave_addr, data_len + sizeof(addr), &tmp[0]); +} + +static int sysctl_pmbus_read_pre(void __iomem *base, u32 cmd_len, u8 *cmd, u32 slave_addr, u32 data_len) { u32 i = 0; u32 fifo_num = 0; @@ -309,22 +332,29 @@ static int sysctl_pmbus_read_pre(void __iomem *base, u8 addr, u32 slave_addr, u3 return SYSCTL_ERR_PARAM; } + /* clear all interrupt */ his_sysctrl_reg_wr(base, I2C_INTR_RAW_OFFSET, 0x3ffff); + /* clear rx fifo */ his_sysctrl_reg_rd(base, I2C_RXFLR_OFFSET, &fifo_num); - debug_sysctrl_print("[sysctl_pmbus_read_byte]read pmbus , read empty rx fifo num:%d\r\n", fifo_num); for (i = 0; i < fifo_num; i++) his_sysctrl_reg_rd(base, I2C_DATA_CMD_OFFSET, &temp_byte); - his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x2 << 0x8) | slave_addr); - his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, addr); - his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x3 << 0x8) | slave_addr); + /* send cmd */ + if (cmd_len) { + his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x2 << 0x8) | slave_addr); + for (i = 0; i < cmd_len; i++) + his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, cmd[i]); + } + /* read data */ + his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, (0x3 << 0x8) | slave_addr); i = data_len; while ((i - 1) > 0) { his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, 0x100); i--; } + /* last data should send stop */ his_sysctrl_reg_wr(base, I2C_DATA_CMD_OFFSET, 0x500); return 0; @@ -366,6 +396,43 @@ static int sysctl_pmbus_wait_data(void __iomem *base, u32 data_len) return SYSCTL_ERR_OK; } +int sysctl_pmbus_read_common(u8 chip_id, struct pmbus_read_op *op) +{ + u32 ret; + u32 i = 0; + u32 temp_byte = 0; + void __iomem *base = NULL; + + if ((chip_id >= CHIP_ID_NUM_MAX) || (!op)) { + pr_err("[sysctl pmbus]read param err,chipid=0x%x!\n", chip_id); + return SYSCTL_ERR_PARAM; + } + + if ((op->slave_addr >= SLAVE_ADDR_MAX) || + (!op->data_len) || ((op->cmd_len + op->data_len) > PMBUS_READ_LEN_MAX) || + (!op->data) || ((op->cmd_len) && (!op->cmd))) { + pr_err("[sysctl pmbus]read param err,data_len=0x%x,cmd_len=0x%x,slave_addr=0x%x\n", + op->data_len, op->cmd_len, op->slave_addr); + return SYSCTL_ERR_PARAM; + } + + base = g_sysctl_pmbus_base[chip_id]; + ret = sysctl_pmbus_read_pre(base, op->cmd_len, op->cmd, op->slave_addr, op->data_len); + if (ret != SYSCTL_ERR_OK) + return ret; + + ret = sysctl_pmbus_wait_data(base, op->data_len); + if (ret != SYSCTL_ERR_OK) + return ret; + + for (i = 0; i < op->data_len; i++) { + his_sysctrl_reg_rd(base, I2C_DATA_CMD_OFFSET, &temp_byte); + op->data[i] = temp_byte & 0xff; + } + + return SYSCTL_ERR_OK; +} + int sysctl_pmbus_read(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 *buf) { u32 ret; @@ -385,7 +452,7 @@ int sysctl_pmbus_read(u8 chip_id, u8 addr, u32 slave_addr, u32 data_len, u32 *bu base = g_sysctl_pmbus_base[chip_id]; - ret = sysctl_pmbus_read_pre(base, addr, slave_addr, data_len); + ret = sysctl_pmbus_read_pre(base, sizeof(addr), &addr, slave_addr, data_len); if (ret != SYSCTL_ERR_OK) return ret; @@ -566,7 +633,7 @@ static int sysctl_cpu_convert_vol_to_vid(u32 vid_table, u32 value, u32 *vid) return SYSCTL_ERR_OK; } -int sysctl_cpu_voltage_adjust (u8 chip_id, u8 loop, u32 slave_addr, u32 value) +int sysctl_cpu_voltage_adjust(u8 chip_id, u8 loop, u32 slave_addr, u32 value) { u32 ret; u32 vid; @@ -647,5 +714,7 @@ void hip_sysctl_pmbus_exit(void) EXPORT_SYMBOL(sysctl_cpu_voltage_adjust); EXPORT_SYMBOL(sysctl_pmbus_write); EXPORT_SYMBOL(sysctl_pmbus_read); +EXPORT_SYMBOL(sysctl_pmbus_write_common); +EXPORT_SYMBOL(sysctl_pmbus_read_common); EXPORT_SYMBOL(InitPmbus); EXPORT_SYMBOL(DeInitPmbus); diff --git a/drivers/soc/hisilicon/sysctl/sysctl_pmbus.h b/drivers/soc/hisilicon/sysctl/sysctl_pmbus.h index e1a4742..ce1d83d 100644 --- a/drivers/soc/hisilicon/sysctl/sysctl_pmbus.h +++ b/drivers/soc/hisilicon/sysctl/sysctl_pmbus.h @@ -20,6 +20,13 @@ #define PAGE_NUM_MAX (0x6f) #define DATA_NUM_MAX (0x4) +#define I2C_FIFO_DEPTH (256) + +/* slave_addr use 1 fifo */ +#define PMBUS_READ_LEN_MAX (I2C_FIFO_DEPTH - 1) +/* slave_addr use 2 fifo */ +#define PMBUS_WRITE_LEN_MAX (I2C_FIFO_DEPTH - 2) + #define I2C_TX_ABRT (0x040) #define I2C_TX_ABRT_SRC_REG (0x0880) #define I2C_CLR_TX_ABRT_REG (0x0854) @@ -29,6 +36,7 @@ #define I2C_SS_SCLHCNT 0x3db #define I2C_SS_SCLLCNT 0x3e6 +#define I2C_SS_SDA_HOLD_FS 0xfa /* AVS_REG_GEN */ #define AVS_WR_OPEN_OFFSET 0x0004 @@ -77,6 +85,14 @@ #define STATUS_RPT_OFFSET 0x0AA4 #define STATUS_ERR_RPT_OFFSET 0x0AA8 +struct pmbus_read_op { + u32 slave_addr; + u32 cmd_len; + u32 data_len; + u8 *cmd; + u8 *data; +}; + /* Define the union pmbus_vout_mode */ typedef union { /* Define the struct bits */ -- 1.8.3

1 1

[PATCH 01/62] arm, bpf: Fix offset overflow for BPF_MEM BPF_DW
by Yang Yingliang 11 May '20

11 May '20

From: Luke Nelson <lukenels(a)cs.washington.edu> commit 4178417cc5359c329790a4a8f4a6604612338cca upstream. This patch fixes an incorrect check in how immediate memory offsets are computed for BPF_DW on arm. For BPF_LDX/ST/STX + BPF_DW, the 32-bit arm JIT breaks down an 8-byte access into two separate 4-byte accesses using off+0 and off+4. If off fits in imm12, the JIT emits a ldr/str instruction with the immediate and avoids the use of a temporary register. While the current check off <= 0xfff ensures that the first immediate off+0 doesn't overflow imm12, it's not sufficient for the second immediate off+4, which may cause the second access of BPF_DW to read/write the wrong address. This patch fixes the problem by changing the check to off <= 0xfff - 4 for BPF_DW, ensuring off+4 will never overflow. A side effect of simplifying the check is that it now allows using negative immediate offsets in ldr/str. This means that small negative offsets can also avoid the use of a temporary register. This patch introduces no new failures in test_verifier or test_bpf.c. Fixes: c5eae692571d6 ("ARM: net: bpf: improve 64-bit store implementation") Fixes: ec19e02b343db ("ARM: net: bpf: fix LDX instructions") Co-developed-by: Xi Wang <xi.wang(a)gmail.com> Signed-off-by: Xi Wang <xi.wang(a)gmail.com> Signed-off-by: Luke Nelson <luke.r.nels(a)gmail.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Link: https://lore.kernel.org/bpf/20200409221752.28448-1-luke.r.nels@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/net/bpf_jit_32.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-) diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 25b3ee8..d06293a 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -993,21 +993,35 @@ static inline void emit_a32_mul_r64(const s8 dst[], const s8 src[], arm_bpf_put_reg32(dst_hi, rd[0], ctx); } +static bool is_ldst_imm(s16 off, const u8 size) +{ + s16 off_max = 0; + + switch (size) { + case BPF_B: + case BPF_W: + off_max = 0xfff; + break; + case BPF_H: + off_max = 0xff; + break; + case BPF_DW: + /* Need to make sure off+4 does not overflow. */ + off_max = 0xfff - 4; + break; + } + return -off_max <= off && off <= off_max; +} + /* *(size *)(dst + off) = src */ static inline void emit_str_r(const s8 dst, const s8 src[], - s32 off, struct jit_ctx *ctx, const u8 sz){ + s16 off, struct jit_ctx *ctx, const u8 sz){ const s8 *tmp = bpf2a32[TMP_REG_1]; - s32 off_max; s8 rd; rd = arm_bpf_get_reg32(dst, tmp[1], ctx); - if (sz == BPF_H) - off_max = 0xff; - else - off_max = 0xfff; - - if (off < 0 || off > off_max) { + if (!is_ldst_imm(off, sz)) { emit_a32_mov_i(tmp[0], off, ctx); emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx); rd = tmp[0]; @@ -1036,18 +1050,12 @@ static inline void emit_str_r(const s8 dst, const s8 src[], /* dst = *(size*)(src + off) */ static inline void emit_ldx_r(const s8 dst[], const s8 src, - s32 off, struct jit_ctx *ctx, const u8 sz){ + s16 off, struct jit_ctx *ctx, const u8 sz){ const s8 *tmp = bpf2a32[TMP_REG_1]; const s8 *rd = is_stacked(dst_lo) ? tmp : dst; s8 rm = src; - s32 off_max; - - if (sz == BPF_H) - off_max = 0xff; - else - off_max = 0xfff; - if (off < 0 || off > off_max) { + if (!is_ldst_imm(off, sz)) { emit_a32_mov_i(tmp[0], off, ctx); emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx); rm = tmp[0]; -- 1.8.3

1 61

Fwd: kfifo memory ordering analysis
by laokz 11 May '20

11 May '20

openEuler Kernel SIG：你好！内核社区(包括Linus)怀疑kfifo有潜在的BUG，见 https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/l… 我于去年底向社区提交了一份分析报告，用litmus验证了问题的可能性，梳理了所有kfifo相关函数和宏，提出了建议。但杳无音信，不知是丢了，还是因无实践 BUG而未受重视。 ARM是典型的弱内存序架构，因此想到转给你们供参考。如无兴趣请忽略:-) 此致 laokz

2 4

[PATCH] net/hinic: Fix TX timeout under ipip tunnel packet
by Yang Yingliang 09 May '20

09 May '20

From: Chiqijun <chiqijun(a)huawei.com> driver inclusion category: bugfix bugzilla: 4472 ----------------------------------------------------------------------- The current driver does not support ipip tunnel packet parsing. When the csum of the device is turned on, driver will get wrong inner headers, and causing device error. Signed-off-by: Chiqijun <chiqijun(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 31 ++++++++++++++++++++++------ 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_tx.c b/drivers/net/ethernet/huawei/hinic/hinic_tx.c index 05291a5..c8492ae 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_tx.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_tx.c @@ -373,26 +373,45 @@ static int hinic_tx_csum(struct hinic_sq_task *task, u32 *queue_info, if (ip.v4->version == 4) { l3_type = IPV4_PKT_NO_CHKSUM_OFFLOAD; + l4_proto = ip.v4->protocol; } else if (ip.v4->version == 6) { + unsigned char *exthdr; + __be16 frag_off; + l3_type = IPV6_PKT; #ifdef HAVE_OUTER_IPV6_TUNNEL_OFFLOAD tunnel_type = TUNNEL_UDP_CSUM; #endif + exthdr = ip.hdr + sizeof(*ip.v6); + l4_proto = ip.v6->nexthdr; + l4.hdr = skb_transport_header(skb); + if (l4.hdr != exthdr) + ipv6_skip_exthdr(skb, exthdr - skb->data, + &l4_proto, &frag_off); } else { l3_type = UNKNOWN_L3TYPE; + l4_proto = IPPROTO_RAW; } hinic_task_set_outter_l3(task, l3_type, skb_network_header_len(skb)); - l4_tunnel_len = skb_inner_network_offset(skb) - - skb_transport_offset(skb); + if (l4_proto == IPPROTO_UDP || l4_proto == IPPROTO_GRE) { + l4_tunnel_len = skb_inner_network_offset(skb) - + skb_transport_offset(skb); + ip.hdr = skb_inner_network_header(skb); + l4.hdr = skb_inner_transport_header(skb); + network_hdr_len = skb_inner_network_header_len(skb); + } else { + tunnel_type = NOT_TUNNEL; + l4_tunnel_len = 0; - hinic_task_set_tunnel_l4(task, tunnel_type, l4_tunnel_len); + ip.hdr = skb_inner_network_header(skb); + l4.hdr = skb_transport_header(skb); + network_hdr_len = skb_network_header_len(skb); + } - ip.hdr = skb_inner_network_header(skb); - l4.hdr = skb_inner_transport_header(skb); - network_hdr_len = skb_inner_network_header_len(skb); + hinic_task_set_tunnel_l4(task, tunnel_type, l4_tunnel_len); } else { ip.hdr = skb_network_header(skb); l4.hdr = skb_transport_header(skb); -- 1.8.3

1 0

[PATCH 1/3] USB: core: Fix free-while-in-use bug in the USB S-Glibrary
by Yang Yingliang 09 May '20

09 May '20

From: Alan Stern <stern(a)rowland.harvard.edu> mainline inclusion from mainline-v5.7-rc3 commit 056ad39ee9253873522f6469c3364964a322912b category: bugfix bugzilla: 13690 CVE: CVE-2020-12464 ------------------------------------------------- FuzzUSB (a variant of syzkaller) found a free-while-still-in-use bug in the USB scatter-gather library: BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] BUG: KASAN: use-after-free in usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 Read of size 4 at addr ffff888065379610 by task kworker/u4:1/27 CPU: 1 PID: 27 Comm: kworker/u4:1 Not tainted 5.5.11 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Workqueue: scsi_tmf_2 scmd_eh_abort_handler Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x153/0x1cb mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:639 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x152/0x1b0 mm/kasan/generic.c:192 __kasan_check_read+0x11/0x20 mm/kasan/common.c:95 atomic_read include/asm-generic/atomic-instrumented.h:26 [inline] usb_hcd_unlink_urb+0x5f/0x170 drivers/usb/core/hcd.c:1607 usb_unlink_urb+0x72/0xb0 drivers/usb/core/urb.c:657 usb_sg_cancel+0x14e/0x290 drivers/usb/core/message.c:602 usb_stor_stop_transport+0x5e/0xa0 drivers/usb/storage/transport.c:937 This bug occurs when cancellation of the S-G transfer races with transfer completion. When that happens, usb_sg_cancel() may continue to access the transfer's URBs after usb_sg_wait() has freed them. The bug is caused by the fact that usb_sg_cancel() does not take any sort of reference to the transfer, and so there is nothing to prevent the URBs from being deallocated while the routine is trying to use them. The fix is to take such a reference by incrementing the transfer's io->count field while the cancellation is in progres and decrementing it afterward. The transfer's URBs are not deallocated until io->complete is triggered, which happens when io->count reaches zero. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-and-tested-by: Kyungtae Kim <kt0755(a)gmail.com> CC: <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.2003281615140.14837-100000@netrid… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/usb/core/message.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 0d3fd20..fcf84bf 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -588,12 +588,13 @@ void usb_sg_cancel(struct usb_sg_request *io) int i, retval; spin_lock_irqsave(&io->lock, flags); - if (io->status) { + if (io->status || io->count == 0) { spin_unlock_irqrestore(&io->lock, flags); return; } /* shut everything down */ io->status = -ECONNRESET; + io->count++; /* Keep the request alive until we're done */ spin_unlock_irqrestore(&io->lock, flags); for (i = io->entries - 1; i >= 0; --i) { @@ -607,6 +608,12 @@ void usb_sg_cancel(struct usb_sg_request *io) dev_warn(&io->dev->dev, "%s, unlink --> %d\n", __func__, retval); } + + spin_lock_irqsave(&io->lock, flags); + io->count--; + if (!io->count) + complete(&io->complete); + spin_unlock_irqrestore(&io->lock, flags); } EXPORT_SYMBOL_GPL(usb_sg_cancel); -- 1.8.3

1 2

[PATCH 1/2] net: hns3: update hns3 version to 1.9.37.9
by Yang Yingliang 09 May '20

09 May '20

From: Shengzui You <youshengzui(a)huawei.com> driver inclusion category: other bugzilla: NA CVE: NA --------------------------------- This patch is used to modify the hns3 driver version to 1.9.37.9 Signed-off-by: Shengzui You <youshengzui(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Zhaohui Zhong <zhongzhaohui(a)huawei.com> Reviewed-by: Junxin Chen <chenjunxin1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index 5253374..14b3991 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -30,7 +30,7 @@ #include <linux/pci.h> #include <linux/types.h> -#define HNAE3_MOD_VERSION "1.9.37.8" +#define HNAE3_MOD_VERSION "1.9.37.9" #define HNAE3_MIN_VECTOR_NUM 2 /* first one for misc, another for IO */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h index 34ff097..b89b110 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h @@ -4,7 +4,7 @@ #ifndef __HNS3_CAE_VERSION_H__ #define __HNS3_CAE_VERSION_H__ -#define HNS3_CAE_MOD_VERSION "1.9.37.8" +#define HNS3_CAE_MOD_VERSION "1.9.37.9" #define CMT_ID_LEN 8 #define RESV_LEN 3 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 4567c2c..62f34e9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -8,7 +8,7 @@ #include "hnae3.h" -#define HNS3_MOD_VERSION "1.9.37.8" +#define HNS3_MOD_VERSION "1.9.37.9" extern char hns3_driver_version[]; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 80270e4..15af034 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -12,7 +12,7 @@ #include "hclge_cmd.h" #include "hnae3.h" -#define HCLGE_MOD_VERSION "1.9.37.8" +#define HCLGE_MOD_VERSION "1.9.37.9" #define HCLGE_DRIVER_NAME "hclge" #define HCLGE_MAX_PF_NUM 8 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index bd24595..f89ee1b 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -10,7 +10,7 @@ #include "hclgevf_cmd.h" #include "hnae3.h" -#define HCLGEVF_MOD_VERSION "1.9.37.8" +#define HCLGEVF_MOD_VERSION "1.9.37.9" #define HCLGEVF_DRIVER_NAME "hclgevf" #define HCLGEVF_MAX_VLAN_ID 4095 -- 1.8.3

1 1

[PATCH] Revert "scsi: fix failing unload of a LLDD module"
by Yang Yingliang 09 May '20

09 May '20

From: Ye Bin <yebin10(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34271 CVE: NA -------------------------------- This reverts commit fd72360bc94ad304136beb56e8ff2ec089113bb8. test setp: ... rmmod hisi_sas_v3_hw lsmod fdisk -l insomd hisi_sas_v3_hw.ko lsmod fdisk -l .... We get follow error when we test by above test steps. [ 3660.259153] [ffff00000116f000] pgd=00002027ffffe003, pud=00002027ffffd003, pmd=00002027cdf28003, pte=0000000000000000 [ 3660.269719] Internal error: Oops: 96000007 [#1] PREEMPT SMP [ 3660.275266] Modules linked in: hisi_sas_v3_hw(+) hisi_sas_main hns_roce_hw_v2(O) hns_roce(O) rpcrdma ib_isert iscsi_target_mod ib_iser libiscsi scsi_transport_iscsi ib_ipoib ib_umad realtek hns3(O) hclge(O) hnae3(O) crc32_ce crct10dif_ce hisi_hpre hisi_zip hisi_qm uacce hisi_trng_v2 rng_core sfc lbc ip_tables x_tables libsas scsi_transport_sas [last unloaded: hisi_sas_main] [ 3660.308227] Process smartd (pid: 19570, stack limit = 0x000000001103634d) [ 3660.314985] CPU: 31 PID: 19570 Comm: smartd Kdump: loaded Tainted: G O 4.19.36-g32894fc #1 [ 3660.324504] Hardware name: Huawei TaiShan 200 (Model 2280)/BC82AMDD, BIOS 2280-V2 CS V3.B220.02 03/27/2020 [ 3660.334110] pstate: 60400009 (nZCv daif +PAN -UAO) [ 3660.338882] pc : scsi_device_put+0x18/0x38 [ 3660.342961] lr : scsi_disk_put+0x3c/0x58 [ 3660.346865] sp : ffff0000158a3cb0 [ 3660.350164] x29: ffff0000158a3cb0 x28: ffff8027b8111000 [ 3660.355451] x27: 00000000080a005d x26: 0000000000000000 [ 3660.360738] x25: ffff8027c6310398 x24: ffff8027cd2ec410 [ 3660.366025] x23: ffff000009811000 x22: ffff80276d274750 [ 3660.371312] x21: ffff8027abdd5000 x20: ffff8027b8110800 [ 3660.376599] x19: ffff8027abdd5000 x18: 0000000000000000 [ 3660.381886] x17: 0000000000000000 x16: 0000000000000000 [ 3660.387172] x15: 0000000000000000 x14: 0000000000000000 [ 3660.392459] x13: ffff000009996cd0 x12: ffffffffffffffff [ 3660.397746] x11: ffff000009996cc8 x10: 0000000000000000 [ 3660.403033] x9 : 0000000000000000 x8 : 0000000040000000 [ 3660.408320] x7 : ffff0000098116c8 x6 : 0000000000000000 [ 3660.413607] x5 : ffff00000820ebbc x4 : ffff7e009eb8fb20 [ 3660.418894] x3 : 0000000080400009 x2 : ffff8027ae3ec600 [ 3660.424180] x1 : 71b6030ca20bb300 x0 : ffff00000116f000 [ 3660.429467] Call trace: [ 3660.431904] scsi_device_put+0x18/0x38 [ 3660.435636] scsi_disk_put+0x3c/0x58 [ 3660.439195] sd_release+0x50/0xc0 [ 3660.442496] __blkdev_put+0x20c/0x220 [ 3660.446141] blkdev_put+0x4c/0x110 [ 3660.449527] blkdev_close+0x1c/0x28 [ 3660.453000] __fput+0x88/0x1b8 [ 3660.456042] ____fput+0xc/0x18 [ 3660.459085] task_work_run+0x94/0xb0 [ 3660.462646] do_notify_resume+0x17c/0x180 [ 3660.466637] work_pending+0x8/0x10 [ 3660.470022] Code: f9000bf3 aa0003f3 f9400000 f9404c00 (f9400000) [ 3660.476089] ---[ end trace ca1d0144f9241f71 ]--- void scsi_device_put(struct scsi_device *sdev) { module_put(sdev->host->hostt->module); ---> error code put_device(&sdev->sdev_gendev); } When access "sdev->host->hostt" occurs exception, as "sdev->host->hostt" is point to the module address space which is already removed. module_delete first check module reference count, then call module exit function. So after pass module reference count check and before call module exit, we can call scsi_device_get function successfully. As "scsi: fix failing unload of a LLDD module" lead to call scsi_device_get success during remove module. We revert this patch, "scsi: fixup kernel warning during rmmod()" already fixed previous error. Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/scsi.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c index 7d472c2..fc1356d 100644 --- a/drivers/scsi/scsi.c +++ b/drivers/scsi/scsi.c @@ -544,6 +544,9 @@ int scsi_report_opcode(struct scsi_device *sdev, unsigned char *buffer, * Description: Gets a reference to the scsi_device and increments the use count * of the underlying LLDD module. You must hold host_lock of the * parent Scsi_Host or already have a reference when calling this. + * + * This will fail if a device is deleted or cancelled, or when the LLD module + * is in the process of being unloaded. */ int scsi_device_get(struct scsi_device *sdev) { @@ -551,12 +554,12 @@ int scsi_device_get(struct scsi_device *sdev) goto fail; if (!get_device(&sdev->sdev_gendev)) goto fail; - /* We can fail try_module_get if we're doing SCSI operations - * from module exit (like cache flush) - */ - __module_get(sdev->host->hostt->module); + if (!try_module_get(sdev->host->hostt->module)) + goto fail_put_device; return 0; +fail_put_device: + put_device(&sdev->sdev_gendev); fail: return -ENXIO; } -- 1.8.3

1 0

[PATCH] s390/mm: fix page table upgrade vs 2ndary address mode accesses
by Yang Yingliang 09 May '20

09 May '20

From: Christian Borntraeger <borntraeger(a)de.ibm.com> mainline inclusion from mainline-v5.7-rc4 commit 316ec154810960052d4586b634156c54d0778f74 category: bugfix bugzilla: 13690 CVE: CVE-2020-11884 ------------------------------------------------- A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable(a)vger.kernel.org # 4.15+ Reported-by: Al Viro <viro(a)zeniv.linux.org.uk> Reviewed-by: Gerald Schaefer <gerald.schaefer(a)de.ibm.com> References: CVE-2020-11884 Signed-off-by: Christian Borntraeger <borntraeger(a)de.ibm.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/s390/lib/uaccess.c | 4 ++++ arch/s390/mm/pgalloc.c | 16 ++++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c index c4f8039..0267405 100644 --- a/arch/s390/lib/uaccess.c +++ b/arch/s390/lib/uaccess.c @@ -64,10 +64,13 @@ mm_segment_t enable_sacf_uaccess(void) { mm_segment_t old_fs; unsigned long asce, cr; + unsigned long flags; old_fs = current->thread.mm_segment; if (old_fs & 1) return old_fs; + /* protect against a concurrent page table upgrade */ + local_irq_save(flags); current->thread.mm_segment |= 1; asce = S390_lowcore.kernel_asce; if (likely(old_fs == USER_DS)) { @@ -83,6 +86,7 @@ mm_segment_t enable_sacf_uaccess(void) __ctl_load(asce, 7, 7); set_cpu_flag(CIF_ASCE_SECONDARY); } + local_irq_restore(flags); return old_fs; } EXPORT_SYMBOL(enable_sacf_uaccess); diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c index 814f265..f3bc9c9 100644 --- a/arch/s390/mm/pgalloc.c +++ b/arch/s390/mm/pgalloc.c @@ -72,8 +72,20 @@ static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; - if (current->active_mm == mm) - set_user_asce(mm); + /* we must change all active ASCEs to avoid the creation of new TLBs */ + if (current->active_mm == mm) { + S390_lowcore.user_asce = mm->context.asce; + if (current->thread.mm_segment == USER_DS) { + __ctl_load(S390_lowcore.user_asce, 1, 1); + /* Mark user-ASCE present in CR1 */ + clear_cpu_flag(CIF_ASCE_PRIMARY); + } + if (current->thread.mm_segment == USER_DS_SACF) { + __ctl_load(S390_lowcore.user_asce, 7, 7); + /* enable_sacf_uaccess does all or nothing */ + WARN_ON(!test_cpu_flag(CIF_ASCE_SECONDARY)); + } + } __tlb_flush_local(); } -- 1.8.3

1 0

[PATCH kernel-4.19] kernel: just for testing
by Xie XiuQi 07 May '20

07 May '20

just for testing openeuler kernel ci. Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- init/version.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/version.c b/init/version.c index ef4012ec4375..b8871517a6b2 100644 --- a/init/version.c +++ b/init/version.c @@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(init_uts_ns); /* FIXED STRINGS! Don't touch! */ const char linux_banner[] = - "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" + "Linux Version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n"; const char linux_proc_banner[] = -- 2.20.1

1 0

[PATCH kernel-4.19] kernel: just for testing
by Xie XiuQi 07 May '20

07 May '20

just for testing openeuler kernel ci. Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- init/version.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/init/version.c b/init/version.c index ef4012ec4375..b8871517a6b2 100644 --- a/init/version.c +++ b/init/version.c @@ -43,7 +43,7 @@ EXPORT_SYMBOL_GPL(init_uts_ns); /* FIXED STRINGS! Don't touch! */ const char linux_banner[] = - "Linux version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" + "Linux Version " UTS_RELEASE " (" LINUX_COMPILE_BY "@" LINUX_COMPILE_HOST ") (" LINUX_COMPILER ") " UTS_VERSION "\n"; const char linux_proc_banner[] = -- 2.20.1

1 0

[PATCH 1/3] blk-mq: use static_rqs instead of rqs to iterate tags
by Yang Yingliang 06 May '20

06 May '20

From: yu kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34280 CVE: NA --------------------------- tags->rqs[] will not been cleaned when free driver tag to avoid an extra store on a shared area in the per io path. But there is a window between get driver tag and write tags->rqs[], so we may see stale rq in tags->rqs[] which may have been freed, as the following case: blk_mq_get_request blk_mq_queue_tag_busy_iter -> blk_mq_get_tag -> bt_for_each -> bt_iter -> rq = tags->rqs[] -> rq->q -> blk_mq_rq_ctx_init -> data->hctx->tags->rqs[rq->tag] = rq; In additiion, tags->rqs[] only contains the requests that get driver tag. It is not accurate for io-scheduler case when account busy tags in part_in_flight. To fix both of them, the blk_mq_queue_tag_busy_iter is changed in this patch to use tags->static_rqs[] instead of tags->rqs[]. We have to identify whether there is a io scheduler attached to decide to use hctx->tags or hctx->sched_tags. And we will try to get a non-zero q_usage_counter before that, then could avoid race with update nr_hw_queues, switch io-scheduler and even queue cleanup. Add 'inflight' parameter to determine to iterate in-flight requests or just busy tags and add a new helper interface blk_mq_queue_tag_inflight_iter to iterate all of the in-flight tags and export this interface for drivers. Signed-off-by: yu kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-mq-tag.c | 77 ++++++++++++++++++++++++++++++++++++++++---------- block/blk-mq.c | 6 ++-- include/linux/blk-mq.h | 3 +- 3 files changed, 67 insertions(+), 19 deletions(-) diff --git a/block/blk-mq-tag.c b/block/blk-mq-tag.c index 41317c5..323bbca 100644 --- a/block/blk-mq-tag.c +++ b/block/blk-mq-tag.c @@ -216,37 +216,51 @@ struct bt_iter_data { busy_iter_fn *fn; void *data; bool reserved; + bool inflight; }; static bool bt_iter(struct sbitmap *bitmap, unsigned int bitnr, void *data) { struct bt_iter_data *iter_data = data; struct blk_mq_hw_ctx *hctx = iter_data->hctx; - struct blk_mq_tags *tags = hctx->tags; bool reserved = iter_data->reserved; + struct blk_mq_tags *tags; struct request *rq; + tags = hctx->sched_tags ? hctx->sched_tags : hctx->tags; + if (!reserved) bitnr += tags->nr_reserved_tags; - rq = tags->rqs[bitnr]; /* - * We can hit rq == NULL here, because the tagging functions - * test and set the bit before assining ->rqs[]. + * Because tags->rqs[] will not been cleaned when free driver tag + * and there is a window between get driver tag and write tags->rqs[], + * so we may see stale rq in tags->rqs[] which may have been freed. + * Using static_rqs[] is safer. */ - if (rq && rq->q == hctx->queue) + rq = tags->static_rqs[bitnr]; + + /* + * There is a small window between get tag and blk_mq_rq_ctx_init, + * so rq->q and rq->mq_hctx maybe different. + */ + if (rq && rq->q == hctx->queue && + (!iter_data->inflight || + blk_mq_rq_state(rq) == MQ_RQ_IN_FLIGHT)) iter_data->fn(hctx, rq, iter_data->data, reserved); return true; } -static void bt_for_each(struct blk_mq_hw_ctx *hctx, struct sbitmap_queue *bt, - busy_iter_fn *fn, void *data, bool reserved) +static void bt_for_each(struct blk_mq_hw_ctx *hctx, + struct sbitmap_queue *bt, busy_iter_fn *fn, + void *data, bool reserved, bool inflight) { struct bt_iter_data iter_data = { .hctx = hctx, .fn = fn, .data = data, .reserved = reserved, + .inflight = inflight, }; sbitmap_for_each_set(&bt->sb, bt_iter, &iter_data); @@ -314,22 +328,23 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset, } EXPORT_SYMBOL(blk_mq_tagset_busy_iter); -void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, - void *priv) +static void __blk_mq_queue_tag_busy_iter(struct request_queue *q, + busy_iter_fn *fn, void *priv, bool inflight) { struct blk_mq_hw_ctx *hctx; int i; /* - * __blk_mq_update_nr_hw_queues will update the nr_hw_queues and - * queue_hw_ctx after freeze the queue, so we use q_usage_counter - * to avoid race with it. + * Get a reference of the queue unless it has been zero. We use this + * to avoid the race with the code that would modify the hctxs after + * freeze and drain the queue, including updating nr_hw_queues, io + * scheduler switching and queue clean up. */ if (!percpu_ref_tryget(&q->q_usage_counter)) return; queue_for_each_hw_ctx(q, hctx, i) { - struct blk_mq_tags *tags = hctx->tags; + struct blk_mq_tags *tags; /* * If not software queues are currently mapped to this @@ -338,13 +353,45 @@ void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, if (!blk_mq_hw_queue_mapped(hctx)) continue; + tags = hctx->sched_tags ? hctx->sched_tags : hctx->tags; + if (tags->nr_reserved_tags) - bt_for_each(hctx, &tags->breserved_tags, fn, priv, true); - bt_for_each(hctx, &tags->bitmap_tags, fn, priv, false); + bt_for_each(hctx, &tags->breserved_tags, + fn, priv, true, inflight); + bt_for_each(hctx, &tags->bitmap_tags, + fn, priv, false, inflight); + /* + * flush_rq represents the rq with REQ_PREFLUSH and REQ_FUA + * (if FUA is not supported by device) to be issued to + * device. So we need to consider it when iterate inflight + * rqs, but needn't to count it when iterate busy tags. + */ + if (inflight && + blk_mq_rq_state(hctx->fq->flush_rq) == MQ_RQ_IN_FLIGHT) + fn(hctx, hctx->fq->flush_rq, priv, false); } blk_queue_exit(q); } +/* + * Iterate all the busy tags including pending and in-flight ones. + */ +void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn, + void *priv) +{ + __blk_mq_queue_tag_busy_iter(q, fn, priv, false); +} + +/* + * Iterate all the inflight tags. + */ +void blk_mq_queue_tag_inflight_iter(struct request_queue *q, + busy_iter_fn *fn, void *priv) +{ + __blk_mq_queue_tag_busy_iter(q, fn, priv, true); +} +EXPORT_SYMBOL(blk_mq_queue_tag_inflight_iter); + static int bt_alloc(struct sbitmap_queue *bt, unsigned int depth, bool round_robin, int node) { diff --git a/block/blk-mq.c b/block/blk-mq.c index 8a7c3d8..ee07575 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -112,7 +112,7 @@ void blk_mq_in_flight(struct request_queue *q, struct hd_struct *part, struct mq_inflight mi = { .part = part, .inflight = inflight, }; inflight[0] = inflight[1] = 0; - blk_mq_queue_tag_busy_iter(q, blk_mq_check_inflight, &mi); + blk_mq_queue_tag_inflight_iter(q, blk_mq_check_inflight, &mi); } static void blk_mq_check_inflight_rw(struct blk_mq_hw_ctx *hctx, @@ -131,7 +131,7 @@ void blk_mq_in_flight_rw(struct request_queue *q, struct hd_struct *part, struct mq_inflight mi = { .part = part, .inflight = inflight, }; inflight[0] = inflight[1] = 0; - blk_mq_queue_tag_busy_iter(q, blk_mq_check_inflight_rw, &mi); + blk_mq_queue_tag_inflight_iter(q, blk_mq_check_inflight_rw, &mi); } void blk_freeze_queue_start(struct request_queue *q) @@ -875,7 +875,7 @@ static void blk_mq_timeout_work(struct work_struct *work) if (!percpu_ref_tryget(&q->q_usage_counter)) return; - blk_mq_queue_tag_busy_iter(q, blk_mq_check_expired, &next); + blk_mq_queue_tag_inflight_iter(q, blk_mq_check_expired, &next); if (next != 0) { mod_timer(&q->timeout, next); diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 6578070..149d411 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -320,7 +320,8 @@ void blk_mq_tagset_busy_iter(struct blk_mq_tag_set *tagset, void blk_mq_freeze_queue_wait(struct request_queue *q); int blk_mq_freeze_queue_wait_timeout(struct request_queue *q, unsigned long timeout); - +void blk_mq_queue_tag_inflight_iter(struct request_queue *q, busy_iter_fn *fn, + void *priv); int blk_mq_map_queues(struct blk_mq_tag_set *set); void blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, int nr_hw_queues); -- 1.8.3

1 2

[PATCH] perf: Make perf able to build with latest libbfd
by Yang Yingliang 06 May '20

06 May '20

From: Changbin Du <changbin.du(a)gmail.com> mainline inclusion from mainline-5.6 commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 category: bugfix bugzilla: 34555 CVE: NA ------------------------------------------------- libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits: o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html This fix make perf able to build with both old and new libbfd. Signed-off-by: Changbin Du <changbin.du(a)gmail.com> Acked-by: Jiri Olsa <jolsa(a)redhat.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- tools/perf/util/srcline.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/srcline.c b/tools/perf/util/srcline.c index af3f9b9..b8e7761 100644 --- a/tools/perf/util/srcline.c +++ b/tools/perf/util/srcline.c @@ -191,16 +191,30 @@ static void find_address_in_section(bfd *abfd, asection *section, void *data) bfd_vma pc, vma; bfd_size_type size; struct a2l_data *a2l = data; + flagword flags; if (a2l->found) return; - if ((bfd_get_section_flags(abfd, section) & SEC_ALLOC) == 0) +#ifdef bfd_get_section_flags + flags = bfd_get_section_flags(abfd, section); +#else + flags = bfd_section_flags(section); +#endif + if ((flags & SEC_ALLOC) == 0) return; pc = a2l->addr; +#ifdef bfd_get_section_vma vma = bfd_get_section_vma(abfd, section); +#else + vma = bfd_section_vma(section); +#endif +#ifdef bfd_get_section_size size = bfd_get_section_size(section); +#else + size = bfd_section_size(section); +#endif if (pc < vma || pc >= vma + size) return; -- 1.8.3

1 0

hello
by chenzy 30 Apr '20

30 Apr '20

subscribe linux-kernel

3 2

[PATCH] pcie_cae support getting chipnums of this system
by Yang Yingliang 28 Apr '20

28 Apr '20

From: Liu Yanshi <liuyanshi(a)huawei.com> driver inclusion category: feature bugzilla: NA CVE: NA pcie_cae add interface to get the chipnums of the current system. Signed-off-by: Liu Yanshi <liuyanshi(a)huawei.com> Reviewed-by: Zhu Xiongxiong <zhuxiongxiong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../controller/hisi-pcie-customer/hisi_pcie_cae.c | 37 ++++++++++++++++++++-- 1 file changed, 34 insertions(+), 3 deletions(-) diff --git a/drivers/pci/controller/hisi-pcie-customer/hisi_pcie_cae.c b/drivers/pci/controller/hisi-pcie-customer/hisi_pcie_cae.c index 8d0c801..6229a54 100644 --- a/drivers/pci/controller/hisi-pcie-customer/hisi_pcie_cae.c +++ b/drivers/pci/controller/hisi-pcie-customer/hisi_pcie_cae.c @@ -3,6 +3,7 @@ #include <linux/mm.h> #include <linux/miscdevice.h> +#include <linux/uaccess.h> #include <linux/device.h> #include <linux/module.h> #include <linux/io.h> @@ -21,6 +22,7 @@ #define CHIP_INFO_REG_SIZE 4 #define TYPE_SHIFT 4 #define BIT_SHIFT_8 8 +#define PCIE_CMD_GET_CHIPNUMS 0x01 #define DEVICE_NAME "pcie_reg_dev" @@ -37,7 +39,7 @@ enum { MMAP_TYPE_VIRTIO }; -static int current_chip_nums; +static u32 current_chip_nums; static const struct vm_operations_struct mmap_pcie_mem_ops = { #ifdef CONFIG_HAVE_IOREMAP_PROT @@ -100,10 +102,10 @@ static int pcie_reg_mmap(struct file *filep, struct vm_area_struct *vma) return 0; } -int pcie_get_chipnums(u32 cpu_info) +u32 pcie_get_chipnums(u32 cpu_info) { int i; - int chip_count = 0; + u32 chip_count = 0; u32 chip_i_info; for (i = 0; i < MAX_CHIP_NUM; i++) { @@ -144,12 +146,41 @@ static int pcie_release(struct inode *inode, struct file *f) return 0; } +static long pcie_reg_ioctl(struct file *pfile, unsigned int cmd, + unsigned long arg) +{ + int ret = 0; + + switch (cmd) { + case PCIE_CMD_GET_CHIPNUMS: + if ((void *)arg == NULL) { + pr_info("[PCIe Base] invalid arg address\n"); + ret = -EINVAL; + break; + } + + if (copy_to_user((void *)arg, (void *)&current_chip_nums, + sizeof(int))) { + pr_info("[PCIe Base] copy chip_nums to usr failed\n"); + ret = -EINVAL; + } + break; + + default: + pr_info("[PCIe Base] invalid pcie ioctl cmd:%u\n", cmd); + break; + } + + return ret; +} + static const struct file_operations pcie_dfx_fops = { .owner = THIS_MODULE, .open = pcie_open, .release = pcie_release, .llseek = noop_llseek, .mmap = pcie_reg_mmap, + .unlocked_ioctl = pcie_reg_ioctl, }; static struct miscdevice pcie_dfx_misc = { -- 1.8.3

1 0

[PATCH v2] net: hns3: remove the unnecessary ccflags
by Zhengyuan Liu 28 Apr '20

28 Apr '20

category: other bugzilla: NA CVE: NA ---------------------------------- The ccflags removed in this patch shouldn't be in open kernel tree. Especially for -fstack-protector-strong, there will be a compile error when CONFIG_STACKPROTECTOR_STRONG isn't enabled. Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)tj.kylinos.cn> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 9 --------- 1 file changed, 9 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81..0365f1c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -3,15 +3,6 @@ # Makefile for the HISILICON network device drivers. # -# Add security options -ccflags-y += -fstack-protector-strong -ccflags-y += -Wl,-z,relro,-z,now -ccflags-y += -Wl,-z,noexecstack -ccflags-y += -D_FORTIFY_SOURCE=2 -O2 -ccflags-y += -fvisibility=hidden -ccflags-y += -Wformat=2 -Wfloat-equal -ccflags-y += -fsigned-char - ccflags-y += -DCONFIG_IT_VALIDATION ccflags-y += -DCONFIG_HNS3_TEST -- 2.7.4

3 2

Re: [Infra] Re: [Community] 转发：gitee上已更新issue，请及时查收
by Fred Li 27 Apr '20

27 Apr '20

cc kernel(a)openeuler.org. Just for members who may not know, dwadm(a)pcl.ac.cn is from 鹏程实验室 and will help on issues related with VMs in 鹏程实验室。 On Sun, Apr 26, 2020 at 10:08 AM Xie XiuQi via Infra <infra(a)openeuler.org> wrote: > 感谢你的热心参与，我们正在和鹏程实验室的兄弟联合定位 > On 2020/4/25 13:30, Qichen Zhang wrote: > > > Qichen Zhang > 邮箱：17852657226(a)163.com > > <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?ftlId=1&n…> > > 签名由网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制 > > --------- 转发的邮件 --------- > 发件人： Qichen Zhang <17852657226(a)163.com> > 发送日期： 2020年04月25日 13:26 > 收件人： Xiehong (Cynthia) <xiehong(a)huawei.com> > 抄送人： > 主题：回复：gitee上已更新issue，请及时查收 > 各位工程师 > 你们好! > > bug依然存在，还是报Message > kernel watchdog Bug soft lockup > 在issue上已发布，昨晚上七点多一直等到今天凌晨一点，依然存在bug。 > > 请各位工程师看看如何解决? > 上周五发现的这个bug，不能这么愣着啊 > 你们需要我做什么，阔以直接给我说哈， > 我叫张琦琛，手机号同微信号17852657226 > 希望大家一起努力尽快解决这个bug > > 盼回复 > > > Qichen Zhang > 邮箱：17852657226(a)163.com > > <https://maas.mail.163.com/dashi-web-extend/html/proSignature.html?ftlId=1&n…> > > 签名由网易邮箱大师 <https://mail.163.com/dashi/dlpro.html?from=mail88> 定制 > > 在2020年04月21日 14:17，Xiehong (Cynthia) <xiehong(a)huawei.com> 写道： > > HI > > > > 多谢！ > > > > 我们会在社区上的ISSUE系统上继续跟踪。 > > > > > > *发件人:* Qichen Zhang [mailto:17852657226@163.com] > *发送时间:* 2020年4月21日 13:27 > *收件人:* Xiehong (Cynthia) <xiehong(a)huawei.com> > *主题:* gitee上已更新issue，请及时查收 > > > > 尊敬的工程师 > > 您好！ > > > > 我已在 gitee 上已更新issue，请及时查收 > > https://gitee.com/openeuler/community/issues/I1F13I?from=project-issue > > 很乐意和大家一块解决这个bug。 > > — — > > Qichen Zhang > > > _______________________________________________ > Community mailing list -- community(a)openeuler.org > To unsubscribe send an email to community-leave(a)openeuler.org > > _______________________________________________ > Infra mailing list -- infra(a)openeuler.org > To unsubscribe send an email to infra-leave(a)openeuler.org > -- Regards Fred Li (李永乐)

1 0

[PATCH 01/25] net: hns3: merge mac state HCLGE_MAC_TO_DEL and HCLGE_MAC_DEL_FAIL
by Yang Yingliang 26 Apr '20

26 Apr '20

From: shenhao <shenhao21(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA -------------------------------------------- HCLGE_MAC_DEL_FAIL is a middle state for mac address handling, it can be merged with HCLGE_MAC_TO_DEL. Btw, this patch also change the enum name from HCLGE_MAC_ADDR_STATE to HCLGE_MAC_NODE_STATE, for it's used to indicate the state of mac node. Signed-off-by: Jian Shen <shenjian15(a)huawei.com> Signed-off-by: shenhao <shenhao21(a)huawei.com> Reviewed-by: Zhong Zhaohui <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 46 ++++++++++------------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 9 ++--- 2 files changed, 25 insertions(+), 30 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 478a3b5..d985c68 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -7422,14 +7422,13 @@ static void hclge_update_umv_space(struct hclge_vport *vport, bool is_free) return NULL; } -static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, - enum HCLGE_MAC_ADDR_STATE state) +static void hclge_update_mac_node(struct hclge_vport_mac_addr_cfg *mac_node, + enum HCLGE_MAC_NODE_STATE state) { switch (state) { /* from set_rx_mode or tmp_add_list */ case HCLGE_MAC_TO_ADD: - if (mac_node->state == HCLGE_MAC_TO_DEL || - mac_node->state == HCLGE_MAC_DEL_FAIL) + if (mac_node->state == HCLGE_MAC_TO_DEL) mac_node->state = HCLGE_MAC_ACTIVE; break; /* only from set_rx_mode */ @@ -7442,14 +7441,7 @@ static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, } break; /* only from tmp_add_list, the mac_node->state won't be - * HCLGE_MAC_ACTIVE/HCLGE_MAC_DEL_FAIL/HCLGE_MAC_ADD_FAIL - */ - case HCLGE_MAC_DEL_FAIL: - if (mac_node->state == HCLGE_MAC_TO_ADD) - mac_node->state = HCLGE_MAC_ACTIVE; - break; - /* only from tmp_add_list, the mac_node->state won't be - * HCLGE_MAC_ACTIVE/HCLGE_MAC_DEL_FAIL/HCLGE_MAC_ADD_FAIL + * ACTIVE. */ case HCLGE_MAC_ACTIVE: if (mac_node->state == HCLGE_MAC_TO_ADD) @@ -7460,7 +7452,7 @@ static void hclge_mac_node_convert(struct hclge_vport_mac_addr_cfg *mac_node, } int hclge_update_mac_list(struct hclge_vport *vport, - enum HCLGE_MAC_ADDR_STATE state, + enum HCLGE_MAC_NODE_STATE state, enum HCLGE_MAC_ADDR_TYPE mac_type, const unsigned char *addr) { @@ -7480,7 +7472,7 @@ int hclge_update_mac_list(struct hclge_vport *vport, */ mac_node = hclge_find_mac_node(list, addr); if (mac_node) { - hclge_mac_node_convert(mac_node, state); + hclge_update_mac_node(mac_node, state); spin_unlock_bh(&vport->mac_list_lock); return 0; } @@ -7731,7 +7723,6 @@ static void hclge_unsync_mac_list(struct hclge_vport *vport, list_del(&mac_node->node); kfree(mac_node); } else { - mac_node->state = HCLGE_MAC_DEL_FAIL; set_bit(HCLGE_VPORT_STATE_MAC_TBL_CHANGE, &vport->state); break; @@ -7753,13 +7744,13 @@ static bool hclge_sync_from_add_list(struct list_head *add_list, * uc/mc_mac_list, it means have received a TO_DEL request * during the time window of adding the mac address into mac * table. if mac_node state is ACTIVE, then change it to TO_DEL, - * then it will be removed at next time. else it must be TO_ADD - * or ADD_FAIL, this address hasn't been added into mac table, + * then it will be removed at next time. else it must be TO_ADD, + * this address hasn't been added into mac table, * so just remove the mac node. */ new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr); if (new_node) { - hclge_mac_node_convert(new_node, mac_node->state); + hclge_update_mac_node(new_node, mac_node->state); list_del(&mac_node->node); kfree(mac_node); } else if (mac_node->state == HCLGE_MAC_ACTIVE) { @@ -7782,7 +7773,16 @@ static void hclge_sync_from_del_list(struct list_head *del_list, list_for_each_entry_safe(mac_node, tmp, del_list, node) { new_node = hclge_find_mac_node(mac_list, mac_node->mac_addr); if (new_node) { - hclge_mac_node_convert(new_node, mac_node->state); + /* If the mac addr exists in the mac list, it means + * received a new TO_ADD request during the time window + * of configuring the mac address. For the mac node + * state is TO_ADD, and the address is already in the + * in the hardware(due to delete fail), so we just need + * to change the mac node state to ACTIVE. + */ + new_node->state = HCLGE_MAC_ACTIVE; + list_del(&mac_node->node); + kfree(mac_node); } else { list_del(&mac_node->node); list_add_tail(&mac_node->node, mac_list); @@ -7850,7 +7850,6 @@ static void hclge_sync_vport_mac_table(struct hclge_vport *vport, list_for_each_entry_safe(mac_node, tmp, list, node) { switch (mac_node->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: list_del(&mac_node->node); list_add_tail(&mac_node->node, &tmp_del_list); break; @@ -7962,7 +7961,6 @@ void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list, list_for_each_entry_safe(mac_cfg, tmp, list, node) { switch (mac_cfg->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: case HCLGE_MAC_ACTIVE: list_del(&mac_cfg->node); list_add_tail(&mac_cfg->node, &tmp_del_list); @@ -8021,7 +8019,6 @@ static void hclge_uninit_mac_list(struct hclge_vport *vport, list_for_each_entry_safe(mac_node, tmp, list, node) { switch (mac_node->state) { case HCLGE_MAC_TO_DEL: - case HCLGE_MAC_DEL_FAIL: case HCLGE_MAC_ACTIVE: list_del(&mac_node->node); list_add_tail(&mac_node->node, &tmp_del_list); @@ -8221,7 +8218,7 @@ void hclge_replace_mac_node(struct list_head *list, const u8 *old_addr, } void hclge_modify_mac_node_state(struct list_head *list, const u8 *addr, - enum HCLGE_MAC_ADDR_STATE state) + enum HCLGE_MAC_NODE_STATE state) { struct hclge_vport_mac_addr_cfg *mac_node; @@ -8989,8 +8986,7 @@ static void hclge_mac_node_convert_for_reset(struct list_head *list) list_for_each_entry_safe(mac_node, tmp, list, node) { if (mac_node->state == HCLGE_MAC_ACTIVE) { mac_node->state = HCLGE_MAC_TO_ADD; - } else if (mac_node->state == HCLGE_MAC_TO_DEL || - mac_node->state == HCLGE_MAC_DEL_FAIL) { + } else if (mac_node->state == HCLGE_MAC_TO_DEL) { list_del(&mac_node->node); kfree(mac_node); } diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 5e462cf..a1fa782 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -640,16 +640,15 @@ struct hclge_fd_ad_data { u16 rule_id; }; -enum HCLGE_MAC_ADDR_STATE { +enum HCLGE_MAC_NODE_STATE { HCLGE_MAC_TO_ADD, HCLGE_MAC_TO_DEL, - HCLGE_MAC_DEL_FAIL, HCLGE_MAC_ACTIVE }; struct hclge_vport_mac_addr_cfg { struct list_head node; - enum HCLGE_MAC_ADDR_STATE state; + enum HCLGE_MAC_NODE_STATE state; u8 mac_addr[ETH_ALEN]; }; @@ -1016,13 +1015,13 @@ int hclge_set_vlan_filter(struct hnae3_handle *handle, __be16 proto, int hclge_notify_client(struct hclge_dev *hdev, enum hnae3_reset_notify_type type); int hclge_update_mac_list(struct hclge_vport *vport, - enum HCLGE_MAC_ADDR_STATE state, + enum HCLGE_MAC_NODE_STATE state, enum HCLGE_MAC_ADDR_TYPE mac_type, const unsigned char *addr); void hclge_replace_mac_node(struct list_head *list, const u8 *old_addr, const u8 *new_addr, bool keep_old); void hclge_modify_mac_node_state(struct list_head *list, const u8 *addr, - enum HCLGE_MAC_ADDR_STATE state); + enum HCLGE_MAC_NODE_STATE state); void hclge_rm_vport_all_mac_table(struct hclge_vport *vport, bool is_del_list, enum HCLGE_MAC_ADDR_TYPE mac_type); void hclge_rm_vport_all_vlan_table(struct hclge_vport *vport, bool is_del_list); -- 1.8.3

1 24

[PATCH] ACPI: GED: implement powerkey evged freeze function
by Hongbo Yao 24 Apr '20

24 Apr '20

From: Huang jun <huangjun61(a)huawei.com> If we want acpi ged to support wake from freeze, we need to implement the suspend/resume function. In these two methods, ACPI's _GPO, GPP method is called to realize the setting of sleep flag and anti-shake. Signed-off-by: Huangjun <huangjun63(a)huawei.com> --- drivers/acpi/evged.c | 108 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c index f13ba2c07667..dde8fbff8d19 100644 --- a/drivers/acpi/evged.c +++ b/drivers/acpi/evged.c @@ -46,11 +46,20 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/timer.h> +#include <linux/jiffies.h> #define MODULE_NAME "acpi-ged" +struct acpi_ged_handle { + struct timer_list timer;/* For 4s anti-shake of power button */ + acpi_handle gpp_handle; /* ACPI Handle: enable shutdown */ + acpi_handle gpo_handle; /* ACPI Handle: set sleep flag */ +}; + struct acpi_ged_device { struct device *dev; + struct acpi_ged_handle *wakeup_handle; struct list_head event_list; }; @@ -131,6 +140,34 @@ static acpi_status acpi_ged_request_interrupt(struct acpi_resource *ares, return AE_OK; } +#ifdef CONFIG_PM_SLEEP +static void init_ged_handle(struct acpi_ged_device *geddev) { + struct acpi_ged_handle *wakeup_handle; + acpi_handle gpo_handle = NULL; + acpi_handle gpp_handle = NULL; + acpi_status acpi_ret; + + wakeup_handle = devm_kzalloc(geddev->dev, sizeof(*wakeup_handle), GFP_KERNEL); + if (!wakeup_handle) + return; + + geddev->wakeup_handle = wakeup_handle; + + /* Initialize wakeup_handle, prepare for ged suspend and resume */ + timer_setup(&wakeup_handle->timer, NULL, 0); + + acpi_ret = acpi_get_handle(ACPI_HANDLE(geddev->dev), "_GPO", &gpo_handle); + if (ACPI_FAILURE(acpi_ret)) + dev_info(geddev->dev, "cannot locate _GPO method\n"); + wakeup_handle->gpo_handle = gpo_handle; + + acpi_ret = acpi_get_handle(ACPI_HANDLE(geddev->dev), "_GPP", &gpp_handle); + if (ACPI_FAILURE(acpi_ret)) + dev_info(geddev->dev, "cannot locate _GPP method\n"); + wakeup_handle->gpp_handle = gpp_handle; +} +#endif + static int ged_probe(struct platform_device *pdev) { struct acpi_ged_device *geddev; @@ -149,6 +186,9 @@ static int ged_probe(struct platform_device *pdev) return -EINVAL; } platform_set_drvdata(pdev, geddev); +#ifdef CONFIG_PM_SLEEP + init_ged_handle(geddev); +#endif return 0; } @@ -164,6 +204,10 @@ static void ged_shutdown(struct platform_device *pdev) dev_dbg(geddev->dev, "GED releasing GSI %u @ IRQ %u\n", event->gsi, event->irq); } + + if (geddev->wakeup_handle) + del_timer(&geddev->wakeup_handle->timer); + } static int ged_remove(struct platform_device *pdev) @@ -172,6 +216,67 @@ static int ged_remove(struct platform_device *pdev) return 0; } +#ifdef CONFIG_PM_SLEEP +static void ged_timer_callback(struct timer_list *t) +{ + struct acpi_ged_handle *wakeup_handle = from_timer(wakeup_handle, t, timer); + acpi_status acpi_ret; + + /* _GPP method enable power button */ + if (wakeup_handle && wakeup_handle->gpp_handle) { + acpi_ret = acpi_execute_simple_method(wakeup_handle->gpp_handle, NULL, ACPI_IRQ_MODEL_GIC); + if (ACPI_FAILURE(acpi_ret)) + pr_warn("_GPP method execution failed\n"); + } +} + +static int ged_suspend(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_handle *wakeup_handle = geddev->wakeup_handle; + struct acpi_ged_event *event, *next; + acpi_status acpi_ret; + + /* _GPO method set sleep flag */ + if (wakeup_handle && wakeup_handle->gpo_handle) { + acpi_ret = acpi_execute_simple_method(wakeup_handle->gpo_handle, NULL, ACPI_IRQ_MODEL_GIC); + if (ACPI_FAILURE(acpi_ret)) { + pr_warn("_GPO method execution failed\n"); + return AE_ERROR; + } + } + + list_for_each_entry_safe(event, next, &geddev->event_list, node) + enable_irq_wake(event->irq); + + return 0; +} + +static int ged_resume(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_handle *wakeup_handle = geddev->wakeup_handle; + struct acpi_ged_event *event, *next; + + /* use timer to complete 4s anti-shake */ + if (wakeup_handle && wakeup_handle->gpp_handle) { + wakeup_handle->timer.expires = jiffies + (4 * HZ); + wakeup_handle->timer.function = ged_timer_callback; + add_timer(&wakeup_handle->timer); + } + + list_for_each_entry_safe(event, next, &geddev->event_list, node) + disable_irq_wake(event->irq); + + return 0; +} + +static const struct dev_pm_ops ged_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ged_suspend, ged_resume) +}; +#endif + + static const struct acpi_device_id ged_acpi_ids[] = { {"ACPI0013"}, {}, @@ -184,6 +289,9 @@ static struct platform_driver ged_driver = { .driver = { .name = MODULE_NAME, .acpi_match_table = ACPI_PTR(ged_acpi_ids), +#ifdef CONFIG_PM_SLEEP + .pm = &ged_pm_ops, +#endif }, }; builtin_platform_driver(ged_driver); -- 2.20.1

1 1

[PATCH 00/41] Backport lts patches from Linux-4.19.117
by Yang Yingliang 24 Apr '20

24 Apr '20

Alexei Avshalom Lazar (1): wil6210: add general initialization/size checks Amir Goldstein (1): ovl: fix value of i_ino for lower hardlink corner case Austin Kim (1): mm/vmalloc.c: move 'area->pages' after if statement Can Guo (1): scsi: ufs: Fix ufshcd_hold() caused scheduling while atomic Colin Ian King (2): ASoC: Intel: mrfld: fix incorrect check on p->sink ASoC: Intel: mrfld: return error codes when an error occurs DENG Qingfang (1): net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode Dedy Lansky (2): wil6210: check rx_buff_mgmt before accessing it wil6210: make sure Rx ring sizes are correlated Florian Fainelli (1): net: stmmac: dwmac-sunxi: Provide TX and RX fifo sizes Greg Kroah-Hartman (1): Linux 4.19.117 James Morse (1): x86/resctrl: Preserve CDP enable over CPU hotplug Jan Kara (1): ext4: do not zeroout extents beyond i_disksize Jim Mattson (1): kvm: x86: Host feature SSBD doesn't imply guest feature SPEC_CTRL_SSBD John Allen (1): x86/microcode/AMD: Increase microcode PATCH_MAX_SIZE Josef Bacik (1): btrfs: check commit root generation in should_ignore_root Josh Triplett (2): ext4: fix incorrect group count in ext4_fill_super error message ext4: fix incorrect inodes per group in error message Karthick Gopalasubramanian (1): wil6210: remove reset file from debugfs Konstantin Khlebnikov (1): net: revert default NAPI poll timeout to 2 jiffies Maurizio Lombardi (2): scsi: target: remove boilerplate code scsi: target: fix hang when multiple threads try to destroy the same iscsi session Maya Erez (1): wil6210: ignore HALP ICR if already handled Reinette Chatre (1): x86/resctrl: Fix invalid attempt at removing the default resource group Sasha Levin (1): usb: dwc3: gadget: don't enable interrupt when disabling endpoint Sebastian Andrzej Siewior (1): amd-xgbe: Use __napi_schedule() in BH context Sergei Lopatin (1): drm/amd/powerplay: force the trim of the mclk dpm_levels if OD is enabled Sven Van Asbroeck (1): pwm: pca9685: Fix PWM/GPIO inter-operation Taehee Yoo (1): hsr: check protocol version in hsr_newlink() Takashi Iwai (4): ALSA: usb-audio: Filter error from connector kctl ops, too ALSA: usb-audio: Don't override ignore_ctl_error value from the map ALSA: usb-audio: Don't create jack controls for PCM terminals ALSA: usb-audio: Check mapping at creating connector controls, too Taras Chornyi (1): net: ipv4: devinet: Fix crash when add/del multicast IP with autojoin Thinh Nguyen (1): usb: dwc3: gadget: Don't clear flags before transfer ended Tim Stallard (1): net: ipv6: do not consider routes via gateways for anycast address check Tuomas Tynkkynen (1): mac80211_hwsim: Use kstrndup() in place of kasprintf() Vasily Averin (1): keys: Fix proc_keys_next to increase position index Wang Wenhu (1): net: qrtr: send msgs from local of same id as broadcast Xiao Yang (1): tracing: Fix the race between registering 'snapshot' event trigger and triggering 'snapshot' operation zhangyi (F) (1): jbd2: improve comments about freeing data buffers whose page mapping is NULL Makefile | 2 +- arch/x86/include/asm/microcode_amd.h | 2 +- arch/x86/kernel/cpu/intel_rdt.c | 2 + arch/x86/kernel/cpu/intel_rdt.h | 1 + arch/x86/kernel/cpu/intel_rdt_rdtgroup.c | 16 ++++- arch/x86/kvm/cpuid.c | 3 +- drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c | 5 +- drivers/net/dsa/mt7530.c | 18 +++-- drivers/net/dsa/mt7530.h | 7 ++ drivers/net/ethernet/amd/xgbe/xgbe-drv.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 + drivers/net/wireless/ath/wil6210/debugfs.c | 29 +------- drivers/net/wireless/ath/wil6210/interrupt.c | 12 ++-- drivers/net/wireless/ath/wil6210/main.c | 5 +- drivers/net/wireless/ath/wil6210/txrx.c | 4 +- drivers/net/wireless/ath/wil6210/txrx_edma.c | 14 +++- drivers/net/wireless/ath/wil6210/wil6210.h | 3 +- drivers/net/wireless/ath/wil6210/wmi.c | 2 +- drivers/net/wireless/mac80211_hwsim.c | 12 ++-- drivers/pwm/pwm-pca9685.c | 85 +++++++++++++---------- drivers/scsi/ufs/ufshcd.c | 5 ++ drivers/target/iscsi/iscsi_target.c | 79 ++++++--------------- drivers/target/iscsi/iscsi_target.h | 1 - drivers/target/iscsi/iscsi_target_configfs.c | 5 +- drivers/target/iscsi/iscsi_target_login.c | 5 +- drivers/usb/dwc3/gadget.c | 18 ++--- fs/btrfs/relocation.c | 4 +- fs/ext4/extents.c | 8 +-- fs/ext4/super.c | 6 +- fs/jbd2/commit.c | 7 +- fs/overlayfs/inode.c | 4 +- include/net/ip6_route.h | 1 + include/target/iscsi/iscsi_target_core.h | 2 +- kernel/trace/trace_events_trigger.c | 10 +-- mm/vmalloc.c | 8 ++- net/core/dev.c | 3 +- net/hsr/hsr_netlink.c | 10 ++- net/ipv4/devinet.c | 13 ++-- net/qrtr/qrtr.c | 7 +- security/keys/proc.c | 2 + sound/soc/intel/atom/sst-atom-controls.c | 2 +- sound/soc/intel/atom/sst/sst_pci.c | 2 +- sound/usb/mixer.c | 31 +++++---- sound/usb/mixer_maps.c | 4 +- 44 files changed, 251 insertions(+), 212 deletions(-) -- 1.8.3

1 41

[PATCH] btrfs: tree-checker: Enhance chunk checker to validate chunk profile
by Yang Yingliang 22 Apr '20

22 Apr '20

From: Qu Wenruo <wqu(a)suse.com> mainline inclusion from mainline-v5.2-rc1 commit 80e46cf22ba0bcb57b39c7c3b52961ab3a0fd5f2 category: bugfix bugzilla: 13690 CVE: CVE-2019-19378 ------------------------------------------------- Btrfs-progs already have a comprehensive type checker, to ensure there is only 0 (SINGLE profile) or 1 (DUP/RAID0/1/5/6/10) bit set for chunk profile bits. Do the same work for kernel. Reported-by: Yoon Jungyeon <jungyeon(a)gatech.edu> Link: https://bugzilla.kernel.org/show_bug.cgi?id=202765 Reviewed-by: Nikolay Borisov <nborisov(a)suse.com> Reviewed-by: Johannes Thumshirn <jthumshirn(a)suse.de> Signed-off-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Conflicts: fs/btrfs/volumes.c [yyl: btrfs_check_chunk_valid() is defined in fs/btrfs/volumes.c] Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/volumes.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 99260d2..110cdfd 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -6391,6 +6391,14 @@ static int btrfs_check_chunk_valid(struct btrfs_fs_info *fs_info, return -EIO; } + if (!is_power_of_2(type & BTRFS_BLOCK_GROUP_PROFILE_MASK) && + (type & BTRFS_BLOCK_GROUP_PROFILE_MASK) != 0) { + btrfs_err(fs_info, + "invalid chunk profile flag: 0x%llx, expect 0 or 1 bit set", + type & BTRFS_BLOCK_GROUP_PROFILE_MASK); + return -EIO; + } + if ((type & BTRFS_BLOCK_GROUP_TYPE_MASK) == 0) { btrfs_err(fs_info, "missing chunk type flag: 0x%llx", type); return -EIO; -- 1.8.3

1 0

[PATCH] livepatch/core: fix kabi for klp_rel_state
by Yang Yingliang 22 Apr '20

22 Apr '20

From: Cheng Jian <cj.chengjian(a)huawei.com> hulk inclusion category: feature bugzilla: 5391/28338/24634 CVE: NA ----------------------------------------------- The previous patch added a field klp_rel_state in the module structure, which caused KABI changes, so fix this problem Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/module.h | 33 ++++++++++++++++++++------------- 1 file changed, 20 insertions(+), 13 deletions(-) diff --git a/include/linux/module.h b/include/linux/module.h index 4994243..e1f3418 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -469,19 +469,6 @@ struct module { /* Elf information */ struct klp_modinfo *klp_info; - /* - * livepatch should relocate the key of jump_label by - * using klp_write_module_reloc. So it's necessary to - * do jump_label_apply_nops() and jump_label_add_module() - * later after livepatch relocation finised. - * - * for normal module : - * always MODULE_KLP_REL_DONE. - * for livepatch module : - * init as MODULE_KLP_REL_UNDO, - * set to MODULE_KLP_REL_DONE when relocate completed. - */ - enum MODULE_KLP_REL_STATE klp_rel_state; #endif #ifdef CONFIG_MODULE_UNLOAD @@ -507,7 +494,27 @@ struct module { unsigned int num_ei_funcs; #endif +#if defined(CONFIG_LIVEPATCH) && !defined(__GENKSYMS__) + union { + /* + * livepatch should relocate the key of jump_label by + * using klp_write_module_reloc. So it's necessary to + * do jump_label_apply_nops() and jump_label_add_module() + * later after livepatch relocation finised. + * + * for normal module : + * always MODULE_KLP_REL_DONE. + * for livepatch module : + * init as MODULE_KLP_REL_UNDO, + * set to MODULE_KLP_REL_DONE when relocate completed. + */ + enum MODULE_KLP_REL_STATE klp_rel_state; + long klp_rel_state_KABI; + }; +#else KABI_RESERVE(1) +#endif + KABI_RESERVE(2) KABI_RESERVE(3) KABI_RESERVE(4) -- 1.8.3

1 0

[PATCH v1] scsi: hisi_sas: do not reset the timer to wait for phyup when phy already up
by Luo Jiaxing 22 Apr '20

22 Apr '20

We found out that after phy up, the hardware report another oob interrupt, but did not follow a phy up interrupt. like: oob ready -> phy up -> DEV found -> oob read -> wait phy up -> timeout We run link reset when wait phy up timeout, and it make a normal disk into reset processing. So we made some circumvention action in the code, so that this abnormal oob interrupt will not start the timer to wait for phy up. Signed-off-by: Luo Jiaxing <luojiaxing(a)huawei.com> Signed-off-by: John Garry <john.garry(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index acf2fc6..5b80856 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1898,8 +1898,11 @@ static void handle_chl_int0_v3_hw(struct hisi_hba *hisi_hba, int phy_no) if (irq_value0 & CHL_INT0_PHY_RDY_MSK) { struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no]; + dev_dbg(dev, "phy%d OOB ready\n", phy_no); + if (phy->phy_attached) + return; + if (!timer_pending(&phy->timer)) { - dev_dbg(dev, "phy%d OOB ready\n", phy_no); phy->timer.function = wait_phyup_timedout_v3_hw; phy->timer.expires = jiffies + WAIT_PHYUP_TIMEOUT_V3_HW * HZ; -- 2.7.4

1 0

How to get the patches openEuler 20.03 LTS Kernel has
by Fred Li 22 Apr '20

22 Apr '20

Hi all, We are frequently asked what patches kernel has comparing with Kernel 4.19. [1] shows how to find them and hope it helps. If more information is needed, please leave messages in the issue [1]. [1] https://gitee.com/openeuler/kernel/issues/I1F430 -- Regards Fred Li (李永乐)

1 0

[PATCH] net: hns3: add suspend/resume function for hns3 driver
by Jian Shen 21 Apr '20

21 Apr '20

From: Hao Shen <shenhao21(a)huawei.com> The suspend and resume feature is useful when you want to save the current state of your machine, and continue work later from the same state. This patch makes the hns3 net device work form the same state after s3 and s4. Signed-off-by: Weiwei Deng <dengweiwei(a)huawei.com> Signed-off-by: Hao Shen <shenhao21(a)huawei.com> Signed-off-by: Jian Shen <shenjian15(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 32 ++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 70 ++++++++++++++++++++++ 3 files changed, 104 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index bb29b46..8b1e690 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -561,6 +561,8 @@ struct hnae3_ae_ops { int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p); int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset, u32 len, u8 *data); + int (*suspend)(struct hnae3_ae_dev *ae_dev); + int (*resume)(struct hnae3_ae_dev *ae_dev); }; struct hnae3_dcb_ops { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 4eca8cf..de3d37c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2226,6 +2226,34 @@ static void hns3_shutdown(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D3hot); } +#ifdef CONFIG_PM +static int hns3_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + if (ae_dev->ops->suspend) + ae_dev->ops->suspend(ae_dev); + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int hns3_resume(struct pci_dev *pdev) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (ae_dev->ops->resume) + return ae_dev->ops->resume(ae_dev); + + return 0; +} +#endif + static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2310,6 +2338,10 @@ struct pci_driver hns3_driver = { .probe = hns3_probe, .remove = hns3_remove, .shutdown = hns3_shutdown, +#ifdef CONFIG_PM + .suspend = hns3_suspend, + .resume = hns3_resume, +#endif .sriov_configure = hns3_pci_sriov_configure, .err_handler = &hns3_err_handler, }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c2ae05f..478a3b5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3820,6 +3820,72 @@ static void hclge_reset(struct hclge_dev *hdev) hclge_reset_task_schedule(hdev); } +#ifdef CONFIG_PM +static int hclge_suspend(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + ret = hclge_notify_roce_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + return ret; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UNINIT_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} + +static int hclge_resume(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + rtnl_lock(); + + ret = hclge_reset_ae_dev(hdev->ae_dev); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + ret = hclge_notify_roce_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_UP_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UP_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} +#endif + static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) { struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); @@ -11525,6 +11591,10 @@ struct hnae3_ae_ops hclge_ops = { .set_vf_rate = hclge_set_vf_rate, .set_vf_mac = hclge_set_vf_mac, .get_module_eeprom = hclge_get_module_eeprom, +#ifdef CONFIG_PM + .suspend = hclge_suspend, + .resume = hclge_resume, +#endif }; static struct hnae3_ae_algo ae_algo = { -- 1.9.1

1 0

[PATCH] net: hns3: add suspend/resume function for hns3 driver
by Jian Shen 21 Apr '20

21 Apr '20

From: Hao Shen <shenhao21(a)huawei.com> The suspend and resume feature is useful when you want to save the current state of your machine, and continue work later from the same state. This patch makes the hns3 net device work form the same state after s3 and s4. Signed-off-by: Weiwei Deng <dengweiwei(a)huawei.com> Signed-off-by: Hao Shen <shenhao21(a)huawei.com> Signed-off-by: Jian Shen <shenjian15(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 32 ++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 70 ++++++++++++++++++++++ 3 files changed, 104 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index bb29b46..8b1e690 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -561,6 +561,8 @@ struct hnae3_ae_ops { int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p); int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset, u32 len, u8 *data); + int (*suspend)(struct hnae3_ae_dev *ae_dev); + int (*resume)(struct hnae3_ae_dev *ae_dev); }; struct hnae3_dcb_ops { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 4eca8cf..de3d37c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2226,6 +2226,34 @@ static void hns3_shutdown(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D3hot); } +#ifdef CONFIG_PM +static int hns3_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + if (ae_dev->ops->suspend) + ae_dev->ops->suspend(ae_dev); + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int hns3_resume(struct pci_dev *pdev) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (ae_dev->ops->resume) + return ae_dev->ops->resume(ae_dev); + + return 0; +} +#endif + static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2310,6 +2338,10 @@ struct pci_driver hns3_driver = { .probe = hns3_probe, .remove = hns3_remove, .shutdown = hns3_shutdown, +#ifdef CONFIG_PM + .suspend = hns3_suspend, + .resume = hns3_resume, +#endif .sriov_configure = hns3_pci_sriov_configure, .err_handler = &hns3_err_handler, }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c2ae05f..478a3b5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3820,6 +3820,72 @@ static void hclge_reset(struct hclge_dev *hdev) hclge_reset_task_schedule(hdev); } +#ifdef CONFIG_PM +static int hclge_suspend(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + ret = hclge_notify_roce_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + return ret; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UNINIT_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} + +static int hclge_resume(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + rtnl_lock(); + + ret = hclge_reset_ae_dev(hdev->ae_dev); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + ret = hclge_notify_roce_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_UP_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UP_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} +#endif + static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) { struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); @@ -11525,6 +11591,10 @@ struct hnae3_ae_ops hclge_ops = { .set_vf_rate = hclge_set_vf_rate, .set_vf_mac = hclge_set_vf_mac, .get_module_eeprom = hclge_get_module_eeprom, +#ifdef CONFIG_PM + .suspend = hclge_suspend, + .resume = hclge_resume, +#endif }; static struct hnae3_ae_algo ae_algo = { -- 1.9.1

1 0

[PATCH hulk-4.19-next] net: hns3: add suspend/resume function for hns3 driver
by Jian Shen 21 Apr '20

21 Apr '20

From: Hao Shen <shenhao21(a)huawei.com> The suspend and resume feature is useful when you want to save the current state of your machine, and continue work later from the same state. This patch makes the hns3 net device work form the same state after s3 and s4. Signed-off-by: Weiwei Deng <dengweiwei(a)huawei.com> Signed-off-by: Hao Shen <shenhao21(a)huawei.com> Signed-off-by: Jian Shen <shenjian15(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 32 ++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 70 ++++++++++++++++++++++ 3 files changed, 104 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index bb29b46..8b1e690 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -561,6 +561,8 @@ struct hnae3_ae_ops { int (*set_vf_mac)(struct hnae3_handle *handle, int vf, u8 *p); int (*get_module_eeprom)(struct hnae3_handle *handle, u32 offset, u32 len, u8 *data); + int (*suspend)(struct hnae3_ae_dev *ae_dev); + int (*resume)(struct hnae3_ae_dev *ae_dev); }; struct hnae3_dcb_ops { diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c index 4eca8cf..de3d37c3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.c @@ -2226,6 +2226,34 @@ static void hns3_shutdown(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D3hot); } +#ifdef CONFIG_PM +static int hns3_suspend(struct pci_dev *pdev, pm_message_t state) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + if (ae_dev->ops->suspend) + ae_dev->ops->suspend(ae_dev); + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; +} + +static int hns3_resume(struct pci_dev *pdev) +{ + struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + + if (ae_dev->ops->resume) + return ae_dev->ops->resume(ae_dev); + + return 0; +} +#endif + static pci_ers_result_t hns3_error_detected(struct pci_dev *pdev, pci_channel_state_t state) { @@ -2310,6 +2338,10 @@ struct pci_driver hns3_driver = { .probe = hns3_probe, .remove = hns3_remove, .shutdown = hns3_shutdown, +#ifdef CONFIG_PM + .suspend = hns3_suspend, + .resume = hns3_resume, +#endif .sriov_configure = hns3_pci_sriov_configure, .err_handler = &hns3_err_handler, }; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index c2ae05f..478a3b5 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -3820,6 +3820,72 @@ static void hclge_reset(struct hclge_dev *hdev) hclge_reset_task_schedule(hdev); } +#ifdef CONFIG_PM +static int hclge_suspend(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + ret = hclge_notify_roce_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + return ret; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_DOWN_CLIENT); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UNINIT_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} + +static int hclge_resume(struct hnae3_ae_dev *ae_dev) +{ + struct hclge_dev *hdev = ae_dev->priv; + int ret; + + rtnl_lock(); + + ret = hclge_reset_ae_dev(hdev->ae_dev); + if (ret) + goto err_reset_lock; + + ret = hclge_notify_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + ret = hclge_notify_roce_client(hdev, HNAE3_INIT_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_lock(); + + ret = hclge_notify_client(hdev, HNAE3_UP_CLIENT); + if (ret) + goto err_reset_lock; + + rtnl_unlock(); + + return hclge_notify_roce_client(hdev, HNAE3_UP_CLIENT); + +err_reset_lock: + rtnl_unlock(); + return ret; +} +#endif + static void hclge_reset_event(struct pci_dev *pdev, struct hnae3_handle *handle) { struct hnae3_ae_dev *ae_dev = pci_get_drvdata(pdev); @@ -11525,6 +11591,10 @@ struct hnae3_ae_ops hclge_ops = { .set_vf_rate = hclge_set_vf_rate, .set_vf_mac = hclge_set_vf_mac, .get_module_eeprom = hclge_get_module_eeprom, +#ifdef CONFIG_PM + .suspend = hclge_suspend, + .resume = hclge_resume, +#endif }; static struct hnae3_ae_algo ae_algo = { -- 1.9.1

1 0

[PATCH 000/144] Backport lts patches from Linux-4.19.116
by Yang Yingliang 21 Apr '20

21 Apr '20

Alain Volmat (1): i2c: st: fix missing struct parameter description Alex Vesker (1): IB/mlx5: Replace tunnel mpls capability bits for tunnel_offloads Alexander Duyck (1): mm: Use fixed constant in page_frag_alloc instead of size + 1 Alexander Sverdlin (1): genirq/irqdomain: Check pointer in irq_domain_alloc_irqs_hierarchy() Alexey Dobriyan (1): null_blk: fix spurious IO errors after failed past-wp access Andrei Botila (1): crypto: caam - update xts sector size for large input length Andy Lutomirski (1): selftests/x86/ptrace_syscall_32: Fix no-vDSO segfault Andy Shevchenko (1): mfd: dln2: Fix sanity checking for endpoints Aneesh Kumar K.V (1): powerpc/hash64/devmap: Use H_PAGE_THP_HUGE when setting up huge devmap PTE entries Anssi Hannula (1): tools: gpio: Fix out-of-tree build regression Ard Biesheuvel (1): efi/x86: Ignore the memory attributes table on i386 Arvind Sankar (1): x86/boot: Use unsigned comparison for addresses Bart Van Assche (2): null_blk: Fix the null_add_dev() error path null_blk: Handle null_add_dev() failures properly Benoit Parrot (1): media: ti-vpe: cal: fix disable_irqs to only the intended target Bob Liu (1): dm zoned: remove duplicate nr_rnd_zones increase in dmz_init_zone() Bob Peterson (1): gfs2: Don't demote a glock until its revokes are written Boqun Feng (1): locking/lockdep: Avoid recursion in lockdep_count_{for,back}ward_deps() Changwei Ge (1): ocfs2: no need try to truncate file beyond i_size Chris Wilson (1): drm: Remove PageReserved manipulation from drm_pci_alloc Christian Gmeiner (2): drm/etnaviv: rework perfmon query infrastructure etnaviv: perfmon: fix total and idle HI cyleces readout Christoph Niedermaier (1): cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL Christophe Leroy (1): powerpc/kprobes: Ignore traps that happened in real mode Clement Courbet (1): powerpc: Make setjmp/longjmp signature standard Cédric Le Goater (1): powerpc/xive: Use XIVE_BAD_IRQ instead of zero to catch non configured IPIs David Hildenbrand (2): KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks KVM: s390: vsie: Fix delivery of addressing exceptions Dongchun Zhu (1): media: i2c: ov5695: Fix power on and off sequences Eric Biggers (2): fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled Eric W. Biederman (1): signal: Extend exec_id to 64bits Filipe Manana (2): Btrfs: fix crash during unmount due to race with delayed inode workers btrfs: fix missing file extent item for hole after ranged fsync Fredrik Strupe (1): arm64: armv8_deprecated: Fix undef_hook mask for thumb setend Frieder Schrempf (2): mtd: spinand: Stop using spinand->oobbuf for buffering bad block markers mtd: spinand: Do not erase the block before writing a bad block marker Gao Xiang (1): erofs: correct the remaining shrink objects Gary Lin (1): efi/x86: Fix the deletion of variables in mixed mode Gilad Ben-Yossef (4): crypto: ccree - zero out internal struct before use crypto: ccree - don't mangle the request assoclen crypto: ccree - dec auth tag size from cryptlen map crypto: ccree - only try to map auth tag if needed Greg Kroah-Hartman (1): Linux 4.19.116 Guoqing Jiang (1): md: check arrays is suspended in mddev_detach before call quiesce operations Gustavo A. R. Silva (1): MIPS: OCTEON: irq: Fix potential NULL pointer dereference Hadar Gat (1): crypto: ccree - improve error handling Hans de Goede (1): Input: i8042 - add Acer Aspire 5738z to nomux list Huacai Chen (1): MIPS/tlbex: Fix LDDIR usage in setup_pw() for Loongson-3 James Morse (1): firmware: arm_sdei: fix double-lock on hibernate with shared events James Smart (2): nvme-fc: Revert "add module to ops template to allow module references" nvme: Treat discovery subsystems as unique subsystems Jan Engelhardt (1): acpi/x86: ignore unspecified bit positions in the ACPI global lock field John Garry (1): libata: Remove extra scsi_host_put() in ata_scsi_add_hosts() Josef Bacik (5): btrfs: remove a BUG_ON() from merge_reloc_roots() btrfs: track reloc roots based on their commit root bytenr btrfs: set update the uuid generation as soon as possible btrfs: drop block from cache on error in relocation btrfs: use nofs allocations for running delayed items Juergen Gross (1): xen/blkfront: fix memory allocation flags in blkfront_setup_indirect() Junyong Sun (1): firmware: fix a double abort case with fw_load_sysfs_fallback Kai-Heng Feng (1): libata: Return correct status in sata_pmp_eh_recover_pm() when ATA_DFLAG_DETACH is set Kees Cook (1): slub: improve bit diffusion for freelist ptr obfuscation Kishon Vijay Abraham I (1): PCI: endpoint: Fix for concurrent memory allocation in OB address region Konstantin Khlebnikov (1): block: keep bdi->io_pages in sync with max_sectors_kb for stacked devices Laurentiu Tudor (1): powerpc/fsl_booke: Avoid creating duplicate tlb1 entry Libor Pechacek (1): powerpc/pseries: Avoid NULL pointer dereference when drmem is unavailable Logan Gunthorpe (1): PCI/switchtec: Fix init_completion race condition with poll_wait() Lukas Wunner (1): PCI: pciehp: Fix indefinite wait on sysfs requests Lyude Paul (1): drm/dp_mst: Fix clearing payload state on topology disable Marc Zyngier (1): irqchip/gic-v4: Provide irq_retrigger to avoid circular locking dependency Martin Blumenstingl (1): thermal: devfreq_cooling: inline all stubs for CONFIG_DEVFREQ_THERMAL=n Masami Hiramatsu (1): ftrace/kprobe: Show the maxactive number on kprobe_events Mathias Nyman (1): xhci: bail out early if driver can't accress host in resume Matt Ranostay (1): media: i2c: video-i2c: fix build errors due to 'imply hwmon' Matthew Garrett (1): tpm: Don't make log failures fatal Maxime Ripard (1): arm64: dts: allwinner: h6: Fix PMU compatible Michael Ellerman (1): powerpc/64/tm: Don't let userspace set regs->trap via sigreturn Michael Mueller (1): s390/diag: fix display of diagnose call statistics Michael Wang (1): sched: Avoid scale real weight down to zero Michal Hocko (1): selftests: vm: drop dependencies on page flags from mlock2 tests Mikulas Patocka (1): dm writecache: add cond_resched to avoid CPU hangs Nathan Chancellor (2): rtc: omap: Use define directive for PIN_CONFIG_ACTIVE_HIGH misc: echo: Remove unnecessary parentheses and simplify check for zero Neil Armstrong (1): usb: dwc3: core: add support for disabling SS instances in park mode Oliver O'Halloran (1): cpufreq: powernv: Fix use-after-free Ondrej Jirman (2): ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage bus: sunxi-rsb: Return correct data when mixing 16-bit and 8-bit reads Paul Cercueil (1): clk: ingenic/jz4770: Exit with error if CGU init failed Qian Cai (1): ext4: fix a data race at inode->i_blocks Qu Wenruo (1): btrfs: qgroup: ensure qgroup_rescan_running is only set when the worker is at least queued Raju Rangoju (1): cxgb4/ptp: pass the sign of offset delta in FW CMD Remi Pommarel (1): ath9k: Handle txpower changes even when TPC is disabled Robbie Ko (1): btrfs: fix missing semaphore unlock in btrfs_sync_file Rosioru Dragos (1): crypto: mxs-dcp - fix scatterlist linearization for hash Sahitya Tummala (1): block: Fix use-after-free issue accessing struct io_cq Sam Lunt (1): perf tools: Support Python 3.8+ in Makefile Sasha Levin (1): Revert "drm/dp_mst: Remove VCPI while disabling topology mgr" Sean Christopherson (4): KVM: nVMX: Properly handle userspace interrupt window request KVM: x86: Allocate new rmap and large page tracking when moving memslot KVM: VMX: Always VMCLEAR in-use VMCSes during crash with kexec support KVM: x86: Gracefully handle __vmalloc() failure during VM allocation Sean V Kelley (1): PCI: Add boot interrupt quirk mechanism for Xeon chipsets Segher Boessenkool (1): powerpc: Add attributes for setjmp/longjmp Shetty, Harshini X (EXT-Sony Mobile) (1): dm verity fec: fix memory leak in verity_fec_dtr Simon Gander (1): hfsplus: fix crash and filesystem corruption when deleting files Sreekanth Reddy (1): scsi: mpt3sas: Fix kernel panic observed on soft HBA unplug Sriharsha Allenki (1): usb: gadget: f_fs: Fix use after free issue as part of queue failure Steffen Maier (1): scsi: zfcp: fix missing erp_lock in port recovery trigger for point-to-point Stephan Gerhold (1): media: venus: hfi_parser: Ignore HEVC encoding for V1 Subash Abhinov Kasiviswanathan (1): net: qualcomm: rmnet: Allow configuration updates to existing devices Sungbo Eo (2): irqchip/versatile-fpga: Handle chained IRQs properly irqchip/versatile-fpga: Apply clear-mask earlier Takashi Iwai (6): ALSA: usb-audio: Add mixer workaround for TRX40 and co ALSA: hda: Add driver blacklist ALSA: hda: Fix potential access overflow in beep helper ALSA: ice1724: Fix invalid access for enumerated ctl items ALSA: pcm: oss: Fix regression by buffer overflow fix ALSA: hda/realtek - Add quirk for MSI GL63 Thinh Nguyen (1): usb: gadget: composite: Inform controller driver of self-powered Thomas Gleixner (1): x86/entry/32: Add missing ASM_CLAC to general_protection entry Thomas Hebb (3): ALSA: doc: Document PC Beep Hidden Register on Realtek ALC256 ALSA: hda/realtek - Set principled PC Beep configuration for ALC256 ALSA: hda/realtek - Remove now-unnecessary XPS 13 headphone noise fixups Thomas Hellstrom (1): x86: Don't let pgprot_modify() change the page encryption bit Trond Myklebust (1): NFS: Fix a page leak in nfs_destroy_unlinked_subrequests() Vasily Averin (3): tpm: tpm1_bios_measurements_next should increase position index tpm: tpm2_bios_measurements_next should increase position index pstore: pstore_ftrace_seq_next should increase position index Vitaly Kuznetsov (1): KVM: VMX: fix crash cleanup when KVM wasn't used Wen Yang (1): ipmi: fix hung processes in __get_guid() Xu Wang (1): qlcnic: Fix bad kzalloc null test Yang Xu (1): KEYS: reaching the keys quotas correctly Yicong Yang (1): PCI/ASPM: Clear the correct bits when enabling L1 substates YueHaibing (1): powerpc/pseries: Drop pointless static qualifier in vpa_debugfs_init() Yury Norov (1): uapi: rename ext2_swab() to swab() and share globally in swab.h Zheng Wei (1): net: vxge: fix wrong __VA_ARGS__ usage Zhenzhong Duan (1): x86/speculation: Remove redundant arch_smt_update() invocation Zhiqiang Liu (1): block, bfq: fix use-after-free in bfq_idle_slice_timer_body chenqiwu (1): pstore/platform: fix potential mem leak if pstore_init_fs failed 이경택 (4): ASoC: fix regwmask ASoC: dapm: connect virtual mux with default value ASoC: dpcm: allow start or stop during pause for backend ASoC: topology: use name_prefix for new kcontrol Documentation/sound/hd-audio/index.rst | 1 + Documentation/sound/hd-audio/models.rst | 2 - Documentation/sound/hd-audio/realtek-pc-beep.rst | 129 ++++++++++++ Makefile | 2 +- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 +- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 3 +- arch/arm64/kernel/armv8_deprecated.c | 2 +- arch/mips/cavium-octeon/octeon-irq.c | 3 + arch/mips/mm/tlbex.c | 5 +- arch/powerpc/include/asm/book3s/64/hash-4k.h | 6 + arch/powerpc/include/asm/book3s/64/hash-64k.h | 8 +- arch/powerpc/include/asm/book3s/64/pgtable.h | 4 +- arch/powerpc/include/asm/book3s/64/radix.h | 5 + arch/powerpc/include/asm/drmem.h | 4 +- arch/powerpc/include/asm/setjmp.h | 6 +- arch/powerpc/kernel/Makefile | 3 - arch/powerpc/kernel/kprobes.c | 3 + arch/powerpc/kernel/signal_64.c | 4 +- arch/powerpc/mm/tlb_nohash_low.S | 12 +- arch/powerpc/platforms/pseries/hotplug-memory.c | 8 +- arch/powerpc/platforms/pseries/lpar.c | 2 +- arch/powerpc/sysdev/xive/common.c | 12 +- arch/powerpc/sysdev/xive/native.c | 4 +- arch/powerpc/sysdev/xive/spapr.c | 4 +- arch/powerpc/sysdev/xive/xive-internal.h | 7 + arch/powerpc/xmon/Makefile | 3 - arch/s390/kernel/diag.c | 2 +- arch/s390/kvm/vsie.c | 1 + arch/s390/mm/gmap.c | 6 +- arch/x86/boot/compressed/head_32.S | 2 +- arch/x86/boot/compressed/head_64.S | 4 +- arch/x86/entry/entry_32.S | 1 + arch/x86/include/asm/kvm_host.h | 2 +- arch/x86/include/asm/pgtable.h | 7 +- arch/x86/include/asm/pgtable_types.h | 2 +- arch/x86/kernel/acpi/boot.c | 2 +- arch/x86/kvm/svm.c | 4 + arch/x86/kvm/vmx.c | 110 ++++------ arch/x86/kvm/x86.c | 21 +- arch/x86/platform/efi/efi_64.c | 4 +- block/bfq-iosched.c | 16 +- block/blk-ioc.c | 7 + block/blk-settings.c | 3 + drivers/ata/libata-pmp.c | 1 + drivers/ata/libata-scsi.c | 9 +- drivers/base/firmware_loader/fallback.c | 2 +- drivers/block/null_blk_main.c | 10 +- drivers/block/xen-blkfront.c | 17 +- drivers/bus/sunxi-rsb.c | 2 +- drivers/char/ipmi/ipmi_msghandler.c | 4 +- drivers/char/tpm/eventlog/common.c | 12 +- drivers/char/tpm/eventlog/tpm1.c | 2 +- drivers/char/tpm/eventlog/tpm2.c | 2 +- drivers/char/tpm/tpm-chip.c | 4 +- drivers/char/tpm/tpm.h | 2 +- drivers/clk/ingenic/jz4770-cgu.c | 4 +- drivers/cpufreq/imx6q-cpufreq.c | 3 + drivers/cpufreq/powernv-cpufreq.c | 6 + drivers/crypto/caam/caamalg_desc.c | 16 +- drivers/crypto/ccree/cc_aead.c | 56 +++-- drivers/crypto/ccree/cc_aead.h | 1 + drivers/crypto/ccree/cc_buffer_mgr.c | 108 +++++----- drivers/crypto/mxs-dcp.c | 58 +++-- drivers/firmware/arm_sdei.c | 32 ++- drivers/firmware/efi/efi.c | 2 +- drivers/gpu/drm/drm_dp_mst_topology.c | 19 +- drivers/gpu/drm/drm_pci.c | 25 +-- drivers/gpu/drm/etnaviv/etnaviv_perfmon.c | 103 +++++++-- drivers/i2c/busses/i2c-st.c | 1 + drivers/infiniband/hw/mlx5/main.c | 6 +- drivers/input/serio/i8042-x86ia64io.h | 11 + drivers/irqchip/irq-gic-v3-its.c | 6 + drivers/irqchip/irq-versatile-fpga.c | 18 +- drivers/md/dm-verity-fec.c | 1 + drivers/md/dm-writecache.c | 6 +- drivers/md/dm-zoned-metadata.c | 1 - drivers/md/md.c | 2 +- drivers/media/i2c/ov5695.c | 49 +++-- drivers/media/i2c/video-i2c.c | 2 +- drivers/media/platform/qcom/venus/hfi_parser.c | 1 + drivers/media/platform/ti-vpe/cal.c | 16 +- drivers/mfd/dln2.c | 9 +- drivers/misc/echo/echo.c | 2 +- drivers/mtd/nand/spi/core.c | 17 +- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 + drivers/net/ethernet/neterion/vxge/vxge-config.h | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.h | 14 +- .../net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +- drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 31 +-- drivers/net/wireless/ath/ath9k/main.c | 3 + drivers/nvme/host/core.c | 11 + drivers/nvme/host/fc.c | 14 +- drivers/nvme/target/fcloop.c | 1 - drivers/pci/endpoint/pci-epc-mem.c | 10 +- drivers/pci/hotplug/pciehp_hpc.c | 14 +- drivers/pci/pcie/aspm.c | 4 +- drivers/pci/quirks.c | 80 ++++++- drivers/pci/switch/switchtec.c | 2 +- drivers/rtc/rtc-omap.c | 4 +- drivers/s390/scsi/zfcp_erp.c | 2 +- drivers/scsi/lpfc/lpfc_nvme.c | 2 - drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 +- drivers/scsi/qla2xxx/qla_nvme.c | 1 - drivers/staging/erofs/utils.c | 2 +- drivers/usb/dwc3/core.c | 5 + drivers/usb/dwc3/core.h | 4 + drivers/usb/gadget/composite.c | 9 + drivers/usb/gadget/function/f_fs.c | 1 + drivers/usb/host/xhci.c | 4 +- fs/btrfs/async-thread.c | 8 + fs/btrfs/async-thread.h | 1 + fs/btrfs/delayed-inode.c | 13 ++ fs/btrfs/disk-io.c | 27 ++- fs/btrfs/file.c | 11 + fs/btrfs/qgroup.c | 11 +- fs/btrfs/relocation.c | 35 ++-- fs/exec.c | 2 +- fs/ext4/inode.c | 2 +- fs/filesystems.c | 4 +- fs/gfs2/glock.c | 3 + fs/hfsplus/attributes.c | 4 + fs/nfs/write.c | 1 + fs/ocfs2/alloc.c | 4 + fs/pstore/inode.c | 5 +- fs/pstore/platform.c | 4 +- include/linux/devfreq_cooling.h | 2 +- include/linux/iocontext.h | 1 + include/linux/mlx5/mlx5_ifc.h | 9 +- include/linux/nvme-fc-driver.h | 4 - include/linux/pci-epc.h | 3 + include/linux/sched.h | 4 +- include/linux/swab.h | 1 + include/uapi/linux/swab.h | 10 + kernel/cpu.c | 5 +- kernel/irq/irqdomain.c | 10 +- kernel/kmod.c | 4 +- kernel/locking/lockdep.c | 4 + kernel/sched/sched.h | 8 +- kernel/signal.c | 2 +- kernel/trace/trace_kprobe.c | 2 + lib/find_bit.c | 16 +- mm/page_alloc.c | 8 +- mm/slub.c | 2 +- security/keys/key.c | 2 +- security/keys/keyctl.c | 4 +- sound/core/oss/pcm_plugin.c | 32 ++- sound/pci/hda/hda_beep.c | 6 +- sound/pci/hda/hda_intel.c | 16 ++ sound/pci/hda/patch_realtek.c | 50 +---- sound/pci/ice1712/prodigy_hifi.c | 4 +- sound/soc/soc-dapm.c | 8 +- sound/soc/soc-ops.c | 4 +- sound/soc/soc-pcm.c | 6 +- sound/soc/soc-topology.c | 2 +- sound/usb/mixer_maps.c | 28 +++ tools/gpio/Makefile | 2 +- tools/perf/Makefile.config | 11 +- tools/testing/selftests/vm/mlock2-tests.c | 233 ++++----------------- tools/testing/selftests/x86/ptrace_syscall.c | 8 +- 159 files changed, 1190 insertions(+), 777 deletions(-) create mode 100644 Documentation/sound/hd-audio/realtek-pc-beep.rst -- 1.8.3

1 144

[PATCH 1/2] ACPI: GED: implement powerkey evged freeze function
by Hongbo Yao 21 Apr '20

21 Apr '20

From: huangjun <huangjun63(a)huawei.com> If we want acpi ged to support wake from freeze, we need to implement the suspend/resume function. In these two methods, ACPI's _GPO, GPP method is called to realize the setting of sleep flag and anti-shake. Signed-off-by: Huangjun <huangjun63(a)huawei.com> --- drivers/acpi/evged.c | 82 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/drivers/acpi/evged.c b/drivers/acpi/evged.c index f13ba2c07667..84656fc09d15 100644 --- a/drivers/acpi/evged.c +++ b/drivers/acpi/evged.c @@ -46,11 +46,14 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/acpi.h> +#include <linux/timer.h> +#include <linux/jiffies.h> #define MODULE_NAME "acpi-ged" struct acpi_ged_device { struct device *dev; + struct timer_list timer; struct list_head event_list; }; @@ -148,6 +151,8 @@ static int ged_probe(struct platform_device *pdev) dev_err(&pdev->dev, "unable to parse the _CRS record\n"); return -EINVAL; } + + timer_setup(&geddev->timer, NULL, 0); platform_set_drvdata(pdev, geddev); return 0; @@ -164,6 +169,7 @@ static void ged_shutdown(struct platform_device *pdev) dev_dbg(geddev->dev, "GED releasing GSI %u @ IRQ %u\n", event->gsi, event->irq); } + del_timer(&geddev->timer); } static int ged_remove(struct platform_device *pdev) @@ -177,6 +183,78 @@ static const struct acpi_device_id ged_acpi_ids[] = { {}, }; +#ifdef CONFIG_PM_SLEEP +static acpi_status ged_acpi_execute(struct device *dev, char* method, u64 arg) +{ + acpi_status acpi_ret; + acpi_handle method_handle; + + acpi_ret = acpi_get_handle(ACPI_HANDLE(dev), method, &method_handle); + + if (ACPI_FAILURE(acpi_ret)) { + dev_err(dev, "cannot locate %s method\n", method); + return AE_NOT_FOUND; + } + + acpi_ret = acpi_execute_simple_method(method_handle, NULL, arg); + if (ACPI_FAILURE(acpi_ret)) { + dev_err(dev, "%s method execution failed\n", method); + return AE_ERROR; + } + + return AE_OK; +} + +static void ged_timer_callback(struct timer_list *t) +{ + struct acpi_ged_device *geddev = from_timer(geddev, t, timer); + struct acpi_ged_event *event, *next; + + list_for_each_entry_safe(event, next, &geddev->event_list, node) { + ged_acpi_execute(geddev->dev, "_GPP", event->gsi); + } +} + +static int ged_suspend(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_event *event, *next; + acpi_status acpi_ret; + + list_for_each_entry_safe(event, next, &geddev->event_list, node) { + acpi_ret = ged_acpi_execute(dev, "_GPO", event->gsi); + + if (acpi_ret == AE_ERROR) + return -EINVAL; + + enable_irq_wake(event->irq); + } + return 0; +} + +static int ged_resume(struct device *dev) +{ + struct acpi_ged_device *geddev = dev_get_drvdata(dev); + struct acpi_ged_event *event, *next; + + list_for_each_entry_safe(event, next, &geddev->event_list, node) { + disable_irq_wake(event->irq); + } + + /* use timer to complete 4s anti-shake */ + geddev->timer.expires = jiffies + (4 * HZ); + geddev->timer.function = ged_timer_callback; + add_timer(&geddev->timer); + + return 0; +} + +static const struct dev_pm_ops ged_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(ged_suspend, ged_resume) +}; +#endif + + static struct platform_driver ged_driver = { .probe = ged_probe, .remove = ged_remove, @@ -184,6 +262,10 @@ static struct platform_driver ged_driver = { .driver = { .name = MODULE_NAME, .acpi_match_table = ACPI_PTR(ged_acpi_ids), +#ifdef CONFIG_PM_SLEEP + .pm = &ged_pm_ops, +#endif + }, }; builtin_platform_driver(ged_driver); -- 2.20.1

1 1

[PATCH] irqchip/gic-v3-its: Fix the ITT address changing for hebernation.
by Hongbo Yao 20 Apr '20

20 Apr '20

From: Sunnanyong <sunnanyong(a)huawei.com> If we want to support S4 (suspend to Disk), it is necessary to guarantee that the ITS tables are at the same address in the booting kernel and the resumed kernel. That covers all the ITS tables and as well as the RDs'. To support this, allocting the itt memory from memory pool intead. Signed-off-by: Sunnanyong <sunnanyong(a)huawei.com> --- drivers/irqchip/irq-gic-v3-its.c | 72 ++++++++++++++++++++++++++++++-- 1 file changed, 69 insertions(+), 3 deletions(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 860f3ef2969e..9de585fe74fb 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -189,6 +189,14 @@ static DEFINE_IDA(its_vpeid_ida); #define gic_data_rdist_rd_base() (gic_data_rdist()->rd_base) #define gic_data_rdist_vlpi_base() (gic_data_rdist_rd_base() + SZ_128K) +static void *its_mem_pool_alloc(int dev_id); +#define ITS_MEM_POOL_SIZE (SZ_4M) +#define ITS_MEM_POOL_MAX (16) +#define GITS_OTHER_OFFSET 0x20000 +#define GITS_OTHER_REG_SIZE 0x100 +#define GITS_FUNC_REG_OFFSET 0x80 +static void *its_mem_pool[ITS_MEM_POOL_MAX] = {0}; + static u16 get_its_list(struct its_vm *vm) { struct its_node *its; @@ -2436,7 +2444,11 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id, nr_ites = max(2, nvecs); sz = nr_ites * its->ite_size; sz = max(sz, ITS_ITT_ALIGN) + ITS_ITT_ALIGN - 1; - itt = kzalloc_node(sz, GFP_KERNEL, its->numa_node); + + itt = its_mem_pool_alloc(dev_id); + if (!itt) + itt = kzalloc_node(sz, GFP_KERNEL, its->numa_node); + if (alloc_lpis) { lpi_map = its_lpi_alloc(nvecs, &lpi_base, &nr_lpis); if (lpi_map) @@ -2450,7 +2462,6 @@ static struct its_device *its_create_device(struct its_node *its, u32 dev_id, if (!dev || !itt || !col_map || (!lpi_map && alloc_lpis)) { kfree(dev); - kfree(itt); kfree(lpi_map); kfree(col_map); return NULL; @@ -2486,7 +2497,6 @@ static void its_free_device(struct its_device *its_dev) raw_spin_lock_irqsave(&its_dev->its->lock, flags); list_del(&its_dev->entry); raw_spin_unlock_irqrestore(&its_dev->its->lock, flags); - kfree(its_dev->itt); kfree(its_dev); } @@ -3798,11 +3808,41 @@ static int redist_disable_lpis(void) return 0; } +static void its_cpu_clear_cache(void) +{ + struct its_node *its; + u64 val = 0; + void __iomem *func_base; + + raw_spin_lock(&its_lock); + + list_for_each_entry(its, &its_nodes, entry) { + func_base = ioremap(its->phys_base + GITS_OTHER_OFFSET, + GITS_OTHER_REG_SIZE); + if (!func_base) { + pr_err("ITS@%p : Unable to map ITS OTHER registers\n", + (void *)(its->phys_base + GITS_OTHER_OFFSET)); + raw_spin_unlock(&its_lock); + return; + } + + val = readl_relaxed(func_base + GITS_FUNC_REG_OFFSET); + val = val | (0x7 << 16); + writel_relaxed(val, func_base + GITS_FUNC_REG_OFFSET); + dsb(sy); + iounmap(func_base); + } + + raw_spin_unlock(&its_lock); +} + + int its_cpu_init(void) { if (!list_empty(&its_nodes)) { int ret; + its_cpu_clear_cache(); ret = redist_disable_lpis(); if (ret) return ret; @@ -4001,6 +4041,7 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, struct its_node *its; bool has_v4 = false; int err; + int i; its_parent = parent_domain; of_node = to_of_node(handle); @@ -4014,6 +4055,16 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, return -ENXIO; } + for (i = 0; i < ITS_MEM_POOL_MAX; i++) { + if (!its_mem_pool[i]) { + its_mem_pool[i] = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(ITS_MEM_POOL_SIZE)); + if (!its_mem_pool[i]) + pr_err("err:[its mem[%d]] has no memory\n", i); + } + } + + gic_rdists = rdists; err = allocate_lpi_tables(); @@ -4035,3 +4086,18 @@ int __init its_init(struct fwnode_handle *handle, struct rdists *rdists, return 0; } + +void *its_mem_pool_alloc(int dev_id) +{ + int pool_num = dev_id / (ITS_MEM_POOL_SIZE / SZ_512); + int idx = dev_id % (ITS_MEM_POOL_SIZE / SZ_512); + void *addr = NULL; + + if (pool_num >= ITS_MEM_POOL_MAX || !its_mem_pool[pool_num]) { + pr_err("[its mem[%d]] alloc error\n", pool_num); + return NULL; + } + + addr = its_mem_pool[pool_num] + idx * SZ_512; + return addr; +} -- 2.20.1

1 0

[PATCH 00/22] Add support for Hygon Dhyana Family 18h processor
by Pu Wen 20 Apr '20

20 Apr '20

As a new x86 CPU Vendor, Chengdu Haiguang IC Design Co., Ltd (Hygon) is a Joint Venture between AMD and Haiguang Information Technology Co., Ltd., and aims at providing high performance x86 processor for China server market. The first generation Hygon's processor(Dhyana) originates from AMD technology and shares most of the architecture with AMD's family 17h, but with different CPU Vendor ID("HygonGenuine")/PCIE Device Vendor ID (0x1D94)/Family series number (Family 18h). To enable the support of Linux kernel to Hygon's CPU, we added a new vendor type (X86_VENDOR_HYGON, with value of 9) in arch/x86/include/ asm/processor.h, and shared most of kernel support codes with AMD family 17h. As Hygon will negotiate with AMD to make sure that only Hygon will use family 18h, so try to minimize code modification and share most codes with AMD under this consideration. This patch series have been applied and tested successfully on Hygon Dhyana SoC silicon. Also tested on AMD EPYC (Family 17h) processor, it works fine and makes no harm to the existing codes. This patch series are created for the current branch openEuler-1.0-LTS. References: [1] Linux kernel patches for Hygon Dhyana, merged in 4.20: https://git.kernel.org/tip/c9661c1e80b609cd038db7c908e061f0535804ef [2] MSR and CPUID definition: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0… Pu Wen (22): x86/cpu: Create Hygon Dhyana architecture support file x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana x86/events: Add Hygon Dhyana support to PMU infrastructure x86/alternative: Init ideal_nops for Hygon Dhyana x86/amd_nb: Check vendor in AMD-only functions x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge x86/apic: Add Hygon Dhyana support x86/bugs: Add Hygon Dhyana to the respective mitigation machinery x86/mce: Add Hygon Dhyana support to the MCA infrastructure x86/kvm: Add Hygon Dhyana support to KVM x86/xen: Add Hygon Dhyana support to Xen ACPI: Add Hygon Dhyana support cpufreq: Add Hygon Dhyana support EDAC, amd64: Add Hygon Dhyana support tools/cpupower: Add Hygon Dhyana support hwmon: (k10temp) Add Hygon Dhyana support x86/CPU/hygon: Fix phys_proc_id calculation logic for multi-die processors i2c-piix4: Add Hygon Dhyana SMBus support x86/amd_nb: Make hygon_nb_misc_ids static NTB: Add Hygon Device ID Documentation/i2c/busses/i2c-piix4 | 2 + MAINTAINERS | 6 + arch/x86/Kconfig.cpu | 14 + arch/x86/events/amd/core.c | 4 + arch/x86/events/amd/uncore.c | 20 +- arch/x86/events/core.c | 4 + arch/x86/include/asm/amd_nb.h | 3 + arch/x86/include/asm/cacheinfo.h | 1 + arch/x86/include/asm/kvm_emulate.h | 4 + arch/x86/include/asm/mce.h | 2 + arch/x86/include/asm/processor.h | 3 +- arch/x86/include/asm/virtext.h | 5 +- arch/x86/kernel/alternative.c | 4 + arch/x86/kernel/amd_nb.c | 49 ++- arch/x86/kernel/apic/apic.c | 7 + arch/x86/kernel/apic/probe_32.c | 1 + arch/x86/kernel/cpu/Makefile | 1 + arch/x86/kernel/cpu/bugs.c | 4 +- arch/x86/kernel/cpu/cacheinfo.c | 31 +- arch/x86/kernel/cpu/common.c | 4 + arch/x86/kernel/cpu/cpu.h | 1 + arch/x86/kernel/cpu/hygon.c | 413 ++++++++++++++++++ arch/x86/kernel/cpu/mce/core.c | 20 +- arch/x86/kernel/cpu/mce/severity.c | 3 +- arch/x86/kernel/cpu/mtrr/cleanup.c | 3 +- arch/x86/kernel/cpu/mtrr/mtrr.c | 2 +- arch/x86/kernel/cpu/perfctr-watchdog.c | 2 + arch/x86/kernel/smpboot.c | 4 +- arch/x86/kvm/emulate.c | 11 +- arch/x86/pci/amd_bus.c | 6 +- arch/x86/xen/pmu.c | 12 +- drivers/acpi/acpi_pad.c | 1 + drivers/acpi/processor_idle.c | 1 + drivers/cpufreq/acpi-cpufreq.c | 5 + drivers/cpufreq/amd_freq_sensitivity.c | 9 +- drivers/edac/amd64_edac.c | 10 +- drivers/edac/mce_amd.c | 4 +- drivers/hwmon/k10temp.c | 3 +- drivers/i2c/busses/Kconfig | 1 + drivers/i2c/busses/i2c-piix4.c | 15 +- drivers/ntb/hw/amd/ntb_hw_amd.c | 1 + include/linux/pci_ids.h | 2 + tools/power/cpupower/utils/cpufreq-info.c | 6 +- tools/power/cpupower/utils/helpers/amd.c | 4 +- tools/power/cpupower/utils/helpers/cpuid.c | 8 +- tools/power/cpupower/utils/helpers/helpers.h | 2 +- tools/power/cpupower/utils/helpers/misc.c | 2 +- .../utils/idle_monitor/mperf_monitor.c | 3 +- 48 files changed, 668 insertions(+), 55 deletions(-) create mode 100644 arch/x86/kernel/cpu/hygon.c -- 2.23.0

5 28

[PATCH 00/52] Backport lts patches from Linux-4.19.115
by Yang Yingliang 18 Apr '20

18 Apr '20

Alexander Usyskin (1): mei: me: add cedar fork device ids Amritha Nambiar (1): net: Fix Tx hash bound checking Arun KS (1): arm64: Fix size of __early_cpu_boot_status Avihai Horon (1): RDMA/cm: Update num_paths in cma_resolve_iboe_route error flow Chris Lew (1): rpmsg: glink: Remove chunk size word align warning Daniel Jordan (1): padata: always acquire cpu_hotplug_lock before pinst->lock David Ahern (1): tools/accounting/getdelays.c: fix netlink attribute length David Howells (1): rxrpc: Fix sendmsg(MSG_WAITALL) handling Eugene Syromiatnikov (1): coresight: do not use the BIT() macro in the UAPI header Eugeniy Paltsev (1): initramfs: restore default compression behavior Florian Fainelli (2): net: dsa: bcm_sf2: Do not register slave MDIO bus with OF net: dsa: bcm_sf2: Ensure correct sub-node is parsed Geoffrey Allott (1): ALSA: hda/ca0132 - Add Recon3Di quirk to handle integrated sound on EVGA X99 Classified motherboard Gerd Hoffmann (1): drm/bochs: downgrade pci_request_region failure from error to warning Greg Kroah-Hartman (1): Linux 4.19.115 Hans Verkuil (1): drm_dp_mst_topology: fix broken drm_dp_sideband_parse_remote_dpcd_read() Hans de Goede (2): extcon: axp288: Add wakeup support power: supply: axp288_charger: Add special handling for HP Pavilion x2 10 Ilya Dryomov (1): ceph: canonicalize server path in place James Zhu (1): drm/amdgpu: fix typo for vcn1 idle check Jarod Wilson (1): ipv6: don't auto-add link-local address to lag ports Jason A. Donenfeld (1): random: always use batched entropy for get_random_u{32, 64} Jason Gunthorpe (2): RDMA/ucma: Put a lock around every call to the rdma_cm layer RDMA/cma: Teach lockdep about the order of rtnl and lock Jisheng Zhang (1): net: stmmac: dwmac1000: fix out-of-bounds mac address reg setting Kaike Wan (2): IB/hfi1: Call kobject_put() when kobject_init_and_add() fails IB/hfi1: Fix memory leaks in sysfs registration and unregistration Kishon Vijay Abraham I (2): misc: pci_endpoint_test: Fix to support > 10 pci-endpoint-test devices misc: pci_endpoint_test: Avoid using module parameter to determine irqtype Len Brown (2): tools/power turbostat: Fix gcc build warnings tools/power turbostat: Fix missing SYS_LPI counter on some Chromebooks Lucas Stach (1): drm/etnaviv: replace MMU flush marker with flush sequence Marcelo Ricardo Leitner (1): sctp: fix possibly using a bad saddr with a given dst Mario Kleiner (1): drm/amd/display: Add link_rate quirk for Apple 15" MBP 2017 Martin Kaiser (1): hwrng: imx-rngc - fix an error path Oleksij Rempel (1): net: phy: micrel: kszphy_resume(): add delay after genphy_resume() before accessing PHY registers Paul Cercueil (1): ASoC: jz4740-i2s: Fix divider written at incorrect offset in register Petr Machata (1): mlxsw: spectrum_flower: Do not stop at FLOW_ACTION_VLAN_MANGLE Prabhath Sajeepa (1): nvme-rdma: Avoid double freeing of async event data Qian Cai (1): ipv4: fix a RCU-list lock in fib_triestat_seq_show Qiujun Huang (3): sctp: fix refcount bug in sctp_wfree Bluetooth: RFCOMM: fix ODEBUG bug in rfcomm_dev_ioctl fbcon: fix null-ptr-deref in fbcon_switch Rob Clark (2): drm/msm: stop abusing dma_map/unmap for cache drm/msm: Use the correct dma_sync calls in msm_gem Roger Quadros (1): usb: dwc3: don't set gadget->is_otg flag Sean Young (1): media: rc: IR signal for Panasonic air conditioner too long Taniya Das (1): clk: qcom: rcg: Return failure for RCG update Thinh Nguyen (1): usb: dwc3: gadget: Wrap around when skip TRBs William Dauchy (1): net, ip_tunnel: fix interface lookup with no key Xiubo Li (1): ceph: remove the extra slashes in the server path YueHaibing (1): misc: rtsx: set correct pcr_ops for rts522A Makefile | 2 +- arch/arm64/kernel/head.S | 2 +- drivers/char/hw_random/imx-rngc.c | 4 +- drivers/char/random.c | 20 ++------ drivers/clk/qcom/clk-rcg2.c | 2 +- drivers/extcon/extcon-axp288.c | 32 ++++++++++++ drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 11 +++++ drivers/gpu/drm/bochs/bochs_hw.c | 6 +-- drivers/gpu/drm/drm_dp_mst_topology.c | 1 + drivers/gpu/drm/etnaviv/etnaviv_buffer.c | 10 ++-- drivers/gpu/drm/etnaviv/etnaviv_gpu.h | 1 + drivers/gpu/drm/etnaviv/etnaviv_mmu.c | 6 +-- drivers/gpu/drm/etnaviv/etnaviv_mmu.h | 2 +- drivers/gpu/drm/msm/msm_gem.c | 47 ++++++++++++++++-- drivers/infiniband/core/cma.c | 14 ++++++ drivers/infiniband/core/ucma.c | 49 ++++++++++++++++++- drivers/infiniband/hw/hfi1/sysfs.c | 26 +++++++--- drivers/media/rc/lirc_dev.c | 2 +- drivers/misc/cardreader/rts5227.c | 1 + drivers/misc/mei/hw-me-regs.h | 2 + drivers/misc/mei/pci-me.c | 2 + drivers/misc/pci_endpoint_test.c | 14 ++++-- drivers/net/dsa/bcm_sf2.c | 9 +++- .../net/ethernet/mellanox/mlxsw/spectrum_flower.c | 8 +-- .../net/ethernet/stmicro/stmmac/dwmac1000_core.c | 2 +- drivers/net/phy/micrel.c | 7 +++ drivers/nvme/host/rdma.c | 8 +-- drivers/power/supply/axp288_charger.c | 57 +++++++++++++++++++++- drivers/rpmsg/qcom_glink_native.c | 3 -- drivers/usb/dwc3/gadget.c | 3 +- drivers/video/fbdev/core/fbcon.c | 3 ++ fs/ceph/super.c | 56 +++++++++++++-------- fs/ceph/super.h | 2 +- include/uapi/linux/coresight-stm.h | 6 ++- kernel/padata.c | 4 +- net/bluetooth/rfcomm/tty.c | 4 +- net/core/dev.c | 2 + net/ipv4/fib_trie.c | 3 ++ net/ipv4/ip_tunnel.c | 6 +-- net/ipv6/addrconf.c | 4 ++ net/rxrpc/sendmsg.c | 4 +- net/sctp/ipv6.c | 20 +++++--- net/sctp/protocol.c | 28 +++++++---- net/sctp/socket.c | 31 +++++++++--- sound/pci/hda/patch_ca0132.c | 1 + sound/soc/jz4740/jz4740-i2s.c | 2 +- tools/accounting/getdelays.c | 2 +- tools/power/x86/turbostat/turbostat.c | 27 +++++----- usr/Kconfig | 22 ++++----- 50 files changed, 434 insertions(+), 148 deletions(-) -- 1.8.3

1 52

[PATCH] srcu: Apply *_ONCE() to ->srcu_last_gp_end
by Yang Yingliang 18 Apr '20

18 Apr '20

From: "Paul E. McKenney" <paulmck(a)kernel.org> mainline inclusion from mainline-v5.6-rc1 commit 844a378de3372c923909681706d62336d702531e category: bugfix bugzilla: 28851 CVE: NA ------------------------------------------------------------------------- The ->srcu_last_gp_end field is accessed from any CPU at any time by synchronize_srcu(), so non-initialization references need to use READ_ONCE() and WRITE_ONCE(). This commit therefore makes that change. Reported-by: syzbot+08f3e9d26e5541e1ecf2(a)syzkaller.appspotmail.com Acked-by: Marco Elver <elver(a)google.com> Signed-off-by: Paul E. McKenney <paulmck(a)kernel.org> Conflicts: kernel/rcu/srcutree.c Signed-off-by: Zhen Lei <thunder.leizhen(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/rcu/srcutree.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/kernel/rcu/srcutree.c b/kernel/rcu/srcutree.c index 4b0a6e3..7bd0204 100644 --- a/kernel/rcu/srcutree.c +++ b/kernel/rcu/srcutree.c @@ -552,7 +552,7 @@ static void srcu_gp_end(struct srcu_struct *sp) idx = rcu_seq_state(sp->srcu_gp_seq); WARN_ON_ONCE(idx != SRCU_STATE_SCAN2); cbdelay = srcu_get_delay(sp); - sp->srcu_last_gp_end = ktime_get_mono_fast_ns(); + WRITE_ONCE(sp->srcu_last_gp_end, ktime_get_mono_fast_ns()); rcu_seq_end(&sp->srcu_gp_seq); gpseq = rcu_seq_current(&sp->srcu_gp_seq); if (ULONG_CMP_LT(sp->srcu_gp_seq_needed_exp, gpseq)) @@ -780,6 +780,7 @@ static bool srcu_might_be_idle(struct srcu_struct *sp) unsigned long flags; struct srcu_data *sdp; unsigned long t; + unsigned long tlast; /* If the local srcu_data structure has callbacks, not idle. */ local_irq_save(flags); @@ -798,9 +799,9 @@ static bool srcu_might_be_idle(struct srcu_struct *sp) /* First, see if enough time has passed since the last GP. */ t = ktime_get_mono_fast_ns(); + tlast = READ_ONCE(sp->srcu_last_gp_end); if (exp_holdoff == 0 || - time_in_range_open(t, sp->srcu_last_gp_end, - sp->srcu_last_gp_end + exp_holdoff)) + time_in_range_open(t, tlast, tlast + exp_holdoff)) return false; /* Too soon after last GP. */ /* Next, check for probable idleness. */ -- 1.8.3

1 0

[PATCH 1/2] iommu/dma: Fix for dereferencing before null checking
by Yang Yingliang 18 Apr '20

18 Apr '20

From: Yunsheng Lin <linyunsheng(a)huawei.com> mainline inclusion from mainline-v5.4-rc1 commit 6b0c54e7f2715997c366e8374209bc74259b0a59 category: bugfix bugzilla: 21318 CVE: NA ------------------------------------------------------------------------- The cookie is dereferenced before null checking in the function iommu_dma_init_domain. This patch moves the dereferencing after the null checking. Fixes: fdbe574eb693 ("iommu/dma: Allow MSI-only cookies") Signed-off-by: Yunsheng Lin <linyunsheng(a)huawei.com> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Conflicts: drivers/iommu/dma-iommu.c Signed-off-by: Zhen Lei <thunder.leizhen(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/dma-iommu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/dma-iommu.c b/drivers/iommu/dma-iommu.c index 64ae17e8b..b68d9fd 100644 --- a/drivers/iommu/dma-iommu.c +++ b/drivers/iommu/dma-iommu.c @@ -290,13 +290,15 @@ int iommu_dma_init_domain(struct iommu_domain *domain, dma_addr_t base, u64 size, struct device *dev) { struct iommu_dma_cookie *cookie = domain->iova_cookie; - struct iova_domain *iovad = &cookie->iovad; unsigned long order, base_pfn, end_pfn; + struct iova_domain *iovad; int attr; if (!cookie || cookie->type != IOMMU_DMA_IOVA_COOKIE) return -EINVAL; + iovad = &cookie->iovad; + /* Use the smallest supported page size for IOVA granularity */ order = __ffs(domain->pgsize_bitmap); base_pfn = max_t(unsigned long, 1, base >> order); -- 1.8.3

1 1

[PATCH] net/hinic: fix the problem that out-of-bounds access
by Yang Yingliang 18 Apr '20

18 Apr '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category: bugfix bugzilla: 4472 ----------------------------------------------------------------------- Fix the problem that out-of-bounds access caused by user input In order to solve the problem, restrictions are imposed on each input which is done in kernel driver. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_nictool.c | 18 ++++++++++++++++++ drivers/net/ethernet/huawei/hinic/hinic_nictool.h | 2 ++ drivers/net/ethernet/huawei/hinic/hinic_sml_counter.c | 16 +++++++++++++--- 3 files changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c index 46dd9ec..df01088 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c @@ -1712,6 +1712,19 @@ static u32 get_up_timeout_val(enum hinic_mod_type mod, u8 cmd) return UP_COMP_TIME_OUT_VAL; } +static int check_useparam_valid(struct msg_module *nt_msg, void *buf_in) +{ + struct csr_write_st *csr_write_msg = (struct csr_write_st *)buf_in; + u32 rd_len = csr_write_msg->rd_len; + + if (rd_len > TOOL_COUNTER_MAX_LEN) { + pr_err("Csr read or write len is invalid!\n"); + return -EINVAL; + } + + return 0; +} + static int send_to_up(void *hwdev, struct msg_module *nt_msg, void *buf_in, u32 in_size, void *buf_out, u32 *out_size) { @@ -1744,6 +1757,9 @@ static int send_to_up(void *hwdev, struct msg_module *nt_msg, } } else if (nt_msg->up_cmd.up_db.up_api_type == API_CHAIN) { + if (check_useparam_valid(nt_msg, buf_in)) + return -EINVAL; + if (nt_msg->up_cmd.up_db.chipif_cmd == API_CSR_WRITE) { ret = api_csr_write(hwdev, nt_msg, buf_in, in_size, buf_out, out_size); @@ -1994,6 +2010,8 @@ static int get_all_chip_id_cmd(struct msg_module *nt_msg) { struct nic_card_id card_id; + memset(&card_id, 0, sizeof(card_id)); + hinic_get_all_chip_id((void *)&card_id); if (copy_to_user(nt_msg->out_buf, &card_id, sizeof(card_id))) { diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nictool.h b/drivers/net/ethernet/huawei/hinic/hinic_nictool.h index cfbe435..e8eccaf 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nictool.h +++ b/drivers/net/ethernet/huawei/hinic/hinic_nictool.h @@ -285,4 +285,6 @@ struct hinic_pf_info { extern void hinic_get_io_stats(struct hinic_nic_dev *nic_dev, struct hinic_show_item *items); +#define TOOL_COUNTER_MAX_LEN 512 + #endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sml_counter.c b/drivers/net/ethernet/huawei/hinic/hinic_sml_counter.c index 9536adf..eb35df6 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_sml_counter.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_sml_counter.c @@ -253,9 +253,19 @@ int hinic_sm_ctr_rd64_pair(void *hwdev, u8 node, u8 instance, ctr_rd_rsp_u rsp; int ret; - if (!hwdev || (0 != (ctr_id & 0x1)) || !value1 || !value2) { - pr_err("Hwdev(0x%p) or value1(0x%p) or value2(0x%p) is NULL or ctr_id(%d) is odd number\n", - hwdev, value1, value2, ctr_id); + if (!value1) { + pr_err("value1 is NULL for read 64 bit pair\n"); + return -EFAULT; + } + + if (!value2) { + pr_err("value2 is NULL for read 64 bit pair\n"); + return -EFAULT; + } + + if (!hwdev || (0 != (ctr_id & 0x1))) { + pr_err("Hwdev is NULL or ctr_id(%d) is odd number for read 64 bit pair\n", + ctr_id); return -EFAULT; } -- 1.8.3

1 0

[PATCH 1/2] scsi: sg: add sg_remove_request in sg_common_write
by Yang Yingliang 18 Apr '20

18 Apr '20

From: Li Bin <huawei.libin(a)huawei.com> hulk inclusion category: bugfix bugzilla: 34234 CVE: NA -------------------------------- If the dxfer_len is greater than 256M then the request is invalid, it should call sg_remove_request in sg_common_write. Fixes: f930c7043663 ("scsi: sg: only check for dxfer_len greater than 256M") Signed-off-by: Li Bin <huawei.libin(a)huawei.com> Acked-by: Douglas Gilbert <dgilbert(a)interlog.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/sg.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c index c75324a..9c4b71e 100644 --- a/drivers/scsi/sg.c +++ b/drivers/scsi/sg.c @@ -808,8 +808,10 @@ static int sg_allow_access(struct file *filp, unsigned char *cmd) "sg_common_write: scsi opcode=0x%02x, cmd_size=%d\n", (int) cmnd[0], (int) hp->cmd_len)); - if (hp->dxfer_len >= SZ_256M) + if (hp->dxfer_len >= SZ_256M) { + sg_remove_request(sfp, srp); return -EINVAL; + } k = sg_start_req(srp, cmnd); if (k) { -- 1.8.3

1 1

[PATCH 1/2] btrfs: extent_io: Handle errors better in extent_write_full_page()
by Yang Yingliang 18 Apr '20

18 Apr '20

From: Qu Wenruo <wqu(a)suse.com> mainline inclusion from mainline-v5.2-rc2 commit 3065976b045f77a910809fa7699f99a1e7c0dbbb category: bugfix bugzilla: 13690 CVE: CVE-2019-19377 Introduce end_write_bio() for CVE-2019-19377. ------------------------------------------------- Since now flush_write_bio() could return error, kill the BUG_ON() first. Then don't call flush_write_bio() unconditionally, instead we check the return value from __extent_writepage() first. If __extent_writepage() fails, we do cleanup, and return error without submitting the possible corrupted or half-baked bio. If __extent_writepage() successes, then we call flush_write_bio() and return the result. Signed-off-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Conflicts: fs/btrfs/extent_io.c [yyl: adjust context] Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/extent_io.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 11efb4f..7f2990f 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -2731,6 +2731,16 @@ static int __must_check submit_one_bio(struct bio *bio, int mirror_num, return blk_status_to_errno(ret); } +/* Cleanup unsubmitted bios */ +static void end_write_bio(struct extent_page_data *epd, int ret) +{ + if (epd->bio) { + epd->bio->bi_status = errno_to_blk_status(ret); + bio_endio(epd->bio); + epd->bio = NULL; + } +} + /* * @opf: bio REQ_OP_* and REQ_* flags as one value * @tree: tree so we can call our merge_bio hook @@ -3438,6 +3448,9 @@ static noinline_for_stack int __extent_writepage_io(struct inode *inode, * records are inserted to lock ranges in the tree, and as dirty areas * are found, they are marked writeback. Then the lock bits are removed * and the end_io handler clears the writeback ranges + * + * Return 0 if everything goes well. + * Return <0 for error. */ static int __extent_writepage(struct page *page, struct writeback_control *wbc, struct extent_page_data *epd) @@ -3505,6 +3518,7 @@ static int __extent_writepage(struct page *page, struct writeback_control *wbc, end_extent_writepage(page, ret, start, page_end); } unlock_page(page); + ASSERT(ret <= 0); return ret; done_unlocked: @@ -4054,6 +4068,11 @@ int extent_write_full_page(struct page *page, struct writeback_control *wbc) }; ret = __extent_writepage(page, wbc, &epd); + ASSERT(ret <= 0); + if (ret < 0) { + end_write_bio(&epd, ret); + return ret; + } flush_write_bio(&epd); return ret; -- 1.8.3

