- Kernel - mailweb.openeuler.org

[PATCH 01/10] genirq, sched/isolation: Isolate from handling managed interrupts
by Yang Yingliang 23 Dec '20

23 Dec '20

From: Ming Lei <ming.lei(a)redhat.com> mainline inclusion from mainline-v5.6-rc1 commit 11ea68f553e244851d15793a7fa33a97c46d8271 category: bugfix bugzilla: 45956 CVE: NA -------------------------------- The affinity of managed interrupts is completely handled in the kernel and cannot be changed via the /proc/irq/* interfaces from user space. As the kernel tries to spread out interrupts evenly accross CPUs on x86 to prevent vector exhaustion, it can happen that a managed interrupt whose affinity mask contains both isolated and housekeeping CPUs is routed to an isolated CPU. As a consequence IO submitted on a housekeeping CPU causes interrupts on the isolated CPU. Add a new sub-parameter 'managed_irq' for 'isolcpus' and the corresponding logic in the interrupt affinity selection code. The subparameter indicates to the interrupt affinity selection logic that it should try to avoid the above scenario. This isolation is best effort and only effective if the automatically assigned interrupt mask of a device queue contains isolated and housekeeping CPUs. If housekeeping CPUs are online then such interrupts are directed to the housekeeping CPU so that IO submitted on the housekeeping CPU cannot disturb the isolated CPU. If a queue's affinity mask contains only isolated CPUs then this parameter has no effect on the interrupt routing decision, though interrupts are only happening when tasks running on those isolated CPUs submit IO. IO submitted on housekeeping CPUs has no influence on those queues. If the affinity mask contains both housekeeping and isolated CPUs, but none of the contained housekeeping CPUs is online, then the interrupt is also routed to an isolated CPU. Interrupts are only delivered when one of the isolated CPUs in the affinity mask submits IO. If one of the contained housekeeping CPUs comes online, the CPU hotplug logic migrates the interrupt automatically back to the upcoming housekeeping CPU. Depending on the type of interrupt controller, this can require that at least one interrupt is delivered to the isolated CPU in order to complete the migration. [ tglx: Removed unused parameter, added and edited comments/documentation and rephrased the changelog so it contains more details. ] Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Link: https://lore.kernel.org/r/20200120091625.17912-1-ming.lei@redhat.com Signed-off-by: Liu Chao <liuchao173(a)huawei.com> Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../admin-guide/kernel-parameters.txt | 26 +++++++++++- include/linux/sched/isolation.h | 7 ++++ kernel/irq/cpuhotplug.c | 21 +++++++++- kernel/irq/manage.c | 41 ++++++++++++++++++- kernel/sched/isolation.c | 12 ++++++ 5 files changed, 102 insertions(+), 5 deletions(-) diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 60c06c7d243d..a0e84095a1a5 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -1911,9 +1911,31 @@ <cpu number> begins at 0 and the maximum value is "number of CPUs in system - 1". - The format of <cpu-list> is described above. - + managed_irq + + Isolate from being targeted by managed interrupts + which have an interrupt mask containing isolated + CPUs. The affinity of managed interrupts is + handled by the kernel and cannot be changed via + the /proc/irq/* interfaces. + + This isolation is best effort and only effective + if the automatically assigned interrupt mask of a + device queue contains isolated and housekeeping + CPUs. If housekeeping CPUs are online then such + interrupts are directed to the housekeeping CPU + so that IO submitted on the housekeeping CPU + cannot disturb the isolated CPU. + + If a queue's affinity mask contains only isolated + CPUs then this parameter has no effect on the + interrupt routing decision, though interrupts are + only delivered when tasks running on those + isolated CPUs submit IO. IO submitted on + housekeeping CPUs has no influence on those + queues. + The format of <cpu-list> is described above. iucv= [HW,NET] diff --git a/include/linux/sched/isolation.h b/include/linux/sched/isolation.h index 4a6582c27dea..461e1f6ab3eb 100644 --- a/include/linux/sched/isolation.h +++ b/include/linux/sched/isolation.h @@ -13,12 +13,14 @@ enum hk_flags { HK_FLAG_TICK = (1 << 4), HK_FLAG_DOMAIN = (1 << 5), HK_FLAG_WQ = (1 << 6), + HK_FLAG_MANAGED_IRQ = (1 << 7), }; #ifdef CONFIG_CPU_ISOLATION DECLARE_STATIC_KEY_FALSE(housekeeping_overriden); extern int housekeeping_any_cpu(enum hk_flags flags); extern const struct cpumask *housekeeping_cpumask(enum hk_flags flags); +extern bool housekeeping_enabled(enum hk_flags flags); extern void housekeeping_affine(struct task_struct *t, enum hk_flags flags); extern