March 2024 - Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] drm/bridge: sii902x: Fix probing race issue
by Ye Bin 05 Mar '24

05 Mar '24

From: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> mainline inclusion from mainline-v6.8-rc2 commit 08ac6f132dd77e40f786d8af51140c96c6d739c9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I94UOT Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ideasonboard.com> Fixes: 21d808405fe4 ("drm/bridge/sii902x: Fix EDID readback") Acked-by: Linus Walleij <linus.walleij(a)linaro.org> Link: https://lore.kernel.org/r/20240103-si902x-fixes-v1-1-b9fd3e448411@ideasonbo… Signed-off-by: Neil Armstrong <neil.armstrong(a)linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20240103-si902x-fixes-v1-1-b9… Signed-off-by: Ye Bin <yebin10(a)huawei.com> --- drivers/gpu/drm/bridge/sii902x.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c index 89558e581530..a3e7b7edb555 100644 --- a/drivers/gpu/drm/bridge/sii902x.c +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -998,11 +998,6 @@ static int sii902x_init(struct sii902x *sii902x) return ret; } - sii902x->bridge.funcs = &sii902x_bridge_funcs; - sii902x->bridge.of_node = dev->of_node; - sii902x->bridge.timings = &default_sii902x_timings; - drm_bridge_add(&sii902x->bridge); - sii902x_audio_codec_init(sii902x, dev); i2c_set_clientdata(sii902x->i2c, sii902x); @@ -1015,7 +1010,16 @@ static int sii902x_init(struct sii902x *sii902x) return -ENOMEM; sii902x->i2cmux->priv = sii902x; - return i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0); + ret = i2c_mux_add_adapter(sii902x->i2cmux, 0, 0, 0); + if (ret) + return ret; + + sii902x->bridge.funcs = &sii902x_bridge_funcs; + sii902x->bridge.of_node = dev->of_node; + sii902x->bridge.timings = &default_sii902x_timings; + drm_bridge_add(&sii902x->bridge); + + return 0; } static int sii902x_probe(struct i2c_client *client, @@ -1079,8 +1083,8 @@ static int sii902x_remove(struct i2c_client *client) { struct sii902x *sii902x = i2c_get_clientdata(client); - i2c_mux_del_adapters(sii902x->i2cmux); drm_bridge_remove(&sii902x->bridge); + i2c_mux_del_adapters(sii902x->i2cmux); regulator_bulk_disable(ARRAY_SIZE(sii902x->supplies), sii902x->supplies); -- 2.31.1

2 1

[PATCH v2 openEuler-1.0-LTS] bpf: Annotate bpf_long_memcpy with data_race
by Pu Lehui 04 Mar '24

04 Mar '24

From: Daniel Borkmann <daniel(a)iogearbox.net> mainline inclusion from mainline-v6.6-rc1 commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I95AWP CVE: CVE-2023-52521 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f(a)syzkaller.appspotmail.com Suggested-by: Marco Elver <elver(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Acked-by: Marco Elver <elver(a)google.com> Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.169334… Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 30fcf812df9d..cb0b31f5857d 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -511,7 +511,7 @@ static inline void bpf_long_memcpy(void *dst, const void *src, u32 size) size /= sizeof(long); while (size--) - *ldst++ = *lsrc++; + data_race(*ldst++ = *lsrc++); } /* verify correctness of eBPF program */ -- 2.34.1

2 1

[PATCH OLK-5.10 v2 0/2] btrfs: do not ASSERT() if the newly created subvolume already got read
by Long Li 04 Mar '24

04 Mar '24

This patch set fix CVE-2024-23850. Filipe Manana (1): btrfs: fix double free of anonymous device after snapshot creation failure Qu Wenruo (1): btrfs: do not ASSERT() if the newly created subvolume already got read fs/btrfs/disk-io.c | 29 +++++++++++++++++++---------- fs/btrfs/disk-io.h | 2 +- fs/btrfs/ioctl.c | 2 +- fs/btrfs/transaction.c | 2 +- 4 files changed, 22 insertions(+), 13 deletions(-) -- 2.31.1

2 3

[PATCH openEuler-1.0-LTS] bpf: Annotate bpf_long_memcpy with data_race
by Pu Lehui 04 Mar '24

