April 2022 - Kernel - mailweb.openeuler.org

[PATCH openEuler-5.10 1/4] swiotlb: fix info leak with DMA_FROM_DEVICE
by Zheng Zengkai 13 Apr '22

13 Apr '22

From: Halil Pasic <pasic(a)linux.ibm.com> mainline inclusion from mainline-v5.17-rc6 commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e category: bugfix bugzilla: 186478, https://gitee.com/src-openeuler/kernel/issues/I503W4 CVE: CVE-2022-0854 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204. A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails. One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved). Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce. Signed-off-by: Halil Pasic <pasic(a)linux.ibm.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Conflicts: kernel/dma/swiotlb.c Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> --- Documentation/core-api/dma-attributes.rst | 8 ++++++++ include/linux/dma-mapping.h | 8 ++++++++ kernel/dma/swiotlb.c | 3 ++- 3 files changed, 18 insertions(+), 1 deletion(-) diff --git a/Documentation/core-api/dma-attributes.rst b/Documentation/core-api/dma-attributes.rst index 1887d92e8e92..17706dc91ec9 100644 --- a/Documentation/core-api/dma-attributes.rst +++ b/Documentation/core-api/dma-attributes.rst @@ -130,3 +130,11 @@ accesses to DMA buffers in both privileged "supervisor" and unprivileged subsystem that the buffer is fully accessible at the elevated privilege level (and ideally inaccessible or at least read-only at the lesser-privileged levels). + +DMA_ATTR_OVERWRITE +------------------ + +This is a hint to the DMA-mapping subsystem that the device is expected to +overwrite the entire mapped size, thus the caller does not require any of the +previous buffer contents to be preserved. This allows bounce-buffering +implementations to optimise DMA_FROM_DEVICE transfers. diff --git a/include/linux/dma-mapping.h b/include/linux/dma-mapping.h index a7d70cdee25e..a9361178c5db 100644 --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -61,6 +61,14 @@ */ #define DMA_ATTR_PRIVILEGED (1UL << 9) +/* + * This is a hint to the DMA-mapping subsystem that the device is expected + * to overwrite the entire mapped size, thus the caller does not require any + * of the previous buffer contents to be preserved. This allows + * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers. + */ +#define DMA_ATTR_OVERWRITE (1UL << 10) + /* * A dma_addr_t can hold any valid DMA or bus address for the platform. It can * be given to a device to use as a DMA source or target. It is specific to a diff --git a/kernel/dma/swiotlb.c b/kernel/dma/swiotlb.c index 0ed0e1f215c7..62b1e5fa8673 100644 --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -598,7 +598,8 @@ phys_addr_t swiotlb_tbl_map_single(struct device *dev, phys_addr_t orig_addr, tlb_addr = slot_addr(io_tlb_start, index) + offset; if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) + (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE || + dir == DMA_BIDIRECTIONAL)) swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE); return tlb_addr; } -- 2.20.1

1 3

[PATCH OLK-5.10] Driver for Zhaoxin CPU core temperature monitoring
by LeoLiuoc 12 Apr '22

