- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 v10 0/6] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 12 Jan '24

12 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP; 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. v7->v8: 1) Add detection of mounting part0 while partitions write opened; 2) Add detection of writing partitions while part0 mounted; 3) Add config in openeuler_defconfig. v8->v9: 1) Split bd_mounters into bd_mounted and part_mounters; 2) Add part_writers; 3) Count part_writers and part_mounters regardless of whether BLK_DEV_DETECT_WRITING_PART0 is set. v9->v10: 1) Split the logic of detecting writing lower device from bd_may_open(); 2) Fix the bug of initializing bdev_allow_write_mounted. Li Lingfeng (6): block: Record writing and mounting regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted add config about writing mounted devices in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + block/Kconfig | 17 ++++ block/bdev.c | 123 +++++++++++++++++++++---- include/linux/blk_types.h | 3 + include/linux/blkdev.h | 2 + 6 files changed, 133 insertions(+), 18 deletions(-) -- 2.31.1

2 7

[PATCH OLK-6.6 00/12] Support feature pv-qspinlock pv-sched
by lishusen 12 Jan '24

12 Jan '24

Support feature pv-qspinlock pv-sched Zengruan Ye (10): KVM: arm64: Document PV-sched interface KVM: arm64: Implement PV_SCHED_FEATURES call KVM: arm64: Support pvsched preempted via shared structure KVM: arm64: Add interface to support vCPU preempted check KVM: arm64: Support the vCPU preemption check KVM: arm64: Add SMCCC PV-sched to kick cpu KVM: arm64: Implement PV_SCHED_KICK_CPU call KVM: arm64: Add interface to support PV qspinlock KVM: arm64: Enable PV qspinlock KVM: arm64: Add tracepoints for PV qspinlock lishusen (1): KVM: arm64: Replace pv.ops by static_call for PV qspinlock feature yezengruan (1): kvm: arm64: fix some pvsched bugs Documentation/virt/kvm/arm/pvsched.rst | 74 ++++++++ arch/arm64/Kconfig | 13 ++ arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/kvm_host.h | 20 +++ arch/arm64/include/asm/paravirt.h | 49 ++++++ arch/arm64/include/asm/pvsched-abi.h | 16 ++ arch/arm64/include/asm/qspinlock.h | 48 +++++ arch/arm64/include/asm/qspinlock_paravirt.h | 12 ++ arch/arm64/include/asm/spinlock.h | 13 ++ arch/arm64/kernel/Makefile | 3 +- arch/arm64/kernel/paravirt-spinlocks.c | 21 +++ arch/arm64/kernel/paravirt.c | 185 ++++++++++++++++++++ arch/arm64/kernel/trace-paravirt.h | 66 +++++++ arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 15 +- arch/arm64/kvm/handle_exit.c | 1 + arch/arm64/kvm/hypercalls.c | 20 +++ arch/arm64/kvm/pvsched.c | 79 +++++++++ arch/arm64/kvm/trace_arm.h | 18 ++ include/linux/arm-smccc.h | 25 +++ include/linux/cpuhotplug.h | 1 + 21 files changed, 678 insertions(+), 4 deletions(-) create mode 100644 Documentation/virt/kvm/arm/pvsched.rst create mode 100644 arch/arm64/include/asm/pvsched-abi.h create mode 100644 arch/arm64/include/asm/qspinlock.h create mode 100644 arch/arm64/include/asm/qspinlock_paravirt.h create mode 100644 arch/arm64/kernel/paravirt-spinlocks.c create mode 100644 arch/arm64/kernel/trace-paravirt.h create mode 100644 arch/arm64/kvm/pvsched.c -- 2.33.0

2 13

[PATCH OLK-5.10] drm/amdgpu: correct the amdgpu runtime dereference usage count
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Prike Liang <Prike.Liang(a)amd.com> stable inclusion from stable-v5.10.205 commit d4fb20dcc13b37ee4f02025cd1dc8054d6027721 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ] Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang(a)amd.com> Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7cc7af2a6822..3671a700189d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -299,13 +299,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set, adev->have_disp_power_ref = true; return ret; } - /* if we have no active crtcs, then drop the power ref - we got before */ - if (!active && adev->have_disp_power_ref) { - pm_runtime_put_autosuspend(dev->dev); + /* if we have no active crtcs, then go to + * drop the power ref we got before + */ + if (!active && adev->have_disp_power_ref) adev->have_disp_power_ref = false; - } - out: /* drop the power reference we got coming in here */ pm_runtime_put_autosuspend(dev->dev); -- 2.33.0

1 0

[PATCH OLK-5.10] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Lukasz Majczak <lma(a)semihalf.com> stable inclusion from stable-v5.10.205 commit 31c31a78dccfc6ad15af1f6e55ce8cfbb3d31fa5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 3d887d512494d678b17c57b835c32f4e48d34f26 ] As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable(a)vger.kernel.org> # 4.14+ Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> Reviewed-by: Radoslaw Biernacki <rad(a)chromium.org> Signed-off-by: Manasi Navare <navaremanasi(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@se… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index b5e15933cb5f..27305f339881 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2612,14 +2612,14 @@ static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper( struct drm_dp_mst_branch *found_mstb; struct drm_dp_mst_port *port; + if (!mstb) + return NULL; + if (memcmp(mstb->guid, guid, 16) == 0) return mstb; list_for_each_entry(port, &mstb->ports, next) { - if (!port->mstb) - continue; - found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid); if (found_mstb) -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: correct chunk_ptr to a pointer to chunk.
by Dapeng Yu 12 Jan '24

12 Jan '24

From: YuanShang <YuanShang.Mao(a)amd.com> stable inclusion from stable-v5.10.205 commit 13b1fa5407949fb7ada3d2362c5099e18b2a25c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ] The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <YuanShang.Mao(a)amd.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index ffd8f5601e28..9e5eae1207e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -153,7 +153,7 @@ static int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, union drm_amdgpu_cs } for (i = 0; i < p->nchunks; i++) { - struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL; + struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL; struct drm_amdgpu_cs_chunk user_chunk; uint32_t __user *cdata; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Qu Huang <qu.huang(a)linux.dev> stable inclusion from stable-v5.10.205 commit f475d5502f33a6c5b149b0afe96316ad1962a64a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 5104fdf50d326db2c1a994f8b35dcd46e63ae4ad ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <qu.huang(a)linux.dev> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 00a190929b55..48df32dd352e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -575,6 +575,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf, ssize_t result = 0; int r; + if (!adev->smc_rreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; @@ -634,6 +637,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user * ssize_t result = 0; int r; + if (!adev->smc_wreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_pool: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_hugetlb: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6] kabi: mm: add kabi reserve for mm structure
by Kefeng Wang 12 Jan '24

12 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UU53 --------------------------- Reserve space for the structure in mm subsystem. Signed-off-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> --- include/linux/mempolicy.h | 3 +++ include/linux/mempool.h | 4 ++++ include/linux/memremap.h | 9 +++++++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 11 +++++++++++ include/linux/mmzone.h | 14 ++++++++++++++ include/linux/pagemap.h | 4 ++++ include/linux/shrinker.h | 7 +++++++ include/linux/swap.h | 3 +++ 9 files changed, 63 insertions(+) diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index ca62e945e4f7..2e81ac87e6f6 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -52,6 +52,9 @@ struct mempolicy { nodemask_t cpuset_mems_allowed; /* relative to these nodes */ nodemask_t user_nodemask; /* nodemask passed by user */ } w; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) }; /* diff --git a/include/linux/mempool.h b/include/linux/mempool.h index 4aae6c06c5f2..178959b2ee5c 100644 --- a/include/linux/mempool.h +++ b/include/linux/mempool.h @@ -7,6 +7,7 @@ #include <linux/wait.h> #include <linux/compiler.h> +#include <linux/kabi.h> struct kmem_cache; @@ -23,6 +24,9 @@ typedef struct mempool_s { mempool_alloc_t *alloc; mempool_free_t *free; wait_queue_head_t wait; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) } mempool_t; static inline bool mempool_initialized(mempool_t *pool) diff --git a/include/linux/memremap.h b/include/linux/memremap.h index 1314d9c5f05b..816532f7ae92 100644 --- a/include/linux/memremap.h +++ b/include/linux/memremap.h @@ -25,6 +25,8 @@ struct vmem_altmap { unsigned long free; unsigned long align; unsigned long alloc; + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* @@ -99,6 +101,8 @@ struct dev_pagemap_ops { */ int (*memory_failure)(struct dev_pagemap *pgmap, unsigned long pfn, unsigned long nr_pages, int mf_flags); + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define PGMAP_ALTMAP_VALID (1 << 0) @@ -133,6 +137,11 @@ struct dev_pagemap { const struct dev_pagemap_ops *ops; void *owner; int nr_range; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) union { struct range range; DECLARE_FLEX_ARRAY(struct range, ranges); diff --git a/include/linux/mm.h b/include/linux/mm.h index f078aa6b493c..ffd323dda7cf 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -30,6 +30,7 @@ #include <linux/kasan.h> #include <linux/memremap.h> #include <linux/slab.h> +#include <linux/kabi.h> struct mempolicy; struct anon_vma; @@ -562,6 +563,9 @@ struct vm_fault { * page table to avoid allocation from * atomic context. */ + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) }; /* @@ -641,6 +645,10 @@ struct vm_operations_struct { */ struct page *(*find_special_page)(struct vm_area_struct *vma, unsigned long addr); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #ifdef CONFIG_NUMA_BALANCING diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 0bc3c7c191a5..03a0a3e53986 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -22,6 +22,8 @@ #include <asm/mmu.h> +#include <linux/kabi.h> + #ifndef AT_VECTOR_SIZE_ARCH #define AT_VECTOR_SIZE_ARCH 0 #endif @@ -677,6 +679,10 @@ struct vm_area_struct { #ifdef CONFIG_SHARE_POOL struct sp_area *spa; #endif + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) } __randomize_layout; #ifdef CONFIG_SCHED_MM_CID @@ -939,6 +945,11 @@ struct mm_struct { #endif } __randomize_layout; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) /* * The mm_cpumask needs to be at the end of mm_struct, because it * is dynamically sized based on nr_cpu_ids. diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index 57086c57b8e4..0821282fccd3 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -637,6 +637,10 @@ struct lruvec { #ifdef CONFIG_MEMCG struct pglist_data *pgdat; #endif + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* Isolate unmapped pages */ @@ -997,6 +1001,12 @@ struct zone { bool contiguous; CACHELINE_PADDING(_pad3_); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* Zone statistics */ atomic_long_t vm_stat[NR_VM_ZONE_STAT_ITEMS]; atomic_long_t vm_numa_event[NR_VM_NUMA_EVENT_ITEMS]; @@ -1410,6 +1420,10 @@ typedef struct pglist_data { CACHELINE_PADDING(_pad2_); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + /* Per-node vmstats */ struct per_cpu_nodestat __percpu *per_cpu_nodestats; atomic_long_t vm_stat[NR_VM_NODE_STAT_ITEMS]; diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 8c9608b217b0..d418f1c563ee 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -15,6 +15,7 @@ #include <linux/bitops.h> #include <linux/hardirq.h> /* for in_interrupt() */ #include <linux/hugetlb_inline.h> +#include <linux/kabi.h> struct folio_batch; @@ -1262,6 +1263,9 @@ struct readahead_control { struct file *file; struct address_space *mapping; struct file_ra_state *ra; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) /* private: use the readahead_* accessors instead */ pgoff_t _index; unsigned int _nr_pages; diff --git a/include/linux/shrinker.h b/include/linux/shrinker.h index 224293b2dd06..335e7aa12fa5 100644 --- a/include/linux/shrinker.h +++ b/include/linux/shrinker.h @@ -4,6 +4,7 @@ #include <linux/atomic.h> #include <linux/types.h> +#include <linux/kabi.h> /* * This struct is used to pass information from page reclaim to the shrinkers. @@ -34,6 +35,9 @@ struct shrink_control { /* current memcg being shrunk (for memcg aware shrinkers) */ struct mem_cgroup *memcg; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define SHRINK_STOP (~0UL) @@ -83,6 +87,9 @@ struct shrinker { #endif /* objs pending delete, per node */ atomic_long_t *nr_deferred; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define DEFAULT_SEEKS 2 /* A good number if you don't know better. */ diff --git a/include/linux/swap.h b/include/linux/swap.h index 9dc160d6fd43..a0286656c231 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -334,6 +334,9 @@ struct swap_info_struct { */ struct work_struct discard_work; /* discard worker */ struct swap_cluster_list discard_clusters; /* discard clusters list */ + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) struct plist_node avail_lists[]; /* * entries in swap_avail_heads, one * entry per node. -- 2.27.0

2 1

[PATCH OLK-6.6 0/3] kabi reserve for gmem
by Wupeng Ma 12 Jan '24

12 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Reserve kabi in preparation for gmem. Ma Wupeng (3): mm: gmem: kabi reserve for gmem mm: gmem: Introduce new node state N_HETEROGENEOUS openeuler_defconfig: enable CONFIG_GMEM by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/base/node.c | 6 ++++++ include/linux/device.h | 4 ++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 5 +++++ include/linux/nodemask.h | 3 +++ mm/Kconfig | 14 ++++++++++++++ mm/page_alloc.c | 3 +++ 9 files changed, 45 insertions(+) -- 2.25.1

4 6

[PATCH OLK-6.6] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 12 Jan '24

12 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> mainline inclusion from mainline-v6.7-rc4 commit 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8VGWZ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Revert "drm/prime: Unexport helpers for fd/handle conversion" This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

2 1

[PATCH OLK-6.6 1/1] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 12 Jan '24

12 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> mainline inclusion from mainline-v6.7-rc4 commit 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8VGWZ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Revert "drm/prime: Unexport helpers for fd/handle conversion" This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

2 1

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 0/2] Export remaining aarch64 kvm exit reasons
by lishusen 12 Jan '24

12 Jan '24

Export remaining aarch64 kvm exit reasons to debugfs Zenghui Yu (1): KVM: arm64: Fix {fp_asimd,sve}_exit_stat manipulation chenjiajun (1): kvm: debugfs: export remaining aarch64 kvm exit reasons to debugfs C | 0 arch/arm64/include/asm/kvm_host.h | 15 +++++++++++++++ arch/arm64/kvm/handle_exit.c | 9 +++++++++ arch/arm64/kvm/hyp/include/hyp/switch.h | 2 ++ arch/arm64/kvm/mmu.c | 1 + arch/arm64/kvm/sys_regs.c | 11 +++++++++++ 6 files changed, 38 insertions(+) create mode 100644 C -- 2.33.0

2 3

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_hugetlb: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 225 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2595 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-5.10] drm/radeon: possible buffer overflow
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> stable inclusion from stable-v5.10.205 commit 7b063c93bece827fde237fae1c101bceeee4e896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit dd05484f99d16715a88eedfca363828ef9a4c2d4 ] Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1(a)huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 11e3e99a9f01..96dbf595254c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4819,14 +4819,15 @@ int evergreen_irq_process(struct radeon_device *rdev) break; case 44: /* hdmi */ afmt_idx = src_data; - if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) - DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); - if (afmt_idx > 5) { DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + + if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) + DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); + afmt_status[afmt_idx] &= ~AFMT_AZ_FORMAT_WTRIG; queue_hdmi = true; DRM_DEBUG("IH: HDMI%d\n", afmt_idx + 1); -- 2.33.0

2 1

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by Jia Qingtong 12 Jan '24

12 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ea6de9f6732d495c506f9c140b4ec17c957e1b77 -- 2.43.GIT

2 4

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by Jia Qingtong 12 Jan '24

12 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ea6de9f6732d495c506f9c140b4ec17c957e1b77 -- 2.43.GIT

2 4

[PATCH OLK-6.6 V5 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 11 Jan '24

11 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() openeuler_defconfig: enable CONFIG_BPF_SCHED arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 27 ++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 ++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 478 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 0/3] kabi reserve for gmem
by Wupeng Ma 11 Jan '24

11 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Reserve kabi in preparation for gmem. Ma Wupeng (3): mm: gmem: kabi reserve for gmem mm: gmem: Introduce new node state N_HETEROGENEOUS openeuler_defconfig: enable CONFIG_GMEM by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/base/node.c | 6 ++++++ include/linux/device.h | 4 ++++ include/linux/mm.h | 8 ++++++++ include/linux/mm_types.h | 5 +++++ include/linux/nodemask.h | 3 +++ mm/Kconfig | 14 ++++++++++++++ mm/page_alloc.c | 3 +++ 9 files changed, 45 insertions(+) -- 2.25.1

