- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 v2 00/11] net dynamic tghreaded module
by Cai Xinchen 19 Oct '26

19 Oct '26

This series adds net/dynthread, a loadable module that adapts the NAPI processing and the RX queue IRQ placement of a set of net devices to the scheduling behaviour of a target application at runtime. Motivation ---------- Interrupt and softirq processing of network RX competes with latency sensitive applications (e.g. mysqld) for CPU time. When such an application runs for a long time on a CPU without blocking, the softirq work of the NIC completion queues can preempt it on the same CPU and inflate its tail latency. The usual remedies are to steer the RX queue IRQs to other CPUs and/or to move NAPI processing into kernel threads bound to spare CPUs, but a static configuration cannot follow the application: once the target goes idle, is scheduled in short bursts, or is displaced, the reserved CPUs are simply wasted. Approach -------- The module periodically samples the scheduling statistics of all threads matching the appname module parameter and classifies them into one of five statuses (DATA_LOSS, NO_TASK, NOT_RUNNING, FRAGMENTATION, LONG_RUNNING_WITH_INTERRUPTS). Acting on that status it: - restores the RX queue IRQs to their original affinity when the target is gone or barely running; - spreads the IRQs over the NUMA node of their queues when processing in softirq context is acceptable again; - switches the NAPI processing of the configured net devices to kernel threads and binds the NAPI threads (and, optionally, the queue IRQs) to the CPUs of their NUMA node that the target tasks are not allowed to use; - scales the number of CPUs used by those threads with their measured load while the target stays in the long-running status. An unusable sample (counters moved backwards: DATA_LOSS) keeps the previous status, so a single bad sample cannot toggle the mode. Everything is controlled through module parameters, and the original IRQ affinity and NAPI mode are restored when the target disappears, the scheduler is disabled or the module is unloaded. The module is buildable only as a loadable module; the Kconfig entry currently allows ARM64. Patch breakdown --------------- 1/6 net: dynthread: Add dynamic threaded NAPI scheduler framework Wire the new directory into net/Kconfig and net/Makefile, add the NET_DYNTHREAD Kconfig entry and the module skeleton. On load the module takes a reference on each device given with the '#' separated ifname parameter, walks the IRQ descriptor table through the exported irq_get_irq_data(), snapshots desc->action and the effective affinity under desc->lock, and records the IRQ number and the original affinity CPU of every RX queue. IRQs are matched against the device name, its parent device name and the irqname pattern. Also count the NUMA nodes the recorded queues span, drop the device references on unload, and unwind a partially failed init. 2/6 net: dynthread: Monitor the load of the target tasks Add the sampling loop and the status judgement. Every monitored thread whose name matches appname contributes its runtime, voluntary/involuntary context switches and its allowed CPU mask; the masks are unioned to know where the target may run. The sample is compared with the previous one to derive the average runtime per switch, the nvcsw percentage and the CPU load, and to classify it as DATA_LOSS, NO_TASK, NOT_RUNNING, FRAGMENTATION or LONG_RUNNING_WITH_INTERRUPTS. Add the periodic hrtimer/work worker, the dynthreaded enable/disable parameter, a mutex serializing the worker control, a zeroed baseline on every enable, and the last_status tracking used to carry the transition sample. 3/6 net: dynthread: Steer the RX queue IRQs away from the target tasks Manage the affinity of the recorded RX queue IRQs. When the target tasks sit in a single NUMA node and enough CPUs of that node are free, move all queue IRQs there round-robin; when the target is gone or barely running, restore the affinity recorded at load time; when the target is fragmented, spread the IRQs over a subset of their own NUMA node sized from dyn_threaded_irq_cpucore_per. Track the "bound to one node" state so spreading is suppressed while it is active, and clear it on every recovery. All of this is skipped when dyn_threaded_bindirq is off, and the IRQ affinity is restored when the worker is stopped. 4/6 net: dynthread: Switch NAPI to threads on spare CPUs Enable threaded NAPI (dev_set_threaded) on the monitored devices in LONG_RUNNING_WITH_INTERRUPTS and bind each NAPI thread from the NUMA node of its queue IRQ: use the whole node if the target is not there, the target-free CPUs of the node if any, otherwise the first dyn_threaded_corenum CPUs of the node. Optionally bind the queue IRQ to the same mask. Record the CPUs used by the NAPI threads in napi_cpumask for the load evaluation of the next patch. Switch the devices back to softirq mode in NO_TASK, NOT_RUNNING and FRAGMENTATION, when the scheduler is disabled and on module unload; the NAPI and IRQ operations run under the rtnetlink lock. 5/6 net: dynthread: Scale the number of NAPI thread CPUs Sample the kernel_cpustat of the CPUs used by the NAPI threads and compare consecutive periods. Grow dyn_threaded_corenum when the irq/softirq share or the total load of those CPUs is too high, and shrink it when the user share is high or the total load is low, within the lower/upper limit parameters. Damping and anti-fight rules avoid oscillating right after a change or undoing a change made for the opposite reason. The default core count is computed at init from the busiest device's RX queue count divided by the online NUMA nodes and clamped to the limits. Reset the damping state when leaving the long-running status. 6/6 net: dynthread: Add debug switch and instrumentation Add the dyn_threaded_debug module parameter and instrument the periodic sampling, the status transitions, the IRQ affinity decisions, the NAPI thread masks and the CPU-count resizes. The messages are recorded with trace_printk() so they can be read from tracefs without flooding the console; without tracing support they fall back to dynamic debug. The switch is off by default. Amritha Nambiar (2): net: Add queue and napi association net: Add NAPI IRQ support Cai Xinchen (6): net: dynthread: Add dynamic threaded NAPI scheduler framework net: dynthread: Monitor the load of the target tasks net: dynthread: Steer the RX queue IRQs away from the target tasks net: dynthread: Switch NAPI to threads on spare CPUs net: dynthread: Scale the number of NAPI thread CPUs net: dynthread: Add debug switch and instrumentation Carolina Jubran (1): net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation Cosmin Ratiu (1): net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover Joe Damato (1): net/mlx5e: link NAPI instances to queues and IRQs .../net/ethernet/mellanox/mlx5/core/en/ptp.c | 5 +- .../mellanox/mlx5/core/en/reporter_tx.c | 5 + .../net/ethernet/mellanox/mlx5/core/en_main.c | 7 + include/linux/netdevice.h | 21 +- include/net/netdev_rx_queue.h | 2 +- net/Kconfig | 1 + net/Makefile | 1 + net/core/dev.c | 38 + net/dynthread/Kconfig | 13 + net/dynthread/Makefile | 2 + net/dynthread/net_dynthread.c | 1316 +++++++++++++++++ 11 files changed, 1407 insertions(+), 4 deletions(-) create mode 100644 net/dynthread/Kconfig create mode 100644 net/dynthread/Makefile create mode 100644 net/dynthread/net_dynthread.c -- 2.18.0.huawei.25

