- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 0/4] Fix smmu pgtable prfetch and add support
by Zhang Zekun 25 Dec '23

25 Dec '23

Fix the pgtable prefetch problem, besides add some ras features which is used in ascend scenarios. Zhang Jian (1): mm: export collect_procs() Zhang Zekun (3): iommu/arm-smmu-v3: Add a SYNC command to avoid broken page table prefetch mm: memory-failure: Directly return the task for specific use ACPI: APEI: Don't call notifier again in ts senario arch/arm64/Kconfig | 13 +++++++++++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/cpu_errata.c | 14 ++++++++++++++ arch/arm64/tools/cpucaps | 1 + drivers/acpi/apei/ghes.c | 3 +++ drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 20 ++++++++++++++++++++ include/linux/mm.h | 8 ++++++++ mm/Kconfig | 9 +++++++++ mm/memory-failure.c | 13 +++++++++++++ 9 files changed, 82 insertions(+) -- 2.17.1

2 5

[PATCH openEuler-1.0-LTS v2] net: check vlan filter feature in vlan_vids_add_by_dev() and vlan_vids_del_by_dev()
by Liu Jian 25 Dec '23

25 Dec '23

mainline inclusion from mainline-v6.7-rc7 commit 01a564bab4876007ce35f312e16797dfe40e4823 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KNM7 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- I got the below warning trace: WARNING: CPU: 4 PID: 4056 at net/core/dev.c:11066 unregister_netdevice_many_notify CPU: 4 PID: 4056 Comm: ip Not tainted 6.7.0-rc4+ #15 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:unregister_netdevice_many_notify+0x9a4/0x9b0 Call Trace: rtnl_dellink rtnetlink_rcv_msg netlink_rcv_skb netlink_unicast netlink_sendmsg __sock_sendmsg ____sys_sendmsg ___sys_sendmsg __sys_sendmsg do_syscall_64 entry_SYSCALL_64_after_hwframe It can be repoduced via: ip netns add ns1 ip netns exec ns1 ip link add bond0 type bond mode 0 ip netns exec ns1 ip link add bond_slave_1 type veth peer veth2 ip netns exec ns1 ip link set bond_slave_1 master bond0 [1] ip netns exec ns1 ethtool -K bond0 rx-vlan-filter off [2] ip netns exec ns1 ip link add link bond_slave_1 name bond_slave_1.0 type vlan id 0 [3] ip netns exec ns1 ip link add link bond0 name bond0.0 type vlan id 0 [4] ip netns exec ns1 ip link set bond_slave_1 nomaster [5] ip netns exec ns1 ip link del veth2 ip netns del ns1 This is all caused by command [1] turning off the rx-vlan-filter function of bond0. The reason is the same as commit 01f4fd270870 ("bonding: Fix incorrect deletion of ETH_P_8021AD protocol vid from slaves"). Commands [2] [3] add the same vid to slave and master respectively, causing command [4] to empty slave->vlan_info. The following command [5] triggers this problem. To fix this problem, we should add VLAN_FILTER feature checks in vlan_vids_add_by_dev() and vlan_vids_del_by_dev() to prevent incorrect addition or deletion of vlan_vid information. Fixes: 348a1443cc43 ("vlan: introduce functions to do mass addition/deletion of vids by another device") Signed-off-by: Liu Jian <liujian56(a)huawei.com> Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> (cherry picked from commit 01a564bab4876007ce35f312e16797dfe40e4823) Signed-off-by: Liu Jian <liujian56(a)huawei.com> --- net/8021q/vlan_core.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 4f60e86f4b8d3..e92c914316cbd 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -380,6 +380,8 @@ int vlan_vids_add_by_dev(struct net_device *dev, return 0; list_for_each_entry(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; err = vlan_vid_add(dev, vid_info->proto, vid_info->vid); if (err) goto unwind; @@ -390,6 +392,8 @@ int vlan_vids_add_by_dev(struct net_device *dev, list_for_each_entry_continue_reverse(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; vlan_vid_del(dev, vid_info->proto, vid_info->vid); } @@ -409,8 +413,11 @@ void vlan_vids_del_by_dev(struct net_device *dev, if (!vlan_info) return; - list_for_each_entry(vid_info, &vlan_info->vid_list, list) + list_for_each_entry(vid_info, &vlan_info->vid_list, list) { + if (!vlan_hw_filter_capable(by_dev, vid_info->proto)) + continue; vlan_vid_del(dev, vid_info->proto, vid_info->vid); + } } EXPORT_SYMBOL(vlan_vids_del_by_dev); -- 2.34.1