2 4

[PATCH OLK-6.6 00/11] Support feature pv-qspinlock and pv-sched
by lishusen 11 Jan '24

11 Jan '24

Support feature pv-qspinlock and pv-sched after pv.ops removed Zengruan Ye (10): KVM: arm64: Document PV-sched interface KVM: arm64: Implement PV_SCHED_FEATURES call KVM: arm64: Support pvsched preempted via shared structure KVM: arm64: Add interface to support vCPU preempted check KVM: arm64: Support the vCPU preemption check KVM: arm64: Add SMCCC PV-sched to kick cpu KVM: arm64: Implement PV_SCHED_KICK_CPU call KVM: arm64: Add interface to support PV qspinlock KVM: arm64: Enable PV qspinlock KVM: arm64: Add tracepoints for PV qspinlock lishusen (1): KVM: arm64: Replace pv.ops by static_call for PV qspinlock feature Documentation/virt/kvm/arm/pvsched.rst | 74 +++++++++ arch/arm64/Kconfig | 13 ++ arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/kvm_host.h | 20 +++ arch/arm64/include/asm/paravirt.h | 44 +++++ arch/arm64/include/asm/pvsched-abi.h | 16 ++ arch/arm64/include/asm/qspinlock.h | 48 ++++++ arch/arm64/include/asm/qspinlock_paravirt.h | 12 ++ arch/arm64/include/asm/spinlock.h | 13 ++ arch/arm64/kernel/Makefile | 3 +- arch/arm64/kernel/paravirt-spinlocks.c | 21 +++ arch/arm64/kernel/paravirt.c | 174 ++++++++++++++++++++ arch/arm64/kernel/setup.c | 2 + arch/arm64/kernel/trace-paravirt.h | 66 ++++++++ arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 13 +- arch/arm64/kvm/handle_exit.c | 1 + arch/arm64/kvm/hypercalls.c | 20 +++ arch/arm64/kvm/pvsched.c | 79 +++++++++ arch/arm64/kvm/trace_arm.h | 18 ++ include/linux/arm-smccc.h | 25 +++ include/linux/cpuhotplug.h | 1 + 22 files changed, 662 insertions(+), 4 deletions(-) create mode 100644 Documentation/virt/kvm/arm/pvsched.rst create mode 100644 arch/arm64/include/asm/pvsched-abi.h create mode 100644 arch/arm64/include/asm/qspinlock.h create mode 100644 arch/arm64/include/asm/qspinlock_paravirt.h create mode 100644 arch/arm64/kernel/paravirt-spinlocks.c create mode 100644 arch/arm64/kernel/trace-paravirt.h create mode 100644 arch/arm64/kvm/pvsched.c -- 2.33.0

2 12

[PATCH] Revert "drm/prime: Unexport helpers for fd/handle conversion"
by Chen Haixiang 11 Jan '24

11 Jan '24

From: Felix Kuehling <Felix.Kuehling(a)amd.com> This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3. These helper functions are needed for KFD to export and import DMABufs the right way without duplicating the tracking of DMABufs associated with GEM objects while ensuring that move notifier callbacks are working as intended. CC: Christian König <christian.koenig(a)amd.com> CC: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Thomas Zimmermann <tzimmermann(a)suse.de> Acked-by: Daniel Vetter <daniel(a)ffwll.ch> Signed-off-by: Felix Kuehling <Felix.Kuehling(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> --- drivers/gpu/drm/drm_prime.c | 33 ++++++++++++++++++--------------- include/drm/drm_prime.h | 7 +++++++ 2 files changed, 25 insertions(+), 15 deletions(-) diff --git a/drivers/gpu/drm/drm_prime.c b/drivers/gpu/drm/drm_prime.c index 63b709a67471..834a5e28abbe 100644 --- a/drivers/gpu/drm/drm_prime.c +++ b/drivers/gpu/drm/drm_prime.c @@ -278,7 +278,7 @@ void drm_gem_dmabuf_release(struct dma_buf *dma_buf) } EXPORT_SYMBOL(drm_gem_dmabuf_release); -/* +/** * drm_gem_prime_fd_to_handle - PRIME import function for GEM drivers * @dev: drm_device to import into * @file_priv: drm file-private structure @@ -292,9 +292,9 @@ EXPORT_SYMBOL(drm_gem_dmabuf_release); * * Returns 0 on success or a negative error code on failure. */ -static int drm_gem_prime_fd_to_handle(struct drm_device *dev, - struct drm_file *file_priv, int prime_fd, - uint32_t *handle) +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle) { struct dma_buf *dma_buf; struct drm_gem_object *obj; @@ -360,6 +360,7 @@ static int drm_gem_prime_fd_to_handle(struct drm_device *dev, dma_buf_put(dma_buf); return ret; } +EXPORT_SYMBOL(drm_gem_prime_fd_to_handle); int drm_prime_fd_to_handle_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -408,7 +409,7 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, return dmabuf; } -/* +/** * drm_gem_prime_handle_to_fd - PRIME export function for GEM drivers * @dev: dev to export the buffer from * @file_priv: drm file-private structure @@ -421,10 +422,10 @@ static struct dma_buf *export_and_register_object(struct drm_device *dev, * The actual exporting from GEM object to a dma-buf is done through the * &drm_gem_object_funcs.export callback. */ -static int drm_gem_prime_handle_to_fd(struct drm_device *dev, - struct drm_file *file_priv, uint32_t handle, - uint32_t flags, - int *prime_fd) +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, + int *prime_fd) { struct drm_gem_object *obj; int ret = 0; @@ -506,6 +507,7 @@ static int drm_gem_prime_handle_to_fd(struct drm_device *dev, return ret; } +EXPORT_SYMBOL(drm_gem_prime_handle_to_fd); int drm_prime_handle_to_fd_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -864,9 +866,9 @@ EXPORT_SYMBOL(drm_prime_get_contiguous_size); * @obj: GEM object to export * @flags: flags like DRM_CLOEXEC and DRM_RDWR * - * This is the implementation of the &drm_gem_object_funcs.export functions - * for GEM drivers using the PRIME helpers. It is used as the default for - * drivers that do not set their own. + * This is the implementation of the &drm_gem_object_funcs.export functions for GEM drivers + * using the PRIME helpers. It is used as the default in + * drm_gem_prime_handle_to_fd(). */ struct dma_buf *drm_gem_prime_export(struct drm_gem_object *obj, int flags) @@ -962,9 +964,10 @@ EXPORT_SYMBOL(drm_gem_prime_import_dev); * @dev: drm_device to import into * @dma_buf: dma-buf object to import * - * This is the implementation of the gem_prime_import functions for GEM - * drivers using the PRIME helpers. It is the default for drivers that do - * not set their own &drm_driver.gem_prime_import. + * This is the implementation of the gem_prime_import functions for GEM drivers + * using the PRIME helpers. Drivers can use this as their + * &drm_driver.gem_prime_import implementation. It is used as the default + * implementation in drm_gem_prime_fd_to_handle(). * * Drivers must arrange to call drm_prime_gem_destroy() from their * &drm_gem_object_funcs.free hook when using this function. diff --git a/include/drm/drm_prime.h b/include/drm/drm_prime.h index a7abf9f3e697..2a1d01e5b56b 100644 --- a/include/drm/drm_prime.h +++ b/include/drm/drm_prime.h @@ -60,12 +60,19 @@ enum dma_data_direction; struct drm_device; struct drm_gem_object; +struct drm_file; /* core prime functions */ struct dma_buf *drm_gem_dmabuf_export(struct drm_device *dev, struct dma_buf_export_info *exp_info); void drm_gem_dmabuf_release(struct dma_buf *dma_buf); +int drm_gem_prime_fd_to_handle(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, uint32_t *handle); +int drm_gem_prime_handle_to_fd(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, uint32_t flags, + int *prime_fd); + /* helper functions for exporting */ int drm_gem_map_attach(struct dma_buf *dma_buf, struct dma_buf_attachment *attach); -- 2.33.0

1 0

[PATCH OLK-6.6 00/30] KVM/arm64: support vtimer/virt_dev irqbypass
by Dongxu Sun 11 Jan '24

11 Jan '24

Dongxu Sun (4): mbigen: vtimer: isolate mbigen vtimer funcs with macro mbigen: vtimer: disable vtimer mbigen probe when vtimer_irqbypass disabled mbigen: probe mbigen driver with arch_initcall KVM: arm64: update arm64 openeuler_defconfig for CONFIG_VIRT_PLAT_DEV Haibin Wang (2): KVM: arm64: arch_timer: Probe vtimer irqbypass capability KVM: arm64: arch_timer: Rework vcpu init/reset logic Kunkun Jiang (6): mbigen: vtimer mbigen driver support irqchip/gic-v4.1: Detect ITS vtimer interrupt bypass capability irqchip/gic-v4.1: Extend VSGI command to support the new vPPI mbigen: vtimer: add support for MBIX1_CPPI_NEGEDGE_CLR_EN_SETR(CLRR) KVM: arm64: vgic-v3: Clearing pending status of vtimer on guest reset mbigen: Sets the regs related to vtimer irqbypass Zenghui Yu (4): KVM: arm64: GICv4.1: Add direct injection capability to PPI registers KVM: arm64: GICv4.1: Allow non-trapping WFI when using direct vtimer interrupt KVM: arm64: vtimer: Expose HW-based vtimer interrupt in debugfs KVM: arm64: arch_timer: Make vtimer_irqbypass a Distributor attr wanghaibin (14): irqchip/gic-v4.1: Rework get/set_irqchip_state callbacks of GICv4.1-sgi chip irqchip/gic-v4.1: Rework its_alloc_vcpu_sgis() to support vPPI allocation irqchip/gic-v4.1: Probe vtimer irqbypass capability at RD level KVM: arm64: GICv4.1: Inform the HiSilicon vtimer irqbypass capability KVM: arm64: vgic: Add helper for vtimer vppi info register KVM: arm64: GICv4.1: Enable vtimer vPPI irqbypass config KVM: arm64: GICv4.1: Add support for MBIGEN save/restore irqchip/gic-v3-its: Introduce the reserved device ID pools irqchip/gic-v3-its: Alloc/Free device id from pools for virtual devices irqchip/gic-v3-its: Add virt platform devices MSI support virt_plat_dev: Register the virt platform device driver KVM: arm64: Introduce shadow device KVM: arm64: kire: irq routing entry cached the relevant cache data KVM: arm64: sdev: Support virq bypass by INT/VSYNC command arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/kvm_emulate.h | 1 + arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arch_timer.c | 220 +++++++- arch/arm64/kvm/arm.c | 44 ++ arch/arm64/kvm/vgic/shadow_dev.c | 327 ++++++++++++ arch/arm64/kvm/vgic/vgic-debug.c | 2 +- arch/arm64/kvm/vgic/vgic-init.c | 6 + arch/arm64/kvm/vgic/vgic-irqfd.c | 39 ++ arch/arm64/kvm/vgic/vgic-mmio-v3.c | 13 + arch/arm64/kvm/vgic/vgic-mmio.c | 24 +- arch/arm64/kvm/vgic/vgic-v3.c | 7 + arch/arm64/kvm/vgic/vgic-v4.c | 57 ++ arch/arm64/kvm/vgic/vgic.c | 25 + arch/arm64/kvm/vgic/vgic.h | 11 + drivers/irqchip/irq-gic-v3-its-platform-msi.c | 39 +- drivers/irqchip/irq-gic-v3-its.c | 283 +++++++++- drivers/irqchip/irq-gic-v3.c | 37 +- drivers/irqchip/irq-gic-v4.c | 23 +- drivers/irqchip/irq-mbigen.c | 486 +++++++++++++++++- drivers/misc/Kconfig | 9 + drivers/misc/Makefile | 1 + drivers/misc/virt_plat_dev.c | 119 +++++ include/clocksource/arm_arch_timer.h | 33 ++ include/kvm/arm_arch_timer.h | 13 + include/kvm/arm_vgic.h | 62 +++ include/linux/irqchip/arm-gic-v3.h | 49 +- include/linux/irqchip/arm-gic-v4.h | 6 +- include/linux/irqchip/arm-vgic-info.h | 2 + include/linux/kvm_host.h | 9 + include/linux/msi.h | 2 + include/uapi/linux/kvm.h | 10 + virt/kvm/eventfd.c | 8 + 33 files changed, 1909 insertions(+), 61 deletions(-) create mode 100644 arch/arm64/kvm/vgic/shadow_dev.c create mode 100644 drivers/misc/virt_plat_dev.c -- 2.33.0

2 31

[PATCH OLK-6.6 v9 0/6] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 11 Jan '24

11 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP; 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. v7->v8: 1) Add detection of mounting part0 while partitions write opened; 2) Add detection of writing partitions while part0 mounted; 3) Add config in openeuler_defconfig. v8->v9: 1) Split bd_mounters into bd_mounted and part_mounters; 2) Add part_writers; 3) Count part_writers and part_mounters regardless of whether BLK_DEV_DETECT_WRITING_PART0 is set. Li Lingfeng (6): block: Record writing and mounting regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted add config about writing mounted devices in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + block/Kconfig | 17 ++++ block/bdev.c | 114 ++++++++++++++++++++----- include/linux/blk_types.h | 3 + include/linux/blkdev.h | 2 + 6 files changed, 123 insertions(+), 19 deletions(-) -- 2.31.1

2 7

[PATCH OLK-6.6 V4 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 11 Jan '24

11 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() openeuler_defconfig: enable CONFIG_BPF_SCHED arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 28 ++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 ++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 479 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 000/124] arm_mpam: support mpam feature in OLK-6.6 repo
by Zeng Heng 11 Jan '24