12 Apr '22

zhaoxin inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I52DS7 CVE: NA Add support for the temperature sensor inside your CPU. Supported are all known variants of the Zhaoxin processors. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/hwmon/Kconfig | 9 + drivers/hwmon/Makefile | 1 + drivers/hwmon/via-cputemp.c | 1 - drivers/hwmon/zhaoxin-cputemp.c | 292 ++++++++++++++++++++++++++++++++ 4 files changed, 302 insertions(+), 1 deletion(-) create mode 100644 drivers/hwmon/zhaoxin-cputemp.c diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 0c2b032ee617..c11c3c46898a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1889,6 +1889,15 @@ config SENSORS_VIA_CPUTEMP sensor inside your CPU. Supported are all known variants of the VIA C7 and Nano. +config SENSORS_ZHAOXIN_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + select HWMON_VID + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the Zhaoxin processors. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 9db2903b61e5..2427687972c9 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -184,6 +184,7 @@ obj-$(CONFIG_SENSORS_TMP421) += tmp421.o obj-$(CONFIG_SENSORS_TMP513) += tmp513.o obj-$(CONFIG_SENSORS_VEXPRESS) += vexpress-hwmon.o obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o +obj-$(CONFIG_SENSORS_ZHAOXIN_CPUTEMP) += zhaoxin-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index e5d18dac8ee7..0a5057dbe51a 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -273,7 +273,6 @@ static const struct x86_cpu_id __initconst cputemp_ids[] = { X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_A, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_C7_D, NULL), X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 6, X86_CENTAUR_FAM6_NANO, NULL), - X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), {} }; MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); diff --git a/drivers/hwmon/zhaoxin-cputemp.c b/drivers/hwmon/zhaoxin-cputemp.c new file mode 100644 index 000000000000..dcedb51515f0 --- /dev/null +++ b/drivers/hwmon/zhaoxin-cputemp.c @@ -0,0 +1,292 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * zhaoxin-cputemp.c - Driver for Zhaoxin CPU core temperature monitoring + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/hwmon.h> +#include <linux/hwmon-vid.h> +#include <linux/sysfs.h> +#include <linux/hwmon-sysfs.h> +#include <linux/err.h> +#include <linux/mutex.h> +#include <linux/list.h> +#include <linux/platform_device.h> +#include <linux/cpu.h> +#include <asm/msr.h> +#include <asm/processor.h> +#include <asm/cpu_device_id.h> + +#define DRVNAME "zhaoxin_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME }; + +/* Functions declaration */ + +struct zhaoxin_cputemp_data { + struct device *hwmon_dev; + const char *name; + u8 vrm; + u32 id; + u32 msr_temp; + u32 msr_vid; +}; + +/* Sysfs stuff */ + +static ssize_t name_show(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static ssize_t cpu0_vid_show(struct device *dev, struct device_attribute *devattr, char *buf) +{ + struct zhaoxin_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr_vid, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%d\n", vid_from_reg(~edx & 0x7f, data->vrm)); +} + +static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, SHOW_TEMP); +static SENSOR_DEVICE_ATTR_RO(temp1_label, name, SHOW_LABEL); +static SENSOR_DEVICE_ATTR_RO(name, name, SHOW_NAME); + +static struct attribute *zhaoxin_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group zhaoxin_cputemp_group = { + .attrs = zhaoxin_cputemp_attributes, +}; + +/* Optional attributes */ +static DEVICE_ATTR_RO(cpu0_vid); + +static int zhaoxin_cputemp_probe(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data; + int err; + u32 eax, edx; + + data = devm_kzalloc(&pdev->dev, sizeof(struct zhaoxin_cputemp_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->id = pdev->id; + data->name = "zhaoxin_cputemp"; + data->msr_temp = 0x1423; + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr_temp, &eax, &edx); + if (err) { + dev_err(&pdev->dev, "Unable to access TEMPERATURE MSR, giving up\n"); + return err; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + if (err) + return err; + + if (data->msr_vid) + data->vrm = vid_which_vrm(); + + if (data->vrm) { + err = device_create_file(&pdev->dev, &dev_attr_cpu0_vid); + if (err) + goto exit_remove; + } + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", err); + goto exit_remove; + } + + return 0; + +exit_remove: + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return err; +} + +static int zhaoxin_cputemp_remove(struct platform_device *pdev) +{ + struct zhaoxin_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + if (data->vrm) + device_remove_file(&pdev->dev, &dev_attr_cpu0_vid); + sysfs_remove_group(&pdev->dev.kobj, &zhaoxin_cputemp_group); + return 0; +} + +static struct platform_driver zhaoxin_cputemp_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = zhaoxin_cputemp_probe, + .remove = zhaoxin_cputemp_remove, +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int zhaoxin_cputemp_online(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + pr_err("Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + pr_err("Device addition failed (%d)\n", err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +static int zhaoxin_cputemp_down_prep(unsigned int cpu) +{ + struct pdev_entry *p; + + mutex_lock(&pdev_list_mutex); + list_for_each_entry(p, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + mutex_unlock(&pdev_list_mutex); + kfree(p); + return 0; + } + } + mutex_unlock(&pdev_list_mutex); + return 0; +} + +static const struct x86_cpu_id __initconst cputemp_ids[] = { + X86_MATCH_VENDOR_FAM_MODEL(CENTAUR, 7, X86_MODEL_ANY, NULL), + X86_MATCH_VENDOR_FAM_MODEL(ZHAOXIN, 7, X86_MODEL_ANY, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, cputemp_ids); + +static enum cpuhp_state zhaoxin_temp_online; + +static int __init zhaoxin_cputemp_init(void) +{ + int err; + + if (!x86_match_cpu(cputemp_ids)) + return -ENODEV; + + err = platform_driver_register(&zhaoxin_cputemp_driver); + if (err) + goto exit; + + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "hwmon/zhaoxin:online", + zhaoxin_cputemp_online, zhaoxin_cputemp_down_prep); + if (err < 0) + goto exit_driver_unreg; + zhaoxin_temp_online = err; + +#ifndef CONFIG_HOTPLUG_CPU + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_hp_unreg; + } +#endif + return 0; + +#ifndef CONFIG_HOTPLUG_CPU +exit_hp_unreg: + cpuhp_remove_state_nocalls(zhaoxin_temp_online); +#endif +exit_driver_unreg: + platform_driver_unregister(&zhaoxin_cputemp_driver); +exit: + return err; +} + +static void __exit zhaoxin_cputemp_exit(void) +{ + cpuhp_remove_state(zhaoxin_temp_online); + platform_driver_unregister(&zhaoxin_cputemp_driver); +} + +MODULE_DESCRIPTION("Zhaoxin CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(zhaoxin_cputemp_init) +module_exit(zhaoxin_cputemp_exit) -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 01/62] PM: wakeup: simplify the output logic of pm_show_wakelocks()
by Laibin Qiu 12 Apr '22

