- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] crypto: hisilicon - reset before init the device
by w00416078 21 Sep '23

21 Sep '23

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I830AI CVE: NA -------------------------------- Before initializing the device, reset the device to clear the residual data to prevent unexpected problems, such as reboot scene, which may maintain device state before reboot. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> --- drivers/crypto/hisilicon/hpre/hpre_main.c | 68 +++++++++++-------- drivers/crypto/hisilicon/qm.c | 83 ++++++++++++++++------- drivers/crypto/hisilicon/rde/rde_main.c | 64 ++++++++--------- drivers/crypto/hisilicon/sec2/sec_main.c | 39 ++++++----- drivers/crypto/hisilicon/zip/zip_main.c | 42 +++++++----- 5 files changed, 175 insertions(+), 121 deletions(-) diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index 1a980f255ad4..cbe8ea438fd2 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -780,28 +780,6 @@ static void hpre_debugfs_exit(struct hisi_qm *qm) debugfs_remove_recursive(qm->debug.debug_root); } -static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) -{ - int ret; - - qm->algs = "rsa\ndh\n"; - qm->uacce_mode = uacce_mode; - qm->pdev = pdev; - ret = hisi_qm_pre_init(qm, pf_q_num, HPRE_PF_DEF_Q_BASE); - if (ret) - return ret; - if (qm->ver == QM_HW_V1) { - pci_warn(pdev, "HPRE version 1 is not supported!\n"); - return -EINVAL; - } - - qm->qm_list = &hpre_devices; - qm->sqe_size = HPRE_SQE_SIZE; - qm->dev_name = hpre_name; - - return 0; -} - static void hpre_log_hw_error(struct hisi_qm *qm, u32 err_sts) { const struct hpre_hw_error *err = hpre_hw_errors; @@ -836,30 +814,36 @@ static void hpre_open_axi_master_ooo(struct hisi_qm *qm) HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); } -static int hpre_pf_probe_init(struct hisi_qm *qm) +static void hpre_err_ini_set(struct hisi_qm *qm) { - int ret; - - if (qm->ver != QM_HW_V2) - return -EINVAL; + if (qm->fun_type == QM_HW_VF) + return; - qm->ctrl_q_num = HPRE_QUEUE_NUM_V2; qm->err_ini.get_dev_hw_err_status = hpre_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = hpre_clear_hw_err_status; qm->err_ini.err_info.ecc_2bits_mask = HPRE_CORE_ECC_2BIT_ERR | - HPRE_OOO_ECC_2BIT_ERR; + HPRE_OOO_ECC_2BIT_ERR; qm->err_ini.err_info.ce = QM_BASE_CE; qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; qm->err_ini.err_info.fe = 0; qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; qm->err_ini.err_info.acpi_rst = "HRST"; - qm->err_ini.hw_err_disable = hpre_hw_error_disable; qm->err_ini.hw_err_enable = hpre_hw_error_enable; qm->err_ini.set_usr_domain_cache = hpre_set_user_domain_and_cache; qm->err_ini.log_dev_hw_err = hpre_log_hw_error; qm->err_ini.open_axi_master_ooo = hpre_open_axi_master_ooo; qm->err_ini.err_info.msi_wr_port = HPRE_WR_MSI_PORT; +} + +static int hpre_pf_probe_init(struct hisi_qm *qm) +{ + int ret; + + if (qm->ver != QM_HW_V2) + return -EINVAL; + + qm->ctrl_q_num = HPRE_QUEUE_NUM_V2; ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) @@ -870,6 +854,30 @@ static int hpre_pf_probe_init(struct hisi_qm *qm) return 0; } +static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) +{ + int ret; + + qm->algs = "rsa\ndh\n"; + qm->uacce_mode = uacce_mode; + qm->pdev = pdev; + ret = hisi_qm_pre_init(qm, pf_q_num, HPRE_PF_DEF_Q_BASE); + if (ret) + return ret; + + if (qm->ver == QM_HW_V1) { + pci_warn(pdev, "HPRE version 1 is not supported!\n"); + return -EINVAL; + } + + qm->qm_list = &hpre_devices; + qm->sqe_size = HPRE_SQE_SIZE; + qm->dev_name = hpre_name; + hpre_err_ini_set(qm); + + return 0; +} + static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct hisi_qm *qm; diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 739b1a6565fd..f2706dc0d55e 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -230,6 +230,7 @@ #define QMC_ALIGN(sz) ALIGN(sz, 32) static int __hisi_qm_start(struct hisi_qm *qm); +static int qm_reset_device(struct hisi_qm *qm); enum vft_type { SQC_VFT = 0, @@ -2584,6 +2585,30 @@ static int hisi_qm_memory_init(struct hisi_qm *qm) return ret; } +static int qm_clear_device(struct hisi_qm *qm) +{ + u32 val; + int ret; + + if (qm->fun_type == QM_HW_VF) + return 0; + + /* OOO register set and check */ + writel(MASTER_GLOBAL_CTRL_SHUTDOWN, qm->io_base + MASTER_GLOBAL_CTRL); + + ret = readl_relaxed_poll_timeout(qm->io_base + MASTER_TRANS_RETURN, + val, (val == MASTER_TRANS_RETURN_RW), + QM_REG_RD_INTVRL_US, + QM_REG_RD_TMOUT_US); + if (ret) { + pci_warn(qm->pdev, "Device is busy, can not clear device.\n"); + writel(0x0, qm->io_base + MASTER_GLOBAL_CTRL); + return ret; + } + + return qm_reset_device(qm); +} + static int hisi_qm_pci_init(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; @@ -2626,8 +2651,14 @@ static int hisi_qm_pci_init(struct hisi_qm *qm) goto err_set_mask_and_coherent; } + ret = qm_clear_device(qm); + if (ret) + goto err_free_vectors; + return 0; +err_free_vectors: + pci_free_irq_vectors(pdev); err_set_mask_and_coherent: devm_iounmap(dev, qm->io_base); err_ioremap: @@ -3808,6 +3839,34 @@ static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm) } } +static int qm_reset_device(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + unsigned long long value = 0; + acpi_status s; + + /* The reset related sub-control registers are not in PCI BAR */ + if (ACPI_HANDLE(&pdev->dev)) { + s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), + qm->err_ini.err_info.acpi_rst, + NULL, &value); + if (ACPI_FAILURE(s)) { + pci_err(pdev, "NO controller reset method!