October 2022 - Acc - mailweb.openeuler.org

[PATCH v6 0/6] uadk - add wd_comp_init2
by Yang Shen 02 Nov '22

02 Nov '22

The current uadk initialization process is: 1.Call wd_request_ctx() to request ctxs from devices. 2.Call wd_sched_rr_alloc() to create a sched(or some other scheduler alloc function if exits). 3.Initialize the sched. 4.Call wd_<alg>_init() with ctx_config and sched. Logic is reasonable. But in practice, the step of `wd_ request_ Ctx() ` and `wd_ sched_ rr_alloc() ` are very tedious. This makes it difficult for users to use the interface. One of the main reasons for this is that uadk has made a lot of configurations in the scheduler in order to provide users with better performance. Based on this consideration, the current uadk requires the user to arrange the division of hardware resources according to the device topology during initialization. Therefore, as a high-level interface, this scheme can provide customized scheme configuration for users with deep needs. All algorithm initialization interfaces have the same input parameters and behavioral logic. The pre-processing of the wd_<alg>_init is actually the configuration of `struct wd_ctx_config` and `struct wd_sched`. Therefore, the next thing to be done is to use limited and easy-to-use input parameters to describe users' requirements on the two input parameters, ensuring that the functions of the new interface init2 are the same as those of init. For ease of description, v1 is used to refer to the existing interface, and v2 is used to refer to the layer of encapsulation. At present, at least 4 parameters are required to meet the user configuration requirements with the V1 interface function remains unchanged. @alg: The algorithm users wanted. @sched_type: Scheduling type the user wants to use. @task_tp: Reserved. @wd_ctx_params: op_type_num and ctx_set_num means the requested ctx number for each numa node. Due to users may have different requirements for different types of ctx numbers, needs a two-dimensional array as input. The bitmask provided by libnuma. Users can use this parameter to control requesting ctxs devices in the bind NUMA scenario. This parameter is mainly convenient for users to use in the binding cpu scenario. It can avoid resource waste or initialization failure caused by insufficient resources. Libnuma provides a complete operation interface which can be found in numa.h. Changelog: v5->v6: - Update a limit between wd_comp_init() and wd_comp_init2_(). If the wd_comp_init2_() is called after wd_comp_init(), some ctx resources may be leak until called wd_comp_uninit2(). v4->v5: - Update wd_comp_init2() and wd_comp_init2_() parameters. v3->v4: - Resume the wd_comp_init2() parameters and rename it to wd_comp_init2_(). Then add a macro named wd_comp_init2() which has a simpler parameters. v2->v3: - Update the wd_comp_init2() parameters. v1->v2: - Update the desdescription about wd_<alg>_init in wd_design.md. Yang Shen (6): uadk - support algorithms initialization reentry protect uadk/doc - update wd_alg_init support reentrancy uadk - support return error number as pointer uadk - mv some function to header file uadk/comp - add wd_comp_init2 uadk/docs - support a simple interface for initialization Makefile.am | 4 +- docs/wd_alg_init2.md | 159 ++++++++++++++++++++++++ docs/wd_design.md | 5 +- include/wd.h | 54 ++++++++- include/wd_alg_common.h | 27 +++++ include/wd_comp.h | 30 +++++ include/wd_util.h | 66 ++++++++++ wd.c | 97 ++++++++++++--- wd_aead.c | 33 +++-- wd_cipher.c | 35 ++++-- wd_comp.c | 129 ++++++++++++++++++-- wd_dh.c | 34 ++++-- wd_digest.c | 33 +++-- wd_ecc.c | 33 +++-- wd_rsa.c | 33 +++-- wd_util.c | 260 +++++++++++++++++++++++++++++++++++++++- 16 files changed, 926 insertions(+), 106 deletions(-) create mode 100644 docs/wd_alg_init2.md -- 2.24.0

3 12

FSC
by Ms K. Ngui 01 Nov '22

01 Nov '22

Kindly confirm if your email (][-Email-]]) is still active ? the reason for my question is because i am yet to recieved a reply in regards to my message sent to your email earlier this week. Thanks Mrs Karen Ngui GMD - DBS