12 Apr '22

From: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> stable inclusion from linux-4.19.228 commit cf94a8a3ff3d7aa06742f1beb5166fa45ba72122 -------------------------------- commit c9d967b2ce40d71e968eb839f36c936b8a9cf1ea upstream. The buffer handling in pm_show_wakelocks() is tricky, and hopefully correct. Ensure it really is correct by using sysfs_emit_at() which handles all of the tricky string handling logic in a PAGE_SIZE buffer for us automatically as this is a sysfs file being read from. Reviewed-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- kernel/power/wakelock.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-) diff --git a/kernel/power/wakelock.c b/kernel/power/wakelock.c index 4210152e56f0..aad7c8fcb22f 100644 --- a/kernel/power/wakelock.c +++ b/kernel/power/wakelock.c @@ -39,23 +39,19 @@ ssize_t pm_show_wakelocks(char *buf, bool show_active) { struct rb_node *node; struct wakelock *wl; - char *str = buf; - char *end = buf + PAGE_SIZE; + int len = 0; mutex_lock(&wakelocks_lock); for (node = rb_first(&wakelocks_tree); node; node = rb_next(node)) { wl = rb_entry(node, struct wakelock, node); if (wl->ws.active == show_active) - str += scnprintf(str, end - str, "%s ", wl->name); + len += sysfs_emit_at(buf, len, "%s ", wl->name); } - if (str > buf) - str--; - - str += scnprintf(str, end - str, "\n"); + len += sysfs_emit_at(buf, len, "\n"); mutex_unlock(&wakelocks_lock); - return (str - buf); + return len; } #if CONFIG_PM_WAKELOCKS_LIMIT > 0 -- 2.22.0

1 61

[PATCH OLK-5.10] xhci: Fix a logic issue when display Zhaoxin XHCI root hub speed
by LeoLiuoc 11 Apr '22

11 Apr '22

Fix a logic issue when display Zhaoxin XHCI root hub speed. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/usb/host/xhci.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 7f1e5296d0f6..71dcc1ba73ac 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -5261,10 +5261,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) if (XHCI_EXT_PORT_PSIV(xhci->port_caps[j].psi[i]) >= 5) minor_rev = 1; } - if (minor_rev != 1) { - hcd->speed = HCD_USB3; - hcd->self.root_hub->speed = USB_SPEED_SUPER; - } + } + if (minor_rev != 1) { + hcd->speed = HCD_USB3; + hcd->self.root_hub->speed = USB_SPEED_SUPER; } } -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 1/3] printk: Convert a use of sprintf to snprintf in console_unlock
by Laibin Qiu 11 Apr '22

