January 2024 - Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 v10 0/6] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 12 Jan '24

12 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP; 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. v7->v8: 1) Add detection of mounting part0 while partitions write opened; 2) Add detection of writing partitions while part0 mounted; 3) Add config in openeuler_defconfig. v8->v9: 1) Split bd_mounters into bd_mounted and part_mounters; 2) Add part_writers; 3) Count part_writers and part_mounters regardless of whether BLK_DEV_DETECT_WRITING_PART0 is set. v9->v10: 1) Split the logic of detecting writing lower device from bd_may_open(); 2) Fix the bug of initializing bdev_allow_write_mounted. Li Lingfeng (6): block: Record writing and mounting regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted add config about writing mounted devices in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + block/Kconfig | 17 ++++ block/bdev.c | 123 +++++++++++++++++++++---- include/linux/blk_types.h | 3 + include/linux/blkdev.h | 2 + 6 files changed, 133 insertions(+), 18 deletions(-) -- 2.31.1

2 7

[PATCH OLK-6.6 00/12] Support feature pv-qspinlock pv-sched
by lishusen 12 Jan '24

12 Jan '24

Support feature pv-qspinlock pv-sched Zengruan Ye (10): KVM: arm64: Document PV-sched interface KVM: arm64: Implement PV_SCHED_FEATURES call KVM: arm64: Support pvsched preempted via shared structure KVM: arm64: Add interface to support vCPU preempted check KVM: arm64: Support the vCPU preemption check KVM: arm64: Add SMCCC PV-sched to kick cpu KVM: arm64: Implement PV_SCHED_KICK_CPU call KVM: arm64: Add interface to support PV qspinlock KVM: arm64: Enable PV qspinlock KVM: arm64: Add tracepoints for PV qspinlock lishusen (1): KVM: arm64: Replace pv.ops by static_call for PV qspinlock feature yezengruan (1): kvm: arm64: fix some pvsched bugs Documentation/virt/kvm/arm/pvsched.rst | 74 ++++++++ arch/arm64/Kconfig | 13 ++ arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/kvm_host.h | 20 +++ arch/arm64/include/asm/paravirt.h | 49 ++++++ arch/arm64/include/asm/pvsched-abi.h | 16 ++ arch/arm64/include/asm/qspinlock.h | 48 +++++ arch/arm64/include/asm/qspinlock_paravirt.h | 12 ++ arch/arm64/include/asm/spinlock.h | 13 ++ arch/arm64/kernel/Makefile | 3 +- arch/arm64/kernel/paravirt-spinlocks.c | 21 +++ arch/arm64/kernel/paravirt.c | 185 ++++++++++++++++++++ arch/arm64/kernel/trace-paravirt.h | 66 +++++++ arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 15 +- arch/arm64/kvm/handle_exit.c | 1 + arch/arm64/kvm/hypercalls.c | 20 +++ arch/arm64/kvm/pvsched.c | 79 +++++++++ arch/arm64/kvm/trace_arm.h | 18 ++ include/linux/arm-smccc.h | 25 +++ include/linux/cpuhotplug.h | 1 + 21 files changed, 678 insertions(+), 4 deletions(-) create mode 100644 Documentation/virt/kvm/arm/pvsched.rst create mode 100644 arch/arm64/include/asm/pvsched-abi.h create mode 100644 arch/arm64/include/asm/qspinlock.h create mode 100644 arch/arm64/include/asm/qspinlock_paravirt.h create mode 100644 arch/arm64/kernel/paravirt-spinlocks.c create mode 100644 arch/arm64/kernel/trace-paravirt.h create mode 100644 arch/arm64/kvm/pvsched.c -- 2.33.0

