October 2021 - Kernel - mailweb.openeuler.org

Re: [PATCH openEuler-21.03] vfio-ccw: Reset FSM state to IDLE inside FSM
by Wangshaobo (bobo) 29 Oct '21

29 Oct '21

Reviewed-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> 在 2021/10/28 22:42, Chen Silong 写道: > From: Eric Farman <farman(a)linux.ibm.com> > > stable inclusion > from stable-v5.10.44 > commit cad3dc73c0645d00adfe96cebc8d950897cc1227 > bugzilla:https://bugzilla.openeuler.org/show_bug.cgi?id=453 > CVE: NA > > ------------------------------------------------- > > [ Upstream commit 6c02ac4c9211edabe17bda437ac97e578756f31b ] > > When an I/O request is made, the fsm_io_request() routine > moves the FSM state from IDLE to CP_PROCESSING, and then > fsm_io_helper() moves it to CP_PENDING if the START SUBCHANNEL > received a cc0. Yet, the error case to go from CP_PROCESSING > back to IDLE is done after the FSM call returns. > > Let's move this up into the FSM proper, to provide some > better symmetry when unwinding in this case. > > Signed-off-by: Eric Farman <farman(a)linux.ibm.com> > Reviewed-by: Cornelia Huck <cohuck(a)redhat.com> > Acked-by: Matthew Rosato <mjrosato(a)linux.ibm.com> > Message-Id: <20210511195631.3995081-3-farman(a)linux.ibm.com> > Signed-off-by: Cornelia Huck <cohuck(a)redhat.com> > Signed-off-by: Sasha Levin <sashal(a)kernel.org> > Signed-off-by: Chen Silong <2019117735(a)my.swjtu.edu.cn> > --- > drivers/s390/cio/vfio_ccw_fsm.c | 1 + > drivers/s390/cio/vfio_ccw_ops.c | 2 -- > 2 files changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/s390/cio/vfio_ccw_fsm.c b/drivers/s390/cio/vfio_ccw_fsm.c > index 23e61aa638e4..e435a9cd92da 100644 > --- a/drivers/s390/cio/vfio_ccw_fsm.c > +++ b/drivers/s390/cio/vfio_ccw_fsm.c > @@ -318,6 +318,7 @@ static void fsm_io_request(struct vfio_ccw_private *private, > } > > err_out: > + private->state = VFIO_CCW_STATE_IDLE; > trace_vfio_ccw_fsm_io_request(scsw->cmd.fctl, schid, > io_region->ret_code, errstr); > } > diff --git a/drivers/s390/cio/vfio_ccw_ops.c b/drivers/s390/cio/vfio_ccw_ops.c > index 1ad5f7018ec2..2280f51dd679 100644 > --- a/drivers/s390/cio/vfio_ccw_ops.c > +++ b/drivers/s390/cio/vfio_ccw_ops.c > @@ -276,8 +276,6 @@ static ssize_t vfio_ccw_mdev_write_io_region(struct vfio_ccw_private *private, > } > > vfio_ccw_fsm_event(private, VFIO_CCW_EVENT_IO_REQ); > - if (region->ret_code != 0) > - private->state = VFIO_CCW_STATE_IDLE; > ret = (region->ret_code != 0) ? region->ret_code : count; > > out_unlock:

1 0

[PATCH openEuler-1.0-LTS V3 0/6] Fix the problem that the number of tcp timeout retransmissions is lost
by Laibin Qiu 29 Oct '21

29 Oct '21

issue: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue Eric Dumazet (4): tcp: switch tcp and sch_fq to new earliest departure time model net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows tcp: address problems caused by EDT misshaps tcp: adjust rto_base in retransmits_timed_out() Yuchung Cheng (2): tcp: always set retrans_stamp on recovery tcp: create a helper to model exponential backoff net/ipv4/tcp_bbr.c | 7 +++-- net/ipv4/tcp_input.c | 17 +++++++----- net/ipv4/tcp_output.c | 31 +++++++++++++++------ net/ipv4/tcp_timer.c | 64 ++++++++++++++++++++----------------------- net/sched/sch_fq.c | 46 ++++++++++++++++++------------- 5 files changed, 93 insertions(+), 72 deletions(-) -- 2.22.0

1 6

[PATCH openEuler-1.0-LTS V2 0/6] Fix the problem that the
by Laibin Qiu 29 Oct '21

29 Oct '21

issue: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue Eric Dumazet (4): tcp: switch tcp and sch_fq to new earliest departure time model net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows tcp: address problems caused by EDT misshaps tcp: adjust rto_base in retransmits_timed_out() Yuchung Cheng (2): tcp: always set retrans_stamp on recovery tcp: create a helper to model exponential backoff net/ipv4/tcp_bbr.c | 7 +++-- net/ipv4/tcp_input.c | 17 +++++++----- net/ipv4/tcp_output.c | 31 +++++++++++++++------ net/ipv4/tcp_timer.c | 64 ++++++++++++++++++++----------------------- net/sched/sch_fq.c | 46 ++++++++++++++++++------------- 5 files changed, 93 insertions(+), 72 deletions(-) -- 2.22.0

