- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 v6 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 09 Jan '24

09 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. Li Lingfeng (5): block: Count writers and mounters regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 19 +++++++ block/bdev.c | 104 ++++++++++++++++++++++++++++++++------ include/linux/blk_types.h | 1 + 3 files changed, 109 insertions(+), 15 deletions(-) -- 2.31.1

2 6

[PATCH V4 OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 355 +++++++++++++++++++++++++ 5 files changed, 371 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index a417275129a4..13ddaf47cff2 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6925,6 +6925,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index c09c7fe35a54..84727e7ad415 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8121,6 +8121,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..712992cba9e6 --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +static unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry; + + dentry = d_find_alias(inode); + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit; + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + limit = READ_ONCE(buf_limit); + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("dirty_pages: please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + + ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long limit; + + ret = kstrtoul_from_user(buf, count, 10, &limit); + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

2 1

[PATCH OLK-6.6 0/2] Some simple extensions of the kfence feature
by Ze Zuo 09 Jan '24

09 Jan '24

This patchset supports the following two features: 1. The number of kfence objects is a key factor to balance kfence bug detection capabilities and performance loss, and often needs to be optimized according to actual business scenarios. The number of kfence objects can be dynamically configured kfence.num_objects cmdline, so as to reduce the release of kernel versions in actual use, thereby reducing costs. 2. The kfence feature under arm64 supports dynamic opening after system startup, which will turn all the kernel memblock memory into page-mapped mapping and increase the memory overhead, in order to save the page table memory usage, only the kfence pool supports page-mapped mapping, which can be enabled at kernel startup by setting kfence.sample _interval=-1 at kernel startup to enable the dynamic on capability, at this time it will allocate memory for kfence by default. The kfence will be allocated memory by default. Subsequent dynamic enablement and disabling will no longer consume additional memory. This feature has been tested under ARM64, x86_64 and ARM architectures, and the Kfence Kunit test results are consistent with the native ones. ChangeLog: - Add config kfence_must_early_init to perform code isolation for non-functional purposes. - Some minor changes about document, no functional changes. Ze Zuo (2): kfence: Add a module parameter to adjust kfence objects arm64: kfence: scale sample_interval to support early init for kfence. Documentation/dev-tools/kfence.rst | 8 +- arch/arm64/include/asm/kfence.h | 3 + arch/arm64/mm/mmu.c | 5 + include/linux/kfence.h | 13 +- lib/Kconfig.kfence | 28 +++++ mm/kfence/core.c | 189 +++++++++++++++++++++++++---- mm/kfence/kfence.h | 4 +- mm/kfence/kfence_test.c | 2 +- 8 files changed, 222 insertions(+), 30 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 09 Jan '24

09 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 2 ++ include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 ++++ kernel/pid.c | 57 +++++++++++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 ++++++++ kernel/sysctl.c | 2 ++ kernel/trace/pid_list.c | 4 +++ kernel/trace/trace.c | 4 +++ kernel/trace/trace.h | 2 ++ 9 files changed, 93 insertions(+) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..8c07d158bb54 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default y + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..4e9267988dd7 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -45,6 +45,10 @@ #include <net/sock.h> #include <uapi/linux/pidfd.h> +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +#include <linux/kmemleak.h> +#endif + struct pid init_struct_pid = { .count = REFCOUNT_INIT(1), .tasks = { @@ -59,12 +63,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +91,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +208,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +252,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +668,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +709,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +719,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH V4 OLK-6.6 0/8] Spark SQL scenario bpf readahead optimization synchronization to OLK-6.6
by ZhaoLong Wang 09 Jan '24

