September 2024 - Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] drm/i915/gem: Fix Virtual Memory mapping boundaries calculation
by Cui GaoSheng 03 Sep '24

03 Sep '24

From: Andi Shyti <andi.shyti(a)linux.intel.com> stable inclusion from stable-v5.10.224 commit 50111a8098fb9ade621eeff82228a997d42732ab category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAMM9L CVE: CVE-2024-42259 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- commit 8bdd9ef7e9b1b2a73e394712b72b22055e0e26c3 upstream. Calculating the size of the mapped area as the lesser value between the requested size and the actual size does not consider the partial mapping offset. This can cause page fault access. Fix the calculation of the starting and ending addresses, the total size is now deduced from the difference between the end and start addresses. Additionally, the calculations have been rewritten in a clearer and more understandable form. Fixes: c58305af1835 ("drm/i915: Use remap_io_mapping() to prefault all PTE in a single pass") Reported-by: Jann Horn <jannh(a)google.com> Co-developed-by: Chris Wilson <chris.p.wilson(a)linux.intel.com> Signed-off-by: Chris Wilson <chris.p.wilson(a)linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti(a)linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Cc: Matthew Auld <matthew.auld(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: <stable(a)vger.kernel.org> # v4.9+ Reviewed-by: Jann Horn <jannh(a)google.com> Reviewed-by: Jonathan Cavitt <Jonathan.cavitt(a)intel.com> [Joonas: Add Requires: tag] Requires: 60a2066c5005 ("drm/i915/gem: Adjust vma offset for framebuffer mmap offset") Signed-off-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240802083850.103694-3-andi.… (cherry picked from commit 97b6784753da06d9d40232328efc5c5367e53417) Signed-off-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- drivers/gpu/drm/i915/gem/i915_gem_mman.c | 53 +++++++++++++++++++++--- 1 file changed, 47 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/i915/gem/i915_gem_mman.c b/drivers/gpu/drm/i915/gem/i915_gem_mman.c index 01a88b03bc6d..0021b039b72b 100644 --- a/drivers/gpu/drm/i915/gem/i915_gem_mman.c +++ b/drivers/gpu/drm/i915/gem/i915_gem_mman.c @@ -273,6 +273,41 @@ static vm_fault_t vm_fault_cpu(struct vm_fault *vmf) return i915_error_to_vmf_fault(err); } +static void set_address_limits(struct vm_area_struct *area, + struct i915_vma *vma, + unsigned long obj_offset, + unsigned long *start_vaddr, + unsigned long *end_vaddr) +{ + unsigned long vm_start, vm_end, vma_size; /* user's memory parameters */ + long start, end; /* memory boundaries */ + + /* + * Let's move into the ">> PAGE_SHIFT" + * domain to be sure not to lose bits + */ + vm_start = area->vm_start >> PAGE_SHIFT; + vm_end = area->vm_end >> PAGE_SHIFT; + vma_size = vma->size >> PAGE_SHIFT; + + /* + * Calculate the memory boundaries by considering the offset + * provided by the user during memory mapping and the offset + * provided for the partial mapping. + */ + start = vm_start; + start -= obj_offset; + start += vma->ggtt_view.partial.offset; + end = start + vma_size; + + start = max_t(long, start, vm_start); + end = min_t(long, end, vm_end); + + /* Let's move back into the "<< PAGE_SHIFT" domain */ + *start_vaddr = (unsigned long)start << PAGE_SHIFT; + *end_vaddr = (unsigned long)end << PAGE_SHIFT; +} + static vm_fault_t vm_fault_gtt(struct vm_fault *vmf) { #define MIN_CHUNK_PAGES (SZ_1M >> PAGE_SHIFT) @@ -285,14 +320,18 @@ static vm_fault_t vm_fault_gtt(struct vm_fault *vmf) struct i915_ggtt *ggtt = &i915->ggtt; bool write = area->vm_flags & VM_WRITE; struct i915_gem_ww_ctx ww; + unsigned long obj_offset; + unsigned long start, end; /* memory boundaries */ intel_wakeref_t wakeref; struct i915_vma *vma; pgoff_t page_offset; + unsigned long pfn; int srcu; int ret; - /* We don't use vmf->pgoff since that has the fake offset */ + obj_offset = area->vm_pgoff - drm_vma_node_start(&mmo->vma_node); page_offset = (vmf->address - area->vm_start) >> PAGE_SHIFT; + page_offset += obj_offset; trace_i915_gem_object_fault(obj, page_offset, true, write); @@ -363,12 +402,14 @@ static vm_fault_t vm_fault_gtt(struct vm_fault *vmf) if (ret) goto err_unpin; + set_address_limits(area, vma, obj_offset, &start, &end); + + pfn = (ggtt->gmadr.start + i915_ggtt_offset(vma)) >> PAGE_SHIFT; + pfn += (start - area->vm_start) >> PAGE_SHIFT; + pfn += obj_offset - vma->ggtt_view.partial.offset; + /* Finally, remap it using the new GTT offset */ - ret = remap_io_mapping(area, - area->vm_start + (vma->ggtt_view.partial.offset << PAGE_SHIFT), - (ggtt->gmadr.start + vma->node.start) >> PAGE_SHIFT, - min_t(u64, vma->size, area->vm_end - area->vm_start), - &ggtt->iomap); + ret = remap_io_mapping(area, start, pfn, end - start, &ggtt->iomap); if (ret) goto err_fence; -- 2.34.1