1 1

[PATCH] net/hinic: Delete useless header files
by Yang Yingliang 18 Apr '20

18 Apr '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category: cleanup bugzilla: 4472 ----------------------------------------------------------------------- Delete useless header files Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_common.c | 80 - drivers/net/ethernet/huawei/hinic/hinic_common.h | 38 - drivers/net/ethernet/huawei/hinic/hinic_dev.h | 64 - .../net/ethernet/huawei/hinic/hinic_hw_api_cmd.c | 978 ------- .../net/ethernet/huawei/hinic/hinic_hw_api_cmd.h | 208 -- drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 947 ------- drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h | 187 -- drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h | 149 -- drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c | 1010 -------- drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h | 239 -- drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c | 886 ------- drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h | 265 -- drivers/net/ethernet/huawei/hinic/hinic_hw_if.c | 351 --- drivers/net/ethernet/huawei/hinic/hinic_hw_if.h | 272 -- drivers/net/ethernet/huawei/hinic/hinic_hw_io.c | 533 ---- drivers/net/ethernet/huawei/hinic/hinic_hw_io.h | 97 - drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c | 597 ----- drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c | 907 ------- drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h | 205 -- .../net/ethernet/huawei/hinic/hinic_hw_qp_ctxt.h | 214 -- drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c | 878 ------- drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h | 117 - drivers/net/ethernet/huawei/hinic/hinic_hw_wqe.h | 368 --- drivers/net/ethernet/huawei/hinic/hinic_port.c | 379 --- drivers/net/ethernet/huawei/hinic/hinic_port.h | 198 -- .../net/ethernet/huawei/hinic/hinic_sml_table.h | 2728 -------------------- .../ethernet/huawei/hinic/hinic_sml_table_pub.h | 277 -- 27 files changed, 13172 deletions(-) delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_common.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_common.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_dev.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_if.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_if.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_io.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_io.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_qp_ctxt.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_hw_wqe.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_port.c delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_port.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_sml_table.h delete mode 100644 drivers/net/ethernet/huawei/hinic/hinic_sml_table_pub.h diff --git a/drivers/net/ethernet/huawei/hinic/hinic_common.c b/drivers/net/ethernet/huawei/hinic/hinic_common.c deleted file mode 100644 index 02c74fd..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_common.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <asm/byteorder.h> - -#include "hinic_common.h" - -/** - * hinic_cpu_to_be32 - convert data to big endian 32 bit format - * @data: the data to convert - * @len: length of data to convert - **/ -void hinic_cpu_to_be32(void *data, int len) -{ - u32 *mem = data; - int i; - - len = len / sizeof(u32); - - for (i = 0; i < len; i++) { - *mem = cpu_to_be32(*mem); - mem++; - } -} - -/** - * hinic_be32_to_cpu - convert data from big endian 32 bit format - * @data: the data to convert - * @len: length of data to convert - **/ -void hinic_be32_to_cpu(void *data, int len) -{ - u32 *mem = data; - int i; - - len = len / sizeof(u32); - - for (i = 0; i < len; i++) { - *mem = be32_to_cpu(*mem); - mem++; - } -} - -/** - * hinic_set_sge - set dma area in scatter gather entry - * @sge: scatter gather entry - * @addr: dma address - * @len: length of relevant data in the dma address - **/ -void hinic_set_sge(struct hinic_sge *sge, dma_addr_t addr, int len) -{ - sge->hi_addr = upper_32_bits(addr); - sge->lo_addr = lower_32_bits(addr); - sge->len = len; -} - -/** - * hinic_sge_to_dma - get dma address from scatter gather entry - * @sge: scatter gather entry - * - * Return dma address of sg entry - **/ -dma_addr_t hinic_sge_to_dma(struct hinic_sge *sge) -{ - return (dma_addr_t)((((u64)sge->hi_addr) << 32) | sge->lo_addr); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_common.h b/drivers/net/ethernet/huawei/hinic/hinic_common.h deleted file mode 100644 index 2c06b76..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_common.h +++ /dev/null @@ -1,38 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_COMMON_H -#define HINIC_COMMON_H - -#include <linux/types.h> - -#define UPPER_8_BITS(data) (((data) >> 8) & 0xFF) -#define LOWER_8_BITS(data) ((data) & 0xFF) - -struct hinic_sge { - u32 hi_addr; - u32 lo_addr; - u32 len; -}; - -void hinic_cpu_to_be32(void *data, int len); - -void hinic_be32_to_cpu(void *data, int len); - -void hinic_set_sge(struct hinic_sge *sge, dma_addr_t addr, int len); - -dma_addr_t hinic_sge_to_dma(struct hinic_sge *sge); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_dev.h deleted file mode 100644 index 5186cc9..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_dev.h +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_DEV_H -#define HINIC_DEV_H - -#include <linux/netdevice.h> -#include <linux/types.h> -#include <linux/semaphore.h> -#include <linux/workqueue.h> -#include <linux/bitops.h> - -#include "hinic_hw_dev.h" -#include "hinic_tx.h" -#include "hinic_rx.h" - -#define HINIC_DRV_NAME "hinic" - -enum hinic_flags { - HINIC_LINK_UP = BIT(0), - HINIC_INTF_UP = BIT(1), -}; - -struct hinic_rx_mode_work { - struct work_struct work; - u32 rx_mode; -}; - -struct hinic_dev { - struct net_device *netdev; - struct hinic_hwdev *hwdev; - - u32 msg_enable; - unsigned int tx_weight; - unsigned int rx_weight; - - unsigned int flags; - - struct semaphore mgmt_lock; - unsigned long *vlan_bitmap; - - struct hinic_rx_mode_work rx_mode_work; - struct workqueue_struct *workq; - - struct hinic_txq *txqs; - struct hinic_rxq *rxqs; - - struct hinic_txq_stats tx_stats; - struct hinic_rxq_stats rx_stats; -}; - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c deleted file mode 100644 index c40603a..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.c +++ /dev/null @@ -1,978 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/bitops.h> -#include <linux/err.h> -#include <linux/jiffies.h> -#include <linux/delay.h> -#include <linux/log2.h> -#include <linux/semaphore.h> -#include <asm/byteorder.h> -#include <asm/barrier.h> - -#include "hinic_hw_csr.h" -#include "hinic_hw_if.h" -#include "hinic_hw_api_cmd.h" - -#define API_CHAIN_NUM_CELLS 32 - -#define API_CMD_CELL_SIZE_SHIFT 6 -#define API_CMD_CELL_SIZE_MIN (BIT(API_CMD_CELL_SIZE_SHIFT)) - -#define API_CMD_CELL_SIZE(cell_size) \ - (((cell_size) >= API_CMD_CELL_SIZE_MIN) ? \ - (1 << (fls(cell_size - 1))) : API_CMD_CELL_SIZE_MIN) - -#define API_CMD_CELL_SIZE_VAL(size) \ - ilog2((size) >> API_CMD_CELL_SIZE_SHIFT) - -#define API_CMD_BUF_SIZE 2048 - -/* Sizes of the members in hinic_api_cmd_cell */ -#define API_CMD_CELL_DESC_SIZE 8 -#define API_CMD_CELL_DATA_ADDR_SIZE 8 - -#define API_CMD_CELL_ALIGNMENT 8 - -#define API_CMD_TIMEOUT 1000 - -#define MASKED_IDX(chain, idx) ((idx) & ((chain)->num_cells - 1)) - -#define SIZE_8BYTES(size) (ALIGN((size), 8) >> 3) -#define SIZE_4BYTES(size) (ALIGN((size), 4) >> 2) - -#define RD_DMA_ATTR_DEFAULT 0 -#define WR_DMA_ATTR_DEFAULT 0 - -enum api_cmd_data_format { - SGE_DATA = 1, /* cell data is passed by hw address */ -}; - -enum api_cmd_type { - API_CMD_WRITE = 0, -}; - -enum api_cmd_bypass { - NO_BYPASS = 0, - BYPASS = 1, -}; - -enum api_cmd_xor_chk_level { - XOR_CHK_DIS = 0, - - XOR_CHK_ALL = 3, -}; - -static u8 xor_chksum_set(void *data) -{ - int idx; - u8 *val, checksum = 0; - - val = data; - - for (idx = 0; idx < 7; idx++) - checksum ^= val[idx]; - - return checksum; -} - -static void set_prod_idx(struct hinic_api_cmd_chain *chain) -{ - enum hinic_api_cmd_chain_type chain_type = chain->chain_type; - struct hinic_hwif *hwif = chain->hwif; - u32 addr, prod_idx; - - addr = HINIC_CSR_API_CMD_CHAIN_PI_ADDR(chain_type); - prod_idx = hinic_hwif_read_reg(hwif, addr); - - prod_idx = HINIC_API_CMD_PI_CLEAR(prod_idx, IDX); - - prod_idx |= HINIC_API_CMD_PI_SET(chain->prod_idx, IDX); - - hinic_hwif_write_reg(hwif, addr, prod_idx); -} - -static u32 get_hw_cons_idx(struct hinic_api_cmd_chain *chain) -{ - u32 addr, val; - - addr = HINIC_CSR_API_CMD_STATUS_ADDR(chain->chain_type); - val = hinic_hwif_read_reg(chain->hwif, addr); - - return HINIC_API_CMD_STATUS_GET(val, CONS_IDX); -} - -/** - * chain_busy - check if the chain is still processing last requests - * @chain: chain to check - * - * Return 0 - Success, negative - Failure - **/ -static int chain_busy(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - u32 prod_idx; - - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - chain->cons_idx = get_hw_cons_idx(chain); - prod_idx = chain->prod_idx; - - /* check for a space for a new command */ - if (chain->cons_idx == MASKED_IDX(chain, prod_idx + 1)) { - dev_err(&pdev->dev, "API CMD chain %d is busy\n", - chain->chain_type); - return -EBUSY; - } - break; - - default: - dev_err(&pdev->dev, "Unknown API CMD Chain type\n"); - break; - } - - return 0; -} - -/** - * get_cell_data_size - get the data size of a specific cell type - * @type: chain type - * - * Return the data(Desc + Address) size in the cell - **/ -static u8 get_cell_data_size(enum hinic_api_cmd_chain_type type) -{ - u8 cell_data_size = 0; - - switch (type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - cell_data_size = ALIGN(API_CMD_CELL_DESC_SIZE + - API_CMD_CELL_DATA_ADDR_SIZE, - API_CMD_CELL_ALIGNMENT); - break; - default: - break; - } - - return cell_data_size; -} - -/** - * prepare_cell_ctrl - prepare the ctrl of the cell for the command - * @cell_ctrl: the control of the cell to set the control value into it - * @data_size: the size of the data in the cell - **/ -static void prepare_cell_ctrl(u64 *cell_ctrl, u16 data_size) -{ - u8 chksum; - u64 ctrl; - - ctrl = HINIC_API_CMD_CELL_CTRL_SET(SIZE_8BYTES(data_size), DATA_SZ) | - HINIC_API_CMD_CELL_CTRL_SET(RD_DMA_ATTR_DEFAULT, RD_DMA_ATTR) | - HINIC_API_CMD_CELL_CTRL_SET(WR_DMA_ATTR_DEFAULT, WR_DMA_ATTR); - - chksum = xor_chksum_set(&ctrl); - - ctrl |= HINIC_API_CMD_CELL_CTRL_SET(chksum, XOR_CHKSUM); - - /* The data in the HW should be in Big Endian Format */ - *cell_ctrl = cpu_to_be64(ctrl); -} - -/** - * prepare_api_cmd - prepare API CMD command - * @chain: chain for the command - * @dest: destination node on the card that will receive the command - * @cmd: command data - * @cmd_size: the command size - **/ -static void prepare_api_cmd(struct hinic_api_cmd_chain *chain, - enum hinic_node_id dest, - void *cmd, u16 cmd_size) -{ - struct hinic_api_cmd_cell *cell = chain->curr_node; - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - - cell_ctxt = &chain->cell_ctxt[chain->prod_idx]; - - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - cell->desc = HINIC_API_CMD_DESC_SET(SGE_DATA, API_TYPE) | - HINIC_API_CMD_DESC_SET(API_CMD_WRITE, RD_WR) | - HINIC_API_CMD_DESC_SET(NO_BYPASS, MGMT_BYPASS); - break; - - default: - dev_err(&pdev->dev, "unknown Chain type\n"); - return; - } - - cell->desc |= HINIC_API_CMD_DESC_SET(dest, DEST) | - HINIC_API_CMD_DESC_SET(SIZE_4BYTES(cmd_size), SIZE); - - cell->desc |= HINIC_API_CMD_DESC_SET(xor_chksum_set(&cell->desc), - XOR_CHKSUM); - - /* The data in the HW should be in Big Endian Format */ - cell->desc = cpu_to_be64(cell->desc); - - memcpy(cell_ctxt->api_cmd_vaddr, cmd, cmd_size); -} - -/** - * prepare_cell - prepare cell ctrl and cmd in the current cell - * @chain: chain for the command - * @dest: destination node on the card that will receive the command - * @cmd: command data - * @cmd_size: the command size - * - * Return 0 - Success, negative - Failure - **/ -static void prepare_cell(struct hinic_api_cmd_chain *chain, - enum hinic_node_id dest, - void *cmd, u16 cmd_size) -{ - struct hinic_api_cmd_cell *curr_node = chain->curr_node; - u16 data_size = get_cell_data_size(chain->chain_type); - - prepare_cell_ctrl(&curr_node->ctrl, data_size); - prepare_api_cmd(chain, dest, cmd, cmd_size); -} - -static inline void cmd_chain_prod_idx_inc(struct hinic_api_cmd_chain *chain) -{ - chain->prod_idx = MASKED_IDX(chain, chain->prod_idx + 1); -} - -/** - * api_cmd_status_update - update the status in the chain struct - * @chain: chain to update - **/ -static void api_cmd_status_update(struct hinic_api_cmd_chain *chain) -{ - enum hinic_api_cmd_chain_type chain_type; - struct hinic_api_cmd_status *wb_status; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - u64 status_header; - u32 status; - - wb_status = chain->wb_status; - status_header = be64_to_cpu(wb_status->header); - - status = be32_to_cpu(wb_status->status); - if (HINIC_API_CMD_STATUS_GET(status, CHKSUM_ERR)) { - dev_err(&pdev->dev, "API CMD status: Xor check error\n"); - return; - } - - chain_type = HINIC_API_CMD_STATUS_HEADER_GET(status_header, CHAIN_ID); - if (chain_type >= HINIC_API_CMD_MAX) { - dev_err(&pdev->dev, "unknown API CMD Chain %d\n", chain_type); - return; - } - - chain->cons_idx = HINIC_API_CMD_STATUS_GET(status, CONS_IDX); -} - -/** - * wait_for_status_poll - wait for write to api cmd command to complete - * @chain: the chain of the command - * - * Return 0 - Success, negative - Failure - **/ -static int wait_for_status_poll(struct hinic_api_cmd_chain *chain) -{ - int err = -ETIMEDOUT; - unsigned long end; - - end = jiffies + msecs_to_jiffies(API_CMD_TIMEOUT); - do { - api_cmd_status_update(chain); - - /* wait for CI to be updated - sign for completion */ - if (chain->cons_idx == chain->prod_idx) { - err = 0; - break; - } - - msleep(20); - } while (time_before(jiffies, end)); - - return err; -} - -/** - * wait_for_api_cmd_completion - wait for command to complete - * @chain: chain for the command - * - * Return 0 - Success, negative - Failure - **/ -static int wait_for_api_cmd_completion(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - int err; - - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - err = wait_for_status_poll(chain); - if (err) { - dev_err(&pdev->dev, "API CMD Poll status timeout\n"); - break; - } - break; - - default: - dev_err(&pdev->dev, "unknown API CMD Chain type\n"); - err = -EINVAL; - break; - } - - return err; -} - -/** - * api_cmd - API CMD command - * @chain: chain for the command - * @dest: destination node on the card that will receive the command - * @cmd: command data - * @size: the command size - * - * Return 0 - Success, negative - Failure - **/ -static int api_cmd(struct hinic_api_cmd_chain *chain, - enum hinic_node_id dest, u8 *cmd, u16 cmd_size) -{ - struct hinic_api_cmd_cell_ctxt *ctxt; - int err; - - down(&chain->sem); - if (chain_busy(chain)) { - up(&chain->sem); - return -EBUSY; - } - - prepare_cell(chain, dest, cmd, cmd_size); - cmd_chain_prod_idx_inc(chain); - - wmb(); /* inc pi before issue the command */ - - set_prod_idx(chain); /* issue the command */ - - ctxt = &chain->cell_ctxt[chain->prod_idx]; - - chain->curr_node = ctxt->cell_vaddr; - - err = wait_for_api_cmd_completion(chain); - - up(&chain->sem); - return err; -} - -/** - * hinic_api_cmd_write - Write API CMD command - * @chain: chain for write command - * @dest: destination node on the card that will receive the command - * @cmd: command data - * @size: the command size - * - * Return 0 - Success, negative - Failure - **/ -int hinic_api_cmd_write(struct hinic_api_cmd_chain *chain, - enum hinic_node_id dest, u8 *cmd, u16 size) -{ - /* Verify the chain type */ - if (chain->chain_type == HINIC_API_CMD_WRITE_TO_MGMT_CPU) - return api_cmd(chain, dest, cmd, size); - - return -EINVAL; -} - -/** - * api_cmd_hw_restart - restart the chain in the HW - * @chain: the API CMD specific chain to restart - * - * Return 0 - Success, negative - Failure - **/ -static int api_cmd_hw_restart(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - int err = -ETIMEDOUT; - unsigned long end; - u32 reg_addr, val; - - /* Read Modify Write */ - reg_addr = HINIC_CSR_API_CMD_CHAIN_REQ_ADDR(chain->chain_type); - val = hinic_hwif_read_reg(hwif, reg_addr); - - val = HINIC_API_CMD_CHAIN_REQ_CLEAR(val, RESTART); - val |= HINIC_API_CMD_CHAIN_REQ_SET(1, RESTART); - - hinic_hwif_write_reg(hwif, reg_addr, val); - - end = jiffies + msecs_to_jiffies(API_CMD_TIMEOUT); - do { - val = hinic_hwif_read_reg(hwif, reg_addr); - - if (!HINIC_API_CMD_CHAIN_REQ_GET(val, RESTART)) { - err = 0; - break; - } - - msleep(20); - } while (time_before(jiffies, end)); - - return err; -} - -/** - * api_cmd_ctrl_init - set the control register of a chain - * @chain: the API CMD specific chain to set control register for - **/ -static void api_cmd_ctrl_init(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - u32 addr, ctrl; - u16 cell_size; - - /* Read Modify Write */ - addr = HINIC_CSR_API_CMD_CHAIN_CTRL_ADDR(chain->chain_type); - - cell_size = API_CMD_CELL_SIZE_VAL(chain->cell_size); - - ctrl = hinic_hwif_read_reg(hwif, addr); - - ctrl = HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, RESTART_WB_STAT) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, XOR_ERR) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, AEQE_EN) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, XOR_CHK_EN) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, CELL_SIZE); - - ctrl |= HINIC_API_CMD_CHAIN_CTRL_SET(1, XOR_ERR) | - HINIC_API_CMD_CHAIN_CTRL_SET(XOR_CHK_ALL, XOR_CHK_EN) | - HINIC_API_CMD_CHAIN_CTRL_SET(cell_size, CELL_SIZE); - - hinic_hwif_write_reg(hwif, addr, ctrl); -} - -/** - * api_cmd_set_status_addr - set the status address of a chain in the HW - * @chain: the API CMD specific chain to set in HW status address for - **/ -static void api_cmd_set_status_addr(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - u32 addr, val; - - addr = HINIC_CSR_API_CMD_STATUS_HI_ADDR(chain->chain_type); - val = upper_32_bits(chain->wb_status_paddr); - hinic_hwif_write_reg(hwif, addr, val); - - addr = HINIC_CSR_API_CMD_STATUS_LO_ADDR(chain->chain_type); - val = lower_32_bits(chain->wb_status_paddr); - hinic_hwif_write_reg(hwif, addr, val); -} - -/** - * api_cmd_set_num_cells - set the number cells of a chain in the HW - * @chain: the API CMD specific chain to set in HW the number of cells for - **/ -static void api_cmd_set_num_cells(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - u32 addr, val; - - addr = HINIC_CSR_API_CMD_CHAIN_NUM_CELLS_ADDR(chain->chain_type); - val = chain->num_cells; - hinic_hwif_write_reg(hwif, addr, val); -} - -/** - * api_cmd_head_init - set the head of a chain in the HW - * @chain: the API CMD specific chain to set in HW the head for - **/ -static void api_cmd_head_init(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - u32 addr, val; - - addr = HINIC_CSR_API_CMD_CHAIN_HEAD_HI_ADDR(chain->chain_type); - val = upper_32_bits(chain->head_cell_paddr); - hinic_hwif_write_reg(hwif, addr, val); - - addr = HINIC_CSR_API_CMD_CHAIN_HEAD_LO_ADDR(chain->chain_type); - val = lower_32_bits(chain->head_cell_paddr); - hinic_hwif_write_reg(hwif, addr, val); -} - -/** - * api_cmd_chain_hw_clean - clean the HW - * @chain: the API CMD specific chain - **/ -static void api_cmd_chain_hw_clean(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - u32 addr, ctrl; - - addr = HINIC_CSR_API_CMD_CHAIN_CTRL_ADDR(chain->chain_type); - - ctrl = hinic_hwif_read_reg(hwif, addr); - ctrl = HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, RESTART_WB_STAT) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, XOR_ERR) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, AEQE_EN) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, XOR_CHK_EN) & - HINIC_API_CMD_CHAIN_CTRL_CLEAR(ctrl, CELL_SIZE); - - hinic_hwif_write_reg(hwif, addr, ctrl); -} - -/** - * api_cmd_chain_hw_init - initialize the chain in the HW - * @chain: the API CMD specific chain to initialize in HW - * - * Return 0 - Success, negative - Failure - **/ -static int api_cmd_chain_hw_init(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - int err; - - api_cmd_chain_hw_clean(chain); - - api_cmd_set_status_addr(chain); - - err = api_cmd_hw_restart(chain); - if (err) { - dev_err(&pdev->dev, "Failed to restart API CMD HW\n"); - return err; - } - - api_cmd_ctrl_init(chain); - api_cmd_set_num_cells(chain); - api_cmd_head_init(chain); - return 0; -} - -/** - * free_cmd_buf - free the dma buffer of API CMD command - * @chain: the API CMD specific chain of the cmd - * @cell_idx: the cell index of the cmd - **/ -static void free_cmd_buf(struct hinic_api_cmd_chain *chain, int cell_idx) -{ - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - - cell_ctxt = &chain->cell_ctxt[cell_idx]; - - dma_free_coherent(&pdev->dev, API_CMD_BUF_SIZE, - cell_ctxt->api_cmd_vaddr, - cell_ctxt->api_cmd_paddr); -} - -/** - * alloc_cmd_buf - allocate a dma buffer for API CMD command - * @chain: the API CMD specific chain for the cmd - * @cell: the cell in the HW for the cmd - * @cell_idx: the index of the cell - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_cmd_buf(struct hinic_api_cmd_chain *chain, - struct hinic_api_cmd_cell *cell, int cell_idx) -{ - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - dma_addr_t cmd_paddr; - u8 *cmd_vaddr; - int err = 0; - - cmd_vaddr = dma_zalloc_coherent(&pdev->dev, API_CMD_BUF_SIZE, - &cmd_paddr, GFP_KERNEL); - if (!cmd_vaddr) { - dev_err(&pdev->dev, "Failed to allocate API CMD DMA memory\n"); - return -ENOMEM; - } - - cell_ctxt = &chain->cell_ctxt[cell_idx]; - - cell_ctxt->api_cmd_vaddr = cmd_vaddr; - cell_ctxt->api_cmd_paddr = cmd_paddr; - - /* set the cmd DMA address in the cell */ - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - /* The data in the HW should be in Big Endian Format */ - cell->write.hw_cmd_paddr = cpu_to_be64(cmd_paddr); - break; - - default: - dev_err(&pdev->dev, "Unsupported API CMD chain type\n"); - free_cmd_buf(chain, cell_idx); - err = -EINVAL; - break; - } - - return err; -} - -/** - * api_cmd_create_cell - create API CMD cell for specific chain - * @chain: the API CMD specific chain to create its cell - * @cell_idx: the index of the cell to create - * @pre_node: previous cell - * @node_vaddr: the returned virt addr of the cell - * - * Return 0 - Success, negative - Failure - **/ -static int api_cmd_create_cell(struct hinic_api_cmd_chain *chain, - int cell_idx, - struct hinic_api_cmd_cell *pre_node, - struct hinic_api_cmd_cell **node_vaddr) -{ - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_api_cmd_cell *node; - dma_addr_t node_paddr; - int err; - - node = dma_zalloc_coherent(&pdev->dev, chain->cell_size, - &node_paddr, GFP_KERNEL); - if (!node) { - dev_err(&pdev->dev, "Failed to allocate dma API CMD cell\n"); - return -ENOMEM; - } - - node->read.hw_wb_resp_paddr = 0; - - cell_ctxt = &chain->cell_ctxt[cell_idx]; - cell_ctxt->cell_vaddr = node; - cell_ctxt->cell_paddr = node_paddr; - - if (!pre_node) { - chain->head_cell_paddr = node_paddr; - chain->head_node = node; - } else { - /* The data in the HW should be in Big Endian Format */ - pre_node->next_cell_paddr = cpu_to_be64(node_paddr); - } - - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - err = alloc_cmd_buf(chain, node, cell_idx); - if (err) { - dev_err(&pdev->dev, "Failed to allocate cmd buffer\n"); - goto err_alloc_cmd_buf; - } - break; - - default: - dev_err(&pdev->dev, "Unsupported API CMD chain type\n"); - err = -EINVAL; - goto err_alloc_cmd_buf; - } - - *node_vaddr = node; - return 0; - -err_alloc_cmd_buf: - dma_free_coherent(&pdev->dev, chain->cell_size, node, node_paddr); - return err; -} - -/** - * api_cmd_destroy_cell - destroy API CMD cell of specific chain - * @chain: the API CMD specific chain to destroy its cell - * @cell_idx: the cell to destroy - **/ -static void api_cmd_destroy_cell(struct hinic_api_cmd_chain *chain, - int cell_idx) -{ - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_api_cmd_cell *node; - dma_addr_t node_paddr; - size_t node_size; - - cell_ctxt = &chain->cell_ctxt[cell_idx]; - - node = cell_ctxt->cell_vaddr; - node_paddr = cell_ctxt->cell_paddr; - node_size = chain->cell_size; - - if (cell_ctxt->api_cmd_vaddr) { - switch (chain->chain_type) { - case HINIC_API_CMD_WRITE_TO_MGMT_CPU: - free_cmd_buf(chain, cell_idx); - break; - default: - dev_err(&pdev->dev, "Unsupported API CMD chain type\n"); - break; - } - - dma_free_coherent(&pdev->dev, node_size, node, - node_paddr); - } -} - -/** - * api_cmd_destroy_cells - destroy API CMD cells of specific chain - * @chain: the API CMD specific chain to destroy its cells - * @num_cells: number of cells to destroy - **/ -static void api_cmd_destroy_cells(struct hinic_api_cmd_chain *chain, - int num_cells) -{ - int cell_idx; - - for (cell_idx = 0; cell_idx < num_cells; cell_idx++) - api_cmd_destroy_cell(chain, cell_idx); -} - -/** - * api_cmd_create_cells - create API CMD cells for specific chain - * @chain: the API CMD specific chain - * - * Return 0 - Success, negative - Failure - **/ -static int api_cmd_create_cells(struct hinic_api_cmd_chain *chain) -{ - struct hinic_api_cmd_cell *node = NULL, *pre_node = NULL; - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - int err, cell_idx; - - for (cell_idx = 0; cell_idx < chain->num_cells; cell_idx++) { - err = api_cmd_create_cell(chain, cell_idx, pre_node, &node); - if (err) { - dev_err(&pdev->dev, "Failed to create API CMD cell\n"); - goto err_create_cell; - } - - pre_node = node; - } - - /* set the Final node to point on the start */ - node->next_cell_paddr = cpu_to_be64(chain->head_cell_paddr); - - /* set the current node to be the head */ - chain->curr_node = chain->head_node; - return 0; - -err_create_cell: - api_cmd_destroy_cells(chain, cell_idx); - return err; -} - -/** - * api_chain_init - initialize API CMD specific chain - * @chain: the API CMD specific chain to initialize - * @attr: attributes to set in the chain - * - * Return 0 - Success, negative - Failure - **/ -static int api_chain_init(struct hinic_api_cmd_chain *chain, - struct hinic_api_cmd_chain_attr *attr) -{ - struct hinic_hwif *hwif = attr->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t cell_ctxt_size; - - chain->hwif = hwif; - chain->chain_type = attr->chain_type; - chain->num_cells = attr->num_cells; - chain->cell_size = attr->cell_size; - - chain->prod_idx = 0; - chain->cons_idx = 0; - - sema_init(&chain->sem, 1); - - cell_ctxt_size = chain->num_cells * sizeof(*chain->cell_ctxt); - chain->cell_ctxt = devm_kzalloc(&pdev->dev, cell_ctxt_size, GFP_KERNEL); - if (!chain->cell_ctxt) - return -ENOMEM; - - chain->wb_status = dma_zalloc_coherent(&pdev->dev, - sizeof(*chain->wb_status), - &chain->wb_status_paddr, - GFP_KERNEL); - if (!chain->wb_status) { - dev_err(&pdev->dev, "Failed to allocate DMA wb status\n"); - return -ENOMEM; - } - - return 0; -} - -/** - * api_chain_free - free API CMD specific chain - * @chain: the API CMD specific chain to free - **/ -static void api_chain_free(struct hinic_api_cmd_chain *chain) -{ - struct hinic_hwif *hwif = chain->hwif; - struct pci_dev *pdev = hwif->pdev; - - dma_free_coherent(&pdev->dev, sizeof(*chain->wb_status), - chain->wb_status, chain->wb_status_paddr); -} - -/** - * api_cmd_create_chain - create API CMD specific chain - * @attr: attributes to set the chain - * - * Return the created chain - **/ -static struct hinic_api_cmd_chain * - api_cmd_create_chain(struct hinic_api_cmd_chain_attr *attr) -{ - struct hinic_hwif *hwif = attr->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_api_cmd_chain *chain; - int err; - - if (attr->num_cells & (attr->num_cells - 1)) { - dev_err(&pdev->dev, "Invalid number of cells, must be power of 2\n"); - return ERR_PTR(-EINVAL); - } - - chain = devm_kzalloc(&pdev->dev, sizeof(*chain), GFP_KERNEL); - if (!chain) - return ERR_PTR(-ENOMEM); - - err = api_chain_init(chain, attr); - if (err) { - dev_err(&pdev->dev, "Failed to initialize chain\n"); - return ERR_PTR(err); - } - - err = api_cmd_create_cells(chain); - if (err) { - dev_err(&pdev->dev, "Failed to create cells for API CMD chain\n"); - goto err_create_cells; - } - - err = api_cmd_chain_hw_init(chain); - if (err) { - dev_err(&pdev->dev, "Failed to initialize chain HW\n"); - goto err_chain_hw_init; - } - - return chain; - -err_chain_hw_init: - api_cmd_destroy_cells(chain, chain->num_cells); - -err_create_cells: - api_chain_free(chain); - return ERR_PTR(err); -} - -/** - * api_cmd_destroy_chain - destroy API CMD specific chain - * @chain: the API CMD specific chain to destroy - **/ -static void api_cmd_destroy_chain(struct hinic_api_cmd_chain *chain) -{ - api_cmd_chain_hw_clean(chain); - api_cmd_destroy_cells(chain, chain->num_cells); - api_chain_free(chain); -} - -/** - * hinic_api_cmd_init - Initialize all the API CMD chains - * @chain: the API CMD chains that are initialized - * @hwif: the hardware interface of a pci function device - * - * Return 0 - Success, negative - Failure - **/ -int hinic_api_cmd_init(struct hinic_api_cmd_chain **chain, - struct hinic_hwif *hwif) -{ - enum hinic_api_cmd_chain_type type, chain_type; - struct hinic_api_cmd_chain_attr attr; - struct pci_dev *pdev = hwif->pdev; - size_t hw_cell_sz; - int err; - - hw_cell_sz = sizeof(struct hinic_api_cmd_cell); - - attr.hwif = hwif; - attr.num_cells = API_CHAIN_NUM_CELLS; - attr.cell_size = API_CMD_CELL_SIZE(hw_cell_sz); - - chain_type = HINIC_API_CMD_WRITE_TO_MGMT_CPU; - for ( ; chain_type < HINIC_API_CMD_MAX; chain_type++) { - attr.chain_type = chain_type; - - if (chain_type != HINIC_API_CMD_WRITE_TO_MGMT_CPU) - continue; - - chain[chain_type] = api_cmd_create_chain(&attr); - if (IS_ERR(chain[chain_type])) { - dev_err(&pdev->dev, "Failed to create chain %d\n", - chain_type); - err = PTR_ERR(chain[chain_type]); - goto err_create_chain; - } - } - - return 0; - -err_create_chain: - type = HINIC_API_CMD_WRITE_TO_MGMT_CPU; - for ( ; type < chain_type; type++) { - if (type != HINIC_API_CMD_WRITE_TO_MGMT_CPU) - continue; - - api_cmd_destroy_chain(chain[type]); - } - - return err; -} - -/** - * hinic_api_cmd_free - free the API CMD chains - * @chain: the API CMD chains that are freed - **/ -void hinic_api_cmd_free(struct hinic_api_cmd_chain **chain) -{ - enum hinic_api_cmd_chain_type chain_type; - - chain_type = HINIC_API_CMD_WRITE_TO_MGMT_CPU; - for ( ; chain_type < HINIC_API_CMD_MAX; chain_type++) { - if (chain_type != HINIC_API_CMD_WRITE_TO_MGMT_CPU) - continue; - - api_cmd_destroy_chain(chain[chain_type]); - } -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.h deleted file mode 100644 index 31b94d5..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_api_cmd.h +++ /dev/null @@ -1,208 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_API_CMD_H -#define HINIC_HW_API_CMD_H - -#include <linux/types.h> -#include <linux/semaphore.h> - -#include "hinic_hw_if.h" - -#define HINIC_API_CMD_PI_IDX_SHIFT 0 - -#define HINIC_API_CMD_PI_IDX_MASK 0xFFFFFF - -#define HINIC_API_CMD_PI_SET(val, member) \ - (((u32)(val) & HINIC_API_CMD_PI_##member##_MASK) << \ - HINIC_API_CMD_PI_##member##_SHIFT) - -#define HINIC_API_CMD_PI_CLEAR(val, member) \ - ((val) & (~(HINIC_API_CMD_PI_##member##_MASK \ - << HINIC_API_CMD_PI_##member##_SHIFT))) - -#define HINIC_API_CMD_CHAIN_REQ_RESTART_SHIFT 1 - -#define HINIC_API_CMD_CHAIN_REQ_RESTART_MASK 0x1 - -#define HINIC_API_CMD_CHAIN_REQ_SET(val, member) \ - (((u32)(val) & HINIC_API_CMD_CHAIN_REQ_##member##_MASK) << \ - HINIC_API_CMD_CHAIN_REQ_##member##_SHIFT) - -#define HINIC_API_CMD_CHAIN_REQ_GET(val, member) \ - (((val) >> HINIC_API_CMD_CHAIN_REQ_##member##_SHIFT) & \ - HINIC_API_CMD_CHAIN_REQ_##member##_MASK) - -#define HINIC_API_CMD_CHAIN_REQ_CLEAR(val, member) \ - ((val) & (~(HINIC_API_CMD_CHAIN_REQ_##member##_MASK \ - << HINIC_API_CMD_CHAIN_REQ_##member##_SHIFT))) - -#define HINIC_API_CMD_CHAIN_CTRL_RESTART_WB_STAT_SHIFT 1 -#define HINIC_API_CMD_CHAIN_CTRL_XOR_ERR_SHIFT 2 -#define HINIC_API_CMD_CHAIN_CTRL_AEQE_EN_SHIFT 4 -#define HINIC_API_CMD_CHAIN_CTRL_AEQ_ID_SHIFT 8 -#define HINIC_API_CMD_CHAIN_CTRL_XOR_CHK_EN_SHIFT 28 -#define HINIC_API_CMD_CHAIN_CTRL_CELL_SIZE_SHIFT 30 - -#define HINIC_API_CMD_CHAIN_CTRL_RESTART_WB_STAT_MASK 0x1 -#define HINIC_API_CMD_CHAIN_CTRL_XOR_ERR_MASK 0x1 -#define HINIC_API_CMD_CHAIN_CTRL_AEQE_EN_MASK 0x1 -#define HINIC_API_CMD_CHAIN_CTRL_AEQ_ID_MASK 0x3 -#define HINIC_API_CMD_CHAIN_CTRL_XOR_CHK_EN_MASK 0x3 -#define HINIC_API_CMD_CHAIN_CTRL_CELL_SIZE_MASK 0x3 - -#define HINIC_API_CMD_CHAIN_CTRL_SET(val, member) \ - (((u32)(val) & HINIC_API_CMD_CHAIN_CTRL_##member##_MASK) << \ - HINIC_API_CMD_CHAIN_CTRL_##member##_SHIFT) - -#define HINIC_API_CMD_CHAIN_CTRL_CLEAR(val, member) \ - ((val) & (~(HINIC_API_CMD_CHAIN_CTRL_##member##_MASK \ - << HINIC_API_CMD_CHAIN_CTRL_##member##_SHIFT))) - -#define HINIC_API_CMD_CELL_CTRL_DATA_SZ_SHIFT 0 -#define HINIC_API_CMD_CELL_CTRL_RD_DMA_ATTR_SHIFT 16 -#define HINIC_API_CMD_CELL_CTRL_WR_DMA_ATTR_SHIFT 24 -#define HINIC_API_CMD_CELL_CTRL_XOR_CHKSUM_SHIFT 56 - -#define HINIC_API_CMD_CELL_CTRL_DATA_SZ_MASK 0x3F -#define HINIC_API_CMD_CELL_CTRL_RD_DMA_ATTR_MASK 0x3F -#define HINIC_API_CMD_CELL_CTRL_WR_DMA_ATTR_MASK 0x3F -#define HINIC_API_CMD_CELL_CTRL_XOR_CHKSUM_MASK 0xFF - -#define HINIC_API_CMD_CELL_CTRL_SET(val, member) \ - ((((u64)val) & HINIC_API_CMD_CELL_CTRL_##member##_MASK) << \ - HINIC_API_CMD_CELL_CTRL_##member##_SHIFT) - -#define HINIC_API_CMD_DESC_API_TYPE_SHIFT 0 -#define HINIC_API_CMD_DESC_RD_WR_SHIFT 1 -#define HINIC_API_CMD_DESC_MGMT_BYPASS_SHIFT 2 -#define HINIC_API_CMD_DESC_DEST_SHIFT 32 -#define HINIC_API_CMD_DESC_SIZE_SHIFT 40 -#define HINIC_API_CMD_DESC_XOR_CHKSUM_SHIFT 56 - -#define HINIC_API_CMD_DESC_API_TYPE_MASK 0x1 -#define HINIC_API_CMD_DESC_RD_WR_MASK 0x1 -#define HINIC_API_CMD_DESC_MGMT_BYPASS_MASK 0x1 -#define HINIC_API_CMD_DESC_DEST_MASK 0x1F -#define HINIC_API_CMD_DESC_SIZE_MASK 0x7FF -#define HINIC_API_CMD_DESC_XOR_CHKSUM_MASK 0xFF - -#define HINIC_API_CMD_DESC_SET(val, member) \ - ((((u64)val) & HINIC_API_CMD_DESC_##member##_MASK) << \ - HINIC_API_CMD_DESC_##member##_SHIFT) - -#define HINIC_API_CMD_STATUS_HEADER_CHAIN_ID_SHIFT 16 - -#define HINIC_API_CMD_STATUS_HEADER_CHAIN_ID_MASK 0xFF - -#define HINIC_API_CMD_STATUS_HEADER_GET(val, member) \ - (((val) >> HINIC_API_CMD_STATUS_HEADER_##member##_SHIFT) & \ - HINIC_API_CMD_STATUS_HEADER_##member##_MASK) - -#define HINIC_API_CMD_STATUS_CONS_IDX_SHIFT 0 -#define HINIC_API_CMD_STATUS_CHKSUM_ERR_SHIFT 28 - -#define HINIC_API_CMD_STATUS_CONS_IDX_MASK 0xFFFFFF -#define HINIC_API_CMD_STATUS_CHKSUM_ERR_MASK 0x3 - -#define HINIC_API_CMD_STATUS_GET(val, member) \ - (((val) >> HINIC_API_CMD_STATUS_##member##_SHIFT) & \ - HINIC_API_CMD_STATUS_##member##_MASK) - -enum hinic_api_cmd_chain_type { - HINIC_API_CMD_WRITE_TO_MGMT_CPU = 2, - - HINIC_API_CMD_MAX, -}; - -struct hinic_api_cmd_chain_attr { - struct hinic_hwif *hwif; - enum hinic_api_cmd_chain_type chain_type; - - u32 num_cells; - u16 cell_size; -}; - -struct hinic_api_cmd_status { - u64 header; - u32 status; - u32 rsvd0; - u32 rsvd1; - u32 rsvd2; - u64 rsvd3; -}; - -/* HW struct */ -struct hinic_api_cmd_cell { - u64 ctrl; - - /* address is 64 bit in HW struct */ - u64 next_cell_paddr; - - u64 desc; - - /* HW struct */ - union { - struct { - u64 hw_cmd_paddr; - } write; - - struct { - u64 hw_wb_resp_paddr; - u64 hw_cmd_paddr; - } read; - }; -}; - -struct hinic_api_cmd_cell_ctxt { - dma_addr_t cell_paddr; - struct hinic_api_cmd_cell *cell_vaddr; - - dma_addr_t api_cmd_paddr; - u8 *api_cmd_vaddr; -}; - -struct hinic_api_cmd_chain { - struct hinic_hwif *hwif; - enum hinic_api_cmd_chain_type chain_type; - - u32 num_cells; - u16 cell_size; - - /* HW members in 24 bit format */ - u32 prod_idx; - u32 cons_idx; - - struct semaphore sem; - - struct hinic_api_cmd_cell_ctxt *cell_ctxt; - - dma_addr_t wb_status_paddr; - struct hinic_api_cmd_status *wb_status; - - dma_addr_t head_cell_paddr; - struct hinic_api_cmd_cell *head_node; - struct hinic_api_cmd_cell *curr_node; -}; - -int hinic_api_cmd_write(struct hinic_api_cmd_chain *chain, - enum hinic_node_id dest, u8 *cmd, u16 size); - -int hinic_api_cmd_init(struct hinic_api_cmd_chain **chain, - struct hinic_hwif *hwif); - -void hinic_api_cmd_free(struct hinic_api_cmd_chain **chain); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c deleted file mode 100644 index 4d09ea7..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c +++ /dev/null @@ -1,947 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/slab.h> -#include <linux/vmalloc.h> -#include <linux/spinlock.h> -#include <linux/sizes.h> -#include <linux/atomic.h> -#include <linux/log2.h> -#include <linux/io.h> -#include <linux/completion.h> -#include <linux/err.h> -#include <asm/byteorder.h> -#include <asm/barrier.h> - -#include "hinic_common.h" -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_mgmt.h" -#include "hinic_hw_wqe.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_cmdq.h" -#include "hinic_hw_io.h" -#include "hinic_hw_dev.h" - -#define CMDQ_CEQE_TYPE_SHIFT 0 - -#define CMDQ_CEQE_TYPE_MASK 0x7 - -#define CMDQ_CEQE_GET(val, member) \ - (((val) >> CMDQ_CEQE_##member##_SHIFT) \ - & CMDQ_CEQE_##member##_MASK) - -#define CMDQ_WQE_ERRCODE_VAL_SHIFT 20 - -#define CMDQ_WQE_ERRCODE_VAL_MASK 0xF - -#define CMDQ_WQE_ERRCODE_GET(val, member) \ - (((val) >> CMDQ_WQE_ERRCODE_##member##_SHIFT) \ - & CMDQ_WQE_ERRCODE_##member##_MASK) - -#define CMDQ_DB_PI_OFF(pi) (((u16)LOWER_8_BITS(pi)) << 3) - -#define CMDQ_DB_ADDR(db_base, pi) ((db_base) + CMDQ_DB_PI_OFF(pi)) - -#define CMDQ_WQE_HEADER(wqe) ((struct hinic_cmdq_header *)(wqe)) - -#define CMDQ_WQE_COMPLETED(ctrl_info) \ - HINIC_CMDQ_CTRL_GET(ctrl_info, HW_BUSY_BIT) - -#define FIRST_DATA_TO_WRITE_LAST sizeof(u64) - -#define CMDQ_DB_OFF SZ_2K - -#define CMDQ_WQEBB_SIZE 64 -#define CMDQ_WQE_SIZE 64 -#define CMDQ_DEPTH SZ_4K - -#define CMDQ_WQ_PAGE_SIZE SZ_4K - -#define WQE_LCMD_SIZE 64 -#define WQE_SCMD_SIZE 64 - -#define COMPLETE_LEN 3 - -#define CMDQ_TIMEOUT 1000 - -#define CMDQ_PFN(addr, page_size) ((addr) >> (ilog2(page_size))) - -#define cmdq_to_cmdqs(cmdq) container_of((cmdq) - (cmdq)->cmdq_type, \ - struct hinic_cmdqs, cmdq[0]) - -#define cmdqs_to_func_to_io(cmdqs) container_of(cmdqs, \ - struct hinic_func_to_io, \ - cmdqs) - -enum cmdq_wqe_type { - WQE_LCMD_TYPE = 0, - WQE_SCMD_TYPE = 1, -}; - -enum completion_format { - COMPLETE_DIRECT = 0, - COMPLETE_SGE = 1, -}; - -enum data_format { - DATA_SGE = 0, - DATA_DIRECT = 1, -}; - -enum bufdesc_len { - BUFDESC_LCMD_LEN = 2, /* 16 bytes - 2(8 byte unit) */ - BUFDESC_SCMD_LEN = 3, /* 24 bytes - 3(8 byte unit) */ -}; - -enum ctrl_sect_len { - CTRL_SECT_LEN = 1, /* 4 bytes (ctrl) - 1(8 byte unit) */ - CTRL_DIRECT_SECT_LEN = 2, /* 12 bytes (ctrl + rsvd) - 2(8 byte unit) */ -}; - -enum cmdq_scmd_type { - CMDQ_SET_ARM_CMD = 2, -}; - -enum cmdq_cmd_type { - CMDQ_CMD_SYNC_DIRECT_RESP = 0, - CMDQ_CMD_SYNC_SGE_RESP = 1, -}; - -enum completion_request { - NO_CEQ = 0, - CEQ_SET = 1, -}; - -/** - * hinic_alloc_cmdq_buf - alloc buffer for sending command - * @cmdqs: the cmdqs - * @cmdq_buf: the buffer returned in this struct - * - * Return 0 - Success, negative - Failure - **/ -int hinic_alloc_cmdq_buf(struct hinic_cmdqs *cmdqs, - struct hinic_cmdq_buf *cmdq_buf) -{ - struct hinic_hwif *hwif = cmdqs->hwif; - struct pci_dev *pdev = hwif->pdev; - - cmdq_buf->buf = dma_pool_alloc(cmdqs->cmdq_buf_pool, GFP_KERNEL, - &cmdq_buf->dma_addr); - if (!cmdq_buf->buf) { - dev_err(&pdev->dev, "Failed to allocate cmd from the pool\n"); - return -ENOMEM; - } - - return 0; -} - -/** - * hinic_free_cmdq_buf - free buffer - * @cmdqs: the cmdqs - * @cmdq_buf: the buffer to free that is in this struct - **/ -void hinic_free_cmdq_buf(struct hinic_cmdqs *cmdqs, - struct hinic_cmdq_buf *cmdq_buf) -{ - dma_pool_free(cmdqs->cmdq_buf_pool, cmdq_buf->buf, cmdq_buf->dma_addr); -} - -static unsigned int cmdq_wqe_size_from_bdlen(enum bufdesc_len len) -{ - unsigned int wqe_size = 0; - - switch (len) { - case BUFDESC_LCMD_LEN: - wqe_size = WQE_LCMD_SIZE; - break; - case BUFDESC_SCMD_LEN: - wqe_size = WQE_SCMD_SIZE; - break; - } - - return wqe_size; -} - -static void cmdq_set_sge_completion(struct hinic_cmdq_completion *completion, - struct hinic_cmdq_buf *buf_out) -{ - struct hinic_sge_resp *sge_resp = &completion->sge_resp; - - hinic_set_sge(&sge_resp->sge, buf_out->dma_addr, buf_out->size); -} - -static void cmdq_prepare_wqe_ctrl(struct hinic_cmdq_wqe *wqe, int wrapped, - enum hinic_cmd_ack_type ack_type, - enum hinic_mod_type mod, u8 cmd, u16 prod_idx, - enum completion_format complete_format, - enum data_format data_format, - enum bufdesc_len buf_len) -{ - struct hinic_cmdq_wqe_lcmd *wqe_lcmd; - struct hinic_cmdq_wqe_scmd *wqe_scmd; - enum ctrl_sect_len ctrl_len; - struct hinic_ctrl *ctrl; - u32 saved_data; - - if (data_format == DATA_SGE) { - wqe_lcmd = &wqe->wqe_lcmd; - - wqe_lcmd->status.status_info = 0; - ctrl = &wqe_lcmd->ctrl; - ctrl_len = CTRL_SECT_LEN; - } else { - wqe_scmd = &wqe->direct_wqe.wqe_scmd; - - wqe_scmd->status.status_info = 0; - ctrl = &wqe_scmd->ctrl; - ctrl_len = CTRL_DIRECT_SECT_LEN; - } - - ctrl->ctrl_info = HINIC_CMDQ_CTRL_SET(prod_idx, PI) | - HINIC_CMDQ_CTRL_SET(cmd, CMD) | - HINIC_CMDQ_CTRL_SET(mod, MOD) | - HINIC_CMDQ_CTRL_SET(ack_type, ACK_TYPE); - - CMDQ_WQE_HEADER(wqe)->header_info = - HINIC_CMDQ_WQE_HEADER_SET(buf_len, BUFDESC_LEN) | - HINIC_CMDQ_WQE_HEADER_SET(complete_format, COMPLETE_FMT) | - HINIC_CMDQ_WQE_HEADER_SET(data_format, DATA_FMT) | - HINIC_CMDQ_WQE_HEADER_SET(CEQ_SET, COMPLETE_REQ) | - HINIC_CMDQ_WQE_HEADER_SET(COMPLETE_LEN, COMPLETE_SECT_LEN) | - HINIC_CMDQ_WQE_HEADER_SET(ctrl_len, CTRL_LEN) | - HINIC_CMDQ_WQE_HEADER_SET(wrapped, TOGGLED_WRAPPED); - - saved_data = CMDQ_WQE_HEADER(wqe)->saved_data; - saved_data = HINIC_SAVED_DATA_CLEAR(saved_data, ARM); - - if ((cmd == CMDQ_SET_ARM_CMD) && (mod == HINIC_MOD_COMM)) - CMDQ_WQE_HEADER(wqe)->saved_data |= - HINIC_SAVED_DATA_SET(1, ARM); - else - CMDQ_WQE_HEADER(wqe)->saved_data = saved_data; -} - -static void cmdq_set_lcmd_bufdesc(struct hinic_cmdq_wqe_lcmd *wqe_lcmd, - struct hinic_cmdq_buf *buf_in) -{ - hinic_set_sge(&wqe_lcmd->buf_desc.sge, buf_in->dma_addr, buf_in->size); -} - -static void cmdq_set_direct_wqe_data(struct hinic_cmdq_direct_wqe *wqe, - void *buf_in, u32 in_size) -{ - struct hinic_cmdq_wqe_scmd *wqe_scmd = &wqe->wqe_scmd; - - wqe_scmd->buf_desc.buf_len = in_size; - memcpy(wqe_scmd->buf_desc.data, buf_in, in_size); -} - -static void cmdq_set_lcmd_wqe(struct hinic_cmdq_wqe *wqe, - enum cmdq_cmd_type cmd_type, - struct hinic_cmdq_buf *buf_in, - struct hinic_cmdq_buf *buf_out, int wrapped, - enum hinic_cmd_ack_type ack_type, - enum hinic_mod_type mod, u8 cmd, u16 prod_idx) -{ - struct hinic_cmdq_wqe_lcmd *wqe_lcmd = &wqe->wqe_lcmd; - enum completion_format complete_format; - - switch (cmd_type) { - case CMDQ_CMD_SYNC_SGE_RESP: - complete_format = COMPLETE_SGE; - cmdq_set_sge_completion(&wqe_lcmd->completion, buf_out); - break; - case CMDQ_CMD_SYNC_DIRECT_RESP: - complete_format = COMPLETE_DIRECT; - wqe_lcmd->completion.direct_resp = 0; - break; - } - - cmdq_prepare_wqe_ctrl(wqe, wrapped, ack_type, mod, cmd, - prod_idx, complete_format, DATA_SGE, - BUFDESC_LCMD_LEN); - - cmdq_set_lcmd_bufdesc(wqe_lcmd, buf_in); -} - -static void cmdq_set_direct_wqe(struct hinic_cmdq_wqe *wqe, - enum cmdq_cmd_type cmd_type, - void *buf_in, u16 in_size, - struct hinic_cmdq_buf *buf_out, int wrapped, - enum hinic_cmd_ack_type ack_type, - enum hinic_mod_type mod, u8 cmd, u16 prod_idx) -{ - struct hinic_cmdq_direct_wqe *direct_wqe = &wqe->direct_wqe; - enum completion_format complete_format; - struct hinic_cmdq_wqe_scmd *wqe_scmd; - - wqe_scmd = &direct_wqe->wqe_scmd; - - switch (cmd_type) { - case CMDQ_CMD_SYNC_SGE_RESP: - complete_format = COMPLETE_SGE; - cmdq_set_sge_completion(&wqe_scmd->completion, buf_out); - break; - case CMDQ_CMD_SYNC_DIRECT_RESP: - complete_format = COMPLETE_DIRECT; - wqe_scmd->completion.direct_resp = 0; - break; - } - - cmdq_prepare_wqe_ctrl(wqe, wrapped, ack_type, mod, cmd, prod_idx, - complete_format, DATA_DIRECT, BUFDESC_SCMD_LEN); - - cmdq_set_direct_wqe_data(direct_wqe, buf_in, in_size); -} - -static void cmdq_wqe_fill(void *dst, void *src) -{ - memcpy(dst + FIRST_DATA_TO_WRITE_LAST, src + FIRST_DATA_TO_WRITE_LAST, - CMDQ_WQE_SIZE - FIRST_DATA_TO_WRITE_LAST); - - wmb(); /* The first 8 bytes should be written last */ - - *(u64 *)dst = *(u64 *)src; -} - -static void cmdq_fill_db(u32 *db_info, - enum hinic_cmdq_type cmdq_type, u16 prod_idx) -{ - *db_info = HINIC_CMDQ_DB_INFO_SET(UPPER_8_BITS(prod_idx), HI_PROD_IDX) | - HINIC_CMDQ_DB_INFO_SET(HINIC_CTRL_PATH, PATH) | - HINIC_CMDQ_DB_INFO_SET(cmdq_type, CMDQ_TYPE) | - HINIC_CMDQ_DB_INFO_SET(HINIC_DB_CMDQ_TYPE, DB_TYPE); -} - -static void cmdq_set_db(struct hinic_cmdq *cmdq, - enum hinic_cmdq_type cmdq_type, u16 prod_idx) -{ - u32 db_info; - - cmdq_fill_db(&db_info, cmdq_type, prod_idx); - - /* The data that is written to HW should be in Big Endian Format */ - db_info = cpu_to_be32(db_info); - - wmb(); /* write all before the doorbell */ - - writel(db_info, CMDQ_DB_ADDR(cmdq->db_base, prod_idx)); -} - -static int cmdq_sync_cmd_direct_resp(struct hinic_cmdq *cmdq, - enum hinic_mod_type mod, u8 cmd, - struct hinic_cmdq_buf *buf_in, - u64 *resp) -{ - struct hinic_cmdq_wqe *curr_cmdq_wqe, cmdq_wqe; - u16 curr_prod_idx, next_prod_idx; - int errcode, wrapped, num_wqebbs; - struct hinic_wq *wq = cmdq->wq; - struct hinic_hw_wqe *hw_wqe; - struct completion done; - - /* Keep doorbell index correct. bh - for tasklet(ceq). */ - spin_lock_bh(&cmdq->cmdq_lock); - - /* WQE_SIZE = WQEBB_SIZE, we will get the wq element and not shadow*/ - hw_wqe = hinic_get_wqe(wq, WQE_LCMD_SIZE, &curr_prod_idx); - if (IS_ERR(hw_wqe)) { - spin_unlock_bh(&cmdq->cmdq_lock); - return -EBUSY; - } - - curr_cmdq_wqe = &hw_wqe->cmdq_wqe; - - wrapped = cmdq->wrapped; - - num_wqebbs = ALIGN(WQE_LCMD_SIZE, wq->wqebb_size) / wq->wqebb_size; - next_prod_idx = curr_prod_idx + num_wqebbs; - if (next_prod_idx >= wq->q_depth) { - cmdq->wrapped = !cmdq->wrapped; - next_prod_idx -= wq->q_depth; - } - - cmdq->errcode[curr_prod_idx] = &errcode; - - init_completion(&done); - cmdq->done[curr_prod_idx] = &done; - - cmdq_set_lcmd_wqe(&cmdq_wqe, CMDQ_CMD_SYNC_DIRECT_RESP, buf_in, NULL, - wrapped, HINIC_CMD_ACK_TYPE_CMDQ, mod, cmd, - curr_prod_idx); - - /* The data that is written to HW should be in Big Endian Format */ - hinic_cpu_to_be32(&cmdq_wqe, WQE_LCMD_SIZE); - - /* CMDQ WQE is not shadow, therefore wqe will be written to wq */ - cmdq_wqe_fill(curr_cmdq_wqe, &cmdq_wqe); - - cmdq_set_db(cmdq, HINIC_CMDQ_SYNC, next_prod_idx); - - spin_unlock_bh(&cmdq->cmdq_lock); - - if (!wait_for_completion_timeout(&done, CMDQ_TIMEOUT)) { - spin_lock_bh(&cmdq->cmdq_lock); - - if (cmdq->errcode[curr_prod_idx] == &errcode) - cmdq->errcode[curr_prod_idx] = NULL; - - if (cmdq->done[curr_prod_idx] == &done) - cmdq->done[curr_prod_idx] = NULL; - - spin_unlock_bh(&cmdq->cmdq_lock); - - return -ETIMEDOUT; - } - - smp_rmb(); /* read error code after completion */ - - if (resp) { - struct hinic_cmdq_wqe_lcmd *wqe_lcmd = &curr_cmdq_wqe->wqe_lcmd; - - *resp = cpu_to_be64(wqe_lcmd->completion.direct_resp); - } - - if (errcode != 0) - return -EFAULT; - - return 0; -} - -static int cmdq_set_arm_bit(struct hinic_cmdq *cmdq, void *buf_in, - u16 in_size) -{ - struct hinic_cmdq_wqe *curr_cmdq_wqe, cmdq_wqe; - u16 curr_prod_idx, next_prod_idx; - struct hinic_wq *wq = cmdq->wq; - struct hinic_hw_wqe *hw_wqe; - int wrapped, num_wqebbs; - - /* Keep doorbell index correct */ - spin_lock(&cmdq->cmdq_lock); - - /* WQE_SIZE = WQEBB_SIZE, we will get the wq element and not shadow*/ - hw_wqe = hinic_get_wqe(wq, WQE_SCMD_SIZE, &curr_prod_idx); - if (IS_ERR(hw_wqe)) { - spin_unlock(&cmdq->cmdq_lock); - return -EBUSY; - } - - curr_cmdq_wqe = &hw_wqe->cmdq_wqe; - - wrapped = cmdq->wrapped; - - num_wqebbs = ALIGN(WQE_SCMD_SIZE, wq->wqebb_size) / wq->wqebb_size; - next_prod_idx = curr_prod_idx + num_wqebbs; - if (next_prod_idx >= wq->q_depth) { - cmdq->wrapped = !cmdq->wrapped; - next_prod_idx -= wq->q_depth; - } - - cmdq_set_direct_wqe(&cmdq_wqe, CMDQ_CMD_SYNC_DIRECT_RESP, buf_in, - in_size, NULL, wrapped, HINIC_CMD_ACK_TYPE_CMDQ, - HINIC_MOD_COMM, CMDQ_SET_ARM_CMD, curr_prod_idx); - - /* The data that is written to HW should be in Big Endian Format */ - hinic_cpu_to_be32(&cmdq_wqe, WQE_SCMD_SIZE); - - /* cmdq wqe is not shadow, therefore wqe will be written to wq */ - cmdq_wqe_fill(curr_cmdq_wqe, &cmdq_wqe); - - cmdq_set_db(cmdq, HINIC_CMDQ_SYNC, next_prod_idx); - - spin_unlock(&cmdq->cmdq_lock); - return 0; -} - -static int cmdq_params_valid(struct hinic_cmdq_buf *buf_in) -{ - if (buf_in->size > HINIC_CMDQ_MAX_DATA_SIZE) - return -EINVAL; - - return 0; -} - -/** - * hinic_cmdq_direct_resp - send command with direct data as resp - * @cmdqs: the cmdqs - * @mod: module on the card that will handle the command - * @cmd: the command - * @buf_in: the buffer for the command - * @resp: the response to return - * - * Return 0 - Success, negative - Failure - **/ -int hinic_cmdq_direct_resp(struct hinic_cmdqs *cmdqs, - enum hinic_mod_type mod, u8 cmd, - struct hinic_cmdq_buf *buf_in, u64 *resp) -{ - struct hinic_hwif *hwif = cmdqs->hwif; - struct pci_dev *pdev = hwif->pdev; - int err; - - err = cmdq_params_valid(buf_in); - if (err) { - dev_err(&pdev->dev, "Invalid CMDQ parameters\n"); - return err; - } - - return cmdq_sync_cmd_direct_resp(&cmdqs->cmdq[HINIC_CMDQ_SYNC], - mod, cmd, buf_in, resp); -} - -/** - * hinic_set_arm_bit - set arm bit for enable interrupt again - * @cmdqs: the cmdqs - * @q_type: type of queue to set the arm bit for - * @q_id: the queue number - * - * Return 0 - Success, negative - Failure - **/ -int hinic_set_arm_bit(struct hinic_cmdqs *cmdqs, - enum hinic_set_arm_qtype q_type, u32 q_id) -{ - struct hinic_cmdq *cmdq = &cmdqs->cmdq[HINIC_CMDQ_SYNC]; - struct hinic_hwif *hwif = cmdqs->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_cmdq_arm_bit arm_bit; - int err; - - arm_bit.q_type = q_type; - arm_bit.q_id = q_id; - - err = cmdq_set_arm_bit(cmdq, &arm_bit, sizeof(arm_bit)); - if (err) { - dev_err(&pdev->dev, "Failed to set arm for qid %d\n", q_id); - return err; - } - - return 0; -} - -static void clear_wqe_complete_bit(struct hinic_cmdq *cmdq, - struct hinic_cmdq_wqe *wqe) -{ - u32 header_info = be32_to_cpu(CMDQ_WQE_HEADER(wqe)->header_info); - unsigned int bufdesc_len, wqe_size; - struct hinic_ctrl *ctrl; - - bufdesc_len = HINIC_CMDQ_WQE_HEADER_GET(header_info, BUFDESC_LEN); - wqe_size = cmdq_wqe_size_from_bdlen(bufdesc_len); - if (wqe_size == WQE_LCMD_SIZE) { - struct hinic_cmdq_wqe_lcmd *wqe_lcmd = &wqe->wqe_lcmd; - - ctrl = &wqe_lcmd->ctrl; - } else { - struct hinic_cmdq_direct_wqe *direct_wqe = &wqe->direct_wqe; - struct hinic_cmdq_wqe_scmd *wqe_scmd; - - wqe_scmd = &direct_wqe->wqe_scmd; - ctrl = &wqe_scmd->ctrl; - } - - /* clear HW busy bit */ - ctrl->ctrl_info = 0; - - wmb(); /* verify wqe is clear */ -} - -/** - * cmdq_arm_ceq_handler - cmdq completion event handler for arm command - * @cmdq: the cmdq of the arm command - * @wqe: the wqe of the arm command - * - * Return 0 - Success, negative - Failure - **/ -static int cmdq_arm_ceq_handler(struct hinic_cmdq *cmdq, - struct hinic_cmdq_wqe *wqe) -{ - struct hinic_cmdq_direct_wqe *direct_wqe = &wqe->direct_wqe; - struct hinic_cmdq_wqe_scmd *wqe_scmd; - struct hinic_ctrl *ctrl; - u32 ctrl_info; - - wqe_scmd = &direct_wqe->wqe_scmd; - ctrl = &wqe_scmd->ctrl; - ctrl_info = be32_to_cpu(ctrl->ctrl_info); - - /* HW should toggle the HW BUSY BIT */ - if (!CMDQ_WQE_COMPLETED(ctrl_info)) - return -EBUSY; - - clear_wqe_complete_bit(cmdq, wqe); - - hinic_put_wqe(cmdq->wq, WQE_SCMD_SIZE); - return 0; -} - -static void cmdq_update_errcode(struct hinic_cmdq *cmdq, u16 prod_idx, - int errcode) -{ - if (cmdq->errcode[prod_idx]) - *cmdq->errcode[prod_idx] = errcode; -} - -/** - * cmdq_arm_ceq_handler - cmdq completion event handler for sync command - * @cmdq: the cmdq of the command - * @cons_idx: the consumer index to update the error code for - * @errcode: the error code - **/ -static void cmdq_sync_cmd_handler(struct hinic_cmdq *cmdq, u16 cons_idx, - int errcode) -{ - u16 prod_idx = cons_idx; - - spin_lock(&cmdq->cmdq_lock); - cmdq_update_errcode(cmdq, prod_idx, errcode); - - wmb(); /* write all before update for the command request */ - - if (cmdq->done[prod_idx]) - complete(cmdq->done[prod_idx]); - spin_unlock(&cmdq->cmdq_lock); -} - -static int cmdq_cmd_ceq_handler(struct hinic_cmdq *cmdq, u16 ci, - struct hinic_cmdq_wqe *cmdq_wqe) -{ - struct hinic_cmdq_wqe_lcmd *wqe_lcmd = &cmdq_wqe->wqe_lcmd; - struct hinic_status *status = &wqe_lcmd->status; - struct hinic_ctrl *ctrl = &wqe_lcmd->ctrl; - int errcode; - - if (!CMDQ_WQE_COMPLETED(be32_to_cpu(ctrl->ctrl_info))) - return -EBUSY; - - errcode = CMDQ_WQE_ERRCODE_GET(be32_to_cpu(status->status_info), VAL); - - cmdq_sync_cmd_handler(cmdq, ci, errcode); - - clear_wqe_complete_bit(cmdq, cmdq_wqe); - hinic_put_wqe(cmdq->wq, WQE_LCMD_SIZE); - return 0; -} - -/** - * cmdq_ceq_handler - cmdq completion event handler - * @handle: private data for the handler(cmdqs) - * @ceqe_data: ceq element data - **/ -static void cmdq_ceq_handler(void *handle, u32 ceqe_data) -{ - enum hinic_cmdq_type cmdq_type = CMDQ_CEQE_GET(ceqe_data, TYPE); - struct hinic_cmdqs *cmdqs = (struct hinic_cmdqs *)handle; - struct hinic_cmdq *cmdq = &cmdqs->cmdq[cmdq_type]; - struct hinic_cmdq_header *header; - struct hinic_hw_wqe *hw_wqe; - int err, set_arm = 0; - u32 saved_data; - u16 ci; - - /* Read the smallest wqe size for getting wqe size */ - while ((hw_wqe = hinic_read_wqe(cmdq->wq, WQE_SCMD_SIZE, &ci))) { - if (IS_ERR(hw_wqe)) - break; - - header = CMDQ_WQE_HEADER(&hw_wqe->cmdq_wqe); - saved_data = be32_to_cpu(header->saved_data); - - if (HINIC_SAVED_DATA_GET(saved_data, ARM)) { - /* arm_bit was set until here */ - set_arm = 0; - - if (cmdq_arm_ceq_handler(cmdq, &hw_wqe->cmdq_wqe)) - break; - } else { - set_arm = 1; - - hw_wqe = hinic_read_wqe(cmdq->wq, WQE_LCMD_SIZE, &ci); - if (IS_ERR(hw_wqe)) - break; - - if (cmdq_cmd_ceq_handler(cmdq, ci, &hw_wqe->cmdq_wqe)) - break; - } - } - - if (set_arm) { - struct hinic_hwif *hwif = cmdqs->hwif; - struct pci_dev *pdev = hwif->pdev; - - err = hinic_set_arm_bit(cmdqs, HINIC_SET_ARM_CMDQ, cmdq_type); - if (err) - dev_err(&pdev->dev, "Failed to set arm for CMDQ\n"); - } -} - -/** - * cmdq_init_queue_ctxt - init the queue ctxt of a cmdq - * @cmdq_ctxt: cmdq ctxt to initialize - * @cmdq: the cmdq - * @cmdq_pages: the memory of the queue - **/ -static void cmdq_init_queue_ctxt(struct hinic_cmdq_ctxt *cmdq_ctxt, - struct hinic_cmdq *cmdq, - struct hinic_cmdq_pages *cmdq_pages) -{ - struct hinic_cmdq_ctxt_info *ctxt_info = &cmdq_ctxt->ctxt_info; - u64 wq_first_page_paddr, cmdq_first_block_paddr, pfn; - struct hinic_cmdqs *cmdqs = cmdq_to_cmdqs(cmdq); - struct hinic_wq *wq = cmdq->wq; - - /* The data in the HW is in Big Endian Format */ - wq_first_page_paddr = be64_to_cpu(*wq->block_vaddr); - - pfn = CMDQ_PFN(wq_first_page_paddr, wq->wq_page_size); - - ctxt_info->curr_wqe_page_pfn = - HINIC_CMDQ_CTXT_PAGE_INFO_SET(pfn, CURR_WQE_PAGE_PFN) | - HINIC_CMDQ_CTXT_PAGE_INFO_SET(HINIC_CEQ_ID_CMDQ, EQ_ID) | - HINIC_CMDQ_CTXT_PAGE_INFO_SET(1, CEQ_ARM) | - HINIC_CMDQ_CTXT_PAGE_INFO_SET(1, CEQ_EN) | - HINIC_CMDQ_CTXT_PAGE_INFO_SET(cmdq->wrapped, WRAPPED); - - /* block PFN - Read Modify Write */ - cmdq_first_block_paddr = cmdq_pages->page_paddr; - - pfn = CMDQ_PFN(cmdq_first_block_paddr, wq->wq_page_size); - - ctxt_info->wq_block_pfn = - HINIC_CMDQ_CTXT_BLOCK_INFO_SET(pfn, WQ_BLOCK_PFN) | - HINIC_CMDQ_CTXT_BLOCK_INFO_SET(atomic_read(&wq->cons_idx), CI); - - cmdq_ctxt->func_idx = HINIC_HWIF_FUNC_IDX(cmdqs->hwif); - cmdq_ctxt->cmdq_type = cmdq->cmdq_type; -} - -/** - * init_cmdq - initialize cmdq - * @cmdq: the cmdq - * @wq: the wq attaced to the cmdq - * @q_type: the cmdq type of the cmdq - * @db_area: doorbell area for the cmdq - * - * Return 0 - Success, negative - Failure - **/ -static int init_cmdq(struct hinic_cmdq *cmdq, struct hinic_wq *wq, - enum hinic_cmdq_type q_type, void __iomem *db_area) -{ - int err; - - cmdq->wq = wq; - cmdq->cmdq_type = q_type; - cmdq->wrapped = 1; - - spin_lock_init(&cmdq->cmdq_lock); - - cmdq->done = vzalloc(array_size(sizeof(*cmdq->done), wq->q_depth)); - if (!cmdq->done) - return -ENOMEM; - - cmdq->errcode = vzalloc(array_size(sizeof(*cmdq->errcode), - wq->q_depth)); - if (!cmdq->errcode) { - err = -ENOMEM; - goto err_errcode; - } - - cmdq->db_base = db_area + CMDQ_DB_OFF; - return 0; - -err_errcode: - vfree(cmdq->done); - return err; -} - -/** - * free_cmdq - Free cmdq - * @cmdq: the cmdq to free - **/ -static void free_cmdq(struct hinic_cmdq *cmdq) -{ - vfree(cmdq->errcode); - vfree(cmdq->done); -} - -/** - * init_cmdqs_ctxt - write the cmdq ctxt to HW after init all cmdq - * @hwdev: the NIC HW device - * @cmdqs: cmdqs to write the ctxts for - * &db_area: db_area for all the cmdqs - * - * Return 0 - Success, negative - Failure - **/ -static int init_cmdqs_ctxt(struct hinic_hwdev *hwdev, - struct hinic_cmdqs *cmdqs, void __iomem **db_area) -{ - struct hinic_hwif *hwif = hwdev->hwif; - enum hinic_cmdq_type type, cmdq_type; - struct hinic_cmdq_ctxt *cmdq_ctxts; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - size_t cmdq_ctxts_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI function type\n"); - return -EINVAL; - } - - cmdq_ctxts_size = HINIC_MAX_CMDQ_TYPES * sizeof(*cmdq_ctxts); - cmdq_ctxts = devm_kzalloc(&pdev->dev, cmdq_ctxts_size, GFP_KERNEL); - if (!cmdq_ctxts) - return -ENOMEM; - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - cmdq_type = HINIC_CMDQ_SYNC; - for (; cmdq_type < HINIC_MAX_CMDQ_TYPES; cmdq_type++) { - err = init_cmdq(&cmdqs->cmdq[cmdq_type], - &cmdqs->saved_wqs[cmdq_type], cmdq_type, - db_area[cmdq_type]); - if (err) { - dev_err(&pdev->dev, "Failed to initialize cmdq\n"); - goto err_init_cmdq; - } - - cmdq_init_queue_ctxt(&cmdq_ctxts[cmdq_type], - &cmdqs->cmdq[cmdq_type], - &cmdqs->cmdq_pages); - } - - /* Write the CMDQ ctxts */ - cmdq_type = HINIC_CMDQ_SYNC; - for (; cmdq_type < HINIC_MAX_CMDQ_TYPES; cmdq_type++) { - err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM, - HINIC_COMM_CMD_CMDQ_CTXT_SET, - &cmdq_ctxts[cmdq_type], - sizeof(cmdq_ctxts[cmdq_type]), - NULL, NULL, HINIC_MGMT_MSG_SYNC); - if (err) { - dev_err(&pdev->dev, "Failed to set CMDQ CTXT type = %d\n", - cmdq_type); - goto err_write_cmdq_ctxt; - } - } - - devm_kfree(&pdev->dev, cmdq_ctxts); - return 0; - -err_write_cmdq_ctxt: - cmdq_type = HINIC_MAX_CMDQ_TYPES; - -err_init_cmdq: - for (type = HINIC_CMDQ_SYNC; type < cmdq_type; type++) - free_cmdq(&cmdqs->cmdq[type]); - - devm_kfree(&pdev->dev, cmdq_ctxts); - return err; -} - -/** - * hinic_init_cmdqs - init all cmdqs - * @cmdqs: cmdqs to init - * @hwif: HW interface for accessing cmdqs - * @db_area: doorbell areas for all the cmdqs - * - * Return 0 - Success, negative - Failure - **/ -int hinic_init_cmdqs(struct hinic_cmdqs *cmdqs, struct hinic_hwif *hwif, - void __iomem **db_area) -{ - struct hinic_func_to_io *func_to_io = cmdqs_to_func_to_io(cmdqs); - struct pci_dev *pdev = hwif->pdev; - struct hinic_hwdev *hwdev; - size_t saved_wqs_size; - u16 max_wqe_size; - int err; - - cmdqs->hwif = hwif; - cmdqs->cmdq_buf_pool = dma_pool_create("hinic_cmdq", &pdev->dev, - HINIC_CMDQ_BUF_SIZE, - HINIC_CMDQ_BUF_SIZE, 0); - if (!cmdqs->cmdq_buf_pool) - return -ENOMEM; - - saved_wqs_size = HINIC_MAX_CMDQ_TYPES * sizeof(struct hinic_wq); - cmdqs->saved_wqs = devm_kzalloc(&pdev->dev, saved_wqs_size, GFP_KERNEL); - if (!cmdqs->saved_wqs) { - err = -ENOMEM; - goto err_saved_wqs; - } - - max_wqe_size = WQE_LCMD_SIZE; - err = hinic_wqs_cmdq_alloc(&cmdqs->cmdq_pages, cmdqs->saved_wqs, hwif, - HINIC_MAX_CMDQ_TYPES, CMDQ_WQEBB_SIZE, - CMDQ_WQ_PAGE_SIZE, CMDQ_DEPTH, max_wqe_size); - if (err) { - dev_err(&pdev->dev, "Failed to allocate CMDQ wqs\n"); - goto err_cmdq_wqs; - } - - hwdev = container_of(func_to_io, struct hinic_hwdev, func_to_io); - err = init_cmdqs_ctxt(hwdev, cmdqs, db_area); - if (err) { - dev_err(&pdev->dev, "Failed to write cmdq ctxt\n"); - goto err_cmdq_ctxt; - } - - hinic_ceq_register_cb(&func_to_io->ceqs, HINIC_CEQ_CMDQ, cmdqs, - cmdq_ceq_handler); - return 0; - -err_cmdq_ctxt: - hinic_wqs_cmdq_free(&cmdqs->cmdq_pages, cmdqs->saved_wqs, - HINIC_MAX_CMDQ_TYPES); - -err_cmdq_wqs: - devm_kfree(&pdev->dev, cmdqs->saved_wqs); - -err_saved_wqs: - dma_pool_destroy(cmdqs->cmdq_buf_pool); - return err; -} - -/** - * hinic_free_cmdqs - free all cmdqs - * @cmdqs: cmdqs to free - **/ -void hinic_free_cmdqs(struct hinic_cmdqs *cmdqs) -{ - struct hinic_func_to_io *func_to_io = cmdqs_to_func_to_io(cmdqs); - struct hinic_hwif *hwif = cmdqs->hwif; - struct pci_dev *pdev = hwif->pdev; - enum hinic_cmdq_type cmdq_type; - - hinic_ceq_unregister_cb(&func_to_io->ceqs, HINIC_CEQ_CMDQ); - - cmdq_type = HINIC_CMDQ_SYNC; - for (; cmdq_type < HINIC_MAX_CMDQ_TYPES; cmdq_type++) - free_cmdq(&cmdqs->cmdq[cmdq_type]); - - hinic_wqs_cmdq_free(&cmdqs->cmdq_pages, cmdqs->saved_wqs, - HINIC_MAX_CMDQ_TYPES); - - devm_kfree(&pdev->dev, cmdqs->saved_wqs); - - dma_pool_destroy(cmdqs->cmdq_buf_pool); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h deleted file mode 100644 index 23f8d39..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.h +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_CMDQ_H -#define HINIC_CMDQ_H - -#include <linux/types.h> -#include <linux/spinlock.h> -#include <linux/completion.h> -#include <linux/pci.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_wq.h" - -#define HINIC_CMDQ_CTXT_CURR_WQE_PAGE_PFN_SHIFT 0 -#define HINIC_CMDQ_CTXT_EQ_ID_SHIFT 56 -#define HINIC_CMDQ_CTXT_CEQ_ARM_SHIFT 61 -#define HINIC_CMDQ_CTXT_CEQ_EN_SHIFT 62 -#define HINIC_CMDQ_CTXT_WRAPPED_SHIFT 63 - -#define HINIC_CMDQ_CTXT_CURR_WQE_PAGE_PFN_MASK 0xFFFFFFFFFFFFF -#define HINIC_CMDQ_CTXT_EQ_ID_MASK 0x1F -#define HINIC_CMDQ_CTXT_CEQ_ARM_MASK 0x1 -#define HINIC_CMDQ_CTXT_CEQ_EN_MASK 0x1 -#define HINIC_CMDQ_CTXT_WRAPPED_MASK 0x1 - -#define HINIC_CMDQ_CTXT_PAGE_INFO_SET(val, member) \ - (((u64)(val) & HINIC_CMDQ_CTXT_##member##_MASK) \ - << HINIC_CMDQ_CTXT_##member##_SHIFT) - -#define HINIC_CMDQ_CTXT_PAGE_INFO_CLEAR(val, member) \ - ((val) & (~((u64)HINIC_CMDQ_CTXT_##member##_MASK \ - << HINIC_CMDQ_CTXT_##member##_SHIFT))) - -#define HINIC_CMDQ_CTXT_WQ_BLOCK_PFN_SHIFT 0 -#define HINIC_CMDQ_CTXT_CI_SHIFT 52 - -#define HINIC_CMDQ_CTXT_WQ_BLOCK_PFN_MASK 0xFFFFFFFFFFFFF -#define HINIC_CMDQ_CTXT_CI_MASK 0xFFF - -#define HINIC_CMDQ_CTXT_BLOCK_INFO_SET(val, member) \ - (((u64)(val) & HINIC_CMDQ_CTXT_##member##_MASK) \ - << HINIC_CMDQ_CTXT_##member##_SHIFT) - -#define HINIC_CMDQ_CTXT_BLOCK_INFO_CLEAR(val, member) \ - ((val) & (~((u64)HINIC_CMDQ_CTXT_##member##_MASK \ - << HINIC_CMDQ_CTXT_##member##_SHIFT))) - -#define HINIC_SAVED_DATA_ARM_SHIFT 31 - -#define HINIC_SAVED_DATA_ARM_MASK 0x1 - -#define HINIC_SAVED_DATA_SET(val, member) \ - (((u32)(val) & HINIC_SAVED_DATA_##member##_MASK) \ - << HINIC_SAVED_DATA_##member##_SHIFT) - -#define HINIC_SAVED_DATA_GET(val, member) \ - (((val) >> HINIC_SAVED_DATA_##member##_SHIFT) \ - & HINIC_SAVED_DATA_##member##_MASK) - -#define HINIC_SAVED_DATA_CLEAR(val, member) \ - ((val) & (~(HINIC_SAVED_DATA_##member##_MASK \ - << HINIC_SAVED_DATA_##member##_SHIFT))) - -#define HINIC_CMDQ_DB_INFO_HI_PROD_IDX_SHIFT 0 -#define HINIC_CMDQ_DB_INFO_PATH_SHIFT 23 -#define HINIC_CMDQ_DB_INFO_CMDQ_TYPE_SHIFT 24 -#define HINIC_CMDQ_DB_INFO_DB_TYPE_SHIFT 27 - -#define HINIC_CMDQ_DB_INFO_HI_PROD_IDX_MASK 0xFF -#define HINIC_CMDQ_DB_INFO_PATH_MASK 0x1 -#define HINIC_CMDQ_DB_INFO_CMDQ_TYPE_MASK 0x7 -#define HINIC_CMDQ_DB_INFO_DB_TYPE_MASK 0x1F - -#define HINIC_CMDQ_DB_INFO_SET(val, member) \ - (((u32)(val) & HINIC_CMDQ_DB_INFO_##member##_MASK) \ - << HINIC_CMDQ_DB_INFO_##member##_SHIFT) - -#define HINIC_CMDQ_BUF_SIZE 2048 - -#define HINIC_CMDQ_BUF_HW_RSVD 8 -#define HINIC_CMDQ_MAX_DATA_SIZE (HINIC_CMDQ_BUF_SIZE - \ - HINIC_CMDQ_BUF_HW_RSVD) - -enum hinic_cmdq_type { - HINIC_CMDQ_SYNC, - - HINIC_MAX_CMDQ_TYPES, -}; - -enum hinic_set_arm_qtype { - HINIC_SET_ARM_CMDQ, -}; - -enum hinic_cmd_ack_type { - HINIC_CMD_ACK_TYPE_CMDQ, -}; - -struct hinic_cmdq_buf { - void *buf; - dma_addr_t dma_addr; - size_t size; -}; - -struct hinic_cmdq_arm_bit { - u32 q_type; - u32 q_id; -}; - -struct hinic_cmdq_ctxt_info { - u64 curr_wqe_page_pfn; - u64 wq_block_pfn; -}; - -struct hinic_cmdq_ctxt { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u8 cmdq_type; - u8 rsvd1[1]; - - u8 rsvd2[4]; - - struct hinic_cmdq_ctxt_info ctxt_info; -}; - -struct hinic_cmdq { - struct hinic_wq *wq; - - enum hinic_cmdq_type cmdq_type; - int wrapped; - - /* Lock for keeping the doorbell order */ - spinlock_t cmdq_lock; - - struct completion **done; - int **errcode; - - /* doorbell area */ - void __iomem *db_base; -}; - -struct hinic_cmdqs { - struct hinic_hwif *hwif; - - struct dma_pool *cmdq_buf_pool; - - struct hinic_wq *saved_wqs; - - struct hinic_cmdq_pages cmdq_pages; - - struct hinic_cmdq cmdq[HINIC_MAX_CMDQ_TYPES]; -}; - -int hinic_alloc_cmdq_buf(struct hinic_cmdqs *cmdqs, - struct hinic_cmdq_buf *cmdq_buf); - -void hinic_free_cmdq_buf(struct hinic_cmdqs *cmdqs, - struct hinic_cmdq_buf *cmdq_buf); - -int hinic_cmdq_direct_resp(struct hinic_cmdqs *cmdqs, - enum hinic_mod_type mod, u8 cmd, - struct hinic_cmdq_buf *buf_in, u64 *out_param); - -int hinic_set_arm_bit(struct hinic_cmdqs *cmdqs, - enum hinic_set_arm_qtype q_type, u32 q_id); - -int hinic_init_cmdqs(struct hinic_cmdqs *cmdqs, struct hinic_hwif *hwif, - void __iomem **db_area); - -void hinic_free_cmdqs(struct hinic_cmdqs *cmdqs); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h deleted file mode 100644 index f39b184..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_csr.h +++ /dev/null @@ -1,149 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_CSR_H -#define HINIC_HW_CSR_H - -/* HW interface registers */ -#define HINIC_CSR_FUNC_ATTR0_ADDR 0x0 -#define HINIC_CSR_FUNC_ATTR1_ADDR 0x4 - -#define HINIC_CSR_FUNC_ATTR4_ADDR 0x10 -#define HINIC_CSR_FUNC_ATTR5_ADDR 0x14 - -#define HINIC_DMA_ATTR_BASE 0xC80 -#define HINIC_ELECTION_BASE 0x4200 - -#define HINIC_DMA_ATTR_STRIDE 0x4 -#define HINIC_CSR_DMA_ATTR_ADDR(idx) \ - (HINIC_DMA_ATTR_BASE + (idx) * HINIC_DMA_ATTR_STRIDE) - -#define HINIC_PPF_ELECTION_STRIDE 0x4 -#define HINIC_CSR_MAX_PORTS 4 - -#define HINIC_CSR_PPF_ELECTION_ADDR(idx) \ - (HINIC_ELECTION_BASE + (idx) * HINIC_PPF_ELECTION_STRIDE) - -/* API CMD registers */ -#define HINIC_CSR_API_CMD_BASE 0xF000 - -#define HINIC_CSR_API_CMD_STRIDE 0x100 - -#define HINIC_CSR_API_CMD_CHAIN_HEAD_HI_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x0 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_CHAIN_HEAD_LO_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x4 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_STATUS_HI_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x8 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_STATUS_LO_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0xC + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_CHAIN_NUM_CELLS_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x10 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_CHAIN_CTRL_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x14 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_CHAIN_PI_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x1C + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_CHAIN_REQ_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x20 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -#define HINIC_CSR_API_CMD_STATUS_ADDR(idx) \ - (HINIC_CSR_API_CMD_BASE + 0x30 + (idx) * HINIC_CSR_API_CMD_STRIDE) - -/* MSI-X registers */ -#define HINIC_CSR_MSIX_CTRL_BASE 0x2000 -#define HINIC_CSR_MSIX_CNT_BASE 0x2004 - -#define HINIC_CSR_MSIX_STRIDE 0x8 - -#define HINIC_CSR_MSIX_CTRL_ADDR(idx) \ - (HINIC_CSR_MSIX_CTRL_BASE + (idx) * HINIC_CSR_MSIX_STRIDE) - -#define HINIC_CSR_MSIX_CNT_ADDR(idx) \ - (HINIC_CSR_MSIX_CNT_BASE + (idx) * HINIC_CSR_MSIX_STRIDE) - -/* EQ registers */ -#define HINIC_AEQ_MTT_OFF_BASE_ADDR 0x200 -#define HINIC_CEQ_MTT_OFF_BASE_ADDR 0x400 - -#define HINIC_EQ_MTT_OFF_STRIDE 0x40 - -#define HINIC_CSR_AEQ_MTT_OFF(id) \ - (HINIC_AEQ_MTT_OFF_BASE_ADDR + (id) * HINIC_EQ_MTT_OFF_STRIDE) - -#define HINIC_CSR_CEQ_MTT_OFF(id) \ - (HINIC_CEQ_MTT_OFF_BASE_ADDR + (id) * HINIC_EQ_MTT_OFF_STRIDE) - -#define HINIC_CSR_EQ_PAGE_OFF_STRIDE 8 - -#define HINIC_CSR_AEQ_HI_PHYS_ADDR_REG(q_id, pg_num) \ - (HINIC_CSR_AEQ_MTT_OFF(q_id) + \ - (pg_num) * HINIC_CSR_EQ_PAGE_OFF_STRIDE) - -#define HINIC_CSR_CEQ_HI_PHYS_ADDR_REG(q_id, pg_num) \ - (HINIC_CSR_CEQ_MTT_OFF(q_id) + \ - (pg_num) * HINIC_CSR_EQ_PAGE_OFF_STRIDE) - -#define HINIC_CSR_AEQ_LO_PHYS_ADDR_REG(q_id, pg_num) \ - (HINIC_CSR_AEQ_MTT_OFF(q_id) + \ - (pg_num) * HINIC_CSR_EQ_PAGE_OFF_STRIDE + 4) - -#define HINIC_CSR_CEQ_LO_PHYS_ADDR_REG(q_id, pg_num) \ - (HINIC_CSR_CEQ_MTT_OFF(q_id) + \ - (pg_num) * HINIC_CSR_EQ_PAGE_OFF_STRIDE + 4) - -#define HINIC_AEQ_CTRL_0_ADDR_BASE 0xE00 -#define HINIC_AEQ_CTRL_1_ADDR_BASE 0xE04 -#define HINIC_AEQ_CONS_IDX_ADDR_BASE 0xE08 -#define HINIC_AEQ_PROD_IDX_ADDR_BASE 0xE0C - -#define HINIC_CEQ_CTRL_0_ADDR_BASE 0x1000 -#define HINIC_CEQ_CTRL_1_ADDR_BASE 0x1004 -#define HINIC_CEQ_CONS_IDX_ADDR_BASE 0x1008 -#define HINIC_CEQ_PROD_IDX_ADDR_BASE 0x100C - -#define HINIC_EQ_OFF_STRIDE 0x80 - -#define HINIC_CSR_AEQ_CTRL_0_ADDR(idx) \ - (HINIC_AEQ_CTRL_0_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_AEQ_CTRL_1_ADDR(idx) \ - (HINIC_AEQ_CTRL_1_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_AEQ_CONS_IDX_ADDR(idx) \ - (HINIC_AEQ_CONS_IDX_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_AEQ_PROD_IDX_ADDR(idx) \ - (HINIC_AEQ_PROD_IDX_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_CEQ_CTRL_0_ADDR(idx) \ - (HINIC_CEQ_CTRL_0_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_CEQ_CTRL_1_ADDR(idx) \ - (HINIC_CEQ_CTRL_1_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_CEQ_CONS_IDX_ADDR(idx) \ - (HINIC_CEQ_CONS_IDX_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#define HINIC_CSR_CEQ_PROD_IDX_ADDR(idx) \ - (HINIC_CEQ_PROD_IDX_ADDR_BASE + (idx) * HINIC_EQ_OFF_STRIDE) - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c deleted file mode 100644 index 6b19607..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c +++ /dev/null @@ -1,1010 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/jiffies.h> -#include <linux/log2.h> -#include <linux/err.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_mgmt.h" -#include "hinic_hw_qp_ctxt.h" -#include "hinic_hw_qp.h" -#include "hinic_hw_io.h" -#include "hinic_hw_dev.h" - -#define IO_STATUS_TIMEOUT 100 -#define OUTBOUND_STATE_TIMEOUT 100 -#define DB_STATE_TIMEOUT 100 - -#define MAX_IRQS(max_qps, num_aeqs, num_ceqs) \ - (2 * (max_qps) + (num_aeqs) + (num_ceqs)) - -#define ADDR_IN_4BYTES(addr) ((addr) >> 2) - -enum intr_type { - INTR_MSIX_TYPE, -}; - -enum io_status { - IO_STOPPED = 0, - IO_RUNNING = 1, -}; - -enum hw_ioctxt_set_cmdq_depth { - HW_IOCTXT_SET_CMDQ_DEPTH_DEFAULT, -}; - -/* HW struct */ -struct hinic_dev_cap { - u8 status; - u8 version; - u8 rsvd0[6]; - - u8 rsvd1[5]; - u8 intr_type; - u8 rsvd2[66]; - u16 max_sqs; - u16 max_rqs; - u8 rsvd3[208]; -}; - -/** - * get_capability - convert device capabilities to NIC capabilities - * @hwdev: the HW device to set and convert device capabilities for - * @dev_cap: device capabilities from FW - * - * Return 0 - Success, negative - Failure - **/ -static int get_capability(struct hinic_hwdev *hwdev, - struct hinic_dev_cap *dev_cap) -{ - struct hinic_cap *nic_cap = &hwdev->nic_cap; - int num_aeqs, num_ceqs, num_irqs; - - if (!HINIC_IS_PF(hwdev->hwif) && !HINIC_IS_PPF(hwdev->hwif)) - return -EINVAL; - - if (dev_cap->intr_type != INTR_MSIX_TYPE) - return -EFAULT; - - num_aeqs = HINIC_HWIF_NUM_AEQS(hwdev->hwif); - num_ceqs = HINIC_HWIF_NUM_CEQS(hwdev->hwif); - num_irqs = HINIC_HWIF_NUM_IRQS(hwdev->hwif); - - /* Each QP has its own (SQ + RQ) interrupts */ - nic_cap->num_qps = (num_irqs - (num_aeqs + num_ceqs)) / 2; - - if (nic_cap->num_qps > HINIC_Q_CTXT_MAX) - nic_cap->num_qps = HINIC_Q_CTXT_MAX; - - /* num_qps must be power of 2 */ - nic_cap->num_qps = BIT(fls(nic_cap->num_qps) - 1); - - nic_cap->max_qps = dev_cap->max_sqs + 1; - if (nic_cap->max_qps != (dev_cap->max_rqs + 1)) - return -EFAULT; - - if (nic_cap->num_qps > nic_cap->max_qps) - nic_cap->num_qps = nic_cap->max_qps; - - return 0; -} - -/** - * get_cap_from_fw - get device capabilities from FW - * @pfhwdev: the PF HW device to get capabilities for - * - * Return 0 - Success, negative - Failure - **/ -static int get_cap_from_fw(struct hinic_pfhwdev *pfhwdev) -{ - struct hinic_hwdev *hwdev = &pfhwdev->hwdev; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_dev_cap dev_cap; - u16 in_len, out_len; - int err; - - in_len = 0; - out_len = sizeof(dev_cap); - - err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_CFGM, - HINIC_CFG_NIC_CAP, &dev_cap, in_len, &dev_cap, - &out_len, HINIC_MGMT_MSG_SYNC); - if (err) { - dev_err(&pdev->dev, "Failed to get capability from FW\n"); - return err; - } - - return get_capability(hwdev, &dev_cap); -} - -/** - * get_dev_cap - get device capabilities - * @hwdev: the NIC HW device to get capabilities for - * - * Return 0 - Success, negative - Failure - **/ -static int get_dev_cap(struct hinic_hwdev *hwdev) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - int err; - - switch (HINIC_FUNC_TYPE(hwif)) { - case HINIC_PPF: - case HINIC_PF: - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - err = get_cap_from_fw(pfhwdev); - if (err) { - dev_err(&pdev->dev, "Failed to get capability from FW\n"); - return err; - } - break; - - default: - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - return 0; -} - -/** - * init_msix - enable the msix and save the entries - * @hwdev: the NIC HW device - * - * Return 0 - Success, negative - Failure - **/ -static int init_msix(struct hinic_hwdev *hwdev) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - int nr_irqs, num_aeqs, num_ceqs; - size_t msix_entries_size; - int i, err; - - num_aeqs = HINIC_HWIF_NUM_AEQS(hwif); - num_ceqs = HINIC_HWIF_NUM_CEQS(hwif); - nr_irqs = MAX_IRQS(HINIC_MAX_QPS, num_aeqs, num_ceqs); - if (nr_irqs > HINIC_HWIF_NUM_IRQS(hwif)) - nr_irqs = HINIC_HWIF_NUM_IRQS(hwif); - - msix_entries_size = nr_irqs * sizeof(*hwdev->msix_entries); - hwdev->msix_entries = devm_kzalloc(&pdev->dev, msix_entries_size, - GFP_KERNEL); - if (!hwdev->msix_entries) - return -ENOMEM; - - for (i = 0; i < nr_irqs; i++) - hwdev->msix_entries[i].entry = i; - - err = pci_enable_msix_exact(pdev, hwdev->msix_entries, nr_irqs); - if (err) { - dev_err(&pdev->dev, "Failed to enable pci msix\n"); - return err; - } - - return 0; -} - -/** - * disable_msix - disable the msix - * @hwdev: the NIC HW device - **/ -static void disable_msix(struct hinic_hwdev *hwdev) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - - pci_disable_msix(pdev); -} - -/** - * hinic_port_msg_cmd - send port msg to mgmt - * @hwdev: the NIC HW device - * @cmd: the port command - * @buf_in: input buffer - * @in_size: input size - * @buf_out: output buffer - * @out_size: returned output size - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_msg_cmd(struct hinic_hwdev *hwdev, enum hinic_port_cmd cmd, - void *buf_in, u16 in_size, void *buf_out, u16 *out_size) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "unsupported PCI Function type\n"); - return -EINVAL; - } - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - return hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC, cmd, - buf_in, in_size, buf_out, out_size, - HINIC_MGMT_MSG_SYNC); -} - -/** - * init_fw_ctxt- Init Firmware tables before network mgmt and io operations - * @hwdev: the NIC HW device - * - * Return 0 - Success, negative - Failure - **/ -static int init_fw_ctxt(struct hinic_hwdev *hwdev) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_cmd_fw_ctxt fw_ctxt; - u16 out_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - fw_ctxt.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - fw_ctxt.rx_buf_sz = HINIC_RX_BUF_SZ; - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_FWCTXT_INIT, - &fw_ctxt, sizeof(fw_ctxt), - &fw_ctxt, &out_size); - if (err || (out_size != sizeof(fw_ctxt)) || fw_ctxt.status) { - dev_err(&pdev->dev, "Failed to init FW ctxt, ret = %d\n", - fw_ctxt.status); - return -EFAULT; - } - - return 0; -} - -/** - * set_hw_ioctxt - set the shape of the IO queues in FW - * @hwdev: the NIC HW device - * @rq_depth: rq depth - * @sq_depth: sq depth - * - * Return 0 - Success, negative - Failure - **/ -static int set_hw_ioctxt(struct hinic_hwdev *hwdev, unsigned int rq_depth, - unsigned int sq_depth) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct hinic_cmd_hw_ioctxt hw_ioctxt; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - hw_ioctxt.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - hw_ioctxt.set_cmdq_depth = HW_IOCTXT_SET_CMDQ_DEPTH_DEFAULT; - hw_ioctxt.cmdq_depth = 0; - - hw_ioctxt.rq_depth = ilog2(rq_depth); - - hw_ioctxt.rx_buf_sz_idx = HINIC_RX_BUF_SZ_IDX; - - hw_ioctxt.sq_depth = ilog2(sq_depth); - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - return hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM, - HINIC_COMM_CMD_HWCTXT_SET, - &hw_ioctxt, sizeof(hw_ioctxt), NULL, - NULL, HINIC_MGMT_MSG_SYNC); -} - -static int wait_for_outbound_state(struct hinic_hwdev *hwdev) -{ - enum hinic_outbound_state outbound_state; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - unsigned long end; - - end = jiffies + msecs_to_jiffies(OUTBOUND_STATE_TIMEOUT); - do { - outbound_state = hinic_outbound_state_get(hwif); - - if (outbound_state == HINIC_OUTBOUND_ENABLE) - return 0; - - msleep(20); - } while (time_before(jiffies, end)); - - dev_err(&pdev->dev, "Wait for OUTBOUND - Timeout\n"); - return -EFAULT; -} - -static int wait_for_db_state(struct hinic_hwdev *hwdev) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - enum hinic_db_state db_state; - unsigned long end; - - end = jiffies + msecs_to_jiffies(DB_STATE_TIMEOUT); - do { - db_state = hinic_db_state_get(hwif); - - if (db_state == HINIC_DB_ENABLE) - return 0; - - msleep(20); - } while (time_before(jiffies, end)); - - dev_err(&pdev->dev, "Wait for DB - Timeout\n"); - return -EFAULT; -} - -static int wait_for_io_stopped(struct hinic_hwdev *hwdev) -{ - struct hinic_cmd_io_status cmd_io_status; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - unsigned long end; - u16 out_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - cmd_io_status.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - end = jiffies + msecs_to_jiffies(IO_STATUS_TIMEOUT); - do { - err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM, - HINIC_COMM_CMD_IO_STATUS_GET, - &cmd_io_status, sizeof(cmd_io_status), - &cmd_io_status, &out_size, - HINIC_MGMT_MSG_SYNC); - if ((err) || (out_size != sizeof(cmd_io_status))) { - dev_err(&pdev->dev, "Failed to get IO status, ret = %d\n", - err); - return err; - } - - if (cmd_io_status.status == IO_STOPPED) { - dev_info(&pdev->dev, "IO stopped\n"); - return 0; - } - - msleep(20); - } while (time_before(jiffies, end)); - - dev_err(&pdev->dev, "Wait for IO stopped - Timeout\n"); - return -ETIMEDOUT; -} - -/** - * clear_io_resource - set the IO resources as not active in the NIC - * @hwdev: the NIC HW device - * - * Return 0 - Success, negative - Failure - **/ -static int clear_io_resources(struct hinic_hwdev *hwdev) -{ - struct hinic_cmd_clear_io_res cmd_clear_io_res; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - err = wait_for_io_stopped(hwdev); - if (err) { - dev_err(&pdev->dev, "IO has not stopped yet\n"); - return err; - } - - cmd_clear_io_res.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM, - HINIC_COMM_CMD_IO_RES_CLEAR, &cmd_clear_io_res, - sizeof(cmd_clear_io_res), NULL, NULL, - HINIC_MGMT_MSG_SYNC); - if (err) { - dev_err(&pdev->dev, "Failed to clear IO resources\n"); - return err; - } - - return 0; -} - -/** - * set_resources_state - set the state of the resources in the NIC - * @hwdev: the NIC HW device - * @state: the state to set - * - * Return 0 - Success, negative - Failure - **/ -static int set_resources_state(struct hinic_hwdev *hwdev, - enum hinic_res_state state) -{ - struct hinic_cmd_set_res_state res_state; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - res_state.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - res_state.state = state; - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - return hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, - HINIC_MOD_COMM, - HINIC_COMM_CMD_RES_STATE_SET, - &res_state, sizeof(res_state), NULL, - NULL, HINIC_MGMT_MSG_SYNC); -} - -/** - * get_base_qpn - get the first qp number - * @hwdev: the NIC HW device - * @base_qpn: returned qp number - * - * Return 0 - Success, negative - Failure - **/ -static int get_base_qpn(struct hinic_hwdev *hwdev, u16 *base_qpn) -{ - struct hinic_cmd_base_qpn cmd_base_qpn; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - cmd_base_qpn.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_GLOBAL_QPN, - &cmd_base_qpn, sizeof(cmd_base_qpn), - &cmd_base_qpn, &out_size); - if (err || (out_size != sizeof(cmd_base_qpn)) || cmd_base_qpn.status) { - dev_err(&pdev->dev, "Failed to get base qpn, status = %d\n", - cmd_base_qpn.status); - return -EFAULT; - } - - *base_qpn = cmd_base_qpn.qpn; - return 0; -} - -/** - * hinic_hwdev_ifup - Preparing the HW for passing IO - * @hwdev: the NIC HW device - * - * Return 0 - Success, negative - Failure - **/ -int hinic_hwdev_ifup(struct hinic_hwdev *hwdev) -{ - struct hinic_func_to_io *func_to_io = &hwdev->func_to_io; - struct hinic_cap *nic_cap = &hwdev->nic_cap; - struct hinic_hwif *hwif = hwdev->hwif; - int err, num_aeqs, num_ceqs, num_qps; - struct msix_entry *ceq_msix_entries; - struct msix_entry *sq_msix_entries; - struct msix_entry *rq_msix_entries; - struct pci_dev *pdev = hwif->pdev; - u16 base_qpn; - - err = get_base_qpn(hwdev, &base_qpn); - if (err) { - dev_err(&pdev->dev, "Failed to get global base qp number\n"); - return err; - } - - num_aeqs = HINIC_HWIF_NUM_AEQS(hwif); - num_ceqs = HINIC_HWIF_NUM_CEQS(hwif); - - ceq_msix_entries = &hwdev->msix_entries[num_aeqs]; - - err = hinic_io_init(func_to_io, hwif, nic_cap->max_qps, num_ceqs, - ceq_msix_entries); - if (err) { - dev_err(&pdev->dev, "Failed to init IO channel\n"); - return err; - } - - num_qps = nic_cap->num_qps; - sq_msix_entries = &hwdev->msix_entries[num_aeqs + num_ceqs]; - rq_msix_entries = &hwdev->msix_entries[num_aeqs + num_ceqs + num_qps]; - - err = hinic_io_create_qps(func_to_io, base_qpn, num_qps, - sq_msix_entries, rq_msix_entries); - if (err) { - dev_err(&pdev->dev, "Failed to create QPs\n"); - goto err_create_qps; - } - - err = wait_for_db_state(hwdev); - if (err) { - dev_warn(&pdev->dev, "db - disabled, try again\n"); - hinic_db_state_set(hwif, HINIC_DB_ENABLE); - } - - err = set_hw_ioctxt(hwdev, HINIC_SQ_DEPTH, HINIC_RQ_DEPTH); - if (err) { - dev_err(&pdev->dev, "Failed to set HW IO ctxt\n"); - goto err_hw_ioctxt; - } - - return 0; - -err_hw_ioctxt: - hinic_io_destroy_qps(func_to_io, num_qps); - -err_create_qps: - hinic_io_free(func_to_io); - return err; -} - -/** - * hinic_hwdev_ifdown - Closing the HW for passing IO - * @hwdev: the NIC HW device - * - **/ -void hinic_hwdev_ifdown(struct hinic_hwdev *hwdev) -{ - struct hinic_func_to_io *func_to_io = &hwdev->func_to_io; - struct hinic_cap *nic_cap = &hwdev->nic_cap; - - clear_io_resources(hwdev); - - hinic_io_destroy_qps(func_to_io, nic_cap->num_qps); - hinic_io_free(func_to_io); -} - -/** - * hinic_hwdev_cb_register - register callback handler for MGMT events - * @hwdev: the NIC HW device - * @cmd: the mgmt event - * @handle: private data for the handler - * @handler: event handler - **/ -void hinic_hwdev_cb_register(struct hinic_hwdev *hwdev, - enum hinic_mgmt_msg_cmd cmd, void *handle, - void (*handler)(void *handle, void *buf_in, - u16 in_size, void *buf_out, - u16 *out_size)) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - struct hinic_nic_cb *nic_cb; - u8 cmd_cb; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "unsupported PCI Function type\n"); - return; - } - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - cmd_cb = cmd - HINIC_MGMT_MSG_CMD_BASE; - nic_cb = &pfhwdev->nic_cb[cmd_cb]; - - nic_cb->handler = handler; - nic_cb->handle = handle; - nic_cb->cb_state = HINIC_CB_ENABLED; -} - -/** - * hinic_hwdev_cb_unregister - unregister callback handler for MGMT events - * @hwdev: the NIC HW device - * @cmd: the mgmt event - **/ -void hinic_hwdev_cb_unregister(struct hinic_hwdev *hwdev, - enum hinic_mgmt_msg_cmd cmd) -{ - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - struct hinic_nic_cb *nic_cb; - u8 cmd_cb; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "unsupported PCI Function type\n"); - return; - } - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - cmd_cb = cmd - HINIC_MGMT_MSG_CMD_BASE; - nic_cb = &pfhwdev->nic_cb[cmd_cb]; - - nic_cb->cb_state &= ~HINIC_CB_ENABLED; - - while (nic_cb->cb_state & HINIC_CB_RUNNING) - schedule(); - - nic_cb->handler = NULL; -} - -/** - * nic_mgmt_msg_handler - nic mgmt event handler - * @handle: private data for the handler - * @buf_in: input buffer - * @in_size: input size - * @buf_out: output buffer - * @out_size: returned output size - **/ -static void nic_mgmt_msg_handler(void *handle, u8 cmd, void *buf_in, - u16 in_size, void *buf_out, u16 *out_size) -{ - struct hinic_pfhwdev *pfhwdev = handle; - enum hinic_cb_state cb_state; - struct hinic_nic_cb *nic_cb; - struct hinic_hwdev *hwdev; - struct hinic_hwif *hwif; - struct pci_dev *pdev; - u8 cmd_cb; - - hwdev = &pfhwdev->hwdev; - hwif = hwdev->hwif; - pdev = hwif->pdev; - - if ((cmd < HINIC_MGMT_MSG_CMD_BASE) || - (cmd >= HINIC_MGMT_MSG_CMD_MAX)) { - dev_err(&pdev->dev, "unknown L2NIC event, cmd = %d\n", cmd); - return; - } - - cmd_cb = cmd - HINIC_MGMT_MSG_CMD_BASE; - - nic_cb = &pfhwdev->nic_cb[cmd_cb]; - - cb_state = cmpxchg(&nic_cb->cb_state, - HINIC_CB_ENABLED, - HINIC_CB_ENABLED | HINIC_CB_RUNNING); - - if ((cb_state == HINIC_CB_ENABLED) && (nic_cb->handler)) - nic_cb->handler(nic_cb->handle, buf_in, - in_size, buf_out, out_size); - else - dev_err(&pdev->dev, "Unhandled NIC Event %d\n", cmd); - - nic_cb->cb_state &= ~HINIC_CB_RUNNING; -} - -/** - * init_pfhwdev - Initialize the extended components of PF - * @pfhwdev: the HW device for PF - * - * Return 0 - success, negative - failure - **/ -static int init_pfhwdev(struct hinic_pfhwdev *pfhwdev) -{ - struct hinic_hwdev *hwdev = &pfhwdev->hwdev; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - int err; - - err = hinic_pf_to_mgmt_init(&pfhwdev->pf_to_mgmt, hwif); - if (err) { - dev_err(&pdev->dev, "Failed to initialize PF to MGMT channel\n"); - return err; - } - - hinic_register_mgmt_msg_cb(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC, - pfhwdev, nic_mgmt_msg_handler); - - hinic_set_pf_action(hwif, HINIC_PF_MGMT_ACTIVE); - return 0; -} - -/** - * free_pfhwdev - Free the extended components of PF - * @pfhwdev: the HW device for PF - **/ -static void free_pfhwdev(struct hinic_pfhwdev *pfhwdev) -{ - struct hinic_hwdev *hwdev = &pfhwdev->hwdev; - - hinic_set_pf_action(hwdev->hwif, HINIC_PF_MGMT_INIT); - - hinic_unregister_mgmt_msg_cb(&pfhwdev->pf_to_mgmt, HINIC_MOD_L2NIC); - - hinic_pf_to_mgmt_free(&pfhwdev->pf_to_mgmt); -} - -/** - * hinic_init_hwdev - Initialize the NIC HW - * @pdev: the NIC pci device - * - * Return initialized NIC HW device - * - * Initialize the NIC HW device and return a pointer to it - **/ -struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev) -{ - struct hinic_pfhwdev *pfhwdev; - struct hinic_hwdev *hwdev; - struct hinic_hwif *hwif; - int err, num_aeqs; - - hwif = devm_kzalloc(&pdev->dev, sizeof(*hwif), GFP_KERNEL); - if (!hwif) - return ERR_PTR(-ENOMEM); - - err = hinic_init_hwif(hwif, pdev); - if (err) { - dev_err(&pdev->dev, "Failed to init HW interface\n"); - return ERR_PTR(err); - } - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - err = -EFAULT; - goto err_func_type; - } - - pfhwdev = devm_kzalloc(&pdev->dev, sizeof(*pfhwdev), GFP_KERNEL); - if (!pfhwdev) { - err = -ENOMEM; - goto err_pfhwdev_alloc; - } - - hwdev = &pfhwdev->hwdev; - hwdev->hwif = hwif; - - err = init_msix(hwdev); - if (err) { - dev_err(&pdev->dev, "Failed to init msix\n"); - goto err_init_msix; - } - - err = wait_for_outbound_state(hwdev); - if (err) { - dev_warn(&pdev->dev, "outbound - disabled, try again\n"); - hinic_outbound_state_set(hwif, HINIC_OUTBOUND_ENABLE); - } - - num_aeqs = HINIC_HWIF_NUM_AEQS(hwif); - - err = hinic_aeqs_init(&hwdev->aeqs, hwif, num_aeqs, - HINIC_DEFAULT_AEQ_LEN, HINIC_EQ_PAGE_SIZE, - hwdev->msix_entries); - if (err) { - dev_err(&pdev->dev, "Failed to init async event queues\n"); - goto err_aeqs_init; - } - - err = init_pfhwdev(pfhwdev); - if (err) { - dev_err(&pdev->dev, "Failed to init PF HW device\n"); - goto err_init_pfhwdev; - } - - err = get_dev_cap(hwdev); - if (err) { - dev_err(&pdev->dev, "Failed to get device capabilities\n"); - goto err_dev_cap; - } - - err = init_fw_ctxt(hwdev); - if (err) { - dev_err(&pdev->dev, "Failed to init function table\n"); - goto err_init_fw_ctxt; - } - - err = set_resources_state(hwdev, HINIC_RES_ACTIVE); - if (err) { - dev_err(&pdev->dev, "Failed to set resources state\n"); - goto err_resources_state; - } - - return hwdev; - -err_resources_state: -err_init_fw_ctxt: -err_dev_cap: - free_pfhwdev(pfhwdev); - -err_init_pfhwdev: - hinic_aeqs_free(&hwdev->aeqs); - -err_aeqs_init: - disable_msix(hwdev); - -err_init_msix: -err_pfhwdev_alloc: -err_func_type: - hinic_free_hwif(hwif); - return ERR_PTR(err); -} - -/** - * hinic_free_hwdev - Free the NIC HW device - * @hwdev: the NIC HW device - **/ -void hinic_free_hwdev(struct hinic_hwdev *hwdev) -{ - struct hinic_pfhwdev *pfhwdev = container_of(hwdev, - struct hinic_pfhwdev, - hwdev); - - set_resources_state(hwdev, HINIC_RES_CLEAN); - - free_pfhwdev(pfhwdev); - - hinic_aeqs_free(&hwdev->aeqs); - - disable_msix(hwdev); - - hinic_free_hwif(hwdev->hwif); -} - -/** - * hinic_hwdev_num_qps - return the number QPs available for use - * @hwdev: the NIC HW device - * - * Return number QPs available for use - **/ -int hinic_hwdev_num_qps(struct hinic_hwdev *hwdev) -{ - struct hinic_cap *nic_cap = &hwdev->nic_cap; - - return nic_cap->num_qps; -} - -/** - * hinic_hwdev_get_sq - get SQ - * @hwdev: the NIC HW device - * @i: the position of the SQ - * - * Return: the SQ in the i position - **/ -struct hinic_sq *hinic_hwdev_get_sq(struct hinic_hwdev *hwdev, int i) -{ - struct hinic_func_to_io *func_to_io = &hwdev->func_to_io; - struct hinic_qp *qp = &func_to_io->qps[i]; - - if (i >= hinic_hwdev_num_qps(hwdev)) - return NULL; - - return &qp->sq; -} - -/** - * hinic_hwdev_get_sq - get RQ - * @hwdev: the NIC HW device - * @i: the position of the RQ - * - * Return: the RQ in the i position - **/ -struct hinic_rq *hinic_hwdev_get_rq(struct hinic_hwdev *hwdev, int i) -{ - struct hinic_func_to_io *func_to_io = &hwdev->func_to_io; - struct hinic_qp *qp = &func_to_io->qps[i]; - - if (i >= hinic_hwdev_num_qps(hwdev)) - return NULL; - - return &qp->rq; -} - -/** - * hinic_hwdev_msix_cnt_set - clear message attribute counters for msix entry - * @hwdev: the NIC HW device - * @msix_index: msix_index - * - * Return 0 - Success, negative - Failure - **/ -int hinic_hwdev_msix_cnt_set(struct hinic_hwdev *hwdev, u16 msix_index) -{ - return hinic_msix_attr_cnt_clear(hwdev->hwif, msix_index); -} - -/** - * hinic_hwdev_msix_set - set message attribute for msix entry - * @hwdev: the NIC HW device - * @msix_index: msix_index - * @pending_limit: the maximum pending interrupt events (unit 8) - * @coalesc_timer: coalesc period for interrupt (unit 8 us) - * @lli_timer: replenishing period for low latency credit (unit 8 us) - * @lli_credit_limit: maximum credits for low latency msix messages (unit 8) - * @resend_timer: maximum wait for resending msix (unit coalesc period) - * - * Return 0 - Success, negative - Failure - **/ -int hinic_hwdev_msix_set(struct hinic_hwdev *hwdev, u16 msix_index, - u8 pending_limit, u8 coalesc_timer, - u8 lli_timer_cfg, u8 lli_credit_limit, - u8 resend_timer) -{ - return hinic_msix_attr_set(hwdev->hwif, msix_index, - pending_limit, coalesc_timer, - lli_timer_cfg, lli_credit_limit, - resend_timer); -} - -/** - * hinic_hwdev_hw_ci_addr_set - set cons idx addr and attributes in HW for sq - * @hwdev: the NIC HW device - * @sq: send queue - * @pending_limit: the maximum pending update ci events (unit 8) - * @coalesc_timer: coalesc period for update ci (unit 8 us) - * - * Return 0 - Success, negative - Failure - **/ -int hinic_hwdev_hw_ci_addr_set(struct hinic_hwdev *hwdev, struct hinic_sq *sq, - u8 pending_limit, u8 coalesc_timer) -{ - struct hinic_qp *qp = container_of(sq, struct hinic_qp, sq); - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - struct hinic_cmd_hw_ci hw_ci; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - hw_ci.dma_attr_off = 0; - hw_ci.pending_limit = pending_limit; - hw_ci.coalesc_timer = coalesc_timer; - - hw_ci.msix_en = 1; - hw_ci.msix_entry_idx = sq->msix_entry; - - hw_ci.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - hw_ci.sq_id = qp->q_id; - - hw_ci.ci_addr = ADDR_IN_4BYTES(sq->hw_ci_dma_addr); - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - return hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, - HINIC_MOD_COMM, - HINIC_COMM_CMD_SQ_HI_CI_SET, - &hw_ci, sizeof(hw_ci), NULL, - NULL, HINIC_MGMT_MSG_SYNC); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h deleted file mode 100644 index 0f5563f..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.h +++ /dev/null @@ -1,239 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_DEV_H -#define HINIC_HW_DEV_H - -#include <linux/pci.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_mgmt.h" -#include "hinic_hw_qp.h" -#include "hinic_hw_io.h" - -#define HINIC_MAX_QPS 32 - -#define HINIC_MGMT_NUM_MSG_CMD (HINIC_MGMT_MSG_CMD_MAX - \ - HINIC_MGMT_MSG_CMD_BASE) - -struct hinic_cap { - u16 max_qps; - u16 num_qps; -}; - -enum hinic_port_cmd { - HINIC_PORT_CMD_CHANGE_MTU = 2, - - HINIC_PORT_CMD_ADD_VLAN = 3, - HINIC_PORT_CMD_DEL_VLAN = 4, - - HINIC_PORT_CMD_SET_MAC = 9, - HINIC_PORT_CMD_GET_MAC = 10, - HINIC_PORT_CMD_DEL_MAC = 11, - - HINIC_PORT_CMD_SET_RX_MODE = 12, - - HINIC_PORT_CMD_GET_LINK_STATE = 24, - - HINIC_PORT_CMD_SET_PORT_STATE = 41, - - HINIC_PORT_CMD_FWCTXT_INIT = 69, - - HINIC_PORT_CMD_SET_FUNC_STATE = 93, - - HINIC_PORT_CMD_GET_GLOBAL_QPN = 102, - - HINIC_PORT_CMD_GET_CAP = 170, -}; - -enum hinic_mgmt_msg_cmd { - HINIC_MGMT_MSG_CMD_BASE = 160, - - HINIC_MGMT_MSG_CMD_LINK_STATUS = 160, - - HINIC_MGMT_MSG_CMD_MAX, -}; - -enum hinic_cb_state { - HINIC_CB_ENABLED = BIT(0), - HINIC_CB_RUNNING = BIT(1), -}; - -enum hinic_res_state { - HINIC_RES_CLEAN = 0, - HINIC_RES_ACTIVE = 1, -}; - -struct hinic_cmd_fw_ctxt { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 rx_buf_sz; - - u32 rsvd1; -}; - -struct hinic_cmd_hw_ioctxt { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - - u16 rsvd1; - - u8 set_cmdq_depth; - u8 cmdq_depth; - - u8 rsvd2; - u8 rsvd3; - u8 rsvd4; - u8 rsvd5; - - u16 rq_depth; - u16 rx_buf_sz_idx; - u16 sq_depth; -}; - -struct hinic_cmd_io_status { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u8 rsvd1; - u8 rsvd2; - u32 io_status; -}; - -struct hinic_cmd_clear_io_res { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u8 rsvd1; - u8 rsvd2; -}; - -struct hinic_cmd_set_res_state { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u8 state; - u8 rsvd1; - u32 rsvd2; -}; - -struct hinic_cmd_base_qpn { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 qpn; -}; - -struct hinic_cmd_hw_ci { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - - u8 dma_attr_off; - u8 pending_limit; - u8 coalesc_timer; - - u8 msix_en; - u16 msix_entry_idx; - - u32 sq_id; - u32 rsvd1; - u64 ci_addr; -}; - -struct hinic_hwdev { - struct hinic_hwif *hwif; - struct msix_entry *msix_entries; - - struct hinic_aeqs aeqs; - struct hinic_func_to_io func_to_io; - - struct hinic_cap nic_cap; -}; - -struct hinic_nic_cb { - void (*handler)(void *handle, void *buf_in, - u16 in_size, void *buf_out, - u16 *out_size); - - void *handle; - unsigned long cb_state; -}; - -struct hinic_pfhwdev { - struct hinic_hwdev hwdev; - - struct hinic_pf_to_mgmt pf_to_mgmt; - - struct hinic_nic_cb nic_cb[HINIC_MGMT_NUM_MSG_CMD]; -}; - -void hinic_hwdev_cb_register(struct hinic_hwdev *hwdev, - enum hinic_mgmt_msg_cmd cmd, void *handle, - void (*handler)(void *handle, void *buf_in, - u16 in_size, void *buf_out, - u16 *out_size)); - -void hinic_hwdev_cb_unregister(struct hinic_hwdev *hwdev, - enum hinic_mgmt_msg_cmd cmd); - -int hinic_port_msg_cmd(struct hinic_hwdev *hwdev, enum hinic_port_cmd cmd, - void *buf_in, u16 in_size, void *buf_out, - u16 *out_size); - -int hinic_hwdev_ifup(struct hinic_hwdev *hwdev); - -void hinic_hwdev_ifdown(struct hinic_hwdev *hwdev); - -struct hinic_hwdev *hinic_init_hwdev(struct pci_dev *pdev); - -void hinic_free_hwdev(struct hinic_hwdev *hwdev); - -int hinic_hwdev_num_qps(struct hinic_hwdev *hwdev); - -struct hinic_sq *hinic_hwdev_get_sq(struct hinic_hwdev *hwdev, int i); - -struct hinic_rq *hinic_hwdev_get_rq(struct hinic_hwdev *hwdev, int i); - -int hinic_hwdev_msix_cnt_set(struct hinic_hwdev *hwdev, u16 msix_index); - -int hinic_hwdev_msix_set(struct hinic_hwdev *hwdev, u16 msix_index, - u8 pending_limit, u8 coalesc_timer, - u8 lli_timer_cfg, u8 lli_credit_limit, - u8 resend_timer); - -int hinic_hwdev_hw_ci_addr_set(struct hinic_hwdev *hwdev, struct hinic_sq *sq, - u8 pending_limit, u8 coalesc_timer); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c deleted file mode 100644 index 7cb8b9b9..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.c +++ /dev/null @@ -1,886 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/log2.h> -#include <asm/byteorder.h> -#include <asm/barrier.h> - -#include "hinic_hw_csr.h" -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" - -#define HINIC_EQS_WQ_NAME "hinic_eqs" - -#define GET_EQ_NUM_PAGES(eq, pg_size) \ - (ALIGN((eq)->q_len * (eq)->elem_size, pg_size) / (pg_size)) - -#define GET_EQ_NUM_ELEMS_IN_PG(eq, pg_size) ((pg_size) / (eq)->elem_size) - -#define EQ_CONS_IDX_REG_ADDR(eq) (((eq)->type == HINIC_AEQ) ? \ - HINIC_CSR_AEQ_CONS_IDX_ADDR((eq)->q_id) : \ - HINIC_CSR_CEQ_CONS_IDX_ADDR((eq)->q_id)) - -#define EQ_PROD_IDX_REG_ADDR(eq) (((eq)->type == HINIC_AEQ) ? \ - HINIC_CSR_AEQ_PROD_IDX_ADDR((eq)->q_id) : \ - HINIC_CSR_CEQ_PROD_IDX_ADDR((eq)->q_id)) - -#define EQ_HI_PHYS_ADDR_REG(eq, pg_num) (((eq)->type == HINIC_AEQ) ? \ - HINIC_CSR_AEQ_HI_PHYS_ADDR_REG((eq)->q_id, pg_num) : \ - HINIC_CSR_CEQ_HI_PHYS_ADDR_REG((eq)->q_id, pg_num)) - -#define EQ_LO_PHYS_ADDR_REG(eq, pg_num) (((eq)->type == HINIC_AEQ) ? \ - HINIC_CSR_AEQ_LO_PHYS_ADDR_REG((eq)->q_id, pg_num) : \ - HINIC_CSR_CEQ_LO_PHYS_ADDR_REG((eq)->q_id, pg_num)) - -#define GET_EQ_ELEMENT(eq, idx) \ - ((eq)->virt_addr[(idx) / (eq)->num_elem_in_pg] + \ - (((idx) & ((eq)->num_elem_in_pg - 1)) * (eq)->elem_size)) - -#define GET_AEQ_ELEM(eq, idx) ((struct hinic_aeq_elem *) \ - GET_EQ_ELEMENT(eq, idx)) - -#define GET_CEQ_ELEM(eq, idx) ((u32 *) \ - GET_EQ_ELEMENT(eq, idx)) - -#define GET_CURR_AEQ_ELEM(eq) GET_AEQ_ELEM(eq, (eq)->cons_idx) - -#define GET_CURR_CEQ_ELEM(eq) GET_CEQ_ELEM(eq, (eq)->cons_idx) - -#define PAGE_IN_4K(page_size) ((page_size) >> 12) -#define EQ_SET_HW_PAGE_SIZE_VAL(eq) (ilog2(PAGE_IN_4K((eq)->page_size))) - -#define ELEMENT_SIZE_IN_32B(eq) (((eq)->elem_size) >> 5) -#define EQ_SET_HW_ELEM_SIZE_VAL(eq) (ilog2(ELEMENT_SIZE_IN_32B(eq))) - -#define EQ_MAX_PAGES 8 - -#define CEQE_TYPE_SHIFT 23 -#define CEQE_TYPE_MASK 0x7 - -#define CEQE_TYPE(ceqe) (((ceqe) >> CEQE_TYPE_SHIFT) & \ - CEQE_TYPE_MASK) - -#define CEQE_DATA_MASK 0x3FFFFFF -#define CEQE_DATA(ceqe) ((ceqe) & CEQE_DATA_MASK) - -#define aeq_to_aeqs(eq) \ - container_of((eq) - (eq)->q_id, struct hinic_aeqs, aeq[0]) - -#define ceq_to_ceqs(eq) \ - container_of((eq) - (eq)->q_id, struct hinic_ceqs, ceq[0]) - -#define work_to_aeq_work(work) \ - container_of(work, struct hinic_eq_work, work) - -#define DMA_ATTR_AEQ_DEFAULT 0 -#define DMA_ATTR_CEQ_DEFAULT 0 - -/* No coalescence */ -#define THRESH_CEQ_DEFAULT 0 - -enum eq_int_mode { - EQ_INT_MODE_ARMED, - EQ_INT_MODE_ALWAYS -}; - -enum eq_arm_state { - EQ_NOT_ARMED, - EQ_ARMED -}; - -/** - * hinic_aeq_register_hw_cb - register AEQ callback for specific event - * @aeqs: pointer to Async eqs of the chip - * @event: aeq event to register callback for it - * @handle: private data will be used by the callback - * @hw_handler: callback function - **/ -void hinic_aeq_register_hw_cb(struct hinic_aeqs *aeqs, - enum hinic_aeq_type event, void *handle, - void (*hwe_handler)(void *handle, void *data, - u8 size)) -{ - struct hinic_hw_event_cb *hwe_cb = &aeqs->hwe_cb[event]; - - hwe_cb->hwe_handler = hwe_handler; - hwe_cb->handle = handle; - hwe_cb->hwe_state = HINIC_EQE_ENABLED; -} - -/** - * hinic_aeq_unregister_hw_cb - unregister the AEQ callback for specific event - * @aeqs: pointer to Async eqs of the chip - * @event: aeq event to unregister callback for it - **/ -void hinic_aeq_unregister_hw_cb(struct hinic_aeqs *aeqs, - enum hinic_aeq_type event) -{ - struct hinic_hw_event_cb *hwe_cb = &aeqs->hwe_cb[event]; - - hwe_cb->hwe_state &= ~HINIC_EQE_ENABLED; - - while (hwe_cb->hwe_state & HINIC_EQE_RUNNING) - schedule(); - - hwe_cb->hwe_handler = NULL; -} - -/** - * hinic_ceq_register_cb - register CEQ callback for specific event - * @ceqs: pointer to Completion eqs part of the chip - * @event: ceq event to register callback for it - * @handle: private data will be used by the callback - * @handler: callback function - **/ -void hinic_ceq_register_cb(struct hinic_ceqs *ceqs, - enum hinic_ceq_type event, void *handle, - void (*handler)(void *handle, u32 ceqe_data)) -{ - struct hinic_ceq_cb *ceq_cb = &ceqs->ceq_cb[event]; - - ceq_cb->handler = handler; - ceq_cb->handle = handle; - ceq_cb->ceqe_state = HINIC_EQE_ENABLED; -} - -/** - * hinic_ceq_unregister_cb - unregister the CEQ callback for specific event - * @ceqs: pointer to Completion eqs part of the chip - * @event: ceq event to unregister callback for it - **/ -void hinic_ceq_unregister_cb(struct hinic_ceqs *ceqs, - enum hinic_ceq_type event) -{ - struct hinic_ceq_cb *ceq_cb = &ceqs->ceq_cb[event]; - - ceq_cb->ceqe_state &= ~HINIC_EQE_ENABLED; - - while (ceq_cb->ceqe_state & HINIC_EQE_RUNNING) - schedule(); - - ceq_cb->handler = NULL; -} - -static u8 eq_cons_idx_checksum_set(u32 val) -{ - u8 checksum = 0; - int idx; - - for (idx = 0; idx < 32; idx += 4) - checksum ^= ((val >> idx) & 0xF); - - return (checksum & 0xF); -} - -/** - * eq_update_ci - update the HW cons idx of event queue - * @eq: the event queue to update the cons idx for - **/ -static void eq_update_ci(struct hinic_eq *eq) -{ - u32 val, addr = EQ_CONS_IDX_REG_ADDR(eq); - - /* Read Modify Write */ - val = hinic_hwif_read_reg(eq->hwif, addr); - - val = HINIC_EQ_CI_CLEAR(val, IDX) & - HINIC_EQ_CI_CLEAR(val, WRAPPED) & - HINIC_EQ_CI_CLEAR(val, INT_ARMED) & - HINIC_EQ_CI_CLEAR(val, XOR_CHKSUM); - - val |= HINIC_EQ_CI_SET(eq->cons_idx, IDX) | - HINIC_EQ_CI_SET(eq->wrapped, WRAPPED) | - HINIC_EQ_CI_SET(EQ_ARMED, INT_ARMED); - - val |= HINIC_EQ_CI_SET(eq_cons_idx_checksum_set(val), XOR_CHKSUM); - - hinic_hwif_write_reg(eq->hwif, addr, val); -} - -/** - * aeq_irq_handler - handler for the AEQ event - * @eq: the Async Event Queue that received the event - **/ -static void aeq_irq_handler(struct hinic_eq *eq) -{ - struct hinic_aeqs *aeqs = aeq_to_aeqs(eq); - struct hinic_hwif *hwif = aeqs->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_aeq_elem *aeqe_curr; - struct hinic_hw_event_cb *hwe_cb; - enum hinic_aeq_type event; - unsigned long eqe_state; - u32 aeqe_desc; - int i, size; - - for (i = 0; i < eq->q_len; i++) { - aeqe_curr = GET_CURR_AEQ_ELEM(eq); - - /* Data in HW is in Big endian Format */ - aeqe_desc = be32_to_cpu(aeqe_curr->desc); - - /* HW toggles the wrapped bit, when it adds eq element */ - if (HINIC_EQ_ELEM_DESC_GET(aeqe_desc, WRAPPED) == eq->wrapped) - break; - - event = HINIC_EQ_ELEM_DESC_GET(aeqe_desc, TYPE); - if (event >= HINIC_MAX_AEQ_EVENTS) { - dev_err(&pdev->dev, "Unknown AEQ Event %d\n", event); - return; - } - - if (!HINIC_EQ_ELEM_DESC_GET(aeqe_desc, SRC)) { - hwe_cb = &aeqs->hwe_cb[event]; - - size = HINIC_EQ_ELEM_DESC_GET(aeqe_desc, SIZE); - - eqe_state = cmpxchg(&hwe_cb->hwe_state, - HINIC_EQE_ENABLED, - HINIC_EQE_ENABLED | - HINIC_EQE_RUNNING); - if ((eqe_state == HINIC_EQE_ENABLED) && - (hwe_cb->hwe_handler)) - hwe_cb->hwe_handler(hwe_cb->handle, - aeqe_curr->data, size); - else - dev_err(&pdev->dev, "Unhandled AEQ Event %d\n", - event); - - hwe_cb->hwe_state &= ~HINIC_EQE_RUNNING; - } - - eq->cons_idx++; - - if (eq->cons_idx == eq->q_len) { - eq->cons_idx = 0; - eq->wrapped = !eq->wrapped; - } - } -} - -/** - * ceq_event_handler - handler for the ceq events - * @ceqs: ceqs part of the chip - * @ceqe: ceq element that describes the event - **/ -static void ceq_event_handler(struct hinic_ceqs *ceqs, u32 ceqe) -{ - struct hinic_hwif *hwif = ceqs->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_ceq_cb *ceq_cb; - enum hinic_ceq_type event; - unsigned long eqe_state; - - event = CEQE_TYPE(ceqe); - if (event >= HINIC_MAX_CEQ_EVENTS) { - dev_err(&pdev->dev, "Unknown CEQ event, event = %d\n", event); - return; - } - - ceq_cb = &ceqs->ceq_cb[event]; - - eqe_state = cmpxchg(&ceq_cb->ceqe_state, - HINIC_EQE_ENABLED, - HINIC_EQE_ENABLED | HINIC_EQE_RUNNING); - - if ((eqe_state == HINIC_EQE_ENABLED) && (ceq_cb->handler)) - ceq_cb->handler(ceq_cb->handle, CEQE_DATA(ceqe)); - else - dev_err(&pdev->dev, "Unhandled CEQ Event %d\n", event); - - ceq_cb->ceqe_state &= ~HINIC_EQE_RUNNING; -} - -/** - * ceq_irq_handler - handler for the CEQ event - * @eq: the Completion Event Queue that received the event - **/ -static void ceq_irq_handler(struct hinic_eq *eq) -{ - struct hinic_ceqs *ceqs = ceq_to_ceqs(eq); - u32 ceqe; - int i; - - for (i = 0; i < eq->q_len; i++) { - ceqe = *(GET_CURR_CEQ_ELEM(eq)); - - /* Data in HW is in Big endian Format */ - ceqe = be32_to_cpu(ceqe); - - /* HW toggles the wrapped bit, when it adds eq element event */ - if (HINIC_EQ_ELEM_DESC_GET(ceqe, WRAPPED) == eq->wrapped) - break; - - ceq_event_handler(ceqs, ceqe); - - eq->cons_idx++; - - if (eq->cons_idx == eq->q_len) { - eq->cons_idx = 0; - eq->wrapped = !eq->wrapped; - } - } -} - -/** - * eq_irq_handler - handler for the EQ event - * @data: the Event Queue that received the event - **/ -static void eq_irq_handler(void *data) -{ - struct hinic_eq *eq = data; - - if (eq->type == HINIC_AEQ) - aeq_irq_handler(eq); - else if (eq->type == HINIC_CEQ) - ceq_irq_handler(eq); - - eq_update_ci(eq); -} - -/** - * eq_irq_work - the work of the EQ that received the event - * @work: the work struct that is associated with the EQ - **/ -static void eq_irq_work(struct work_struct *work) -{ - struct hinic_eq_work *aeq_work = work_to_aeq_work(work); - struct hinic_eq *aeq; - - aeq = aeq_work->data; - eq_irq_handler(aeq); -} - -/** - * ceq_tasklet - the tasklet of the EQ that received the event - * @ceq_data: the eq - **/ -static void ceq_tasklet(unsigned long ceq_data) -{ - struct hinic_eq *ceq = (struct hinic_eq *)ceq_data; - - eq_irq_handler(ceq); -} - -/** - * aeq_interrupt - aeq interrupt handler - * @irq: irq number - * @data: the Async Event Queue that collected the event - **/ -static irqreturn_t aeq_interrupt(int irq, void *data) -{ - struct hinic_eq_work *aeq_work; - struct hinic_eq *aeq = data; - struct hinic_aeqs *aeqs; - - /* clear resend timer cnt register */ - hinic_msix_attr_cnt_clear(aeq->hwif, aeq->msix_entry.entry); - - aeq_work = &aeq->aeq_work; - aeq_work->data = aeq; - - aeqs = aeq_to_aeqs(aeq); - queue_work(aeqs->workq, &aeq_work->work); - - return IRQ_HANDLED; -} - -/** - * ceq_interrupt - ceq interrupt handler - * @irq: irq number - * @data: the Completion Event Queue that collected the event - **/ -static irqreturn_t ceq_interrupt(int irq, void *data) -{ - struct hinic_eq *ceq = data; - - /* clear resend timer cnt register */ - hinic_msix_attr_cnt_clear(ceq->hwif, ceq->msix_entry.entry); - - tasklet_schedule(&ceq->ceq_tasklet); - - return IRQ_HANDLED; -} - -static void set_ctrl0(struct hinic_eq *eq) -{ - struct msix_entry *msix_entry = &eq->msix_entry; - enum hinic_eq_type type = eq->type; - u32 addr, val, ctrl0; - - if (type == HINIC_AEQ) { - /* RMW Ctrl0 */ - addr = HINIC_CSR_AEQ_CTRL_0_ADDR(eq->q_id); - - val = hinic_hwif_read_reg(eq->hwif, addr); - - val = HINIC_AEQ_CTRL_0_CLEAR(val, INT_IDX) & - HINIC_AEQ_CTRL_0_CLEAR(val, DMA_ATTR) & - HINIC_AEQ_CTRL_0_CLEAR(val, PCI_INTF_IDX) & - HINIC_AEQ_CTRL_0_CLEAR(val, INT_MODE); - - ctrl0 = HINIC_AEQ_CTRL_0_SET(msix_entry->entry, INT_IDX) | - HINIC_AEQ_CTRL_0_SET(DMA_ATTR_AEQ_DEFAULT, DMA_ATTR) | - HINIC_AEQ_CTRL_0_SET(HINIC_HWIF_PCI_INTF(eq->hwif), - PCI_INTF_IDX) | - HINIC_AEQ_CTRL_0_SET(EQ_INT_MODE_ARMED, INT_MODE); - - val |= ctrl0; - - hinic_hwif_write_reg(eq->hwif, addr, val); - } else if (type == HINIC_CEQ) { - /* RMW Ctrl0 */ - addr = HINIC_CSR_CEQ_CTRL_0_ADDR(eq->q_id); - - val = hinic_hwif_read_reg(eq->hwif, addr); - - val = HINIC_CEQ_CTRL_0_CLEAR(val, INTR_IDX) & - HINIC_CEQ_CTRL_0_CLEAR(val, DMA_ATTR) & - HINIC_CEQ_CTRL_0_CLEAR(val, KICK_THRESH) & - HINIC_CEQ_CTRL_0_CLEAR(val, PCI_INTF_IDX) & - HINIC_CEQ_CTRL_0_CLEAR(val, INTR_MODE); - - ctrl0 = HINIC_CEQ_CTRL_0_SET(msix_entry->entry, INTR_IDX) | - HINIC_CEQ_CTRL_0_SET(DMA_ATTR_CEQ_DEFAULT, DMA_ATTR) | - HINIC_CEQ_CTRL_0_SET(THRESH_CEQ_DEFAULT, KICK_THRESH) | - HINIC_CEQ_CTRL_0_SET(HINIC_HWIF_PCI_INTF(eq->hwif), - PCI_INTF_IDX) | - HINIC_CEQ_CTRL_0_SET(EQ_INT_MODE_ARMED, INTR_MODE); - - val |= ctrl0; - - hinic_hwif_write_reg(eq->hwif, addr, val); - } -} - -static void set_ctrl1(struct hinic_eq *eq) -{ - enum hinic_eq_type type = eq->type; - u32 page_size_val, elem_size; - u32 addr, val, ctrl1; - - if (type == HINIC_AEQ) { - /* RMW Ctrl1 */ - addr = HINIC_CSR_AEQ_CTRL_1_ADDR(eq->q_id); - - page_size_val = EQ_SET_HW_PAGE_SIZE_VAL(eq); - elem_size = EQ_SET_HW_ELEM_SIZE_VAL(eq); - - val = hinic_hwif_read_reg(eq->hwif, addr); - - val = HINIC_AEQ_CTRL_1_CLEAR(val, LEN) & - HINIC_AEQ_CTRL_1_CLEAR(val, ELEM_SIZE) & - HINIC_AEQ_CTRL_1_CLEAR(val, PAGE_SIZE); - - ctrl1 = HINIC_AEQ_CTRL_1_SET(eq->q_len, LEN) | - HINIC_AEQ_CTRL_1_SET(elem_size, ELEM_SIZE) | - HINIC_AEQ_CTRL_1_SET(page_size_val, PAGE_SIZE); - - val |= ctrl1; - - hinic_hwif_write_reg(eq->hwif, addr, val); - } else if (type == HINIC_CEQ) { - /* RMW Ctrl1 */ - addr = HINIC_CSR_CEQ_CTRL_1_ADDR(eq->q_id); - - page_size_val = EQ_SET_HW_PAGE_SIZE_VAL(eq); - - val = hinic_hwif_read_reg(eq->hwif, addr); - - val = HINIC_CEQ_CTRL_1_CLEAR(val, LEN) & - HINIC_CEQ_CTRL_1_CLEAR(val, PAGE_SIZE); - - ctrl1 = HINIC_CEQ_CTRL_1_SET(eq->q_len, LEN) | - HINIC_CEQ_CTRL_1_SET(page_size_val, PAGE_SIZE); - - val |= ctrl1; - - hinic_hwif_write_reg(eq->hwif, addr, val); - } -} - -/** - * set_eq_ctrls - setting eq's ctrl registers - * @eq: the Event Queue for setting - **/ -static void set_eq_ctrls(struct hinic_eq *eq) -{ - set_ctrl0(eq); - set_ctrl1(eq); -} - -/** - * aeq_elements_init - initialize all the elements in the aeq - * @eq: the Async Event Queue - * @init_val: value to initialize the elements with it - **/ -static void aeq_elements_init(struct hinic_eq *eq, u32 init_val) -{ - struct hinic_aeq_elem *aeqe; - int i; - - for (i = 0; i < eq->q_len; i++) { - aeqe = GET_AEQ_ELEM(eq, i); - aeqe->desc = cpu_to_be32(init_val); - } - - wmb(); /* Write the initilzation values */ -} - -/** - * ceq_elements_init - Initialize all the elements in the ceq - * @eq: the event queue - * @init_val: value to init with it the elements - **/ -static void ceq_elements_init(struct hinic_eq *eq, u32 init_val) -{ - u32 *ceqe; - int i; - - for (i = 0; i < eq->q_len; i++) { - ceqe = GET_CEQ_ELEM(eq, i); - *(ceqe) = cpu_to_be32(init_val); - } - - wmb(); /* Write the initilzation values */ -} - -/** - * alloc_eq_pages - allocate the pages for the queue - * @eq: the event queue - * - * Return 0 - Success, Negative - Failure - **/ -static int alloc_eq_pages(struct hinic_eq *eq) -{ - struct hinic_hwif *hwif = eq->hwif; - struct pci_dev *pdev = hwif->pdev; - u32 init_val, addr, val; - size_t addr_size; - int err, pg; - - addr_size = eq->num_pages * sizeof(*eq->dma_addr); - eq->dma_addr = devm_kzalloc(&pdev->dev, addr_size, GFP_KERNEL); - if (!eq->dma_addr) - return -ENOMEM; - - addr_size = eq->num_pages * sizeof(*eq->virt_addr); - eq->virt_addr = devm_kzalloc(&pdev->dev, addr_size, GFP_KERNEL); - if (!eq->virt_addr) { - err = -ENOMEM; - goto err_virt_addr_alloc; - } - - for (pg = 0; pg < eq->num_pages; pg++) { - eq->virt_addr[pg] = dma_zalloc_coherent(&pdev->dev, - eq->page_size, - &eq->dma_addr[pg], - GFP_KERNEL); - if (!eq->virt_addr[pg]) { - err = -ENOMEM; - goto err_dma_alloc; - } - - addr = EQ_HI_PHYS_ADDR_REG(eq, pg); - val = upper_32_bits(eq->dma_addr[pg]); - - hinic_hwif_write_reg(hwif, addr, val); - - addr = EQ_LO_PHYS_ADDR_REG(eq, pg); - val = lower_32_bits(eq->dma_addr[pg]); - - hinic_hwif_write_reg(hwif, addr, val); - } - - init_val = HINIC_EQ_ELEM_DESC_SET(eq->wrapped, WRAPPED); - - if (eq->type == HINIC_AEQ) - aeq_elements_init(eq, init_val); - else if (eq->type == HINIC_CEQ) - ceq_elements_init(eq, init_val); - - return 0; - -err_dma_alloc: - while (--pg >= 0) - dma_free_coherent(&pdev->dev, eq->page_size, - eq->virt_addr[pg], - eq->dma_addr[pg]); - - devm_kfree(&pdev->dev, eq->virt_addr); - -err_virt_addr_alloc: - devm_kfree(&pdev->dev, eq->dma_addr); - return err; -} - -/** - * free_eq_pages - free the pages of the queue - * @eq: the Event Queue - **/ -static void free_eq_pages(struct hinic_eq *eq) -{ - struct hinic_hwif *hwif = eq->hwif; - struct pci_dev *pdev = hwif->pdev; - int pg; - - for (pg = 0; pg < eq->num_pages; pg++) - dma_free_coherent(&pdev->dev, eq->page_size, - eq->virt_addr[pg], - eq->dma_addr[pg]); - - devm_kfree(&pdev->dev, eq->virt_addr); - devm_kfree(&pdev->dev, eq->dma_addr); -} - -/** - * init_eq - initialize Event Queue - * @eq: the event queue - * @hwif: the HW interface of a PCI function device - * @type: the type of the event queue, aeq or ceq - * @q_id: Queue id number - * @q_len: the number of EQ elements - * @page_size: the page size of the pages in the event queue - * @entry: msix entry associated with the event queue - * - * Return 0 - Success, Negative - Failure - **/ -static int init_eq(struct hinic_eq *eq, struct hinic_hwif *hwif, - enum hinic_eq_type type, int q_id, u32 q_len, u32 page_size, - struct msix_entry entry) -{ - struct pci_dev *pdev = hwif->pdev; - int err; - - eq->hwif = hwif; - eq->type = type; - eq->q_id = q_id; - eq->q_len = q_len; - eq->page_size = page_size; - - /* Clear PI and CI, also clear the ARM bit */ - hinic_hwif_write_reg(eq->hwif, EQ_CONS_IDX_REG_ADDR(eq), 0); - hinic_hwif_write_reg(eq->hwif, EQ_PROD_IDX_REG_ADDR(eq), 0); - - eq->cons_idx = 0; - eq->wrapped = 0; - - if (type == HINIC_AEQ) { - eq->elem_size = HINIC_AEQE_SIZE; - } else if (type == HINIC_CEQ) { - eq->elem_size = HINIC_CEQE_SIZE; - } else { - dev_err(&pdev->dev, "Invalid EQ type\n"); - return -EINVAL; - } - - eq->num_pages = GET_EQ_NUM_PAGES(eq, page_size); - eq->num_elem_in_pg = GET_EQ_NUM_ELEMS_IN_PG(eq, page_size); - - eq->msix_entry = entry; - - if (eq->num_elem_in_pg & (eq->num_elem_in_pg - 1)) { - dev_err(&pdev->dev, "num elements in eq page != power of 2\n"); - return -EINVAL; - } - - if (eq->num_pages > EQ_MAX_PAGES) { - dev_err(&pdev->dev, "too many pages for eq\n"); - return -EINVAL; - } - - set_eq_ctrls(eq); - eq_update_ci(eq); - - err = alloc_eq_pages(eq); - if (err) { - dev_err(&pdev->dev, "Failed to allocate pages for eq\n"); - return err; - } - - if (type == HINIC_AEQ) { - struct hinic_eq_work *aeq_work = &eq->aeq_work; - - INIT_WORK(&aeq_work->work, eq_irq_work); - } else if (type == HINIC_CEQ) { - tasklet_init(&eq->ceq_tasklet, ceq_tasklet, - (unsigned long)eq); - } - - /* set the attributes of the msix entry */ - hinic_msix_attr_set(eq->hwif, eq->msix_entry.entry, - HINIC_EQ_MSIX_PENDING_LIMIT_DEFAULT, - HINIC_EQ_MSIX_COALESC_TIMER_DEFAULT, - HINIC_EQ_MSIX_LLI_TIMER_DEFAULT, - HINIC_EQ_MSIX_LLI_CREDIT_LIMIT_DEFAULT, - HINIC_EQ_MSIX_RESEND_TIMER_DEFAULT); - - if (type == HINIC_AEQ) - err = request_irq(entry.vector, aeq_interrupt, 0, - "hinic_aeq", eq); - else if (type == HINIC_CEQ) - err = request_irq(entry.vector, ceq_interrupt, 0, - "hinic_ceq", eq); - - if (err) { - dev_err(&pdev->dev, "Failed to request irq for the EQ\n"); - goto err_req_irq; - } - - return 0; - -err_req_irq: - free_eq_pages(eq); - return err; -} - -/** - * remove_eq - remove Event Queue - * @eq: the event queue - **/ -static void remove_eq(struct hinic_eq *eq) -{ - struct msix_entry *entry = &eq->msix_entry; - - free_irq(entry->vector, eq); - - if (eq->type == HINIC_AEQ) { - struct hinic_eq_work *aeq_work = &eq->aeq_work; - - cancel_work_sync(&aeq_work->work); - } else if (eq->type == HINIC_CEQ) { - tasklet_kill(&eq->ceq_tasklet); - } - - free_eq_pages(eq); -} - -/** - * hinic_aeqs_init - initialize all the aeqs - * @aeqs: pointer to Async eqs of the chip - * @hwif: the HW interface of a PCI function device - * @num_aeqs: number of AEQs - * @q_len: number of EQ elements - * @page_size: the page size of the pages in the event queue - * @msix_entries: msix entries associated with the event queues - * - * Return 0 - Success, negative - Failure - **/ -int hinic_aeqs_init(struct hinic_aeqs *aeqs, struct hinic_hwif *hwif, - int num_aeqs, u32 q_len, u32 page_size, - struct msix_entry *msix_entries) -{ - struct pci_dev *pdev = hwif->pdev; - int err, i, q_id; - - aeqs->workq = create_singlethread_workqueue(HINIC_EQS_WQ_NAME); - if (!aeqs->workq) - return -ENOMEM; - - aeqs->hwif = hwif; - aeqs->num_aeqs = num_aeqs; - - for (q_id = 0; q_id < num_aeqs; q_id++) { - err = init_eq(&aeqs->aeq[q_id], hwif, HINIC_AEQ, q_id, q_len, - page_size, msix_entries[q_id]); - if (err) { - dev_err(&pdev->dev, "Failed to init aeq %d\n", q_id); - goto err_init_aeq; - } - } - - return 0; - -err_init_aeq: - for (i = 0; i < q_id; i++) - remove_eq(&aeqs->aeq[i]); - - destroy_workqueue(aeqs->workq); - return err; -} - -/** - * hinic_aeqs_free - free all the aeqs - * @aeqs: pointer to Async eqs of the chip - **/ -void hinic_aeqs_free(struct hinic_aeqs *aeqs) -{ - int q_id; - - for (q_id = 0; q_id < aeqs->num_aeqs ; q_id++) - remove_eq(&aeqs->aeq[q_id]); - - destroy_workqueue(aeqs->workq); -} - -/** - * hinic_ceqs_init - init all the ceqs - * @ceqs: ceqs part of the chip - * @hwif: the hardware interface of a pci function device - * @num_ceqs: number of CEQs - * @q_len: number of EQ elements - * @page_size: the page size of the event queue - * @msix_entries: msix entries associated with the event queues - * - * Return 0 - Success, Negative - Failure - **/ -int hinic_ceqs_init(struct hinic_ceqs *ceqs, struct hinic_hwif *hwif, - int num_ceqs, u32 q_len, u32 page_size, - struct msix_entry *msix_entries) -{ - struct pci_dev *pdev = hwif->pdev; - int i, q_id, err; - - ceqs->hwif = hwif; - ceqs->num_ceqs = num_ceqs; - - for (q_id = 0; q_id < num_ceqs; q_id++) { - err = init_eq(&ceqs->ceq[q_id], hwif, HINIC_CEQ, q_id, q_len, - page_size, msix_entries[q_id]); - if (err) { - dev_err(&pdev->dev, "Failed to init ceq %d\n", q_id); - goto err_init_ceq; - } - } - - return 0; - -err_init_ceq: - for (i = 0; i < q_id; i++) - remove_eq(&ceqs->ceq[i]); - - return err; -} - -/** - * hinic_ceqs_free - free all the ceqs - * @ceqs: ceqs part of the chip - **/ -void hinic_ceqs_free(struct hinic_ceqs *ceqs) -{ - int q_id; - - for (q_id = 0; q_id < ceqs->num_ceqs; q_id++) - remove_eq(&ceqs->ceq[q_id]); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h deleted file mode 100644 index ecb9c2b..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_eqs.h +++ /dev/null @@ -1,265 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_EQS_H -#define HINIC_HW_EQS_H - -#include <linux/types.h> -#include <linux/workqueue.h> -#include <linux/pci.h> -#include <linux/sizes.h> -#include <linux/bitops.h> -#include <linux/interrupt.h> - -#include "hinic_hw_if.h" - -#define HINIC_AEQ_CTRL_0_INT_IDX_SHIFT 0 -#define HINIC_AEQ_CTRL_0_DMA_ATTR_SHIFT 12 -#define HINIC_AEQ_CTRL_0_PCI_INTF_IDX_SHIFT 20 -#define HINIC_AEQ_CTRL_0_INT_MODE_SHIFT 31 - -#define HINIC_AEQ_CTRL_0_INT_IDX_MASK 0x3FF -#define HINIC_AEQ_CTRL_0_DMA_ATTR_MASK 0x3F -#define HINIC_AEQ_CTRL_0_PCI_INTF_IDX_MASK 0x3 -#define HINIC_AEQ_CTRL_0_INT_MODE_MASK 0x1 - -#define HINIC_AEQ_CTRL_0_SET(val, member) \ - (((u32)(val) & HINIC_AEQ_CTRL_0_##member##_MASK) << \ - HINIC_AEQ_CTRL_0_##member##_SHIFT) - -#define HINIC_AEQ_CTRL_0_CLEAR(val, member) \ - ((val) & (~(HINIC_AEQ_CTRL_0_##member##_MASK \ - << HINIC_AEQ_CTRL_0_##member##_SHIFT))) - -#define HINIC_AEQ_CTRL_1_LEN_SHIFT 0 -#define HINIC_AEQ_CTRL_1_ELEM_SIZE_SHIFT 24 -#define HINIC_AEQ_CTRL_1_PAGE_SIZE_SHIFT 28 - -#define HINIC_AEQ_CTRL_1_LEN_MASK 0x1FFFFF -#define HINIC_AEQ_CTRL_1_ELEM_SIZE_MASK 0x3 -#define HINIC_AEQ_CTRL_1_PAGE_SIZE_MASK 0xF - -#define HINIC_AEQ_CTRL_1_SET(val, member) \ - (((u32)(val) & HINIC_AEQ_CTRL_1_##member##_MASK) << \ - HINIC_AEQ_CTRL_1_##member##_SHIFT) - -#define HINIC_AEQ_CTRL_1_CLEAR(val, member) \ - ((val) & (~(HINIC_AEQ_CTRL_1_##member##_MASK \ - << HINIC_AEQ_CTRL_1_##member##_SHIFT))) - -#define HINIC_CEQ_CTRL_0_INTR_IDX_SHIFT 0 -#define HINIC_CEQ_CTRL_0_DMA_ATTR_SHIFT 12 -#define HINIC_CEQ_CTRL_0_KICK_THRESH_SHIFT 20 -#define HINIC_CEQ_CTRL_0_PCI_INTF_IDX_SHIFT 24 -#define HINIC_CEQ_CTRL_0_INTR_MODE_SHIFT 31 - -#define HINIC_CEQ_CTRL_0_INTR_IDX_MASK 0x3FF -#define HINIC_CEQ_CTRL_0_DMA_ATTR_MASK 0x3F -#define HINIC_CEQ_CTRL_0_KICK_THRESH_MASK 0xF -#define HINIC_CEQ_CTRL_0_PCI_INTF_IDX_MASK 0x3 -#define HINIC_CEQ_CTRL_0_INTR_MODE_MASK 0x1 - -#define HINIC_CEQ_CTRL_0_SET(val, member) \ - (((u32)(val) & HINIC_CEQ_CTRL_0_##member##_MASK) << \ - HINIC_CEQ_CTRL_0_##member##_SHIFT) - -#define HINIC_CEQ_CTRL_0_CLEAR(val, member) \ - ((val) & (~(HINIC_CEQ_CTRL_0_##member##_MASK \ - << HINIC_CEQ_CTRL_0_##member##_SHIFT))) - -#define HINIC_CEQ_CTRL_1_LEN_SHIFT 0 -#define HINIC_CEQ_CTRL_1_PAGE_SIZE_SHIFT 28 - -#define HINIC_CEQ_CTRL_1_LEN_MASK 0x1FFFFF -#define HINIC_CEQ_CTRL_1_PAGE_SIZE_MASK 0xF - -#define HINIC_CEQ_CTRL_1_SET(val, member) \ - (((u32)(val) & HINIC_CEQ_CTRL_1_##member##_MASK) << \ - HINIC_CEQ_CTRL_1_##member##_SHIFT) - -#define HINIC_CEQ_CTRL_1_CLEAR(val, member) \ - ((val) & (~(HINIC_CEQ_CTRL_1_##member##_MASK \ - << HINIC_CEQ_CTRL_1_##member##_SHIFT))) - -#define HINIC_EQ_ELEM_DESC_TYPE_SHIFT 0 -#define HINIC_EQ_ELEM_DESC_SRC_SHIFT 7 -#define HINIC_EQ_ELEM_DESC_SIZE_SHIFT 8 -#define HINIC_EQ_ELEM_DESC_WRAPPED_SHIFT 31 - -#define HINIC_EQ_ELEM_DESC_TYPE_MASK 0x7F -#define HINIC_EQ_ELEM_DESC_SRC_MASK 0x1 -#define HINIC_EQ_ELEM_DESC_SIZE_MASK 0xFF -#define HINIC_EQ_ELEM_DESC_WRAPPED_MASK 0x1 - -#define HINIC_EQ_ELEM_DESC_SET(val, member) \ - (((u32)(val) & HINIC_EQ_ELEM_DESC_##member##_MASK) << \ - HINIC_EQ_ELEM_DESC_##member##_SHIFT) - -#define HINIC_EQ_ELEM_DESC_GET(val, member) \ - (((val) >> HINIC_EQ_ELEM_DESC_##member##_SHIFT) & \ - HINIC_EQ_ELEM_DESC_##member##_MASK) - -#define HINIC_EQ_CI_IDX_SHIFT 0 -#define HINIC_EQ_CI_WRAPPED_SHIFT 20 -#define HINIC_EQ_CI_XOR_CHKSUM_SHIFT 24 -#define HINIC_EQ_CI_INT_ARMED_SHIFT 31 - -#define HINIC_EQ_CI_IDX_MASK 0xFFFFF -#define HINIC_EQ_CI_WRAPPED_MASK 0x1 -#define HINIC_EQ_CI_XOR_CHKSUM_MASK 0xF -#define HINIC_EQ_CI_INT_ARMED_MASK 0x1 - -#define HINIC_EQ_CI_SET(val, member) \ - (((u32)(val) & HINIC_EQ_CI_##member##_MASK) << \ - HINIC_EQ_CI_##member##_SHIFT) - -#define HINIC_EQ_CI_CLEAR(val, member) \ - ((val) & (~(HINIC_EQ_CI_##member##_MASK \ - << HINIC_EQ_CI_##member##_SHIFT))) - -#define HINIC_MAX_AEQS 4 -#define HINIC_MAX_CEQS 32 - -#define HINIC_AEQE_SIZE 64 -#define HINIC_CEQE_SIZE 4 - -#define HINIC_AEQE_DESC_SIZE 4 -#define HINIC_AEQE_DATA_SIZE \ - (HINIC_AEQE_SIZE - HINIC_AEQE_DESC_SIZE) - -#define HINIC_DEFAULT_AEQ_LEN 64 -#define HINIC_DEFAULT_CEQ_LEN 1024 - -#define HINIC_EQ_PAGE_SIZE SZ_4K - -#define HINIC_CEQ_ID_CMDQ 0 - -enum hinic_eq_type { - HINIC_AEQ, - HINIC_CEQ, -}; - -enum hinic_aeq_type { - HINIC_MSG_FROM_MGMT_CPU = 2, - - HINIC_MAX_AEQ_EVENTS, -}; - -enum hinic_ceq_type { - HINIC_CEQ_CMDQ = 3, - - HINIC_MAX_CEQ_EVENTS, -}; - -enum hinic_eqe_state { - HINIC_EQE_ENABLED = BIT(0), - HINIC_EQE_RUNNING = BIT(1), -}; - -struct hinic_aeq_elem { - u8 data[HINIC_AEQE_DATA_SIZE]; - u32 desc; -}; - -struct hinic_eq_work { - struct work_struct work; - void *data; -}; - -struct hinic_eq { - struct hinic_hwif *hwif; - - enum hinic_eq_type type; - int q_id; - u32 q_len; - u32 page_size; - - u32 cons_idx; - int wrapped; - - size_t elem_size; - int num_pages; - int num_elem_in_pg; - - struct msix_entry msix_entry; - - dma_addr_t *dma_addr; - void **virt_addr; - - struct hinic_eq_work aeq_work; - - struct tasklet_struct ceq_tasklet; -}; - -struct hinic_hw_event_cb { - void (*hwe_handler)(void *handle, void *data, u8 size); - void *handle; - unsigned long hwe_state; -}; - -struct hinic_aeqs { - struct hinic_hwif *hwif; - - struct hinic_eq aeq[HINIC_MAX_AEQS]; - int num_aeqs; - - struct hinic_hw_event_cb hwe_cb[HINIC_MAX_AEQ_EVENTS]; - - struct workqueue_struct *workq; -}; - -struct hinic_ceq_cb { - void (*handler)(void *handle, u32 ceqe_data); - void *handle; - enum hinic_eqe_state ceqe_state; -}; - -struct hinic_ceqs { - struct hinic_hwif *hwif; - - struct hinic_eq ceq[HINIC_MAX_CEQS]; - int num_ceqs; - - struct hinic_ceq_cb ceq_cb[HINIC_MAX_CEQ_EVENTS]; -}; - -void hinic_aeq_register_hw_cb(struct hinic_aeqs *aeqs, - enum hinic_aeq_type event, void *handle, - void (*hwe_handler)(void *handle, void *data, - u8 size)); - -void hinic_aeq_unregister_hw_cb(struct hinic_aeqs *aeqs, - enum hinic_aeq_type event); - -void hinic_ceq_register_cb(struct hinic_ceqs *ceqs, - enum hinic_ceq_type event, void *handle, - void (*ceq_cb)(void *handle, u32 ceqe_data)); - -void hinic_ceq_unregister_cb(struct hinic_ceqs *ceqs, - enum hinic_ceq_type event); - -int hinic_aeqs_init(struct hinic_aeqs *aeqs, struct hinic_hwif *hwif, - int num_aeqs, u32 q_len, u32 page_size, - struct msix_entry *msix_entries); - -void hinic_aeqs_free(struct hinic_aeqs *aeqs); - -int hinic_ceqs_init(struct hinic_ceqs *ceqs, struct hinic_hwif *hwif, - int num_ceqs, u32 q_len, u32 page_size, - struct msix_entry *msix_entries); - -void hinic_ceqs_free(struct hinic_ceqs *ceqs); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c deleted file mode 100644 index 823a170..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.c +++ /dev/null @@ -1,351 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include "hinic_hw_csr.h" -#include "hinic_hw_if.h" - -#define PCIE_ATTR_ENTRY 0 - -#define VALID_MSIX_IDX(attr, msix_index) ((msix_index) < (attr)->num_irqs) - -/** - * hinic_msix_attr_set - set message attribute for msix entry - * @hwif: the HW interface of a pci function device - * @msix_index: msix_index - * @pending_limit: the maximum pending interrupt events (unit 8) - * @coalesc_timer: coalesc period for interrupt (unit 8 us) - * @lli_timer: replenishing period for low latency credit (unit 8 us) - * @lli_credit_limit: maximum credits for low latency msix messages (unit 8) - * @resend_timer: maximum wait for resending msix (unit coalesc period) - * - * Return 0 - Success, negative - Failure - **/ -int hinic_msix_attr_set(struct hinic_hwif *hwif, u16 msix_index, - u8 pending_limit, u8 coalesc_timer, - u8 lli_timer, u8 lli_credit_limit, - u8 resend_timer) -{ - u32 msix_ctrl, addr; - - if (!VALID_MSIX_IDX(&hwif->attr, msix_index)) - return -EINVAL; - - msix_ctrl = HINIC_MSIX_ATTR_SET(pending_limit, PENDING_LIMIT) | - HINIC_MSIX_ATTR_SET(coalesc_timer, COALESC_TIMER) | - HINIC_MSIX_ATTR_SET(lli_timer, LLI_TIMER) | - HINIC_MSIX_ATTR_SET(lli_credit_limit, LLI_CREDIT) | - HINIC_MSIX_ATTR_SET(resend_timer, RESEND_TIMER); - - addr = HINIC_CSR_MSIX_CTRL_ADDR(msix_index); - - hinic_hwif_write_reg(hwif, addr, msix_ctrl); - return 0; -} - -/** - * hinic_msix_attr_get - get message attribute of msix entry - * @hwif: the HW interface of a pci function device - * @msix_index: msix_index - * @pending_limit: the maximum pending interrupt events (unit 8) - * @coalesc_timer: coalesc period for interrupt (unit 8 us) - * @lli_timer: replenishing period for low latency credit (unit 8 us) - * @lli_credit_limit: maximum credits for low latency msix messages (unit 8) - * @resend_timer: maximum wait for resending msix (unit coalesc period) - * - * Return 0 - Success, negative - Failure - **/ -int hinic_msix_attr_get(struct hinic_hwif *hwif, u16 msix_index, - u8 *pending_limit, u8 *coalesc_timer, - u8 *lli_timer, u8 *lli_credit_limit, - u8 *resend_timer) -{ - u32 addr, val; - - if (!VALID_MSIX_IDX(&hwif->attr, msix_index)) - return -EINVAL; - - addr = HINIC_CSR_MSIX_CTRL_ADDR(msix_index); - val = hinic_hwif_read_reg(hwif, addr); - - *pending_limit = HINIC_MSIX_ATTR_GET(val, PENDING_LIMIT); - *coalesc_timer = HINIC_MSIX_ATTR_GET(val, COALESC_TIMER); - *lli_timer = HINIC_MSIX_ATTR_GET(val, LLI_TIMER); - *lli_credit_limit = HINIC_MSIX_ATTR_GET(val, LLI_CREDIT); - *resend_timer = HINIC_MSIX_ATTR_GET(val, RESEND_TIMER); - return 0; -} - -/** - * hinic_msix_attr_cnt_clear - clear message attribute counters for msix entry - * @hwif: the HW interface of a pci function device - * @msix_index: msix_index - * - * Return 0 - Success, negative - Failure - **/ -int hinic_msix_attr_cnt_clear(struct hinic_hwif *hwif, u16 msix_index) -{ - u32 msix_ctrl, addr; - - if (!VALID_MSIX_IDX(&hwif->attr, msix_index)) - return -EINVAL; - - msix_ctrl = HINIC_MSIX_CNT_SET(1, RESEND_TIMER); - addr = HINIC_CSR_MSIX_CNT_ADDR(msix_index); - - hinic_hwif_write_reg(hwif, addr, msix_ctrl); - return 0; -} - -/** - * hinic_set_pf_action - set action on pf channel - * @hwif: the HW interface of a pci function device - * @action: action on pf channel - * - * Return 0 - Success, negative - Failure - **/ -void hinic_set_pf_action(struct hinic_hwif *hwif, enum hinic_pf_action action) -{ - u32 attr5 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR5_ADDR); - - attr5 = HINIC_FA5_CLEAR(attr5, PF_ACTION); - attr5 |= HINIC_FA5_SET(action, PF_ACTION); - - hinic_hwif_write_reg(hwif, HINIC_CSR_FUNC_ATTR5_ADDR, attr5); -} - -enum hinic_outbound_state hinic_outbound_state_get(struct hinic_hwif *hwif) -{ - u32 attr4 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR); - - return HINIC_FA4_GET(attr4, OUTBOUND_STATE); -} - -void hinic_outbound_state_set(struct hinic_hwif *hwif, - enum hinic_outbound_state outbound_state) -{ - u32 attr4 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR); - - attr4 = HINIC_FA4_CLEAR(attr4, OUTBOUND_STATE); - attr4 |= HINIC_FA4_SET(outbound_state, OUTBOUND_STATE); - - hinic_hwif_write_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR, attr4); -} - -enum hinic_db_state hinic_db_state_get(struct hinic_hwif *hwif) -{ - u32 attr4 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR); - - return HINIC_FA4_GET(attr4, DB_STATE); -} - -void hinic_db_state_set(struct hinic_hwif *hwif, - enum hinic_db_state db_state) -{ - u32 attr4 = hinic_hwif_read_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR); - - attr4 = HINIC_FA4_CLEAR(attr4, DB_STATE); - attr4 |= HINIC_FA4_SET(db_state, DB_STATE); - - hinic_hwif_write_reg(hwif, HINIC_CSR_FUNC_ATTR4_ADDR, attr4); -} - -/** - * hwif_ready - test if the HW is ready for use - * @hwif: the HW interface of a pci function device - * - * Return 0 - Success, negative - Failure - **/ -static int hwif_ready(struct hinic_hwif *hwif) -{ - struct pci_dev *pdev = hwif->pdev; - u32 addr, attr1; - - addr = HINIC_CSR_FUNC_ATTR1_ADDR; - attr1 = hinic_hwif_read_reg(hwif, addr); - - if (!HINIC_FA1_GET(attr1, INIT_STATUS)) { - dev_err(&pdev->dev, "hwif status is not ready\n"); - return -EFAULT; - } - - return 0; -} - -/** - * set_hwif_attr - set the attributes in the relevant members in hwif - * @hwif: the HW interface of a pci function device - * @attr0: the first attribute that was read from the hw - * @attr1: the second attribute that was read from the hw - **/ -static void set_hwif_attr(struct hinic_hwif *hwif, u32 attr0, u32 attr1) -{ - hwif->attr.func_idx = HINIC_FA0_GET(attr0, FUNC_IDX); - hwif->attr.pf_idx = HINIC_FA0_GET(attr0, PF_IDX); - hwif->attr.pci_intf_idx = HINIC_FA0_GET(attr0, PCI_INTF_IDX); - hwif->attr.func_type = HINIC_FA0_GET(attr0, FUNC_TYPE); - - hwif->attr.num_aeqs = BIT(HINIC_FA1_GET(attr1, AEQS_PER_FUNC)); - hwif->attr.num_ceqs = BIT(HINIC_FA1_GET(attr1, CEQS_PER_FUNC)); - hwif->attr.num_irqs = BIT(HINIC_FA1_GET(attr1, IRQS_PER_FUNC)); - hwif->attr.num_dma_attr = BIT(HINIC_FA1_GET(attr1, DMA_ATTR_PER_FUNC)); -} - -/** - * read_hwif_attr - read the attributes and set members in hwif - * @hwif: the HW interface of a pci function device - **/ -static void read_hwif_attr(struct hinic_hwif *hwif) -{ - u32 addr, attr0, attr1; - - addr = HINIC_CSR_FUNC_ATTR0_ADDR; - attr0 = hinic_hwif_read_reg(hwif, addr); - - addr = HINIC_CSR_FUNC_ATTR1_ADDR; - attr1 = hinic_hwif_read_reg(hwif, addr); - - set_hwif_attr(hwif, attr0, attr1); -} - -/** - * set_ppf - try to set hwif as ppf and set the type of hwif in this case - * @hwif: the HW interface of a pci function device - **/ -static void set_ppf(struct hinic_hwif *hwif) -{ - struct hinic_func_attr *attr = &hwif->attr; - u32 addr, val, ppf_election; - - /* Read Modify Write */ - addr = HINIC_CSR_PPF_ELECTION_ADDR(HINIC_HWIF_PCI_INTF(hwif)); - - val = hinic_hwif_read_reg(hwif, addr); - val = HINIC_PPF_ELECTION_CLEAR(val, IDX); - - ppf_election = HINIC_PPF_ELECTION_SET(HINIC_HWIF_FUNC_IDX(hwif), IDX); - - val |= ppf_election; - hinic_hwif_write_reg(hwif, addr, val); - - /* check PPF */ - val = hinic_hwif_read_reg(hwif, addr); - - attr->ppf_idx = HINIC_PPF_ELECTION_GET(val, IDX); - if (attr->ppf_idx == HINIC_HWIF_FUNC_IDX(hwif)) - attr->func_type = HINIC_PPF; -} - -/** - * set_dma_attr - set the dma attributes in the HW - * @hwif: the HW interface of a pci function device - * @entry_idx: the entry index in the dma table - * @st: PCIE TLP steering tag - * @at: PCIE TLP AT field - * @ph: PCIE TLP Processing Hint field - * @no_snooping: PCIE TLP No snooping - * @tph_en: PCIE TLP Processing Hint Enable - **/ -static void set_dma_attr(struct hinic_hwif *hwif, u32 entry_idx, - u8 st, u8 at, u8 ph, - enum hinic_pcie_nosnoop no_snooping, - enum hinic_pcie_tph tph_en) -{ - u32 addr, val, dma_attr_entry; - - /* Read Modify Write */ - addr = HINIC_CSR_DMA_ATTR_ADDR(entry_idx); - - val = hinic_hwif_read_reg(hwif, addr); - val = HINIC_DMA_ATTR_CLEAR(val, ST) & - HINIC_DMA_ATTR_CLEAR(val, AT) & - HINIC_DMA_ATTR_CLEAR(val, PH) & - HINIC_DMA_ATTR_CLEAR(val, NO_SNOOPING) & - HINIC_DMA_ATTR_CLEAR(val, TPH_EN); - - dma_attr_entry = HINIC_DMA_ATTR_SET(st, ST) | - HINIC_DMA_ATTR_SET(at, AT) | - HINIC_DMA_ATTR_SET(ph, PH) | - HINIC_DMA_ATTR_SET(no_snooping, NO_SNOOPING) | - HINIC_DMA_ATTR_SET(tph_en, TPH_EN); - - val |= dma_attr_entry; - hinic_hwif_write_reg(hwif, addr, val); -} - -/** - * dma_attr_table_init - initialize the the default dma attributes - * @hwif: the HW interface of a pci function device - **/ -static void dma_attr_init(struct hinic_hwif *hwif) -{ - set_dma_attr(hwif, PCIE_ATTR_ENTRY, HINIC_PCIE_ST_DISABLE, - HINIC_PCIE_AT_DISABLE, HINIC_PCIE_PH_DISABLE, - HINIC_PCIE_SNOOP, HINIC_PCIE_TPH_DISABLE); -} - -/** - * hinic_init_hwif - initialize the hw interface - * @hwif: the HW interface of a pci function device - * @pdev: the pci device for acessing PCI resources - * - * Return 0 - Success, negative - Failure - **/ -int hinic_init_hwif(struct hinic_hwif *hwif, struct pci_dev *pdev) -{ - int err; - - hwif->pdev = pdev; - - hwif->cfg_regs_bar = pci_ioremap_bar(pdev, HINIC_PCI_CFG_REGS_BAR); - if (!hwif->cfg_regs_bar) { - dev_err(&pdev->dev, "Failed to map configuration regs\n"); - return -ENOMEM; - } - - err = hwif_ready(hwif); - if (err) { - dev_err(&pdev->dev, "HW interface is not ready\n"); - goto err_hwif_ready; - } - - read_hwif_attr(hwif); - - if (HINIC_IS_PF(hwif)) - set_ppf(hwif); - - /* No transactionss before DMA is initialized */ - dma_attr_init(hwif); - return 0; - -err_hwif_ready: - iounmap(hwif->cfg_regs_bar); - return err; -} - -/** - * hinic_free_hwif - free the HW interface - * @hwif: the HW interface of a pci function device - **/ -void hinic_free_hwif(struct hinic_hwif *hwif) -{ - iounmap(hwif->cfg_regs_bar); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h deleted file mode 100644 index 5b4760c..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_if.h +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_IF_H -#define HINIC_HW_IF_H - -#include <linux/pci.h> -#include <linux/io.h> -#include <linux/types.h> -#include <asm/byteorder.h> - -#define HINIC_DMA_ATTR_ST_SHIFT 0 -#define HINIC_DMA_ATTR_AT_SHIFT 8 -#define HINIC_DMA_ATTR_PH_SHIFT 10 -#define HINIC_DMA_ATTR_NO_SNOOPING_SHIFT 12 -#define HINIC_DMA_ATTR_TPH_EN_SHIFT 13 - -#define HINIC_DMA_ATTR_ST_MASK 0xFF -#define HINIC_DMA_ATTR_AT_MASK 0x3 -#define HINIC_DMA_ATTR_PH_MASK 0x3 -#define HINIC_DMA_ATTR_NO_SNOOPING_MASK 0x1 -#define HINIC_DMA_ATTR_TPH_EN_MASK 0x1 - -#define HINIC_DMA_ATTR_SET(val, member) \ - (((u32)(val) & HINIC_DMA_ATTR_##member##_MASK) << \ - HINIC_DMA_ATTR_##member##_SHIFT) - -#define HINIC_DMA_ATTR_CLEAR(val, member) \ - ((val) & (~(HINIC_DMA_ATTR_##member##_MASK \ - << HINIC_DMA_ATTR_##member##_SHIFT))) - -#define HINIC_FA0_FUNC_IDX_SHIFT 0 -#define HINIC_FA0_PF_IDX_SHIFT 10 -#define HINIC_FA0_PCI_INTF_IDX_SHIFT 14 -/* reserved members - off 16 */ -#define HINIC_FA0_FUNC_TYPE_SHIFT 24 - -#define HINIC_FA0_FUNC_IDX_MASK 0x3FF -#define HINIC_FA0_PF_IDX_MASK 0xF -#define HINIC_FA0_PCI_INTF_IDX_MASK 0x3 -#define HINIC_FA0_FUNC_TYPE_MASK 0x1 - -#define HINIC_FA0_GET(val, member) \ - (((val) >> HINIC_FA0_##member##_SHIFT) & HINIC_FA0_##member##_MASK) - -#define HINIC_FA1_AEQS_PER_FUNC_SHIFT 8 -/* reserved members - off 10 */ -#define HINIC_FA1_CEQS_PER_FUNC_SHIFT 12 -/* reserved members - off 15 */ -#define HINIC_FA1_IRQS_PER_FUNC_SHIFT 20 -#define HINIC_FA1_DMA_ATTR_PER_FUNC_SHIFT 24 -/* reserved members - off 27 */ -#define HINIC_FA1_INIT_STATUS_SHIFT 30 - -#define HINIC_FA1_AEQS_PER_FUNC_MASK 0x3 -#define HINIC_FA1_CEQS_PER_FUNC_MASK 0x7 -#define HINIC_FA1_IRQS_PER_FUNC_MASK 0xF -#define HINIC_FA1_DMA_ATTR_PER_FUNC_MASK 0x7 -#define HINIC_FA1_INIT_STATUS_MASK 0x1 - -#define HINIC_FA1_GET(val, member) \ - (((val) >> HINIC_FA1_##member##_SHIFT) & HINIC_FA1_##member##_MASK) - -#define HINIC_FA4_OUTBOUND_STATE_SHIFT 0 -#define HINIC_FA4_DB_STATE_SHIFT 1 - -#define HINIC_FA4_OUTBOUND_STATE_MASK 0x1 -#define HINIC_FA4_DB_STATE_MASK 0x1 - -#define HINIC_FA4_GET(val, member) \ - (((val) >> HINIC_FA4_##member##_SHIFT) & HINIC_FA4_##member##_MASK) - -#define HINIC_FA4_SET(val, member) \ - ((((u32)val) & HINIC_FA4_##member##_MASK) << HINIC_FA4_##member##_SHIFT) - -#define HINIC_FA4_CLEAR(val, member) \ - ((val) & (~(HINIC_FA4_##member##_MASK << HINIC_FA4_##member##_SHIFT))) - -#define HINIC_FA5_PF_ACTION_SHIFT 0 -#define HINIC_FA5_PF_ACTION_MASK 0xFFFF - -#define HINIC_FA5_SET(val, member) \ - (((u32)(val) & HINIC_FA5_##member##_MASK) << HINIC_FA5_##member##_SHIFT) - -#define HINIC_FA5_CLEAR(val, member) \ - ((val) & (~(HINIC_FA5_##member##_MASK << HINIC_FA5_##member##_SHIFT))) - -#define HINIC_PPF_ELECTION_IDX_SHIFT 0 -#define HINIC_PPF_ELECTION_IDX_MASK 0x1F - -#define HINIC_PPF_ELECTION_SET(val, member) \ - (((u32)(val) & HINIC_PPF_ELECTION_##member##_MASK) << \ - HINIC_PPF_ELECTION_##member##_SHIFT) - -#define HINIC_PPF_ELECTION_GET(val, member) \ - (((val) >> HINIC_PPF_ELECTION_##member##_SHIFT) & \ - HINIC_PPF_ELECTION_##member##_MASK) - -#define HINIC_PPF_ELECTION_CLEAR(val, member) \ - ((val) & (~(HINIC_PPF_ELECTION_##member##_MASK \ - << HINIC_PPF_ELECTION_##member##_SHIFT))) - -#define HINIC_MSIX_PENDING_LIMIT_SHIFT 0 -#define HINIC_MSIX_COALESC_TIMER_SHIFT 8 -#define HINIC_MSIX_LLI_TIMER_SHIFT 16 -#define HINIC_MSIX_LLI_CREDIT_SHIFT 24 -#define HINIC_MSIX_RESEND_TIMER_SHIFT 29 - -#define HINIC_MSIX_PENDING_LIMIT_MASK 0xFF -#define HINIC_MSIX_COALESC_TIMER_MASK 0xFF -#define HINIC_MSIX_LLI_TIMER_MASK 0xFF -#define HINIC_MSIX_LLI_CREDIT_MASK 0x1F -#define HINIC_MSIX_RESEND_TIMER_MASK 0x7 - -#define HINIC_MSIX_ATTR_SET(val, member) \ - (((u32)(val) & HINIC_MSIX_##member##_MASK) << \ - HINIC_MSIX_##member##_SHIFT) - -#define HINIC_MSIX_ATTR_GET(val, member) \ - (((val) >> HINIC_MSIX_##member##_SHIFT) & \ - HINIC_MSIX_##member##_MASK) - -#define HINIC_MSIX_CNT_RESEND_TIMER_SHIFT 29 - -#define HINIC_MSIX_CNT_RESEND_TIMER_MASK 0x1 - -#define HINIC_MSIX_CNT_SET(val, member) \ - (((u32)(val) & HINIC_MSIX_CNT_##member##_MASK) << \ - HINIC_MSIX_CNT_##member##_SHIFT) - -#define HINIC_HWIF_NUM_AEQS(hwif) ((hwif)->attr.num_aeqs) -#define HINIC_HWIF_NUM_CEQS(hwif) ((hwif)->attr.num_ceqs) -#define HINIC_HWIF_NUM_IRQS(hwif) ((hwif)->attr.num_irqs) -#define HINIC_HWIF_FUNC_IDX(hwif) ((hwif)->attr.func_idx) -#define HINIC_HWIF_PCI_INTF(hwif) ((hwif)->attr.pci_intf_idx) -#define HINIC_HWIF_PF_IDX(hwif) ((hwif)->attr.pf_idx) - -#define HINIC_FUNC_TYPE(hwif) ((hwif)->attr.func_type) -#define HINIC_IS_PF(hwif) (HINIC_FUNC_TYPE(hwif) == HINIC_PF) -#define HINIC_IS_PPF(hwif) (HINIC_FUNC_TYPE(hwif) == HINIC_PPF) - -#define HINIC_PCI_CFG_REGS_BAR 0 -#define HINIC_PCI_DB_BAR 4 - -#define HINIC_PCIE_ST_DISABLE 0 -#define HINIC_PCIE_AT_DISABLE 0 -#define HINIC_PCIE_PH_DISABLE 0 - -#define HINIC_EQ_MSIX_PENDING_LIMIT_DEFAULT 0 /* Disabled */ -#define HINIC_EQ_MSIX_COALESC_TIMER_DEFAULT 0xFF /* max */ -#define HINIC_EQ_MSIX_LLI_TIMER_DEFAULT 0 /* Disabled */ -#define HINIC_EQ_MSIX_LLI_CREDIT_LIMIT_DEFAULT 0 /* Disabled */ -#define HINIC_EQ_MSIX_RESEND_TIMER_DEFAULT 7 /* max */ - -enum hinic_pcie_nosnoop { - HINIC_PCIE_SNOOP = 0, - HINIC_PCIE_NO_SNOOP = 1, -}; - -enum hinic_pcie_tph { - HINIC_PCIE_TPH_DISABLE = 0, - HINIC_PCIE_TPH_ENABLE = 1, -}; - -enum hinic_func_type { - HINIC_PF = 0, - HINIC_PPF = 2, -}; - -enum hinic_mod_type { - HINIC_MOD_COMM = 0, /* HW communication module */ - HINIC_MOD_L2NIC = 1, /* L2NIC module */ - HINIC_MOD_CFGM = 7, /* Configuration module */ - - HINIC_MOD_MAX = 15 -}; - -enum hinic_node_id { - HINIC_NODE_ID_MGMT = 21, -}; - -enum hinic_pf_action { - HINIC_PF_MGMT_INIT = 0x0, - - HINIC_PF_MGMT_ACTIVE = 0x11, -}; - -enum hinic_outbound_state { - HINIC_OUTBOUND_ENABLE = 0, - HINIC_OUTBOUND_DISABLE = 1, -}; - -enum hinic_db_state { - HINIC_DB_ENABLE = 0, - HINIC_DB_DISABLE = 1, -}; - -struct hinic_func_attr { - u16 func_idx; - u8 pf_idx; - u8 pci_intf_idx; - - enum hinic_func_type func_type; - - u8 ppf_idx; - - u16 num_irqs; - u8 num_aeqs; - u8 num_ceqs; - - u8 num_dma_attr; -}; - -struct hinic_hwif { - struct pci_dev *pdev; - void __iomem *cfg_regs_bar; - - struct hinic_func_attr attr; -}; - -static inline u32 hinic_hwif_read_reg(struct hinic_hwif *hwif, u32 reg) -{ - return be32_to_cpu(readl(hwif->cfg_regs_bar + reg)); -} - -static inline void hinic_hwif_write_reg(struct hinic_hwif *hwif, u32 reg, - u32 val) -{ - writel(cpu_to_be32(val), hwif->cfg_regs_bar + reg); -} - -int hinic_msix_attr_set(struct hinic_hwif *hwif, u16 msix_index, - u8 pending_limit, u8 coalesc_timer, - u8 lli_timer_cfg, u8 lli_credit_limit, - u8 resend_timer); - -int hinic_msix_attr_get(struct hinic_hwif *hwif, u16 msix_index, - u8 *pending_limit, u8 *coalesc_timer_cfg, - u8 *lli_timer, u8 *lli_credit_limit, - u8 *resend_timer); - -int hinic_msix_attr_cnt_clear(struct hinic_hwif *hwif, u16 msix_index); - -void hinic_set_pf_action(struct hinic_hwif *hwif, enum hinic_pf_action action); - -enum hinic_outbound_state hinic_outbound_state_get(struct hinic_hwif *hwif); - -void hinic_outbound_state_set(struct hinic_hwif *hwif, - enum hinic_outbound_state outbound_state); - -enum hinic_db_state hinic_db_state_get(struct hinic_hwif *hwif); - -void hinic_db_state_set(struct hinic_hwif *hwif, - enum hinic_db_state db_state); - -int hinic_init_hwif(struct hinic_hwif *hwif, struct pci_dev *pdev); - -void hinic_free_hwif(struct hinic_hwif *hwif); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c deleted file mode 100644 index 8e58976..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.c +++ /dev/null @@ -1,533 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <linux/semaphore.h> -#include <linux/dma-mapping.h> -#include <linux/io.h> -#include <linux/err.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_wqe.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_cmdq.h" -#include "hinic_hw_qp_ctxt.h" -#include "hinic_hw_qp.h" -#include "hinic_hw_io.h" - -#define CI_Q_ADDR_SIZE sizeof(u32) - -#define CI_ADDR(base_addr, q_id) ((base_addr) + \ - (q_id) * CI_Q_ADDR_SIZE) - -#define CI_TABLE_SIZE(num_qps) ((num_qps) * CI_Q_ADDR_SIZE) - -#define DB_IDX(db, db_base) \ - (((unsigned long)(db) - (unsigned long)(db_base)) / HINIC_DB_PAGE_SIZE) - -enum io_cmd { - IO_CMD_MODIFY_QUEUE_CTXT = 0, -}; - -static void init_db_area_idx(struct hinic_free_db_area *free_db_area) -{ - int i; - - for (i = 0; i < HINIC_DB_MAX_AREAS; i++) - free_db_area->db_idx[i] = i; - - free_db_area->alloc_pos = 0; - free_db_area->return_pos = HINIC_DB_MAX_AREAS; - - free_db_area->num_free = HINIC_DB_MAX_AREAS; - - sema_init(&free_db_area->idx_lock, 1); -} - -static void __iomem *get_db_area(struct hinic_func_to_io *func_to_io) -{ - struct hinic_free_db_area *free_db_area = &func_to_io->free_db_area; - int pos, idx; - - down(&free_db_area->idx_lock); - - free_db_area->num_free--; - - if (free_db_area->num_free < 0) { - free_db_area->num_free++; - up(&free_db_area->idx_lock); - return ERR_PTR(-ENOMEM); - } - - pos = free_db_area->alloc_pos++; - pos &= HINIC_DB_MAX_AREAS - 1; - - idx = free_db_area->db_idx[pos]; - - free_db_area->db_idx[pos] = -1; - - up(&free_db_area->idx_lock); - - return func_to_io->db_base + idx * HINIC_DB_PAGE_SIZE; -} - -static void return_db_area(struct hinic_func_to_io *func_to_io, - void __iomem *db_base) -{ - struct hinic_free_db_area *free_db_area = &func_to_io->free_db_area; - int pos, idx = DB_IDX(db_base, func_to_io->db_base); - - down(&free_db_area->idx_lock); - - pos = free_db_area->return_pos++; - pos &= HINIC_DB_MAX_AREAS - 1; - - free_db_area->db_idx[pos] = idx; - - free_db_area->num_free++; - - up(&free_db_area->idx_lock); -} - -static int write_sq_ctxts(struct hinic_func_to_io *func_to_io, u16 base_qpn, - u16 num_sqs) -{ - struct hinic_hwif *hwif = func_to_io->hwif; - struct hinic_sq_ctxt_block *sq_ctxt_block; - struct pci_dev *pdev = hwif->pdev; - struct hinic_cmdq_buf cmdq_buf; - struct hinic_sq_ctxt *sq_ctxt; - struct hinic_qp *qp; - u64 out_param; - int err, i; - - err = hinic_alloc_cmdq_buf(&func_to_io->cmdqs, &cmdq_buf); - if (err) { - dev_err(&pdev->dev, "Failed to allocate cmdq buf\n"); - return err; - } - - sq_ctxt_block = cmdq_buf.buf; - sq_ctxt = sq_ctxt_block->sq_ctxt; - - hinic_qp_prepare_header(&sq_ctxt_block->hdr, HINIC_QP_CTXT_TYPE_SQ, - num_sqs, func_to_io->max_qps); - for (i = 0; i < num_sqs; i++) { - qp = &func_to_io->qps[i]; - - hinic_sq_prepare_ctxt(&sq_ctxt[i], &qp->sq, - base_qpn + qp->q_id); - } - - cmdq_buf.size = HINIC_SQ_CTXT_SIZE(num_sqs); - - err = hinic_cmdq_direct_resp(&func_to_io->cmdqs, HINIC_MOD_L2NIC, - IO_CMD_MODIFY_QUEUE_CTXT, &cmdq_buf, - &out_param); - if ((err) || (out_param != 0)) { - dev_err(&pdev->dev, "Failed to set SQ ctxts\n"); - err = -EFAULT; - } - - hinic_free_cmdq_buf(&func_to_io->cmdqs, &cmdq_buf); - return err; -} - -static int write_rq_ctxts(struct hinic_func_to_io *func_to_io, u16 base_qpn, - u16 num_rqs) -{ - struct hinic_hwif *hwif = func_to_io->hwif; - struct hinic_rq_ctxt_block *rq_ctxt_block; - struct pci_dev *pdev = hwif->pdev; - struct hinic_cmdq_buf cmdq_buf; - struct hinic_rq_ctxt *rq_ctxt; - struct hinic_qp *qp; - u64 out_param; - int err, i; - - err = hinic_alloc_cmdq_buf(&func_to_io->cmdqs, &cmdq_buf); - if (err) { - dev_err(&pdev->dev, "Failed to allocate cmdq buf\n"); - return err; - } - - rq_ctxt_block = cmdq_buf.buf; - rq_ctxt = rq_ctxt_block->rq_ctxt; - - hinic_qp_prepare_header(&rq_ctxt_block->hdr, HINIC_QP_CTXT_TYPE_RQ, - num_rqs, func_to_io->max_qps); - for (i = 0; i < num_rqs; i++) { - qp = &func_to_io->qps[i]; - - hinic_rq_prepare_ctxt(&rq_ctxt[i], &qp->rq, - base_qpn + qp->q_id); - } - - cmdq_buf.size = HINIC_RQ_CTXT_SIZE(num_rqs); - - err = hinic_cmdq_direct_resp(&func_to_io->cmdqs, HINIC_MOD_L2NIC, - IO_CMD_MODIFY_QUEUE_CTXT, &cmdq_buf, - &out_param); - if ((err) || (out_param != 0)) { - dev_err(&pdev->dev, "Failed to set RQ ctxts\n"); - err = -EFAULT; - } - - hinic_free_cmdq_buf(&func_to_io->cmdqs, &cmdq_buf); - return err; -} - -/** - * write_qp_ctxts - write the qp ctxt to HW - * @func_to_io: func to io channel that holds the IO components - * @base_qpn: first qp number - * @num_qps: number of qps to write - * - * Return 0 - Success, negative - Failure - **/ -static int write_qp_ctxts(struct hinic_func_to_io *func_to_io, u16 base_qpn, - u16 num_qps) -{ - return (write_sq_ctxts(func_to_io, base_qpn, num_qps) || - write_rq_ctxts(func_to_io, base_qpn, num_qps)); -} - -/** - * init_qp - Initialize a Queue Pair - * @func_to_io: func to io channel that holds the IO components - * @qp: pointer to the qp to initialize - * @q_id: the id of the qp - * @sq_msix_entry: msix entry for sq - * @rq_msix_entry: msix entry for rq - * - * Return 0 - Success, negative - Failure - **/ -static int init_qp(struct hinic_func_to_io *func_to_io, - struct hinic_qp *qp, int q_id, - struct msix_entry *sq_msix_entry, - struct msix_entry *rq_msix_entry) -{ - struct hinic_hwif *hwif = func_to_io->hwif; - struct pci_dev *pdev = hwif->pdev; - void __iomem *db_base; - int err; - - qp->q_id = q_id; - - err = hinic_wq_allocate(&func_to_io->wqs, &func_to_io->sq_wq[q_id], - HINIC_SQ_WQEBB_SIZE, HINIC_SQ_PAGE_SIZE, - HINIC_SQ_DEPTH, HINIC_SQ_WQE_MAX_SIZE); - if (err) { - dev_err(&pdev->dev, "Failed to allocate WQ for SQ\n"); - return err; - } - - err = hinic_wq_allocate(&func_to_io->wqs, &func_to_io->rq_wq[q_id], - HINIC_RQ_WQEBB_SIZE, HINIC_RQ_PAGE_SIZE, - HINIC_RQ_DEPTH, HINIC_RQ_WQE_SIZE); - if (err) { - dev_err(&pdev->dev, "Failed to allocate WQ for RQ\n"); - goto err_rq_alloc; - } - - db_base = get_db_area(func_to_io); - if (IS_ERR(db_base)) { - dev_err(&pdev->dev, "Failed to get DB area for SQ\n"); - err = PTR_ERR(db_base); - goto err_get_db; - } - - func_to_io->sq_db[q_id] = db_base; - - err = hinic_init_sq(&qp->sq, hwif, &func_to_io->sq_wq[q_id], - sq_msix_entry, - CI_ADDR(func_to_io->ci_addr_base, q_id), - CI_ADDR(func_to_io->ci_dma_base, q_id), db_base); - if (err) { - dev_err(&pdev->dev, "Failed to init SQ\n"); - goto err_sq_init; - } - - err = hinic_init_rq(&qp->rq, hwif, &func_to_io->rq_wq[q_id], - rq_msix_entry); - if (err) { - dev_err(&pdev->dev, "Failed to init RQ\n"); - goto err_rq_init; - } - - return 0; - -err_rq_init: - hinic_clean_sq(&qp->sq); - -err_sq_init: - return_db_area(func_to_io, db_base); - -err_get_db: - hinic_wq_free(&func_to_io->wqs, &func_to_io->rq_wq[q_id]); - -err_rq_alloc: - hinic_wq_free(&func_to_io->wqs, &func_to_io->sq_wq[q_id]); - return err; -} - -/** - * destroy_qp - Clean the resources of a Queue Pair - * @func_to_io: func to io channel that holds the IO components - * @qp: pointer to the qp to clean - **/ -static void destroy_qp(struct hinic_func_to_io *func_to_io, - struct hinic_qp *qp) -{ - int q_id = qp->q_id; - - hinic_clean_rq(&qp->rq); - hinic_clean_sq(&qp->sq); - - return_db_area(func_to_io, func_to_io->sq_db[q_id]); - - hinic_wq_free(&func_to_io->wqs, &func_to_io->rq_wq[q_id]); - hinic_wq_free(&func_to_io->wqs, &func_to_io->sq_wq[q_id]); -} - -/** - * hinic_io_create_qps - Create Queue Pairs - * @func_to_io: func to io channel that holds the IO components - * @base_qpn: base qp number - * @num_qps: number queue pairs to create - * @sq_msix_entry: msix entries for sq - * @rq_msix_entry: msix entries for rq - * - * Return 0 - Success, negative - Failure - **/ -int hinic_io_create_qps(struct hinic_func_to_io *func_to_io, - u16 base_qpn, int num_qps, - struct msix_entry *sq_msix_entries, - struct msix_entry *rq_msix_entries) -{ - struct hinic_hwif *hwif = func_to_io->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t qps_size, wq_size, db_size; - void *ci_addr_base; - int i, j, err; - - qps_size = num_qps * sizeof(*func_to_io->qps); - func_to_io->qps = devm_kzalloc(&pdev->dev, qps_size, GFP_KERNEL); - if (!func_to_io->qps) - return -ENOMEM; - - wq_size = num_qps * sizeof(*func_to_io->sq_wq); - func_to_io->sq_wq = devm_kzalloc(&pdev->dev, wq_size, GFP_KERNEL); - if (!func_to_io->sq_wq) { - err = -ENOMEM; - goto err_sq_wq; - } - - wq_size = num_qps * sizeof(*func_to_io->rq_wq); - func_to_io->rq_wq = devm_kzalloc(&pdev->dev, wq_size, GFP_KERNEL); - if (!func_to_io->rq_wq) { - err = -ENOMEM; - goto err_rq_wq; - } - - db_size = num_qps * sizeof(*func_to_io->sq_db); - func_to_io->sq_db = devm_kzalloc(&pdev->dev, db_size, GFP_KERNEL); - if (!func_to_io->sq_db) { - err = -ENOMEM; - goto err_sq_db; - } - - ci_addr_base = dma_zalloc_coherent(&pdev->dev, CI_TABLE_SIZE(num_qps), - &func_to_io->ci_dma_base, - GFP_KERNEL); - if (!ci_addr_base) { - dev_err(&pdev->dev, "Failed to allocate CI area\n"); - err = -ENOMEM; - goto err_ci_base; - } - - func_to_io->ci_addr_base = ci_addr_base; - - for (i = 0; i < num_qps; i++) { - err = init_qp(func_to_io, &func_to_io->qps[i], i, - &sq_msix_entries[i], &rq_msix_entries[i]); - if (err) { - dev_err(&pdev->dev, "Failed to create QP %d\n", i); - goto err_init_qp; - } - } - - err = write_qp_ctxts(func_to_io, base_qpn, num_qps); - if (err) { - dev_err(&pdev->dev, "Failed to init QP ctxts\n"); - goto err_write_qp_ctxts; - } - - return 0; - -err_write_qp_ctxts: -err_init_qp: - for (j = 0; j < i; j++) - destroy_qp(func_to_io, &func_to_io->qps[j]); - - dma_free_coherent(&pdev->dev, CI_TABLE_SIZE(num_qps), - func_to_io->ci_addr_base, func_to_io->ci_dma_base); - -err_ci_base: - devm_kfree(&pdev->dev, func_to_io->sq_db); - -err_sq_db: - devm_kfree(&pdev->dev, func_to_io->rq_wq); - -err_rq_wq: - devm_kfree(&pdev->dev, func_to_io->sq_wq); - -err_sq_wq: - devm_kfree(&pdev->dev, func_to_io->qps); - return err; -} - -/** - * hinic_io_destroy_qps - Destroy the IO Queue Pairs - * @func_to_io: func to io channel that holds the IO components - * @num_qps: number queue pairs to destroy - **/ -void hinic_io_destroy_qps(struct hinic_func_to_io *func_to_io, int num_qps) -{ - struct hinic_hwif *hwif = func_to_io->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t ci_table_size; - int i; - - ci_table_size = CI_TABLE_SIZE(num_qps); - - for (i = 0; i < num_qps; i++) - destroy_qp(func_to_io, &func_to_io->qps[i]); - - dma_free_coherent(&pdev->dev, ci_table_size, func_to_io->ci_addr_base, - func_to_io->ci_dma_base); - - devm_kfree(&pdev->dev, func_to_io->sq_db); - - devm_kfree(&pdev->dev, func_to_io->rq_wq); - devm_kfree(&pdev->dev, func_to_io->sq_wq); - - devm_kfree(&pdev->dev, func_to_io->qps); -} - -/** - * hinic_io_init - Initialize the IO components - * @func_to_io: func to io channel that holds the IO components - * @hwif: HW interface for accessing IO - * @max_qps: maximum QPs in HW - * @num_ceqs: number completion event queues - * @ceq_msix_entries: msix entries for ceqs - * - * Return 0 - Success, negative - Failure - **/ -int hinic_io_init(struct hinic_func_to_io *func_to_io, - struct hinic_hwif *hwif, u16 max_qps, int num_ceqs, - struct msix_entry *ceq_msix_entries) -{ - struct pci_dev *pdev = hwif->pdev; - enum hinic_cmdq_type cmdq, type; - void __iomem *db_area; - int err; - - func_to_io->hwif = hwif; - func_to_io->qps = NULL; - func_to_io->max_qps = max_qps; - - err = hinic_ceqs_init(&func_to_io->ceqs, hwif, num_ceqs, - HINIC_DEFAULT_CEQ_LEN, HINIC_EQ_PAGE_SIZE, - ceq_msix_entries); - if (err) { - dev_err(&pdev->dev, "Failed to init CEQs\n"); - return err; - } - - err = hinic_wqs_alloc(&func_to_io->wqs, 2 * max_qps, hwif); - if (err) { - dev_err(&pdev->dev, "Failed to allocate WQS for IO\n"); - goto err_wqs_alloc; - } - - func_to_io->db_base = pci_ioremap_bar(pdev, HINIC_PCI_DB_BAR); - if (!func_to_io->db_base) { - dev_err(&pdev->dev, "Failed to remap IO DB area\n"); - err = -ENOMEM; - goto err_db_ioremap; - } - - init_db_area_idx(&func_to_io->free_db_area); - - for (cmdq = HINIC_CMDQ_SYNC; cmdq < HINIC_MAX_CMDQ_TYPES; cmdq++) { - db_area = get_db_area(func_to_io); - if (IS_ERR(db_area)) { - dev_err(&pdev->dev, "Failed to get cmdq db area\n"); - err = PTR_ERR(db_area); - goto err_db_area; - } - - func_to_io->cmdq_db_area[cmdq] = db_area; - } - - err = hinic_init_cmdqs(&func_to_io->cmdqs, hwif, - func_to_io->cmdq_db_area); - if (err) { - dev_err(&pdev->dev, "Failed to initialize cmdqs\n"); - goto err_init_cmdqs; - } - - return 0; - -err_init_cmdqs: -err_db_area: - for (type = HINIC_CMDQ_SYNC; type < cmdq; type++) - return_db_area(func_to_io, func_to_io->cmdq_db_area[type]); - - iounmap(func_to_io->db_base); - -err_db_ioremap: - hinic_wqs_free(&func_to_io->wqs); - -err_wqs_alloc: - hinic_ceqs_free(&func_to_io->ceqs); - return err; -} - -/** - * hinic_io_free - Free the IO components - * @func_to_io: func to io channel that holds the IO components - **/ -void hinic_io_free(struct hinic_func_to_io *func_to_io) -{ - enum hinic_cmdq_type cmdq; - - hinic_free_cmdqs(&func_to_io->cmdqs); - - for (cmdq = HINIC_CMDQ_SYNC; cmdq < HINIC_MAX_CMDQ_TYPES; cmdq++) - return_db_area(func_to_io, func_to_io->cmdq_db_area[cmdq]); - - iounmap(func_to_io->db_base); - hinic_wqs_free(&func_to_io->wqs); - hinic_ceqs_free(&func_to_io->ceqs); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h deleted file mode 100644 index adb6417..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_io.h +++ /dev/null @@ -1,97 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_IO_H -#define HINIC_HW_IO_H - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/semaphore.h> -#include <linux/sizes.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_cmdq.h" -#include "hinic_hw_qp.h" - -#define HINIC_DB_PAGE_SIZE SZ_4K -#define HINIC_DB_SIZE SZ_4M - -#define HINIC_DB_MAX_AREAS (HINIC_DB_SIZE / HINIC_DB_PAGE_SIZE) - -enum hinic_db_type { - HINIC_DB_CMDQ_TYPE, - HINIC_DB_SQ_TYPE, -}; - -enum hinic_io_path { - HINIC_CTRL_PATH, - HINIC_DATA_PATH, -}; - -struct hinic_free_db_area { - int db_idx[HINIC_DB_MAX_AREAS]; - - int alloc_pos; - int return_pos; - - int num_free; - - /* Lock for getting db area */ - struct semaphore idx_lock; -}; - -struct hinic_func_to_io { - struct hinic_hwif *hwif; - - struct hinic_ceqs ceqs; - - struct hinic_wqs wqs; - - struct hinic_wq *sq_wq; - struct hinic_wq *rq_wq; - - struct hinic_qp *qps; - u16 max_qps; - - void __iomem **sq_db; - void __iomem *db_base; - - void *ci_addr_base; - dma_addr_t ci_dma_base; - - struct hinic_free_db_area free_db_area; - - void __iomem *cmdq_db_area[HINIC_MAX_CMDQ_TYPES]; - - struct hinic_cmdqs cmdqs; -}; - -int hinic_io_create_qps(struct hinic_func_to_io *func_to_io, - u16 base_qpn, int num_qps, - struct msix_entry *sq_msix_entries, - struct msix_entry *rq_msix_entries); - -void hinic_io_destroy_qps(struct hinic_func_to_io *func_to_io, - int num_qps); - -int hinic_io_init(struct hinic_func_to_io *func_to_io, - struct hinic_hwif *hwif, u16 max_qps, int num_ceqs, - struct msix_entry *ceq_msix_entries); - -void hinic_io_free(struct hinic_func_to_io *func_to_io); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c deleted file mode 100644 index 278dc13..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c +++ /dev/null @@ -1,597 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/semaphore.h> -#include <linux/completion.h> -#include <linux/slab.h> -#include <asm/barrier.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_eqs.h" -#include "hinic_hw_api_cmd.h" -#include "hinic_hw_mgmt.h" -#include "hinic_hw_dev.h" - -#define SYNC_MSG_ID_MASK 0x1FF - -#define SYNC_MSG_ID(pf_to_mgmt) ((pf_to_mgmt)->sync_msg_id) - -#define SYNC_MSG_ID_INC(pf_to_mgmt) (SYNC_MSG_ID(pf_to_mgmt) = \ - ((SYNC_MSG_ID(pf_to_mgmt) + 1) & \ - SYNC_MSG_ID_MASK)) - -#define MSG_SZ_IS_VALID(in_size) ((in_size) <= MAX_MSG_LEN) - -#define MGMT_MSG_LEN_MIN 20 -#define MGMT_MSG_LEN_STEP 16 -#define MGMT_MSG_RSVD_FOR_DEV 8 - -#define SEGMENT_LEN 48 - -#define MAX_PF_MGMT_BUF_SIZE 2048 - -/* Data should be SEG LEN size aligned */ -#define MAX_MSG_LEN 2016 - -#define MSG_NOT_RESP 0xFFFF - -#define MGMT_MSG_TIMEOUT 1000 - -#define mgmt_to_pfhwdev(pf_mgmt) \ - container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt) - -enum msg_segment_type { - NOT_LAST_SEGMENT = 0, - LAST_SEGMENT = 1, -}; - -enum mgmt_direction_type { - MGMT_DIRECT_SEND = 0, - MGMT_RESP = 1, -}; - -enum msg_ack_type { - MSG_ACK = 0, - MSG_NO_ACK = 1, -}; - -/** - * hinic_register_mgmt_msg_cb - register msg handler for a msg from a module - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that this handler will handle its messages - * @handle: private data for the callback - * @callback: the handler that will handle messages - **/ -void hinic_register_mgmt_msg_cb(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod, - void *handle, - void (*callback)(void *handle, - u8 cmd, void *buf_in, - u16 in_size, void *buf_out, - u16 *out_size)) -{ - struct hinic_mgmt_cb *mgmt_cb = &pf_to_mgmt->mgmt_cb[mod]; - - mgmt_cb->cb = callback; - mgmt_cb->handle = handle; - mgmt_cb->state = HINIC_MGMT_CB_ENABLED; -} - -/** - * hinic_unregister_mgmt_msg_cb - unregister msg handler for a msg from a module - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that this handler handles its messages - **/ -void hinic_unregister_mgmt_msg_cb(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod) -{ - struct hinic_mgmt_cb *mgmt_cb = &pf_to_mgmt->mgmt_cb[mod]; - - mgmt_cb->state &= ~HINIC_MGMT_CB_ENABLED; - - while (mgmt_cb->state & HINIC_MGMT_CB_RUNNING) - schedule(); - - mgmt_cb->cb = NULL; -} - -/** - * prepare_header - prepare the header of the message - * @pf_to_mgmt: PF to MGMT channel - * @msg_len: the length of the message - * @mod: module in the chip that will get the message - * @ack_type: ask for response - * @direction: the direction of the message - * @cmd: command of the message - * @msg_id: message id - * - * Return the prepared header value - **/ -static u64 prepare_header(struct hinic_pf_to_mgmt *pf_to_mgmt, - u16 msg_len, enum hinic_mod_type mod, - enum msg_ack_type ack_type, - enum mgmt_direction_type direction, - u16 cmd, u16 msg_id) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - - return HINIC_MSG_HEADER_SET(msg_len, MSG_LEN) | - HINIC_MSG_HEADER_SET(mod, MODULE) | - HINIC_MSG_HEADER_SET(SEGMENT_LEN, SEG_LEN) | - HINIC_MSG_HEADER_SET(ack_type, NO_ACK) | - HINIC_MSG_HEADER_SET(0, ASYNC_MGMT_TO_PF) | - HINIC_MSG_HEADER_SET(0, SEQID) | - HINIC_MSG_HEADER_SET(LAST_SEGMENT, LAST) | - HINIC_MSG_HEADER_SET(direction, DIRECTION) | - HINIC_MSG_HEADER_SET(cmd, CMD) | - HINIC_MSG_HEADER_SET(HINIC_HWIF_PCI_INTF(hwif), PCI_INTF) | - HINIC_MSG_HEADER_SET(HINIC_HWIF_PF_IDX(hwif), PF_IDX) | - HINIC_MSG_HEADER_SET(msg_id, MSG_ID); -} - -/** - * prepare_mgmt_cmd - prepare the mgmt command - * @mgmt_cmd: pointer to the command to prepare - * @header: pointer of the header for the message - * @msg: the data of the message - * @msg_len: the length of the message - **/ -static void prepare_mgmt_cmd(u8 *mgmt_cmd, u64 *header, u8 *msg, u16 msg_len) -{ - memset(mgmt_cmd, 0, MGMT_MSG_RSVD_FOR_DEV); - - mgmt_cmd += MGMT_MSG_RSVD_FOR_DEV; - memcpy(mgmt_cmd, header, sizeof(*header)); - - mgmt_cmd += sizeof(*header); - memcpy(mgmt_cmd, msg, msg_len); -} - -/** - * mgmt_msg_len - calculate the total message length - * @msg_data_len: the length of the message data - * - * Return the total message length - **/ -static u16 mgmt_msg_len(u16 msg_data_len) -{ - /* RSVD + HEADER_SIZE + DATA_LEN */ - u16 msg_len = MGMT_MSG_RSVD_FOR_DEV + sizeof(u64) + msg_data_len; - - if (msg_len > MGMT_MSG_LEN_MIN) - msg_len = MGMT_MSG_LEN_MIN + - ALIGN((msg_len - MGMT_MSG_LEN_MIN), - MGMT_MSG_LEN_STEP); - else - msg_len = MGMT_MSG_LEN_MIN; - - return msg_len; -} - -/** - * send_msg_to_mgmt - send message to mgmt by API CMD - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that will get the message - * @cmd: command of the message - * @data: the msg data - * @data_len: the msg data length - * @ack_type: ask for response - * @direction: the direction of the original message - * @resp_msg_id: msg id to response for - * - * Return 0 - Success, negative - Failure - **/ -static int send_msg_to_mgmt(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod, u8 cmd, - u8 *data, u16 data_len, - enum msg_ack_type ack_type, - enum mgmt_direction_type direction, - u16 resp_msg_id) -{ - struct hinic_api_cmd_chain *chain; - u64 header; - u16 msg_id; - - msg_id = SYNC_MSG_ID(pf_to_mgmt); - - if (direction == MGMT_RESP) { - header = prepare_header(pf_to_mgmt, data_len, mod, ack_type, - direction, cmd, resp_msg_id); - } else { - SYNC_MSG_ID_INC(pf_to_mgmt); - header = prepare_header(pf_to_mgmt, data_len, mod, ack_type, - direction, cmd, msg_id); - } - - prepare_mgmt_cmd(pf_to_mgmt->sync_msg_buf, &header, data, data_len); - - chain = pf_to_mgmt->cmd_chain[HINIC_API_CMD_WRITE_TO_MGMT_CPU]; - return hinic_api_cmd_write(chain, HINIC_NODE_ID_MGMT, - pf_to_mgmt->sync_msg_buf, - mgmt_msg_len(data_len)); -} - -/** - * msg_to_mgmt_sync - send sync message to mgmt - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that will get the message - * @cmd: command of the message - * @buf_in: the msg data - * @in_size: the msg data length - * @buf_out: response - * @out_size: response length - * @direction: the direction of the original message - * @resp_msg_id: msg id to response for - * - * Return 0 - Success, negative - Failure - **/ -static int msg_to_mgmt_sync(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod, u8 cmd, - u8 *buf_in, u16 in_size, - u8 *buf_out, u16 *out_size, - enum mgmt_direction_type direction, - u16 resp_msg_id) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_recv_msg *recv_msg; - struct completion *recv_done; - u16 msg_id; - int err; - - /* Lock the sync_msg_buf */ - down(&pf_to_mgmt->sync_msg_lock); - - recv_msg = &pf_to_mgmt->recv_resp_msg_from_mgmt; - recv_done = &recv_msg->recv_done; - - if (resp_msg_id == MSG_NOT_RESP) - msg_id = SYNC_MSG_ID(pf_to_mgmt); - else - msg_id = resp_msg_id; - - init_completion(recv_done); - - err = send_msg_to_mgmt(pf_to_mgmt, mod, cmd, buf_in, in_size, - MSG_ACK, direction, resp_msg_id); - if (err) { - dev_err(&pdev->dev, "Failed to send sync msg to mgmt\n"); - goto unlock_sync_msg; - } - - if (!wait_for_completion_timeout(recv_done, MGMT_MSG_TIMEOUT)) { - dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id); - err = -ETIMEDOUT; - goto unlock_sync_msg; - } - - smp_rmb(); /* verify reading after completion */ - - if (recv_msg->msg_id != msg_id) { - dev_err(&pdev->dev, "incorrect MSG for id = %d\n", msg_id); - err = -EFAULT; - goto unlock_sync_msg; - } - - if ((buf_out) && (recv_msg->msg_len <= MAX_PF_MGMT_BUF_SIZE)) { - memcpy(buf_out, recv_msg->msg, recv_msg->msg_len); - *out_size = recv_msg->msg_len; - } - -unlock_sync_msg: - up(&pf_to_mgmt->sync_msg_lock); - return err; -} - -/** - * msg_to_mgmt_async - send message to mgmt without response - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that will get the message - * @cmd: command of the message - * @buf_in: the msg data - * @in_size: the msg data length - * @direction: the direction of the original message - * @resp_msg_id: msg id to response for - * - * Return 0 - Success, negative - Failure - **/ -static int msg_to_mgmt_async(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod, u8 cmd, - u8 *buf_in, u16 in_size, - enum mgmt_direction_type direction, - u16 resp_msg_id) -{ - int err; - - /* Lock the sync_msg_buf */ - down(&pf_to_mgmt->sync_msg_lock); - - err = send_msg_to_mgmt(pf_to_mgmt, mod, cmd, buf_in, in_size, - MSG_NO_ACK, direction, resp_msg_id); - - up(&pf_to_mgmt->sync_msg_lock); - return err; -} - -/** - * hinic_msg_to_mgmt - send message to mgmt - * @pf_to_mgmt: PF to MGMT channel - * @mod: module in the chip that will get the message - * @cmd: command of the message - * @buf_in: the msg data - * @in_size: the msg data length - * @buf_out: response - * @out_size: returned response length - * @sync: sync msg or async msg - * - * Return 0 - Success, negative - Failure - **/ -int hinic_msg_to_mgmt(struct hinic_pf_to_mgmt *pf_to_mgmt, - enum hinic_mod_type mod, u8 cmd, - void *buf_in, u16 in_size, void *buf_out, u16 *out_size, - enum hinic_mgmt_msg_type sync) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - - if (sync != HINIC_MGMT_MSG_SYNC) { - dev_err(&pdev->dev, "Invalid MGMT msg type\n"); - return -EINVAL; - } - - if (!MSG_SZ_IS_VALID(in_size)) { - dev_err(&pdev->dev, "Invalid MGMT msg buffer size\n"); - return -EINVAL; - } - - return msg_to_mgmt_sync(pf_to_mgmt, mod, cmd, buf_in, in_size, - buf_out, out_size, MGMT_DIRECT_SEND, - MSG_NOT_RESP); -} - -/** - * mgmt_recv_msg_handler - handler for message from mgmt cpu - * @pf_to_mgmt: PF to MGMT channel - * @recv_msg: received message details - **/ -static void mgmt_recv_msg_handler(struct hinic_pf_to_mgmt *pf_to_mgmt, - struct hinic_recv_msg *recv_msg) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - u8 *buf_out = recv_msg->buf_out; - struct hinic_mgmt_cb *mgmt_cb; - unsigned long cb_state; - u16 out_size = 0; - - if (recv_msg->mod >= HINIC_MOD_MAX) { - dev_err(&pdev->dev, "Unknown MGMT MSG module = %d\n", - recv_msg->mod); - return; - } - - mgmt_cb = &pf_to_mgmt->mgmt_cb[recv_msg->mod]; - - cb_state = cmpxchg(&mgmt_cb->state, - HINIC_MGMT_CB_ENABLED, - HINIC_MGMT_CB_ENABLED | HINIC_MGMT_CB_RUNNING); - - if ((cb_state == HINIC_MGMT_CB_ENABLED) && (mgmt_cb->cb)) - mgmt_cb->cb(mgmt_cb->handle, recv_msg->cmd, - recv_msg->msg, recv_msg->msg_len, - buf_out, &out_size); - else - dev_err(&pdev->dev, "No MGMT msg handler, mod = %d\n", - recv_msg->mod); - - mgmt_cb->state &= ~HINIC_MGMT_CB_RUNNING; - - if (!recv_msg->async_mgmt_to_pf) - /* MGMT sent sync msg, send the response */ - msg_to_mgmt_async(pf_to_mgmt, recv_msg->mod, recv_msg->cmd, - buf_out, out_size, MGMT_RESP, - recv_msg->msg_id); -} - -/** - * mgmt_resp_msg_handler - handler for a response message from mgmt cpu - * @pf_to_mgmt: PF to MGMT channel - * @recv_msg: received message details - **/ -static void mgmt_resp_msg_handler(struct hinic_pf_to_mgmt *pf_to_mgmt, - struct hinic_recv_msg *recv_msg) -{ - wmb(); /* verify writing all, before reading */ - - complete(&recv_msg->recv_done); -} - -/** - * recv_mgmt_msg_handler - handler for a message from mgmt cpu - * @pf_to_mgmt: PF to MGMT channel - * @header: the header of the message - * @recv_msg: received message details - **/ -static void recv_mgmt_msg_handler(struct hinic_pf_to_mgmt *pf_to_mgmt, - u64 *header, struct hinic_recv_msg *recv_msg) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - int seq_id, seg_len; - u8 *msg_body; - - seq_id = HINIC_MSG_HEADER_GET(*header, SEQID); - seg_len = HINIC_MSG_HEADER_GET(*header, SEG_LEN); - - if (seq_id >= (MAX_MSG_LEN / SEGMENT_LEN)) { - dev_err(&pdev->dev, "recv big mgmt msg\n"); - return; - } - - msg_body = (u8 *)header + sizeof(*header); - memcpy(recv_msg->msg + seq_id * SEGMENT_LEN, msg_body, seg_len); - - if (!HINIC_MSG_HEADER_GET(*header, LAST)) - return; - - recv_msg->cmd = HINIC_MSG_HEADER_GET(*header, CMD); - recv_msg->mod = HINIC_MSG_HEADER_GET(*header, MODULE); - recv_msg->async_mgmt_to_pf = HINIC_MSG_HEADER_GET(*header, - ASYNC_MGMT_TO_PF); - recv_msg->msg_len = HINIC_MSG_HEADER_GET(*header, MSG_LEN); - recv_msg->msg_id = HINIC_MSG_HEADER_GET(*header, MSG_ID); - - if (HINIC_MSG_HEADER_GET(*header, DIRECTION) == MGMT_RESP) - mgmt_resp_msg_handler(pf_to_mgmt, recv_msg); - else - mgmt_recv_msg_handler(pf_to_mgmt, recv_msg); -} - -/** - * mgmt_msg_aeqe_handler - handler for a mgmt message event - * @handle: PF to MGMT channel - * @data: the header of the message - * @size: unused - **/ -static void mgmt_msg_aeqe_handler(void *handle, void *data, u8 size) -{ - struct hinic_pf_to_mgmt *pf_to_mgmt = handle; - struct hinic_recv_msg *recv_msg; - u64 *header = (u64 *)data; - - recv_msg = HINIC_MSG_HEADER_GET(*header, DIRECTION) == - MGMT_DIRECT_SEND ? - &pf_to_mgmt->recv_msg_from_mgmt : - &pf_to_mgmt->recv_resp_msg_from_mgmt; - - recv_mgmt_msg_handler(pf_to_mgmt, header, recv_msg); -} - -/** - * alloc_recv_msg - allocate receive message memory - * @pf_to_mgmt: PF to MGMT channel - * @recv_msg: pointer that will hold the allocated data - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_recv_msg(struct hinic_pf_to_mgmt *pf_to_mgmt, - struct hinic_recv_msg *recv_msg) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - - recv_msg->msg = devm_kzalloc(&pdev->dev, MAX_PF_MGMT_BUF_SIZE, - GFP_KERNEL); - if (!recv_msg->msg) - return -ENOMEM; - - recv_msg->buf_out = devm_kzalloc(&pdev->dev, MAX_PF_MGMT_BUF_SIZE, - GFP_KERNEL); - if (!recv_msg->buf_out) - return -ENOMEM; - - return 0; -} - -/** - * alloc_msg_buf - allocate all the message buffers of PF to MGMT channel - * @pf_to_mgmt: PF to MGMT channel - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_msg_buf(struct hinic_pf_to_mgmt *pf_to_mgmt) -{ - struct hinic_hwif *hwif = pf_to_mgmt->hwif; - struct pci_dev *pdev = hwif->pdev; - int err; - - err = alloc_recv_msg(pf_to_mgmt, - &pf_to_mgmt->recv_msg_from_mgmt); - if (err) { - dev_err(&pdev->dev, "Failed to allocate recv msg\n"); - return err; - } - - err = alloc_recv_msg(pf_to_mgmt, - &pf_to_mgmt->recv_resp_msg_from_mgmt); - if (err) { - dev_err(&pdev->dev, "Failed to allocate resp recv msg\n"); - return err; - } - - pf_to_mgmt->sync_msg_buf = devm_kzalloc(&pdev->dev, - MAX_PF_MGMT_BUF_SIZE, - GFP_KERNEL); - if (!pf_to_mgmt->sync_msg_buf) - return -ENOMEM; - - return 0; -} - -/** - * hinic_pf_to_mgmt_init - initialize PF to MGMT channel - * @pf_to_mgmt: PF to MGMT channel - * @hwif: HW interface the PF to MGMT will use for accessing HW - * - * Return 0 - Success, negative - Failure - **/ -int hinic_pf_to_mgmt_init(struct hinic_pf_to_mgmt *pf_to_mgmt, - struct hinic_hwif *hwif) -{ - struct hinic_pfhwdev *pfhwdev = mgmt_to_pfhwdev(pf_to_mgmt); - struct hinic_hwdev *hwdev = &pfhwdev->hwdev; - struct pci_dev *pdev = hwif->pdev; - int err; - - pf_to_mgmt->hwif = hwif; - - sema_init(&pf_to_mgmt->sync_msg_lock, 1); - pf_to_mgmt->sync_msg_id = 0; - - err = alloc_msg_buf(pf_to_mgmt); - if (err) { - dev_err(&pdev->dev, "Failed to allocate msg buffers\n"); - return err; - } - - err = hinic_api_cmd_init(pf_to_mgmt->cmd_chain, hwif); - if (err) { - dev_err(&pdev->dev, "Failed to initialize cmd chains\n"); - return err; - } - - hinic_aeq_register_hw_cb(&hwdev->aeqs, HINIC_MSG_FROM_MGMT_CPU, - pf_to_mgmt, - mgmt_msg_aeqe_handler); - return 0; -} - -/** - * hinic_pf_to_mgmt_free - free PF to MGMT channel - * @pf_to_mgmt: PF to MGMT channel - **/ -void hinic_pf_to_mgmt_free(struct hinic_pf_to_mgmt *pf_to_mgmt) -{ - struct hinic_pfhwdev *pfhwdev = mgmt_to_pfhwdev(pf_to_mgmt); - struct hinic_hwdev *hwdev = &pfhwdev->hwdev; - - hinic_aeq_unregister_hw_cb(&hwdev->aeqs, HINIC_MSG_FROM_MGMT_CPU); - hinic_api_cmd_free(pf_to_mgmt->cmd_chain); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c deleted file mode 100644 index cb23962..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.c +++ /dev/null @@ -1,907 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/vmalloc.h> -#include <linux/errno.h> -#include <linux/sizes.h> -#include <linux/atomic.h> -#include <linux/skbuff.h> -#include <linux/io.h> -#include <asm/barrier.h> -#include <asm/byteorder.h> - -#include "hinic_common.h" -#include "hinic_hw_if.h" -#include "hinic_hw_wqe.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_qp_ctxt.h" -#include "hinic_hw_qp.h" -#include "hinic_hw_io.h" - -#define SQ_DB_OFF SZ_2K - -/* The number of cache line to prefetch Until threshold state */ -#define WQ_PREFETCH_MAX 2 -/* The number of cache line to prefetch After threshold state */ -#define WQ_PREFETCH_MIN 1 -/* Threshold state */ -#define WQ_PREFETCH_THRESHOLD 256 - -/* sizes of the SQ/RQ ctxt */ -#define Q_CTXT_SIZE 48 -#define CTXT_RSVD 240 - -#define SQ_CTXT_OFFSET(max_sqs, max_rqs, q_id) \ - (((max_rqs) + (max_sqs)) * CTXT_RSVD + (q_id) * Q_CTXT_SIZE) - -#define RQ_CTXT_OFFSET(max_sqs, max_rqs, q_id) \ - (((max_rqs) + (max_sqs)) * CTXT_RSVD + \ - (max_sqs + (q_id)) * Q_CTXT_SIZE) - -#define SIZE_16BYTES(size) (ALIGN(size, 16) >> 4) -#define SIZE_8BYTES(size) (ALIGN(size, 8) >> 3) -#define SECT_SIZE_FROM_8BYTES(size) ((size) << 3) - -#define SQ_DB_PI_HI_SHIFT 8 -#define SQ_DB_PI_HI(prod_idx) ((prod_idx) >> SQ_DB_PI_HI_SHIFT) - -#define SQ_DB_PI_LOW_MASK 0xFF -#define SQ_DB_PI_LOW(prod_idx) ((prod_idx) & SQ_DB_PI_LOW_MASK) - -#define SQ_DB_ADDR(sq, pi) ((u64 *)((sq)->db_base) + SQ_DB_PI_LOW(pi)) - -#define SQ_MASKED_IDX(sq, idx) ((idx) & (sq)->wq->mask) -#define RQ_MASKED_IDX(rq, idx) ((idx) & (rq)->wq->mask) - -#define TX_MAX_MSS_DEFAULT 0x3E00 - -enum sq_wqe_type { - SQ_NORMAL_WQE = 0, -}; - -enum rq_completion_fmt { - RQ_COMPLETE_SGE = 1 -}; - -void hinic_qp_prepare_header(struct hinic_qp_ctxt_header *qp_ctxt_hdr, - enum hinic_qp_ctxt_type ctxt_type, - u16 num_queues, u16 max_queues) -{ - u16 max_sqs = max_queues; - u16 max_rqs = max_queues; - - qp_ctxt_hdr->num_queues = num_queues; - qp_ctxt_hdr->queue_type = ctxt_type; - - if (ctxt_type == HINIC_QP_CTXT_TYPE_SQ) - qp_ctxt_hdr->addr_offset = SQ_CTXT_OFFSET(max_sqs, max_rqs, 0); - else - qp_ctxt_hdr->addr_offset = RQ_CTXT_OFFSET(max_sqs, max_rqs, 0); - - qp_ctxt_hdr->addr_offset = SIZE_16BYTES(qp_ctxt_hdr->addr_offset); - - hinic_cpu_to_be32(qp_ctxt_hdr, sizeof(*qp_ctxt_hdr)); -} - -void hinic_sq_prepare_ctxt(struct hinic_sq_ctxt *sq_ctxt, - struct hinic_sq *sq, u16 global_qid) -{ - u32 wq_page_pfn_hi, wq_page_pfn_lo, wq_block_pfn_hi, wq_block_pfn_lo; - u64 wq_page_addr, wq_page_pfn, wq_block_pfn; - u16 pi_start, ci_start; - struct hinic_wq *wq; - - wq = sq->wq; - ci_start = atomic_read(&wq->cons_idx); - pi_start = atomic_read(&wq->prod_idx); - - /* Read the first page paddr from the WQ page paddr ptrs */ - wq_page_addr = be64_to_cpu(*wq->block_vaddr); - - wq_page_pfn = HINIC_WQ_PAGE_PFN(wq_page_addr); - wq_page_pfn_hi = upper_32_bits(wq_page_pfn); - wq_page_pfn_lo = lower_32_bits(wq_page_pfn); - - wq_block_pfn = HINIC_WQ_BLOCK_PFN(wq->block_paddr); - wq_block_pfn_hi = upper_32_bits(wq_block_pfn); - wq_block_pfn_lo = lower_32_bits(wq_block_pfn); - - sq_ctxt->ceq_attr = HINIC_SQ_CTXT_CEQ_ATTR_SET(global_qid, - GLOBAL_SQ_ID) | - HINIC_SQ_CTXT_CEQ_ATTR_SET(0, EN); - - sq_ctxt->ci_wrapped = HINIC_SQ_CTXT_CI_SET(ci_start, IDX) | - HINIC_SQ_CTXT_CI_SET(1, WRAPPED); - - sq_ctxt->wq_hi_pfn_pi = - HINIC_SQ_CTXT_WQ_PAGE_SET(wq_page_pfn_hi, HI_PFN) | - HINIC_SQ_CTXT_WQ_PAGE_SET(pi_start, PI); - - sq_ctxt->wq_lo_pfn = wq_page_pfn_lo; - - sq_ctxt->pref_cache = - HINIC_SQ_CTXT_PREF_SET(WQ_PREFETCH_MIN, CACHE_MIN) | - HINIC_SQ_CTXT_PREF_SET(WQ_PREFETCH_MAX, CACHE_MAX) | - HINIC_SQ_CTXT_PREF_SET(WQ_PREFETCH_THRESHOLD, CACHE_THRESHOLD); - - sq_ctxt->pref_wrapped = 1; - - sq_ctxt->pref_wq_hi_pfn_ci = - HINIC_SQ_CTXT_PREF_SET(ci_start, CI) | - HINIC_SQ_CTXT_PREF_SET(wq_page_pfn_hi, WQ_HI_PFN); - - sq_ctxt->pref_wq_lo_pfn = wq_page_pfn_lo; - - sq_ctxt->wq_block_hi_pfn = - HINIC_SQ_CTXT_WQ_BLOCK_SET(wq_block_pfn_hi, HI_PFN); - - sq_ctxt->wq_block_lo_pfn = wq_block_pfn_lo; - - hinic_cpu_to_be32(sq_ctxt, sizeof(*sq_ctxt)); -} - -void hinic_rq_prepare_ctxt(struct hinic_rq_ctxt *rq_ctxt, - struct hinic_rq *rq, u16 global_qid) -{ - u32 wq_page_pfn_hi, wq_page_pfn_lo, wq_block_pfn_hi, wq_block_pfn_lo; - u64 wq_page_addr, wq_page_pfn, wq_block_pfn; - u16 pi_start, ci_start; - struct hinic_wq *wq; - - wq = rq->wq; - ci_start = atomic_read(&wq->cons_idx); - pi_start = atomic_read(&wq->prod_idx); - - /* Read the first page paddr from the WQ page paddr ptrs */ - wq_page_addr = be64_to_cpu(*wq->block_vaddr); - - wq_page_pfn = HINIC_WQ_PAGE_PFN(wq_page_addr); - wq_page_pfn_hi = upper_32_bits(wq_page_pfn); - wq_page_pfn_lo = lower_32_bits(wq_page_pfn); - - wq_block_pfn = HINIC_WQ_BLOCK_PFN(wq->block_paddr); - wq_block_pfn_hi = upper_32_bits(wq_block_pfn); - wq_block_pfn_lo = lower_32_bits(wq_block_pfn); - - rq_ctxt->ceq_attr = HINIC_RQ_CTXT_CEQ_ATTR_SET(0, EN) | - HINIC_RQ_CTXT_CEQ_ATTR_SET(1, WRAPPED); - - rq_ctxt->pi_intr_attr = HINIC_RQ_CTXT_PI_SET(pi_start, IDX) | - HINIC_RQ_CTXT_PI_SET(rq->msix_entry, INTR); - - rq_ctxt->wq_hi_pfn_ci = HINIC_RQ_CTXT_WQ_PAGE_SET(wq_page_pfn_hi, - HI_PFN) | - HINIC_RQ_CTXT_WQ_PAGE_SET(ci_start, CI); - - rq_ctxt->wq_lo_pfn = wq_page_pfn_lo; - - rq_ctxt->pref_cache = - HINIC_RQ_CTXT_PREF_SET(WQ_PREFETCH_MIN, CACHE_MIN) | - HINIC_RQ_CTXT_PREF_SET(WQ_PREFETCH_MAX, CACHE_MAX) | - HINIC_RQ_CTXT_PREF_SET(WQ_PREFETCH_THRESHOLD, CACHE_THRESHOLD); - - rq_ctxt->pref_wrapped = 1; - - rq_ctxt->pref_wq_hi_pfn_ci = - HINIC_RQ_CTXT_PREF_SET(wq_page_pfn_hi, WQ_HI_PFN) | - HINIC_RQ_CTXT_PREF_SET(ci_start, CI); - - rq_ctxt->pref_wq_lo_pfn = wq_page_pfn_lo; - - rq_ctxt->pi_paddr_hi = upper_32_bits(rq->pi_dma_addr); - rq_ctxt->pi_paddr_lo = lower_32_bits(rq->pi_dma_addr); - - rq_ctxt->wq_block_hi_pfn = - HINIC_RQ_CTXT_WQ_BLOCK_SET(wq_block_pfn_hi, HI_PFN); - - rq_ctxt->wq_block_lo_pfn = wq_block_pfn_lo; - - hinic_cpu_to_be32(rq_ctxt, sizeof(*rq_ctxt)); -} - -/** - * alloc_sq_skb_arr - allocate sq array for saved skb - * @sq: HW Send Queue - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_sq_skb_arr(struct hinic_sq *sq) -{ - struct hinic_wq *wq = sq->wq; - size_t skb_arr_size; - - skb_arr_size = wq->q_depth * sizeof(*sq->saved_skb); - sq->saved_skb = vzalloc(skb_arr_size); - if (!sq->saved_skb) - return -ENOMEM; - - return 0; -} - -/** - * free_sq_skb_arr - free sq array for saved skb - * @sq: HW Send Queue - **/ -static void free_sq_skb_arr(struct hinic_sq *sq) -{ - vfree(sq->saved_skb); -} - -/** - * alloc_rq_skb_arr - allocate rq array for saved skb - * @rq: HW Receive Queue - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_rq_skb_arr(struct hinic_rq *rq) -{ - struct hinic_wq *wq = rq->wq; - size_t skb_arr_size; - - skb_arr_size = wq->q_depth * sizeof(*rq->saved_skb); - rq->saved_skb = vzalloc(skb_arr_size); - if (!rq->saved_skb) - return -ENOMEM; - - return 0; -} - -/** - * free_rq_skb_arr - free rq array for saved skb - * @rq: HW Receive Queue - **/ -static void free_rq_skb_arr(struct hinic_rq *rq) -{ - vfree(rq->saved_skb); -} - -/** - * hinic_init_sq - Initialize HW Send Queue - * @sq: HW Send Queue - * @hwif: HW Interface for accessing HW - * @wq: Work Queue for the data of the SQ - * @entry: msix entry for sq - * @ci_addr: address for reading the current HW consumer index - * @ci_dma_addr: dma address for reading the current HW consumer index - * @db_base: doorbell base address - * - * Return 0 - Success, negative - Failure - **/ -int hinic_init_sq(struct hinic_sq *sq, struct hinic_hwif *hwif, - struct hinic_wq *wq, struct msix_entry *entry, - void *ci_addr, dma_addr_t ci_dma_addr, - void __iomem *db_base) -{ - sq->hwif = hwif; - - sq->wq = wq; - - sq->irq = entry->vector; - sq->msix_entry = entry->entry; - - sq->hw_ci_addr = ci_addr; - sq->hw_ci_dma_addr = ci_dma_addr; - - sq->db_base = db_base + SQ_DB_OFF; - - return alloc_sq_skb_arr(sq); -} - -/** - * hinic_clean_sq - Clean HW Send Queue's Resources - * @sq: Send Queue - **/ -void hinic_clean_sq(struct hinic_sq *sq) -{ - free_sq_skb_arr(sq); -} - -/** - * alloc_rq_cqe - allocate rq completion queue elements - * @rq: HW Receive Queue - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_rq_cqe(struct hinic_rq *rq) -{ - struct hinic_hwif *hwif = rq->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t cqe_dma_size, cqe_size; - struct hinic_wq *wq = rq->wq; - int j, i; - - cqe_size = wq->q_depth * sizeof(*rq->cqe); - rq->cqe = vzalloc(cqe_size); - if (!rq->cqe) - return -ENOMEM; - - cqe_dma_size = wq->q_depth * sizeof(*rq->cqe_dma); - rq->cqe_dma = vzalloc(cqe_dma_size); - if (!rq->cqe_dma) - goto err_cqe_dma_arr_alloc; - - for (i = 0; i < wq->q_depth; i++) { - rq->cqe[i] = dma_zalloc_coherent(&pdev->dev, - sizeof(*rq->cqe[i]), - &rq->cqe_dma[i], GFP_KERNEL); - if (!rq->cqe[i]) - goto err_cqe_alloc; - } - - return 0; - -err_cqe_alloc: - for (j = 0; j < i; j++) - dma_free_coherent(&pdev->dev, sizeof(*rq->cqe[j]), rq->cqe[j], - rq->cqe_dma[j]); - - vfree(rq->cqe_dma); - -err_cqe_dma_arr_alloc: - vfree(rq->cqe); - return -ENOMEM; -} - -/** - * free_rq_cqe - free rq completion queue elements - * @rq: HW Receive Queue - **/ -static void free_rq_cqe(struct hinic_rq *rq) -{ - struct hinic_hwif *hwif = rq->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_wq *wq = rq->wq; - int i; - - for (i = 0; i < wq->q_depth; i++) - dma_free_coherent(&pdev->dev, sizeof(*rq->cqe[i]), rq->cqe[i], - rq->cqe_dma[i]); - - vfree(rq->cqe_dma); - vfree(rq->cqe); -} - -/** - * hinic_init_rq - Initialize HW Receive Queue - * @rq: HW Receive Queue - * @hwif: HW Interface for accessing HW - * @wq: Work Queue for the data of the RQ - * @entry: msix entry for rq - * - * Return 0 - Success, negative - Failure - **/ -int hinic_init_rq(struct hinic_rq *rq, struct hinic_hwif *hwif, - struct hinic_wq *wq, struct msix_entry *entry) -{ - struct pci_dev *pdev = hwif->pdev; - size_t pi_size; - int err; - - rq->hwif = hwif; - - rq->wq = wq; - - rq->irq = entry->vector; - rq->msix_entry = entry->entry; - - rq->buf_sz = HINIC_RX_BUF_SZ; - - err = alloc_rq_skb_arr(rq); - if (err) { - dev_err(&pdev->dev, "Failed to allocate rq priv data\n"); - return err; - } - - err = alloc_rq_cqe(rq); - if (err) { - dev_err(&pdev->dev, "Failed to allocate rq cqe\n"); - goto err_alloc_rq_cqe; - } - - /* HW requirements: Must be at least 32 bit */ - pi_size = ALIGN(sizeof(*rq->pi_virt_addr), sizeof(u32)); - rq->pi_virt_addr = dma_zalloc_coherent(&pdev->dev, pi_size, - &rq->pi_dma_addr, GFP_KERNEL); - if (!rq->pi_virt_addr) { - dev_err(&pdev->dev, "Failed to allocate PI address\n"); - err = -ENOMEM; - goto err_pi_virt; - } - - return 0; - -err_pi_virt: - free_rq_cqe(rq); - -err_alloc_rq_cqe: - free_rq_skb_arr(rq); - return err; -} - -/** - * hinic_clean_rq - Clean HW Receive Queue's Resources - * @rq: HW Receive Queue - **/ -void hinic_clean_rq(struct hinic_rq *rq) -{ - struct hinic_hwif *hwif = rq->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t pi_size; - - pi_size = ALIGN(sizeof(*rq->pi_virt_addr), sizeof(u32)); - dma_free_coherent(&pdev->dev, pi_size, rq->pi_virt_addr, - rq->pi_dma_addr); - - free_rq_cqe(rq); - free_rq_skb_arr(rq); -} - -/** - * hinic_get_sq_free_wqebbs - return number of free wqebbs for use - * @sq: send queue - * - * Return number of free wqebbs - **/ -int hinic_get_sq_free_wqebbs(struct hinic_sq *sq) -{ - struct hinic_wq *wq = sq->wq; - - return atomic_read(&wq->delta) - 1; -} - -/** - * hinic_get_rq_free_wqebbs - return number of free wqebbs for use - * @rq: recv queue - * - * Return number of free wqebbs - **/ -int hinic_get_rq_free_wqebbs(struct hinic_rq *rq) -{ - struct hinic_wq *wq = rq->wq; - - return atomic_read(&wq->delta) - 1; -} - -static void sq_prepare_ctrl(struct hinic_sq_ctrl *ctrl, u16 prod_idx, - int nr_descs) -{ - u32 ctrl_size, task_size, bufdesc_size; - - ctrl_size = SIZE_8BYTES(sizeof(struct hinic_sq_ctrl)); - task_size = SIZE_8BYTES(sizeof(struct hinic_sq_task)); - bufdesc_size = nr_descs * sizeof(struct hinic_sq_bufdesc); - bufdesc_size = SIZE_8BYTES(bufdesc_size); - - ctrl->ctrl_info = HINIC_SQ_CTRL_SET(bufdesc_size, BUFDESC_SECT_LEN) | - HINIC_SQ_CTRL_SET(task_size, TASKSECT_LEN) | - HINIC_SQ_CTRL_SET(SQ_NORMAL_WQE, DATA_FORMAT) | - HINIC_SQ_CTRL_SET(ctrl_size, LEN); - - ctrl->queue_info = HINIC_SQ_CTRL_SET(TX_MAX_MSS_DEFAULT, - QUEUE_INFO_MSS); -} - -static void sq_prepare_task(struct hinic_sq_task *task) -{ - task->pkt_info0 = - HINIC_SQ_TASK_INFO0_SET(0, L2HDR_LEN) | - HINIC_SQ_TASK_INFO0_SET(HINIC_L4_OFF_DISABLE, L4_OFFLOAD) | - HINIC_SQ_TASK_INFO0_SET(HINIC_OUTER_L3TYPE_UNKNOWN, - INNER_L3TYPE) | - HINIC_SQ_TASK_INFO0_SET(HINIC_VLAN_OFF_DISABLE, - VLAN_OFFLOAD) | - HINIC_SQ_TASK_INFO0_SET(HINIC_PKT_NOT_PARSED, PARSE_FLAG); - - task->pkt_info1 = - HINIC_SQ_TASK_INFO1_SET(HINIC_MEDIA_UNKNOWN, MEDIA_TYPE) | - HINIC_SQ_TASK_INFO1_SET(0, INNER_L4_LEN) | - HINIC_SQ_TASK_INFO1_SET(0, INNER_L3_LEN); - - task->pkt_info2 = - HINIC_SQ_TASK_INFO2_SET(0, TUNNEL_L4_LEN) | - HINIC_SQ_TASK_INFO2_SET(0, OUTER_L3_LEN) | - HINIC_SQ_TASK_INFO2_SET(HINIC_TUNNEL_L4TYPE_UNKNOWN, - TUNNEL_L4TYPE) | - HINIC_SQ_TASK_INFO2_SET(HINIC_OUTER_L3TYPE_UNKNOWN, - OUTER_L3TYPE); - - task->ufo_v6_identify = 0; - - task->pkt_info4 = HINIC_SQ_TASK_INFO4_SET(HINIC_L2TYPE_ETH, L2TYPE); - - task->zero_pad = 0; -} - -/** - * hinic_sq_prepare_wqe - prepare wqe before insert to the queue - * @sq: send queue - * @prod_idx: pi value - * @sq_wqe: wqe to prepare - * @sges: sges for use by the wqe for send for buf addresses - * @nr_sges: number of sges - **/ -void hinic_sq_prepare_wqe(struct hinic_sq *sq, u16 prod_idx, - struct hinic_sq_wqe *sq_wqe, struct hinic_sge *sges, - int nr_sges) -{ - int i; - - sq_prepare_ctrl(&sq_wqe->ctrl, prod_idx, nr_sges); - - sq_prepare_task(&sq_wqe->task); - - for (i = 0; i < nr_sges; i++) - sq_wqe->buf_descs[i].sge = sges[i]; -} - -/** - * sq_prepare_db - prepare doorbell to write - * @sq: send queue - * @prod_idx: pi value for the doorbell - * @cos: cos of the doorbell - * - * Return db value - **/ -static u32 sq_prepare_db(struct hinic_sq *sq, u16 prod_idx, unsigned int cos) -{ - struct hinic_qp *qp = container_of(sq, struct hinic_qp, sq); - u8 hi_prod_idx = SQ_DB_PI_HI(SQ_MASKED_IDX(sq, prod_idx)); - - /* Data should be written to HW in Big Endian Format */ - return cpu_to_be32(HINIC_SQ_DB_INFO_SET(hi_prod_idx, PI_HI) | - HINIC_SQ_DB_INFO_SET(HINIC_DB_SQ_TYPE, TYPE) | - HINIC_SQ_DB_INFO_SET(HINIC_DATA_PATH, PATH) | - HINIC_SQ_DB_INFO_SET(cos, COS) | - HINIC_SQ_DB_INFO_SET(qp->q_id, QID)); -} - -/** - * hinic_sq_write_db- write doorbell - * @sq: send queue - * @prod_idx: pi value for the doorbell - * @wqe_size: wqe size - * @cos: cos of the wqe - **/ -void hinic_sq_write_db(struct hinic_sq *sq, u16 prod_idx, unsigned int wqe_size, - unsigned int cos) -{ - struct hinic_wq *wq = sq->wq; - - /* increment prod_idx to the next */ - prod_idx += ALIGN(wqe_size, wq->wqebb_size) / wq->wqebb_size; - - wmb(); /* Write all before the doorbell */ - - writel(sq_prepare_db(sq, prod_idx, cos), SQ_DB_ADDR(sq, prod_idx)); -} - -/** - * hinic_sq_get_wqe - get wqe ptr in the current pi and update the pi - * @sq: sq to get wqe from - * @wqe_size: wqe size - * @prod_idx: returned pi - * - * Return wqe pointer - **/ -struct hinic_sq_wqe *hinic_sq_get_wqe(struct hinic_sq *sq, - unsigned int wqe_size, u16 *prod_idx) -{ - struct hinic_hw_wqe *hw_wqe = hinic_get_wqe(sq->wq, wqe_size, - prod_idx); - - if (IS_ERR(hw_wqe)) - return NULL; - - return &hw_wqe->sq_wqe; -} - -/** - * hinic_sq_write_wqe - write the wqe to the sq - * @sq: send queue - * @prod_idx: pi of the wqe - * @sq_wqe: the wqe to write - * @skb: skb to save - * @wqe_size: the size of the wqe - **/ -void hinic_sq_write_wqe(struct hinic_sq *sq, u16 prod_idx, - struct hinic_sq_wqe *sq_wqe, - struct sk_buff *skb, unsigned int wqe_size) -{ - struct hinic_hw_wqe *hw_wqe = (struct hinic_hw_wqe *)sq_wqe; - - sq->saved_skb[prod_idx] = skb; - - /* The data in the HW should be in Big Endian Format */ - hinic_cpu_to_be32(sq_wqe, wqe_size); - - hinic_write_wqe(sq->wq, hw_wqe, wqe_size); -} - -/** - * hinic_sq_read_wqebb - read wqe ptr in the current ci and update the ci, the - * wqe only have one wqebb - * @sq: send queue - * @skb: return skb that was saved - * @wqe_size: the wqe size ptr - * @cons_idx: consumer index of the wqe - * - * Return wqe in ci position - **/ -struct hinic_sq_wqe *hinic_sq_read_wqebb(struct hinic_sq *sq, - struct sk_buff **skb, - unsigned int *wqe_size, u16 *cons_idx) -{ - struct hinic_hw_wqe *hw_wqe; - struct hinic_sq_wqe *sq_wqe; - struct hinic_sq_ctrl *ctrl; - unsigned int buf_sect_len; - u32 ctrl_info; - - /* read the ctrl section for getting wqe size */ - hw_wqe = hinic_read_wqe(sq->wq, sizeof(*ctrl), cons_idx); - if (IS_ERR(hw_wqe)) - return NULL; - - *skb = sq->saved_skb[*cons_idx]; - - sq_wqe = &hw_wqe->sq_wqe; - ctrl = &sq_wqe->ctrl; - ctrl_info = be32_to_cpu(ctrl->ctrl_info); - buf_sect_len = HINIC_SQ_CTRL_GET(ctrl_info, BUFDESC_SECT_LEN); - - *wqe_size = sizeof(*ctrl) + sizeof(sq_wqe->task); - *wqe_size += SECT_SIZE_FROM_8BYTES(buf_sect_len); - *wqe_size = ALIGN(*wqe_size, sq->wq->wqebb_size); - - return &hw_wqe->sq_wqe; -} - -/** - * hinic_sq_read_wqe - read wqe ptr in the current ci and update the ci - * @sq: send queue - * @skb: return skb that was saved - * @wqe_size: the size of the wqe - * @cons_idx: consumer index of the wqe - * - * Return wqe in ci position - **/ -struct hinic_sq_wqe *hinic_sq_read_wqe(struct hinic_sq *sq, - struct sk_buff **skb, - unsigned int wqe_size, u16 *cons_idx) -{ - struct hinic_hw_wqe *hw_wqe; - - hw_wqe = hinic_read_wqe(sq->wq, wqe_size, cons_idx); - *skb = sq->saved_skb[*cons_idx]; - - return &hw_wqe->sq_wqe; -} - -/** - * hinic_sq_put_wqe - release the ci for new wqes - * @sq: send queue - * @wqe_size: the size of the wqe - **/ -void hinic_sq_put_wqe(struct hinic_sq *sq, unsigned int wqe_size) -{ - hinic_put_wqe(sq->wq, wqe_size); -} - -/** - * hinic_sq_get_sges - get sges from the wqe - * @sq_wqe: wqe to get the sges from its buffer addresses - * @sges: returned sges - * @nr_sges: number sges to return - **/ -void hinic_sq_get_sges(struct hinic_sq_wqe *sq_wqe, struct hinic_sge *sges, - int nr_sges) -{ - int i; - - for (i = 0; i < nr_sges && i < HINIC_MAX_SQ_BUFDESCS; i++) { - sges[i] = sq_wqe->buf_descs[i].sge; - hinic_be32_to_cpu(&sges[i], sizeof(sges[i])); - } -} - -/** - * hinic_rq_get_wqe - get wqe ptr in the current pi and update the pi - * @rq: rq to get wqe from - * @wqe_size: wqe size - * @prod_idx: returned pi - * - * Return wqe pointer - **/ -struct hinic_rq_wqe *hinic_rq_get_wqe(struct hinic_rq *rq, - unsigned int wqe_size, u16 *prod_idx) -{ - struct hinic_hw_wqe *hw_wqe = hinic_get_wqe(rq->wq, wqe_size, - prod_idx); - - if (IS_ERR(hw_wqe)) - return NULL; - - return &hw_wqe->rq_wqe; -} - -/** - * hinic_rq_write_wqe - write the wqe to the rq - * @rq: recv queue - * @prod_idx: pi of the wqe - * @rq_wqe: the wqe to write - * @skb: skb to save - **/ -void hinic_rq_write_wqe(struct hinic_rq *rq, u16 prod_idx, - struct hinic_rq_wqe *rq_wqe, struct sk_buff *skb) -{ - struct hinic_hw_wqe *hw_wqe = (struct hinic_hw_wqe *)rq_wqe; - - rq->saved_skb[prod_idx] = skb; - - /* The data in the HW should be in Big Endian Format */ - hinic_cpu_to_be32(rq_wqe, sizeof(*rq_wqe)); - - hinic_write_wqe(rq->wq, hw_wqe, sizeof(*rq_wqe)); -} - -/** - * hinic_rq_read_wqe - read wqe ptr in the current ci and update the ci - * @rq: recv queue - * @wqe_size: the size of the wqe - * @skb: return saved skb - * @cons_idx: consumer index of the wqe - * - * Return wqe in ci position - **/ -struct hinic_rq_wqe *hinic_rq_read_wqe(struct hinic_rq *rq, - unsigned int wqe_size, - struct sk_buff **skb, u16 *cons_idx) -{ - struct hinic_hw_wqe *hw_wqe; - struct hinic_rq_cqe *cqe; - int rx_done; - u32 status; - - hw_wqe = hinic_read_wqe(rq->wq, wqe_size, cons_idx); - if (IS_ERR(hw_wqe)) - return NULL; - - cqe = rq->cqe[*cons_idx]; - - status = be32_to_cpu(cqe->status); - - rx_done = HINIC_RQ_CQE_STATUS_GET(status, RXDONE); - if (!rx_done) - return NULL; - - *skb = rq->saved_skb[*cons_idx]; - - return &hw_wqe->rq_wqe; -} - -/** - * hinic_rq_read_next_wqe - increment ci and read the wqe in ci position - * @rq: recv queue - * @wqe_size: the size of the wqe - * @skb: return saved skb - * @cons_idx: consumer index in the wq - * - * Return wqe in incremented ci position - **/ -struct hinic_rq_wqe *hinic_rq_read_next_wqe(struct hinic_rq *rq, - unsigned int wqe_size, - struct sk_buff **skb, - u16 *cons_idx) -{ - struct hinic_wq *wq = rq->wq; - struct hinic_hw_wqe *hw_wqe; - unsigned int num_wqebbs; - - wqe_size = ALIGN(wqe_size, wq->wqebb_size); - num_wqebbs = wqe_size / wq->wqebb_size; - - *cons_idx = RQ_MASKED_IDX(rq, *cons_idx + num_wqebbs); - - *skb = rq->saved_skb[*cons_idx]; - - hw_wqe = hinic_read_wqe_direct(wq, *cons_idx); - - return &hw_wqe->rq_wqe; -} - -/** - * hinic_put_wqe - release the ci for new wqes - * @rq: recv queue - * @cons_idx: consumer index of the wqe - * @wqe_size: the size of the wqe - **/ -void hinic_rq_put_wqe(struct hinic_rq *rq, u16 cons_idx, - unsigned int wqe_size) -{ - struct hinic_rq_cqe *cqe = rq->cqe[cons_idx]; - u32 status = be32_to_cpu(cqe->status); - - status = HINIC_RQ_CQE_STATUS_CLEAR(status, RXDONE); - - /* Rx WQE size is 1 WQEBB, no wq shadow*/ - cqe->status = cpu_to_be32(status); - - wmb(); /* clear done flag */ - - hinic_put_wqe(rq->wq, wqe_size); -} - -/** - * hinic_rq_get_sge - get sge from the wqe - * @rq: recv queue - * @rq_wqe: wqe to get the sge from its buf address - * @cons_idx: consumer index - * @sge: returned sge - **/ -void hinic_rq_get_sge(struct hinic_rq *rq, struct hinic_rq_wqe *rq_wqe, - u16 cons_idx, struct hinic_sge *sge) -{ - struct hinic_rq_cqe *cqe = rq->cqe[cons_idx]; - u32 len = be32_to_cpu(cqe->len); - - sge->hi_addr = be32_to_cpu(rq_wqe->buf_desc.hi_addr); - sge->lo_addr = be32_to_cpu(rq_wqe->buf_desc.lo_addr); - sge->len = HINIC_RQ_CQE_SGE_GET(len, LEN); -} - -/** - * hinic_rq_prepare_wqe - prepare wqe before insert to the queue - * @rq: recv queue - * @prod_idx: pi value - * @rq_wqe: the wqe - * @sge: sge for use by the wqe for recv buf address - **/ -void hinic_rq_prepare_wqe(struct hinic_rq *rq, u16 prod_idx, - struct hinic_rq_wqe *rq_wqe, struct hinic_sge *sge) -{ - struct hinic_rq_cqe_sect *cqe_sect = &rq_wqe->cqe_sect; - struct hinic_rq_bufdesc *buf_desc = &rq_wqe->buf_desc; - struct hinic_rq_cqe *cqe = rq->cqe[prod_idx]; - struct hinic_rq_ctrl *ctrl = &rq_wqe->ctrl; - dma_addr_t cqe_dma = rq->cqe_dma[prod_idx]; - - ctrl->ctrl_info = - HINIC_RQ_CTRL_SET(SIZE_8BYTES(sizeof(*ctrl)), LEN) | - HINIC_RQ_CTRL_SET(SIZE_8BYTES(sizeof(*cqe_sect)), - COMPLETE_LEN) | - HINIC_RQ_CTRL_SET(SIZE_8BYTES(sizeof(*buf_desc)), - BUFDESC_SECT_LEN) | - HINIC_RQ_CTRL_SET(RQ_COMPLETE_SGE, COMPLETE_FORMAT); - - hinic_set_sge(&cqe_sect->sge, cqe_dma, sizeof(*cqe)); - - buf_desc->hi_addr = sge->hi_addr; - buf_desc->lo_addr = sge->lo_addr; -} - -/** - * hinic_rq_update - update pi of the rq - * @rq: recv queue - * @prod_idx: pi value - **/ -void hinic_rq_update(struct hinic_rq *rq, u16 prod_idx) -{ - *rq->pi_virt_addr = cpu_to_be16(RQ_MASKED_IDX(rq, prod_idx + 1)); -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h deleted file mode 100644 index 6c84f83..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_QP_H -#define HINIC_HW_QP_H - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/sizes.h> -#include <linux/pci.h> -#include <linux/skbuff.h> - -#include "hinic_common.h" -#include "hinic_hw_if.h" -#include "hinic_hw_wqe.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_qp_ctxt.h" - -#define HINIC_SQ_DB_INFO_PI_HI_SHIFT 0 -#define HINIC_SQ_DB_INFO_QID_SHIFT 8 -#define HINIC_SQ_DB_INFO_PATH_SHIFT 23 -#define HINIC_SQ_DB_INFO_COS_SHIFT 24 -#define HINIC_SQ_DB_INFO_TYPE_SHIFT 27 - -#define HINIC_SQ_DB_INFO_PI_HI_MASK 0xFF -#define HINIC_SQ_DB_INFO_QID_MASK 0x3FF -#define HINIC_SQ_DB_INFO_PATH_MASK 0x1 -#define HINIC_SQ_DB_INFO_COS_MASK 0x7 -#define HINIC_SQ_DB_INFO_TYPE_MASK 0x1F - -#define HINIC_SQ_DB_INFO_SET(val, member) \ - (((u32)(val) & HINIC_SQ_DB_INFO_##member##_MASK) \ - << HINIC_SQ_DB_INFO_##member##_SHIFT) - -#define HINIC_SQ_WQEBB_SIZE 64 -#define HINIC_RQ_WQEBB_SIZE 32 - -#define HINIC_SQ_PAGE_SIZE SZ_4K -#define HINIC_RQ_PAGE_SIZE SZ_4K - -#define HINIC_SQ_DEPTH SZ_4K -#define HINIC_RQ_DEPTH SZ_4K - -/* In any change to HINIC_RX_BUF_SZ, HINIC_RX_BUF_SZ_IDX must be changed */ -#define HINIC_RX_BUF_SZ 2048 -#define HINIC_RX_BUF_SZ_IDX HINIC_RX_BUF_SZ_2048_IDX - -#define HINIC_MIN_TX_WQE_SIZE(wq) \ - ALIGN(HINIC_SQ_WQE_SIZE(1), (wq)->wqebb_size) - -#define HINIC_MIN_TX_NUM_WQEBBS(sq) \ - (HINIC_MIN_TX_WQE_SIZE((sq)->wq) / (sq)->wq->wqebb_size) - -enum hinic_rx_buf_sz_idx { - HINIC_RX_BUF_SZ_32_IDX, - HINIC_RX_BUF_SZ_64_IDX, - HINIC_RX_BUF_SZ_96_IDX, - HINIC_RX_BUF_SZ_128_IDX, - HINIC_RX_BUF_SZ_192_IDX, - HINIC_RX_BUF_SZ_256_IDX, - HINIC_RX_BUF_SZ_384_IDX, - HINIC_RX_BUF_SZ_512_IDX, - HINIC_RX_BUF_SZ_768_IDX, - HINIC_RX_BUF_SZ_1024_IDX, - HINIC_RX_BUF_SZ_1536_IDX, - HINIC_RX_BUF_SZ_2048_IDX, - HINIC_RX_BUF_SZ_3072_IDX, - HINIC_RX_BUF_SZ_4096_IDX, - HINIC_RX_BUF_SZ_8192_IDX, - HINIC_RX_BUF_SZ_16384_IDX, -}; - -struct hinic_sq { - struct hinic_hwif *hwif; - - struct hinic_wq *wq; - - u32 irq; - u16 msix_entry; - - void *hw_ci_addr; - dma_addr_t hw_ci_dma_addr; - - void __iomem *db_base; - - struct sk_buff **saved_skb; -}; - -struct hinic_rq { - struct hinic_hwif *hwif; - - struct hinic_wq *wq; - - u32 irq; - u16 msix_entry; - - size_t buf_sz; - - struct sk_buff **saved_skb; - - struct hinic_rq_cqe **cqe; - dma_addr_t *cqe_dma; - - u16 *pi_virt_addr; - dma_addr_t pi_dma_addr; -}; - -struct hinic_qp { - struct hinic_sq sq; - struct hinic_rq rq; - - u16 q_id; -}; - -void hinic_qp_prepare_header(struct hinic_qp_ctxt_header *qp_ctxt_hdr, - enum hinic_qp_ctxt_type ctxt_type, - u16 num_queues, u16 max_queues); - -void hinic_sq_prepare_ctxt(struct hinic_sq_ctxt *sq_ctxt, - struct hinic_sq *sq, u16 global_qid); - -void hinic_rq_prepare_ctxt(struct hinic_rq_ctxt *rq_ctxt, - struct hinic_rq *rq, u16 global_qid); - -int hinic_init_sq(struct hinic_sq *sq, struct hinic_hwif *hwif, - struct hinic_wq *wq, struct msix_entry *entry, void *ci_addr, - dma_addr_t ci_dma_addr, void __iomem *db_base); - -void hinic_clean_sq(struct hinic_sq *sq); - -int hinic_init_rq(struct hinic_rq *rq, struct hinic_hwif *hwif, - struct hinic_wq *wq, struct msix_entry *entry); - -void hinic_clean_rq(struct hinic_rq *rq); - -int hinic_get_sq_free_wqebbs(struct hinic_sq *sq); - -int hinic_get_rq_free_wqebbs(struct hinic_rq *rq); - -void hinic_sq_prepare_wqe(struct hinic_sq *sq, u16 prod_idx, - struct hinic_sq_wqe *wqe, struct hinic_sge *sges, - int nr_sges); - -void hinic_sq_write_db(struct hinic_sq *sq, u16 prod_idx, unsigned int wqe_size, - unsigned int cos); - -struct hinic_sq_wqe *hinic_sq_get_wqe(struct hinic_sq *sq, - unsigned int wqe_size, u16 *prod_idx); - -void hinic_sq_write_wqe(struct hinic_sq *sq, u16 prod_idx, - struct hinic_sq_wqe *wqe, struct sk_buff *skb, - unsigned int wqe_size); - -struct hinic_sq_wqe *hinic_sq_read_wqe(struct hinic_sq *sq, - struct sk_buff **skb, - unsigned int wqe_size, u16 *cons_idx); - -struct hinic_sq_wqe *hinic_sq_read_wqebb(struct hinic_sq *sq, - struct sk_buff **skb, - unsigned int *wqe_size, u16 *cons_idx); - -void hinic_sq_put_wqe(struct hinic_sq *sq, unsigned int wqe_size); - -void hinic_sq_get_sges(struct hinic_sq_wqe *wqe, struct hinic_sge *sges, - int nr_sges); - -struct hinic_rq_wqe *hinic_rq_get_wqe(struct hinic_rq *rq, - unsigned int wqe_size, u16 *prod_idx); - -void hinic_rq_write_wqe(struct hinic_rq *rq, u16 prod_idx, - struct hinic_rq_wqe *wqe, struct sk_buff *skb); - -struct hinic_rq_wqe *hinic_rq_read_wqe(struct hinic_rq *rq, - unsigned int wqe_size, - struct sk_buff **skb, u16 *cons_idx); - -struct hinic_rq_wqe *hinic_rq_read_next_wqe(struct hinic_rq *rq, - unsigned int wqe_size, - struct sk_buff **skb, - u16 *cons_idx); - -void hinic_rq_put_wqe(struct hinic_rq *rq, u16 cons_idx, - unsigned int wqe_size); - -void hinic_rq_get_sge(struct hinic_rq *rq, struct hinic_rq_wqe *wqe, - u16 cons_idx, struct hinic_sge *sge); - -void hinic_rq_prepare_wqe(struct hinic_rq *rq, u16 prod_idx, - struct hinic_rq_wqe *wqe, struct hinic_sge *sge); - -void hinic_rq_update(struct hinic_rq *rq, u16 prod_idx); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp_ctxt.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_qp_ctxt.h deleted file mode 100644 index 376abf0..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_qp_ctxt.h +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_QP_CTXT_H -#define HINIC_HW_QP_CTXT_H - -#include <linux/types.h> - -#include "hinic_hw_cmdq.h" - -#define HINIC_SQ_CTXT_CEQ_ATTR_GLOBAL_SQ_ID_SHIFT 13 -#define HINIC_SQ_CTXT_CEQ_ATTR_EN_SHIFT 23 - -#define HINIC_SQ_CTXT_CEQ_ATTR_GLOBAL_SQ_ID_MASK 0x3FF -#define HINIC_SQ_CTXT_CEQ_ATTR_EN_MASK 0x1 - -#define HINIC_SQ_CTXT_CEQ_ATTR_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTXT_CEQ_ATTR_##member##_MASK) \ - << HINIC_SQ_CTXT_CEQ_ATTR_##member##_SHIFT) - -#define HINIC_SQ_CTXT_CI_IDX_SHIFT 11 -#define HINIC_SQ_CTXT_CI_WRAPPED_SHIFT 23 - -#define HINIC_SQ_CTXT_CI_IDX_MASK 0xFFF -#define HINIC_SQ_CTXT_CI_WRAPPED_MASK 0x1 - -#define HINIC_SQ_CTXT_CI_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTXT_CI_##member##_MASK) \ - << HINIC_SQ_CTXT_CI_##member##_SHIFT) - -#define HINIC_SQ_CTXT_WQ_PAGE_HI_PFN_SHIFT 0 -#define HINIC_SQ_CTXT_WQ_PAGE_PI_SHIFT 20 - -#define HINIC_SQ_CTXT_WQ_PAGE_HI_PFN_MASK 0xFFFFF -#define HINIC_SQ_CTXT_WQ_PAGE_PI_MASK 0xFFF - -#define HINIC_SQ_CTXT_WQ_PAGE_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTXT_WQ_PAGE_##member##_MASK) \ - << HINIC_SQ_CTXT_WQ_PAGE_##member##_SHIFT) - -#define HINIC_SQ_CTXT_PREF_CACHE_THRESHOLD_SHIFT 0 -#define HINIC_SQ_CTXT_PREF_CACHE_MAX_SHIFT 14 -#define HINIC_SQ_CTXT_PREF_CACHE_MIN_SHIFT 25 - -#define HINIC_SQ_CTXT_PREF_CACHE_THRESHOLD_MASK 0x3FFF -#define HINIC_SQ_CTXT_PREF_CACHE_MAX_MASK 0x7FF -#define HINIC_SQ_CTXT_PREF_CACHE_MIN_MASK 0x7F - -#define HINIC_SQ_CTXT_PREF_WQ_HI_PFN_SHIFT 0 -#define HINIC_SQ_CTXT_PREF_CI_SHIFT 20 - -#define HINIC_SQ_CTXT_PREF_WQ_HI_PFN_MASK 0xFFFFF -#define HINIC_SQ_CTXT_PREF_CI_MASK 0xFFF - -#define HINIC_SQ_CTXT_PREF_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTXT_PREF_##member##_MASK) \ - << HINIC_SQ_CTXT_PREF_##member##_SHIFT) - -#define HINIC_SQ_CTXT_WQ_BLOCK_HI_PFN_SHIFT 0 - -#define HINIC_SQ_CTXT_WQ_BLOCK_HI_PFN_MASK 0x7FFFFF - -#define HINIC_SQ_CTXT_WQ_BLOCK_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTXT_WQ_BLOCK_##member##_MASK) \ - << HINIC_SQ_CTXT_WQ_BLOCK_##member##_SHIFT) - -#define HINIC_RQ_CTXT_CEQ_ATTR_EN_SHIFT 0 -#define HINIC_RQ_CTXT_CEQ_ATTR_WRAPPED_SHIFT 1 - -#define HINIC_RQ_CTXT_CEQ_ATTR_EN_MASK 0x1 -#define HINIC_RQ_CTXT_CEQ_ATTR_WRAPPED_MASK 0x1 - -#define HINIC_RQ_CTXT_CEQ_ATTR_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTXT_CEQ_ATTR_##member##_MASK) \ - << HINIC_RQ_CTXT_CEQ_ATTR_##member##_SHIFT) - -#define HINIC_RQ_CTXT_PI_IDX_SHIFT 0 -#define HINIC_RQ_CTXT_PI_INTR_SHIFT 22 - -#define HINIC_RQ_CTXT_PI_IDX_MASK 0xFFF -#define HINIC_RQ_CTXT_PI_INTR_MASK 0x3FF - -#define HINIC_RQ_CTXT_PI_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTXT_PI_##member##_MASK) << \ - HINIC_RQ_CTXT_PI_##member##_SHIFT) - -#define HINIC_RQ_CTXT_WQ_PAGE_HI_PFN_SHIFT 0 -#define HINIC_RQ_CTXT_WQ_PAGE_CI_SHIFT 20 - -#define HINIC_RQ_CTXT_WQ_PAGE_HI_PFN_MASK 0xFFFFF -#define HINIC_RQ_CTXT_WQ_PAGE_CI_MASK 0xFFF - -#define HINIC_RQ_CTXT_WQ_PAGE_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTXT_WQ_PAGE_##member##_MASK) << \ - HINIC_RQ_CTXT_WQ_PAGE_##member##_SHIFT) - -#define HINIC_RQ_CTXT_PREF_CACHE_THRESHOLD_SHIFT 0 -#define HINIC_RQ_CTXT_PREF_CACHE_MAX_SHIFT 14 -#define HINIC_RQ_CTXT_PREF_CACHE_MIN_SHIFT 25 - -#define HINIC_RQ_CTXT_PREF_CACHE_THRESHOLD_MASK 0x3FFF -#define HINIC_RQ_CTXT_PREF_CACHE_MAX_MASK 0x7FF -#define HINIC_RQ_CTXT_PREF_CACHE_MIN_MASK 0x7F - -#define HINIC_RQ_CTXT_PREF_WQ_HI_PFN_SHIFT 0 -#define HINIC_RQ_CTXT_PREF_CI_SHIFT 20 - -#define HINIC_RQ_CTXT_PREF_WQ_HI_PFN_MASK 0xFFFFF -#define HINIC_RQ_CTXT_PREF_CI_MASK 0xFFF - -#define HINIC_RQ_CTXT_PREF_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTXT_PREF_##member##_MASK) << \ - HINIC_RQ_CTXT_PREF_##member##_SHIFT) - -#define HINIC_RQ_CTXT_WQ_BLOCK_HI_PFN_SHIFT 0 - -#define HINIC_RQ_CTXT_WQ_BLOCK_HI_PFN_MASK 0x7FFFFF - -#define HINIC_RQ_CTXT_WQ_BLOCK_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTXT_WQ_BLOCK_##member##_MASK) << \ - HINIC_RQ_CTXT_WQ_BLOCK_##member##_SHIFT) - -#define HINIC_SQ_CTXT_SIZE(num_sqs) (sizeof(struct hinic_qp_ctxt_header) \ - + (num_sqs) * sizeof(struct hinic_sq_ctxt)) - -#define HINIC_RQ_CTXT_SIZE(num_rqs) (sizeof(struct hinic_qp_ctxt_header) \ - + (num_rqs) * sizeof(struct hinic_rq_ctxt)) - -#define HINIC_WQ_PAGE_PFN_SHIFT 12 -#define HINIC_WQ_BLOCK_PFN_SHIFT 9 - -#define HINIC_WQ_PAGE_PFN(page_addr) ((page_addr) >> HINIC_WQ_PAGE_PFN_SHIFT) -#define HINIC_WQ_BLOCK_PFN(page_addr) ((page_addr) >> \ - HINIC_WQ_BLOCK_PFN_SHIFT) - -#define HINIC_Q_CTXT_MAX \ - ((HINIC_CMDQ_BUF_SIZE - sizeof(struct hinic_qp_ctxt_header)) \ - / sizeof(struct hinic_sq_ctxt)) - -enum hinic_qp_ctxt_type { - HINIC_QP_CTXT_TYPE_SQ, - HINIC_QP_CTXT_TYPE_RQ -}; - -struct hinic_qp_ctxt_header { - u16 num_queues; - u16 queue_type; - u32 addr_offset; -}; - -struct hinic_sq_ctxt { - u32 ceq_attr; - - u32 ci_wrapped; - - u32 wq_hi_pfn_pi; - u32 wq_lo_pfn; - - u32 pref_cache; - u32 pref_wrapped; - u32 pref_wq_hi_pfn_ci; - u32 pref_wq_lo_pfn; - - u32 rsvd0; - u32 rsvd1; - - u32 wq_block_hi_pfn; - u32 wq_block_lo_pfn; -}; - -struct hinic_rq_ctxt { - u32 ceq_attr; - - u32 pi_intr_attr; - - u32 wq_hi_pfn_ci; - u32 wq_lo_pfn; - - u32 pref_cache; - u32 pref_wrapped; - - u32 pref_wq_hi_pfn_ci; - u32 pref_wq_lo_pfn; - - u32 pi_paddr_hi; - u32 pi_paddr_lo; - - u32 wq_block_hi_pfn; - u32 wq_block_lo_pfn; -}; - -struct hinic_sq_ctxt_block { - struct hinic_qp_ctxt_header hdr; - struct hinic_sq_ctxt sq_ctxt[HINIC_Q_CTXT_MAX]; -}; - -struct hinic_rq_ctxt_block { - struct hinic_qp_ctxt_header hdr; - struct hinic_rq_ctxt rq_ctxt[HINIC_Q_CTXT_MAX]; -}; - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c deleted file mode 100644 index 3e3181c08..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.c +++ /dev/null @@ -1,878 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/slab.h> -#include <linux/atomic.h> -#include <linux/semaphore.h> -#include <linux/errno.h> -#include <linux/vmalloc.h> -#include <linux/err.h> -#include <asm/byteorder.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_wqe.h" -#include "hinic_hw_wq.h" -#include "hinic_hw_cmdq.h" - -#define WQS_BLOCKS_PER_PAGE 4 - -#define WQ_BLOCK_SIZE 4096 -#define WQS_PAGE_SIZE (WQS_BLOCKS_PER_PAGE * WQ_BLOCK_SIZE) - -#define WQS_MAX_NUM_BLOCKS 128 -#define WQS_FREE_BLOCKS_SIZE(wqs) (WQS_MAX_NUM_BLOCKS * \ - sizeof((wqs)->free_blocks[0])) - -#define WQ_SIZE(wq) ((wq)->q_depth * (wq)->wqebb_size) - -#define WQ_PAGE_ADDR_SIZE sizeof(u64) -#define WQ_MAX_PAGES (WQ_BLOCK_SIZE / WQ_PAGE_ADDR_SIZE) - -#define CMDQ_BLOCK_SIZE 512 -#define CMDQ_PAGE_SIZE 4096 - -#define CMDQ_WQ_MAX_PAGES (CMDQ_BLOCK_SIZE / WQ_PAGE_ADDR_SIZE) - -#define WQ_BASE_VADDR(wqs, wq) \ - ((void *)((wqs)->page_vaddr[(wq)->page_idx]) \ - + (wq)->block_idx * WQ_BLOCK_SIZE) - -#define WQ_BASE_PADDR(wqs, wq) \ - ((wqs)->page_paddr[(wq)->page_idx] \ - + (wq)->block_idx * WQ_BLOCK_SIZE) - -#define WQ_BASE_ADDR(wqs, wq) \ - ((void *)((wqs)->shadow_page_vaddr[(wq)->page_idx]) \ - + (wq)->block_idx * WQ_BLOCK_SIZE) - -#define CMDQ_BASE_VADDR(cmdq_pages, wq) \ - ((void *)((cmdq_pages)->page_vaddr) \ - + (wq)->block_idx * CMDQ_BLOCK_SIZE) - -#define CMDQ_BASE_PADDR(cmdq_pages, wq) \ - ((cmdq_pages)->page_paddr \ - + (wq)->block_idx * CMDQ_BLOCK_SIZE) - -#define CMDQ_BASE_ADDR(cmdq_pages, wq) \ - ((void *)((cmdq_pages)->shadow_page_vaddr) \ - + (wq)->block_idx * CMDQ_BLOCK_SIZE) - -#define WQE_PAGE_OFF(wq, idx) (((idx) & ((wq)->num_wqebbs_per_page - 1)) * \ - (wq)->wqebb_size) - -#define WQE_PAGE_NUM(wq, idx) (((idx) / ((wq)->num_wqebbs_per_page)) \ - & ((wq)->num_q_pages - 1)) - -#define WQ_PAGE_ADDR(wq, idx) \ - ((wq)->shadow_block_vaddr[WQE_PAGE_NUM(wq, idx)]) - -#define MASKED_WQE_IDX(wq, idx) ((idx) & (wq)->mask) - -#define WQE_IN_RANGE(wqe, start, end) \ - (((unsigned long)(wqe) >= (unsigned long)(start)) && \ - ((unsigned long)(wqe) < (unsigned long)(end))) - -#define WQE_SHADOW_PAGE(wq, wqe) \ - (((unsigned long)(wqe) - (unsigned long)(wq)->shadow_wqe) \ - / (wq)->max_wqe_size) - -/** - * queue_alloc_page - allocate page for Queue - * @hwif: HW interface for allocating DMA - * @vaddr: virtual address will be returned in this address - * @paddr: physical address will be returned in this address - * @shadow_vaddr: VM area will be return here for holding WQ page addresses - * @page_sz: page size of each WQ page - * - * Return 0 - Success, negative - Failure - **/ -static int queue_alloc_page(struct hinic_hwif *hwif, u64 **vaddr, u64 *paddr, - void ***shadow_vaddr, size_t page_sz) -{ - struct pci_dev *pdev = hwif->pdev; - dma_addr_t dma_addr; - - *vaddr = dma_zalloc_coherent(&pdev->dev, page_sz, &dma_addr, - GFP_KERNEL); - if (!*vaddr) { - dev_err(&pdev->dev, "Failed to allocate dma for wqs page\n"); - return -ENOMEM; - } - - *paddr = (u64)dma_addr; - - /* use vzalloc for big mem */ - *shadow_vaddr = vzalloc(page_sz); - if (!*shadow_vaddr) - goto err_shadow_vaddr; - - return 0; - -err_shadow_vaddr: - dma_free_coherent(&pdev->dev, page_sz, *vaddr, dma_addr); - return -ENOMEM; -} - -/** - * wqs_allocate_page - allocate page for WQ set - * @wqs: Work Queue Set - * @page_idx: the page index of the page will be allocated - * - * Return 0 - Success, negative - Failure - **/ -static int wqs_allocate_page(struct hinic_wqs *wqs, int page_idx) -{ - return queue_alloc_page(wqs->hwif, &wqs->page_vaddr[page_idx], - &wqs->page_paddr[page_idx], - &wqs->shadow_page_vaddr[page_idx], - WQS_PAGE_SIZE); -} - -/** - * wqs_free_page - free page of WQ set - * @wqs: Work Queue Set - * @page_idx: the page index of the page will be freed - **/ -static void wqs_free_page(struct hinic_wqs *wqs, int page_idx) -{ - struct hinic_hwif *hwif = wqs->hwif; - struct pci_dev *pdev = hwif->pdev; - - dma_free_coherent(&pdev->dev, WQS_PAGE_SIZE, - wqs->page_vaddr[page_idx], - (dma_addr_t)wqs->page_paddr[page_idx]); - vfree(wqs->shadow_page_vaddr[page_idx]); -} - -/** - * cmdq_allocate_page - allocate page for cmdq - * @cmdq_pages: the pages of the cmdq queue struct to hold the page - * - * Return 0 - Success, negative - Failure - **/ -static int cmdq_allocate_page(struct hinic_cmdq_pages *cmdq_pages) -{ - return queue_alloc_page(cmdq_pages->hwif, &cmdq_pages->page_vaddr, - &cmdq_pages->page_paddr, - &cmdq_pages->shadow_page_vaddr, - CMDQ_PAGE_SIZE); -} - -/** - * cmdq_free_page - free page from cmdq - * @cmdq_pages: the pages of the cmdq queue struct that hold the page - * - * Return 0 - Success, negative - Failure - **/ -static void cmdq_free_page(struct hinic_cmdq_pages *cmdq_pages) -{ - struct hinic_hwif *hwif = cmdq_pages->hwif; - struct pci_dev *pdev = hwif->pdev; - - dma_free_coherent(&pdev->dev, CMDQ_PAGE_SIZE, - cmdq_pages->page_vaddr, - (dma_addr_t)cmdq_pages->page_paddr); - vfree(cmdq_pages->shadow_page_vaddr); -} - -static int alloc_page_arrays(struct hinic_wqs *wqs) -{ - struct hinic_hwif *hwif = wqs->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t size; - - size = wqs->num_pages * sizeof(*wqs->page_paddr); - wqs->page_paddr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!wqs->page_paddr) - return -ENOMEM; - - size = wqs->num_pages * sizeof(*wqs->page_vaddr); - wqs->page_vaddr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!wqs->page_vaddr) - goto err_page_vaddr; - - size = wqs->num_pages * sizeof(*wqs->shadow_page_vaddr); - wqs->shadow_page_vaddr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!wqs->shadow_page_vaddr) - goto err_page_shadow_vaddr; - - return 0; - -err_page_shadow_vaddr: - devm_kfree(&pdev->dev, wqs->page_vaddr); - -err_page_vaddr: - devm_kfree(&pdev->dev, wqs->page_paddr); - return -ENOMEM; -} - -static void free_page_arrays(struct hinic_wqs *wqs) -{ - struct hinic_hwif *hwif = wqs->hwif; - struct pci_dev *pdev = hwif->pdev; - - devm_kfree(&pdev->dev, wqs->shadow_page_vaddr); - devm_kfree(&pdev->dev, wqs->page_vaddr); - devm_kfree(&pdev->dev, wqs->page_paddr); -} - -static int wqs_next_block(struct hinic_wqs *wqs, int *page_idx, - int *block_idx) -{ - int pos; - - down(&wqs->alloc_blocks_lock); - - wqs->num_free_blks--; - - if (wqs->num_free_blks < 0) { - wqs->num_free_blks++; - up(&wqs->alloc_blocks_lock); - return -ENOMEM; - } - - pos = wqs->alloc_blk_pos++; - pos &= WQS_MAX_NUM_BLOCKS - 1; - - *page_idx = wqs->free_blocks[pos].page_idx; - *block_idx = wqs->free_blocks[pos].block_idx; - - wqs->free_blocks[pos].page_idx = -1; - wqs->free_blocks[pos].block_idx = -1; - - up(&wqs->alloc_blocks_lock); - return 0; -} - -static void wqs_return_block(struct hinic_wqs *wqs, int page_idx, - int block_idx) -{ - int pos; - - down(&wqs->alloc_blocks_lock); - - pos = wqs->return_blk_pos++; - pos &= WQS_MAX_NUM_BLOCKS - 1; - - wqs->free_blocks[pos].page_idx = page_idx; - wqs->free_blocks[pos].block_idx = block_idx; - - wqs->num_free_blks++; - - up(&wqs->alloc_blocks_lock); -} - -static void init_wqs_blocks_arr(struct hinic_wqs *wqs) -{ - int page_idx, blk_idx, pos = 0; - - for (page_idx = 0; page_idx < wqs->num_pages; page_idx++) { - for (blk_idx = 0; blk_idx < WQS_BLOCKS_PER_PAGE; blk_idx++) { - wqs->free_blocks[pos].page_idx = page_idx; - wqs->free_blocks[pos].block_idx = blk_idx; - pos++; - } - } - - wqs->alloc_blk_pos = 0; - wqs->return_blk_pos = pos; - wqs->num_free_blks = pos; - - sema_init(&wqs->alloc_blocks_lock, 1); -} - -/** - * hinic_wqs_alloc - allocate Work Queues set - * @wqs: Work Queue Set - * @max_wqs: maximum wqs to allocate - * @hwif: HW interface for use for the allocation - * - * Return 0 - Success, negative - Failure - **/ -int hinic_wqs_alloc(struct hinic_wqs *wqs, int max_wqs, - struct hinic_hwif *hwif) -{ - struct pci_dev *pdev = hwif->pdev; - int err, i, page_idx; - - max_wqs = ALIGN(max_wqs, WQS_BLOCKS_PER_PAGE); - if (max_wqs > WQS_MAX_NUM_BLOCKS) { - dev_err(&pdev->dev, "Invalid max_wqs = %d\n", max_wqs); - return -EINVAL; - } - - wqs->hwif = hwif; - wqs->num_pages = max_wqs / WQS_BLOCKS_PER_PAGE; - - if (alloc_page_arrays(wqs)) { - dev_err(&pdev->dev, - "Failed to allocate mem for page addresses\n"); - return -ENOMEM; - } - - for (page_idx = 0; page_idx < wqs->num_pages; page_idx++) { - err = wqs_allocate_page(wqs, page_idx); - if (err) { - dev_err(&pdev->dev, "Failed wq page allocation\n"); - goto err_wq_allocate_page; - } - } - - wqs->free_blocks = devm_kzalloc(&pdev->dev, WQS_FREE_BLOCKS_SIZE(wqs), - GFP_KERNEL); - if (!wqs->free_blocks) { - err = -ENOMEM; - goto err_alloc_blocks; - } - - init_wqs_blocks_arr(wqs); - return 0; - -err_alloc_blocks: -err_wq_allocate_page: - for (i = 0; i < page_idx; i++) - wqs_free_page(wqs, i); - - free_page_arrays(wqs); - return err; -} - -/** - * hinic_wqs_free - free Work Queues set - * @wqs: Work Queue Set - **/ -void hinic_wqs_free(struct hinic_wqs *wqs) -{ - struct hinic_hwif *hwif = wqs->hwif; - struct pci_dev *pdev = hwif->pdev; - int page_idx; - - devm_kfree(&pdev->dev, wqs->free_blocks); - - for (page_idx = 0; page_idx < wqs->num_pages; page_idx++) - wqs_free_page(wqs, page_idx); - - free_page_arrays(wqs); -} - -/** - * alloc_wqes_shadow - allocate WQE shadows for WQ - * @wq: WQ to allocate shadows for - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_wqes_shadow(struct hinic_wq *wq) -{ - struct hinic_hwif *hwif = wq->hwif; - struct pci_dev *pdev = hwif->pdev; - size_t size; - - size = wq->num_q_pages * wq->max_wqe_size; - wq->shadow_wqe = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!wq->shadow_wqe) - return -ENOMEM; - - size = wq->num_q_pages * sizeof(wq->prod_idx); - wq->shadow_idx = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!wq->shadow_idx) - goto err_shadow_idx; - - return 0; - -err_shadow_idx: - devm_kfree(&pdev->dev, wq->shadow_wqe); - return -ENOMEM; -} - -/** - * free_wqes_shadow - free WQE shadows of WQ - * @wq: WQ to free shadows from - **/ -static void free_wqes_shadow(struct hinic_wq *wq) -{ - struct hinic_hwif *hwif = wq->hwif; - struct pci_dev *pdev = hwif->pdev; - - devm_kfree(&pdev->dev, wq->shadow_idx); - devm_kfree(&pdev->dev, wq->shadow_wqe); -} - -/** - * free_wq_pages - free pages of WQ - * @hwif: HW interface for releasing dma addresses - * @wq: WQ to free pages from - * @num_q_pages: number pages to free - **/ -static void free_wq_pages(struct hinic_wq *wq, struct hinic_hwif *hwif, - int num_q_pages) -{ - struct pci_dev *pdev = hwif->pdev; - int i; - - for (i = 0; i < num_q_pages; i++) { - void **vaddr = &wq->shadow_block_vaddr[i]; - u64 *paddr = &wq->block_vaddr[i]; - dma_addr_t dma_addr; - - dma_addr = (dma_addr_t)be64_to_cpu(*paddr); - dma_free_coherent(&pdev->dev, wq->wq_page_size, *vaddr, - dma_addr); - } - - free_wqes_shadow(wq); -} - -/** - * alloc_wq_pages - alloc pages for WQ - * @hwif: HW interface for allocating dma addresses - * @wq: WQ to allocate pages for - * @max_pages: maximum pages allowed - * - * Return 0 - Success, negative - Failure - **/ -static int alloc_wq_pages(struct hinic_wq *wq, struct hinic_hwif *hwif, - int max_pages) -{ - struct pci_dev *pdev = hwif->pdev; - int i, err, num_q_pages; - - num_q_pages = ALIGN(WQ_SIZE(wq), wq->wq_page_size) / wq->wq_page_size; - if (num_q_pages > max_pages) { - dev_err(&pdev->dev, "Number wq pages exceeds the limit\n"); - return -EINVAL; - } - - if (num_q_pages & (num_q_pages - 1)) { - dev_err(&pdev->dev, "Number wq pages must be power of 2\n"); - return -EINVAL; - } - - wq->num_q_pages = num_q_pages; - - err = alloc_wqes_shadow(wq); - if (err) { - dev_err(&pdev->dev, "Failed to allocate wqe shadow\n"); - return err; - } - - for (i = 0; i < num_q_pages; i++) { - void **vaddr = &wq->shadow_block_vaddr[i]; - u64 *paddr = &wq->block_vaddr[i]; - dma_addr_t dma_addr; - - *vaddr = dma_zalloc_coherent(&pdev->dev, wq->wq_page_size, - &dma_addr, GFP_KERNEL); - if (!*vaddr) { - dev_err(&pdev->dev, "Failed to allocate wq page\n"); - goto err_alloc_wq_pages; - } - - /* HW uses Big Endian Format */ - *paddr = cpu_to_be64(dma_addr); - } - - return 0; - -err_alloc_wq_pages: - free_wq_pages(wq, hwif, i); - return -ENOMEM; -} - -/** - * hinic_wq_allocate - Allocate the WQ resources from the WQS - * @wqs: WQ set from which to allocate the WQ resources - * @wq: WQ to allocate resources for it from the WQ set - * @wqebb_size: Work Queue Block Byte Size - * @wq_page_size: the page size in the Work Queue - * @q_depth: number of wqebbs in WQ - * @max_wqe_size: maximum WQE size that will be used in the WQ - * - * Return 0 - Success, negative - Failure - **/ -int hinic_wq_allocate(struct hinic_wqs *wqs, struct hinic_wq *wq, - u16 wqebb_size, u16 wq_page_size, u16 q_depth, - u16 max_wqe_size) -{ - struct hinic_hwif *hwif = wqs->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 num_wqebbs_per_page; - int err; - - if (wqebb_size == 0) { - dev_err(&pdev->dev, "wqebb_size must be > 0\n"); - return -EINVAL; - } - - if (wq_page_size == 0) { - dev_err(&pdev->dev, "wq_page_size must be > 0\n"); - return -EINVAL; - } - - if (q_depth & (q_depth - 1)) { - dev_err(&pdev->dev, "WQ q_depth must be power of 2\n"); - return -EINVAL; - } - - num_wqebbs_per_page = ALIGN(wq_page_size, wqebb_size) / wqebb_size; - - if (num_wqebbs_per_page & (num_wqebbs_per_page - 1)) { - dev_err(&pdev->dev, "num wqebbs per page must be power of 2\n"); - return -EINVAL; - } - - wq->hwif = hwif; - - err = wqs_next_block(wqs, &wq->page_idx, &wq->block_idx); - if (err) { - dev_err(&pdev->dev, "Failed to get free wqs next block\n"); - return err; - } - - wq->wqebb_size = wqebb_size; - wq->wq_page_size = wq_page_size; - wq->q_depth = q_depth; - wq->max_wqe_size = max_wqe_size; - wq->num_wqebbs_per_page = num_wqebbs_per_page; - - wq->block_vaddr = WQ_BASE_VADDR(wqs, wq); - wq->shadow_block_vaddr = WQ_BASE_ADDR(wqs, wq); - wq->block_paddr = WQ_BASE_PADDR(wqs, wq); - - err = alloc_wq_pages(wq, wqs->hwif, WQ_MAX_PAGES); - if (err) { - dev_err(&pdev->dev, "Failed to allocate wq pages\n"); - goto err_alloc_wq_pages; - } - - atomic_set(&wq->cons_idx, 0); - atomic_set(&wq->prod_idx, 0); - atomic_set(&wq->delta, q_depth); - wq->mask = q_depth - 1; - - return 0; - -err_alloc_wq_pages: - wqs_return_block(wqs, wq->page_idx, wq->block_idx); - return err; -} - -/** - * hinic_wq_free - Free the WQ resources to the WQS - * @wqs: WQ set to free the WQ resources to it - * @wq: WQ to free its resources to the WQ set resources - **/ -void hinic_wq_free(struct hinic_wqs *wqs, struct hinic_wq *wq) -{ - free_wq_pages(wq, wqs->hwif, wq->num_q_pages); - - wqs_return_block(wqs, wq->page_idx, wq->block_idx); -} - -/** - * hinic_wqs_cmdq_alloc - Allocate wqs for cmdqs - * @cmdq_pages: will hold the pages of the cmdq - * @wq: returned wqs - * @hwif: HW interface - * @cmdq_blocks: number of cmdq blocks/wq to allocate - * @wqebb_size: Work Queue Block Byte Size - * @wq_page_size: the page size in the Work Queue - * @q_depth: number of wqebbs in WQ - * @max_wqe_size: maximum WQE size that will be used in the WQ - * - * Return 0 - Success, negative - Failure - **/ -int hinic_wqs_cmdq_alloc(struct hinic_cmdq_pages *cmdq_pages, - struct hinic_wq *wq, struct hinic_hwif *hwif, - int cmdq_blocks, u16 wqebb_size, u16 wq_page_size, - u16 q_depth, u16 max_wqe_size) -{ - struct pci_dev *pdev = hwif->pdev; - u16 num_wqebbs_per_page; - int i, j, err = -ENOMEM; - - if (wqebb_size == 0) { - dev_err(&pdev->dev, "wqebb_size must be > 0\n"); - return -EINVAL; - } - - if (wq_page_size == 0) { - dev_err(&pdev->dev, "wq_page_size must be > 0\n"); - return -EINVAL; - } - - if (q_depth & (q_depth - 1)) { - dev_err(&pdev->dev, "WQ q_depth must be power of 2\n"); - return -EINVAL; - } - - num_wqebbs_per_page = ALIGN(wq_page_size, wqebb_size) / wqebb_size; - - if (num_wqebbs_per_page & (num_wqebbs_per_page - 1)) { - dev_err(&pdev->dev, "num wqebbs per page must be power of 2\n"); - return -EINVAL; - } - - cmdq_pages->hwif = hwif; - - err = cmdq_allocate_page(cmdq_pages); - if (err) { - dev_err(&pdev->dev, "Failed to allocate CMDQ page\n"); - return err; - } - - for (i = 0; i < cmdq_blocks; i++) { - wq[i].hwif = hwif; - wq[i].page_idx = 0; - wq[i].block_idx = i; - - wq[i].wqebb_size = wqebb_size; - wq[i].wq_page_size = wq_page_size; - wq[i].q_depth = q_depth; - wq[i].max_wqe_size = max_wqe_size; - wq[i].num_wqebbs_per_page = num_wqebbs_per_page; - - wq[i].block_vaddr = CMDQ_BASE_VADDR(cmdq_pages, &wq[i]); - wq[i].shadow_block_vaddr = CMDQ_BASE_ADDR(cmdq_pages, &wq[i]); - wq[i].block_paddr = CMDQ_BASE_PADDR(cmdq_pages, &wq[i]); - - err = alloc_wq_pages(&wq[i], cmdq_pages->hwif, - CMDQ_WQ_MAX_PAGES); - if (err) { - dev_err(&pdev->dev, "Failed to alloc CMDQ blocks\n"); - goto err_cmdq_block; - } - - atomic_set(&wq[i].cons_idx, 0); - atomic_set(&wq[i].prod_idx, 0); - atomic_set(&wq[i].delta, q_depth); - wq[i].mask = q_depth - 1; - } - - return 0; - -err_cmdq_block: - for (j = 0; j < i; j++) - free_wq_pages(&wq[j], cmdq_pages->hwif, wq[j].num_q_pages); - - cmdq_free_page(cmdq_pages); - return err; -} - -/** - * hinic_wqs_cmdq_free - Free wqs from cmdqs - * @cmdq_pages: hold the pages of the cmdq - * @wq: wqs to free - * @cmdq_blocks: number of wqs to free - **/ -void hinic_wqs_cmdq_free(struct hinic_cmdq_pages *cmdq_pages, - struct hinic_wq *wq, int cmdq_blocks) -{ - int i; - - for (i = 0; i < cmdq_blocks; i++) - free_wq_pages(&wq[i], cmdq_pages->hwif, wq[i].num_q_pages); - - cmdq_free_page(cmdq_pages); -} - -static void copy_wqe_to_shadow(struct hinic_wq *wq, void *shadow_addr, - int num_wqebbs, u16 idx) -{ - void *wqebb_addr; - int i; - - for (i = 0; i < num_wqebbs; i++, idx++) { - idx = MASKED_WQE_IDX(wq, idx); - wqebb_addr = WQ_PAGE_ADDR(wq, idx) + - WQE_PAGE_OFF(wq, idx); - - memcpy(shadow_addr, wqebb_addr, wq->wqebb_size); - - shadow_addr += wq->wqebb_size; - } -} - -static void copy_wqe_from_shadow(struct hinic_wq *wq, void *shadow_addr, - int num_wqebbs, u16 idx) -{ - void *wqebb_addr; - int i; - - for (i = 0; i < num_wqebbs; i++, idx++) { - idx = MASKED_WQE_IDX(wq, idx); - wqebb_addr = WQ_PAGE_ADDR(wq, idx) + - WQE_PAGE_OFF(wq, idx); - - memcpy(wqebb_addr, shadow_addr, wq->wqebb_size); - shadow_addr += wq->wqebb_size; - } -} - -/** - * hinic_get_wqe - get wqe ptr in the current pi and update the pi - * @wq: wq to get wqe from - * @wqe_size: wqe size - * @prod_idx: returned pi - * - * Return wqe pointer - **/ -struct hinic_hw_wqe *hinic_get_wqe(struct hinic_wq *wq, unsigned int wqe_size, - u16 *prod_idx) -{ - int curr_pg, end_pg, num_wqebbs; - u16 curr_prod_idx, end_prod_idx; - - *prod_idx = MASKED_WQE_IDX(wq, atomic_read(&wq->prod_idx)); - - num_wqebbs = ALIGN(wqe_size, wq->wqebb_size) / wq->wqebb_size; - - if (atomic_sub_return(num_wqebbs, &wq->delta) <= 0) { - atomic_add(num_wqebbs, &wq->delta); - return ERR_PTR(-EBUSY); - } - - end_prod_idx = atomic_add_return(num_wqebbs, &wq->prod_idx); - - end_prod_idx = MASKED_WQE_IDX(wq, end_prod_idx); - curr_prod_idx = end_prod_idx - num_wqebbs; - curr_prod_idx = MASKED_WQE_IDX(wq, curr_prod_idx); - - /* end prod index points to the next wqebb, therefore minus 1 */ - end_prod_idx = MASKED_WQE_IDX(wq, end_prod_idx - 1); - - curr_pg = WQE_PAGE_NUM(wq, curr_prod_idx); - end_pg = WQE_PAGE_NUM(wq, end_prod_idx); - - *prod_idx = curr_prod_idx; - - if (curr_pg != end_pg) { - void *shadow_addr = &wq->shadow_wqe[curr_pg * wq->max_wqe_size]; - - copy_wqe_to_shadow(wq, shadow_addr, num_wqebbs, *prod_idx); - - wq->shadow_idx[curr_pg] = *prod_idx; - return shadow_addr; - } - - return WQ_PAGE_ADDR(wq, *prod_idx) + WQE_PAGE_OFF(wq, *prod_idx); -} - -/** - * hinic_put_wqe - return the wqe place to use for a new wqe - * @wq: wq to return wqe - * @wqe_size: wqe size - **/ -void hinic_put_wqe(struct hinic_wq *wq, unsigned int wqe_size) -{ - int num_wqebbs = ALIGN(wqe_size, wq->wqebb_size) / wq->wqebb_size; - - atomic_add(num_wqebbs, &wq->cons_idx); - - atomic_add(num_wqebbs, &wq->delta); -} - -/** - * hinic_read_wqe - read wqe ptr in the current ci - * @wq: wq to get read from - * @wqe_size: wqe size - * @cons_idx: returned ci - * - * Return wqe pointer - **/ -struct hinic_hw_wqe *hinic_read_wqe(struct hinic_wq *wq, unsigned int wqe_size, - u16 *cons_idx) -{ - int num_wqebbs = ALIGN(wqe_size, wq->wqebb_size) / wq->wqebb_size; - u16 curr_cons_idx, end_cons_idx; - int curr_pg, end_pg; - - if ((atomic_read(&wq->delta) + num_wqebbs) > wq->q_depth) - return ERR_PTR(-EBUSY); - - curr_cons_idx = atomic_read(&wq->cons_idx); - - curr_cons_idx = MASKED_WQE_IDX(wq, curr_cons_idx); - end_cons_idx = MASKED_WQE_IDX(wq, curr_cons_idx + num_wqebbs - 1); - - curr_pg = WQE_PAGE_NUM(wq, curr_cons_idx); - end_pg = WQE_PAGE_NUM(wq, end_cons_idx); - - *cons_idx = curr_cons_idx; - - if (curr_pg != end_pg) { - void *shadow_addr = &wq->shadow_wqe[curr_pg * wq->max_wqe_size]; - - copy_wqe_to_shadow(wq, shadow_addr, num_wqebbs, *cons_idx); - return shadow_addr; - } - - return WQ_PAGE_ADDR(wq, *cons_idx) + WQE_PAGE_OFF(wq, *cons_idx); -} - -/** - * hinic_read_wqe_direct - read wqe directly from ci position - * @wq: wq - * @cons_idx: ci position - * - * Return wqe - **/ -struct hinic_hw_wqe *hinic_read_wqe_direct(struct hinic_wq *wq, u16 cons_idx) -{ - return WQ_PAGE_ADDR(wq, cons_idx) + WQE_PAGE_OFF(wq, cons_idx); -} - -/** - * wqe_shadow - check if a wqe is shadow - * @wq: wq of the wqe - * @wqe: the wqe for shadow checking - * - * Return true - shadow, false - Not shadow - **/ -static inline bool wqe_shadow(struct hinic_wq *wq, struct hinic_hw_wqe *wqe) -{ - size_t wqe_shadow_size = wq->num_q_pages * wq->max_wqe_size; - - return WQE_IN_RANGE(wqe, wq->shadow_wqe, - &wq->shadow_wqe[wqe_shadow_size]); -} - -/** - * hinic_write_wqe - write the wqe to the wq - * @wq: wq to write wqe to - * @wqe: wqe to write - * @wqe_size: wqe size - **/ -void hinic_write_wqe(struct hinic_wq *wq, struct hinic_hw_wqe *wqe, - unsigned int wqe_size) -{ - int curr_pg, num_wqebbs; - void *shadow_addr; - u16 prod_idx; - - if (wqe_shadow(wq, wqe)) { - curr_pg = WQE_SHADOW_PAGE(wq, wqe); - - prod_idx = wq->shadow_idx[curr_pg]; - num_wqebbs = ALIGN(wqe_size, wq->wqebb_size) / wq->wqebb_size; - shadow_addr = &wq->shadow_wqe[curr_pg * wq->max_wqe_size]; - - copy_wqe_from_shadow(wq, shadow_addr, num_wqebbs, prod_idx); - } -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h deleted file mode 100644 index 9c030a0..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wq.h +++ /dev/null @@ -1,117 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_WQ_H -#define HINIC_HW_WQ_H - -#include <linux/types.h> -#include <linux/semaphore.h> -#include <linux/atomic.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_wqe.h" - -struct hinic_free_block { - int page_idx; - int block_idx; -}; - -struct hinic_wq { - struct hinic_hwif *hwif; - - int page_idx; - int block_idx; - - u16 wqebb_size; - u16 wq_page_size; - u16 q_depth; - u16 max_wqe_size; - u16 num_wqebbs_per_page; - - /* The addresses are 64 bit in the HW */ - u64 block_paddr; - void **shadow_block_vaddr; - u64 *block_vaddr; - - int num_q_pages; - u8 *shadow_wqe; - u16 *shadow_idx; - - atomic_t cons_idx; - atomic_t prod_idx; - atomic_t delta; - u16 mask; -}; - -struct hinic_wqs { - struct hinic_hwif *hwif; - int num_pages; - - /* The addresses are 64 bit in the HW */ - u64 *page_paddr; - u64 **page_vaddr; - void ***shadow_page_vaddr; - - struct hinic_free_block *free_blocks; - int alloc_blk_pos; - int return_blk_pos; - int num_free_blks; - - /* Lock for getting a free block from the WQ set */ - struct semaphore alloc_blocks_lock; -}; - -struct hinic_cmdq_pages { - /* The addresses are 64 bit in the HW */ - u64 page_paddr; - u64 *page_vaddr; - void **shadow_page_vaddr; - - struct hinic_hwif *hwif; -}; - -int hinic_wqs_cmdq_alloc(struct hinic_cmdq_pages *cmdq_pages, - struct hinic_wq *wq, struct hinic_hwif *hwif, - int cmdq_blocks, u16 wqebb_size, u16 wq_page_size, - u16 q_depth, u16 max_wqe_size); - -void hinic_wqs_cmdq_free(struct hinic_cmdq_pages *cmdq_pages, - struct hinic_wq *wq, int cmdq_blocks); - -int hinic_wqs_alloc(struct hinic_wqs *wqs, int num_wqs, - struct hinic_hwif *hwif); - -void hinic_wqs_free(struct hinic_wqs *wqs); - -int hinic_wq_allocate(struct hinic_wqs *wqs, struct hinic_wq *wq, - u16 wqebb_size, u16 wq_page_size, u16 q_depth, - u16 max_wqe_size); - -void hinic_wq_free(struct hinic_wqs *wqs, struct hinic_wq *wq); - -struct hinic_hw_wqe *hinic_get_wqe(struct hinic_wq *wq, unsigned int wqe_size, - u16 *prod_idx); - -void hinic_put_wqe(struct hinic_wq *wq, unsigned int wqe_size); - -struct hinic_hw_wqe *hinic_read_wqe(struct hinic_wq *wq, unsigned int wqe_size, - u16 *cons_idx); - -struct hinic_hw_wqe *hinic_read_wqe_direct(struct hinic_wq *wq, u16 cons_idx); - -void hinic_write_wqe(struct hinic_wq *wq, struct hinic_hw_wqe *wqe, - unsigned int wqe_size); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_wqe.h b/drivers/net/ethernet/huawei/hinic/hinic_hw_wqe.h deleted file mode 100644 index bc73485..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_wqe.h +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_HW_WQE_H -#define HINIC_HW_WQE_H - -#include "hinic_common.h" - -#define HINIC_CMDQ_CTRL_PI_SHIFT 0 -#define HINIC_CMDQ_CTRL_CMD_SHIFT 16 -#define HINIC_CMDQ_CTRL_MOD_SHIFT 24 -#define HINIC_CMDQ_CTRL_ACK_TYPE_SHIFT 29 -#define HINIC_CMDQ_CTRL_HW_BUSY_BIT_SHIFT 31 - -#define HINIC_CMDQ_CTRL_PI_MASK 0xFFFF -#define HINIC_CMDQ_CTRL_CMD_MASK 0xFF -#define HINIC_CMDQ_CTRL_MOD_MASK 0x1F -#define HINIC_CMDQ_CTRL_ACK_TYPE_MASK 0x3 -#define HINIC_CMDQ_CTRL_HW_BUSY_BIT_MASK 0x1 - -#define HINIC_CMDQ_CTRL_SET(val, member) \ - (((u32)(val) & HINIC_CMDQ_CTRL_##member##_MASK) \ - << HINIC_CMDQ_CTRL_##member##_SHIFT) - -#define HINIC_CMDQ_CTRL_GET(val, member) \ - (((val) >> HINIC_CMDQ_CTRL_##member##_SHIFT) \ - & HINIC_CMDQ_CTRL_##member##_MASK) - -#define HINIC_CMDQ_WQE_HEADER_BUFDESC_LEN_SHIFT 0 -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_FMT_SHIFT 15 -#define HINIC_CMDQ_WQE_HEADER_DATA_FMT_SHIFT 22 -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_REQ_SHIFT 23 -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_SECT_LEN_SHIFT 27 -#define HINIC_CMDQ_WQE_HEADER_CTRL_LEN_SHIFT 29 -#define HINIC_CMDQ_WQE_HEADER_TOGGLED_WRAPPED_SHIFT 31 - -#define HINIC_CMDQ_WQE_HEADER_BUFDESC_LEN_MASK 0xFF -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_FMT_MASK 0x1 -#define HINIC_CMDQ_WQE_HEADER_DATA_FMT_MASK 0x1 -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_REQ_MASK 0x1 -#define HINIC_CMDQ_WQE_HEADER_COMPLETE_SECT_LEN_MASK 0x3 -#define HINIC_CMDQ_WQE_HEADER_CTRL_LEN_MASK 0x3 -#define HINIC_CMDQ_WQE_HEADER_TOGGLED_WRAPPED_MASK 0x1 - -#define HINIC_CMDQ_WQE_HEADER_SET(val, member) \ - (((u32)(val) & HINIC_CMDQ_WQE_HEADER_##member##_MASK) \ - << HINIC_CMDQ_WQE_HEADER_##member##_SHIFT) - -#define HINIC_CMDQ_WQE_HEADER_GET(val, member) \ - (((val) >> HINIC_CMDQ_WQE_HEADER_##member##_SHIFT) \ - & HINIC_CMDQ_WQE_HEADER_##member##_MASK) - -#define HINIC_SQ_CTRL_BUFDESC_SECT_LEN_SHIFT 0 -#define HINIC_SQ_CTRL_TASKSECT_LEN_SHIFT 16 -#define HINIC_SQ_CTRL_DATA_FORMAT_SHIFT 22 -#define HINIC_SQ_CTRL_LEN_SHIFT 29 - -#define HINIC_SQ_CTRL_BUFDESC_SECT_LEN_MASK 0xFF -#define HINIC_SQ_CTRL_TASKSECT_LEN_MASK 0x1F -#define HINIC_SQ_CTRL_DATA_FORMAT_MASK 0x1 -#define HINIC_SQ_CTRL_LEN_MASK 0x3 - -#define HINIC_SQ_CTRL_QUEUE_INFO_MSS_SHIFT 13 - -#define HINIC_SQ_CTRL_QUEUE_INFO_MSS_MASK 0x3FFF - -#define HINIC_SQ_CTRL_SET(val, member) \ - (((u32)(val) & HINIC_SQ_CTRL_##member##_MASK) \ - << HINIC_SQ_CTRL_##member##_SHIFT) - -#define HINIC_SQ_CTRL_GET(val, member) \ - (((val) >> HINIC_SQ_CTRL_##member##_SHIFT) \ - & HINIC_SQ_CTRL_##member##_MASK) - -#define HINIC_SQ_TASK_INFO0_L2HDR_LEN_SHIFT 0 -#define HINIC_SQ_TASK_INFO0_L4_OFFLOAD_SHIFT 8 -#define HINIC_SQ_TASK_INFO0_INNER_L3TYPE_SHIFT 10 -#define HINIC_SQ_TASK_INFO0_VLAN_OFFLOAD_SHIFT 12 -#define HINIC_SQ_TASK_INFO0_PARSE_FLAG_SHIFT 13 -/* 1 bit reserved */ -#define HINIC_SQ_TASK_INFO0_TSO_FLAG_SHIFT 15 -#define HINIC_SQ_TASK_INFO0_VLAN_TAG_SHIFT 16 - -#define HINIC_SQ_TASK_INFO0_L2HDR_LEN_MASK 0xFF -#define HINIC_SQ_TASK_INFO0_L4_OFFLOAD_MASK 0x3 -#define HINIC_SQ_TASK_INFO0_INNER_L3TYPE_MASK 0x3 -#define HINIC_SQ_TASK_INFO0_VLAN_OFFLOAD_MASK 0x1 -#define HINIC_SQ_TASK_INFO0_PARSE_FLAG_MASK 0x1 -/* 1 bit reserved */ -#define HINIC_SQ_TASK_INFO0_TSO_FLAG_MASK 0x1 -#define HINIC_SQ_TASK_INFO0_VLAN_TAG_MASK 0xFFFF - -#define HINIC_SQ_TASK_INFO0_SET(val, member) \ - (((u32)(val) & HINIC_SQ_TASK_INFO0_##member##_MASK) << \ - HINIC_SQ_TASK_INFO0_##member##_SHIFT) - -/* 8 bits reserved */ -#define HINIC_SQ_TASK_INFO1_MEDIA_TYPE_SHIFT 8 -#define HINIC_SQ_TASK_INFO1_INNER_L4_LEN_SHIFT 16 -#define HINIC_SQ_TASK_INFO1_INNER_L3_LEN_SHIFT 24 - -/* 8 bits reserved */ -#define HINIC_SQ_TASK_INFO1_MEDIA_TYPE_MASK 0xFF -#define HINIC_SQ_TASK_INFO1_INNER_L4_LEN_MASK 0xFF -#define HINIC_SQ_TASK_INFO1_INNER_L3_LEN_MASK 0xFF - -#define HINIC_SQ_TASK_INFO1_SET(val, member) \ - (((u32)(val) & HINIC_SQ_TASK_INFO1_##member##_MASK) << \ - HINIC_SQ_TASK_INFO1_##member##_SHIFT) - -#define HINIC_SQ_TASK_INFO2_TUNNEL_L4_LEN_SHIFT 0 -#define HINIC_SQ_TASK_INFO2_OUTER_L3_LEN_SHIFT 12 -#define HINIC_SQ_TASK_INFO2_TUNNEL_L4TYPE_SHIFT 19 -/* 1 bit reserved */ -#define HINIC_SQ_TASK_INFO2_OUTER_L3TYPE_SHIFT 22 -/* 8 bits reserved */ - -#define HINIC_SQ_TASK_INFO2_TUNNEL_L4_LEN_MASK 0xFFF -#define HINIC_SQ_TASK_INFO2_OUTER_L3_LEN_MASK 0x7F -#define HINIC_SQ_TASK_INFO2_TUNNEL_L4TYPE_MASK 0x3 -/* 1 bit reserved */ -#define HINIC_SQ_TASK_INFO2_OUTER_L3TYPE_MASK 0x3 -/* 8 bits reserved */ - -#define HINIC_SQ_TASK_INFO2_SET(val, member) \ - (((u32)(val) & HINIC_SQ_TASK_INFO2_##member##_MASK) << \ - HINIC_SQ_TASK_INFO2_##member##_SHIFT) - -/* 31 bits reserved */ -#define HINIC_SQ_TASK_INFO4_L2TYPE_SHIFT 31 - -/* 31 bits reserved */ -#define HINIC_SQ_TASK_INFO4_L2TYPE_MASK 0x1 - -#define HINIC_SQ_TASK_INFO4_SET(val, member) \ - (((u32)(val) & HINIC_SQ_TASK_INFO4_##member##_MASK) << \ - HINIC_SQ_TASK_INFO4_##member##_SHIFT) - -#define HINIC_RQ_CQE_STATUS_RXDONE_SHIFT 31 - -#define HINIC_RQ_CQE_STATUS_RXDONE_MASK 0x1 - -#define HINIC_RQ_CQE_STATUS_GET(val, member) \ - (((val) >> HINIC_RQ_CQE_STATUS_##member##_SHIFT) & \ - HINIC_RQ_CQE_STATUS_##member##_MASK) - -#define HINIC_RQ_CQE_STATUS_CLEAR(val, member) \ - ((val) & (~(HINIC_RQ_CQE_STATUS_##member##_MASK << \ - HINIC_RQ_CQE_STATUS_##member##_SHIFT))) - -#define HINIC_RQ_CQE_SGE_LEN_SHIFT 16 - -#define HINIC_RQ_CQE_SGE_LEN_MASK 0xFFFF - -#define HINIC_RQ_CQE_SGE_GET(val, member) \ - (((val) >> HINIC_RQ_CQE_SGE_##member##_SHIFT) & \ - HINIC_RQ_CQE_SGE_##member##_MASK) - -#define HINIC_RQ_CTRL_BUFDESC_SECT_LEN_SHIFT 0 -#define HINIC_RQ_CTRL_COMPLETE_FORMAT_SHIFT 15 -#define HINIC_RQ_CTRL_COMPLETE_LEN_SHIFT 27 -#define HINIC_RQ_CTRL_LEN_SHIFT 29 - -#define HINIC_RQ_CTRL_BUFDESC_SECT_LEN_MASK 0xFF -#define HINIC_RQ_CTRL_COMPLETE_FORMAT_MASK 0x1 -#define HINIC_RQ_CTRL_COMPLETE_LEN_MASK 0x3 -#define HINIC_RQ_CTRL_LEN_MASK 0x3 - -#define HINIC_RQ_CTRL_SET(val, member) \ - (((u32)(val) & HINIC_RQ_CTRL_##member##_MASK) << \ - HINIC_RQ_CTRL_##member##_SHIFT) - -#define HINIC_SQ_WQE_SIZE(nr_sges) \ - (sizeof(struct hinic_sq_ctrl) + \ - sizeof(struct hinic_sq_task) + \ - (nr_sges) * sizeof(struct hinic_sq_bufdesc)) - -#define HINIC_SCMD_DATA_LEN 16 - -#define HINIC_MAX_SQ_BUFDESCS 17 - -#define HINIC_SQ_WQE_MAX_SIZE 320 -#define HINIC_RQ_WQE_SIZE 32 - -enum hinic_l4offload_type { - HINIC_L4_OFF_DISABLE = 0, - HINIC_TCP_OFFLOAD_ENABLE = 1, - HINIC_SCTP_OFFLOAD_ENABLE = 2, - HINIC_UDP_OFFLOAD_ENABLE = 3, -}; - -enum hinic_vlan_offload { - HINIC_VLAN_OFF_DISABLE = 0, - HINIC_VLAN_OFF_ENABLE = 1, -}; - -enum hinic_pkt_parsed { - HINIC_PKT_NOT_PARSED = 0, - HINIC_PKT_PARSED = 1, -}; - -enum hinic_outer_l3type { - HINIC_OUTER_L3TYPE_UNKNOWN = 0, - HINIC_OUTER_L3TYPE_IPV6 = 1, - HINIC_OUTER_L3TYPE_IPV4_NO_CHKSUM = 2, - HINIC_OUTER_L3TYPE_IPV4_CHKSUM = 3, -}; - -enum hinic_media_type { - HINIC_MEDIA_UNKNOWN = 0, -}; - -enum hinic_l2type { - HINIC_L2TYPE_ETH = 0, -}; - -enum hinc_tunnel_l4type { - HINIC_TUNNEL_L4TYPE_UNKNOWN = 0, -}; - -struct hinic_cmdq_header { - u32 header_info; - u32 saved_data; -}; - -struct hinic_status { - u32 status_info; -}; - -struct hinic_ctrl { - u32 ctrl_info; -}; - -struct hinic_sge_resp { - struct hinic_sge sge; - u32 rsvd; -}; - -struct hinic_cmdq_completion { - /* HW Format */ - union { - struct hinic_sge_resp sge_resp; - u64 direct_resp; - }; -}; - -struct hinic_scmd_bufdesc { - u32 buf_len; - u32 rsvd; - u8 data[HINIC_SCMD_DATA_LEN]; -}; - -struct hinic_lcmd_bufdesc { - struct hinic_sge sge; - u32 rsvd1; - u64 rsvd2; - u64 rsvd3; -}; - -struct hinic_cmdq_wqe_scmd { - struct hinic_cmdq_header header; - u64 rsvd; - struct hinic_status status; - struct hinic_ctrl ctrl; - struct hinic_cmdq_completion completion; - struct hinic_scmd_bufdesc buf_desc; -}; - -struct hinic_cmdq_wqe_lcmd { - struct hinic_cmdq_header header; - struct hinic_status status; - struct hinic_ctrl ctrl; - struct hinic_cmdq_completion completion; - struct hinic_lcmd_bufdesc buf_desc; -}; - -struct hinic_cmdq_direct_wqe { - struct hinic_cmdq_wqe_scmd wqe_scmd; -}; - -struct hinic_cmdq_wqe { - /* HW Format */ - union { - struct hinic_cmdq_direct_wqe direct_wqe; - struct hinic_cmdq_wqe_lcmd wqe_lcmd; - }; -}; - -struct hinic_sq_ctrl { - u32 ctrl_info; - u32 queue_info; -}; - -struct hinic_sq_task { - u32 pkt_info0; - u32 pkt_info1; - u32 pkt_info2; - u32 ufo_v6_identify; - u32 pkt_info4; - u32 zero_pad; -}; - -struct hinic_sq_bufdesc { - struct hinic_sge sge; - u32 rsvd; -}; - -struct hinic_sq_wqe { - struct hinic_sq_ctrl ctrl; - struct hinic_sq_task task; - struct hinic_sq_bufdesc buf_descs[HINIC_MAX_SQ_BUFDESCS]; -}; - -struct hinic_rq_cqe { - u32 status; - u32 len; - - u32 rsvd2; - u32 rsvd3; - u32 rsvd4; - u32 rsvd5; - u32 rsvd6; - u32 rsvd7; -}; - -struct hinic_rq_ctrl { - u32 ctrl_info; -}; - -struct hinic_rq_cqe_sect { - struct hinic_sge sge; - u32 rsvd; -}; - -struct hinic_rq_bufdesc { - u32 hi_addr; - u32 lo_addr; -}; - -struct hinic_rq_wqe { - struct hinic_rq_ctrl ctrl; - u32 rsvd; - struct hinic_rq_cqe_sect cqe_sect; - struct hinic_rq_bufdesc buf_desc; -}; - -struct hinic_hw_wqe { - /* HW Format */ - union { - struct hinic_cmdq_wqe cmdq_wqe; - struct hinic_sq_wqe sq_wqe; - struct hinic_rq_wqe rq_wqe; - }; -}; - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.c b/drivers/net/ethernet/huawei/hinic/hinic_port.c deleted file mode 100644 index 4d4e3f0..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_port.c +++ /dev/null @@ -1,379 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#include <linux/types.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/if_vlan.h> -#include <linux/pci.h> -#include <linux/device.h> -#include <linux/errno.h> - -#include "hinic_hw_if.h" -#include "hinic_hw_dev.h" -#include "hinic_port.h" -#include "hinic_dev.h" - -#define HINIC_MIN_MTU_SIZE 256 -#define HINIC_MAX_JUMBO_FRAME_SIZE 15872 - -enum mac_op { - MAC_DEL, - MAC_SET, -}; - -/** - * change_mac - change(add or delete) mac address - * @nic_dev: nic device - * @addr: mac address - * @vlan_id: vlan number to set with the mac - * @op: add or delete the mac - * - * Return 0 - Success, negative - Failure - **/ -static int change_mac(struct hinic_dev *nic_dev, const u8 *addr, - u16 vlan_id, enum mac_op op) -{ - struct net_device *netdev = nic_dev->netdev; - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_mac_cmd port_mac_cmd; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - enum hinic_port_cmd cmd; - u16 out_size; - int err; - - if (vlan_id >= VLAN_N_VID) { - netif_err(nic_dev, drv, netdev, "Invalid VLAN number\n"); - return -EINVAL; - } - - if (op == MAC_SET) - cmd = HINIC_PORT_CMD_SET_MAC; - else - cmd = HINIC_PORT_CMD_DEL_MAC; - - port_mac_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - port_mac_cmd.vlan_id = vlan_id; - memcpy(port_mac_cmd.mac, addr, ETH_ALEN); - - err = hinic_port_msg_cmd(hwdev, cmd, &port_mac_cmd, - sizeof(port_mac_cmd), - &port_mac_cmd, &out_size); - if (err || (out_size != sizeof(port_mac_cmd)) || port_mac_cmd.status) { - dev_err(&pdev->dev, "Failed to change MAC, ret = %d\n", - port_mac_cmd.status); - return -EFAULT; - } - - return 0; -} - -/** - * hinic_port_add_mac - add mac address - * @nic_dev: nic device - * @addr: mac address - * @vlan_id: vlan number to set with the mac - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_add_mac(struct hinic_dev *nic_dev, - const u8 *addr, u16 vlan_id) -{ - return change_mac(nic_dev, addr, vlan_id, MAC_SET); -} - -/** - * hinic_port_del_mac - remove mac address - * @nic_dev: nic device - * @addr: mac address - * @vlan_id: vlan number that is connected to the mac - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_del_mac(struct hinic_dev *nic_dev, const u8 *addr, - u16 vlan_id) -{ - return change_mac(nic_dev, addr, vlan_id, MAC_DEL); -} - -/** - * hinic_port_get_mac - get the mac address of the nic device - * @nic_dev: nic device - * @addr: returned mac address - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_get_mac(struct hinic_dev *nic_dev, u8 *addr) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_mac_cmd port_mac_cmd; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - port_mac_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_MAC, - &port_mac_cmd, sizeof(port_mac_cmd), - &port_mac_cmd, &out_size); - if (err || (out_size != sizeof(port_mac_cmd)) || port_mac_cmd.status) { - dev_err(&pdev->dev, "Failed to get mac, ret = %d\n", - port_mac_cmd.status); - return -EFAULT; - } - - memcpy(addr, port_mac_cmd.mac, ETH_ALEN); - return 0; -} - -/** - * hinic_port_set_mtu - set mtu - * @nic_dev: nic device - * @new_mtu: new mtu - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_set_mtu(struct hinic_dev *nic_dev, int new_mtu) -{ - struct net_device *netdev = nic_dev->netdev; - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_mtu_cmd port_mtu_cmd; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - int err, max_frame; - u16 out_size; - - if (new_mtu < HINIC_MIN_MTU_SIZE) { - netif_err(nic_dev, drv, netdev, "mtu < MIN MTU size"); - return -EINVAL; - } - - max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; - if (max_frame > HINIC_MAX_JUMBO_FRAME_SIZE) { - netif_err(nic_dev, drv, netdev, "mtu > MAX MTU size"); - return -EINVAL; - } - - port_mtu_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - port_mtu_cmd.mtu = new_mtu; - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_CHANGE_MTU, - &port_mtu_cmd, sizeof(port_mtu_cmd), - &port_mtu_cmd, &out_size); - if (err || (out_size != sizeof(port_mtu_cmd)) || port_mtu_cmd.status) { - dev_err(&pdev->dev, "Failed to set mtu, ret = %d\n", - port_mtu_cmd.status); - return -EFAULT; - } - - return 0; -} - -/** - * hinic_port_add_vlan - add vlan to the nic device - * @nic_dev: nic device - * @vlan_id: the vlan number to add - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_add_vlan(struct hinic_dev *nic_dev, u16 vlan_id) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_vlan_cmd port_vlan_cmd; - - port_vlan_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwdev->hwif); - port_vlan_cmd.vlan_id = vlan_id; - - return hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_ADD_VLAN, - &port_vlan_cmd, sizeof(port_vlan_cmd), - NULL, NULL); -} - -/** - * hinic_port_del_vlan - delete vlan from the nic device - * @nic_dev: nic device - * @vlan_id: the vlan number to delete - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_del_vlan(struct hinic_dev *nic_dev, u16 vlan_id) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_vlan_cmd port_vlan_cmd; - - port_vlan_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwdev->hwif); - port_vlan_cmd.vlan_id = vlan_id; - - return hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_DEL_VLAN, - &port_vlan_cmd, sizeof(port_vlan_cmd), - NULL, NULL); -} - -/** - * hinic_port_set_rx_mode - set rx mode in the nic device - * @nic_dev: nic device - * @rx_mode: the rx mode to set - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_set_rx_mode(struct hinic_dev *nic_dev, u32 rx_mode) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_rx_mode_cmd rx_mode_cmd; - - rx_mode_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwdev->hwif); - rx_mode_cmd.rx_mode = rx_mode; - - return hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_RX_MODE, - &rx_mode_cmd, sizeof(rx_mode_cmd), - NULL, NULL); -} - -/** - * hinic_port_link_state - get the link state - * @nic_dev: nic device - * @link_state: the returned link state - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_link_state(struct hinic_dev *nic_dev, - enum hinic_port_link_state *link_state) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_hwif *hwif = hwdev->hwif; - struct hinic_port_link_cmd link_cmd; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "unsupported PCI Function type\n"); - return -EINVAL; - } - - link_cmd.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_LINK_STATE, - &link_cmd, sizeof(link_cmd), - &link_cmd, &out_size); - if (err || (out_size != sizeof(link_cmd)) || link_cmd.status) { - dev_err(&pdev->dev, "Failed to get link state, ret = %d\n", - link_cmd.status); - return -EINVAL; - } - - *link_state = link_cmd.state; - return 0; -} - -/** - * hinic_port_set_state - set port state - * @nic_dev: nic device - * @state: the state to set - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_set_state(struct hinic_dev *nic_dev, enum hinic_port_state state) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_port_state_cmd port_state; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "unsupported PCI Function type\n"); - return -EINVAL; - } - - port_state.state = state; - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_PORT_STATE, - &port_state, sizeof(port_state), - &port_state, &out_size); - if (err || (out_size != sizeof(port_state)) || port_state.status) { - dev_err(&pdev->dev, "Failed to set port state, ret = %d\n", - port_state.status); - return -EFAULT; - } - - return 0; -} - -/** - * hinic_port_set_func_state- set func device state - * @nic_dev: nic device - * @state: the state to set - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_set_func_state(struct hinic_dev *nic_dev, - enum hinic_func_port_state state) -{ - struct hinic_port_func_state_cmd func_state; - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - func_state.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - func_state.state = state; - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_SET_FUNC_STATE, - &func_state, sizeof(func_state), - &func_state, &out_size); - if (err || (out_size != sizeof(func_state)) || func_state.status) { - dev_err(&pdev->dev, "Failed to set port func state, ret = %d\n", - func_state.status); - return -EFAULT; - } - - return 0; -} - -/** - * hinic_port_get_cap - get port capabilities - * @nic_dev: nic device - * @port_cap: returned port capabilities - * - * Return 0 - Success, negative - Failure - **/ -int hinic_port_get_cap(struct hinic_dev *nic_dev, - struct hinic_port_cap *port_cap) -{ - struct hinic_hwdev *hwdev = nic_dev->hwdev; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - u16 out_size; - int err; - - port_cap->func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - err = hinic_port_msg_cmd(hwdev, HINIC_PORT_CMD_GET_CAP, - port_cap, sizeof(*port_cap), - port_cap, &out_size); - if (err || (out_size != sizeof(*port_cap)) || port_cap->status) { - dev_err(&pdev->dev, - "Failed to get port capabilities, ret = %d\n", - port_cap->status); - return -EINVAL; - } - - return 0; -} diff --git a/drivers/net/ethernet/huawei/hinic/hinic_port.h b/drivers/net/ethernet/huawei/hinic/hinic_port.h deleted file mode 100644 index 9404365..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_port.h +++ /dev/null @@ -1,198 +0,0 @@ -/* - * Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef HINIC_PORT_H -#define HINIC_PORT_H - -#include <linux/types.h> -#include <linux/etherdevice.h> -#include <linux/bitops.h> - -#include "hinic_dev.h" - -enum hinic_rx_mode { - HINIC_RX_MODE_UC = BIT(0), - HINIC_RX_MODE_MC = BIT(1), - HINIC_RX_MODE_BC = BIT(2), - HINIC_RX_MODE_MC_ALL = BIT(3), - HINIC_RX_MODE_PROMISC = BIT(4), -}; - -enum hinic_port_link_state { - HINIC_LINK_STATE_DOWN, - HINIC_LINK_STATE_UP, -}; - -enum hinic_port_state { - HINIC_PORT_DISABLE = 0, - HINIC_PORT_ENABLE = 3, -}; - -enum hinic_func_port_state { - HINIC_FUNC_PORT_DISABLE = 0, - HINIC_FUNC_PORT_ENABLE = 2, -}; - -enum hinic_autoneg_cap { - HINIC_AUTONEG_UNSUPPORTED, - HINIC_AUTONEG_SUPPORTED, -}; - -enum hinic_autoneg_state { - HINIC_AUTONEG_DISABLED, - HINIC_AUTONEG_ACTIVE, -}; - -enum hinic_duplex { - HINIC_DUPLEX_HALF, - HINIC_DUPLEX_FULL, -}; - -enum hinic_speed { - HINIC_SPEED_10MB_LINK = 0, - HINIC_SPEED_100MB_LINK, - HINIC_SPEED_1000MB_LINK, - HINIC_SPEED_10GB_LINK, - HINIC_SPEED_25GB_LINK, - HINIC_SPEED_40GB_LINK, - HINIC_SPEED_100GB_LINK, - - HINIC_SPEED_UNKNOWN = 0xFF, -}; - -struct hinic_port_mac_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 vlan_id; - u16 rsvd1; - unsigned char mac[ETH_ALEN]; -}; - -struct hinic_port_mtu_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 rsvd1; - u32 mtu; -}; - -struct hinic_port_vlan_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 vlan_id; -}; - -struct hinic_port_rx_mode_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 rsvd; - u32 rx_mode; -}; - -struct hinic_port_link_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u8 state; - u8 rsvd1; -}; - -struct hinic_port_state_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u8 state; - u8 rsvd1[3]; -}; - -struct hinic_port_link_status { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 rsvd1; - u8 link; - u8 rsvd2; -}; - -struct hinic_port_func_state_cmd { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 rsvd1; - u8 state; - u8 rsvd2[3]; -}; - -struct hinic_port_cap { - u8 status; - u8 version; - u8 rsvd0[6]; - - u16 func_idx; - u16 rsvd1; - u8 port_type; - u8 autoneg_cap; - u8 autoneg_state; - u8 duplex; - u8 speed; - u8 rsvd2[3]; -}; - -int hinic_port_add_mac(struct hinic_dev *nic_dev, const u8 *addr, - u16 vlan_id); - -int hinic_port_del_mac(struct hinic_dev *nic_dev, const u8 *addr, - u16 vlan_id); - -int hinic_port_get_mac(struct hinic_dev *nic_dev, u8 *addr); - -int hinic_port_set_mtu(struct hinic_dev *nic_dev, int new_mtu); - -int hinic_port_add_vlan(struct hinic_dev *nic_dev, u16 vlan_id); - -int hinic_port_del_vlan(struct hinic_dev *nic_dev, u16 vlan_id); - -int hinic_port_set_rx_mode(struct hinic_dev *nic_dev, u32 rx_mode); - -int hinic_port_link_state(struct hinic_dev *nic_dev, - enum hinic_port_link_state *link_state); - -int hinic_port_set_state(struct hinic_dev *nic_dev, - enum hinic_port_state state); - -int hinic_port_set_func_state(struct hinic_dev *nic_dev, - enum hinic_func_port_state state); - -int hinic_port_get_cap(struct hinic_dev *nic_dev, - struct hinic_port_cap *port_cap); - -#endif diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sml_table.h b/drivers/net/ethernet/huawei/hinic/hinic_sml_table.h deleted file mode 100644 index b837dab..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_sml_table.h +++ /dev/null @@ -1,2728 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0*/ -/* Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef __SML_TABLE_H__ -#define __SML_TABLE_H__ - -#include "hinic_sml_table_pub.h" - -#ifdef __cplusplus -#if __cplusplus -extern "C" { -#endif -#endif /* __cplusplus */ - -#define TBL_ID_CTR_DFX_S32_SM_NODE 11 -#define TBL_ID_CTR_DFX_S32_SM_INST 20 - -#define TBL_ID_CTR_DFX_PAIR_SM_NODE 10 -#define TBL_ID_CTR_DFX_PAIR_SM_INST 24 - -#define TBL_ID_CTR_DFX_S64_SM_NODE 11 -#define TBL_ID_CTR_DFX_S64_SM_INST 21 - -#if (!defined(__UP_FPGA__) && (!defined(HI1822_MODE_FPGA)) && \ - (!defined(__FPGA__))) - -#define TBL_ID_GLOBAL_SM_NODE 10 -#define TBL_ID_GLOBAL_SM_INST 1 - -#define TBL_ID_PORT_CFG_SM_NODE 10 -#define TBL_ID_PORT_CFG_SM_INST 2 - -#define TBL_ID_VLAN_SM_NODE 10 -#define TBL_ID_VLAN_SM_INST 3 - -#define TBL_ID_MULTICAST_SM_NODE 10 -#define TBL_ID_MULTICAST_SM_INST 4 - -#define TBL_ID_MISC_RSS_HASH0_SM_NODE 10 -#define TBL_ID_MISC_RSS_HASH0_SM_INST 5 - -#define TBL_ID_FIC_VOQ_MAP_SM_NODE 10 -#define TBL_ID_FIC_VOQ_MAP_SM_INST 6 - -#define TBL_ID_CAR_SM_NODE 10 -#define TBL_ID_CAR_SM_INST 7 - -#define TBL_ID_IPMAC_FILTER_SM_NODE 10 -#define TBL_ID_IPMAC_FILTER_SM_INST 8 - -#define TBL_ID_GLOBAL_QUE_MAP_SM_NODE 10 -#define TBL_ID_GLOBAL_QUE_MAP_SM_INST 9 - -#define TBL_ID_CTR_VSW_FUNC_MIB_SM_NODE 10 -#define TBL_ID_CTR_VSW_FUNC_MIB_SM_INST 10 - -#define TBL_ID_UCODE_EXEC_INFO_SM_NODE 10 -#define TBL_ID_UCODE_EXEC_INFO_SM_INST 11 - -#define TBL_ID_RQ_IQ_MAPPING_SM_NODE 10 -#define TBL_ID_RQ_IQ_MAPPING_SM_INST 12 - -#define TBL_ID_MAC_SM_NODE 10 -#define TBL_ID_MAC_SM_INST 21 - -#define TBL_ID_MAC_BHEAP_SM_NODE 10 -#define TBL_ID_MAC_BHEAP_SM_INST 22 - -#define TBL_ID_MAC_MISC_SM_NODE 10 -#define TBL_ID_MAC_MISC_SM_INST 23 - -#define TBL_ID_FUNC_CFG_SM_NODE 11 -#define TBL_ID_FUNC_CFG_SM_INST 1 - -#define TBL_ID_TRUNK_FWD_SM_NODE 11 -#define TBL_ID_TRUNK_FWD_SM_INST 2 - -#define TBL_ID_VLAN_FILTER_SM_NODE 11 -#define TBL_ID_VLAN_FILTER_SM_INST 3 - -#define TBL_ID_ELB_SM_NODE 11 -#define TBL_ID_ELB_SM_INST 4 - -#define TBL_ID_MISC_RSS_HASH1_SM_NODE 11 -#define TBL_ID_MISC_RSS_HASH1_SM_INST 5 - -#define TBL_ID_RSS_CONTEXT_SM_NODE 11 -#define TBL_ID_RSS_CONTEXT_SM_INST 6 - -#define TBL_ID_ETHERTYPE_FILTER_SM_NODE 11 -#define TBL_ID_ETHERTYPE_FILTER_SM_INST 7 - -#define TBL_ID_VTEP_IP_SM_NODE 11 -#define TBL_ID_VTEP_IP_SM_INST 8 - -#define TBL_ID_NAT_SM_NODE 11 -#define TBL_ID_NAT_SM_INST 9 - -#define TBL_ID_BHEAP_LRO_AGING_SM_NODE 11 -#define TBL_ID_BHEAP_LRO_AGING_SM_INST 10 - -#define TBL_ID_MISC_LRO_AGING_SM_NODE 11 -#define TBL_ID_MISC_LRO_AGING_SM_INST 11 - -#define TBL_ID_BHEAP_CQE_AGING_SM_NODE 11 -#define TBL_ID_BHEAP_CQE_AGING_SM_INST 12 - -#define TBL_ID_MISC_CQE_AGING_SM_NODE 11 -#define TBL_ID_MISC_CQE_AGING_SM_INST 13 - -#define TBL_ID_DFX_LOG_POINTER_SM_NODE 11 -#define TBL_ID_DFX_LOG_POINTER_SM_INST 14 - -#define TBL_ID_CTR_VSW_FUNC_S32_DROP_ERR_SM_NODE 11 -#define TBL_ID_CTR_VSW_FUNC_S32_DROP_ERR_SM_INST 15 - -#define TBL_ID_CTR_VSW_FUNC_S32_DFX_SM_NODE 11 -#define TBL_ID_CTR_VSW_FUNC_S32_DFX_SM_INST 16 - -#define TBL_ID_CTR_COMM_FUNC_S32_SM_NODE 11 -#define TBL_ID_CTR_COMM_FUNC_S32_SM_INST 17 - -#define TBL_ID_CTR_SRIOV_FUNC_PAIR_SM_NODE 11 -#define TBL_ID_CTR_SRIOV_FUNC_PAIR_SM_INST 41 - -#define TBL_ID_CTR_SRIOV_FUNC_S32_SM_NODE 11 -#define TBL_ID_CTR_SRIOV_FUNC_S32_SM_INST 42 - -#define TBL_ID_CTR_OVS_FUNC_S64_SM_NODE 11 -#define TBL_ID_CTR_OVS_FUNC_S64_SM_INST 43 - -#define TBL_ID_CTR_XOE_FUNC_PAIR_SM_NODE 11 -#define TBL_ID_CTR_XOE_FUNC_PAIR_SM_INST 44 - -#define TBL_ID_CTR_XOE_FUNC_S32_SM_NODE 11 -#define TBL_ID_CTR_XOE_FUNC_S32_SM_INST 45 - -#define TBL_ID_CTR_SYS_GLB_S32_SM_NODE 11 -#define TBL_ID_CTR_SYS_GLB_S32_SM_INST 46 - -#define TBL_ID_CTR_VSW_GLB_S32_SM_NODE 11 -#define TBL_ID_CTR_VSW_GLB_S32_SM_INST 47 - -#define TBL_ID_CTR_ROCE_GLB_S32_SM_NODE 11 -#define TBL_ID_CTR_ROCE_GLB_S32_SM_INST 48 - -#define TBL_ID_CTR_COMM_GLB_S32_SM_NODE 11 -#define TBL_ID_CTR_COMM_GLB_S32_SM_INST 49 - -#define TBL_ID_CTR_XOE_GLB_S32_SM_NODE 11 -#define TBL_ID_CTR_XOE_GLB_S32_SM_INST 50 - -#define TBL_ID_CTR_OVS_GLB_S64_SM_NODE 11 -#define TBL_ID_CTR_OVS_GLB_S64_SM_INST 51 - -#define TBL_ID_RWLOCK_ROCE_SM_NODE 11 -#define TBL_ID_RWLOCK_ROCE_SM_INST 30 - -#define TBL_ID_CQE_ADDR_SM_NODE 11 -#define TBL_ID_CQE_ADDR_SM_INST 31 - -#else - -#define TBL_ID_GLOBAL_SM_NODE 10 -#define TBL_ID_GLOBAL_SM_INST 1 - -#define TBL_ID_PORT_CFG_SM_NODE 10 -#define TBL_ID_PORT_CFG_SM_INST 2 - -#define TBL_ID_VLAN_SM_NODE 10 -#define TBL_ID_VLAN_SM_INST 3 - -#define TBL_ID_MULTICAST_SM_NODE 10 -#define TBL_ID_MULTICAST_SM_INST 4 - -#define TBL_ID_MISC_RSS_HASH0_SM_NODE 10 -#define TBL_ID_MISC_RSS_HASH0_SM_INST 5 - -#define TBL_ID_FIC_VOQ_MAP_SM_NODE 10 -#define TBL_ID_FIC_VOQ_MAP_SM_INST 6 - -#define TBL_ID_CAR_SM_NODE 10 -#define TBL_ID_CAR_SM_INST 7 - -#define TBL_ID_IPMAC_FILTER_SM_NODE 10 -#define TBL_ID_IPMAC_FILTER_SM_INST 8 - -#define TBL_ID_GLOBAL_QUE_MAP_SM_NODE 10 -#define TBL_ID_GLOBAL_QUE_MAP_SM_INST 9 - -#define TBL_ID_CTR_VSW_FUNC_MIB_SM_NODE 10 -#define TBL_ID_CTR_VSW_FUNC_MIB_SM_INST 10 - -#define TBL_ID_UCODE_EXEC_INFO_SM_NODE 10 -#define TBL_ID_UCODE_EXEC_INFO_SM_INST 11 - -#define TBL_ID_RQ_IQ_MAPPING_SM_NODE 10 -#define TBL_ID_RQ_IQ_MAPPING_SM_INST 12 - -#define TBL_ID_MAC_SM_NODE 10 -#define TBL_ID_MAC_SM_INST 13 - -#define TBL_ID_MAC_BHEAP_SM_NODE 10 -#define TBL_ID_MAC_BHEAP_SM_INST 14 - -#define TBL_ID_MAC_MISC_SM_NODE 10 -#define TBL_ID_MAC_MISC_SM_INST 15 - -#define TBL_ID_FUNC_CFG_SM_NODE 10 -#define TBL_ID_FUNC_CFG_SM_INST 16 - -#define TBL_ID_TRUNK_FWD_SM_NODE 10 -#define TBL_ID_TRUNK_FWD_SM_INST 17 - -#define TBL_ID_VLAN_FILTER_SM_NODE 10 -#define TBL_ID_VLAN_FILTER_SM_INST 18 - -#define TBL_ID_ELB_SM_NODE 10 -#define TBL_ID_ELB_SM_INST 19 - -#define TBL_ID_MISC_RSS_HASH1_SM_NODE 10 -#define TBL_ID_MISC_RSS_HASH1_SM_INST 20 - -#define TBL_ID_RSS_CONTEXT_SM_NODE 10 -#define TBL_ID_RSS_CONTEXT_SM_INST 21 - -#define TBL_ID_ETHERTYPE_FILTER_SM_NODE 10 -#define TBL_ID_ETHERTYPE_FILTER_SM_INST 22 - -#define TBL_ID_VTEP_IP_SM_NODE 10 -#define TBL_ID_VTEP_IP_SM_INST 23 - -#define TBL_ID_NAT_SM_NODE 10 -#define TBL_ID_NAT_SM_INST 24 - -#define TBL_ID_BHEAP_LRO_AGING_SM_NODE 10 -#define TBL_ID_BHEAP_LRO_AGING_SM_INST 25 - -#define TBL_ID_MISC_LRO_AGING_SM_NODE 10 -#define TBL_ID_MISC_LRO_AGING_SM_INST 26 - -#define TBL_ID_BHEAP_CQE_AGING_SM_NODE 10 -#define TBL_ID_BHEAP_CQE_AGING_SM_INST 27 - -#define TBL_ID_MISC_CQE_AGING_SM_NODE 10 -#define TBL_ID_MISC_CQE_AGING_SM_INST 28 - -#define TBL_ID_DFX_LOG_POINTER_SM_NODE 10 -#define TBL_ID_DFX_LOG_POINTER_SM_INST 29 - -#define TBL_ID_CTR_VSW_FUNC_S32_DROP_ERR_SM_NODE 10 -#define TBL_ID_CTR_VSW_FUNC_S32_DROP_ERR_SM_INST 40 - -#define TBL_ID_CTR_VSW_FUNC_S32_DFX_SM_NODE 10 -#define TBL_ID_CTR_VSW_FUNC_S32_DFX_SM_INST 41 - -#define TBL_ID_CTR_COMM_FUNC_S32_SM_NODE 10 -#define TBL_ID_CTR_COMM_FUNC_S32_SM_INST 42 - -#define TBL_ID_CTR_SRIOV_FUNC_PAIR_SM_NODE 10 -#define TBL_ID_CTR_SRIOV_FUNC_PAIR_SM_INST 43 - -#define TBL_ID_CTR_SRIOV_FUNC_S32_SM_NODE 10 -#define TBL_ID_CTR_SRIOV_FUNC_S32_SM_INST 44 - -#define TBL_ID_CTR_OVS_FUNC_S64_SM_NODE 10 -#define TBL_ID_CTR_OVS_FUNC_S64_SM_INST 45 - -#define TBL_ID_CTR_XOE_FUNC_PAIR_SM_NODE 10 -#define TBL_ID_CTR_XOE_FUNC_PAIR_SM_INST 46 - -#define TBL_ID_CTR_XOE_FUNC_S32_SM_NODE 10 -#define TBL_ID_CTR_XOE_FUNC_S32_SM_INST 47 - -#define TBL_ID_CTR_SYS_GLB_S32_SM_NODE 10 -#define TBL_ID_CTR_SYS_GLB_S32_SM_INST 48 - -#define TBL_ID_CTR_VSW_GLB_S32_SM_NODE 10 -#define TBL_ID_CTR_VSW_GLB_S32_SM_INST 49 - -#define TBL_ID_CTR_ROCE_GLB_S32_SM_NODE 10 -#define TBL_ID_CTR_ROCE_GLB_S32_SM_INST 50 - -#define TBL_ID_CTR_COMM_GLB_S32_SM_NODE 10 -#define TBL_ID_CTR_COMM_GLB_S32_SM_INST 51 - -#define TBL_ID_CTR_XOE_GLB_S32_SM_NODE 10 -#define TBL_ID_CTR_XOE_GLB_S32_SM_INST 52 - -#define TBL_ID_CTR_OVS_GLB_S64_SM_NODE 10 -#define TBL_ID_CTR_OVS_GLB_S64_SM_INST 53 - -#define TBL_ID_RWLOCK_ROCE_SM_NODE 10 -#define TBL_ID_RWLOCK_ROCE_SM_INST 30 - -#define TBL_ID_CQE_ADDR_SM_NODE 10 -#define TBL_ID_CQE_ADDR_SM_INST 31 - -#endif - -#define TBL_ID_MISC_RSS_HASH_SM_NODE TBL_ID_MISC_RSS_HASH0_SM_NODE -#define TBL_ID_MISC_RSS_HASH_SM_INST TBL_ID_MISC_RSS_HASH0_SM_INST - -/*rx cqe checksum err*/ -#define NIC_RX_CSUM_IP_CSUM_ERR BIT(0) -#define NIC_RX_CSUM_TCP_CSUM_ERR BIT(1) -#define NIC_RX_CSUM_UDP_CSUM_ERR BIT(2) -#define NIC_RX_CSUM_IGMP_CSUM_ERR BIT(3) -#define NIC_RX_CSUM_ICMPV4_CSUM_ERR BIT(4) -#define NIC_RX_CSUM_ICMPV6_CSUM_ERR BIT(5) -#define NIC_RX_CSUM_SCTP_CRC_ERR BIT(6) -#define NIC_RX_CSUM_HW_BYPASS_ERR BIT(7) - -typedef struct tag_log_ctrl { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 mod_name:4; - u32 log_level:4; - u32 rsvd:8; - u32 line_num:16; -#else - u32 line_num:16; - u32 rsvd:8; - u32 log_level:4; - u32 mod_name:4; -#endif -} log_ctrl; - -/** - * 1. bank GPA address is HOST-based, every host has 4 bank GPA, - * total size 4*32B - * 2. Allocated space for storing - * Two global entry are allocated for storing bank GPA, - * which are index5 and index6. (Note index start value is 0) - * The index5 top 32B store the bank GPA of host 0; - * Remain 32B store the bank GPA of host 1. - * The index6 top 32B store the bank GPA of host 2, - * the remain 32B store the bank GPA of host 3. - * Bank GPA corresponding to the each host is based on the following format) - */ -typedef struct tag_sml_global_bank_gpa { - u32 bank0_gpa_h32; - u32 bank0_gpa_l32; - - u32 bank1_gpa_h32; - u32 bank1_gpa_l32; - - u32 bank2_gpa_h32; - u32 bank2_gpa_l32; - - u32 bank3_gpa_h32; - u32 bank3_gpa_l32; -} global_bank_gpa_s; - -/** - * Struct name: sml_global_table_s - * @brief: global_table structure - * Description: global configuration table - */ -typedef struct tag_sml_global_table { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 port_mode:1; /*portmode:0-eth;1-fic */ - /* dualplaneenable:0-disable;1-enable */ - u32 dual_plane_en:1; - /* fourrouteenable:0-disable;1-enable */ - u32 four_route_en:1; - /* ficworkmode:0-fabric;1-fullmesh.*/ - u32 fic_work_mode:1; - /* unicast/multicastmode:0-drop; - * 1-broadcastinvlandomain - */ - u32 un_mc_mode:1; - /* maclearnenable:1-enable */ - u32 mac_learn_en:1; - u32 qcn_en:1; - u32 esl_run_flag:1; - /* 1-special protocal pkt to up; 0-to x86 */ - u32 special_pro_to_up_flag:1; - u32 vf_mask:4; - u32 dif_ser_type:2; - u32 rsvd0:1; - u32 board_num:16; /*boardnumber */ -#else - u32 board_num:16; /*boardnumber */ - u32 rsvd0:1; - u32 dif_ser_type:2; - u32 vf_mask:4; - /*1-special protocal pkt to up; 0-to x86 */ - u32 special_pro_to_up_flag:1; - u32 esl_run_flag:1; - u32 qcn_en:1; - u32 mac_learn_en:1; /*maclearnenable:1-enable */ - /*unicast/multicastmode:0-drop;1-broadcastinvlandomain*/ - u32 un_mc_mode:1; - /* ficworkmode:0-fabric;1-fullmesh.*/ - u32 fic_work_mode:1; - /*fourrouteenable:0-disable;1-enable */ - u32 four_route_en:1; - /*dualplaneenable:0-disable;1-enable */ - u32 dual_plane_en:1; - u32 port_mode:1; /*portmode:0-eth;1-fic */ -#endif - } bs; - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 bc_offset:16; /*broadcastoffset */ - u32 mc_offset:16; /*multicastoffset */ -#else - u32 mc_offset:16; /*multicastoffset */ - u32 bc_offset:16; /*broadcastoffset */ -#endif - } bs; - u32 value; - } dw1; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 net_src_type:8; /* eth-FWD_PORT, fic-FWD_FIC */ - u32 xrc_pl_dec:1; - u32 sq_cqn:20; - u32 qpc_stg:1; - u32 qpc_state_err:1; - u32 qpc_wb_flag:1; -#else - u32 qpc_wb_flag:1; - u32 qpc_state_err:1; - u32 qpc_stg:1; - u32 sq_cqn:20; - u32 xrc_pl_dec:1; - u32 net_src_type:8; /* eth-FWD_PORT, fic-FWD_FIC */ -#endif - } bs; - - u32 value; - } dw2; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 drop_cause_id:16; - u32 pkt_len:16; -#else - u32 pkt_len:16; - u32 drop_cause_id:16; -#endif - } bs; - - u32 value; - } dw3; - - u8 fcoe_vf_table[12]; - - union { - struct { - /* [31:30]Pipeline number mode. */ - u32 cfg_mode_pn:2; - /* [29:28]initial default fq mode for traffic - * from rx side - */ - u32 cfg_mode_init_def_fq:2; - /* [27:16]base fqid for initial default fqs - * (for packest from rx side only). - */ - u32 cfg_base_init_def_fq:12; - /* [15:15]push doorbell as new packet to tile - * via command path enable. - */ - u32 cfg_psh_msg_en:1; - /* [14:14]1,enable asc for scanning - * active fq.0,disable. - */ - u32 enable_asc:1; - /* [13:13]1,enable pro for commands process.0,disable.*/ - u32 enable_pro:1; - /* [12:12]1,ngsf mode.0,ethernet mode. */ - u32 cfg_ngsf_mod:1; - /* [11:11]Stateful process enable. */ - u32 enable_stf:1; - /* [10:9]initial default fq mode for - * traffic from tx side. - */ - u32 cfg_mode_init_def_fq_tx:2; - /* [8:0]maximum allocable oeid configuration. */ - u32 cfg_max_oeid:9; - } bs; - u32 value; - } fq_mode; - - u32 rsvd2[8]; -} sml_global_table_s; - -/** - * Struct name: sml_fic_config_table_s - * @brief: global_table structure - * Description: global configuration table - */ -typedef struct tag_sml_fic_config_table { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /*dualplaneenable:0-disable;1-enable */ - u32 dual_plane_en:1; - /*fourrouteenable:0-disable;1-enable */ - u32 four_route_en:1; - /* ficworkmode:0-fabric;1-fullmesh.*/ - u32 fic_work_mode:1; - u32 mac_learn_en:1; /*maclearnenable:1-enable */ - u32 rsvd:12; - u32 board_num:16; /*boardnumber */ -#else - u32 board_num:16; /*boardnumber */ - u32 rsvd:12; - u32 mac_learn_en:1; - /* ficworkmode:0-fabric;1-fullmesh.*/ - u32 fic_work_mode:1; - /* fourrouteenable:0-disable;1-enable */ - u32 four_route_en:1; - /* dualplaneenable:0-disable;1-enable */ - u32 dual_plane_en:1; -#endif - } bs; - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 bc_offset:16; /*broadcastoffset */ - u32 mc_offset:16; /*multicastoffset */ -#else - u32 mc_offset:16; /*multicastoffset */ - u32 bc_offset:16; /*broadcastoffset */ -#endif - } bs; - u32 value; - } dw1; - - u32 rsvd2[14]; -} sml_fic_config_table_s; - -/** - * Struct name: sml_ucode_version_info_table_s - * @brief: microcode version information structure - * Description: global configuration table entry data structure of index 1 - */ -typedef struct tag_sml_ucode_version_info_table { - u32 ucode_version[4]; - u32 ucode_compile_time[5]; - u32 rsvd[7]; -} sml_ucode_version_info_table_s; - -/** - * Struct name: sml_funcfg_tbl_s - * @brief: Function Configuration Table - * Description: Function Configuration attribute table - */ -typedef struct tag_sml_funcfg_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* function valid: 0-invalid; 1-valid */ - u32 valid:1; - /* mac learn enable: 0-disable; 1-enable */ - u32 learn_en:1; - /* lli enable: 0-disable; 1-enable */ - u32 lli_en:1; - /* rss enable: 0-disable; 1-enable */ - u32 rss_en:1; - /* rx vlan offload enable: 0-disable; 1-enable */ - u32 rxvlan_offload_en:1; - /* tso local coalesce enable: 0-disable; 1-enable */ - u32 tso_local_coalesce:1; - u32 rsvd1:1; - u32 rsvd2:1; - /* qos rx car enable: 0-disable; 1-enable */ - u32 qos_rx_car_en:1; - /* mac filter enable: 0-disable; 1-enable */ - u32 mac_filter_en:1; - /* ipmac filter enable: 0-disable; 1-enable */ - u32 ipmac_filter_en:1; - /* ethtype filter enable: 0-disable; 1-enable */ - u32 ethtype_filter_en:1; - /* mc bc limit enable: 0-disable; 1-enable */ - u32 mc_bc_limit_en:1; - /* acl tx enable: 0-disable; 1-enable */ - u32 acl_tx_en:1; - /* acl rx enable: 0-disable; 1-enable */ - u32 acl_rx_en:1; - /* ovs function enable: 0-disable; 1-enable */ - u32 ovs_func_en:1; - /* ucode capture enable: 0-disable; 1-enable */ - u32 ucapture_en:1; - /* fic car enable: 0-disable; 1-enable */ - u32 fic_car_en:1; - u32 tso_en:1; - u32 nic_rx_mode:5; /* nic_rx_mode: - * 0b00001: unicast mode - * 0b00010: multicast mode - * 0b00100: broadcast mode - * 0b01000: all multicast mode - * 0b10000: promisc mod - */ - u32 rsvd4:3; - u32 def_pri:3; /* default priority */ - /* host id: [0~3]. support up to 4 Host. */ - u32 host_id:2; -#else - u32 host_id:2; - u32 def_pri:3; - u32 rsvd4:3; - u32 nic_rx_mode:5; - u32 tso_en:1; - u32 fic_car_en:1; - /* ucode capture enable: 0-disable; 1-enable */ - u32 ucapture_en:1; - u32 ovs_func_en:1; - u32 acl_rx_en:1; - u32 acl_tx_en:1; - u32 mc_bc_limit_en:1; - u32 ethtype_filter_en:1; - u32 ipmac_filter_en:1; - u32 mac_filter_en:1; - u32 qos_rx_car_en:1; - u32 rsvd2:1; - u32 rsvd1:1; - u32 tso_local_coalesce:1; - u32 rxvlan_offload_en:1; - u32 rss_en:1; - u32 lli_en:1; - u32 learn_en:1; - u32 valid:1; -#endif - } bs; - - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 mtu:16; /* mtu value: [64-15500] */ - u32 rsvd1:1; - /* vlan mode: 0-all; 1-access; 2-trunk; - * 3-hybrid(unsupport); 4-qinq port; - */ - u32 vlan_mode:3; - u32 vlan_id:12; /* vlan id: [0~4095] */ -#else - u32 vlan_id:12; - u32 vlan_mode:3; - u32 rsvd1:1; - u32 mtu:16; -#endif - } bs; - - u32 value; - } dw1; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 lli_mode:1; /* lli mode */ - /* er forward trunk type: 0-ethernet type, 1-fic type */ - u32 er_fwd_trunk_type:1; - /* er forward trunk mode: - * 0-standby; 1-smac; 2-dmac; 3-smacdmac; 4-sip; 5-dip; - * 6-sipdip; 7-5tuples; 8-lacp - */ - u32 er_fwd_trunk_mode:4; - /* edge relay mode: 0-VEB; 1-VEPA(unsupport); - * 2-Multi-Channel(unsupport) - */ - u32 er_mode:2; - /* edge relay id: [0~15]. support up to 16 er. */ - u32 er_id:4; - /* er forward type: 2-port; 3-fic; - * 4-trunk; other-unsupport - */ - u32 er_fwd_type:4; - /* er forward id: - * fwd_type=2: forward ethernet port id - * fwd_type=3: forward fic id(tb+tp) - * fwd_type=4: forward trunk id - */ - u32 er_fwd_id:16; -#else - u32 er_fwd_id:16; - u32 er_fwd_type:4; - u32 er_id:4; - u32 er_mode:2; - u32 er_fwd_trunk_mode:4; - u32 er_fwd_trunk_type:1; - u32 lli_mode:1; -#endif - } bs; - - u32 value; - } dw2; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 pfc_en:1; - u32 rsvd1:7; - u32 ovs_invld_tcp_action:1; - u32 ovs_ip_frag_action:1; - u32 rsvd2:2; - u32 roce_en:1; - u32 iwarp_en:1; - u32 fcoe_en:1; - u32 toe_en:1; - u32 rsvd3:8; - u32 ethtype_group_id:8; -#else - u32 ethtype_group_id:8; - u32 rsvd3:8; - u32 toe_en:1; - u32 fcoe_en:1; - u32 iwarp_en:1; - u32 roce_en:1; - u32 rsvd2:2; - u32 ovs_ip_frag_action:1; - u32 ovs_invld_tcp_action:1; - u32 rsvd1:7; - u32 pfc_en:1; -#endif - } bs; - - u32 value; - } dw3; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:8; - u32 vni:24; -#else - u32 vni:24; - u32 rsvd1:8; -#endif - } bs; - - u32 value; - } dw4; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1; -#else - u32 rsvd1; -#endif - } bs; - - u32 value; - } dw5; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:8; - u32 rq_thd:13; - u32 host_car_id:11; /* host car id */ -#else - u32 host_car_id:11; - u32 rq_thd:13; - u32 rsvd1:8; -#endif - } bs; - - u32 value; - } dw6; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:5; - u32 fic_uc_car_id:11; /* fic unicast car id */ - u32 rsvd2:5; - u32 fic_mc_car_id:11; /* fic multicast car id */ -#else - u32 fic_mc_car_id:11; - u32 rsvd2:5; - u32 fic_uc_car_id:11; - u32 rsvd1:5; -#endif - } fic_bs; - - u32 value; - } dw7; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* safe group identifier valid: 0-invalid; 1-valid */ - u32 sg_id_valid:1; - u32 sg_id:10; /* safe group identifier */ - u32 rsvd9:1; - /* rq priority enable: 0-disable; 1-enable */ - u32 rq_pri_en:1; - /* rq priority num: 0-1pri; 1-2pri; 2-4pri; 3-8pri */ - u32 rq_pri_num:3; - /* one wqe buffer size, default is 2K bytes */ - u32 rx_wqe_buffer_size:16; -#else - u32 rx_wqe_buffer_size:16; - u32 rq_pri_num:3; - u32 rq_pri_en:1; - u32 rsvd9:1; - u32 sg_id:10; - u32 sg_id_valid:1; -#endif - } bs; - - u32 value; - } dw8; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* IPv4 LRO enable: 0-disable; 1-enable; */ - u32 lro_ipv4_en:1; - /* IPv6 LRO enable: 0-disable; 1-enable; */ - u32 lro_ipv6_en:1; - /* LRO pkt max wqe buffer number */ - u32 lro_max_wqe_num:6; - /* Each group occupies 3bits, - * 8 group share allocation 24bits, - * group 0 corresponds to the low 3bits - */ - u32 vlan_pri_map_group:24; -#else - u32 vlan_pri_map_group:24; - u32 lro_max_wqe_num:6; - u32 lro_ipv6_en:1; - u32 lro_ipv4_en:1; -#endif - } bs; - - u32 value; - } dw9; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rss_group_id:4; - u32 lli_frame_size:12; - u32 smac_h16:16; -#else - u32 smac_h16:16; - u32 lli_frame_size:12; - u32 rss_group_id:4; -#endif - } bs; - - u32 value; - } dw10; - - u32 smac_l32; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 oqid:16; - u32 vf_map_pf_id:4; - /*lro change; 0:changing 1:change done */ - u32 lro_change_flag:1; - u32 rsvd11:1; - u32 base_qid:10; -#else - u32 base_qid:10; - u32 rsvd11:1; - u32 lro_change_flag:1; - u32 vf_map_pf_id:4; - u32 oqid:16; -#endif - } bs; - - u32 value; - } dw12; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:2; - u32 cfg_rq_depth:6; - u32 cfg_q_num:6; - u32 fc_port_id:4; - u32 rsvd2:14; -#else - u32 rsvd2:14; - u32 fc_port_id:4; - u32 cfg_q_num:6; - u32 cfg_rq_depth:6; - u32 rsvd1:2; -#endif - } bs; - - u32 value; - } dw13; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1; -#else - u32 rsvd1; -#endif - } bs; - - u32 value; - - } dw14; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd3:2; - u32 bond3_hash_policy:3; - u32 bond3_mode:3; - u32 rsvd2:2; - u32 bond2_hash_policy:3; - u32 bond2_mode:3; - u32 rsvd1:2; - u32 bond1_hash_policy:3; - u32 bond1_mode:3; - u32 rsvd0:2; - u32 bond0_hash_policy:3; - u32 bond0_mode:3; -#else - u32 bond0_mode:3; - u32 bond0_hash_policy:3; - u32 rsvd0:2; - u32 bond1_mode:3; - u32 bond1_hash_policy:3; - u32 rsvd1:2; - u32 bond2_mode:3; - u32 bond2_hash_policy:3; - u32 rsvd2:2; - u32 bond3_mode:3; - u32 bond3_hash_policy:3; - u32 rsvd3:2; -#endif - } bs; - - u32 value; - - } dw15; -} sml_funcfg_tbl_s; - -/** - * Struct name: sml_portcfg_tbl_s - * @brief: Port Configuration Table - * Description: Port Configuration attribute table - */ -typedef struct tag_sml_portcfg_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 valid:1; /* valid:0-invalid; 1-valid */ - /* mac learn enable: 0-disable; 1-enable */ - u32 learn_en:1; - u32 trunk_en:1; /* trunk enable: 0-disable; 1-enable */ - /* broadcast suppression enable: 0-disable; 1-enable */ - u32 bc_sups_en:1; - /* unknown multicast suppression enable: - * 0-disable; 1-enable - */ - u32 un_mc_sups_en:1; - /* unknown unicast suppression enable: - * 0-disable; 1-enable - */ - u32 un_uc_sups_en:1; - u32 ovs_mirror_tx_en:1; - /* ovs port enable: 0-disable; 1-enable */ - u32 ovs_port_en:1; - u32 ovs_mirror_rx_en:1; - u32 qcn_en:1; /* qcn enable: 0-disable; 1-enable */ - /* ucode capture enable: 0-disable; 1-enable */ - u32 ucapture_en:1; - u32 ovs_invld_tcp_action:1; - u32 ovs_ip_frag_action:1; - u32 def_pri:3; /* default priority */ - u32 rsvd3:2; - /* edge relay mode: 0-VEB; 1-VEPA(unsupport); - * 2-Multi-Channel(unsupport) - */ - u32 er_mode:2; - /* edge relay identifier: [0~15]. support up to 16 er */ - u32 er_id:4; - u32 trunk_id:8; /* trunk identifier: [0~255] */ -#else - u32 trunk_id:8; - u32 er_id:4; - u32 er_mode:2; - u32 rsvd3:2; - u32 def_pri:3; - u32 ovs_ip_frag_action:1; - u32 ovs_invld_tcp_action:1; - u32 ucapture_en:1; - u32 qcn_en:1; - u32 ovs_mirror_rx_en:1; - u32 ovs_port_en:1; - u32 ovs_mirror_tx_en:1; - u32 un_uc_sups_en:1; - u32 un_mc_sups_en:1; - u32 bc_sups_en:1; - u32 trunk_en:1; - u32 learn_en:1; - u32 valid:1; -#endif - } bs; - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd2:2; - u32 mtu:14; - u32 rsvd3:1; - u32 vlan_mode:3; - u32 vlan_id:12; -#else - u32 vlan_id:12; - u32 vlan_mode:3; - u32 rsvd3:1; - u32 mtu:14; - u32 rsvd2:2; -#endif - } bs; - u32 value; - } dw1; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* q7_cos : ... : q0_cos = 4bits : ... : 4bits */ - u32 ovs_queue_cos; -#else - u32 ovs_queue_cos; -#endif - } bs; - u32 value; - } dw2; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:10; - u32 un_mc_car_id:11; - u32 un_uc_car_id:11; -#else - u32 un_uc_car_id:11; - u32 un_mc_car_id:11; - u32 rsvd1:10; -#endif - } bs; - u32 value; - } dw3; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd6:5; - u32 bc_car_id:11; - u32 pf_promiscuous_bitmap:16; -#else - u32 pf_promiscuous_bitmap:16; - u32 bc_car_id:11; - u32 rsvd6:5; -#endif - } bs; - u32 value; - } dw4; - - union { - struct { - u32 fc_map; - - } fcoe_bs; - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 start_queue:8; - u32 queue_size:8; - u32 mirror_func_id:16; -#else - u32 mirror_func_id:16; - u32 queue_size:8; - u32 start_queue:8; -#endif - } ovs_mirror_bs; - u32 value; - } dw5; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u16 vlan; - u16 dmac_h16; -#else - u16 dmac_h16; - u16 vlan; -#endif - } fcoe_bs; - u32 value; - } dw6; - - union { - struct { - u32 dmac_l32; - - } fcoe_bs; - u32 value; - } dw7; - -} sml_portcfg_tbl_s; - -/** - * Struct name: sml_taggedlist_tbl_s - * @brief: Tagged List Table - * Description: VLAN filtering Trunk/Hybrid type tagged list table - */ -typedef struct tag_sml_taggedlist_tbl { - u32 bitmap[TBL_ID_TAGGEDLIST_BITMAP32_NUM]; -} sml_taggedlist_tbl_s; - -/** - * Struct name: sml_untaggedlist_tbl_s - * @brief: Untagged List Table - * Description: VLAN filtering Hybrid type Untagged list table - */ -typedef struct tag_sml_untaggedlist_tbl { - u32 bitmap[TBL_ID_UNTAGGEDLIST_BITMAP32_NUM]; -} sml_untaggedlist_tbl_s; - -/** - * Struct name: sml_trunkfwd_tbl_s - * @brief: Trunk Forward Table - * Description: port aggregation Eth-Trunk forwarding table - */ -typedef struct tag_sml_trunkfwd_tbl { - u16 fwd_id[TBL_ID_TRUNKFWD_ENTRY_ELEM_NUM]; /* dw0-dw15 */ -} sml_trunkfwd_tbl_s; - -/** - * Struct name: sml_mac_tbl_head_u - * @brief: Mac table request/response head - * Description: MAC table, Hash API header - */ -typedef union tag_sml_mac_tbl_head { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 src:5; - u32 instance_id:6; - u32 opid:5; - u32 A:1; - u32 S:1; - u32 rsvd:14; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 rsvd:14; - u32 S:1; - u32 A:1; - u32 opid:5; - u32 instance_id:6; - u32 src:5; -#endif - } req_bs; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 code:2; - u32 subcode:2; - u32 node_index:28; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 node_index:28; - u32 subcode:2; - u32 code:2; -#endif - } rsp_bs; - - u32 value; -} sml_mac_tbl_head_u; - -/** - * Struct name: sml_mac_tbl_8_4_key_u - * @brief: Mac Table Key - * Description: MAC table key - */ -typedef union tag_sml_mac_tbl_8_4_key { - struct { - u32 val0; - u32 val1; - } value; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 er_id:4; - u32 vlan_id:12; - u32 mac_h16:16; - - u32 mac_m16:16; - u32 mac_l16:16; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 mac_h16:16; - u32 vlan_id:12; - u32 er_id:4; - - u32 mac_l16:16; - u32 mac_m16:16; -#endif - } bs; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 er_id:4; - u32 vlan_id:12; - u32 mac0:8; - u32 mac1:8; - - u32 mac2:8; - u32 mac3:8; - u32 mac4:8; - u32 mac5:8; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 mac1:8; - u32 mac0:8; - u32 vlan_id:12; - u32 er_id:4; - - u32 mac5:8; - u32 mac4:8; - u32 mac3:8; - u32 mac2:8; -#endif - } mac_bs; -} sml_mac_tbl_8_4_key_u; - -/** - * Struct name: sml_mac_tbl_8_4_item_u - * @brief: Mac Table Item - * Description: xxxxxxxxxxxxxxx - */ -typedef union tag_sml_mac_tbl_8_4_item { - u32 value; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd:10; - u32 host_id:2; - u32 fwd_type:4; - u32 fwd_id:16; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 fwd_id:16; - u32 fwd_type:4; - u32 host_id:2; - u32 rsvd:10; -#endif - } bs; -} sml_mac_tbl_8_4_item_u; - -/** - * Struct name: sml_mac_tbl_key_item_s - * @brief: Mac Table( 8 + 4 ) - * Description: MAC table Key + Item - */ -typedef struct tag_sml_mac_tbl_8_4 { - sml_mac_tbl_head_u head; - sml_mac_tbl_8_4_key_u key; - sml_mac_tbl_8_4_item_u item; -} sml_mac_tbl_8_4_s; - -/** - * Struct name: sml_vtep_tbl_8_20_key_s - * @brief: Vtep Table Key - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vtep_tbl_8_20_key { - u32 vtep_remote_ip; - u32 rsvd; -} sml_vtep_tbl_8_20_key_s; - -/** - * Struct name: dmac_smac_u - * @brief: Dmac & Smac for VxLAN encapsulation - * Description: xxxxxxxxxxxxxxx - */ -typedef union tag_dmac_smac { - u16 mac_addr[6]; - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u16 d_mac0:8; - u16 d_mac1:8; - u16 d_mac2:8; - u16 d_mac3:8; - - u16 d_mac4:8; - u16 d_mac5:8; - u16 s_mac0:8; - u16 s_mac1:8; - - u16 s_mac2:8; - u16 s_mac3:8; - u16 s_mac4:8; - u16 s_mac5:8; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u16 d_mac1:8; - u16 d_mac0:8; - u16 d_mac3:8; - u16 d_mac2:8; - - u16 d_mac5:8; - u16 d_mac4:8; - u16 s_mac1:8; - u16 s_mac0:8; - - u16 s_mac3:8; - u16 s_mac2:8; - u16 s_mac5:8; - u16 s_mac4:8; -#endif - } bs; -} dmac_smac_u; - -/** - * Struct name: sml_vtep_tbl_8_20_item_u - * @brief: Vtep Table Item - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vtep_tbl_8_20_item { - dmac_smac_u dmac_smac; - u32 source_ip; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 er_id:4; - u32 rsvd:12; - u32 vlan:16; /* The PRI*/ -#else - u32 vlan:16; /* The PRI*/ - u32 rsvd:12; - u32 er_id:4; -#endif - } bs; - - u32 value; - } misc; -} sml_vtep_tbl_8_20_item_s; - -/** - * Struct name: sml_vtep_tbl_8_20_s - * @brief: Vtep Table( 8 + 20) - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vtep_tbl_8_20 { - sml_mac_tbl_head_u head; /*first 4 bytes , the same as mac tbl */ - sml_vtep_tbl_8_20_key_s key; - sml_vtep_tbl_8_20_item_s item; -} sml_vtep_tbl_8_20_s; - -/** - * Struct name: sml_vtep_tbl_8_20_key_s - * @brief: Vtep Table Key - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vxlan_udp_portcfg_4_8_key { - u32 udp_dest_port; - u32 rsvd; -} sml_vxlan_udp_portcfg_4_8_key_s; - -/** - * Struct name: sml_vtep_tbl_8_20_item_u - * @brief: Vtep Table Item - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vxlan_udp_portcfg_4_8_item { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 odp_port:12; - u32 dp_id:2; - u32 resvd:20; -#else - u32 resvd:20; - u32 dp_id:2; - u32 odp_port:12; -#endif - } bs; - - u32 value; - } dw0; -} sml_vxlan_udp_portcfg_4_8_item_s; - -/** - * Struct name: sml_vxlan_udp_portcfg_4_8_s - * @brief: Vxlan Dest Udp Port Table( 8 + 20) - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vxlan_udp_portcfg_4_8 { - sml_mac_tbl_head_u head; /*first 4 bytes , the same as mac tbl */ - sml_vxlan_udp_portcfg_4_8_key_s key; - sml_vxlan_udp_portcfg_4_8_item_s item; -} sml_vxlan_udp_portcfg_4_8_s; - -/** - * Struct name: sml_vtep_er_info_s - * @brief: Vtep Er Info Table - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_vtep_er_info { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 lli_mode:1; - /* ER bound to the outbound port is Eth-Trunk, - * type (FIC/Port) - */ - u32 er_fwd_trunk_type:1; - /* ER bound to the outbound port is Eth-Trunk, - * port aggregation mode (Standby/LoadBalance/LACP) - */ - u32 er_fwd_trunk_mode:4; - u32 er_mode:2; /* ER mode (VEB/VEPA)*/ - /* er_id as LT index but also used as entries, - * facilitating service - */ - u32 er_id:4; - /* Type of the ER bound to the outbound port - * (Port/FIC/Eth-Trunk) - */ - u32 er_fwd_type:4; - /* ER bound egress ID(PortID/FICID/TrunkID)*/ - u32 er_fwd_id:16; -#else - u32 er_fwd_id:16; - u32 er_fwd_type:4; - u32 er_id:4; - u32 er_mode:2; - u32 er_fwd_trunk_mode:4; - u32 er_fwd_trunk_type:1; - u32 lli_mode:1; -#endif - } bs; - - u32 value; - } dw0; -} sml_vtep_er_info_s; - -/** - * Struct name: sml_logic_port_cfg_tbl_s - * @brief: Logic Port Cfg Table - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sm_logic_port_cfg { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* Input switch port (or DP_MAX_PORTS). */ - u32 odp_port:12; - u32 dp_id:2; /* datapath id */ - u32 er_id:4; - /* logic port MAC Learning enable or disable */ - u32 learn_en:1; - u32 resvd:13; -#else - u32 resvd:13; - /* logic port MAC Learning enable or disable */ - u32 learn_en:1; - u32 er_id:4; - u32 dp_id:2; /* datapath id */ - /* Input switch port (or DP_MAX_PORTS). */ - u32 odp_port:12; -#endif - } bs; - - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd4:1; - u32 er_fwd_trunk_type:1; - u32 er_fwd_trunk_mode:4; - u32 er_mode:2; - u32 er_id:4; - u32 er_fwd_type:4; - u32 er_fwd_id:16; -#else - u32 er_fwd_id:16; - u32 er_fwd_type:4; - u32 er_id:4; - u32 er_mode:2; - u32 er_fwd_trunk_mode:4; - u32 er_fwd_trunk_type:1; - u32 rsvd4:1; -#endif - } bs; - - u32 value; - } dw1; -} sml_logic_port_cfg_tbl_s; - -/* vport stats counter */ -typedef struct tag_vport_stats_ctr { - u16 rx_packets; /* total packets received */ - u16 tx_packets; /* total packets transmitted */ - u16 rx_bytes; /* total bytes received */ - u16 tx_bytes; /* total bytes transmitted */ - u16 rx_errors; /* bad packets received */ - u16 tx_errors; /* packet transmit problems */ - u16 rx_dropped; /* no space in linux buffers */ - u16 tx_dropped; /* no space available in linux */ -} vport_stats_ctr_s; - -/** - * Struct name: vport_s - * @brief: Datapath Cfg Table - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_vport { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* dw0 */ - u32 valid:1; - u32 learn_en:1; - u32 type:4; - u32 dp_id:2; - /* The type of Vport mapping port, 0:VF, 1:Logic Port */ - u32 mapping_type:4; - u32 mapping_port:12; /* odp_port mapping on VF or ER Logic Port */ - u32 rsvd:8; - - /* dw1 */ - u32 srctagl:12; /* the function used by parent context */ - /* parent context XID used to upcall missed packet to ovs-vswitchd */ - u32 xid:20; - - /* dw2 */ - u32 odp_port:12; /* on datapath port id */ - /* parent context CID used to upcall missed packet to ovs-vswitchd */ - u32 cid:20; -#else - /* dw0 */ - u32 rsvd:8; - u32 mapping_port:12; /* odp_port mapping on VF or ER Logic Port */ - /* The type of Vport mapping port, 0:VF, 1:Logic Port */ - u32 mapping_type:4; - u32 dp_id:2; - u32 type:4; - u32 learn_en:1; - u32 valid:1; - - /* dw1 */ - /* parent context XID used to upcall missed packet to ovs-vswitchd */ - u32 xid:20; - u32 srctagl:12; /* the function used by parent context */ - - /* dw2 */ - /* parent context CID used to upcall missed packet to ovs-vswitchd */ - u32 cid:20; - u32 odp_port:12; /* on datapath port id */ -#endif - - /* dw3 is er information and it is valid only - * when mapping_type=1(logic port) - */ - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 lli_mode:1; - /* ER bound to the outbound port is Eth-Trunk, - * type (FIC/Port) - */ - u32 er_fwd_trunk_type:1; - /* ER bound to the outbound port is Eth-Trunk, - * port aggregation mode (Standby/LoadBalance/LACP) - */ - u32 er_fwd_trunk_mode:4; - u32 er_mode:2; /* ER mode (VEB/VEPA)*/ - u32 er_id:4; /* ERID */ - /* Type of the ER bound to the outbound port - * (Port/FIC/Eth-Trunk) - */ - u32 er_fwd_type:4; - /*ER bound egress ID(PortID/FICID/TrunkID)*/ - u32 er_fwd_id:16; -#else - u32 er_fwd_id:16; - u32 er_fwd_type:4; - u32 er_id:4; - u32 er_mode:2; - u32 er_fwd_trunk_mode:4; - /* ER bound to the outbound port is Eth-Trunk, - * type (FIC/Port) - */ - u32 er_fwd_trunk_type:1; - u32 lli_mode:1; -#endif - } bs; - u32 value; - } dw3; - - /* dw4~dw7 */ - vport_stats_ctr_s stats; /* vport stats counters */ - -} vport_s; - -/** - * Struct name: sml_elb_tbl_elem_u - * @brief: ELB Table Elem - * Description: ELB leaf table members - */ -typedef union tag_sml_elb_tbl_elem { - struct { - u32 fwd_val; - u32 next_val; - } value; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd0:12; - u32 fwd_type:4; - u32 fwd_id:16; - - u32 rsvd1:17; - u32 elb_index_next:15; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 fwd_id:16; - u32 fwd_type:4; - u32 rsvd0:12; - - u32 elb_index_next:15; - u32 rsvd1:17; -#endif - } bs; -} sml_elb_tbl_elem_u; - -/** - * Struct name: sml_elb_tbl_s - * @brief ELB Table - * Description: ELB leaf table Entry - */ -typedef struct tag_sml_elb_tbl { - sml_elb_tbl_elem_u elem[TBL_ID_ELB_ENTRY_ELEM_NUM]; -} sml_elb_tbl_s; - -/** - * Struct name: sml_vlan_tbl_elem_u - * @brief: VLAN Table Elem - * Description: VLAN broadcast table members - */ -typedef union tag_sml_vlan_tbl_elem { - u16 value; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u16 learn_en:1; - u16 elb_index:15; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u16 elb_index:15; - u16 learn_en:1; -#endif - } bs; -} sml_vlan_tbl_elem_u; - -/** - * Struct name: sml_vlan_tbl_s - * @brief: VLAN Table - * Entry Description: VLAN broadcast table - */ -typedef struct tag_sml_vlan_tbl { - sml_vlan_tbl_elem_u elem[TBL_ID_VLAN_ENTRY_ELEM_NUM]; -} sml_vlan_tbl_s; - -/** - * Struct name: sml_multicast_tbl_array_u - * @brief: Multicast Table Elem - * Description: multicast table members - */ -typedef union tag_sml_multicast_tbl_elem { - struct { - u32 route_val; - u32 next_val; - } value; - - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd0:12; - u32 route_fwd_type:4; - u32 route_fwd_id:16; - - u32 rsvd1:17; - u32 elb_index:15; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 route_fwd_id:16; - u32 route_fwd_type:4; - u32 rsvd0:12; - - u32 elb_index:15; - u32 rsvd1:17; -#endif - } bs; -} sml_multicast_tbl_elem_u; - -/* Struct name: sml_multicast_tbl_s - * @brief: Multicast Table - * Entry Description: multicast table - */ -typedef struct tag_sml_multicast_tbl { - sml_multicast_tbl_elem_u elem[TBL_ID_MULTICAST_ENTRY_ELEM_NUM]; -} sml_multicast_tbl_s; - -/* Struct name: sml_observe_port_s - * @brief: Observe Port Table - * Description: observing port entries defined - */ -typedef struct tag_sml_observe_port { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 valid:1; - u32 rsvd0:11; - u32 dst_type:4; - u32 dst_id:16; -#else - u32 dst_id:16; - u32 dst_type:4; - u32 rsvd0:11; - u32 valid:1; -#endif - } bs; - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:4; - u32 vlan_id:12; - u32 rsvd2:2; - u32 cut_len:14; -#else - u32 cut_len:14; - u32 rsvd2:2; - u32 vlan_id:12; - u32 rsvd1:4; -#endif - } bs; - u32 value; - } dw1; - - u32 rsvd_pad[2]; -} sml_observe_port_s; - -/* Struct name: sml_ipmac_tbl_16_12_key_s - * @brief ipmac filter table key - * Description: ipmac filter key define - */ -typedef struct tag_sml_ipmac_tbl_16_12_key { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 func_id:16; - u32 mac_h16:16; -#else - u32 mac_h16:16; - u32 func_id:16; -#endif - -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 mac_m16:16; - u32 mac_l16:16; -#else - u32 mac_l16:16; - u32 mac_m16:16; -#endif - - u32 ip; - u32 rsvd; -} sml_ipmac_tbl_16_12_key_s; - -/* Struct name: sml_ipmac_tbl_16_12_item_s - * @brief ipmac filter table item - * Description: ipmac filter item define - */ -typedef struct tag_sml_ipmac_tbl_16_12_item { - u32 rsvd[3]; -} sml_ipmac_tbl_16_12_item_s; - -/* Struct name: sml_ethtype_tbl_8_4_key_s - * @brief: ethtype filter table key - * Description: ethtype filter key define - */ -typedef struct tag_sml_ethtype_tbl_8_4_key { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 group_id:16; - u32 ethtype:16; -#else - u32 ethtype:16; - u32 group_id:16; -#endif - - u32 rsvd; -} sml_ethtype_tbl_8_4_key_s; - -/* Struct name: sml_ethtype_tbl_8_4_item_s - * @brief ethtype filter table item - * Description: ethtype filter item define - */ -typedef struct tag_sml_ethtype_tbl_8_4_item { - u32 rsvd; -} sml_ethtype_tbl_8_4_item_s; - -/* ACL to dfx record packets*/ -typedef enum { - ACL_PKT_TX = 0, - ACL_PKT_RX = 1, -} sml_acl_pkt_dir_e; - -/* ACL policy table item*/ -typedef struct tag_sml_acl_policy_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 drop:1; - u32 car_en:1; - u32 car_id:12; - u32 counter_type:2; - u32 counter_id:16; -#else - u32 counter_id:16; - u32 counter_type:2; - u32 car_id:12; - u32 car_en:1; - u32 drop:1; -#endif - } bs; - - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd1:7; - u32 mirrior_en:1; - u32 observer_port:10; - u32 change_dscp:1; - u32 new_dscp:6; - u32 change_pkt_pri:1; - u32 new_pkt_pri:3; - u32 redirect_en:3; -#else - u32 redirect_en:3; - u32 new_pkt_pri:3; - u32 change_pkt_pri:1; - u32 new_dscp:6; - u32 change_dscp:1; - u32 observer_port:10; - u32 mirrior_en:1; - u32 rsvd1:7; -#endif - } bs; - - u32 value; - } dw1; - - u32 redirect_data; - u32 rsvd2; -} sml_acl_policy_tbl_s; - -typedef struct tag_sml_acl_ipv4_key { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* The alignment, match_key_type and - * later field is a KEY value - */ - u32 padding:16; - u32 tid0:2; - u32 match_key_type:3; /* Matching type*/ - u32 rsvd:11; /* Reserved field*/ -#else - u32 rsvd:11; - u32 match_key_type:3; - u32 tid0:2; - u32 padding:16; -#endif - } bs; - u32 value; - } dw0; - - /* dw1&dw2 */ - u32 sipv4; - u32 dipv4; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 l4_sport:16; - u32 l4_dport:16; -#else - u32 l4_dport:16; - u32 l4_sport:16; -#endif - } bs; - u32 value; - } dw3; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 l4_protocol:8; - u32 rsvd0:8; - u32 seg_id:10; - u32 rsvd1:6; -#else - u32 rsvd1:6; - u32 seg_id:10; - u32 rsvd0:8; - u32 l4_protocol:8; -#endif - } bs; - u32 value; - } dw4; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 tid1:2; - u32 rsvd:14; - u32 padding:16; -#else - u32 padding:16; - u32 rsvd:14; - u32 tid1:2; -#endif - } bs; - u32 value; - } dw5; -} sml_acl_ipv4_key_s; - -typedef struct tag_sml_acl_ipv6_key { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* The alignment, match_key_type and - * later field is a KEY value - */ - u32 padding:16; - u32 tid0:2; - u32 match_key_type:3; /* Matching type*/ - u32 rsvd:11; /* Reserved field*/ -#else - u32 rsvd:11; - u32 match_key_type:3; - u32 tid0:2; - u32 padding:16; -#endif - } bs; - u32 value; - } dw0; - - /*dw1~dw4 */ - u32 sipv6[4]; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 tid1:2; - u32 rsvd1:14; - u32 tid2:2; - u32 rsvd2:14; -#else - u32 rsvd2:14; - u32 tid2:2; - u32 rsvd1:14; - u32 tid1:2; -#endif - } bs; - u32 value; - } dw5; - - /*dw6~dw9 */ - u32 dipv6[4]; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 tid3:2; - u32 rsvd3:14; - u32 tid4:2; - u32 rsvd4:14; -#else - u32 rsvd4:14; - u32 tid4:2; - u32 rsvd3:14; - u32 tid3:2; -#endif - } bs; - u32 value; - } dw10; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 l4_sport:16; - u32 l4_dport:16; -#else - u32 l4_dport:16; - u32 l4_sport:16; -#endif - } bs; - u32 value; - } dw11; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 l4_protocol:8; - u32 rsvd0:8; - u32 seg_id:10; - u32 rsvd1:6; -#else - u32 rsvd1:6; - u32 seg_id:10; - u32 rsvd0:8; - u32 l4_protocol:8; -#endif - } bs; - u32 value; - } dw12; - - u32 dw13; - u32 dw14; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 tid5:2; - u32 rsvd5:14; - u32 tid6:2; - u32 rsvd6:14; -#else - u32 rsvd6:14; - u32 tid6:2; - u32 rsvd5:14; - u32 tid5:2; -#endif - } bs; - u32 value; - } dw15; - - u32 dw16; - u32 dw17; - u32 dw18; - u32 dw19; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 tid7:2; - u32 rsvd7:30; -#else - u32 rsvd7:30; - u32 tid7:2; -#endif - } bs; - u32 value; - } dw20; -} sml_acl_ipv6_key_s; - -/** - * Struct name: sml_voq_map_table_s - * @brief: voq_map_table - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_voq_map_table { - u16 voq_base[8]; -} sml_voq_map_table_s; - -/** - * Struct name: sml_rss_context_u - * @brief: rss_context - * Description: xxxxxxxxxxxxxxx - */ -typedef union tag_sml_rss_context { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 udp_ipv4:1; - u32 udp_ipv6:1; - u32 ipv4:1; - u32 tcp_ipv4:1; - u32 ipv6:1; - u32 tcp_ipv6:1; - u32 ipv6_ext:1; - u32 tcp_ipv6_ext:1; - u32 valid:1; - u32 rsvd1:13; - u32 def_qpn:10; -#else - u32 def_qpn:10; - u32 rsvd1:13; - u32 valid:1; - u32 tcp_ipv6_ext:1; - u32 ipv6_ext:1; - u32 tcp_ipv6:1; - u32 ipv6:1; - u32 tcp_ipv4:1; - u32 ipv4:1; - u32 udp_ipv6:1; - u32 udp_ipv4:1; -#endif - } bs; - - u32 value; -} sml_rss_context_u; - -typedef struct tag_sml_rss_context_tbl { - sml_rss_context_u element[TBL_ID_RSS_CONTEXT_NUM]; -} sml_rss_context_tbl_s; - -/** - * Struct name: sml_rss_hash_u - * @brief: rss_hash - * Description: xxxxxxxxxxxxxxx - */ -typedef union tag_sml_rss_hash { - u8 rq_index[256]; -} sml_rss_hash_u; - -typedef struct tag_sml_rss_hash_tbl { - sml_rss_hash_u element[TBL_ID_RSS_HASH_NUM]; -} sml_rss_hash_tbl_s; - -/** - * Struct name: sml_lli_5tuple_key_s - * @brief: lli_5tuple_key - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_lli_5tuple_key { - union { - struct { -/** Define the struct bits */ -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 src:5; - /* The tile need fill the Dest */ - u32 rt:1; - u32 key_size:2; - /* determines which action that engine will take */ - u32 profile_id:3; - /* indicates that requestor expect - * to receive a response data - */ - u32 op_id:5; - u32 a:1; - u32 rsvd:12; - u32 vld:1; - u32 xy:1; - u32 at:1; -#else - u32 at:1; - u32 xy:1; - u32 vld:1; - /* indicates that requestor expect to - * receive a response data - */ - u32 rsvd:12; - /* determines which action that engine will take*/ - u32 a:1; - u32 op_id:5; - u32 profile_id:3; - u32 key_size:2; - u32 rt:1; - u32 src:5; -#endif - } bs; - -/* Define an unsigned member */ - u32 value; - } dw0; - union { - struct { - u32 rsvd:1; - /* The tile need fill the Dest */ - u32 address:15; - - u32 table_type:5; - u32 ip_type:1; - u32 func_id:10; - } bs; - - u32 value; - } misc; - - u32 src_ip[4]; - u32 dst_ip[4]; - - u16 src_port; - u16 dst_port; - - u8 protocol; - u8 tcp_flag; - u8 fcoe_rctl; - u8 fcoe_type; - u16 eth_type; -} sml_lli_5tuple_key_s; - -/** - * Struct name: sml_lli_5tuple_rsp_s - * @brief: lli_5tuple_rsp - * Description: xxxxxxxxxxxxxxx - */ -typedef struct tag_sml_lli_5tuple_rsp { - union { - struct { - u32 state:4; - u32 rsvd:28; - } bs; - - u32 value; - } dw0; - - u32 dw1; - - union { - struct { - u32 frame_size:16; - u32 lli_en:8; - u32 rsvd:8; - } bs; - - u32 value; - } dw2; - - u32 dw3; -} sml_lli_5tuple_rsp_s; - -/** - * Struct name: l2nic_rx_cqe_s. - * @brief: l2nic_rx_cqe_s data structure. - * Description: - */ -typedef struct tag_l2nic_rx_cqe { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rx_done:1; - u32 bp_en:1; - u32 rsvd1:6; - u32 lro_num:8; - u32 checksum_err:16; -#else - u32 checksum_err:16; - u32 lro_num:8; - u32 rsvd1:6; - u32 bp_en:1; - u32 rx_done:1; -#endif - } bs; - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 length:16; - u32 vlan:16; -#else - u32 vlan:16; - u32 length:16; -#endif - } bs; - u32 value; - } dw1; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rss_type:8; - u32 rsvd0:2; - u32 vlan_offload_en:1; - u32 umbcast:2; - u32 rsvd1:7; - u32 pkt_types:12; -#else - u32 pkt_types:12; - u32 rsvd1:7; - u32 umbcast:2; - u32 vlan_offload_en:1; - u32 rsvd0:2; - u32 rss_type:8; -#endif - } bs; - u32 value; - } dw2; - - union { - struct { - u32 rss_hash_value; - } bs; - u32 value; - } dw3; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 if_1588:1; - u32 if_tx_ts:1; - u32 if_rx_ts:1; - u32 rsvd:1; - u32 msg_1588_type:4; - u32 msg_1588_offset:8; - u32 tx_ts_seq:16; -#else - u32 tx_ts_seq:16; - u32 msg_1588_offset:8; - u32 msg_1588_type:4; - u32 rsvd:1; - u32 if_rx_ts:1; - u32 if_tx_ts:1; - u32 if_1588:1; -#endif - } bs; - u32 value; - } dw4; - - union { - struct { - u32 msg_1588_ts; - } bs; - - struct { - u32 rsvd0:12; - /* for ovs. traffic type: 0-default l2nic pkt, - * 1-fallback traffic, 2-miss upcall traffic, - * 2-command - */ - u32 traffic_type:4; - /* for ovs. traffic from: vf_id, - * only support traffic_type=0(default l2nic) - * or 2(miss upcall) - */ - u32 traffic_from:16; - } ovs_bs; - - u32 value; - } dw5; - - union { - struct { - u32 lro_ts; - } bs; - u32 value; - } dw6; - - union { - struct { - u32 rsvd0; - } bs; - - u32 localtag; /* for ovs */ - - u32 value; - } dw7; -} l2nic_rx_cqe_s; - -typedef union tag_sml_global_queue_tbl_elem { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 src_tag_l:16; - u32 local_qid:8; - u32 rsvd:8; -#elif (__BYTE_ORDER__ == __LITTLE_ENDIAN__) - u32 rsvd:8; - u32 local_qid:8; - u32 src_tag_l:16; -#endif - } bs; - - u32 value; -} sml_global_queue_tbl_elem_u; - -typedef struct tag_sml_global_queue_tbl { - sml_global_queue_tbl_elem_u element[TBL_ID_GLOBAL_QUEUE_NUM]; -} sml_global_queue_tbl_s; - -typedef struct tag_sml_dfx_log_tbl { - u32 wr_init_pc_h32; /* Initial value of write_pc*/ - u32 wr_init_pc_l32; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 state:8; - u32 func_en:1; - u32 srctag:12; - u32 max_num:11; /* Data block highest value*/ -#else - u32 max_num:11; - u32 srctag:12; - u32 func_en:1; - u32 state:8; -#endif - } bs; - u32 value; - } dw2; - - u32 ci_index; -} sml_dfx_log_tbl_s; - -typedef struct tag_sml_glb_capture_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 valid:1; - u32 max_num:15; - u32 rsvd:16; -#else - u32 rsvd:16; - u32 max_num:15; - u32 valid:1; -#endif - } bs; - u32 value; - } dw0; - - u32 discard_addr_h32; - u32 discard_addr_l32; - - u32 rsvd0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 valid:1; - u32 mode:5; - u32 direct:2; - u32 offset:8; - u32 cos:3; - u32 max_num:13; -#else - u32 max_num:13; - u32 cos:3; - u32 offset:8; - u32 direct:2; - u32 mode:5; - u32 valid:1; -#endif - } bs; - u32 value; - } dw4; - - u32 data_vlan; - - u32 condition_addr_h32; - u32 condition_addr_l32; - -} sml_glb_capture_tbl_s; - -typedef struct tag_sml_cqe_addr_tbl { - u32 cqe_first_addr_h32; - u32 cqe_first_addr_l32; - u32 cqe_last_addr_h32; - u32 cqe_last_addr_l32; - -} sml_cqe_addr_tbl_s; - -/** - * Struct name: sml_ucode_exec_info_tbl_s - * @brief: ucode execption info Table - * Description: microcode exception information table - */ -typedef struct tag_ucode_exec_info_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 wptr_cpb_ack_str:4; - u32 mem_cpb_ack_cnums_dma:4; - u32 mem_cpb_ack_cmd_mode:2; - u32 pr_ret_vld:1; - u32 oeid_pd_pkt:1; - u32 rptr_cmd:4; - u32 wptr_cmd:4; - u32 src_tag_l:12; -#else - u32 src_tag_l:12; - u32 wptr_cmd:4; - u32 rptr_cmd:4; - u32 oeid_pd_pkt:1; - u32 pr_ret_vld:1; - u32 mem_cpb_ack_cmd_mode:2; - u32 mem_cpb_ack_cnums_dma:4; - u32 wptr_cpb_ack_str:4; -#endif - } bs; - - u32 value; - } dw0; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 fq:16; - u32 exception_type:4; - u32 rptr_cpb_ack_str:4; - u32 header_oeid:8; -#else - u32 header_oeid:8; - u32 rptr_cpb_ack_str:4; - u32 exception_type:4; - u32 fq:16; -#endif - } bs; - - u32 value; - } dw1; - - u32 oeid_pd_data_l32; - u32 oeid_pd_data_m32; -} sml_ucode_exec_info_s; - -typedef struct rq_iq_mapping_tbl { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rqid:16; - u32 iqid:8; - u32 rsvd:8; -#else - u32 rsvd:8; - u32 iqid:8; - u32 rqid:16; -#endif - } bs; - u32 value; - } dw[4]; -} sml_rq_iq_mapping_tbl_s; - -/* nic_ucode_rq_ctx table define - */ -typedef struct nic_ucode_rq_ctx { - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 max_count:10; - u32 cqe_tmpl:6; - u32 pkt_tmpl:6; - u32 wqe_tmpl:6; - u32 psge_valid:1; - u32 rsvd1:1; - u32 owner:1; - u32 ceq_en:1; -#else - u32 ceq_en:1; - u32 owner:1; - u32 rsvd1:1; - u32 psge_valid:1; - u32 wqe_tmpl:6; - u32 pkt_tmpl:6; - u32 cqe_tmpl:6; - u32 max_count:10; -#endif - } bs; - u32 dw0; - }; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* Interrupt number that L2NIC engine tell SW - * if generate int instead of CEQ - */ - u32 int_num:10; - u32 ceq_count:10; - /* product index */ - u32 pi:12; -#else - /* product index */ - u32 pi:12; - u32 ceq_count:10; - /* Interrupt number that L2NIC engine tell SW - * if generate int instead of CEQ - */ - u32 int_num:10; -#endif - } bs0; - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* CEQ arm, L2NIC engine will clear it after send ceq, - * driver should set it by CMD Q after receive all pkt. - */ - u32 ceq_arm:1; - u32 eq_id:5; - u32 rsvd2:4; - u32 ceq_count:10; - /* product index */ - u32 pi:12; -#else - /* product index */ - u32 pi:12; - u32 ceq_count:10; - u32 rsvd2:4; - u32 eq_id:5; - /* CEQ arm, L2NIC engine will clear it after send ceq, - * driver should set it by CMD Q after receive all pkt. - */ - u32 ceq_arm:1; -#endif - } bs1; - u32 dw1; - }; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - /* consumer index */ - u32 ci:12; - /* WQE page address of current CI point to, high part */ - u32 ci_wqe_page_addr_hi:20; -#else - /* WQE page address of current CI point to, high part */ - u32 ci_wqe_page_addr_hi:20; - /* consumer index */ - u32 ci:12; -#endif - } bs2; - u32 dw2; - }; - - /* WQE page address of current CI point to, low part */ - u32 ci_wqe_page_addr_lo; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 prefetch_min:7; - u32 prefetch_max:11; - u32 prefetch_cache_threshold:14; -#else - u32 prefetch_cache_threshold:14; - u32 prefetch_max:11; - u32 prefetch_min:7; -#endif - } bs3; - u32 dw3; - }; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd3:31; - /* ownership of WQE */ - u32 prefetch_owner:1; -#else - /* ownership of WQE */ - u32 prefetch_owner:1; - u32 rsvd3:31; -#endif - } bs4; - u32 dw4; - }; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 prefetch_ci:12; - /* high part */ - u32 prefetch_ci_wqe_page_addr_hi:20; -#else - /* high part */ - u32 prefetch_ci_wqe_page_addr_hi:20; - u32 prefetch_ci:12; -#endif - } bs5; - u32 dw5; - }; - - /* low part */ - u32 prefetch_ci_wqe_page_addr_lo; - /* host mem GPA, high part */ - u32 pi_gpa_hi; - /* host mem GPA, low part */ - u32 pi_gpa_lo; - - union { - struct { -#if (__BYTE_ORDER__ == __BIG_ENDIAN__) - u32 rsvd4:9; - u32 ci_cla_tbl_addr_hi:23; -#else - u32 ci_cla_tbl_addr_hi:23; - u32 rsvd4:9; -#endif - } bs6; - u32 dw6; - }; - - u32 ci_cla_tbl_addr_lo; - -} nic_ucode_rq_ctx_s; - -#define LRO_TSO_SPACE_SIZE (240) /* (15 * 16) */ -#define RQ_CTX_SIZE (48) - -#ifdef __cplusplus -#if __cplusplus -} -#endif -#endif /* __cplusplus */ -#endif /* __L2_TABLE_H__ */ diff --git a/drivers/net/ethernet/huawei/hinic/hinic_sml_table_pub.h b/drivers/net/ethernet/huawei/hinic/hinic_sml_table_pub.h deleted file mode 100644 index 39d0516c..00000000 --- a/drivers/net/ethernet/huawei/hinic/hinic_sml_table_pub.h +++ /dev/null @@ -1,277 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0*/ -/* Huawei HiNIC PCI Express Linux driver - * Copyright(c) 2017 Huawei Technologies Co., Ltd - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - */ - -#ifndef __SML_TABLE_PUB_H__ -#define __SML_TABLE_PUB_H__ - -#ifdef __cplusplus -#if __cplusplus -extern "C" { -#endif -#endif /* __cplusplus */ - -/* Un-FPGA(ESL/EMU/EDA) specification */ -#if (!defined(__UP_FPGA__) && (!defined(HI1822_MODE_FPGA))) -/* ER specification*/ -#define L2_ER_SPEC (16) - -/* Entry specification*/ -#define TBL_ID_FUNC_CFG_SPEC (512) -#define TBL_ID_PORT_CFG_SPEC (16) -#define TBL_ID_MAC_SPEC (4096) -#define TBL_ID_MULTICAST_SPEC (1024) -#define TBL_ID_TRUNK_SPEC (256) -#define TBL_ID_ELB_SPEC (18432) -#define TBL_ID_TAGGEDLIST_SPEC (80) -#define TBL_ID_UNTAGGEDLIST_SPEC (16) - -/* VLAN specification*/ -#define VSW_VLAN_SPEC (4096) - -#else /* FPGA scenario specifications */ - -/* ER specification*/ -#define L2_ER_SPEC (4) - -/* Entry specification*/ -#define TBL_ID_FUNC_CFG_SPEC (64) -#define TBL_ID_PORT_CFG_SPEC (16) -#define TBL_ID_MAC_SPEC (256) -#define TBL_ID_MULTICAST_SPEC (32) -#define TBL_ID_TRUNK_SPEC (16) -#define TBL_ID_ELB_SPEC (1152) -#define TBL_ID_TAGGEDLIST_SPEC (20) -#define TBL_ID_UNTAGGEDLIST_SPEC (4) - -/* VLAN specification*/ -#define VSW_VLAN_SPEC (1024) -#endif - -/** - * Number of entries elements defined - */ -#define TBL_ID_ELB_ENTRY_ELEM_NUM 2 -#define TBL_ID_VLAN_ENTRY_ELEM_NUM 8 -#define TBL_ID_MULTICAST_ENTRY_ELEM_NUM 2 -#define TBL_ID_TRUNKFWD_ENTRY_ELEM_NUM 32 -#define TBL_ID_TAGGEDLIST_BITMAP32_NUM 4 -#define TBL_ID_UNTAGGEDLIST_BITMAP32_NUM 4 -#define TBL_ID_GLOBAL_QUEUE_NUM 4 -#define TBL_ID_RSS_CONTEXT_NUM 4 -#define TBL_ID_RSS_HASH_NUM 4 - -/** - * NIC receiving mode defined - */ -#define NIC_RX_MODE_UC 0x01 /* 0b00001 */ -#define NIC_RX_MODE_MC 0x02 /* 0b00010 */ -#define NIC_RX_MODE_BC 0x04 /* 0b00100 */ -#define NIC_RX_MODE_MC_ALL 0x08 /* 0b01000 */ -#define NIC_RX_MODE_PROMISC 0x10 /* 0b10000 */ - -/** - * Maximum number of HCAR - */ -#define QOS_MAX_HCAR_NUM (12) - -/** - * VLAN Table, Multicast Table, ELB Table Definitions - * The Table index and sub id index - */ -#define VSW_DEFAULT_VLAN0 (0) -#define INVALID_ELB_INDEX (0) - -#if (!defined(__UP_FPGA__) && (!defined(HI1822_MODE_FPGA))) -/* Supports ESL/EMU/EDA 16ER * 4K VLAN, 1 entry stored 8 vlan*/ -#define GET_VLAN_TABLE_INDEX(er_id, vlan_id) \ - ((((er_id) & 0xF) << 9) | (((vlan_id) & 0xFFF) >> 3)) -#else -/*FPGA supports only 4ER * 1K VLAN, 1 entry stored 8 vlan*/ -#define GET_VLAN_TABLE_INDEX(er_id, vlan_id) \ - ((((er_id) & 0x3) << 7) | (((vlan_id) & 0x3FF) >> 3)) -#endif -#define GET_VLAN_ENTRY_SUBID(vlan_id) ((vlan_id) & 0x7) - -#define GET_MULTICAST_TABLE_INDEX(mc_id) ((mc_id) >> 1) -#define GET_MULTICAST_ENTRY_SUBID(mc_id) ((mc_id) & 0x1) - -#define GET_ELB_TABLE_INDEX(elb_id) ((elb_id) >> 1) -#define GET_ELB_ENTRY_SUBID(elb_id) ((elb_id) & 0x1) - -/** - * taggedlist_table and untaggedlist_table access offset calculation - */ -#define GET_TAGLIST_TABLE_INDEX(list_id, vlan_id) \ - (((list_id) << 5) | (((vlan_id) & 0xFFF) >> 7)) -#define GET_TAGLIST_TABLE_BITMAP_IDX(vlan_id) (((vlan_id) >> 5) & 0x3) -#define GET_TAGLIST_TABLE_VLAN_BIT(vlan_id) \ - (0x1UL << ((vlan_id) & 0x1F)) - -#define TRUNK_FWDID_NOPORT 0xFFFF - -/** - * MAC type definition - */ -typedef enum { - MAC_TYPE_UC = 0, - MAC_TYPE_BC, - MAC_TYPE_MC, - MAC_TYPE_RSV, -} mac_type_e; - -/** - * Ethernet port definition - */ -typedef enum { - MAG_ETH_PORT0 = 0, - MAG_ETH_PORT1, - MAG_ETH_PORT2, - MAG_ETH_PORT3, - MAG_ETH_PORT4, - MAG_ETH_PORT5, - MAG_ETH_PORT6, - MAG_ETH_PORT7, - MAG_ETH_PORT8, - MAG_ETH_PORT9, -} mag_eth_port_e; - -/** - * vlan filter type defined - */ -typedef enum { - VSW_VLAN_MODE_ALL = 0, - VSW_VLAN_MODE_ACCESS, - VSW_VLAN_MODE_TRUNK, - VSW_VLAN_MODE_HYBRID, - VSW_VLAN_MODE_QINQ, - VSW_VLAN_MODE_MAX, -} vsw_vlan_mode_e; - -/** - * MAC table query forwarding port type definition - */ -typedef enum { - VSW_FWD_TYPE_FUNCTION = 0, /* forward type function */ - VSW_FWD_TYPE_VMDQ, /* forward type function-queue(vmdq) */ - VSW_FWD_TYPE_PORT, /* forward type port */ - VSW_FWD_TYPE_FIC, /* forward type fic */ - VSW_FWD_TYPE_TRUNK, /* forward type trunk */ - VSW_FWD_TYPE_DP, /* forward type DP */ - VSW_FWD_TYPE_MC, /* forward type multicast */ - - /* START: is not used and has to be removed */ - VSW_FWD_TYPE_BC, /* forward type broadcast */ - VSW_FWD_TYPE_PF, /* forward type pf */ - /* END: is not used and has to be removed */ - - VSW_FWD_TYPE_NULL, /* forward type null */ -} vsw_fwd_type_e; - -/** - * Eth-Trunk port aggregation mode - */ -typedef enum { - VSW_ETRK_MODE_STANDBY, - VSW_ETRK_MODE_SMAC, - VSW_ETRK_MODE_DMAC, - VSW_ETRK_MODE_SMACDMAC, - VSW_ETRK_MODE_SIP, - VSW_ETRK_MODE_DIP, - VSW_ETRK_MODE_SIPDIP, - VSW_ETRK_MODE_5TUPLES, - VSW_ETRK_MODE_LACP, - VSW_ETRK_MODE_MAX, -} vsw_etrk_mode_e; - -/** - * Eth-Trunk port aggregation mode - */ -typedef enum { - TRUNK_MODE_STANDBY, - TRUNK_MODE_SMAC, - TRUNK_MODE_DMAC, - TRUNK_MODE_SMACDMAC, - TRUNK_MODE_SIP, - TRUNK_MODE_DIP, - TRUNK_MODE_SIPDIP, - TRUNK_MODE_5TUPLES, - TRUNK_MODE_SIPV6, - TRUNK_MODE_DIPV6, - TRUNK_MODE_SIPDIPV6, - TRUNK_MODE_5TUPLESV6, - TRUNK_MODE_LACP, -} trunk_mode_s; - -/* ACL key type */ -enum { - ACL_KEY_IPV4 = 0, - ACL_KEY_IPV6 -}; - -/* ACL filter action */ -enum { - ACL_ACTION_PERMIT = 0, - ACL_ACTION_DENY -}; - -/* ACL action button*/ -enum { - ACL_ACTION_OFF = 0, - ACL_ACTION_ON, -}; - -/* ACL statistic action*/ -enum { - ACL_ACTION_NO_COUNTER = 0, - ACL_ACTION_COUNT_PKT, - ACL_ACTION_COUNT_PKT_LEN, -}; - -/* ACL redirect action*/ -enum { - ACL_ACTION_FORWAR_UP = 1, - ACL_ACTION_FORWAR_PORT, - ACL_ACTION_FORWAR_NEXT_HOP, - ACL_ACTION_FORWAR_OTHER, -}; - -enum { - CEQ_TIMER_STOP = 0, - CEQ_TIMER_START, -}; - -enum { - CEQ_API_DISPATCH = 0, - CEQ_API_NOT_DISPATCH, -}; - -enum { - CEQ_MODE = 1, - INT_MODE, -}; - -enum { - ER_MODE_VEB, - ER_MODE_VEPA, - ER_MODE_MULTI, - ER_MODE_NULL, -}; - -#ifdef __cplusplus -#if __cplusplus -} -#endif -#endif /* __cplusplus */ -#endif /* __L2_TABLE_PUB_H__ */ -- 1.8.3

