- Kernel - mailweb.openeuler.org

[PATCH kernel-4.19 v2] crypto: x86/crc32c-intel - Don't match some Zhaoxin CPUs
by LeoLiu-oc 30 Mar '21

30 Mar '21

The driver crc32c-intel match CPUs supporting X86_FEATURE_XMM4_2. On platforms with Zhaoxin CPUs supporting this X86 feature, when crc32c-intel and crc32c-generic are both registered, system will use crc32c-intel because its .cra_priority is greater than crc32c-generic. When doing lmbench3 Create and Delete file test on partitions with ext4 enabling metadata checksum, found using crc32c-generic driver could get about 20% performance gain than using the driver crc32c-intel on some Zhaoxin CPUs. This case expect to use crc32c-generic driver for these Zhaoxin CPUs to get performance gain, so remove these Zhaoxin CPUs support from crc32c-intel. This patch was submitted to mainline kernel but not accepted by upstream maintainer whose reason is "Then create a BUG flag for it,". We think this is not a CPU bug for Zhaoxin CPUs. So should patch the crc32c driver for Zhaoxin CPUs but not report a BUG. https://lkml.org/lkml/2020/12/11/308 v1->v2: - Fix some coding style issues Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- arch/x86/crypto/crc32c-intel_glue.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/arch/x86/crypto/crc32c-intel_glue.c b/arch/x86/crypto/crc32c-intel_glue.c index 5773e1161072..168bce79bedd 100644 --- a/arch/x86/crypto/crc32c-intel_glue.c +++ b/arch/x86/crypto/crc32c-intel_glue.c @@ -242,8 +242,15 @@ MODULE_DEVICE_TABLE(x86cpu, crc32c_cpu_id); static int __init crc32c_intel_mod_init(void) { + struct cpuinfo_x86 *c = &boot_cpu_data; + if (!x86_match_cpu(crc32c_cpu_id)) return -ENODEV; + + if ((c->x86_vendor == X86_VENDOR_ZHAOXIN || c->x86_vendor == X86_VENDOR_CENTAUR) && + (c->x86 <= 7 && c->x86_model <= 59)) { + return -ENODEV; + } #ifdef CONFIG_X86_64 if (boot_cpu_has(X86_FEATURE_PCLMULQDQ)) { alg.update = crc32c_pcl_intel_update; -- 2.20.1

2 1

[PATCH kernel-4.19 v2] ata: sata_zhaoxin: Add support for Zhaoxin Serial ATA
by LeoLiu-oc 30 Mar '21