\n"); + return -EIO; + } + + if (value) { + pci_err(pdev, "Reset step %llu failed!\n", value); + return -EIO; + } + + return 0; + } + + pci_err(pdev, "No reset method!\n"); + return -EINVAL; +} + static int qm_soft_reset(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; @@ -3853,29 +3912,7 @@ static int qm_soft_reset(struct hisi_qm *qm) return ret; } - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(&pdev->dev)) { - unsigned long long value = 0; - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - qm->err_ini.err_info.acpi_rst, - NULL, &value); - if (ACPI_FAILURE(s)) { - pci_err(pdev, "NO controller reset method!\n"); - return -EIO; - } - - if (value) { - pci_err(pdev, "Reset step %llu failed!\n", value); - return -EIO; - } - } else { - pci_err(pdev, "No reset method!\n"); - return -EINVAL; - } - - return 0; + return qm_reset_device(qm); } static int qm_vf_reset_done(struct pci_dev *pdev, diff --git a/drivers/crypto/hisilicon/rde/rde_main.c b/drivers/crypto/hisilicon/rde/rde_main.c index f3f70079aa77..f2e00ff891db 100644 --- a/drivers/crypto/hisilicon/rde/rde_main.c +++ b/drivers/crypto/hisilicon/rde/rde_main.c @@ -28,15 +28,8 @@ #define HRDE_QUEUE_NUM_V2 1024 #define HRDE_PCI_DEVICE_ID 0xa25a #define HRDE_SQE_SIZE 64 -#define HRDE_SQ_SIZE (HRDE_SQE_SIZE * QM_Q_DEPTH) #define HRDE_PF_DEF_Q_NUM 64 #define HRDE_PF_DEF_Q_BASE 0 -#define HRDE_RD_INTVRL_US 10 -#define HRDE_RD_TMOUT_US 1000 -#define HRDE_RST_TMOUT_MS 400 -#define HRDE_ENABLE 1 -#define HRDE_DISABLE 0 -#define HRDE_PCI_COMMAND_INVALID 0xFFFFFFFF #define HRDE_RAS_INT_MSK 0x310290 #define HRDE_RAS_CE_MSK BIT(2) @@ -101,7 +94,7 @@ static struct hisi_qm_list rde_devices; static void hisi_rde_ras_proc(struct work_struct *work); static const struct hisi_rde_hw_error rde_hw_error[] = { - {.int_msk = BIT(0), .msg = "Rde_ecc_1bitt_err"}, + {.int_msk = BIT(0), .msg = "Rde_ecc_1bit_err"}, {.int_msk = BIT(1), .msg = "Rde_ecc_2bit_err"}, {.int_msk = BIT(2), .msg = "Rde_stat_mgmt_state_timeout_err"}, {.int_msk = BIT(3), .msg = "Rde_data_wr_state_timeout_err"}, @@ -269,7 +262,7 @@ static int hisi_rde_set_user_domain_and_cache(struct hisi_qm *qm) writel(AXI_M_CFG, qm->io_base + QM_AXI_M_CFG); writel(AXI_M_CFG_ENABLE, qm->io_base + QM_AXI_M_CFG_ENABLE); - /* disable BME/PM/SRIOV FLR*/ + /* disable BME/PM/SRIOV FLR */ writel(PEH_AXUSER_CFG, qm->io_base + QM_PEH_AXUSER_CFG); writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + QM_PEH_AXUSER_CFG_ENABLE); @@ -351,7 +344,7 @@ static int current_qm_write(struct ctrl_debug_file *file, u32 val) u32 tmp; if (val > 0) { - pr_err("Function id should be smaller than 0.\n"); + pr_err("Function id should be equal to 0.\n"); return -EINVAL; } @@ -423,7 +416,7 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, size_t count, loff_t *pos) { struct ctrl_debug_file *file = filp->private_data; - char tbuf[20]; + char tbuf[HRDE_DBGFS_VAL_MAX_LEN]; unsigned long val; int len, ret; @@ -623,6 +616,24 @@ static void hisi_rde_open_master_ooo(struct hisi_qm *qm) writel(val | HRDE_AXI_SHUTDOWN_EN, qm->io_base + HRDE_CFG); } +static void hisi_rde_err_ini_set(struct hisi_qm *qm) +{ + qm->err_ini.get_dev_hw_err_status = hisi_rde_get_hw_err_status; + qm->err_ini.clear_dev_hw_err_status = hisi_rde_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = 0; + qm->err_ini.err_info.acpi_rst = "RRST"; + qm->err_ini.hw_err_disable = hisi_rde_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_rde_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_rde_set_user_domain_and_cache; + qm->err_ini.log_dev_hw_err = hisi_rde_hw_error_log; + qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; + qm->err_ini.err_info.msi_wr_port = HRDE_WR_MSI_PORT; +} + static int hisi_rde_pf_probe_init(struct hisi_qm *qm) { struct hisi_rde *hisi_rde = container_of(qm, struct hisi_rde, qm); @@ -649,21 +660,6 @@ static int hisi_rde_pf_probe_init(struct hisi_qm *qm) return -EINVAL; } - qm->err_ini.get_dev_hw_err_status = hisi_rde_get_hw_err_status; - qm->err_ini.clear_dev_hw_err_status = hisi_rde_clear_hw_err_status; - qm->err_ini.err_info.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; - qm->err_ini.err_info.ce = QM_BASE_CE; - qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; - qm->err_ini.err_info.fe = 0; - qm->err_ini.err_info.msi = 0; - qm->err_ini.err_info.acpi_rst = "RRST"; - qm->err_ini.hw_err_disable = hisi_rde_hw_error_disable; - qm->err_ini.hw_err_enable = hisi_rde_hw_error_enable; - qm->err_ini.set_usr_domain_cache = hisi_rde_set_user_domain_and_cache; - qm->err_ini.log_dev_hw_err = hisi_rde_hw_error_log; - qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; - qm->err_ini.err_info.msi_wr_port = HRDE_WR_MSI_PORT; - ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) return ret; @@ -690,6 +686,7 @@ static int hisi_rde_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->sqe_size = HRDE_SQE_SIZE; qm->dev_name = hisi_rde_name; qm->abnormal_fix = hisi_rde_abnormal_fix; + hisi_rde_err_ini_set(qm); return 0; } @@ -727,31 +724,31 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) ret = hisi_rde_qm_pre_init(qm, pdev); if (ret) { - pci_err(pdev, "Pre init qm failed!\n"); + pci_err(pdev, "Failed to pre init qm!\n"); return ret; } ret = hisi_qm_init(qm); if (ret) { - pci_err(pdev, "Init qm failed!\n"); + pci_err(pdev, "Failed to init qm!\n"); return ret; } ret = hisi_rde_pf_probe_init(qm); if (ret) { - pci_err(pdev, "Init pf failed!