11 Jan '24

Amit Singh Tomar (1): fs/resctrl: Remove the limit on the number of CLOSID Babu Moger (9): x86/resctrl: Add multiple tasks to the resctrl group at once x86/resctrl: Simplify rftype flag definitions x86/resctrl: Rename rftype flags for consistency x86/resctrl: Unwind properly from rdt_enable_ctx() x86/resctrl: Move default group file creation to mount x86/resctrl: Introduce "-o debug" mount option x86/resctrl: Display CLOSID for resource group x86/resctrl: Add support for the files of MON groups only x86/resctrl: Display RMID of resource group Fenghua Yu (1): x86/resctrl: Add sparse_masks file in info James Morse (104): tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef x86/resctrl: kfree() rmid_ptrs from resctrl_exit() x86/resctrl: Create helper for RMID allocation and mondata dir creation x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare() x86/resctrl: Track the closid with the rmid x86/resctrl: Access per-rmid structures by index x86/resctrl: Allow RMID allocation to be scoped by CLOSID x86/resctrl: Track the number of dirty RMID a CLOSID has x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid x86/resctrl: Move CLOSID/RMID matching and setting to use helpers x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow x86/resctrl: Queue mon_event_read() instead of sending an IPI x86/resctrl: Allow resctrl_arch_rmid_read() to sleep x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read() x86/resctrl: Make resctrl_mounted checks explicit x86/resctrl: Move alloc/mon static keys into helpers x86/resctrl: Make rdt_enable_key the arch's decision to switch x86/resctrl: Add helpers for system wide mon/alloc capable x86/resctrl: Add CPU online callback for resctrl work x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but cpu x86/resctrl: Add CPU offline callback for resctrl work x86/resctrl: Move domain helper migration into resctrl_offline_cpu() x86/resctrl: Separate arch and fs resctrl locks x86/resctrl: Add a helper to avoid reaching into the arch code resource list x86/resctrl: Move ctrlval string parsing links away from the arch code x86/resctrl: Add helper for setting CPU default properties x86/resctrl: Remove rdtgroup from update_cpu_closid_rmid() x86/resctrl: Export resctrl fs's init function x86/resctrl: Wrap resctrl_arch_find_domain() around rdt_find_domain() x86/resctrl: Move resctrl types to a separate header x86/resctrl: Add a resctrl helper to reset all the resources x86/resctrl: Move monitor init work to a resctrl init call x86/resctrl: Move monitor exit work to a restrl exit call x86/resctrl: Move max_{name,data}_width into resctrl code x86/resctrl: Stop using the for_each_*_rdt_resource() walkers x86/resctrl: Export the is_mbm_*_enabled() helpers to asm/resctrl.h x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers x86/resctrl: Allow resctrl_arch_mon_event_config_write() to return an error x86/resctrl: Allow an architecture to disable pseudo lock x86/resctrl: Make prefetch_disable_bits belong to the arch code x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr x86/resctrl: Move thread_throttle_mode_init() to be managed by resctrl x86/resctrl: Move get_config_index() to a header x86/resctrl: Claim get_domain_from_cpu() for resctrl x86/resctrl: Describe resctrl's bitmap size assumptions x86/resctrl: Drop __init/__exit on assorted symbols fs/resctrl: Add boiler plate for external resctrl code x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl x86/resctrl: Move the filesystem portions of resctrl to live in '/fs/' arm64: head.S: Initialise MPAM EL2 registers and disable traps arm64: cpufeature: discover CPU support for MPAM KVM: arm64: Fix missing traps of guest accesses to the MPAM registers KVM: arm64: Disable MPAM visibility by default, and handle traps arm64: mpam: Context switch the MPAM registers untested: KVM: arm64: Force guest EL1 to use user-space's partid configuration ACPI / PPTT: Provide a helper to walk processor containers ACPI / PPTT: Find PPTT cache level by ID ACPI / PPTT: Add a helper to fill a cpumask from a processor container ACPI / PPTT: Add a helper to fill a cpumask from a cache_id cacheinfo: Expose the code to generate a cache-id from a device_node drivers: base: cacheinfo: Add helper to find the cache size from cpu+level ACPI / MPAM: Parse the MPAM table arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate arm_mpam: Add the class and component structures for ris firmware described arm_mpam: Add MPAM MSC register layout definitions arm_mpam: Add cpuhp callbacks to probe MSC hardware arm_mpam: Probe MSCs to find the supported partid/pmg values arm_mpam: Probe the hardware features resctrl supports arm_mpam: Merge supported features during mpam_enable() into mpam_class arm_mpam: Reset MSC controls from cpu hp callbacks arm_mpam: Add a helper to touch an MSC from any CPU arm_mpam: Extend reset logic to allow devices to be reset any time arm_mpam: Register and enable IRQs arm_mpam: Use the arch static key to indicate when mpam is enabled arm_mpam: Allow configuration to be applied and restored during cpu online arm_mpam: Probe and reset the rest of the features arm_mpam: Add helpers to allocate monitors arm_mpam: Add mpam_msmon_read() to read monitor value arm_mpam: Track bandwidth counter state for overflow and power management arm_mpam: Add helper to reset saved mbwu state arm_mpam: resctrl: Add boilerplate cpuhp and domain allocation arm_mpam: resctrl: Pick the caches we will use as resctrl resources arm_mpam: resctrl: Pick a value for num_rmid arm_mpam: resctrl: Implement resctrl_arch_reset_resources() arm_mpam: resctrl: Add resctrl_arch_get_config() arm_mpam: resctrl: Implement helpers to update configuration arm_mpam: resctrl: Add CDP emulation arm64: mpam: Add helpers to change a tasks and cpu mpam partid/pmg values arm_mpam: resctrl: Add rmid index helpers untested: arm_mpam: resctrl: Add support for MB resource untested: arm_mpam: resctrl: Add support for mbm counters arm_mpam: resctrl: Allow resctrl to allocate monitors arm_mpam: resctrl: Add resctrl_arch_rmid_read() and resctrl_arch_reset_rmid() untested: arm_mpam: resctrl: Allow monitors to be configured arm_mpam: resctrl: Add empty definitions for pseudo lock arm_mpam: resctrl: Add empty definitions for fine-grained enables arm_mpam: resctrl: Add dummy definition for free running counters arm64: mpam: Select ARCH_HAS_CPU_RESCTRL perf/arm-cmn: Stop claiming all the resources arm_mpam: resctrl: Tell resctrl about cpu/domain online/offline arm_mpam: resctrl: Call resctrl_exit() in the event of errors arm_mpam: resctrl: Update the rmid reallocation limit Maciej Wieczor-Retman (3): x86/resctrl: Fix remaining kernel-doc warnings x86/resctrl: Rename arch_has_sparse_bitmaps x86/resctrl: Enable non-contiguous CBMs in Intel CAT Rob Herring (3): cacheinfo: Allow for >32-bit cache 'id' cacheinfo: Set cache 'id' based on DT data dt-bindings: arm: Add MPAM MSC binding Rohit Mathew (2): arm_mpam: Probe for long/lwd mbwu counters arm_mpam: Use long MBWU counters if supported Zeng Heng (1): arm_mpam: control memory bandwidth with hard limit flag .../arch/arm64/cpu-feature-registers.rst | 2 + Documentation/arch/x86/resctrl.rst | 22 +- .../devicetree/bindings/arm/arm,mpam-msc.yaml | 227 + MAINTAINERS | 2 + arch/Kconfig | 8 + arch/arm64/Kconfig | 22 +- arch/arm64/include/asm/cpu.h | 1 + arch/arm64/include/asm/cpufeature.h | 13 + arch/arm64/include/asm/el2_setup.h | 16 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/mpam.h | 167 + arch/arm64/include/asm/resctrl.h | 1 + arch/arm64/include/asm/sysreg.h | 8 + arch/arm64/include/asm/thread_info.h | 3 + arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/cpufeature.c | 68 + arch/arm64/kernel/cpuinfo.c | 4 + arch/arm64/kernel/image-vars.h | 5 + arch/arm64/kernel/mpam.c | 23 + arch/arm64/kernel/process.c | 7 + arch/arm64/kvm/hyp/include/hyp/switch.h | 32 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 27 + arch/arm64/kvm/hyp/nvhe/switch.c | 11 + arch/arm64/kvm/hyp/vhe/sysreg-sr.c | 1 + arch/arm64/kvm/sys_regs.c | 70 +- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 33 + arch/x86/Kconfig | 5 +- arch/x86/include/asm/resctrl.h | 131 +- arch/x86/kernel/cpu/resctrl/core.c | 212 +- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 476 +- arch/x86/kernel/cpu/resctrl/internal.h | 394 +- arch/x86/kernel/cpu/resctrl/monitor.c | 594 +-- arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 1123 +---- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 3916 +--------------- drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 2 + drivers/acpi/arm64/mpam.c | 369 ++ drivers/acpi/pptt.c | 278 +- drivers/acpi/tables.c | 2 +- drivers/base/cacheinfo.c | 41 +- drivers/perf/arm-cmn.c | 12 +- drivers/platform/Kconfig | 2 + drivers/platform/Makefile | 1 + drivers/platform/mpam/Kconfig | 8 + drivers/platform/mpam/Makefile | 1 + drivers/platform/mpam/mpam_devices.c | 2422 ++++++++++ drivers/platform/mpam/mpam_internal.h | 576 +++ drivers/platform/mpam/mpam_resctrl.c | 1209 +++++ fs/Kconfig | 1 + fs/Makefile | 1 + fs/resctrl/Kconfig | 23 + fs/resctrl/Makefile | 1 + fs/resctrl/ctrlmondata.c | 528 +++ fs/resctrl/internal.h | 313 ++ fs/resctrl/monitor.c | 859 ++++ fs/resctrl/psuedo_lock.c | 1134 +++++ fs/resctrl/rdtgroup.c | 4015 +++++++++++++++++ include/linux/acpi.h | 17 + include/linux/arm_mpam.h | 105 + include/linux/cacheinfo.h | 30 +- include/linux/resctrl.h | 203 +- include/linux/resctrl_types.h | 98 + include/linux/tick.h | 9 +- 64 files changed, 13418 insertions(+), 6472 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,mpam-msc.yaml create mode 100644 arch/arm64/include/asm/mpam.h create mode 100644 arch/arm64/include/asm/resctrl.h create mode 100644 arch/arm64/kernel/mpam.c create mode 100644 drivers/acpi/arm64/mpam.c create mode 100644 drivers/platform/mpam/Kconfig create mode 100644 drivers/platform/mpam/Makefile create mode 100644 drivers/platform/mpam/mpam_devices.c create mode 100644 drivers/platform/mpam/mpam_internal.h create mode 100644 drivers/platform/mpam/mpam_resctrl.c create mode 100644 fs/resctrl/Kconfig create mode 100644 fs/resctrl/Makefile create mode 100644 fs/resctrl/ctrlmondata.c create mode 100644 fs/resctrl/internal.h create mode 100644 fs/resctrl/monitor.c create mode 100644 fs/resctrl/psuedo_lock.c create mode 100644 fs/resctrl/rdtgroup.c create mode 100644 include/linux/arm_mpam.h create mode 100644 include/linux/resctrl_types.h -- 2.25.1

2 125

[PATCH OLK-5.10] drm/radeon: possible buffer overflow
by Baogen Shang 11 Jan '24

11 Jan '24

From: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> stable inclusion from stable-v5.10.205 commit 7b063c93bece827fde237fae1c101bceeee4e896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit dd05484f99d16715a88eedfca363828ef9a4c2d4 ] Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1(a)huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 11e3e99a9f01..96dbf595254c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4819,14 +4819,15 @@ int evergreen_irq_process(struct radeon_device *rdev) break; case 44: /* hdmi */ afmt_idx = src_data; - if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) - DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); - if (afmt_idx > 5) { DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + + if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) + DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); + afmt_status[afmt_idx] &= ~AFMT_AZ_FORMAT_WTRIG; queue_hdmi = true; DRM_DEBUG("IH: HDMI%d\n", afmt_idx + 1); -- 2.33.0

1 0

[PATCH openEuler-1.0-LTS v2] time: Handle negative seconds correctly in timespec64_to_ns()
by liwei 11 Jan '24

11 Jan '24

From: Lukas Hannen <lukas.hannen(a)opensource.tttech-industrial.com> mainline inclusion from mainline-v5.15-rc1 commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA --------------------------- timespec64_ns() prevents multiplication overflows by comparing the seconds value of the timespec to KTIME_SEC_MAX. If the value is greater or equal it returns KTIME_MAX. But that check casts the signed seconds value to unsigned which makes the comparision true for all negative values and therefore return wrongly KTIME_MAX. Negative second values are perfectly valid and required in some places, e.g. ptp_clock_adjtime(). Remove the cast and add a check for the negative boundary which is required to prevent undefined behaviour due to multiplication underflow. Fixes: cb47755725da ("time: Prevent undefined behaviour in timespec64_to_ns()")' Signed-off-by: Lukas Hannen <lukas.hannen(a)opensource.tttech-industrial.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/AM6PR01MB541637BD6F336B8FFB72AF80EEC69@AM6PR01MB5… Signed-off-by: liwei <liwei728(a)huawei.com> --- include/linux/time64.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/time64.h b/include/linux/time64.h index e58f59674ad6..681c2e34034a 100644 --- a/include/linux/time64.h +++ b/include/linux/time64.h @@ -39,7 +39,9 @@ struct itimerspec64 { /* Located here for timespec[64]_valid_strict */ #define TIME64_MAX ((s64)~((u64)1 << 63)) #define KTIME_MAX ((s64)~((u64)1 << 63)) +#define KTIME_MIN (-KTIME_MAX - 1) #define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) +#define KTIME_SEC_MIN (KTIME_MIN / NSEC_PER_SEC) /* * Limits for settimeofday(): @@ -140,10 +142,13 @@ static inline bool timespec64_valid_settod(const struct timespec64 *ts) */ static inline s64 timespec64_to_ns(const struct timespec64 *ts) { - /* Prevent multiplication overflow */ - if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + /* Prevent multiplication overflow / underflow */ + if (ts->tv_sec >= KTIME_SEC_MAX) return KTIME_MAX; + if (ts->tv_sec <= KTIME_SEC_MIN) + return KTIME_MIN; + return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec; } -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS v2] timerqueue: Use rb_entry_safe() in timerqueue_getnext()
by liwei 11 Jan '24

11 Jan '24

From: Barnabás Pőcze <pobrn(a)protonmail.com> mainline inclusion from mainline-v6.2-rc1 commit 2f117484329b233455ee278f2d9b0a4356835060 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA --------------------------- When `timerqueue_getnext()` is called on an empty timer queue, it will use `rb_entry()` on a NULL pointer, which is invalid. Fix that by using `rb_entry_safe()` which handles NULL pointers. This has not caused any issues so far because the offset of the `rb_node` member in `timerqueue_node` is 0, so `rb_entry()` is essentially a no-op. Fixes: 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next timer") Signed-off-by: Barnabás Pőcze <pobrn(a)protonmail.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Link: https://lore.kernel.org/r/20221114195421.342929-1-pobrn@protonmail.com Signed-off-by: liwei <liwei728(a)huawei.com> --- include/linux/timerqueue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h index f71c1ce1421f..bcc0afc62522 100644 --- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -40,7 +40,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head) { struct rb_node *leftmost = rb_first_cached(&head->rb_root); - return rb_entry(leftmost, struct timerqueue_node, node); + return rb_entry_safe(leftmost, struct timerqueue_node, node); } static inline void timerqueue_init(struct timerqueue_node *node) -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS v2] efi/x86: Map the entire EFI vendor string before copying it
by liwei 11 Jan '24

11 Jan '24

From: Ard Biesheuvel <ardb(a)kernel.org> mainline inclusion from mainline-v5.6-rc1 commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA --------------------------- Fix a couple of issues with the way we map and copy the vendor string: - we map only 2 bytes, which usually works since you get at least a page, but if the vendor string happens to cross a page boundary, a crash will result - only call early_memunmap() if early_memremap() succeeded, or we will call it with a NULL address which it doesn't like, - while at it, switch to early_memremap_ro(), and array indexing rather than pointer dereferencing to read the CHAR16 characters. Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Arvind Sankar <nivedita(a)alum.mit.edu> Cc: Matthew Garrett <mjg59(a)google.com> Cc: linux-efi(a)vger.kernel.org Fixes: 5b83683f32b1 ("x86: EFI runtime service support") Link: https://lkml.kernel.org/r/20200103113953.9571-5-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: liwei <liwei728(a)huawei.com> --- arch/x86/platform/efi/efi.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index b8cb57edd424..d8f295926485 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -446,7 +446,6 @@ void __init efi_init(void) efi_char16_t *c16; char vendor[100] = "unknown"; int i = 0; - void *tmp; #ifdef CONFIG_X86_32 if (boot_params.efi_info.efi_systab_hi || @@ -471,14 +470,16 @@ void __init efi_init(void) /* * Show what we know for posterity */ - c16 = tmp = early_memremap(efi.systab->fw_vendor, 2); + c16 = early_memremap_ro(efi.systab->fw_vendor, + sizeof(vendor) * sizeof(efi_char16_t)); if (c16) { - for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i) - vendor[i] = *c16++; + for (i = 0; i < sizeof(vendor) - 1 && c16[i]; ++i) + vendor[i] = c16[i]; vendor[i] = '\0'; - } else + early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t)); + } else { pr_err("Could not map the firmware vendor!\n"); - early_memunmap(tmp, 2); + } pr_info("EFI v%u.%.02u by %s\n", efi.systab->hdr.revision >> 16, -- 2.25.1

2 1

[PATCH OLK-5.10] drm/radeon: possible buffer overflow
by Baogen Shang 11 Jan '24

11 Jan '24

From: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> stable inclusion from stable-v5.10.205 commit 7b063c93bece827fde237fae1c101bceeee4e896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit dd05484f99d16715a88eedfca363828ef9a4c2d4 ] Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1(a)huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 11e3e99a9f01..96dbf595254c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4819,14 +4819,15 @@ int evergreen_irq_process(struct radeon_device *rdev) break; case 44: /* hdmi */ afmt_idx = src_data; - if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) - DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); - if (afmt_idx > 5) { DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + + if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) + DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); + afmt_status[afmt_idx] &= ~AFMT_AZ_FORMAT_WTRIG; queue_hdmi = true; DRM_DEBUG("IH: HDMI%d\n", afmt_idx + 1); -- 2.33.0

1 0

[PATCH openEuler-1.0-LTS] efi/x86: Map the entire EFI vendor string before copying it
by liwei 11 Jan '24

