- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6] iomap: fix dirty range tracking in iomap_folio_mkwrite_iter
by Long Li 16 Dec '25

16 Dec '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IDCSJV ----------------------------------------- When I test xfs with fsstress, got the following assert message: XFS (sda): ino 1a0b0a data fork has delalloc extent at [0x186:0x1] XFS: Assertion failed: 0, file: fs/xfs/xfs_icache.c, line: 1819 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:102! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 940 Comm: kworker/3:1 Not tainted 6.6.0-g3697dae9bfac #192 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Workqueue: xfs-inodegc/sda xfs_inodegc_worker RIP: 0010:assfail+0x54/0x60 RSP: 0018:ffffc90003113e08 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff8880651dd800 RCX: 000000007fffffff RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff82a12e0c RBP: ffffffffffffff20 R08: 00000000000025c2 R09: 0000000000000000 R10: 000000000000000a R11: 000000000000000a R12: 0000000000000000 R13: ffffffffffffff20 R14: ffff888077948000 R15: 0000000004208060 FS: 0000000000000000(0000) GS:ffff8880bcb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000561be0e1cf30 CR3: 0000000075fa4000 CR4: 00000000000006e0 Call Trace: <TASK> xfs_inodegc_set_reclaimable+0x1f1/0x220 xfs_inodegc_worker+0x10b/0x2e0 process_scheduled_works+0x1a5/0x5e0 worker_thread+0x1d1/0x4f0 ? apply_workqueue_attrs+0x70/0x70 kthread+0x149/0x1c0 ? kthread_exit+0x50/0x50 ret_from_fork+0x52/0x70 ? kthread_exit+0x50/0x50 ret_from_fork_asm+0x11/0x20 </TASK> Fix the incorrect dirty range tracking in iomap_folio_mkwrite_iter() which could lead to blocks being missed during writeback. Previously, iomap_set_range_dirty() was called with a wrong offset (0), which may cause some modified blocks not being marked as dirty and thus skip writeback. Calculate the correct offset within the folio from the iterator position to ensure all modified blocks are properly marked dirty and written back. Fixes: 0b4d2d8fba90 ("iomap: correct the dirty length in page mkwrite") Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/iomap/buffered-io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/iomap/buffered-io.c b/fs/iomap/buffered-io.c index 7a417bd8a9f3..33fbb3f8d45f 100644 --- a/fs/iomap/buffered-io.c +++ b/fs/iomap/buffered-io.c @@ -1562,10 +1562,12 @@ static loff_t iomap_folio_mkwrite_iter(struct iomap_iter *iter, return ret; block_commit_write(&folio->page, 0, length); } else { + size_t poff = offset_in_folio(folio, iter->pos); + WARN_ON_ONCE(!folio_test_uptodate(folio)); ifs_alloc(iter->inode, folio, 0); - iomap_set_range_dirty(folio, 0, length); + iomap_set_range_dirty(folio, poff, length); } return length; -- 2.39.2

2 1

[PATCH OLK-6.6] i40e: remove read access to debugfs files
by Wang Liang 16 Dec '25

