July 2023 - Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] ext4: Stop trying writing pages if no free blocks generated
by Zhihao Cheng 05 Jul '23

05 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7CBCS CVE: NA -------------------------------- Folllowing steps could make ext4_wripages trap into a dead loop: 1. Consume free_clusters until free_clusters > 2 * sbi->s_resv_clusters, and free_clusters > EXT4_FREECLUSTERS_WATERMARK. // eg. free_clusters = 1422, sbi->s_resv_clusters = 512 // nr_cpus = 4, EXT4_FREECLUSTERS_WATERMARK = 512 2. umount && mount. // dirty_clusters = 0 3. Run free_clusters tasks concurrently to write different files, many tasks write(appendant) 4K data by da_write method. And each inode will consume one data block and one extent block in map_block. // There are (free_clusters - EXT4_FREECLUSTERS_WATERMARK = 910) // tasks choosing da_write method, left 512 tasks choose write_begin // method. If tasks which chooses da_write path run first. // dirty_clusters = 910, free_clusters = 1422 // Tasks which choose write_begin path will get ENOSPC: // free_clusters < (nclusters + dirty_clusters + resv_clusters) // 1422 < (1 + 910 + 512) 4. After certain number of map_block iterations in ext4_writepages. // free_clusters = 0, // dirty_clusters = 910 - (1422 / 2) = 199 5. Delete one 4K file. // free_clusters = 1 6. ext4_writepages traps into dead loop: mpage_map_and_submit_extent mpage_map_one_extent // ret = ENOSPC ext4_map_blocks -> ext4_ext_map_blocks -> ext4_mb_new_blocks -> ext4_claim_free_clusters: if (free_clusters >= (nclusters + dirty_clusters)) // false if (err == -ENOSPC && ext4_count_free_clusters(sb)) // true return err *give_up_on_write = true // won't be executed Fix it by terminating ext4_writepages if no free blocks generated. Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 4 +++- fs/ext4/inode.c | 2 +- fs/ext4/mballoc.c | 5 +++-- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 6df919b154b4..3165fc239036 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -656,6 +656,7 @@ enum { #define EXT4_FREE_BLOCKS_NO_QUOT_UPDATE 0x0008 #define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010 #define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020 +#define EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL 0x0080 /* * ioctl commands diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 6edab0ef28fd..379d91d54d5e 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1328,7 +1328,8 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode, if (!ablocks[i]) continue; ext4_free_blocks(handle, inode, NULL, ablocks[i], 1, - EXT4_FREE_BLOCKS_METADATA); + EXT4_FREE_BLOCKS_METADATA | + EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL); } } kfree(ablocks); @@ -4606,6 +4607,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, /* not a good idea to call discard here directly, * but otherwise we'd need to call it every free() */ ext4_discard_preallocations(inode); + fb_flags |= EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL; ext4_free_blocks(handle, inode, NULL, newblock, EXT4_C2B(sbi, allocated_clusters), fb_flags); goto out2; diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index c40f4442c5c3..e547abd0cdc4 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2525,7 +2525,7 @@ static int mpage_map_and_submit_extent(handle_t *handle, * is non-zero, a commit should free up blocks. */ if ((err == -ENOMEM) || - (err == -ENOSPC && ext4_count_free_clusters(sb))) { + (err == -ENOSPC && EXT4_SB(sb)->s_mb_free_pending)) { if (progress) goto update_disksize; return err; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index a40990da0b62..84a3e09433ac 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -4921,8 +4921,9 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, * consistency guarantees. */ if (ext4_handle_valid(handle) && - ((flags & EXT4_FREE_BLOCKS_METADATA) || - !ext4_should_writeback_data(inode))) { + (((flags & EXT4_FREE_BLOCKS_METADATA) || + !ext4_should_writeback_data(inode)) && + !(flags & EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL))) { struct ext4_free_data *new_entry; /* * We use __GFP_NOFAIL because ext4_free_blocks() is not allowed -- 2.31.1

2 1

[PATCH OLK-5.10] ext4: Stop trying writing pages if no free blocks generated
by Zhihao Cheng 05 Jul '23

