- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS 0/1] Fix CVE-2022-49253
by Hongbo Li 05 Mar '25

05 Mar '25

Fix CVE-2022-49253. Dan Carpenter (1): media: usb: go7007: s2250-board: fix leak in probe() drivers/media/usb/go7007/s2250-board.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) -- 2.34.1

2 2

[PATCH OLK-6.6 0/2] Fixes CVE-2025-21767
by Yang Yingliang 05 Mar '25

05 Mar '25

Waiman Long (2): clocksource: Use pr_info() for "Checking clocksource synchronization" message clocksource: Use migrate_disable() to avoid calling get_random_u32() in atomic context kernel/time/clocksource.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) -- 2.25.1

2 3

[PATCH openEuler-1.0-LTS 0/2] Fix CVE-2022-49308
by Hongbo Li 05 Mar '25

05 Mar '25

Fix CVE-2022-49308. Dinghao Liu (1): extcon: Fix error handling in extcon_dev_register bumwoo lee (1): extcon: Modify extcon device to be created after driver data is set drivers/extcon/extcon.c | 28 +++++++++++++++++----------- 1 file changed, 17 insertions(+), 11 deletions(-) -- 2.34.1

2 3

[PATCH openEuler-1.0-LTS 0/1] Fix Fix CVE-2022-49351
by Hongbo Li 05 Mar '25

05 Mar '25

Fix Fix CVE-2022-49351. Miaoqian Lin (1): net: altera: Fix refcount leak in altera_tse_mdio_create drivers/net/ethernet/altera/altera_tse_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) -- 2.34.1

2 2

[PATCH openEuler-25.03 v6 0/4] Add TrIO support in EROFS
by Hongbo Li 05 Mar '25

05 Mar '25

TrIO can accelerate the cold start of containers during on-demand loading. It aggregates the read I/O operations required for container runtime during the first container launch. In the following startups, TrIO pulls the necessary I/O data to the container node in a single large I/O operation and uses this I/O information to construct the runtime rootfs. By improving the efficiency of network I/O, TrIO speeds up container startup in on-demand loading scenarios. TrIO consists of both kernel-space and user-space code. The kernel-space code has been adapted at the overlayfs layer, introducing the CONFIG_EROFS_TRIO configuration to provide isolation. The user-space code requires adaptation by the user, and detailed usage methods are introduced in the tools/trio/README.md section. Patches 1~2 correspond to the kernel adaptations, while patches 3~4 are the scripts and best practices that TrIO relies on for its operation. v6: - Add folio_put after filemap_get_folio. - Filter trace with lowerdir v5: - Adapt to the large folio tracepoint in erofs. - Adapt to the multiple type of page size (4k and 64k). v4: - Avoid the memleak of meta_buf. - Fix some exception handle from reviewer's suggestions. - Use spinlock in kprobe context. v3: - Obtain and keep the trio_object in open. - Only close readahead in trio case. Hongbo Li (4): erofs:trio: Add trio_manager in erofs erofs: trio: Support TrIO feature in erofs TrIO: Add tools for using TrIO TrIO: Add README.md arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/erofs/Kconfig | 11 + fs/erofs/Makefile | 1 + fs/erofs/fscache.c | 22 +- fs/erofs/inode.c | 2 + fs/erofs/internal.h | 56 +++ fs/erofs/super.c | 49 +- fs/erofs/trio_manager.c | 365 +++++++++++++++ tools/trio/README.md | 446 +++++++++++++++++++ tools/trio/bpf/iotracker/Makefile | 99 ++++ tools/trio/bpf/iotracker/iotracker.bpf.c | 52 +++ tools/trio/bpf/iotracker/iotracker.c | 57 +++ tools/trio/bpf/rio_tracker_mod/Makefile | 9 + tools/trio/bpf/rio_tracker_mod/rio_tracker.c | 370 +++++++++++++++ tools/trio/scripts/trace_parser.py | 287 ++++++++++++ 16 files changed, 1825 insertions(+), 3 deletions(-) create mode 100644 fs/erofs/trio_manager.c create mode 100644 tools/trio/README.md create mode 100644 tools/trio/bpf/iotracker/Makefile create mode 100644 tools/trio/bpf/iotracker/iotracker.bpf.c create mode 100644 tools/trio/bpf/iotracker/iotracker.c create mode 100644 tools/trio/bpf/rio_tracker_mod/Makefile create mode 100644 tools/trio/bpf/rio_tracker_mod/rio_tracker.c create mode 100644 tools/trio/scripts/trace_parser.py -- 2.34.1