2 1

[PATCH OLK-6.6 0/5] ubi: Enhance fault injection capability for the UBI driver
by ZhaoLong Wang 25 Dec '23

25 Dec '23

CONFIG Dependency CONFIG_MTD=y CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_UBI=m CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_MTD_PARTITIONED_MASTER The existing fault injection capability of UBI is too simple. It uses hard-coded fault probability values and lacks other configurable options. As a result, these interfaces are difficult to use when digging defects in the abnormal path of code and reproducing some problems. The kernel provides a powerful fault injection framework, which provides rich configurable fault injection attributes during runtime. So it can be used to improve the fault injection capability of the UBI driver. This series of patches refactor the existing fault injection interface and add some fault injection types to help testers and developers find potential problems in the code. This series of patches enhance the existing fault injection interface and retain the old debugfs interface, and add some fault injection types to help testers and developers Look for potential problems in the code. ZhaoLong Wang (5): ubi: Use the fault injection framework to enhance the fault injection capability ubi: Split io_failures into write_failure and erase_failure ubi: Add six fault injection type for testing ubi: Reserve sufficient buffer length for the input mask mtd: Add several functions to the fail_function list drivers/mtd/mtdcore.c | 5 + drivers/mtd/ubi/Kconfig | 9 ++ drivers/mtd/ubi/debug.c | 107 ++++++++++++-- drivers/mtd/ubi/debug.h | 304 +++++++++++++++++++++++++++++++++++++--- drivers/mtd/ubi/io.c | 86 +++++++++++- drivers/mtd/ubi/ubi.h | 45 +++--- 6 files changed, 497 insertions(+), 59 deletions(-) -- 2.39.2

2 6

[PATCH OLK-5.10 0/2] kernel: update SP3 OPENEULER_MINOR and introduced OPENEULER_LTS
by Jialin Zhang 25 Dec '23

25 Dec '23

Jialin Zhang (1): kernel: update SP3 OPENEULER_MINOR value to 3 Xie XiuQi (1): openEuler: introduced OPENEULER_LTS to identify LTS Release Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) -- 2.25.1

2 3

[PATCH OLK-5.10 v2 0/2] block: warn once for each partition in bio_check_ro()
by Yu Kuai 25 Dec '23

25 Dec '23

Yu Kuai (2): block: warn once for each partition in bio_check_ro() block: fix kabi broken in struct hd_part block/blk-core.c | 5 +++++ include/linux/genhd.h | 1 + 2 files changed, 6 insertions(+) -- 2.39.2

2 3

[PATCH OLK-6.6 00/17] enable psi in cgroupv1 and introduce
by Lu Jialin 24 Dec '23

24 Dec '23

Chen Wandun (3): psi, tracepoint: introduce tracepoints for psi_memstall_{enter, leave} mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 Haifeng Xu (1): sched/psi: Bail out early from irq time accounting Joseph Qi (2): alinux: introduce psi_v1 boot parameter alinux: psi: using cpuacct_cgrp_id under CONFIG_CGROUP_CPUACCT Lu Jialin (9): psi: update psi irqtime when the irq delta is nozero psi: support irq.pressure under cgroup v1 psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig Xunlei Pang (2): alinux: psi: Support PSI under cgroup v1 alinux: cgroup: Fix task_css_check rcu warnings .../admin-guide/kernel-parameters.txt | 4 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- include/linux/psi.h | 7 + include/linux/psi_types.h | 77 +++ include/linux/sched.h | 1 + include/trace/events/sched.h | 27 ++ init/Kconfig | 20 + kernel/cgroup/cgroup.c | 50 ++ kernel/sched/core.c | 3 +- kernel/sched/cpuacct.c | 28 ++ kernel/sched/fair.c | 6 - kernel/sched/psi.c | 449 +++++++++++++++++- kernel/sched/stats.h | 8 + mm/compaction.c | 2 +- mm/filemap.c | 6 +- mm/memcontrol.c | 12 + mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/readahead.c | 12 +- mm/vmscan.c | 5 +- 22 files changed, 713 insertions(+), 19 deletions(-) -- 2.34.1