2 13

[PATCH OLK-5.10] drm/amdgpu: correct the amdgpu runtime dereference usage count
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Prike Liang <Prike.Liang(a)amd.com> stable inclusion from stable-v5.10.205 commit d4fb20dcc13b37ee4f02025cd1dc8054d6027721 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ] Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang(a)amd.com> Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7cc7af2a6822..3671a700189d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -299,13 +299,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set, adev->have_disp_power_ref = true; return ret; } - /* if we have no active crtcs, then drop the power ref - we got before */ - if (!active && adev->have_disp_power_ref) { - pm_runtime_put_autosuspend(dev->dev); + /* if we have no active crtcs, then go to + * drop the power ref we got before + */ + if (!active && adev->have_disp_power_ref) adev->have_disp_power_ref = false; - } - out: /* drop the power reference we got coming in here */ pm_runtime_put_autosuspend(dev->dev); -- 2.33.0

1 0

[PATCH OLK-5.10] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Lukasz Majczak <lma(a)semihalf.com> stable inclusion from stable-v5.10.205 commit 31c31a78dccfc6ad15af1f6e55ce8cfbb3d31fa5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 3d887d512494d678b17c57b835c32f4e48d34f26 ] As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable(a)vger.kernel.org> # 4.14+ Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> Reviewed-by: Radoslaw Biernacki <rad(a)chromium.org> Signed-off-by: Manasi Navare <navaremanasi(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@se… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index b5e15933cb5f..27305f339881 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2612,14 +2612,14 @@ static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper( struct drm_dp_mst_branch *found_mstb; struct drm_dp_mst_port *port; + if (!mstb) + return NULL; + if (memcmp(mstb->guid, guid, 16) == 0) return mstb; list_for_each_entry(port, &mstb->ports, next) { - if (!port->mstb) - continue; - found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid); if (found_mstb) -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: correct chunk_ptr to a pointer to chunk.
by Dapeng Yu 12 Jan '24

12 Jan '24

From: YuanShang <YuanShang.Mao(a)amd.com> stable inclusion from stable-v5.10.205 commit 13b1fa5407949fb7ada3d2362c5099e18b2a25c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ] The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <YuanShang.Mao(a)amd.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index ffd8f5601e28..9e5eae1207e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -153,7 +153,7 @@ static int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, union drm_amdgpu_cs } for (i = 0; i < p->nchunks; i++) { - struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL; + struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL; struct drm_amdgpu_cs_chunk user_chunk; uint32_t __user *cdata; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Qu Huang <qu.huang(a)linux.dev> stable inclusion from stable-v5.10.205 commit f475d5502f33a6c5b149b0afe96316ad1962a64a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 5104fdf50d326db2c1a994f8b35dcd46e63ae4ad ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <qu.huang(a)linux.dev> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 00a190929b55..48df32dd352e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -575,6 +575,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf, ssize_t result = 0; int r; + if (!adev->smc_rreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; @@ -634,6 +637,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user * ssize_t result = 0; int r; + if (!adev->smc_wreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_pool: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_hugetlb: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6] kabi: mm: add kabi reserve for mm structure
by Kefeng Wang 12 Jan '24

