- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6] mcb: fix a double free bug in chameleon_parse_gdd()
by Xia Fukun 10 Jul '25

10 Jul '25

From: Haoxiang Li <haoxiang_li2024(a)163.com> stable inclusion from stable-v6.6.89 commit 96838eb1836fd372e42be5db84f0b333b65146a6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC6BK8 CVE: CVE-2025-37817 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 7c7f1bfdb2249f854a736d9b79778c7e5a29a150 upstream. In chameleon_parse_gdd(), if mcb_device_register() fails, 'mdev' would be released in mcb_device_register() via put_device(). Thus, goto 'err' label and free 'mdev' again causes a double free. Just return if mcb_device_register() fails. Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus") Cc: stable <stable(a)kernel.org> Signed-off-by: Haoxiang Li <haoxiang_li2024(a)163.com> Signed-off-by: Johannes Thumshirn <jth(a)kernel.org> Link: https://lore.kernel.org/r/6201d09e2975ae5789879f79a6de4c38de9edd4a.17415962… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- drivers/mcb/mcb-parse.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c index 1ae37e693de0..d080e21df666 100644 --- a/drivers/mcb/mcb-parse.c +++ b/drivers/mcb/mcb-parse.c @@ -101,7 +101,7 @@ static int chameleon_parse_gdd(struct mcb_bus *bus, ret = mcb_device_register(bus, mdev); if (ret < 0) - goto err; + return ret; return 0; -- 2.34.1

2 1

[PATCH OLK-5.10] usb: cdns3: fix random warning message when driver load
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Frank Li <Frank.Li(a)nxp.com> stable inclusion from stable-v5.15.63 commit 8e142744f0e96abc69ccd99e6d6c7eb662267f21 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICG794 CVE: CVE-2022-50151 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 8659ab3d936fcf0084676f98b75b317017aa8f82 ] Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0 pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... } kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning. GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely. Signed-off-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/r/20220609154456.2871672-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/usb/cdns3/gadget.c drivers/usb/cdns3/cdns3-gadget.c [file name is different] Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/usb/cdns3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c index eeea892248b5..2bd24fb806fb 100644 --- a/drivers/usb/cdns3/gadget.c +++ b/drivers/usb/cdns3/gadget.c @@ -237,7 +237,7 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep) priv_ep->trb_pool = dma_alloc_coherent(priv_dev->sysdev, ring_size, &priv_ep->trb_pool_dma, - GFP_DMA32 | GFP_ATOMIC); + GFP_ATOMIC); if (!priv_ep->trb_pool) return -ENOMEM; -- 2.22.0