09 Jan '24

CONFIG: CONFIG_DEBUG_INFO_BTF=y CONFIG_BPF_SYSCALL=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y V2: - Using helpers function, such as i_size_read(), round_up - Fix commit log Signature - Fix the user-mode test program V3 - Do not use the round_up helper function. Use the correct calculation - err = -errno before printf V4 - Drop the "Conflict" in the commit log. Hou Tao (5): vfs: add bare tracepoints for vfs read and release fs: add helper fs_file_read_do_trace() xfs: add trace for read and release of regular file ext4: add trace for the read and release of regular file selftests/bpf: add demo for file read pattern detection Yufen Yu (1): readahead: introduce FMODE_CTL_WILLNEED to read first 2MB of file ZhaoLong Wang (2): VFS: Rolling Back the fmode macro definition and structure members selftests/bpf: Update the demo file_read_pattern to run on libbpf 1.0+ fs/ext4/file.c | 4 + fs/read_write.c | 38 +++++ fs/xfs/xfs_file.c | 3 + include/linux/fs.h | 37 +++++ include/trace/events/fs.h | 33 +++++ mm/readahead.c | 40 ++++- tools/testing/selftests/bpf/Makefile | 1 + .../testing/selftests/bpf/file_read_pattern.c | 76 ++++++++++ .../bpf/progs/file_read_pattern_prog.c | 137 ++++++++++++++++++ 9 files changed, 368 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/fs.h create mode 100644 tools/testing/selftests/bpf/file_read_pattern.c create mode 100644 tools/testing/selftests/bpf/progs/file_read_pattern_prog.c -- 2.39.2

2 9

[PATCH OLK-6.6 0/9] Add swap control for memcg
by Jinjiang Tu 09 Jan '24

09 Jan '24

This series patches add swap control for memory cgroup. Patch[1] add page type in memory.reclaim interface to support reclaim anon pages. Patch[3] add memory.force_swapin interface to support swap back pages proactively. Patch[4-6] add memory.swapfile interface to limit available swap device for memory cgroup. Patch[7] add memory.swap.max interface to limit usage of swap for memory cgroup. Jinjiang Tu (1): memcg: make sysctl registration more extensible Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default zhaoxiaoqiang11 (1): memcg/swap: add ability to disable memcg swap .../admin-guide/cgroup-v1/memory.rst | 4 + Documentation/admin-guide/cgroup-v2.rst | 10 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 35 ++ include/linux/mm.h | 4 + include/linux/swap.h | 12 +- include/linux/swap_slots.h | 2 +- init/Kconfig | 9 + mm/madvise.c | 31 +- mm/memcontrol.c | 493 +++++++++++++++++- mm/swap_slots.c | 151 +++++- mm/swapfile.c | 97 +++- mm/vmscan.c | 9 + 14 files changed, 810 insertions(+), 49 deletions(-) -- 2.25.1