12 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UU53 --------------------------- Reserve space for the structure in mm subsystem. Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> --- include/linux/mempolicy.h | 3 +++ include/linux/mempool.h | 4 ++++ include/linux/memremap.h | 9 +++++++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 11 +++++++++++ include/linux/mmzone.h | 14 ++++++++++++++ include/linux/pagemap.h | 4 ++++ include/linux/shrinker.h | 7 +++++++ include/linux/swap.h | 3 +++ 9 files changed, 63 insertions(+) diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index ca62e945e4f7..2e81ac87e6f6 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -52,6 +52,9 @@ struct mempolicy { nodemask_t cpuset_mems_allowed; /* relative to these nodes */ nodemask_t user_nodemask; /* nodemask passed by user */ } w; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) }; /* diff --git a/include/linux/mempool.h b/include/linux/mempool.h index 4aae6c06c5f2..178959b2ee5c 100644 --- a/include/linux/mempool.h +++ b/include/linux/mempool.h @@ -7,6 +7,7 @@ #include <linux/wait.h> #include <linux/compiler.h> +#include <linux/kabi.h> struct kmem_cache; @@ -23,6 +24,9 @@ typedef struct mempool_s { mempool_alloc_t *alloc; mempool_free_t *free; wait_queue_head_t wait; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) } mempool_t; static inline bool mempool_initialized(mempool_t *pool) diff --git a/include/linux/memremap.h b/include/linux/memremap.h index 1314d9c5f05b..816532f7ae92 100644 --- a/include/linux/memremap.h +++ b/include/linux/memremap.h @@ -25,6 +25,8 @@ struct vmem_altmap { unsigned long free; unsigned long align; unsigned long alloc; + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* @@ -99,6 +101,8 @@ struct dev_pagemap_ops { */ int (*memory_failure)(struct dev_pagemap *pgmap, unsigned long pfn, unsigned long nr_pages, int mf_flags); + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define PGMAP_ALTMAP_VALID (1 << 0) @@ -133,6 +137,11 @@ struct dev_pagemap { const struct dev_pagemap_ops *ops; void *owner; int nr_range; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) union { struct range range; DECLARE_FLEX_ARRAY(struct range, ranges); diff --git a/include/linux/mm.h b/include/linux/mm.h index f078aa6b493c..ffd323dda7cf 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -30,6 +30,7 @@ #include <linux/kasan.h> #include <linux/memremap.h> #include <linux/slab.h> +#include <linux/kabi.h> struct mempolicy; struct anon_vma; @@ -562,6 +563,9 @@ struct vm_fault { * page table to avoid allocation from * atomic context. */ + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) }; /* @@ -641,6 +645,10 @@ struct vm_operations_struct { */ struct page *(*find_special_page)(struct vm_area_struct *vma, unsigned long addr); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #ifdef CONFIG_NUMA_BALANCING diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 0bc3c7c191a5..03a0a3e53986 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -22,6 +22,8 @@ #include <asm/mmu.h> +#include <linux/kabi.h> + #ifndef AT_VECTOR_SIZE_ARCH #define AT_VECTOR_SIZE_ARCH 0 #endif @@ -677,6 +679,10 @@ struct vm_area_struct { #ifdef CONFIG_SHARE_POOL struct sp_area *spa; #endif + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) } __randomize_layout; #ifdef CONFIG_SCHED_MM_CID @@ -939,6 +945,11 @@ struct mm_struct { #endif } __randomize_layout; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) /* * The mm_cpumask needs to be at the end of mm_struct, because it * is dynamically sized based on nr_cpu_ids. diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 57086c57b8e4..0821282fccd3 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -637,6 +637,10 @@ struct lruvec { #ifdef CONFIG_MEMCG struct pglist_data *pgdat; #endif + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* Isolate unmapped pages */ @@ -997,6 +1001,12 @@ struct zone { bool contiguous; CACHELINE_PADDING(_pad3_); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* Zone statistics */ atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS]; atomic_long_t vm_numa_event[NR_VM_NUMA_EVENT_ITEMS]; @@ -1410,6 +1420,10 @@ typedef struct pglist_data { CACHELINE_PADDING(_pad2_); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + /* Per-node vmstats */ struct per_cpu_nodestat __percpu *per_cpu_nodestats; atomic_long_t vm_stat[NR_VM_NODE_STAT_ITEMS]; diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 8c9608b217b0..d418f1c563ee 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/hardirq.h> /* for in_interrupt() */ #include <linux/hugetlb_inline.h> +#include <linux/kabi.h> struct folio_batch; @@ -1262,6 +1263,9 @@ struct readahead_control { struct file *file; struct address_space *mapping; struct file_ra_state *ra; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) /* private: use the readahead_* accessors instead */ pgoff_t _index; unsigned int _nr_pages; diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index 224293b2dd06..335e7aa12fa5 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -4,6 +4,7 @@ #include <linux/atomic.h> #include <linux/types.h> +#include <linux/kabi.h> /* * This struct is used to pass information from page reclaim to the shrinkers. @@ -34,6 +35,9 @@ struct shrink_control { /* current memcg being shrunk (for memcg aware shrinkers) */ struct mem_cgroup *memcg; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define SHRINK_STOP (~0UL) @@ -83,6 +87,9 @@ struct shrinker { #endif /* objs pending delete, per node */ atomic_long_t *nr_deferred; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ diff --git a/include/linux/swap.h b/include/linux/swap.h index 9dc160d6fd43..a0286656c231 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -334,6 +334,9 @@ struct swap_info_struct { */ struct work_struct discard_work; /* discard worker */ struct swap_cluster_list discard_clusters; /* discard clusters list */ + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) struct plist_node avail_lists[]; /* * entries in swap_avail_heads, one * entry per node. -- 2.27.0