1 0

[PATCH v5 0/6] uadk - add wd_comp_init2
by Yang Shen 29 Oct '22

29 Oct '22

The current uadk initialization process is: 1.Call wd_request_ctx() to request ctxs from devices. 2.Call wd_sched_rr_alloc() to create a sched(or some other scheduler alloc function if exits). 3.Initialize the sched. 4.Call wd_<alg>_init() with ctx_config and sched. Logic is reasonable. But in practice, the step of `wd_ request_ Ctx() ` and `wd_ sched_ rr_alloc() ` are very tedious. This makes it difficult for users to use the interface. One of the main reasons for this is that uadk has made a lot of configurations in the scheduler in order to provide users with better performance. Based on this consideration, the current uadk requires the user to arrange the division of hardware resources according to the device topology during initialization. Therefore, as a high-level interface, this scheme can provide customized scheme configuration for users with deep needs. All algorithm initialization interfaces have the same input parameters and behavioral logic. The pre-processing of the wd_<alg>_init is actually the configuration of `struct wd_ctx_config` and `struct wd_sched`. Therefore, the next thing to be done is to use limited and easy-to-use input parameters to describe users' requirements on the two input parameters, ensuring that the functions of the new interface init2 are the same as those of init. For ease of description, v1 is used to refer to the existing interface, and v2 is used to refer to the layer of encapsulation. At present, at least 4 parameters are required to meet the user configuration requirements with the V1 interface function remains unchanged. @alg: The algorithm users wanted. @sched_type: Scheduling type the user wants to use. @task_tp: Reserved. @wd_ctx_params: op_type_num and ctx_set_num means the requested ctx number for each numa node. Due to users may have different requirements for different types of ctx numbers, needs a two-dimensional array as input. The bitmask provided by libnuma. Users can use this parameter to control requesting ctxs devices in the bind NUMA scenario. This parameter is mainly convenient for users to use in the binding cpu scenario. It can avoid resource waste or initialization failure caused by insufficient resources. Libnuma provides a complete operation interface which can be found in numa.h. Changelog: v4->v5: - Update wd_comp_init2() and wd_comp_init2_() parameters. v3->v4: - Resume the wd_comp_init2() parameters and rename it to wd_comp_init2_(). Then add a macro named wd_comp_init2() which has a simpler parameters. v2->v3: - Update the wd_comp_init2() parameters. v1->v2: - Update the desdescription about wd_<alg>_init in wd_design.md. Yang Shen (6): uadk - support algorithms initialization reentry protect uadk/doc - update wd_alg_init support reentrancy uadk - support return error number as pointer uadk - mv some function to header file uadk/comp - add wd_comp_init2 uadk/docs - support a simple interface for initialization Makefile.am | 4 +- docs/wd_alg_init2.md | 156 ++++++++++++++++++++++++ docs/wd_design.md | 5 +- include/wd.h | 54 ++++++++- include/wd_alg_common.h | 27 +++++ include/wd_comp.h | 28 +++++ include/wd_util.h | 56 +++++++++ wd.c | 97 ++++++++++++--- wd_aead.c | 33 +++-- wd_cipher.c | 35 ++++-- wd_comp.c | 122 +++++++++++++++++-- wd_dh.c | 34 ++++-- wd_digest.c | 33 +++-- wd_ecc.c | 33 +++-- wd_rsa.c | 33 +++-- wd_util.c | 260 +++++++++++++++++++++++++++++++++++++++- 16 files changed, 904 insertions(+), 106 deletions(-) create mode 100644 docs/wd_alg_init2.md -- 2.24.0