04 Mar '24

From: Daniel Borkmann <daniel(a)iogearbox.net> mainline inclusion from mainline-v6.6-rc1 commit 6a86b5b5cd76d2734304a0173f5f01aa8aa2025e category: bugfix bugzilla: 189600 CVE: CVE-2023-52521 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a data race splat between two processes trying to update the same BPF map value via syscall on different CPUs: BUG: KCSAN: data-race in bpf_percpu_array_update / bpf_percpu_array_update write to 0xffffe8fffe7425d8 of 8 bytes by task 8257 on cpu 1: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd write to 0xffffe8fffe7425d8 of 8 bytes by task 8268 on cpu 0: bpf_long_memcpy include/linux/bpf.h:428 [inline] bpf_obj_memcpy include/linux/bpf.h:441 [inline] copy_map_value_long include/linux/bpf.h:464 [inline] bpf_percpu_array_update+0x3bb/0x500 kernel/bpf/arraymap.c:380 bpf_map_update_value+0x190/0x370 kernel/bpf/syscall.c:175 generic_map_update_batch+0x3ae/0x4f0 kernel/bpf/syscall.c:1749 bpf_map_do_batch+0x2df/0x3d0 kernel/bpf/syscall.c:4648 __sys_bpf+0x28a/0x780 __do_sys_bpf kernel/bpf/syscall.c:5241 [inline] __se_sys_bpf kernel/bpf/syscall.c:5239 [inline] __x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5239 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x0000000000000000 -> 0xfffffff000002788 The bpf_long_memcpy is used with 8-byte aligned pointers, power-of-8 size and forced to use long read/writes to try to atomically copy long counters. It is best-effort only and no barriers are here since it _will_ race with concurrent updates from BPF programs. The bpf_long_memcpy() is called from bpf(2) syscall. Marco suggested that the best way to make this known to KCSAN would be to use data_race() annotation. Reported-by: syzbot+97522333291430dd277f(a)syzkaller.appspotmail.com Suggested-by: Marco Elver <elver(a)google.com> Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Acked-by: Marco Elver <elver(a)google.com> Link: https://lore.kernel.org/bpf/000000000000d87a7f06040c970c@google.com Link: https://lore.kernel.org/bpf/57628f7a15e20d502247c3b55fceb1cb2b31f266.169334… Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 30fcf812df9d..cb0b31f5857d 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -511,7 +511,7 @@ static inline void bpf_long_memcpy(void *dst, const void *src, u32 size) size /= sizeof(long); while (size--) - *ldst++ = *lsrc++; + data_race(*ldst++ = *lsrc++); } /* verify correctness of eBPF program */ -- 2.34.1

2 1

[PATCH OLK-5.10] mm/damon/vaddr-test: fix memory leak in damon_do_test_apply_three_regions()
by Ze Zuo 04 Mar '24