2 5

[PATCH openEuler-1.0-LTS] can: m_can: m_can_tx_handler(): fix use after free of skb
by Xiangwei Li 05 Mar '25

05 Mar '25

From: Marc Kleine-Budde <mkl(a)pengutronix.de> stable inclusion from stable-v4.19.253 commit 7728d937ec403a1ceff9483023252d2cb8777f81 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBP6AL CVE: CVE-2022-49275 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream. can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch. Fixes: 80646733f11c ("can: m_can: update to support CAN FD features") Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de Cc: stable(a)vger.kernel.org Reported-by: Hangyu Hua <hbh25y(a)gmail.com> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Xiangwei Li <liwei728(a)huawei.com> --- drivers/net/can/m_can/m_can.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/m_can/m_can.c b/drivers/net/can/m_can/m_can.c index deb274a19ba0..3e0084ff3c9c 100644 --- a/drivers/net/can/m_can/m_can.c +++ b/drivers/net/can/m_can/m_can.c @@ -1443,8 +1443,6 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, M_CAN_FIFO_DATA(i / 4), *(u32 *)(cf->data + i)); - can_put_echo_skb(skb, dev, 0); - if (priv->can.ctrlmode & CAN_CTRLMODE_FD) { cccr = m_can_read(priv, M_CAN_CCCR); cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT); @@ -1461,6 +1459,9 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb, m_can_write(priv, M_CAN_CCCR, cccr); } m_can_write(priv, M_CAN_TXBTIE, 0x1); + + can_put_echo_skb(skb, dev, 0); + m_can_write(priv, M_CAN_TXBAR, 0x1); /* End of xmit function for version 3.0.x */ } else { -- 2.25.1

2 1

[openeuler:OLK-5.10] BUILD REGRESSION 2fb29dd60fee873c8d757037e478fa2c03ac8bd3
by kernel test robot 05 Mar '25