1 0

[PATCH 1/4] btrfs: delayed-inode: Kill the BUG_ON() in btrfs_delete_delayed_dir_index()
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Qu Wenruo <wqu(a)suse.com> mainline inclusion from mainline-v5.4-rc1 commit 933c22a7512c5c09b1fdc46b557384efe8d03233 category: bugfix bugzilla: 13690 CVE: CVE-2019-19813 ------------------------------------------------- There is one report of fuzzed image which leads to BUG_ON() in btrfs_delete_delayed_dir_index(). Although that fuzzed image can already be addressed by enhanced extent-tree error handler, it's still better to hunt down more BUG_ON(). This patch will hunt down two BUG_ON()s in btrfs_delete_delayed_dir_index(): - One for error from btrfs_delayed_item_reserve_metadata() Instead of BUG_ON(), we output an error message and free the item. And return the error. All callers of this function handles the error by aborting current trasaction. - One for possible EEXIST from __btrfs_add_delayed_deletion_item() That function can return -EEXIST. We already have a good enough error message for that, only need to clean up the reserved metadata space and allocated item. To help above cleanup, also modifiy __btrfs_remove_delayed_item() called in btrfs_release_delayed_item(), to skip unassociated item. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203253 Signed-off-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> Conflicts: fs/btrfs/delayed-inode.c [yyl: adjust context] Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/delayed-inode.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/delayed-inode.c b/fs/btrfs/delayed-inode.c index e9522f2..5dc6141 100644 --- a/fs/btrfs/delayed-inode.c +++ b/fs/btrfs/delayed-inode.c @@ -471,6 +471,9 @@ static void __btrfs_remove_delayed_item(struct btrfs_delayed_item *delayed_item) struct rb_root *root; struct btrfs_delayed_root *delayed_root; + /* Not associated with any delayed_node */ + if (!delayed_item->delayed_node) + return; delayed_root = delayed_item->delayed_node->root->fs_info->delayed_root; BUG_ON(!delayed_root); @@ -1526,7 +1529,12 @@ int btrfs_delete_delayed_dir_index(struct btrfs_trans_handle *trans, * we have reserved enough space when we start a new transaction, * so reserving metadata failure is impossible. */ - BUG_ON(ret); + if (ret < 0) { + btrfs_err(trans->fs_info, +"metadata reservation failed for delayed dir item deltiona, should have been reserved"); + btrfs_release_delayed_item(item); + goto end; + } mutex_lock(&node->mutex); ret = __btrfs_add_delayed_deletion_item(node, item); @@ -1534,7 +1542,8 @@ int btrfs_delete_delayed_dir_index(struct btrfs_trans_handle *trans, btrfs_err(trans->fs_info, "err add delayed dir index item(index: %llu) into the deletion tree of the delayed node(root id: %llu, inode id: %llu, errno: %d)", index, node->root->objectid, node->inode_id, ret); - BUG(); + btrfs_delayed_item_release_metadata(dir->root, item); + btrfs_release_delayed_item(item); } mutex_unlock(&node->mutex); end: -- 1.8.3

1 3

[PATCH 01/30] net: hns3: add one printing information in hnae3_unregister_client() function
by Yang Yingliang 17 Apr '20

17 Apr '20

From: shenhao <shenhao21(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA ----------------------------------------------------- This patch adds one printing information to let user know the client does not exist when unregister a noneexistent client. Signed-off-by: Guangbin Huang <huangguangbin2(a)huawei.com> Signed-off-by: shenhao <shenhao21(a)huawei.com> Reviewed-by: Zhong Zhaohui <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.c b/drivers/net/ethernet/hisilicon/hns3/hnae3.c index 4afa509..53a87b3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.c +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.c @@ -156,6 +156,7 @@ void hnae3_unregister_client(struct hnae3_client *client) if (!existed) { mutex_unlock(&hnae3_common_lock); + pr_err("client %s does not exist!\n", client->name); return; } -- 1.8.3

1 29

[PATCH 001/193] net: hns3: update hns3 version to 1.9.37.4
by Yang Yingliang 17 Apr '20

17 Apr '20

From: youshengzui <youshengzui(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA -------------------------- This patch is used to modify the hns3 driver version to 1.9.37.4 Signed-off-by: youshengzui <youshengzui(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Zhaohui Zhong <zhongzhaohui(a)huawei.com> Reviewed-by: Junxin Chen <chenjunxin1(a)huawei.com> Reviewed-by: Zhong Zhaohui <zhongzhaohui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hnae3.h b/drivers/net/ethernet/hisilicon/hns3/hnae3.h index f795bfd..98dfa7c 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hnae3.h +++ b/drivers/net/ethernet/hisilicon/hns3/hnae3.h @@ -30,7 +30,7 @@ #include <linux/pci.h> #include <linux/types.h> -#define HNAE3_MOD_VERSION "1.9.37.3" +#define HNAE3_MOD_VERSION "1.9.37.4" #define HNAE3_MIN_VECTOR_NUM 2 /* one for msi-x, another for IO */ diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h index 3977883..630f642 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_version.h @@ -4,7 +4,7 @@ #ifndef __HNS3_CAE_VERSION_H__ #define __HNS3_CAE_VERSION_H__ -#define HNS3_CAE_MOD_VERSION "1.9.37.3" +#define HNS3_CAE_MOD_VERSION "1.9.37.4" #define CMT_ID_LEN 8 #define RESV_LEN 3 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h index 5f1d5a3..9e11ec3 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3_enet.h @@ -8,7 +8,7 @@ #include "hnae3.h" -#define HNS3_MOD_VERSION "1.9.37.3" +#define HNS3_MOD_VERSION "1.9.37.4" extern char hns3_driver_version[]; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h index 0146470..5e64d2a 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.h @@ -12,7 +12,7 @@ #include "hclge_cmd.h" #include "hnae3.h" -#define HCLGE_MOD_VERSION "1.9.37.3" +#define HCLGE_MOD_VERSION "1.9.37.4" #define HCLGE_DRIVER_NAME "hclge" #define HCLGE_MAX_PF_NUM 8 diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h index 51af1050..596618e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h @@ -10,7 +10,7 @@ #include "hclgevf_cmd.h" #include "hnae3.h" -#define HCLGEVF_MOD_VERSION "1.9.37.3" +#define HCLGEVF_MOD_VERSION "1.9.37.4" #define HCLGEVF_DRIVER_NAME "hclgevf" #define HCLGEVF_MAX_VLAN_ID 4095 -- 1.8.3

1 192

[PATCH 01/40] perf/amd/uncore: Replace manual sampling check with CAP_NO_INTERRUPT flag
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Kim Phillips <kim.phillips(a)amd.com> [ Upstream commit f967140dfb7442e2db0868b03b961f9c59418a1b ] Enable the sampling check in kernel/events/core.c::perf_event_open(), which returns the more appropriate -EOPNOTSUPP. BEFORE: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (l3_request_g1.caching_l3_cache_accesses). /bin/dmesg | grep -i perf may provide additional information. With nothing relevant in dmesg. AFTER: $ sudo perf record -a -e instructions,l3_request_g1.caching_l3_cache_accesses true Error: l3_request_g1.caching_l3_cache_accesses: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' Fixes: c43ca5091a37 ("perf/x86/amd: Add support for AMD NB and L2I "uncore" counters") Signed-off-by: Kim Phillips <kim.phillips(a)amd.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Acked-by: Peter Zijlstra <peterz(a)infradead.org> Cc: stable(a)vger.kernel.org Link: https://lkml.kernel.org/r/20200311191323.13124-1-kim.phillips@amd.com Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/events/amd/uncore.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/x86/events/amd/uncore.c b/arch/x86/events/amd/uncore.c index baa7e36..604a855 100644 --- a/arch/x86/events/amd/uncore.c +++ b/arch/x86/events/amd/uncore.c @@ -193,20 +193,18 @@ static int amd_uncore_event_init(struct perf_event *event) /* * NB and Last level cache counters (MSRs) are shared across all cores - * that share the same NB / Last level cache. Interrupts can be directed - * to a single target core, however, event counts generated by processes - * running on other cores cannot be masked out. So we do not support - * sampling and per-thread events. + * that share the same NB / Last level cache. On family 16h and below, + * Interrupts can be directed to a single target core, however, event + * counts generated by processes running on other cores cannot be masked + * out. So we do not support sampling and per-thread events via + * CAP_NO_INTERRUPT, and we do not enable counter overflow interrupts: */ - if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK) - return -EINVAL; /* NB and Last level cache counters do not have usr/os/guest/host bits */ if (event->attr.exclude_user || event->attr.exclude_kernel || event->attr.exclude_host || event->attr.exclude_guest) return -EINVAL; - /* and we do not enable counter overflow interrupts */ hwc->config = event->attr.config & AMD64_RAW_EVENT_MASK_NB; hwc->idx = -1; @@ -314,6 +312,7 @@ static ssize_t amd_uncore_attr_show_cpumask(struct device *dev, .start = amd_uncore_start, .stop = amd_uncore_stop, .read = amd_uncore_read, + .capabilities = PERF_PMU_CAP_NO_INTERRUPT, }; static struct pmu amd_llc_pmu = { @@ -324,6 +323,7 @@ static ssize_t amd_uncore_attr_show_cpumask(struct device *dev, .start = amd_uncore_start, .stop = amd_uncore_stop, .read = amd_uncore_read, + .capabilities = PERF_PMU_CAP_NO_INTERRUPT, }; static struct amd_uncore *amd_uncore_alloc(unsigned int cpu) -- 1.8.3

1 39

[PATCH 1/9] hpre: dfx for IO operation and delay
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: feature bugzilla: NA CVE: NA In this patch, we try to add dfx for io operation, including send/ recv/send_fail/send_busy. We also can define overtime_threshold to judge timeout task. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Mingqiang Ling <lingmingqiang(a)huawei.com> Reviewed-by: Guangwei Zhou <zhouguangwei5(a)huawei.com> Reviewed-by: Ye Kai <yekai13(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/hpre/hpre.h | 16 ++++++ drivers/crypto/hisilicon/hpre/hpre_crypto.c | 89 ++++++++++++++++++++++++----- drivers/crypto/hisilicon/hpre/hpre_main.c | 55 ++++++++++++++++++ 3 files changed, 146 insertions(+), 14 deletions(-) diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h index 42b2f2a..203eb2a 100644 --- a/drivers/crypto/hisilicon/hpre/hpre.h +++ b/drivers/crypto/hisilicon/hpre/hpre.h @@ -25,6 +25,16 @@ enum hpre_ctrl_dbgfs_file { HPRE_DEBUG_FILE_NUM, }; +enum hpre_dfx_dbgfs_file { + HPRE_SEND_CNT, + HPRE_RECV_CNT, + HPRE_SEND_FAIL_CNT, + HPRE_SEND_BUSY_CNT, + HPRE_OVER_THRHLD_CNT, + HPRE_OVERTIME_THRHLD, + HPRE_DFX_FILE_NUM +}; + #define HPRE_DEBUGFS_FILE_NUM (HPRE_DEBUG_FILE_NUM + HPRE_CLUSTERS_NUM - 1) struct hpre_debugfs_file { @@ -34,12 +44,18 @@ struct hpre_debugfs_file { struct hpre_debug *debug; }; +struct hpre_dfx { + atomic64_t value; + enum hpre_dfx_dbgfs_file type; +}; + /* * One HPRE controller has one PF and multiple VFs, some global configurations * which PF has need this structure. * Just relevant for PF. */ struct hpre_debug { + struct hpre_dfx dfx[HPRE_DFX_FILE_NUM]; struct hpre_debugfs_file files[HPRE_DEBUGFS_FILE_NUM]; }; diff --git a/drivers/crypto/hisilicon/hpre/hpre_crypto.c b/drivers/crypto/hisilicon/hpre/hpre_crypto.c index 7610e13..b68b30c 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_crypto.c +++ b/drivers/crypto/hisilicon/hpre/hpre_crypto.c @@ -10,6 +10,7 @@ #include <linux/dma-mapping.h> #include <linux/fips.h> #include <linux/module.h> +#include <linux/time.h> #include "hpre.h" struct hpre_ctx; @@ -68,6 +69,7 @@ struct hpre_dh_ctx { struct hpre_ctx { struct hisi_qp *qp; struct hpre_asym_request **req_list; + struct hpre *hpre; spinlock_t req_lock; unsigned int key_sz; bool crt_g2_mode; @@ -90,6 +92,7 @@ struct hpre_asym_request { int err; int req_id; hpre_cb cb; + struct timespec64 req_time; }; static DEFINE_MUTEX(hpre_alg_lock); @@ -119,6 +122,7 @@ static void hpre_free_req_id(struct hpre_ctx *ctx, int req_id) static int hpre_add_req_to_ctx(struct hpre_asym_request *hpre_req) { struct hpre_ctx *ctx; + struct hpre_dfx *dfx; int id; ctx = hpre_req->ctx; @@ -129,6 +133,10 @@ static int hpre_add_req_to_ctx(struct hpre_asym_request *hpre_req) ctx->req_list[id] = hpre_req; hpre_req->req_id = id; + dfx = ctx->hpre->debug.dfx; + if (atomic64_read(&dfx[HPRE_OVERTIME_THRHLD].value)) + ktime_get_ts64(&hpre_req->req_time); + return id; } @@ -308,12 +316,16 @@ static int hpre_alg_res_post_hf(struct hpre_ctx *ctx, struct hpre_sqe *sqe, static int hpre_ctx_set(struct hpre_ctx *ctx, struct hisi_qp *qp, int qlen) { + struct hpre *hpre; + if (!ctx || !qp || qlen < 0) return -EINVAL; spin_lock_init(&ctx->req_lock); ctx->qp = qp; + hpre = container_of(ctx->qp->qm, struct hpre, qm); + ctx->hpre = hpre; ctx->req_list = kcalloc(qlen, sizeof(void *), GFP_KERNEL); if (!ctx->req_list) return -ENOMEM; @@ -336,30 +348,67 @@ static void hpre_ctx_clear(struct hpre_ctx *ctx, bool is_clear_all) ctx->key_sz = 0; } +static bool hpre_is_bd_timeout(struct hpre_asym_request *req, + u64 overtime_thrhld) +{ + struct timespec64 reply_time; + u64 time_use_us; + +#define HPRE_DFX_SEC_TO_US 1000000 +#define HPRE_DFX_US_TO_NS 1000 + + ktime_get_ts64(&reply_time); + time_use_us = (reply_time.tv_sec - req->req_time.tv_sec) * + HPRE_DFX_SEC_TO_US + + (reply_time.tv_nsec - req->req_time.tv_nsec) / + HPRE_DFX_US_TO_NS; + + if (time_use_us <= overtime_thrhld) + return false; + + return true; +} + static void hpre_dh_cb(struct hpre_ctx *ctx, void *resp) { + struct hpre_dfx *dfx = ctx->hpre->debug.dfx; struct hpre_asym_request *req; struct kpp_request *areq; + u64 overtime_thrhld; int ret; ret = hpre_alg_res_post_hf(ctx, resp, (void **)&req); areq = req->areq.dh; areq->dst_len = ctx->key_sz; + + overtime_thrhld = atomic64_read(&dfx[HPRE_OVERTIME_THRHLD].value); + if (overtime_thrhld && hpre_is_bd_timeout(req, overtime_thrhld)) + atomic64_inc(&dfx[HPRE_OVER_THRHLD_CNT].value); + hpre_hw_data_clr_all(ctx, req, areq->dst, areq->src); kpp_request_complete(areq, ret); + atomic64_inc(&dfx[HPRE_RECV_CNT].value); } static void hpre_rsa_cb(struct hpre_ctx *ctx, void *resp) { + struct hpre_dfx *dfx = ctx->hpre->debug.dfx; struct hpre_asym_request *req; struct akcipher_request *areq; + u64 overtime_thrhld; int ret; ret = hpre_alg_res_post_hf(ctx, resp, (void **)&req); + + overtime_thrhld = atomic64_read(&dfx[HPRE_OVERTIME_THRHLD].value); + if (overtime_thrhld && hpre_is_bd_timeout(req, overtime_thrhld)) + atomic64_inc(&dfx[HPRE_OVER_THRHLD_CNT].value); + areq = req->areq.rsa; areq->dst_len = ctx->key_sz; hpre_hw_data_clr_all(ctx, req, areq->dst, areq->src); akcipher_request_complete(areq, ret); + atomic64_inc(&dfx[HPRE_RECV_CNT].value); } static void hpre_alg_cb(struct hisi_qp *qp, void *resp) @@ -435,6 +484,29 @@ static int hpre_msg_request_set(struct hpre_ctx *ctx, void *req, bool is_rsa) return 0; } +static int hpre_send(struct hpre_ctx *ctx, struct hpre_sqe *msg) +{ + struct hpre_dfx *dfx = ctx->hpre->debug.dfx; + int ctr = 0; + int ret; + + do { + atomic64_inc(&dfx[HPRE_SEND_CNT].value); + ret = hisi_qp_send(ctx->qp, msg); + if (ret != -EBUSY) + break; + atomic64_inc(&dfx[HPRE_SEND_BUSY_CNT].value); + } while (ctr++ < HPRE_TRY_SEND_TIMES); + + if (likely(!ret)) + return ret; + + if (ret != -EBUSY) + atomic64_inc(&dfx[HPRE_SEND_FAIL_CNT].value); + + return ret; +} + #ifdef CONFIG_CRYPTO_DH static int hpre_dh_compute_value(struct kpp_request *req) { @@ -443,7 +515,6 @@ static int hpre_dh_compute_value(struct kpp_request *req) void *tmp = kpp_request_ctx(req); struct hpre_asym_request *hpre_req = PTR_ALIGN(tmp, HPRE_ALIGN_SZ); struct hpre_sqe *msg = &hpre_req->req; - int ctr = 0; int ret; ret = hpre_msg_request_set(ctx, req, false); @@ -464,11 +535,9 @@ static int hpre_dh_compute_value(struct kpp_request *req) msg->dw0 = cpu_to_le32(le32_to_cpu(msg->dw0) | HPRE_ALG_DH_G2); else msg->dw0 = cpu_to_le32(le32_to_cpu(msg->dw0) | HPRE_ALG_DH); - do { - ret = hisi_qp_send(ctx->qp, msg); - } while (ret == -EBUSY && ctr++ < HPRE_TRY_SEND_TIMES); /* success */ + ret = hpre_send(ctx, msg); if (likely(!ret)) return -EINPROGRESS; @@ -646,7 +715,6 @@ static int hpre_rsa_enc(struct akcipher_request *req) void *tmp = akcipher_request_ctx(req); struct hpre_asym_request *hpre_req = PTR_ALIGN(tmp, HPRE_ALIGN_SZ); struct hpre_sqe *msg = &hpre_req->req; - int ctr = 0; int ret; /* For 512 and 1536 bits key size, use soft tfm instead */ @@ -676,11 +744,8 @@ static int hpre_rsa_enc(struct akcipher_request *req) if (unlikely(ret)) goto clear_all; - do { - ret = hisi_qp_send(ctx->qp, msg); - } while (ret == -EBUSY && ctr++ < HPRE_TRY_SEND_TIMES); - /* success */ + ret = hpre_send(ctx, msg); if (likely(!ret)) return -EINPROGRESS; @@ -698,7 +763,6 @@ static int hpre_rsa_dec(struct akcipher_request *req) void *tmp = akcipher_request_ctx(req); struct hpre_asym_request *hpre_req = PTR_ALIGN(tmp, HPRE_ALIGN_SZ); struct hpre_sqe *msg = &hpre_req->req; - int ctr = 0; int ret; /* For 512 and 1536 bits key size, use soft tfm instead */ @@ -735,11 +799,8 @@ static int hpre_rsa_dec(struct akcipher_request *req) if (unlikely(ret)) goto clear_all; - do { - ret = hisi_qp_send(ctx->qp, msg); - } while (ret == -EBUSY && ctr++ < HPRE_TRY_SEND_TIMES); - /* success */ + ret = hpre_send(ctx, msg); if (likely(!ret)) return -EINPROGRESS; diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index f727158..2ede8d78 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -169,6 +169,15 @@ struct hpre_hw_error { {"INT_STATUS ", HPRE_INT_STATUS}, }; +static const char *hpre_dfx_files[HPRE_DFX_FILE_NUM] = { + "send_cnt", + "recv_cnt", + "send_fail_cnt", + "send_busy_cnt", + "over_thrhld_cnt", + "overtime_thrhld" +}; + #ifdef CONFIG_CRYPTO_QM_UACCE static int uacce_mode_set(const char *val, const struct kernel_param *kp) { @@ -588,6 +597,33 @@ static ssize_t hpre_ctrl_debug_write(struct file *filp, const char __user *buf, .write = hpre_ctrl_debug_write, }; +static int hpre_debugfs_atomic64_get(void *data, u64 *val) +{ + struct hpre_dfx *dfx_item = data; + + *val = atomic64_read(&dfx_item->value); + return 0; +} + +static int hpre_debugfs_atomic64_set(void *data, u64 val) +{ + struct hpre_dfx *dfx_item = data; + + if (dfx_item->type == HPRE_OVERTIME_THRHLD) { + struct hpre_dfx *hpre_dfx = dfx_item - HPRE_OVERTIME_THRHLD; + + atomic64_set(&hpre_dfx[HPRE_OVER_THRHLD_CNT].value, 0); + } else if (val) { + return -EINVAL; + } + + atomic64_set(&dfx_item->value, val); + return 0; +} + +DEFINE_DEBUGFS_ATTRIBUTE(hpre_atomic64_ops, hpre_debugfs_atomic64_get, + hpre_debugfs_atomic64_set, "%llu\n"); + static int hpre_create_debugfs_file(struct hpre_debug *dbg, struct dentry *dir, enum hpre_ctrl_dbgfs_file type, int indx) { @@ -691,6 +727,22 @@ static int hpre_ctrl_debug_init(struct hpre_debug *debug) return hpre_cluster_debugfs_init(debug); } +static void hpre_dfx_debug_init(struct hpre_debug *debug) +{ + struct hpre *hpre = container_of(debug, struct hpre, debug); + struct hpre_dfx *dfx = hpre->debug.dfx; + struct hisi_qm *qm = &hpre->qm; + struct dentry *parent; + int i; + + parent = debugfs_create_dir("hpre_dfx", qm->debug.debug_root); + for (i = 0; i < HPRE_DFX_FILE_NUM; i++) { + dfx[i].type = i; + debugfs_create_file(hpre_dfx_files[i], 0644, parent, &dfx[i], + &hpre_atomic64_ops); + } +} + static int hpre_debugfs_init(struct hisi_qm *qm) { struct hpre *hpre = container_of(qm, struct hpre, qm); @@ -709,6 +761,9 @@ static int hpre_debugfs_init(struct hisi_qm *qm) if (ret) goto failed_to_create; } + + hpre_dfx_debug_init(&hpre->debug); + return 0; failed_to_create: -- 1.8.3

