- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 v12 0/7] Add support for IPIv
by Jinqian Yang 23 Apr '25

23 Apr '25

Patch#1 Allocate VM table and save vpeid in it Patch#2 avoid sending multi-SGIs in IPIV Patch#3 Set base address of vm table and targe ITS when vpe schedule and deschedule Patch#4 Register ipiv exception interrupt Patch#5 Add interface KVM_CAP_ARM_IPIV_MODE Patch#6 Probe and configure IPIV capacity on HIP12 Patch#7 Use KABI_EXTEND to perform kabi repair for IPIV Jinqian Yang (2): kvm: arm64: avoid sending multi-SGIs in IPIV kabi: Use KABI_EXTEND to perform kabi repair for IPIV Xiang Chen (5): kvm: hisi_virt: Allocate VM table and save vpeid in it irqchip: gicv3-its: Set base address of vm table and targe ITS when vpe schedule and deschedule kvm: hisi_virt: Register ipiv exception interrupt kvm: arm64: Add interface KVM_CAP_ARM_IPIV_MODE kvm: hisi_virt: Probe and configure IPIV capacity on HIP12 .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 16 +++ arch/arm64/kvm/hisilicon/hisi_virt.c | 37 +++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 11 ++ arch/arm64/kvm/sys_regs.c | 11 ++ arch/arm64/kvm/vgic/vgic-init.c | 36 +++++++ arch/arm64/kvm/vgic/vgic-mmio-v3.c | 1 + drivers/irqchip/irq-gic-v3-its.c | 101 +++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 33 ++++++ include/linux/irqchip/arm-gic-v3.h | 27 +++++ include/linux/irqchip/arm-gic-v4.h | 2 + include/uapi/linux/kvm.h | 1 + 13 files changed, 278 insertions(+), 2 deletions(-) -- 2.33.0

2 8

[PATCH OLK-6.6] RDMA/hns: Fix the compatibility between the kernel mode and user mode
by Junxian Huang 23 Apr '25

23 Apr '25

From: Yuyu Li <liyuyu6(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IC1T6B ---------------------------------------------------------------------- This patch modifies the hns-abi.h file and fixes the inconsistency between the kernel-mode ABI and user-mode ABI. Fixes: 0e6c7aaae120 ("RDMA/hns: Optimize user DCA perfermance by sharing DCA status") Signed-off-by: Yuyu Li <liyuyu6(a)huawei.com> Signed-off-by: Xinghai Cen <cenxinghai(a)h-partners.com> --- include/uapi/rdma/hns-abi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/rdma/hns-abi.h b/include/uapi/rdma/hns-abi.h index c73ff42c49bf..8a8f2e4f1bea 100644 --- a/include/uapi/rdma/hns-abi.h +++ b/include/uapi/rdma/hns-abi.h @@ -157,9 +157,9 @@ enum hns_roce_uctx_comp_mask { struct hns_roce_ib_alloc_ucontext { __u32 config; - __u32 reserved; __u32 comp; /* use hns_roce_uctx_comp_mask */ __u32 dca_max_qps; + __u32 reserved; }; struct hns_roce_ib_alloc_pd_resp { -- 2.33.0

2 1

[PATCH OLK-6.6 v11 0/7] Add support for IPIv
by Jinqian Yang 23 Apr '25

23 Apr '25

Patch#1 Allocate VM table and save vpeid in it Patch#2 avoid sending multi-SGIs in IPIV Patch#3 Set base address of vm table and targe ITS when vpe schedule and deschedule Patch#4 Register ipiv exception interrupt Patch#5 Add interface KVM_CAP_ARM_IPIV_MODE Patch#6 Probe and configure IPIV capacity on HIP12 Patch#7 Use KABI_EXTEND to perform kabi repair for IPIV Jinqian Yang (2): kvm: arm64: avoid sending multi-SGIs in IPIV kabi: Use KABI_EXTEND to perform kabi repair for IPIV Xiang Chen (5): kvm: hisi_virt: Allocate VM table and save vpeid in it irqchip: gicv3-its: Set base address of vm table and targe ITS when vpe schedule and deschedule kvm: hisi_virt: Register ipiv exception interrupt kvm: arm64: Add interface KVM_CAP_ARM_IPIV_MODE kvm: hisi_virt: Probe and configure IPIV capacity on HIP12 .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 16 +++ arch/arm64/kvm/hisilicon/hisi_virt.c | 37 +++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 11 ++ arch/arm64/kvm/sys_regs.c | 11 ++ arch/arm64/kvm/vgic/vgic-init.c | 34 ++++++ arch/arm64/kvm/vgic/vgic-mmio-v3.c | 1 + drivers/irqchip/irq-gic-v3-its.c | 101 +++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 33 ++++++ include/linux/irqchip/arm-gic-v3.h | 27 +++++ include/linux/irqchip/arm-gic-v4.h | 2 + include/uapi/linux/kvm.h | 1 + 13 files changed, 276 insertions(+), 2 deletions(-) -- 2.33.0

