- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10 0/1] CVE-2026-74549
by Yongqiang Liu 07 Sep '26

07 Sep '26

Guenter Roeck (1): hwmon: (nct6775-core) Prevent access to unsupported weight registers drivers/hwmon/nct6775.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) -- 2.43.0

2 2

[PATCH OLK-6.6 0/1] CVE-2026-72397
by Yongqiang Liu 07 Sep '26

07 Sep '26

Abdurrahman Hussain (1): hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() drivers/hwmon/pmbus/pmbus_core.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) -- 2.43.0

2 2

[PATCH OLK-6.6 0/1] CVE-2026-72397
by Yongqiang Liu 07 Sep '26

07 Sep '26

Abdurrahman Hussain (1): hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() drivers/hwmon/pmbus/pmbus_core.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) -- 2.43.0

2 2

[PATCH OLK-5.10 0/1] CVE-2026-72397
by Yongqiang Liu 07 Sep '26

07 Sep '26

Abdurrahman Hussain (1): hwmon: (pmbus/core) honor vrm_version in pmbus_data2reg_vid() drivers/hwmon/pmbus/pmbus_core.c | 21 ++++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-) -- 2.43.0

2 2

[PATCH OLK-6.6 0/9] nbd: boost nbd setup
by Yang Erkun 07 Sep '26

07 Sep '26

Drop local patchset, using mainline pathset to do the same thing. Yang Erkun (9): Revert "nbd: remove queue freeze in nbd_add_socket" Revert "nbd: remove redundant num_connections boundary checks" Revert "nbd: replace socks pointer array with xarray" Revert "nbd: simplify find_fallback() by removing redundant logic" nbd: disallow NBD_SET_SOCK on an active device nbd: remove queue freeze in nbd_add_socket nbd: factor out a nbd_genl_foreach_sock nbd: remove queue freeze for newly created nbd from netlink path nbd: add pre_defined_connections module parameter for pre-created devices drivers/block/nbd.c | 350 ++++++++++++++++++++++---------------------- 1 file changed, 176 insertions(+), 174 deletions(-) -- 2.52.0

2 10

[PATCH OLK-6.6 00/16] backport minios part4 patches from linux mainline
by Qinxin Xia 07 Sep '26

07 Sep '26

From: Hongye Lin <linhongye(a)h-partners.com> mainline inclusion category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8904 ---------------------------------------------------------------------- backport minios part4 patches from linux mainline Mark Brown (6): arm64/sysreg: Update HCRX_EL2 definition for DDI0601 2023-09 arm64/fpsimd: Enable host kernel access to FPMR arm64/fpsimd: Support FEAT_FPMR arm64/signal: Add FPMR signal handling arm64/ptrace: Expose FPMR via ptrace arm64/fpsimd: Don't corrupt FPMR when streaming mode changes Mark Rutland (7): arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR arm64/fpsimd: Add fpsimd_save_and_flush_current_state() arm64/fpsimd: Reset FPMR upon exec() arm64/fpsimd: signal32: Always save+flush state early arm64/fpsimd: signal: Always save+flush state early arm64/fpsimd: Avoid warning when sve_to_fpsimd() is unused arm64/fpsimd: Do not discard modified SVE state Qinxin Xia (1): Add support "arm64.nocnp" for start option arch/arm64/include/asm/cpufeature.h | 6 ++ arch/arm64/include/asm/el2_setup.h | 2 +- arch/arm64/include/asm/fpsimd.h | 7 +- arch/arm64/include/asm/kvm_arm.h | 1 - arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/include/asm/processor.h | 4 + arch/arm64/include/asm/signal_common.h | 20 ++++- arch/arm64/include/uapi/asm/sigcontext.h | 8 ++ arch/arm64/kernel/cpufeature.c | 13 ++- arch/arm64/kernel/entry-common.c | 50 ++++++++--- arch/arm64/kernel/fpsimd.c | 74 ++++++++-------- arch/arm64/kernel/idreg-override.c | 11 +++ arch/arm64/kernel/ptrace.c | 44 ++++++++++ arch/arm64/kernel/signal.c | 103 ++++++++++++----------- arch/arm64/kernel/signal32.c | 11 ++- arch/arm64/kvm/fpsimd.c | 1 + arch/arm64/kvm/hyp/include/hyp/switch.h | 13 ++- arch/arm64/tools/cpucaps | 2 +- arch/arm64/tools/sysreg | 4 +- include/uapi/linux/elf.h | 1 + 20 files changed, 259 insertions(+), 117 deletions(-) -- 2.33.0