1 6

[PATCH openEuler-1.0-LTS] README: README optimize
by Laibin Qiu 29 Oct '21

29 Oct '21

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- README | 226 --------------------------------------------------- README.md | 237 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 237 insertions(+), 226 deletions(-) delete mode 100644 README create mode 100644 README.md diff --git a/README b/README deleted file mode 100644 index 46c9ea352..000000000 --- a/README +++ /dev/null @@ -1,226 +0,0 @@ -Contributions to openEuler kernel project -========================================= - -Sign CLA --------- - -Before submitting any Contributions to openEuler, you have to sign CLA. - -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html - -Steps of submitting patches ---------------------------- - -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. - - Using scripts/checkpatch.pl to make sure there's no coding style issue. - - And make sure your patch follow unified openEuler patch format describe - below. - -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: - - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all - - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. - - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email - -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. - - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 - - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching - -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. - -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. - - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html - - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: - - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - By making a contribution to this project, I certify that: - - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or - - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or - - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. - - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. - - then you just add a line saying: - - Signed-off-by: Random J Developer <random(a)developer.example.org> - - using your real name (sorry, no pseudonyms or anonymous contributions.) - -Use unified patch format ------------------------- - -Reasons: - -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. - -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. - -3. easy for script parsing - Keyword highlighting is necessary for script parsing. - -Patch format definition ------------------------ - -[M] stands for "mandatory" -[O] stands for "option" -$category can be: bug preparation, bugfix, perf, feature, doc, other... - -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) - -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id - -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem - -The detail information is very useful for porting patch to another kenrel branch. - -Example for mainline patch: - - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] - - additional changelog [O] - - -------------------------------- - - original changelog - - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] - - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) - -Examples --------- - -mainline inclusion -from mainline-4.10 -commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 -category: bugfix -bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . - -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... - -------------------------------------------------- - -original changelog - -<original S-O-B> -Signed-off-by: Zhang San <zhangsan(a)huawei.com> -Tested-by: Li Si <lisi(a)huawei.com> - -Email Client - Thunderbird Settings ------------------------------------ - -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. - -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 - - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ - -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". - - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. - - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap - -Linux kernel -============ - -There are several guides for kernel developers and users. These guides can -be rendered in a number of formats, like HTML and PDF. Please read -Documentation/admin-guide/README.rst first. - -In order to build the documentation, use ``make htmldocs`` or -``make pdfdocs``. The formatted documentation can also be read online at: - - https://www.kernel.org/doc/html/latest/ - -There are various text files in the Documentation/ subdirectory, -several of them using the Restructured Text markup notation. -See Documentation/00-INDEX for a list of what is contained in each file. - -Please read the Documentation/process/changes.rst file, as it contains the -requirements for building and running the kernel, and information about -the problems which may result by upgrading your kernel. diff --git a/README.md b/README.md new file mode 100644 index 000000000..20832fd85 --- /dev/null +++ b/README.md @@ -0,0 +1,237 @@ +# How to Contribute +------- + +- [How to Contribute](#How to Contribute) + + \- [Sign the CLA](#Sign the CLA) + + \- [Steps of submitting patches](#Steps of submitting patches) + + \- [Use the unified patch format](#Use the unified patch format) + + \- [Define the patch format](#Define the patch format) + + \- [Examples](#Examples) + + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) + +- [Linux kernel](#Linux kernel) + +### Sign the CLA + +------- + +Before making any contributions to openEuler, sign the CLA first. + +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) + +### Steps of submitting patches +------- + +**Step 1** Compile and test your patches. + +**Step 2** Generate patches. + +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. + +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. + +In addition, ensure that your patches comply with the unified openEuler patch format described below. + +**Step 3** Send your patches to the openEuler mailing list. + +To do so, run the following command: + + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` + +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. + +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. + +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. + +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. + + `git format-patch --subject-prefix="PATCH v2" -1` + +Subject examples: + + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- + +Reasons: + +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade + + We definitely will upgrade our openEuler kernel in someday, so strict patch management + + will alleviate the pain to migrate patches during big upgrades. + +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". + +$category can be: bug preparation, bugfix, perf, feature, doc, other... + +If category is feature, we need to add a feature name as below: + +```cpp +category: feature +feature: YYY (the feature name) +``` + +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): + +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` + +Additional changelog should include at least one of the following: + +1. Why we should apply this patch + +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: + +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] + +additional changelog [O] + +-------------------------------- + +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` + +### Examples +------- + +```cpp +mainline inclusion +from mainline-4.10 +commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 +category: bugfix +bugzilla: 3004 +CVE: N/A + +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP + +------------------------------------------------- + +original changelog + +<original S-O-B> +Signed-off-by: Zhang San <zhangsan(a)huawei.com> +Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. + + 2.2 Editor settings + + **Tools > Options> Advanced > Config editor** + + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. + + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. + + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. + + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. + + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. + +# Linux kernel +------- + +There are several guides for kernel developers and users, which can be rendered in a number of formats, like HTML and PDF. You can read **Documentation/admin-guide/README.rst** first. + +In order to build the documentation, use **make htmldocs** or **make pdfdocs**. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ + +There are various text files in the Documentation/ subdirectory, several of which use the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. + +Read the **Documentation/process/changes.rst** file, as it contains the requirements for building and running the kernel, and information about the problems that may be caused by upgrading your kernel. + -- 2.22.0