\n"); + pci_err(pdev, "Failed to init pf!\n"); goto err_qm_uninit; } ret = hisi_qm_start(qm); if (ret) { - pci_err(pdev, "Start qm failed!\n"); + pci_err(pdev, "Failed to start qm!\n"); goto err_qm_uninit; } ret = hisi_rde_debugfs_init(qm); if (ret) - pci_warn(pdev, "Init debugfs failed!\n"); + pci_warn(pdev, "Failed to init debugfs!\n"); hisi_qm_add_to_list(qm, &rde_devices); @@ -793,8 +790,7 @@ static void hisi_rde_ras_proc(struct work_struct *work) ret = hisi_qm_process_dev_error(pdev); if (ret == PCI_ERS_RESULT_NEED_RESET) if (hisi_qm_controller_reset(&hisi_rde->qm)) - dev_err(&pdev->dev, "Hisi_rde reset fail.\n"); - + dev_err(&pdev->dev, "Failed to reset device!\n"); } int hisi_rde_abnormal_fix(struct hisi_qm *qm) @@ -850,7 +846,7 @@ static int __init hisi_rde_init(void) ret = pci_register_driver(&hisi_rde_pci_driver); if (ret < 0) { hisi_rde_unregister_debugfs(); - pr_err("Register pci driver failed.\n"); + pr_err("Failed to register pci driver!\n"); } return ret; diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index a568d5363c1e..0f32dcb69e12 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -712,29 +712,17 @@ static void sec_open_axi_master_ooo(struct hisi_qm *qm) writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); } -static int sec_pf_probe_init(struct hisi_qm *qm) +static void sec_err_ini_set(struct hisi_qm *qm) { - int ret; - - switch (qm->ver) { - case QM_HW_V1: - qm->ctrl_q_num = SEC_QUEUE_NUM_V1; - break; - - case QM_HW_V2: - qm->ctrl_q_num = SEC_QUEUE_NUM_V2; - break; - - default: - return -EINVAL; - } + if (qm->fun_type == QM_HW_VF) + return; qm->err_ini.get_dev_hw_err_status = sec_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = sec_clear_hw_err_status; qm->err_ini.err_info.ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC; qm->err_ini.err_info.ce = QM_BASE_CE; qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT | - QM_ACC_WB_NOT_READY_TIMEOUT; + QM_ACC_WB_NOT_READY_TIMEOUT; qm->err_ini.err_info.fe = 0; qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; qm->err_ini.err_info.acpi_rst = "SRST"; @@ -744,6 +732,24 @@ static int sec_pf_probe_init(struct hisi_qm *qm) qm->err_ini.log_dev_hw_err = sec_log_hw_error; qm->err_ini.open_axi_master_ooo = sec_open_axi_master_ooo; qm->err_ini.err_info.msi_wr_port = SEC_WR_MSI_PORT; +} + +static int sec_pf_probe_init(struct hisi_qm *qm) +{ + int ret; + + switch (qm->ver) { + case QM_HW_V1: + qm->ctrl_q_num = SEC_QUEUE_NUM_V1; + break; + + case QM_HW_V2: + qm->ctrl_q_num = SEC_QUEUE_NUM_V2; + break; + + default: + return -EINVAL; + } ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) @@ -807,6 +813,7 @@ static int sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->qm_list = &sec_devices; qm->sqe_size = SEC_SQE_SIZE; qm->dev_name = sec_name; + sec_err_ini_set(qm); return 0; } diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index 17bbab667553..1ca51793e26a 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -204,7 +204,7 @@ static struct debugfs_reg32 hzip_dfx_regs[] = { {"HZIP_AVG_DELAY ", 0x28ull}, {"HZIP_MEM_VISIBLE_DATA ", 0x30ull}, {"HZIP_MEM_VISIBLE_ADDR ", 0x34ull}, - {"HZIP_COMSUMED_BYTE ", 0x38ull}, + {"HZIP_CONSUMED_BYTE ", 0x38ull}, {"HZIP_PRODUCED_BYTE ", 0x40ull}, {"HZIP_COMP_INF ", 0x70ull}, {"HZIP_PRE_OUT ", 0x78ull}, @@ -755,6 +755,28 @@ static void hisi_zip_close_axi_master_ooo(struct hisi_qm *qm) qm->io_base + HZIP_CORE_INT_SET); } +static void hisi_zip_err_ini_set(struct hisi_qm *qm) +{ + if (qm->fun_type == QM_HW_VF) + return; + + qm->err_ini.get_dev_hw_err_status = hisi_zip_get_hw_err_status; + qm->err_ini.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; + qm->err_ini.err_info.acpi_rst = "ZRST"; + qm->err_ini.hw_err_disable = hisi_zip_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_zip_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_zip_set_user_domain_and_cache; + qm->err_ini.log_dev_hw_err = hisi_zip_log_hw_error; + qm->err_ini.open_axi_master_ooo = hisi_zip_open_axi_master_ooo; + qm->err_ini.close_axi_master_ooo = hisi_zip_close_axi_master_ooo; + qm->err_ini.err_info.msi_wr_port = HZIP_WR_PORT; +} + static int hisi_zip_pf_probe_init(struct hisi_qm *qm) { struct hisi_zip *zip = container_of(qm, struct hisi_zip, qm); @@ -781,23 +803,6 @@ static int hisi_zip_pf_probe_init(struct hisi_qm *qm) return -EINVAL; } - qm->err_ini.get_dev_hw_err_status = hisi_zip_get_hw_err_status; - qm->err_ini.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status; - qm->err_ini.err_info.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; - qm->err_ini.err_info.ce = QM_BASE_CE; - qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT; - qm->err_ini.err_info.fe = 0; - qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; - qm->err_ini.err_info.acpi_rst = "ZRST"; - qm->err_ini.hw_err_disable = hisi_zip_hw_error_disable; - qm->err_ini.hw_err_enable = hisi_zip_hw_error_enable; - qm->err_ini.set_usr_domain_cache = hisi_zip_set_user_domain_and_cache; - qm->err_ini.log_dev_hw_err = hisi_zip_log_hw_error; - qm->err_ini.open_axi_master_ooo = hisi_zip_open_axi_master_ooo; - qm->err_ini.close_axi_master_ooo = hisi_zip_close_axi_master_ooo; - - qm->err_ini.err_info.msi_wr_port = HZIP_WR_PORT; - ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) return ret; @@ -822,6 +827,7 @@ static int hisi_zip_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->sqe_size = HZIP_SQE_SIZE; qm->dev_name = hisi_zip_name; qm->qm_list = &zip_devices; + hisi_zip_err_ini_set(qm); return 0; } -- 2.30.0