bool housekeeping_test_cpu(int cpu, enum hk_flags flags); extern void __init housekeeping_init(void); @@ -35,6 +37,11 @@ static inline const struct cpumask *housekeeping_cpumask(enum hk_flags flags) return cpu_possible_mask; } +static inline bool housekeeping_enabled(enum hk_flags flags) +{ + return false; +} + static inline void housekeeping_affine(struct task_struct *t, enum hk_flags flags) { } static inline void housekeeping_init(void) { } diff --git a/kernel/irq/cpuhotplug.c b/kernel/irq/cpuhotplug.c index 6c7ca2e983a5..02236b13b359 100644 --- a/kernel/irq/cpuhotplug.c +++ b/kernel/irq/cpuhotplug.c @@ -12,6 +12,7 @@ #include <linux/interrupt.h> #include <linux/ratelimit.h> #include <linux/irq.h> +#include <linux/sched/isolation.h> #include "internals.h" @@ -171,6 +172,20 @@ void irq_migrate_all_off_this_cpu(void) } } +static bool hk_should_isolate(struct irq_data *data, unsigned int cpu) +{ + const struct cpumask *hk_mask; + + if (!housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) + return false; + + hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ); + if (cpumask_subset(irq_data_get_effective_affinity_mask(data), hk_mask)) + return false; + + return cpumask_test_cpu(cpu, hk_mask); +} + static void irq_restore_affinity_of_irq(struct irq_desc *desc, unsigned int cpu) { struct irq_data *data = irq_desc_get_irq_data(desc); @@ -188,9 +203,11 @@ static void irq_restore_affinity_of_irq(struct irq_desc *desc, unsigned int cpu) /* * If the interrupt can only be directed to a single target * CPU then it is already assigned to a CPU in the affinity - * mask. No point in trying to move it around. + * mask. No point in trying to move it around unless the + * isolation mechanism requests to move it to an upcoming + * housekeeping CPU. */ - if (!irqd_is_single_target(data)) + if (!irqd_is_single_target(data) || hk_should_isolate(data, cpu)) irq_set_affinity_locked(data, affinity, false); } diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index a8c66acee82a..34eda1e772fa 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -18,6 +18,7 @@ #include <linux/sched.h> #include <linux/sched/rt.h> #include <linux/sched/task.h> +#include <linux/sched/isolation.h> #include <uapi/linux/sched/types.h> #include <linux/task_work.h> @@ -227,7 +228,45 @@ int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask, if (!chip || !chip->irq_set_affinity) return -EINVAL; - ret = chip->irq_set_affinity(data, mask, force); + /* + * If this is a managed interrupt and housekeeping is enabled on + * it check whether the requested affinity mask intersects with + * a housekeeping CPU. If so, then remove the isolated CPUs from + * the mask and just keep the housekeeping CPU(s). This prevents + * the affinity setter from routing the interrupt to an isolated + * CPU to avoid that I/O submitted from a housekeeping CPU causes + * interrupts on an isolated one. + * + * If the masks do not intersect or include online CPU(s) then + * keep the requested mask. The isolated target CPUs are only + * receiving interrupts when the I/O operation was submitted + * directly from them. + * + * If all housekeeping CPUs in the affinity mask are offline, the + * interrupt will be migrated by the CPU hotplug code once a + * housekeeping CPU which belongs to the affinity mask comes + * online. + */ + if (irqd_affinity_is_managed(data) && + housekeeping_enabled(HK_FLAG_MANAGED_IRQ)) { + const struct cpumask *hk_mask, *prog_mask; + + static DEFINE_RAW_SPINLOCK(tmp_mask_lock); + static struct cpumask tmp_mask; + + hk_mask = housekeeping_cpumask(HK_FLAG_MANAGED_IRQ); + + raw_spin_lock(&tmp_mask_lock); + cpumask_and(&tmp_mask, mask, hk_mask); + if (!cpumask_intersects(&tmp_mask, cpu_online_mask)) + prog_mask = mask; + else + prog_mask = &tmp_mask; + ret = chip->irq_set_affinity(data, prog_mask, force); + raw_spin_unlock(&tmp_mask_lock); + } else { + ret = chip->irq_set_affinity(data, mask, force); + } switch (ret) { case IRQ_SET_MASK_OK: case IRQ_SET_MASK_OK_DONE: diff --git a/kernel/sched/isolation.c b/kernel/sched/isolation.c index e6802181900f..6e85049d68cf 100644 --- a/kernel/sched/isolation.c +++ b/kernel/sched/isolation.c @@ -13,6 +13,12 @@ EXPORT_SYMBOL_GPL(housekeeping_overriden); static cpumask_var_t housekeeping_mask; static unsigned int housekeeping_flags; +bool housekeeping_enabled(enum hk_flags flags) +{ + return !!(housekeeping_flags & flags); +} +EXPORT_SYMBOL_GPL(housekeeping_enabled); + int housekeeping_any_cpu(enum hk_flags flags) { if (static_branch_unlikely(&housekeeping_overriden)) @@ -140,6 +146,12 @@ static int __init housekeeping_isolcpus_setup(char *str) continue; } + if (!strncmp(str, "managed_irq,", 12)) { + str += 12; + flags |= HK_FLAG_MANAGED_IRQ; + continue; + } + pr_warn("isolcpus: Error, unknown flag\n"); return 0; } -- 2.25.1