1 0

[PATCH openEuler-1.0-LTS v2 00/26] support psi feature
by Liu Xinpeng 28 Oct '21

28 Oct '21

backport psi feature and avoid kabi change bugzilla: https://gitee.com/openeuler/kernel/issues/I47QS2 Baruch Siach (1): psi: fix reference to kernel commandline enable Dan Schatzberg (1): kernel/sched/psi.c: expose pressure metrics on root cgroup Johannes Weiner (12): mm: workingset: tell cache transitions from workingset thrashing sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD sched: loadavg: make calc_load_n() public sched: sched.h: make rq locking and clock functions available in stats.h sched: introduce this_rq_lock_irq() psi: pressure stall information for CPU, memory, and IO psi: cgroup support psi: make disabling/enabling easier for vendor kernels psi: fix aggregation idle shut-off psi: avoid divide-by-zero crash inside virtual machines fs: kernfs: add poll file operation sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime Josef Bacik (1): blk-iolatency: use a percentile approache for ssd's Liu Xinpeng (2): psi:enable psi in config psi:avoid kabi change Miklos Szeredi (1): fuse: ignore PG_workingset after stealing Olof Johansson (1): kernel/sched/psi.c: simplify cgroup_move_task() Suren Baghdasaryan (6): psi: introduce state_mask to represent stalled psi states psi: make psi_enable static psi: rename psi fields in preparation for psi trigger addition psi: split update_stats into parts psi: track changed states include/: refactor headers to allow kthread.h inclusion in psi_types.h Yafang Shao (1): mm, memcg: add workingset_restore in memory.stat Documentation/accounting/psi.txt | 73 +++ Documentation/admin-guide/cgroup-v2.rst | 22 + Documentation/admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/powerpc/platforms/cell/cpufreq_spudemand.c | 2 +- arch/powerpc/platforms/cell/spufs/sched.c | 9 +- arch/s390/appldata/appldata_os.c | 4 - arch/x86/configs/openeuler_defconfig | 2 + block/blk-iolatency.c | 183 +++++- drivers/cpuidle/governors/menu.c | 4 - drivers/spi/spi-rockchip.c | 1 + fs/fuse/dev.c | 1 + fs/kernfs/file.c | 31 +- fs/proc/loadavg.c | 3 - include/linux/cgroup-defs.h | 12 + include/linux/cgroup.h | 17 + include/linux/kernfs.h | 8 + include/linux/kthread.h | 4 + include/linux/mmzone.h | 3 + include/linux/page-flags.h | 5 + include/linux/psi.h | 55 ++ include/linux/psi_types.h | 95 +++ include/linux/sched.h | 13 + include/linux/sched/loadavg.h | 24 +- include/linux/swap.h | 1 + include/trace/events/mmflags.h | 1 + init/Kconfig | 28 + kernel/cgroup/cgroup.c | 55 +- kernel/debug/kdb/kdb_main.c | 7 +- kernel/fork.c | 4 + kernel/kthread.c | 3 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 16 +- kernel/sched/loadavg.c | 139 ++-- kernel/sched/psi.c | 823 ++++++++++++++++++++++++ kernel/sched/sched.h | 178 ++--- kernel/sched/stats.h | 86 +++ kernel/workqueue.c | 23 + kernel/workqueue_internal.h | 6 +- mm/compaction.c | 5 + mm/filemap.c | 20 +- mm/huge_memory.c | 1 + mm/memcontrol.c | 2 + mm/migrate.c | 2 + mm/page_alloc.c | 9 + mm/swap_state.c | 1 + mm/vmscan.c | 10 + mm/vmstat.c | 1 + mm/workingset.c | 117 +++- 49 files changed, 1837 insertions(+), 279 deletions(-) create mode 100644 Documentation/accounting/psi.txt create mode 100644 include/linux/psi.h create mode 100644 include/linux/psi_types.h create mode 100644 kernel/sched/psi.c -- 1.8.3.1

1 25

[PATCH openEuler-1.0-LTS] config: update hulk_defconfig
by Yang Yingliang 28 Oct '21

28 Oct '21

hulk inclusion category: bugfix bugzilla: NA CVE: NA --------------------------- enable CONFIG_HISILICON_ERRATUM_1980005 by default for test. set default value of CONFIG_MMC_DW_IDMAC and CONFIG_MMC_DW_HI3XXX. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/hulk_defconfig | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/configs/hulk_defconfig b/arch/arm64/configs/hulk_defconfig index b146c2e2a93dc..01e02aa2cb092 100644 --- a/arch/arm64/configs/hulk_defconfig +++ b/arch/arm64/configs/hulk_defconfig @@ -398,7 +398,7 @@ CONFIG_ARM64_ERRATUM_845719=y # CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set # CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set CONFIG_HISILICON_ERRATUM_161600802=y -# CONFIG_HISILICON_ERRATUM_1980005 is not set +CONFIG_HISILICON_ERRATUM_1980005=y # CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set CONFIG_HISILICON_ERRATUM_HIP08_RU_PREFETCH=y # CONFIG_HISILICON_HIP08_RU_PREFETCH_DEFAULT_OFF is not set @@ -4204,10 +4204,12 @@ CONFIG_MMC_SPI=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m CONFIG_MMC_DW=m +# CONFIG_MMC_DW_IDMAC is not set CONFIG_MMC_DW_PLTFM=m CONFIG_MMC_DW_BLUEFIELD=m # CONFIG_MMC_DW_EXYNOS is not set # CONFIG_MMC_DW_HI3798CV200 is not set +# CONFIG_MMC_DW_HI3XXX is not set # CONFIG_MMC_DW_K3 is not set # CONFIG_MMC_DW_PCI is not set CONFIG_MMC_VUB300=m -- 2.25.1

