- Kernel - mailweb.openeuler.org

[PATCH] efi/memreserve: Register reservations as 'reserved' in /proc/iomem
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Ard Biesheuvel <ardb(a)kernel.org> mainline inclusion from mainline-5.5-rc3 commit ab0eb16205b4 category: bugfix bugzilla: 27656 CVE: NA ------------------------------------------------- Memory regions that are reserved using efi_mem_reserve_persistent() are recorded in a special EFI config table which survives kexec, allowing the incoming kernel to honour them as well. However, such reservations are not visible in /proc/iomem, and so the kexec tools that load the incoming kernel and its initrd into memory may overwrite these reserved regions before the incoming kernel has a chance to reserve them from further use. Address this problem by adding these reservations to /proc/iomem as they are created. Note that reservations that are inherited from a previous kernel are memblock_reserve()'d early on, so they are already visible in /proc/iomem. Tested-by: Masayoshi Mizuma <m.mizuma(a)jp.fujitsu.com> Tested-by: Bhupesh Sharma <bhsharma(a)redhat.com> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Reviewed-by: Bhupesh Sharma <bhsharma(a)redhat.com> Cc: <stable(a)vger.kernel.org> # v5.4+ Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Arvind Sankar <nivedita(a)alum.mit.edu> Cc: linux-efi(a)vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-2-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/firmware/efi/efi.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index e304439..f386a78 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -998,6 +998,24 @@ static int __init efi_memreserve_map_root(void) return 0; } +static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size) +{ + struct resource *res, *parent; + + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); + if (!res) + return -ENOMEM; + + res->name = "reserved"; + res->flags = IORESOURCE_MEM; + res->start = addr; + res->end = addr + size - 1; + + /* we expect a conflict with a 'System RAM' region */ + parent = request_resource_conflict(&iomem_resource, res); + return parent ? request_resource(parent, res) : 0; +} + int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) { struct linux_efi_memreserve *rsv; @@ -1022,7 +1040,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) rsv->entry[index].size = size; memunmap(rsv); - return 0; + return efi_mem_reserve_iomem(addr, size); } memunmap(rsv); } @@ -1032,6 +1050,12 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) if (!rsv) return -ENOMEM; + rc = efi_mem_reserve_iomem(__pa(rsv), SZ_4K); + if (rc) { + free_page((unsigned long)rsv); + return rc; + } + /* * The memremap() call above assumes that a linux_efi_memreserve entry * never crosses a page boundary, so let's ensure that this remains true @@ -1048,7 +1072,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) efi_memreserve_root->next = __pa(rsv); spin_unlock(&efi_mem_reserve_persistent_lock); - return 0; + return efi_mem_reserve_iomem(addr, size); } static int __init efi_memreserve_root_init(void) -- 1.8.3

1 0

[PATCH] compat_ioctl: handle SIOCOUTQNSD
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Arnd Bergmann <arnd(a)arndb.de> mainline inclusion from mainline-v5.5-rc1 commit 9d7bf41fafa5b5ddd4c13eb39446b0045f0a8167 category: bugfix bugzilla: 26804 CVE: NA ------------------------------------- Unlike the normal SIOCOUTQ, SIOCOUTQNSD was never handled in compat mode. Add it to the common socket compat handler along with similar ones. Fixes: 2f4e1b397097 ("tcp: ioctl type SIOCOUTQNSD returns amount of data not sent") Cc: Eric Dumazet <edumazet(a)google.com> Cc: netdev(a)vger.kernel.org Cc: "David S. Miller" <davem(a)davemloft.net> Signed-off-by: Arnd Bergmann <arnd(a)arndb.de> Signed-off-by: guodeqing <geffrey.guo(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/socket.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/socket.c b/net/socket.c index 1290aad..1030a61 100644 --- a/net/socket.c +++ b/net/socket.c @@ -3240,6 +3240,7 @@ static int compat_sock_ioctl_trans(struct file *file, struct socket *sock, case SIOCSARP: case SIOCGARP: case SIOCDARP: + case SIOCOUTQNSD: case SIOCATMARK: return sock_do_ioctl(net, sock, cmd, arg); } -- 1.8.3

1 0

[PATCH 01/43] chardev: Avoid potential use-after-free in 'chrdev_open()'
by Yang Yingliang 16 Apr '20

16 Apr '20

From: Will Deacon <will(a)kernel.org> commit 68faa679b8be1a74e6663c21c3a9d25d32f1c079 upstream. 'chrdev_open()' calls 'cdev_get()' to obtain a reference to the 'struct cdev *' stashed in the 'i_cdev' field of the target inode structure. If the pointer is NULL, then it is initialised lazily by looking up the kobject in the 'cdev_map' and so the whole procedure is protected by the 'cdev_lock' spinlock to serialise initialisation of the shared pointer. Unfortunately, it is possible for the initialising thread to fail *after* installing the new pointer, for example if the subsequent '->open()' call on the file fails. In this case, 'cdev_put()' is called, the reference count on the kobject is dropped and, if nobody else has taken a reference, the release function is called which finally clears 'inode->i_cdev' from 'cdev_purge()' before potentially freeing the object. The problem here is that a racing thread can happily take the 'cdev_lock' and see the non-NULL pointer in the inode, which can result in a refcount increment from zero and a warning: | ------------[ cut here ]------------ | refcount_t: addition on 0; use-after-free. | WARNING: CPU: 2 PID: 6385 at lib/refcount.c:25 refcount_warn_saturate+0x6d/0xf0 | Modules linked in: | CPU: 2 PID: 6385 Comm: repro Not tainted 5.5.0-rc2+ #22 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 | RIP: 0010:refcount_warn_saturate+0x6d/0xf0 | Code: 05 55 9a 15 01 01 e8 9d aa c8 ff 0f 0b c3 80 3d 45 9a 15 01 00 75 ce 48 c7 c7 00 9c 62 b3 c6 08 | RSP: 0018:ffffb524c1b9bc70 EFLAGS: 00010282 | RAX: 0000000000000000 RBX: ffff9e9da1f71390 RCX: 0000000000000000 | RDX: ffff9e9dbbd27618 RSI: ffff9e9dbbd18798 RDI: ffff9e9dbbd18798 | RBP: 0000000000000000 R08: 000000000000095f R09: 0000000000000039 | R10: 0000000000000000 R11: ffffb524c1b9bb20 R12: ffff9e9da1e8c700 | R13: ffffffffb25ee8b0 R14: 0000000000000000 R15: ffff9e9da1e8c700 | FS: 00007f3b87d26700(0000) GS:ffff9e9dbbd00000(0000) knlGS:0000000000000000 | CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 | CR2: 00007fc16909c000 CR3: 000000012df9c000 CR4: 00000000000006e0 | DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 | DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 | Call Trace: | kobject_get+0x5c/0x60 | cdev_get+0x2b/0x60 | chrdev_open+0x55/0x220 | ? cdev_put.part.3+0x20/0x20 | do_dentry_open+0x13a/0x390 | path_openat+0x2c8/0x1470 | do_filp_open+0x93/0x100 | ? selinux_file_ioctl+0x17f/0x220 | do_sys_open+0x186/0x220 | do_syscall_64+0x48/0x150 | entry_SYSCALL_64_after_hwframe+0x44/0xa9 | RIP: 0033:0x7f3b87efcd0e | Code: 89 54 24 08 e8 a3 f4 ff ff 8b 74 24 0c 48 8b 3c 24 41 89 c0 44 8b 54 24 08 b8 01 01 00 00 89 f4 | RSP: 002b:00007f3b87d259f0 EFLAGS: 00000293 ORIG_RAX: 0000000000000101 | RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f3b87efcd0e | RDX: 0000000000000000 RSI: 00007f3b87d25a80 RDI: 00000000ffffff9c | RBP: 00007f3b87d25e90 R08: 0000000000000000 R09: 0000000000000000 | R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe188f504e | R13: 00007ffe188f504f R14: 00007f3b87d26700 R15: 0000000000000000 | ---[ end trace 24f53ca58db8180a ]--- Since 'cdev_get()' can already fail to obtain a reference, simply move it over to use 'kobject_get_unless_zero()' instead of 'kobject_get()', which will cause the racing thread to return -ENXIO if the initialising thread fails unexpectedly. Cc: Hillf Danton <hdanton(a)sina.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Al Viro <viro(a)zeniv.linux.org.uk> Reported-by: syzbot+82defefbbd8527e1c2cb(a)syzkaller.appspotmail.com Signed-off-by: Will Deacon <will(a)kernel.org> Cc: stable <stable(a)vger.kernel.org> Link: https://lore.kernel.org/r/20191219120203.32691-1-will@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/char_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/char_dev.c b/fs/char_dev.c index 8a63cfa..5fffd50 100644 --- a/fs/char_dev.c +++ b/fs/char_dev.c @@ -361,7 +361,7 @@ static struct kobject *cdev_get(struct cdev *p) if (owner && !try_module_get(owner)) return NULL; - kobj = kobject_get(&p->kobj); + kobj = kobject_get_unless_zero(&p->kobj); if (!kobj) module_put(owner); return kobj; -- 1.8.3

1 42

[PATCH] net: hns3: modify the Makefile
by Yang Yingliang 15 Apr '20

15 Apr '20

From: youshengzui <youshengzui(a)huawei.com> driver inclusion category: feature bugzilla: NA CVE: NA ------------------------------ This patch is used to modify the Makefile Signed-off-by: youshengzui <youshengzui(a)huawei.com> Reviewed-by: Weiwei Deng <dengweiwei(a)huawei.com> Reviewed-by: Junxin Chen <chenjunxin1(a)huawei.com> Reviewed-by: Yongxin Li <liyongxin1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81..f53983e 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -28,7 +28,7 @@ ccflags-y += -I$(PWD) \ obj-$(CONFIG_HNS3) += hnae3.o #### compile hns3.ko -HNS3_OBJS = hns3_enet.o \ +HNS3_OBJS = hns3_enet.o \ hns3_ethtool.o \ hns3_debugfs.o HNS3_OBJS_IT = hns-customer/hns3_enet_it.o \ -- 1.8.3

1 0

[PATCH 0/6] Support MPAM ACPI
by Wang ShaoBo 14 Apr '20

14 Apr '20

hulk inclusion category: feature bugzilla: 28055 CVE: NA ------------------------------ MPAM driver temporarily force initializing cache/memory unwillingly, Futher We should make it compatible with P2, P4, P6 machine in the future, it's eager to introduce new method to get MSCs' info from BIOS/DT. Note arm hasn't reached a final conclusion about MPAM ACPI Description, BIOS implemented one temporary version according to v1 spec. MPAM ACPI Table organized as follow: *******Address increased by raw******** [DIE0] Memory node: mc[proximity:0] [DIE1] Memory node: mc[proximity:1] [DIE0] Memory node: mc[proximity:0] [DIE2] Memory node: mc[proximity:2] [DIE3] Memory node: mc[proximity:3] [DIE0] Cache node: cache[PPTT_ref:$a] [PARTITION0] Cache node: cache[PPTT_ref:$a] [PARTITION1] Cache node: cache[PPTT_ref:$a] [PARTITION2] Cache node: cache[PPTT_ref:$a] [PARTITION3] Cache node: cache[PPTT_ref:$a] [PARTITION4] Cache node: cache[PPTT_ref:$a] [PARTITION5] Cache node: cache[PPTT_ref:$a] [PARTITION6] Cache node: cache[PPTT_ref:$a] [PARTITION7] Cache node: cache[PPTT_ref:$a] [DIE1] Cache node: cache[PPTT_ref:$b] [PARTITION0] Cache node: cache[PPTT_ref:$b] [PARTITION1] Cache node: cache[PPTT_ref:$b] ... We use PPTT_ref to decide which DIE the cache node belongs to, and use proximity to decide memory node. it is tricky, but still usefull. James Morse (3): ACPI / processor: Add helper to convert acpi_id to a phys_cpuid ACPI / PPTT: Add helper to validate cache nodes from an offset [dead] ACPI / PPTT: Filthy hack to find _a_ backwards reference in the PPTT [ROTTEN] Wang ShaoBo (3): ACPI / PPTT: cacheinfo: Label caches based on fw_token ACPI 6.x: Add definitions for MPAM table MPAM / ACPI: Refactoring MPAM init process and set MPAM ACPI as entrance arch/arm64/Kconfig | 2 + arch/arm64/include/asm/acpi.h | 4 + arch/arm64/include/asm/mpam_resource.h | 15 +- arch/arm64/include/asm/mpam_sched.h | 8 +- arch/arm64/kernel/mpam.c | 246 ++++++++++++++++++------ drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/mpam.c | 249 +++++++++++++++++++++++++ drivers/acpi/pptt.c | 143 ++++++++++++++ drivers/acpi/processor_core.c | 16 ++ include/acpi/actbl2.h | 58 ++++++ include/acpi/processor.h | 1 + include/linux/acpi.h | 8 + 13 files changed, 698 insertions(+), 56 deletions(-) create mode 100644 drivers/acpi/arm64/mpam.c -- 2.20.1

1 6

[PATCH 1/5] mm/vmalloc.c: keep track of free blocks for vmap allocation
by Yang Yingliang 14 Apr '20

14 Apr '20

From: "Uladzislau Rezki (Sony)" <urezki(a)gmail.com> mainline inclusion from mainline-5.2-rc1 commit 68ad4a3304335358f95a417f2a2b0c909e5119c4 category: bugfix bugzilla: 15766 CVE: NA ------------------------------------------------- Patch series "improve vmap allocation", v3. Objective --------- Please have a look for the description at: https://lkml.org/lkml/2018/10/19/786 but let me also summarize it a bit here as well. The current implementation has O(N) complexity. Requests with different permissive parameters can lead to long allocation time. When i say "long" i mean milliseconds. Description ----------- This approach organizes the KVA memory layout into free areas of the 1-ULONG_MAX range, i.e. an allocation is done over free areas lookups, instead of finding a hole between two busy blocks. It allows to have lower number of objects which represent the free space, therefore to have less fragmented memory allocator. Because free blocks are always as large as possible. It uses the augment tree where all free areas are sorted in ascending order of va->va_start address in pair with linked list that provides O(1) access to prev/next elements. Since the tree is augment, we also maintain the "subtree_max_size" of VA that reflects a maximum available free block in its left or right sub-tree. Knowing that, we can easily traversal toward the lowest (left most path) free area. Allocation: ~O(log(N)) complexity. It is sequential allocation method therefore tends to maximize locality. The search is done until a first suitable block is large enough to encompass the requested parameters. Bigger areas are split. I copy paste here the description of how the area is split, since i described it in https://lkml.org/lkml/2018/10/19/786 <snip> A free block can be split by three different ways. Their names are FL_FIT_TYPE, LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested size and alignment fit to a free block. FL_FIT_TYPE - in this case a free block is just removed from the free list/tree because it fully fits. Comparing with current design there is an extra work with rb-tree updating. LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is just cutting a free block. It is as fast as a current design. Most of the vmalloc allocations just end up with this case, because the edge is always aligned to 1. NE_FIT_TYPE - Is much less common case. Basically it happens when requested size and alignment does not fit left nor right edges, i.e. it is between them. In this case during splitting we have to build a remaining left free area and place it back to the free list/tree. Comparing with current design there are two extra steps. First one is we have to allocate a new vmap_area structure. Second one we have to insert that remaining free block to the address sorted list/tree. In order to optimize a first case there is a cache with free_vmap objects. Instead of allocating from slab we just take an object from the cache and reuse it. Second one is pretty optimized. Since we know a start point in the tree we do not do a search from the top. Instead a traversal begins from a rb-tree node we split. <snip> De-allocation. ~O(log(N)) complexity. An area is not inserted straight away to the tree/list, instead we identify the spot first, checking if it can be merged around neighbors. The list provides O(1) access to prev/next, so it is pretty fast to check it. Summarizing. If merged then large coalesced areas are created, if not the area is just linked making more fragments. There is one more thing that i should mention here. After modification of VA node, its subtree_max_size is updated if it was/is the biggest area in its left or right sub-tree. Apart of that it can also be populated back to upper levels to fix the tree. For more details please have a look at the __augment_tree_propagate_from() function and the description. Tests and stressing ------------------- I use the "test_vmalloc.sh" test driver available under "tools/testing/selftests/vm/" since 5.1-rc1 kernel. Just trigger "sudo ./test_vmalloc.sh" to find out how to deal with it. Tested on different platforms including x86_64/i686/ARM64/x86_64_NUMA. Regarding last one, i do not have any physical access to NUMA system, therefore i emulated it. The time of stressing is days. If you run the test driver in "stress mode", you also need the patch that is in Andrew's tree but not in Linux 5.1-rc1. So, please apply it: http://git.cmpxchg.org/cgit.cgi/linux-mmotm.git/commit/?id=e0cf7749bade6da3… After massive testing, i have not identified any problems like memory leaks, crashes or kernel panics. I find it stable, but more testing would be good. Performance analysis -------------------- I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another is HiKey960(arm64) board. i5-3320M runs on 4.20 kernel, whereas Hikey960 uses 4.15 kernel. I have both system which could run on 5.1-rc1 as well, but the results have not been ready by time i an writing this. Currently it consist of 8 tests. There are three of them which correspond to different types of splitting(to compare with default). We have 3 ones(see above). Another 5 do allocations in different conditions. a) sudo ./test_vmalloc.sh performance When the test driver is run in "performance" mode, it runs all available tests pinned to first online CPU with sequential execution test order. We do it in order to get stable and repeatable results. Take a look at time difference in "long_busy_list_alloc_test". It is not surprising because the worst case is O(N). # i5-3320M How many cycles all tests took: CPU0=646919905370(default) cycles vs CPU0=193290498550(patched) cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_… # Hikey960 8x CPUs How many cycles all tests took: CPU0=3478683207 cycles vs CPU0=463767978 cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_… b) time sudo ./test_vmalloc.sh test_repeat_count=1 With this configuration, all tests are run on all available online CPUs. Before running each CPU shuffles its tests execution order. It gives random allocation behaviour. So it is rough comparison, but it puts in the picture for sure. # i5-3320M <default> vs <patched> real 101m22.813s real 0m56.805s user 0m0.011s user 0m0.015s sys 0m5.076s sys 0m0.023s # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_… ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_… # Hikey960 8x CPUs <default> vs <patched> real unknown real 4m25.214s user unknown user 0m0.011s sys unknown sys 0m0.670s I did not manage to complete this test on "default Hikey960" kernel version. After 24 hours it was still running, therefore i had to cancel it. That is why real/user/sys are "unknown". This patch (of 3): Currently an allocation of the new vmap area is done over busy list iteration(complexity O(n)) until a suitable hole is found between two busy areas. Therefore each new allocation causes the list being grown. Due to over fragmented list and different permissive parameters an allocation can take a long time. For example on embedded devices it is milliseconds. This patch organizes the KVA memory layout into free areas of the 1-ULONG_MAX range. It uses an augment red-black tree that keeps blocks sorted by their offsets in pair with linked list keeping the free space in order of increasing addresses. Nodes are augmented with the size of the maximum available free block in its left or right sub-tree. Thus, that allows to take a decision and traversal toward the block that will fit and will have the lowest start address, i.e. it is sequential allocation. Allocation: to allocate a new block a search is done over the tree until a suitable lowest(left most) block is large enough to encompass: the requested size, alignment and vstart point. If the block is bigger than requested size - it is split. De-allocation: when a busy vmap area is freed it can either be merged or inserted to the tree. Red-black tree allows efficiently find a spot whereas a linked list provides a constant-time access to previous and next blocks to check if merging can be done. In case of merging of de-allocated memory chunk a large coalesced area is created. Complexity: ~O(log(N)) [urezki(a)gmail.com: v3] Link: http://lkml.kernel.org/r/20190402162531.10888-2-urezki@gmail.com [urezki(a)gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-2-urezki@gmail.com Link: http://lkml.kernel.org/r/20190321190327.11813-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki(a)gmail.com> Reviewed-by: Roman Gushchin <guro(a)fb.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Matthew Wilcox <willy(a)infradead.org> Cc: Thomas Garnier <thgarnie(a)google.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko(a)sonymobile.com> Cc: Steven Rostedt <rostedt(a)goodmis.org> Cc: Joel Fernandes <joelaf(a)google.com> Cc: Thomas Gleixner <tglx(a)linutronix.de> Cc: Ingo Molnar <mingo(a)elte.hu> Cc: Tejun Heo <tj(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> (cherry picked from commit 68ad4a3304335358f95a417f2a2b0c909e5119c4) Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/vmalloc.h | 6 +- mm/vmalloc.c | 1004 +++++++++++++++++++++++++++++++++++------------ 2 files changed, 763 insertions(+), 247 deletions(-) diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 398e9c9..ad483378 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -45,12 +45,16 @@ struct vm_struct { struct vmap_area { unsigned long va_start; unsigned long va_end; + + /* + * Largest available free size in subtree. + */ + unsigned long subtree_max_size; unsigned long flags; struct rb_node rb_node; /* address sorted rbtree */ struct list_head list; /* address sorted list */ struct llist_node purge_list; /* "lazy purge" list */ struct vm_struct *vm; - struct rcu_head rcu_head; }; /* diff --git a/mm/vmalloc.c b/mm/vmalloc.c index f49ff8a..8b134c0 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -31,6 +31,7 @@ #include <linux/compiler.h> #include <linux/llist.h> #include <linux/bitops.h> +#include <linux/rbtree_augmented.h> #include <linux/uaccess.h> #include <asm/tlbflush.h> @@ -331,14 +332,67 @@ unsigned long vmalloc_to_pfn(const void *vmalloc_addr) LIST_HEAD(vmap_area_list); static LLIST_HEAD(vmap_purge_list); static struct rb_root vmap_area_root = RB_ROOT; +static bool vmap_initialized __read_mostly; -/* The vmap cache globals are protected by vmap_area_lock */ -static struct rb_node *free_vmap_cache; -static unsigned long cached_hole_size; -static unsigned long cached_vstart; -static unsigned long cached_align; +/* + * This kmem_cache is used for vmap_area objects. Instead of + * allocating from slab we reuse an object from this cache to + * make things faster. Especially in "no edge" splitting of + * free block. + */ +static struct kmem_cache *vmap_area_cachep; + +/* + * This linked list is used in pair with free_vmap_area_root. + * It gives O(1) access to prev/next to perform fast coalescing. + */ +static LIST_HEAD(free_vmap_area_list); + +/* + * This augment red-black tree represents the free vmap space. + * All vmap_area objects in this tree are sorted by va->va_start + * address. It is used for allocation and merging when a vmap + * object is released. + * + * Each vmap_area node contains a maximum available free block + * of its sub-tree, right or left. Therefore it is possible to + * find a lowest match of free area. + */ +static struct rb_root free_vmap_area_root = RB_ROOT; + +static __always_inline unsigned long +va_size(struct vmap_area *va) +{ + return (va->va_end - va->va_start); +} + +static __always_inline unsigned long +get_subtree_max_size(struct rb_node *node) +{ + struct vmap_area *va; + + va = rb_entry_safe(node, struct vmap_area, rb_node); + return va ? va->subtree_max_size : 0; +} -static unsigned long vmap_area_pcpu_hole; +/* + * Gets called when remove the node and rotate. + */ +static __always_inline unsigned long +compute_subtree_max_size(struct vmap_area *va) +{ + return max3(va_size(va), + get_subtree_max_size(va->rb_node.rb_left), + get_subtree_max_size(va->rb_node.rb_right)); +} + +RB_DECLARE_CALLBACKS(static, free_vmap_area_rb_augment_cb, + struct vmap_area, rb_node, unsigned long, subtree_max_size, + compute_subtree_max_size) + +static void purge_vmap_area_lazy(void); +static BLOCKING_NOTIFIER_HEAD(vmap_notify_list); +static unsigned long lazy_max_pages(void); static struct vmap_area *__find_vmap_area(unsigned long addr) { @@ -359,41 +413,522 @@ static struct vmap_area *__find_vmap_area(unsigned long addr) return NULL; } -static void __insert_vmap_area(struct vmap_area *va) -{ - struct rb_node **p = &vmap_area_root.rb_node; - struct rb_node *parent = NULL; - struct rb_node *tmp; +/* + * This function returns back addresses of parent node + * and its left or right link for further processing. + */ +static __always_inline struct rb_node ** +find_va_links(struct vmap_area *va, + struct rb_root *root, struct rb_node *from, + struct rb_node **parent) +{ + struct vmap_area *tmp_va; + struct rb_node **link; + + if (root) { + link = &root->rb_node; + if (unlikely(!*link)) { + *parent = NULL; + return link; + } + } else { + link = &from; + } - while (*p) { - struct vmap_area *tmp_va; + /* + * Go to the bottom of the tree. When we hit the last point + * we end up with parent rb_node and correct direction, i name + * it link, where the new va->rb_node will be attached to. + */ + do { + tmp_va = rb_entry(*link, struct vmap_area, rb_node); - parent = *p; - tmp_va = rb_entry(parent, struct vmap_area, rb_node); - if (va->va_start < tmp_va->va_end) - p = &(*p)->rb_left; - else if (va->va_end > tmp_va->va_start) - p = &(*p)->rb_right; + /* + * During the traversal we also do some sanity check. + * Trigger the BUG() if there are sides(left/right) + * or full overlaps. + */ + if (va->va_start < tmp_va->va_end && + va->va_end <= tmp_va->va_start) + link = &(*link)->rb_left; + else if (va->va_end > tmp_va->va_start && + va->va_start >= tmp_va->va_end) + link = &(*link)->rb_right; else BUG(); + } while (*link); + + *parent = &tmp_va->rb_node; + return link; +} + +static __always_inline struct list_head * +get_va_next_sibling(struct rb_node *parent, struct rb_node **link) +{ + struct list_head *list; + + if (unlikely(!parent)) + /* + * The red-black tree where we try to find VA neighbors + * before merging or inserting is empty, i.e. it means + * there is no free vmap space. Normally it does not + * happen but we handle this case anyway. + */ + return NULL; + + list = &rb_entry(parent, struct vmap_area, rb_node)->list; + return (&parent->rb_right == link ? list->next : list); +} + +static __always_inline void +link_va(struct vmap_area *va, struct rb_root *root, + struct rb_node *parent, struct rb_node **link, struct list_head *head) +{ + /* + * VA is still not in the list, but we can + * identify its future previous list_head node. + */ + if (likely(parent)) { + head = &rb_entry(parent, struct vmap_area, rb_node)->list; + if (&parent->rb_right != link) + head = head->prev; } - rb_link_node(&va->rb_node, parent, p); - rb_insert_color(&va->rb_node, &vmap_area_root); + /* Insert to the rb-tree */ + rb_link_node(&va->rb_node, parent, link); + if (root == &free_vmap_area_root) { + /* + * Some explanation here. Just perform simple insertion + * to the tree. We do not set va->subtree_max_size to + * its current size before calling rb_insert_augmented(). + * It is because of we populate the tree from the bottom + * to parent levels when the node _is_ in the tree. + * + * Therefore we set subtree_max_size to zero after insertion, + * to let __augment_tree_propagate_from() puts everything to + * the correct order later on. + */ + rb_insert_augmented(&va->rb_node, + root, &free_vmap_area_rb_augment_cb); + va->subtree_max_size = 0; + } else { + rb_insert_color(&va->rb_node, root); + } - /* address-sort this list */ - tmp = rb_prev(&va->rb_node); - if (tmp) { - struct vmap_area *prev; - prev = rb_entry(tmp, struct vmap_area, rb_node); - list_add_rcu(&va->list, &prev->list); - } else - list_add_rcu(&va->list, &vmap_area_list); + /* Address-sort this list */ + list_add(&va->list, head); } -static void purge_vmap_area_lazy(void); +static __always_inline void +unlink_va(struct vmap_area *va, struct rb_root *root) +{ + /* + * During merging a VA node can be empty, therefore + * not linked with the tree nor list. Just check it. + */ + if (!RB_EMPTY_NODE(&va->rb_node)) { + if (root == &free_vmap_area_root) + rb_erase_augmented(&va->rb_node, + root, &free_vmap_area_rb_augment_cb); + else + rb_erase(&va->rb_node, root); -static BLOCKING_NOTIFIER_HEAD(vmap_notify_list); + list_del(&va->list); + RB_CLEAR_NODE(&va->rb_node); + } +} + +/* + * This function populates subtree_max_size from bottom to upper + * levels starting from VA point. The propagation must be done + * when VA size is modified by changing its va_start/va_end. Or + * in case of newly inserting of VA to the tree. + * + * It means that __augment_tree_propagate_from() must be called: + * - After VA has been inserted to the tree(free path); + * - After VA has been shrunk(allocation path); + * - After VA has been increased(merging path). + * + * Please note that, it does not mean that upper parent nodes + * and their subtree_max_size are recalculated all the time up + * to the root node. + * + * 4--8 + * /\ + * / \ + * / \ + * 2--2 8--8 + * + * For example if we modify the node 4, shrinking it to 2, then + * no any modification is required. If we shrink the node 2 to 1 + * its subtree_max_size is updated only, and set to 1. If we shrink + * the node 8 to 6, then its subtree_max_size is set to 6 and parent + * node becomes 4--6. + */ +static __always_inline void +augment_tree_propagate_from(struct vmap_area *va) +{ + struct rb_node *node = &va->rb_node; + unsigned long new_va_sub_max_size; + + while (node) { + va = rb_entry(node, struct vmap_area, rb_node); + new_va_sub_max_size = compute_subtree_max_size(va); + + /* + * If the newly calculated maximum available size of the + * subtree is equal to the current one, then it means that + * the tree is propagated correctly. So we have to stop at + * this point to save cycles. + */ + if (va->subtree_max_size == new_va_sub_max_size) + break; + + va->subtree_max_size = new_va_sub_max_size; + node = rb_parent(&va->rb_node); + } +} + +static void +insert_vmap_area(struct vmap_area *va, + struct rb_root *root, struct list_head *head) +{ + struct rb_node **link; + struct rb_node *parent; + + link = find_va_links(va, root, NULL, &parent); + link_va(va, root, parent, link, head); +} + +static void +insert_vmap_area_augment(struct vmap_area *va, + struct rb_node *from, struct rb_root *root, + struct list_head *head) +{ + struct rb_node **link; + struct rb_node *parent; + + if (from) + link = find_va_links(va, NULL, from, &parent); + else + link = find_va_links(va, root, NULL, &parent); + + link_va(va, root, parent, link, head); + augment_tree_propagate_from(va); +} + +/* + * Merge de-allocated chunk of VA memory with previous + * and next free blocks. If coalesce is not done a new + * free area is inserted. If VA has been merged, it is + * freed. + */ +static __always_inline void +merge_or_add_vmap_area(struct vmap_area *va, + struct rb_root *root, struct list_head *head) +{ + struct vmap_area *sibling; + struct list_head *next; + struct rb_node **link; + struct rb_node *parent; + bool merged = false; + + /* + * Find a place in the tree where VA potentially will be + * inserted, unless it is merged with its sibling/siblings. + */ + link = find_va_links(va, root, NULL, &parent); + + /* + * Get next node of VA to check if merging can be done. + */ + next = get_va_next_sibling(parent, link); + if (unlikely(next == NULL)) + goto insert; + + /* + * start end + * | | + * |<------VA------>|<-----Next----->| + * | | + * start end + */ + if (next != head) { + sibling = list_entry(next, struct vmap_area, list); + if (sibling->va_start == va->va_end) { + sibling->va_start = va->va_start; + + /* Check and update the tree if needed. */ + augment_tree_propagate_from(sibling); + + /* Remove this VA, it has been merged. */ + unlink_va(va, root); + + /* Free vmap_area object. */ + kmem_cache_free(vmap_area_cachep, va); + + /* Point to the new merged area. */ + va = sibling; + merged = true; + } + } + + /* + * start end + * | | + * |<-----Prev----->|<------VA------>| + * | | + * start end + */ + if (next->prev != head) { + sibling = list_entry(next->prev, struct vmap_area, list); + if (sibling->va_end == va->va_start) { + sibling->va_end = va->va_end; + + /* Check and update the tree if needed. */ + augment_tree_propagate_from(sibling); + + /* Remove this VA, it has been merged. */ + unlink_va(va, root); + + /* Free vmap_area object. */ + kmem_cache_free(vmap_area_cachep, va); + + return; + } + } + +insert: + if (!merged) { + link_va(va, root, parent, link, head); + augment_tree_propagate_from(va); + } +} + +static __always_inline bool +is_within_this_va(struct vmap_area *va, unsigned long size, + unsigned long align, unsigned long vstart) +{ + unsigned long nva_start_addr; + + if (va->va_start > vstart) + nva_start_addr = ALIGN(va->va_start, align); + else + nva_start_addr = ALIGN(vstart, align); + + /* Can be overflowed due to big size or alignment. */ + if (nva_start_addr + size < nva_start_addr || + nva_start_addr < vstart) + return false; + + return (nva_start_addr + size <= va->va_end); +} + +/* + * Find the first free block(lowest start address) in the tree, + * that will accomplish the request corresponding to passing + * parameters. + */ +static __always_inline struct vmap_area * +find_vmap_lowest_match(unsigned long size, + unsigned long align, unsigned long vstart) +{ + struct vmap_area *va; + struct rb_node *node; + unsigned long length; + + /* Start from the root. */ + node = free_vmap_area_root.rb_node; + + /* Adjust the search size for alignment overhead. */ + length = size + align - 1; + + while (node) { + va = rb_entry(node, struct vmap_area, rb_node); + + if (get_subtree_max_size(node->rb_left) >= length && + vstart < va->va_start) { + node = node->rb_left; + } else { + if (is_within_this_va(va, size, align, vstart)) + return va; + + /* + * Does not make sense to go deeper towards the right + * sub-tree if it does not have a free block that is + * equal or bigger to the requested search length. + */ + if (get_subtree_max_size(node->rb_right) >= length) { + node = node->rb_right; + continue; + } + + /* + * OK. We roll back and find the fist right sub-tree, + * that will satisfy the search criteria. It can happen + * only once due to "vstart" restriction. + */ + while ((node = rb_parent(node))) { + va = rb_entry(node, struct vmap_area, rb_node); + if (is_within_this_va(va, size, align, vstart)) + return va; + + if (get_subtree_max_size(node->rb_right) >= length && + vstart <= va->va_start) { + node = node->rb_right; + break; + } + } + } + } + + return NULL; +} + +enum fit_type { + NOTHING_FIT = 0, + FL_FIT_TYPE = 1, /* full fit */ + LE_FIT_TYPE = 2, /* left edge fit */ + RE_FIT_TYPE = 3, /* right edge fit */ + NE_FIT_TYPE = 4 /* no edge fit */ +}; + +static __always_inline enum fit_type +classify_va_fit_type(struct vmap_area *va, + unsigned long nva_start_addr, unsigned long size) +{ + enum fit_type type; + + /* Check if it is within VA. */ + if (nva_start_addr < va->va_start || + nva_start_addr + size > va->va_end) + return NOTHING_FIT; + + /* Now classify. */ + if (va->va_start == nva_start_addr) { + if (va->va_end == nva_start_addr + size) + type = FL_FIT_TYPE; + else + type = LE_FIT_TYPE; + } else if (va->va_end == nva_start_addr + size) { + type = RE_FIT_TYPE; + } else { + type = NE_FIT_TYPE; + } + + return type; +} + +static __always_inline int +adjust_va_to_fit_type(struct vmap_area *va, + unsigned long nva_start_addr, unsigned long size, + enum fit_type type) +{ + struct vmap_area *lva; + + if (type == FL_FIT_TYPE) { + /* + * No need to split VA, it fully fits. + * + * | | + * V NVA V + * |---------------| + */ + unlink_va(va, &free_vmap_area_root); + kmem_cache_free(vmap_area_cachep, va); + } else if (type == LE_FIT_TYPE) { + /* + * Split left edge of fit VA. + * + * | | + * V NVA V R + * |-------|-------| + */ + va->va_start += size; + } else if (type == RE_FIT_TYPE) { + /* + * Split right edge of fit VA. + * + * | | + * L V NVA V + * |-------|-------| + */ + va->va_end = nva_start_addr; + } else if (type == NE_FIT_TYPE) { + /* + * Split no edge of fit VA. + * + * | | + * L V NVA V R + * |---|-------|---| + */ + lva = kmem_cache_alloc(vmap_area_cachep, GFP_NOWAIT); + if (unlikely(!lva)) + return -1; + + /* + * Build the remainder. + */ + lva->va_start = va->va_start; + lva->va_end = nva_start_addr; + + /* + * Shrink this VA to remaining size. + */ + va->va_start = nva_start_addr + size; + } else { + return -1; + } + + if (type != FL_FIT_TYPE) { + augment_tree_propagate_from(va); + + if (type == NE_FIT_TYPE) + insert_vmap_area_augment(lva, &va->rb_node, + &free_vmap_area_root, &free_vmap_area_list); + } + + return 0; +} + +/* + * Returns a start address of the newly allocated area, if success. + * Otherwise a vend is returned that indicates failure. + */ +static __always_inline unsigned long +__alloc_vmap_area(unsigned long size, unsigned long align, + unsigned long vstart, unsigned long vend, int node) +{ + unsigned long nva_start_addr; + struct vmap_area *va; + enum fit_type type; + int ret; + + va = find_vmap_lowest_match(size, align, vstart); + if (unlikely(!va)) + return vend; + + if (va->va_start > vstart) + nva_start_addr = ALIGN(va->va_start, align); + else + nva_start_addr = ALIGN(vstart, align); + + /* Check the "vend" restriction. */ + if (nva_start_addr + size > vend) + return vend; + + /* Classify what we have found. */ + type = classify_va_fit_type(va, nva_start_addr, size); + if (WARN_ON_ONCE(type == NOTHING_FIT)) + return vend; + + /* Update the free vmap_area. */ + ret = adjust_va_to_fit_type(va, nva_start_addr, size, type); + if (ret) + return vend; + + return nva_start_addr; +} /* * Allocate a region of KVA of the specified size and alignment, within the @@ -405,18 +940,19 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, int node, gfp_t gfp_mask) { struct vmap_area *va; - struct rb_node *n; unsigned long addr; int purged = 0; - struct vmap_area *first; BUG_ON(!size); BUG_ON(offset_in_page(size)); BUG_ON(!is_power_of_2(align)); + if (unlikely(!vmap_initialized)) + return ERR_PTR(-EBUSY); + might_sleep(); - va = kmalloc_node(sizeof(struct vmap_area), + va = kmem_cache_alloc_node(vmap_area_cachep, gfp_mask & GFP_RECLAIM_MASK, node); if (unlikely(!va)) return ERR_PTR(-ENOMEM); @@ -429,87 +965,20 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, retry: spin_lock(&vmap_area_lock); - /* - * Invalidate cache if we have more permissive parameters. - * cached_hole_size notes the largest hole noticed _below_ - * the vmap_area cached in free_vmap_cache: if size fits - * into that hole, we want to scan from vstart to reuse - * the hole instead of allocating above free_vmap_cache. - * Note that __free_vmap_area may update free_vmap_cache - * without updating cached_hole_size or cached_align. - */ - if (!free_vmap_cache || - size < cached_hole_size || - vstart < cached_vstart || - align < cached_align) { -nocache: - cached_hole_size = 0; - free_vmap_cache = NULL; - } - /* record if we encounter less permissive parameters */ - cached_vstart = vstart; - cached_align = align; - - /* find starting point for our search */ - if (free_vmap_cache) { - first = rb_entry(free_vmap_cache, struct vmap_area, rb_node); - addr = ALIGN(first->va_end, align); - if (addr < vstart) - goto nocache; - if (addr + size < addr) - goto overflow; - - } else { - addr = ALIGN(vstart, align); - if (addr + size < addr) - goto overflow; - - n = vmap_area_root.rb_node; - first = NULL; - - while (n) { - struct vmap_area *tmp; - tmp = rb_entry(n, struct vmap_area, rb_node); - if (tmp->va_end >= addr) { - first = tmp; - if (tmp->va_start <= addr) - break; - n = n->rb_left; - } else - n = n->rb_right; - } - - if (!first) - goto found; - } - /* from the starting point, walk areas until a suitable hole is found */ - while (addr + size > first->va_start && addr + size <= vend) { - if (addr + cached_hole_size < first->va_start) - cached_hole_size = first->va_start - addr; - addr = ALIGN(first->va_end, align); - if (addr + size < addr) - goto overflow; - - if (list_is_last(&first->list, &vmap_area_list)) - goto found; - - first = list_next_entry(first, list); - } - -found: /* - * Check also calculated address against the vstart, - * because it can be 0 because of big align request. + * If an allocation fails, the "vend" address is + * returned. Therefore trigger the overflow path. */ - if (addr + size > vend || addr < vstart) + addr = __alloc_vmap_area(size, align, vstart, vend, node); + if (unlikely(addr == vend)) goto overflow; va->va_start = addr; va->va_end = addr + size; va->flags = 0; - __insert_vmap_area(va); - free_vmap_cache = &va->rb_node; + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); + spin_unlock(&vmap_area_lock); BUG_ON(!IS_ALIGNED(va->va_start, align)); @@ -538,7 +1007,8 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, if (!(gfp_mask & __GFP_NOWARN) && printk_ratelimit()) pr_warn("vmap allocation for size %lu failed: use vmalloc=<size> to increase size\n", size); - kfree(va); + + kmem_cache_free(vmap_area_cachep, va); return ERR_PTR(-EBUSY); } @@ -558,35 +1028,16 @@ static void __free_vmap_area(struct vmap_area *va) { BUG_ON(RB_EMPTY_NODE(&va->rb_node)); - if (free_vmap_cache) { - if (va->va_end < cached_vstart) { - free_vmap_cache = NULL; - } else { - struct vmap_area *cache; - cache = rb_entry(free_vmap_cache, struct vmap_area, rb_node); - if (va->va_start <= cache->va_start) { - free_vmap_cache = rb_prev(&va->rb_node); - /* - * We don't try to update cached_hole_size or - * cached_align, but it won't go very wrong. - */ - } - } - } - rb_erase(&va->rb_node, &vmap_area_root); - RB_CLEAR_NODE(&va->rb_node); - list_del_rcu(&va->list); - /* - * Track the highest possible candidate for pcpu area - * allocation. Areas outside of vmalloc area can be returned - * here too, consider only end addresses which fall inside - * vmalloc area proper. + * Remove from the busy tree/list. */ - if (va->va_end > VMALLOC_START && va->va_end <= VMALLOC_END) - vmap_area_pcpu_hole = max(vmap_area_pcpu_hole, va->va_end); + unlink_va(va, &vmap_area_root); - kfree_rcu(va, rcu_head); + /* + * Merge VA with its neighbors, otherwise just add it. + */ + merge_or_add_vmap_area(va, + &free_vmap_area_root, &free_vmap_area_list); } /* @@ -787,8 +1238,6 @@ static struct vmap_area *find_vmap_area(unsigned long addr) #define VMAP_BLOCK_SIZE (VMAP_BBMAP_BITS * PAGE_SIZE) -static bool vmap_initialized __read_mostly = false; - struct vmap_block_queue { spinlock_t lock; struct list_head free; @@ -1242,12 +1691,58 @@ void __init vm_area_register_early(struct vm_struct *vm, size_t align) vm_area_add_early(vm); } +static void vmap_init_free_space(void) +{ + unsigned long vmap_start = 1; + const unsigned long vmap_end = ULONG_MAX; + struct vmap_area *busy, *free; + + /* + * B F B B B F + * -|-----|.....|-----|-----|-----|.....|- + * | The KVA space | + * |<--------------------------------->| + */ + list_for_each_entry(busy, &vmap_area_list, list) { + if (busy->va_start - vmap_start > 0) { + free = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (!WARN_ON_ONCE(!free)) { + free->va_start = vmap_start; + free->va_end = busy->va_start; + + insert_vmap_area_augment(free, NULL, + &free_vmap_area_root, + &free_vmap_area_list); + } + } + + vmap_start = busy->va_end; + } + + if (vmap_end - vmap_start > 0) { + free = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (!WARN_ON_ONCE(!free)) { + free->va_start = vmap_start; + free->va_end = vmap_end; + + insert_vmap_area_augment(free, NULL, + &free_vmap_area_root, + &free_vmap_area_list); + } + } +} + void __init vmalloc_init(void) { struct vmap_area *va; struct vm_struct *tmp; int i; + /* + * Create the cache for vmap_area objects. + */ + vmap_area_cachep = KMEM_CACHE(vmap_area, SLAB_PANIC); + for_each_possible_cpu(i) { struct vmap_block_queue *vbq; struct vfree_deferred *p; @@ -1262,16 +1757,21 @@ void __init vmalloc_init(void) /* Import existing vmlist entries. */ for (tmp = vmlist; tmp; tmp = tmp->next) { - va = kzalloc(sizeof(struct vmap_area), GFP_NOWAIT); + va = kmem_cache_zalloc(vmap_area_cachep, GFP_NOWAIT); + if (WARN_ON_ONCE(!va)) + continue; + va->flags = VM_VM_AREA; va->va_start = (unsigned long)tmp->addr; va->va_end = va->va_start + tmp->size; va->vm = tmp; - __insert_vmap_area(va); + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); } - vmap_area_pcpu_hole = VMALLOC_END; - + /* + * Now we can initialize a free vmap space. + */ + vmap_init_free_space(); vmap_initialized = true; } @@ -2375,81 +2875,64 @@ static struct vmap_area *node_to_va(struct rb_node *n) } /** - * pvm_find_next_prev - find the next and prev vmap_area surrounding @end - * @end: target address - * @pnext: out arg for the next vmap_area - * @pprev: out arg for the previous vmap_area + * pvm_find_va_enclose_addr - find the vmap_area @addr belongs to + * @addr: target address * - * Returns: %true if either or both of next and prev are found, - * %false if no vmap_area exists - * - * Find vmap_areas end addresses of which enclose @end. ie. if not - * NULL, *pnext->va_end > @end and *pprev->va_end <= @end. + * Returns: vmap_area if it is found. If there is no such area + * the first highest(reverse order) vmap_area is returned + * i.e. va->va_start < addr && va->va_end < addr or NULL + * if there are no any areas before @addr. */ -static bool pvm_find_next_prev(unsigned long end, - struct vmap_area **pnext, - struct vmap_area **pprev) +static struct vmap_area * +pvm_find_va_enclose_addr(unsigned long addr) { - struct rb_node *n = vmap_area_root.rb_node; - struct vmap_area *va = NULL; + struct vmap_area *va, *tmp; + struct rb_node *n; + + n = free_vmap_area_root.rb_node; + va = NULL; while (n) { - va = rb_entry(n, struct vmap_area, rb_node); - if (end < va->va_end) - n = n->rb_left; - else if (end > va->va_end) + tmp = rb_entry(n, struct vmap_area, rb_node); + if (tmp->va_start <= addr) { + va = tmp; + if (tmp->va_end >= addr) + break; + n = n->rb_right; - else - break; + } else { + n = n->rb_left; + } } - if (!va) - return false; - - if (va->va_end > end) { - *pnext = va; - *pprev = node_to_va(rb_prev(&(*pnext)->rb_node)); - } else { - *pprev = va; - *pnext = node_to_va(rb_next(&(*pprev)->rb_node)); - } - return true; + return va; } /** - * pvm_determine_end - find the highest aligned address between two vmap_areas - * @pnext: in/out arg for the next vmap_area - * @pprev: in/out arg for the previous vmap_area - * @align: alignment - * - * Returns: determined end address + * pvm_determine_end_from_reverse - find the highest aligned address + * of free block below VMALLOC_END + * @va: + * in - the VA we start the search(reverse order); + * out - the VA with the highest aligned end address. * - * Find the highest aligned address between *@pnext and *@pprev below - * VMALLOC_END. *@pnext and *@pprev are adjusted so that the aligned - * down address is between the end addresses of the two vmap_areas. - * - * Please note that the address returned by this function may fall - * inside *@pnext vmap_area. The caller is responsible for checking - * that. + * Returns: determined end address within vmap_area */ -static unsigned long pvm_determine_end(struct vmap_area **pnext, - struct vmap_area **pprev, - unsigned long align) +static unsigned long +pvm_determine_end_from_reverse(struct vmap_area **va, unsigned long align) { - const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); + unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); unsigned long addr; - if (*pnext) - addr = min((*pnext)->va_start & ~(align - 1), vmalloc_end); - else - addr = vmalloc_end; - - while (*pprev && (*pprev)->va_end > addr) { - *pnext = *pprev; - *pprev = node_to_va(rb_prev(&(*pnext)->rb_node)); + if (likely(*va)) { + list_for_each_entry_from_reverse((*va), + &free_vmap_area_list, list) { + addr = min((*va)->va_end & ~(align - 1), vmalloc_end); + if ((*va)->va_start < addr) + return addr; + } } - return addr; + return 0; } /** @@ -2469,12 +2952,12 @@ static unsigned long pvm_determine_end(struct vmap_area **pnext, * to gigabytes. To avoid interacting with regular vmallocs, these * areas are allocated from top. * - * Despite its complicated look, this allocator is rather simple. It - * does everything top-down and scans areas from the end looking for - * matching slot. While scanning, if any of the areas overlaps with - * existing vmap_area, the base address is pulled down to fit the - * area. Scanning is repeated till all the areas fit and then all - * necessary data structures are inserted and the result is returned. + * Despite its complicated look, this allocator is rather simple. It + * does everything top-down and scans free blocks from the end looking + * for matching base. While scanning, if any of the areas do not fit the + * base address is pulled down to fit the area. Scanning is repeated till + * all the areas fit and then all necessary data structures are inserted + * and the result is returned. */ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, const size_t *sizes, int nr_vms, @@ -2482,11 +2965,12 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, { const unsigned long vmalloc_start = ALIGN(VMALLOC_START, align); const unsigned long vmalloc_end = VMALLOC_END & ~(align - 1); - struct vmap_area **vas, *prev, *next; + struct vmap_area **vas, *va; struct vm_struct **vms; int area, area2, last_area, term_area; - unsigned long base, start, end, last_end; + unsigned long base, start, size, end, last_end; bool purged = false; + enum fit_type type; /* verify parameters and allocate data structures */ BUG_ON(offset_in_page(align) || !is_power_of_2(align)); @@ -2522,7 +3006,7 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, goto err_free2; for (area = 0; area < nr_vms; area++) { - vas[area] = kzalloc(sizeof(struct vmap_area), GFP_KERNEL); + vas[area] = kmem_cache_zalloc(vmap_area_cachep, GFP_KERNEL); vms[area] = kzalloc(sizeof(struct vm_struct), GFP_KERNEL); if (!vas[area] || !vms[area]) goto err_free; @@ -2535,49 +3019,29 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, start = offsets[area]; end = start + sizes[area]; - if (!pvm_find_next_prev(vmap_area_pcpu_hole, &next, &prev)) { - base = vmalloc_end - last_end; - goto found; - } - base = pvm_determine_end(&next, &prev, align) - end; + va = pvm_find_va_enclose_addr(vmalloc_end); + base = pvm_determine_end_from_reverse(&va, align) - end; while (true) { - BUG_ON(next && next->va_end <= base + end); - BUG_ON(prev && prev->va_end > base + end); - /* * base might have underflowed, add last_end before * comparing. */ - if (base + last_end < vmalloc_start + last_end) { - spin_unlock(&vmap_area_lock); - if (!purged) { - purge_vmap_area_lazy(); - purged = true; - goto retry; - } - goto err_free; - } + if (base + last_end < vmalloc_start + last_end) + goto overflow; /* - * If next overlaps, move base downwards so that it's - * right below next and then recheck. + * Fitting base has not been found. */ - if (next && next->va_start < base + end) { - base = pvm_determine_end(&next, &prev, align) - end; - term_area = area; - continue; - } + if (va == NULL) + goto overflow; /* - * If prev overlaps, shift down next and prev and move - * base so that it's right below new next and then - * recheck. + * If this VA does not fit, move base downwards and recheck. */ - if (prev && prev->va_end > base + start) { - next = prev; - prev = node_to_va(rb_prev(&next->rb_node)); - base = pvm_determine_end(&next, &prev, align) - end; + if (base + start < va->va_start || base + end > va->va_end) { + va = node_to_va(rb_prev(&va->rb_node)); + base = pvm_determine_end_from_reverse(&va, align) - end; term_area = area; continue; } @@ -2589,21 +3053,40 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, area = (area + nr_vms - 1) % nr_vms; if (area == term_area) break; + start = offsets[area]; end = start + sizes[area]; - pvm_find_next_prev(base + end, &next, &prev); + va = pvm_find_va_enclose_addr(base + end); } -found: + /* we've found a fitting base, insert all va's */ for (area = 0; area < nr_vms; area++) { - struct vmap_area *va = vas[area]; + int ret; - va->va_start = base + offsets[area]; - va->va_end = va->va_start + sizes[area]; - __insert_vmap_area(va); - } + start = base + offsets[area]; + size = sizes[area]; - vmap_area_pcpu_hole = base + offsets[last_area]; + va = pvm_find_va_enclose_addr(start); + if (WARN_ON_ONCE(va == NULL)) + /* It is a BUG(), but trigger recovery instead. */ + goto recovery; + + type = classify_va_fit_type(va, start, size); + if (WARN_ON_ONCE(type == NOTHING_FIT)) + /* It is a BUG(), but trigger recovery instead. */ + goto recovery; + + ret = adjust_va_to_fit_type(va, start, size, type); + if (unlikely(ret)) + goto recovery; + + /* Allocated area. */ + va = vas[area]; + va->va_start = start; + va->va_end = start + size; + + insert_vmap_area(va, &vmap_area_root, &vmap_area_list); + } spin_unlock(&vmap_area_lock); @@ -2615,9 +3098,38 @@ struct vm_struct **pcpu_get_vm_areas(const unsigned long *offsets, kfree(vas); return vms; +recovery: + /* Remove previously inserted areas. */ + while (area--) { + __free_vmap_area(vas[area]); + vas[area] = NULL; + } + +overflow: + spin_unlock(&vmap_area_lock); + if (!purged) { + purge_vmap_area_lazy(); + purged = true; + + /* Before "retry", check if we recover. */ + for (area = 0; area < nr_vms; area++) { + if (vas[area]) + continue; + + vas[area] = kmem_cache_zalloc( + vmap_area_cachep, GFP_KERNEL); + if (!vas[area]) + goto err_free; + } + + goto retry; + } + err_free: for (area = 0; area < nr_vms; area++) { - kfree(vas[area]); + if (vas[area]) + kmem_cache_free(vmap_area_cachep, vas[area]); + kfree(vms[area]); } err_free2: -- 1.8.3

1 4

[PATCH] tmpfs: separate inode number space for each superblock
by Yang Yingliang 14 Apr '20

14 Apr '20

From: zhengbin <zhengbin13(a)huawei.com> hulk inclusion category: bugfix bugzilla: 16611 CVE: NA --------------------------- The last_ino is unsigned int, who is easy to wrap. Like google, for tmpfs, separate inode number space for each superblock, and change inode number type to unsigned long. see details on https://patchwork.kernel.org/patch/11254001 Signed-off-by: zhengbin <zhengbin13(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/shmem_fs.h | 2 ++ mm/shmem.c | 41 ++++++++++++++++++++++++++++++++++++++++- 2 files changed, 42 insertions(+), 1 deletion(-) diff --git a/include/linux/shmem_fs.h b/include/linux/shmem_fs.h index f155dc6..559cd51 100644 --- a/include/linux/shmem_fs.h +++ b/include/linux/shmem_fs.h @@ -38,6 +38,8 @@ struct shmem_sb_info { spinlock_t shrinklist_lock; /* Protects shrinklist */ struct list_head shrinklist; /* List of shinkable inodes */ unsigned long shrinklist_len; /* Length of shrinklist */ + unsigned long __percpu *last_ino_number; /* Last inode number */ + atomic64_t shared_last_ino_number; /* Shared last inode number */ }; static inline struct shmem_inode_info *SHMEM_I(struct inode *inode) diff --git a/mm/shmem.c b/mm/shmem.c index 5b93877..114a2b3 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -2207,6 +2207,40 @@ static int shmem_mmap(struct file *file, struct vm_area_struct *vma) return 0; } +#define SHMEM_LAST_INO_BATCH 1024 + +static unsigned long shmem_get_next_ino(struct shmem_sb_info *sbinfo) +{ + unsigned long *p; + unsigned long res; + int cpu; + + cpu = get_cpu(); + p = per_cpu_ptr(sbinfo->last_ino_number, cpu); + res = *p; + +#ifdef CONFIG_SMP + if (unlikely((res & (SHMEM_LAST_INO_BATCH-1)) == 0)) { + /* + * If OS is 32-bit, next will be truncated(Cause + * inode->i_ino is unsigned long, define next to long.) + */ + long next = atomic64_add_return(SHMEM_LAST_INO_BATCH, + &sbinfo->shared_last_ino_number); + + res = next - SHMEM_LAST_INO_BATCH; + } +#endif + + res++; + /* Avoid 0 in the low 32 bits: might appear deleted */ + if (unlikely(!(unsigned int)res)) + res++; + *p = res; + put_cpu(); + return res; +} + static struct inode *shmem_get_inode(struct super_block *sb, const struct inode *dir, umode_t mode, dev_t dev, unsigned long flags) { @@ -2219,7 +2253,7 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode inode = new_inode(sb); if (inode) { - inode->i_ino = get_next_ino(); + inode->i_ino = shmem_get_next_ino(sbinfo); inode_init_owner(inode, dir, mode); inode->i_blocks = 0; inode->i_atime = inode->i_mtime = inode->i_ctime = current_time(inode); @@ -3534,6 +3568,7 @@ static void shmem_put_super(struct super_block *sb) { struct shmem_sb_info *sbinfo = SHMEM_SB(sb); + free_percpu(sbinfo->last_ino_number); percpu_counter_destroy(&sbinfo->used_blocks); mpol_put(sbinfo->mpol); kfree(sbinfo); @@ -3582,6 +3617,10 @@ int shmem_fill_super(struct super_block *sb, void *data, int silent) spin_lock_init(&sbinfo->stat_lock); if (percpu_counter_init(&sbinfo->used_blocks, 0, GFP_KERNEL)) goto failed; + sbinfo->last_ino_number = alloc_percpu(unsigned long); + if (!sbinfo->last_ino_number) + goto failed; + atomic64_set(&sbinfo->shared_last_ino_number, 0); sbinfo->free_inodes = sbinfo->max_inodes; spin_lock_init(&sbinfo->shrinklist_lock); INIT_LIST_HEAD(&sbinfo->shrinklist); -- 1.8.3

1 0

[PATCH 0/6] Support MPAM ACPI
by Wang ShaoBo 14 Apr '20

14 Apr '20

hulk inclusion category: feature bugzilla: 28055 CVE: NA ------------------------------ MPAM driver temporarily force initializing cache/memory unwillingly, Futher We should make it compatible with P2, P4, P6 machine in the future, it's eager to introduce new method to get MSCs' info from BIOS/DT. Note arm hasn't reached a final conclusion about MPAM ACPI Description, BIOS implemented one temporary version according to v1 spec. MPAM ACPI Table organized as follow: *******Address increased by raw******** [DIE0] Memory node: mc[proximity:0] [DIE1] Memory node: mc[proximity:1] [DIE0] Memory node: mc[proximity:0] [DIE2] Memory node: mc[proximity:2] [DIE3] Memory node: mc[proximity:3] [DIE0] Cache node: cache[PPTT_ref:$a] [PARTITION0] Cache node: cache[PPTT_ref:$a] [PARTITION1] Cache node: cache[PPTT_ref:$a] [PARTITION2] Cache node: cache[PPTT_ref:$a] [PARTITION3] Cache node: cache[PPTT_ref:$a] [PARTITION4] Cache node: cache[PPTT_ref:$a] [PARTITION5] Cache node: cache[PPTT_ref:$a] [PARTITION6] Cache node: cache[PPTT_ref:$a] [PARTITION7] Cache node: cache[PPTT_ref:$a] [DIE1] Cache node: cache[PPTT_ref:$b] [PARTITION0] Cache node: cache[PPTT_ref:$b] [PARTITION1] Cache node: cache[PPTT_ref:$b] ... We use PPTT_ref to decide which DIE the cache node belongs to, and use proximity to decide memory node. it is tricky, but still usefull. James Morse (3): ACPI / processor: Add helper to convert acpi_id to a phys_cpuid ACPI / PPTT: Add helper to validate cache nodes from an offset [dead] ACPI / PPTT: Filthy hack to find _a_ backwards reference in the PPTT [ROTTEN] Wang ShaoBo (3): ACPI / PPTT: cacheinfo: Label caches based on fw_token ACPI 6.x: Add definitions for MPAM table MPAM / ACPI: Refactoring MPAM init process and set MPAM ACPI as entrance arch/arm64/Kconfig | 2 + arch/arm64/include/asm/acpi.h | 4 + arch/arm64/include/asm/mpam_resource.h | 15 +- arch/arm64/include/asm/mpam_sched.h | 8 +- arch/arm64/kernel/mpam.c | 246 ++++++++++++++++++------ drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 1 + drivers/acpi/arm64/mpam.c | 249 +++++++++++++++++++++++++ drivers/acpi/pptt.c | 143 ++++++++++++++ drivers/acpi/processor_core.c | 16 ++ include/acpi/actbl2.h | 58 ++++++ include/acpi/processor.h | 1 + include/linux/acpi.h | 8 + 13 files changed, 698 insertions(+), 56 deletions(-) create mode 100644 drivers/acpi/arm64/mpam.c -- 2.20.1

1 6

关于nvme驱动可靠性优化合入open euler事宜
by Lengchao 13 Apr '20

13 Apr '20

背景说明： NVMe over fabric是存储协议应用的发展方向，业界存储主流厂商均已经发布支持的产品，在测试验证过程中发现一些可靠性问题：基于RHEL/CENT OS 8.0发现如下一些问题： 1、反复闪断端口，主机出现死锁，导致nvme controller卡住，无法恢复，需要重启才能恢复； 2、反复重启存储端服务，主机端crash； 3、通过命令行进行delete controller时导致crash（在nvme over roce连接已经断开时），进行reset controller时导致死锁，controller不能恢复需要重启才能恢复。（在nvme over roce连接已经断开时） 4、 Nvme对于错误码处理考虑不是很完善，在多个不同主机同时对一个存储大压力情况下，存储端需要回复类似busy错误码，在有多路径（DM-Multipath）的情况下会直接向上返回错误码，由于多条路径均返回错误码，导致业务中断或IO归零。 PS：多路径是存储应用必配的。 5、 Nvme 原生多路径对于路径识别采用的机制和传统的多路径软件识别路径方式不同，对于双活支持不友好。PS：双活是存储高可靠应用的典型应用场景。 PS：1、2、3中的问题有多个，其中已经确定部分问题开源社区最新版本已经解决，部分问题未解决，还有部分问题正在分析中； RHEL/CENT OS 8.0内核版本是4.18，open euler最新发布版本的内核版本是4.19，从初步的分析来看，以上问题在open euler均存在。诉求： 1、已经合入社区最新版本的问题，能够快速合入open euler下一个发布版本； 2、对于社区未解决的问题，能够快速推动合入社区，并合入open euler下一个发布版本； 3、针对上述第4、5项，nvme驱动如何优化，并推动合入社区； Open euler对nvme驱动可靠性优化合入的计划是什么样的，如何深度合作快速推动？非常感谢！

2 1

[summit]openEuler Virtual Summit 2020 will be held on Apr. 17th and 18th
by Fred Li 13 Apr '20

13 Apr '20

Hi all, I am exited to announce that openEuler Virtual Summit is coming! Due to COVID-19, we have to hold the first summit virtually, and I believe this is good to all the members' health. Please stay healthy and strong. Please visit https://openeuler.org/zh/summit/2020-virtual-summit.html (Chinese) or https://openeuler.org/en/summit/2020-virtual-summit.html (English) for details. As you can find on the page, there are several pases: 1. From now on to April 9th, it is call for speakers. To emphasize, this is only for Design summit, and please developers to start planning your design summit. 2. From Apr. 10th to 15th, it is open for registration. 3. The summit will be on Apr. 17th and 18th. There will be 2 parts. The first one is summit, and the second one is design summit. On Design summit, the contributors will have a virtual face to face meeting to discuss what we will develop for next release, which is openEuler 20.09 here. openEuler SIGs maintainers, please start to plan the design summit for your SIG with your team. Please note that you will have 2 hours for the meeting. Once confirmed, please send the following information to marketing(a)openeuler.org. Make sure you have subscribed [1]. - group name (SIG name): - chair: - BIO of the chair: - Brief introduction to the meeting: [1] https://mailweb.openeuler.org/postorius/lists/marketing@openeuler.org/ -- Regards Fred Li (李永乐)

7 10

openEuler峰会议题-RaspberryPi
by 方亚芬 11 Apr '20

11 Apr '20

老师，您好。以下是 RaspberryPi SIG 组参与的议题。烦请查收，谢谢。- 组名：树莓派 - 主持人：方亚芬 - 主持人简介：树莓派 SIG 组负责人 - 会议议程简介：本次会议主要介绍如下内容： 1、RaspberryPi SIG 组的背景介绍 2、RaspberryPi SIG 组的当前工作进展包括 openEuler 移植到树莓派的方法、当前存在问题及解决方案 3、后续发展规划 - group name (SIG name): RaspberryPi - chair: YaFen Fang - BIO of the chair: RaspberryPI SIG maintainer. - Brief introduction to the meeting: 1. Background of RaspberryPi SIG group. 2. Current progress of RaspberryPi SIG Include how to migrate openEuler to Raspberry Pi, and how to tackle current problems. 3. Future plan 祝工作顺利，生活愉快。 ------------------------------------------ 方亚芬中国科学院软件研究所智能软件研究中心邮箱：yafen(a)iscas.ac.cn 地址：北京市海淀区中关村南四街4号5楼

2 1

关于优化社区文档的阅读体验，欢迎您的反馈/Optimized the reading experience of document in the community document.Your feedback is welcome
by Junqi?Xie 10 Apr '20

10 Apr '20

关于优化社区文档的阅读体验，欢迎您的反馈： https://gitee.com/openeuler/website/issues/I1E208?from=project-issue issue内容如下：关于文档阅读体验，有如下issue反馈： 1、https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2、https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3、https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue 主要问题点在于： 1、目录结构不易展开 2、文档内容不连续，层级太多且无法顺畅翻页阅读。每次都需要在左侧导航切换希望提供pdf、single page、multi page不同阅读体验 sigle page：一个页面显示一个章节的所有内容，且能够提供页内的索引、目录或者浮动目录 multi page：一个页面内显示一个手册的所有内容。针对这些问题，请大家体验下mindspore资料阅读方式，如果大家认可该方式，openEuler社区文档就按照该框架优化资料阅读内容： https://www.mindspore.cn/tutorial/zh-CN/master/index.html 您是否认可mindspore的阅读体验？或者有更好的建议参考? 【English】 The following issues have been reported regarding document reading experience: 1.https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2.https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3.https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue The main problems are as follows: 1.The directory structure is difficult to expand. 2.The document content is not continuous. There are too many layers and pages cannot be turned smoothly. You need to switch between the navigation tree on the left each time. Different reading experience for PDF, single page, and multi page. sigle page: All contents of a chapter are displayed on a page. In addition, indexes, directories, or floating directories can be provided on the page. multi page: displays all contents of a manual on a page. To solve these problems, please experience the MindSpore documentation reading mode. If you agree with this mode or have made improvements based on this mode, the documentation of the OpenEuler community will be optimized based on this mode. **https://www.mindspore.cn/tutorial/zh-CN/master/index.html ** Do you recognize mindspore's reading experience? Or do you have any better suggestions?