2 10

[PATCH OLK-6.6] arm64: config: disable network config
by Zhengchao Shao 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8URWS CVE: NA -------------------------------- Disable arm64 network config. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 32 +++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 86370e8686f5..a7d78c16002b 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -1301,7 +1301,7 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NETFILTER_NETLINK_OSF=m CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_SYSLOG=m +# CONFIG_NF_LOG_SYSLOG is not set CONFIG_NETFILTER_CONNCOUNT=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y @@ -1863,7 +1863,7 @@ CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=m CONFIG_NET_9P=m -CONFIG_NET_9P_FD=m +# CONFIG_NET_9P_FD is not set CONFIG_NET_9P_VIRTIO=m # CONFIG_NET_9P_RDMA is not set # CONFIG_NET_9P_DEBUG is not set @@ -2760,7 +2760,7 @@ CONFIG_NET_XGENE_V2=m CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_AQTION is not set CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ASIX=y +# CONFIG_NET_VENDOR_ASIX is not set # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set @@ -2805,16 +2805,16 @@ CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_CHELSIO_TLS_DEVICE=m # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_NET_VENDOR_DAVICOM=y +# CONFIG_NET_VENDOR_DAVICOM is not set # CONFIG_DM9051 is not set CONFIG_DNET=m # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -CONFIG_NET_VENDOR_ENGLEDER=y +# CONFIG_NET_VENDOR_ENGLEDER is not set # CONFIG_TSNEP is not set # CONFIG_NET_VENDOR_EZCHIP is not set -CONFIG_NET_VENDOR_FUNGIBLE=y +# CONFIG_NET_VENDOR_FUNGIBLE is not set # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set @@ -2852,13 +2852,13 @@ CONFIG_I40E=m CONFIG_IAVF=m CONFIG_I40EVF=m CONFIG_ICE=m -CONFIG_ICE_SWITCHDEV=y +# CONFIG_ICE_SWITCHDEV is not set CONFIG_FM10K=m # CONFIG_IGC is not set # CONFIG_JME is not set -CONFIG_NET_VENDOR_ADI=y +# CONFIG_NET_VENDOR_ADI is not set # CONFIG_ADIN1110 is not set -CONFIG_NET_VENDOR_LITEX=y +# CONFIG_NET_VENDOR_LITEX is not set # CONFIG_LITEX_LITEETH is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y @@ -2895,7 +2895,7 @@ CONFIG_MLXFW=m # CONFIG_NET_VENDOR_MICROCHIP is not set CONFIG_NET_VENDOR_MICROSEMI=y # CONFIG_MSCC_OCELOT_SWITCH is not set -CONFIG_NET_VENDOR_MICROSOFT=y +# CONFIG_NET_VENDOR_MICROSOFT is not set CONFIG_NET_VENDOR_MYRI=y # CONFIG_MYRI10GE is not set # CONFIG_FEALNX is not set @@ -2906,7 +2906,7 @@ CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NFP=m CONFIG_NFP_APP_FLOWER=y CONFIG_NFP_APP_ABM_NIC=y -CONFIG_NFP_NET_IPSEC=y +# CONFIG_NFP_NET_IPSEC is not set # CONFIG_NFP_DEBUG is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y @@ -2966,10 +2966,10 @@ CONFIG_SMSC9420=m # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set -CONFIG_NET_VENDOR_VERTEXCOM=y +# CONFIG_NET_VENDOR_VERTEXCOM is not set # CONFIG_MSE102X is not set # CONFIG_NET_VENDOR_VIA is not set -CONFIG_NET_VENDOR_WANGXUN=y +# CONFIG_NET_VENDOR_WANGXUN is not set CONFIG_LIBWX=m CONFIG_NGBE=m CONFIG_TXGBE=m @@ -3235,7 +3235,7 @@ CONFIG_ATH10K_PCI=m CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set -CONFIG_WLAN_VENDOR_PURELIFI=y +# CONFIG_WLAN_VENDOR_PURELIFI is not set # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m @@ -3262,7 +3262,7 @@ CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set # CONFIG_WLAN_VENDOR_REALTEK is not set # CONFIG_WLAN_VENDOR_RSI is not set -CONFIG_WLAN_VENDOR_SILABS=y +# CONFIG_WLAN_VENDOR_SILABS is not set # CONFIG_WFX is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set @@ -7028,7 +7028,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y +# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1 is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y -- 2.34.1