05 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7CBCS -------------------------------- Folllowing steps could make ext4_wripages trap into a dead loop: 1. Consume free_clusters until free_clusters > 2 * sbi->s_resv_clusters, and free_clusters > EXT4_FREECLUSTERS_WATERMARK. // eg. free_clusters = 1422, sbi->s_resv_clusters = 512 // nr_cpus = 4, EXT4_FREECLUSTERS_WATERMARK = 512 2. umount && mount. // dirty_clusters = 0 3. Run free_clusters tasks concurrently to write different files, many tasks write(appendant) 4K data by da_write method. And each inode will consume one data block and one extent block in map_block. // There are (free_clusters - EXT4_FREECLUSTERS_WATERMARK = 910) // tasks choosing da_write method, left 512 tasks choose write_begin // method. If tasks which chooses da_write path run first. // dirty_clusters = 910, free_clusters = 1422 // Tasks which choose write_begin path will get ENOSPC: // free_clusters < (nclusters + dirty_clusters + resv_clusters) // 1422 < (1 + 910 + 512) 4. After certain number of map_block iterations in ext4_writepages. // free_clusters = 0, // dirty_clusters = 910 - (1422 / 2) = 199 5. Delete one 4K file. // free_clusters = 1 6. ext4_writepages traps into dead loop: mpage_map_and_submit_extent mpage_map_one_extent // ret = ENOSPC ext4_map_blocks -> ext4_ext_map_blocks -> ext4_mb_new_blocks -> ext4_claim_free_clusters: if (free_clusters >= (nclusters + dirty_clusters)) // false if (err == -ENOSPC && ext4_count_free_clusters(sb)) // true return err *give_up_on_write = true // won't be executed Fix it by terminating ext4_writepages if no free blocks generated. Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/ext4/ext4.h | 1 + fs/ext4/extents.c | 4 +++- fs/ext4/inode.c | 2 +- fs/ext4/mballoc.c | 5 +++-- 4 files changed, 8 insertions(+), 4 deletions(-) diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 5d5ae6f44510..48d02bea4984 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -700,6 +700,7 @@ enum { #define EXT4_FREE_BLOCKS_NOFREE_FIRST_CLUSTER 0x0010 #define EXT4_FREE_BLOCKS_NOFREE_LAST_CLUSTER 0x0020 #define EXT4_FREE_BLOCKS_RERESERVE_CLUSTER 0x0040 +#define EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL 0x0080 /* * ioctl commands diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index e42a78170109..b1eb4ea2c68a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -1294,7 +1294,8 @@ static int ext4_ext_split(handle_t *handle, struct inode *inode, if (!ablocks[i]) continue; ext4_free_blocks(handle, inode, NULL, ablocks[i], 1, - EXT4_FREE_BLOCKS_METADATA); + EXT4_FREE_BLOCKS_METADATA | + EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL); } } kfree(ablocks); @@ -4329,6 +4330,7 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode, ext4_discard_preallocations(inode, 0); if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE) fb_flags = EXT4_FREE_BLOCKS_NO_QUOT_UPDATE; + fb_flags |= EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL; ext4_free_blocks(handle, inode, NULL, newblock, EXT4_C2B(sbi, allocated_clusters), fb_flags); diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 44018d1da27e..ebb794fed3a7 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -2479,7 +2479,7 @@ static int mpage_map_and_submit_extent(handle_t *handle, * is non-zero, a commit should free up blocks. */ if ((err == -ENOMEM) || - (err == -ENOSPC && ext4_count_free_clusters(sb))) { + (err == -ENOSPC && EXT4_SB(sb)->s_mb_free_pending)) { if (progress) goto update_disksize; return err; diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index fd8464aadf00..3870dff5f2e7 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -5498,8 +5498,9 @@ void ext4_free_blocks(handle_t *handle, struct inode *inode, * consistency guarantees. */ if (ext4_handle_valid(handle) && - ((flags & EXT4_FREE_BLOCKS_METADATA) || - !ext4_should_writeback_data(inode))) { + (((flags & EXT4_FREE_BLOCKS_METADATA) || + !ext4_should_writeback_data(inode)) && + !(flags & EXT4_FREE_BLOCKS_DONT_WAIT_JOURNAL))) { struct ext4_free_data *new_entry; /* * We use __GFP_NOFAIL because ext4_free_blocks() is not allowed -- 2.31.1

2 1

[PATCH openEuler-22.03-LTS] ipv6: sr: fix out-of-bounds read when setting HMAC data.
by Ziyang Xuan 05 Jul '23