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 08 Apr '20

08 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [简体中文](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction + https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM 兴趣小组 +[English](./sig-mpam.md) | 简体中文 + +MPAM(Memory Partitioning and Monitoring) 是鲲鹏920的新特性，用来控制 Cache, +内存带宽等资源的分配。混部业务场景下共享资源竞争可能会对业务性能造成很大干扰, +MPAM特性，针对LLC及访存带宽进行隔离和限制，可以减少业务间干扰，保障高优先级业务等。 + +## SIG组工作目标和范围 + +- 使能鲲鹏芯片的 MPAM 特性 +- 完善 MPAM 配套工具, 和文档 +- 推动和协助 MPAM 在实际场景中的应用和落地 +- 根据应用场景的诉求改进 MPAM +- 探索 MPAM 的新应用场景 +- 通过更多的应用和测试，推动MPAM驱动进入内核上游社区 + +### 该SIG管理的repository及描述 + +- 项目名称： + - mpam document：https://gitee.com/openeuler/mpam + - mpam 驱动在 kernel 仓库中：https://gitee.com/openeuler/kernel + - 将来会有 mpam 配套用户态工具 + +### 跨领域和面向外部的流程 + + 由该SIG定义和执行的，且跨领域和面向外部的流程和行动： + + - 非内部流程清单 + - 该SIG拥有的面向整个openEulerSIG的组织指导计划等 diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 06 Apr '20

06 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [��](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction +��https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM �� +[English](./sig-mpam.md) | �� + +MPAM(Memory Partitioning and Monitoring) ��920�� Cache, +��, +MPAM��LLC�� + +## SIG�� + +- �� MPAM �� +- �� MPAM ��, �� +- �� MPAM �� +- �� MPAM +- �� MPAM �� +- ��MPAM�� + +### ��SIG��repository�� + +- �� + - mpam document��https://gitee.com/openeuler/mpam + - mpam �� kernel ��https://gitee.com/openeuler/kernel + - �� mpam �� + +### �� + + ��SIG�� + + - �� + - ��SIG��openEulerSIG�� diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

2 1

回复:Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 31 Mar '20

31 Mar '20

Glad to. I will resend a V2. ---------- 该邮件从移动设备发送 --------------原始邮件-------------- 发件人："Xie XiuQi "<xiexiuqi(a)huawei.com>; 发送时间：2020年3月31日(星期二) 上午10:57 收件人："huangdaode" <huangdaode(a)huawei.com>;"Guohanjun (Hanjun Guo)" <guohanjun(a)huawei.com>;"Zhengyuan Liu" <liuzhengyuan(a)tj.kylinos.cn>;"kernel(a)openeuler.org" <kernel(a)openeuler.org>;"lipeng (Y)" <lipeng321(a)huawei.com>; 主题：Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error ----------------------------------- Hi Zhengyuan, Would you please resend a patch to remove those ccflags? Thanks! On 2020/3/31 9:34, huangdaode wrote: > Yes, I don't think we need these flags in open kernel tree, it's for product compile. > > -----邮件原件----- > 发件人: Xiexiuqi > 发送时间: 2020年3月27日 17:14 > 收件人: Guohanjun (Hanjun Guo) <guohanjun(a)huawei.com>; Zhengyuan Liu <liuzhengyuan(a)tj.kylinos.cn>; kernel(a)openeuler.org; huangdaode <huangdaode(a)huawei.com>; lipeng (Y) <lipeng321(a)huawei.com> > 主题: Re: [PATCH] KYLIN: hns3: fix a compilation error > > Hi Li Peng & Daode, > > Please help to check this patch about hns3's Makefile. > > On 2020/3/27 11:38, Hanjun Guo via Kernel wrote: >> On 2020/3/25 9:12, Zhengyuan Liu wrote: >>> >>> >>> On 2020/3/24 下午9:22, Hanjun Guo wrote: >>>> Hi Zhengyuan, >>>> >>>> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>>>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> >>>>> Make stack-protector-strong building flag depend on >>>>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a >>>>> copmilation error: >>>>> >>>>>     MODPOST 1532 modules >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>>>> >>>>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> --- >>>>>   drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>>>>   1 file changed, 2 insertions(+) >>>>> >>>>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> index 6653e81ede9a..f4952f46be7f 100644 >>>>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> @@ -4,7 +4,9 @@ >>>>>   # >>>>>     # Add security options >>>>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>>>>   ccflags-y += -fstack-protector-strong >>>> >>>> I'm not sure why we need this compile option, seems we need to >>>> remove all those ccflags-y in this file, I will take a look and get >>>> back to you. >>> >>> Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. >> >> I think we need to remove those ccflags, could you please send another >> version of the patch? > > Hi, Hanjun, > I agree with you, we do not need this ccflags in kernel tree. > What do you think, Li Peng & Daode? > > @Li Peng, @Huang Daode. > >> >> Thanks >> Hanjun >> _______________________________________________ >> Kernel mailing list -- kernel(a)openeuler.org To unsubscribe send an >> email to kernel-leave(a)openeuler.org >> >

1 0

Re: [PATCH] KYLIN: hns3: fix a compilation error
by Hanjun Guo 31 Mar '20

31 Mar '20

On 2020/3/25 9:12, Zhengyuan Liu wrote: > > > On 2020/3/24 下午9:22, Hanjun Guo wrote: >> Hi Zhengyuan, >> >> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> >>> Make stack-protector-strong building flag depend on >>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could >>> be a copmilation error: >>> >>> MODPOST 1532 modules >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>> >>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> --- >>> drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> index 6653e81ede9a..f4952f46be7f 100644 >>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> @@ -4,7 +4,9 @@ >>> # >>> # Add security options >>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>> ccflags-y += -fstack-protector-strong >> >> I'm not sure why we need this compile option, seems we need to remove >> all those ccflags-y in this file, I will take a look and get back to >> you. > > Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. I think we need to remove those ccflags, could you please send another version of the patch? Thanks Hanjun

3 3

Re: [Tc] SIG组工作审视
by Fred Li 27 Mar '20

27 Mar '20

Happy to see technical committee members will mentor us. Many thanks in advance. On Fri, Mar 27, 2020 at 7:54 PM myeuler <myeuler(a)163.com> wrote: > > Hi, All tc members, Please do the SIG work review according to this list: > 1. xinwei hu : Virt, system-tool, storage, sig-kernel, sig-community > 2. hong xie : sig-bounds_checking_function, sig-ai-bigdata, security-committee, Runtime, Programming-language > 3. hanjun guo : Private, Packaging, oVirt, Others, Networking, > 4. xiuqi Xie : Kernel, kae, iSulad, Infrastructure, doc > 5. hailiang Zhang : Desktop, DB, Container, Computing > 6. Xun Wang : Compiler, Base-service, A-Tune, atune > 7 Wei Xiong : dev-util, Application, sig-template, sig-mate-desktop > > 请各位委员按照上述的分组对SIG组进行审视，审视的内容包含： > 1. SIG组是否正常运作。是否有明确的负责人。 > 2. 相关的项目是否已经有输出，相关软件是否已经进入gitee仓。 > 3. 相关SIG的主页面是否有明确的介绍信息和完善的说明。 > > 下次TC meeting我们审视一下这些SIG的运作，一些SIG是否需要保留或者合并请各位委员给出建议和意见。 > > 谢谢。 > > > > > _______________________________________________ > Tc mailing list -- tc(a)openeuler.org > To unsubscribe send an email to tc-leave(a)openeuler.org -- Regards Fred Li (李永乐)

1 0

re: How to get guaranteed TF for openeuler.org ?
by ETTA 27 Mar '20

27 Mar '20

Here is how, Guranteed TF above 20 or 30 http://www.str8-creative.io/product/trust-flow-seo-package/ That equals immediate higher rankings TF report attached Regards ETTA Unsubscribe option is available on the footer of our website

1 0

[PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 25 Mar '20

25 Mar '20

From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> Make stack-protector-strong building flag depend on CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a copmilation error: MODPOST 1532 modules ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81ede9a..f4952f46be7f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -4,7 +4,9 @@ # # Add security options +ifdef CONFIG_STACKPROTECTOR_STRONG ccflags-y += -fstack-protector-strong +endif ccflags-y += -Wl,-z,relro,-z,now ccflags-y += -Wl,-z,noexecstack ccflags-y += -D_FORTIFY_SOURCE=2 -O2 -- 2.20.1

2 2

[PATCH 0/2] livepatch/core: support jump_label
by Cheng Jian 24 Mar '20

24 Mar '20

livepatch/core: support jump_label Cheng Jian (2): livepatch/core: support jump_label livepatch/core: fix kabi for klp_rel_state include/linux/jump_label.h | 1 + include/linux/module.h | 43 +++++++++++++++++++++++++++++++++++++++++++ kernel/jump_label.c | 16 ++++++++++++++++ kernel/livepatch/core.c | 7 +++++++ kernel/module.c | 5 ++++- 5 files changed, 71 insertions(+), 1 deletion(-) -- 2.7.4

1 2

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:56, haoxin wrote: > 非常感谢您的回复，谢谢，我还想问下，intel rdt resctrl挂载后下有很多配置文件，例如mon_data下的llc_occupancy、mbm_local_bytes、mbm_total_bytes等，这些是在后续会实现还是不再提供类似文件？ > 近期暂时还没有改动，后续支持鲲鹏930的版本可以考虑。当前如果有场景确实需要，以及有效果的话，也可以考虑提供。 > > > > > > 在 2020-03-23 09:38:58，"Xie XiuQi via Kernel" <kernel(a)openeuler.org> 写道： >> >> >>On 2020/3/23 9:15, haoxin wrote: >>> 您好： >>> 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？ >> >>有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 >> >>----- >>1 背景 >>MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. >>Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, >>我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。 >>社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). >> >>2 Quick Start >>Hi620 2P 为例, 其基本情况: >> >>2.1 linux kernel 使能 mpam 特性 >>openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. >>openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. >> >>2.2 挂载 resctrl >>系统启动后, 需要手动 mount resctrl 才能使用. >> >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >>2.3 配置和使用资源组 >>2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way >># 每个目录表示对于的 L3T >>cd /sys/fs/resctrl >> >># 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way >># 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) >>mkdir p1 >>cd p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >># 更多的例子 >># partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) >># mask 16进制 >>mkdir p2 >>cd p2 >>echo "L3:0=30;1=f0;2=30;3=f0" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >>Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； >> >>2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况 >>由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. >> >># p1 分组已存在, 开启 monitor >>echo 1 > /sys/fs/resctrl/p1/ctrlmon >># 观察该组资源的使用情况 >># L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; >># Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) >>grep . /sys/fs/resctrl/p1/mon_data/* >> >>2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) >># task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 task 19 move 到 p1 资源组中 >># 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 >># move 进程时, 已创建的子进程不影响 >>echo 19 > /sys/fs/resctrl/p1/tasks >> >># 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) >>echo $$ > /sys/fs/resctrl/p1/tasks >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p1/tasks >> >>2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) >>即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) >> >># task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 cpu 1 move 到 p2 资源组中 >>echo 1 > /sys/fs/resctrl/p2/cpus_list >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 >>cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 >> >>2.4 内存带宽资源划分 >> >>2.4.1 为 PART 1 设置内存带宽的上限 >># PART 1, 最多使用约 50% 的带宽; >># 0,1,2,3 分别表示 4 个 numa node >># 带宽按照百分比进行设置, 最小粒度是 5% 对齐. >> >>echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata >> >>2.4.3 分配进程(pid)到资源分组 >>挂载 resctrl >>cache 资源划分 >>设置 monitor >>起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) >># 挂载 mpamctrl >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) >># partid=1, mask=f >>mkdir p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >> >># 使用 monitor 1 来监控 part 1 的 cache 使用情况 >># monitor=1, pmg=1, partid=1 >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > p1/tasks >> >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & >> >># lat_mem_rd 测试完成后查看结果. >>如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: >> >>echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata >>测试过程中如果想观察 Cache 的使用情况 >> >>grep . /sys/fs/resctrl/p1/mon_data/L3* >> >>3.2 限制内存带宽的例子 >>步骤: >> >>挂载 resctrl >>限制资源划分 >>设置 monitor >>起测试程序 >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 0/100 表示不限制 >># 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). >>mkdir p1 >>echo "MB:0=30;1=30;2=30;3=30" > p1/schemata >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > /sys/fs/resctrl/p1/tasks >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & >> >># 观察monitor情况 >>cd /sys/fs/resctrl >># monitor=1 >>grep . /sys/fs/resctrl/p1/mon_data/MB* >> >> >>> >>> 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ >>> >>> 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 >>> >>> “num_rmids”: >>> The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. >>> “mon_features”: >>> Lists the monitoring events if monitoring is enabled for the resource. >>> “max_threshold_occupancy”: >>> Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. >>> >>> >>> >>> >>> >>_______________________________________________ >>Kernel mailing list -- kernel(a)openeuler.org >>To unsubscribe send an email to kernel-leave(a)openeuler.org > > > > >

1 0

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:15, haoxin wrote: > 您好： > 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 ----- 1 背景 MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, 我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). 2 Quick Start Hi620 2P 为例, 其基本情况: 2.1 linux kernel 使能 mpam 特性 openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. 2.2 挂载 resctrl 系统启动后, 需要手动 mount resctrl 才能使用. mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl 2.3 配置和使用资源组 2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way # 每个目录表示对于的 L3T cd /sys/fs/resctrl # 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way # 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) mkdir p1 cd p1 echo "L3:0=f;1=f;2=f;3=f" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 # 更多的例子 # partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) # mask 16进制 mkdir p2 cd p2 echo "L3:0=30;1=f0;2=30;3=f0" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； 2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. # p1 分组已存在, 开启 monitor echo 1 > /sys/fs/resctrl/p1/ctrlmon # 观察该组资源的使用情况 # L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; # Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) grep . /sys/fs/resctrl/p1/mon_data/* 2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) # task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 task 19 move 到 p1 资源组中 # 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 # move 进程时, 已创建的子进程不影响 echo 19 > /sys/fs/resctrl/p1/tasks # 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) echo $$ > /sys/fs/resctrl/p1/tasks # 查看 task 的设置情况 cat /sys/fs/resctrl/p1/tasks 2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) 即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) # task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 cpu 1 move 到 p2 资源组中 echo 1 > /sys/fs/resctrl/p2/cpus_list # 查看 task 的设置情况 cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 2.4 内存带宽资源划分 2.4.1 为 PART 1 设置内存带宽的上限 # PART 1, 最多使用约 50% 的带宽; # 0,1,2,3 分别表示 4 个 numa node # 带宽按照百分比进行设置, 最小粒度是 5% 对齐. echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata 2.4.3 分配进程(pid)到资源分组挂载 resctrl cache 资源划分设置 monitor 起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) # 挂载 mpamctrl mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) # partid=1, mask=f mkdir p1 echo "L3:0=f;1=f;2=f;3=f" > schemata # 使用 monitor 1 来监控 part 1 的 cache 使用情况 # monitor=1, pmg=1, partid=1 echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & # lat_mem_rd 测试完成后查看结果. 如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata 测试过程中如果想观察 Cache 的使用情况 grep . /sys/fs/resctrl/p1/mon_data/L3* 3.2 限制内存带宽的例子步骤: 挂载 resctrl 限制资源划分设置 monitor 起测试程序 mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 0/100 表示不限制 # 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). mkdir p1 echo "MB:0=30;1=30;2=30;3=30" > p1/schemata echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > /sys/fs/resctrl/p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & # 观察monitor情况 cd /sys/fs/resctrl # monitor=1 grep . /sys/fs/resctrl/p1/mon_data/MB* > > 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ > > 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 > > “num_rmids”: > The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. > “mon_features”: > Lists the monitoring events if monitoring is enabled for the resource. > “max_threshold_occupancy”: > Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. > > > > >

1 0

[PATCH 0/2] update openeuler_defconfig
by Yang Yingliang 21 Mar '20

21 Mar '20

Xie XiuQi (1): x86/config: enable CONFIG_CFQ_GROUP_IOSCHED Xiongfeng Wang (1): x86/openeuler_config: disable CONFIG_EFI_VARS arch/x86/configs/openeuler_defconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) -- 1.8.3

1 2

[PATCH] btrfs: don't use WARN_ON when ret is -ENOTENT in __btrfs_free_extent()
by Yang Yingliang 20 Mar '20

20 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19039 ------------------------------------------------- Avoid register messages when ret is -ENOTENT. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 47ca1eb..4bf9318 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6793,7 +6793,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, } extent_slot = path->slots[0]; } - } else if (WARN_ON(ret == -ENOENT)) { + } else if (ret == -ENOENT) { btrfs_print_leaf(path->nodes[0]); btrfs_err(info, "unable to find ref byte nr %llu parent %llu root %llu owner %llu offset %llu", -- 1.8.3

1 0

[PATCH v2] cifs: fix panic in smb2_reconnect
by Yang Yingliang 20 Mar '20

20 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-5.2-rc6 commit 0ff2b018b02f category: bugfix bugzilla: 16811 CVE: NA https://gitee.com/src-openeuler/cifs-utils/issues/I1C1QY?from=project-issue ------------------------------------------------- RH Bugzilla: 1702264 We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Conflicts: fs/cifs/cifsproto.h fs/cifs/connect.c [yyl: make cifs_put_smb_ses() extern] --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 975f800..f031420 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2733,8 +2733,7 @@ static int match_session(struct cifs_ses *ses, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 99efb2b..76dfb4f 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2920,9 +2920,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2941,7 +2946,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3

1 0

[PATCH] fs/cifs: cifs fix panic in smb2_reconnect
by linfeilong 19 Mar '20

19 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-v5.1-rc1 commit 0ff2b018b02f89da26a616e0148582321a00fd99 category: bugfix bugzilla: 1702264 CVE: NA ------------------------------------------------- We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. [ 397.787693] CIFS VFS: cifs_mount failed w/return code = -2 [ 403.671998] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 403.672065] PGD 0 P4D 0 [ 403.672087] Oops: 0000 [#1] SMP PTI [ 403.672114] CPU: 3 PID: 47 Comm: kworker/3:1 Kdump: loaded Not tainted 4.19.90-2003.1.1.0033.oe1.x86_64 #1 [ 403.672173] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 403.673038] Workqueue: cifsiod smb2_reconnect_server [cifs] [ 403.673746] RIP: 0010:__list_del_entry_valid+0x25/0x90 [ 403.674448] Code: c3 0f 1f 40 00 48 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 39 c8 74 26 48 b9 00 02 00 00 00 00 ad de 48 39 ca 74 2e <48> 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 [ 403.675955] RSP: 0018:ffffbd48007c3e18 EFLAGS: 00010207 [ 403.676696] RAX: 0000000000000000 RBX: ffffbd48007c3e50 RCX: dead000000000200 [ 403.677447] RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff9bee27f65818 [ 403.678214] RBP: ffffbd48007c3e38 R08: ffff9bee3bba3038 R09: 00000000000002c2 [ 403.679001] R10: ffffbd48006a3d90 R11: 0000000000000000 R12: ffff9bee27f66818 [ 403.679811] R13: 0000000000000001 R14: ffff9bee27f65800 R15: ffff9bee27f65818 [ 403.680639] FS: 0000000000000000(0000) GS:ffff9bee3bb80000(0000) knlGS:0000000000000000 [ 403.681505] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 403.682391] CR2: 0000000000000000 CR3: 000000003040a005 CR4: 00000000003606e0 [ 403.683315] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 403.684247] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 403.685181] Call Trace: [ 403.686141] smb2_reconnect_server+0x17a/0x340 [cifs] [ 403.687118] process_one_work+0x195/0x3d0 [ 403.688102] worker_thread+0x30/0x390 [ 403.689096] ? process_one_work+0x3d0/0x3d0 [ 403.690111] kthread+0x113/0x130 [ 403.691132] ? kthread_create_worker_on_cpu+0x70/0x70 [ 403.692181] ret_from_fork+0x35/0x40 Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Feilong Lin <linfeilong(a)huawei.com> --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7e85070..2e46a8a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2732,8 +2732,7 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 30417d4..97995b2 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2914,9 +2914,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2935,7 +2940,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3.1

1 0

[PATCH 1/2] xfs: always init fdblocks in mount
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Zheng Bin <zhengbin13(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31088 CVE: NA --------------------------- Use fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 0, counted 3224 in ag 0 sb_fdblocks 3228, counted 3224 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, while in linux-next, sync not stuck. The reason is same to commit d0c7feaf8767 ("xfs: add agf freeblocks verify in xfs_agf_verify"), cause agf_longest is 0, we can not block this in xfs_agf_verify. Make sure fdblocks is always inited in mount(also init ifree, icount). xfs_mountfs xfs_check_summary_counts xfs_initialize_perag_data Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_ag_resv.c | 11 +++++++---- fs/xfs/xfs_mount.c | 33 --------------------------------- 2 files changed, 7 insertions(+), 37 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index e2ba2a3..4f099fc 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -309,10 +309,13 @@ } #ifdef DEBUG - /* need to read in the AGF for the ASSERT below to work */ - error = xfs_alloc_pagf_init(pag->pag_mount, tp, pag->pag_agno, 0); - if (error) - return error; + if (!pag->pagf_init) { + /* need to read in the AGF for the ASSERT below to work */ + error = xfs_alloc_pagf_init(pag->pag_mount, tp, + pag->pag_agno, 0); + if (error) + return error; + } ASSERT(xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 02d1509..3af91e2 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -624,39 +624,6 @@ return -EFSCORRUPTED; } - /* - * Now the log is mounted, we know if it was an unclean shutdown or - * not. If it was, with the first phase of recovery has completed, we - * have consistent AG blocks on disk. We have not recovered EFIs yet, - * but they are recovered transactionally in the second recovery phase - * later. - * - * If the log was clean when we mounted, we can check the summary - * counters. If any of them are obviously incorrect, we can recompute - * them from the AGF headers in the next step. - */ - if (XFS_LAST_UNMOUNT_WAS_CLEAN(mp) && - (mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks || - !xfs_verify_icount(mp, mp->m_sb.sb_icount) || - mp->m_sb.sb_ifree > mp->m_sb.sb_icount)) - mp->m_flags |= XFS_MOUNT_BAD_SUMMARY; - - /* - * We can safely re-initialise incore superblock counters from the - * per-ag data. These may not be correct if the filesystem was not - * cleanly unmounted, so we waited for recovery to finish before doing - * this. - * - * If the filesystem was cleanly unmounted or the previous check did - * not flag anything weird, then we can trust the values in the - * superblock to be correct and we don't need to do anything here. - * Otherwise, recalculate the summary counters. - */ - if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || - XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && - !(mp->m_flags & XFS_MOUNT_BAD_SUMMARY)) - return 0; - return xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount); } -- 1.8.3

1 1

[PATCH] xfs: devirtualize ->sf_entsize and ->sf_nextentry
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-5.5-rc1 commit 50f6bb6b7aea8177110e55355c455f18912a7a73 category: bugfix bugzilla: 31596 CVE: NA --------------------------- Just check for file-type enabled directories directly. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Conflicts: fs/xfs/libxfs/xfs_dir2_priv.h fs/xfs/libxfs/xfs_dir2_sf.c fs/xfs/xfs_dir2_readdir.c [zb: since patch 84915e1bdddf, 707e0ddaf67e, e91ec882af21, 04df34ac6494 not merged, adjust code] Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_da_format.c | 48 --------------------- fs/xfs/libxfs/xfs_dir2.h | 4 -- fs/xfs/libxfs/xfs_dir2_block.c | 2 +- fs/xfs/libxfs/xfs_dir2_priv.h | 2 + fs/xfs/libxfs/xfs_dir2_sf.c | 96 +++++++++++++++++++++++++----------------- fs/xfs/xfs_dir2_readdir.c | 7 +-- 6 files changed, 64 insertions(+), 95 deletions(-) diff --git a/fs/xfs/libxfs/xfs_da_format.c b/fs/xfs/libxfs/xfs_da_format.c index b39053d..39c2610 100644 --- a/fs/xfs/libxfs/xfs_da_format.c +++ b/fs/xfs/libxfs/xfs_da_format.c @@ -18,48 +18,6 @@ #include "xfs_dir2_priv.h" /* - * Shortform directory ops - */ -static int -xfs_dir2_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - int count = sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ - - count += len; /* name */ - count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ - return count; -} - -static int -xfs_dir3_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - return xfs_dir2_sf_entsize(hdr, len) + sizeof(uint8_t); -} - -static struct xfs_dir2_sf_entry * -xfs_dir2_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir2_sf_entsize(hdr, sfep->namelen)); -} - -static struct xfs_dir2_sf_entry * -xfs_dir3_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir3_sf_entsize(hdr, sfep->namelen)); -} - - -/* * For filetype enabled shortform directories, the file type field is stored at * the end of the name. Because it's only a single byte, endian conversion is * not necessary. For non-filetype enable directories, the type is always @@ -692,8 +650,6 @@ } static const struct xfs_dir_ops xfs_dir2_ops = { - .sf_entsize = xfs_dir2_sf_entsize, - .sf_nextentry = xfs_dir2_sf_nextentry, .sf_get_ftype = xfs_dir2_sfe_get_ftype, .sf_put_ftype = xfs_dir2_sfe_put_ftype, .sf_get_ino = xfs_dir2_sfe_get_ino, @@ -742,8 +698,6 @@ }; static const struct xfs_dir_ops xfs_dir2_ftype_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, @@ -792,8 +746,6 @@ }; static const struct xfs_dir_ops xfs_dir3_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index c3e3f6b..155bae5 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -30,10 +30,6 @@ * directory operations vector for encode/decode routines */ struct xfs_dir_ops { - int (*sf_entsize)(struct xfs_dir2_sf_hdr *hdr, int len); - struct xfs_dir2_sf_entry * - (*sf_nextentry)(struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep); uint8_t (*sf_get_ftype)(struct xfs_dir2_sf_entry *sfep); void (*sf_put_ftype)(struct xfs_dir2_sf_entry *sfep, uint8_t ftype); diff --git a/fs/xfs/libxfs/xfs_dir2_block.c b/fs/xfs/libxfs/xfs_dir2_block.c index 30ed591..fdcf6aa 100644 --- a/fs/xfs/libxfs/xfs_dir2_block.c +++ b/fs/xfs/libxfs/xfs_dir2_block.c @@ -1235,7 +1235,7 @@ static int xfs_dir2_block_lookup_int(xfs_da_args_t *args, struct xfs_buf **bpp, if (++i == sfp->count) sfep = NULL; else - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* Done with the temporary buffer */ kmem_free(sfp); diff --git a/fs/xfs/libxfs/xfs_dir2_priv.h b/fs/xfs/libxfs/xfs_dir2_priv.h index 59f9fb2..655fb33 100644 --- a/fs/xfs/libxfs/xfs_dir2_priv.h +++ b/fs/xfs/libxfs/xfs_dir2_priv.h @@ -108,6 +108,8 @@ extern int xfs_dir2_free_read(struct xfs_trans *tp, struct xfs_inode *dp, xfs_dablk_t fbno, struct xfs_buf **bpp); /* xfs_dir2_sf.c */ +struct xfs_dir2_sf_entry *xfs_dir2_sf_nextentry(struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, struct xfs_dir2_sf_entry *sfep); extern int xfs_dir2_block_sfsize(struct xfs_inode *dp, struct xfs_dir2_data_hdr *block, struct xfs_dir2_sf_hdr *sfhp); extern int xfs_dir2_block_to_sf(struct xfs_da_args *args, struct xfs_buf *bp, diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index 585dfdb..716c8c5 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -40,6 +40,31 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, static void xfs_dir2_sf_toino4(xfs_da_args_t *args); static void xfs_dir2_sf_toino8(xfs_da_args_t *args); +static int +xfs_dir2_sf_entsize( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + int len) +{ + int count = len; + + count += sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ + count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ + + if (xfs_sb_version_hasftype(&mp->m_sb)) + count += sizeof(uint8_t); + return count; +} + +struct xfs_dir2_sf_entry * +xfs_dir2_sf_nextentry( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + struct xfs_dir2_sf_entry *sfep) +{ + return (void *)sfep + xfs_dir2_sf_entsize(mp, hdr, sfep->namelen); +} + /* * Given a block directory (dp/block), calculate its size as a shortform (sf) * directory and a header for the sf directory, if it will fit it the @@ -222,7 +247,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, dp->d_ops->sf_put_ftype(sfep, dp->d_ops->data_get_ftype(dep)); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ptr += dp->d_ops->data_entsize(dep->namelen); } @@ -294,7 +319,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Compute entry (and change in) size. */ - incr_isize = dp->d_ops->sf_entsize(sfp, args->namelen); + incr_isize = xfs_dir2_sf_entsize(dp->i_mount, sfp, args->namelen); objchange = 0; /* @@ -367,18 +392,17 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_data_aoff_t offset, /* offset to use for new ent */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* byte offset in sf dir */ - xfs_inode_t *dp; /* incore directory inode */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; byteoff = (int)((char *)sfep - (char *)sfp); /* * Grow the in-inode space. */ - xfs_idata_realloc(dp, dp->d_ops->sf_entsize(sfp, args->namelen), + xfs_idata_realloc(dp, xfs_dir2_sf_entsize(mp, sfp, args->namelen), XFS_DATA_FORK); /* * Need to set up again due to realloc of the inode data. @@ -419,9 +443,10 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int objchange, /* changing inode number size */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int add_datasize; /* data size need for new ent */ char *buf; /* buffer for old */ - xfs_inode_t *dp; /* incore directory inode */ int eof; /* reached end of old dir */ int nbytes; /* temp for byte copies */ xfs_dir2_data_aoff_t new_offset; /* next offset value */ @@ -435,8 +460,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Copy the old directory to the stack buffer. */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; old_isize = (int)dp->i_d.di_size; buf = kmem_alloc(old_isize, KM_SLEEP); @@ -453,7 +476,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, eof = (char *)oldsfep == &buf[old_isize]; !eof; offset = new_offset + dp->d_ops->data_entsize(oldsfep->namelen), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep), eof = (char *)oldsfep == &buf[old_isize]) { new_offset = xfs_dir2_sf_get_offset(oldsfep); if (offset + add_datasize <= new_offset) @@ -491,7 +514,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * If there's more left to copy, do that. */ if (!eof) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); memcpy(sfep, oldsfep, old_isize - nbytes); } kmem_free(buf); @@ -513,7 +536,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_entry_t **sfepp, /* out(1): new entry ptr */ xfs_dir2_data_aoff_t *offsetp) /* out(1): new offset */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int holefit; /* found hole it will fit in */ int i; /* entry number */ xfs_dir2_data_aoff_t offset; /* data block offset */ @@ -522,8 +546,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int size; /* entry's data size */ int used; /* data bytes used */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; size = dp->d_ops->data_entsize(args->namelen); offset = dp->d_ops->data_first_offset; @@ -539,7 +561,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, holefit = offset + size <= xfs_dir2_sf_get_offset(sfep); offset = xfs_dir2_sf_get_offset(sfep) + dp->d_ops->data_entsize(sfep->namelen); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* * Calculate data bytes used excluding the new entry, if this @@ -598,7 +620,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(dp->i_mount, sfp, sfep)) { ASSERT(xfs_dir2_sf_get_offset(sfep) >= offset); ino = dp->d_ops->sf_get_ino(sfp, sfep); i8count += ino > XFS_DIR2_MAX_SHORT_INUM; @@ -683,7 +705,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * within the data buffer. The next entry starts after the * name component, so nextentry is an acceptable test. */ - next_sfep = dops->sf_nextentry(sfp, sfep); + next_sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); if (endp < (char *)next_sfep) return __this_address; @@ -782,7 +804,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_lookup( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ int error; xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ @@ -793,7 +816,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_lookup(args); xfs_dir2_sf_check(args); - dp = args->dp; ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* @@ -831,7 +853,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ ci_sfep = NULL; for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { /* * Compare name and if it's an exact match, return the inode * number. If it's the first case-insensitive match, store the @@ -867,8 +889,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_removename( xfs_da_args_t *args) { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* offset of removed entry */ - xfs_inode_t *dp; /* incore directory inode */ int entsize; /* this entry's size */ int i; /* shortform entry index */ int newsize; /* new inode size */ @@ -878,8 +901,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_removename(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); oldsize = (int)dp->i_d.di_size; /* @@ -898,7 +919,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Find the one we're deleting. */ for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ASSERT(dp->d_ops->sf_get_ino(sfp, sfep) == @@ -915,7 +936,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Calculate sizes. */ byteoff = (int)((char *)sfep - (char *)sfp); - entsize = dp->d_ops->sf_entsize(sfp, args->namelen); + entsize = xfs_dir2_sf_entsize(mp, sfp, args->namelen); newsize = oldsize - entsize; /* * Copy the part if any after the removed entry, sliding it down. @@ -954,7 +975,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_replace( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ xfs_ino_t ino=0; /* entry old inode number */ int i8elevated; /* sf_toino8 set i8count=1 */ @@ -963,8 +985,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_replace(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* * Bail out if the shortform directory is way too small. @@ -1020,7 +1040,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ else { for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ino = dp->d_ops->sf_get_ino(sfp, sfep); @@ -1079,8 +1099,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino4( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1091,8 +1112,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino4(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1126,8 +1145,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); @@ -1152,8 +1171,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino8( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1164,8 +1184,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino8(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1199,8 +1217,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); diff --git a/fs/xfs/xfs_dir2_readdir.c b/fs/xfs/xfs_dir2_readdir.c index 5142e64..2ae98c2 100644 --- a/fs/xfs/xfs_dir2_readdir.c +++ b/fs/xfs/xfs_dir2_readdir.c @@ -50,6 +50,7 @@ { int i; /* shortform entry number */ struct xfs_inode *dp = args->dp; /* incore directory inode */ + struct xfs_mount *mp = dp->i_mount; xfs_dir2_dataptr_t off; /* current entry's offset */ xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ @@ -111,7 +112,7 @@ xfs_dir2_sf_get_offset(sfep)); if (ctx->pos > off) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); continue; } @@ -119,9 +120,9 @@ filetype = dp->d_ops->sf_get_ftype(sfep); ctx->pos = off & 0x7fffffff; if (!dir_emit(ctx, (char *)sfep->name, sfep->namelen, ino, - xfs_dir3_get_dtype(dp->i_mount, filetype))) + xfs_dir3_get_dtype(mp, filetype))) return 0; - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ctx->pos = xfs_dir2_db_off_to_dataptr(geo, geo->datablk + 1, 0) & -- 1.8.3

1 0

[PATCH 1/2] block: delete part_round_stats and switch to less precise counting
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Mikulas Patocka <mpatocka(a)redhat.com> mainline inclusion from mainline-5.0-rc1 commit 5b18b5a737600fd20ba2045f320d5926ebbf341a category: bugfix bugzilla: 31388 CVE: NA --------------------------- We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflict: block/bio.c block/blk-core.c block/blk-merge.c block/genhd.c include/linux/genhd.h Signed-off-by: Yufen Yu <yuyufen(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/bio.c | 23 ++++++++++++++++++++--- block/blk-core.c | 6 ++++-- block/blk-merge.c | 1 - block/genhd.c | 4 ---- block/partition-generic.c | 4 ---- include/linux/genhd.h | 1 + 6 files changed, 25 insertions(+), 14 deletions(-) diff --git a/block/bio.c b/block/bio.c index 3d7570553..48a8cf5 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1668,13 +1668,28 @@ void bio_check_pages_dirty(struct bio *bio) } EXPORT_SYMBOL_GPL(bio_check_pages_dirty); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now) +{ + unsigned long stamp; +again: + stamp = READ_ONCE(part->stamp); + if (unlikely(stamp != now)) { + if (likely(cmpxchg(&part->stamp, stamp, now) == stamp)) + __part_stat_add(cpu, part, io_ticks, 1); + } + if (part->partno) { + part = &part_to_disk(part)->part0; + goto again; + } +} + void generic_start_io_acct(struct request_queue *q, int op, unsigned long sectors, struct hd_struct *part) { const int sgrp = op_stat_group(op); int cpu = part_stat_lock(); - part_round_stats(q, cpu, part); + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, sectors[sgrp], sectors); part_inc_in_flight(q, part, op_is_write(op)); @@ -1686,12 +1701,14 @@ void generic_start_io_acct(struct request_queue *q, int op, void generic_end_io_acct(struct request_queue *q, int req_op, struct hd_struct *part, unsigned long start_time) { - unsigned long duration = jiffies - start_time; + unsigned long now = jiffies; + unsigned long duration = now - start_time; const int sgrp = op_stat_group(req_op); int cpu = part_stat_lock(); + update_io_ticks(cpu, part, now); part_stat_add(cpu, part, nsecs[sgrp], jiffies_to_nsecs(duration)); - part_round_stats(q, cpu, part); + part_stat_add(cpu, part, time_in_queue, duration); part_dec_in_flight(q, part, op_is_write(req_op)); part_stat_unlock(); diff --git a/block/blk-core.c b/block/blk-core.c index b64dec2..d9e3ee6 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2740,9 +2740,10 @@ void blk_account_io_done(struct request *req, u64 now) cpu = part_stat_lock(); part = req->part; + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, nsecs[sgrp], now - req->start_time_ns); - part_round_stats(req->q, cpu, part); + part_stat_add(cpu, part, time_in_queue, nsecs_to_jiffies64(now - req->start_time_ns)); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); @@ -2790,11 +2791,12 @@ void blk_account_io_start(struct request *rq, bool new_io) part_stat_inc(cpu, part, merges[rw]); } else { part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq)); - part_round_stats(rq->q, cpu, part); part_inc_in_flight(rq->q, part, rw); rq->part = part; } + update_io_ticks(cpu, part, jiffies); + part_stat_unlock(); } diff --git a/block/blk-merge.c b/block/blk-merge.c index 7efa8c3..044bff9 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -656,7 +656,6 @@ static void blk_account_io_merge(struct request *req) cpu = part_stat_lock(); part = req->part; - part_round_stats(req->q, cpu, part); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); diff --git a/block/genhd.c b/block/genhd.c index ff9d46d..862a2f3 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1342,7 +1342,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) struct hd_struct *hd; char buf[BDEVNAME_SIZE]; unsigned int inflight[2]; - int cpu; /* if (&disk_to_dev(gp)->kobj.entry == block_class.devices.next) @@ -1354,9 +1353,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { - cpu = part_stat_lock(); - part_round_stats(gp->queue, cpu, hd); - part_stat_unlock(); part_in_flight(gp->queue, hd, inflight); seq_printf(seqf, "%4d %7d %s " "%lu %lu %lu %u " diff --git a/block/partition-generic.c b/block/partition-generic.c index 8ad6dca..d86d794 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -121,11 +121,7 @@ ssize_t part_stat_show(struct device *dev, struct hd_struct *p = dev_to_part(dev); struct request_queue *q = part_to_disk(p)->queue; unsigned int inflight[2]; - int cpu; - cpu = part_stat_lock(); - part_round_stats(q, cpu, p); - part_stat_unlock(); part_in_flight(q, p, inflight); return sprintf(buf, "%8lu %8lu %8llu %8u " diff --git a/include/linux/genhd.h b/include/linux/genhd.h index df0d01d..666b23a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -422,6 +422,7 @@ static inline void free_part_info(struct hd_struct *part) /* block/blk-core.c */ extern void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now); /* block/genhd.c */ extern void device_add_disk(struct device *parent, struct gendisk *disk); -- 1.8.3

1 1

[PATCH] CIFS: Fix bug which the return value by asynchronous read is error
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Yilu Lin <linyilu(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31384 CVE: NA ------------------------------------------------- This patch is used to fix the bug in collect_uncached_read_data() that rc is automatically converted from a signed number to an unsigned number when the CIFS asynchronous read fails. It will cause ctx->rc is error. Example: Share a directory and create a file on the Windows OS. Mount the directory to the Linux OS using CIFS. On the CIFS client of the Linux OS, invoke the pread interface to deliver the read request. The size of the read length plus offset of the read request is greater than the maximum file size. In this case, the CIFS server on the Windows OS returns a failure message (for example, the return value of smb2.nt_status is STATUS_INVALID_PARAMETER). After receiving the response message, the CIFS client parses smb2.nt_status to STATUS_INVALID_PARAMETER and converts it to the Linux error code (rdata->result=-22). Then the CIFS client invokes the collect_uncached_read_data function to assign the value of rdata->result to rc, that is, rc=rdata->result=-22. The type of the ctx->total_len variable is unsigned integer, the type of the rc variable is integer, and the type of the ctx->rc variable is ssize_t. Therefore, during the ternary operation, the value of rc is automatically converted to an unsigned number. The final result is ctx->rc=4294967274. However, the expected result is ctx->rc=-22. https://patchwork.kernel.org/patch/11444477/ Signed-off-by: Yilu Lin <linyilu(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e92513e..23b1098 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3347,7 +3347,7 @@ ssize_t cifs_user_writev(struct kiocb *iocb, struct iov_iter *from) if (rc == -ENODATA) rc = 0; - ctx->rc = (rc == 0) ? ctx->total_len : rc; + ctx->rc = (rc == 0) ? (ssize_t)ctx->total_len : rc; mutex_unlock(&ctx->aio_mutex); -- 1.8.3

1 0

[PATCH 1/2] net/hinic: slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets.
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets. When vm is rebooting, VF receives lots of broadcast packects and VF may be disconnected. VF receives broadcast packect and VF driver will clear INTR_ON flag in setting msix process. Then VF driver will not enable interrupt if INTR_ON flag is set. As a result, VF will not process any hadware interrpt. In order to solve this problem, VF driver should be enable the interrpt first and then set msix state. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 9b53a6f..b6da9fe 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -759,6 +759,8 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) goto req_tx_irq_err; } + set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); @@ -768,7 +770,6 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) hinic_set_msix_state(nic_dev->hwdev, irq_cfg->msix_entry_idx, HINIC_MSIX_ENABLE); - set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); } INIT_DELAYED_WORK(&nic_dev->moderation_task, -- 1.8.3

1 1

[PATCH] openeuler/config: disable CONFIG_EFI_VARS
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31390 CVE: NA Accessing sysfs-efivars interface '/sys/firmware/efi/vars' may have some problem. We can access the new efivarfs interface '/sys/firmware/efi/efivars' instead. So disable CONFIG_EFI_VARS and keep CONFIG_EFIVAR_FS enabled. Link: https://gitee.com/openeuler/kernel/issues/I1BN57 Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index a024ce2..9e6f560 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -580,10 +580,8 @@ CONFIG_HAVE_ARM_SMCCC=y # # EFI (Extensible Firmware Interface) Support # -CONFIG_EFI_VARS=y +#CONFIG_EFI_VARS is not set CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=y -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y CONFIG_EFI_PARAMS_FROM_FDT=y CONFIG_EFI_RUNTIME_WRAPPERS=y CONFIG_EFI_ARMSTUB=y -- 1.8.3

1 0

[PATCH] pagecache: support percpu refcount to imporve performance
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: pagecache percpu refcount bugzilla: 31398 CVE: NA ------------------------------------------------- The pagecache manages the file physical pages, and the life cycle of page is managed by atomic counting. With the increasing number of cpu cores, the cost of atomic counting is very large when reading file pagecaches at large concurrent. For example, when running nginx http application, the biggest hotspot is found in the atomic operation of find_get_entry(): 11.94% [kernel] [k] find_get_entry 7.45% [kernel] [k] do_tcp_sendpages 6.12% [kernel] [k] generic_file_buffered_read So we using the percpu refcount mechanism to fix this problem. and the test result show that the read performance of nginx http can be improved by 100%： worker original(requests/sec) percpu(requests/sec) imporve 64 759656.87 1627088.95 114.2% Notes: we use page->lru to save percpu information, so the pages with percpu attribute will not be recycled by memory recycling process, we should avoid grow the file size unlimited. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/fcntl.c | 20 ++++++++++++ include/linux/mm.h | 23 +++++++++++++ include/linux/page-flags.h | 2 ++ include/linux/page_ref.h | 11 +++++++ include/linux/pagemap.h | 24 ++++++++++++++ include/trace/events/mmflags.h | 3 +- include/uapi/linux/fcntl.h | 2 ++ mm/filemap.c | 74 ++++++++++++++++++++++++++++++++++++++++-- mm/swap.c | 2 ++ 9 files changed, 158 insertions(+), 3 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 4137d96..0c70a8e 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -29,6 +29,7 @@ #include <linux/poll.h> #include <asm/siginfo.h> #include <linux/uaccess.h> +#include <linux/pagemap.h> #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) @@ -319,6 +320,22 @@ static long fcntl_rw_hint(struct file *file, unsigned int cmd, } } +static long fcntl_mapping_percpu(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct address_space *mapping = filp->f_mapping; + unsigned long flag = arg; + + if (!mapping) + return -EINVAL; + + if (flag) + mapping_set_percpu_ref(mapping); + else + mapping_clear_percpu_ref(mapping); + return 0; +} + static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, struct file *filp) { @@ -426,6 +443,9 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_SET_FILE_RW_HINT: err = fcntl_rw_hint(filp, cmd, arg); break; + case F_MAPPING_PERCPU: + err = fcntl_mapping_percpu(filp, cmd, arg); + break; default: break; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 65d91b1..0e173a4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -528,6 +528,10 @@ static inline int pgd_devmap(pgd_t pgd) static inline int put_page_testzero(struct page *page) { VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return 0; + } return page_ref_dec_and_test(page); } @@ -539,6 +543,10 @@ static inline int put_page_testzero(struct page *page) */ static inline int get_page_unless_zero(struct page *page) { + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } return page_ref_add_unless(page, 1, 0); } @@ -928,6 +936,11 @@ static inline bool is_device_public_page(const struct page *page) static inline void get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return; + } /* * Getting a normal page or the head of a compound page * requires to already have an elevated page->_refcount. @@ -939,6 +952,11 @@ static inline void get_page(struct page *page) static inline __must_check bool try_get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } if (WARN_ON_ONCE(page_ref_count(page) <= 0)) return false; page_ref_inc(page); @@ -949,6 +967,11 @@ static inline void put_page(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return; + } + /* * For devmap managed pages we need to catch refcount transition from * 2 to 1, when refcount reach one it means the page is free and we diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 3f066ce..7eb776a 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -101,6 +101,7 @@ enum pageflags { PG_young, PG_idle, #endif + PG_percpu_ref, __NR_PAGEFLAGS, /* Filesystems */ @@ -385,6 +386,7 @@ static inline bool set_hwpoison_free_buddy_page(struct page *page) TESTCLEARFLAG(Young, young, PF_ANY) PAGEFLAG(Idle, idle, PF_ANY) #endif +PAGEFLAG(PercpuRef, percpu_ref, PF_ANY) /* * On an anonymous page mapped into a user virtual memory area, diff --git a/include/linux/page_ref.h b/include/linux/page_ref.h index 14d14be..3deab40 100644 --- a/include/linux/page_ref.h +++ b/include/linux/page_ref.h @@ -180,4 +180,15 @@ static inline void page_ref_unfreeze(struct page *page, int count) __page_ref_unfreeze(page, count); } +static inline struct percpu_ref *page_percpu_ref(struct page *page) +{ + return *(struct percpu_ref **)&page->lru; +} + +static inline void page_set_percpu_ref(struct page *page, + struct percpu_ref *ref) +{ + *(struct percpu_ref **)&page->lru = ref; +} + #endif diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 520627f..e889d99 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -29,6 +29,7 @@ enum mapping_flags { AS_EXITING = 4, /* final truncate in progress */ /* writeback related tags are not used */ AS_NO_WRITEBACK_TAGS = 5, + AS_PERCPU_REF = 6, /* percpu ref counter for special inode */ }; /** @@ -97,6 +98,21 @@ static inline int mapping_use_writeback_tags(struct address_space *mapping) return !test_bit(AS_NO_WRITEBACK_TAGS, &mapping->flags); } +static inline void mapping_set_percpu_ref(struct address_space *mapping) +{ + set_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline void mapping_clear_percpu_ref(struct address_space *mapping) +{ + clear_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline int mapping_percpu_ref(struct address_space *mapping) +{ + return test_bit(AS_PERCPU_REF, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return mapping->gfp_mask; @@ -170,6 +186,10 @@ static inline int page_cache_get_speculative(struct page *page) # ifdef CONFIG_PREEMPT_COUNT VM_BUG_ON(!in_atomic() && !irqs_disabled()); # endif + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } /* * Preempt must be disabled here - we rely on rcu_read_lock doing * this for us. @@ -183,6 +203,10 @@ static inline int page_cache_get_speculative(struct page *page) page_ref_inc(page); #else + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } if (unlikely(!get_page_unless_zero(page))) { /* * Either the page has been freed, or will be freed. diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h index a81cffb..2994f1c 100644 --- a/include/trace/events/mmflags.h +++ b/include/trace/events/mmflags.h @@ -104,7 +104,8 @@ IF_HAVE_PG_UNCACHED(PG_uncached, "uncached" ) \ IF_HAVE_PG_HWPOISON(PG_hwpoison, "hwpoison" ) \ IF_HAVE_PG_IDLE(PG_young, "young" ) \ -IF_HAVE_PG_IDLE(PG_idle, "idle" ) +IF_HAVE_PG_IDLE(PG_idle, "idle"), \ + {1UL << PG_percpu_ref, "percpu_ref" } #define show_page_flags(flags) \ (flags) ? __print_flags(flags, "|", \ diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 6448cdd..6dcddf7 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -53,6 +53,8 @@ #define F_GET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 13) #define F_SET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 14) +#define F_MAPPING_PERCPU (F_LINUX_SPECIFIC_BASE + 15) + /* * Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be * used to clear any hints previously set. diff --git a/mm/filemap.c b/mm/filemap.c index c56c419..8a8bf78 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -48,6 +48,66 @@ #include <asm/mman.h> +struct percpu_page { + struct percpu_ref ref; + struct page *page; +}; + +static void free_page_ref(struct percpu_ref *ref) +{ + struct percpu_page *p = (struct percpu_page *)ref; + struct page *page = p->page; + + percpu_ref_exit(ref); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); + + ClearPagePercpuRef(page); + /* really free the page */ + put_page(page); +} + +static void page_cache_init(struct address_space *mapping, struct page *page) +{ + struct percpu_page *p; + + if (!mapping_percpu_ref(mapping)) + return; + + p = kzalloc(sizeof(struct percpu_page), GFP_KERNEL); + if (!p) + return; + if (percpu_ref_init(&p->ref, free_page_ref, 0, GFP_KERNEL)) + goto err; + + p->page = page; + page_set_percpu_ref(page, &p->ref); + SetPagePercpuRef(page); + get_page(page); + return; +err: + kfree(p); +} + +static void page_cache_exit(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + + put_page(page); + ClearPagePercpuRef(page); + percpu_ref_exit(page_percpu_ref(page)); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); +} + +static void page_cache_kill(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + percpu_ref_kill(page_percpu_ref(page)); +} + /* * Shared mappings implemented 30.11.1994. It's not fully working yet, * though. @@ -264,6 +324,7 @@ void __delete_from_page_cache(struct page *page, void *shadow) unaccount_page_cache_page(mapping, page); page_cache_tree_delete(mapping, page, shadow); + page_cache_kill(page); } static void page_cache_free_page(struct address_space *mapping, @@ -384,8 +445,10 @@ void delete_from_page_cache_batch(struct address_space *mapping, page_cache_tree_delete_batch(mapping, pvec); xa_unlock_irqrestore(&mapping->i_pages, flags); - for (i = 0; i < pagevec_count(pvec); i++) + for (i = 0; i < pagevec_count(pvec); i++) { + page_cache_kill(pvec->pages[i]); page_cache_free_page(mapping, pvec->pages[i]); + } } int filemap_check_errors(struct address_space *mapping) @@ -966,7 +1029,8 @@ int add_to_page_cache_lru(struct page *page, struct address_space *mapping, workingset_activation(page); } else ClearPageActive(page); - lru_cache_add(page); + if (!PagePercpuRef(page)) + lru_cache_add(page); } return ret; } @@ -1630,8 +1694,10 @@ struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset, if (fgp_flags & FGP_ACCESSED) __SetPageReferenced(page); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, offset, gfp_mask); if (unlikely(err)) { + page_cache_exit(page); put_page(page); page = NULL; if (err == -EEXIST) @@ -2320,9 +2386,11 @@ static ssize_t generic_file_buffered_read(struct kiocb *iocb, error = -ENOMEM; goto out; } + page_cache_init(mapping, page); error = add_to_page_cache_lru(page, mapping, index, mapping_gfp_constraint(mapping, GFP_KERNEL)); if (error) { + page_cache_exit(page); put_page(page); if (error == -EEXIST) { error = 0; @@ -2837,8 +2905,10 @@ static struct page *do_read_cache_page(struct address_space *mapping, page = __page_cache_alloc(gfp); if (!page) return ERR_PTR(-ENOMEM); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, index, gfp); if (unlikely(err)) { + page_cache_exit(page); put_page(page); if (err == -EEXIST) goto repeat; diff --git a/mm/swap.c b/mm/swap.c index 45fdbfb..320ac35 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -372,6 +372,8 @@ static void __lru_cache_activate_page(struct page *page) void mark_page_accessed(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) + return; if (!PageActive(page) && !PageUnevictable(page) && PageReferenced(page)) { -- 1.8.3

1 0

[PATCH] arm64: mm: support setting page attributes for debugging
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: Memory debug feature ------------------------------------------------- When pagealloc debug is enabled, block mappings or contiguous hints are no longer used for linear address area. Therefore, support setting page attributes in this case is useful for debugging memory corruption problems. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/mm/pageattr.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index a5635937..3e398d0 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -87,8 +87,16 @@ static int change_memory_common(unsigned long addr, int numpages, area = find_vm_area((void *)addr); if (!area || end > (unsigned long)area->addr + area->size || - !(area->flags & VM_ALLOC)) + !(area->flags & VM_ALLOC)) { + /* + * When pagealloc debug is enabled, the linear address is + * mapped with NO_BLOCK_MAPPINGS and NO_CONT_MAPPINGS flags. + */ + if (numpages && debug_pagealloc_enabled()) + return __change_memory_common(start, size, + set_mask, clear_mask); return -EINVAL; + } if (!numpages) return 0; -- 1.8.3

