- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] iommu/arm-smmu-v3: Add suspend and resume support
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Bixuan Cui <cuibixuan(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4DZ7Q CVE: NA ------------------------------------------------------- Add suspend and resume support for smmuv3. The smmu is stopped when suspending and started when resuming. Signed-off-by: Bixuan Cui <cuibixuan(a)huawei.com> Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/arm-smmu-v3.c | 98 +++++++++++++++++++++++++++++++++---- 1 file changed, 88 insertions(+), 10 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 560980c54014a..12d503bb3b1e0 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -693,6 +693,7 @@ struct arm_smmu_device { unsigned int mpam_partid_max; unsigned int mpam_pmg_max; + bool bypass; }; struct arm_smmu_stream { @@ -3455,6 +3456,13 @@ static void arm_smmu_write_msi_msg(struct msi_desc *desc, struct msi_msg *msg) doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo; doorbell &= MSI_CFG0_ADDR_MASK; +#ifdef CONFIG_PM_SLEEP + /* Saves the msg (base addr of msi irq) and restores it during resume */ + desc->msg.address_lo = msg->address_lo; + desc->msg.address_hi = msg->address_hi; + desc->msg.data = msg->data; +#endif + writeq_relaxed(doorbell, smmu->base + cfg[0]); writel_relaxed(msg->data, smmu->base + cfg[1]); writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, smmu->base + cfg[2]); @@ -3510,6 +3518,40 @@ static void arm_smmu_setup_msis(struct arm_smmu_device *smmu) devm_add_action(dev, arm_smmu_free_msis, dev); } +#ifdef CONFIG_PM_SLEEP +static void arm_smmu_resume_msis(struct arm_smmu_device *smmu) +{ + struct msi_desc *desc; + struct device *dev = smmu->dev; + + for_each_msi_entry(desc, dev) { + switch (desc->platform.msi_index) { + case EVTQ_MSI_INDEX: + case GERROR_MSI_INDEX: + case PRIQ_MSI_INDEX: { + phys_addr_t *cfg = arm_smmu_msi_cfg[desc->platform.msi_index]; + struct msi_msg *msg = &desc->msg; + phys_addr_t doorbell = (((u64)msg->address_hi) << 32) | msg->address_lo; + + doorbell &= MSI_CFG0_ADDR_MASK; + writeq_relaxed(doorbell, smmu->base + cfg[0]); + writel_relaxed(msg->data, smmu->base + cfg[1]); + writel_relaxed(ARM_SMMU_MEMATTR_DEVICE_nGnRE, + smmu->base + cfg[2]); + break; + } + default: + continue; + + } + } +} +#else +static void arm_smmu_resume_msis(struct arm_smmu_device *smmu) +{ +} +#endif + static void arm_smmu_setup_message_based_spi(struct arm_smmu_device *smmu) { struct irq_desc *desc; @@ -3541,11 +3583,17 @@ static void arm_smmu_setup_message_based_spi(struct arm_smmu_device *smmu) } } -static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu) +static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu, bool resume) { int irq, ret; - arm_smmu_setup_msis(smmu); + if (!resume) + arm_smmu_setup_msis(smmu); + else { + /* The irq doesn't need to be re-requested during resume */ + arm_smmu_resume_msis(smmu); + return; + } /* Request interrupt lines */ irq = smmu->evtq.q.irq; @@ -3587,7 +3635,7 @@ static void arm_smmu_setup_unique_irqs(struct arm_smmu_device *smmu) } } -static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu) +static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu, bool resume) { int ret, irq; u32 irqen_flags = IRQ_CTRL_EVTQ_IRQEN | IRQ_CTRL_GERROR_IRQEN; @@ -3614,7 +3662,7 @@ static int arm_smmu_setup_irqs(struct arm_smmu_device *smmu) if (ret < 0) dev_warn(smmu->dev, "failed to enable combined irq\n"); } else - arm_smmu_setup_unique_irqs(smmu); + arm_smmu_setup_unique_irqs(smmu, resume); if (smmu->features & ARM_SMMU_FEAT_PRI) irqen_flags |= IRQ_CTRL_PRIQ_IRQEN; @@ -3642,7 +3690,7 @@ static int arm_smmu_device_disable(struct arm_smmu_device *smmu) return ret; } -static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass) +static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool resume) { int ret; u32 reg, enables; @@ -3747,7 +3795,7 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass) } } - ret = arm_smmu_setup_irqs(smmu); + ret = arm_smmu_setup_irqs(smmu, resume); if (ret) { dev_err(smmu->dev, "failed to setup irqs\n"); return ret; @@ -3757,7 +3805,7 @@ static int arm_smmu_device_reset(struct arm_smmu_device *smmu, bool bypass) enables &= ~(CR0_EVTQEN | CR0_PRIQEN); /* Enable the SMMU interface, or ensure bypass */ - if (!bypass || disable_bypass) { + if (!smmu->bypass || disable_bypass) { enables |= CR0_SMMUEN; } else { ret = arm_smmu_update_gbpa(smmu, 0, GBPA_ABORT); @@ -4383,6 +4431,26 @@ int arm_smmu_get_dev_user_mpam_en(struct device *dev, int *user_mpam_en) } EXPORT_SYMBOL(arm_smmu_get_dev_user_mpam_en); +#ifdef CONFIG_PM_SLEEP +static int arm_smmu_suspend(struct device *dev) +{ + /* + * The smmu is powered off and related registers are automatically + * cleared when suspend. No need to do anything. + */ + return 0; +} + +static int