05 Mar '25

tree/branch: https://gitee.com/openeuler/kernel.git OLK-5.10 branch HEAD: 2fb29dd60fee873c8d757037e478fa2c03ac8bd3 !15293 ras: ACPI: HED: Always initialize before evged Error/Warning ids grouped by kconfigs: recent_errors |-- arm64-allnoconfig | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- arm64-defconfig | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- arm64-randconfig-002-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- arm64-randconfig-003-20250304 | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- arm64-randconfig-004-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- x86_64-allnoconfig | |-- Warning:arch-x86-kernel-cpu-resctrl-monitor.c-references-a-file-that-doesn-t-exist:Documentation-x86-resctrl.rst | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_base.c:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_base.c:ps3_driver_log.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_base.c:ps3_scsi_cmd_err.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_cli.c:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_driver_log.c:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-linux-ps3_dump.c:linux-uaccess.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_debug.c:ps3_htp_def.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_debug.c:ps3_instance_manager.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager.c:scsi-scsi_tcq.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager.h:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager_sas.h:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_device_update.c:linux-mutex.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_device_update.c:ps3_device_update.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_instance_manager.h:ps3_cmd_channel.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_instance_manager.h:ps3_inner_data.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_instance_manager.h:ps3_irq.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_ioc_adp.c:ps3_scsih.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_ioctl.c:linux-mutex.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_irq.c:linux-kernel.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_mgr_channel.c:ps3_cmd_complete.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_mgr_cmd.c:linux-mutex.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:ps3_driver_log.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_rb_tree.h:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:ps3_ioc_state.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:ps3_recovery.h-is-included-more-than-once. | |-- drivers-scsi-linkdata-ps3stor-ps3_sas_transport.h:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_scsi_cmd_err.c:linux-version.h-not-needed. | |-- drivers-scsi-linkdata-ps3stor-ps3_scsih.c:ps3_module_para.h-is-included-more-than-once. | |-- ld.lld:error:version-script-assignment-of-LINUX_2.-to-symbol-__vdso_sgx_enter_enclave-failed:symbol-not-defined | |-- llvm-objcopy:error:arch-x86-entry-vdso-vdso64.so.dbg:No-such-file-or-directory | |-- llvm-objdump:error:arch-x86-entry-vdso-vdso64.so.dbg:No-such-file-or-directory | |-- mm-page_alloc.c:linux-vmalloc.h-is-included-more-than-once. | |-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__zone_set_pageset_high_and_batch |-- x86_64-allyesconfig | |-- arch-x86-kernel-cpu-resctrl-rdtgroup.c:warning:variable-h-set-but-not-used | |-- arch-x86-kernel-fpu-core.c:warning:no-previous-prototype-for-function-get_fpu_registers_pos | |-- arch-x86-kernel-fpu-core.c:warning:no-previous-prototype-for-function-save_fpregs_to_fpkernelstate | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_base.c:error:no-previous-prototype-for-function-ps3_pci_init-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_base.c:error:no-previous-prototype-for-function-ps3_pci_init_complete-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_base.c:error:no-previous-prototype-for-function-ps3_pci_init_complete_exit-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_cli_debug.c:error:no-previous-prototype-for-function-ps3_dump_context_show-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_dump.c:error:no-previous-prototype-for-function-ps3_dump_file_close-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_dump.c:error:no-previous-prototype-for-function-ps3_dump_file_open-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_dump.c:error:no-previous-prototype-for-function-ps3_dump_file_write-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_dump.c:error:no-previous-prototype-for-function-ps3_dump_filename_build-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-.-linux-ps3_dump.c:error:no-previous-prototype-for-function-ps3_dump_local_time-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_cmd_complete.c:error:no-previous-prototype-for-function-ps3_resp_status_convert-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_cmd_complete.c:error:no-previous-prototype-for-function-ps3_trigger_irq_poll-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_cmd_statistics.c:error:no-previous-prototype-for-function-ps3_cmd_stat_content_clear-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_cmd_statistics.c:error:no-previous-prototype-for-function-ps3_io_recv_ok_stat_inc-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_debug.c:error:no-previous-prototype-for-function-ps3_dump_dir_length-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager.c:error:no-previous-prototype-for-function-ps3_scsi_private_init_pd-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager.c:error:no-previous-prototype-for-function-ps3_scsi_private_init_vd-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_device_manager_sas.c:error:no-previous-prototype-for-function-ps3_sas_expander_phys_refresh-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_ioc_adp.c:error:no-previous-prototype-for-function-ps3_ioc_resource_prepare_hba-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_ioc_adp.c:error:no-previous-prototype-for-function-ps3_ioc_resource_prepare_raid-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_ioc_adp.c:error:no-previous-prototype-for-function-ps3_ioc_resource_prepare_switch-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_ioc_manager.c:error:no-previous-prototype-for-function-ps3_hard_reset_to_ready-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_ioctl.c:error:no-previous-prototype-for-function-ps3_clean_mgr_cmd-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_module_para.c:error:no-previous-prototype-for-function-ps3_cli_ver_query-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_cmd_waitq_abort-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_hba_qos_decision-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_hba_qos_vd_init-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_hba_qos_vd_reset-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_hba_qos_waitq_clear_all-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_hba_qos_waitq_notify-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_pd_quota_waitq_clean-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_pd_quota_waitq_clear_all-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_all_pd_rc_get-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_cmd_waitq_get-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_exclusive_cmdword_get-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_pd_waitq_ratio_update-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_tg_decision-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_qos.c:error:no-previous-prototype-for-function-ps3_qos_vd_cmdword_get-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_conflict_queue_hash_bit_lock-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_hash_bit_check-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_hash_bit_lock-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_hash_bit_unlock-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_hash_range_lock-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_r1x_hash_range_unlock-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_r1x_write_lock.c:error:no-previous-prototype-for-function-ps3_range_check_and_insert-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_rb_tree.c:error:no-previous-prototype-for-function-rbtDelNodeDo-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_hard_recovery_state_finish-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_recovery_context_alloc-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_recovery_context_delete-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_recovery_context_free-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_recovery_irq_queue_destroy-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_recovery.c:error:no-previous-prototype-for-function-ps3_recovery_state_transfer-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_sas_transport.c:error:no-previous-prototype-for-function-ps3_sas_update_phy_info-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_scsi_cmd_err.c:error:no-previous-prototype-for-function-ps3_set_task_manager_busy-Werror-Wmissing-prototypes | |-- drivers-scsi-linkdata-ps3stor-ps3_scsi_cmd_err.c:error:no-previous-prototype-for-function-ps3_wait_for_outstanding_complete-Werror-Wmissing-prototypes | |-- mm-damon-core-test.h:warning:comparison-of-distinct-pointer-types-(-typeof-(__left)-(aka-unsigned-int-)-and-typeof-(__right)-(aka-int-)) | |-- mm-hugetlb.c:warning:variable-gfp-set-but-not-used | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-mem_reliable.c:warning:arithmetic-between-different-enumeration-types-(-enum-node_stat_item-and-enum-lru_list-) | |-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-001-20250304 | |-- arch-x86-kernel-cpu-resctrl-rdtgroup.c:warning:variable-h-set-but-not-used | |-- mm-damon-core-test.h:warning:comparison-of-distinct-pointer-types-(-typeof-(__left)-(aka-unsigned-int-)-and-typeof-(__right)-(aka-int-)) | |-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-function-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-002-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-003-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-004-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-005-20250304 | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch |-- x86_64-buildonly-randconfig-006-20250304 | |-- mm-khugepaged.c:warning:Function-parameter-or-member-reliable-not-described-in-collapse_file | |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages | `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch `-- x86_64-defconfig |-- mm-page_alloc.c:warning:no-previous-prototype-for-__drain_all_pages `-- mm-page_alloc.c:warning:no-previous-prototype-for-__zone_set_pageset_high_and_batch elapsed time: 743m configs tested: 16 configs skipped: 119 tested configs: arm64 allmodconfig clang-18 arm64 allnoconfig gcc-14.2.0 arm64 defconfig gcc-14.2.0 arm64 randconfig-001-20250304 clang-21 arm64 randconfig-002-20250304 gcc-14.2.0 arm64 randconfig-003-20250304 gcc-14.2.0 arm64 randconfig-004-20250304 gcc-14.2.0 x86_64 allnoconfig clang-19 x86_64 allyesconfig clang-19 x86_64 buildonly-randconfig-001-20250304 clang-19 x86_64 buildonly-randconfig-002-20250304 gcc-12 x86_64 buildonly-randconfig-003-20250304 gcc-12 x86_64 buildonly-randconfig-004-20250304 gcc-12 x86_64 buildonly-randconfig-005-20250304 gcc-12 x86_64 buildonly-randconfig-006-20250304 gcc-12 x86_64 defconfig gcc-11 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH OLK-6.6] printk: Fix signed integer overflow when defining LOG_BUF_LEN_MAX
by Xiaomeng Zhang 05 Mar '25

