From: Anshuman Khandual <anshuman.khandual@arm.com> mainline inclusion from mainline-v6.17-rc1 commit ae344bcb0d4967f6aa5f7b02f86bcfd389e513e4 category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/9066 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?i... ----------------------------------------------- To use the Branch Record Buffer Extension (BRBE), some configuration is necessary at EL3 and EL2. This patch documents the requirements and adds the initial EL2 setup code, which largely consists of configuring the fine-grained traps and initializing a couple of BRBE control registers. Before this patch, __init_el2_fgt() would initialize HDFGRTR_EL2 and HDFGWTR_EL2 with the same value, relying on the read/write trap controls for a register occupying the same bit position in either register. The 'nBRBIDR' trap control only exists in bit 59 of HDFGRTR_EL2, while bit 59 of HDFGWTR_EL2 is RES0, and so this assumption no longer holds. To handle HDFGRTR_EL2 and HDFGWTR_EL2 having (slightly) different bit layouts, __init_el2_fgt() is changed to accumulate the HDFGRTR_EL2 and HDFGWTR_EL2 control bits separately. While making this change the open-coded value (1 << 62) is replaced with HDFG{R,W}TR_EL2_nPMSNEVFR_EL1_MASK. The BRBCR_EL1 and BRBCR_EL2 registers are unusual and require special initialisation: even though they are subject to E2H renaming, both have an effect regardless of HCR_EL2.TGE, even when running at EL2. So we must initialize BRBCR_EL2 in case we run in nVHE mode. This is handled in __init_el2_brbe() with a comment to explain the situation. Cc: Marc Zyngier <maz@kernel.org> Cc: Oliver Upton <oliver.upton@linux.dev> Reviewed-by: Leo Yan <leo.yan@arm.com> Tested-by: James Clark <james.clark@linaro.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> [Mark: rewrite commit message, fix typo in comment] Signed-off-by: Mark Rutland <mark.rutland@arm.com> Co-developed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Rob Herring (Arm) <robh@kernel.org> tested-by: Adam Young <admiyo@os.amperecomputing.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20250611-arm-brbe-v19-v23-2-e7775563036e@kernel.or... Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Yushan Wang <wangyushan12@huawei.com> Conflicts: arch/arm64/include/asm/el2_setup.h Documentation/arch/arm64/booting.rst [resolved due to local EL2 boot setup differences and booting documentation context drift] Signed-off-by: Ying Jiang <jiangying44@h-partners.com> --- Documentation/arch/arm64/booting.rst | 21 ++++++++ arch/arm64/include/asm/el2_setup.h | 71 ++++++++++++++++++++++++++-- 2 files changed, 89 insertions(+), 3 deletions(-) diff --git a/Documentation/arch/arm64/booting.rst b/Documentation/arch/arm64/booting.rst index c03877e71727..34d1fac1687f 100644 --- a/Documentation/arch/arm64/booting.rst +++ b/Documentation/arch/arm64/booting.rst @@ -382,6 +382,27 @@ Before jumping into the kernel, the following conditions must be met: - SMCR_EL2.EZT0 (bit 30) must be initialised to 0b1. + For CPUs with the Branch Record Buffer Extension (FEAT_BRBE): + + - If EL3 is present: + + - MDCR_EL3.SBRBE (bits 33:32) must be initialised to 0b01 or 0b11. + + - If the kernel is entered at EL1 and EL2 is present: + + - BRBCR_EL2.CC (bit 3) must be initialised to 0b1. + - BRBCR_EL2.MPRED (bit 4) must be initialised to 