1 0

[PATCH kernel-4.19 1/4] iommu/arm-smmu: Prevent forced unbinding of Arm SMMU drivers
by Yang Yingliang 28 Oct '21

28 Oct '21

From: Will Deacon <will(a)kernel.org> mainline inclusion from mainline-v5.5-rc1 commit 34debdca68efd5625a2fcea7df1a215591a01f80 category: bugfix bugzilla: 95382 CVE: NA ------------------------------------------------- Forcefully unbinding the Arm SMMU drivers is a pretty dangerous operation, since it will likely lead to catastrophic failure for any DMA devices mastering through the SMMU being unbound. When the driver then attempts to "handle" the fatal faults, it's very easy to trip over dead data structures, leading to use-after-free. On John's machine, he reports that the machine was "unusable" due to loss of the storage controller following a forced unbind of the SMMUv3 driver: | # cd ./bus/platform/drivers/arm-smmu-v3 | # echo arm-smmu-v3.0.auto > unbind | hisi_sas_v2_hw HISI0162:01: CQE_AXI_W_ERR (0x800) found! | platform arm-smmu-v3.0.auto: CMD_SYNC timeout at 0x00000146 | [hwprod 0x00000146, hwcons 0x00000000] Prevent this forced unbinding of the drivers by setting "suppress_bind_attrs" to true. Link: https://lore.kernel.org/lkml/06dfd385-1af0-3106-4cc5-6a5b8e864759@huawei.com Reported-by: John Garry <john.garry(a)huawei.com> Signed-off-by: Will Deacon <will(a)kernel.org> Tested-by: John Garry <john.garry(a)huawei.com> # smmu v3 Reviewed-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Nanyong Sun <sunnanyong(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/arm-smmu-v3.c | 5 +++-- drivers/iommu/arm-smmu.c | 7 ++++--- 2 files changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index c9ff437cb3283..49408e73716e7 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -4532,8 +4532,9 @@ MODULE_DEVICE_TABLE(of, arm_smmu_of_match); static struct platform_driver arm_smmu_driver = { .driver = { - .name = "arm-smmu-v3", - .of_match_table = of_match_ptr(arm_smmu_of_match), + .name = "arm-smmu-v3", + .of_match_table = of_match_ptr(arm_smmu_of_match), + .suppress_bind_attrs = true, }, .probe = arm_smmu_device_probe, .remove = arm_smmu_device_remove, diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index f948de8af412c..2c2bdeac758e0 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -2287,9 +2287,10 @@ static SIMPLE_DEV_PM_OPS(arm_smmu_pm_ops, NULL, arm_smmu_pm_resume); static struct platform_driver arm_smmu_driver = { .driver = { - .name = "arm-smmu", - .of_match_table = of_match_ptr(arm_smmu_of_match), - .pm = &arm_smmu_pm_ops, + .name = "arm-smmu", + .of_match_table = of_match_ptr(arm_smmu_of_match), + .pm = &arm_smmu_pm_ops, + .suppress_bind_attrs = true, }, .probe = arm_smmu_device_probe, .remove = arm_smmu_device_remove, -- 2.25.1

2 4

[PATCH kernel-4.19 v6 00/23] support psi feature
by Liu Xinpeng 28 Oct '21

28 Oct '21

backport psi feature from upstream 5.4 bugzilla: https://gitee.com/openeuler/kernel/issues/I47QS2 Baruch Siach (1): psi: fix reference to kernel commandline enable Dan Schatzberg (1): kernel/sched/psi.c: expose pressure metrics on root cgroup Johannes Weiner (11): sched: loadavg: consolidate LOAD_INT, LOAD_FRAC, CALC_LOAD sched: loadavg: make calc_load_n() public sched: sched.h: make rq locking and clock functions available in stats.h sched: introduce this_rq_lock_irq() psi: pressure stall information for CPU, memory, and IO psi: cgroup support psi: make disabling/enabling easier for vendor kernels psi: fix aggregation idle shut-off psi: avoid divide-by-zero crash inside virtual machines fs: kernfs: add poll file operation sched/psi: Fix sampling error and rare div0 crashes with cgroups and high uptime Josef Bacik (1): blk-iolatency: use a percentile approache for ssd's Liu Xinpeng (2): psi:enable psi in config psi:avoid kabi change Olof Johansson (1): kernel/sched/psi.c: simplify cgroup_move_task() Suren Baghdasaryan (6): psi: introduce state_mask to represent stalled psi states psi: make psi_enable static psi: rename psi fields in preparation for psi trigger addition psi: split update_stats into parts psi: track changed states include/: refactor headers to allow kthread.h inclusion in psi_types.h Documentation/accounting/psi.txt | 73 +++ Documentation/admin-guide/cgroup-v2.rst | 18 + Documentation/admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/powerpc/platforms/cell/cpufreq_spudemand.c | 2 +- arch/powerpc/platforms/cell/spufs/sched.c | 9 +- arch/s390/appldata/appldata_os.c | 4 - arch/x86/configs/openeuler_defconfig | 2 + block/blk-iolatency.c | 183 +++++- drivers/cpuidle/governors/menu.c | 4 - drivers/spi/spi-rockchip.c | 1 + fs/kernfs/file.c | 31 +- fs/proc/loadavg.c | 3 - include/linux/cgroup-defs.h | 12 + include/linux/cgroup.h | 17 + include/linux/kernfs.h | 8 + include/linux/kthread.h | 4 + include/linux/psi.h | 55 ++ include/linux/psi_types.h | 95 +++ include/linux/sched.h | 13 + include/linux/sched/loadavg.h | 24 +- init/Kconfig | 28 + kernel/cgroup/cgroup.c | 55 +- kernel/debug/kdb/kdb_main.c | 7 +- kernel/fork.c | 4 + kernel/kthread.c | 3 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 16 +- kernel/sched/loadavg.c | 139 ++-- kernel/sched/psi.c | 823 ++++++++++++++++++++++++ kernel/sched/sched.h | 178 ++--- kernel/sched/stats.h | 86 +++ kernel/workqueue.c | 23 + kernel/workqueue_internal.h | 6 +- mm/compaction.c | 5 + mm/filemap.c | 11 + mm/page_alloc.c | 9 + mm/vmscan.c | 9 + 38 files changed, 1726 insertions(+), 241 deletions(-) create mode 100644 Documentation/accounting/psi.txt create mode 100644 include/linux/psi.h create mode 100644 include/linux/psi_types.h create mode 100644 kernel/sched/psi.c -- 1.8.3.1