arm_smmu_resume(struct device *dev) +{ + struct arm_smmu_device *smmu = dev_get_drvdata(dev); + + arm_smmu_device_reset(smmu, true); + + return 0; +} +#endif + static int arm_smmu_device_probe(struct platform_device *pdev) { int irq, ret; @@ -4390,7 +4458,6 @@ static int arm_smmu_device_probe(struct platform_device *pdev) resource_size_t ioaddr; struct arm_smmu_device *smmu; struct device *dev = &pdev->dev; - bool bypass; smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL); if (!smmu) { @@ -4408,7 +4475,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev) } /* Set bypass mode according to firmware probing result */ - bypass = !!ret; + smmu->bypass = !!ret; /* Base address */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -4454,7 +4521,7 @@ static int arm_smmu_device_probe(struct platform_device *pdev) platform_set_drvdata(pdev, smmu); /* Reset the device */ - ret = arm_smmu_device_reset(smmu, bypass); + ret = arm_smmu_device_reset(smmu, false); if (ret) return ret; @@ -4527,11 +4594,22 @@ static const struct of_device_id arm_smmu_of_match[] = { }; MODULE_DEVICE_TABLE(of, arm_smmu_of_match); +#ifdef CONFIG_PM_SLEEP +static const struct dev_pm_ops arm_smmu_pm_ops = { + .suspend = arm_smmu_suspend, + .resume = arm_smmu_resume, +}; +#define ARM_SMMU_PM_OPS (&arm_smmu_pm_ops) +#else +#define ARM_SMMU_PM_OPS NULL +#endif + static struct platform_driver arm_smmu_driver = { .driver = { .name = "arm-smmu-v3", .of_match_table = of_match_ptr(arm_smmu_of_match), .suppress_bind_attrs = true, + .pm = ARM_SMMU_PM_OPS, }, .probe = arm_smmu_device_probe, .remove = arm_smmu_device_remove, -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/2] scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v5.16 commit 4e3ace0051e7e504b55d239daab8789dd89b863c category: bugfix bugzilla: 176010 CVE: NA ----------------------------------------------- The following warning was observed running syzkaller: [ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in; [ 3813.830724] program syz-executor not setting count and/or reply_len properly [ 3813.836956] ================================================================== [ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0 [ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549 [ 3813.846612] Call Trace: [ 3813.846995] dump_stack+0x108/0x15f [ 3813.847524] print_address_description+0xa5/0x372 [ 3813.848243] kasan_report.cold+0x236/0x2a8 [ 3813.849439] check_memory_region+0x240/0x270 [ 3813.850094] memcpy+0x30/0x80 [ 3813.850553] sg_copy_buffer+0x157/0x1e0 [ 3813.853032] sg_copy_from_buffer+0x13/0x20 [ 3813.853660] fill_from_dev_buffer+0x135/0x370 [ 3813.854329] resp_readcap16+0x1ac/0x280 [ 3813.856917] schedule_resp+0x41f/0x1630 [ 3813.858203] scsi_debug_queuecommand+0xb32/0x17e0 [ 3813.862699] scsi_dispatch_cmd+0x330/0x950 [ 3813.863329] scsi_request_fn+0xd8e/0x1710 [ 3813.863946] __blk_run_queue+0x10b/0x230 [ 3813.864544] blk_execute_rq_nowait+0x1d8/0x400 [ 3813.865220] sg_common_write.isra.0+0xe61/0x2420 [ 3813.871637] sg_write+0x6c8/0xef0 [ 3813.878853] __vfs_write+0xe4/0x800 [ 3813.883487] vfs_write+0x17b/0x530 [ 3813.884008] ksys_write+0x103/0x270 [ 3813.886268] __x64_sys_write+0x77/0xc0 [ 3813.886841] do_syscall_64+0x106/0x360 [ 3813.887415] entry_SYSCALL_64_after_hwframe+0x44/0xa9 This issue can be reproduced with the following syzkaller log: r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0) r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00') open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000) r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782) write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126) In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This leads to OOB in sg_copy_buffer(). To solve this issue, define alloc_len as u32. Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com Acked-by: Douglas Gilbert <dgilbert(a)interlog.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> conflicts: drivers/scsi/scsi_debug.c Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/scsi_debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/scsi_debug.c b/drivers/scsi/scsi_debug.c index 082b2695e02f3..d8befc6fbec9c 100644 --- a/drivers/scsi/scsi_debug.c +++ b/drivers/scsi/scsi_debug.c @@ -1665,7 +1665,7 @@ static int resp_readcap16(struct scsi_cmnd *scp, { unsigned char *cmd = scp->cmnd; unsigned char arr[SDEBUG_READCAP16_ARR_SZ]; - int alloc_len; + u32 alloc_len; alloc_len = get_unaligned_be32(cmd + 10); /* following just in case virtual_gb changed */ @@ -1694,7 +1694,7 @@ static int resp_readcap16(struct scsi_cmnd *scp, } return fill_from_dev_buffer(scp, arr, - min(alloc_len, SDEBUG_READCAP16_ARR_SZ)); + min_t(u32, alloc_len, SDEBUG_READCAP16_ARR_SZ)); } #define SDEBUG_MAX_TGTPGS_ARR_SZ 1412 -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS V2] README: README optimize
by Laibin Qiu 01 Nov '21