2 1

[PATCH OLK-5.10] mlxsw: spectrum_acl_erp: Fix object nesting warning
by Dong Chenchen 03 Sep '24

03 Sep '24

From: Ido Schimmel <idosch(a)nvidia.com> stable inclusion from stable-v5.10.223 commit 36a9996e020dd5aa325e0ecc55eb2328288ea6bb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IALEAO CVE: CVE-2024-43880 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 97d833ceb27dc19f8777d63f90be4a27b5daeedf ] ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> Tested-by: Alexander Zubkov <green(a)qrator.net> Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- .../ethernet/mellanox/mlxsw/spectrum_acl_erp.c | 13 ------------- include/linux/objagg.h | 1 - lib/objagg.c | 15 --------------- 3 files changed, 29 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c index d231f4d2888b..9eee229303cc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c @@ -1217,18 +1217,6 @@ static bool mlxsw_sp_acl_erp_delta_check(void *priv, const void *parent_obj, return err ? false : true; } -static int mlxsw_sp_acl_erp_hints_obj_cmp(const void *obj1, const void *obj2) -{ - const struct mlxsw_sp_acl_erp_key *key1 = obj1; - const struct mlxsw_sp_acl_erp_key *key2 = obj2; - - /* For hints purposes, two objects are considered equal - * in case the masks are the same. Does not matter what - * the "ctcam" value is. - */ - return memcmp(key1->mask, key2->mask, sizeof(key1->mask)); -} - static void *mlxsw_sp_acl_erp_delta_create(void *priv, void *parent_obj, void *obj) { @@ -1308,7 +1296,6 @@ static void mlxsw_sp_acl_erp_root_destroy(void *priv, void *root_priv) static const struct objagg_ops mlxsw_sp_acl_erp_objagg_ops = { .obj_size = sizeof(struct mlxsw_sp_acl_erp_key), .delta_check = mlxsw_sp_acl_erp_delta_check, - .hints_obj_cmp = mlxsw_sp_acl_erp_hints_obj_cmp, .delta_create = mlxsw_sp_acl_erp_delta_create, .delta_destroy = mlxsw_sp_acl_erp_delta_destroy, .root_create = mlxsw_sp_acl_erp_root_create, diff --git a/include/linux/objagg.h b/include/linux/objagg.h index 78021777df46..6df5b887dc54 100644 --- a/include/linux/objagg.h +++ b/include/linux/objagg.h @@ -8,7 +8,6 @@ struct objagg_ops { size_t obj_size; bool (*delta_check)(void *priv, const void *parent_obj, const void *obj); - int (*hints_obj_cmp)(const void *obj1, const void *obj2); void * (*delta_create)(void *priv, void *parent_obj, void *obj); void (*delta_destroy)(void *priv, void *delta_priv); void * (*root_create)(void *priv, void *obj, unsigned int root_id); diff --git a/lib/objagg.c b/lib/objagg.c index 5e1676ccdadd..6917d5974345 100644 --- a/lib/objagg.c +++ b/lib/objagg.c @@ -906,20 +906,6 @@ static const struct objagg_opt_algo *objagg_opt_algos[] = { [OBJAGG_OPT_ALGO_SIMPLE_GREEDY] = &objagg_opt_simple_greedy, }; -static int objagg_hints_obj_cmp(struct rhashtable_compare_arg *arg, - const void *obj) -{ - struct rhashtable *ht = arg->ht; - struct objagg_hints *objagg_hints = - container_of(ht, struct objagg_hints, node_ht); - const struct objagg_ops *ops = objagg_hints->ops; - const char *ptr = obj; - - ptr += ht->p.key_offset; - return ops->hints_obj_cmp ? ops->hints_obj_cmp(ptr, arg->key) : - memcmp(ptr, arg->key, ht->p.key_len); -} - /** * objagg_hints_get - obtains hints instance * @objagg: objagg instance @@ -958,7 +944,6 @@ struct objagg_hints *objagg_hints_get(struct objagg *objagg, offsetof(struct objagg_hints_node, obj); objagg_hints->ht_params.head_offset = offsetof(struct objagg_hints_node, ht_node); - objagg_hints->ht_params.obj_cmpfn = objagg_hints_obj_cmp; err = rhashtable_init(&objagg_hints->node_ht, &objagg_hints->ht_params); if (err) -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] mlxsw: spectrum_acl_erp: Fix object nesting warning
by Dong Chenchen 03 Sep '24