2 24

[PATCH kernel-4.19 1/8] EMMC: ascend customized emmc host
by Yang Yingliang 28 Oct '21

28 Oct '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: feature feature: Ascend emmc adaption bugzilla: https://gitee.com/openeuler/kernel/issues/I4F4LL CVE: NA -------------------- To identify Ascend HiSilicon emmc chip, we add a customized property to dts. In this patch we add an interface to read this property. At the same time, we provided a switch, which is CONFIG_ASCEND_HISI_MMC, for you to get rid of our modifications. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/Kconfig | 10 ++++ drivers/mmc/core/host.c | 43 ++++++++++++--- include/linux/mmc/host.h | 115 +++++++++++++++++++++++++++++++++++++++ include/linux/mmc/pm.h | 1 + 4 files changed, 162 insertions(+), 7 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ec21388311db2..8b29ecadd1862 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -12,6 +12,16 @@ menuconfig MMC If you want MMC/SD/SDIO support, you should say Y here and also to your specific host controller driver. +config ASCEND_HISI_MMC + bool "Ascend HiSilicon MMC card support" + depends on MMC + default n + help + This selects for Hisilicon SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. + You should select this option if you want mmc support on + Ascend platform. + if MMC source "drivers/mmc/core/Kconfig" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index dd1c14d8f6863..b29ee31e7865e 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -348,6 +348,11 @@ int mmc_of_parse(struct mmc_host *host) EXPORT_SYMBOL(mmc_of_parse); +static inline int mmc_is_ascend_hi_mci_1(struct device *dev) +{ + return !strncmp(dev_name(dev), "hi_mci.1", strlen("hi_mci.1")); +} + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -374,7 +379,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) } host->index = err; - + if (mmc_is_ascend_customized(dev)) { + if (mmc_is_ascend_hi_mci_1(dev)) + host->index = 1; + } dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; @@ -383,10 +391,11 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) device_initialize(&host->class_dev); device_enable_async_suspend(&host->class_dev); - if (mmc_gpio_alloc(host)) { - put_device(&host->class_dev); - return NULL; - } + if (!mmc_is_ascend_customized(host->parent)) + if (mmc_gpio_alloc(host)) { + put_device(&host->class_dev); + return NULL; + } spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); @@ -439,7 +448,9 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); - mmc_register_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_register_pm_notifier(host); return 0; } @@ -456,7 +467,9 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { - mmc_unregister_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_unregister_pm_notifier(host); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS @@ -483,3 +496,19 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); + + +int mmc_is_ascend_customized(struct device *dev) +{ +#ifdef CONFIG_ASCEND_HISI_MMC + static int is_ascend_customized = -1; + + if (is_ascend_customized == -1) + is_ascend_customized = ((dev == NULL) ? 0 : + of_find_property(dev->of_node, "customized", NULL) != NULL); + return is_ascend_customized; +#else + return 0; +#endif +} +EXPORT_SYMBOL(mmc_is_ascend_customized); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 7e8e5b20e82b0..2cd5a73ab12a2 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,9 @@ #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/jiffies.h> +#include <linux/version.h> + struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; @@ -63,6 +66,7 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10 +#define MMC_TIMING_NEW_SD MMC_TIMING_UHS_SDR12 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -78,7 +82,25 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_D 3 bool enhanced_strobe; /* hs400es selection */ +#ifdef CONFIG_ASCEND_HISI_MMC + unsigned int clock_store; /*store the clock before power off*/ +#endif +}; + +#ifdef CONFIG_ASCEND_HISI_MMC +struct mmc_cmdq_host_ops { + int (*enable)(struct mmc_host *mmc); + int (*disable)(struct mmc_host *mmc, bool soft); + int (*restore_irqs)(struct mmc_host *mmc); + int (*request)(struct mmc_host *mmc, struct