01 Nov '21

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> --- README | 226 ---------------------------------------- README.md | 237 ++++++++++++++++++++++++++++++++++++++++++ scripts/checkpatch.pl | 2 +- 3 files changed, 238 insertions(+), 227 deletions(-) delete mode 100644 README create mode 100644 README.md diff --git a/README b/README deleted file mode 100644 index 46c9ea352..000000000 --- a/README +++ /dev/null @@ -1,226 +0,0 @@ -Contributions to openEuler kernel project -========================================= - -Sign CLA --------- - -Before submitting any Contributions to openEuler, you have to sign CLA. - -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html - -Steps of submitting patches ---------------------------- - -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. - - Using scripts/checkpatch.pl to make sure there's no coding style issue. - - And make sure your patch follow unified openEuler patch format describe - below. - -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: - - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all - - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. - - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email - -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. - - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 - - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching - -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. - -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. - - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html - - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: - - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - - By making a contribution to this project, I certify that: - - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or - - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or - - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. - - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. - - then you just add a line saying: - - Signed-off-by: Random J Developer <random(a)developer.example.org> - - using your real name (sorry, no pseudonyms or anonymous contributions.) - -Use unified patch format ------------------------- - -Reasons: - -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. - -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. - -3. easy for script parsing - Keyword highlighting is necessary for script parsing. - -Patch format definition ------------------------ - -[M] stands for "mandatory" -[O] stands for "option" -$category can be: bug preparation, bugfix, perf, feature, doc, other... - -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) - -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id - -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem - -The detail information is very useful for porting patch to another kenrel branch. - -Example for mainline patch: - - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] - - additional changelog [O] - - -------------------------------- - - original changelog - - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] - - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) - -Examples --------- - -mainline inclusion -from mainline-4.10 -commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 -category: bugfix -bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . - -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... - -------------------------------------------------- - -original changelog - -<original S-O-B> -Signed-off-by: Zhang San <zhangsan(a)huawei.com> -Tested-by: Li Si <lisi(a)huawei.com> - -Email Client - Thunderbird Settings ------------------------------------ - -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. - -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 - - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ - -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". - - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. - - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap - -Linux kernel -============ - -There are several guides for kernel developers and users. These guides can -be rendered in a number of formats, like HTML and PDF. Please read -Documentation/admin-guide/README.rst first. - -In order to build the documentation, use ``make htmldocs`` or -``make pdfdocs``. The formatted documentation can also be read online at: - - https://www.kernel.org/doc/html/latest/ - -There are various text files in the Documentation/ subdirectory, -several of them using the Restructured Text markup notation. -See Documentation/00-INDEX for a list of what is contained in each file. - -Please read the Documentation/process/changes.rst file, as it contains the -requirements for building and running the kernel, and information about -the problems which may result by upgrading your kernel. diff --git a/README.md b/README.md new file mode 100644 index 000000000..3374c4726 --- /dev/null +++ b/README.md @@ -0,0 +1,237 @@ +# How to Contribute +------- + +- [How to Contribute](#How to Contribute) + + \- [Sign the CLA](#Sign the CLA) + + \- [Steps of submitting patches](#Steps of submitting patches) + + \- [Use the unified patch format](#Use the unified patch format) + + \- [Define the patch format](#Define the patch format) + + \- [Examples](#Examples) + + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) + +- [Linux kernel](#Linux kernel) + +### Sign the CLA + +------- + +Before making any contributions to openEuler, sign the CLA first. + +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) + +### Steps of submitting patches +------- + +**Step 1** Compile and test your patches. + +**Step 2** Generate patches. + +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. + +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. + +In addition, ensure that your patches comply with the unified openEuler patch format described below. + +**Step 3** Send your patches to the openEuler mailing list. + +To do so, run the following command: + + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` + +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. + +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. + +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. + +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. + + `git format-patch --subject-prefix="PATCH v2" -1` + +Subject examples: + + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- + +Reasons: + +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade + + We definitely will upgrade our openEuler kernel in someday, so strict patch management + + will alleviate the pain to migrate patches during big upgrades. + +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". + +$category can be: bug preparation, bugfix, perf, feature, doc, other... + +If category is feature, we need to add a feature name as below: + +```cpp +category: feature +feature: YYY (the feature name) +``` + +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): + +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` + +Additional changelog should include at least one of the following: + +1. Why we should apply this patch + +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: + +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] + +additional changelog [O] + +-------------------------------- + +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` + +### Examples +------- + +```cpp +mainline inclusion +from mainline-4.10 +commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 +category: bugfix +bugzilla: 3004 +CVE: N/A + +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP + +------------------------------------------------- + +original changelog + +<original S-O-B> +Signed-off-by: Zhang San <zhangsan(a)huawei.com> +Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. + + 2.2 Editor settings + + **Tools > Options> Advanced > Config editor** + + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. + + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. + + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. + + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. + + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. + +# Linux kernel +------- + +There are several guides for kernel developers and users, which can be rendered in a number of formats, like HTML and PDF. You can read **Documentation/admin-guide/README.rst** first. + +In order to build the documentation, use **make htmldocs** or **make pdfdocs**. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ + +There are various text files in the Documentation/ subdirectory, several of which use the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. + +Read the **Documentation/process/changes.rst** file, as it contains the requirements for building and running the kernel, and information about the problems that may be caused by upgrading your kernel. + diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 161b0224d..d9a8ae4da 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -1063,7 +1063,7 @@ sub top_of_kernel_tree { my @tree_check = ( "COPYING", "CREDITS", "Kbuild", "MAINTAINERS", "Makefile", - "README", "Documentation", "arch", "include", "drivers", + "README.md", "Documentation", "arch", "include", "drivers", "fs", "init", "ipc", "kernel", "lib", "scripts", ); -- 2.22.0