2 1

[PATCH OLK-6.6] x86: config: disable network config
by Zhengchao Shao 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UM53 CVE: NA -------------------------------- Disable X86 network config. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 34 ++++++++++++++-------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 1ef398404878..dd7a8a3bca0f 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1860,7 +1860,7 @@ CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m CONFIG_BT_HS=y CONFIG_BT_LE=y -CONFIG_BT_LE_L2CAP_ECRED=y +# CONFIG_BT_LE_L2CAP_ECRED is not set # CONFIG_BT_6LOWPAN is not set # CONFIG_BT_LEDS is not set # CONFIG_BT_MSFTEXT is not set @@ -1876,7 +1876,7 @@ CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y -CONFIG_BT_HCIBTUSB_POLL_SYNC=y +# CONFIG_BT_HCIBTUSB_POLL_SYNC is not set CONFIG_BT_HCIBTUSB_BCM=y # CONFIG_BT_HCIBTUSB_MTK is not set CONFIG_BT_HCIBTUSB_RTL=y @@ -2788,7 +2788,7 @@ CONFIG_AMD_XGBE_HAVE_ECC=y CONFIG_NET_VENDOR_AQUANTIA=y CONFIG_AQTION=m # CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ASIX=y +# CONFIG_NET_VENDOR_ASIX is not set # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m @@ -2836,7 +2836,7 @@ CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m # CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_NET_VENDOR_DAVICOM=y +# CONFIG_NET_VENDOR_DAVICOM is not set # CONFIG_DM9051 is not set CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y @@ -2851,10 +2851,10 @@ CONFIG_BE2NET_HWMON=y # CONFIG_BE2NET_BE3 is not set CONFIG_BE2NET_LANCER=y CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_ENGLEDER=y +# CONFIG_NET_VENDOR_ENGLEDER is not set # CONFIG_TSNEP is not set # CONFIG_NET_VENDOR_EZCHIP is not set -CONFIG_NET_VENDOR_FUNGIBLE=y +# CONFIG_NET_VENDOR_FUNGIBLE is not set # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set @@ -2882,14 +2882,14 @@ CONFIG_I40E_DCB=y CONFIG_IAVF=m CONFIG_I40EVF=m CONFIG_ICE=m -CONFIG_ICE_SWITCHDEV=y -CONFIG_ICE_HWTS=y +# CONFIG_ICE_SWITCHDEV is not set +#CONFIG_ICE_HWTS is not set CONFIG_FM10K=m # CONFIG_IGC is not set # CONFIG_JME is not set -CONFIG_NET_VENDOR_ADI=y +# CONFIG_NET_VENDOR_ADI is not set # CONFIG_ADIN1110 is not set -CONFIG_NET_VENDOR_LITEX=y +# CONFIG_NET_VENDOR_LITEX is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m @@ -2924,7 +2924,7 @@ CONFIG_MLXFW=m # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_MICROSEMI is not set -CONFIG_NET_VENDOR_MICROSOFT=y +# CONFIG_NET_VENDOR_MICROSOFT is not set # CONFIG_MICROSOFT_MANA is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m @@ -2938,7 +2938,7 @@ CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NFP=m CONFIG_NFP_APP_FLOWER=y CONFIG_NFP_APP_ABM_NIC=y -CONFIG_NFP_NET_IPSEC=y +# CONFIG_NFP_NET_IPSEC is not set # CONFIG_NFP_DEBUG is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y @@ -2995,10 +2995,10 @@ CONFIG_SFC_MCDI_LOGGING=y # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set -CONFIG_NET_VENDOR_VERTEXCOM=y +# CONFIG_NET_VENDOR_VERTEXCOM is not set # CONFIG_MSE102X is not set # CONFIG_NET_VENDOR_VIA is not set -CONFIG_NET_VENDOR_WANGXUN=y +# CONFIG_NET_VENDOR_WANGXUN is not set CONFIG_LIBWX=m CONFIG_NGBE=m CONFIG_TXGBE=m @@ -3325,7 +3325,7 @@ CONFIG_MT76x2U=m CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set -CONFIG_WLAN_VENDOR_PURELIFI=y +# CONFIG_WLAN_VENDOR_PURELIFI is not set # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m @@ -3382,7 +3382,7 @@ CONFIG_RTL8XXXU=m # CONFIG_RTW88 is not set # CONFIG_RTW89 is not set # CONFIG_WLAN_VENDOR_RSI is not set -CONFIG_WLAN_VENDOR_SILABS=y +# CONFIG_WLAN_VENDOR_SILABS is not set # CONFIG_WFX is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set @@ -8225,7 +8225,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y +# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1 is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y -- 2.34.1