11 Apr '22

From: Nathan Chancellor <natechancellor(a)gmail.com> mainline inclusion from mainline-v5.8-rc1 commit 5661dd95a2958634485bb1a53f90a6ab621d4b0c category: bugfix bugzilla: 91291 CVE: N/A -------------------------------- When CONFIG_PRINTK is disabled (e.g. when building allnoconfig), clang warns: ../kernel/printk/printk.c:2416:10: warning: 'sprintf' will always overflow; destination buffer has size 0, but format string expands to at least 33 [-Wfortify-source] len = sprintf(text, ^ 1 warning generated. It is not wrong; text has a zero size when CONFIG_PRINTK is disabled because LOG_LINE_MAX and PREFIX_MAX are both zero. Change to snprintf so that this case is explicitly handled without any risk of overflow. Link: https://github.com/ClangBuiltLinux/linux/issues/846 Link: https://github.com/llvm/llvm-project/commit/6d485ff455ea2b37fef9e06e426dae6… Link: http://lkml.kernel.org/r/20200130221644.2273-1-natechancellor@gmail.com Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: linux-kernel(a)vger.kernel.org Cc: clang-built-linux(a)googlegroups.com Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky(a)gmail.com> Signed-off-by: Petr Mladek <pmladek(a)suse.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- kernel/printk/printk.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 0fe45941b5c7..c645a7221d0b 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2423,9 +2423,9 @@ void console_unlock(void) printk_safe_enter_irqsave(flags); raw_spin_lock(&logbuf_lock); if (console_seq < log_first_seq) { - len = sprintf(text, - "** %llu printk messages dropped **\n", - log_first_seq - console_seq); + len = snprintf(text, sizeof(text), + "** %llu printk messages dropped **\n", + log_first_seq - console_seq); /* messages are gone, move to first one */ console_seq = log_first_seq; -- 2.22.0

1 2

[PATCH openEuler-22.03-LTS] Fix CWE-404 bug-1
by yan 07 Apr '22

07 Apr '22

Fix CWE-404 bug: Leak of memory or pointers to system resoources

3 3

[PATCH openEuler-5.10 01/28] mm: share_pool: adjust sp_make_share_k2u behavior when coredump
by Zheng Zengkai 07 Apr '22

07 Apr '22

From: Guo Mengqi <guomengqi3(a)huawei.com> ascend inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4MUV2 CVE: NA when k2u is being executed ont the whole sharepool group, and one process coredumps, k2u will skip the coredumped process and continue on the rest processes in the group. Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- mm/share_pool.c | 50 +++++++++++++++++++++++++++++++------------------ 1 file changed, 32 insertions(+), 18 deletions(-) diff --git a/mm/share_pool.c b/mm/share_pool.c index 494a829d6f3a..f18bcd188027 100644 --- a/mm/share_pool.c +++ b/mm/share_pool.c @@ -666,8 +666,25 @@ static unsigned long sp_mmap(struct mm_struct *mm, struct file *file, struct sp_area *spa, unsigned long *populate, unsigned long prot); static void sp_munmap(struct mm_struct *mm, unsigned long addr, unsigned long size); + +#define K2U_NORMAL 0 +#define K2U_COREDUMP 1 + +struct sp_k2u_context { + unsigned long kva; + unsigned long kva_aligned; + unsigned long size; + unsigned long size_aligned; + unsigned long sp_flags; + int state; + int spg_id; + bool to_task; + struct timespec64 start; + struct timespec64 end; +}; + static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, - struct mm_struct *mm, unsigned long prot); + struct mm_struct *mm, unsigned long prot, struct sp_k2u_context *kc); static void free_sp_group_id(int spg_id) { @@ -1313,7 +1330,7 @@ int mg_sp_group_add_task(int pid, unsigned long prot, int spg_id) spin_unlock(&sp_area_lock); if (spa->type == SPA_TYPE_K2SPG && spa->kva) { - addr = sp_remap_kva_to_vma(spa->kva, spa, mm, prot); + addr = sp_remap_kva_to_vma(spa->kva, spa, mm, prot, NULL); if (IS_ERR_VALUE(addr)) pr_warn("add group remap k2u failed %ld\n", addr); @@ -2586,7 +2603,7 @@ static unsigned long __sp_remap_get_pfn(unsigned long kva) /* when called by k2u to group, always make sure rw_lock of spg is down */ static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, - struct mm_struct *mm, unsigned long prot) + struct mm_struct *mm, unsigned long prot, struct sp_k2u_context *kc) { struct vm_area_struct *vma; unsigned long ret_addr; @@ -2598,6 +2615,8 @@ static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, if (unlikely(mm->core_state)) { pr_err("k2u mmap: encountered coredump, abort\n"); ret_addr = -EBUSY; + if (kc) + kc->state = K2U_COREDUMP; goto put_mm; } @@ -2683,7 +2702,7 @@ static void *sp_make_share_kva_to_task(unsigned long kva, unsigned long size, un spa->kva = kva; - uva = (void *)sp_remap_kva_to_vma(kva, spa, current->mm, prot); + uva = (void *)sp_remap_kva_to_vma(kva, spa, current->mm, prot, NULL); __sp_area_drop(spa); if (IS_ERR(uva)) pr_err("remap k2u to task failed %ld\n", PTR_ERR(uva)); @@ -2711,6 +2730,8 @@ static void *sp_make_share_kva_to_spg(unsigned long kva, unsigned long size, struct mm_struct *mm; struct sp_group_node *spg_node; void *uva = ERR_PTR(-ENODEV); + struct sp_k2u_context kc; + unsigned long ret_addr = -ENODEV; down_read(&spg->rw_lock); spa = sp_alloc_area(size, sp_flags, spg, SPA_TYPE_K2SPG, current->tgid); @@ -2725,12 +2746,17 @@ static void *sp_make_share_kva_to_spg(unsigned long kva, unsigned long size, list_for_each_entry(spg_node, &spg->procs, proc_node) { mm = spg_node->master->mm; - uva = (void *)sp_remap_kva_to_vma(kva, spa, mm, spg_node->prot); - if (IS_ERR(uva)) { + kc.state = K2U_NORMAL; + ret_addr = sp_remap_kva_to_vma(kva, spa, mm, spg_node->prot, &kc); + if (IS_ERR_VALUE(ret_addr)) { + if (kc.state == K2U_COREDUMP) + continue; + uva = (void *)ret_addr; pr_err("remap k2u to spg failed %ld\n", PTR_ERR(uva)); __sp_free(spg, spa->va_start, spa_size(spa), mm); goto out; } + uva = (void *)ret_addr; } out: @@ -2755,18 +2781,6 @@ static bool vmalloc_area_set_flag(unsigned long kva, unsigned long flags) return false; } -struct sp_k2u_context { - unsigned long kva; - unsigned long kva_aligned; - unsigned long size; - unsigned long size_aligned; - unsigned long sp_flags; - int spg_id; - bool to_task; - struct timespec64 start; - struct timespec64 end; -}; - static void trace_sp_k2u_begin(struct sp_k2u_context *kc) { if (!sysctl_sp_perf_k2u) -- 2.20.1