30 Mar '21

Add Zhaoxin Serial ATA support for Zhaoxin CPUs. The patch is scheduled to be submitted to the kernel mainline in 2021. v1->v2: - Fix some coding style issues Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/ata/Kconfig | 8 + drivers/ata/Makefile | 1 + drivers/ata/sata_zhaoxin.c | 384 +++++++++++++++++++++++++++++++++++++ 3 files changed, 393 insertions(+) create mode 100644 drivers/ata/sata_zhaoxin.c diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 99698d7fe..78a6338d0 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -494,6 +494,14 @@ config SATA_VITESSE If unsure, say N. +config SATA_ZHAOXIN + tristate "ZhaoXin SATA support" + depends on PCI + help + This option enables support for ZhaoXin Serial ATA. + + If unsure, say N. + comment "PATA SFF controllers with BMDMA" config PATA_ALI diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d21cdd83f..2d9220311 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_SATA_SIL) += sata_sil.o obj-$(CONFIG_SATA_SIS) += sata_sis.o obj-$(CONFIG_SATA_SVW) += sata_svw.o obj-$(CONFIG_SATA_ULI) += sata_uli.o +obj-$(CONFIG_SATA_ZHAOXIN) += sata_zhaoxin.o obj-$(CONFIG_SATA_VIA) += sata_via.o obj-$(CONFIG_SATA_VITESSE) += sata_vsc.o diff --git a/drivers/ata/sata_zhaoxin.c b/drivers/ata/sata_zhaoxin.c new file mode 100644 index 000000000..f4a694355 --- /dev/null +++ b/drivers/ata/sata_zhaoxin.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * sata_zhaoxin.c - ZhaoXin Serial ATA controllers + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> + +#define DRV_NAME "sata_zx" +#define DRV_VERSION "2.6.1" + +enum board_ids_enum { + cnd001, +}; + +enum { + SATA_CHAN_ENAB = 0x40, /* SATA channel enable */ + SATA_INT_GATE = 0x41, /* SATA interrupt gating */ + SATA_NATIVE_MODE = 0x42, /* Native mode enable */ + PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */ + PATA_PIO_TIMING = 0xAB, /* PATA timing register */ + + PORT0 = (1 << 1), + PORT1 = (1 << 0), + ALL_PORTS = PORT0 | PORT1, + + NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4), + + SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */ +}; + +static int szx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); +static int cnd001_scr_read(struct ata_link *link, unsigned int scr, u32 *val); +static int cnd001_scr_write(struct ata_link *link, unsigned int scr, u32 val); +static int szx_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); + +static void szx_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); + +static const struct pci_device_id szx_pci_tbl[] = { + { PCI_VDEVICE(ZHAOXIN, 0x9002), cnd001 }, + { PCI_VDEVICE(ZHAOXIN, 0x9003), cnd001 }, + + { } /* terminate list */ +}; + +static struct pci_driver szx_pci_driver = { + .name = DRV_NAME, + .id_table = szx_pci_tbl, + .probe = szx_init_one, +#ifdef CONFIG_PM_SLEEP + .suspend = ata_pci_device_suspend, + .resume = ata_pci_device_resume, +#endif + .remove = ata_pci_remove_one, +}; + +static struct scsi_host_template szx_sht = { + ATA_BMDMA_SHT(DRV_NAME), +}; + +static struct ata_port_operations szx_base_ops = { + .inherits = &ata_bmdma_port_ops, + .sff_tf_load = szx_tf_load, +}; + +static struct ata_port_operations cnd001_ops = { + .inherits = &szx_base_ops, + .hardreset = szx_hardreset, + .scr_read = cnd001_scr_read, + .scr_write = cnd001_scr_write, +}; + +static struct ata_port_info cnd001_port_info = { + .flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS, + .pio_mask = ATA_PIO4, + .mwdma_mask = ATA_MWDMA2, + .udma_mask = ATA_UDMA6, + .port_ops = &cnd001_ops, +}; + + +static int szx_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int rc; + + rc = sata_std_hardreset(link, class, deadline); + if (!rc || rc == -EAGAIN) { + struct ata_port *ap = link->ap; + int pmp = link->pmp; + int tmprc; + + if (pmp) { + ap->ops->sff_dev_select(ap, pmp); + tmprc = ata_sff_wait_ready(&ap->link, deadline); + } else { + tmprc = ata_sff_wait_ready(link, deadline); + } + if (tmprc) + ata_link_err(link, "COMRESET failed for wait (errno=%d)\n", + rc); + else + ata_link_err(link, "wait for bsy success\n"); + + ata_link_err(link, "COMRESET success (errno=%d) ap=%d link %d\n", + rc, link->ap->port_no, link->pmp); + } else { + ata_link_err(link, "COMRESET failed (errno=%d) ap=%d link %d\n", + rc, link->ap->port_no, link->pmp); + } + return rc; +} + +static int cnd001_scr_read(struct ata_link *link, unsigned int scr, u32 *val) +{ + static const u8 ipm_tbl[] = { 1, 2, 6, 0 }; + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + u8 raw; + + switch (scr) { + case SCR_STATUS: + pci_read_config_byte(pdev, 0xA0 + slot, &raw); + + /* read the DET field, bit0 and 1 of the config byte */ + v |= raw & 0x03; + + /* read the SPD field, bit4 of the configure byte */ + v |= raw & 0x30; + + /* read the IPM field, bit2 and 3 of the config byte */ + v |= ((ipm_tbl[(raw >> 2) & 0x3])<<8); + break; + + case SCR_ERROR: + /* devices other than 5287 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x9002 && pdev->device != 0x9003); + pci_write_config_byte(pdev, 0x42, slot); + pci_read_config_dword(pdev, 0xA8, &v); + break; + + case SCR_CONTROL: + pci_read_config_byte(pdev, 0xA4 + slot, &raw); + + /* read the DET field, bit0 and bit1 */ + v |= ((raw & 0x02) << 1) | (raw & 0x01); + + /* read the IPM field, bit2 and bit3 */ + v |= ((raw >> 2) & 0x03) << 8; + + break; + + default: + return -EINVAL; + } + + *val = v; + return 0; +} + +static int cnd001_scr_write(struct ata_link *link, unsigned int scr, u32 val) +{ + struct pci_dev *pdev = to_pci_dev(link->ap->host->dev); + int slot = 2 * link->ap->port_no + link->pmp; + u32 v = 0; + + WARN_ON(pdev == NULL); + + switch (scr) { + case SCR_ERROR: + /* devices 0x9002 uses 0xA8 as base */ + WARN_ON(pdev->device != 0x9002 && pdev->device != 0x9003); + pci_write_config_byte(pdev, 0x42, slot); + pci_write_config_dword(pdev, 0xA8, val); + return 0; + + case SCR_CONTROL: + /* set the DET field */ + v |= ((val & 0x4) >> 1) | (val & 0x1); + + /* set the IPM field */ + v |= ((val >> 8) & 0x3) << 2; + + + pci_write_config_byte(pdev, 0xA4 + slot, v); + + + return 0; + + default: + return -EINVAL; + } +} + + +/** + * szx_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of zx chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void szx_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + +static const unsigned int szx_bar_sizes[] = { + 8, 4, 8, 4, 16, 256 +}; + +static const unsigned int cnd001_bar_sizes0[] = { + 8, 4, 8, 4, 16, 0 +}; + +static const unsigned int cnd001_bar_sizes1[] = { + 8, 4, 0, 0, 16, 0 +}; + +static int cnd001_prepare_host(struct pci_dev *pdev, struct ata_host **r_host) +{ + const struct ata_port_info *ppi0[] = { + &cnd001_port_info, NULL + }; + const struct ata_port_info *ppi1[] = { + &cnd001_port_info, &ata_dummy_port_info + }; + struct ata_host *host; + int i, rc; + + if (pdev->device == 0x9002) + rc = ata_pci_bmdma_prepare_host(pdev, ppi0, &host); + else if (pdev->device == 0x9003) + rc = ata_pci_bmdma_prepare_host(pdev, ppi1, &host); + else + rc = -EINVAL; + + if (rc) + return rc; + + *r_host = host; + + /* cnd001 9002 hosts four sata ports as M/S of the two channels */ + /* cnd001 9003 hosts two sata ports as M/S of the one channel */ + for (i = 0; i < host->n_ports; i++) + ata_slave_link_init(host->ports[i]); + + return 0; +} + +static void szx_configure(struct pci_dev *pdev, int board_id) +{ + u8 tmp8; + + pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8); + dev_info(&pdev->dev, "routed to hard irq line %d\n", + (int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f); + + /* make sure SATA channels are enabled */ + pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n", + (int)tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8); + } + + /* make sure interrupts for each channel sent to us */ + pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8); + if ((tmp8 & ALL_PORTS) != ALL_PORTS) { + dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n", + (int) tmp8); + tmp8 |= ALL_PORTS; + pci_write_config_byte(pdev, SATA_INT_GATE, tmp8); + } + + /* make sure native mode is enabled */ + pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8); + if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) { + dev_dbg(&pdev->dev, + "enabling SATA channel native mode (0x%x)\n", + (int) tmp8); + tmp8 |= NATIVE_MODE_ALL; + pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8); + } +} + +static int szx_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + unsigned int i; + int rc; + struct ata_host *host = NULL; + int board_id = (int) ent->driver_data; + const unsigned int *bar_sizes; + int legacy_mode = 0; + + ata_print_version_once(&pdev->dev, DRV_VERSION); + + if (pdev->device == 0x9002 || pdev->device == 0x9003) { + if ((pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { + u8 tmp8, mask; + + /* TODO: What if one channel is in native mode ... */ + pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); + mask = (1 << 2) | (1 << 0); + if ((tmp8 & mask) != mask) + legacy_mode = 1; + } + if (legacy_mode) + return -EINVAL; + } + + rc = pcim_enable_device(pdev); + if (rc) + return rc; + + if (board_id == cnd001 && pdev->device == 0x9002) + bar_sizes = &cnd001_bar_sizes0[0]; + else if (board_id == cnd001 && pdev->device == 0x9003) + bar_sizes = &cnd001_bar_sizes1[0]; + else + bar_sizes = &szx_bar_sizes[0]; + + for (i = 0; i < ARRAY_SIZE(szx_bar_sizes); i++) { + if ((pci_resource_start(pdev, i) == 0) || + (pci_resource_len(pdev, i) < bar_sizes[i])) { + if (bar_sizes[i] == 0) + continue; + + dev_err(&pdev->dev, + "invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n", + i, + (unsigned long long)pci_resource_start(pdev, i), + (unsigned long long)pci_resource_len(pdev, i)); + + return -ENODEV; + } + } + + switch (board_id) { + case cnd001: + rc = cnd001_prepare_host(pdev, &host); + break; + default: + rc = -EINVAL; + } + if (rc) + return rc; + + szx_configure(pdev, board_id); + + pci_set_master(pdev); + return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt, + IRQF_SHARED, &szx_sht); +} + +module_pci_driver(szx_pci_driver); + +MODULE_AUTHOR("Yanchen:YanchenSun@zhaoxin.com"); +MODULE_DESCRIPTION("SCSI low-level driver for ZX SATA controllers"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, szx_pci_tbl); +MODULE_VERSION(DRV_VERSION); -- 2.20.1