1 8

[PATCH 01/92] KVM: SVM: fix up incorrect backport
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> When I backported 52918ed5fcf0 ("KVM: SVM: Override default MMIO mask if memory encryption is enabled") to 4.19 (which resulted in commit a4e761c9f63a ("KVM: SVM: Override default MMIO mask if memory encryption is enabled")), I messed up the call to kvm_mmu_set_mmio_spte_mask() Fix that here now. Reported-by: Tom Lendacky <thomas.lendacky(a)amd.com> Cc: Sean Christopherson <sean.j.christopherson(a)intel.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/kvm/svm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index 3f0565e..cc8f3b41 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -1336,7 +1336,7 @@ static __init void svm_adjust_mmio_mask(void) */ mask = (mask_bit < 52) ? rsvd_bits(mask_bit, 51) | PT_PRESENT_MASK : 0; - kvm_mmu_set_mmio_spte_mask(mask, PT_WRITABLE_MASK | PT_USER_MASK); + kvm_mmu_set_mmio_spte_mask(mask, mask); } static __init int svm_hardware_setup(void) -- 1.8.3

1 91

[PATCH 1/5] Revert "dm crypt: fix benbi IV constructor crash if used in authenticated mode"
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31797 CVE: NA ------------------------- The next two patches to be reverted will conflict with this patch. Let's revert this patch and merge the original patch. This reverts commit 808f3768deec5e1a5c9d2a4a2d8593fbbaf3e4cc. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: ZhangXiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/md/dm-crypt.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index d451f98..aa7f741 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -563,14 +563,8 @@ static int crypt_iv_essiv_gen(struct geniv_ctx *ctx, static int crypt_iv_benbi_ctr(struct geniv_ctx *ctx) { - unsigned bs; - int log; - - if (test_bit(CRYPT_MODE_INTEGRITY_AEAD, &ctx->cipher_flags)) - bs = crypto_aead_blocksize(ctx->tfms.tfms_aead[0]); - else - bs = crypto_skcipher_blocksize(ctx->tfms.tfms[0]); - log = ilog2(bs); + unsigned int bs = crypto_skcipher_blocksize(ctx->tfms.tfms[0]); + int log = ilog2(bs); /* we need to calculate how far we must shift the sector count * to get the cipher block count, we use this shift in _gen */ -- 1.8.3

1 4

[PATCH] arm64: clear_page: Add new implementation of clear_page() by STNP
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Wei Li <liwei391(a)huawei.com> hulk inclusion category: feature bugzilla: 31400 CVE: NA --------------------------- Currently, clear_page() clear the page through 'dc zva', while the page may not be used immediately mostly, so the cache flush is in vain. Add an optimized implementation of clear_page() by 'stnp' for performance promotion. It can be switched by the boot cmdline 'mm.use_clearpage_stnp'. In the hugetlb clear test, we gained about 53.7% performance improvement: Set mm.use_clearpage_stnp = 0 | Set mm.use_clearpage_stnp = 1 [root@localhost liwei]# ./a.out 50 20 | [root@localhost liwei]# ./a.out 50 20 size is 50 Gib, test times is 20 | size is 50 Gib, test times is 20 test_time[0] : use 8.438046 sec | test_time[0] : use 3.722682 sec test_time[1] : use 8.028493 sec | test_time[1] : use 3.640274 sec test_time[2] : use 8.646547 sec | test_time[2] : use 4.095052 sec test_time[3] : use 8.122490 sec | test_time[3] : use 3.998446 sec test_time[4] : use 8.053038 sec | test_time[4] : use 4.084259 sec test_time[5] : use 8.843512 sec | test_time[5] : use 3.933871 sec test_time[6] : use 8.308906 sec | test_time[6] : use 3.934334 sec test_time[7] : use 8.093817 sec | test_time[7] : use 3.869142 sec test_time[8] : use 8.303504 sec | test_time[8] : use 3.902916 sec test_time[9] : use 8.178336 sec | test_time[9] : use 3.541885 sec test_time[10] : use 8.003625 sec | test_time[10] : use 3.595554 sec test_time[11] : use 8.163807 sec | test_time[11] : use 3.583813 sec test_time[12] : use 8.267464 sec | test_time[12] : use 3.863033 sec test_time[13] : use 8.055326 sec | test_time[13] : use 3.770953 sec test_time[14] : use 8.246986 sec | test_time[14] : use 3.808006 sec test_time[15] : use 8.546992 sec | test_time[15] : use 3.653194 sec test_time[16] : use 8.727256 sec | test_time[16] : use 3.722395 sec test_time[17] : use 8.288951 sec | test_time[17] : use 3.683508 sec test_time[18] : use 8.019322 sec | test_time[18] : use 4.253087 sec test_time[19] : use 8.250685 sec | test_time[19] : use 4.082845 sec hugetlb test end! | hugetlb test end! Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/include/asm/cpucaps.h | 3 ++- arch/arm64/kernel/cpufeature.c | 34 ++++++++++++++++++++++++++++++++++ arch/arm64/lib/clear_page.S | 21 +++++++++++++++++++++ 3 files changed, 57 insertions(+), 1 deletion(-) diff --git a/arch/arm64/include/asm/cpucaps.h b/arch/arm64/include/asm/cpucaps.h index a9090f2..3cd169f 100644 --- a/arch/arm64/include/asm/cpucaps.h +++ b/arch/arm64/include/asm/cpucaps.h @@ -56,7 +56,8 @@ #define ARM64_WORKAROUND_1463225 35 #define ARM64_HAS_CRC32 36 #define ARM64_SSBS 37 +#define ARM64_CLEARPAGE_STNP 38 -#define ARM64_NCAPS 38 +#define ARM64_NCAPS 39 #endif /* __ASM_CPUCAPS_H */ diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index b1f621c..8b84a47 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1232,6 +1232,34 @@ static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry, } #endif +static bool use_clearpage_stnp; + +static int __init early_use_clearpage_stnp(char *p) +{ + return strtobool(p, &use_clearpage_stnp); +} +early_param("mm.use_clearpage_stnp", early_use_clearpage_stnp); + +static bool has_mor_nontemporal(const struct arm64_cpu_capabilities *entry) +{ + /* + * List of CPUs which have memory ordering ruled non-temporal + * load and store. + */ + static const struct midr_range cpus[] = { + MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), + {}, + }; + + return is_midr_in_range_list(read_cpuid_id(), cpus); +} + +static bool can_clearpage_use_stnp(const struct arm64_cpu_capabilities *entry, + int scope) +{ + return use_clearpage_stnp && has_mor_nontemporal(entry); +} + static const struct arm64_cpu_capabilities arm64_features[] = { { .desc = "GIC system register CPU interface", @@ -1467,6 +1495,12 @@ static bool can_use_gic_priorities(const struct arm64_cpu_capabilities *entry, .cpu_enable = cpu_enable_ssbs, }, #endif + { + .desc = "Clear Page by STNP", + .capability = ARM64_CLEARPAGE_STNP, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = can_clearpage_use_stnp, + }, {}, }; diff --git a/arch/arm64/lib/clear_page.S b/arch/arm64/lib/clear_page.S index ef08e90..9aa1de1 100644 --- a/arch/arm64/lib/clear_page.S +++ b/arch/arm64/lib/clear_page.S @@ -18,6 +18,25 @@ #include <linux/const.h> #include <asm/assembler.h> #include <asm/page.h> +#include <asm/alternative.h> + +/* + * Clear page @dest + * + * Parameters: + * x0 - dest + */ +ENTRY(clear_page_stnp) + .align 6 +1: stnp xzr, xzr, [x0] + stnp xzr, xzr, [x0, #0x10] + stnp xzr, xzr, [x0, #0x20] + stnp xzr, xzr, [x0, #0x30] + add x0, x0, #0x40 + tst x0, #(PAGE_SIZE - 1) + b.ne 1b + ret +ENDPROC(clear_page_stnp) /* * Clear page @dest @@ -26,6 +45,8 @@ * x0 - dest */ ENTRY(clear_page) + ALTERNATIVE("nop", "b clear_page_stnp", ARM64_CLEARPAGE_STNP) + mrs x1, dczid_el0 and w1, w1, #0xf mov x2, #4 -- 1.8.3

1 0

[PATCH] RDMA/hns: optimize mtr management and fix mtr addressing bug
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Tao Jihua <taojihua4(a)huawei.com> driver inclusion category: Bugfix bugzilla: NA This modification is mainly to optimize mtr management and solve mtr addressing bug:When mtt_ba_pg_sz = 0, hem-> start / step = 1, which eventually results in an additional BA_BYTE_LEN added to the offset Signed-off-by: Tao Jihua <taojihua4(a)huawei.com> Reviewed-by: Hu Chunzhi <huchunzhi(a)huawei.com> Reviewed-by: Wang Lin <wanglin137(a)huawei.com> Reviewed-by: Zhao Weibo <zhaoweibo3(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_hem.c | 43 ++++++++++++++++---------------- 1 file changed, 21 insertions(+), 22 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hem.c b/drivers/infiniband/hw/hns/hns_roce_hem.c index 510c008..1911470 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hem.c +++ b/drivers/infiniband/hw/hns/hns_roce_hem.c @@ -1165,13 +1165,6 @@ struct roce_hem_item { int end; /* end buf offset in this hem */ }; -#define hem_list_for_each(pos, n, head) \ - list_for_each_entry_safe(pos, n, head, list) - -#define hem_list_del_item(hem) list_del(&hem->list) -#define hem_list_add_item(hem, head) list_add(&hem->list, head) -#define hem_list_link_item(hem, head) list_add(&hem->sibling, head) - static struct roce_hem_item *hem_list_alloc_item(struct hns_roce_dev *hr_dev, int start, int end, int count, bool exist_bt, @@ -1216,8 +1209,8 @@ static void hem_list_free_all(struct hns_roce_dev *hr_dev, { struct roce_hem_item *hem, *temp_hem; - hem_list_for_each(hem, temp_hem, head) { - hem_list_del_item(hem); + list_for_each_entry_safe(hem, temp_hem, head, list) { + list_del(&hem->list); hem_list_free_item(hr_dev, hem, exist_bt); } } @@ -1249,7 +1242,7 @@ static struct roce_hem_item *hem_list_search_item(struct list_head *ba_list, struct roce_hem_item *hem, *temp_hem; struct roce_hem_item *found = NULL; - hem_list_for_each(hem, temp_hem, ba_list) { + list_for_each_entry_safe(hem, temp_hem, ba_list, list) { if (hem_list_page_is_in_range(hem, page_offset)) { found = hem; break; @@ -1391,9 +1384,9 @@ static int hem_list_alloc_mid_bt(struct hns_roce_dev *hr_dev, goto err_exit; } hem_ptrs[level] = cur; - hem_list_add_item(cur, &temp_list[level]); + list_add(&cur->list, &temp_list[level]); if (hem_list_is_bottom_bt(hopnum, level)) - hem_list_link_item(cur, &temp_list[0]); + list_add(&cur->sibling, &temp_list[0]); /* link bt to parent bt */ if (level > 1) { @@ -1430,6 +1423,7 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev, void *cpu_base; u64 phy_base; int ret = 0; + int ba_num; int offset; int total; int step; @@ -1440,15 +1434,19 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev, if (root_hem) return 0; + ba_num = hns_roce_hem_list_calc_root_ba(regions, region_cnt, unit); + if (ba_num < 1) + return -ENOMEM; + INIT_LIST_HEAD(&temp_root); - total = r->offset; + offset = r->offset; /* indicate to last region */ r = &regions[region_cnt - 1]; - root_hem = hem_list_alloc_item(hr_dev, total, r->offset + r->count - 1, - unit, true, 0); + root_hem = hem_list_alloc_item(hr_dev, offset, r->offset + r->count - 1, + ba_num, true, 0); if (!root_hem) return -ENOMEM; - hem_list_add_item(root_hem, &temp_root); + list_add(&root_hem->list, &temp_root); hem_list->root_ba = root_hem->dma_addr; @@ -1457,7 +1455,7 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev, INIT_LIST_HEAD(&temp_list[i]); total = 0; - for (i = 0; i < region_cnt && total < unit; i++) { + for (i = 0; i < region_cnt && total < ba_num; i++) { r = &regions[i]; if (!r->count) continue; @@ -1478,8 +1476,8 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev, goto err_exit; } hem_list_assign_bt(hr_dev, hem, cpu_base, phy_base); - hem_list_add_item(hem, &temp_list[i]); - hem_list_link_item(hem, &temp_btm); + list_add(&hem->list, &temp_list[i]); + list_add(&hem->sibling, &temp_btm); total += r->count; } else { step = hem_list_calc_ba_range(r->hopnum, 1, unit); @@ -1488,9 +1486,10 @@ static int hem_list_alloc_root_bt(struct hns_roce_dev *hr_dev, goto err_exit; } /* if exist mid bt, link L1 to L0 */ - hem_list_for_each(hem, temp_hem, - &hem_list->mid_bt[i][1]) { - offset = hem->start / step * BA_BYTE_LEN; + list_for_each_entry_safe(hem, temp_hem, + &hem_list->mid_bt[i][1], list) { + offset = ((hem->start - r->offset) / step) * + BA_BYTE_LEN; hem_list_link_bt(hr_dev, cpu_base + offset, hem->dma_addr); total++; -- 1.8.3

1 0

[PATCH 001/160] irqchip/gic-v3-its: Fix misuse of GENMASK macro
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Joe Perches <joe(a)perches.com> [ Upstream commit 20faba848752901de23a4d45a1174d64d2069dde ] Arguments are supposed to be ordered high then low. Signed-off-by: Joe Perches <joe(a)perches.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Acked-by: Marc Zyngier <marc.zyngier(a)arm.com> Link: https://lkml.kernel.org/r/ab5deb4fc3cd604cb620054770b7d00016d736bc.15627348… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/irqchip/irq-gic-v3-its.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 4a9c14f..860f3ef 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -215,7 +215,7 @@ static struct its_collection *dev_event_to_col(struct its_device *its_dev, static struct its_collection *valid_col(struct its_collection *col) { - if (WARN_ON_ONCE(col->target_address & GENMASK_ULL(0, 15))) + if (WARN_ON_ONCE(col->target_address & GENMASK_ULL(15, 0))) return NULL; return col; -- 1.8.3

1 159

[PATCH 1/2] sec: Overall optimization of sec code
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA 1. we delete sec_usr_if.h, then move the define of sec hardware structure into sec_crypto.h and normalize two structure types. 2. In sec_main.c, we remove fusion_limit/fusion_time, because this part of logic is not used in the end. We also optimize the logic of debugfs without judging some return codes, because this does not affect the driver loading. Probe flow is also be optimized, including add sec_iommu_used_check, modify sec_probe_init, realize sec_qm_pre_init and so on. 3. In sec.h, we define structure of sec_ctx, which defines queue/cipher/ request .etc relatives. 4. In sec_crypto.c，we encapsulate independent interfaces, such as init/ uninit/map/unmap/callback/alloc resource/free resource/encrypt/decrypt/ filling hardware descriptor/set key .etc, which removes fusion logic and is easy to expand algorithm. Meanwhile, we remove DES algorithm support, because of its weak key. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Cheng Hu <hucheng.hu(a)huawei.com> Reviewed-by: Guangwei Zhou <zhouguangwei5(a)huawei.com> Reviewed-by: Ye Kai <yekai13(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/qm.c | 3 +- drivers/crypto/hisilicon/sec2/sec.h | 166 ++- drivers/crypto/hisilicon/sec2/sec_crypto.c | 1770 +++++++++++----------------- drivers/crypto/hisilicon/sec2/sec_crypto.h | 237 +++- drivers/crypto/hisilicon/sec2/sec_main.c | 541 ++++----- drivers/crypto/hisilicon/sec2/sec_usr_if.h | 179 --- 6 files changed, 1246 insertions(+), 1650 deletions(-) delete mode 100644 drivers/crypto/hisilicon/sec2/sec_usr_if.h diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index d3429e7..8b49902 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -1389,6 +1389,7 @@ static int qm_sq_ctx_cfg(struct hisi_qp *qp, int qp_id, int pasid) sqc->w13 = cpu_to_le16(QM_MK_SQC_W13(0, 1, qp->alg_type)); ret = qm_mb(qm, QM_MB_CMD_SQC, sqc_dma, qp_id, 0); + dma_unmap_single(dev, sqc_dma, sizeof(struct qm_sqc), DMA_TO_DEVICE); kfree(sqc); @@ -1598,7 +1599,7 @@ static int hisi_qm_stop_qp_nolock(struct hisi_qp *qp) else flush_work(&qp->qm->work); - /* wait for increase used count in qp send and last poll qp finish */ + /* waiting for increase used count in qp send and last poll qp finish */ udelay(WAIT_PERIOD); if (unlikely(qp->is_resetting && atomic_read(&qp->qp_status.used))) qp_stop_fail_cb(qp); diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h index f85dd06..e3b581a 100644 --- a/drivers/crypto/hisilicon/sec2/sec.h +++ b/drivers/crypto/hisilicon/sec2/sec.h @@ -1,19 +1,124 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* Copyright (c) 2018-2019 HiSilicon Limited. */ -#ifndef HISI_SEC_H -#define HISI_SEC_H +#ifndef __HISI_SEC_V2_H +#define __HISI_SEC_V2_H #include <linux/list.h> + #include "../qm.h" -#include "sec_usr_if.h" +#include "sec_crypto.h" + +/* Algorithm resource per hardware SEC queue */ +struct sec_alg_res { + u8 *pbuf; + dma_addr_t pbuf_dma; + u8 *c_ivin; + dma_addr_t c_ivin_dma; + u8 *out_mac; + dma_addr_t out_mac_dma; +}; + +/* Cipher request of SEC private */ +struct sec_cipher_req { + struct hisi_acc_hw_sgl *c_in; + dma_addr_t c_in_dma; + struct hisi_acc_hw_sgl *c_out; + dma_addr_t c_out_dma; + u8 *c_ivin; + dma_addr_t c_ivin_dma; + struct skcipher_request *sk_req; + u32 c_len; + bool encrypt; +}; + +/* SEC request of Crypto */ +struct sec_req { + struct sec_sqe sec_sqe; + struct sec_ctx *ctx; + struct sec_qp_ctx *qp_ctx; + + struct sec_cipher_req c_req; + + int err_type; + int req_id; + + /* Status of the SEC request */ + bool fake_busy; +}; + +/** + * struct sec_req_op - Operations for SEC request + * @buf_map: DMA map the SGL buffers of the request + * @buf_unmap: DMA unmap the SGL buffers of the request + * @bd_fill: Fill the SEC queue BD + * @bd_send: Send the SEC BD into the hardware queue + * @callback: Call back for the request + * @process: Main processing logic of Skcipher + */ +struct sec_req_op { + int (*buf_map)(struct sec_ctx *ctx, struct sec_req *req); + void (*buf_unmap)(struct sec_ctx *ctx, struct sec_req *req); + void (*do_transfer)(struct sec_ctx *ctx, struct sec_req *req); + int (*bd_fill)(struct sec_ctx *ctx, struct sec_req *req); + int (*bd_send)(struct sec_ctx *ctx, struct sec_req *req); + void (*callback)(struct sec_ctx *ctx, struct sec_req *req, int err); + int (*process)(struct sec_ctx *ctx, struct sec_req *req); +}; + +/* SEC cipher context which cipher's relatives */ +struct sec_cipher_ctx { + u8 *c_key; + dma_addr_t c_key_dma; + sector_t iv_offset; + u32 c_gran_size; + u32 ivsize; + u8 c_mode; + u8 c_alg; + u8 c_key_len; +}; -#undef pr_fmt -#define pr_fmt(fmt) "hisi_sec: " fmt +/* SEC queue context which defines queue's relatives */ +struct sec_qp_ctx { + struct hisi_qp *qp; + struct sec_req *req_list[QM_Q_DEPTH]; + struct idr req_idr; + struct sec_alg_res res[QM_Q_DEPTH]; + struct sec_ctx *ctx; + struct mutex req_lock; + struct hisi_acc_sgl_pool *c_in_pool; + struct hisi_acc_sgl_pool *c_out_pool; + atomic_t pending_reqs; +}; +enum sec_alg_type { + SEC_SKCIPHER, + SEC_AEAD +}; + +/* SEC Crypto TFM context which defines queue and cipher .etc relatives */ +struct sec_ctx { + struct sec_qp_ctx *qp_ctx; + struct sec_dev *sec; + const struct sec_req_op *req_op; + struct hisi_qp **qps; + + /* Half queues for encipher, and half for decipher */ + u32 hlf_q_num; + + /* Threshold for fake busy, trigger to return -EBUSY to user */ + u32 fake_req_limit; + + /* Currrent cyclic index to select a queue for encipher */ + atomic_t enc_qcyclic; + + /* Currrent cyclic index to select a queue for decipher */ + atomic_t dec_qcyclic; -#define FUSION_LIMIT_DEF 1 -#define FUSION_LIMIT_MAX 64 -#define FUSION_TMOUT_NSEC_DEF (400 * 1000) + enum sec_alg_type alg_type; + bool pbuf_supported; + bool use_pbuf; + struct sec_cipher_ctx c_ctx; +}; enum sec_endian { SEC_LE = 0, @@ -21,32 +126,37 @@ enum sec_endian { SEC_64BE }; -struct hisi_sec_ctrl; +enum sec_debug_file_index { + SEC_CURRENT_QM, + SEC_CLEAR_ENABLE, + SEC_DEBUG_FILE_NUM, +}; + +struct sec_debug_file { + enum sec_debug_file_index index; + spinlock_t lock; + struct hisi_qm *qm; +}; -struct hisi_sec_dfx { - u64 send_cnt; - u64 send_by_tmout; - u64 send_by_full; - u64 recv_cnt; - u64 get_task_cnt; - u64 put_task_cnt; - u64 gran_task_cnt; - u64 thread_cnt; - u64 fake_busy_cnt; - u64 busy_comp_cnt; +struct sec_dfx { + atomic64_t send_cnt; + atomic64_t recv_cnt; }; -struct hisi_sec { +struct sec_debug { + struct sec_dfx dfx; + struct sec_debug_file files[SEC_DEBUG_FILE_NUM]; +}; + +struct sec_dev { struct hisi_qm qm; - struct hisi_sec_dfx sec_dfx; - struct hisi_sec_ctrl *ctrl; - int ctx_q_num; - int fusion_limit; - int fusion_tmout_nsec; + struct sec_debug debug; + u32 ctx_q_num; + bool iommu_used; }; void sec_destroy_qps(struct hisi_qp **qps, int qp_num); struct hisi_qp **sec_create_qps(void); -struct hisi_sec *find_sec_device(int node); - +int sec_register_to_crypto(void); +void sec_unregister_from_crypto(void); #endif diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c index 0643955..52448d0 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.c +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c @@ -1,384 +1,329 @@ // SPDX-License-Identifier: GPL-2.0+ /* Copyright (c) 2018-2019 HiSilicon Limited. */ -#include <linux/crypto.h> -#include <linux/hrtimer.h> -#include <linux/dma-mapping.h> -#include <linux/ktime.h> - #include <crypto/aes.h> #include <crypto/algapi.h> #include <crypto/des.h> #include <crypto/skcipher.h> #include <crypto/xts.h> -#include <crypto/internal/skcipher.h> +#include <linux/crypto.h> +#include <linux/dma-mapping.h> +#include <linux/idr.h> #include "sec.h" #include "sec_crypto.h" -static atomic_t sec_active_devs; - -#define SEC_ASYNC - -#define SEC_INVLD_REQ_ID (-1) -#define SEC_PRIORITY 4001 -#define SEC_XTS_MIN_KEY_SIZE (2 * AES_MIN_KEY_SIZE) -#define SEC_XTS_MAX_KEY_SIZE (2 * AES_MAX_KEY_SIZE) -#define SEC_DES3_2KEY_SIZE (2 * DES_KEY_SIZE) -#define SEC_DES3_3KEY_SIZE (3 * DES_KEY_SIZE) - -#define BUF_MAP_PER_SGL 64 -#define SEC_FUSION_BD - -enum C_ALG { - C_ALG_DES = 0x0, - C_ALG_3DES = 0x1, - C_ALG_AES = 0x2, - C_ALG_SM4 = 0x3, -}; - -enum C_MODE { - C_MODE_ECB = 0x0, - C_MODE_CBC = 0x1, - C_MODE_CTR = 0x4, - C_MODE_CCM = 0x5, - C_MODE_GCM = 0x6, - C_MODE_XTS = 0x7, - C_MODE_CBC_CS = 0x9, -}; - -enum CKEY_LEN { - CKEY_LEN_128_BIT = 0x0, - CKEY_LEN_192_BIT = 0x1, - CKEY_LEN_256_BIT = 0x2, - CKEY_LEN_DES = 0x1, - CKEY_LEN_3DES_3KEY = 0x1, - CKEY_LEN_3DES_2KEY = 0x3, -}; - -enum SEC_BD_TYPE { - BD_TYPE1 = 0x1, - BD_TYPE2 = 0x2, -}; - -enum SEC_CIPHER_TYPE { - SEC_CIPHER_ENC = 0x1, - SEC_CIPHER_DEC = 0x2, -}; - -enum SEC_ADDR_TYPE { - PBUF = 0x0, - SGL = 0x1, - PRP = 0x2, -}; - -enum SEC_CI_GEN { - CI_GEN_BY_ADDR = 0x0, - CI_GEN_BY_LBA = 0X3, -}; - -enum SEC_SCENE { - SCENE_IPSEC = 0x0, - SCENE_STORAGE = 0x5, -}; - -enum { - SEC_NO_FUSION = 0x0, - SEC_IV_FUSION = 0x1, - SEC_FUSION_BUTT -}; - -enum SEC_REQ_OPS_TYPE { - SEC_OPS_SKCIPHER_ALG = 0x0, - SEC_OPS_MULTI_IV = 0x1, - SEC_OPS_BUTT -}; - -struct cipher_res { - struct skcipher_request_ctx **sk_reqs; - u8 *c_ivin; - dma_addr_t c_ivin_dma; - struct scatterlist *src; - struct scatterlist *dst; -}; - -struct hisi_sec_cipher_req { - struct hisi_acc_hw_sgl *c_in; - dma_addr_t c_in_dma; - struct hisi_acc_hw_sgl *c_out; - dma_addr_t c_out_dma; - u8 *c_ivin; - dma_addr_t c_ivin_dma; - struct skcipher_request *sk_req; - struct scatterlist *src; - struct scatterlist *dst; - u32 c_len; - u32 gran_num; - u64 lba; - bool encrypt; -}; - -struct hisi_sec_ctx; -struct hisi_sec_qp_ctx; - -struct hisi_sec_req { - struct hisi_sec_sqe sec_sqe; - struct hisi_sec_ctx *ctx; - struct hisi_sec_qp_ctx *qp_ctx; - void **priv; - struct hisi_sec_cipher_req c_req; - ktime_t st_time; - int err_type; - int req_id; - int req_cnt; - int fusion_num; - int fake_busy; -}; +#define SEC_PRIORITY 4001 +#define SEC_XTS_MIN_KEY_SIZE (2 * AES_MIN_KEY_SIZE) +#define SEC_XTS_MAX_KEY_SIZE (2 * AES_MAX_KEY_SIZE) +#define SEC_DES3_2KEY_SIZE (2 * DES_KEY_SIZE) +#define SEC_DES3_3KEY_SIZE (3 * DES_KEY_SIZE) + +/* SEC sqe(bd) bit operational relative MACRO */ +#define SEC_DE_OFFSET 1 +#define SEC_CI_GEN_OFFSET 6 +#define SEC_CIPHER_OFFSET 4 +#define SEC_SCENE_OFFSET 3 +#define SEC_DST_SGL_OFFSET 2 +#define SEC_SRC_SGL_OFFSET 7 +#define SEC_CKEY_OFFSET 9 +#define SEC_CMODE_OFFSET 12 +#define SEC_AKEY_OFFSET 5 +#define SEC_AEAD_ALG_OFFSET 11 +#define SEC_AUTH_OFFSET 6 + +#define SEC_FLAG_OFFSET 7 +#define SEC_FLAG_MASK 0x0780 +#define SEC_TYPE_MASK 0x0F +#define SEC_DONE_MASK 0x0001 + +#define SEC_TOTAL_IV_SZ (SEC_IV_SIZE * QM_Q_DEPTH) +#define SEC_SGL_SGE_NR 128 +#define SEC_CTX_DEV(ctx) (&(ctx)->sec->qm.pdev->dev) +#define SEC_CIPHER_AUTH 0xfe +#define SEC_AUTH_CIPHER 0x1 +#define SEC_MAX_MAC_LEN 64 +#define SEC_MAX_AAD_LEN 65535 +#define SEC_TOTAL_MAC_SZ (SEC_MAX_MAC_LEN * QM_Q_DEPTH) + +#define SEC_PBUF_SZ 512 +#define SEC_PBUF_IV_OFFSET SEC_PBUF_SZ +#define SEC_PBUF_MAC_OFFSET (SEC_PBUF_SZ + SEC_IV_SIZE) +#define SEC_PBUF_PKG (SEC_PBUF_SZ + SEC_IV_SIZE + \ + SEC_MAX_MAC_LEN * 2) +#define SEC_PBUF_NUM (PAGE_SIZE / SEC_PBUF_PKG) +#define SEC_PBUF_PAGE_NUM (QM_Q_DEPTH / SEC_PBUF_NUM) +#define SEC_PBUF_LEFT_SZ (SEC_PBUF_PKG * (QM_Q_DEPTH - \ + SEC_PBUF_PAGE_NUM * SEC_PBUF_NUM)) +#define SEC_TOTAL_PBUF_SZ (PAGE_SIZE * SEC_PBUF_PAGE_NUM + \ + SEC_PBUF_LEFT_SZ) + +#define SEC_SQE_LEN_RATE 4 +#define SEC_SQE_CFLAG 2 +#define SEC_SQE_AEAD_FLAG 3 +#define SEC_SQE_DONE 0x1 -struct hisi_sec_req_op { - int fusion_type; - int (*get_res)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*queue_alloc)(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx); - int (*queue_free)(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx); - int (*buf_map)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*buf_unmap)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*do_transfer)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*bd_fill)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*bd_send)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); - int (*callback)(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req); -}; - -struct hisi_sec_cipher_ctx { - u8 *c_key; - dma_addr_t c_key_dma; - sector_t iv_offset; - u32 c_gran_size; - u8 c_mode; - u8 c_alg; - u8 c_key_len; -}; - -struct hisi_sec_qp_ctx { - struct hisi_qp *qp; - struct hisi_sec_req **req_list; - struct hisi_sec_req *fusion_req; - unsigned long *req_bitmap; - void *priv_req_res; - struct hisi_sec_ctx *ctx; - struct mutex req_lock; - atomic_t req_cnt; - struct hisi_sec_sqe *sqe_list; - struct hisi_acc_sgl_pool *c_in_pool; - struct hisi_acc_sgl_pool *c_out_pool; - int fusion_num; - int fusion_limit; -}; +static atomic_t sec_active_devs; -struct hisi_sec_ctx { - struct hisi_sec_qp_ctx *qp_ctx; - struct hisi_sec *sec; - struct device *dev; - struct hisi_sec_req_op *req_op; - struct hisi_qp **qps; - struct hrtimer timer; - struct work_struct work; - atomic_t thread_cnt; - int req_fake_limit; - int req_limit; - int q_num; - int enc_q_num; - atomic_t enc_qid; - atomic_t dec_qid; - struct hisi_sec_cipher_ctx c_ctx; - int fusion_tmout_nsec; - int fusion_limit; - u64 enc_fusion_num; - u64 dec_fusion_num; - bool is_fusion; -}; +/* Get an en/de-cipher queue cyclically to balance load over queues of TFM */ +static inline int sec_alloc_queue_id(struct sec_ctx *ctx, struct sec_req *req) +{ + if (req->c_req.encrypt) + return atomic_inc_return(&ctx->enc_qcyclic) % ctx->hlf_q_num; -#define DES_WEAK_KEY_NUM 4 -u64 des_weak_key[DES_WEAK_KEY_NUM] = {0x0101010101010101, 0xFEFEFEFEFEFEFEFE, - 0xE0E0E0E0F1F1F1F1, 0x1F1F1F1F0E0E0E0E}; + return atomic_inc_return(&ctx->dec_qcyclic) % ctx->hlf_q_num + + ctx->hlf_q_num; +} -static void hisi_sec_req_cb(struct hisi_qp *qp, void *); +static inline void sec_free_queue_id(struct sec_ctx *ctx, struct sec_req *req) +{ + if (req->c_req.encrypt) + atomic_dec(&ctx->enc_qcyclic); + else + atomic_dec(&ctx->dec_qcyclic); +} -static int hisi_sec_alloc_req_id(struct hisi_sec_req *req, - struct hisi_sec_qp_ctx *qp_ctx) +static int sec_alloc_req_id(struct sec_req *req, struct sec_qp_ctx *qp_ctx) { - struct hisi_sec_ctx *ctx = req->ctx; int req_id; - req_id = find_first_zero_bit(qp_ctx->req_bitmap, ctx->req_limit); - if (req_id >= ctx->req_limit || req_id < 0) { - dev_err(ctx->dev, "no free req id\n"); - return -ENOBUFS; + mutex_lock(&qp_ctx->req_lock); + + req_id = idr_alloc_cyclic(&qp_ctx->req_idr, NULL, + 0, QM_Q_DEPTH, GFP_ATOMIC); + mutex_unlock(&qp_ctx->req_lock); + if (unlikely(req_id < 0)) { + dev_err(SEC_CTX_DEV(req->ctx), "alloc req id fail!\n"); + return req_id; } - set_bit(req_id, qp_ctx->req_bitmap); - qp_ctx->req_list[req_id] = req; - req->req_id = req_id; req->qp_ctx = qp_ctx; - - return 0; + qp_ctx->req_list[req_id] = req; + return req_id; } -static void hisi_sec_free_req_id(struct hisi_sec_qp_ctx *qp_ctx, int req_id) +static void sec_free_req_id(struct sec_req *req) { - if (req_id < 0 || req_id >= qp_ctx->ctx->req_limit) { - pr_err("invalid req_id[%d]\n", req_id); + struct sec_qp_ctx *qp_ctx = req->qp_ctx; + int req_id = req->req_id; + + if (unlikely(req_id < 0 || req_id >= QM_Q_DEPTH)) { + dev_err(SEC_CTX_DEV(req->ctx), "free request id invalid!\n"); return; } qp_ctx->req_list[req_id] = NULL; + req->qp_ctx = NULL; mutex_lock(&qp_ctx->req_lock); - clear_bit(req_id, qp_ctx->req_bitmap); - atomic_dec(&qp_ctx->req_cnt); + idr_remove(&qp_ctx->req_idr, req_id); mutex_unlock(&qp_ctx->req_lock); } -static int sec_request_transfer(struct hisi_sec_ctx *, struct hisi_sec_req *); -static int sec_request_send(struct hisi_sec_ctx *, struct hisi_sec_req *); - -void qp_ctx_work_process(struct hisi_sec_qp_ctx *qp_ctx) +static void sec_req_cb(struct hisi_qp *qp, void *resp) { - struct hisi_sec_req *req; - struct hisi_sec_ctx *ctx; - ktime_t cur_time = ktime_get(); - int ret; - - mutex_lock(&qp_ctx->req_lock); - - req = qp_ctx->fusion_req; - if (req == NULL) { - mutex_unlock(&qp_ctx->req_lock); + struct sec_qp_ctx *qp_ctx = qp->qp_ctx; + struct sec_sqe *bd = resp; + struct sec_ctx *ctx; + struct sec_req *req; + u16 done, flag; + int err = 0; + u8 type; + + type = bd->type_cipher_auth & SEC_TYPE_MASK; + if (unlikely(type != SEC_BD_TYPE2)) { + pr_err("err bd type [%d]\n", type); return; } - ctx = req->ctx; - if (ctx == NULL || req->fusion_num == qp_ctx->fusion_limit) { - mutex_unlock(&qp_ctx->req_lock); + req = qp_ctx->req_list[le16_to_cpu(bd->type2.tag)]; + if (unlikely(!req)) { + atomic_inc(&qp->qp_status.used); return; } - if (cur_time - qp_ctx->fusion_req->st_time < ctx->fusion_tmout_nsec) { - mutex_unlock(&qp_ctx->req_lock); - return; + req->err_type = bd->type2.error_type; + ctx = req->ctx; + done = le16_to_cpu(bd->type2.done_flag) & SEC_DONE_MASK; + flag = (le16_to_cpu(bd->type2.done_flag) & + SEC_FLAG_MASK) >> SEC_FLAG_OFFSET; + if (unlikely(req->err_type || done != SEC_SQE_DONE || + (ctx->alg_type == SEC_SKCIPHER && flag != SEC_SQE_CFLAG))) { + dev_err_ratelimited(SEC_CTX_DEV(ctx), + "err_type[%d],done[%d],flag[%d]\n", + req->err_type, done, flag); + err = -EIO; } - qp_ctx->fusion_req = NULL; + atomic64_inc(&ctx->sec->debug.dfx.recv_cnt); + + ctx->req_op->buf_unmap(ctx, req); + + ctx->req_op->callback(ctx, req, err); +} + +static int sec_bd_send(struct sec_ctx *ctx, struct sec_req *req) +{ + struct sec_qp_ctx *qp_ctx = req->qp_ctx; + int ret; + mutex_lock(&qp_ctx->req_lock); + ret = hisi_qp_send(qp_ctx->qp, &req->sec_sqe); mutex_unlock(&qp_ctx->req_lock); + atomic64_inc(&ctx->sec->debug.dfx.send_cnt); - ret = sec_request_transfer(ctx, req); - if (ret) - goto err_free_req; - - ret = sec_request_send(ctx, req); - __sync_add_and_fetch(&ctx->sec->sec_dfx.send_by_tmout, 1); - if (ret != -EBUSY && ret != -EINPROGRESS) { - dev_err(ctx->dev, "[%s][%d] ret[%d]\n", __func__, - __LINE__, ret); - goto err_unmap_req; - } + if (unlikely(ret == -EBUSY)) + return -ENOBUFS; - return; + if (!ret) { + if (req->fake_busy) + ret = -EBUSY; + else + ret = -EINPROGRESS; + } -err_unmap_req: - ctx->req_op->buf_unmap(ctx, req); -err_free_req: - hisi_sec_free_req_id(qp_ctx, req->req_id); - atomic_dec(&ctx->thread_cnt); + return ret; } -void ctx_work_process(struct work_struct *work) +/* Get DMA memory resources */ +static int sec_alloc_civ_resource(struct device *dev, struct sec_alg_res *res) { - struct hisi_sec_ctx *ctx; int i; - ctx = container_of(work, struct hisi_sec_ctx, work); - for (i = 0; i < ctx->q_num; i++) - qp_ctx_work_process(&ctx->qp_ctx[i]); + res->c_ivin = dma_alloc_coherent(dev, SEC_TOTAL_IV_SZ, + &res->c_ivin_dma, GFP_KERNEL); + if (!res->c_ivin) + return -ENOMEM; + + for (i = 1; i < QM_Q_DEPTH; i++) { + res[i].c_ivin_dma = res->c_ivin_dma + i * SEC_IV_SIZE; + res[i].c_ivin = res->c_ivin + i * SEC_IV_SIZE; + } + + return 0; } -static enum hrtimer_restart hrtimer_handler(struct hrtimer *timer) +static void sec_free_civ_resource(struct device *dev, struct sec_alg_res *res) { - struct hisi_sec_ctx *ctx; - ktime_t tim; + if (res->c_ivin) + dma_free_coherent(dev, SEC_TOTAL_IV_SZ, + res->c_ivin, res->c_ivin_dma); +} - ctx = container_of(timer, struct hisi_sec_ctx, timer); - tim = ktime_set(0, ctx->fusion_tmout_nsec); +static void sec_free_pbuf_resource(struct device *dev, struct sec_alg_res *res) +{ + if (res->pbuf) + dma_free_coherent(dev, SEC_TOTAL_PBUF_SZ, + res->pbuf, res->pbuf_dma); +} - if (ctx->sec->qm.wq) - queue_work(ctx->sec->qm.wq, &ctx->work); - else - schedule_work(&ctx->work); +/* + * To improve performance, pbuffer is used for + * small packets (< 576Bytes) as IOMMU translation using. + */ +static int sec_alloc_pbuf_resource(struct device *dev, struct sec_alg_res *res) +{ + int pbuf_page_offset; + int i, j, k; - hrtimer_forward(timer, timer->base->get_time(), tim); + res->pbuf = dma_alloc_coherent(dev, SEC_TOTAL_PBUF_SZ, &res->pbuf_dma, + GFP_KERNEL); + if (!res->pbuf) + return -ENOMEM; - return HRTIMER_RESTART; + /* + * SEC_PBUF_PKG contains data pbuf, iv and + * out_mac : <SEC_PBUF|SEC_IV|SEC_MAC> + * Every PAGE contains six SEC_PBUF_PKG + * The sec_qp_ctx contains QM_Q_DEPTH numbers of SEC_PBUF_PKG + * So we need SEC_PBUF_PAGE_NUM numbers of PAGE + * for the SEC_TOTAL_PBUF_SZ + */ + for (i = 0; i <= SEC_PBUF_PAGE_NUM; i++) { + pbuf_page_offset = PAGE_SIZE * i; + for (j = 0; j < SEC_PBUF_NUM; j++) { + k = i * SEC_PBUF_NUM + j; + if (k == QM_Q_DEPTH) + break; + res[k].pbuf = res->pbuf + + j * SEC_PBUF_PKG + pbuf_page_offset; + res[k].pbuf_dma = res->pbuf_dma + + j * SEC_PBUF_PKG + pbuf_page_offset; + } + } + return 0; } -static int hisi_sec_create_qp_ctx(struct hisi_sec_ctx *ctx, - int qp_ctx_id, int req_type) +static int sec_alg_resource_alloc(struct sec_ctx *ctx, + struct sec_qp_ctx *qp_ctx) { - struct hisi_sec_qp_ctx *qp_ctx; - struct device *dev = ctx->dev; - struct hisi_qp *qp; + struct device *dev = SEC_CTX_DEV(ctx); + struct sec_alg_res *res = qp_ctx->res; int ret; + ret = sec_alloc_civ_resource(dev, res); + if (ret) + return ret; + + if (ctx->pbuf_supported) { + ret = sec_alloc_pbuf_resource(dev, res); + if (ret) { + dev_err(dev, "fail to alloc pbuf dma resource!\n"); + goto alloc_fail; + } + } + return 0; +alloc_fail: + sec_free_civ_resource(dev, res); + + return ret; +} + +static void sec_alg_resource_free(struct sec_ctx *ctx, + struct sec_qp_ctx *qp_ctx) +{ + struct device *dev = SEC_CTX_DEV(ctx); + + sec_free_civ_resource(dev, qp_ctx->res); + + if (ctx->pbuf_supported) + sec_free_pbuf_resource(dev, qp_ctx->res); +} + +static int sec_create_qp_ctx(struct sec_ctx *ctx, int qp_ctx_id, int alg_type) +{ + struct device *dev = SEC_CTX_DEV(ctx); + struct sec_qp_ctx *qp_ctx; + struct hisi_qp *qp; + int ret = -ENOMEM; + qp_ctx = &ctx->qp_ctx[qp_ctx_id]; qp = ctx->qps[qp_ctx_id]; - qp->req_type = req_type; + qp->req_type = 0; qp->qp_ctx = qp_ctx; -#ifdef SEC_ASYNC - qp->req_cb = hisi_sec_req_cb; -#endif + qp->req_cb = sec_req_cb; qp_ctx->qp = qp; - qp_ctx->fusion_num = 0; - qp_ctx->fusion_req = NULL; - qp_ctx->fusion_limit = ctx->fusion_limit; qp_ctx->ctx = ctx; mutex_init(&qp_ctx->req_lock); - atomic_set(&qp_ctx->req_cnt, 0); - - qp_ctx->req_bitmap = kcalloc(BITS_TO_LONGS(QM_Q_DEPTH), sizeof(long), - GFP_ATOMIC); - if (!qp_ctx->req_bitmap) - return -ENOMEM; - - qp_ctx->req_list = kcalloc(QM_Q_DEPTH, sizeof(void *), GFP_ATOMIC); - if (!qp_ctx->req_list) { - ret = -ENOMEM; - goto err_free_req_bitmap; - } - - qp_ctx->sqe_list = kcalloc(ctx->fusion_limit, - sizeof(struct hisi_sec_sqe), GFP_KERNEL); - if (!qp_ctx->sqe_list) { - ret = -ENOMEM; - goto err_free_req_list; - } + atomic_set(&qp_ctx->pending_reqs, 0); + idr_init(&qp_ctx->req_idr); qp_ctx->c_in_pool = hisi_acc_create_sgl_pool(dev, QM_Q_DEPTH, - FUSION_LIMIT_MAX); + SEC_SGL_SGE_NR); if (IS_ERR(qp_ctx->c_in_pool)) { - ret = PTR_ERR(qp_ctx->c_in_pool); - goto err_free_sqe_list; + dev_err(dev, "fail to create sgl pool for input!\n"); + goto err_destroy_idr; } qp_ctx->c_out_pool = hisi_acc_create_sgl_pool(dev, QM_Q_DEPTH, - FUSION_LIMIT_MAX); + SEC_SGL_SGE_NR); if (IS_ERR(qp_ctx->c_out_pool)) { - ret = PTR_ERR(qp_ctx->c_out_pool); + dev_err(dev, "fail to create sgl pool for output!\n"); goto err_free_c_in_pool; } - ret = ctx->req_op->queue_alloc(ctx, qp_ctx); + ret = sec_alg_resource_alloc(ctx, qp_ctx); if (ret) goto err_free_c_out_pool; @@ -389,304 +334,153 @@ static int hisi_sec_create_qp_ctx(struct hisi_sec_ctx *ctx, return 0; err_queue_free: - ctx->req_op->queue_free(ctx, qp_ctx); + sec_alg_resource_free(ctx, qp_ctx); err_free_c_out_pool: hisi_acc_free_sgl_pool(dev, qp_ctx->c_out_pool); err_free_c_in_pool: hisi_acc_free_sgl_pool(dev, qp_ctx->c_in_pool); -err_free_sqe_list: - kfree(qp_ctx->sqe_list); -err_free_req_list: - kfree(qp_ctx->req_list); -err_free_req_bitmap: - kfree(qp_ctx->req_bitmap); +err_destroy_idr: + idr_destroy(&qp_ctx->req_idr); return ret; } -static void hisi_sec_release_qp_ctx(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx) +static void sec_release_qp_ctx(struct sec_ctx *ctx, + struct sec_qp_ctx *qp_ctx) { - struct device *dev = ctx->dev; + struct device *dev = SEC_CTX_DEV(ctx); hisi_qm_stop_qp(qp_ctx->qp); - ctx->req_op->queue_free(ctx, qp_ctx); + sec_alg_resource_free(ctx, qp_ctx); + hisi_acc_free_sgl_pool(dev, qp_ctx->c_out_pool); hisi_acc_free_sgl_pool(dev, qp_ctx->c_in_pool); - kfree(qp_ctx->req_bitmap); - kfree(qp_ctx->req_list); - kfree(qp_ctx->sqe_list); -} - -static int __hisi_sec_ctx_init(struct hisi_sec_ctx *ctx, int qlen) -{ - if (!ctx || qlen < 0) - return -EINVAL; - - ctx->req_limit = qlen; - ctx->req_fake_limit = qlen / 2; - atomic_set(&ctx->thread_cnt, 0); - atomic_set(&ctx->enc_qid, 0); - atomic_set(&ctx->dec_qid, ctx->enc_q_num); - if (ctx->fusion_limit > 1 && ctx->fusion_tmout_nsec > 0) { - ktime_t tim = ktime_set(0, ctx->fusion_tmout_nsec); - - hrtimer_init(&ctx->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); - ctx->timer.function = hrtimer_handler; - hrtimer_start(&ctx->timer, tim, HRTIMER_MODE_REL); - INIT_WORK(&ctx->work, ctx_work_process); - } - - return 0; -} - -static void hisi_sec_get_fusion_param(struct hisi_sec_ctx *ctx, - struct hisi_sec *sec) -{ - if (ctx->is_fusion) { - ctx->fusion_tmout_nsec = sec->fusion_tmout_nsec; - ctx->fusion_limit = sec->fusion_limit; - } else { - ctx->fusion_tmout_nsec = 0; - ctx->fusion_limit = 1; - } + idr_destroy(&qp_ctx->req_idr); } -static int hisi_sec_cipher_ctx_init(struct crypto_skcipher *tfm) +static int sec_ctx_base_init(struct sec_ctx *ctx) { - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); - struct hisi_sec_cipher_ctx *c_ctx; - struct hisi_sec *sec; + struct sec_dev *sec; int i, ret; - crypto_skcipher_set_reqsize(tfm, sizeof(struct hisi_sec_req)); - ctx->qps = sec_create_qps(); if (!ctx->qps) { pr_err("Can not create sec qps!\n"); return -ENODEV; } - sec = container_of(ctx->qps[0]->qm, struct hisi_sec, qm); + sec = container_of(ctx->qps[0]->qm, struct sec_dev, qm); ctx->sec = sec; + ctx->hlf_q_num = sec->ctx_q_num >> 1; - ctx->dev = &sec->qm.pdev->dev; - - ctx->q_num = sec->ctx_q_num; - - ctx->enc_q_num = ctx->q_num / 2; - ctx->qp_ctx = kcalloc(ctx->q_num, sizeof(struct hisi_sec_qp_ctx), - GFP_KERNEL); - if (!ctx->qp_ctx) { - dev_err(ctx->dev, "failed to alloc qp_ctx"); + if (ctx->sec->iommu_used) + ctx->pbuf_supported = true; + else + ctx->pbuf_supported = false; + ctx->use_pbuf = false; + + /* Half of queue depth is taken as fake requests limit in the queue. */ + ctx->fake_req_limit = QM_Q_DEPTH >> 1; + ctx->qp_ctx = kcalloc(sec->ctx_q_num, sizeof(struct sec_qp_ctx), + GFP_KERNEL); + if (!ctx->qp_ctx) return -ENOMEM; - } - - hisi_sec_get_fusion_param(ctx, sec); - for (i = 0; i < ctx->q_num; i++) { - ret = hisi_sec_create_qp_ctx(ctx, i, 0); + for (i = 0; i < sec->ctx_q_num; i++) { + ret = sec_create_qp_ctx(ctx, i, 0); if (ret) goto err_sec_release_qp_ctx; } - - c_ctx = &ctx->c_ctx; - c_ctx->c_key = dma_alloc_coherent(ctx->dev, - SEC_MAX_KEY_SIZE, &c_ctx->c_key_dma, GFP_KERNEL); - - if (!ctx->c_ctx.c_key) { - ret = -ENOMEM; - goto err_sec_release_qp_ctx; - } - - return __hisi_sec_ctx_init(ctx, QM_Q_DEPTH); - + return 0; err_sec_release_qp_ctx: for (i = i - 1; i >= 0; i--) - hisi_sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); + sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); sec_destroy_qps(ctx->qps, sec->ctx_q_num); kfree(ctx->qp_ctx); + return ret; } -static void hisi_sec_cipher_ctx_exit(struct crypto_skcipher *tfm) +static void sec_ctx_base_uninit(struct sec_ctx *ctx) { - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); - struct hisi_sec_cipher_ctx *c_ctx; - int i = 0; - - c_ctx = &ctx->c_ctx; - - if (ctx->fusion_limit > 1 && ctx->fusion_tmout_nsec > 0) - hrtimer_cancel(&ctx->timer); - - if (c_ctx->c_key) { - memzero_explicit(c_ctx->c_key, SEC_MAX_KEY_SIZE); - dma_free_coherent(ctx->dev, SEC_MAX_KEY_SIZE, c_ctx->c_key, - c_ctx->c_key_dma); - c_ctx->c_key = NULL; - } + int i; - for (i = 0; i < ctx->q_num; i++) - hisi_sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); + for (i = 0; i < ctx->sec->ctx_q_num; i++) + sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); - sec_destroy_qps(ctx->qps, ctx->q_num); + sec_destroy_qps(ctx->qps, ctx->sec->ctx_q_num); kfree(ctx->qp_ctx); } -static int hisi_sec_skcipher_get_res(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_queue_alloc(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx); -static int hisi_sec_skcipher_queue_free(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx); -static int hisi_sec_skcipher_buf_map(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_buf_unmap(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_copy_iv(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_bd_fill_base(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_bd_fill_storage(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_bd_fill_multi_iv(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_bd_send_asyn(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); -static int hisi_sec_skcipher_callback(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req); - -struct hisi_sec_req_op sec_req_ops_tbl[] = { - { - .fusion_type = SEC_NO_FUSION, - .get_res = hisi_sec_skcipher_get_res, - .queue_alloc = hisi_sec_skcipher_queue_alloc, - .queue_free = hisi_sec_skcipher_queue_free, - .buf_map = hisi_sec_skcipher_buf_map, - .buf_unmap = hisi_sec_skcipher_buf_unmap, - .do_transfer = hisi_sec_skcipher_copy_iv, - .bd_fill = hisi_sec_skcipher_bd_fill_base, - .bd_send = hisi_sec_bd_send_asyn, - .callback = hisi_sec_skcipher_callback, - }, { - .fusion_type = SEC_IV_FUSION, - .get_res = hisi_sec_skcipher_get_res, - .queue_alloc = hisi_sec_skcipher_queue_alloc, - .queue_free = hisi_sec_skcipher_queue_free, - .buf_map = hisi_sec_skcipher_buf_map, - .buf_unmap = hisi_sec_skcipher_buf_unmap, - .do_transfer = hisi_sec_skcipher_copy_iv, - .bd_fill = hisi_sec_skcipher_bd_fill_multi_iv, - .bd_send = hisi_sec_bd_send_asyn, - .callback = hisi_sec_skcipher_callback, - } -}; - -static int hisi_sec_cipher_ctx_init_alg(struct crypto_skcipher *tfm) +static int sec_cipher_init(struct sec_ctx *ctx) { - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); + struct sec_cipher_ctx *c_ctx = &ctx->c_ctx; - ctx->req_op = &sec_req_ops_tbl[SEC_OPS_SKCIPHER_ALG]; - ctx->is_fusion = ctx->req_op->fusion_type; + c_ctx->c_key = dma_alloc_coherent(SEC_CTX_DEV(ctx), SEC_MAX_KEY_SIZE, + &c_ctx->c_key_dma, GFP_KERNEL); + if (!c_ctx->c_key) + return -ENOMEM; - return hisi_sec_cipher_ctx_init(tfm); + return 0; } -static int hisi_sec_cipher_ctx_init_multi_iv(struct crypto_skcipher *tfm) +static void sec_cipher_uninit(struct sec_ctx *ctx) { - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); - - ctx->req_op = &sec_req_ops_tbl[SEC_OPS_MULTI_IV]; - ctx->is_fusion = ctx->req_op->fusion_type; + struct sec_cipher_ctx *c_ctx = &ctx->c_ctx; - return hisi_sec_cipher_ctx_init(tfm); + memzero_explicit(c_ctx->c_key, SEC_MAX_KEY_SIZE); + dma_free_coherent(SEC_CTX_DEV(ctx), SEC_MAX_KEY_SIZE, + c_ctx->c_key, c_ctx->c_key_dma); } -static void hisi_sec_req_cb(struct hisi_qp *qp, void *resp) +static int sec_skcipher_init(struct crypto_skcipher *tfm) { - struct hisi_sec_sqe *sec_sqe = (struct hisi_sec_sqe *)resp; - struct hisi_sec_qp_ctx *qp_ctx = qp->qp_ctx; - struct device *dev = &qp->qm->pdev->dev; - struct hisi_sec_req *req; - struct hisi_sec_dfx *dfx; - u32 req_id; - - if (sec_sqe->type == 1) { - req_id = sec_sqe->type1.tag; - req = qp_ctx->req_list[req_id]; - - req->err_type = sec_sqe->type1.error_type; - if (req->err_type || sec_sqe->type1.done != 0x1 || - sec_sqe->type1.flag != 0x2) { - dev_err_ratelimited(dev, - "err_type[%d] done[%d] flag[%d]\n", - req->err_type, - sec_sqe->type1.done, - sec_sqe->type1.flag); - } - } else if (sec_sqe->type == 2) { - req_id = sec_sqe->type2.tag; - req = qp_ctx->req_list[req_id]; - - req->err_type = sec_sqe->type2.error_type; - if (req->err_type || sec_sqe->type2.done != 0x1 || - sec_sqe->type2.flag != 0x2) { - dev_err_ratelimited(dev, - "err_type[%d] done[%d] flag[%d]\n", - req->err_type, - sec_sqe->type2.done, - sec_sqe->type2.flag); - } - } else { - dev_err_ratelimited(dev, "err bd type [%d]\n", sec_sqe->type); - return; - } - - dfx = &req->ctx->sec->sec_dfx; - - req->ctx->req_op->buf_unmap(req->ctx, req); - req->ctx->req_op->callback(req->ctx, req); + struct sec_ctx *ctx = crypto_skcipher_ctx(tfm); + int ret; - __sync_add_and_fetch(&dfx->recv_cnt, 1); -} + ctx->alg_type = SEC_SKCIPHER; + crypto_skcipher_set_reqsize(tfm, sizeof(struct sec_req)); + ctx->c_ctx.ivsize = crypto_skcipher_ivsize(tfm); + if (ctx->c_ctx.ivsize > SEC_IV_SIZE) { + dev_err(SEC_CTX_DEV(ctx), "get error skcipher iv size!\n"); + return -EINVAL; + } -static int sec_des_weak_key(const u64 *key, const u32 keylen) -{ - int i; + ret = sec_ctx_base_init(ctx); + if (ret) + return ret; - for (i = 0; i < DES_WEAK_KEY_NUM; i++) - if (*key == des_weak_key[i]) - return 1; + ret = sec_cipher_init(ctx); + if (ret) + goto err_cipher_init; return 0; +err_cipher_init: + sec_ctx_base_uninit(ctx); + + return ret; } -static int sec_skcipher_des_setkey(struct hisi_sec_cipher_ctx *c_ctx, - const u32 keylen, const u8 *key) +static void sec_skcipher_uninit(struct crypto_skcipher *tfm) { - if (keylen != DES_KEY_SIZE) - return -EINVAL; - - if (sec_des_weak_key((const u64 *)key, keylen)) - return -EKEYREJECTED; - - c_ctx->c_key_len = CKEY_LEN_DES; + struct sec_ctx *ctx = crypto_skcipher_ctx(tfm); - return 0; + sec_cipher_uninit(ctx); + sec_ctx_base_uninit(ctx); } -static int sec_skcipher_3des_setkey(struct hisi_sec_cipher_ctx *c_ctx, - const u32 keylen, const enum C_MODE c_mode) +static int sec_skcipher_3des_setkey(struct sec_cipher_ctx *c_ctx, + const u32 keylen, + const enum sec_cmode c_mode) { switch (keylen) { case SEC_DES3_2KEY_SIZE: - c_ctx->c_key_len = CKEY_LEN_3DES_2KEY; + c_ctx->c_key_len = SEC_CKEY_3DES_2KEY; break; case SEC_DES3_3KEY_SIZE: - c_ctx->c_key_len = CKEY_LEN_3DES_3KEY; + c_ctx->c_key_len = SEC_CKEY_3DES_3KEY; break; default: return -EINVAL; @@ -695,32 +489,35 @@ static int sec_skcipher_3des_setkey(struct hisi_sec_cipher_ctx *c_ctx, return 0; } -static int sec_skcipher_aes_sm4_setkey(struct hisi_sec_cipher_ctx *c_ctx, - const u32 keylen, const enum C_MODE c_mode) +static int sec_skcipher_aes_sm4_setkey(struct sec_cipher_ctx *c_ctx, + const u32 keylen, + const enum sec_cmode c_mode) { - if (c_mode == C_MODE_XTS) { + if (c_mode == SEC_CMODE_XTS) { switch (keylen) { case SEC_XTS_MIN_KEY_SIZE: - c_ctx->c_key_len = CKEY_LEN_128_BIT; + c_ctx->c_key_len = SEC_CKEY_128BIT; break; case SEC_XTS_MAX_KEY_SIZE: - c_ctx->c_key_len = CKEY_LEN_256_BIT; + c_ctx->c_key_len = SEC_CKEY_256BIT; break; default: + pr_err("hisi_sec2: xts mode key error!\n"); return -EINVAL; } } else { switch (keylen) { case AES_KEYSIZE_128: - c_ctx->c_key_len = CKEY_LEN_128_BIT; + c_ctx->c_key_len = SEC_CKEY_128BIT; break; case AES_KEYSIZE_192: - c_ctx->c_key_len = CKEY_LEN_192_BIT; + c_ctx->c_key_len = SEC_CKEY_192BIT; break; case AES_KEYSIZE_256: - c_ctx->c_key_len = CKEY_LEN_256_BIT; + c_ctx->c_key_len = SEC_CKEY_256BIT; break; default: + pr_err("hisi_sec2: aes key error!\n"); return -EINVAL; } } @@ -729,38 +526,40 @@ static int sec_skcipher_aes_sm4_setkey(struct hisi_sec_cipher_ctx *c_ctx, } static int sec_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key, - const u32 keylen, const enum C_ALG c_alg, const enum C_MODE c_mode) + const u32 keylen, const enum sec_calg c_alg, + const enum sec_cmode c_mode) { - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); - struct hisi_sec_cipher_ctx *c_ctx = &ctx->c_ctx; + struct sec_ctx *ctx = crypto_skcipher_ctx(tfm); + struct sec_cipher_ctx *c_ctx = &ctx->c_ctx; int ret; - if (c_mode == C_MODE_XTS) { + if (c_mode == SEC_CMODE_XTS) { ret = xts_verify_key(tfm, key, keylen); - if (ret) + if (ret) { + dev_err(SEC_CTX_DEV(ctx), "xts mode key err!\n"); return ret; + } } c_ctx->c_alg = c_alg; c_ctx->c_mode = c_mode; switch (c_alg) { - case C_ALG_DES: - ret = sec_skcipher_des_setkey(c_ctx, keylen, key); - break; - case C_ALG_3DES: + case SEC_CALG_3DES: ret = sec_skcipher_3des_setkey(c_ctx, keylen, c_mode); break; - case C_ALG_AES: - case C_ALG_SM4: + case SEC_CALG_AES: + case SEC_CALG_SM4: ret = sec_skcipher_aes_sm4_setkey(c_ctx, keylen, c_mode); break; default: return -EINVAL; } - if (ret) + if (ret) { + dev_err(SEC_CTX_DEV(ctx), "set sec key err!\n"); return ret; + } memcpy(c_ctx->c_key, key, keylen); @@ -769,639 +568,423 @@ static int sec_skcipher_setkey(struct crypto_skcipher *tfm, const u8 *key, #define GEN_SEC_SETKEY_FUNC(name, c_alg, c_mode) \ static int sec_setkey_##name(struct crypto_skcipher *tfm, const u8 *key,\ - u32 keylen)\ + u32 keylen) \ { \ return sec_skcipher_setkey(tfm, key, keylen, c_alg, c_mode); \ } -GEN_SEC_SETKEY_FUNC(aes_ecb, C_ALG_AES, C_MODE_ECB) -GEN_SEC_SETKEY_FUNC(aes_cbc, C_ALG_AES, C_MODE_CBC) -GEN_SEC_SETKEY_FUNC(sm4_cbc, C_ALG_SM4, C_MODE_CBC) - -GEN_SEC_SETKEY_FUNC(des_ecb, C_ALG_DES, C_MODE_ECB) -GEN_SEC_SETKEY_FUNC(des_cbc, C_ALG_DES, C_MODE_CBC) -GEN_SEC_SETKEY_FUNC(3des_ecb, C_ALG_3DES, C_MODE_ECB) -GEN_SEC_SETKEY_FUNC(3des_cbc, C_ALG_3DES, C_MODE_CBC) - -GEN_SEC_SETKEY_FUNC(aes_xts, C_ALG_AES, C_MODE_XTS) -GEN_SEC_SETKEY_FUNC(sm4_xts, C_ALG_SM4, C_MODE_XTS) +GEN_SEC_SETKEY_FUNC(aes_ecb, SEC_CALG_AES, SEC_CMODE_ECB) +GEN_SEC_SETKEY_FUNC(aes_cbc, SEC_CALG_AES, SEC_CMODE_CBC) +GEN_SEC_SETKEY_FUNC(aes_xts, SEC_CALG_AES, SEC_CMODE_XTS) -static int hisi_sec_get_async_ret(int ret, int req_cnt, int req_fake_limit) -{ - if (ret == 0) { - if (req_cnt >= req_fake_limit) - ret = -EBUSY; - else - ret = -EINPROGRESS; - } else { - if (ret == -EBUSY) - ret = -ENOBUFS; - } +GEN_SEC_SETKEY_FUNC(3des_ecb, SEC_CALG_3DES, SEC_CMODE_ECB) +GEN_SEC_SETKEY_FUNC(3des_cbc, SEC_CALG_3DES, SEC_CMODE_CBC) - return ret; -} +GEN_SEC_SETKEY_FUNC(sm4_xts, SEC_CALG_SM4, SEC_CMODE_XTS) +GEN_SEC_SETKEY_FUNC(sm4_cbc, SEC_CALG_SM4, SEC_CMODE_CBC) -static int hisi_sec_skcipher_get_res(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static int sec_cipher_pbuf_map(struct sec_ctx *ctx, struct sec_req *req, + struct scatterlist *src) { - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct hisi_sec_qp_ctx *qp_ctx = req->qp_ctx; - struct cipher_res *c_res = (struct cipher_res *)qp_ctx->priv_req_res; + struct sec_cipher_req *c_req = &req->c_req; + struct sec_qp_ctx *qp_ctx = req->qp_ctx; + struct device *dev = SEC_CTX_DEV(ctx); + int copy_size, pbuf_length; int req_id = req->req_id; - c_req->c_ivin = c_res[req_id].c_ivin; - c_req->c_ivin_dma = c_res[req_id].c_ivin_dma; - req->priv = (void **)c_res[req_id].sk_reqs; - c_req->src = c_res[req_id].src; - c_req->dst = c_res[req_id].dst; - - return 0; -} - -static int hisi_sec_skcipher_queue_alloc(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx) -{ - struct cipher_res *c_res; - int req_num = ctx->fusion_limit; - int alloc_num = QM_Q_DEPTH * ctx->fusion_limit; - int buf_map_num = QM_Q_DEPTH * ctx->fusion_limit; - struct device *dev = ctx->dev; - int i, ret; - - c_res = kcalloc(QM_Q_DEPTH, sizeof(struct cipher_res), GFP_KERNEL); - if (!c_res) - return -ENOMEM; - - qp_ctx->priv_req_res = (void *)c_res; - - c_res[0].sk_reqs = kcalloc(alloc_num, - sizeof(struct skcipher_request_ctx *), GFP_KERNEL); - if (!c_res[0].sk_reqs) { - ret = -ENOMEM; - goto err_free_c_res; - } - - c_res[0].c_ivin = dma_alloc_coherent(dev, - SEC_IV_SIZE * alloc_num, &c_res[0].c_ivin_dma, GFP_KERNEL); - if (!c_res[0].c_ivin) { - ret = -ENOMEM; - goto err_free_sk_reqs; - } + copy_size = c_req->c_len; - c_res[0].src = kcalloc(buf_map_num, sizeof(struct scatterlist), - GFP_KERNEL); - if (!c_res[0].src) { - ret = -ENOMEM; - goto err_free_c_ivin; + pbuf_length = sg_copy_to_buffer(src, sg_nents(src), + qp_ctx->res[req_id].pbuf, copy_size); + if (unlikely(pbuf_length != copy_size)) { + dev_err(dev, "copy src data to pbuf error!\n"); + return -EINVAL; } - c_res[0].dst = kcalloc(buf_map_num, sizeof(struct scatterlist), - GFP_KERNEL); - if (!c_res[0].dst) { - ret = -ENOMEM; - goto err_free_src; + c_req->c_in_dma = qp_ctx->res[req_id].pbuf_dma; + if (!c_req->c_in_dma) { + dev_err(dev, "fail to set pbuffer address!\n"); + return -ENOMEM; } - for (i = 1; i < QM_Q_DEPTH; i++) { - c_res[i].sk_reqs = c_res[0].sk_reqs + i * req_num; - c_res[i].c_ivin = c_res[0].c_ivin - + i * req_num * SEC_IV_SIZE; - c_res[i].c_ivin_dma = c_res[0].c_ivin_dma - + i * req_num * SEC_IV_SIZE; - c_res[i].src = c_res[0].src + i * req_num; - c_res[i].dst = c_res[0].dst + i * req_num; - } + c_req->c_out_dma = c_req->c_in_dma; return 0; - -err_free_src: - kfree(c_res[0].src); -err_free_c_ivin: - dma_free_coherent(dev, SEC_IV_SIZE * alloc_num, c_res[0].c_ivin, - c_res[0].c_ivin_dma); -err_free_sk_reqs: - kfree(c_res[0].sk_reqs); -err_free_c_res: - kfree(c_res); - - return ret; } -static int hisi_sec_skcipher_queue_free(struct hisi_sec_ctx *ctx, - struct hisi_sec_qp_ctx *qp_ctx) +static void sec_cipher_pbuf_unmap(struct sec_ctx *ctx, struct sec_req *req, + struct scatterlist *dst) { - struct cipher_res *c_res = (struct cipher_res *)qp_ctx->priv_req_res; - struct device *dev = ctx->dev; - int alloc_num = QM_Q_DEPTH * ctx->fusion_limit; + struct sec_cipher_req *c_req = &req->c_req; + struct sec_qp_ctx *qp_ctx = req->qp_ctx; + struct device *dev = SEC_CTX_DEV(ctx); + int copy_size, pbuf_length; + int req_id = req->req_id; - kfree(c_res[0].dst); - kfree(c_res[0].src); - dma_free_coherent(dev, SEC_IV_SIZE * alloc_num, c_res[0].c_ivin, - c_res[0].c_ivin_dma); - kfree(c_res[0].sk_reqs); - kfree(c_res); + copy_size = c_req->c_len; - return 0; + pbuf_length = sg_copy_from_buffer(dst, sg_nents(dst), + qp_ctx->res[req_id].pbuf, copy_size); + if (unlikely(pbuf_length != copy_size)) + dev_err(dev, "copy pbuf data to dst error!\n"); } -static int hisi_sec_skcipher_buf_map(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static int sec_cipher_map(struct sec_ctx *ctx, struct sec_req *req, + struct scatterlist *src, struct scatterlist *dst) { - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct device *dev = ctx->dev; - struct skcipher_request *sk_next; - struct hisi_sec_qp_ctx *qp_ctx = req->qp_ctx; - int src_nents, src_nents_sum, copyed_src_nents; - int dst_nents, dst_nents_sum, copyed_dst_nents; - int i, ret, buf_map_limit; - - src_nents_sum = 0; - dst_nents_sum = 0; - for (i = 0; i < req->fusion_num; i++) { - sk_next = (struct skcipher_request *)req->priv[i]; - if (sk_next == NULL) { - dev_err(ctx->dev, "nullptr at [%d]\n", i); - return -EFAULT; - } - src_nents_sum += sg_nents(sk_next->src); - dst_nents_sum += sg_nents(sk_next->dst); - if (sk_next->src == sk_next->dst && i > 0) { - dev_err(ctx->dev, "err: src == dst\n"); - return -EFAULT; - } - } + struct sec_cipher_req *c_req = &req->c_req; + struct sec_qp_ctx *qp_ctx = req->qp_ctx; + struct device *dev = SEC_CTX_DEV(ctx); - buf_map_limit = FUSION_LIMIT_MAX; - if (src_nents_sum > buf_map_limit || dst_nents_sum > buf_map_limit) { - dev_err(ctx->dev, "src[%d] or dst[%d] bigger than %d\n", - src_nents_sum, dst_nents_sum, buf_map_limit); - return -ENOBUFS; - } - - copyed_src_nents = 0; - copyed_dst_nents = 0; - for (i = 0; i < req->fusion_num; i++) { - sk_next = (struct skcipher_request *)req->priv[i]; - src_nents = sg_nents(sk_next->src); - dst_nents = sg_nents(sk_next->dst); - - if (i != req->fusion_num - 1) { - sg_unmark_end(&sk_next->src[src_nents - 1]); - sg_unmark_end(&sk_next->dst[dst_nents - 1]); - } - - memcpy(c_req->src + copyed_src_nents, sk_next->src, - src_nents * sizeof(struct scatterlist)); - memcpy(c_req->dst + copyed_dst_nents, sk_next->dst, - dst_nents * sizeof(struct scatterlist)); + if (ctx->use_pbuf) + return sec_cipher_pbuf_map(ctx, req, src); - copyed_src_nents += src_nents; - copyed_dst_nents += dst_nents; - } - - c_req->c_in = hisi_acc_sg_buf_map_to_hw_sgl(dev, c_req->src, - qp_ctx->c_in_pool, req->req_id, &c_req->c_in_dma); + c_req->c_in = hisi_acc_sg_buf_map_to_hw_sgl(dev, src, + qp_ctx->c_in_pool, + req->req_id, + &c_req->c_in_dma); - if (IS_ERR(c_req->c_in)) + if (IS_ERR(c_req->c_in)) { + dev_err(dev, "fail to dma map input sgl buffers!\n"); return PTR_ERR(c_req->c_in); + } - if (c_req->dst == c_req->src) { + if (dst == src) { c_req->c_out = c_req->c_in; c_req->c_out_dma = c_req->c_in_dma; } else { - c_req->c_out = hisi_acc_sg_buf_map_to_hw_sgl(dev, c_req->dst, - qp_ctx->c_out_pool, req->req_id, &c_req->c_out_dma); + c_req->c_out = hisi_acc_sg_buf_map_to_hw_sgl(dev, dst, + qp_ctx->c_out_pool, + req->req_id, + &c_req->c_out_dma); + if (IS_ERR(c_req->c_out)) { - ret = PTR_ERR(c_req->c_out); - goto err_unmap_src; + dev_err(dev, "fail to dma map output sgl buffers!\n"); + hisi_acc_sg_buf_unmap(dev, src, c_req->c_in); + return PTR_ERR(c_req->c_out); } } return 0; - -err_unmap_src: - hisi_acc_sg_buf_unmap(dev, c_req->src, c_req->c_in); - - return ret; } -static int hisi_sec_skcipher_buf_unmap(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static void sec_cipher_unmap(struct sec_ctx *ctx, struct sec_req *req, + struct scatterlist *src, struct scatterlist *dst) { - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct device *dev = ctx->dev; - - if (c_req->dst != c_req->src) - hisi_acc_sg_buf_unmap(dev, c_req->src, c_req->c_in); + struct sec_cipher_req *c_req = &req->c_req; + struct device *dev = SEC_CTX_DEV(ctx); - hisi_acc_sg_buf_unmap(dev, c_req->dst, c_req->c_out); + if (ctx->use_pbuf) { + sec_cipher_pbuf_unmap(ctx, req, dst); + } else { + if (dst != src) + hisi_acc_sg_buf_unmap(dev, src, c_req->c_in); - return 0; + hisi_acc_sg_buf_unmap(dev, dst, c_req->c_out); + } } -static int hisi_sec_skcipher_copy_iv(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static int sec_skcipher_sgl_map(struct sec_ctx *ctx, struct sec_req *req) { - struct hisi_sec_cipher_ctx *c_ctx = &ctx->c_ctx; - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct skcipher_request *sk_req = - (struct skcipher_request *)req->priv[0]; - struct crypto_skcipher *atfm = crypto_skcipher_reqtfm(sk_req); - struct skcipher_request *sk_next; - int i, iv_size; - - c_req->c_len = sk_req->cryptlen; - - iv_size = crypto_skcipher_ivsize(atfm); - if (iv_size > SEC_IV_SIZE) - return -EINVAL; + struct skcipher_request *sq = req->c_req.sk_req; - memcpy(c_req->c_ivin, sk_req->iv, iv_size); - - if (ctx->is_fusion) { - for (i = 1; i < req->fusion_num; i++) { - sk_next = (struct skcipher_request *)req->priv[i]; - memcpy(c_req->c_ivin + i * iv_size, sk_next->iv, - iv_size); - } - - c_req->gran_num = req->fusion_num; - c_ctx->c_gran_size = sk_req->cryptlen; - } - - return 0; + return sec_cipher_map(ctx, req, sq->src, sq->dst); } -static int hisi_sec_skcipher_bd_fill_storage(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static void sec_skcipher_sgl_unmap(struct sec_ctx *ctx, struct sec_req *req) { - struct hisi_sec_cipher_ctx *c_ctx = &ctx->c_ctx; - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct hisi_sec_sqe *sec_sqe = &req->sec_sqe; + struct skcipher_request *sq = req->c_req.sk_req; - if (!c_req->c_len) - return -EINVAL; - - sec_sqe->type1.c_key_addr_l = lower_32_bits(c_ctx->c_key_dma); - sec_sqe->type1.c_key_addr_h = upper_32_bits(c_ctx->c_key_dma); - sec_sqe->type1.c_ivin_addr_l = lower_32_bits(c_req->c_ivin_dma); - sec_sqe->type1.c_ivin_addr_h = upper_32_bits(c_req->c_ivin_dma); - sec_sqe->type1.data_src_addr_l = lower_32_bits(c_req->c_in_dma); - sec_sqe->type1.data_src_addr_h = upper_32_bits(c_req->c_in_dma); - sec_sqe->type1.data_dst_addr_l = lower_32_bits(c_req->c_out_dma); - sec_sqe->type1.data_dst_addr_h = upper_32_bits(c_req->c_out_dma); - - sec_sqe->type1.c_mode = c_ctx->c_mode; - sec_sqe->type1.c_alg = c_ctx->c_alg; - sec_sqe->type1.c_key_len = c_ctx->c_key_len; - - sec_sqe->src_addr_type = SGL; - sec_sqe->dst_addr_type = SGL; - sec_sqe->type = BD_TYPE1; - sec_sqe->scene = SCENE_STORAGE; - sec_sqe->de = c_req->c_in_dma != c_req->c_out_dma; - - if (c_req->encrypt) - sec_sqe->cipher = SEC_CIPHER_ENC; - else - sec_sqe->cipher = SEC_CIPHER_DEC; - - if (c_ctx->c_mode == C_MODE_XTS) - sec_sqe->type1.ci_gen = CI_GEN_BY_LBA; - - sec_sqe->type1.cipher_gran_size = c_ctx->c_gran_size; - sec_sqe->type1.gran_num = c_req->gran_num; - __sync_fetch_and_add(&ctx->sec->sec_dfx.gran_task_cnt, c_req->gran_num); - sec_sqe->type1.block_size = c_req->c_len; - - sec_sqe->type1.lba_l = lower_32_bits(c_req->lba); - sec_sqe->type1.lba_h = upper_32_bits(c_req->lba); - - sec_sqe->type1.tag = req->req_id; - - return 0; + sec_cipher_unmap(ctx, req, sq->src, sq->dst); } -static int hisi_sec_skcipher_bd_fill_multi_iv(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static int sec_request_transfer(struct sec_ctx *ctx, struct sec_req *req) { int ret; - ret = hisi_sec_skcipher_bd_fill_storage(ctx, req); - if (ret) + ret = ctx->req_op->buf_map(ctx, req); + if (unlikely(ret)) return ret; - req->sec_sqe.type1.ci_gen = CI_GEN_BY_ADDR; - - return 0; -} - -static int hisi_sec_skcipher_bd_fill_base(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) -{ - struct hisi_sec_cipher_ctx *c_ctx = &ctx->c_ctx; - struct hisi_sec_cipher_req *c_req = &req->c_req; - struct hisi_sec_sqe *sec_sqe = &req->sec_sqe; - - if (!c_req->c_len) - return -EINVAL; - - sec_sqe->type2.c_key_addr_l = lower_32_bits(c_ctx->c_key_dma); - sec_sqe->type2.c_key_addr_h = upper_32_bits(c_ctx->c_key_dma); - sec_sqe->type2.c_ivin_addr_l = lower_32_bits(c_req->c_ivin_dma); - sec_sqe->type2.c_ivin_addr_h = upper_32_bits(c_req->c_ivin_dma); - sec_sqe->type2.data_src_addr_l = lower_32_bits(c_req->c_in_dma); - sec_sqe->type2.data_src_addr_h = upper_32_bits(c_req->c_in_dma); - sec_sqe->type2.data_dst_addr_l = lower_32_bits(c_req->c_out_dma); - sec_sqe->type2.data_dst_addr_h = upper_32_bits(c_req->c_out_dma); + ctx->req_op->do_transfer(ctx, req); - sec_sqe->type2.c_mode = c_ctx->c_mode; - sec_sqe->type2.c_alg = c_ctx->c_alg; - sec_sqe->type2.c_key_len = c_ctx->c_key_len; - - sec_sqe->src_addr_type = SGL; - sec_sqe->dst_addr_type = SGL; - sec_sqe->type = BD_TYPE2; - sec_sqe->scene = SCENE_IPSEC; - sec_sqe->de = c_req->c_in_dma != c_req->c_out_dma; + ret = ctx->req_op->bd_fill(ctx, req); + if (unlikely(ret)) + goto unmap_req_buf; - __sync_fetch_and_add(&ctx->sec->sec_dfx.gran_task_cnt, 1); + return ret; - if (c_req->encrypt) - sec_sqe->cipher = SEC_CIPHER_ENC; - else - sec_sqe->cipher = SEC_CIPHER_DEC; +unmap_req_buf: + ctx->req_op->buf_unmap(ctx, req); - sec_sqe->type2.c_len = c_req->c_len; - sec_sqe->type2.tag = req->req_id; + return ret; +} - return 0; +static void sec_request_untransfer(struct sec_ctx *ctx, struct sec_req *req) +{ + ctx->req_op->buf_unmap(ctx, req); } -static int hisi_sec_bd_send_asyn(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static void sec_skcipher_copy_iv(struct sec_ctx *ctx, struct sec_req *req) { - struct hisi_sec_qp_ctx *qp_ctx = req->qp_ctx; - int req_cnt = req->req_cnt; - int ret; + struct skcipher_request *sk_req = req->c_req.sk_req; + struct sec_cipher_req *c_req = &req->c_req; + struct sec_alg_res *res = &req->qp_ctx->res[req->req_id]; - mutex_lock(&qp_ctx->req_lock); - ret = hisi_qp_send(qp_ctx->qp, &req->sec_sqe); - if (ret == 0) - ctx->sec->sec_dfx.send_cnt++; - mutex_unlock(&qp_ctx->req_lock); + if (ctx->use_pbuf) { + c_req->c_ivin = res->pbuf + SEC_PBUF_IV_OFFSET; + c_req->c_ivin_dma = res->pbuf_dma + SEC_PBUF_IV_OFFSET; + } else { + c_req->c_ivin = res->c_ivin; + c_req->c_ivin_dma = res->c_ivin_dma; + } - return hisi_sec_get_async_ret(ret, req_cnt, ctx->req_fake_limit); + memcpy(c_req->c_ivin, sk_req->iv, ctx->c_ctx.ivsize); } -static void hisi_sec_skcipher_complete(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req, int err_code) +static int sec_skcipher_bd_fill(struct sec_ctx *ctx, struct sec_req *req) { - struct skcipher_request **sk_reqs = - (struct skcipher_request **)req->priv; - int i, req_fusion_num; - - if (ctx->is_fusion == SEC_NO_FUSION) - req_fusion_num = 1; + struct sec_cipher_ctx *c_ctx = &ctx->c_ctx; + struct sec_cipher_req *c_req = &req->c_req; + struct sec_sqe *sec_sqe = &req->sec_sqe; + u8 scene, sa_type, da_type; + u8 bd_type, cipher; + u8 de = 0; + + memset(sec_sqe, 0, sizeof(struct sec_sqe)); + + sec_sqe->type2.c_key_addr = cpu_to_le64(c_ctx->c_key_dma); + sec_sqe->type2.c_ivin_addr = cpu_to_le64(c_req->c_ivin_dma); + sec_sqe->type2.data_src_addr = cpu_to_le64(c_req->c_in_dma); + sec_sqe->type2.data_dst_addr = cpu_to_le64(c_req->c_out_dma); + + sec_sqe->type2.icvw_kmode |= cpu_to_le16(((u16)c_ctx->c_mode) << + SEC_CMODE_OFFSET); + sec_sqe->type2.c_alg = c_ctx->c_alg; + sec_sqe->type2.icvw_kmode |= cpu_to_le16(((u16)c_ctx->c_key_len) << + SEC_CKEY_OFFSET); + + bd_type = SEC_BD_TYPE2; + if (c_req->encrypt) + cipher = SEC_CIPHER_ENC << SEC_CIPHER_OFFSET; else - req_fusion_num = req->fusion_num; + cipher = SEC_CIPHER_DEC << SEC_CIPHER_OFFSET; + sec_sqe->type_cipher_auth = bd_type | cipher; - for (i = 0; i < req_fusion_num; i++) - sk_reqs[i]->base.complete(&sk_reqs[i]->base, err_code); - - /* free sk_reqs if this request is completed */ - if (err_code != -EINPROGRESS) - __sync_add_and_fetch(&ctx->sec->sec_dfx.put_task_cnt, - req_fusion_num); + if (ctx->use_pbuf) + sa_type = SEC_PBUF << SEC_SRC_SGL_OFFSET; else - __sync_add_and_fetch(&ctx->sec->sec_dfx.busy_comp_cnt, - req_fusion_num); -} - -static int hisi_sec_skcipher_callback(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) -{ - struct hisi_sec_qp_ctx *qp_ctx = req->qp_ctx; - int req_id = req->req_id; + sa_type = SEC_SGL << SEC_SRC_SGL_OFFSET; + scene = SEC_COMM_SCENE << SEC_SCENE_OFFSET; + if (c_req->c_in_dma != c_req->c_out_dma) + de = 0x1 << SEC_DE_OFFSET; - if (__sync_bool_compare_and_swap(&req->fake_busy, 1, 0)) - hisi_sec_skcipher_complete(ctx, req, -EINPROGRESS); + sec_sqe->sds_sa_type = (de | scene | sa_type); - hisi_sec_skcipher_complete(ctx, req, req->err_type); + /* Just set DST address type */ + if (ctx->use_pbuf) + da_type = SEC_PBUF << SEC_DST_SGL_OFFSET; + else + da_type = SEC_SGL << SEC_DST_SGL_OFFSET; + sec_sqe->sdm_addr_type |= da_type; - hisi_sec_free_req_id(qp_ctx, req_id); + sec_sqe->type2.clen_ivhlen |= cpu_to_le32(c_req->c_len); + sec_sqe->type2.tag = cpu_to_le16((u16)req->req_id); return 0; } -static int sec_get_issue_id_range(atomic_t *qid, int start, int end) +static void sec_update_iv(struct sec_req *req, enum sec_alg_type alg_type) { - int issue_id; - int issue_len = end - start; + struct skcipher_request *sk_req = req->c_req.sk_req; + u32 iv_size = req->ctx->c_ctx.ivsize; + struct scatterlist *sgl; + unsigned int cryptlen; + size_t sz; + u8 *iv; + + if (req->c_req.encrypt) + sgl = sk_req->dst; + else + sgl = sk_req->src; - issue_id = (atomic_inc_return(qid) - start) % issue_len + start; - if (issue_id % issue_len == 0 && atomic_read(qid) > issue_len) - atomic_sub(issue_len, qid); + iv = sk_req->iv; + cryptlen = sk_req->cryptlen; - return issue_id; + sz = sg_pcopy_to_buffer(sgl, sg_nents(sgl), iv, iv_size, + cryptlen - iv_size); + if (unlikely(sz != iv_size)) + dev_err(SEC_CTX_DEV(req->ctx), "copy output iv error!\n"); } -static inline int sec_get_issue_id(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static void sec_skcipher_callback(struct sec_ctx *ctx, struct sec_req *req, + int err) { - int issue_id; + struct skcipher_request *sk_req = req->c_req.sk_req; + struct sec_qp_ctx *qp_ctx = req->qp_ctx; - if (req->c_req.encrypt == 1) - issue_id = sec_get_issue_id_range(&ctx->enc_qid, 0, - ctx->enc_q_num); - else - issue_id = sec_get_issue_id_range(&ctx->dec_qid, ctx->enc_q_num, - ctx->q_num); + atomic_dec(&qp_ctx->pending_reqs); + sec_free_req_id(req); - return issue_id; -} + /* IV output at encrypto of CBC mode */ + if (!err && ctx->c_ctx.c_mode == SEC_CMODE_CBC && req->c_req.encrypt) + sec_update_iv(req, SEC_SKCIPHER); -static inline void hisi_sec_inc_thread_cnt(struct hisi_sec_ctx *ctx) -{ - int thread_cnt = atomic_inc_return(&ctx->thread_cnt); + if (req->fake_busy) + sk_req->base.complete(&sk_req->base, -EINPROGRESS); - if (thread_cnt > ctx->sec->sec_dfx.thread_cnt) - ctx->sec->sec_dfx.thread_cnt = thread_cnt; + sk_req->base.complete(&sk_req->base, err); } -static struct hisi_sec_req *sec_request_alloc(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *in_req, int *fusion_send, int *fake_busy) +static void sec_request_uninit(struct sec_ctx *ctx, struct sec_req *req) { - struct hisi_sec_qp_ctx *qp_ctx; - struct hisi_sec_req *req; - int issue_id, ret; - - __sync_add_and_fetch(&ctx->sec->sec_dfx.get_task_cnt, 1); - - issue_id = sec_get_issue_id(ctx, in_req); - hisi_sec_inc_thread_cnt(ctx); - - qp_ctx = &ctx->qp_ctx[issue_id]; - - mutex_lock(&qp_ctx->req_lock); - - if (in_req->c_req.sk_req->src == in_req->c_req.sk_req->dst) { - *fusion_send = 1; - } else if (qp_ctx->fusion_req && - qp_ctx->fusion_req->fusion_num < qp_ctx->fusion_limit) { - req = qp_ctx->fusion_req; - - *fake_busy = req->fake_busy; - __sync_add_and_fetch(&ctx->sec->sec_dfx.fake_busy_cnt, - *fake_busy); - - req->priv[req->fusion_num] = in_req->c_req.sk_req; - req->fusion_num++; - in_req->fusion_num = req->fusion_num; - if (req->fusion_num == qp_ctx->fusion_limit) { - *fusion_send = 1; - qp_ctx->fusion_req = NULL; - } - mutex_unlock(&qp_ctx->req_lock); - return req; - } + struct sec_qp_ctx *qp_ctx = req->qp_ctx; - req = in_req; - - if (hisi_sec_alloc_req_id(req, qp_ctx)) { - mutex_unlock(&qp_ctx->req_lock); - return NULL; - } + atomic_dec(&qp_ctx->pending_reqs); + sec_free_req_id(req); + sec_free_queue_id(ctx, req); +} - req->fake_busy = 0; +static int sec_request_init(struct sec_ctx *ctx, struct sec_req *req) +{ + struct sec_qp_ctx *qp_ctx; + int queue_id; - req->req_cnt = atomic_inc_return(&qp_ctx->req_cnt); - if (req->req_cnt >= ctx->req_fake_limit) { - req->fake_busy = 1; - *fake_busy = 1; - __sync_add_and_fetch(&ctx->sec->sec_dfx.fake_busy_cnt, 1); - } + /* To load balance */ + queue_id = sec_alloc_queue_id(ctx, req); + qp_ctx = &ctx->qp_ctx[queue_id]; - ret = ctx->req_op->get_res(ctx, req); - if (ret) { - dev_err(ctx->dev, "req_op get_res failed\n"); - mutex_unlock(&qp_ctx->req_lock); - goto err_free_req_id; + req->req_id = sec_alloc_req_id(req, qp_ctx); + if (unlikely(req->req_id < 0)) { + sec_free_queue_id(ctx, req); + return req->req_id; } - if (ctx->fusion_limit <= 1 || ctx->fusion_tmout_nsec == 0) - *fusion_send = 1; - - if (ctx->is_fusion && *fusion_send == 0) - qp_ctx->fusion_req = req; - - req->fusion_num = 1; - - req->priv[0] = in_req->c_req.sk_req; - req->st_time = ktime_get(); - - mutex_unlock(&qp_ctx->req_lock); - - return req; + if (ctx->fake_req_limit <= atomic_inc_return(&qp_ctx->pending_reqs)) + req->fake_busy = true; + else + req->fake_busy = false; -err_free_req_id: - hisi_sec_free_req_id(qp_ctx, req->req_id); - return NULL; + return 0; } -static int sec_request_transfer(struct hisi_sec_ctx *ctx, - struct hisi_sec_req *req) +static int sec_process(struct sec_ctx *ctx, struct sec_req *req) { + struct sec_cipher_req *c_req = &req->c_req; int ret; - ret = ctx->req_op->buf_map(ctx, req); - if (ret) + ret = sec_request_init(ctx, req); + if (unlikely(ret)) return ret; - ret = ctx->req_op->do_transfer(ctx, req); - if (ret) - goto unmap_req_buf; + ret = sec_request_transfer(ctx, req); + if (unlikely(ret)) + goto err_uninit_req; - memset(&req->sec_sqe, 0, sizeof(struct hisi_sec_sqe)); - ret = ctx->req_op->bd_fill(ctx, req); - if (ret) - goto unmap_req_buf; + /* Output IV as decrypto */ + if (ctx->c_ctx.c_mode == SEC_CMODE_CBC && !req->c_req.encrypt) + sec_update_iv(req, ctx->alg_type); - return 0; + ret = ctx->req_op->bd_send(ctx, req); + if (unlikely(ret != -EBUSY && ret != -EINPROGRESS)) { + dev_err_ratelimited(SEC_CTX_DEV(ctx), + "send sec request failed!\n"); + goto err_send_req; + } -unmap_req_buf: - ctx->req_op->buf_unmap(ctx, req); return ret; -} - -static int sec_request_send(struct hisi_sec_ctx *ctx, struct hisi_sec_req *req) -{ - int ret; - ret = ctx->req_op->bd_send(ctx, req); +err_send_req: + /* As failing, restore the IV from user */ + if (ctx->c_ctx.c_mode == SEC_CMODE_CBC && !req->c_req.encrypt) { + if (ctx->alg_type == SEC_SKCIPHER) + memcpy(req->c_req.sk_req->iv, c_req->c_ivin, + ctx->c_ctx.ivsize); + } - if (ret == 0 || ret == -EBUSY || ret == -EINPROGRESS) - atomic_dec(&ctx->thread_cnt); + sec_request_untransfer(ctx, req); +err_uninit_req: + sec_request_uninit(ctx, req); return ret; } -static int sec_io_proc(struct hisi_sec_ctx *ctx, struct hisi_sec_req *in_req) +static const struct sec_req_op sec_skcipher_req_ops = { + .buf_map = sec_skcipher_sgl_map, + .buf_unmap = sec_skcipher_sgl_unmap, + .do_transfer = sec_skcipher_copy_iv, + .bd_fill = sec_skcipher_bd_fill, + .bd_send = sec_bd_send, + .callback = sec_skcipher_callback, + .process = sec_process, +}; + +static int sec_skcipher_ctx_init(struct crypto_skcipher *tfm) { - struct hisi_sec_req *req; - int fusion_send = 0; - int fake_busy = 0; - int ret; + struct sec_ctx *ctx = crypto_skcipher_ctx(tfm); - in_req->fusion_num = 1; + ctx->req_op = &sec_skcipher_req_ops; - req = sec_request_alloc(ctx, in_req, &fusion_send, &fake_busy); + return sec_skcipher_init(tfm); +} - if (!req) { - dev_err_ratelimited(ctx->dev, "sec_request_alloc failed\n"); - return -ENOMEM; - } +static void sec_skcipher_ctx_exit(struct crypto_skcipher *tfm) +{ + sec_skcipher_uninit(tfm); +} - if (ctx->is_fusion && fusion_send == 0) - return fake_busy ? -EBUSY : -EINPROGRESS; +static int sec_skcipher_param_check(struct sec_ctx *ctx, struct sec_req *sreq) +{ + struct skcipher_request *sk_req = sreq->c_req.sk_req; + struct device *dev = SEC_CTX_DEV(ctx); + u8 c_alg = ctx->c_ctx.c_alg; - ret = sec_request_transfer(ctx, req); - if (ret) { - dev_err_ratelimited(ctx->dev, "sec_transfer ret[%d]\n", ret); - goto err_free_req; + if (unlikely(!sk_req->src || !sk_req->dst)) { + dev_err(dev, "skcipher input param error!\n"); + return -EINVAL; } + sreq->c_req.c_len = sk_req->cryptlen; - ret = sec_request_send(ctx, req); - __sync_add_and_fetch(&ctx->sec->sec_dfx.send_by_full, 1); - if (ret != -EBUSY && ret != -EINPROGRESS) { - dev_err_ratelimited(ctx->dev, "sec_send ret[%d]\n", ret); - goto err_unmap_req; - } + if (ctx->pbuf_supported && sk_req->cryptlen <= SEC_PBUF_SZ) + ctx->use_pbuf = true; - return ret; + if (c_alg == SEC_CALG_3DES) { + if (unlikely(sk_req->cryptlen & (DES3_EDE_BLOCK_SIZE - 1))) { + dev_err(dev, "skcipher 3des input length error!\n"); + return -EINVAL; + } + return 0; + } else if (c_alg == SEC_CALG_AES || c_alg == SEC_CALG_SM4) { + if (unlikely(sk_req->cryptlen & (AES_BLOCK_SIZE - 1))) { + dev_err(dev, "skcipher aes input length error!\n"); + return -EINVAL; + } + return 0; + } -err_unmap_req: - ctx->req_op->buf_unmap(ctx, req); -err_free_req: - hisi_sec_free_req_id(req->qp_ctx, req->req_id); - atomic_dec(&ctx->thread_cnt); - return ret; + dev_err(dev, "skcipher algorithm error!\n"); + return -EINVAL; } static int sec_skcipher_crypto(struct skcipher_request *sk_req, bool encrypt) { - struct crypto_skcipher *atfm = crypto_skcipher_reqtfm(sk_req); - struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(atfm); - struct hisi_sec_req *req = skcipher_request_ctx(sk_req); + struct crypto_skcipher *tfm = crypto_skcipher_reqtfm(sk_req); + struct sec_req *req = skcipher_request_ctx(sk_req); + struct sec_ctx *ctx = crypto_skcipher_ctx(tfm); + int ret; - if (!sk_req->src || !sk_req->dst || !sk_req->cryptlen) - return -EINVAL; + if (!sk_req->cryptlen) + return 0; - req->c_req.sk_req = sk_req; + req->c_req.sk_req = sk_req; req->c_req.encrypt = encrypt; - req->ctx = ctx; + req->ctx = ctx; + + ret = sec_skcipher_param_check(ctx, req); + if (unlikely(ret)) + return -EINVAL; - return sec_io_proc(ctx, req); + return ctx->req_op->process(ctx, req); } static int sec_skcipher_encrypt(struct skcipher_request *sk_req) @@ -1415,7 +998,7 @@ static int sec_skcipher_decrypt(struct skcipher_request *sk_req) } #define SEC_SKCIPHER_GEN_ALG(sec_cra_name, sec_set_key, sec_min_key_size, \ - sec_max_key_size, hisi_sec_cipher_ctx_init_func, blk_size, iv_size)\ + sec_max_key_size, ctx_init, ctx_exit, blk_size, iv_size)\ {\ .base = {\ .cra_name = sec_cra_name,\ @@ -1423,12 +1006,11 @@ static int sec_skcipher_decrypt(struct skcipher_request *sk_req) .cra_priority = SEC_PRIORITY,\ .cra_flags = CRYPTO_ALG_ASYNC,\ .cra_blocksize = blk_size,\ - .cra_ctxsize = sizeof(struct hisi_sec_ctx),\ - .cra_alignmask = 0,\ + .cra_ctxsize = sizeof(struct sec_ctx),\ .cra_module = THIS_MODULE,\ },\ - .init = hisi_sec_cipher_ctx_init_func,\ - .exit = hisi_sec_cipher_ctx_exit,\ + .init = ctx_init,\ + .exit = ctx_exit,\ .setkey = sec_set_key,\ .decrypt = sec_skcipher_decrypt,\ .encrypt = sec_skcipher_encrypt,\ @@ -1437,75 +1019,55 @@ static int sec_skcipher_decrypt(struct skcipher_request *sk_req) .ivsize = iv_size,\ }, -#define SEC_SKCIPHER_NORMAL_ALG(name, key_func, min_key_size, \ +#define SEC_SKCIPHER_ALG(name, key_func, min_key_size, \ max_key_size, blk_size, iv_size) \ SEC_SKCIPHER_GEN_ALG(name, key_func, min_key_size, max_key_size, \ - hisi_sec_cipher_ctx_init_alg, blk_size, iv_size) + sec_skcipher_ctx_init, sec_skcipher_ctx_exit, blk_size, iv_size) -#define SEC_SKCIPHER_FUSION_ALG(name, key_func, min_key_size, \ - max_key_size, blk_size, iv_size) \ - SEC_SKCIPHER_GEN_ALG(name, key_func, min_key_size, max_key_size, \ - hisi_sec_cipher_ctx_init_multi_iv, blk_size, iv_size) - -static struct skcipher_alg sec_normal_algs[] = { - SEC_SKCIPHER_NORMAL_ALG("ecb(aes)", sec_setkey_aes_ecb, - AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE, AES_BLOCK_SIZE, 0) - SEC_SKCIPHER_NORMAL_ALG("cbc(aes)", sec_setkey_aes_cbc, - AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) - SEC_SKCIPHER_NORMAL_ALG("xts(aes)", sec_setkey_aes_xts, - SEC_XTS_MIN_KEY_SIZE, SEC_XTS_MAX_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) - SEC_SKCIPHER_NORMAL_ALG("ecb(des)", sec_setkey_des_ecb, - DES_KEY_SIZE, DES_KEY_SIZE, DES_BLOCK_SIZE, 0) - SEC_SKCIPHER_NORMAL_ALG("cbc(des)", sec_setkey_des_cbc, - DES_KEY_SIZE, DES_KEY_SIZE, DES_BLOCK_SIZE, DES_BLOCK_SIZE) - SEC_SKCIPHER_NORMAL_ALG("ecb(des3_ede)", sec_setkey_3des_ecb, - SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE, DES3_EDE_BLOCK_SIZE, 0) - SEC_SKCIPHER_NORMAL_ALG("cbc(des3_ede)", sec_setkey_3des_cbc, - SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE, DES3_EDE_BLOCK_SIZE, - DES3_EDE_BLOCK_SIZE) - SEC_SKCIPHER_NORMAL_ALG("xts(sm4)", sec_setkey_sm4_xts, - SEC_XTS_MIN_KEY_SIZE, SEC_XTS_MIN_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) - SEC_SKCIPHER_NORMAL_ALG("cbc(sm4)", sec_setkey_sm4_cbc, - AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) -}; +static struct skcipher_alg sec_skciphers[] = { + SEC_SKCIPHER_ALG("ecb(aes)", sec_setkey_aes_ecb, + AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE, + AES_BLOCK_SIZE, 0) + + SEC_SKCIPHER_ALG("cbc(aes)", sec_setkey_aes_cbc, + AES_MIN_KEY_SIZE, AES_MAX_KEY_SIZE, + AES_BLOCK_SIZE, AES_BLOCK_SIZE) + + SEC_SKCIPHER_ALG("xts(aes)", sec_setkey_aes_xts, + SEC_XTS_MIN_KEY_SIZE, SEC_XTS_MAX_KEY_SIZE, + AES_BLOCK_SIZE, AES_BLOCK_SIZE) + + SEC_SKCIPHER_ALG("ecb(des3_ede)", sec_setkey_3des_ecb, + SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE, + DES3_EDE_BLOCK_SIZE, 0) + + SEC_SKCIPHER_ALG("cbc(des3_ede)", sec_setkey_3des_cbc, + SEC_DES3_2KEY_SIZE, SEC_DES3_3KEY_SIZE, + DES3_EDE_BLOCK_SIZE, DES3_EDE_BLOCK_SIZE) + + SEC_SKCIPHER_ALG("xts(sm4)", sec_setkey_sm4_xts, + SEC_XTS_MIN_KEY_SIZE, SEC_XTS_MIN_KEY_SIZE, + AES_BLOCK_SIZE, AES_BLOCK_SIZE) + + SEC_SKCIPHER_ALG("cbc(sm4)", sec_setkey_sm4_cbc, + AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE, + AES_BLOCK_SIZE, AES_BLOCK_SIZE) -static struct skcipher_alg sec_fusion_algs[] = { - SEC_SKCIPHER_FUSION_ALG("xts(sm4)", sec_setkey_sm4_xts, - SEC_XTS_MIN_KEY_SIZE, SEC_XTS_MIN_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) - SEC_SKCIPHER_FUSION_ALG("cbc(sm4)", sec_setkey_sm4_cbc, - AES_MIN_KEY_SIZE, AES_MIN_KEY_SIZE, AES_BLOCK_SIZE, - AES_BLOCK_SIZE) }; -int hisi_sec_register_to_crypto(int fusion_limit) +int sec_register_to_crypto(void) { /* To avoid repeat register */ - if (atomic_add_return(1, &sec_active_devs) == 1) { - if (fusion_limit == 1) - return crypto_register_skciphers(sec_normal_algs, - ARRAY_SIZE(sec_normal_algs)); - else - return crypto_register_skciphers(sec_fusion_algs, - ARRAY_SIZE(sec_fusion_algs)); - } + if (atomic_add_return(1, &sec_active_devs) == 1) + return crypto_register_skciphers(sec_skciphers, + ARRAY_SIZE(sec_skciphers)); return 0; } -void hisi_sec_unregister_from_crypto(int fusion_limit) +void sec_unregister_from_crypto(void) { - if (atomic_sub_return(1, &sec_active_devs) == 0) { - if (fusion_limit == 1) - crypto_unregister_skciphers(sec_normal_algs, - ARRAY_SIZE(sec_normal_algs)); - else - crypto_unregister_skciphers(sec_fusion_algs, - ARRAY_SIZE(sec_fusion_algs)); - } + if (atomic_sub_return(1, &sec_active_devs) == 0) + crypto_unregister_skciphers(sec_skciphers, + ARRAY_SIZE(sec_skciphers)); } - diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.h b/drivers/crypto/hisilicon/sec2/sec_crypto.h index bffbeba..221257e 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.h +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.h @@ -1,13 +1,238 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* Copyright (c) 2018-2019 HiSilicon Limited. */ -#ifndef HISI_SEC_CRYPTO_H -#define HISI_SEC_CRYPTO_H +#ifndef __HISI_SEC_V2_CRYPTO_H +#define __HISI_SEC_V2_CRYPTO_H -#define SEC_IV_SIZE 24 -#define SEC_MAX_KEY_SIZE 64 +#define SEC_IV_SIZE 24 +#define SEC_MAX_KEY_SIZE 64 +#define SEC_MAX_AUTH_KEY_SIZE 64 -int hisi_sec_register_to_crypto(int fusion_limit); -void hisi_sec_unregister_from_crypto(int fusion_limit); +#define SEC_COMM_SCENE 0 +enum sec_calg { + SEC_CALG_3DES = 0x1, + SEC_CALG_AES = 0x2, + SEC_CALG_SM4 = 0x3, +}; + +enum sec_hash_alg { + SEC_A_HMAC_SHA1 = 0x10, + SEC_A_HMAC_SHA256 = 0x11, + SEC_A_HMAC_SHA512 = 0x15, +}; + +enum sec_mac_len { + SEC_HMAC_SHA1_MAC = 20, + SEC_HMAC_SHA256_MAC = 32, + SEC_HMAC_SHA512_MAC = 64, +}; + +enum sec_cmode { + SEC_CMODE_ECB = 0x0, + SEC_CMODE_CBC = 0x1, + SEC_CMODE_CTR = 0x4, + SEC_CMODE_XTS = 0x7, +}; + +enum sec_ckey_type { + SEC_CKEY_128BIT = 0x0, + SEC_CKEY_192BIT = 0x1, + SEC_CKEY_256BIT = 0x2, + SEC_CKEY_3DES_3KEY = 0x1, + SEC_CKEY_3DES_2KEY = 0x3, +}; + +enum sec_bd_type { + SEC_BD_TYPE1 = 0x1, + SEC_BD_TYPE2 = 0x2, +}; + +enum sec_auth { + SEC_NO_AUTH = 0x0, + SEC_AUTH_TYPE1 = 0x1, + SEC_AUTH_TYPE2 = 0x2, +}; + +enum sec_cipher_dir { + SEC_CIPHER_ENC = 0x1, + SEC_CIPHER_DEC = 0x2, +}; + +enum sec_addr_type { + SEC_PBUF = 0x0, + SEC_SGL = 0x1, + SEC_PRP = 0x2, +}; + +enum sec_ci_gen { + SEC_CI_GEN_BY_ADDR = 0x0, + SEC_CI_GEN_BY_LBA = 0X3, +}; + +enum sec_scene { + SEC_SCENE_IPSEC = 0x1, + SEC_SCENE_STORAGE = 0x5, +}; + +enum sec_work_mode { + SEC_NO_FUSION = 0x0, + SEC_IV_FUSION = 0x1, + SEC_FUSION_BUTT +}; + +enum sec_req_ops_type { + SEC_OPS_SKCIPHER_ALG = 0x0, + SEC_OPS_DMCRYPT = 0x1, + SEC_OPS_MULTI_IV = 0x2, + SEC_OPS_BUTT +}; + +struct sec_sqe_type2 { + /* + * mac_len: 0~4 bits + * a_key_len: 5~10 bits + * a_alg: 11~16 bits + */ + __le32 mac_key_alg; + + /* + * c_icv_len: 0~5 bits + * c_width: 6~8 bits + * c_key_len: 9~11 bits + * c_mode: 12~15 bits + */ + __le16 icvw_kmode; + + /* c_alg: 0~3 bits */ + __u8 c_alg; + __u8 rsvd4; + + /* + * a_len: 0~23 bits + * iv_offset_l: 24~31 bits + */ + __le32 alen_ivllen; + + /* + * c_len: 0~23 bits + * iv_offset_h: 24~31 bits + */ + __le32 clen_ivhlen; + + __le16 auth_src_offset; + __le16 cipher_src_offset; + __le16 cs_ip_header_offset; + __le16 cs_udp_header_offset; + __le16 pass_word_len; + __le16 dk_len; + __u8 salt3; + __u8 salt2; + __u8 salt1; + __u8 salt0; + + __le16 tag; + __le16 rsvd5; + + /* + * c_pad_type: 0~3 bits + * c_pad_len: 4~11 bits + * c_pad_data_type: 12~15 bits + */ + __le16 cph_pad; + + /* c_pad_len_field: 0~1 bits */ + __le16 c_pad_len_field; + + __le64 long_a_data_len; + __le64 a_ivin_addr; + __le64 a_key_addr; + __le64 mac_addr; + __le64 c_ivin_addr; + __le64 c_key_addr; + + __le64 data_src_addr; + __le64 data_dst_addr; + + /* + * done: 0 bit + * icv: 1~3 bits + * csc: 4~6 bits + * flag: 7-10 bits + * dif_check: 11~13 bits + */ + __le16 done_flag; + + __u8 error_type; + __u8 warning_type; + __u8 mac_i3; + __u8 mac_i2; + __u8 mac_i1; + __u8 mac_i0; + __le16 check_sum_i; + __u8 tls_pad_len_i; + __u8 rsvd12; + __le32 counter; +}; + +struct sec_sqe { + /* + * type: 0~3 bits + * cipher: 4~5 bits + * auth: 6~7 bit s + */ + __u8 type_cipher_auth; + + /* + * seq: 0 bit + * de: 1~2 bits + * scene: 3~6 bits + * src_addr_type: ~7 bit, with sdm_addr_type 0-1 bits + */ + __u8 sds_sa_type; + + /* + * src_addr_type: 0~1 bits, not used now, + * if support PRP, set this field, or set zero. + * dst_addr_type: 2~4 bits + * mac_addr_type: 5~7 bits + */ + __u8 sdm_addr_type; + __u8 rsvd0; + + /* + * nonce_len(type2): 0~3 bits + * huk(type2): 4 bit + * key_s(type2): 5 bit + * ci_gen: 6~7 bits + */ + __u8 huk_key_ci; + + /* + * ai_gen: 0~1 bits + * a_pad(type2): 2~3 bits + * c_s(type2): 4~5 bits + */ + __u8 ai_apd_cs; + + /* + * rhf(type2): 0 bit + * c_key_type: 1~2 bits + * a_key_type: 3~4 bits + * write_frame_len(type2): 5~7 bits + */ + __u8 rca_key_frm; + + /* + * cal_iv_addr_en(type2): 0 bit + * tls_up(type2): 1 bit + * inveld: 7 bit + */ + __u8 iv_tls_ld; + + struct sec_sqe_type2 type2; +}; + +int sec_register_to_crypto(void); +void sec_unregister_from_crypto(void); #endif diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index b4e5d57f..b3340c0 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -1,33 +1,30 @@ // SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (c) 2018-2019 HiSilicon Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ +/* Copyright (c) 2018-2019 HiSilicon Limited. */ #include <linux/acpi.h> #include <linux/aer.h> #include <linux/bitops.h> #include <linux/debugfs.h> #include <linux/init.h> +#include <linux/iommu.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/pci.h> #include <linux/seq_file.h> #include <linux/topology.h> -#include <linux/uacce.h> + #include "sec.h" -#include "sec_crypto.h" #define SEC_QUEUE_NUM_V1 4096 #define SEC_QUEUE_NUM_V2 1024 #define SEC_PF_PCI_DEVICE_ID 0xa255 #define SEC_VF_PCI_DEVICE_ID 0xa256 +#define SEC_BD_ERR_CHK_EN0 0xEFFFFFFF +#define SEC_BD_ERR_CHK_EN1 0x7ffff7fd +#define SEC_BD_ERR_CHK_EN3 0xffffbfff + #define SEC_SQE_SIZE 128 #define SEC_SQ_SIZE (SEC_SQE_SIZE * QM_Q_DEPTH) #define SEC_PF_DEF_Q_NUM 64 @@ -35,8 +32,6 @@ #define SEC_CTX_Q_NUM_DEF 24 #define SEC_CTX_Q_NUM_MAX 32 -#define SEC_AM_CFG_SIG_PORT_MAX_TRANS 0x300014 -#define SEC_SINGLE_PORT_MAX_TRANS 0x2060 #define SEC_CTRL_CNT_CLR_CE 0x301120 #define SEC_CTRL_CNT_CLR_CE_BIT BIT(0) #define SEC_ENGINE_PF_CFG_OFF 0x300000 @@ -44,13 +39,13 @@ #define SEC_CORE_INT_SOURCE 0x301010 #define SEC_CORE_INT_MASK 0x301000 #define SEC_CORE_INT_STATUS 0x301008 -#define SEC_CORE_INT_STATUS_M_ECC BIT(2) -#define SEC_CORE_ECC_INFO 0x301C14 -#define SEC_ECC_NUM(err_val) (((err_val) >> 16) & 0xFFFF) -#define SEC_ECC_ADDR(err_val) ((err_val) & 0xFFFF) +#define SEC_CORE_SRAM_ECC_ERR_INFO 0x301C14 +#define SEC_ECC_NUM(err) (((err) >> 16) & 0xFFFF) +#define SEC_ECC_ADDR(err) ((err) >> 0) #define SEC_CORE_INT_DISABLE 0x0 #define SEC_CORE_INT_ENABLE 0x1ff #define SEC_CORE_INT_CLEAR 0x1ff +#define SEC_SAA_ENABLE 0x17f #define SEC_RAS_CE_REG 0x301050 #define SEC_RAS_FE_REG 0x301054 @@ -64,6 +59,7 @@ #define SEC_CONTROL_REG 0x0200 #define SEC_TRNG_EN_SHIFT 8 +#define SEC_CLK_GATE_ENABLE BIT(3) #define SEC_CLK_GATE_DISABLE (~BIT(3)) #define SEC_AXI_SHUTDOWN_ENABLE BIT(12) #define SEC_AXI_SHUTDOWN_DISABLE 0xFFFFEFFF @@ -71,26 +67,24 @@ #define SEC_INTERFACE_USER_CTRL0_REG 0x0220 #define SEC_INTERFACE_USER_CTRL1_REG 0x0224 -#define SEC_SAA_EN_REG 0x270 -#define SEC_SAA_EN 0x17F +#define SEC_SAA_EN_REG 0x0270 #define SEC_BD_ERR_CHK_EN_REG0 0x0380 #define SEC_BD_ERR_CHK_EN_REG1 0x0384 #define SEC_BD_ERR_CHK_EN_REG3 0x038c -#define SEC_BD_ERR_CHK_EN0 0xEFFFFFFF -#define SEC_BD_ERR_CHK_EN1 0x7FFFF7FD -#define SEC_BD_ERR_CHK_EN3 0xFFFFBFFF #define SEC_USER0_SMMU_NORMAL (BIT(23) | BIT(15)) #define SEC_USER1_SMMU_NORMAL (BIT(31) | BIT(23) | BIT(15) | BIT(7)) +#define SEC_CORE_INT_STATUS_M_ECC BIT(2) #define SEC_DELAY_10_US 10 #define SEC_POLL_TIMEOUT_US 1000 #define SEC_DBGFS_VAL_MAX_LEN 20 +#define SEC_SINGLE_PORT_MAX_TRANS 0x2060 #define SEC_ADDR(qm, offset) ((qm)->io_base + (offset) + \ SEC_ENGINE_PF_CFG_OFF + SEC_ACC_COMMON_REG_OFF) -struct hisi_sec_hw_error { +struct sec_hw_error { u32 int_msk; const char *msg; }; @@ -98,9 +92,8 @@ struct hisi_sec_hw_error { static const char sec_name[] = "hisi_sec2"; static struct dentry *sec_debugfs_root; static struct hisi_qm_list sec_devices; -static struct workqueue_struct *sec_wq; -static const struct hisi_sec_hw_error sec_hw_error[] = { +static const struct sec_hw_error sec_hw_errors[] = { {.int_msk = BIT(0), .msg = "sec_axi_rresp_err_rint"}, {.int_msk = BIT(1), .msg = "sec_axi_bresp_err_rint"}, {.int_msk = BIT(2), .msg = "sec_ecc_2bit_err_rint"}, @@ -113,36 +106,13 @@ struct hisi_sec_hw_error { { /* sentinel */ } }; -enum ctrl_debug_file_index { - SEC_CURRENT_QM, - SEC_CLEAR_ENABLE, - SEC_DEBUG_FILE_NUM, -}; - -static const char * const ctrl_debug_file_name[] = { +static const char * const sec_dbg_file_name[] = { [SEC_CURRENT_QM] = "current_qm", [SEC_CLEAR_ENABLE] = "clear_enable", }; -struct ctrl_debug_file { - enum ctrl_debug_file_index index; - spinlock_t lock; - struct hisi_sec_ctrl *ctrl; -}; - -/* - * One SEC controller has one PF and multiple VFs, some global configurations - * which PF has need this structure. - * - * Just relevant for PF. - */ -struct hisi_sec_ctrl { - struct hisi_sec *hisi_sec; - struct ctrl_debug_file files[SEC_DEBUG_FILE_NUM]; -}; - static struct debugfs_reg32 sec_dfx_regs[] = { - {"SEC_PF_ABNORMAL_INT_SOURCE ", 0x301010}, + {"SEC_PF_ABNORMAL_INT_SOURCE ", 0x301010}, {"SEC_SAA_EN ", 0x301270}, {"SEC_BD_LATENCY_MIN ", 0x301600}, {"SEC_BD_LATENCY_MAX ", 0x301608}, @@ -262,71 +232,12 @@ static int vfs_num_set(const char *val, const struct kernel_param *kp) module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444); MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)"); -static int sec_fusion_limit_set(const char *val, const struct kernel_param *kp) -{ - u32 fusion_limit; - int ret; - - if (!val) - return -EINVAL; - - ret = kstrtou32(val, 10, &fusion_limit); - if (ret) - return ret; - - if (!fusion_limit || fusion_limit > FUSION_LIMIT_MAX) { - pr_err("fusion_limit[%u] is't at range(0, %d)", fusion_limit, - FUSION_LIMIT_MAX); - return -EINVAL; - } - - return param_set_int(val, kp); -} - -static const struct kernel_param_ops sec_fusion_limit_ops = { - .set = sec_fusion_limit_set, - .get = param_get_int, -}; -static u32 fusion_limit = FUSION_LIMIT_DEF; - -module_param_cb(fusion_limit, &sec_fusion_limit_ops, &fusion_limit, 0444); -MODULE_PARM_DESC(fusion_limit, "(1, acc_sgl_sge_nr of hisilicon QM)"); - -static int sec_fusion_tmout_ns_set(const char *val, - const struct kernel_param *kp) -{ - u32 fusion_tmout_nsec; - int ret; - - if (!val) - return -EINVAL; - - ret = kstrtou32(val, 10, &fusion_tmout_nsec); - if (ret) - return ret; - - if (fusion_tmout_nsec > NSEC_PER_SEC) { - pr_err("fusion_tmout_nsec[%u] is too large", fusion_tmout_nsec); - return -EINVAL; - } - - return param_set_int(val, kp); -} - -static const struct kernel_param_ops sec_fusion_time_ops = { - .set = sec_fusion_tmout_ns_set, - .get = param_get_int, -}; -static u32 fusion_time = FUSION_TMOUT_NSEC_DEF; /* ns */ -module_param_cb(fusion_time, &sec_fusion_time_ops, &fusion_time, 0444); -MODULE_PARM_DESC(fusion_time, "(0, NSEC_PER_SEC)"); - -static const struct pci_device_id hisi_sec_dev_ids[] = { +static const struct pci_device_id sec_dev_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_PF_PCI_DEVICE_ID) }, { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_VF_PCI_DEVICE_ID) }, { 0, } }; -MODULE_DEVICE_TABLE(pci, hisi_sec_dev_ids); +MODULE_DEVICE_TABLE(pci, sec_dev_ids); static u8 sec_get_endian(struct hisi_qm *qm) { @@ -390,9 +301,9 @@ static int sec_engine_init(struct hisi_qm *qm) writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG)); writel(SEC_SINGLE_PORT_MAX_TRANS, - qm->io_base + SEC_AM_CFG_SIG_PORT_MAX_TRANS); + qm->io_base + AM_CFG_SINGLE_PORT_MAX_TRANS); - writel(SEC_SAA_EN, SEC_ADDR(qm, SEC_SAA_EN_REG)); + writel(SEC_SAA_ENABLE, SEC_ADDR(qm, SEC_SAA_EN_REG)); /* Enable sm4 extra mode, as ctr/ecb */ writel_relaxed(SEC_BD_ERR_CHK_EN0, @@ -436,6 +347,7 @@ static int sec_set_user_domain_and_cache(struct hisi_qm *qm) return sec_engine_init(qm); } +/* sec_debug_regs_clear() - clear the sec debug regs */ static void sec_debug_regs_clear(struct hisi_qm *qm) { /* clear current_qm */ @@ -497,23 +409,16 @@ static void sec_hw_error_disable(struct hisi_qm *qm) writel(val, SEC_ADDR(qm, SEC_CONTROL_REG)); } -static inline struct hisi_qm *file_to_qm(struct ctrl_debug_file *file) +static u32 sec_current_qm_read(struct sec_debug_file *file) { - struct hisi_sec *hisi_sec = file->ctrl->hisi_sec; - - return &hisi_sec->qm; -} - -static u32 current_qm_read(struct ctrl_debug_file *file) -{ - struct hisi_qm *qm = file_to_qm(file); + struct hisi_qm *qm = file->qm; return readl(qm->io_base + QM_DFX_MB_CNT_VF); } -static int current_qm_write(struct ctrl_debug_file *file, u32 val) +static int sec_current_qm_write(struct sec_debug_file *file, u32 val) { - struct hisi_qm *qm = file_to_qm(file); + struct hisi_qm *qm = file->qm; u32 vfq_num; u32 tmp; @@ -521,17 +426,17 @@ static int current_qm_write(struct ctrl_debug_file *file, u32 val) return -EINVAL; /* According PF or VF Dev ID to calculation curr_qm_qp_num and store */ - if (val == 0) { + if (!val) { qm->debug.curr_qm_qp_num = qm->qp_num; } else { vfq_num = (qm->ctrl_q_num - qm->qp_num) / qm->vfs_num; - if (val == qm->vfs_num) { + + if (val == qm->vfs_num) qm->debug.curr_qm_qp_num = qm->ctrl_q_num - qm->qp_num - (qm->vfs_num - 1) * vfq_num; - } else { + else qm->debug.curr_qm_qp_num = vfq_num; - } } writel(val, qm->io_base + QM_DFX_MB_CNT_VF); @@ -548,33 +453,33 @@ static int current_qm_write(struct ctrl_debug_file *file, u32 val) return 0; } -static u32 clear_enable_read(struct ctrl_debug_file *file) +static u32 sec_clear_enable_read(struct sec_debug_file *file) { - struct hisi_qm *qm = file_to_qm(file); + struct hisi_qm *qm = file->qm; return readl(qm->io_base + SEC_CTRL_CNT_CLR_CE) & SEC_CTRL_CNT_CLR_CE_BIT; } -static int clear_enable_write(struct ctrl_debug_file *file, u32 val) +static int sec_clear_enable_write(struct sec_debug_file *file, u32 val) { - struct hisi_qm *qm = file_to_qm(file); + struct hisi_qm *qm = file->qm; u32 tmp; if (val != 1 && val) return -EINVAL; tmp = (readl(qm->io_base + SEC_CTRL_CNT_CLR_CE) & - ~SEC_CTRL_CNT_CLR_CE_BIT) | val; + ~SEC_CTRL_CNT_CLR_CE_BIT) | val; writel(tmp, qm->io_base + SEC_CTRL_CNT_CLR_CE); return 0; } -static ssize_t ctrl_debug_read(struct file *filp, char __user *buf, +static ssize_t sec_debug_read(struct file *filp, char __user *buf, size_t count, loff_t *pos) { - struct ctrl_debug_file *file = filp->private_data; + struct sec_debug_file *file = filp->private_data; char tbuf[SEC_DBGFS_VAL_MAX_LEN]; u32 val; int ret; @@ -583,10 +488,10 @@ static ssize_t ctrl_debug_read(struct file *filp, char __user *buf, switch (file->index) { case SEC_CURRENT_QM: - val = current_qm_read(file); + val = sec_current_qm_read(file); break; case SEC_CLEAR_ENABLE: - val = clear_enable_read(file); + val = sec_clear_enable_read(file); break; default: spin_unlock_irq(&file->lock); @@ -599,10 +504,10 @@ static ssize_t ctrl_debug_read(struct file *filp, char __user *buf, return simple_read_from_buffer(buf, count, pos, tbuf, ret); } -static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, - size_t count, loff_t *pos) +static ssize_t sec_debug_write(struct file *filp, const char __user *buf, + size_t count, loff_t *pos) { - struct ctrl_debug_file *file = filp->private_data; + struct sec_debug_file *file = filp->private_data; char tbuf[SEC_DBGFS_VAL_MAX_LEN]; unsigned long val; int len, ret; @@ -626,12 +531,12 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, switch (file->index) { case SEC_CURRENT_QM: - ret = current_qm_write(file, val); + ret = sec_current_qm_write(file, val); if (ret) goto err_input; break; case SEC_CLEAR_ENABLE: - ret = clear_enable_write(file, val); + ret = sec_clear_enable_write(file, val); if (ret) goto err_input; break; @@ -649,30 +554,30 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, return ret; } -static const struct file_operations ctrl_debug_fops = { +static const struct file_operations sec_dbg_fops = { .owner = THIS_MODULE, .open = simple_open, - .read = ctrl_debug_read, - .write = ctrl_debug_write, + .read = sec_debug_read, + .write = sec_debug_write, }; -static int hisi_sec_core_debug_init(struct hisi_qm *qm) +static int sec_debugfs_atomic64_get(void *data, u64 *val) { - struct hisi_sec *sec = container_of(qm, struct hisi_sec, qm); + *val = atomic64_read((atomic64_t *)data); + return 0; +} +DEFINE_DEBUGFS_ATTRIBUTE(sec_atomic64_ops, sec_debugfs_atomic64_get, + NULL, "%lld\n"); + +static int sec_core_debug_init(struct hisi_qm *qm) +{ + struct sec_dev *sec = container_of(qm, struct sec_dev, qm); struct device *dev = &qm->pdev->dev; - struct hisi_sec_dfx *dfx = &sec->sec_dfx; + struct sec_dfx *dfx = &sec->debug.dfx; struct debugfs_regset32 *regset; - struct dentry *tmp_d, *tmp; - char buf[SEC_DBGFS_VAL_MAX_LEN]; - int ret; + struct dentry *tmp_d; - ret = snprintf(buf, SEC_DBGFS_VAL_MAX_LEN, "sec_dfx"); - if (ret < 0) - return -ENOENT; - - tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); - if (!tmp_d) - return -ENOENT; + tmp_d = debugfs_create_dir("sec_dfx", qm->debug.debug_root); regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); if (!regset) @@ -682,123 +587,69 @@ static int hisi_sec_core_debug_init(struct hisi_qm *qm) regset->nregs = ARRAY_SIZE(sec_dfx_regs); regset->base = qm->io_base; - tmp = debugfs_create_regset32("regs", 0444, tmp_d, regset); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("send_cnt", 0444, tmp_d, &dfx->send_cnt); - if (!tmp) - return -ENOENT; + debugfs_create_regset32("regs", 0444, tmp_d, regset); - tmp = debugfs_create_u64("send_by_tmout", 0444, tmp_d, - &dfx->send_by_tmout); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("send_by_full", 0444, tmp_d, - &dfx->send_by_full); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("recv_cnt", 0444, tmp_d, &dfx->recv_cnt); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("get_task_cnt", 0444, tmp_d, - &dfx->get_task_cnt); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("put_task_cnt", 0444, tmp_d, - &dfx->put_task_cnt); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("gran_task_cnt", 0444, tmp_d, - &dfx->gran_task_cnt); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("thread_cnt", 0444, tmp_d, &dfx->thread_cnt); - if (!tmp) - return -ENOENT; - - tmp = debugfs_create_u64("fake_busy_cnt", 0444, - tmp_d, &dfx->fake_busy_cnt); - if (!tmp) - return -ENOENT; + debugfs_create_file("send_cnt", 0444, tmp_d, + &dfx->send_cnt, &sec_atomic64_ops); - tmp = debugfs_create_u64("busy_comp_cnt", 0444, tmp_d, - &dfx->busy_comp_cnt); - if (!tmp) - return -ENOENT; + debugfs_create_file("recv_cnt", 0444, tmp_d, + &dfx->recv_cnt, &sec_atomic64_ops); return 0; } -static int hisi_sec_ctrl_debug_init(struct hisi_qm *qm) +static int sec_debug_init(struct hisi_qm *qm) { - struct hisi_sec *sec = container_of(qm, struct hisi_sec, qm); - struct dentry *tmp; + struct sec_dev *sec = container_of(qm, struct sec_dev, qm); int i; for (i = SEC_CURRENT_QM; i < SEC_DEBUG_FILE_NUM; i++) { - spin_lock_init(&sec->ctrl->files[i].lock); - sec->ctrl->files[i].ctrl = sec->ctrl; - sec->ctrl->files[i].index = i; + spin_lock_init(&sec->debug.files[i].lock); + sec->debug.files[i].index = i; + sec->debug.files[i].qm = qm; - tmp = debugfs_create_file(ctrl_debug_file_name[i], 0600, + debugfs_create_file(sec_dbg_file_name[i], 0600, qm->debug.debug_root, - sec->ctrl->files + i, - &ctrl_debug_fops); - if (!tmp) - return -ENOENT; + sec->debug.files + i, + &sec_dbg_fops); } - return hisi_sec_core_debug_init(qm); + return sec_core_debug_init(qm); } -static int hisi_sec_debugfs_init(struct hisi_qm *qm) +static int sec_debugfs_init(struct hisi_qm *qm) { struct device *dev = &qm->pdev->dev; - struct dentry *dev_d; int ret; - dev_d = debugfs_create_dir(dev_name(dev), sec_debugfs_root); - if (!dev_d) - return -ENOENT; - - qm->debug.debug_root = dev_d; + qm->debug.debug_root = debugfs_create_dir(dev_name(dev), + sec_debugfs_root); ret = hisi_qm_debug_init(qm); if (ret) goto failed_to_create; if (qm->pdev->device == SEC_PF_PCI_DEVICE_ID) { - ret = hisi_sec_ctrl_debug_init(qm); + ret = sec_debug_init(qm); if (ret) goto failed_to_create; } return 0; - failed_to_create: +failed_to_create: debugfs_remove_recursive(sec_debugfs_root); + return ret; } -static void hisi_sec_debugfs_exit(struct hisi_qm *qm) +static void sec_debugfs_exit(struct hisi_qm *qm) { debugfs_remove_recursive(qm->debug.debug_root); - - if (qm->fun_type == QM_HW_PF) { - sec_debug_regs_clear(qm); - qm->debug.curr_qm_qp_num = 0; - } } static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts) { - const struct hisi_sec_hw_error *errs = sec_hw_error; + const struct sec_hw_error *errs = sec_hw_errors; struct device *dev = &qm->pdev->dev; u32 err_val; @@ -809,7 +660,7 @@ static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts) if (SEC_CORE_INT_STATUS_M_ECC & errs->int_msk) { err_val = readl(qm->io_base + - SEC_CORE_ECC_INFO); + SEC_CORE_SRAM_ECC_ERR_INFO); dev_err(dev, "multi ecc sram num=0x%x\n", SEC_ECC_NUM(err_val)); } @@ -837,19 +688,10 @@ static void sec_open_axi_master_ooo(struct hisi_qm *qm) writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); } -static int hisi_sec_pf_probe_init(struct hisi_qm *qm) +static int sec_pf_probe_init(struct hisi_qm *qm) { - struct hisi_sec *hisi_sec = container_of(qm, struct hisi_sec, qm); - struct hisi_sec_ctrl *ctrl; int ret; - ctrl = devm_kzalloc(&qm->pdev->dev, sizeof(*ctrl), GFP_KERNEL); - if (!ctrl) - return -ENOMEM; - - hisi_sec->ctrl = ctrl; - ctrl->hisi_sec = hisi_sec; - switch (qm->ver) { case QM_HW_V1: qm->ctrl_q_num = SEC_QUEUE_NUM_V1; @@ -868,7 +710,7 @@ static int hisi_sec_pf_probe_init(struct hisi_qm *qm) qm->err_ini.err_info.ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC; qm->err_ini.err_info.ce = QM_BASE_CE; qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT | - QM_ACC_WB_NOT_READY_TIMEOUT; + QM_ACC_WB_NOT_READY_TIMEOUT; qm->err_ini.err_info.fe = 0; qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; qm->err_ini.err_info.acpi_rst = "SRST"; @@ -884,42 +726,32 @@ static int hisi_sec_pf_probe_init(struct hisi_qm *qm) return ret; hisi_qm_dev_err_init(qm); - qm->err_ini.open_axi_master_ooo(qm); sec_debug_regs_clear(qm); return 0; } -static int hisi_sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) +static int sec_probe_init(struct hisi_qm *qm) { int ret; -#ifdef CONFIG_CRYPTO_QM_UACCE - qm->algs = "sec\ncipher\ndigest\n"; - qm->uacce_mode = uacce_mode; -#endif - qm->pdev = pdev; - ret = hisi_qm_pre_init(qm, pf_q_num, SEC_PF_DEF_Q_BASE); - if (ret) - return ret; - qm->sqe_size = SEC_SQE_SIZE; - qm->dev_name = sec_name; - qm->qm_list = &sec_devices; - qm->wq = sec_wq; - - return 0; -} + qm->wq = alloc_workqueue("%s", WQ_HIGHPRI | WQ_CPU_INTENSIVE | + WQ_MEM_RECLAIM | WQ_UNBOUND, num_online_cpus(), + pci_name(qm->pdev)); + if (!qm->wq) { + pci_err(qm->pdev, "fail to alloc workqueue\n"); + return -ENOMEM; + } -static int hisi_sec_probe_init(struct hisi_qm *qm) -{ if (qm->fun_type == QM_HW_PF) { - return hisi_sec_pf_probe_init(qm); + ret = sec_pf_probe_init(qm); + if (ret) + goto err_probe_uninit; } else if (qm->fun_type == QM_HW_VF) { /* * have no way to get qm configure in VM in v1 hardware, * so currently force PF to uses SEC_PF_DEF_Q_NUM, and force * to trigger only one VF in v1 hardware. - * * v2 hardware has no such problem. */ if (qm->ver == QM_HW_V1) { @@ -927,41 +759,92 @@ static int hisi_sec_probe_init(struct hisi_qm *qm) qm->qp_num = SEC_QUEUE_NUM_V1 - SEC_PF_DEF_Q_NUM; } else if (qm->ver == QM_HW_V2) { /* v2 starts to support get vft by mailbox */ - return hisi_qm_get_vft(qm, &qm->qp_base, &qm->qp_num); + ret = hisi_qm_get_vft(qm, &qm->qp_base, &qm->qp_num); + if (ret) + goto err_probe_uninit; } + } else { + ret = -ENODEV; + goto err_probe_uninit; } return 0; + +err_probe_uninit: + destroy_workqueue(qm->wq); + return ret; +} + +static void sec_probe_uninit(struct hisi_qm *qm) +{ + if (qm->fun_type == QM_HW_PF) + hisi_qm_dev_err_uninit(qm); + destroy_workqueue(qm->wq); +} + +static int sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) +{ + int ret; + +#ifdef CONFIG_CRYPTO_QM_UACCE + qm->algs = "sec\ncipher\ndigest\n"; + qm->uacce_mode = uacce_mode; +#endif + qm->pdev = pdev; + ret = hisi_qm_pre_init(qm, pf_q_num, SEC_PF_DEF_Q_BASE); + if (ret) + return ret; + + qm->qm_list = &sec_devices; + qm->sqe_size = SEC_SQE_SIZE; + qm->dev_name = sec_name; + + return 0; +} + +static void sec_iommu_used_check(struct sec_dev *sec) +{ + struct iommu_domain *domain; + struct device *dev = &sec->qm.pdev->dev; + + domain = iommu_get_domain_for_dev(dev); + + /* Check if iommu is used */ + sec->iommu_used = false; + if (domain) { + if (domain->type & __IOMMU_DOMAIN_PAGING) + sec->iommu_used = true; + dev_info(dev, "SMMU Opened! the iommu type:= %d!\n", + domain->type); + } } -static int hisi_sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) +static int sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - struct hisi_sec *hisi_sec; + struct sec_dev *sec; struct hisi_qm *qm; int ret; - hisi_sec = devm_kzalloc(&pdev->dev, sizeof(*hisi_sec), GFP_KERNEL); - if (!hisi_sec) + sec = devm_kzalloc(&pdev->dev, sizeof(*sec), GFP_KERNEL); + if (!sec) return -ENOMEM; - qm = &hisi_sec->qm; + qm = &sec->qm; qm->fun_type = pdev->is_physfn ? QM_HW_PF : QM_HW_VF; - ret = hisi_sec_qm_pre_init(qm, pdev); + ret = sec_qm_pre_init(qm, pdev); if (ret) return ret; - hisi_sec->ctx_q_num = ctx_q_num; - hisi_sec->fusion_limit = fusion_limit; - hisi_sec->fusion_tmout_nsec = fusion_time; - + sec->ctx_q_num = ctx_q_num; + sec_iommu_used_check(sec); ret = hisi_qm_init(qm); if (ret) { pci_err(pdev, "Failed to init qm (%d)!\n", ret); return ret; } - ret = hisi_sec_probe_init(qm); + ret = sec_probe_init(qm); if (ret) { pci_err(pdev, "Failed to probe init (%d)!\n", ret); goto err_qm_uninit; @@ -970,18 +853,18 @@ static int hisi_sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) ret = hisi_qm_start(qm); if (ret) { pci_err(pdev, "Failed to start qm (%d)!\n", ret); - goto err_qm_uninit; + goto err_probe_uninit; } - ret = hisi_sec_debugfs_init(qm); + ret = sec_debugfs_init(qm); if (ret) pci_warn(pdev, "Failed to init debugfs (%d)!\n", ret); hisi_qm_add_to_list(qm, &sec_devices); - ret = hisi_sec_register_to_crypto(fusion_limit); + ret = sec_register_to_crypto(); if (ret < 0) { - pci_err(pdev, "Failed to register driver to crypto!\n"); + pr_err("Failed to register driver to crypto!\n"); goto err_remove_from_list; } @@ -994,121 +877,115 @@ static int hisi_sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) return 0; err_crypto_unregister: - hisi_sec_unregister_from_crypto(fusion_limit); + sec_unregister_from_crypto(); err_remove_from_list: hisi_qm_del_from_list(qm, &sec_devices); - hisi_sec_debugfs_exit(qm); + sec_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); +err_probe_uninit: + sec_probe_uninit(qm); + err_qm_uninit: hisi_qm_uninit(qm); return ret; } -static int hisi_sec_sriov_configure(struct pci_dev *pdev, int num_vfs) +static int sec_sriov_configure(struct pci_dev *pdev, int num_vfs) { - if (num_vfs == 0) - return hisi_qm_sriov_disable(pdev, &sec_devices); - else + if (num_vfs) return hisi_qm_sriov_enable(pdev, num_vfs); + else + return hisi_qm_sriov_disable(pdev, &sec_devices); } -static void hisi_sec_remove(struct pci_dev *pdev) +static void sec_remove(struct pci_dev *pdev) { struct hisi_qm *qm = pci_get_drvdata(pdev); - if (uacce_mode != UACCE_MODE_NOUACCE) - hisi_qm_remove_wait_delay(qm, &sec_devices); + hisi_qm_remove_wait_delay(qm, &sec_devices); + + sec_unregister_from_crypto(); + + hisi_qm_del_from_list(qm, &sec_devices); if (qm->fun_type == QM_HW_PF && qm->vfs_num) (void)hisi_qm_sriov_disable(pdev, NULL); - hisi_sec_unregister_from_crypto(fusion_limit); + sec_debugfs_exit(qm); - hisi_qm_del_from_list(qm, &sec_devices); - hisi_sec_debugfs_exit(qm); (void)hisi_qm_stop(qm, QM_NORMAL); if (qm->fun_type == QM_HW_PF) - hisi_qm_dev_err_uninit(qm); + sec_debug_regs_clear(qm); + + sec_probe_uninit(qm); hisi_qm_uninit(qm); } -static const struct pci_error_handlers hisi_sec_err_handler = { +static const struct pci_error_handlers sec_err_handler = { .error_detected = hisi_qm_dev_err_detected, - .slot_reset = hisi_qm_dev_slot_reset, - .reset_prepare = hisi_qm_reset_prepare, - .reset_done = hisi_qm_reset_done, + .slot_reset = hisi_qm_dev_slot_reset, + .reset_prepare = hisi_qm_reset_prepare, + .reset_done = hisi_qm_reset_done, }; -static struct pci_driver hisi_sec_pci_driver = { +static struct pci_driver sec_pci_driver = { .name = "hisi_sec2", - .id_table = hisi_sec_dev_ids, - .probe = hisi_sec_probe, - .remove = hisi_sec_remove, - .sriov_configure = hisi_sec_sriov_configure, - .err_handler = &hisi_sec_err_handler, + .id_table = sec_dev_ids, + .probe = sec_probe, + .remove = sec_remove, + .err_handler = &sec_err_handler, + .sriov_configure = sec_sriov_configure, .shutdown = hisi_qm_dev_shutdown, }; -static void hisi_sec_register_debugfs(void) +static void sec_register_debugfs(void) { if (!debugfs_initialized()) return; sec_debugfs_root = debugfs_create_dir("hisi_sec2", NULL); - if (IS_ERR_OR_NULL(sec_debugfs_root)) - sec_debugfs_root = NULL; } -static void hisi_sec_unregister_debugfs(void) +static void sec_unregister_debugfs(void) { debugfs_remove_recursive(sec_debugfs_root); } -static int __init hisi_sec_init(void) +static int __init sec_init(void) { int ret; - sec_wq = alloc_workqueue("hisi_sec2", WQ_HIGHPRI | WQ_CPU_INTENSIVE | - WQ_MEM_RECLAIM | WQ_UNBOUND, num_online_cpus()); - - if (!sec_wq) { - pr_err("Fallied to alloc workqueue\n"); - return -ENOMEM; - } - INIT_LIST_HEAD(&sec_devices.list); mutex_init(&sec_devices.lock); sec_devices.check = NULL; + sec_register_debugfs(); - hisi_sec_register_debugfs(); - - ret = pci_register_driver(&hisi_sec_pci_driver); + ret = pci_register_driver(&sec_pci_driver); if (ret < 0) { - hisi_sec_unregister_debugfs(); - if (sec_wq) - destroy_workqueue(sec_wq); + sec_unregister_debugfs(); pr_err("Failed to register pci driver.\n"); + return ret; } - return ret; + return 0; } -static void __exit hisi_sec_exit(void) +static void __exit sec_exit(void) { - pci_unregister_driver(&hisi_sec_pci_driver); - hisi_sec_unregister_debugfs(); - if (sec_wq) - destroy_workqueue(sec_wq); + pci_unregister_driver(&sec_pci_driver); + sec_unregister_debugfs(); } -module_init(hisi_sec_init); -module_exit(hisi_sec_exit); +module_init(sec_init); +module_exit(sec_exit); MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Zaibo Xu <xuzaibo(a)huawei.com>"); +MODULE_AUTHOR("Longfang Liu <liulongfang(a)huawei.com>"); MODULE_AUTHOR("Zhang Wei <zhangwei375(a)huawei.com>"); MODULE_DESCRIPTION("Driver for HiSilicon SEC accelerator"); diff --git a/drivers/crypto/hisilicon/sec2/sec_usr_if.h b/drivers/crypto/hisilicon/sec2/sec_usr_if.h deleted file mode 100644 index 7c76e19..00000000 --- a/drivers/crypto/hisilicon/sec2/sec_usr_if.h +++ /dev/null @@ -1,179 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* Copyright (c) 2018-2019 HiSilicon Limited. */ - -#ifndef HISI_SEC_USR_IF_H -#define HISI_SEC_USR_IF_H - -struct hisi_sec_sqe_type1 { - __u32 rsvd2:6; - __u32 ci_gen:2; - __u32 ai_gen:2; - __u32 rsvd1:7; - __u32 c_key_type:2; - __u32 a_key_type:2; - __u32 rsvd0:10; - __u32 inveld:1; - - __u32 mac_len:6; - __u32 a_key_len:5; - __u32 a_alg:6; - __u32 rsvd3:15; - __u32 c_icv_len:6; - __u32 c_width:3; - __u32 c_key_len:3; - __u32 c_mode:4; - __u32 c_alg:4; - __u32 rsvd4:12; - __u32 auth_gran_size:24; - __u32:8; - __u32 cipher_gran_size:24; - __u32:8; - __u32 auth_src_offset:16; - __u32 cipher_src_offset:16; - __u32 gran_num:16; - __u32 rsvd5:16; - __u32 src_skip_data_len:24; - __u32 rsvd6:8; - __u32 dst_skip_data_len:24; - __u32 rsvd7:8; - __u32 tag:16; - __u32 rsvd8:16; - __u32 gen_page_pad_ctrl:4; - __u32 gen_grd_ctrl:4; - __u32 gen_ver_ctrl:4; - __u32 gen_app_ctrl:4; - __u32 gen_ver_val:8; - __u32 gen_app_val:8; - __u32 private_info; - __u32 gen_ref_ctrl:4; - __u32 page_pad_type:2; - __u32 rsvd9:2; - __u32 chk_grd_ctrl:4; - __u32 chk_ref_ctrl:4; - __u32 block_size:16; - __u32 lba_l; - __u32 lba_h; - __u32 a_key_addr_l; - __u32 a_key_addr_h; - __u32 mac_addr_l; - __u32 mac_addr_h; - __u32 c_ivin_addr_l; - __u32 c_ivin_addr_h; - __u32 c_key_addr_l; - __u32 c_key_addr_h; - __u32 data_src_addr_l; - __u32 data_src_addr_h; - __u32 data_dst_addr_l; - __u32 data_dst_addr_h; - __u32 done:1; - __u32 icv:3; - __u32 rsvd11:3; - __u32 flag:4; - __u32 dif_check:3; - __u32 rsvd10:2; - __u32 error_type:8; - __u32 warning_type:8; - __u32 dw29; - __u32 dw30; - __u32 dw31; -}; - -struct hisi_sec_sqe_type2 { - __u32 nonce_len:4; - __u32 huk:1; - __u32 key_s:1; - __u32 ci_gen:2; - __u32 ai_gen:2; - __u32 a_pad:2; - __u32 c_s:2; - __u32 rsvd1:2; - __u32 rhf:1; - __u32 c_key_type:2; - __u32 a_key_type:2; - __u32 write_frame_len:3; - __u32 cal_iv_addr_en:1; - __u32 tls_up:1; - __u32 rsvd0:5; - __u32 inveld:1; - __u32 mac_len:5; - __u32 a_key_len:6; - __u32 a_alg:6; - __u32 rsvd3:15; - __u32 c_icv_len:6; - __u32 c_width:3; - __u32 c_key_len:3; - __u32 c_mode:4; - __u32 c_alg:4; - __u32 rsvd4:12; - __u32 a_len:24; - __u32 iv_offset_l:8; - __u32 c_len:24; - __u32 iv_offset_h:8; - __u32 auth_src_offset:16; - __u32 cipher_src_offset:16; - __u32 cs_ip_header_offset:16; - __u32 cs_udp_header_offset:16; - __u32 pass_word_len:16; - __u32 dk_len:16; - __u32 salt3:8; - __u32 salt2:8; - __u32 salt1:8; - __u32 salt0:8; - __u32 tag:16; - __u32 rsvd5:16; - __u32 c_pad_type:4; - __u32 c_pad_len:8; - __u32 c_pad_data_type:4; - __u32 c_pad_len_field:2; - __u32 rsvd6:14; - __u32 long_a_data_len_l; - __u32 long_a_data_len_h; - __u32 a_ivin_addr_l; - __u32 a_ivin_addr_h; - __u32 a_key_addr_l; - __u32 a_key_addr_h; - __u32 mac_addr_l; - __u32 mac_addr_h; - __u32 c_ivin_addr_l; - __u32 c_ivin_addr_h; - __u32 c_key_addr_l; - __u32 c_key_addr_h; - __u32 data_src_addr_l; - __u32 data_src_addr_h; - __u32 data_dst_addr_l; - __u32 data_dst_addr_h; - __u32 done:1; - __u32 icv:3; - __u32 rsvd11:3; - __u32 flag:4; - __u32 rsvd10:5; - __u32 error_type:8; - __u32 warning_type:8; - __u32 mac_i3:8; - __u32 mac_i2:8; - __u32 mac_i1:8; - __u32 mac_i0:8; - __u32 check_sum_i:16; - __u32 tls_pad_len_i:8; - __u32 rsvd12:8; - __u32 counter; -}; - -struct hisi_sec_sqe { - __u32 type:4; - __u32 cipher:2; - __u32 auth:2; - __u32 seq:1; - __u32 de:2; - __u32 scene:4; - __u32 src_addr_type:3; - __u32 dst_addr_type:3; - __u32 mac_addr_type:3; - __u32 rsvd0:8; - union { - struct hisi_sec_sqe_type1 type1; - struct hisi_sec_sqe_type2 type2; - }; -}; - -#endif -- 1.8.3

1 1

[PATCH] arm64: kprobes: Recover pstate.D in single-step exception handler
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Masami Hiramatsu <mhiramat(a)kernel.org> mainline inclusion from mainline-5.3-rc3 commit b3980e48528c category: bugfix bugzilla: 20080 CVE: NA ------------------------------------------------- kprobes manipulates the interrupted PSTATE for single step, and doesn't restore it. Thus, if we put a kprobe where the pstate.D (debug) masked, the mask will be cleared after the kprobe hits. Moreover, in the most complicated case, this can lead a kernel crash with below message when a nested kprobe hits. [ 152.118921] Unexpected kernel single-step exception at EL1 When the 1st kprobe hits, do_debug_exception() will be called. At this point, debug exception (= pstate.D) must be masked (=1). But if another kprobes hits before single-step of the first kprobe (e.g. inside user pre_handler), it unmask the debug exception (pstate.D = 0) and return. Then, when the 1st kprobe setting up single-step, it saves current DAIF, mask DAIF, enable single-step, and restore DAIF. However, since "D" flag in DAIF is cleared by the 2nd kprobe, the single-step exception happens soon after restoring DAIF. This has been introduced by commit 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler") To solve this issue, this stores all DAIF bits and restore it after single stepping. Reported-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Fixes: 7419333fa15e ("arm64: kprobe: Always clear pstate.D in breakpoint exception handler") Reviewed-by: James Morse <james.morse(a)arm.com> Tested-by: James Morse <james.morse(a)arm.com> Signed-off-by: Masami Hiramatsu <mhiramat(a)kernel.org> Signed-off-by: Will Deacon <will(a)kernel.org> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/include/asm/daifflags.h | 1 + arch/arm64/kernel/probes/kprobes.c | 40 ++++++-------------------------------- 2 files changed, 7 insertions(+), 34 deletions(-) diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h index 3441ca0..1230923 100644 --- a/arch/arm64/include/asm/daifflags.h +++ b/arch/arm64/include/asm/daifflags.h @@ -24,6 +24,7 @@ #define DAIF_PROCCTX 0 #define DAIF_PROCCTX_NOIRQ PSR_I_BIT +#define DAIF_MASK (PSR_D_BIT | PSR_A_BIT | PSR_I_BIT | PSR_F_BIT) /* mask/save/unmask/restore all exceptions, including interrupts. */ static inline void local_daif_mask(void) diff --git a/arch/arm64/kernel/probes/kprobes.c b/arch/arm64/kernel/probes/kprobes.c index 2d63df1..fe9d207 100644 --- a/arch/arm64/kernel/probes/kprobes.c +++ b/arch/arm64/kernel/probes/kprobes.c @@ -30,6 +30,7 @@ #include <asm/ptrace.h> #include <asm/cacheflush.h> #include <asm/debug-monitors.h> +#include <asm/daifflags.h> #include <asm/system_misc.h> #include <asm/insn.h> #include <linux/uaccess.h> @@ -180,33 +181,6 @@ static void __kprobes set_current_kprobe(struct kprobe *p) } /* - * When PSTATE.D is set (masked), then software step exceptions can not be - * generated. - * SPSR's D bit shows the value of PSTATE.D immediately before the - * exception was taken. PSTATE.D is set while entering into any exception - * mode, however software clears it for any normal (none-debug-exception) - * mode in the exception entry. Therefore, when we are entering into kprobe - * breakpoint handler from any normal mode then SPSR.D bit is already - * cleared, however it is set when we are entering from any debug exception - * mode. - * Since we always need to generate single step exception after a kprobe - * breakpoint exception therefore we need to clear it unconditionally, when - * we become sure that the current breakpoint exception is for kprobe. - */ -static void __kprobes -spsr_set_debug_flag(struct pt_regs *regs, int mask) -{ - unsigned long spsr = regs->pstate; - - if (mask) - spsr |= PSR_D_BIT; - else - spsr &= ~PSR_D_BIT; - - regs->pstate = spsr; -} - -/* * Interrupts need to be disabled before single-step mode is set, and not * reenabled until after single-step mode ends. * Without disabling interrupt on local CPU, there is a chance of @@ -217,17 +191,17 @@ static void __kprobes set_current_kprobe(struct kprobe *p) static void __kprobes kprobes_save_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - kcb->saved_irqflag = regs->pstate; + kcb->saved_irqflag = regs->pstate & DAIF_MASK; regs->pstate |= PSR_I_BIT; + /* Unmask PSTATE.D for enabling software step exceptions. */ + regs->pstate &= ~PSR_D_BIT; } static void __kprobes kprobes_restore_local_irqflag(struct kprobe_ctlblk *kcb, struct pt_regs *regs) { - if (kcb->saved_irqflag & PSR_I_BIT) - regs->pstate |= PSR_I_BIT; - else - regs->pstate &= ~PSR_I_BIT; + regs->pstate &= ~DAIF_MASK; + regs->pstate |= kcb->saved_irqflag; } static void __kprobes @@ -264,8 +238,6 @@ static void __kprobes setup_singlestep(struct kprobe *p, set_ss_context(kcb, slot); /* mark pending ss */ - spsr_set_debug_flag(regs, 0); - /* IRQs and single stepping do not mix well. */ kprobes_save_local_irqflag(kcb, regs); kernel_enable_single_step(regs); -- 1.8.3

1 0

[PATCH 1/2] qm: optimize the maximum number of VF and delete invalid addr
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA In this patch, we try to optimize the way to set the maximum number of VF, which is designed for compation with next hardware standards. Then we remove invalid address parameter definition and assignment. Meanwhile, the return code judgment of debugfs related functions is deleted, because this does not affect the main function of driver. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Cheng Hu <hucheng.hu(a)huawei.com> Reviewed-by: Guangwei Zhou <zhouguangwei5(a)huawei.com> Reviewed-by: Junxian Liu <liujunxian3(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/hpre/hpre.h | 1 - drivers/crypto/hisilicon/hpre/hpre_main.c | 54 ++++++++++++++----------------- drivers/crypto/hisilicon/qm.c | 22 ++++--------- drivers/crypto/hisilicon/qm.h | 6 ++-- drivers/crypto/hisilicon/rde/rde_main.c | 2 ++ drivers/crypto/hisilicon/zip/zip_main.c | 2 ++ 6 files changed, 38 insertions(+), 49 deletions(-) diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h index 3ac02ef..42b2f2a 100644 --- a/drivers/crypto/hisilicon/hpre/hpre.h +++ b/drivers/crypto/hisilicon/hpre/hpre.h @@ -18,7 +18,6 @@ enum { HPRE_CLUSTERS_NUM, }; - enum hpre_ctrl_dbgfs_file { HPRE_CURRENT_QM, HPRE_CLEAR_ENABLE, diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index 4dc0d3e..f727158 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -435,8 +435,7 @@ static int hpre_current_qm_write(struct hpre_debugfs_file *file, u32 val) vfq_num = (qm->ctrl_q_num - qm->qp_num) / num_vfs; if (val == num_vfs) { qm->debug.curr_qm_qp_num = - qm->ctrl_q_num - qm->qp_num - - (num_vfs - 1) * vfq_num; + qm->ctrl_q_num - qm->qp_num - (num_vfs - 1) * vfq_num; } else { qm->debug.curr_qm_qp_num = vfq_num; } @@ -592,7 +591,7 @@ static ssize_t hpre_ctrl_debug_write(struct file *filp, const char __user *buf, static int hpre_create_debugfs_file(struct hpre_debug *dbg, struct dentry *dir, enum hpre_ctrl_dbgfs_file type, int indx) { - struct dentry *tmp, *file_dir; + struct dentry *file_dir; struct hpre *hpre; if (dir) { @@ -609,10 +608,9 @@ static int hpre_create_debugfs_file(struct hpre_debug *dbg, struct dentry *dir, dbg->files[indx].debug = dbg; dbg->files[indx].type = type; dbg->files[indx].index = indx; - tmp = debugfs_create_file(hpre_debug_file_name[type], 0600, file_dir, - dbg->files + indx, &hpre_ctrl_debug_fops); - if (!tmp) - return -ENOENT; + + debugfs_create_file(hpre_debug_file_name[type], 0600, file_dir, + dbg->files + indx, &hpre_ctrl_debug_fops); return 0; } @@ -623,7 +621,6 @@ static int hpre_pf_comm_regs_debugfs_init(struct hpre_debug *debug) struct hisi_qm *qm = &hpre->qm; struct device *dev = &qm->pdev->dev; struct debugfs_regset32 *regset; - struct dentry *tmp; regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); if (!regset) @@ -633,11 +630,7 @@ static int hpre_pf_comm_regs_debugfs_init(struct hpre_debug *debug) regset->nregs = ARRAY_SIZE(hpre_com_dfx_regs); regset->base = qm->io_base; - tmp = debugfs_create_regset32("regs", 0444, qm->debug.debug_root, - regset); - if (!tmp) - return -ENOENT; - + debugfs_create_regset32("regs", 0444, qm->debug.debug_root, regset); return 0; } @@ -648,7 +641,7 @@ static int hpre_cluster_debugfs_init(struct hpre_debug *debug) struct device *dev = &qm->pdev->dev; char buf[HPRE_DBGFS_VAL_MAX_LEN]; struct debugfs_regset32 *regset; - struct dentry *tmp_d, *tmp; + struct dentry *tmp_d; int i, ret; for (i = 0; i < HPRE_CLUSTERS_NUM; i++) { @@ -657,8 +650,6 @@ static int hpre_cluster_debugfs_init(struct hpre_debug *debug) return -EINVAL; tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); - if (!tmp_d) - return -ENOENT; regset = devm_kzalloc(dev, sizeof(*regset), GFP_KERNEL); if (!regset) @@ -668,9 +659,8 @@ static int hpre_cluster_debugfs_init(struct hpre_debug *debug) regset->nregs = ARRAY_SIZE(hpre_cluster_dfx_regs); regset->base = qm->io_base + hpre_cluster_offsets[i]; - tmp = debugfs_create_regset32("regs", 0444, tmp_d, regset); - if (!tmp) - return -ENOENT; + debugfs_create_regset32("regs", 0444, tmp_d, regset); + ret = hpre_create_debugfs_file(debug, tmp_d, HPRE_CLUSTER_CTRL, i + HPRE_CLUSTER_CTRL); if (ret) @@ -705,14 +695,10 @@ static int hpre_debugfs_init(struct hisi_qm *qm) { struct hpre *hpre = container_of(qm, struct hpre, qm); struct device *dev = &qm->pdev->dev; - struct dentry *dir; int ret; - dir = debugfs_create_dir(dev_name(dev), hpre_debugfs_root); - if (!dir) - return -ENOENT; - - qm->debug.debug_root = dir; + qm->debug.debug_root = debugfs_create_dir(dev_name(dev), + hpre_debugfs_root); ret = hisi_qm_debug_init(qm); if (ret) @@ -730,6 +716,11 @@ static int hpre_debugfs_init(struct hisi_qm *qm) return ret; } +static void hpre_debugfs_exit(struct hisi_qm *qm) +{ + debugfs_remove_recursive(qm->debug.debug_root); +} + static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) { int ret; @@ -929,7 +920,8 @@ static void hpre_remove(struct pci_dev *pdev) hpre_cnt_regs_clear(qm); qm->debug.curr_qm_qp_num = 0; } - debugfs_remove_recursive(qm->debug.debug_root); + + hpre_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); if (qm->fun_type == QM_HW_PF) @@ -967,19 +959,23 @@ static void hpre_register_debugfs(void) hpre_debugfs_root = NULL; } +static void hpre_unregister_debugfs(void) +{ + debugfs_remove_recursive(hpre_debugfs_root); +} + static int __init hpre_init(void) { int ret; INIT_LIST_HEAD(&hpre_devices.list); mutex_init(&hpre_devices.lock); - hpre_devices.check = NULL; hpre_register_debugfs(); ret = pci_register_driver(&hpre_pci_driver); if (ret) { - debugfs_remove_recursive(hpre_debugfs_root); + hpre_unregister_debugfs(); pr_err("hpre: can't register hisi hpre driver.\n"); } @@ -989,7 +985,7 @@ static int __init hpre_init(void) static void __exit hpre_exit(void) { pci_unregister_driver(&hpre_pci_driver); - debugfs_remove_recursive(hpre_debugfs_root); + hpre_unregister_debugfs(); } module_init(hpre_init); diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 6a5337a..d3429e7 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -1428,6 +1428,7 @@ static int qm_cq_ctx_cfg(struct hisi_qp *qp, int qp_id, int pasid) qp->c_flag << QM_CQ_FLAG_SHIFT); ret = qm_mb(qm, QM_MB_CMD_CQC, cqc_dma, qp_id, 0); + dma_unmap_single(dev, cqc_dma, sizeof(struct qm_cqc), DMA_TO_DEVICE); kfree(cqc); @@ -2330,6 +2331,7 @@ static int qm_aeq_ctx_cfg(struct hisi_qm *qm) aeqc->base_h = cpu_to_le32(upper_32_bits(qm->aeqe_dma)); aeqc->dw6 = cpu_to_le32((QM_Q_DEPTH - 1) | (1 << QM_EQC_PHASE_SHIFT)); ret = qm_mb(qm, QM_MB_CMD_AEQC, aeqc_dma, 0, 0); + dma_unmap_single(dev, aeqc_dma, sizeof(struct qm_aeqc), DMA_TO_DEVICE); kfree(aeqc); @@ -2384,13 +2386,6 @@ static int __hisi_qm_start(struct hisi_qm *qm) QM_INIT_BUF(qm, sqc, qm->qp_num); QM_INIT_BUF(qm, cqc, qm->qp_num); -#ifdef CONFIG_CRYPTO_QM_UACCE - /* get reserved dma memory */ - qm->reserve = qm->qdma.va + off; - qm->reserve_dma = qm->qdma.dma + off; - off += PAGE_SIZE; -#endif - ret = qm_eq_aeq_ctx_cfg(qm); if (ret) return ret; @@ -2681,7 +2676,7 @@ void hisi_qm_debug_regs_clear(struct hisi_qm *qm) */ int hisi_qm_debug_init(struct hisi_qm *qm) { - struct dentry *qm_d, *qm_regs; + struct dentry *qm_d; int i, ret; qm_d = debugfs_create_dir("qm", qm->debug.debug_root); @@ -2697,12 +2692,7 @@ int hisi_qm_debug_init(struct hisi_qm *qm) goto failed_to_create; } - qm_regs = debugfs_create_file("regs", 0444, qm->debug.qm_d, qm, - &qm_regs_fops); - if (IS_ERR(qm_regs)) { - ret = -ENOENT; - goto failed_to_create; - } + debugfs_create_file("regs", 0444, qm->debug.qm_d, qm, &qm_regs_fops); return 0; @@ -3038,7 +3028,9 @@ int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs) { struct hisi_qm *qm = pci_get_drvdata(pdev); int pre_existing_vfs, num_vfs, ret; + int total_vfs; + total_vfs = pci_sriov_get_totalvfs(pdev); pre_existing_vfs = pci_num_vf(pdev); if (pre_existing_vfs) { pci_err(pdev, @@ -3046,7 +3038,7 @@ int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs) return 0; } - num_vfs = min_t(int, max_vfs, QM_MAX_VFS_NUM); + num_vfs = min_t(int, max_vfs, total_vfs); ret = qm_vf_q_assign(qm, num_vfs); if (ret) { pci_err(pdev, "Can't assign queues for VF!\n"); diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h index 36e888f..79e29ee 100644 --- a/drivers/crypto/hisilicon/qm.h +++ b/drivers/crypto/hisilicon/qm.h @@ -19,7 +19,7 @@ #define QNUM_V1 4096 #define QNUM_V2 1024 -#define QM_MAX_VFS_NUM 63 +#define QM_MAX_VFS_NUM_V2 63 /* qm user domain */ #define QM_ARUSER_M_CFG_1 0x100088 #define AXUSER_SNOOP_ENABLE BIT(30) @@ -322,9 +322,7 @@ struct hisi_qm { resource_size_t size; struct uacce uacce; const char *algs; - void *reserve; int uacce_mode; - dma_addr_t reserve_dma; #endif struct workqueue_struct *wq; struct work_struct work; @@ -423,7 +421,7 @@ static inline int vf_num_set(const char *val, const struct kernel_param *kp) if (ret < 0) return ret; - if (n > QM_MAX_VFS_NUM) + if (n > QM_MAX_VFS_NUM_V2) return -ERANGE; return param_set_int(val, kp); diff --git a/drivers/crypto/hisilicon/rde/rde_main.c b/drivers/crypto/hisilicon/rde/rde_main.c index 318d4a0..946532f 100644 --- a/drivers/crypto/hisilicon/rde/rde_main.c +++ b/drivers/crypto/hisilicon/rde/rde_main.c @@ -13,6 +13,7 @@ #include <linux/bitops.h> #include <linux/debugfs.h> #include <linux/init.h> +#include <linux/iommu.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> @@ -20,6 +21,7 @@ #include <linux/seq_file.h> #include <linux/topology.h> #include <linux/uacce.h> + #include "rde.h" #define HRDE_QUEUE_NUM_V1 4096 diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index 54681dc..83e2869 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -858,8 +858,10 @@ static void hisi_zip_remove(struct pci_dev *pdev) { struct hisi_qm *qm = pci_get_drvdata(pdev); +#ifdef CONFIG_CRYPTO_QM_UACCE if (uacce_mode != UACCE_MODE_NOUACCE) hisi_qm_remove_wait_delay(qm, &zip_devices); +#endif if (qm->fun_type == QM_HW_PF && qm->vfs_num) hisi_qm_sriov_disable(pdev, NULL); -- 1.8.3

1 1

[PATCH 1/4] Revert "dm crypt: use WQ_HIGHPRI for the IO and crypt workqueues"
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Mike Snitzer <snitzer(a)redhat.com> mainline inclusion from mainline-5.5-rc1 commit f612b2132db529feac4f965f28a1b9258ea7c22b category: bugfix bugzilla: 25149 CVE: NA --------------------------- This reverts commit a1b89132dc4f61071bdeaab92ea958e0953380a1. Revert required hand-patching due to subsequent changes that were applied since commit a1b89132dc4f61071bdeaab92ea958e0953380a1. Requires: ed0302e83098d ("dm crypt: make workqueue names device-specific") Cc: stable(a)vger.kernel.org Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199857 Reported-by: Vito Caputo <vcaputo(a)pengaru.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Sun Ke <sunke32(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/md/dm-crypt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index f68b9bd..d451f98 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -3996,17 +3996,16 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) } ret = -ENOMEM; - cc->io_queue = alloc_workqueue("kcryptd_io", WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, 1); + cc->io_queue = alloc_workqueue("kcryptd_io", WQ_MEM_RECLAIM, 1); if (!cc->io_queue) { ti->error = "Couldn't create kcryptd io queue"; goto bad; } if (test_bit(DM_CRYPT_SAME_CPU, &cc->flags)) - cc->crypt_queue = alloc_workqueue("kcryptd", WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, 1); + cc->crypt_queue = alloc_workqueue("kcryptd", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM, 1); else - cc->crypt_queue = alloc_workqueue("kcryptd", - WQ_HIGHPRI | WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND, + cc->crypt_queue = alloc_workqueue("kcryptd", WQ_CPU_INTENSIVE | WQ_MEM_RECLAIM | WQ_UNBOUND, num_online_cpus()); if (!cc->crypt_queue) { ti->error = "Couldn't create kcryptd queue"; -- 1.8.3

1 3

[PATCH] ACPICA: Win OSL: Replace get_tick_count with get_tick_count64
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Bob Moore <robert.moore(a)intel.com> mainline inclusion from mainline-v5.5-rc1 commit 197aba2090e3 category: bugfix bugzilla: 25975 CVE: NA ------------------------------------------------- ACPICA commit 7bc16c650317001bc82d4bae227b888a49c51f5e Avoid possible overflow from get_tick_count. Also, cast math using ACPI_100NSEC_PER_MSEC to uint64. Link: https://github.com/acpica/acpica/commit/7bc16c65 Signed-off-by: Bob Moore <robert.moore(a)intel.com> Signed-off-by: Erik Schmauss <erik.schmauss(a)intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/acpi/acpica/dscontrol.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c index 0da9626..ebaa74d 100644 --- a/drivers/acpi/acpica/dscontrol.c +++ b/drivers/acpi/acpica/dscontrol.c @@ -85,7 +85,7 @@ walk_state->parser_state.pkg_end; control_state->control.opcode = op->common.aml_opcode; control_state->control.loop_timeout = acpi_os_get_timer() + - (u64)(acpi_gbl_max_loop_iterations * ACPI_100NSEC_PER_SEC); + ((u64)acpi_gbl_max_loop_iterations * ACPI_100NSEC_PER_SEC); /* Push the control state on this walk's control stack */ -- 1.8.3

1 0

[PATCH 001/276] core: Don't skip generic XDP program execution for cloned SKBs
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Toke Høiland-Jørgensen <toke(a)redhat.com> [ Upstream commit ad1e03b2b3d4430baaa109b77bc308dc73050de3 ] The current generic XDP handler skips execution of XDP programs entirely if an SKB is marked as cloned. This leads to some surprising behaviour, as packets can end up being cloned in various ways, which will make an XDP program not see all the traffic on an interface. This was discovered by a simple test case where an XDP program that always returns XDP_DROP is installed on a veth device. When combining this with the Scapy packet sniffer (which uses an AF_PACKET) socket on the sending side, SKBs reliably end up in the cloned state, causing them to be passed through to the receiving interface instead of being dropped. A minimal reproducer script for this is included below. This patch fixed the issue by simply triggering the existing linearisation code for cloned SKBs instead of skipping the XDP program execution. This behaviour is in line with the behaviour of the native XDP implementation for the veth driver, which will reallocate and copy the SKB data if the SKB is marked as shared. Reproducer Python script (requires BCC and Scapy): from scapy.all import TCP, IP, Ether, sendp, sniff, AsyncSniffer, Raw, UDP from bcc import BPF import time, sys, subprocess, shlex SKB_MODE = (1 << 1) DRV_MODE = (1 << 2) PYTHON=sys.executable def client(): time.sleep(2) # Sniffing on the sender causes skb_cloned() to be set s = AsyncSniffer() s.start() for p in range(10): sendp(Ether(dst="aa:aa:aa:aa:aa:aa", src="cc:cc:cc:cc:cc:cc")/IP()/UDP()/Raw("Test"), verbose=False) time.sleep(0.1) s.stop() return 0 def server(mode): prog = BPF(text="int dummy_drop(struct xdp_md *ctx) {return XDP_DROP;}") func = prog.load_func("dummy_drop", BPF.XDP) prog.attach_xdp("a_to_b", func, mode) time.sleep(1) s = sniff(iface="a_to_b", count=10, timeout=15) if len(s): print(f"Got {len(s)} packets - should have gotten 0") return 1 else: print("Got no packets - as expected") return 0 if len(sys.argv) < 2: print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) if sys.argv[1] == "client": sys.exit(client()) elif sys.argv[1] == "server": mode = SKB_MODE if sys.argv[2] == 'skb' else DRV_MODE sys.exit(server(mode)) else: try: mode = sys.argv[1] if mode not in ('skb', 'drv'): print(f"Usage: {sys.argv[0]} <skb|drv>") sys.exit(1) print(f"Running in {mode} mode") for cmd in [ 'ip netns add netns_a', 'ip netns add netns_b', 'ip -n netns_a link add a_to_b type veth peer name b_to_a netns netns_b', # Disable ipv6 to make sure there's no address autoconf traffic 'ip netns exec netns_a sysctl -qw net.ipv6.conf.a_to_b.disable_ipv6=1', 'ip netns exec netns_b sysctl -qw net.ipv6.conf.b_to_a.disable_ipv6=1', 'ip -n netns_a link set dev a_to_b address aa:aa:aa:aa:aa:aa', 'ip -n netns_b link set dev b_to_a address cc:cc:cc:cc:cc:cc', 'ip -n netns_a link set dev a_to_b up', 'ip -n netns_b link set dev b_to_a up']: subprocess.check_call(shlex.split(cmd)) server = subprocess.Popen(shlex.split(f"ip netns exec netns_a {PYTHON} {sys.argv[0]} server {mode}")) client = subprocess.Popen(shlex.split(f"ip netns exec netns_b {PYTHON} {sys.argv[0]} client")) client.wait() server.wait() sys.exit(server.returncode) finally: subprocess.run(shlex.split("ip netns delete netns_a")) subprocess.run(shlex.split("ip netns delete netns_b")) Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices") Reported-by: Stepan Horacek <shoracek(a)redhat.com> Suggested-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Toke Høiland-Jørgensen <toke(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/core/dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/core/dev.c b/net/core/dev.c index 1c0224e..c1a3baf 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4306,14 +4306,14 @@ static u32 netif_receive_generic_xdp(struct sk_buff *skb, /* Reinjected packets coming from act_mirred or similar should * not get XDP generic processing. */ - if (skb_cloned(skb) || skb_is_tc_redirected(skb)) + if (skb_is_tc_redirected(skb)) return XDP_PASS; /* XDP packets must be linear and must have sufficient headroom * of XDP_PACKET_HEADROOM bytes. This is the guarantee that also * native XDP provides, thus we need to do it here as well. */ - if (skb_is_nonlinear(skb) || + if (skb_cloned(skb) || skb_is_nonlinear(skb) || skb_headroom(skb) < XDP_PACKET_HEADROOM) { int hroom = XDP_PACKET_HEADROOM - skb_headroom(skb); int troom = skb->tail + skb->data_len - skb->end; -- 1.8.3

1 275

[PATCH 1/2] cgroup: saner refcounting for cgroup_root
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Al Viro <viro(a)zeniv.linux.org.uk> mainline inclusion from mainline-5.1-rc1 commit 35ac1184244f1329783e1d897f74926d8bb1103a category: bugfix bugzilla: 30217 CVE: NA --------------------------- * make the reference from superblock to cgroup_root counting - do cgroup_put() in cgroup_kill_sb() whether we'd done percpu_ref_kill() or not; matching grab is done when we allocate a new root. That gives the same refcounting rules for all callers of cgroup_do_mount() - a reference to cgroup_root has been grabbed by caller and it either is transferred to new superblock or dropped. * have cgroup_kill_sb() treat an already killed refcount as "just don't bother killing it, then". * after successful cgroup_do_mount() have cgroup1_mount() recheck if we'd raced with mount/umount from somebody else and cgroup_root got killed. In that case we drop the superblock and bugger off with -ERESTARTSYS, same as if we'd found it in the list already dying. * don't bother with delayed initialization of refcount - it's unreliable and not needed. No need to prevent attempts to bump the refcount if we find cgroup_root of another mount in progress - sget will reuse an existing superblock just fine and if the other sb manages to die before we get there, we'll catch that immediately after cgroup_do_mount(). * don't bother with kernfs_pin_sb() - no need for doing that either. Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> Signed-off-by: yangerkun <yangerkun(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/cgroup/cgroup-internal.h | 2 +- kernel/cgroup/cgroup-v1.c | 58 +++++++++-------------------------------- kernel/cgroup/cgroup.c | 16 +++++------- 3 files changed, 21 insertions(+), 55 deletions(-) diff --git a/kernel/cgroup/cgroup-internal.h b/kernel/cgroup/cgroup-internal.h index 75568fc..6f02be1 100644 --- a/kernel/cgroup/cgroup-internal.h +++ b/kernel/cgroup/cgroup-internal.h @@ -196,7 +196,7 @@ int cgroup_path_ns_locked(struct cgroup *cgrp, char *buf, size_t buflen, void cgroup_free_root(struct cgroup_root *root); void init_cgroup_root(struct cgroup_root *root, struct cgroup_sb_opts *opts); -int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask, int ref_flags); +int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask); int rebind_subsystems(struct cgroup_root *dst_root, u16 ss_mask); struct dentry *cgroup_do_mount(struct file_system_type *fs_type, int flags, struct cgroup_root *root, unsigned long magic, diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index ff3e1aa..e66bb45 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -1112,13 +1112,11 @@ struct dentry *cgroup1_mount(struct file_system_type *fs_type, int flags, void *data, unsigned long magic, struct cgroup_namespace *ns) { - struct super_block *pinned_sb = NULL; struct cgroup_sb_opts opts; struct cgroup_root *root; struct cgroup_subsys *ss; struct dentry *dentry; int i, ret; - bool new_root = false; cgroup_lock_and_drain_offline(&cgrp_dfl_root.cgrp); @@ -1180,29 +1178,6 @@ struct dentry *cgroup1_mount(struct file_system_type *fs_type, int flags, if (root->flags ^ opts.flags) pr_warn("new mount options do not match the existing superblock, will be ignored\n"); - /* - * We want to reuse @root whose lifetime is governed by its - * ->cgrp. Let's check whether @root is alive and keep it - * that way. As cgroup_kill_sb() can happen anytime, we - * want to block it by pinning the sb so that @root doesn't - * get killed before mount is complete. - * - * With the sb pinned, tryget_live can reliably indicate - * whether @root can be reused. If it's being killed, - * drain it. We can use wait_queue for the wait but this - * path is super cold. Let's just sleep a bit and retry. - */ - pinned_sb = kernfs_pin_sb(root->kf_root, NULL); - if (IS_ERR(pinned_sb) || - !percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { - mutex_unlock(&cgroup_mutex); - if (!IS_ERR_OR_NULL(pinned_sb)) - deactivate_super(pinned_sb); - msleep(10); - ret = restart_syscall(); - goto out_free; - } - ret = 0; goto out_unlock; } @@ -1228,15 +1203,20 @@ struct dentry *cgroup1_mount(struct file_system_type *fs_type, int flags, ret = -ENOMEM; goto out_unlock; } - new_root = true; init_cgroup_root(root, &opts); - ret = cgroup_setup_root(root, opts.subsys_mask, PERCPU_REF_INIT_DEAD); + ret = cgroup_setup_root(root, opts.subsys_mask); if (ret) cgroup_free_root(root); out_unlock: + if (!ret && !percpu_ref_tryget_live(&root->cgrp.self.refcnt)) { + mutex_unlock(&cgroup_mutex); + msleep(10); + ret = restart_syscall(); + goto out_free; + } mutex_unlock(&cgroup_mutex); out_free: kfree(opts.release_agent); @@ -1248,25 +1228,13 @@ struct dentry *cgroup1_mount(struct file_system_type *fs_type, int flags, dentry = cgroup_do_mount(&cgroup_fs_type, flags, root, CGROUP_SUPER_MAGIC, ns); - /* - * There's a race window after we release cgroup_mutex and before - * allocating a superblock. Make sure a concurrent process won't - * be able to re-use the root during this window by delaying the - * initialization of root refcnt. - */ - if (new_root) { - mutex_lock(&cgroup_mutex); - percpu_ref_reinit(&root->cgrp.self.refcnt); - mutex_unlock(&cgroup_mutex); + if (!IS_ERR(dentry) && percpu_ref_is_dying(&root->cgrp.self.refcnt)) { + struct super_block *sb = dentry->d_sb; + dput(dentry); + deactivate_locked_super(sb); + msleep(10); + dentry = ERR_PTR(restart_syscall()); } - - /* - * If @pinned_sb, we're reusing an existing root and holding an - * extra ref on its sb. Mount is complete. Put the extra ref. - */ - if (pinned_sb) - deactivate_super(pinned_sb); - return dentry; } diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 08bd40d..eaee21d 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -1897,7 +1897,7 @@ void init_cgroup_root(struct cgroup_root *root, struct cgroup_sb_opts *opts) set_bit(CGRP_CPUSET_CLONE_CHILDREN, &root->cgrp.flags); } -int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask, int ref_flags) +int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask) { LIST_HEAD(tmp_links); struct cgroup *root_cgrp = &root->cgrp; @@ -1914,7 +1914,7 @@ int cgroup_setup_root(struct cgroup_root *root, u16 ss_mask, int ref_flags) root_cgrp->ancestor_ids[0] = ret; ret = percpu_ref_init(&root_cgrp->self.refcnt, css_release, - ref_flags, GFP_KERNEL); + 0, GFP_KERNEL); if (ret) goto out; @@ -2091,18 +2091,16 @@ static void cgroup_kill_sb(struct super_block *sb) struct cgroup_root *root = cgroup_root_from_kf(kf_root); /* - * If @root doesn't have any mounts or children, start killing it. + * If @root doesn't have any children, start killing it. * This prevents new mounts by disabling percpu_ref_tryget_live(). * cgroup_mount() may wait for @root's release. * * And don't kill the default root. */ - if (!list_empty(&root->cgrp.self.children) || - root == &cgrp_dfl_root) - cgroup_put(&root->cgrp); - else + if (list_empty(&root->cgrp.self.children) && root != &cgrp_dfl_root && + !percpu_ref_is_dying(&root->cgrp.self.refcnt)) percpu_ref_kill(&root->cgrp.self.refcnt); - + cgroup_put(&root->cgrp); kernfs_kill_sb(sb); } @@ -5371,7 +5369,7 @@ int __init cgroup_init(void) hash_add(css_set_table, &init_css_set.hlist, css_set_hash(init_css_set.subsys)); - BUG_ON(cgroup_setup_root(&cgrp_dfl_root, 0, 0)); + BUG_ON(cgroup_setup_root(&cgrp_dfl_root, 0)); mutex_unlock(&cgroup_mutex); -- 1.8.3

1 1

[PATCH 1/2] qm: fixup the problem of wrong judgement of used parameter
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA In this patch, we try to fixup the problem of wrong judgement of used parameter. When the accelerator driver registers to crypto, the self-test program will send task to hardware, the used para will decrease in interrupt thread, but exit flow of crypto will call hisi_qm_stop_qp_nolock function to stop queue, which try to get value of used. In the above scene, it will appear to get the value first and then decrease, which causes null pointer. So we should distinguish fault handling process from normal stop process. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Cheng Hu <hucheng.hu(a)huawei.com> Reviewed-by: Guangwei Zhou <zhouguangwei5(a)huawei.com> Reviewed-by: Junxian Liu <liujunxian3(a)huawei.com> Reviewed-by: Shukun Tan <tanshukun1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/qm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index e89a770..86f4a12 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -1591,10 +1591,12 @@ static int hisi_qm_stop_qp_nolock(struct hisi_qp *qp) if (qp->qm->wq) flush_workqueue(qp->qm->wq); + else + flush_work(&qp->qm->work); /* wait for increase used count in qp send and last poll qp finish */ udelay(WAIT_PERIOD); - if (atomic_read(&qp->qp_status.used)) + if (unlikely(qp->is_resetting && atomic_read(&qp->qp_status.used))) qp_stop_fail_cb(qp); dev_dbg(dev, "stop queue %u!", qp->qp_id); -- 1.8.3

1 1

[PATCH 1/9] nfsd: Ensure CLONE persists data and metadata changes to the target file
by Yang Yingliang 17 Apr '20

17 Apr '20

From: Trond Myklebust <trondmy(a)gmail.com> mainline inclusion from mainline-v5.5-rc1 commit a25e3726b32c746c0098125d4c7463bb84df72bb category: bugfix bugzilla: 27346 CVE: NA ------------------------------------------------- The NFSv4.2 CLONE operation has implicit persistence requirements on the target file, since there is no protocol requirement that the client issue a separate operation to persist data. For that reason, we should call vfs_fsync_range() on the destination file after a successful call to vfs_clone_file_range(). Fixes: ffa0160a1039 ("nfsd: implement the NFSv4.2 CLONE operation") Signed-off-by: Trond Myklebust <trond.myklebust(a)hammerspace.com> Cc: stable(a)vger.kernel.org # v4.5+ Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Conflicts: fs/nfsd/nfs4proc.c fs/nfsd/vfs.c 42ec3d4c0218 ("vfs: make remap_file_range functions take and return bytes completed") 2e5dfc99f2e6 ("vfs: combine the clone and dedupe into a single remap_file_range") Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/nfsd/nfs4proc.c | 3 ++- fs/nfsd/vfs.c | 16 +++++++++++++--- fs/nfsd/vfs.h | 2 +- 3 files changed, 16 insertions(+), 5 deletions(-) diff --git a/fs/nfsd/nfs4proc.c b/fs/nfsd/nfs4proc.c index f35aa9f..1c3e6de 100644 --- a/fs/nfsd/nfs4proc.c +++ b/fs/nfsd/nfs4proc.c @@ -1082,7 +1082,8 @@ static __be32 nfsd4_do_lookupp(struct svc_rqst *rqstp, struct svc_fh *fh) goto out; status = nfsd4_clone_file_range(src, clone->cl_src_pos, - dst, clone->cl_dst_pos, clone->cl_count); + dst, clone->cl_dst_pos, clone->cl_count, + EX_ISSYNC(cstate->current_fh.fh_export)); fput(dst); fput(src); diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index 80ceded..90e97c8 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -552,10 +552,20 @@ __be32 nfsd4_set_nfs4_label(struct svc_rqst *rqstp, struct svc_fh *fhp, #endif __be32 nfsd4_clone_file_range(struct file *src, u64 src_pos, struct file *dst, - u64 dst_pos, u64 count) + u64 dst_pos, u64 count, bool sync) { - return nfserrno(vfs_clone_file_range(src, src_pos, dst, dst_pos, - count)); + int cloned; + + cloned = vfs_clone_file_range(src, src_pos, dst, dst_pos, count); + if (cloned < 0) + return nfserrno(cloned); + if (sync) { + loff_t dst_end = count ? dst_pos + count - 1 : LLONG_MAX; + int status = vfs_fsync_range(dst, dst_pos, dst_end, 0); + if (status < 0) + return nfserrno(status); + } + return 0; } ssize_t nfsd_copy_file_range(struct file *src, u64 src_pos, struct file *dst, diff --git a/fs/nfsd/vfs.h b/fs/nfsd/vfs.h index db35124..02b0a14 100644 --- a/fs/nfsd/vfs.h +++ b/fs/nfsd/vfs.h @@ -58,7 +58,7 @@ __be32 nfsd4_set_nfs4_label(struct svc_rqst *, struct svc_fh *, __be32 nfsd4_vfs_fallocate(struct svc_rqst *, struct svc_fh *, struct file *, loff_t, loff_t, int); __be32 nfsd4_clone_file_range(struct file *, u64, struct file *, - u64, u64); + u64, u64, bool); #endif /* CONFIG_NFSD_V4 */ __be32 nfsd_create_locked(struct svc_rqst *, struct svc_fh *, char *name, int len, struct iattr *attrs, -- 1.8.3

