June 2023 - Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
by Chen Jiahao 29 Jun '23

29 Jun '23

From: Takashi Iwai <tiwai(a)suse.de> mainline inclusion from mainline-v6.4-rc3 commit b8c75e4a1b325ea0a9433fa8834be97b5836b946 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6YKXB CVE: CVE-2023-31084 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Using a semaphore in the wait_event*() condition is no good idea. It hits a kernel WARN_ON() at prepare_to_wait_event() like: do not call blocking ops when !TASK_RUNNING; state=1 set at prepare_to_wait_event+0x6d/0x690 For avoiding the potential deadlock, rewrite to an open-coded loop instead. Unlike the loop in wait_event*(), this uses wait_woken() after the condition check, hence the task state stays consistent. CVE-2023-31084 was assigned to this bug. Link: https://lore.kernel.org/r/CA+UBctCu7fXn4q41O_3=id1+OdyQ85tZY1x+TkT-6OVBL6KA… Link: https://lore.kernel.org/linux-media/20230512151800.1874-1-tiwai@suse.de Reported-by: Yu Hao <yhao016(a)ucr.edu> Closes: https://nvd.nist.gov/vuln/detail/CVE-2023-31084 Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Chen Jiahao <chenjiahao16(a)huawei.com> --- drivers/media/dvb-core/dvb_frontend.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index 06ea30a689d7..579cddec55e5 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -292,14 +292,22 @@ static int dvb_frontend_get_event(struct dvb_frontend *fe, } if (events->eventw == events->eventr) { - int ret; + struct wait_queue_entry wait; + int ret = 0; if (flags & O_NONBLOCK) return -EWOULDBLOCK; - ret = wait_event_interruptible(events->wait_queue, - dvb_frontend_test_event(fepriv, events)); - + init_waitqueue_entry(&wait, current); + add_wait_queue(&events->wait_queue, &wait); + while (!dvb_frontend_test_event(fepriv, events)) { + wait_woken(&wait, TASK_INTERRUPTIBLE, 0); + if (signal_pending(current)) { + ret = -ERESTARTSYS; + break; + } + } + remove_wait_queue(&events->wait_queue, &wait); if (ret < 0) return ret; } -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS 1/2] scsi: hisi_sas: Fix normally completed I/O analysed as failed
by Yongqiang Liu 29 Jun '23

