- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 0/8] LoongArch: sync internal repository 20250414
by Hongchen Zhang 15 Apr '25

15 Apr '25

Ard Biesheuvel (1): objtool: Fix C jump table annotations for Clang Gao Qihang (1): LoongArch: Preserve firmware configuration if ACPI requires. Hongchen Zhang (1): LoongArch: set CONFIG_CPU_HAS_LBT=y Juxin Gao (1): LoongArch: configs: set CONFIG_UNWINDER_ORC=y Ming Wang (1): LoongArch: configs: Disable CONFIG_RT_GROUP_SCHED to prevent cgroup2 issues Tiezhu Yang (3): LoongArch: Handle fp, lsx, lasx and lbt assembly symbols LoongArch: Make some signal and ptrace functions non-static LoongArch: Export some signal functions arch/loongarch/configs/loongson3_defconfig | 3 +- arch/loongarch/include/asm/fpu.h | 6 ++++ arch/loongarch/include/asm/lbt.h | 4 +++ arch/loongarch/kernel/Makefile | 1 + arch/loongarch/kernel/extern.c | 31 ++++++++++++++++++ arch/loongarch/kernel/fpu.S | 6 ++++ arch/loongarch/kernel/lbt.S | 4 +++ arch/loongarch/kernel/ptrace.c | 37 +++++++++++++++------- arch/loongarch/kernel/signal.c | 28 +++------------- arch/loongarch/pci/acpi.c | 14 ++++++-- include/linux/compiler.h | 2 +- tools/objtool/check.c | 7 ++-- tools/objtool/include/objtool/special.h | 2 +- 13 files changed, 103 insertions(+), 42 deletions(-) create mode 100644 arch/loongarch/kernel/extern.c -- 2.43.0

2 10

[PATCH OLK-6.6 1/8] objtool: Fix C jump table annotations for Clang
by Hongchen Zhang 15 Apr '25