1 0

[PATCH openEuler-1.0-LTS] scsi: hisi_sas: unsupported DIX between OS and HBA only for SATA device
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Yang Xingui <yangxingui(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA Signed-off-by: Yang Xingui <yangxingui(a)huawei.com> Reviewed-by: Ouyangdelong <ouyangdelong(a)huawei.com> Reviewed-by: Kangfenglong <kangfenglong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas.h | 10 ++++++++++ drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 7 ++++++- 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas.h b/drivers/scsi/hisi_sas/hisi_sas.h index 3fd32606ecb00..8e9424e62a150 100644 --- a/drivers/scsi/hisi_sas/hisi_sas.h +++ b/drivers/scsi/hisi_sas/hisi_sas.h @@ -77,6 +77,16 @@ #define HISI_SAS_SATA_PROTOCOL_FPDMA 0x8 #define HISI_SAS_SATA_PROTOCOL_ATAPI 0x10 +#define HISI_SAS_DIF_PROT_MASK (SHOST_DIF_TYPE1_PROTECTION | \ + SHOST_DIF_TYPE2_PROTECTION | \ + SHOST_DIF_TYPE3_PROTECTION) + +#define HISI_SAS_DIX_PROT_MASK (SHOST_DIX_TYPE1_PROTECTION | \ + SHOST_DIX_TYPE2_PROTECTION | \ + SHOST_DIX_TYPE3_PROTECTION) + +#define HISI_SAS_PROT_MASK (HISI_SAS_DIF_PROT_MASK | HISI_SAS_DIX_PROT_MASK) + #define CLEAR_ITCT_TIMEOUT 20 struct hisi_hba; diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 0e4cc16e542d6..9d6e21be35841 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -3357,9 +3357,14 @@ hisi_sas_shost_alloc_pci(struct pci_dev *pdev) hisi_hba->dev = dev; hisi_hba->shost = shost; SHOST_TO_SAS_HA(shost) = &hisi_hba->sha; - hisi_hba->enable_dix_dif = enable_dix_dif; hisi_hba->user_ctl_irq = user_ctl_irq; + if (enable_dix_dif & ~HISI_SAS_PROT_MASK) + dev_err(dev, "unsupported protection mask 0x%x, using default (0x0)\n", + enable_dix_dif); + else + hisi_hba->enable_dix_dif = enable_dix_dif; + timer_setup(&hisi_hba->timer, NULL, 0); if (hisi_sas_get_fw_info(hisi_hba) < 0) -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 01/19] nbd: don't handle response without a corresponding request message
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-next-20211018 commit b5644a3a79bf3be5f1238db1b2f241374b27b0f0 category: bugfix bugzilla: 49890 CVE: NA --------------------------- While handling a response message from server, nbd_read_stat() will try to get request by tag, and then complete the request. However, this is problematic if nbd haven't sent a corresponding request message: t1 t2 submit_bio nbd_queue_rq blk_mq_start_request recv_work nbd_read_stat blk_mq_tag_to_rq blk_mq_complete_request nbd_send_cmd Thus add a new cmd flag 'NBD_CMD_INFLIGHT', it will be set in nbd_send_cmd() and checked in nbd_read_stat(). Noted that this patch can't fix that blk_mq_tag_to_rq() might return a freed request, and this will be fixed in following patches. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Reviewed-by: Josef Bacik <josef(a)toxicpanda.com> Link: https://lore.kernel.org/r/20210916093350.1410403-2-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/nbd.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 6a72c07ce3cba..05153b84d5400 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -120,6 +120,12 @@ struct nbd_device { }; #define NBD_CMD_REQUEUED 1 +/* + * This flag will be set if nbd_queue_rq() succeed, and will be checked and + * cleared in completion. Both setting and clearing of the flag are protected + * by cmd->lock. + */ +#define NBD_CMD_INFLIGHT 2 struct nbd_cmd { struct nbd_device *nbd; @@ -369,6 +375,7 @@ static enum blk_eh_timer_return nbd_xmit_timeout(struct request *req, if (!mutex_trylock(&cmd->lock)) return BLK_EH_RESET_TIMER; + __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags); if (!refcount_inc_not_zero(&nbd->config_refs)) { cmd->status = BLK_STS_TIMEOUT; mutex_unlock(&cmd->lock); @@ -674,6 +681,12 @@ static struct nbd_cmd *nbd_read_stat(struct nbd_device *nbd, int index) cmd = blk_mq_rq_to_pdu(req); mutex_lock(&cmd->lock); + if (!__test_and_clear_bit(NBD_CMD_INFLIGHT, &cmd->flags)) { + dev_err(disk_to_dev(nbd->disk), "Suspicious reply %d (status %u flags %lu)", + tag, cmd->status, cmd->flags); + ret = -ENOENT; + goto out; + } if (cmd->cmd_cookie != nbd_handle_to_cookie(handle)) { dev_err(disk_to_dev(nbd->disk), "Double reply on req %p, cmd_cookie %u, handle cookie %u\n", req, cmd->cmd_cookie, nbd_handle_to_cookie(handle)); @@ -768,6 +781,7 @@ static void nbd_clear_req(struct request *req, void *data, bool reserved) struct nbd_cmd *cmd = blk_mq_rq_to_pdu(req); mutex_lock(&cmd->lock); + __clear_bit(NBD_CMD_INFLIGHT, &cmd->flags); cmd->status = BLK_STS_IOERR; mutex_unlock(&cmd->lock); @@ -903,7 +917,13 @@ static int nbd_handle_cmd(struct nbd_cmd *cmd, int index) * returns EAGAIN can be retried on a different socket. */ ret = nbd_send_cmd(nbd, cmd, index); - if (ret == -EAGAIN) { + /* + * Access to this flag is protected by cmd->lock, thus it's safe to set + * the flag after nbd_send_cmd() succeed to send request to server. + */ + if (!ret) + __set_bit(NBD_CMD_INFLIGHT, &cmd->flags); + else if (ret == -EAGAIN) { dev_err_ratelimited(disk_to_dev(nbd->disk), "Request send failed, requeueing\n"); nbd_mark_nsock_dead(nbd, nsock, 1); -- 2.25.1

