- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] config: enable CONFIG_BPF_STREAM_PARSER=y on arm64
by Liu Jian 02 Jun '23

02 Jun '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I79J3X CVE: N/A ---------------------------------------------------- It is already enabled by default on the x86 and loongarch platforms, so let's enable it on the arm64 platform. Signed-off-by: Liu Jian <liujian56(a)huawei.com> Reviewed-by: Wei Yongjun <weiyongjun1(a)huawe.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 76de734953fc..2c4d0524487c 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -1796,7 +1796,7 @@ CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set +CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # -- 2.34.1

1 0

[PATCH openEuler-22.03-LTS-SP2 0/2] mitigatin cacheline false
by Yang Yingliang 02 Jun '23

02 Jun '23

In the test of execl, shell1 and shell8 of UnixBench, L3 false sharing occurs between rwsem_try_write_lock_unqueued() and filemap_map_pages(). The offset between address_space.host and address_space.i_mmap_rwsem is 48. It may occur L3 false sharing. Their offsets in struct ext4_inode_info is 696 and 744, so when the address of ext4_inode_info after L3 aligned, it may occur L3 false sharing in the following condition: [0x00 ~ 0x10] false sharing [0x18 ~ 0x40] no false sharing [0x48 ~ 0x80] false sharing Change the offset of 'vfs_inode' from 320 to 360 in ext4_inode_info and make the address of ext4_inode_info L3 aligned, so the offset of host and i_mmap_rwsem in ext4_inode_info is changed to 736 and 784, it can make them in different L3 to avoid false sharing. ./Run -c 96 -i 3 execl Before this patch: System Benchmarks Partial Index BASELINE RESULT INDEX Execl Throughput 43.0 24238.0 5636.8 ======== System Benchmarks Index Score (Partial Only) 5636.8 After this patch: System Benchmarks Partial Index BASELINE RESULT INDEX Execl Throughput 43.0 29363.7 6828.8 ======== System Benchmarks Index Score (Partial Only) 6828.8 Yang Yingliang (2): ext4: mitigatin cacheline false sharing in struct ext4_inode_info enable MITIGATION_FALSE_SHARING by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/ext4/Kconfig | 9 +++++++++ fs/ext4/ext4.h | 5 +++++ fs/ext4/super.c | 4 ++++ 5 files changed, 20 insertions(+) -- 2.33.0

1 2

[PATCH OLK-5.10] ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
by Zhengchao Shao 02 Jun '23

02 Jun '23

From: Julian Wiedmann <jwi(a)linux.ibm.com> mainline inclusion from mainline-v5.16-rc3 commit 0276af2176c78771da7f311621a25d7608045827 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7A2A0 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- ethtool_set_coalesce() now uses both the .get_coalesce() and .set_coalesce() callbacks. But the check for their availability is buggy, so changing the coalesce settings on a device where the driver provides only _one_ of the callbacks results in a NULL pointer dereference instead of an -EOPNOTSUPP. Fix the condition so that the availability of both callbacks is ensured. This also matches the netlink code. Note that reproducing this requires some effort - it only affects the legacy ioctl path, and needs a specific combination of driver options: - have .get_coalesce() and .coalesce_supported but no .set_coalesce(), or - have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't cause the crash as it first attempts to call ethtool_get_coalesce() and bails out on error. Fixes: f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode") Cc: Yufeng Mo <moyufeng(a)huawei.com> Cc: Huazhong Tan <tanhuazhong(a)huawei.com> Cc: Andrew Lunn <andrew(a)lunn.ch> Cc: Heiner Kallweit <hkallweit1(a)gmail.com> Signed-off-by: Julian Wiedmann <jwi(a)linux.ibm.com> Link: https://lore.kernel.org/r/20211126175543.28000-1-jwi@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- net/ethtool/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ethtool/ioctl.c b/net/ethtool/ioctl.c index ab056feb44a8..63a88b3e861d 100644 --- a/net/ethtool/ioctl.c +++ b/net/ethtool/ioctl.c @@ -1696,7 +1696,7 @@ static noinline_for_stack int ethtool_set_coalesce(struct net_device *dev, struct ethtool_coalesce coalesce; int ret; - if (!dev->ethtool_ops->set_coalesce && !dev->ethtool_ops->get_coalesce) + if (!dev->ethtool_ops->set_coalesce || !dev->ethtool_ops->get_coalesce) return -EOPNOTSUPP; ret = dev->ethtool_ops->get_coalesce(dev, &coalesce, &kernel_coalesce, -- 2.34.1

