- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 00/10] files cgroup all patch
by chenridong 23 Dec '23

23 Dec '23

Binder Makin (1): cgroups: Resource controller for open files Hou Tao (1): cgroup/files: use task_get_css() to get a valid css during dup_fd() Lu Jialin (2): fs: fix files.usage bug when move tasks fs/filescontrol.c: fix warning:large integer implicitly truncated to unsigned type Wenkai Lin (1): iommu/arm-smmu-v3: disable stall for quiet_cd Yang Yingliang (1): cgroup/files: support boot parameter to control if disable files cgroup Yu Kuai (1): fs/filescontrol: add a switch to enable / disable accounting of open fds Zhang Xiaoxu (2): files_cgroup: fix error pointer when kvm_vm_worker_thread files_cgroup: Fix soft lockup when refcnt overflow. zhangyi (F) (1): filescontrol: silence suspicious RCU warning -- 2.34.1

2 11

[PATCH openEuler-1.0-LTS] net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
by Liu Jian 22 Dec '23

22 Dec '23

mainline inclusion from mainline-v01a564bab4876007ce35f312e16797dfe40e4823 remotes/mainline/master commit 01a564bab4876007ce35f312e16797dfe40e4823 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KNM7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- I got the below warning trace: WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0 Call Trace: rtnl_dellink rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg __sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 entry_SYSCALL_64_after_hwframe It can be repoduced via: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode 0 ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 ip netns exec ns1 ip link set bond_slave_1 master bond0 [1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off [2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0 [3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0 [4] ip netns exec ns1 ip link set bond_slave_1 nomaster [5] ip netns exec ns1 ip link del veth2 ip netns del ns1 This is all caused by command [1] turning off the rx-vlan-filter function of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands [2] [3] add the same vid to slave and master respectively, causing command [4] to empty slave->vlan_info. The following command [5] triggers this problem. To fix this problem, we should add VLAN_FILTER feature checks in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect addition or deletion of vlan_vid information. Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device") Signed-off-by: Liu Jian <liujian56(a)huawei.com> Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> (cherry picked from commit 01a564bab4876007ce35f312e16797dfe40e4823) Signed-off-by: Liu Jian <liujian56(a)huawei.com> --- net/8021q/vlan_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 4f60e86f4b8d3..e92c914316cbd 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -380,6 +380,8 @@ int vlan_vids_add_by_dev(struct net_device *dev, return 0; list_for_each_entry(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; err = vlan_vid_add(dev, vid_info->proto, vid_info->vid); if (err) goto unwind; @@ -390,6 +392,8 @@ int vlan_vids_add_by_dev(struct net_device *dev, list_for_each_entry_continue_reverse(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; vlan_vid_del(dev, vid_info->proto, vid_info->vid); } @@ -409,8 +413,11 @@ void vlan_vids_del_by_dev(struct net_device *dev, if (!vlan_info) return; - list_for_each_entry(vid_info, &vlan_info->vid_list, list) + list_for_each_entry(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; vlan_vid_del(dev, vid_info->proto, vid_info->vid); + } } EXPORT_SYMBOL(vlan_vids_del_by_dev); -- 2.34.1

2 1

[PATCH OLK-5.10] mm/memcontrol: mitigate cacheline false sharing in struct mem_cgroup
by Zeng Heng 22 Dec '23

22 Dec '23

hulk inclusion category: performance bugzilla: https://gitee.com/openeuler/kernel/issues/I8QP0D -------------------------------- Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- mm/memcontrol.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index c9ffc793e42b..42ed5778062a 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -6261,6 +6261,11 @@ static void free_mem_cgroup_per_node_info(struct mem_cgroup *memcg, int node) kfree(pn); } +struct mem_cgroup_padding { + u64 padding[6]; + struct mem_cgroup memcg; +} __attribute__((__packed__)); + static void __mem_cgroup_free(struct mem_cgroup *memcg) { int node; @@ -6269,7 +6274,8 @@ static void __mem_cgroup_free(struct mem_cgroup *memcg) free_mem_cgroup_per_node_info(memcg, node); free_percpu(memcg->vmstats_percpu); memcg_free_swap_device(memcg); - kfree(memcg); + + kfree(container_of(memcg, struct mem_cgroup_padding, memcg)); } static void mem_cgroup_free(struct mem_cgroup *memcg) @@ -6280,19 +6286,22 @@ static void mem_cgroup_free(struct mem_cgroup *memcg) static struct mem_cgroup *mem_cgroup_alloc(void) { + struct mem_cgroup_padding *memcg_padding; struct mem_cgroup *memcg; unsigned int size; int node; int __maybe_unused i; long error = -ENOMEM; - size = sizeof(struct mem_cgroup); + size = sizeof(struct mem_cgroup_padding); size += nr_node_ids * sizeof(struct mem_cgroup_per_node *); - memcg = kzalloc(size, GFP_KERNEL); - if (!memcg) + memcg_padding = kzalloc(size, GFP_KERNEL); + if (!memcg_padding) return ERR_PTR(error); + memcg = &memcg_padding->memcg; + if (memcg_alloc_swap_device(memcg)) goto fail; -- 2.25.1

2 1

[PATCH OLK-6.6 0/2] block: show info about opening a mounted device for write
by Li Lingfeng 22 Dec '23

22 Dec '23

Both writing a mounted device and writing part0 while mounting a partition will provide a prompt message. Li Lingfeng (2): block: Add config to show info about opening a mounted device for write block: detect confilt of write and mount between partitions and part0 block/Kconfig | 7 +++++ block/bdev.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++-- 2 files changed, 83 insertions(+), 2 deletions(-) -- 2.31.1