1 6

[PATCH v4 0/6] uadk - add wd_comp_init2
by Yang Shen 28 Oct '22

28 Oct '22

The current uadk initialization process is: 1.Call wd_request_ctx() to request ctxs from devices. 2.Call wd_sched_rr_alloc() to create a sched(or some other scheduler alloc function if exits). 3.Initialize the sched. 4.Call wd_<alg>_init() with ctx_config and sched. Logic is reasonable. But in practice, the step of `wd_ request_ Ctx() ` and `wd_ sched_ rr_alloc() ` are very tedious. This makes it difficult for users to use the interface. One of the main reasons for this is that uadk has made a lot of configurations in the scheduler in order to provide users with better performance. Based on this consideration, the current uadk requires the user to arrange the division of hardware resources according to the device topology during initialization. Therefore, as a high-level interface, this scheme can provide customized scheme configuration for users with deep needs. All algorithm initialization interfaces have the same input parameters and behavioral logic. The pre-processing of the wd_<alg>_init is actually the configuration of `struct wd_ctx_config` and `struct wd_sched`. Therefore, the next thing to be done is to use limited and easy-to-use input parameters to describe users' requirements on the two input parameters, ensuring that the functions of the new interface init2 are the same as those of init. For ease of description, v1 is used to refer to the existing interface, and v2 is used to refer to the layer of encapsulation. At present, at least 4 parameters are required to meet the user configuration requirements with the V1 interface function remains unchanged. @device_list: The available uacce device list. Users can get it by wd_get_accel_list(). @numa_bitmask: The bitmask provided by libnuma. Users can use this parameter to control requesting ctxs devices in the bind NUMA scenario. @ctx_nums: The requested ctx number for each numa node. Due to users may have different requirements for different types of ctx numbers, needs a two-dimensional array as input. @sched_type: Scheduling type the user wants to use. What's more, some users want uadk to provide the default value about input parameters for some performance insensitive scenes. C code has no way to. Changelog: v3->v4: - Resume the wd_comp_init2() parameters and rename it to wd_comp_init2_(). Then add a macro named wd_comp_init2() which has a simpler parameters. v2->v3: - Update the wd_comp_init2() parameters. v1->v2: - Update the desdescription about wd_<alg>_init in wd_design.md. Yang Shen (6): uadk - support algorithms initialization reentry protect uadk/doc - update wd_alg_init support reentrancy uadk - support return error number as pointer uadk - mv some function to header file uadk/comp - add wd_comp_init2 uadk/docs - support a simple interface for initialization Makefile.am | 4 +- docs/wd_alg_init2.md | 154 ++++++++++++++++++++++++ docs/wd_design.md | 5 +- include/wd.h | 54 ++++++++- include/wd_alg_common.h | 24 ++++ include/wd_comp.h | 27 +++++ include/wd_util.h | 57 +++++++++ wd.c | 97 ++++++++++++--- wd_aead.c | 33 +++-- wd_cipher.c | 35 ++++-- wd_comp.c | 121 +++++++++++++++++-- wd_dh.c | 34 ++++-- wd_digest.c | 33 +++-- wd_ecc.c | 33 +++-- wd_rsa.c | 33 +++-- wd_util.c | 260 +++++++++++++++++++++++++++++++++++++++- 16 files changed, 898 insertions(+), 106 deletions(-) create mode 100644 docs/wd_alg_init2.md -- 2.24.0

2 8

[PATCH v7 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 28 Oct '22

28 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update in v7: 05: fix key_size of SHA384 HMAC Update in v6: Akhil helped review the v5, and address all the comments from Akhil 01: add rel_notes info, update uadk.rst, put struct in header, etc. 02: move struct to header 04: move struct to header, remove RTE_CRYPTODEV_FF_SYM_SESSIONLESS 05: fixed key_size in HMAC mode 06: updated app/test/meson.build and uadk.rst in the mean time. Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: support uadk PMD MAINTAINERS | 6 + app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 + doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 96 ++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1081 +++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 79 ++ drivers/crypto/uadk/version.map | 3 + 13 files changed, 1367 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map -- 2.25.1

2 8

[PATCH v6 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 27 Oct '22

27 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update in v6: Akhil helped review the v5, and address all the comments from Akhil 01: add rel_notes info, update uadk.rst, put struct in header, etc. 02: move struct to header 04: move struct to header, remove RTE_CRYPTODEV_FF_SYM_SESSIONLESS 05: fixed key_size in HMAC mode 06: updated app/test/meson.build and uadk.rst in the mean time. Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: support uadk PMD MAINTAINERS | 6 + app/test/meson.build | 1 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 + doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 96 ++ doc/guides/rel_notes/release_22_11.rst | 6 + drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1075 +++++++++++++++++ drivers/crypto/uadk/uadk_crypto_pmd_private.h | 79 ++ drivers/crypto/uadk/version.map | 3 + 13 files changed, 1361 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd_private.h create mode 100644 drivers/crypto/uadk/version.map -- 2.38.1

2 8

[PATCH resend v5 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 26 Oct '22

26 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit resend: fix uadk lib, still use <uadk/wd_cipher.h> Update in v5 Patch 1 fix the build issue when uadk is installed to specific folder And update doc accordingly Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 94 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1141 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1339 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.38.1