1 2

[PATCH v3 OLK-5.10 00/26] KVM RISC-V Support
by MingWang Li 23 Dec '20

23 Dec '20

From: Mingwang Li <limingwang(a)huawei.com> euleros inclusion category: feature feature: initial KVM RISC-V support bugzilla: 46845 CVE: NA This series adds initial KVM RISC-V support. Currently, we are able to boot Linux on RV64/RV32 Guest with multiple VCPUs. This series can be found in riscv_kvm_v15 branch at: https//github.com/avpatel/linux.git Changes since v2 - fix build error Changes since v1 - follow guileline for submiting patches to openEuler - add the testing result in this issue Reference: https://gitee.com/openeuler/kernel/issues/I26X9V Alistair Francis (1): Revert "riscv: Use latest system call ABI" Anup Patel (19): RISC-V: Add fragmented config for debug options RISC-V: Enable CPU Hotplug in defconfigs RISC-V: Add Microchip PolarFire kconfig option RISC-V: Initial DTS for Microchip ICICLE board RISC-V: Enable drivers for Microchip PolarFire ICICLE board RISC-V: Add hypervisor extension related CSR defines RISC-V: Add initial skeletal KVM support RISC-V: KVM: Implement VCPU create, init and destroy functions RISC-V: KVM: Implement VCPU interrupts and requests handling RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls RISC-V: KVM: Implement VCPU world-switch RISC-V: KVM: Handle MMIO exits for VCPU RISC-V: KVM: Handle WFI exits for VCPU RISC-V: KVM: Implement VMID allocator RISC-V: KVM: Implement stage2 page table programming RISC-V: KVM: Implement MMU notifiers RISC-V: KVM: Document RISC-V specific parts of KVM API RISC-V: KVM: Add MAINTAINERS entry RISC-V: Enable KVM for RV64 and RV32 Atish Patra (4): RISC-V: KVM: Add timer functionality RISC-V: KVM: FP lazy save/restore RISC-V: KVM: Implement ONE REG interface for FP registers RISC-V: KVM: Add SBI v0.1 support Mingwang Li (1): RISCV: KVM: fix bug in migration m34782 (1): Microchip Polarfire SoC Clock Driver Documentation/virt/kvm/api.rst | 193 +++- MAINTAINERS | 11 + arch/riscv/Kconfig | 2 + arch/riscv/Kconfig.socs | 7 + arch/riscv/Makefile | 2 + arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/microchip/Makefile | 2 + .../boot/dts/microchip/icicle-kit-es.dts | 307 +++++ arch/riscv/configs/defconfig | 30 +- arch/riscv/configs/extra_debug.config | 21 + arch/riscv/configs/rv32_defconfig | 26 +- arch/riscv/include/asm/csr.h | 89 ++ arch/riscv/include/asm/kvm_host.h | 278 +++++ arch/riscv/include/asm/kvm_types.h | 7 + arch/riscv/include/asm/kvm_vcpu_timer.h | 44 + arch/riscv/include/asm/pgtable-bits.h | 1 + arch/riscv/include/uapi/asm/kvm.h | 128 +++ arch/riscv/include/uapi/asm/unistd.h | 5 +- arch/riscv/kernel/asm-offsets.c | 156 +++ arch/riscv/kvm/Kconfig | 36 + arch/riscv/kvm/Makefile | 15 + arch/riscv/kvm/main.c | 118 ++ arch/riscv/kvm/mmu.c | 860 ++++++++++++++ arch/riscv/kvm/tlb.S | 74 ++ arch/riscv/kvm/vcpu.c | 1012 +++++++++++++++++ arch/riscv/kvm/vcpu_exit.c | 701 ++++++++++++ arch/riscv/kvm/vcpu_sbi.c | 173 +++ arch/riscv/kvm/vcpu_switch.S | 400 +++++++ arch/riscv/kvm/vcpu_timer.c | 225 ++++ arch/riscv/kvm/vm.c | 81 ++ arch/riscv/kvm/vmid.c | 120 ++ drivers/clk/Kconfig | 5 + drivers/clk/Makefile | 1 + drivers/clk/microchip/Makefile | 2 + drivers/clk/microchip/clk-pfsoc.c | 508 +++++++++ drivers/clocksource/timer-riscv.c | 8 + include/clocksource/timer-riscv.h | 16 + include/uapi/linux/kvm.h | 8 + 38 files changed, 5619 insertions(+), 54 deletions(-) create mode 100644 arch/riscv/boot/dts/microchip/Makefile create mode 100644 arch/riscv/boot/dts/microchip/icicle-kit-es.dts create mode 100644 arch/riscv/configs/extra_debug.config create mode 100644 arch/riscv/include/asm/kvm_host.h create mode 100644 arch/riscv/include/asm/kvm_types.h create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h create mode 100644 arch/riscv/include/uapi/asm/kvm.h create mode 100644 arch/riscv/kvm/Kconfig create mode 100644 arch/riscv/kvm/Makefile create mode 100644 arch/riscv/kvm/main.c create mode 100644 arch/riscv/kvm/mmu.c create mode 100644 arch/riscv/kvm/tlb.S create mode 100644 arch/riscv/kvm/vcpu.c create mode 100644 arch/riscv/kvm/vcpu_exit.c create mode 100644 arch/riscv/kvm/vcpu_sbi.c create mode 100644 arch/riscv/kvm/vcpu_switch.S create mode 100644 arch/riscv/kvm/vcpu_timer.c create mode 100644 arch/riscv/kvm/vm.c create mode 100644 arch/riscv/kvm/vmid.c create mode 100644 drivers/clk/microchip/clk-pfsoc.c create mode 100644 include/clocksource/timer-riscv.h -- 2.19.1

3 28

[PATCH OLK-5.10 1/1] mm, page_alloc: avoid page_to_pfn() in move_freepages()
by Chen Jun 22 Dec '20

22 Dec '20

From: Kefeng Wang <wangkefeng.wang(a)huawei.com> hulk inclusion category: bugfix bugzilla: 46856 CVE: NA --------------------------- The start_pfn and end_pfn are already available in move_freepages_block(), there is no need to go back and forth between page and pfn in move_freepages and move_freepages_block, and pfn_valid_within() should validate pfn first before touching the page. Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> --- mm/page_alloc.c | 28 +++++++++++++--------------- 1 file changed, 13 insertions(+), 15 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index eaa227a479e4..636afce90efa 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2361,19 +2361,21 @@ static inline struct page *__rmqueue_cma_fallback(struct zone *zone, * boundary. If alignment is required, use move_freepages_block() */ static int move_freepages(struct zone *zone, - struct page *start_page, struct page *end_page, + unsigned long start_pfn, unsigned long end_pfn, int migratetype, int *num_movable) { struct page *page; + unsigned long pfn; unsigned int order; int pages_moved = 0; - for (page = start_page; page <= end_page;) { - if (!pfn_valid_within(page_to_pfn(page))) { - page++; + for (pfn = start_pfn; pfn <= end_pfn;) { + if (!pfn_valid_within(pfn)) { + pfn++; continue; } + page = pfn_to_page(pfn); if (!PageBuddy(page)) { /* * We assume that pages that could be isolated for @@ -2383,8 +2385,7 @@ static int move_freepages(struct zone *zone, if (num_movable && (PageLRU(page) || __PageMovable(page))) (*num_movable)++; - - page++; + pfn++; continue; } @@ -2394,7 +2395,7 @@ static int move_freepages(struct zone *zone, order = buddy_order(page); move_to_free_list(page, zone, order, migratetype); - page += 1 << order; + pfn += 1 << order; pages_moved += 1 << order; } @@ -2404,25 +2405,22 @@ static int move_freepages(struct zone *zone, int move_freepages_block(struct zone *zone, struct page *page, int migratetype, int *num_movable) { - unsigned long start_pfn, end_pfn; - struct page *start_page, *end_page; + unsigned long start_pfn, end_pfn, pfn; if (num_movable) *num_movable = 0; - start_pfn = page_to_pfn(page); - start_pfn = start_pfn & ~(pageblock_nr_pages-1); - start_page = pfn_to_page(start_pfn); - end_page = start_page + pageblock_nr_pages - 1; + pfn = page_to_pfn(page); + start_pfn = pfn & ~(pageblock_nr_pages - 1); end_pfn = start_pfn + pageblock_nr_pages - 1; /* Do not cross zone boundaries */ if (!zone_spans_pfn(zone, start_pfn)) - start_page = page; + start_pfn = pfn; if (!zone_spans_pfn(zone, end_pfn)) return 0; - return move_freepages(zone, start_page, end_page, migratetype, + return move_freepages(zone, start_pfn, end_pfn, migratetype, num_movable); } -- 2.25.0