1 27

openEuler开发者大会Kernel SIG工作会议议题征集
by tangjiayuan 06 Apr '22

06 Apr '22

大家好，openEuler开发者大会Kernel SIG工作会议将在4月14日下午进行。诚邀大家参加，并在此征集议题。议题内容不限于需求讨论、社区治理，问题反馈等。如有议题申报请在如下链接填写： https://etherpad.openeuler.org/p/sig-kernel-22.09-planning 谢谢大家的支持。

1 0

[PATCH] scripts: switch explicitly to Python 3
by Yi Li 06 Apr '22

06 Apr '22

From: Yi Li <yili(a)winhong.com> Some distributions are about to switch to Python 3 support only. This means that /usr/bin/python, which is Python 2, is not available anymore. Hence, switch scripts to use Python 3 explicitly. *** ERROR: ambiguous python shebang in ***/power/pm-graph/sleepgraph.py: #!/usr/bin/python. Change it to python3 (or python2) explicitly. *** ERROR: ambiguous python shebang in ***/power/pm-graph/bootgraph.py: #!/usr/bin/python. Change it to python3 (or python2) explicitly. *** ERROR: ambiguous python shebang in ***/intel_pstate_tracer.py: #!/usr/bin/env python. Change it to python3 (or python2) explicitly. use sed command fix all python files. Signed-off-by: Yi Li <yili(a)winhong.com> --- Documentation/networking/device_drivers/atm/cxacru-cf.py | 2 +- Documentation/sphinx/maintainers_include.py | 2 +- Documentation/target/tcm_mod_builder.py | 2 +- Documentation/trace/postprocess/decode_msr.py | 2 +- arch/ia64/scripts/unwcheck.py | 2 +- drivers/staging/greybus/tools/lbtest | 2 +- scripts/jobserver-exec | 2 +- scripts/show_delta | 2 +- scripts/spdxcheck.py | 2 +- scripts/tracing/draw_functrace.py | 2 +- tools/hv/lsvmbus | 2 +- tools/perf/python/tracepoint.py | 2 +- tools/perf/python/twatch.py | 2 +- tools/perf/scripts/python/exported-sql-viewer.py | 2 +- tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py | 2 +- .../selftests/drivers/net/mlxsw/sharedbuffer_configuration.py | 2 +- 16 files changed, 16 insertions(+), 16 deletions(-) diff --git a/Documentation/networking/device_drivers/atm/cxacru-cf.py b/Documentation/networking/device_drivers/atm/cxacru-cf.py index b41d298398c8..1b960fb45982 100644 --- a/Documentation/networking/device_drivers/atm/cxacru-cf.py +++ b/Documentation/networking/device_drivers/atm/cxacru-cf.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # Copyright 2009 Simon Arlott # # This program is free software; you can redistribute it and/or modify it diff --git a/Documentation/sphinx/maintainers_include.py b/Documentation/sphinx/maintainers_include.py index dc8fed48d3c2..5b7cb116886b 100755 --- a/Documentation/sphinx/maintainers_include.py +++ b/Documentation/sphinx/maintainers_include.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 # -*- coding: utf-8; mode: python -*- # pylint: disable=R0903, C0330, R0914, R0912, E0401 diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index 54492aa813b9..92b740465e73 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # The TCM v4 multi-protocol fabric module generation script for drivers/target/$NEW_MOD # # Copyright (c) 2010 Rising Tide Systems diff --git a/Documentation/trace/postprocess/decode_msr.py b/Documentation/trace/postprocess/decode_msr.py index aa9cc7abd5c2..009122b700a6 100644 --- a/Documentation/trace/postprocess/decode_msr.py +++ b/Documentation/trace/postprocess/decode_msr.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # add symbolic names to read_msr / write_msr in trace # decode_msr msr-index.h < trace import sys diff --git a/arch/ia64/scripts/unwcheck.py b/arch/ia64/scripts/unwcheck.py index bfd1b671e35f..9581742f0db2 100644 --- a/arch/ia64/scripts/unwcheck.py +++ b/arch/ia64/scripts/unwcheck.