11 Jan '24

From: Ard Biesheuvel <ardb(a)kernel.org> mainline inclusion form mainline-v5.6-rc1 commit ffc2760bcf2dba0dbef74013ed73eea8310cc52c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA ---------------------------------- Fix a couple of issues with the way we map and copy the vendor string: - we map only 2 bytes, which usually works since you get at least a page, but if the vendor string happens to cross a page boundary, a crash will result - only call early_memunmap() if early_memremap() succeeded, or we will call it with a NULL address which it doesn't like, - while at it, switch to early_memremap_ro(), and array indexing rather than pointer dereferencing to read the CHAR16 characters. Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel(a)linaro.org> Cc: Arvind Sankar <nivedita(a)alum.mit.edu> Cc: Matthew Garrett <mjg59(a)google.com> Cc: linux-efi(a)vger.kernel.org Fixes: 5b83683f32b1 ("x86: EFI runtime service support") Link: https://lkml.kernel.org/r/20200103113953.9571-5-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Signed-off-by: liwei <liwei728(a)huawei.com> --- arch/x86/platform/efi/efi.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index b8cb57edd424..d8f295926485 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -446,7 +446,6 @@ void __init efi_init(void) efi_char16_t *c16; char vendor[100] = "unknown"; int i = 0; - void *tmp; #ifdef CONFIG_X86_32 if (boot_params.efi_info.efi_systab_hi || @@ -471,14 +470,16 @@ void __init efi_init(void) /* * Show what we know for posterity */ - c16 = tmp = early_memremap(efi.systab->fw_vendor, 2); + c16 = early_memremap_ro(efi.systab->fw_vendor, + sizeof(vendor) * sizeof(efi_char16_t)); if (c16) { - for (i = 0; i < sizeof(vendor) - 1 && *c16; ++i) - vendor[i] = *c16++; + for (i = 0; i < sizeof(vendor) - 1 && c16[i]; ++i) + vendor[i] = c16[i]; vendor[i] = '\0'; - } else + early_memunmap(c16, sizeof(vendor) * sizeof(efi_char16_t)); + } else { pr_err("Could not map the firmware vendor!\n"); - early_memunmap(tmp, 2); + } pr_info("EFI v%u.%.02u by %s\n", efi.systab->hdr.revision >> 16, -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] timerqueue: Use rb_entry_safe() in timerqueue_getnext()
by liwei 11 Jan '24

11 Jan '24

From: Barnabás Pőcze <pobrn(a)protonmail.com> mainline inclusion form mainline-v6.2-rc1 commit 2f117484329b233455ee278f2d9b0a4356835060 category: bugfix https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA ---------------------------------- When `timerqueue_getnext()` is called on an empty timer queue, it will use `rb_entry()` on a NULL pointer, which is invalid. Fix that by using `rb_entry_safe()` which handles NULL pointers. This has not caused any issues so far because the offset of the `rb_node` member in `timerqueue_node` is 0, so `rb_entry()` is essentially a no-op. Fixes: 511885d7061e ("lib/timerqueue: Rely on rbtree semantics for next timer") Signed-off-by: Barnabás Pőcze <pobrn(a)protonmail.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Link: https://lore.kernel.org/r/20221114195421.342929-1-pobrn@protonmail.com Signed-off-by: liwei <liwei728(a)huawei.com> --- include/linux/timerqueue.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/timerqueue.h b/include/linux/timerqueue.h index f71c1ce1421f..bcc0afc62522 100644 --- a/include/linux/timerqueue.h +++ b/include/linux/timerqueue.h @@ -40,7 +40,7 @@ struct timerqueue_node *timerqueue_getnext(struct timerqueue_head *head) { struct rb_node *leftmost = rb_first_cached(&head->rb_root); - return rb_entry(leftmost, struct timerqueue_node, node); + return rb_entry_safe(leftmost, struct timerqueue_node, node); } static inline void timerqueue_init(struct timerqueue_node *node) -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] time: Handle negative seconds correctly in timespec64_to_ns()
by liwei 11 Jan '24

11 Jan '24

From: Lukas Hannen <lukas.hannen(a)opensource.tttech-industrial.com> mainline inclusion form mainline-v5.15-rc1 commit 39ff83f2f6cc5cc1458dfcea9697f96338210beb category: bugfix https://gitee.com/openeuler/kernel/issues/I8MCB5 CVE: NA ---------------------------------- timespec64_ns() prevents multiplication overflows by comparing the seconds value of the timespec to KTIME_SEC_MAX. If the value is greater or equal it returns KTIME_MAX. But that check casts the signed seconds value to unsigned which makes the comparision true for all negative values and therefore return wrongly KTIME_MAX. Negative second values are perfectly valid and required in some places, e.g. ptp_clock_adjtime(). Remove the cast and add a check for the negative boundary which is required to prevent undefined behaviour due to multiplication underflow. Fixes: cb47755725da ("time: Prevent undefined behaviour in timespec64_to_ns()")' Signed-off-by: Lukas Hannen <lukas.hannen(a)opensource.tttech-industrial.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/AM6PR01MB541637BD6F336B8FFB72AF80EEC69@AM6PR01MB5… Signed-off-by: liwei <liwei728(a)huawei.com> --- include/linux/time64.h | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/time64.h b/include/linux/time64.h index e58f59674ad6..681c2e34034a 100644 --- a/include/linux/time64.h +++ b/include/linux/time64.h @@ -39,7 +39,9 @@ struct itimerspec64 { /* Located here for timespec[64]_valid_strict */ #define TIME64_MAX ((s64)~((u64)1 << 63)) #define KTIME_MAX ((s64)~((u64)1 << 63)) +#define KTIME_MIN (-KTIME_MAX - 1) #define KTIME_SEC_MAX (KTIME_MAX / NSEC_PER_SEC) +#define KTIME_SEC_MIN (KTIME_MIN / NSEC_PER_SEC) /* * Limits for settimeofday(): @@ -140,10 +142,13 @@ static inline bool timespec64_valid_settod(const struct timespec64 *ts) */ static inline s64 timespec64_to_ns(const struct timespec64 *ts) { - /* Prevent multiplication overflow */ - if ((unsigned long long)ts->tv_sec >= KTIME_SEC_MAX) + /* Prevent multiplication overflow / underflow */ + if (ts->tv_sec >= KTIME_SEC_MAX) return KTIME_MAX; + if (ts->tv_sec <= KTIME_SEC_MIN) + return KTIME_MIN; + return ((s64) ts->tv_sec * NSEC_PER_SEC) + ts->tv_nsec; } -- 2.25.1

2 1

[PATCH OLK-6.6 v2 00/10] ACPI & PCI bugfix from 22.03 SP3
by Xiongfeng Wang 11 Jan '24

11 Jan '24

Xiongfeng Wang (10): pci: do not save 'PCI_BRIDGE_CTL_BUS_RESET' PCI: check BIR before mapping MSI-X Table PCI: Fail MSI-X mapping if MSI-X Table offset is out of range of BAR space sysrq: avoid concurrently info printing by 'sysrq-trigger' PCI: Add MCFG quirks for some Hisilicon Chip host controllers PCI: add a member in 'struct pci_bus' to record the original 'pci_ops' PCI/AER: increments pci bus reference count in aer-inject process ntp: Avoid undefined behaviour in second_overflow() hinic: ethtool: Allow userspace to set more aggregation params PCI/sysfs: Take reference on device to be removed drivers/acpi/pci_mcfg.c | 4 ++++ drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 10 +++++----- drivers/pci/bus.c | 2 ++ drivers/pci/msi/msi.c | 11 +++++++++++ drivers/pci/pci-sysfs.c | 9 +++++++-- drivers/pci/pci.c | 3 +++ drivers/pci/pcie/aer_inject.c | 9 +++++++++ drivers/pci/probe.c | 12 +++++++++--- drivers/tty/sysrq.c | 6 ++++++ include/linux/pci.h | 1 + kernel/time/ntp.c | 2 ++ 11 files changed, 59 insertions(+), 10 deletions(-) -- 2.20.1

2 11

[PATCH OLK-6.6 V3 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 11 Jan '24

11 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() openeuler_defconfig: enable CONFIG_BPF_SCHED arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 27 ++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 ++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 478 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 V2 00/11] sched: basic infrastructure for scheduler bpf
by Guan Jing 11 Jan '24

11 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (11): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() fs/proc/base.c | 64 +++++++++++++++++ include/linux/bpf_sched.h | 50 ++++++++++++++ include/linux/bpf_types.h | 4 ++ include/linux/sched.h | 27 ++++++++ include/linux/sched_hook_defs.h | 4 ++ include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 ++++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 +++++++++++++++++ kernel/sched/build_utility.c | 4 ++ kernel/sched/core.c | 118 ++++++++++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 23 files changed, 476 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 12

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 11 Jan '24

11 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 11 Jan '24

11 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/pid.h | 2 + include/linux/pid_namespace.h | 3 ++ init/Kconfig | 7 ++++ kernel/pid.c | 54 +++++++++++++++++++++++++- kernel/pid_namespace.c | 13 +++++++ kernel/sysctl.c | 2 + kernel/trace/pid_list.c | 4 ++ kernel/trace/trace.c | 4 ++ kernel/trace/trace.h | 2 + 11 files changed, 91 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..a040a64a8350 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -999,6 +999,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..e5dd6035346e 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1015,6 +1015,7 @@ CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..6c670c14395f 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,10 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + depends on PID_NS + default n + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..db99713600fc 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -59,12 +59,16 @@ struct pid init_struct_pid = { }, } }; -int pid_max = PID_MAX_DEFAULT; - #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE +int pid_max = PID_MAX_DEFAULT; int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +84,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +201,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +245,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +661,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +702,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +712,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 11 Jan '24

11 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/pid.h | 2 + include/linux/pid_namespace.h | 3 ++ init/Kconfig | 7 ++++ kernel/pid.c | 54 +++++++++++++++++++++++++- kernel/pid_namespace.c | 13 +++++++ kernel/sysctl.c | 2 + kernel/trace/pid_list.c | 4 ++ kernel/trace/trace.c | 4 ++ kernel/trace/trace.h | 2 + 11 files changed, 91 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..a040a64a8350 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -999,6 +999,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..e5dd6035346e 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1015,6 +1015,7 @@ CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..2c84b30aff6b 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,10 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + depends on PID_NS + default n + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..db99713600fc 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -59,12 +59,16 @@ struct pid init_struct_pid = { }, } }; -int pid_max = PID_MAX_DEFAULT; - #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE +int pid_max = PID_MAX_DEFAULT; int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +84,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +201,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +245,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +661,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +702,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +712,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH OLK-6.6 0/8] *** SUBJECT HERE ***
by lishusen 11 Jan '24

11 Jan '24

*** BLURB HERE *** Quan Zhou (5): KVM: arm64: Support a new HiSi CPU type KVM: arm64: Probe and configure DVMBM capability on HiSi CPUs KVM: arm64: Add kvm_vcpu_arch::cpus_ptr and pre_cpus_ptr KVM: arm64: Add kvm_arch::dvm_cpumask and dvm_lock KVM: arm64: Implement the capability of DVMBM Yanan Wang (1): KVM: arm64: Only probe Hisi ncsnp feature on Hisi CPUs Zenghui Yu (2): KVM: arm64: Probe Hisi CPU TYPE from ACPI/DTB KVM: arm64: Add support for probing Hisi ncsnp capability .../admin-guide/kernel-parameters.txt | 3 + arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/kvm_host.h | 16 + arch/arm64/kernel/image-vars.h | 5 + arch/arm64/kvm/Kconfig | 1 + arch/arm64/kvm/Makefile | 1 + arch/arm64/kvm/arm.c | 52 +++ arch/arm64/kvm/hisilicon/Kconfig | 7 + arch/arm64/kvm/hisilicon/Makefile | 2 + arch/arm64/kvm/hisilicon/hisi_virt.c | 389 ++++++++++++++++++ arch/arm64/kvm/hisilicon/hisi_virt.h | 61 +++ arch/arm64/kvm/hyp/pgtable.c | 2 +- 12 files changed, 539 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/kvm/hisilicon/Kconfig create mode 100644 arch/arm64/kvm/hisilicon/Makefile create mode 100644 arch/arm64/kvm/hisilicon/hisi_virt.c create mode 100644 arch/arm64/kvm/hisilicon/hisi_virt.h -- 2.33.0

2 9

[PATCH OLK-6.6 0/4] Add L3T and LPDDRC pmu
by Chen Jun 10 Jan '24

10 Jan '24

Chen Jun (4): perf: hisi: Make irq shared perf: hisi: Fix read sccl_id and ccl_id error in some platform perf: hisi: Add support for HiSilicon SoC L3T PMU perf: hisi: Add support for HiSilicon SoC LPDDRC PMU arch/arm64/configs/openeuler_defconfig | 2 + drivers/perf/hisilicon/Kconfig | 18 + drivers/perf/hisilicon/Makefile | 2 + drivers/perf/hisilicon/hisi_uncore_l3t_pmu.c | 403 +++++++++++++++++ .../perf/hisilicon/hisi_uncore_lpddrc_pmu.c | 408 ++++++++++++++++++ drivers/perf/hisilicon/hisi_uncore_pmu.c | 46 +- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 + 7 files changed, 870 insertions(+), 11 deletions(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_l3t_pmu.c create mode 100644 drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c -- 2.17.1

2 5

[PATCH OLK-6.6 V3 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 10 Jan '24

10 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() openeuler_defconfig: enable CONFIG_BPF_SCHED arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 27 ++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 ++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 478 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH OLK-6.6 V2 00/11] sched: basic infrastructure for scheduler bpf
by Guan Jing 10 Jan '24

10 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (11): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() fs/proc/base.c | 64 +++++++++++++++++ include/linux/bpf_sched.h | 50 ++++++++++++++ include/linux/bpf_types.h | 4 ++ include/linux/sched.h | 27 ++++++++ include/linux/sched_hook_defs.h | 4 ++ include/uapi/linux/bpf.h | 2 + init/init_task.c | 3 + kernel/bpf/Kconfig | 12 ++++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 64 +++++++++++++++++ kernel/sched/build_utility.c | 4 ++ kernel/sched/core.c | 118 ++++++++++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 2 + tools/include/uapi/linux/bpf.h | 2 + tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 23 files changed, 476 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 12

[PATCH OLK-5.10] drm/radeon: possible buffer overflow
by Baogen Shang 10 Jan '24

10 Jan '24

From: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> stable inclusion from stable-v5.10.205 commit 7b063c93bece827fde237fae1c101bceeee4e896 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit dd05484f99d16715a88eedfca363828ef9a4c2d4 ] Buffer 'afmt_status' of size 6 could overflow, since index 'afmt_idx' is checked after access. Fixes: 5cc4e5fc293b ("drm/radeon: Cleanup HDMI audio interrupt handling for evergreen") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1(a)huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze(a)huawei.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/radeon/evergreen.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index 11e3e99a9f01..96dbf595254c 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -4819,14 +4819,15 @@ int evergreen_irq_process(struct radeon_device *rdev) break; case 44: /* hdmi */ afmt_idx = src_data; - if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) - DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); - if (afmt_idx > 5) { DRM_ERROR("Unhandled interrupt: %d %d\n", src_id, src_data); break; } + + if (!(afmt_status[afmt_idx] & AFMT_AZ_FORMAT_WTRIG)) + DRM_DEBUG("IH: IH event w/o asserted irq bit?\n"); + afmt_status[afmt_idx] &= ~AFMT_AZ_FORMAT_WTRIG; queue_hdmi = true; DRM_DEBUG("IH: HDMI%d\n", afmt_idx + 1); -- 2.33.0

1 0

[PATCH OLK-5.10] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
by Baogen Shang 10 Jan '24

10 Jan '24

From: Lukasz Majczak <lma(a)semihalf.com> stable inclusion from stable-v5.10.205 commit 31c31a78dccfc6ad15af1f6e55ce8cfbb3d31fa5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 3d887d512494d678b17c57b835c32f4e48d34f26 ] As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable(a)vger.kernel.org> # 4.14+ Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> Reviewed-by: Radoslaw Biernacki <rad(a)chromium.org> Signed-off-by: Manasi Navare <navaremanasi(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@se… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index b5e15933cb5f..27305f339881 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2612,14 +2612,14 @@ static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper( struct drm_dp_mst_branch *found_mstb; struct drm_dp_mst_port *port; + if (!mstb) + return NULL; + if (memcmp(mstb->guid, guid, 16) == 0) return mstb; list_for_each_entry(port, &mstb->ports, next) { - if (!port->mstb) - continue; - found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid); if (found_mstb) -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
by Baogen Shang 10 Jan '24