1 0

[PATCH OLK-5.10 00/24] Support ILP32 for ARM64
by Chen Jun 22 Dec '20

22 Dec '20

*** BLURB HERE *** Andrew Pinski (3): arm64: rename COMPAT to AARCH32_EL0 arm64: uapi: set __BITS_PER_LONG correctly for ILP32 and LP64 arm64:ilp32: add ARM64_ILP32 to Kconfig Dave Martin (1): arm64: signal: Make parse_user_sigframe() independent of rt_sigframe layout James Morse (1): ptrace: Add compat PTRACE_{G,S}ETSIGMASK handlers Philipp Tomsich (1): arm64:ilp32: add vdso-ilp32 and use for signal return Xiongfeng Wang (4): arm64: rename functions that reference compat term arm64: secomp: fix the secure computing mode 1 syscall check for ilp32 ilp32: avoid clearing upper 32 bits of syscall return value for ilp32 ilp32: skip ARM erratum 1418040 for ilp32 application Yury Norov (14): thread: move thread bits accessors to separated file arm64: ilp32: add documentation on the ILP32 ABI for ARM64 arm64: introduce is_a32_compat_{task,thread} for AArch32 compat arm64: ilp32: add is_ilp32_compat_{task,thread} and TIF_32BIT_AARCH64 arm64: introduce AUDIT_ARCH_AARCH64ILP32 for ilp32 arm64: introduce binfmt_elf32.c arm64: change compat_elf_hwcap and compat_elf_hwcap2 prefix to a32 arm64: ilp32: introduce binfmt_ilp32.c arm64: ilp32: share aarch32 syscall handlers arm64: ilp32: introduce syscall table for ILP32 arm64: signal: share lp64 signal structures and routines to ilp32 arm64: signal32: move ilp32 and aarch32 common code to separated file arm64: ilp32: introduce ilp32-specific sigframe and ucontext arm64: ptrace: handle ptrace_request differently for aarch32 and ilp32 Documentation/arm64/ilp32.txt | 52 +++ arch/arm64/Kconfig | 20 +- arch/arm64/Makefile | 3 + arch/arm64/include/asm/arch_timer.h | 4 +- arch/arm64/include/asm/compat.h | 19 +- arch/arm64/include/asm/elf.h | 37 +- arch/arm64/include/asm/fpsimd.h | 2 +- arch/arm64/include/asm/ftrace.h | 2 +- arch/arm64/include/asm/hwcap.h | 8 +- arch/arm64/include/asm/is_compat.h | 78 ++++ arch/arm64/include/asm/processor.h | 15 +- arch/arm64/include/asm/ptrace.h | 10 +- arch/arm64/include/asm/seccomp.h | 32 +- arch/arm64/include/asm/signal32.h | 31 +- arch/arm64/include/asm/signal32_common.h | 13 + arch/arm64/include/asm/signal_common.h | 303 +++++++++++++++ arch/arm64/include/asm/signal_ilp32.h | 23 ++ arch/arm64/include/asm/syscall.h | 17 +- arch/arm64/include/asm/thread_info.h | 4 +- arch/arm64/include/asm/unistd.h | 5 + arch/arm64/include/asm/vdso.h | 6 + arch/arm64/include/uapi/asm/bitsperlong.h | 9 +- arch/arm64/include/uapi/asm/unistd.h | 15 +- arch/arm64/kernel/Makefile | 8 +- arch/arm64/kernel/armv8_deprecated.c | 6 +- arch/arm64/kernel/asm-offsets.c | 13 +- arch/arm64/kernel/binfmt_elf32.c | 34 ++ arch/arm64/kernel/binfmt_ilp32.c | 88 +++++ arch/arm64/kernel/cpufeature.c | 30 +- arch/arm64/kernel/cpuinfo.c | 18 +- arch/arm64/kernel/debug-monitors.c | 4 +- arch/arm64/kernel/entry-common.c | 4 +- arch/arm64/kernel/entry.S | 6 +- arch/arm64/kernel/head.S | 2 +- arch/arm64/kernel/hw_breakpoint.c | 8 +- arch/arm64/kernel/perf_callchain.c | 28 +- arch/arm64/kernel/perf_regs.c | 4 +- arch/arm64/kernel/process.c | 15 +- arch/arm64/kernel/proton-pack.c | 2 +- arch/arm64/kernel/ptrace.c | 38 +- arch/arm64/kernel/signal.c | 348 ++++-------------- arch/arm64/kernel/signal32.c | 97 ++--- arch/arm64/kernel/signal32_common.c | 37 ++ arch/arm64/kernel/signal_ilp32.c | 67 ++++ arch/arm64/kernel/sys32.c | 104 +----- arch/arm64/kernel/sys32_common.c | 106 ++++++ arch/arm64/kernel/sys_compat.c | 12 +- arch/arm64/kernel/sys_ilp32.c | 82 +++++ arch/arm64/kernel/syscall.c | 39 +- arch/arm64/kernel/traps.c | 5 +- arch/arm64/kernel/vdso-ilp32/.gitignore | 2 + arch/arm64/kernel/vdso-ilp32/Makefile | 108 ++++++ arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S | 22 ++ arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S | 88 +++++ arch/arm64/kernel/vdso.c | 50 ++- include/linux/sched.h | 1 + include/linux/thread_bits.h | 87 +++++ include/linux/thread_info.h | 75 +--- include/uapi/linux/audit.h | 1 + kernel/ptrace.c | 52 ++- 60 files changed, 1673 insertions(+), 726 deletions(-) create mode 100644 Documentation/arm64/ilp32.txt create mode 100644 arch/arm64/include/asm/is_compat.h create mode 100644 arch/arm64/include/asm/signal32_common.h create mode 100644 arch/arm64/include/asm/signal_common.h create mode 100644 arch/arm64/include/asm/signal_ilp32.h create mode 100644 arch/arm64/kernel/binfmt_elf32.c create mode 100644 arch/arm64/kernel/binfmt_ilp32.c create mode 100644 arch/arm64/kernel/signal32_common.c create mode 100644 arch/arm64/kernel/signal_ilp32.c create mode 100644 arch/arm64/kernel/sys32_common.c create mode 100644 arch/arm64/kernel/sys_ilp32.c create mode 100644 arch/arm64/kernel/vdso-ilp32/.gitignore create mode 100644 arch/arm64/kernel/vdso-ilp32/Makefile create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S create mode 100644 include/linux/thread_bits.h -- 2.25.0

