- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 v3 0/3] block: show info about opening a mounted device for write
by Li Lingfeng 04 Jan '24

04 Jan '24

Both writing a mounted device and writing part0 while mounting a partition will provide a prompt message. v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. Li Lingfeng (3): block: Add config to show info about opening a mounted device for write block: detect confilt of write and mount between partitions and part0 block: show info of confilt of write and mount between partitions and part0 block/Kconfig | 9 ++++ block/bdev.c | 120 +++++++++++++++++++++++++++++++++++++++++++++++--- 2 files changed, 122 insertions(+), 7 deletions(-) -- 2.31.1

2 4

[PATCH OLK-6.6 00/57] backport mainline md patch
by Li Nan 04 Jan '24

04 Jan '24

Alex Lyakas (1): md: Whenassemble the array, consult the superblock of the freshest device David Jeffery (1): md/raid6: use valid sector values to determine if an I/O should wait on the reshape Denis Plotnikov (1): md-cluster: check for timeout while a new disk adding Gou Hao (1): md/raid1: remove unnecessary null checking Junxiao Bi (2): md: bypass block throttle for superblock update Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d" Justin Stitt (1): md: replace deprecated strncpy with memcpy Li Nan (2): md: factor out a helper exceed_read_errors() to check read_errors md/raid1: support read error check Mariusz Tkaczyk (1): md: do not require mddev_lock() for all options in array_state_store() Yu Kuai (47): md: use separate work_struct for md_start_sync() md: factor out a helper to choose sync action from md_check_recovery() md: delay choosing sync action to md_start_sync() md: factor out a helper rdev_removeable() from remove_and_add_spares() md: factor out a helper rdev_is_spare() from remove_and_add_spares() md: factor out a helper rdev_addable() from remove_and_add_spares() md: delay remove_and_add_spares() for read only array to md_start_sync() md: initialize 'active_io' while allocating mddev md: initialize 'writes_pending' while allocating mddev md-bitmap: remove the checking of 'pers->quiesce' from location_store() md-bitmap: suspend array earlier in location_store() md: don't check 'mddev->pers' from suspend_hi_store() md: don't check 'mddev->pers' and 'pers->quiesce' from suspend_lo_store() md: factor out a helper from mddev_put() md: simplify md_seq_ops md/raid1: don't split discard io for write behind md: use READ_ONCE/WRITE_ONCE for 'suspend_lo' and 'suspend_hi' md/raid5-cache: use READ_ONCE/WRITE_ONCE for 'conf->log' md: replace is_md_suspended() with 'mddev->suspended' in md_check_recovery() md: add new helpers to suspend/resume array md: add new helpers to suspend/resume and lock/unlock array md/dm-raid: use new apis to suspend array md/md-bitmap: use new apis to suspend array for location_store() md/raid5-cache: use new apis to suspend array md/raid5: use new apis to suspend array md: use new apis to suspend array for sysfs apis md: use new apis to suspend array for adding/removing rdev from state_store() md: use new apis to suspend array for ioctls involed array reconfiguration md: use new apis to suspend array before mddev_create/destroy_serial_pool md: cleanup mddev_create/destroy_serial_pool() md/md-linear: cleanup linear_add() md/raid5: replace suspend with quiesce() callback md: suspend array in md_start_sync() if array need reconfiguration md: remove old apis to suspend the array md: rename __mddev_suspend/resume() back to mddev_suspend/resume() md: cleanup pers->prepare_suspend() md: remove flag RemoveSynchronized md/raid10: remove rcu protection to access rdev from conf md/raid1: remove rcu protection to access rdev from conf md/raid5: remove rcu protection to access rdev from conf md/md-multipath: remove rcu protection to access rdev from conf md: synchronize flush io with array reconfiguration md: fix missing flush of sync_work md: don't leave 'MD_RECOVERY_FROZEN' in error path of md_set_readonly() md: fix stopping sync thread md: split MD_RECOVERY_NEEDED out of mddev_resume dm-raid: delay flushing event_work() after reconfig_mutex is released drivers/md/md.h | 75 +-- drivers/md/raid5.h | 4 +- drivers/md/dm-raid.c | 20 +- drivers/md/md-autodetect.c | 4 +- drivers/md/md-bitmap.c | 61 +- drivers/md/md-cluster.c | 15 +- drivers/md/md-linear.c | 2 - drivers/md/md-multipath.c | 32 +- drivers/md/md.c | 1089 ++++++++++++++++++++---------------- drivers/md/raid1-10.c | 54 ++ drivers/md/raid1.c | 97 ++-- drivers/md/raid10.c | 274 ++------- drivers/md/raid5-cache.c | 75 ++- drivers/md/raid5-ppl.c | 16 +- drivers/md/raid5.c | 310 +++------- 15 files changed, 995 insertions(+), 1133 deletions(-) -- 2.39.2