2 1

【Meeting Notice】openEuler kernel sig meeting Time: 2021-04-02 14:00-16:00
by Meeting Book 30 Mar '21

30 Mar '21

2 1

[PATCH kernel-4.19 v2] USB:Fix kernel NULL pointer when unbind UHCI form vfio-pci
by LeoLiuoc 29 Mar '21

29 Mar '21

This bug is found in Zhaoxin platform, but it's a commom code bug. Fail sequence: step1: Unbind UHCI controller from native driver; step2: Bind UHCI controller to vfio-pci, which will put UHCI controller in one vfio group's device list and set UHCI's dev->driver_data to struct vfio-pci(for UHCI) step3: Unbind EHCI controller from native driver, will try to tell UHCI native driver that "I'm removed by set companion_hcd->self.hs_companion to NULL. However, companion_hcd get from UHCI's dev->driver_data that has modified by vfio-pci already.So, the vfio-pci structure will be damaged! step4: Bind EHCI controller to vfio-pci driver, which will put EHCI controller in the same vfio group as UHCI controller; ... ... step5: Unbind UHCI controller from vfio-pci, which will delete UHCI from vfio group' device list that has been damaged in step 3. So,delete operation can random result into a NULL pointer dereference with the below stack dump. step6: Bind UHCI controller to native driver; step7: Unbind EHCI controller from vfio-pci, which will try to remove EHCI controller from the vfio group; step8: Bind EHCI controller to native driver; [ 929.114641] uhci_hcd 0000:00:10.0: remove, state 1 [ 929.114652] usb usb1: USB disconnect, device number 1 [ 929.114655] usb 1-1: USB disconnect, device number 2 [ 929.270313] usb 1-2: USB disconnect, device number 3 [ 929.318404] uhci_hcd 0000:00:10.0: USB bus 1 deregistered [ 929.343029] uhci_hcd 0000:00:10.1: remove, state 4 [ 929.343045] usb usb3: USB disconnect, device number 1 [ 929.343685] uhci_hcd 0000:00:10.1: USB bus 3 deregistered [ 929.369087] ehci-pci 0000:00:10.7: remove, state 4 [ 929.369102] usb usb4: USB disconnect, device number 1 [ 929.370325] ehci-pci 0000:00:10.7: USB bus 4 deregistered [ 932.398494] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 932.398496] PGD 42a67d067 P4D 42a67d067 PUD 42a65f067 PMD 0 [ 932.398502] Oops: 0002 [#2] SMP NOPTI [ 932.398505] CPU: 2 PID: 7824 Comm: vfio_unbind.sh Tainted: P D 4.19.65-2020051917-rainos #1 [ 932.398506] Hardware name: Shanghai Zhaoxin Semiconductor Co., Ltd. HX002EH/HX002EH, BIOS HX002EH0_01_R480_R_200408 04/08/2020 [ 932.398513] RIP: 0010:vfio_device_put+0x31/0xa0 [vfio] [ 932.398515] Code: 89 e5 41 54 53 4c 8b 67 18 48 89 fb 49 8d 74 24 30 e8 e3 0e f3 de 84 c0 74 67 48 8b 53 20 48 8b 43 28 48 8b 7b 18 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 43 20 48 b8 00 02 00 [ 932.398516] RSP: 0018:ffffbbfd04cffc18 EFLAGS: 00010202 [ 932.398518] RAX: 0000000000000000 RBX: ffff92c7ea717880 RCX: 0000000000000000 [ 932.398519] RDX: ffff92c7ea713620 RSI: ffff92c7ea713630 RDI: ffff92c7ea713600 [ 932.398521] RBP: ffffbbfd04cffc28 R08: ffff92c7f02a8080 R09: ffff92c7efc03980 [ 932.398522] R10: ffffbbfd04cff9a8 R11: 0000000000000000 R12: ffff92c7ea713600 [ 932.398523] R13: ffff92c7ed8bb0a8 R14: ffff92c7ea717880 R15: 0000000000000000 [ 932.398525] FS: 00007f3031500740(0000) GS:ffff92c7f0280000(0000) knlGS:0000000000000000 [ 932.398526] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 932.398527] CR2: 0000000000000000 CR3: 0000000428626004 CR4: 0000000000160ee0 [ 932.398528] Call Trace: [ 932.398534] vfio_del_group_dev+0xe8/0x2a0 [vfio] [ 932.398539] ? __blocking_notifier_call_chain+0x52/0x60 [ 932.398542] ? do_wait_intr_irq+0x90/0x90 [ 932.398546] ? iommu_bus_notifier+0x75/0x100 [ 932.398551] vfio_pci_remove+0x20/0xa0 [vfio_pci] [ 932.398554] pci_device_remove+0x3e/0xc0 [ 932.398557] device_release_driver_internal+0x17a/0x240 [ 932.398560] device_release_driver+0x12/0x20 [ 932.398561] unbind_store+0xee/0x180 [ 932.398564] drv_attr_store+0x27/0x40 [ 932.398567] sysfs_kf_write+0x3c/0x50 [ 932.398568] kernfs_fop_write+0x125/0x1a0 [ 932.398572] __vfs_write+0x3a/0x190 [ 932.398575] ? apparmor_file_permission+0x1a/0x20 [ 932.398577] ? security_file_permission+0x3b/0xc0 [ 932.398581] ? _cond_resched+0x1a/0x50 [ 932.398582] vfs_write+0xb8/0x1b0 [ 932.398584] ksys_write+0x5c/0xe0 [ 932.398586] __x64_sys_write+0x1a/0x20 [ 932.398589] do_syscall_64+0x5a/0x110 [ 932.398592] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Using virt-manager/qemu to boot guest os, we can see the same fail sequence! Fix this by determine whether the PCI Driver of the USB controller is a kernel native driver. If not, do not let it modify UHCI's dev->driver_data. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/usb/core/hcd-pci.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 7537681355f6..c3cddaab708d 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -49,6 +49,7 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, struct pci_dev *companion; struct usb_hcd *companion_hcd; unsigned int slot = PCI_SLOT(pdev->devfn); + struct pci_driver *drv; /* * Iterate through other PCI functions in the same slot. @@ -61,6 +62,15 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, PCI_SLOT(companion->devfn) != slot) continue; + drv = companion->driver; + if (!drv) + continue; + + if (strncmp(drv->name, "uhci_hcd", sizeof("uhci_hcd") - 1) && + strncmp(drv->name, "ooci_hcd", sizeof("uhci_hcd") - 1) && + strncmp(drv->name, "ehci_hcd", sizeof("uhci_hcd") - 1)) + continue; + /* * Companion device should be either UHCI,OHCI or EHCI host * controller, otherwise skip. -- 2.20.1