2 25

[PATCH kernel-4.19 01/25] ascend: share_pool: make the function share_k2u_to_spg work
by Yang Yingliang 22 Dec '20

22 Dec '20

From: Ding Tianhong <dingtianhong(a)huawei.com> ascend inclusion category: feature bugzilla: NA CVE: NA ------------------------------------------------- The share_k2u_to_spg was designed to translate the kernel virtual address to user level address and share to the whole group, but tht function use the uncorrect file to mmap the memory region, it was not really work for whole group, and will consume more memory, fix this problem to use the correct hugepage file and make share to the whole group for each task. Signed-off-by: Ding Tianhong <dingtianhong(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/share_pool.c | 117 +++++++++++++++++++++++++++++++++++------------- 1 file changed, 87 insertions(+), 30 deletions(-) diff --git a/mm/share_pool.c b/mm/share_pool.c index f8dfbe80968b..a83254200e33 100644 --- a/mm/share_pool.c +++ b/mm/share_pool.c @@ -267,7 +267,10 @@ static int spa_dec_usage(enum spa_type type, unsigned long size, bool is_dvpp) } static unsigned long sp_mmap(struct mm_struct *mm, struct file *file, - struct sp_area *spa, unsigned long *populate); + struct sp_area *spa, unsigned long *populate); +static void sp_munmap(struct mm_struct *mm, unsigned long addr, unsigned long size); +static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, + struct mm_struct *mm); static void free_sp_group_id(unsigned int spg_id) { @@ -596,6 +599,15 @@ int sp_group_add_task(int pid, int spg_id) atomic_inc(&spa->use_count); spin_unlock(&sp_area_lock); + if (spa->type == SPA_TYPE_K2SPG && spa->kva) { + addr = sp_remap_kva_to_vma(spa->kva, spa, mm); + if (IS_ERR_VALUE(addr)) + pr_warn("share pool: task add group remap k2u failed, ret %ld\n", addr); + + spin_lock(&sp_area_lock); + continue; + } + down_write(&mm->mmap_sem); addr = sp_mmap(mm, file, spa, &populate); if (IS_ERR_VALUE(addr)) { @@ -611,9 +623,11 @@ int sp_group_add_task(int pid, int spg_id) if (populate) { ret = do_mm_populate(mm, spa->va_start, populate, 0); if (ret) { - if (printk_ratelimit()) + if (printk_ratelimit()) { pr_warn("share pool: task add group failed when mm populate " - "failed (potential no enough memory): %d\n", ret); + "failed (potential no enough memory): %d " + "spa flag is %d\n", ret, spa->type); + } sp_munmap_task_areas(mm, spa->link.next); spin_lock(&sp_area_lock); break; @@ -1480,12 +1494,16 @@ static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, int hsize_log = MAP_HUGE_2MB >> MAP_HUGE_SHIFT; unsigned long addr, buf, offset; - if (spa->is_hugepage) { - file = hugetlb_file_setup(HUGETLB_ANON_FILE, spa_size(spa), VM_NORESERVE, - &user, HUGETLB_ANONHUGE_INODE, hsize_log); - if (IS_ERR(file)) { - pr_err("share pool: file setup for k2u hugepage failed %ld\n", PTR_ERR(file)); - return PTR_ERR(file); + if (spg_valid(spa->spg)) { + file = spa_file(spa); + } else { + if (spa->is_hugepage) { + file = hugetlb_file_setup(HUGETLB_ANON_FILE, spa_size(spa), VM_NORESERVE, + &user, HUGETLB_ANONHUGE_INODE, hsize_log); + if (IS_ERR(file)) { + pr_err("share pool: file setup for k2u hugepage failed %ld\n", PTR_ERR(file)); + return PTR_ERR(file); + } } } @@ -1510,7 +1528,8 @@ static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, ret = remap_vmalloc_hugepage_range(vma, (void *)kva, 0); if (ret) { do_munmap(mm, ret_addr, spa_size(spa), NULL); - pr_err("share pool: remap vmalloc hugepage failed, ret %d\n", ret); + pr_err("share pool: remap vmalloc hugepage failed, " + "ret %d, kva is %lx\n", ret, kva); ret_addr = ret; goto put_mm; } @@ -1538,7 +1557,7 @@ static unsigned long sp_remap_kva_to_vma(unsigned long kva, struct sp_area *spa, up_write(&mm->mmap_sem); mmput(mm); put_file: - if (file) + if (!spa->spg && file) fput(file); return ret_addr; @@ -1615,6 +1634,35 @@ static void *sp_make_share_kva_to_spg(unsigned