03 Sep '24

From: Ido Schimmel <idosch(a)nvidia.com> stable inclusion from stable-v5.10.223 commit 36a9996e020dd5aa325e0ecc55eb2328288ea6bb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IALEAO CVE: CVE-2024-43880 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 97d833ceb27dc19f8777d63f90be4a27b5daeedf ] ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 Fixes: 9069a3817d82 ("lib: objagg: implement optimization hints assembly and use hints for object creation") Signed-off-by: Ido Schimmel <idosch(a)nvidia.com> Reviewed-by: Amit Cohen <amcohen(a)nvidia.com> Tested-by: Alexander Zubkov <green(a)qrator.net> Signed-off-by: Petr Machata <petrm(a)nvidia.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- .../ethernet/mellanox/mlxsw/spectrum_acl_erp.c | 13 ------------- include/linux/objagg.h | 1 - lib/objagg.c | 15 --------------- 3 files changed, 29 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c index d231f4d2888b..9eee229303cc 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c @@ -1217,18 +1217,6 @@ static bool mlxsw_sp_acl_erp_delta_check(void *priv, const void *parent_obj, return err ? false : true; } -static int mlxsw_sp_acl_erp_hints_obj_cmp(const void *obj1, const void *obj2) -{ - const struct mlxsw_sp_acl_erp_key *key1 = obj1; - const struct mlxsw_sp_acl_erp_key *key2 = obj2; - - /* For hints purposes, two objects are considered equal - * in case the masks are the same. Does not matter what - * the "ctcam" value is. - */ - return memcmp(key1->mask, key2->mask, sizeof(key1->mask)); -} - static void *mlxsw_sp_acl_erp_delta_create(void *priv, void *parent_obj, void *obj) { @@ -1308,7 +1296,6 @@ static void mlxsw_sp_acl_erp_root_destroy(void *priv, void *root_priv) static const struct objagg_ops mlxsw_sp_acl_erp_objagg_ops = { .obj_size = sizeof(struct mlxsw_sp_acl_erp_key), .delta_check = mlxsw_sp_acl_erp_delta_check, - .hints_obj_cmp = mlxsw_sp_acl_erp_hints_obj_cmp, .delta_create = mlxsw_sp_acl_erp_delta_create, .delta_destroy = mlxsw_sp_acl_erp_delta_destroy, .root_create = mlxsw_sp_acl_erp_root_create, diff --git a/include/linux/objagg.h b/include/linux/objagg.h index 78021777df46..6df5b887dc54 100644 --- a/include/linux/objagg.h +++ b/include/linux/objagg.h @@ -8,7 +8,6 @@ struct objagg_ops { size_t obj_size; bool (*delta_check)(void *priv, const void *parent_obj, const void *obj); - int (*hints_obj_cmp)(const void *obj1, const void *obj2); void * (*delta_create)(void *priv, void *parent_obj, void *obj); void (*delta_destroy)(void *priv, void *delta_priv); void * (*root_create)(void *priv, void *obj, unsigned int root_id); diff --git a/lib/objagg.c b/lib/objagg.c index 5e1676ccdadd..6917d5974345 100644 --- a/lib/objagg.c +++ b/lib/objagg.c @@ -906,20 +906,6 @@ static const struct objagg_opt_algo *objagg_opt_algos[] = { [OBJAGG_OPT_ALGO_SIMPLE_GREEDY] = &objagg_opt_simple_greedy, }; -static int objagg_hints_obj_cmp(struct rhashtable_compare_arg *arg, - const void *obj) -{ - struct rhashtable *ht = arg->ht; - struct objagg_hints *objagg_hints = - container_of(ht, struct objagg_hints, node_ht); - const struct objagg_ops *ops = objagg_hints->ops; - const char *ptr = obj; - - ptr += ht->p.key_offset; - return ops->hints_obj_cmp ? ops->hints_obj_cmp(ptr, arg->key) : - memcmp(ptr, arg->key, ht->p.key_len); -} - /** * objagg_hints_get - obtains hints instance * @objagg: objagg instance @@ -958,7 +944,6 @@ struct objagg_hints *objagg_hints_get(struct objagg *objagg, offsetof(struct objagg_hints_node, obj); objagg_hints->ht_params.head_offset = offsetof(struct objagg_hints_node, ht_node); - objagg_hints->ht_params.obj_cmpfn = objagg_hints_obj_cmp; err = rhashtable_init(&objagg_hints->node_ht, &objagg_hints->ht_params); if (err) -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] xdp: fix invalid wait context of page_pool_destroy()
by Dong Chenchen 03 Sep '24