1 18

[PATCH openEuler-1.0-LTS 1/5] numa: Move the management structures for cdm nodes to ddr
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Wang Wensheng <wangwensheng4(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4D63I CVE: NA ------------------------------------------------- The cdm nodes are easiler to raise an ECC error and it may cause the kernel crash if the essential structures went wrong. So move the management structures for hbm nodes to the ddr nodes of the same partion to reduce the probability of kernel crashes. Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/Kconfig | 10 ++++++++ arch/arm64/mm/numa.c | 54 +++++++++++++++++++++++++++++++++++++++- include/linux/nodemask.h | 7 ++++++ mm/sparse.c | 8 +++--- 4 files changed, 75 insertions(+), 4 deletions(-) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 9d49b9524e1d4..2f34aef79179e 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -1470,6 +1470,16 @@ config ASCEND_SHARE_POOL help This feature allows multiple processes to share virtual memory both in kernel and user level, which is only enabled for ascend platform. + +config ASCEND_CLEAN_CDM + bool "move the management structure for HBM to DDR" + def_bool n + depends on COHERENT_DEVICE + help + The cdm nodes sometimes are easiler to raise an ECC error and it may + cause the kernel crash if the essential structures went wrong. So move + the management structures for hbm nodes to the ddr nodes of the same + partion to reduce the probability of kernel crashes. endif endmenu diff --git a/arch/arm64/mm/numa.c b/arch/arm64/mm/numa.c index a9d3ad5ee0cc3..a194bad6fdfcf 100644 --- a/arch/arm64/mm/numa.c +++ b/arch/arm64/mm/numa.c @@ -45,6 +45,57 @@ inline int arch_check_node_cdm(int nid) return node_isset(nid, cdmmask); } +#ifdef CONFIG_ASCEND_CLEAN_CDM +/** + * cdm_node_to_ddr_node - Convert the cdm node to the ddr node of the + * same partion. + * @nid: input node ID + * + * Here is a typical memory topology in usage. + * There are some DDR and HBM in each partion and DDRs present at first, then + * come all the HBMs of the first partion, then HBMs of the second partion, etc. + * + * ------------------------- + * | P0 | P1 | + * ----------- | ----------- + * |node0 DDR| | |node1 DDR| + * |---------- | ----------| + * |node2 HBM| | |node4 HBM| + * |---------- | ----------| + * |node3 HBM| | |node5 HBM| + * ----------- | ----------- + * + * Return: + * This function returns a ddr node which is of the same partion with the input + * node if the input node is a HBM node. + * The input nid is returned if it is a DDR node or if the memory topology of + * the system doesn't apply to the above model. + */ +int __init cdm_node_to_ddr_node(int nid) +{ + nodemask_t ddr_mask; + int nr_ddr, cdm_per_part, fake_nid; + int nr_cdm = nodes_weight(cdmmask); + + if (!nr_cdm || nodes_empty(numa_nodes_parsed)) + return nid; + + if (!node_isset(nid, cdmmask)) + return nid; + + nodes_xor(ddr_mask, cdmmask, numa_nodes_parsed); + nr_ddr = nodes_weight(ddr_mask); + cdm_per_part = nr_cdm / nr_ddr ? : 1; + + fake_nid = (nid - nr_ddr) / cdm_per_part; + fake_nid = !node_isset(fake_nid, cdmmask) ? fake_nid : nid; + + pr_info("nid: %d, fake_nid: %d\n", nid, fake_nid); + + return fake_nid; +} +#endif + static int __init cdm_nodes_setup(char *s) { int nid; @@ -264,11 +315,12 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn) u64 nd_pa; void *nd; int tnid; + int fake_nid = cdm_node_to_ddr_node(nid); if (start_pfn >= end_pfn) pr_info("Initmem setup node %d [<memory-less node>]\n", nid); - nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid); + nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, fake_nid); nd = __va(nd_pa); /* report and initialize */ diff --git a/include/linux/nodemask.h b/include/linux/nodemask.h index 41fb047bdba80..7c0571b95ce4d 100644 --- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -508,6 +508,12 @@ static inline int node_random(const nodemask_t *mask) #ifdef CONFIG_COHERENT_DEVICE extern int arch_check_node_cdm(int nid); +#ifdef CONFIG_ASCEND_CLEAN_CDM +extern int cdm_node_to_ddr_node(int nid); +#else +static inline int cdm_node_to_ddr_node(int nid) { return nid; } +#endif + static inline nodemask_t system_mem_nodemask(void) { nodemask_t system_mem; @@ -551,6 +557,7 @@ static inline void node_clear_state_cdm(int node) #else static inline int arch_check_node_cdm(int nid) { return 0; } +static inline int cdm_node_to_ddr_node(int nid) { return nid; } static inline nodemask_t system_mem_nodemask(void) { diff --git a/mm/sparse.c b/mm/sparse.c index 62ae3880a9add..f19d2ca250cee 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -458,21 +458,23 @@ static void __init