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 # # Usage: unwcheck.py FILE diff --git a/drivers/staging/greybus/tools/lbtest b/drivers/staging/greybus/tools/lbtest index 47c481239e98..4e6fcfbd815a 100755 --- a/drivers/staging/greybus/tools/lbtest +++ b/drivers/staging/greybus/tools/lbtest @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: BSD-3-Clause # Copyright (c) 2015 Google, Inc. diff --git a/scripts/jobserver-exec b/scripts/jobserver-exec index 0fdb31a790a8..48d141e3ec56 100755 --- a/scripts/jobserver-exec +++ b/scripts/jobserver-exec @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0+ # # This determines how many parallel tasks "make" is expecting, as it is diff --git a/scripts/show_delta b/scripts/show_delta index 28e67e178194..4660a988b2ad 100755 --- a/scripts/show_delta +++ b/scripts/show_delta @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only # # show_deltas: Read list of printk messages instrumented with diff --git a/scripts/spdxcheck.py b/scripts/spdxcheck.py index bc87200f9c7c..cbdb5c83c08f 100755 --- a/scripts/spdxcheck.py +++ b/scripts/spdxcheck.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 # Copyright Thomas Gleixner <tglx(a)linutronix.de> diff --git a/scripts/tracing/draw_functrace.py b/scripts/tracing/draw_functrace.py index 7011fbe003ff..025a5c8106a6 100755 --- a/scripts/tracing/draw_functrace.py +++ b/scripts/tracing/draw_functrace.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only """ diff --git a/tools/hv/lsvmbus b/tools/hv/lsvmbus index 099f2c44dbed..f83698f14da2 100644 --- a/tools/hv/lsvmbus +++ b/tools/hv/lsvmbus @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 import os diff --git a/tools/perf/python/tracepoint.py b/tools/perf/python/tracepoint.py index 461848c7f57d..640c740f460a 100755 --- a/tools/perf/python/tracepoint.py +++ b/tools/perf/python/tracepoint.py @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 # -*- python -*- # -*- coding: utf-8 -*- diff --git a/tools/perf/python/twatch.py b/tools/perf/python/twatch.py index 04f3db29b9bc..56ed003a1d97 100755 --- a/tools/perf/python/twatch.py +++ b/tools/perf/python/twatch.py @@ -1,4 +1,4 @@ -#! /usr/bin/env python +#! /usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only # -*- python -*- # -*- coding: utf-8 -*- diff --git a/tools/perf/scripts/python/exported-sql-viewer.py b/tools/perf/scripts/python/exported-sql-viewer.py index 711d4f9f5645..2768fc8f6141 100755 --- a/tools/perf/scripts/python/exported-sql-viewer.py +++ b/tools/perf/scripts/python/exported-sql-viewer.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 # exported-sql-viewer.py: view data from sql database # Copyright (c) 2014-2018, Intel Corporation. diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py index e15e20696d17..a14953f61e5d 100755 --- a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py +++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0-only # -*- coding: utf-8 -*- # diff --git a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py index 2223337eed0c..bdacd8eb00f3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py +++ b/tools/testing/selftests/drivers/net/mlxsw/sharedbuffer_configuration.py @@ -1,4 +1,4 @@ -#!/usr/bin/env python +#!/usr/bin/env python3 # SPDX-License-Identifier: GPL-2.0 import subprocess -- 2.25.3