0b1. + + - HDFGRTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + - HDFGRTR_EL2.nBRBIDR (bit 59) must be initialised to 0b1. + + - HDFGWTR_EL2.nBRBDATA (bit 61) must be initialised to 0b1. + - HDFGWTR_EL2.nBRBCTL (bit 60) must be initialised to 0b1. + + - HFGITR_EL2.nBRBIALL (bit 56) must be initialised to 0b1. + - HFGITR_EL2.nBRBINJ (bit 55) must be initialised to 0b1. + For CPUs with Memory Copy and Memory Set instructions (FEAT_MOPS): - If the kernel is entered at EL1 and EL2 is present: diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h index 5f82e8f2a924..31c00ba599fc 100644 --- a/arch/arm64/include/asm/el2_setup.h +++ b/arch/arm64/include/asm/el2_setup.h @@ -168,6 +168,28 @@ .Lskip_set_cptr_\@: .endm +/* + * Configure BRBE to permit recording cycle counts and branch mispredicts. + * + * At any EL, to record cycle counts BRBE requires that both BRBCR_EL2.CC=1 and + * BRBCR_EL1.CC=1. + * + * At any EL, to record branch mispredicts BRBE requires that both + * BRBCR_EL2.MPRED=1 and BRBCR_EL1.MPRED=1. + * + * Set {CC,MPRED} in BRBCR_EL2 in case nVHE mode is used and we are + * executing in EL1. + */ +.macro __init_el2_brbe + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_\@ + + mov_q x0, BRBCR_ELx_CC | BRBCR_ELx_MPRED + msr_s SYS_BRBCR_EL2, x0 +.Lskip_brbe_\@: +.endm + /* Disable any fine grained traps */ .macro __init_el2_fgt mrs x1, id_aa64mmfr0_el1 @@ -175,20 +197,62 @@ cbz x1, .Lskip_fgt_\@ mov x0, xzr + mov x2, xzr mrs x1, id_aa64dfr0_el1 ubfx x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4 cmp x1, #3 b.lt .Lskip_spe_fgt_\@ /* Disable PMSNEVFR_EL1 read and write traps */ - orr x0, x0, #(1 << 62) + orr x0, x0, #HDFGRTR_EL2_nPMSNEVFR_EL1_MASK + orr x2, x2, #HDFGWTR_EL2_nPMSNEVFR_EL1_MASK .Lskip_spe_fgt_\@: + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_fgt_\@ + + /* + * Disable read traps for the following registers + * + * [BRBSRC|BRBTGT|RBINF]_EL1 + * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1 + */ + orr x0, x0, #HDFGRTR_EL2_nBRBDATA_MASK + + /* + * Disable write traps for the following registers + * + * [BRBSRCINJ|BRBTGTINJ|BRBINFINJ|BRBTS]_EL1 + */ + orr x2, x2, #HDFGWTR_EL2_nBRBDATA_MASK + + /* Disable read and write traps for [BRBCR|BRBFCR]_EL1 */ + orr x0, x0, #HDFGRTR_EL2_nBRBCTL_MASK + orr x2, x2, #HDFGWTR_EL2_nBRBCTL_MASK + + /* Disable read traps for BRBIDR_EL1 */ + orr x0, x0, #HDFGRTR_EL2_nBRBIDR_MASK + +.Lskip_brbe_fgt_\@: .Lset_debug_fgt_\@: msr_s SYS_HDFGRTR_EL2, x0 - msr_s SYS_HDFGWTR_EL2, x0 + msr_s SYS_HDFGWTR_EL2, x2 mov x0, xzr + mov x2, xzr + + mrs x1, id_aa64dfr0_el1 + ubfx x1, x1, #ID_AA64DFR0_EL1_BRBE_SHIFT, #4 + cbz x1, .Lskip_brbe_insn_fgt_\@ + + /* Disable traps for BRBIALL instruction */ + orr x2, x2, #HFGITR_EL2_nBRBIALL_MASK + + /* Disable traps for BRBINJ instruction */ + orr x2, x2, #HFGITR_EL2_nBRBINJ_MASK + +.Lskip_brbe_insn_fgt_\@: mrs x1, id_aa64pfr1_el1 ubfx x1, x1, #ID_AA64PFR1_EL1_SME_SHIFT, #4 cbz x1, .Lskip_sme_fgt_\@ @@ -209,7 +273,7 @@ .Lskip_pie_fgt_\@: msr_s SYS_HFGRTR_EL2, x0 msr_s SYS_HFGWTR_EL2, x0 - msr_s SYS_HFGITR_EL2, xzr + msr_s SYS_HFGITR_EL2, x2 mrs x1, id_aa64pfr0_el1 // AMU traps UNDEF without AMU ubfx x1, x1, #ID_AA64PFR0_EL1_AMU_SHIFT, #4 @@ -240,6 +304,7 @@ __init_el2_hcrx __init_el2_timers __init_el2_debug + __init_el2_brbe __init_el2_lor __init_el2_stage2 __init_el2_gicv3 -- 2.33.0