2 8

[PATCH openEuler-1.0-LTS] vlan: enforce underlying device type
by Wang Liang 23 Apr '25

23 Apr '25

From: Oscar Maes <oscmaes92(a)gmail.com> mainline inclusion from mainline-v6.14-rc6 commit b33a534610067ade2bdaf2052900aaad99701353 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBVPBN Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Currently, VLAN devices can be created on top of non-ethernet devices. Besides the fact that it doesn't make much sense, this also causes a bug which leaks the address of a kernel function to usermode. When creating a VLAN device, we initialize GARP (garp_init_applicant) and MRP (mrp_init_applicant) for the underlying device. As part of the initialization process, we add the multicast address of each applicant to the underlying device, by calling dev_mc_add. __dev_mc_add uses dev->addr_len to determine the length of the new multicast address. This causes an out-of-bounds read if dev->addr_len is greater than 6, since the multicast addresses provided by GARP and MRP are only 6 bytes long. This behaviour can be reproduced using the following commands: ip tunnel add gretest mode ip6gre local ::1 remote ::2 dev lo ip l set up dev gretest ip link add link gretest name vlantest type vlan id 100 Then, the following command will display the address of garp_pdu_rcv: ip maddr show | grep 01:80:c2:00:00:21 Fix the bug by enforcing the type of the underlying device during VLAN device initialization. Fixes: 22bedad3ce11 ("net: convert multicast list to list_head") Reported-by: syzbot+91161fe81857b396c8a0(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/000000000000ca9a81061a01ec20@google.com/ Signed-off-by: Oscar Maes <oscmaes92(a)gmail.com> Reviewed-by: Jiri Pirko <jiri(a)nvidia.com> Link: https://patch.msgid.link/20250303155619.8918-1-oscmaes92@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Wang Liang <wangliang74(a)huawei.com> --- net/8021q/vlan.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 512ada90657b..531faf370bc4 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -123,7 +123,8 @@ int vlan_check_real_dev(struct net_device *real_dev, { const char *name = real_dev->name; - if (real_dev->features & NETIF_F_VLAN_CHALLENGED) { + if (real_dev->features & NETIF_F_VLAN_CHALLENGED || + real_dev->type != ARPHRD_ETHER) { pr_info("VLANs not supported on %s\n", name); NL_SET_ERR_MSG_MOD(extack, "VLANs not supported on device"); return -EOPNOTSUPP; -- 2.34.1