2 1

[PATCH OLK-5.10] ext4: do not mark inode dirty every time when appending using delalloc
by WoZ1zh1 20 Sep '23

20 Sep '23

From: Liu Song <liusong(a)linux.alibaba.com> mainline inclusion from mainline-v6.6-rc1 commit 03de20bed203b0819225d4de98353c1f8755a1dd category: perf bugzilla: https://gitee.com/openeuler/kernel/issues/I82QPS CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In the delalloc append write scenario, if inode's i_size is extended due to buffer write, there are delalloc writes pending in the range up to i_size, and no need to touch i_disksize since writeback will push i_disksize up to i_size eventually. Offers significant performance improvement in high-frequency append write scenarios. I conducted tests in my 32-core environment by launching 32 concurrent threads to append write to the same file. Each write operation had a length of 1024 bytes and was repeated 100000 times. Without using this patch, the test was completed in 7705 ms. However, with this patch, the test was completed in 5066 ms, resulting in a performance improvement of 34%. Moreover, in test scenarios of Kafka version 2.6.2, using packet size of 2K, with this patch resulted in a 10% performance improvement. Signed-off-by: Liu Song <liusong(a)linux.alibaba.com> Suggested-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20230810154333.84921-1-liusong@linux.alibaba.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: WoZ1zh1 <wozizhi(a)huawei.com> --- fs/ext4/inode.c | 88 ++++++++++++++++++++++++++++++++++--------------- 1 file changed, 62 insertions(+), 26 deletions(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index a61e7ab21a16..1b6e16702298 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -3080,14 +3080,73 @@ static int ext4_da_should_update_i_disksize(struct page *page, return 1; } +static int ext4_da_do_write_end(struct address_space *mapping, + loff_t pos, unsigned len, unsigned copied, + struct page *page) +{ + struct inode *inode = mapping->host; + loff_t old_size = inode->i_size; + bool disksize_changed = false; + loff_t new_i_size; + + /* + * block_write_end() will mark the inode as dirty with I_DIRTY_PAGES + * flag, which all that's needed to trigger page writeback. + */ + copied = block_write_end(NULL, mapping, pos, len, copied, page, NULL); + new_i_size = pos + copied; + + /* + * It's important to update i_size while still holding page lock, + * because page writeout could otherwise come in and zero beyond + * i_size. + * + * Since we are holding inode lock, we are sure i_disksize <= + * i_size. We also know that if i_disksize < i_size, there are + * delalloc writes pending in the range up to i_size. If the end of + * the current write is <= i_size, there's no need to touch + * i_disksize since writeback will push i_disksize up to i_size + * eventually. If the end of the current write is > i_size and + * inside an allocated block which ext4_da_should_update_i_disksize() + * checked, we need to update i_disksize here as certain + * ext4_writepages() paths not allocating blocks and update i_disksize. + */ + if (new_i_size > inode->i_size) { + unsigned long end; + + i_size_write(inode, new_i_size); + end = (new_i_size - 1) & (PAGE_SIZE - 1); + if (copied && ext4_da_should_update_i_disksize(page, end)) { + ext4_update_i_disksize(inode, new_i_size); + disksize_changed = true; + } + } + + unlock_page(page); + put_page(page); + + if (old_size < pos) + pagecache_isize_extended(inode, old_size, pos); + + if (disksize_changed) { + handle_t *handle; + + handle = ext4_journal_start(inode, EXT4_HT_INODE, 2); + if (IS_ERR(handle)) + return PTR_ERR(handle); + ext4_mark_inode_dirty(handle, inode); + ext4_journal_stop(handle); + } + + return copied; +} + static int ext4_da_write_end(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, struct page *page, void *fsdata) { struct inode *inode = mapping->host; - loff_t new_i_size; - unsigned long start, end; int write_mode = (int)(unsigned long)fsdata; if (write_mode == FALL_BACK_TO_NONDELALLOC) @@ -3104,30 +3163,7 @@ static int ext4_da_write_end(struct file *file, if (unlikely(copied < len) && !PageUptodate(page)) copied = 0; - start = pos & (PAGE_SIZE - 1); - end = start + copied - 1; - - /* - * Since we are holding inode lock, we are sure i_disksize <= - * i_size. We also know that if i_disksize < i_size, there are - * delalloc writes pending in the range upto i_size. If the end of - * the current write is <= i_size, there's no need to touch - * i_disksize since writeback will push i_disksize upto i_size - * eventually. If the end of the current write is > i_size and - * inside an allocated block (ext4_da_should_update_i_disksize() - * check), we need to update i_disksize here as neither - * ext4_writepage() nor certain ext4_writepages() paths not - * allocating blocks update i_disksize. - * - * Note that we defer inode dirtying to generic_write_end() / - * ext4_da_write_inline_data_end(). - */ - new_i_size = pos + copied; - if (copied && new_i_size > inode->i_size && - ext4_da_should_update_i_disksize(page, end)) - ext4_update_i_disksize(inode, new_i_size); - - return generic_write_end(file, mapping, pos, len, copied, page, fsdata); + return ext4_da_do_write_end(mapping, pos, len, copied, page); } /* -- 2.39.2