29 Jun '23

From: Xingui Yang <yangxingui(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7GS2V CVE: NA ------------------------------------------------------------------- pio read command has no response frame and the struct iu[1024] won't be filled, and it's found that I/Os that are normally completed will be analysed as failed in sas_ata_task_done() when iu contain abnormal dirty data. So ending_fis should not be filled by iu when the response frame hasn't been written to the memory. Fixes: d380f55503ed ("scsi: hisi_sas: Don't bother clearing status buffer IU in task prep") Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> Reviewed-by: Xiang Chen <chenxiang66(a)hisilicon.com> Reviewed-by: kang fenglong <kangfenglong(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 23 ++++++++++++++++------- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 23 +++++++++++++++-------- 2 files changed, 31 insertions(+), 15 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 2df70c4873f5..f9867176fa14 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -2033,6 +2033,11 @@ static void slot_err_v2_hw(struct hisi_hba *hisi_hba, u16 dma_tx_err_type = cpu_to_le16(err_record->dma_tx_err_type); u16 sipc_rx_err_type = cpu_to_le16(err_record->sipc_rx_err_type); u32 dma_rx_err_type = cpu_to_le32(err_record->dma_rx_err_type); + struct hisi_sas_complete_v2_hdr *complete_queue = + hisi_hba->complete_hdr[slot->cmplt_queue]; + struct hisi_sas_complete_v2_hdr *complete_hdr = + &complete_queue[slot->cmplt_queue_slot]; + u32 dw0 = le32_to_cpu(complete_hdr->dw0); int error = -1; if (err_phase == 1) { @@ -2318,7 +2323,8 @@ static void slot_err_v2_hw(struct hisi_hba *hisi_hba, break; } } - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); } break; default: @@ -2342,6 +2348,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) &complete_queue[slot->cmplt_queue_slot]; unsigned long flags; bool is_internal = slot->is_internal; + u32 dw0; if (unlikely(!task || !task->lldd_task || !task->dev)) return -EINVAL; @@ -2366,7 +2373,8 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) } /* Use SAS+TMF status codes */ - switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK) + dw0 = le32_to_cpu(complete_hdr->dw0); + switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >> CMPLT_HDR_ABORT_STAT_OFF) { case STAT_IO_ABORTED: /* this io has been aborted by abort command */ @@ -2392,9 +2400,9 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) break; } - if ((complete_hdr->dw0 & CMPLT_HDR_ERX_MSK) && - (!(complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) { - u32 err_phase = (complete_hdr->dw0 & CMPLT_HDR_ERR_PHASE_MSK) + if ((dw0 & CMPLT_HDR_ERX_MSK) && + (!(dw0 & CMPLT_HDR_RSPNS_XFRD_MSK))) { + u32 err_phase = (dw0 & CMPLT_HDR_ERR_PHASE_MSK) >> CMPLT_HDR_ERR_PHASE_OFF; u32 *error_info = hisi_sas_status_buf_addr_mem(slot); @@ -2409,7 +2417,7 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) "CQ hdr: 0x%x 0x%x 0x%x 0x%x " "Error info: 0x%x 0x%x 0x%x 0x%x\n", slot->idx, task, sas_dev->device_id, - complete_hdr->dw0, complete_hdr->dw1, + dw0, complete_hdr->dw1, complete_hdr->act, complete_hdr->dw3, error_info[0], error_info[1], error_info[2], error_info[3]); @@ -2456,7 +2464,8 @@ slot_complete_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: { ts->stat = SAM_STAT_GOOD; - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; } default: diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 5e2488fd2466..f79060fca001 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2353,7 +2353,8 @@ slot_err_v3_hw(struct hisi_hba *hisi_hba, struct sas_task *task, ts->stat = SAS_OPEN_REJECT; ts->open_rej_reason = SAS_OREJ_RSVD_RETRY; } - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; case SAS_PROTOCOL_SMP: ts->stat = SAM_STAT_CHECK_CONDITION; @@ -2402,6 +2403,7 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) &complete_queue[slot->cmplt_queue_slot]; unsigned long flags; bool is_internal = slot->is_internal; + u32 dw0, dw1, dw3; if (unlikely(!task || !task->lldd_task || !task->dev)) return -EINVAL; @@ -2425,10 +2427,14 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) goto out; } + dw0 = le32_to_cpu(complete_hdr->dw0); + dw1 = le32_to_cpu(complete_hdr->dw1); + dw3 = le32_to_cpu(complete_hdr->dw3); + /* * Use SAS+TMF status codes */ - switch ((complete_hdr->dw0 & CMPLT_HDR_ABORT_STAT_MSK) + switch ((dw0 & CMPLT_HDR_ABORT_STAT_MSK) >> CMPLT_HDR_ABORT_STAT_OFF) { case STAT_IO_ABORTED: /* this IO has been aborted by abort command */ @@ -2452,9 +2458,9 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) } /* check for erroneous completion, 0x3 means abnormal */ - if ((complete_hdr->dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) { + if ((dw0 & CMPLT_HDR_CMPLT_MSK) == 0x3) { u32 *error_info = hisi_sas_status_buf_addr_mem(slot); - u32 device_id = (complete_hdr->dw1 & 0xffff0000) >> 16; + u32 device_id = (dw1 & 0xffff0000) >> 16; struct hisi_sas_itct *itct = &hisi_hba->itct[device_id]; set_aborted_iptt(hisi_hba, slot); @@ -2464,12 +2470,12 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) "Error info: 0x%x 0x%x 0x%x 0x%x\n", slot->idx, task, sas_dev->device_id, itct->sas_addr, - complete_hdr->dw0, complete_hdr->dw1, - complete_hdr->act, complete_hdr->dw3, + dw0, dw1, + complete_hdr->act, dw3, error_info[0], error_info[1], error_info[2], error_info[3]); - if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && + if ((dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && (task->task_proto & SAS_PROTOCOL_SATA || task->task_proto & SAS_PROTOCOL_STP)) { struct hisi_sas_status_buffer *status_buf = @@ -2559,7 +2565,8 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) case SAS_PROTOCOL_STP: case SAS_PROTOCOL_SATA | SAS_PROTOCOL_STP: ts->stat = SAM_STAT_GOOD; - hisi_sas_sata_done(task, slot); + if (dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) + hisi_sas_sata_done(task, slot); break; default: ts->stat = SAM_STAT_CHECK_CONDITION; -- 2.25.1

1 1

[PATCH OLK-5.10] arm64: Add AMPERE1 to the Spectre-BHB affected list
by Lin Yujun 29 Jun '23