2 1

[PATCH OLK-5.10] memstick: rtsx_usb_ms: Fix slab-use-after-free in rtsx_usb_ms_drv_remove
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Luo Qiu <luoqiu(a)kylinsec.com.cn> stable inclusion from stable-v5.10.236 commit 9dfaf4d723c62bda8d9d1340e2e78acf0c190439 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC1PGY CVE: CVE-2025-22020 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4676741a3464b300b486e70585c3c9b692be1632 upstream. This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] Read of size 8 at addr ffff888136335380 by task kworker/6:0/140241 CPU: 6 UID: 0 PID: 140241 Comm: kworker/6:0 Kdump: loaded Tainted: G E 6.14.0-rc6+ #1 Tainted: [E]=UNSIGNED_MODULE Hardware name: LENOVO 30FNA1V7CW/1057, BIOS S0EKT54A 07/01/2024 Workqueue: events rtsx_usb_ms_poll_card [rtsx_usb_ms] Call Trace: <TASK> dump_stack_lvl+0x51/0x70 print_address_description.constprop.0+0x27/0x320 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] print_report+0x3e/0x70 kasan_report+0xab/0xe0 ? rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] rtsx_usb_ms_poll_card+0x159/0x200 [rtsx_usb_ms] ? __pfx_rtsx_usb_ms_poll_card+0x10/0x10 [rtsx_usb_ms] ? __pfx___schedule+0x10/0x10 ? kick_pool+0x3b/0x270 process_one_work+0x357/0x660 worker_thread+0x390/0x4c0 ? __pfx_worker_thread+0x10/0x10 kthread+0x190/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2d/0x50 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 161446: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0x7b/0x90 __kmalloc_noprof+0x1a7/0x470 memstick_alloc_host+0x1f/0xe0 [memstick] rtsx_usb_ms_drv_probe+0x47/0x320 [rtsx_usb_ms] platform_probe+0x60/0xe0 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 bus_probe_device+0xbd/0xd0 device_add+0x4a5/0x760 platform_device_add+0x189/0x370 mfd_add_device+0x587/0x5e0 mfd_add_devices+0xb1/0x130 rtsx_usb_probe+0x28e/0x2e0 [rtsx_usb] usb_probe_interface+0x15c/0x460 call_driver_probe+0x35/0x120 really_probe+0x123/0x410 __driver_probe_device+0xc7/0x1e0 driver_probe_device+0x49/0xf0 __device_attach_driver+0xc6/0x160 bus_for_each_drv+0xe4/0x160 __device_attach+0x13a/0x2b0 rebind_marked_interfaces.isra.0+0xcc/0x110 usb_reset_device+0x352/0x410 usbdev_do_ioctl+0xe5c/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 161506: kasan_save_stack+0x20/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x36/0x60 __kasan_slab_free+0x34/0x50 kfree+0x1fd/0x3b0 device_release+0x56/0xf0 kobject_cleanup+0x73/0x1c0 rtsx_usb_ms_drv_remove+0x13d/0x220 [rtsx_usb_ms] platform_remove+0x2f/0x50 device_release_driver_internal+0x24b/0x2e0 bus_remove_device+0x124/0x1d0 device_del+0x239/0x530 platform_device_del.part.0+0x19/0xe0 platform_device_unregister+0x1c/0x40 mfd_remove_devices_fn+0x167/0x170 device_for_each_child_reverse+0xc9/0x130 mfd_remove_devices+0x6e/0xa0 rtsx_usb_disconnect+0x2e/0xd0 [rtsx_usb] usb_unbind_interface+0xf3/0x3f0 device_release_driver_internal+0x24b/0x2e0 proc_disconnect_claim+0x13d/0x220 usbdev_do_ioctl+0xb5e/0x1860 usbdev_ioctl+0xa/0x20 __x64_sys_ioctl+0xc5/0xf0 do_syscall_64+0x59/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 Second to last potentially related work creation: kasan_save_stack+0x20/0x40 kasan_record_aux_stack+0x85/0x90 insert_work+0x29/0x100 __queue_work+0x34a/0x540 call_timer_fn+0x2a/0x160 expire_timers+0x5f/0x1f0 __run_timer_base.part.0+0x1b6/0x1e0 run_timer_softirq+0x8b/0xe0 handle_softirqs+0xf9/0x360 __irq_exit_rcu+0x114/0x130 sysvec_apic_timer_interrupt+0x72/0x90 asm_sysvec_apic_timer_interrupt+0x16/0x20 The buggy address belongs to the object at ffff888136335000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 896 bytes inside of freed 2048-byte region [ffff888136335000, ffff888136335800) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x136330 head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0x17ffffc0000040(head|node=0|zone=2|lastcpupid=0x1fffff) page_type: f5(slab) raw: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 raw: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000040 ffff888100042f00 ffffea000417a000 dead000000000002 head: 0000000000000000 0000000000080008 00000000f5000000 0000000000000000 head: 0017ffffc0000003 ffffea0004d8cc01 ffffffffffffffff 0000000000000000 head: 0000000000000008 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888136335280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335300: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888136335380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888136335400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888136335480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 6827ca573c03 ("memstick: rtsx_usb_ms: Support runtime power management") Signed-off-by: Luo Qiu <luoqiu(a)kylinsec.com.cn> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/4B7BC3E6E291E6F2+20250317101438.25650-1-luoqiu@ky… Signed-off-by: Ulf Hansson <ulf.hansson(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Mingrui <liumingrui(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/memstick/host/rtsx_usb_ms.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c index 29271ad4728a..dec279845a75 100644 --- a/drivers/memstick/host/rtsx_usb_ms.c +++ b/drivers/memstick/host/rtsx_usb_ms.c @@ -813,6 +813,7 @@ static int rtsx_usb_ms_drv_remove(struct platform_device *pdev) host->eject = true; cancel_work_sync(&host->handle_req); + cancel_delayed_work_sync(&host->poll_card); mutex_lock(&host->host_mutex); if (host->req) { -- 2.22.0

2 1

[PATCH OLK-5.10] scsi: lpfc: Fix null pointer dereference after failing to issue FLOGI and PLOGI
by Guo Mengqi 10 Jul '25