sparse_init_nid(int nid, unsigned long pnum_begin, { unsigned long pnum, usemap_longs, *usemap; struct page *map; + int fake_nid = cdm_node_to_ddr_node(nid); usemap_longs = BITS_TO_LONGS(SECTION_BLOCKFLAGS_BITS); - usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(nid), + usemap = sparse_early_usemaps_alloc_pgdat_section(NODE_DATA(fake_nid), usemap_size() * map_count); if (!usemap) { pr_err("%s: node[%d] usemap allocation failed", __func__, nid); goto failed; } - sparse_buffer_init(map_count * section_map_size(), nid); + + sparse_buffer_init(map_count * section_map_size(), fake_nid); for_each_present_section_nr(pnum_begin, pnum) { if (pnum >= pnum_end) break; - map = sparse_mem_map_populate(pnum, nid, NULL); + map = sparse_mem_map_populate(pnum, fake_nid, NULL); if (!map) { pr_err("%s: node[%d] memory map backing failed. Some memory will not be available.", __func__, nid); -- 2.25.1

1 4

[PATCH openEuler-1.0-LTS 1/4] perf: hisi: Add support for HiSilicon SoC PMU driver dt probe
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Fang Lijun <fanglijun3(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4D4WR CVE: NA --------------------------- Add support for hisi PMU driver dt probe, Fix its compile error when disable CONFIG_ACPI. Signed-off-by: Fang Lijun <fanglijun3(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/perf/Kconfig | 2 +- drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c | 1 + drivers/perf/hisilicon/hisi_uncore_hha_pmu.c | 23 +++++++++++++++---- drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c | 20 +++++++++++++--- 4 files changed, 38 insertions(+), 8 deletions(-) diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 92be6a36a128f..d4b9681418f88 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -72,7 +72,7 @@ config ARM_DSU_PMU config HISI_PMU bool "HiSilicon SoC PMU" - depends on ARM64 && ACPI + depends on ARM64 help Support for HiSilicon SoC uncore performance monitoring unit (PMU), such as: L3C, HHA and DDRC. diff --git a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c index 090667d487504..3f3f4ab3aacce 100644 --- a/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_ddrc_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> diff --git a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c index c35bc248db7e7..4dd4d6b650aed 100644 --- a/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_hha_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> @@ -235,20 +236,34 @@ static const struct acpi_device_id hisi_hha_pmu_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, hisi_hha_pmu_acpi_match); -static int hisi_hha_pmu_init_data(struct platform_device *pdev, +#ifdef CONFIG_ACPI +static int hisi_hha_pmu_init_index(struct platform_device *pdev, struct hisi_pmu *hha_pmu) { - unsigned long long id; - struct resource *res; acpi_status status; + unsigned long long id; status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - "_UID", NULL, &id); + "_UID", NULL, &id); if (ACPI_FAILURE(status)) return -EINVAL; hha_pmu->index_id = id; + return 0; +} +#endif + +static int hisi_hha_pmu_init_data(struct platform_device *pdev, + struct hisi_pmu *hha_pmu) +{ + struct resource *res; + +#ifdef CONFIG_ACPI + if (hisi_hha_pmu_init_index(pdev, hha_pmu)) + dev_info(&pdev->dev, "Can not init index id by acpi!\n"); +#endif + /* * Use SCCL_ID and UID to identify the HHA PMU, while * SCCL_ID is in MPIDR[aff2]. diff --git a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c index 6ce1d69c63198..4a42926800e50 100644 --- a/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_l3c_pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/list.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/smp.h> @@ -234,20 +235,33 @@ static const struct acpi_device_id hisi_l3c_pmu_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, hisi_l3c_pmu_acpi_match); -static int hisi_l3c_pmu_init_data(struct platform_device *pdev, +#ifdef CONFIG_ACPI +static int hisi_l3c_pmu_init_index(struct platform_device *pdev, struct hisi_pmu *l3c_pmu) { unsigned long long id; - struct resource *res; acpi_status status; status = acpi_evaluate_integer(ACPI_HANDLE(&pdev->dev), - "_UID", NULL, &id); + "_UID", NULL, &id); if (ACPI_FAILURE(status)) return -EINVAL; l3c_pmu->index_id = id; + return 0; +} +#endif + +static int hisi_l3c_pmu_init_data(struct platform_device *pdev, + struct hisi_pmu *l3c_pmu) +{ + struct resource *res; + +#ifdef CONFIG_ACPI + if (hisi_l3c_pmu_init_index(pdev, l3c_pmu)) + dev_info(&pdev->dev, "Can not init index id by acpi!"); +#endif /* * Use the SCCL_ID and CCL_ID to identify the L3C PMU, while * SCCL_ID is in MPIDR[aff2] and CCL_ID is in MPIDR[aff1]. -- 2.25.1