10 Jan '24

From: Qu Huang <qu.huang(a)linux.dev> stable inclusion from stable-v5.10.205 commit f475d5502f33a6c5b149b0afe96316ad1962a64a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 5104fdf50d326db2c1a994f8b35dcd46e63ae4ad ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <qu.huang(a)linux.dev> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 00a190929b55..48df32dd352e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -575,6 +575,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf, ssize_t result = 0; int r; + if (!adev->smc_rreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; @@ -634,6 +637,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user * ssize_t result = 0; int r; + if (!adev->smc_wreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: correct the amdgpu runtime dereference usage count
by Baogen Shang 10 Jan '24

10 Jan '24

From: Prike Liang <Prike.Liang(a)amd.com> stable inclusion from stable-v5.10.205 commit d4fb20dcc13b37ee4f02025cd1dc8054d6027721 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ] Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang(a)amd.com> Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7cc7af2a6822..3671a700189d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -299,13 +299,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set, adev->have_disp_power_ref = true; return ret; } - /* if we have no active crtcs, then drop the power ref - we got before */ - if (!active && adev->have_disp_power_ref) { - pm_runtime_put_autosuspend(dev->dev); + /* if we have no active crtcs, then go to + * drop the power ref we got before + */ + if (!active && adev->have_disp_power_ref) adev->have_disp_power_ref = false; - } - out: /* drop the power reference we got coming in here */ pm_runtime_put_autosuspend(dev->dev); -- 2.33.0

1 0

[PATCH OLK-6.6 00/31] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 Jean-Philippe Brucker (1): iommu/arm-smmu-v3: Add support for Hardware Translation Table Update Keqian Zhu (3): iommu: Introduce dirty log tracking framework vfio/iommu_type1: Fix the logic of updating num_non_hwdbm_domains iommu: Stop tracking the dirty log status of iommu_domain Kunkun Jiang (18): iommu/io-pgtable-arm: Add quirk ARM_HD and ARM_BBMLx iommu/io-pgtable-arm: Fix attach device failed when smmuv3 supports HTTU iommu/io-pgtable-arm: Add and realize split_block ops iommu/io-pgtable-arm: Add and realize merge_page ops iommu/io-pgtable-arm: Add and realize sync_dirty_log ops iommu/io-pgtable-arm: Add and realize clear_dirty_log ops iommu/arm-smmu-v3: Add feature detection for BBML iommu/arm-smmu-v3: Realize switch_dirty_log iommu ops iommu/arm-smmu-v3: Realize sync_dirty_log iommu ops iommu/arm-smmu-v3: Realize clear_dirty_log iommu ops iommu/arm-smmu-v3: Realize support_dirty_log iommu ops vfio/iommu_type1: Add HWDBM status maintenance vfio/iommu_type1: Optimize dirty bitmap population based on iommu HWDBM vfio/iommu_type1: Add support for manual dirty log clear vfio/iommu_type1: replace kvmalloc with kvzalloc and kfree with kvfree iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping iommu: Fix compliation failure caused by iommu_device_register vfio/iommu: Fix uncorrect type parameters which used in bitmap operations jiaqingtong (9): fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") fix d86d9f910d53 ,change iommu_pgsize's para previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") vfio_domain delete port member. Fixes: 71cfafda9c9b ("vfio: Move the Intel no-snoop control off of IOMMU_CACHE") iommu:Introduce dirty log tracking framework: previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") conflit with 9a630a4b,need move to iommu_domain_ops .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 2 + drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 268 +++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 17 +- drivers/iommu/io-pgtable-arm.c | 411 +++++++++++++++++- drivers/iommu/iommu.c | 188 +++++++- drivers/vfio/vfio_iommu_type1.c | 314 ++++++++++++- include/linux/io-pgtable.h | 23 + include/linux/iommu.h | 67 +++ include/trace/events/iommu.h | 63 +++ include/uapi/linux/vfio.h | 36 +- 10 files changed, 1365 insertions(+), 24 deletions(-) base-commit: c780cd23389087490b4199975c7e16cb696da852 -- 2.43.GIT

1 31

[PATCH OLK-5.10] drm/amdgpu: correct chunk_ptr to a pointer to chunk.
by Baogen Shang 10 Jan '24

10 Jan '24

From: YuanShang <YuanShang.Mao(a)amd.com> stable inclusion from stable-v5.10.205 commit 13b1fa5407949fb7ada3d2362c5099e18b2a25c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ] The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <YuanShang.Mao(a)amd.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index ffd8f5601e28..9e5eae1207e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -153,7 +153,7 @@ static int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, union drm_amdgpu_cs } for (i = 0; i < p->nchunks; i++) { - struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL; + struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL; struct drm_amdgpu_cs_chunk user_chunk; uint32_t __user *cdata; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Baogen Shang 10 Jan '24

10 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 001/124] x86/resctrl: Fix remaining kernel-doc warnings
by Zeng Heng 10 Jan '24

10 Jan '24

From: Maciej Wieczor-Retman <maciej.wieczor-retman(a)intel.com> mainline inclusion from mainline-v6.7-rc1 commit f05fd4ce99635975caa3e6a0eeb02118637f72a3 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8T2RT Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The kernel test robot reported kernel-doc warnings here: arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'of' not described in 'rdt_bit_usage_show' arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'seq' not described in 'rdt_bit_usage_show' arch/x86/kernel/cpu/resctrl/rdtgroup.c:915: warning: Function parameter or member 'v' not described in 'rdt_bit_usage_show' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1144: warning: Function parameter or member 'type' not described in '__rdtgroup_cbm_overlaps' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1224: warning: Function parameter or member 'rdtgrp' not described in 'rdtgroup_mode_test_exclusive' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'of' not described in 'rdtgroup_mode_write' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'buf' not described in 'rdtgroup_mode_write' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'nbytes' not described in 'rdtgroup_mode_write' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1261: warning: Function parameter or member 'off' not described in 'rdtgroup_mode_write' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'of' not described in 'rdtgroup_size_show' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 's' not described in 'rdtgroup_size_show' arch/x86/kernel/cpu/resctrl/rdtgroup.c:1370: warning: Function parameter or member 'v' not described in 'rdtgroup_size_show' The first two functions are missing an argument description while the other three are file callbacks and don't require a kernel-doc comment. Closes: https://lore.kernel.org/oe-kbuild-all/202310070434.mD8eRNAz-lkp@intel.com/ Reported-by: kernel test robot <lkp(a)intel.com> Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman(a)intel.com> Signed-off-by: Ingo Molnar <mingo(a)kernel.org> Cc: Peter Newman <peternewman(a)google.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: Reinette Chatre <reinette.chatre(a)intel.com> Link: https://lore.kernel.org/r/20231011064843.246592-1-maciej.wieczor-retman@int… Signed-off-by: Zeng Heng <zengheng4(a)huawei.com> --- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c index 725344048f85..a52cdf97c21c 100644 --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c @@ -895,7 +895,7 @@ static int rdt_shareable_bits_show(struct kernfs_open_file *of, return 0; } -/** +/* * rdt_bit_usage_show - Display current usage of resources * * A domain is a shared resource that can now be allocated differently. Here @@ -1123,6 +1123,7 @@ static enum resctrl_conf_type resctrl_peer_type(enum resctrl_conf_type my_type) * @d: The domain instance for which @closid is being tested. * @cbm: Capacity bitmask being tested. * @closid: Intended closid for @cbm. + * @type: CDP type of @r. * @exclusive: Only check if overlaps with exclusive resource groups * * Checks if provided @cbm intended to be used for @closid on domain @@ -1209,6 +1210,7 @@ bool rdtgroup_cbm_overlaps(struct resctrl_schema *s, struct rdt_domain *d, /** * rdtgroup_mode_test_exclusive - Test if this resource group can be exclusive + * @rdtgrp: Resource group identified through its closid. * * An exclusive resource group implies that there should be no sharing of * its allocated resources. At the time this group is considered to be @@ -1251,9 +1253,8 @@ static bool rdtgroup_mode_test_exclusive(struct rdtgroup *rdtgrp) return true; } -/** +/* * rdtgroup_mode_write - Modify the resource group's mode - * */ static ssize_t rdtgroup_mode_write(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off) @@ -1357,12 +1358,11 @@ unsigned int rdtgroup_cbm_to_size(struct rdt_resource *r, return size; } -/** +/* * rdtgroup_size_show - Display size in bytes of allocated regions * * The "size" file mirrors the layout of the "schemata" file, printing the * size in bytes of each region instead of the capacity bitmask. - * */ static int rdtgroup_size_show(struct kernfs_open_file *of, struct seq_file *s, void *v) -- 2.25.1

2 124

[PATCH OLK-6.6 00/31] SMMU HTTU sync from 5.10
by jiaqingtong 10 Jan '24

10 Jan '24

SMMU HTTU sync from 5.10 Jean-Philippe Brucker (1): iommu/arm-smmu-v3: Add support for Hardware Translation Table Update Keqian Zhu (3): iommu: Introduce dirty log tracking framework vfio/iommu_type1: Fix the logic of updating num_non_hwdbm_domains iommu: Stop tracking the dirty log status of iommu_domain Kunkun Jiang (18): iommu/io-pgtable-arm: Add quirk ARM_HD and ARM_BBMLx iommu/io-pgtable-arm: Fix attach device failed when smmuv3 supports HTTU iommu/io-pgtable-arm: Add and realize split_block ops iommu/io-pgtable-arm: Add and realize merge_page ops iommu/io-pgtable-arm: Add and realize sync_dirty_log ops iommu/io-pgtable-arm: Add and realize clear_dirty_log ops iommu/arm-smmu-v3: Add feature detection for BBML iommu/arm-smmu-v3: Realize switch_dirty_log iommu ops iommu/arm-smmu-v3: Realize sync_dirty_log iommu ops iommu/arm-smmu-v3: Realize clear_dirty_log iommu ops iommu/arm-smmu-v3: Realize support_dirty_log iommu ops vfio/iommu_type1: Add HWDBM status maintenance vfio/iommu_type1: Optimize dirty bitmap population based on iommu HWDBM vfio/iommu_type1: Add support for manual dirty log clear vfio/iommu_type1: replace kvmalloc with kvzalloc and kfree with kvfree iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping iommu: Fix compliation failure caused by iommu_device_register vfio/iommu: Fix uncorrect type parameters which used in bitmap operations jiaqingtong (9): fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") fix d86d9f910d53 ,change iommu_pgsize's para previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") vfio_domain delete port member. Fixes: 71cfafda9c9b ("vfio: Move the Intel no-snoop control off of IOMMU_CACHE") iommu:Introduce dirty log tracking framework: previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") conflit with 9a630a4b,need move to iommu_domain_ops .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 2 + drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 268 +++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 17 +- drivers/iommu/io-pgtable-arm.c | 411 +++++++++++++++++- drivers/iommu/iommu.c | 188 +++++++- drivers/vfio/vfio_iommu_type1.c | 314 ++++++++++++- include/linux/io-pgtable.h | 23 + include/linux/iommu.h | 67 +++ include/trace/events/iommu.h | 63 +++ include/uapi/linux/vfio.h | 36 +- 10 files changed, 1365 insertions(+), 24 deletions(-) base-commit: 5b44083b4ec0f955860c11bf6552d6769c5a7337 -- 2.43.GIT

1 31

[PATCH OLK-6.6 000/124] arm_mpam: support mpam feature in OLK-6.6 repo
by Zeng Heng 10 Jan '24