03 Sep '24

From: Taehee Yoo <ap420073(a)gmail.com> stable inclusion from stable-v5.10.224 commit be9d08ff102df3ac4f66e826ea935cf3af63a4bd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAKQ5B CVE: CVE-2024-43834 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 59a931c5b732ca5fc2ca727f5a72aeabaafa85ec ] If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe. Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.") Signed-off-by: Taehee Yoo <ap420073(a)gmail.com> Reviewed-by: Jakub Kicinski <kuba(a)kernel.org> Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- net/core/xdp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/core/xdp.c b/net/core/xdp.c index fd98d6059007..b2ad644df21f 100644 --- a/net/core/xdp.c +++ b/net/core/xdp.c @@ -124,10 +124,8 @@ void xdp_unreg_mem_model(struct xdp_mem_info *mem) return; if (type == MEM_TYPE_PAGE_POOL) { - rcu_read_lock(); - xa = rhashtable_lookup(mem_id_ht, &id, mem_id_rht_params); + xa = rhashtable_lookup_fast(mem_id_ht, &id, mem_id_rht_params); page_pool_destroy(xa->page_pool); - rcu_read_unlock(); } } EXPORT_SYMBOL_GPL(xdp_unreg_mem_model); -- 2.25.1

2 1

[PATCH OLK-5.10] xdp: fix invalid wait context of page_pool_destroy()
by Dong Chenchen 03 Sep '24

03 Sep '24

From: Taehee Yoo <ap420073(a)gmail.com> stable inclusion from stable-v5.10.224 commit be9d08ff102df3ac4f66e826ea935cf3af63a4bd category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAKQ5B CVE: CVE-2024-43834 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 59a931c5b732ca5fc2ca727f5a72aeabaafa85ec ] If the driver uses a page pool, it creates a page pool with page_pool_create(). The reference count of page pool is 1 as default. A page pool will be destroyed only when a reference count reaches 0. page_pool_destroy() is used to destroy page pool, it decreases a reference count. When a page pool is destroyed, ->disconnect() is called, which is mem_allocator_disconnect(). This function internally acquires mutex_lock(). If the driver uses XDP, it registers a memory model with xdp_rxq_info_reg_mem_model(). The xdp_rxq_info_reg_mem_model() internally increases a page pool reference count if a memory model is a page pool. Now the reference count is 2. To destroy a page pool, the driver should call both page_pool_destroy() and xdp_unreg_mem_model(). The xdp_unreg_mem_model() internally calls page_pool_destroy(). Only page_pool_destroy() decreases a reference count. If a driver calls page_pool_destroy() then xdp_unreg_mem_model(), we will face an invalid wait context warning. Because xdp_unreg_mem_model() calls page_pool_destroy() with rcu_read_lock(). The page_pool_destroy() internally acquires mutex_lock(). Splat looks like: ============================= [ BUG: Invalid wait context ] 6.10.0-rc6+ #4 Tainted: G W ----------------------------- ethtool/1806 is trying to lock: ffffffff90387b90 (mem_id_lock){+.+.