1 0

[PATCH] staging: android: ashmem: Disallow ashmem memory from being remapped
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Suren Baghdasaryan <surenb(a)google.com> commit 6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by: Jann Horn <jannh(a)google.com> Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Cc: stable <stable(a)vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4 Signed-off-by: Todd Kjos <tkjos(a)google.com> Reviewed-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/staging/android/ashmem.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c index be81533..e3df4bf 100644 --- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -350,8 +350,23 @@ static inline vm_flags_t calc_vm_may_flags(unsigned long prot) _calc_vm_trans(prot, PROT_EXEC, VM_MAYEXEC); } +static int ashmem_vmfile_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* do not allow to mmap ashmem backing shmem file directly */ + return -EPERM; +} + +static unsigned long +ashmem_vmfile_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + return current->mm->get_unmapped_area(file, addr, len, pgoff, flags); +} + static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) { + static struct file_operations vmfile_fops; struct ashmem_area *asma = file->private_data; int ret = 0; @@ -392,6 +407,19 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) } vmfile->f_mode |= FMODE_LSEEK; asma->file = vmfile; + /* + * override mmap operation of the vmfile so that it can't be + * remapped which would lead to creation of a new vma with no + * asma permission checks. Have to override get_unmapped_area + * as well to prevent VM_BUG_ON check for f_ops modification. + */ + if (!vmfile_fops.mmap) { + vmfile_fops = *vmfile->f_op; + vmfile_fops.mmap = ashmem_vmfile_mmap; + vmfile_fops.get_unmapped_area = + ashmem_vmfile_get_unmapped_area; + } + vmfile->f_op = &vmfile_fops; } get_file(asma->file); -- 1.8.3

1 0

[PATCH 0/2] more fixes about CVE-2020-8648
by Yang Yingliang 16 Mar '20

16 Mar '20

Jiri Slaby (2): vt: selection, push console lock down vt: selection, push sel_lock up drivers/tty/vt/selection.c | 27 ++++++++++++++++++--------- drivers/tty/vt/vt.c | 2 -- 2 files changed, 18 insertions(+), 11 deletions(-) -- 1.8.3

1 2

[PATCH] mm/resource: Return real error codes from walk failures
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Dave Hansen <dave.hansen(a)linux.intel.com> mainline inclusion from mainline-v5.1-rc1 commit 5cd401ace914dc68556c6d2fcae0c349444d5f86 category: bugfix bugzilla: 17339 CVE: NA ------------------------------------------------- walk_system_ram_range() can return an error code either becuase *it* failed, or because the 'func' that it calls returned an error. The memory hotplug does the following: ret = walk_system_ram_range(..., func); if (ret) return ret; and 'ret' makes it out to userspace, eventually. The problem s, walk_system_ram_range() failues that result from *it* failing (as opposed to 'func') return -1. That leads to a very odd -EPERM (-1) return code out to userspace. Make walk_system_ram_range() return -EINVAL for internal failures to keep userspace less confused. This return code is compatible with all the callers that I audited. Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Michael Ellerman <mpe(a)ellerman.id.au> (powerpc) Cc: Dan Williams <dan.j.williams(a)intel.com> Cc: Dave Jiang <dave.jiang(a)intel.com> Cc: Ross Zwisler <zwisler(a)kernel.org> Cc: Vishal Verma <vishal.l.verma(a)intel.com> Cc: Tom Lendacky <thomas.lendacky(a)amd.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.com> Cc: linux-nvdimm(a)lists.01.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: Huang Ying <ying.huang(a)intel.com> Cc: Fengguang Wu <fengguang.wu(a)intel.com> Cc: Borislav Petkov <bp(a)suse.de> Cc: Yaowei Bai <baiyaowei(a)cmss.chinamobile.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jerome Glisse <jglisse(a)redhat.com> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Paul Mackerras <paulus(a)samba.org> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: Keith Busch <keith.busch(a)intel.com> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> --- kernel/resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index bce773c..7dd11c7 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -377,7 +377,7 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, int (*func)(struct resource *, void *)) { struct resource res; - int ret = -1; + int ret = -EINVAL; while (start < end && !find_next_iomem_res(start, end, flags, desc, @@ -456,7 +456,7 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, unsigned long flags; struct resource res; unsigned long pfn, end_pfn; - int ret = -1; + int ret = -EINVAL; start = (u64) start_pfn << PAGE_SHIFT; end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1; -- 1.8.3

1 0

[PATCH 0/2] fixes CVE-2020-1749
by Yang Yingliang 16 Mar '20

16 Mar '20

1 2

[PATCH] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- arch/x86/configs/openeuler_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index f5579a2..4dd4540 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -2181,7 +2181,7 @@ CONFIG_VMWARE_PVSCSI=m CONFIG_HYPERV_STORAGE=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m CONFIG_FCOE_FNIC=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set -- 2.7.4

1 0

[PATCH hulk-4.19-next] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set -- 2.7.4

1 0

[PATCH] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH 0/4] update hns3 driver
by Yang Yingliang 14 Mar '20

14 Mar '20

shenhao (4): net: hns3: adds support for extended VLAN mode and 'QOS' in vlan 802.1Q protocol. net: hns3: Increase vlan tag0 when close the port_base_vlan net: hns3: add dumping vlan filter config in debugfs net: hns3: update the number of version drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 3 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 57 ++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 288 ++++++++++++++++----- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 11 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 9 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 13 files changed, 311 insertions(+), 80 deletions(-) -- 1.8.3

1 4

[PATCH hulk-4.19-next] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH] net/hinic: driver code compliance rectification
by Yang Yingliang 12 Mar '20

12 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- hinic driver code compliance rectification. 1.Process return value of snprintf and sscanf function. 2.Modify devil number. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../net/ethernet/huawei/hinic/hinic_dbgtool_knl.c | 4 +- drivers/net/ethernet/huawei/hinic/hinic_eqs.c | 24 +++++++--- drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 56 +++++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_hwdev.c | 53 ++++++++++++++------ drivers/net/ethernet/huawei/hinic/hinic_lld.c | 48 ++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_main.c | 11 ++++- drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c | 8 +++- drivers/net/ethernet/huawei/hinic/hinic_nictool.c | 12 +++-- 8 files changed, 165 insertions(+), 51 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c index 1c9c469..535f41a 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c @@ -768,7 +768,7 @@ int dbgtool_knl_init(void *vhwdev, void *chip_node) sema_init(&dbgtool_info->dbgtool_sem, 1); ret = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (ret < 0) { + if (ret <= 0) { pr_err("Failed to get hinic id\n"); goto sscanf_chdev_fail; } @@ -874,7 +874,7 @@ void dbgtool_knl_deinit(void *vhwdev, void *chip_node) return; err = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); g_card_node_array[id] = NULL; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c index 4b2b0c0..3fee9fb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c @@ -1133,15 +1133,27 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwdev *hwdev, u16 q_id, } if (type == HINIC_AEQ) { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_aeq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_aeq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, aeq_interrupt, 0UL, eq->irq_name, eq); } else { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_ceq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_ceq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, ceq_interrupt, 0UL, eq->irq_name, eq); } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c index 37d8d38..ac711da 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c @@ -294,12 +294,15 @@ u32 hinic_get_io_stats_size(struct hinic_nic_dev *nic_dev) } #define QUEUE_STATS_PACK(items, item_idx, array, stats_ptr, qid) { \ - int j; \ + int j, err; \ for (j = 0; j < ARRAY_LEN(array); j++) { \ memcpy((items)[item_idx].name, (array)[j].name, \ HINIC_SHOW_ITEM_LEN); \ - snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN, \ + err = snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN,\ (array)[j].name, (qid)); \ + if (err <= 0 || err >= HINIC_SHOW_ITEM_LEN) \ + pr_err("Failed snprintf: func_ret(%d), dest_len(%d)\n",\ + err, HINIC_SHOW_ITEM_LEN); \ (items)[item_idx].hexadecimal = 0; \ (items)[item_idx].value = \ GET_VALUE_OF_PTR((array)[j].size, \ @@ -335,6 +338,8 @@ void hinic_get_io_stats(struct hinic_nic_dev *nic_dev, #define LP_DEFAULT_TIME (5) /* seconds */ #define LP_PKT_LEN (1514) +#define OBJ_STR_MAX_LEN (32) +#define SET_LINK_STR_MAX_LEN (128) #define PORT_DOWN_ERR_IDX 0 enum diag_test_index { @@ -743,16 +748,28 @@ static int hinic_set_settings_to_hw(struct hinic_nic_dev *nic_dev, struct net_device *netdev = nic_dev->netdev; struct hinic_link_ksettings settings = {0}; enum nic_speed_level speed_level = 0; - char set_link_str[128] = {0}; + char set_link_str[SET_LINK_STR_MAX_LEN] = {0}; int err = 0; - snprintf(set_link_str, sizeof(set_link_str), "%s", - (set_settings & HILINK_LINK_SET_AUTONEG) ? - (autoneg ? "autong enable " : "autong disable ") : ""); + err = snprintf(set_link_str, sizeof(set_link_str), "%s", + (set_settings & HILINK_LINK_SET_AUTONEG) ? + (autoneg ? "autong enable " : "autong disable ") : ""); + if (err < 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link state, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } if (set_settings & HILINK_LINK_SET_SPEED) { speed_level = hinic_ethtool_to_hw_speed_level(speed); - snprintf(set_link_str, sizeof(set_link_str), - "%sspeed %d ", set_link_str, speed); + err = snprintf(set_link_str, sizeof(set_link_str), + "%sspeed %d ", set_link_str, speed); + if (err <= 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link speed, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } } settings.valid_bitmap = set_settings; @@ -883,7 +900,12 @@ static void hinic_get_drvinfo(struct net_device *netdev, return; } - snprintf(info->fw_version, sizeof(info->fw_version), "%s", mgmt_ver); + err = snprintf(info->fw_version, sizeof(info->fw_version), + "%s", mgmt_ver); + if (err <= 0 || err >= (int)sizeof(info->fw_version)) + nicif_err(nic_dev, drv, netdev, + "Failed snprintf fw_version, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(info->fw_version)); } static u32 hinic_get_msglevel(struct net_device *netdev) @@ -1429,10 +1451,22 @@ static int __hinic_set_coalesce(struct net_device *netdev, if (queue == COALESCE_ALL_QUEUE) { ori_intr_coal = &nic_dev->intr_coalesce[0]; - snprintf(obj_str, sizeof(obj_str), "for netdev"); + err = snprintf(obj_str, sizeof(obj_str), "for netdev"); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } else { ori_intr_coal = &nic_dev->intr_coalesce[queue]; - snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + err = snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } CHECK_COALESCE_CHANGED(coal, rx_coalesce_usecs, COALESCE_TIMER_CFG_UNIT, ori_intr_coal->coalesce_timer_cfg, obj_str); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c index a31bb6c..c2454f6 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c @@ -519,6 +519,9 @@ static inline void __set_heartbeat_ehd_detect_delay(struct hinic_hwdev *hwdev, #define HINIC_QUEUE_MAX_DEPTH 12 #define HINIC_MAX_RX_BUFFER_SIZE 15 +#define CAP_INFO_MAC_LEN 512 +#define VENDOR_MAX_LEN 17 + static bool check_root_ctxt(struct hinic_hwdev *hwdev, u16 func_idx, void *buf_in, u16 in_size) { @@ -3891,6 +3894,7 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, char tmp_vendor[17] = {0}; char *port_type = "Unknown port type"; int i; + int err = 0; if (info->cable_absent) { sdk_info(hwdev->dev_hdl, "Cable unpresent\n"); @@ -3918,24 +3922,45 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, memcpy(tmp_vendor, info->vendor_name, sizeof(info->vendor_name)); - snprintf(tmp_str, sizeof(tmp_str) - 1, - "Vendor: %s, %s, length: %um, max_speed: %uGbps", - tmp_vendor, port_type, info->cable_length, - info->cable_max_speed); + err = snprintf(tmp_str, sizeof(tmp_str), + "Vendor: %s, %s, length: %um, max_speed: %uGbps", + tmp_vendor, port_type, info->cable_length, + info->cable_max_speed); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable vendor info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->port_type == LINK_PORT_FIBRE || info->port_type == LINK_PORT_AOC) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, %s, Temperature: %u", tmp_str, - info->sfp_type ? "SFP" : "QSFP", info->cable_temp); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, %s, Temperature: %u", tmp_str, + info->sfp_type ? "SFP" : "QSFP", + info->cable_temp); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable Temp, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->sfp_type) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuW, tx power: %uuW", - tmp_str, info->power[0], info->power[1]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuW, tx power: %uuW", + tmp_str, info->power[0], info->power[1]); } else { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuw %uuW %uuW %uuW", - tmp_str, info->power[0], info->power[1], - info->power[2], info->power[3]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuw %uuW %uuW %uuW", + tmp_str, info->power[0], info->power[1], + info->power[2], info->power[3]); + } + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf power info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; } } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_lld.c b/drivers/net/ethernet/huawei/hinic/hinic_lld.c index 357e050..8a2f280 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_lld.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_lld.c @@ -629,6 +629,7 @@ static void hinic_ignore_minor_version(char *version) { char ver_split[MAX_VER_SPLIT_NUM][MAX_VER_FIELD_LEN] = { {0} }; int max_ver_len, split_num = 0; + int err; __version_split(version, &split_num, ver_split); if (split_num != MAX_VER_SPLIT_NUM) @@ -637,8 +638,11 @@ static void hinic_ignore_minor_version(char *version) max_ver_len = (int)strlen(version) + 1; memset(version, 0, max_ver_len); - snprintf(version, max_ver_len, "%s.%s.%s.0", - ver_split[0], ver_split[1], ver_split[2]); + err = snprintf(version, max_ver_len, "%s.%s.%s.0", + ver_split[0], ver_split[1], ver_split[2]); + if (err <= 0 || err >= max_ver_len) + pr_err("Failed snprintf version, function return(%d) and dest_len(%d)\n", + err, max_ver_len); } static int hinic_detect_version_compatible(struct hinic_pcidev *pcidev) @@ -1152,7 +1156,7 @@ void hinic_get_all_chip_id(void *id_info) lld_dev_hold(); list_for_each_entry(chip_node, &g_hinic_chip_list, node) { err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); card_id->id[i] = id; @@ -1895,6 +1899,7 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) struct card_node *chip_node; unsigned char i; unsigned char parent_bus_number = 0; + int err; if (!pci_is_root_bus(pci_adapter->pcidev->bus)) parent_bus_number = pci_adapter->pcidev->bus->parent->number; @@ -1931,27 +1936,39 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) chip_node = kzalloc(sizeof(*chip_node), GFP_KERNEL); if (!chip_node) { - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc chip node\n"); - return -ENOMEM; + goto alloc_chip_err; } chip_node->dbgtool_attr_file.name = kzalloc(IFNAMSIZ, GFP_KERNEL); if (!(chip_node->dbgtool_attr_file.name)) { - kfree(chip_node); - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc dbgtool attr file name\n"); - return -ENOMEM; + goto alloc_dbgtool_attr_file_err; } /* parent bus number */ chip_node->dp_bus_num = parent_bus_number; - snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); - snprintf((char *)chip_node->dbgtool_attr_file.name, - IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + err = snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", + HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf chip_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + + err = snprintf((char *)chip_node->dbgtool_attr_file.name, + IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf dbgtool_attr_file_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + sdk_info(&pci_adapter->pcidev->dev, "Add new chip %s to global list succeed\n", chip_node->chip_name); @@ -1962,6 +1979,13 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) pci_adapter->chip_node = chip_node; return 0; + +alloc_dbgtool_attr_file_err: + kfree(chip_node); + +alloc_chip_err: + card_bit_map = CLEAR_BIT(card_bit_map, i); + return -ENOMEM; } static void free_chip_node(struct hinic_pcidev *pci_adapter) @@ -1976,7 +2000,7 @@ static void free_chip_node(struct hinic_pcidev *pci_adapter) "Delete chip %s from global list succeed\n", chip_node->chip_name); err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%u", &id); - if (err < 0) + if (err <= 0) sdk_err(&pci_adapter->pcidev->dev, "Failed to get hinic id\n"); card_bit_map = CLEAR_BIT(card_bit_map, id); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 5960603..9b53a6f 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -750,8 +750,15 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) cpumask_set_cpu(local_cpu, &irq_cfg->affinity_mask); } - snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), - "%s_qp%d", nic_dev->netdev->name, q_id); + err = snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), + "%s_qp%d", nic_dev->netdev->name, q_id); + if (err <= 0 || err >= (int)sizeof(irq_cfg->irq_name)) { + nic_err(&pdev->dev, + "Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(irq_cfg->irq_name)); + goto req_tx_irq_err; + } + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c index 8d89d30..cac0cdb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c @@ -2175,7 +2175,13 @@ int hinic_get_mgmt_version(void *hwdev, u8 *mgmt_ver) return -EINVAL; } - snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + err = snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + if (err <= 0 || err >= HINIC_MGMT_VERSION_MAX_LEN) { + nic_err(dev->dev_hdl, + "Failed snprintf fw version, function return(%d) and dest_len(%d)\n", + err, HINIC_MGMT_VERSION_MAX_LEN); + return -EINVAL; + } return 0; } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c index 9a2cb00..46dd9ec 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c @@ -1179,14 +1179,20 @@ static int get_drv_version(void *hwdev, void *buf_in, u32 in_size, { struct drv_version_info *ver_info; char ver_str[MAX_VER_INFO_LEN] = {0}; + int err; if (*out_size != sizeof(*ver_info)) { pr_err("Unexpect out buf size from user :%d, expect: %lu\n", *out_size, sizeof(*ver_info)); return -EFAULT; } - snprintf(ver_str, sizeof(ver_str), "%s [compiled with the kernel]", - HINIC_DRV_VERSION); + err = snprintf(ver_str, sizeof(ver_str), + "%s [compiled with the kernel]", HINIC_DRV_VERSION); + if (err <= 0 || err >= MAX_VER_INFO_LEN) { + pr_err("Failed snprintf driver version, function return(%d) and dest_len(%d)\n", + err, MAX_VER_INFO_LEN); + return -EFAULT; + } ver_info = (struct drv_version_info *)buf_out; memcpy(ver_info->ver, ver_str, sizeof(ver_str)); @@ -1420,7 +1426,7 @@ static int get_card_func_info(char *dev_name, struct msg_module *nt_msg) } err = sscanf(dev_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) { + if (err <= 0) { pr_err("Failed to get hinic id\n"); return err; } -- 1.8.3

1 0

[PATCH 0/3] update hinic and hns3 driver
by Yang Yingliang 12 Mar '20

12 Mar '20

Shaozhengchao (1): net/hinic: Solve the problem that the network card hangs when receiving the skb which frag_size=0 Shengzui You (2): net: hns3: update hns3 version to 1.9.37.1 net: hns3: adds support for reading module eeprom info drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 79 ++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 15 +++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 102 +++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/kcompat.h | 10 ++ drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_tx.c | 65 ++++++++++--- drivers/net/ethernet/huawei/hinic/hinic_tx.h | 2 + 12 files changed, 269 insertions(+), 19 deletions(-) -- 1.8.3

1 3

[PATCH 0/5] fixes some CVE and bug
by Yang Yingliang 12 Mar '20

12 Mar '20

Cengiz Can (1): blktrace: fix dereference after null check Jan Kara (1): blktrace: Protect q->blk_trace with RCU Qu Wenruo (1): btrfs: tree-checker: Remove comprehensive root owner check Zhang Xiaoxu (1): vgacon: Fix a UAF in vgacon_invert_region Zheng Bin (1): xfs: add agf freeblocks verify in xfs_agf_verify drivers/video/console/vgacon.c | 3 ++ fs/btrfs/tree-checker.c | 24 --------- fs/xfs/libxfs/xfs_alloc.c | 16 ++++++ include/linux/blkdev.h | 2 +- include/linux/blktrace_api.h | 18 +++++-- kernel/trace/blktrace.c | 120 ++++++++++++++++++++++++++++++----------- 6 files changed, 122 insertions(+), 61 deletions(-) -- 1.8.3

1 5

[PATCH] vgacon: Fix a UAF in vgacon_invert_region
by Yang Yingliang 11 Mar '20

11 Mar '20

From: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> mainline inclusion from mainline-v5.6-rc4 commit 513dc792d6060d5ef572e43852683097a8420f56 category: bugfix bugzilla: 13690 CVE: CVE-2020-8647, CVE-2020-8649 ------------------------------------------------- When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangx… Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/video/console/vgacon.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index c6b3bdb..bfaa9ec 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1316,6 +1316,9 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) static int vgacon_resize(struct vc_data *c, unsigned int width, unsigned int height, unsigned int user) { + if ((width << 1) * height > vga_vram_size) + return -EINVAL; + if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ c->vc_font.height) -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.8.3

1 0

[PATCH] relay: handle alloc_percpu returning NULL in relay_open
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19462 ------------------------------------------------- alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP [c0000000003f3fec] relay_open+0x29c/0x600 LR [c0000000003f3fc0] relay_open+0x270/0x600 Call Trace: [c000000054353a70] [c0000000003f3fb4] relay_open+0x264/0x600 (unreliable) [c000000054353b00] [c000000000451764] __blk_trace_setup+0x254/0x600 [c000000054353bb0] [c000000000451b78] blk_trace_setup+0x68/0xa0 [c000000054353c10] [c0000000010da77c] sg_ioctl+0x7bc/0x2e80 [c000000054353cd0] [c000000000758cbc] do_vfs_ioctl+0x13c/0x1300 [c000000054353d90] [c000000000759f14] ksys_ioctl+0x94/0x130 [c000000054353de0] [c000000000759ff8] sys_ioctl+0x48/0xb0 [c000000054353e20] [c00000000000bcd0] system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. https://lore.kernel.org/lkml/20191219121256.26480-1-dja%40axtens.net/ Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/relay.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/relay.c b/kernel/relay.c index 9e0f523..078f733 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -581,6 +581,10 @@ struct rchan *relay_open(const char *base_filename, return NULL; chan->buf = alloc_percpu(struct rchan_buf *); + if (!chan->buf) { + kfree(chan); + return NULL; + } chan->version = RELAYFS_CHANNEL_VERSION; chan->n_subbufs = n_subbufs; chan->subbuf_size = subbuf_size; -- 1.8.3

1 0

[PATCH] drm/radeon: check the alloc_workqueue return value
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-16230 ------------------------------------------------- check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/radeon/radeon_display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index d8e2d7b..09522b9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -672,11 +672,16 @@ static void radeon_crtc_init(struct drm_device *dev, int index) if (radeon_crtc == NULL) return; + radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); + if (!radeon_crtc->flip_queue) { + kfree(radeon_crtc); + return; + } + drm_crtc_init(dev, &radeon_crtc->base, &radeon_crtc_funcs); drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256); radeon_crtc->crtc_id = index; - radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); rdev->mode_info.crtcs[index] = radeon_crtc; if (rdev->family >= CHIP_BONAIRE) { -- 1.8.3

1 0

[PATCH] apparmor: Fix use-after-free in aa_audit_rule_init
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Navid Emamdoost <navid.emamdoost(a)gmail.com> hulk inclusion category: bugfix bugzilla: NA CVE: CVE-2019-18814 --------------------------- In the implementation of aa_audit_rule_init(), when aa_label_parse() fails the allocated memory for rule is released using aa_audit_rule_free(). But after this release, the return statement tries to access the label field of the rule which results in use-after-free. Before releasing the rule, copy errNo and return it after release. Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path") Signed-off-by: Navid Emamdoost <navid.emamdoost(a)gmail.com> Reviewed-by: Tyler Hicks <tyhicks(a)canonical.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- security/apparmor/audit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/security/apparmor/audit.c b/security/apparmor/audit.c index eeaddfe..70b9730 100644 --- a/security/apparmor/audit.c +++ b/security/apparmor/audit.c @@ -201,8 +201,9 @@ int aa_audit_rule_init(u32 field, u32 op, char *rulestr, void **vrule) rule->label = aa_label_parse(&root_ns->unconfined->label, rulestr, GFP_KERNEL, true, false); if (IS_ERR(rule->label)) { + int err = PTR_ERR(rule->label); aa_audit_rule_free(rule); - return PTR_ERR(rule->label); + return err; } *vrule = rule; -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Xiongfeng Wang 09 Mar '20

09 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.7.12.4

1 0

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 5

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 0

[PATCH 0/3] fixes CVE-2020-2732
by Yang Yingliang 03 Mar '20

03 Mar '20

Oliver Upton (2): KVM: nVMX: Refactor IO bitmap checks into helper function KVM: nVMX: Check IO instruction VM-exit conditions Paolo Bonzini (1): KVM: nVMX: Don't emulate instructions in guest mode arch/x86/kvm/vmx.c | 99 +++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 79 insertions(+), 20 deletions(-) -- 1.8.3

1 3

[PATCH] floppy: check FDC index for errors before assigning it
by Yang Yingliang 03 Mar '20

03 Mar '20

From: Linus Torvalds <torvalds(a)linux-foundation.org> commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <jordy(a)simplyhacker.com> Cc: Willy Tarreau <w(a)1wt.eu> Cc: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/floppy.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index e71589e..bf222c4 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -852,14 +852,17 @@ static void reset_fdc_info(int mode) /* selects the fdc and drive, and enables the fdc's input/dma. */ static void set_fdc(int drive) { + unsigned int new_fdc = fdc; + if (drive >= 0 && drive < N_DRIVE) { - fdc = FDC(drive); + new_fdc = FDC(drive); current_drive = drive; } - if (fdc != 1 && fdc != 0) { + if (new_fdc >= N_FDC) { pr_info("bad fdc value\n"); return; } + fdc = new_fdc; set_dor(fdc, ~0, 8); #if N_FDC > 1 set_dor(1 - fdc, ~8, 0); -- 1.8.3

1 0

[PATCH] ext4: add cond_resched() to __ext4_find_entry()
by Shijie Luo 29 Feb '20

29 Feb '20

mainline inclusion from mainline-v5.6-rc3 commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e category: bugfix bugzilla: 31127 CVE: NA ------------------------------------------------- We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo <luoshijie1(a)huawei.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> Cc: stable(a)kernel.org --- fs/ext4/namei.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index ceff4b4b1877..b05ea72f38fd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1511,6 +1511,7 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir, /* * We deal with the read-ahead logic here. */ + cond_resched(); if (ra_ptr >= ra_max) { /* Refill the readahead buffer */ ra_ptr = 0; -- 2.19.1