long kva, struct sp_area *spa, return p; } +static bool vmalloc_area_set_flag(struct sp_area *spa, unsigned long kva, unsigned long flags) +{ + struct vm_struct *area; + + area = find_vm_area((void *)kva); + if (area) { + area->flags |= flags; + spa->kva = kva; + return true; + } + + return false; +} + +static bool vmalloc_area_clr_flag(struct sp_area *spa, unsigned long kva, unsigned long flags) +{ + struct vm_struct *area; + + spa->kva = 0; + + area = find_vm_area((void *)kva); + if (area) { + area->flags &= ~flags; + return true; + } + + return false; +} + /** * Share kernel memory to a specified process or sp_group * @kva: the VA of shared kernel memory @@ -1638,7 +1686,6 @@ void *sp_make_share_k2u(unsigned long kva, unsigned long size, unsigned long size_aligned; unsigned int page_size = PAGE_SIZE; int ret; - struct vm_struct *area; if (sp_flags & ~SP_DVPP) { if (printk_ratelimit()) @@ -1679,8 +1726,13 @@ void *sp_make_share_k2u(unsigned long kva, unsigned long size, PTR_ERR(spa)); return spa; } + + if (!vmalloc_area_set_flag(spa, kva_aligned, VM_SHAREPOOL)) { + pr_err("%s: the kva %ld is not valid\n", __func__, kva_aligned); + goto out; + } + uva = sp_make_share_kva_to_task(kva_aligned, spa, pid); - mutex_unlock(&sp_mutex); } else if (spg_valid(spg)) { /* k2u to group */ if (spg_id != SPG_ID_DEFAULT && spg_id != spg->id) { @@ -1699,26 +1751,31 @@ void *sp_make_share_k2u(unsigned long kva, unsigned long size, return spa; } + if (!vmalloc_area_set_flag(spa, kva_aligned, VM_SHAREPOOL)) { + pr_err("%s: the kva %ld is not valid\n", __func__, kva_aligned); + goto out; + } + uva = sp_make_share_kva_to_spg(kva_aligned, spa, spg); - mutex_unlock(&sp_mutex); } else { mutex_unlock(&sp_mutex); pr_err("share pool: failed to make k2u\n"); return NULL; } - if (!IS_ERR(uva)) + if (!IS_ERR(uva)) { uva = uva + (kva - kva_aligned); + } else { + /* associate vma and spa */ + if (!vmalloc_area_clr_flag(spa, kva_aligned, VM_SHAREPOOL)) + pr_warn("share pool: %s: the kva %ld is not valid \n", + __func__, kva_aligned); + } +out: __sp_area_drop(spa); + mutex_unlock(&sp_mutex); - if (!IS_ERR(uva)) { - /* associate vma and spa */ - area = find_vm_area((void *)kva); - if (area) - area->flags |= VM_SHAREPOOL; - spa->kva = kva; - } sp_dump_stack(); return uva; @@ -1990,7 +2047,6 @@ static int sp_unshare_uva(unsigned long uva, unsigned long size, int pid, int sp unsigned long uva_aligned; unsigned long size_aligned; unsigned int page_size; - struct vm_struct *area; mutex_lock(&sp_mutex); /* @@ -2061,7 +2117,7 @@ static int sp_unshare_uva(unsigned long uva, unsigned long size, int pid, int sp if (printk_ratelimit()) pr_info("share pool: no need to unshare uva(to task), " "target process mm is exiting\n"); - goto out_drop_area; + goto out_clr_flag; } if (spa->mm != mm) { @@ -2095,7 +2151,7 @@ static int sp_unshare_uva(unsigned long uva, unsigned long size, int pid, int sp if (printk_ratelimit()) pr_info("share pool: no need to unshare uva(to group), " "spa doesn't belong to a sp group or group is dead\n"); - goto out_drop_area; + goto out_clr_flag; } /* alway allow kthread and dvpp channel destroy procedure */ @@ -2112,11 +2168,12 @@ static int sp_unshare_uva(unsigned long uva, unsigned long size, int pid, int sp sp_dump_stack(); -out_drop_area: +out_clr_flag: /* deassociate vma and spa */ - area = find_vm_area((void *)spa->kva); - if (area) - area->flags &= ~VM_SHAREPOOL; + if (!vmalloc_area_clr_flag(spa, spa->kva, VM_SHAREPOOL)) + pr_warn("share pool: %s: the spa->kva %ld is not valid\n", __func__, spa->kva); + +out_drop_area: __sp_area_drop(spa); out_unlock: mutex_unlock(&sp_mutex); @@ -2162,7 +2219,7 @@ static int sp_unshare_kva(unsigned long kva, unsigned long size) if (page) put_page(page); else - pr_err("share pool: vmalloc %pK to page/hugepage failed\n", + pr_warn("share pool: vmalloc %pK to page/hugepage failed\n", (void *)addr); } -- 2.25.1