2 2

[PATCH OLK-6.6 v10 0/7] Add support for IPIv
by Jinqian Yang 23 Apr '25

23 Apr '25

Patch#1 Allocate VM table and save vpeid in it Patch#2 avoid sending multi-SGIs in IPIV Patch#3 Set base address of vm table and targe ITS when vpe schedule and deschedule Patch#4 Register ipiv exception interrupt Patch#5 Add interface KVM_CAP_ARM_IPIV_MODE Patch#6 Probe and configure IPIV capacity on HIP12 Patch#7 Use KABI_EXTEND to perform kabi repair for IPIV Jinqian Yang (2): kvm: arm64: avoid sending multi-SGIs in IPIV kabi: Use KABI_EXTEND to perform kabi repair for IPIV Xiang Chen (5): kvm: hisi_virt: Allocate VM table and save vpeid in it irqchip: gicv3-its: Set base address of vm table and targe ITS when vpe schedule and deschedule kvm: hisi_virt: Register ipiv exception interrupt kvm: arm64: Add interface KVM_CAP_ARM_IPIV_MODE kvm: hisi_virt: Probe and configure IPIV capacity on HIP12 .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/arm.c | 16 +++ arch/arm64/kvm/hisilicon/hisi_virt.c | 38 +++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 10 ++ arch/arm64/kvm/sys_regs.c | 11 ++ arch/arm64/kvm/vgic/vgic-init.c | 34 ++++++ arch/arm64/kvm/vgic/vgic-mmio-v3.c | 1 + drivers/irqchip/irq-gic-v3-its.c | 101 +++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 24 +++++ include/linux/irqchip/arm-gic-v3.h | 27 +++++ include/linux/irqchip/arm-gic-v4.h | 2 + include/uapi/linux/kvm.h | 1 + 13 files changed, 267 insertions(+), 2 deletions(-) -- 2.33.0

2 8

[PATCH v4 OLK-6.6 00/10] arm64/mpam: Fix allocated cache size information
by Zeng Heng 23 Apr '25

23 Apr '25

Zeng Heng (10): arm64/mpam: fix memleak in resctrl_arch_mon_ctx_alloc_no_wait() arm64/mpam: fix impossible condition in get_cpumask_from_cache_id() arm64/mpam: fix impossible condition in resctrl_arch_rmid_read() arm64/mpam: Optimize CSU/MBWU monitor multiplexing fs/resctrl: Determine whether the MBM monitors require overflow checking arm64/mpam: Set the cpbm width of msc class with the minimum arm64/mpam: Correct the judgment condition of the CMAX feature fs/resctrl: Fix kmemleak caused by closid_init() arm64/mpam: Fix allocated cache size information arm64/mpam: Add debugging information about CDP monitor value arch/x86/include/asm/resctrl.h | 2 + drivers/platform/mpam/mpam_devices.c | 20 +++++++--- drivers/platform/mpam/mpam_internal.h | 5 ++- drivers/platform/mpam/mpam_resctrl.c | 57 +++++++++++---------------- fs/resctrl/rdtgroup.c | 28 +++++++------ include/linux/arm_mpam.h | 1 + 6 files changed, 61 insertions(+), 52 deletions(-) -- 2.25.1

2 11

[PATCH OLK-6.6] LoongArch: BPF: Fix off-by-one error in build_prologue()
by Huang Xiaojia 23 Apr '25

23 Apr '25

From: Hengqi Chen <hengqi.chen(a)gmail.com> stable inclusion from stable-v6.6.87 commit b3ffad2f02db4aace6799fe0049508b8925eae45 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC2CC7 CVE: CVE-2025-37893 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 7e2586991e36663c9bc48c828b83eab180ad30a9 upstream. Vincent reported that running BPF progs with tailcalls on LoongArch causes kernel hard lockup. Debugging the issues shows that the JITed image missing a jirl instruction at the end of the epilogue. There are two passes in JIT compiling, the first pass set the flags and the second pass generates JIT code based on those flags. With BPF progs mixing bpf2bpf and tailcalls, build_prologue() generates N insns in the first pass and then generates N+1 insns in the second pass. This makes epilogue_offset off by one and we will jump to some unexpected insn and cause lockup. Fix this by inserting a nop insn. Cc: stable(a)vger.kernel.org Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Fixes: bb035ef0cc91 ("LoongArch: BPF: Support mixing bpf2bpf and tailcalls") Reported-by: Vincent Li <vincent.mc.li(a)gmail.com> Tested-by: Vincent Li <vincent.mc.li(a)gmail.com> Closes: https://lore.kernel.org/loongarch/CAK3+h2w6WESdBN3UCr3WKHByD7D6Q_Ve1EDAjotV… Closes: https://lore.kernel.org/bpf/CAK3+h2woEjG_N=-XzqEGaAeCmgu2eTCUc7p6bP4u8Q+DFH… Signed-off-by: Hengqi Chen <hengqi.chen(a)gmail.com> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Huang Xiaojia <huangxiaojia2(a)huawei.com> --- arch/loongarch/net/bpf_jit.c | 2 ++ arch/loongarch/net/bpf_jit.h | 5 +++++ 2 files changed, 7 insertions(+) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index 525fc03d7056..8312887eccaa 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -142,6 +142,8 @@ static void build_prologue(struct jit_ctx *ctx) */ if (seen_tail_call(ctx) && seen_call(ctx)) move_reg(ctx, TCC_SAVED, REG_TCC); + else + emit_insn(ctx, nop); ctx->stack_size = stack_adjust; } diff --git a/arch/loongarch/net/bpf_jit.h b/arch/loongarch/net/bpf_jit.h index 68586338ecf8..f9c569f53949 100644 --- a/arch/loongarch/net/bpf_jit.h +++ b/arch/loongarch/net/bpf_jit.h @@ -27,6 +27,11 @@ struct jit_data { struct jit_ctx ctx; }; +static inline void emit_nop(union loongarch_instruction *insn) +{ + insn->word = INSN_NOP; +} + #define emit_insn(ctx, func, ...) \ do { \ if (ctx->image != NULL) { \ -- 2.34.1