16 Dec '25

From: Jacob Keller <jacob.e.keller(a)intel.com> mainline inclusion from mainline-v6.17-rc5 commit 9fcdb1c3c4ba134434694c001dbff343f1ffa319 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ID0R34 CVE: CVE-2025-39901 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The 'command' and 'netdev_ops' debugfs files are a legacy debugging interface supported by the i40e driver since its early days by commit 02e9c290814c ("i40e: debugfs interface"). Both of these debugfs files provide a read handler which is mostly useless, and which is implemented with questionable logic. They both use a static 256 byte buffer which is initialized to the empty string. In the case of the 'command' file this buffer is literally never used and simply wastes space. In the case of the 'netdev_ops' file, the last command written is saved here. On read, the files contents are presented as the name of the device followed by a colon and then the contents of their respective static buffer. For 'command' this will always be "<device>: ". For 'netdev_ops', this will be "<device>: <last command written>". But note the buffer is shared between all devices operated by this module. At best, it is mostly meaningless information, and at worse it could be accessed simultaneously as there doesn't appear to be any locking mechanism. We have also recently received multiple reports for both read functions about their use of snprintf and potential overflow that could result in reading arbitrary kernel memory. For the 'command' file, this is definitely impossible, since the static buffer is always zero and never written to. For the 'netdev_ops' file, it does appear to be possible, if the user carefully crafts the command input, it will be copied into the buffer, which could be large enough to cause snprintf to truncate, which then causes the copy_to_user to read beyond the length of the buffer allocated by kzalloc. A minimal fix would be to replace snprintf() with scnprintf() which would cap the return to the number of bytes written, preventing an overflow. A more involved fix would be to drop the mostly useless static buffers, saving 512 bytes and modifying the read functions to stop needing those as input. Instead, lets just completely drop the read access to these files. These are debug interfaces exposed as part of debugfs, and I don't believe that dropping read access will break any script, as the provided output is pretty useless. You can find the netdev name through other more standard interfaces, and the 'netdev_ops' interface can easily result in garbage if you issue simultaneous writes to multiple devices at once. In order to properly remove the i40e_dbg_netdev_ops_buf, we need to refactor its write function to avoid using the static buffer. Instead, use the same logic as the i40e_dbg_command_write, with an allocated buffer. Update the code to use this instead of the static buffer, and ensure we free the buffer on exit. This fixes simultaneous writes to 'netdev_ops' on multiple devices, and allows us to remove the now unused static buffer along with removing the read access. Fixes: 02e9c290814c ("i40e: debugfs interface") Reported-by: Kunwu Chan <chentao(a)kylinos.cn> Closes: https://lore.kernel.org/intel-wired-lan/20231208031950.47410-1-chentao@kyli… Reported-by: Wang Haoran <haoranwangsec(a)gmail.com> Closes: https://lore.kernel.org/all/CANZ3JQRRiOdtfQJoP9QM=6LS1Jto8PGBGw6y7-TL=BcnzH… Reported-by: Amir Mohammad Jahangirzad <a.jahangirzad(a)gmail.com> Closes: https://lore.kernel.org/all/20250722115017.206969-1-a.jahangirzad@gmail.com/ Signed-off-by: Jacob Keller <jacob.e.keller(a)intel.com> Reviewed-by: Dawid Osuchowski <dawid.osuchowski(a)linux.intel.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov(a)intel.com> Reviewed-by: Simon Horman <horms(a)kernel.org> Reviewed-by: Kunwu Chan <kunwu.chan(a)linux.dev> Tested-by: Rinitha S <sx.rinitha(a)intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen(a)intel.com> Conflicts: drivers/net/ethernet/intel/i40e/i40e_debugfs.c [conflicts due to not merge 43f4466ca91d ("i40e: Add helper to access main VSI")] Signed-off-by: Wang Liang <wangliang74(a)huawei.com> --- .../net/ethernet/intel/i40e/i40e_debugfs.c | 121 +++--------------- 1 file changed, 19 insertions(+), 102 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c index a2fca58a91c3..35ce578dd6f3 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_debugfs.c +++ b/drivers/net/ethernet/intel/i40e/i40e_debugfs.c @@ -58,47 +58,6 @@ static struct i40e_veb *i40e_dbg_find_veb(struct i40e_pf *pf, int seid) * setup, adding or removing filters, or other things. Many of * these will be useful for some forms of unit testing. **************************************************************/ -static char i40e_dbg_command_buf[256] = ""; - -/** - * i40e_dbg_command_read - read for command datum - * @filp: the opened file - * @buffer: where to write the data for the user to read - * @count: the size of the user's buffer - * @ppos: file position offset - **/ -static ssize_t i40e_dbg_command_read(struct file *filp, char __user *buffer, - size_t count, loff_t *ppos) -{ - struct i40e_pf *pf = filp->private_data; - int bytes_not_copied; - int buf_size = 256; - char *buf; - int len; - - /* don't allow partial reads */ - if (*ppos != 0) - return 0; - if (count < buf_size) - return -ENOSPC; - - buf = kzalloc(buf_size, GFP_KERNEL); - if (!buf) - return -ENOSPC; - - len = snprintf(buf, buf_size, "%s: %s\n", - pf->vsi[pf->lan_vsi]->netdev->name, - i40e_dbg_command_buf); - - bytes_not_copied = copy_to_user(buffer, buf, len); - kfree(buf); - - if (bytes_not_copied) - return -EFAULT; - - *ppos = len; - return len; -} static char *i40e_filter_state_string[] = { "INVALID", @@ -1637,7 +1596,6 @@ static ssize_t i40e_dbg_command_write(struct file *filp, static const struct file_operations i40e_dbg_command_fops = { .owner = THIS_MODULE, .open = simple_open, - .read = i40e_dbg_command_read, .write = i40e_dbg_command_write, }; @@ -1646,47 +1604,6 @@ static const struct file_operations i40e_dbg_command_fops = { * The netdev_ops entry in debugfs is for giving the driver commands * to be executed from the netdev operations. **************************************************************/ -static char i40e_dbg_netdev_ops_buf[256] = ""; - -/** - * i40e_dbg_netdev_ops_read - read for netdev_ops datum - * @filp: the opened file - * @buffer: where to write the data for the user to read - * @count: the size of the user's buffer - * @ppos: file position offset - **/ -static ssize_t i40e_dbg_netdev_ops_read(struct file *filp, char __user *buffer, - size_t count, loff_t *ppos) -{ - struct i40e_pf *pf = filp->private_data; - int bytes_not_copied; - int buf_size = 256; - char *buf; - int len; - - /* don't allow partal reads */ - if (*ppos != 0) - return 0; - if (count < buf_size) - return -ENOSPC; - - buf = kzalloc(buf_size, GFP_KERNEL); - if (!buf) - return -ENOSPC; - - len = snprintf(buf, buf_size, "%s: %s\n", - pf->vsi[pf->lan_vsi]->netdev->name, - i40e_dbg_netdev_ops_buf); - - bytes_not_copied = copy_to_user(buffer, buf, len); - kfree(buf); - - if (bytes_not_copied) - return -EFAULT; - - *ppos = len; - return len; -} /** * i40e_dbg_netdev_ops_write - write into netdev_ops datum @@ -1700,35 +1617,36 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp, size_t count, loff_t *ppos) { struct i40e_pf *pf = filp->private_data; + char *cmd_buf, *buf_tmp; int bytes_not_copied; struct i40e_vsi *vsi; - char *buf_tmp; int vsi_seid; int i, cnt; /* don't allow partial writes */ if (*ppos != 0) return 0; - if (count >= sizeof(i40e_dbg_netdev_ops_buf)) - return -ENOSPC; - memset(i40e_dbg_netdev_ops_buf, 0, sizeof(i40e_dbg_netdev_ops_buf)); - bytes_not_copied = copy_from_user(i40e_dbg_netdev_ops_buf, - buffer, count); - if (bytes_not_copied) + cmd_buf = kzalloc(count + 1, GFP_KERNEL); + if (!cmd_buf) + return count; + bytes_not_copied = copy_from_user(cmd_buf, buffer, count); + if (bytes_not_copied) { + kfree(cmd_buf); return -EFAULT; - i40e_dbg_netdev_ops_buf[count] = '\0'; + } + cmd_buf[count] = '\0'; - buf_tmp = strchr(i40e_dbg_netdev_ops_buf, '\n'); + buf_tmp = strchr(cmd_buf, '\n'); if (buf_tmp) { *buf_tmp = '\0'; - count = buf_tmp - i40e_dbg_netdev_ops_buf + 1; + count = buf_tmp - cmd_buf + 1; } - if (strncmp(i40e_dbg_netdev_ops_buf, "change_mtu", 10) == 0) { + if (strncmp(cmd_buf, "change_mtu", 10) == 0) { int mtu; - cnt = sscanf(&i40e_dbg_netdev_ops_buf[11], "%i %i", + cnt = sscanf(&cmd_buf[11], "%i %i", &vsi_seid, &mtu); if (cnt != 2) { dev_info(&pf->pdev->dev, "change_mtu <vsi_seid> <mtu>\n"); @@ -1750,8 +1668,8 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp, dev_info(&pf->pdev->dev, "Could not acquire RTNL - please try again\n"); } - } else if (strncmp(i40e_dbg_netdev_ops_buf, "set_rx_mode", 11) == 0) { - cnt = sscanf(&i40e_dbg_netdev_ops_buf[11], "%i", &vsi_seid); + } else if (strncmp(cmd_buf, "set_rx_mode", 11) == 0) { + cnt = sscanf(&cmd_buf[11], "%i", &vsi_seid); if (cnt != 1) { dev_info(&pf->pdev->dev, "set_rx_mode <vsi_seid>\n"); goto netdev_ops_write_done; @@ -1771,8 +1689,8 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp, dev_info(&pf->pdev->dev, "Could not acquire RTNL - please try again\n"); } - } else if (strncmp(i40e_dbg_netdev_ops_buf, "napi", 4) == 0) { - cnt = sscanf(&i40e_dbg_netdev_ops_buf[4], "%i", &vsi_seid); + } else if (strncmp(cmd_buf, "napi", 4) == 0) { + cnt = sscanf(&cmd_buf[4], "%i", &vsi_seid); if (cnt != 1) { dev_info(&pf->pdev->dev, "napi <vsi_seid>\n"); goto netdev_ops_write_done; @@ -1790,21 +1708,20 @@ static ssize_t i40e_dbg_netdev_ops_write(struct file *filp, dev_info(&pf->pdev->dev, "napi called\n"); } } else { - dev_info(&pf->pdev->dev, "unknown command '%s'\n", - i40e_dbg_netdev_ops_buf); + dev_info(&pf->pdev->dev, "unknown command '%s'\n", cmd_buf); dev_info(&pf->pdev->dev, "available commands\n"); dev_info(&pf->pdev->dev, " change_mtu <vsi_seid> <mtu>\n"); dev_info(&pf->pdev->dev, " set_rx_mode <vsi_seid>\n"); dev_info(&pf->pdev->dev, " napi <vsi_seid>\n"); } netdev_ops_write_done: + kfree(cmd_buf); return count; } static const struct file_operations i40e_dbg_netdev_ops_fops = { .owner = THIS_MODULE, .open = simple_open, - .read = i40e_dbg_netdev_ops_read, .write = i40e_dbg_netdev_ops_write, }; -- 2.34.1