05 Jul '23

From: David Lebrun <dlebrun(a)google.com> stable inclusion from stable-v5.10.143 commit 076f2479fc5a15c4a970ca3b5e57d42ba09a31fa category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7ASU6 CVE: CVE-2023-2860 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 84a53580c5d2138c7361c7c3eea5b31827e63b35 ] The SRv6 layer allows defining HMAC data that can later be used to sign IPv6 Segment Routing Headers. This configuration is realised via netlink through four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual length of the SECRET attribute, it is possible to provide invalid combinations (e.g., secret = "", secretlen = 64). This case is not checked in the code and with an appropriately crafted netlink message, an out-of-bounds read of up to 64 bytes (max secret length) can occur past the skb end pointer and into skb_shared_info: Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 208 memcpy(hinfo->secret, secret, slen); (gdb) bt #0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208 #1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600, extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>, family=<optimized out>) at net/netlink/genetlink.c:731 #2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00, family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775 #3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792 #4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>) at net/netlink/af_netlink.c:2501 #5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803 #6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000) at net/netlink/af_netlink.c:1319 #7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>) at net/netlink/af_netlink.c:1345 #8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921 ... (gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end $1 = 0xffff88800b1b76c0 (gdb) p/x secret $2 = 0xffff88800b1b76c0 (gdb) p slen $3 = 64 '@' The OOB data can then be read back from userspace by dumping HMAC state. This commit fixes this by ensuring SECRETLEN cannot exceed the actual length of SECRET. Reported-by: Lucas Leong <wmliang.tw(a)gmail.com> Tested: verified that EINVAL is correctly returned when secretlen > len(secret) Fixes: 4f4853dc1c9c1 ("ipv6: sr: implement API to control SR HMAC structure") Signed-off-by: David Lebrun <dlebrun(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/ipv6/seg6.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv6/seg6.c b/net/ipv6/seg6.c index bff6bc75cfb7..45e3f1b552e0 100644 --- a/net/ipv6/seg6.c +++ b/net/ipv6/seg6.c @@ -135,6 +135,11 @@ static int seg6_genl_sethmac(struct sk_buff *skb, struct genl_info *info) goto out_unlock; } + if (slen > nla_len(info->attrs[SEG6_ATTR_SECRET])) { + err = -EINVAL; + goto out_unlock; + } + if (hinfo) { err = seg6_hmac_info_del(net, hmackeyid); if (err) -- 2.25.1

2 1

[PATCH OLK-5.10 0/5] quota: fix race condition between dqput() and dquot_mark_dquot_dirty()
by Baokun Li 05 Jul '23

05 Jul '23

Baokun Li (5): quota: factor out dquot_write_dquot() quota: rename dquot_active() to inode_quota_active() quota: add new helper dquot_active() quota: fix dqput() to follow the guarantees dquot_srcu should provide quota: simplify drop_dquot_ref() fs/quota/dquot.c | 244 ++++++++++++++++++++++++----------------------- 1 file changed, 125 insertions(+), 119 deletions(-) -- 2.31.1

2 6

[PATCH openEuler-1.0-LTS] ipvlan:Fix out-of-bounds caused by unclear skb->cb
by Yongqiang Liu 05 Jul '23

05 Jul '23

From: "t.feng" <fengtao40(a)huawei.com> stable inclusion from stable-v4.19.284 commit b36dcf3ed547c103acef6f52bed000a0ac6c074f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7GVI1 CVE: CVE-2023-3090 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40(a)huawei.com> Suggested-by: Florian Westphal <fw(a)strlen.de> Reviewed-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index a83c22d46896..32dca624356f 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -443,6 +443,9 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, &rt->dst); + + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + err = ip_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; @@ -481,6 +484,9 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, dst); + + memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + err = ip6_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; -- 2.25.1

2 1

[PATCH OLK-5.10] iommu/iova: move IOVA_MAX_GLOBAL_MAGS outside of IOMMU_SUPPORT
by Zhang Zekun 04 Jul '23