2 1

[PATCH] x86 / config: add openeuler_defconfig
by Yang Yingliang 28 Feb '20

28 Feb '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31089 CVE: NA ----------------------------- Add openeuler_defconfig for openeuler itself. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-By: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 7530 ++++++++++++++++++++++++++++++++++ 1 file changed, 7530 insertions(+) create mode 100644 arch/x86/configs/openeuler_defconfig diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig new file mode 100644 index 00000000..1cf7b97 --- /dev/null +++ b/arch/x86/configs/openeuler_defconfig @@ -0,0 +1,7530 @@ +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=50400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +# CONFIG_KTASK is not set + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y +CONFIG_GENERIC_IRQ_RESERVATION_MODE=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_GENERIC_CMOS_UPDATE=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +# CONFIG_NO_HZ_IDLE is not set +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# CPU/Task time and stats accounting +# +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_CPU_ISOLATION=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_CONTEXT_TRACKING=y +# CONFIG_CONTEXT_TRACKING_FORCE is not set +CONFIG_RCU_NOCB_CPU=y +CONFIG_BUILD_BIN2C=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y +# CONFIG_CGROUP_FILES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_HAVE_PCSPKR_PLATFORM=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +CONFIG_SGETMASK_SYSCALL=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT_ALWAYS_ON=y +CONFIG_USERFAULTFD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLAB_MERGE_DEFAULT=y +CONFIG_SLAB_FREELIST_RANDOM=y +# CONFIG_SLAB_FREELIST_HARDENED is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_64BIT=y +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_MMU=y +CONFIG_ARCH_MMAP_RND_BITS_MIN=28 +CONFIG_ARCH_MMAP_RND_BITS_MAX=32 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_FILTER_PGPROT=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ZONE_DMA32=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_HAVE_INTEL_TXT=y +CONFIG_X86_64_SMP=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_DYNAMIC_PHYSICAL_MASK=y +CONFIG_PGTABLE_LEVELS=5 +CONFIG_CC_HAS_SANE_STACKPROTECTOR=y + +# +# Processor type and features +# +CONFIG_ZONE_DMA=y +CONFIG_SMP=y +CONFIG_X86_FEATURE_NAMES=y +CONFIG_X86_X2APIC=y +CONFIG_X86_MPPARSE=y +# CONFIG_GOLDFISH is not set +CONFIG_RETPOLINE=y +# CONFIG_INTEL_RDT is not set +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_NUMACHIP is not set +# CONFIG_X86_VSMP is not set +CONFIG_X86_UV=y +# CONFIG_X86_GOLDFISH is not set +# CONFIG_X86_INTEL_MID is not set +CONFIG_X86_INTEL_LPSS=y +CONFIG_X86_AMD_PLATFORM_DEVICE=y +CONFIG_IOSF_MBI=y +# CONFIG_IOSF_MBI_DEBUG is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_DEBUG is not set +CONFIG_PARAVIRT_SPINLOCKS=y +# CONFIG_QUEUED_LOCK_STAT is not set +CONFIG_XEN=y +# CONFIG_XEN_PV is not set +CONFIG_XEN_PVHVM=y +CONFIG_XEN_PVHVM_SMP=y +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +# CONFIG_XEN_PVH is not set +CONFIG_KVM_GUEST=y +# CONFIG_KVM_DEBUG_FS is not set +CONFIG_PARAVIRT_TIME_ACCOUNTING=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_JAILHOUSE_GUEST is not set +CONFIG_NO_BOOTMEM=y +# CONFIG_MK8 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set +CONFIG_GENERIC_CPU=y +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +# CONFIG_GART_IOMMU is not set +# CONFIG_CALGARY_IOMMU is not set +CONFIG_MAXSMP=y +CONFIG_NR_CPUS_RANGE_BEGIN=8192 +CONFIG_NR_CPUS_RANGE_END=8192 +CONFIG_NR_CPUS_DEFAULT=8192 +CONFIG_NR_CPUS=8192 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_MC_PRIO=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCELOG_LEGACY=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y + +# +# Performance monitoring +# +CONFIG_PERF_EVENTS_INTEL_UNCORE=m +CONFIG_PERF_EVENTS_INTEL_RAPL=m +CONFIG_PERF_EVENTS_INTEL_CSTATE=m +CONFIG_PERF_EVENTS_AMD_POWER=m +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX64=y +CONFIG_X86_VSYSCALL_EMULATION=y +CONFIG_I8K=m +CONFIG_MICROCODE=y +CONFIG_MICROCODE_INTEL=y +CONFIG_MICROCODE_AMD=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y +CONFIG_X86_5LEVEL=y +CONFIG_X86_DIRECT_GBPAGES=y +CONFIG_ARCH_HAS_MEM_ENCRYPT=y +CONFIG_AMD_MEM_ENCRYPT=y +# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set +CONFIG_NUMA=y +# CONFIG_NUMA_AWARE_SPINLOCKS is not set +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=10 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +# CONFIG_ARCH_MEMORY_PROBE is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_X86_PMEM_LEGACY_DEVICE=y +CONFIG_X86_PMEM_LEGACY=m +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set +CONFIG_X86_RESERVE_LOW=64 +CONFIG_MTRR=y +CONFIG_MTRR_SANITIZER=y +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 +CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_ARCH_RANDOM=y +CONFIG_X86_SMAP=y +CONFIG_X86_INTEL_UMIP=y +# CONFIG_X86_INTEL_MPX is not set +CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y +CONFIG_X86_INTEL_TSX_MODE_OFF=y +# CONFIG_X86_INTEL_TSX_MODE_ON is not set +# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set +CONFIG_EFI=y +CONFIG_EFI_STUB=y +CONFIG_EFI_MIXED=y +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_ARCH_HAS_KEXEC_PURGATORY=y +CONFIG_KEXEC_VERIFY_SIG=y +CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y +CONFIG_CRASH_DUMP=y +CONFIG_KEXEC_JUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_X86_NEED_RELOCS=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_DYNAMIC_MEMORY_LAYOUT=y +CONFIG_RANDOMIZE_MEMORY=y +CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa +CONFIG_HOTPLUG_CPU=y +CONFIG_BOOTPARAM_HOTPLUG_CPU0=y +# CONFIG_DEBUG_HOTPLUG_CPU0 is not set +# CONFIG_COMPAT_VDSO is not set +CONFIG_LEGACY_VSYSCALL_EMULATE=y +# CONFIG_LEGACY_VSYSCALL_NONE is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MODIFY_LDT_SYSCALL=y +CONFIG_HAVE_LIVEPATCH_FTRACE=y + +# +# Enable Livepatch +# +# CONFIG_LIVEPATCH is not set +CONFIG_ARCH_HAS_ADD_PAGES=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y +CONFIG_ARCH_ENABLE_THP_MIGRATION=y + +# +# Power management and ACPI options +# +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_PM_TRACE_RTC is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +CONFIG_ACPI_LPIT=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS_POWER is not set +CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y +CONFIG_ACPI_EC_DEBUGFS=m +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=y +CONFIG_ACPI_TAD=m +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_CPU_FREQ_PSS=y +CONFIG_ACPI_PROCESSOR_CSTATE=y +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y +CONFIG_ACPI_HOTPLUG_IOAPIC=y +CONFIG_ACPI_SBS=m +CONFIG_ACPI_HED=y +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_BGRT=y +CONFIG_ACPI_NFIT=m +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=m +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +CONFIG_DPTF_POWER=m +CONFIG_ACPI_WATCHDOG=y +CONFIG_ACPI_EXTLOG=m +CONFIG_PMIC_OPREGION=y +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_X86_PM_TIMER=y +CONFIG_SFI=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set + +# +# CPU frequency scaling drivers +# +CONFIG_X86_INTEL_PSTATE=y +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_ACPI_CPUFREQ=m +CONFIG_X86_ACPI_CPUFREQ_CPB=y +CONFIG_X86_POWERNOW_K8=m +CONFIG_X86_AMD_FREQ_SENSITIVITY=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +CONFIG_X86_P4_CLOCKMOD=m + +# +# shared options +# +CONFIG_X86_SPEEDSTEP_LIB=m + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_INTEL_IDLE=y + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_XEN=y +CONFIG_PCI_DOMAINS=y +CONFIG_MMCONF_FAM10H=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIEAER_INJECT=m +CONFIG_PCIE_ECRC=y +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +CONFIG_PCIE_DPC=y +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=y +CONFIG_PCI_PF_STUB=m +# CONFIG_XEN_PCIDEV_FRONTEND is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_LOCKLESS_CONFIG=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_HYPERV=m +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +CONFIG_HOTPLUG_PCI_SHPC=y + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +CONFIG_VMD=y + +# +# DesignWare PCI Core Support +# +# CONFIG_PCIE_DW_PLAT_HOST is not set +# CONFIG_HISILICON_PCIE_CAE is not set + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set +CONFIG_ISA_DMA_API=y +CONFIG_AMD_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA is not set +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_RAPIDIO is not set +# CONFIG_X86_SYSFB is not set + +# +# Binary Emulations +# +CONFIG_IA32_EMULATION=y +# CONFIG_X86_X32 is not set +CONFIG_COMPAT_32=y +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_X86_DEV_DMA_OPS=y +CONFIG_HAVE_GENERIC_GUP=y + +# +# Firmware Drivers +# +CONFIG_EDD=m +# CONFIG_EDD_OFF is not set +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DELL_RBU=m +CONFIG_DCDBAS=m +CONFIG_DMIID=y +CONFIG_DMI_SYSFS=y +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m +CONFIG_FW_CFG_SYSFS=y +# CONFIG_FW_CFG_SYSFS_CMDLINE is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_ESRT=y +CONFIG_EFI_VARS_PSTORE=y +CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y +CONFIG_EFI_RUNTIME_MAP=y +# CONFIG_EFI_FAKE_MEMMAP is not set +CONFIG_EFI_RUNTIME_WRAPPERS=y +# CONFIG_EFI_BOOTLOADER_CONTROL is not set +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_APPLE_PROPERTIES=y +# CONFIG_RESET_ATTACK_MITIGATION is not set +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_X86=y +CONFIG_EFI_DEV_PATH_PARSER=y + +# +# Tegra firmware driver +# +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_KVM_ASYNC_PF=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +CONFIG_KVM_INTEL=m +CONFIG_KVM_AMD=m +CONFIG_KVM_AMD_SEV=y +CONFIG_KVM_MMU_AUDIT=y +CONFIG_VHOST_NET=m +# CONFIG_VHOST_SCSI is not set +CONFIG_VHOST_VSOCK=m +CONFIG_VHOST=m +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +CONFIG_HOTPLUG_SMT=y +CONFIG_OPROFILE=m +CONFIG_OPROFILE_EVENT_MULTIPLEX=y +CONFIG_HAVE_OPROFILE=y +CONFIG_OPROFILE_NMI_TIMER=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +CONFIG_OPTPROBES=y +CONFIG_KPROBES_ON_FTRACE=y +CONFIG_UPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_RCU_TABLE_INVALIDATE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_HAVE_EXIT_THREAD=y +CONFIG_ARCH_MMAP_RND_BITS=28 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 +CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_STACK_VALIDATION=y +CONFIG_HAVE_RELIABLE_STACKTRACE=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_REFCOUNT=y +# CONFIG_REFCOUNT_FULL is not set +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_PLUGIN_HOSTCC="g++" +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +# CONFIG_MODULE_SIG_FORCE is not set +CONFIG_MODULE_SIG_ALL=y +# CONFIG_MODULE_SIG_SHA1 is not set +# CONFIG_MODULE_SIG_SHA224 is not set +CONFIG_MODULE_SIG_SHA256=y +# CONFIG_MODULE_SIG_SHA384 is not set +# CONFIG_MODULE_SIG_SHA512 is not set +CONFIG_MODULE_SIG_HASH="sha256" +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y +CONFIG_BLK_DEBUG_FS=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_MQ_RDMA=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_HAVE_BOOTMEM_INFO_NODE=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_ARCH_WANTS_THP_SWAP=y +CONFIG_THP_SWAP=y +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +# CONFIG_SHRINK_PAGECACHE is not set +# CONFIG_CMA is not set +CONFIG_MEM_SOFT_DIRTY=y +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +# CONFIG_Z3FOLD is not set +CONFIG_ZSMALLOC=y +# CONFIG_PGTABLE_MAPPING is not set +CONFIG_ZSMALLOC_STAT=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_DEFERRED_STRUCT_PAGE_INIT=y +CONFIG_IDLE_PAGE_TRACKING=y +CONFIG_ARCH_HAS_ZONE_DEVICE=y +CONFIG_ZONE_DEVICE=y +CONFIG_ARCH_HAS_HMM=y +CONFIG_MIGRATE_VMA_HELPER=y +CONFIG_DEV_PAGEMAP_OPS=y +CONFIG_HMM=y +CONFIG_HMM_MIRROR=y +CONFIG_DEVICE_PRIVATE=y +CONFIG_DEVICE_PUBLIC=y +CONFIG_FRAME_VECTOR=y +CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y +CONFIG_ARCH_HAS_PKEYS=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_NET=y +CONFIG_NET_INGRESS=y +CONFIG_NET_EGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_TLS=m +CONFIG_TLS_DEVICE=y +CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_INTERFACE=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +# CONFIG_SMC is not set +CONFIG_XDP_SOCKETS=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE_COMMON=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_INET_RAW_DIAG=m +# CONFIG_INET_DIAG_DESTROY is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +# CONFIG_TCP_CONG_CDG is not set +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +# CONFIG_IPV6_ILA is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_FAMILY_BRIDGE=y +CONFIG_NETFILTER_FAMILY_ARP=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_OSF=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NETFILTER_CONNCOUNT=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=y +CONFIG_NF_NAT_PROTO_UDPLITE=y +CONFIG_NF_NAT_PROTO_SCTP=y +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_SET=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_CONNLIMIT=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +# CONFIG_NFT_TUNNEL is not set +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +# CONFIG_NFT_SOCKET is not set +# CONFIG_NFT_OSF is not set +# CONFIG_NFT_TPROXY is not set +CONFIG_NF_DUP_NETDEV=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +# CONFIG_NF_FLOW_TABLE is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_IPMAC=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_MH is not set +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS MH scheduler +# +CONFIG_IP_VS_MH_TAB_INDEX=12 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_SOCKET_IPV4=m +CONFIG_NF_TPROXY_IPV4=m +CONFIG_NF_TABLES_IPV4=y +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_DUP_IPV4=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=y +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_SOCKET_IPV6=m +CONFIG_NF_TPROXY_IPV6=m +CONFIG_NF_TABLES_IPV6=y +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_DUP_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_INET_SCTP_DIAG=m +# CONFIG_RDS is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_IB=y +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_DIAG=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +# CONFIG_ATM_MPOA is not set +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +CONFIG_6LOWPAN=m +# CONFIG_6LOWPAN_DEBUGFS is not set +# CONFIG_6LOWPAN_NHC is not set +CONFIG_IEEE802154=m +# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +# CONFIG_NET_SCH_CBS is not set +# CONFIG_NET_SCH_ETF is not set +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +# CONFIG_NET_SCH_SKBPRIO is not set +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=y +# CONFIG_NET_SCH_CAKE is not set +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_DEFAULT_FQ is not set +# CONFIG_DEFAULT_CODEL is not set +CONFIG_DEFAULT_FQ_CODEL=y +# CONFIG_DEFAULT_SFQ is not set +# CONFIG_DEFAULT_PFIFO_FAST is not set +CONFIG_DEFAULT_NET_SCH="fq_codel" + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +# CONFIG_NET_EMATCH_CANID is not set +CONFIG_NET_EMATCH_IPSET=m +# CONFIG_NET_EMATCH_IPT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_SAMPLE=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_ACT_SKBMOD=m +# CONFIG_NET_ACT_IFE is not set +CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=m +# CONFIG_BATMAN_ADV is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +CONFIG_VSOCKETS=m +CONFIG_VSOCKETS_DIAG=m +CONFIG_VMWARE_VMCI_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS_COMMON=m +CONFIG_HYPERV_VSOCKETS=m +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_NET_NSH=y +# CONFIG_HSR is not set +CONFIG_NET_SWITCHDEV=y +CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_BPF_STREAM_PARSER=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=y +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_VXCAN is not set +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_C_CAN_PCI=m +CONFIG_CAN_CC770=m +# CONFIG_CAN_CC770_ISA is not set +CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_PEAK_PCIEFD is not set +CONFIG_CAN_SJA1000=m +# CONFIG_CAN_SJA1000_ISA is not set +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_PEAK_PCIEC=y +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SOFTING=m + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set + +# +# CAN USB interfaces +# +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +# CONFIG_CAN_GS_USB is not set +CONFIG_CAN_KVASER_USB=m +# CONFIG_CAN_MCBA_USB is not set +CONFIG_CAN_PEAK_USB=m +# CONFIG_CAN_UCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_CMTP=m +CONFIG_BT_HIDP=m +CONFIG_BT_HS=y +CONFIG_BT_LE=y +# CONFIG_BT_6LOWPAN is not set +# CONFIG_BT_LEDS is not set +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_RTL=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTUSB_RTL=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_STREAM_PARSER=y +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +CONFIG_MAC80211_DEBUGFS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y +# CONFIG_NFC is not set +CONFIG_PSAMPLE=m +# CONFIG_NET_IFE is not set +CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_SOCK_VALIDATE_XMIT=y +CONFIG_NET_DEVLINK=y +CONFIG_MAY_USE_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=m +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# +CONFIG_FW_LOADER=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set + +# +# Bus devices +# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_GNSS is not set +CONFIG_MTD=m +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# Partition parsers +# + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_SPI_NAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_SPI_NOR is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_MTD_HISILICON_SFC=m +# CONFIG_OF is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_PNP=y +# CONFIG_PNP_DEBUG_MESSAGES is not set + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +# CONFIG_BLK_DEV_FD is not set +CONFIG_CDROM=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y +# CONFIG_ZRAM_MEMORY_TRACKING is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_VIRTIO_BLK=m +# CONFIG_VIRTIO_BLK_SCSI is not set +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# NVME Support +# +CONFIG_NVME_CORE=m +CONFIG_BLK_DEV_NVME=m +CONFIG_NVME_MULTIPATH=y +CONFIG_NVME_FABRICS=m +CONFIG_NVME_RDMA=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_RDMA=m +CONFIG_NVME_TARGET_FC=m +CONFIG_NVME_TARGET_FCLOOP=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +# CONFIG_ICS932S401 is not set +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_SGI_XP=m +CONFIG_HP_ILO=m +CONFIG_SGI_GRU=m +# CONFIG_SGI_GRU_DEBUG is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +CONFIG_VMWARE_BALLOON=m +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +# CONFIG_SRAM is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_MISC_RTSX=m +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_ALTERA_STAPL=m +CONFIG_INTEL_MEI=m +CONFIG_INTEL_MEI_ME=m +# CONFIG_INTEL_MEI_TXE is not set +CONFIG_VMWARE_VMCI=m + +# +# Intel MIC & related support +# + +# +# Intel MIC Bus Driver +# +# CONFIG_INTEL_MIC_BUS is not set + +# +# SCIF Bus Driver +# +# CONFIG_SCIF_BUS is not set + +# +# VOP Bus Driver +# +# CONFIG_VOP_BUS is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +CONFIG_MISC_RTSX_PCI=m +CONFIG_MISC_RTSX_USB=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_MQ_DEFAULT=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +CONFIG_SCSI_AACRAID=m +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SMARTPQI=m +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_VMWARE_PVSCSI=m +# CONFIG_XEN_SCSI_FRONTEND is not set +CONFIG_HYPERV_STORAGE=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +CONFIG_FCOE_FNIC=m +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_ISCI is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA_FC=m +# CONFIG_TCM_QLA2XXX is not set +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_QEDI=m +CONFIG_QEDF=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=y +CONFIG_SCSI_DH_HP_SW=y +CONFIG_SCSI_DH_EMC=y +CONFIG_SCSI_DH_ALUA=y +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +CONFIG_SATA_MOBILE_LPM_POLICY=0 +CONFIG_SATA_AHCI_PLATFORM=m +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +CONFIG_ATA_PIIX=m +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +CONFIG_ATA_GENERIC=m +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +# CONFIG_MD_MULTIPATH is not set +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +# CONFIG_BCACHE is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +CONFIG_DM_DEBUG=y +CONFIG_DM_BUFIO=m +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_UNSTRIPED is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_SMQ=m +CONFIG_DM_WRITECACHE=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_FEC is not set +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_DM_INTEGRITY=m +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +# CONFIG_TCM_FC is not set +CONFIG_ISCSI_TARGET=m +CONFIG_ISCSI_TARGET_CXGB4=m +# CONFIG_SBP_TARGET is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +CONFIG_FUSION_LOGGING=y + +# +# IEEE 1394 (FireWire) support +# +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +# CONFIG_EQUALIZER is not set +CONFIG_NET_FC=y +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_IPVTAP=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +# CONFIG_GTP is not set +CONFIG_MACSEC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_VSOCKMON=m +# CONFIG_ARCNET is not set +# CONFIG_ATM_DRIVERS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_MDIO=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_ENA_ETHERNET=m +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=m +# CONFIG_AMD_XGBE_DCB is not set +CONFIG_AMD_XGBE_HAVE_ECC=y +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_AQTION=m +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_VENDOR_ATHEROS=y +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_TIGON3=m +CONFIG_TIGON3_HWMON=y +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +# CONFIG_SYSTEMPORT is not set +CONFIG_BNXT=m +CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_FLOWER_OFFLOAD=y +CONFIG_BNXT_DCB=y +CONFIG_BNXT_HWMON=y +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CADENCE=y +# CONFIG_MACB is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +CONFIG_CAVIUM_PTP=y +CONFIG_LIQUIDIO=m +CONFIG_LIQUIDIO_VF=m +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4=m +# CONFIG_CHELSIO_T4_DCB is not set +CONFIG_CHELSIO_T4VF=m +CONFIG_CHELSIO_LIB=m +CONFIG_NET_VENDOR_CISCO=y +CONFIG_ENIC=m +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_CX_ECAT is not set +CONFIG_DNET=m +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +CONFIG_DL2K=m +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +CONFIG_BE2NET=m +CONFIG_BE2NET_HWMON=y +# CONFIG_BE2NET_BE2 is not set +# CONFIG_BE2NET_BE3 is not set +CONFIG_BE2NET_LANCER=y +CONFIG_BE2NET_SKYHAWK=y +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_I825XX is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_E1000E_HWTS=y +CONFIG_IGB=m +CONFIG_IGB_HWMON=y +CONFIG_IGB_DCA=y +CONFIG_IGBVF=m +# CONFIG_IXGB is not set +CONFIG_IXGBE=m +CONFIG_IXGBE_HWMON=y +CONFIG_IXGBE_DCA=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_DCB=y +CONFIG_I40EVF=m +CONFIG_ICE=m +CONFIG_FM10K=m +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_EN_DCB=y +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX4_CORE_GEN2 is not set +CONFIG_MLX5_CORE=m +CONFIG_MLX5_ACCEL=y +CONFIG_MLX5_FPGA=y +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +CONFIG_MLX5_ESWITCH=y +CONFIG_MLX5_CORE_EN_DCB=y +CONFIG_MLX5_CORE_IPOIB=y +CONFIG_MLX5_EN_IPSEC=y +# CONFIG_MLX5_EN_TLS is not set +CONFIG_MLXSW_CORE=m +CONFIG_MLXSW_CORE_HWMON=y +CONFIG_MLXSW_CORE_THERMAL=y +CONFIG_MLXSW_PCI=m +CONFIG_MLXSW_I2C=m +CONFIG_MLXSW_SWITCHIB=m +CONFIG_MLXSW_SWITCHX2=m +CONFIG_MLXSW_SPECTRUM=m +CONFIG_MLXSW_SPECTRUM_DCB=y +CONFIG_MLXSW_MINIMAL=m +CONFIG_MLXFW=m +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +CONFIG_NET_VENDOR_MYRI=y +CONFIG_MYRI10GE=m +CONFIG_MYRI10GE_DCA=y +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_NET_VENDOR_NETERION=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NFP=m +CONFIG_NFP_APP_FLOWER=y +CONFIG_NFP_APP_ABM_NIC=y +# CONFIG_NFP_DEBUG is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +CONFIG_NET_VENDOR_OKI=y +CONFIG_ETHOC=m +CONFIG_NET_VENDOR_PACKET_ENGINES=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_QLA3XXX=m +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +CONFIG_NETXEN_NIC=m +CONFIG_QED=m +CONFIG_QED_LL2=y +CONFIG_QED_SRIOV=y +CONFIG_QEDE=m +CONFIG_QED_RDMA=y +CONFIG_QED_ISCSI=y +CONFIG_QED_FCOE=y +CONFIG_QED_OOO=y +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_ATP is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R8169=m +# CONFIG_NET_VENDOR_RENESAS is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_ROCKER=m +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_SFC=m +CONFIG_SFC_MTD=y +CONFIG_SFC_MCDI_MON=y +CONFIG_SFC_SRIOV=y +CONFIG_SFC_MCDI_LOGGING=y +# CONFIG_SFC_FALCON is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_CAVIUM=m +# CONFIG_MDIO_GPIO is not set +CONFIG_MDIO_MSCC_MIIM=m +CONFIG_MDIO_THUNDER=m +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +CONFIG_LED_TRIGGER_PHY=y + +# +# MII PHY device drivers +# +CONFIG_AMD_PHY=m +CONFIG_AQUANTIA_PHY=m +# CONFIG_AX88796B_PHY is not set +CONFIG_AT803X_PHY=m +CONFIG_BCM7XXX_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_BCM_NET_PHYLIB=m +CONFIG_BROADCOM_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_CORTINA_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_DP83822_PHY=m +CONFIG_DP83TC811_PHY=m +CONFIG_DP83848_PHY=m +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_ICPLUS_PHY=m +CONFIG_INTEL_XWAY_PHY=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_LXT_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MICREL_PHY=m +CONFIG_MICROCHIP_PHY=m +CONFIG_MICROCHIP_T1_PHY=m +CONFIG_MICROSEMI_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_RENESAS_PHY=m +CONFIG_ROCKCHIP_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_STE10XP=m +CONFIG_TERANETICS_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_XILINX_GMII2RGMII=m +CONFIG_MICREL_KS8995MA=m +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +# CONFIG_USB_NET_SR9800 is not set +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_WLAN=y +# CONFIG_WLAN_VENDOR_ADMTEK is not set +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_COMMON_DEBUG=y +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +CONFIG_ATH9K_AHB=y +CONFIG_ATH9K_DEBUGFS=y +# CONFIG_ATH9K_STATION_STATISTICS is not set +# CONFIG_ATH9K_DYNACK is not set +CONFIG_ATH9K_WOW=y +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +# CONFIG_ATH9K_HWRNG is not set +# CONFIG_ATH9K_COMMON_SPECTRAL is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_DEBUG is not set +CONFIG_ATH10K_DEBUGFS=y +# CONFIG_ATH10K_SPECTRAL is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_PROTO_MSGBUF=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +CONFIG_BRCMFMAC_PCIE=y +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +CONFIG_IWLDVM=m +CONFIG_IWLMVM=m +CONFIG_IWLWIFI_OPMODE_MODULAR=y +# CONFIG_IWLWIFI_BCAST_FILTERING is not set + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +CONFIG_IWLWIFI_DEBUGFS=y +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_MWIFIEX_USB=m +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_MT76_CORE=m +CONFIG_MT76_LEDS=y +CONFIG_MT76_USB=m +CONFIG_MT76x2_COMMON=m +CONFIG_MT76x0U=m +# CONFIG_MT76x2E is not set +CONFIG_MT76x2U=m +CONFIG_WLAN_VENDOR_RALINK=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +CONFIG_RT2800PCI=m +CONFIG_RT2800PCI_RT33XX=y +CONFIG_RT2800PCI_RT35XX=y +CONFIG_RT2800PCI_RT53XX=y +CONFIG_RT2800PCI_RT3290=y +# CONFIG_RT2500USB is not set +# CONFIG_RT73USB is not set +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RT2800_LIB=m +CONFIG_RT2800_LIB_MMIO=m +CONFIG_RT2X00_LIB_MMIO=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +CONFIG_RT2X00_LIB_DEBUGFS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +CONFIG_RTL8192DE=m +CONFIG_RTL8723AE=m +CONFIG_RTL8723BE=m +CONFIG_RTL8188EE=m +CONFIG_RTL8192EE=m +CONFIG_RTL8821AE=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_PCI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_RTL8723_COMMON=m +CONFIG_RTLBTCOEXIST=m +CONFIG_RTL8XXXU=m +# CONFIG_RTL8XXXU_UNTESTED is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +# CONFIG_QTNFMAC_PEARL_PCIE is not set +CONFIG_MAC80211_HWSIM=m +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +CONFIG_WAN=y +# CONFIG_LANMEDIA is not set +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300TOO is not set +# CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +# CONFIG_SBNI is not set +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKELB=m +# CONFIG_IEEE802154_AT86RF230 is not set +# CONFIG_IEEE802154_MRF24J40 is not set +# CONFIG_IEEE802154_CC2520 is not set +# CONFIG_IEEE802154_ATUSB is not set +# CONFIG_IEEE802154_ADF7242 is not set +# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_IEEE802154_MCR20A is not set +# CONFIG_IEEE802154_HWSIM is not set +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_VMXNET3=m +CONFIG_FUJITSU_ES=m +CONFIG_THUNDERBOLT_NET=m +CONFIG_HYPERV_NET=m +CONFIG_NETDEVSIM=m +CONFIG_NET_FAILOVER=m +CONFIG_ISDN=y +CONFIG_ISDN_I4L=m +CONFIG_ISDN_PPP=y +CONFIG_ISDN_PPP_VJ=y +CONFIG_ISDN_MPP=y +CONFIG_IPPP_FILTER=y +# CONFIG_ISDN_PPP_BSDCOMP is not set +CONFIG_ISDN_AUDIO=y +CONFIG_ISDN_TTY_FAX=y + +# +# ISDN feature submodules +# +CONFIG_ISDN_DIVERSION=m + +# +# ISDN4Linux hardware drivers +# + +# +# Passive cards +# +CONFIG_ISDN_DRV_HISAX=m + +# +# D-channel protocol features +# +CONFIG_HISAX_EURO=y +CONFIG_DE_AOC=y +CONFIG_HISAX_NO_SENDCOMPLETE=y +CONFIG_HISAX_NO_LLC=y +CONFIG_HISAX_NO_KEYPAD=y +CONFIG_HISAX_1TR6=y +CONFIG_HISAX_NI1=y +CONFIG_HISAX_MAX_CARDS=8 + +# +# HiSax supported cards +# +CONFIG_HISAX_16_3=y +CONFIG_HISAX_TELESPCI=y +CONFIG_HISAX_S0BOX=y +CONFIG_HISAX_FRITZPCI=y +CONFIG_HISAX_AVM_A1_PCMCIA=y +CONFIG_HISAX_ELSA=y +CONFIG_HISAX_DIEHLDIVA=y +CONFIG_HISAX_SEDLBAUER=y +CONFIG_HISAX_NETJET=y +CONFIG_HISAX_NETJET_U=y +CONFIG_HISAX_NICCY=y +CONFIG_HISAX_BKM_A4T=y +CONFIG_HISAX_SCT_QUADRO=y +CONFIG_HISAX_GAZEL=y +CONFIG_HISAX_HFC_PCI=y +CONFIG_HISAX_W6692=y +CONFIG_HISAX_HFC_SX=y +CONFIG_HISAX_ENTERNOW_PCI=y +# CONFIG_HISAX_DEBUG is not set + +# +# HiSax PCMCIA card service modules +# + +# +# HiSax sub driver modules +# +CONFIG_HISAX_ST5481=m +# CONFIG_HISAX_HFCUSB is not set +CONFIG_HISAX_HFC4S8S=m +CONFIG_HISAX_FRITZ_PCIPNP=m +CONFIG_ISDN_CAPI=m +# CONFIG_CAPI_TRACE is not set +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_MIDDLEWARE=y +CONFIG_ISDN_CAPI_CAPIDRV=m +CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE=y + +# +# CAPI hardware drivers +# +CONFIG_CAPI_AVM=y +CONFIG_ISDN_DRV_AVMB1_B1PCI=m +CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y +CONFIG_ISDN_DRV_AVMB1_T1PCI=m +CONFIG_ISDN_DRV_AVMB1_C4=m +# CONFIG_CAPI_EICON is not set +CONFIG_ISDN_DRV_GIGASET=m +CONFIG_GIGASET_CAPI=y +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +CONFIG_GIGASET_M101=m +# CONFIG_GIGASET_DEBUG is not set +CONFIG_HYSDN=m +CONFIG_HYSDN_CAPI=y +CONFIG_MISDN=m +CONFIG_MISDN_DSP=m +CONFIG_MISDN_L1OIP=m + +# +# mISDN hardware drivers +# +CONFIG_MISDN_HFCPCI=m +CONFIG_MISDN_HFCMULTI=m +CONFIG_MISDN_HFCUSB=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m +CONFIG_ISDN_HDLC=m +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_VMMOUSE=y +CONFIG_MOUSE_PS2_SMBUS=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +CONFIG_MOUSE_ELAN_I2C_SMBUS=y +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +# CONFIG_TABLET_USB_HANWANG is not set +CONFIG_TABLET_USB_KBTAB=m +# CONFIG_TABLET_USB_PEGASUS is not set +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2004 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_STMFTS is not set +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set +# CONFIG_TOUCHSCREEN_SX8654 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZET6223 is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_MMA8450 is not set +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_GP2A=m +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m +# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_SPI=m +CONFIG_RMI4_SMB=m +CONFIG_RMI4_F03=y +CONFIG_RMI4_F03_SERIO=m +CONFIG_RMI4_2D_SENSOR=y +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y +CONFIG_RMI4_F30=y +CONFIG_RMI4_F34=y +# CONFIG_RMI4_F54 is not set +CONFIG_RMI4_F55=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +CONFIG_SERIO_ARC_PS2=m +CONFIG_HYPERV_KEYBOARD=m +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_NOZOMI=m +# CONFIG_ISI is not set +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_LPSS=y +CONFIG_SERIAL_8250_MID=y +# CONFIG_SERIAL_8250_MOXA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +CONFIG_SERIAL_JSM=m +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_ARC=m +CONFIG_SERIAL_ARC_NR_PORTS=1 +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_DEV_BUS is not set +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PANIC_EVENT=y +CONFIG_IPMI_PANIC_STRING=y +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_SSIF=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_NVRAM=y +# CONFIG_APPLICOM is not set +# CONFIG_MWAVE is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP_DEFAULT is not set +CONFIG_HANGCHECK_TIMER=m +CONFIG_UV_MMTIMER=m +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +CONFIG_TCG_TIS_CORE=y +CONFIG_TCG_TIS=y +# CONFIG_TCG_TIS_SPI is not set +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m +# CONFIG_TCG_XEN is not set +CONFIG_TCG_CRB=y +# CONFIG_TCG_VTPM_PROXY is not set +CONFIG_TCG_TIS_ST33ZP24=m +CONFIG_TCG_TIS_ST33ZP24_I2C=m +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +CONFIG_TELCLOCK=m +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set +# CONFIG_RANDOM_TRUST_CPU is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=m + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_REG is not set +CONFIG_I2C_MUX_MLXCPLD=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_SMBUS=m +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=m +CONFIG_I2C_ISCH=m +CONFIG_I2C_ISMT=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m + +# +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +CONFIG_I2C_DESIGNWARE_BAYTRAIL=y +# CONFIG_I2C_EMEV2 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_MLXCPLD=m +CONFIG_I2C_STUB=m +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +CONFIG_PTP_1588_CLOCK_KVM=m +CONFIG_PINCTRL=y +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AMD=m +# CONFIG_PINCTRL_MCP23S08 is not set +# CONFIG_PINCTRL_SX150X is not set +CONFIG_PINCTRL_BAYTRAIL=y +# CONFIG_PINCTRL_CHERRYVIEW is not set +CONFIG_PINCTRL_INTEL=m +CONFIG_PINCTRL_BROXTON=m +CONFIG_PINCTRL_CANNONLAKE=m +CONFIG_PINCTRL_CEDARFORK=m +CONFIG_PINCTRL_DENVERTON=m +CONFIG_PINCTRL_GEMINILAKE=m +CONFIG_PINCTRL_ICELAKE=m +CONFIG_PINCTRL_LEWISBURG=m +CONFIG_PINCTRL_SUNRISEPOINT=m +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=m + +# +# Memory mapped GPIO drivers +# +CONFIG_GPIO_AMDPT=m +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_GENERIC_PLATFORM is not set +CONFIG_GPIO_ICH=m +# CONFIG_GPIO_LYNXPOINT is not set +# CONFIG_GPIO_MB86S7X is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_VX855 is not set + +# +# Port-mapped I/O GPIO drivers +# +# CONFIG_GPIO_F7188X is not set +# CONFIG_GPIO_IT87 is not set +# CONFIG_GPIO_SCH is not set +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_WINBOND is not set +# CONFIG_GPIO_WS16C48 is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set + +# +# MFD GPIO expanders +# + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +# CONFIG_W1 is not set +# CONFIG_POWER_AVS is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set +# CONFIG_BATTERY_BQ27XXX is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_LTC3651 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +CONFIG_CHARGER_SMB347=m +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +# CONFIG_SENSORS_ADT7310 is not set +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m +CONFIG_SENSORS_FAM15H_POWER=m +CONFIG_SENSORS_APPLESMC=m +CONFIG_SENSORS_ASB100=m +# CONFIG_SENSORS_ASPEED is not set +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DELL_SMM=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_FSCHMD=m +# CONFIG_SENSORS_FTSTEUTATES is not set +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_HIH6130 is not set +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +# CONFIG_SENSORS_IIO_HWMON is not set +CONFIG_SENSORS_I5500=m +CONFIG_SENSORS_CORETEMP=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +# CONFIG_SENSORS_POWR1220 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +# CONFIG_SENSORS_LTC4222 is not set +CONFIG_SENSORS_LTC4245=m +# CONFIG_SENSORS_LTC4260 is not set +CONFIG_SENSORS_LTC4261=m +# CONFIG_SENSORS_MAX1111 is not set +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +# CONFIG_SENSORS_MAX31790 is not set +CONFIG_SENSORS_MCP3021=m +# CONFIG_SENSORS_MLXREG_FAN is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +CONFIG_SENSORS_LM63=m +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NCT6683 is not set +CONFIG_SENSORS_NCT6775=m +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +# CONFIG_SENSORS_IBM_CFFPS is not set +# CONFIG_SENSORS_IR35221 is not set +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +# CONFIG_SENSORS_LTC3815 is not set +CONFIG_SENSORS_MAX16064=m +# CONFIG_SENSORS_MAX20751 is not set +# CONFIG_SENSORS_MAX31785 is not set +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +# CONFIG_SENSORS_TPS40422 is not set +# CONFIG_SENSORS_TPS53679 is not set +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +# CONFIG_SENSORS_EMC2103 is not set +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +# CONFIG_SENSORS_ADS7871 is not set +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83773G is not set +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +# CONFIG_SENSORS_XGENE is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_SENSORS_ATK0110=m +CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +CONFIG_THERMAL_GOV_USER_SPACE=y +# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_EMULATION is not set +CONFIG_INTEL_POWERCLAMP=m +CONFIG_X86_PKG_TEMP_THERMAL=m +CONFIG_INTEL_SOC_DTS_IOSF_CORE=m +# CONFIG_INTEL_SOC_DTS_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_INT340X_THERMAL=m +CONFIG_ACPI_THERMAL_REL=m +# CONFIG_INT3406_THERMAL is not set +CONFIG_INTEL_PCH_THERMAL=m +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_SYSFS=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WDAT_WDT=m +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +# CONFIG_EBC_C384_WDT is not set +CONFIG_F71808E_WDT=m +CONFIG_SP5100_TCO=m +CONFIG_SBC_FITPC2_WATCHDOG=m +# CONFIG_EUROTECH_WDT is not set +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +# CONFIG_WAFER_WDT is not set +CONFIG_I6300ESB_WDT=m +CONFIG_IE6XX_WDT=m +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_HPWDT_NMI_DECODING=y +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +CONFIG_NV_TCO=m +# CONFIG_60XX_WDT is not set +# CONFIG_CPU5_WDT is not set +CONFIG_SMSC_SCH311X_WDT=m +# CONFIG_SMSC37B787_WDT is not set +CONFIG_VIA_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +CONFIG_INTEL_MEI_WDT=m +# CONFIG_NI903X_WDT is not set +# CONFIG_NIC7018_WDT is not set +# CONFIG_MEN_A21_WDT is not set +CONFIG_XEN_WDT=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_BCMA=m +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_BD9571MWV is not set +# CONFIG_MFD_AXP20X_I2C is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set +CONFIG_LPC_ICH=m +CONFIG_LPC_SCH=m +# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set +CONFIG_MFD_INTEL_LPSS=y +CONFIG_MFD_INTEL_LPSS_ACPI=y +CONFIG_MFD_INTEL_LPSS_PCI=y +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +CONFIG_MFD_SM501=m +CONFIG_MFD_SM501_GPIO=y +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_SYSCON is not set +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +CONFIG_MFD_VX855=m +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_REGULATOR is not set +CONFIG_CEC_CORE=y +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +CONFIG_LIRC=y +CONFIG_RC_DECODERS=y +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +# CONFIG_IR_SHARP_DECODER is not set +CONFIG_IR_MCE_KBD_DECODER=m +# CONFIG_IR_XMP_DECODER is not set +CONFIG_IR_IMON_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_ENE=m +CONFIG_IR_IMON=m +CONFIG_IR_IMON_RAW=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_ITE_CIR=m +CONFIG_IR_FINTEK=m +CONFIG_IR_NUVOTON=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_WINBOND_CIR=m +# CONFIG_IR_IGORPLUGUSB is not set +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +# CONFIG_RC_LOOPBACK is not set +CONFIG_IR_SERIAL=m +CONFIG_IR_SERIAL_TRANSMITTER=y +CONFIG_IR_SIR=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +# CONFIG_MEDIA_SDR_SUPPORT is not set +CONFIG_MEDIA_CEC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2=m +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_DVB_CORE=m +# CONFIG_DVB_MMAP is not set +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set + +# +# Media drivers +# +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +# CONFIG_USB_GSPCA_DTCS033 is not set +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +# CONFIG_USB_GSPCA_KINECT is not set +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +# CONFIG_USB_GSPCA_STK1135 is not set +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TOUPTEK is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +# CONFIG_VIDEO_USBTV is not set + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +# CONFIG_VIDEO_AU0828_RC is not set +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_DIB3000MC=m +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +# CONFIG_DVB_USB_DVBSKY is not set +# CONFIG_DVB_USB_ZD1301 is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +# CONFIG_VIDEO_EM28XX_V4L2 is not set +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# USB HDMI CEC adapters +# +CONFIG_USB_PULSE8_CEC=m +CONFIG_USB_RAINSHADOW_CEC=m +CONFIG_MEDIA_PCI_SUPPORT=y + +# +# Media capture support +# +# CONFIG_VIDEO_MEYE is not set +# CONFIG_VIDEO_SOLO6X10 is not set +# CONFIG_VIDEO_TW5864 is not set +# CONFIG_VIDEO_TW68 is not set +# CONFIG_VIDEO_TW686X is not set + +# +# Media capture/analog TV support +# +CONFIG_VIDEO_IVTV=m +# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set +# CONFIG_VIDEO_IVTV_ALSA is not set +CONFIG_VIDEO_FB_IVTV=m +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DT3155 is not set + +# +# Media capture/analog/hybrid TV support +# +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +# CONFIG_VIDEO_CX25821 is not set +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_RC=y +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m + +# +# Media digital TV PCI Adapters +# +CONFIG_DVB_AV7110_IR=y +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +# CONFIG_DVB_PT3 is not set +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set +# CONFIG_DVB_SMIPCIE is not set +# CONFIG_DVB_NETUP_UNIDVB is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set +CONFIG_CEC_PLATFORM_DRIVERS=y + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +# CONFIG_RADIO_SI470X is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_MR800 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_SHARK is not set +# CONFIG_RADIO_SHARK2 is not set +# CONFIG_USB_KEENE is not set +# CONFIG_USB_RAREMONO is not set +# CONFIG_USB_MA901 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# + +# +# Supported FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_INPUT=y +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS3308=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m + +# +# Camera sensor devices +# + +# +# Flash devices +# + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# SDR tuner chips +# + +# +# Miscellaneous helper chips +# +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA18250=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m +CONFIG_MEDIA_TUNER_QM1D1B0004=m + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV0910=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_STV6111=m +CONFIG_DVB_MXL5XX=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +CONFIG_DVB_GP8PSK_FE=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Common Interface (EN50221) controller drivers +# +CONFIG_DVB_CXD2099=m + +# +# Tools to develop new frontends +# +CONFIG_DVB_DUMMY_FE=m + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_INTEL_GTT=m +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=64 +CONFIG_VGA_SWITCHEROO=y +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_DP_AUX_CHARDEV=y +# CONFIG_DRM_DEBUG_SELFTEST is not set +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_DP_CEC=y +CONFIG_DRM_TTM=m +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +CONFIG_DRM_RADEON=m +CONFIG_DRM_RADEON_USERPTR=y +CONFIG_DRM_AMDGPU=m +# CONFIG_DRM_AMDGPU_SI is not set +# CONFIG_DRM_AMDGPU_CIK is not set +# CONFIG_DRM_AMDGPU_USERPTR is not set +# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_AMD_ACP=y + +# +# Display Engine Configuration +# +CONFIG_DRM_AMD_DC=y +CONFIG_DRM_AMD_DC_DCN1_0=y +# CONFIG_DEBUG_KERNEL_DC is not set + +# +# AMD Library routines +# +CONFIG_CHASH=m +# CONFIG_CHASH_STATS is not set +# CONFIG_CHASH_SELFTEST is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +# CONFIG_NOUVEAU_DEBUG_MMU is not set +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_I915=m +# CONFIG_DRM_I915_ALPHA_SUPPORT is not set +CONFIG_DRM_I915_CAPTURE_ERROR=y +CONFIG_DRM_I915_COMPRESS_ERROR=y +CONFIG_DRM_I915_USERPTR=y +CONFIG_DRM_I915_GVT=y +CONFIG_DRM_I915_GVT_KVMGT=m +# CONFIG_DRM_VGEM is not set +CONFIG_DRM_VKMS=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_VMWGFX_FBCON=y +CONFIG_DRM_GMA500=m +CONFIG_DRM_GMA600=y +CONFIG_DRM_GMA3600=y +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +CONFIG_HSA_AMD=m +# CONFIG_DRM_HISI_HIBMC is not set +# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_XEN is not set +# CONFIG_DRM_LEGACY is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y + +# +# Frame buffer Devices +# +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_BACKLIGHT=y +# CONFIG_FB_MODE_HELPERS is not set +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_VESA=y +CONFIG_FB_EFI=y +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_XEN_FBDEV_FRONTEND is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_HYPERV=m +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=m +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_OTM3225A is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_PWM is not set +CONFIG_BACKLIGHT_APPLE=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_PCM_ELD=y +CONFIG_SND_HWDEP=m +CONFIG_SND_SEQ_DEVICE=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=m +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_SEQUENCER_OSS=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_SEQ_MIDI_EVENT=m +CONFIG_SND_SEQ_MIDI=m +CONFIG_SND_SEQ_MIDI_EMUL=m +CONFIG_SND_SEQ_VIRMIDI=m +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_OPL3_LIB_SEQ=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_PCSP=m +CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_SERIAL_U16550 is not set +CONFIG_SND_MPU401=m +# CONFIG_SND_PORTMAN2X4 is not set +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5 +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +CONFIG_SND_ALI5451=m +CONFIG_SND_ASIHPI=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +# CONFIG_SND_CS4281 is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1_SEQ=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +# CONFIG_SND_ES1938 is not set +CONFIG_SND_ES1968=m +CONFIG_SND_ES1968_INPUT=y +CONFIG_SND_ES1968_RADIO=y +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +CONFIG_SND_LOLA=m +CONFIG_SND_LX6464ES=m +CONFIG_SND_MAESTRO3=m +CONFIG_SND_MAESTRO3_INPUT=y +CONFIG_SND_MIXART=m +# CONFIG_SND_NM256 is not set +CONFIG_SND_PCXHR=m +# CONFIG_SND_RIPTIDE is not set +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +# CONFIG_SND_SONICVIBES is not set +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +CONFIG_SND_HDA=m +CONFIG_SND_HDA_INTEL=m +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_RECONFIG=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_BEEP_MODE=0 +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_HDA_GENERIC=m +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_CORE=m +CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_COMPONENT=y +CONFIG_SND_HDA_I915=y +CONFIG_SND_HDA_EXT_CORE=m +CONFIG_SND_HDA_PREALLOC_SIZE=512 +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_US122L=m +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_FIREWIRE=y +CONFIG_SND_FIREWIRE_LIB=m +CONFIG_SND_DICE=m +CONFIG_SND_OXFW=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m +CONFIG_SND_FIREWIRE_DIGI00X=m +CONFIG_SND_FIREWIRE_TASCAM=m +CONFIG_SND_FIREWIRE_MOTU=m +CONFIG_SND_FIREFACE=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_COMPRESS=y +CONFIG_SND_SOC_TOPOLOGY=y +CONFIG_SND_SOC_ACPI=m +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_SOC_IMG is not set +CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y +CONFIG_SND_SST_IPC=m +CONFIG_SND_SST_IPC_ACPI=m +CONFIG_SND_SOC_INTEL_SST_ACPI=m +CONFIG_SND_SOC_INTEL_SST=m +CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m +CONFIG_SND_SOC_INTEL_HASWELL=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m +# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m +CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m +CONFIG_SND_SOC_INTEL_SKYLAKE=m +CONFIG_SND_SOC_ACPI_INTEL_MATCH=m +CONFIG_SND_SOC_INTEL_MACH=y +# CONFIG_SND_SOC_INTEL_HASWELL_MACH is not set +# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set +# CONFIG_SND_SOC_INTEL_BROADWELL_MACH is not set +CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m +CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m +# CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set + +# +# STMicroelectronics STM32 SOC audio support +# +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_ZX_TDM is not set +CONFIG_SND_SOC_I2C_AND_SPI=m + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_DA7213=m +CONFIG_SND_SOC_DA7219=m +CONFIG_SND_SOC_DMIC=m +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +CONFIG_SND_SOC_ES8316=m +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_GTM601 is not set +CONFIG_SND_SOC_HDAC_HDMI=m +# CONFIG_SND_SOC_INNO_RK3036 is not set +CONFIG_SND_SOC_MAX98090=m +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9867 is not set +CONFIG_SND_SOC_MAX98927=m +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +CONFIG_SND_SOC_RL6231=m +CONFIG_SND_SOC_RL6347A=m +CONFIG_SND_SOC_RT286=m +CONFIG_SND_SOC_RT298=m +CONFIG_SND_SOC_RT5514=m +CONFIG_SND_SOC_RT5514_SPI=m +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +CONFIG_SND_SOC_RT5640=m +CONFIG_SND_SOC_RT5645=m +CONFIG_SND_SOC_RT5651=m +CONFIG_SND_SOC_RT5663=m +CONFIG_SND_SOC_RT5670=m +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +CONFIG_SND_SOC_SSM4567=m +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +CONFIG_SND_SOC_TS3A227E=m +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +CONFIG_SND_SOC_NAU8824=m +CONFIG_SND_SOC_NAU8825=m +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SIMPLE_CARD is not set +CONFIG_SND_X86=y +CONFIG_HDMI_LPE_AUDIO=m +CONFIG_SND_SYNTH_EMUX=m +CONFIG_SND_XEN_FRONTEND=m +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=m +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +# CONFIG_HID_ACCUTOUCH is not set +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +CONFIG_HID_APPLE=m +CONFIG_HID_APPLEIR=m +CONFIG_HID_ASUS=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CORSAIR=m +# CONFIG_HID_COUGAR is not set +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CMEDIA=m +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EMS_FF is not set +CONFIG_HID_ELAN=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +# CONFIG_HOLTEK_FF is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_ITE=m +CONFIG_HID_JABRA=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LED=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m +CONFIG_HID_LOGITECH_HIDPP=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +CONFIG_HID_MAGICMOUSE=y +# CONFIG_HID_MAYFLASH is not set +# CONFIG_HID_REDRAGON is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTI=m +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +# CONFIG_HID_RETRODE is not set +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +# CONFIG_HID_STEAM is not set +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_HYPERV_MOUSE=m +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_HID_UDRAW_PS3 is not set +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +# CONFIG_ZEROPLUS_FF is not set +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=y +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_ALPS=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +CONFIG_I2C_HID=m + +# +# Intel ISH HID support +# +CONFIG_INTEL_ISH_HID=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_PCI=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_LEDS_TRIGGER_USBPORT=m +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DBGCAP=y +CONFIG_USB_XHCI_PCI=y +# CONFIG_USB_XHCI_PLATFORM is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_SIMPLE is not set +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +# CONFIG_USB_SERIAL_F81232 is not set +CONFIG_USB_SERIAL_F8153X=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_METRO is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +# CONFIG_USB_SERIAL_WISHBONE is not set +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_UPD78F0730=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set +CONFIG_USB_IOWARRIOR=m +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +CONFIG_USB_ISIGHTFW=m +# CONFIG_USB_YUREX is not set +CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_HUB_USB251XB is not set +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m + +# +# USB Physical Layer drivers +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +# CONFIG_USB_GADGET is not set +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +CONFIG_TYPEC_RT1711H=y +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_UCSI=y +CONFIG_UCSI_ACPI=y +CONFIG_TYPEC_TPS6598X=m + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +CONFIG_TYPEC_MUX_PI3USB30532=m + +# +# USB Type-C Alternate Mode drivers +# +CONFIG_TYPEC_DP_ALTMODE=y +CONFIG_USB_ROLE_SWITCH=y +CONFIG_USB_ROLES_INTEL_XHCI=y +CONFIG_USB_LED_TRIG=y +# CONFIG_USB_ULPI_BUS is not set +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=m +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI_ACPI=m +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_TIFM_SD=m +# CONFIG_MMC_SPI is not set +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_CQHCI=m +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_SDHCI_XENON is not set +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +# CONFIG_MS_BLOCK is not set + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set + +# +# LED drivers +# +# CONFIG_LEDS_APU is not set +CONFIG_LEDS_LM3530=m +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=m +# CONFIG_LEDS_LP3952 is not set +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +# CONFIG_LEDS_LP8501 is not set +CONFIG_LEDS_CLEVO_MAIL=m +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +CONFIG_LEDS_BLINKM=m +CONFIG_LEDS_MLXCPLD=m +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LEDS_NIC78BX is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_DISK=y +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_CPU is not set +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ON_DEMAND_PAGING=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y +# CONFIG_INFINIBAND_MTHCA is not set +# CONFIG_INFINIBAND_QIB is not set +CONFIG_INFINIBAND_CXGB4=m +CONFIG_INFINIBAND_I40IW=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +# CONFIG_INFINIBAND_NES is not set +# CONFIG_INFINIBAND_OCRDMA is not set +CONFIG_INFINIBAND_VMWARE_PVRDMA=m +CONFIG_INFINIBAND_USNIC=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_INFINIBAND_OPA_VNIC=m +CONFIG_INFINIBAND_RDMAVT=m +CONFIG_RDMA_RXE=m +CONFIG_INFINIBAND_HFI1=m +# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set +# CONFIG_SDMA_VERBOSITY is not set +CONFIG_INFINIBAND_QEDR=m +CONFIG_INFINIBAND_BNXT_RE=m +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=m +CONFIG_EDAC_GHES=y +CONFIG_EDAC_AMD64=m +# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set +CONFIG_EDAC_E752X=m +CONFIG_EDAC_I82975X=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I3200=m +CONFIG_EDAC_IE31200=m +CONFIG_EDAC_X38=m +CONFIG_EDAC_I5400=m +CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I5000=m +CONFIG_EDAC_I5100=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_SBRIDGE=m +CONFIG_EDAC_SKX=m +CONFIG_EDAC_PND2=m +CONFIG_RTC_LIB=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_SYSTOHC is not set +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1307_CENTURY is not set +CONFIG_RTC_DRV_DS1374=m +# CONFIG_RTC_DRV_DS1374_WDT is not set +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8523=m +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_FM3130=m +# CONFIG_RTC_DRV_RX8010 is not set +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +# CONFIG_RTC_DRV_RV8803 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RX4581=m +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_DS3232_HWMON=y +# CONFIG_RTC_DRV_PCF2127 is not set +CONFIG_RTC_DRV_RV3029C2=m +# CONFIG_RTC_DRV_RV3029_HWMON is not set + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_STK17TA8=m +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_FTRTC010 is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +# CONFIG_ALTERA_MSGDMA is not set +CONFIG_INTEL_IDMA64=m +CONFIG_INTEL_IOATDMA=m +# CONFIG_QCOM_HIDMA_MGMT is not set +# CONFIG_QCOM_HIDMA is not set +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=m +CONFIG_DW_DMAC_PCI=y +CONFIG_HSU_DMA=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +CONFIG_DCA=m +# CONFIG_AUXDISPLAY is not set +# CONFIG_PANEL is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_DMEM_GENIRQ is not set +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +# CONFIG_UIO_NETX is not set +# CONFIG_UIO_PRUSS is not set +# CONFIG_UIO_MF624 is not set +CONFIG_UIO_HV_GENERIC=m +CONFIG_VFIO_IOMMU_TYPE1=m +CONFIG_VFIO_VIRQFD=m +CONFIG_VFIO=m +CONFIG_VFIO_NOIOMMU=y +CONFIG_VFIO_PCI=m +# CONFIG_VFIO_PCI_VGA is not set +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PCI_IGD is not set +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m +CONFIG_IRQ_BYPASS_MANAGER=m +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_MENU=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_HYPERV=m +CONFIG_HYPERV_TSCPAGE=y +CONFIG_HYPERV_UTILS=m +CONFIG_HYPERV_BALLOON=m + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +# CONFIG_XEN_SELFBALLOONING is not set +# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_TMEM=m +# CONFIG_XEN_PVCALLS_FRONTEND is not set +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +CONFIG_XEN_ACPI=y +# CONFIG_STAGING is not set +CONFIG_X86_PLATFORM_DEVICES=y +CONFIG_ACER_WMI=m +# CONFIG_ACER_WIRELESS is not set +CONFIG_ACERHDF=m +# CONFIG_ALIENWARE_WMI is not set +CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_SMBIOS=m +CONFIG_DELL_SMBIOS_WMI=y +# CONFIG_DELL_SMBIOS_SMM is not set +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m +CONFIG_DELL_WMI_DESCRIPTOR=m +CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_WMI_LED=m +CONFIG_DELL_SMO8800=m +CONFIG_DELL_RBTN=m +CONFIG_FUJITSU_LAPTOP=m +CONFIG_FUJITSU_TABLET=m +CONFIG_AMILO_RFKILL=m +# CONFIG_GPD_POCKET_FAN is not set +CONFIG_HP_ACCEL=m +CONFIG_HP_WIRELESS=m +CONFIG_HP_WMI=m +CONFIG_MSI_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_IDEAPAD_LAPTOP=m +# CONFIG_SURFACE3_WMI is not set +CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y +# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set +# CONFIG_THINKPAD_ACPI_DEBUG is not set +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set +CONFIG_THINKPAD_ACPI_VIDEO=y +CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y +CONFIG_SENSORS_HDAPS=m +# CONFIG_INTEL_MENLOW is not set +CONFIG_EEEPC_LAPTOP=m +CONFIG_ASUS_WMI=m +CONFIG_ASUS_NB_WMI=m +CONFIG_EEEPC_WMI=m +# CONFIG_ASUS_WIRELESS is not set +CONFIG_ACPI_WMI=m +CONFIG_WMI_BMOF=m +CONFIG_INTEL_WMI_THUNDERBOLT=m +CONFIG_MSI_WMI=m +# CONFIG_PEAQ_WMI is not set +CONFIG_TOPSTAR_LAPTOP=m +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_TOSHIBA_BT_RFKILL=m +# CONFIG_TOSHIBA_HAPS is not set +# CONFIG_TOSHIBA_WMI is not set +CONFIG_ACPI_CMPC=m +# CONFIG_INTEL_INT0002_VGPIO is not set +CONFIG_INTEL_HID_EVENT=m +CONFIG_INTEL_VBTN=m +CONFIG_INTEL_IPS=m +CONFIG_INTEL_PMC_CORE=m +# CONFIG_IBM_RTL is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_MXM_WMI=m +CONFIG_INTEL_OAKTRAIL=m +CONFIG_SAMSUNG_Q10=m +CONFIG_APPLE_GMUX=m +CONFIG_INTEL_RST=m +# CONFIG_INTEL_SMARTCONNECT is not set +CONFIG_PVPANIC=y +# CONFIG_INTEL_PMC_IPC is not set +# CONFIG_SURFACE_PRO3_BUTTON is not set +# CONFIG_INTEL_PUNIT_IPC is not set +CONFIG_MLX_PLATFORM=m +CONFIG_INTEL_TURBO_MAX_3=y +# CONFIG_I2C_MULTI_INSTANTIATE is not set +# CONFIG_INTEL_ATOMISP2_PM is not set +CONFIG_PMC_ATOM=y +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_MELLANOX_PLATFORM=y +CONFIG_MLXREG_HOTPLUG=m +# CONFIG_MLXREG_IO is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CS2000_CP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_HWSPINLOCK=y + +# +# Clock Source drivers +# +CONFIG_CLKEVT_I8253=y +CONFIG_I8253_LOCK=y +CONFIG_CLKBLD_I8253=y +CONFIG_MAILBOX=y +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# + +# +# Generic PASID table support +# +# CONFIG_IOMMU_DEBUGFS is not set +CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y +CONFIG_IOMMU_IOVA=y +CONFIG_AMD_IOMMU=y +CONFIG_AMD_IOMMU_V2=m +CONFIG_DMAR_TABLE=y +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_SVM is not set +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_IRQ_REMAP=y +# CONFIG_SMMU_BYPASS_DEV is not set + +# +# Remoteproc drivers +# +# CONFIG_REMOTEPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +# CONFIG_RPMSG_VIRTIO is not set +# CONFIG_SOUNDWIRE is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Amlogic SoC drivers +# + +# +# Broadcom SoC drivers +# + +# +# NXP/Freescale QorIQ SoC drivers +# + +# +# i.MX SoC drivers +# + +# +# Qualcomm SoC drivers +# +# CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +CONFIG_SOC_HISILICON_LBC=m +CONFIG_SOC_HISILICON_SYSCTL=m +# CONFIG_PM_DEVFREQ is not set +# CONFIG_EXTCON is not set +# CONFIG_MEMORY is not set +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +CONFIG_HID_SENSOR_ACCEL_3D=m +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_SCA3000 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_HI8435 is not set +# CONFIG_HX711 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2497 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX9611 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_NAU7802 is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_VIPERBOARD_ADC is not set + +# +# Analog Front Ends +# + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Counters +# + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_LTC2632 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_DS4424 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +CONFIG_HID_SENSOR_GYRO_3D=m +# CONFIG_MPU3050_I2C is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +CONFIG_HID_SENSOR_HUMIDITY=m +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_ISL29125 is not set +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Multiplexers +# + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set + +# +# Digital potentiometers +# +# CONFIG_AD5272 is not set +# CONFIG_DS1803 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Digital potentiostats +# +# CONFIG_LMP91000 is not set + +# +# Pressure sensors +# +# CONFIG_ABP060MG is not set +# CONFIG_BMP280 is not set +CONFIG_HID_SENSOR_PRESS=m +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity and distance sensors +# +# CONFIG_ISL29501 is not set +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +# CONFIG_SX9500 is not set +# CONFIG_SRF08 is not set + +# +# Resolver to digital converters +# +# CONFIG_AD2S1200 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +CONFIG_HID_SENSOR_TEMP=m +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +CONFIG_NTB=m +# CONFIG_NTB_AMD is not set +# CONFIG_NTB_IDT is not set +# CONFIG_NTB_INTEL is not set +# CONFIG_NTB_SWITCHTEC is not set +# CONFIG_NTB_PINGPONG is not set +# CONFIG_NTB_TOOL is not set +# CONFIG_NTB_PERF is not set +# CONFIG_NTB_TRANSPORT is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_PWM_LPSS=m +CONFIG_PWM_LPSS_PCI=m +CONFIG_PWM_LPSS_PLATFORM=m +# CONFIG_PWM_PCA9685 is not set + +# +# IRQ chip support +# +CONFIG_ARM_GIC_MAX_NR=1 +# CONFIG_IPACK_BUS is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +# CONFIG_GENERIC_PHY is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_CPCAP_USB is not set +CONFIG_POWERCAP=y +CONFIG_INTEL_RAPL=m +# CONFIG_IDLE_INJECT is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_RAS=y +# CONFIG_RAS_CEC is not set +CONFIG_THUNDERBOLT=y + +# +# Android +# +# CONFIG_ANDROID is not set +CONFIG_LIBNVDIMM=m +CONFIG_BLK_DEV_PMEM=m +CONFIG_ND_BLK=m +CONFIG_ND_CLAIM=y +CONFIG_ND_BTT=m +CONFIG_BTT=y +CONFIG_ND_PFN=m +CONFIG_NVDIMM_PFN=y +CONFIG_NVDIMM_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_DAX=y +CONFIG_DEV_DAX=m +CONFIG_DEV_DAX_PMEM=m +CONFIG_NVMEM=y + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# CONFIG_FPGA is not set +# CONFIG_UNISYS_VISORBUS is not set +# CONFIG_SIOX is not set +# CONFIG_UACCE is not set +# CONFIG_SLIMBUS is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_FS_IOMAP=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_USE_FOR_EXT2=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_ONLINE_SCRUB is not set +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_FS_DAX=y +CONFIG_FS_DAX_PMD=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_EXPORTFS_BLOCK_OPS=y +CONFIG_FILE_LOCKING=y +# CONFIG_MANDATORY_FILE_LOCKING is not set +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_QUOTACTL_COMPAT=y +CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_FAT_DEFAULT_UTF8 is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +CONFIG_PROC_VMCORE_DEVICE_DUMP=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_CHILDREN=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_CRAMFS_MTD is not set +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_FILE_CACHE is not set +CONFIG_SQUASHFS_FILE_DIRECT=y +# CONFIG_SQUASHFS_DECOMP_SINGLE is not set +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_FTRACE is not set +CONFIG_PSTORE_RAM=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +# CONFIG_NFS_V2 is not set +CONFIG_NFS_V3=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y +# CONFIG_NFSD_BLOCKLAYOUT is not set +CONFIG_NFSD_SCSILAYOUT=y +# CONFIG_NFSD_FLEXFILELAYOUT is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=m +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_CEPH_FS=m +# CONFIG_CEPH_FSCACHE is not set +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set +CONFIG_CIFS_DFS_UPCALL=y +# CONFIG_CIFS_SMB_DIRECT is not set +# CONFIG_CIFS_FSCACHE is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_TRUSTED_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_WRITABLE_HOOKS=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_PAGE_TABLE_ISOLATION=y +CONFIG_SECURITY_INFINIBAND=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_INTEL_TXT=y +CONFIG_LSM_MMAP_MIN_ADDR=65535 +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_HARDENED_USERCOPY_FALLBACK=y +CONFIG_FORTIFY_SOURCE=y +# CONFIG_STATIC_USERMODEHELPER is not set +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +CONFIG_SECURITY_YAMA=y +CONFIG_INTEGRITY=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_INTEGRITY_TRUSTED_KEYRING=y +CONFIG_INTEGRITY_AUDIT=y +CONFIG_IMA=y +CONFIG_IMA_MEASURE_PCR_IDX=10 +CONFIG_IMA_LSM_RULES=y +# CONFIG_IMA_TEMPLATE is not set +CONFIG_IMA_NG_TEMPLATE=y +# CONFIG_IMA_SIG_TEMPLATE is not set +CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" +CONFIG_IMA_DEFAULT_HASH_SHA1=y +# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set +CONFIG_IMA_DEFAULT_HASH="sha1" +# CONFIG_IMA_WRITE_POLICY is not set +# CONFIG_IMA_READ_POLICY is not set +CONFIG_IMA_APPRAISE=y +# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set +CONFIG_IMA_APPRAISE_BOOTPARAM=y +CONFIG_IMA_TRUSTED_KEYRING=y +# CONFIG_IMA_BLACKLIST_KEYRING is not set +# CONFIG_IMA_LOAD_X509 is not set +CONFIG_EVM=y +CONFIG_EVM_ATTR_FSUUID=y +# CONFIG_EVM_ADD_XATTRS is not set +# CONFIG_EVM_LOAD_X509 is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_RSA=y +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_GLUE_HELPER_X86=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=m +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_AEGIS128L is not set +# CONFIG_CRYPTO_AEGIS256 is not set +# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set +# CONFIG_CRYPTO_MORUS640 is not set +# CONFIG_CRYPTO_MORUS640_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280 is not set +# CONFIG_CRYPTO_MORUS1280_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280_AVX2 is not set +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_ECHAINIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CFB=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRC32_PCLMUL=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_POLY1305=m +CONFIG_CRYPTO_POLY1305_X86_64=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_SSSE3=y +CONFIG_CRYPTO_SHA256_SSSE3=y +CONFIG_CRYPTO_SHA512_SSSE3=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +# CONFIG_CRYPTO_SM3 is not set +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_BLOWFISH_X86_64=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAMELLIA_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST5_AVX_X86_64=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_CAST6_AVX_X86_64=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES3_EDE_X86_64=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_CHACHA20=m +CONFIG_CRYPTO_CHACHA20_X86_64=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m +# CONFIG_CRYPTO_SM4 is not set +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_TWOFISH_X86_64=m +CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m +CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_HASH=y +CONFIG_CRYPTO_DRBG_CTR=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_USER_API=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=y +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +CONFIG_CRYPTO_DEV_CCP=y +CONFIG_CRYPTO_DEV_CCP_DD=m +CONFIG_CRYPTO_DEV_SP_CCP=y +CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +CONFIG_CRYPTO_DEV_SP_PSP=y +CONFIG_CRYPTO_DEV_QAT=m +CONFIG_CRYPTO_DEV_QAT_DH895xCC=m +CONFIG_CRYPTO_DEV_QAT_C3XXX=m +CONFIG_CRYPTO_DEV_QAT_C62X=m +CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m +CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m +CONFIG_CRYPTO_DEV_QAT_C62XVF=m +CONFIG_CRYPTO_DEV_NITROX=m +CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m +CONFIG_CRYPTO_DEV_CHELSIO=m +CONFIG_CHELSIO_IPSEC_INLINE=y +# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set +# CONFIG_CRYPTO_DEV_VIRTIO is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +CONFIG_SIGNED_PE_FILE_VERIFICATION=y + +# +# Certificates for signature checking +# +CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +CONFIG_SYSTEM_BLACKLIST_KEYRING=y +CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC4 is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +CONFIG_XXHASH=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_ENC8=y +CONFIG_REED_SOLOMON_DEC8=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_VIRT_OPS=y +CONFIG_SWIOTLB=y +CONFIG_SGL_ALLOC=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_CPUMASK_OFFSTACK=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_CORDIC=m +# CONFIG_DDR is not set +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_SIGNATURE=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_ARCH_HAS_UACCESS_MCSAFE=y +CONFIG_SBITMAP=y +CONFIG_PARMAN=m +# CONFIG_STRING_SELFTEST is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_STACK_VALIDATION=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_DEBUG_SHIRQ=y + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_ON_OOPS_VALUE=1 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_INFO=y +CONFIG_SCHEDSTATS=y +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +CONFIG_STACKTRACE=y +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +CONFIG_FUNCTION_ERROR_INJECTION=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_FENTRY=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_PREEMPTIRQ_EVENTS is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_HWLAT_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENTS=y +# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set +CONFIG_UPROBE_EVENTS=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_FUNCTION_PROFILER=y +# CONFIG_BPF_KPROBE_OVERRIDE is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_TRACING_MAP=y +CONFIG_HIST_TRIGGERS=y +# CONFIG_TRACEPOINT_BENCHMARK is not set +CONFIG_RING_BUFFER_BENCHMARK=m +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_TRACE_EVAL_MAP_FILE is not set +# CONFIG_TRACING_EVENTS_GPIO is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_DMA_API_DEBUG is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +CONFIG_TEST_KSTRTOX=y +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_PARMAN is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_MEMTEST is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +CONFIG_KGDB_TESTS=y +# CONFIG_KGDB_TESTS_ON_BOOT is not set +CONFIG_KGDB_LOW_LEVEL_TRAP=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x0 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_EARLY_PRINTK_USB=y +# CONFIG_X86_VERBOSE_BOOTUP is not set +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_DBGP=y +CONFIG_EARLY_PRINTK_EFI=y +CONFIG_EARLY_PRINTK_USB_XDBC=y +# CONFIG_X86_PTDUMP is not set +# CONFIG_EFI_PGT_DUMP is not set +# CONFIG_DEBUG_WX is not set +CONFIG_DOUBLEFAULT=y +# CONFIG_DEBUG_TLBFLUSH is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_X86_DECODER_SELFTEST=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_ENTRY is not set +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_X86_DEBUG_FPU is not set +# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNWINDER_ORC=y +# CONFIG_UNWINDER_FRAME_POINTER is not set -- 1.8.3

1 0

[PATCH] files_cgroup: Fix soft lockup when refcnt overflow.
by Yang Yingliang 26 Feb '20

26 Feb '20

From: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31087 DTS: DTS2020022609725 CVE: NA --------------------- There is a soft lockup call trace as below: CPU: 0 PID: 1360 Comm: imapsvcd Kdump: loaded Tainted: G OE task: ffff8a7296e1eeb0 ti: ffff8a7296aa0000 task.ti: ffff8a7296aa0000 RIP: 0010:[<ffffffffb691ecb4>] [<ffffffffb691ecb4>] __css_tryget+0x24/0x50 RSP: 0018:ffff8a7296aa3db8 EFLAGS: 00000a87 RAX: 0000000080000000 RBX: ffff8a7296aa3df8 RCX: ffff8a72820d9a08 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8a72820d9a00 RBP: ffff8a7296aa3db8 R08: 000000000001c360 R09: ffffffffb6a478f4 R10: ffffffffb6935e83 R11: ffffffffffffffd0 R12: 0000000057d35cd8 R13: 000000d000000002 R14: ffffffffb6892fbe R15: 000000d000000002 FS: 0000000000000000(0000) GS:ffff8a72fec00000(0063) knlGS:00000000c6e65b40 CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 CR2: 0000000057d35cd8 CR3: 00000007e8008000 CR4: 00000000003607f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [<ffffffffb6a93578>] files_cgroup_assign+0x48/0x60 [<ffffffffb6a47972>] dup_fd+0xb2/0x2f0 [<ffffffffb6935e83>] ? audit_alloc+0xe3/0x180 [<ffffffffb6893a03>] copy_process+0xbd3/0x1a40 [<ffffffffb6894a21>] do_fork+0x91/0x320 [<ffffffffb6f329e6>] ? trace_do_page_fault+0x56/0x150 [<ffffffffb6894d36>] SyS_clone+0x16/0x20 [<ffffffffb6f3bf8c>] ia32_ptregs_common+0x4c/0xfc code: 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 8d 4f 08 48 89 e5 8b 47 08 8d 90 00 00 00 80 85 c0 0f 49 d0 8d 72 01 89 d0 f0 0f b1 When the child process exit, we doesn't call dec refcnt, so, the refcnt maybe overflow. Then the 'task_get_css' will dead loop because the 'css_refcnt' will return an unbias refcnt, if the refcnt is negitave, '__css_tryget' always return false, then 'task_get_css' dead looped. The child process always call 'close_files' when exit, add dec refcnt in it. Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/file.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/file.c b/fs/file.c index 6b9ad66..5b191c3 100644 --- a/fs/file.c +++ b/fs/file.c @@ -423,6 +423,9 @@ static struct fdtable *close_files(struct files_struct * files) set >>= 1; } } +#ifdef CONFIG_CGROUP_FILES + files_cgroup_remove(files); +#endif return fdt; } -- 1.8.3

1 0

[PATCH 0/2] fixes CVE-2020-8648
by Yang Yingliang 25 Feb '20

25 Feb '20

Jiri Slaby (2): vt: selection, handle pending signals in paste_selection vt: selection, close sel_buffer race drivers/tty/vt/selection.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) -- 1.8.3

1 2

[PATCH 00/10] fix compile error and implenting NUMA affinity for order workqueue
by Yang Yingliang 24 Feb '20

24 Feb '20

Biaoxiang Ye (2): workqueue: implement NUMA affinity for single thread workqueue iscsi: use dynamic single thread workqueue to improve performance Gao Xun (1): RDMA/hns: Compilation Configuration update Yang Yingliang (5): Revert "PCI: fix kabi change in struct pci_bus" Revert "membarrier/kabi: fix kabi for membarrier_state" Revert "bdi: fix kabi for struct backing_dev_info" Revert "debugfs: fix kabi for function debugfs_remove_recursive" iscsi: add member for NUMA aware order workqueue zhangyi (F) (2): jbd2: move the clearing of b_modified flag to the journal_unmap_buffer() jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer .../infiniband/hw/hns/roce-customer/rdfx_entry.c | 3 +- .../infiniband/hw/hns/roce-customer/rdfx_intf.c | 4 +- drivers/scsi/iscsi_tcp.c | 8 ++++ drivers/scsi/libiscsi.c | 15 +++++-- fs/debugfs/inode.c | 6 --- fs/jbd2/commit.c | 46 ++++++++++++---------- fs/jbd2/transaction.c | 10 +++-- include/linux/backing-dev-defs.h | 4 -- include/linux/debugfs.h | 2 +- include/linux/mm_types.h | 20 +++++----- include/linux/pci.h | 6 +-- include/linux/workqueue.h | 1 + include/scsi/libiscsi.h | 1 + kernel/sched/sched.h | 11 ++---- kernel/workqueue.c | 15 ++++--- 15 files changed, 84 insertions(+), 68 deletions(-) -- 1.8.3

1 10

[PATCH 0/7] Some fixes for kernel
by Yang Yingliang 20 Feb '20

20 Feb '20

Boris Ostrovsky (1): x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit Li Bin (1): iommu/iova: avoid softlockup in fq_flush_timeout Xiongfeng Wang (1): sysrq: avoid concurrently info printing by 'sysrq-trigger' Yang Yingliang (1): timer_list: avoid other cpu soft lockup when printing timer list Yufen Yu (2): bdi: fix memleak in bdi_register_va() bdi: get device name under rcu protect Zhang Xiaoxu (1): files_cgroup: fix error pointer when kvm_vm_worker_thread arch/x86/kvm/x86.c | 3 +++ block/bfq-iosched.c | 7 +++++-- block/blk-core.c | 4 +++- drivers/iommu/iova.c | 31 +++++++++++++++++++++---------- drivers/tty/sysrq.c | 6 ++++++ fs/filescontrol.c | 8 +++++++- fs/fs-writeback.c | 4 +++- include/linux/backing-dev.h | 15 +++++++++++++++ include/linux/iova.h | 1 + include/trace/events/wbt.h | 12 ++++-------- include/trace/events/writeback.h | 18 ++++++++---------- kernel/time/timer_list.c | 8 ++++++-- mm/backing-dev.c | 4 ++-- 13 files changed, 84 insertions(+), 37 deletions(-) -- 1.8.3

1 7

[PATCH 00/82] Some fixes and cleanup for drivers
by Yang Yingliang 20 Feb '20

20 Feb '20

Bohong Lin (2): net: hns3: cae clear warnings net: hns3: change version to 1.9.35.0 Colin Ian King (1): net: hns3: make array spec_opcode static const, makes object smaller Gao Xun (1): RDMA/hns:security review update Greg Kroah-Hartman (1): net: hns3: no need to check return value of debugfs_create functions Guangbin Huang (21): net: hns3: delete blank lines and space for cleanup net: hns: modify print function used in hclge_init_ae_dev() net: hns: remove unnecessary newline net: hns3: optimize code of hclge_init_kdump_kernel_config() function net: hns3: optimize local variable of hclge_set_loopback() function net: hns3: optimize code of hns3_parse_vlan_tag() function net: hns: replace goto with return in function hclge_set_vf_uc_mac_addr net: hns3: modify print format in hns3_set_ringpa() net: hns3: replace goto with return in function hns3_set_ringparam() net: hns3: modify code of hclge_mac_phy_link_status_wait() function net: hns3: add error process in hclge_mac_link_status_wait() function net: hns3: support query vf ring and vector map relation net: hns3: modify error process of hclge_phy_link_status_wait() net: hns3: move struct hclge_mdio_cfg_cmd declaration net: hns3: rename variable flag in hnae3_unregister_client() net: hns3: modify return value in hns3_dbg_cmd_write net: hns: replace space with tab for cleanup net: hns3: delete unnecessary judgement in hns3_get_stats() net: hns3: optimize parameter of hclge_phy_link_status_wait() function net: hns3: optimize parameter of hclge_set_phy_loopback() function net: hns3: modify timing of reading register in hclge_reset_wait() Guojia Liao (6): net: hns3: opmitize the table entry restore when resetting net: hns3: delete some useless function and definication net: hns3: delete some useless repeated printing net: hns3: fix bug that PF set VF mac didn't work net: hns3: do not schedule the periodical task when reset fail net: hns3: fix port base vlan add fail when concurrent with reset Huazhong Tan (10): net: hns3: sync some code from net-next part1 net: hns3: split hclge_reset() into preparing and rebuilding part net: hns3: split hclgevf_reset() into preparing and rebuilding part net: hns3: refactor the precedure of PF FLR net: hns3: enlarge HCLGE_RESET_WAIT_CNT net: hns3: modify hclge_func_reset_sync_vf()'s return type to void net: hns3: refactor the procedure of VF FLR net: hns3: refactor the notification scheme of PF reset net: hns3: modify the location of updating the hardware reset done counter net: hns3: set VF's default reset_type to HNAE3_NONE_RESET Jian Shen (5): net: hns3: refine mac address configure for PF net: hns3: use mutex vport_lock intead of spin lock umv_lock net: hns3: refine mac address configure for VF net: hns3: refactor the promisc mode setting net: hns3: skip mac speed and duplex modification checking for fibre port support autoneg Junxin Chen (5): net: fix bug and change version to 1.9.33.0 net: hns3: add protect for parameters and remove unused functions net: hns3: fix bug when parameter check net: hns3: fix compile error when CONFIG_HNS3_DCB is not set net: hns3: clear devil number for hns3_cae Shengzui You (2): net: hns3: update hns3 version to 1.9.35.1 net: hns3: Remove the function of vf check mac address Yonglong Liu (4): net: hns3: modify the irq name of tqp vectors net: hns3: modify the irq name of misc vectors net: hns3: add enabled tc numbers and dwrr weight info in debugfs net: hns3: fix missing help info for qs shaper in debugfs Yu'an Wang (12): hac: sec: add initial configuration in sec_engine_init acc: Remove uacce mode 1 logic below hisilicon uacce: Remove uacce mode 1 relatives qm: fix wrong number of sg elements after dma map zip: use offset fields in sqe to avoid SG_SPLIT qm: remove invalid addr print hpre: optimize key process before free hpre: add likely and unlikey in result judgement sec: change sec_control reg config rde: optimize debug regs clear logic qm: fixup compilation dependency qm: fix the way judge whether q stop in user space Yufeng Mo (1): net: hns3: support of dump mac id and loopback status in debugfs Zhao Weibo (6): RDMA/hns:remove useless header in cmd RDMA/hns: handle device err after device state to UNIT RDMA/hns: avoid potential overflow of RDMA/hns: Add roce dfx of arm_cnt RDMA/hns: fix the bug of out-of-bonds-read in post send RDMA/hns: some robust optimize in rdfx fengsheng (2): drivers : sysctl remove rcu_lock drivers : sysctl fixup some param dont check the legitimacy gaoxun (1): net: hns3: cae security review liuzhongzhu (1): net: hns3: Add "mac table" information query function zhuweijia (1): net: hns3: cae io_param definition updated drivers/crypto/hisilicon/Kconfig | 1 - drivers/crypto/hisilicon/hpre/hpre_crypto.c | 96 +- drivers/crypto/hisilicon/hpre/hpre_main.c | 64 +- drivers/crypto/hisilicon/qm.c | 513 +++---- drivers/crypto/hisilicon/qm.h | 1 - drivers/crypto/hisilicon/rde/rde_main.c | 217 ++- drivers/crypto/hisilicon/sec2/sec_main.c | 54 +- drivers/crypto/hisilicon/sgl.c | 29 +- drivers/crypto/hisilicon/zip/zip_crypto.c | 102 +- drivers/crypto/hisilicon/zip/zip_main.c | 50 +- drivers/infiniband/hw/hns/Makefile | 9 +- drivers/infiniband/hw/hns/hns_roce_cmd.c | 1 - drivers/infiniband/hw/hns/hns_roce_device.h | 4 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 53 +- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 2 +- drivers/infiniband/hw/hns/hns_roce_main.c | 10 +- drivers/infiniband/hw/hns/hns_roce_mr.c | 14 +- .../hw/hns/roce-customer/hns_hw_v2_test.c | 61 - .../hw/hns/roce-customer/hns_hw_v2_test.h | 10 - .../hw/hns/roce-customer/hns_roce_test.c | 18 - .../hw/hns/roce-customer/hns_roce_test.h | 8 - .../infiniband/hw/hns/roce-customer/rdfx_common.h | 2 +- .../infiniband/hw/hns/roce-customer/rdfx_entry.c | 8 +- .../infiniband/hw/hns/roce-customer/rdfx_hw_v2.c | 16 +- .../infiniband/hw/hns/roce-customer/rdfx_intf.c | 7 +- .../infiniband/hw/hns/roce-customer/rdfx_main.c | 22 +- .../infiniband/hw/hns/roce-customer/rdfx_sysfs.c | 39 +- drivers/net/ethernet/hisilicon/hns3/Makefile | 27 +- drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h | 6 + drivers/net/ethernet/hisilicon/hns3/hnae3.c | 6 +- drivers/net/ethernet/hisilicon/hns3/hnae3.h | 26 +- .../hisilicon/hns3/hns-customer/hns3_ext.c | 603 --------- .../hisilicon/hns3/hns-customer/hns3_ext.h | 102 -- .../hisilicon/hns3/hns-customer/hns3pf/hclge_ext.c | 996 -------------- .../hisilicon/hns3/hns-customer/hns3pf/hclge_ext.h | 142 -- .../hns3/hns-customer/hns3pf/hclge_main_it.c | 20 +- .../hns3/hns-customer/hns3pf/hclge_main_it.h | 2 - .../hisilicon/hns3/hns3_cae/hns3_cae_checksum.c | 19 +- .../hisilicon/hns3/hns3_cae/hns3_cae_checksum.h | 5 +- .../hisilicon/hns3/hns3_cae/hns3_cae_cmd.c | 4 +- .../hisilicon/hns3/hns3_cae/hns3_cae_common.c | 116 -- .../hisilicon/hns3/hns3_cae/hns3_cae_common.h | 25 - .../hisilicon/hns3/hns3_cae/hns3_cae_dcb.c | 62 +- .../hisilicon/hns3/hns3_cae/hns3_cae_dcb.h | 36 +- .../hisilicon/hns3/hns3_cae/hns3_cae_dcqcn.c | 17 +- .../hisilicon/hns3/hns3_cae/hns3_cae_dcqcn.h | 7 +- .../hisilicon/hns3/hns3_cae/hns3_cae_dfx.c | 40 +- .../hisilicon/hns3/hns3_cae/hns3_cae_dfx.h | 9 +- .../hisilicon/hns3/hns3_cae/hns3_cae_ext.c | 426 ------ .../hisilicon/hns3/hns3_cae/hns3_cae_ext.h | 68 - .../ethernet/hisilicon/hns3/hns3_cae/hns3_cae_fd.c | 56 +- .../ethernet/hisilicon/hns3/hns3_cae/hns3_cae_fd.h | 5 +- .../hisilicon/hns3/hns3_cae/hns3_cae_gro.c | 24 +- .../hisilicon/hns3/hns3_cae/hns3_cae_gro.h | 7 +- .../hns3/hns3_cae/hns3_cae_hilink_param.c | 16 +- .../hns3/hns3_cae/hns3_cae_hilink_param.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_init.c | 35 +- .../hisilicon/hns3/hns3_cae/hns3_cae_irq.c | 16 +- .../hisilicon/hns3/hns3_cae/hns3_cae_irq.h | 5 +- .../hisilicon/hns3/hns3_cae/hns3_cae_lamp.c | 35 - .../hisilicon/hns3/hns3_cae/hns3_cae_lamp.h | 36 - .../hisilicon/hns3/hns3_cae/hns3_cae_led.c | 8 +- .../hisilicon/hns3/hns3_cae/hns3_cae_led.h | 5 +- .../hisilicon/hns3/hns3_cae/hns3_cae_lib.c | 71 +- .../hisilicon/hns3/hns3_cae/hns3_cae_lib.h | 7 +- .../hisilicon/hns3/hns3_cae/hns3_cae_mac.c | 20 +- .../hisilicon/hns3/hns3_cae/hns3_cae_mac.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_mactbl.c | 63 - .../hisilicon/hns3/hns3_cae/hns3_cae_mactbl.h | 30 - .../hisilicon/hns3/hns3_cae/hns3_cae_pfc_storm.c | 45 +- .../hisilicon/hns3/hns3_cae/hns3_cae_pfc_storm.h | 5 +- .../hisilicon/hns3/hns3_cae/hns3_cae_pkt.c | 741 ---------- .../hisilicon/hns3/hns3_cae/hns3_cae_pkt.h | 67 - .../hisilicon/hns3/hns3_cae/hns3_cae_port.c | 22 +- .../hisilicon/hns3/hns3_cae/hns3_cae_port.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_promisc.c | 40 +- .../hisilicon/hns3/hns3_cae/hns3_cae_promisc.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qinfo.c | 43 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qinfo.h | 10 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qos.c | 138 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qos.h | 19 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qres.c | 35 +- .../hisilicon/hns3/hns3_cae/hns3_cae_qres.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_reset.c | 27 +- .../hisilicon/hns3/hns3_cae/hns3_cae_reset.h | 7 +- .../hisilicon/hns3/hns3_cae/hns3_cae_rss.c | 47 +- .../hisilicon/hns3/hns3_cae/hns3_cae_rss.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_stat.c | 48 +- .../hisilicon/hns3/hns3_cae/hns3_cae_stat.h | 4 +- .../ethernet/hisilicon/hns3/hns3_cae/hns3_cae_tm.c | 235 ++-- .../ethernet/hisilicon/hns3/hns3_cae/hns3_cae_tm.h | 24 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.c | 34 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 9 +- .../hisilicon/hns3/hns3_cae/hns3_cae_vlan.c | 20 +- .../hisilicon/hns3/hns3_cae/hns3_cae_vlan.h | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_xsfp.c | 28 +- .../hisilicon/hns3/hns3_cae/hns3_cae_xsfp.h | 4 +- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 24 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 243 +--- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 12 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 14 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 240 +++- .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.h | 17 + .../net/ethernet/hisilicon/hns3/hns3pf/hclge_err.c | 2 +- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 1424 ++++++++++++++------ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 58 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 226 +++- .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.c | 11 + .../ethernet/hisilicon/hns3/hns3pf/hclge_mdio.h | 11 - .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 2 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c | 2 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 474 +++++-- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 32 +- drivers/soc/hisilicon/sysctl/sysctl_drv.c | 2 +- drivers/soc/hisilicon/sysctl/sysctl_local_ras.c | 31 +- drivers/uacce/dummy_drv/dummy_wd_dev.c | 1 - drivers/uacce/dummy_drv/dummy_wd_v2.c | 1 - drivers/uacce/uacce.c | 512 +------ include/linux/uacce.h | 10 +- include/uapi/linux/uacce.h | 6 +- 121 files changed, 3192 insertions(+), 6445 deletions(-) delete mode 100644 drivers/infiniband/hw/hns/roce-customer/hns_hw_v2_test.c delete mode 100644 drivers/infiniband/hw/hns/roce-customer/hns_hw_v2_test.h delete mode 100644 drivers/infiniband/hw/hns/roce-customer/hns_roce_test.c delete mode 100644 drivers/infiniband/hw/hns/roce-customer/hns_roce_test.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3_ext.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3_ext.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_ext.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns-customer/hns3pf/hclge_ext.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_common.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_common.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_ext.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_ext.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_lamp.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_lamp.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_mactbl.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_mactbl.h delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_pkt.c delete mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3_cae/hns3_cae_pkt.h -- 1.8.3

1 82

[PATCH 00/35] Fixes some CVEs and kernel bugs
by Yang Yingliang 20 Feb '20

20 Feb '20

Al Viro (2): do_last(): fetch directory ->i_mode and ->i_uid before it's too late vfs: fix do_last() regression Amir Goldstein (1): debugfs: simplify __debugfs_remove_file() Jan Kara (23): jbd2: Fixup stale comment in commit code jbd2: Completely fill journal descriptor blocks ext4: Move marking of handle as sync to ext4_add_nondir() ext4: Do not iput inode under running transaction ext4: Fix ext4_should_journal_data() for EA inodes ext4: Use ext4_journal_extend() instead of jbd2_journal_extend() ext4: Avoid unnecessary revokes in ext4_alloc_branch() ext4: Provide function to handle transaction restarts ext4, jbd2: Provide accessor function for handle credits ocfs2: Use accessor function for h_buffer_credits jbd2: Reorganize jbd2_journal_stop() jbd2: Drop pointless check from jbd2_journal_stop() jbd2: Drop pointless wakeup from jbd2_journal_stop() jbd2: Factor out common parts of stopping and restarting a handle jbd2: Account descriptor blocks into t_outstanding_credits jbd2: Drop jbd2_space_needed() jbd2: Reserve space for revoke descriptor blocks jbd2: Rename h_buffer_credits to h_total_credits jbd2: Make credit checking more strict ext4: Reserve revoke credits for freed blocks jbd2: Provide trace event for handle restarts jbd2: Fine tune estimate of necessary descriptor blocks jbd2: make jbd2_handle_buffer_credits() handle reserved handles Liu Song (1): jbd2: remove repeated assignments in __jbd2_log_wait_for_space() Shijie Luo (1): ext4: add cond_resched() to ext4_protect_reserved_inode Wen Huang (1): libertas: Fix two buffer overflows at parsing bss descriptor Yufen Yu (2): bdi: fix use-after-free for the bdi device bdi: fix kabi for struct backing_dev_info yangerkun (1): ext4: reserve revoke credits in __ext4_new_inode yu kuai (3): block: rename 'q->debugfs_dir' and 'q->blk_trace->dir' in blk_unregister_queue() simple_recursive_removal(): kernel-side rm -rf for ramfs-style filesystems debugfs: fix kabi for function debugfs_remove_recursive block/blk-cgroup.c | 7 +- block/blk-sysfs.c | 44 +++++ drivers/net/wireless/marvell/libertas/cfg.c | 16 +- fs/debugfs/inode.c | 126 +++----------- fs/ext4/block_validity.c | 1 + fs/ext4/ext4.h | 4 +- fs/ext4/ext4_jbd2.c | 32 +++- fs/ext4/ext4_jbd2.h | 106 ++++++++++-- fs/ext4/extents.c | 89 ++++++---- fs/ext4/ialloc.c | 4 +- fs/ext4/indirect.c | 125 ++++++++------ fs/ext4/inode.c | 31 +--- fs/ext4/migrate.c | 103 +++++------ fs/ext4/namei.c | 39 +++-- fs/ext4/resize.c | 46 ++--- fs/ext4/xattr.c | 94 ++++------ fs/jbd2/checkpoint.c | 3 +- fs/jbd2/commit.c | 9 +- fs/jbd2/journal.c | 35 +++- fs/jbd2/revoke.c | 6 + fs/jbd2/transaction.c | 254 ++++++++++++++++------------ fs/libfs.c | 65 +++++++ fs/namei.c | 17 +- fs/ocfs2/alloc.c | 32 ++-- fs/ocfs2/journal.c | 8 +- fs/tracefs/inode.c | 111 ++---------- include/linux/backing-dev-defs.h | 7 + include/linux/device.h | 5 + include/linux/fs.h | 2 + include/linux/jbd2.h | 87 ++++++---- include/linux/tracefs.h | 1 - include/trace/events/ext4.h | 13 +- include/trace/events/jbd2.h | 16 +- kernel/trace/trace.c | 4 +- kernel/trace/trace_events.c | 6 +- kernel/trace/trace_hwlat.c | 2 +- mm/backing-dev.c | 49 +++++- 37 files changed, 894 insertions(+), 705 deletions(-) -- 1.8.3