2 1

[PATCH openEuler-1.0-LTS] crypto: hisilicon - reset before init the device
by w00416078 20 Sep '23

20 Sep '23

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla:https://gitee.com/openeuler/kernel/issues/I830AI CVE: NA -------------------------------- Before initializing the device, reset the device to clear the residual data to prevent unexpected problems, such as reboot scene, which may maintain device state before reboot. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> --- drivers/crypto/hisilicon/hpre/hpre_main.c | 68 +++++++++++-------- drivers/crypto/hisilicon/qm.c | 83 ++++++++++++++++------- drivers/crypto/hisilicon/rde/rde_main.c | 64 ++++++++--------- drivers/crypto/hisilicon/sec2/sec_main.c | 39 ++++++----- drivers/crypto/hisilicon/zip/zip_main.c | 42 +++++++----- 5 files changed, 175 insertions(+), 121 deletions(-) diff --git a/drivers/crypto/hisilicon/hpre/hpre_main.c b/drivers/crypto/hisilicon/hpre/hpre_main.c index 1a980f255ad4..cbe8ea438fd2 100644 --- a/drivers/crypto/hisilicon/hpre/hpre_main.c +++ b/drivers/crypto/hisilicon/hpre/hpre_main.c @@ -780,28 +780,6 @@ static void hpre_debugfs_exit(struct hisi_qm *qm) debugfs_remove_recursive(qm->debug.debug_root); } -static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) -{ - int ret; - - qm->algs = "rsa\ndh\n"; - qm->uacce_mode = uacce_mode; - qm->pdev = pdev; - ret = hisi_qm_pre_init(qm, pf_q_num, HPRE_PF_DEF_Q_BASE); - if (ret) - return ret; - if (qm->ver == QM_HW_V1) { - pci_warn(pdev, "HPRE version 1 is not supported!\n"); - return -EINVAL; - } - - qm->qm_list = &hpre_devices; - qm->sqe_size = HPRE_SQE_SIZE; - qm->dev_name = hpre_name; - - return 0; -} - static void hpre_log_hw_error(struct hisi_qm *qm, u32 err_sts) { const struct hpre_hw_error *err = hpre_hw_errors; @@ -836,30 +814,36 @@ static void hpre_open_axi_master_ooo(struct hisi_qm *qm) HPRE_ADDR(qm, HPRE_AM_OOO_SHUTDOWN_ENB)); } -static int hpre_pf_probe_init(struct hisi_qm *qm) +static void hpre_err_ini_set(struct hisi_qm *qm) { - int ret; - - if (qm->ver != QM_HW_V2) - return -EINVAL; + if (qm->fun_type == QM_HW_VF) + return; - qm->ctrl_q_num = HPRE_QUEUE_NUM_V2; qm->err_ini.get_dev_hw_err_status = hpre_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = hpre_clear_hw_err_status; qm->err_ini.err_info.ecc_2bits_mask = HPRE_CORE_ECC_2BIT_ERR | - HPRE_OOO_ECC_2BIT_ERR; + HPRE_OOO_ECC_2BIT_ERR; qm->err_ini.err_info.ce = QM_BASE_CE; qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; qm->err_ini.err_info.fe = 0; qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; qm->err_ini.err_info.acpi_rst = "HRST"; - qm->err_ini.hw_err_disable = hpre_hw_error_disable; qm->err_ini.hw_err_enable = hpre_hw_error_enable; qm->err_ini.set_usr_domain_cache = hpre_set_user_domain_and_cache; qm->err_ini.log_dev_hw_err = hpre_log_hw_error; qm->err_ini.open_axi_master_ooo = hpre_open_axi_master_ooo; qm->err_ini.err_info.msi_wr_port = HPRE_WR_MSI_PORT; +} + +static int hpre_pf_probe_init(struct hisi_qm *qm) +{ + int ret; + + if (qm->ver != QM_HW_V2) + return -EINVAL; + + qm->ctrl_q_num = HPRE_QUEUE_NUM_V2; ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) @@ -870,6 +854,30 @@ static int hpre_pf_probe_init(struct hisi_qm *qm) return 0; } +static int hpre_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) +{ + int ret; + + qm->algs = "rsa\ndh\n"; + qm->uacce_mode = uacce_mode; + qm->pdev = pdev; + ret = hisi_qm_pre_init(qm, pf_q_num, HPRE_PF_DEF_Q_BASE); + if (ret) + return ret; + + if (qm->ver == QM_HW_V1) { + pci_warn(pdev, "HPRE version 1 is not supported!\n"); + return -EINVAL; + } + + qm->qm_list = &hpre_devices; + qm->sqe_size = HPRE_SQE_SIZE; + qm->dev_name = hpre_name; + hpre_err_ini_set(qm); + + return 0; +} + static int hpre_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct hisi_qm *qm; diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 739b1a6565fd..f2706dc0d55e 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -230,6 +230,7 @@ #define QMC_ALIGN(sz) ALIGN(sz, 32) static int __hisi_qm_start(struct hisi_qm *qm); +static int qm_reset_device(struct hisi_qm *qm); enum vft_type { SQC_VFT = 0, @@ -2584,6 +2585,30 @@ static int hisi_qm_memory_init(struct hisi_qm *qm) return ret; } +static int qm_clear_device(struct hisi_qm *qm) +{ + u32 val; + int ret; + + if (qm->fun_type == QM_HW_VF) + return 0; + + /* OOO register set and check */ + writel(MASTER_GLOBAL_CTRL_SHUTDOWN, qm->io_base + MASTER_GLOBAL_CTRL); + + ret = readl_relaxed_poll_timeout(qm->io_base + MASTER_TRANS_RETURN, + val, (val == MASTER_TRANS_RETURN_RW), + QM_REG_RD_INTVRL_US, + QM_REG_RD_TMOUT_US); + if (ret) { + pci_warn(qm->pdev, "Device is busy, can not clear device.\n"); + writel(0x0, qm->io_base + MASTER_GLOBAL_CTRL); + return ret; + } + + return qm_reset_device(qm); +} + static int hisi_qm_pci_init(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; @@ -2626,8 +2651,14 @@ static int hisi_qm_pci_init(struct hisi_qm *qm) goto err_set_mask_and_coherent; } + ret = qm_clear_device(qm); + if (ret) + goto err_free_vectors; + return 0; +err_free_vectors: + pci_free_irq_vectors(pdev); err_set_mask_and_coherent: devm_iounmap(dev, qm->io_base); err_ioremap: @@ -3808,6 +3839,34 @@ static void qm_dev_ecc_mbit_handle(struct hisi_qm *qm) } } +static int qm_reset_device(struct hisi_qm *qm) +{ + struct pci_dev *pdev = qm->pdev; + unsigned long long value = 0; + acpi_status s; + + /* The reset related sub-control registers are not in PCI BAR */ + if (ACPI_HANDLE(&pdev->dev)) { + s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), + qm->err_ini.err_info.acpi_rst, + NULL, &value); + if (ACPI_FAILURE(s)) { + pci_err(pdev, "NO controller reset method!