04 Jul '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7I3P1 CVE: NA -------------------------------------------- The commit 0227a749c263db30ef5d49fc009a5161ae70cfab introduce a config CONFIG_IOVA_MAX_GLOBAL_MAGS, but it relies on IOMMU_SUPPORT. Some drivers can compile without IOMMU_SUPPORT, but still include include/linux/iova.h, which can cause compile problem. Fix this by moving the definition of CONFIG_IOVA_MAX_GLOBAL_MAGS out of IOMMU_SUPPORT. The error compile message is showned as below: In file included from ./include/linux/intel-iommu.h:14, from ./include/drm/intel-gtt.h:8, from drivers/char/agp/intel-agp.c:15: ./include/linux/iova.h:29:25: error: ‘CONFIG_IOVA_MAX_GLOBAL_MAGS’ undeclared here (not in a function) 29 | #define MAX_GLOBAL_MAGS CONFIG_IOVA_MAX_GLOBAL_MAGS /* magazines per bin */ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/iova.h:34:30: note: in expansion of macro ‘MAX_GLOBAL_MAGS’ 34 | struct iova_magazine *depot[MAX_GLOBAL_MAGS]; | ^~~~~~~~~~~~~~~ In file included from ./include/linux/intel-iommu.h:14, from ./include/drm/intel-gtt.h:8, from drivers/char/agp/intel-gtt.c:27: ./include/linux/iova.h:29:25: error: ‘CONFIG_IOVA_MAX_GLOBAL_MAGS’ undeclared here (not in a function) 29 | #define MAX_GLOBAL_MAGS CONFIG_IOVA_MAX_GLOBAL_MAGS /* magazines per bin */ | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ./include/linux/iova.h:34:30: note: in expansion of macro ‘MAX_GLOBAL_MAGS’ 34 | struct iova_magazine *depot[MAX_GLOBAL_MAGS]; | ^~~~~~~~~~~~~~~ make[3]: *** [scripts/Makefile.build:286: drivers/char/agp/intel-agp.o] Error 1 make[3]: *** Waiting for unfinished jobs.... make[3]: *** [scripts/Makefile.build:286: drivers/char/agp/intel-gtt.o] Error 1 make[2]: *** [scripts/Makefile.build:503: drivers/char/agp] Error 2 make[1]: *** [scripts/Makefile.build:503: drivers/char] Error 2 make[1]: *** Waiting for unfinished jobs.... Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- drivers/iommu/Kconfig | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig index 54d4a8cc3876..b630e58c49b6 100644 --- a/drivers/iommu/Kconfig +++ b/drivers/iommu/Kconfig @@ -437,6 +437,9 @@ config SMMU_BYPASS_DEV This feature will be replaced by ACPI IORT RMR node, which will be upstreamed in mainline. + +endif # IOMMU_SUPPORT + config IOVA_MAX_GLOBAL_MAGS int "Set the max iova global magzines in iova rcache" range 16 2048 @@ -446,6 +449,3 @@ config IOVA_MAX_GLOBAL_MAGS it can be a bottle neck when lots of cpus are contending to use it. If you are suffering from the speed of allocing iova with more than 128 cpus, try to tune this config larger. - - -endif # IOMMU_SUPPORT -- 2.17.1

2 1

[PATCH OLK-5.10 0/2] blk-wbt: don't show valid wbt_lat_usec in
by Li Lingfeng 03 Jul '23

03 Jul '23

Yu Kuai (2): blk-wbt: make enable_state more accurate blk-wbt: don't show valid wbt_lat_usec in sysfs while wbt is disabled block/blk-sysfs.c | 3 +++ block/blk-wbt.c | 15 ++++++++++++++- block/blk-wbt.h | 17 ++++++++++++----- 3 files changed, 29 insertions(+), 6 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10] dm stats: check for and propagate alloc_percpu failure
by Li Lingfeng 03 Jul '23

