Kernel November 2024

kernel@openeuler.org

71 participants
782 discussions

[PATCH openEuler-22.03-LTS-SP1] serial: protect uart_port_dtr_rts() in uart_shutdown() too
by Yi Yang 01 Nov '24

01 Nov '24

From: "Jiri Slaby (SUSE)" <jirislaby(a)kernel.org> mainline inclusion from mainline-v6.12-rc1 commit 602babaa84d627923713acaf5f7e9a4369e77473 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREU CVE: CVE-2024-50058 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Conflicts: drivers/tty/serial/serial_core.c [Conflicts due to 5d4203990737("tty: Convert ->dtr_rts() to take bool argument") not merged] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/tty/serial/serial_core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 827bb6b2369e..47312fe902cb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -286,14 +286,16 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (uport && uart_console(uport) && tty) { - uport->cons->cflag = tty->termios.c_cflag; - uport->cons->ispeed = tty->termios.c_ispeed; - uport->cons->ospeed = tty->termios.c_ospeed; - } + if (uport) { + if (uart_console(uport) && tty) { + uport->cons->cflag = tty->termios.c_cflag; + uport->cons->ispeed = tty->termios.c_ispeed; + uport->cons->ospeed = tty->termios.c_ospeed; + } - if (!tty || C_HUPCL(tty)) - uart_port_dtr_rts(uport, 0); + if (!tty || C_HUPCL(tty)) + uart_port_dtr_rts(uport, 0); + } uart_port_shutdown(port); } -- 2.25.1

2 1

[openeuler:OLK-5.10 18689/30000] drivers/ub/urma/ubcore/ubcore_dp.c:26:5: warning: no previous prototype for 'ubcore_post_jetty_send_wr'
by kernel test robot 01 Nov '24