}-{4:4}, at: mem_allocator_disconnect+0x73/0x150 other info that might help us debug this: context-{5:5} 3 locks held by ethtool/1806: stack backtrace: CPU: 0 PID: 1806 Comm: ethtool Tainted: G W 6.10.0-rc6+ #4 f916f41f172891c800f2fed Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 0603 11/01/2021 Call Trace: <TASK> dump_stack_lvl+0x7e/0xc0 __lock_acquire+0x1681/0x4de0 ? _printk+0x64/0xe0 ? __pfx_mark_lock.part.0+0x10/0x10 ? __pfx___lock_acquire+0x10/0x10 lock_acquire+0x1b3/0x580 ? mem_allocator_disconnect+0x73/0x150 ? __wake_up_klogd.part.0+0x16/0xc0 ? __pfx_lock_acquire+0x10/0x10 ? dump_stack_lvl+0x91/0xc0 __mutex_lock+0x15c/0x1690 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_prb_read_valid+0x10/0x10 ? mem_allocator_disconnect+0x73/0x150 ? __pfx_llist_add_batch+0x10/0x10 ? console_unlock+0x193/0x1b0 ? lockdep_hardirqs_on+0xbe/0x140 ? __pfx___mutex_lock+0x10/0x10 ? tick_nohz_tick_stopped+0x16/0x90 ? __irq_work_queue_local+0x1e5/0x330 ? irq_work_queue+0x39/0x50 ? __wake_up_klogd.part.0+0x79/0xc0 ? mem_allocator_disconnect+0x73/0x150 mem_allocator_disconnect+0x73/0x150 ? __pfx_mem_allocator_disconnect+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? rcu_is_watching+0x11/0xb0 page_pool_release+0x36e/0x6d0 page_pool_destroy+0xd7/0x440 xdp_unreg_mem_model+0x1a7/0x2a0 ? __pfx_xdp_unreg_mem_model+0x10/0x10 ? kfree+0x125/0x370 ? bnxt_free_ring.isra.0+0x2eb/0x500 ? bnxt_free_mem+0x5ac/0x2500 xdp_rxq_info_unreg+0x4a/0xd0 bnxt_free_mem+0x1356/0x2500 bnxt_close_nic+0xf0/0x3b0 ? __pfx_bnxt_close_nic+0x10/0x10 ? ethnl_parse_bit+0x2c6/0x6d0 ? __pfx___nla_validate_parse+0x10/0x10 ? __pfx_ethnl_parse_bit+0x10/0x10 bnxt_set_features+0x2a8/0x3e0 __netdev_update_features+0x4dc/0x1370 ? ethnl_parse_bitset+0x4ff/0x750 ? __pfx_ethnl_parse_bitset+0x10/0x10 ? __pfx___netdev_update_features+0x10/0x10 ? mark_held_locks+0xa5/0xf0 ? _raw_spin_unlock_irqrestore+0x42/0x70 ? __pm_runtime_resume+0x7d/0x110 ethnl_set_features+0x32d/0xa20 To fix this problem, it uses rhashtable_lookup_fast() instead of rhashtable_lookup() with rcu_read_lock(). Using xa without rcu_read_lock() here is safe. xa is freed by __xdp_mem_allocator_rcu_free() and this is called by call_rcu() of mem_xa_remove(). The mem_xa_remove() is called by page_pool_destroy() if a reference count reaches 0. The xa is already protected by the reference count mechanism well in the control plane. So removing rcu_read_lock() for page_pool_destroy() is safe. Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.") Signed-off-by: Taehee Yoo <ap420073(a)gmail.com> Reviewed-by: Jakub Kicinski <kuba(a)kernel.org> Link: https://patch.msgid.link/20240712095116.3801586-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- net/core/xdp.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/net/core/xdp.c b/net/core/xdp.c index fd98d6059007..b2ad644df21f 100644 --- a/net/core/xdp.c +++ b/net/core/xdp.c @@ -124,10 +124,8 @@ void xdp_unreg_mem_model(struct xdp_mem_info *mem) return; if (type == MEM_TYPE_PAGE_POOL) { - rcu_read_lock(); - xa = rhashtable_lookup(mem_id_ht, &id, mem_id_rht_params); + xa = rhashtable_lookup_fast(mem_id_ht, &id, mem_id_rht_params); page_pool_destroy(xa->page_pool); - rcu_read_unlock(); } } EXPORT_SYMBOL_GPL(xdp_unreg_mem_model); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS v4 00/30] support block hierarchy stats
by Yu Kuai 03 Sep '24