29 Jun '23

From: D Scott Phillips <scott(a)os.amperecomputing.com> stable inclusion from stable-v5.10.153 commit 52a43b82006dc88f996bd06da5a3fcfef85220c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I64YCA CVE: CVE-2023-3006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ] Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of speculative execution across software contexts," the AMPERE1 core needs the bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of 11. Signed-off-by: D Scott Phillips <scott(a)os.amperecomputing.com> Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.… Reviewed-by: James Morse <james.morse(a)arm.com> Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> conflicts: arch/arm64/include/asm/cputype.h Signed-off-by: Lin Yujun <linyujun809(a)huawei.com> --- arch/arm64/include/asm/cputype.h | 4 ++++ arch/arm64/kernel/proton-pack.c | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 662708c56397..812781fba3f9 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -61,6 +61,7 @@ #define ARM_CPU_IMP_HISI 0x48 #define ARM_CPU_IMP_PHYTIUM 0x70 #define ARM_CPU_IMP_APPLE 0x61 +#define ARM_CPU_IMP_AMPERE 0xC0 #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 @@ -120,6 +121,8 @@ #define APPLE_CPU_PART_M1_ICESTORM 0x022 #define APPLE_CPU_PART_M1_FIRESTORM 0x023 +#define AMPERE_CPU_PART_AMPERE1 0xAC3 + #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) @@ -165,6 +168,7 @@ #define MIDR_FT_2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2500) #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM) #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM) +#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ #define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index e807f77737e0..9c95d4955b6e 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -873,6 +873,10 @@ u8 spectre_bhb_loop_affected(int scope) MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1), {}, }; + static const struct midr_range spectre_bhb_k11_list[] = { + MIDR_ALL_VERSIONS(MIDR_AMPERE1), + {}, + }; static const struct midr_range spectre_bhb_k8_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), @@ -883,6 +887,8 @@ u8 spectre_bhb_loop_affected(int scope) k = 32; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list)) k = 24; + else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list)) + k = 11; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list)) k = 8; -- 2.34.1

1 0

[PATCH openEuler-22.03-LTS] arm64: Add AMPERE1 to the Spectre-BHB affected list
by Lin Yujun 29 Jun '23

29 Jun '23

From: D Scott Phillips <scott(a)os.amperecomputing.com> stable inclusion from stable-v5.10.153 commit 52a43b82006dc88f996bd06da5a3fcfef85220c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I64YCA CVE: CVE-2023-3006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 0e5d5ae837c8ce04d2ddb874ec5f920118bd9d31 ] Per AmpereOne erratum AC03_CPU_12, "Branch history may allow control of speculative execution across software contexts," the AMPERE1 core needs the bhb clearing loop to mitigate Spectre-BHB, with a loop iteration count of 11. Signed-off-by: D Scott Phillips <scott(a)os.amperecomputing.com> Link: https://lore.kernel.org/r/20221011022140.432370-1-scott@os.amperecomputing.… Reviewed-by: James Morse <james.morse(a)arm.com> Signed-off-by: Catalin Marinas <catalin.marinas(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> conflicts: arch/arm64/include/asm/cputype.h Signed-off-by: Lin Yujun <linyujun809(a)huawei.com> --- arch/arm64/include/asm/cputype.h | 4 ++++ arch/arm64/kernel/proton-pack.c | 6 ++++++ 2 files changed, 10 insertions(+) diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 662708c56397..812781fba3f9 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -61,6 +61,7 @@ #define ARM_CPU_IMP_HISI 0x48 #define ARM_CPU_IMP_PHYTIUM 0x70 #define ARM_CPU_IMP_APPLE 0x61 +#define ARM_CPU_IMP_AMPERE 0xC0 #define ARM_CPU_PART_AEM_V8 0xD0F #define ARM_CPU_PART_FOUNDATION 0xD00 @@ -120,6 +121,8 @@ #define APPLE_CPU_PART_M1_ICESTORM 0x022 #define APPLE_CPU_PART_M1_FIRESTORM 0x023 +#define AMPERE_CPU_PART_AMPERE1 0xAC3 + #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) #define MIDR_CORTEX_A72 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A72) @@ -165,6 +168,7 @@ #define MIDR_FT_2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2500) #define MIDR_APPLE_M1_ICESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_ICESTORM) #define MIDR_APPLE_M1_FIRESTORM MIDR_CPU_MODEL(ARM_CPU_IMP_APPLE, APPLE_CPU_PART_M1_FIRESTORM) +#define MIDR_AMPERE1 MIDR_CPU_MODEL(ARM_CPU_IMP_AMPERE, AMPERE_CPU_PART_AMPERE1) /* Fujitsu Erratum 010001 affects A64FX 1.0 and 1.1, (v0r0 and v1r0) */ #define MIDR_FUJITSU_ERRATUM_010001 MIDR_FUJITSU_A64FX diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c index e807f77737e0..9c95d4955b6e 100644 --- a/arch/arm64/kernel/proton-pack.c +++ b/arch/arm64/kernel/proton-pack.c @@ -873,6 +873,10 @@ u8 spectre_bhb_loop_affected(int scope) MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1), {}, }; + static const struct midr_range spectre_bhb_k11_list[] = { + MIDR_ALL_VERSIONS(MIDR_AMPERE1), + {}, + }; static const struct midr_range spectre_bhb_k8_list[] = { MIDR_ALL_VERSIONS(MIDR_CORTEX_A72), MIDR_ALL_VERSIONS(MIDR_CORTEX_A57), @@ -883,6 +887,8 @@ u8 spectre_bhb_loop_affected(int scope) k = 32; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k24_list)) k = 24; + else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k11_list)) + k = 11; else if (is_midr_in_range_list(read_cpuid_id(), spectre_bhb_k8_list)) k = 8; -- 2.34.1