15 Apr '25

From: Ard Biesheuvel <ardb(a)kernel.org> mainline inclusion from mainline-v6.14-rc5 commit 73cfc53cc3b6380eccf013049574485f64cb83ca category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IC10DU CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- A C jump table (such as the one used by the BPF interpreter) is a const global array of absolute code addresses, and this means that the actual values in the table may not be known until the kernel is booted (e.g., when using KASLR or when the kernel VA space is sized dynamically). When using PIE codegen, the compiler will default to placing such const global objects in .data.rel.ro (which is annotated as writable), rather than .rodata (which is annotated as read-only). As C jump tables are explicitly emitted into .rodata, this used to result in warnings for LoongArch builds (which uses PIE codegen for the entire kernel) like Warning: setting incorrect section attributes for .rodata..c_jump_table due to the fact that the explicitly specified .rodata section inherited the read-write annotation that the compiler uses for such objects when using PIE codegen. This warning was suppressed by explicitly adding the read-only annotation to the __attribute__((section(""))) string, by commit c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Unfortunately, this hack does not work on Clang's integrated assembler, which happily interprets the appended section type and permission specifiers as part of the section name, which therefore no longer matches the hard-coded pattern '.rodata..c_jump_table' that objtool expects, causing it to emit a warning kernel/bpf/core.o: warning: objtool: ___bpf_prog_run+0x20: sibling call from callable instruction with modified stack frame Work around this, by emitting C jump tables into .data.rel.ro instead, which is treated as .rodata by the linker script for all builds, not just PIE based ones. Fixes: c5b1184decc8 ("compiler.h: specify correct attribute for .rodata..c_jump_table") Tested-by: Tiezhu Yang <yangtiezhu(a)loongson.cn> # on LoongArch Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Link: https://lore.kernel.org/r/20250221135704.431269-6-ardb+git@google.com Signed-off-by: Josh Poimboeuf <jpoimboe(a)kernel.org> --- include/linux/compiler.h | 2 +- tools/objtool/check.c | 7 ++++--- tools/objtool/include/objtool/special.h | 2 +- 3 files changed, 6 insertions(+), 5 deletions(-) diff --git a/include/linux/compiler.h b/include/linux/compiler.h index db140f106f3d..c61c59e26e1b 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -133,7 +133,7 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, #define annotate_unreachable() __annotate_unreachable(__COUNTER__) /* Annotate a C jump table to allow objtool to follow the code flow */ -#define __annotate_jump_table __section(".rodata..c_jump_table,\"a\",@progbits #") +#define __annotate_jump_table __section(".data.rel.ro.c_jump_table") #else /* !CONFIG_OBJTOOL */ #define annotate_reachable() diff --git a/tools/objtool/check.c b/tools/objtool/check.c index 6e9dd6d6db37..c88131a4b1d3 100644 --- a/tools/objtool/check.c +++ b/tools/objtool/check.c @@ -2559,13 +2559,14 @@ static void mark_rodata(struct objtool_file *file) * * - .rodata: can contain GCC switch tables * - .rodata.<func>: same, if -fdata-sections is being used - * - .rodata..c_jump_table: contains C annotated jump tables + * - .data.rel.ro.c_jump_table: contains C annotated jump tables * * .rodata.str1.* sections are ignored; they don't contain jump tables. */ for_each_sec(file, sec) { - if (!strncmp(sec->name, ".rodata", 7) && - !strstr(sec->name, ".str1.")) { + if ((!strncmp(sec->name, ".rodata", 7) && + !strstr(sec->name, ".str1.")) || + !strncmp(sec->name, ".data.rel.ro", 12)) { sec->rodata = true; found = true; } diff --git a/tools/objtool/include/objtool/special.h b/tools/objtool/include/objtool/special.h index 86d4af9c5aa9..89ee12b1a138 100644 --- a/tools/objtool/include/objtool/special.h +++ b/tools/objtool/include/objtool/special.h @@ -10,7 +10,7 @@ #include <objtool/check.h> #include <objtool/elf.h> -#define C_JUMP_TABLE_SECTION ".rodata..c_jump_table" +#define C_JUMP_TABLE_SECTION ".data.rel.ro.c_jump_table" struct special_alt { struct list_head list; -- 2.43.0

2 8

[PATCH openEuler-1.0-LTS] tty: goldfish: Use tty_port_destroy() to destroy port
by Gu Bowen 15 Apr '25

15 Apr '25

From: Wang Weiyang <wangweiyang2(a)huawei.com> stable inclusion from stable-v4.19.247 commit 326192b99c903a2193d820c30ed936cc2402382c category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBP6XS CVE: CVE-2022-49399 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 507b05063d1b7a1fcb9f7d7c47586fc4f3508f98 ] In goldfish_tty_probe(), the port initialized through tty_port_init() should be destroyed in error paths.In goldfish_tty_remove(), qtty->port also should be destroyed or else might leak resources. Fix the above by calling tty_port_destroy(). Fixes: 666b7793d4bf ("goldfish: tty driver") Reviewed-by: Jiri Slaby <jirislaby(a)kernel.org> Signed-off-by: Wang Weiyang <wangweiyang2(a)huawei.com> Link: https://lore.kernel.org/r/20220328115844.86032-1-wangweiyang2@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/tty/goldfish.c [Context conflicts due to commit 499e13aac6c7 ("tty: goldfish: Fix free_irq() on remove") has merged.] Signed-off-by: Gu Bowen <gubowen5(a)huawei.com> --- drivers/tty/goldfish.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 48ea55beaf43..d6e82eb61fc2 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -407,6 +407,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) err_tty_register_device_failed: free_irq(irq, qtty); err_dec_line_count: + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); @@ -428,6 +429,7 @@ static int goldfish_tty_remove(struct platform_device *pdev) iounmap(qtty->base); qtty->base = NULL; free_irq(qtty->irq, qtty); + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); -- 2.25.1