2 13

[PATCH OLK-6.6 0/3] some fixes to xSched
by Tang Hui 19 Oct '26

19 Oct '26

Zicheng Qu (3): xsched: fix use-after-free in vstream lookup by user stream id xsched: add debug log for picked entity xsched: make vstream_hbm_free tolerate a missing context kernel/xsched/core.c | 2 ++ kernel/xsched/vstream.c | 31 +++++++++++++++++++------------ 2 files changed, 21 insertions(+), 12 deletions(-) -- 2.34.1

2 4

[PATCH v2 OLK-6.6 0/2] CVE-2026-89642
by Cai Xinchen 19 Oct '26

19 Oct '26

Fix CVE-2026-89642 Frank Sorenson (1): cifs: call pagecache_isize_extended() in cifs_setsize() when extending Zizhi Wo (1): smb: client: clear post-EOF pagecache when extending a file via truncate fs/smb/client/cifsfs.h | 2 +- fs/smb/client/inode.c | 74 +++++++++++++++++++++++++++++++++++++++-- fs/smb/client/smb2ops.c | 14 +++++--- 3 files changed, 83 insertions(+), 7 deletions(-) -- 2.18.0.huawei.25

2 3

[PATCH OLK-6.6 0/2] CVE-2026-89642
by Cai Xinchen 19 Oct '26

19 Oct '26

Fix CVE-2026-89642 Frank Sorenson (1): cifs: call pagecache_isize_extended() in cifs_setsize() when extending Zizhi Wo (1): smb: client: clear post-EOF pagecache when extending a file via truncate fs/smb/client/cifsfs.h | 2 +- fs/smb/client/inode.c | 70 +++++++++++++++++++++++++++++++++++++++-- fs/smb/client/smb2ops.c | 14 ++++++--- 3 files changed, 79 insertions(+), 7 deletions(-) -- 2.18.0.huawei.25

2 3

[PATCH OLK-6.6 0/3] Fix perf sigtrap
by Luo Gengkun 17 Oct '26

17 Oct '26

Luo Gengkun (1): perf: Fix kabi breakage of struct perf_event Sebastian Andrzej Siewior (2): perf: Move irq_work_queue() where the event is prepared. perf: Enqueue SIGTRAP always via task_work. include/linux/perf_event.h | 4 ++-- kernel/events/core.c | 41 ++++++++++++++------------------------ 2 files changed, 17 insertions(+), 28 deletions(-) -- 2.34.1