03 Sep '24

Changes in v4: - remove changes to cfq in patch 2, also fix kabi change for blk-wbt in patch 2; - check q->mq_ops from the only caller from blk-flush.c in patch 12; Changes in v3: - fix patch 7 format; Changes in v2: - find_get_pid(current->pid); -> get_pid(task_pid(current)); - check q->mq_ops in blk_mq_get_alloc_task(); - remove blk_mq_debugfs_unregister_hierarchy_stats(); - include cgroup_path() inside CONFIG_BLK_CGROUP; Bart Van Assche (1): blk-mq: remove blk_mq_put_ctx() Jens Axboe (4): block: add blk_time_get_ns() and blk_time_get() helpers block: cache current nsec time in struct blk_plug block: update cached timestamp post schedule/preemption block: limit block time caching to in_task() context Yu Kuai (25): blk-mq: export blk-mq-debugfs apis block: fix that blk_time_get_ns() doesn't update time after schedule block: fix kabi broken in struct blk_plug block: support to recored bio allocation time block: support to recored bio allocation task block: support to recored bio allocation time in request block: fix kabi broken for struct request block: support to recored bio allocation task in request block: block: fix kabi broken for struct blk_mq_alloc_data blk-mq-debugfs: factor out a new helper to show allocated request block: support to record when request is completed block-io-hierarchy: core hierarchy stats implementation block-io-hierarchy: core hierarchy iodump implementation blk-io-hierarchy: support to recored the number of slow IO blk-io-hierarchy: support new bio based stage blk-throtl blk-io-hierarchy: support new bio based stage blk-wbt blk-io-hierarchy: support new bio based stage gettag blk-io-hierarchy: support new rq based stage plug blk-io-hierarchy: support new rq based stage mq-deadline blk-io-hierarchy: support new rq based stage bfq blk-io-hierarchy: support new rq based stage kyber blk-io-hierarchy: support new rq based stage hctx blk-io-hierarchy: support new rq based stage requeue blk-io-hierarchy: support new rq based stage rq_driver blk-io-hierarchy: support new stage for bio lifetime arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + block/Kconfig | 8 + block/Makefile | 1 + block/bfq-cgroup.c | 15 +- block/bfq-iosched.c | 34 +- block/bio.c | 17 + block/blk-cgroup.c | 2 +- block/blk-core.c | 37 +- block/blk-flush.c | 21 +- block/blk-io-hierarchy/Kconfig | 145 +++++ block/blk-io-hierarchy/Makefile | 8 + block/blk-io-hierarchy/debugfs.c | 230 ++++++++ block/blk-io-hierarchy/iodump.c | 756 +++++++++++++++++++++++++ block/blk-io-hierarchy/iodump.h | 103 ++++ block/blk-io-hierarchy/stats.c | 429 ++++++++++++++ block/blk-io-hierarchy/stats.h | 371 ++++++++++++ block/blk-iolatency.c | 6 +- block/blk-merge.c | 1 + block/blk-mq-debugfs.c | 21 +- block/blk-mq-debugfs.h | 10 + block/blk-mq-sched.c | 7 +- block/blk-mq-tag.c | 13 +- block/blk-mq.c | 76 ++- block/blk-mq.h | 56 +- block/blk-sysfs.c | 16 + block/blk-throttle.c | 29 +- block/blk-wbt.c | 15 +- block/blk.h | 89 ++- block/kyber-iosched.c | 10 +- block/mq-deadline.c | 15 +- include/linux/blk_types.h | 55 +- include/linux/blkdev.h | 16 + include/linux/sched.h | 2 + kernel/sched/core.c | 6 +- 35 files changed, 2533 insertions(+), 89 deletions(-) create mode 100644 block/blk-io-hierarchy/Kconfig create mode 100644 block/blk-io-hierarchy/Makefile create mode 100644 block/blk-io-hierarchy/debugfs.c create mode 100644 block/blk-io-hierarchy/iodump.c create mode 100644 block/blk-io-hierarchy/iodump.h create mode 100644 block/blk-io-hierarchy/stats.c create mode 100644 block/blk-io-hierarchy/stats.h -- 2.39.2

2 31

[PATCH openEuler-1.0-LTS] nilfs2: handle inconsistent state in nilfs_btnode_create_block()
by Cui GaoSheng 03 Sep '24

03 Sep '24

From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> stable inclusion from stable-v4.19.320 commit 19cce46238ffe3546e44b9c74057103ff8b24c62 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAKQ0L CVE: CVE-2024-42295 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4811f7af6090e8f5a398fbdd766f903ef6c0d787 upstream. Syzbot reported that a buffer state inconsistency was detected in nilfs_btnode_create_block(), triggering a kernel bug. It is not appropriate to treat this inconsistency as a bug; it can occur if the argument block address (the buffer index of the newly created block) is a virtual block number and has been reallocated due to corruption of the bitmap used to manage its allocation state. So, modify nilfs_btnode_create_block() and its callers to treat it as a possible filesystem error, rather than triggering a kernel bug. Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com Fixes: a60be987d45d ("nilfs2: B-tree node cache") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Reported-by: syzbot+89cc4f2324ed37988b60(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60 Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- fs/nilfs2/btnode.c | 25 ++++++++++++++++++++----- fs/nilfs2/btree.c | 4 ++-- 2 files changed, 22 insertions(+), 7 deletions(-) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index ebb24a314f43..050cdb256da8 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -34,12 +34,21 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) bh = nilfs_grab_buffer(inode, btnc, blocknr, BIT(BH_NILFS_Node)); if (unlikely(!bh)) - return NULL; + return ERR_PTR(-ENOMEM); if (unlikely(buffer_mapped(bh) || buffer_uptodate(bh) || buffer_dirty(bh))) { - brelse(bh); - BUG(); + /* + * The block buffer at the specified new address was already + * in use. This can happen if it is a virtual block number + * and has been reallocated due to corruption of the bitmap + * used to manage its allocation state (if not, the buffer + * clearing of an abandoned b-tree node is missing somewhere). + */ + nilfs_error(inode->i_sb, + "state inconsistency probably due to duplicate use of b-tree node block address %llu (ino=%lu)", + (unsigned long long)blocknr, inode->i_ino); + goto failed; } memset(bh->b_data, 0, i_blocksize(inode)); bh->b_bdev = inode->i_sb->s_bdev; @@ -50,6 +59,12 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) unlock_page(bh->b_page); put_page(bh->b_page); return bh; + +failed: + unlock_page(bh->b_page); + put_page(bh->b_page); + brelse(bh); + return ERR_PTR(-EIO); } int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr, @@ -207,8 +222,8 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc, } nbh = nilfs_btnode_create_block(btnc, newkey); - if (!nbh) - return -ENOMEM; + if (IS_ERR(nbh)) + return PTR_ERR(nbh); BUG_ON(nbh == obh); ctxt->newbh = nbh; diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 7959d3c34d20..0e396e22b7b2 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -62,8 +62,8 @@ static int nilfs_btree_get_new_block(const struct nilfs_bmap *btree, struct buffer_head *bh; bh = nilfs_btnode_create_block(btnc, ptr); - if (!bh) - return -ENOMEM; + if (IS_ERR(bh)) + return PTR_ERR(bh); set_buffer_nilfs_volatile(bh); *bhp = bh; -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP1] nilfs2: handle inconsistent state in nilfs_btnode_create_block()
by Cui GaoSheng 03 Sep '24