2 1

[PATCH OLK-6.6 0/2] ARM: fix hash_name() issue
by Zizhi Wo 16 Dec '25

16 Dec '25

Fix hash_name() issue. Russell King (Oracle) (2): ARM: allow __do_kernel_fault() to report execution of memory faults ARM: fix hash_name() fault arch/arm/mm/fault.c | 57 +++++++++++++++++++++++++++++++++++++-------- 1 file changed, 47 insertions(+), 10 deletions(-) -- 2.39.2

2 3

[PATCH OLK-5.10 0/2] ARM: fix hash_name() issue
by Zizhi Wo 16 Dec '25

16 Dec '25

Fix hash_name() issue. Russell King (Oracle) (2): ARM: allow __do_kernel_fault() to report execution of memory faults ARM: fix hash_name() fault arch/arm/mm/fault.c | 63 +++++++++++++++++++++++++++++++++++---------- 1 file changed, 50 insertions(+), 13 deletions(-) -- 2.39.2

2 3

[PATCH OLK-6.6 1/2] ARM: allow __do_kernel_fault() to report execution of memory faults
by Zizhi Wo 16 Dec '25

16 Dec '25

From: "Russell King (Oracle)" <rmk+kernel(a)armlinux.org.uk> mainline inclusion from mainline-v6.19-rc1 commit 40b466db1dffb41f0529035c59c5739636d0e5b8 category: other bugzilla: https://gitee.com/openeuler/kernel/issues/IDD7MD Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Allow __do_kernel_fault() to detect the execution of memory, so we can provide the same fault message as do_page_fault() would do. This is required when we split the kernel address fault handling from the main do_page_fault() code path. Reviewed-by: Xie Yuanbin <xieyuanbin1(a)huawei.com> Tested-by: Xie Yuanbin <xieyuanbin1(a)huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel(a)armlinux.org.uk> Conflicts: arch/arm/mm/fault.c [There is a compilation error because the definition of is_permission_fault() comes after __do_kernel_fault(). Referring to Russell King's follow-up change: "Group is_permission_fault() with is_translation_fault(), which is needed to use is_permission_fault() in __do_kernel_fault(). As this is static inline, there is no need for this to be under CONFIG_MMU."] Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm/mm/fault.c | 28 +++++++++++++++------------- 1 file changed, 15 insertions(+), 13 deletions(-) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index ed1a25f457e4..4c0ee81befb1 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -128,6 +128,19 @@ static inline bool is_translation_fault(unsigned int fsr) return false; } +static inline bool is_permission_fault(unsigned int fsr) +{ + int fs = fsr_fs(fsr); +#ifdef CONFIG_ARM_LPAE + if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL) + return true; +#else + if (fs == FS_L1_PERM || fs == FS_L2_PERM) + return true; +#endif + return false; +} + static void die_kernel_fault(const char *msg, struct mm_struct *mm, unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -163,6 +176,8 @@ __do_kernel_fault(struct mm_struct *mm, unsigned long addr, unsigned int fsr, */ if (addr < PAGE_SIZE) { msg = "NULL pointer dereference"; + } else if (is_permission_fault(fsr) && fsr & FSR_LNX_PF) { + msg = "execution of memory"; } else { if (is_translation_fault(fsr) && kfence_handle_page_fault(addr, is_write_fault(fsr), regs)) @@ -229,19 +244,6 @@ void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs) #define VM_FAULT_BADMAP ((__force vm_fault_t)0x010000) #define VM_FAULT_BADACCESS ((__force vm_fault_t)0x020000) -static inline bool is_permission_fault(unsigned int fsr) -{ - int fs = fsr_fs(fsr); -#ifdef CONFIG_ARM_LPAE - if ((fs & FS_MMU_NOLL_MASK) == FS_PERM_NOLL) - return true; -#else - if (fs == FS_L1_PERM || fs == FS_L2_PERM) - return true; -#endif - return false; -} - static int __kprobes do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) { -- 2.39.2