2 17

[PATCH OLK-6.6] net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
by Yi Yang 07 Sep '26

07 Sep '26

From: Shay Drory <shayd(a)nvidia.com> mainline inclusion from mainline-v7.2-rc3 commit 0f0e4ae6975c773f7854fc48932a267f6c79088f category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/17727 CVE: CVE-2026-72345 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- On failure at index i, the reverse cleanup loop in mlx5_lag_create_single_fdb() starts from i, so the failed index itself is rolled back. That can operate on uninitialized state or double-tear-down a rule the add_one path already self-rolled-back. Start the rollback from i - 1 so only successfully-installed entries are undone. Fixes: ddbb5ddc43ad ("net/mlx5: LAG, Refactor lag logic") Signed-off-by: Shay Drory <shayd(a)nvidia.com> Reviewed-by: Mark Bloch <mbloch(a)nvidia.com> Signed-off-by: Tariq Toukan <tariqt(a)nvidia.com> Link: https://patch.msgid.link/20260630112917.698313-2-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Conflicts: drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c [Commit 3b8b364f97f40 which factored shared FDB code into shared_fdb.c is not present in this tree; mlx5_lag_create_single_fdb() still lives in lag.c. Apply the same off-by-one rollback fix there by starting the reverse cleanup at i-1 instead of i.] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c index f6b1ac80c0af..96b1eb0ec72d 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/lag/lag.c @@ -570,7 +570,7 @@ static int mlx5_lag_create_single_fdb(struct mlx5_lag *ldev) } return 0; err: - for (; i > MLX5_LAG_P1; i--) + for (i--; i > MLX5_LAG_P1; i--) mlx5_eswitch_offloads_single_fdb_del_one(master_esw, ldev->pf[i].dev->priv.eswitch); return err; -- 2.25.1

2 1

[PATCH OLK-6.6] ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
by Lu Chentao 07 Sep '26

07 Sep '26

mainline inclusion from mainline-v7.2-rc2 commit 462775c620197adaabc983ce847e5b9878ff4cb0 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/17314 CVE: CVE-2026-72031 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host. Cc: stable(a)vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity(a)proton.me> Reviewed-by: Niklas Cassel <cassel(a)kernel.org> Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Conflicts: drivers/ata/libata-core.c [5.10 didn't introduce __ata_dev_quirks and ATA_QUIRK_NOLPM, adapted with ATA_HORKAGE_NOLPM] Signed-off-by: Lu Chentao <luchentao1(a)huawei.com> --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0aac030532c3..9110e9b50b80 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4232,10 +4232,13 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_NOLPM }, { "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM | ATA_HORKAGE_NOLPM }, + /* PNY CS900 (Phison PS3111-S11, DRAM-less) drops the link on DIPM */ + { "PNY CS900 1TB SSD", NULL, ATA_HORKAGE_NOLPM }, + /* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM }, { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM }, -- 2.52.0

2 1

[PATCH OLK-6.6] ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD
by Lu Chentao 07 Sep '26

07 Sep '26

mainline inclusion from mainline-v7.2-rc2 commit 462775c620197adaabc983ce847e5b9878ff4cb0 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/17314 CVE: CVE-2026-72031 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host. Cc: stable(a)vger.kernel.org Signed-off-by: Bryam Vargas <hexlabsecurity(a)proton.me> Reviewed-by: Niklas Cassel <cassel(a)kernel.org> Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Conflicts: drivers/ata/libata-core.c [5.10 didn't introduce __ata_dev_quirks and ATA_QUIRK_NOLPM, adapted with ATA_HORKAGE_NOLPM] Signed-off-by: Lu Chentao <luchentao1(a)huawei.com> --- drivers/ata/libata-core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 0aac030532c3..9110e9b50b80 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4232,10 +4232,13 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_NOLPM }, { "Crucial_CT960M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM | ATA_HORKAGE_NOLPM }, + /* PNY CS900 (Phison PS3111-S11, DRAM-less) drops the link on DIPM */ + { "PNY CS900 1TB SSD", NULL, ATA_HORKAGE_NOLPM }, + /* These specific Samsung models/firmware-revs do not handle LPM well */ { "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG SSD PM830 mSATA *", "CXM13D1Q", ATA_HORKAGE_NOLPM }, { "SAMSUNG MZ7TD256HAFV-000L9", NULL, ATA_HORKAGE_NOLPM }, { "SAMSUNG MZ7TE512HMHP-000L1", "EXT06L0Q", ATA_HORKAGE_NOLPM }, -- 2.52.0