mmc_request *mrq); + int (*halt)(struct mmc_host *mmc, bool halt); + void (*post_req)(struct mmc_host *mmc, struct mmc_request *mrq, + int err); + void (*disable_immediately)(struct mmc_host *mmc); + int (*clear_and_halt)(struct mmc_host *mmc); }; +#endif + struct mmc_host; @@ -168,6 +190,12 @@ struct mmc_host_ops { */ int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); +#ifdef CONFIG_ASCEND_HISI_MMC + /* Slow down clk for ascend chip SD cards */ + void (*slowdown_clk)(struct mmc_host *host, int timing); + int (*enable_enhanced_strobe)(struct mmc_host *host); + int (*send_cmd_direct)(struct mmc_host *host, struct mmc_request *mrq); +#endif }; struct mmc_cqe_ops { @@ -255,6 +283,30 @@ struct mmc_context_info { wait_queue_head_t wait; }; +#ifdef CONFIG_ASCEND_HISI_MMC +/** + * mmc_cmdq_context_info - describes the contexts of cmdq + * @active_reqs requests being processed + * @active_dcmd dcmd in progress, don't issue any + * more dcmd requests + * @rpmb_in_wait do not pull any more reqs till rpmb is handled + * @cmdq_state state of cmdq engine + * @req_starved completion should invoke the request_fn since + * no tags were available + * @cmdq_ctx_lock acquire this before accessing this structure + */ +struct mmc_cmdq_context_info { + unsigned long active_reqs; /* in-flight requests */ + bool active_dcmd; + bool rpmb_in_wait; + unsigned long curr_state; + + /* no free tag available */ + unsigned long req_starved; + spinlock_t cmdq_ctx_lock; +}; +#endif + struct regulator; struct mmc_pwrseq; @@ -328,6 +380,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP_RUNTIME_RESUME (1 << 20) /* Resume at runtime_resume. */ +#endif #define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ MMC_CAP_UHS_DDR50) @@ -368,6 +423,34 @@ struct mmc_host { #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock read don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ +#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ +#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) +#define MMC_CAP2_CMD_QUEUE (1 << 18) /* support eMMC command queue */ +#define MMC_CAP2_ENHANCED_STROBE (1 << 19) +#define MMC_CAP2_CACHE_FLUSH_BARRIER (1 << 20) +/* Allow background operations auto enable control */ +#define MMC_CAP2_BKOPS_AUTO_CTRL (1 << 21) +/* Allow background operations manual enable control */ +#define MMC_CAP2_BKOPS_MANUAL_CTRL (1 << 22) + +/* host is connected by via modem through sdio */ +#define MMC_CAP2_SUPPORT_VIA_MODEM (1 << 26) +/* host is connected by wifi through sdio */ +#define MMC_CAP2_SUPPORT_WIFI (1 << 27) +/* host is connected to 1102 wifi */ +#define MMC_CAP2_SUPPORT_WIFI_CMD11 (1 << 28) +/* host do not support low power for wifi*/ +#define MMC_CAP2_WIFI_NO_LOWPWR (1 << 29) +#endif int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -461,6 +544,12 @@ struct mmc_host { bool cqe_on; unsigned long private[0] ____cacheline_aligned; +#ifdef CONFIG_ASCEND_HISI_MMC + const struct mmc_cmdq_host_ops *cmdq_ops; + int sdio_present; + unsigned int cmdq_slots; + struct mmc_cmdq_context_info cmdq_ctx; +#endif }; struct device_node; @@ -588,4 +677,30 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_abort_tuning(struct mmc_host *host, u32 opcode); +#ifdef CONFIG_ASCEND_HISI_MMC +int mmc_cache_ctrl(struct mmc_host *host, u8 enable); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); +#else +static inline int mmc_cache_ctrl(struct mmc_host *host, u8 enable) +{ + return 0; +} +static inline int mmc_card_awake(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_sleep(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_can_sleep(struct mmc_host *host) +{ + return 0; +} +#endif + +int mmc_is_ascend_customized(struct device *dev); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h index 4a139204c20c0..6e2d6a135c7e0 100644 --- a/include/linux/mmc/pm.h +++ b/include/linux/mmc/pm.h @@ -26,5 +26,6 @@ typedef unsigned int mmc_pm_flag_t; #define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ #define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */ +#define MMC_PM_IGNORE_PM_NOTIFY (1 << 2) /* ignore mmc pm notify */ #endif /* LINUX_MMC_PM_H */ -- 2.25.1

1 7

[PATCH openEuler-1.0-LTS 1/8] EMMC: ascend customized emmc host
by Yang Yingliang 27 Oct '21