\n"); + return -EIO; + } + + if (value) { + pci_err(pdev, "Reset step %llu failed!\n", value); + return -EIO; + } + + return 0; + } + + pci_err(pdev, "No reset method!\n"); + return -EINVAL; +} + static int qm_soft_reset(struct hisi_qm *qm) { struct pci_dev *pdev = qm->pdev; @@ -3853,29 +3912,7 @@ static int qm_soft_reset(struct hisi_qm *qm) return ret; } - /* The reset related sub-control registers are not in PCI BAR */ - if (ACPI_HANDLE(&pdev->dev)) { - unsigned long long value = 0; - acpi_status s; - - s = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - qm->err_ini.err_info.acpi_rst, - NULL, &value); - if (ACPI_FAILURE(s)) { - pci_err(pdev, "NO controller reset method!\n"); - return -EIO; - } - - if (value) { - pci_err(pdev, "Reset step %llu failed!\n", value); - return -EIO; - } - } else { - pci_err(pdev, "No reset method!\n"); - return -EINVAL; - } - - return 0; + return qm_reset_device(qm); } static int qm_vf_reset_done(struct pci_dev *pdev, diff --git a/drivers/crypto/hisilicon/rde/rde_main.c b/drivers/crypto/hisilicon/rde/rde_main.c index f3f70079aa77..f2e00ff891db 100644 --- a/drivers/crypto/hisilicon/rde/rde_main.c +++ b/drivers/crypto/hisilicon/rde/rde_main.c @@ -28,15 +28,8 @@ #define HRDE_QUEUE_NUM_V2 1024 #define HRDE_PCI_DEVICE_ID 0xa25a #define HRDE_SQE_SIZE 64 -#define HRDE_SQ_SIZE (HRDE_SQE_SIZE * QM_Q_DEPTH) #define HRDE_PF_DEF_Q_NUM 64 #define HRDE_PF_DEF_Q_BASE 0 -#define HRDE_RD_INTVRL_US 10 -#define HRDE_RD_TMOUT_US 1000 -#define HRDE_RST_TMOUT_MS 400 -#define HRDE_ENABLE 1 -#define HRDE_DISABLE 0 -#define HRDE_PCI_COMMAND_INVALID 0xFFFFFFFF #define HRDE_RAS_INT_MSK 0x310290 #define HRDE_RAS_CE_MSK BIT(2) @@ -101,7 +94,7 @@ static struct hisi_qm_list rde_devices; static void hisi_rde_ras_proc(struct work_struct *work); static const struct hisi_rde_hw_error rde_hw_error[] = { - {.int_msk = BIT(0), .msg = "Rde_ecc_1bitt_err"}, + {.int_msk = BIT(0), .msg = "Rde_ecc_1bit_err"}, {.int_msk = BIT(1), .msg = "Rde_ecc_2bit_err"}, {.int_msk = BIT(2), .msg = "Rde_stat_mgmt_state_timeout_err"}, {.int_msk = BIT(3), .msg = "Rde_data_wr_state_timeout_err"}, @@ -269,7 +262,7 @@ static int hisi_rde_set_user_domain_and_cache(struct hisi_qm *qm) writel(AXI_M_CFG, qm->io_base + QM_AXI_M_CFG); writel(AXI_M_CFG_ENABLE, qm->io_base + QM_AXI_M_CFG_ENABLE); - /* disable BME/PM/SRIOV FLR*/ + /* disable BME/PM/SRIOV FLR */ writel(PEH_AXUSER_CFG, qm->io_base + QM_PEH_AXUSER_CFG); writel(PEH_AXUSER_CFG_ENABLE, qm->io_base + QM_PEH_AXUSER_CFG_ENABLE); @@ -351,7 +344,7 @@ static int current_qm_write(struct ctrl_debug_file *file, u32 val) u32 tmp; if (val > 0) { - pr_err("Function id should be smaller than 0.\n"); + pr_err("Function id should be equal to 0.\n"); return -EINVAL; } @@ -423,7 +416,7 @@ static ssize_t ctrl_debug_write(struct file *filp, const char __user *buf, size_t count, loff_t *pos) { struct ctrl_debug_file *file = filp->private_data; - char tbuf[20]; + char tbuf[HRDE_DBGFS_VAL_MAX_LEN]; unsigned long val; int len, ret; @@ -623,6 +616,24 @@ static void hisi_rde_open_master_ooo(struct hisi_qm *qm) writel(val | HRDE_AXI_SHUTDOWN_EN, qm->io_base + HRDE_CFG); } +static void hisi_rde_err_ini_set(struct hisi_qm *qm) +{ + qm->err_ini.get_dev_hw_err_status = hisi_rde_get_hw_err_status; + qm->err_ini.clear_dev_hw_err_status = hisi_rde_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = 0; + qm->err_ini.err_info.acpi_rst = "RRST"; + qm->err_ini.hw_err_disable = hisi_rde_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_rde_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_rde_set_user_domain_and_cache; + qm->err_ini.log_dev_hw_err = hisi_rde_hw_error_log; + qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; + qm->err_ini.err_info.msi_wr_port = HRDE_WR_MSI_PORT; +} + static int hisi_rde_pf_probe_init(struct hisi_qm *qm) { struct hisi_rde *hisi_rde = container_of(qm, struct hisi_rde, qm); @@ -649,21 +660,6 @@ static int hisi_rde_pf_probe_init(struct hisi_qm *qm) return -EINVAL; } - qm->err_ini.get_dev_hw_err_status = hisi_rde_get_hw_err_status; - qm->err_ini.clear_dev_hw_err_status = hisi_rde_clear_hw_err_status; - qm->err_ini.err_info.ecc_2bits_mask = HRDE_ECC_2BIT_ERR; - qm->err_ini.err_info.ce = QM_BASE_CE; - qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT; - qm->err_ini.err_info.fe = 0; - qm->err_ini.err_info.msi = 0; - qm->err_ini.err_info.acpi_rst = "RRST"; - qm->err_ini.hw_err_disable = hisi_rde_hw_error_disable; - qm->err_ini.hw_err_enable = hisi_rde_hw_error_enable; - qm->err_ini.set_usr_domain_cache = hisi_rde_set_user_domain_and_cache; - qm->err_ini.log_dev_hw_err = hisi_rde_hw_error_log; - qm->err_ini.open_axi_master_ooo = hisi_rde_open_master_ooo; - qm->err_ini.err_info.msi_wr_port = HRDE_WR_MSI_PORT; - ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) return ret; @@ -690,6 +686,7 @@ static int hisi_rde_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->sqe_size = HRDE_SQE_SIZE; qm->dev_name = hisi_rde_name; qm->abnormal_fix = hisi_rde_abnormal_fix; + hisi_rde_err_ini_set(qm); return 0; } @@ -727,31 +724,31 @@ static int hisi_rde_probe(struct pci_dev *pdev, const struct pci_device_id *id) ret = hisi_rde_qm_pre_init(qm, pdev); if (ret) { - pci_err(pdev, "Pre init qm failed!\n"); + pci_err(pdev, "Failed to pre init qm!\n"); return ret; } ret = hisi_qm_init(qm); if (ret) { - pci_err(pdev, "Init qm failed!\n"); + pci_err(pdev, "Failed to init qm!\n"); return ret; } ret = hisi_rde_pf_probe_init(qm); if (ret) { - pci_err(pdev, "Init pf failed!\n"); + pci_err(pdev, "Failed to init pf!\n"); goto err_qm_uninit; } ret = hisi_qm_start(qm); if (ret) { - pci_err(pdev, "Start qm failed!