1 8

[PATCH] qm: Move all the same logic functions of hisilicon crypto to qm
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA In this patch, we try to move accelerator drivers into qm module to simplify code, including RAS/FLR/SRIOV and uacce_mode/pf_q_num/ vfs_num setting. In qm.h we add mode_set/q_num_set/vf_num_set for accelerator to realize module parm uacce_mode/pf_q_num/vfs_num setting. In qm.c hisi_qm_add_to_list and hisi_qm_del_from_list can be called to manage accelerators through hisi_qm_list. We additionally realize hisi_qm_alloc_qps_node to fix the problem that device is found but queue request fails. Because of RAS process flow/FLR process flow/ SRIOV config flow are consistent for different accelerator drivers, so we add Corresponding interfaces. Meanwhile, zip/hpre/sec/rde accelerator drivers should match changes of qm, including RAS/FLR/SRIOV processing, module parms setting, queue allocing. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Cheng Hu <hucheng.hu(a)huawei.com> Reviewed-by: Wei Zhang <zhangwei375(a)huawei.com> Reviewed-by: Guangwei Zhang <zhouguangwei5(a)huawei.com> Reviewed-by: Junxian Liu <liujunxian3(a)huawei.com> Reviewed-by: Shukun Tan <tanshukun1(a)huawei.com> Reviewed-by: Hao Fang <fanghao11(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/hpre/hpre.h | 9 +- drivers/crypto/hisilicon/hpre/hpre_crypto.c | 20 +- drivers/crypto/hisilicon/hpre/hpre_main.c | 944 +++--------------- drivers/crypto/hisilicon/qm.c | 1093 +++++++++++++++++---- drivers/crypto/hisilicon/qm.h | 209 +++- drivers/crypto/hisilicon/rde/rde.h | 11 +- drivers/crypto/hisilicon/rde/rde_api.c | 29 +- drivers/crypto/hisilicon/rde/rde_api.h | 2 +- drivers/crypto/hisilicon/rde/rde_main.c | 717 ++++---------- drivers/crypto/hisilicon/sec2/sec.h | 13 +- drivers/crypto/hisilicon/sec2/sec_crypto.c | 83 +- drivers/crypto/hisilicon/sec2/sec_main.c | 1364 +++++++-------------------- drivers/crypto/hisilicon/zip/zip.h | 9 +- drivers/crypto/hisilicon/zip/zip_crypto.c | 30 +- drivers/crypto/hisilicon/zip/zip_main.c | 1152 +++++----------------- 15 files changed, 2053 insertions(+), 3632 deletions(-) diff --git a/drivers/crypto/hisilicon/hpre/hpre.h b/drivers/crypto/hisilicon/hpre/hpre.h index ba7c88e..3ac02ef 100644 --- a/drivers/crypto/hisilicon/hpre/hpre.h +++ b/drivers/crypto/hisilicon/hpre/hpre.h @@ -35,25 +35,18 @@ struct hpre_debugfs_file { struct hpre_debug *debug; }; -#define HPRE_RESET 0 -#define HPRE_WAIT_DELAY 1000 - /* * One HPRE controller has one PF and multiple VFs, some global configurations * which PF has need this structure. * Just relevant for PF. */ struct hpre_debug { - struct dentry *debug_root; struct hpre_debugfs_file files[HPRE_DEBUGFS_FILE_NUM]; }; struct hpre { struct hisi_qm qm; - struct list_head list; struct hpre_debug debug; - u32 num_vfs; - unsigned long status; }; enum hpre_alg_type { @@ -80,7 +73,7 @@ struct hpre_sqe { __le32 rsvd1[_HPRE_SQE_ALIGN_EXT]; }; -struct hpre *hpre_find_device(int node); +struct hisi_qp *hpre_create_qp(void); int hpre_algs_register(void); void hpre_algs_unregister(void); diff --git a/drivers/crypto/hisilicon/hpre/hpre_crypto.c b/drivers/crypto/hisilicon/hpre/hpre_crypto.c index aadc975..7610e13 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_crypto.c +++ b/drivers/crypto/hisilicon/hpre/hpre_crypto.c @@ -147,26 +147,18 @@ static void hpre_rm_req_from_ctx(struct hpre_asym_request *hpre_req) static struct hisi_qp *hpre_get_qp_and_start(void) { struct hisi_qp *qp; - struct hpre *hpre; int ret; - /* find the proper hpre device, which is near the current CPU core */ - hpre = hpre_find_device(cpu_to_node(smp_processor_id())); - if (!hpre) { - pr_err("Can not find proper hpre device!\n"); - return ERR_PTR(-ENODEV); - } - - qp = hisi_qm_create_qp(&hpre->qm, 0); - if (IS_ERR(qp)) { - pci_err(hpre->qm.pdev, "Can not create qp!\n"); + qp = hpre_create_qp(); + if (!qp) { + pr_err("Can not create hpre qp!\n"); return ERR_PTR(-ENODEV); } ret = hisi_qm_start_qp(qp, 0); if (ret < 0) { - hisi_qm_release_qp(qp); - pci_err(hpre->qm.pdev, "Can not start qp!\n"); + hisi_qm_free_qps(&qp, 1); + pci_err(qp->qm->pdev, "Can not start qp!\n"); return ERR_PTR(-EINVAL); } @@ -337,7 +329,7 @@ static void hpre_ctx_clear(struct hpre_ctx *ctx, bool is_clear_all) if (is_clear_all) { idr_destroy(&ctx->req_idr); kfree(ctx->req_list); - hisi_qm_release_qp(ctx->qp); + hisi_qm_free_qps(&ctx->qp, 1); } ctx->crt_g2_mode = false; diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index 6a3bce2..4dc0d3e 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -13,9 +13,6 @@ #include <linux/uacce.h> #include "hpre.h" -#define HPRE_ENABLE 1 -#define HPRE_DISABLE 0 -#define HPRE_VF_NUM 63 #define HPRE_QUEUE_NUM_V2 1024 #define HPRE_QUEUE_NUM_V1 4096 #define HPRE_QM_ABNML_INT_MASK 0x100004 @@ -63,10 +60,6 @@ #define HPRE_HAC_ECC2_CNT 0x301a08 #define HPRE_HAC_INT_STATUS 0x301800 #define HPRE_HAC_SOURCE_INT 0x301600 -#define MASTER_GLOBAL_CTRL_SHUTDOWN 1 -#define MASTER_TRANS_RETURN_RW 3 -#define HPRE_MASTER_TRANS_RETURN 0x300150 -#define HPRE_MASTER_GLOBAL_CTRL 0x300000 #define HPRE_CLSTR_ADDR_INTRVL 0x1000 #define HPRE_CLUSTER_INQURY 0x100 #define HPRE_CLSTR_ADDR_INQRY_RSLT 0x104 @@ -83,24 +76,18 @@ #define HPRE_QM_VFG_AX_MASK 0xff #define HPRE_BD_USR_MASK 0x3 #define HPRE_CLUSTER_CORE_MASK 0xf -#define HPRE_RESET_WAIT_TIMEOUT 400 #define HPRE_AM_OOO_SHUTDOWN_ENB 0x301044 #define AM_OOO_SHUTDOWN_ENABLE BIT(0) #define AM_OOO_SHUTDOWN_DISABLE 0xFFFFFFFE -#define HPRE_WR_MSI_PORT 0xFFFB +#define HPRE_WR_MSI_PORT BIT(2) -#define HPRE_HW_ERROR_IRQ_ENABLE 1 -#define HPRE_HW_ERROR_IRQ_DISABLE 0 -#define HPRE_PCI_COMMAND_INVALID 0xFFFFFFFF #define HPRE_CORE_ECC_2BIT_ERR BIT(1) #define HPRE_OOO_ECC_2BIT_ERR BIT(5) -#define HPRE_QM_BME_FLR BIT(7) -#define HPRE_QM_PM_FLR BIT(11) -#define HPRE_QM_SRIOV_FLR BIT(12) - -#define HPRE_USLEEP 10 +#define HPRE_QM_BME_FLR BIT(7) +#define HPRE_QM_PM_FLR BIT(11) +#define HPRE_QM_SRIOV_FLR BIT(12) /* function index: * 1 for hpre bypass mode, @@ -108,8 +95,7 @@ */ #define HPRE_VIA_MSI_DSM 1 -static LIST_HEAD(hpre_list); -static DEFINE_MUTEX(hpre_list_lock); +static struct hisi_qm_list hpre_devices; static const char hpre_name[] = "hisi_hpre"; static struct dentry *hpre_debugfs_root; static const struct pci_device_id hpre_dev_ids[] = { @@ -183,59 +169,29 @@ struct hpre_hw_error { {"INT_STATUS ", HPRE_INT_STATUS}, }; -static int hpre_pf_q_num_set(const char *val, const struct kernel_param *kp) +#ifdef CONFIG_CRYPTO_QM_UACCE +static int uacce_mode_set(const char *val, const struct kernel_param *kp) { - struct pci_dev *pdev; - u32 q_num; - u32 n = 0; - u8 rev_id; - int ret; - - if (!val) - return -EINVAL; - - pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, HPRE_PCI_DEVICE_ID, NULL); - if (!pdev) { - q_num = HPRE_QUEUE_NUM_V2; - pr_info("No device found currently, suppose queue number is %d\n", - q_num); - } else { - rev_id = pdev->revision; - if (rev_id != QM_HW_V2) - return -EINVAL; - - q_num = HPRE_QUEUE_NUM_V2; - } - - ret = kstrtou32(val, 10, &n); - if (ret != 0 || n == 0 || n > q_num) - return -EINVAL; - - return param_set_int(val, kp); + return mode_set(val, kp); } -static const struct kernel_param_ops hpre_pf_q_num_ops = { - .set = hpre_pf_q_num_set, +static const struct kernel_param_ops uacce_mode_ops = { + .set = uacce_mode_set, .get = param_get_int, }; -static int uacce_mode_set(const char *val, const struct kernel_param *kp) -{ - u32 n; - int ret; - - if (!val) - return -EINVAL; - - ret = kstrtou32(val, 10, &n); - if (ret != 0 || (n != UACCE_MODE_NOIOMMU && n != UACCE_MODE_NOUACCE)) - return -EINVAL; +static int uacce_mode = UACCE_MODE_NOUACCE; +module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); +MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); +#endif - return param_set_int(val, kp); +static int pf_q_num_set(const char *val, const struct kernel_param *kp) +{ + return q_num_set(val, kp, HPRE_PCI_DEVICE_ID); } -static const struct kernel_param_ops uacce_mode_ops = { - .set = uacce_mode_set, +static const struct kernel_param_ops hpre_pf_q_num_ops = { + .set = pf_q_num_set, .get = param_get_int, }; @@ -243,46 +199,31 @@ static int uacce_mode_set(const char *val, const struct kernel_param *kp) module_param_cb(pf_q_num, &hpre_pf_q_num_ops, &pf_q_num, 0444); MODULE_PARM_DESC(pf_q_num, "Number of queues in PF of CS(1-1024)"); -static int uacce_mode = UACCE_MODE_NOUACCE; -module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); -MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); -static inline void hpre_add_to_list(struct hpre *hpre) +static int vfs_num_set(const char *val, const struct kernel_param *kp) { - mutex_lock(&hpre_list_lock); - list_add_tail(&hpre->list, &hpre_list); - mutex_unlock(&hpre_list_lock); + return vf_num_set(val, kp); } -static inline void hpre_remove_from_list(struct hpre *hpre) -{ - mutex_lock(&hpre_list_lock); - list_del(&hpre->list); - mutex_unlock(&hpre_list_lock); -} +static const struct kernel_param_ops vfs_num_ops = { + .set = vfs_num_set, + .get = param_get_int, +}; -struct hpre *hpre_find_device(int node) +static u32 vfs_num; +module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444); +MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)"); + +struct hisi_qp *hpre_create_qp(void) { - struct hpre *hpre, *ret = NULL; - int min_distance = INT_MAX; - struct device *dev; - int dev_node = 0; - - mutex_lock(&hpre_list_lock); - list_for_each_entry(hpre, &hpre_list, list) { - dev = &hpre->qm.pdev->dev; -#ifdef CONFIG_NUMA - dev_node = dev->numa_node; - if (dev_node < 0) - dev_node = 0; -#endif - if (node_distance(dev_node, node) < min_distance) { - ret = hpre; - min_distance = node_distance(dev_node, node); - } - } - mutex_unlock(&hpre_list_lock); + int node = cpu_to_node(smp_processor_id()); + struct hisi_qp *qp = NULL; + int ret; - return ret; + ret = hisi_qm_alloc_qps_node(node, &hpre_devices, &qp, 1, 0); + if (!ret) + return qp; + + return NULL; } static void hpre_pasid_enable(struct hisi_qm *qm) @@ -351,9 +292,8 @@ static int hpre_set_cluster(struct hisi_qm *qm) return 0; } -static int hpre_set_user_domain_and_cache(struct hpre *hpre) +static int hpre_set_user_domain_and_cache(struct hisi_qm *qm) { - struct hisi_qm *qm = &hpre->qm; struct pci_dev *pdev = qm->pdev; u32 val; int ret; @@ -403,7 +343,7 @@ static int hpre_set_user_domain_and_cache(struct hpre *hpre) pci_err(pdev, "acpi_evaluate_dsm err.\n"); /* disable FLR triggered by BME(bus master enable) */ - val = readl(hpre->qm.io_base + QM_PEH_AXUSER_CFG); + val = readl(HPRE_ADDR(qm, QM_PEH_AXUSER_CFG)); val &= ~(HPRE_QM_BME_FLR | HPRE_QM_SRIOV_FLR); val |= HPRE_QM_PM_FLR; writel(val, HPRE_ADDR(qm, QM_PEH_AXUSER_CFG)); @@ -433,23 +373,21 @@ static void hpre_cnt_regs_clear(struct hisi_qm *qm) hisi_qm_debug_regs_clear(qm); } -static void hpre_hw_error_disable(struct hpre *hpre) +static void hpre_hw_error_disable(struct hisi_qm *qm) { - struct hisi_qm *qm = &hpre->qm; u32 val; /* disable hpre hw error interrupts */ writel(HPRE_CORE_INT_DISABLE, qm->io_base + HPRE_INT_MASK); /* disable HPRE block master OOO when m-bit error occur */ - val = readl(hpre->qm.io_base + HPRE_AM_OOO_SHUTDOWN_ENB); + val = readl(qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); val &= AM_OOO_SHUTDOWN_DISABLE; - writel(val, hpre->qm.io_base + HPRE_AM_OOO_SHUTDOWN_ENB); + writel(val, qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); } -static void hpre_hw_error_enable(struct hpre *hpre) +static void hpre_hw_error_enable(struct hisi_qm *qm) { - struct hisi_qm *qm = &hpre->qm; u32 val; /* clear HPRE hw error source if having */ @@ -462,9 +400,9 @@ static void hpre_hw_error_enable(struct hpre *hpre) writel(HPRE_HAC_RAS_FE_ENABLE, qm->io_base + HPRE_RAS_FE_ENB); /* enable HPRE block master OOO when m-bit error occur */ - val = readl(hpre->qm.io_base + HPRE_AM_OOO_SHUTDOWN_ENB); + val = readl(qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); val |= AM_OOO_SHUTDOWN_ENABLE; - writel(val, hpre->qm.io_base + HPRE_AM_OOO_SHUTDOWN_ENB); + writel(val, qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); } static inline struct hisi_qm *hpre_file_to_qm(struct hpre_debugfs_file *file) @@ -484,9 +422,7 @@ static u32 hpre_current_qm_read(struct hpre_debugfs_file *file) static int hpre_current_qm_write(struct hpre_debugfs_file *file, u32 val) { struct hisi_qm *qm = hpre_file_to_qm(file); - struct hpre_debug *debug = file->debug; - struct hpre *hpre = container_of(debug, struct hpre, debug); - u32 num_vfs = hpre->num_vfs; + u32 num_vfs = qm->vfs_num; u32 vfq_num, tmp; if (val > num_vfs) @@ -657,11 +593,14 @@ static int hpre_create_debugfs_file(struct hpre_debug *dbg, struct dentry *dir, enum hpre_ctrl_dbgfs_file type, int indx) { struct dentry *tmp, *file_dir; + struct hpre *hpre; - if (dir) + if (dir) { file_dir = dir; - else - file_dir = dbg->debug_root; + } else { + hpre = container_of(dbg, struct hpre, debug); + file_dir = hpre->qm.debug.debug_root; + } if (type >= HPRE_DEBUG_FILE_NUM) return -EINVAL; @@ -694,7 +633,8 @@ static int hpre_pf_comm_regs_debugfs_init(struct hpre_debug *debug) regset->nregs = ARRAY_SIZE(hpre_com_dfx_regs); regset->base = qm->io_base; - tmp = debugfs_create_regset32("regs", 0444, debug->debug_root, regset); + tmp = debugfs_create_regset32("regs", 0444, qm->debug.debug_root, + regset); if (!tmp) return -ENOENT; @@ -716,7 +656,7 @@ static int hpre_cluster_debugfs_init(struct hpre_debug *debug) if (ret < 0) return -EINVAL; - tmp_d = debugfs_create_dir(buf, debug->debug_root); + tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); if (!tmp_d) return -ENOENT; @@ -761,9 +701,9 @@ static int hpre_ctrl_debug_init(struct hpre_debug *debug) return hpre_cluster_debugfs_init(debug); } -static int hpre_debugfs_init(struct hpre *hpre) +static int hpre_debugfs_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hpre->qm; + struct hpre *hpre = container_of(qm, struct hpre, qm); struct device *dev = &qm->pdev->dev; struct dentry *dir; int ret; @@ -779,7 +719,6 @@ static int hpre_debugfs_init(struct hpre *hpre) goto failed_to_create; if (qm->pdev->device == HPRE_PCI_DEVICE_ID) { - hpre->debug.debug_root = dir; ret = hpre_ctrl_debug_init(&hpre->debug); if (ret) goto failed_to_create; @@ -791,69 +730,41 @@ static int hpre_debugfs_init(struct hpre *hpre) return ret; } -static void hpre_debugfs_exit(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - - debugfs_remove_recursive(qm->debug.debug_root); -} - static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) { - enum qm_hw_ver rev_id; - - rev_id = hisi_qm_get_hw_version(pdev); - if (rev_id < 0) - return -ENODEV; + int ret; - if (rev_id == QM_HW_V1) { +#ifdef CONFIG_CRYPTO_QM_UACCE + qm->algs = "rsa\ndh\n"; + qm->uacce_mode = uacce_mode; +#endif + qm->pdev = pdev; + ret = hisi_qm_pre_init(qm, pf_q_num, HPRE_PF_DEF_Q_BASE); + if (ret) + return ret; + if (qm->ver == QM_HW_V1) { pci_warn(pdev, "HPRE version 1 is not supported!\n"); return -EINVAL; } - qm->pdev = pdev; - qm->ver = rev_id; + qm->qm_list = &hpre_devices; qm->sqe_size = HPRE_SQE_SIZE; qm->dev_name = hpre_name; - qm->fun_type = (pdev->device == HPRE_PCI_DEVICE_ID) ? - QM_HW_PF : QM_HW_VF; - qm->algs = "rsa\ndh\n"; - switch (uacce_mode) { - case UACCE_MODE_NOUACCE: - qm->use_uacce = false; - break; - case UACCE_MODE_NOIOMMU: - qm->use_uacce = true; - break; - default: - return -EINVAL; - } - if (pdev->is_physfn) { - qm->qp_base = HPRE_PF_DEF_Q_BASE; - qm->qp_num = pf_q_num; - qm->debug.curr_qm_qp_num = pf_q_num; - } return 0; } -static void hpre_hw_err_init(struct hpre *hpre) -{ - hisi_qm_hw_error_init(&hpre->qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT, - 0, QM_DB_RANDOM_INVALID); - hpre_hw_error_enable(hpre); -} - -static void hpre_open_master_ooo(struct hisi_qm *qm) +static void hpre_log_hw_error(struct hisi_qm *qm, u32 err_sts) { - u32 val; + const struct hpre_hw_error *err = hpre_hw_errors; + struct device *dev = &qm->pdev->dev; - val = readl(qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); - writel(val & AM_OOO_SHUTDOWN_DISABLE, - HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); - writel(val | AM_OOO_SHUTDOWN_ENABLE, - HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); + while (err->msg) { + if (err->int_msk & err_sts) + dev_warn(dev, "%s [error status=0x%x] found\n", + err->msg, err->int_msk); + err++; + } } static u32 hpre_get_hw_err_status(struct hisi_qm *qm) @@ -866,41 +777,47 @@ static void hpre_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) writel(err_sts, qm->io_base + HPRE_HAC_SOURCE_INT); } -static void hpre_log_hw_error(struct hisi_qm *qm, u32 err_sts) +static void hpre_open_axi_master_ooo(struct hisi_qm *qm) { - const struct hpre_hw_error *err = hpre_hw_errors; - struct device *dev = &qm->pdev->dev; + u32 value; - while (err->msg) { - if (err->int_msk & err_sts) - dev_warn(dev, "%s [error status=0x%x] found\n", - err->msg, err->int_msk); - err++; - } + value = readl(qm->io_base + HPRE_AM_OOO_SHUTDOWN_ENB); + writel(value & AM_OOO_SHUTDOWN_DISABLE, + HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); + writel(value | AM_OOO_SHUTDOWN_ENABLE, + HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); } -static int hpre_pf_probe_init(struct hpre *hpre) +static int hpre_pf_probe_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hpre->qm; int ret; if (qm->ver != QM_HW_V2) return -EINVAL; qm->ctrl_q_num = HPRE_QUEUE_NUM_V2; - qm->err_ini.qm_wr_port = HPRE_WR_MSI_PORT; - qm->err_ini.ecc_2bits_mask = (HPRE_CORE_ECC_2BIT_ERR | - HPRE_OOO_ECC_2BIT_ERR); - qm->err_ini.open_axi_master_ooo = hpre_open_master_ooo; qm->err_ini.get_dev_hw_err_status = hpre_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = hpre_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HPRE_CORE_ECC_2BIT_ERR | + HPRE_OOO_ECC_2BIT_ERR; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; + qm->err_ini.err_info.acpi_rst = "HRST"; + + qm->err_ini.hw_err_disable = hpre_hw_error_disable; + qm->err_ini.hw_err_enable = hpre_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hpre_set_user_domain_and_cache; qm->err_ini.log_dev_hw_err = hpre_log_hw_error; + qm->err_ini.open_axi_master_ooo = hpre_open_axi_master_ooo; + qm->err_ini.err_info.msi_wr_port = HPRE_WR_MSI_PORT; - ret = hpre_set_user_domain_and_cache(hpre); + ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) return ret; - hpre_hw_err_init(hpre); + hisi_qm_dev_err_init(qm); return 0; } @@ -914,10 +831,9 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) hpre = devm_kzalloc(&pdev->dev, sizeof(*hpre), GFP_KERNEL); if (!hpre) return -ENOMEM; - - pci_set_drvdata(pdev, hpre); - qm = &hpre->qm; + qm->fun_type = pdev->is_physfn ? QM_HW_PF : QM_HW_VF; + ret = hpre_qm_pre_init(qm, pdev); if (ret) return ret; @@ -929,7 +845,7 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) } if (pdev->is_physfn) { - ret = hpre_pf_probe_init(hpre); + ret = hpre_pf_probe_init(qm); if (ret) { pci_err(pdev, "Failed to init pf probe (%d)!\n", ret); goto err_with_qm_init; @@ -947,26 +863,35 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_with_err_init; } - ret = hpre_debugfs_init(hpre); + ret = hpre_debugfs_init(qm); if (ret) pci_warn(pdev, "init debugfs fail!\n"); - hpre_add_to_list(hpre); + hisi_qm_add_to_list(qm, &hpre_devices); ret = hpre_algs_register(); if (ret < 0) { - hpre_remove_from_list(hpre); pci_err(pdev, "fail to register algs to crypto!\n"); goto err_with_qm_start; } + + if (qm->fun_type == QM_HW_PF && vfs_num > 0) { + ret = hisi_qm_sriov_enable(pdev, vfs_num); + if (ret < 0) + goto err_with_crypto_register; + } + return 0; +err_with_crypto_register: + hpre_algs_unregister(); + err_with_qm_start: + hisi_qm_del_from_list(qm, &hpre_devices); hisi_qm_stop(qm, QM_NORMAL); err_with_err_init: - if (pdev->is_physfn) - hpre_hw_error_disable(hpre); + hisi_qm_dev_err_uninit(qm); err_with_qm_init: hisi_qm_uninit(qm); @@ -974,627 +899,51 @@ static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) return ret; } -static int hpre_vf_q_assign(struct hpre *hpre, int num_vfs) -{ - struct hisi_qm *qm = &hpre->qm; - u32 qp_num = qm->qp_num; - int q_num, remain_q_num, i; - u32 q_base = qp_num; - int ret; - - if (!num_vfs) - return -EINVAL; - - remain_q_num = qm->ctrl_q_num - qp_num; - /* If remain queues not enough, return error. */ - if (remain_q_num < num_vfs) - return -EINVAL; - - q_num = remain_q_num / num_vfs; - for (i = 1; i <= num_vfs; i++) { - if (i == num_vfs) - q_num += remain_q_num % num_vfs; - ret = hisi_qm_set_vft(qm, i, q_base, (u32)q_num); - if (ret) - return ret; - q_base += q_num; - } - - return 0; -} - -static int hpre_clear_vft_config(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - u32 num_vfs = hpre->num_vfs; - int ret; - u32 i; - - for (i = 1; i <= num_vfs; i++) { - ret = hisi_qm_set_vft(qm, i, 0, 0); - if (ret) - return ret; - } - hpre->num_vfs = 0; - - return 0; -} - -static int hpre_sriov_enable(struct pci_dev *pdev, int max_vfs) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - int pre_existing_vfs, num_vfs, ret; - - pre_existing_vfs = pci_num_vf(pdev); - if (pre_existing_vfs) { - pci_err(pdev, - "Can't enable VF. Please disable pre-enabled VFs!\n"); - return 0; - } - - num_vfs = min_t(int, max_vfs, HPRE_VF_NUM); - ret = hpre_vf_q_assign(hpre, num_vfs); - if (ret) { - pci_err(pdev, "Can't assign queues for VF!\n"); - return ret; - } - - hpre->num_vfs = num_vfs; - - ret = pci_enable_sriov(pdev, num_vfs); - if (ret) { - pci_err(pdev, "Can't enable VF!\n"); - hpre_clear_vft_config(hpre); - return ret; - } - return num_vfs; -} - -static int hpre_try_frozen_vfs(struct pci_dev *pdev) -{ - int ret = 0; - struct hpre *hpre, *vf_hpre; - struct pci_dev *dev; - - /* Try to frozen all the VFs as disable SRIOV */ - mutex_lock(&hpre_list_lock); - list_for_each_entry(hpre, &hpre_list, list) { - dev = hpre->qm.pdev; - if (dev == pdev) - continue; - if (pci_physfn(dev) == pdev) { - vf_hpre = pci_get_drvdata(dev); - ret = hisi_qm_frozen(&vf_hpre->qm); - if (ret) - goto frozen_fail; - } - } - -frozen_fail: - mutex_unlock(&hpre_list_lock); - return ret; -} - -static int hpre_sriov_disable(struct pci_dev *pdev) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - - if (pci_vfs_assigned(pdev)) { - pci_err(pdev, "Failed to disable VFs while VFs are assigned!\n"); - return -EPERM; - } - - /* While VF is in used, SRIOV cannot be disabled. - * However, there is a risk that the behavior is uncertain if the - * device is in hardware resetting. - */ - if (hpre_try_frozen_vfs(pdev)) { - dev_err(&pdev->dev, - "Uacce user space task is using its VF!\n"); - return -EBUSY; - } - - /* remove in hpre_pci_driver will be called to free VF resources */ - pci_disable_sriov(pdev); - return hpre_clear_vft_config(hpre); -} - static int hpre_sriov_configure(struct pci_dev *pdev, int num_vfs) { if (num_vfs) - return hpre_sriov_enable(pdev, num_vfs); + return hisi_qm_sriov_enable(pdev, num_vfs); else - return hpre_sriov_disable(pdev); -} - -static void hpre_remove_wait_delay(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - - while (hisi_qm_frozen(&hpre->qm) || - ((qm->fun_type == QM_HW_PF) && - hpre_try_frozen_vfs(hpre->qm.pdev))) - usleep_range(HPRE_USLEEP, HPRE_USLEEP); - udelay(HPRE_WAIT_DELAY); + return hisi_qm_sriov_disable(pdev, &hpre_devices); } static void hpre_remove(struct pci_dev *pdev) { - struct hpre *hpre = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hpre->qm; + struct hisi_qm *qm = pci_get_drvdata(pdev); + int ret; +#ifdef CONFIG_CRYPTO_QM_UACCE if (uacce_mode != UACCE_MODE_NOUACCE) - hpre_remove_wait_delay(hpre); - + hisi_qm_remove_wait_delay(qm, &hpre_devices); +#endif hpre_algs_unregister(); - hpre_remove_from_list(hpre); - if (qm->fun_type == QM_HW_PF && hpre->num_vfs != 0) - hpre_sriov_disable(pdev); - + hisi_qm_del_from_list(qm, &hpre_devices); + if (qm->fun_type == QM_HW_PF && qm->vfs_num) { + ret = hisi_qm_sriov_disable(pdev, NULL); + if (ret) { + pci_err(pdev, "Disable SRIOV fail!\n"); + return; + } + } if (qm->fun_type == QM_HW_PF) { hpre_cnt_regs_clear(qm); qm->debug.curr_qm_qp_num = 0; } - - hpre_debugfs_exit(hpre); + debugfs_remove_recursive(qm->debug.debug_root); hisi_qm_stop(qm, QM_NORMAL); if (qm->fun_type == QM_HW_PF) - hpre_hw_error_disable(hpre); + hisi_qm_dev_err_uninit(qm); hisi_qm_uninit(qm); } -static void hpre_shutdown(struct pci_dev *pdev) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - - hisi_qm_stop(&hpre->qm, QM_NORMAL); -} - -static pci_ers_result_t hpre_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - if (pdev->is_virtfn) - return PCI_ERS_RESULT_NONE; - - pci_info(pdev, "PCI error detected, state(=%d)!!\n", state); - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - return hisi_qm_process_dev_error(pdev); -} - -static int hpre_vf_reset_prepare(struct pci_dev *pdev, - enum qm_stop_reason stop_reason) -{ - struct pci_dev *dev; - struct hisi_qm *qm; - struct hpre *hpre; - int ret = 0; - - mutex_lock(&hpre_list_lock); - if (pdev->is_physfn) { - list_for_each_entry(hpre, &hpre_list, list) { - dev = hpre->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hpre->qm; - - ret = hisi_qm_stop(qm, stop_reason); - if (ret) - goto prepare_fail; - } - } - } - -prepare_fail: - mutex_unlock(&hpre_list_lock); - return ret; -} - -static int hpre_reset_prepare_rdy(struct hpre *hpre) -{ - struct pci_dev *pdev = hpre->qm.pdev; - struct hpre *hisi_hpre = pci_get_drvdata(pci_physfn(pdev)); - int delay = 0; - - while (test_and_set_bit(HPRE_RESET, &hisi_hpre->status)) { - msleep(++delay); - if (delay > HPRE_RESET_WAIT_TIMEOUT) - return -EBUSY; - } - - return 0; -} - -static int hpre_controller_reset_prepare(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - struct pci_dev *pdev = qm->pdev; - int ret; - - ret = hpre_reset_prepare_rdy(hpre); - if (ret) { - dev_err(&pdev->dev, "Controller reset not ready!\n"); - return ret; - } - - ret = hpre_vf_reset_prepare(pdev, QM_SOFT_RESET); - if (ret) { - dev_err(&pdev->dev, "Fails to stop VFs!\n"); - return ret; - } - - ret = hisi_qm_stop(qm, QM_SOFT_RESET); - if (ret) { - dev_err(&pdev->dev, "Fails to stop QM!\n"); - return ret; - } - -#ifdef CONFIG_CRYPTO_QM_UACCE - if (qm->use_uacce) { - ret = uacce_hw_err_isolate(&qm->uacce); - if (ret) { - dev_err(&pdev->dev, "Fails to isolate hw err!\n"); - return ret; - } - } -#endif - - return 0; -} - -static int hpre_soft_reset(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - struct device *dev = &qm->pdev->dev; - unsigned long long value = 0; - int ret; - u32 val; - - ret = hisi_qm_reg_test(qm); - if (ret) - return ret; - - ret = hisi_qm_set_vf_mse(qm, HPRE_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable vf mse bit.\n"); - return ret; - } - - ret = hisi_qm_set_msi(qm, HPRE_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable peh msi bit.\n"); - return ret; - } - - /* Set qm ecc if dev ecc happened to hold on ooo */ - hisi_qm_set_ecc(qm); - - /* OOO register set and check */ - writel(MASTER_GLOBAL_CTRL_SHUTDOWN, - hpre->qm.io_base + HPRE_MASTER_GLOBAL_CTRL); - - /* If bus lock, reset chip */ - ret = readl_relaxed_poll_timeout(hpre->qm.io_base + - HPRE_MASTER_TRANS_RETURN, val, - (val == MASTER_TRANS_RETURN_RW), - HPRE_REG_RD_INTVRL_US, - HPRE_REG_RD_TMOUT_US); - if (ret) { - dev_emerg(dev, "Bus lock! Please reset system.\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, HPRE_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable pf mse bit.\n"); - return ret; - } - - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(dev)) { - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(dev), "HRST", - NULL, &value); - if (ACPI_FAILURE(s)) { - dev_err(dev, "NO controller reset method!\n"); - return -EIO; - } - - if (value) { - dev_err(dev, "Reset step %llu failed!\n", value); - return -EIO; - } - } else { - dev_err(dev, "No reset method!\n"); - return -EINVAL; - } - - return 0; -} - -static int hpre_vf_reset_done(struct pci_dev *pdev) -{ - struct pci_dev *dev; - struct hisi_qm *qm; - struct hpre *hpre; - int ret = 0; - - mutex_lock(&hpre_list_lock); - list_for_each_entry(hpre, &hpre_list, list) { - dev = hpre->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hpre->qm; - - ret = hisi_qm_restart(qm); - if (ret) - goto reset_fail; - } - } - -reset_fail: - mutex_unlock(&hpre_list_lock); - return ret; -} - -static int hpre_controller_reset_done(struct hpre *hpre) -{ - struct hisi_qm *qm = &hpre->qm; - struct pci_dev *pdev = qm->pdev; - int ret; - - ret = hisi_qm_set_msi(qm, HPRE_ENABLE); - if (ret) { - dev_err(&pdev->dev, "Fails to enable peh msi bit!\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, HPRE_ENABLE); - if (ret) { - dev_err(&pdev->dev, "Fails to enable pf mse bit!\n"); - return ret; - } - - ret = hisi_qm_set_vf_mse(qm, HPRE_ENABLE); - if (ret) { - dev_err(&pdev->dev, "Fails to enable vf mse bit!\n"); - return ret; - } - - ret = hpre_set_user_domain_and_cache(hpre); - if (ret) - return ret; - - hisi_qm_restart_prepare(qm); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(&pdev->dev, "Failed to start QM!\n"); - return ret; - } - - if (hpre->num_vfs) - hpre_vf_q_assign(hpre, hpre->num_vfs); - - ret = hpre_vf_reset_done(pdev); - if (ret) { - dev_err(&pdev->dev, "Failed to start VFs!\n"); - return -EPERM; - } - - hisi_qm_restart_done(qm); - hpre_hw_err_init(hpre); - - return 0; -} - -static int hpre_controller_reset(struct hpre *hpre) -{ - struct device *dev = &hpre->qm.pdev->dev; - int ret; - - dev_info(dev, "Controller resetting...\n"); - - ret = hpre_controller_reset_prepare(hpre); - if (ret) - return ret; - - ret = hpre_soft_reset(hpre); - if (ret) { - dev_err(dev, "Controller reset failed (%d)\n", ret); - return ret; - } - - ret = hpre_controller_reset_done(hpre); - if (ret) - return ret; - - clear_bit(HPRE_RESET, &hpre->status); - dev_info(dev, "Controller reset complete\n"); - - return 0; -} - -static pci_ers_result_t hpre_slot_reset(struct pci_dev *pdev) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - int ret; - - if (pdev->is_virtfn) - return PCI_ERS_RESULT_RECOVERED; - - dev_info(&pdev->dev, "Requesting reset due to PCI error\n"); - pci_cleanup_aer_uncorrect_error_status(pdev); - - /* reset hpre controller */ - ret = hpre_controller_reset(hpre); - if (ret) { - dev_err(&pdev->dev, "hpre controller reset failed (%d)\n", - ret); - return PCI_ERS_RESULT_DISCONNECT; - } - - return PCI_ERS_RESULT_RECOVERED; -} - -static void hpre_set_hw_error(struct hpre *hisi_hpre, bool enable) -{ - struct pci_dev *pdev = hisi_hpre->qm.pdev; - struct hpre *hpre = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &hpre->qm; - - if (qm->fun_type == QM_HW_VF) - return; - - if (enable) { - hisi_qm_hw_error_init(qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT, - 0, QM_DB_RANDOM_INVALID); - hpre_hw_error_enable(hpre); - } else { - hisi_qm_hw_error_uninit(qm); - hpre_hw_error_disable(hpre); - } -} - -static int hpre_get_hw_error_status(struct hpre *hpre) -{ - u32 err_sts; - - err_sts = readl(hpre->qm.io_base + HPRE_HAC_INT_STATUS) & - (HPRE_CORE_ECC_2BIT_ERR | HPRE_OOO_ECC_2BIT_ERR); - if (err_sts) - return err_sts; - - return 0; -} - -/* check the interrupt is ecc-zbit error or not */ -static int hpre_check_hw_error(struct hpre *hisi_hpre) -{ - struct pci_dev *pdev = hisi_hpre->qm.pdev; - struct hpre *hpre = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &hpre->qm; - int ret; - - if (qm->fun_type == QM_HW_VF) - return 0; - - ret = hisi_qm_get_hw_error_status(qm); - if (ret) - return ret; - - /* Now the ecc-2bit is ce_err, so this func is always return 0 */ - return hpre_get_hw_error_status(hpre); -} - -static void hpre_reset_prepare(struct pci_dev *pdev) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hpre->qm; - struct device *dev = &pdev->dev; - u32 delay = 0; - int ret; - - hpre_set_hw_error(hpre, HPRE_HW_ERROR_IRQ_DISABLE); - - while (hpre_check_hw_error(hpre)) { - msleep(++delay); - if (delay > HPRE_RESET_WAIT_TIMEOUT) - return; - } - - ret = hpre_reset_prepare_rdy(hpre); - if (ret) { - dev_err(dev, "FLR not ready!\n"); - return; - } - - ret = hpre_vf_reset_prepare(pdev, QM_FLR); - if (ret) { - dev_err(&pdev->dev, "Fails to prepare reset!\n"); - return; - } - - ret = hisi_qm_stop(qm, QM_FLR); - if (ret) { - dev_err(&pdev->dev, "Fails to stop QM!\n"); - return; - } - - dev_info(dev, "FLR resetting...\n"); -} - -static bool hpre_flr_reset_complete(struct pci_dev *pdev) -{ - struct pci_dev *pf_pdev = pci_physfn(pdev); - struct hpre *hpre = pci_get_drvdata(pf_pdev); - struct device *dev = &hpre->qm.pdev->dev; - u32 id; - - pci_read_config_dword(hpre->qm.pdev, PCI_COMMAND, &id); - if (id == HPRE_PCI_COMMAND_INVALID) { - dev_err(dev, "Device HPRE can not be used!\n"); - return false; - } - - clear_bit(HPRE_RESET, &hpre->status); - return true; -} - -static void hpre_reset_done(struct pci_dev *pdev) -{ - struct hpre *hpre = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hpre->qm; - struct device *dev = &pdev->dev; - int ret; - - hpre_set_hw_error(hpre, HPRE_HW_ERROR_IRQ_ENABLE); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - return; - } - - if (pdev->is_physfn) { - ret = hpre_set_user_domain_and_cache(hpre); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - goto flr_done; - } - - hpre_hw_err_init(hpre); - - if (hpre->num_vfs) - hpre_vf_q_assign(hpre, hpre->num_vfs); - - ret = hpre_vf_reset_done(pdev); - if (ret) { - dev_err(&pdev->dev, "Failed to start VFs!\n"); - return; - } - } - -flr_done: - if (hpre_flr_reset_complete(pdev)) - dev_info(dev, "FLR reset complete\n"); -} - static const struct pci_error_handlers hpre_err_handler = { - .error_detected = hpre_error_detected, - .slot_reset = hpre_slot_reset, + .error_detected = hisi_qm_dev_err_detected, + .slot_reset = hisi_qm_dev_slot_reset, #ifdef CONFIG_CRYPTO_QM_UACCE - .reset_prepare = hpre_reset_prepare, - .reset_done = hpre_reset_done, + .reset_prepare = hisi_qm_reset_prepare, + .reset_done = hisi_qm_reset_done, #endif }; @@ -1605,7 +954,7 @@ static void hpre_reset_done(struct pci_dev *pdev) .remove = hpre_remove, .sriov_configure = hpre_sriov_configure, .err_handler = &hpre_err_handler, - .shutdown = hpre_shutdown, + .shutdown = hisi_qm_dev_shutdown, }; static void hpre_register_debugfs(void) @@ -1618,20 +967,19 @@ static void hpre_register_debugfs(void) hpre_debugfs_root = NULL; } -static void hpre_unregister_debugfs(void) -{ - debugfs_remove_recursive(hpre_debugfs_root); -} - static int __init hpre_init(void) { int ret; + INIT_LIST_HEAD(&hpre_devices.list); + mutex_init(&hpre_devices.lock); + hpre_devices.check = NULL; + hpre_register_debugfs(); ret = pci_register_driver(&hpre_pci_driver); if (ret) { - hpre_unregister_debugfs(); + debugfs_remove_recursive(hpre_debugfs_root); pr_err("hpre: can't register hisi hpre driver.\n"); } @@ -1641,7 +989,7 @@ static int __init hpre_init(void) static void __exit hpre_exit(void) { pci_unregister_driver(&hpre_pci_driver); - hpre_unregister_debugfs(); + debugfs_remove_recursive(hpre_debugfs_root); } module_init(hpre_init); diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 4bd7739..e89a770 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -1,6 +1,8 @@ // SPDX-License-Identifier: GPL-2.0 /* Copyright (c) 2018-2019 HiSilicon Limited. */ #include <asm/page.h> +#include <linux/acpi.h> +#include <linux/aer.h> #include <linux/bitmap.h> #include <linux/debugfs.h> #include <linux/dma-mapping.h> @@ -117,7 +119,7 @@ #define QM_ABNORMAL_INT_MASK 0x100004 #define QM_HW_ERROR_IRQ_DISABLE GENMASK(12, 0) #define QM_ABNORMAL_INT_STATUS 0x100008 -#define QM_ABNORMAL_INT_SET 0x10000c +#define QM_PF_ABNORMAL_INT_SET 0x10000c #define QM_ABNORMAL_INF00 0x100010 #define QM_FIFO_OVERFLOW_TYPE 0xc0 #define QM_FIFO_OVERFLOW_VF 0x3f @@ -167,17 +169,30 @@ #define TASK_TIMEOUT 10000 #define WAIT_PERIOD 20 -#define MAX_WAIT_COUNTS 1000 #define WAIT_PERIOD_US_MAX 200 #define WAIT_PERIOD_US_MIN 100 -#define MAX_WAIT_TASK_COUNTS 10 - -#define QM_RAS_NFE_MBIT_DISABLE ~QM_ECC_MBIT +#define REMOVE_WAIT_DELAY 10 +#define MAX_WAIT_COUNTS 1000 +#define DELAY_PERIOD_MS 100 +#define QM_DEV_RESET_STATUS 0 +#define QM_RESET_WAIT_TIMEOUT 400 +#define QM_PCI_COMMAND_INVALID 0xFFFFFFFF +#define MASTER_GLOBAL_CTRL_SHUTDOWN 0x1 +#define MASTER_TRANS_RETURN_RW 3 +#define MASTER_TRANS_RETURN 0x300150 +#define MASTER_GLOBAL_CTRL 0x300000 +#define QM_REG_RD_INTVRL_US 10 +#define QM_REG_RD_TMOUT_US 1000 +#define AM_CFG_PORT_RD_EN 0x300018 #define AM_CFG_PORT_WR_EN 0x30001C -#define AM_CFG_PORT_WR_EN_VALUE 0xFFFF +#define QM_RAS_NFE_MBIT_DISABLE ~QM_ECC_MBIT #define AM_ROB_ECC_INT_STS 0x300104 #define ROB_ECC_ERR_MULTPL BIT(1) +#define QM_DBG_READ_LEN 256 +#define QM_DBG_WRITE_LEN 1024 +#define QM_DBG_SHOW_SHIFT 16 + #define QM_MK_CQC_DW3_V1(hop_num, pg_sz, buf_sz, cqe_sz) \ (((hop_num) << QM_CQ_HOP_NUM_SHIFT) | \ ((pg_sz) << QM_CQ_PAGE_SIZE_SHIFT) | \ @@ -219,6 +234,12 @@ enum vft_type { CQC_VFT, }; +struct hisi_qm_resource { + struct hisi_qm *qm; + int distance; + struct list_head list; +}; + struct hisi_qm_hw_ops { int (*get_vft)(struct hisi_qm *qm, u32 *base, u32 *number); void (*qm_db)(struct hisi_qm *qm, u16 qn, @@ -237,11 +258,6 @@ struct hisi_qm_hw_ops { [QM_STATE] = "qm_state", }; -struct hisi_qm_hw_error { - u32 int_msk; - const char *msg; -}; - static const struct hisi_qm_hw_error qm_hw_error[] = { { .int_msk = BIT(0), .msg = "qm_axi_rresp" }, { .int_msk = BIT(1), .msg = "qm_axi_bresp" }, @@ -1115,13 +1131,20 @@ static void qm_hw_error_init_v2(struct hisi_qm *qm, u32 ce, u32 nfe, u32 fe, { u32 irq_enable = ce | nfe | fe | msi; u32 irq_unmask = ~irq_enable; + u32 error_status; qm->error_mask = ce | nfe | fe; qm->msi_mask = msi; /* clear QM hw residual error source */ - writel(QM_ABNORMAL_INT_SOURCE_CLR, qm->io_base + - QM_ABNORMAL_INT_SOURCE); + error_status = readl(qm->io_base + QM_ABNORMAL_INT_STATUS); + if (!(qm->hw_status & BIT(QM_DEV_RESET_STATUS)) + || !error_status) + error_status = QM_ABNORMAL_INT_SOURCE_CLR; + else + error_status &= qm->error_mask; + + writel(error_status, qm->io_base + QM_ABNORMAL_INT_SOURCE); /* configure error type */ writel(ce, qm->io_base + QM_RAS_CE_ENABLE); @@ -1190,9 +1213,7 @@ static pci_ers_result_t qm_hw_error_handle_v2(struct hisi_qm *qm) error_status = qm->error_mask & tmp; if (error_status) { if (error_status & QM_ECC_MBIT) - qm->err_ini.is_qm_ecc_mbit = 1; - else - qm->err_ini.is_qm_ecc_mbit = 0; + qm->err_ini.err_info.is_qm_ecc_mbit = true; qm_log_hw_error(qm, error_status); return PCI_ERS_RESULT_NEED_RESET; @@ -1513,7 +1534,8 @@ static void qm_qp_has_no_task(struct hisi_qp *qp) int i = 0; int ret; - if (qp->qm->err_ini.is_qm_ecc_mbit || qp->qm->err_ini.is_dev_ecc_mbit) + if (qp->qm->err_ini.err_info.is_qm_ecc_mbit || + qp->qm->err_ini.err_info.is_dev_ecc_mbit) return; addr = qm_ctx_alloc(qp->qm, size, &dma_addr); @@ -1967,6 +1989,74 @@ static int qm_unregister_uacce(struct hisi_qm *qm) #endif /** + * hisi_qm_frozen() - Try to froze QM to cut continuous queue request. If + * there is user on the QM, return failure without doing anything. + * @qm: The qm needed to be fronzen. + * + * This function frozes QM, then we can do SRIOV disabling. + */ +static int hisi_qm_frozen(struct hisi_qm *qm) +{ + int count, i; + + down_write(&qm->qps_lock); + for (i = 0, count = 0; i < qm->qp_num; i++) + if (!qm->qp_array[i]) + count++; + + if (count == qm->qp_num) { + bitmap_set(qm->qp_bitmap, 0, qm->qp_num); + } else { + up_write(&qm->qps_lock); + return -EBUSY; + } + up_write(&qm->qps_lock); + + return 0; +} + +static int qm_try_frozen_vfs(struct pci_dev *pdev, + struct hisi_qm_list *qm_list) +{ + struct hisi_qm *qm, *vf_qm; + struct pci_dev *dev; + int ret = 0; + + if (!qm_list || !pdev) + return -EINVAL; + + /* Try to frozen all the VFs as disable SRIOV */ + mutex_lock(&qm_list->lock); + list_for_each_entry(qm, &qm_list->list, list) { + dev = qm->pdev; + if (dev == pdev) + continue; + if (pci_physfn(dev) == pdev) { + vf_qm = pci_get_drvdata(dev); + ret = hisi_qm_frozen(vf_qm); + if (ret) + goto frozen_fail; + } + } + +frozen_fail: + mutex_unlock(&qm_list->lock); + return ret; +} + +void hisi_qm_remove_wait_delay(struct hisi_qm *qm, + struct hisi_qm_list *qm_list) +{ + while (hisi_qm_frozen(qm) || + ((qm->fun_type == QM_HW_PF) && + qm_try_frozen_vfs(qm->pdev, qm_list))) { + msleep(WAIT_PERIOD); + } + udelay(REMOVE_WAIT_DELAY); +} +EXPORT_SYMBOL_GPL(hisi_qm_remove_wait_delay); + +/** * hisi_qm_init() - Initialize configures about qm. * @qm: The qm needed init. * @@ -2107,32 +2197,21 @@ void hisi_qm_uninit(struct hisi_qm *qm) EXPORT_SYMBOL_GPL(hisi_qm_uninit); /** - * hisi_qm_frozen() - Try to froze QM to cut continuous queue request. If - * there is user on the QM, return failure without doing anything. - * @qm: The qm needed to be fronzen. + * hisi_qm_dev_shutdown() - shutdown device. + * @pdev: The device will be shutdown. * - * This function frozes QM, then we can do SRIOV disabling. + * This function will stop qm when OS shutdown or rebooting. */ -int hisi_qm_frozen(struct hisi_qm *qm) +void hisi_qm_dev_shutdown(struct pci_dev *pdev) { - int count, i; - - down_write(&qm->qps_lock); - for (i = 0, count = 0; i < qm->qp_num; i++) - if (!qm->qp_array[i]) - count++; - - if (count == qm->qp_num) { - bitmap_set(qm->qp_bitmap, 0, qm->qp_num); - } else { - up_write(&qm->qps_lock); - return -EBUSY; - } - up_write(&qm->qps_lock); + struct hisi_qm *qm = pci_get_drvdata(pdev); + int ret; - return 0; + ret = hisi_qm_stop(qm, QM_NORMAL); + if (ret) + dev_err(&pdev->dev, "Fail to stop qm in shutdown!\n"); } -EXPORT_SYMBOL_GPL(hisi_qm_frozen); +EXPORT_SYMBOL_GPL(hisi_qm_dev_shutdown); /** * hisi_qm_get_vft() - Get vft from a qm. @@ -2174,7 +2253,7 @@ int hisi_qm_get_vft(struct hisi_qm *qm, u32 *base, u32 *number) * Assign queues A~B to VF: hisi_qm_set_vft(qm, 2, A, B - A + 1) * (VF function number 0x2) */ -int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base, +static int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base, u32 number) { u32 max_q_num = qm->ctrl_q_num; @@ -2185,7 +2264,6 @@ int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base, return qm_set_sqc_cqc_vft(qm, fun_num, base, number); } -EXPORT_SYMBOL_GPL(hisi_qm_set_vft); static void qm_init_eq_aeq_status(struct hisi_qm *qm) { @@ -2483,6 +2561,28 @@ static int qm_stop_started_qp(struct hisi_qm *qm) } /** + * qm_clear_queues() - Clear memory of queues in a qm. + * @qm: The qm which memory needs clear. + * + * This function clears all queues memory in a qm. Reset of accelerator can + * use this to clear queues. + */ +static void qm_clear_queues(struct hisi_qm *qm) +{ + struct hisi_qp *qp; + int i; + + for (i = 0; i < qm->qp_num; i++) { + qp = qm->qp_array[i]; + if (qp) + /* device state use the last page */ + memset(qp->qdma.va, 0, qp->qdma.size - PAGE_SIZE); + } + + memset(qm->qdma.va, 0, qm->qdma.size); +} + +/** * hisi_qm_stop() - Stop a qm. * @qm: The qm which will be stopped. * @r: The reason to stop qm. @@ -2528,7 +2628,7 @@ int hisi_qm_stop(struct hisi_qm *qm, enum qm_stop_reason r) } } - hisi_qm_clear_queues(qm); + qm_clear_queues(qm); atomic_set(&qm->status.flags, QM_STOP); err_unlock: @@ -2589,7 +2689,7 @@ int hisi_qm_debug_init(struct hisi_qm *qm) goto failed_to_create; } - qm_regs = debugfs_create_file("qm_regs", 0444, qm->debug.qm_d, qm, + qm_regs = debugfs_create_file("regs", 0444, qm->debug.qm_d, qm, &qm_regs_fops); if (IS_ERR(qm_regs)) { ret = -ENOENT; @@ -2605,7 +2705,7 @@ int hisi_qm_debug_init(struct hisi_qm *qm) EXPORT_SYMBOL_GPL(hisi_qm_debug_init); /** - * hisi_qm_hw_error_init() - Configure qm hardware error report method. + * qm_hw_error_init() - Configure qm hardware error report method. * @qm: The qm which we want to configure. * @ce: Correctable error configure. * @nfe: Non-fatal error configure. @@ -2622,9 +2722,13 @@ int hisi_qm_debug_init(struct hisi_qm *qm) * related report methods. Error report will be masked if related error bit * does not configure. */ -void hisi_qm_hw_error_init(struct hisi_qm *qm, u32 ce, u32 nfe, u32 fe, - u32 msi) +static void qm_hw_error_init(struct hisi_qm *qm) { + u32 nfe = qm->err_ini.err_info.nfe; + u32 msi = qm->err_ini.err_info.msi; + u32 ce = qm->err_ini.err_info.ce; + u32 fe = qm->err_ini.err_info.fe; + if (!qm->ops->hw_error_init) { dev_err(&qm->pdev->dev, "QM version %d doesn't support hw error handling!\n", @@ -2634,9 +2738,8 @@ void hisi_qm_hw_error_init(struct hisi_qm *qm, u32 ce, u32 nfe, u32 fe, qm->ops->hw_error_init(qm, ce, nfe, fe, msi); } -EXPORT_SYMBOL_GPL(hisi_qm_hw_error_init); -void hisi_qm_hw_error_uninit(struct hisi_qm *qm) +static void qm_hw_error_uninit(struct hisi_qm *qm) { if (!qm->ops->hw_error_uninit) { dev_err(&qm->pdev->dev, @@ -2647,15 +2750,14 @@ void hisi_qm_hw_error_uninit(struct hisi_qm *qm) qm->ops->hw_error_uninit(qm); } -EXPORT_SYMBOL_GPL(hisi_qm_hw_error_uninit); /** - * hisi_qm_hw_error_handle() - Handle qm non-fatal hardware errors. + * qm_hw_error_handle() - Handle qm non-fatal hardware errors. * @qm: The qm which has non-fatal hardware errors. * * Accelerators use this function to handle qm non-fatal hardware errors. */ -pci_ers_result_t hisi_qm_hw_error_handle(struct hisi_qm *qm) +static pci_ers_result_t qm_hw_error_handle(struct hisi_qm *qm) { if (!qm->ops->hw_error_handle) { dev_err(&qm->pdev->dev, @@ -2666,104 +2768,19 @@ pci_ers_result_t hisi_qm_hw_error_handle(struct hisi_qm *qm) return qm->ops->hw_error_handle(qm); } -EXPORT_SYMBOL_GPL(hisi_qm_hw_error_handle); - -/** - * hisi_qm_clear_queues() - Clear memory of queues in a qm. - * @qm: The qm which memory needs clear. - * - * This function clears all queues memory in a qm. Reset of accelerator can - * use this to clear queues. - */ -void hisi_qm_clear_queues(struct hisi_qm *qm) -{ - struct hisi_qp *qp; - int i; - - for (i = 0; i < qm->qp_num; i++) { - qp = qm->qp_array[i]; - if (qp) - /* device state use the last page */ - memset(qp->qdma.va, 0, qp->qdma.size - PAGE_SIZE); - } - - memset(qm->qdma.va, 0, qm->qdma.size); -} -EXPORT_SYMBOL_GPL(hisi_qm_clear_queues); - -/** - * hisi_qm_get_hw_version() - Get hardware version of a qm. - * @pdev: The device which hardware version we want to get. - * - * This function gets the hardware version of a qm. Return QM_HW_UNKNOWN - * if the hardware version is not supported. - */ -enum qm_hw_ver hisi_qm_get_hw_version(struct pci_dev *pdev) -{ - switch (pdev->revision) { - case QM_HW_V1: - case QM_HW_V2: - return pdev->revision; - default: - return QM_HW_UNKNOWN; - } -} -EXPORT_SYMBOL_GPL(hisi_qm_get_hw_version); -int hisi_qm_get_hw_error_status(struct hisi_qm *qm) +static int qm_get_hw_error_status(struct hisi_qm *qm) { u32 err_sts; - err_sts = readl(qm->io_base + QM_ABNORMAL_INT_STATUS) & - QM_ECC_MBIT; + err_sts = readl(qm->io_base + QM_ABNORMAL_INT_STATUS) & QM_ECC_MBIT; if (err_sts) return err_sts; return 0; } -EXPORT_SYMBOL_GPL(hisi_qm_get_hw_error_status); - -static pci_ers_result_t hisi_qm_dev_err_handle(struct hisi_qm *qm) -{ - u32 err_sts; - - if (!qm->err_ini.get_dev_hw_err_status || - !qm->err_ini.log_dev_hw_err) - return PCI_ERS_RESULT_RECOVERED; - - /* read err sts */ - err_sts = qm->err_ini.get_dev_hw_err_status(qm); - if (err_sts) { - if (err_sts & qm->err_ini.ecc_2bits_mask) - qm->err_ini.is_dev_ecc_mbit = 1; - else - qm->err_ini.is_dev_ecc_mbit = 0; - - qm->err_ini.log_dev_hw_err(qm, err_sts); - return PCI_ERS_RESULT_NEED_RESET; - } - - return PCI_ERS_RESULT_RECOVERED; -} - -pci_ers_result_t hisi_qm_process_dev_error(struct pci_dev *pdev) -{ - struct hisi_qm *qm = pci_get_drvdata(pdev); - pci_ers_result_t qm_ret, dev_ret; - - /* log qm error */ - qm_ret = hisi_qm_hw_error_handle(qm); - - /* log device error */ - dev_ret = hisi_qm_dev_err_handle(qm); - - return (qm_ret == PCI_ERS_RESULT_NEED_RESET || - dev_ret == PCI_ERS_RESULT_NEED_RESET) ? - PCI_ERS_RESULT_NEED_RESET : PCI_ERS_RESULT_RECOVERED; -} -EXPORT_SYMBOL_GPL(hisi_qm_process_dev_error); -int hisi_qm_reg_test(struct hisi_qm *qm) +static int qm_reg_test(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; int ret; @@ -2782,16 +2799,13 @@ int hisi_qm_reg_test(struct hisi_qm *qm) ret = readl_relaxed_poll_timeout(qm->io_base + QM_PEH_VENDOR_ID, val, (val == PCI_VENDOR_ID_HUAWEI), POLL_PERIOD, POLL_TIMEOUT); - if (ret) { + if (ret) dev_err(&pdev->dev, "Fails to read QM reg in the second time!\n"); - return ret; - } return ret; } -EXPORT_SYMBOL_GPL(hisi_qm_reg_test); -int hisi_qm_set_pf_mse(struct hisi_qm *qm, bool set) +static int qm_set_pf_mse(struct hisi_qm *qm, bool set) { struct pci_dev *pdev = qm->pdev; u16 cmd; @@ -2814,9 +2828,8 @@ int hisi_qm_set_pf_mse(struct hisi_qm *qm, bool set) return -ETIMEDOUT; } -EXPORT_SYMBOL_GPL(hisi_qm_set_pf_mse); -int hisi_qm_set_vf_mse(struct hisi_qm *qm, bool set) +static int qm_set_vf_mse(struct hisi_qm *qm, bool set) { struct pci_dev *pdev = qm->pdev; u16 sriov_ctrl; @@ -2833,8 +2846,8 @@ int hisi_qm_set_vf_mse(struct hisi_qm *qm, bool set) for (i = 0; i < MAX_WAIT_COUNTS; i++) { pci_read_config_word(pdev, pos + PCI_SRIOV_CTRL, &sriov_ctrl); - if (set == ((sriov_ctrl & PCI_SRIOV_CTRL_MSE) >> - PEH_SRIOV_CTRL_VF_MSE_SHIFT)) + if (set == (sriov_ctrl & PCI_SRIOV_CTRL_MSE) >> + PEH_SRIOV_CTRL_VF_MSE_SHIFT) return 0; udelay(1); @@ -2842,9 +2855,8 @@ int hisi_qm_set_vf_mse(struct hisi_qm *qm, bool set) return -ETIMEDOUT; } -EXPORT_SYMBOL_GPL(hisi_qm_set_vf_mse); -int hisi_qm_set_msi(struct hisi_qm *qm, bool set) +static int qm_set_msi(struct hisi_qm *qm, bool set) { struct pci_dev *pdev = qm->pdev; @@ -2854,7 +2866,8 @@ int hisi_qm_set_msi(struct hisi_qm *qm, bool set) } else { pci_write_config_dword(pdev, pdev->msi_cap + PCI_MSI_MASK_64, PEH_MSI_DISABLE); - if (qm->err_ini.is_qm_ecc_mbit || qm->err_ini.is_dev_ecc_mbit) + if (qm->err_ini.err_info.is_qm_ecc_mbit || + qm->err_ini.err_info.is_dev_ecc_mbit) return 0; mdelay(1); @@ -2864,64 +2877,768 @@ int hisi_qm_set_msi(struct hisi_qm *qm, bool set) return 0; } -EXPORT_SYMBOL_GPL(hisi_qm_set_msi); -void hisi_qm_set_ecc(struct hisi_qm *qm) +void hisi_qm_free_qps(struct hisi_qp **qps, int qp_num) { - u32 nfe_enb; + int i; - if ((!qm->err_ini.is_qm_ecc_mbit && !qm->err_ini.is_dev_ecc_mbit) || - (qm->err_ini.is_qm_ecc_mbit && !qm->err_ini.inject_dev_hw_err) || - (qm->err_ini.is_dev_ecc_mbit && qm->err_ini.inject_dev_hw_err)) + if (!qps || qp_num < 0) return; - if (qm->err_ini.inject_dev_hw_err) - qm->err_ini.inject_dev_hw_err(qm); - else { - nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE); - writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE, - qm->io_base + QM_RAS_NFE_ENABLE); - writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SET); - qm->err_ini.is_qm_ecc_mbit = 1; + for (i = qp_num - 1; i >= 0; i--) + hisi_qm_release_qp(qps[i]); +} +EXPORT_SYMBOL_GPL(hisi_qm_free_qps); + +static void free_list(struct list_head *head) +{ + struct hisi_qm_resource *res, *tmp; + + list_for_each_entry_safe(res, tmp, head, list) { + list_del(&res->list); + kfree(res); } } -EXPORT_SYMBOL_GPL(hisi_qm_set_ecc); -void hisi_qm_restart_prepare(struct hisi_qm *qm) +static int hisi_qm_sort_devices(int node, struct list_head *head, + struct hisi_qm_list *qm_list) { - if (!qm->err_ini.is_qm_ecc_mbit && !qm->err_ini.is_dev_ecc_mbit) - return; + struct hisi_qm_resource *res, *tmp; + struct hisi_qm *qm; + struct list_head *n; + struct device *dev; + int dev_node = 0; + + list_for_each_entry(qm, &qm_list->list, list) { + dev = &qm->pdev->dev; + + if (IS_ENABLED(CONFIG_NUMA)) { + dev_node = dev->numa_node; + if (dev_node < 0) + dev_node = 0; + } - /* close AM wr msi port */ - writel(qm->err_ini.qm_wr_port, qm->io_base + AM_CFG_PORT_WR_EN); + if (qm_list->check && !qm_list->check(qm)) + continue; + + res = kzalloc(sizeof(*res), GFP_KERNEL); + if (!res) + return -ENOMEM; - /* clear dev ecc 2bit error source */ - if (qm->err_ini.clear_dev_hw_err_status) { - qm->err_ini.clear_dev_hw_err_status(qm, - qm->err_ini.ecc_2bits_mask); + res->qm = qm; + res->distance = node_distance(dev_node, node); + n = head; + list_for_each_entry(tmp, head, list) { + if (res->distance < tmp->distance) { + n = &tmp->list; + break; + } + } + list_add_tail(&res->list, n); } - /* clear QM ecc mbit error source */ - writel(QM_ECC_MBIT, qm->io_base + QM_ABNORMAL_INT_SOURCE); + return 0; +} - /* clear AM Reorder Buffer ecc mbit source */ - writel(ROB_ECC_ERR_MULTPL, qm->io_base + AM_ROB_ECC_INT_STS); +int hisi_qm_alloc_qps_node(int node, struct hisi_qm_list *qm_list, + struct hisi_qp **qps, int qp_num, u8 alg_type) +{ + struct hisi_qm_resource *tmp; + int ret = -ENODEV; + LIST_HEAD(head); + int i; - if (qm->err_ini.open_axi_master_ooo) - qm->err_ini.open_axi_master_ooo(qm); + if (!qps || !qm_list || qp_num <= 0) + return -EINVAL; + + mutex_lock(&qm_list->lock); + if (hisi_qm_sort_devices(node, &head, qm_list)) { + mutex_unlock(&qm_list->lock); + goto err; + } + + list_for_each_entry(tmp, &head, list) { + for (i = 0; i < qp_num; i++) { + qps[i] = hisi_qm_create_qp(tmp->qm, alg_type); + if (IS_ERR(qps[i])) { + hisi_qm_free_qps(qps, i); + break; + } + } + + if (i == qp_num) { + ret = 0; + break; + } + } + + mutex_unlock(&qm_list->lock); + if (ret) + pr_info("Failed to create qps, node[%d], alg[%d], qp[%d]!\n", + node, alg_type, qp_num); + +err: + free_list(&head); + return ret; } -EXPORT_SYMBOL_GPL(hisi_qm_restart_prepare); +EXPORT_SYMBOL_GPL(hisi_qm_alloc_qps_node); -void hisi_qm_restart_done(struct hisi_qm *qm) +static int qm_vf_q_assign(struct hisi_qm *qm, u32 num_vfs) { - if (!qm->err_ini.is_qm_ecc_mbit && !qm->err_ini.is_dev_ecc_mbit) - return; + u32 q_num, i, remain_q_num; + u32 q_base = qm->qp_num; + int ret; + + if (!num_vfs) + return -EINVAL; + + remain_q_num = qm->ctrl_q_num - qm->qp_num; + + /* If remain queues not enough, return error. */ + if (qm->ctrl_q_num < qm->qp_num || remain_q_num < num_vfs) + return -EINVAL; + + q_num = remain_q_num / num_vfs; + for (i = 1; i <= num_vfs; i++) { + if (i == num_vfs) + q_num += remain_q_num % num_vfs; + ret = hisi_qm_set_vft(qm, i, q_base, q_num); + if (ret) + return ret; + q_base += q_num; + } + + return 0; +} + +static int qm_clear_vft_config(struct hisi_qm *qm) +{ + int ret; + u32 i; + + for (i = 1; i <= qm->vfs_num; i++) { + ret = hisi_qm_set_vft(qm, i, 0, 0); + if (ret) + return ret; + } + qm->vfs_num = 0; + + return 0; +} + +int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + int pre_existing_vfs, num_vfs, ret; + + pre_existing_vfs = pci_num_vf(pdev); + if (pre_existing_vfs) { + pci_err(pdev, + "Can't enable VF. Please disable pre-enabled VFs!\n"); + return 0; + } + + num_vfs = min_t(int, max_vfs, QM_MAX_VFS_NUM); + ret = qm_vf_q_assign(qm, num_vfs); + if (ret) { + pci_err(pdev, "Can't assign queues for VF!\n"); + return ret; + } + + qm->vfs_num = num_vfs; + + ret = pci_enable_sriov(pdev, num_vfs); + if (ret) { + pci_err(pdev, "Can't enable VF!\n"); + qm_clear_vft_config(qm); + return ret; + } + + pci_info(pdev, "VF enabled, vfs_num(=%d)!\n", num_vfs); + + return num_vfs; +} +EXPORT_SYMBOL_GPL(hisi_qm_sriov_enable); + +int hisi_qm_sriov_disable(struct pci_dev *pdev, struct hisi_qm_list *qm_list) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + + if (pci_vfs_assigned(pdev)) { + pci_err(pdev, "Failed to disable VFs as VFs are assigned!\n"); + return -EPERM; + } + + /* While VF is in used, SRIOV cannot be disabled. + * However, there is a risk that the behavior is uncertain if the + * device is in hardware resetting. + */ + if (qm_list && qm_try_frozen_vfs(pdev, qm_list)) { + pci_err(pdev, "Uacce user space task is using its VF!\n"); + return -EBUSY; + } + + /* remove in hpre_pci_driver will be called to free VF resources */ + pci_disable_sriov(pdev); + return qm_clear_vft_config(qm); +} +EXPORT_SYMBOL_GPL(hisi_qm_sriov_disable); + +void hisi_qm_dev_err_init(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev)); + + if (pf_qm->fun_type == QM_HW_VF) + return; + + qm_hw_error_init(pf_qm); + pf_qm->err_ini.hw_err_enable(pf_qm); +} +EXPORT_SYMBOL_GPL(hisi_qm_dev_err_init); + +/** + * hisi_qm_dev_err_uninit() - Uninitialize device error configuration. + * @qm: The qm for which we want to do error uninitialization. + * + * Uninitialize QM and device error related configuration, It may called + * by PF/VF, the caller should ensure the scene explicilty. + */ +void hisi_qm_dev_err_uninit(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev)); + + if (pf_qm->fun_type == QM_HW_VF) + return; + + qm_hw_error_uninit(pf_qm); + pf_qm->err_ini.hw_err_disable(pf_qm); +} +EXPORT_SYMBOL_GPL(hisi_qm_dev_err_uninit); + +static pci_ers_result_t qm_dev_err_handle(struct hisi_qm *qm) +{ + u32 err_sts; + + /* read err sts */ + err_sts = qm->err_ini.get_dev_hw_err_status(qm); + if (err_sts) { + if (err_sts & qm->err_ini.err_info.ecc_2bits_mask) + qm->err_ini.err_info.is_dev_ecc_mbit = true; + + qm->err_ini.log_dev_hw_err(qm, err_sts); + return PCI_ERS_RESULT_NEED_RESET; + } + + return PCI_ERS_RESULT_RECOVERED; +} + +pci_ers_result_t hisi_qm_process_dev_error(struct pci_dev *pdev) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + pci_ers_result_t qm_ret, dev_ret; + + /* log qm error */ + qm_ret = qm_hw_error_handle(qm); + + /* log device error */ + dev_ret = qm_dev_err_handle(qm); + + return (qm_ret == PCI_ERS_RESULT_NEED_RESET || + dev_ret == PCI_ERS_RESULT_NEED_RESET) ? + PCI_ERS_RESULT_NEED_RESET : PCI_ERS_RESULT_RECOVERED; +} +EXPORT_SYMBOL_GPL(hisi_qm_process_dev_error); + +pci_ers_result_t hisi_qm_dev_err_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + if (pdev->is_virtfn) + return PCI_ERS_RESULT_NONE; + + pci_info(pdev, "PCI error detected, state(=%d)!!\n", state); + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + return hisi_qm_process_dev_error(pdev); +} +EXPORT_SYMBOL_GPL(hisi_qm_dev_err_detected); + +static int qm_vf_reset_prepare(struct pci_dev *pdev, + struct hisi_qm_list *qm_list, + enum qm_stop_reason stop_reason) +{ + struct pci_dev *dev; + struct hisi_qm *qm; + int ret = 0; + + mutex_lock(&qm_list->lock); + list_for_each_entry(qm, &qm_list->list, list) { + dev = qm->pdev; + if (dev == pdev) + continue; + + if (pci_physfn(dev) == pdev) { + /* save VFs PCIE BAR configuration */ + pci_save_state(dev); + + ret = hisi_qm_stop(qm, stop_reason); + if (ret) + goto prepare_fail; + } + } + +prepare_fail: + mutex_unlock(&qm_list->lock); + return ret; +} + +static int qm_reset_prepare_ready(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev)); + int delay = 0; + + while (test_and_set_bit(QM_DEV_RESET_STATUS, &pf_qm->hw_status)) { + msleep(++delay); + if (delay > QM_RESET_WAIT_TIMEOUT) + return -EBUSY; + } + + return 0; +} + +static int qm_controller_reset_prepare(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + int ret; + + ret = qm_reset_prepare_ready(qm); + if (ret) { + pci_err(pdev, "Controller reset not ready!\n"); + return ret; + } + + if (qm->vfs_num) { + ret = qm_vf_reset_prepare(pdev, qm->qm_list, QM_SOFT_RESET); + if (ret) { + pci_err(pdev, "Fails to stop VFs!\n"); + return ret; + } + } + + ret = hisi_qm_stop(qm, QM_SOFT_RESET); + if (ret) { + pci_err(pdev, "Fails to stop QM!\n"); + return ret; + } + +#ifdef CONFIG_CRYPTO_QM_UACCE + if (qm->use_uacce) { + ret = uacce_hw_err_isolate(&qm->uacce); + if (ret) { + pci_err(pdev, "Fails to isolate hw err!\n"); + return ret; + } + } +#endif + + return 0; +} + +static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm) +{ + u32 nfe_enb = 0; + + if (!qm->err_ini.err_info.is_dev_ecc_mbit && + qm->err_ini.err_info.is_qm_ecc_mbit && + qm->err_ini.close_axi_master_ooo) { + + qm->err_ini.close_axi_master_ooo(qm); + + } else if (qm->err_ini.err_info.is_dev_ecc_mbit && + !qm->err_ini.err_info.is_qm_ecc_mbit && + !qm->err_ini.close_axi_master_ooo) { + + nfe_enb = readl(qm->io_base + QM_RAS_NFE_ENABLE); + writel(nfe_enb & QM_RAS_NFE_MBIT_DISABLE, + qm->io_base + QM_RAS_NFE_ENABLE); + writel(QM_ECC_MBIT, qm->io_base + QM_PF_ABNORMAL_INT_SET); + } +} + +static int qm_soft_reset(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + int ret; + u32 val; + + ret = qm_reg_test(qm); + if (ret) + return ret; + + if (qm->vfs_num) { + ret = qm_set_vf_mse(qm, false); + if (ret) { + pci_err(pdev, "Fails to disable vf mse bit.\n"); + return ret; + } + } + + ret = qm_set_msi(qm, false); + if (ret) { + pci_err(pdev, "Fails to disable peh msi bit.\n"); + return ret; + } + + qm_dev_ecc_mbit_handle(qm); + + mdelay(DELAY_PERIOD_MS); + + /* OOO register set and check */ + writel(MASTER_GLOBAL_CTRL_SHUTDOWN, qm->io_base + MASTER_GLOBAL_CTRL); + + /* If bus lock, reset chip */ + ret = readl_relaxed_poll_timeout(qm->io_base + MASTER_TRANS_RETURN, + val, (val == MASTER_TRANS_RETURN_RW), + QM_REG_RD_INTVRL_US, + QM_REG_RD_TMOUT_US); + if (ret) { + pci_emerg(pdev, "Bus lock! Please reset system.\n"); + return ret; + } + + ret = qm_set_pf_mse(qm, false); + if (ret) { + pci_err(pdev, "Fails to disable pf mse bit.\n"); + return ret; + } + + /* The reset related sub-control registers are not in PCI BAR */ + if (ACPI_HANDLE(&pdev->dev)) { + unsigned long long value = 0; + acpi_status s; + + s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), + qm->err_ini.err_info.acpi_rst, + NULL, &value); + if (ACPI_FAILURE(s)) { + pci_err(pdev, "NO controller reset method!\n"); + return -EIO; + } + + if (value) { + pci_err(pdev, "Reset step %llu failed!\n", value); + return -EIO; + } + } else { + pci_err(pdev, "No reset method!\n"); + return -EINVAL; + } + + return 0; +} + +static int qm_vf_reset_done(struct pci_dev *pdev, + struct hisi_qm_list *qm_list) +{ + struct pci_dev *dev; + struct hisi_qm *qm; + int ret = 0; + + mutex_lock(&qm_list->lock); + list_for_each_entry(qm, &qm_list->list, list) { + dev = qm->pdev; + if (dev == pdev) + continue; + + if (pci_physfn(dev) == pdev) { + /* enable VFs PCIE BAR configuration */ + pci_restore_state(dev); + + ret = hisi_qm_restart(qm); + if (ret) + goto reset_fail; + } + } + +reset_fail: + mutex_unlock(&qm_list->lock); + return ret; +} + +static int qm_get_dev_err_status(struct hisi_qm *qm) +{ + u32 err_sts; + + err_sts = qm->err_ini.get_dev_hw_err_status(qm) & + qm->err_ini.err_info.ecc_2bits_mask; + if (err_sts) + return err_sts; + + return 0; +} + +static void hisi_qm_restart_prepare(struct hisi_qm *qm) +{ + u32 value; + + if (!qm->err_ini.err_info.is_qm_ecc_mbit && + !qm->err_ini.err_info.is_dev_ecc_mbit) + return; + + value = readl(qm->io_base + AM_CFG_PORT_WR_EN); + writel(value & ~qm->err_ini.err_info.msi_wr_port, + qm->io_base + AM_CFG_PORT_WR_EN); + + /* clear dev ecc 2bit error source if having */ + value = qm_get_dev_err_status(qm); + if (value && qm->err_ini.clear_dev_hw_err_status) + qm->err_ini.clear_dev_hw_err_status(qm, value); + + /* clear QM ecc mbit error source */ + writel(QM_ECC_MBIT, qm->io_base + + QM_ABNORMAL_INT_SOURCE); + + /* clear AM Reorder Buffer ecc mbit source */ + writel(ROB_ECC_ERR_MULTPL, qm->io_base + + AM_ROB_ECC_INT_STS); + + if (qm->err_ini.open_axi_master_ooo) + qm->err_ini.open_axi_master_ooo(qm); +} + +static void hisi_qm_restart_done(struct hisi_qm *qm) +{ + u32 value; + + if (!qm->err_ini.err_info.is_qm_ecc_mbit && + !qm->err_ini.err_info.is_dev_ecc_mbit) + return; + + value = readl(qm->io_base + AM_CFG_PORT_WR_EN); + value |= qm->err_ini.err_info.msi_wr_port; + + writel(value, qm->io_base + AM_CFG_PORT_WR_EN); + qm->err_ini.err_info.is_qm_ecc_mbit = false; + qm->err_ini.err_info.is_dev_ecc_mbit = false; +} + +static int qm_controller_reset_done(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + int ret; + + ret = qm_set_msi(qm, true); + if (ret) { + pci_err(pdev, "Fails to enable peh msi bit!\n"); + return ret; + } + + ret = qm_set_pf_mse(qm, true); + if (ret) { + pci_err(pdev, "Fails to enable pf mse bit!\n"); + return ret; + } + + if (qm->vfs_num) { + ret = qm_set_vf_mse(qm, true); + if (ret) { + pci_err(pdev, "Fails to enable vf mse bit!\n"); + return ret; + } + } + + ret = qm->err_ini.set_usr_domain_cache(qm); + if (ret) + return ret; + + hisi_qm_restart_prepare(qm); + + ret = hisi_qm_restart(qm); + if (ret) { + pci_err(pdev, "Failed to start QM!\n"); + return ret; + } + + if (qm->vfs_num) { + ret = qm_vf_q_assign(qm, qm->vfs_num); + if (ret) { + pci_err(pdev, "Failed to assign queue!\n"); + return ret; + } + } + + ret = qm_vf_reset_done(pdev, qm->qm_list); + if (ret) { + pci_err(pdev, "Failed to start VFs!\n"); + return -EPERM; + } + + hisi_qm_dev_err_init(qm); + + hisi_qm_restart_done(qm); + + return 0; +} + +int hisi_qm_controller_reset(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + int ret; + + pci_info(pdev, "Controller resetting...\n"); + + ret = qm_controller_reset_prepare(qm); + if (ret) + return ret; + + ret = qm_soft_reset(qm); + if (ret) { + pci_err(pdev, "Controller reset failed (%d)\n", ret); + return ret; + } + + ret = qm_controller_reset_done(qm); + if (ret) + return ret; + + clear_bit(QM_DEV_RESET_STATUS, &qm->hw_status); + pci_info(pdev, "Controller reset complete\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(hisi_qm_controller_reset); + +pci_ers_result_t hisi_qm_dev_slot_reset(struct pci_dev *pdev) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + int ret; + + if (pdev->is_virtfn) + return PCI_ERS_RESULT_RECOVERED; + + pci_info(pdev, "Requesting reset due to PCI error\n"); + pci_cleanup_aer_uncorrect_error_status(pdev); + + /* reset pcie device controller */ + ret = hisi_qm_controller_reset(qm); + if (ret) { + pci_err(pdev, "controller reset failed (%d)\n", ret); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_RECOVERED; +} +EXPORT_SYMBOL_GPL(hisi_qm_dev_slot_reset); + +/* check the interrupt is ecc-mbit error or not */ +static int qm_check_dev_error(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + struct hisi_qm *pf_qm = pci_get_drvdata(pci_physfn(pdev)); + int ret; + + if (pf_qm->fun_type == QM_HW_VF) + return 0; + + ret = qm_get_hw_error_status(pf_qm); + if (ret) + return ret; + + return qm_get_dev_err_status(pf_qm); +} + +void hisi_qm_reset_prepare(struct pci_dev *pdev) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + u32 delay = 0; + int ret; + + hisi_qm_dev_err_uninit(qm); + + while (qm_check_dev_error(qm)) { + msleep(++delay); + if (delay > QM_RESET_WAIT_TIMEOUT) + return; + } + + ret = qm_reset_prepare_ready(qm); + if (ret) { + pci_err(pdev, "FLR not ready!\n"); + return; + } + + if (qm->vfs_num) { + ret = qm_vf_reset_prepare(pdev, qm->qm_list, QM_FLR); + if (ret) { + pci_err(pdev, "Fails to prepare reset!\n"); + return; + } + } + + ret = hisi_qm_stop(qm, QM_FLR); + if (ret) { + pci_err(pdev, "Fails to stop QM!\n"); + return; + } + + pci_info(pdev, "FLR resetting...\n"); +} +EXPORT_SYMBOL_GPL(hisi_qm_reset_prepare); + +static bool qm_flr_reset_complete(struct pci_dev *pdev) +{ + struct pci_dev *pf_pdev = pci_physfn(pdev); + struct hisi_qm *qm = pci_get_drvdata(pf_pdev); + u32 id; + + pci_read_config_dword(qm->pdev, PCI_COMMAND, &id); + if (id == QM_PCI_COMMAND_INVALID) { + pci_err(pdev, "Device can not be used!\n"); + return false; + } + + clear_bit(QM_DEV_RESET_STATUS, &qm->hw_status); + return true; +} + +void hisi_qm_reset_done(struct pci_dev *pdev) +{ + struct hisi_qm *qm = pci_get_drvdata(pdev); + int ret; + + hisi_qm_dev_err_init(qm); + + ret = hisi_qm_restart(qm); + if (ret) { + pci_err(pdev, "Failed to start QM!\n"); + goto flr_done; + } + + if (qm->fun_type == QM_HW_PF) { + ret = qm->err_ini.set_usr_domain_cache(qm); + if (ret) { + pci_err(pdev, "Failed to start QM!\n"); + goto flr_done; + } + + if (qm->vfs_num) + qm_vf_q_assign(qm, qm->vfs_num); + + ret = qm_vf_reset_done(pdev, qm->qm_list); + if (ret) { + pci_err(pdev, "Failed to start VFs!\n"); + goto flr_done; + } + } - writel(AM_CFG_PORT_WR_EN_VALUE, qm->io_base + AM_CFG_PORT_WR_EN); - qm->err_ini.is_qm_ecc_mbit = 0; - qm->err_ini.is_dev_ecc_mbit = 0; +flr_done: + if (qm_flr_reset_complete(pdev)) + pci_info(pdev, "FLR reset complete\n"); } -EXPORT_SYMBOL_GPL(hisi_qm_restart_done); +EXPORT_SYMBOL_GPL(hisi_qm_reset_done); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Zhou Wang <wangzhou1(a)hisilicon.com>"); diff --git a/drivers/crypto/hisilicon/qm.h b/drivers/crypto/hisilicon/qm.h index 24b3609..36e888f 100644 --- a/drivers/crypto/hisilicon/qm.h +++ b/drivers/crypto/hisilicon/qm.h @@ -17,6 +17,9 @@ #include "qm_usr_if.h" +#define QNUM_V1 4096 +#define QNUM_V2 1024 +#define QM_MAX_VFS_NUM 63 /* qm user domain */ #define QM_ARUSER_M_CFG_1 0x100088 #define AXUSER_SNOOP_ENABLE BIT(30) @@ -49,6 +52,7 @@ #define QM_AXI_M_CFG 0x1000ac #define AXI_M_CFG 0xffff #define QM_AXI_M_CFG_ENABLE 0x1000b0 +#define AM_CFG_SINGLE_PORT_MAX_TRANS 0x300014 #define AXI_M_CFG_ENABLE 0xffffffff #define QM_PEH_AXUSER_CFG 0x1000cc #define QM_PEH_AXUSER_CFG_ENABLE 0x1000d0 @@ -235,19 +239,41 @@ struct hisi_qm_status { int stop_reason; }; +struct hisi_qm_hw_error { + u32 int_msk; + const char *msg; +}; + struct hisi_qm; -struct hisi_qm_err_ini { - u32 qm_wr_port; +struct hisi_qm_err_info { + char *acpi_rst; + u32 msi_wr_port; + u32 ecc_2bits_mask; u32 is_qm_ecc_mbit; u32 is_dev_ecc_mbit; - u32 ecc_2bits_mask; - void (*open_axi_master_ooo)(struct hisi_qm *qm); + u32 ce; + u32 nfe; + u32 fe; + u32 msi; +}; + +struct hisi_qm_err_ini { u32 (*get_dev_hw_err_status)(struct hisi_qm *qm); void (*clear_dev_hw_err_status)(struct hisi_qm *qm, u32 err_sts); + void (*hw_err_enable)(struct hisi_qm *qm); + void (*hw_err_disable)(struct hisi_qm *qm); + int (*set_usr_domain_cache)(struct hisi_qm *qm); void (*log_dev_hw_err)(struct hisi_qm *qm, u32 err_sts); - /* design for module can not hold on ooo through qm, such as zip */ - void (*inject_dev_hw_err)(struct hisi_qm *qm); + void (*open_axi_master_ooo)(struct hisi_qm *qm); + void (*close_axi_master_ooo)(struct hisi_qm *qm); + struct hisi_qm_err_info err_info; +}; + +struct hisi_qm_list { + struct mutex lock; + struct list_head list; + bool (*check)(struct hisi_qm *qm); }; struct hisi_qm { @@ -260,7 +286,9 @@ struct hisi_qm { u32 qp_base; u32 qp_num; u32 ctrl_q_num; - + u32 vfs_num; + struct list_head list; + struct hisi_qm_list *qm_list; struct qm_dma qdma; struct qm_sqc *sqc; struct qm_cqc *cqc; @@ -285,8 +313,7 @@ struct hisi_qm { u32 error_mask; u32 msi_mask; - - const char *algs; + unsigned long hw_status; bool use_uacce; /* register to uacce */ bool use_sva; @@ -294,7 +321,9 @@ struct hisi_qm { resource_size_t phys_base; resource_size_t size; struct uacce uacce; + const char *algs; void *reserve; + int uacce_mode; dma_addr_t reserve_dma; #endif struct workqueue_struct *wq; @@ -345,9 +374,144 @@ struct hisi_qp { #endif }; +static inline int q_num_set(const char *val, const struct kernel_param *kp, + unsigned int device) +{ + struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, + device, NULL); + u32 n, q_num; + u8 rev_id; + int ret; + + if (!val) + return -EINVAL; + + if (!pdev) { + q_num = min_t(u32, QNUM_V1, QNUM_V2); + pr_info("No device found currently, suppose queue number is %d\n", + q_num); + } else { + rev_id = pdev->revision; + switch (rev_id) { + case QM_HW_V1: + q_num = QNUM_V1; + break; + case QM_HW_V2: + q_num = QNUM_V2; + break; + default: + return -EINVAL; + } + } + + ret = kstrtou32(val, 10, &n); + if (ret || !n || n > q_num) + return -EINVAL; + + return param_set_int(val, kp); +} + +static inline int vf_num_set(const char *val, const struct kernel_param *kp) +{ + u32 n; + int ret; + + if (!val) + return -EINVAL; + + ret = kstrtou32(val, 10, &n); + if (ret < 0) + return ret; + + if (n > QM_MAX_VFS_NUM) + return -ERANGE; + + return param_set_int(val, kp); +} + +#ifdef CONFIG_CRYPTO_QM_UACCE +static inline int mode_set(const char *val, const struct kernel_param *kp) +{ + u32 n; + int ret; + + if (!val) + return -EINVAL; + + ret = kstrtou32(val, 10, &n); + if (ret != 0 || (n != UACCE_MODE_NOIOMMU && + n != UACCE_MODE_NOUACCE)) + return -EINVAL; + + return param_set_int(val, kp); +} +#endif + +static inline void hisi_qm_add_to_list(struct hisi_qm *qm, + struct hisi_qm_list *qm_list) +{ + mutex_lock(&qm_list->lock); + list_add_tail(&qm->list, &qm_list->list); + mutex_unlock(&qm_list->lock); +} + +static inline void hisi_qm_del_from_list(struct hisi_qm *qm, + struct hisi_qm_list *qm_list) +{ + mutex_lock(&qm_list->lock); + list_del(&qm->list); + mutex_unlock(&qm_list->lock); +} + +static inline int hisi_qm_pre_init(struct hisi_qm *qm, + u32 pf_q_num, u32 def_q_num) +{ + struct pci_dev *pdev = qm->pdev; + + switch (pdev->revision) { + case QM_HW_V1: + case QM_HW_V2: + qm->ver = pdev->revision; + break; + default: + pci_err(pdev, "hardware version err!\n"); + return -ENODEV; + } + + pci_set_drvdata(pdev, qm); + +#ifdef CONFIG_CRYPTO_QM_UACCE + switch (qm->uacce_mode) { + case UACCE_MODE_NOUACCE: + qm->use_uacce = false; + break; + case UACCE_MODE_NOIOMMU: + qm->use_uacce = true; + break; + default: + pci_err(pdev, "uacce mode error!\n"); + return -EINVAL; + } +#else + qm->use_uacce = false; +#endif + if (qm->fun_type == QM_HW_PF) { + qm->qp_base = def_q_num; + qm->qp_num = pf_q_num; + qm->debug.curr_qm_qp_num = pf_q_num; + } + + return 0; +} + +void hisi_qm_free_qps(struct hisi_qp **qps, int qp_num); +int hisi_qm_alloc_qps_node(int node, struct hisi_qm_list *qm_list, + struct hisi_qp **qps, int qp_num, u8 alg_type); int hisi_qm_init(struct hisi_qm *qm); void hisi_qm_uninit(struct hisi_qm *qm); -int hisi_qm_frozen(struct hisi_qm *qm); +void hisi_qm_dev_shutdown(struct pci_dev *pdev); +void hisi_qm_remove_wait_delay(struct hisi_qm *qm, + struct hisi_qm_list *qm_list); int hisi_qm_start(struct hisi_qm *qm); int hisi_qm_stop(struct hisi_qm *qm, enum qm_stop_reason r); struct hisi_qp *hisi_qm_create_qp(struct hisi_qm *qm, u8 alg_type); @@ -358,25 +522,20 @@ struct hisi_qp { int hisi_qp_wait(struct hisi_qp *qp); int hisi_qm_get_free_qp_num(struct hisi_qm *qm); int hisi_qm_get_vft(struct hisi_qm *qm, u32 *base, u32 *number); -int hisi_qm_set_vft(struct hisi_qm *qm, u32 fun_num, u32 base, u32 number); void hisi_qm_debug_regs_clear(struct hisi_qm *qm); int hisi_qm_debug_init(struct hisi_qm *qm); -void hisi_qm_hw_error_init(struct hisi_qm *qm, u32 ce, u32 nfe, u32 fe, - u32 msi); -void hisi_qm_hw_error_uninit(struct hisi_qm *qm); -pci_ers_result_t hisi_qm_hw_error_handle(struct hisi_qm *qm); -void hisi_qm_clear_queues(struct hisi_qm *qm); -enum qm_hw_ver hisi_qm_get_hw_version(struct pci_dev *pdev); int hisi_qm_restart(struct hisi_qm *qm); -int hisi_qm_get_hw_error_status(struct hisi_qm *qm); +int hisi_qm_sriov_enable(struct pci_dev *pdev, int max_vfs); +int hisi_qm_sriov_disable(struct pci_dev *pdev, struct hisi_qm_list *qm_list); +void hisi_qm_dev_err_init(struct hisi_qm *qm); +void hisi_qm_dev_err_uninit(struct hisi_qm *qm); +pci_ers_result_t hisi_qm_dev_err_detected(struct pci_dev *pdev, + pci_channel_state_t state); +pci_ers_result_t hisi_qm_dev_slot_reset(struct pci_dev *pdev); +void hisi_qm_reset_prepare(struct pci_dev *pdev); +void hisi_qm_reset_done(struct pci_dev *pdev); pci_ers_result_t hisi_qm_process_dev_error(struct pci_dev *pdev); -int hisi_qm_reg_test(struct hisi_qm *qm); -int hisi_qm_set_pf_mse(struct hisi_qm *qm, bool set); -int hisi_qm_set_vf_mse(struct hisi_qm *qm, bool set); -int hisi_qm_set_msi(struct hisi_qm *qm, bool set); -void hisi_qm_set_ecc(struct hisi_qm *qm); -void hisi_qm_restart_prepare(struct hisi_qm *qm); -void hisi_qm_restart_done(struct hisi_qm *qm); +int hisi_qm_controller_reset(struct hisi_qm *qm); struct hisi_acc_sgl_pool; struct hisi_acc_hw_sgl *hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev, diff --git a/drivers/crypto/hisilicon/rde/rde.h b/drivers/crypto/hisilicon/rde/rde.h index aa7887a..e06efc7 100644 --- a/drivers/crypto/hisilicon/rde/rde.h +++ b/drivers/crypto/hisilicon/rde/rde.h @@ -22,19 +22,11 @@ struct hisi_rde_ctrl; -enum hisi_rde_status { - HISI_RDE_RESET, -}; - struct hisi_rde { struct hisi_qm qm; - struct list_head list; struct hisi_rde_ctrl *ctrl; struct work_struct reset_work; - struct mutex *rde_list_lock; - unsigned long status; u32 smmu_state; - int q_ref; }; #define RDE_CM_LOAD_ENABLE 1 @@ -134,7 +126,6 @@ struct hisi_rde_msg { struct hisi_rde_ctx { struct device *dev; struct hisi_qp *qp; - struct hisi_rde *rde_dev; struct hisi_rde_msg *req_list; unsigned long *req_bitmap; spinlock_t req_lock; @@ -323,7 +314,7 @@ static inline void rde_table_dump(const struct hisi_rde_msg *req) } } -struct hisi_rde *find_rde_device(int node); +struct hisi_qp *rde_create_qp(void); int hisi_rde_abnormal_fix(struct hisi_qm *qm); #endif diff --git a/drivers/crypto/hisilicon/rde/rde_api.c b/drivers/crypto/hisilicon/rde/rde_api.c index 1be468a..f1330f1 100644 --- a/drivers/crypto/hisilicon/rde/rde_api.c +++ b/drivers/crypto/hisilicon/rde/rde_api.c @@ -835,17 +835,12 @@ int hisi_rde_io_proc(struct acc_ctx *ctx, struct raid_ec_ctrl *ctrl, return ret; } -static int hisi_rde_create_qp(struct hisi_qm *qm, struct acc_ctx *ctx, - int alg_type, int req_type) +static int hisi_rde_start_qp(struct hisi_qp *qp, struct acc_ctx *ctx, + int req_type) { - struct hisi_qp *qp; struct hisi_rde_ctx *rde_ctx; int ret; - qp = hisi_qm_create_qp(qm, alg_type); - if (IS_ERR(qp)) - return PTR_ERR(qp); - qp->req_type = req_type; qp->qp_ctx = ctx; @@ -994,9 +989,10 @@ static int hisi_rde_ctx_init(struct hisi_rde_ctx *rde_ctx, int qlen) int acc_init(struct acc_ctx *ctx) { + struct hisi_rde_ctx *rde_ctx; struct hisi_rde *hisi_rde; + struct hisi_qp *qp; struct hisi_qm *qm; - struct hisi_rde_ctx *rde_ctx; int ret; if (unlikely(!ctx)) { @@ -1004,9 +1000,9 @@ int acc_init(struct acc_ctx *ctx) return -EINVAL; } - hisi_rde = find_rde_device(cpu_to_node(smp_processor_id())); - if (unlikely(!hisi_rde)) { - pr_err("[%s]Can not find proper RDE device.\n", __func__); + qp = rde_create_qp(); + if (unlikely(!qp)) { + pr_err("[%s]Can not create RDE qp.\n", __func__); return -ENODEV; } /* alloc inner private struct */ @@ -1017,20 +1013,20 @@ int acc_init(struct acc_ctx *ctx) } ctx->inner = (void *)rde_ctx; - qm = &hisi_rde->qm; + qm = qp->qm; if (unlikely(!qm->pdev)) { pr_err("[%s] Pdev is NULL.\n", __func__); return -ENODEV; } rde_ctx->dev = &qm->pdev->dev; - ret = hisi_rde_create_qp(qm, ctx, 0, 0); + ret = hisi_rde_start_qp(qp, ctx, 0); if (ret) { - dev_err(rde_ctx->dev, "[%s] Create qp failed.\n", __func__); + dev_err(rde_ctx->dev, "[%s] start qp failed.\n", __func__); goto qp_err; } - rde_ctx->rde_dev = hisi_rde; + hisi_rde = container_of(qm, struct hisi_rde, qm); rde_ctx->smmu_state = hisi_rde->smmu_state; rde_ctx->addr_type = ctx->addr_type; hisi_rde_session_init(rde_ctx); @@ -1081,9 +1077,6 @@ int acc_clear(struct acc_ctx *ctx) rde_ctx->req_list = NULL; hisi_rde_release_qp(rde_ctx); - mutex_lock(rde_ctx->rde_dev->rde_list_lock); - rde_ctx->rde_dev->q_ref = rde_ctx->rde_dev->q_ref - 1; - mutex_unlock(rde_ctx->rde_dev->rde_list_lock); kfree(rde_ctx); ctx->inner = NULL; diff --git a/drivers/crypto/hisilicon/rde/rde_api.h b/drivers/crypto/hisilicon/rde/rde_api.h index 0f9021b..167607e 100644 --- a/drivers/crypto/hisilicon/rde/rde_api.h +++ b/drivers/crypto/hisilicon/rde/rde_api.h @@ -308,7 +308,7 @@ struct acc_dif { * @input_block: number of sector * @data_len: data len of per disk, block_size (with dif)* input_block * @buf_type: denoted by ACC_BUF_TYPE_E - * @src_dif��dif information of source disks + * @src_dif: dif information of source disks * @dst_dif: dif information of dest disks * @cm_load: coe_matrix reload control, 0: do not load, 1: load * @cm_len: length of loaded coe_matrix, equal to src_num diff --git a/drivers/crypto/hisilicon/rde/rde_main.c b/drivers/crypto/hisilicon/rde/rde_main.c index 453657a..318d4a0 100644 --- a/drivers/crypto/hisilicon/rde/rde_main.c +++ b/drivers/crypto/hisilicon/rde/rde_main.c @@ -22,7 +22,6 @@ #include <linux/uacce.h> #include "rde.h" -#define HRDE_VF_NUM 63 #define HRDE_QUEUE_NUM_V1 4096 #define HRDE_QUEUE_NUM_V2 1024 #define HRDE_PCI_DEVICE_ID 0xa25a @@ -32,7 +31,6 @@ #define HRDE_PF_DEF_Q_BASE 0 #define HRDE_RD_INTVRL_US 10 #define HRDE_RD_TMOUT_US 1000 -#define FORMAT_DECIMAL 10 #define HRDE_RST_TMOUT_MS 400 #define HRDE_ENABLE 1 #define HRDE_DISABLE 0 @@ -68,7 +66,7 @@ #define CHN_CFG 0x5010101 #define HRDE_AXI_SHUTDOWN_EN BIT(26) #define HRDE_AXI_SHUTDOWN_DIS 0xFBFFFFFF -#define HRDE_WR_MSI_PORT 0xFFFE +#define HRDE_WR_MSI_PORT BIT(0) #define HRDE_AWUSER_BD_1 0x310104 #define HRDE_ARUSER_BD_1 0x310114 #define HRDE_ARUSER_SGL_1 0x310124 @@ -87,9 +85,6 @@ #define HRDE_QM_IDEL_STATUS 0x1040e4 #define HRDE_QM_PEH_DFX_INFO0 0x1000fc #define PEH_MSI_MASK_SHIFT 0x90 -#define HRDE_MASTER_GLOBAL_CTRL 0x300000 -#define MASTER_GLOBAL_CTRL_SHUTDOWN 0x1 -#define MASTER_TRANS_RETURN_RW 0x3 #define CACHE_CTL 0x1833 #define HRDE_DBGFS_VAL_MAX_LEN 20 #define HRDE_PROBE_ADDR 0x31025c @@ -100,16 +95,9 @@ static const char hisi_rde_name[] = "hisi_rde"; static struct dentry *hrde_debugfs_root; -LIST_HEAD(hisi_rde_list); -DEFINE_MUTEX(hisi_rde_list_lock); +static struct hisi_qm_list rde_devices; static void hisi_rde_ras_proc(struct work_struct *work); -struct hisi_rde_resource { - struct hisi_rde *hrde; - int distance; - struct list_head list; -}; - static const struct hisi_rde_hw_error rde_hw_error[] = { {.int_msk = BIT(0), .msg = "Rde_ecc_1bitt_err"}, {.int_msk = BIT(1), .msg = "Rde_ecc_2bit_err"}, @@ -157,7 +145,6 @@ struct ctrl_debug_file { */ struct hisi_rde_ctrl { struct hisi_rde *hisi_rde; - struct dentry *debug_root; struct ctrl_debug_file files[HRDE_DEBUG_FILE_NUM]; }; @@ -199,78 +186,36 @@ struct hisi_rde_ctrl { {"HRDE_AM_CURR_WR_TXID_STS_2", 0x300178ull}, }; -static int pf_q_num_set(const char *val, const struct kernel_param *kp) +#ifdef CONFIG_CRYPTO_QM_UACCE +static int uacce_mode_set(const char *val, const struct kernel_param *kp) { - struct pci_dev *pdev; - u32 n; - u32 q_num; - u8 rev_id; - int ret; - - if (!val) - return -EINVAL; - - pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, HRDE_PCI_DEVICE_ID, NULL); - if (unlikely(!pdev)) { - q_num = min_t(u32, HRDE_QUEUE_NUM_V1, HRDE_QUEUE_NUM_V2); - pr_info - ("No device found currently, suppose queue number is %d.\n", - q_num); - } else { - rev_id = pdev->revision; - switch (rev_id) { - case QM_HW_V1: - q_num = HRDE_QUEUE_NUM_V1; - break; - case QM_HW_V2: - q_num = HRDE_QUEUE_NUM_V2; - break; - default: - return -EINVAL; - } - } - - ret = kstrtou32(val, 10, &n); - if (ret != 0 || n > q_num) - return -EINVAL; - - return param_set_int(val, kp); + return mode_set(val, kp); } -static const struct kernel_param_ops pf_q_num_ops = { - .set = pf_q_num_set, +static const struct kernel_param_ops uacce_mode_ops = { + .set = uacce_mode_set, .get = param_get_int, }; -static int uacce_mode_set(const char *val, const struct kernel_param *kp) -{ - u32 n; - int ret; - - if (!val) - return -EINVAL; - - ret = kstrtou32(val, FORMAT_DECIMAL, &n); - if (ret != 0 || (n != UACCE_MODE_NOIOMMU && n != UACCE_MODE_NOUACCE)) - return -EINVAL; +static int uacce_mode = UACCE_MODE_NOUACCE; +module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); +MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); +#endif - return param_set_int(val, kp); +static int pf_q_num_set(const char *val, const struct kernel_param *kp) +{ + return q_num_set(val, kp, HRDE_PCI_DEVICE_ID); } -static const struct kernel_param_ops uacce_mode_ops = { - .set = uacce_mode_set, +static const struct kernel_param_ops pf_q_num_ops = { + .set = pf_q_num_set, .get = param_get_int, }; - static u32 pf_q_num = HRDE_PF_DEF_Q_NUM; module_param_cb(pf_q_num, &pf_q_num_ops, &pf_q_num, 0444); MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 0-4096, v2 0-1024)"); -static int uacce_mode = UACCE_MODE_NOUACCE; -module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); -MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); - static const struct pci_device_id hisi_rde_dev_ids[] = { {PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, HRDE_PCI_DEVICE_ID)}, {0,} @@ -278,125 +223,59 @@ static int uacce_mode_set(const char *val, const struct kernel_param *kp) MODULE_DEVICE_TABLE(pci, hisi_rde_dev_ids); -static void free_list(struct list_head *head) -{ - struct hisi_rde_resource *res; - struct hisi_rde_resource *tmp; - - list_for_each_entry_safe(res, tmp, head, list) { - list_del(&res->list); - kfree(res); - } -} - -struct hisi_rde *find_rde_device(int node) +struct hisi_qp *rde_create_qp(void) { - struct hisi_rde *ret = NULL; -#ifdef CONFIG_NUMA - struct hisi_rde_resource *res, *tmp; - struct hisi_rde *hisi_rde; - struct list_head *n; - struct device *dev; - LIST_HEAD(head); - - mutex_lock(&hisi_rde_list_lock); - - list_for_each_entry(hisi_rde, &hisi_rde_list, list) { - res = kzalloc(sizeof(*res), GFP_KERNEL); - if (!res) - goto err; - - dev = &hisi_rde->qm.pdev->dev; - res->hrde = hisi_rde; - res->distance = node_distance(dev->numa_node, node); - n = &head; - list_for_each_entry(tmp, &head, list) { - if (res->distance < tmp->distance) { - n = &tmp->list; - break; - } - } - list_add_tail(&res->list, n); - } - - list_for_each_entry(tmp, &head, list) { - if (tmp->hrde->q_ref + 1 <= pf_q_num) { - tmp->hrde->q_ref = tmp->hrde->q_ref + 1; - ret = tmp->hrde; - break; - } - } + int node = cpu_to_node(smp_processor_id()); + struct hisi_qp *qp; + int ret; - free_list(&head); -#else - mutex_lock(&hisi_rde_list_lock); - ret = list_first_entry(&hisi_rde_list, struct hisi_rde, list); -#endif - mutex_unlock(&hisi_rde_list_lock); - return ret; + ret = hisi_qm_alloc_qps_node(node, &rde_devices, &qp, 1, 0); + if (!ret) + return qp; -err: - free_list(&head); - mutex_unlock(&hisi_rde_list_lock); return NULL; } -static inline void hisi_rde_add_to_list(struct hisi_rde *hisi_rde) -{ - mutex_lock(&hisi_rde_list_lock); - list_add_tail(&hisi_rde->list, &hisi_rde_list); - mutex_unlock(&hisi_rde_list_lock); -} - -static inline void hisi_rde_remove_from_list(struct hisi_rde *hisi_rde) -{ - mutex_lock(&hisi_rde_list_lock); - list_del(&hisi_rde->list); - mutex_unlock(&hisi_rde_list_lock); -} - -static void hisi_rde_engine_init(struct hisi_rde *hisi_rde) +static int hisi_rde_engine_init(struct hisi_qm *qm) { - writel(DFX_CTRL0, hisi_rde->qm.io_base + HRDE_DFX_CTRL_0); + writel(DFX_CTRL0, qm->io_base + HRDE_DFX_CTRL_0); /* usr domain */ - writel(HRDE_USER_SMMU, hisi_rde->qm.io_base + HRDE_AWUSER_BD_1); - writel(HRDE_USER_SMMU, hisi_rde->qm.io_base + HRDE_ARUSER_BD_1); - writel(HRDE_USER_SMMU, hisi_rde->qm.io_base + HRDE_AWUSER_DAT_1); - writel(HRDE_USER_SMMU, hisi_rde->qm.io_base + HRDE_ARUSER_DAT_1); - writel(HRDE_USER_SMMU, hisi_rde->qm.io_base + HRDE_ARUSER_SGL_1); + writel(HRDE_USER_SMMU, qm->io_base + HRDE_AWUSER_BD_1); + writel(HRDE_USER_SMMU, qm->io_base + HRDE_ARUSER_BD_1); + writel(HRDE_USER_SMMU, qm->io_base + HRDE_AWUSER_DAT_1); + writel(HRDE_USER_SMMU, qm->io_base + HRDE_ARUSER_DAT_1); + writel(HRDE_USER_SMMU, qm->io_base + HRDE_ARUSER_SGL_1); /* rde cache */ - writel(AWCACHE, hisi_rde->qm.io_base + HRDE_AWCACHE); - writel(ARCACHE, hisi_rde->qm.io_base + HRDE_ARCACHE); + writel(AWCACHE, qm->io_base + HRDE_AWCACHE); + writel(ARCACHE, qm->io_base + HRDE_ARCACHE); /* rde chn enable + outstangding config */ - writel(CHN_CFG, hisi_rde->qm.io_base + HRDE_CFG); + writel(CHN_CFG, qm->io_base + HRDE_CFG); + + return 0; } -static void hisi_rde_set_user_domain_and_cache(struct hisi_rde *hisi_rde) +static int hisi_rde_set_user_domain_and_cache(struct hisi_qm *qm) { /* qm user domain */ - writel(AXUSER_BASE, hisi_rde->qm.io_base + QM_ARUSER_M_CFG_1); - writel(ARUSER_M_CFG_ENABLE, hisi_rde->qm.io_base + - QM_ARUSER_M_CFG_ENABLE); - writel(AXUSER_BASE, hisi_rde->qm.io_base + QM_AWUSER_M_CFG_1); - writel(AWUSER_M_CFG_ENABLE, hisi_rde->qm.io_base + - QM_AWUSER_M_CFG_ENABLE); - writel(WUSER_M_CFG_ENABLE, hisi_rde->qm.io_base + - QM_WUSER_M_CFG_ENABLE); + writel(AXUSER_BASE, qm->io_base + QM_ARUSER_M_CFG_1); + writel(ARUSER_M_CFG_ENABLE, qm->io_base + QM_ARUSER_M_CFG_ENABLE); + writel(AXUSER_BASE, qm->io_base + QM_AWUSER_M_CFG_1); + writel(AWUSER_M_CFG_ENABLE, qm->io_base + QM_AWUSER_M_CFG_ENABLE); + writel(WUSER_M_CFG_ENABLE, qm->io_base + QM_WUSER_M_CFG_ENABLE); /* qm cache */ - writel(AXI_M_CFG, hisi_rde->qm.io_base + QM_AXI_M_CFG); - writel(AXI_M_CFG_ENABLE, hisi_rde->qm.io_base + QM_AXI_M_CFG_ENABLE); + writel(AXI_M_CFG, qm->io_base + QM_AXI_M_CFG); + writel(AXI_M_CFG_ENABLE, qm->io_base + QM_AXI_M_CFG_ENABLE); /* disable BME/PM/SRIOV FLR*/ - writel(PEH_AXUSER_CFG, hisi_rde->qm.io_base + QM_PEH_AXUSER_CFG); - writel(PEH_AXUSER_CFG_ENABLE, hisi_rde->qm.io_base + - QM_PEH_AXUSER_CFG_ENABLE); + writel(PEH_AXUSER_CFG, qm->io_base + QM_PEH_AXUSER_CFG); + writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + QM_PEH_AXUSER_CFG_ENABLE); - writel(CACHE_CTL, hisi_rde->qm.io_base + QM_CACHE_CTL); + writel(CACHE_CTL, qm->io_base + QM_CACHE_CTL); - hisi_rde_engine_init(hisi_rde); + return hisi_rde_engine_init(qm); } static void hisi_rde_debug_regs_clear(struct hisi_qm *qm) @@ -418,30 +297,38 @@ static void hisi_rde_debug_regs_clear(struct hisi_qm *qm) hisi_qm_debug_regs_clear(qm); } -static void hisi_rde_hw_error_set_state(struct hisi_rde *hisi_rde, bool state) +static void hisi_rde_hw_error_enable(struct hisi_qm *qm) { - u32 ras_msk = (HRDE_RAS_CE_MSK | HRDE_RAS_NFE_MSK); u32 val; - val = readl(hisi_rde->qm.io_base + HRDE_CFG); - if (state) { - writel(HRDE_INT_SOURCE_CLEAR, - hisi_rde->qm.io_base + HRDE_INT_SOURCE); - writel(HRDE_RAS_ENABLE, - hisi_rde->qm.io_base + HRDE_RAS_INT_MSK); - /* bd prefetch should bd masked to prevent misreport */ - writel((HRDE_INT_ENABLE | HRDE_BD_PREFETCH), - hisi_rde->qm.io_base + HRDE_INT_MSK); - /* make master ooo close, when m-bits error happens*/ - val = val | HRDE_AXI_SHUTDOWN_EN; - } else { - writel(ras_msk, hisi_rde->qm.io_base + HRDE_RAS_INT_MSK); - writel(HRDE_INT_DISABLE, hisi_rde->qm.io_base + HRDE_INT_MSK); - /* make master ooo open, when m-bits error happens*/ - val = val & HRDE_AXI_SHUTDOWN_DIS; - } + val = readl(qm->io_base + HRDE_CFG); + + /* clear RDE hw error source if having */ + writel(HRDE_INT_SOURCE_CLEAR, qm->io_base + HRDE_INT_SOURCE); + writel(HRDE_RAS_ENABLE, qm->io_base + HRDE_RAS_INT_MSK); + + /* bd prefetch should bd masked to prevent misreport */ + writel((HRDE_INT_ENABLE | HRDE_BD_PREFETCH), + qm->io_base + HRDE_INT_MSK); - writel(val, hisi_rde->qm.io_base + HRDE_CFG); + /* when m-bit error occur, master ooo will close */ + val = val | HRDE_AXI_SHUTDOWN_EN; + writel(val, qm->io_base + HRDE_CFG); +} + +static void hisi_rde_hw_error_disable(struct hisi_qm *qm) +{ + u32 ras_msk = HRDE_RAS_CE_MSK | HRDE_RAS_NFE_MSK; + u32 val; + + val = readl(qm->io_base + HRDE_CFG); + + writel(ras_msk, qm->io_base + HRDE_RAS_INT_MSK); + writel(HRDE_INT_DISABLE, qm->io_base + HRDE_INT_MSK); + + /* when m-bit error occur, master ooo will not close */ + val = val & HRDE_AXI_SHUTDOWN_DIS; + writel(val, qm->io_base + HRDE_CFG); } static inline struct hisi_qm *file_to_qm(struct ctrl_debug_file *file) @@ -587,10 +474,8 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, .write = ctrl_debug_write, }; -static int hisi_rde_chn_debug_init(struct hisi_rde_ctrl *ctrl) +static int hisi_rde_chn_debug_init(struct hisi_qm *qm) { - struct hisi_rde *hisi_rde = ctrl->hisi_rde; - struct hisi_qm *qm = &hisi_rde->qm; struct device *dev = &qm->pdev->dev; struct debugfs_regset32 *regset, *regset_ooo; struct dentry *tmp_d, *tmp; @@ -601,7 +486,7 @@ static int hisi_rde_chn_debug_init(struct hisi_rde_ctrl *ctrl) if (ret < 0) return -ENOENT; - tmp_d = debugfs_create_dir(buf, ctrl->debug_root); + tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); if (!tmp_d) return -ENOENT; @@ -628,29 +513,30 @@ static int hisi_rde_chn_debug_init(struct hisi_rde_ctrl *ctrl) return 0; } -static int hisi_rde_ctrl_debug_init(struct hisi_rde_ctrl *ctrl) +static int hisi_rde_ctrl_debug_init(struct hisi_qm *qm) { + struct hisi_rde *hisi_rde = container_of(qm, struct hisi_rde, qm); struct dentry *tmp; int i; for (i = HRDE_CURRENT_FUNCTION; i < HRDE_DEBUG_FILE_NUM; i++) { - spin_lock_init(&ctrl->files[i].lock); - ctrl->files[i].ctrl = ctrl; - ctrl->files[i].index = i; + spin_lock_init(&hisi_rde->ctrl->files[i].lock); + hisi_rde->ctrl->files[i].ctrl = hisi_rde->ctrl; + hisi_rde->ctrl->files[i].index = i; tmp = debugfs_create_file(ctrl_debug_file_name[i], 0600, - ctrl->debug_root, ctrl->files + i, + qm->debug.debug_root, + hisi_rde->ctrl->files + i, &ctrl_debug_fops); if (!tmp) return -ENOENT; } - return hisi_rde_chn_debug_init(ctrl); + return hisi_rde_chn_debug_init(qm); } -static int hisi_rde_debugfs_init(struct hisi_rde *hisi_rde) +static int hisi_rde_debugfs_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_rde->qm; struct device *dev = &qm->pdev->dev; struct dentry *dev_d; int ret; @@ -665,8 +551,7 @@ static int hisi_rde_debugfs_init(struct hisi_rde *hisi_rde) goto failed_to_create; if (qm->pdev->device == HRDE_PCI_DEVICE_ID) { - hisi_rde->ctrl->debug_root = dev_d; - ret = hisi_rde_ctrl_debug_init(hisi_rde->ctrl); + ret = hisi_rde_ctrl_debug_init(qm); if (ret) goto failed_to_create; } @@ -678,49 +563,17 @@ static int hisi_rde_debugfs_init(struct hisi_rde *hisi_rde) return ret; } -static void hisi_rde_debugfs_exit(struct hisi_rde *hisi_rde) +static void hisi_rde_debugfs_exit(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_rde->qm; - debugfs_remove_recursive(qm->debug.debug_root); + if (qm->fun_type == QM_HW_PF) { hisi_rde_debug_regs_clear(qm); qm->debug.curr_qm_qp_num = 0; } } -static void hisi_rde_set_hw_error(struct hisi_rde *hisi_rde, bool state) -{ - if (state) - hisi_qm_hw_error_init(&hisi_rde->qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT, - 0, 0); - else - hisi_qm_hw_error_uninit(&hisi_rde->qm); - - hisi_rde_hw_error_set_state(hisi_rde, state); -} - -static void hisi_rde_open_master_ooo(struct hisi_qm *qm) -{ - u32 val; - - val = readl(qm->io_base + HRDE_CFG); - writel(val & HRDE_AXI_SHUTDOWN_DIS, qm->io_base + HRDE_CFG); - writel(val | HRDE_AXI_SHUTDOWN_EN, qm->io_base + HRDE_CFG); -} - -static u32 hisi_rde_get_hw_err_status(struct hisi_qm *qm) -{ - return readl(qm->io_base + HRDE_INT_STATUS); -} - -static void hisi_rde_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) -{ - writel(err_sts, qm->io_base + HRDE_INT_SOURCE); -} - -static void hisi_rde_hw_error_log(struct hisi_qm *qm, u32 err_sts) +void hisi_rde_hw_error_log(struct hisi_qm *qm, u32 err_sts) { const struct hisi_rde_hw_error *err = rde_hw_error; struct device *dev = &qm->pdev->dev; @@ -751,10 +604,30 @@ static void hisi_rde_hw_error_log(struct hisi_qm *qm, u32 err_sts) } } -static int hisi_rde_pf_probe_init(struct hisi_rde *hisi_rde) +u32 hisi_rde_get_hw_err_status(struct hisi_qm *qm) +{ + return readl(qm->io_base + HRDE_INT_STATUS); +} + +void hisi_rde_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) { - struct hisi_qm *qm = &hisi_rde->qm; + writel(err_sts, qm->io_base + HRDE_INT_SOURCE); +} + +static void hisi_rde_open_master_ooo(struct hisi_qm *qm) +{ + u32 val; + + val = readl(qm->io_base + HRDE_CFG); + writel(val & HRDE_AXI_SHUTDOWN_DIS, qm->io_base + HRDE_CFG); + writel(val | HRDE_AXI_SHUTDOWN_EN, qm->io_base + HRDE_CFG); +} + +static int hisi_rde_pf_probe_init(struct hisi_qm *qm) +{ + struct hisi_rde *hisi_rde = container_of(qm, struct hisi_rde, qm); struct hisi_rde_ctrl *ctrl; + int ret; ctrl = devm_kzalloc(&qm->pdev->dev, sizeof(*ctrl), GFP_KERNEL); if (!ctrl) @@ -776,14 +649,26 @@ static int hisi_rde_pf_probe_init(struct hisi_rde *hisi_rde) return -EINVAL; } - qm->err_ini.qm_wr_port = HRDE_WR_MSI_PORT; - qm->err_ini.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; - qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; qm->err_ini.get_dev_hw_err_status = hisi_rde_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = hisi_rde_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = 0; + qm->err_ini.err_info.acpi_rst = "RRST"; + qm->err_ini.hw_err_disable = hisi_rde_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_rde_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_rde_set_user_domain_and_cache; qm->err_ini.log_dev_hw_err = hisi_rde_hw_error_log; - hisi_rde_set_user_domain_and_cache(hisi_rde); - hisi_rde_set_hw_error(hisi_rde, true); + qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; + qm->err_ini.err_info.msi_wr_port = HRDE_WR_MSI_PORT; + + ret = qm->err_ini.set_usr_domain_cache(qm); + if (ret) + return ret; + + hisi_qm_dev_err_init(qm); qm->err_ini.open_axi_master_ooo(qm); hisi_rde_debug_regs_clear(qm); @@ -792,33 +677,21 @@ static int hisi_rde_pf_probe_init(struct hisi_rde *hisi_rde) static int hisi_rde_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) { - enum qm_hw_ver rev_id; + int ret; - rev_id = hisi_qm_get_hw_version(pdev); - if (rev_id == QM_HW_UNKNOWN) - return -EINVAL; +#ifdef CONFIG_CRYPTO_QM_UACCE + qm->algs = "ec\n"; + qm->uacce_mode = uacce_mode; +#endif qm->pdev = pdev; - qm->ver = rev_id; + ret = hisi_qm_pre_init(qm, pf_q_num, HRDE_PF_DEF_Q_BASE); + if (ret) + return ret; + + qm->qm_list = &rde_devices; qm->sqe_size = HRDE_SQE_SIZE; qm->dev_name = hisi_rde_name; - qm->fun_type = QM_HW_PF; - qm->algs = "ec\n"; - - switch (uacce_mode) { - case UACCE_MODE_NOUACCE: - qm->use_uacce = false; - break; - case UACCE_MODE_NOIOMMU: - qm->use_uacce = true; - break; - default: - return -EINVAL; - } - - qm->qp_base = HRDE_PF_DEF_Q_BASE; - qm->qp_num = pf_q_num; - qm->debug.curr_qm_qp_num = pf_q_num; qm->abnormal_fix = hisi_rde_abnormal_fix; return 0; @@ -849,11 +722,12 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!hisi_rde) return -ENOMEM; - pci_set_drvdata(pdev, hisi_rde); INIT_WORK(&hisi_rde->reset_work, hisi_rde_ras_proc); hisi_rde->smmu_state = hisi_rde_smmu_state(&pdev->dev); qm = &hisi_rde->qm; + qm->fun_type = QM_HW_PF; + ret = hisi_rde_qm_pre_init(qm, pdev); if (ret) { pci_err(pdev, "Pre init qm failed!\n"); @@ -866,7 +740,7 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) return ret; } - ret = hisi_rde_pf_probe_init(hisi_rde); + ret = hisi_rde_pf_probe_init(qm); if (ret) { pci_err(pdev, "Init pf failed!\n"); goto err_qm_uninit; @@ -878,16 +752,15 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_qm_uninit; } - ret = hisi_rde_debugfs_init(hisi_rde); + ret = hisi_rde_debugfs_init(qm); if (ret) pci_warn(pdev, "Init debugfs failed!\n"); - hisi_rde_add_to_list(hisi_rde); - hisi_rde->rde_list_lock = &hisi_rde_list_lock; + hisi_qm_add_to_list(qm, &rde_devices); return 0; - err_qm_uninit: +err_qm_uninit: hisi_qm_uninit(qm); return ret; @@ -895,198 +768,20 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) static void hisi_rde_remove(struct pci_dev *pdev) { - struct hisi_rde *hisi_rde = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_rde->qm; + struct hisi_qm *qm = pci_get_drvdata(pdev); + struct hisi_rde *hisi_rde = container_of(qm, struct hisi_rde, qm); + + hisi_qm_remove_wait_delay(qm, &rde_devices); qm->abnormal_fix = NULL; - hisi_rde_hw_error_set_state(hisi_rde, false); + hisi_qm_dev_err_uninit(qm); cancel_work_sync(&hisi_rde->reset_work); - hisi_rde_remove_from_list(hisi_rde); - hisi_rde_debugfs_exit(hisi_rde); + hisi_qm_del_from_list(qm, &rde_devices); + hisi_rde_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); hisi_qm_uninit(qm); } -static void hisi_rde_shutdown(struct pci_dev *pdev) -{ - struct hisi_rde *hisi_rde = pci_get_drvdata(pdev); - - hisi_qm_stop(&hisi_rde->qm, QM_NORMAL); -} - -static int hisi_rde_reset_prepare_rdy(struct hisi_rde *hisi_rde) -{ - int delay = 0; - - while (test_and_set_bit(HISI_RDE_RESET, &hisi_rde->status)) { - msleep(++delay); - if (delay > HRDE_RST_TMOUT_MS) - return -EBUSY; - } - - return 0; -} - -static int hisi_rde_controller_reset_prepare(struct hisi_rde *hisi_rde) -{ - struct hisi_qm *qm = &hisi_rde->qm; - struct pci_dev *pdev = qm->pdev; - int ret; - - ret = hisi_rde_reset_prepare_rdy(hisi_rde); - if (ret) { - dev_err(&pdev->dev, "Controller reset not ready!\n"); - return ret; - } - - ret = hisi_qm_stop(qm, QM_SOFT_RESET); - if (ret) { - dev_err(&pdev->dev, "Stop QM failed!\n"); - return ret; - } - -#ifdef CONFIG_CRYPTO_QM_UACCE - if (qm->use_uacce) { - ret = uacce_hw_err_isolate(&qm->uacce); - if (ret) { - dev_err(&pdev->dev, "Isolate hw err failed!\n"); - return ret; - } - } -#endif - - return 0; -} - -static int hisi_rde_soft_reset(struct hisi_rde *hisi_rde) -{ - struct hisi_qm *qm = &hisi_rde->qm; - struct device *dev = &qm->pdev->dev; - unsigned long long value; - int ret; - u32 val; - - /* Check PF stream stop */ - ret = hisi_qm_reg_test(qm); - if (ret) - return ret; - - /* Disable PEH MSI */ - ret = hisi_qm_set_msi(qm, HRDE_DISABLE); - if (ret) { - dev_err(dev, "Disable peh msi bit failed.\n"); - return ret; - } - - /* Set qm ecc if dev ecc happened to hold on ooo */ - hisi_qm_set_ecc(qm); - - /* OOO register set and check */ - writel(MASTER_GLOBAL_CTRL_SHUTDOWN, - hisi_rde->qm.io_base + HRDE_MASTER_GLOBAL_CTRL); - - /* If bus lock, reset chip */ - ret = readl_relaxed_poll_timeout(hisi_rde->qm.io_base + - HRDE_MASTER_TRANS_RET, val, - (val == MASTER_TRANS_RETURN_RW), - HRDE_RD_INTVRL_US, HRDE_RD_TMOUT_US); - if (ret) { - dev_emerg(dev, "Bus lock! Please reset system.\n"); - return ret; - } - - /* Disable PF MSE bit */ - ret = hisi_qm_set_pf_mse(qm, HRDE_DISABLE); - if (ret) { - dev_err(dev, "Disable pf mse bit failed.\n"); - return ret; - } - - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(dev)) { - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(dev), "RRST", - NULL, &value); - if (ACPI_FAILURE(s)) { - dev_err(dev, "No controller reset method.\n"); - return -EIO; - } - - if (value) { - dev_err(dev, "Reset step %llu failed.\n", value); - return -EIO; - } - } else { - dev_err(dev, "No reset method!\n"); - return -EINVAL; - } - - return 0; -} - -static int hisi_rde_controller_reset_done(struct hisi_rde *hisi_rde) -{ - struct hisi_qm *qm = &hisi_rde->qm; - struct pci_dev *pdev = qm->pdev; - int ret; - - /* Enable PEH MSI */ - ret = hisi_qm_set_msi(qm, HRDE_ENABLE); - if (ret) { - dev_err(&pdev->dev, "Enable peh msi bit failed!\n"); - return ret; - } - - /* Enable PF MSE bit */ - ret = hisi_qm_set_pf_mse(qm, HRDE_ENABLE); - if (ret) { - dev_err(&pdev->dev, "Enable pf mse bit failed!\n"); - return ret; - } - - hisi_rde_set_user_domain_and_cache(hisi_rde); - hisi_qm_restart_prepare(qm); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(&pdev->dev, "Start QM failed!\n"); - return -EPERM; - } - - hisi_qm_restart_done(qm); - hisi_rde_set_hw_error(hisi_rde, true); - - return 0; -} - -static int hisi_rde_controller_reset(struct hisi_rde *hisi_rde) -{ - struct device *dev = &hisi_rde->qm.pdev->dev; - int ret; - - dev_info_ratelimited(dev, "Controller resetting...\n"); - - ret = hisi_rde_controller_reset_prepare(hisi_rde); - if (ret) - return ret; - - ret = hisi_rde_soft_reset(hisi_rde); - if (ret) { - dev_err(dev, "Controller reset failed (%d).\n", ret); - return ret; - } - - ret = hisi_rde_controller_reset_done(hisi_rde); - if (ret) - return ret; - - clear_bit(HISI_RDE_RESET, &hisi_rde->status); - dev_info_ratelimited(dev, "Controller reset complete.\n"); - - return 0; -} - static void hisi_rde_ras_proc(struct work_struct *work) { struct pci_dev *pdev; @@ -1100,121 +795,26 @@ static void hisi_rde_ras_proc(struct work_struct *work) ret = hisi_qm_process_dev_error(pdev); if (ret == PCI_ERS_RESULT_NEED_RESET) - if (hisi_rde_controller_reset(hisi_rde)) + if (hisi_qm_controller_reset(&hisi_rde->qm)) dev_err(&pdev->dev, "Hisi_rde reset fail.\n"); } int hisi_rde_abnormal_fix(struct hisi_qm *qm) { - struct pci_dev *pdev; struct hisi_rde *hisi_rde; if (!qm) return -EINVAL; - pdev = qm->pdev; - if (!pdev) - return -EINVAL; - - hisi_rde = pci_get_drvdata(pdev); - if (!hisi_rde) { - dev_err(&pdev->dev, "Hisi_rde is NULL.\n"); - return -EINVAL; - } + hisi_rde = container_of(qm, struct hisi_rde, qm); return schedule_work(&hisi_rde->reset_work); } -static int hisi_rde_get_hw_error_status(struct hisi_rde *hisi_rde) -{ - u32 err_sts; - - err_sts = readl(hisi_rde->qm.io_base + HRDE_INT_STATUS) & - HRDE_ECC_2BIT_ERR; - if (err_sts) - return err_sts; - - return 0; -} - -static int hisi_rde_check_hw_error(struct hisi_rde *hisi_rde) -{ - int ret; - - ret = hisi_qm_get_hw_error_status(&hisi_rde->qm); - if (ret) - return ret; - - return hisi_rde_get_hw_error_status(hisi_rde); -} - -static void hisi_rde_reset_prepare(struct pci_dev *pdev) -{ - struct hisi_rde *hisi_rde = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_rde->qm; - u32 delay = 0; - int ret; - - hisi_rde_set_hw_error(hisi_rde, false); - - while (hisi_rde_check_hw_error(hisi_rde)) { - msleep(++delay); - if (delay > HRDE_RST_TMOUT_MS) - return; - } - - ret = hisi_rde_reset_prepare_rdy(hisi_rde); - if (ret) { - dev_err(&pdev->dev, "FLR not ready!\n"); - return; - } - - ret = hisi_qm_stop(qm, QM_FLR); - if (ret) { - dev_err(&pdev->dev, "Stop QM failed!\n"); - return; - } - - dev_info(&pdev->dev, "FLR resetting...\n"); -} - -static void hisi_rde_flr_reset_complete(struct pci_dev *pdev, - struct hisi_rde *hisi_rde) -{ - u32 id; - - pci_read_config_dword(pdev, PCI_COMMAND, &id); - if (id == HRDE_PCI_COMMAND_INVALID) - dev_err(&pdev->dev, "Device can not be used!\n"); - - clear_bit(HISI_RDE_RESET, &hisi_rde->status); -} - -static void hisi_rde_reset_done(struct pci_dev *pdev) -{ - struct hisi_rde *hisi_rde = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_rde->qm; - int ret; - - hisi_rde_set_hw_error(hisi_rde, true); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(&pdev->dev, "Start QM failed!\n"); - goto flr_done; - } - - hisi_rde_set_user_domain_and_cache(hisi_rde); - -flr_done: - hisi_rde_flr_reset_complete(pdev, hisi_rde); - dev_info(&pdev->dev, "FLR reset complete.\n"); -} - static const struct pci_error_handlers hisi_rde_err_handler = { - .reset_prepare = hisi_rde_reset_prepare, - .reset_done = hisi_rde_reset_done, + .reset_prepare = hisi_qm_reset_prepare, + .reset_done = hisi_qm_reset_done, }; static struct pci_driver hisi_rde_pci_driver = { @@ -1223,7 +823,7 @@ static void hisi_rde_reset_done(struct pci_dev *pdev) .probe = hisi_rde_probe, .remove = hisi_rde_remove, .err_handler = &hisi_rde_err_handler, - .shutdown = hisi_rde_shutdown, + .shutdown = hisi_qm_dev_shutdown, }; static void hisi_rde_register_debugfs(void) @@ -1245,6 +845,9 @@ static int __init hisi_rde_init(void) { int ret; + INIT_LIST_HEAD(&rde_devices.list); + mutex_init(&rde_devices.lock); + rde_devices.check = NULL; hisi_rde_register_debugfs(); ret = pci_register_driver(&hisi_rde_pci_driver); diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h index 0e16452..f85dd06 100644 --- a/drivers/crypto/hisilicon/sec2/sec.h +++ b/drivers/crypto/hisilicon/sec2/sec.h @@ -11,7 +11,6 @@ #undef pr_fmt #define pr_fmt(fmt) "hisi_sec: " fmt -#define CTX_Q_NUM_DEF 24 #define FUSION_LIMIT_DEF 1 #define FUSION_LIMIT_MAX 64 #define FUSION_TMOUT_NSEC_DEF (400 * 1000) @@ -24,10 +23,6 @@ enum sec_endian { struct hisi_sec_ctrl; -enum hisi_sec_status { - HISI_SEC_RESET, -}; - struct hisi_sec_dfx { u64 send_cnt; u64 send_by_tmout; @@ -39,21 +34,19 @@ struct hisi_sec_dfx { u64 thread_cnt; u64 fake_busy_cnt; u64 busy_comp_cnt; - u64 sec_ctrl; }; struct hisi_sec { struct hisi_qm qm; - struct list_head list; struct hisi_sec_dfx sec_dfx; struct hisi_sec_ctrl *ctrl; - struct mutex *hisi_sec_list_lock; - int q_ref; int ctx_q_num; int fusion_limit; int fusion_tmout_nsec; - unsigned long status; }; +void sec_destroy_qps(struct hisi_qp **qps, int qp_num); +struct hisi_qp **sec_create_qps(void); struct hisi_sec *find_sec_device(int node); + #endif diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c index 3a362ce..0643955 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.c +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c @@ -16,6 +16,8 @@ #include "sec.h" #include "sec_crypto.h" +static atomic_t sec_active_devs; + #define SEC_ASYNC #define SEC_INVLD_REQ_ID (-1) @@ -179,6 +181,7 @@ struct hisi_sec_ctx { struct hisi_sec *sec; struct device *dev; struct hisi_sec_req_op *req_op; + struct hisi_qp **qps; struct hrtimer timer; struct work_struct work; atomic_t thread_cnt; @@ -200,11 +203,6 @@ struct hisi_sec_ctx { u64 des_weak_key[DES_WEAK_KEY_NUM] = {0x0101010101010101, 0xFEFEFEFEFEFEFEFE, 0xE0E0E0E0F1F1F1F1, 0x1F1F1F1F0E0E0E0E}; -static void sec_update_iv(struct hisi_sec_req *req, u8 *iv) -{ - // todo: update iv by cbc/ctr mode -} - static void hisi_sec_req_cb(struct hisi_qp *qp, void *); static int hisi_sec_alloc_req_id(struct hisi_sec_req *req, @@ -324,19 +322,16 @@ static enum hrtimer_restart hrtimer_handler(struct hrtimer *timer) return HRTIMER_RESTART; } -static int hisi_sec_create_qp_ctx(struct hisi_qm *qm, struct hisi_sec_ctx *ctx, - int qp_ctx_id, int alg_type, int req_type) +static int hisi_sec_create_qp_ctx(struct hisi_sec_ctx *ctx, + int qp_ctx_id, int req_type) { - struct hisi_qp *qp; struct hisi_sec_qp_ctx *qp_ctx; struct device *dev = ctx->dev; + struct hisi_qp *qp; int ret; - qp = hisi_qm_create_qp(qm, alg_type); - if (IS_ERR(qp)) - return PTR_ERR(qp); - qp_ctx = &ctx->qp_ctx[qp_ctx_id]; + qp = ctx->qps[qp_ctx_id]; qp->req_type = req_type; qp->qp_ctx = qp_ctx; #ifdef SEC_ASYNC @@ -353,10 +348,8 @@ static int hisi_sec_create_qp_ctx(struct hisi_qm *qm, struct hisi_sec_ctx *ctx, qp_ctx->req_bitmap = kcalloc(BITS_TO_LONGS(QM_Q_DEPTH), sizeof(long), GFP_ATOMIC); - if (!qp_ctx->req_bitmap) { - ret = -ENOMEM; - goto err_qm_release_qp; - } + if (!qp_ctx->req_bitmap) + return -ENOMEM; qp_ctx->req_list = kcalloc(QM_Q_DEPTH, sizeof(void *), GFP_ATOMIC); if (!qp_ctx->req_list) { @@ -407,8 +400,7 @@ static int hisi_sec_create_qp_ctx(struct hisi_qm *qm, struct hisi_sec_ctx *ctx, kfree(qp_ctx->req_list); err_free_req_bitmap: kfree(qp_ctx->req_bitmap); -err_qm_release_qp: - hisi_qm_release_qp(qp); + return ret; } @@ -424,7 +416,6 @@ static void hisi_sec_release_qp_ctx(struct hisi_sec_ctx *ctx, kfree(qp_ctx->req_bitmap); kfree(qp_ctx->req_list); kfree(qp_ctx->sqe_list); - hisi_qm_release_qp(qp_ctx->qp); } static int __hisi_sec_ctx_init(struct hisi_sec_ctx *ctx, int qlen) @@ -465,22 +456,22 @@ static void hisi_sec_get_fusion_param(struct hisi_sec_ctx *ctx, static int hisi_sec_cipher_ctx_init(struct crypto_skcipher *tfm) { struct hisi_sec_ctx *ctx = crypto_skcipher_ctx(tfm); - struct hisi_qm *qm; struct hisi_sec_cipher_ctx *c_ctx; struct hisi_sec *sec; int i, ret; crypto_skcipher_set_reqsize(tfm, sizeof(struct hisi_sec_req)); - sec = find_sec_device(cpu_to_node(smp_processor_id())); - if (!sec) { - pr_err("failed to find a proper sec device!\n"); + ctx->qps = sec_create_qps(); + if (!ctx->qps) { + pr_err("Can not create sec qps!\n"); return -ENODEV; } + + sec = container_of(ctx->qps[0]->qm, struct hisi_sec, qm); ctx->sec = sec; - qm = &sec->qm; - ctx->dev = &qm->pdev->dev; + ctx->dev = &sec->qm.pdev->dev; ctx->q_num = sec->ctx_q_num; @@ -495,7 +486,7 @@ static int hisi_sec_cipher_ctx_init(struct crypto_skcipher *tfm) hisi_sec_get_fusion_param(ctx, sec); for (i = 0; i < ctx->q_num; i++) { - ret = hisi_sec_create_qp_ctx(qm, ctx, i, 0, 0); + ret = hisi_sec_create_qp_ctx(ctx, i, 0); if (ret) goto err_sec_release_qp_ctx; } @@ -515,6 +506,7 @@ static int hisi_sec_cipher_ctx_init(struct crypto_skcipher *tfm) for (i = i - 1; i >= 0; i--) hisi_sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); + sec_destroy_qps(ctx->qps, sec->ctx_q_num); kfree(ctx->qp_ctx); return ret; } @@ -540,11 +532,8 @@ static void hisi_sec_cipher_ctx_exit(struct crypto_skcipher *tfm) for (i = 0; i < ctx->q_num; i++) hisi_sec_release_qp_ctx(ctx, &ctx->qp_ctx[i]); + sec_destroy_qps(ctx->qps, ctx->q_num); kfree(ctx->qp_ctx); - - mutex_lock(ctx->sec->hisi_sec_list_lock); - ctx->sec->q_ref -= ctx->sec->ctx_q_num; - mutex_unlock(ctx->sec->hisi_sec_list_lock); } static int hisi_sec_skcipher_get_res(struct hisi_sec_ctx *ctx, @@ -658,8 +647,6 @@ static void hisi_sec_req_cb(struct hisi_qp *qp, void *resp) dfx = &req->ctx->sec->sec_dfx; - sec_update_iv(req, req->c_req.sk_req->iv); - req->ctx->req_op->buf_unmap(req->ctx, req); req->ctx->req_op->callback(req->ctx, req); @@ -1497,20 +1484,28 @@ static int sec_skcipher_decrypt(struct skcipher_request *sk_req) int hisi_sec_register_to_crypto(int fusion_limit) { - if (fusion_limit == 1) - return crypto_register_skciphers(sec_normal_algs, - ARRAY_SIZE(sec_normal_algs)); - else - return crypto_register_skciphers(sec_fusion_algs, - ARRAY_SIZE(sec_fusion_algs)); + /* To avoid repeat register */ + if (atomic_add_return(1, &sec_active_devs) == 1) { + if (fusion_limit == 1) + return crypto_register_skciphers(sec_normal_algs, + ARRAY_SIZE(sec_normal_algs)); + else + return crypto_register_skciphers(sec_fusion_algs, + ARRAY_SIZE(sec_fusion_algs)); + } + + return 0; } void hisi_sec_unregister_from_crypto(int fusion_limit) { - if (fusion_limit == 1) - crypto_unregister_skciphers(sec_normal_algs, - ARRAY_SIZE(sec_normal_algs)); - else - crypto_unregister_skciphers(sec_fusion_algs, - ARRAY_SIZE(sec_fusion_algs)); + if (atomic_sub_return(1, &sec_active_devs) == 0) { + if (fusion_limit == 1) + crypto_unregister_skciphers(sec_normal_algs, + ARRAY_SIZE(sec_normal_algs)); + else + crypto_unregister_skciphers(sec_fusion_algs, + ARRAY_SIZE(sec_fusion_algs)); + } } + diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index ba5c478..b4e5d57f 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -23,21 +23,24 @@ #include "sec.h" #include "sec_crypto.h" -#define SEC_VF_NUM 63 #define SEC_QUEUE_NUM_V1 4096 #define SEC_QUEUE_NUM_V2 1024 -#define SEC_PCI_DEVICE_ID_PF 0xa255 -#define SEC_PCI_DEVICE_ID_VF 0xa256 +#define SEC_PF_PCI_DEVICE_ID 0xa255 +#define SEC_VF_PCI_DEVICE_ID 0xa256 -#define SEC_COMMON_REG_OFF 0x1000 +#define SEC_SQE_SIZE 128 +#define SEC_SQ_SIZE (SEC_SQE_SIZE * QM_Q_DEPTH) +#define SEC_PF_DEF_Q_NUM 64 +#define SEC_PF_DEF_Q_BASE 0 +#define SEC_CTX_Q_NUM_DEF 24 +#define SEC_CTX_Q_NUM_MAX 32 -#define SEC_MASTER_GLOBAL_CTRL 0x300000 -#define SEC_MASTER_GLOBAL_CTRL_SHUTDOWN 0x1 -#define SEC_MASTER_TRANS_RETURN 0x300150 -#define SEC_MASTER_TRANS_RETURN_RW 0x3 #define SEC_AM_CFG_SIG_PORT_MAX_TRANS 0x300014 #define SEC_SINGLE_PORT_MAX_TRANS 0x2060 - +#define SEC_CTRL_CNT_CLR_CE 0x301120 +#define SEC_CTRL_CNT_CLR_CE_BIT BIT(0) +#define SEC_ENGINE_PF_CFG_OFF 0x300000 +#define SEC_ACC_COMMON_REG_OFF 0x1000 #define SEC_CORE_INT_SOURCE 0x301010 #define SEC_CORE_INT_MASK 0x301000 #define SEC_CORE_INT_STATUS 0x301008 @@ -45,41 +48,17 @@ #define SEC_CORE_ECC_INFO 0x301C14 #define SEC_ECC_NUM(err_val) (((err_val) >> 16) & 0xFFFF) #define SEC_ECC_ADDR(err_val) ((err_val) & 0xFFFF) - #define SEC_CORE_INT_DISABLE 0x0 #define SEC_CORE_INT_ENABLE 0x1ff -#define SEC_HW_ERROR_IRQ_ENABLE 1 -#define SEC_HW_ERROR_IRQ_DISABLE 0 - -#define SEC_BD_ERR_CHK_EN0 0xEFFFFFFF -#define SEC_BD_ERR_CHK_EN1 0x7FFFF7FD -#define SEC_BD_ERR_CHK_EN3 0xFFFFBFFF -#define SEC_BD_ERR_CHK_EN_REG0 0x0380 -#define SEC_BD_ERR_CHK_EN_REG1 0x0384 -#define SEC_BD_ERR_CHK_EN_REG3 0x038c - -#define SEC_SQE_SIZE 128 -#define SEC_SQ_SIZE (SEC_SQE_SIZE * QM_Q_DEPTH) -#define SEC_PF_DEF_Q_NUM 64 -#define SEC_PF_DEF_Q_BASE 0 - -#define SEC_CTRL_CNT_CLR_CE 0x301120 -#define SEC_CTRL_CNT_CLR_CE_BIT BIT(0) - -#define SEC_ENGINE_PF_CFG_OFF 0x300000 -#define SEC_ACC_COMMON_REG_OFF 0x1000 +#define SEC_CORE_INT_CLEAR 0x1ff -#define SEC_RAS_CE_REG 0x50 -#define SEC_RAS_FE_REG 0x54 -#define SEC_RAS_NFE_REG 0x58 +#define SEC_RAS_CE_REG 0x301050 +#define SEC_RAS_FE_REG 0x301054 +#define SEC_RAS_NFE_REG 0x301058 #define SEC_RAS_CE_ENB_MSK 0x88 #define SEC_RAS_FE_ENB_MSK 0x0 #define SEC_RAS_NFE_ENB_MSK 0x177 #define SEC_RAS_DISABLE 0x0 - -#define SEC_SAA_EN_REG 0x270 -#define SEC_SAA_EN 0x17F - #define SEC_MEM_START_INIT_REG 0x0100 #define SEC_MEM_INIT_DONE_REG 0x0104 @@ -88,114 +67,39 @@ #define SEC_CLK_GATE_DISABLE (~BIT(3)) #define SEC_AXI_SHUTDOWN_ENABLE BIT(12) #define SEC_AXI_SHUTDOWN_DISABLE 0xFFFFEFFF -#define SEC_WR_MSI_PORT 0xFFFE +#define SEC_WR_MSI_PORT BIT(0) #define SEC_INTERFACE_USER_CTRL0_REG 0x0220 #define SEC_INTERFACE_USER_CTRL1_REG 0x0224 +#define SEC_SAA_EN_REG 0x270 +#define SEC_SAA_EN 0x17F +#define SEC_BD_ERR_CHK_EN_REG0 0x0380 +#define SEC_BD_ERR_CHK_EN_REG1 0x0384 +#define SEC_BD_ERR_CHK_EN_REG3 0x038c +#define SEC_BD_ERR_CHK_EN0 0xEFFFFFFF +#define SEC_BD_ERR_CHK_EN1 0x7FFFF7FD +#define SEC_BD_ERR_CHK_EN3 0xFFFFBFFF #define SEC_USER0_SMMU_NORMAL (BIT(23) | BIT(15)) #define SEC_USER1_SMMU_NORMAL (BIT(31) | BIT(23) | BIT(15) | BIT(7)) #define SEC_DELAY_10_US 10 #define SEC_POLL_TIMEOUT_US 1000 -#define SEC_WAIT_DELAY 1000 - #define SEC_DBGFS_VAL_MAX_LEN 20 -#define SEC_CHAIN_ABN_LEN 128UL -#define SEC_ENABLE 1 -#define SEC_DISABLE 0 -#define SEC_RESET_WAIT_TIMEOUT 400 -#define SEC_PCI_COMMAND_INVALID 0xFFFFFFFF - -#define FORMAT_DECIMAL 10 -#define FROZEN_RANGE_MIN 10 -#define FROZEN_RANGE_MAX 20 - -static const char sec_name[] = "hisi_sec2"; -static struct dentry *sec_debugfs_root; -static u32 pf_q_num = SEC_PF_DEF_Q_NUM; -static struct workqueue_struct *sec_wq; - -LIST_HEAD(hisi_sec_list); -DEFINE_MUTEX(hisi_sec_list_lock); - -struct hisi_sec_resource { - struct hisi_sec *sec; - int distance; - struct list_head list; -}; - -static void free_list(struct list_head *head) -{ - struct hisi_sec_resource *res, *tmp; - - list_for_each_entry_safe(res, tmp, head, list) { - list_del(&res->list); - kfree(res); - } -} - -struct hisi_sec *find_sec_device(int node) -{ - struct hisi_sec *ret = NULL; -#ifdef CONFIG_NUMA - struct hisi_sec_resource *res, *tmp; - struct hisi_sec *hisi_sec; - struct list_head *n; - struct device *dev; - LIST_HEAD(head); - - mutex_lock(&hisi_sec_list_lock); - - list_for_each_entry(hisi_sec, &hisi_sec_list, list) { - res = kzalloc(sizeof(*res), GFP_KERNEL); - if (!res) - goto err; - - dev = &hisi_sec->qm.pdev->dev; - res->sec = hisi_sec; - res->distance = node_distance(dev->numa_node, node); - - n = &head; - list_for_each_entry(tmp, &head, list) { - if (res->distance < tmp->distance) { - n = &tmp->list; - break; - } - } - list_add_tail(&res->list, n); - } - - list_for_each_entry(tmp, &head, list) { - if (tmp->sec->q_ref + tmp->sec->ctx_q_num <= pf_q_num) { - tmp->sec->q_ref += tmp->sec->ctx_q_num; - ret = tmp->sec; - break; - } - } - - free_list(&head); -#else - mutex_lock(&hisi_sec_list_lock); - - ret = list_first_entry(&hisi_sec_list, struct hisi_sec, list); -#endif - mutex_unlock(&hisi_sec_list_lock); - - return ret; - -err: - free_list(&head); - mutex_unlock(&hisi_sec_list_lock); - return NULL; -} +#define SEC_ADDR(qm, offset) ((qm)->io_base + (offset) + \ + SEC_ENGINE_PF_CFG_OFF + SEC_ACC_COMMON_REG_OFF) struct hisi_sec_hw_error { u32 int_msk; const char *msg; }; +static const char sec_name[] = "hisi_sec2"; +static struct dentry *sec_debugfs_root; +static struct hisi_qm_list sec_devices; +static struct workqueue_struct *sec_wq; + static const struct hisi_sec_hw_error sec_hw_error[] = { {.int_msk = BIT(0), .msg = "sec_axi_rresp_err_rint"}, {.int_msk = BIT(1), .msg = "sec_axi_bresp_err_rint"}, @@ -233,9 +137,7 @@ struct ctrl_debug_file { * Just relevant for PF. */ struct hisi_sec_ctrl { - u32 num_vfs; struct hisi_sec *hisi_sec; - struct dentry *debug_root; struct ctrl_debug_file files[SEC_DEBUG_FILE_NUM]; }; @@ -263,94 +165,104 @@ struct hisi_sec_ctrl { {"SEC_BD_SAA8 ", 0x301C40}, }; -static int pf_q_num_set(const char *val, const struct kernel_param *kp) +static int sec_ctx_q_num_set(const char *val, const struct kernel_param *kp) { - struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, - SEC_PCI_DEVICE_ID_PF, NULL); - u32 n, q_num; - u8 rev_id; + u32 ctx_q_num; int ret; if (!val) return -EINVAL; - if (unlikely(!pdev)) { - q_num = min_t(u32, SEC_QUEUE_NUM_V1, SEC_QUEUE_NUM_V2); - pr_info - ("No device found currently, suppose queue number is %d\n", - q_num); - } else { - rev_id = pdev->revision; - switch (rev_id) { - case QM_HW_V1: - q_num = SEC_QUEUE_NUM_V1; - break; - case QM_HW_V2: - q_num = SEC_QUEUE_NUM_V2; - break; - default: - return -EINVAL; - } - } + ret = kstrtou32(val, 10, &ctx_q_num); + if (ret) + return -EINVAL; - ret = kstrtou32(val, 10, &n); - if (ret != 0 || n > q_num) + if (!ctx_q_num || ctx_q_num > SEC_CTX_Q_NUM_MAX || ctx_q_num & 0x1) { + pr_err("ctx queue num[%u] is invalid!\n", ctx_q_num); return -EINVAL; + } return param_set_int(val, kp); } -static const struct kernel_param_ops pf_q_num_ops = { - .set = pf_q_num_set, +static const struct kernel_param_ops sec_ctx_q_num_ops = { + .set = sec_ctx_q_num_set, .get = param_get_int, }; +static u32 ctx_q_num = SEC_CTX_Q_NUM_DEF; +module_param_cb(ctx_q_num, &sec_ctx_q_num_ops, &ctx_q_num, 0444); +MODULE_PARM_DESC(ctx_q_num, "Queue num in ctx (24 default, 2, 4, ..., 32)"); -static int uacce_mode_set(const char *val, const struct kernel_param *kp) +void sec_destroy_qps(struct hisi_qp **qps, int qp_num) +{ + hisi_qm_free_qps(qps, qp_num); + kfree(qps); +} + +struct hisi_qp **sec_create_qps(void) { - u32 n; + int node = cpu_to_node(smp_processor_id()); + u32 ctx_num = ctx_q_num; + struct hisi_qp **qps; int ret; - if (!val) - return -EINVAL; + qps = kcalloc(ctx_num, sizeof(struct hisi_qp *), GFP_KERNEL); + if (!qps) + return NULL; - ret = kstrtou32(val, FORMAT_DECIMAL, &n); - if (ret != 0 || (n != UACCE_MODE_NOIOMMU && n != UACCE_MODE_NOUACCE)) - return -EINVAL; + ret = hisi_qm_alloc_qps_node(node, &sec_devices, qps, ctx_num, 0); + if (!ret) + return qps; - return param_set_int(val, kp); + kfree(qps); + return NULL; +} + +#ifdef CONFIG_CRYPTO_QM_UACCE +static int uacce_mode_set(const char *val, const struct kernel_param *kp) +{ + return mode_set(val, kp); } -static const struct kernel_param_ops uacce_mode_ops = { +static const struct kernel_param_ops sec_uacce_mode_ops = { .set = uacce_mode_set, .get = param_get_int, }; -static int ctx_q_num_set(const char *val, const struct kernel_param *kp) -{ - u32 ctx_q_num; - int ret; +static u32 uacce_mode = UACCE_MODE_NOUACCE; +module_param_cb(uacce_mode, &sec_uacce_mode_ops, &uacce_mode, 0444); +MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); +#endif - if (!val) - return -EINVAL; +static int pf_q_num_set(const char *val, const struct kernel_param *kp) +{ + return q_num_set(val, kp, SEC_PF_PCI_DEVICE_ID); +} - ret = kstrtou32(val, FORMAT_DECIMAL, &ctx_q_num); - if (ret) - return -EINVAL; +static const struct kernel_param_ops sec_pf_q_num_ops = { + .set = pf_q_num_set, + .get = param_get_int, +}; - if (ctx_q_num == 0 || ctx_q_num > QM_Q_DEPTH || ctx_q_num % 2 == 1) { - pr_err("ctx_q_num[%u] is invalid\n", ctx_q_num); - return -EINVAL; - } +static u32 pf_q_num = SEC_PF_DEF_Q_NUM; +module_param_cb(pf_q_num, &sec_pf_q_num_ops, &pf_q_num, 0444); +MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 1-4096, v2 1-1024)"); - return param_set_int(val, kp); +static int vfs_num_set(const char *val, const struct kernel_param *kp) +{ + return vf_num_set(val, kp); } -static const struct kernel_param_ops ctx_q_num_ops = { - .set = ctx_q_num_set, +static const struct kernel_param_ops vfs_num_ops = { + .set = vfs_num_set, .get = param_get_int, }; -static int fusion_limit_set(const char *val, const struct kernel_param *kp) +static u32 vfs_num; +module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444); +MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)"); + +static int sec_fusion_limit_set(const char *val, const struct kernel_param *kp) { u32 fusion_limit; int ret; @@ -358,11 +270,11 @@ static int fusion_limit_set(const char *val, const struct kernel_param *kp) if (!val) return -EINVAL; - ret = kstrtou32(val, FORMAT_DECIMAL, &fusion_limit); + ret = kstrtou32(val, 10, &fusion_limit); if (ret) return ret; - if (fusion_limit == 0 || fusion_limit > FUSION_LIMIT_MAX) { + if (!fusion_limit || fusion_limit > FUSION_LIMIT_MAX) { pr_err("fusion_limit[%u] is't at range(0, %d)", fusion_limit, FUSION_LIMIT_MAX); return -EINVAL; @@ -371,12 +283,17 @@ static int fusion_limit_set(const char *val, const struct kernel_param *kp) return param_set_int(val, kp); } -static const struct kernel_param_ops fusion_limit_ops = { - .set = fusion_limit_set, +static const struct kernel_param_ops sec_fusion_limit_ops = { + .set = sec_fusion_limit_set, .get = param_get_int, }; +static u32 fusion_limit = FUSION_LIMIT_DEF; -static int fusion_tmout_nsec_set(const char *val, const struct kernel_param *kp) +module_param_cb(fusion_limit, &sec_fusion_limit_ops, &fusion_limit, 0444); +MODULE_PARM_DESC(fusion_limit, "(1, acc_sgl_sge_nr of hisilicon QM)"); + +static int sec_fusion_tmout_ns_set(const char *val, + const struct kernel_param *kp) { u32 fusion_tmout_nsec; int ret; @@ -384,7 +301,7 @@ static int fusion_tmout_nsec_set(const char *val, const struct kernel_param *kp) if (!val) return -EINVAL; - ret = kstrtou32(val, FORMAT_DECIMAL, &fusion_tmout_nsec); + ret = kstrtou32(val, 10, &fusion_tmout_nsec); if (ret) return ret; @@ -396,53 +313,22 @@ static int fusion_tmout_nsec_set(const char *val, const struct kernel_param *kp) return param_set_int(val, kp); } -static const struct kernel_param_ops fusion_tmout_nsec_ops = { - .set = fusion_tmout_nsec_set, +static const struct kernel_param_ops sec_fusion_time_ops = { + .set = sec_fusion_tmout_ns_set, .get = param_get_int, }; - -module_param_cb(pf_q_num, &pf_q_num_ops, &pf_q_num, 0444); -MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 0-4096, v2 0-1024)"); - -static int uacce_mode = UACCE_MODE_NOUACCE; -module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); -MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); - -static int ctx_q_num = CTX_Q_NUM_DEF; -module_param_cb(ctx_q_num, &ctx_q_num_ops, &ctx_q_num, 0444); -MODULE_PARM_DESC(ctx_q_num, "Number of queue in ctx (2, 4, 6, ..., 1024)"); - -static int fusion_limit = FUSION_LIMIT_DEF; -module_param_cb(fusion_limit, &fusion_limit_ops, &fusion_limit, 0444); -MODULE_PARM_DESC(fusion_limit, "(1, acc_sgl_sge_nr)"); - -static int fusion_tmout_nsec = FUSION_TMOUT_NSEC_DEF; -module_param_cb(fusion_tmout_nsec, &fusion_tmout_nsec_ops, &fusion_tmout_nsec, - 0444); -MODULE_PARM_DESC(fusion_tmout_nsec, "(0, NSEC_PER_SEC)"); +static u32 fusion_time = FUSION_TMOUT_NSEC_DEF; /* ns */ +module_param_cb(fusion_time, &sec_fusion_time_ops, &fusion_time, 0444); +MODULE_PARM_DESC(fusion_time, "(0, NSEC_PER_SEC)"); static const struct pci_device_id hisi_sec_dev_ids[] = { - { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_PCI_DEVICE_ID_PF) }, - { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_PCI_DEVICE_ID_VF) }, + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_PF_PCI_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, SEC_VF_PCI_DEVICE_ID) }, { 0, } }; MODULE_DEVICE_TABLE(pci, hisi_sec_dev_ids); -static inline void hisi_sec_add_to_list(struct hisi_sec *hisi_sec) -{ - mutex_lock(&hisi_sec_list_lock); - list_add_tail(&hisi_sec->list, &hisi_sec_list); - mutex_unlock(&hisi_sec_list_lock); -} - -static inline void hisi_sec_remove_from_list(struct hisi_sec *hisi_sec) -{ - mutex_lock(&hisi_sec_list_lock); - list_del(&hisi_sec->list); - mutex_unlock(&hisi_sec_list_lock); -} - -u8 sec_get_endian(struct hisi_sec *hisi_sec) +static u8 sec_get_endian(struct hisi_qm *qm) { u32 reg; @@ -450,83 +336,83 @@ u8 sec_get_endian(struct hisi_sec *hisi_sec) * As for VF, it is a wrong way to get endian setting by * reading a register of the engine */ - if (hisi_sec->qm.pdev->is_virtfn) { - dev_err_ratelimited(&hisi_sec->qm.pdev->dev, - "error! shouldn't access a register in VF\n"); + if (qm->pdev->is_virtfn) { + dev_err_ratelimited(&qm->pdev->dev, + "cannot access a register in VF!\n"); return SEC_LE; } - reg = readl_relaxed(hisi_sec->qm.io_base + SEC_ENGINE_PF_CFG_OFF + + reg = readl_relaxed(qm->io_base + SEC_ENGINE_PF_CFG_OFF + SEC_ACC_COMMON_REG_OFF + SEC_CONTROL_REG); + /* BD little endian mode */ if (!(reg & BIT(0))) return SEC_LE; + /* BD 32-bits big endian mode */ else if (!(reg & BIT(1))) return SEC_32BE; + /* BD 64-bits big endian mode */ else return SEC_64BE; } -static int sec_engine_init(struct hisi_sec *hisi_sec) +static int sec_engine_init(struct hisi_qm *qm) { int ret; u32 reg; - struct hisi_qm *qm = &hisi_sec->qm; - void *base = qm->io_base + SEC_ENGINE_PF_CFG_OFF + - SEC_ACC_COMMON_REG_OFF; - - /* config sec single port max outstanding */ - writel(SEC_SINGLE_PORT_MAX_TRANS, - qm->io_base + SEC_AM_CFG_SIG_PORT_MAX_TRANS); - - /* config sec saa enable */ - writel(SEC_SAA_EN, base + SEC_SAA_EN_REG); /* disable clock gate control */ - reg = readl_relaxed(base + SEC_CONTROL_REG); + reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); reg &= SEC_CLK_GATE_DISABLE; - writel(reg, base + SEC_CONTROL_REG); + writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); - writel(0x1, base + SEC_MEM_START_INIT_REG); - ret = readl_relaxed_poll_timeout(base + - SEC_MEM_INIT_DONE_REG, reg, reg & 0x1, - SEC_DELAY_10_US, SEC_POLL_TIMEOUT_US); + writel_relaxed(0x1, SEC_ADDR(qm, SEC_MEM_START_INIT_REG)); + + ret = readl_relaxed_poll_timeout(SEC_ADDR(qm, SEC_MEM_INIT_DONE_REG), + reg, reg & 0x1, SEC_DELAY_10_US, + SEC_POLL_TIMEOUT_US); if (ret) { - dev_err(&qm->pdev->dev, "fail to init sec mem\n"); + pci_err(qm->pdev, "fail to init sec mem\n"); return ret; } - reg = readl_relaxed(base + SEC_CONTROL_REG); + reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); reg |= (0x1 << SEC_TRNG_EN_SHIFT); - writel(reg, base + SEC_CONTROL_REG); + writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); - reg = readl_relaxed(base + SEC_INTERFACE_USER_CTRL0_REG); + reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG)); reg |= SEC_USER0_SMMU_NORMAL; - writel(reg, base + SEC_INTERFACE_USER_CTRL0_REG); + writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL0_REG)); - reg = readl_relaxed(base + SEC_INTERFACE_USER_CTRL1_REG); + reg = readl_relaxed(SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG)); reg |= SEC_USER1_SMMU_NORMAL; - writel(reg, base + SEC_INTERFACE_USER_CTRL1_REG); + writel_relaxed(reg, SEC_ADDR(qm, SEC_INTERFACE_USER_CTRL1_REG)); + + writel(SEC_SINGLE_PORT_MAX_TRANS, + qm->io_base + SEC_AM_CFG_SIG_PORT_MAX_TRANS); + + writel(SEC_SAA_EN, SEC_ADDR(qm, SEC_SAA_EN_REG)); /* Enable sm4 extra mode, as ctr/ecb */ - writel(SEC_BD_ERR_CHK_EN0, base + SEC_BD_ERR_CHK_EN_REG0); + writel_relaxed(SEC_BD_ERR_CHK_EN0, + SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG0)); /* Enable sm4 xts mode multiple iv */ - writel(SEC_BD_ERR_CHK_EN1, base + SEC_BD_ERR_CHK_EN_REG1); - writel(SEC_BD_ERR_CHK_EN3, base + SEC_BD_ERR_CHK_EN_REG3); + writel_relaxed(SEC_BD_ERR_CHK_EN1, + SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG1)); + writel_relaxed(SEC_BD_ERR_CHK_EN3, + SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG3)); /* config endian */ - reg = readl_relaxed(base + SEC_CONTROL_REG); - reg |= sec_get_endian(hisi_sec); - writel(reg, base + SEC_CONTROL_REG); + reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); + reg |= sec_get_endian(qm); + writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); return 0; } -static void hisi_sec_set_user_domain_and_cache(struct hisi_sec *hisi_sec) +static int sec_set_user_domain_and_cache(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; - /* qm user domain */ writel(AXUSER_BASE, qm->io_base + QM_ARUSER_M_CFG_1); writel(ARUSER_M_CFG_ENABLE, qm->io_base + QM_ARUSER_M_CFG_ENABLE); @@ -540,22 +426,18 @@ static void hisi_sec_set_user_domain_and_cache(struct hisi_sec *hisi_sec) /* disable FLR triggered by BME(bus master enable) */ writel(PEH_AXUSER_CFG, qm->io_base + QM_PEH_AXUSER_CFG); - writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + - QM_PEH_AXUSER_CFG_ENABLE); + writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + QM_PEH_AXUSER_CFG_ENABLE); /* enable sqc,cqc writeback */ writel(SQC_CACHE_ENABLE | CQC_CACHE_ENABLE | SQC_CACHE_WB_ENABLE | CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) | FIELD_PREP(CQC_CACHE_WB_THRD, 1), qm->io_base + QM_CACHE_CTL); - if (sec_engine_init(hisi_sec)) - dev_err(&qm->pdev->dev, "sec_engine_init failed"); + return sec_engine_init(qm); } -static void hisi_sec_debug_regs_clear(struct hisi_sec *hisi_sec) +static void sec_debug_regs_clear(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; - /* clear current_qm */ writel(0x0, qm->io_base + QM_DFX_MB_CNT_VF); writel(0x0, qm->io_base + QM_DFX_DB_CNT_VF); @@ -566,50 +448,53 @@ static void hisi_sec_debug_regs_clear(struct hisi_sec *hisi_sec) hisi_qm_debug_regs_clear(qm); } -static void hisi_sec_hw_error_set_state(struct hisi_sec *hisi_sec, bool state) +static void sec_hw_error_enable(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; - void *base = qm->io_base + SEC_ENGINE_PF_CFG_OFF + - SEC_ACC_COMMON_REG_OFF; u32 val; if (qm->ver == QM_HW_V1) { writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK); - dev_info(&qm->pdev->dev, "v%d don't support hw error handle\n", - qm->ver); + pci_info(qm->pdev, "V1 not support hw error handle\n"); return; } - val = readl(base + SEC_CONTROL_REG); - if (state) { - /* clear SEC hw error source if having */ - writel(SEC_CORE_INT_ENABLE, - hisi_sec->qm.io_base + SEC_CORE_INT_SOURCE); + val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); - /* enable SEC hw error interrupts */ - writel(SEC_CORE_INT_ENABLE, qm->io_base + SEC_CORE_INT_MASK); + /* clear SEC hw error source if having */ + writel(SEC_CORE_INT_CLEAR, qm->io_base + SEC_CORE_INT_SOURCE); - /* enable RAS int */ - writel(SEC_RAS_CE_ENB_MSK, base + SEC_RAS_CE_REG); - writel(SEC_RAS_FE_ENB_MSK, base + SEC_RAS_FE_REG); - writel(SEC_RAS_NFE_ENB_MSK, base + SEC_RAS_NFE_REG); + /* enable SEC hw error interrupts */ + writel(SEC_CORE_INT_ENABLE, qm->io_base + SEC_CORE_INT_MASK); - /* enable SEC block master OOO when m-bit error occur */ - val = val | SEC_AXI_SHUTDOWN_ENABLE; - } else { - /* disable RAS int */ - writel(SEC_RAS_DISABLE, base + SEC_RAS_CE_REG); - writel(SEC_RAS_DISABLE, base + SEC_RAS_FE_REG); - writel(SEC_RAS_DISABLE, base + SEC_RAS_NFE_REG); + /* enable RAS int */ + writel(SEC_RAS_CE_ENB_MSK, qm->io_base + SEC_RAS_CE_REG); + writel(SEC_RAS_FE_ENB_MSK, qm->io_base + SEC_RAS_FE_REG); + writel(SEC_RAS_NFE_ENB_MSK, qm->io_base + SEC_RAS_NFE_REG); - /* disable SEC hw error interrupts */ - writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK); + /* enable SEC block master OOO when m-bit error occur */ + val = val | SEC_AXI_SHUTDOWN_ENABLE; - /* disable SEC block master OOO when m-bit error occur */ - val = val & SEC_AXI_SHUTDOWN_DISABLE; - } + writel(val, SEC_ADDR(qm, SEC_CONTROL_REG)); +} - writel(val, base + SEC_CONTROL_REG); +static void sec_hw_error_disable(struct hisi_qm *qm) +{ + u32 val; + + val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); + + /* disable RAS int */ + writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_CE_REG); + writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_FE_REG); + writel(SEC_RAS_DISABLE, qm->io_base + SEC_RAS_NFE_REG); + + /* disable SEC hw error interrupts */ + writel(SEC_CORE_INT_DISABLE, qm->io_base + SEC_CORE_INT_MASK); + + /* disable SEC block master OOO when m-bit error occur */ + val = val & SEC_AXI_SHUTDOWN_DISABLE; + + writel(val, SEC_ADDR(qm, SEC_CONTROL_REG)); } static inline struct hisi_qm *file_to_qm(struct ctrl_debug_file *file) @@ -629,21 +514,21 @@ static u32 current_qm_read(struct ctrl_debug_file *file) static int current_qm_write(struct ctrl_debug_file *file, u32 val) { struct hisi_qm *qm = file_to_qm(file); - struct hisi_sec_ctrl *ctrl = file->ctrl; - u32 tmp, vfq_num; + u32 vfq_num; + u32 tmp; - if (val > ctrl->num_vfs) + if (val > qm->vfs_num) return -EINVAL; /* According PF or VF Dev ID to calculation curr_qm_qp_num and store */ if (val == 0) { qm->debug.curr_qm_qp_num = qm->qp_num; } else { - vfq_num = (qm->ctrl_q_num - qm->qp_num) / ctrl->num_vfs; - if (val == ctrl->num_vfs) { + vfq_num = (qm->ctrl_q_num - qm->qp_num) / qm->vfs_num; + if (val == qm->vfs_num) { qm->debug.curr_qm_qp_num = qm->ctrl_q_num - qm->qp_num - - (ctrl->num_vfs - 1) * vfq_num; + (qm->vfs_num - 1) * vfq_num; } else { qm->debug.curr_qm_qp_num = vfq_num; } @@ -668,7 +553,7 @@ static u32 clear_enable_read(struct ctrl_debug_file *file) struct hisi_qm *qm = file_to_qm(file); return readl(qm->io_base + SEC_CTRL_CNT_CLR_CE) & - SEC_CTRL_CNT_CLR_CE_BIT; + SEC_CTRL_CNT_CLR_CE_BIT; } static int clear_enable_write(struct ctrl_debug_file *file, u32 val) @@ -676,11 +561,11 @@ static int clear_enable_write(struct ctrl_debug_file *file, u32 val) struct hisi_qm *qm = file_to_qm(file); u32 tmp; - if (val != 1 && val != 0) + if (val != 1 && val) return -EINVAL; tmp = (readl(qm->io_base + SEC_CTRL_CNT_CLR_CE) & - ~SEC_CTRL_CNT_CLR_CE_BIT) | val; + ~SEC_CTRL_CNT_CLR_CE_BIT) | val; writel(tmp, qm->io_base + SEC_CTRL_CNT_CLR_CE); return 0; @@ -695,6 +580,7 @@ static ssize_t ctrl_debug_read(struct file *filp, char __user *buf, int ret; spin_lock_irq(&file->lock); + switch (file->index) { case SEC_CURRENT_QM: val = current_qm_read(file); @@ -706,8 +592,10 @@ static ssize_t ctrl_debug_read(struct file *filp, char __user *buf, spin_unlock_irq(&file->lock); return -EINVAL; } + spin_unlock_irq(&file->lock); ret = snprintf(tbuf, SEC_DBGFS_VAL_MAX_LEN, "%u\n", val); + return simple_read_from_buffer(buf, count, pos, tbuf, ret); } @@ -726,7 +614,7 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, return -ENOSPC; len = simple_write_to_buffer(tbuf, SEC_DBGFS_VAL_MAX_LEN - 1, - pos, buf, count); + pos, buf, count); if (len < 0) return len; @@ -735,6 +623,7 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, return -EFAULT; spin_lock_irq(&file->lock); + switch (file->index) { case SEC_CURRENT_QM: ret = current_qm_write(file, val); @@ -750,6 +639,7 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, ret = -EINVAL; goto err_input; } + spin_unlock_irq(&file->lock); return count; @@ -766,12 +656,11 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, .write = ctrl_debug_write, }; -static int hisi_sec_core_debug_init(struct hisi_sec_ctrl *ctrl) +static int hisi_sec_core_debug_init(struct hisi_qm *qm) { - struct hisi_sec *hisi_sec = ctrl->hisi_sec; - struct hisi_qm *qm = &hisi_sec->qm; + struct hisi_sec *sec = container_of(qm, struct hisi_sec, qm); struct device *dev = &qm->pdev->dev; - struct hisi_sec_dfx *dfx = &hisi_sec->sec_dfx; + struct hisi_sec_dfx *dfx = &sec->sec_dfx; struct debugfs_regset32 *regset; struct dentry *tmp_d, *tmp; char buf[SEC_DBGFS_VAL_MAX_LEN]; @@ -781,7 +670,7 @@ static int hisi_sec_core_debug_init(struct hisi_sec_ctrl *ctrl) if (ret < 0) return -ENOENT; - tmp_d = debugfs_create_dir(buf, ctrl->debug_root); + tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); if (!tmp_d) return -ENOENT; @@ -847,29 +736,30 @@ static int hisi_sec_core_debug_init(struct hisi_sec_ctrl *ctrl) return 0; } -static int hisi_sec_ctrl_debug_init(struct hisi_sec_ctrl *ctrl) +static int hisi_sec_ctrl_debug_init(struct hisi_qm *qm) { + struct hisi_sec *sec = container_of(qm, struct hisi_sec, qm); struct dentry *tmp; int i; for (i = SEC_CURRENT_QM; i < SEC_DEBUG_FILE_NUM; i++) { - spin_lock_init(&ctrl->files[i].lock); - ctrl->files[i].ctrl = ctrl; - ctrl->files[i].index = i; + spin_lock_init(&sec->ctrl->files[i].lock); + sec->ctrl->files[i].ctrl = sec->ctrl; + sec->ctrl->files[i].index = i; tmp = debugfs_create_file(ctrl_debug_file_name[i], 0600, - ctrl->debug_root, ctrl->files + i, + qm->debug.debug_root, + sec->ctrl->files + i, &ctrl_debug_fops); if (!tmp) return -ENOENT; } - return hisi_sec_core_debug_init(ctrl); + return hisi_sec_core_debug_init(qm); } -static int hisi_sec_debugfs_init(struct hisi_sec *hisi_sec) +static int hisi_sec_debugfs_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; struct device *dev = &qm->pdev->dev; struct dentry *dev_d; int ret; @@ -883,9 +773,8 @@ static int hisi_sec_debugfs_init(struct hisi_sec *hisi_sec) if (ret) goto failed_to_create; - if (qm->pdev->device == SEC_PCI_DEVICE_ID_PF) { - hisi_sec->ctrl->debug_root = dev_d; - ret = hisi_sec_ctrl_debug_init(hisi_sec->ctrl); + if (qm->pdev->device == SEC_PF_PCI_DEVICE_ID) { + ret = hisi_sec_ctrl_debug_init(qm); if (ret) goto failed_to_create; } @@ -897,71 +786,62 @@ static int hisi_sec_debugfs_init(struct hisi_sec *hisi_sec) return ret; } -static void hisi_sec_debugfs_exit(struct hisi_sec *hisi_sec) +static void hisi_sec_debugfs_exit(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; - debugfs_remove_recursive(qm->debug.debug_root); + if (qm->fun_type == QM_HW_PF) { - hisi_sec_debug_regs_clear(hisi_sec); + sec_debug_regs_clear(qm); qm->debug.curr_qm_qp_num = 0; } } -static void hisi_sec_hw_error_init(struct hisi_sec *hisi_sec) +static void sec_log_hw_error(struct hisi_qm *qm, u32 err_sts) { - hisi_qm_hw_error_init(&hisi_sec->qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT - | QM_ACC_WB_NOT_READY_TIMEOUT, 0, - QM_DB_RANDOM_INVALID); - hisi_sec_hw_error_set_state(hisi_sec, true); -} + const struct hisi_sec_hw_error *errs = sec_hw_error; + struct device *dev = &qm->pdev->dev; + u32 err_val; -static void hisi_sec_open_master_ooo(struct hisi_qm *qm) -{ - u32 val; - void *base = qm->io_base + SEC_ENGINE_PF_CFG_OFF + - SEC_ACC_COMMON_REG_OFF; + while (errs->msg) { + if (errs->int_msk & err_sts) { + dev_err(dev, "%s [error status=0x%x] found\n", + errs->msg, errs->int_msk); - val = readl(base + SEC_CONTROL_REG); - writel(val & SEC_AXI_SHUTDOWN_DISABLE, base + SEC_CONTROL_REG); - writel(val | SEC_AXI_SHUTDOWN_ENABLE, base + SEC_CONTROL_REG); + if (SEC_CORE_INT_STATUS_M_ECC & errs->int_msk) { + err_val = readl(qm->io_base + + SEC_CORE_ECC_INFO); + dev_err(dev, "multi ecc sram num=0x%x\n", + SEC_ECC_NUM(err_val)); + } + } + errs++; + } } -static u32 hisi_sec_get_hw_err_status(struct hisi_qm *qm) +static u32 sec_get_hw_err_status(struct hisi_qm *qm) { return readl(qm->io_base + SEC_CORE_INT_STATUS); } -static void hisi_sec_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) +static void sec_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) { writel(err_sts, qm->io_base + SEC_CORE_INT_SOURCE); } -static void hisi_sec_log_hw_error(struct hisi_qm *qm, u32 err_sts) +static void sec_open_axi_master_ooo(struct hisi_qm *qm) { - const struct hisi_sec_hw_error *err = sec_hw_error; - struct device *dev = &qm->pdev->dev; - u32 err_val; - - while (err->msg) { - if (err->int_msk & err_sts) - dev_err(dev, "%s [error status=0x%x] found\n", - err->msg, err->int_msk); - err++; - } + u32 val; - if (SEC_CORE_INT_STATUS_M_ECC & err_sts) { - err_val = readl(qm->io_base + SEC_CORE_ECC_INFO); - dev_err(dev, "hisi-sec multi ecc sram num=0x%x\n", - SEC_ECC_NUM(err_val)); - } + val = readl(SEC_ADDR(qm, SEC_CONTROL_REG)); + writel(val & SEC_AXI_SHUTDOWN_DISABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); + writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); } -static int hisi_sec_pf_probe_init(struct hisi_sec *hisi_sec) +static int hisi_sec_pf_probe_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_sec->qm; + struct hisi_sec *hisi_sec = container_of(qm, struct hisi_sec, qm); struct hisi_sec_ctrl *ctrl; + int ret; ctrl = devm_kzalloc(&qm->pdev->dev, sizeof(*ctrl), GFP_KERNEL); if (!ctrl) @@ -983,59 +863,57 @@ static int hisi_sec_pf_probe_init(struct hisi_sec *hisi_sec) return -EINVAL; } - qm->err_ini.qm_wr_port = SEC_WR_MSI_PORT; - qm->err_ini.ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC; - qm->err_ini.open_axi_master_ooo = hisi_sec_open_master_ooo; - qm->err_ini.get_dev_hw_err_status = hisi_sec_get_hw_err_status; - qm->err_ini.clear_dev_hw_err_status = hisi_sec_clear_hw_err_status; - qm->err_ini.log_dev_hw_err = hisi_sec_log_hw_error; - hisi_sec_set_user_domain_and_cache(hisi_sec); - hisi_sec_hw_error_init(hisi_sec); + qm->err_ini.get_dev_hw_err_status = sec_get_hw_err_status; + qm->err_ini.clear_dev_hw_err_status = sec_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT | + QM_ACC_WB_NOT_READY_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; + qm->err_ini.err_info.acpi_rst = "SRST"; + qm->err_ini.hw_err_disable = sec_hw_error_disable; + qm->err_ini.hw_err_enable = sec_hw_error_enable; + qm->err_ini.set_usr_domain_cache = sec_set_user_domain_and_cache; + qm->err_ini.log_dev_hw_err = sec_log_hw_error; + qm->err_ini.open_axi_master_ooo = sec_open_axi_master_ooo; + qm->err_ini.err_info.msi_wr_port = SEC_WR_MSI_PORT; + + ret = qm->err_ini.set_usr_domain_cache(qm); + if (ret) + return ret; + + hisi_qm_dev_err_init(qm); qm->err_ini.open_axi_master_ooo(qm); - hisi_sec_debug_regs_clear(hisi_sec); + sec_debug_regs_clear(qm); return 0; } -static int hisi_sec_qm_init(struct hisi_qm *qm, struct pci_dev *pdev) +static int hisi_sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) { - enum qm_hw_ver rev_id; - - rev_id = hisi_qm_get_hw_version(pdev); - if (rev_id == QM_HW_UNKNOWN) - return -ENODEV; + int ret; +#ifdef CONFIG_CRYPTO_QM_UACCE + qm->algs = "sec\ncipher\ndigest\n"; + qm->uacce_mode = uacce_mode; +#endif qm->pdev = pdev; - qm->ver = rev_id; - + ret = hisi_qm_pre_init(qm, pf_q_num, SEC_PF_DEF_Q_BASE); + if (ret) + return ret; qm->sqe_size = SEC_SQE_SIZE; qm->dev_name = sec_name; - qm->fun_type = (pdev->device == SEC_PCI_DEVICE_ID_PF) ? - QM_HW_PF : QM_HW_VF; - qm->algs = "sec\ncipher\ndigest\n"; + qm->qm_list = &sec_devices; qm->wq = sec_wq; - switch (uacce_mode) { - case UACCE_MODE_NOUACCE: - qm->use_uacce = false; - break; - case UACCE_MODE_NOIOMMU: - qm->use_uacce = true; - break; - default: - return -EINVAL; - } - - return hisi_qm_init(qm); + return 0; } -static int hisi_sec_probe_init(struct hisi_qm *qm, struct hisi_sec *hisi_sec) +static int hisi_sec_probe_init(struct hisi_qm *qm) { if (qm->fun_type == QM_HW_PF) { - qm->qp_base = SEC_PF_DEF_Q_BASE; - qm->qp_num = pf_q_num; - qm->debug.curr_qm_qp_num = pf_q_num; - return hisi_sec_pf_probe_init(hisi_sec); + return hisi_sec_pf_probe_init(qm); } else if (qm->fun_type == QM_HW_VF) { /* * have no way to get qm configure in VM in v1 hardware, @@ -1066,660 +944,104 @@ static int hisi_sec_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (!hisi_sec) return -ENOMEM; - pci_set_drvdata(pdev, hisi_sec); - - hisi_sec_add_to_list(hisi_sec); + qm = &hisi_sec->qm; + qm->fun_type = pdev->is_physfn ? QM_HW_PF : QM_HW_VF; - hisi_sec->hisi_sec_list_lock = &hisi_sec_list_lock; + ret = hisi_sec_qm_pre_init(qm, pdev); + if (ret) + return ret; hisi_sec->ctx_q_num = ctx_q_num; hisi_sec->fusion_limit = fusion_limit; + hisi_sec->fusion_tmout_nsec = fusion_time; - hisi_sec->fusion_tmout_nsec = fusion_tmout_nsec; - - qm = &hisi_sec->qm; - - ret = hisi_sec_qm_init(qm, pdev); + ret = hisi_qm_init(qm); if (ret) { - dev_err(&pdev->dev, "Failed to pre init qm!\n"); - goto err_remove_from_list; + pci_err(pdev, "Failed to init qm (%d)!\n", ret); + return ret; } - ret = hisi_sec_probe_init(qm, hisi_sec); + ret = hisi_sec_probe_init(qm); if (ret) { - dev_err(&pdev->dev, "Failed to probe!\n"); + pci_err(pdev, "Failed to probe init (%d)!\n", ret); goto err_qm_uninit; } ret = hisi_qm_start(qm); - if (ret) + if (ret) { + pci_err(pdev, "Failed to start qm (%d)!\n", ret); goto err_qm_uninit; + } - ret = hisi_sec_debugfs_init(hisi_sec); + ret = hisi_sec_debugfs_init(qm); if (ret) - dev_err(&pdev->dev, "Failed to init debugfs (%d)!\n", ret); - - return 0; - - err_qm_uninit: - hisi_qm_uninit(qm); - err_remove_from_list: - hisi_sec_remove_from_list(hisi_sec); - return ret; -} - -/* now we only support equal assignment */ -static int hisi_sec_vf_q_assign(struct hisi_sec *hisi_sec, u32 num_vfs) -{ - struct hisi_qm *qm = &hisi_sec->qm; - u32 qp_num = qm->qp_num; - u32 q_base = qp_num; - u32 q_num, remain_q_num, i; - int ret; + pci_warn(pdev, "Failed to init debugfs (%d)!\n", ret); - if (!num_vfs) - return -EINVAL; - - remain_q_num = qm->ctrl_q_num - qp_num; - q_num = remain_q_num / num_vfs; + hisi_qm_add_to_list(qm, &sec_devices); - for (i = 1; i <= num_vfs; i++) { - if (i == num_vfs) - q_num += remain_q_num % num_vfs; - ret = hisi_qm_set_vft(qm, i, q_base, q_num); - if (ret) - return ret; - q_base += q_num; + ret = hisi_sec_register_to_crypto(fusion_limit); + if (ret < 0) { + pci_err(pdev, "Failed to register driver to crypto!\n"); + goto err_remove_from_list; } - return 0; -} - -static int hisi_sec_clear_vft_config(struct hisi_sec *hisi_sec) -{ - struct hisi_sec_ctrl *ctrl = hisi_sec->ctrl; - struct hisi_qm *qm = &hisi_sec->qm; - u32 num_vfs = ctrl->num_vfs; - int ret; - u32 i; - - for (i = 1; i <= num_vfs; i++) { - ret = hisi_qm_set_vft(qm, i, 0, 0); - if (ret) - return ret; + if (qm->fun_type == QM_HW_PF && vfs_num > 0) { + ret = hisi_qm_sriov_enable(pdev, vfs_num); + if (ret < 0) + goto err_crypto_unregister; } - ctrl->num_vfs = 0; - return 0; -} - -static int hisi_sec_sriov_enable(struct pci_dev *pdev, int max_vfs) -{ -#ifdef CONFIG_PCI_IOV - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - u32 num_vfs; - int pre_existing_vfs, ret; - - pre_existing_vfs = pci_num_vf(pdev); - - if (pre_existing_vfs) { - dev_err(&pdev->dev, - "Can't enable VF. Please disable pre-enabled VFs!\n"); - return 0; - } - - num_vfs = min_t(u32, max_vfs, SEC_VF_NUM); - - ret = hisi_sec_vf_q_assign(hisi_sec, num_vfs); - if (ret) { - dev_err(&pdev->dev, "Can't assign queues for VF!\n"); - return ret; - } - hisi_sec->ctrl->num_vfs = num_vfs; +err_crypto_unregister: + hisi_sec_unregister_from_crypto(fusion_limit); - ret = pci_enable_sriov(pdev, num_vfs); - if (ret) { - dev_err(&pdev->dev, "Can't enable VF!\n"); - hisi_sec_clear_vft_config(hisi_sec); - return ret; - } +err_remove_from_list: + hisi_qm_del_from_list(qm, &sec_devices); + hisi_sec_debugfs_exit(qm); + hisi_qm_stop(qm, QM_NORMAL); - return num_vfs; -#else - return 0; -#endif -} - -static int hisi_sec_try_frozen_vfs(struct pci_dev *pdev) -{ - struct hisi_sec *sec, *vf_sec; - struct pci_dev *dev; - int ret = 0; - - /* Try to frozen all the VFs as disable SRIOV */ - mutex_lock(&hisi_sec_list_lock); - list_for_each_entry(sec, &hisi_sec_list, list) { - dev = sec->qm.pdev; - if (dev == pdev) - continue; - if (pci_physfn(dev) == pdev) { - vf_sec = pci_get_drvdata(dev); - ret = hisi_qm_frozen(&vf_sec->qm); - if (ret) - goto frozen_fail; - } - } +err_qm_uninit: + hisi_qm_uninit(qm); -frozen_fail: - mutex_unlock(&hisi_sec_list_lock); return ret; } -static int hisi_sec_sriov_disable(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - - if (pci_vfs_assigned(pdev)) { - dev_err(&pdev->dev, - "Can't disable VFs while VFs are assigned!\n"); - return -EPERM; - } - - if (hisi_sec_try_frozen_vfs(pdev)) { - dev_err(&pdev->dev, "try frozen VFs failed!\n"); - return -EBUSY; - } - - /* remove in hisi_sec_pci_driver will be called to free VF resources */ - pci_disable_sriov(pdev); - return hisi_sec_clear_vft_config(hisi_sec); -} - static int hisi_sec_sriov_configure(struct pci_dev *pdev, int num_vfs) { if (num_vfs == 0) - return hisi_sec_sriov_disable(pdev); + return hisi_qm_sriov_disable(pdev, &sec_devices); else - return hisi_sec_sriov_enable(pdev, num_vfs); -} - -static void hisi_sec_remove_wait_delay(struct hisi_sec *hisi_sec) -{ - struct hisi_qm *qm = &hisi_sec->qm; - - while (hisi_qm_frozen(qm) || ((qm->fun_type == QM_HW_PF) && - hisi_sec_try_frozen_vfs(qm->pdev))) - usleep_range(FROZEN_RANGE_MIN, FROZEN_RANGE_MAX); - - udelay(SEC_WAIT_DELAY); + return hisi_qm_sriov_enable(pdev, num_vfs); } static void hisi_sec_remove(struct pci_dev *pdev) { - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_sec->qm; + struct hisi_qm *qm = pci_get_drvdata(pdev); if (uacce_mode != UACCE_MODE_NOUACCE) - hisi_sec_remove_wait_delay(hisi_sec); + hisi_qm_remove_wait_delay(qm, &sec_devices); + + if (qm->fun_type == QM_HW_PF && qm->vfs_num) + (void)hisi_qm_sriov_disable(pdev, NULL); - if (qm->fun_type == QM_HW_PF && hisi_sec->ctrl->num_vfs != 0) - (void)hisi_sec_sriov_disable(pdev); + hisi_sec_unregister_from_crypto(fusion_limit); - hisi_sec_debugfs_exit(hisi_sec); + hisi_qm_del_from_list(qm, &sec_devices); + hisi_sec_debugfs_exit(qm); (void)hisi_qm_stop(qm, QM_NORMAL); if (qm->fun_type == QM_HW_PF) - hisi_sec_hw_error_set_state(hisi_sec, false); + hisi_qm_dev_err_uninit(qm); hisi_qm_uninit(qm); - hisi_sec_remove_from_list(hisi_sec); -} - -static void hisi_sec_shutdown(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - - hisi_qm_stop(&hisi_sec->qm, QM_NORMAL); -} - -static pci_ers_result_t hisi_sec_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - if (pdev->is_virtfn) - return PCI_ERS_RESULT_NONE; - - dev_info(&pdev->dev, "PCI error detected, state(=%d)!!\n", state); - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - return hisi_qm_process_dev_error(pdev); -} - -static int hisi_sec_reset_prepare_ready(struct hisi_sec *hisi_sec) -{ - struct pci_dev *pdev = hisi_sec->qm.pdev; - struct hisi_sec *sec = pci_get_drvdata(pci_physfn(pdev)); - int delay = 0; - - while (test_and_set_bit(HISI_SEC_RESET, &sec->status)) { - msleep(++delay); - if (delay > SEC_RESET_WAIT_TIMEOUT) - return -EBUSY; - } - - return 0; -} - -static int hisi_sec_vf_reset_prepare(struct pci_dev *pdev, - enum qm_stop_reason stop_reason) -{ - struct hisi_sec *hisi_sec; - struct pci_dev *dev; - struct hisi_qm *qm; - int ret = 0; - - mutex_lock(&hisi_sec_list_lock); - if (pdev->is_physfn) { - list_for_each_entry(hisi_sec, &hisi_sec_list, list) { - dev = hisi_sec->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hisi_sec->qm; - - ret = hisi_qm_stop(qm, stop_reason); - if (ret) - goto prepare_fail; - } - } - } - -prepare_fail: - mutex_unlock(&hisi_sec_list_lock); - return ret; -} - -static int hisi_sec_controller_reset_prepare(struct hisi_sec *hisi_sec) -{ - struct hisi_qm *qm = &hisi_sec->qm; - struct pci_dev *pdev = qm->pdev; - int ret; - - ret = hisi_sec_reset_prepare_ready(hisi_sec); - if (ret) { - dev_err(&pdev->dev, "Controller reset not ready!\n"); - return ret; - } - - ret = hisi_sec_vf_reset_prepare(pdev, QM_SOFT_RESET); - if (ret) { - dev_err(&pdev->dev, "Fails to stop VFs!\n"); - return ret; - } - - ret = hisi_qm_stop(qm, QM_SOFT_RESET); - if (ret) { - dev_err(&pdev->dev, "Fails to stop QM!\n"); - return ret; - } - -#ifdef CONFIG_CRYPTO_QM_UACCE - if (qm->use_uacce) { - ret = uacce_hw_err_isolate(&qm->uacce); - if (ret) { - dev_err(&pdev->dev, "Fails to isolate hw err!\n"); - return ret; - } - } -#endif - - return 0; -} - -static int hisi_sec_soft_reset(struct hisi_sec *hisi_sec) -{ - struct hisi_qm *qm = &hisi_sec->qm; - struct device *dev = &qm->pdev->dev; - unsigned long long value; - int ret; - u32 val; - - ret = hisi_qm_reg_test(qm); - if (ret) - return ret; - - ret = hisi_qm_set_vf_mse(qm, SEC_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable vf mse bit.\n"); - return ret; - } - - ret = hisi_qm_set_msi(qm, SEC_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable peh msi bit.\n"); - return ret; - } - - /* Set qm ecc if dev ecc happened to hold on ooo */ - hisi_qm_set_ecc(qm); - - /* OOO register set and check */ - writel(SEC_MASTER_GLOBAL_CTRL_SHUTDOWN, - hisi_sec->qm.io_base + SEC_MASTER_GLOBAL_CTRL); - - /* If bus lock, reset chip */ - ret = readl_relaxed_poll_timeout(hisi_sec->qm.io_base + - SEC_MASTER_TRANS_RETURN, - val, - (val == SEC_MASTER_TRANS_RETURN_RW), - SEC_DELAY_10_US, - SEC_POLL_TIMEOUT_US); - if (ret) { - dev_emerg(dev, "Bus lock! Please reset system.\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, SEC_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable pf mse bit.\n"); - return ret; - } - - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(dev)) { - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(dev), "SRST", - NULL, &value); - if (ACPI_FAILURE(s) || value) { - dev_err(dev, "Controller reset fails %lld\n", value); - return -EIO; - } - } else { - dev_err(dev, "No reset method!\n"); - return -EINVAL; - } - - return 0; -} - -static int hisi_sec_vf_reset_done(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec; - struct pci_dev *dev; - struct hisi_qm *qm; - int ret = 0; - - mutex_lock(&hisi_sec_list_lock); - list_for_each_entry(hisi_sec, &hisi_sec_list, list) { - dev = hisi_sec->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hisi_sec->qm; - - ret = hisi_qm_restart(qm); - if (ret) - goto reset_fail; - } - } - -reset_fail: - mutex_unlock(&hisi_sec_list_lock); - return ret; -} - -static int hisi_sec_controller_reset_done(struct hisi_sec *hisi_sec) -{ - struct hisi_qm *qm = &hisi_sec->qm; - struct pci_dev *pdev = qm->pdev; - struct device *dev = &pdev->dev; - int ret; - - ret = hisi_qm_set_msi(qm, SEC_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable peh msi bit!\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, SEC_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable pf mse bit!\n"); - return ret; - } - - ret = hisi_qm_set_vf_mse(qm, SEC_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable vf mse bit!\n"); - return ret; - } - - hisi_sec_set_user_domain_and_cache(hisi_sec); - hisi_qm_restart_prepare(qm); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - return -EPERM; - } - - if (hisi_sec->ctrl->num_vfs) { - ret = hisi_sec_vf_q_assign(hisi_sec, hisi_sec->ctrl->num_vfs); - if (ret) { - dev_err(dev, "Failed to assign vf queues!\n"); - return ret; - } - } - - ret = hisi_sec_vf_reset_done(pdev); - if (ret) { - dev_err(dev, "Failed to start VFs!\n"); - return -EPERM; - } - - hisi_qm_restart_done(qm); - hisi_sec_hw_error_init(hisi_sec); - - return 0; -} - -static int hisi_sec_controller_reset(struct hisi_sec *hisi_sec) -{ - struct device *dev = &hisi_sec->qm.pdev->dev; - int ret; - - dev_info(dev, "Controller resetting...\n"); - - ret = hisi_sec_controller_reset_prepare(hisi_sec); - if (ret) - return ret; - - ret = hisi_sec_soft_reset(hisi_sec); - if (ret) { - dev_err(dev, "Controller reset failed (%d)\n", ret); - return ret; - } - - ret = hisi_sec_controller_reset_done(hisi_sec); - if (ret) - return ret; - - clear_bit(HISI_SEC_RESET, &hisi_sec->status); - dev_info(dev, "Controller reset complete\n"); - - return 0; -} - -static pci_ers_result_t hisi_sec_slot_reset(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - int ret; - - if (pdev->is_virtfn) - return PCI_ERS_RESULT_RECOVERED; - - dev_info(&pdev->dev, "Requesting reset due to PCI error\n"); - - pci_cleanup_aer_uncorrect_error_status(pdev); - - /* reset sec controller */ - ret = hisi_sec_controller_reset(hisi_sec); - if (ret) { - dev_warn(&pdev->dev, "hisi_sec controller reset failed (%d)\n", - ret); - return PCI_ERS_RESULT_DISCONNECT; - } - - return PCI_ERS_RESULT_RECOVERED; -} - -static void hisi_sec_set_hw_error(struct hisi_sec *hisi_sec, bool state) -{ - struct pci_dev *pdev = hisi_sec->qm.pdev; - struct hisi_sec *sec = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &sec->qm; - - if (qm->fun_type == QM_HW_VF) - return; - - if (state) - hisi_qm_hw_error_init(qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT, - 0, QM_DB_RANDOM_INVALID); - else - hisi_qm_hw_error_uninit(qm); - - hisi_sec_hw_error_set_state(sec, state); -} - -static int hisi_sec_get_hw_error_status(struct hisi_sec *hisi_sec) -{ - u32 err_sts; - - err_sts = readl(hisi_sec->qm.io_base + SEC_CORE_INT_STATUS) & - SEC_CORE_INT_STATUS_M_ECC; - if (err_sts) - return err_sts; - - return 0; -} - -static int hisi_sec_check_hw_error(struct hisi_sec *hisi_sec) -{ - struct pci_dev *pdev = hisi_sec->qm.pdev; - struct hisi_sec *sec = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &sec->qm; - int ret; - - if (qm->fun_type == QM_HW_VF) - return 0; - - ret = hisi_qm_get_hw_error_status(qm); - if (ret) - return ret; - - return hisi_sec_get_hw_error_status(sec); -} - -static void hisi_sec_reset_prepare(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_sec->qm; - struct device *dev = &pdev->dev; - u32 delay = 0; - int ret; - - hisi_sec_set_hw_error(hisi_sec, SEC_HW_ERROR_IRQ_DISABLE); - - while (hisi_sec_check_hw_error(hisi_sec)) { - msleep(++delay); - if (delay > SEC_RESET_WAIT_TIMEOUT) - return; - } - - ret = hisi_sec_reset_prepare_ready(hisi_sec); - if (ret) { - dev_err(dev, "FLR not ready!\n"); - return; - } - - ret = hisi_sec_vf_reset_prepare(pdev, QM_FLR); - if (ret) { - dev_err(dev, "Fails to prepare reset!\n"); - return; - } - - ret = hisi_qm_stop(qm, QM_FLR); - if (ret) { - dev_err(dev, "Fails to stop QM!\n"); - return; - } - - dev_info(dev, "FLR resetting...\n"); -} - -static void hisi_sec_flr_reset_complete(struct pci_dev *pdev) -{ - struct pci_dev *pf_pdev = pci_physfn(pdev); - struct hisi_sec *hisi_sec = pci_get_drvdata(pf_pdev); - struct device *dev = &hisi_sec->qm.pdev->dev; - u32 id; - - pci_read_config_dword(hisi_sec->qm.pdev, PCI_COMMAND, &id); - if (id == SEC_PCI_COMMAND_INVALID) - dev_err(dev, "Device can not be used!\n"); - - clear_bit(HISI_SEC_RESET, &hisi_sec->status); -} - -static void hisi_sec_reset_done(struct pci_dev *pdev) -{ - struct hisi_sec *hisi_sec = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_sec->qm; - struct device *dev = &pdev->dev; - int ret; - - hisi_sec_set_hw_error(hisi_sec, SEC_HW_ERROR_IRQ_ENABLE); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - goto flr_done; - } - - if (pdev->is_physfn) { - hisi_sec_set_user_domain_and_cache(hisi_sec); - if (hisi_sec->ctrl->num_vfs) { - ret = hisi_sec_vf_q_assign(hisi_sec, - hisi_sec->ctrl->num_vfs); - if (ret) { - dev_err(dev, "Failed to assign vf queue\n"); - goto flr_done; - } - } - - ret = hisi_sec_vf_reset_done(pdev); - if (ret) { - dev_err(dev, "Failed to reset vf\n"); - goto flr_done; - } - } - -flr_done: - hisi_sec_flr_reset_complete(pdev); - - dev_info(dev, "FLR reset complete\n"); } static const struct pci_error_handlers hisi_sec_err_handler = { - .error_detected = hisi_sec_error_detected, - .slot_reset = hisi_sec_slot_reset, - .reset_prepare = hisi_sec_reset_prepare, - .reset_done = hisi_sec_reset_done, + .error_detected = hisi_qm_dev_err_detected, + .slot_reset = hisi_qm_dev_slot_reset, + .reset_prepare = hisi_qm_reset_prepare, + .reset_done = hisi_qm_reset_done, }; static struct pci_driver hisi_sec_pci_driver = { @@ -1729,7 +1051,7 @@ static void hisi_sec_reset_done(struct pci_dev *pdev) .remove = hisi_sec_remove, .sriov_configure = hisi_sec_sriov_configure, .err_handler = &hisi_sec_err_handler, - .shutdown = hisi_sec_shutdown, + .shutdown = hisi_qm_dev_shutdown, }; static void hisi_sec_register_debugfs(void) @@ -1759,35 +1081,25 @@ static int __init hisi_sec_init(void) return -ENOMEM; } + INIT_LIST_HEAD(&sec_devices.list); + mutex_init(&sec_devices.lock); + sec_devices.check = NULL; + hisi_sec_register_debugfs(); ret = pci_register_driver(&hisi_sec_pci_driver); if (ret < 0) { + hisi_sec_unregister_debugfs(); + if (sec_wq) + destroy_workqueue(sec_wq); pr_err("Failed to register pci driver.\n"); - goto err_pci; - } - - pr_info("hisi_sec: register to crypto\n"); - ret = hisi_sec_register_to_crypto(fusion_limit); - if (ret < 0) { - pr_err("Failed to register driver to crypto.\n"); - goto err_probe_device; } - return 0; - - err_probe_device: - pci_unregister_driver(&hisi_sec_pci_driver); - err_pci: - hisi_sec_unregister_debugfs(); - if (sec_wq) - destroy_workqueue(sec_wq); return ret; } static void __exit hisi_sec_exit(void) { - hisi_sec_unregister_from_crypto(fusion_limit); pci_unregister_driver(&hisi_sec_pci_driver); hisi_sec_unregister_debugfs(); if (sec_wq) diff --git a/drivers/crypto/hisilicon/zip/zip.h b/drivers/crypto/hisilicon/zip/zip.h index 560751a..ddd5924 100644 --- a/drivers/crypto/hisilicon/zip/zip.h +++ b/drivers/crypto/hisilicon/zip/zip.h @@ -18,19 +18,12 @@ enum hisi_zip_error_type { }; struct hisi_zip_ctrl; - -enum hisi_zip_status { - HISI_ZIP_RESET, -}; - struct hisi_zip { struct hisi_qm qm; - struct list_head list; struct hisi_zip_ctrl *ctrl; - unsigned long status; }; -struct hisi_zip *find_zip_device(int node); +int zip_create_qps(struct hisi_qp **qps, int ctx_num); int hisi_zip_register_to_crypto(void); void hisi_zip_unregister_from_crypto(void); #endif diff --git a/drivers/crypto/hisilicon/zip/zip_crypto.c b/drivers/crypto/hisilicon/zip/zip_crypto.c index b2965ba..b247021 100644 --- a/drivers/crypto/hisilicon/zip/zip_crypto.c +++ b/drivers/crypto/hisilicon/zip/zip_crypto.c @@ -153,26 +153,19 @@ static void hisi_zip_fill_sqe(struct hisi_zip_sqe *sqe, u8 req_type, sqe->dest_addr_h = upper_32_bits(d_addr); } -static int hisi_zip_create_qp(struct hisi_qm *qm, struct hisi_zip_qp_ctx *ctx, +static int hisi_zip_start_qp(struct hisi_qp *qp, struct hisi_zip_qp_ctx *ctx, int alg_type, int req_type) { - struct device *dev = &qm->pdev->dev; - struct hisi_qp *qp; + struct device *dev = &qp->qm->pdev->dev; int ret; - qp = hisi_qm_create_qp(qm, alg_type); - if (IS_ERR(qp)) { - dev_err(dev, "create qp failed!\n"); - return PTR_ERR(qp); - } - qp->req_type = req_type; + qp->alg_type = alg_type; qp->qp_ctx = ctx; ret = hisi_qm_start_qp(qp, 0); if (ret < 0) { dev_err(dev, "start qp failed!\n"); - hisi_qm_release_qp(qp); return ret; } @@ -188,26 +181,27 @@ static void hisi_zip_release_qp(struct hisi_zip_qp_ctx *ctx) static int hisi_zip_ctx_init(struct hisi_zip_ctx *hisi_zip_ctx, u8 req_type) { + struct hisi_qp *qps[HZIP_CTX_Q_NUM] = { NULL }; struct hisi_zip *hisi_zip; - struct hisi_qm *qm; int ret, i, j; - /* find the proper zip device */ - hisi_zip = find_zip_device(cpu_to_node(smp_processor_id())); - if (!hisi_zip) { - pr_err("Failed to find a proper ZIP device!\n"); + ret = zip_create_qps(qps, HZIP_CTX_Q_NUM); + if (ret) { + pr_err("Can not create zip qps!\n"); return -ENODEV; } - qm = &hisi_zip->qm; + + hisi_zip = container_of(qps[0]->qm, struct hisi_zip, qm); for (i = 0; i < HZIP_CTX_Q_NUM; i++) { /* alg_type = 0 for compress, 1 for decompress in hw sqe */ - ret = hisi_zip_create_qp(qm, &hisi_zip_ctx->qp_ctx[i], i, + ret = hisi_zip_start_qp(qps[i], &hisi_zip_ctx->qp_ctx[i], i, req_type); if (ret) { for (j = i - 1; j >= 0; j--) - hisi_zip_release_qp(&hisi_zip_ctx->qp_ctx[j]); + hisi_qm_stop_qp(hisi_zip_ctx->qp_ctx[j].qp); + hisi_qm_free_qps(qps, HZIP_CTX_Q_NUM); return ret; } diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index 5e40fbf..54681dc 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -15,7 +15,6 @@ #include <linux/uacce.h> #include "zip.h" -#define HZIP_VF_NUM 63 #define HZIP_QUEUE_NUM_V1 4096 #define HZIP_QUEUE_NUM_V2 1024 @@ -75,7 +74,6 @@ #define HZIP_CORE_SRAM_ECC_ERR_INFO 0x301148 #define HZIP_CORE_INT_RAS_CE_ENB 0x301160 #define HZIP_CORE_INT_RAS_NFE_ENB 0x301164 -#define HZIP_RAS_NFE_MBIT_DISABLE ~HZIP_CORE_INT_STATUS_M_ECC #define HZIP_CORE_INT_RAS_FE_ENB 0x301168 #define HZIP_CORE_INT_RAS_NFE_ENABLE 0x7FE #define HZIP_SRAM_ECC_ERR_NUM_SHIFT 16 @@ -95,95 +93,14 @@ #define HZIP_SOFT_CTRL_ZIP_CONTROL 0x30100C #define HZIP_AXI_SHUTDOWN_ENABLE BIT(14) #define HZIP_AXI_SHUTDOWN_DISABLE 0xFFFFBFFF -#define HZIP_WR_MSI_PORT 0xF7FF +#define HZIP_WR_PORT BIT(11) -#define HZIP_ENABLE 1 -#define HZIP_DISABLE 0 -#define HZIP_NUMA_DISTANCE 100 #define HZIP_BUF_SIZE 22 #define FORMAT_DECIMAL 10 -#define HZIP_REG_RD_INTVRL_US 10 -#define HZIP_REG_RD_TMOUT_US 1000 -#define HZIP_RESET_WAIT_TIMEOUT 400 -#define HZIP_PCI_COMMAND_INVALID 0xFFFFFFFF - -#define FROZEN_RANGE_MIN 10 -#define FROZEN_RANGE_MAX 20 static const char hisi_zip_name[] = "hisi_zip"; static struct dentry *hzip_debugfs_root; -static LIST_HEAD(hisi_zip_list); -static DEFINE_MUTEX(hisi_zip_list_lock); - -struct hisi_zip_resource { - struct hisi_zip *hzip; - int distance; - struct list_head list; -}; - -static void free_list(struct list_head *head) -{ - struct hisi_zip_resource *res, *tmp; - - list_for_each_entry_safe(res, tmp, head, list) { - list_del(&res->list); - kfree(res); - } -} - -struct hisi_zip *find_zip_device(int node) -{ - struct hisi_zip *ret = NULL; -#ifdef CONFIG_NUMA - struct hisi_zip_resource *res, *tmp; - struct hisi_zip *hisi_zip; - struct list_head *n; - struct device *dev; - LIST_HEAD(head); - - mutex_lock(&hisi_zip_list_lock); - - list_for_each_entry(hisi_zip, &hisi_zip_list, list) { - res = kzalloc(sizeof(*res), GFP_KERNEL); - if (!res) - goto err; - - dev = &hisi_zip->qm.pdev->dev; - res->hzip = hisi_zip; - res->distance = node_distance(dev->numa_node, node); - - n = &head; - list_for_each_entry(tmp, &head, list) { - if (res->distance < tmp->distance) { - n = &tmp->list; - break; - } - } - list_add_tail(&res->list, n); - } - - list_for_each_entry(tmp, &head, list) { - if (hisi_qm_get_free_qp_num(&tmp->hzip->qm)) { - ret = tmp->hzip; - break; - } - } - - free_list(&head); -#else - mutex_lock(&hisi_zip_list_lock); - - ret = list_first_entry(&hisi_zip_list, struct hisi_zip, list); -#endif - mutex_unlock(&hisi_zip_list_lock); - - return ret; - -err: - free_list(&head); - mutex_unlock(&hisi_zip_list_lock); - return NULL; -} +static struct hisi_qm_list zip_devices; struct hisi_zip_hw_error { u32 int_msk; @@ -229,9 +146,7 @@ struct ctrl_debug_file { * Just relevant for PF. */ struct hisi_zip_ctrl { - u32 num_vfs; struct hisi_zip *hisi_zip; - struct dentry *debug_root; struct ctrl_debug_file files[HZIP_DEBUG_FILE_NUM]; }; @@ -282,73 +197,49 @@ enum { {"HZIP_DECOMP_LZ77_CURR_ST ", 0x9cull}, }; -static int pf_q_num_set(const char *val, const struct kernel_param *kp) +#ifdef CONFIG_CRYPTO_QM_UACCE +static int uacce_mode_set(const char *val, const struct kernel_param *kp) { - struct pci_dev *pdev = pci_get_device(PCI_VENDOR_ID_HUAWEI, - PCI_DEVICE_ID_ZIP_PF, NULL); - u32 n, q_num; - u8 rev_id; - int ret; - - if (!val) - return -EINVAL; + return mode_set(val, kp); +} - if (!pdev) { - q_num = min_t(u32, HZIP_QUEUE_NUM_V1, HZIP_QUEUE_NUM_V2); - pr_info("No device found currently, suppose queue number is %d\n", - q_num); - } else { - rev_id = pdev->revision; - switch (rev_id) { - case QM_HW_V1: - q_num = HZIP_QUEUE_NUM_V1; - break; - case QM_HW_V2: - q_num = HZIP_QUEUE_NUM_V2; - break; - default: - return -EINVAL; - } - } +static const struct kernel_param_ops uacce_mode_ops = { + .set = uacce_mode_set, + .get = param_get_int, +}; - ret = kstrtou32(val, 10, &n); - if (ret != 0 || n == 0 || n > q_num) - return -EINVAL; +static int uacce_mode = UACCE_MODE_NOUACCE; +module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); +MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); +#endif - return param_set_int(val, kp); +static int pf_q_num_set(const char *val, const struct kernel_param *kp) +{ + return q_num_set(val, kp, PCI_DEVICE_ID_ZIP_PF); } static const struct kernel_param_ops pf_q_num_ops = { .set = pf_q_num_set, .get = param_get_int, }; -static int uacce_mode_set(const char *val, const struct kernel_param *kp) -{ - u32 n; - int ret; - - if (!val) - return -EINVAL; - ret = kstrtou32(val, FORMAT_DECIMAL, &n); - if (ret != 0 || (n != UACCE_MODE_NOIOMMU && n != UACCE_MODE_NOUACCE)) - return -EINVAL; +static u32 pf_q_num = HZIP_PF_DEF_Q_NUM; +module_param_cb(pf_q_num, &pf_q_num_ops, &pf_q_num, 0444); +MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 1-4096, v2 1-1024)"); - return param_set_int(val, kp); +static int vfs_num_set(const char *val, const struct kernel_param *kp) +{ + return vf_num_set(val, kp); } -static const struct kernel_param_ops uacce_mode_ops = { - .set = uacce_mode_set, +static const struct kernel_param_ops vfs_num_ops = { + .set = vfs_num_set, .get = param_get_int, }; -static u32 pf_q_num = HZIP_PF_DEF_Q_NUM; -module_param_cb(pf_q_num, &pf_q_num_ops, &pf_q_num, 0444); -MODULE_PARM_DESC(pf_q_num, "Number of queues in PF(v1 1-4096, v2 1-1024)"); - -static int uacce_mode = UACCE_MODE_NOUACCE; -module_param_cb(uacce_mode, &uacce_mode_ops, &uacce_mode, 0444); -MODULE_PARM_DESC(uacce_mode, "Mode of UACCE can be 0(default), 2"); +static u32 vfs_num; +module_param_cb(vfs_num, &vfs_num_ops, &vfs_num, 0444); +MODULE_PARM_DESC(vfs_num, "Number of VFs to enable(1-63), 0(default)"); static const struct pci_device_id hisi_zip_dev_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_HUAWEI, PCI_DEVICE_ID_ZIP_PF) }, @@ -357,81 +248,67 @@ static int uacce_mode_set(const char *val, const struct kernel_param *kp) }; MODULE_DEVICE_TABLE(pci, hisi_zip_dev_ids); -static inline void hisi_zip_add_to_list(struct hisi_zip *hisi_zip) +int zip_create_qps(struct hisi_qp **qps, int ctx_num) { - mutex_lock(&hisi_zip_list_lock); - list_add_tail(&hisi_zip->list, &hisi_zip_list); - mutex_unlock(&hisi_zip_list_lock); -} + int node = cpu_to_node(smp_processor_id()); -static inline void hisi_zip_remove_from_list(struct hisi_zip *hisi_zip) -{ - mutex_lock(&hisi_zip_list_lock); - list_del(&hisi_zip->list); - mutex_unlock(&hisi_zip_list_lock); + return hisi_qm_alloc_qps_node(node, &zip_devices, + qps, ctx_num, 0); } -static void hisi_zip_set_user_domain_and_cache(struct hisi_zip *hisi_zip) +static int hisi_zip_set_user_domain_and_cache(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_zip->qm; + void __iomem *base = qm->io_base; /* qm user domain */ - writel(AXUSER_BASE, hisi_zip->qm.io_base + QM_ARUSER_M_CFG_1); - writel(ARUSER_M_CFG_ENABLE, hisi_zip->qm.io_base + - QM_ARUSER_M_CFG_ENABLE); - writel(AXUSER_BASE, hisi_zip->qm.io_base + QM_AWUSER_M_CFG_1); - writel(AWUSER_M_CFG_ENABLE, hisi_zip->qm.io_base + - QM_AWUSER_M_CFG_ENABLE); - writel(WUSER_M_CFG_ENABLE, hisi_zip->qm.io_base + - QM_WUSER_M_CFG_ENABLE); + writel(AXUSER_BASE, base + QM_ARUSER_M_CFG_1); + writel(ARUSER_M_CFG_ENABLE, base + QM_ARUSER_M_CFG_ENABLE); + writel(AXUSER_BASE, base + QM_AWUSER_M_CFG_1); + writel(AWUSER_M_CFG_ENABLE, base + QM_AWUSER_M_CFG_ENABLE); + writel(WUSER_M_CFG_ENABLE, base + QM_WUSER_M_CFG_ENABLE); /* qm cache */ - writel(AXI_M_CFG, hisi_zip->qm.io_base + QM_AXI_M_CFG); - writel(AXI_M_CFG_ENABLE, hisi_zip->qm.io_base + QM_AXI_M_CFG_ENABLE); + writel(AXI_M_CFG, base + QM_AXI_M_CFG); + writel(AXI_M_CFG_ENABLE, base + QM_AXI_M_CFG_ENABLE); + /* disable FLR triggered by BME(bus master enable) */ - writel(PEH_AXUSER_CFG, hisi_zip->qm.io_base + QM_PEH_AXUSER_CFG); - writel(PEH_AXUSER_CFG_ENABLE, hisi_zip->qm.io_base + - QM_PEH_AXUSER_CFG_ENABLE); + writel(PEH_AXUSER_CFG, base + QM_PEH_AXUSER_CFG); + writel(PEH_AXUSER_CFG_ENABLE, base + QM_PEH_AXUSER_CFG_ENABLE); /* cache */ - writel(HZIP_CACHE_ALL_EN, hisi_zip->qm.io_base + HZIP_PORT_ARCA_CHE_0); - writel(HZIP_CACHE_ALL_EN, hisi_zip->qm.io_base + HZIP_PORT_ARCA_CHE_1); - writel(HZIP_CACHE_ALL_EN, hisi_zip->qm.io_base + HZIP_PORT_AWCA_CHE_0); - writel(HZIP_CACHE_ALL_EN, hisi_zip->qm.io_base + HZIP_PORT_AWCA_CHE_1); + writel(HZIP_CACHE_ALL_EN, base + HZIP_PORT_ARCA_CHE_0); + writel(HZIP_CACHE_ALL_EN, base + HZIP_PORT_ARCA_CHE_1); + writel(HZIP_CACHE_ALL_EN, base + HZIP_PORT_AWCA_CHE_0); + writel(HZIP_CACHE_ALL_EN, base + HZIP_PORT_AWCA_CHE_1); /* user domain configurations */ - writel(AXUSER_BASE, hisi_zip->qm.io_base + HZIP_BD_RUSER_32_63); - writel(AXUSER_BASE, hisi_zip->qm.io_base + HZIP_SGL_RUSER_32_63); - writel(AXUSER_BASE, hisi_zip->qm.io_base + HZIP_BD_WUSER_32_63); + writel(AXUSER_BASE, base + HZIP_BD_RUSER_32_63); + writel(AXUSER_BASE, base + HZIP_SGL_RUSER_32_63); + writel(AXUSER_BASE, base + HZIP_BD_WUSER_32_63); if (qm->use_sva) { - writel(AXUSER_BASE | AXUSER_SSV, hisi_zip->qm.io_base + - HZIP_DATA_RUSER_32_63); - writel(AXUSER_BASE | AXUSER_SSV, hisi_zip->qm.io_base + - HZIP_DATA_WUSER_32_63); + writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_RUSER_32_63); + writel(AXUSER_BASE | AXUSER_SSV, base + HZIP_DATA_WUSER_32_63); } else { - writel(AXUSER_BASE, hisi_zip->qm.io_base + - HZIP_DATA_RUSER_32_63); - writel(AXUSER_BASE, hisi_zip->qm.io_base + - HZIP_DATA_WUSER_32_63); + writel(AXUSER_BASE, base + HZIP_DATA_RUSER_32_63); + writel(AXUSER_BASE, base + HZIP_DATA_WUSER_32_63); } /* let's open all compression/decompression cores */ writel(HZIP_DECOMP_CHECK_ENABLE | HZIP_ALL_COMP_DECOMP_EN, - hisi_zip->qm.io_base + HZIP_CLOCK_GATE_CTRL); + base + HZIP_CLOCK_GATE_CTRL); /* enable sqc,cqc writeback */ writel(SQC_CACHE_ENABLE | CQC_CACHE_ENABLE | SQC_CACHE_WB_ENABLE | CQC_CACHE_WB_ENABLE | FIELD_PREP(SQC_CACHE_WB_THRD, 1) | - FIELD_PREP(CQC_CACHE_WB_THRD, 1), - hisi_zip->qm.io_base + QM_CACHE_CTL); + FIELD_PREP(CQC_CACHE_WB_THRD, 1), base + QM_CACHE_CTL); + + return 0; } /* hisi_zip_debug_regs_clear() - clear the zip debug regs */ -static void hisi_zip_debug_regs_clear(struct hisi_zip *hisi_zip) +static void hisi_zip_debug_regs_clear(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_zip->qm; - /* clear current_qm */ writel(0x0, qm->io_base + QM_DFX_MB_CNT_VF); writel(0x0, qm->io_base + QM_DFX_DB_CNT_VF); @@ -442,52 +319,70 @@ static void hisi_zip_debug_regs_clear(struct hisi_zip *hisi_zip) hisi_qm_debug_regs_clear(qm); } - -static void hisi_zip_hw_error_set_state(struct hisi_zip *hisi_zip, bool state) +static int hisi_zip_hw_err_pre_set(struct hisi_qm *qm, u32 *val) { - struct hisi_qm *qm = &hisi_zip->qm; - u32 val; - if (qm->ver == QM_HW_V1) { writel(HZIP_CORE_INT_DISABLE, qm->io_base + HZIP_CORE_INT_MASK); pci_info(qm->pdev, "ZIP v%d cannot support hw error handle!\n", qm->ver); - return; + return -EINVAL; } /* configure error type */ - writel(0x1, hisi_zip->qm.io_base + HZIP_CORE_INT_RAS_CE_ENB); - writel(0x0, hisi_zip->qm.io_base + HZIP_CORE_INT_RAS_FE_ENB); + writel(0x1, qm->io_base + HZIP_CORE_INT_RAS_CE_ENB); + writel(0x0, qm->io_base + HZIP_CORE_INT_RAS_FE_ENB); writel(HZIP_CORE_INT_RAS_NFE_ENABLE, - hisi_zip->qm.io_base + HZIP_CORE_INT_RAS_NFE_ENB); - - val = readl(hisi_zip->qm.io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); - if (state) { - /* clear ZIP hw error source if having */ - writel(HZIP_CORE_INT_DISABLE, hisi_zip->qm.io_base + - HZIP_CORE_INT_SOURCE); - /* enable ZIP hw error interrupts */ - writel(0, hisi_zip->qm.io_base + HZIP_CORE_INT_MASK); - - /* enable ZIP block master OOO when m-bit error occur */ - val = val | HZIP_AXI_SHUTDOWN_ENABLE; - } else { - /* disable ZIP hw error interrupts */ - writel(HZIP_CORE_INT_DISABLE, - hisi_zip->qm.io_base + HZIP_CORE_INT_MASK); + qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB); - /* disable ZIP block master OOO when m-bit error occur */ - val = val & HZIP_AXI_SHUTDOWN_DISABLE; - } + *val = readl(qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); + + return 0; +} + +static void hisi_zip_hw_error_enable(struct hisi_qm *qm) +{ + u32 val; + int ret; + + ret = hisi_zip_hw_err_pre_set(qm, &val); + if (ret) + return; + + /* clear ZIP hw error source if having */ + writel(HZIP_CORE_INT_DISABLE, qm->io_base + HZIP_CORE_INT_SOURCE); + + /* enable ZIP hw error interrupts */ + writel(0, qm->io_base + HZIP_CORE_INT_MASK); + + /* enable ZIP block master OOO when m-bit error occur */ + val = val | HZIP_AXI_SHUTDOWN_ENABLE; - writel(val, hisi_zip->qm.io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); + writel(val, qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); +} + +static void hisi_zip_hw_error_disable(struct hisi_qm *qm) +{ + u32 val; + int ret; + + ret = hisi_zip_hw_err_pre_set(qm, &val); + if (ret) + return; + + /* disable ZIP hw error interrupts */ + writel(HZIP_CORE_INT_DISABLE, qm->io_base + HZIP_CORE_INT_MASK); + + /* disable ZIP block master OOO when m-bit error occur */ + val = val & HZIP_AXI_SHUTDOWN_DISABLE; + + writel(val, qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); } static inline struct hisi_qm *file_to_qm(struct ctrl_debug_file *file) { - struct hisi_zip *hisi_zip = file->ctrl->hisi_zip; + struct hisi_zip *zip = file->ctrl->hisi_zip; - return &hisi_zip->qm; + return &zip->qm; } static u32 current_qm_read(struct ctrl_debug_file *file) @@ -500,22 +395,21 @@ static u32 current_qm_read(struct ctrl_debug_file *file) static int current_qm_write(struct ctrl_debug_file *file, u32 val) { struct hisi_qm *qm = file_to_qm(file); - struct hisi_zip_ctrl *ctrl = file->ctrl; u32 vfq_num; u32 tmp; - if (val > ctrl->num_vfs) + if (val > qm->vfs_num) return -EINVAL; /* According PF or VF Dev ID to calculation curr_qm_qp_num and store */ if (val == 0) { qm->debug.curr_qm_qp_num = qm->qp_num; } else { - vfq_num = (qm->ctrl_q_num - qm->qp_num) / ctrl->num_vfs; - if (val == ctrl->num_vfs) { + vfq_num = (qm->ctrl_q_num - qm->qp_num) / qm->vfs_num; + if (val == qm->vfs_num) { qm->debug.curr_qm_qp_num = qm->ctrl_q_num - qm->qp_num - - (ctrl->num_vfs - 1) * vfq_num; + (qm->vfs_num - 1) * vfq_num; } else { qm->debug.curr_qm_qp_num = vfq_num; } @@ -638,10 +532,8 @@ static ssize_t hisi_zip_ctrl_debug_write(struct file *filp, .write = hisi_zip_ctrl_debug_write, }; -static int hisi_zip_core_debug_init(struct hisi_zip_ctrl *ctrl) +static int hisi_zip_core_debug_init(struct hisi_qm *qm) { - struct hisi_zip *hisi_zip = ctrl->hisi_zip; - struct hisi_qm *qm = &hisi_zip->qm; struct device *dev = &qm->pdev->dev; struct debugfs_regset32 *regset; struct dentry *tmp_d, *tmp; @@ -657,7 +549,7 @@ static int hisi_zip_core_debug_init(struct hisi_zip_ctrl *ctrl) if (ret < 0) return -EINVAL; - tmp_d = debugfs_create_dir(buf, ctrl->debug_root); + tmp_d = debugfs_create_dir(buf, qm->debug.debug_root); if (!tmp_d) return -ENOENT; @@ -677,29 +569,29 @@ static int hisi_zip_core_debug_init(struct hisi_zip_ctrl *ctrl) return 0; } -static int hisi_zip_ctrl_debug_init(struct hisi_zip_ctrl *ctrl) +static int hisi_zip_ctrl_debug_init(struct hisi_qm *qm) { + struct hisi_zip *zip = container_of(qm, struct hisi_zip, qm); struct dentry *tmp; int i; for (i = HZIP_CURRENT_QM; i < HZIP_DEBUG_FILE_NUM; i++) { - spin_lock_init(&ctrl->files[i].lock); - ctrl->files[i].ctrl = ctrl; - ctrl->files[i].index = i; + spin_lock_init(&zip->ctrl->files[i].lock); + zip->ctrl->files[i].ctrl = zip->ctrl; + zip->ctrl->files[i].index = i; tmp = debugfs_create_file(ctrl_debug_file_name[i], 0600, - ctrl->debug_root, ctrl->files + i, + qm->debug.debug_root, zip->ctrl->files + i, &ctrl_debug_fops); if (!tmp) return -ENOENT; } - return hisi_zip_core_debug_init(ctrl); + return hisi_zip_core_debug_init(qm); } -static int hisi_zip_debugfs_init(struct hisi_zip *hisi_zip) +static int hisi_zip_debugfs_init(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_zip->qm; struct device *dev = &qm->pdev->dev; struct dentry *dev_d; int ret; @@ -714,8 +606,7 @@ static int hisi_zip_debugfs_init(struct hisi_zip *hisi_zip) goto failed_to_create; if (qm->fun_type == QM_HW_PF) { - hisi_zip->ctrl->debug_root = dev_d; - ret = hisi_zip_ctrl_debug_init(hisi_zip->ctrl); + ret = hisi_zip_ctrl_debug_init(qm); if (ret) goto failed_to_create; } @@ -727,47 +618,16 @@ static int hisi_zip_debugfs_init(struct hisi_zip *hisi_zip) return ret; } -static void hisi_zip_debugfs_exit(struct hisi_zip *hisi_zip) +static void hisi_zip_debugfs_exit(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_zip->qm; - debugfs_remove_recursive(qm->debug.debug_root); if (qm->fun_type == QM_HW_PF) { - hisi_zip_debug_regs_clear(hisi_zip); + hisi_zip_debug_regs_clear(qm); qm->debug.curr_qm_qp_num = 0; } } -static void hisi_zip_hw_error_init(struct hisi_zip *hisi_zip) -{ - hisi_qm_hw_error_init(&hisi_zip->qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT, 0, - QM_DB_RANDOM_INVALID); - hisi_zip_hw_error_set_state(hisi_zip, true); -} - -static u32 hisi_zip_get_hw_err_status(struct hisi_qm *qm) -{ - return readl(qm->io_base + HZIP_CORE_INT_STATUS); -} - -static void hisi_zip_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) -{ - writel(err_sts, qm->io_base + HZIP_CORE_INT_SOURCE); -} - -static void hisi_zip_set_ecc(struct hisi_qm *qm) -{ - u32 nfe_enb; - - nfe_enb = readl(qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB); - writel(nfe_enb & HZIP_RAS_NFE_MBIT_DISABLE, - qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB); - writel(HZIP_CORE_INT_STATUS_M_ECC, qm->io_base + HZIP_CORE_INT_SET); - qm->err_ini.is_dev_ecc_mbit = 1; -} - static void hisi_zip_log_hw_error(struct hisi_qm *qm, u32 err_sts) { const struct hisi_zip_hw_error *err = zip_hw_error; @@ -792,17 +652,53 @@ static void hisi_zip_log_hw_error(struct hisi_qm *qm, u32 err_sts) } } -static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip) +static u32 hisi_zip_get_hw_err_status(struct hisi_qm *qm) +{ + return readl(qm->io_base + HZIP_CORE_INT_STATUS); +} + +static void hisi_zip_clear_hw_err_status(struct hisi_qm *qm, u32 err_sts) +{ + writel(err_sts, qm->io_base + HZIP_CORE_INT_SOURCE); +} + +static void hisi_zip_open_axi_master_ooo(struct hisi_qm *qm) { - struct hisi_qm *qm = &hisi_zip->qm; + u32 val; + + val = readl(qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); + + writel(val & HZIP_AXI_SHUTDOWN_DISABLE, + qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); + + writel(val | HZIP_AXI_SHUTDOWN_ENABLE, + qm->io_base + HZIP_SOFT_CTRL_ZIP_CONTROL); +} + +static void hisi_zip_close_axi_master_ooo(struct hisi_qm *qm) +{ + u32 nfe_enb; + + nfe_enb = readl(qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB); + writel(nfe_enb & ~HZIP_CORE_INT_STATUS_M_ECC, + qm->io_base + HZIP_CORE_INT_RAS_NFE_ENB); + + writel(HZIP_CORE_INT_STATUS_M_ECC, + qm->io_base + HZIP_CORE_INT_SET); +} + +static int hisi_zip_pf_probe_init(struct hisi_qm *qm) +{ + struct hisi_zip *zip = container_of(qm, struct hisi_zip, qm); struct hisi_zip_ctrl *ctrl; + int ret; ctrl = devm_kzalloc(&qm->pdev->dev, sizeof(*ctrl), GFP_KERNEL); if (!ctrl) return -ENOMEM; - hisi_zip->ctrl = ctrl; - ctrl->hisi_zip = hisi_zip; + zip->ctrl = ctrl; + ctrl->hisi_zip = zip; switch (qm->ver) { case QM_HW_V1: @@ -817,61 +713,71 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip) return -EINVAL; } - qm->err_ini.qm_wr_port = HZIP_WR_MSI_PORT; - qm->err_ini.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; qm->err_ini.get_dev_hw_err_status = hisi_zip_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; + qm->err_ini.err_info.acpi_rst = "ZRST"; + qm->err_ini.hw_err_disable = hisi_zip_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_zip_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_zip_set_user_domain_and_cache; qm->err_ini.log_dev_hw_err = hisi_zip_log_hw_error; - qm->err_ini.inject_dev_hw_err = hisi_zip_set_ecc; + qm->err_ini.open_axi_master_ooo = hisi_zip_open_axi_master_ooo; + qm->err_ini.close_axi_master_ooo = hisi_zip_close_axi_master_ooo; - hisi_zip_set_user_domain_and_cache(hisi_zip); - hisi_zip_hw_error_init(hisi_zip); - hisi_zip_debug_regs_clear(hisi_zip); + qm->err_ini.err_info.msi_wr_port = HZIP_WR_PORT; + + ret = qm->err_ini.set_usr_domain_cache(qm); + if (ret) + return ret; + + hisi_qm_dev_err_init(qm); + + hisi_zip_debug_regs_clear(qm); + + return 0; +} + +static int hisi_zip_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) +{ + int ret; + +#ifdef CONFIG_CRYPTO_QM_UACCE + qm->algs = "zlib\ngzip\nxts(sm4)\nxts(aes)\n"; + qm->uacce_mode = uacce_mode; +#endif + qm->pdev = pdev; + ret = hisi_qm_pre_init(qm, pf_q_num, HZIP_PF_DEF_Q_BASE); + if (ret) + return ret; + qm->sqe_size = HZIP_SQE_SIZE; + qm->dev_name = hisi_zip_name; + qm->qm_list = &zip_devices; return 0; } static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) { - struct hisi_zip *hisi_zip; - enum qm_hw_ver rev_id; + struct hisi_zip *zip; struct hisi_qm *qm; int ret; - rev_id = hisi_qm_get_hw_version(pdev); - if (rev_id == QM_HW_UNKNOWN) - return -EINVAL; - - hisi_zip = devm_kzalloc(&pdev->dev, sizeof(*hisi_zip), GFP_KERNEL); - if (!hisi_zip) + zip = devm_kzalloc(&pdev->dev, sizeof(*zip), GFP_KERNEL); + if (!zip) return -ENOMEM; - pci_set_drvdata(pdev, hisi_zip); - - hisi_zip_add_to_list(hisi_zip); + qm = &zip->qm; + qm->fun_type = pdev->is_physfn ? QM_HW_PF : QM_HW_VF; - hisi_zip->status = 0; - qm = &hisi_zip->qm; - qm->pdev = pdev; - qm->ver = rev_id; + ret = hisi_zip_qm_pre_init(qm, pdev); + if (ret) + return ret; - qm->sqe_size = HZIP_SQE_SIZE; - qm->dev_name = hisi_zip_name; - qm->fun_type = (pdev->device == PCI_DEVICE_ID_ZIP_PF) ? QM_HW_PF : - QM_HW_VF; - qm->algs = "zlib\ngzip\nxts(sm4)\nxts(aes)\n"; - - switch (uacce_mode) { - case UACCE_MODE_NOUACCE: - qm->use_uacce = false; - break; - case UACCE_MODE_NOIOMMU: - qm->use_uacce = true; - break; - default: - ret = -EINVAL; - goto err_remove_from_list; - } + hisi_qm_add_to_list(qm, &zip_devices); ret = hisi_qm_init(qm); if (ret) { @@ -880,15 +786,11 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) } if (qm->fun_type == QM_HW_PF) { - ret = hisi_zip_pf_probe_init(hisi_zip); + ret = hisi_zip_pf_probe_init(qm); if (ret) { pci_err(pdev, "Failed to init pf probe (%d)!\n", ret); goto err_remove_from_list; } - - qm->qp_base = HZIP_PF_DEF_Q_BASE; - qm->qp_num = pf_q_num; - qm->debug.curr_qm_qp_num = pf_q_num; } else if (qm->fun_type == QM_HW_VF) { /* * have no way to get qm configure in VM in v1 hardware, @@ -914,7 +816,7 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) goto err_qm_uninit; } - ret = hisi_zip_debugfs_init(hisi_zip); + ret = hisi_zip_debugfs_init(qm); if (ret) pci_err(pdev, "Failed to init debugfs (%d)!\n", ret); @@ -923,630 +825,62 @@ static int hisi_zip_probe(struct pci_dev *pdev, const struct pci_device_id *id) pci_err(pdev, "Failed to register driver to crypto!\n"); goto err_qm_stop; } + + if (qm->fun_type == QM_HW_PF && vfs_num > 0) { + ret = hisi_qm_sriov_enable(pdev, vfs_num); + if (ret < 0) + goto err_crypto_unregister; + } + return 0; +err_crypto_unregister: + hisi_zip_unregister_from_crypto(); err_qm_stop: - hisi_zip_debugfs_exit(hisi_zip); + hisi_zip_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); err_qm_uninit: hisi_qm_uninit(qm); err_remove_from_list: - hisi_zip_remove_from_list(hisi_zip); - return ret; -} - -/* now we only support equal assignment */ -static int hisi_zip_vf_q_assign(struct hisi_zip *hisi_zip, u32 num_vfs) -{ - struct hisi_qm *qm = &hisi_zip->qm; - u32 qp_num = qm->qp_num; - u32 q_base = qp_num; - u32 q_num, remain_q_num, i; - int ret; - - if (!num_vfs) - return -EINVAL; - - remain_q_num = qm->ctrl_q_num - qp_num; - /* If remain queues not enough, return error. */ - if (remain_q_num < num_vfs) - return -EINVAL; - - q_num = remain_q_num / num_vfs; - for (i = 1; i <= num_vfs; i++) { - if (i == num_vfs) - q_num += remain_q_num % num_vfs; - ret = hisi_qm_set_vft(qm, i, q_base, q_num); - if (ret) - return ret; - q_base += q_num; - } - - return 0; -} - -static int hisi_zip_clear_vft_config(struct hisi_zip *hisi_zip) -{ - struct hisi_zip_ctrl *ctrl = hisi_zip->ctrl; - struct hisi_qm *qm = &hisi_zip->qm; - u32 i, num_vfs = ctrl->num_vfs; - int ret; - - for (i = 1; i <= num_vfs; i++) { - ret = hisi_qm_set_vft(qm, i, 0, 0); - if (ret) - return ret; - } - - ctrl->num_vfs = 0; - - return 0; -} - -static int hisi_zip_sriov_enable(struct pci_dev *pdev, int max_vfs) -{ -#ifdef CONFIG_PCI_IOV - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - int pre_existing_vfs, num_vfs, ret; - - pre_existing_vfs = pci_num_vf(pdev); - if (pre_existing_vfs) { - dev_err(&pdev->dev, - "Can't enable VF. Please disable pre-enabled VFs!\n"); - return 0; - } - - num_vfs = min_t(int, max_vfs, HZIP_VF_NUM); - - ret = hisi_zip_vf_q_assign(hisi_zip, num_vfs); - if (ret) { - dev_err(&pdev->dev, "Can't assign queues for VF!\n"); - return ret; - } - - hisi_zip->ctrl->num_vfs = num_vfs; - - ret = pci_enable_sriov(pdev, num_vfs); - if (ret) { - dev_err(&pdev->dev, "Can't enable VF!\n"); - hisi_zip_clear_vft_config(hisi_zip); - return ret; - } - - return num_vfs; -#else - return 0; -#endif -} - -static int hisi_zip_try_frozen_vfs(struct pci_dev *pdev) -{ - struct hisi_zip *zip, *vf_zip; - struct pci_dev *dev; - int ret = 0; - - /* Try to frozen all the VFs as disable SRIOV */ - mutex_lock(&hisi_zip_list_lock); - list_for_each_entry(zip, &hisi_zip_list, list) { - dev = zip->qm.pdev; - if (dev == pdev) - continue; - if (pci_physfn(dev) == pdev) { - vf_zip = pci_get_drvdata(dev); - ret = hisi_qm_frozen(&vf_zip->qm); - if (ret) - goto frozen_fail; - } - } - -frozen_fail: - mutex_unlock(&hisi_zip_list_lock); + hisi_qm_del_from_list(qm, &zip_devices); return ret; } -static int hisi_zip_sriov_disable(struct pci_dev *pdev) -{ - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - - if (pci_vfs_assigned(pdev)) { - dev_err(&pdev->dev, - "Can't disable VFs while VFs are assigned!\n"); - return -EPERM; - } - - if (hisi_zip_try_frozen_vfs(pdev)) { - dev_err(&pdev->dev, "try frozen VFs failed!\n"); - return -EBUSY; - } - - /* remove in hisi_zip_pci_driver will be called to free VF resources */ - pci_disable_sriov(pdev); - - return hisi_zip_clear_vft_config(hisi_zip); -} - static int hisi_zip_sriov_configure(struct pci_dev *pdev, int num_vfs) { if (num_vfs == 0) - return hisi_zip_sriov_disable(pdev); + return hisi_qm_sriov_disable(pdev, &zip_devices); else - return hisi_zip_sriov_enable(pdev, num_vfs); -} - -static void hisi_zip_remove_wait_delay(struct hisi_zip *hisi_zip) -{ - struct hisi_qm *qm = &hisi_zip->qm; - - while (hisi_qm_frozen(qm) || ((qm->fun_type == QM_HW_PF) && - hisi_zip_try_frozen_vfs(qm->pdev))) - usleep_range(FROZEN_RANGE_MIN, FROZEN_RANGE_MAX); - - udelay(ZIP_WAIT_DELAY); + return hisi_qm_sriov_enable(pdev, num_vfs); } static void hisi_zip_remove(struct pci_dev *pdev) { - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_zip->qm; + struct hisi_qm *qm = pci_get_drvdata(pdev); if (uacce_mode != UACCE_MODE_NOUACCE) - hisi_zip_remove_wait_delay(hisi_zip); + hisi_qm_remove_wait_delay(qm, &zip_devices); - if (qm->fun_type == QM_HW_PF && hisi_zip->ctrl->num_vfs != 0) - (void)hisi_zip_sriov_disable(pdev); + if (qm->fun_type == QM_HW_PF && qm->vfs_num) + hisi_qm_sriov_disable(pdev, NULL); hisi_zip_unregister_from_crypto(); - hisi_zip_debugfs_exit(hisi_zip); + + hisi_zip_debugfs_exit(qm); hisi_qm_stop(qm, QM_NORMAL); if (qm->fun_type == QM_HW_PF) - hisi_zip_hw_error_set_state(hisi_zip, false); + hisi_qm_dev_err_uninit(qm); hisi_qm_uninit(qm); - hisi_zip_remove_from_list(hisi_zip); -} - -static void hisi_zip_shutdown(struct pci_dev *pdev) -{ - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - - hisi_qm_stop(&hisi_zip->qm, QM_NORMAL); -} - -static pci_ers_result_t hisi_zip_error_detected(struct pci_dev *pdev, - pci_channel_state_t state) -{ - if (pdev->is_virtfn) - return PCI_ERS_RESULT_NONE; - - dev_info(&pdev->dev, "PCI error detected, state(=%d)!!\n", state); - if (state == pci_channel_io_perm_failure) - return PCI_ERS_RESULT_DISCONNECT; - - return hisi_qm_process_dev_error(pdev); -} - -static int hisi_zip_reset_prepare_ready(struct hisi_zip *hisi_zip) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct hisi_zip *zip = pci_get_drvdata(pci_physfn(pdev)); - int delay = 0; - - while (test_and_set_bit(HISI_ZIP_RESET, &zip->status)) { - msleep(++delay); - if (delay > HZIP_RESET_WAIT_TIMEOUT) - return -EBUSY; - } - - return 0; -} - -static int hisi_zip_vf_reset_prepare(struct hisi_zip *hisi_zip, - enum qm_stop_reason stop_reason) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct pci_dev *dev; - struct hisi_qm *qm; - int ret = 0; - - mutex_lock(&hisi_zip_list_lock); - if (pdev->is_physfn) { - list_for_each_entry(hisi_zip, &hisi_zip_list, list) { - dev = hisi_zip->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hisi_zip->qm; - - ret = hisi_qm_stop(qm, stop_reason); - if (ret) - goto prepare_fail; - } - } - } - -prepare_fail: - mutex_unlock(&hisi_zip_list_lock); - return ret; -} - -static int hisi_zip_controller_reset_prepare(struct hisi_zip *hisi_zip) -{ - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &qm->pdev->dev; - int ret; - - ret = hisi_zip_reset_prepare_ready(hisi_zip); - if (ret) { - dev_err(dev, "Controller reset not ready!\n"); - return ret; - } - - ret = hisi_zip_vf_reset_prepare(hisi_zip, QM_SOFT_RESET); - if (ret) { - dev_err(dev, "Fails to stop VFs!\n"); - return ret; - } - - ret = hisi_qm_stop(qm, QM_SOFT_RESET); - if (ret) { - dev_err(dev, "Fails to stop QM!\n"); - return ret; - } - -#ifdef CONFIG_CRYPTO_QM_UACCE - if (qm->use_uacce) { - ret = uacce_hw_err_isolate(&qm->uacce); - if (ret) { - dev_err(dev, "Fails to isolate hw err!\n"); - return ret; - } - } -#endif - - return 0; -} - -static int hisi_zip_soft_reset(struct hisi_zip *hisi_zip) -{ - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &qm->pdev->dev; - unsigned long long value; - int ret; - u32 val; - - ret = hisi_qm_reg_test(qm); - if (ret) - return ret; - - ret = hisi_qm_set_vf_mse(qm, HZIP_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable vf mse bit.\n"); - return ret; - } - - ret = hisi_qm_set_msi(qm, HZIP_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable peh msi bit.\n"); - return ret; - } - - /* Set qm ecc if dev ecc happened to hold on ooo */ - hisi_qm_set_ecc(qm); - - /* OOO register set and check */ - writel(HZIP_MASTER_GLOBAL_CTRL_SHUTDOWN, - hisi_zip->qm.io_base + HZIP_MASTER_GLOBAL_CTRL); - - /* If bus lock, reset chip */ - ret = readl_relaxed_poll_timeout(hisi_zip->qm.io_base + - HZIP_MASTER_TRANS_RETURN, val, - (val == HZIP_MASTER_TRANS_RETURN_RW), - HZIP_REG_RD_INTVRL_US, - HZIP_REG_RD_TMOUT_US); - if (ret) { - dev_emerg(dev, "Bus lock! Please reset system.\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, HZIP_DISABLE); - if (ret) { - dev_err(dev, "Fails to disable pf mse bit.\n"); - return ret; - } - - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(dev)) { - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(dev), "ZRST", - NULL, &value); - if (ACPI_FAILURE(s)) { - dev_err(dev, "NO controller reset method!\n"); - return -EIO; - } - - if (value) { - dev_err(dev, "Reset step %llu failed!\n", value); - return -EIO; - } - } else { - dev_err(dev, "No reset method!\n"); - return -EINVAL; - } - - return 0; -} - -static int hisi_zip_vf_reset_done(struct hisi_zip *hisi_zip) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct pci_dev *dev; - struct hisi_qm *qm; - int ret = 0; - - mutex_lock(&hisi_zip_list_lock); - list_for_each_entry(hisi_zip, &hisi_zip_list, list) { - dev = hisi_zip->qm.pdev; - if (dev == pdev) - continue; - - if (pci_physfn(dev) == pdev) { - qm = &hisi_zip->qm; - - ret = hisi_qm_restart(qm); - if (ret) - goto reset_fail; - } - } - -reset_fail: - mutex_unlock(&hisi_zip_list_lock); - return ret; -} - -static int hisi_zip_controller_reset_done(struct hisi_zip *hisi_zip) -{ - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &qm->pdev->dev; - int ret; - - ret = hisi_qm_set_msi(qm, HZIP_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable peh msi bit!\n"); - return ret; - } - - ret = hisi_qm_set_pf_mse(qm, HZIP_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable pf mse bit!\n"); - return ret; - } - - ret = hisi_qm_set_vf_mse(qm, HZIP_ENABLE); - if (ret) { - dev_err(dev, "Fails to enable vf mse bit!\n"); - return ret; - } - - hisi_zip_set_user_domain_and_cache(hisi_zip); - hisi_qm_restart_prepare(qm); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - return -EPERM; - } - - if (hisi_zip->ctrl->num_vfs) { - ret = hisi_zip_vf_q_assign(hisi_zip, hisi_zip->ctrl->num_vfs); - if (ret) { - dev_err(dev, "Failed to assign vf queues!\n"); - return ret; - } - } - - ret = hisi_zip_vf_reset_done(hisi_zip); - if (ret) { - dev_err(dev, "Failed to start VFs!\n"); - return -EPERM; - } - - hisi_qm_restart_done(qm); - hisi_zip_hw_error_init(hisi_zip); - - return 0; -} - -static int hisi_zip_controller_reset(struct hisi_zip *hisi_zip) -{ - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &qm->pdev->dev; - int ret; - - dev_info(dev, "Controller resetting...\n"); - - ret = hisi_zip_controller_reset_prepare(hisi_zip); - if (ret) - return ret; - - ret = hisi_zip_soft_reset(hisi_zip); - if (ret) { - dev_err(dev, "Controller reset failed (%d)\n", ret); - return ret; - } - - ret = hisi_zip_controller_reset_done(hisi_zip); - if (ret) - return ret; - - clear_bit(HISI_ZIP_RESET, &hisi_zip->status); - - dev_info(dev, "Controller reset complete\n"); - - return ret; -} - -static pci_ers_result_t hisi_zip_slot_reset(struct pci_dev *pdev) -{ - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - int ret; - - if (pdev->is_virtfn) - return PCI_ERS_RESULT_RECOVERED; - - dev_info(&pdev->dev, "Requesting reset due to PCI error\n"); - - pci_cleanup_aer_uncorrect_error_status(pdev); - - ret = hisi_zip_controller_reset(hisi_zip); - if (ret) { - dev_err(&pdev->dev, "hisi_zip controller reset failed (%d)\n", - ret); - return PCI_ERS_RESULT_DISCONNECT; - } - - return PCI_ERS_RESULT_RECOVERED; -} - -static void hisi_zip_set_hw_error(struct hisi_zip *hisi_zip, bool state) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct hisi_zip *zip = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &zip->qm; - - if (qm->fun_type == QM_HW_VF) - return; - - if (state) - hisi_qm_hw_error_init(qm, QM_BASE_CE, - QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT, - 0, QM_DB_RANDOM_INVALID); - else - hisi_qm_hw_error_uninit(qm); - - hisi_zip_hw_error_set_state(zip, state); -} - -static int hisi_zip_get_hw_error_status(struct hisi_zip *hisi_zip) -{ - u32 err_sts; - - err_sts = readl(hisi_zip->qm.io_base + HZIP_CORE_INT_STATUS) & - HZIP_CORE_INT_STATUS_M_ECC; - if (err_sts) - return err_sts; - - return 0; -} - -static int hisi_zip_check_hw_error(struct hisi_zip *hisi_zip) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct hisi_zip *zip = pci_get_drvdata(pci_physfn(pdev)); - struct hisi_qm *qm = &zip->qm; - int ret; - - if (qm->fun_type == QM_HW_VF) - return 0; - - ret = hisi_qm_get_hw_error_status(qm); - if (ret) - return ret; - - return hisi_zip_get_hw_error_status(zip); -} - -static void hisi_zip_reset_prepare(struct pci_dev *pdev) -{ - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &pdev->dev; - u32 delay = 0; - int ret; - - hisi_zip_set_hw_error(hisi_zip, HZIP_HW_ERROR_IRQ_DISABLE); - - while (hisi_zip_check_hw_error(hisi_zip)) { - msleep(++delay); - if (delay > HZIP_RESET_WAIT_TIMEOUT) - return; - } - - ret = hisi_zip_reset_prepare_ready(hisi_zip); - if (ret) { - dev_err(dev, "FLR not ready!\n"); - return; - } - - ret = hisi_zip_vf_reset_prepare(hisi_zip, QM_FLR); - if (ret) { - dev_err(dev, "Fails to prepare reset!\n"); - return; - } - - ret = hisi_qm_stop(qm, QM_FLR); - if (ret) { - dev_err(dev, "Fails to stop QM!\n"); - return; - } - - dev_info(dev, "FLR resetting...\n"); -} - -static void hisi_zip_flr_reset_complete(struct hisi_zip *hisi_zip) -{ - struct pci_dev *pdev = hisi_zip->qm.pdev; - struct hisi_zip *zip = pci_get_drvdata(pci_physfn(pdev)); - struct device *dev = &zip->qm.pdev->dev; - u32 id; - - pci_read_config_dword(zip->qm.pdev, PCI_COMMAND, &id); - if (id == HZIP_PCI_COMMAND_INVALID) - dev_err(dev, "Device can not be used!\n"); - - clear_bit(HISI_ZIP_RESET, &zip->status); -} - -static void hisi_zip_reset_done(struct pci_dev *pdev) -{ - struct hisi_zip *hisi_zip = pci_get_drvdata(pdev); - struct hisi_qm *qm = &hisi_zip->qm; - struct device *dev = &pdev->dev; - int ret; - - hisi_zip_set_hw_error(hisi_zip, HZIP_HW_ERROR_IRQ_ENABLE); - - ret = hisi_qm_restart(qm); - if (ret) { - dev_err(dev, "Failed to start QM!\n"); - goto flr_done; - } - - if (pdev->is_physfn) { - hisi_zip_set_user_domain_and_cache(hisi_zip); - if (hisi_zip->ctrl->num_vfs) - hisi_zip_vf_q_assign(hisi_zip, - hisi_zip->ctrl->num_vfs); - ret = hisi_zip_vf_reset_done(hisi_zip); - if (ret) { - dev_err(dev, "Failed to start VFs!\n"); - goto flr_done; - } - } - -flr_done: - hisi_zip_flr_reset_complete(hisi_zip); - - dev_info(dev, "FLR reset complete\n"); + hisi_qm_del_from_list(qm, &zip_devices); } static const struct pci_error_handlers hisi_zip_err_handler = { - .error_detected = hisi_zip_error_detected, - .slot_reset = hisi_zip_slot_reset, - .reset_prepare = hisi_zip_reset_prepare, - .reset_done = hisi_zip_reset_done, + .error_detected = hisi_qm_dev_err_detected, + .slot_reset = hisi_qm_dev_slot_reset, + .reset_prepare = hisi_qm_reset_prepare, + .reset_done = hisi_qm_reset_done, }; static struct pci_driver hisi_zip_pci_driver = { @@ -1556,7 +890,7 @@ static void hisi_zip_reset_done(struct pci_dev *pdev) .remove = hisi_zip_remove, .sriov_configure = hisi_zip_sriov_configure, .err_handler = &hisi_zip_err_handler, - .shutdown = hisi_zip_shutdown, + .shutdown = hisi_qm_dev_shutdown, }; static void hisi_zip_register_debugfs(void) @@ -1578,6 +912,10 @@ static int __init hisi_zip_init(void) { int ret; + INIT_LIST_HEAD(&zip_devices.list); + mutex_init(&zip_devices.lock); + zip_devices.check = NULL; + hisi_zip_register_debugfs(); ret = pci_register_driver(&hisi_zip_pci_driver); -- 1.8.3