1 0

[PATCH kernel-4.19] xhci: fix issue with some USB device cannot recognize
by LeoLiu-oc 29 Mar '21

29 Mar '21

During polling phase after some device plug in type-c port, if polling timeout three times, link state will goto inactive. However this event not handle by the driver, which will cause device can't be recognized. To fix this issue, if port link state detected in inactive, record this event that will trigger a warm reset to bring device identified by driver. The patch is scheduled to be submitted to the kernel mainline in 2021. Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/usb/core/hub.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index fa28f23a4a33..302caa1ea345 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1135,6 +1135,11 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) USB_SS_PORT_LS_POLLING)) need_debounce_delay = true; + /* Make sure a warm-reset request is handled by port_event */ + if (type == HUB_RESUME && + hub_port_warm_reset_required(hub, port1, portstatus)) + set_bit(port1, hub->event_bits); + /* Clear status-change flags; we'll debounce later */ if (portchange & USB_PORT_STAT_C_CONNECTION) { need_debounce_delay = true; -- 2.20.1

3 5

[PATCH kernel-4.19] arm64/mpam: fix a possible deadlock in mpam_enable
by Zhang Ming 29 Mar '21

29 Mar '21

openEuler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I3D58V CVE: NA ---------------------------------- No unlock operation is performed on the mpam_devices_lock before the return statement, which may lead to a deadlock. Signed-off-by: Zhang Ming <154842638(a)qq.com> Reported-by: Jian Cheng <cj.chengjian(a)huawei.com> Suggested-by: Jian Cheng <cj.chengjian(a)huawei.com> --- arch/arm64/kernel/mpam/mpam_device.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/mpam/mpam_device.c b/arch/arm64/kernel/mpam/mpam_device.c index fc7aa1ae0b82..c08ff933db5a 100644 --- a/arch/arm64/kernel/mpam/mpam_device.c +++ b/arch/arm64/kernel/mpam/mpam_device.c @@ -560,8 +560,10 @@ static void __init mpam_enable(struct work_struct *work) mutex_lock(&mpam_devices_lock); mpam_enable_squash_features(); err = mpam_allocate_config(); - if (err) + if (err) { + mutex_unlock(&mpam_devices_lock); return; + } mutex_unlock(&mpam_devices_lock); mpam_enable_irqs(); -- 2.25.1