1 35

[PATCH] drm/i915/gen9: Clear residual context state on context switch
by Yang Yingliang 07 Feb '20

07 Feb '20

From: Akeem G Abodunrin <akeem.g.abodunrin(a)intel.com> commit bc8a76a152c5f9ef3b48104154a65a68a8b76946 upstream. Intel ID: PSIRT-TA-201910-001 CVEID: CVE-2019-14615 Intel GPU Hardware prior to Gen11 does not clear EU state during a context switch. This can result in information leakage between contexts. For Gen8 and Gen9, hardware provides a mechanism for fast cleardown of the EU state, by issuing a PIPE_CONTROL with bit 27 set. We can use this in a context batch buffer to explicitly cleardown the state on every context switch. As this workaround is already in place for gen8, we can borrow the code verbatim for Gen9. Signed-off-by: Mika Kuoppala <mika.kuoppala(a)linux.intel.com> Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin(a)intel.com> Cc: Kumar Valsan Prathap <prathap.kumar.valsan(a)intel.com> Cc: Chris Wilson <chris.p.wilson(a)intel.com> Cc: Balestrieri Francesco <francesco.balestrieri(a)intel.com> Cc: Bloomfield Jon <jon.bloomfield(a)intel.com> Cc: Dutt Sudeep <sudeep.dutt(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/i915/intel_lrc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lrc.c b/drivers/gpu/drm/i915/intel_lrc.c index 6937ef0b..13e97fa 100644 --- a/drivers/gpu/drm/i915/intel_lrc.c +++ b/drivers/gpu/drm/i915/intel_lrc.c @@ -1562,6 +1562,15 @@ static u32 *gen9_init_indirectctx_bb(struct intel_engine_cs *engine, u32 *batch) /* WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt,glk */ batch = gen8_emit_flush_coherentl3_wa(engine, batch); + /* WaClearSlmSpaceAtContextSwitch:skl,bxt,kbl,glk,cfl */ + batch = gen8_emit_pipe_control(batch, + PIPE_CONTROL_FLUSH_L3 | + PIPE_CONTROL_GLOBAL_GTT_IVB | + PIPE_CONTROL_CS_STALL | + PIPE_CONTROL_QW_WRITE, + i915_ggtt_offset(engine->scratch) + + 2 * CACHELINE_BYTES); + batch = emit_lri(batch, lri, ARRAY_SIZE(lri)); /* WaClearSlmSpaceAtContextSwitch:kbl */ -- 1.8.3

1 0

[PATCH 00/14] Some bug and CVE fixes
by Yang Yingliang 05 Feb '20

05 Feb '20

Cheng Jian (2): membarrier/kabi: fix kabi for membarrier_state selftest/membarrier: fix build error Mathieu Desnoyers (5): sched/membarrier: Remove redundant check sched/membarrier: Fix p->mm->membarrier_state racy load selftests, sched/membarrier: Add multi-threaded test sched/membarrier: Skip IPIs when mm->mm_users == 1 sched/membarrier: Return -ENOMEM to userspace on memory allocation failure Peter Zijlstra (2): sched: Clean up active_mm reference counting membarrier: Fix RCU locking bug caused by faulty merge Tyler Hicks (1): drm/i915: Fix use-after-free when destroying GEM context Xiongfeng Wang (2): PCI: add a member in 'struct pci_bus' to record the original 'pci_ops' PCI: fix kabi change in struct pci_bus Ying Fang (2): KVM: arm/arm64: use esr_ec as trace field of kvm_exit tracepoint KVM: tools/kvm_stat: Fix kvm_exit filter name drivers/gpu/drm/i915/i915_gem_context.c | 13 +- drivers/pci/probe.c | 7 +- fs/exec.c | 2 +- include/linux/mm_types.h | 8 + include/linux/pci.h | 5 +- include/linux/sched/mm.h | 8 +- kernel/sched/core.c | 49 ++-- kernel/sched/membarrier.c | 236 +++++++++------ kernel/sched/sched.h | 37 +++ tools/kvm/kvm_stat/kvm_stat | 8 +- tools/testing/selftests/membarrier/.gitignore | 3 +- tools/testing/selftests/membarrier/Makefile | 4 +- .../testing/selftests/membarrier/membarrier_test.c | 312 -------------------- .../selftests/membarrier/membarrier_test_impl.h | 317 +++++++++++++++++++++ .../membarrier/membarrier_test_multi_thread.c | 72 +++++ .../membarrier/membarrier_test_single_thread.c | 23 ++ virt/kvm/arm/arm.c | 2 +- virt/kvm/arm/trace.h | 14 +- 18 files changed, 678 insertions(+), 442 deletions(-) delete mode 100644 tools/testing/selftests/membarrier/membarrier_test.c create mode 100644 tools/testing/selftests/membarrier/membarrier_test_impl.h create mode 100644 tools/testing/selftests/membarrier/membarrier_test_multi_thread.c create mode 100644 tools/testing/selftests/membarrier/membarrier_test_single_thread.c -- 1.8.3

1 14

[PATCH] PCI/AER: increments pci bus reference count in aer-inject process
by Yang Yingliang 19 Jan '20

19 Jan '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: bugfix bugzilla: 28335 CVE: NA ------------------------------------------------- When I test 'aer-inject' with the following procedures: 1. inject a fatal error into a PCI device 2. remove the parent device by sysfs 3. execute command 'rmmod aer-inject' I came across the following use-after-free. [ 297.581524] ================================================================== [ 297.581543] BUG: KASAN: use-after-free in pci_bus_set_ops+0xb4/0xb8 [ 297.581545] Read of size 8 at addr ffff802edbde80e0 by task rmmod/21839 [ 297.581552] CPU: 119 PID: 21839 Comm: rmmod Kdump: loaded Not tainted 4.19.36 #1 [ 297.581554] Hardware name: Huawei TaiShan 2280 V2/BC82AMDD, BIOS 1.05 09/18/2019 [ 297.581556] Call trace: [ 297.581561] dump_backtrace+0x0/0x360 [ 297.581563] show_stack+0x24/0x30 [ 297.581569] dump_stack+0xd8/0x104 [ 297.581576] print_address_description+0x68/0x278 [ 297.581578] kasan_report+0x204/0x330 [ 297.581580] __asan_report_load8_noabort+0x30/0x40 [ 297.581582] pci_bus_set_ops+0xb4/0xb8 [ 297.581591] aer_inject_exit+0x198/0x334 [aer_inject] [ 297.581595] __arm64_sys_delete_module+0x310/0x490 [ 297.581601] el0_svc_common+0xfc/0x278 [ 297.581603] el0_svc_handler+0x50/0xc0 [ 297.581605] el0_svc+0x8/0xc [ 297.581608] Allocated by task 1: [ 297.581611] kasan_kmalloc+0xe0/0x190 [ 297.581614] kmem_cache_alloc_trace+0x104/0x218 [ 297.581616] pci_alloc_bus+0x50/0x2e0 [ 297.581618] pci_add_new_bus+0xa8/0xe08 [ 297.581620] pci_scan_bridge_extend+0x884/0xb28 [ 297.581623] pci_scan_child_bus_extend+0x350/0x628 [ 297.581625] pci_scan_child_bus+0x24/0x30 [ 297.581627] pci_scan_bridge_extend+0x3b8/0xb28 [ 297.581629] pci_scan_child_bus_extend+0x350/0x628 [ 297.581631] pci_scan_child_bus+0x24/0x30 [ 297.581635] acpi_pci_root_create+0x558/0x888 [ 297.581640] pci_acpi_scan_root+0x198/0x330 [ 297.581641] acpi_pci_root_add+0x7bc/0xbb0 [ 297.581646] acpi_bus_attach+0x2f4/0x728 [ 297.581647] acpi_bus_attach+0x1b0/0x728 [ 297.581649] acpi_bus_attach+0x1b0/0x728 [ 297.581651] acpi_bus_scan+0xa0/0x110 [ 297.581657] acpi_scan_init+0x20c/0x500 [ 297.581659] acpi_init+0x54c/0x5d4 [ 297.581661] do_one_initcall+0xbc/0x480 [ 297.581665] kernel_init_freeable+0x5fc/0x6ac [ 297.581670] kernel_init+0x18/0x128 [ 297.581671] ret_from_fork+0x10/0x18 [ 297.581673] Freed by task 19270: [ 297.581675] __kasan_slab_free+0x120/0x228 [ 297.581677] kasan_slab_free+0x10/0x18 [ 297.581678] kfree+0x80/0x1f8 [ 297.581680] release_pcibus_dev+0x54/0x68 [ 297.581686] device_release+0xd4/0x1c0 [ 297.581689] kobject_put+0x12c/0x400 [ 297.581691] device_unregister+0x30/0xc0 [ 297.581693] pci_remove_bus+0xe8/0x1c0 [ 297.581695] pci_remove_bus_device+0xd0/0x2f0 [ 297.581697] pci_stop_and_remove_bus_device_locked+0x2c/0x40 [ 297.581701] remove_store+0x1b8/0x1d0 [ 297.581703] dev_attr_store+0x60/0x80 [ 297.581708] sysfs_kf_write+0x104/0x170 [ 297.581710] kernfs_fop_write+0x23c/0x430 [ 297.581713] __vfs_write+0xec/0x4e0 [ 297.581714] vfs_write+0x12c/0x3d0 [ 297.581715] ksys_write+0xd0/0x190 [ 297.581716] __arm64_sys_write+0x70/0xa0 [ 297.581718] el0_svc_common+0xfc/0x278 [ 297.581720] el0_svc_handler+0x50/0xc0 [ 297.581721] el0_svc+0x8/0xc [ 297.581724] The buggy address belongs to the object at ffff802edbde8000 which belongs to the cache kmalloc-2048 of size 2048 [ 297.581726] The buggy address is located 224 bytes inside of 2048-byte region [ffff802edbde8000, ffff802edbde8800) [ 297.581727] The buggy address belongs to the page: [ 297.581730] page:ffff7e00bb6f7a00 count:1 mapcount:0 mapping:ffff8026de810780 index:0x0 compound_mapcount: 0 [ 297.591520] flags: 0x2ffffe0000008100(slab|head) [ 297.596121] raw: 2ffffe0000008100 ffff7e00bb6f5008 ffff7e00bb6ff608 ffff8026de810780 [ 297.596123] raw: 0000000000000000 00000000000f000f 00000001ffffffff 0000000000000000 [ 297.596124] page dumped because: kasan: bad access detected [ 297.596126] Memory state around the buggy address: [ 297.596128] ffff802edbde7f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 297.596129] ffff802edbde8000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 297.596131] >ffff802edbde8080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 297.596132] ^ [ 297.596133] ffff802edbde8100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 297.596135] ffff802edbde8180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 297.596135] ================================================================== It is because when we unload the module and restore the member 'pci_ops' of 'pci_bus', the 'pci_bus' has been freed. This patch increments the reference count of 'pci_bus' when we modify its member 'pci_ops' and decrements the reference count after we have restored its member. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/pci/pcie/aer_inject.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/pci/pcie/aer_inject.c b/drivers/pci/pcie/aer_inject.c index 48024a8..03ee265 100644 --- a/drivers/pci/pcie/aer_inject.c +++ b/drivers/pci/pcie/aer_inject.c @@ -304,6 +304,13 @@ static int pci_bus_set_aer_ops(struct pci_bus *bus) spin_lock_irqsave(&inject_lock, flags); if (ops == &aer_inj_pci_ops) goto out; + /* + * increments the reference count of the pci bus. Otherwise, when we + * restore the 'pci_ops' in 'aer_inject_exit', the 'pci_bus' may have + * been freed. + */ + pci_bus_get(bus); + pci_bus_ops_init(bus_ops, bus, ops); list_add(&bus_ops->list, &pci_bus_ops_list); bus_ops = NULL; @@ -543,6 +550,7 @@ static void __exit aer_inject_exit(void) while ((bus_ops = pci_bus_ops_pop())) { pci_bus_set_ops(bus_ops->bus, bus_ops->ops); + pci_bus_put(bus_ops->bus); kfree(bus_ops); } -- 1.8.3

1 0

[PATCH 0/2] Its support hibernation
by Yang Yingliang 19 Jan '20

19 Jan '20

Currently, if we test hibernation, it will fails at the ITS driver, because its can't resume and suspend successuly during the phase of hibernation. Add its herbinate state to support its resume correctly. Hongbo Yao (2): PM / hibernate: introduce system_in_hibernation irqchip/gic-v3-its: its support herbination drivers/irqchip/irq-gic-v3-its.c | 19 +++++++++++++++++-- include/linux/suspend.h | 2 ++ kernel/power/hibernate.c | 11 +++++++++++ 3 files changed, 30 insertions(+), 2 deletions(-) -- 1.8.3

1 2

[PATCH hulk-4.19-next 0/2] Its support hibernation
by Hongbo Yao 19 Jan '20

19 Jan '20

Currently, if we test hibernation, it will fails at the ITS driver, because its can't resume and suspend successuly during the phase of hibernation. Add its herbinate state to support its resume correctly. Hongbo Yao (2): PM / hibernate: introduce system_in_hibernation irqchip/gic-v3-its: its support herbination drivers/irqchip/irq-gic-v3-its.c | 19 +++++++++++++++++-- include/linux/suspend.h | 2 ++ kernel/power/hibernate.c | 11 +++++++++++ 3 files changed, 30 insertions(+), 2 deletions(-) -- 2.20.1

1 2

[PATCH] config: enable CONFIG_SMMU_BYPASS_DEV by default
by Yang Yingliang 17 Jan '20

17 Jan '20

hulk inclusion category: feature bugzilla: 28210 CVE: NA ------------------------------------------------- Enable CONFIG_SMMU_BYPASS_DEV by default. Reviewed-By: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/hulk_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/hulk_defconfig b/arch/arm64/configs/hulk_defconfig index 5ded386..7859fd4 100644 --- a/arch/arm64/configs/hulk_defconfig +++ b/arch/arm64/configs/hulk_defconfig @@ -4593,6 +4593,7 @@ CONFIG_IOMMU_PAGE_FAULT=y CONFIG_ARM_SMMU=y CONFIG_ARM_SMMU_V3=y # CONFIG_QCOM_IOMMU is not set +CONFIG_SMMU_BYPASS_DEV=y # # Remoteproc drivers -- 1.8.3

1 0

[PATCH 0/7] Fix some bugs and CVEs
by Yang Yingliang 16 Jan '20

16 Jan '20

Dedy Lansky (1): cfg80211/mac80211: make ieee80211_send_layer2_update a public function Jaegeuk Kim (1): f2fs: support swap file w/ DIO Jouni Malinen (1): mac80211: Do not send Layer 2 Update frame before authorization Keith Busch (1): PCI/AER: Refactor error injection fallbacks Peng Wang (1): kernfs: fix potential null pointer dereference Shmulik Ladkani (1): net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device Wei Li (1): arm64: fix calling nmi_enter() repeatedly when IPI_CPU_CRASH_STOP arch/arm64/kernel/smp.c | 7 ++- drivers/pci/pcie/aer_inject.c | 66 +++++++++++--------- fs/f2fs/data.c | 140 +++++++++++++++++++++++++++++++++++++++--- fs/f2fs/f2fs.h | 2 +- fs/kernfs/dir.c | 3 +- include/net/cfg80211.h | 11 ++++ include/trace/events/f2fs.h | 11 ++-- net/mac80211/cfg.c | 58 ++--------------- net/mac80211/sta_info.c | 4 ++ net/sched/act_mirred.c | 22 ++++--- net/wireless/util.c | 45 ++++++++++++++ 11 files changed, 259 insertions(+), 110 deletions(-) -- 1.8.3

1 7

[PATCH 00/83] Backport lts patches from Linux-4.19.95
by Yang Yingliang 16 Jan '20

16 Jan '20

Merge 83 patches from 4.19.95 stable branch (84 total) beside 1 already merged patches: 21f0802 mwifiex: Fix heap overflow in mmwifiex_process_tdls_action_frame() Aditya Pakki (1): rfkill: Fix incorrect check to avoid NULL pointer dereference Alexander Shishkin (1): perf/x86/intel: Fix PT PMI handling Andreas Kemnade (1): regulator: rn5t618: fix module aliases Andrew Lunn (1): net: dsa: mv88e6xxx: Preserve priority when setting CPU port. Andrey Konovalov (2): USB: dummy-hcd: use usb_urb_dir_in instead of usb_pipein USB: dummy-hcd: increase max number of devices to 32 Anson Huang (2): cpufreq: imx6q: read OCOTP through nvmem for imx6ul/imx6ull ARM: dts: imx6ul: use nvmem-cells for cpu speed grading Arvind Sankar (3): efi/gop: Return EFI_NOT_FOUND if there are no usable GOPs efi/gop: Return EFI_SUCCESS if a usable GOP was found efi/gop: Fix memory leak in __gop_query32/64() Chan Shu Tak, Alex (1): llc2: Fix return statement of llc_stat_ev_rx_null_dsap_xid_c (and _test_c) Chen-Yu Tsai (2): net: stmmac: dwmac-sun8i: Allow all RGMII modes net: stmmac: dwmac-sunxi: Allow all RGMII modes Christian Borntraeger (1): s390/purgatory: do not build purgatory with kcov, kasan and friends Chuhong Yuan (2): spi: spi-cavium-thunderx: Add missing pci_release_regions() drm/exynos: gsc: add missed component_del Cristian Birsan (1): net: usb: lan78xx: Fix error message format specifier Daniel Borkmann (1): bpf: Fix passing modified ctx to ld/abs/ind instruction Daniel T. Lee (2): samples: bpf: Replace symbol compare of trace_event samples: bpf: fix syscall_tp due to unused syscall Daniele Palmas (1): USB: serial: option: add Telit ME910G1 0x110a composition Dave Young (1): x86/efi: Update e820 with reserved EFI boot services data to fix kexec breakage Dragos Tarcatu (1): ASoC: topology: Check return value for soc_tplg_pcm_create() Eric Dumazet (6): gtp: fix bad unlock balance in gtp_encap_enable_socket macvlan: do not assume mac_header is set in macvlan_broadcast() net: usb: lan78xx: fix possible skb leak pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM vlan: fix memory leak in vlan_dev_set_egress_priority vlan: vlan_changelink() should propagate errors Eric Sandeen (1): fs: avoid softlockups in s_inodes iterators Florian Fainelli (2): ARM: dts: BCM5301X: Fix MDIO node address/size cells ARM: dts: Cygnus: Fix MDIO node address/size cells Florian Westphal (1): netfilter: ctnetlink: netns exit must wait for callbacks Greg Kroah-Hartman (1): Linux 4.19.95 Haiyang Zhang (1): hv_netvsc: Fix unwanted rx_table reset Hangbin Liu (1): vxlan: fix tos value before xmit Hans de Goede (1): ASoC: Intel: bytcr_rt5640: Update quirk for Teclast X89 Helge Deller (1): parisc: Fix compiler warnings in debug_core.c Jan Höppner (1): s390/dasd/cio: Interpret ccw_device_get_mdc return value correctly Jason A. Donenfeld (1): powerpc/spinlocks: Include correct header for static key Johan Hovold (1): USB: core: fix check for duplicate endpoints Jose Abreu (4): net: stmmac: Do not accept invalid MTU values net: stmmac: xgmac: Clear previous RX buffer size net: stmmac: RX buffer size must be 16 byte aligned net: stmmac: Always arm TX Timer at end of transmission start Logan Gunthorpe (1): PCI/switchtec: Read all 64 bits of part_event_bitmap Lorenz Bauer (1): bpf: Clear skb->tstamp in bpf_redirect when necessary Manish Chopra (2): bnx2x: Do not handle requests from VFs after parity bnx2x: Fix logic to get total no. of PFs per engine Marco Elver (1): locking/spinlock/debug: Fix various data races Masami Hiramatsu (1): selftests/ftrace: Fix multiple kprobe testcase Mike Rapoport (1): powerpc: Ensure that swiotlb buffer is allocated from low memory Nikolay Borisov (1): btrfs: Fix error messages in qgroup_rescan_init Pablo Neira Ayuso (3): netfilter: nft_set_rbtree: bogus lookup/get on consecutive elements in named sets netfilter: nf_tables: validate NFT_SET_ELEM_INTERVAL_END netfilter: nf_tables: validate NFT_DATA_VALUE after nft_data_init() Paul Chaignon (1): bpf, mips: Limit to 33 tail calls Pengcheng Yang (1): tcp: fix "old stuff" D-SACK causing SACK to be treated as D-SACK Petr Machata (2): mlxsw: spectrum_qdisc: Ignore grafting of invisible FIFO net: sch_prio: When ungrafting, replace with FIFO Phil Sutter (1): netfilter: uapi: Avoid undefined left-shift in xt_sctp.h Qi Zhou (1): usb: missing parentheses in USE_NEW_SCHEME Shengjiu Wang (1): ASoC: wm8962: fix lambda value Srikar Dronamraju (1): powerpc/vcpu: Assume dedicated processors as non-preempt Stefan Haberland (1): s390/dasd: fix memleak in path handling error case Stefan Roese (1): ARM: dts: imx6ul: imx6ul-14x14-evk.dtsi: Fix SPI NOR probing Stefan Wahren (1): ARM: dts: bcm283x: Fix critical trip point Sudeep Holla (1): ARM: vexpress: Set-up shared OPP table instead of individual for each CPU Sudip Mukherjee (1): libtraceevent: Fix lib installation with O= Sven Schnelle (1): parisc: add missing __init annotation Thinh Nguyen (1): usb: dwc3: gadget: Fix request complete check Thomas Hebb (1): kconfig: don't crash on NULL expressions in expr_eq() Tomi Valkeinen (1): ARM: dts: am437x-gp/epos-evm: fix panel compatible Tzung-Bi Shih (1): ASoC: max98090: fix possible race conditions Vasundhara Volam (1): bnxt_en: Return error if FW returns more data than dump length Vignesh Raghavendra (1): spi: spi-ti-qspi: Fix a bug when accessing non default CS Vishal Kulkarni (1): cxgb4: Fix kernel panic while accessing sge_info Wen Yang (2): regulator: fix use after free issue sch_cake: avoid possible divide by zero in cake_enqueue() Xiaotao Yin (1): iommu/iova: Init the struct iova to fix the possible memleak Xin Long (1): sctp: free cmd->obj.chunk for the unprocessed SCTP_CMD_REPLY Yang Yingliang (1): block: fix memleak when __blk_rq_map_user_iov() is failed Makefile | 2 +- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- arch/arm/boot/dts/am43x-epos-evm.dts | 2 +- arch/arm/boot/dts/bcm-cygnus.dtsi | 4 +- arch/arm/boot/dts/bcm283x.dtsi | 2 +- arch/arm/boot/dts/bcm5301x.dtsi | 4 +- arch/arm/boot/dts/imx6ul-14x14-evk.dtsi | 2 +- arch/arm/boot/dts/imx6ul.dtsi | 6 ++ arch/arm/mach-vexpress/spc.c | 12 +++- arch/mips/net/ebpf_jit.c | 9 +-- arch/parisc/include/asm/cmpxchg.h | 10 ++- arch/parisc/kernel/drivers.c | 2 +- arch/powerpc/include/asm/spinlock.h | 5 +- arch/powerpc/mm/mem.c | 8 +++ arch/powerpc/platforms/pseries/setup.c | 7 ++ arch/s390/purgatory/Makefile | 6 +- arch/s390/purgatory/string.c | 3 + arch/x86/events/core.c | 9 ++- arch/x86/platform/efi/quirks.c | 6 +- block/blk-map.c | 2 +- drivers/cpufreq/imx6q-cpufreq.c | 52 +++++++++----- drivers/firmware/efi/libstub/gop.c | 80 +++++----------------- drivers/gpu/drm/exynos/exynos_drm_gsc.c | 1 + drivers/iommu/iova.c | 2 +- drivers/net/dsa/mv88e6xxx/global1.c | 5 ++ drivers/net/dsa/mv88e6xxx/global1.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 12 +++- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.h | 1 + drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c | 12 ++++ drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 38 +++++++--- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.h | 4 ++ drivers/net/ethernet/chelsio/cxgb4/cxgb4_debugfs.c | 4 ++ .../net/ethernet/mellanox/mlxsw/spectrum_qdisc.c | 7 ++ drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 3 + drivers/net/ethernet/stmicro/stmmac/dwmac-sunxi.c | 2 +- drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h | 2 + drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 3 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 16 ++++- drivers/net/gtp.c | 5 +- drivers/net/hyperv/hyperv_net.h | 3 +- drivers/net/hyperv/netvsc_drv.c | 4 +- drivers/net/hyperv/rndis_filter.c | 10 ++- drivers/net/macvlan.c | 2 +- drivers/net/usb/lan78xx.c | 11 ++- drivers/net/vxlan.c | 4 +- drivers/pci/switch/switchtec.c | 4 +- drivers/regulator/core.c | 4 +- drivers/regulator/rn5t618-regulator.c | 1 + drivers/s390/block/dasd_eckd.c | 28 ++------ drivers/s390/cio/device_ops.c | 2 +- drivers/spi/spi-cavium-thunderx.c | 2 + drivers/spi/spi-ti-qspi.c | 6 +- drivers/usb/core/config.c | 70 +++++++++++++++---- drivers/usb/core/hub.c | 2 +- drivers/usb/dwc3/gadget.c | 7 ++ drivers/usb/gadget/udc/dummy_hcd.c | 10 +-- drivers/usb/serial/option.c | 2 + fs/btrfs/qgroup.c | 4 +- fs/drop_caches.c | 2 +- fs/inode.c | 7 ++ fs/notify/fsnotify.c | 1 + fs/quota/dquot.c | 1 + include/linux/if_ether.h | 8 +++ include/uapi/linux/netfilter/xt_sctp.h | 6 +- kernel/bpf/verifier.c | 9 ++- kernel/locking/spinlock_debug.c | 32 ++++----- net/8021q/vlan.h | 1 + net/8021q/vlan_dev.c | 3 +- net/8021q/vlan_netlink.c | 19 +++-- net/core/filter.c | 1 + net/ipv4/tcp_input.c | 5 +- net/llc/llc_station.c | 4 +- net/netfilter/nf_conntrack_netlink.c | 3 + net/netfilter/nf_tables_api.c | 16 +++-- net/netfilter/nft_bitwise.c | 4 +- net/netfilter/nft_cmp.c | 6 ++ net/netfilter/nft_range.c | 10 +++ net/netfilter/nft_set_rbtree.c | 21 ++++-- net/rfkill/core.c | 7 +- net/sched/sch_cake.c | 2 +- net/sched/sch_fq.c | 6 +- net/sched/sch_prio.c | 10 ++- net/sctp/sm_sideeffect.c | 28 +++++--- samples/bpf/syscall_tp_kern.c | 18 ++++- samples/bpf/trace_event_user.c | 4 +- scripts/kconfig/expr.c | 7 ++ sound/soc/codecs/max98090.c | 8 +-- sound/soc/codecs/max98090.h | 1 - sound/soc/codecs/wm8962.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 8 ++- sound/soc/soc-topology.c | 8 ++- tools/lib/traceevent/Makefile | 1 + .../ftrace/test.d/kprobe/multiple_kprobes.tc | 6 +- 94 files changed, 543 insertions(+), 265 deletions(-) create mode 100644 arch/s390/purgatory/string.c -- 1.8.3

1 83

[PATCH] block: fix use-after-free on cached last_lookup partition
by Yang Yingliang 16 Jan '20

16 Jan '20

From: Yufen Yu <yuyufen(a)huawei.com> hulk inclusion category: bugfix bugzilla: 27962 CVE: NA --------------------------- delete_partition() clears the cached last_lookup partition. However the .last_lookup cache may be overwritten by one IO path after it is cleared from delete_partition(). Then another IO path may use the cached deleting partition after __delete_partition() is called, then use-after-free is triggered on the cached partition. Fixes the issue by the following approach: 1) always get the partition's refcount via hd_struct_try_get() before setting .last_lookup 2) move clearing .last_lookup from delete_partition() to __delete_partition() which is release handle of the partition's percpu-refcount, so that no IO path can overwrite .last_lookup after it is cleared in __delete_partition(). It is one candidate approach of Yufen's patch[1] which adds overhead in fast path by indirect lookup which may introduce one extra cacheline in IO path. Also this patch relies on percpu-refcount's protection, and it is easier to understand and verify. [1] https://lore.kernel.org/linux-block/20200109013551.GB9655@ming.t460p/T/#t Reported-by: Yufen Yu <yuyufen(a)huawei.com> Cc: Christoph Hellwig <hch(a)infradead.org> Cc: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Conflict: include/linux/genhd.h block/blk-core.c Signed-off-by: Yufen Yu <yuyufen(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-core.c | 12 ------------ block/genhd.c | 6 +++++- block/partition-generic.c | 10 +++++++++- include/linux/genhd.h | 1 + 4 files changed, 15 insertions(+), 14 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index dcf1ab0..a52a2f5 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2788,18 +2788,6 @@ void blk_account_io_start(struct request *rq, bool new_io) part_stat_inc(cpu, part, merges[rw]); } else { part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq)); - if (!hd_struct_try_get(part)) { - /* - * The partition is already being removed, - * the request will be accounted on the disk only - * - * We take a reference on disk->part0 although that - * partition will never be deleted, so we can treat - * it as any other partition. - */ - part = &rq->rq_disk->part0; - hd_struct_get(part); - } part_round_stats(rq->q, cpu, part); part_inc_in_flight(rq->q, part, rw); rq->part = part; diff --git a/block/genhd.c b/block/genhd.c index 6e8543c..ff9d46d 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -272,17 +272,21 @@ struct hd_struct *disk_map_sector_rcu(struct gendisk *disk, sector_t sector) ptbl = rcu_dereference(disk->part_tbl); part = rcu_dereference(ptbl->last_lookup); - if (part && sector_in_part(part, sector)) + if (part && sector_in_part(part, sector) && hd_struct_try_get(part)) return part; for (i = 1; i < ptbl->len; i++) { part = rcu_dereference(ptbl->part[i]); if (part && sector_in_part(part, sector)) { + if (!hd_struct_try_get(part)) + goto exit; rcu_assign_pointer(ptbl->last_lookup, part); return part; } } + exit: + hd_struct_get(&disk->part0); return &disk->part0; } EXPORT_SYMBOL_GPL(disk_map_sector_rcu); diff --git a/block/partition-generic.c b/block/partition-generic.c index 98d60a5..8ad6dca 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -263,6 +263,12 @@ static void delete_partition_work_fn(struct work_struct *work) void __delete_partition(struct percpu_ref *ref) { struct hd_struct *part = container_of(ref, struct hd_struct, ref); + struct disk_part_tbl *ptbl = + rcu_dereference_protected(part->disk->part_tbl, 1); + + rcu_assign_pointer(ptbl->last_lookup, NULL); + put_device(disk_to_dev(part->disk)); + INIT_RCU_WORK(&part->rcu_work, delete_partition_work_fn); queue_rcu_work(system_wq, &part->rcu_work); } @@ -284,8 +290,9 @@ void delete_partition(struct gendisk *disk, int partno) if (!part) return; + get_device(disk_to_dev(disk)); rcu_assign_pointer(ptbl->part[partno], NULL); - rcu_assign_pointer(ptbl->last_lookup, NULL); + kobject_put(part->holder_dir); device_del(part_to_dev(part)); @@ -350,6 +357,7 @@ struct hd_struct *add_partition(struct gendisk *disk, int partno, p->nr_sects = len; p->partno = partno; p->policy = get_disk_ro(disk); + p->disk = disk; if (info) { struct partition_meta_info *pinfo = alloc_part_info(disk); diff --git a/include/linux/genhd.h b/include/linux/genhd.h index be6fe1e..df0d01d 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -129,6 +129,7 @@ struct hd_struct { struct disk_stats dkstats; #endif struct percpu_ref ref; + struct gendisk *disk; struct rcu_work rcu_work; KABI_RESERVE(1) -- 1.8.3

1 0

[PATCH 000/429] Backport lts patches from Linux-4.19.92 & 93 & 94
by Yang Yingliang 16 Jan '20