2 1

[PATCH OLK-6.6 v2] block: support to account io_ticks precisely
by Yu Kuai 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8RIME CVE: NA ----------------------------------------------- Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. In order to account io_ticks precisely, update_io_ticks() must know if there are IO inflight already, and this requires overhead slightly, hence precise io accounting is disabled by default, and user can enable it through sysfs entry. Noted that for rq-based devcie, part_stat_local_inc/dec() and part_in_flight() is used to track inflight instead of iterating tags, which is not supposed to be used in fast path because 'tags->lock' is grabbed in blk_mq_find_and_get_req(). Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Changes in v2: - some minor code changes, no functional change involed; - use kstrtobool() to replace strtobool() Documentation/ABI/stable/sysfs-block | 8 ++++-- block/blk-core.c | 27 ++++++++++++++++-- block/blk-merge.c | 3 ++ block/blk-mq-debugfs.c | 2 ++ block/blk-mq.c | 11 +++++++- block/blk-sysfs.c | 42 ++++++++++++++++++++++++++-- block/blk.h | 1 + block/genhd.c | 2 +- include/linux/blk-mq.h | 1 + include/linux/blkdev.h | 3 ++ 10 files changed, 91 insertions(+), 9 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b..79027bf2661a 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -358,8 +358,12 @@ What: /sys/block/<disk>/queue/iostats Date: January 2009 Contact: linux-block(a)vger.kernel.org Description: - [RW] This file is used to control (on/off) the iostats - accounting of the disk. + [RW] This file is used to control the iostats accounting of the + disk. If this value is 0, iostats accounting is disabled; If + this value is 1, iostats accounting is enabled, but io_ticks is + accounted by sampling and the result is not accurate; If this + value is 2, iostats accounting is enabled and io_ticks is + accounted precisely, but there will be slightly more overhead. What: /sys/block/<disk>/queue/logical_block_size diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..13a27d1d8540 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -71,6 +71,21 @@ static struct kmem_cache *blk_requestq_cachep; */ static struct workqueue_struct *kblockd_workqueue; +static bool precise_iostat; + +static int __init precise_iostat_setup(char *str) +{ + bool precise; + + if (!kstrtobool(str, &precise)) { + precise_iostat = precise; + pr_info("precise iostat %d\n", precise_iostat); + } + + return 1; +} +__setup("precise_iostat=", precise_iostat_setup); + /** * blk_queue_flag_set - atomically set a queue flag * @flag: flag to be set @@ -441,6 +456,8 @@ struct request_queue *blk_alloc_queue(int node_id) blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ; + if (precise_iostat) + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); return q; @@ -938,11 +955,15 @@ EXPORT_SYMBOL_GPL(iocb_bio_iopoll); void update_io_ticks(struct block_device *part, unsigned long now, bool end) { unsigned long stamp; + bool precise = blk_queue_precise_io_stat(part->bd_queue); again: stamp = READ_ONCE(part->bd_stamp); - if (unlikely(time_after(now, stamp))) { - if (likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) - __part_stat_add(part, io_ticks, end ? now - stamp : 1); + if (unlikely(time_after(now, stamp)) && + likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) { + if (end || (precise && part_in_flight(part))) + __part_stat_add(part, io_ticks, now - stamp); + else if (!precise) + __part_stat_add(part, io_ticks, 1); } if (part->bd_partno) { part = bdev_whole(part); diff --git a/block/blk-merge.c b/block/blk-merge.c index 65e75efa9bd3..5db8228c46fc 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -783,6 +783,9 @@ static void blk_account_io_merge_request(struct request *req) if (blk_do_io_stat(req)) { part_stat_lock(); part_stat_inc(req->part, merges[op_stat_group(req_op(req))]); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index aa7a1357c3e1..9ad108307344 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -86,6 +86,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(FAIL_IO), QUEUE_FLAG_NAME(NONROT), QUEUE_FLAG_NAME(IO_STAT), + QUEUE_FLAG_NAME(PRECISE_IO_STAT), QUEUE_FLAG_NAME(NOXMERGES), QUEUE_FLAG_NAME(ADD_RANDOM), QUEUE_FLAG_NAME(SYNCHRONOUS), @@ -254,6 +255,7 @@ static const char *const rqf_name[] = { RQF_NAME(FAILED), RQF_NAME(QUIET), RQF_NAME(IO_STAT), + RQF_NAME(PRECISE_IO_STAT), RQF_NAME(PM), RQF_NAME(HASHED), RQF_NAME(STATS), diff --git a/block/blk-mq.c b/block/blk-mq.c index dd7c9e3eca1b..498a6306cbb5 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -360,8 +360,11 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, if (data->flags & BLK_MQ_REQ_PM) data->rq_flags |= RQF_PM; - if (blk_queue_io_stat(q)) + if (blk_queue_io_stat(q)) { data->rq_flags |= RQF_IO_STAT; + if (blk_queue_precise_io_stat(q)) + data->rq_flags |= RQF_PRECISE_IO_STAT; + } rq->rq_flags = data->rq_flags; if (data->rq_flags & RQF_SCHED_TAGS) { @@ -994,6 +997,9 @@ static inline void blk_account_io_done(struct request *req, u64 now) update_io_ticks(req->part, jiffies, true); part_stat_inc(req->part, ios[sgrp]); part_stat_add(req->part, nsecs[sgrp], now - req->start_time_ns); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } @@ -1016,6 +1022,9 @@ static inline void blk_account_io_start(struct request *req) part_stat_lock(); update_io_ticks(req->part, jiffies, false); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_inc(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..e58b1574e023 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -303,7 +303,6 @@ queue_##name##_store(struct request_queue *q, const char *page, size_t count) \ QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1); QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0); -QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0); QUEUE_SYSFS_BIT_FNS(stable_writes, STABLE_WRITES, 0); #undef QUEUE_SYSFS_BIT_FNS @@ -473,6 +472,45 @@ static ssize_t queue_dax_show(struct request_queue *q, char *page) return queue_var_show(blk_queue_dax(q), page); } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + int val = 0; + + if (blk_queue_io_stat(q)) + val = blk_queue_precise_io_stat(q) ? 2 : 1; + + return queue_var_show(val, page); +} + +static ssize_t +queue_iostats_store(struct request_queue *q, const char *page, size_t count) +{ + unsigned long nr; + int ret = queue_var_store(&nr, page, count); + + if (ret < 0) + return ret; + + switch (nr) { + case 0: + blk_queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 1: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 2: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + default: + return -EINVAL; + } + + return count; +} + #define QUEUE_RO_ENTRY(_prefix, _name) \ static struct queue_sysfs_entry _prefix##_entry = { \ .attr = { .name = _name, .mode = 0444 }, \ @@ -494,6 +532,7 @@ QUEUE_RO_ENTRY(queue_max_segments, "max_segments"); QUEUE_RO_ENTRY(queue_max_integrity_segments, "max_integrity_segments"); QUEUE_RO_ENTRY(queue_max_segment_size, "max_segment_size"); QUEUE_RW_ENTRY(elv_iosched, "scheduler"); +QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RO_ENTRY(queue_logical_block_size, "logical_block_size"); QUEUE_RO_ENTRY(queue_physical_block_size, "physical_block_size"); @@ -539,7 +578,6 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { }; QUEUE_RW_ENTRY(queue_nonrot, "rotational"); -QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RW_ENTRY(queue_random, "add_random"); QUEUE_RW_ENTRY(queue_stable_writes, "stable_writes"); diff --git a/block/blk.h b/block/blk.h index 08a358bc0919..67915b04b3c1 100644 --- a/block/blk.h +++ b/block/blk.h @@ -344,6 +344,7 @@ static inline bool blk_do_io_stat(struct request *rq) } void update_io_ticks(struct block_device *part, unsigned long now, bool end); +unsigned int part_in_flight(struct block_device *part); static inline void req_set_nomerge(struct request_queue *q, struct request *req) { diff --git a/block/genhd.c b/block/genhd.c index 4a16a424f57d..b3ff653f3e50 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -118,7 +118,7 @@ static void part_stat_read_all(struct block_device *part, } } -static unsigned int part_in_flight(struct block_device *part) +unsigned int part_in_flight(struct block_device *part) { unsigned int inflight = 0; int cpu; diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 3d74f3e5b995..9dfee0644f9c 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -46,6 +46,7 @@ typedef __u32 __bitwise req_flags_t; #define RQF_QUIET ((__force req_flags_t)(1 << 11)) /* account into disk and partition IO statistics */ #define RQF_IO_STAT ((__force req_flags_t)(1 << 13)) +#define RQF_PRECISE_IO_STAT ((__force req_flags_t)(1 << 14)) /* runtime pm request */ #define RQF_PM ((__force req_flags_t)(1 << 15)) /* on IO scheduler merge hash */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9f3bcbcb156d..bea0b5fdac74 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -536,6 +536,7 @@ struct request_queue { #define QUEUE_FLAG_NONROT 6 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 7 /* do disk/partitions IO accounting */ +#define QUEUE_FLAG_PRECISE_IO_STAT 8 /* do disk/partitions IO accounting precisely */ #define QUEUE_FLAG_NOXMERGES 9 /* No extended merges */ #define QUEUE_FLAG_ADD_RANDOM 10 /* Contributes to random pool */ #define QUEUE_FLAG_SYNCHRONOUS 11 /* always completes in submit context */ @@ -576,6 +577,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); #define blk_queue_stable_writes(q) \ test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) +#define blk_queue_precise_io_stat(q) \ + test_bit(QUEUE_FLAG_PRECISE_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) -- 2.39.2

2 1

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 09 Jan '24

09 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

2024

2023

2022

2021

2020

2019

Kernel