2 1

[PATCH OLK-6.6 0/3] kabi reserve for gmem
by Wupeng Ma 12 Jan '24

12 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Reserve kabi in preparation for gmem. Ma Wupeng (3): mm: gmem: kabi reserve for gmem mm: gmem: Introduce new node state N_HETEROGENEOUS openeuler_defconfig: enable CONFIG_GMEM by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/base/node.c | 6 ++++++ include/linux/device.h | 4 ++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 5 +++++ include/linux/nodemask.h | 3 +++ mm/Kconfig | 14 ++++++++++++++ mm/page_alloc.c | 3 +++ 9 files changed, 45 insertions(+) -- 2.25.1

4 6

[PATCH OLK-6.6] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 12 Jan '24

12 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> mainline inclusion from mainline-v6.7-rc4 commit 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8VGWZ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Revert "drm/prime: Unexport helpers for fd/handle conversion" This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

2 1

[PATCH OLK-6.6 1/1] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 12 Jan '24

12 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> mainline inclusion from mainline-v6.7-rc4 commit 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8VGWZ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Revert "drm/prime: Unexport helpers for fd/handle conversion" This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

2 1

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 0/2] Export remaining aarch64 kvm exit reasons
by lishusen 12 Jan '24

12 Jan '24

Export remaining aarch64 kvm exit reasons to debugfs Zenghui Yu (1): KVM: arm64: Fix {fp_asimd,sve}_exit_stat manipulation chenjiajun (1): kvm: debugfs: export remaining aarch64 kvm exit reasons to debugfs C | 0 arch/arm64/include/asm/kvm_host.h | 15 +++++++++++++++ arch/arm64/kvm/handle_exit.c | 9 +++++++++ arch/arm64/kvm/hyp/include/hyp/switch.h | 2 ++ arch/arm64/kvm/mmu.c | 1 + arch/arm64/kvm/sys_regs.c | 11 +++++++++++ 6 files changed, 38 insertions(+) create mode 100644 C -- 2.33.0

2 3

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_hugetlb: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 225 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2595 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-5.10] drm/radeon: possible buffer overflow
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> stable inclusion from stable-v5.10.205 commit 7b063c93bece827fde237fae1c101bceeee4e896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit dd05484f99d16715a88eedfca363828ef9a4c2d4 ] Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1(a)huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 11e3e99a9f01..96dbf595254c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4819,14 +4819,15 @@ int evergreen_irq_process(struct radeon_device *rdev) break; case 44: /* hdmi */ afmt_idx = src_data; - if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) - DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); - if (afmt_idx > 5) { DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + + if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) + DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); + afmt_status[afmt_idx] &= ~AFMT_AZ_FORMAT_WTRIG; queue_hdmi = true; DRM_DEBUG("IH: HDMI%d\n", afmt_idx + 1); -- 2.33.0