05 Mar '25

From: Kuan-Wei Chiu <visitorckw(a)gmail.com> mainline inclusion from mainline-v6.14-rc1 commit 3d6f83df8ff2d5de84b50377e4f0d45e25311c7a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBQPCU Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Shifting 1 << 31 on a 32-bit int causes signed integer overflow, which leads to undefined behavior. To prevent this, cast 1 to u32 before performing the shift, ensuring well-defined behavior. This change explicitly avoids any potential overflow by ensuring that the shift occurs on an unsigned 32-bit integer. Signed-off-by: Kuan-Wei Chiu <visitorckw(a)gmail.com> Acked-by: Petr Mladek <pmladek(a)suse.com> Link: https://lore.kernel.org/r/20240928113608.1438087-1-visitorckw@gmail.com Signed-off-by: Petr Mladek <pmladek(a)suse.com> Conflicts: kernel/printk/printk.c [Fix context conflicts.] Signed-off-by: Xiaomeng Zhang <zhangxiaomeng13(a)huawei.com> --- kernel/printk/printk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index f6b48484a300..8d324657bbda 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -476,7 +476,7 @@ static struct latched_seq clear_seq = { /* record buffer */ #define LOG_ALIGN __alignof__(unsigned long) #define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT) -#define LOG_BUF_LEN_MAX (u32)(1 << 31) +#define LOG_BUF_LEN_MAX ((u32)1 << 31) static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN); static char *log_buf = __log_buf; static u32 log_buf_len = __LOG_BUF_LEN; -- 2.34.1