2 18

[PATCH OLK-6.6 00/10] arm64: IPI as NMI
by Liao Chen 23 Dec '23

23 Dec '23

With pseudo NMIs support available its possible to configure SGIs to be triggered as pseudo NMIs running in NMI context. And kernel features such as: - NMI backtrace can leverage IPI turned as NMI to get a backtrace of CPU stuck in hard lockup using magic SYSRQ. - kgdb relies on NMI support to round up CPUs which are stuck in hard lockup state with interrupts disabled. This patch-set adds framework to turn an IPI as NMI which can be triggered as a pseudo NMI which in turn invokes registered NMI handlers. After this patch-set we should be able to get a backtrace for a CPU stuck in HARDLOCKUP. Chen Jiahao (1): arm64: Fix the ipi backtrace warning when softlockup Li Zhengyu (1): arm64: Add non nmi ipi backtrace support Sumit Garg (7): arm64: Add framework to turn IPI as NMI irqchip/gic-v3: Enable support for SGIs to act as NMIs arm64: smp: Assign and setup an IPI as NMI nmi: backtrace: Allow runtime arch specific override arm64: ipi_nmi: Add support for NMI backtrace kgdb: Expose default CPUs roundup fallback mechanism arm64: kgdb: Roundup cpus using IPI as NMI Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm/include/asm/irq.h | 2 +- arch/arm/kernel/smp.c | 3 +- arch/arm64/include/asm/irq.h | 6 ++ arch/arm64/include/asm/nmi.h | 17 +++++ arch/arm64/kernel/Makefile | 2 +- arch/arm64/kernel/ipi_nmi.c | 112 +++++++++++++++++++++++++++++++ arch/arm64/kernel/kgdb.c | 18 +++++ arch/arm64/kernel/smp.c | 8 +++ arch/mips/include/asm/irq.h | 2 +- arch/mips/kernel/process.c | 3 +- arch/powerpc/include/asm/irq.h | 2 +- arch/powerpc/kernel/stacktrace.c | 3 +- arch/sparc/include/asm/irq_64.h | 2 +- arch/sparc/kernel/process_64.c | 4 +- arch/x86/include/asm/irq.h | 2 +- arch/x86/kernel/apic/hw_nmi.c | 3 +- drivers/irqchip/irq-gic-v3.c | 29 +++++--- include/linux/kgdb.h | 12 ++++ include/linux/nmi.h | 12 ++-- kernel/debug/debug_core.c | 8 ++- 20 files changed, 222 insertions(+), 28 deletions(-) create mode 100644 arch/arm64/include/asm/nmi.h create mode 100644 arch/arm64/kernel/ipi_nmi.c -- 2.34.1

2 11

[PATCH OLK-6.6 0/1] arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled
by Liao Chen 23 Dec '23

23 Dec '23

arch/arm64/kernel/ipi_nmi.c: In function ¡®ipi_nmi_handler¡¯: arch/arm64/kernel/ipi_nmi.c:54:7: error: implicit declaration of function ¡®kgdb_nmicallback¡¯ [-Werror=implicit-function-declaration] if (!kgdb_nmicallback(cpu, get_irq_regs())) ^~~~~~~~~~~~~~~~ kgbd_nmicallback is only defined when CONFIG_KGDB is set up. Use macro to warp CONFIG_KGDB to address the issue. Xiongfeng Wang (1): arm64: ipi_nmi: fix compile error when CONFIG_KGDB is disabled arch/arm64/kernel/ipi_nmi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) -- 2.34.1

2 2

[PATCH openEuler-1.0-LTS] ipv4: Fix device used for dst_alloc with local routes
by Ziyang Xuan 23 Dec '23