1 0

[PATCH 01/18] iommu/vt-d: Introduce is_downstream_to_pci_bridge helper
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Eric Auger <eric.auger(a)redhat.com> mainline inclusion from mainline-5.3 commit b9a7f9816483b193 category: bugfix bugzilla: 17401 CVE: NA ------------------------------------------------- Several call sites are about to check whether a device belongs to the PCI sub-hierarchy of a candidate PCI-PCI bridge. Introduce an helper to perform that check. Signed-off-by: Eric Auger <eric.auger(a)redhat.com> Reviewed-by: Lu Baolu <baolu.lu(a)linux.intel.com> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/intel-iommu.c | 37 +++++++++++++++++++++++++++++-------- 1 file changed, 29 insertions(+), 8 deletions(-) diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c index f6d7955..2f52ea8 100644 --- a/drivers/iommu/intel-iommu.c +++ b/drivers/iommu/intel-iommu.c @@ -826,12 +826,39 @@ static int iommu_dummy(struct device *dev) return dev->archdata.iommu == DUMMY_DEVICE_DOMAIN_INFO; } +/** + * is_downstream_to_pci_bridge - test if a device belongs to the PCI + * sub-hierarchy of a candidate PCI-PCI bridge + * @dev: candidate PCI device belonging to @bridge PCI sub-hierarchy + * @bridge: the candidate PCI-PCI bridge + * + * Return: true if @dev belongs to @bridge PCI sub-hierarchy, else false. + */ +static bool +is_downstream_to_pci_bridge(struct device *dev, struct device *bridge) +{ + struct pci_dev *pdev, *pbridge; + + if (!dev_is_pci(dev) || !dev_is_pci(bridge)) + return false; + + pdev = to_pci_dev(dev); + pbridge = to_pci_dev(bridge); + + if (pbridge->subordinate && + pbridge->subordinate->number <= pdev->bus->number && + pbridge->subordinate->busn_res.end >= pdev->bus->number) + return true; + + return false; +} + static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devfn) { struct dmar_drhd_unit *drhd = NULL; struct intel_iommu *iommu; struct device *tmp; - struct pci_dev *ptmp, *pdev = NULL; + struct pci_dev *pdev = NULL; u16 segment = 0; int i; @@ -877,13 +904,7 @@ static struct intel_iommu *device_to_iommu(struct device *dev, u8 *bus, u8 *devf goto out; } - if (!pdev || !dev_is_pci(tmp)) - continue; - - ptmp = to_pci_dev(tmp); - if (ptmp->subordinate && - ptmp->subordinate->number <= pdev->bus->number && - ptmp->subordinate->busn_res.end >= pdev->bus->number) + if (is_downstream_to_pci_bridge(dev, tmp)) goto got_pdev; } -- 1.8.3

1 17

[PATCH 1/3] drivers : sfc cleancode
by Yang Yingliang 16 Apr '20

16 Apr '20

From: fengsheng <fengsheng5(a)huawei.com> driver inclusion category: cleanup bugzilla: NA CVE: NA 1. sfc cleancode Signed-off-by: fengsheng <fengsheng5(a)huawei.com> Reviewed-by: zhangmu <zhangmu1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mtd/hisilicon/sfc/hrd_common.h | 54 +++++++++++++-------------- drivers/mtd/hisilicon/sfc/hrd_sfc_driver.c | 4 +- drivers/mtd/hisilicon/sfc/hrd_sflash_core.c | 12 ++---- drivers/mtd/hisilicon/sfc/hrd_sflash_core.h | 2 + drivers/mtd/hisilicon/sfc/hrd_sflash_driver.h | 6 +-- drivers/mtd/hisilicon/sfc/hrd_sflash_hal.c | 5 +-- drivers/mtd/hisilicon/sfc/hrd_sflash_hal.h | 1 + drivers/mtd/hisilicon/sfc/hrd_sflash_spec.h | 4 +- 8 files changed, 42 insertions(+), 46 deletions(-) diff --git a/drivers/mtd/hisilicon/sfc/hrd_common.h b/drivers/mtd/hisilicon/sfc/hrd_common.h index d36a7a3..71dcaa9 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_common.h +++ b/drivers/mtd/hisilicon/sfc/hrd_common.h @@ -40,39 +40,39 @@ #define HRD_COMMON_ERR_RES_NOT_EXIST (int)(HRD_COMMON_ERR_BASE - 13) /* 16 bit nibble swap. example 0x1234 -> 0x2143 */ -#define HRD_NIBBLE_SWAP_16BIT(X) ((((X)&0xf) << 4) | \ - (((X)&0xF0) >> 4) | \ - (((X)&0xF00) << 4) | \ - (((X)&0xF000) >> 4)) +#define HRD_NIBBLE_SWAP_16BIT(X) ((((X) & 0xf) << 4) | \ + (((X) & 0xF0) >> 4) | \ + (((X) & 0xF00) << 4) | \ + (((X) & 0xF000) >> 4)) /* 32 bit nibble swap. example 0x12345678 -> 0x21436587 */ -#define HRD_NIBBLE_SWAP_32BIT(X) (((X&0xF) << 4) | \ - (((X)&0xF0) >> 4) | \ - (((X)&0xF00) << 4) | \ - (((X)&0xF000) >> 4) | \ - (((X)&0xF0000) << 4) | \ - (((X)&0xF00000) >> 4) | \ - (((X)&0xF000000) << 4) | \ - (((X)&0xF0000000) >> 4)) +#define HRD_NIBBLE_SWAP_32BIT(X) ((((X) & 0xF) << 4) | \ + (((X) & 0xF0) >> 4) | \ + (((X) & 0xF00) << 4) | \ + (((X) & 0xF000) >> 4) | \ + (((X) & 0xF0000) << 4) | \ + (((X) & 0xF00000) >> 4) | \ + (((X) & 0xF000000) << 4) | \ + (((X) & 0xF0000000) >> 4)) /* 16 bit byte swap. example 0x1234->0x3412 */ -#define HRD_BYTE_SWAP_16BIT(X) ((((X)&0xFF)<<8) | (((X)&0xFF00)>>8)) +#define HRD_BYTE_SWAP_16BIT(X) ((((X) & 0xFF) << 8) | (((X) & 0xFF00) >> 8)) /* 32 bit byte swap. example 0x12345678->0x78563412 */ -#define HRD_BYTE_SWAP_32BIT(X) ((((X)&0xFF)<<24) | \ - (((X)&0xFF00)<<8) | \ - (((X)&0xFF0000)>>8) | \ - (((X)&0xFF000000)>>24)) +#define HRD_BYTE_SWAP_32BIT(X) ((((X) & 0xFF) << 24) | \ + (((X) & 0xFF00) << 8) | \ + (((X) & 0xFF0000) >> 8) | \ + (((X) & 0xFF000000) >> 24)) /* 64 bit byte swap. example 0x11223344.55667788 -> 0x88776655.44332211 */ -#define HRD_BYTE_SWAP_64BIT(X) ((l64) ((((X)&0xFFULL)<<56) | \ - (((X)&0xFF00ULL)<<40) | \ - (((X)&0xFF0000ULL)<<24) | \ - (((X)&0xFF000000ULL)<<8) | \ - (((X)&0xFF00000000ULL)>>8) | \ - (((X)&0xFF0000000000ULL)>>24) | \ - (((X)&0xFF000000000000ULL)>>40) | \ - (((X)&0xFF00000000000000ULL)>>56))) +#define HRD_BYTE_SWAP_64BIT(X) ((l64) ((((X) & 0xFFULL) << 56) | \ + (((X) & 0xFF00ULL) << 40) | \ + (((X) & 0xFF0000ULL) << 24) | \ + (((X) & 0xFF000000ULL) << 8) | \ + (((X) & 0xFF00000000ULL) >> 8) | \ + (((X) & 0xFF0000000000ULL) >> 24) | \ + (((X) & 0xFF000000000000ULL) >> 40) | \ + (((X) & 0xFF00000000000000ULL) >> 56))) /* -- Endianess macros. */ #ifdef HRD_ENDNESS_BIGEND @@ -91,10 +91,8 @@ #define HRD_64BIT_BE(X) HRD_BYTE_SWAP_64BIT(X) #endif -#define VOID void - #ifndef NULL -#define NULL ((VOID *)0) +#define NULL ((void *)0) #endif #define MTD_FLASH_MAP_DEBUG diff --git a/drivers/mtd/hisilicon/sfc/hrd_sfc_driver.c b/drivers/mtd/hisilicon/sfc/hrd_sfc_driver.c index 6a10106..8935263 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sfc_driver.c +++ b/drivers/mtd/hisilicon/sfc/hrd_sfc_driver.c @@ -26,9 +26,9 @@ #include "hrd_common.h" #include "hrd_sflash_driver.h" -#define SFC_DRIVER_VERSION "1.8.15.0" +#define SFC_DRIVER_VERSION "1.9.39.0" -static const char *g_sflashMtdList[] = { "sflash", NULL }; +static const char *g_sflashMtdList[] = {"sflash", NULL}; static unsigned int hrd_flash_info_fill(struct maps_init_info *maps, struct resource *flash_iores, struct platform_device *pdev) diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_core.c b/drivers/mtd/hisilicon/sfc/hrd_sflash_core.c index 7341f9e..68547d8 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_core.c +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_core.c @@ -28,7 +28,6 @@ #include <linux/signal.h> #include <linux/types.h> #include "hrd_common.h" -#include "hrd_sflash_driver.h" #include "hrd_sflash_spec.h" #include "hrd_sflash_core.h" @@ -205,7 +204,6 @@ s32 SFC_ClearStatus(struct SFC_SFLASH_INFO *sflash) (void)SFC_ClearInt(sflash->sfc_reg_base); if (sflash->manufacturerId == HISI_SPANSION_MANF_ID) { - /* 30 for spansion , clear status */ SFC_RegisterWrite(sflash->sfc_reg_base + CMD_INS, 0x30); @@ -234,7 +232,6 @@ void SFC_CheckErr(struct SFC_SFLASH_INFO *sflash) unsigned long delay_us = 50; /* delay 50us */ if (sflash->manufacturerId == HISI_SPANSION_MANF_ID) { - ulRegValue = SFC_ReadStatus(sflash); if (ulRegValue == WAIT_TIME_OUT) { pr_err("[SFC] [%s %d]: SFC_ReadStatus time out\n", @@ -362,7 +359,7 @@ s32 SFC_RegWordAlignRead(struct SFC_SFLASH_INFO *sflash, u32 ulRegValue; s32 ulRet; - if (!ulReadLen || ulReadLen > SFC_HARD_BUF_LEN || (ulReadLen&0x3)) { + if (!ulReadLen || ulReadLen > SFC_HARD_BUF_LEN || (ulReadLen & 0x3)) { pr_err("[SFC] [%s %d]: len=%u err\n", __func__, __LINE__, ulReadLen); return HRD_ERR; } @@ -379,7 +376,7 @@ s32 SFC_RegWordAlignRead(struct SFC_SFLASH_INFO *sflash, ulRegValue = SFC_RegisterRead(sflash->sfc_reg_base + CMD_CONFIG); ulRegValue &= (~(0xff << DATA_CNT) & (~(1 << SEL_CS))); ulRegValue |= - ((ulReadLen-1) << DATA_CNT) | (1 << ADDR_EN) | (1 << DATA_EN) | (1 << RW_DATA) + ((ulReadLen - 1) << DATA_CNT) | (1 << ADDR_EN) | (1 << DATA_EN) | (1 << RW_DATA) | (SFC_CHIP_CS << SEL_CS) | (0x1 << START); wmb(); @@ -398,7 +395,6 @@ s32 SFC_RegWordAlignRead(struct SFC_SFLASH_INFO *sflash, pulData[i] = SFC_RegisterRead(sflash->sfc_reg_base + DATABUFFER1 + (u32)(0x4 * i)); return ulRet; - } s32 SFC_RegByteRead(struct SFC_SFLASH_INFO *sflash, @@ -448,7 +444,7 @@ s32 SFC_RegWordAlignWrite(struct SFC_SFLASH_INFO *sflash, s32 ulRet; ulRet = SFC_WriteEnable(sflash); - if (!ulWriteLen || ulWriteLen > SFC_HARD_BUF_LEN || (ulWriteLen&0x3)) { + if ((!ulWriteLen) || (ulWriteLen > SFC_HARD_BUF_LEN) || (ulWriteLen & 0x3)) { pr_err("[SFC] [%s %d]: len=%u err\n", __func__, __LINE__, ulWriteLen); ulRet = HRD_ERR; goto rel; @@ -471,7 +467,7 @@ s32 SFC_RegWordAlignWrite(struct SFC_SFLASH_INFO *sflash, ulRegValue = SFC_RegisterRead(sflash->sfc_reg_base + CMD_CONFIG); ulRegValue &= (~(0xff << DATA_CNT)) & (~(1 << RW_DATA) & (~(1 << SEL_CS))); - ulRegValue |= ((ulWriteLen-1) << DATA_CNT) | (1 << ADDR_EN) | (1 << DATA_EN) + ulRegValue |= ((ulWriteLen - 1) << DATA_CNT) | (1 << ADDR_EN) | (1 << DATA_EN) | (SFC_CHIP_CS << SEL_CS) | (0x1 << START); wmb(); diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_core.h b/drivers/mtd/hisilicon/sfc/hrd_sflash_core.h index 9002c3e..56c4417 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_core.h +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_core.h @@ -17,6 +17,8 @@ #ifndef __HRD_SFLASH_CORE_H__ #define __HRD_SFLASH_CORE_H__ +#include "hrd_sflash_driver.h" + #define SFC_HARD_BUF_LEN (256) #define SPI_CMD_SR_WIP 1 /* Write in Progress bit in status register position */ diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_driver.h b/drivers/mtd/hisilicon/sfc/hrd_sflash_driver.h index 3494787..f659758 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_driver.h +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_driver.h @@ -14,8 +14,8 @@ * */ -#ifndef _HRD_SLASH_DRIVER_H -#define _HRD_SLASH_DRIVER_H +#ifndef _HRD_SFLASH_DRIVER_H +#define _HRD_SFLASH_DRIVER_H #include <linux/mtd/map.h> @@ -102,4 +102,4 @@ struct SFC_SFLASH_INFO { extern struct mtd_info *sflash_probe(struct map_info *map, struct resource *sfc_regres); extern void sflash_destroy(struct mtd_info *mtd); -#endif /* _HRD_SLASH_DRIVER_H */ +#endif /* _HRD_SLASH_DRIVER_H */ diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.c b/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.c index 8f5b387..ec9887a7 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.c +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.c @@ -700,7 +700,6 @@ s32 SFC_BlockErase(struct SFC_SFLASH_INFO *sflash, u32 ulAddr, u32 ErCmd) rel: SFC_FlashUnlock(sflash); return ulRet; - } static s32 _SFC_RegModeWrite(struct SFC_SFLASH_INFO *sflash, @@ -727,7 +726,7 @@ static s32 _SFC_RegModeWrite(struct SFC_SFLASH_INFO *sflash, } if (ulRemain >= 0x4) { - slRet = SFC_RegWordAlignWrite(sflash, (const u32 *)(pucSrc + i), offset + i, ulRemain&(~0x3)); + slRet = SFC_RegWordAlignWrite(sflash, (const u32 *)(pucSrc + i), offset + i, ulRemain & (~0x3)); if (slRet != HRD_OK) { pr_err("[SFC] [%s %d]: SFC_RegWordAlignWrite fail\n", __func__, __LINE__); return slRet; @@ -805,7 +804,7 @@ s32 SFC_RegModeRead(struct SFC_SFLASH_INFO *sflash, } if (ulRemain >= 0x4) { - ret = SFC_RegWordAlignRead(sflash, offset + i, (u32 *) (pucDest + i), ulRemain&(~0x3)); + ret = SFC_RegWordAlignRead(sflash, offset + i, (u32 *) (pucDest + i), ulRemain & (~0x3)); if (ret != HRD_OK) { pr_err("[SFC] [%s %d]: SFC_RegWordAlignRead fail\n", __func__, __LINE__); return ret; diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.h b/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.h index 78c921c..f612731 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.h +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_hal.h @@ -16,6 +16,7 @@ #ifndef __HRD_SFLASH_HAL_H__ #define __HRD_SFLASH_HAL_H__ +#include "hrd_sflash_driver.h" extern void SFC_CheckErr(struct SFC_SFLASH_INFO *sflash); extern s32 SFC_RegModeRead(struct SFC_SFLASH_INFO *sflash, u32 offset, diff --git a/drivers/mtd/hisilicon/sfc/hrd_sflash_spec.h b/drivers/mtd/hisilicon/sfc/hrd_sflash_spec.h index a59965b..151957d 100644 --- a/drivers/mtd/hisilicon/sfc/hrd_sflash_spec.h +++ b/drivers/mtd/hisilicon/sfc/hrd_sflash_spec.h @@ -14,8 +14,8 @@ * */ -#ifndef __SPI_FLASH_SPEC_H__ -#define __SPI_FLASH_SPEC_H__ +#ifndef __HRD_SFLASH_SPEC_H__ +#define __HRD_SFLASH_SPEC_H__ #define SFLASH_DEFAULT_RDID_OPCD 0x9F /* Default Read ID */ #define SFLASH_DEFAULT_WREN_OPCD 0x06 /* Default Write Enable */ -- 1.8.3

1 2

[PATCH 01/38] Input: synaptics - switch T470s to RMI4 by default
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Lyude Paul <lyude(a)redhat.com> commit bf502391353b928e63096127e5fd8482080203f5 upstream. This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude(a)redhat.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index e8d1134..064be84 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -172,6 +172,7 @@ void synaptics_reset(struct psmouse *psmouse) "LEN004a", /* W541 */ "LEN005b", /* P50 */ "LEN005e", /* T560 */ + "LEN006c", /* T470s */ "LEN0071", /* T480 */ "LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */ "LEN0073", /* X1 Carbon G5 (Elantech) */ -- 1.8.3