2 2

[PATCH OLK-5.10 0/2] Fix CVE-2025-39810
by Zhao Yipeng 16 Dec '25

16 Dec '25

Michael Chan (1): [Backport] bnxt_en: Fix possible crash after creating sw mqprio TCs Sreekanth Reddy (1): [Backport] bnxt_en: Fix memory corruption when FW resources change during ifdown drivers/net/ethernet/broadcom/bnxt/bnxt.c | 34 ++++++++++++++----- drivers/net/ethernet/broadcom/bnxt/bnxt.h | 1 + drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 2 +- .../net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 4 +-- drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 2 +- 5 files changed, 30 insertions(+), 13 deletions(-) -- 2.34.1

2 3

openEuler Kernel SIG双周例会
by openEuler conference 16 Dec '25

16 Dec '25

您好！ Kernel 邀请您参加 2025-12-19 14:00 召开的WeLink会议(自动录制) 会议主题：openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中（新增议题可回复本邮件申请，或填报至会议纪要看板）会议链接：https://meeting.huaweicloud.com:36443/#/j/962719880 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 更多资讯尽在：https://www.openeuler.org/zh/ Hello! Kernel invites you to attend the WeLink conference(auto recording) will be held at 2025-12-19 14:00, The subject of the conference is openEuler Kernel SIG双周例会 Summary: 1. 进展update 2. 议题征集中（新增议题可回复本邮件申请，或填报至会议纪要看板） You can join the meeting at https://meeting.huaweicloud.com:36443/#/j/962719880 Add topics at https://etherpad.openeuler.org/p/Kernel-meetings More information: https://www.openeuler.org/en/

1 0

[PATCH OLK-6.6] arm64/mpam: Synchronize MPAM Partid to kernel mode
by Zeng Heng 15 Dec '25

15 Dec '25

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IDD55N -------------------------------- Currently, the MPAM implementation on Linux only applies isolation control to tasks' user-space, while resource allocation for execution in kernel mode is according to the root group's (Partid=0) policy. With MPAM adding L2 cache support, and given small L2 capacity, frequently switching partition policies between kernel and user space would cause L2 thrashing and degrade performance. Moreover, to support MPAM isolation for kernel-space processes, kernel space should adopt the same partition policy as user space. To ensure the Partid state is updated promptly after the CPU exits from low power mode, add wmb() barrier in the CPU_PM_EXIT flow to guarantee that. Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- arch/arm64/include/asm/mpam.h | 1 + arch/arm64/kernel/cpufeature.c | 2 +- arch/arm64/kernel/mpam.c | 4 ++-- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm64/include/asm/mpam.h b/arch/arm64/include/asm/mpam.h index 8caac70e22ed..db4d559e8936 100644 --- a/arch/arm64/include/asm/mpam.h +++ b/arch/arm64/include/asm/mpam.h @@ -161,6 +161,7 @@ static inline void mpam_thread_switch(struct task_struct *tsk) return; /* Synchronising this write is left until the ERET to EL0 */ + write_sysreg_s(regval, SYS_MPAM1_EL1); write_sysreg_s(regval, SYS_MPAM0_EL1); WRITE_ONCE(per_cpu(arm64_mpam_current, cpu), regval); } diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 414b9d28ecd1..4cc8691dc7d8 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -2425,7 +2425,7 @@ cpu_enable_mpam(const struct arm64_cpu_capabilities *entry) * where latency sensitive tasks have to wait for a task that has * been throttled to release the lock. */ - write_sysreg_s(0, SYS_MPAM1_EL1); + write_sysreg_s(regval, SYS_MPAM1_EL1); write_sysreg_s(regval, SYS_MPAM0_EL1); } diff --git a/arch/arm64/kernel/mpam.c b/arch/arm64/kernel/mpam.c index 3f070cbab420..008c44c96a75 100644 --- a/arch/arm64/kernel/mpam.c +++ b/arch/arm64/kernel/mpam.c @@ -40,9 +40,9 @@ static int mpam_pm_notifier(struct notifier_block *self, * value has changed under our feet. */ regval = READ_ONCE(per_cpu(arm64_mpam_current, cpu)); - write_sysreg_s(0, SYS_MPAM1_EL1); + write_sysreg_s(regval, SYS_MPAM1_EL1); write_sysreg_s(regval, SYS_MPAM0_EL1); - + wmb(); return NOTIFY_OK; default: return NOTIFY_DONE; -- 2.25.1