03 Jul '23

From: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> mainline inclusion from mainline-v6.3-rc4 commit d3aa3e060c4a80827eb801fc448debc9daa7c46b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7I2L8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Check alloc_precpu()'s return value and return an error from dm_stats_init() if it fails. Update alloc_dev() to fail if dm_stats_init() does. Otherwise, a NULL pointer dereference will occur in dm_stats_cleanup() even if dm-stats isn't being actively used. Fixes: fd2ed4d25270 ("dm: add statistics support") Cc: stable(a)vger.kernel.org Signed-off-by: Jiasheng Jiang <jiasheng(a)iscas.ac.cn> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Conflicts: drivers/md/dm-stats.c drivers/md/dm.c Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/md/dm-stats.c | 7 ++++++- drivers/md/dm-stats.h | 2 +- drivers/md/dm.c | 4 +++- 3 files changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-stats.c b/drivers/md/dm-stats.c index 55443a6598fa..4029281ca383 100644 --- a/drivers/md/dm-stats.c +++ b/drivers/md/dm-stats.c @@ -188,7 +188,7 @@ static int dm_stat_in_flight(struct dm_stat_shared *shared) atomic_read(&shared->in_flight[WRITE]); } -void dm_stats_init(struct dm_stats *stats) +int dm_stats_init(struct dm_stats *stats) { int cpu; struct dm_stats_last_position *last; @@ -196,11 +196,16 @@ void dm_stats_init(struct dm_stats *stats) mutex_init(&stats->mutex); INIT_LIST_HEAD(&stats->list); stats->last = alloc_percpu(struct dm_stats_last_position); + if (!stats->last) + return -ENOMEM; + for_each_possible_cpu(cpu) { last = per_cpu_ptr(stats->last, cpu); last->last_sector = (sector_t)ULLONG_MAX; last->last_rw = UINT_MAX; } + + return 0; } void dm_stats_cleanup(struct dm_stats *stats) diff --git a/drivers/md/dm-stats.h b/drivers/md/dm-stats.h index 2ddfae678f32..dcac11fce03b 100644 --- a/drivers/md/dm-stats.h +++ b/drivers/md/dm-stats.h @@ -22,7 +22,7 @@ struct dm_stats_aux { unsigned long long duration_ns; }; -void dm_stats_init(struct dm_stats *st); +int dm_stats_init(struct dm_stats *st); void dm_stats_cleanup(struct dm_stats *st); struct mapped_device; diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 1cb2a84f2403..0c9ce43f3b53 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -1904,7 +1904,9 @@ static struct mapped_device *alloc_dev(int minor) if (!md->bdev) goto bad; - dm_stats_init(&md->stats); + r = dm_stats_init(&md->stats); + if (r < 0) + goto bad; /* Populate the mapping, nobody knows we exist yet */ spin_lock(&_minor_lock); -- 2.31.1

2 1

[PATCH v3 OLK-5.10 0/2] Add lz4k support for zram
by Tu Jinjiang 03 Jul '23

03 Jul '23

Change log: v3: - update size_bytes_count() to make it compile sucessfully on 32-bit architecture. - fix some style problem. v2: - fix some style problem. Tu Jinjiang (2): crypto: add lz4k Cryptographic API mm/zram: Add lz4k support for zram crypto/Kconfig | 8 + crypto/Makefile | 1 + crypto/lz4k.c | 100 ++++++ drivers/block/zram/zcomp.c | 3 + include/linux/lz4k.h | 384 +++++++++++++++++++++++ lib/Kconfig | 6 + lib/Makefile | 2 + lib/lz4k/Makefile | 2 + lib/lz4k/lz4k_decode.c | 314 +++++++++++++++++++ lib/lz4k/lz4k_encode.c | 554 +++++++++++++++++++++++++++++++++ lib/lz4k/lz4k_encode_private.h | 142 +++++++++ lib/lz4k/lz4k_private.h | 282 +++++++++++++++++ 12 files changed, 1798 insertions(+) create mode 100644 crypto/lz4k.c create mode 100644 include/linux/lz4k.h create mode 100644 lib/lz4k/Makefile create mode 100644 lib/lz4k/lz4k_decode.c create mode 100644 lib/lz4k/lz4k_encode.c create mode 100644 lib/lz4k/lz4k_encode_private.h create mode 100644 lib/lz4k/lz4k_private.h -- 2.25.1

2 3

[PATCH OLK-5.10] ipvlan:Fix out-of-bounds caused by unclear skb->cb
by Zhengchao Shao 03 Jul '23

03 Jul '23

From: "t.feng" <fengtao40(a)huawei.com> stable inclusion from stable-v5.10.181 commit f4a371d3f5a7a71dff1ab48b3122c5cf23cc7ad5 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7GVI1 CVE: CVE-2023-3090 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] <IRQ> [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] </IRQ> [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 <c3> cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" <fengtao40(a)huawei.com> Suggested-by: Florian Westphal <fw(a)strlen.de> Reviewed-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index 1c2d92b43639..03fe656c543f 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -437,6 +437,9 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, &rt->dst); + + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + err = ip_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; @@ -475,6 +478,9 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, dst); + + memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + err = ip6_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; -- 2.34.1

2 1

2024

2023

2022

2021

2020

2019

Kernel July 2023