1 24

[PATCH v2 OLK-5.10 00/26] KVM RISC-V Support
by MingWang Li 22 Dec '20

22 Dec '20

From: Mingwang Li <limingwang(a)huawei.com> euleros inclusion category: feature feature: initial KVM RISC-V support bugzilla: 46845 CVE: NA This series adds initial KVM RISC-V support. Currently, we are able to boot Linux on RV64/RV32 Guest with multiple VCPUs. This series can be found in riscv_kvm_v15 branch at: https//github.com/avpatel/linux.git Changes since v1 - follow guileline for submiting patches to openEuler - add the testing result in this issue Reference: https://gitee.com/openeuler/kernel/issues/I26X9V Alistair Francis (1): Revert "riscv: Use latest system call ABI" Anup Patel (19): RISC-V: Add fragmented config for debug options RISC-V: Enable CPU Hotplug in defconfigs RISC-V: Add Microchip PolarFire kconfig option RISC-V: Initial DTS for Microchip ICICLE board RISC-V: Enable drivers for Microchip PolarFire ICICLE board RISC-V: Add hypervisor extension related CSR defines RISC-V: Add initial skeletal KVM support RISC-V: KVM: Implement VCPU create, init and destroy functions RISC-V: KVM: Implement VCPU interrupts and requests handling RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls RISC-V: KVM: Implement VCPU world-switch RISC-V: KVM: Handle MMIO exits for VCPU RISC-V: KVM: Handle WFI exits for VCPU RISC-V: KVM: Implement VMID allocator RISC-V: KVM: Implement stage2 page table programming RISC-V: KVM: Implement MMU notifiers RISC-V: KVM: Document RISC-V specific parts of KVM API RISC-V: KVM: Add MAINTAINERS entry RISC-V: Enable KVM for RV64 and RV32 Atish Patra (4): RISC-V: KVM: Add timer functionality RISC-V: KVM: FP lazy save/restore RISC-V: KVM: Implement ONE REG interface for FP registers RISC-V: KVM: Add SBI v0.1 support Mingwang Li (1): RISCV: KVM: fix bug in migration m34782 (1): Microchip Polarfire SoC Clock Driver Documentation/virt/kvm/api.rst | 193 +++- MAINTAINERS | 11 + arch/riscv/Kconfig | 2 + arch/riscv/Kconfig.socs | 7 + arch/riscv/Makefile | 2 + arch/riscv/boot/dts/Makefile | 1 + arch/riscv/boot/dts/microchip/Makefile | 2 + .../boot/dts/microchip/icicle-kit-es.dts | 307 +++++ arch/riscv/configs/defconfig | 30 +- arch/riscv/configs/extra_debug.config | 21 + arch/riscv/configs/rv32_defconfig | 26 +- arch/riscv/include/asm/csr.h | 89 ++ arch/riscv/include/asm/kvm_host.h | 278 +++++ arch/riscv/include/asm/kvm_types.h | 7 + arch/riscv/include/asm/kvm_vcpu_timer.h | 44 + arch/riscv/include/asm/pgtable-bits.h | 1 + arch/riscv/include/uapi/asm/kvm.h | 128 +++ arch/riscv/include/uapi/asm/unistd.h | 5 +- arch/riscv/kernel/asm-offsets.c | 156 +++ arch/riscv/kvm/Kconfig | 36 + arch/riscv/kvm/Makefile | 15 + arch/riscv/kvm/main.c | 118 ++ arch/riscv/kvm/mmu.c | 860 ++++++++++++++ arch/riscv/kvm/tlb.S | 74 ++ arch/riscv/kvm/vcpu.c | 1012 +++++++++++++++++ arch/riscv/kvm/vcpu_exit.c | 701 ++++++++++++ arch/riscv/kvm/vcpu_sbi.c | 173 +++ arch/riscv/kvm/vcpu_switch.S | 400 +++++++ arch/riscv/kvm/vcpu_timer.c | 225 ++++ arch/riscv/kvm/vm.c | 81 ++ arch/riscv/kvm/vmid.c | 120 ++ drivers/clk/Kconfig | 5 + drivers/clk/Makefile | 1 + drivers/clk/microchip/Makefile | 2 + drivers/clk/microchip/clk-pfsoc.c | 508 +++++++++ drivers/clocksource/timer-riscv.c | 8 + include/clocksource/timer-riscv.h | 16 + include/uapi/linux/kvm.h | 8 + 38 files changed, 5619 insertions(+), 54 deletions(-) create mode 100644 arch/riscv/boot/dts/microchip/Makefile create mode 100644 arch/riscv/boot/dts/microchip/icicle-kit-es.dts create mode 100644 arch/riscv/configs/extra_debug.config create mode 100644 arch/riscv/include/asm/kvm_host.h create mode 100644 arch/riscv/include/asm/kvm_types.h create mode 100644 arch/riscv/include/asm/kvm_vcpu_timer.h create mode 100644 arch/riscv/include/uapi/asm/kvm.h create mode 100644 arch/riscv/kvm/Kconfig create mode 100644 arch/riscv/kvm/Makefile create mode 100644 arch/riscv/kvm/main.c create mode 100644 arch/riscv/kvm/mmu.c create mode 100644 arch/riscv/kvm/tlb.S create mode 100644 arch/riscv/kvm/vcpu.c create mode 100644 arch/riscv/kvm/vcpu_exit.c create mode 100644 arch/riscv/kvm/vcpu_sbi.c create mode 100644 arch/riscv/kvm/vcpu_switch.S create mode 100644 arch/riscv/kvm/vcpu_timer.c create mode 100644 arch/riscv/kvm/vm.c create mode 100644 arch/riscv/kvm/vmid.c create mode 100644 drivers/clk/microchip/clk-pfsoc.c create mode 100644 include/clocksource/timer-riscv.h -- 2.19.1

4 30

[PATCH OLK-5.10 v3 0/4] kvm: debugfs: support vcpu_stat debugfs
by Jiajun Chen 22 Dec '20