10 Jan '24

Amit Singh Tomar (1): fs/resctrl: Remove the limit on the number of CLOSID Babu Moger (9): x86/resctrl: Add multiple tasks to the resctrl group at once x86/resctrl: Simplify rftype flag definitions x86/resctrl: Rename rftype flags for consistency x86/resctrl: Unwind properly from rdt_enable_ctx() x86/resctrl: Move default group file creation to mount x86/resctrl: Introduce "-o debug" mount option x86/resctrl: Display CLOSID for resource group x86/resctrl: Add support for the files of MON groups only x86/resctrl: Display RMID of resource group Fenghua Yu (1): x86/resctrl: Add sparse_masks file in info James Morse (104): tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef x86/resctrl: kfree() rmid_ptrs from resctrl_exit() x86/resctrl: Create helper for RMID allocation and mondata dir creation x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare() x86/resctrl: Track the closid with the rmid x86/resctrl: Access per-rmid structures by index x86/resctrl: Allow RMID allocation to be scoped by CLOSID x86/resctrl: Track the number of dirty RMID a CLOSID has x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid x86/resctrl: Move CLOSID/RMID matching and setting to use helpers x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow x86/resctrl: Queue mon_event_read() instead of sending an IPI x86/resctrl: Allow resctrl_arch_rmid_read() to sleep x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read() x86/resctrl: Make resctrl_mounted checks explicit x86/resctrl: Move alloc/mon static keys into helpers x86/resctrl: Make rdt_enable_key the arch's decision to switch x86/resctrl: Add helpers for system wide mon/alloc capable x86/resctrl: Add CPU online callback for resctrl work x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but cpu x86/resctrl: Add CPU offline callback for resctrl work x86/resctrl: Move domain helper migration into resctrl_offline_cpu() x86/resctrl: Separate arch and fs resctrl locks x86/resctrl: Add a helper to avoid reaching into the arch code resource list x86/resctrl: Move ctrlval string parsing links away from the arch code x86/resctrl: Add helper for setting CPU default properties x86/resctrl: Remove rdtgroup from update_cpu_closid_rmid() x86/resctrl: Export resctrl fs's init function x86/resctrl: Wrap resctrl_arch_find_domain() around rdt_find_domain() x86/resctrl: Move resctrl types to a separate header x86/resctrl: Add a resctrl helper to reset all the resources x86/resctrl: Move monitor init work to a resctrl init call x86/resctrl: Move monitor exit work to a restrl exit call x86/resctrl: Move max_{name,data}_width into resctrl code x86/resctrl: Stop using the for_each_*_rdt_resource() walkers x86/resctrl: Export the is_mbm_*_enabled() helpers to asm/resctrl.h x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers x86/resctrl: Allow resctrl_arch_mon_event_config_write() to return an error x86/resctrl: Allow an architecture to disable pseudo lock x86/resctrl: Make prefetch_disable_bits belong to the arch code x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr x86/resctrl: Move thread_throttle_mode_init() to be managed by resctrl x86/resctrl: Move get_config_index() to a header x86/resctrl: Claim get_domain_from_cpu() for resctrl x86/resctrl: Describe resctrl's bitmap size assumptions x86/resctrl: Drop __init/__exit on assorted symbols fs/resctrl: Add boiler plate for external resctrl code x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl x86/resctrl: Move the filesystem portions of resctrl to live in '/fs/' arm64: head.S: Initialise MPAM EL2 registers and disable traps arm64: cpufeature: discover CPU support for MPAM KVM: arm64: Fix missing traps of guest accesses to the MPAM registers KVM: arm64: Disable MPAM visibility by default, and handle traps arm64: mpam: Context switch the MPAM registers untested: KVM: arm64: Force guest EL1 to use user-space's partid configuration ACPI / PPTT: Provide a helper to walk processor containers ACPI / PPTT: Find PPTT cache level by ID ACPI / PPTT: Add a helper to fill a cpumask from a processor container ACPI / PPTT: Add a helper to fill a cpumask from a cache_id cacheinfo: Expose the code to generate a cache-id from a device_node drivers: base: cacheinfo: Add helper to find the cache size from cpu+level ACPI / MPAM: Parse the MPAM table arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate arm_mpam: Add the class and component structures for ris firmware described arm_mpam: Add MPAM MSC register layout definitions arm_mpam: Add cpuhp callbacks to probe MSC hardware arm_mpam: Probe MSCs to find the supported partid/pmg values arm_mpam: Probe the hardware features resctrl supports arm_mpam: Merge supported features during mpam_enable() into mpam_class arm_mpam: Reset MSC controls from cpu hp callbacks arm_mpam: Add a helper to touch an MSC from any CPU arm_mpam: Extend reset logic to allow devices to be reset any time arm_mpam: Register and enable IRQs arm_mpam: Use the arch static key to indicate when mpam is enabled arm_mpam: Allow configuration to be applied and restored during cpu online arm_mpam: Probe and reset the rest of the features arm_mpam: Add helpers to allocate monitors arm_mpam: Add mpam_msmon_read() to read monitor value arm_mpam: Track bandwidth counter state for overflow and power management arm_mpam: Add helper to reset saved mbwu state arm_mpam: resctrl: Add boilerplate cpuhp and domain allocation arm_mpam: resctrl: Pick the caches we will use as resctrl resources arm_mpam: resctrl: Pick a value for num_rmid arm_mpam: resctrl: Implement resctrl_arch_reset_resources() arm_mpam: resctrl: Add resctrl_arch_get_config() arm_mpam: resctrl: Implement helpers to update configuration arm_mpam: resctrl: Add CDP emulation arm64: mpam: Add helpers to change a tasks and cpu mpam partid/pmg values arm_mpam: resctrl: Add rmid index helpers untested: arm_mpam: resctrl: Add support for MB resource untested: arm_mpam: resctrl: Add support for mbm counters arm_mpam: resctrl: Allow resctrl to allocate monitors arm_mpam: resctrl: Add resctrl_arch_rmid_read() and resctrl_arch_reset_rmid() untested: arm_mpam: resctrl: Allow monitors to be configured arm_mpam: resctrl: Add empty definitions for pseudo lock arm_mpam: resctrl: Add empty definitions for fine-grained enables arm_mpam: resctrl: Add dummy definition for free running counters arm64: mpam: Select ARCH_HAS_CPU_RESCTRL perf/arm-cmn: Stop claiming all the resources arm_mpam: resctrl: Tell resctrl about cpu/domain online/offline arm_mpam: resctrl: Call resctrl_exit() in the event of errors arm_mpam: resctrl: Update the rmid reallocation limit Maciej Wieczor-Retman (3): x86/resctrl: Fix remaining kernel-doc warnings x86/resctrl: Rename arch_has_sparse_bitmaps x86/resctrl: Enable non-contiguous CBMs in Intel CAT Rob Herring (3): cacheinfo: Allow for >32-bit cache 'id' cacheinfo: Set cache 'id' based on DT data dt-bindings: arm: Add MPAM MSC binding Rohit Mathew (2): arm_mpam: Probe for long/lwd mbwu counters arm_mpam: Use long MBWU counters if supported Zeng Heng (1): arm_mpam: control memory bandwidth with hard limit flag .../arch/arm64/cpu-feature-registers.rst | 2 + Documentation/arch/x86/resctrl.rst | 22 +- .../devicetree/bindings/arm/arm,mpam-msc.yaml | 227 + MAINTAINERS | 2 + arch/Kconfig | 8 + arch/arm64/Kconfig | 22 +- arch/arm64/include/asm/cpu.h | 1 + arch/arm64/include/asm/cpufeature.h | 13 + arch/arm64/include/asm/el2_setup.h | 16 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/mpam.h | 167 + arch/arm64/include/asm/resctrl.h | 1 + arch/arm64/include/asm/sysreg.h | 8 + arch/arm64/include/asm/thread_info.h | 3 + arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/cpufeature.c | 68 + arch/arm64/kernel/cpuinfo.c | 4 + arch/arm64/kernel/image-vars.h | 5 + arch/arm64/kernel/mpam.c | 23 + arch/arm64/kernel/process.c | 7 + arch/arm64/kvm/hyp/include/hyp/switch.h | 32 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 27 + arch/arm64/kvm/hyp/nvhe/switch.c | 11 + arch/arm64/kvm/hyp/vhe/sysreg-sr.c | 1 + arch/arm64/kvm/sys_regs.c | 70 +- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 33 + arch/x86/Kconfig | 5 +- arch/x86/include/asm/resctrl.h | 131 +- arch/x86/kernel/cpu/resctrl/core.c | 212 +- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 476 +- arch/x86/kernel/cpu/resctrl/internal.h | 394 +- arch/x86/kernel/cpu/resctrl/monitor.c | 594 +-- arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 1123 +---- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 3916 +--------------- drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 2 + drivers/acpi/arm64/mpam.c | 369 ++ drivers/acpi/pptt.c | 278 +- drivers/acpi/tables.c | 2 +- drivers/base/cacheinfo.c | 41 +- drivers/perf/arm-cmn.c | 12 +- drivers/platform/Kconfig | 2 + drivers/platform/Makefile | 1 + drivers/platform/mpam/Kconfig | 8 + drivers/platform/mpam/Makefile | 1 + drivers/platform/mpam/mpam_devices.c | 2422 ++++++++++ drivers/platform/mpam/mpam_internal.h | 576 +++ drivers/platform/mpam/mpam_resctrl.c | 1209 +++++ fs/Kconfig | 1 + fs/Makefile | 1 + fs/resctrl/Kconfig | 23 + fs/resctrl/Makefile | 1 + fs/resctrl/ctrlmondata.c | 528 +++ fs/resctrl/internal.h | 313 ++ fs/resctrl/monitor.c | 859 ++++ fs/resctrl/psuedo_lock.c | 1134 +++++ fs/resctrl/rdtgroup.c | 4015 +++++++++++++++++ include/linux/acpi.h | 17 + include/linux/arm_mpam.h | 105 + include/linux/cacheinfo.h | 30 +- include/linux/resctrl.h | 203 +- include/linux/resctrl_types.h | 98 + include/linux/tick.h | 9 +- 64 files changed, 13418 insertions(+), 6472 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,mpam-msc.yaml create mode 100644 arch/arm64/include/asm/mpam.h create mode 100644 arch/arm64/include/asm/resctrl.h create mode 100644 arch/arm64/kernel/mpam.c create mode 100644 drivers/acpi/arm64/mpam.c create mode 100644 drivers/platform/mpam/Kconfig create mode 100644 drivers/platform/mpam/Makefile create mode 100644 drivers/platform/mpam/mpam_devices.c create mode 100644 drivers/platform/mpam/mpam_internal.h create mode 100644 drivers/platform/mpam/mpam_resctrl.c create mode 100644 fs/resctrl/Kconfig create mode 100644 fs/resctrl/Makefile create mode 100644 fs/resctrl/ctrlmondata.c create mode 100644 fs/resctrl/internal.h create mode 100644 fs/resctrl/monitor.c create mode 100644 fs/resctrl/psuedo_lock.c create mode 100644 fs/resctrl/rdtgroup.c create mode 100644 include/linux/arm_mpam.h create mode 100644 include/linux/resctrl_types.h -- 2.25.1

1 124

[PATCH OLK-6.6 000/124] arm_mpam: support mpam feature in OLK-6.6 repo
by Zeng Heng 10 Jan '24

10 Jan '24

Amit Singh Tomar (1): fs/resctrl: Remove the limit on the number of CLOSID Babu Moger (9): x86/resctrl: Add multiple tasks to the resctrl group at once x86/resctrl: Simplify rftype flag definitions x86/resctrl: Rename rftype flags for consistency x86/resctrl: Unwind properly from rdt_enable_ctx() x86/resctrl: Move default group file creation to mount x86/resctrl: Introduce "-o debug" mount option x86/resctrl: Display CLOSID for resource group x86/resctrl: Add support for the files of MON groups only x86/resctrl: Display RMID of resource group Fenghua Yu (1): x86/resctrl: Add sparse_masks file in info James Morse (104): tick/nohz: Move tick_nohz_full_mask declaration outside the #ifdef x86/resctrl: kfree() rmid_ptrs from resctrl_exit() x86/resctrl: Create helper for RMID allocation and mondata dir creation x86/resctrl: Move rmid allocation out of mkdir_rdt_prepare() x86/resctrl: Track the closid with the rmid x86/resctrl: Access per-rmid structures by index x86/resctrl: Allow RMID allocation to be scoped by CLOSID x86/resctrl: Track the number of dirty RMID a CLOSID has x86/resctrl: Use __set_bit()/__clear_bit() instead of open coding x86/resctrl: Allocate the cleanest CLOSID by searching closid_num_dirty_rmid x86/resctrl: Move CLOSID/RMID matching and setting to use helpers x86/resctrl: Add cpumask_any_housekeeping() for limbo/overflow x86/resctrl: Queue mon_event_read() instead of sending an IPI x86/resctrl: Allow resctrl_arch_rmid_read() to sleep x86/resctrl: Allow arch to allocate memory needed in resctrl_arch_rmid_read() x86/resctrl: Make resctrl_mounted checks explicit x86/resctrl: Move alloc/mon static keys into helpers x86/resctrl: Make rdt_enable_key the arch's decision to switch x86/resctrl: Add helpers for system wide mon/alloc capable x86/resctrl: Add CPU online callback for resctrl work x86/resctrl: Allow overflow/limbo handlers to be scheduled on any-but cpu x86/resctrl: Add CPU offline callback for resctrl work x86/resctrl: Move domain helper migration into resctrl_offline_cpu() x86/resctrl: Separate arch and fs resctrl locks x86/resctrl: Add a helper to avoid reaching into the arch code resource list x86/resctrl: Move ctrlval string parsing links away from the arch code x86/resctrl: Add helper for setting CPU default properties x86/resctrl: Remove rdtgroup from update_cpu_closid_rmid() x86/resctrl: Export resctrl fs's init function x86/resctrl: Wrap resctrl_arch_find_domain() around rdt_find_domain() x86/resctrl: Move resctrl types to a separate header x86/resctrl: Add a resctrl helper to reset all the resources x86/resctrl: Move monitor init work to a resctrl init call x86/resctrl: Move monitor exit work to a restrl exit call x86/resctrl: Move max_{name,data}_width into resctrl code x86/resctrl: Stop using the for_each_*_rdt_resource() walkers x86/resctrl: Export the is_mbm_*_enabled() helpers to asm/resctrl.h x86/resctrl: Add resctrl_arch_is_evt_configurable() to abstract BMEC x86/resctrl: Change mon_event_config_{read,write}() to be arch helpers x86/resctrl: Allow resctrl_arch_mon_event_config_write() to return an error x86/resctrl: Allow an architecture to disable pseudo lock x86/resctrl: Make prefetch_disable_bits belong to the arch code x86/resctrl: Make resctrl_arch_pseudo_lock_fn() take a plr x86/resctrl: Move thread_throttle_mode_init() to be managed by resctrl x86/resctrl: Move get_config_index() to a header x86/resctrl: Claim get_domain_from_cpu() for resctrl x86/resctrl: Describe resctrl's bitmap size assumptions x86/resctrl: Drop __init/__exit on assorted symbols fs/resctrl: Add boiler plate for external resctrl code x86/resctrl: Move the filesystem bits to headers visible to fs/resctrl x86/resctrl: Move the filesystem portions of resctrl to live in '/fs/' arm64: head.S: Initialise MPAM EL2 registers and disable traps arm64: cpufeature: discover CPU support for MPAM KVM: arm64: Fix missing traps of guest accesses to the MPAM registers KVM: arm64: Disable MPAM visibility by default, and handle traps arm64: mpam: Context switch the MPAM registers untested: KVM: arm64: Force guest EL1 to use user-space's partid configuration ACPI / PPTT: Provide a helper to walk processor containers ACPI / PPTT: Find PPTT cache level by ID ACPI / PPTT: Add a helper to fill a cpumask from a processor container ACPI / PPTT: Add a helper to fill a cpumask from a cache_id cacheinfo: Expose the code to generate a cache-id from a device_node drivers: base: cacheinfo: Add helper to find the cache size from cpu+level ACPI / MPAM: Parse the MPAM table arm_mpam: Add probe/remove for mpam msc driver and kbuild boiler plate arm_mpam: Add the class and component structures for ris firmware described arm_mpam: Add MPAM MSC register layout definitions arm_mpam: Add cpuhp callbacks to probe MSC hardware arm_mpam: Probe MSCs to find the supported partid/pmg values arm_mpam: Probe the hardware features resctrl supports arm_mpam: Merge supported features during mpam_enable() into mpam_class arm_mpam: Reset MSC controls from cpu hp callbacks arm_mpam: Add a helper to touch an MSC from any CPU arm_mpam: Extend reset logic to allow devices to be reset any time arm_mpam: Register and enable IRQs arm_mpam: Use the arch static key to indicate when mpam is enabled arm_mpam: Allow configuration to be applied and restored during cpu online arm_mpam: Probe and reset the rest of the features arm_mpam: Add helpers to allocate monitors arm_mpam: Add mpam_msmon_read() to read monitor value arm_mpam: Track bandwidth counter state for overflow and power management arm_mpam: Add helper to reset saved mbwu state arm_mpam: resctrl: Add boilerplate cpuhp and domain allocation arm_mpam: resctrl: Pick the caches we will use as resctrl resources arm_mpam: resctrl: Pick a value for num_rmid arm_mpam: resctrl: Implement resctrl_arch_reset_resources() arm_mpam: resctrl: Add resctrl_arch_get_config() arm_mpam: resctrl: Implement helpers to update configuration arm_mpam: resctrl: Add CDP emulation arm64: mpam: Add helpers to change a tasks and cpu mpam partid/pmg values arm_mpam: resctrl: Add rmid index helpers untested: arm_mpam: resctrl: Add support for MB resource untested: arm_mpam: resctrl: Add support for mbm counters arm_mpam: resctrl: Allow resctrl to allocate monitors arm_mpam: resctrl: Add resctrl_arch_rmid_read() and resctrl_arch_reset_rmid() untested: arm_mpam: resctrl: Allow monitors to be configured arm_mpam: resctrl: Add empty definitions for pseudo lock arm_mpam: resctrl: Add empty definitions for fine-grained enables arm_mpam: resctrl: Add dummy definition for free running counters arm64: mpam: Select ARCH_HAS_CPU_RESCTRL perf/arm-cmn: Stop claiming all the resources arm_mpam: resctrl: Tell resctrl about cpu/domain online/offline arm_mpam: resctrl: Call resctrl_exit() in the event of errors arm_mpam: resctrl: Update the rmid reallocation limit Maciej Wieczor-Retman (3): x86/resctrl: Fix remaining kernel-doc warnings x86/resctrl: Rename arch_has_sparse_bitmaps x86/resctrl: Enable non-contiguous CBMs in Intel CAT Rob Herring (3): cacheinfo: Allow for >32-bit cache 'id' cacheinfo: Set cache 'id' based on DT data dt-bindings: arm: Add MPAM MSC binding Rohit Mathew (2): arm_mpam: Probe for long/lwd mbwu counters arm_mpam: Use long MBWU counters if supported Zeng Heng (1): arm_mpam: control memory bandwidth with hard limit flag .../arch/arm64/cpu-feature-registers.rst | 2 + Documentation/arch/x86/resctrl.rst | 22 +- .../devicetree/bindings/arm/arm,mpam-msc.yaml | 227 + MAINTAINERS | 2 + arch/Kconfig | 8 + arch/arm64/Kconfig | 22 +- arch/arm64/include/asm/cpu.h | 1 + arch/arm64/include/asm/cpufeature.h | 13 + arch/arm64/include/asm/el2_setup.h | 16 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/mpam.h | 167 + arch/arm64/include/asm/resctrl.h | 1 + arch/arm64/include/asm/sysreg.h | 8 + arch/arm64/include/asm/thread_info.h | 3 + arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/cpufeature.c | 68 + arch/arm64/kernel/cpuinfo.c | 4 + arch/arm64/kernel/image-vars.h | 5 + arch/arm64/kernel/mpam.c | 23 + arch/arm64/kernel/process.c | 7 + arch/arm64/kvm/hyp/include/hyp/switch.h | 32 + arch/arm64/kvm/hyp/include/hyp/sysreg-sr.h | 27 + arch/arm64/kvm/hyp/nvhe/switch.c | 11 + arch/arm64/kvm/hyp/vhe/sysreg-sr.c | 1 + arch/arm64/kvm/sys_regs.c | 70 +- arch/arm64/tools/cpucaps | 1 + arch/arm64/tools/sysreg | 33 + arch/x86/Kconfig | 5 +- arch/x86/include/asm/resctrl.h | 131 +- arch/x86/kernel/cpu/resctrl/core.c | 212 +- arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 476 +- arch/x86/kernel/cpu/resctrl/internal.h | 394 +- arch/x86/kernel/cpu/resctrl/monitor.c | 594 +-- arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 1123 +---- arch/x86/kernel/cpu/resctrl/rdtgroup.c | 3916 +--------------- drivers/acpi/arm64/Kconfig | 3 + drivers/acpi/arm64/Makefile | 2 + drivers/acpi/arm64/mpam.c | 369 ++ drivers/acpi/pptt.c | 278 +- drivers/acpi/tables.c | 2 +- drivers/base/cacheinfo.c | 41 +- drivers/perf/arm-cmn.c | 12 +- drivers/platform/Kconfig | 2 + drivers/platform/Makefile | 1 + drivers/platform/mpam/Kconfig | 8 + drivers/platform/mpam/Makefile | 1 + drivers/platform/mpam/mpam_devices.c | 2422 ++++++++++ drivers/platform/mpam/mpam_internal.h | 576 +++ drivers/platform/mpam/mpam_resctrl.c | 1209 +++++ fs/Kconfig | 1 + fs/Makefile | 1 + fs/resctrl/Kconfig | 23 + fs/resctrl/Makefile | 1 + fs/resctrl/ctrlmondata.c | 528 +++ fs/resctrl/internal.h | 313 ++ fs/resctrl/monitor.c | 859 ++++ fs/resctrl/psuedo_lock.c | 1134 +++++ fs/resctrl/rdtgroup.c | 4015 +++++++++++++++++ include/linux/acpi.h | 17 + include/linux/arm_mpam.h | 105 + include/linux/cacheinfo.h | 30 +- include/linux/resctrl.h | 203 +- include/linux/resctrl_types.h | 98 + include/linux/tick.h | 9 +- 64 files changed, 13418 insertions(+), 6472 deletions(-) create mode 100644 Documentation/devicetree/bindings/arm/arm,mpam-msc.yaml create mode 100644 arch/arm64/include/asm/mpam.h create mode 100644 arch/arm64/include/asm/resctrl.h create mode 100644 arch/arm64/kernel/mpam.c create mode 100644 drivers/acpi/arm64/mpam.c create mode 100644 drivers/platform/mpam/Kconfig create mode 100644 drivers/platform/mpam/Makefile create mode 100644 drivers/platform/mpam/mpam_devices.c create mode 100644 drivers/platform/mpam/mpam_internal.h create mode 100644 drivers/platform/mpam/mpam_resctrl.c create mode 100644 fs/resctrl/Kconfig create mode 100644 fs/resctrl/Makefile create mode 100644 fs/resctrl/ctrlmondata.c create mode 100644 fs/resctrl/internal.h create mode 100644 fs/resctrl/monitor.c create mode 100644 fs/resctrl/psuedo_lock.c create mode 100644 fs/resctrl/rdtgroup.c create mode 100644 include/linux/arm_mpam.h create mode 100644 include/linux/resctrl_types.h -- 2.25.1