4 3

订阅
by LeoLiuoc 29 Mar '21

29 Mar '21

2 1

help
by LeoLiuoc 29 Mar '21

29 Mar '21

help

1 0

[PATCH kernel-4.19] USB:Fix kernel NULL pointer when unbind UHCI form vfio-pci
by LeoLiu-oc 29 Mar '21

29 Mar '21

This bug is found in Zhaoxin platform, but it's a commom code bug. Fail sequence: step1: Unbind UHCI controller from native driver; step2: Bind UHCI controller to vfio-pci, which will put UHCI controller in one vfio group's device list and set UHCI's dev->driver_data to struct vfio-pci(for UHCI) step3: Unbind EHCI controller from native driver, will try to tell UHCI native driver that "I'm removed by set companion_hcd->self.hs_companion to NULL. However, companion_hcd get from UHCI's dev->driver_data that has modified by vfio-pci already.So, the vfio-pci structure will be damaged! step4: Bind EHCI controller to vfio-pci driver, which will put EHCI controller in the same vfio group as UHCI controller; ... ... step5: Unbind UHCI controller from vfio-pci, which will delete UHCI from vfio group' device list that has been damaged in step 3. So,delete operation can random result into a NULL pointer dereference with the below stack dump. step6: Bind UHCI controller to native driver; step7: Unbind EHCI controller from vfio-pci, which will try to remove EHCI controller from the vfio group; step8: Bind EHCI controller to native driver; [ 929.114641] uhci_hcd 0000:00:10.0: remove, state 1 [ 929.114652] usb usb1: USB disconnect, device number 1 [ 929.114655] usb 1-1: USB disconnect, device number 2 [ 929.270313] usb 1-2: USB disconnect, device number 3 [ 929.318404] uhci_hcd 0000:00:10.0: USB bus 1 deregistered [ 929.343029] uhci_hcd 0000:00:10.1: remove, state 4 [ 929.343045] usb usb3: USB disconnect, device number 1 [ 929.343685] uhci_hcd 0000:00:10.1: USB bus 3 deregistered [ 929.369087] ehci-pci 0000:00:10.7: remove, state 4 [ 929.369102] usb usb4: USB disconnect, device number 1 [ 929.370325] ehci-pci 0000:00:10.7: USB bus 4 deregistered [ 932.398494] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 932.398496] PGD 42a67d067 P4D 42a67d067 PUD 42a65f067 PMD 0 [ 932.398502] Oops: 0002 [#2] SMP NOPTI [ 932.398505] CPU: 2 PID: 7824 Comm: vfio_unbind.sh Tainted: P D 4.19.65-2020051917-rainos #1 [ 932.398506] Hardware name: Shanghai Zhaoxin Semiconductor Co., Ltd. HX002EH/HX002EH, BIOS HX002EH0_01_R480_R_200408 04/08/2020 [ 932.398513] RIP: 0010:vfio_device_put+0x31/0xa0 [vfio] [ 932.398515] Code: 89 e5 41 54 53 4c 8b 67 18 48 89 fb 49 8d 74 24 30 e8 e3 0e f3 de 84 c0 74 67 48 8b 53 20 48 8b 43 28 48 8b 7b 18 48 89 42 08 <48> 89 10 48 b8 00 01 00 00 00 00 ad de 48 89 43 20 48 b8 00 02 00 [ 932.398516] RSP: 0018:ffffbbfd04cffc18 EFLAGS: 00010202 [ 932.398518] RAX: 0000000000000000 RBX: ffff92c7ea717880 RCX: 0000000000000000 [ 932.398519] RDX: ffff92c7ea713620 RSI: ffff92c7ea713630 RDI: ffff92c7ea713600 [ 932.398521] RBP: ffffbbfd04cffc28 R08: ffff92c7f02a8080 R09: ffff92c7efc03980 [ 932.398522] R10: ffffbbfd04cff9a8 R11: 0000000000000000 R12: ffff92c7ea713600 [ 932.398523] R13: ffff92c7ed8bb0a8 R14: ffff92c7ea717880 R15: 0000000000000000 [ 