03 Sep '24

From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> stable inclusion from stable-v5.10.224 commit 5f0a6800b8aec1b453c7fe4c44fcaac5ffe9d52e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAKQ0L CVE: CVE-2024-42295 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4811f7af6090e8f5a398fbdd766f903ef6c0d787 upstream. Syzbot reported that a buffer state inconsistency was detected in nilfs_btnode_create_block(), triggering a kernel bug. It is not appropriate to treat this inconsistency as a bug; it can occur if the argument block address (the buffer index of the newly created block) is a virtual block number and has been reallocated due to corruption of the bitmap used to manage its allocation state. So, modify nilfs_btnode_create_block() and its callers to treat it as a possible filesystem error, rather than triggering a kernel bug. Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com Fixes: a60be987d45d ("nilfs2: B-tree node cache") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Reported-by: syzbot+89cc4f2324ed37988b60(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60 Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- fs/nilfs2/btnode.c | 25 ++++++++++++++++++++----- fs/nilfs2/btree.c | 4 ++-- 2 files changed, 22 insertions(+), 7 deletions(-) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index e00e184b1261..793bd853d564 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -51,12 +51,21 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) bh = nilfs_grab_buffer(inode, btnc, blocknr, BIT(BH_NILFS_Node)); if (unlikely(!bh)) - return NULL; + return ERR_PTR(-ENOMEM); if (unlikely(buffer_mapped(bh) || buffer_uptodate(bh) || buffer_dirty(bh))) { - brelse(bh); - BUG(); + /* + * The block buffer at the specified new address was already + * in use. This can happen if it is a virtual block number + * and has been reallocated due to corruption of the bitmap + * used to manage its allocation state (if not, the buffer + * clearing of an abandoned b-tree node is missing somewhere). + */ + nilfs_error(inode->i_sb, + "state inconsistency probably due to duplicate use of b-tree node block address %llu (ino=%lu)", + (unsigned long long)blocknr, inode->i_ino); + goto failed; } memset(bh->b_data, 0, i_blocksize(inode)); bh->b_bdev = inode->i_sb->s_bdev; @@ -67,6 +76,12 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) unlock_page(bh->b_page); put_page(bh->b_page); return bh; + +failed: + unlock_page(bh->b_page); + put_page(bh->b_page); + brelse(bh); + return ERR_PTR(-EIO); } int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr, @@ -217,8 +232,8 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc, } nbh = nilfs_btnode_create_block(btnc, newkey); - if (!nbh) - return -ENOMEM; + if (IS_ERR(nbh)) + return PTR_ERR(nbh); BUG_ON(nbh == obh); ctxt->newbh = nbh; diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 77efd69213a3..270c5422df86 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -63,8 +63,8 @@ static int nilfs_btree_get_new_block(const struct nilfs_bmap *btree, struct buffer_head *bh; bh = nilfs_btnode_create_block(btnc, ptr); - if (!bh) - return -ENOMEM; + if (IS_ERR(bh)) + return PTR_ERR(bh); set_buffer_nilfs_volatile(bh); *bhp = bh; -- 2.34.1

2 1

[PATCH OLK-5.10] nilfs2: handle inconsistent state in nilfs_btnode_create_block()
by Cui GaoSheng 03 Sep '24