2 1

[PATCH v2 OLK-5.10] config: enable CONFIG_BPF_STREAM_PARSER=y on arm64
by Liu Jian 02 Jun '23

02 Jun '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I79J3X CVE: N/A ---------------------------------------------------- It is already enabled by default on the x86 and loongarch platforms, so let's enable it on the arm64 platform. Signed-off-by: Liu Jian <liujian56(a)huawei.com> Reviewed-by: Wei Yongjun <weiyongjun1(a)huawe.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 76de734953fc..2c4d0524487c 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -1796,7 +1796,7 @@ CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_BPF_JIT=y -# CONFIG_BPF_STREAM_PARSER is not set +CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # -- 2.34.1

1 0

[PATCH openEuler-22.03-LTS-SP2 0/2] mitigatin cacheline false
by Yang Yingliang 02 Jun '23

02 Jun '23

In the test of execl, shell1 and shell8 of UnixBench, L3 false sharing occurs between rwsem_try_write_lock_unqueued() and filemap_map_pages(). The offset between address_space.host and address_space.i_mmap_rwsem is 48. It may occur L3 false sharing. Their offsets in struct ext4_inode_info is 696 and 744, so when the address of ext4_inode_info after L3 aligned, it may occur L3 false sharing in the following condition: [0x00 ~ 0x10] false sharing [0x18 ~ 0x40] no false sharing [0x48 ~ 0x80] false sharing Change the offset of 'vfs_inode' from 320 to 360 in ext4_inode_info and make the address of ext4_inode_info L3 aligned, so the offset of host and i_mmap_rwsem in ext4_inode_info is changed to 736 and 784, it can make them in different L3 to avoid false sharing. ./Run -c 96 -i 3 execl Before this patch: System Benchmarks Partial Index BASELINE RESULT INDEX Execl Throughput 43.0 24238.0 5636.8 ======== System Benchmarks Index Score (Partial Only) 5636.8 After this patch: System Benchmarks Partial Index BASELINE RESULT INDEX Execl Throughput 43.0 29363.7 6828.8 ======== System Benchmarks Index Score (Partial Only) 6828.8 Yang Yingliang (2): ext4: mitigatin cacheline false sharing in struct ext4_inode_info enable MITIGATION_FALSE_SHARING by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/ext4/Kconfig | 9 +++++++++ fs/ext4/ext4.h | 5 +++++ fs/ext4/super.c | 4 ++++ 5 files changed, 20 insertions(+) -- 2.33.0

1 2

[PATCH OLK-5.10 0/2] Fixed two accelerator bugfixes.
by liulongfang 02 Jun '23

02 Jun '23

From: JiangShui Yang <yangjiangshui(a)h-partners.com> Longfang Liu (1): crypto:hisilicon/qm: bugfix queue parameter issue Zhangfei Gao (1): uacce: use filep->f_mapping to replace inode->i_mapping drivers/crypto/hisilicon/hpre/hpre_main.c | 5 +++++ drivers/crypto/hisilicon/qm.c | 14 ++++++++++---- drivers/crypto/hisilicon/qm_common.h | 1 - drivers/crypto/hisilicon/sec2/sec_main.c | 5 +++++ drivers/crypto/hisilicon/zip/zip_main.c | 5 +++++ drivers/misc/uacce/uacce.c | 16 +++++++++------- include/linux/hisi_acc_qm.h | 8 ++++++++ include/linux/uacce.h | 4 ++-- 8 files changed, 44 insertions(+), 14 deletions(-) -- 2.30.0