04 Mar '24

From: Jinjie Ruan <ruanjinjie(a)huawei.com> mainline inclusion from mainline-v6.6-rc4 commit 45120b15743fa7c0aa53d5db6dfb4c8f87be4abd category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I95ATG CVE: CVE-2023-52560 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When CONFIG_DAMON_VADDR_KUNIT_TEST=y and making CONFIG_DEBUG_KMEMLEAK=y and CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN=y, the below memory leak is detected. Since commit 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables"), the damon_destroy_ctx() is removed, but still call damon_new_target() and damon_new_region(), the damon_region which is allocated by kmem_cache_alloc() in damon_new_region() and the damon_target which is allocated by kmalloc in damon_new_target() are not freed. And the damon_region which is allocated in damon_new_region() in damon_set_regions() is also not freed. So use damon_destroy_target to free all the damon_regions and damon_target. unreferenced object 0xffff888107c9a940 (size 64): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 60 c7 9c 07 81 88 ff ff f8 cb 9c 07 81 88 ff ff `............... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079cc740 (size 56): comm "kunit_try_catch", pid 1069, jiffies 4294670592 (age 732.761s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c82be>] damon_test_apply_three_regions1+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9ac40 (size 64): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk a0 cc 9c 07 81 88 ff ff 78 a1 76 07 81 88 ff ff ........x.v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff8881079ccc80 (size 56): comm "kunit_try_catch", pid 1071, jiffies 4294670595 (age 732.843s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c851e>] damon_test_apply_three_regions2+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888107c9af40 (size 64): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 06 00 00 00 6b 6b 6b 6b ............kkkk 20 a2 76 07 81 88 ff ff b8 a6 76 07 81 88 ff ff .v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a200 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.011s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 14 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819c7d91>] damon_do_test_apply_three_regions.constprop.0+0xd1/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776a740 (size 56): comm "kunit_try_catch", pid 1073, jiffies 4294670597 (age 733.025s) hex dump (first 32 bytes): 3d 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00 =.......?....... 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c877e>] damon_test_apply_three_regions3+0x21e/0x260 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff888108038240 (size 64): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 03 00 00 00 6b 6b 6b 6b ............kkkk 48 ad 76 07 81 88 ff ff 98 ae 76 07 81 88 ff ff H.v.......v..... backtrace: [<ffffffff817e0167>] kmalloc_trace+0x27/0xa0 [<ffffffff819c11cf>] damon_new_target+0x3f/0x1b0 [<ffffffff819c7d55>] damon_do_test_apply_three_regions.constprop.0+0x95/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 unreferenced object 0xffff88810776ad28 (size 56): comm "kunit_try_catch", pid 1075, jiffies 4294670600 (age 733.022s) hex dump (first 32 bytes): 05 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00 ................ 6b 6b 6b 6b 6b 6b 6b 6b 00 00 00 00 6b 6b 6b 6b kkkkkkkk....kkkk backtrace: [<ffffffff819bc492>] damon_new_region+0x22/0x1c0 [<ffffffff819bfcc2>] damon_set_regions+0x4c2/0x8e0 [<ffffffff819c7dbb>] damon_do_test_apply_three_regions.constprop.0+0xfb/0x3e0 [<ffffffff819c898d>] damon_test_apply_three_regions4+0x1cd/0x210 [<ffffffff829fce6a>] kunit_generic_run_threadfn_adapter+0x4a/0x90 [<ffffffff81237cf6>] kthread+0x2b6/0x380 [<ffffffff81097add>] ret_from_fork+0x2d/0x70 [<ffffffff81003791>] ret_from_fork_asm+0x11/0x20 Link: https://lkml.kernel.org/r/20230925072100.3725620-1-ruanjinjie@huawei.com Fixes: 9f86d624292c ("mm/damon/vaddr-test: remove unnecessary variables") Signed-off-by: Jinjie Ruan <ruanjinjie(a)huawei.com> Reviewed-by: SeongJae Park <sj(a)kernel.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Ze Zuo <zuoze1(a)huawei.com> --- mm/damon/vaddr-test.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/mm/damon/vaddr-test.h b/mm/damon/vaddr-test.h index d4f55f349100..a2a1e182929f 100644 --- a/mm/damon/vaddr-test.h +++ b/mm/damon/vaddr-test.h @@ -152,6 +152,8 @@ static void damon_do_test_apply_three_regions(struct kunit *test, KUNIT_EXPECT_EQ(test, r->ar.start, expected[i * 2]); KUNIT_EXPECT_EQ(test, r->ar.end, expected[i * 2 + 1]); } + + damon_destroy_target(t); } /* -- 2.25.1

2 1

[PATCH OLK-5.10 0/2] btrfs: do not ASSERT() if the newly created subvolume already got read
by Long Li 04 Mar '24

04 Mar '24

This patch set fix cve-2024-23850. Filipe Manana (1): btrfs: fix double free of anonymous device after snapshot creation failure Qu Wenruo (1): btrfs: do not ASSERT() if the newly created subvolume already got read fs/btrfs/disk-io.c | 29 +++++++++++++++++++---------- fs/btrfs/disk-io.h | 2 +- fs/btrfs/ioctl.c | 2 +- fs/btrfs/transaction.c | 2 +- 4 files changed, 22 insertions(+), 13 deletions(-) -- 2.31.1

2 3

[PATCH v1 OLK-6.6 0/4] kworker: Fix the problem of ipsan performance degradation
by jiangdongxu 04 Mar '24

04 Mar '24

From: shaodenghui <shaodenghui(a)huawei.com> When the current downstream FS tests IPSAN, it is found that the performance on ARM is much worse than that on X86, and the test data of IPSAN fluctuates greatly. After analysis, the reason is that when iscsi issues IO, the task is sent to kworker for processing by iscsi_xmitworker. The workqueue created by iscsi can automatically identify the CPU of the soft interrupt currently processed by iscsi, and automatically schedule the workqueue to the corresponding NUMA node. shaodenghui (3): iscsi: add member for NUMA aware order workqueue workqueue: implement NUMA affinity for single thread workqueue iscsi: use dynamic single thread workqueue to improve performance drivers/scsi/iscsi_tcp.c | 9 +++++++++ drivers/scsi/libiscsi.c | 17 ++++++++++++----- include/linux/workqueue.h | 1 + include/scsi/libiscsi.h | 1 + kernel/workqueue.c | 15 ++++++++++----- 5 files changed, 33 insertions(+), 10 deletions(-) -- 2.33.0