2 1

[PATCH OLK-5.10] drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
by Wang Zhaolong 15 Apr '25

15 Apr '25

From: Jiang Liu <gerry(a)linux.alibaba.com> mainline inclusion from mainline-v6.14-rc3 commit 1abb2648698bf10783d2236a6b4a7ca5e8021699 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBPC78 CVE: CVE-2025-21780 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- It malicious user provides a small pptable through sysfs and then a bigger pptable, it may cause buffer overflow attack in function smu_sys_set_pp_table(). Reviewed-by: Lijo Lazar <lijo.lazar(a)amd.com> Signed-off-by: Jiang Liu <gerry(a)linux.alibaba.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Conflicts: drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c [The smu->mutex in the context has not been removed.] Signed-off-by: Wang Zhaolong <wangzhaolong1(a)huawei.com> --- drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c index ee27970cfff9..98c9ac875daa 100644 --- a/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c +++ b/drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c @@ -325,12 +325,14 @@ int smu_sys_set_pp_table(struct smu_context *smu, void *buf, size_t size) dev_err(smu->adev->dev, "pp table size not matched !\n"); return -EIO; } mutex_lock(&smu->mutex); - if (!smu_table->hardcode_pptable) + if (!smu_table->hardcode_pptable || smu_table->power_play_table_size < size) { + kfree(smu_table->hardcode_pptable); smu_table->hardcode_pptable = kzalloc(size, GFP_KERNEL); + } if (!smu_table->hardcode_pptable) { ret = -ENOMEM; goto failed; } -- 2.34.3

2 1

[PATCH OLK-6.6 0/4] Some mainline patches merged into olk-6.6: drivers/hwmon
by Lifeng Zheng 15 Apr '25

15 Apr '25

From: Xinghai Cen <cenxinghai(a)h-partners.com> Some mainline patches merged into olk-6.6: drivers/hwmon Huisong Li (2): hwmon: Fix the missing of 'average' word in hwmon_power_attr_templates hwmon: (acpi_power_meter) Replace the deprecated hwmon_device_register Kai-Heng Feng (2): ACPI: IPMI: Add helper to wait for when SMI is selected hwmon: (acpi_power_meter) Ensure IPMI space handler is ready on Dell systems drivers/acpi/acpi_ipmi.c | 23 +- drivers/hwmon/acpi_power_meter.c | 874 ++++++++++++++++--------------- drivers/hwmon/hwmon.c | 4 +- include/acpi/acpi_bus.h | 5 + 4 files changed, 469 insertions(+), 437 deletions(-) -- 2.33.0

2 5

[PATCH OLK-6.6 0/2] soc cache: Add support for HiSilicon L3 cache
by Yushan Wang 15 Apr '25

15 Apr '25

driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IC15TR ---------------------------------------------------------------------- This series adds support for HiSilicon SoC cache lockdown and cache maintenance operations. Cache lockdown feature prevents cache entries from being evicted from L3 cache. It can be enabled by calling mmap function to the file (`/dev/hisi_soc_cache_mgmt`). This feature is implemented in the driver hisi_soc_l3c. Cache maintenance feature, following Arm64's CHI spec[1], enables users to raise certain transactions to the memory residing in the cache. This can be achieved by calling ioctl function to the same file as above. This feature is implemented in the driver hisi_soc_hha. L3 cache and L3 cache PMU share the same memory resource, which makes one fails to probe while another is on board. Since both devices rely on distinct information exported by ACPI, their probing functions should be unrelated. Workaround the resource conflict check by replacing devm_ioremap_resource() to devm_ioremap() instead. [1] https://developer.arm.com/documentation/ihi0050/latest/ Yushan Wang (2): soc cache: Add framework driver for HiSilicon SoC cache soc cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent drivers/soc/hisilicon/Kconfig | 22 + drivers/soc/hisilicon/Makefile | 3 + .../soc/hisilicon/hisi_soc_cache_framework.c | 381 ++++++++++++++++++ .../soc/hisilicon/hisi_soc_cache_framework.h | 77 ++++ drivers/soc/hisilicon/hisi_soc_hha.c | 188 +++++++++ .../uapi/misc/hisi_soc_cache/hisi_soc_cache.h | 35 ++ 6 files changed, 706 insertions(+) create mode 100644 drivers/soc/hisilicon/hisi_soc_cache_framework.c create mode 100644 drivers/soc/hisilicon/hisi_soc_cache_framework.h create mode 100644 drivers/soc/hisilicon/hisi_soc_hha.c create mode 100644 include/uapi/misc/hisi_soc_cache/hisi_soc_cache.h -- 2.33.0