1 3

[PATCH openEuler-1.0-LTS 1/7] corelockup: Add support of cpu core hang check
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Dong Kai <dongkai11(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4F3V1 CVE: NA -------------------------------- The softlockup and hardlockup detector only check the status of the cpu which it resides. If certain cpu core suspends, they are both not works. There is no any valid log but the cpu already abnormal and brings a lot of problems of system. To detect this case, we add the corelockup detector. First we use whether cpu core can responds to nmi as a sectence to determine if it is suspended. Then things is simple. Per cpu core maintains it's nmi interrupt counts and detector the nmi_counts of next cpu core. If the nmi interrupt counts not changed any more which means it can't respond nmi normally, we regard it as suspend. To ensure robustness, only consecutive lost nmi more than two times then trigger the warn. The detection chain is as following: cpu0->cpu1->...->cpuN->cpu0 Signed-off-by: Dong Kai <dongkai11(a)huawei.com> Reviewed-by: Kuohai Xu <xukuohai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/nmi.h | 6 ++ kernel/watchdog.c | 15 +++- kernel/watchdog_hld.c | 165 ++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig.debug | 8 ++ 4 files changed, 192 insertions(+), 2 deletions(-) diff --git a/include/linux/nmi.h b/include/linux/nmi.h index 84f324d65068b..745d66c36e244 100644 --- a/include/linux/nmi.h +++ b/include/linux/nmi.h @@ -124,6 +124,12 @@ static inline int hardlockup_detector_perf_init(void) { return 0; } # endif #endif +#ifdef CONFIG_CORELOCKUP_DETECTOR +extern void corelockup_detector_init(void); +extern void corelockup_detector_online_cpu(unsigned int cpu); +extern void corelockup_detector_offline_cpu(unsigned int cpu); +#endif + void watchdog_nmi_stop(void); void watchdog_nmi_start(void); int watchdog_nmi_probe(void); diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 0dd17265dcbd4..8b54fd30a597f 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -551,15 +551,23 @@ static void softlockup_start_all(void) int lockup_detector_online_cpu(unsigned int cpu) { - if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) + if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) { watchdog_enable(cpu); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_online_cpu(cpu); +#endif + } return 0; } int lockup_detector_offline_cpu(unsigned int cpu) { - if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) + if (cpumask_test_cpu(cpu, &watchdog_allowed_mask)) { watchdog_disable(cpu); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_offline_cpu(cpu); +#endif + } return 0; } @@ -783,4 +791,7 @@ void __init lockup_detector_init(void) if (!watchdog_nmi_probe()) nmi_watchdog_available = true; lockup_detector_setup(); +#ifdef CONFIG_CORELOCKUP_DETECTOR + corelockup_detector_init(); +#endif } diff --git a/kernel/watchdog_hld.c b/kernel/watchdog_hld.c index 904a95262fcf6..e965c31958203 100644 --- a/kernel/watchdog_hld.c +++ b/kernel/watchdog_hld.c @@ -39,6 +39,163 @@ notrace void __weak arch_touch_nmi_watchdog(void) } EXPORT_SYMBOL(arch_touch_nmi_watchdog); +#ifdef CONFIG_CORELOCKUP_DETECTOR +/* + * The softlockup and hardlockup detector only check the status + * of the cpu which it resides. If certain cpu core suspends, + * they are both not works. There is no any valid log but the + * cpu already abnormal and brings a lot of problems of system. + * To detect this case, we add the corelockup detector. + * + * First we use whether cpu core can responds to nmi as a sectence + * to determine if it is suspended. Then things is simple. Per cpu + * core maintains it's nmi interrupt counts and detector the + * nmi_counts of next cpu core. If the nmi interrupt counts not + * changed any more which means it can't respond nmi normally, we + * regard it as suspend. + * + * To ensure robustness, only consecutive lost nmi more than two + * times then trigger the warn. + * + * The detection chain is as following: + * cpu0->cpu1->...->cpuN->cpu0 + * + * detector_cpu: the target cpu to detector of current cpu + * nmi_interrupts: the nmi counts of current cpu + * nmi_cnt_saved: saved nmi counts of detector_cpu + * nmi_cnt_missed: the nmi consecutive miss counts of detector_cpu + */ +static DEFINE_PER_CPU(unsigned int, detector_cpu); +static DEFINE_PER_CPU(unsigned long, nmi_interrupts); +static DEFINE_PER_CPU(unsigned long, nmi_cnt_saved); +static DEFINE_PER_CPU(unsigned long, nmi_cnt_missed); +static DEFINE_PER_CPU(bool, core_watchdog_warn); + +static void watchdog_nmi_interrupts(void) +{ + __this_cpu_inc(nmi_interrupts); +} + +static void corelockup_status_copy(unsigned int from, unsigned int to) +{ + per_cpu(nmi_cnt_saved, to) = per_cpu(nmi_cnt_saved, from); + per_cpu(nmi_cnt_missed, to) = per_cpu(nmi_cnt_missed, from); + + /* always update detector cpu at the end */ + per_cpu(detector_cpu, to) = per_cpu(detector_cpu, from); +} + +static void corelockup_status_init(unsigned int cpu, unsigned int target) +{ + /* + * initialize saved count to max to avoid unnecessary misjudge + * caused by delay running of nmi on target cpu + */ + per_cpu(nmi_cnt_saved, cpu) = ULONG_MAX; + per_cpu(nmi_cnt_missed, cpu) = 0; + + /* always update detector cpu at the end */ + per_cpu(detector_cpu, cpu) = target; +} + +void __init corelockup_detector_init(void) +{ + unsigned int cpu, next; + + /* detector cpu is set to the next valid logically one */ + for_each_cpu_and(cpu, &watchdog_cpumask, cpu_online_mask) { + next = cpumask_next_and(cpu, &watchdog_cpumask, + cpu_online_mask); + if (next >= nr_cpu_ids) + next = cpumask_first_and(&watchdog_cpumask, + cpu_online_mask); + corelockup_status_init(cpu, next); + } +} + +/* + * Before: first->next + * After: first->[new]->next + */ +void corelockup_detector_online_cpu(unsigned int cpu) +{ + unsigned int first = cpumask_first_and(&watchdog_cpumask, + cpu_online_mask); + + if (WARN_ON(first >= nr_cpu_ids)) + return; + + /* cpu->next */ + corelockup_status_copy(first, cpu); + + /* first->cpu */ + corelockup_status_init(first, cpu); +} + +/* + * Before: prev->cpu->next + * After: prev->next + */ +void corelockup_detector_offline_cpu(unsigned int cpu) +{ + unsigned int prev = nr_cpu_ids; + unsigned int i; + + /* found prev cpu */ + for_each_cpu_and(i, &watchdog_cpumask, cpu_online_mask) { + if (per_cpu(detector_cpu, i) == cpu) { + prev = i; + break; + } + } + + if (WARN_ON(prev == nr_cpu_ids)) + return; + + /* prev->next */ + corelockup_status_copy(cpu, prev); +} + +static bool is_corelockup(unsigned int cpu) +{ + unsigned long nmi_int = per_cpu(nmi_interrupts, cpu); + + /* skip check if only one cpu online */ + if (cpu == smp_processor_id()) + return false; + + if (__this_cpu_read(nmi_cnt_saved) != nmi_int) { + __this_cpu_write(nmi_cnt_saved, nmi_int); + __this_cpu_write(nmi_cnt_missed, 0); + per_cpu(core_watchdog_warn, cpu) = false; + return false; + } + + __this_cpu_inc(nmi_cnt_missed); + if (__this_cpu_read(nmi_cnt_missed) > 2) + return true; + + return false; +} +NOKPROBE_SYMBOL(is_corelockup); + +static void watchdog_corelockup_check(struct pt_regs *regs) +{ + unsigned int cpu = __this_cpu_read(detector_cpu); + + if (is_corelockup(cpu)) { + if (per_cpu(core_watchdog_warn, cpu) == true) + return; + pr_emerg("Watchdog detected core LOCKUP on cpu %d\n", cpu); + + if (hardlockup_panic) + nmi_panic(regs, "Core LOCKUP"); + + per_cpu(core_watchdog_warn, cpu) = true; + } +} +#endif + #ifdef CONFIG_HARDLOCKUP_CHECK_TIMESTAMP static DEFINE_PER_CPU(ktime_t, last_timestamp); static DEFINE_PER_CPU(unsigned int, nmi_rearmed); @@ -106,6 +263,14 @@ static inline bool watchdog_check_timestamp(void) void watchdog_hardlockup_check(struct pt_regs *regs) { +#ifdef CONFIG_CORELOCKUP_DETECTOR + /* Kick nmi interrupts */ + watchdog_nmi_interrupts(); + + /* corelockup check */ + watchdog_corelockup_check(regs); +#endif + if (__this_cpu_read(watchdog_nmi_touch) == true) { __this_cpu_write(watchdog_nmi_touch, false); return; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 0ee305de7d0ec..4a78bacd405bd 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -881,6 +881,14 @@ config HARDLOCKUP_DETECTOR chance to run. The current stack trace is displayed upon detection and the system will stay locked up. +config CORELOCKUP_DETECTOR + bool "Detect Core Lockups" + depends on HARDLOCKUP_DETECTOR && SOFTLOCKUP_DETECTOR + depends on ARM64 + default n + help + Corelockups is used to check whether cpu core hungup or not. + config BOOTPARAM_HARDLOCKUP_PANIC bool "Panic (Reboot) On Hard Lockups" depends on HARDLOCKUP_DETECTOR -- 2.25.1