2 1

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by Jia Qingtong 12 Jan '24

12 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ea6de9f6732d495c506f9c140b4ec17c957e1b77 -- 2.43.GIT

2 4

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by Jia Qingtong 12 Jan '24

12 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ea6de9f6732d495c506f9c140b4ec17c957e1b77 -- 2.43.GIT

2 4

[PATCH OLK-6.6 V5 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 11 Jan '24

11 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() openeuler_defconfig: enable CONFIG_BPF_SCHED arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 27 ++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 ++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 478 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 0/3] kabi reserve for gmem
by Wupeng Ma 11 Jan '24

11 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Reserve kabi in preparation for gmem. Ma Wupeng (3): mm: gmem: kabi reserve for gmem mm: gmem: Introduce new node state N_HETEROGENEOUS openeuler_defconfig: enable CONFIG_GMEM by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/base/node.c | 6 ++++++ include/linux/device.h | 4 ++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 5 +++++ include/linux/nodemask.h | 3 +++ mm/Kconfig | 14 ++++++++++++++ mm/page_alloc.c | 3 +++ 9 files changed, 45 insertions(+) -- 2.25.1

2 4

[PATCH OLK-6.6 00/11] Support feature pv-qspinlock and pv-sched
by lishusen 11 Jan '24

11 Jan '24

Support feature pv-qspinlock and pv-sched after pv.ops removed Zengruan Ye (10): KVM: arm64: Document PV-sched interface KVM: arm64: Implement PV_SCHED_FEATURES call KVM: arm64: Support pvsched preempted via shared structure KVM: arm64: Add interface to support vCPU preempted check KVM: arm64: Support the vCPU preemption check KVM: arm64: Add SMCCC PV-sched to kick cpu KVM: arm64: Implement PV_SCHED_KICK_CPU call KVM: arm64: Add interface to support PV qspinlock KVM: arm64: Enable PV qspinlock KVM: arm64: Add tracepoints for PV qspinlock lishusen (1): KVM: arm64: Replace pv.ops by static_call for PV qspinlock feature Documentation/virt/kvm/arm/pvsched.rst | 74 +++++++++ arch/arm64/Kconfig | 13 ++ arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/kvm_host.h | 20 +++ arch/arm64/include/asm/paravirt.h | 44 +++++ arch/arm64/include/asm/pvsched-abi.h | 16 ++ arch/arm64/include/asm/qspinlock.h | 48 ++++++ arch/arm64/include/asm/qspinlock_paravirt.h | 12 ++ arch/arm64/include/asm/spinlock.h | 13 ++ arch/arm64/kernel/Makefile | 3 +- arch/arm64/kernel/paravirt-spinlocks.c | 21 +++ arch/arm64/kernel/paravirt.c | 174 ++++++++++++++++++++ arch/arm64/kernel/setup.c | 2 + arch/arm64/kernel/trace-paravirt.h | 66 ++++++++ arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 13 +- arch/arm64/kvm/handle_exit.c | 1 + arch/arm64/kvm/hypercalls.c | 20 +++ arch/arm64/kvm/pvsched.c | 79 +++++++++ arch/arm64/kvm/trace_arm.h | 18 ++ include/linux/arm-smccc.h | 25 +++ include/linux/cpuhotplug.h | 1 + 22 files changed, 662 insertions(+), 4 deletions(-) create mode 100644 Documentation/virt/kvm/arm/pvsched.rst create mode 100644 arch/arm64/include/asm/pvsched-abi.h create mode 100644 arch/arm64/include/asm/qspinlock.h create mode 100644 arch/arm64/include/asm/qspinlock_paravirt.h create mode 100644 arch/arm64/kernel/paravirt-spinlocks.c create mode 100644 arch/arm64/kernel/trace-paravirt.h create mode 100644 arch/arm64/kvm/pvsched.c -- 2.33.0

2 12

[PATCH] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 11 Jan '24

11 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

1 0