16 Jan '20

Merge 211 patches from 4.19.92 stable branch (219 total) beside 8 already merged patches: e99af2c af_packet: set defaule value for tmo 3717a45 rtlwifi: prevent memory leak in rtl_usb_probe 60bb696 libertas: fix a potential NULL pointer dereference 5524867 drm/amdkfd: fix a potential NULL pointer dereference (v2) 1b3e52d mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring e7e11c0 net: hns3: add struct netdev_queue debug info for TX timeout debdd16 media: rcar_drif: fix a memory disclosure e83a26a nbd: fix shutdown and recv work deadlock v2 Merge 109 patches from 4.19.93 stable branch (113 total) beside 3 already merged patches: 332ed88 perf strbuf: Remove redundant va_end() in strbuf_addv() 40696eb Make filldir[64]() verify the directory entry filename is valid 0643c3d filldir[64]: remove WARN_ON_ONCE() for bad directory entries Delay to merge commit 0af1ad3b1ce5 ("ext4: update direct I/O read lock pattern for IOCB_NOWAIT") because it conflicts with 7d434de5f404 ("Revert "ext4: Allow parallel DIO reads""). Merge 111 patches from 4.19.94 stable branch (114 total) beside 3 already merged patches: 8b9bf46 scsi: libsas: stop discovering if oob mode is disconnected d933de8 media: usb: fix memory leak in af9005_identify_state 67f028a tcp: annotate tp->rcv_nxt lockless reads Adrian Hunter (4): x86/insn: Add some Intel instructions to the opcode map mmc: sdhci: Workaround broken command queuing on Intel GLK mmc: sdhci: Add a quirk for broken command queuing perf script: Fix brstackinsn for AUXTRACE Al Viro (1): fix compat handling of FICLONERANGE, FIDEDUPERANGE and FS_IOC_FIEMAP Aleksandr Yashkin (1): pstore/ram: Write new dumps to start of recycled zones Alexander Lobakin (1): net, sysctl: Fix compiler warning when only cBPF is present Alexander Shishkin (3): intel_th: pci: Add Comet Lake PCH-V support intel_th: pci: Add Elkhart Lake SOC support perf/x86/intel/bts: Fix the use of page_private() Alexandru Ardelean (1): iio: dln2-adc: fix iio_triggered_buffer_postenable() position Amir Goldstein (1): locks: print unsigned ino in /proc/locks Anand Jain (1): btrfs: send: remove WARN_ON for readonly mount Anand Moon (1): arm64: dts: meson: odroid-c2: Disable usb_otg bus to avoid power failed warning Anatol Pomazau (1): scsi: iscsi: Don't send data to unbound connection Andrea Righi (1): bcache: fix deadlock in bcache_allocator Andrew Duggan (1): HID: rmi: Check that the RMI_STARTED bit is set before unregistering the RMI transport device Andrew Jeffery (1): fsi: core: Fix small accesses and unaligned offsets via sysfs Andy Shevchenko (1): fbtft: Make sure string is NULL terminated Andy Whitcroft (1): PM / hibernate: memory_bm_find_bit(): Tighten node optimisation Aneesh Kumar K.V (2): powerpc/pseries: Don't fail hash page table insert for bolted mapping powerpc/book3s64/hash: Add cond_resched to avoid soft lockup warning Anilkumar Kolli (1): ath10k: fix backtrace on coredump Anthony Steinhauser (1): powerpc/security/book3s64: Report L1TF status in sysfs Antonio Messina (1): udp: fix integer overflow while computing available space in sk_rcvbuf Ard Biesheuvel (1): crypto: virtio - deal with unsupported input sizes Arnaldo Carvalho de Melo (1): perf regs: Make perf_reg_name() return "unknown" instead of NULL Arnd Bergmann (3): compat_ioctl: block: handle Persistent Reservations compat_ioctl: block: handle BLKREPORTZONE/BLKRESETZONE drm/msm: include linux/sched/task.h Bart Van Assche (3): block: Fix writeback throttling W=1 compiler warnings scsi: tracing: Fix handling of TRANSFER LENGTH == 0 for READ(6) and WRITE(6) scsi: target: iscsi: Wait for all commands to finish before freeing a session Bean Huo (1): scsi: ufs: fix potential bug which ends in system hang Ben Dooks (Codethink) (2): Bluetooth: missed cpu_to_le16 conversion in hci_init4_req pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler() Ben Greear (1): ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq Ben Hutchings (1): net: qlogic: Fix error paths in ql_alloc_large_buffers() Ben Zhang (1): ASoC: rt5677: Mark reg RT5677_PWR_ANLG2 as volatile Benjamin Berg (1): x86/mce: Lower throttling MCE messages' priority to warning Benoit Parrot (10): media: am437x-vpfe: Setting STD to current value is not an error media: i2c: ov2659: fix s_stream return value media: i2c: ov2659: Fix missing 720p register config media: ti-vpe: vpe: Fix Motion Vector vpdma stride media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number media: ti-vpe: vpe: Make sure YUYV is set as default format media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage Bjorn Andersson (1): ath10k: Correct error handling of dma_map_single() Blaž Hrastnik (1): HID: Improve Windows Precision Touchpad detection. Bo Wu (1): scsi: lpfc: Fix memory leak on lpfc_bsg_write_ebuf_set func Brian Foster (1): xfs: fix mount failure crash on invalid iclog memory access Brian Masney (1): drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings Cambda Zhu (1): tcp: Fix highest_sack and highest_sack_seq Catalin Marinas (1): arm64: Revert support for execute-only user mappings Chad Dupuis (1): scsi: qedf: Do not retry ELS request if qedf_alloc_cmd fails Chanho Min (1): mm/zsmalloc.c: fix the migrated zspage statistics. Chao Yu (2): f2fs: fix to update time in lazytime mode f2fs: fix to update dir's i_pino during cross_rename Chaotian Jing (1): mmc: mediatek: fix CMD_TA to 2 for MT8173 HS200/HS400 mode Chris Chiu (2): rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLC Christian Brauner (1): taskstats: fix data-race Christian König (1): drm/amdgpu: grab the id mgr lock while accessing passid_mapping Christophe JAILLET (1): media: cx88: Fix some error handling path in 'cx8800_initdev()' Christophe Leroy (3): powerpc/irq: fix stack overflow verification spi: fsl: don't map irq during probe spi: fsl: use platform_get_irq() instead of of_irq_to_resource() Chuhong Yuan (9): fjes: fix missed check in fjes_acpi_add media: si470x-i2c: add missed operations in remove spi: pxa2xx: Add missed security checks spi: tegra20-slink: add missed clk_unprepare ASoC: wm2200: add missed operations in remove and probe failure spi: st-ssc4: add missed pm_runtime_disable ASoC: wm5100: add missed pm_runtime_disable clocksource/drivers/asm9260: Add a check for of_clk_get RDMA/cma: add missed unregister_pernet_subsys in init failure Colin Ian King (4): drm/amdgpu: fix uninitialized variable pasid_mapping_needed apparmor: fix unsigned len comparison with less than zero ALSA: cs4236: fix error return comparison of an unsigned integer media: flexcop-usb: ensure -EIO is returned on error condition Coly Li (2): bcache: fix static checker warning in bcache_device_free() bcache: at least try to shrink 1 node in bch_mca_scan() Connor Kuehl (1): staging: rtl8188eu: fix possible null dereference Corentin Labbe (1): crypto: sun4i-ss - Fix 64-bit size_t warnings on sun4i-ss-hash.c Corey Minyard (1): ipmi: Don't allow device module unload when in use Cristian Birsan (1): net: usb: lan78xx: Fix suspend/resume PHY register access error Dan Carpenter (5): btrfs: return error pointer from alloc_test_extent_buffer ext4: unlock on error in ext4_expand_extra_isize() scsi: csiostor: Don't enable IRQs too early scsi: iscsi: qla4xxx: fix double free in probe Bluetooth: delete a stray unlock Daniel Axtens (1): powerpc/pseries/hvconsole: Fix stack overread via udbg Daniel Baluta (1): mailbox: imx: Fix Tx doorbell shutdown path Daniel Kurtz (1): drm/bridge: dw-hdmi: Restore audio when setting a mode Daniel T. Lee (1): samples: pktgen: fix proc_cmd command result check logic Daniel Vetter (1): drm: limit to INT_MAX in create_blob ioctl Darrick J. Wong (2): loop: fix no-unmap write-zeroes request behavior xfs: periodically yield scrub threads to the scheduler David Disseldorp (1): scsi: target: compare full CHAP_A Algorithm strings David Engraf (1): tty/serial: atmel: fix out of range clock divider handling David Galiffi (2): drm/amd/display: Fix dongle_caps containing stale information. drm/amd/display: Fixed kernel panic when booting with DP-to-HDMI dongle David Hildenbrand (1): powerpc/pseries/cmm: Implement release() function for sysfs device David Howells (3): afs: Fix SELinux setting security label on /afs afs: Fix creation calls in the dynamic root to fail with EOPNOTSUPP rxrpc: Fix possible NULL pointer access in ICMP handling Diego Elio Pettenò (1): cdrom: respect device capabilities during opening action Ding Xiang (1): ocfs2: fix passing zero to 'PTR_ERR' warning Doug Berger (1): ARM: 8937/1: spectre-v2: remove Brahma-B53 from hardening EJ Hsu (1): usb: gadget: fix wrong endpoint desc Eduard Hasenleithner (1): nvme: Discard workaround for non-conformant devices Eric Dumazet (10): dma-debug: add a schedule point in debug_dma_dump_mappings() 6pack,mkiss: fix possible deadlock netfilter: bridge: make sure to pull arp header in br_nf_forward_arp() inetpeer: fix data-race in inet_putpeer / inet_putpeer net: add a READ_ONCE() in skb_peek_tail() net: icmp: fix data-race in cmp_global_allow() hrtimer: Annotate lockless access to timer->state tcp/dccp: fix possible race __inet_lookup_established() tcp: do not send empty skb from tcp_write_xmit() net: add annotations on hh->hh_len lockless accesses Erkka Talvitie (1): USB: EHCI: Do not return -EPIPE when hub is disconnected Eugeniu Rosca (1): mmc: tmio: Add MMC_CAP_ERASE to allow erase/discard/trim requests Evan Green (1): Input: atmel_mxt_ts - disable IRQ across suspend Ezequiel Garcia (1): iommu: rockchip: Free domain on .domain_free Faiz Abbas (2): Revert "mmc: sdhci: Fix incorrect switch to HS mode" mmc: sdhci: Update the tuning failed messages to pr_debug level Filipe Manana (2): Btrfs: fix missing data checksums after replaying a log tree Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues Finn Thain (2): scsi: atari_scsi: sun3_scsi: Set sg_tablesize to 1 instead of SG_NONE scsi: NCR5380: Add disconnect_mask module parameter Florian Fainelli (6): irqchip/irq-bcm7038-l1: Enable parent IRQ if necessary ata: libahci_platform: Export again ahci_platform_<en/dis>able_phys() ata: ahci_brcm: Fix AHCI resources management ata: ahci_brcm: Allow optional reset controller to be used ata: ahci_brcm: Add missing clock management during recovery ata: ahci_brcm: BCM7425 AHCI requires AHCI_HFLAG_DELAY_ENGINE Florian Westphal (2): netfilter: ebtables: compat: reject all padding in matches/watchers selftests: rtnetlink: add addresses with fixed life time Geert Uytterhoeven (5): net: dst: Force 4-byte alignment of dst_metrics pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B clocksource/drivers/timer-of: Use unique device name instead of timer iio: adc: max9611: Fix too short conversion time delay dt-bindings: clock: renesas: rcar-usb2-clock-sel: Fix typo in example Gerald Schaefer (1): s390/mm: add mm_pxd_folded() checks to pxd_free() Greg Kroah-Hartman (4): Linux 4.19.92 Revert "powerpc/vcpu: Assume dedicated processors as non-preempt" Linux 4.19.93 Linux 4.19.94 Grygorii Strashko (2): net: phy: dp83867: enable robust auto-mdix net: ethernet: ti: ale: clean ale tbl on init and intf restart Guchun Chen (1): drm/amdgpu: add check before enabling/disabling broadcast mode Guenter Roeck (1): usb: xhci: Fix build warning seen with CONFIG_PM=n Guido Günther (1): leds: lm3692x: Handle failure to probe the regulator Guoqing Jiang (1): md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit Gustavo L. F. Walbon (1): powerpc/security: Fix wrong message when RFI Flush is disable Hangbin Liu (8): net: add bool confirm_neigh parameter for dst_ops.update_pmtu ip6_gre: do not confirm neighbor when do pmtu update gtp: do not confirm neighbor when do pmtu update net/dst: add new function skb_dst_update_pmtu_no_confirm tunnel: do not confirm neighbor when do pmtu update vti: do not confirm neighbor when do pmtu update sit: do not confirm neighbor when do pmtu update net/dst: do not confirm neighbor for vxlan and geneve pmtu update Hans Verkuil (5): media: cec-funcs.h: add status_req checks media: pulse8-cec: fix lost cec_transmit_attempt_done() call media: cec: CEC 2.0-only bcast messages were ignored media: cec: avoid decrementing transmit_queue_sz if it is 0 media: cec: check 'transmit_in_progress', not 'transmitting' Hans de Goede (6): ACPI: button: Add DMI quirk for Medion Akoya E2215T ASoC: Intel: bytcr_rt5640: Update quirk for Acer Switch 10 SW5-012 2-in-1 platform/x86: hp-wmi: Make buffer for HPWMI_FEATURE2_QUERY 128 bytes HID: logitech-hidpp: Silence intermittent get_battery_capacity errors pinctrl: baytrail: Really serialize all register accesses drm/nouveau: Move the declaration of struct nouveau_conn_atom up a bit Harald Freudenberger (1): s390/zcrypt: handle new reply code FILTERED_BY_HYPERVISOR Hawking Zhang (1): drm/amdgpu: disallow direct upload save restore list from gfx driver Heiko Carstens (2): s390/time: ensure get_clock_monotonic() returns monotonic values s390/smp: fix physical to logical CPU map for SMT Herbert Xu (2): crypto: atmel - Fix authenc support when it is set to m crypto: sun4i-ss - Fix 64-bit size_t warnings Hewenliang (1): libtraceevent: Fix memory leakage in copy_filter_type Hui Wang (1): ALSA: usb-audio: set the interface format after resume on Dell WD19 Ian Abbott (1): staging: comedi: gsc_hpdi: check dma_alloc_coherent() return value Ian Rogers (2): perf tools: Splice events onto evlist even on error perf parse: If pmu configuration fails free terms Ido Schimmel (1): selftests: forwarding: Delete IPv6 address at the end Ilya Leoshkevich (1): s390/disassembler: don't hide instruction addresses Imre Deak (1): drm/mst: Fix MST sideband up-reply failure handling Ingo Rohloff (1): usb: usbfs: Suppress problematic bind and unbind uevents. Ivan Khoronzhuk (1): selftests/bpf: Correct path to include msg + path James Clark (1): libsubcmd: Use -O0 with DEBUG=1 James Smart (7): scsi: lpfc: Fix discovery failures when target device connectivity bounces scsi: lpfc: Fix locking on mailbox command completion scsi: lpfc: Fix SLI3 hba in loop mode not discovering devices scsi: lpfc: Fix duplicate unreg_rpi error in port offline flow scsi: lpfc: fix: Coverity: lpfc_cmpl_els_rsp(): Null pointer dereferences nvme_fc: add module to ops template to allow module references nvme-fc: fix double-free scenarios on hw queues Jan H. Schönherr (1): x86/mce: Fix possibly incorrect severity calculation on AMD Jan Kara (3): jbd2: Fix statistics for the number of logged blocks bdev: Factor out bdev revalidation into a common helper bdev: Refresh bdev size for disks without partitioning Janusz Krzysztofik (3): media: ov6650: Fix crop rectangle alignment not passed back media: ov6650: Fix stored frame format not in sync with hardware media: ov6650: Fix stored crop rectangle not in sync with hardware Jaroslav Kysela (1): ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen Jason Gunthorpe (1): xen/gntdev: Use select for DMA_SHARED_BUFFER Jeffrey Hugo (1): clk: qcom: Allow constant ratio freq tables for rcg Jens Axboe (1): net: make socket read/write_iter() honor IOCB_NOWAIT Jia-Ju Bai (1): net: nfc: nci: fix a possible sleep-in-atomic-context bug in nci_uart_tty_receive() Jiangfeng Xiao (1): net: hisilicon: Fix a BUG trigered by wrong bytes_compl Jin Yao (1): perf report: Add warning when libunwind not compiled in Jinke Fan (1): HID: quirks: Add quirk for HP MSU1465 PIXART OEM mouse Johan Hovold (1): ALSA: usb-audio: fix set_format altsetting sanity check Johannes Berg (1): iwlwifi: check kasprintf() return value Johannes Weiner (1): kernel: sysctl: make drop_caches write-only John Garry (1): libata: Ensure ata_port probe has completed before detach John Johansen (1): apparmor: fix aa_xattrs_match() may sleep while holding a RCU lock Josef Bacik (6): btrfs: don't double lock the subvol_sem for rename exchange btrfs: do not call synchronize_srcu() in inode_tree_del btrfs: abort transaction after failed inode updates in create_subvol btrfs: skip log replay on orphaned roots btrfs: do not leak reloc root if we fail to read the fs root btrfs: handle ENOENT in btrfs_uuid_tree_iterate Juergen Gross (1): xen/balloon: fix ballooned page accounting without hotplug enabled Kai-Heng Feng (1): HID: i2c-hid: Reset ALPS touchpads on resume Kailang Yang (2): ALSA: hda/realtek - Add Bass Speaker and fixed dac for bass speaker ALSA: hda/realtek - Add headset Mic no shutup for ALC283 Kangjie Lu (1): drm/gma500: fix memory disclosures due to uninitialized bytes Keita Suzuki (1): tracing: Avoid memory leak in process_system_preds() Kevin Hao (1): watchdog: Fix the race between the release of watchdog_core_data and cdev Konstantin Khlebnikov (2): x86/MCE/AMD: Do not use rdmsr_safe_on_cpu() in smca_configure() fs/quota: handle overflows of sysctl fs.quota.* and report as unsigned long Krzysztof Wilczynski (1): iio: light: bh1750: Resolve compiler warning and make code more readable Laurent Pinchart (1): drm/panel: Add missing drm_panel_init() in panel drivers Leo Yan (3): perf test: Report failure for mmap events perf tests: Disable bp_signal testing for arm64 tty: serial: msm_serial: Fix lockup for sysrq and oops Leonard Crestez (4): PM / devfreq: Fix devfreq_notifier_call returning errno PM / devfreq: Set scaling_max_freq to max on OPP notifier error PM / devfreq: Don't fail devfreq_dev_release if not in list PM / devfreq: Check NULL governor in available_governors_show Lianbo Jiang (1): x86/crash: Add a forward declaration of struct kimage Lingling Xu (1): spi: sprd: adi: Add missing lock protection when rebooting Loic Poulain (1): media: venus: core: Fix msm8996 frequency table Lucas Stach (1): nvmem: imx-ocotp: reset error status on probe Luiz Augusto von Dentz (1): Bluetooth: Fix advertising duplicated flags Lukas Wunner (1): dmaengine: Fix access to uninitialized dma_slave_caps Lukasz Majewski (1): spi: Add call to spi_slave_abort() function when spidev driver is released Mahesh Bandewar (1): bonding: fix active-backup transition after link failure Manish Chopra (3): qede: Disable hardware gro when xdp prog is installed qede: Fix multicast mac configuration bnx2x: Fix PF-VF communication over multi-cos queues. Manjunath Patil (1): ixgbe: protect TX timestamping from API misuse Mao Wenan (1): net: dsa: LAN9303: select REGMAP when LAN9303 enable Maor Gottlieb (1): IB/mlx5: Fix steering rule of drop and count Marc Dionne (1): afs: Fix afs_find_server lookups for ipv4 peers Marcel Holtmann (1): rfkill: allocate static minor Marco Oliverio (1): netfilter: nf_queue: enqueue skbs with NULL dst Martin Blumenstingl (1): net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs Masahiro Yamada (2): scripts/kallsyms: fix definitely-lost memory leak libfdt: define INT32_MAX and UINT32_MAX in libfdt_env.h Masami Hiramatsu (14): perf probe: Fix to find range-only function instance perf probe: Fix to list probe event with correct line number perf probe: Walk function lines in lexical blocks perf probe: Fix to probe an inline function which has no entry pc perf probe: Fix to show ranges of variables in functions without entry_pc perf probe: Fix to show inlined function callsite without entry_pc perf probe: Fix to probe a function which has no entry pc perf probe: Skip overlapped location on searching variables perf probe: Return a better scope DIE if there is no best scope perf probe: Fix to show calling lines of inlined functions perf probe: Skip end-of-sequence and non statement lines perf probe: Filter out instances except for inlined subroutine and subprogram tracing/kprobe: Check whether the non-suffixed symbol is notrace perf probe: Fix to show function entry line as probe-able Masashi Honma (2): ath9k_htc: Modify byte order for an error message ath9k_htc: Discard undersized packets Mathieu Desnoyers (1): rseq/selftests: Fix: Namespace gettid() for compatibility with glibc 2.30 Matthew Bobrowski (1): ext4: iomap that extends beyond EOF should be marked dirty Matthias Kaehlcke (1): drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller Mattijs Korpershoek (1): Bluetooth: hci_core: fix init for HCI_USER_CHANNEL Maurizio Lombardi (1): scsi: scsi_debug: num_tgts must be >= 0 Max Gurtovoy (1): IB/iser: bound protection_sg size by data_sg size Miaoqing Pan (1): ath10k: fix get invalid tx rate for Mesh metric Michael Ellerman (3): crypto: vmx - Avoid weird build failures powerpc/pseries: Mark accumulate_stolen_time() as notrace powerpc/tools: Don't quote $objdump in scripts Michael Haener (1): platform/x86: pmc_atom: Add Siemens CONNECT X300 to critclk_systems DMI table Michael Hennerich (1): clk: clk-gpio: propagate rate change to parent Michael Roth (1): KVM: PPC: Book3S HV: use smp_mb() when setting/clearing host_ipi flag Michael Walle (1): ASoC: wm8904: fix regcache handling Michal Kalderon (1): RDMA/qedr: Fix memory leak in user qp and mr Mike Isely (1): media: pvrusb2: Fix oops on tear-down when radio support is not present Mike Rapoport (2): mips: fix build when "48 bits virtual memory" is enabled userfaultfd: require CAP_SYS_PTRACE for UFFD_FEATURE_EVENT_FORK Miquel Raynal (1): iio: adc: max1027: Reset the device at probe time Mitch Williams (1): ice: delay less Nathan Chancellor (2): tools/power/cpupower: Fix initializer override in hsw_ext_cstates powerpc: Don't add -mabi= flags when building with Clang Navid Emamdoost (3): net: gemini: Fix memory leak in gmac_setup_txqs staging: rtl8192u: fix multiple memory leaks on error path Bluetooth: Fix memory leak in hci_connect_le_scan Netanel Belgazal (1): net: ena: fix napi handler misbehavior when the napi budget is zero Nicholas Graumann (1): dmaengine: xilinx_dma: Clear desc_pendingcount in xilinx_dma_reset Nicholas Nunley (1): i40e: initialize ITRN registers with correct values Oliver Neukum (1): Bluetooth: btusb: fix PM leak in error case of setup Omar Sandoval (5): btrfs: don't prematurely free work in end_workqueue_fn() btrfs: don't prematurely free work in run_ordered_work() btrfs: don't prematurely free work in reada_start_machine_worker() btrfs: don't prematurely free work in scrub_missing_raid56_worker() xfs: don't check for AG deadlock for realtime files in bunmapi Pan Bian (2): spi: img-spfi: fix potential double release drm/amdgpu: fix potential double drop fence reference Parav Pandit (1): IB/mlx4: Follow mirror sequence of device add during device removal Paul Burton (1): MIPS: Avoid VDSO ABI breakage due to global register variable Paul Cercueil (1): irqchip: ingenic: Error out if IRQ domain creation failed Paul Durrant (1): xen-blkback: prevent premature module unload Petar Penkov (1): tun: fix data-race in gro_normal_list() Phil Sutter (1): netfilter: nft_tproxy: Fix port selector on Big Endian Pierre-Eric Pelloux-Prayer (1): drm/amdgpu: add cache flush workaround to gfx8 emit_fence Pierre-Louis Bossart (1): soundwire: intel: fix PDI/stream mapping for Bulk Ping-Ke Shih (1): rtlwifi: fix memory leak in rtl92c_set_fw_rsvdpagepkt() Prateek Sood (1): tracing: Fix lock inversion in trace_event_enable_tgid_record() Qian Cai (1): libnvdimm/btt: fix variable 'rc' set but not used Rafael J. Wysocki (1): cpufreq: Avoid leaving stale IRQ work items during CPU offline Rafał Miłecki (1): brcmfmac: remove monitor interface when detaching Rasmus Villemoes (1): mmc: sdhci-of-esdhc: Revert "mmc: sdhci-of-esdhc: add erratum A-009204 support" Robert Jarzmik (1): clk: pxa: fix one of the pxa RTC clocks Robert Richter (1): EDAC/ghes: Fix grain calculation Rodrigo Siqueira (1): drm/drm_vblank: Change EINVAL by the correct errno Roman Bolshakov (6): scsi: qla2xxx: Drop superfluous INIT_WORK of del_work scsi: qla2xxx: Don't call qlt_async_event twice scsi: qla2xxx: Fix PLOGI payload and ELS IOCB dump length scsi: qla2xxx: Configure local loop for N2N target scsi: qla2xxx: Send Notify ACK after N2N PLOGI scsi: qla2xxx: Ignore PORT UPDATE after N2N PLOGI Russell King (4): mod_devicetable: fix PHY module format net: phy: initialise phydev speed and duplex sanely net: marvell: mvpp2: phylink requires the link interrupt gpiolib: fix up emulated open drain outputs Sakari Ailus (1): media: smiapp: Register sensor after enabling runtime PM on the device Sam Bobroff (1): drm/amdgpu: fix bad DMA from INTERRUPT_CNTL2 Sami Tolvanen (2): syscalls/x86: Use the correct function type in SYSCALL_DEFINE0 x86/mm: Use the correct function type for native_set_fixmap() Sascha Hauer (1): libata: Fix retrieving of active qcs Scott Mayhew (1): nfsd4: fix up replay_matches_cache() Sean Paul (1): drm: mst: Fix query_payload ack reply struct SeongJae Park (1): xen/blkback: Avoid unmapping unmapped grant pages Shakeel Butt (1): memcg: account security cred as well to kmemcg Song Liu (1): bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack() Sreekanth Reddy (1): scsi: mpt3sas: Fix clear pending bit in ioctl status Srikar Dronamraju (1): powerpc/vcpu: Assume dedicated processors as non-preempt Stanimir Varbanov (1): media: venus: Fix occasionally failures to suspend Stefan Mavrodiev (1): drm/sun4i: hdmi: Remove duplicate cleanup calls Stefan Popa (1): iio: dac: ad5446: Add support for new AD5600 DAC Stefano Garzarella (1): vhost/vsock: accept only packets with the right dst_cid Stephan Gerhold (3): extcon: sm5502: Reset registers during initialization phy: qcom-usb-hs: Fix extcon double register after power cycle regulator: ab8500: Remove AB8505 USB regulator Steve Wise (1): rxe: correctly calculate iCRC for unaligned payloads Steven Rostedt (VMware) (1): tracing: Have the histogram compare functions convert to u64 first Subhash Jadavani (1): scsi: ufs: Fix error handing during hibern8 enter Sudip Mukherjee (1): parport: load lowlevel driver if ports not found Suwan Kim (2): usbip: Fix receive error in vhci-hcd when using scatter-gather usbip: Fix error path of vhci_recv_ret_submit() Sven Schnelle (2): s390/ftrace: fix endless recursion in function_graph tracer tracing: Fix endianness bug in histogram trigger Szymon Janc (1): Bluetooth: Workaround directed advertising bug in Broadcom controllers Taehee Yoo (5): gtp: do not allow adding duplicate tid and ms_addr pdp context gtp: fix wrong condition in gtp_genl_dump_pdp() gtp: fix an use-after-free in ipv4_pdp_find() gtp: avoid zero size hashtable net: core: limit nested device depth Takashi Iwai (8): ALSA: pcm: Avoid possible info leaks from PCM stream buffers ALSA: hda/ca0132 - Keep power on during processing DSP response ALSA: hda/ca0132 - Avoid endless loop ALSA: hda/ca0132 - Fix work handling in delayed HP detection ALSA: timer: Limit max amount of slave instances ALSA: hda - Downgrade error message for single-cmd fallback ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support code ALSA: firewire-motu: Correct a typo in the clock proc string Thierry Reding (3): drm/tegra: sor: Use correct SOR index on Tegra210 gpu: host1x: Allocate gather copy for host1x iommu/tegra-smmu: Fix page tables in > 4 GiB memory Thomas Gleixner (1): x86/ioapic: Prevent inconsistent state when moving an interrupt Thomas Pedersen (1): mac80211: consider QoS Null frames for STA_NULLFUNC_ACKED Thomas Richter (3): s390/cpum_sf: Check for SDBT and SDB consistency s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits s390/cpum_sf: Avoid SBD overflow condition in irq handler Toke Høiland-Jørgensen (1): libbpf: Fix error handling in bpf_map__reuse_fd() Tony Lindgren (1): hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled Tyrel Datwyler (4): PCI: rpaphp: Fix up pointer to first drc-info entry PCI: rpaphp: Don't rely on firmware feature to imply drc-info support PCI: rpaphp: Annotate and correctly byte swap DRC properties PCI: rpaphp: Correctly match ibm, my-drc-index to drc-name when using drc-info Vandana BN (1): media: v4l2-core: fix touch support in v4l_g_fmt Veerabhadrarao Badiganti (1): mmc: sdhci-msm: Correct the offset and value for DDR_CONFIG register Veeraiyan Chidambaram (1): usb: renesas_usbhs: add suspend event support in gadget mode Viresh Kumar (1): cpufreq: Register drivers only after CPU devices have been registered Vladimir Oltean (1): gpio: mpc8xxx: Don't overwrite default irq_set_type callback Vladis Dronov (1): ptp: fix the race between the release of ptp_clock and cdev Vladyslav Tarasiuk (1): net/mlxfw: Fix out-of-memory error in mfa2 flash burning Wang Xuerui (1): iwlwifi: mvm: fix unaligned read of rx_pkt_status Wen Yang (1): ftrace: Avoid potential division by zero in function profiler Will Deacon (2): pinctrl: devicetree: Avoid taking direct reference to device name string KVM: arm64: Ensure 'params' is initialised when looking up sys register Xiang Chen (1): scsi: hisi_sas: Replace in_softirq() check in hisi_sas_task_exec() Xiaolong Huang (1): can: kvaser_usb: kvaser_usb_leaf: Fix some info-leaks to USB devices Xin Long (1): sctp: fully initialize v4 addr in some functions Yang Shi (1): mm: move_pages: return valid node id in status if the page is already on the target node Yang Yingliang (1): media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init() Yangbo Lu (1): mmc: sdhci-of-esdhc: fix P2020 errata handling Yazen Ghannam (1): x86/MCE/AMD: Allow Reserved types to be overwritten in smca_banks[] Yizhuo (1): regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe() Yu-Hsuan Hsu (1): ASoC: Intel: kbl_rt5663_rt5514_max98927: Add dmic format constraint Yuming Han (1): tracing: use kvcalloc for tgid_map array allocation Yunfeng Ye (3): arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill() perf jevents: Fix resource leak in process_mapfile() and main() ACPI: sysfs: Change ACPI_MASKABLE_GPE_MAX to 0x100 Zhihao Cheng (1): ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps Zhiqiang Liu (1): md: raid1: check rdev before reference in raid1_sync_request func Zong Li (1): riscv: ftrace: correct the condition logic in function graph tracer chenqiwu (1): exit: panic before exit_mm() on global init exit peter chang (1): scsi: pm80xx: Fix for SATA device discovery Documentation/admin-guide/kernel-parameters.txt | 2 +- .../bindings/clock/renesas,rcar-usb2-clock-sel.txt | 2 +- Makefile | 2 +- arch/arm/boot/compressed/libfdt_env.h | 4 +- arch/arm/mm/proc-v7-bugs.c | 3 + .../arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 4 +- arch/arm64/include/asm/pgtable-prot.h | 5 +- arch/arm64/include/asm/pgtable.h | 10 +- arch/arm64/kernel/psci.c | 15 +- arch/arm64/kvm/sys_regs.c | 5 +- arch/arm64/mm/fault.c | 2 +- arch/mips/include/asm/pgtable-64.h | 9 +- arch/mips/include/asm/thread_info.h | 20 +- arch/powerpc/Makefile | 4 + arch/powerpc/boot/libfdt_env.h | 2 + arch/powerpc/include/asm/kvm_ppc.h | 100 +++++++- arch/powerpc/kernel/dbell.c | 6 +- arch/powerpc/kernel/irq.c | 4 +- arch/powerpc/kernel/security.c | 21 +- arch/powerpc/kernel/time.c | 2 +- arch/powerpc/kvm/book3s_hv_rm_xics.c | 2 +- arch/powerpc/mm/hash_utils_64.c | 10 +- arch/powerpc/platforms/powernv/smp.c | 2 +- arch/powerpc/platforms/pseries/cmm.c | 5 + arch/powerpc/platforms/pseries/hvconsole.c | 2 +- arch/powerpc/sysdev/xics/icp-native.c | 6 +- arch/powerpc/sysdev/xics/icp-opal.c | 6 +- arch/powerpc/tools/relocs_check.sh | 2 +- arch/powerpc/tools/unrel_branch_check.sh | 4 +- arch/riscv/kernel/ftrace.c | 2 +- arch/s390/include/asm/pgalloc.h | 16 +- arch/s390/include/asm/timex.h | 16 +- arch/s390/kernel/dis.c | 13 +- arch/s390/kernel/perf_cpum_sf.c | 39 ++- arch/s390/kernel/smp.c | 80 ++++-- arch/sh/include/cpu-sh4/cpu/sh7734.h | 2 +- arch/x86/events/intel/bts.c | 16 +- arch/x86/include/asm/crash.h | 2 + arch/x86/include/asm/fixmap.h | 2 +- arch/x86/include/asm/syscall_wrapper.h | 23 +- arch/x86/kernel/apic/io_apic.c | 9 +- arch/x86/kernel/cpu/mce/amd.c | 4 +- arch/x86/kernel/cpu/mce/core.c | 2 +- arch/x86/kernel/cpu/mce/therm_throt.c | 2 +- arch/x86/lib/x86-opcode-map.txt | 18 +- arch/x86/mm/pgtable.c | 4 +- block/compat_ioctl.c | 11 + drivers/acpi/button.c | 11 + drivers/acpi/sysfs.c | 6 +- drivers/ata/ahci_brcm.c | 140 ++++++++--- drivers/ata/libahci_platform.c | 6 +- drivers/ata/libata-core.c | 27 ++ drivers/ata/sata_fsl.c | 2 +- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_nv.c | 2 +- drivers/block/loop.c | 26 +- drivers/block/xen-blkback/blkback.c | 2 + drivers/block/xen-blkback/xenbus.c | 10 + drivers/bluetooth/btusb.c | 3 +- drivers/cdrom/cdrom.c | 12 +- drivers/char/hw_random/omap3-rom-rng.c | 3 +- drivers/char/ipmi/ipmi_msghandler.c | 23 +- drivers/clk/clk-gpio.c | 2 +- drivers/clk/pxa/clk-pxa27x.c | 1 + drivers/clk/qcom/clk-rcg2.c | 2 + drivers/clk/qcom/common.c | 3 + drivers/clocksource/asm9260_timer.c | 4 + drivers/clocksource/timer-of.c | 2 +- drivers/cpufreq/cpufreq.c | 7 + drivers/crypto/atmel-aes.c | 18 +- drivers/crypto/atmel-authenc.h | 2 +- drivers/crypto/atmel-sha.c | 2 +- drivers/crypto/sunxi-ss/sun4i-ss-cipher.c | 22 +- drivers/crypto/sunxi-ss/sun4i-ss-hash.c | 12 +- drivers/crypto/virtio/virtio_crypto_algs.c | 12 +- drivers/crypto/vmx/Makefile | 6 +- drivers/devfreq/devfreq.c | 30 +-- drivers/dma/xilinx/xilinx_dma.c | 1 + drivers/edac/ghes_edac.c | 10 +- drivers/extcon/extcon-sm5502.c | 4 + drivers/extcon/extcon-sm5502.h | 2 + drivers/firewire/net.c | 6 +- drivers/fsi/fsi-core.c | 31 ++- drivers/gpio/gpio-mpc8xxx.c | 3 +- drivers/gpio/gpiolib.c | 8 + drivers/gpu/drm/amd/amdgpu/amdgpu_test.c | 2 + drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c | 12 +- drivers/gpu/drm/amd/amdgpu/df_v3_6.c | 38 +-- drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 22 +- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 +- drivers/gpu/drm/amd/amdgpu/si_ih.c | 3 +- drivers/gpu/drm/amd/display/dc/core/dc_link.c | 4 +- drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 1 + drivers/gpu/drm/bridge/analogix-anx78xx.c | 8 +- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 12 +- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +- drivers/gpu/drm/drm_property.c | 2 +- drivers/gpu/drm/drm_vblank.c | 6 +- drivers/gpu/drm/gma500/oaktrail_crtc.c | 2 + drivers/gpu/drm/msm/msm_gpu.c | 1 + drivers/gpu/drm/nouveau/nouveau_connector.h | 110 ++++----- .../gpu/drm/panel/panel-raspberrypi-touchscreen.c | 1 + drivers/gpu/drm/panel/panel-sitronix-st7789v.c | 1 + drivers/gpu/drm/sun4i/sun4i_hdmi_enc.c | 2 - drivers/gpu/drm/tegra/sor.c | 5 + drivers/gpu/host1x/job.c | 11 +- drivers/hid/hid-core.c | 4 + drivers/hid/hid-ids.h | 1 + drivers/hid/hid-logitech-hidpp.c | 3 + drivers/hid/hid-quirks.c | 1 + drivers/hid/hid-rmi.c | 3 +- drivers/hid/i2c-hid/i2c-hid-core.c | 12 +- drivers/hwtracing/intel_th/pci.c | 10 + drivers/iio/adc/dln2-adc.c | 20 +- drivers/iio/adc/max1027.c | 8 + drivers/iio/adc/max9611.c | 16 +- drivers/iio/dac/Kconfig | 4 +- drivers/iio/dac/ad5446.c | 6 + drivers/iio/light/bh1750.c | 4 +- drivers/infiniband/core/cma.c | 1 + drivers/infiniband/hw/mlx4/main.c | 9 +- drivers/infiniband/hw/mlx5/main.c | 13 +- drivers/infiniband/hw/qedr/verbs.c | 12 +- drivers/infiniband/sw/rxe/rxe_recv.c | 2 +- drivers/infiniband/sw/rxe/rxe_req.c | 6 + drivers/infiniband/sw/rxe/rxe_resp.c | 7 + drivers/infiniband/ulp/iser/iscsi_iser.c | 1 + drivers/input/touchscreen/atmel_mxt_ts.c | 4 + drivers/iommu/rockchip-iommu.c | 7 +- drivers/iommu/tegra-smmu.c | 11 +- drivers/irqchip/irq-bcm7038-l1.c | 4 + drivers/irqchip/irq-ingenic.c | 15 +- drivers/leds/leds-lm3692x.c | 13 +- drivers/mailbox/imx-mailbox.c | 4 +- drivers/md/bcache/alloc.c | 5 +- drivers/md/bcache/bcache.h | 2 +- drivers/md/bcache/btree.c | 2 + drivers/md/bcache/super.c | 51 ++-- drivers/md/md-bitmap.c | 2 +- drivers/md/raid1.c | 2 +- drivers/media/cec/cec-adap.c | 40 ++- drivers/media/i2c/ov2659.c | 18 +- drivers/media/i2c/ov6650.c | 42 ++-- drivers/media/i2c/smiapp/smiapp-core.c | 12 +- drivers/media/pci/cx88/cx88-video.c | 11 +- drivers/media/platform/am437x/am437x-vpfe.c | 4 + drivers/media/platform/qcom/venus/core.c | 9 +- drivers/media/platform/qcom/venus/hfi_venus.c | 6 + drivers/media/platform/ti-vpe/vpdma.h | 1 + drivers/media/platform/ti-vpe/vpe.c | 52 ++-- drivers/media/radio/si470x/radio-si470x-i2c.c | 2 + drivers/media/usb/b2c2/flexcop-usb.c | 10 +- drivers/media/usb/pulse8-cec/pulse8-cec.c | 17 +- drivers/media/usb/pvrusb2/pvrusb2-v4l2.c | 9 +- drivers/media/v4l2-core/v4l2-ioctl.c | 33 +-- drivers/mmc/host/mtk-sd.c | 2 + drivers/mmc/host/sdhci-msm.c | 28 ++- drivers/mmc/host/sdhci-of-esdhc.c | 7 +- drivers/mmc/host/sdhci-pci-core.c | 10 +- drivers/mmc/host/sdhci.c | 11 +- drivers/mmc/host/sdhci.h | 2 + drivers/mmc/host/tmio_mmc_core.c | 2 +- drivers/net/bonding/bond_main.c | 3 - drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 6 +- drivers/net/dsa/Kconfig | 1 + drivers/net/ethernet/amazon/ena/ena_netdev.c | 10 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c | 16 +- drivers/net/ethernet/cortina/gemini.c | 2 + drivers/net/ethernet/hisilicon/hip04_eth.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_main.c | 10 +- drivers/net/ethernet/intel/ice/ice_controlq.c | 2 +- drivers/net/ethernet/intel/ice/ice_controlq.h | 5 +- drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +- drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 2 +- drivers/net/ethernet/mellanox/mlxfw/mlxfw_mfa2.c | 7 +- drivers/net/ethernet/qlogic/qede/qede_filter.c | 2 +- drivers/net/ethernet/qlogic/qede/qede_main.c | 4 +- drivers/net/ethernet/qlogic/qla3xxx.c | 8 +- .../net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 14 +- drivers/net/ethernet/ti/cpsw_ale.c | 2 + drivers/net/fjes/fjes_main.c | 3 + drivers/net/gtp.c | 111 +++++---- drivers/net/hamradio/6pack.c | 4 +- drivers/net/hamradio/mkiss.c | 4 +- drivers/net/phy/dp83867.c | 15 +- drivers/net/phy/phy_device.c | 4 +- drivers/net/tun.c | 4 +- drivers/net/usb/lan78xx.c | 1 + drivers/net/wireless/ath/ath10k/coredump.c | 11 +- drivers/net/wireless/ath/ath10k/mac.c | 26 +- drivers/net/wireless/ath/ath10k/txrx.c | 2 + drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 23 +- .../wireless/broadcom/brcm80211/brcmfmac/core.c | 5 + drivers/net/wireless/intel/iwlwifi/dvm/led.c | 3 + drivers/net/wireless/intel/iwlwifi/mvm/led.c | 3 + drivers/net/wireless/intel/iwlwifi/mvm/rx.c | 3 +- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.h | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_8723b.c | 1 + .../net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 3 + .../net/wireless/realtek/rtlwifi/rtl8192cu/hw.c | 2 + drivers/nvdimm/btt.c | 8 +- drivers/nvme/host/core.c | 12 +- drivers/nvme/host/fc.c | 32 ++- drivers/nvme/target/fcloop.c | 1 + drivers/nvmem/imx-ocotp.c | 4 + drivers/parport/share.c | 21 ++ drivers/pci/hotplug/rpaphp_core.c | 38 +-- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 7 +- drivers/pinctrl/devicetree.c | 25 +- drivers/pinctrl/intel/pinctrl-baytrail.c | 81 +++--- drivers/pinctrl/pinctrl-amd.c | 3 +- drivers/pinctrl/sh-pfc/pfc-sh7734.c | 4 +- drivers/platform/x86/hp-wmi.c | 2 +- drivers/platform/x86/pmc_atom.c | 8 + drivers/ptp/ptp_clock.c | 31 ++- drivers/ptp/ptp_private.h | 2 +- drivers/regulator/ab8500.c | 17 -- drivers/regulator/max8907-regulator.c | 15 +- drivers/s390/crypto/zcrypt_error.h | 2 + drivers/scsi/NCR5380.c | 6 +- drivers/scsi/atari_scsi.c | 6 +- drivers/scsi/csiostor/csio_lnode.c | 15 +- drivers/scsi/hisi_sas/hisi_sas_main.c | 8 +- drivers/scsi/iscsi_tcp.c | 8 + drivers/scsi/lpfc/lpfc_bsg.c | 15 +- drivers/scsi/lpfc/lpfc_els.c | 2 +- drivers/scsi/lpfc/lpfc_hbadisc.c | 7 +- drivers/scsi/lpfc/lpfc_nportdisc.c | 4 +- drivers/scsi/lpfc/lpfc_nvme.c | 2 + drivers/scsi/lpfc/lpfc_sli.c | 15 +- drivers/scsi/mac_scsi.c | 2 +- drivers/scsi/mpt3sas/mpt3sas_ctl.c | 3 +- drivers/scsi/pm8001/pm80xx_hwi.c | 2 + drivers/scsi/qedf/qedf_els.c | 16 +- drivers/scsi/qla2xxx/qla_init.c | 10 +- drivers/scsi/qla2xxx/qla_iocb.c | 6 +- drivers/scsi/qla2xxx/qla_isr.c | 4 - drivers/scsi/qla2xxx/qla_mbx.c | 3 +- drivers/scsi/qla2xxx/qla_nvme.c | 1 + drivers/scsi/qla2xxx/qla_target.c | 2 +- drivers/scsi/qla4xxx/ql4_os.c | 1 - drivers/scsi/scsi_debug.c | 5 + drivers/scsi/scsi_trace.c | 11 +- drivers/scsi/sun3_scsi.c | 4 +- drivers/scsi/ufs/ufshcd.c | 21 +- drivers/soundwire/intel.c | 10 +- drivers/spi/spi-fsl-spi.c | 7 +- drivers/spi/spi-img-spfi.c | 2 + drivers/spi/spi-pxa2xx.c | 6 + drivers/spi/spi-sprd-adi.c | 3 + drivers/spi/spi-st-ssc4.c | 3 + drivers/spi/spi-tegra20-slink.c | 5 +- drivers/spi/spidev.c | 3 + drivers/staging/comedi/drivers/gsc_hpdi.c | 10 + drivers/staging/fbtft/fbtft-core.c | 2 +- drivers/staging/rtl8188eu/core/rtw_xmit.c | 4 +- drivers/staging/rtl8192u/r8192U_core.c | 17 +- drivers/target/iscsi/iscsi_target.c | 10 +- drivers/target/iscsi/iscsi_target_auth.c | 2 +- drivers/tty/hvc/hvc_vio.c | 16 +- drivers/tty/serial/atmel_serial.c | 43 ++-- drivers/tty/serial/msm_serial.c | 13 +- drivers/usb/core/devio.c | 15 +- drivers/usb/gadget/function/f_ecm.c | 6 +- drivers/usb/gadget/function/f_rndis.c | 1 + drivers/usb/host/ehci-q.c | 13 +- drivers/usb/host/xhci-pci.c | 2 +- drivers/usb/renesas_usbhs/common.h | 3 +- drivers/usb/renesas_usbhs/mod_gadget.c | 12 +- drivers/usb/usbip/usbip_common.c | 3 + drivers/usb/usbip/vhci_rx.c | 13 +- drivers/vhost/vsock.c | 4 +- drivers/watchdog/watchdog_dev.c | 70 +++--- drivers/xen/Kconfig | 3 +- drivers/xen/balloon.c | 3 +- fs/afs/dynroot.c | 3 + fs/afs/server.c | 21 +- fs/afs/super.c | 1 - fs/block_dev.c | 37 +-- fs/btrfs/async-thread.c | 56 ++++- fs/btrfs/ctree.c | 2 +- fs/btrfs/ctree.h | 2 +- fs/btrfs/disk-io.c | 2 +- fs/btrfs/extent-tree.c | 7 +- fs/btrfs/extent_io.c | 6 +- fs/btrfs/file-item.c | 7 +- fs/btrfs/inode.c | 12 +- fs/btrfs/ioctl.c | 10 +- fs/btrfs/reada.c | 10 +- fs/btrfs/relocation.c | 1 + fs/btrfs/scrub.c | 3 +- fs/btrfs/send.c | 6 - fs/btrfs/tests/free-space-tree-tests.c | 4 +- fs/btrfs/tests/qgroup-tests.c | 4 +- fs/btrfs/tree-log.c | 52 +++- fs/btrfs/uuid-tree.c | 2 + fs/compat_ioctl.c | 3 +- fs/ext4/inode.c | 12 +- fs/f2fs/f2fs.h | 23 +- fs/f2fs/inode.c | 6 +- fs/f2fs/namei.c | 15 +- fs/jbd2/commit.c | 4 +- fs/locks.c | 2 +- fs/nfsd/nfs4state.c | 15 +- fs/ocfs2/acl.c | 4 +- fs/pstore/ram.c | 11 + fs/quota/dquot.c | 29 ++- fs/ubifs/tnc_commit.c | 34 ++- fs/userfaultfd.c | 18 +- fs/xfs/libxfs/xfs_bmap.c | 2 +- fs/xfs/scrub/common.h | 9 +- fs/xfs/xfs_log.c | 2 + include/drm/drm_dp_mst_helper.h | 2 +- include/linux/ahci_platform.h | 2 + include/linux/cpufreq.h | 11 - include/linux/dmaengine.h | 5 +- include/linux/hrtimer.h | 14 +- include/linux/ipmi_smi.h | 12 +- include/linux/libata.h | 1 + include/linux/libfdt_env.h | 3 + include/linux/miscdevice.h | 1 + include/linux/mod_devicetable.h | 4 +- include/linux/netdevice.h | 4 + include/linux/nvme-fc-driver.h | 4 + include/linux/posix-clock.h | 19 +- include/linux/quota.h | 2 +- include/linux/rculist_nulls.h | 37 +++ include/linux/regulator/ab8500.h | 1 - include/linux/sched/cpufreq.h | 3 + include/linux/skbuff.h | 6 +- include/net/dst.h | 15 +- include/net/dst_ops.h | 3 +- include/net/inet_hashtables.h | 12 +- include/net/neighbour.h | 2 +- include/net/sock.h | 5 + include/scsi/iscsi_proto.h | 1 + include/trace/events/wbt.h | 12 +- include/uapi/linux/cec-funcs.h | 6 +- kernel/bpf/stackmap.c | 7 +- kernel/cred.c | 6 +- kernel/dma/debug.c | 1 + kernel/exit.c | 12 +- kernel/power/snapshot.c | 9 +- kernel/sched/cpufreq.c | 18 ++ kernel/sched/cpufreq_schedutil.c | 8 +- kernel/sysctl.c | 2 +- kernel/taskstats.c | 30 ++- kernel/time/hrtimer.c | 11 +- kernel/time/posix-clock.c | 31 +-- kernel/trace/ftrace.c | 6 +- kernel/trace/trace.c | 10 +- kernel/trace/trace_events.c | 8 +- kernel/trace/trace_events_filter.c | 2 +- kernel/trace/trace_events_hist.c | 21 +- kernel/trace/trace_kprobe.c | 27 +- kernel/trace/tracing_map.c | 4 +- mm/migrate.c | 23 +- mm/mmap.c | 6 - mm/zsmalloc.c | 5 + net/bluetooth/hci_conn.c | 12 +- net/bluetooth/hci_core.c | 13 +- net/bluetooth/hci_request.c | 9 + net/bluetooth/l2cap_core.c | 4 +- net/bridge/br_netfilter_hooks.c | 3 + net/bridge/br_nf_core.c | 3 +- net/bridge/netfilter/ebtables.c | 33 ++- net/core/dev.c | 272 +++++++++++++++++---- net/core/neighbour.c | 4 +- net/core/sysctl_net_core.c | 2 + net/decnet/dn_route.c | 6 +- net/ethernet/eth.c | 7 +- net/ipv4/icmp.c | 11 +- net/ipv4/inet_connection_sock.c | 2 +- net/ipv4/inet_diag.c | 3 +- net/ipv4/inet_hashtables.c | 19 +- net/ipv4/inetpeer.c | 12 +- net/ipv4/ip_tunnel.c | 2 +- net/ipv4/ip_vti.c | 2 +- net/ipv4/route.c | 9 +- net/ipv4/tcp_ipv4.c | 7 +- net/ipv4/tcp_output.c | 11 + net/ipv4/udp.c | 2 +- net/ipv4/xfrm4_policy.c | 5 +- net/ipv6/inet6_connection_sock.c | 2 +- net/ipv6/inet6_hashtables.c | 3 +- net/ipv6/ip6_gre.c | 2 +- net/ipv6/ip6_tunnel.c | 4 +- net/ipv6/ip6_vti.c | 2 +- net/ipv6/route.c | 22 +- net/ipv6/sit.c | 2 +- net/ipv6/xfrm6_policy.c | 5 +- net/mac80211/status.c | 3 +- net/netfilter/ipvs/ip_vs_xmit.c | 2 +- net/netfilter/nf_queue.c | 2 +- net/netfilter/nft_tproxy.c | 4 +- net/nfc/nci/uart.c | 2 +- net/rfkill/core.c | 9 +- net/rxrpc/peer_event.c | 3 + net/sctp/protocol.c | 5 + net/sctp/transport.c | 2 +- net/socket.c | 4 +- samples/pktgen/functions.sh | 17 +- scripts/kallsyms.c | 2 + security/apparmor/apparmorfs.c | 2 +- security/apparmor/domain.c | 82 ++++--- security/apparmor/label.c | 12 +- security/apparmor/policy.c | 4 +- sound/core/pcm_native.c | 4 + sound/core/timer.c | 10 + sound/firewire/motu/motu-proc.c | 2 +- sound/isa/cs423x/cs4236.c | 3 +- sound/pci/hda/hda_controller.c | 2 +- sound/pci/hda/patch_ca0132.c | 23 +- sound/pci/hda/patch_realtek.c | 61 ++++- sound/pci/ice1712/ice1724.c | 9 +- sound/soc/codecs/rt5677.c | 1 + sound/soc/codecs/wm2200.c | 5 + sound/soc/codecs/wm5100.c | 2 + sound/soc/codecs/wm8904.c | 1 + sound/soc/intel/boards/bytcr_rt5640.c | 10 +- .../soc/intel/boards/kbl_rt5663_rt5514_max98927.c | 3 + sound/usb/card.h | 1 + sound/usb/pcm.c | 25 +- sound/usb/quirks-table.h | 3 +- sound/usb/quirks.c | 11 + sound/usb/usbaudio.h | 3 +- tools/lib/bpf/libbpf.c | 14 +- tools/lib/subcmd/Makefile | 4 +- tools/lib/traceevent/parse-filter.c | 9 +- tools/objtool/arch/x86/lib/x86-opcode-map.txt | 18 +- tools/perf/builtin-report.c | 7 + tools/perf/builtin-script.c | 2 +- tools/perf/pmu-events/jevents.c | 13 +- tools/perf/tests/bp_signal.c | 15 +- tools/perf/tests/task-exit.c | 1 + tools/perf/util/dwarf-aux.c | 80 ++++-- tools/perf/util/dwarf-aux.h | 3 + tools/perf/util/parse-events.c | 26 +- tools/perf/util/perf_regs.h | 2 +- tools/perf/util/probe-finder.c | 45 +++- .../cpupower/utils/idle_monitor/hsw_ext_idle.c | 1 - tools/testing/selftests/bpf/cgroup_helpers.c | 2 +- .../selftests/net/forwarding/router_bridge_vlan.sh | 2 +- tools/testing/selftests/net/rtnetlink.sh | 21 ++ tools/testing/selftests/rseq/param_test.c | 18 +- 445 files changed, 3473 insertions(+), 1466 deletions(-) -- 1.8.3

1 429

[PATCH] sock: fix potential memory leak in proto_register()
by Yang Yingliang 16 Jan '20

16 Jan '20

From: zhanglin <zhang.lin16(a)zte.com.cn> mainline inclusion from mainline-v5.3-rc7 commit b45ce32135d1c82a5bf12aa56957c3fd27956057 category: bugfix bugzilla: 20825 CVE: NA ------------------------------------- If protocols registered exceeded PROTO_INUSE_NR, prot will be added to proto_list, but no available bit left for prot in proto_inuse_idx. Changes since v2: * Propagate the error code properly Signed-off-by: zhanglin <zhang.lin16(a)zte.com.cn> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: guodeqing <geffrey.guo(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/core/sock.c | 31 +++++++++++++++++++++---------- 1 file changed, 21 insertions(+), 10 deletions(-) diff --git a/net/core/sock.c b/net/core/sock.c index f0b4657..910d0e0 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -3216,16 +3216,17 @@ static __init int net_inuse_init(void) core_initcall(net_inuse_init); -static void assign_proto_idx(struct proto *prot) +static int assign_proto_idx(struct proto *prot) { prot->inuse_idx = find_first_zero_bit(proto_inuse_idx, PROTO_INUSE_NR); if (unlikely(prot->inuse_idx == PROTO_INUSE_NR - 1)) { pr_err("PROTO_INUSE_NR exhausted\n"); - return; + return -ENOSPC; } set_bit(prot->inuse_idx, proto_inuse_idx); + return 0; } static void release_proto_idx(struct proto *prot) @@ -3234,8 +3235,9 @@ static void release_proto_idx(struct proto *prot) clear_bit(prot->inuse_idx, proto_inuse_idx); } #else -static inline void assign_proto_idx(struct proto *prot) +static inline int assign_proto_idx(struct proto *prot) { + return 0; } static inline void release_proto_idx(struct proto *prot) @@ -3284,6 +3286,8 @@ static int req_prot_init(const struct proto *prot) int proto_register(struct proto *prot, int alloc_slab) { + int ret = -ENOBUFS; + if (alloc_slab) { prot->slab = kmem_cache_create_usercopy(prot->name, prot->obj_size, 0, @@ -3320,20 +3324,27 @@ int proto_register(struct proto *prot, int alloc_slab) } mutex_lock(&proto_list_mutex); + ret = assign_proto_idx(prot); + if (ret) { + mutex_unlock(&proto_list_mutex); + goto out_free_timewait_sock_slab_name; + } list_add(&prot->node, &proto_list); - assign_proto_idx(prot); mutex_unlock(&proto_list_mutex); - return 0; + return ret; out_free_timewait_sock_slab_name: - kfree(prot->twsk_prot->twsk_slab_name); + if (alloc_slab && prot->twsk_prot) + kfree(prot->twsk_prot->twsk_slab_name); out_free_request_sock_slab: - req_prot_cleanup(prot->rsk_prot); + if (alloc_slab) { + req_prot_cleanup(prot->rsk_prot); - kmem_cache_destroy(prot->slab); - prot->slab = NULL; + kmem_cache_destroy(prot->slab); + prot->slab = NULL; + } out: - return -ENOBUFS; + return ret; } EXPORT_SYMBOL(proto_register); -- 1.8.3

1 0

[PATCH] arm64/sve: Fix missing SVE/FPSIMD endianness conversions
by Yang Yingliang 16 Jan '20

16 Jan '20

From: Dave Martin <Dave.Martin(a)arm.com> mainline inclusion from mainline-5.2-rc5 commit 41040cf7c5f0 category: bugfix bugzilla: 27454 CVE: NA ------------------------------------------------- The in-memory representation of SVE and FPSIMD registers is different: the FPSIMD V-registers are stored as single 128-bit host-endian values, whereas SVE registers are stored in an endianness-invariant byte order. This means that the two representations differ when running on a big-endian host. But we blindly copy data from one representation to another when converting between the two, resulting in the register contents being unintentionally byteswapped in certain situations. Currently this can be triggered by the first SVE instruction after a syscall, for example (though the potential trigger points may vary in future). So, fix the conversion functions fpsimd_to_sve(), sve_to_fpsimd() and sve_sync_from_fpsimd_zeropad() to swab where appropriate. There is no common swahl128() or swab128() that we could use here. Maybe it would be worth making this generic, but for now add a simple local hack. Since the byte order differences are exposed in ABI, also clarify the documentation. Cc: Alex Bennée <alex.bennee(a)linaro.org> Cc: Peter Maydell <peter.maydell(a)linaro.org> Cc: Alan Hayward <alan.hayward(a)arm.com> Cc: Julien Grall <julien.grall(a)arm.com> Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Fixes: 8cd969d28fd2 ("arm64/sve: Signal handling support") Fixes: 43d4da2c45b2 ("arm64/sve: ptrace and ELF coredump support") Signed-off-by: Dave Martin <Dave.Martin(a)arm.com> [will: Fix typos in comments and docs spotted by Julien] Signed-off-by: Will Deacon <will.deacon(a)arm.com> Confilicts: arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/ptrace.h arch/arm64/include/uapi/asm/sigcontext.h Signed-off-by: Chen Zhou <chenzhou10(a)huawei.com> Reviewed-by: Xuefeng Wang <wxf.wang(a)hisilicon.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- Documentation/arm64/sve.txt | 16 ++++++++++++ arch/arm64/include/uapi/asm/ptrace.h | 4 +++ arch/arm64/include/uapi/asm/sigcontext.h | 14 +++++++++++ arch/arm64/kernel/fpsimd.c | 42 +++++++++++++++++++++++++------- 4 files changed, 67 insertions(+), 9 deletions(-) diff --git a/Documentation/arm64/sve.txt b/Documentation/arm64/sve.txt index 7169a0e..2001d84 100644 --- a/Documentation/arm64/sve.txt +++ b/Documentation/arm64/sve.txt @@ -39,6 +39,18 @@ model features for SVE is included in Appendix A. is to connect to a target process first and then attempt a ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov). +* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory + between userspace and the kernel, the register value is encoded in memory in + an endianness-invariant layout, with bits [(8 * i + 7) : (8 * i)] encoded at + byte offset i from the start of the memory representation. This affects for + example the signal frame (struct sve_context) and ptrace interface + (struct user_sve_header) and associated data. + + Beware that on big-endian systems this results in a different byte order than + for the FPSIMD V-registers, which are stored as single host-endian 128-bit + values, with bits [(127 - 8 * i) : (120 - 8 * i)] of the register encoded at + byte offset i. (struct fpsimd_context, struct user_fpsimd_state). + 2. Vector length terminology ----------------------------- @@ -107,6 +119,10 @@ the SVE instruction set architecture. size and layout. Macros SVE_SIG_* are defined [1] to facilitate access to the members. +* Each scalable register (Zn, Pn, FFR) is stored in an endianness-invariant + layout, with bits [(8 * i + 7) : (8 * i)] stored at byte offset i from the + start of the register's representation in memory. + * If the SVE context is too big to fit in sigcontext.__reserved[], then extra space is allocated on the stack, an extra_context record is written in __reserved[] referencing this space. sve_context is then written in the diff --git a/arch/arm64/include/uapi/asm/ptrace.h b/arch/arm64/include/uapi/asm/ptrace.h index b0fd1d3..0102234 100644 --- a/arch/arm64/include/uapi/asm/ptrace.h +++ b/arch/arm64/include/uapi/asm/ptrace.h @@ -174,6 +174,10 @@ struct user_sve_header { * FPCR uint32_t FPCR * * Additional data might be appended in the future. + * + * The Z-, P- and FFR registers are represented in memory in an endianness- + * invariant layout which differs from the layout used for the FPSIMD + * V-registers on big-endian systems: see sigcontext.h for more explanation. */ #define SVE_PT_SVE_ZREG_SIZE(vq) SVE_SIG_ZREG_SIZE(vq) diff --git a/arch/arm64/include/uapi/asm/sigcontext.h b/arch/arm64/include/uapi/asm/sigcontext.h index dca8f8b..7498e41 100644 --- a/arch/arm64/include/uapi/asm/sigcontext.h +++ b/arch/arm64/include/uapi/asm/sigcontext.h @@ -77,6 +77,15 @@ struct fpsimd_context { __uint128_t vregs[32]; }; +/* + * Note: similarly to all other integer fields, each V-register is stored in an + * endianness-dependent format, with the byte at offset i from the start of the + * in-memory representation of the register value containing + * + * bits [(7 + 8 * i) : (8 * i)] of the register on little-endian hosts; or + * bits [(127 - 8 * i) : (120 - 8 * i)] on big-endian hosts. + */ + /* ESR_EL1 context */ #define ESR_MAGIC 0x45535201 @@ -203,6 +212,11 @@ struct sve_context { * FFR uint16_t[vq] first-fault status register * * Additional data might be appended in the future. + * + * Unlike vregs[] in fpsimd_context, each SVE scalable register (Z-, P- or FFR) + * is encoded in memory in an endianness-invariant format, with the byte at + * offset i from the start of the in-memory representation containing bits + * [(7 + 8 * i) : (8 * i)] of the register value. */ #define SVE_SIG_ZREG_SIZE(vq) ((__u32)(vq) * SVE_VQ_BYTES) diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c index 58c53bc..ad56eaf 100644 --- a/arch/arm64/kernel/fpsimd.c +++ b/arch/arm64/kernel/fpsimd.c @@ -38,6 +38,7 @@ #include <linux/slab.h> #include <linux/stddef.h> #include <linux/sysctl.h> +#include <linux/swab.h> #include <asm/esr.h> #include <asm/fpsimd.h> @@ -355,6 +356,23 @@ static int __init sve_sysctl_init(void) #define ZREG(sve_state, vq, n) ((char *)(sve_state) + \ (SVE_SIG_ZREG_OFFSET(vq, n) - SVE_SIG_REGS_OFFSET)) +#ifdef CONFIG_CPU_BIG_ENDIAN +static __uint128_t arm64_cpu_to_le128(__uint128_t x) +{ + u64 a = swab64(x); + u64 b = swab64(x >> 64); + + return ((__uint128_t)a << 64) | b; +} +#else +static __uint128_t arm64_cpu_to_le128(__uint128_t x) +{ + return x; +} +#endif + +#define arm64_le128_to_cpu(x) arm64_cpu_to_le128(x) + /* * Transfer the FPSIMD state in task->thread.uw.fpsimd_state to * task->thread.sve_state. @@ -372,14 +390,16 @@ static void fpsimd_to_sve(struct task_struct *task) void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; unsigned int i; + __uint128_t *p; if (!system_supports_sve()) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) - memcpy(ZREG(sst, vq, i), &fst->vregs[i], - sizeof(fst->vregs[i])); + for (i = 0; i < 32; ++i) { + p = (__uint128_t *)ZREG(sst, vq, i); + *p = arm64_cpu_to_le128(fst->vregs[i]); + } } /* @@ -398,14 +418,16 @@ static void sve_to_fpsimd(struct task_struct *task) void const *sst = task->thread.sve_state; struct user_fpsimd_state *fst = &task->thread.uw.fpsimd_state; unsigned int i; + __uint128_t const *p; if (!system_supports_sve()) return; vq = sve_vq_from_vl(task->thread.sve_vl); - for (i = 0; i < 32; ++i) - memcpy(&fst->vregs[i], ZREG(sst, vq, i), - sizeof(fst->vregs[i])); + for (i = 0; i < 32; ++i) { + p = (__uint128_t const *)ZREG(sst, vq, i); + fst->vregs[i] = arm64_le128_to_cpu(*p); + } } #ifdef CONFIG_ARM64_SVE @@ -494,6 +516,7 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) void *sst = task->thread.sve_state; struct user_fpsimd_state const *fst = &task->thread.uw.fpsimd_state; unsigned int i; + __uint128_t *p; if (!test_tsk_thread_flag(task, TIF_SVE)) return; @@ -502,9 +525,10 @@ void sve_sync_from_fpsimd_zeropad(struct task_struct *task) memset(sst, 0, SVE_SIG_REGS_SIZE(vq)); - for (i = 0; i < 32; ++i) - memcpy(ZREG(sst, vq, i), &fst->vregs[i], - sizeof(fst->vregs[i])); + for (i = 0; i < 32; ++i) { + p = (__uint128_t *)ZREG(sst, vq, i); + *p = arm64_cpu_to_le128(fst->vregs[i]); + } } int sve_set_vector_length(struct task_struct *task, -- 1.8.3

1 0

[PATCH 0/3] Some fixes for SVM
by Yang Yingliang 16 Jan '20

16 Jan '20

Lijun Fang (3): svm: Fix unpin_memory calculate nr_pages error svm: Delete svm_unbind_cores() in svm_notifier_release call svm: Delete ifdef CONFIG_ACPI in svm drivers/char/svm.c | 234 ++++++++++++++++++++++++++--------------------------- 1 file changed, 113 insertions(+), 121 deletions(-) -- 1.8.3

1 3

[all] We should provider more concrete spec files for projects
by Liyongle (Fred) 16 Jan '20

16 Jan '20

Hi all, Please read [1] to get the request that all the PR should detail the changes so that users/developers can understand the context. [1] https://gitee.com/open_euler/dashboard/issues?sort=updated_at%20desc&id=I18… Fred 李永乐

1 0

[PATCH] vrf: Do not attempt to create IPv6 mcast rule if IPv6 is disabled
by Yang Yingliang 16 Jan '20

16 Jan '20

From: David Ahern <dsahern(a)gmail.com> mainline inclusion from mainline-v5.4-rc1 commit dac91170f8e9c73784af5fad6225e954b795601c category: bugfix bugzilla: 23512 CVE: NA ------------------------------------- A user reported that vrf create fails when IPv6 is disabled at boot using 'ipv6.disable=1': https://bugzilla.kernel.org/show_bug.cgi?id=204903 The failure is adding fib rules at create time. Add RTNL_FAMILY_IP6MR to the check in vrf_fib_rule if ipv6_mod_enabled is disabled. Fixes: e4a38c0c4b27 ("ipv6: add vrf table handling code for ipv6 mcast") Signed-off-by: David Ahern <dsahern(a)gmail.com> Cc: Patrick Ruddy <pruddy(a)vyatta.att-mail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: guodeqing <geffrey.guo(a)huawei.com> Reviewed-by: Wenan Mao <maowenan(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/vrf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/vrf.c b/drivers/net/vrf.c index af7b809..f94b4f4 100644 --- a/drivers/net/vrf.c +++ b/drivers/net/vrf.c @@ -1158,7 +1158,8 @@ static int vrf_fib_rule(const struct net_device *dev, __u8 family, bool add_it) struct sk_buff *skb; int err; - if (family == AF_INET6 && !ipv6_mod_enabled()) + if ((family == AF_INET6 || family == RTNL_FAMILY_IP6MR) && + !ipv6_mod_enabled()) return 0; skb = nlmsg_new(vrf_fib_rule_nl_size(), GFP_KERNEL); -- 1.8.3

1 0

[PATCH] iommu: Add missing new line for dma type
by Yang Yingliang 16 Jan '20

16 Jan '20

From: Lu Baolu <baolu.lu(a)linux.intel.com> mainline inclusion from mainline-5.2-rc5 commit 24f307d8abf7 category: bugfix bugzilla: 16865 CVE: NA ------------------------------------------------- So that all types are printed in the same format. Fixes: c52c72d3dee81 ("iommu: Add sysfs attribyte for domain type") Signed-off-by: Lu Baolu <baolu.lu(a)linux.intel.com> Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Zhen Lei <thunder.leizhen(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/iommu/iommu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index c558fda..b7b0105 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -327,7 +327,7 @@ static ssize_t iommu_group_show_type(struct iommu_group *group, type = "unmanaged\n"; break; case IOMMU_DOMAIN_DMA: - type = "DMA"; + type = "DMA\n"; break; } } -- 1.8.3

1 0

[PATCH 00/45] Backport patches from Linux-4.19.91
by Yang Yingliang 16 Jan '20

16 Jan '20

Merge 45 patches from 4.19.91 stable branch (48 total) beside 3 already merged patches: 248e65f PCI: pciehp: Avoid returning prematurely from sysfs requests 6970c15 dm btree: increase rebalance threshold in __rebalance2() 5dc3f40 scsi: qla2xxx: Change discovery state before PLOGI Aaron Conole (1): openvswitch: support asymmetric conntrack Alex Deucher (1): drm/radeon: fix r1xx/r2xx register checker for POT textures Alexander Lobakin (1): net: dsa: fix flow dissection on Tx path Arun Kumar Neelakantam (2): rpmsg: glink: Fix reuse intents memory leak issue rpmsg: glink: Fix use after free in open_ack TIMEOUT case Bart Van Assche (1): scsi: iscsi: Fix a potential deadlock in the timeout handler Bjorn Andersson (2): rpmsg: glink: Don't send pending rx_done during remove rpmsg: glink: Free pending deferred work on remove Chaotian Jing (2): mmc: block: Make card_busy_detect() a bit more generic mmc: block: Add CMD13 polling for MMC IOCTLS with R1B response Chris Lew (3): rpmsg: glink: Set tail pointer to 0 at end of FIFO rpmsg: glink: Put an extra reference during cleanup rpmsg: glink: Fix rpmsg_register_device err handling Dexuan Cui (1): PCI/PM: Always return devices to D0 when thawing Dmitry Osipenko (1): ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume() Dust Li (1): net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueues Eric Dumazet (2): inet: protect against too small mtu values. tcp: md5: fix potential overestimation of TCP option space George Cherian (1): PCI: Apply Cavium ACS quirk to ThunderX2 and ThunderX3 Greg Kroah-Hartman (2): Revert "arm64: preempt: Fix big-endian when checking preempt count in assembly" Linux 4.19.91 Grygorii Strashko (1): net: ethernet: ti: cpsw: fix extra rx interrupt Guillaume Nault (3): tcp: fix rejected syncookies due to stale timestamps tcp: tighten acceptance of ACKs not matching a child socket tcp: Protect accesses to .ts_recent_stamp with {READ, WRITE}_ONCE() Huy Nguyen (1): net/mlx5e: Query global pause state before setting prio2buffer Jian-Hong Pan (1): PCI/MSI: Fix incorrect MSI-X masking on resume Jiang Yi (1): vfio/pci: call irq_bypass_unregister_producer() before freeing irq Lihua Yao (1): ARM: dts: s3c64xx: Fix init order of clock providers Long Li (4): cifs: smbd: Return -EAGAIN when transport is reconnecting cifs: smbd: Add messages on RDMA session destroy and reconnection cifs: smbd: Return -EINVAL when the number of iovs exceeds SMBDIRECT_MAX_SGE cifs: Don't display RDMA transport on reconnect Martin Blumenstingl (1): drm: meson: venc: cvbs: fix CVBS mode matching Mathias Nyman (1): xhci: fix USB3 device initiated resume race with roothub autosuspend Max Filippov (1): xtensa: fix TLB sanity checker Mian Yousaf Kaukab (1): net: thunderx: start phy before starting autonegotiation Mike Snitzer (1): dm mpath: remove harmful bio-based optimization Navid Emamdoost (1): dma-buf: Fix memory leak in sync_file_merge() Nikolay Aleksandrov (1): net: bridge: deny dev_set_mac_address() when unregistering Pavel Shilovsky (2): CIFS: Respect O_SYNC and O_DIRECT flags during reconnect CIFS: Close open handle after interrupted close Steffen Liebergeld (1): PCI: Fix Intel ACS quirk UPDCR register address Taehee Yoo (1): tipc: fix ordering of tipc module init and exit routine Vladyslav Tarasiuk (1): mqprio: Fix out-of-bounds access in mqprio_dump Makefile | 2 +- arch/arm/boot/dts/s3c6410-mini6410.dts | 4 + arch/arm/boot/dts/s3c6410-smdk6410.dts | 4 + arch/arm/mach-tegra/reset-handler.S | 6 +- arch/arm64/include/asm/assembler.h | 8 +- arch/arm64/kernel/entry.S | 8 +- arch/xtensa/mm/tlb.c | 4 +- drivers/dma-buf/sync_file.c | 2 +- drivers/gpu/drm/meson/meson_venc_cvbs.c | 48 ++++--- drivers/gpu/drm/radeon/r100.c | 4 +- drivers/gpu/drm/radeon/r200.c | 4 +- drivers/md/dm-mpath.c | 37 +---- drivers/mmc/core/block.c | 151 ++++++++------------- drivers/net/ethernet/cavium/thunder/thunder_bgx.c | 2 +- .../ethernet/mellanox/mlx5/core/en/port_buffer.c | 27 +++- drivers/net/ethernet/ti/cpsw.c | 2 +- drivers/pci/msi.c | 2 +- drivers/pci/pci-driver.c | 17 ++- drivers/pci/quirks.c | 22 +-- drivers/rpmsg/qcom_glink_native.c | 53 ++++++-- drivers/rpmsg/qcom_glink_smem.c | 2 +- drivers/scsi/libiscsi.c | 4 +- drivers/usb/host/xhci-hub.c | 8 ++ drivers/usb/host/xhci-ring.c | 3 +- drivers/vfio/pci/vfio_pci_intrs.c | 2 +- fs/cifs/cifs_debug.c | 5 + fs/cifs/file.c | 7 + fs/cifs/smb2misc.c | 59 ++++++-- fs/cifs/smb2pdu.c | 16 ++- fs/cifs/smb2proto.h | 3 + fs/cifs/smbdirect.c | 8 +- fs/cifs/transport.c | 7 +- include/linux/netdevice.h | 5 + include/linux/time.h | 13 ++ include/net/ip.h | 5 + include/net/tcp.h | 27 ++-- net/bridge/br_device.c | 6 + net/core/dev.c | 3 +- net/core/flow_dissector.c | 5 +- net/ipv4/devinet.c | 5 - net/ipv4/ip_output.c | 13 +- net/ipv4/tcp_output.c | 5 +- net/openvswitch/conntrack.c | 11 ++ net/sched/sch_mq.c | 1 + net/sched/sch_mqprio.c | 3 +- net/tipc/core.c | 29 ++-- 46 files changed, 400 insertions(+), 262 deletions(-) -- 1.8.3

1 45

[PATCH] ext4: check for directory entries too close to block end
by Yang Yingliang 16 Jan '20

16 Jan '20

From: Jan Kara <jack(a)suse.cz> commit 109ba779d6cca2d519c5dd624a3276d03e21948e upstream. ext4_check_dir_entry() currently does not catch a case when a directory entry ends so close to the block end that the header of the next directory entry would not fit in the remaining space. This can lead to directory iteration code trying to access address beyond end of current buffer head leading to oops. CC: stable(a)vger.kernel.org Signed-off-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20191202170213.4761-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/dir.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index 46d5c40..d947c5e 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -77,6 +77,11 @@ int __ext4_check_dir_entry(const char *function, unsigned int line, error_msg = "rec_len is too small for name_len"; else if (unlikely(((char *) de - buf) + rlen > size)) error_msg = "directory entry overrun"; + else if (unlikely(((char *) de - buf) + rlen > + size - EXT4_DIR_REC_LEN(1) && + ((char *) de - buf) + rlen != size)) { + error_msg = "directory entry too close to block end"; + } else if (unlikely(le32_to_cpu(de->inode) > le32_to_cpu(EXT4_SB(dir->i_sb)->s_es->s_inodes_count))) error_msg = "inode out of bounds"; -- 1.8.3

1 0

[PATCH] ext4: fix ext4_empty_dir() for directories with holes
by Yang Yingliang 16 Jan '20

16 Jan '20

From: Jan Kara <jack(a)suse.cz> commit 64d4ce892383b2ad6d782e080d25502f91bf2a38 upstream. Function ext4_empty_dir() doesn't correctly handle directories with holes and crashes on bh->b_data dereference when bh is NULL. Reorganize the loop to use 'offset' variable all the times instead of comparing pointers to current direntry with bh->b_data pointer. Also add more strict checking of '.' and '..' directory entries to avoid entering loop in possibly invalid state on corrupted filesystems. References: CVE-2019-19037 CC: stable(a)vger.kernel.org Fixes: 4e19d6b65fb4 ("ext4: allow directory holes") Signed-off-by: Jan Kara <jack(a)suse.cz> Link: https://lore.kernel.org/r/20191202170213.4761-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/namei.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index f56d6f1..43dcb91 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2693,7 +2693,7 @@ bool ext4_empty_dir(struct inode *inode) { unsigned int offset; struct buffer_head *bh; - struct ext4_dir_entry_2 *de, *de1; + struct ext4_dir_entry_2 *de; struct super_block *sb; if (ext4_has_inline_data(inode)) { @@ -2718,19 +2718,25 @@ bool ext4_empty_dir(struct inode *inode) return true; de = (struct ext4_dir_entry_2 *) bh->b_data; - de1 = ext4_next_entry(de, sb->s_blocksize); - if (le32_to_cpu(de->inode) != inode->i_ino || - le32_to_cpu(de1->inode) == 0 || - strcmp(".", de->name) || strcmp("..", de1->name)) { - ext4_warning_inode(inode, "directory missing '.' and/or '..'"); + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, + 0) || + le32_to_cpu(de->inode) != inode->i_ino || strcmp(".", de->name)) { + ext4_warning_inode(inode, "directory missing '.'"); + brelse(bh); + return true; + } + offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); + de = ext4_next_entry(de, sb->s_blocksize); + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, + offset) || + le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) { + ext4_warning_inode(inode, "directory missing '..'"); brelse(bh); return true; } - offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize) + - ext4_rec_len_from_disk(de1->rec_len, sb->s_blocksize); - de = ext4_next_entry(de1, sb->s_blocksize); + offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); while (offset < inode->i_size) { - if ((void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { + if (!(offset & (sb->s_blocksize - 1))) { unsigned int lblock; brelse(bh); lblock = offset >> EXT4_BLOCK_SIZE_BITS(sb); @@ -2741,12 +2747,11 @@ bool ext4_empty_dir(struct inode *inode) } if (IS_ERR(bh)) return true; - de = (struct ext4_dir_entry_2 *) bh->b_data; } + de = (struct ext4_dir_entry_2 *) (bh->b_data + + (offset & (sb->s_blocksize - 1))); if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, offset)) { - de = (struct ext4_dir_entry_2 *)(bh->b_data + - sb->s_blocksize); offset = (offset | (sb->s_blocksize - 1)) + 1; continue; } @@ -2755,7 +2760,6 @@ bool ext4_empty_dir(struct inode *inode) return false; } offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); - de = ext4_next_entry(de, sb->s_blocksize); } brelse(bh); return true; -- 1.8.3

1 0

[PATCH] KVM: arm/arm64: vgic: Replace spin_is_locked() with lockdep
by Yang Yingliang 14 Jan '20

14 Jan '20

From: Lance Roy <ldr709(a)gmail.com> mainline inclusion from mainline-v5.0-rc1 commit d4d592a6eeda1e381f38f398e7a0474a599c11ed category: feature feature: convert assertions of spin_is_locked() into lockdep_assert_held() ------------------------------------------------- lockdep_assert_held() is better suited to checking locking requirements, since it only checks if the current thread holds the lock regardless of whether someone else does. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709(a)gmail.com> Cc: Marc Zyngier <marc.zyngier(a)arm.com> Cc: Eric Auger <eric.auger(a)redhat.com> Cc: linux-arm-kernel(a)lists.infradead.org Cc: <kvmarm(a)lists.cs.columbia.edu> Signed-off-by: Paul E. McKenney <paulmck(a)linux.ibm.com> Acked-by: Christoffer Dall <christoffer.dall(a)arm.com> Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> Reviewed-by: Hailiang Zhang <zhang.zhanghailiang(a)huawei.com> Signed-off-by: Lance Roy <ldr709(a)gmail.com> Signed-off-by: Paul E. McKenney <paulmck(a)linux.ibm.com> Acked-by: Christoffer Dall <christoffer.dall(a)arm.com> Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- virt/kvm/arm/vgic/vgic.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/virt/kvm/arm/vgic/vgic.c b/virt/kvm/arm/vgic/vgic.c index 4040a33..d3ce29f 100644 --- a/virt/kvm/arm/vgic/vgic.c +++ b/virt/kvm/arm/vgic/vgic.c @@ -196,7 +196,7 @@ void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active) */ static struct kvm_vcpu *vgic_target_oracle(struct vgic_irq *irq) { - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&irq->irq_lock)); + lockdep_assert_held(&irq->irq_lock); /* If the interrupt is active, it must stay on the current vcpu */ if (irq->active) @@ -280,7 +280,7 @@ static void vgic_sort_ap_list(struct kvm_vcpu *vcpu) { struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu; - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&vgic_cpu->ap_list_lock)); + lockdep_assert_held(&vgic_cpu->ap_list_lock); list_sort(NULL, &vgic_cpu->ap_list_head, vgic_irq_cmp); } @@ -318,7 +318,7 @@ bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq, { struct kvm_vcpu *vcpu; - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&irq->irq_lock)); + lockdep_assert_held(&irq->irq_lock); retry: vcpu = vgic_target_oracle(irq); @@ -709,7 +709,7 @@ static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu) static inline void vgic_populate_lr(struct kvm_vcpu *vcpu, struct vgic_irq *irq, int lr) { - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&irq->irq_lock)); + lockdep_assert_held(&irq->irq_lock); if (kvm_vgic_global_state.type == VGIC_V2) vgic_v2_populate_lr(vcpu, irq, lr); @@ -743,7 +743,7 @@ static int compute_ap_list_depth(struct kvm_vcpu *vcpu, *multi_sgi = false; - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&vgic_cpu->ap_list_lock)); + lockdep_assert_held(&vgic_cpu->ap_list_lock); list_for_each_entry(irq, &vgic_cpu->ap_list_head, ap_list) { int w; @@ -768,7 +768,7 @@ static void vgic_flush_lr_state(struct kvm_vcpu *vcpu) bool multi_sgi; u8 prio = 0xff; - DEBUG_SPINLOCK_BUG_ON(!spin_is_locked(&vgic_cpu->ap_list_lock)); + lockdep_assert_held(&vgic_cpu->ap_list_lock); count = compute_ap_list_depth(vcpu, &multi_sgi); if (count > kvm_vgic_global_state.nr_lr || multi_sgi) -- 1.8.3

1 0

[PATCH 0/2] iommu: smmu-v3 support Virtualization feature when 3408iMR/3416iMRraid card exist
by Yang Yingliang 13 Jan '20

13 Jan '20

luochunsheng (2): iommu: smmu-v3 support Virtualization feature when 3408iMR/3416iMRraid card exist openeuler_defconfig: CONFIG_SMMU_BYPASS_DEV=y arch/arm64/configs/openeuler_defconfig | 1 + drivers/iommu/Kconfig | 6 ++ drivers/iommu/arm-smmu-v3.c | 123 +++++++++++++++++++++++++++++++++ drivers/iommu/iommu.c | 15 +++- include/linux/iommu.h | 6 ++ 5 files changed, 150 insertions(+), 1 deletion(-) -- 1.8.3