2 5

[PATCH openEuler-1.0-LTS 0/1] ARM: footbridge: remove personal server platform
by Huang Xiaojia 04 Mar '24

04 Mar '24

Russell King (1): ARM: footbridge: fix PCI interrupt mapping arch/arm/mach-footbridge/cats-pci.c | 4 ++-- arch/arm/mach-footbridge/ebsa285-pci.c | 4 ++-- arch/arm/mach-footbridge/netwinder-pci.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) -- 2.34.1

2 2

[PATCH v2 openEuler-1.0-LTS] HID: usbhid: fix info leak in hid_submit_ctrl
by Yu Liao 04 Mar '24

04 Mar '24

From: Anirudh Rayabharam <mail(a)anirudhrb.com> stable inclusion from stable-v4.19.196 commit 0e280502be1b003c3483ae03fc60dea554fcfa82 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I93XA7 CVE: CVE-2021-46906 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 6be388f4a35d2ce5ef7dbf635a8964a5da7f799f ] In hid_submit_ctrl(), the way of calculating the report length doesn't take into account that report->size can be zero. When running the syzkaller reproducer, a report of size 0 causes hid_submit_ctrl) to calculate transfer_buffer_length as 16384. When this urb is passed to the usb core layer, KMSAN reports an info leak of 16384 bytes. To fix this, first modify hid_report_len() to account for the zero report size case by using DIV_ROUND_UP for the division. Then, call it from hid_submit_ctrl(). Reported-by: syzbot+7c2bb71996f95a82524c(a)syzkaller.appspotmail.com Signed-off-by: Anirudh Rayabharam <mail(a)anirudhrb.com> Acked-by: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> Signed-off-by: Jiri Kosina <jkosina(a)suse.cz> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> --- drivers/hid/usbhid/hid-core.c | 2 +- include/linux/hid.h | 3 +-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c index 11103efebbaa..2376740ce4d5 100644 --- a/drivers/hid/usbhid/hid-core.c +++ b/drivers/hid/usbhid/hid-core.c @@ -377,7 +377,7 @@ static int hid_submit_ctrl(struct hid_device *hid) raw_report = usbhid->ctrl[usbhid->ctrltail].raw_report; dir = usbhid->ctrl[usbhid->ctrltail].dir; - len = ((report->size - 1) >> 3) + 1 + (report->id > 0); + len = hid_report_len(report); if (dir == USB_DIR_OUT) { usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0); usbhid->urbctrl->transfer_buffer_length = len; diff --git a/include/linux/hid.h b/include/linux/hid.h index 7f321909ec58..2053f3ee4395 100644 --- a/include/linux/hid.h +++ b/include/linux/hid.h @@ -1154,8 +1154,7 @@ static inline void hid_hw_wait(struct hid_device *hdev) */ static inline u32 hid_report_len(struct hid_report *report) { - /* equivalent to DIV_ROUND_UP(report->size, 8) + !!(report->id > 0) */ - return ((report->size - 1) >> 3) + 1 + (report->id > 0); + return DIV_ROUND_UP(report->size, 8) + (report->id > 0); } int hid_report_raw_event(struct hid_device *hid, int type, u8 *data, u32 size, -- 2.25.1

2 1

[PATCH v3 openEuler-1.0-LTS] usb: hub: Guard against accesses to uninitialized BOS descriptors
by Jinjiang Tu 04 Mar '24