2 16

UADK双周例会
by openEuler conference 26 Oct '22

26 Oct '22

您好！ sig-AccLib SIG 邀请您参加 2022-10-26 11:00 召开的Zoom会议会议主题：UADK双周例会会议内容： zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.pkg-config技术分享会议链接：https://us06web.zoom.us/j/81869388219?pwd=K0ltZk9kSTRUS2RSNFFnS3NKSDNodz09 会议纪要：https://etherpad.openeuler.org/p/sig-AccLib-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler sig-AccLib SIG invites you to attend the Zoom conference will be held at 2022-10-26 11:00, The subject of the conference is UADK双周例会, Summary: zoom会议，ID: 91879279131 固定的会议链接：https://linaro-org.zoom.us/j/91879279131 1.进展讨论 2.pkg-config技术分享 You can join the meeting at https://us06web.zoom.us/j/81869388219?pwd=K0ltZk9kSTRUS2RSNFFnS3NKSDNodz09. Add topics at https://etherpad.openeuler.org/p/sig-AccLib-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH v4 0/6] crypto/uadk: introduce uadk crypto driver
by Zhangfei Gao 24 Oct '22

24 Oct '22

Introduce a new crypto PMD for hardware accelerators based on UADK [1]. UADK is a framework for user applications to access hardware accelerators. UADK relies on IOMMU SVA (Shared Virtual Address) feature, which share the same page table between IOMMU and MMU. Thereby user application can directly use virtual address for device dma, which enhances the performance as well as easy usability. [1] https://github.com/Linaro/uadk Test: sudo dpdk-test --vdev=crypto_uadk (--log-level=6) RTE>>cryptodev_uadk_autotest RTE>>quit Update in v4: Akril suggest dpdk use pkg-config, So Enable uadk support x86 local build, and support pkg-config. Use pkg-config feature for the uadk crypto pmd. Add build uadk library steps in doc Test on both x86 and arm. x86 can build and install, but can not test since no device. Resend v3: Rebase on next/for-main, which just merged the series "cryptodev: rework session framework". Update in v3: Split patches according to Akhil's suggestions Please split the patches as below. 1. introduce driver - create files with meson.build and with probe/remove and device ops defined but not implemented. You do not need to write empty functions. Add basic documentation also which defines what the driver is. You can explain the build dependency here. 2. define queue structs and setup/remove APIs 3. Add data path 4. implement cipher op. Add capabilities and documentation of what is supported in each of the patches. Add feature flags etc. 5. implement auth, add capabilities and documentation 6. test app changes. Update in v2: Change uadk_supported_platform to uadk_crypto_version, which matches better than platform. enum uadk_crypto_version { UADK_CRYPTO_V2, UADK_CRYPTO_V3, }; Update in v1, compared with rfc Suggested from Akhil Goyal <gakhil(a)marvell.com> Only consider crypto PMD first Split patch into small (individually compiled) patches. Update MAINTAINERS and doc/guides/cryptodevs/features/uadk.ini Zhangfei Gao (6): crypto/uadk: introduce uadk crypto driver crypto/uadk: support basic operations crypto/uadk: support enqueue/dequeue operations crypto/uadk: support cipher algorithms crypto/uadk: support auth algorithms test/crypto: add cryptodev_uadk_autotest MAINTAINERS | 6 + app/test/test_cryptodev.c | 7 + app/test/test_cryptodev.h | 1 + doc/guides/cryptodevs/features/uadk.ini | 55 ++ doc/guides/cryptodevs/index.rst | 1 + doc/guides/cryptodevs/uadk.rst | 88 ++ drivers/crypto/meson.build | 1 + drivers/crypto/uadk/meson.build | 30 + drivers/crypto/uadk/uadk_crypto_pmd.c | 1145 +++++++++++++++++++++++ drivers/crypto/uadk/version.map | 3 + 10 files changed, 1337 insertions(+) create mode 100644 doc/guides/cryptodevs/features/uadk.ini create mode 100644 doc/guides/cryptodevs/uadk.rst create mode 100644 drivers/crypto/uadk/meson.build create mode 100644 drivers/crypto/uadk/uadk_crypto_pmd.c create mode 100644 drivers/crypto/uadk/version.map -- 2.36.1

2 12

[PATCH 00/10] uadk_engine: some bugfix and cleanup
by Zhiqi Song 21 Oct '22

21 Oct '22

This is a patch set about some bugfix and cleanup of uadk_engine. Hao Fang (1): uadk_engine: use HW_V2/HW_V3 to distinguish different hardware platforms. Longfang Liu (1): uadk/engine: Update the numa parameter of the scheduler Zhiqi Song (8): sm2: bugfix about segfault in sm2 ctrl function uadk_engine: bugfix side effects of right operand uadk_engine: cleanup avoid modify param of functions rsa: cleanup uninitialized value uadk_engine: cleanup storage class position uadk_engine: bugfix enable environment variable uadk_engine: cleanup magic number and comments uadk_engine: cleanup header file -- 2.30.0

1 10