1 2

[PATCH 00/87] KVM/arm updates for openEuler
by Yang Yingliang 13 Jan '20

13 Jan '20

KVM/arm updates for openEuler. Andrew Murray (10): arm64: arm_pmu: Remove unnecessary isb instruction arm64: KVM: Encapsulate kvm_cpu_context in kvm_host_data arm64: KVM: Add accessors to track guest/host only counters arm64: arm_pmu: Add !VHE support for exclude_host/exclude_guest attributes arm64: KVM: Enable !VHE support for :G/:H perf event modifiers arm64: KVM: Enable VHE support for :G/:H perf event modifiers arm64: KVM: Avoid isb's by using direct pmxevtyper sysreg arm64: docs: Document perf event attributes arm64: KVM: Fix perf cycle counter support for VHE KVM: arm/arm64: Re-create event when setting counter value Christoffer Dall (8): KVM: arm64: Safety check PSTATE when entering guest and handle IL KVM: arm64: Clarify explanation of STAGE2_PGTABLE_LEVELS KVM: arm/arm64: vgic: Consider priority and active state for pending irq KVM: arm/arm64: Fixup the kvm_exit tracepoint KVM: arm/arm64: Remove arch timer workqueue KVM: arm64: Make vcpu const in vcpu_read_sys_reg KVM: arm/arm64: Fix unintended stage 2 PMD mappings KVM: arm/arm64: Simplify bg_timer programming Eric Auger (1): KVM: arm/arm64: vgic: Use a single IO device per redistributor Feng Tiantian (1): fbcon: fix ypos over boundary issue Heyi Guo (2): irqchip/gic-v3-its: Set VPENDING table as inner-shareable kvm/vgic-its: flush pending LPIs when nuking DT James Morse (1): KVM: arm64: Move pmu hyp code under hyp's Makefile to avoid instrumentation Julien Thierry (2): KVM: arm/arm64: vgic: Make vgic_irq->irq_lock a raw_spinlock KVM: arm/arm64: vgic: Make vgic_cpu->ap_list_lock a raw_spinlock Kristina Martsenko (1): vgic: Add support for 52bit guest physical address Marc Zyngier (21): arm64: KVM: Add trapped system register access tracepoint arm/arm64: KVM: Add ARM_EXCEPTION_IS_TRAP macro arm: KVM: Add S2_PMD_{MASK, SIZE} constants arm: KVM: Add missing kvm_stage2_has_pmd() helper arm/arm64: KVM: Statically configure the host's view of MPIDR arm64: KVM: Always set ICH_HCR_EL2.EN if GICv4 is enabled KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register KVM: arm/arm64: vgic: Add LPI translation cache definition KVM: arm/arm64: vgic: Add __vgic_put_lpi_locked primitive KVM: arm/arm64: vgic-its: Add MSI-LPI translation cache invalidation KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on specific commands KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on disabling LPIs KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on ITS disable KVM: arm/arm64: vgic-its: Invalidate MSI-LPI translation cache on vgic teardown KVM: arm/arm64: vgic-its: Cache successful MSI->LPI translation KVM: arm/arm64: vgic-its: Check the LPI translation cache on MSI injection KVM: arm/arm64: vgic-irqfd: Implement kvm_arch_set_irq_inatomic KVM: Call kvm_arch_vcpu_blocking early into the blocking sequence irqchip/gic-v3-its: Make vlpi_lock a spinlock KVM: arm/arm64: vgic: Allow more than 256 vcpus for KVM_IRQ_LINE Mark Rutland (1): KVM: arm/arm64: Log PSTATE for unhandled sysregs Punit Agrawal (8): KVM: arm/arm64: Share common code in user_mem_abort() KVM: arm/arm64: Re-factor setting the Stage 2 entry to exec on fault KVM: arm/arm64: Introduce helpers to manipulate page table entries KVM: arm64: Support dirty page tracking for PUD hugepages KVM: arm64: Support PUD hugepage in stage2_is_exec() KVM: arm64: Support handling access faults for PUD hugepages KVM: arm64: Update age handlers to support PUD hugepages KVM: arm64: Add support for creating PUD hugepages at stage 2 Suzuki K Poulose (20): kvm: arm/arm64: Remove spurious WARN_ON kvm: arm64: Add helper for loading the stage2 setting for a VM arm64: Add a helper for PARange to physical shift conversion kvm: arm64: Clean up VTCR_EL2 initialisation kvm: arm/arm64: Allow arch specific configurations for VM kvm: arm64: Configure VTCR_EL2 per VM kvm: arm/arm64: Prepare for VM specific stage2 translations kvm: arm64: Prepare for dynamic stage2 page table layout kvm: arm64: Make stage2 page table layout dynamic kvm: arm64: Dynamic configuration of VTTBR mask kvm: arm64: Configure VTCR_EL2.SL0 per VM kvm: arm64: Switch to per VM IPA limit kvm: arm64: Add 52bit support for PAR to HPFAR conversoin kvm: arm64: Set a limit on the IPA size kvm: arm64: Limit the minimum number of page table levels kvm: arm64: Allow tuning the physical address size for VM KVM: arm64: Relax the restriction on using stage2 PUD huge mapping KVM: arm/arm64: Enforce PTE mappings at stage2 when needed KVM: arm/arm64: Fix handling of stage2 huge mappings kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command Yiwen Jiang (1): kvm: arm/arm64: add irqsave for lpi_cache_lock Zenghui Yu (7): KVM: arm/arm64: Add support for probing Hisi ncsnp capability KVM: arm/arm64: Adjust entry/exit and trap related tracepoints perf tools arm64: Add support for get_cpuid() function perf, kvm/arm64: Add stat support on arm64 perf, kvm/arm64: perf-kvm-stat to report VM TRAP KVM: arm/arm64: Avoid the unnecessary stage 2 translation faults KVM: arm/arm64: Only probe CPU type and ncsnp info in hypervisor honghao (1): KVM: arm/arm64: Probe Hisi CPU TYPE from ACPI/DTB Documentation/arm64/perf.txt | 85 ++++ Documentation/virtual/kvm/api.txt | 43 +- arch/arm/include/asm/hisi_cpu_model.h | 18 + arch/arm/include/asm/kvm_arm.h | 4 +- arch/arm/include/asm/kvm_asm.h | 4 + arch/arm/include/asm/kvm_host.h | 25 +- arch/arm/include/asm/kvm_mmu.h | 76 ++- arch/arm/include/asm/stage2_pgtable.h | 69 ++- arch/arm/include/uapi/asm/kvm.h | 4 +- arch/arm/kvm/coproc.c | 4 +- arch/arm/kvm/hyp/cp15-sr.c | 1 - arch/arm64/include/asm/cpufeature.h | 21 + arch/arm64/include/asm/hisi_cpu_model.h | 21 + arch/arm64/include/asm/kvm_arm.h | 160 ++++-- arch/arm64/include/asm/kvm_asm.h | 13 +- arch/arm64/include/asm/kvm_host.h | 61 ++- arch/arm64/include/asm/kvm_hyp.h | 10 + arch/arm64/include/asm/kvm_mmu.h | 84 +++- arch/arm64/include/asm/pgtable-hwdef.h | 4 + arch/arm64/include/asm/pgtable.h | 9 + arch/arm64/include/asm/ptrace.h | 3 + arch/arm64/include/asm/stage2_pgtable-nopmd.h | 42 -- arch/arm64/include/asm/stage2_pgtable-nopud.h | 39 -- arch/arm64/include/asm/stage2_pgtable.h | 242 ++++++--- arch/arm64/include/uapi/asm/kvm.h | 4 +- arch/arm64/kernel/asm-offsets.c | 1 + arch/arm64/kernel/perf_event.c | 50 +- arch/arm64/kvm/Makefile | 3 +- arch/arm64/kvm/handle_exit.c | 10 + arch/arm64/kvm/hyp/Makefile | 1 - arch/arm64/kvm/hyp/hyp-entry.S | 16 +- arch/arm64/kvm/hyp/s2-setup.c | 90 ---- arch/arm64/kvm/hyp/switch.c | 49 +- arch/arm64/kvm/hyp/sysreg-sr.c | 20 +- arch/arm64/kvm/hyp/tlb.c | 4 +- arch/arm64/kvm/pmu.c | 201 ++++++++ arch/arm64/kvm/reset.c | 103 ++++ arch/arm64/kvm/sys_regs.c | 15 +- arch/arm64/kvm/sys_regs.h | 4 + arch/arm64/kvm/trace.h | 70 +++ drivers/irqchip/irq-gic-v3-its.c | 20 +- drivers/video/fbdev/core/fbcon.h | 5 +- include/kvm/arm_arch_timer.h | 7 - include/kvm/arm_vgic.h | 17 +- include/linux/irqchip/arm-gic-v3.h | 8 + include/uapi/linux/kvm.h | 11 + tools/perf/arch/arm64/Makefile | 2 + tools/perf/arch/arm64/util/Build | 1 + tools/perf/arch/arm64/util/aarch64_guest_exits.h | 95 ++++ tools/perf/arch/arm64/util/header.c | 74 +-- tools/perf/arch/arm64/util/kvm-stat.c | 112 +++++ virt/kvm/arm/arch_timer.c | 67 +-- virt/kvm/arm/arm.c | 41 +- virt/kvm/arm/hisi_cpu_model.c | 116 +++++ virt/kvm/arm/hyp/vgic-v3-sr.c | 4 +- virt/kvm/arm/mmu.c | 592 ++++++++++++++++------- virt/kvm/arm/pmu.c | 42 +- virt/kvm/arm/trace.h | 27 +- virt/kvm/arm/vgic/vgic-debug.c | 4 +- virt/kvm/arm/vgic/vgic-init.c | 18 +- virt/kvm/arm/vgic/vgic-irqfd.c | 36 +- virt/kvm/arm/vgic/vgic-its.c | 356 ++++++++++++-- virt/kvm/arm/vgic/vgic-kvm-device.c | 2 +- virt/kvm/arm/vgic/vgic-mmio-v2.c | 14 +- virt/kvm/arm/vgic/vgic-mmio-v3.c | 100 ++-- virt/kvm/arm/vgic/vgic-mmio.c | 34 +- virt/kvm/arm/vgic/vgic-v2.c | 4 +- virt/kvm/arm/vgic/vgic-v3.c | 8 +- virt/kvm/arm/vgic/vgic.c | 170 ++++--- virt/kvm/arm/vgic/vgic.h | 6 + virt/kvm/kvm_main.c | 6 +- 71 files changed, 2807 insertions(+), 875 deletions(-) create mode 100644 Documentation/arm64/perf.txt create mode 100644 arch/arm/include/asm/hisi_cpu_model.h create mode 100644 arch/arm64/include/asm/hisi_cpu_model.h delete mode 100644 arch/arm64/include/asm/stage2_pgtable-nopmd.h delete mode 100644 arch/arm64/include/asm/stage2_pgtable-nopud.h delete mode 100644 arch/arm64/kvm/hyp/s2-setup.c create mode 100644 arch/arm64/kvm/pmu.c create mode 100644 tools/perf/arch/arm64/util/aarch64_guest_exits.h create mode 100644 tools/perf/arch/arm64/util/kvm-stat.c create mode 100644 virt/kvm/arm/hisi_cpu_model.c -- 1.8.3

1 87

[HW] hardware set planned for first development support
by Dmitry Ponyatov 13 Jan '20

13 Jan '20

Good Day Where should I ask about the hardware set planned for first development support? I have a trash netbook based on ATM7029 is a good candidate in case anybody can find SDK for this SoC. https://aliexpress.ru/item/32891360597.html ------------------------------ With best regards, Dmitry Ponyatov, IoT/embedded engineer, tel. +7 917 10 10 818

1 0

[PATCH hulk-4.19-next] config: add openeuler_defconfig
by Xie XiuQi 13 Jan '20

13 Jan '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Add openeuler_defconfig for openeuler itself. Based on kernel-4.19.90-vhulk1912.2.1.0024.aarch64.rpm, major changes: BCACHE n -> m NODES_SHIFT 3 -> 4 Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 5962 ++++++++++++++++++++++++ 1 file changed, 5962 insertions(+) create mode 100644 arch/arm64/configs/openeuler_defconfig diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig new file mode 100644 index 000000000000..9d1e3ca2b63c --- /dev/null +++ b/arch/arm64/configs/openeuler_defconfig @@ -0,0 +1,5962 @@ +# +# Automatically generated file; DO NOT EDIT. +# Linux/arm64 4.19.93 Kernel Configuration +# + +# +# Compiler: gcc_old (GCC) 7.3.0 +# +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=70300 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +# CONFIG_KTASK is not set + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +# CONFIG_NO_HZ_IDLE is not set +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# CPU/Task time and stats accounting +# +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_CPU_ISOLATION=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_CONTEXT_TRACKING=y +# CONFIG_CONTEXT_TRACKING_FORCE is not set +CONFIG_RCU_NOCB_CPU=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y +CONFIG_CGROUP_FILES=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_BPF=y +CONFIG_EXPERT=y +CONFIG_UID16=y +CONFIG_MULTIUSER=y +# CONFIG_SGETMASK_SYSCALL is not set +CONFIG_SYSFS_SYSCALL=y +# CONFIG_SYSCTL_SYSCALL is not set +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT_ALWAYS_ON=y +CONFIG_USERFAULTFD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_DEBUG_RSEQ is not set +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y +# CONFIG_PC104 is not set + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +CONFIG_DEBUG_PERF_USE_VMALLOC=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLUB_MEMCG_SYSFS_ON is not set +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_SLAB_MERGE_DEFAULT=y +CONFIG_SLAB_FREELIST_RANDOM=y +# CONFIG_SLAB_FREELIST_HARDENED is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_ARM64=y +CONFIG_64BIT=y +CONFIG_MMU=y +CONFIG_ARM64_PAGE_SHIFT=16 +CONFIG_ARM64_CONT_SHIFT=5 +CONFIG_ARCH_MMAP_RND_BITS_MIN=14 +CONFIG_ARCH_MMAP_RND_BITS_MAX=29 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=7 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ZONE_DMA32=y +CONFIG_HAVE_GENERIC_GUP=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_SMP=y +CONFIG_KERNEL_MODE_NEON=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_PROC_KCORE_TEXT=y + +# +# Platform selection +# +# CONFIG_ARCH_ACTIONS is not set +# CONFIG_ARCH_SUNXI is not set +# CONFIG_ARCH_ALPINE is not set +# CONFIG_ARCH_BCM2835 is not set +# CONFIG_ARCH_BCM_IPROC is not set +# CONFIG_ARCH_BERLIN is not set +# CONFIG_ARCH_BRCMSTB is not set +# CONFIG_ARCH_EXYNOS is not set +# CONFIG_ARCH_K3 is not set +# CONFIG_ARCH_LAYERSCAPE is not set +# CONFIG_ARCH_LG1K is not set +CONFIG_ARCH_HISI=y +# CONFIG_ARCH_MEDIATEK is not set +# CONFIG_ARCH_MESON is not set +# CONFIG_ARCH_MVEBU is not set +CONFIG_ARCH_QCOM=y +# CONFIG_ARCH_REALTEK is not set +# CONFIG_ARCH_ROCKCHIP is not set +CONFIG_ARCH_SEATTLE=y +# CONFIG_ARCH_SYNQUACER is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_STRATIX10 is not set +# CONFIG_ARCH_TEGRA is not set +# CONFIG_ARCH_SPRD is not set +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_THUNDER2=y +# CONFIG_ARCH_UNIPHIER is not set +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_XGENE=y +# CONFIG_ARCH_ZX is not set +# CONFIG_ARCH_ZYNQMP is not set +CONFIG_HAVE_LIVEPATCH_WO_FTRACE=y + +# +# Enable Livepatch +# +CONFIG_LIVEPATCH=y +CONFIG_LIVEPATCH_WO_FTRACE=y +CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY=y +# CONFIG_LIVEPATCH_STACK is not set +CONFIG_LIVEPATCH_RESTRICT_KPROBE=y + +# +# Bus support +# +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIEAER_INJECT=m +CONFIG_PCIE_ECRC=y +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +CONFIG_PCIE_DPC=y +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=y +# CONFIG_PCI_PF_STUB is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_ECAM=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_LABEL=y +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +CONFIG_HOTPLUG_PCI_SHPC=y + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +# CONFIG_PCIE_CADENCE_HOST is not set +# CONFIG_PCI_FTPCI100 is not set +CONFIG_PCI_HOST_COMMON=y +CONFIG_PCI_HOST_GENERIC=y +# CONFIG_PCIE_XILINX is not set +CONFIG_PCI_XGENE=y +CONFIG_PCI_XGENE_MSI=y +CONFIG_PCI_HOST_THUNDER_PEM=y +CONFIG_PCI_HOST_THUNDER_ECAM=y + +# +# DesignWare PCI Core Support +# +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +# CONFIG_PCIE_DW_PLAT_HOST is not set +CONFIG_PCI_HISI=y +# CONFIG_PCIE_QCOM is not set +# CONFIG_PCIE_KIRIN is not set +# CONFIG_PCIE_HISI_STB is not set +CONFIG_HISILICON_PCIE_CAE=m + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set + +# +# Kernel Features +# + +# +# ARM errata workarounds via the alternatives framework +# +CONFIG_ARM64_ERRATUM_826319=y +CONFIG_ARM64_ERRATUM_827319=y +CONFIG_ARM64_ERRATUM_824069=y +CONFIG_ARM64_ERRATUM_819472=y +CONFIG_ARM64_ERRATUM_832075=y +CONFIG_ARM64_ERRATUM_834220=y +CONFIG_ARM64_ERRATUM_845719=y +CONFIG_ARM64_ERRATUM_843419=y +CONFIG_ARM64_ERRATUM_1024718=y +# CONFIG_ARM64_ERRATUM_1463225 is not set +CONFIG_CAVIUM_ERRATUM_22375=y +CONFIG_CAVIUM_ERRATUM_23144=y +CONFIG_CAVIUM_ERRATUM_23154=y +CONFIG_CAVIUM_ERRATUM_27456=y +CONFIG_CAVIUM_ERRATUM_30115=y +CONFIG_QCOM_FALKOR_ERRATUM_1003=y +CONFIG_QCOM_FALKOR_ERRATUM_1009=y +CONFIG_QCOM_QDF2400_ERRATUM_0065=y +CONFIG_SOCIONEXT_SYNQUACER_PREITS=y +CONFIG_HISILICON_ERRATUM_161600802=y +CONFIG_QCOM_FALKOR_ERRATUM_E1041=y +# CONFIG_ARM64_4K_PAGES is not set +# CONFIG_ARM64_16K_PAGES is not set +CONFIG_ARM64_64K_PAGES=y +# CONFIG_ARM64_VA_BITS_42 is not set +CONFIG_ARM64_VA_BITS_48=y +CONFIG_ARM64_VA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +# CONFIG_ARM64_PA_BITS_52 is not set +CONFIG_ARM64_PA_BITS=48 +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_SCHED_MC=y +# CONFIG_SCHED_SMT is not set +CONFIG_NR_CPUS=1024 +CONFIG_HOTPLUG_CPU=y +CONFIG_ARM64_ERR_RECOV=y +CONFIG_MPAM=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=4 +# CONFIG_NUMA_AWARE_SPINLOCKS is not set +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HW_PERF_EVENTS=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_SECCOMP=y +CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_TIME_ACCOUNTING=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +# CONFIG_XEN is not set +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDEN_EL2_VECTORS=y +CONFIG_ARM64_SSBD=y +# CONFIG_ARMV8_DEPRECATED is not set +# CONFIG_ARM64_SW_TTBR0_PAN is not set + +# +# ARMv8.1 architectural features +# +CONFIG_ARM64_HW_AFDBM=y +CONFIG_ARM64_PAN=y +CONFIG_ARM64_LSE_ATOMICS=y +CONFIG_ARM64_VHE=y + +# +# ARMv8.2 architectural features +# +CONFIG_ARM64_UAO=y +CONFIG_ARM64_PMEM=y +CONFIG_ARM64_RAS_EXTN=y +CONFIG_ARM64_SVE=y +CONFIG_ARM64_MODULE_PLTS=y +# CONFIG_ARM64_PSEUDO_NMI is not set +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_RANDOMIZE_MODULE_REGION_FULL=y + +# +# Boot options +# +CONFIG_ARM64_ACPI_PARKING_PROTOCOL=y +CONFIG_CMDLINE="console=ttyAMA0" +# CONFIG_CMDLINE_FORCE is not set +CONFIG_EFI_STUB=y +CONFIG_EFI=y +CONFIG_DMI=y +CONFIG_COMPAT=y +CONFIG_SYSVIPC_COMPAT=y + +# +# Power management options +# +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_SUSPEND_SKIP_SYNC is not set +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_DPM_WATCHDOG is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_PM_GENERIC_DOMAINS_OF=y +CONFIG_CPU_PM=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y + +# +# CPU Power Management +# + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y + +# +# ARM CPU Idle Drivers +# +# CONFIG_ARM_CPUIDLE is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set + +# +# CPU frequency scaling drivers +# +# CONFIG_CPUFREQ_DT is not set +CONFIG_ACPI_CPPC_CPUFREQ=y +# CONFIG_ARM_BIG_LITTLE_CPUFREQ is not set +CONFIG_ARM_SCPI_CPUFREQ=m +# CONFIG_QORIQ_CPUFREQ is not set + +# +# Firmware Drivers +# +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_PSCI_CHECKER is not set +# CONFIG_ARM_SCMI_PROTOCOL is not set +CONFIG_ARM_SCPI_PROTOCOL=m +CONFIG_ARM_SCPI_POWER_DOMAIN=m +CONFIG_ARM_SDE_INTERFACE=y +# CONFIG_FIRMWARE_MEMMAP is not set +CONFIG_DMIID=y +CONFIG_DMI_SYSFS=y +# CONFIG_ISCSI_IBFT is not set +CONFIG_FW_CFG_SYSFS=y +# CONFIG_FW_CFG_SYSFS_CMDLINE is not set +CONFIG_HAVE_ARM_SMCCC=y +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_ESRT=y +CONFIG_EFI_VARS_PSTORE=y +CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y +CONFIG_EFI_PARAMS_FROM_FDT=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_ARMSTUB=y +CONFIG_EFI_ARMSTUB_DTB_LOADER=y +# CONFIG_EFI_BOOTLOADER_CONTROL is not set +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +# CONFIG_RESET_ATTACK_MITIGATION is not set +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_ARM=y + +# +# Tegra firmware driver +# +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_GENERIC_GSI=y +CONFIG_ACPI_CCA_REQUIRED=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +# CONFIG_ACPI_EC_DEBUGFS is not set +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_FAN=y +# CONFIG_ACPI_TAD is not set +# CONFIG_ACPI_DOCK is not set +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_MCFG=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y +CONFIG_ACPI_HED=y +# CONFIG_ACPI_CUSTOM_METHOD is not set +# CONFIG_ACPI_BGRT is not set +CONFIG_ACPI_REDUCED_HARDWARE_ONLY=y +# CONFIG_ACPI_NFIT is not set +CONFIG_HAVE_ACPI_APEI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_SEA=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=m +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +# CONFIG_PMIC_OPREGION is not set +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_ACPI_IORT=y +CONFIG_ACPI_GTDT=y +CONFIG_ACPI_PPTT=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_HAVE_KVM_ARCH_TLB_FLUSH_ALL=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE=y +CONFIG_IRQ_BYPASS_MANAGER=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_PMU=y +CONFIG_KVM_INDIRECT_VECTORS=y +CONFIG_VHOST_NET=m +# CONFIG_VHOST_SCSI is not set +CONFIG_VHOST_VSOCK=m +CONFIG_VHOST=m +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set +CONFIG_ARM64_CRYPTO=y +CONFIG_CRYPTO_SHA256_ARM64=m +# CONFIG_CRYPTO_SHA512_ARM64 is not set +CONFIG_CRYPTO_SHA1_ARM64_CE=m +CONFIG_CRYPTO_SHA2_ARM64_CE=m +# CONFIG_CRYPTO_SHA512_ARM64_CE is not set +# CONFIG_CRYPTO_SHA3_ARM64 is not set +# CONFIG_CRYPTO_SM3_ARM64_CE is not set +CONFIG_CRYPTO_SM4_ARM64_CE=m +CONFIG_CRYPTO_GHASH_ARM64_CE=m +CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64=y +CONFIG_CRYPTO_AES_ARM64_CE=m +CONFIG_CRYPTO_AES_ARM64_CE_CCM=m +CONFIG_CRYPTO_AES_ARM64_CE_BLK=m +CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m +# CONFIG_CRYPTO_CHACHA20_NEON is not set +# CONFIG_CRYPTO_AES_ARM64_BS is not set + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +CONFIG_STATIC_KEYS_SELFTEST=y +CONFIG_UPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_NMI_WATCHDOG=y +CONFIG_HAVE_HARDLOCKUP_DETECTOR_ARCH=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_RCU_TABLE_INVALIDATE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11 +CONFIG_CLONE_BACKWARDS=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_REFCOUNT_FULL=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_PLUGIN_HOSTCC="" +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +# CONFIG_MODULE_SIG_FORCE is not set +CONFIG_MODULE_SIG_ALL=y +# CONFIG_MODULE_SIG_SHA1 is not set +# CONFIG_MODULE_SIG_SHA224 is not set +CONFIG_MODULE_SIG_SHA256=y +# CONFIG_MODULE_SIG_SHA384 is not set +# CONFIG_MODULE_SIG_SHA512 is not set +CONFIG_MODULE_SIG_HASH="sha256" +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_ZONED=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y +CONFIG_BLK_DEBUG_FS=y +CONFIG_BLK_DEBUG_FS_ZONED=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_MQ_RDMA=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_CFQ_GROUP_IOSCHED=y +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK=y +CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_READ_LOCK=y +CONFIG_ARCH_INLINE_READ_LOCK_BH=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_READ_UNLOCK=y +CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_WRITE_LOCK=y +CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_SPIN_TRYLOCK=y +CONFIG_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_INLINE_SPIN_LOCK=y +CONFIG_INLINE_SPIN_LOCK_BH=y +CONFIG_INLINE_SPIN_LOCK_IRQ=y +CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_INLINE_SPIN_UNLOCK_BH=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_READ_LOCK=y +CONFIG_INLINE_READ_LOCK_BH=y +CONFIG_INLINE_READ_LOCK_IRQ=y +CONFIG_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_BH=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_WRITE_LOCK=y +CONFIG_INLINE_WRITE_LOCK_BH=y +CONFIG_INLINE_WRITE_LOCK_IRQ=y +CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_BH=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MEMBLOCK_PFN_VALID=y +# CONFIG_COHERENT_DEVICE is not set +CONFIG_NO_BOOTMEM=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_SHRINK_PAGECACHE=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_AREAS=7 +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +# CONFIG_Z3FOLD is not set +CONFIG_ZSMALLOC=y +# CONFIG_PGTABLE_MAPPING is not set +CONFIG_ZSMALLOC_STAT=y +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set +CONFIG_IDLE_PAGE_TRACKING=y +CONFIG_FRAME_VECTOR=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_NET=y +CONFIG_COMPAT_NETLINK_MESSAGES=y +CONFIG_NET_INGRESS=y +CONFIG_NET_EGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_TLS=m +CONFIG_TLS_DEVICE=y +CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +# CONFIG_XFRM_INTERFACE is not set +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +# CONFIG_SMC is not set +# CONFIG_XDP_SOCKETS is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE_COMMON=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_INET_RAW_DIAG=m +# CONFIG_INET_DIAG_DESTROY is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +# CONFIG_TCP_CONG_CDG is not set +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +# CONFIG_IPV6_ILA is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_FAMILY_BRIDGE=y +CONFIG_NETFILTER_FAMILY_ARP=y +CONFIG_NETFILTER_NETLINK_ACCT=m +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_OSF=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NETFILTER_CONNCOUNT=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=y +CONFIG_NF_NAT_PROTO_UDPLITE=y +CONFIG_NF_NAT_PROTO_SCTP=y +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_SET=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_COUNTER=m +# CONFIG_NFT_CONNLIMIT is not set +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +# CONFIG_NFT_TUNNEL is not set +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +# CONFIG_NFT_SOCKET is not set +# CONFIG_NFT_OSF is not set +# CONFIG_NFT_TPROXY is not set +CONFIG_NF_DUP_NETDEV=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +# CONFIG_NF_FLOW_TABLE is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +CONFIG_NETFILTER_XT_TARGET_LED=m +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +CONFIG_NETFILTER_XT_MATCH_IPCOMP=m +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +CONFIG_NETFILTER_XT_MATCH_L2TP=m +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +CONFIG_NETFILTER_XT_MATCH_NFACCT=m +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +CONFIG_NETFILTER_XT_MATCH_TIME=m +CONFIG_NETFILTER_XT_MATCH_U32=m +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +# CONFIG_IP_SET_HASH_IPMAC is not set +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_MH is not set +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS MH scheduler +# +CONFIG_IP_VS_MH_TAB_INDEX=12 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_SOCKET_IPV4=m +CONFIG_NF_TPROXY_IPV4=m +CONFIG_NF_TABLES_IPV4=y +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_DUP_IPV4=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=y +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_SOCKET_IPV6=m +CONFIG_NF_TPROXY_IPV6=m +CONFIG_NF_TABLES_IPV6=y +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_DUP_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_INET_SCTP_DIAG=m +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +# CONFIG_ATM_MPOA is not set +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +CONFIG_6LOWPAN=m +# CONFIG_6LOWPAN_DEBUGFS is not set +# CONFIG_6LOWPAN_NHC is not set +CONFIG_IEEE802154=m +# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set +CONFIG_IEEE802154_SOCKET=m +# CONFIG_IEEE802154_6LOWPAN is not set +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +# CONFIG_NET_SCH_CBS is not set +# CONFIG_NET_SCH_ETF is not set +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +# CONFIG_NET_SCH_SKBPRIO is not set +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=m +# CONFIG_NET_SCH_CAKE is not set +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_DEFAULT_FQ is not set +# CONFIG_DEFAULT_CODEL is not set +CONFIG_DEFAULT_FQ_CODEL=y +# CONFIG_DEFAULT_SFQ is not set +# CONFIG_DEFAULT_PFIFO_FAST is not set +CONFIG_DEFAULT_NET_SCH="fq_codel" + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +# CONFIG_NET_EMATCH_CANID is not set +CONFIG_NET_EMATCH_IPSET=m +# CONFIG_NET_EMATCH_IPT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_SAMPLE=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_ACT_SKBMOD=m +# CONFIG_NET_ACT_IFE is not set +CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=m +# CONFIG_BATMAN_ADV is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +CONFIG_VSOCKETS=m +CONFIG_VSOCKETS_DIAG=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS_COMMON=m +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=m +# CONFIG_MPLS_ROUTING is not set +CONFIG_NET_NSH=m +# CONFIG_HSR is not set +CONFIG_NET_SWITCHDEV=y +CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_QRTR is not set +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +# CONFIG_BPF_STREAM_PARSER is not set +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=m +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_VXCAN is not set +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +# CONFIG_CAN_GRCAN is not set +# CONFIG_CAN_XILINXCAN is not set +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_C_CAN_PCI=m +CONFIG_CAN_CC770=m +# CONFIG_CAN_CC770_ISA is not set +CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_PEAK_PCIEFD is not set +CONFIG_CAN_SJA1000=m +# CONFIG_CAN_SJA1000_ISA is not set +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_PEAK_PCIEC=y +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SOFTING=m + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set + +# +# CAN USB interfaces +# +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +# CONFIG_CAN_GS_USB is not set +CONFIG_CAN_KVASER_USB=m +# CONFIG_CAN_MCBA_USB is not set +CONFIG_CAN_PEAK_USB=m +# CONFIG_CAN_UCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_STREAM_PARSER=m +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +CONFIG_CFG80211_WEXT=y +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +# CONFIG_MAC80211_RC_MINSTREL_VHT is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +CONFIG_MAC80211_DEBUGFS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=m +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y +# CONFIG_NFC is not set +CONFIG_PSAMPLE=m +# CONFIG_NET_IFE is not set +CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_SOCK_VALIDATE_XMIT=y +CONFIG_NET_DEVLINK=m +CONFIG_MAY_USE_DEVLINK=m +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=m +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# +CONFIG_ARM_AMBA=y + +# +# Generic Driver Options +# +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# +CONFIG_FW_LOADER=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_FW_LOADER_USER_HELPER is not set +CONFIG_WANT_DEV_COREDUMP=y +# CONFIG_ALLOW_DEV_COREDUMP is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_REGMAP_MMIO=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set +CONFIG_DMA_CMA=y + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=64 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +CONFIG_GENERIC_ARCH_TOPOLOGY=y + +# +# Bus devices +# +# CONFIG_BRCMSTB_GISB_ARB is not set +CONFIG_HISILICON_LPC=y +CONFIG_QCOM_EBI2=y +# CONFIG_SIMPLE_PM_BUS is not set +CONFIG_VEXPRESS_CONFIG=y +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_GNSS is not set +CONFIG_MTD=m +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=m +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_OF_PARTS=m +# CONFIG_MTD_AR7_PARTS is not set + +# +# Partition parsers +# + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_MAP_BANK_WIDTH_8=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_OTP is not set +CONFIG_MTD_CFI_INTELEXT=m +CONFIG_MTD_CFI_AMDSTD=m +CONFIG_MTD_CFI_STAA=m +CONFIG_MTD_CFI_UTIL=m +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=m +# CONFIG_MTD_PHYSMAP_COMPAT is not set +CONFIG_MTD_PHYSMAP_OF=m +# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set +# CONFIG_MTD_PHYSMAP_OF_GEMINI is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLOCK2MTD=m + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_SPI_NAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +CONFIG_MTD_SPI_NOR=m +CONFIG_MTD_MT81xx_NOR=m +CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y +# CONFIG_SPI_CADENCE_QUADSPI is not set +CONFIG_SPI_HISI_SFC=m +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +CONFIG_MTD_UBI_GLUEBI=m +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_MTD_HISILICON_SFC=m +CONFIG_DTC=y +CONFIG_OF=y +# CONFIG_OF_UNITTEST is not set +CONFIG_OF_FLATTREE=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_KOBJ=y +CONFIG_OF_DYNAMIC=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_IRQ=y +CONFIG_OF_NET=y +CONFIG_OF_MDIO=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OF_RESOLVE=y +CONFIG_OF_OVERLAY=y +CONFIG_OF_NUMA=y +# CONFIG_PARPORT is not set +CONFIG_PNP=y +CONFIG_PNP_DEBUG_MESSAGES=y + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +CONFIG_CDROM=m +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +# CONFIG_ZRAM_WRITEBACK is not set +# CONFIG_ZRAM_MEMORY_TRACKING is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_VIRTIO_BLK=m +# CONFIG_VIRTIO_BLK_SCSI is not set +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# NVME Support +# +CONFIG_NVME_CORE=m +CONFIG_BLK_DEV_NVME=m +# CONFIG_NVME_MULTIPATH is not set +CONFIG_NVME_FABRICS=m +CONFIG_NVME_RDMA=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_RDMA=m +CONFIG_NVME_TARGET_FC=m +CONFIG_NVME_TARGET_FCLOOP=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_PHANTOM is not set +# CONFIG_SGI_IOC4 is not set +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +# CONFIG_ICS932S401 is not set +CONFIG_ENCLOSURE_SERVICES=m +# CONFIG_HP_ILO is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +# CONFIG_SRAM is not set +CONFIG_VEXPRESS_SYSCFG=y +# CONFIG_PCI_ENDPOINT_TEST is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_ALTERA_STAPL=m + +# +# Intel MIC & related support +# + +# +# Intel MIC Bus Driver +# + +# +# SCIF Bus Driver +# + +# +# VOP Bus Driver +# + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +# CONFIG_MISC_RTSX_PCI is not set +# CONFIG_MISC_RTSX_USB is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_MQ_DEFAULT=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +CONFIG_SCSI_AACRAID=m +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +CONFIG_SCSI_HISI_SAS=m +CONFIG_SCSI_HISI_SAS_PCI=m +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SMARTPQI=m +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +CONFIG_SCSI_IPR=m +CONFIG_SCSI_IPR_TRACE=y +CONFIG_SCSI_IPR_DUMP=y +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA_FC=m +# CONFIG_TCM_QLA2XXX is not set +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_QEDI=m +CONFIG_QEDF=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=y +CONFIG_SCSI_DH_HP_SW=y +CONFIG_SCSI_DH_EMC=y +CONFIG_SCSI_DH_ALUA=y +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_ATA=m +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +CONFIG_SATA_MOBILE_LPM_POLICY=0 +CONFIG_SATA_AHCI_PLATFORM=m +# CONFIG_AHCI_CEVA is not set +CONFIG_AHCI_XGENE=m +# CONFIG_AHCI_QORIQ is not set +CONFIG_SATA_AHCI_SEATTLE=m +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +CONFIG_ATA_PIIX=m +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +CONFIG_ATA_GENERIC=m +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BCACHE=m +# CONFIG_BCACHE_DEBUG is not set +# CONFIG_BCACHE_CLOSURES_DEBUG is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +CONFIG_DM_DEBUG=y +CONFIG_DM_BUFIO=m +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_UNSTRIPED is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_SMQ=m +# CONFIG_DM_WRITECACHE is not set +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_FEC is not set +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_DM_INTEGRITY=m +# CONFIG_DM_ZONED is not set +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +CONFIG_TCM_FC=m +CONFIG_ISCSI_TARGET=m +CONFIG_ISCSI_TARGET_CXGB4=m +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +# CONFIG_EQUALIZER is not set +CONFIG_NET_FC=y +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_IPVTAP=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +# CONFIG_GTP is not set +CONFIG_MACSEC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_VSOCKMON=m +# CONFIG_ARCNET is not set +# CONFIG_ATM_DRIVERS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_MDIO=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +CONFIG_NET_VENDOR_ALACRITECH=y +# CONFIG_SLICOSS is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +# CONFIG_ENA_ETHERNET is not set +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=m +# CONFIG_AMD_XGBE_DCB is not set +CONFIG_NET_XGENE=y +CONFIG_NET_XGENE_V2=m +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_NET_VENDOR_ARC=y +CONFIG_NET_VENDOR_ATHEROS=y +# CONFIG_ATL2 is not set +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_TIGON3=m +CONFIG_TIGON3_HWMON=y +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +# CONFIG_SYSTEMPORT is not set +CONFIG_BNXT=m +CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_FLOWER_OFFLOAD=y +CONFIG_BNXT_DCB=y +# CONFIG_BNXT_HWMON is not set +# CONFIG_NET_VENDOR_BROCADE is not set +# CONFIG_NET_VENDOR_CADENCE is not set +CONFIG_NET_VENDOR_CAVIUM=y +CONFIG_THUNDER_NIC_PF=m +CONFIG_THUNDER_NIC_VF=m +CONFIG_THUNDER_NIC_BGX=m +CONFIG_THUNDER_NIC_RGX=m +CONFIG_CAVIUM_PTP=y +CONFIG_LIQUIDIO=m +CONFIG_LIQUIDIO_VF=m +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4=m +# CONFIG_CHELSIO_T4_DCB is not set +CONFIG_CHELSIO_T4VF=m +CONFIG_CHELSIO_LIB=m +# CONFIG_NET_VENDOR_CISCO is not set +# CONFIG_NET_VENDOR_CORTINA is not set +CONFIG_DNET=m +# CONFIG_NET_VENDOR_DEC is not set +# CONFIG_NET_VENDOR_DLINK is not set +# CONFIG_NET_VENDOR_EMULEX is not set +# CONFIG_NET_VENDOR_EZCHIP is not set +CONFIG_NET_VENDOR_HISILICON=y +# CONFIG_HIX5HD2_GMAC is not set +# CONFIG_HISI_FEMAC is not set +# CONFIG_HIP04_ETH is not set +CONFIG_HNS_MDIO=m +CONFIG_HNS=m +CONFIG_HNS_DSAF=m +CONFIG_HNS_ENET=m +CONFIG_HNS3=m +CONFIG_HNS3_HCLGE=m +CONFIG_HNS3_DCB=y +CONFIG_HNS3_HCLGEVF=m +CONFIG_HNS3_ENET=m +CONFIG_HNS3_CAE=m +# CONFIG_NET_VENDOR_HP is not set +CONFIG_NET_VENDOR_HUAWEI=y +CONFIG_HINIC=m +# CONFIG_NET_VENDOR_I825XX is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_IGB=m +CONFIG_IGB_HWMON=y +CONFIG_IGBVF=m +# CONFIG_IXGB is not set +CONFIG_IXGBE=m +CONFIG_IXGBE_HWMON=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +# CONFIG_I40E_DCB is not set +CONFIG_I40EVF=m +CONFIG_ICE=m +CONFIG_FM10K=m +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_EN_DCB=y +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX4_CORE_GEN2 is not set +CONFIG_MLX5_CORE=m +# CONFIG_MLX5_FPGA is not set +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +# CONFIG_MLX5_ESWITCH is not set +CONFIG_MLX5_CORE_EN_DCB=y +CONFIG_MLX5_CORE_IPOIB=y +CONFIG_MLXSW_CORE=m +CONFIG_MLXSW_CORE_HWMON=y +CONFIG_MLXSW_CORE_THERMAL=y +CONFIG_MLXSW_PCI=m +CONFIG_MLXSW_I2C=m +# CONFIG_MLXSW_SWITCHIB is not set +# CONFIG_MLXSW_SWITCHX2 is not set +# CONFIG_MLXSW_SPECTRUM is not set +CONFIG_MLXSW_MINIMAL=m +CONFIG_MLXFW=m +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +CONFIG_NET_VENDOR_MICROSEMI=y +# CONFIG_MSCC_OCELOT_SWITCH is not set +CONFIG_NET_VENDOR_MYRI=y +# CONFIG_MYRI10GE is not set +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_NETERION is not set +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NFP=m +CONFIG_NFP_APP_FLOWER=y +CONFIG_NFP_APP_ABM_NIC=y +# CONFIG_NFP_DEBUG is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +CONFIG_NET_VENDOR_OKI=y +CONFIG_ETHOC=m +# CONFIG_NET_VENDOR_PACKET_ENGINES is not set +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_QLA3XXX=m +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +CONFIG_NETXEN_NIC=m +CONFIG_QED=m +CONFIG_QED_LL2=y +CONFIG_QED_SRIOV=y +CONFIG_QEDE=m +CONFIG_QED_RDMA=y +CONFIG_QED_ISCSI=y +CONFIG_QED_FCOE=y +CONFIG_QED_OOO=y +CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCA7000_SPI is not set +CONFIG_QCOM_EMAC=m +# CONFIG_RMNET is not set +# CONFIG_NET_VENDOR_RDC is not set +CONFIG_NET_VENDOR_REALTEK=y +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R8169=m +# CONFIG_NET_VENDOR_RENESAS is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_ROCKER=m +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_SFC=m +CONFIG_SFC_MTD=y +CONFIG_SFC_MCDI_MON=y +CONFIG_SFC_SRIOV=y +CONFIG_SFC_MCDI_LOGGING=y +# CONFIG_SFC_FALCON is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +CONFIG_NET_VENDOR_SMSC=y +CONFIG_SMC91X=m +CONFIG_EPIC100=m +CONFIG_SMSC911X=m +CONFIG_SMSC9420=m +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_BCM_UNIMAC=m +CONFIG_MDIO_BITBANG=m +# CONFIG_MDIO_BUS_MUX_GPIO is not set +# CONFIG_MDIO_BUS_MUX_MMIOREG is not set +CONFIG_MDIO_CAVIUM=m +CONFIG_MDIO_GPIO=m +# CONFIG_MDIO_HISI_FEMAC is not set +# CONFIG_MDIO_MSCC_MIIM is not set +CONFIG_MDIO_OCTEON=m +CONFIG_MDIO_THUNDER=m +CONFIG_MDIO_XGENE=y +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +# CONFIG_LED_TRIGGER_PHY is not set + +# +# MII PHY device drivers +# +CONFIG_AMD_PHY=m +CONFIG_AQUANTIA_PHY=m +# CONFIG_AX88796B_PHY is not set +CONFIG_AT803X_PHY=m +# CONFIG_BCM7XXX_PHY is not set +CONFIG_BCM87XX_PHY=m +CONFIG_BCM_NET_PHYLIB=m +CONFIG_BROADCOM_PHY=m +CONFIG_CICADA_PHY=m +# CONFIG_CORTINA_PHY is not set +CONFIG_DAVICOM_PHY=m +# CONFIG_DP83822_PHY is not set +# CONFIG_DP83TC811_PHY is not set +CONFIG_DP83848_PHY=m +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_ICPLUS_PHY=m +# CONFIG_INTEL_XWAY_PHY is not set +CONFIG_LSI_ET1011C_PHY=m +CONFIG_LXT_PHY=m +CONFIG_MARVELL_PHY=m +# CONFIG_MARVELL_10G_PHY is not set +CONFIG_MICREL_PHY=m +CONFIG_MICROCHIP_PHY=m +# CONFIG_MICROCHIP_T1_PHY is not set +# CONFIG_MICROSEMI_PHY is not set +CONFIG_NATIONAL_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_REALTEK_PHY=m +# CONFIG_RENESAS_PHY is not set +# CONFIG_ROCKCHIP_PHY is not set +CONFIG_SMSC_PHY=m +CONFIG_STE10XP=m +CONFIG_TERANETICS_PHY=m +CONFIG_VITESSE_PHY=m +# CONFIG_XILINX_GMII2RGMII is not set +# CONFIG_MICREL_KS8995MA is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_SR9700=m +# CONFIG_USB_NET_SR9800 is not set +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_WLAN=y +# CONFIG_WIRELESS_WDS is not set +# CONFIG_WLAN_VENDOR_ADMTEK is not set +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +# CONFIG_ATH9K is not set +# CONFIG_ATH9K_HTC is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_AHB is not set +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_SNOC is not set +# CONFIG_ATH10K_DEBUG is not set +# CONFIG_ATH10K_DEBUGFS is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +# CONFIG_WLAN_VENDOR_BROADCOM is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +# CONFIG_WLAN_VENDOR_INTEL is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +# CONFIG_WLAN_VENDOR_MARVELL is not set +# CONFIG_WLAN_VENDOR_MEDIATEK is not set +CONFIG_WLAN_VENDOR_RALINK=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +# CONFIG_RT2800PCI is not set +# CONFIG_RT2500USB is not set +# CONFIG_RT73USB is not set +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +# CONFIG_RT2800USB_RT3573 is not set +CONFIG_RT2800USB_RT53XX=y +# CONFIG_RT2800USB_RT55XX is not set +# CONFIG_RT2800USB_UNKNOWN is not set +CONFIG_RT2800_LIB=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +# CONFIG_RT2X00_LIB_DEBUGFS is not set +# CONFIG_RT2X00_DEBUG is not set +# CONFIG_WLAN_VENDOR_REALTEK is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +# CONFIG_WLAN_VENDOR_QUANTENNA is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +CONFIG_WAN=y +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300TOO is not set +# CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +# CONFIG_IEEE802154_DRIVERS is not set +# CONFIG_FUJITSU_ES is not set +# CONFIG_NETDEVSIM is not set +CONFIG_NET_FAILOVER=m +# CONFIG_ISDN is not set +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_OMAP4 is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_CAP11XX is not set +# CONFIG_KEYBOARD_BCM is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_SMBUS=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +# CONFIG_MOUSE_ELAN_I2C is not set +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_ATMEL_CAPTOUCH is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +# CONFIG_INPUT_MMA8450 is not set +# CONFIG_INPUT_GP2A is not set +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_KXTJ9 is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +# CONFIG_INPUT_HISI_POWERKEY is not set +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_SPI=m +CONFIG_RMI4_SMB=m +CONFIG_RMI4_F03=y +CONFIG_RMI4_F03_SERIO=m +CONFIG_RMI4_2D_SENSOR=y +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y +CONFIG_RMI4_F30=y +# CONFIG_RMI4_F34 is not set +# CONFIG_RMI4_F54 is not set +# CONFIG_RMI4_F55 is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_AMBAKMI=y +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +CONFIG_SERIO_ARC_PS2=m +# CONFIG_SERIO_APBPS2 is not set +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +# CONFIG_NOZOMI is not set +# CONFIG_ISI is not set +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +# CONFIG_SERIAL_8250_ASPEED_VUART is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_RT288X=y +# CONFIG_SERIAL_8250_MOXA is not set +CONFIG_SERIAL_OF_PLATFORM=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST=y +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +# CONFIG_SERIAL_JSM is not set +# CONFIG_SERIAL_MSM is not set +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +# CONFIG_SERIAL_XILINX_PS_UART is not set +# CONFIG_SERIAL_ARC is not set +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_CONEXANT_DIGICOLOR is not set +# CONFIG_SERIAL_DEV_BUS is not set +# CONFIG_TTY_PRINTK is not set +CONFIG_HVC_DRIVER=y +# CONFIG_HVC_DCC is not set +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +# CONFIG_IPMI_PANIC_EVENT is not set +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_SSIF=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_VIRTIO=m +CONFIG_HW_RANDOM_HISI=y +CONFIG_HW_RANDOM_XGENE=y +CONFIG_HW_RANDOM_CAVIUM=y +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_TCG_TPM=m +CONFIG_HW_RANDOM_TPM=y +CONFIG_TCG_TIS_CORE=m +# CONFIG_TCG_TIS is not set +CONFIG_TCG_TIS_SPI=m +# CONFIG_TCG_TIS_I2C_ATMEL is not set +# CONFIG_TCG_TIS_I2C_INFINEON is not set +# CONFIG_TCG_TIS_I2C_NUVOTON is not set +CONFIG_TCG_ATMEL=m +# CONFIG_TCG_INFINEON is not set +CONFIG_TCG_CRB=m +# CONFIG_TCG_VTPM_PROXY is not set +# CONFIG_TCG_TIS_ST33ZP24_I2C is not set +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +# CONFIG_DEVPORT is not set +# CONFIG_XILLYBUS is not set +CONFIG_HISI_SVM=y + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=m + +# +# Multiplexer I2C Chip support +# +CONFIG_I2C_ARB_GPIO_CHALLENGE=m +CONFIG_I2C_MUX_GPIO=m +# CONFIG_I2C_MUX_GPMUX is not set +# CONFIG_I2C_MUX_LTC4306 is not set +CONFIG_I2C_MUX_PCA9541=m +CONFIG_I2C_MUX_PCA954x=m +CONFIG_I2C_MUX_PINCTRL=m +# CONFIG_I2C_MUX_REG is not set +# CONFIG_I2C_DEMUX_PINCTRL is not set +CONFIG_I2C_MUX_MLXCPLD=m +# CONFIG_I2C_HELPER_AUTO is not set +CONFIG_I2C_SMBUS=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_HIX5HD2 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_NFORCE2=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# ACPI drivers +# +# CONFIG_I2C_SCMI is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CADENCE is not set +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +# CONFIG_I2C_EMEV2 is not set +CONFIG_I2C_GPIO=m +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set +# CONFIG_I2C_NOMADIK is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_QUP=m +# CONFIG_I2C_RK3X is not set +CONFIG_I2C_SIMTEC=m +CONFIG_I2C_VERSATILE=m +CONFIG_I2C_THUNDERX=m +# CONFIG_I2C_XILINX is not set +CONFIG_I2C_XLP9XX=m + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT_LIGHT=m +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +CONFIG_I2C_TINY_USB=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_XGENE_SLIMPRO=m +CONFIG_I2C_STUB=m +CONFIG_I2C_SLAVE=y +CONFIG_I2C_SLAVE_EEPROM=m +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_CADENCE=m +CONFIG_SPI_DESIGNWARE=y +CONFIG_SPI_DW_PCI=m +# CONFIG_SPI_DW_MID_DMA is not set +CONFIG_SPI_DW_MMIO=m +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_FSL_SPI is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_PL022=y +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_ROCKCHIP is not set +CONFIG_SPI_QUP=y +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_THUNDERX is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +CONFIG_SPI_XLP=m +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +CONFIG_PINCTRL=y +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +# CONFIG_PINCTRL_AMD is not set +# CONFIG_PINCTRL_MCP23S08 is not set +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PINCTRL_SX150X is not set +CONFIG_PINCTRL_MSM=y +# CONFIG_PINCTRL_APQ8064 is not set +# CONFIG_PINCTRL_APQ8084 is not set +# CONFIG_PINCTRL_IPQ4019 is not set +# CONFIG_PINCTRL_IPQ8064 is not set +# CONFIG_PINCTRL_IPQ8074 is not set +# CONFIG_PINCTRL_MSM8660 is not set +# CONFIG_PINCTRL_MSM8960 is not set +# CONFIG_PINCTRL_MDM9615 is not set +# CONFIG_PINCTRL_MSM8X74 is not set +# CONFIG_PINCTRL_MSM8916 is not set +# CONFIG_PINCTRL_MSM8994 is not set +# CONFIG_PINCTRL_MSM8996 is not set +# CONFIG_PINCTRL_MSM8998 is not set +CONFIG_PINCTRL_QDF2XXX=y +# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set +# CONFIG_PINCTRL_SDM845 is not set +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_OF_GPIO=y +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=y + +# +# Memory mapped GPIO drivers +# +# CONFIG_GPIO_74XX_MMIO is not set +# CONFIG_GPIO_ALTERA is not set +CONFIG_GPIO_AMDPT=m +CONFIG_GPIO_DWAPB=y +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_FTGPIO010 is not set +CONFIG_GPIO_GENERIC_PLATFORM=m +# CONFIG_GPIO_GRGPIO is not set +# CONFIG_GPIO_HLWD is not set +# CONFIG_GPIO_MB86S7X is not set +# CONFIG_GPIO_MOCKUP is not set +CONFIG_GPIO_PL061=y +# CONFIG_GPIO_SYSCON is not set +# CONFIG_GPIO_THUNDERX is not set +CONFIG_GPIO_XGENE=y +CONFIG_GPIO_XGENE_SB=m +# CONFIG_GPIO_XILINX is not set +CONFIG_GPIO_XLP=m + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_ADNP is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set + +# +# MFD GPIO expanders +# + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_BT8XX is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_74X164 is not set +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set + +# +# USB GPIO expanders +# +# CONFIG_W1 is not set +# CONFIG_POWER_AVS is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_BRCMSTB is not set +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_RESET_GPIO_RESTART=y +CONFIG_POWER_RESET_HISI=y +# CONFIG_POWER_RESET_MSM is not set +# CONFIG_POWER_RESET_LTC2952 is not set +CONFIG_POWER_RESET_RESTART=y +CONFIG_POWER_RESET_VEXPRESS=y +# CONFIG_POWER_RESET_XGENE is not set +CONFIG_POWER_RESET_SYSCON=y +# CONFIG_POWER_RESET_SYSCON_POWEROFF is not set +# CONFIG_SYSCON_REBOOT_MODE is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set +# CONFIG_BATTERY_BQ27XXX is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_LTC3651 is not set +# CONFIG_CHARGER_DETECTOR_MAX14656 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24190 is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +CONFIG_CHARGER_SMB347=m +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_AD7314=m +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +CONFIG_SENSORS_ADT7310=m +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_ARM_SCPI=m +# CONFIG_SENSORS_ASPEED is not set +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +# CONFIG_SENSORS_I5K_AMB is not set +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +# CONFIG_SENSORS_FTSTEUTATES is not set +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +CONFIG_SENSORS_G762=m +# CONFIG_SENSORS_GPIO_FAN is not set +# CONFIG_SENSORS_HIH6130 is not set +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +CONFIG_SENSORS_POWR1220=m +CONFIG_SENSORS_LINEAGE=m +CONFIG_SENSORS_LTC2945=m +# CONFIG_SENSORS_LTC2990 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +CONFIG_SENSORS_LTC4222=m +CONFIG_SENSORS_LTC4245=m +CONFIG_SENSORS_LTC4260=m +CONFIG_SENSORS_LTC4261=m +CONFIG_SENSORS_MAX1111=m +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +CONFIG_SENSORS_MAX31790=m +CONFIG_SENSORS_MCP3021=m +# CONFIG_SENSORS_TC654 is not set +CONFIG_SENSORS_ADCXX=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM70=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +CONFIG_SENSORS_NCT6683=m +CONFIG_SENSORS_NCT6775=m +CONFIG_SENSORS_NCT7802=m +CONFIG_SENSORS_NCT7904=m +# CONFIG_SENSORS_NPCM7XX is not set +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +# CONFIG_SENSORS_IBM_CFFPS is not set +# CONFIG_SENSORS_IR35221 is not set +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +CONFIG_SENSORS_LTC3815=m +CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX20751=m +# CONFIG_SENSORS_MAX31785 is not set +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_TPS40422=m +# CONFIG_SENSORS_TPS53679 is not set +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_PWM_FAN=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHT3x is not set +CONFIG_SENSORS_SHTC1=m +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +# CONFIG_SENSORS_EMC2103 is not set +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +CONFIG_SENSORS_ADC128D818=m +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +CONFIG_SENSORS_ADS7871=m +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +CONFIG_SENSORS_TC74=m +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +CONFIG_SENSORS_TMP103=m +# CONFIG_SENSORS_TMP108 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VEXPRESS=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83773G is not set +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_XGENE=m + +# +# ACPI drivers +# +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THERMAL_WRITABLE_TRIPS is not set +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +# CONFIG_THERMAL_GOV_BANG_BANG is not set +CONFIG_THERMAL_GOV_USER_SPACE=y +# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set +CONFIG_CPU_THERMAL=y +# CONFIG_THERMAL_EMULATION is not set +CONFIG_HISI_THERMAL=y +# CONFIG_QORIQ_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# + +# +# Qualcomm thermal drivers +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_SYSFS=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_GPIO_WATCHDOG=m +# CONFIG_WDAT_WDT is not set +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +CONFIG_ARM_SP805_WATCHDOG=m +CONFIG_ARM_SBSA_WATCHDOG=m +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_QCOM_WDT is not set +CONFIG_ALIM7101_WDT=m +CONFIG_I6300ESB_WDT=m +# CONFIG_MEN_A21_WDT is not set + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_BCMA=m +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=m +# CONFIG_MFD_ACT8945A is not set +# CONFIG_MFD_AS3711 is not set +# CONFIG_MFD_AS3722 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_ATMEL_FLEXCOM is not set +# CONFIG_MFD_ATMEL_HLCDC is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_BD9571MWV is not set +# CONFIG_MFD_AXP20X_I2C is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_MFD_HI6421_PMIC is not set +# CONFIG_MFD_HI655X_PMIC is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_LPC_ICH is not set +# CONFIG_LPC_SCH is not set +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77620 is not set +# CONFIG_MFD_MAX77686 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_CPCAP is not set +# CONFIG_MFD_VIPERBOARD is not set +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_QCOM_RPM is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_RK808 is not set +# CONFIG_MFD_RN5T618 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_STMPE is not set +CONFIG_MFD_SYSCON=y +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TPS65217 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TI_LP87565 is not set +# CONFIG_MFD_TPS65218 is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +# CONFIG_MFD_TC3589X is not set +# CONFIG_MFD_VX855 is not set +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_ROHM_BD718XX is not set +# CONFIG_MFD_VEXPRESS_SYSREG is not set +# CONFIG_REGULATOR is not set +# CONFIG_RC_CORE is not set +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +# CONFIG_MEDIA_ANALOG_TV_SUPPORT is not set +# CONFIG_MEDIA_DIGITAL_TV_SUPPORT is not set +# CONFIG_MEDIA_RADIO_SUPPORT is not set +# CONFIG_MEDIA_SDR_SUPPORT is not set +# CONFIG_MEDIA_CEC_SUPPORT is not set +CONFIG_MEDIA_CONTROLLER=y +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_SUBDEV_API=y +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_ADV_DEBUG=y +CONFIG_VIDEO_FIXED_MINOR_RANGES=y +# CONFIG_V4L2_FLASH_LED_CLASS is not set + +# +# Media drivers +# +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +# CONFIG_USB_GSPCA is not set +# CONFIG_USB_PWC is not set +# CONFIG_VIDEO_CPIA2 is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_MEDIA_PCI_SUPPORT is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set + +# +# Supported MMC/SDIO adapters +# +# CONFIG_CYPRESS_FIRMWARE is not set +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set + +# +# I2C Encoders, decoders, sensors and other helper chips +# + +# +# Audio decoders, processors and mixers +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS3308 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_UDA1342 is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set +# CONFIG_VIDEO_SONY_BTF_MPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_ADV7183 is not set +# CONFIG_VIDEO_ADV748X is not set +# CONFIG_VIDEO_ADV7604 is not set +# CONFIG_VIDEO_ADV7842 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_ML86V7667 is not set +# CONFIG_VIDEO_AD5820 is not set +# CONFIG_VIDEO_AK7375 is not set +# CONFIG_VIDEO_DW9714 is not set +# CONFIG_VIDEO_DW9807_VCM is not set +# CONFIG_VIDEO_SAA7110 is not set +# CONFIG_VIDEO_SAA711X is not set +# CONFIG_VIDEO_TC358743 is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set +# CONFIG_VIDEO_TW2804 is not set +# CONFIG_VIDEO_TW9903 is not set +# CONFIG_VIDEO_TW9906 is not set +# CONFIG_VIDEO_TW9910 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_CX25840 is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_ADV7343 is not set +# CONFIG_VIDEO_ADV7393 is not set +# CONFIG_VIDEO_ADV7511 is not set +# CONFIG_VIDEO_AD9389B is not set +# CONFIG_VIDEO_AK881X is not set +# CONFIG_VIDEO_THS8200 is not set + +# +# Camera sensor devices +# +# CONFIG_VIDEO_IMX258 is not set +# CONFIG_VIDEO_IMX274 is not set +# CONFIG_VIDEO_OV2640 is not set +# CONFIG_VIDEO_OV2659 is not set +# CONFIG_VIDEO_OV2680 is not set +# CONFIG_VIDEO_OV2685 is not set +# CONFIG_VIDEO_OV5640 is not set +# CONFIG_VIDEO_OV5645 is not set +# CONFIG_VIDEO_OV5647 is not set +# CONFIG_VIDEO_OV6650 is not set +# CONFIG_VIDEO_OV5670 is not set +# CONFIG_VIDEO_OV5695 is not set +# CONFIG_VIDEO_OV7251 is not set +# CONFIG_VIDEO_OV772X is not set +# CONFIG_VIDEO_OV7640 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_OV7740 is not set +# CONFIG_VIDEO_OV9650 is not set +# CONFIG_VIDEO_OV13858 is not set +# CONFIG_VIDEO_VS6624 is not set +# CONFIG_VIDEO_MT9M032 is not set +# CONFIG_VIDEO_MT9M111 is not set +# CONFIG_VIDEO_MT9P031 is not set +# CONFIG_VIDEO_MT9T001 is not set +# CONFIG_VIDEO_MT9T112 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_MT9V032 is not set +# CONFIG_VIDEO_MT9V111 is not set +# CONFIG_VIDEO_SR030PC30 is not set +# CONFIG_VIDEO_NOON010PC30 is not set +# CONFIG_VIDEO_M5MOLS is not set +# CONFIG_VIDEO_RJ54N1 is not set +# CONFIG_VIDEO_S5K6AA is not set +# CONFIG_VIDEO_S5K6A3 is not set +# CONFIG_VIDEO_S5K4ECGX is not set +# CONFIG_VIDEO_S5K5BAF is not set +# CONFIG_VIDEO_SMIAPP is not set +# CONFIG_VIDEO_ET8EK8 is not set +# CONFIG_VIDEO_S5C73M3 is not set + +# +# Flash devices +# +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set + +# +# Audio/Video compression chips +# +# CONFIG_VIDEO_SAA6752HS is not set + +# +# SDR tuner chips +# + +# +# Miscellaneous helper chips +# +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_I2C is not set + +# +# Sensors used on soc_camera driver +# + +# +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set + +# +# Media SPI Adapters +# + +# +# Customise DVB Frontends +# + +# +# Tools to develop new frontends +# + +# +# Graphics support +# +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=64 +CONFIG_DRM=y +CONFIG_DRM_DP_AUX_CHARDEV=y +# CONFIG_DRM_DEBUG_MM is not set +# CONFIG_DRM_DEBUG_SELFTEST is not set +CONFIG_DRM_KMS_HELPER=y +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +# CONFIG_DRM_DP_CEC is not set +CONFIG_DRM_TTM=y +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +# CONFIG_DRM_I2C_SIL164 is not set +CONFIG_DRM_I2C_NXP_TDA998X=m +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# CONFIG_DRM_HDLCD is not set +# CONFIG_DRM_MALI_DISPLAY is not set +CONFIG_DRM_RADEON=m +CONFIG_DRM_RADEON_USERPTR=y +CONFIG_DRM_AMDGPU=m +# CONFIG_DRM_AMDGPU_SI is not set +CONFIG_DRM_AMDGPU_CIK=y +CONFIG_DRM_AMDGPU_USERPTR=y +# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set + +# +# ACP (Audio CoProcessor) Configuration +# +# CONFIG_DRM_AMD_ACP is not set + +# +# Display Engine Configuration +# +CONFIG_DRM_AMD_DC=y +# CONFIG_DEBUG_KERNEL_DC is not set + +# +# AMD Library routines +# +CONFIG_CHASH=m +# CONFIG_CHASH_STATS is not set +# CONFIG_CHASH_SELFTEST is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +# CONFIG_NOUVEAU_DEBUG_MMU is not set +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +# CONFIG_DRM_VGEM is not set +# CONFIG_DRM_VKMS is not set +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +# CONFIG_DRM_RCAR_DW_HDMI is not set +# CONFIG_DRM_RCAR_LVDS is not set +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +# CONFIG_DRM_MSM is not set +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_ARM_VERSATILE is not set +# CONFIG_DRM_PANEL_LVDS is not set +# CONFIG_DRM_PANEL_SIMPLE is not set +# CONFIG_DRM_PANEL_ILITEK_IL9322 is not set +# CONFIG_DRM_PANEL_SAMSUNG_LD9040 is not set +# CONFIG_DRM_PANEL_LG_LG4573 is not set +# CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0 is not set +# CONFIG_DRM_PANEL_SEIKO_43WVF1G is not set +# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +# CONFIG_DRM_CDNS_DSI is not set +# CONFIG_DRM_DUMB_VGA_DAC is not set +# CONFIG_DRM_LVDS_ENCODER is not set +# CONFIG_DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW is not set +# CONFIG_DRM_NXP_PTN3460 is not set +# CONFIG_DRM_PARADE_PS8622 is not set +# CONFIG_DRM_SIL_SII8620 is not set +# CONFIG_DRM_SII902X is not set +# CONFIG_DRM_SII9234 is not set +# CONFIG_DRM_THINE_THC63LVD1024 is not set +# CONFIG_DRM_TOSHIBA_TC358767 is not set +# CONFIG_DRM_TI_TFP410 is not set +# CONFIG_DRM_I2C_ADV7511 is not set +# CONFIG_DRM_ARCPGU is not set +CONFIG_DRM_HISI_HIBMC=y +# CONFIG_DRM_HISI_KIRIN is not set +# CONFIG_DRM_MXSFB is not set +# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_PL111 is not set +# CONFIG_DRM_LEGACY is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y + +# +# Frame buffer Devices +# +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_BACKLIGHT=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_EFI=y +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_SIMPLE=y +CONFIG_FB_SSD1307=m +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=m +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_OTM3225A is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_BACKLIGHT_PWM=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +CONFIG_BACKLIGHT_GPIO=m +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +CONFIG_VIDEOMODE_HELPERS=y +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +# CONFIG_SND is not set + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=m +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +# CONFIG_HID_ACCUTOUCH is not set +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +CONFIG_HID_APPLE=y +CONFIG_HID_APPLEIR=m +# CONFIG_HID_ASUS is not set +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=y +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CORSAIR=m +# CONFIG_HID_COUGAR is not set +# CONFIG_HID_CMEDIA is not set +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=m +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EMS_FF is not set +# CONFIG_HID_ELAN is not set +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=y +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +# CONFIG_HOLTEK_FF is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_ITE=y +# CONFIG_HID_JABRA is not set +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LCPOWER=m +CONFIG_HID_LED=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=y +CONFIG_HID_LOGITECH_DJ=m +CONFIG_HID_LOGITECH_HIDPP=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +CONFIG_HID_MAGICMOUSE=y +# CONFIG_HID_MAYFLASH is not set +# CONFIG_HID_REDRAGON is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_MULTITOUCH=m +# CONFIG_HID_NTI is not set +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +# CONFIG_HID_RETRODE is not set +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +# CONFIG_HID_STEAM is not set +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_HID_UDRAW_PS3 is not set +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +# CONFIG_ZEROPLUS_FF is not set +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=m +# CONFIG_HID_SENSOR_CUSTOM_SENSOR is not set +# CONFIG_HID_ALPS is not set + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +CONFIG_I2C_HID=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_PCI=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_LEDS_TRIGGER_USBPORT=m +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +# CONFIG_USB_XHCI_DBGCAP is not set +CONFIG_USB_XHCI_PCI=y +CONFIG_USB_XHCI_PLATFORM=m +# CONFIG_USB_XHCI_HISTB is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_SIMPLE=m +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +# CONFIG_USB_SERIAL_F81232 is not set +# CONFIG_USB_SERIAL_F8153X is not set +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_METRO is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7840=m +# CONFIG_USB_SERIAL_MXUPORT is not set +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +# CONFIG_USB_SERIAL_WISHBONE is not set +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +# CONFIG_USB_SERIAL_UPD78F0730 is not set +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set +CONFIG_USB_IOWARRIOR=m +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +CONFIG_USB_ISIGHTFW=m +# CONFIG_USB_YUREX is not set +CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_HUB_USB251XB is not set +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +CONFIG_USB_CHAOSKEY=m +CONFIG_USB_ATM=m +# CONFIG_USB_SPEEDTOUCH is not set +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m + +# +# USB Physical Layer drivers +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +# CONFIG_USB_ULPI is not set +# CONFIG_USB_GADGET is not set +CONFIG_TYPEC=y +# CONFIG_TYPEC_TCPM is not set +CONFIG_TYPEC_UCSI=y +CONFIG_UCSI_ACPI=y +# CONFIG_TYPEC_TPS6598X is not set + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +# CONFIG_TYPEC_MUX_PI3USB30532 is not set + +# +# USB Type-C Alternate Mode drivers +# +# CONFIG_TYPEC_DP_ALTMODE is not set +# CONFIG_USB_ROLE_SWITCH is not set +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=m +CONFIG_PWRSEQ_EMMC=m +CONFIG_PWRSEQ_SIMPLE=m +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_ARMMMCI=m +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI_ACPI=m +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_OF_ARASAN is not set +# CONFIG_MMC_SDHCI_OF_AT91 is not set +# CONFIG_MMC_SDHCI_OF_DWCMSHC is not set +CONFIG_MMC_SDHCI_CADENCE=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set +# CONFIG_MMC_SDHCI_MSM is not set +CONFIG_MMC_TIFM_SD=m +CONFIG_MMC_SPI=m +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_DW=m +CONFIG_MMC_DW_PLTFM=m +CONFIG_MMC_DW_BLUEFIELD=m +# CONFIG_MMC_DW_EXYNOS is not set +# CONFIG_MMC_DW_HI3798CV200 is not set +# CONFIG_MMC_DW_K3 is not set +# CONFIG_MMC_DW_PCI is not set +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_CQHCI=m +CONFIG_MMC_TOSHIBA_PCI=m +CONFIG_MMC_MTK=m +CONFIG_MMC_SDHCI_XENON=m +# CONFIG_MMC_SDHCI_OMAP is not set +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +# CONFIG_MS_BLOCK is not set + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_CLASS_FLASH=m +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set + +# +# LED drivers +# +# CONFIG_LEDS_AAT1290 is not set +# CONFIG_LEDS_AS3645A is not set +# CONFIG_LEDS_BCM6328 is not set +# CONFIG_LEDS_BCM6358 is not set +# CONFIG_LEDS_CR0014114 is not set +CONFIG_LEDS_LM3530=m +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_LM3692X is not set +# CONFIG_LEDS_LM3601X is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=m +# CONFIG_LEDS_LP3952 is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_LP5523 is not set +# CONFIG_LEDS_LP5562 is not set +# CONFIG_LEDS_LP8501 is not set +# CONFIG_LEDS_LP8860 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set +# CONFIG_LEDS_KTD2692 is not set +# CONFIG_LEDS_IS31FL319X is not set +# CONFIG_LEDS_IS31FL32XX is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +CONFIG_LEDS_BLINKM=m +# CONFIG_LEDS_SYSCON is not set +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +# CONFIG_LEDS_TRIGGER_DISK is not set +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_CPU is not set +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ON_DEMAND_PAGING=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y +# CONFIG_INFINIBAND_MTHCA is not set +# CONFIG_INFINIBAND_QIB is not set +CONFIG_INFINIBAND_CXGB4=m +CONFIG_INFINIBAND_I40IW=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +# CONFIG_INFINIBAND_NES is not set +# CONFIG_INFINIBAND_OCRDMA is not set +CONFIG_INFINIBAND_HNS=m +CONFIG_INFINIBAND_HNS_HIP06=m +CONFIG_INFINIBAND_HNS_HIP08=m +# CONFIG_INFINIBAND_HNS_DFX is not set +# CONFIG_INFINIBAND_HNS_TEST is not set +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_INFINIBAND_RDMAVT=m +CONFIG_RDMA_RXE=m +CONFIG_INFINIBAND_QEDR=m +CONFIG_INFINIBAND_BNXT_RE=m +CONFIG_EDAC_SUPPORT=y +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_GHES=y +CONFIG_EDAC_THUNDERX=m +CONFIG_EDAC_XGENE=m +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_SYSTOHC is not set +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +CONFIG_RTC_DRV_ABB5ZES3=m +CONFIG_RTC_DRV_ABX80X=m +CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1307_CENTURY is not set +CONFIG_RTC_DRV_DS1374=m +CONFIG_RTC_DRV_DS1374_WDT=y +CONFIG_RTC_DRV_DS1672=m +# CONFIG_RTC_DRV_HYM8563 is not set +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +# CONFIG_RTC_DRV_ISL12026 is not set +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8523=m +CONFIG_RTC_DRV_PCF85063=m +# CONFIG_RTC_DRV_PCF85363 is not set +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8010=m +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +CONFIG_RTC_DRV_RV8803=m + +# +# SPI RTC drivers +# +CONFIG_RTC_DRV_M41T93=m +CONFIG_RTC_DRV_M41T94=m +# CONFIG_RTC_DRV_DS1302 is not set +CONFIG_RTC_DRV_DS1305=m +CONFIG_RTC_DRV_DS1343=m +CONFIG_RTC_DRV_DS1347=m +CONFIG_RTC_DRV_DS1390=m +# CONFIG_RTC_DRV_MAX6916 is not set +CONFIG_RTC_DRV_R9701=m +CONFIG_RTC_DRV_RX4581=m +# CONFIG_RTC_DRV_RX6110 is not set +CONFIG_RTC_DRV_RS5C348=m +CONFIG_RTC_DRV_MAX6902=m +CONFIG_RTC_DRV_PCF2123=m +CONFIG_RTC_DRV_MCP795=m +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_DS3232_HWMON=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_RV3029C2=m +# CONFIG_RTC_DRV_RV3029_HWMON is not set + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +CONFIG_RTC_DRV_DS1685_FAMILY=m +CONFIG_RTC_DRV_DS1685=y +# CONFIG_RTC_DRV_DS1689 is not set +# CONFIG_RTC_DRV_DS17285 is not set +# CONFIG_RTC_DRV_DS17485 is not set +# CONFIG_RTC_DRV_DS17885 is not set +# CONFIG_RTC_DS1685_PROC_REGS is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_STK17TA8=m +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m +# CONFIG_RTC_DRV_ZYNQMP is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_PL030 is not set +CONFIG_RTC_DRV_PL031=y +# CONFIG_RTC_DRV_FTRTC010 is not set +# CONFIG_RTC_DRV_SNVS is not set +# CONFIG_RTC_DRV_XGENE is not set +# CONFIG_RTC_DRV_R7301 is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ACPI=y +CONFIG_DMA_OF=y +# CONFIG_ALTERA_MSGDMA is not set +# CONFIG_AMBA_PL08X is not set +# CONFIG_BCM_SBA_RAID is not set +# CONFIG_DW_AXI_DMAC is not set +# CONFIG_FSL_EDMA is not set +# CONFIG_INTEL_IDMA64 is not set +# CONFIG_K3_DMA is not set +# CONFIG_MV_XOR_V2 is not set +# CONFIG_PL330_DMA is not set +# CONFIG_XGENE_DMA is not set +# CONFIG_XILINX_DMA is not set +# CONFIG_XILINX_ZYNQMP_DMA is not set +# CONFIG_QCOM_BAM_DMA is not set +CONFIG_QCOM_HIDMA_MGMT=m +CONFIG_QCOM_HIDMA=m +CONFIG_DW_DMAC_CORE=m +CONFIG_DW_DMAC=m +CONFIG_DW_DMAC_PCI=m + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +CONFIG_AUXDISPLAY=y +# CONFIG_HD44780 is not set +# CONFIG_IMG_ASCII_LCD is not set +# CONFIG_HT16K33 is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_DMEM_GENIRQ is not set +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +# CONFIG_UIO_NETX is not set +# CONFIG_UIO_PRUSS is not set +# CONFIG_UIO_MF624 is not set +CONFIG_VFIO_IOMMU_TYPE1=m +CONFIG_VFIO_VIRQFD=m +CONFIG_VFIO=m +CONFIG_VFIO_NOIOMMU=y +CONFIG_VFIO_PCI=m +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +CONFIG_VFIO_PLATFORM=m +# CONFIG_VFIO_AMBA is not set +# CONFIG_VFIO_PLATFORM_CALXEDAXGMAC_RESET is not set +# CONFIG_VFIO_PLATFORM_AMDXGBE_RESET is not set +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=m +CONFIG_VIRTIO_MENU=y +CONFIG_VIRTIO_PCI=m +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +CONFIG_VIRTIO_MMIO=m +# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set + +# +# Microsoft Hyper-V guest support +# +# CONFIG_STAGING is not set +# CONFIG_GOLDFISH is not set +CONFIG_CHROME_PLATFORMS=y +# CONFIG_CHROMEOS_TBMC is not set +# CONFIG_CROS_KBD_LED_BACKLIGHT is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +CONFIG_COMMON_CLK_VERSATILE=y +CONFIG_CLK_SP810=y +CONFIG_CLK_VEXPRESS_OSC=y +# CONFIG_CLK_HSDK is not set +# CONFIG_COMMON_CLK_MAX9485 is not set +CONFIG_COMMON_CLK_SCPI=m +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI514 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_SI570 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CDCE925 is not set +# CONFIG_COMMON_CLK_CS2000_CP is not set +# CONFIG_CLK_QORIQ is not set +CONFIG_COMMON_CLK_XGENE=y +# CONFIG_COMMON_CLK_PWM is not set +# CONFIG_COMMON_CLK_VC5 is not set +CONFIG_COMMON_CLK_HI3516CV300=y +CONFIG_COMMON_CLK_HI3519=y +CONFIG_COMMON_CLK_HI3660=y +CONFIG_COMMON_CLK_HI3798CV200=y +# CONFIG_COMMON_CLK_HI6220 is not set +CONFIG_RESET_HISI=y +CONFIG_STUB_CLK_HI3660=y +# CONFIG_COMMON_CLK_QCOM is not set +CONFIG_HWSPINLOCK=y +# CONFIG_HWSPINLOCK_QCOM is not set + +# +# Clock Source drivers +# +CONFIG_TIMER_OF=y +CONFIG_TIMER_ACPI=y +CONFIG_TIMER_PROBE=y +CONFIG_CLKSRC_MMIO=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y +CONFIG_FSL_ERRATUM_A008585=y +CONFIG_HISILICON_ERRATUM_161010101=y +CONFIG_ARM64_ERRATUM_858921=y +CONFIG_ARM_TIMER_SP804=y +CONFIG_MAILBOX=y +CONFIG_ARM_MHU=m +# CONFIG_PLATFORM_MHU is not set +# CONFIG_PL320_MBOX is not set +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +CONFIG_HI3660_MBOX=y +CONFIG_HI6220_MBOX=y +# CONFIG_MAILBOX_TEST is not set +# CONFIG_QCOM_APCS_IPC is not set +CONFIG_XGENE_SLIMPRO_MBOX=m +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# +CONFIG_IOMMU_IO_PGTABLE=y +CONFIG_IOMMU_IO_PGTABLE_LPAE=y +# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set +# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set + +# +# Generic PASID table support +# +CONFIG_IOMMU_PASID_TABLE=y +CONFIG_ARM_SMMU_V3_CONTEXT=y +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set +CONFIG_IOMMU_IOVA=y +CONFIG_OF_IOMMU=y +CONFIG_IOMMU_DMA=y +CONFIG_IOMMU_SVA=y +CONFIG_IOMMU_PAGE_FAULT=y +CONFIG_ARM_SMMU=y +CONFIG_ARM_SMMU_V3=y +# CONFIG_QCOM_IOMMU is not set + +# +# Remoteproc drivers +# +# CONFIG_REMOTEPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +# CONFIG_RPMSG_VIRTIO is not set +# CONFIG_SOUNDWIRE is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Amlogic SoC drivers +# + +# +# Broadcom SoC drivers +# +# CONFIG_SOC_BRCMSTB is not set + +# +# NXP/Freescale QorIQ SoC drivers +# + +# +# i.MX SoC drivers +# + +# +# Qualcomm SoC drivers +# +# CONFIG_QCOM_COMMAND_DB is not set +# CONFIG_QCOM_GENI_SE is not set +# CONFIG_QCOM_GSBI is not set +# CONFIG_QCOM_LLCC is not set +# CONFIG_QCOM_RMTFS_MEM is not set +# CONFIG_QCOM_RPMH is not set +# CONFIG_QCOM_SMEM is not set +# CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +CONFIG_SOC_HISILICON_LBC=m +CONFIG_SOC_HISILICON_SYSCTL=m +# CONFIG_PM_DEVFREQ is not set +CONFIG_EXTCON=y + +# +# Extcon Device Drivers +# +CONFIG_EXTCON_GPIO=m +# CONFIG_EXTCON_MAX3355 is not set +# CONFIG_EXTCON_QCOM_SPMI_MISC is not set +# CONFIG_EXTCON_RT8973A is not set +# CONFIG_EXTCON_SM5502 is not set +# CONFIG_EXTCON_USB_GPIO is not set +# CONFIG_MEMORY is not set +# CONFIG_IIO is not set +# CONFIG_NTB is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +# CONFIG_PWM_FSL_FTM is not set +# CONFIG_PWM_HIBVT is not set +# CONFIG_PWM_PCA9685 is not set + +# +# IRQ chip support +# +CONFIG_IRQCHIP=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GIC_MAX_NR=1 +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +CONFIG_HISILICON_IRQ_MBIGEN=y +CONFIG_PARTITION_PERCPU=y +CONFIG_QCOM_IRQ_COMBINER=y +# CONFIG_QCOM_PDC is not set +# CONFIG_IPACK_BUS is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_RESET_QCOM_AOSS is not set +# CONFIG_RESET_TI_SYSCON is not set +CONFIG_COMMON_RESET_HI3660=y +CONFIG_COMMON_RESET_HI6220=y +CONFIG_FMC=m +CONFIG_FMC_FAKEDEV=m +CONFIG_FMC_TRIVIAL=m +CONFIG_FMC_WRITE_EEPROM=m +CONFIG_FMC_CHARDEV=m + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +CONFIG_PHY_XGENE=y +# CONFIG_BCM_KONA_USB2_PHY is not set +CONFIG_PHY_HI6220_USB=m +# CONFIG_PHY_HISTB_COMBPHY is not set +# CONFIG_PHY_HISI_INNO_USB2 is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_MAPPHONE_MDM6600 is not set +# CONFIG_PHY_QCOM_APQ8064_SATA is not set +# CONFIG_PHY_QCOM_IPQ806X_SATA is not set +# CONFIG_PHY_QCOM_QMP is not set +# CONFIG_PHY_QCOM_QUSB2 is not set +# CONFIG_PHY_QCOM_UFS is not set +# CONFIG_PHY_QCOM_USB_HS is not set +# CONFIG_PHY_QCOM_USB_HSIC is not set +# CONFIG_PHY_TUSB1210 is not set +# CONFIG_POWERCAP is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +# CONFIG_ARM_CCI_PMU is not set +CONFIG_ARM_CCN=y +CONFIG_ARM_PMU=y +CONFIG_ARM_PMU_ACPI=y +CONFIG_ARM_SMMU_V3_PMU=y +# CONFIG_ARM_DSU_PMU is not set +CONFIG_HISI_PMU=y +CONFIG_QCOM_L2_PMU=y +CONFIG_QCOM_L3_PMU=y +CONFIG_XGENE_PMU=y +CONFIG_ARM_SPE_PMU=y +CONFIG_RAS=y + +# +# Android +# +# CONFIG_ANDROID is not set +CONFIG_LIBNVDIMM=m +CONFIG_BLK_DEV_PMEM=m +CONFIG_ND_BLK=m +CONFIG_ND_CLAIM=y +CONFIG_ND_BTT=m +CONFIG_BTT=y +CONFIG_OF_PMEM=m +CONFIG_DAX_DRIVER=y +CONFIG_DAX=y +CONFIG_DEV_DAX=m +CONFIG_NVMEM=y +# CONFIG_QCOM_QFPROM is not set + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# CONFIG_FPGA is not set +# CONFIG_FSI is not set +CONFIG_TEE=m + +# +# TEE drivers +# +# CONFIG_OPTEE is not set +# CONFIG_SIOX is not set +# CONFIG_UACCE is not set +# CONFIG_SLIMBUS is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_FS_IOMAP=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_USE_FOR_EXT2=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_ONLINE_SCRUB is not set +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_FS_DAX=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_EXPORTFS_BLOCK_OPS=y +CONFIG_FILE_LOCKING=y +CONFIG_MANDATORY_FILE_LOCKING=y +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_FAT_DEFAULT_UTF8 is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_CHILDREN=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_CRAMFS_MTD is not set +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_FILE_CACHE=y +# CONFIG_SQUASHFS_FILE_DIRECT is not set +CONFIG_SQUASHFS_DECOMP_SINGLE=y +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +CONFIG_SQUASHFS_LZ4=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_FTRACE is not set +CONFIG_PSTORE_RAM=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V2=m +CONFIG_NFS_V3=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +# CONFIG_NFSD_BLOCKLAYOUT is not set +# CONFIG_NFSD_SCSILAYOUT is not set +# CONFIG_NFSD_FLEXFILELAYOUT is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=m +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_CEPH_FS=m +# CONFIG_CEPH_FSCACHE is not set +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set +CONFIG_CIFS_DFS_UPCALL=y +# CONFIG_CIFS_SMB_DIRECT is not set +# CONFIG_CIFS_FSCACHE is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +# CONFIG_DLM is not set +CONFIG_RESCTRL=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_TRUSTED_KEYS=m +CONFIG_ENCRYPTED_KEYS=m +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_WRITABLE_HOOKS=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_SECURITY_INFINIBAND=y +CONFIG_SECURITY_NETWORK_XFRM=y +CONFIG_SECURITY_PATH=y +CONFIG_LSM_MMAP_MIN_ADDR=65535 +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_HARDENED_USERCOPY_FALLBACK=y +# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set +CONFIG_FORTIFY_SOURCE=y +# CONFIG_STATIC_USERMODEHELPER is not set +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +CONFIG_SECURITY_YAMA=y +# CONFIG_INTEGRITY is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_RSA=y +# CONFIG_CRYPTO_DH is not set +# CONFIG_CRYPTO_ECDH is not set +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=m +# CONFIG_CRYPTO_MCRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_SIMD=m +CONFIG_CRYPTO_ENGINE=m + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=m +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_AEGIS128L is not set +# CONFIG_CRYPTO_AEGIS256 is not set +# CONFIG_CRYPTO_MORUS640 is not set +# CONFIG_CRYPTO_MORUS1280 is not set +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_ECHAINIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CFB is not set +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_POLY1305=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +# CONFIG_CRYPTO_SM3 is not set +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_CHACHA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SM4=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_842 is not set +CONFIG_CRYPTO_LZ4=m +CONFIG_CRYPTO_LZ4HC=m +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_HASH=y +CONFIG_CRYPTO_DRBG_CTR=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_USER_API=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=y +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_CCP=y +CONFIG_CRYPTO_DEV_CCP_DD=m +CONFIG_CRYPTO_DEV_SP_CCP=y +CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +CONFIG_CRYPTO_DEV_CPT=m +CONFIG_CAVIUM_CPT=m +# CONFIG_CRYPTO_DEV_NITROX_CNN55XX is not set +CONFIG_CRYPTO_DEV_CAVIUM_ZIP=m +# CONFIG_CRYPTO_DEV_QCE is not set +# CONFIG_CRYPTO_DEV_QCOM_RNG is not set +CONFIG_CRYPTO_DEV_CHELSIO=m +CONFIG_CHELSIO_IPSEC_INLINE=y +# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set +CONFIG_CRYPTO_DEV_VIRTIO=m +# CONFIG_CRYPTO_DEV_CCREE is not set +# CONFIG_CRYPTO_DEV_HISI_SEC is not set +# CONFIG_CRYPTO_DEV_HISI_ZIP is not set +# CONFIG_CRYPTO_DEV_HISI_HPRE is not set +# CONFIG_CRYPTO_DEV_HISI_SEC2 is not set +# CONFIG_CRYPTO_DEV_HISI_RDE is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +CONFIG_SIGNED_PE_FILE_VERIFICATION=y + +# +# Certificates for signature checking +# +CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_INDIRECT_PIO=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +CONFIG_CRC64=m +# CONFIG_CRC4 is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +CONFIG_XXHASH=y +CONFIG_AUDIT_GENERIC=y +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +CONFIG_AUDIT_COMPAT_GENERIC=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_COMPRESS=m +CONFIG_LZ4HC_COMPRESS=m +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_ENC8=y +CONFIG_REED_SOLOMON_DEC8=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_VIRT_OPS=y +CONFIG_SWIOTLB=y +CONFIG_SGL_ALLOC=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_CORDIC=m +# CONFIG_DDR is not set +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_LIBFDT=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_SBITMAP=y +# CONFIG_STRING_SELFTEST is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SDEI_WATCHDOG=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_ON_OOPS_VALUE=1 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_INFO=y +CONFIG_SCHEDSTATS=y +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +CONFIG_STACKTRACE=y +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_PREEMPTIRQ_EVENTS is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_HWLAT_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENTS=y +CONFIG_UPROBE_EVENTS=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +# CONFIG_FUNCTION_PROFILER is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +CONFIG_TRACING_MAP=y +CONFIG_HIST_TRIGGERS=y +# CONFIG_TRACEPOINT_BENCHMARK is not set +CONFIG_RING_BUFFER_BENCHMARK=m +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_TRACE_EVAL_MAP_FILE is not set +# CONFIG_TRACING_EVENTS_GPIO is not set +# CONFIG_DMA_API_DEBUG is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +CONFIG_TEST_KSTRTOX=y +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_MEMTEST is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +CONFIG_KGDB_TESTS=y +# CONFIG_KGDB_TESTS_ON_BOOT is not set +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x0 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +CONFIG_IO_STRICT_DEVMEM=y +# CONFIG_ARM64_PTDUMP_DEBUGFS is not set +# CONFIG_PID_IN_CONTEXTIDR is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +# CONFIG_DEBUG_WX is not set +# CONFIG_DEBUG_ALIGN_RODATA is not set +# CONFIG_DEBUG_EFI is not set +# CONFIG_ARM64_RELOC_TEST is not set +# CONFIG_CORESIGHT is not set -- 2.20.1