2 3

[PATCH OLK-6.6 v8 0/7] Add support for IPIv
by Jinqian Yang 15 Apr '25

15 Apr '25

Patch#1 Allocate VM table and save vpeid in it Patch#2 avoid sending multi-SGIs in IPIV Patch#3 Set base address of vm table and targe ITS when vpe schedule and deschedule Patch#4 Register ipiv exception interrupt Patch#5 Add interface KVM_CAP_ARM_IPIV_MODE Patch#6 Probe and configure IPIV capacity on HIP12 Patch#7 Use KABI_EXTEND to perform kabi repair for IPIV Jinqian Yang (2): kvm: arm64: avoid sending multi-SGIs in IPIV kabi: Use KABI_EXTEND to perform kabi repair for IPIV Xiang Chen (5): kvm: hisi_virt: Allocate VM table and save vpeid in it irqchip: gicv3-its: Set base address of vm table and targe ITS when vpe schedule and deschedule kvm: hisi_virt: Register ipiv exception interrupt kvm: arm64: Add interface KVM_CAP_ARM_IPIV_MODE kvm: hisi_virt: Probe and configure IPIV capacity on HIP12 .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/include/asm/sysreg.h | 3 + arch/arm64/kvm/arm.c | 16 +++ arch/arm64/kvm/hisilicon/hisi_virt.c | 38 ++++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 11 +++ arch/arm64/kvm/sys_regs.c | 11 +++ arch/arm64/kvm/vgic/vgic-init.c | 44 ++++++++- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 1 + drivers/irqchip/irq-gic-v3-its.c | 97 ++++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 33 +++++++ include/linux/irqchip/arm-gic-v3.h | 24 +++++ include/linux/irqchip/arm-gic-v4.h | 2 + include/uapi/linux/kvm.h | 2 + 14 files changed, 282 insertions(+), 4 deletions(-) -- 2.33.0

2 8

[PATCH OLK-6.6 0/9] CVE-2024-50102
by Qi Xi 15 Apr '25

15 Apr '25

*** BLURB HERE *** David Gow (1): x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit David Laight (1): x86: fix off-by-one in access_ok() Linus Torvalds (5): runtime constants: deal with old decrepit linkers runtime constants: add x86 architecture support x86: fix whitespace in runtime-const assembler output x86/uaccess: Improve the 8-byte getuser() case x86: fix user address masking non-canonical speculation issue Stephen Brennan (1): dcache: keep dentry_hashtable or d_hash_shift even when not used Thomas Gleixner (1): x86/uaccess: Add missing __force to casts in __access_ok() and valid_user_address() arch/x86/include/asm/runtime-const.h | 61 +++++++++++++++++++++ arch/x86/include/asm/uaccess_64.h | 49 ++++++++++------- arch/x86/kernel/cpu/common.c | 10 ++++ arch/x86/kernel/vmlinux.lds.S | 4 ++ arch/x86/lib/getuser.S | 80 ++++++++++------------------ fs/dcache.c | 9 +++- include/asm-generic/vmlinux.lds.h | 7 +++ 7 files changed, 149 insertions(+), 71 deletions(-) create mode 100644 arch/x86/include/asm/runtime-const.h -- 2.33.0