2 4

[PATCH OLK-6.6 0/3] Fix perf sigtrap
by Luo Gengkun 17 Oct '26

17 Oct '26

Luo Gengkun (1): perf: Fix kabi breakage of struct perf_event Sebastian Andrzej Siewior (2): perf: Move irq_work_queue() where the event is prepared. perf: Enqueue SIGTRAP always via task_work. include/linux/perf_event.h | 4 ++-- kernel/events/core.c | 41 ++++++++++++++------------------------ 2 files changed, 17 insertions(+), 28 deletions(-) -- 2.34.1

1 0

[PATCH OLK-6.6 1/3] perf: Move irq_work_queue() where the event is prepared.
by Luo Gengkun 17 Oct '26

17 Oct '26

From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> mainline inclusion from mainline-v6.11-rc1 commit 058244c683111d44a5de16ac74f19a1754dd7a0c category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/20234 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ---------------------------------------------------------------------- Only if perf_event::pending_sigtrap is zero, the irq_work accounted by increminging perf_event::nr_pending. The member perf_event::pending_addr might be overwritten by a subsequent event if the signal was not yet delivered and is expected. The irq_work will not be enqeueued again because it has a check to be only enqueued once. Move irq_work_queue() to where the counter is incremented and perf_event::pending_sigtrap is set to make it more obvious that the irq_work is scheduled once. Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Tested-by: Marco Elver <elver(a)google.com> Tested-by: Arnaldo Carvalho de Melo <acme(a)redhat.com> Link: https://lore.kernel.org/r/20240704170424.1466941-2-bigeasy@linutronix.de Signed-off-by: Luo Gengkun <luogengkun2(a)huawei.com> --- kernel/events/core.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 8ebd91f8df52..6e78b7af0062 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -9729,6 +9729,11 @@ static int __perf_event_overflow(struct perf_event *event, if (!event->pending_sigtrap) { event->pending_sigtrap = pending_id; local_inc(&event->ctx->nr_pending); + + event->pending_addr = 0; + if (valid_sample && (data->sample_flags & PERF_SAMPLE_ADDR)) + event->pending_addr = data->addr; + irq_work_queue(&event->pending_irq); } else if (event->attr.exclude_kernel && valid_sample) { /* * Should not be able to return to user space without @@ -9744,11 +9749,6 @@ static int __perf_event_overflow(struct perf_event *event, */ WARN_ON_ONCE(event->pending_sigtrap != pending_id); } - - event->pending_addr = 0; - if (valid_sample && (data->sample_flags & PERF_SAMPLE_ADDR)) - event->pending_addr = data->addr; - irq_work_queue(&event->pending_irq); } READ_ONCE(event->overflow_handler)(event, data, regs); -- 2.34.1

1 0

[PATCH OLK-6.6 0/3] Fix perf sigtrap
by Luo Gengkun 17 Oct '26

17 Oct '26

Luo Gengkun (1): perf: Fix kabi breakage of struct perf_event Sebastian Andrzej Siewior (2): perf: Move irq_work_queue() where the event is prepared. perf: Enqueue SIGTRAP always via task_work. include/linux/perf_event.h | 4 ++-- kernel/events/core.c | 41 ++++++++++++++------------------------ 2 files changed, 17 insertions(+), 28 deletions(-) -- 2.34.1

2 4

[PATCH OLK-6.6] ALSA: usb-audio: caiaq: validate EP1 reply lengths
by Pan Taixi 16 Oct '26