1 2

[PATCH OLK-5.10] net: sched: fix NULL pointer dereference in mq_attach
by Zhengchao Shao 02 Jun '23

02 Jun '23

mainline inclusion from mainline-v6.4-rc5 commit 36eec020fab668719b541f34d97f44e232ffa165 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I79V6E CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When use the following command to test: 1)ip link add bond0 type bond 2)ip link set bond0 up 3)tc qdisc add dev bond0 root handle ffff: mq 4)tc qdisc replace dev bond0 parent ffff:fff1 handle ffff: mq The kernel reports NULL pointer dereference issue. The stack information is as follows: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Internal error: Oops: 0000000096000006 [#1] SMP Modules linked in: pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : mq_attach+0x44/0xa0 lr : qdisc_graft+0x20c/0x5cc sp : ffff80000e2236a0 x29: ffff80000e2236a0 x28: ffff0000c0e59d80 x27: ffff0000c0be19c0 x26: ffff0000cae3e800 x25: 0000000000000010 x24: 00000000fffffff1 x23: 0000000000000000 x22: ffff0000cae3e800 x21: ffff0000c9df4000 x20: ffff0000c9df4000 x19: 0000000000000000 x18: ffff80000a934000 x17: ffff8000f5b56000 x16: ffff80000bb08000 x15: 0000000000000000 x14: 0000000000000000 x13: 6b6b6b6b6b6b6b6b x12: 6b6b6b6b00000001 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff0000c0be0730 x7 : bbbbbbbbbbbbbbbb x6 : 0000000000000008 x5 : ffff0000cae3e864 x4 : 0000000000000000 x3 : 0000000000000001 x2 : 0000000000000001 x1 : ffff8000090bc23c x0 : 0000000000000000 Call trace: mq_attach+0x44/0xa0 qdisc_graft+0x20c/0x5cc tc_modify_qdisc+0x1c4/0x664 rtnetlink_rcv_msg+0x354/0x440 netlink_rcv_skb+0x64/0x144 rtnetlink_rcv+0x28/0x34 netlink_unicast+0x1e8/0x2a4 netlink_sendmsg+0x308/0x4a0 sock_sendmsg+0x64/0xac ____sys_sendmsg+0x29c/0x358 ___sys_sendmsg+0x90/0xd0 __sys_sendmsg+0x7c/0xd0 __arm64_sys_sendmsg+0x2c/0x38 invoke_syscall+0x54/0x114 el0_svc_common.constprop.1+0x90/0x174 do_el0_svc+0x3c/0xb0 el0_svc+0x24/0xec el0t_64_sync_handler+0x90/0xb4 el0t_64_sync+0x174/0x178 This is because when mq is added for the first time, qdiscs in mq is set to NULL in mq_attach(). Therefore, when replacing mq after adding mq, we need to initialize qdiscs in the mq before continuing to graft. Otherwise, it will couse NULL pointer dereference issue in mq_attach(). And the same issue will occur in the attach functions of mqprio, taprio and htb. ffff:fff1 means that the repalce qdisc is ingress. Ingress does not allow any qdisc to be attached. Therefore, ffff:fff1 is incorrectly used, and the command should be dropped. Fixes: 6ec1c69a8f64 ("net_sched: add classful multiqueue dummy scheduler") Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Tested-by: Peilin Ye <peilin.ye(a)bytedance.com> Acked-by: Jamal Hadi Salim <jhs(a)mojatatu.com> Link: https://lore.kernel.org/r/20230527093747.3583502-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- net/sched/sch_api.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index b12a3502fca5..b8eecd6704cb 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1590,6 +1590,10 @@ static int tc_modify_qdisc(struct sk_buff *skb, struct nlmsghdr *n, NL_SET_ERR_MSG(extack, "Qdisc parent/child loop detected"); return -ELOOP; } + if (clid == TC_H_INGRESS) { + NL_SET_ERR_MSG(extack, "Ingress cannot graft directly"); + return -EINVAL; + } qdisc_refcount_inc(q); goto graft; } else { -- 2.34.1