1 0

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

2 4

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

2 4

[PATCH OLK-6.6 0/3] backport OLK-5.10 pci sub-system patches to OLK-6.6
by Jiangtian Feng 10 Jan '24

10 Jan '24

*** BLURB HERE *** Jiangtian Feng (3): Author: geruijun <geruijun(a)huawei.com> Date: Mon Dec 27 19:43:22 2021 +0800 Author: Bo Wu <wubo40(a)huawei.com> Date: Mon Dec 27 19:43:24 2021 +0800 Author: Ruijun Ge <geruijun(a)huawei.com> Date: Mon Dec 27 19:43:25 2021 +0800 drivers/pci/quirks.c | 27 +++++++++++++++++++++++++++ include/linux/pci_ids.h | 3 +++ 2 files changed, 30 insertions(+) -- 2.33.0

2 4

[PATCH OLK-6.6 00/31] SMMU HTTU sync from 5.10
by jiaqingtong 10 Jan '24

10 Jan '24

SMMU HTTU sync from 5.10 Jean-Philippe Brucker (1): iommu/arm-smmu-v3: Add support for Hardware Translation Table Update Keqian Zhu (3): iommu: Introduce dirty log tracking framework vfio/iommu_type1: Fix the logic of updating num_non_hwdbm_domains iommu: Stop tracking the dirty log status of iommu_domain Kunkun Jiang (18): iommu/io-pgtable-arm: Add quirk ARM_HD and ARM_BBMLx iommu/io-pgtable-arm: Fix attach device failed when smmuv3 supports HTTU iommu/io-pgtable-arm: Add and realize split_block ops iommu/io-pgtable-arm: Add and realize merge_page ops iommu/io-pgtable-arm: Add and realize sync_dirty_log ops iommu/io-pgtable-arm: Add and realize clear_dirty_log ops iommu/arm-smmu-v3: Add feature detection for BBML iommu/arm-smmu-v3: Realize switch_dirty_log iommu ops iommu/arm-smmu-v3: Realize sync_dirty_log iommu ops iommu/arm-smmu-v3: Realize clear_dirty_log iommu ops iommu/arm-smmu-v3: Realize support_dirty_log iommu ops vfio/iommu_type1: Add HWDBM status maintenance vfio/iommu_type1: Optimize dirty bitmap population based on iommu HWDBM vfio/iommu_type1: Add support for manual dirty log clear vfio/iommu_type1: replace kvmalloc with kvzalloc and kfree with kvfree iommu/arm-smmu-v3: Enable HTTU for stage1 with io-pgtable mapping iommu: Fix compliation failure caused by iommu_device_register vfio/iommu: Fix uncorrect type parameters which used in bitmap operations jiaqingtong (9): fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") fix conflit with 41e1eb2546e9c8200d32f11e4b47d86d156a5a97("iommu/io-pgtable-arm: Prepare PTE methods for handling multiple entries") previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") fix d86d9f910d53 ,change iommu_pgsize's para previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") vfio_domain delete port member. Fixes: 71cfafda9c9b ("vfio: Move the Intel no-snoop control off of IOMMU_CACHE") iommu:Introduce dirty log tracking framework: conflit with 9abe2ac834851a7d0b0756e295cf7a292c45ca53 change to arm_lpae_install_table to accept arm_lpae_iopte previes commits delete __arm_lpae_set_pte, add it back. Fixes: 1fe27be5ffec ("iommu/io-pgtable-arm: Implement arm_lpae_unmap_pages()") conflit with 9a630a4b,need move to iommu_domain_ops conflit with ec288a2c, change func .../iommu/arm/arm-smmu-v3/arm-smmu-v3-sva.c | 2 + drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c | 268 +++++++++++- drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.h | 17 +- drivers/iommu/io-pgtable-arm.c | 411 +++++++++++++++++- drivers/iommu/iommu.c | 188 +++++++- drivers/vfio/vfio_iommu_type1.c | 314 ++++++++++++- include/linux/io-pgtable.h | 23 + include/linux/iommu.h | 67 +++ include/trace/events/iommu.h | 63 +++ include/uapi/linux/vfio.h | 36 +- 10 files changed, 1365 insertions(+), 24 deletions(-) base-commit: f898c7c8c095242ad10bfff5c1f8c52c64488f96 -- 2.43.GIT

1 31

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

2 4

[PATCH OLK-6.6 v8 0/6] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 10 Jan '24

10 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP; 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. v7->v8: 1) Add detection of mounting part0 while partitions write opened; 2) Add detection of writing partitions while part0 mounted; 3) Add config in openeuler_defconfig. Li Lingfeng (6): block: Count writers and mounters regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted add config about writing mounted devices in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + block/Kconfig | 17 ++++ block/bdev.c | 122 +++++++++++++++++++++---- include/linux/blk_types.h | 1 + 5 files changed, 129 insertions(+), 17 deletions(-) -- 2.31.1

2 7

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 10 Jan '24

10 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/pid.h | 2 + include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 +++ kernel/pid.c | 54 +++++++++++++++++++++++++- kernel/pid_namespace.c | 13 +++++++ kernel/sysctl.c | 2 + kernel/trace/pid_list.c | 4 ++ kernel/trace/trace.c | 4 ++ kernel/trace/trace.h | 2 + 11 files changed, 90 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..a040a64a8350 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -999,6 +999,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..e5dd6035346e 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1015,6 +1015,7 @@ CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..d52550d35427 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default n + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..db99713600fc 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -59,12 +59,16 @@ struct pid init_struct_pid = { }, } }; -int pid_max = PID_MAX_DEFAULT; - #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE +int pid_max = PID_MAX_DEFAULT; int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +84,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +201,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +245,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +661,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +702,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +712,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS] livepatch/core: Disable support for replacing
by Zheng Yejian 10 Jan '24

10 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8ORHJ -------------------------------- Replacing is an optimization for livepatching based on ftrace, the wo_ftrace solution do not support it. Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- kernel/livepatch/core.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/kernel/livepatch/core.c b/kernel/livepatch/core.c index 40259a2988e9..cc7e140088df 100644 --- a/kernel/livepatch/core.c +++ b/kernel/livepatch/core.c @@ -1155,6 +1155,9 @@ static void klp_init_func_early(struct klp_object *obj, kobject_init(&func->kobj, &klp_ktype_func); list_add_tail(&func->node, &obj->func_list); func->func_node = NULL; +#ifdef CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY + func->nop = false; +#endif } static void klp_init_object_early(struct klp_patch *patch, @@ -1165,6 +1168,7 @@ static void klp_init_object_early(struct klp_patch *patch, list_add_tail(&obj->node, &patch->obj_list); #ifdef CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY obj->mod = NULL; + obj->dynamic = false; #endif } @@ -1199,6 +1203,12 @@ static int klp_init_patch(struct klp_patch *patch) if (ret) return ret; +#ifdef CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY + if (patch->replace) { + pr_err("Replacing is not supported\n"); + return -EINVAL; + } +#endif if (patch->replace) { ret = klp_add_nops(patch); if (ret) -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS v2] net: bridge: multicast: fix UAF of net_bridge
by Ziyang Xuan 10 Jan '24

10 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UZTK CVE: NA -------------------------------- Get a UAF problem as following: ======================================================== BUG: KASAN: use-after-free in run_timer_softirq+0x526/0x750 ... Call Trace: <IRQ> dump_stack+0x8b/0xbb print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ? run_timer_softirq+0x526/0x750 run_timer_softirq+0x526/0x750 ? pvclock_clocksource_read+0xd1/0x180 ? init_timer_key+0xc0/0xc0 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x100 __do_softirq+0x119/0x3a2 irq_exit+0x153/0x160 smp_apic_timer_interrupt+0x92/0x1a0 apic_timer_interrupt+0xf/0x20 ... Allocated by task 11277: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x190/0x2b0 kvmalloc_node+0x43/0x70 alloc_netdev_mqs+0x6a/0x660 rtnl_create_link+0x12a/0x420 rtnl_newlink+0x832/0xab0 rtnetlink_rcv_msg+0x424/0x500 netlink_rcv_skb+0xcd/0x200 netlink_unicast+0x2e9/0x3a0 netlink_sendmsg+0x4d7/0x670 sock_sendmsg+0x6d/0x80 ____sys_sendmsg+0x36a/0x3d0 ___sys_sendmsg+0x10a/0x190 __sys_sendmsg+0xd2/0x150 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Freed by task 11313: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 device_release+0x47/0xe0 kobject_release+0x98/0x200 netdev_run_todo+0x36d/0x490 rtnetlink_rcv_msg+0x42c/0x500 netlink_rcv_skb+0xcd/0x200 netlink_unicast+0x2e9/0x3a0 netlink_sendmsg+0x4d7/0x670 sock_sendmsg+0x6d/0x80 ____sys_sendmsg+0x36a/0x3d0 ___sys_sendmsg+0x10a/0x190 __sys_sendmsg+0xd2/0x150 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Under closed state of bridge netdev, try to activate ip6_own_query.timer of bridge netdev by br_multicast_set_querier(), and delete bridge netdev immediately afterwards. Because the timer will not be deleted during bridge netdev deleting process. When the timer is not activated before bridge netdev is released, UAF will be triggered to access the timer in run_timer_softirq(). Add br_multicast_stop() in br_multicast_dev_del() to delete the timer during bridge netdev deleting process as done in commit 613d61dbef8e ("net: bridge: vlan: add global and per-port multicast context"). Fixes: cc0fdd802859 ("bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones") Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> -- v2: - Remove "Offering" item. --- net/bridge/br_multicast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 1dc32cbd20bb..d84abee1d24c 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -2068,6 +2068,7 @@ void br_multicast_dev_del(struct net_bridge *br) out: spin_unlock_bh(&br->multicast_lock); + br_multicast_stop(br); } int br_multicast_set_router(struct net_bridge *br, unsigned long val) -- 2.25.1

2 1

[PATCH OLK-6.6 v2 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

1 3

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 10 Jan '24

10 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Pavel Emelyanov <xemul(a)parallels.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 3 --- include/linux/pid_namespace.h | 1 + kernel/pid.c | 42 ++++++++++++++++++++++++++++++----- kernel/pid_namespace.c | 6 +++-- kernel/sysctl.c | 9 -------- kernel/trace/pid_list.c | 2 +- kernel/trace/trace.c | 2 +- kernel/trace/trace.h | 2 -- 8 files changed, 43 insertions(+), 24 deletions(-) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..7f0f84a368b7 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,9 +113,6 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; -extern int pid_max; -extern int pid_max_min, pid_max_max; - /* * look up a PID in the hash table. Must be called with the tasklist_lock * or rcu_read_lock() held. diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..338012f75f6a 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,7 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; + int pid_max; int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..1cf72619d922 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -43,6 +43,7 @@ #include <linux/sched/task.h> #include <linux/idr.h> #include <net/sock.h> +#include <linux/kmemleak.h> #include <uapi/linux/pidfd.h> struct pid init_struct_pid = { @@ -59,12 +60,10 @@ struct pid init_struct_pid = { }, } }; -int pid_max = PID_MAX_DEFAULT; - #define RESERVED_PIDS 300 -int pid_max_min = RESERVED_PIDS + 1; -int pid_max_max = PID_MAX_LIMIT; +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +79,7 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, + .pid_max = PID_MAX_DEFAULT, #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +194,7 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; - if (tid < 1 || tid >= pid_max) + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +234,7 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, - pid_max, GFP_ATOMIC); + tmp->pid_max, GFP_ATOMIC); } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +646,34 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; + void __init pid_idr_init(void) { + int pid_max = init_pid_ns.pid_max; + /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +684,8 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); + init_pid_ns.pid_max = pid_max; + idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +693,8 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); + + register_sysctl_init("kernel", pid_ctl_table); } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..f66e4f866472 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,7 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; + ns->pid_max = parent_pid_ns->pid_max; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +296,8 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; + tmp.extra2 = &pid_ns->pid_max; + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +305,6 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } -extern int pid_max; static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +312,7 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, - .extra2 = &pid_max, + .extra2 = &init_pid_ns.pid_max, }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..b000e733281e 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,15 +1809,6 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif - { - .procname = "pid_max", - .data = &pid_max, - .maxlen = sizeof (int), - .mode = 0644, - .proc_handler = proc_dointvec_minmax, - .extra1 = &pid_max_min, - .extra2 = &pid_max_max, - }, { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..2ff4259928ae 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,7 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ - WARN_ON_ONCE(pid_max > (1 << 30)); + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index a40d6baf101f..2fac76f2a865 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5466,7 +5466,7 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { - tgid_map_max = pid_max; + tgid_map_max = init_pid_ns.pid_max; map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..6077db8894fd 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,8 +695,6 @@ extern unsigned long tracing_thresh; /* PID filtering */ -extern int pid_max; - bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); bool trace_ignore_this_task(struct trace_pid_list *filtered_pids, -- 2.25.1

2 1

[PATCH v2 OLK-6.6 00/19] mm: mem_reliable: Introduce memory reliable
by Wupeng Ma 10 Jan '24