22 Dec '20

From: chenjiajun <chenjiajun8(a)huawei.com> virt inclusion category: feature bugzilla: 46853 CVE: NA Export kvm vcpu info in debugfs entry /sys/kernel/debug/kvm/vcpu_stat, this entry contains kvm exits and cputime items now. And then, we can get all kvm vcpu info through this debugfs instead of one entry per kvm exits items, which will greatly facilitates the collection of performance status. Currently, only support x86 and aarch64. -- ChangeList: v3: modify kzfree in patches v2: modify architecture-dependent st_max to avoid compile err in other arches v1: kvm: debugfs: support vcpu_stat debugfs chenjiajun (4): kvm: debugfs: Export vcpu stat via debugfs kvm: debugfs: export remaining aarch64 kvm exit reasons to debugfs kvm: debugfs: aarch64 export cpu time related items to debugfs kvm: debugfs: Export x86 kvm exits to vcpu_stat arch/arm64/include/asm/kvm_host.h | 21 ++++ arch/arm64/kvm/arm.c | 23 +++++ arch/arm64/kvm/guest.c | 33 +++++++ arch/arm64/kvm/handle_exit.c | 8 ++ arch/arm64/kvm/hyp/include/hyp/switch.h | 1 + arch/arm64/kvm/mmu.c | 1 + arch/arm64/kvm/sys_regs.c | 11 +++ arch/x86/include/asm/kvm_host.h | 13 +++ arch/x86/kvm/vmx/vmx.c | 10 ++ arch/x86/kvm/x86.c | 70 +++++++++++++ include/linux/kvm_host.h | 19 ++++ virt/kvm/kvm_main.c | 125 ++++++++++++++++++++++++ 12 files changed, 335 insertions(+) -- 2.29.GIT

1 4

[PATCH OLK-5.10 0/4] kvm: debugfs: support vcpu_stat debugfs
by Jiajun Chen 22 Dec '20

22 Dec '20

From: chenjiajun <chenjiajun8(a)huawei.com> virt inclusion category: feature bugzilla: 46853 CVE: NA Export kvm vcpu info in debugfs entry /sys/kernel/debug/kvm/vcpu_stat, this entry contains kvm exits and cputime items now. And then, we can get all kvm vcpu info through this debugfs instead of one entry per kvm exits items, which will greatly facilitates the collection of performance status. Currently, only support x86 and aarch64. -- ChangeList: v3: modify kzfree in patches v2: modify architecture-dependent st_max to avoid compile err in other arches v1: kvm: debugfs: support vcpu_stat debugfs chenjiajun (4): kvm: debugfs: Export vcpu stat via debugfs kvm: debugfs: export remaining aarch64 kvm exit reasons to debugfs kvm: debugfs: aarch64 export cpu time related items to debugfs kvm: debugfs: Export x86 kvm exits to vcpu_stat arch/arm64/include/asm/kvm_host.h | 21 ++++ arch/arm64/kvm/arm.c | 23 +++++ arch/arm64/kvm/guest.c | 33 +++++++ arch/arm64/kvm/handle_exit.c | 8 ++ arch/arm64/kvm/hyp/include/hyp/switch.h | 1 + arch/arm64/kvm/mmu.c | 1 + arch/arm64/kvm/sys_regs.c | 11 +++ arch/x86/include/asm/kvm_host.h | 13 +++ arch/x86/kvm/vmx/vmx.c | 10 ++ arch/x86/kvm/x86.c | 70 +++++++++++++ include/linux/kvm_host.h | 19 ++++ virt/kvm/kvm_main.c | 125 ++++++++++++++++++++++++ 12 files changed, 335 insertions(+) -- 2.29.GIT

2 5

[PATCH OLK-5.10 0/3] Support MBIGEN
by Chen Jun 22 Dec '20

22 Dec '20

*** BLURB HERE *** Yang Yingliang (3): irqchip/mbigen: rename register marcros irqchip/mbigen: add support for a MBIGEN generating SPIs dt-bindings/irqchip/mbigen: add example of MBIGEN generate SPIs .../hisilicon,mbigen-v2.txt | 17 +++++++- drivers/irqchip/irq-mbigen.c | 39 +++++++++++++------ 2 files changed, 44 insertions(+), 12 deletions(-) -- 2.25.0

2 4

[PATCH OLK-5.10 0/4] kvm: debugfs: support vcpu_stat debugfs
by Jiajun Chen 22 Dec '20

22 Dec '20

From: chenjiajun <chenjiajun8(a)huawei.com> virt inclusion category: feature bugzilla: 46853 CVE: NA Export kvm vcpu info in debugfs entry /sys/kernel/debug/kvm/vcpu_stat, this entry contains kvm exits and cputime items now. And then, we can get all kvm vcpu info through this debugfs instead of one entry per kvm exits items, which will greatly facilitates the collection of performance status. Currently, only support x86 and aarch64. -- ChangeList: v2: modify architecture-dependent st_max to avoid compile err in other arches v1: kvm: debugfs: support vcpu_stat debugfs chenjiajun (4): kvm: debugfs: Export vcpu stat via debugfs kvm: debugfs: export remaining aarch64 kvm exit reasons to debugfs kvm: debugfs: aarch64 export cpu time related items to debugfs kvm: debugfs: Export x86 kvm exits to vcpu_stat arch/arm64/include/asm/kvm_host.h | 21 ++++ arch/arm64/kvm/arm.c | 23 +++++ arch/arm64/kvm/guest.c | 33 +++++++ arch/arm64/kvm/handle_exit.c | 8 ++ arch/arm64/kvm/hyp/include/hyp/switch.h | 1 + arch/arm64/kvm/mmu.c | 1 + arch/arm64/kvm/sys_regs.c | 11 +++ arch/x86/include/asm/kvm_host.h | 13 +++ arch/x86/kvm/vmx/vmx.c | 10 ++ arch/x86/kvm/x86.c | 70 +++++++++++++ include/linux/kvm_host.h | 19 ++++ virt/kvm/kvm_main.c | 124 ++++++++++++++++++++++++ 12 files changed, 334 insertions(+) -- 2.29.GIT

1 4