2 1

[PATCH openEuler-25.03 v6 0/4] Add TrIO support in EROFS
by Hongbo Li 05 Mar '25

05 Mar '25

TrIO can accelerate the cold start of containers during on-demand loading. It aggregates the read I/O operations required for container runtime during the first container launch. In the following startups, TrIO pulls the necessary I/O data to the container node in a single large I/O operation and uses this I/O information to construct the runtime rootfs. By improving the efficiency of network I/O, TrIO speeds up container startup in on-demand loading scenarios. TrIO consists of both kernel-space and user-space code. The kernel-space code has been adapted at the overlayfs layer, introducing the CONFIG_EROFS_TRIO configuration to provide isolation. The user-space code requires adaptation by the user, and detailed usage methods are introduced in the tools/trio/README.md section. Patches 1~2 correspond to the kernel adaptations, while patches 3~4 are the scripts and best practices that TrIO relies on for its operation. v6: - Add folio_put after filemap_get_folio. v5: - Adapt to the large folio tracepoint in erofs. - Adapt to the multiple type of page size (4k and 64k). v4: - Avoid the memleak of meta_buf. - Fix some exception handle from reviewer's suggestions. - Use spinlock in kprobe context. v3: - Obtain and keep the trio_object in open. - Only close readahead in trio case. Hongbo Li (4): erofs:trio: Add trio_manager in erofs erofs: trio: Support TrIO feature in erofs TrIO: Add tools for using TrIO TrIO: Add README.md arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/erofs/Kconfig | 11 + fs/erofs/Makefile | 1 + fs/erofs/fscache.c | 22 +- fs/erofs/inode.c | 2 + fs/erofs/internal.h | 56 ++ fs/erofs/super.c | 49 +- fs/erofs/trio_manager.c | 365 +++++++++++++ tools/trio/README.md | 517 +++++++++++++++++++ tools/trio/bpf/iotracker/Makefile | 99 ++++ tools/trio/bpf/iotracker/iotracker.bpf.c | 52 ++ tools/trio/bpf/iotracker/iotracker.c | 57 ++ tools/trio/bpf/rio_tracker_mod/Makefile | 9 + tools/trio/bpf/rio_tracker_mod/rio_tracker.c | 370 +++++++++++++ tools/trio/scripts/trace_parser.py | 287 ++++++++++ 16 files changed, 1896 insertions(+), 3 deletions(-) create mode 100644 fs/erofs/trio_manager.c create mode 100644 tools/trio/README.md create mode 100644 tools/trio/bpf/iotracker/Makefile create mode 100644 tools/trio/bpf/iotracker/iotracker.bpf.c create mode 100644 tools/trio/bpf/iotracker/iotracker.c create mode 100644 tools/trio/bpf/rio_tracker_mod/Makefile create mode 100644 tools/trio/bpf/rio_tracker_mod/rio_tracker.c create mode 100644 tools/trio/scripts/trace_parser.py -- 2.34.1

2 5

[PATCH OLK-6.6] USB: hub: Ignore non-compliant devices with too many configs or interfaces
by Bowen You 05 Mar '25

05 Mar '25

From: Alan Stern <stern(a)rowland.harvard.edu> mainline inclusion from mainline-v6.12-rc1 commit 2240fed37afbcdb5e8b627bc7ad986891100e05d category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBPC7J CVE: CVE-2025-21776 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Robert Morris created a test program which can cause usb_hub_to_struct_hub() to dereference a NULL or inappropriate pointer: Oops: general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] SMP DEBUG_PAGEALLOC PTI CPU: 7 UID: 0 PID: 117 Comm: kworker/7:1 Not tainted 6.13.0-rc3-00017-gf44d154d6e3d #14 Hardware name: FreeBSD BHYVE/BHYVE, BIOS 14.0 10/17/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_hub_adjust_deviceremovable+0x78/0x110 ... Call Trace: <TASK> ? die_addr+0x31/0x80 ? exc_general_protection+0x1b4/0x3c0 ? asm_exc_general_protection+0x26/0x30 ? usb_hub_adjust_deviceremovable+0x78/0x110 hub_probe+0x7c7/0xab0 usb_probe_interface+0x14b/0x350 really_probe+0xd0/0x2d0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x6e/0x110 driver_probe_device+0x1a/0x90 __device_attach_driver+0x7e/0xc0 bus_for_each_drv+0x7f/0xd0 __device_attach+0xaa/0x1a0 bus_probe_device+0x8b/0xa0 device_add+0x62e/0x810 usb_set_configuration+0x65d/0x990 usb_generic_driver_probe+0x4b/0x70 usb_probe_device+0x36/0xd0 The cause of this error is that the device has two interfaces, and the hub driver binds to interface 1 instead of interface 0, which is where usb_hub_to_struct_hub() looks. We can prevent the problem from occurring by refusing to accept hub devices that violate the USB spec by having more than one configuration or interface. Reported-and-tested-by: Robert Morris <rtm(a)csail.mit.edu> Cc: stable <stable(a)kernel.org> Closes: https://lore.kernel.org/linux-usb/95564.1737394039@localhost/ Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Link: https://lore.kernel.org/r/c27f3bf4-63d8-4fb5-ac82-09e3cd19f61c@rowland.harv… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Bowen You <youbowen2(a)huawei.com> --- drivers/usb/core/hub.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1ba3feb5e190..f295609649b1 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1818,6 +1818,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) desc = intf->cur_altsetting; hdev = interface_to_usbdev(intf); + /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: -- 2.34.1

2 1