\n"); + pci_err(pdev, "Failed to start qm!\n"); goto err_qm_uninit; } ret = hisi_rde_debugfs_init(qm); if (ret) - pci_warn(pdev, "Init debugfs failed!\n"); + pci_warn(pdev, "Failed to init debugfs!\n"); hisi_qm_add_to_list(qm, &rde_devices); @@ -793,8 +790,7 @@ static void hisi_rde_ras_proc(struct work_struct *work) ret = hisi_qm_process_dev_error(pdev); if (ret == PCI_ERS_RESULT_NEED_RESET) if (hisi_qm_controller_reset(&hisi_rde->qm)) - dev_err(&pdev->dev, "Hisi_rde reset fail.\n"); - + dev_err(&pdev->dev, "Failed to reset device!\n"); } int hisi_rde_abnormal_fix(struct hisi_qm *qm) @@ -850,7 +846,7 @@ static int __init hisi_rde_init(void) ret = pci_register_driver(&hisi_rde_pci_driver); if (ret < 0) { hisi_rde_unregister_debugfs(); - pr_err("Register pci driver failed.\n"); + pr_err("Failed to register pci driver!\n"); } return ret; diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index a568d5363c1e..0f32dcb69e12 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -712,29 +712,17 @@ static void sec_open_axi_master_ooo(struct hisi_qm *qm) writel(val | SEC_AXI_SHUTDOWN_ENABLE, SEC_ADDR(qm, SEC_CONTROL_REG)); } -static int sec_pf_probe_init(struct hisi_qm *qm) +static void sec_err_ini_set(struct hisi_qm *qm) { - int ret; - - switch (qm->ver) { - case QM_HW_V1: - qm->ctrl_q_num = SEC_QUEUE_NUM_V1; - break; - - case QM_HW_V2: - qm->ctrl_q_num = SEC_QUEUE_NUM_V2; - break; - - default: - return -EINVAL; - } + if (qm->fun_type == QM_HW_VF) + return; qm->err_ini.get_dev_hw_err_status = sec_get_hw_err_status; qm->err_ini.clear_dev_hw_err_status = sec_clear_hw_err_status; qm->err_ini.err_info.ecc_2bits_mask = SEC_CORE_INT_STATUS_M_ECC; qm->err_ini.err_info.ce = QM_BASE_CE; qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_DO_TASK_TIMEOUT | - QM_ACC_WB_NOT_READY_TIMEOUT; + QM_ACC_WB_NOT_READY_TIMEOUT; qm->err_ini.err_info.fe = 0; qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; qm->err_ini.err_info.acpi_rst = "SRST"; @@ -744,6 +732,24 @@ static int sec_pf_probe_init(struct hisi_qm *qm) qm->err_ini.log_dev_hw_err = sec_log_hw_error; qm->err_ini.open_axi_master_ooo = sec_open_axi_master_ooo; qm->err_ini.err_info.msi_wr_port = SEC_WR_MSI_PORT; +} + +static int sec_pf_probe_init(struct hisi_qm *qm) +{ + int ret; + + switch (qm->ver) { + case QM_HW_V1: + qm->ctrl_q_num = SEC_QUEUE_NUM_V1; + break; + + case QM_HW_V2: + qm->ctrl_q_num = SEC_QUEUE_NUM_V2; + break; + + default: + return -EINVAL; + } ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) @@ -807,6 +813,7 @@ static int sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->qm_list = &sec_devices; qm->sqe_size = SEC_SQE_SIZE; qm->dev_name = sec_name; + sec_err_ini_set(qm); return 0; } diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index 17bbab667553..1ca51793e26a 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -204,7 +204,7 @@ static struct debugfs_reg32 hzip_dfx_regs[] = { {"HZIP_AVG_DELAY ", 0x28ull}, {"HZIP_MEM_VISIBLE_DATA ", 0x30ull}, {"HZIP_MEM_VISIBLE_ADDR ", 0x34ull}, - {"HZIP_COMSUMED_BYTE ", 0x38ull}, + {"HZIP_CONSUMED_BYTE ", 0x38ull}, {"HZIP_PRODUCED_BYTE ", 0x40ull}, {"HZIP_COMP_INF ", 0x70ull}, {"HZIP_PRE_OUT ", 0x78ull}, @@ -755,6 +755,28 @@ static void hisi_zip_close_axi_master_ooo(struct hisi_qm *qm) qm->io_base + HZIP_CORE_INT_SET); } +static void hisi_zip_err_ini_set(struct hisi_qm *qm) +{ + if (qm->fun_type == QM_HW_VF) + return; + + qm->err_ini.get_dev_hw_err_status = hisi_zip_get_hw_err_status; + qm->err_ini.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status; + qm->err_ini.err_info.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; + qm->err_ini.err_info.ce = QM_BASE_CE; + qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT; + qm->err_ini.err_info.fe = 0; + qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; + qm->err_ini.err_info.acpi_rst = "ZRST"; + qm->err_ini.hw_err_disable = hisi_zip_hw_error_disable; + qm->err_ini.hw_err_enable = hisi_zip_hw_error_enable; + qm->err_ini.set_usr_domain_cache = hisi_zip_set_user_domain_and_cache; + qm->err_ini.log_dev_hw_err = hisi_zip_log_hw_error; + qm->err_ini.open_axi_master_ooo = hisi_zip_open_axi_master_ooo; + qm->err_ini.close_axi_master_ooo = hisi_zip_close_axi_master_ooo; + qm->err_ini.err_info.msi_wr_port = HZIP_WR_PORT; +} + static int hisi_zip_pf_probe_init(struct hisi_qm *qm) { struct hisi_zip *zip = container_of(qm, struct hisi_zip, qm); @@ -781,23 +803,6 @@ static int hisi_zip_pf_probe_init(struct hisi_qm *qm) return -EINVAL; } - qm->err_ini.get_dev_hw_err_status = hisi_zip_get_hw_err_status; - qm->err_ini.clear_dev_hw_err_status = hisi_zip_clear_hw_err_status; - qm->err_ini.err_info.ecc_2bits_mask = HZIP_CORE_INT_STATUS_M_ECC; - qm->err_ini.err_info.ce = QM_BASE_CE; - qm->err_ini.err_info.nfe = QM_BASE_NFE | QM_ACC_WB_NOT_READY_TIMEOUT; - qm->err_ini.err_info.fe = 0; - qm->err_ini.err_info.msi = QM_DB_RANDOM_INVALID; - qm->err_ini.err_info.acpi_rst = "ZRST"; - qm->err_ini.hw_err_disable = hisi_zip_hw_error_disable; - qm->err_ini.hw_err_enable = hisi_zip_hw_error_enable; - qm->err_ini.set_usr_domain_cache = hisi_zip_set_user_domain_and_cache; - qm->err_ini.log_dev_hw_err = hisi_zip_log_hw_error; - qm->err_ini.open_axi_master_ooo = hisi_zip_open_axi_master_ooo; - qm->err_ini.close_axi_master_ooo = hisi_zip_close_axi_master_ooo; - - qm->err_ini.err_info.msi_wr_port = HZIP_WR_PORT; - ret = qm->err_ini.set_usr_domain_cache(qm); if (ret) return ret; @@ -822,6 +827,7 @@ static int hisi_zip_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) qm->sqe_size = HZIP_SQE_SIZE; qm->dev_name = hisi_zip_name; qm->qm_list = &zip_devices; + hisi_zip_err_ini_set(qm); return 0; } -- 2.30.0