932.398525] FS: 00007f3031500740(0000) GS:ffff92c7f0280000(0000) knlGS:0000000000000000 [ 932.398526] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 932.398527] CR2: 0000000000000000 CR3: 0000000428626004 CR4: 0000000000160ee0 [ 932.398528] Call Trace: [ 932.398534] vfio_del_group_dev+0xe8/0x2a0 [vfio] [ 932.398539] ? __blocking_notifier_call_chain+0x52/0x60 [ 932.398542] ? do_wait_intr_irq+0x90/0x90 [ 932.398546] ? iommu_bus_notifier+0x75/0x100 [ 932.398551] vfio_pci_remove+0x20/0xa0 [vfio_pci] [ 932.398554] pci_device_remove+0x3e/0xc0 [ 932.398557] device_release_driver_internal+0x17a/0x240 [ 932.398560] device_release_driver+0x12/0x20 [ 932.398561] unbind_store+0xee/0x180 [ 932.398564] drv_attr_store+0x27/0x40 [ 932.398567] sysfs_kf_write+0x3c/0x50 [ 932.398568] kernfs_fop_write+0x125/0x1a0 [ 932.398572] __vfs_write+0x3a/0x190 [ 932.398575] ? apparmor_file_permission+0x1a/0x20 [ 932.398577] ? security_file_permission+0x3b/0xc0 [ 932.398581] ? _cond_resched+0x1a/0x50 [ 932.398582] vfs_write+0xb8/0x1b0 [ 932.398584] ksys_write+0x5c/0xe0 [ 932.398586] __x64_sys_write+0x1a/0x20 [ 932.398589] do_syscall_64+0x5a/0x110 [ 932.398592] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Using virt-manager/qemu to boot guest os, we can see the same fail sequence! Fix this by check for UHCI driver loaded or not before modifiy UHCI's dev->driver_data, which will happen in ehci native driver probe/remove. This patch was submitted to mainline kernel but not accepted by upstream maintainer whose reason is "Given that it's currently needed in only one place, it seems reasonable to leave this as a "gentlemen's agreement" in userspace for the time being instead of adding it to the kernel." We think the kernel driver should fix this bug regardless of userspaces behavior. https://lkml.org/lkml/2020/7/22/493 Signed-off-by: LeoLiu-oc <LeoLiu-oc(a)zhaoxin.com> --- drivers/usb/core/hcd-pci.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 7537681355f6..57ac942acf12 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -34,6 +34,8 @@ static DECLARE_RWSEM(companions_rwsem); #define CL_OHCI PCI_CLASS_SERIAL_USB_OHCI #define CL_EHCI PCI_CLASS_SERIAL_USB_EHCI +#define PCI_DEV_DRV_FLAG 2 + static inline int is_ohci_or_uhci(struct pci_dev *pdev) { return pdev->class == CL_OHCI || pdev->class == CL_UHCI; @@ -69,6 +71,9 @@ static void for_each_companion(struct pci_dev *pdev, struct usb_hcd *hcd, companion->class != CL_EHCI) continue; + if (!(companion->priv_flags & PCI_DEV_DRV_FLAG)) + continue; + companion_hcd = pci_get_drvdata(companion); if (!companion_hcd || !companion_hcd->self.root_hub) continue; @@ -253,6 +258,7 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); + dev->priv_flags |= PCI_DEV_DRV_FLAG; /* Note: dev_set_drvdata must be called while holding the rwsem */ if (dev->class == CL_EHCI) { @@ -325,6 +331,7 @@ void usb_hcd_pci_remove(struct pci_dev *dev) local_irq_disable(); usb_hcd_irq(0, hcd); local_irq_enable(); + dev->priv_flags &= ~PCI_DEV_DRV_FLAG; /* Note: dev_set_drvdata must be called while holding the rwsem */ if (dev->class == CL_EHCI) { -- 2.20.1