1 37

[PATCH 1/2] crypto: x86 - remove SHA multibuffer routines and mcryptd
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> mainline inclusion from mainline-v4.20-rc1 commit ab8085c130edd65be0d95cc95c28b51c4c6faf9d category: bugfix bugzilla: NA CVE: NA ----------------------------------------------- As it turns out, the AVX2 multibuffer SHA routines are currently broken [0], in a way that would have likely been noticed if this code were in wide use. Since the code is too complicated to be maintained by anyone except the original authors, and since the performance benefits for real-world use cases are debatable to begin with, it is better to drop it entirely for the moment. [0] https://marc.info/?l=linux-crypto-vger&m=153476243825350&w=2 Suggested-by: Eric Biggers <ebiggers(a)google.com> Cc: Megha Dey <megha.dey(a)linux.intel.com> Cc: Tim Chen <tim.c.chen(a)linux.intel.com> Cc: Geert Uytterhoeven <geert(a)linux-m68k.org> Cc: Martin Schwidefsky <schwidefsky(a)de.ibm.com> Cc: Heiko Carstens <heiko.carstens(a)de.ibm.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- MAINTAINERS | 8 - arch/m68k/configs/amiga_defconfig | 1 - arch/m68k/configs/apollo_defconfig | 1 - arch/m68k/configs/atari_defconfig | 1 - arch/m68k/configs/bvme6000_defconfig | 1 - arch/m68k/configs/hp300_defconfig | 1 - arch/m68k/configs/mac_defconfig | 1 - arch/m68k/configs/multi_defconfig | 1 - arch/m68k/configs/mvme147_defconfig | 1 - arch/m68k/configs/mvme16x_defconfig | 1 - arch/m68k/configs/q40_defconfig | 1 - arch/m68k/configs/sun3_defconfig | 1 - arch/m68k/configs/sun3x_defconfig | 1 - arch/s390/configs/debug_defconfig | 1 - arch/s390/configs/performance_defconfig | 1 - arch/x86/crypto/Makefile | 3 - arch/x86/crypto/sha1-mb/Makefile | 14 - arch/x86/crypto/sha1-mb/sha1_mb.c | 1011 ------------------- arch/x86/crypto/sha1-mb/sha1_mb_ctx.h | 134 --- arch/x86/crypto/sha1-mb/sha1_mb_mgr.h | 110 -- arch/x86/crypto/sha1-mb/sha1_mb_mgr_datastruct.S | 287 ------ arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S | 304 ------ arch/x86/crypto/sha1-mb/sha1_mb_mgr_init_avx2.c | 64 -- arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.S | 209 ---- arch/x86/crypto/sha1-mb/sha1_x8_avx2.S | 492 --------- arch/x86/crypto/sha256-mb/Makefile | 14 - arch/x86/crypto/sha256-mb/sha256_mb.c | 1013 ------------------- arch/x86/crypto/sha256-mb/sha256_mb_ctx.h | 134 --- arch/x86/crypto/sha256-mb/sha256_mb_mgr.h | 108 -- .../crypto/sha256-mb/sha256_mb_mgr_datastruct.S | 304 ------ .../crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S | 307 ------ .../x86/crypto/sha256-mb/sha256_mb_mgr_init_avx2.c | 65 -- .../crypto/sha256-mb/sha256_mb_mgr_submit_avx2.S | 214 ---- arch/x86/crypto/sha256-mb/sha256_x8_avx2.S | 598 ----------- arch/x86/crypto/sha512-mb/Makefile | 12 - arch/x86/crypto/sha512-mb/sha512_mb.c | 1047 -------------------- arch/x86/crypto/sha512-mb/sha512_mb_ctx.h | 128 --- arch/x86/crypto/sha512-mb/sha512_mb_mgr.h | 104 -- .../crypto/sha512-mb/sha512_mb_mgr_datastruct.S | 281 ------ .../crypto/sha512-mb/sha512_mb_mgr_flush_avx2.S | 297 ------ .../x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c | 69 -- .../crypto/sha512-mb/sha512_mb_mgr_submit_avx2.S | 224 ----- arch/x86/crypto/sha512-mb/sha512_x4_avx2.S | 531 ---------- crypto/Kconfig | 62 -- crypto/Makefile | 1 - crypto/mcryptd.c | 675 ------------- include/crypto/mcryptd.h | 114 --- 47 files changed, 8952 deletions(-) delete mode 100644 arch/x86/crypto/sha1-mb/Makefile delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb.c delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_ctx.h delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_mgr.h delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_mgr_datastruct.S delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_mgr_init_avx2.c delete mode 100644 arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.S delete mode 100644 arch/x86/crypto/sha1-mb/sha1_x8_avx2.S delete mode 100644 arch/x86/crypto/sha256-mb/Makefile delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb.c delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_ctx.h delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_mgr.h delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_mgr_datastruct.S delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_mgr_init_avx2.c delete mode 100644 arch/x86/crypto/sha256-mb/sha256_mb_mgr_submit_avx2.S delete mode 100644 arch/x86/crypto/sha256-mb/sha256_x8_avx2.S delete mode 100644 arch/x86/crypto/sha512-mb/Makefile delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb.c delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_ctx.h delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_mgr.h delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_mgr_datastruct.S delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_mgr_flush_avx2.S delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c delete mode 100644 arch/x86/crypto/sha512-mb/sha512_mb_mgr_submit_avx2.S delete mode 100644 arch/x86/crypto/sha512-mb/sha512_x4_avx2.S delete mode 100644 crypto/mcryptd.c delete mode 100644 include/crypto/mcryptd.h diff --git a/MAINTAINERS b/MAINTAINERS index 588fc68..b143d31 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7565,14 +7565,6 @@ S: Supported F: drivers/infiniband/hw/i40iw/ F: include/uapi/rdma/i40iw-abi.h -INTEL SHA MULTIBUFFER DRIVER -M: Megha Dey <megha.dey(a)linux.intel.com> -R: Tim Chen <tim.c.chen(a)linux.intel.com> -L: linux-crypto(a)vger.kernel.org -S: Supported -F: arch/x86/crypto/sha*-mb/ -F: crypto/mcryptd.c - INTEL TELEMETRY DRIVER M: Souvik Kumar Chakravarty <souvik.k.chakravarty(a)intel.com> L: platform-driver-x86(a)vger.kernel.org diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index 93a3c3c..85904b7 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -621,7 +621,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index e3d0efd..9b3818b 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -578,7 +578,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 75ac0c7..7696778 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -599,7 +599,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index c6e4927..7dd264d 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -570,7 +570,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index b00d1c4..515f743 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -580,7 +580,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index 85cac37..8e1038c 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -602,7 +602,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index b3a5d1e..62c8aaa 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -684,7 +684,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 0ca2260..733973f 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -570,7 +570,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 8e3d10d..fee30cc 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -570,7 +570,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index ff7e653..eebf9c9 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -593,7 +593,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index 612cf46..dabc543 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -571,7 +571,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index a6a7bb6..0d9a5c2 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -572,7 +572,6 @@ CONFIG_CRYPTO_ECDH=m CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_USER=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_AEGIS128=m diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig index 941d8cc..259d169 100644 --- a/arch/s390/configs/debug_defconfig +++ b/arch/s390/configs/debug_defconfig @@ -668,7 +668,6 @@ CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index eb6f75f..37fd60c 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -610,7 +610,6 @@ CONFIG_CRYPTO_USER=m # CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set CONFIG_CRYPTO_PCRYPT=m CONFIG_CRYPTO_CRYPTD=m -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_TEST=m CONFIG_CRYPTO_CHACHA20POLY1305=m CONFIG_CRYPTO_LRW=m diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile index a450ad5..9edfa54 100644 --- a/arch/x86/crypto/Makefile +++ b/arch/x86/crypto/Makefile @@ -60,9 +60,6 @@ endif ifeq ($(avx2_supported),yes) obj-$(CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64) += camellia-aesni-avx2.o obj-$(CONFIG_CRYPTO_SERPENT_AVX2_X86_64) += serpent-avx2.o - obj-$(CONFIG_CRYPTO_SHA1_MB) += sha1-mb/ - obj-$(CONFIG_CRYPTO_SHA256_MB) += sha256-mb/ - obj-$(CONFIG_CRYPTO_SHA512_MB) += sha512-mb/ obj-$(CONFIG_CRYPTO_MORUS1280_AVX2) += morus1280-avx2.o endif diff --git a/arch/x86/crypto/sha1-mb/Makefile b/arch/x86/crypto/sha1-mb/Makefile deleted file mode 100644 index 815ded3..00000000 --- a/arch/x86/crypto/sha1-mb/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Arch-specific CryptoAPI modules. -# - -OBJECT_FILES_NON_STANDARD := y - -avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ - $(comma)4)$(comma)%ymm2,yes,no) -ifeq ($(avx2_supported),yes) - obj-$(CONFIG_CRYPTO_SHA1_MB) += sha1-mb.o - sha1-mb-y := sha1_mb.o sha1_mb_mgr_flush_avx2.o \ - sha1_mb_mgr_init_avx2.o sha1_mb_mgr_submit_avx2.o sha1_x8_avx2.o -endif diff --git a/arch/x86/crypto/sha1-mb/sha1_mb.c b/arch/x86/crypto/sha1-mb/sha1_mb.c deleted file mode 100644 index b938056..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb.c +++ /dev/null @@ -1,1011 +0,0 @@ -/* - * Multi buffer SHA1 algorithm Glue Code - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <crypto/internal/hash.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/cryptohash.h> -#include <linux/types.h> -#include <linux/list.h> -#include <crypto/scatterwalk.h> -#include <crypto/sha.h> -#include <crypto/mcryptd.h> -#include <crypto/crypto_wq.h> -#include <asm/byteorder.h> -#include <linux/hardirq.h> -#include <asm/fpu/api.h> -#include "sha1_mb_ctx.h" - -#define FLUSH_INTERVAL 1000 /* in usec */ - -static struct mcryptd_alg_state sha1_mb_alg_state; - -struct sha1_mb_ctx { - struct mcryptd_ahash *mcryptd_tfm; -}; - -static inline struct mcryptd_hash_request_ctx - *cast_hash_to_mcryptd_ctx(struct sha1_hash_ctx *hash_ctx) -{ - struct ahash_request *areq; - - areq = container_of((void *) hash_ctx, struct ahash_request, __ctx); - return container_of(areq, struct mcryptd_hash_request_ctx, areq); -} - -static inline struct ahash_request - *cast_mcryptd_ctx_to_req(struct mcryptd_hash_request_ctx *ctx) -{ - return container_of((void *) ctx, struct ahash_request, __ctx); -} - -static void req_ctx_init(struct mcryptd_hash_request_ctx *rctx, - struct ahash_request *areq) -{ - rctx->flag = HASH_UPDATE; -} - -static asmlinkage void (*sha1_job_mgr_init)(struct sha1_mb_mgr *state); -static asmlinkage struct job_sha1* (*sha1_job_mgr_submit) - (struct sha1_mb_mgr *state, struct job_sha1 *job); -static asmlinkage struct job_sha1* (*sha1_job_mgr_flush) - (struct sha1_mb_mgr *state); -static asmlinkage struct job_sha1* (*sha1_job_mgr_get_comp_job) - (struct sha1_mb_mgr *state); - -static inline uint32_t sha1_pad(uint8_t padblock[SHA1_BLOCK_SIZE * 2], - uint64_t total_len) -{ - uint32_t i = total_len & (SHA1_BLOCK_SIZE - 1); - - memset(&padblock[i], 0, SHA1_BLOCK_SIZE); - padblock[i] = 0x80; - - i += ((SHA1_BLOCK_SIZE - 1) & - (0 - (total_len + SHA1_PADLENGTHFIELD_SIZE + 1))) - + 1 + SHA1_PADLENGTHFIELD_SIZE; - -#if SHA1_PADLENGTHFIELD_SIZE == 16 - *((uint64_t *) &padblock[i - 16]) = 0; -#endif - - *((uint64_t *) &padblock[i - 8]) = cpu_to_be64(total_len << 3); - - /* Number of extra blocks to hash */ - return i >> SHA1_LOG2_BLOCK_SIZE; -} - -static struct sha1_hash_ctx *sha1_ctx_mgr_resubmit(struct sha1_ctx_mgr *mgr, - struct sha1_hash_ctx *ctx) -{ - while (ctx) { - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Clear PROCESSING bit */ - ctx->status = HASH_CTX_STS_COMPLETE; - return ctx; - } - - /* - * If the extra blocks are empty, begin hashing what remains - * in the user's buffer. - */ - if (ctx->partial_block_buffer_length == 0 && - ctx->incoming_buffer_length) { - - const void *buffer = ctx->incoming_buffer; - uint32_t len = ctx->incoming_buffer_length; - uint32_t copy_len; - - /* - * Only entire blocks can be hashed. - * Copy remainder to extra blocks buffer. - */ - copy_len = len & (SHA1_BLOCK_SIZE-1); - - if (copy_len) { - len -= copy_len; - memcpy(ctx->partial_block_buffer, - ((const char *) buffer + len), - copy_len); - ctx->partial_block_buffer_length = copy_len; - } - - ctx->incoming_buffer_length = 0; - - /* len should be a multiple of the block size now */ - assert((len % SHA1_BLOCK_SIZE) == 0); - - /* Set len to the number of blocks to be hashed */ - len >>= SHA1_LOG2_BLOCK_SIZE; - - if (len) { - - ctx->job.buffer = (uint8_t *) buffer; - ctx->job.len = len; - ctx = (struct sha1_hash_ctx *)sha1_job_mgr_submit(&mgr->mgr, - &ctx->job); - continue; - } - } - - /* - * If the extra blocks are not empty, then we are - * either on the last block(s) or we need more - * user input before continuing. - */ - if (ctx->status & HASH_CTX_STS_LAST) { - - uint8_t *buf = ctx->partial_block_buffer; - uint32_t n_extra_blocks = - sha1_pad(buf, ctx->total_length); - - ctx->status = (HASH_CTX_STS_PROCESSING | - HASH_CTX_STS_COMPLETE); - ctx->job.buffer = buf; - ctx->job.len = (uint32_t) n_extra_blocks; - ctx = (struct sha1_hash_ctx *) - sha1_job_mgr_submit(&mgr->mgr, &ctx->job); - continue; - } - - ctx->status = HASH_CTX_STS_IDLE; - return ctx; - } - - return NULL; -} - -static struct sha1_hash_ctx - *sha1_ctx_mgr_get_comp_ctx(struct sha1_ctx_mgr *mgr) -{ - /* - * If get_comp_job returns NULL, there are no jobs complete. - * If get_comp_job returns a job, verify that it is safe to return to - * the user. - * If it is not ready, resubmit the job to finish processing. - * If sha1_ctx_mgr_resubmit returned a job, it is ready to be returned. - * Otherwise, all jobs currently being managed by the hash_ctx_mgr - * still need processing. - */ - struct sha1_hash_ctx *ctx; - - ctx = (struct sha1_hash_ctx *) sha1_job_mgr_get_comp_job(&mgr->mgr); - return sha1_ctx_mgr_resubmit(mgr, ctx); -} - -static void sha1_ctx_mgr_init(struct sha1_ctx_mgr *mgr) -{ - sha1_job_mgr_init(&mgr->mgr); -} - -static struct sha1_hash_ctx *sha1_ctx_mgr_submit(struct sha1_ctx_mgr *mgr, - struct sha1_hash_ctx *ctx, - const void *buffer, - uint32_t len, - int flags) -{ - if (flags & ~(HASH_UPDATE | HASH_LAST)) { - /* User should not pass anything other than UPDATE or LAST */ - ctx->error = HASH_CTX_ERROR_INVALID_FLAGS; - return ctx; - } - - if (ctx->status & HASH_CTX_STS_PROCESSING) { - /* Cannot submit to a currently processing job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_PROCESSING; - return ctx; - } - - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Cannot update a finished job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_COMPLETED; - return ctx; - } - - /* - * If we made it here, there were no errors during this call to - * submit - */ - ctx->error = HASH_CTX_ERROR_NONE; - - /* Store buffer ptr info from user */ - ctx->incoming_buffer = buffer; - ctx->incoming_buffer_length = len; - - /* - * Store the user's request flags and mark this ctx as currently - * being processed. - */ - ctx->status = (flags & HASH_LAST) ? - (HASH_CTX_STS_PROCESSING | HASH_CTX_STS_LAST) : - HASH_CTX_STS_PROCESSING; - - /* Advance byte counter */ - ctx->total_length += len; - - /* - * If there is anything currently buffered in the extra blocks, - * append to it until it contains a whole block. - * Or if the user's buffer contains less than a whole block, - * append as much as possible to the extra block. - */ - if (ctx->partial_block_buffer_length || len < SHA1_BLOCK_SIZE) { - /* - * Compute how many bytes to copy from user buffer into - * extra block - */ - uint32_t copy_len = SHA1_BLOCK_SIZE - - ctx->partial_block_buffer_length; - if (len < copy_len) - copy_len = len; - - if (copy_len) { - /* Copy and update relevant pointers and counters */ - memcpy(&ctx->partial_block_buffer[ctx->partial_block_buffer_length], - buffer, copy_len); - - ctx->partial_block_buffer_length += copy_len; - ctx->incoming_buffer = (const void *) - ((const char *)buffer + copy_len); - ctx->incoming_buffer_length = len - copy_len; - } - - /* - * The extra block should never contain more than 1 block - * here - */ - assert(ctx->partial_block_buffer_length <= SHA1_BLOCK_SIZE); - - /* - * If the extra block buffer contains exactly 1 block, it can - * be hashed. - */ - if (ctx->partial_block_buffer_length >= SHA1_BLOCK_SIZE) { - ctx->partial_block_buffer_length = 0; - - ctx->job.buffer = ctx->partial_block_buffer; - ctx->job.len = 1; - ctx = (struct sha1_hash_ctx *) - sha1_job_mgr_submit(&mgr->mgr, &ctx->job); - } - } - - return sha1_ctx_mgr_resubmit(mgr, ctx); -} - -static struct sha1_hash_ctx *sha1_ctx_mgr_flush(struct sha1_ctx_mgr *mgr) -{ - struct sha1_hash_ctx *ctx; - - while (1) { - ctx = (struct sha1_hash_ctx *) sha1_job_mgr_flush(&mgr->mgr); - - /* If flush returned 0, there are no more jobs in flight. */ - if (!ctx) - return NULL; - - /* - * If flush returned a job, resubmit the job to finish - * processing. - */ - ctx = sha1_ctx_mgr_resubmit(mgr, ctx); - - /* - * If sha1_ctx_mgr_resubmit returned a job, it is ready to be - * returned. Otherwise, all jobs currently being managed by the - * sha1_ctx_mgr still need processing. Loop. - */ - if (ctx) - return ctx; - } -} - -static int sha1_mb_init(struct ahash_request *areq) -{ - struct sha1_hash_ctx *sctx = ahash_request_ctx(areq); - - hash_ctx_init(sctx); - sctx->job.result_digest[0] = SHA1_H0; - sctx->job.result_digest[1] = SHA1_H1; - sctx->job.result_digest[2] = SHA1_H2; - sctx->job.result_digest[3] = SHA1_H3; - sctx->job.result_digest[4] = SHA1_H4; - sctx->total_length = 0; - sctx->partial_block_buffer_length = 0; - sctx->status = HASH_CTX_STS_IDLE; - - return 0; -} - -static int sha1_mb_set_results(struct mcryptd_hash_request_ctx *rctx) -{ - int i; - struct sha1_hash_ctx *sctx = ahash_request_ctx(&rctx->areq); - __be32 *dst = (__be32 *) rctx->out; - - for (i = 0; i < 5; ++i) - dst[i] = cpu_to_be32(sctx->job.result_digest[i]); - - return 0; -} - -static int sha_finish_walk(struct mcryptd_hash_request_ctx **ret_rctx, - struct mcryptd_alg_cstate *cstate, bool flush) -{ - int flag = HASH_UPDATE; - int nbytes, err = 0; - struct mcryptd_hash_request_ctx *rctx = *ret_rctx; - struct sha1_hash_ctx *sha_ctx; - - /* more work ? */ - while (!(rctx->flag & HASH_DONE)) { - nbytes = crypto_ahash_walk_done(&rctx->walk, 0); - if (nbytes < 0) { - err = nbytes; - goto out; - } - /* check if the walk is done */ - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - if (rctx->flag & HASH_FINAL) - flag |= HASH_LAST; - - } - sha_ctx = (struct sha1_hash_ctx *) - ahash_request_ctx(&rctx->areq); - kernel_fpu_begin(); - sha_ctx = sha1_ctx_mgr_submit(cstate->mgr, sha_ctx, - rctx->walk.data, nbytes, flag); - if (!sha_ctx) { - if (flush) - sha_ctx = sha1_ctx_mgr_flush(cstate->mgr); - } - kernel_fpu_end(); - if (sha_ctx) - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - else { - rctx = NULL; - goto out; - } - } - - /* copy the results */ - if (rctx->flag & HASH_FINAL) - sha1_mb_set_results(rctx); - -out: - *ret_rctx = rctx; - return err; -} - -static int sha_complete_job(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate, - int err) -{ - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha1_hash_ctx *sha_ctx; - struct mcryptd_hash_request_ctx *req_ctx; - int ret; - - /* remove from work list */ - spin_lock(&cstate->work_lock); - list_del(&rctx->waiter); - spin_unlock(&cstate->work_lock); - - if (irqs_disabled()) - rctx->complete(&req->base, err); - else { - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); - } - - /* check to see if there are other jobs that are done */ - sha_ctx = sha1_ctx_mgr_get_comp_ctx(cstate->mgr); - while (sha_ctx) { - req_ctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&req_ctx, cstate, false); - if (req_ctx) { - spin_lock(&cstate->work_lock); - list_del(&req_ctx->waiter); - spin_unlock(&cstate->work_lock); - - req = cast_mcryptd_ctx_to_req(req_ctx); - if (irqs_disabled()) - req_ctx->complete(&req->base, ret); - else { - local_bh_disable(); - req_ctx->complete(&req->base, ret); - local_bh_enable(); - } - } - sha_ctx = sha1_ctx_mgr_get_comp_ctx(cstate->mgr); - } - - return 0; -} - -static void sha1_mb_add_list(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate) -{ - unsigned long next_flush; - unsigned long delay = usecs_to_jiffies(FLUSH_INTERVAL); - - /* initialize tag */ - rctx->tag.arrival = jiffies; /* tag the arrival time */ - rctx->tag.seq_num = cstate->next_seq_num++; - next_flush = rctx->tag.arrival + delay; - rctx->tag.expire = next_flush; - - spin_lock(&cstate->work_lock); - list_add_tail(&rctx->waiter, &cstate->work_list); - spin_unlock(&cstate->work_lock); - - mcryptd_arm_flusher(cstate, delay); -} - -static int sha1_mb_update(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha1_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha1_hash_ctx *sha_ctx; - int ret = 0, nbytes; - - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) - rctx->flag |= HASH_DONE; - - /* submit */ - sha_ctx = (struct sha1_hash_ctx *) ahash_request_ctx(areq); - sha1_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha1_ctx_mgr_submit(cstate->mgr, sha_ctx, rctx->walk.data, - nbytes, HASH_UPDATE); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha1_mb_finup(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha1_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha1_hash_ctx *sha_ctx; - int ret = 0, flag = HASH_UPDATE, nbytes; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - flag = HASH_LAST; - } - - /* submit */ - rctx->flag |= HASH_FINAL; - sha_ctx = (struct sha1_hash_ctx *) ahash_request_ctx(areq); - sha1_mb_add_list(rctx, cstate); - - kernel_fpu_begin(); - sha_ctx = sha1_ctx_mgr_submit(cstate->mgr, sha_ctx, rctx->walk.data, - nbytes, flag); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha1_mb_final(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha1_mb_alg_state.alg_cstate); - - struct sha1_hash_ctx *sha_ctx; - int ret = 0; - u8 data; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - rctx->flag |= HASH_DONE | HASH_FINAL; - - sha_ctx = (struct sha1_hash_ctx *) ahash_request_ctx(areq); - /* flag HASH_FINAL and 0 data size */ - sha1_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha1_ctx_mgr_submit(cstate->mgr, sha_ctx, &data, 0, - HASH_LAST); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha1_mb_export(struct ahash_request *areq, void *out) -{ - struct sha1_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(out, sctx, sizeof(*sctx)); - - return 0; -} - -static int sha1_mb_import(struct ahash_request *areq, const void *in) -{ - struct sha1_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; -} - -static int sha1_mb_async_init_tfm(struct crypto_tfm *tfm) -{ - struct mcryptd_ahash *mcryptd_tfm; - struct sha1_mb_ctx *ctx = crypto_tfm_ctx(tfm); - struct mcryptd_hash_ctx *mctx; - - mcryptd_tfm = mcryptd_alloc_ahash("__intel_sha1-mb", - CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL); - if (IS_ERR(mcryptd_tfm)) - return PTR_ERR(mcryptd_tfm); - mctx = crypto_ahash_ctx(&mcryptd_tfm->base); - mctx->alg_state = &sha1_mb_alg_state; - ctx->mcryptd_tfm = mcryptd_tfm; - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - crypto_ahash_reqsize(&mcryptd_tfm->base)); - - return 0; -} - -static void sha1_mb_async_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha1_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static int sha1_mb_areq_init_tfm(struct crypto_tfm *tfm) -{ - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - sizeof(struct sha1_hash_ctx)); - - return 0; -} - -static void sha1_mb_areq_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha1_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static struct ahash_alg sha1_mb_areq_alg = { - .init = sha1_mb_init, - .update = sha1_mb_update, - .final = sha1_mb_final, - .finup = sha1_mb_finup, - .export = sha1_mb_export, - .import = sha1_mb_import, - .halg = { - .digestsize = SHA1_DIGEST_SIZE, - .statesize = sizeof(struct sha1_hash_ctx), - .base = { - .cra_name = "__sha1-mb", - .cra_driver_name = "__intel_sha1-mb", - .cra_priority = 100, - /* - * use ASYNC flag as some buffers in multi-buffer - * algo may not have completed before hashing thread - * sleep - */ - .cra_flags = CRYPTO_ALG_ASYNC | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = SHA1_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT - (sha1_mb_areq_alg.halg.base.cra_list), - .cra_init = sha1_mb_areq_init_tfm, - .cra_exit = sha1_mb_areq_exit_tfm, - .cra_ctxsize = sizeof(struct sha1_hash_ctx), - } - } -}; - -static int sha1_mb_async_init(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_init(mcryptd_req); -} - -static int sha1_mb_async_update(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_update(mcryptd_req); -} - -static int sha1_mb_async_finup(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_finup(mcryptd_req); -} - -static int sha1_mb_async_final(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_final(mcryptd_req); -} - -static int sha1_mb_async_digest(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_digest(mcryptd_req); -} - -static int sha1_mb_async_export(struct ahash_request *req, void *out) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_export(mcryptd_req, out); -} - -static int sha1_mb_async_import(struct ahash_request *req, const void *in) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha1_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - struct crypto_ahash *child = mcryptd_ahash_child(mcryptd_tfm); - struct mcryptd_hash_request_ctx *rctx; - struct ahash_request *areq; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - rctx = ahash_request_ctx(mcryptd_req); - areq = &rctx->areq; - - ahash_request_set_tfm(areq, child); - ahash_request_set_callback(areq, CRYPTO_TFM_REQ_MAY_SLEEP, - rctx->complete, req); - - return crypto_ahash_import(mcryptd_req, in); -} - -static struct ahash_alg sha1_mb_async_alg = { - .init = sha1_mb_async_init, - .update = sha1_mb_async_update, - .final = sha1_mb_async_final, - .finup = sha1_mb_async_finup, - .digest = sha1_mb_async_digest, - .export = sha1_mb_async_export, - .import = sha1_mb_async_import, - .halg = { - .digestsize = SHA1_DIGEST_SIZE, - .statesize = sizeof(struct sha1_hash_ctx), - .base = { - .cra_name = "sha1", - .cra_driver_name = "sha1_mb", - /* - * Low priority, since with few concurrent hash requests - * this is extremely slow due to the flush delay. Users - * whose workloads would benefit from this can request - * it explicitly by driver name, or can increase its - * priority at runtime using NETLINK_CRYPTO. - */ - .cra_priority = 50, - .cra_flags = CRYPTO_ALG_ASYNC, - .cra_blocksize = SHA1_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT(sha1_mb_async_alg.halg.base.cra_list), - .cra_init = sha1_mb_async_init_tfm, - .cra_exit = sha1_mb_async_exit_tfm, - .cra_ctxsize = sizeof(struct sha1_mb_ctx), - .cra_alignmask = 0, - }, - }, -}; - -static unsigned long sha1_mb_flusher(struct mcryptd_alg_cstate *cstate) -{ - struct mcryptd_hash_request_ctx *rctx; - unsigned long cur_time; - unsigned long next_flush = 0; - struct sha1_hash_ctx *sha_ctx; - - - cur_time = jiffies; - - while (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - if (time_before(cur_time, rctx->tag.expire)) - break; - kernel_fpu_begin(); - sha_ctx = (struct sha1_hash_ctx *) - sha1_ctx_mgr_flush(cstate->mgr); - kernel_fpu_end(); - if (!sha_ctx) { - pr_err("sha1_mb error: nothing got flushed for non-empty list\n"); - break; - } - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - sha_finish_walk(&rctx, cstate, true); - sha_complete_job(rctx, cstate, 0); - } - - if (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - /* get the hash context and then flush time */ - next_flush = rctx->tag.expire; - mcryptd_arm_flusher(cstate, get_delay(next_flush)); - } - return next_flush; -} - -static int __init sha1_mb_mod_init(void) -{ - - int cpu; - int err; - struct mcryptd_alg_cstate *cpu_state; - - /* check for dependent cpu features */ - if (!boot_cpu_has(X86_FEATURE_AVX2) || - !boot_cpu_has(X86_FEATURE_BMI2)) - return -ENODEV; - - /* initialize multibuffer structures */ - sha1_mb_alg_state.alg_cstate = alloc_percpu(struct mcryptd_alg_cstate); - - sha1_job_mgr_init = sha1_mb_mgr_init_avx2; - sha1_job_mgr_submit = sha1_mb_mgr_submit_avx2; - sha1_job_mgr_flush = sha1_mb_mgr_flush_avx2; - sha1_job_mgr_get_comp_job = sha1_mb_mgr_get_comp_job_avx2; - - if (!sha1_mb_alg_state.alg_cstate) - return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha1_mb_alg_state.alg_cstate, cpu); - cpu_state->next_flush = 0; - cpu_state->next_seq_num = 0; - cpu_state->flusher_engaged = false; - INIT_DELAYED_WORK(&cpu_state->flush, mcryptd_flusher); - cpu_state->cpu = cpu; - cpu_state->alg_state = &sha1_mb_alg_state; - cpu_state->mgr = kzalloc(sizeof(struct sha1_ctx_mgr), - GFP_KERNEL); - if (!cpu_state->mgr) - goto err2; - sha1_ctx_mgr_init(cpu_state->mgr); - INIT_LIST_HEAD(&cpu_state->work_list); - spin_lock_init(&cpu_state->work_lock); - } - sha1_mb_alg_state.flusher = &sha1_mb_flusher; - - err = crypto_register_ahash(&sha1_mb_areq_alg); - if (err) - goto err2; - err = crypto_register_ahash(&sha1_mb_async_alg); - if (err) - goto err1; - - - return 0; -err1: - crypto_unregister_ahash(&sha1_mb_areq_alg); -err2: - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha1_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha1_mb_alg_state.alg_cstate); - return -ENODEV; -} - -static void __exit sha1_mb_mod_fini(void) -{ - int cpu; - struct mcryptd_alg_cstate *cpu_state; - - crypto_unregister_ahash(&sha1_mb_async_alg); - crypto_unregister_ahash(&sha1_mb_areq_alg); - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha1_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha1_mb_alg_state.alg_cstate); -} - -module_init(sha1_mb_mod_init); -module_exit(sha1_mb_mod_fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, multi buffer accelerated"); - -MODULE_ALIAS_CRYPTO("sha1"); diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_ctx.h b/arch/x86/crypto/sha1-mb/sha1_mb_ctx.h deleted file mode 100644 index 9454bd1..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_ctx.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Header file for multi buffer SHA context - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SHA_MB_CTX_INTERNAL_H -#define _SHA_MB_CTX_INTERNAL_H - -#include "sha1_mb_mgr.h" - -#define HASH_UPDATE 0x00 -#define HASH_LAST 0x01 -#define HASH_DONE 0x02 -#define HASH_FINAL 0x04 - -#define HASH_CTX_STS_IDLE 0x00 -#define HASH_CTX_STS_PROCESSING 0x01 -#define HASH_CTX_STS_LAST 0x02 -#define HASH_CTX_STS_COMPLETE 0x04 - -enum hash_ctx_error { - HASH_CTX_ERROR_NONE = 0, - HASH_CTX_ERROR_INVALID_FLAGS = -1, - HASH_CTX_ERROR_ALREADY_PROCESSING = -2, - HASH_CTX_ERROR_ALREADY_COMPLETED = -3, - -#ifdef HASH_CTX_DEBUG - HASH_CTX_ERROR_DEBUG_DIGEST_MISMATCH = -4, -#endif -}; - - -#define hash_ctx_user_data(ctx) ((ctx)->user_data) -#define hash_ctx_digest(ctx) ((ctx)->job.result_digest) -#define hash_ctx_processing(ctx) ((ctx)->status & HASH_CTX_STS_PROCESSING) -#define hash_ctx_complete(ctx) ((ctx)->status == HASH_CTX_STS_COMPLETE) -#define hash_ctx_status(ctx) ((ctx)->status) -#define hash_ctx_error(ctx) ((ctx)->error) -#define hash_ctx_init(ctx) \ - do { \ - (ctx)->error = HASH_CTX_ERROR_NONE; \ - (ctx)->status = HASH_CTX_STS_COMPLETE; \ - } while (0) - - -/* Hash Constants and Typedefs */ -#define SHA1_DIGEST_LENGTH 5 -#define SHA1_LOG2_BLOCK_SIZE 6 - -#define SHA1_PADLENGTHFIELD_SIZE 8 - -#ifdef SHA_MB_DEBUG -#define assert(expr) \ -do { \ - if (unlikely(!(expr))) { \ - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } \ -} while (0) -#else -#define assert(expr) do {} while (0) -#endif - -struct sha1_ctx_mgr { - struct sha1_mb_mgr mgr; -}; - -/* typedef struct sha1_ctx_mgr sha1_ctx_mgr; */ - -struct sha1_hash_ctx { - /* Must be at struct offset 0 */ - struct job_sha1 job; - /* status flag */ - int status; - /* error flag */ - int error; - - uint64_t total_length; - const void *incoming_buffer; - uint32_t incoming_buffer_length; - uint8_t partial_block_buffer[SHA1_BLOCK_SIZE * 2]; - uint32_t partial_block_buffer_length; - void *user_data; -}; - -#endif diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr.h b/arch/x86/crypto/sha1-mb/sha1_mb_mgr.h deleted file mode 100644 index 08ad1a9..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr.h +++ /dev/null @@ -1,110 +0,0 @@ -/* - * Header file for multi buffer SHA1 algorithm manager - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * James Guilford <james.guilford(a)intel.com> - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef __SHA_MB_MGR_H -#define __SHA_MB_MGR_H - - -#include <linux/types.h> - -#define NUM_SHA1_DIGEST_WORDS 5 - -enum job_sts { STS_UNKNOWN = 0, - STS_BEING_PROCESSED = 1, - STS_COMPLETED = 2, - STS_INTERNAL_ERROR = 3, - STS_ERROR = 4 -}; - -struct job_sha1 { - u8 *buffer; - u32 len; - u32 result_digest[NUM_SHA1_DIGEST_WORDS] __aligned(32); - enum job_sts status; - void *user_data; -}; - -/* SHA1 out-of-order scheduler */ - -/* typedef uint32_t sha1_digest_array[5][8]; */ - -struct sha1_args_x8 { - uint32_t digest[5][8]; - uint8_t *data_ptr[8]; -}; - -struct sha1_lane_data { - struct job_sha1 *job_in_lane; -}; - -struct sha1_mb_mgr { - struct sha1_args_x8 args; - - uint32_t lens[8]; - - /* each byte is index (0...7) of unused lanes */ - uint64_t unused_lanes; - /* byte 4 is set to FF as a flag */ - struct sha1_lane_data ldata[8]; -}; - - -#define SHA1_MB_MGR_NUM_LANES_AVX2 8 - -void sha1_mb_mgr_init_avx2(struct sha1_mb_mgr *state); -struct job_sha1 *sha1_mb_mgr_submit_avx2(struct sha1_mb_mgr *state, - struct job_sha1 *job); -struct job_sha1 *sha1_mb_mgr_flush_avx2(struct sha1_mb_mgr *state); -struct job_sha1 *sha1_mb_mgr_get_comp_job_avx2(struct sha1_mb_mgr *state); - -#endif diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_datastruct.S b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_datastruct.S deleted file mode 100644 index 86688c6..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_datastruct.S +++ /dev/null @@ -1,287 +0,0 @@ -/* - * Header file for multi buffer SHA1 algorithm data structure - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * James Guilford <james.guilford(a)intel.com> - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -# Macros for defining data structures - -# Usage example - -#START_FIELDS # JOB_AES -### name size align -#FIELD _plaintext, 8, 8 # pointer to plaintext -#FIELD _ciphertext, 8, 8 # pointer to ciphertext -#FIELD _IV, 16, 8 # IV -#FIELD _keys, 8, 8 # pointer to keys -#FIELD _len, 4, 4 # length in bytes -#FIELD _status, 4, 4 # status enumeration -#FIELD _user_data, 8, 8 # pointer to user data -#UNION _union, size1, align1, \ -# size2, align2, \ -# size3, align3, \ -# ... -#END_FIELDS -#%assign _JOB_AES_size _FIELD_OFFSET -#%assign _JOB_AES_align _STRUCT_ALIGN - -######################################################################### - -# Alternate "struc-like" syntax: -# STRUCT job_aes2 -# RES_Q .plaintext, 1 -# RES_Q .ciphertext, 1 -# RES_DQ .IV, 1 -# RES_B .nested, _JOB_AES_SIZE, _JOB_AES_ALIGN -# RES_U .union, size1, align1, \ -# size2, align2, \ -# ... -# ENDSTRUCT -# # Following only needed if nesting -# %assign job_aes2_size _FIELD_OFFSET -# %assign job_aes2_align _STRUCT_ALIGN -# -# RES_* macros take a name, a count and an optional alignment. -# The count in in terms of the base size of the macro, and the -# default alignment is the base size. -# The macros are: -# Macro Base size -# RES_B 1 -# RES_W 2 -# RES_D 4 -# RES_Q 8 -# RES_DQ 16 -# RES_Y 32 -# RES_Z 64 -# -# RES_U defines a union. It's arguments are a name and two or more -# pairs of "size, alignment" -# -# The two assigns are only needed if this structure is being nested -# within another. Even if the assigns are not done, one can still use -# STRUCT_NAME_size as the size of the structure. -# -# Note that for nesting, you still need to assign to STRUCT_NAME_size. -# -# The differences between this and using "struc" directly are that each -# type is implicitly aligned to its natural length (although this can be -# over-ridden with an explicit third parameter), and that the structure -# is padded at the end to its overall alignment. -# - -######################################################################### - -#ifndef _SHA1_MB_MGR_DATASTRUCT_ASM_ -#define _SHA1_MB_MGR_DATASTRUCT_ASM_ - -## START_FIELDS -.macro START_FIELDS - _FIELD_OFFSET = 0 - _STRUCT_ALIGN = 0 -.endm - -## FIELD name size align -.macro FIELD name size align - _FIELD_OFFSET = (_FIELD_OFFSET + (\align) - 1) & (~ ((\align)-1)) - \name = _FIELD_OFFSET - _FIELD_OFFSET = _FIELD_OFFSET + (\size) -.if (\align > _STRUCT_ALIGN) - _STRUCT_ALIGN = \align -.endif -.endm - -## END_FIELDS -.macro END_FIELDS - _FIELD_OFFSET = (_FIELD_OFFSET + _STRUCT_ALIGN-1) & (~ (_STRUCT_ALIGN-1)) -.endm - -######################################################################## - -.macro STRUCT p1 -START_FIELDS -.struc \p1 -.endm - -.macro ENDSTRUCT - tmp = _FIELD_OFFSET - END_FIELDS - tmp = (_FIELD_OFFSET - %%tmp) -.if (tmp > 0) - .lcomm tmp -.endif -.endstruc -.endm - -## RES_int name size align -.macro RES_int p1 p2 p3 - name = \p1 - size = \p2 - align = .\p3 - - _FIELD_OFFSET = (_FIELD_OFFSET + (align) - 1) & (~ ((align)-1)) -.align align -.lcomm name size - _FIELD_OFFSET = _FIELD_OFFSET + (size) -.if (align > _STRUCT_ALIGN) - _STRUCT_ALIGN = align -.endif -.endm - - - -# macro RES_B name, size [, align] -.macro RES_B _name, _size, _align=1 -RES_int _name _size _align -.endm - -# macro RES_W name, size [, align] -.macro RES_W _name, _size, _align=2 -RES_int _name 2*(_size) _align -.endm - -# macro RES_D name, size [, align] -.macro RES_D _name, _size, _align=4 -RES_int _name 4*(_size) _align -.endm - -# macro RES_Q name, size [, align] -.macro RES_Q _name, _size, _align=8 -RES_int _name 8*(_size) _align -.endm - -# macro RES_DQ name, size [, align] -.macro RES_DQ _name, _size, _align=16 -RES_int _name 16*(_size) _align -.endm - -# macro RES_Y name, size [, align] -.macro RES_Y _name, _size, _align=32 -RES_int _name 32*(_size) _align -.endm - -# macro RES_Z name, size [, align] -.macro RES_Z _name, _size, _align=64 -RES_int _name 64*(_size) _align -.endm - - -#endif - -######################################################################## -#### Define constants -######################################################################## - -######################################################################## -#### Define SHA1 Out Of Order Data Structures -######################################################################## - -START_FIELDS # LANE_DATA -### name size align -FIELD _job_in_lane, 8, 8 # pointer to job object -END_FIELDS - -_LANE_DATA_size = _FIELD_OFFSET -_LANE_DATA_align = _STRUCT_ALIGN - -######################################################################## - -START_FIELDS # SHA1_ARGS_X8 -### name size align -FIELD _digest, 4*5*8, 16 # transposed digest -FIELD _data_ptr, 8*8, 8 # array of pointers to data -END_FIELDS - -_SHA1_ARGS_X4_size = _FIELD_OFFSET -_SHA1_ARGS_X4_align = _STRUCT_ALIGN -_SHA1_ARGS_X8_size = _FIELD_OFFSET -_SHA1_ARGS_X8_align = _STRUCT_ALIGN - -######################################################################## - -START_FIELDS # MB_MGR -### name size align -FIELD _args, _SHA1_ARGS_X4_size, _SHA1_ARGS_X4_align -FIELD _lens, 4*8, 8 -FIELD _unused_lanes, 8, 8 -FIELD _ldata, _LANE_DATA_size*8, _LANE_DATA_align -END_FIELDS - -_MB_MGR_size = _FIELD_OFFSET -_MB_MGR_align = _STRUCT_ALIGN - -_args_digest = _args + _digest -_args_data_ptr = _args + _data_ptr - - -######################################################################## -#### Define constants -######################################################################## - -#define STS_UNKNOWN 0 -#define STS_BEING_PROCESSED 1 -#define STS_COMPLETED 2 - -######################################################################## -#### Define JOB_SHA1 structure -######################################################################## - -START_FIELDS # JOB_SHA1 - -### name size align -FIELD _buffer, 8, 8 # pointer to buffer -FIELD _len, 4, 4 # length in bytes -FIELD _result_digest, 5*4, 32 # Digest (output) -FIELD _status, 4, 4 -FIELD _user_data, 8, 8 -END_FIELDS - -_JOB_SHA1_size = _FIELD_OFFSET -_JOB_SHA1_align = _STRUCT_ALIGN diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S deleted file mode 100644 index 7cfba73..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_flush_avx2.S +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Flush routine for SHA1 multibuffer - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * James Guilford <james.guilford(a)intel.com> - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha1_mb_mgr_datastruct.S" - - -.extern sha1_x8_avx2 - -# LINUX register definitions -#define arg1 %rdi -#define arg2 %rsi - -# Common definitions -#define state arg1 -#define job arg2 -#define len2 arg2 - -# idx must be a register not clobbered by sha1_x8_avx2 -#define idx %r8 -#define DWORD_idx %r8d - -#define unused_lanes %rbx -#define lane_data %rbx -#define tmp2 %rbx -#define tmp2_w %ebx - -#define job_rax %rax -#define tmp1 %rax -#define size_offset %rax -#define tmp %rax -#define start_offset %rax - -#define tmp3 %arg1 - -#define extra_blocks %arg2 -#define p %arg2 - -.macro LABEL prefix n -\prefix\n\(): -.endm - -.macro JNE_SKIP i -jne skip_\i -.endm - -.altmacro -.macro SET_OFFSET _offset -offset = \_offset -.endm -.noaltmacro - -# JOB* sha1_mb_mgr_flush_avx2(MB_MGR *state) -# arg 1 : rcx : state -ENTRY(sha1_mb_mgr_flush_avx2) - FRAME_BEGIN - push %rbx - - # If bit (32+3) is set, then all lanes are empty - mov _unused_lanes(state), unused_lanes - bt $32+3, unused_lanes - jc return_null - - # find a lane with a non-null job - xor idx, idx - offset = (_ldata + 1 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne one(%rip), idx - offset = (_ldata + 2 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne two(%rip), idx - offset = (_ldata + 3 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne three(%rip), idx - offset = (_ldata + 4 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne four(%rip), idx - offset = (_ldata + 5 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne five(%rip), idx - offset = (_ldata + 6 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne six(%rip), idx - offset = (_ldata + 7 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne seven(%rip), idx - - # copy idx to empty lanes -copy_lane_data: - offset = (_args + _data_ptr) - mov offset(state,idx,8), tmp - - I = 0 -.rep 8 - offset = (_ldata + I * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) -.altmacro - JNE_SKIP %I - offset = (_args + _data_ptr + 8*I) - mov tmp, offset(state) - offset = (_lens + 4*I) - movl $0xFFFFFFFF, offset(state) -LABEL skip_ %I - I = (I+1) -.noaltmacro -.endr - - # Find min length - vmovdqu _lens+0*16(state), %xmm0 - vmovdqu _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min value in low dword - - vmovd %xmm2, DWORD_idx - mov idx, len2 - and $0xF, idx - shr $4, len2 - jz len_is_0 - - vpand clear_low_nibble(%rip), %xmm2, %xmm2 - vpshufd $0, %xmm2, %xmm2 - - vpsubd %xmm2, %xmm0, %xmm0 - vpsubd %xmm2, %xmm1, %xmm1 - - vmovdqu %xmm0, _lens+0*16(state) - vmovdqu %xmm1, _lens+1*16(state) - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha1_x8_avx2 - # state and idx are intact - - -len_is_0: - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $4, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens(state, idx, 4) - - vmovd _args_digest(state , idx, 4) , %xmm0 - vpinsrd $1, _args_digest+1*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state, idx, 4), %xmm0, %xmm0 - movl _args_digest+4*32(state, idx, 4), tmp2_w - - vmovdqu %xmm0, _result_digest(job_rax) - offset = (_result_digest + 1*16) - mov tmp2_w, offset(job_rax) - -return: - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return -ENDPROC(sha1_mb_mgr_flush_avx2) - - -################################################################# - -.align 16 -ENTRY(sha1_mb_mgr_get_comp_job_avx2) - push %rbx - - ## if bit 32+3 is set, then all lanes are empty - mov _unused_lanes(state), unused_lanes - bt $(32+3), unused_lanes - jc .return_null - - # Find min length - vmovdqu _lens(state), %xmm0 - vmovdqu _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min value in low dword - - vmovd %xmm2, DWORD_idx - test $~0xF, idx - jnz .return_null - - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $4, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens(state, idx, 4) - - vmovd _args_digest(state, idx, 4), %xmm0 - vpinsrd $1, _args_digest+1*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state, idx, 4), %xmm0, %xmm0 - movl _args_digest+4*32(state, idx, 4), tmp2_w - - vmovdqu %xmm0, _result_digest(job_rax) - movl tmp2_w, _result_digest+1*16(job_rax) - - pop %rbx - - ret - -.return_null: - xor job_rax, job_rax - pop %rbx - ret -ENDPROC(sha1_mb_mgr_get_comp_job_avx2) - -.section .rodata.cst16.clear_low_nibble, "aM", @progbits, 16 -.align 16 -clear_low_nibble: -.octa 0x000000000000000000000000FFFFFFF0 - -.section .rodata.cst8, "aM", @progbits, 8 -.align 8 -one: -.quad 1 -two: -.quad 2 -three: -.quad 3 -four: -.quad 4 -five: -.quad 5 -six: -.quad 6 -seven: -.quad 7 diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_init_avx2.c b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_init_avx2.c deleted file mode 100644 index d2add0d..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_init_avx2.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * Initialization code for multi buffer SHA1 algorithm for AVX2 - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "sha1_mb_mgr.h" - -void sha1_mb_mgr_init_avx2(struct sha1_mb_mgr *state) -{ - unsigned int j; - state->unused_lanes = 0xF76543210ULL; - for (j = 0; j < 8; j++) { - state->lens[j] = 0xFFFFFFFF; - state->ldata[j].job_in_lane = NULL; - } -} diff --git a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.S b/arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.S deleted file mode 100644 index 7a93b1c..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_mb_mgr_submit_avx2.S +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Buffer submit code for multi buffer SHA1 algorithm - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * James Guilford <james.guilford(a)intel.com> - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha1_mb_mgr_datastruct.S" - - -.extern sha1_x8_avx - -# LINUX register definitions -arg1 = %rdi -arg2 = %rsi -size_offset = %rcx -tmp2 = %rcx -extra_blocks = %rdx - -# Common definitions -#define state arg1 -#define job %rsi -#define len2 arg2 -#define p2 arg2 - -# idx must be a register not clobberred by sha1_x8_avx2 -idx = %r8 -DWORD_idx = %r8d -last_len = %r8 - -p = %r11 -start_offset = %r11 - -unused_lanes = %rbx -BYTE_unused_lanes = %bl - -job_rax = %rax -len = %rax -DWORD_len = %eax - -lane = %r12 -tmp3 = %r12 - -tmp = %r9 -DWORD_tmp = %r9d - -lane_data = %r10 - -# JOB* submit_mb_mgr_submit_avx2(MB_MGR *state, job_sha1 *job) -# arg 1 : rcx : state -# arg 2 : rdx : job -ENTRY(sha1_mb_mgr_submit_avx2) - FRAME_BEGIN - push %rbx - push %r12 - - mov _unused_lanes(state), unused_lanes - mov unused_lanes, lane - and $0xF, lane - shr $4, unused_lanes - imul $_LANE_DATA_size, lane, lane_data - movl $STS_BEING_PROCESSED, _status(job) - lea _ldata(state, lane_data), lane_data - mov unused_lanes, _unused_lanes(state) - movl _len(job), DWORD_len - - mov job, _job_in_lane(lane_data) - shl $4, len - or lane, len - - movl DWORD_len, _lens(state , lane, 4) - - # Load digest words from result_digest - vmovdqu _result_digest(job), %xmm0 - mov _result_digest+1*16(job), DWORD_tmp - vmovd %xmm0, _args_digest(state, lane, 4) - vpextrd $1, %xmm0, _args_digest+1*32(state , lane, 4) - vpextrd $2, %xmm0, _args_digest+2*32(state , lane, 4) - vpextrd $3, %xmm0, _args_digest+3*32(state , lane, 4) - movl DWORD_tmp, _args_digest+4*32(state , lane, 4) - - mov _buffer(job), p - mov p, _args_data_ptr(state, lane, 8) - - cmp $0xF, unused_lanes - jne return_null - -start_loop: - # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min value in low dword - - vmovd %xmm2, DWORD_idx - mov idx, len2 - and $0xF, idx - shr $4, len2 - jz len_is_0 - - vpand clear_low_nibble(%rip), %xmm2, %xmm2 - vpshufd $0, %xmm2, %xmm2 - - vpsubd %xmm2, %xmm0, %xmm0 - vpsubd %xmm2, %xmm1, %xmm1 - - vmovdqa %xmm0, _lens + 0*16(state) - vmovdqa %xmm1, _lens + 1*16(state) - - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha1_x8_avx2 - - # state and idx are intact - -len_is_0: - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - mov _unused_lanes(state), unused_lanes - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - shl $4, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens(state, idx, 4) - - vmovd _args_digest(state, idx, 4), %xmm0 - vpinsrd $1, _args_digest+1*32(state , idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state , idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state , idx, 4), %xmm0, %xmm0 - movl _args_digest+4*32(state, idx, 4), DWORD_tmp - - vmovdqu %xmm0, _result_digest(job_rax) - movl DWORD_tmp, _result_digest+1*16(job_rax) - -return: - pop %r12 - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return - -ENDPROC(sha1_mb_mgr_submit_avx2) - -.section .rodata.cst16.clear_low_nibble, "aM", @progbits, 16 -.align 16 -clear_low_nibble: - .octa 0x000000000000000000000000FFFFFFF0 diff --git a/arch/x86/crypto/sha1-mb/sha1_x8_avx2.S b/arch/x86/crypto/sha1-mb/sha1_x8_avx2.S deleted file mode 100644 index 20f77aa..00000000 --- a/arch/x86/crypto/sha1-mb/sha1_x8_avx2.S +++ /dev/null @@ -1,492 +0,0 @@ -/* - * Multi-buffer SHA1 algorithm hash compute routine - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2014 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * James Guilford <james.guilford(a)intel.com> - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2014 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include "sha1_mb_mgr_datastruct.S" - -## code to compute oct SHA1 using SSE-256 -## outer calling routine takes care of save and restore of XMM registers - -## Function clobbers: rax, rcx, rdx, rbx, rsi, rdi, r9-r15# ymm0-15 -## -## Linux clobbers: rax rbx rcx rdx rsi r9 r10 r11 r12 r13 r14 r15 -## Linux preserves: rdi rbp r8 -## -## clobbers ymm0-15 - - -# TRANSPOSE8 r0, r1, r2, r3, r4, r5, r6, r7, t0, t1 -# "transpose" data in {r0...r7} using temps {t0...t1} -# Input looks like: {r0 r1 r2 r3 r4 r5 r6 r7} -# r0 = {a7 a6 a5 a4 a3 a2 a1 a0} -# r1 = {b7 b6 b5 b4 b3 b2 b1 b0} -# r2 = {c7 c6 c5 c4 c3 c2 c1 c0} -# r3 = {d7 d6 d5 d4 d3 d2 d1 d0} -# r4 = {e7 e6 e5 e4 e3 e2 e1 e0} -# r5 = {f7 f6 f5 f4 f3 f2 f1 f0} -# r6 = {g7 g6 g5 g4 g3 g2 g1 g0} -# r7 = {h7 h6 h5 h4 h3 h2 h1 h0} -# -# Output looks like: {r0 r1 r2 r3 r4 r5 r6 r7} -# r0 = {h0 g0 f0 e0 d0 c0 b0 a0} -# r1 = {h1 g1 f1 e1 d1 c1 b1 a1} -# r2 = {h2 g2 f2 e2 d2 c2 b2 a2} -# r3 = {h3 g3 f3 e3 d3 c3 b3 a3} -# r4 = {h4 g4 f4 e4 d4 c4 b4 a4} -# r5 = {h5 g5 f5 e5 d5 c5 b5 a5} -# r6 = {h6 g6 f6 e6 d6 c6 b6 a6} -# r7 = {h7 g7 f7 e7 d7 c7 b7 a7} -# - -.macro TRANSPOSE8 r0 r1 r2 r3 r4 r5 r6 r7 t0 t1 - # process top half (r0..r3) {a...d} - vshufps $0x44, \r1, \r0, \t0 # t0 = {b5 b4 a5 a4 b1 b0 a1 a0} - vshufps $0xEE, \r1, \r0, \r0 # r0 = {b7 b6 a7 a6 b3 b2 a3 a2} - vshufps $0x44, \r3, \r2, \t1 # t1 = {d5 d4 c5 c4 d1 d0 c1 c0} - vshufps $0xEE, \r3, \r2, \r2 # r2 = {d7 d6 c7 c6 d3 d2 c3 c2} - vshufps $0xDD, \t1, \t0, \r3 # r3 = {d5 c5 b5 a5 d1 c1 b1 a1} - vshufps $0x88, \r2, \r0, \r1 # r1 = {d6 c6 b6 a6 d2 c2 b2 a2} - vshufps $0xDD, \r2, \r0, \r0 # r0 = {d7 c7 b7 a7 d3 c3 b3 a3} - vshufps $0x88, \t1, \t0, \t0 # t0 = {d4 c4 b4 a4 d0 c0 b0 a0} - - # use r2 in place of t0 - # process bottom half (r4..r7) {e...h} - vshufps $0x44, \r5, \r4, \r2 # r2 = {f5 f4 e5 e4 f1 f0 e1 e0} - vshufps $0xEE, \r5, \r4, \r4 # r4 = {f7 f6 e7 e6 f3 f2 e3 e2} - vshufps $0x44, \r7, \r6, \t1 # t1 = {h5 h4 g5 g4 h1 h0 g1 g0} - vshufps $0xEE, \r7, \r6, \r6 # r6 = {h7 h6 g7 g6 h3 h2 g3 g2} - vshufps $0xDD, \t1, \r2, \r7 # r7 = {h5 g5 f5 e5 h1 g1 f1 e1} - vshufps $0x88, \r6, \r4, \r5 # r5 = {h6 g6 f6 e6 h2 g2 f2 e2} - vshufps $0xDD, \r6, \r4, \r4 # r4 = {h7 g7 f7 e7 h3 g3 f3 e3} - vshufps $0x88, \t1, \r2, \t1 # t1 = {h4 g4 f4 e4 h0 g0 f0 e0} - - vperm2f128 $0x13, \r1, \r5, \r6 # h6...a6 - vperm2f128 $0x02, \r1, \r5, \r2 # h2...a2 - vperm2f128 $0x13, \r3, \r7, \r5 # h5...a5 - vperm2f128 $0x02, \r3, \r7, \r1 # h1...a1 - vperm2f128 $0x13, \r0, \r4, \r7 # h7...a7 - vperm2f128 $0x02, \r0, \r4, \r3 # h3...a3 - vperm2f128 $0x13, \t0, \t1, \r4 # h4...a4 - vperm2f128 $0x02, \t0, \t1, \r0 # h0...a0 - -.endm -## -## Magic functions defined in FIPS 180-1 -## -# macro MAGIC_F0 F,B,C,D,T ## F = (D ^ (B & (C ^ D))) -.macro MAGIC_F0 regF regB regC regD regT - vpxor \regD, \regC, \regF - vpand \regB, \regF, \regF - vpxor \regD, \regF, \regF -.endm - -# macro MAGIC_F1 F,B,C,D,T ## F = (B ^ C ^ D) -.macro MAGIC_F1 regF regB regC regD regT - vpxor \regC, \regD, \regF - vpxor \regB, \regF, \regF -.endm - -# macro MAGIC_F2 F,B,C,D,T ## F = ((B & C) | (B & D) | (C & D)) -.macro MAGIC_F2 regF regB regC regD regT - vpor \regC, \regB, \regF - vpand \regC, \regB, \regT - vpand \regD, \regF, \regF - vpor \regT, \regF, \regF -.endm - -# macro MAGIC_F3 F,B,C,D,T ## F = (B ^ C ^ D) -.macro MAGIC_F3 regF regB regC regD regT - MAGIC_F1 \regF,\regB,\regC,\regD,\regT -.endm - -# PROLD reg, imm, tmp -.macro PROLD reg imm tmp - vpsrld $(32-\imm), \reg, \tmp - vpslld $\imm, \reg, \reg - vpor \tmp, \reg, \reg -.endm - -.macro PROLD_nd reg imm tmp src - vpsrld $(32-\imm), \src, \tmp - vpslld $\imm, \src, \reg - vpor \tmp, \reg, \reg -.endm - -.macro SHA1_STEP_00_15 regA regB regC regD regE regT regF memW immCNT MAGIC - vpaddd \immCNT, \regE, \regE - vpaddd \memW*32(%rsp), \regE, \regE - PROLD_nd \regT, 5, \regF, \regA - vpaddd \regT, \regE, \regE - \MAGIC \regF, \regB, \regC, \regD, \regT - PROLD \regB, 30, \regT - vpaddd \regF, \regE, \regE -.endm - -.macro SHA1_STEP_16_79 regA regB regC regD regE regT regF memW immCNT MAGIC - vpaddd \immCNT, \regE, \regE - offset = ((\memW - 14) & 15) * 32 - vmovdqu offset(%rsp), W14 - vpxor W14, W16, W16 - offset = ((\memW - 8) & 15) * 32 - vpxor offset(%rsp), W16, W16 - offset = ((\memW - 3) & 15) * 32 - vpxor offset(%rsp), W16, W16 - vpsrld $(32-1), W16, \regF - vpslld $1, W16, W16 - vpor W16, \regF, \regF - - ROTATE_W - - offset = ((\memW - 0) & 15) * 32 - vmovdqu \regF, offset(%rsp) - vpaddd \regF, \regE, \regE - PROLD_nd \regT, 5, \regF, \regA - vpaddd \regT, \regE, \regE - \MAGIC \regF,\regB,\regC,\regD,\regT ## FUN = MAGIC_Fi(B,C,D) - PROLD \regB,30, \regT - vpaddd \regF, \regE, \regE -.endm - -######################################################################## -######################################################################## -######################################################################## - -## FRAMESZ plus pushes must be an odd multiple of 8 -YMM_SAVE = (15-15)*32 -FRAMESZ = 32*16 + YMM_SAVE -_YMM = FRAMESZ - YMM_SAVE - -#define VMOVPS vmovups - -IDX = %rax -inp0 = %r9 -inp1 = %r10 -inp2 = %r11 -inp3 = %r12 -inp4 = %r13 -inp5 = %r14 -inp6 = %r15 -inp7 = %rcx -arg1 = %rdi -arg2 = %rsi -RSP_SAVE = %rdx - -# ymm0 A -# ymm1 B -# ymm2 C -# ymm3 D -# ymm4 E -# ymm5 F AA -# ymm6 T0 BB -# ymm7 T1 CC -# ymm8 T2 DD -# ymm9 T3 EE -# ymm10 T4 TMP -# ymm11 T5 FUN -# ymm12 T6 K -# ymm13 T7 W14 -# ymm14 T8 W15 -# ymm15 T9 W16 - - -A = %ymm0 -B = %ymm1 -C = %ymm2 -D = %ymm3 -E = %ymm4 -F = %ymm5 -T0 = %ymm6 -T1 = %ymm7 -T2 = %ymm8 -T3 = %ymm9 -T4 = %ymm10 -T5 = %ymm11 -T6 = %ymm12 -T7 = %ymm13 -T8 = %ymm14 -T9 = %ymm15 - -AA = %ymm5 -BB = %ymm6 -CC = %ymm7 -DD = %ymm8 -EE = %ymm9 -TMP = %ymm10 -FUN = %ymm11 -K = %ymm12 -W14 = %ymm13 -W15 = %ymm14 -W16 = %ymm15 - -.macro ROTATE_ARGS - TMP_ = E - E = D - D = C - C = B - B = A - A = TMP_ -.endm - -.macro ROTATE_W -TMP_ = W16 -W16 = W15 -W15 = W14 -W14 = TMP_ -.endm - -# 8 streams x 5 32bit words per digest x 4 bytes per word -#define DIGEST_SIZE (8*5*4) - -.align 32 - -# void sha1_x8_avx2(void **input_data, UINT128 *digest, UINT32 size) -# arg 1 : pointer to array[4] of pointer to input data -# arg 2 : size (in blocks) ;; assumed to be >= 1 -# -ENTRY(sha1_x8_avx2) - - # save callee-saved clobbered registers to comply with C function ABI - push %r12 - push %r13 - push %r14 - push %r15 - - #save rsp - mov %rsp, RSP_SAVE - sub $FRAMESZ, %rsp - - #align rsp to 32 Bytes - and $~0x1F, %rsp - - ## Initialize digests - vmovdqu 0*32(arg1), A - vmovdqu 1*32(arg1), B - vmovdqu 2*32(arg1), C - vmovdqu 3*32(arg1), D - vmovdqu 4*32(arg1), E - - ## transpose input onto stack - mov _data_ptr+0*8(arg1),inp0 - mov _data_ptr+1*8(arg1),inp1 - mov _data_ptr+2*8(arg1),inp2 - mov _data_ptr+3*8(arg1),inp3 - mov _data_ptr+4*8(arg1),inp4 - mov _data_ptr+5*8(arg1),inp5 - mov _data_ptr+6*8(arg1),inp6 - mov _data_ptr+7*8(arg1),inp7 - - xor IDX, IDX -lloop: - vmovdqu PSHUFFLE_BYTE_FLIP_MASK(%rip), F - I=0 -.rep 2 - VMOVPS (inp0, IDX), T0 - VMOVPS (inp1, IDX), T1 - VMOVPS (inp2, IDX), T2 - VMOVPS (inp3, IDX), T3 - VMOVPS (inp4, IDX), T4 - VMOVPS (inp5, IDX), T5 - VMOVPS (inp6, IDX), T6 - VMOVPS (inp7, IDX), T7 - - TRANSPOSE8 T0, T1, T2, T3, T4, T5, T6, T7, T8, T9 - vpshufb F, T0, T0 - vmovdqu T0, (I*8)*32(%rsp) - vpshufb F, T1, T1 - vmovdqu T1, (I*8+1)*32(%rsp) - vpshufb F, T2, T2 - vmovdqu T2, (I*8+2)*32(%rsp) - vpshufb F, T3, T3 - vmovdqu T3, (I*8+3)*32(%rsp) - vpshufb F, T4, T4 - vmovdqu T4, (I*8+4)*32(%rsp) - vpshufb F, T5, T5 - vmovdqu T5, (I*8+5)*32(%rsp) - vpshufb F, T6, T6 - vmovdqu T6, (I*8+6)*32(%rsp) - vpshufb F, T7, T7 - vmovdqu T7, (I*8+7)*32(%rsp) - add $32, IDX - I = (I+1) -.endr - # save old digests - vmovdqu A,AA - vmovdqu B,BB - vmovdqu C,CC - vmovdqu D,DD - vmovdqu E,EE - -## -## perform 0-79 steps -## - vmovdqu K00_19(%rip), K -## do rounds 0...15 - I = 0 -.rep 16 - SHA1_STEP_00_15 A,B,C,D,E, TMP,FUN, I, K, MAGIC_F0 - ROTATE_ARGS - I = (I+1) -.endr - -## do rounds 16...19 - vmovdqu ((16 - 16) & 15) * 32 (%rsp), W16 - vmovdqu ((16 - 15) & 15) * 32 (%rsp), W15 -.rep 4 - SHA1_STEP_16_79 A,B,C,D,E, TMP,FUN, I, K, MAGIC_F0 - ROTATE_ARGS - I = (I+1) -.endr - -## do rounds 20...39 - vmovdqu K20_39(%rip), K -.rep 20 - SHA1_STEP_16_79 A,B,C,D,E, TMP,FUN, I, K, MAGIC_F1 - ROTATE_ARGS - I = (I+1) -.endr - -## do rounds 40...59 - vmovdqu K40_59(%rip), K -.rep 20 - SHA1_STEP_16_79 A,B,C,D,E, TMP,FUN, I, K, MAGIC_F2 - ROTATE_ARGS - I = (I+1) -.endr - -## do rounds 60...79 - vmovdqu K60_79(%rip), K -.rep 20 - SHA1_STEP_16_79 A,B,C,D,E, TMP,FUN, I, K, MAGIC_F3 - ROTATE_ARGS - I = (I+1) -.endr - - vpaddd AA,A,A - vpaddd BB,B,B - vpaddd CC,C,C - vpaddd DD,D,D - vpaddd EE,E,E - - sub $1, arg2 - jne lloop - - # write out digests - vmovdqu A, 0*32(arg1) - vmovdqu B, 1*32(arg1) - vmovdqu C, 2*32(arg1) - vmovdqu D, 3*32(arg1) - vmovdqu E, 4*32(arg1) - - # update input pointers - add IDX, inp0 - add IDX, inp1 - add IDX, inp2 - add IDX, inp3 - add IDX, inp4 - add IDX, inp5 - add IDX, inp6 - add IDX, inp7 - mov inp0, _data_ptr (arg1) - mov inp1, _data_ptr + 1*8(arg1) - mov inp2, _data_ptr + 2*8(arg1) - mov inp3, _data_ptr + 3*8(arg1) - mov inp4, _data_ptr + 4*8(arg1) - mov inp5, _data_ptr + 5*8(arg1) - mov inp6, _data_ptr + 6*8(arg1) - mov inp7, _data_ptr + 7*8(arg1) - - ################ - ## Postamble - - mov RSP_SAVE, %rsp - - # restore callee-saved clobbered registers - pop %r15 - pop %r14 - pop %r13 - pop %r12 - - ret -ENDPROC(sha1_x8_avx2) - - -.section .rodata.cst32.K00_19, "aM", @progbits, 32 -.align 32 -K00_19: -.octa 0x5A8279995A8279995A8279995A827999 -.octa 0x5A8279995A8279995A8279995A827999 - -.section .rodata.cst32.K20_39, "aM", @progbits, 32 -.align 32 -K20_39: -.octa 0x6ED9EBA16ED9EBA16ED9EBA16ED9EBA1 -.octa 0x6ED9EBA16ED9EBA16ED9EBA16ED9EBA1 - -.section .rodata.cst32.K40_59, "aM", @progbits, 32 -.align 32 -K40_59: -.octa 0x8F1BBCDC8F1BBCDC8F1BBCDC8F1BBCDC -.octa 0x8F1BBCDC8F1BBCDC8F1BBCDC8F1BBCDC - -.section .rodata.cst32.K60_79, "aM", @progbits, 32 -.align 32 -K60_79: -.octa 0xCA62C1D6CA62C1D6CA62C1D6CA62C1D6 -.octa 0xCA62C1D6CA62C1D6CA62C1D6CA62C1D6 - -.section .rodata.cst32.PSHUFFLE_BYTE_FLIP_MASK, "aM", @progbits, 32 -.align 32 -PSHUFFLE_BYTE_FLIP_MASK: -.octa 0x0c0d0e0f08090a0b0405060700010203 -.octa 0x0c0d0e0f08090a0b0405060700010203 diff --git a/arch/x86/crypto/sha256-mb/Makefile b/arch/x86/crypto/sha256-mb/Makefile deleted file mode 100644 index 53ad6e7..00000000 --- a/arch/x86/crypto/sha256-mb/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Arch-specific CryptoAPI modules. -# - -OBJECT_FILES_NON_STANDARD := y - -avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ - $(comma)4)$(comma)%ymm2,yes,no) -ifeq ($(avx2_supported),yes) - obj-$(CONFIG_CRYPTO_SHA256_MB) += sha256-mb.o - sha256-mb-y := sha256_mb.o sha256_mb_mgr_flush_avx2.o \ - sha256_mb_mgr_init_avx2.o sha256_mb_mgr_submit_avx2.o sha256_x8_avx2.o -endif diff --git a/arch/x86/crypto/sha256-mb/sha256_mb.c b/arch/x86/crypto/sha256-mb/sha256_mb.c deleted file mode 100644 index 97c5fc43..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb.c +++ /dev/null @@ -1,1013 +0,0 @@ -/* - * Multi buffer SHA256 algorithm Glue Code - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <crypto/internal/hash.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/cryptohash.h> -#include <linux/types.h> -#include <linux/list.h> -#include <crypto/scatterwalk.h> -#include <crypto/sha.h> -#include <crypto/mcryptd.h> -#include <crypto/crypto_wq.h> -#include <asm/byteorder.h> -#include <linux/hardirq.h> -#include <asm/fpu/api.h> -#include "sha256_mb_ctx.h" - -#define FLUSH_INTERVAL 1000 /* in usec */ - -static struct mcryptd_alg_state sha256_mb_alg_state; - -struct sha256_mb_ctx { - struct mcryptd_ahash *mcryptd_tfm; -}; - -static inline struct mcryptd_hash_request_ctx - *cast_hash_to_mcryptd_ctx(struct sha256_hash_ctx *hash_ctx) -{ - struct ahash_request *areq; - - areq = container_of((void *) hash_ctx, struct ahash_request, __ctx); - return container_of(areq, struct mcryptd_hash_request_ctx, areq); -} - -static inline struct ahash_request - *cast_mcryptd_ctx_to_req(struct mcryptd_hash_request_ctx *ctx) -{ - return container_of((void *) ctx, struct ahash_request, __ctx); -} - -static void req_ctx_init(struct mcryptd_hash_request_ctx *rctx, - struct ahash_request *areq) -{ - rctx->flag = HASH_UPDATE; -} - -static asmlinkage void (*sha256_job_mgr_init)(struct sha256_mb_mgr *state); -static asmlinkage struct job_sha256* (*sha256_job_mgr_submit) - (struct sha256_mb_mgr *state, struct job_sha256 *job); -static asmlinkage struct job_sha256* (*sha256_job_mgr_flush) - (struct sha256_mb_mgr *state); -static asmlinkage struct job_sha256* (*sha256_job_mgr_get_comp_job) - (struct sha256_mb_mgr *state); - -inline uint32_t sha256_pad(uint8_t padblock[SHA256_BLOCK_SIZE * 2], - uint64_t total_len) -{ - uint32_t i = total_len & (SHA256_BLOCK_SIZE - 1); - - memset(&padblock[i], 0, SHA256_BLOCK_SIZE); - padblock[i] = 0x80; - - i += ((SHA256_BLOCK_SIZE - 1) & - (0 - (total_len + SHA256_PADLENGTHFIELD_SIZE + 1))) - + 1 + SHA256_PADLENGTHFIELD_SIZE; - -#if SHA256_PADLENGTHFIELD_SIZE == 16 - *((uint64_t *) &padblock[i - 16]) = 0; -#endif - - *((uint64_t *) &padblock[i - 8]) = cpu_to_be64(total_len << 3); - - /* Number of extra blocks to hash */ - return i >> SHA256_LOG2_BLOCK_SIZE; -} - -static struct sha256_hash_ctx - *sha256_ctx_mgr_resubmit(struct sha256_ctx_mgr *mgr, - struct sha256_hash_ctx *ctx) -{ - while (ctx) { - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Clear PROCESSING bit */ - ctx->status = HASH_CTX_STS_COMPLETE; - return ctx; - } - - /* - * If the extra blocks are empty, begin hashing what remains - * in the user's buffer. - */ - if (ctx->partial_block_buffer_length == 0 && - ctx->incoming_buffer_length) { - - const void *buffer = ctx->incoming_buffer; - uint32_t len = ctx->incoming_buffer_length; - uint32_t copy_len; - - /* - * Only entire blocks can be hashed. - * Copy remainder to extra blocks buffer. - */ - copy_len = len & (SHA256_BLOCK_SIZE-1); - - if (copy_len) { - len -= copy_len; - memcpy(ctx->partial_block_buffer, - ((const char *) buffer + len), - copy_len); - ctx->partial_block_buffer_length = copy_len; - } - - ctx->incoming_buffer_length = 0; - - /* len should be a multiple of the block size now */ - assert((len % SHA256_BLOCK_SIZE) == 0); - - /* Set len to the number of blocks to be hashed */ - len >>= SHA256_LOG2_BLOCK_SIZE; - - if (len) { - - ctx->job.buffer = (uint8_t *) buffer; - ctx->job.len = len; - ctx = (struct sha256_hash_ctx *) - sha256_job_mgr_submit(&mgr->mgr, &ctx->job); - continue; - } - } - - /* - * If the extra blocks are not empty, then we are - * either on the last block(s) or we need more - * user input before continuing. - */ - if (ctx->status & HASH_CTX_STS_LAST) { - - uint8_t *buf = ctx->partial_block_buffer; - uint32_t n_extra_blocks = - sha256_pad(buf, ctx->total_length); - - ctx->status = (HASH_CTX_STS_PROCESSING | - HASH_CTX_STS_COMPLETE); - ctx->job.buffer = buf; - ctx->job.len = (uint32_t) n_extra_blocks; - ctx = (struct sha256_hash_ctx *) - sha256_job_mgr_submit(&mgr->mgr, &ctx->job); - continue; - } - - ctx->status = HASH_CTX_STS_IDLE; - return ctx; - } - - return NULL; -} - -static struct sha256_hash_ctx - *sha256_ctx_mgr_get_comp_ctx(struct sha256_ctx_mgr *mgr) -{ - /* - * If get_comp_job returns NULL, there are no jobs complete. - * If get_comp_job returns a job, verify that it is safe to return to - * the user. If it is not ready, resubmit the job to finish processing. - * If sha256_ctx_mgr_resubmit returned a job, it is ready to be - * returned. Otherwise, all jobs currently being managed by the - * hash_ctx_mgr still need processing. - */ - struct sha256_hash_ctx *ctx; - - ctx = (struct sha256_hash_ctx *) sha256_job_mgr_get_comp_job(&mgr->mgr); - return sha256_ctx_mgr_resubmit(mgr, ctx); -} - -static void sha256_ctx_mgr_init(struct sha256_ctx_mgr *mgr) -{ - sha256_job_mgr_init(&mgr->mgr); -} - -static struct sha256_hash_ctx *sha256_ctx_mgr_submit(struct sha256_ctx_mgr *mgr, - struct sha256_hash_ctx *ctx, - const void *buffer, - uint32_t len, - int flags) -{ - if (flags & ~(HASH_UPDATE | HASH_LAST)) { - /* User should not pass anything other than UPDATE or LAST */ - ctx->error = HASH_CTX_ERROR_INVALID_FLAGS; - return ctx; - } - - if (ctx->status & HASH_CTX_STS_PROCESSING) { - /* Cannot submit to a currently processing job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_PROCESSING; - return ctx; - } - - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Cannot update a finished job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_COMPLETED; - return ctx; - } - - /* If we made it here, there was no error during this call to submit */ - ctx->error = HASH_CTX_ERROR_NONE; - - /* Store buffer ptr info from user */ - ctx->incoming_buffer = buffer; - ctx->incoming_buffer_length = len; - - /* - * Store the user's request flags and mark this ctx as currently - * being processed. - */ - ctx->status = (flags & HASH_LAST) ? - (HASH_CTX_STS_PROCESSING | HASH_CTX_STS_LAST) : - HASH_CTX_STS_PROCESSING; - - /* Advance byte counter */ - ctx->total_length += len; - - /* - * If there is anything currently buffered in the extra blocks, - * append to it until it contains a whole block. - * Or if the user's buffer contains less than a whole block, - * append as much as possible to the extra block. - */ - if (ctx->partial_block_buffer_length || len < SHA256_BLOCK_SIZE) { - /* - * Compute how many bytes to copy from user buffer into - * extra block - */ - uint32_t copy_len = SHA256_BLOCK_SIZE - - ctx->partial_block_buffer_length; - if (len < copy_len) - copy_len = len; - - if (copy_len) { - /* Copy and update relevant pointers and counters */ - memcpy( - &ctx->partial_block_buffer[ctx->partial_block_buffer_length], - buffer, copy_len); - - ctx->partial_block_buffer_length += copy_len; - ctx->incoming_buffer = (const void *) - ((const char *)buffer + copy_len); - ctx->incoming_buffer_length = len - copy_len; - } - - /* The extra block should never contain more than 1 block */ - assert(ctx->partial_block_buffer_length <= SHA256_BLOCK_SIZE); - - /* - * If the extra block buffer contains exactly 1 block, - * it can be hashed. - */ - if (ctx->partial_block_buffer_length >= SHA256_BLOCK_SIZE) { - ctx->partial_block_buffer_length = 0; - - ctx->job.buffer = ctx->partial_block_buffer; - ctx->job.len = 1; - ctx = (struct sha256_hash_ctx *) - sha256_job_mgr_submit(&mgr->mgr, &ctx->job); - } - } - - return sha256_ctx_mgr_resubmit(mgr, ctx); -} - -static struct sha256_hash_ctx *sha256_ctx_mgr_flush(struct sha256_ctx_mgr *mgr) -{ - struct sha256_hash_ctx *ctx; - - while (1) { - ctx = (struct sha256_hash_ctx *) - sha256_job_mgr_flush(&mgr->mgr); - - /* If flush returned 0, there are no more jobs in flight. */ - if (!ctx) - return NULL; - - /* - * If flush returned a job, resubmit the job to finish - * processing. - */ - ctx = sha256_ctx_mgr_resubmit(mgr, ctx); - - /* - * If sha256_ctx_mgr_resubmit returned a job, it is ready to - * be returned. Otherwise, all jobs currently being managed by - * the sha256_ctx_mgr still need processing. Loop. - */ - if (ctx) - return ctx; - } -} - -static int sha256_mb_init(struct ahash_request *areq) -{ - struct sha256_hash_ctx *sctx = ahash_request_ctx(areq); - - hash_ctx_init(sctx); - sctx->job.result_digest[0] = SHA256_H0; - sctx->job.result_digest[1] = SHA256_H1; - sctx->job.result_digest[2] = SHA256_H2; - sctx->job.result_digest[3] = SHA256_H3; - sctx->job.result_digest[4] = SHA256_H4; - sctx->job.result_digest[5] = SHA256_H5; - sctx->job.result_digest[6] = SHA256_H6; - sctx->job.result_digest[7] = SHA256_H7; - sctx->total_length = 0; - sctx->partial_block_buffer_length = 0; - sctx->status = HASH_CTX_STS_IDLE; - - return 0; -} - -static int sha256_mb_set_results(struct mcryptd_hash_request_ctx *rctx) -{ - int i; - struct sha256_hash_ctx *sctx = ahash_request_ctx(&rctx->areq); - __be32 *dst = (__be32 *) rctx->out; - - for (i = 0; i < 8; ++i) - dst[i] = cpu_to_be32(sctx->job.result_digest[i]); - - return 0; -} - -static int sha_finish_walk(struct mcryptd_hash_request_ctx **ret_rctx, - struct mcryptd_alg_cstate *cstate, bool flush) -{ - int flag = HASH_UPDATE; - int nbytes, err = 0; - struct mcryptd_hash_request_ctx *rctx = *ret_rctx; - struct sha256_hash_ctx *sha_ctx; - - /* more work ? */ - while (!(rctx->flag & HASH_DONE)) { - nbytes = crypto_ahash_walk_done(&rctx->walk, 0); - if (nbytes < 0) { - err = nbytes; - goto out; - } - /* check if the walk is done */ - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - if (rctx->flag & HASH_FINAL) - flag |= HASH_LAST; - - } - sha_ctx = (struct sha256_hash_ctx *) - ahash_request_ctx(&rctx->areq); - kernel_fpu_begin(); - sha_ctx = sha256_ctx_mgr_submit(cstate->mgr, sha_ctx, - rctx->walk.data, nbytes, flag); - if (!sha_ctx) { - if (flush) - sha_ctx = sha256_ctx_mgr_flush(cstate->mgr); - } - kernel_fpu_end(); - if (sha_ctx) - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - else { - rctx = NULL; - goto out; - } - } - - /* copy the results */ - if (rctx->flag & HASH_FINAL) - sha256_mb_set_results(rctx); - -out: - *ret_rctx = rctx; - return err; -} - -static int sha_complete_job(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate, - int err) -{ - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha256_hash_ctx *sha_ctx; - struct mcryptd_hash_request_ctx *req_ctx; - int ret; - - /* remove from work list */ - spin_lock(&cstate->work_lock); - list_del(&rctx->waiter); - spin_unlock(&cstate->work_lock); - - if (irqs_disabled()) - rctx->complete(&req->base, err); - else { - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); - } - - /* check to see if there are other jobs that are done */ - sha_ctx = sha256_ctx_mgr_get_comp_ctx(cstate->mgr); - while (sha_ctx) { - req_ctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&req_ctx, cstate, false); - if (req_ctx) { - spin_lock(&cstate->work_lock); - list_del(&req_ctx->waiter); - spin_unlock(&cstate->work_lock); - - req = cast_mcryptd_ctx_to_req(req_ctx); - if (irqs_disabled()) - req_ctx->complete(&req->base, ret); - else { - local_bh_disable(); - req_ctx->complete(&req->base, ret); - local_bh_enable(); - } - } - sha_ctx = sha256_ctx_mgr_get_comp_ctx(cstate->mgr); - } - - return 0; -} - -static void sha256_mb_add_list(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate) -{ - unsigned long next_flush; - unsigned long delay = usecs_to_jiffies(FLUSH_INTERVAL); - - /* initialize tag */ - rctx->tag.arrival = jiffies; /* tag the arrival time */ - rctx->tag.seq_num = cstate->next_seq_num++; - next_flush = rctx->tag.arrival + delay; - rctx->tag.expire = next_flush; - - spin_lock(&cstate->work_lock); - list_add_tail(&rctx->waiter, &cstate->work_list); - spin_unlock(&cstate->work_lock); - - mcryptd_arm_flusher(cstate, delay); -} - -static int sha256_mb_update(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha256_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha256_hash_ctx *sha_ctx; - int ret = 0, nbytes; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) - rctx->flag |= HASH_DONE; - - /* submit */ - sha_ctx = (struct sha256_hash_ctx *) ahash_request_ctx(areq); - sha256_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha256_ctx_mgr_submit(cstate->mgr, sha_ctx, rctx->walk.data, - nbytes, HASH_UPDATE); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha256_mb_finup(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha256_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha256_hash_ctx *sha_ctx; - int ret = 0, flag = HASH_UPDATE, nbytes; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - flag = HASH_LAST; - } - - /* submit */ - rctx->flag |= HASH_FINAL; - sha_ctx = (struct sha256_hash_ctx *) ahash_request_ctx(areq); - sha256_mb_add_list(rctx, cstate); - - kernel_fpu_begin(); - sha_ctx = sha256_ctx_mgr_submit(cstate->mgr, sha_ctx, rctx->walk.data, - nbytes, flag); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha256_mb_final(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, - areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha256_mb_alg_state.alg_cstate); - - struct sha256_hash_ctx *sha_ctx; - int ret = 0; - u8 data; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - rctx->flag |= HASH_DONE | HASH_FINAL; - - sha_ctx = (struct sha256_hash_ctx *) ahash_request_ctx(areq); - /* flag HASH_FINAL and 0 data size */ - sha256_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha256_ctx_mgr_submit(cstate->mgr, sha_ctx, &data, 0, - HASH_LAST); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha256_mb_export(struct ahash_request *areq, void *out) -{ - struct sha256_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(out, sctx, sizeof(*sctx)); - - return 0; -} - -static int sha256_mb_import(struct ahash_request *areq, const void *in) -{ - struct sha256_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; -} - -static int sha256_mb_async_init_tfm(struct crypto_tfm *tfm) -{ - struct mcryptd_ahash *mcryptd_tfm; - struct sha256_mb_ctx *ctx = crypto_tfm_ctx(tfm); - struct mcryptd_hash_ctx *mctx; - - mcryptd_tfm = mcryptd_alloc_ahash("__intel_sha256-mb", - CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL); - if (IS_ERR(mcryptd_tfm)) - return PTR_ERR(mcryptd_tfm); - mctx = crypto_ahash_ctx(&mcryptd_tfm->base); - mctx->alg_state = &sha256_mb_alg_state; - ctx->mcryptd_tfm = mcryptd_tfm; - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - crypto_ahash_reqsize(&mcryptd_tfm->base)); - - return 0; -} - -static void sha256_mb_async_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha256_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static int sha256_mb_areq_init_tfm(struct crypto_tfm *tfm) -{ - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - sizeof(struct sha256_hash_ctx)); - - return 0; -} - -static void sha256_mb_areq_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha256_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static struct ahash_alg sha256_mb_areq_alg = { - .init = sha256_mb_init, - .update = sha256_mb_update, - .final = sha256_mb_final, - .finup = sha256_mb_finup, - .export = sha256_mb_export, - .import = sha256_mb_import, - .halg = { - .digestsize = SHA256_DIGEST_SIZE, - .statesize = sizeof(struct sha256_hash_ctx), - .base = { - .cra_name = "__sha256-mb", - .cra_driver_name = "__intel_sha256-mb", - .cra_priority = 100, - /* - * use ASYNC flag as some buffers in multi-buffer - * algo may not have completed before hashing thread - * sleep - */ - .cra_flags = CRYPTO_ALG_ASYNC | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = SHA256_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT - (sha256_mb_areq_alg.halg.base.cra_list), - .cra_init = sha256_mb_areq_init_tfm, - .cra_exit = sha256_mb_areq_exit_tfm, - .cra_ctxsize = sizeof(struct sha256_hash_ctx), - } - } -}; - -static int sha256_mb_async_init(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_init(mcryptd_req); -} - -static int sha256_mb_async_update(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_update(mcryptd_req); -} - -static int sha256_mb_async_finup(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_finup(mcryptd_req); -} - -static int sha256_mb_async_final(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_final(mcryptd_req); -} - -static int sha256_mb_async_digest(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_digest(mcryptd_req); -} - -static int sha256_mb_async_export(struct ahash_request *req, void *out) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_export(mcryptd_req, out); -} - -static int sha256_mb_async_import(struct ahash_request *req, const void *in) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha256_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - struct crypto_ahash *child = mcryptd_ahash_child(mcryptd_tfm); - struct mcryptd_hash_request_ctx *rctx; - struct ahash_request *areq; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - rctx = ahash_request_ctx(mcryptd_req); - areq = &rctx->areq; - - ahash_request_set_tfm(areq, child); - ahash_request_set_callback(areq, CRYPTO_TFM_REQ_MAY_SLEEP, - rctx->complete, req); - - return crypto_ahash_import(mcryptd_req, in); -} - -static struct ahash_alg sha256_mb_async_alg = { - .init = sha256_mb_async_init, - .update = sha256_mb_async_update, - .final = sha256_mb_async_final, - .finup = sha256_mb_async_finup, - .export = sha256_mb_async_export, - .import = sha256_mb_async_import, - .digest = sha256_mb_async_digest, - .halg = { - .digestsize = SHA256_DIGEST_SIZE, - .statesize = sizeof(struct sha256_hash_ctx), - .base = { - .cra_name = "sha256", - .cra_driver_name = "sha256_mb", - /* - * Low priority, since with few concurrent hash requests - * this is extremely slow due to the flush delay. Users - * whose workloads would benefit from this can request - * it explicitly by driver name, or can increase its - * priority at runtime using NETLINK_CRYPTO. - */ - .cra_priority = 50, - .cra_flags = CRYPTO_ALG_ASYNC, - .cra_blocksize = SHA256_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT - (sha256_mb_async_alg.halg.base.cra_list), - .cra_init = sha256_mb_async_init_tfm, - .cra_exit = sha256_mb_async_exit_tfm, - .cra_ctxsize = sizeof(struct sha256_mb_ctx), - .cra_alignmask = 0, - }, - }, -}; - -static unsigned long sha256_mb_flusher(struct mcryptd_alg_cstate *cstate) -{ - struct mcryptd_hash_request_ctx *rctx; - unsigned long cur_time; - unsigned long next_flush = 0; - struct sha256_hash_ctx *sha_ctx; - - - cur_time = jiffies; - - while (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - if (time_before(cur_time, rctx->tag.expire)) - break; - kernel_fpu_begin(); - sha_ctx = (struct sha256_hash_ctx *) - sha256_ctx_mgr_flush(cstate->mgr); - kernel_fpu_end(); - if (!sha_ctx) { - pr_err("sha256_mb error: nothing got" - " flushed for non-empty list\n"); - break; - } - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - sha_finish_walk(&rctx, cstate, true); - sha_complete_job(rctx, cstate, 0); - } - - if (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - /* get the hash context and then flush time */ - next_flush = rctx->tag.expire; - mcryptd_arm_flusher(cstate, get_delay(next_flush)); - } - return next_flush; -} - -static int __init sha256_mb_mod_init(void) -{ - - int cpu; - int err; - struct mcryptd_alg_cstate *cpu_state; - - /* check for dependent cpu features */ - if (!boot_cpu_has(X86_FEATURE_AVX2) || - !boot_cpu_has(X86_FEATURE_BMI2)) - return -ENODEV; - - /* initialize multibuffer structures */ - sha256_mb_alg_state.alg_cstate = alloc_percpu - (struct mcryptd_alg_cstate); - - sha256_job_mgr_init = sha256_mb_mgr_init_avx2; - sha256_job_mgr_submit = sha256_mb_mgr_submit_avx2; - sha256_job_mgr_flush = sha256_mb_mgr_flush_avx2; - sha256_job_mgr_get_comp_job = sha256_mb_mgr_get_comp_job_avx2; - - if (!sha256_mb_alg_state.alg_cstate) - return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha256_mb_alg_state.alg_cstate, cpu); - cpu_state->next_flush = 0; - cpu_state->next_seq_num = 0; - cpu_state->flusher_engaged = false; - INIT_DELAYED_WORK(&cpu_state->flush, mcryptd_flusher); - cpu_state->cpu = cpu; - cpu_state->alg_state = &sha256_mb_alg_state; - cpu_state->mgr = kzalloc(sizeof(struct sha256_ctx_mgr), - GFP_KERNEL); - if (!cpu_state->mgr) - goto err2; - sha256_ctx_mgr_init(cpu_state->mgr); - INIT_LIST_HEAD(&cpu_state->work_list); - spin_lock_init(&cpu_state->work_lock); - } - sha256_mb_alg_state.flusher = &sha256_mb_flusher; - - err = crypto_register_ahash(&sha256_mb_areq_alg); - if (err) - goto err2; - err = crypto_register_ahash(&sha256_mb_async_alg); - if (err) - goto err1; - - - return 0; -err1: - crypto_unregister_ahash(&sha256_mb_areq_alg); -err2: - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha256_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha256_mb_alg_state.alg_cstate); - return -ENODEV; -} - -static void __exit sha256_mb_mod_fini(void) -{ - int cpu; - struct mcryptd_alg_cstate *cpu_state; - - crypto_unregister_ahash(&sha256_mb_async_alg); - crypto_unregister_ahash(&sha256_mb_areq_alg); - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha256_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha256_mb_alg_state.alg_cstate); -} - -module_init(sha256_mb_mod_init); -module_exit(sha256_mb_mod_fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, multi buffer accelerated"); - -MODULE_ALIAS_CRYPTO("sha256"); diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_ctx.h b/arch/x86/crypto/sha256-mb/sha256_mb_ctx.h deleted file mode 100644 index 7c43254..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_ctx.h +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Header file for multi buffer SHA256 context - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SHA_MB_CTX_INTERNAL_H -#define _SHA_MB_CTX_INTERNAL_H - -#include "sha256_mb_mgr.h" - -#define HASH_UPDATE 0x00 -#define HASH_LAST 0x01 -#define HASH_DONE 0x02 -#define HASH_FINAL 0x04 - -#define HASH_CTX_STS_IDLE 0x00 -#define HASH_CTX_STS_PROCESSING 0x01 -#define HASH_CTX_STS_LAST 0x02 -#define HASH_CTX_STS_COMPLETE 0x04 - -enum hash_ctx_error { - HASH_CTX_ERROR_NONE = 0, - HASH_CTX_ERROR_INVALID_FLAGS = -1, - HASH_CTX_ERROR_ALREADY_PROCESSING = -2, - HASH_CTX_ERROR_ALREADY_COMPLETED = -3, - -#ifdef HASH_CTX_DEBUG - HASH_CTX_ERROR_DEBUG_DIGEST_MISMATCH = -4, -#endif -}; - - -#define hash_ctx_user_data(ctx) ((ctx)->user_data) -#define hash_ctx_digest(ctx) ((ctx)->job.result_digest) -#define hash_ctx_processing(ctx) ((ctx)->status & HASH_CTX_STS_PROCESSING) -#define hash_ctx_complete(ctx) ((ctx)->status == HASH_CTX_STS_COMPLETE) -#define hash_ctx_status(ctx) ((ctx)->status) -#define hash_ctx_error(ctx) ((ctx)->error) -#define hash_ctx_init(ctx) \ - do { \ - (ctx)->error = HASH_CTX_ERROR_NONE; \ - (ctx)->status = HASH_CTX_STS_COMPLETE; \ - } while (0) - - -/* Hash Constants and Typedefs */ -#define SHA256_DIGEST_LENGTH 8 -#define SHA256_LOG2_BLOCK_SIZE 6 - -#define SHA256_PADLENGTHFIELD_SIZE 8 - -#ifdef SHA_MB_DEBUG -#define assert(expr) \ -do { \ - if (unlikely(!(expr))) { \ - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } \ -} while (0) -#else -#define assert(expr) do {} while (0) -#endif - -struct sha256_ctx_mgr { - struct sha256_mb_mgr mgr; -}; - -/* typedef struct sha256_ctx_mgr sha256_ctx_mgr; */ - -struct sha256_hash_ctx { - /* Must be at struct offset 0 */ - struct job_sha256 job; - /* status flag */ - int status; - /* error flag */ - int error; - - uint64_t total_length; - const void *incoming_buffer; - uint32_t incoming_buffer_length; - uint8_t partial_block_buffer[SHA256_BLOCK_SIZE * 2]; - uint32_t partial_block_buffer_length; - void *user_data; -}; - -#endif diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr.h b/arch/x86/crypto/sha256-mb/sha256_mb_mgr.h deleted file mode 100644 index b01ae40..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Header file for multi buffer SHA256 algorithm manager - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#ifndef __SHA_MB_MGR_H -#define __SHA_MB_MGR_H - -#include <linux/types.h> - -#define NUM_SHA256_DIGEST_WORDS 8 - -enum job_sts { STS_UNKNOWN = 0, - STS_BEING_PROCESSED = 1, - STS_COMPLETED = 2, - STS_INTERNAL_ERROR = 3, - STS_ERROR = 4 -}; - -struct job_sha256 { - u8 *buffer; - u32 len; - u32 result_digest[NUM_SHA256_DIGEST_WORDS] __aligned(32); - enum job_sts status; - void *user_data; -}; - -/* SHA256 out-of-order scheduler */ - -/* typedef uint32_t sha8_digest_array[8][8]; */ - -struct sha256_args_x8 { - uint32_t digest[8][8]; - uint8_t *data_ptr[8]; -}; - -struct sha256_lane_data { - struct job_sha256 *job_in_lane; -}; - -struct sha256_mb_mgr { - struct sha256_args_x8 args; - - uint32_t lens[8]; - - /* each byte is index (0...7) of unused lanes */ - uint64_t unused_lanes; - /* byte 4 is set to FF as a flag */ - struct sha256_lane_data ldata[8]; -}; - - -#define SHA256_MB_MGR_NUM_LANES_AVX2 8 - -void sha256_mb_mgr_init_avx2(struct sha256_mb_mgr *state); -struct job_sha256 *sha256_mb_mgr_submit_avx2(struct sha256_mb_mgr *state, - struct job_sha256 *job); -struct job_sha256 *sha256_mb_mgr_flush_avx2(struct sha256_mb_mgr *state); -struct job_sha256 *sha256_mb_mgr_get_comp_job_avx2(struct sha256_mb_mgr *state); - -#endif diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_datastruct.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_datastruct.S deleted file mode 100644 index 5c377ba..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_datastruct.S +++ /dev/null @@ -1,304 +0,0 @@ -/* - * Header file for multi buffer SHA256 algorithm data structure - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -# Macros for defining data structures - -# Usage example - -#START_FIELDS # JOB_AES -### name size align -#FIELD _plaintext, 8, 8 # pointer to plaintext -#FIELD _ciphertext, 8, 8 # pointer to ciphertext -#FIELD _IV, 16, 8 # IV -#FIELD _keys, 8, 8 # pointer to keys -#FIELD _len, 4, 4 # length in bytes -#FIELD _status, 4, 4 # status enumeration -#FIELD _user_data, 8, 8 # pointer to user data -#UNION _union, size1, align1, \ -# size2, align2, \ -# size3, align3, \ -# ... -#END_FIELDS -#%assign _JOB_AES_size _FIELD_OFFSET -#%assign _JOB_AES_align _STRUCT_ALIGN - -######################################################################### - -# Alternate "struc-like" syntax: -# STRUCT job_aes2 -# RES_Q .plaintext, 1 -# RES_Q .ciphertext, 1 -# RES_DQ .IV, 1 -# RES_B .nested, _JOB_AES_SIZE, _JOB_AES_ALIGN -# RES_U .union, size1, align1, \ -# size2, align2, \ -# ... -# ENDSTRUCT -# # Following only needed if nesting -# %assign job_aes2_size _FIELD_OFFSET -# %assign job_aes2_align _STRUCT_ALIGN -# -# RES_* macros take a name, a count and an optional alignment. -# The count in in terms of the base size of the macro, and the -# default alignment is the base size. -# The macros are: -# Macro Base size -# RES_B 1 -# RES_W 2 -# RES_D 4 -# RES_Q 8 -# RES_DQ 16 -# RES_Y 32 -# RES_Z 64 -# -# RES_U defines a union. It's arguments are a name and two or more -# pairs of "size, alignment" -# -# The two assigns are only needed if this structure is being nested -# within another. Even if the assigns are not done, one can still use -# STRUCT_NAME_size as the size of the structure. -# -# Note that for nesting, you still need to assign to STRUCT_NAME_size. -# -# The differences between this and using "struc" directly are that each -# type is implicitly aligned to its natural length (although this can be -# over-ridden with an explicit third parameter), and that the structure -# is padded at the end to its overall alignment. -# - -######################################################################### - -#ifndef _DATASTRUCT_ASM_ -#define _DATASTRUCT_ASM_ - -#define SZ8 8*SHA256_DIGEST_WORD_SIZE -#define ROUNDS 64*SZ8 -#define PTR_SZ 8 -#define SHA256_DIGEST_WORD_SIZE 4 -#define MAX_SHA256_LANES 8 -#define SHA256_DIGEST_WORDS 8 -#define SHA256_DIGEST_ROW_SIZE (MAX_SHA256_LANES * SHA256_DIGEST_WORD_SIZE) -#define SHA256_DIGEST_SIZE (SHA256_DIGEST_ROW_SIZE * SHA256_DIGEST_WORDS) -#define SHA256_BLK_SZ 64 - -# START_FIELDS -.macro START_FIELDS - _FIELD_OFFSET = 0 - _STRUCT_ALIGN = 0 -.endm - -# FIELD name size align -.macro FIELD name size align - _FIELD_OFFSET = (_FIELD_OFFSET + (\align) - 1) & (~ ((\align)-1)) - \name = _FIELD_OFFSET - _FIELD_OFFSET = _FIELD_OFFSET + (\size) -.if (\align > _STRUCT_ALIGN) - _STRUCT_ALIGN = \align -.endif -.endm - -# END_FIELDS -.macro END_FIELDS - _FIELD_OFFSET = (_FIELD_OFFSET + _STRUCT_ALIGN-1) & (~ (_STRUCT_ALIGN-1)) -.endm - -######################################################################## - -.macro STRUCT p1 -START_FIELDS -.struc \p1 -.endm - -.macro ENDSTRUCT - tmp = _FIELD_OFFSET - END_FIELDS - tmp = (_FIELD_OFFSET - %%tmp) -.if (tmp > 0) - .lcomm tmp -.endif -.endstruc -.endm - -## RES_int name size align -.macro RES_int p1 p2 p3 - name = \p1 - size = \p2 - align = .\p3 - - _FIELD_OFFSET = (_FIELD_OFFSET + (align) - 1) & (~ ((align)-1)) -.align align -.lcomm name size - _FIELD_OFFSET = _FIELD_OFFSET + (size) -.if (align > _STRUCT_ALIGN) - _STRUCT_ALIGN = align -.endif -.endm - -# macro RES_B name, size [, align] -.macro RES_B _name, _size, _align=1 -RES_int _name _size _align -.endm - -# macro RES_W name, size [, align] -.macro RES_W _name, _size, _align=2 -RES_int _name 2*(_size) _align -.endm - -# macro RES_D name, size [, align] -.macro RES_D _name, _size, _align=4 -RES_int _name 4*(_size) _align -.endm - -# macro RES_Q name, size [, align] -.macro RES_Q _name, _size, _align=8 -RES_int _name 8*(_size) _align -.endm - -# macro RES_DQ name, size [, align] -.macro RES_DQ _name, _size, _align=16 -RES_int _name 16*(_size) _align -.endm - -# macro RES_Y name, size [, align] -.macro RES_Y _name, _size, _align=32 -RES_int _name 32*(_size) _align -.endm - -# macro RES_Z name, size [, align] -.macro RES_Z _name, _size, _align=64 -RES_int _name 64*(_size) _align -.endm - -#endif - - -######################################################################## -#### Define SHA256 Out Of Order Data Structures -######################################################################## - -START_FIELDS # LANE_DATA -### name size align -FIELD _job_in_lane, 8, 8 # pointer to job object -END_FIELDS - - _LANE_DATA_size = _FIELD_OFFSET - _LANE_DATA_align = _STRUCT_ALIGN - -######################################################################## - -START_FIELDS # SHA256_ARGS_X4 -### name size align -FIELD _digest, 4*8*8, 4 # transposed digest -FIELD _data_ptr, 8*8, 8 # array of pointers to data -END_FIELDS - - _SHA256_ARGS_X4_size = _FIELD_OFFSET - _SHA256_ARGS_X4_align = _STRUCT_ALIGN - _SHA256_ARGS_X8_size = _FIELD_OFFSET - _SHA256_ARGS_X8_align = _STRUCT_ALIGN - -####################################################################### - -START_FIELDS # MB_MGR -### name size align -FIELD _args, _SHA256_ARGS_X4_size, _SHA256_ARGS_X4_align -FIELD _lens, 4*8, 8 -FIELD _unused_lanes, 8, 8 -FIELD _ldata, _LANE_DATA_size*8, _LANE_DATA_align -END_FIELDS - - _MB_MGR_size = _FIELD_OFFSET - _MB_MGR_align = _STRUCT_ALIGN - -_args_digest = _args + _digest -_args_data_ptr = _args + _data_ptr - -####################################################################### - -START_FIELDS #STACK_FRAME -### name size align -FIELD _data, 16*SZ8, 1 # transposed digest -FIELD _digest, 8*SZ8, 1 # array of pointers to data -FIELD _ytmp, 4*SZ8, 1 -FIELD _rsp, 8, 1 -END_FIELDS - - _STACK_FRAME_size = _FIELD_OFFSET - _STACK_FRAME_align = _STRUCT_ALIGN - -####################################################################### - -######################################################################## -#### Define constants -######################################################################## - -#define STS_UNKNOWN 0 -#define STS_BEING_PROCESSED 1 -#define STS_COMPLETED 2 - -######################################################################## -#### Define JOB_SHA256 structure -######################################################################## - -START_FIELDS # JOB_SHA256 - -### name size align -FIELD _buffer, 8, 8 # pointer to buffer -FIELD _len, 8, 8 # length in bytes -FIELD _result_digest, 8*4, 32 # Digest (output) -FIELD _status, 4, 4 -FIELD _user_data, 8, 8 -END_FIELDS - - _JOB_SHA256_size = _FIELD_OFFSET - _JOB_SHA256_align = _STRUCT_ALIGN diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S deleted file mode 100644 index d2364c5..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_flush_avx2.S +++ /dev/null @@ -1,307 +0,0 @@ -/* - * Flush routine for SHA256 multibuffer - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha256_mb_mgr_datastruct.S" - -.extern sha256_x8_avx2 - -#LINUX register definitions -#define arg1 %rdi -#define arg2 %rsi - -# Common register definitions -#define state arg1 -#define job arg2 -#define len2 arg2 - -# idx must be a register not clobberred by sha1_mult -#define idx %r8 -#define DWORD_idx %r8d - -#define unused_lanes %rbx -#define lane_data %rbx -#define tmp2 %rbx -#define tmp2_w %ebx - -#define job_rax %rax -#define tmp1 %rax -#define size_offset %rax -#define tmp %rax -#define start_offset %rax - -#define tmp3 %arg1 - -#define extra_blocks %arg2 -#define p %arg2 - -.macro LABEL prefix n -\prefix\n\(): -.endm - -.macro JNE_SKIP i -jne skip_\i -.endm - -.altmacro -.macro SET_OFFSET _offset -offset = \_offset -.endm -.noaltmacro - -# JOB_SHA256* sha256_mb_mgr_flush_avx2(MB_MGR *state) -# arg 1 : rcx : state -ENTRY(sha256_mb_mgr_flush_avx2) - FRAME_BEGIN - push %rbx - - # If bit (32+3) is set, then all lanes are empty - mov _unused_lanes(state), unused_lanes - bt $32+3, unused_lanes - jc return_null - - # find a lane with a non-null job - xor idx, idx - offset = (_ldata + 1 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne one(%rip), idx - offset = (_ldata + 2 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne two(%rip), idx - offset = (_ldata + 3 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne three(%rip), idx - offset = (_ldata + 4 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne four(%rip), idx - offset = (_ldata + 5 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne five(%rip), idx - offset = (_ldata + 6 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne six(%rip), idx - offset = (_ldata + 7 * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne seven(%rip), idx - - # copy idx to empty lanes -copy_lane_data: - offset = (_args + _data_ptr) - mov offset(state,idx,8), tmp - - I = 0 -.rep 8 - offset = (_ldata + I * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) -.altmacro - JNE_SKIP %I - offset = (_args + _data_ptr + 8*I) - mov tmp, offset(state) - offset = (_lens + 4*I) - movl $0xFFFFFFFF, offset(state) -LABEL skip_ %I - I = (I+1) -.noaltmacro -.endr - - # Find min length - vmovdqu _lens+0*16(state), %xmm0 - vmovdqu _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min val in low dword - - vmovd %xmm2, DWORD_idx - mov idx, len2 - and $0xF, idx - shr $4, len2 - jz len_is_0 - - vpand clear_low_nibble(%rip), %xmm2, %xmm2 - vpshufd $0, %xmm2, %xmm2 - - vpsubd %xmm2, %xmm0, %xmm0 - vpsubd %xmm2, %xmm1, %xmm1 - - vmovdqu %xmm0, _lens+0*16(state) - vmovdqu %xmm1, _lens+1*16(state) - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha256_x8_avx2 - # state and idx are intact - -len_is_0: - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $4, unused_lanes - or idx, unused_lanes - - mov unused_lanes, _unused_lanes(state) - movl $0xFFFFFFFF, _lens(state,idx,4) - - vmovd _args_digest(state , idx, 4) , %xmm0 - vpinsrd $1, _args_digest+1*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state, idx, 4), %xmm0, %xmm0 - vmovd _args_digest+4*32(state, idx, 4), %xmm1 - vpinsrd $1, _args_digest+5*32(state, idx, 4), %xmm1, %xmm1 - vpinsrd $2, _args_digest+6*32(state, idx, 4), %xmm1, %xmm1 - vpinsrd $3, _args_digest+7*32(state, idx, 4), %xmm1, %xmm1 - - vmovdqu %xmm0, _result_digest(job_rax) - offset = (_result_digest + 1*16) - vmovdqu %xmm1, offset(job_rax) - -return: - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return -ENDPROC(sha256_mb_mgr_flush_avx2) - -############################################################################## - -.align 16 -ENTRY(sha256_mb_mgr_get_comp_job_avx2) - push %rbx - - ## if bit 32+3 is set, then all lanes are empty - mov _unused_lanes(state), unused_lanes - bt $(32+3), unused_lanes - jc .return_null - - # Find min length - vmovdqu _lens(state), %xmm0 - vmovdqu _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min val in low dword - - vmovd %xmm2, DWORD_idx - test $~0xF, idx - jnz .return_null - - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $4, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens(state, idx, 4) - - vmovd _args_digest(state, idx, 4), %xmm0 - vpinsrd $1, _args_digest+1*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state, idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state, idx, 4), %xmm0, %xmm0 - vmovd _args_digest+4*32(state, idx, 4), %xmm1 - vpinsrd $1, _args_digest+5*32(state, idx, 4), %xmm1, %xmm1 - vpinsrd $2, _args_digest+6*32(state, idx, 4), %xmm1, %xmm1 - vpinsrd $3, _args_digest+7*32(state, idx, 4), %xmm1, %xmm1 - - vmovdqu %xmm0, _result_digest(job_rax) - offset = (_result_digest + 1*16) - vmovdqu %xmm1, offset(job_rax) - - pop %rbx - - ret - -.return_null: - xor job_rax, job_rax - pop %rbx - ret -ENDPROC(sha256_mb_mgr_get_comp_job_avx2) - -.section .rodata.cst16.clear_low_nibble, "aM", @progbits, 16 -.align 16 -clear_low_nibble: -.octa 0x000000000000000000000000FFFFFFF0 - -.section .rodata.cst8, "aM", @progbits, 8 -.align 8 -one: -.quad 1 -two: -.quad 2 -three: -.quad 3 -four: -.quad 4 -five: -.quad 5 -six: -.quad 6 -seven: -.quad 7 diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_init_avx2.c b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_init_avx2.c deleted file mode 100644 index b0c4983..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_init_avx2.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * Initialization code for multi buffer SHA256 algorithm for AVX2 - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "sha256_mb_mgr.h" - -void sha256_mb_mgr_init_avx2(struct sha256_mb_mgr *state) -{ - unsigned int j; - - state->unused_lanes = 0xF76543210ULL; - for (j = 0; j < 8; j++) { - state->lens[j] = 0xFFFFFFFF; - state->ldata[j].job_in_lane = NULL; - } -} diff --git a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_submit_avx2.S b/arch/x86/crypto/sha256-mb/sha256_mb_mgr_submit_avx2.S deleted file mode 100644 index b36ae74..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_mb_mgr_submit_avx2.S +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Buffer submit code for multi buffer SHA256 algorithm - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha256_mb_mgr_datastruct.S" - -.extern sha256_x8_avx2 - -# LINUX register definitions -arg1 = %rdi -arg2 = %rsi -size_offset = %rcx -tmp2 = %rcx -extra_blocks = %rdx - -# Common definitions -#define state arg1 -#define job %rsi -#define len2 arg2 -#define p2 arg2 - -# idx must be a register not clobberred by sha1_x8_avx2 -idx = %r8 -DWORD_idx = %r8d -last_len = %r8 - -p = %r11 -start_offset = %r11 - -unused_lanes = %rbx -BYTE_unused_lanes = %bl - -job_rax = %rax -len = %rax -DWORD_len = %eax - -lane = %r12 -tmp3 = %r12 - -tmp = %r9 -DWORD_tmp = %r9d - -lane_data = %r10 - -# JOB* sha256_mb_mgr_submit_avx2(MB_MGR *state, JOB_SHA256 *job) -# arg 1 : rcx : state -# arg 2 : rdx : job -ENTRY(sha256_mb_mgr_submit_avx2) - FRAME_BEGIN - push %rbx - push %r12 - - mov _unused_lanes(state), unused_lanes - mov unused_lanes, lane - and $0xF, lane - shr $4, unused_lanes - imul $_LANE_DATA_size, lane, lane_data - movl $STS_BEING_PROCESSED, _status(job) - lea _ldata(state, lane_data), lane_data - mov unused_lanes, _unused_lanes(state) - movl _len(job), DWORD_len - - mov job, _job_in_lane(lane_data) - shl $4, len - or lane, len - - movl DWORD_len, _lens(state , lane, 4) - - # Load digest words from result_digest - vmovdqu _result_digest(job), %xmm0 - vmovdqu _result_digest+1*16(job), %xmm1 - vmovd %xmm0, _args_digest(state, lane, 4) - vpextrd $1, %xmm0, _args_digest+1*32(state , lane, 4) - vpextrd $2, %xmm0, _args_digest+2*32(state , lane, 4) - vpextrd $3, %xmm0, _args_digest+3*32(state , lane, 4) - vmovd %xmm1, _args_digest+4*32(state , lane, 4) - - vpextrd $1, %xmm1, _args_digest+5*32(state , lane, 4) - vpextrd $2, %xmm1, _args_digest+6*32(state , lane, 4) - vpextrd $3, %xmm1, _args_digest+7*32(state , lane, 4) - - mov _buffer(job), p - mov p, _args_data_ptr(state, lane, 8) - - cmp $0xF, unused_lanes - jne return_null - -start_loop: - # Find min length - vmovdqa _lens(state), %xmm0 - vmovdqa _lens+1*16(state), %xmm1 - - vpminud %xmm1, %xmm0, %xmm2 # xmm2 has {D,C,B,A} - vpalignr $8, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,D,C} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has {x,x,E,F} - vpalignr $4, %xmm2, %xmm3, %xmm3 # xmm3 has {x,x,x,E} - vpminud %xmm3, %xmm2, %xmm2 # xmm2 has min val in low dword - - vmovd %xmm2, DWORD_idx - mov idx, len2 - and $0xF, idx - shr $4, len2 - jz len_is_0 - - vpand clear_low_nibble(%rip), %xmm2, %xmm2 - vpshufd $0, %xmm2, %xmm2 - - vpsubd %xmm2, %xmm0, %xmm0 - vpsubd %xmm2, %xmm1, %xmm1 - - vmovdqa %xmm0, _lens + 0*16(state) - vmovdqa %xmm1, _lens + 1*16(state) - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha256_x8_avx2 - - # state and idx are intact - -len_is_0: - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - mov _unused_lanes(state), unused_lanes - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - shl $4, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens(state,idx,4) - - vmovd _args_digest(state, idx, 4), %xmm0 - vpinsrd $1, _args_digest+1*32(state , idx, 4), %xmm0, %xmm0 - vpinsrd $2, _args_digest+2*32(state , idx, 4), %xmm0, %xmm0 - vpinsrd $3, _args_digest+3*32(state , idx, 4), %xmm0, %xmm0 - vmovd _args_digest+4*32(state, idx, 4), %xmm1 - - vpinsrd $1, _args_digest+5*32(state , idx, 4), %xmm1, %xmm1 - vpinsrd $2, _args_digest+6*32(state , idx, 4), %xmm1, %xmm1 - vpinsrd $3, _args_digest+7*32(state , idx, 4), %xmm1, %xmm1 - - vmovdqu %xmm0, _result_digest(job_rax) - vmovdqu %xmm1, _result_digest+1*16(job_rax) - -return: - pop %r12 - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return - -ENDPROC(sha256_mb_mgr_submit_avx2) - -.section .rodata.cst16.clear_low_nibble, "aM", @progbits, 16 -.align 16 -clear_low_nibble: - .octa 0x000000000000000000000000FFFFFFF0 diff --git a/arch/x86/crypto/sha256-mb/sha256_x8_avx2.S b/arch/x86/crypto/sha256-mb/sha256_x8_avx2.S deleted file mode 100644 index 1687c80..00000000 --- a/arch/x86/crypto/sha256-mb/sha256_x8_avx2.S +++ /dev/null @@ -1,598 +0,0 @@ -/* - * Multi-buffer SHA256 algorithm hash compute routine - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include "sha256_mb_mgr_datastruct.S" - -## code to compute oct SHA256 using SSE-256 -## outer calling routine takes care of save and restore of XMM registers -## Logic designed/laid out by JDG - -## Function clobbers: rax, rcx, rdx, rbx, rsi, rdi, r9-r15; %ymm0-15 -## Linux clobbers: rax rbx rcx rdx rsi r9 r10 r11 r12 r13 r14 r15 -## Linux preserves: rdi rbp r8 -## -## clobbers %ymm0-15 - -arg1 = %rdi -arg2 = %rsi -reg3 = %rcx -reg4 = %rdx - -# Common definitions -STATE = arg1 -INP_SIZE = arg2 - -IDX = %rax -ROUND = %rbx -TBL = reg3 - -inp0 = %r9 -inp1 = %r10 -inp2 = %r11 -inp3 = %r12 -inp4 = %r13 -inp5 = %r14 -inp6 = %r15 -inp7 = reg4 - -a = %ymm0 -b = %ymm1 -c = %ymm2 -d = %ymm3 -e = %ymm4 -f = %ymm5 -g = %ymm6 -h = %ymm7 - -T1 = %ymm8 - -a0 = %ymm12 -a1 = %ymm13 -a2 = %ymm14 -TMP = %ymm15 -TMP0 = %ymm6 -TMP1 = %ymm7 - -TT0 = %ymm8 -TT1 = %ymm9 -TT2 = %ymm10 -TT3 = %ymm11 -TT4 = %ymm12 -TT5 = %ymm13 -TT6 = %ymm14 -TT7 = %ymm15 - -# Define stack usage - -# Assume stack aligned to 32 bytes before call -# Therefore FRAMESZ mod 32 must be 32-8 = 24 - -#define FRAMESZ 0x388 - -#define VMOVPS vmovups - -# TRANSPOSE8 r0, r1, r2, r3, r4, r5, r6, r7, t0, t1 -# "transpose" data in {r0...r7} using temps {t0...t1} -# Input looks like: {r0 r1 r2 r3 r4 r5 r6 r7} -# r0 = {a7 a6 a5 a4 a3 a2 a1 a0} -# r1 = {b7 b6 b5 b4 b3 b2 b1 b0} -# r2 = {c7 c6 c5 c4 c3 c2 c1 c0} -# r3 = {d7 d6 d5 d4 d3 d2 d1 d0} -# r4 = {e7 e6 e5 e4 e3 e2 e1 e0} -# r5 = {f7 f6 f5 f4 f3 f2 f1 f0} -# r6 = {g7 g6 g5 g4 g3 g2 g1 g0} -# r7 = {h7 h6 h5 h4 h3 h2 h1 h0} -# -# Output looks like: {r0 r1 r2 r3 r4 r5 r6 r7} -# r0 = {h0 g0 f0 e0 d0 c0 b0 a0} -# r1 = {h1 g1 f1 e1 d1 c1 b1 a1} -# r2 = {h2 g2 f2 e2 d2 c2 b2 a2} -# r3 = {h3 g3 f3 e3 d3 c3 b3 a3} -# r4 = {h4 g4 f4 e4 d4 c4 b4 a4} -# r5 = {h5 g5 f5 e5 d5 c5 b5 a5} -# r6 = {h6 g6 f6 e6 d6 c6 b6 a6} -# r7 = {h7 g7 f7 e7 d7 c7 b7 a7} -# - -.macro TRANSPOSE8 r0 r1 r2 r3 r4 r5 r6 r7 t0 t1 - # process top half (r0..r3) {a...d} - vshufps $0x44, \r1, \r0, \t0 # t0 = {b5 b4 a5 a4 b1 b0 a1 a0} - vshufps $0xEE, \r1, \r0, \r0 # r0 = {b7 b6 a7 a6 b3 b2 a3 a2} - vshufps $0x44, \r3, \r2, \t1 # t1 = {d5 d4 c5 c4 d1 d0 c1 c0} - vshufps $0xEE, \r3, \r2, \r2 # r2 = {d7 d6 c7 c6 d3 d2 c3 c2} - vshufps $0xDD, \t1, \t0, \r3 # r3 = {d5 c5 b5 a5 d1 c1 b1 a1} - vshufps $0x88, \r2, \r0, \r1 # r1 = {d6 c6 b6 a6 d2 c2 b2 a2} - vshufps $0xDD, \r2, \r0, \r0 # r0 = {d7 c7 b7 a7 d3 c3 b3 a3} - vshufps $0x88, \t1, \t0, \t0 # t0 = {d4 c4 b4 a4 d0 c0 b0 a0} - - # use r2 in place of t0 - # process bottom half (r4..r7) {e...h} - vshufps $0x44, \r5, \r4, \r2 # r2 = {f5 f4 e5 e4 f1 f0 e1 e0} - vshufps $0xEE, \r5, \r4, \r4 # r4 = {f7 f6 e7 e6 f3 f2 e3 e2} - vshufps $0x44, \r7, \r6, \t1 # t1 = {h5 h4 g5 g4 h1 h0 g1 g0} - vshufps $0xEE, \r7, \r6, \r6 # r6 = {h7 h6 g7 g6 h3 h2 g3 g2} - vshufps $0xDD, \t1, \r2, \r7 # r7 = {h5 g5 f5 e5 h1 g1 f1 e1} - vshufps $0x88, \r6, \r4, \r5 # r5 = {h6 g6 f6 e6 h2 g2 f2 e2} - vshufps $0xDD, \r6, \r4, \r4 # r4 = {h7 g7 f7 e7 h3 g3 f3 e3} - vshufps $0x88, \t1, \r2, \t1 # t1 = {h4 g4 f4 e4 h0 g0 f0 e0} - - vperm2f128 $0x13, \r1, \r5, \r6 # h6...a6 - vperm2f128 $0x02, \r1, \r5, \r2 # h2...a2 - vperm2f128 $0x13, \r3, \r7, \r5 # h5...a5 - vperm2f128 $0x02, \r3, \r7, \r1 # h1...a1 - vperm2f128 $0x13, \r0, \r4, \r7 # h7...a7 - vperm2f128 $0x02, \r0, \r4, \r3 # h3...a3 - vperm2f128 $0x13, \t0, \t1, \r4 # h4...a4 - vperm2f128 $0x02, \t0, \t1, \r0 # h0...a0 - -.endm - -.macro ROTATE_ARGS -TMP_ = h -h = g -g = f -f = e -e = d -d = c -c = b -b = a -a = TMP_ -.endm - -.macro _PRORD reg imm tmp - vpslld $(32-\imm),\reg,\tmp - vpsrld $\imm,\reg, \reg - vpor \tmp,\reg, \reg -.endm - -# PRORD_nd reg, imm, tmp, src -.macro _PRORD_nd reg imm tmp src - vpslld $(32-\imm), \src, \tmp - vpsrld $\imm, \src, \reg - vpor \tmp, \reg, \reg -.endm - -# PRORD dst/src, amt -.macro PRORD reg imm - _PRORD \reg,\imm,TMP -.endm - -# PRORD_nd dst, src, amt -.macro PRORD_nd reg tmp imm - _PRORD_nd \reg, \imm, TMP, \tmp -.endm - -# arguments passed implicitly in preprocessor symbols i, a...h -.macro ROUND_00_15 _T1 i - PRORD_nd a0,e,5 # sig1: a0 = (e >> 5) - - vpxor g, f, a2 # ch: a2 = f^g - vpand e,a2, a2 # ch: a2 = (f^g)&e - vpxor g, a2, a2 # a2 = ch - - PRORD_nd a1,e,25 # sig1: a1 = (e >> 25) - - vmovdqu \_T1,(SZ8*(\i & 0xf))(%rsp) - vpaddd (TBL,ROUND,1), \_T1, \_T1 # T1 = W + K - vpxor e,a0, a0 # sig1: a0 = e ^ (e >> 5) - PRORD a0, 6 # sig1: a0 = (e >> 6) ^ (e >> 11) - vpaddd a2, h, h # h = h + ch - PRORD_nd a2,a,11 # sig0: a2 = (a >> 11) - vpaddd \_T1,h, h # h = h + ch + W + K - vpxor a1, a0, a0 # a0 = sigma1 - PRORD_nd a1,a,22 # sig0: a1 = (a >> 22) - vpxor c, a, \_T1 # maj: T1 = a^c - add $SZ8, ROUND # ROUND++ - vpand b, \_T1, \_T1 # maj: T1 = (a^c)&b - vpaddd a0, h, h - vpaddd h, d, d - vpxor a, a2, a2 # sig0: a2 = a ^ (a >> 11) - PRORD a2,2 # sig0: a2 = (a >> 2) ^ (a >> 13) - vpxor a1, a2, a2 # a2 = sig0 - vpand c, a, a1 # maj: a1 = a&c - vpor \_T1, a1, a1 # a1 = maj - vpaddd a1, h, h # h = h + ch + W + K + maj - vpaddd a2, h, h # h = h + ch + W + K + maj + sigma0 - ROTATE_ARGS -.endm - -# arguments passed implicitly in preprocessor symbols i, a...h -.macro ROUND_16_XX _T1 i - vmovdqu (SZ8*((\i-15)&0xf))(%rsp), \_T1 - vmovdqu (SZ8*((\i-2)&0xf))(%rsp), a1 - vmovdqu \_T1, a0 - PRORD \_T1,11 - vmovdqu a1, a2 - PRORD a1,2 - vpxor a0, \_T1, \_T1 - PRORD \_T1, 7 - vpxor a2, a1, a1 - PRORD a1, 17 - vpsrld $3, a0, a0 - vpxor a0, \_T1, \_T1 - vpsrld $10, a2, a2 - vpxor a2, a1, a1 - vpaddd (SZ8*((\i-16)&0xf))(%rsp), \_T1, \_T1 - vpaddd (SZ8*((\i-7)&0xf))(%rsp), a1, a1 - vpaddd a1, \_T1, \_T1 - - ROUND_00_15 \_T1,\i -.endm - -# SHA256_ARGS: -# UINT128 digest[8]; // transposed digests -# UINT8 *data_ptr[4]; - -# void sha256_x8_avx2(SHA256_ARGS *args, UINT64 bytes); -# arg 1 : STATE : pointer to array of pointers to input data -# arg 2 : INP_SIZE : size of input in blocks - # general registers preserved in outer calling routine - # outer calling routine saves all the XMM registers - # save rsp, allocate 32-byte aligned for local variables -ENTRY(sha256_x8_avx2) - - # save callee-saved clobbered registers to comply with C function ABI - push %r12 - push %r13 - push %r14 - push %r15 - - mov %rsp, IDX - sub $FRAMESZ, %rsp - and $~0x1F, %rsp - mov IDX, _rsp(%rsp) - - # Load the pre-transposed incoming digest. - vmovdqu 0*SHA256_DIGEST_ROW_SIZE(STATE),a - vmovdqu 1*SHA256_DIGEST_ROW_SIZE(STATE),b - vmovdqu 2*SHA256_DIGEST_ROW_SIZE(STATE),c - vmovdqu 3*SHA256_DIGEST_ROW_SIZE(STATE),d - vmovdqu 4*SHA256_DIGEST_ROW_SIZE(STATE),e - vmovdqu 5*SHA256_DIGEST_ROW_SIZE(STATE),f - vmovdqu 6*SHA256_DIGEST_ROW_SIZE(STATE),g - vmovdqu 7*SHA256_DIGEST_ROW_SIZE(STATE),h - - lea K256_8(%rip),TBL - - # load the address of each of the 4 message lanes - # getting ready to transpose input onto stack - mov _args_data_ptr+0*PTR_SZ(STATE),inp0 - mov _args_data_ptr+1*PTR_SZ(STATE),inp1 - mov _args_data_ptr+2*PTR_SZ(STATE),inp2 - mov _args_data_ptr+3*PTR_SZ(STATE),inp3 - mov _args_data_ptr+4*PTR_SZ(STATE),inp4 - mov _args_data_ptr+5*PTR_SZ(STATE),inp5 - mov _args_data_ptr+6*PTR_SZ(STATE),inp6 - mov _args_data_ptr+7*PTR_SZ(STATE),inp7 - - xor IDX, IDX -lloop: - xor ROUND, ROUND - - # save old digest - vmovdqu a, _digest(%rsp) - vmovdqu b, _digest+1*SZ8(%rsp) - vmovdqu c, _digest+2*SZ8(%rsp) - vmovdqu d, _digest+3*SZ8(%rsp) - vmovdqu e, _digest+4*SZ8(%rsp) - vmovdqu f, _digest+5*SZ8(%rsp) - vmovdqu g, _digest+6*SZ8(%rsp) - vmovdqu h, _digest+7*SZ8(%rsp) - i = 0 -.rep 2 - VMOVPS i*32(inp0, IDX), TT0 - VMOVPS i*32(inp1, IDX), TT1 - VMOVPS i*32(inp2, IDX), TT2 - VMOVPS i*32(inp3, IDX), TT3 - VMOVPS i*32(inp4, IDX), TT4 - VMOVPS i*32(inp5, IDX), TT5 - VMOVPS i*32(inp6, IDX), TT6 - VMOVPS i*32(inp7, IDX), TT7 - vmovdqu g, _ytmp(%rsp) - vmovdqu h, _ytmp+1*SZ8(%rsp) - TRANSPOSE8 TT0, TT1, TT2, TT3, TT4, TT5, TT6, TT7, TMP0, TMP1 - vmovdqu PSHUFFLE_BYTE_FLIP_MASK(%rip), TMP1 - vmovdqu _ytmp(%rsp), g - vpshufb TMP1, TT0, TT0 - vpshufb TMP1, TT1, TT1 - vpshufb TMP1, TT2, TT2 - vpshufb TMP1, TT3, TT3 - vpshufb TMP1, TT4, TT4 - vpshufb TMP1, TT5, TT5 - vpshufb TMP1, TT6, TT6 - vpshufb TMP1, TT7, TT7 - vmovdqu _ytmp+1*SZ8(%rsp), h - vmovdqu TT4, _ytmp(%rsp) - vmovdqu TT5, _ytmp+1*SZ8(%rsp) - vmovdqu TT6, _ytmp+2*SZ8(%rsp) - vmovdqu TT7, _ytmp+3*SZ8(%rsp) - ROUND_00_15 TT0,(i*8+0) - vmovdqu _ytmp(%rsp), TT0 - ROUND_00_15 TT1,(i*8+1) - vmovdqu _ytmp+1*SZ8(%rsp), TT1 - ROUND_00_15 TT2,(i*8+2) - vmovdqu _ytmp+2*SZ8(%rsp), TT2 - ROUND_00_15 TT3,(i*8+3) - vmovdqu _ytmp+3*SZ8(%rsp), TT3 - ROUND_00_15 TT0,(i*8+4) - ROUND_00_15 TT1,(i*8+5) - ROUND_00_15 TT2,(i*8+6) - ROUND_00_15 TT3,(i*8+7) - i = (i+1) -.endr - add $64, IDX - i = (i*8) - - jmp Lrounds_16_xx -.align 16 -Lrounds_16_xx: -.rep 16 - ROUND_16_XX T1, i - i = (i+1) -.endr - - cmp $ROUNDS,ROUND - jb Lrounds_16_xx - - # add old digest - vpaddd _digest+0*SZ8(%rsp), a, a - vpaddd _digest+1*SZ8(%rsp), b, b - vpaddd _digest+2*SZ8(%rsp), c, c - vpaddd _digest+3*SZ8(%rsp), d, d - vpaddd _digest+4*SZ8(%rsp), e, e - vpaddd _digest+5*SZ8(%rsp), f, f - vpaddd _digest+6*SZ8(%rsp), g, g - vpaddd _digest+7*SZ8(%rsp), h, h - - sub $1, INP_SIZE # unit is blocks - jne lloop - - # write back to memory (state object) the transposed digest - vmovdqu a, 0*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu b, 1*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu c, 2*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu d, 3*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu e, 4*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu f, 5*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu g, 6*SHA256_DIGEST_ROW_SIZE(STATE) - vmovdqu h, 7*SHA256_DIGEST_ROW_SIZE(STATE) - - # update input pointers - add IDX, inp0 - mov inp0, _args_data_ptr+0*8(STATE) - add IDX, inp1 - mov inp1, _args_data_ptr+1*8(STATE) - add IDX, inp2 - mov inp2, _args_data_ptr+2*8(STATE) - add IDX, inp3 - mov inp3, _args_data_ptr+3*8(STATE) - add IDX, inp4 - mov inp4, _args_data_ptr+4*8(STATE) - add IDX, inp5 - mov inp5, _args_data_ptr+5*8(STATE) - add IDX, inp6 - mov inp6, _args_data_ptr+6*8(STATE) - add IDX, inp7 - mov inp7, _args_data_ptr+7*8(STATE) - - # Postamble - mov _rsp(%rsp), %rsp - - # restore callee-saved clobbered registers - pop %r15 - pop %r14 - pop %r13 - pop %r12 - - ret -ENDPROC(sha256_x8_avx2) - -.section .rodata.K256_8, "a", @progbits -.align 64 -K256_8: - .octa 0x428a2f98428a2f98428a2f98428a2f98 - .octa 0x428a2f98428a2f98428a2f98428a2f98 - .octa 0x71374491713744917137449171374491 - .octa 0x71374491713744917137449171374491 - .octa 0xb5c0fbcfb5c0fbcfb5c0fbcfb5c0fbcf - .octa 0xb5c0fbcfb5c0fbcfb5c0fbcfb5c0fbcf - .octa 0xe9b5dba5e9b5dba5e9b5dba5e9b5dba5 - .octa 0xe9b5dba5e9b5dba5e9b5dba5e9b5dba5 - .octa 0x3956c25b3956c25b3956c25b3956c25b - .octa 0x3956c25b3956c25b3956c25b3956c25b - .octa 0x59f111f159f111f159f111f159f111f1 - .octa 0x59f111f159f111f159f111f159f111f1 - .octa 0x923f82a4923f82a4923f82a4923f82a4 - .octa 0x923f82a4923f82a4923f82a4923f82a4 - .octa 0xab1c5ed5ab1c5ed5ab1c5ed5ab1c5ed5 - .octa 0xab1c5ed5ab1c5ed5ab1c5ed5ab1c5ed5 - .octa 0xd807aa98d807aa98d807aa98d807aa98 - .octa 0xd807aa98d807aa98d807aa98d807aa98 - .octa 0x12835b0112835b0112835b0112835b01 - .octa 0x12835b0112835b0112835b0112835b01 - .octa 0x243185be243185be243185be243185be - .octa 0x243185be243185be243185be243185be - .octa 0x550c7dc3550c7dc3550c7dc3550c7dc3 - .octa 0x550c7dc3550c7dc3550c7dc3550c7dc3 - .octa 0x72be5d7472be5d7472be5d7472be5d74 - .octa 0x72be5d7472be5d7472be5d7472be5d74 - .octa 0x80deb1fe80deb1fe80deb1fe80deb1fe - .octa 0x80deb1fe80deb1fe80deb1fe80deb1fe - .octa 0x9bdc06a79bdc06a79bdc06a79bdc06a7 - .octa 0x9bdc06a79bdc06a79bdc06a79bdc06a7 - .octa 0xc19bf174c19bf174c19bf174c19bf174 - .octa 0xc19bf174c19bf174c19bf174c19bf174 - .octa 0xe49b69c1e49b69c1e49b69c1e49b69c1 - .octa 0xe49b69c1e49b69c1e49b69c1e49b69c1 - .octa 0xefbe4786efbe4786efbe4786efbe4786 - .octa 0xefbe4786efbe4786efbe4786efbe4786 - .octa 0x0fc19dc60fc19dc60fc19dc60fc19dc6 - .octa 0x0fc19dc60fc19dc60fc19dc60fc19dc6 - .octa 0x240ca1cc240ca1cc240ca1cc240ca1cc - .octa 0x240ca1cc240ca1cc240ca1cc240ca1cc - .octa 0x2de92c6f2de92c6f2de92c6f2de92c6f - .octa 0x2de92c6f2de92c6f2de92c6f2de92c6f - .octa 0x4a7484aa4a7484aa4a7484aa4a7484aa - .octa 0x4a7484aa4a7484aa4a7484aa4a7484aa - .octa 0x5cb0a9dc5cb0a9dc5cb0a9dc5cb0a9dc - .octa 0x5cb0a9dc5cb0a9dc5cb0a9dc5cb0a9dc - .octa 0x76f988da76f988da76f988da76f988da - .octa 0x76f988da76f988da76f988da76f988da - .octa 0x983e5152983e5152983e5152983e5152 - .octa 0x983e5152983e5152983e5152983e5152 - .octa 0xa831c66da831c66da831c66da831c66d - .octa 0xa831c66da831c66da831c66da831c66d - .octa 0xb00327c8b00327c8b00327c8b00327c8 - .octa 0xb00327c8b00327c8b00327c8b00327c8 - .octa 0xbf597fc7bf597fc7bf597fc7bf597fc7 - .octa 0xbf597fc7bf597fc7bf597fc7bf597fc7 - .octa 0xc6e00bf3c6e00bf3c6e00bf3c6e00bf3 - .octa 0xc6e00bf3c6e00bf3c6e00bf3c6e00bf3 - .octa 0xd5a79147d5a79147d5a79147d5a79147 - .octa 0xd5a79147d5a79147d5a79147d5a79147 - .octa 0x06ca635106ca635106ca635106ca6351 - .octa 0x06ca635106ca635106ca635106ca6351 - .octa 0x14292967142929671429296714292967 - .octa 0x14292967142929671429296714292967 - .octa 0x27b70a8527b70a8527b70a8527b70a85 - .octa 0x27b70a8527b70a8527b70a8527b70a85 - .octa 0x2e1b21382e1b21382e1b21382e1b2138 - .octa 0x2e1b21382e1b21382e1b21382e1b2138 - .octa 0x4d2c6dfc4d2c6dfc4d2c6dfc4d2c6dfc - .octa 0x4d2c6dfc4d2c6dfc4d2c6dfc4d2c6dfc - .octa 0x53380d1353380d1353380d1353380d13 - .octa 0x53380d1353380d1353380d1353380d13 - .octa 0x650a7354650a7354650a7354650a7354 - .octa 0x650a7354650a7354650a7354650a7354 - .octa 0x766a0abb766a0abb766a0abb766a0abb - .octa 0x766a0abb766a0abb766a0abb766a0abb - .octa 0x81c2c92e81c2c92e81c2c92e81c2c92e - .octa 0x81c2c92e81c2c92e81c2c92e81c2c92e - .octa 0x92722c8592722c8592722c8592722c85 - .octa 0x92722c8592722c8592722c8592722c85 - .octa 0xa2bfe8a1a2bfe8a1a2bfe8a1a2bfe8a1 - .octa 0xa2bfe8a1a2bfe8a1a2bfe8a1a2bfe8a1 - .octa 0xa81a664ba81a664ba81a664ba81a664b - .octa 0xa81a664ba81a664ba81a664ba81a664b - .octa 0xc24b8b70c24b8b70c24b8b70c24b8b70 - .octa 0xc24b8b70c24b8b70c24b8b70c24b8b70 - .octa 0xc76c51a3c76c51a3c76c51a3c76c51a3 - .octa 0xc76c51a3c76c51a3c76c51a3c76c51a3 - .octa 0xd192e819d192e819d192e819d192e819 - .octa 0xd192e819d192e819d192e819d192e819 - .octa 0xd6990624d6990624d6990624d6990624 - .octa 0xd6990624d6990624d6990624d6990624 - .octa 0xf40e3585f40e3585f40e3585f40e3585 - .octa 0xf40e3585f40e3585f40e3585f40e3585 - .octa 0x106aa070106aa070106aa070106aa070 - .octa 0x106aa070106aa070106aa070106aa070 - .octa 0x19a4c11619a4c11619a4c11619a4c116 - .octa 0x19a4c11619a4c11619a4c11619a4c116 - .octa 0x1e376c081e376c081e376c081e376c08 - .octa 0x1e376c081e376c081e376c081e376c08 - .octa 0x2748774c2748774c2748774c2748774c - .octa 0x2748774c2748774c2748774c2748774c - .octa 0x34b0bcb534b0bcb534b0bcb534b0bcb5 - .octa 0x34b0bcb534b0bcb534b0bcb534b0bcb5 - .octa 0x391c0cb3391c0cb3391c0cb3391c0cb3 - .octa 0x391c0cb3391c0cb3391c0cb3391c0cb3 - .octa 0x4ed8aa4a4ed8aa4a4ed8aa4a4ed8aa4a - .octa 0x4ed8aa4a4ed8aa4a4ed8aa4a4ed8aa4a - .octa 0x5b9cca4f5b9cca4f5b9cca4f5b9cca4f - .octa 0x5b9cca4f5b9cca4f5b9cca4f5b9cca4f - .octa 0x682e6ff3682e6ff3682e6ff3682e6ff3 - .octa 0x682e6ff3682e6ff3682e6ff3682e6ff3 - .octa 0x748f82ee748f82ee748f82ee748f82ee - .octa 0x748f82ee748f82ee748f82ee748f82ee - .octa 0x78a5636f78a5636f78a5636f78a5636f - .octa 0x78a5636f78a5636f78a5636f78a5636f - .octa 0x84c8781484c8781484c8781484c87814 - .octa 0x84c8781484c8781484c8781484c87814 - .octa 0x8cc702088cc702088cc702088cc70208 - .octa 0x8cc702088cc702088cc702088cc70208 - .octa 0x90befffa90befffa90befffa90befffa - .octa 0x90befffa90befffa90befffa90befffa - .octa 0xa4506ceba4506ceba4506ceba4506ceb - .octa 0xa4506ceba4506ceba4506ceba4506ceb - .octa 0xbef9a3f7bef9a3f7bef9a3f7bef9a3f7 - .octa 0xbef9a3f7bef9a3f7bef9a3f7bef9a3f7 - .octa 0xc67178f2c67178f2c67178f2c67178f2 - .octa 0xc67178f2c67178f2c67178f2c67178f2 - -.section .rodata.cst32.PSHUFFLE_BYTE_FLIP_MASK, "aM", @progbits, 32 -.align 32 -PSHUFFLE_BYTE_FLIP_MASK: -.octa 0x0c0d0e0f08090a0b0405060700010203 -.octa 0x0c0d0e0f08090a0b0405060700010203 - -.section .rodata.cst256.K256, "aM", @progbits, 256 -.align 64 -.global K256 -K256: - .int 0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5 - .int 0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5 - .int 0xd807aa98,0x12835b01,0x243185be,0x550c7dc3 - .int 0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174 - .int 0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc - .int 0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da - .int 0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7 - .int 0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967 - .int 0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13 - .int 0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85 - .int 0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3 - .int 0xd192e819,0xd6990624,0xf40e3585,0x106aa070 - .int 0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5 - .int 0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3 - .int 0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208 - .int 0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2 diff --git a/arch/x86/crypto/sha512-mb/Makefile b/arch/x86/crypto/sha512-mb/Makefile deleted file mode 100644 index 90f1ef6..00000000 --- a/arch/x86/crypto/sha512-mb/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0 -# -# Arch-specific CryptoAPI modules. -# - -avx2_supported := $(call as-instr,vpgatherdd %ymm0$(comma)(%eax$(comma)%ymm1\ - $(comma)4)$(comma)%ymm2,yes,no) -ifeq ($(avx2_supported),yes) - obj-$(CONFIG_CRYPTO_SHA512_MB) += sha512-mb.o - sha512-mb-y := sha512_mb.o sha512_mb_mgr_flush_avx2.o \ - sha512_mb_mgr_init_avx2.o sha512_mb_mgr_submit_avx2.o sha512_x4_avx2.o -endif diff --git a/arch/x86/crypto/sha512-mb/sha512_mb.c b/arch/x86/crypto/sha512-mb/sha512_mb.c deleted file mode 100644 index 26b8567..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb.c +++ /dev/null @@ -1,1047 +0,0 @@ -/* - * Multi buffer SHA512 algorithm Glue Code - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <crypto/internal/hash.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/mm.h> -#include <linux/cryptohash.h> -#include <linux/types.h> -#include <linux/list.h> -#include <crypto/scatterwalk.h> -#include <crypto/sha.h> -#include <crypto/mcryptd.h> -#include <crypto/crypto_wq.h> -#include <asm/byteorder.h> -#include <linux/hardirq.h> -#include <asm/fpu/api.h> -#include "sha512_mb_ctx.h" - -#define FLUSH_INTERVAL 1000 /* in usec */ - -static struct mcryptd_alg_state sha512_mb_alg_state; - -struct sha512_mb_ctx { - struct mcryptd_ahash *mcryptd_tfm; -}; - -static inline struct mcryptd_hash_request_ctx - *cast_hash_to_mcryptd_ctx(struct sha512_hash_ctx *hash_ctx) -{ - struct ahash_request *areq; - - areq = container_of((void *) hash_ctx, struct ahash_request, __ctx); - return container_of(areq, struct mcryptd_hash_request_ctx, areq); -} - -static inline struct ahash_request - *cast_mcryptd_ctx_to_req(struct mcryptd_hash_request_ctx *ctx) -{ - return container_of((void *) ctx, struct ahash_request, __ctx); -} - -static void req_ctx_init(struct mcryptd_hash_request_ctx *rctx, - struct ahash_request *areq) -{ - rctx->flag = HASH_UPDATE; -} - -static asmlinkage void (*sha512_job_mgr_init)(struct sha512_mb_mgr *state); -static asmlinkage struct job_sha512* (*sha512_job_mgr_submit) - (struct sha512_mb_mgr *state, - struct job_sha512 *job); -static asmlinkage struct job_sha512* (*sha512_job_mgr_flush) - (struct sha512_mb_mgr *state); -static asmlinkage struct job_sha512* (*sha512_job_mgr_get_comp_job) - (struct sha512_mb_mgr *state); - -inline uint32_t sha512_pad(uint8_t padblock[SHA512_BLOCK_SIZE * 2], - uint64_t total_len) -{ - uint32_t i = total_len & (SHA512_BLOCK_SIZE - 1); - - memset(&padblock[i], 0, SHA512_BLOCK_SIZE); - padblock[i] = 0x80; - - i += ((SHA512_BLOCK_SIZE - 1) & - (0 - (total_len + SHA512_PADLENGTHFIELD_SIZE + 1))) - + 1 + SHA512_PADLENGTHFIELD_SIZE; - -#if SHA512_PADLENGTHFIELD_SIZE == 16 - *((uint64_t *) &padblock[i - 16]) = 0; -#endif - - *((uint64_t *) &padblock[i - 8]) = cpu_to_be64(total_len << 3); - - /* Number of extra blocks to hash */ - return i >> SHA512_LOG2_BLOCK_SIZE; -} - -static struct sha512_hash_ctx *sha512_ctx_mgr_resubmit - (struct sha512_ctx_mgr *mgr, struct sha512_hash_ctx *ctx) -{ - while (ctx) { - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Clear PROCESSING bit */ - ctx->status = HASH_CTX_STS_COMPLETE; - return ctx; - } - - /* - * If the extra blocks are empty, begin hashing what remains - * in the user's buffer. - */ - if (ctx->partial_block_buffer_length == 0 && - ctx->incoming_buffer_length) { - - const void *buffer = ctx->incoming_buffer; - uint32_t len = ctx->incoming_buffer_length; - uint32_t copy_len; - - /* - * Only entire blocks can be hashed. - * Copy remainder to extra blocks buffer. - */ - copy_len = len & (SHA512_BLOCK_SIZE-1); - - if (copy_len) { - len -= copy_len; - memcpy(ctx->partial_block_buffer, - ((const char *) buffer + len), - copy_len); - ctx->partial_block_buffer_length = copy_len; - } - - ctx->incoming_buffer_length = 0; - - /* len should be a multiple of the block size now */ - assert((len % SHA512_BLOCK_SIZE) == 0); - - /* Set len to the number of blocks to be hashed */ - len >>= SHA512_LOG2_BLOCK_SIZE; - - if (len) { - - ctx->job.buffer = (uint8_t *) buffer; - ctx->job.len = len; - ctx = (struct sha512_hash_ctx *) - sha512_job_mgr_submit(&mgr->mgr, - &ctx->job); - continue; - } - } - - /* - * If the extra blocks are not empty, then we are - * either on the last block(s) or we need more - * user input before continuing. - */ - if (ctx->status & HASH_CTX_STS_LAST) { - - uint8_t *buf = ctx->partial_block_buffer; - uint32_t n_extra_blocks = - sha512_pad(buf, ctx->total_length); - - ctx->status = (HASH_CTX_STS_PROCESSING | - HASH_CTX_STS_COMPLETE); - ctx->job.buffer = buf; - ctx->job.len = (uint32_t) n_extra_blocks; - ctx = (struct sha512_hash_ctx *) - sha512_job_mgr_submit(&mgr->mgr, &ctx->job); - continue; - } - - if (ctx) - ctx->status = HASH_CTX_STS_IDLE; - return ctx; - } - - return NULL; -} - -static struct sha512_hash_ctx - *sha512_ctx_mgr_get_comp_ctx(struct mcryptd_alg_cstate *cstate) -{ - /* - * If get_comp_job returns NULL, there are no jobs complete. - * If get_comp_job returns a job, verify that it is safe to return to - * the user. - * If it is not ready, resubmit the job to finish processing. - * If sha512_ctx_mgr_resubmit returned a job, it is ready to be - * returned. - * Otherwise, all jobs currently being managed by the hash_ctx_mgr - * still need processing. - */ - struct sha512_ctx_mgr *mgr; - struct sha512_hash_ctx *ctx; - unsigned long flags; - - mgr = cstate->mgr; - spin_lock_irqsave(&cstate->work_lock, flags); - ctx = (struct sha512_hash_ctx *) - sha512_job_mgr_get_comp_job(&mgr->mgr); - ctx = sha512_ctx_mgr_resubmit(mgr, ctx); - spin_unlock_irqrestore(&cstate->work_lock, flags); - return ctx; -} - -static void sha512_ctx_mgr_init(struct sha512_ctx_mgr *mgr) -{ - sha512_job_mgr_init(&mgr->mgr); -} - -static struct sha512_hash_ctx - *sha512_ctx_mgr_submit(struct mcryptd_alg_cstate *cstate, - struct sha512_hash_ctx *ctx, - const void *buffer, - uint32_t len, - int flags) -{ - struct sha512_ctx_mgr *mgr; - unsigned long irqflags; - - mgr = cstate->mgr; - spin_lock_irqsave(&cstate->work_lock, irqflags); - if (flags & ~(HASH_UPDATE | HASH_LAST)) { - /* User should not pass anything other than UPDATE or LAST */ - ctx->error = HASH_CTX_ERROR_INVALID_FLAGS; - goto unlock; - } - - if (ctx->status & HASH_CTX_STS_PROCESSING) { - /* Cannot submit to a currently processing job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_PROCESSING; - goto unlock; - } - - if (ctx->status & HASH_CTX_STS_COMPLETE) { - /* Cannot update a finished job. */ - ctx->error = HASH_CTX_ERROR_ALREADY_COMPLETED; - goto unlock; - } - - /* - * If we made it here, there were no errors during this call to - * submit - */ - ctx->error = HASH_CTX_ERROR_NONE; - - /* Store buffer ptr info from user */ - ctx->incoming_buffer = buffer; - ctx->incoming_buffer_length = len; - - /* - * Store the user's request flags and mark this ctx as currently being - * processed. - */ - ctx->status = (flags & HASH_LAST) ? - (HASH_CTX_STS_PROCESSING | HASH_CTX_STS_LAST) : - HASH_CTX_STS_PROCESSING; - - /* Advance byte counter */ - ctx->total_length += len; - - /* - * If there is anything currently buffered in the extra blocks, - * append to it until it contains a whole block. - * Or if the user's buffer contains less than a whole block, - * append as much as possible to the extra block. - */ - if (ctx->partial_block_buffer_length || len < SHA512_BLOCK_SIZE) { - /* Compute how many bytes to copy from user buffer into extra - * block - */ - uint32_t copy_len = SHA512_BLOCK_SIZE - - ctx->partial_block_buffer_length; - if (len < copy_len) - copy_len = len; - - if (copy_len) { - /* Copy and update relevant pointers and counters */ - memcpy - (&ctx->partial_block_buffer[ctx->partial_block_buffer_length], - buffer, copy_len); - - ctx->partial_block_buffer_length += copy_len; - ctx->incoming_buffer = (const void *) - ((const char *)buffer + copy_len); - ctx->incoming_buffer_length = len - copy_len; - } - - /* The extra block should never contain more than 1 block - * here - */ - assert(ctx->partial_block_buffer_length <= SHA512_BLOCK_SIZE); - - /* If the extra block buffer contains exactly 1 block, it can - * be hashed. - */ - if (ctx->partial_block_buffer_length >= SHA512_BLOCK_SIZE) { - ctx->partial_block_buffer_length = 0; - - ctx->job.buffer = ctx->partial_block_buffer; - ctx->job.len = 1; - ctx = (struct sha512_hash_ctx *) - sha512_job_mgr_submit(&mgr->mgr, &ctx->job); - } - } - - ctx = sha512_ctx_mgr_resubmit(mgr, ctx); -unlock: - spin_unlock_irqrestore(&cstate->work_lock, irqflags); - return ctx; -} - -static struct sha512_hash_ctx *sha512_ctx_mgr_flush(struct mcryptd_alg_cstate *cstate) -{ - struct sha512_ctx_mgr *mgr; - struct sha512_hash_ctx *ctx; - unsigned long flags; - - mgr = cstate->mgr; - spin_lock_irqsave(&cstate->work_lock, flags); - while (1) { - ctx = (struct sha512_hash_ctx *) - sha512_job_mgr_flush(&mgr->mgr); - - /* If flush returned 0, there are no more jobs in flight. */ - if (!ctx) - break; - - /* - * If flush returned a job, resubmit the job to finish - * processing. - */ - ctx = sha512_ctx_mgr_resubmit(mgr, ctx); - - /* - * If sha512_ctx_mgr_resubmit returned a job, it is ready to - * be returned. Otherwise, all jobs currently being managed by - * the sha512_ctx_mgr still need processing. Loop. - */ - if (ctx) - break; - } - spin_unlock_irqrestore(&cstate->work_lock, flags); - return ctx; -} - -static int sha512_mb_init(struct ahash_request *areq) -{ - struct sha512_hash_ctx *sctx = ahash_request_ctx(areq); - - hash_ctx_init(sctx); - sctx->job.result_digest[0] = SHA512_H0; - sctx->job.result_digest[1] = SHA512_H1; - sctx->job.result_digest[2] = SHA512_H2; - sctx->job.result_digest[3] = SHA512_H3; - sctx->job.result_digest[4] = SHA512_H4; - sctx->job.result_digest[5] = SHA512_H5; - sctx->job.result_digest[6] = SHA512_H6; - sctx->job.result_digest[7] = SHA512_H7; - sctx->total_length = 0; - sctx->partial_block_buffer_length = 0; - sctx->status = HASH_CTX_STS_IDLE; - - return 0; -} - -static int sha512_mb_set_results(struct mcryptd_hash_request_ctx *rctx) -{ - int i; - struct sha512_hash_ctx *sctx = ahash_request_ctx(&rctx->areq); - __be64 *dst = (__be64 *) rctx->out; - - for (i = 0; i < 8; ++i) - dst[i] = cpu_to_be64(sctx->job.result_digest[i]); - - return 0; -} - -static int sha_finish_walk(struct mcryptd_hash_request_ctx **ret_rctx, - struct mcryptd_alg_cstate *cstate, bool flush) -{ - int flag = HASH_UPDATE; - int nbytes, err = 0; - struct mcryptd_hash_request_ctx *rctx = *ret_rctx; - struct sha512_hash_ctx *sha_ctx; - - /* more work ? */ - while (!(rctx->flag & HASH_DONE)) { - nbytes = crypto_ahash_walk_done(&rctx->walk, 0); - if (nbytes < 0) { - err = nbytes; - goto out; - } - /* check if the walk is done */ - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - if (rctx->flag & HASH_FINAL) - flag |= HASH_LAST; - - } - sha_ctx = (struct sha512_hash_ctx *) - ahash_request_ctx(&rctx->areq); - kernel_fpu_begin(); - sha_ctx = sha512_ctx_mgr_submit(cstate, sha_ctx, - rctx->walk.data, nbytes, flag); - if (!sha_ctx) { - if (flush) - sha_ctx = sha512_ctx_mgr_flush(cstate); - } - kernel_fpu_end(); - if (sha_ctx) - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - else { - rctx = NULL; - goto out; - } - } - - /* copy the results */ - if (rctx->flag & HASH_FINAL) - sha512_mb_set_results(rctx); - -out: - *ret_rctx = rctx; - return err; -} - -static int sha_complete_job(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate, - int err) -{ - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha512_hash_ctx *sha_ctx; - struct mcryptd_hash_request_ctx *req_ctx; - int ret; - unsigned long flags; - - /* remove from work list */ - spin_lock_irqsave(&cstate->work_lock, flags); - list_del(&rctx->waiter); - spin_unlock_irqrestore(&cstate->work_lock, flags); - - if (irqs_disabled()) - rctx->complete(&req->base, err); - else { - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); - } - - /* check to see if there are other jobs that are done */ - sha_ctx = sha512_ctx_mgr_get_comp_ctx(cstate); - while (sha_ctx) { - req_ctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&req_ctx, cstate, false); - if (req_ctx) { - spin_lock_irqsave(&cstate->work_lock, flags); - list_del(&req_ctx->waiter); - spin_unlock_irqrestore(&cstate->work_lock, flags); - - req = cast_mcryptd_ctx_to_req(req_ctx); - if (irqs_disabled()) - req_ctx->complete(&req->base, ret); - else { - local_bh_disable(); - req_ctx->complete(&req->base, ret); - local_bh_enable(); - } - } - sha_ctx = sha512_ctx_mgr_get_comp_ctx(cstate); - } - - return 0; -} - -static void sha512_mb_add_list(struct mcryptd_hash_request_ctx *rctx, - struct mcryptd_alg_cstate *cstate) -{ - unsigned long next_flush; - unsigned long delay = usecs_to_jiffies(FLUSH_INTERVAL); - unsigned long flags; - - /* initialize tag */ - rctx->tag.arrival = jiffies; /* tag the arrival time */ - rctx->tag.seq_num = cstate->next_seq_num++; - next_flush = rctx->tag.arrival + delay; - rctx->tag.expire = next_flush; - - spin_lock_irqsave(&cstate->work_lock, flags); - list_add_tail(&rctx->waiter, &cstate->work_list); - spin_unlock_irqrestore(&cstate->work_lock, flags); - - mcryptd_arm_flusher(cstate, delay); -} - -static int sha512_mb_update(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, - areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha512_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha512_hash_ctx *sha_ctx; - int ret = 0, nbytes; - - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) - rctx->flag |= HASH_DONE; - - /* submit */ - sha_ctx = (struct sha512_hash_ctx *) ahash_request_ctx(areq); - sha512_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha512_ctx_mgr_submit(cstate, sha_ctx, rctx->walk.data, - nbytes, HASH_UPDATE); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha512_mb_finup(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, - areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha512_mb_alg_state.alg_cstate); - - struct ahash_request *req = cast_mcryptd_ctx_to_req(rctx); - struct sha512_hash_ctx *sha_ctx; - int ret = 0, flag = HASH_UPDATE, nbytes; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - nbytes = crypto_ahash_walk_first(req, &rctx->walk); - - if (nbytes < 0) { - ret = nbytes; - goto done; - } - - if (crypto_ahash_walk_last(&rctx->walk)) { - rctx->flag |= HASH_DONE; - flag = HASH_LAST; - } - - /* submit */ - rctx->flag |= HASH_FINAL; - sha_ctx = (struct sha512_hash_ctx *) ahash_request_ctx(areq); - sha512_mb_add_list(rctx, cstate); - - kernel_fpu_begin(); - sha_ctx = sha512_ctx_mgr_submit(cstate, sha_ctx, rctx->walk.data, - nbytes, flag); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha512_mb_final(struct ahash_request *areq) -{ - struct mcryptd_hash_request_ctx *rctx = - container_of(areq, struct mcryptd_hash_request_ctx, - areq); - struct mcryptd_alg_cstate *cstate = - this_cpu_ptr(sha512_mb_alg_state.alg_cstate); - - struct sha512_hash_ctx *sha_ctx; - int ret = 0; - u8 data; - - /* sanity check */ - if (rctx->tag.cpu != smp_processor_id()) { - pr_err("mcryptd error: cpu clash\n"); - goto done; - } - - /* need to init context */ - req_ctx_init(rctx, areq); - - rctx->flag |= HASH_DONE | HASH_FINAL; - - sha_ctx = (struct sha512_hash_ctx *) ahash_request_ctx(areq); - /* flag HASH_FINAL and 0 data size */ - sha512_mb_add_list(rctx, cstate); - kernel_fpu_begin(); - sha_ctx = sha512_ctx_mgr_submit(cstate, sha_ctx, &data, 0, HASH_LAST); - kernel_fpu_end(); - - /* check if anything is returned */ - if (!sha_ctx) - return -EINPROGRESS; - - if (sha_ctx->error) { - ret = sha_ctx->error; - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - goto done; - } - - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - ret = sha_finish_walk(&rctx, cstate, false); - if (!rctx) - return -EINPROGRESS; -done: - sha_complete_job(rctx, cstate, ret); - return ret; -} - -static int sha512_mb_export(struct ahash_request *areq, void *out) -{ - struct sha512_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(out, sctx, sizeof(*sctx)); - - return 0; -} - -static int sha512_mb_import(struct ahash_request *areq, const void *in) -{ - struct sha512_hash_ctx *sctx = ahash_request_ctx(areq); - - memcpy(sctx, in, sizeof(*sctx)); - - return 0; -} - -static int sha512_mb_async_init_tfm(struct crypto_tfm *tfm) -{ - struct mcryptd_ahash *mcryptd_tfm; - struct sha512_mb_ctx *ctx = crypto_tfm_ctx(tfm); - struct mcryptd_hash_ctx *mctx; - - mcryptd_tfm = mcryptd_alloc_ahash("__intel_sha512-mb", - CRYPTO_ALG_INTERNAL, - CRYPTO_ALG_INTERNAL); - if (IS_ERR(mcryptd_tfm)) - return PTR_ERR(mcryptd_tfm); - mctx = crypto_ahash_ctx(&mcryptd_tfm->base); - mctx->alg_state = &sha512_mb_alg_state; - ctx->mcryptd_tfm = mcryptd_tfm; - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - crypto_ahash_reqsize(&mcryptd_tfm->base)); - - return 0; -} - -static void sha512_mb_async_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha512_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static int sha512_mb_areq_init_tfm(struct crypto_tfm *tfm) -{ - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct ahash_request) + - sizeof(struct sha512_hash_ctx)); - - return 0; -} - -static void sha512_mb_areq_exit_tfm(struct crypto_tfm *tfm) -{ - struct sha512_mb_ctx *ctx = crypto_tfm_ctx(tfm); - - mcryptd_free_ahash(ctx->mcryptd_tfm); -} - -static struct ahash_alg sha512_mb_areq_alg = { - .init = sha512_mb_init, - .update = sha512_mb_update, - .final = sha512_mb_final, - .finup = sha512_mb_finup, - .export = sha512_mb_export, - .import = sha512_mb_import, - .halg = { - .digestsize = SHA512_DIGEST_SIZE, - .statesize = sizeof(struct sha512_hash_ctx), - .base = { - .cra_name = "__sha512-mb", - .cra_driver_name = "__intel_sha512-mb", - .cra_priority = 100, - /* - * use ASYNC flag as some buffers in multi-buffer - * algo may not have completed before hashing thread - * sleep - */ - .cra_flags = CRYPTO_ALG_ASYNC | - CRYPTO_ALG_INTERNAL, - .cra_blocksize = SHA512_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT - (sha512_mb_areq_alg.halg.base.cra_list), - .cra_init = sha512_mb_areq_init_tfm, - .cra_exit = sha512_mb_areq_exit_tfm, - .cra_ctxsize = sizeof(struct sha512_hash_ctx), - } - } -}; - -static int sha512_mb_async_init(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_init(mcryptd_req); -} - -static int sha512_mb_async_update(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_update(mcryptd_req); -} - -static int sha512_mb_async_finup(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_finup(mcryptd_req); -} - -static int sha512_mb_async_final(struct ahash_request *req) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_final(mcryptd_req); -} - -static int sha512_mb_async_digest(struct ahash_request *req) -{ - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_digest(mcryptd_req); -} - -static int sha512_mb_async_export(struct ahash_request *req, void *out) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - return crypto_ahash_export(mcryptd_req, out); -} - -static int sha512_mb_async_import(struct ahash_request *req, const void *in) -{ - struct ahash_request *mcryptd_req = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct sha512_mb_ctx *ctx = crypto_ahash_ctx(tfm); - struct mcryptd_ahash *mcryptd_tfm = ctx->mcryptd_tfm; - struct crypto_ahash *child = mcryptd_ahash_child(mcryptd_tfm); - struct mcryptd_hash_request_ctx *rctx; - struct ahash_request *areq; - - memcpy(mcryptd_req, req, sizeof(*req)); - ahash_request_set_tfm(mcryptd_req, &mcryptd_tfm->base); - rctx = ahash_request_ctx(mcryptd_req); - - areq = &rctx->areq; - - ahash_request_set_tfm(areq, child); - ahash_request_set_callback(areq, CRYPTO_TFM_REQ_MAY_SLEEP, - rctx->complete, req); - - return crypto_ahash_import(mcryptd_req, in); -} - -static struct ahash_alg sha512_mb_async_alg = { - .init = sha512_mb_async_init, - .update = sha512_mb_async_update, - .final = sha512_mb_async_final, - .finup = sha512_mb_async_finup, - .digest = sha512_mb_async_digest, - .export = sha512_mb_async_export, - .import = sha512_mb_async_import, - .halg = { - .digestsize = SHA512_DIGEST_SIZE, - .statesize = sizeof(struct sha512_hash_ctx), - .base = { - .cra_name = "sha512", - .cra_driver_name = "sha512_mb", - /* - * Low priority, since with few concurrent hash requests - * this is extremely slow due to the flush delay. Users - * whose workloads would benefit from this can request - * it explicitly by driver name, or can increase its - * priority at runtime using NETLINK_CRYPTO. - */ - .cra_priority = 50, - .cra_flags = CRYPTO_ALG_ASYNC, - .cra_blocksize = SHA512_BLOCK_SIZE, - .cra_module = THIS_MODULE, - .cra_list = LIST_HEAD_INIT - (sha512_mb_async_alg.halg.base.cra_list), - .cra_init = sha512_mb_async_init_tfm, - .cra_exit = sha512_mb_async_exit_tfm, - .cra_ctxsize = sizeof(struct sha512_mb_ctx), - .cra_alignmask = 0, - }, - }, -}; - -static unsigned long sha512_mb_flusher(struct mcryptd_alg_cstate *cstate) -{ - struct mcryptd_hash_request_ctx *rctx; - unsigned long cur_time; - unsigned long next_flush = 0; - struct sha512_hash_ctx *sha_ctx; - - - cur_time = jiffies; - - while (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - if time_before(cur_time, rctx->tag.expire) - break; - kernel_fpu_begin(); - sha_ctx = (struct sha512_hash_ctx *) - sha512_ctx_mgr_flush(cstate); - kernel_fpu_end(); - if (!sha_ctx) { - pr_err("sha512_mb error: nothing got flushed for" - " non-empty list\n"); - break; - } - rctx = cast_hash_to_mcryptd_ctx(sha_ctx); - sha_finish_walk(&rctx, cstate, true); - sha_complete_job(rctx, cstate, 0); - } - - if (!list_empty(&cstate->work_list)) { - rctx = list_entry(cstate->work_list.next, - struct mcryptd_hash_request_ctx, waiter); - /* get the hash context and then flush time */ - next_flush = rctx->tag.expire; - mcryptd_arm_flusher(cstate, get_delay(next_flush)); - } - return next_flush; -} - -static int __init sha512_mb_mod_init(void) -{ - - int cpu; - int err; - struct mcryptd_alg_cstate *cpu_state; - - /* check for dependent cpu features */ - if (!boot_cpu_has(X86_FEATURE_AVX2) || - !boot_cpu_has(X86_FEATURE_BMI2)) - return -ENODEV; - - /* initialize multibuffer structures */ - sha512_mb_alg_state.alg_cstate = - alloc_percpu(struct mcryptd_alg_cstate); - - sha512_job_mgr_init = sha512_mb_mgr_init_avx2; - sha512_job_mgr_submit = sha512_mb_mgr_submit_avx2; - sha512_job_mgr_flush = sha512_mb_mgr_flush_avx2; - sha512_job_mgr_get_comp_job = sha512_mb_mgr_get_comp_job_avx2; - - if (!sha512_mb_alg_state.alg_cstate) - return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha512_mb_alg_state.alg_cstate, cpu); - cpu_state->next_flush = 0; - cpu_state->next_seq_num = 0; - cpu_state->flusher_engaged = false; - INIT_DELAYED_WORK(&cpu_state->flush, mcryptd_flusher); - cpu_state->cpu = cpu; - cpu_state->alg_state = &sha512_mb_alg_state; - cpu_state->mgr = kzalloc(sizeof(struct sha512_ctx_mgr), - GFP_KERNEL); - if (!cpu_state->mgr) - goto err2; - sha512_ctx_mgr_init(cpu_state->mgr); - INIT_LIST_HEAD(&cpu_state->work_list); - spin_lock_init(&cpu_state->work_lock); - } - sha512_mb_alg_state.flusher = &sha512_mb_flusher; - - err = crypto_register_ahash(&sha512_mb_areq_alg); - if (err) - goto err2; - err = crypto_register_ahash(&sha512_mb_async_alg); - if (err) - goto err1; - - - return 0; -err1: - crypto_unregister_ahash(&sha512_mb_areq_alg); -err2: - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha512_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha512_mb_alg_state.alg_cstate); - return -ENODEV; -} - -static void __exit sha512_mb_mod_fini(void) -{ - int cpu; - struct mcryptd_alg_cstate *cpu_state; - - crypto_unregister_ahash(&sha512_mb_async_alg); - crypto_unregister_ahash(&sha512_mb_areq_alg); - for_each_possible_cpu(cpu) { - cpu_state = per_cpu_ptr(sha512_mb_alg_state.alg_cstate, cpu); - kfree(cpu_state->mgr); - } - free_percpu(sha512_mb_alg_state.alg_cstate); -} - -module_init(sha512_mb_mod_init); -module_exit(sha512_mb_mod_fini); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, multi buffer accelerated"); - -MODULE_ALIAS("sha512"); diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_ctx.h b/arch/x86/crypto/sha512-mb/sha512_mb_ctx.h deleted file mode 100644 index e5c465b..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_ctx.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Header file for multi buffer SHA512 context - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SHA_MB_CTX_INTERNAL_H -#define _SHA_MB_CTX_INTERNAL_H - -#include "sha512_mb_mgr.h" - -#define HASH_UPDATE 0x00 -#define HASH_LAST 0x01 -#define HASH_DONE 0x02 -#define HASH_FINAL 0x04 - -#define HASH_CTX_STS_IDLE 0x00 -#define HASH_CTX_STS_PROCESSING 0x01 -#define HASH_CTX_STS_LAST 0x02 -#define HASH_CTX_STS_COMPLETE 0x04 - -enum hash_ctx_error { - HASH_CTX_ERROR_NONE = 0, - HASH_CTX_ERROR_INVALID_FLAGS = -1, - HASH_CTX_ERROR_ALREADY_PROCESSING = -2, - HASH_CTX_ERROR_ALREADY_COMPLETED = -3, -}; - -#define hash_ctx_user_data(ctx) ((ctx)->user_data) -#define hash_ctx_digest(ctx) ((ctx)->job.result_digest) -#define hash_ctx_processing(ctx) ((ctx)->status & HASH_CTX_STS_PROCESSING) -#define hash_ctx_complete(ctx) ((ctx)->status == HASH_CTX_STS_COMPLETE) -#define hash_ctx_status(ctx) ((ctx)->status) -#define hash_ctx_error(ctx) ((ctx)->error) -#define hash_ctx_init(ctx) \ - do { \ - (ctx)->error = HASH_CTX_ERROR_NONE; \ - (ctx)->status = HASH_CTX_STS_COMPLETE; \ - } while (0) - -/* Hash Constants and Typedefs */ -#define SHA512_DIGEST_LENGTH 8 -#define SHA512_LOG2_BLOCK_SIZE 7 - -#define SHA512_PADLENGTHFIELD_SIZE 16 - -#ifdef SHA_MB_DEBUG -#define assert(expr) \ -do { \ - if (unlikely(!(expr))) { \ - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } \ -} while (0) -#else -#define assert(expr) do {} while (0) -#endif - -struct sha512_ctx_mgr { - struct sha512_mb_mgr mgr; -}; - -/* typedef struct sha512_ctx_mgr sha512_ctx_mgr; */ - -struct sha512_hash_ctx { - /* Must be at struct offset 0 */ - struct job_sha512 job; - /* status flag */ - int status; - /* error flag */ - int error; - - uint64_t total_length; - const void *incoming_buffer; - uint32_t incoming_buffer_length; - uint8_t partial_block_buffer[SHA512_BLOCK_SIZE * 2]; - uint32_t partial_block_buffer_length; - void *user_data; -}; - -#endif diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_mgr.h b/arch/x86/crypto/sha512-mb/sha512_mb_mgr.h deleted file mode 100644 index 178f17e..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * Header file for multi buffer SHA512 algorithm manager - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef __SHA_MB_MGR_H -#define __SHA_MB_MGR_H - -#include <linux/types.h> - -#define NUM_SHA512_DIGEST_WORDS 8 - -enum job_sts {STS_UNKNOWN = 0, - STS_BEING_PROCESSED = 1, - STS_COMPLETED = 2, - STS_INTERNAL_ERROR = 3, - STS_ERROR = 4 -}; - -struct job_sha512 { - u8 *buffer; - u64 len; - u64 result_digest[NUM_SHA512_DIGEST_WORDS] __aligned(32); - enum job_sts status; - void *user_data; -}; - -struct sha512_args_x4 { - uint64_t digest[8][4]; - uint8_t *data_ptr[4]; -}; - -struct sha512_lane_data { - struct job_sha512 *job_in_lane; -}; - -struct sha512_mb_mgr { - struct sha512_args_x4 args; - - uint64_t lens[4]; - - /* each byte is index (0...7) of unused lanes */ - uint64_t unused_lanes; - /* byte 4 is set to FF as a flag */ - struct sha512_lane_data ldata[4]; -}; - -#define SHA512_MB_MGR_NUM_LANES_AVX2 4 - -void sha512_mb_mgr_init_avx2(struct sha512_mb_mgr *state); -struct job_sha512 *sha512_mb_mgr_submit_avx2(struct sha512_mb_mgr *state, - struct job_sha512 *job); -struct job_sha512 *sha512_mb_mgr_flush_avx2(struct sha512_mb_mgr *state); -struct job_sha512 *sha512_mb_mgr_get_comp_job_avx2(struct sha512_mb_mgr *state); - -#endif diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_datastruct.S b/arch/x86/crypto/sha512-mb/sha512_mb_mgr_datastruct.S deleted file mode 100644 index cf2636d..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_datastruct.S +++ /dev/null @@ -1,281 +0,0 @@ -/* - * Header file for multi buffer SHA256 algorithm data structure - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -# Macros for defining data structures - -# Usage example - -#START_FIELDS # JOB_AES -### name size align -#FIELD _plaintext, 8, 8 # pointer to plaintext -#FIELD _ciphertext, 8, 8 # pointer to ciphertext -#FIELD _IV, 16, 8 # IV -#FIELD _keys, 8, 8 # pointer to keys -#FIELD _len, 4, 4 # length in bytes -#FIELD _status, 4, 4 # status enumeration -#FIELD _user_data, 8, 8 # pointer to user data -#UNION _union, size1, align1, \ -# size2, align2, \ -# size3, align3, \ -# ... -#END_FIELDS -#%assign _JOB_AES_size _FIELD_OFFSET -#%assign _JOB_AES_align _STRUCT_ALIGN - -######################################################################### - -# Alternate "struc-like" syntax: -# STRUCT job_aes2 -# RES_Q .plaintext, 1 -# RES_Q .ciphertext, 1 -# RES_DQ .IV, 1 -# RES_B .nested, _JOB_AES_SIZE, _JOB_AES_ALIGN -# RES_U .union, size1, align1, \ -# size2, align2, \ -# ... -# ENDSTRUCT -# # Following only needed if nesting -# %assign job_aes2_size _FIELD_OFFSET -# %assign job_aes2_align _STRUCT_ALIGN -# -# RES_* macros take a name, a count and an optional alignment. -# The count in in terms of the base size of the macro, and the -# default alignment is the base size. -# The macros are: -# Macro Base size -# RES_B 1 -# RES_W 2 -# RES_D 4 -# RES_Q 8 -# RES_DQ 16 -# RES_Y 32 -# RES_Z 64 -# -# RES_U defines a union. It's arguments are a name and two or more -# pairs of "size, alignment" -# -# The two assigns are only needed if this structure is being nested -# within another. Even if the assigns are not done, one can still use -# STRUCT_NAME_size as the size of the structure. -# -# Note that for nesting, you still need to assign to STRUCT_NAME_size. -# -# The differences between this and using "struc" directly are that each -# type is implicitly aligned to its natural length (although this can be -# over-ridden with an explicit third parameter), and that the structure -# is padded at the end to its overall alignment. -# - -######################################################################### - -#ifndef _DATASTRUCT_ASM_ -#define _DATASTRUCT_ASM_ - -#define PTR_SZ 8 -#define SHA512_DIGEST_WORD_SIZE 8 -#define SHA512_MB_MGR_NUM_LANES_AVX2 4 -#define NUM_SHA512_DIGEST_WORDS 8 -#define SZ4 4*SHA512_DIGEST_WORD_SIZE -#define ROUNDS 80*SZ4 -#define SHA512_DIGEST_ROW_SIZE (SHA512_MB_MGR_NUM_LANES_AVX2 * 8) - -# START_FIELDS -.macro START_FIELDS - _FIELD_OFFSET = 0 - _STRUCT_ALIGN = 0 -.endm - -# FIELD name size align -.macro FIELD name size align - _FIELD_OFFSET = (_FIELD_OFFSET + (\align) - 1) & (~ ((\align)-1)) - \name = _FIELD_OFFSET - _FIELD_OFFSET = _FIELD_OFFSET + (\size) -.if (\align > _STRUCT_ALIGN) - _STRUCT_ALIGN = \align -.endif -.endm - -# END_FIELDS -.macro END_FIELDS - _FIELD_OFFSET = (_FIELD_OFFSET + _STRUCT_ALIGN-1) & (~ (_STRUCT_ALIGN-1)) -.endm - -.macro STRUCT p1 -START_FIELDS -.struc \p1 -.endm - -.macro ENDSTRUCT - tmp = _FIELD_OFFSET - END_FIELDS - tmp = (_FIELD_OFFSET - ##tmp) -.if (tmp > 0) - .lcomm tmp -.endm - -## RES_int name size align -.macro RES_int p1 p2 p3 - name = \p1 - size = \p2 - align = .\p3 - - _FIELD_OFFSET = (_FIELD_OFFSET + (align) - 1) & (~ ((align)-1)) -.align align -.lcomm name size - _FIELD_OFFSET = _FIELD_OFFSET + (size) -.if (align > _STRUCT_ALIGN) - _STRUCT_ALIGN = align -.endif -.endm - -# macro RES_B name, size [, align] -.macro RES_B _name, _size, _align=1 -RES_int _name _size _align -.endm - -# macro RES_W name, size [, align] -.macro RES_W _name, _size, _align=2 -RES_int _name 2*(_size) _align -.endm - -# macro RES_D name, size [, align] -.macro RES_D _name, _size, _align=4 -RES_int _name 4*(_size) _align -.endm - -# macro RES_Q name, size [, align] -.macro RES_Q _name, _size, _align=8 -RES_int _name 8*(_size) _align -.endm - -# macro RES_DQ name, size [, align] -.macro RES_DQ _name, _size, _align=16 -RES_int _name 16*(_size) _align -.endm - -# macro RES_Y name, size [, align] -.macro RES_Y _name, _size, _align=32 -RES_int _name 32*(_size) _align -.endm - -# macro RES_Z name, size [, align] -.macro RES_Z _name, _size, _align=64 -RES_int _name 64*(_size) _align -.endm - -#endif - -################################################################### -### Define SHA512 Out Of Order Data Structures -################################################################### - -START_FIELDS # LANE_DATA -### name size align -FIELD _job_in_lane, 8, 8 # pointer to job object -END_FIELDS - - _LANE_DATA_size = _FIELD_OFFSET - _LANE_DATA_align = _STRUCT_ALIGN - -#################################################################### - -START_FIELDS # SHA512_ARGS_X4 -### name size align -FIELD _digest, 8*8*4, 4 # transposed digest -FIELD _data_ptr, 8*4, 8 # array of pointers to data -END_FIELDS - - _SHA512_ARGS_X4_size = _FIELD_OFFSET - _SHA512_ARGS_X4_align = _STRUCT_ALIGN - -##################################################################### - -START_FIELDS # MB_MGR -### name size align -FIELD _args, _SHA512_ARGS_X4_size, _SHA512_ARGS_X4_align -FIELD _lens, 8*4, 8 -FIELD _unused_lanes, 8, 8 -FIELD _ldata, _LANE_DATA_size*4, _LANE_DATA_align -END_FIELDS - - _MB_MGR_size = _FIELD_OFFSET - _MB_MGR_align = _STRUCT_ALIGN - -_args_digest = _args + _digest -_args_data_ptr = _args + _data_ptr - -####################################################################### - -####################################################################### -#### Define constants -####################################################################### - -#define STS_UNKNOWN 0 -#define STS_BEING_PROCESSED 1 -#define STS_COMPLETED 2 - -####################################################################### -#### Define JOB_SHA512 structure -####################################################################### - -START_FIELDS # JOB_SHA512 -### name size align -FIELD _buffer, 8, 8 # pointer to buffer -FIELD _len, 8, 8 # length in bytes -FIELD _result_digest, 8*8, 32 # Digest (output) -FIELD _status, 4, 4 -FIELD _user_data, 8, 8 -END_FIELDS - - _JOB_SHA512_size = _FIELD_OFFSET - _JOB_SHA512_align = _STRUCT_ALIGN diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_flush_avx2.S b/arch/x86/crypto/sha512-mb/sha512_mb_mgr_flush_avx2.S deleted file mode 100644 index 7c629ca..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_flush_avx2.S +++ /dev/null @@ -1,297 +0,0 @@ -/* - * Flush routine for SHA512 multibuffer - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha512_mb_mgr_datastruct.S" - -.extern sha512_x4_avx2 - -# LINUX register definitions -#define arg1 %rdi -#define arg2 %rsi - -# idx needs to be other than arg1, arg2, rbx, r12 -#define idx %rdx - -# Common definitions -#define state arg1 -#define job arg2 -#define len2 arg2 - -#define unused_lanes %rbx -#define lane_data %rbx -#define tmp2 %rbx - -#define job_rax %rax -#define tmp1 %rax -#define size_offset %rax -#define tmp %rax -#define start_offset %rax - -#define tmp3 arg1 - -#define extra_blocks arg2 -#define p arg2 - -#define tmp4 %r8 -#define lens0 %r8 - -#define lens1 %r9 -#define lens2 %r10 -#define lens3 %r11 - -.macro LABEL prefix n -\prefix\n\(): -.endm - -.macro JNE_SKIP i -jne skip_\i -.endm - -.altmacro -.macro SET_OFFSET _offset -offset = \_offset -.endm -.noaltmacro - -# JOB* sha512_mb_mgr_flush_avx2(MB_MGR *state) -# arg 1 : rcx : state -ENTRY(sha512_mb_mgr_flush_avx2) - FRAME_BEGIN - push %rbx - - # If bit (32+3) is set, then all lanes are empty - mov _unused_lanes(state), unused_lanes - bt $32+7, unused_lanes - jc return_null - - # find a lane with a non-null job - xor idx, idx - offset = (_ldata + 1*_LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne one(%rip), idx - offset = (_ldata + 2*_LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne two(%rip), idx - offset = (_ldata + 3*_LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) - cmovne three(%rip), idx - - # copy idx to empty lanes -copy_lane_data: - offset = (_args + _data_ptr) - mov offset(state,idx,8), tmp - - I = 0 -.rep 4 - offset = (_ldata + I * _LANE_DATA_size + _job_in_lane) - cmpq $0, offset(state) -.altmacro - JNE_SKIP %I - offset = (_args + _data_ptr + 8*I) - mov tmp, offset(state) - offset = (_lens + 8*I +4) - movl $0xFFFFFFFF, offset(state) -LABEL skip_ %I - I = (I+1) -.noaltmacro -.endr - - # Find min length - mov _lens + 0*8(state),lens0 - mov lens0,idx - mov _lens + 1*8(state),lens1 - cmp idx,lens1 - cmovb lens1,idx - mov _lens + 2*8(state),lens2 - cmp idx,lens2 - cmovb lens2,idx - mov _lens + 3*8(state),lens3 - cmp idx,lens3 - cmovb lens3,idx - mov idx,len2 - and $0xF,idx - and $~0xFF,len2 - jz len_is_0 - - sub len2, lens0 - sub len2, lens1 - sub len2, lens2 - sub len2, lens3 - shr $32,len2 - mov lens0, _lens + 0*8(state) - mov lens1, _lens + 1*8(state) - mov lens2, _lens + 2*8(state) - mov lens3, _lens + 3*8(state) - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha512_x4_avx2 - # state and idx are intact - -len_is_0: - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $8, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens+4(state, idx, 8) - - vmovq _args_digest+0*32(state, idx, 8), %xmm0 - vpinsrq $1, _args_digest+1*32(state, idx, 8), %xmm0, %xmm0 - vmovq _args_digest+2*32(state, idx, 8), %xmm1 - vpinsrq $1, _args_digest+3*32(state, idx, 8), %xmm1, %xmm1 - vmovq _args_digest+4*32(state, idx, 8), %xmm2 - vpinsrq $1, _args_digest+5*32(state, idx, 8), %xmm2, %xmm2 - vmovq _args_digest+6*32(state, idx, 8), %xmm3 - vpinsrq $1, _args_digest+7*32(state, idx, 8), %xmm3, %xmm3 - - vmovdqu %xmm0, _result_digest(job_rax) - vmovdqu %xmm1, _result_digest+1*16(job_rax) - vmovdqu %xmm2, _result_digest+2*16(job_rax) - vmovdqu %xmm3, _result_digest+3*16(job_rax) - -return: - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return -ENDPROC(sha512_mb_mgr_flush_avx2) -.align 16 - -ENTRY(sha512_mb_mgr_get_comp_job_avx2) - push %rbx - - mov _unused_lanes(state), unused_lanes - bt $(32+7), unused_lanes - jc .return_null - - # Find min length - mov _lens(state),lens0 - mov lens0,idx - mov _lens+1*8(state),lens1 - cmp idx,lens1 - cmovb lens1,idx - mov _lens+2*8(state),lens2 - cmp idx,lens2 - cmovb lens2,idx - mov _lens+3*8(state),lens3 - cmp idx,lens3 - cmovb lens3,idx - test $~0xF,idx - jnz .return_null - and $0xF,idx - - #process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - mov _unused_lanes(state), unused_lanes - shl $8, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF, _lens+4(state, idx, 8) - - vmovq _args_digest(state, idx, 8), %xmm0 - vpinsrq $1, _args_digest+1*32(state, idx, 8), %xmm0, %xmm0 - vmovq _args_digest+2*32(state, idx, 8), %xmm1 - vpinsrq $1, _args_digest+3*32(state, idx, 8), %xmm1, %xmm1 - vmovq _args_digest+4*32(state, idx, 8), %xmm2 - vpinsrq $1, _args_digest+5*32(state, idx, 8), %xmm2, %xmm2 - vmovq _args_digest+6*32(state, idx, 8), %xmm3 - vpinsrq $1, _args_digest+7*32(state, idx, 8), %xmm3, %xmm3 - - vmovdqu %xmm0, _result_digest+0*16(job_rax) - vmovdqu %xmm1, _result_digest+1*16(job_rax) - vmovdqu %xmm2, _result_digest+2*16(job_rax) - vmovdqu %xmm3, _result_digest+3*16(job_rax) - - pop %rbx - - ret - -.return_null: - xor job_rax, job_rax - pop %rbx - ret -ENDPROC(sha512_mb_mgr_get_comp_job_avx2) - -.section .rodata.cst8.one, "aM", @progbits, 8 -.align 8 -one: -.quad 1 - -.section .rodata.cst8.two, "aM", @progbits, 8 -.align 8 -two: -.quad 2 - -.section .rodata.cst8.three, "aM", @progbits, 8 -.align 8 -three: -.quad 3 diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c b/arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c deleted file mode 100644 index d088050..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_init_avx2.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Initialization code for multi buffer SHA256 algorithm for AVX2 - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "sha512_mb_mgr.h" - -void sha512_mb_mgr_init_avx2(struct sha512_mb_mgr *state) -{ - unsigned int j; - - /* initially all lanes are unused */ - state->lens[0] = 0xFFFFFFFF00000000; - state->lens[1] = 0xFFFFFFFF00000001; - state->lens[2] = 0xFFFFFFFF00000002; - state->lens[3] = 0xFFFFFFFF00000003; - - state->unused_lanes = 0xFF03020100; - for (j = 0; j < 4; j++) - state->ldata[j].job_in_lane = NULL; -} diff --git a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_submit_avx2.S b/arch/x86/crypto/sha512-mb/sha512_mb_mgr_submit_avx2.S deleted file mode 100644 index 4ba709b..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_mb_mgr_submit_avx2.S +++ /dev/null @@ -1,224 +0,0 @@ -/* - * Buffer submit code for multi buffer SHA512 algorithm - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include <linux/linkage.h> -#include <asm/frame.h> -#include "sha512_mb_mgr_datastruct.S" - -.extern sha512_x4_avx2 - -#define arg1 %rdi -#define arg2 %rsi - -#define idx %rdx -#define last_len %rdx - -#define size_offset %rcx -#define tmp2 %rcx - -# Common definitions -#define state arg1 -#define job arg2 -#define len2 arg2 -#define p2 arg2 - -#define p %r11 -#define start_offset %r11 - -#define unused_lanes %rbx - -#define job_rax %rax -#define len %rax - -#define lane %r12 -#define tmp3 %r12 -#define lens3 %r12 - -#define extra_blocks %r8 -#define lens0 %r8 - -#define tmp %r9 -#define lens1 %r9 - -#define lane_data %r10 -#define lens2 %r10 - -#define DWORD_len %eax - -# JOB* sha512_mb_mgr_submit_avx2(MB_MGR *state, JOB *job) -# arg 1 : rcx : state -# arg 2 : rdx : job -ENTRY(sha512_mb_mgr_submit_avx2) - FRAME_BEGIN - push %rbx - push %r12 - - mov _unused_lanes(state), unused_lanes - movzb %bl,lane - shr $8, unused_lanes - imul $_LANE_DATA_size, lane,lane_data - movl $STS_BEING_PROCESSED, _status(job) - lea _ldata(state, lane_data), lane_data - mov unused_lanes, _unused_lanes(state) - movl _len(job), DWORD_len - - mov job, _job_in_lane(lane_data) - movl DWORD_len,_lens+4(state , lane, 8) - - # Load digest words from result_digest - vmovdqu _result_digest+0*16(job), %xmm0 - vmovdqu _result_digest+1*16(job), %xmm1 - vmovdqu _result_digest+2*16(job), %xmm2 - vmovdqu _result_digest+3*16(job), %xmm3 - - vmovq %xmm0, _args_digest(state, lane, 8) - vpextrq $1, %xmm0, _args_digest+1*32(state , lane, 8) - vmovq %xmm1, _args_digest+2*32(state , lane, 8) - vpextrq $1, %xmm1, _args_digest+3*32(state , lane, 8) - vmovq %xmm2, _args_digest+4*32(state , lane, 8) - vpextrq $1, %xmm2, _args_digest+5*32(state , lane, 8) - vmovq %xmm3, _args_digest+6*32(state , lane, 8) - vpextrq $1, %xmm3, _args_digest+7*32(state , lane, 8) - - mov _buffer(job), p - mov p, _args_data_ptr(state, lane, 8) - - cmp $0xFF, unused_lanes - jne return_null - -start_loop: - - # Find min length - mov _lens+0*8(state),lens0 - mov lens0,idx - mov _lens+1*8(state),lens1 - cmp idx,lens1 - cmovb lens1, idx - mov _lens+2*8(state),lens2 - cmp idx,lens2 - cmovb lens2,idx - mov _lens+3*8(state),lens3 - cmp idx,lens3 - cmovb lens3,idx - mov idx,len2 - and $0xF,idx - and $~0xFF,len2 - jz len_is_0 - - sub len2,lens0 - sub len2,lens1 - sub len2,lens2 - sub len2,lens3 - shr $32,len2 - mov lens0, _lens + 0*8(state) - mov lens1, _lens + 1*8(state) - mov lens2, _lens + 2*8(state) - mov lens3, _lens + 3*8(state) - - # "state" and "args" are the same address, arg1 - # len is arg2 - call sha512_x4_avx2 - # state and idx are intact - -len_is_0: - - # process completed job "idx" - imul $_LANE_DATA_size, idx, lane_data - lea _ldata(state, lane_data), lane_data - - mov _job_in_lane(lane_data), job_rax - mov _unused_lanes(state), unused_lanes - movq $0, _job_in_lane(lane_data) - movl $STS_COMPLETED, _status(job_rax) - shl $8, unused_lanes - or idx, unused_lanes - mov unused_lanes, _unused_lanes(state) - - movl $0xFFFFFFFF,_lens+4(state,idx,8) - vmovq _args_digest+0*32(state , idx, 8), %xmm0 - vpinsrq $1, _args_digest+1*32(state , idx, 8), %xmm0, %xmm0 - vmovq _args_digest+2*32(state , idx, 8), %xmm1 - vpinsrq $1, _args_digest+3*32(state , idx, 8), %xmm1, %xmm1 - vmovq _args_digest+4*32(state , idx, 8), %xmm2 - vpinsrq $1, _args_digest+5*32(state , idx, 8), %xmm2, %xmm2 - vmovq _args_digest+6*32(state , idx, 8), %xmm3 - vpinsrq $1, _args_digest+7*32(state , idx, 8), %xmm3, %xmm3 - - vmovdqu %xmm0, _result_digest + 0*16(job_rax) - vmovdqu %xmm1, _result_digest + 1*16(job_rax) - vmovdqu %xmm2, _result_digest + 2*16(job_rax) - vmovdqu %xmm3, _result_digest + 3*16(job_rax) - -return: - pop %r12 - pop %rbx - FRAME_END - ret - -return_null: - xor job_rax, job_rax - jmp return -ENDPROC(sha512_mb_mgr_submit_avx2) - -/* UNUSED? -.section .rodata.cst16, "aM", @progbits, 16 -.align 16 -H0: .int 0x6a09e667 -H1: .int 0xbb67ae85 -H2: .int 0x3c6ef372 -H3: .int 0xa54ff53a -H4: .int 0x510e527f -H5: .int 0x9b05688c -H6: .int 0x1f83d9ab -H7: .int 0x5be0cd19 -*/ diff --git a/arch/x86/crypto/sha512-mb/sha512_x4_avx2.S b/arch/x86/crypto/sha512-mb/sha512_x4_avx2.S deleted file mode 100644 index e22e907..00000000 --- a/arch/x86/crypto/sha512-mb/sha512_x4_avx2.S +++ /dev/null @@ -1,531 +0,0 @@ -/* - * Multi-buffer SHA512 algorithm hash compute routine - * - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2016 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * Contact Information: - * Megha Dey <megha.dey(a)linux.intel.com> - * - * BSD LICENSE - * - * Copyright(c) 2016 Intel Corporation. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -# code to compute quad SHA512 using AVX2 -# use YMMs to tackle the larger digest size -# outer calling routine takes care of save and restore of XMM registers -# Logic designed/laid out by JDG - -# Function clobbers: rax, rcx, rdx, rbx, rsi, rdi, r9-r15; ymm0-15 -# Stack must be aligned to 32 bytes before call -# Linux clobbers: rax rbx rcx rsi r8 r9 r10 r11 r12 -# Linux preserves: rcx rdx rdi rbp r13 r14 r15 -# clobbers ymm0-15 - -#include <linux/linkage.h> -#include "sha512_mb_mgr_datastruct.S" - -arg1 = %rdi -arg2 = %rsi - -# Common definitions -STATE = arg1 -INP_SIZE = arg2 - -IDX = %rax -ROUND = %rbx -TBL = %r8 - -inp0 = %r9 -inp1 = %r10 -inp2 = %r11 -inp3 = %r12 - -a = %ymm0 -b = %ymm1 -c = %ymm2 -d = %ymm3 -e = %ymm4 -f = %ymm5 -g = %ymm6 -h = %ymm7 - -a0 = %ymm8 -a1 = %ymm9 -a2 = %ymm10 - -TT0 = %ymm14 -TT1 = %ymm13 -TT2 = %ymm12 -TT3 = %ymm11 -TT4 = %ymm10 -TT5 = %ymm9 - -T1 = %ymm14 -TMP = %ymm15 - -# Define stack usage -STACK_SPACE1 = SZ4*16 + NUM_SHA512_DIGEST_WORDS*SZ4 + 24 - -#define VMOVPD vmovupd -_digest = SZ4*16 - -# transpose r0, r1, r2, r3, t0, t1 -# "transpose" data in {r0..r3} using temps {t0..t3} -# Input looks like: {r0 r1 r2 r3} -# r0 = {a7 a6 a5 a4 a3 a2 a1 a0} -# r1 = {b7 b6 b5 b4 b3 b2 b1 b0} -# r2 = {c7 c6 c5 c4 c3 c2 c1 c0} -# r3 = {d7 d6 d5 d4 d3 d2 d1 d0} -# -# output looks like: {t0 r1 r0 r3} -# t0 = {d1 d0 c1 c0 b1 b0 a1 a0} -# r1 = {d3 d2 c3 c2 b3 b2 a3 a2} -# r0 = {d5 d4 c5 c4 b5 b4 a5 a4} -# r3 = {d7 d6 c7 c6 b7 b6 a7 a6} - -.macro TRANSPOSE r0 r1 r2 r3 t0 t1 - vshufps $0x44, \r1, \r0, \t0 # t0 = {b5 b4 a5 a4 b1 b0 a1 a0} - vshufps $0xEE, \r1, \r0, \r0 # r0 = {b7 b6 a7 a6 b3 b2 a3 a2} - vshufps $0x44, \r3, \r2, \t1 # t1 = {d5 d4 c5 c4 d1 d0 c1 c0} - vshufps $0xEE, \r3, \r2, \r2 # r2 = {d7 d6 c7 c6 d3 d2 c3 c2} - - vperm2f128 $0x20, \r2, \r0, \r1 # h6...a6 - vperm2f128 $0x31, \r2, \r0, \r3 # h2...a2 - vperm2f128 $0x31, \t1, \t0, \r0 # h5...a5 - vperm2f128 $0x20, \t1, \t0, \t0 # h1...a1 -.endm - -.macro ROTATE_ARGS -TMP_ = h -h = g -g = f -f = e -e = d -d = c -c = b -b = a -a = TMP_ -.endm - -# PRORQ reg, imm, tmp -# packed-rotate-right-double -# does a rotate by doing two shifts and an or -.macro _PRORQ reg imm tmp - vpsllq $(64-\imm),\reg,\tmp - vpsrlq $\imm,\reg, \reg - vpor \tmp,\reg, \reg -.endm - -# non-destructive -# PRORQ_nd reg, imm, tmp, src -.macro _PRORQ_nd reg imm tmp src - vpsllq $(64-\imm), \src, \tmp - vpsrlq $\imm, \src, \reg - vpor \tmp, \reg, \reg -.endm - -# PRORQ dst/src, amt -.macro PRORQ reg imm - _PRORQ \reg, \imm, TMP -.endm - -# PRORQ_nd dst, src, amt -.macro PRORQ_nd reg tmp imm - _PRORQ_nd \reg, \imm, TMP, \tmp -.endm - -#; arguments passed implicitly in preprocessor symbols i, a...h -.macro ROUND_00_15 _T1 i - PRORQ_nd a0, e, (18-14) # sig1: a0 = (e >> 4) - - vpxor g, f, a2 # ch: a2 = f^g - vpand e,a2, a2 # ch: a2 = (f^g)&e - vpxor g, a2, a2 # a2 = ch - - PRORQ_nd a1,e,41 # sig1: a1 = (e >> 25) - - offset = SZ4*(\i & 0xf) - vmovdqu \_T1,offset(%rsp) - vpaddq (TBL,ROUND,1), \_T1, \_T1 # T1 = W + K - vpxor e,a0, a0 # sig1: a0 = e ^ (e >> 5) - PRORQ a0, 14 # sig1: a0 = (e >> 6) ^ (e >> 11) - vpaddq a2, h, h # h = h + ch - PRORQ_nd a2,a,6 # sig0: a2 = (a >> 11) - vpaddq \_T1,h, h # h = h + ch + W + K - vpxor a1, a0, a0 # a0 = sigma1 - vmovdqu a,\_T1 - PRORQ_nd a1,a,39 # sig0: a1 = (a >> 22) - vpxor c, \_T1, \_T1 # maj: T1 = a^c - add $SZ4, ROUND # ROUND++ - vpand b, \_T1, \_T1 # maj: T1 = (a^c)&b - vpaddq a0, h, h - vpaddq h, d, d - vpxor a, a2, a2 # sig0: a2 = a ^ (a >> 11) - PRORQ a2,28 # sig0: a2 = (a >> 2) ^ (a >> 13) - vpxor a1, a2, a2 # a2 = sig0 - vpand c, a, a1 # maj: a1 = a&c - vpor \_T1, a1, a1 # a1 = maj - vpaddq a1, h, h # h = h + ch + W + K + maj - vpaddq a2, h, h # h = h + ch + W + K + maj + sigma0 - ROTATE_ARGS -.endm - - -#; arguments passed implicitly in preprocessor symbols i, a...h -.macro ROUND_16_XX _T1 i - vmovdqu SZ4*((\i-15)&0xf)(%rsp), \_T1 - vmovdqu SZ4*((\i-2)&0xf)(%rsp), a1 - vmovdqu \_T1, a0 - PRORQ \_T1,7 - vmovdqu a1, a2 - PRORQ a1,42 - vpxor a0, \_T1, \_T1 - PRORQ \_T1, 1 - vpxor a2, a1, a1 - PRORQ a1, 19 - vpsrlq $7, a0, a0 - vpxor a0, \_T1, \_T1 - vpsrlq $6, a2, a2 - vpxor a2, a1, a1 - vpaddq SZ4*((\i-16)&0xf)(%rsp), \_T1, \_T1 - vpaddq SZ4*((\i-7)&0xf)(%rsp), a1, a1 - vpaddq a1, \_T1, \_T1 - - ROUND_00_15 \_T1,\i -.endm - - -# void sha512_x4_avx2(void *STATE, const int INP_SIZE) -# arg 1 : STATE : pointer to input data -# arg 2 : INP_SIZE : size of data in blocks (assumed >= 1) -ENTRY(sha512_x4_avx2) - # general registers preserved in outer calling routine - # outer calling routine saves all the XMM registers - # save callee-saved clobbered registers to comply with C function ABI - push %r12 - push %r13 - push %r14 - push %r15 - - sub $STACK_SPACE1, %rsp - - # Load the pre-transposed incoming digest. - vmovdqu 0*SHA512_DIGEST_ROW_SIZE(STATE),a - vmovdqu 1*SHA512_DIGEST_ROW_SIZE(STATE),b - vmovdqu 2*SHA512_DIGEST_ROW_SIZE(STATE),c - vmovdqu 3*SHA512_DIGEST_ROW_SIZE(STATE),d - vmovdqu 4*SHA512_DIGEST_ROW_SIZE(STATE),e - vmovdqu 5*SHA512_DIGEST_ROW_SIZE(STATE),f - vmovdqu 6*SHA512_DIGEST_ROW_SIZE(STATE),g - vmovdqu 7*SHA512_DIGEST_ROW_SIZE(STATE),h - - lea K512_4(%rip),TBL - - # load the address of each of the 4 message lanes - # getting ready to transpose input onto stack - mov _data_ptr+0*PTR_SZ(STATE),inp0 - mov _data_ptr+1*PTR_SZ(STATE),inp1 - mov _data_ptr+2*PTR_SZ(STATE),inp2 - mov _data_ptr+3*PTR_SZ(STATE),inp3 - - xor IDX, IDX -lloop: - xor ROUND, ROUND - - # save old digest - vmovdqu a, _digest(%rsp) - vmovdqu b, _digest+1*SZ4(%rsp) - vmovdqu c, _digest+2*SZ4(%rsp) - vmovdqu d, _digest+3*SZ4(%rsp) - vmovdqu e, _digest+4*SZ4(%rsp) - vmovdqu f, _digest+5*SZ4(%rsp) - vmovdqu g, _digest+6*SZ4(%rsp) - vmovdqu h, _digest+7*SZ4(%rsp) - i = 0 -.rep 4 - vmovdqu PSHUFFLE_BYTE_FLIP_MASK(%rip), TMP - VMOVPD i*32(inp0, IDX), TT2 - VMOVPD i*32(inp1, IDX), TT1 - VMOVPD i*32(inp2, IDX), TT4 - VMOVPD i*32(inp3, IDX), TT3 - TRANSPOSE TT2, TT1, TT4, TT3, TT0, TT5 - vpshufb TMP, TT0, TT0 - vpshufb TMP, TT1, TT1 - vpshufb TMP, TT2, TT2 - vpshufb TMP, TT3, TT3 - ROUND_00_15 TT0,(i*4+0) - ROUND_00_15 TT1,(i*4+1) - ROUND_00_15 TT2,(i*4+2) - ROUND_00_15 TT3,(i*4+3) - i = (i+1) -.endr - add $128, IDX - - i = (i*4) - - jmp Lrounds_16_xx -.align 16 -Lrounds_16_xx: -.rep 16 - ROUND_16_XX T1, i - i = (i+1) -.endr - cmp $0xa00,ROUND - jb Lrounds_16_xx - - # add old digest - vpaddq _digest(%rsp), a, a - vpaddq _digest+1*SZ4(%rsp), b, b - vpaddq _digest+2*SZ4(%rsp), c, c - vpaddq _digest+3*SZ4(%rsp), d, d - vpaddq _digest+4*SZ4(%rsp), e, e - vpaddq _digest+5*SZ4(%rsp), f, f - vpaddq _digest+6*SZ4(%rsp), g, g - vpaddq _digest+7*SZ4(%rsp), h, h - - sub $1, INP_SIZE # unit is blocks - jne lloop - - # write back to memory (state object) the transposed digest - vmovdqu a, 0*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu b, 1*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu c, 2*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu d, 3*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu e, 4*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu f, 5*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu g, 6*SHA512_DIGEST_ROW_SIZE(STATE) - vmovdqu h, 7*SHA512_DIGEST_ROW_SIZE(STATE) - - # update input data pointers - add IDX, inp0 - mov inp0, _data_ptr+0*PTR_SZ(STATE) - add IDX, inp1 - mov inp1, _data_ptr+1*PTR_SZ(STATE) - add IDX, inp2 - mov inp2, _data_ptr+2*PTR_SZ(STATE) - add IDX, inp3 - mov inp3, _data_ptr+3*PTR_SZ(STATE) - - #;;;;;;;;;;;;;;; - #; Postamble - add $STACK_SPACE1, %rsp - # restore callee-saved clobbered registers - - pop %r15 - pop %r14 - pop %r13 - pop %r12 - - # outer calling routine restores XMM and other GP registers - ret -ENDPROC(sha512_x4_avx2) - -.section .rodata.K512_4, "a", @progbits -.align 64 -K512_4: - .octa 0x428a2f98d728ae22428a2f98d728ae22,\ - 0x428a2f98d728ae22428a2f98d728ae22 - .octa 0x7137449123ef65cd7137449123ef65cd,\ - 0x7137449123ef65cd7137449123ef65cd - .octa 0xb5c0fbcfec4d3b2fb5c0fbcfec4d3b2f,\ - 0xb5c0fbcfec4d3b2fb5c0fbcfec4d3b2f - .octa 0xe9b5dba58189dbbce9b5dba58189dbbc,\ - 0xe9b5dba58189dbbce9b5dba58189dbbc - .octa 0x3956c25bf348b5383956c25bf348b538,\ - 0x3956c25bf348b5383956c25bf348b538 - .octa 0x59f111f1b605d01959f111f1b605d019,\ - 0x59f111f1b605d01959f111f1b605d019 - .octa 0x923f82a4af194f9b923f82a4af194f9b,\ - 0x923f82a4af194f9b923f82a4af194f9b - .octa 0xab1c5ed5da6d8118ab1c5ed5da6d8118,\ - 0xab1c5ed5da6d8118ab1c5ed5da6d8118 - .octa 0xd807aa98a3030242d807aa98a3030242,\ - 0xd807aa98a3030242d807aa98a3030242 - .octa 0x12835b0145706fbe12835b0145706fbe,\ - 0x12835b0145706fbe12835b0145706fbe - .octa 0x243185be4ee4b28c243185be4ee4b28c,\ - 0x243185be4ee4b28c243185be4ee4b28c - .octa 0x550c7dc3d5ffb4e2550c7dc3d5ffb4e2,\ - 0x550c7dc3d5ffb4e2550c7dc3d5ffb4e2 - .octa 0x72be5d74f27b896f72be5d74f27b896f,\ - 0x72be5d74f27b896f72be5d74f27b896f - .octa 0x80deb1fe3b1696b180deb1fe3b1696b1,\ - 0x80deb1fe3b1696b180deb1fe3b1696b1 - .octa 0x9bdc06a725c712359bdc06a725c71235,\ - 0x9bdc06a725c712359bdc06a725c71235 - .octa 0xc19bf174cf692694c19bf174cf692694,\ - 0xc19bf174cf692694c19bf174cf692694 - .octa 0xe49b69c19ef14ad2e49b69c19ef14ad2,\ - 0xe49b69c19ef14ad2e49b69c19ef14ad2 - .octa 0xefbe4786384f25e3efbe4786384f25e3,\ - 0xefbe4786384f25e3efbe4786384f25e3 - .octa 0x0fc19dc68b8cd5b50fc19dc68b8cd5b5,\ - 0x0fc19dc68b8cd5b50fc19dc68b8cd5b5 - .octa 0x240ca1cc77ac9c65240ca1cc77ac9c65,\ - 0x240ca1cc77ac9c65240ca1cc77ac9c65 - .octa 0x2de92c6f592b02752de92c6f592b0275,\ - 0x2de92c6f592b02752de92c6f592b0275 - .octa 0x4a7484aa6ea6e4834a7484aa6ea6e483,\ - 0x4a7484aa6ea6e4834a7484aa6ea6e483 - .octa 0x5cb0a9dcbd41fbd45cb0a9dcbd41fbd4,\ - 0x5cb0a9dcbd41fbd45cb0a9dcbd41fbd4 - .octa 0x76f988da831153b576f988da831153b5,\ - 0x76f988da831153b576f988da831153b5 - .octa 0x983e5152ee66dfab983e5152ee66dfab,\ - 0x983e5152ee66dfab983e5152ee66dfab - .octa 0xa831c66d2db43210a831c66d2db43210,\ - 0xa831c66d2db43210a831c66d2db43210 - .octa 0xb00327c898fb213fb00327c898fb213f,\ - 0xb00327c898fb213fb00327c898fb213f - .octa 0xbf597fc7beef0ee4bf597fc7beef0ee4,\ - 0xbf597fc7beef0ee4bf597fc7beef0ee4 - .octa 0xc6e00bf33da88fc2c6e00bf33da88fc2,\ - 0xc6e00bf33da88fc2c6e00bf33da88fc2 - .octa 0xd5a79147930aa725d5a79147930aa725,\ - 0xd5a79147930aa725d5a79147930aa725 - .octa 0x06ca6351e003826f06ca6351e003826f,\ - 0x06ca6351e003826f06ca6351e003826f - .octa 0x142929670a0e6e70142929670a0e6e70,\ - 0x142929670a0e6e70142929670a0e6e70 - .octa 0x27b70a8546d22ffc27b70a8546d22ffc,\ - 0x27b70a8546d22ffc27b70a8546d22ffc - .octa 0x2e1b21385c26c9262e1b21385c26c926,\ - 0x2e1b21385c26c9262e1b21385c26c926 - .octa 0x4d2c6dfc5ac42aed4d2c6dfc5ac42aed,\ - 0x4d2c6dfc5ac42aed4d2c6dfc5ac42aed - .octa 0x53380d139d95b3df53380d139d95b3df,\ - 0x53380d139d95b3df53380d139d95b3df - .octa 0x650a73548baf63de650a73548baf63de,\ - 0x650a73548baf63de650a73548baf63de - .octa 0x766a0abb3c77b2a8766a0abb3c77b2a8,\ - 0x766a0abb3c77b2a8766a0abb3c77b2a8 - .octa 0x81c2c92e47edaee681c2c92e47edaee6,\ - 0x81c2c92e47edaee681c2c92e47edaee6 - .octa 0x92722c851482353b92722c851482353b,\ - 0x92722c851482353b92722c851482353b - .octa 0xa2bfe8a14cf10364a2bfe8a14cf10364,\ - 0xa2bfe8a14cf10364a2bfe8a14cf10364 - .octa 0xa81a664bbc423001a81a664bbc423001,\ - 0xa81a664bbc423001a81a664bbc423001 - .octa 0xc24b8b70d0f89791c24b8b70d0f89791,\ - 0xc24b8b70d0f89791c24b8b70d0f89791 - .octa 0xc76c51a30654be30c76c51a30654be30,\ - 0xc76c51a30654be30c76c51a30654be30 - .octa 0xd192e819d6ef5218d192e819d6ef5218,\ - 0xd192e819d6ef5218d192e819d6ef5218 - .octa 0xd69906245565a910d69906245565a910,\ - 0xd69906245565a910d69906245565a910 - .octa 0xf40e35855771202af40e35855771202a,\ - 0xf40e35855771202af40e35855771202a - .octa 0x106aa07032bbd1b8106aa07032bbd1b8,\ - 0x106aa07032bbd1b8106aa07032bbd1b8 - .octa 0x19a4c116b8d2d0c819a4c116b8d2d0c8,\ - 0x19a4c116b8d2d0c819a4c116b8d2d0c8 - .octa 0x1e376c085141ab531e376c085141ab53,\ - 0x1e376c085141ab531e376c085141ab53 - .octa 0x2748774cdf8eeb992748774cdf8eeb99,\ - 0x2748774cdf8eeb992748774cdf8eeb99 - .octa 0x34b0bcb5e19b48a834b0bcb5e19b48a8,\ - 0x34b0bcb5e19b48a834b0bcb5e19b48a8 - .octa 0x391c0cb3c5c95a63391c0cb3c5c95a63,\ - 0x391c0cb3c5c95a63391c0cb3c5c95a63 - .octa 0x4ed8aa4ae3418acb4ed8aa4ae3418acb,\ - 0x4ed8aa4ae3418acb4ed8aa4ae3418acb - .octa 0x5b9cca4f7763e3735b9cca4f7763e373,\ - 0x5b9cca4f7763e3735b9cca4f7763e373 - .octa 0x682e6ff3d6b2b8a3682e6ff3d6b2b8a3,\ - 0x682e6ff3d6b2b8a3682e6ff3d6b2b8a3 - .octa 0x748f82ee5defb2fc748f82ee5defb2fc,\ - 0x748f82ee5defb2fc748f82ee5defb2fc - .octa 0x78a5636f43172f6078a5636f43172f60,\ - 0x78a5636f43172f6078a5636f43172f60 - .octa 0x84c87814a1f0ab7284c87814a1f0ab72,\ - 0x84c87814a1f0ab7284c87814a1f0ab72 - .octa 0x8cc702081a6439ec8cc702081a6439ec,\ - 0x8cc702081a6439ec8cc702081a6439ec - .octa 0x90befffa23631e2890befffa23631e28,\ - 0x90befffa23631e2890befffa23631e28 - .octa 0xa4506cebde82bde9a4506cebde82bde9,\ - 0xa4506cebde82bde9a4506cebde82bde9 - .octa 0xbef9a3f7b2c67915bef9a3f7b2c67915,\ - 0xbef9a3f7b2c67915bef9a3f7b2c67915 - .octa 0xc67178f2e372532bc67178f2e372532b,\ - 0xc67178f2e372532bc67178f2e372532b - .octa 0xca273eceea26619cca273eceea26619c,\ - 0xca273eceea26619cca273eceea26619c - .octa 0xd186b8c721c0c207d186b8c721c0c207,\ - 0xd186b8c721c0c207d186b8c721c0c207 - .octa 0xeada7dd6cde0eb1eeada7dd6cde0eb1e,\ - 0xeada7dd6cde0eb1eeada7dd6cde0eb1e - .octa 0xf57d4f7fee6ed178f57d4f7fee6ed178,\ - 0xf57d4f7fee6ed178f57d4f7fee6ed178 - .octa 0x06f067aa72176fba06f067aa72176fba,\ - 0x06f067aa72176fba06f067aa72176fba - .octa 0x0a637dc5a2c898a60a637dc5a2c898a6,\ - 0x0a637dc5a2c898a60a637dc5a2c898a6 - .octa 0x113f9804bef90dae113f9804bef90dae,\ - 0x113f9804bef90dae113f9804bef90dae - .octa 0x1b710b35131c471b1b710b35131c471b,\ - 0x1b710b35131c471b1b710b35131c471b - .octa 0x28db77f523047d8428db77f523047d84,\ - 0x28db77f523047d8428db77f523047d84 - .octa 0x32caab7b40c7249332caab7b40c72493,\ - 0x32caab7b40c7249332caab7b40c72493 - .octa 0x3c9ebe0a15c9bebc3c9ebe0a15c9bebc,\ - 0x3c9ebe0a15c9bebc3c9ebe0a15c9bebc - .octa 0x431d67c49c100d4c431d67c49c100d4c,\ - 0x431d67c49c100d4c431d67c49c100d4c - .octa 0x4cc5d4becb3e42b64cc5d4becb3e42b6,\ - 0x4cc5d4becb3e42b64cc5d4becb3e42b6 - .octa 0x597f299cfc657e2a597f299cfc657e2a,\ - 0x597f299cfc657e2a597f299cfc657e2a - .octa 0x5fcb6fab3ad6faec5fcb6fab3ad6faec,\ - 0x5fcb6fab3ad6faec5fcb6fab3ad6faec - .octa 0x6c44198c4a4758176c44198c4a475817,\ - 0x6c44198c4a4758176c44198c4a475817 - -.section .rodata.cst32.PSHUFFLE_BYTE_FLIP_MASK, "aM", @progbits, 32 -.align 32 -PSHUFFLE_BYTE_FLIP_MASK: .octa 0x08090a0b0c0d0e0f0001020304050607 - .octa 0x18191a1b1c1d1e1f1011121314151617 diff --git a/crypto/Kconfig b/crypto/Kconfig index 0fb9586..0ec4767 100644 --- a/crypto/Kconfig +++ b/crypto/Kconfig @@ -213,20 +213,6 @@ config CRYPTO_CRYPTD converts an arbitrary synchronous software crypto algorithm into an asynchronous algorithm that executes in a kernel thread. -config CRYPTO_MCRYPTD - tristate "Software async multi-buffer crypto daemon" - select CRYPTO_BLKCIPHER - select CRYPTO_HASH - select CRYPTO_MANAGER - select CRYPTO_WORKQUEUE - help - This is a generic software asynchronous crypto daemon that - provides the kernel thread to assist multi-buffer crypto - algorithms for submitting jobs and flushing jobs in multi-buffer - crypto algorithms. Multi-buffer crypto algorithms are executed - in the context of this kernel thread and drivers can post - their crypto request asynchronously to be processed by this daemon. - config CRYPTO_AUTHENC tristate "Authenc support" select CRYPTO_AEAD @@ -848,54 +834,6 @@ config CRYPTO_SHA1_PPC_SPE SHA-1 secure hash standard (DFIPS 180-4) implemented using powerpc SPE SIMD instruction set. -config CRYPTO_SHA1_MB - tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)" - depends on X86 && 64BIT - select CRYPTO_SHA1 - select CRYPTO_HASH - select CRYPTO_MCRYPTD - help - SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented - using multi-buffer technique. This algorithm computes on - multiple data lanes concurrently with SIMD instructions for - better throughput. It should not be enabled by default but - used when there is significant amount of work to keep the keep - the data lanes filled to get performance benefit. If the data - lanes remain unfilled, a flush operation will be initiated to - process the crypto jobs, adding a slight latency. - -config CRYPTO_SHA256_MB - tristate "SHA256 digest algorithm (x86_64 Multi-Buffer, Experimental)" - depends on X86 && 64BIT - select CRYPTO_SHA256 - select CRYPTO_HASH - select CRYPTO_MCRYPTD - help - SHA-256 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented - using multi-buffer technique. This algorithm computes on - multiple data lanes concurrently with SIMD instructions for - better throughput. It should not be enabled by default but - used when there is significant amount of work to keep the keep - the data lanes filled to get performance benefit. If the data - lanes remain unfilled, a flush operation will be initiated to - process the crypto jobs, adding a slight latency. - -config CRYPTO_SHA512_MB - tristate "SHA512 digest algorithm (x86_64 Multi-Buffer, Experimental)" - depends on X86 && 64BIT - select CRYPTO_SHA512 - select CRYPTO_HASH - select CRYPTO_MCRYPTD - help - SHA-512 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented - using multi-buffer technique. This algorithm computes on - multiple data lanes concurrently with SIMD instructions for - better throughput. It should not be enabled by default but - used when there is significant amount of work to keep the keep - the data lanes filled to get performance benefit. If the data - lanes remain unfilled, a flush operation will be initiated to - process the crypto jobs, adding a slight latency. - config CRYPTO_SHA256 tristate "SHA224 and SHA256 digest algorithm" select CRYPTO_HASH diff --git a/crypto/Makefile b/crypto/Makefile index f6a234d..d719843 100644 --- a/crypto/Makefile +++ b/crypto/Makefile @@ -93,7 +93,6 @@ obj-$(CONFIG_CRYPTO_MORUS640) += morus640.o obj-$(CONFIG_CRYPTO_MORUS1280) += morus1280.o obj-$(CONFIG_CRYPTO_PCRYPT) += pcrypt.o obj-$(CONFIG_CRYPTO_CRYPTD) += cryptd.o -obj-$(CONFIG_CRYPTO_MCRYPTD) += mcryptd.o obj-$(CONFIG_CRYPTO_DES) += des_generic.o obj-$(CONFIG_CRYPTO_FCRYPT) += fcrypt.o obj-$(CONFIG_CRYPTO_BLOWFISH) += blowfish_generic.o diff --git a/crypto/mcryptd.c b/crypto/mcryptd.c deleted file mode 100644 index f141521..00000000 --- a/crypto/mcryptd.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Software multibuffer async crypto daemon. - * - * Copyright (c) 2014 Tim Chen <tim.c.chen(a)linux.intel.com> - * - * Adapted from crypto daemon. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; either version 2 of the License, or (at your option) - * any later version. - * - */ - -#include <crypto/algapi.h> -#include <crypto/internal/hash.h> -#include <crypto/internal/aead.h> -#include <crypto/mcryptd.h> -#include <crypto/crypto_wq.h> -#include <linux/err.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/module.h> -#include <linux/scatterlist.h> -#include <linux/sched.h> -#include <linux/sched/stat.h> -#include <linux/slab.h> - -#define MCRYPTD_MAX_CPU_QLEN 100 -#define MCRYPTD_BATCH 9 - -static void *mcryptd_alloc_instance(struct crypto_alg *alg, unsigned int head, - unsigned int tail); - -struct mcryptd_flush_list { - struct list_head list; - struct mutex lock; -}; - -static struct mcryptd_flush_list __percpu *mcryptd_flist; - -struct hashd_instance_ctx { - struct crypto_ahash_spawn spawn; - struct mcryptd_queue *queue; -}; - -static void mcryptd_queue_worker(struct work_struct *work); - -void mcryptd_arm_flusher(struct mcryptd_alg_cstate *cstate, unsigned long delay) -{ - struct mcryptd_flush_list *flist; - - if (!cstate->flusher_engaged) { - /* put the flusher on the flush list */ - flist = per_cpu_ptr(mcryptd_flist, smp_processor_id()); - mutex_lock(&flist->lock); - list_add_tail(&cstate->flush_list, &flist->list); - cstate->flusher_engaged = true; - cstate->next_flush = jiffies + delay; - queue_delayed_work_on(smp_processor_id(), kcrypto_wq, - &cstate->flush, delay); - mutex_unlock(&flist->lock); - } -} -EXPORT_SYMBOL(mcryptd_arm_flusher); - -static int mcryptd_init_queue(struct mcryptd_queue *queue, - unsigned int max_cpu_qlen) -{ - int cpu; - struct mcryptd_cpu_queue *cpu_queue; - - queue->cpu_queue = alloc_percpu(struct mcryptd_cpu_queue); - pr_debug("mqueue:%p mcryptd_cpu_queue %p\n", queue, queue->cpu_queue); - if (!queue->cpu_queue) - return -ENOMEM; - for_each_possible_cpu(cpu) { - cpu_queue = per_cpu_ptr(queue->cpu_queue, cpu); - pr_debug("cpu_queue #%d %p\n", cpu, queue->cpu_queue); - crypto_init_queue(&cpu_queue->queue, max_cpu_qlen); - INIT_WORK(&cpu_queue->work, mcryptd_queue_worker); - spin_lock_init(&cpu_queue->q_lock); - } - return 0; -} - -static void mcryptd_fini_queue(struct mcryptd_queue *queue) -{ - int cpu; - struct mcryptd_cpu_queue *cpu_queue; - - for_each_possible_cpu(cpu) { - cpu_queue = per_cpu_ptr(queue->cpu_queue, cpu); - BUG_ON(cpu_queue->queue.qlen); - } - free_percpu(queue->cpu_queue); -} - -static int mcryptd_enqueue_request(struct mcryptd_queue *queue, - struct crypto_async_request *request, - struct mcryptd_hash_request_ctx *rctx) -{ - int cpu, err; - struct mcryptd_cpu_queue *cpu_queue; - - cpu_queue = raw_cpu_ptr(queue->cpu_queue); - spin_lock(&cpu_queue->q_lock); - cpu = smp_processor_id(); - rctx->tag.cpu = smp_processor_id(); - - err = crypto_enqueue_request(&cpu_queue->queue, request); - pr_debug("enqueue request: cpu %d cpu_queue %p request %p\n", - cpu, cpu_queue, request); - spin_unlock(&cpu_queue->q_lock); - queue_work_on(cpu, kcrypto_wq, &cpu_queue->work); - - return err; -} - -/* - * Try to opportunisticlly flush the partially completed jobs if - * crypto daemon is the only task running. - */ -static void mcryptd_opportunistic_flush(void) -{ - struct mcryptd_flush_list *flist; - struct mcryptd_alg_cstate *cstate; - - flist = per_cpu_ptr(mcryptd_flist, smp_processor_id()); - while (single_task_running()) { - mutex_lock(&flist->lock); - cstate = list_first_entry_or_null(&flist->list, - struct mcryptd_alg_cstate, flush_list); - if (!cstate || !cstate->flusher_engaged) { - mutex_unlock(&flist->lock); - return; - } - list_del(&cstate->flush_list); - cstate->flusher_engaged = false; - mutex_unlock(&flist->lock); - cstate->alg_state->flusher(cstate); - } -} - -/* - * Called in workqueue context, do one real cryption work (via - * req->complete) and reschedule itself if there are more work to - * do. - */ -static void mcryptd_queue_worker(struct work_struct *work) -{ - struct mcryptd_cpu_queue *cpu_queue; - struct crypto_async_request *req, *backlog; - int i; - - /* - * Need to loop through more than once for multi-buffer to - * be effective. - */ - - cpu_queue = container_of(work, struct mcryptd_cpu_queue, work); - i = 0; - while (i < MCRYPTD_BATCH || single_task_running()) { - - spin_lock_bh(&cpu_queue->q_lock); - backlog = crypto_get_backlog(&cpu_queue->queue); - req = crypto_dequeue_request(&cpu_queue->queue); - spin_unlock_bh(&cpu_queue->q_lock); - - if (!req) { - mcryptd_opportunistic_flush(); - return; - } - - if (backlog) - backlog->complete(backlog, -EINPROGRESS); - req->complete(req, 0); - if (!cpu_queue->queue.qlen) - return; - ++i; - } - if (cpu_queue->queue.qlen) - queue_work_on(smp_processor_id(), kcrypto_wq, &cpu_queue->work); -} - -void mcryptd_flusher(struct work_struct *__work) -{ - struct mcryptd_alg_cstate *alg_cpu_state; - struct mcryptd_alg_state *alg_state; - struct mcryptd_flush_list *flist; - int cpu; - - cpu = smp_processor_id(); - alg_cpu_state = container_of(to_delayed_work(__work), - struct mcryptd_alg_cstate, flush); - alg_state = alg_cpu_state->alg_state; - if (alg_cpu_state->cpu != cpu) - pr_debug("mcryptd error: work on cpu %d, should be cpu %d\n", - cpu, alg_cpu_state->cpu); - - if (alg_cpu_state->flusher_engaged) { - flist = per_cpu_ptr(mcryptd_flist, cpu); - mutex_lock(&flist->lock); - list_del(&alg_cpu_state->flush_list); - alg_cpu_state->flusher_engaged = false; - mutex_unlock(&flist->lock); - alg_state->flusher(alg_cpu_state); - } -} -EXPORT_SYMBOL_GPL(mcryptd_flusher); - -static inline struct mcryptd_queue *mcryptd_get_queue(struct crypto_tfm *tfm) -{ - struct crypto_instance *inst = crypto_tfm_alg_instance(tfm); - struct mcryptd_instance_ctx *ictx = crypto_instance_ctx(inst); - - return ictx->queue; -} - -static void *mcryptd_alloc_instance(struct crypto_alg *alg, unsigned int head, - unsigned int tail) -{ - char *p; - struct crypto_instance *inst; - int err; - - p = kzalloc(head + sizeof(*inst) + tail, GFP_KERNEL); - if (!p) - return ERR_PTR(-ENOMEM); - - inst = (void *)(p + head); - - err = -ENAMETOOLONG; - if (snprintf(inst->alg.cra_driver_name, CRYPTO_MAX_ALG_NAME, - "mcryptd(%s)", alg->cra_driver_name) >= CRYPTO_MAX_ALG_NAME) - goto out_free_inst; - - memcpy(inst->alg.cra_name, alg->cra_name, CRYPTO_MAX_ALG_NAME); - - inst->alg.cra_priority = alg->cra_priority + 50; - inst->alg.cra_blocksize = alg->cra_blocksize; - inst->alg.cra_alignmask = alg->cra_alignmask; - -out: - return p; - -out_free_inst: - kfree(p); - p = ERR_PTR(err); - goto out; -} - -static inline bool mcryptd_check_internal(struct rtattr **tb, u32 *type, - u32 *mask) -{ - struct crypto_attr_type *algt; - - algt = crypto_get_attr_type(tb); - if (IS_ERR(algt)) - return false; - - *type |= algt->type & CRYPTO_ALG_INTERNAL; - *mask |= algt->mask & CRYPTO_ALG_INTERNAL; - - if (*type & *mask & CRYPTO_ALG_INTERNAL) - return true; - else - return false; -} - -static int mcryptd_hash_init_tfm(struct crypto_tfm *tfm) -{ - struct crypto_instance *inst = crypto_tfm_alg_instance(tfm); - struct hashd_instance_ctx *ictx = crypto_instance_ctx(inst); - struct crypto_ahash_spawn *spawn = &ictx->spawn; - struct mcryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm); - struct crypto_ahash *hash; - - hash = crypto_spawn_ahash(spawn); - if (IS_ERR(hash)) - return PTR_ERR(hash); - - ctx->child = hash; - crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct mcryptd_hash_request_ctx) + - crypto_ahash_reqsize(hash)); - return 0; -} - -static void mcryptd_hash_exit_tfm(struct crypto_tfm *tfm) -{ - struct mcryptd_hash_ctx *ctx = crypto_tfm_ctx(tfm); - - crypto_free_ahash(ctx->child); -} - -static int mcryptd_hash_setkey(struct crypto_ahash *parent, - const u8 *key, unsigned int keylen) -{ - struct mcryptd_hash_ctx *ctx = crypto_ahash_ctx(parent); - struct crypto_ahash *child = ctx->child; - int err; - - crypto_ahash_clear_flags(child, CRYPTO_TFM_REQ_MASK); - crypto_ahash_set_flags(child, crypto_ahash_get_flags(parent) & - CRYPTO_TFM_REQ_MASK); - err = crypto_ahash_setkey(child, key, keylen); - crypto_ahash_set_flags(parent, crypto_ahash_get_flags(child) & - CRYPTO_TFM_RES_MASK); - return err; -} - -static int mcryptd_hash_enqueue(struct ahash_request *req, - crypto_completion_t complete) -{ - int ret; - - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); - struct mcryptd_queue *queue = - mcryptd_get_queue(crypto_ahash_tfm(tfm)); - - rctx->complete = req->base.complete; - req->base.complete = complete; - - ret = mcryptd_enqueue_request(queue, &req->base, rctx); - - return ret; -} - -static void mcryptd_hash_init(struct crypto_async_request *req_async, int err) -{ - struct mcryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm); - struct crypto_ahash *child = ctx->child; - struct ahash_request *req = ahash_request_cast(req_async); - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - struct ahash_request *desc = &rctx->areq; - - if (unlikely(err == -EINPROGRESS)) - goto out; - - ahash_request_set_tfm(desc, child); - ahash_request_set_callback(desc, CRYPTO_TFM_REQ_MAY_SLEEP, - rctx->complete, req_async); - - rctx->out = req->result; - err = crypto_ahash_init(desc); - -out: - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); -} - -static int mcryptd_hash_init_enqueue(struct ahash_request *req) -{ - return mcryptd_hash_enqueue(req, mcryptd_hash_init); -} - -static void mcryptd_hash_update(struct crypto_async_request *req_async, int err) -{ - struct ahash_request *req = ahash_request_cast(req_async); - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - - if (unlikely(err == -EINPROGRESS)) - goto out; - - rctx->out = req->result; - err = crypto_ahash_update(&rctx->areq); - if (err) { - req->base.complete = rctx->complete; - goto out; - } - - return; -out: - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); -} - -static int mcryptd_hash_update_enqueue(struct ahash_request *req) -{ - return mcryptd_hash_enqueue(req, mcryptd_hash_update); -} - -static void mcryptd_hash_final(struct crypto_async_request *req_async, int err) -{ - struct ahash_request *req = ahash_request_cast(req_async); - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - - if (unlikely(err == -EINPROGRESS)) - goto out; - - rctx->out = req->result; - err = crypto_ahash_final(&rctx->areq); - if (err) { - req->base.complete = rctx->complete; - goto out; - } - - return; -out: - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); -} - -static int mcryptd_hash_final_enqueue(struct ahash_request *req) -{ - return mcryptd_hash_enqueue(req, mcryptd_hash_final); -} - -static void mcryptd_hash_finup(struct crypto_async_request *req_async, int err) -{ - struct ahash_request *req = ahash_request_cast(req_async); - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - - if (unlikely(err == -EINPROGRESS)) - goto out; - rctx->out = req->result; - err = crypto_ahash_finup(&rctx->areq); - - if (err) { - req->base.complete = rctx->complete; - goto out; - } - - return; -out: - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); -} - -static int mcryptd_hash_finup_enqueue(struct ahash_request *req) -{ - return mcryptd_hash_enqueue(req, mcryptd_hash_finup); -} - -static void mcryptd_hash_digest(struct crypto_async_request *req_async, int err) -{ - struct mcryptd_hash_ctx *ctx = crypto_tfm_ctx(req_async->tfm); - struct crypto_ahash *child = ctx->child; - struct ahash_request *req = ahash_request_cast(req_async); - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - struct ahash_request *desc = &rctx->areq; - - if (unlikely(err == -EINPROGRESS)) - goto out; - - ahash_request_set_tfm(desc, child); - ahash_request_set_callback(desc, CRYPTO_TFM_REQ_MAY_SLEEP, - rctx->complete, req_async); - - rctx->out = req->result; - err = crypto_ahash_init(desc) ?: crypto_ahash_finup(desc); - -out: - local_bh_disable(); - rctx->complete(&req->base, err); - local_bh_enable(); -} - -static int mcryptd_hash_digest_enqueue(struct ahash_request *req) -{ - return mcryptd_hash_enqueue(req, mcryptd_hash_digest); -} - -static int mcryptd_hash_export(struct ahash_request *req, void *out) -{ - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - - return crypto_ahash_export(&rctx->areq, out); -} - -static int mcryptd_hash_import(struct ahash_request *req, const void *in) -{ - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - - return crypto_ahash_import(&rctx->areq, in); -} - -static int mcryptd_create_hash(struct crypto_template *tmpl, struct rtattr **tb, - struct mcryptd_queue *queue) -{ - struct hashd_instance_ctx *ctx; - struct ahash_instance *inst; - struct hash_alg_common *halg; - struct crypto_alg *alg; - u32 type = 0; - u32 mask = 0; - int err; - - if (!mcryptd_check_internal(tb, &type, &mask)) - return -EINVAL; - - halg = ahash_attr_alg(tb[1], type, mask); - if (IS_ERR(halg)) - return PTR_ERR(halg); - - alg = &halg->base; - pr_debug("crypto: mcryptd hash alg: %s\n", alg->cra_name); - inst = mcryptd_alloc_instance(alg, ahash_instance_headroom(), - sizeof(*ctx)); - err = PTR_ERR(inst); - if (IS_ERR(inst)) - goto out_put_alg; - - ctx = ahash_instance_ctx(inst); - ctx->queue = queue; - - err = crypto_init_ahash_spawn(&ctx->spawn, halg, - ahash_crypto_instance(inst)); - if (err) - goto out_free_inst; - - inst->alg.halg.base.cra_flags = CRYPTO_ALG_ASYNC | - (alg->cra_flags & (CRYPTO_ALG_INTERNAL | - CRYPTO_ALG_OPTIONAL_KEY)); - - inst->alg.halg.digestsize = halg->digestsize; - inst->alg.halg.statesize = halg->statesize; - inst->alg.halg.base.cra_ctxsize = sizeof(struct mcryptd_hash_ctx); - - inst->alg.halg.base.cra_init = mcryptd_hash_init_tfm; - inst->alg.halg.base.cra_exit = mcryptd_hash_exit_tfm; - - inst->alg.init = mcryptd_hash_init_enqueue; - inst->alg.update = mcryptd_hash_update_enqueue; - inst->alg.final = mcryptd_hash_final_enqueue; - inst->alg.finup = mcryptd_hash_finup_enqueue; - inst->alg.export = mcryptd_hash_export; - inst->alg.import = mcryptd_hash_import; - if (crypto_hash_alg_has_setkey(halg)) - inst->alg.setkey = mcryptd_hash_setkey; - inst->alg.digest = mcryptd_hash_digest_enqueue; - - err = ahash_register_instance(tmpl, inst); - if (err) { - crypto_drop_ahash(&ctx->spawn); -out_free_inst: - kfree(inst); - } - -out_put_alg: - crypto_mod_put(alg); - return err; -} - -static struct mcryptd_queue mqueue; - -static int mcryptd_create(struct crypto_template *tmpl, struct rtattr **tb) -{ - struct crypto_attr_type *algt; - - algt = crypto_get_attr_type(tb); - if (IS_ERR(algt)) - return PTR_ERR(algt); - - switch (algt->type & algt->mask & CRYPTO_ALG_TYPE_MASK) { - case CRYPTO_ALG_TYPE_DIGEST: - return mcryptd_create_hash(tmpl, tb, &mqueue); - break; - } - - return -EINVAL; -} - -static void mcryptd_free(struct crypto_instance *inst) -{ - struct mcryptd_instance_ctx *ctx = crypto_instance_ctx(inst); - struct hashd_instance_ctx *hctx = crypto_instance_ctx(inst); - - switch (inst->alg.cra_flags & CRYPTO_ALG_TYPE_MASK) { - case CRYPTO_ALG_TYPE_AHASH: - crypto_drop_ahash(&hctx->spawn); - kfree(ahash_instance(inst)); - return; - default: - crypto_drop_spawn(&ctx->spawn); - kfree(inst); - } -} - -static struct crypto_template mcryptd_tmpl = { - .name = "mcryptd", - .create = mcryptd_create, - .free = mcryptd_free, - .module = THIS_MODULE, -}; - -struct mcryptd_ahash *mcryptd_alloc_ahash(const char *alg_name, - u32 type, u32 mask) -{ - char mcryptd_alg_name[CRYPTO_MAX_ALG_NAME]; - struct crypto_ahash *tfm; - - if (snprintf(mcryptd_alg_name, CRYPTO_MAX_ALG_NAME, - "mcryptd(%s)", alg_name) >= CRYPTO_MAX_ALG_NAME) - return ERR_PTR(-EINVAL); - tfm = crypto_alloc_ahash(mcryptd_alg_name, type, mask); - if (IS_ERR(tfm)) - return ERR_CAST(tfm); - if (tfm->base.__crt_alg->cra_module != THIS_MODULE) { - crypto_free_ahash(tfm); - return ERR_PTR(-EINVAL); - } - - return __mcryptd_ahash_cast(tfm); -} -EXPORT_SYMBOL_GPL(mcryptd_alloc_ahash); - -struct crypto_ahash *mcryptd_ahash_child(struct mcryptd_ahash *tfm) -{ - struct mcryptd_hash_ctx *ctx = crypto_ahash_ctx(&tfm->base); - - return ctx->child; -} -EXPORT_SYMBOL_GPL(mcryptd_ahash_child); - -struct ahash_request *mcryptd_ahash_desc(struct ahash_request *req) -{ - struct mcryptd_hash_request_ctx *rctx = ahash_request_ctx(req); - return &rctx->areq; -} -EXPORT_SYMBOL_GPL(mcryptd_ahash_desc); - -void mcryptd_free_ahash(struct mcryptd_ahash *tfm) -{ - crypto_free_ahash(&tfm->base); -} -EXPORT_SYMBOL_GPL(mcryptd_free_ahash); - -static int __init mcryptd_init(void) -{ - int err, cpu; - struct mcryptd_flush_list *flist; - - mcryptd_flist = alloc_percpu(struct mcryptd_flush_list); - for_each_possible_cpu(cpu) { - flist = per_cpu_ptr(mcryptd_flist, cpu); - INIT_LIST_HEAD(&flist->list); - mutex_init(&flist->lock); - } - - err = mcryptd_init_queue(&mqueue, MCRYPTD_MAX_CPU_QLEN); - if (err) { - free_percpu(mcryptd_flist); - return err; - } - - err = crypto_register_template(&mcryptd_tmpl); - if (err) { - mcryptd_fini_queue(&mqueue); - free_percpu(mcryptd_flist); - } - - return err; -} - -static void __exit mcryptd_exit(void) -{ - mcryptd_fini_queue(&mqueue); - crypto_unregister_template(&mcryptd_tmpl); - free_percpu(mcryptd_flist); -} - -subsys_initcall(mcryptd_init); -module_exit(mcryptd_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Software async multibuffer crypto daemon"); -MODULE_ALIAS_CRYPTO("mcryptd"); diff --git a/include/crypto/mcryptd.h b/include/crypto/mcryptd.h deleted file mode 100644 index b67404f..00000000 --- a/include/crypto/mcryptd.h +++ /dev/null @@ -1,114 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Software async multibuffer crypto daemon headers - * - * Author: - * Tim Chen <tim.c.chen(a)linux.intel.com> - * - * Copyright (c) 2014, Intel Corporation. - */ - -#ifndef _CRYPTO_MCRYPT_H -#define _CRYPTO_MCRYPT_H - -#include <linux/crypto.h> -#include <linux/kernel.h> -#include <crypto/hash.h> - -struct mcryptd_ahash { - struct crypto_ahash base; -}; - -static inline struct mcryptd_ahash *__mcryptd_ahash_cast( - struct crypto_ahash *tfm) -{ - return (struct mcryptd_ahash *)tfm; -} - -struct mcryptd_cpu_queue { - struct crypto_queue queue; - spinlock_t q_lock; - struct work_struct work; -}; - -struct mcryptd_queue { - struct mcryptd_cpu_queue __percpu *cpu_queue; -}; - -struct mcryptd_instance_ctx { - struct crypto_spawn spawn; - struct mcryptd_queue *queue; -}; - -struct mcryptd_hash_ctx { - struct crypto_ahash *child; - struct mcryptd_alg_state *alg_state; -}; - -struct mcryptd_tag { - /* seq number of request */ - unsigned seq_num; - /* arrival time of request */ - unsigned long arrival; - unsigned long expire; - int cpu; -}; - -struct mcryptd_hash_request_ctx { - struct list_head waiter; - crypto_completion_t complete; - struct mcryptd_tag tag; - struct crypto_hash_walk walk; - u8 *out; - int flag; - struct ahash_request areq; -}; - -struct mcryptd_ahash *mcryptd_alloc_ahash(const char *alg_name, - u32 type, u32 mask); -struct crypto_ahash *mcryptd_ahash_child(struct mcryptd_ahash *tfm); -struct ahash_request *mcryptd_ahash_desc(struct ahash_request *req); -void mcryptd_free_ahash(struct mcryptd_ahash *tfm); -void mcryptd_flusher(struct work_struct *work); - -enum mcryptd_req_type { - MCRYPTD_NONE, - MCRYPTD_UPDATE, - MCRYPTD_FINUP, - MCRYPTD_DIGEST, - MCRYPTD_FINAL -}; - -struct mcryptd_alg_cstate { - unsigned long next_flush; - unsigned next_seq_num; - bool flusher_engaged; - struct delayed_work flush; - int cpu; - struct mcryptd_alg_state *alg_state; - void *mgr; - spinlock_t work_lock; - struct list_head work_list; - struct list_head flush_list; -}; - -struct mcryptd_alg_state { - struct mcryptd_alg_cstate __percpu *alg_cstate; - unsigned long (*flusher)(struct mcryptd_alg_cstate *cstate); -}; - -/* return delay in jiffies from current time */ -static inline unsigned long get_delay(unsigned long t) -{ - long delay; - - delay = (long) t - (long) jiffies; - if (delay <= 0) - return 0; - else - return (unsigned long) delay; -} - -void mcryptd_arm_flusher(struct mcryptd_alg_cstate *cstate, unsigned long delay); - -#endif -- 1.8.3

1 1

[PATCH 01/55] ASoC: pcm: update FE/BE trigger order based on the command
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> [ Upstream commit acbf27746ecfa96b290b54cc7f05273482ea128a ] Currently, the trigger orders SND_SOC_DPCM_TRIGGER_PRE/POST determine the order in which FE DAI and BE DAI are triggered. In the case of SND_SOC_DPCM_TRIGGER_PRE, the FE DAI is triggered before the BE DAI and in the case of SND_SOC_DPCM_TRIGGER_POST, the BE DAI is triggered before the FE DAI. And this order remains the same irrespective of the trigger command. In the case of the SOF driver, during playback, the FW expects the BE DAI to be triggered before the FE DAI during the START trigger. The BE DAI trigger handles the starting of Link DMA and so it must be started before the FE DAI is started to prevent xruns during pause/release. This can be addressed by setting the trigger order for the FE dai link to SND_SOC_DPCM_TRIGGER_POST. But during the STOP trigger, the FW expects the FE DAI to be triggered before the BE DAI. Retaining the same order during the START and STOP commands, results in FW error as the DAI component in the FW is still active. The issue can be fixed by mirroring the trigger order of FE and BE DAI's during the START and STOP trigger. So, with the trigger order set to SND_SOC_DPCM_TRIGGER_PRE, the FE DAI will be trigger first during SNDRV_PCM_TRIGGER_START/STOP/RESUME and the BE DAI will be triggered first during the STOP/SUSPEND/PAUSE commands. Conversely, with the trigger order set to SND_SOC_DPCM_TRIGGER_POST, the BE DAI will be triggered first during the SNDRV_PCM_TRIGGER_START/STOP/RESUME commands and the FE DAI will be triggered first during the SNDRV_PCM_TRIGGER_STOP/SUSPEND/PAUSE commands. Signed-off-by: Ranjani Sridharan <ranjani.sridharan(a)linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Link: https://lore.kernel.org/r/20191104224812.3393-2-ranjani.sridharan@linux.int… Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- sound/soc/soc-pcm.c | 95 ++++++++++++++++++++++++++++++++++++++--------------- 1 file changed, 68 insertions(+), 27 deletions(-) diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index 53fefa7..f7d4a77 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -2341,42 +2341,81 @@ int dpcm_be_dai_trigger(struct snd_soc_pcm_runtime *fe, int stream, } EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger); +static int dpcm_dai_trigger_fe_be(struct snd_pcm_substream *substream, + int cmd, bool fe_first) +{ + struct snd_soc_pcm_runtime *fe = substream->private_data; + int ret; + + /* call trigger on the frontend before the backend. */ + if (fe_first) { + dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n", + fe->dai_link->name, cmd); + + ret = soc_pcm_trigger(substream, cmd); + if (ret < 0) + return ret; + + ret = dpcm_be_dai_trigger(fe, substream->stream, cmd); + return ret; + } + + /* call trigger on the frontend after the backend. */ + ret = dpcm_be_dai_trigger(fe, substream->stream, cmd); + if (ret < 0) + return ret; + + dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n", + fe->dai_link->name, cmd); + + ret = soc_pcm_trigger(substream, cmd); + + return ret; +} + static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) { struct snd_soc_pcm_runtime *fe = substream->private_data; - int stream = substream->stream, ret; + int stream = substream->stream; + int ret = 0; enum snd_soc_dpcm_trigger trigger = fe->dai_link->trigger[stream]; fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE; switch (trigger) { case SND_SOC_DPCM_TRIGGER_PRE: - /* call trigger on the frontend before the backend. */ - - dev_dbg(fe->dev, "ASoC: pre trigger FE %s cmd %d\n", - fe->dai_link->name, cmd); - - ret = soc_pcm_trigger(substream, cmd); - if (ret < 0) { - dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret); - goto out; + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ret = dpcm_dai_trigger_fe_be(substream, cmd, true); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ret = dpcm_dai_trigger_fe_be(substream, cmd, false); + break; + default: + ret = -EINVAL; + break; } - - ret = dpcm_be_dai_trigger(fe, substream->stream, cmd); break; case SND_SOC_DPCM_TRIGGER_POST: - /* call trigger on the frontend after the backend. */ - - ret = dpcm_be_dai_trigger(fe, substream->stream, cmd); - if (ret < 0) { - dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret); - goto out; + switch (cmd) { + case SNDRV_PCM_TRIGGER_START: + case SNDRV_PCM_TRIGGER_RESUME: + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + ret = dpcm_dai_trigger_fe_be(substream, cmd, false); + break; + case SNDRV_PCM_TRIGGER_STOP: + case SNDRV_PCM_TRIGGER_SUSPEND: + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + ret = dpcm_dai_trigger_fe_be(substream, cmd, true); + break; + default: + ret = -EINVAL; + break; } - - dev_dbg(fe->dev, "ASoC: post trigger FE %s cmd %d\n", - fe->dai_link->name, cmd); - - ret = soc_pcm_trigger(substream, cmd); break; case SND_SOC_DPCM_TRIGGER_BESPOKE: /* bespoke trigger() - handles both FE and BEs */ @@ -2385,10 +2424,6 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) fe->dai_link->name, cmd); ret = soc_pcm_bespoke_trigger(substream, cmd); - if (ret < 0) { - dev_err(fe->dev,"ASoC: trigger FE failed %d\n", ret); - goto out; - } break; default: dev_err(fe->dev, "ASoC: invalid trigger cmd %d for %s\n", cmd, @@ -2397,6 +2432,12 @@ static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd) goto out; } + if (ret < 0) { + dev_err(fe->dev, "ASoC: trigger FE cmd: %d failed: %d\n", + cmd, ret); + goto out; + } + switch (cmd) { case SNDRV_PCM_TRIGGER_START: case SNDRV_PCM_TRIGGER_RESUME: -- 1.8.3

1 54

[PATCH 001/195] Revert "drm/sun4i: dsi: Change the start delay calculation"
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Icenowy Zheng <icenowy(a)aosc.io> [ Upstream commit a00d17e0a71ae2e4fdaac46e1c12785d3346c3f2 ] This reverts commit da676c6aa6413d59ab0a80c97bbc273025e640b2. The original commit adds a start parameter to the calculation of the start delay according to some old BSP versions from Allwinner. However, there're two ways to add this delay -- add it in DSI controller or add it in the TCON. Add it in both controllers won't work. The code before this commit is picked from new versions of BSP kernel, which has a comment for the 1 that says "put start_delay to tcon". By checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has already added this delay, so we shouldn't repeat to add the delay in DSI controller, otherwise the timing won't match. Signed-off-by: Icenowy Zheng <icenowy(a)aosc.io> Reviewed-by: Jagan Teki <jagan(a)amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard(a)kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 97a0573..79eb11c 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -357,8 +357,7 @@ static void sun6i_dsi_inst_init(struct sun6i_dsi *dsi, static u16 sun6i_dsi_get_video_start_delay(struct sun6i_dsi *dsi, struct drm_display_mode *mode) { - u16 start = clamp(mode->vtotal - mode->vdisplay - 10, 8, 100); - u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + start; + u16 delay = mode->vtotal - (mode->vsync_end - mode->vdisplay) + 1; if (delay > mode->vtotal) delay = delay % mode->vtotal; -- 1.8.3

1 194

[PATCH 01/72] vfs: fix do_last() regression
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Al Viro <viro(a)zeniv.linux.org.uk> commit 6404674acd596de41fd3ad5f267b4525494a891a upstream. Brown paperbag time: fetching ->i_uid/->i_mode really should've been done from nd->inode. I even suggested that, but the reason for that has slipped through the cracks and I went for dir->d_inode instead - made for more "obvious" patch. Analysis: - at the entry into do_last() and all the way to step_into(): dir (aka nd->path.dentry) is known not to have been freed; so's nd->inode and it's equal to dir->d_inode unless we are already doomed to -ECHILD. inode of the file to get opened is not known. - after step_into(): inode of the file to get opened is known; dir might be pointing to freed memory/be negative/etc. - at the call of may_create_in_sticky(): guaranteed to be out of RCU mode; inode of the file to get opened is known and pinned; dir might be garbage. The last was the reason for the original patch. Except that at the do_last() entry we can be in RCU mode and it is possible that nd->path.dentry->d_inode has already changed under us. In that case we are going to fail with -ECHILD, but we need to be careful; nd->inode is pointing to valid struct inode and it's the same as nd->path.dentry->d_inode in "won't fail with -ECHILD" case, so we should use that. Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala(a)nokia.com> Reported-by: syzbot+190005201ced78a74ad6(a)syzkaller.appspotmail.com Wearing-brown-paperbag: Al Viro <viro(a)zeniv.linux.org.uk> Cc: stable(a)kernel.org Fixes: d0cb50185ae9 ("do_last(): fetch directory ->i_mode and ->i_uid before it's too late") Signed-off-by: Al Viro <viro(a)zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 1dd68b3..18ddae1 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -3266,8 +3266,8 @@ static int do_last(struct nameidata *nd, struct file *file, const struct open_flags *op) { struct dentry *dir = nd->path.dentry; - kuid_t dir_uid = dir->d_inode->i_uid; - umode_t dir_mode = dir->d_inode->i_mode; + kuid_t dir_uid = nd->inode->i_uid; + umode_t dir_mode = nd->inode->i_mode; int open_flag = op->open_flag; bool will_truncate = (open_flag & O_TRUNC) != 0; bool got_write = false; -- 1.8.3

1 71

[PATCH 001/137] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.8.3

1 136

[PATCH 1/3] mm/memory_hotplug: simplify and fix check_hotplug_memory_range()
by Yang Yingliang 16 Apr '20

16 Apr '20

From: David Hildenbrand <david(a)redhat.com> mainline inclusion from mainline-5.3-rc1 commit cec3ebd083d4e8d161d0b18894c78e3311bcd026 category: bugfix bugzilla: 29418 CVE: NA ------------------------------------------------- Patch series "mm/memory_hotplug: Factor out memory block devicehandling", v3. We only want memory block devices for memory to be onlined/offlined (add/remove from the buddy). This is required so user space can online/offline memory and kdump gets notified about newly onlined memory. Let's factor out creation/removal of memory block devices. This helps to further cleanup arch_add_memory/arch_remove_memory() and to make implementation of new features easier - especially sub-section memory hot add from Dan. Anshuman Khandual is currently working on arch_remove_memory(). I added a temporary solution via "arm64/mm: Add temporary arch_remove_memory() implementation", that is sufficient as a firsts tep in the context of this series. (we don't cleanup page tables in case anything goes wrong already) Did a quick sanity test with DIMM plug/unplug, making sure all devices and sysfs links properly get added/removed. Compile tested on s390x and x86-64. This patch (of 11): By converting start and size to page granularity, we actually ignore unaligned parts within a page instead of properly bailing out with an error. Link: http://lkml.kernel.org/r/20190527111152.16324-2-david@redhat.com Signed-off-by: David Hildenbrand <david(a)redhat.com> Reviewed-by: Dan Williams <dan.j.williams(a)intel.com> Reviewed-by: Wei Yang <richardw.yang(a)linux.intel.com> Reviewed-by: Pavel Tatashin <pasha.tatashin(a)soleen.com> Reviewed-by: Oscar Salvador <osalvador(a)suse.de> Acked-by: Michal Hocko <mhocko(a)suse.com> Cc: David Hildenbrand <david(a)redhat.com> Cc: Qian Cai <cai(a)lca.pw> Cc: Arun KS <arunks(a)codeaurora.org> Cc: Mathieu Malaterre <malat(a)debian.org> Cc: Alex Deucher <alexander.deucher(a)amd.com> Cc: Andrew Banman <andrew.banman(a)hpe.com> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Anshuman Khandual <anshuman.khandual(a)arm.com> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Baoquan He <bhe(a)redhat.com> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Chintan Pandya <cpandya(a)codeaurora.org> Cc: Christophe Leroy <christophe.leroy(a)c-s.fr> Cc: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Fenghua Yu <fenghua.yu(a)intel.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: Heiko Carstens <heiko.carstens(a)de.ibm.com> Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Ingo Molnar <mingo(a)kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Cc: Joonsoo Kim <iamjoonsoo.kim(a)lge.com> Cc: Jun Yao <yaojun8558363(a)gmail.com> Cc: "Kirill A. Shutemov" <kirill.shutemov(a)linux.intel.com> Cc: Logan Gunthorpe <logang(a)deltatee.com> Cc: Mark Brown <broonie(a)kernel.org> Cc: Mark Rutland <mark.rutland(a)arm.com> Cc: Masahiro Yamada <yamada.masahiro(a)socionext.com> Cc: Michael Ellerman <mpe(a)ellerman.id.au> Cc: Mike Rapoport <rppt(a)linux.vnet.ibm.com> Cc: "mike.travis(a)hpe.com" <mike.travis(a)hpe.com> Cc: Nicholas Piggin <npiggin(a)gmail.com> Cc: Paul Mackerras <paulus(a)samba.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: "Rafael J. Wysocki" <rafael(a)kernel.org> Cc: Rich Felker <dalias(a)libc.org> Cc: Rob Herring <robh(a)kernel.org> Cc: Robin Murphy <robin.murphy(a)arm.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Tony Luck <tony.luck(a)intel.com> Cc: Vasily Gorbik <gor(a)linux.ibm.com> Cc: Will Deacon <will.deacon(a)arm.com> Cc: Yoshinori Sato <ysato(a)users.sourceforge.jp> Cc: Yu Zhao <yuzhao(a)google.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/memory_hotplug.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 8a6ad9b..bfd148d 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -1059,16 +1059,11 @@ int try_online_node(int nid) static int check_hotplug_memory_range(u64 start, u64 size) { - unsigned long block_sz = memory_block_size_bytes(); - u64 block_nr_pages = block_sz >> PAGE_SHIFT; - u64 nr_pages = size >> PAGE_SHIFT; - u64 start_pfn = PFN_DOWN(start); - /* memory range must be block size aligned */ - if (!nr_pages || !IS_ALIGNED(start_pfn, block_nr_pages) || - !IS_ALIGNED(nr_pages, block_nr_pages)) { + if (!size || !IS_ALIGNED(start, memory_block_size_bytes()) || + !IS_ALIGNED(size, memory_block_size_bytes())) { pr_err("Block size [%#lx] unaligned hotplug range: start %#llx, size %#llx", - block_sz, start, size); + memory_block_size_bytes(), start, size); return -EINVAL; } -- 1.8.3

1 2

Re: perf spe-c2c record 失败的问题
by Xie XiuQi 16 Apr '20

16 Apr '20

Hi， On 2020/4/16 15:14, haoxin wrote: > 您好，我采用最细的openEuler-1.0测试perf spe-c2c的功能，但是发现/sys/devices下没有arm_spe_0这个目录 > 执行perf spe-c2c record时显示： > event syntax error: 'arm_spe_0/ts_enable=1,pct_enable=1,pa_enable=1,load_filter=1,jitter=1,store_filter=1,min_latency=0/' > \___ Cannot find PMU `arm_spe_0'. Missing kernel support? > > 想问下您这是为什么？需要哪里开启spe功能吗？ > > 确认一下启动参数需要加 kpti=off 还有 BIOS 需要支持 PPTT 2.0 > >

1 0

[PATCH 001/552] Revert "efi: Fix debugobjects warning on 'efi_rts_work'"
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> This reverts commit 3e6b472f474accf757e107919f8ee42e7315ac0d which is commit ef1491e791308317bb9851a0ad380c4a68b58d54 upstream. Chris reports that this commit has problems and should not have been backported to 4.19.y Reported-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Waiman Long <longman(a)redhat.com> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya(a)intel.com> Cc: Linus Torvalds <torvalds(a)linux-foundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: linux-efi(a)vger.kernel.org Cc: Ingo Molnar <mingo(a)kernel.org> Cc: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/firmware/efi/runtime-wrappers.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c index a779342..b9014c8 100644 --- a/drivers/firmware/efi/runtime-wrappers.c +++ b/drivers/firmware/efi/runtime-wrappers.c @@ -95,7 +95,7 @@ struct efi_runtime_work { efi_rts_work.status = EFI_ABORTED; \ \ init_completion(&efi_rts_work.efi_rts_comp); \ - INIT_WORK(&efi_rts_work.work, efi_call_rts); \ + INIT_WORK_ONSTACK(&efi_rts_work.work, efi_call_rts); \ efi_rts_work.arg1 = _arg1; \ efi_rts_work.arg2 = _arg2; \ efi_rts_work.arg3 = _arg3; \ -- 1.8.3

1 551

[PATCH 001/104] ARM: dts: meson8: fix the size of the PMU registers
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> commit 46c9585ed4af688ff1be6d4e76d7ed2f04de4fba upstream. The PMU registers are at least 0x18 bytes wide. Meson8b already uses a size of 0x18. The structure of the PMU registers on Meson8 and Meson8b is similar but not identical. Meson8 and Meson8b have the following registers in common (starting at AOBUS + 0xe0): #define AO_RTI_PWR_A9_CNTL0 0xe0 (0x38 << 2) #define AO_RTI_PWR_A9_CNTL1 0xe4 (0x39 << 2) #define AO_RTI_GEN_PWR_SLEEP0 0xe8 (0x3a << 2) #define AO_RTI_GEN_PWR_ISO0 0x4c (0x3b << 2) Meson8b additionally has these three registers: #define AO_RTI_GEN_PWR_ACK0 0xf0 (0x3c << 2) #define AO_RTI_PWR_A9_MEM_PD0 0xf4 (0x3d << 2) #define AO_RTI_PWR_A9_MEM_PD1 0xf8 (0x3e << 2) Thus we can assume that the register size of the PMU IP blocks is identical on both SoCs (and Meson8 just contains some reserved registers in that area) because the CEC registers start right after the PMU (AO_RTI_*) registers at AOBUS + 0x100 (0x40 << 2). The upcoming power domain driver will need to read and write the AO_RTI_GEN_PWR_SLEEP0 and AO_RTI_GEN_PWR_ISO0 registers, so the updated size is needed for that driver to work. Fixes: 4a5a27116b447d ("ARM: dts: meson8: add support for booting the secondary CPU cores") Signed-off-by: Martin Blumenstingl <martin.blumenstingl(a)googlemail.com> Signed-off-by: Kevin Hilman <khilman(a)baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm/boot/dts/meson8.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 7162e0c..ba78170e7 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -139,7 +139,7 @@ &aobus { pmu: pmu@e0 { compatible = "amlogic,meson8-pmu", "syscon"; - reg = <0xe0 0x8>; + reg = <0xe0 0x18>; }; pinctrl_aobus: pinctrl@84 { -- 1.8.3

1 103

[PATCH 01/74] hidraw: Return EPOLLOUT from hidraw_poll
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Fabian Henneke <fabian.henneke(a)gmail.com> [ Upstream commit 378b80370aa1fe50f9c48a3ac8af3e416e73b89f ] Always return EPOLLOUT from hidraw_poll when a device is connected. This is safe since writes are always possible (but will always block). hidraw does not support non-blocking writes and instead always calls blocking backend functions on write requests. Hence, so far, a call to poll never returned EPOLLOUT, which confuses tools like socat. Signed-off-by: Fabian Henneke <fabian.henneke(a)gmail.com> In-reply-to: <CA+hv5qkyis03CgYTWeWX9cr0my-d2Oe+aZo+mjmWRXgjrGqyrw(a)mail.gmail.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/hid/hidraw.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c index c7cff92..c75b66d 100644 --- a/drivers/hid/hidraw.c +++ b/drivers/hid/hidraw.c @@ -260,7 +260,7 @@ static __poll_t hidraw_poll(struct file *file, poll_table *wait) poll_wait(file, &list->hidraw->wait, wait); if (list->head != list->tail) - return EPOLLIN | EPOLLRDNORM; + return EPOLLIN | EPOLLRDNORM | EPOLLOUT; if (!list->hidraw->exist) return EPOLLERR | EPOLLHUP; return 0; -- 1.8.3

1 73

[PATCH] iommu/arm-smmu: Mark expected switch fall-through
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Anders Roxell <anders.roxell(a)linaro.org> mainline inclusion from mainline-v5.3-rc5 commit 11f4fe9ba3c85a4efac7ec25e75056a9b612d9da category: bugfix bugzilla: 20500 CVE: NA ------------------------------------------------------------------------- Now that -Wimplicit-fallthrough is passed to GCC by default, the following warning shows up: ../drivers/iommu/arm-smmu-v3.c: In function ‘arm_smmu_write_strtab_ent’: ../drivers/iommu/arm-smmu-v3.c:1189:7: warning: this statement may fall through [-Wimplicit-fallthrough=] if (disable_bypass) ^ ../drivers/iommu/arm-smmu-v3.c:1191:3: note: here default: ^~~~~~~ Rework so that the compiler doesn't warn about fall-through. Make it clearer by calling 'BUG_ON()' when disable_bypass is set, and always 'break;' Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org> Acked-by: Will Deacon <will(a)kernel.org> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Zhen Lei <thunder.leizhen(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/arm-smmu-v3.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index e8f7bd3..5ee08ab 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1226,8 +1226,8 @@ static void arm_smmu_write_strtab_ent(struct arm_smmu_device *smmu, u32 sid, ste_live = true; break; case STRTAB_STE_0_CFG_ABORT: - if (disable_bypass) - break; + BUG_ON(!disable_bypass); + break; default: BUG(); /* STE corruption */ } -- 1.8.3

1 0

[PATCH] efi/memreserve: Register reservations as 'reserved' in /proc/iomem
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Ard Biesheuvel <ardb(a)kernel.org> mainline inclusion from mainline-5.5-rc3 commit ab0eb16205b4 category: bugfix bugzilla: 27656 CVE: NA ------------------------------------------------- Memory regions that are reserved using efi_mem_reserve_persistent() are recorded in a special EFI config table which survives kexec, allowing the incoming kernel to honour them as well. However, such reservations are not visible in /proc/iomem, and so the kexec tools that load the incoming kernel and its initrd into memory may overwrite these reserved regions before the incoming kernel has a chance to reserve them from further use. Address this problem by adding these reservations to /proc/iomem as they are created. Note that reservations that are inherited from a previous kernel are memblock_reserve()'d early on, so they are already visible in /proc/iomem. Tested-by: Masayoshi Mizuma <m.mizuma(a)jp.fujitsu.com> Tested-by: Bhupesh Sharma <bhsharma(a)redhat.com> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Reviewed-by: Bhupesh Sharma <bhsharma(a)redhat.com> Cc: <stable(a)vger.kernel.org> # v5.4+ Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Arvind Sankar <nivedita(a)alum.mit.edu> Cc: linux-efi(a)vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-2-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/firmware/efi/efi.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index e304439..f386a78 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -998,6 +998,24 @@ static int __init efi_memreserve_map_root(void) return 0; } +static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size) +{ + struct resource *res, *parent; + + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); + if (!res) + return -ENOMEM; + + res->name = "reserved"; + res->flags = IORESOURCE_MEM; + res->start = addr; + res->end = addr + size - 1; + + /* we expect a conflict with a 'System RAM' region */ + parent = request_resource_conflict(&iomem_resource, res); + return parent ? request_resource(parent, res) : 0; +} + int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) { struct linux_efi_memreserve *rsv; @@ -1022,7 +1040,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) rsv->entry[index].size = size; memunmap(rsv); - return 0; + return efi_mem_reserve_iomem(addr, size); } memunmap(rsv); } @@ -1032,6 +1050,12 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) if (!rsv) return -ENOMEM; + rc = efi_mem_reserve_iomem(__pa(rsv), SZ_4K); + if (rc) { + free_page((unsigned long)rsv); + return rc; + } + /* * The memremap() call above assumes that a linux_efi_memreserve entry * never crosses a page boundary, so let's ensure that this remains true @@ -1048,7 +1072,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) efi_memreserve_root->next = __pa(rsv); spin_unlock(&efi_mem_reserve_persistent_lock); - return 0; + return efi_mem_reserve_iomem(addr, size); } static int __init efi_memreserve_root_init(void) -- 1.8.3

1 0

[PATCH] compat_ioctl: handle SIOCOUTQNSD
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Arnd Bergmann <arnd(a)arndb.de> mainline inclusion from mainline-v5.5-rc1 commit 9d7bf41fafa5b5ddd4c13eb39446b0045f0a8167 category: bugfix bugzilla: 26804 CVE: NA ------------------------------------- Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat mode. Add it to the common socket compat handler along with similar ones. Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent") Cc: Eric Dumazet <edumazet(a)google.com> Cc: netdev(a)vger.kernel.org Cc: "David S. Miller" <davem(a)davemloft.net> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: guodeqing <geffrey.guo(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/socket.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/socket.c b/net/socket.c index 1290aad..1030a61 100644 --- a/net/socket.c +++ b/net/socket.c @@ -3240,6 +3240,7 @@ static int compat_sock_ioctl_trans(struct file *file, struct socket *sock, case SIOCSARP: case SIOCGARP: case SIOCDARP: + case SIOCOUTQNSD: case SIOCATMARK: return sock_do_ioctl(net, sock, cmd, arg); } -- 1.8.3

1 0

[PATCH 01/43] chardev: Avoid potential use-after-free in 'chrdev_open()'
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Will Deacon <will(a)kernel.org> commit 68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream. 'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer. Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning: | ------------[ cut here ]------------ | refcount_t: addition on 0; use-after-free. | WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0 | Modules linked in: | CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 | RIP: 0010:refcount_warn_saturate+0x6d/0xf0 | Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08 | RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282 | RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000 | RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798 | RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039 | R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700 | R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700 | FS: 00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0 | DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 | DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 | Call Trace: | kobject_get+0x5c/0x60 | cdev_get+0x2b/0x60 | chrdev_open+0x55/0x220 | ? cdev_put.part.3+0x20/0x20 | do_dentry_open+0x13a/0x390 | path_openat+0x2c8/0x1470 | do_filp_open+0x93/0x100 | ? selinux_file_ioctl+0x17f/0x220 | do_sys_open+0x186/0x220 | do_syscall_64+0x48/0x150 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 | RIP: 0033:0x7f3b87efcd0e | Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4 | RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 | RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e | RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c | RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000 | R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e | R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000 | ---[ end trace 24f53ca58db8180a ]--- Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly. Cc: Hillf Danton <hdanton(a)sina.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Reported-by: syzbot+82defefbbd8527e1c2cb(a)syzkaller.appspotmail.com Signed-off-by: Will Deacon <will(a)kernel.org> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/char_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/char_dev.c b/fs/char_dev.c index 8a63cfa..5fffd50 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -361,7 +361,7 @@ static struct kobject *cdev_get(struct cdev *p) if (owner && !try_module_get(owner)) return NULL; - kobj = kobject_get(&p->kobj); + kobj = kobject_get_unless_zero(&p->kobj); if (!kobj) module_put(owner); return kobj; -- 1.8.3

1 42

[PATCH] net: hns3: modify the Makefile
by Yang Yingliang 15 Apr '20

15 Apr '20

From: youshengzui <youshengzui(a)huawei.com> driver inclusion category: feature bugzilla: NA CVE: NA ------------------------------ This patch is used to modify the Makefile Signed-off-by: youshengzui <youshengzui(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Junxin Chen <chenjunxin1(a)huawei.com> Reviewed-by: Yongxin Li <liyongxin1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81..f53983e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -28,7 +28,7 @@ ccflags-y += -I$(PWD) \ obj-$(CONFIG_HNS3) += hnae3.o #### compile hns3.ko -HNS3_OBJS = hns3_enet.o \ +HNS3_OBJS = hns3_enet.o \ hns3_ethtool.o \ hns3_debugfs.o HNS3_OBJS_IT = hns-customer/hns3_enet_it.o \ -- 1.8.3

1 0

[PATCH 0/6] Support MPAM ACPI
by Wang ShaoBo 14 Apr '20

14 Apr '20

hulk inclusion category: feature bugzilla: 28055 CVE: NA ------------------------------ MPAM driver temporarily force initializing cache/memory unwillingly, Futher We should make it compatible with P2, P4, P6 machine in the future, it's eager to introduce new method to get MSCs' info from BIOS/DT. Note arm hasn't reached a final conclusion about MPAM ACPI Description, BIOS implemented one temporary version according to v1 spec. MPAM ACPI Table organized as follow: *******Address increased by raw******** [DIE0] Memory node: mc[proximity:0] [DIE1] Memory node: mc[proximity:1] [DIE0] Memory node: mc[proximity:0] [DIE2] Memory node: mc[proximity:2] [DIE3] Memory node: mc[proximity:3] [DIE0] Cache node: cache[PPTT_ref:$a] [PARTITION0] Cache node: cache[PPTT_ref:$a] [PARTITION1] Cache node: cache[PPTT_ref:$a] [PARTITION2] Cache node: cache[PPTT_ref:$a] [PARTITION3] Cache node: cache[PPTT_ref:$a] [PARTITION4] Cache node: cache[PPTT_ref:$a] [PARTITION5] Cache node: cache[PPTT_ref:$a] [PARTITION6] Cache node: cache[PPTT_ref:$a] [PARTITION7] Cache node: cache[PPTT_ref:$a] [DIE1] Cache node: cache[PPTT_ref:$b] [PARTITION0] Cache node: cache[PPTT_ref:$b] [PARTITION1] Cache node: cache[PPTT_ref:$b] ... We use PPTT_ref to decide which DIE the cache node belongs to, and use proximity to decide memory node. it is tricky, but still usefull. James Morse (3): ACPI / processor: Add helper to convert acpi_id to a phys_cpuid ACPI / PPTT: Add helper to validate cache nodes from an offset [dead] ACPI / PPTT: Filthy hack to find _a_ backwards reference in the PPTT [ROTTEN] Wang ShaoBo (3): ACPI / PPTT: cacheinfo: Label caches based on fw_token ACPI 6.x: Add definitions for MPAM table MPAM / ACPI: Refactoring MPAM init process and set MPAM ACPI as entrance arch/arm64/Kconfig | 2 + arch/arm64/include/asm/acpi.h | 4 + arch/arm64/include/asm/mpam_resource.h | 15 +- arch/arm64/include/asm/mpam_sched.h | 8 +- arch/arm64/kernel/mpam.c | 246 ++++++++++++++++++------ drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/mpam.c | 249 +++++++++++++++++++++++++ drivers/acpi/pptt.c | 143 ++++++++++++++ drivers/acpi/processor_core.c | 16 ++ include/acpi/actbl2.h | 58 ++++++ include/acpi/processor.h | 1 + include/linux/acpi.h | 8 + 13 files changed, 698 insertions(+), 56 deletions(-) create mode 100644 drivers/acpi/arm64/mpam.c -- 2.20.1

1 6

[PATCH 1/5] mm/vmalloc.c: keep track of free blocks for vmap allocation
by Yang Yingliang 14 Apr '20