2 1

[PATCH OLK-6.6] ntb_hw_switchtec: Fix shift-out-of-bounds in switchtec_ntb_mw_set_trans
by Xiaomeng Zhang 23 Apr '25

23 Apr '25

From: Yajun Deng <yajun.deng(a)linux.dev> stable inclusion from stable-v6.6.87 commit de203da734fae00e75be50220ba5391e7beecdf9 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC1QP4 CVE: CVE-2023-53034 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit de203da734fae00e75be50220ba5391e7beecdf9 ] There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and size. This would make xlate_pos negative. [ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000 [ 23.734158] ================================================================================ [ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7 [ 23.734418] shift exponent -1 is negative Ensuring xlate_pos is a positive or zero before BIT. Fixes: 1e2fd202f859 ("ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()") Signed-off-by: Yajun Deng <yajun.deng(a)linux.dev> Reviewed-by: Logan Gunthorpe <logang(a)deltatee.com> Signed-off-by: Jon Mason <jdmason(a)kudzu.us> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xiaomeng Zhang <zhangxiaomeng13(a)huawei.com> --- drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c index 0a94c634ddc2..b5f93f07e22a 100644 --- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c +++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c @@ -288,7 +288,7 @@ static int switchtec_ntb_mw_set_trans(struct ntb_dev *ntb, int pidx, int widx, if (size != 0 && xlate_pos < 12) return -EINVAL; - if (!IS_ALIGNED(addr, BIT_ULL(xlate_pos))) { + if (xlate_pos >= 0 && !IS_ALIGNED(addr, BIT_ULL(xlate_pos))) { /* * In certain circumstances we can get a buffer that is * not aligned to its size. (Most of the time -- 2.34.1

2 1

[PATCH OLK-6.6] thermal: int340x: Add NULL check for adev
by Xiaomeng Zhang 23 Apr '25

23 Apr '25

From: Chenyuan Yang <chenyuan0y(a)gmail.com> stable inclusion from stable-v6.6.87 commit 2542a3f70e563a9e70e7ded314286535a3321bdb category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC1QSY CVE: CVE-2025-23136 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 2542a3f70e563a9e70e7ded314286535a3321bdb ] Not all devices have an ACPI companion fwnode, so adev might be NULL. This is similar to the commit cd2fd6eab480 ("platform/x86: int3472: Check for adev == NULL"). Add a check for adev not being set and return -ENODEV in that case to avoid a possible NULL pointer deref in int3402_thermal_probe(). Note, under the same directory, int3400_thermal_probe() has such a check. Fixes: 77e337c6e23e ("Thermal: introduce INT3402 thermal driver") Signed-off-by: Chenyuan Yang <chenyuan0y(a)gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig(a)baylibre.com> Link: https://patch.msgid.link/20250313043611.1212116-1-chenyuan0y@gmail.com [ rjw: Subject edit, added Fixes: ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Xiaomeng Zhang <zhangxiaomeng13(a)huawei.com> --- drivers/thermal/intel/int340x_thermal/int3402_thermal.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/thermal/intel/int340x_thermal/int3402_thermal.c b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c index 43fa351e2b9e..b7fdf25bfd23 100644 --- a/drivers/thermal/intel/int340x_thermal/int3402_thermal.c +++ b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c @@ -45,6 +45,9 @@ static int int3402_thermal_probe(struct platform_device *pdev) struct int3402_thermal_data *d; int ret; + if (!adev) + return -ENODEV; + if (!acpi_has_method(adev->handle, "_TMP")) return -ENODEV; -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] tracing: Fix use-after-free in print_graph_function_flags during tracer switching
by Tengda Wu 23 Apr '25