03 Sep '24

From: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> stable inclusion from stable-v5.10.224 commit 5f0a6800b8aec1b453c7fe4c44fcaac5ffe9d52e category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAKQ0L CVE: CVE-2024-42295 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4811f7af6090e8f5a398fbdd766f903ef6c0d787 upstream. Syzbot reported that a buffer state inconsistency was detected in nilfs_btnode_create_block(), triggering a kernel bug. It is not appropriate to treat this inconsistency as a bug; it can occur if the argument block address (the buffer index of the newly created block) is a virtual block number and has been reallocated due to corruption of the bitmap used to manage its allocation state. So, modify nilfs_btnode_create_block() and its callers to treat it as a possible filesystem error, rather than triggering a kernel bug. Link: https://lkml.kernel.org/r/20240725052007.4562-1-konishi.ryusuke@gmail.com Fixes: a60be987d45d ("nilfs2: B-tree node cache") Signed-off-by: Ryusuke Konishi <konishi.ryusuke(a)gmail.com> Reported-by: syzbot+89cc4f2324ed37988b60(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=89cc4f2324ed37988b60 Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- fs/nilfs2/btnode.c | 25 ++++++++++++++++++++----- fs/nilfs2/btree.c | 4 ++-- 2 files changed, 22 insertions(+), 7 deletions(-) diff --git a/fs/nilfs2/btnode.c b/fs/nilfs2/btnode.c index 1776121677e2..28a726553318 100644 --- a/fs/nilfs2/btnode.c +++ b/fs/nilfs2/btnode.c @@ -51,12 +51,21 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) bh = nilfs_grab_buffer(inode, btnc, blocknr, BIT(BH_NILFS_Node)); if (unlikely(!bh)) - return NULL; + return ERR_PTR(-ENOMEM); if (unlikely(buffer_mapped(bh) || buffer_uptodate(bh) || buffer_dirty(bh))) { - brelse(bh); - BUG(); + /* + * The block buffer at the specified new address was already + * in use. This can happen if it is a virtual block number + * and has been reallocated due to corruption of the bitmap + * used to manage its allocation state (if not, the buffer + * clearing of an abandoned b-tree node is missing somewhere). + */ + nilfs_error(inode->i_sb, + "state inconsistency probably due to duplicate use of b-tree node block address %llu (ino=%lu)", + (unsigned long long)blocknr, inode->i_ino); + goto failed; } memset(bh->b_data, 0, i_blocksize(inode)); bh->b_bdev = inode->i_sb->s_bdev; @@ -67,6 +76,12 @@ nilfs_btnode_create_block(struct address_space *btnc, __u64 blocknr) unlock_page(bh->b_page); put_page(bh->b_page); return bh; + +failed: + unlock_page(bh->b_page); + put_page(bh->b_page); + brelse(bh); + return ERR_PTR(-EIO); } int nilfs_btnode_submit_block(struct address_space *btnc, __u64 blocknr, @@ -217,8 +232,8 @@ int nilfs_btnode_prepare_change_key(struct address_space *btnc, } nbh = nilfs_btnode_create_block(btnc, newkey); - if (!nbh) - return -ENOMEM; + if (IS_ERR(nbh)) + return PTR_ERR(nbh); BUG_ON(nbh == obh); ctxt->newbh = nbh; diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c index 4905b7cd7bf3..a426e4e2acda 100644 --- a/fs/nilfs2/btree.c +++ b/fs/nilfs2/btree.c @@ -63,8 +63,8 @@ static int nilfs_btree_get_new_block(const struct nilfs_bmap *btree, struct buffer_head *bh; bh = nilfs_btnode_create_block(btnc, ptr); - if (!bh) - return -ENOMEM; + if (IS_ERR(bh)) + return PTR_ERR(bh); set_buffer_nilfs_volatile(bh); *bhp = bh; -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] ibmvnic: free reset-work-item when flushing
by Dong Chenchen 03 Sep '24

03 Sep '24

From: Sukadev Bhattiprolu <sukadev(a)linux.ibm.com> stable inclusion from stable-v4.19.233 commit 786576c03b313a9ff6585458aa0dfd039d897f51 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IALPUM CVE: CVE-2022-48905 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 8d0657f39f487d904fca713e0bc39c2707382553 upstream. Fix a tiny memory leak when flushing the reset work queue. Fixes: 2770a7984db5 ("ibmvnic: Introduce hard reset recovery") Signed-off-by: Sukadev Bhattiprolu <sukadev(a)linux.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- drivers/net/ethernet/ibm/ibmvnic.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index 8a1916443235..1e9193b8ad94 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -2081,8 +2081,10 @@ static int ibmvnic_reset(struct ibmvnic_adapter *adapter, * flush reset queue and process this reset */ if (adapter->force_reset_recovery && !list_empty(&adapter->rwi_list)) { - list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) + list_for_each_safe(entry, tmp_entry, &adapter->rwi_list) { list_del(entry); + kfree(list_entry(entry, struct ibmvnic_rwi, list)); + } } rwi->reset_reason = reason; list_add_tail(&rwi->list, &adapter->rwi_list); -- 2.25.1

2 1

2024

2023

2022

2021

2020

2019

Kernel September 2024