2 1

[PATCH OLK-5.10] ocfs2: validate fast symlink target during inode read
by Lai Zewei 07 Sep '26

07 Sep '26

mainline inclusion from mainline-v7.2-rc1 commit e234973f286ed2e8961a24561ec91594ec3e3ff8 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/18148 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- ocfs2_validate_inode_block() already rejects several inconsistent self-contained dinodes before they are exposed to the rest of the filesystem. Fast symlinks need the same treatment. A zero-cluster symlink is treated as a fast symlink and later read through page_get_link() and ocfs2_fast_symlink_read_folio(). That path uses strnlen() on the inline payload and then copies len + 1 bytes into the folio. If a corrupt dinode stores an i_size that does not fit the inline area or omits the terminating NUL at i_size, that copy reads past the end of the inode block buffer. Reject zero-cluster symlink dinodes whose i_size exceeds the inline fast-symlink capacity or whose inline payload is not NUL-terminated exactly at i_size when the inode block is validated. This keeps malformed fast symlinks from reaching the read path. Validation reproduced this kernel report: KASAN use-after-free in ocfs2_fast_symlink_read_folio+0x12c/0x1f0 RIP: 0033:0x7f5c6d859aa7 Read of size 3905 Call trace: dump_stack_lvl+0x66/0xa0 (?:?) print_report+0xce/0x630 (?:?) ocfs2_fast_symlink_read_folio+0x12c/0x1f0 (fs/ocfs2/inode.c:?) srso_alias_return_thunk+0x5/0xfbef5 (?:?) __virt_addr_valid+0x19f/0x330 (?:?) kasan_report+0xe0/0x110 (?:?) kasan_check_range+0x105/0x1b0 (?:?) __asan_memcpy+0x23/0x60 (?:?) filemap_read_folio+0x27/0xe0 (?:?) filemap_read_folio+0x35/0xe0 (?:?) do_read_cache_folio+0x138/0x230 (?:?) __page_get_link+0x26/0x110 (?:?) page_get_link+0x2e/0x70 (?:?) vfs_readlink+0x15e/0x250 (?:?) touch_atime+0x4d/0x370 (?:?) do_readlinkat+0x186/0x200 (?:?) do_user_addr_fault+0x65a/0x890 (?:?) __x64_sys_readlink+0x46/0x60 (?:?) do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87) entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) Link: https://lore.kernel.org/20260528151230.361127-1-rollkingzzc@gmail.com Fixes: ea022dfb3c2a ("ocfs: simplify symlink handling") Signed-off-by: Zhang Cen <rollkingzzc(a)gmail.com> Reviewed-by: Joseph Qi <joseph.qi(a)linux.alibaba.com> Cc: Gui-Dong Han <2045gemini(a)gmail.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Changwei Ge <gechangwei(a)live.cn> Cc: Jun Piao <piaojun(a)huawei.com> Cc: Heming Zhao <heming.zhao(a)suse.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Conflicts: fs/ocfs2/inode.c [ctx conflicts] Signed-off-by: Lai Zewei <laizewei3(a)huawei.com> --- fs/ocfs2/inode.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/fs/ocfs2/inode.c b/fs/ocfs2/inode.c index 7c9dfd50c1c1..e5fa0070016f 100644 --- a/fs/ocfs2/inode.c +++ b/fs/ocfs2/inode.c @@ -1418,6 +1418,29 @@ int ocfs2_validate_inode_block(struct super_block *sb, goto bail; } + if (S_ISLNK(le16_to_cpu(di->i_mode)) && + !le32_to_cpu(di->i_clusters)) { + int max_inline = ocfs2_fast_symlink_chars(sb); + u64 i_size = le64_to_cpu(di->i_size); + + if (i_size >= max_inline) { + rc = ocfs2_error(sb, + "Invalid dinode #%llu: fast symlink i_size %llu exceeds max %d\n", + (unsigned long long)bh->b_blocknr, + (unsigned long long)i_size, + max_inline - 1); + goto bail; + } + + if (strnlen((char *)di->id2.i_symlink, i_size + 1) != i_size) { + rc = ocfs2_error(sb, + "Invalid dinode #%llu: fast symlink is not NUL-terminated at i_size %llu\n", + (unsigned long long)bh->b_blocknr, + (unsigned long long)i_size); + goto bail; + } + } + rc = 0; bail: -- 2.52.0

2 1