23 Apr '25

From: Tengda Wu <wutengda(a)huaweicloud.com> mainline inclusion from mainline-v6.15 commit 7f81f27b1093e4895e87b74143c59c055c3b1906 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IC1QR9 CVE: CVE-2025-22035 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Kairui reported a UAF issue in print_graph_function_flags() during ftrace stress testing [1]. This issue can be reproduced if puting a 'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(), and executing the following script: $ echo function_graph > current_tracer $ cat trace > /dev/null & $ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point $ echo timerlat > current_tracer The root cause lies in the two calls to print_graph_function_flags within print_trace_line during each s_show(): * One through 'iter->trace->print_line()'; * Another through 'event->funcs->trace()', which is hidden in print_trace_fmt() before print_trace_line returns. Tracer switching only updates the former, while the latter continues to use the print_line function of the old tracer, which in the script above is print_graph_function_flags. Moreover, when switching from the 'function_graph' tracer to the 'timerlat' tracer, s_start only calls graph_trace_close of the 'function_graph' tracer to free 'iter->private', but does not set it to NULL. This provides an opportunity for 'event->funcs->trace()' to use an invalid 'iter->private'. To fix this issue, set 'iter->private' to NULL immediately after freeing it in graph_trace_close(), ensuring that an invalid pointer is not passed to other tracers. Additionally, clean up the unnecessary 'iter->private = NULL' during each 'cat trace' when using wakeup and irqsoff tracers. [1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/ Cc: stable(a)vger.kernel.org Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Zheng Yejian <zhengyejian1(a)huawei.com> Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace") Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM0… Reported-by: Kairui Song <kasong(a)tencent.com> Signed-off-by: Tengda Wu <wutengda(a)huaweicloud.com> Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> Signed-off-by: Tengda Wu <wutengda2(a)huawei.com> --- kernel/trace/trace_functions_graph.c | 1 + kernel/trace/trace_irqsoff.c | 2 -- kernel/trace/trace_sched_wakeup.c | 2 -- 3 files changed, 1 insertion(+), 4 deletions(-) diff --git a/kernel/trace/trace_functions_graph.c b/kernel/trace/trace_functions_graph.c index 086af4f5c3e8..20ce7b6bd5ea 100644 --- a/kernel/trace/trace_functions_graph.c +++ b/kernel/trace/trace_functions_graph.c @@ -1473,6 +1473,7 @@ void graph_trace_close(struct trace_iterator *iter) if (data) { free_percpu(data->cpu_data); kfree(data); + iter->private = NULL; } } diff --git a/kernel/trace/trace_irqsoff.c b/kernel/trace/trace_irqsoff.c index 0f36bb59970d..58b2d1932337 100644 --- a/kernel/trace/trace_irqsoff.c +++ b/kernel/trace/trace_irqsoff.c @@ -222,8 +222,6 @@ static void irqsoff_trace_open(struct trace_iterator *iter) { if (is_graph(iter->tr)) graph_trace_open(iter); - else - iter->private = NULL; } static void irqsoff_trace_close(struct trace_iterator *iter) diff --git a/kernel/trace/trace_sched_wakeup.c b/kernel/trace/trace_sched_wakeup.c index 8041bd5e4262..11f4dbd9526b 100644 --- a/kernel/trace/trace_sched_wakeup.c +++ b/kernel/trace/trace_sched_wakeup.c @@ -287,8 +287,6 @@ static void wakeup_trace_open(struct trace_iterator *iter) { if (is_graph(iter->tr)) graph_trace_open(iter); - else - iter->private = NULL; } static void wakeup_trace_close(struct trace_iterator *iter) -- 2.34.1

2 1