2 10

[PATCH OLK-6.6 v8 0/7] Add support for IPIv
by Jinqian Yang 15 Apr '25

15 Apr '25

Patch#1 Allocate VM table and save vpeid in it Patch#2 avoid sending multi-SGIs in IPIV Patch#3 Set base address of vm table and targe ITS when vpe schedule and deschedule Patch#4 Register ipiv exception interrupt Patch#5 Add interface KVM_CAP_ARM_IPIV_MODE Patch#6 Probe and configure IPIV capacity on HIP12 Patch#7 Use KABI_EXTEND to perform kabi repair for IPIV Jinqian Yang (2): kvm: arm64: avoid sending multi-SGIs in IPIV kabi: Use KABI_EXTEND to perform kabi repair for IPIV Xiang Chen (5): kvm: hisi_virt: Allocate VM table and save vpeid in it irqchip: gicv3-its: Set base address of vm table and targe ITS when vpe schedule and deschedule kvm: hisi_virt: Register ipiv exception interrupt kvm: arm64: Add interface KVM_CAP_ARM_IPIV_MODE kvm: hisi_virt: Probe and configure IPIV capacity on HIP12 .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/include/asm/sysreg.h | 3 + arch/arm64/kvm/arm.c | 16 +++ arch/arm64/kvm/hisilicon/hisi_virt.c | 38 ++++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 11 +++ arch/arm64/kvm/sys_regs.c | 11 +++ arch/arm64/kvm/vgic/vgic-init.c | 44 ++++++++- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 1 + drivers/irqchip/irq-gic-v3-its.c | 97 ++++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 33 +++++++ include/linux/irqchip/arm-gic-v3.h | 24 +++++ include/linux/irqchip/arm-gic-v4.h | 2 + include/uapi/linux/kvm.h | 2 + 14 files changed, 282 insertions(+), 4 deletions(-) -- 2.33.0

2 8

[PATCH OLK-6.6 0/2] soc cache: Add support for HiSilicon L3 cache
by Yushan Wang 15 Apr '25

15 Apr '25

driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IC15TR ---------------------------------------------------------------------- This series adds support for HiSilicon SoC cache lockdown and cache maintenance operations. Cache lockdown feature prevents cache entries from being evicted from L3 cache. It can be enabled by calling mmap function to the file (`/dev/hisi_soc_cache_mgmt`). This feature is implemented in the driver hisi_soc_l3c. Cache maintenance feature, following Arm64's CHI spec[1], enables users to raise certain transactions to the memory residing in the cache. This can be achieved by calling ioctl function to the same file as above. This feature is implemented in the driver hisi_soc_hha. L3 cache and L3 cache PMU share the same memory resource, which makes one fails to probe while another is on board. Since both devices rely on distinct information exported by ACPI, their probing functions should be unrelated. Workaround the resource conflict check by replacing devm_ioremap_resource() to devm_ioremap() instead. [1] https://developer.arm.com/documentation/ihi0050/latest/ Yushan Wang (2): soc cache: Add framework driver for HiSilicon SoC cache soc cache: Support cache maintenance for HiSilicon SoC Hydra Home Agent drivers/soc/hisilicon/Kconfig | 22 + drivers/soc/hisilicon/Makefile | 3 + .../soc/hisilicon/hisi_soc_cache_framework.c | 381 ++++++++++++++++++ .../soc/hisilicon/hisi_soc_cache_framework.h | 77 ++++ drivers/soc/hisilicon/hisi_soc_hha.c | 188 +++++++++ .../uapi/misc/hisi_soc_cache/hisi_soc_cache.h | 35 ++ 6 files changed, 706 insertions(+) create mode 100644 drivers/soc/hisilicon/hisi_soc_cache_framework.c create mode 100644 drivers/soc/hisilicon/hisi_soc_cache_framework.h create mode 100644 drivers/soc/hisilicon/hisi_soc_hha.c create mode 100644 include/uapi/misc/hisi_soc_cache/hisi_soc_cache.h -- 2.33.0

2 3