01 Nov '24

Hi Yizhen, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: c78205e40443cde6028b0539f30a00fda4167edd commit: 33800c2820ab85fe02800e33f6b3287130278bdf [18689/30000] ub: ubcore add data plane ops api. config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411010813.TGMdTWRa-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411010813.TGMdTWRa-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411010813.TGMdTWRa-lkp@intel.com/ All warnings (new ones prefixed by >>): >> drivers/ub/urma/ubcore/ubcore_dp.c:26:5: warning: no previous prototype for 'ubcore_post_jetty_send_wr' [-Wmissing-prototypes] 26 | int ubcore_post_jetty_send_wr(struct ubcore_jetty *jetty, const struct ubcore_jfs_wr *wr, | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:42:5: warning: no previous prototype for 'ubcore_post_jetty_recv_wr' [-Wmissing-prototypes] 42 | int ubcore_post_jetty_recv_wr(struct ubcore_jetty *jetty, const struct ubcore_jfr_wr *wr, | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:58:5: warning: no previous prototype for 'ubcore_post_jfs_wr' [-Wmissing-prototypes] 58 | int ubcore_post_jfs_wr(struct ubcore_jfs *jfs, const struct ubcore_jfs_wr *wr, | ^~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:74:5: warning: no previous prototype for 'ubcore_post_jfr_wr' [-Wmissing-prototypes] 74 | int ubcore_post_jfr_wr(struct ubcore_jfr *jfr, const struct ubcore_jfr_wr *wr, | ^~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:90:5: warning: no previous prototype for 'ubcore_poll_jfc' [-Wmissing-prototypes] 90 | int ubcore_poll_jfc(struct ubcore_jfc *jfc, int cr_cnt, struct ubcore_cr *cr) | ^~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_dp.c:105:5: warning: no previous prototype for 'ubcore_rearm_jfc' [-Wmissing-prototypes] 105 | int ubcore_rearm_jfc(struct ubcore_jfc *jfc, bool solicited_only) | ^~~~~~~~~~~~~~~~ vim +/ubcore_post_jetty_send_wr +26 drivers/ub/urma/ubcore/ubcore_dp.c 25 > 26 int ubcore_post_jetty_send_wr(struct ubcore_jetty *jetty, const struct ubcore_jfs_wr *wr, 27 struct ubcore_jfs_wr **bad_wr) 28 { 29 struct ubcore_ops *dev_ops; 30 31 if (jetty == NULL || jetty->ub_dev == NULL || jetty->ub_dev->ops == NULL || 32 jetty->ub_dev->ops->post_jetty_send_wr == NULL || wr == NULL || bad_wr == NULL) { 33 ubcore_log_err("Invalid parameter"); 34 return -EINVAL; 35 } 36 37 dev_ops = jetty->ub_dev->ops; 38 return dev_ops->post_jetty_send_wr(jetty, wr, bad_wr); 39 } 40 EXPORT_SYMBOL(ubcore_post_jetty_send_wr); 41 > 42 int ubcore_post_jetty_recv_wr(struct ubcore_jetty *jetty, const struct ubcore_jfr_wr *wr, 43 struct ubcore_jfr_wr **bad_wr) 44 { 45 struct ubcore_ops *dev_ops; 46 47 if (jetty == NULL || jetty->ub_dev == NULL || jetty->ub_dev->ops == NULL || 48 jetty->ub_dev->ops->post_jetty_recv_wr == NULL || wr == NULL || bad_wr == NULL) { 49 ubcore_log_err("Invalid parameter"); 50 return -EINVAL; 51 } 52 53 dev_ops = jetty->ub_dev->ops; 54 return dev_ops->post_jetty_recv_wr(jetty, wr, bad_wr); 55 } 56 EXPORT_SYMBOL(ubcore_post_jetty_recv_wr); 57 > 58 int ubcore_post_jfs_wr(struct ubcore_jfs *jfs, const struct ubcore_jfs_wr *wr, 59 struct ubcore_jfs_wr **bad_wr) 60 { 61 struct ubcore_ops *dev_ops; 62 63 if (jfs == NULL || jfs->ub_dev == NULL || jfs->ub_dev->ops == NULL || 64 jfs->ub_dev->ops->post_jfs_wr == NULL || wr == NULL || bad_wr == NULL) { 65 ubcore_log_err("Invalid parameter"); 66 return -EINVAL; 67 } 68 69 dev_ops = jfs->ub_dev->ops; 70 return dev_ops->post_jfs_wr(jfs, wr, bad_wr); 71 } 72 EXPORT_SYMBOL(ubcore_post_jfs_wr); 73 > 74 int ubcore_post_jfr_wr(struct ubcore_jfr *jfr, const struct ubcore_jfr_wr *wr, 75 struct ubcore_jfr_wr **bad_wr) 76 { 77 struct ubcore_ops *dev_ops; 78 79 if (jfr == NULL || jfr->ub_dev == NULL || jfr->ub_dev->ops == NULL || 80 jfr->ub_dev->ops->post_jfr_wr == NULL || wr == NULL || bad_wr == NULL) { 81 ubcore_log_err("Invalid parameter"); 82 return -EINVAL; 83 } 84 85 dev_ops = jfr->ub_dev->ops; 86 return dev_ops->post_jfr_wr(jfr, wr, bad_wr); 87 } 88 EXPORT_SYMBOL(ubcore_post_jfr_wr); 89 > 90 int ubcore_poll_jfc(struct ubcore_jfc *jfc, int cr_cnt, struct ubcore_cr *cr) 91 { 92 struct ubcore_ops *dev_ops; 93 94 if (jfc == NULL || jfc->ub_dev == NULL || jfc->ub_dev->ops == NULL || 95 jfc->ub_dev->ops->poll_jfc == NULL || cr == NULL) { 96 ubcore_log_err("Invalid parameter"); 97 return -EINVAL; 98 } 99 100 dev_ops = jfc->ub_dev->ops; 101 return dev_ops->poll_jfc(jfc, cr_cnt, cr); 102 } 103 EXPORT_SYMBOL(ubcore_poll_jfc); 104 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

Kernel November 2024