2 58

[PATCH OLK-6.6 0/2] Add huge page allocation limit
by Liu Shixin 04 Jan '24

04 Jan '24

Ensure the system has sufficient available memory. Kefeng Wang (2): hugetlb: Add huge page allocation limit openeuler_defconfig: enable HUGETLB_ALLOC_LIMIT .../admin-guide/kernel-parameters.txt | 10 +++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 14 ++++ mm/hugetlb.c | 78 +++++++++++++++++++ 5 files changed, 104 insertions(+) -- 2.25.1

2 3

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 04 Jan '24

04 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 52 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 3 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 10 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 103 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 00/18] md mainline patch backport (1)
by Li Nan 04 Jan '24

04 Jan '24

Justin Stitt (1): md: replace deprecated strncpy with memcpy Mariusz Tkaczyk (1): md: do not require mddev_lock() for all options in array_state_store() Yu Kuai (16): md: use separate work_struct for md_start_sync() md: factor out a helper to choose sync action from md_check_recovery() md: delay choosing sync action to md_start_sync() md: factor out a helper rdev_removeable() from remove_and_add_spares() md: factor out a helper rdev_is_spare() from remove_and_add_spares() md: factor out a helper rdev_addable() from remove_and_add_spares() md: delay remove_and_add_spares() for read only array to md_start_sync() md: initialize 'active_io' while allocating mddev md: initialize 'writes_pending' while allocating mddev md-bitmap: remove the checking of 'pers->quiesce' from location_store() md-bitmap: suspend array earlier in location_store() md: don't check 'mddev->pers' from suspend_hi_store() md: don't check 'mddev->pers' and 'pers->quiesce' from suspend_lo_store() md: factor out a helper from mddev_put() md: simplify md_seq_ops md/raid1: don't split discard io for write behind drivers/md/md.h | 9 +- drivers/md/dm-raid.c | 7 +- drivers/md/md-bitmap.c | 47 ++-- drivers/md/md.c | 578 +++++++++++++++++++++++------------------ drivers/md/raid1.c | 6 +- drivers/md/raid10.c | 3 - drivers/md/raid5.c | 3 - 7 files changed, 359 insertions(+), 294 deletions(-) -- 2.39.2

2 19

[PATCH openEuler-1.0-LTS 0/3] Fix bugs from LTS patches
by Zhang Zekun 04 Jan '24

04 Jan '24

Bugfix from linux stable patches Mukesh Ojha (2): devcoredump : Serialize devcd_del work devcoredump: Send uevent once devcd is ready Saravana Kannan (1): driver core: Release all resources during unbind before updating device links drivers/base/dd.c | 4 +- drivers/base/devcoredump.c | 86 +++++++++++++++++++++++++++++++++++++- 2 files changed, 86 insertions(+), 4 deletions(-) -- 2.17.1

2 4

[PATCH OLK-5.10 00/11] md: mainline backport
by Li Nan 04 Jan '24

04 Jan '24

Christoph Hellwig (6): md: convert to blk_alloc_disk/blk_cleanup_disk md: add the bitmap group to the default groups for the md kobject md: extend disks_mutex coverage md: properly unwind when failing to add the kobject in md_alloc md: fix mddev->kobj lifetime md: fix error handling in md_alloc Eric Dumazet (1): md: use msleep() in md_notify_reboot() Luis Chamberlain (1): md: add error handling support for add_disk() Rikard Falkeborn (1): md: Constify attribute_group structs Yu Kuai (1): md/raid10: fix improper BUG_ON() in raise_barrier() zhangyue (1): md: fix double free of mddev->private in autorun_array() drivers/md/md.h | 4 +- drivers/md/md-bitmap.c | 2 +- drivers/md/md.c | 108 ++++++++++++++++++++++++----------------- drivers/md/raid10.c | 2 +- drivers/md/raid5.c | 2 +- 5 files changed, 68 insertions(+), 50 deletions(-) -- 2.39.2

2 12

[PATCH OpenEuler-1.0-LTS 0/3] Fix bugs from LTS patches
by Zhang Zekun 04 Jan '24