2 1

[openeuler/rdma-core v2 0/4] src-openeuler/rdma-core:bugfixes
by Chengchang Tang 02 Jun '23

02 Jun '23

From: Juan Zhou <zhoujuan51(a)h-partners.com> Chengchang Tang (1): libhns: Add a judgment to the congestion control algorithm Haoyue Xu (1): libhns: Fix arrangement in SL to adapt MPI APP Junxian Huang (1): libhns: Fix incorrect post-send with direct wqe of wr-list in user space Luoyouming (1): libhns: Fix the owner bit error of sq in new io libibverbs/man/ibv_poll_cq.3 | 5 +++++ libibverbs/verbs.h | 15 ++++++++++++++- providers/hns/hns_roce_u_hw_v2.c | 33 ++++++++++++++++++++++++++------ providers/hns/hns_roce_u_verbs.c | 3 +++ 4 files changed, 49 insertions(+), 7 deletions(-) -- 2.30.0

1 4

Re: [PATCH OLK-5.10] config: enable CONFIG_BPF_STREAM_PARSER=y on arm64
by Wei Yongjun 02 Jun '23

02 Jun '23

On 2023/6/1 23:22, Liu Jian wrote: > hulk inclusion > category: feature > bugzilla: https://gitee.com/openeuler/kernel/issues/I79J3X > CVE: N/A > > ---------------------------------------------------- > > It is already enabled by default on the x86 and loongarch platforms, so > let's enable it on the arm64 platform. > > Signed-off-by: Liu Jian <liujian56(a)huawei.com> > --- > arch/arm64/configs/openeuler_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > Reviewed-by: Wei Yongjun <weiyongjun1(a)huawe.com>

1 0

[PATCH openEuler-1.0-LTS] power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
by Yongqiang Liu 02 Jun '23

02 Jun '23

From: Zhao Wenhui <zhaowenhui8(a)huawei.com> mainline inclusion from mainline-v6.3-rc4 commit 47c29d69212911f50bdcdd0564b5999a559010d4 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I7781Q CVE: CVE-2023-33288 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- In bq24190_probe, &bdi->input_current_limit_work is bound with bq24190_input_current_limit_work. When external power changed, it will call bq24190_charger_external_power_changed to start the work. If we remove the module which will call bq24190_remove to make cleanup, there may be a unfinished work. The possible sequence is as follows: CPU0 CPUc1 |bq24190_input_current_limit_work bq24190_remove | power_supply_unregister | device_unregister | power_supply_dev_release| kfree(psy) | | | power_supply_get_property_from_supplier | //use Fix it by finishing the work before cleanup in the bq24190_remove Fixes: 97774672573a ("power_supply: Initialize changed_work before calling device_add") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Sebastian Reichel <sebastian.reichel(a)collabora.com> Conflicts: drivers/power/supply/bq24190_charger.c Signed-off-by: Zhao Wenhui <zhaowenhui8(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Reviewed-by: Chen Hui <judy.chenhui(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/power/supply/bq24190_charger.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c index b58df04d03b3..760feee2cad9 100644 --- a/drivers/power/supply/bq24190_charger.c +++ b/drivers/power/supply/bq24190_charger.c @@ -1821,6 +1821,7 @@ static int bq24190_remove(struct i2c_client *client) struct bq24190_dev_info *bdi = i2c_get_clientdata(client); int error; + cancel_delayed_work_sync(&bdi->input_current_limit_work); error = pm_runtime_get_sync(bdi->dev); if (error < 0) { dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error); -- 2.25.1

1 0

2024

2023

2022

2021

2020

2019

Kernel