2 1

[PATCH v2 openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Hongchen Zhang (7): LoongArch: Allow usage of LSX/LASX in the kernel spi: loongson: add bus driver for the loongson spi controller drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() drm/loongson: Add a check for lsdc_bo_create() errors LoongArch: mm: Add p?d_leaf() definitions LoongArch: Fix module relocation error with binutils 2.41 MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 42 files changed, 7007 insertions(+), 4 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

2 8

[PATCH openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

2 8

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

2 9

openEuler Kernel SIG双周例会
by openEuler conference 20 Sep '23

20 Sep '23

您好！ Kernel SIG 邀请您参加 2023-09-22 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中新增议题可直接回复邮件申请，或录入会议看板会议链接：https://us06web.zoom.us/j/83542407044?pwd=UYtASnHgeP3bOAEaO9OCyMaPdQc6iA.1 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-09-22 14:00, The subject of the conference is openEuler Kernel SIG双周例会, Summary: 1. 进展update 2. 议题征集中新增议题可直接回复邮件申请，或录入会议看板 You can join the meeting at https://us06web.zoom.us/j/83542407044?pwd=UYtASnHgeP3bOAEaO9OCyMaPdQc6iA.1. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

1 7

[PATCH v4 openEuler-23.09 0/3] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 20 Sep '23

20 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (3): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed remote_pager: delete unused file drivers/remote_pager/Kconfig | 9 + drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 111 ++------ drivers/remote_pager/swap/device/ksymbol.c | 83 ------ drivers/remote_pager/swap/device/ksymbol.h | 35 --- .../remote_pager/swap/device/swap_manager.c | 256 ------------------ .../remote_pager/swap/device/swap_manager.h | 28 -- .../swap/device/swap_policy/policy_list_lru.c | 108 -------- .../swap/device/swap_policy/swap_policy.h | 16 -- mm/mmap.c | 1 + 11 files changed, 33 insertions(+), 622 deletions(-) delete mode 100644 drivers/remote_pager/swap/device/ksymbol.c delete mode 100644 drivers/remote_pager/swap/device/ksymbol.h delete mode 100644 drivers/remote_pager/swap/device/swap_manager.c delete mode 100644 drivers/remote_pager/swap/device/swap_manager.h delete mode 100644 drivers/remote_pager/swap/device/swap_policy/policy_list_lru.c delete mode 100644 drivers/remote_pager/swap/device/swap_policy/swap_policy.h -- 2.25.1

2 4

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

1 2

2024

2023

2022

2021

2020

2019

Kernel