1 6

[PATCH openEuler-1.0-LTS 01/41] share_pool: Rename sp_stat_idr to sp_proc_stat_idr
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Tang Yizhou <tangyizhou(a)huawei.com> ascend inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4EUVI CVE: NA ------------------------------------------------- We are going to redesign the accounting subsystem of share pool. We need to disambiguate the meaning of sp_stat_idr, as we will introduce an struct which representing per-spg statistics. Signed-off-by: Tang Yizhou <tangyizhou(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Zhou Guanghui <zhouguanghui1(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/share_pool.c | 44 ++++++++++++++++++++++---------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/mm/share_pool.c b/mm/share_pool.c index cd6e137fe6698..c4b8daa47fcfd 100644 --- a/mm/share_pool.c +++ b/mm/share_pool.c @@ -95,9 +95,9 @@ static DEFINE_IDA(sp_group_id_ida); /*** Statistical and maintenance tools ***/ /* idr of all sp_proc_stats */ -static DEFINE_IDR(sp_stat_idr); -/* rw semaphore for sp_stat_idr and mm->sp_stat_id */ -static DECLARE_RWSEM(sp_stat_sem); +static DEFINE_IDR(sp_proc_stat_idr); +/* rw semaphore for sp_proc_stat_idr */ +static DECLARE_RWSEM(sp_proc_stat_sem); /* for kthread buff_module_guard_work */ static struct sp_proc_stat kthread_stat; @@ -107,7 +107,7 @@ static struct sp_proc_stat *sp_get_proc_stat_locked(int tgid) { struct sp_proc_stat *stat; - stat = idr_find(&sp_stat_idr, tgid); + stat = idr_find(&sp_proc_stat_idr, tgid); /* maybe NULL or not, we always return it */ return stat; @@ -118,7 +118,7 @@ static struct sp_proc_stat *sp_get_proc_stat_ref_locked(int tgid) { struct sp_proc_stat *stat; - stat = idr_find(&sp_stat_idr, tgid); + stat = idr_find(&sp_proc_stat_idr, tgid); if (!stat || !atomic_inc_not_zero(&stat->use_count)) stat = NULL; @@ -137,16 +137,16 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, int id, tgid = tsk->tgid; int ret; - down_write(&sp_stat_sem); + down_write(&sp_proc_stat_sem); id = mm->sp_group_master->sp_stat_id; if (id) { /* other threads in the same process may have initialized it */ stat = sp_get_proc_stat_locked(tgid); if (stat) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); return stat; } else { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); /* if enter this branch, that's our mistake */ pr_err_ratelimited("share pool: proc stat invalid id %d\n", id); return ERR_PTR(-EBUSY); @@ -155,7 +155,7 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, stat = kzalloc(sizeof(*stat), GFP_KERNEL); if (stat == NULL) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); pr_err_ratelimited("share pool: alloc proc stat failed due to lack of memory\n"); return ERR_PTR(-ENOMEM); } @@ -167,16 +167,16 @@ static struct sp_proc_stat *sp_init_proc_stat(struct task_struct *tsk, stat->mm = mm; get_task_comm(stat->comm, tsk); - ret = idr_alloc(&sp_stat_idr, stat, tgid, tgid + 1, GFP_KERNEL); + ret = idr_alloc(&sp_proc_stat_idr, stat, tgid, tgid + 1, GFP_KERNEL); if (ret < 0) { - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); pr_err_ratelimited("share pool: proc stat idr alloc failed %d\n", ret); kfree(stat); return ERR_PTR(ret); } mm->sp_group_master->sp_stat_id = ret; - up_write(&sp_stat_sem); + up_write(&sp_proc_stat_sem); return stat; } @@ -184,9 +184,9 @@ static struct sp_proc_stat *sp_get_proc_stat(int tgid) { struct sp_proc_stat *stat; - down_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); stat = sp_get_proc_stat_locked(tgid); - up_read(&sp_stat_sem); + up_read(&sp_proc_stat_sem); return stat; } @@ -195,9 +195,9 @@ struct sp_proc_stat *sp_get_proc_stat_ref(int tgid) { struct sp_proc_stat *stat; - down_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); stat = sp_get_proc_stat_ref_locked(tgid); - up_read(&sp_stat_sem); + up_read(&sp_proc_stat_sem); return stat; } @@ -2850,10 +2850,10 @@ __setup("enable_sp_multi_group_mode", enable_sp_multi_group_mode); static void free_sp_proc_stat(struct sp_proc_stat *stat) { - down_write(&sp_stat_sem); + down_write(&sp_proc_stat_sem); stat->mm->sp_group_master->sp_stat_id = 0; - idr_remove(&sp_stat_idr, stat->tgid); - up_write(&sp_stat_sem); + idr_remove(&sp_proc_stat_idr, stat->tgid); + up_write(&sp_proc_stat_sem); kfree(stat); } @@ -3163,9 +3163,9 @@ static int proc_stat_show(struct seq_file *seq, void *offset) byte2kb(atomic64_read(&kthread_stat.k2u_size))); /* pay attention to potential ABBA deadlock */ - down_read(&sp_stat_sem); - idr_for_each(&sp_stat_idr, idr_proc_stat_cb, seq); - up_read(&sp_stat_sem); + down_read(&sp_proc_stat_sem); + idr_for_each(&sp_proc_stat_idr, idr_proc_stat_cb, seq); + up_read(&sp_proc_stat_sem); return 0; } -- 2.25.1

1 40

[PATCH openEuler-1.0-LTS 1/7] sharepool: Fix ASLR broken
by Yang Yingliang 30 Oct '21

30 Oct '21

From: Wang Wensheng <wangwensheng4(a)huawei.com> ascend inclusion category: bugfix bugzilla: NA CVE: NA --------------------------- To avoid mmap vspace reserved for sharepool, we currently change the high_limit to MMAP_SHARE_POOL_START in arch_get_unmapped_area() and arch_get_unmapped_area_topdown(). In mmap-topdown scene, this make the start address of mmap being always MMAP_SHARE_POOL_START. ASLR got broken. To fix this, this patch set the mm->mmap_base based on MMAP_SHARE_POOL_START instead of STACK_TOP in topdown scene. Fixes: 4bdd5c21793e ("ascend: memory: introduce do_mm_populate and hugetlb_insert_hugepage") Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/mm/mmap.c | 6 +++++- include/linux/share_pool.h | 4 ++-- 2 files changed, 7 insertions(+), 3 deletions(-) diff --git a/arch/arm64/mm/mmap.c b/arch/arm64/mm/mmap.c index ac89686c4af89..87f29df8126ba 100644 --- a/arch/arm64/mm/mmap.c +++ b/arch/arm64/mm/mmap.c @@ -28,6 +28,7 @@ #include <linux/io.h> #include <linux/personality.h> #include <linux/random.h> +#include <linux/share_pool.h> #include <asm/cputype.h> @@ -80,7 +81,10 @@ static unsigned long mmap_base(unsigned long rnd, struct rlimit *rlim_stack) else if (gap > MAX_GAP) gap = MAX_GAP; - return PAGE_ALIGN(STACK_TOP - gap - rnd); + if (sp_is_enabled()) + return ALIGN_DOWN(MMAP_SHARE_POOL_START - rnd, PAGE_SIZE); + else + return PAGE_ALIGN(STACK_TOP - gap - rnd); } /* diff --git a/include/linux/share_pool.h b/include/linux/share_pool.h index 9650f257b3ad7..9557a8be46677 100644 --- a/include/linux/share_pool.h +++ b/include/linux/share_pool.h @@ -130,8 +130,6 @@ struct sp_proc_stat { atomic64_t k2u_size; }; -#ifdef CONFIG_ASCEND_SHARE_POOL - #define MAP_SHARE_POOL 0x100000 #define MMAP_TOP_4G_SIZE 0x100000000UL @@ -148,6 +146,8 @@ struct sp_proc_stat { #define MMAP_SHARE_POOL_START (MMAP_SHARE_POOL_END - MMAP_SHARE_POOL_SIZE) #define MMAP_SHARE_POOL_16G_START (MMAP_SHARE_POOL_END - MMAP_SHARE_POOL_DVPP_SIZE) +#ifdef CONFIG_ASCEND_SHARE_POOL + static inline void sp_init_mm(struct mm_struct *mm) { mm->sp_group = NULL; -- 2.25.1

1 6

2025

2024

2023

2022

2021

2020

2019

Kernel