04 Jan '24

Bugfix from linux stable patches Mukesh Ojha (2): devcoredump : Serialize devcd_del work devcoredump: Send uevent once devcd is ready Saravana Kannan (1): driver core: Release all resources during unbind before updating device links drivers/base/dd.c | 4 +- drivers/base/devcoredump.c | 86 +++++++++++++++++++++++++++++++++++++- 2 files changed, 86 insertions(+), 4 deletions(-) -- 2.17.1

2 4

[PATCH OLK-6.6] livepatch/core: Fix miss disable ro for MOD_RO_AFTER_INIT memory
by Zheng Yejian 04 Jan '24

04 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8HNHM -------------------------------- It was missed to set MOD_RO_AFTER_INIT type memory to be writable when porting c8783f92771c ("livepatch/core: Revert module_enable_ro and module_disable_ro"). Thanks the report from laokz in https://gitee.com/laokz/klpmake/issues/I8HFMR. Fixes: c8783f92771c ("livepatch/core: Revert module_enable_ro and module_disable_ro") Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- kernel/module/strict_rwx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/module/strict_rwx.c b/kernel/module/strict_rwx.c index 397e18f50517..575bf99c723a 100644 --- a/kernel/module/strict_rwx.c +++ b/kernel/module/strict_rwx.c @@ -46,6 +46,7 @@ void module_disable_ro(const struct module *mod) module_set_memory(mod, MOD_INIT_TEXT, set_memory_rw); module_set_memory(mod, MOD_RODATA, set_memory_rw); module_set_memory(mod, MOD_INIT_RODATA, set_memory_rw); + module_set_memory(mod, MOD_RO_AFTER_INIT, set_memory_rw); } #endif /* CONFIG_LIVEPATCH_WO_FTRACE */ -- 2.25.1

2 1

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 04 Jan '24

04 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 3 --- include/linux/pid_namespace.h | 1 + kernel/pid.c | 42 ++++++++++++++++++++++++++++++----- kernel/pid_namespace.c | 6 +++-- kernel/sysctl.c | 9 -------- kernel/trace/pid_list.c | 2 +- kernel/trace/trace.c | 2 +- kernel/trace/trace.h | 2 -- 8 files changed, 43 insertions(+), 24 deletions(-) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..7f0f84a368b7 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,9 +113,6 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; -extern int pid_max; -extern int pid_max_min, pid_max_max; - /* * look up a PID in the hash table. Must be called with the tasklist_lock * or rcu_read_lock() held. diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..338012f75f6a 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,7 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; + int pid_max; int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..1cf72619d922 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -43,6 +43,7 @@ #include <linux/sched/task.h> #include <linux/idr.h> #include <net/sock.h> +#include <linux/kmemleak.h> #include <uapi/linux/pidfd.h> struct pid init_struct_pid = { @@ -59,12 +60,10 @@ struct pid init_struct_pid = { }, } }; -int pid_max = PID_MAX_DEFAULT; - #define RESERVED_PIDS 300 -int pid_max_min = RESERVED_PIDS + 1; -int pid_max_max = PID_MAX_LIMIT; +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +79,7 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, + .pid_max = PID_MAX_DEFAULT, #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +194,7 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; - if (tid < 1 || tid >= pid_max) + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +234,7 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, - pid_max, GFP_ATOMIC); + tmp->pid_max, GFP_ATOMIC); } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +646,34 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; + void __init pid_idr_init(void) { + int pid_max = init_pid_ns.pid_max; + /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +684,8 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); + init_pid_ns.pid_max = pid_max; + idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +693,8 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); + + register_sysctl_init("kernel", pid_ctl_table); } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..f66e4f866472 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,7 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; + ns->pid_max = parent_pid_ns->pid_max; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +296,8 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; + tmp.extra2 = &pid_ns->pid_max; + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +305,6 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } -extern int pid_max; static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +312,7 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, - .extra2 = &pid_max, + .extra2 = &init_pid_ns.pid_max, }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..b000e733281e 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,15 +1809,6 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif - { - .procname = "pid_max", - .data = &pid_max, - .maxlen = sizeof (int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &pid_max_min, - .extra2 = &pid_max_max, - }, { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..2ff4259928ae 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,7 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ - WARN_ON_ONCE(pid_max > (1 << 30)); + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a40d6baf101f..2fac76f2a865 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5466,7 +5466,7 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { - tgid_map_max = pid_max; + tgid_map_max = init_pid_ns.pid_max; map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..6077db8894fd 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,8 +695,6 @@ extern unsigned long tracing_thresh; /* PID filtering */ -extern int pid_max; - bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); bool trace_ignore_this_task(struct trace_pid_list *filtered_pids, -- 2.25.1

2 1