2 1

[PATCH OLK-6.6] xsched: prevent linked list corruption in RT priority updates
by Liu Kai 15 Dec '25

15 Dec '25

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IDB5TR ----------------------------------------- Add scheduling class validation in xsched_rt_prio_set() to ensure only RT-scheduled tasks can perform RT priority modifications. Previously, CFS tasks could trigger xse_rt_del() operations via sys_xsched_setattr, corrupting CFS runqueue linked lists. The fix checks xse->class == &rt_xsched_class before any RT scheduler operations, maintaining proper separation between CFS and RT scheduling domains. Fixes: 832cfa264d7c ("xsched: add xsched_{set,get}attr syscall") Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- kernel/xsched/rt.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/kernel/xsched/rt.c b/kernel/xsched/rt.c index 498d5ac618a1..db7d97fed787 100644 --- a/kernel/xsched/rt.c +++ b/kernel/xsched/rt.c @@ -168,17 +168,20 @@ void xsched_rt_prio_set(pid_t tgid, unsigned int prio) mutex_lock(&xcu->xcu_lock); ctx = ctx_find_by_tgid_and_xcu(tgid, xcu); - if (ctx) { - xse = &ctx->xse; - xse->rt.prio = clamp_t(unsigned int, prio, XSE_PRIO_HIGH, XSE_PRIO_LOW); - if (xse->on_rq) { - xse_rt_del(xse); - xse_rt_add(xse, xcu); - } + if (!ctx || ctx->xse.class != &rt_xsched_class) { + mutex_unlock(&xcu->xcu_lock); + mutex_unlock(&xcu->ctx_list_lock); + continue; + } + + xse = &ctx->xse; + xse->rt.prio = clamp_t(unsigned int, prio, XSE_PRIO_HIGH, XSE_PRIO_LOW); + if (xse->on_rq) { + xse_rt_del(xse); + xse_rt_add(xse, xcu); } mutex_unlock(&xcu->xcu_lock); mutex_unlock(&xcu->ctx_list_lock); } } - -- 2.34.1

2 1

[openeuler:OLK-6.6 3542/3542] arch/x86/kernel/early-quirks.c:727:34: warning: no previous prototype for 'kh40000_get_direct_dma_ops'
by kernel test robot 15 Dec '25

15 Dec '25

Hi leoliu-oc, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-6.6 head: 81b22958142c03b02c766c79cd1554ebfa142be4 commit: 11557c1ae4529f133483879b7ee00b7d8c653be7 [3542/3542] x86/cpu/zhaoxin: Encapsulate access to kh40000_dma_direct_ops within function config: x86_64-randconfig-161-20251215 (https://download.01.org/0day-ci/archive/20251215/202512151614.LDi8I6GA-lkp@…) compiler: gcc-14 (Debian 14.2.0-19) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20251215/202512151614.LDi8I6GA-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202512151614.LDi8I6GA-lkp@intel.com/ All warnings (new ones prefixed by >>): arch/x86/kernel/early-quirks.c:722:6: warning: no previous prototype for 'is_zhaoxin_kh40000' [-Wmissing-prototypes] 722 | bool is_zhaoxin_kh40000(void) | ^~~~~~~~~~~~~~~~~~ >> arch/x86/kernel/early-quirks.c:727:34: warning: no previous prototype for 'kh40000_get_direct_dma_ops' [-Wmissing-prototypes] 727 | __weak const struct dma_map_ops *kh40000_get_direct_dma_ops(void) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ vim +/kh40000_get_direct_dma_ops +727 arch/x86/kernel/early-quirks.c 721 > 722 bool is_zhaoxin_kh40000(void) 723 { 724 return zhaoxin_kh40000; 725 } 726 > 727 __weak const struct dma_map_ops *kh40000_get_direct_dma_ops(void) 728 { 729 return dma_ops; 730 } 731 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0