14 Apr '20

From: "Uladzislau Rezki (Sony)" <urezki(a)gmail.com> mainline inclusion from mainline-5.2-rc1 commit 68ad4a3304335358f95a417f2a2b0c909e5119c4 category: bugfix bugzilla: 15766 CVE: NA ------------------------------------------------- Patch series "improve vmap allocation", v3. Objective --------- Please have a look for the description at: https://lkml.org/lkml/2018/10/19/786 but let me also summarize it a bit here as well. The current implementation has O(N) complexity. Requests with different permissive parameters can lead to long allocation time. When i say "long" i mean milliseconds. Description ----------- This approach organizes the KVA memory layout into free areas of the 1-ULONG_MAX range, i.e. an allocation is done over free areas lookups, instead of finding a hole between two busy blocks. It allows to have lower number of objects which represent the free space, therefore to have less fragmented memory allocator. Because free blocks are always as large as possible. It uses the augment tree where all free areas are sorted in ascending order of va->va_start address in pair with linked list that provides O(1) access to prev/next elements. Since the tree is augment, we also maintain the "subtree_max_size" of VA that reflects a maximum available free block in its left or right sub-tree. Knowing that, we can easily traversal toward the lowest (left most path) free area. Allocation: ~O(log(N)) complexity. It is sequential allocation method therefore tends to maximize locality. The search is done until a first suitable block is large enough to encompass the requested parameters. Bigger areas are split. I copy paste here the description of how the area is split, since i described it in https://lkml.org/lkml/2018/10/19/786 <snip> A free block can be split by three different ways. Their names are FL_FIT_TYPE, LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested size and alignment fit to a free block. FL_FIT_TYPE - in this case a free block is just removed from the free list/tree because it fully fits. Comparing with current design there is an extra work with rb-tree updating. LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is just cutting a free block. It is as fast as a current design. Most of the vmalloc allocations just end up with this case, because the edge is always aligned to 1. NE_FIT_TYPE - Is much less common case. Basically it happens when requested size and alignment does not fit left nor right edges, i.e. it is between them. In this case during splitting we have to build a remaining left free area and place it back to the free list/tree. Comparing with current design there are two extra steps. First one is we have to allocate a new vmap_area structure. Second one we have to insert that remaining free block to the address sorted list/tree. In order to optimize a first case there is a cache with free_vmap objects. Instead of allocating from slab we just take an object from the cache and reuse it. Second one is pretty optimized. Since we know a start point in the tree we do not do a search from the top. Instead a traversal begins from a rb-tree node we split. <snip> De-allocation. ~O(log(N)) complexity. An area is not inserted straight away to the tree/list, instead we identify the spot first, checking if it can be merged around neighbors. The list provides O(1) access to prev/next, so it is pretty fast to check it. Summarizing. If merged then large coalesced areas are created, if not the area is just linked making more fragments. There is one more thing that i should mention here. After modification of VA node, its subtree_max_size is updated if it was/is the biggest area in its left or right sub-tree. Apart of that it can also be populated back to upper levels to fix the tree. For more details please have a look at the __augment_tree_propagate_from() function and the description. Tests and stressing ------------------- I use the "test_vmalloc.sh" test driver available under "tools/testing/selftests/vm/" since 5.1-rc1 kernel. Just trigger "sudo ./test_vmalloc.sh" to find out how to deal with it. Tested on different platforms including x86_64/i686/ARM64/x86_64_NUMA. Regarding last one, i do not have any physical access to NUMA system, therefore i emulated it. The time of stressing is days. If you run the test driver in "stress mode", you also need the patch that is in Andrew's tree but not in Linux 5.1-rc1. So, please apply it: http://git.cmpxchg.org/cgit.cgi/linux-mmotm.git/commit/?id=e0cf7749bade6da3… After massive testing, i have not identified any problems like memory leaks, crashes or kernel panics. I find it stable, but more testing would be good. Performance analysis -------------------- I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another is HiKey960(arm64) board. i5-3320M runs on 4.20 kernel, whereas Hikey960 uses 4.15 kernel. I have both system which could run on 5.1-rc1 as well, but the results have not been ready by time i an writing this. Currently it consist of 8 tests. There are three of them which correspond to different types of splitting(to compare with default). We have 3 ones(see above). Another 5 do allocations in different conditions. a) sudo ./test_vmalloc.sh performance When the test driver is run in "performance" mode, it runs all available tests pinned to first online CPU with sequential execution test order. We do it in order to get stable and repeatable results. Take a look at time difference in "long_busy_list_alloc_test". It is not surprising because the worst case is O(N). # i5-3320M How many cycles all tests took: CPU0=646919905370(default) cycles vs CPU0=193290498550(patched) cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_… # Hikey960 8x CPUs How many cycles all tests took: CPU0=3478683207 cycles vs CPU0=463767978 cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_… b) time sudo ./test_vmalloc.sh test_repeat_count=1 With this configuration, all tests are run on all available online CPUs. Before running each CPU shuffles its tests execution order. It gives random allocation behaviour. So it is rough comparison, but it puts in the picture for sure. # i5-3320M <default> vs <patched> real 101m22.813s real 0m56.805s user 0m0.011s user 0m0.015s sys 0m5.076s sys 0m0.023s # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_… # Hikey960 8x CPUs <default> vs <patched> real unknown real 4m25.214s user unknown user 0m0.011s sys unknown sys 0m0.670s I did not manage to complete this test on "default Hikey960" kernel version. After 24 hours it was still running, therefore i had to cancel it. That is why real/user/sys are "unknown". This patch (of 3): Currently an allocation of the new vmap area is done over busy list iteration(complexity O(n)) until a suitable hole is found between two busy areas. Therefore each new allocation causes the list being grown. Due to over fragmented list and different permissive parameters an allocation can take a long time. For example on embedded devices it is milliseconds. This patch organizes the KVA memory layout into free areas of the 1-ULONG_MAX range. It uses an augment red-black tree that keeps blocks sorted by their offsets in pair with linked list keeping the free space in order of increasing addresses. Nodes are augmented with the size of the maximum available free block in its left or right sub-tree. Thus, that allows to take a decision and traversal toward the block that will fit and will have the lowest start address, i.e. it is sequential allocation. Allocation: to allocate a new block a search is done over the tree until a suitable lowest(left most) block is large enough to encompass: the requested size, alignment and vstart point. If the block is bigger than requested size - it is split. De-allocation: when a busy vmap area is freed it can either be merged or inserted to the tree. Red-black tree allows efficiently find a spot whereas a linked list provides a constant-time access to previous and next blocks to check if merging can be done. In case of merging of de-allocated memory chunk a large coalesced area is created. Complexity: ~O(log(N)) [urezki(a)gmail.com: v3] Link: http://lkml.kernel.org/r/20190402162531.10888-2-urezki@gmail.com [urezki(a)gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-2-urezki@gmail.com Link: http://lkml.kernel.org/r/20190321190327.11813-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> Reviewed-by: Roman Gushchin <guro(a)fb.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: Thomas Garnier <thgarnie(a)google.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko(a)sonymobile.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Joel Fernandes <joelaf(a)google.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)elte.hu> Cc: Tejun Heo <tj(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> (cherry picked from commit 68ad4a3304335358f95a417f2a2b0c909e5119c4) Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/vmalloc.h | 6 +- mm/vmalloc.c | 1004 +++++++++++++++++++++++++++++++++++------------ 2 files changed, 763 insertions(+), 247 deletions(-) diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 398e9c9..ad483378 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -45,12 +45,16 @@ struct vm_struct { struct vmap_area { unsigned long va_start; unsigned long va_end; + + /* + * Largest available free size in subtree. + */ + unsigned long subtree_max_size; unsigned long flags; struct rb_node rb_node; /* address sorted rbtree */ struct list_head list; /* address sorted list */ struct llist_node purge_list; /* "lazy purge" list */ struct vm_struct *vm; - struct rcu_head rcu_head; }; /* diff --git a/mm/vmalloc.c b/mm/vmalloc.c index f49ff8a..8b134c0 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -31,6 +31,7 @@ #include <linux/compiler.h> #include <linux/llist.h> #include <linux/bitops.h> +#include <linux/rbtree_augmented.h> #include <linux/uaccess.h> #include <asm/tlbflush.h> @@ -331,14 +332,67 @@ unsigned long vmalloc_to_pfn(const void *vmalloc_addr) LIST_HEAD(vmap_area_list); static LLIST_HEAD(vmap_purge_list); static struct rb_root vmap_area_root = RB_ROOT; +static bool vmap_initialized __read_mostly; -/* The vmap cache globals are protected by vmap_area_lock */ -static struct rb_node *free_vmap_cache; -static unsigned long cached_hole_size; -static unsigned long cached_vstart; -static unsigned long cached_align; +/* + * This kmem_cache is used for vmap_area objects. Instead of + * allocating from slab we reuse an object from this cache to + * make things faster. Especially in "no edge" splitting of + * free block. + */ +static struct kmem_cache *vmap_area_cachep; + +/* + * This linked list is used in pair with free_vmap_area_root. + * It gives O(1) access to prev/next to perform fast coalescing. + */ +static LIST_HEAD(free_vmap_area_list); + +/* + * This augment red-black tree represents the free vmap space. + * All vmap_area objects in this tree are sorted by va->va_start + * address. It is used for allocation and merging when a vmap + * object is released. + * + * Each vmap_area node contains a maximum available free block + * of its sub-tree, right or left. Therefore it is possible to + * find a lowest match of free area. + */ +static struct rb_root free_vmap_area_root = RB_ROOT; + +static __always_inline unsigned long +va_size(struct vmap_area *va) +{ + return (va->va_end - va->va_start); +} + +static __always_inline unsigned long +get_subtree_max_size(struct rb_node *node) +{ + struct vmap_area *va; + + va = rb_entry_safe(node, struct vmap_area, rb_node); + return va ? va->subtree_max_size : 0; +} -static unsigned long vmap_area_pcpu_hole; +/* + * Gets called when remove the node and rotate. + */ +static __always_inline unsigned long +compute_subtree_max_size(struct vmap_area *va) +{ + return max3(va_size(va), + get_subtree_max_size(va->rb_node.rb_left), + get_subtree_max_size(va->rb_node.rb_right)); +} + +RB_DECLARE_CALLBACKS(static, free_vmap_area_rb_augment_cb, + struct vmap_area, rb_node, unsigned long, subtree_max_size, + compute_subtree_max_size) + +static void purge_vmap_area_lazy(void); +static BLOCKING_NOTIFIER_HEAD(vmap_notify_list); +static unsigned long lazy_max_pages(void); static struct vmap_area *__find_vmap_area(unsigned long addr) { @@ -359,41 +413,522 @@ static struct vmap_area *__find_vmap_area(unsigned long addr) return NULL; } -static void __insert_vmap_area(struct vmap_area *va) -{ - struct rb_node **p = &vmap_area_root.rb_node; - struct rb_node *parent = NULL; - struct rb_node *tmp; +/* + * This function returns back addresses of parent node + * and its left or right link for further processing. + */ +static __always_inline struct rb_node ** +find_va_links(struct vmap_area *va, + struct rb_root *root, struct rb_node *from, + struct rb_node **parent) +{ + struct vmap_area *tmp_va; + struct rb_node **link; + + if (root) { + link = &root->rb_node; + if (unlikely(!*link)) { + *parent = NULL; + return link; + } + } else { + link = &from; + } - while (*p) { - struct vmap_area *tmp_va; + /* + * Go to the bottom of the tree. When we hit the last point + * we end up with parent rb_node and correct direction, i name + * it link, where the new va->rb_node will be attached to. + */ + do { + tmp_va = rb_entry(*link, struct vmap_area, rb_node); - parent = *p; - tmp_va = rb_entry(parent, struct vmap_area, rb_node); - if (va->va_start < tmp_va->va_end) - p = &(*p)->rb_left; - else if (va->va_end > tmp_va->va_start) - p = &(*p)->rb_right; + /* + * During the traversal we also do some sanity check. + * Trigger the BUG() if there are sides(left/right) + * or full overlaps. + */ + if (va->va_start < tmp_va->va_end && + va->va_end <= tmp_va->va_start) + link = &(*link)->rb_left; + else if (va->va_end > tmp_va->va_start && + va->va_start >= tmp_va->va_end) + link = &(*link)->rb_right; else BUG(); + } while (*link); + + *parent = &tmp_va->rb_node; + return link; +} + +static __always_inline struct list_head * +get_va_next_sibling(struct rb_node *parent, struct rb_node **link) +{ + struct list_head *list; + + if (unlikely(!parent)) + /* + * The red-black tree where we try to find VA neighbors + * before merging or inserting is empty, i.e. it means + * there is no free vmap space. Normally it does not + * happen but we handle this case anyway. + */ + return NULL; + + list = &rb_entry(parent, struct vmap_area, rb_node)->list; + return (&parent->rb_right == link ? list->next : list); +} + +static __always_inline void +link_va(struct vmap_area *va, struct rb_root *root, + struct rb_node *parent, struct rb_node **link, struct list_head *head) +{ + /* + * VA is still not in the list, but we can + * identify its future previous list_head node. + */ + if (likely(parent)) { + head = &rb_entry(parent, struct vmap_area, rb_node)->list; + if (&parent->rb_right != link) + head = head->prev; } - rb_link_node(&va->rb_node, parent, p); - rb_insert_color(&va->rb_node, &vmap_area_root); + /* Insert to the rb-tree */ + rb_link_node(&va->rb_node, parent, link); + if (root == &free_vmap_area_root) { + /* + * Some explanation here. Just perform simple insertion + * to the tree. We do not set va->subtree_max_size to + * its current size before calling rb_insert_augmented(). + * It is because of we populate the tree from the bottom + * to parent levels when the node _is_ in the tree. + * + * Therefore we set subtree_max_size to zero after insertion, + * to let __augment_tree_propagate_from() puts everything to + * the correct order later on. + */ + rb_insert_augmented(&va->rb_node, + root, &free_vmap_area_rb_augment_cb); + va->subtree_max_size = 0; + } else { + rb_insert_color(&va->rb_node, root); + } - /* address-sort this list */ - tmp = rb_prev(&va->rb_node); - if (tmp) { - struct vmap_area *prev; - prev = rb_entry(tmp, struct vmap_area, rb_node); - list_add_rcu(&va->list, &prev->list); - } else - list_add_rcu(&va->list, &vmap_area_list); + /* Address-sort this list */ + list_add(&va->list, head); } -static void purge_vmap_area_lazy(void); +static __always_inline void +unlink_va(struct vmap_area *va, struct rb_root *root) +{ + /* + * During merging a VA node can be empty, therefore + * not linked with the tree nor list. Just check it. + */ + if (!RB_EMPTY_NODE(&va->rb_node)) { + if (root == &free_vmap_area_root) + rb_erase_augmented(&va->rb_node, + root, &free_vmap_area_rb_augment_cb); + else + rb_erase(&va->rb_node, root); -static BLOCKING_NOTIFIER_HEAD(vmap_notify_list); + list_del(&va->list); + RB_CLEAR_NODE(&va->rb_node); + } +} + +/* + * This function populates subtree_max_size from bottom to upper + * levels starting from VA point. The propagation must be done + * when VA size is modified by changing its va_start/va_end. Or + * in case of newly inserting of VA to the tree. + * + * It means that __augment_tree_propagate_from() must be called: + * - After VA has been inserted to the tree(free path); + * - After VA has been shrunk(allocation path); + * - After VA has been increased(merging path). + * + * Please note that, it does not mean that upper parent nodes + * and their subtree_max_size are recalculated all the time up + * to the root node. + * + * 4--8 + * /\ + * / \ + * / \ + * 2--2 8--8 + * + * For example if we modify the node 4, shrinking it to 2, then + * no any modification is required. If we shrink the node 2 to 1 + * its subtree_max_size is updated only, and set to 1. If we shrink + * the node 8 to 6, then its subtree_max_size is set to 6 and parent + * node becomes 4--6. + */ +static __always_inline void +augment_tree_propagate_from(struct vmap_area *va) +{ + struct rb_node *node = &va->rb_node; + unsigned long new_va_sub_max_size; + + while (node) { + va = rb_entry(node, struct vmap_area, rb_node); + new_va_sub_max_size = compute_subtree_max_size(va); + + /* + * If the newly calculated maximum available size of the + * subtree is equal to the current one, then it means that + * the tree is propagated correctly. So we have to stop at + * this point to save cycles. + */ + if (va->subtree_max_size == new_va_sub_max_size) + break; + + va->subtree_max_size = new_va_sub_max_size; + node = rb_parent(&va->rb_node); + } +} + +static void +insert_vmap_area(struct vmap_area *va, + struct rb_root *root, struct list_head *head) +{ + struct rb_node **link; + struct rb_node *parent; + + link = find_va_links(va, root, NULL, &parent); + link_va(va, root, parent, link, head); +} + +static void +insert_vmap_area_augment(struct vmap_area *va, + struct rb_node *from, struct rb_root *root, + struct list_head *head) +{ + struct rb_node **link; + struct rb_node *parent; + + if (from) + link = find_va_links(va, NULL, from, &parent); + else + link = find_va_links(va, root, NULL, &parent); + + link_va(va, root, parent, link, head); + augment_tree_propagate_from(va); +} + +/* + * Merge de-allocated chunk of VA memory with previous + * and next free blocks. If coalesce is not done a new + * free area is inserted. If VA has been merged, it is + * freed. + */ +static __always_inline void +merge_or_add_vmap_area(struct vmap_area *va, + struct rb_root *root, struct list_head *head) +{ + struct vmap_area *sibling; + struct list_head *next; + struct rb_node **link; + struct rb_node *parent; + bool merged = false; + + /* + * Find a place in the tree where VA potentially will be + * inserted, unless it is merged with its sibling/siblings. + */ + link = find_va_links(va, root, NULL, &parent); + + /* + * Get next node of VA to check if merging can be done. + */ + next = get_va_next_sibling(parent, link); + if (unlikely(next == NULL)) + goto insert; + + /* + * start end + * | | + * |<------VA------>|<-----Next----->| + * | | + * start end + */ + if (next != head) { + sibling = list_entry(next, struct vmap_area, list); + if (sibling->va_start == va->va_end) { + sibling->va_start = va->va_start; + + /* Check and update the tree if needed. */ + augment_tree_propagate_from(sibling); + + /* Remove this VA, it has been merged. */ + unlink_va(va, root); + + /* Free vmap_area object. */ + kmem_cache_free(vmap_area_cachep, va); + + /* Point to the new merged area. */ + va = sibling; + merged = true; + } + } + + /* + * start end + * | | + * |<-----Prev----->|<------VA------>| + * | | + * start end + */ + if (next->prev != head) { + sibling = list_entry(next->prev, struct vmap_area, list); + if (sibling->va_end == va->va_start) { + sibling->va_end = va->va_end; + + /* Check and update the tree if needed. */ + augment_tree_propagate_from(sibling); + + /* Remove this VA, it has been merged. */ + unlink_va(va, root); + + /* Free vmap_area object. */ + kmem_cache_free(vmap_area_cachep, va); + + return; + } + } + +insert: + if (!merged) { + link_va(va, root, parent, link, head); + augment_tree_propagate_from(va); + } +} + +static __always_inline bool +is_within_this_va(struct vmap_area *va, unsigned long size, + unsigned long align, unsigned long vstart) +{ + unsigned long nva_start_addr; + + if (va->va_start > vstart) + nva_start_addr = ALIGN(va->va_start, align); + else + nva_start_addr = ALIGN(vstart, align); + + /* Can be overflowed due to big size or alignment. */ + if (nva_start_addr + size < nva_start_addr || + nva_start_addr < vstart) + return false; + + return (nva_start_addr + size <= va->va_end); +} + +/* + * Find the first free block(lowest start address) in the tree, + * that will accomplish the request corresponding to passing + * parameters. + */ +static __always_inline struct vmap_area * +find_vmap_lowest_match(unsigned long size, + unsigned long align, unsigned long vstart) +{ + struct vmap_area *va; + struct rb_node *node; + unsigned long length; + + /* Start from the root. */ + node = free_vmap_area_root.rb_node; + + /* Adjust the search size for alignment overhead. */ + length = size + align - 1; + + while (node) { + va = rb_entry(node, struct vmap_area, rb_node); + + if (get_subtree_max_size(node->rb_left) >= length && + vstart < va->va_start) { + node = node->rb_left; + } else { + if (is_within_this_va(va, size, align, vstart)) + return va; + + /* + * Does not make sense to go deeper towards the right + * sub-tree if it does not have a free block that is + * equal or bigger to the requested search length. + */ + if (get_subtree_max_size(node->rb_right) >= length) { + node = node->rb_right; + continue; + } + + /* + * OK. We roll back and find the fist right sub-tree, + * that will satisfy the search criteria. It can happen + * only once due to "vstart" restriction. + */ + while ((node = rb_parent(node))) { + va = rb_entry(node, struct vmap_area, rb_node); + if (is_within_this_va(va, size, align, vstart)) + return va; + + if (get_subtree_max_size(node->rb_right) >= length && + vstart <= va->va_start) { + node = node->rb_right; + break; + } + } + } + } + + return NULL; +} + +enum fit_type { + NOTHING_FIT = 0, + FL_FIT_TYPE = 1, /* full fit */ + LE_FIT_TYPE = 2, /* left edge fit */ + RE_FIT_TYPE = 3, /* right edge fit */ + NE_FIT_TYPE = 4 /* no edge fit */ +}; + +static __always_inline enum fit_type +classify_va_fit_type(struct vmap_area *va, + unsigned long nva_start_addr, unsigned long size) +{ + enum fit_type type; + + /* Check if it is within VA. */ + if (nva_start_addr < va->va_start || + nva_start_addr + size > va->va_end) + return NOTHING_FIT; + + /* Now classify. */ + if (va->va_start == nva_start_addr) { + if (va->va_end == nva_start_addr + size) + type = FL_FIT_TYPE; + else + type = LE_FIT_TYPE; + } else if (va->va_end == nva_start_addr + size) { + type = RE_FIT_TYPE; + } else { + type = NE_FIT_TYPE; + } + + return type; +} + +static __always_inline int +adjust_va_to_fit_type(struct vmap_area *va, + unsigned long nva_start_addr, unsigned long size, + enum fit_type type) +{ + struct vmap_area *lva; + + if (type == FL_FIT_TYPE) { + /* + * No need to split VA, it fully fits. + * + * | | + * V NVA V + * |---------------| + */ + unlink_va(va, &free_vmap_area_root); + kmem_cache_free(vmap_area_cachep, va); + } else if (type == LE_FIT_TYPE) { + /* + * Split left edge of fit VA. + * + * | | + * V NVA V R + * |-------|-------| + */ + va->va_start += size; + } else if (type == RE_FIT_TYPE) { + /* + * Split right edge of fit VA. + * + * | | + * L V NVA V + * |-------|-------| + */ + va->va_end = nva_start_addr; + } else if (type == NE_FIT_TYPE) { + /* + * Split no edge of fit VA. + * + * | | + * L V NVA V R + * |---|-------|---| + */ + lva = kmem_cache_alloc(vmap_area_cachep, GFP_NOWAIT); + if (unlikely(!lva)) + return -1; + + /* + * Build the remainder. + */ + lva->va_start = va->va_start; + lva->va_end = nva_start_addr; + + /* + * Shrink this VA to remaining size. + */ + va->va_start = nva_start_addr + size; + } else { + return -1; + } + + if (type != FL_FIT_TYPE) { + augment_tree_propagate_from(va); + + if (type == NE_FIT_TYPE) + insert_vmap_area_augment(lva, &va->rb_node, + &free_vmap_area_root, &free_vmap_area_list); + } + + return 0; +} + +/* + * Returns a start address of the newly allocated area, if success. + * Otherwise a vend is returned that indicates failure. + */ +static __always_inline unsigned long +__alloc_vmap_area(unsigned long size, unsigned long align, + unsigned long vstart, unsigned long vend, int node) +{ + unsigned long nva_start_addr; + struct vmap_area *va; + enum fit_type type; + int ret; + + va = find_vmap_lowest_match(size, align, vstart); + if (unlikely(!va)) + return vend; + + if (va->va_start > vstart) + nva_start_addr = ALIGN(va->va_start, align); + else + nva_start_addr = ALIGN(vstart, align); + + /* Check the "vend" restriction. */ + if (nva_start_addr + size > vend) + return vend; + + /* Classify what we have found. */ + type = classify_va_fit_type(va, nva_start_addr, size); + if (WARN_ON_ONCE(type == NOTHING_FIT)) + return vend; + + /* Update the free vmap_area. */ + ret = adjust_va_to_fit_type(va, nva_start_addr, size, type); + if (ret) + return vend; + + return nva_start_addr; +} /* * Allocate a region of KVA of the specified size and alignment, within the @@ -405,18 +940,19 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, int node, gfp_t gfp_mask) { struct vmap_area *va; - struct rb_node *n; unsigned long addr; int purged = 0; - struct vmap_area *first; BUG_ON(!size); BUG_ON(offset_in_page(size)); BUG_ON(!is_power_of_2(align)); + if (unlikely(!vmap_initialized)) + return ERR_PTR(-EBUSY); + might_sleep(); - va = kmalloc_node(sizeof(struct vmap_area), + va = kmem_cache_alloc_node(vmap_area_cachep, gfp_mask & GFP_RECLAIM_MASK, node); if (unlikely(!va)) return ERR_PTR(-ENOMEM); @@ -429,87 +965,20 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, retry: spin_lock(&vmap_area_lock); - /* - * Invalidate cache if we have more permissive parameters. - * cached_hole_size notes the largest hole noticed _below_ - * the vmap_area cached in free_vmap_cache: if size fits - * into that hole, we want to scan from vstart to reuse - * the hole instead of allocating above free_vmap_cache. - * Note that __free_vmap_area may update free_vmap_cache - * without updating cached_hole_size or cached_align. - */ - if (!free_vmap_cache || - size < cached_hole_size || - vstart < cached_vstart || - align < cached_align) { -nocache: - cached_hole_size = 0; - free_vmap_cache = NULL; - } - /* record if we encounter less permissive parameters */ - cached_vstart = vstart; - cached_align = align; - - /* find starting point for our search */ - if (free_vmap_cache) { - first = rb_entry(free_vmap_cache, struct vmap_area, rb_node); - addr = ALIGN(first->va_end, align); - if (addr < vstart) - goto nocache; - if (addr + size < addr) - goto overflow; - - } else { - addr = ALIGN(vstart, align); - if (addr + size < addr) - goto overflow; - - n = vmap_area_root.rb_node; - first = NULL; - - while (n) { - struct vmap_area *tmp; - tmp = rb_entry(n, struct vmap_area, rb_node); - if (tmp->va_end >= addr) { - first = tmp; - if (tmp->va_start <= addr) - break; - n = n->rb_left; - } else - n = n->rb_right; - } - - if (!first) - goto found; - } - /* from the starting point, walk areas until a suitable hole is found */ - while (addr + size > first->va_start && addr + size <= vend) { - if (addr + cached_hole_size < first->va_start) - cached_hole_size = first->va_start - addr; - addr = ALIGN(first->va_end, align); - if (addr + size < addr) - goto overflow; - - if (list_is_last(&first->list, &vmap_area_list)) - goto found; - - first = list_next_entry(first, list); - } - -found: /* - * Check also calculated address against the vstart, - * because it can be 0 because of big align request. + * If an allocation fails, the "vend" address is + * returned. Therefore trigger the overflow path. */ - if (addr + size > vend || addr < vstart) + addr = __alloc_vmap_area(size, align, vstart, vend, node); + if (unlikely(addr == vend)) goto overflow; va->va_start = addr; va->va_end = addr + size; va->flags = 0; - __insert_vmap_area(va); - free_vmap_cache = &va->rb_node; + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); + spin_unlock(&vmap_area_lock); BUG_ON(!IS_ALIGNED(va->va_start, align)); @@ -538,7 +1007,8 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, if (!(gfp_mask & __GFP_NOWARN) && printk_ratelimit()) pr_warn("vmap allocation for size %lu failed: use vmalloc=<size> to increase size\n", size); - kfree(va); + + kmem_cache_free(vmap_area_cachep, va); return ERR_PTR(-EBUSY); } @@ -558,35 +1028,16 @@ static void __free_vmap_area(struct vmap_area *va) { BUG_ON(RB_EMPTY_NODE(&va->rb_node)); - if (free_vmap_cache) { - if (va->va_end < cached_vstart) { - free_vmap_cache = NULL; - } else { - struct vmap_area *cache; - cache = rb_entry(free_vmap_cache, struct vmap_area, rb_node); - if (va->va_start <= cache->va_start) { - free_vmap_cache = rb_prev(&va->rb_node); - /* - * We don't try to update cached_hole_size or - * cached_align, but it won't go very wrong. - */ - } - } - } - rb_erase(&va->rb_node, &vmap_area_root); - RB_CLEAR_NODE(&va->rb_node); - list_del_rcu(&va->list); - /* - * Track the highest possible candidate for pcpu area - * allocation. Areas outside of vmalloc area can be returned - * here too, consider only end addresses which fall inside - * vmalloc area proper. + * Remove from the busy tree/list. */ - if (va->va_end > VMALLOC_START && va->va_end <= VMALLOC_END) - vmap_area_pcpu_hole = max(vmap_area_pcpu_hole, va->va_end); + unlink_va(va, &vmap_area_root); - kfree_rcu(va, rcu_head); + /* + * Merge VA with its neighbors, otherwise just add it. + */ + merge_or_add_vmap_area(va, + &free_vmap_area_root, &free_vmap_area_list); } /* @@ -787,8 +1238,6 @@ static struct vmap_area *find_vmap_area(unsigned long addr) #define VMAP_BLOCK_SIZE (VMAP_BBMAP_BITS * PAGE_SIZE) -static bool vmap_initialized __read_mostly = false; - struct vmap_block_queue { spinlock_t lock; struct list_head free; @@ -1242,12 +1691,58 @@ void __init vm_area_register_early(struct vm_struct *vm, size_t align) vm_area_add_early(vm); } +static void vmap_init_free_space(void) +{ + unsigned long vmap_start = 1; + const unsigned long vmap_end = ULONG_MAX; + struct vmap_area *busy, *free; + + /* + * B F B B B F + * -|-----|.....|-----|-----|-----|.....|- + * | The KVA space | + * |<--------------------------------->| + */ + list_for_each_entry(busy, &vmap_area_list, list) { + if (busy->va_start - vmap_start > 0) { + free = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (!WARN_ON_ONCE(!free)) { + free->va_start = vmap_start; + free->va_end = busy->va_start; + + insert_vmap_area_augment(free, NULL, + &free_vmap_area_root, + &free_vmap_area_list); + } + } + + vmap_start = busy->va_end; + } + + if (vmap_end - vmap_start > 0) { + free = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (!WARN_ON_ONCE(!free)) { + free->va_start = vmap_start; + free->va_end = vmap_end; + + insert_vmap_area_augment(free, NULL, + &free_vmap_area_root, + &free_vmap_area_list); + } + } +} + void __init vmalloc_init(void) { struct vmap_area *va; struct vm_struct *tmp; int i; + /* + * Create the cache for vmap_area objects. + */ + vmap_area_cachep = KMEM_CACHE(vmap_area, SLAB_PANIC); + for_each_possible_cpu(i) { struct vmap_block_queue *vbq; struct vfree_deferred *p; @@ -1262,16 +1757,21 @@ void __init vmalloc_init(void) /* Import existing vmlist entries. */ for (tmp = vmlist; tmp; tmp = tmp->next) { - va = kzalloc(sizeof(struct vmap_area), GFP_NOWAIT); + va = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (WARN_ON_ONCE(!va)) + continue; + va->flags = VM_VM_AREA; va->va_start = (unsigned long)tmp->addr; va->va_end = va->va_start + tmp->size; va->vm = tmp; - __insert_vmap_area(va); + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); } - vmap_area_pcpu_hole = VMALLOC_END; - + /* + * Now we can initialize a free vmap space. + */ + vmap_init_free_space(); vmap_initialized = true; } @@ -2375,81 +2875,64 @@ static struct vmap_area *node_to_va(struct rb_node *n) } /** - * pvm_find_next_prev - find the next and prev vmap_area surrounding @end - * @end: target address - * @pnext: out arg for the next vmap_area - * @pprev: out arg for the previous vmap_area + * pvm_find_va_enclose_addr - find the vmap_area @addr belongs to + * @addr: target address * - * Returns: %true if either or both of next and prev are found, - * %false if no vmap_area exists - * - * Find vmap_areas end addresses of which enclose @end. ie. if not - * NULL, *pnext->va_end > @end and *pprev->va_end <= @end. + * Returns: vmap_area if it is found. If there is no such area + * the first highest(reverse order) vmap_area is returned + * i.e. va->va_start < addr && va->va_end < addr or NULL + * if there are no any areas before @addr. */ -static bool pvm_find_next_prev(unsigned long end, - struct vmap_area **pnext, - struct vmap_area **pprev) +static struct vmap_area * +pvm_find_va_enclose_addr(unsigned long addr) { - struct rb_node *n = vmap_area_root.rb_node; - struct vmap_area *va = NULL; + struct vmap_area *va, *tmp; + struct rb_node *n; + + n = free_vmap_area_root.rb_node; + va = NULL; while (n) { - va = rb_entry(n, struct vmap_area, rb_node); - if (end < va->va_end) - n = n->rb_left; - else if (end > va->va_end) + tmp = rb_entry(n, struct vmap_area, rb_node); + if (tmp->va_start <= addr) { + va = tmp; + if (tmp->va_end >= addr) + break; + n = n->rb_right; - else - break; + } else { + n = n->rb_left; + } } - if (!va) - return false; - - if (va->va_end > end) { - *pnext = va; - *pprev = node_to_va(rb_prev(&(*pnext)->rb_node)); - } else { - *pprev = va; - *pnext = node_to_va(rb_next(&(*pprev)->rb_node)); - } - return true; + return va; } /** - * pvm_determine_end - find the highest aligned address between two vmap_areas - * @pnext: in/out arg for the next vmap_area - * @pprev: in/out arg for the previous vmap_area - * @align: alignment - * - * Returns: determined end address + * pvm_determine_end_from_reverse - find the highest aligned address + * of free block below VMALLOC_END + * @va: + * in - the VA we start the search(reverse order); + * out - the VA with the highest aligned end address. * - * Find the highest aligned address between *@pnext and *@pprev below - * VMALLOC_END. *@pnext and *@pprev are adjusted so that the aligned - * down address is between the end addresses of the two vmap_areas. - * - * Please note that the address returned by this function may fall - * inside *@pnext vmap_area. The caller is responsible for checking - * that. + * Returns: determined end address within vmap_area */ -static unsigned long pvm_determine_end(struct vmap_area **pnext, - struct vmap_area **pprev, - unsigned long align) +static unsigned long +pvm_determine_end_from_reverse(struct vmap_area **va, unsigned long align) { - const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); + unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); unsigned long addr; - if (*pnext) - addr = min((*pnext)->va_start & ~(align - 1), vmalloc_end); - else - addr = vmalloc_end; - - while (*pprev && (*pprev)->va_end > addr) { - *pnext = *pprev; - *pprev = node_to_va(rb_prev(&(*pnext)->rb_node)); + if (likely(*va)) { + list_for_each_entry_from_reverse((*va), + &free_vmap_area_list, list) { + addr = min((*va)->va_end & ~(align - 1), vmalloc_end); + if ((*va)->va_start < addr) + return addr; + } } - return addr; + return 0; } /** @@ -2469,12 +2952,12 @@ static unsigned long pvm_determine_end(struct vmap_area **pnext, * to gigabytes. To avoid interacting with regular vmallocs, these * areas are allocated from top. * - * Despite its complicated look, this allocator is rather simple. It - * does everything top-down and scans areas from the end looking for - * matching slot. While scanning, if any of the areas overlaps with - * existing vmap_area, the base address is pulled down to fit the - * area. Scanning is repeated till all the areas fit and then all - * necessary data structures are inserted and the result is returned. + * Despite its complicated look, this allocator is rather simple. It + * does everything top-down and scans free blocks from the end looking + * for matching base. While scanning, if any of the areas do not fit the + * base address is pulled down to fit the area. Scanning is repeated till + * all the areas fit and then all necessary data structures are inserted + * and the result is returned. */ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, const size_t *sizes, int nr_vms, @@ -2482,11 +2965,12 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, { const unsigned long vmalloc_start = ALIGN(VMALLOC_START, align); const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); - struct vmap_area **vas, *prev, *next; + struct vmap_area **vas, *va; struct vm_struct **vms; int area, area2, last_area, term_area; - unsigned long base, start, end, last_end; + unsigned long base, start, size, end, last_end; bool purged = false; + enum fit_type type; /* verify parameters and allocate data structures */ BUG_ON(offset_in_page(align) || !is_power_of_2(align)); @@ -2522,7 +3006,7 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, goto err_free2; for (area = 0; area < nr_vms; area++) { - vas[area] = kzalloc(sizeof(struct vmap_area), GFP_KERNEL); + vas[area] = kmem_cache_zalloc(vmap_area_cachep, GFP_KERNEL); vms[area] = kzalloc(sizeof(struct vm_struct), GFP_KERNEL); if (!vas[area] || !vms[area]) goto err_free; @@ -2535,49 +3019,29 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, start = offsets[area]; end = start + sizes[area]; - if (!pvm_find_next_prev(vmap_area_pcpu_hole, &next, &prev)) { - base = vmalloc_end - last_end; - goto found; - } - base = pvm_determine_end(&next, &prev, align) - end; + va = pvm_find_va_enclose_addr(vmalloc_end); + base = pvm_determine_end_from_reverse(&va, align) - end; while (true) { - BUG_ON(next && next->va_end <= base + end); - BUG_ON(prev && prev->va_end > base + end); - /* * base might have underflowed, add last_end before * comparing. */ - if (base + last_end < vmalloc_start + last_end) { - spin_unlock(&vmap_area_lock); - if (!purged) { - purge_vmap_area_lazy(); - purged = true; - goto retry; - } - goto err_free; - } + if (base + last_end < vmalloc_start + last_end) + goto overflow; /* - * If next overlaps, move base downwards so that it's - * right below next and then recheck. + * Fitting base has not been found. */ - if (next && next->va_start < base + end) { - base = pvm_determine_end(&next, &prev, align) - end; - term_area = area; - continue; - } + if (va == NULL) + goto overflow; /* - * If prev overlaps, shift down next and prev and move - * base so that it's right below new next and then - * recheck. + * If this VA does not fit, move base downwards and recheck. */ - if (prev && prev->va_end > base + start) { - next = prev; - prev = node_to_va(rb_prev(&next->rb_node)); - base = pvm_determine_end(&next, &prev, align) - end; + if (base + start < va->va_start || base + end > va->va_end) { + va = node_to_va(rb_prev(&va->rb_node)); + base = pvm_determine_end_from_reverse(&va, align) - end; term_area = area; continue; } @@ -2589,21 +3053,40 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, area = (area + nr_vms - 1) % nr_vms; if (area == term_area) break; + start = offsets[area]; end = start + sizes[area]; - pvm_find_next_prev(base + end, &next, &prev); + va = pvm_find_va_enclose_addr(base + end); } -found: + /* we've found a fitting base, insert all va's */ for (area = 0; area < nr_vms; area++) { - struct vmap_area *va = vas[area]; + int ret; - va->va_start = base + offsets[area]; - va->va_end = va->va_start + sizes[area]; - __insert_vmap_area(va); - } + start = base + offsets[area]; + size = sizes[area]; - vmap_area_pcpu_hole = base + offsets[last_area]; + va = pvm_find_va_enclose_addr(start); + if (WARN_ON_ONCE(va == NULL)) + /* It is a BUG(), but trigger recovery instead. */ + goto recovery; + + type = classify_va_fit_type(va, start, size); + if (WARN_ON_ONCE(type == NOTHING_FIT)) + /* It is a BUG(), but trigger recovery instead. */ + goto recovery; + + ret = adjust_va_to_fit_type(va, start, size, type); + if (unlikely(ret)) + goto recovery; + + /* Allocated area. */ + va = vas[area]; + va->va_start = start; + va->va_end = start + size; + + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); + } spin_unlock(&vmap_area_lock); @@ -2615,9 +3098,38 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, kfree(vas); return vms; +recovery: + /* Remove previously inserted areas. */ + while (area--) { + __free_vmap_area(vas[area]); + vas[area] = NULL; + } + +overflow: + spin_unlock(&vmap_area_lock); + if (!purged) { + purge_vmap_area_lazy(); + purged = true; + + /* Before "retry", check if we recover. */ + for (area = 0; area < nr_vms; area++) { + if (vas[area]) + continue; + + vas[area] = kmem_cache_zalloc( + vmap_area_cachep, GFP_KERNEL); + if (!vas[area]) + goto err_free; + } + + goto retry; + } + err_free: for (area = 0; area < nr_vms; area++) { - kfree(vas[area]); + if (vas[area]) + kmem_cache_free(vmap_area_cachep, vas[area]); + kfree(vms[area]); } err_free2: -- 1.8.3

1 4

[PATCH] tmpfs: separate inode number space for each superblock
by Yang Yingliang 14 Apr '20

14 Apr '20

From: zhengbin <zhengbin13(a)huawei.com> hulk inclusion category: bugfix bugzilla: 16611 CVE: NA --------------------------- The last_ino is unsigned int, who is easy to wrap. Like google, for tmpfs, separate inode number space for each superblock, and change inode number type to unsigned long. see details on https://patchwork.kernel.org/patch/11254001 Signed-off-by: zhengbin <zhengbin13(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/shmem_fs.h | 2 ++ mm/shmem.c | 41 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 1 deletion(-) diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index f155dc6..559cd51 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -38,6 +38,8 @@ struct shmem_sb_info { spinlock_t shrinklist_lock; /* Protects shrinklist */ struct list_head shrinklist; /* List of shinkable inodes */ unsigned long shrinklist_len; /* Length of shrinklist */ + unsigned long __percpu *last_ino_number; /* Last inode number */ + atomic64_t shared_last_ino_number; /* Shared last inode number */ }; static inline struct shmem_inode_info *SHMEM_I(struct inode *inode) diff --git a/mm/shmem.c b/mm/shmem.c index 5b93877..114a2b3 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2207,6 +2207,40 @@ static int shmem_mmap(struct file *file, struct vm_area_struct *vma) return 0; } +#define SHMEM_LAST_INO_BATCH 1024 + +static unsigned long shmem_get_next_ino(struct shmem_sb_info *sbinfo) +{ + unsigned long *p; + unsigned long res; + int cpu; + + cpu = get_cpu(); + p = per_cpu_ptr(sbinfo->last_ino_number, cpu); + res = *p; + +#ifdef CONFIG_SMP + if (unlikely((res & (SHMEM_LAST_INO_BATCH-1)) == 0)) { + /* + * If OS is 32-bit, next will be truncated(Cause + * inode->i_ino is unsigned long, define next to long.) + */ + long next = atomic64_add_return(SHMEM_LAST_INO_BATCH, + &sbinfo->shared_last_ino_number); + + res = next - SHMEM_LAST_INO_BATCH; + } +#endif + + res++; + /* Avoid 0 in the low 32 bits: might appear deleted */ + if (unlikely(!(unsigned int)res)) + res++; + *p = res; + put_cpu(); + return res; +} + static struct inode *shmem_get_inode(struct super_block *sb, const struct inode *dir, umode_t mode, dev_t dev, unsigned long flags) { @@ -2219,7 +2253,7 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode inode = new_inode(sb); if (inode) { - inode->i_ino = get_next_ino(); + inode->i_ino = shmem_get_next_ino(sbinfo); inode_init_owner(inode, dir, mode); inode->i_blocks = 0; inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode); @@ -3534,6 +3568,7 @@ static void shmem_put_super(struct super_block *sb) { struct shmem_sb_info *sbinfo = SHMEM_SB(sb); + free_percpu(sbinfo->last_ino_number); percpu_counter_destroy(&sbinfo->used_blocks); mpol_put(sbinfo->mpol); kfree(sbinfo); @@ -3582,6 +3617,10 @@ int shmem_fill_super(struct super_block *sb, void *data, int silent) spin_lock_init(&sbinfo->stat_lock); if (percpu_counter_init(&sbinfo->used_blocks, 0, GFP_KERNEL)) goto failed; + sbinfo->last_ino_number = alloc_percpu(unsigned long); + if (!sbinfo->last_ino_number) + goto failed; + atomic64_set(&sbinfo->shared_last_ino_number, 0); sbinfo->free_inodes = sbinfo->max_inodes; spin_lock_init(&sbinfo->shrinklist_lock); INIT_LIST_HEAD(&sbinfo->shrinklist); -- 1.8.3

1 0

[PATCH 0/6] Support MPAM ACPI
by Wang ShaoBo 14 Apr '20

14 Apr '20

hulk inclusion category: feature bugzilla: 28055 CVE: NA ------------------------------ MPAM driver temporarily force initializing cache/memory unwillingly, Futher We should make it compatible with P2, P4, P6 machine in the future, it's eager to introduce new method to get MSCs' info from BIOS/DT. Note arm hasn't reached a final conclusion about MPAM ACPI Description, BIOS implemented one temporary version according to v1 spec. MPAM ACPI Table organized as follow: *******Address increased by raw******** [DIE0] Memory node: mc[proximity:0] [DIE1] Memory node: mc[proximity:1] [DIE0] Memory node: mc[proximity:0] [DIE2] Memory node: mc[proximity:2] [DIE3] Memory node: mc[proximity:3] [DIE0] Cache node: cache[PPTT_ref:$a] [PARTITION0] Cache node: cache[PPTT_ref:$a] [PARTITION1] Cache node: cache[PPTT_ref:$a] [PARTITION2] Cache node: cache[PPTT_ref:$a] [PARTITION3] Cache node: cache[PPTT_ref:$a] [PARTITION4] Cache node: cache[PPTT_ref:$a] [PARTITION5] Cache node: cache[PPTT_ref:$a] [PARTITION6] Cache node: cache[PPTT_ref:$a] [PARTITION7] Cache node: cache[PPTT_ref:$a] [DIE1] Cache node: cache[PPTT_ref:$b] [PARTITION0] Cache node: cache[PPTT_ref:$b] [PARTITION1] Cache node: cache[PPTT_ref:$b] ... We use PPTT_ref to decide which DIE the cache node belongs to, and use proximity to decide memory node. it is tricky, but still usefull. James Morse (3): ACPI / processor: Add helper to convert acpi_id to a phys_cpuid ACPI / PPTT: Add helper to validate cache nodes from an offset [dead] ACPI / PPTT: Filthy hack to find _a_ backwards reference in the PPTT [ROTTEN] Wang ShaoBo (3): ACPI / PPTT: cacheinfo: Label caches based on fw_token ACPI 6.x: Add definitions for MPAM table MPAM / ACPI: Refactoring MPAM init process and set MPAM ACPI as entrance arch/arm64/Kconfig | 2 + arch/arm64/include/asm/acpi.h | 4 + arch/arm64/include/asm/mpam_resource.h | 15 +- arch/arm64/include/asm/mpam_sched.h | 8 +- arch/arm64/kernel/mpam.c | 246 ++++++++++++++++++------ drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/mpam.c | 249 +++++++++++++++++++++++++ drivers/acpi/pptt.c | 143 ++++++++++++++ drivers/acpi/processor_core.c | 16 ++ include/acpi/actbl2.h | 58 ++++++ include/acpi/processor.h | 1 + include/linux/acpi.h | 8 + 13 files changed, 698 insertions(+), 56 deletions(-) create mode 100644 drivers/acpi/arm64/mpam.c -- 2.20.1

1 6

关于nvme驱动可靠性优化合入open euler事宜
by Lengchao 13 Apr '20

13 Apr '20

背景说明： NVMe over fabric是存储协议应用的发展方向，业界存储主流厂商均已经发布支持的产品，在测试验证过程中发现一些可靠性问题：基于RHEL/CENT OS 8.0发现如下一些问题： 1、反复闪断端口，主机出现死锁，导致nvme controller卡住，无法恢复，需要重启才能恢复； 2、反复重启存储端服务，主机端crash； 3、通过命令行进行delete controller时导致crash（在nvme over roce连接已经断开时），进行reset controller时导致死锁，controller不能恢复需要重启才能恢复。（在nvme over roce连接已经断开时） 4、 Nvme对于错误码处理考虑不是很完善，在多个不同主机同时对一个存储大压力情况下，存储端需要回复类似busy错误码，在有多路径（DM-Multipath）的情况下会直接向上返回错误码，由于多条路径均返回错误码，导致业务中断或IO归零。 PS：多路径是存储应用必配的。 5、 Nvme 原生多路径对于路径识别采用的机制和传统的多路径软件识别路径方式不同，对于双活支持不友好。PS：双活是存储高可靠应用的典型应用场景。 PS：1、2、3中的问题有多个，其中已经确定部分问题开源社区最新版本已经解决，部分问题未解决，还有部分问题正在分析中； RHEL/CENT OS 8.0内核版本是4.18，open euler最新发布版本的内核版本是4.19，从初步的分析来看，以上问题在open euler均存在。诉求： 1、已经合入社区最新版本的问题，能够快速合入open euler下一个发布版本； 2、对于社区未解决的问题，能够快速推动合入社区，并合入open euler下一个发布版本； 3、针对上述第4、5项，nvme驱动如何优化，并推动合入社区； Open euler对nvme驱动可靠性优化合入的计划是什么样的，如何深度合作快速推动？非常感谢！

2 1

[summit]openEuler Virtual Summit 2020 will be held on Apr. 17th and 18th
by Fred Li 13 Apr '20

13 Apr '20

Hi all, I am exited to announce that openEuler Virtual Summit is coming! Due to COVID-19, we have to hold the first summit virtually, and I believe this is good to all the members' health. Please stay healthy and strong. Please visit https://openeuler.org/zh/summit/2020-virtual-summit.html (Chinese) or https://openeuler.org/en/summit/2020-virtual-summit.html (English) for details. As you can find on the page, there are several pases: 1. From now on to April 9th, it is call for speakers. To emphasize, this is only for Design summit, and please developers to start planning your design summit. 2. From Apr. 10th to 15th, it is open for registration. 3. The summit will be on Apr. 17th and 18th. There will be 2 parts. The first one is summit, and the second one is design summit. On Design summit, the contributors will have a virtual face to face meeting to discuss what we will develop for next release, which is openEuler 20.09 here. openEuler SIGs maintainers, please start to plan the design summit for your SIG with your team. Please note that you will have 2 hours for the meeting. Once confirmed, please send the following information to marketing(a)openeuler.org. Make sure you have subscribed [1]. - group name (SIG name): - chair: - BIO of the chair: - Brief introduction to the meeting: [1] https://mailweb.openeuler.org/postorius/lists/marketing@openeuler.org/ -- Regards Fred Li (李永乐)

7 10

openEuler峰会议题-RaspberryPi
by 方亚芬 11 Apr '20

11 Apr '20

老师，您好。以下是 RaspberryPi SIG 组参与的议题。烦请查收，谢谢。- 组名：树莓派 - 主持人：方亚芬 - 主持人简介：树莓派 SIG 组负责人 - 会议议程简介：本次会议主要介绍如下内容： 1、RaspberryPi SIG 组的背景介绍 2、RaspberryPi SIG 组的当前工作进展包括 openEuler 移植到树莓派的方法、当前存在问题及解决方案 3、后续发展规划 - group name (SIG name): RaspberryPi - chair: YaFen Fang - BIO of the chair: RaspberryPI SIG maintainer. - Brief introduction to the meeting: 1. Background of RaspberryPi SIG group. 2. Current progress of RaspberryPi SIG Include how to migrate openEuler to Raspberry Pi, and how to tackle current problems. 3. Future plan 祝工作顺利，生活愉快。 ------------------------------------------ 方亚芬中国科学院软件研究所智能软件研究中心邮箱：yafen(a)iscas.ac.cn 地址：北京市海淀区中关村南四街4号5楼

2 1

关于优化社区文档的阅读体验，欢迎您的反馈/Optimized the reading experience of document in the community document.Your feedback is welcome
by Junqi?Xie 10 Apr '20

10 Apr '20

关于优化社区文档的阅读体验，欢迎您的反馈： https://gitee.com/openeuler/website/issues/I1E208?from=project-issue issue内容如下：关于文档阅读体验，有如下issue反馈： 1、https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2、https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3、https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue 主要问题点在于： 1、目录结构不易展开 2、文档内容不连续，层级太多且无法顺畅翻页阅读。每次都需要在左侧导航切换希望提供pdf、single page、multi page不同阅读体验 sigle page：一个页面显示一个章节的所有内容，且能够提供页内的索引、目录或者浮动目录 multi page：一个页面内显示一个手册的所有内容。针对这些问题，请大家体验下mindspore资料阅读方式，如果大家认可该方式，openEuler社区文档就按照该框架优化资料阅读内容： https://www.mindspore.cn/tutorial/zh-CN/master/index.html 您是否认可mindspore的阅读体验？或者有更好的建议参考? 【English】 The following issues have been reported regarding document reading experience: 1.https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2.https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3.https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue The main problems are as follows: 1.The directory structure is difficult to expand. 2.The document content is not continuous. There are too many layers and pages cannot be turned smoothly. You need to switch between the navigation tree on the left each time. Different reading experience for PDF, single page, and multi page. sigle page: All contents of a chapter are displayed on a page. In addition, indexes, directories, or floating directories can be provided on the page. multi page: displays all contents of a manual on a page. To solve these problems, please experience the MindSpore documentation reading mode. If you agree with this mode or have made improvements based on this mode, the documentation of the OpenEuler community will be optimized based on this mode. **https://www.mindspore.cn/tutorial/zh-CN/master/index.html ** Do you recognize mindspore's reading experience? Or do you have any better suggestions?

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 08 Apr '20

08 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [简体中文](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction + https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM 兴趣小组 +[English](./sig-mpam.md) | 简体中文 + +MPAM(Memory Partitioning and Monitoring) 是鲲鹏920的新特性，用来控制 Cache, +内存带宽等资源的分配。混部业务场景下共享资源竞争可能会对业务性能造成很大干扰, +MPAM特性，针对LLC及访存带宽进行隔离和限制，可以减少业务间干扰，保障高优先级业务等。 + +## SIG组工作目标和范围 + +- 使能鲲鹏芯片的 MPAM 特性 +- 完善 MPAM 配套工具, 和文档 +- 推动和协助 MPAM 在实际场景中的应用和落地 +- 根据应用场景的诉求改进 MPAM +- 探索 MPAM 的新应用场景 +- 通过更多的应用和测试，推动MPAM驱动进入内核上游社区 + +### 该SIG管理的repository及描述 + +- 项目名称： + - mpam document：https://gitee.com/openeuler/mpam + - mpam 驱动在 kernel 仓库中：https://gitee.com/openeuler/kernel + - 将来会有 mpam 配套用户态工具 + +### 跨领域和面向外部的流程 + + 由该SIG定义和执行的，且跨领域和面向外部的流程和行动： + + - 非内部流程清单 + - 该SIG拥有的面向整个openEulerSIG的组织指导计划等 diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 06 Apr '20

06 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [��](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction +��https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM �� +[English](./sig-mpam.md) | �� + +MPAM(Memory Partitioning and Monitoring) ��920�� Cache, +��, +MPAM��LLC�� + +## SIG�� + +- �� MPAM �� +- �� MPAM ��, �� +- �� MPAM �� +- �� MPAM +- �� MPAM �� +- ��MPAM�� + +### ��SIG��repository�� + +- �� + - mpam document��https://gitee.com/openeuler/mpam + - mpam �� kernel ��https://gitee.com/openeuler/kernel + - �� mpam �� + +### �� + + ��SIG�� + + - �� + - ��SIG��openEulerSIG�� diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

2 1

回复:Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 31 Mar '20

31 Mar '20

Glad to. I will resend a V2. ---------- 该邮件从移动设备发送 --------------原始邮件-------------- 发件人："Xie XiuQi "<xiexiuqi(a)huawei.com>; 发送时间：2020年3月31日(星期二) 上午10:57 收件人："huangdaode" <huangdaode(a)huawei.com>;"Guohanjun (Hanjun Guo)" <guohanjun(a)huawei.com>;"Zhengyuan Liu" <liuzhengyuan(a)tj.kylinos.cn>;"kernel(a)openeuler.org" <kernel(a)openeuler.org>;"lipeng (Y)" <lipeng321(a)huawei.com>; 主题：Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error ----------------------------------- Hi Zhengyuan, Would you please resend a patch to remove those ccflags? Thanks! On 2020/3/31 9:34, huangdaode wrote: > Yes, I don't think we need these flags in open kernel tree, it's for product compile. > > -----邮件原件----- > 发件人: Xiexiuqi > 发送时间: 2020年3月27日 17:14 > 收件人: Guohanjun (Hanjun Guo) <guohanjun(a)huawei.com>; Zhengyuan Liu <liuzhengyuan(a)tj.kylinos.cn>; kernel(a)openeuler.org; huangdaode <huangdaode(a)huawei.com>; lipeng (Y) <lipeng321(a)huawei.com> > 主题: Re: [PATCH] KYLIN: hns3: fix a compilation error > > Hi Li Peng & Daode, > > Please help to check this patch about hns3's Makefile. > > On 2020/3/27 11:38, Hanjun Guo via Kernel wrote: >> On 2020/3/25 9:12, Zhengyuan Liu wrote: >>> >>> >>> On 2020/3/24 下午9:22, Hanjun Guo wrote: >>>> Hi Zhengyuan, >>>> >>>> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>>>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> >>>>> Make stack-protector-strong building flag depend on >>>>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a >>>>> copmilation error: >>>>> >>>>>     MODPOST 1532 modules >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>>>> >>>>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> --- >>>>>   drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>>>>   1 file changed, 2 insertions(+) >>>>> >>>>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> index 6653e81ede9a..f4952f46be7f 100644 >>>>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> @@ -4,7 +4,9 @@ >>>>>   # >>>>>     # Add security options >>>>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>>>>   ccflags-y += -fstack-protector-strong >>>> >>>> I'm not sure why we need this compile option, seems we need to >>>> remove all those ccflags-y in this file, I will take a look and get >>>> back to you. >>> >>> Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. >> >> I think we need to remove those ccflags, could you please send another >> version of the patch? > > Hi, Hanjun, > I agree with you, we do not need this ccflags in kernel tree. > What do you think, Li Peng & Daode? > > @Li Peng, @Huang Daode. > >> >> Thanks >> Hanjun >> _______________________________________________ >> Kernel mailing list -- kernel(a)openeuler.org To unsubscribe send an >> email to kernel-leave(a)openeuler.org >> >

1 0

Re: [PATCH] KYLIN: hns3: fix a compilation error
by Hanjun Guo 31 Mar '20

31 Mar '20

On 2020/3/25 9:12, Zhengyuan Liu wrote: > > > On 2020/3/24 下午9:22, Hanjun Guo wrote: >> Hi Zhengyuan, >> >> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> >>> Make stack-protector-strong building flag depend on >>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could >>> be a copmilation error: >>> >>> MODPOST 1532 modules >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>> >>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> --- >>> drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> index 6653e81ede9a..f4952f46be7f 100644 >>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> @@ -4,7 +4,9 @@ >>> # >>> # Add security options >>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>> ccflags-y += -fstack-protector-strong >> >> I'm not sure why we need this compile option, seems we need to remove >> all those ccflags-y in this file, I will take a look and get back to >> you. > > Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. I think we need to remove those ccflags, could you please send another version of the patch? Thanks Hanjun

3 3

Re: [Tc] SIG组工作审视
by Fred Li 27 Mar '20

27 Mar '20

Happy to see technical committee members will mentor us. Many thanks in advance. On Fri, Mar 27, 2020 at 7:54 PM myeuler <myeuler(a)163.com> wrote: > > Hi, All tc members, Please do the SIG work review according to this list: > 1. xinwei hu : Virt, system-tool, storage, sig-kernel, sig-community > 2. hong xie : sig-bounds_checking_function, sig-ai-bigdata, security-committee, Runtime, Programming-language > 3. hanjun guo : Private, Packaging, oVirt, Others, Networking, > 4. xiuqi Xie : Kernel, kae, iSulad, Infrastructure, doc > 5. hailiang Zhang : Desktop, DB, Container, Computing > 6. Xun Wang : Compiler, Base-service, A-Tune, atune > 7 Wei Xiong : dev-util, Application, sig-template, sig-mate-desktop > > 请各位委员按照上述的分组对SIG组进行审视，审视的内容包含： > 1. SIG组是否正常运作。是否有明确的负责人。 > 2. 相关的项目是否已经有输出，相关软件是否已经进入gitee仓。 > 3. 相关SIG的主页面是否有明确的介绍信息和完善的说明。 > > 下次TC meeting我们审视一下这些SIG的运作，一些SIG是否需要保留或者合并请各位委员给出建议和意见。 > > 谢谢。 > > > > > _______________________________________________ > Tc mailing list -- tc(a)openeuler.org > To unsubscribe send an email to tc-leave(a)openeuler.org -- Regards Fred Li (李永乐)

1 0

re: How to get guaranteed TF for openeuler.org ?
by ETTA 27 Mar '20

27 Mar '20

Here is how, Guranteed TF above 20 or 30 http://www.str8-creative.io/product/trust-flow-seo-package/ That equals immediate higher rankings TF report attached Regards ETTA Unsubscribe option is available on the footer of our website

1 0

[PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 25 Mar '20

25 Mar '20

From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> Make stack-protector-strong building flag depend on CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a copmilation error: MODPOST 1532 modules ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81ede9a..f4952f46be7f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -4,7 +4,9 @@ # # Add security options +ifdef CONFIG_STACKPROTECTOR_STRONG ccflags-y += -fstack-protector-strong +endif ccflags-y += -Wl,-z,relro,-z,now ccflags-y += -Wl,-z,noexecstack ccflags-y += -D_FORTIFY_SOURCE=2 -O2 -- 2.20.1

2 2

[PATCH 0/2] livepatch/core: support jump_label
by Cheng Jian 24 Mar '20

24 Mar '20

livepatch/core: support jump_label Cheng Jian (2): livepatch/core: support jump_label livepatch/core: fix kabi for klp_rel_state include/linux/jump_label.h | 1 + include/linux/module.h | 43 +++++++++++++++++++++++++++++++++++++++++++ kernel/jump_label.c | 16 ++++++++++++++++ kernel/livepatch/core.c | 7 +++++++ kernel/module.c | 5 ++++- 5 files changed, 71 insertions(+), 1 deletion(-) -- 2.7.4

1 2

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:56, haoxin wrote: > 非常感谢您的回复，谢谢，我还想问下，intel rdt resctrl挂载后下有很多配置文件，例如mon_data下的llc_occupancy、mbm_local_bytes、mbm_total_bytes等，这些是在后续会实现还是不再提供类似文件？ > 近期暂时还没有改动，后续支持鲲鹏930的版本可以考虑。当前如果有场景确实需要，以及有效果的话，也可以考虑提供。 > > > > > > 在 2020-03-23 09:38:58，"Xie XiuQi via Kernel" <kernel(a)openeuler.org> 写道： >> >> >>On 2020/3/23 9:15, haoxin wrote: >>> 您好： >>> 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？ >> >>有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 >> >>----- >>1 背景 >>MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. >>Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, >>我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。 >>社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). >> >>2 Quick Start >>Hi620 2P 为例, 其基本情况: >> >>2.1 linux kernel 使能 mpam 特性 >>openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. >>openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. >> >>2.2 挂载 resctrl >>系统启动后, 需要手动 mount resctrl 才能使用. >> >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >>2.3 配置和使用资源组 >>2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way >># 每个目录表示对于的 L3T >>cd /sys/fs/resctrl >> >># 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way >># 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) >>mkdir p1 >>cd p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >># 更多的例子 >># partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) >># mask 16进制 >>mkdir p2 >>cd p2 >>echo "L3:0=30;1=f0;2=30;3=f0" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >>Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； >> >>2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况 >>由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. >> >># p1 分组已存在, 开启 monitor >>echo 1 > /sys/fs/resctrl/p1/ctrlmon >># 观察该组资源的使用情况 >># L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; >># Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) >>grep . /sys/fs/resctrl/p1/mon_data/* >> >>2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) >># task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 task 19 move 到 p1 资源组中 >># 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 >># move 进程时, 已创建的子进程不影响 >>echo 19 > /sys/fs/resctrl/p1/tasks >> >># 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) >>echo $$ > /sys/fs/resctrl/p1/tasks >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p1/tasks >> >>2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) >>即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) >> >># task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 cpu 1 move 到 p2 资源组中 >>echo 1 > /sys/fs/resctrl/p2/cpus_list >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 >>cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 >> >>2.4 内存带宽资源划分 >> >>2.4.1 为 PART 1 设置内存带宽的上限 >># PART 1, 最多使用约 50% 的带宽; >># 0,1,2,3 分别表示 4 个 numa node >># 带宽按照百分比进行设置, 最小粒度是 5% 对齐. >> >>echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata >> >>2.4.3 分配进程(pid)到资源分组 >>挂载 resctrl >>cache 资源划分 >>设置 monitor >>起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) >># 挂载 mpamctrl >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) >># partid=1, mask=f >>mkdir p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >> >># 使用 monitor 1 来监控 part 1 的 cache 使用情况 >># monitor=1, pmg=1, partid=1 >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > p1/tasks >> >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & >> >># lat_mem_rd 测试完成后查看结果. >>如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: >> >>echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata >>测试过程中如果想观察 Cache 的使用情况 >> >>grep . /sys/fs/resctrl/p1/mon_data/L3* >> >>3.2 限制内存带宽的例子 >>步骤: >> >>挂载 resctrl >>限制资源划分 >>设置 monitor >>起测试程序 >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 0/100 表示不限制 >># 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). >>mkdir p1 >>echo "MB:0=30;1=30;2=30;3=30" > p1/schemata >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > /sys/fs/resctrl/p1/tasks >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & >> >># 观察monitor情况 >>cd /sys/fs/resctrl >># monitor=1 >>grep . /sys/fs/resctrl/p1/mon_data/MB* >> >> >>> >>> 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ >>> >>> 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 >>> >>> “num_rmids”: >>> The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. >>> “mon_features”: >>> Lists the monitoring events if monitoring is enabled for the resource. >>> “max_threshold_occupancy”: >>> Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. >>> >>> >>> >>> >>> >>_______________________________________________ >>Kernel mailing list -- kernel(a)openeuler.org >>To unsubscribe send an email to kernel-leave(a)openeuler.org > > > > >

1 0

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:15, haoxin wrote: > 您好： > 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 ----- 1 背景 MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, 我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). 2 Quick Start Hi620 2P 为例, 其基本情况: 2.1 linux kernel 使能 mpam 特性 openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. 2.2 挂载 resctrl 系统启动后, 需要手动 mount resctrl 才能使用. mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl 2.3 配置和使用资源组 2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way # 每个目录表示对于的 L3T cd /sys/fs/resctrl # 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way # 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) mkdir p1 cd p1 echo "L3:0=f;1=f;2=f;3=f" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 # 更多的例子 # partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) # mask 16进制 mkdir p2 cd p2 echo "L3:0=30;1=f0;2=30;3=f0" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； 2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. # p1 分组已存在, 开启 monitor echo 1 > /sys/fs/resctrl/p1/ctrlmon # 观察该组资源的使用情况 # L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; # Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) grep . /sys/fs/resctrl/p1/mon_data/* 2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) # task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 task 19 move 到 p1 资源组中 # 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 # move 进程时, 已创建的子进程不影响 echo 19 > /sys/fs/resctrl/p1/tasks # 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) echo $$ > /sys/fs/resctrl/p1/tasks # 查看 task 的设置情况 cat /sys/fs/resctrl/p1/tasks 2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) 即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) # task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 cpu 1 move 到 p2 资源组中 echo 1 > /sys/fs/resctrl/p2/cpus_list # 查看 task 的设置情况 cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 2.4 内存带宽资源划分 2.4.1 为 PART 1 设置内存带宽的上限 # PART 1, 最多使用约 50% 的带宽; # 0,1,2,3 分别表示 4 个 numa node # 带宽按照百分比进行设置, 最小粒度是 5% 对齐. echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata 2.4.3 分配进程(pid)到资源分组挂载 resctrl cache 资源划分设置 monitor 起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) # 挂载 mpamctrl mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) # partid=1, mask=f mkdir p1 echo "L3:0=f;1=f;2=f;3=f" > schemata # 使用 monitor 1 来监控 part 1 的 cache 使用情况 # monitor=1, pmg=1, partid=1 echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & # lat_mem_rd 测试完成后查看结果. 如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata 测试过程中如果想观察 Cache 的使用情况 grep . /sys/fs/resctrl/p1/mon_data/L3* 3.2 限制内存带宽的例子步骤: 挂载 resctrl 限制资源划分设置 monitor 起测试程序 mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 0/100 表示不限制 # 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). mkdir p1 echo "MB:0=30;1=30;2=30;3=30" > p1/schemata echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > /sys/fs/resctrl/p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & # 观察monitor情况 cd /sys/fs/resctrl # monitor=1 grep . /sys/fs/resctrl/p1/mon_data/MB* > > 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ > > 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 > > “num_rmids”: > The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. > “mon_features”: > Lists the monitoring events if monitoring is enabled for the resource. > “max_threshold_occupancy”: > Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. > > > > >

1 0

[PATCH 0/2] update openeuler_defconfig
by Yang Yingliang 21 Mar '20

21 Mar '20

Xie XiuQi (1): x86/config: enable CONFIG_CFQ_GROUP_IOSCHED Xiongfeng Wang (1): x86/openeuler_config: disable CONFIG_EFI_VARS arch/x86/configs/openeuler_defconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) -- 1.8.3

1 2

[PATCH] btrfs: don't use WARN_ON when ret is -ENOTENT in __btrfs_free_extent()
by Yang Yingliang 20 Mar '20

20 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19039 ------------------------------------------------- Avoid register messages when ret is -ENOTENT. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 47ca1eb..4bf9318 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6793,7 +6793,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, } extent_slot = path->slots[0]; } - } else if (WARN_ON(ret == -ENOENT)) { + } else if (ret == -ENOENT) { btrfs_print_leaf(path->nodes[0]); btrfs_err(info, "unable to find ref byte nr %llu parent %llu root %llu owner %llu offset %llu", -- 1.8.3

1 0

[PATCH v2] cifs: fix panic in smb2_reconnect
by Yang Yingliang 20 Mar '20

20 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-5.2-rc6 commit 0ff2b018b02f category: bugfix bugzilla: 16811 CVE: NA https://gitee.com/src-openeuler/cifs-utils/issues/I1C1QY?from=project-issue ------------------------------------------------- RH Bugzilla: 1702264 We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Conflicts: fs/cifs/cifsproto.h fs/cifs/connect.c [yyl: make cifs_put_smb_ses() extern] --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 975f800..f031420 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2733,8 +2733,7 @@ static int match_session(struct cifs_ses *ses, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 99efb2b..76dfb4f 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2920,9 +2920,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2941,7 +2946,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3

1 0

[PATCH] fs/cifs: cifs fix panic in smb2_reconnect
by linfeilong 19 Mar '20

19 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-v5.1-rc1 commit 0ff2b018b02f89da26a616e0148582321a00fd99 category: bugfix bugzilla: 1702264 CVE: NA ------------------------------------------------- We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. [ 397.787693] CIFS VFS: cifs_mount failed w/return code = -2 [ 403.671998] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 403.672065] PGD 0 P4D 0 [ 403.672087] Oops: 0000 [#1] SMP PTI [ 403.672114] CPU: 3 PID: 47 Comm: kworker/3:1 Kdump: loaded Not tainted 4.19.90-2003.1.1.0033.oe1.x86_64 #1 [ 403.672173] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 403.673038] Workqueue: cifsiod smb2_reconnect_server [cifs] [ 403.673746] RIP: 0010:__list_del_entry_valid+0x25/0x90 [ 403.674448] Code: c3 0f 1f 40 00 48 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 39 c8 74 26 48 b9 00 02 00 00 00 00 ad de 48 39 ca 74 2e <48> 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 [ 403.675955] RSP: 0018:ffffbd48007c3e18 EFLAGS: 00010207 [ 403.676696] RAX: 0000000000000000 RBX: ffffbd48007c3e50 RCX: dead000000000200 [ 403.677447] RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff9bee27f65818 [ 403.678214] RBP: ffffbd48007c3e38 R08: ffff9bee3bba3038 R09: 00000000000002c2 [ 403.679001] R10: ffffbd48006a3d90 R11: 0000000000000000 R12: ffff9bee27f66818 [ 403.679811] R13: 0000000000000001 R14: ffff9bee27f65800 R15: ffff9bee27f65818 [ 403.680639] FS: 0000000000000000(0000) GS:ffff9bee3bb80000(0000) knlGS:0000000000000000 [ 403.681505] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 403.682391] CR2: 0000000000000000 CR3: 000000003040a005 CR4: 00000000003606e0 [ 403.683315] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 403.684247] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 403.685181] Call Trace: [ 403.686141] smb2_reconnect_server+0x17a/0x340 [cifs] [ 403.687118] process_one_work+0x195/0x3d0 [ 403.688102] worker_thread+0x30/0x390 [ 403.689096] ? process_one_work+0x3d0/0x3d0 [ 403.690111] kthread+0x113/0x130 [ 403.691132] ? kthread_create_worker_on_cpu+0x70/0x70 [ 403.692181] ret_from_fork+0x35/0x40 Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Feilong Lin <linfeilong(a)huawei.com> --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7e85070..2e46a8a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2732,8 +2732,7 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 30417d4..97995b2 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2914,9 +2914,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2935,7 +2940,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3.1

1 0

[PATCH 1/2] xfs: always init fdblocks in mount
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Zheng Bin <zhengbin13(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31088 CVE: NA --------------------------- Use fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 0, counted 3224 in ag 0 sb_fdblocks 3228, counted 3224 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, while in linux-next, sync not stuck. The reason is same to commit d0c7feaf8767 ("xfs: add agf freeblocks verify in xfs_agf_verify"), cause agf_longest is 0, we can not block this in xfs_agf_verify. Make sure fdblocks is always inited in mount(also init ifree, icount). xfs_mountfs xfs_check_summary_counts xfs_initialize_perag_data Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_ag_resv.c | 11 +++++++---- fs/xfs/xfs_mount.c | 33 --------------------------------- 2 files changed, 7 insertions(+), 37 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index e2ba2a3..4f099fc 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -309,10 +309,13 @@ } #ifdef DEBUG - /* need to read in the AGF for the ASSERT below to work */ - error = xfs_alloc_pagf_init(pag->pag_mount, tp, pag->pag_agno, 0); - if (error) - return error; + if (!pag->pagf_init) { + /* need to read in the AGF for the ASSERT below to work */ + error = xfs_alloc_pagf_init(pag->pag_mount, tp, + pag->pag_agno, 0); + if (error) + return error; + } ASSERT(xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 02d1509..3af91e2 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -624,39 +624,6 @@ return -EFSCORRUPTED; } - /* - * Now the log is mounted, we know if it was an unclean shutdown or - * not. If it was, with the first phase of recovery has completed, we - * have consistent AG blocks on disk. We have not recovered EFIs yet, - * but they are recovered transactionally in the second recovery phase - * later. - * - * If the log was clean when we mounted, we can check the summary - * counters. If any of them are obviously incorrect, we can recompute - * them from the AGF headers in the next step. - */ - if (XFS_LAST_UNMOUNT_WAS_CLEAN(mp) && - (mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks || - !xfs_verify_icount(mp, mp->m_sb.sb_icount) || - mp->m_sb.sb_ifree > mp->m_sb.sb_icount)) - mp->m_flags |= XFS_MOUNT_BAD_SUMMARY; - - /* - * We can safely re-initialise incore superblock counters from the - * per-ag data. These may not be correct if the filesystem was not - * cleanly unmounted, so we waited for recovery to finish before doing - * this. - * - * If the filesystem was cleanly unmounted or the previous check did - * not flag anything weird, then we can trust the values in the - * superblock to be correct and we don't need to do anything here. - * Otherwise, recalculate the summary counters. - */ - if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || - XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && - !(mp->m_flags & XFS_MOUNT_BAD_SUMMARY)) - return 0; - return xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount); } -- 1.8.3

1 1

[PATCH] xfs: devirtualize ->sf_entsize and ->sf_nextentry
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-5.5-rc1 commit 50f6bb6b7aea8177110e55355c455f18912a7a73 category: bugfix bugzilla: 31596 CVE: NA --------------------------- Just check for file-type enabled directories directly. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Conflicts: fs/xfs/libxfs/xfs_dir2_priv.h fs/xfs/libxfs/xfs_dir2_sf.c fs/xfs/xfs_dir2_readdir.c [zb: since patch 84915e1bdddf, 707e0ddaf67e, e91ec882af21, 04df34ac6494 not merged, adjust code] Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_da_format.c | 48 --------------------- fs/xfs/libxfs/xfs_dir2.h | 4 -- fs/xfs/libxfs/xfs_dir2_block.c | 2 +- fs/xfs/libxfs/xfs_dir2_priv.h | 2 + fs/xfs/libxfs/xfs_dir2_sf.c | 96 +++++++++++++++++++++++++----------------- fs/xfs/xfs_dir2_readdir.c | 7 +-- 6 files changed, 64 insertions(+), 95 deletions(-) diff --git a/fs/xfs/libxfs/xfs_da_format.c b/fs/xfs/libxfs/xfs_da_format.c index b39053d..39c2610 100644 --- a/fs/xfs/libxfs/xfs_da_format.c +++ b/fs/xfs/libxfs/xfs_da_format.c @@ -18,48 +18,6 @@ #include "xfs_dir2_priv.h" /* - * Shortform directory ops - */ -static int -xfs_dir2_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - int count = sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ - - count += len; /* name */ - count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ - return count; -} - -static int -xfs_dir3_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - return xfs_dir2_sf_entsize(hdr, len) + sizeof(uint8_t); -} - -static struct xfs_dir2_sf_entry * -xfs_dir2_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir2_sf_entsize(hdr, sfep->namelen)); -} - -static struct xfs_dir2_sf_entry * -xfs_dir3_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir3_sf_entsize(hdr, sfep->namelen)); -} - - -/* * For filetype enabled shortform directories, the file type field is stored at * the end of the name. Because it's only a single byte, endian conversion is * not necessary. For non-filetype enable directories, the type is always @@ -692,8 +650,6 @@ } static const struct xfs_dir_ops xfs_dir2_ops = { - .sf_entsize = xfs_dir2_sf_entsize, - .sf_nextentry = xfs_dir2_sf_nextentry, .sf_get_ftype = xfs_dir2_sfe_get_ftype, .sf_put_ftype = xfs_dir2_sfe_put_ftype, .sf_get_ino = xfs_dir2_sfe_get_ino, @@ -742,8 +698,6 @@ }; static const struct xfs_dir_ops xfs_dir2_ftype_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, @@ -792,8 +746,6 @@ }; static const struct xfs_dir_ops xfs_dir3_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index c3e3f6b..155bae5 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -30,10 +30,6 @@ * directory operations vector for encode/decode routines */ struct xfs_dir_ops { - int (*sf_entsize)(struct xfs_dir2_sf_hdr *hdr, int len); - struct xfs_dir2_sf_entry * - (*sf_nextentry)(struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep); uint8_t (*sf_get_ftype)(struct xfs_dir2_sf_entry *sfep); void (*sf_put_ftype)(struct xfs_dir2_sf_entry *sfep, uint8_t ftype); diff --git a/fs/xfs/libxfs/xfs_dir2_block.c b/fs/xfs/libxfs/xfs_dir2_block.c index 30ed591..fdcf6aa 100644 --- a/fs/xfs/libxfs/xfs_dir2_block.c +++ b/fs/xfs/libxfs/xfs_dir2_block.c @@ -1235,7 +1235,7 @@ static int xfs_dir2_block_lookup_int(xfs_da_args_t *args, struct xfs_buf **bpp, if (++i == sfp->count) sfep = NULL; else - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* Done with the temporary buffer */ kmem_free(sfp); diff --git a/fs/xfs/libxfs/xfs_dir2_priv.h b/fs/xfs/libxfs/xfs_dir2_priv.h index 59f9fb2..655fb33 100644 --- a/fs/xfs/libxfs/xfs_dir2_priv.h +++ b/fs/xfs/libxfs/xfs_dir2_priv.h @@ -108,6 +108,8 @@ extern int xfs_dir2_free_read(struct xfs_trans *tp, struct xfs_inode *dp, xfs_dablk_t fbno, struct xfs_buf **bpp); /* xfs_dir2_sf.c */ +struct xfs_dir2_sf_entry *xfs_dir2_sf_nextentry(struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, struct xfs_dir2_sf_entry *sfep); extern int xfs_dir2_block_sfsize(struct xfs_inode *dp, struct xfs_dir2_data_hdr *block, struct xfs_dir2_sf_hdr *sfhp); extern int xfs_dir2_block_to_sf(struct xfs_da_args *args, struct xfs_buf *bp, diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index 585dfdb..716c8c5 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -40,6 +40,31 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, static void xfs_dir2_sf_toino4(xfs_da_args_t *args); static void xfs_dir2_sf_toino8(xfs_da_args_t *args); +static int +xfs_dir2_sf_entsize( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + int len) +{ + int count = len; + + count += sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ + count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ + + if (xfs_sb_version_hasftype(&mp->m_sb)) + count += sizeof(uint8_t); + return count; +} + +struct xfs_dir2_sf_entry * +xfs_dir2_sf_nextentry( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + struct xfs_dir2_sf_entry *sfep) +{ + return (void *)sfep + xfs_dir2_sf_entsize(mp, hdr, sfep->namelen); +} + /* * Given a block directory (dp/block), calculate its size as a shortform (sf) * directory and a header for the sf directory, if it will fit it the @@ -222,7 +247,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, dp->d_ops->sf_put_ftype(sfep, dp->d_ops->data_get_ftype(dep)); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ptr += dp->d_ops->data_entsize(dep->namelen); } @@ -294,7 +319,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Compute entry (and change in) size. */ - incr_isize = dp->d_ops->sf_entsize(sfp, args->namelen); + incr_isize = xfs_dir2_sf_entsize(dp->i_mount, sfp, args->namelen); objchange = 0; /* @@ -367,18 +392,17 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_data_aoff_t offset, /* offset to use for new ent */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* byte offset in sf dir */ - xfs_inode_t *dp; /* incore directory inode */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; byteoff = (int)((char *)sfep - (char *)sfp); /* * Grow the in-inode space. */ - xfs_idata_realloc(dp, dp->d_ops->sf_entsize(sfp, args->namelen), + xfs_idata_realloc(dp, xfs_dir2_sf_entsize(mp, sfp, args->namelen), XFS_DATA_FORK); /* * Need to set up again due to realloc of the inode data. @@ -419,9 +443,10 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int objchange, /* changing inode number size */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int add_datasize; /* data size need for new ent */ char *buf; /* buffer for old */ - xfs_inode_t *dp; /* incore directory inode */ int eof; /* reached end of old dir */ int nbytes; /* temp for byte copies */ xfs_dir2_data_aoff_t new_offset; /* next offset value */ @@ -435,8 +460,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Copy the old directory to the stack buffer. */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; old_isize = (int)dp->i_d.di_size; buf = kmem_alloc(old_isize, KM_SLEEP); @@ -453,7 +476,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, eof = (char *)oldsfep == &buf[old_isize]; !eof; offset = new_offset + dp->d_ops->data_entsize(oldsfep->namelen), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep), eof = (char *)oldsfep == &buf[old_isize]) { new_offset = xfs_dir2_sf_get_offset(oldsfep); if (offset + add_datasize <= new_offset) @@ -491,7 +514,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * If there's more left to copy, do that. */ if (!eof) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); memcpy(sfep, oldsfep, old_isize - nbytes); } kmem_free(buf); @@ -513,7 +536,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_entry_t **sfepp, /* out(1): new entry ptr */ xfs_dir2_data_aoff_t *offsetp) /* out(1): new offset */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int holefit; /* found hole it will fit in */ int i; /* entry number */ xfs_dir2_data_aoff_t offset; /* data block offset */ @@ -522,8 +546,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int size; /* entry's data size */ int used; /* data bytes used */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; size = dp->d_ops->data_entsize(args->namelen); offset = dp->d_ops->data_first_offset; @@ -539,7 +561,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, holefit = offset + size <= xfs_dir2_sf_get_offset(sfep); offset = xfs_dir2_sf_get_offset(sfep) + dp->d_ops->data_entsize(sfep->namelen); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* * Calculate data bytes used excluding the new entry, if this @@ -598,7 +620,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(dp->i_mount, sfp, sfep)) { ASSERT(xfs_dir2_sf_get_offset(sfep) >= offset); ino = dp->d_ops->sf_get_ino(sfp, sfep); i8count += ino > XFS_DIR2_MAX_SHORT_INUM; @@ -683,7 +705,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * within the data buffer. The next entry starts after the * name component, so nextentry is an acceptable test. */ - next_sfep = dops->sf_nextentry(sfp, sfep); + next_sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); if (endp < (char *)next_sfep) return __this_address; @@ -782,7 +804,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_lookup( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ int error; xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ @@ -793,7 +816,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_lookup(args); xfs_dir2_sf_check(args); - dp = args->dp; ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* @@ -831,7 +853,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ ci_sfep = NULL; for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { /* * Compare name and if it's an exact match, return the inode * number. If it's the first case-insensitive match, store the @@ -867,8 +889,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_removename( xfs_da_args_t *args) { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* offset of removed entry */ - xfs_inode_t *dp; /* incore directory inode */ int entsize; /* this entry's size */ int i; /* shortform entry index */ int newsize; /* new inode size */ @@ -878,8 +901,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_removename(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); oldsize = (int)dp->i_d.di_size; /* @@ -898,7 +919,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Find the one we're deleting. */ for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ASSERT(dp->d_ops->sf_get_ino(sfp, sfep) == @@ -915,7 +936,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Calculate sizes. */ byteoff = (int)((char *)sfep - (char *)sfp); - entsize = dp->d_ops->sf_entsize(sfp, args->namelen); + entsize = xfs_dir2_sf_entsize(mp, sfp, args->namelen); newsize = oldsize - entsize; /* * Copy the part if any after the removed entry, sliding it down. @@ -954,7 +975,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_replace( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ xfs_ino_t ino=0; /* entry old inode number */ int i8elevated; /* sf_toino8 set i8count=1 */ @@ -963,8 +985,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_replace(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* * Bail out if the shortform directory is way too small. @@ -1020,7 +1040,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ else { for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ino = dp->d_ops->sf_get_ino(sfp, sfep); @@ -1079,8 +1099,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino4( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1091,8 +1112,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino4(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1126,8 +1145,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); @@ -1152,8 +1171,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino8( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1164,8 +1184,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino8(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1199,8 +1217,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); diff --git a/fs/xfs/xfs_dir2_readdir.c b/fs/xfs/xfs_dir2_readdir.c index 5142e64..2ae98c2 100644 --- a/fs/xfs/xfs_dir2_readdir.c +++ b/fs/xfs/xfs_dir2_readdir.c @@ -50,6 +50,7 @@ { int i; /* shortform entry number */ struct xfs_inode *dp = args->dp; /* incore directory inode */ + struct xfs_mount *mp = dp->i_mount; xfs_dir2_dataptr_t off; /* current entry's offset */ xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ @@ -111,7 +112,7 @@ xfs_dir2_sf_get_offset(sfep)); if (ctx->pos > off) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); continue; } @@ -119,9 +120,9 @@ filetype = dp->d_ops->sf_get_ftype(sfep); ctx->pos = off & 0x7fffffff; if (!dir_emit(ctx, (char *)sfep->name, sfep->namelen, ino, - xfs_dir3_get_dtype(dp->i_mount, filetype))) + xfs_dir3_get_dtype(mp, filetype))) return 0; - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ctx->pos = xfs_dir2_db_off_to_dataptr(geo, geo->datablk + 1, 0) & -- 1.8.3

1 0

[PATCH 1/2] block: delete part_round_stats and switch to less precise counting
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Mikulas Patocka <mpatocka(a)redhat.com> mainline inclusion from mainline-5.0-rc1 commit 5b18b5a737600fd20ba2045f320d5926ebbf341a category: bugfix bugzilla: 31388 CVE: NA --------------------------- We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflict: block/bio.c block/blk-core.c block/blk-merge.c block/genhd.c include/linux/genhd.h Signed-off-by: Yufen Yu <yuyufen(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/bio.c | 23 ++++++++++++++++++++--- block/blk-core.c | 6 ++++-- block/blk-merge.c | 1 - block/genhd.c | 4 ---- block/partition-generic.c | 4 ---- include/linux/genhd.h | 1 + 6 files changed, 25 insertions(+), 14 deletions(-) diff --git a/block/bio.c b/block/bio.c index 3d7570553..48a8cf5 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1668,13 +1668,28 @@ void bio_check_pages_dirty(struct bio *bio) } EXPORT_SYMBOL_GPL(bio_check_pages_dirty); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now) +{ + unsigned long stamp; +again: + stamp = READ_ONCE(part->stamp); + if (unlikely(stamp != now)) { + if (likely(cmpxchg(&part->stamp, stamp, now) == stamp)) + __part_stat_add(cpu, part, io_ticks, 1); + } + if (part->partno) { + part = &part_to_disk(part)->part0; + goto again; + } +} + void generic_start_io_acct(struct request_queue *q, int op, unsigned long sectors, struct hd_struct *part) { const int sgrp = op_stat_group(op); int cpu = part_stat_lock(); - part_round_stats(q, cpu, part); + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, sectors[sgrp], sectors); part_inc_in_flight(q, part, op_is_write(op)); @@ -1686,12 +1701,14 @@ void generic_start_io_acct(struct request_queue *q, int op, void generic_end_io_acct(struct request_queue *q, int req_op, struct hd_struct *part, unsigned long start_time) { - unsigned long duration = jiffies - start_time; + unsigned long now = jiffies; + unsigned long duration = now - start_time; const int sgrp = op_stat_group(req_op); int cpu = part_stat_lock(); + update_io_ticks(cpu, part, now); part_stat_add(cpu, part, nsecs[sgrp], jiffies_to_nsecs(duration)); - part_round_stats(q, cpu, part); + part_stat_add(cpu, part, time_in_queue, duration); part_dec_in_flight(q, part, op_is_write(req_op)); part_stat_unlock(); diff --git a/block/blk-core.c b/block/blk-core.c index b64dec2..d9e3ee6 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2740,9 +2740,10 @@ void blk_account_io_done(struct request *req, u64 now) cpu = part_stat_lock(); part = req->part; + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, nsecs[sgrp], now - req->start_time_ns); - part_round_stats(req->q, cpu, part); + part_stat_add(cpu, part, time_in_queue, nsecs_to_jiffies64(now - req->start_time_ns)); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); @@ -2790,11 +2791,12 @@ void blk_account_io_start(struct request *rq, bool new_io) part_stat_inc(cpu, part, merges[rw]); } else { part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq)); - part_round_stats(rq->q, cpu, part); part_inc_in_flight(rq->q, part, rw); rq->part = part; } + update_io_ticks(cpu, part, jiffies); + part_stat_unlock(); } diff --git a/block/blk-merge.c b/block/blk-merge.c index 7efa8c3..044bff9 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -656,7 +656,6 @@ static void blk_account_io_merge(struct request *req) cpu = part_stat_lock(); part = req->part; - part_round_stats(req->q, cpu, part); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); diff --git a/block/genhd.c b/block/genhd.c index ff9d46d..862a2f3 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1342,7 +1342,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) struct hd_struct *hd; char buf[BDEVNAME_SIZE]; unsigned int inflight[2]; - int cpu; /* if (&disk_to_dev(gp)->kobj.entry == block_class.devices.next) @@ -1354,9 +1353,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { - cpu = part_stat_lock(); - part_round_stats(gp->queue, cpu, hd); - part_stat_unlock(); part_in_flight(gp->queue, hd, inflight); seq_printf(seqf, "%4d %7d %s " "%lu %lu %lu %u " diff --git a/block/partition-generic.c b/block/partition-generic.c index 8ad6dca..d86d794 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -121,11 +121,7 @@ ssize_t part_stat_show(struct device *dev, struct hd_struct *p = dev_to_part(dev); struct request_queue *q = part_to_disk(p)->queue; unsigned int inflight[2]; - int cpu; - cpu = part_stat_lock(); - part_round_stats(q, cpu, p); - part_stat_unlock(); part_in_flight(q, p, inflight); return sprintf(buf, "%8lu %8lu %8llu %8u " diff --git a/include/linux/genhd.h b/include/linux/genhd.h index df0d01d..666b23a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -422,6 +422,7 @@ static inline void free_part_info(struct hd_struct *part) /* block/blk-core.c */ extern void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now); /* block/genhd.c */ extern void device_add_disk(struct device *parent, struct gendisk *disk); -- 1.8.3

1 1

[PATCH] CIFS: Fix bug which the return value by asynchronous read is error
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Yilu Lin <linyilu(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31384 CVE: NA ------------------------------------------------- This patch is used to fix the bug in collect_uncached_read_data() that rc is automatically converted from a signed number to an unsigned number when the CIFS asynchronous read fails. It will cause ctx->rc is error. Example: Share a directory and create a file on the Windows OS. Mount the directory to the Linux OS using CIFS. On the CIFS client of the Linux OS, invoke the pread interface to deliver the read request. The size of the read length plus offset of the read request is greater than the maximum file size. In this case, the CIFS server on the Windows OS returns a failure message (for example, the return value of smb2.nt_status is STATUS_INVALID_PARAMETER). After receiving the response message, the CIFS client parses smb2.nt_status to STATUS_INVALID_PARAMETER and converts it to the Linux error code (rdata->result=-22). Then the CIFS client invokes the collect_uncached_read_data function to assign the value of rdata->result to rc, that is, rc=rdata->result=-22. The type of the ctx->total_len variable is unsigned integer, the type of the rc variable is integer, and the type of the ctx->rc variable is ssize_t. Therefore, during the ternary operation, the value of rc is automatically converted to an unsigned number. The final result is ctx->rc=4294967274. However, the expected result is ctx->rc=-22. https://patchwork.kernel.org/patch/11444477/ Signed-off-by: Yilu Lin <linyilu(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e92513e..23b1098 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3347,7 +3347,7 @@ ssize_t cifs_user_writev(struct kiocb *iocb, struct iov_iter *from) if (rc == -ENODATA) rc = 0; - ctx->rc = (rc == 0) ? ctx->total_len : rc; + ctx->rc = (rc == 0) ? (ssize_t)ctx->total_len : rc; mutex_unlock(&ctx->aio_mutex); -- 1.8.3

1 0

[PATCH 1/2] net/hinic: slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets.
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets. When vm is rebooting, VF receives lots of broadcast packects and VF may be disconnected. VF receives broadcast packect and VF driver will clear INTR_ON flag in setting msix process. Then VF driver will not enable interrupt if INTR_ON flag is set. As a result, VF will not process any hadware interrpt. In order to solve this problem, VF driver should be enable the interrpt first and then set msix state. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 9b53a6f..b6da9fe 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -759,6 +759,8 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) goto req_tx_irq_err; } + set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); @@ -768,7 +770,6 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) hinic_set_msix_state(nic_dev->hwdev, irq_cfg->msix_entry_idx, HINIC_MSIX_ENABLE); - set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); } INIT_DELAYED_WORK(&nic_dev->moderation_task, -- 1.8.3

1 1

[PATCH] openeuler/config: disable CONFIG_EFI_VARS
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31390 CVE: NA Accessing sysfs-efivars interface '/sys/firmware/efi/vars' may have some problem. We can access the new efivarfs interface '/sys/firmware/efi/efivars' instead. So disable CONFIG_EFI_VARS and keep CONFIG_EFIVAR_FS enabled. Link: https://gitee.com/openeuler/kernel/issues/I1BN57 Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index a024ce2..9e6f560 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -580,10 +580,8 @@ CONFIG_HAVE_ARM_SMCCC=y # # EFI (Extensible Firmware Interface) Support # -CONFIG_EFI_VARS=y +#CONFIG_EFI_VARS is not set CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=y -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y CONFIG_EFI_PARAMS_FROM_FDT=y CONFIG_EFI_RUNTIME_WRAPPERS=y CONFIG_EFI_ARMSTUB=y -- 1.8.3

1 0

[PATCH] pagecache: support percpu refcount to imporve performance
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: pagecache percpu refcount bugzilla: 31398 CVE: NA ------------------------------------------------- The pagecache manages the file physical pages, and the life cycle of page is managed by atomic counting. With the increasing number of cpu cores, the cost of atomic counting is very large when reading file pagecaches at large concurrent. For example, when running nginx http application, the biggest hotspot is found in the atomic operation of find_get_entry(): 11.94% [kernel] [k] find_get_entry 7.45% [kernel] [k] do_tcp_sendpages 6.12% [kernel] [k] generic_file_buffered_read So we using the percpu refcount mechanism to fix this problem. and the test result show that the read performance of nginx http can be improved by 100%： worker original(requests/sec) percpu(requests/sec) imporve 64 759656.87 1627088.95 114.2% Notes: we use page->lru to save percpu information, so the pages with percpu attribute will not be recycled by memory recycling process, we should avoid grow the file size unlimited. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/fcntl.c | 20 ++++++++++++ include/linux/mm.h | 23 +++++++++++++ include/linux/page-flags.h | 2 ++ include/linux/page_ref.h | 11 +++++++ include/linux/pagemap.h | 24 ++++++++++++++ include/trace/events/mmflags.h | 3 +- include/uapi/linux/fcntl.h | 2 ++ mm/filemap.c | 74 ++++++++++++++++++++++++++++++++++++++++-- mm/swap.c | 2 ++ 9 files changed, 158 insertions(+), 3 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 4137d96..0c70a8e 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -29,6 +29,7 @@ #include <linux/poll.h> #include <asm/siginfo.h> #include <linux/uaccess.h> +#include <linux/pagemap.h> #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) @@ -319,6 +320,22 @@ static long fcntl_rw_hint(struct file *file, unsigned int cmd, } } +static long fcntl_mapping_percpu(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct address_space *mapping = filp->f_mapping; + unsigned long flag = arg; + + if (!mapping) + return -EINVAL; + + if (flag) + mapping_set_percpu_ref(mapping); + else + mapping_clear_percpu_ref(mapping); + return 0; +} + static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, struct file *filp) { @@ -426,6 +443,9 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_SET_FILE_RW_HINT: err = fcntl_rw_hint(filp, cmd, arg); break; + case F_MAPPING_PERCPU: + err = fcntl_mapping_percpu(filp, cmd, arg); + break; default: break; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 65d91b1..0e173a4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -528,6 +528,10 @@ static inline int pgd_devmap(pgd_t pgd) static inline int put_page_testzero(struct page *page) { VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return 0; + } return page_ref_dec_and_test(page); } @@ -539,6 +543,10 @@ static inline int put_page_testzero(struct page *page) */ static inline int get_page_unless_zero(struct page *page) { + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } return page_ref_add_unless(page, 1, 0); } @@ -928,6 +936,11 @@ static inline bool is_device_public_page(const struct page *page) static inline void get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return; + } /* * Getting a normal page or the head of a compound page * requires to already have an elevated page->_refcount. @@ -939,6 +952,11 @@ static inline void get_page(struct page *page) static inline __must_check bool try_get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } if (WARN_ON_ONCE(page_ref_count(page) <= 0)) return false; page_ref_inc(page); @@ -949,6 +967,11 @@ static inline void put_page(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return; + } + /* * For devmap managed pages we need to catch refcount transition from * 2 to 1, when refcount reach one it means the page is free and we diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 3f066ce..7eb776a 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -101,6 +101,7 @@ enum pageflags { PG_young, PG_idle, #endif + PG_percpu_ref, __NR_PAGEFLAGS, /* Filesystems */ @@ -385,6 +386,7 @@ static inline bool set_hwpoison_free_buddy_page(struct page *page) TESTCLEARFLAG(Young, young, PF_ANY) PAGEFLAG(Idle, idle, PF_ANY) #endif +PAGEFLAG(PercpuRef, percpu_ref, PF_ANY) /* * On an anonymous page mapped into a user virtual memory area, diff --git a/include/linux/page_ref.h b/include/linux/page_ref.h index 14d14be..3deab40 100644 --- a/include/linux/page_ref.h +++ b/include/linux/page_ref.h @@ -180,4 +180,15 @@ static inline void page_ref_unfreeze(struct page *page, int count) __page_ref_unfreeze(page, count); } +static inline struct percpu_ref *page_percpu_ref(struct page *page) +{ + return *(struct percpu_ref **)&page->lru; +} + +static inline void page_set_percpu_ref(struct page *page, + struct percpu_ref *ref) +{ + *(struct percpu_ref **)&page->lru = ref; +} + #endif diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 520627f..e889d99 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -29,6 +29,7 @@ enum mapping_flags { AS_EXITING = 4, /* final truncate in progress */ /* writeback related tags are not used */ AS_NO_WRITEBACK_TAGS = 5, + AS_PERCPU_REF = 6, /* percpu ref counter for special inode */ }; /** @@ -97,6 +98,21 @@ static inline int mapping_use_writeback_tags(struct address_space *mapping) return !test_bit(AS_NO_WRITEBACK_TAGS, &mapping->flags); } +static inline void mapping_set_percpu_ref(struct address_space *mapping) +{ + set_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline void mapping_clear_percpu_ref(struct address_space *mapping) +{ + clear_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline int mapping_percpu_ref(struct address_space *mapping) +{ + return test_bit(AS_PERCPU_REF, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return mapping->gfp_mask; @@ -170,6 +186,10 @@ static inline int page_cache_get_speculative(struct page *page) # ifdef CONFIG_PREEMPT_COUNT VM_BUG_ON(!in_atomic() && !irqs_disabled()); # endif + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } /* * Preempt must be disabled here - we rely on rcu_read_lock doing * this for us. @@ -183,6 +203,10 @@ static inline int page_cache_get_speculative(struct page *page) page_ref_inc(page); #else + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } if (unlikely(!get_page_unless_zero(page))) { /* * Either the page has been freed, or will be freed. diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h index a81cffb..2994f1c 100644 --- a/include/trace/events/mmflags.h +++ b/include/trace/events/mmflags.h @@ -104,7 +104,8 @@ IF_HAVE_PG_UNCACHED(PG_uncached, "uncached" ) \ IF_HAVE_PG_HWPOISON(PG_hwpoison, "hwpoison" ) \ IF_HAVE_PG_IDLE(PG_young, "young" ) \ -IF_HAVE_PG_IDLE(PG_idle, "idle" ) +IF_HAVE_PG_IDLE(PG_idle, "idle"), \ + {1UL << PG_percpu_ref, "percpu_ref" } #define show_page_flags(flags) \ (flags) ? __print_flags(flags, "|", \ diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 6448cdd..6dcddf7 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -53,6 +53,8 @@ #define F_GET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 13) #define F_SET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 14) +#define F_MAPPING_PERCPU (F_LINUX_SPECIFIC_BASE + 15) + /* * Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be * used to clear any hints previously set. diff --git a/mm/filemap.c b/mm/filemap.c index c56c419..8a8bf78 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -48,6 +48,66 @@ #include <asm/mman.h> +struct percpu_page { + struct percpu_ref ref; + struct page *page; +}; + +static void free_page_ref(struct percpu_ref *ref) +{ + struct percpu_page *p = (struct percpu_page *)ref; + struct page *page = p->page; + + percpu_ref_exit(ref); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); + + ClearPagePercpuRef(page); + /* really free the page */ + put_page(page); +} + +static void page_cache_init(struct address_space *mapping, struct page *page) +{ + struct percpu_page *p; + + if (!mapping_percpu_ref(mapping)) + return; + + p = kzalloc(sizeof(struct percpu_page), GFP_KERNEL); + if (!p) + return; + if (percpu_ref_init(&p->ref, free_page_ref, 0, GFP_KERNEL)) + goto err; + + p->page = page; + page_set_percpu_ref(page, &p->ref); + SetPagePercpuRef(page); + get_page(page); + return; +err: + kfree(p); +} + +static void page_cache_exit(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + + put_page(page); + ClearPagePercpuRef(page); + percpu_ref_exit(page_percpu_ref(page)); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); +} + +static void page_cache_kill(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + percpu_ref_kill(page_percpu_ref(page)); +} + /* * Shared mappings implemented 30.11.1994. It's not fully working yet, * though. @@ -264,6 +324,7 @@ void __delete_from_page_cache(struct page *page, void *shadow) unaccount_page_cache_page(mapping, page); page_cache_tree_delete(mapping, page, shadow); + page_cache_kill(page); } static void page_cache_free_page(struct address_space *mapping, @@ -384,8 +445,10 @@ void delete_from_page_cache_batch(struct address_space *mapping, page_cache_tree_delete_batch(mapping, pvec); xa_unlock_irqrestore(&mapping->i_pages, flags); - for (i = 0; i < pagevec_count(pvec); i++) + for (i = 0; i < pagevec_count(pvec); i++) { + page_cache_kill(pvec->pages[i]); page_cache_free_page(mapping, pvec->pages[i]); + } } int filemap_check_errors(struct address_space *mapping) @@ -966,7 +1029,8 @@ int add_to_page_cache_lru(struct page *page, struct address_space *mapping, workingset_activation(page); } else ClearPageActive(page); - lru_cache_add(page); + if (!PagePercpuRef(page)) + lru_cache_add(page); } return ret; } @@ -1630,8 +1694,10 @@ struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset, if (fgp_flags & FGP_ACCESSED) __SetPageReferenced(page); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, offset, gfp_mask); if (unlikely(err)) { + page_cache_exit(page); put_page(page); page = NULL; if (err == -EEXIST) @@ -2320,9 +2386,11 @@ static ssize_t generic_file_buffered_read(struct kiocb *iocb, error = -ENOMEM; goto out; } + page_cache_init(mapping, page); error = add_to_page_cache_lru(page, mapping, index, mapping_gfp_constraint(mapping, GFP_KERNEL)); if (error) { + page_cache_exit(page); put_page(page); if (error == -EEXIST) { error = 0; @@ -2837,8 +2905,10 @@ static struct page *do_read_cache_page(struct address_space *mapping, page = __page_cache_alloc(gfp); if (!page) return ERR_PTR(-ENOMEM); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, index, gfp); if (unlikely(err)) { + page_cache_exit(page); put_page(page); if (err == -EEXIST) goto repeat; diff --git a/mm/swap.c b/mm/swap.c index 45fdbfb..320ac35 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -372,6 +372,8 @@ static void __lru_cache_activate_page(struct page *page) void mark_page_accessed(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) + return; if (!PageActive(page) && !PageUnevictable(page) && PageReferenced(page)) { -- 1.8.3

1 0

[PATCH] arm64: mm: support setting page attributes for debugging
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: Memory debug feature ------------------------------------------------- When pagealloc debug is enabled, block mappings or contiguous hints are no longer used for linear address area. Therefore, support setting page attributes in this case is useful for debugging memory corruption problems. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/mm/pageattr.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index a5635937..3e398d0 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -87,8 +87,16 @@ static int change_memory_common(unsigned long addr, int numpages, area = find_vm_area((void *)addr); if (!area || end > (unsigned long)area->addr + area->size || - !(area->flags & VM_ALLOC)) + !(area->flags & VM_ALLOC)) { + /* + * When pagealloc debug is enabled, the linear address is + * mapped with NO_BLOCK_MAPPINGS and NO_CONT_MAPPINGS flags. + */ + if (numpages && debug_pagealloc_enabled()) + return __change_memory_common(start, size, + set_mask, clear_mask); return -EINVAL; + } if (!numpages) return 0; -- 1.8.3

1 0

[PATCH] staging: android: ashmem: Disallow ashmem memory from being remapped
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Suren Baghdasaryan <surenb(a)google.com> commit 6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by: Jann Horn <jannh(a)google.com> Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Cc: stable <stable(a)vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4 Signed-off-by: Todd Kjos <tkjos(a)google.com> Reviewed-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/staging/android/ashmem.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c index be81533..e3df4bf 100644 --- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -350,8 +350,23 @@ static inline vm_flags_t calc_vm_may_flags(unsigned long prot) _calc_vm_trans(prot, PROT_EXEC, VM_MAYEXEC); } +static int ashmem_vmfile_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* do not allow to mmap ashmem backing shmem file directly */ + return -EPERM; +} + +static unsigned long +ashmem_vmfile_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + return current->mm->get_unmapped_area(file, addr, len, pgoff, flags); +} + static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) { + static struct file_operations vmfile_fops; struct ashmem_area *asma = file->private_data; int ret = 0; @@ -392,6 +407,19 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) } vmfile->f_mode |= FMODE_LSEEK; asma->file = vmfile; + /* + * override mmap operation of the vmfile so that it can't be + * remapped which would lead to creation of a new vma with no + * asma permission checks. Have to override get_unmapped_area + * as well to prevent VM_BUG_ON check for f_ops modification. + */ + if (!vmfile_fops.mmap) { + vmfile_fops = *vmfile->f_op; + vmfile_fops.mmap = ashmem_vmfile_mmap; + vmfile_fops.get_unmapped_area = + ashmem_vmfile_get_unmapped_area; + } + vmfile->f_op = &vmfile_fops; } get_file(asma->file); -- 1.8.3

1 0

[PATCH 0/2] more fixes about CVE-2020-8648
by Yang Yingliang 16 Mar '20

16 Mar '20

Jiri Slaby (2): vt: selection, push console lock down vt: selection, push sel_lock up drivers/tty/vt/selection.c | 27 ++++++++++++++++++--------- drivers/tty/vt/vt.c | 2 -- 2 files changed, 18 insertions(+), 11 deletions(-) -- 1.8.3

1 2

[PATCH] mm/resource: Return real error codes from walk failures
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Dave Hansen <dave.hansen(a)linux.intel.com> mainline inclusion from mainline-v5.1-rc1 commit 5cd401ace914dc68556c6d2fcae0c349444d5f86 category: bugfix bugzilla: 17339 CVE: NA ------------------------------------------------- walk_system_ram_range() can return an error code either becuase *it* failed, or because the 'func' that it calls returned an error. The memory hotplug does the following: ret = walk_system_ram_range(..., func); if (ret) return ret; and 'ret' makes it out to userspace, eventually. The problem s, walk_system_ram_range() failues that result from *it* failing (as opposed to 'func') return -1. That leads to a very odd -EPERM (-1) return code out to userspace. Make walk_system_ram_range() return -EINVAL for internal failures to keep userspace less confused. This return code is compatible with all the callers that I audited. Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Michael Ellerman <mpe(a)ellerman.id.au> (powerpc) Cc: Dan Williams <dan.j.williams(a)intel.com> Cc: Dave Jiang <dave.jiang(a)intel.com> Cc: Ross Zwisler <zwisler(a)kernel.org> Cc: Vishal Verma <vishal.l.verma(a)intel.com> Cc: Tom Lendacky <thomas.lendacky(a)amd.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.com> Cc: linux-nvdimm(a)lists.01.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: Huang Ying <ying.huang(a)intel.com> Cc: Fengguang Wu <fengguang.wu(a)intel.com> Cc: Borislav Petkov <bp(a)suse.de> Cc: Yaowei Bai <baiyaowei(a)cmss.chinamobile.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jerome Glisse <jglisse(a)redhat.com> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Paul Mackerras <paulus(a)samba.org> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: Keith Busch <keith.busch(a)intel.com> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> --- kernel/resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index bce773c..7dd11c7 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -377,7 +377,7 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, int (*func)(struct resource *, void *)) { struct resource res; - int ret = -1; + int ret = -EINVAL; while (start < end && !find_next_iomem_res(start, end, flags, desc, @@ -456,7 +456,7 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, unsigned long flags; struct resource res; unsigned long pfn, end_pfn; - int ret = -1; + int ret = -EINVAL; start = (u64) start_pfn << PAGE_SHIFT; end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1; -- 1.8.3

1 0

[PATCH 0/2] fixes CVE-2020-1749
by Yang Yingliang 16 Mar '20

16 Mar '20

1 2

[PATCH] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- arch/x86/configs/openeuler_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index f5579a2..4dd4540 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -2181,7 +2181,7 @@ CONFIG_VMWARE_PVSCSI=m CONFIG_HYPERV_STORAGE=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m CONFIG_FCOE_FNIC=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set -- 2.7.4

1 0

[PATCH hulk-4.19-next] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set -- 2.7.4

1 0

[PATCH] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH 0/4] update hns3 driver
by Yang Yingliang 14 Mar '20

14 Mar '20

shenhao (4): net: hns3: adds support for extended VLAN mode and 'QOS' in vlan 802.1Q protocol. net: hns3: Increase vlan tag0 when close the port_base_vlan net: hns3: add dumping vlan filter config in debugfs net: hns3: update the number of version drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 3 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 57 ++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 288 ++++++++++++++++----- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 11 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 9 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 13 files changed, 311 insertions(+), 80 deletions(-) -- 1.8.3

1 4

[PATCH hulk-4.19-next] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH] net/hinic: driver code compliance rectification
by Yang Yingliang 12 Mar '20

12 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- hinic driver code compliance rectification. 1.Process return value of snprintf and sscanf function. 2.Modify devil number. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../net/ethernet/huawei/hinic/hinic_dbgtool_knl.c | 4 +- drivers/net/ethernet/huawei/hinic/hinic_eqs.c | 24 +++++++--- drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 56 +++++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_hwdev.c | 53 ++++++++++++++------ drivers/net/ethernet/huawei/hinic/hinic_lld.c | 48 ++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_main.c | 11 ++++- drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c | 8 +++- drivers/net/ethernet/huawei/hinic/hinic_nictool.c | 12 +++-- 8 files changed, 165 insertions(+), 51 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c index 1c9c469..535f41a 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c @@ -768,7 +768,7 @@ int dbgtool_knl_init(void *vhwdev, void *chip_node) sema_init(&dbgtool_info->dbgtool_sem, 1); ret = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (ret < 0) { + if (ret <= 0) { pr_err("Failed to get hinic id\n"); goto sscanf_chdev_fail; } @@ -874,7 +874,7 @@ void dbgtool_knl_deinit(void *vhwdev, void *chip_node) return; err = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); g_card_node_array[id] = NULL; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c index 4b2b0c0..3fee9fb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c @@ -1133,15 +1133,27 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwdev *hwdev, u16 q_id, } if (type == HINIC_AEQ) { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_aeq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_aeq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, aeq_interrupt, 0UL, eq->irq_name, eq); } else { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_ceq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_ceq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, ceq_interrupt, 0UL, eq->irq_name, eq); } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c index 37d8d38..ac711da 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c @@ -294,12 +294,15 @@ u32 hinic_get_io_stats_size(struct hinic_nic_dev *nic_dev) } #define QUEUE_STATS_PACK(items, item_idx, array, stats_ptr, qid) { \ - int j; \ + int j, err; \ for (j = 0; j < ARRAY_LEN(array); j++) { \ memcpy((items)[item_idx].name, (array)[j].name, \ HINIC_SHOW_ITEM_LEN); \ - snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN, \ + err = snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN,\ (array)[j].name, (qid)); \ + if (err <= 0 || err >= HINIC_SHOW_ITEM_LEN) \ + pr_err("Failed snprintf: func_ret(%d), dest_len(%d)\n",\ + err, HINIC_SHOW_ITEM_LEN); \ (items)[item_idx].hexadecimal = 0; \ (items)[item_idx].value = \ GET_VALUE_OF_PTR((array)[j].size, \ @@ -335,6 +338,8 @@ void hinic_get_io_stats(struct hinic_nic_dev *nic_dev, #define LP_DEFAULT_TIME (5) /* seconds */ #define LP_PKT_LEN (1514) +#define OBJ_STR_MAX_LEN (32) +#define SET_LINK_STR_MAX_LEN (128) #define PORT_DOWN_ERR_IDX 0 enum diag_test_index { @@ -743,16 +748,28 @@ static int hinic_set_settings_to_hw(struct hinic_nic_dev *nic_dev, struct net_device *netdev = nic_dev->netdev; struct hinic_link_ksettings settings = {0}; enum nic_speed_level speed_level = 0; - char set_link_str[128] = {0}; + char set_link_str[SET_LINK_STR_MAX_LEN] = {0}; int err = 0; - snprintf(set_link_str, sizeof(set_link_str), "%s", - (set_settings & HILINK_LINK_SET_AUTONEG) ? - (autoneg ? "autong enable " : "autong disable ") : ""); + err = snprintf(set_link_str, sizeof(set_link_str), "%s", + (set_settings & HILINK_LINK_SET_AUTONEG) ? + (autoneg ? "autong enable " : "autong disable ") : ""); + if (err < 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link state, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } if (set_settings & HILINK_LINK_SET_SPEED) { speed_level = hinic_ethtool_to_hw_speed_level(speed); - snprintf(set_link_str, sizeof(set_link_str), - "%sspeed %d ", set_link_str, speed); + err = snprintf(set_link_str, sizeof(set_link_str), + "%sspeed %d ", set_link_str, speed); + if (err <= 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link speed, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } } settings.valid_bitmap = set_settings; @@ -883,7 +900,12 @@ static void hinic_get_drvinfo(struct net_device *netdev, return; } - snprintf(info->fw_version, sizeof(info->fw_version), "%s", mgmt_ver); + err = snprintf(info->fw_version, sizeof(info->fw_version), + "%s", mgmt_ver); + if (err <= 0 || err >= (int)sizeof(info->fw_version)) + nicif_err(nic_dev, drv, netdev, + "Failed snprintf fw_version, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(info->fw_version)); } static u32 hinic_get_msglevel(struct net_device *netdev) @@ -1429,10 +1451,22 @@ static int __hinic_set_coalesce(struct net_device *netdev, if (queue == COALESCE_ALL_QUEUE) { ori_intr_coal = &nic_dev->intr_coalesce[0]; - snprintf(obj_str, sizeof(obj_str), "for netdev"); + err = snprintf(obj_str, sizeof(obj_str), "for netdev"); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } else { ori_intr_coal = &nic_dev->intr_coalesce[queue]; - snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + err = snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } CHECK_COALESCE_CHANGED(coal, rx_coalesce_usecs, COALESCE_TIMER_CFG_UNIT, ori_intr_coal->coalesce_timer_cfg, obj_str); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c index a31bb6c..c2454f6 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c @@ -519,6 +519,9 @@ static inline void __set_heartbeat_ehd_detect_delay(struct hinic_hwdev *hwdev, #define HINIC_QUEUE_MAX_DEPTH 12 #define HINIC_MAX_RX_BUFFER_SIZE 15 +#define CAP_INFO_MAC_LEN 512 +#define VENDOR_MAX_LEN 17 + static bool check_root_ctxt(struct hinic_hwdev *hwdev, u16 func_idx, void *buf_in, u16 in_size) { @@ -3891,6 +3894,7 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, char tmp_vendor[17] = {0}; char *port_type = "Unknown port type"; int i; + int err = 0; if (info->cable_absent) { sdk_info(hwdev->dev_hdl, "Cable unpresent\n"); @@ -3918,24 +3922,45 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, memcpy(tmp_vendor, info->vendor_name, sizeof(info->vendor_name)); - snprintf(tmp_str, sizeof(tmp_str) - 1, - "Vendor: %s, %s, length: %um, max_speed: %uGbps", - tmp_vendor, port_type, info->cable_length, - info->cable_max_speed); + err = snprintf(tmp_str, sizeof(tmp_str), + "Vendor: %s, %s, length: %um, max_speed: %uGbps", + tmp_vendor, port_type, info->cable_length, + info->cable_max_speed); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable vendor info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->port_type == LINK_PORT_FIBRE || info->port_type == LINK_PORT_AOC) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, %s, Temperature: %u", tmp_str, - info->sfp_type ? "SFP" : "QSFP", info->cable_temp); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, %s, Temperature: %u", tmp_str, + info->sfp_type ? "SFP" : "QSFP", + info->cable_temp); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable Temp, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->sfp_type) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuW, tx power: %uuW", - tmp_str, info->power[0], info->power[1]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuW, tx power: %uuW", + tmp_str, info->power[0], info->power[1]); } else { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuw %uuW %uuW %uuW", - tmp_str, info->power[0], info->power[1], - info->power[2], info->power[3]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuw %uuW %uuW %uuW", + tmp_str, info->power[0], info->power[1], + info->power[2], info->power[3]); + } + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf power info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; } } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_lld.c b/drivers/net/ethernet/huawei/hinic/hinic_lld.c index 357e050..8a2f280 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_lld.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_lld.c @@ -629,6 +629,7 @@ static void hinic_ignore_minor_version(char *version) { char ver_split[MAX_VER_SPLIT_NUM][MAX_VER_FIELD_LEN] = { {0} }; int max_ver_len, split_num = 0; + int err; __version_split(version, &split_num, ver_split); if (split_num != MAX_VER_SPLIT_NUM) @@ -637,8 +638,11 @@ static void hinic_ignore_minor_version(char *version) max_ver_len = (int)strlen(version) + 1; memset(version, 0, max_ver_len); - snprintf(version, max_ver_len, "%s.%s.%s.0", - ver_split[0], ver_split[1], ver_split[2]); + err = snprintf(version, max_ver_len, "%s.%s.%s.0", + ver_split[0], ver_split[1], ver_split[2]); + if (err <= 0 || err >= max_ver_len) + pr_err("Failed snprintf version, function return(%d) and dest_len(%d)\n", + err, max_ver_len); } static int hinic_detect_version_compatible(struct hinic_pcidev *pcidev) @@ -1152,7 +1156,7 @@ void hinic_get_all_chip_id(void *id_info) lld_dev_hold(); list_for_each_entry(chip_node, &g_hinic_chip_list, node) { err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); card_id->id[i] = id; @@ -1895,6 +1899,7 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) struct card_node *chip_node; unsigned char i; unsigned char parent_bus_number = 0; + int err; if (!pci_is_root_bus(pci_adapter->pcidev->bus)) parent_bus_number = pci_adapter->pcidev->bus->parent->number; @@ -1931,27 +1936,39 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) chip_node = kzalloc(sizeof(*chip_node), GFP_KERNEL); if (!chip_node) { - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc chip node\n"); - return -ENOMEM; + goto alloc_chip_err; } chip_node->dbgtool_attr_file.name = kzalloc(IFNAMSIZ, GFP_KERNEL); if (!(chip_node->dbgtool_attr_file.name)) { - kfree(chip_node); - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc dbgtool attr file name\n"); - return -ENOMEM; + goto alloc_dbgtool_attr_file_err; } /* parent bus number */ chip_node->dp_bus_num = parent_bus_number; - snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); - snprintf((char *)chip_node->dbgtool_attr_file.name, - IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + err = snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", + HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf chip_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + + err = snprintf((char *)chip_node->dbgtool_attr_file.name, + IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf dbgtool_attr_file_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + sdk_info(&pci_adapter->pcidev->dev, "Add new chip %s to global list succeed\n", chip_node->chip_name); @@ -1962,6 +1979,13 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) pci_adapter->chip_node = chip_node; return 0; + +alloc_dbgtool_attr_file_err: + kfree(chip_node); + +alloc_chip_err: + card_bit_map = CLEAR_BIT(card_bit_map, i); + return -ENOMEM; } static void free_chip_node(struct hinic_pcidev *pci_adapter) @@ -1976,7 +2000,7 @@ static void free_chip_node(struct hinic_pcidev *pci_adapter) "Delete chip %s from global list succeed\n", chip_node->chip_name); err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%u", &id); - if (err < 0) + if (err <= 0) sdk_err(&pci_adapter->pcidev->dev, "Failed to get hinic id\n"); card_bit_map = CLEAR_BIT(card_bit_map, id); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 5960603..9b53a6f 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -750,8 +750,15 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) cpumask_set_cpu(local_cpu, &irq_cfg->affinity_mask); } - snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), - "%s_qp%d", nic_dev->netdev->name, q_id); + err = snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), + "%s_qp%d", nic_dev->netdev->name, q_id); + if (err <= 0 || err >= (int)sizeof(irq_cfg->irq_name)) { + nic_err(&pdev->dev, + "Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(irq_cfg->irq_name)); + goto req_tx_irq_err; + } + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c index 8d89d30..cac0cdb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c @@ -2175,7 +2175,13 @@ int hinic_get_mgmt_version(void *hwdev, u8 *mgmt_ver) return -EINVAL; } - snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + err = snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + if (err <= 0 || err >= HINIC_MGMT_VERSION_MAX_LEN) { + nic_err(dev->dev_hdl, + "Failed snprintf fw version, function return(%d) and dest_len(%d)\n", + err, HINIC_MGMT_VERSION_MAX_LEN); + return -EINVAL; + } return 0; } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c index 9a2cb00..46dd9ec 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c @@ -1179,14 +1179,20 @@ static int get_drv_version(void *hwdev, void *buf_in, u32 in_size, { struct drv_version_info *ver_info; char ver_str[MAX_VER_INFO_LEN] = {0}; + int err; if (*out_size != sizeof(*ver_info)) { pr_err("Unexpect out buf size from user :%d, expect: %lu\n", *out_size, sizeof(*ver_info)); return -EFAULT; } - snprintf(ver_str, sizeof(ver_str), "%s [compiled with the kernel]", - HINIC_DRV_VERSION); + err = snprintf(ver_str, sizeof(ver_str), + "%s [compiled with the kernel]", HINIC_DRV_VERSION); + if (err <= 0 || err >= MAX_VER_INFO_LEN) { + pr_err("Failed snprintf driver version, function return(%d) and dest_len(%d)\n", + err, MAX_VER_INFO_LEN); + return -EFAULT; + } ver_info = (struct drv_version_info *)buf_out; memcpy(ver_info->ver, ver_str, sizeof(ver_str)); @@ -1420,7 +1426,7 @@ static int get_card_func_info(char *dev_name, struct msg_module *nt_msg) } err = sscanf(dev_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) { + if (err <= 0) { pr_err("Failed to get hinic id\n"); return err; } -- 1.8.3

1 0

[PATCH 0/3] update hinic and hns3 driver
by Yang Yingliang 12 Mar '20

12 Mar '20

Shaozhengchao (1): net/hinic: Solve the problem that the network card hangs when receiving the skb which frag_size=0 Shengzui You (2): net: hns3: update hns3 version to 1.9.37.1 net: hns3: adds support for reading module eeprom info drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 79 ++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 15 +++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 102 +++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/kcompat.h | 10 ++ drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_tx.c | 65 ++++++++++--- drivers/net/ethernet/huawei/hinic/hinic_tx.h | 2 + 12 files changed, 269 insertions(+), 19 deletions(-) -- 1.8.3

1 3

[PATCH 0/5] fixes some CVE and bug
by Yang Yingliang 12 Mar '20

12 Mar '20

Cengiz Can (1): blktrace: fix dereference after null check Jan Kara (1): blktrace: Protect q->blk_trace with RCU Qu Wenruo (1): btrfs: tree-checker: Remove comprehensive root owner check Zhang Xiaoxu (1): vgacon: Fix a UAF in vgacon_invert_region Zheng Bin (1): xfs: add agf freeblocks verify in xfs_agf_verify drivers/video/console/vgacon.c | 3 ++ fs/btrfs/tree-checker.c | 24 --------- fs/xfs/libxfs/xfs_alloc.c | 16 ++++++ include/linux/blkdev.h | 2 +- include/linux/blktrace_api.h | 18 +++++-- kernel/trace/blktrace.c | 120 ++++++++++++++++++++++++++++++----------- 6 files changed, 122 insertions(+), 61 deletions(-) -- 1.8.3

1 5

[PATCH] vgacon: Fix a UAF in vgacon_invert_region
by Yang Yingliang 11 Mar '20

11 Mar '20

From: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> mainline inclusion from mainline-v5.6-rc4 commit 513dc792d6060d5ef572e43852683097a8420f56 category: bugfix bugzilla: 13690 CVE: CVE-2020-8647, CVE-2020-8649 ------------------------------------------------- When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangx… Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/video/console/vgacon.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index c6b3bdb..bfaa9ec 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1316,6 +1316,9 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) static int vgacon_resize(struct vc_data *c, unsigned int width, unsigned int height, unsigned int user) { + if ((width << 1) * height > vga_vram_size) + return -EINVAL; + if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ c->vc_font.height) -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.8.3

1 0

[PATCH] relay: handle alloc_percpu returning NULL in relay_open
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19462 ------------------------------------------------- alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP [c0000000003f3fec] relay_open+0x29c/0x600 LR [c0000000003f3fc0] relay_open+0x270/0x600 Call Trace: [c000000054353a70] [c0000000003f3fb4] relay_open+0x264/0x600 (unreliable) [c000000054353b00] [c000000000451764] __blk_trace_setup+0x254/0x600 [c000000054353bb0] [c000000000451b78] blk_trace_setup+0x68/0xa0 [c000000054353c10] [c0000000010da77c] sg_ioctl+0x7bc/0x2e80 [c000000054353cd0] [c000000000758cbc] do_vfs_ioctl+0x13c/0x1300 [c000000054353d90] [c000000000759f14] ksys_ioctl+0x94/0x130 [c000000054353de0] [c000000000759ff8] sys_ioctl+0x48/0xb0 [c000000054353e20] [c00000000000bcd0] system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. https://lore.kernel.org/lkml/20191219121256.26480-1-dja%40axtens.net/ Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/relay.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/relay.c b/kernel/relay.c index 9e0f523..078f733 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -581,6 +581,10 @@ struct rchan *relay_open(const char *base_filename, return NULL; chan->buf = alloc_percpu(struct rchan_buf *); + if (!chan->buf) { + kfree(chan); + return NULL; + } chan->version = RELAYFS_CHANNEL_VERSION; chan->n_subbufs = n_subbufs; chan->subbuf_size = subbuf_size; -- 1.8.3

1 0

[PATCH] drm/radeon: check the alloc_workqueue return value
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-16230 ------------------------------------------------- check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/radeon/radeon_display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index d8e2d7b..09522b9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -672,11 +672,16 @@ static void radeon_crtc_init(struct drm_device *dev, int index) if (radeon_crtc == NULL) return; + radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); + if (!radeon_crtc->flip_queue) { + kfree(radeon_crtc); + return; + } + drm_crtc_init(dev, &radeon_crtc->base, &radeon_crtc_funcs); drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256); radeon_crtc->crtc_id = index; - radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); rdev->mode_info.crtcs[index] = radeon_crtc; if (rdev->family >= CHIP_BONAIRE) { -- 1.8.3

1 0

[PATCH] apparmor: Fix use-after-free in aa_audit_rule_init
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Navid Emamdoost <navid.emamdoost(a)gmail.com> hulk inclusion category: bugfix bugzilla: NA CVE: CVE-2019-18814 --------------------------- In the implementation of aa_audit_rule_init(), when aa_label_parse() fails the allocated memory for rule is released using aa_audit_rule_free(). But after this release, the return statement tries to access the label field of the rule which results in use-after-free. Before releasing the rule, copy errNo and return it after release. Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path") Signed-off-by: Navid Emamdoost <navid.emamdoost(a)gmail.com> Reviewed-by: Tyler Hicks <tyhicks(a)canonical.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- security/apparmor/audit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/security/apparmor/audit.c b/security/apparmor/audit.c index eeaddfe..70b9730 100644 --- a/security/apparmor/audit.c +++ b/security/apparmor/audit.c @@ -201,8 +201,9 @@ int aa_audit_rule_init(u32 field, u32 op, char *rulestr, void **vrule) rule->label = aa_label_parse(&root_ns->unconfined->label, rulestr, GFP_KERNEL, true, false); if (IS_ERR(rule->label)) { + int err = PTR_ERR(rule->label); aa_audit_rule_free(rule); - return PTR_ERR(rule->label); + return err; } *vrule = rule; -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Xiongfeng Wang 09 Mar '20

09 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.7.12.4

1 0

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 5

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 0

[PATCH 0/3] fixes CVE-2020-2732
by Yang Yingliang 03 Mar '20

03 Mar '20

Oliver Upton (2): KVM: nVMX: Refactor IO bitmap checks into helper function KVM: nVMX: Check IO instruction VM-exit conditions Paolo Bonzini (1): KVM: nVMX: Don't emulate instructions in guest mode arch/x86/kvm/vmx.c | 99 +++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 79 insertions(+), 20 deletions(-) -- 1.8.3

1 3

[PATCH] floppy: check FDC index for errors before assigning it
by Yang Yingliang 03 Mar '20

03 Mar '20

From: Linus Torvalds <torvalds(a)linux-foundation.org> commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <jordy(a)simplyhacker.com> Cc: Willy Tarreau <w(a)1wt.eu> Cc: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/floppy.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index e71589e..bf222c4 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -852,14 +852,17 @@ static void reset_fdc_info(int mode) /* selects the fdc and drive, and enables the fdc's input/dma. */ static void set_fdc(int drive) { + unsigned int new_fdc = fdc; + if (drive >= 0 && drive < N_DRIVE) { - fdc = FDC(drive); + new_fdc = FDC(drive); current_drive = drive; } - if (fdc != 1 && fdc != 0) { + if (new_fdc >= N_FDC) { pr_info("bad fdc value\n"); return; } + fdc = new_fdc; set_dor(fdc, ~0, 8); #if N_FDC > 1 set_dor(1 - fdc, ~8, 0); -- 1.8.3

1 0

[PATCH] ext4: add cond_resched() to __ext4_find_entry()
by Shijie Luo 29 Feb '20

29 Feb '20

mainline inclusion from mainline-v5.6-rc3 commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e category: bugfix bugzilla: 31127 CVE: NA ------------------------------------------------- We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo <luoshijie1(a)huawei.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> Cc: stable(a)kernel.org --- fs/ext4/namei.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index ceff4b4b1877..b05ea72f38fd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1511,6 +1511,7 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir, /* * We deal with the read-ahead logic here. */ + cond_resched(); if (ra_ptr >= ra_max) { /* Refill the readahead buffer */ ra_ptr = 0; -- 2.19.1

2 1

[PATCH] x86 / config: add openeuler_defconfig
by Yang Yingliang 28 Feb '20

28 Feb '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31089 CVE: NA ----------------------------- Add openeuler_defconfig for openeuler itself. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-By: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 7530 ++++++++++++++++++++++++++++++++++ 1 file changed, 7530 insertions(+) create mode 100644 arch/x86/configs/openeuler_defconfig diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig new file mode 100644 index 00000000..1cf7b97 --- /dev/null +++ b/arch/x86/configs/openeuler_defconfig @@ -0,0 +1,7530 @@ +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=50400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +# CONFIG_KTASK is not set + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y +CONFIG_GENERIC_IRQ_RESERVATION_MODE=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_GENERIC_CMOS_UPDATE=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +# CONFIG_NO_HZ_IDLE is not set +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# CPU/Task time and stats accounting +# +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_CPU_ISOLATION=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_CONTEXT_TRACKING=y +# CONFIG_CONTEXT_TRACKING_FORCE is not set +CONFIG_RCU_NOCB_CPU=y +CONFIG_BUILD_BIN2C=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y +# CONFIG_CGROUP_FILES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_HAVE_PCSPKR_PLATFORM=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +CONFIG_SGETMASK_SYSCALL=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT_ALWAYS_ON=y +CONFIG_USERFAULTFD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLAB_MERGE_DEFAULT=y +CONFIG_SLAB_FREELIST_RANDOM=y +# CONFIG_SLAB_FREELIST_HARDENED is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_64BIT=y +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_MMU=y +CONFIG_ARCH_MMAP_RND_BITS_MIN=28 +CONFIG_ARCH_MMAP_RND_BITS_MAX=32 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_FILTER_PGPROT=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ZONE_DMA32=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_HAVE_INTEL_TXT=y +CONFIG_X86_64_SMP=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_DYNAMIC_PHYSICAL_MASK=y +CONFIG_PGTABLE_LEVELS=5 +CONFIG_CC_HAS_SANE_STACKPROTECTOR=y + +# +# Processor type and features +# +CONFIG_ZONE_DMA=y +CONFIG_SMP=y +CONFIG_X86_FEATURE_NAMES=y +CONFIG_X86_X2APIC=y +CONFIG_X86_MPPARSE=y +# CONFIG_GOLDFISH is not set +CONFIG_RETPOLINE=y +# CONFIG_INTEL_RDT is not set +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_NUMACHIP is not set +# CONFIG_X86_VSMP is not set +CONFIG_X86_UV=y +# CONFIG_X86_GOLDFISH is not set +# CONFIG_X86_INTEL_MID is not set +CONFIG_X86_INTEL_LPSS=y +CONFIG_X86_AMD_PLATFORM_DEVICE=y +CONFIG_IOSF_MBI=y +# CONFIG_IOSF_MBI_DEBUG is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_DEBUG is not set +CONFIG_PARAVIRT_SPINLOCKS=y +# CONFIG_QUEUED_LOCK_STAT is not set +CONFIG_XEN=y +# CONFIG_XEN_PV is not set +CONFIG_XEN_PVHVM=y +CONFIG_XEN_PVHVM_SMP=y +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +# CONFIG_XEN_PVH is not set +CONFIG_KVM_GUEST=y +# CONFIG_KVM_DEBUG_FS is not set +CONFIG_PARAVIRT_TIME_ACCOUNTING=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_JAILHOUSE_GUEST is not set +CONFIG_NO_BOOTMEM=y +# CONFIG_MK8 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set +CONFIG_GENERIC_CPU=y +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +# CONFIG_GART_IOMMU is not set +# CONFIG_CALGARY_IOMMU is not set +CONFIG_MAXSMP=y +CONFIG_NR_CPUS_RANGE_BEGIN=8192 +CONFIG_NR_CPUS_RANGE_END=8192 +CONFIG_NR_CPUS_DEFAULT=8192 +CONFIG_NR_CPUS=8192 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_MC_PRIO=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCELOG_LEGACY=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y + +# +# Performance monitoring +# +CONFIG_PERF_EVENTS_INTEL_UNCORE=m +CONFIG_PERF_EVENTS_INTEL_RAPL=m +CONFIG_PERF_EVENTS_INTEL_CSTATE=m +CONFIG_PERF_EVENTS_AMD_POWER=m +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX64=y +CONFIG_X86_VSYSCALL_EMULATION=y +CONFIG_I8K=m +CONFIG_MICROCODE=y +CONFIG_MICROCODE_INTEL=y +CONFIG_MICROCODE_AMD=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y +CONFIG_X86_5LEVEL=y +CONFIG_X86_DIRECT_GBPAGES=y +CONFIG_ARCH_HAS_MEM_ENCRYPT=y +CONFIG_AMD_MEM_ENCRYPT=y +# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set +CONFIG_NUMA=y +# CONFIG_NUMA_AWARE_SPINLOCKS is not set +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=10 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +# CONFIG_ARCH_MEMORY_PROBE is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_X86_PMEM_LEGACY_DEVICE=y +CONFIG_X86_PMEM_LEGACY=m +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set +CONFIG_X86_RESERVE_LOW=64 +CONFIG_MTRR=y +CONFIG_MTRR_SANITIZER=y +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 +CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_ARCH_RANDOM=y +CONFIG_X86_SMAP=y +CONFIG_X86_INTEL_UMIP=y +# CONFIG_X86_INTEL_MPX is not set +CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y +CONFIG_X86_INTEL_TSX_MODE_OFF=y +# CONFIG_X86_INTEL_TSX_MODE_ON is not set +# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set +CONFIG_EFI=y +CONFIG_EFI_STUB=y +CONFIG_EFI_MIXED=y +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_ARCH_HAS_KEXEC_PURGATORY=y +CONFIG_KEXEC_VERIFY_SIG=y +CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y +CONFIG_CRASH_DUMP=y +CONFIG_KEXEC_JUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_X86_NEED_RELOCS=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_DYNAMIC_MEMORY_LAYOUT=y +CONFIG_RANDOMIZE_MEMORY=y +CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa +CONFIG_HOTPLUG_CPU=y +CONFIG_BOOTPARAM_HOTPLUG_CPU0=y +# CONFIG_DEBUG_HOTPLUG_CPU0 is not set +# CONFIG_COMPAT_VDSO is not set +CONFIG_LEGACY_VSYSCALL_EMULATE=y +# CONFIG_LEGACY_VSYSCALL_NONE is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MODIFY_LDT_SYSCALL=y +CONFIG_HAVE_LIVEPATCH_FTRACE=y + +# +# Enable Livepatch +# +# CONFIG_LIVEPATCH is not set +CONFIG_ARCH_HAS_ADD_PAGES=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y +CONFIG_ARCH_ENABLE_THP_MIGRATION=y + +# +# Power management and ACPI options +# +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_PM_TRACE_RTC is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +CONFIG_ACPI_LPIT=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS_POWER is not set +CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y +CONFIG_ACPI_EC_DEBUGFS=m +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=y +CONFIG_ACPI_TAD=m +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_CPU_FREQ_PSS=y +CONFIG_ACPI_PROCESSOR_CSTATE=y +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y +CONFIG_ACPI_HOTPLUG_IOAPIC=y +CONFIG_ACPI_SBS=m +CONFIG_ACPI_HED=y +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_BGRT=y +CONFIG_ACPI_NFIT=m +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=m +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +CONFIG_DPTF_POWER=m +CONFIG_ACPI_WATCHDOG=y +CONFIG_ACPI_EXTLOG=m +CONFIG_PMIC_OPREGION=y +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_X86_PM_TIMER=y +CONFIG_SFI=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set + +# +# CPU frequency scaling drivers +# +CONFIG_X86_INTEL_PSTATE=y +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_ACPI_CPUFREQ=m +CONFIG_X86_ACPI_CPUFREQ_CPB=y +CONFIG_X86_POWERNOW_K8=m +CONFIG_X86_AMD_FREQ_SENSITIVITY=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +CONFIG_X86_P4_CLOCKMOD=m + +# +# shared options +# +CONFIG_X86_SPEEDSTEP_LIB=m + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_INTEL_IDLE=y + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_XEN=y +CONFIG_PCI_DOMAINS=y +CONFIG_MMCONF_FAM10H=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIEAER_INJECT=m +CONFIG_PCIE_ECRC=y +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +CONFIG_PCIE_DPC=y +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=y +CONFIG_PCI_PF_STUB=m +# CONFIG_XEN_PCIDEV_FRONTEND is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_LOCKLESS_CONFIG=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_HYPERV=m +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +CONFIG_HOTPLUG_PCI_SHPC=y + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +CONFIG_VMD=y + +# +# DesignWare PCI Core Support +# +# CONFIG_PCIE_DW_PLAT_HOST is not set +# CONFIG_HISILICON_PCIE_CAE is not set + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set +CONFIG_ISA_DMA_API=y +CONFIG_AMD_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA is not set +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_RAPIDIO is not set +# CONFIG_X86_SYSFB is not set + +# +# Binary Emulations +# +CONFIG_IA32_EMULATION=y +# CONFIG_X86_X32 is not set +CONFIG_COMPAT_32=y +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_X86_DEV_DMA_OPS=y +CONFIG_HAVE_GENERIC_GUP=y + +# +# Firmware Drivers +# +CONFIG_EDD=m +# CONFIG_EDD_OFF is not set +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DELL_RBU=m +CONFIG_DCDBAS=m +CONFIG_DMIID=y +CONFIG_DMI_SYSFS=y +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m +CONFIG_FW_CFG_SYSFS=y +# CONFIG_FW_CFG_SYSFS_CMDLINE is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_ESRT=y +CONFIG_EFI_VARS_PSTORE=y +CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y +CONFIG_EFI_RUNTIME_MAP=y +# CONFIG_EFI_FAKE_MEMMAP is not set +CONFIG_EFI_RUNTIME_WRAPPERS=y +# CONFIG_EFI_BOOTLOADER_CONTROL is not set +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_APPLE_PROPERTIES=y +# CONFIG_RESET_ATTACK_MITIGATION is not set +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_X86=y +CONFIG_EFI_DEV_PATH_PARSER=y + +# +# Tegra firmware driver +# +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_KVM_ASYNC_PF=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +CONFIG_KVM_INTEL=m +CONFIG_KVM_AMD=m +CONFIG_KVM_AMD_SEV=y +CONFIG_KVM_MMU_AUDIT=y +CONFIG_VHOST_NET=m +# CONFIG_VHOST_SCSI is not set +CONFIG_VHOST_VSOCK=m +CONFIG_VHOST=m +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +CONFIG_HOTPLUG_SMT=y +CONFIG_OPROFILE=m +CONFIG_OPROFILE_EVENT_MULTIPLEX=y +CONFIG_HAVE_OPROFILE=y +CONFIG_OPROFILE_NMI_TIMER=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +CONFIG_OPTPROBES=y +CONFIG_KPROBES_ON_FTRACE=y +CONFIG_UPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_RCU_TABLE_INVALIDATE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_HAVE_EXIT_THREAD=y +CONFIG_ARCH_MMAP_RND_BITS=28 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 +CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_STACK_VALIDATION=y +CONFIG_HAVE_RELIABLE_STACKTRACE=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_REFCOUNT=y +# CONFIG_REFCOUNT_FULL is not set +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_PLUGIN_HOSTCC="g++" +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +# CONFIG_MODULE_SIG_FORCE is not set +CONFIG_MODULE_SIG_ALL=y +# CONFIG_MODULE_SIG_SHA1 is not set +# CONFIG_MODULE_SIG_SHA224 is not set +CONFIG_MODULE_SIG_SHA256=y +# CONFIG_MODULE_SIG_SHA384 is not set +# CONFIG_MODULE_SIG_SHA512 is not set +CONFIG_MODULE_SIG_HASH="sha256" +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y +CONFIG_BLK_DEBUG_FS=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_MQ_RDMA=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_HAVE_BOOTMEM_INFO_NODE=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_ARCH_WANTS_THP_SWAP=y +CONFIG_THP_SWAP=y +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +# CONFIG_SHRINK_PAGECACHE is not set +# CONFIG_CMA is not set +CONFIG_MEM_SOFT_DIRTY=y +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +# CONFIG_Z3FOLD is not set +CONFIG_ZSMALLOC=y +# CONFIG_PGTABLE_MAPPING is not set +CONFIG_ZSMALLOC_STAT=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_DEFERRED_STRUCT_PAGE_INIT=y +CONFIG_IDLE_PAGE_TRACKING=y +CONFIG_ARCH_HAS_ZONE_DEVICE=y +CONFIG_ZONE_DEVICE=y +CONFIG_ARCH_HAS_HMM=y +CONFIG_MIGRATE_VMA_HELPER=y +CONFIG_DEV_PAGEMAP_OPS=y +CONFIG_HMM=y +CONFIG_HMM_MIRROR=y +CONFIG_DEVICE_PRIVATE=y +CONFIG_DEVICE_PUBLIC=y +CONFIG_FRAME_VECTOR=y +CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y +CONFIG_ARCH_HAS_PKEYS=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_NET=y +CONFIG_NET_INGRESS=y +CONFIG_NET_EGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_TLS=m +CONFIG_TLS_DEVICE=y +CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_INTERFACE=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +# CONFIG_SMC is not set +CONFIG_XDP_SOCKETS=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE_COMMON=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_INET_RAW_DIAG=m +# CONFIG_INET_DIAG_DESTROY is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +# CONFIG_TCP_CONG_CDG is not set +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +# CONFIG_IPV6_ILA is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_FAMILY_BRIDGE=y +CONFIG_NETFILTER_FAMILY_ARP=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_OSF=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NETFILTER_CONNCOUNT=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=y +CONFIG_NF_NAT_PROTO_UDPLITE=y +CONFIG_NF_NAT_PROTO_SCTP=y +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_SET=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_CONNLIMIT=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +# CONFIG_NFT_TUNNEL is not set +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +# CONFIG_NFT_SOCKET is not set +# CONFIG_NFT_OSF is not set +# CONFIG_NFT_TPROXY is not set +CONFIG_NF_DUP_NETDEV=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +# CONFIG_NF_FLOW_TABLE is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_IPMAC=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_MH is not set +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS MH scheduler +# +CONFIG_IP_VS_MH_TAB_INDEX=12 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_SOCKET_IPV4=m +CONFIG_NF_TPROXY_IPV4=m +CONFIG_NF_TABLES_IPV4=y +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_DUP_IPV4=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=y +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_SOCKET_IPV6=m +CONFIG_NF_TPROXY_IPV6=m +CONFIG_NF_TABLES_IPV6=y +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_DUP_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_INET_SCTP_DIAG=m +# CONFIG_RDS is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_IB=y +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_DIAG=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +# CONFIG_ATM_MPOA is not set +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +CONFIG_6LOWPAN=m +# CONFIG_6LOWPAN_DEBUGFS is not set +# CONFIG_6LOWPAN_NHC is not set +CONFIG_IEEE802154=m +# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +# CONFIG_NET_SCH_CBS is not set +# CONFIG_NET_SCH_ETF is not set +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +# CONFIG_NET_SCH_SKBPRIO is not set +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=y +# CONFIG_NET_SCH_CAKE is not set +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_DEFAULT_FQ is not set +# CONFIG_DEFAULT_CODEL is not set +CONFIG_DEFAULT_FQ_CODEL=y +# CONFIG_DEFAULT_SFQ is not set +# CONFIG_DEFAULT_PFIFO_FAST is not set +CONFIG_DEFAULT_NET_SCH="fq_codel" + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +# CONFIG_NET_EMATCH_CANID is not set +CONFIG_NET_EMATCH_IPSET=m +# CONFIG_NET_EMATCH_IPT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_SAMPLE=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_ACT_SKBMOD=m +# CONFIG_NET_ACT_IFE is not set +CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=m +# CONFIG_BATMAN_ADV is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +CONFIG_VSOCKETS=m +CONFIG_VSOCKETS_DIAG=m +CONFIG_VMWARE_VMCI_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS_COMMON=m +CONFIG_HYPERV_VSOCKETS=m +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_NET_NSH=y +# CONFIG_HSR is not set +CONFIG_NET_SWITCHDEV=y +CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_BPF_STREAM_PARSER=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=y +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_VXCAN is not set +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_C_CAN_PCI=m +CONFIG_CAN_CC770=m +# CONFIG_CAN_CC770_ISA is not set +CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_PEAK_PCIEFD is not set +CONFIG_CAN_SJA1000=m +# CONFIG_CAN_SJA1000_ISA is not set +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_PEAK_PCIEC=y +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SOFTING=m + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set + +# +# CAN USB interfaces +# +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +# CONFIG_CAN_GS_USB is not set +CONFIG_CAN_KVASER_USB=m +# CONFIG_CAN_MCBA_USB is not set +CONFIG_CAN_PEAK_USB=m +# CONFIG_CAN_UCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_CMTP=m +CONFIG_BT_HIDP=m +CONFIG_BT_HS=y +CONFIG_BT_LE=y +# CONFIG_BT_6LOWPAN is not set +# CONFIG_BT_LEDS is not set +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_RTL=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTUSB_RTL=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_STREAM_PARSER=y +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +CONFIG_MAC80211_DEBUGFS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y +# CONFIG_NFC is not set +CONFIG_PSAMPLE=m +# CONFIG_NET_IFE is not set +CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_SOCK_VALIDATE_XMIT=y +CONFIG_NET_DEVLINK=y +CONFIG_MAY_USE_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=m +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# +CONFIG_FW_LOADER=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set + +# +# Bus devices +# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_GNSS is not set +CONFIG_MTD=m +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# Partition parsers +# + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_SPI_NAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_SPI_NOR is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_MTD_HISILICON_SFC=m +# CONFIG_OF is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_PNP=y +# CONFIG_PNP_DEBUG_MESSAGES is not set + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +# CONFIG_BLK_DEV_FD is not set +CONFIG_CDROM=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y +# CONFIG_ZRAM_MEMORY_TRACKING is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_VIRTIO_BLK=m +# CONFIG_VIRTIO_BLK_SCSI is not set +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# NVME Support +# +CONFIG_NVME_CORE=m +CONFIG_BLK_DEV_NVME=m +CONFIG_NVME_MULTIPATH=y +CONFIG_NVME_FABRICS=m +CONFIG_NVME_RDMA=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_RDMA=m +CONFIG_NVME_TARGET_FC=m +CONFIG_NVME_TARGET_FCLOOP=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +# CONFIG_ICS932S401 is not set +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_SGI_XP=m +CONFIG_HP_ILO=m +CONFIG_SGI_GRU=m +# CONFIG_SGI_GRU_DEBUG is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +CONFIG_VMWARE_BALLOON=m +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +# CONFIG_SRAM is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_MISC_RTSX=m +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_ALTERA_STAPL=m +CONFIG_INTEL_MEI=m +CONFIG_INTEL_MEI_ME=m +# CONFIG_INTEL_MEI_TXE is not set +CONFIG_VMWARE_VMCI=m + +# +# Intel MIC & related support +# + +# +# Intel MIC Bus Driver +# +# CONFIG_INTEL_MIC_BUS is not set + +# +# SCIF Bus Driver +# +# CONFIG_SCIF_BUS is not set + +# +# VOP Bus Driver +# +# CONFIG_VOP_BUS is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +CONFIG_MISC_RTSX_PCI=m +CONFIG_MISC_RTSX_USB=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_MQ_DEFAULT=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +CONFIG_SCSI_AACRAID=m +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SMARTPQI=m +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_VMWARE_PVSCSI=m +# CONFIG_XEN_SCSI_FRONTEND is not set +CONFIG_HYPERV_STORAGE=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +CONFIG_FCOE_FNIC=m +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_ISCI is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA_FC=m +# CONFIG_TCM_QLA2XXX is not set +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_QEDI=m +CONFIG_QEDF=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=y +CONFIG_SCSI_DH_HP_SW=y +CONFIG_SCSI_DH_EMC=y +CONFIG_SCSI_DH_ALUA=y +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +CONFIG_SATA_MOBILE_LPM_POLICY=0 +CONFIG_SATA_AHCI_PLATFORM=m +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +CONFIG_ATA_PIIX=m +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +CONFIG_ATA_GENERIC=m +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +# CONFIG_MD_MULTIPATH is not set +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +# CONFIG_BCACHE is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +CONFIG_DM_DEBUG=y +CONFIG_DM_BUFIO=m +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_UNSTRIPED is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_SMQ=m +CONFIG_DM_WRITECACHE=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_FEC is not set +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_DM_INTEGRITY=m +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +# CONFIG_TCM_FC is not set +CONFIG_ISCSI_TARGET=m +CONFIG_ISCSI_TARGET_CXGB4=m +# CONFIG_SBP_TARGET is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +CONFIG_FUSION_LOGGING=y + +# +# IEEE 1394 (FireWire) support +# +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +# CONFIG_EQUALIZER is not set +CONFIG_NET_FC=y +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_IPVTAP=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +# CONFIG_GTP is not set +CONFIG_MACSEC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_VSOCKMON=m +# CONFIG_ARCNET is not set +# CONFIG_ATM_DRIVERS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_MDIO=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_ENA_ETHERNET=m +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=m +# CONFIG_AMD_XGBE_DCB is not set +CONFIG_AMD_XGBE_HAVE_ECC=y +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_AQTION=m +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_VENDOR_ATHEROS=y +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_TIGON3=m +CONFIG_TIGON3_HWMON=y +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +# CONFIG_SYSTEMPORT is not set +CONFIG_BNXT=m +CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_FLOWER_OFFLOAD=y +CONFIG_BNXT_DCB=y +CONFIG_BNXT_HWMON=y +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CADENCE=y +# CONFIG_MACB is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +CONFIG_CAVIUM_PTP=y +CONFIG_LIQUIDIO=m +CONFIG_LIQUIDIO_VF=m +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4=m +# CONFIG_CHELSIO_T4_DCB is not set +CONFIG_CHELSIO_T4VF=m +CONFIG_CHELSIO_LIB=m +CONFIG_NET_VENDOR_CISCO=y +CONFIG_ENIC=m +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_CX_ECAT is not set +CONFIG_DNET=m +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +CONFIG_DL2K=m +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +CONFIG_BE2NET=m +CONFIG_BE2NET_HWMON=y +# CONFIG_BE2NET_BE2 is not set +# CONFIG_BE2NET_BE3 is not set +CONFIG_BE2NET_LANCER=y +CONFIG_BE2NET_SKYHAWK=y +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_I825XX is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_E1000E_HWTS=y +CONFIG_IGB=m +CONFIG_IGB_HWMON=y +CONFIG_IGB_DCA=y +CONFIG_IGBVF=m +# CONFIG_IXGB is not set +CONFIG_IXGBE=m +CONFIG_IXGBE_HWMON=y +CONFIG_IXGBE_DCA=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_DCB=y +CONFIG_I40EVF=m +CONFIG_ICE=m +CONFIG_FM10K=m +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_EN_DCB=y +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX4_CORE_GEN2 is not set +CONFIG_MLX5_CORE=m +CONFIG_MLX5_ACCEL=y +CONFIG_MLX5_FPGA=y +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +CONFIG_MLX5_ESWITCH=y +CONFIG_MLX5_CORE_EN_DCB=y +CONFIG_MLX5_CORE_IPOIB=y +CONFIG_MLX5_EN_IPSEC=y +# CONFIG_MLX5_EN_TLS is not set +CONFIG_MLXSW_CORE=m +CONFIG_MLXSW_CORE_HWMON=y +CONFIG_MLXSW_CORE_THERMAL=y +CONFIG_MLXSW_PCI=m +CONFIG_MLXSW_I2C=m +CONFIG_MLXSW_SWITCHIB=m +CONFIG_MLXSW_SWITCHX2=m +CONFIG_MLXSW_SPECTRUM=m +CONFIG_MLXSW_SPECTRUM_DCB=y +CONFIG_MLXSW_MINIMAL=m +CONFIG_MLXFW=m +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +CONFIG_NET_VENDOR_MYRI=y +CONFIG_MYRI10GE=m +CONFIG_MYRI10GE_DCA=y +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_NET_VENDOR_NETERION=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NFP=m +CONFIG_NFP_APP_FLOWER=y +CONFIG_NFP_APP_ABM_NIC=y +# CONFIG_NFP_DEBUG is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +CONFIG_NET_VENDOR_OKI=y +CONFIG_ETHOC=m +CONFIG_NET_VENDOR_PACKET_ENGINES=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_QLA3XXX=m +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +CONFIG_NETXEN_NIC=m +CONFIG_QED=m +CONFIG_QED_LL2=y +CONFIG_QED_SRIOV=y +CONFIG_QEDE=m +CONFIG_QED_RDMA=y +CONFIG_QED_ISCSI=y +CONFIG_QED_FCOE=y +CONFIG_QED_OOO=y +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_ATP is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R8169=m +# CONFIG_NET_VENDOR_RENESAS is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_ROCKER=m +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_SFC=m +CONFIG_SFC_MTD=y +CONFIG_SFC_MCDI_MON=y +CONFIG_SFC_SRIOV=y +CONFIG_SFC_MCDI_LOGGING=y +# CONFIG_SFC_FALCON is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_CAVIUM=m +# CONFIG_MDIO_GPIO is not set +CONFIG_MDIO_MSCC_MIIM=m +CONFIG_MDIO_THUNDER=m +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +CONFIG_LED_TRIGGER_PHY=y + +# +# MII PHY device drivers +# +CONFIG_AMD_PHY=m +CONFIG_AQUANTIA_PHY=m +# CONFIG_AX88796B_PHY is not set +CONFIG_AT803X_PHY=m +CONFIG_BCM7XXX_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_BCM_NET_PHYLIB=m +CONFIG_BROADCOM_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_CORTINA_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_DP83822_PHY=m +CONFIG_DP83TC811_PHY=m +CONFIG_DP83848_PHY=m +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_ICPLUS_PHY=m +CONFIG_INTEL_XWAY_PHY=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_LXT_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MICREL_PHY=m +CONFIG_MICROCHIP_PHY=m +CONFIG_MICROCHIP_T1_PHY=m +CONFIG_MICROSEMI_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_RENESAS_PHY=m +CONFIG_ROCKCHIP_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_STE10XP=m +CONFIG_TERANETICS_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_XILINX_GMII2RGMII=m +CONFIG_MICREL_KS8995MA=m +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +# CONFIG_USB_NET_SR9800 is not set +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_WLAN=y +# CONFIG_WLAN_VENDOR_ADMTEK is not set +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_COMMON_DEBUG=y +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +CONFIG_ATH9K_AHB=y +CONFIG_ATH9K_DEBUGFS=y +# CONFIG_ATH9K_STATION_STATISTICS is not set +# CONFIG_ATH9K_DYNACK is not set +CONFIG_ATH9K_WOW=y +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +# CONFIG_ATH9K_HWRNG is not set +# CONFIG_ATH9K_COMMON_SPECTRAL is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_DEBUG is not set +CONFIG_ATH10K_DEBUGFS=y +# CONFIG_ATH10K_SPECTRAL is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_PROTO_MSGBUF=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +CONFIG_BRCMFMAC_PCIE=y +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +CONFIG_IWLDVM=m +CONFIG_IWLMVM=m +CONFIG_IWLWIFI_OPMODE_MODULAR=y +# CONFIG_IWLWIFI_BCAST_FILTERING is not set + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +CONFIG_IWLWIFI_DEBUGFS=y +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_MWIFIEX_USB=m +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_MT76_CORE=m +CONFIG_MT76_LEDS=y +CONFIG_MT76_USB=m +CONFIG_MT76x2_COMMON=m +CONFIG_MT76x0U=m +# CONFIG_MT76x2E is not set +CONFIG_MT76x2U=m +CONFIG_WLAN_VENDOR_RALINK=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +CONFIG_RT2800PCI=m +CONFIG_RT2800PCI_RT33XX=y +CONFIG_RT2800PCI_RT35XX=y +CONFIG_RT2800PCI_RT53XX=y +CONFIG_RT2800PCI_RT3290=y +# CONFIG_RT2500USB is not set +# CONFIG_RT73USB is not set +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RT2800_LIB=m +CONFIG_RT2800_LIB_MMIO=m +CONFIG_RT2X00_LIB_MMIO=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +CONFIG_RT2X00_LIB_DEBUGFS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +CONFIG_RTL8192DE=m +CONFIG_RTL8723AE=m +CONFIG_RTL8723BE=m +CONFIG_RTL8188EE=m +CONFIG_RTL8192EE=m +CONFIG_RTL8821AE=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_PCI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_RTL8723_COMMON=m +CONFIG_RTLBTCOEXIST=m +CONFIG_RTL8XXXU=m +# CONFIG_RTL8XXXU_UNTESTED is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +# CONFIG_QTNFMAC_PEARL_PCIE is not set +CONFIG_MAC80211_HWSIM=m +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +CONFIG_WAN=y +# CONFIG_LANMEDIA is not set +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300TOO is not set +# CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +# CONFIG_SBNI is not set +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKELB=m +# CONFIG_IEEE802154_AT86RF230 is not set +# CONFIG_IEEE802154_MRF24J40 is not set +# CONFIG_IEEE802154_CC2520 is not set +# CONFIG_IEEE802154_ATUSB is not set +# CONFIG_IEEE802154_ADF7242 is not set +# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_IEEE802154_MCR20A is not set +# CONFIG_IEEE802154_HWSIM is not set +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_VMXNET3=m +CONFIG_FUJITSU_ES=m +CONFIG_THUNDERBOLT_NET=m +CONFIG_HYPERV_NET=m +CONFIG_NETDEVSIM=m +CONFIG_NET_FAILOVER=m +CONFIG_ISDN=y +CONFIG_ISDN_I4L=m +CONFIG_ISDN_PPP=y +CONFIG_ISDN_PPP_VJ=y +CONFIG_ISDN_MPP=y +CONFIG_IPPP_FILTER=y +# CONFIG_ISDN_PPP_BSDCOMP is not set +CONFIG_ISDN_AUDIO=y +CONFIG_ISDN_TTY_FAX=y + +# +# ISDN feature submodules +# +CONFIG_ISDN_DIVERSION=m + +# +# ISDN4Linux hardware drivers +# + +# +# Passive cards +# +CONFIG_ISDN_DRV_HISAX=m + +# +# D-channel protocol features +# +CONFIG_HISAX_EURO=y +CONFIG_DE_AOC=y +CONFIG_HISAX_NO_SENDCOMPLETE=y +CONFIG_HISAX_NO_LLC=y +CONFIG_HISAX_NO_KEYPAD=y +CONFIG_HISAX_1TR6=y +CONFIG_HISAX_NI1=y +CONFIG_HISAX_MAX_CARDS=8 + +# +# HiSax supported cards +# +CONFIG_HISAX_16_3=y +CONFIG_HISAX_TELESPCI=y +CONFIG_HISAX_S0BOX=y +CONFIG_HISAX_FRITZPCI=y +CONFIG_HISAX_AVM_A1_PCMCIA=y +CONFIG_HISAX_ELSA=y +CONFIG_HISAX_DIEHLDIVA=y +CONFIG_HISAX_SEDLBAUER=y +CONFIG_HISAX_NETJET=y +CONFIG_HISAX_NETJET_U=y +CONFIG_HISAX_NICCY=y +CONFIG_HISAX_BKM_A4T=y +CONFIG_HISAX_SCT_QUADRO=y +CONFIG_HISAX_GAZEL=y +CONFIG_HISAX_HFC_PCI=y +CONFIG_HISAX_W6692=y +CONFIG_HISAX_HFC_SX=y +CONFIG_HISAX_ENTERNOW_PCI=y +# CONFIG_HISAX_DEBUG is not set + +# +# HiSax PCMCIA card service modules +# + +# +# HiSax sub driver modules +# +CONFIG_HISAX_ST5481=m +# CONFIG_HISAX_HFCUSB is not set +CONFIG_HISAX_HFC4S8S=m +CONFIG_HISAX_FRITZ_PCIPNP=m +CONFIG_ISDN_CAPI=m +# CONFIG_CAPI_TRACE is not set +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_MIDDLEWARE=y +CONFIG_ISDN_CAPI_CAPIDRV=m +CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE=y + +# +# CAPI hardware drivers +# +CONFIG_CAPI_AVM=y +CONFIG_ISDN_DRV_AVMB1_B1PCI=m +CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y +CONFIG_ISDN_DRV_AVMB1_T1PCI=m +CONFIG_ISDN_DRV_AVMB1_C4=m +# CONFIG_CAPI_EICON is not set +CONFIG_ISDN_DRV_GIGASET=m +CONFIG_GIGASET_CAPI=y +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +CONFIG_GIGASET_M101=m +# CONFIG_GIGASET_DEBUG is not set +CONFIG_HYSDN=m +CONFIG_HYSDN_CAPI=y +CONFIG_MISDN=m +CONFIG_MISDN_DSP=m +CONFIG_MISDN_L1OIP=m + +# +# mISDN hardware drivers +# +CONFIG_MISDN_HFCPCI=m +CONFIG_MISDN_HFCMULTI=m +CONFIG_MISDN_HFCUSB=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m +CONFIG_ISDN_HDLC=m +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_VMMOUSE=y +CONFIG_MOUSE_PS2_SMBUS=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +CONFIG_MOUSE_ELAN_I2C_SMBUS=y +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +# CONFIG_TABLET_USB_HANWANG is not set +CONFIG_TABLET_USB_KBTAB=m +# CONFIG_TABLET_USB_PEGASUS is not set +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2004 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_STMFTS is not set +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set +# CONFIG_TOUCHSCREEN_SX8654 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZET6223 is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_MMA8450 is not set +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_GP2A=m +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m +# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_SPI=m +CONFIG_RMI4_SMB=m +CONFIG_RMI4_F03=y +CONFIG_RMI4_F03_SERIO=m +CONFIG_RMI4_2D_SENSOR=y +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y +CONFIG_RMI4_F30=y +CONFIG_RMI4_F34=y +# CONFIG_RMI4_F54 is not set +CONFIG_RMI4_F55=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +CONFIG_SERIO_ARC_PS2=m +CONFIG_HYPERV_KEYBOARD=m +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_NOZOMI=m +# CONFIG_ISI is not set +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_LPSS=y +CONFIG_SERIAL_8250_MID=y +# CONFIG_SERIAL_8250_MOXA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +CONFIG_SERIAL_JSM=m +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_ARC=m +CONFIG_SERIAL_ARC_NR_PORTS=1 +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_DEV_BUS is not set +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PANIC_EVENT=y +CONFIG_IPMI_PANIC_STRING=y +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_SSIF=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_NVRAM=y +# CONFIG_APPLICOM is not set +# CONFIG_MWAVE is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP_DEFAULT is not set +CONFIG_HANGCHECK_TIMER=m +CONFIG_UV_MMTIMER=m +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +CONFIG_TCG_TIS_CORE=y +CONFIG_TCG_TIS=y +# CONFIG_TCG_TIS_SPI is not set +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m +# CONFIG_TCG_XEN is not set +CONFIG_TCG_CRB=y +# CONFIG_TCG_VTPM_PROXY is not set +CONFIG_TCG_TIS_ST33ZP24=m +CONFIG_TCG_TIS_ST33ZP24_I2C=m +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +CONFIG_TELCLOCK=m +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set +# CONFIG_RANDOM_TRUST_CPU is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=m + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_REG is not set +CONFIG_I2C_MUX_MLXCPLD=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_SMBUS=m +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=m +CONFIG_I2C_ISCH=m +CONFIG_I2C_ISMT=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m + +# +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +CONFIG_I2C_DESIGNWARE_BAYTRAIL=y +# CONFIG_I2C_EMEV2 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_MLXCPLD=m +CONFIG_I2C_STUB=m +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +CONFIG_PTP_1588_CLOCK_KVM=m +CONFIG_PINCTRL=y +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AMD=m +# CONFIG_PINCTRL_MCP23S08 is not set +# CONFIG_PINCTRL_SX150X is not set +CONFIG_PINCTRL_BAYTRAIL=y +# CONFIG_PINCTRL_CHERRYVIEW is not set +CONFIG_PINCTRL_INTEL=m +CONFIG_PINCTRL_BROXTON=m +CONFIG_PINCTRL_CANNONLAKE=m +CONFIG_PINCTRL_CEDARFORK=m +CONFIG_PINCTRL_DENVERTON=m +CONFIG_PINCTRL_GEMINILAKE=m +CONFIG_PINCTRL_ICELAKE=m +CONFIG_PINCTRL_LEWISBURG=m +CONFIG_PINCTRL_SUNRISEPOINT=m +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=m + +# +# Memory mapped GPIO drivers +# +CONFIG_GPIO_AMDPT=m +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_GENERIC_PLATFORM is not set +CONFIG_GPIO_ICH=m +# CONFIG_GPIO_LYNXPOINT is not set +# CONFIG_GPIO_MB86S7X is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_VX855 is not set + +# +# Port-mapped I/O GPIO drivers +# +# CONFIG_GPIO_F7188X is not set +# CONFIG_GPIO_IT87 is not set +# CONFIG_GPIO_SCH is not set +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_WINBOND is not set +# CONFIG_GPIO_WS16C48 is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set + +# +# MFD GPIO expanders +# + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +# CONFIG_W1 is not set +# CONFIG_POWER_AVS is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set +# CONFIG_BATTERY_BQ27XXX is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_LTC3651 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +CONFIG_CHARGER_SMB347=m +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +# CONFIG_SENSORS_ADT7310 is not set +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m +CONFIG_SENSORS_FAM15H_POWER=m +CONFIG_SENSORS_APPLESMC=m +CONFIG_SENSORS_ASB100=m +# CONFIG_SENSORS_ASPEED is not set +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DELL_SMM=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_FSCHMD=m +# CONFIG_SENSORS_FTSTEUTATES is not set +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_HIH6130 is not set +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +# CONFIG_SENSORS_IIO_HWMON is not set +CONFIG_SENSORS_I5500=m +CONFIG_SENSORS_CORETEMP=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +# CONFIG_SENSORS_POWR1220 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +# CONFIG_SENSORS_LTC4222 is not set +CONFIG_SENSORS_LTC4245=m +# CONFIG_SENSORS_LTC4260 is not set +CONFIG_SENSORS_LTC4261=m +# CONFIG_SENSORS_MAX1111 is not set +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +# CONFIG_SENSORS_MAX31790 is not set +CONFIG_SENSORS_MCP3021=m +# CONFIG_SENSORS_MLXREG_FAN is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +CONFIG_SENSORS_LM63=m +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NCT6683 is not set +CONFIG_SENSORS_NCT6775=m +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +# CONFIG_SENSORS_IBM_CFFPS is not set +# CONFIG_SENSORS_IR35221 is not set +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +# CONFIG_SENSORS_LTC3815 is not set +CONFIG_SENSORS_MAX16064=m +# CONFIG_SENSORS_MAX20751 is not set +# CONFIG_SENSORS_MAX31785 is not set +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +# CONFIG_SENSORS_TPS40422 is not set +# CONFIG_SENSORS_TPS53679 is not set +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +# CONFIG_SENSORS_EMC2103 is not set +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +# CONFIG_SENSORS_ADS7871 is not set +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83773G is not set +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +# CONFIG_SENSORS_XGENE is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_SENSORS_ATK0110=m +CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +CONFIG_THERMAL_GOV_USER_SPACE=y +# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_EMULATION is not set +CONFIG_INTEL_POWERCLAMP=m +CONFIG_X86_PKG_TEMP_THERMAL=m +CONFIG_INTEL_SOC_DTS_IOSF_CORE=m +# CONFIG_INTEL_SOC_DTS_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_INT340X_THERMAL=m +CONFIG_ACPI_THERMAL_REL=m +# CONFIG_INT3406_THERMAL is not set +CONFIG_INTEL_PCH_THERMAL=m +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_SYSFS=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WDAT_WDT=m +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +# CONFIG_EBC_C384_WDT is not set +CONFIG_F71808E_WDT=m +CONFIG_SP5100_TCO=m +CONFIG_SBC_FITPC2_WATCHDOG=m +# CONFIG_EUROTECH_WDT is not set +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +# CONFIG_WAFER_WDT is not set +CONFIG_I6300ESB_WDT=m +CONFIG_IE6XX_WDT=m +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_HPWDT_NMI_DECODING=y +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +CONFIG_NV_TCO=m +# CONFIG_60XX_WDT is not set +# CONFIG_CPU5_WDT is not set +CONFIG_SMSC_SCH311X_WDT=m +# CONFIG_SMSC37B787_WDT is not set +CONFIG_VIA_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +CONFIG_INTEL_MEI_WDT=m +# CONFIG_NI903X_WDT is not set +# CONFIG_NIC7018_WDT is not set +# CONFIG_MEN_A21_WDT is not set +CONFIG_XEN_WDT=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_BCMA=m +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_BD9571MWV is not set +# CONFIG_MFD_AXP20X_I2C is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set +CONFIG_LPC_ICH=m +CONFIG_LPC_SCH=m +# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set +CONFIG_MFD_INTEL_LPSS=y +CONFIG_MFD_INTEL_LPSS_ACPI=y +CONFIG_MFD_INTEL_LPSS_PCI=y +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +CONFIG_MFD_SM501=m +CONFIG_MFD_SM501_GPIO=y +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_SYSCON is not set +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +CONFIG_MFD_VX855=m +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_REGULATOR is not set +CONFIG_CEC_CORE=y +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +CONFIG_LIRC=y +CONFIG_RC_DECODERS=y +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +# CONFIG_IR_SHARP_DECODER is not set +CONFIG_IR_MCE_KBD_DECODER=m +# CONFIG_IR_XMP_DECODER is not set +CONFIG_IR_IMON_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_ENE=m +CONFIG_IR_IMON=m +CONFIG_IR_IMON_RAW=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_ITE_CIR=m +CONFIG_IR_FINTEK=m +CONFIG_IR_NUVOTON=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_WINBOND_CIR=m +# CONFIG_IR_IGORPLUGUSB is not set +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +# CONFIG_RC_LOOPBACK is not set +CONFIG_IR_SERIAL=m +CONFIG_IR_SERIAL_TRANSMITTER=y +CONFIG_IR_SIR=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +# CONFIG_MEDIA_SDR_SUPPORT is not set +CONFIG_MEDIA_CEC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2=m +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_DVB_CORE=m +# CONFIG_DVB_MMAP is not set +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set + +# +# Media drivers +# +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +# CONFIG_USB_GSPCA_DTCS033 is not set +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +# CONFIG_USB_GSPCA_KINECT is not set +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +# CONFIG_USB_GSPCA_STK1135 is not set +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TOUPTEK is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +# CONFIG_VIDEO_USBTV is not set + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +# CONFIG_VIDEO_AU0828_RC is not set +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_DIB3000MC=m +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +# CONFIG_DVB_USB_DVBSKY is not set +# CONFIG_DVB_USB_ZD1301 is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +# CONFIG_VIDEO_EM28XX_V4L2 is not set +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# USB HDMI CEC adapters +# +CONFIG_USB_PULSE8_CEC=m +CONFIG_USB_RAINSHADOW_CEC=m +CONFIG_MEDIA_PCI_SUPPORT=y + +# +# Media capture support +# +# CONFIG_VIDEO_MEYE is not set +# CONFIG_VIDEO_SOLO6X10 is not set +# CONFIG_VIDEO_TW5864 is not set +# CONFIG_VIDEO_TW68 is not set +# CONFIG_VIDEO_TW686X is not set + +# +# Media capture/analog TV support +# +CONFIG_VIDEO_IVTV=m +# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set +# CONFIG_VIDEO_IVTV_ALSA is not set +CONFIG_VIDEO_FB_IVTV=m +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DT3155 is not set + +# +# Media capture/analog/hybrid TV support +# +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +# CONFIG_VIDEO_CX25821 is not set +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_RC=y +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m + +# +# Media digital TV PCI Adapters +# +CONFIG_DVB_AV7110_IR=y +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +# CONFIG_DVB_PT3 is not set +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set +# CONFIG_DVB_SMIPCIE is not set +# CONFIG_DVB_NETUP_UNIDVB is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set +CONFIG_CEC_PLATFORM_DRIVERS=y + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +# CONFIG_RADIO_SI470X is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_MR800 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_SHARK is not set +# CONFIG_RADIO_SHARK2 is not set +# CONFIG_USB_KEENE is not set +# CONFIG_USB_RAREMONO is not set +# CONFIG_USB_MA901 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# + +# +# Supported FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_INPUT=y +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS3308=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m + +# +# Camera sensor devices +# + +# +# Flash devices +# + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# SDR tuner chips +# + +# +# Miscellaneous helper chips +# +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA18250=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m +CONFIG_MEDIA_TUNER_QM1D1B0004=m + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV0910=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_STV6111=m +CONFIG_DVB_MXL5XX=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +CONFIG_DVB_GP8PSK_FE=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Common Interface (EN50221) controller drivers +# +CONFIG_DVB_CXD2099=m + +# +# Tools to develop new frontends +# +CONFIG_DVB_DUMMY_FE=m + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_INTEL_GTT=m +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=64 +CONFIG_VGA_SWITCHEROO=y +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_DP_AUX_CHARDEV=y +# CONFIG_DRM_DEBUG_SELFTEST is not set +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_DP_CEC=y +CONFIG_DRM_TTM=m +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +CONFIG_DRM_RADEON=m +CONFIG_DRM_RADEON_USERPTR=y +CONFIG_DRM_AMDGPU=m +# CONFIG_DRM_AMDGPU_SI is not set +# CONFIG_DRM_AMDGPU_CIK is not set +# CONFIG_DRM_AMDGPU_USERPTR is not set +# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_AMD_ACP=y + +# +# Display Engine Configuration +# +CONFIG_DRM_AMD_DC=y +CONFIG_DRM_AMD_DC_DCN1_0=y +# CONFIG_DEBUG_KERNEL_DC is not set + +# +# AMD Library routines +# +CONFIG_CHASH=m +# CONFIG_CHASH_STATS is not set +# CONFIG_CHASH_SELFTEST is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +# CONFIG_NOUVEAU_DEBUG_MMU is not set +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_I915=m +# CONFIG_DRM_I915_ALPHA_SUPPORT is not set +CONFIG_DRM_I915_CAPTURE_ERROR=y +CONFIG_DRM_I915_COMPRESS_ERROR=y +CONFIG_DRM_I915_USERPTR=y +CONFIG_DRM_I915_GVT=y +CONFIG_DRM_I915_GVT_KVMGT=m +# CONFIG_DRM_VGEM is not set +CONFIG_DRM_VKMS=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_VMWGFX_FBCON=y +CONFIG_DRM_GMA500=m +CONFIG_DRM_GMA600=y +CONFIG_DRM_GMA3600=y +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +CONFIG_HSA_AMD=m +# CONFIG_DRM_HISI_HIBMC is not set +# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_XEN is not set +# CONFIG_DRM_LEGACY is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y + +# +# Frame buffer Devices +# +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_BACKLIGHT=y +# CONFIG_FB_MODE_HELPERS is not set +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_VESA=y +CONFIG_FB_EFI=y +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_XEN_FBDEV_FRONTEND is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_HYPERV=m +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=m +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_OTM3225A is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_PWM is not set +CONFIG_BACKLIGHT_APPLE=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_PCM_ELD=y +CONFIG_SND_HWDEP=m +CONFIG_SND_SEQ_DEVICE=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=m +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_SEQUENCER_OSS=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_SEQ_MIDI_EVENT=m +CONFIG_SND_SEQ_MIDI=m +CONFIG_SND_SEQ_MIDI_EMUL=m +CONFIG_SND_SEQ_VIRMIDI=m +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_OPL3_LIB_SEQ=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_PCSP=m +CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_SERIAL_U16550 is not set +CONFIG_SND_MPU401=m +# CONFIG_SND_PORTMAN2X4 is not set +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5 +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +CONFIG_SND_ALI5451=m +CONFIG_SND_ASIHPI=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +# CONFIG_SND_CS4281 is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1_SEQ=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +# CONFIG_SND_ES1938 is not set +CONFIG_SND_ES1968=m +CONFIG_SND_ES1968_INPUT=y +CONFIG_SND_ES1968_RADIO=y +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +CONFIG_SND_LOLA=m +CONFIG_SND_LX6464ES=m +CONFIG_SND_MAESTRO3=m +CONFIG_SND_MAESTRO3_INPUT=y +CONFIG_SND_MIXART=m +# CONFIG_SND_NM256 is not set +CONFIG_SND_PCXHR=m +# CONFIG_SND_RIPTIDE is not set +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +# CONFIG_SND_SONICVIBES is not set +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +CONFIG_SND_HDA=m +CONFIG_SND_HDA_INTEL=m +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_RECONFIG=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_BEEP_MODE=0 +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_HDA_GENERIC=m +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_CORE=m +CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_COMPONENT=y +CONFIG_SND_HDA_I915=y +CONFIG_SND_HDA_EXT_CORE=m +CONFIG_SND_HDA_PREALLOC_SIZE=512 +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_US122L=m +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_FIREWIRE=y +CONFIG_SND_FIREWIRE_LIB=m +CONFIG_SND_DICE=m +CONFIG_SND_OXFW=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m +CONFIG_SND_FIREWIRE_DIGI00X=m +CONFIG_SND_FIREWIRE_TASCAM=m +CONFIG_SND_FIREWIRE_MOTU=m +CONFIG_SND_FIREFACE=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_COMPRESS=y +CONFIG_SND_SOC_TOPOLOGY=y +CONFIG_SND_SOC_ACPI=m +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_SOC_IMG is not set +CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y +CONFIG_SND_SST_IPC=m +CONFIG_SND_SST_IPC_ACPI=m +CONFIG_SND_SOC_INTEL_SST_ACPI=m +CONFIG_SND_SOC_INTEL_SST=m +CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m +CONFIG_SND_SOC_INTEL_HASWELL=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m +# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m +CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m +CONFIG_SND_SOC_INTEL_SKYLAKE=m +CONFIG_SND_SOC_ACPI_INTEL_MATCH=m +CONFIG_SND_SOC_INTEL_MACH=y +# CONFIG_SND_SOC_INTEL_HASWELL_MACH is not set +# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set +# CONFIG_SND_SOC_INTEL_BROADWELL_MACH is not set +CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m +CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m +# CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set + +# +# STMicroelectronics STM32 SOC audio support +# +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_ZX_TDM is not set +CONFIG_SND_SOC_I2C_AND_SPI=m + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_DA7213=m +CONFIG_SND_SOC_DA7219=m +CONFIG_SND_SOC_DMIC=m +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +CONFIG_SND_SOC_ES8316=m +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_GTM601 is not set +CONFIG_SND_SOC_HDAC_HDMI=m +# CONFIG_SND_SOC_INNO_RK3036 is not set +CONFIG_SND_SOC_MAX98090=m +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9867 is not set +CONFIG_SND_SOC_MAX98927=m +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +CONFIG_SND_SOC_RL6231=m +CONFIG_SND_SOC_RL6347A=m +CONFIG_SND_SOC_RT286=m +CONFIG_SND_SOC_RT298=m +CONFIG_SND_SOC_RT5514=m +CONFIG_SND_SOC_RT5514_SPI=m +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +CONFIG_SND_SOC_RT5640=m +CONFIG_SND_SOC_RT5645=m +CONFIG_SND_SOC_RT5651=m +CONFIG_SND_SOC_RT5663=m +CONFIG_SND_SOC_RT5670=m +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +CONFIG_SND_SOC_SSM4567=m +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +CONFIG_SND_SOC_TS3A227E=m +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +CONFIG_SND_SOC_NAU8824=m +CONFIG_SND_SOC_NAU8825=m +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SIMPLE_CARD is not set +CONFIG_SND_X86=y +CONFIG_HDMI_LPE_AUDIO=m +CONFIG_SND_SYNTH_EMUX=m +CONFIG_SND_XEN_FRONTEND=m +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=m +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +# CONFIG_HID_ACCUTOUCH is not set +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +CONFIG_HID_APPLE=m +CONFIG_HID_APPLEIR=m +CONFIG_HID_ASUS=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CORSAIR=m +# CONFIG_HID_COUGAR is not set +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CMEDIA=m +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EMS_FF is not set +CONFIG_HID_ELAN=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +# CONFIG_HOLTEK_FF is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_ITE=m +CONFIG_HID_JABRA=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LED=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m +CONFIG_HID_LOGITECH_HIDPP=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +CONFIG_HID_MAGICMOUSE=y +# CONFIG_HID_MAYFLASH is not set +# CONFIG_HID_REDRAGON is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTI=m +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +# CONFIG_HID_RETRODE is not set +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +# CONFIG_HID_STEAM is not set +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_HYPERV_MOUSE=m +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_HID_UDRAW_PS3 is not set +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +# CONFIG_ZEROPLUS_FF is not set +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=y +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_ALPS=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +CONFIG_I2C_HID=m + +# +# Intel ISH HID support +# +CONFIG_INTEL_ISH_HID=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_PCI=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_LEDS_TRIGGER_USBPORT=m +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DBGCAP=y +CONFIG_USB_XHCI_PCI=y +# CONFIG_USB_XHCI_PLATFORM is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_SIMPLE is not set +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +# CONFIG_USB_SERIAL_F81232 is not set +CONFIG_USB_SERIAL_F8153X=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_METRO is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +# CONFIG_USB_SERIAL_WISHBONE is not set +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_UPD78F0730=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set +CONFIG_USB_IOWARRIOR=m +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +CONFIG_USB_ISIGHTFW=m +# CONFIG_USB_YUREX is not set +CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_HUB_USB251XB is not set +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m + +# +# USB Physical Layer drivers +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +# CONFIG_USB_GADGET is not set +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +CONFIG_TYPEC_RT1711H=y +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_UCSI=y +CONFIG_UCSI_ACPI=y +CONFIG_TYPEC_TPS6598X=m + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +CONFIG_TYPEC_MUX_PI3USB30532=m + +# +# USB Type-C Alternate Mode drivers +# +CONFIG_TYPEC_DP_ALTMODE=y +CONFIG_USB_ROLE_SWITCH=y +CONFIG_USB_ROLES_INTEL_XHCI=y +CONFIG_USB_LED_TRIG=y +# CONFIG_USB_ULPI_BUS is not set +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=m +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI_ACPI=m +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_TIFM_SD=m +# CONFIG_MMC_SPI is not set +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_CQHCI=m +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_SDHCI_XENON is not set +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +# CONFIG_MS_BLOCK is not set + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set + +# +# LED drivers +# +# CONFIG_LEDS_APU is not set +CONFIG_LEDS_LM3530=m +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=m +# CONFIG_LEDS_LP3952 is not set +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +# CONFIG_LEDS_LP8501 is not set +CONFIG_LEDS_CLEVO_MAIL=m +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +CONFIG_LEDS_BLINKM=m +CONFIG_LEDS_MLXCPLD=m +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LEDS_NIC78BX is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_DISK=y +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_CPU is not set +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ON_DEMAND_PAGING=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y +# CONFIG_INFINIBAND_MTHCA is not set +# CONFIG_INFINIBAND_QIB is not set +CONFIG_INFINIBAND_CXGB4=m +CONFIG_INFINIBAND_I40IW=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +# CONFIG_INFINIBAND_NES is not set +# CONFIG_INFINIBAND_OCRDMA is not set +CONFIG_INFINIBAND_VMWARE_PVRDMA=m +CONFIG_INFINIBAND_USNIC=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_INFINIBAND_OPA_VNIC=m +CONFIG_INFINIBAND_RDMAVT=m +CONFIG_RDMA_RXE=m +CONFIG_INFINIBAND_HFI1=m +# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set +# CONFIG_SDMA_VERBOSITY is not set +CONFIG_INFINIBAND_QEDR=m +CONFIG_INFINIBAND_BNXT_RE=m +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=m +CONFIG_EDAC_GHES=y +CONFIG_EDAC_AMD64=m +# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set +CONFIG_EDAC_E752X=m +CONFIG_EDAC_I82975X=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I3200=m +CONFIG_EDAC_IE31200=m +CONFIG_EDAC_X38=m +CONFIG_EDAC_I5400=m +CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I5000=m +CONFIG_EDAC_I5100=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_SBRIDGE=m +CONFIG_EDAC_SKX=m +CONFIG_EDAC_PND2=m +CONFIG_RTC_LIB=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_SYSTOHC is not set +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1307_CENTURY is not set +CONFIG_RTC_DRV_DS1374=m +# CONFIG_RTC_DRV_DS1374_WDT is not set +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8523=m +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_FM3130=m +# CONFIG_RTC_DRV_RX8010 is not set +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +# CONFIG_RTC_DRV_RV8803 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RX4581=m +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_DS3232_HWMON=y +# CONFIG_RTC_DRV_PCF2127 is not set +CONFIG_RTC_DRV_RV3029C2=m +# CONFIG_RTC_DRV_RV3029_HWMON is not set + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_STK17TA8=m +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_FTRTC010 is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +# CONFIG_ALTERA_MSGDMA is not set +CONFIG_INTEL_IDMA64=m +CONFIG_INTEL_IOATDMA=m +# CONFIG_QCOM_HIDMA_MGMT is not set +# CONFIG_QCOM_HIDMA is not set +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=m +CONFIG_DW_DMAC_PCI=y +CONFIG_HSU_DMA=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +CONFIG_DCA=m +# CONFIG_AUXDISPLAY is not set +# CONFIG_PANEL is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_DMEM_GENIRQ is not set +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +# CONFIG_UIO_NETX is not set +# CONFIG_UIO_PRUSS is not set +# CONFIG_UIO_MF624 is not set +CONFIG_UIO_HV_GENERIC=m +CONFIG_VFIO_IOMMU_TYPE1=m +CONFIG_VFIO_VIRQFD=m +CONFIG_VFIO=m +CONFIG_VFIO_NOIOMMU=y +CONFIG_VFIO_PCI=m +# CONFIG_VFIO_PCI_VGA is not set +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PCI_IGD is not set +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m +CONFIG_IRQ_BYPASS_MANAGER=m +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_MENU=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_HYPERV=m +CONFIG_HYPERV_TSCPAGE=y +CONFIG_HYPERV_UTILS=m +CONFIG_HYPERV_BALLOON=m + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +# CONFIG_XEN_SELFBALLOONING is not set +# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_TMEM=m +# CONFIG_XEN_PVCALLS_FRONTEND is not set +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +CONFIG_XEN_ACPI=y +# CONFIG_STAGING is not set +CONFIG_X86_PLATFORM_DEVICES=y +CONFIG_ACER_WMI=m +# CONFIG_ACER_WIRELESS is not set +CONFIG_ACERHDF=m +# CONFIG_ALIENWARE_WMI is not set +CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_SMBIOS=m +CONFIG_DELL_SMBIOS_WMI=y +# CONFIG_DELL_SMBIOS_SMM is not set +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m +CONFIG_DELL_WMI_DESCRIPTOR=m +CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_WMI_LED=m +CONFIG_DELL_SMO8800=m +CONFIG_DELL_RBTN=m +CONFIG_FUJITSU_LAPTOP=m +CONFIG_FUJITSU_TABLET=m +CONFIG_AMILO_RFKILL=m +# CONFIG_GPD_POCKET_FAN is not set +CONFIG_HP_ACCEL=m +CONFIG_HP_WIRELESS=m +CONFIG_HP_WMI=m +CONFIG_MSI_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_IDEAPAD_LAPTOP=m +# CONFIG_SURFACE3_WMI is not set +CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y +# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set +# CONFIG_THINKPAD_ACPI_DEBUG is not set +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set +CONFIG_THINKPAD_ACPI_VIDEO=y +CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y +CONFIG_SENSORS_HDAPS=m +# CONFIG_INTEL_MENLOW is not set +CONFIG_EEEPC_LAPTOP=m +CONFIG_ASUS_WMI=m +CONFIG_ASUS_NB_WMI=m +CONFIG_EEEPC_WMI=m +# CONFIG_ASUS_WIRELESS is not set +CONFIG_ACPI_WMI=m +CONFIG_WMI_BMOF=m +CONFIG_INTEL_WMI_THUNDERBOLT=m +CONFIG_MSI_WMI=m +# CONFIG_PEAQ_WMI is not set +CONFIG_TOPSTAR_LAPTOP=m +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_TOSHIBA_BT_RFKILL=m +# CONFIG_TOSHIBA_HAPS is not set +# CONFIG_TOSHIBA_WMI is not set +CONFIG_ACPI_CMPC=m +# CONFIG_INTEL_INT0002_VGPIO is not set +CONFIG_INTEL_HID_EVENT=m +CONFIG_INTEL_VBTN=m +CONFIG_INTEL_IPS=m +CONFIG_INTEL_PMC_CORE=m +# CONFIG_IBM_RTL is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_MXM_WMI=m +CONFIG_INTEL_OAKTRAIL=m +CONFIG_SAMSUNG_Q10=m +CONFIG_APPLE_GMUX=m +CONFIG_INTEL_RST=m +# CONFIG_INTEL_SMARTCONNECT is not set +CONFIG_PVPANIC=y +# CONFIG_INTEL_PMC_IPC is not set +# CONFIG_SURFACE_PRO3_BUTTON is not set +# CONFIG_INTEL_PUNIT_IPC is not set +CONFIG_MLX_PLATFORM=m +CONFIG_INTEL_TURBO_MAX_3=y +# CONFIG_I2C_MULTI_INSTANTIATE is not set +# CONFIG_INTEL_ATOMISP2_PM is not set +CONFIG_PMC_ATOM=y +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_MELLANOX_PLATFORM=y +CONFIG_MLXREG_HOTPLUG=m +# CONFIG_MLXREG_IO is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CS2000_CP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_HWSPINLOCK=y + +# +# Clock Source drivers +# +CONFIG_CLKEVT_I8253=y +CONFIG_I8253_LOCK=y +CONFIG_CLKBLD_I8253=y +CONFIG_MAILBOX=y +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# + +# +# Generic PASID table support +# +# CONFIG_IOMMU_DEBUGFS is not set +CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y +CONFIG_IOMMU_IOVA=y +CONFIG_AMD_IOMMU=y +CONFIG_AMD_IOMMU_V2=m +CONFIG_DMAR_TABLE=y +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_SVM is not set +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_IRQ_REMAP=y +# CONFIG_SMMU_BYPASS_DEV is not set + +# +# Remoteproc drivers +# +# CONFIG_REMOTEPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +# CONFIG_RPMSG_VIRTIO is not set +# CONFIG_SOUNDWIRE is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Amlogic SoC drivers +# + +# +# Broadcom SoC drivers +# + +# +# NXP/Freescale QorIQ SoC drivers +# + +# +# i.MX SoC drivers +# + +# +# Qualcomm SoC drivers +# +# CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +CONFIG_SOC_HISILICON_LBC=m +CONFIG_SOC_HISILICON_SYSCTL=m +# CONFIG_PM_DEVFREQ is not set +# CONFIG_EXTCON is not set +# CONFIG_MEMORY is not set +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +CONFIG_HID_SENSOR_ACCEL_3D=m +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_SCA3000 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_HI8435 is not set +# CONFIG_HX711 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2497 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX9611 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_NAU7802 is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_VIPERBOARD_ADC is not set + +# +# Analog Front Ends +# + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Counters +# + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_LTC2632 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_DS4424 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +CONFIG_HID_SENSOR_GYRO_3D=m +# CONFIG_MPU3050_I2C is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +CONFIG_HID_SENSOR_HUMIDITY=m +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_ISL29125 is not set +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Multiplexers +# + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set + +# +# Digital potentiometers +# +# CONFIG_AD5272 is not set +# CONFIG_DS1803 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Digital potentiostats +# +# CONFIG_LMP91000 is not set + +# +# Pressure sensors +# +# CONFIG_ABP060MG is not set +# CONFIG_BMP280 is not set +CONFIG_HID_SENSOR_PRESS=m +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity and distance sensors +# +# CONFIG_ISL29501 is not set +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +# CONFIG_SX9500 is not set +# CONFIG_SRF08 is not set + +# +# Resolver to digital converters +# +# CONFIG_AD2S1200 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +CONFIG_HID_SENSOR_TEMP=m +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +CONFIG_NTB=m +# CONFIG_NTB_AMD is not set +# CONFIG_NTB_IDT is not set +# CONFIG_NTB_INTEL is not set +# CONFIG_NTB_SWITCHTEC is not set +# CONFIG_NTB_PINGPONG is not set +# CONFIG_NTB_TOOL is not set +# CONFIG_NTB_PERF is not set +# CONFIG_NTB_TRANSPORT is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_PWM_LPSS=m +CONFIG_PWM_LPSS_PCI=m +CONFIG_PWM_LPSS_PLATFORM=m +# CONFIG_PWM_PCA9685 is not set + +# +# IRQ chip support +# +CONFIG_ARM_GIC_MAX_NR=1 +# CONFIG_IPACK_BUS is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +# CONFIG_GENERIC_PHY is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_CPCAP_USB is not set +CONFIG_POWERCAP=y +CONFIG_INTEL_RAPL=m +# CONFIG_IDLE_INJECT is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_RAS=y +# CONFIG_RAS_CEC is not set +CONFIG_THUNDERBOLT=y + +# +# Android +# +# CONFIG_ANDROID is not set +CONFIG_LIBNVDIMM=m +CONFIG_BLK_DEV_PMEM=m +CONFIG_ND_BLK=m +CONFIG_ND_CLAIM=y +CONFIG_ND_BTT=m +CONFIG_BTT=y +CONFIG_ND_PFN=m +CONFIG_NVDIMM_PFN=y +CONFIG_NVDIMM_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_DAX=y +CONFIG_DEV_DAX=m +CONFIG_DEV_DAX_PMEM=m +CONFIG_NVMEM=y + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# CONFIG_FPGA is not set +# CONFIG_UNISYS_VISORBUS is not set +# CONFIG_SIOX is not set +# CONFIG_UACCE is not set +# CONFIG_SLIMBUS is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_FS_IOMAP=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_USE_FOR_EXT2=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_ONLINE_SCRUB is not set +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_FS_DAX=y +CONFIG_FS_DAX_PMD=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_EXPORTFS_BLOCK_OPS=y +CONFIG_FILE_LOCKING=y +# CONFIG_MANDATORY_FILE_LOCKING is not set +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_QUOTACTL_COMPAT=y +CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_FAT_DEFAULT_UTF8 is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +CONFIG_PROC_VMCORE_DEVICE_DUMP=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_CHILDREN=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_CRAMFS_MTD is not set +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_FILE_CACHE is not set +CONFIG_SQUASHFS_FILE_DIRECT=y +# CONFIG_SQUASHFS_DECOMP_SINGLE is not set +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_FTRACE is not set +CONFIG_PSTORE_RAM=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +# CONFIG_NFS_V2 is not set +CONFIG_NFS_V3=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y +# CONFIG_NFSD_BLOCKLAYOUT is not set +CONFIG_NFSD_SCSILAYOUT=y +# CONFIG_NFSD_FLEXFILELAYOUT is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=m +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_CEPH_FS=m +# CONFIG_CEPH_FSCACHE is not set +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set +CONFIG_CIFS_DFS_UPCALL=y +# CONFIG_CIFS_SMB_DIRECT is not set +# CONFIG_CIFS_FSCACHE is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_TRUSTED_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_WRITABLE_HOOKS=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_PAGE_TABLE_ISOLATION=y +CONFIG_SECURITY_INFINIBAND=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_INTEL_TXT=y +CONFIG_LSM_MMAP_MIN_ADDR=65535 +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_HARDENED_USERCOPY_FALLBACK=y +CONFIG_FORTIFY_SOURCE=y +# CONFIG_STATIC_USERMODEHELPER is not set +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +CONFIG_SECURITY_YAMA=y +CONFIG_INTEGRITY=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_INTEGRITY_TRUSTED_KEYRING=y +CONFIG_INTEGRITY_AUDIT=y +CONFIG_IMA=y +CONFIG_IMA_MEASURE_PCR_IDX=10 +CONFIG_IMA_LSM_RULES=y +# CONFIG_IMA_TEMPLATE is not set +CONFIG_IMA_NG_TEMPLATE=y +# CONFIG_IMA_SIG_TEMPLATE is not set +CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" +CONFIG_IMA_DEFAULT_HASH_SHA1=y +# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set +CONFIG_IMA_DEFAULT_HASH="sha1" +# CONFIG_IMA_WRITE_POLICY is not set +# CONFIG_IMA_READ_POLICY is not set +CONFIG_IMA_APPRAISE=y +# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set +CONFIG_IMA_APPRAISE_BOOTPARAM=y +CONFIG_IMA_TRUSTED_KEYRING=y +# CONFIG_IMA_BLACKLIST_KEYRING is not set +# CONFIG_IMA_LOAD_X509 is not set +CONFIG_EVM=y +CONFIG_EVM_ATTR_FSUUID=y +# CONFIG_EVM_ADD_XATTRS is not set +# CONFIG_EVM_LOAD_X509 is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_RSA=y +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_GLUE_HELPER_X86=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=m +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_AEGIS128L is not set +# CONFIG_CRYPTO_AEGIS256 is not set +# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set +# CONFIG_CRYPTO_MORUS640 is not set +# CONFIG_CRYPTO_MORUS640_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280 is not set +# CONFIG_CRYPTO_MORUS1280_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280_AVX2 is not set +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_ECHAINIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CFB=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRC32_PCLMUL=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_POLY1305=m +CONFIG_CRYPTO_POLY1305_X86_64=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_SSSE3=y +CONFIG_CRYPTO_SHA256_SSSE3=y +CONFIG_CRYPTO_SHA512_SSSE3=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +# CONFIG_CRYPTO_SM3 is not set +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_BLOWFISH_X86_64=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAMELLIA_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST5_AVX_X86_64=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_CAST6_AVX_X86_64=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES3_EDE_X86_64=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_CHACHA20=m +CONFIG_CRYPTO_CHACHA20_X86_64=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m +# CONFIG_CRYPTO_SM4 is not set +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_TWOFISH_X86_64=m +CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m +CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_HASH=y +CONFIG_CRYPTO_DRBG_CTR=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_USER_API=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=y +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +CONFIG_CRYPTO_DEV_CCP=y +CONFIG_CRYPTO_DEV_CCP_DD=m +CONFIG_CRYPTO_DEV_SP_CCP=y +CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +CONFIG_CRYPTO_DEV_SP_PSP=y +CONFIG_CRYPTO_DEV_QAT=m +CONFIG_CRYPTO_DEV_QAT_DH895xCC=m +CONFIG_CRYPTO_DEV_QAT_C3XXX=m +CONFIG_CRYPTO_DEV_QAT_C62X=m +CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m +CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m +CONFIG_CRYPTO_DEV_QAT_C62XVF=m +CONFIG_CRYPTO_DEV_NITROX=m +CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m +CONFIG_CRYPTO_DEV_CHELSIO=m +CONFIG_CHELSIO_IPSEC_INLINE=y +# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set +# CONFIG_CRYPTO_DEV_VIRTIO is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +CONFIG_SIGNED_PE_FILE_VERIFICATION=y + +# +# Certificates for signature checking +# +CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +CONFIG_SYSTEM_BLACKLIST_KEYRING=y +CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC4 is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +CONFIG_XXHASH=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_ENC8=y +CONFIG_REED_SOLOMON_DEC8=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_VIRT_OPS=y +CONFIG_SWIOTLB=y +CONFIG_SGL_ALLOC=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_CPUMASK_OFFSTACK=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_CORDIC=m +# CONFIG_DDR is not set +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_SIGNATURE=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_ARCH_HAS_UACCESS_MCSAFE=y +CONFIG_SBITMAP=y +CONFIG_PARMAN=m +# CONFIG_STRING_SELFTEST is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_STACK_VALIDATION=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_DEBUG_SHIRQ=y + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_ON_OOPS_VALUE=1 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_INFO=y +CONFIG_SCHEDSTATS=y +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +CONFIG_STACKTRACE=y +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +CONFIG_FUNCTION_ERROR_INJECTION=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_FENTRY=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_PREEMPTIRQ_EVENTS is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_HWLAT_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENTS=y +# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set +CONFIG_UPROBE_EVENTS=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_FUNCTION_PROFILER=y +# CONFIG_BPF_KPROBE_OVERRIDE is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_TRACING_MAP=y +CONFIG_HIST_TRIGGERS=y +# CONFIG_TRACEPOINT_BENCHMARK is not set +CONFIG_RING_BUFFER_BENCHMARK=m +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_TRACE_EVAL_MAP_FILE is not set +# CONFIG_TRACING_EVENTS_GPIO is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_DMA_API_DEBUG is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +CONFIG_TEST_KSTRTOX=y +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_PARMAN is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_MEMTEST is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +CONFIG_KGDB_TESTS=y +# CONFIG_KGDB_TESTS_ON_BOOT is not set +CONFIG_KGDB_LOW_LEVEL_TRAP=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x0 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_EARLY_PRINTK_USB=y +# CONFIG_X86_VERBOSE_BOOTUP is not set +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_DBGP=y +CONFIG_EARLY_PRINTK_EFI=y +CONFIG_EARLY_PRINTK_USB_XDBC=y +# CONFIG_X86_PTDUMP is not set +# CONFIG_EFI_PGT_DUMP is not set +# CONFIG_DEBUG_WX is not set +CONFIG_DOUBLEFAULT=y +# CONFIG_DEBUG_TLBFLUSH is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_X86_DECODER_SELFTEST=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_ENTRY is not set +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_X86_DEBUG_FPU is not set +# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNWINDER_ORC=y +# CONFIG_UNWINDER_FRAME_POINTER is not set -- 1.8.3

1 0

[PATCH] files_cgroup: Fix soft lockup when refcnt overflow.
by Yang Yingliang 26 Feb '20

26 Feb '20

From: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31087 DTS: DTS2020022609725 CVE: NA --------------------- There is a soft lockup call trace as below: CPU: 0 PID: 1360 Comm: imapsvcd Kdump: loaded Tainted: G OE task: ffff8a7296e1eeb0 ti: ffff8a7296aa0000 task.ti: ffff8a7296aa0000 RIP: 0010:[<ffffffffb691ecb4>] [<ffffffffb691ecb4>] __css_tryget+0x24/0x50 RSP: 0018:ffff8a7296aa3db8 EFLAGS: 00000a87 RAX: 0000000080000000 RBX: ffff8a7296aa3df8 RCX: ffff8a72820d9a08 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8a72820d9a00 RBP: ffff8a7296aa3db8 R08: 000000000001c360 R09: ffffffffb6a478f4 R10: ffffffffb6935e83 R11: ffffffffffffffd0 R12: 0000000057d35cd8 R13: 000000d000000002 R14: ffffffffb6892fbe R15: 000000d000000002 FS: 0000000000000000(0000) GS:ffff8a72fec00000(0063) knlGS:00000000c6e65b40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057d35cd8 CR3: 00000007e8008000 CR4: 00000000003607f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffb6a93578>] files_cgroup_assign+0x48/0x60 [<ffffffffb6a47972>] dup_fd+0xb2/0x2f0 [<ffffffffb6935e83>] ? audit_alloc+0xe3/0x180 [<ffffffffb6893a03>] copy_process+0xbd3/0x1a40 [<ffffffffb6894a21>] do_fork+0x91/0x320 [<ffffffffb6f329e6>] ? trace_do_page_fault+0x56/0x150 [<ffffffffb6894d36>] SyS_clone+0x16/0x20 [<ffffffffb6f3bf8c>] ia32_ptregs_common+0x4c/0xfc code: 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8d 4f 08 48 89 e5 8b 47 08 8d 90 00 00 00 80 85 c0 0f 49 d0 8d 72 01 89 d0 f0 0f b1 When the child process exit, we doesn't call dec refcnt, so, the refcnt maybe overflow. Then the 'task_get_css' will dead loop because the 'css_refcnt' will return an unbias refcnt, if the refcnt is negitave, '__css_tryget' always return false, then 'task_get_css' dead looped. The child process always call 'close_files' when exit, add dec refcnt in it. Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/file.c b/fs/file.c index 6b9ad66..5b191c3 100644 --- a/fs/file.c +++ b/fs/file.c @@ -423,6 +423,9 @@ static struct fdtable *close_files(struct files_struct * files) set >>= 1; } } +#ifdef CONFIG_CGROUP_FILES + files_cgroup_remove(files); +#endif return fdt; } -- 1.8.3

1 0