3 4

[PATCH openEuler-1.0-LTS 00/16] bugfix for openEuler 20.03 @20210329
by Cheng Jian 29 Mar '21

29 Mar '21

bugfix for openEuler 20.03 @20210329 *** BLURB HERE *** Dan Carpenter (2): net/x25: prevent a couple of overflows staging: rtl8188eu: prevent ->ssid overflow in rtw_wx_set_scan() Dave Airlie (1): drm/ttm/nouveau: don't call tt destroy callback on alloc failure. Filipe Manana (1): btrfs: fix race when cloning extent buffer during rewind of an old root Kan Liang (1): perf/x86/intel: Fix a crash caused by zero PEBS status Li ZhiGang (1): staging: TCM: add GMJS(Nationz Tech) TCM driver. Liu Shixin (1): mm/vmscan: fix uncleaned mem_cgroup_uncharge Lu Jialin (1): cgroup: Fix kabi broken by files_cgroup introduced Piotr Krysiuk (2): bpf: Prohibit alu ops for pointer types not defining ptr_limit bpf: Fix off-by-one for area size in creating mask to left Tyrel Datwyler (1): PCI: rpadlpar: Fix potential drc_name corruption in store functions Yang Yingliang (1): config: enable config TXGBE by default Zhang Ming (1): arm64/mpam: fix a possible deadlock in mpam_enable Zhen Lei (1): config: arm64: build TCM driver to modules by default zhenpengzheng (2): net: txgbe: Add support for Netswift 10G NIC x86/config: Set CONFIG_TXGBE=m by default arch/arm64/configs/hulk_defconfig | 2 + arch/arm64/configs/openeuler_defconfig | 3 + arch/arm64/kernel/mpam/mpam_device.c | 4 +- arch/x86/configs/openeuler_defconfig | 2 + arch/x86/events/intel/ds.c | 2 +- drivers/gpu/drm/nouveau/nouveau_sgdma.c | 9 +- drivers/gpu/drm/ttm/ttm_tt.c | 3 - drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/netswift/Kconfig | 20 + drivers/net/ethernet/netswift/Makefile | 6 + drivers/net/ethernet/netswift/txgbe/Kconfig | 13 + drivers/net/ethernet/netswift/txgbe/Makefile | 11 + drivers/net/ethernet/netswift/txgbe/txgbe.h | 1260 +++ .../net/ethernet/netswift/txgbe/txgbe_bp.c | 875 ++ .../net/ethernet/netswift/txgbe/txgbe_bp.h | 41 + .../net/ethernet/netswift/txgbe/txgbe_dcb.h | 30 + .../ethernet/netswift/txgbe/txgbe_ethtool.c | 3381 +++++++ .../net/ethernet/netswift/txgbe/txgbe_hw.c | 7072 +++++++++++++++ .../net/ethernet/netswift/txgbe/txgbe_hw.h | 264 + .../net/ethernet/netswift/txgbe/txgbe_lib.c | 959 ++ .../net/ethernet/netswift/txgbe/txgbe_main.c | 8045 +++++++++++++++++ .../net/ethernet/netswift/txgbe/txgbe_mbx.c | 399 + .../net/ethernet/netswift/txgbe/txgbe_mbx.h | 171 + .../net/ethernet/netswift/txgbe/txgbe_mtd.c | 1366 +++ .../net/ethernet/netswift/txgbe/txgbe_mtd.h | 1540 ++++ .../net/ethernet/netswift/txgbe/txgbe_param.c | 1191 +++ .../net/ethernet/netswift/txgbe/txgbe_phy.c | 1014 +++ .../net/ethernet/netswift/txgbe/txgbe_phy.h | 190 + .../net/ethernet/netswift/txgbe/txgbe_ptp.c | 884 ++ .../net/ethernet/netswift/txgbe/txgbe_type.h | 3213 +++++++ drivers/pci/hotplug/rpadlpar_sysfs.c | 14 +- drivers/staging/Kconfig | 2 + drivers/staging/Makefile | 1 + drivers/staging/gmjstcm/Kconfig | 21 + drivers/staging/gmjstcm/Makefile | 3 + drivers/staging/gmjstcm/tcm.c | 949 ++ drivers/staging/gmjstcm/tcm.h | 122 + drivers/staging/gmjstcm/tcm_tis_spi.c | 847 ++ .../staging/rtl8188eu/os_dep/ioctl_linux.c | 6 +- fs/btrfs/ctree.c | 2 + include/linux/cgroup_subsys.h | 2 + kernel/bpf/verifier.c | 20 +- kernel/cgroup/cgroup.c | 6 + mm/vmscan.c | 1 - net/x25/af_x25.c | 6 +- 46 files changed, 33942 insertions(+), 32 deletions(-) create mode 100644 drivers/net/ethernet/netswift/Kconfig create mode 100644 drivers/net/ethernet/netswift/Makefile create mode 100644 drivers/net/ethernet/netswift/txgbe/Kconfig create mode 100644 drivers/net/ethernet/netswift/txgbe/Makefile create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_bp.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_bp.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_dcb.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_ethtool.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_hw.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_hw.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_lib.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_main.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_mbx.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_mbx.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_mtd.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_mtd.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_param.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_phy.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_phy.h create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_ptp.c create mode 100644 drivers/net/ethernet/netswift/txgbe/txgbe_type.h create mode 100644 drivers/staging/gmjstcm/Kconfig create mode 100644 drivers/staging/gmjstcm/Makefile create mode 100644 drivers/staging/gmjstcm/tcm.c create mode 100644 drivers/staging/gmjstcm/tcm.h create mode 100644 drivers/staging/gmjstcm/tcm_tis_spi.c -- 2.25.1

1 16

2025

2024

2023

2022

2021

2020

2019

Kernel