2 3

[PATCH OLK-5.10] iommu/iova: Change the location of depot_size to avoid cache fake share
by Zhang Zekun 22 Dec '23

22 Dec '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8QOK2 CVE: NA ------------------------------------ Cache fake share could cause performance decrease. Change the location of depot_size to avoid this problem. Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- include/linux/iova.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/iova.h b/include/linux/iova.h index 25c447124638..8190fb2bf496 100644 --- a/include/linux/iova.h +++ b/include/linux/iova.h @@ -29,11 +29,11 @@ struct iova_cpu_rcache; struct iova_rcache { spinlock_t lock; - unsigned int depot_size; struct iova_magazine *depot; struct iova_cpu_rcache __percpu *cpu_rcaches; struct iova_domain *iovad; struct delayed_work work; + unsigned int depot_size; }; struct iova_domain; -- 2.17.1

2 1

[PATCH OLK-6.6 0/4] olk5.10 bugs related to cgroup
by chenridong 22 Dec '23

22 Dec '23

Lu Jialin (1): cgroup: Return ERSCH when add Z process into task Zefan Li (1): cgroup: check if cgroup root is alive in cgroupstats_show() chenridong (2): cgroup: wait for cgroup destruction to complete when umount cgroup: disable kernel memory accounting for all memory cgroups by default .../admin-guide/cgroup-v1/memory.rst | 6 ++--- .../admin-guide/kernel-parameters.txt | 1 + include/linux/cgroup-defs.h | 3 +++ kernel/cgroup/cgroup-v1.c | 11 +++++---- kernel/cgroup/cgroup.c | 23 +++++++++++++++++-- mm/memcontrol.c | 4 +++- 6 files changed, 38 insertions(+), 10 deletions(-) -- 2.34.1

2 5

[PATCH OLK-6.6 0/4] Fix smmu pgtable prfetch and add support
by Zhang Zekun 22 Dec '23

22 Dec '23

Fix the pgtable prefetch problem, besides add some ras features which is used in ascend scenarios. Zhang Zekun (4): iommu/arm-smmu-v3: Add a SYNC command to avoid broken page table prefetch mm: memory-failure: Directly return the task for specific use ACPI: APEI: Don't call notifier again in ts senario mm/hwpoison: Add to check is a page is hwpoisoned arch/arm64/Kconfig | 13 +++++++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/cpu_errata.c | 14 +++++++++ arch/arm64/tools/cpucaps | 1 + drivers/acpi/apei/ghes.c | 3 ++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 20 +++++++++++++ include/linux/mm.h | 5 ++++ mm/Kconfig | 9 ++++++ mm/memory-failure.c | 32 +++++++++++++++++++++ 9 files changed, 98 insertions(+) -- 2.17.1

2 6

[OLK-5.10 1/3] RDMA/hns: Fix Use-After-Free of rsv_qp
by Chengchang Tang 22 Dec '23

22 Dec '23

From: wenglianfa <wenglianfa(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8N7BG ---------------------------------------------------------------------- For the HIP08, the reserved loopback QP is used to release MRs before the MPT is destroyed. After free_mr_exit() and before hns_roce_unregister_device(), rsv_qp is released and set to NULL, and ib_device is not unregister. During this period, the user mode can use ib_device to execute dereg_mr(). As a result, rsv_qp is accessed again and a NULL pointer is reported. To fix Use-After-Free of rsv_qp, execute free_mr_exit() after hns_roce_unregister_device(). Fixes: 6f5f556d3795 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT") Signed-off-by: wenglianfa <wenglianfa(a)huawei.com> Signed-off-by: Juan Zhou <zhoujuan51(a)h-partners.com> --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 2b474c22cafa..34d5d1476db2 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -3339,6 +3339,9 @@ static int hns_roce_v2_init(struct hns_roce_dev *hr_dev) static void hns_roce_v2_exit(struct hns_roce_dev *hr_dev) { + if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08) + free_mr_exit(hr_dev); + hns_roce_function_clear(hr_dev); if (!hr_dev->is_vf) @@ -7699,9 +7702,6 @@ static void __hns_roce_hw_v2_uninit_instance(struct hnae3_handle *handle, hr_dev->state = HNS_ROCE_DEVICE_STATE_UNINIT; hns_roce_handle_device_err(hr_dev); - if (hr_dev->pci_dev->revision == PCI_REVISION_ID_HIP08) - free_mr_exit(hr_dev); - hns_roce_exit(hr_dev, bond_cleanup); kfree(hr_dev->priv); ib_dealloc_device(&hr_dev->ib_dev); -- 2.30.0

1 0

[PATCH OLK-6.6 0/1] arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled
by Liao Chen 22 Dec '23

22 Dec '23

arch/arm64/kernel/ipi_nmi.c: In function ¡®ipi_nmi_handler¡¯: arch/arm64/kernel/ipi_nmi.c:54:7: error: implicit declaration of function ¡®kgdb_nmicallback¡¯ [-Werror=implicit-function-declaration] if (!kgdb_nmicallback(cpu, get_irq_regs())) ^~~~~~~~~~~~~~~~ Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm64/kernel/ipi_nmi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) -- 2.34.1

2 2

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 22 Dec '23

22 Dec '23

*** BLURB HERE *** Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/kernel/ipi_nmi.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) -- 2.34.1

2 2