16 Oct '26

From: Pengpeng Hou <pengpeng(a)iscas.ac.cn> stable inclusion from stable-v6.6.158 commit 319393151367e6626affedcdd4f7b7b0286f4246 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19607 CVE: CVE-2026-93808 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit aba30af07d4fe499b50209801eba9da8a815522f ] usb_ep1_command_reply_dispatch() uses buf[0] as a command byte and then reads command-specific fixed items from the same URB buffer. Several paths use buf + 1, buf[1], buf[2], or buf + 3 without first proving that urb->actual_length contains those bytes. Add per-command length checks, use a payload length derived from the bytes after the command byte for the control-state copy, and reject short analog input payloads before the input helper reads fixed offsets from the EP1 reply. Signed-off-by: Pengpeng Hou <pengpeng(a)iscas.ac.cn> Link: https://patch.msgid.link/20260705084601.56400-1-pengpeng@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Pan Taixi <pantaixi1(a)huawei.com> --- sound/usb/caiaq/device.c | 17 ++++++++++++++--- sound/usb/caiaq/input.c | 6 ++++++ 2 files changed, 20 insertions(+), 3 deletions(-) diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c index 35e969086d6c..3d821fde4582 100644 --- a/sound/usb/caiaq/device.c +++ b/sound/usb/caiaq/device.c @@ -132,18 +132,26 @@ static void usb_ep1_command_reply_dispatch (struct urb* urb) { int ret; struct device *dev = &urb->dev->dev; struct snd_usb_caiaqdev *cdev = urb->context; unsigned char *buf = urb->transfer_buffer; + unsigned int payload_len; + unsigned int copy_len; if (urb->status || !cdev) { dev_warn(dev, "received EP1 urb->status = %i\n", urb->status); return; } + if (urb->actual_length < 1) + return; + + payload_len = urb->actual_length - 1; switch(buf[0]) { case EP1_CMD_GET_DEVICE_INFO: + if (payload_len < sizeof(struct caiaq_device_spec)) + break; memcpy(&cdev->spec, buf+1, sizeof(struct caiaq_device_spec)); cdev->spec.fw_version = le16_to_cpu(cdev->spec.fw_version); dev_dbg(dev, "device spec (firmware %d): audio: %d in, %d out, " "MIDI: %d in, %d out, data alignment %d\n", cdev->spec.fw_version, @@ -155,22 +163,25 @@ static void usb_ep1_command_reply_dispatch (struct urb* urb) cdev->spec_received++; wake_up(&cdev->ep1_wait_queue); break; case EP1_CMD_AUDIO_PARAMS: + if (payload_len < 1) + break; cdev->audio_parm_answer = buf[1]; wake_up(&cdev->ep1_wait_queue); break; case EP1_CMD_MIDI_READ: + if (urb->actual_length < 3 || urb->actual_length - 3 < buf[2]) + break; snd_usb_caiaq_midi_handle_input(cdev, buf[1], buf + 3, buf[2]); break; case EP1_CMD_READ_IO: if (cdev->chip.usb_id == USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ)) { - if (urb->actual_length > sizeof(cdev->control_state)) - urb->actual_length = sizeof(cdev->control_state); - memcpy(cdev->control_state, buf + 1, urb->actual_length); + copy_len = min_t(unsigned int, payload_len, sizeof(cdev->control_state)); + memcpy(cdev->control_state, buf + 1, copy_len); wake_up(&cdev->ep1_wait_queue); break; } #ifdef CONFIG_SND_USB_CAIAQ_INPUT fallthrough; diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c index 2db4d1332df1..c12eeb971000 100644 --- a/sound/usb/caiaq/input.c +++ b/sound/usb/caiaq/input.c @@ -201,22 +201,28 @@ static void snd_caiaq_input_read_analog(struct snd_usb_caiaqdev *cdev, { struct input_dev *input_dev = cdev->input_dev; switch (cdev->chip.usb_id) { case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL2): + if (len < 6) + return; snd_caiaq_input_report_abs(cdev, ABS_X, buf, 2); snd_caiaq_input_report_abs(cdev, ABS_Y, buf, 0); snd_caiaq_input_report_abs(cdev, ABS_Z, buf, 1); break; case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_RIGKONTROL3): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER): case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_KORECONTROLLER2): + if (len < 6) + return; snd_caiaq_input_report_abs(cdev, ABS_X, buf, 0); snd_caiaq_input_report_abs(cdev, ABS_Y, buf, 1); snd_caiaq_input_report_abs(cdev, ABS_Z, buf, 2); break; case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_TRAKTORKONTROLX1): + if (len < 16) + return; snd_caiaq_input_report_abs(cdev, ABS_HAT0X, buf, 4); snd_caiaq_input_report_abs(cdev, ABS_HAT0Y, buf, 2); snd_caiaq_input_report_abs(cdev, ABS_HAT1X, buf, 6); snd_caiaq_input_report_abs(cdev, ABS_HAT1Y, buf, 1); snd_caiaq_input_report_abs(cdev, ABS_HAT2X, buf, 7); -- 2.34.1

2 1

[PATCH OLK-5.10 v3 0/2] Fix KASAN: slab-use-after-free Read in r1buf_pool_alloc
by Zhou Minqiang 16 Oct '26

16 Oct '26

Fix KASAN: slab-use-after-free Read in r1buf_pool_alloc Zhou Minqiang (2): md/raid1: change r1conf->r1bio_pool to a pointer type md/raid1: remove struct pool_info and related code drivers/md/raid1.c | 84 +++++++++++++++++----------------------------- drivers/md/raid1.h | 22 +----------- 2 files changed, 31 insertions(+), 75 deletions(-) -- 2.52.0

2 3