23 Dec '23

From: David Ahern <dsahern(a)kernel.org> mainline inclusion from mainline-v5.13-rc7 commit b87b04f5019e821c8c6c7761f258402e43500a1f category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KNM7 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Oliver reported a use case where deleting a VRF device can hang waiting for the refcnt to drop to 0. The root cause is that the dst is allocated against the VRF device but cached on the loopback device. The use case (added to the selftests) has an implicit VRF crossing due to the ordering of the FIB rules (lookup local is before the l3mdev rule, but the problem occurs even if the FIB rules are re-ordered with local after l3mdev because the VRF table does not have a default route to terminate the lookup). The end result is is that the FIB lookup returns the loopback device as the nexthop, but the ingress device is in a VRF. The mismatch causes the dst alloc against the VRF device but then cached on the loopback. The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu): pick the dst alloc device based the fib lookup result but with checks that the result has a nexthop device (e.g., not an unreachable or prohibit entry). Fixes: f5a0aab84b74 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Reported-by: Oliver Herms <oliver.peter.herms(a)gmail.com> Signed-off-by: David Ahern <dsahern(a)kernel.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/ipv4/route.c Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/ipv4/route.c | 15 +++++++++++++- tools/testing/selftests/net/fib_tests.sh | 25 ++++++++++++++++++++++++ 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 86096e2e43b0..e2408efb6ddf 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1962,6 +1962,19 @@ static int ip_mkroute_input(struct sk_buff *skb, return __mkroute_input(skb, res, in_dev, daddr, saddr, tos); } +/* get device for dst_alloc with local routes */ +static struct net_device *ip_rt_get_dev(struct net *net, + const struct fib_result *res) +{ + struct fib_nh_common *nhc = res->fi ? res->nhc : NULL; + struct net_device *dev = NULL; + + if (nhc) + dev = l3mdev_master_dev_rcu(nhc->nhc_dev); + + return dev ? : net->loopback_dev; +} + /* * NOTE. We drop all the packets that has local source * addresses, because every properly looped back packet @@ -2113,7 +2126,7 @@ out: return err; } } - rth = rt_dst_alloc(l3mdev_master_dev_rcu(dev) ? : net->loopback_dev, + rth = rt_dst_alloc(ip_rt_get_dev(net, res), flags | RTCF_LOCAL, res->type, IN_DEV_CONF_GET(in_dev, NOPOLICY), false, do_cache); if (!rth) diff --git a/tools/testing/selftests/net/fib_tests.sh b/tools/testing/selftests/net/fib_tests.sh index 7d1a7c0dc56a..c9800635eea6 100755 --- a/tools/testing/selftests/net/fib_tests.sh +++ b/tools/testing/selftests/net/fib_tests.sh @@ -1221,12 +1221,37 @@ ipv4_rt_replace() ipv4_rt_replace_mpath } +# checks that cached input route on VRF port is deleted +# when VRF is deleted +ipv4_local_rt_cache() +{ + run_cmd "ip addr add 10.0.0.1/32 dev lo" + run_cmd "ip netns add test-ns" + run_cmd "ip link add veth-outside type veth peer name veth-inside" + run_cmd "ip link add vrf-100 type vrf table 1100" + run_cmd "ip link set veth-outside master vrf-100" + run_cmd "ip link set veth-inside netns test-ns" + run_cmd "ip link set veth-outside up" + run_cmd "ip link set vrf-100 up" + run_cmd "ip route add 10.1.1.1/32 dev veth-outside table 1100" + run_cmd "ip netns exec test-ns ip link set veth-inside up" + run_cmd "ip netns exec test-ns ip addr add 10.1.1.1/32 dev veth-inside" + run_cmd "ip netns exec test-ns ip route add 10.0.0.1/32 dev veth-inside" + run_cmd "ip netns exec test-ns ip route add default via 10.0.0.1" + run_cmd "ip netns exec test-ns ping 10.0.0.1 -c 1 -i 1" + run_cmd "ip link delete vrf-100" + + # if we do not hang test is a success + log_test $? 0 "Cached route removed from VRF port device" +} + ipv4_route_test() { route_setup ipv4_rt_add ipv4_rt_replace + ipv4_local_rt_cache route_cleanup } -- 2.25.1

2 1

[PATCH OLK-5.10 0/2] net: Backport bugfixes from mainline
by Ziyang Xuan 23 Dec '23

23 Dec '23

Backport bugfixes from mainline. Muchun Song (1): tcp: use alloc_large_system_hash() to allocate table_perturb Paolo Abeni (1): udp: skip L4 aggregation for UDP tunnel packets net/ipv4/inet_hashtables.c | 10 ++++++---- net/ipv4/udp_offload.c | 17 ++++++++++------- 2 files changed, 16 insertions(+), 11 deletions(-) -- 2.25.1

2 3

2024

2023

2022

2021

2020

2019

Kernel