1 0

[PATCH openEuler-1.0-LTS] drm/msm/dpu: Add check for pstates
by Yongqiang Liu 29 Jun '23

29 Jun '23

From: Xia Fukun <xiafukun(a)huawei.com> stable inclusion from stable-v4.19.287 commit c746a0b9210cebb29511f01d2becf240408327bf category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F2UT CVE: CVE-2023-3220 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ] As kzalloc may fail and return NULL pointer, it should be better to check pstates in order to avoid the NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk(a)quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514160/ Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Reviewed-by: zheng zucheng <zhengzucheng(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index 4752f08f0884..5852e1d356e1 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -1477,6 +1477,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, } pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL); + if (!pstates) + return -ENOMEM; dpu_crtc = to_dpu_crtc(crtc); cstate = to_dpu_crtc_state(state); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
by Yongqiang Liu 28 Jun '23

28 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.4-rc1 commit 2b947f8769be8b8181dc795fd292d3e7120f5204 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDYS CVE: CVE-2023-35828 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> Reviewed-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index a5254e82d628..3cbb372db432 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2477,6 +2477,7 @@ static int renesas_usb3_remove(struct platform_device *pdev) debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); + cancel_work_sync(&usb3->role_work); usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); -- 2.25.1

1 0

[PATCH OLK-5.10] mm: shmem: Fix UAF bug in shmem_show_options()
by Tu Jinjiang 28 Jun '23

28 Jun '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I78SU1 CVE: NA ------------------------------------------- shmem_show_options() uses sbinfo->mpol without adding it's refcnt. This may lead to race with replacement of the mpol by remount. The execution sequence is as follows. CPU0 CPU1 shmem_show_options() shmem_reconfigure() shmem_show_mpol(seq, sbinfo->mpol) mpol = sbinfo->mpol mpol_put(mpol) mpol->mode The KASAN report is as follows. BUG: KASAN: slab-use-after-free in shmem_show_options+0x21b/0x340 Read of size 2 at addr ffff888124324004 by task mount/2388 Call Trace: <TASK> dump_stack_lvl+0x37/0x50 print_report+0xd0/0x620 ? shmem_show_options+0x21b/0x340 ? __virt_addr_valid+0xf4/0x180 ? shmem_show_options+0x21b/0x340 kasan_report+0xb8/0xe0 ? shmem_show_options+0x21b/0x340 shmem_show_options+0x21b/0x340 ? __pfx_shmem_show_options+0x10/0x10 ? strchr+0x2c/0x50 ? strlen+0x23/0x40 ? seq_puts+0x7d/0x90 show_vfsmnt+0x1e6/0x260 ? __pfx_show_vfsmnt+0x10/0x10 ? __kasan_kmalloc+0x7f/0x90 seq_read_iter+0x57a/0x740 vfs_read+0x2e2/0x4a0 ? __pfx_vfs_read+0x10/0x10 ? down_write_killable+0xb8/0x140 ? __pfx_down_write_killable+0x10/0x10 ? __fget_light+0xa9/0x1e0 ? up_write+0x3f/0x80 ksys_read+0xb8/0x150 ? __pfx_ksys_read+0x10/0x10 ? fpregs_assert_state_consistent+0x55/0x60 ? exit_to_user_mode_prepare+0x2d/0x120 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc </TASK> Allocated by task 2387: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x59/0x70 kmem_cache_alloc+0xdd/0x220 mpol_new+0x83/0x150 mpol_parse_str+0x280/0x4a0 shmem_parse_one+0x364/0x520 vfs_parse_fs_param+0xf8/0x1a0 vfs_parse_fs_string+0xc9/0x130 shmem_parse_options+0xb2/0x110 path_mount+0x597/0xdf0 do_mount+0xcd/0xf0 __x64_sys_mount+0xbd/0x100 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 2389: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 kmem_cache_free+0x9c/0x350 shmem_reconfigure+0x278/0x370 reconfigure_super+0x383/0x450 path_mount+0xcc5/0xdf0 do_mount+0xcd/0xf0 __x64_sys_mount+0xbd/0x100 do_syscall_64+0x3c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc The buggy address belongs to the object at ffff888124324000 which belongs to the cache numa_policy of size 32 The buggy address is located 4 bytes inside of freed 32-byte region [ffff888124324000, ffff888124324020) ================================================================== To fix the bug, shmem_get_sbmpol() / mpol_put() needs to be called before / after shmem_show_mpol() call. Signed-off-by: Tu Jinjiang <tujinjiang(a)huawei.com> --- mm/shmem.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/mm/shmem.c b/mm/shmem.c index f7caf1dec81c..93c4a3de558d 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -3637,6 +3637,7 @@ static int shmem_reconfigure(struct fs_context *fc) static int shmem_show_options(struct seq_file *seq, struct dentry *root) { struct shmem_sb_info *sbinfo = SHMEM_SB(root->d_sb); + struct mempolicy *mpol; if (sbinfo->max_blocks != shmem_default_max_blocks()) seq_printf(seq, ",size=%luk", @@ -3679,7 +3680,9 @@ static int shmem_show_options(struct seq_file *seq, struct dentry *root) if (sbinfo->huge) seq_printf(seq, ",huge=%s", shmem_format_huge(sbinfo->huge)); #endif - shmem_show_mpol(seq, sbinfo->mpol); + mpol = shmem_get_sbmpol(sbinfo); + shmem_show_mpol(seq, mpol); + mpol_put(mpol); return 0; } -- 2.25.1