1 0

[PATCH] testing for the kernel mailing list
by Xie XiuQi 10 Jan '20

10 Jan '20

Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- test | 1 + 1 file changed, 1 insertion(+) create mode 100644 test diff --git a/test b/test new file mode 100644 index 000000000000..53ca61d8b869 --- /dev/null +++ b/test @@ -0,0 +1 @@ +testing for the mailing list -- 2.20.1

1 0

[PATCH] testing for the kernel mailing list
by Xie XiuQi 10 Jan '20

10 Jan '20

Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- test | 1 + 1 file changed, 1 insertion(+) create mode 100644 test diff --git a/test b/test new file mode 100644 index 000000000000..53ca61d8b869 --- /dev/null +++ b/test @@ -0,0 +1 @@ +testing for the mailing list -- 2.20.1

1 0

testing for mailing list
by Xie XiuQi 10 Jan '20

10 Jan '20

Hope it works well ;-)

1 0

[PATCH 00/75] bcache backport for openEuler-1.0 upto 20200104
by Coly Li 08 Jan '20

08 Jan '20

Hi openEler kernel maintainer, This is the bcache backport since Linux v4.19 to v5.5 for openEuler-10 kernel. All the patches are based on openEuler-1.0 commit cf975ca6a64a ("Document: add guideline to submitting patches to openEuler"). This patch set survives for 2+ hours smoking test on a 48x2 cores Taishan machine. Pleasse review and consider to pick them. Thanks in advance. Coly Li --- Andrea Righi (1): bcache: fix deadlock in bcache_allocator Christoph Hellwig (2): bcache: remove the extra cflags for request.o bcache: don't export symbols Colin Ian King (1): bcache: fix indentation issue, remove tabs on a hunk of code Coly Li (50): bcache: fix typo in code comments of closure_return_with_destructor() bcache: introduce force_wake_up_gc() bcache: option to automatically run gc thread after writeback bcache: add MODULE_DESCRIPTION information bcache: make cutoff_writeback and cutoff_writeback_sync tunable bcache: set writeback_percent in a flexible range bcache: not use hard coded memset size in bch_cache_accounting_clear() bcache: export backing_dev_name via sysfs bcache: export backing_dev_uuid via sysfs bcache: fix input integer overflow of congested threshold bcache: add sysfs_strtoul_bool() for setting bit-field variables bcache: use sysfs_strtoul_bool() to set bit-field variables bcache: fix input overflow to writeback_delay bcache: fix input overflow to journal_delay_ms bcache: fix input overflow to cache set io_error_limit bcache: move definition of 'int ret' out of macro read_bucket() bcache: add comments for kobj release callback routine bcache: add error check for calling register_bdev() bcache: Add comments for blkdev_put() in registration code path bcache: add comments for closure_fn to be called in closure_queue() bcache: improve bcache_reboot() bcache: don't set max writeback rate if gc is running bcache: fix return value error in bch_journal_read() bcache: avoid flushing btree node in cache_set_flush() if io disabled bcache: add io error counting in write_bdev_super_endio() bcache: remove unnecessary prefetch() in bset_search_tree() bcache: add return value check to bch_cached_dev_run() bcache: remove unncessary code in bch_btree_keys_init() bcache: more detailed error message to bcache_device_link() bcache: add more error message in bch_cached_dev_attach() bcache: improve error message in bch_cached_dev_run() bcache: remove "XXX:" comment line from run_cache_set() bcache: make bset_search_tree() be more understandable bcache: add pendings_cleanup to stop pending bcache device bcache: stop writeback kthread and kworker when bch_cached_dev_run() failed bcache: avoid a deadlock in bcache_reboot() bcache: acquire bch_register_lock later in cached_dev_detach_finish() bcache: add code comments for journal_read_bucket() bcache: set largest seq to ja->seq[bucket_index] in journal_read_bucket() bcache: shrink btree node cache after bch_btree_check() bcache: remove retry_flush_write from struct cache_set bcache: performance improvement for btree_flush_write() bcache: add reclaimed_journal_buckets to struct cache_set bcache: fix static checker warning in bcache_device_free() bcache: add more accurate error messages in read_super() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: add code comments in bch_btree_leaf_dirty() bcache: add idle_max_writeback_rate sysfs interface bcache: at least try to shrink 1 node in bch_mca_scan() Dan Carpenter (1): bcache: Fix an error code in bch_dump_read() Dongbo Cao (3): bcache: remove useless parameter of bch_debug_init() bcache: split combined if-condition code into separate ones bcache: panic fix for making cache device Geliang Tang (1): bcache: use kmemdup_nul for CACHED_LABEL buffer George Spelvin (1): bcache: Clean up bch_get_congested() Guoju Fang (4): bcache: print number of keys in trace_bcache_journal_write bcache: fix crashes stopping bcache device before read miss done bcache: fix inaccurate result of unused buckets bcache: fix a lost wake-up problem caused by mca_cannibalize_lock Jens Axboe (1): bcache: make is_discard_enabled() static Ming Lei (1): bcache: avoid to use bio_for_each_segment_all() in bch_bio_alloc_pages() Shenghui Wang (7): bcache: remove unused bch_passthrough_cache bcache: use MAX_CACHES_PER_SET instead of magic number 8 in __bch_bucket_alloc_set bcache: add comment for cache_set->fill_iter bcache: update comment for bch_data_insert bcache: update comment in sysfs.c bcache: cannot set writeback_running via sysfs if no writeback kthread created bcache: fix wrong usage use-after-freed on keylist in out_nocoalesce branch of btree_gc_coalesce Shile Zhang (1): bcache: add cond_resched() in __bch_cache_cmp() Wei Yongjun (1): bcache: fix possible memory leak in bch_cached_dev_run() drivers/md/bcache/Makefile | 2 - drivers/md/bcache/alloc.c | 7 +- drivers/md/bcache/bcache.h | 30 ++- drivers/md/bcache/bset.c | 78 ++----- drivers/md/bcache/btree.c | 30 ++- drivers/md/bcache/btree.h | 18 ++ drivers/md/bcache/closure.c | 7 - drivers/md/bcache/closure.h | 3 +- drivers/md/bcache/debug.c | 7 +- drivers/md/bcache/journal.c | 121 ++++++++--- drivers/md/bcache/journal.h | 4 + drivers/md/bcache/request.c | 59 ++--- drivers/md/bcache/request.h | 4 +- drivers/md/bcache/stats.c | 2 +- drivers/md/bcache/super.c | 486 +++++++++++++++++++++++++++++++++++------- drivers/md/bcache/sysfs.c | 166 +++++++++++---- drivers/md/bcache/sysfs.h | 10 + drivers/md/bcache/util.c | 6 +- drivers/md/bcache/util.h | 26 ++- drivers/md/bcache/writeback.c | 34 +++ drivers/md/bcache/writeback.h | 12 +- include/trace/events/bcache.h | 27 ++- 22 files changed, 861 insertions(+), 278 deletions(-) -- 2.16.4

2 76

[PATCH 42/75] bcache: avoid flushing btree node in cache_set_flush() if io disabled
by Coly Li 08 Jan '20

08 Jan '20

mainline inclusion from mainline-5.3-rc1 commit e6dcbd3e6c91b7828cb305ec324eb7fd9bdea8a0 category: backport When cache_set_flush() is called for too many I/O errors detected on cache device and the cache set is retiring, inside the function it doesn't make sense to flushing cached btree nodes from c->btree_cache because CACHE_SET_IO_DISABLE is set on c->flags already and all I/Os onto cache device will be rejected. This patch checks in cache_set_flush() that whether CACHE_SET_IO_DISABLE is set. If yes, then avoids to flush the cached btree nodes to reduce more time and make cache set retiring more faster. Signed-off-by: Coly Li <colyli(a)suse.de> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> --- drivers/md/bcache/super.c | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index e5b29aa7e18a..4b7c5567576b 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -1551,13 +1551,17 @@ static void cache_set_flush(struct closure *cl) if (!IS_ERR_OR_NULL(c->root)) list_add(&c->root->list, &c->btree_cache); - /* Should skip this if we're unregistering because of an error */ - list_for_each_entry(b, &c->btree_cache, list) { - mutex_lock(&b->write_lock); - if (btree_node_dirty(b)) - __bch_btree_node_write(b, NULL); - mutex_unlock(&b->write_lock); - } + /* + * Avoid flushing cached nodes if cache set is retiring + * due to too many I/O errors detected. + */ + if (!test_bit(CACHE_SET_IO_DISABLE, &c->flags)) + list_for_each_entry(b, &c->btree_cache, list) { + mutex_lock(&b->write_lock); + if (btree_node_dirty(b)) + __bch_btree_node_write(b, NULL); + mutex_unlock(&b->write_lock); + } for_each_cache(ca, c, i) if (ca->alloc_thread) -- 2.16.4

1 0

[RESEND PATCH 00/75] bcache backport for openEuler-1.0 upto 20200104
by Coly Li 08 Jan '20

08 Jan '20

Hi openEler kernel maintainer, This is the bcache backport since Linux v4.19 to v5.5 for openEuler-10 kernel. All the patches are based on openEuler-1.0 commit cf975ca6a64a ("Document: add guideline to submitting patches to openEuler"). This patch set survives for 2+ hours smoking test on a 48x2 cores Taishan machine. Pleasse review and consider to pick them. Thanks in advance. Coly Li --- Andrea Righi (1): bcache: fix deadlock in bcache_allocator Christoph Hellwig (2): bcache: remove the extra cflags for request.o bcache: don't export symbols Colin Ian King (1): bcache: fix indentation issue, remove tabs on a hunk of code Coly Li (50): bcache: fix typo in code comments of closure_return_with_destructor() bcache: introduce force_wake_up_gc() bcache: option to automatically run gc thread after writeback bcache: add MODULE_DESCRIPTION information bcache: make cutoff_writeback and cutoff_writeback_sync tunable bcache: set writeback_percent in a flexible range bcache: not use hard coded memset size in bch_cache_accounting_clear() bcache: export backing_dev_name via sysfs bcache: export backing_dev_uuid via sysfs bcache: fix input integer overflow of congested threshold bcache: add sysfs_strtoul_bool() for setting bit-field variables bcache: use sysfs_strtoul_bool() to set bit-field variables bcache: fix input overflow to writeback_delay bcache: fix input overflow to journal_delay_ms bcache: fix input overflow to cache set io_error_limit bcache: move definition of 'int ret' out of macro read_bucket() bcache: add comments for kobj release callback routine bcache: add error check for calling register_bdev() bcache: Add comments for blkdev_put() in registration code path bcache: add comments for closure_fn to be called in closure_queue() bcache: improve bcache_reboot() bcache: don't set max writeback rate if gc is running bcache: fix return value error in bch_journal_read() bcache: avoid flushing btree node in cache_set_flush() if io disabled bcache: add io error counting in write_bdev_super_endio() bcache: remove unnecessary prefetch() in bset_search_tree() bcache: add return value check to bch_cached_dev_run() bcache: remove unncessary code in bch_btree_keys_init() bcache: more detailed error message to bcache_device_link() bcache: add more error message in bch_cached_dev_attach() bcache: improve error message in bch_cached_dev_run() bcache: remove "XXX:" comment line from run_cache_set() bcache: make bset_search_tree() be more understandable bcache: add pendings_cleanup to stop pending bcache device bcache: stop writeback kthread and kworker when bch_cached_dev_run() failed bcache: avoid a deadlock in bcache_reboot() bcache: acquire bch_register_lock later in cached_dev_detach_finish() bcache: add code comments for journal_read_bucket() bcache: set largest seq to ja->seq[bucket_index] in journal_read_bucket() bcache: shrink btree node cache after bch_btree_check() bcache: remove retry_flush_write from struct cache_set bcache: performance improvement for btree_flush_write() bcache: add reclaimed_journal_buckets to struct cache_set bcache: fix static checker warning in bcache_device_free() bcache: add more accurate error messages in read_super() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: add code comments in bch_btree_leaf_dirty() bcache: add idle_max_writeback_rate sysfs interface bcache: at least try to shrink 1 node in bch_mca_scan() Dan Carpenter (1): bcache: Fix an error code in bch_dump_read() Dongbo Cao (3): bcache: remove useless parameter of bch_debug_init() bcache: split combined if-condition code into separate ones bcache: panic fix for making cache device Geliang Tang (1): bcache: use kmemdup_nul for CACHED_LABEL buffer George Spelvin (1): bcache: Clean up bch_get_congested() Guoju Fang (4): bcache: print number of keys in trace_bcache_journal_write bcache: fix crashes stopping bcache device before read miss done bcache: fix inaccurate result of unused buckets bcache: fix a lost wake-up problem caused by mca_cannibalize_lock Jens Axboe (1): bcache: make is_discard_enabled() static Ming Lei (1): bcache: avoid to use bio_for_each_segment_all() in bch_bio_alloc_pages() Shenghui Wang (7): bcache: remove unused bch_passthrough_cache bcache: use MAX_CACHES_PER_SET instead of magic number 8 in __bch_bucket_alloc_set bcache: add comment for cache_set->fill_iter bcache: update comment for bch_data_insert bcache: update comment in sysfs.c bcache: cannot set writeback_running via sysfs if no writeback kthread created bcache: fix wrong usage use-after-freed on keylist in out_nocoalesce branch of btree_gc_coalesce Shile Zhang (1): bcache: add cond_resched() in __bch_cache_cmp() Wei Yongjun (1): bcache: fix possible memory leak in bch_cached_dev_run() drivers/md/bcache/Makefile | 2 - drivers/md/bcache/alloc.c | 7 +- drivers/md/bcache/bcache.h | 30 ++- drivers/md/bcache/bset.c | 78 ++----- drivers/md/bcache/btree.c | 30 ++- drivers/md/bcache/btree.h | 18 ++ drivers/md/bcache/closure.c | 7 - drivers/md/bcache/closure.h | 3 +- drivers/md/bcache/debug.c | 7 +- drivers/md/bcache/journal.c | 121 ++++++++--- drivers/md/bcache/journal.h | 4 + drivers/md/bcache/request.c | 59 ++--- drivers/md/bcache/request.h | 4 +- drivers/md/bcache/stats.c | 2 +- drivers/md/bcache/super.c | 486 +++++++++++++++++++++++++++++++++++------- drivers/md/bcache/sysfs.c | 166 +++++++++++---- drivers/md/bcache/sysfs.h | 10 + drivers/md/bcache/util.c | 6 +- drivers/md/bcache/util.h | 26 ++- drivers/md/bcache/writeback.c | 34 +++ drivers/md/bcache/writeback.h | 12 +- include/trace/events/bcache.h | 27 ++- 22 files changed, 861 insertions(+), 278 deletions(-) -- 2.16.4

1 74

[RESEND PATCH 00/75] bcache backport for openEuler-1.0 upto 20200104
by Coly Li 08 Jan '20

08 Jan '20

Hi openEler kernel maintainer, This is the bcache backport since Linux v4.19 to v5.5 for openEuler-10 kernel. All the patches are based on openEuler-1.0 commit cf975ca6a64a ("Document: add guideline to submitting patches to openEuler"). This patch set survives for 2+ hours smoking test on a 48x2 cores Taishan machine. Pleasse review and consider to pick them. Thanks in advance. Coly Li --- Andrea Righi (1): bcache: fix deadlock in bcache_allocator Christoph Hellwig (2): bcache: remove the extra cflags for request.o bcache: don't export symbols Colin Ian King (1): bcache: fix indentation issue, remove tabs on a hunk of code Coly Li (50): bcache: fix typo in code comments of closure_return_with_destructor() bcache: introduce force_wake_up_gc() bcache: option to automatically run gc thread after writeback bcache: add MODULE_DESCRIPTION information bcache: make cutoff_writeback and cutoff_writeback_sync tunable bcache: set writeback_percent in a flexible range bcache: not use hard coded memset size in bch_cache_accounting_clear() bcache: export backing_dev_name via sysfs bcache: export backing_dev_uuid via sysfs bcache: fix input integer overflow of congested threshold bcache: add sysfs_strtoul_bool() for setting bit-field variables bcache: use sysfs_strtoul_bool() to set bit-field variables bcache: fix input overflow to writeback_delay bcache: fix input overflow to journal_delay_ms bcache: fix input overflow to cache set io_error_limit bcache: move definition of 'int ret' out of macro read_bucket() bcache: add comments for kobj release callback routine bcache: add error check for calling register_bdev() bcache: Add comments for blkdev_put() in registration code path bcache: add comments for closure_fn to be called in closure_queue() bcache: improve bcache_reboot() bcache: don't set max writeback rate if gc is running bcache: fix return value error in bch_journal_read() bcache: avoid flushing btree node in cache_set_flush() if io disabled bcache: add io error counting in write_bdev_super_endio() bcache: remove unnecessary prefetch() in bset_search_tree() bcache: add return value check to bch_cached_dev_run() bcache: remove unncessary code in bch_btree_keys_init() bcache: more detailed error message to bcache_device_link() bcache: add more error message in bch_cached_dev_attach() bcache: improve error message in bch_cached_dev_run() bcache: remove "XXX:" comment line from run_cache_set() bcache: make bset_search_tree() be more understandable bcache: add pendings_cleanup to stop pending bcache device bcache: stop writeback kthread and kworker when bch_cached_dev_run() failed bcache: avoid a deadlock in bcache_reboot() bcache: acquire bch_register_lock later in cached_dev_detach_finish() bcache: add code comments for journal_read_bucket() bcache: set largest seq to ja->seq[bucket_index] in journal_read_bucket() bcache: shrink btree node cache after bch_btree_check() bcache: remove retry_flush_write from struct cache_set bcache: performance improvement for btree_flush_write() bcache: add reclaimed_journal_buckets to struct cache_set bcache: fix static checker warning in bcache_device_free() bcache: add more accurate error messages in read_super() bcache: deleted code comments for dead code in bch_data_insert_keys() bcache: add code comment bch_keylist_pop() and bch_keylist_pop_front() bcache: add code comments in bch_btree_leaf_dirty() bcache: add idle_max_writeback_rate sysfs interface bcache: at least try to shrink 1 node in bch_mca_scan() Dan Carpenter (1): bcache: Fix an error code in bch_dump_read() Dongbo Cao (3): bcache: remove useless parameter of bch_debug_init() bcache: split combined if-condition code into separate ones bcache: panic fix for making cache device Geliang Tang (1): bcache: use kmemdup_nul for CACHED_LABEL buffer George Spelvin (1): bcache: Clean up bch_get_congested() Guoju Fang (4): bcache: print number of keys in trace_bcache_journal_write bcache: fix crashes stopping bcache device before read miss done bcache: fix inaccurate result of unused buckets bcache: fix a lost wake-up problem caused by mca_cannibalize_lock Jens Axboe (1): bcache: make is_discard_enabled() static Ming Lei (1): bcache: avoid to use bio_for_each_segment_all() in bch_bio_alloc_pages() Shenghui Wang (7): bcache: remove unused bch_passthrough_cache bcache: use MAX_CACHES_PER_SET instead of magic number 8 in __bch_bucket_alloc_set bcache: add comment for cache_set->fill_iter bcache: update comment for bch_data_insert bcache: update comment in sysfs.c bcache: cannot set writeback_running via sysfs if no writeback kthread created bcache: fix wrong usage use-after-freed on keylist in out_nocoalesce branch of btree_gc_coalesce Shile Zhang (1): bcache: add cond_resched() in __bch_cache_cmp() Wei Yongjun (1): bcache: fix possible memory leak in bch_cached_dev_run() drivers/md/bcache/Makefile | 2 - drivers/md/bcache/alloc.c | 7 +- drivers/md/bcache/bcache.h | 30 ++- drivers/md/bcache/bset.c | 78 ++----- drivers/md/bcache/btree.c | 30 ++- drivers/md/bcache/btree.h | 18 ++ drivers/md/bcache/closure.c | 7 - drivers/md/bcache/closure.h | 3 +- drivers/md/bcache/debug.c | 7 +- drivers/md/bcache/journal.c | 121 ++++++++--- drivers/md/bcache/journal.h | 4 + drivers/md/bcache/request.c | 59 ++--- drivers/md/bcache/request.h | 4 +- drivers/md/bcache/stats.c | 2 +- drivers/md/bcache/super.c | 486 +++++++++++++++++++++++++++++++++++------- drivers/md/bcache/sysfs.c | 166 +++++++++++---- drivers/md/bcache/sysfs.h | 10 + drivers/md/bcache/util.c | 6 +- drivers/md/bcache/util.h | 26 ++- drivers/md/bcache/writeback.c | 34 +++ drivers/md/bcache/writeback.h | 12 +- include/trace/events/bcache.h | 27 ++- 22 files changed, 861 insertions(+), 278 deletions(-) -- 2.16.4

1 1

[Discussion] How to manage new projects in openEuler community
by Liyongle (Fred) 06 Jan '20

06 Jan '20

Hi all, If you are interested in managing new projects, or you are willing to create new projects in our community, you may be interested in the discussion [1]. Join to show your opinion. You opinion matters. [1] https://gitee.com/openeuler/community/issues/I17WWY?from=project-issue Fred 李永乐

1 0

Proposed to imporve your repos/projects readability
by Liyongle (Fred) 06 Jan '20

06 Jan '20

Hi all, At this early stage, many developers are coming to see the projects. To make visitors easier to understand the project, it is proposed to improve the following: - README It is better to provide both English[1] and Chinese[2]. - Meeting schedule Please provide meeting schedule and add the information to your readme. The example is [3]. - Contact Mail and IRC. - Team members Please be sure to including Maintainers, committers and contributors. This is a way to respect every contributor, and let new contributors to understand who to talk. - How to contribute Different projects have their own way to contribute. Some projects (like community) are mainly documents, some are codes and some are buildings. Please provide the contribution guidance for your own projects. - Other useful information Your advice and good practice are valuable. [1] https://gitee.com/openeuler/community/blob/master/README.md [2] https://gitee.com/openeuler/community/blob/master/README_cn.md [3] https://gitee.com/openeuler/community/blob/master/README.md#meeting Fred 李永乐

1 0

RE: [Dev] 如何向openEuler-1.0内核提交后向移植的补丁？
by Liyongle (Fred) 05 Jan '20

05 Jan '20

If you are committing patches for kernel, please send email to kernel(a)openeuler.org like in Kernel community. If for others, please find the project, or if you couldn't find it, follow [1] to create a new SIG for the project. [1] https://gitee.com/openeuler/community/blob/master/zh/technical-committee/go… Fred 李永乐 -----Original Message----- From: Coly Li via Dev [mailto:dev@openeuler.org] Sent: Saturday, January 4, 2020 22:44 To: dev(a)openeuler.org Subject: [Dev] 如何向openEuler-1.0内核提交后向移植的补丁？嗨，我今天按照openEuler-1.0内核里的指引，将bcache从Linux v5.5到v4.19里所有 openEuler内核缺失的补丁都做了后向移植，并在泰山服务器上做了简单的冒烟测试。请问这些补丁如何提交呢？是向dev(a)openeuler.xn--org(-3h5fs2ba998ajsdk5fk10bgbn7g3dgcvcw6zaga 内核开发那样），还是在gitee网站上发pull request（像github那样）。多谢！ -- Coly Li _______________________________________________ Dev mailing list -- dev(a)openeuler.org To unsubscribe send an email to dev-leave(a)openeuler.org

1 0

[PATCH 00/20] Fixes some bugs in drivers and kernel
by Yang Yingliang 03 Jan '20

03 Jan '20

This patchset fixes several bugs in drivers and kernel. Also backport serveral CVE fixes from mainline. Eric Dumazet (1): net: silence KCSAN warnings around sk_add_backlog() calls Ganapathi Bhat (1): mwifiex: fix possible heap overflow in mwifiex_process_country_ie() Gao Chuan (1): hisi_sas: Solve the bug of hisi sas tried to access other's interrupt. Hongbo Yao (1): Revert "vfio: relieve mmap_sem reader cacheline bouncing by holding it longer" Junxin Chen (2): net: hns3: fix bug when config of HNS3 is y net: hns3: fix bugs found by codereview Liu Yanshi (1): pcie: hisi pcie add saftly check Mike Christie (1): nbd: fix shutdown and recv work deadlock v2 Shaozhengchao (1): net/hinic: rectify issue Wei Li (1): sched/debug: Reset watchdog on all CPUs while processing sysrq-t Xiongfeng Wang (1): PCI: fix the wrong class type for HiSilicon NP 5896 device YueHaibing (1): dccp: Fix memleak in __feat_register_sp Zhang Wei (1): acc: fixup security problem and modify reset process fengsheng (2): drivers : localbus fixup some parameter dont check the legitimacy drivers : sysctl fixup some parameter dont check the legitimacy wanglin (2): RDMA/hns: Optimize roce code by review advice RDMA/hns: modify roce dfx code by review advice yangerkun (1): ext4: stop IO for page without buffer_head Zhang Wei (1): fixup sec2 free c_key but not cleanup it zhangwei (1): hpre: fixup security check review problem drivers/block/nbd.c | 6 +- drivers/crypto/hisilicon/hpre/hpre_crypto.c | 22 +- drivers/crypto/hisilicon/hpre/hpre_main.c | 157 ++++++----- drivers/crypto/hisilicon/qm.c | 205 +++++++++++++-- drivers/crypto/hisilicon/qm.h | 23 +- drivers/crypto/hisilicon/rde/rde.h | 25 +- drivers/crypto/hisilicon/rde/rde_api.c | 244 +++++++++--------- drivers/crypto/hisilicon/rde/rde_api.h | 2 +- drivers/crypto/hisilicon/rde/rde_data.c | 28 +- drivers/crypto/hisilicon/rde/rde_main.c | 183 +++++++------ drivers/crypto/hisilicon/sec/sec_algs.c | 13 +- drivers/crypto/hisilicon/sec2/sec.h | 10 +- drivers/crypto/hisilicon/sec2/sec_crypto.c | 43 +-- drivers/crypto/hisilicon/sec2/sec_crypto.h | 10 +- drivers/crypto/hisilicon/sec2/sec_main.c | 244 ++++++++++-------- drivers/crypto/hisilicon/sec2/sec_usr_if.h | 10 +- drivers/crypto/hisilicon/sgl.c | 6 +- drivers/crypto/hisilicon/zip/zip_crypto.c | 4 +- drivers/crypto/hisilicon/zip/zip_main.c | 190 +++++++++----- .../infiniband/hw/hns/hns_roce_hw_sysfs_v2.c | 6 +- .../hw/hns/roce-customer/rdfx_entry.c | 24 +- .../hw/hns/roce-customer/rdfx_hw_v2.c | 58 +---- .../hw/hns/roce-customer/rdfx_main.c | 2 + .../hw/hns/roce-customer/rdfx_sysfs.c | 96 +------ drivers/net/ethernet/hisilicon/hns3/hnae3.h | 2 +- .../hns3/hns-customer/hns3_enet_it.c | 2 +- .../hns3/hns-customer/hns3pf/hclge_ext.c | 12 +- .../hisilicon/hns3/hns3_cae/hns3_cae_cmd.c | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_fd.c | 2 +- .../hisilicon/hns3/hns3_cae/hns3_cae_init.c | 13 +- .../hisilicon/hns3/hns3_cae/hns3_cae_pkt.c | 39 ++- .../hisilicon/hns3/hns3_cae/hns3_cae_pkt.h | 3 + .../hisilicon/hns3/hns3_cae/hns3_cae_qinfo.c | 2 +- .../hns3/hns3_cae/hns3_cae_version.c | 4 +- .../hns3/hns3_cae/hns3_cae_version.h | 2 +- .../net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- .../hisilicon/hns3/hns3pf/hclge_main.h | 2 +- .../hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- drivers/net/ethernet/huawei/hinic/hinic_tx.c | 2 +- .../net/wireless/marvell/mwifiex/sta_ioctl.c | 13 +- .../hisi-pcie-customer/hisi_pcie_cae.c | 108 +++++++- drivers/pci/quirks.c | 2 +- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +- drivers/soc/hisilicon/lbc/hs_lbc_pltfm.c | 12 +- drivers/soc/hisilicon/sysctl/sysctl_drv.c | 4 +- drivers/soc/hisilicon/sysctl/sysctl_pmbus.c | 47 +++- drivers/vfio/vfio_iommu_type1.c | 28 +- fs/ext4/inode.c | 26 ++ kernel/sched/debug.c | 11 +- net/core/sock.c | 2 +- net/dccp/feat.c | 7 +- net/ipv4/tcp_ipv4.c | 2 +- net/llc/llc_conn.c | 2 +- net/sctp/input.c | 4 +- net/tipc/socket.c | 6 +- net/x25/x25_dev.c | 2 +- 56 files changed, 1152 insertions(+), 828 deletions(-) -- 2.20.1

1 20

[infrastructure]What kind of blog system do you need in openEuler community?
by Liyongle (Fred) 03 Jan '20

03 Jan '20

Hi all, We are considering to build a blog in openEuler. Please leave your opinion in [1]. Your opinion matters. [1] https://gitee.com/openeuler/community-issue/issues/I17NN3 Fred 李永乐

1 0

[discussion] What code of conduct should we follow?
by Liyongle (Fred) 03 Jan '20

03 Jan '20

Hi all, Is openEuler a serious open source project? A very good question! Let’s try to figure out the code of conduct for our projects. You are welcome to provide your suggestion in [1]. [1] https://gitee.com/openeuler/community-issue/issues/I17R49?from=project-issue Fred 李永乐

1 0

openEuler is launched now
by Liyongle (Fred) 01 Jan '20

01 Jan '20

Dear openEuler members, I am excited to announce that openEuler is open now and you can access, read and play now. Thanks to all the OS developers, infrastructure team and friends who cares about openEuler, contributes in openEuler. It is just a start, and let’s continue collaborating to make openEuler better. The following links may help you to get a glance to openEuler community. Website: https://openeuler.org/ You can find two organizations on gitee.com Code sources: https://gitee.com/openeuler/ Package sources: https://gitee.com/src-openeuler/ To download ISO, visit https://openeuler.obs.cn-south-1.myhuaweicloud.com/release/openEuler-1.0-aa… To know how to start contributing, visit https://openeuler.org/en/developer.html Find all the SIGs: https://openeuler.org/en/sig.html To apply for a new SIG: https://gitee.com/openeuler/community/blob/master/en/technical-committee/go… or https://gitee.com/openeuler/community/blob/master/zh/technical-committee/go… in Chinese. To know technical Committee, visit https://gitee.com/openeuler/community/tree/master/zh/technical-committee. Happy New Year and wish you all have a happy 2020! Fred 李永乐

2 1