27 Oct '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: feature feature: Ascend emmc adaption bugzilla: https://gitee.com/openeuler/kernel/issues/I4F4LL CVE: NA -------------------- To identify Ascend HiSilicon emmc chip, we add a customized property to dts. In this patch we add an interface to read this property. At the same time, we provided a switch, which is CONFIG_ASCEND_HISI_MMC, for you to get rid of our modifications. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/Kconfig | 10 ++++ drivers/mmc/core/host.c | 47 +++++++++++++--- include/linux/mmc/host.h | 115 +++++++++++++++++++++++++++++++++++++++ include/linux/mmc/pm.h | 1 + 4 files changed, 164 insertions(+), 9 deletions(-) diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index ec21388311db2..8b29ecadd1862 100644 --- a/drivers/mmc/Kconfig +++ b/drivers/mmc/Kconfig @@ -12,6 +12,16 @@ menuconfig MMC If you want MMC/SD/SDIO support, you should say Y here and also to your specific host controller driver. +config ASCEND_HISI_MMC + bool "Ascend HiSilicon MMC card support" + depends on MMC + default n + help + This selects for Hisilicon SoC specific extensions to the + Synopsys DesignWare Memory Card Interface driver. + You should select this option if you want mmc support on + Ascend platform. + if MMC source "drivers/mmc/core/Kconfig" diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index f57f5de542064..69cc778706855 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -348,6 +348,11 @@ int mmc_of_parse(struct mmc_host *host) EXPORT_SYMBOL(mmc_of_parse); +static inline int mmc_is_ascend_hi_mci_1(struct device *dev) +{ + return !strncmp(dev_name(dev), "hi_mci.1", strlen("hi_mci.1")); +} + /** * mmc_alloc_host - initialise the per-host structure. * @extra: sizeof private data structure @@ -374,7 +379,10 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) } host->index = err; - + if (mmc_is_ascend_customized(dev)) { + if (mmc_is_ascend_hi_mci_1(dev)) + host->index = 1; + } dev_set_name(&host->class_dev, "mmc%d", host->index); host->parent = dev; @@ -383,12 +391,13 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) device_initialize(&host->class_dev); device_enable_async_suspend(&host->class_dev); - if (mmc_gpio_alloc(host)) { - put_device(&host->class_dev); - ida_simple_remove(&mmc_host_ida, host->index); - kfree(host); - return NULL; - } + if (!mmc_is_ascend_customized(host->parent)) + if (mmc_gpio_alloc(host)) { + put_device(&host->class_dev); + ida_simple_remove(&mmc_host_ida, host->index); + kfree(host); + return NULL; + } spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); @@ -441,7 +450,9 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); - mmc_register_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_register_pm_notifier(host); return 0; } @@ -458,7 +469,9 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { - mmc_unregister_pm_notifier(host); + if (!mmc_is_ascend_customized(host->parent) || + !(host->pm_flags & MMC_PM_IGNORE_PM_NOTIFY)) + mmc_unregister_pm_notifier(host); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS @@ -485,3 +498,19 @@ void mmc_free_host(struct mmc_host *host) } EXPORT_SYMBOL(mmc_free_host); + + +int mmc_is_ascend_customized(struct device *dev) +{ +#ifdef CONFIG_ASCEND_HISI_MMC + static int is_ascend_customized = -1; + + if (is_ascend_customized == -1) + is_ascend_customized = ((dev == NULL) ? 0 : + of_find_property(dev->of_node, "customized", NULL) != NULL); + return is_ascend_customized; +#else + return 0; +#endif +} +EXPORT_SYMBOL(mmc_is_ascend_customized); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 840462ed1ec7e..78b4d0a813b71 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -19,6 +19,9 @@ #include <linux/mmc/pm.h> #include <linux/dma-direction.h> +#include <linux/jiffies.h> +#include <linux/version.h> + struct mmc_ios { unsigned int clock; /* clock rate */ unsigned short vdd; @@ -63,6 +66,7 @@ struct mmc_ios { #define MMC_TIMING_MMC_DDR52 8 #define MMC_TIMING_MMC_HS200 9 #define MMC_TIMING_MMC_HS400 10 +#define MMC_TIMING_NEW_SD MMC_TIMING_UHS_SDR12 unsigned char signal_voltage; /* signalling voltage (1.8V or 3.3V) */ @@ -78,7 +82,25 @@ struct mmc_ios { #define MMC_SET_DRIVER_TYPE_D 3 bool enhanced_strobe; /* hs400es selection */ +#ifdef CONFIG_ASCEND_HISI_MMC + unsigned int clock_store; /*store the clock before power off*/ +#endif +}; + +#ifdef CONFIG_ASCEND_HISI_MMC +struct mmc_cmdq_host_ops { + int (*enable)(struct mmc_host *mmc); + int (*disable)(struct mmc_host *mmc, bool soft); + int (*restore_irqs)(struct mmc_host *mmc); + int (*request)(struct mmc_host *mmc, struct mmc_request *mrq); + int (*halt)(struct mmc_host *mmc, bool halt); + void (*post_req)(struct mmc_host *mmc, struct mmc_request *mrq, + int err); + void (*disable_immediately)(struct mmc_host *mmc); + int (*clear_and_halt)(struct mmc_host *mmc); }; +#endif + struct mmc_host; @@ -168,6 +190,12 @@ struct mmc_host_ops { */ int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); +#ifdef