04 Mar '24

From: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> stable inclusion from stable-v4.19.297 commit 8e7346bfea56453e31b7421c1c17ca2fb9ed613d category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I94P5J Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit f74a7afc224acd5e922c7a2e52244d891bbe44ee upstream. Many functions in drivers/usb/core/hub.c and drivers/usb/core/hub.h access fields inside udev->bos without checking if it was allocated and initialized. If usb_get_bos_descriptor() fails for whatever reason, udev->bos will be NULL and those accesses will result in a crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 5 PID: 17818 Comm: kworker/5:1 Tainted: G W 5.15.108-18910-gab0e1cb584e1 #1 <HASH:1f9e 1> Hardware name: Google Kindred/Kindred, BIOS Google_Kindred.12672.413.0 02/03/2021 Workqueue: usb_hub_wq hub_event RIP: 0010:hub_port_reset+0x193/0x788 Code: 89 f7 e8 20 f7 15 00 48 8b 43 08 80 b8 96 03 00 00 03 75 36 0f b7 88 92 03 00 00 81 f9 10 03 00 00 72 27 48 8b 80 a8 03 00 00 <48> 83 78 18 00 74 19 48 89 df 48 8b 75 b0 ba 02 00 00 00 4c 89 e9 RSP: 0018:ffffab740c53fcf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffa1bc5f678000 RCX: 0000000000000310 RDX: fffffffffffffdff RSI: 0000000000000286 RDI: ffffa1be9655b840 RBP: ffffab740c53fd70 R08: 00001b7d5edaa20c R09: ffffffffb005e060 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: ffffab740c53fd3e R14: 0000000000000032 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffa1be96540000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000018 CR3: 000000022e80c005 CR4: 00000000003706e0 Call Trace: hub_event+0x73f/0x156e ? hub_activate+0x5b7/0x68f process_one_work+0x1a2/0x487 worker_thread+0x11a/0x288 kthread+0x13a/0x152 ? process_one_work+0x487/0x487 ? kthread_associate_blkcg+0x70/0x70 ret_from_fork+0x1f/0x30 Fall back to a default behavior if the BOS descriptor isn't accessible and skip all the functionalities that depend on it: LPM support checks, Super Speed capabilitiy checks, U1/U2 states setup. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20230830100418.1952143-1-ricardo.canuelo@collabor… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- drivers/usb/core/hub.c | 28 ++++++++++++++++++++++++---- drivers/usb/core/hub.h | 2 +- 2 files changed, 25 insertions(+), 5 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index c6b16194f3cf..7750a304d7b4 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -138,6 +138,10 @@ int usb_device_supports_lpm(struct usb_device *udev) if (udev->quirks & USB_QUIRK_NO_LPM) return 0; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return 0; + /* USB 2.1 (and greater) devices indicate LPM support through * their USB 2.0 Extended Capabilities BOS descriptor. */ @@ -311,6 +315,10 @@ static void usb_set_lpm_parameters(struct usb_device *udev) if (!udev->lpm_capable || udev->speed < USB_SPEED_SUPER) return; + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + hub = usb_hub_to_struct_hub(udev->parent); /* It doesn't take time to transition the roothub into U0, since it * doesn't have an upstream link. @@ -2616,7 +2624,8 @@ int usb_authorize_device(struct usb_device *usb_dev) } /* - * Return 1 if port speed is SuperSpeedPlus, 0 otherwise + * Return 1 if port speed is SuperSpeedPlus, 0 otherwise or if the + * capability couldn't be checked. * check it from the link protocol field of the current speed ID attribute. * current speed ID is got from ext port status request. Sublink speed attribute * table is returned with the hub BOS SSP device capability descriptor @@ -2626,8 +2635,12 @@ static int port_speed_is_ssp(struct usb_device *hdev, int speed_id) int ssa_count; u32 ss_attr; int i; - struct usb_ssp_cap_descriptor *ssp_cap = hdev->bos->ssp_cap; + struct usb_ssp_cap_descriptor *ssp_cap; + if (!hdev->bos) + return 0; + + ssp_cap = hdev->bos->ssp_cap; if (!ssp_cap) return 0; @@ -3979,8 +3992,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout, ret; - __u8 u1_mel = udev->bos->ss_cap->bU1devExitLat; - __le16 u2_mel = udev->bos->ss_cap->bU2DevExitLat; + __u8 u1_mel; + __le16 u2_mel; + + /* Skip if the device BOS descriptor couldn't be read */ + if (!udev->bos) + return; + + u1_mel = udev->bos->ss_cap->bU1devExitLat; + u2_mel = udev->bos->ss_cap->bU2DevExitLat; /* If the device says it doesn't have *any* exit latency to come out of * U1 or U2, it's probably lying. Assume it doesn't implement that link diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 4accfb63f7dc..2ee899501220 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -138,7 +138,7 @@ static inline int hub_is_superspeedplus(struct usb_device *hdev) { return (hdev->descriptor.bDeviceProtocol == USB_HUB_PR_SS && le16_to_cpu(hdev->descriptor.bcdUSB) >= 0x0310 && - hdev->bos->ssp_cap); + hdev->bos && hdev->bos->ssp_cap); } static inline unsigned hub_power_on_good_delay(struct usb_hub *hub) -- 2.25.1

2 1