2 1

[PATCH OLK-5.10] drm/msm/dpu: Add check for pstates
by Xia Fukun 28 Jun '23

28 Jun '23

stable inclusion from stable-v5.10.173 commit e9743b3052e125c44b555f07f2876a4bdccfd983 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7F2UT CVE: CVE-2023-3220 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 93340e10b9c5fc86730d149636e0aa8b47bb5a34 ] As kzalloc may fail and return NULL pointer, it should be better to check pstates in order to avoid the NULL pointer dereference. Fixes: 25fdd5933e4c ("drm/msm: Add SDM845 DPU support") Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Reviewed-by: Abhinav Kumar <quic_abhinavk(a)quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/514160/ Link: https://lore.kernel.org/r/20221206080236.43687-1-jiasheng@iscas.ac.cn Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c index f56414a06ec4..9bc4a1cd9ac6 100644 --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c @@ -831,6 +831,8 @@ static int dpu_crtc_atomic_check(struct drm_crtc *crtc, struct drm_rect crtc_rect = { 0 }; pstates = kzalloc(sizeof(*pstates) * DPU_STAGE_MAX * 4, GFP_KERNEL); + if (!pstates) + return -ENOMEM; if (!state->enable || !state->active) { DPU_DEBUG("crtc%d -> enable %d, active %d, skip atomic_check\n", -- 2.17.1

2 1

openEuler Kernel SIG 双周例会
by openEuler conference 28 Jun '23

28 Jun '23

您好！ Kernel SIG 邀请您参加 2023-06-30 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG 双周例会会议内容： 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以直接回复邮件，或录入会议看板）会议链接：https://us06web.zoom.us/j/81270448575?pwd=WElDeFQ1azluejNHcXR0a3Y4R1VHUT09 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-06-30 14:00, The subject of the conference is openEuler Kernel SIG 双周例会, Summary: 1. 进展update 2. 议题征集中欢迎大家积极申报议题（新增议题可以直接回复邮件，或录入会议看板） You can join the meeting at https://us06web.zoom.us/j/81270448575?pwd=WElDeFQ1azluejNHcXR0a3Y4R1VHUT09. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH OLK-5.10] usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition
by Jialin Zhang 28 Jun '23

28 Jun '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.4-rc1 commit 2b947f8769be8b8181dc795fd292d3e7120f5204 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7EDYS CVE: CVE-2023-35828 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh(a)renesas.com> Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- drivers/usb/gadget/udc/renesas_usb3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 601829a6b4ba..a10f41c4a3f2 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2568,6 +2568,7 @@ static int renesas_usb3_remove(struct platform_device *pdev) debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); + cancel_work_sync(&usb3->role_work); usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); -- 2.25.1

2 1

2024

2023

2022

2021

2020

2019

Kernel June 2023