CONFIG_ASCEND_HISI_MMC + /* Slow down clk for ascend chip SD cards */ + void (*slowdown_clk)(struct mmc_host *host, int timing); + int (*enable_enhanced_strobe)(struct mmc_host *host); + int (*send_cmd_direct)(struct mmc_host *host, struct mmc_request *mrq); +#endif }; struct mmc_cqe_ops { @@ -255,6 +283,30 @@ struct mmc_context_info { wait_queue_head_t wait; }; +#ifdef CONFIG_ASCEND_HISI_MMC +/** + * mmc_cmdq_context_info - describes the contexts of cmdq + * @active_reqs requests being processed + * @active_dcmd dcmd in progress, don't issue any + * more dcmd requests + * @rpmb_in_wait do not pull any more reqs till rpmb is handled + * @cmdq_state state of cmdq engine + * @req_starved completion should invoke the request_fn since + * no tags were available + * @cmdq_ctx_lock acquire this before accessing this structure + */ +struct mmc_cmdq_context_info { + unsigned long active_reqs; /* in-flight requests */ + bool active_dcmd; + bool rpmb_in_wait; + unsigned long curr_state; + + /* no free tag available */ + unsigned long req_starved; + spinlock_t cmdq_ctx_lock; +}; +#endif + struct regulator; struct mmc_pwrseq; @@ -328,6 +380,9 @@ struct mmc_host { #define MMC_CAP_UHS_SDR50 (1 << 18) /* Host supports UHS SDR50 mode */ #define MMC_CAP_UHS_SDR104 (1 << 19) /* Host supports UHS SDR104 mode */ #define MMC_CAP_UHS_DDR50 (1 << 20) /* Host supports UHS DDR50 mode */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP_RUNTIME_RESUME (1 << 20) /* Resume at runtime_resume. */ +#endif #define MMC_CAP_UHS (MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25 | \ MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ MMC_CAP_UHS_DDR50) @@ -367,6 +422,34 @@ struct mmc_host { #define MMC_CAP2_CQE (1 << 23) /* Has eMMC command queue engine */ #define MMC_CAP2_CQE_DCMD (1 << 24) /* CQE can issue a direct command */ #define MMC_CAP2_AVOID_3_3V (1 << 25) /* Host must negotiate down from 3.3V */ +#ifdef CONFIG_ASCEND_HISI_MMC +#define MMC_CAP2_CACHE_CTRL (1 << 1) /* Allow cache control */ +#define MMC_CAP2_NO_MULTI_READ (1 << 3) /* Multiblock read don't work */ +#define MMC_CAP2_NO_SLEEP_CMD (1 << 4) /* Don't allow sleep command */ +#define MMC_CAP2_BROKEN_VOLTAGE (1 << 7) /* Use the broken voltage */ +#define MMC_CAP2_DETECT_ON_ERR (1 << 8) /* I/O err check card removal */ +#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */ +#define MMC_CAP2_PACKED_RD (1 << 12) /* Allow packed read */ +#define MMC_CAP2_PACKED_WR (1 << 13) /* Allow packed write */ +#define MMC_CAP2_PACKED_CMD (MMC_CAP2_PACKED_RD | \ + MMC_CAP2_PACKED_WR) +#define MMC_CAP2_CMD_QUEUE (1 << 18) /* support eMMC command queue */ +#define MMC_CAP2_ENHANCED_STROBE (1 << 19) +#define MMC_CAP2_CACHE_FLUSH_BARRIER (1 << 20) +/* Allow background operations auto enable control */ +#define MMC_CAP2_BKOPS_AUTO_CTRL (1 << 21) +/* Allow background operations manual enable control */ +#define MMC_CAP2_BKOPS_MANUAL_CTRL (1 << 22) + +/* host is connected by via modem through sdio */ +#define MMC_CAP2_SUPPORT_VIA_MODEM (1 << 26) +/* host is connected by wifi through sdio */ +#define MMC_CAP2_SUPPORT_WIFI (1 << 27) +/* host is connected to 1102 wifi */ +#define MMC_CAP2_SUPPORT_WIFI_CMD11 (1 << 28) +/* host do not support low power for wifi*/ +#define MMC_CAP2_WIFI_NO_LOWPWR (1 << 29) +#endif int fixed_drv_type; /* fixed driver type for non-removable media */ @@ -460,6 +543,12 @@ struct mmc_host { bool cqe_on; unsigned long private[0] ____cacheline_aligned; +#ifdef CONFIG_ASCEND_HISI_MMC + const struct mmc_cmdq_host_ops *cmdq_ops; + int sdio_present; + unsigned int cmdq_slots; + struct mmc_cmdq_context_info cmdq_ctx; +#endif }; struct device_node; @@ -587,4 +676,30 @@ static inline enum dma_data_direction mmc_get_dma_dir(struct mmc_data *data) int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error); int mmc_abort_tuning(struct mmc_host *host, u32 opcode); +#ifdef CONFIG_ASCEND_HISI_MMC +int mmc_cache_ctrl(struct mmc_host *host, u8 enable); +int mmc_card_awake(struct mmc_host *host); +int mmc_card_sleep(struct mmc_host *host); +int mmc_card_can_sleep(struct mmc_host *host); +#else +static inline int mmc_cache_ctrl(struct mmc_host *host, u8 enable) +{ + return 0; +} +static inline int mmc_card_awake(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_sleep(struct mmc_host *host) +{ + return 0; +} +static inline int mmc_card_can_sleep(struct mmc_host *host) +{ + return 0; +} +#endif + +int mmc_is_ascend_customized(struct device *dev); + #endif /* LINUX_MMC_HOST_H */ diff --git a/include/linux/mmc/pm.h b/include/linux/mmc/pm.h index 4a139204c20c0..6e2d6a135c7e0 100644 --- a/include/linux/mmc/pm.h +++ b/include/linux/mmc/pm.h @@ -26,5 +26,6 @@ typedef unsigned int mmc_pm_flag_t; #define MMC_PM_KEEP_POWER (1 << 0) /* preserve card power during suspend */ #define MMC_PM_WAKE_SDIO_IRQ (1 << 1) /* wake up host system on SDIO IRQ assertion */ +#define MMC_PM_IGNORE_PM_NOTIFY (1 << 2) /* ignore mmc pm notify */ #endif /* LINUX_MMC_PM_H */ -- 2.25.1

1 7