10 Jul '25

From: James Smart <jsmart2021(a)gmail.com> mainline inclusion from mainline-v5.19-rc1 commit 577a942df3de2666f6947bdd3a5c9e8d30073424 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBP6SH CVE: CVE-2022-49535 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- [ Upstream commit 577a942df3de2666f6947bdd3a5c9e8d30073424 ] If lpfc_issue_els_flogi() fails and returns non-zero status, the node reference count is decremented to trigger the release of the nodelist structure. However, if there is a prior registration or dev-loss-evt work pending, the node may be released prematurely. When dev-loss-evt completes, the released node is referenced causing a use-after-free null pointer dereference. Similarly, when processing non-zero ELS PLOGI completion status in lpfc_cmpl_els_plogi(), the ndlp flags are checked for a transport registration before triggering node removal. If dev-loss-evt work is pending, the node may be released prematurely and a subsequent call to lpfc_dev_loss_tmo_handler() results in a use after free ndlp dereference. Add test for pending dev-loss before decrementing the node reference count for FLOGI, PLOGI, PRLI, and ADISC handling. Link: https://lore.kernel.org/r/20220412222008.126521-9-jsmart2021@gmail.com Co-developed-by: Justin Tee <justin.tee(a)broadcom.com> Signed-off-by: Justin Tee <justin.tee(a)broadcom.com> Signed-off-by: James Smart <jsmart2021(a)gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/scsi/lpfc/lpfc_els.c [Some contexts are not in this version] Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/scsi/lpfc/lpfc_els.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c index deb9202307a9..f659a4014da3 100644 --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -1484,10 +1484,12 @@ lpfc_initial_flogi(struct lpfc_vport *vport) } if (lpfc_issue_els_flogi(vport, ndlp, 0)) { - /* This decrement of reference count to node shall kick off - * the release of the node. + /* A node reference should be retained while registered with a + * transport or dev-loss-evt work is pending. + * Otherwise, decrement node reference to trigger release. */ - lpfc_nlp_put(ndlp); + if (!(ndlp->nlp_flag & NLP_IN_DEV_LOSS)) + lpfc_nlp_put(ndlp); return 0; } return 1; @@ -1531,10 +1533,12 @@ lpfc_initial_fdisc(struct lpfc_vport *vport) } if (lpfc_issue_els_fdisc(vport, ndlp, 0)) { - /* decrement node reference count to trigger the release of - * the node. + /* A node reference should be retained while registered with a + * transport or dev-loss-evt work is pending. + * Otherwise, decrement node reference to trigger release. */ - lpfc_nlp_put(ndlp); + if (!(ndlp->nlp_flag & NLP_IN_DEV_LOSS)) + lpfc_nlp_put(ndlp); return 0; } return 1; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1

[PATCH OLK-6.6] media: cxusb: no longer judge rbuf when the write fails
by Guo Mengqi 10 Jul '25

10 Jul '25

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.16-rc1 commit 73fb3b92da84637e3817580fa205d48065924e15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/ICK4N2 CVE: CVE-2025-38229 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- syzbot reported a uninit-value in cxusb_i2c_xfer. [1] Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw() succeeds and rlen is greater than 0, the read operation of usb_bulk_msg() will be executed to read rlen bytes of data from the dvb device into the rbuf. In this case, although rlen is 1, the write operation failed which resulted in the dvb read operation not being executed, and ultimately variable i was not initialized. [1] BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline] cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196 __i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1 i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315 i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343 i2c_master_send include/linux/i2c.h:109 [inline] i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183 do_loop_readv_writev fs/read_write.c:848 [inline] vfs_writev+0x963/0x14e0 fs/read_write.c:1057 do_writev+0x247/0x5c0 fs/read_write.c:1101 __do_sys_writev fs/read_write.c:1169 [inline] __se_sys_writev fs/read_write.c:1166 [inline] __x64_sys_writev+0x98/0xe0 fs/read_write.c:1166 x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3 Tested-by: syzbot+526bd95c0ec629993bf3(a)syzkaller.appspotmail.com Fixes: 22c6d93a7310 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box") Cc: stable(a)vger.kernel.org Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Signed-off-by: Hans Verkuil <hverkuil(a)xs4all.nl> Signed-off-by: Xinyu Zheng <zhengxinyu6(a)huawei.com> Signed-off-by: Guo Mengqi <guomengqi3(a)huawei.com> --- drivers/media/usb/dvb-usb/cxusb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/dvb-usb/cxusb.c b/drivers/media/usb/dvb-usb/cxusb.c index 1d98d3465e28..ce52c936cb93 100644 --- a/drivers/media/usb/dvb-usb/cxusb.c +++ b/drivers/media/usb/dvb-usb/cxusb.c @@ -119,9 +119,8 @@ static void cxusb_gpio_tuner(struct dvb_usb_device *d, int onoff) o[0] = GPIO_TUNER; o[1] = onoff; - cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1); - if (i != 0x01) + if (!cxusb_ctrl_msg(d, CMD_GPIO_WRITE, o, 2, &i, 1) && i != 0x01) dev_info(&d->udev->dev, "gpio_write failed.\n"); st->gpio_write_state[GPIO_TUNER] = onoff; -- 2.22.0

2 1