- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10 00/11] md/raid1-10: limit the number of plugged bio
by Li Lingfeng 08 Jan '24

08 Jan '24

Too many plugged bios may affect IO performance and cost too much memory, so limit the number of it. Li Lingfeng (1): Revert "md/raid10: fix softlockup in raid10_unplug" Mariusz Tkaczyk (2): md: drop queue limitation for RAID1 and RAID10 md: raid1/raid10: drop pending_cnt Yu Kuai (8): md/raid10: prevent soft lockup while flush writes md/raid1-10: factor out a helper to add bio to plug md/raid1-10: factor out a helper to submit normal write md/raid1-10: submit write io directly if bitmap is not enabled md/md-bitmap: add a new helper to unplug bitmap asynchrously md/raid1-10: don't handle pluged bio by daemon thread md/raid1-10: limit the number of plugged bio md/raid1-10: fix casting from randomized structure in raid1_submit_write() drivers/md/md-bitmap.c | 33 +++++++++++++++++-- drivers/md/md-bitmap.h | 8 +++++ drivers/md/md.c | 9 +++++ drivers/md/md.h | 1 + drivers/md/raid1-10.c | 74 ++++++++++++++++++++++++++++++++++++++---- drivers/md/raid1.c | 46 +++----------------------- drivers/md/raid1.h | 1 - drivers/md/raid10.c | 65 +++++-------------------------------- drivers/md/raid10.h | 1 - 9 files changed, 130 insertions(+), 108 deletions(-) -- 2.31.1

1 11

[PATCH openEuler-22.03-LTS-SP2 0/4] ext4: fix some ext4_lblk_t overflow issues
by Baokun Li 08 Jan '24

08 Jan '24

Baokun Li (4): ext4: add two helper functions extent_logical_end() and pa_logical_end() ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow ext4: avoid overlapping preallocations due to overflow ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS fs/ext4/mballoc.c | 55 ++++++++++++++++++++++------------------------- fs/ext4/mballoc.h | 14 ++++++++++++ 2 files changed, 40 insertions(+), 29 deletions(-) -- 2.31.1

2 5

[PATCH openEuler-1.0-LTS] nvme: sanitize metadata bounce buffer for reads
by Li Lingfeng 08 Jan '24

08 Jan '24

From: Keith Busch <kbusch(a)kernel.org> mainline inclusion from mainline-v6.1-rc1 commit 2b32c76e2b0154b98b9322ae7546b8156cd703e6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8UJF0 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- User can request more metadata bytes than the device will write. Ensure kernel buffer is initialized so we're not leaking unsanitized memory on the copy-out. Fixes: 0b7f1f26f95a51a ("nvme: use the block layer for userspace passthrough metadata") Reviewed-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Kanchan Joshi <joshi.k(a)samsung.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Conflicts: Commit 2405252a680e ("nvme: move the ioctl code to a separate file") move nvme_add_user_metadata() from drivers/nvme/host/core.c to drivers/nvme/host/ioctl.c; Commit 38c0ddab7b93 ("nvme: refactor nvme_add_user_metadata") changed to use REQ_OP_DRV_OUT to identify the write request. Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/nvme/host/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 151ab076822b..b4d8aa84b744 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -856,9 +856,13 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf, if (!buf) goto out; - ret = -EFAULT; - if (write && copy_from_user(buf, ubuf, len)) - goto out_free_meta; + if (write) { + ret = -EFAULT; + if (copy_from_user(buf, ubuf, len)) + goto out_free_meta; + } else { + memset(buf, 0, len); + } bip = bio_integrity_alloc(bio, GFP_KERNEL, 1); if (IS_ERR(bip)) { -- 2.31.1

2 1

[PATCH OLK-6.6 v4 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 08 Jan '24

08 Jan '24

Both writing a mounted device and writing part0 while mounting a partition will provide a prompt message. v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. Li Lingfeng (5): block: Count bd_writers regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 19 ++++++++ block/bdev.c | 100 +++++++++++++++++++++++++++++++++----- include/linux/blk_types.h | 1 + 3 files changed, 107 insertions(+), 13 deletions(-) -- 2.31.1

2 6

[PATCH OLK-5.10] nvme: sanitize metadata bounce buffer for reads
by Li Lingfeng 08 Jan '24

08 Jan '24

From: Keith Busch <kbusch(a)kernel.org> mainline inclusion from mainline-v6.1-rc1 commit 2b32c76e2b0154b98b9322ae7546b8156cd703e6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8UHPD CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- User can request more metadata bytes than the device will write. Ensure kernel buffer is initialized so we're not leaking unsanitized memory on the copy-out. Fixes: 0b7f1f26f95a51a ("nvme: use the block layer for userspace passthrough metadata") Reviewed-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Kanchan Joshi <joshi.k(a)samsung.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Conflicts: Commit 2405252a680e ("nvme: move the ioctl code to a separate file") move nvme_add_user_metadata() from drivers/nvme/host/core.c to drivers/nvme/host/ioctl.c; Commit 38c0ddab7b93 ("nvme: refactor nvme_add_user_metadata") changed to use REQ_OP_DRV_OUT to identify the write request. Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/nvme/host/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 32e08f287602..142f3a03509c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -966,9 +966,13 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf, if (!buf) goto out; - ret = -EFAULT; - if (write && copy_from_user(buf, ubuf, len)) - goto out_free_meta; + if (write) { + ret = -EFAULT; + if (copy_from_user(buf, ubuf, len)) + goto out_free_meta; + } else { + memset(buf, 0, len); + } bip = bio_integrity_alloc(bio, GFP_KERNEL, 1); if (IS_ERR(bip)) { -- 2.31.1

2 1

[PATCH OLK-6.6 0/9] Add swap control for memcg
by Jinjiang Tu 08 Jan '24

08 Jan '24

This series patches add swap control for memory cgroup. Patch[1] add page type in memory.reclaim interface to support reclaim anon pages. Patch[3] add memory.force_swapin interface to support swap back pages proactively. Patch[4-6] add memory.swapfile interface to limit available swap device for memory cgroup. Patch[7] add memory.swap.max interface to limit usage of swap for memory cgroup. Jinjiang Tu (1): memcg: make sysctl registration more extensible Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default zhaoxiaoqiang11 (1): memcg/swap: add ability to disable memcg swap .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 10 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 35 ++ include/linux/mm.h | 4 + include/linux/swap.h | 12 +- include/linux/swap_slots.h | 2 +- init/Kconfig | 9 + mm/madvise.c | 31 +- mm/memcontrol.c | 497 +++++++++++++++++- mm/swap_slots.c | 151 +++++- mm/swapfile.c | 97 +++- mm/vmscan.c | 9 + 14 files changed, 813 insertions(+), 49 deletions(-) -- 2.25.1

1 9

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 08 Jan '24

08 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

2 2

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 08 Jan '24

08 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6 V1 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH v3 OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 08 Jan '24

08 Jan '24

v2 -> v3 - fix code style and commit messages v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: add ETMEM feature CONFIG to mm/Kconfig etmem: add ETMEM scan feature CONFIG to mm/Kconfig mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

2024

2023

2022

2021

2020

2019

Kernel