3 4

[PATCH openEuler-1.0-LTS] serial: 8250: Fix max baud limit in generic 8250 port
by Laibin Qiu 02 Apr '22

02 Apr '22

From: Serge Semin <Sergey.Semin(a)baikalelectronics.ru> stable inclusion from linux-4.19.130 commit 0eeaf62981ecc79e8395ca8caa1570eaf3a12257 category: bugfix bugzilla: 89545 CVE: N/A ------------------------------------------------ [ Upstream commit 7b668c064ec33f3d687c3a413d05e355172e6c92 ] Standard 8250 UART ports are designed in a way so they can communicate with baud rates up to 1/16 of a reference frequency. It's expected from most of the currently supported UART controllers. That's why the former version of serial8250_get_baud_rate() method called uart_get_baud_rate() with min and max baud rates passed as (port->uartclk / 16 / UART_DIV_MAX) and ((port->uartclk + tolerance) / 16) respectively. Doing otherwise, like it was suggested in commit ("serial: 8250_mtk: support big baud rate."), caused acceptance of bauds, which was higher than the normal UART controllers actually supported. As a result if some user-space program requested to set a baud greater than (uartclk / 16) it would have been permitted without truncation, but then serial8250_get_divisor(baud) (which calls uart_get_divisor() to get the reference clock divisor) would have returned a zero divisor. Setting zero divisor will cause an unpredictable effect varying from chip to chip. In case of DW APB UART the communications just stop. Lets fix this problem by getting back the limitation of (uartclk + tolerance) / 16 maximum baud supported by the generic 8250 port. Mediatek 8250 UART ports driver developer shouldn't have touched it in the first place notably seeing he already provided a custom version of set_termios() callback in that glue-driver which took into account the extended baud rate values and accordingly updated the standard and vendor-specific divisor latch registers anyway. Fixes: 81bb549fdf14 ("serial: 8250_mtk: support big baud rate.") Signed-off-by: Serge Semin <Sergey.Semin(a)baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov(a)baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend(a)alpha.franken.de> Cc: Paul Burton <paulburton(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Long Cheng <long.cheng(a)mediatek.com> Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Maxime Ripard <mripard(a)kernel.org> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Will Deacon <will(a)kernel.org> Cc: Russell King <linux(a)armlinux.org.uk> Cc: linux-mips(a)vger.kernel.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-mediatek(a)lists.infradead.org Link: https://lore.kernel.org/r/20200506233136.11842-2-Sergey.Semin@baikalelectro… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- drivers/tty/serial/8250/8250_port.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 1867c2546cd9..3a0604b025e9 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -2647,6 +2647,8 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, struct ktermios *termios, struct ktermios *old) { + unsigned int tolerance = port->uartclk / 100; + /* * Ask the core to calculate the divisor for us. * Allow 1% tolerance at the upper limit so uart clks marginally @@ -2655,7 +2657,7 @@ static unsigned int serial8250_get_baud_rate(struct uart_port *port, */ return uart_get_baud_rate(port, termios, old, port->uartclk / 16 / UART_DIV_MAX, - port->uartclk); + (port->uartclk + tolerance) / 16); } void -- 2.22.0

1 0

2024

2023

2022

2021

2020

2019

Kernel April 2022