10 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Introduction ============ Memory reliable feature is a memory tiering mechanism. It is based on kernel mirror feature, which splits memory into two separate regions, mirrored(reliable) region and non-mirrored (non-reliable) region. for kernel mirror feature: - allocate kernel memory from mirrored region by default - allocate user memory from non-mirrored region by default non-mirrored region will be arranged into ZONE_MOVABLE. for kernel reliable feature, it has additional features below: - normal user tasks never alloc memory from mirrored region with userspace apis(malloc, mmap, etc.) - special user tasks will allocate memory from mirrored region by default - shmem/pagecache allocate memory from mirrored region by default - upper limit of mirrored region allcated for user tasks, shmem and page cache Support Reliable fallback mechanism which allows special user tasks, shmem and page cache can fallback to alloc non-mirrored region, it's the default setting. In order to fulfil the goal - GFP_KERNEL flag added for task to alloc memory from mirrored region. - the high_zoneidx for special user tasks/shmem/pagecache is set to ZONE_NORMAL to alloc memory from mirrored region. - normal user tasks can only alloc memory from ZONE_MOVABLE. Changelog since v1: - update bugzilla url. Chen Wandun (1): mm: mem_reliable: Alloc pagecache from reliable region Ma Wupeng (16): proc: introduce proc_hide_ents to hide proc files efi: Disable mirror feature during crashkernel mm: mem_reliable: Introduce memory reliable mm: mem_reliable: Alloc task memory from reliable region mm: mem_reliable: Add memory reliable support during hugepaged collapse mm/memblock: Introduce ability to alloc memory from specify memory region mm/hugetlb: Allocate non-mirrored memory by default mm: mem_reliable: Count reliable page cache usage mm: mem_reliable: Count reliable shmem usage mm: mem_reliable: Show reliable meminfo mm: mem_reliable: Add limiting the usage of reliable memory mm: mem_reliable: Introduce fallback mechanism for memory reliable proc: mem_reliable: Count reliable memory usage of reliable tasks mm: mem_reliable: Introduce proc interface to disable memory reliable features mm: mem_reliable: Show debug info about memory reliable if oom occurs config: enable MEMORY_RELIABLE by default Peng Wu (1): mm: mem_reliable: Add cmdline reliable_debug to enable separate feature Zhou Guanghui (1): shmem: mem_reliable: Alloc shmem from reliable region .../admin-guide/kernel-parameters.txt | 15 +- Documentation/filesystems/proc.rst | 30 ++ arch/arm64/configs/openeuler_defconfig | 1 + fs/proc/Makefile | 1 + fs/proc/base.c | 21 +- fs/proc/mem_reliable.c | 100 ++++ fs/proc/meminfo.c | 2 + fs/proc/task_mmu.c | 1 + include/linux/gfp.h | 6 + include/linux/gfp_types.h | 10 +- include/linux/mem_reliable.h | 261 ++++++++++ include/linux/memblock.h | 6 + include/linux/mm.h | 3 + include/linux/mm_inline.h | 6 + include/linux/mm_types.h | 4 + include/linux/mmzone.h | 5 + include/linux/sched.h | 5 + include/trace/events/mmflags.h | 3 +- kernel/events/uprobes.c | 2 + mm/Kconfig | 17 + mm/Makefile | 1 + mm/filemap.c | 11 +- mm/huge_memory.c | 4 + mm/hugetlb.c | 18 +- mm/khugepaged.c | 18 + mm/ksm.c | 2 + mm/mem_reliable.c | 473 ++++++++++++++++++ mm/memblock.c | 92 +++- mm/memory.c | 10 + mm/migrate.c | 5 + mm/migrate_device.c | 1 + mm/mm_init.c | 34 +- mm/page_alloc.c | 175 ++++++- mm/rmap.c | 7 + mm/shmem.c | 11 + mm/show_mem.c | 1 + mm/swapfile.c | 1 + mm/userswap.c | 4 + mm/vmscan.c | 2 + tools/perf/builtin-kmem.c | 1 + 40 files changed, 1342 insertions(+), 28 deletions(-) create mode 100644 fs/proc/mem_reliable.c create mode 100644 include/linux/mem_reliable.h create mode 100644 mm/mem_reliable.c -- 2.25.1

2 20

[PATCH OLK-6.6 0/2] *** SUBJECT HERE ***
by lishusen 10 Jan '24

10 Jan '24

*** BLURB HERE *** Jingyi Wang (1): KVM: arm64: Make use of TWED feature Zengruan Ye (1): arm64: cpufeature: TWED support detection arch/arm64/Kconfig | 10 ++++++++++ arch/arm64/include/asm/kvm_arm.h | 8 ++++++++ arch/arm64/include/asm/kvm_emulate.h | 27 +++++++++++++++++++++++++++ arch/arm64/include/asm/kvm_host.h | 8 ++++++++ arch/arm64/include/asm/virt.h | 5 +++++ arch/arm64/kernel/cpufeature.c | 12 ++++++++++++ arch/arm64/kvm/arm.c | 15 +++++++++++++++ arch/arm64/tools/cpucaps | 1 + 8 files changed, 86 insertions(+) -- 2.33.0

2 3

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 10 Jan '24

10 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/pid.h | 2 + include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 +++ kernel/pid.c | 53 ++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 +++++++ kernel/sysctl.c | 2 + kernel/trace/pid_list.c | 4 ++ kernel/trace/trace.c | 4 ++ kernel/trace/trace.h | 2 + 11 files changed, 91 insertions(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..a040a64a8350 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -999,6 +999,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..e5dd6035346e 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1015,6 +1015,7 @@ CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..d52550d35427 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default n + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..b6791a8a211d 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -59,12 +59,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +87,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +204,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +248,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +664,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +705,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +715,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH OLK-6.6 1/2] arm64: cpufeature: TWED support detection
by lishusen 10 Jan '24

10 Jan '24

From: Zengruan Ye <yezengruan(a)huawei.com> virt inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8TN8N CVE: NA ----------------------------- TWE Delay is an optional feature in ARMv8.6 Extensions. This patch detect this feature. Signed-off-by: Zengruan Ye <yezengruan(a)huawei.com> Signed-off-by: Jingyi Wang <wangjingyi11(a)huawei.com> Reviewed-by: Keqian Zhu <zhukeqian1(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: lishusen <lishusen2(a)huawei.com> --- arch/arm64/Kconfig | 10 ++++++++++ arch/arm64/kernel/cpufeature.c | 12 ++++++++++++ arch/arm64/tools/cpucaps | 1 + 3 files changed, 23 insertions(+) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index d1705fdc046a..9db5bd439a29 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -2175,6 +2175,16 @@ config ARM64_EPAN if the cpu does not implement the feature. endmenu # "ARMv8.7 architectural features" +menu "ARMv8.6 architectural features" + +config ARM64_TWED + bool "Enable support for delayed trapping of WFE" + default y + help + Delayed Trapping of WFE (part of the ARMv8.6 Extensions) + +endmenu + config ARM64_SVE bool "ARM Scalable Vector Extension support" default y diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 455e72ce080a..9169d622805d 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -2722,6 +2722,18 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .matches = has_cpuid_feature, ARM64_CPUID_FIELDS(ID_AA64MMFR2_EL1, EVT, IMP) }, +#ifdef CONFIG_ARM64_TWED + { + .desc = "Delayed Trapping of WFE", + .capability = ARM64_HAS_TWED, + .type = ARM64_CPUCAP_SYSTEM_FEATURE, + .matches = has_cpuid_feature, + .sys_reg = SYS_ID_AA64MMFR1_EL1, + .field_pos = ID_AA64MMFR1_EL1_TWED_SHIFT, + .sign = FTR_UNSIGNED, + .min_field_value = 1, + }, +#endif {}, }; diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps index 569ecec76c16..fea9f598f4ef 100644 --- a/arch/arm64/tools/cpucaps +++ b/arch/arm64/tools/cpucaps @@ -52,6 +52,7 @@ HAS_TIDCP1 HAS_TLB_RANGE HAS_VIRT_HOST_EXTN HAS_WFXT +HAS_TWED HW_DBM KVM_HVHE KVM_PROTECTED_MODE -- 2.33.0

2 2

[PATCH OLK-5.10] cgroup-v1: Delete usued fucntion in proc_cgroupstats_show
by Lu Jialin 10 Jan '24

10 Jan '24

hulk inclusion category: cleanup bugzilla: https://gitee.com/openeuler/kernel/issues/I8V1ZT -------------------------------- for_each_subsys(ss, i) is unused in proc_cgroupstats_show after commit(8f1f7f473d69f"cgroup: check if cgroup root is alive in cgroupstats_show()"). Therefore, just delete it. --- kernel/cgroup/cgroup-v1.c | 1 - 1 file changed, 1 deletion(-) diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index b913923497e9..59d5850d20df 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -683,7 +683,6 @@ int proc_cgroupstats_show(struct seq_file *m, void *v) */ mutex_lock(&cgroup_mutex); - for_each_subsys(ss, i) for_each_subsys(ss, i) { dead = percpu_ref_is_dying(&ss->root->cgrp.self.refcnt); seq_printf(m, "%s\t%d\t%d\t%d\n", -- 2.34.1

2 1

[PATCH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 depent on GICv4,test on 6.6 mainline with NIC PCI passthrough Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

2 4

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 10 Jan '24

10 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 37 +++++++++++++++--- include/linux/pid.h | 2 + include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 +++ kernel/pid.c | 53 ++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 +++++++ kernel/sysctl.c | 2 + kernel/trace/pid_list.c | 4 ++ kernel/trace/trace.c | 4 ++ kernel/trace/trace.h | 2 + 11 files changed, 122 insertions(+), 5 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..a040a64a8350 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -999,6 +999,7 @@ CONFIG_ARCH_USE_QUEUED_RWLOCKS=y CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..da0f386608d7 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -2,6 +2,7 @@ # Automatically generated file; DO NOT EDIT. # Linux/x86 6.6.0 Kernel Configuration # +CONFIG_TOOLS_SUPPORT_RELR=y CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_TABLE_SORT=y CONFIG_THREAD_INFO_IN_TASK=y @@ -66,7 +67,6 @@ CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_INIT=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y @@ -90,6 +90,7 @@ CONFIG_CONTEXT_TRACKING_USER=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=125 +CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y # end of Timers subsystem CONFIG_BPF=y @@ -172,6 +173,7 @@ CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" CONFIG_GCC11_NO_ARRAY_BOUNDS=y +CONFIG_CC_NO_ARRAY_BOUNDS=y CONFIG_ARCH_SUPPORTS_INT128=y CONFIG_NUMA_BALANCING=y CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y @@ -188,13 +190,13 @@ CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_V1_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_QOS_SCHED=y +CONFIG_QOS_SCHED_SMT_EXPELLER=y CONFIG_QOS_SCHED_PRIO_LB=y CONFIG_FAIR_GROUP_SCHED=y -CONFIG_QOS_SCHED_SMT_EXPELLER=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y -CONFIG_SCHED_MM_CID=y CONFIG_QOS_SCHED_DYNAMIC_AFFINITY=y +CONFIG_SCHED_MM_CID=y CONFIG_CGROUP_PIDS=y CONFIG_CGROUP_RDMA=y CONFIG_CGROUP_FREEZER=y @@ -287,6 +289,8 @@ CONFIG_PERF_EVENTS=y CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y +CONFIG_KABI_RESERVE=y +CONFIG_KABI_SIZE_ALIGN_CHECKS=y # # Kexec and crash features @@ -512,6 +516,7 @@ CONFIG_LEGACY_VSYSCALL_XONLY=y # CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y # CONFIG_STRICT_SIGALTSTACK_SIZE is not set +CONFIG_HAVE_LIVEPATCH_FTRACE=y CONFIG_HAVE_LIVEPATCH_WO_FTRACE=y # @@ -542,6 +547,7 @@ CONFIG_CALL_DEPTH_TRACKING=y CONFIG_CPU_IBPB_ENTRY=y CONFIG_CPU_IBRS_ENTRY=y CONFIG_CPU_SRSO=y +# CONFIG_SLS is not set # CONFIG_GDS_FORCE_MITIGATION is not set CONFIG_ARCH_HAS_ADD_PAGES=y @@ -927,6 +933,7 @@ CONFIG_MODULE_SIG_ALL=y CONFIG_MODULE_SIG_SHA256=y # CONFIG_MODULE_SIG_SHA384 is not set # CONFIG_MODULE_SIG_SHA512 is not set +# CONFIG_MODULE_SIG_SM3 is not set CONFIG_MODULE_SIG_HASH="sha256" CONFIG_MODULE_COMPRESS_NONE=y # CONFIG_MODULE_COMPRESS_GZIP is not set @@ -944,6 +951,7 @@ CONFIG_BLK_ICQ=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_INTEGRITY_T10=m +CONFIG_BLK_DEV_WRITE_MOUNTED=y CONFIG_BLK_DEV_ZONED=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_BLK_DEV_THROTTLING_LOW is not set @@ -1015,6 +1023,7 @@ CONFIG_QUEUED_RWLOCKS=y CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_PID_MAX_PER_NAMESPACE=y CONFIG_FREEZER=y # @@ -1099,6 +1108,7 @@ CONFIG_DEVICE_MIGRATION=y CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y CONFIG_ARCH_ENABLE_THP_MIGRATION=y CONFIG_CONTIG_ALLOC=y +CONFIG_PCP_BATCH_SCALE_MAX=5 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y @@ -1155,6 +1165,8 @@ CONFIG_LRU_GEN=y CONFIG_ARCH_SUPPORTS_PER_VMA_LOCK=y CONFIG_PER_VMA_LOCK=y CONFIG_LOCK_MM_AND_FIND_VMA=y +# CONFIG_ASCEND_OOM is not set +# CONFIG_PAGE_CACHE_LIMIT is not set # # Data Access Monitoring @@ -1949,6 +1961,7 @@ CONFIG_PAGE_POOL=y # CONFIG_PAGE_POOL_STATS is not set CONFIG_FAILOVER=m CONFIG_ETHTOOL_NETLINK=y +CONFIG_NETACC_BPF=y # # Device Drivers @@ -2743,6 +2756,7 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m +# CONFIG_IPVLAN_L2E is not set CONFIG_IPVLAN_L3S=y CONFIG_IPVLAN=m CONFIG_IPVTAP=m @@ -5636,6 +5650,7 @@ CONFIG_FB_HYPERV=m # CONFIG_FB_SIMPLE is not set # CONFIG_FB_SSD1307 is not set # CONFIG_FB_SM712 is not set +# CONFIG_FB_LS2K500 is not set CONFIG_FB_CORE=y CONFIG_FB_NOTIFY=y # CONFIG_FIRMWARE_EDID is not set @@ -7978,6 +7993,12 @@ CONFIG_INTEL_TH_PTI=m # CONFIG_MOST is not set # CONFIG_PECI is not set # CONFIG_HTE is not set + +# +# CPU Inspect +# +# CONFIG_CPU_INSPECT is not set +# end of CPU Inspect # end of Device Drivers # @@ -8300,6 +8321,7 @@ CONFIG_NLS_UCS2_UTILS=m CONFIG_DLM=m CONFIG_DLM_DEBUG=y CONFIG_UNICODE=y +# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set CONFIG_IO_WQ=y # end of File systems @@ -8407,6 +8429,7 @@ CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity,selinux,smack,tomoyo,appar CONFIG_INIT_STACK_NONE=y # CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set # CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +# CONFIG_ZERO_CALL_USED_REGS is not set # end of Memory initialization # @@ -8418,6 +8441,8 @@ CONFIG_LIST_HARDENED=y CONFIG_RANDSTRUCT_NONE=y # end of Kernel hardening options + +# CONFIG_SECURITY_BOOT_INIT is not set # end of Security options CONFIG_XOR_BLOCKS=m @@ -8889,6 +8914,7 @@ CONFIG_DEBUG_INFO_COMPRESSED_NONE=y # CONFIG_DEBUG_INFO_SPLIT is not set CONFIG_DEBUG_INFO_BTF=y CONFIG_PAHOLE_HAS_SPLIT_BTF=y +CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y CONFIG_DEBUG_INFO_BTF_MODULES=y # CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set # CONFIG_GDB_SCRIPTS is not set @@ -8928,6 +8954,8 @@ CONFIG_ARCH_HAS_EARLY_DEBUG=y CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y # CONFIG_UBSAN is not set CONFIG_HAVE_ARCH_KCSAN=y +CONFIG_HAVE_KCSAN_COMPILER=y +# CONFIG_KCSAN is not set # end of Generic Kernel Debugging Instruments # @@ -8988,6 +9016,7 @@ CONFIG_LOCKUP_DETECTOR=y CONFIG_SOFTLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_HAVE_HARDLOCKUP_DETECTOR_BUDDY=y +# CONFIG_SDEI_WATCHDOG is not set CONFIG_HARDLOCKUP_DETECTOR=y # CONFIG_HARDLOCKUP_DETECTOR_PREFER_BUDDY is not set CONFIG_HARDLOCKUP_DETECTOR_PERF=y @@ -9205,5 +9234,3 @@ CONFIG_ARCH_USE_MEMTEST=y # # end of Rust hacking # end of Kernel hacking -CONFIG_KABI_SIZE_ALIGN_CHECKS=y -CONFIG_KABI_RESERVE=y diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..d52550d35427 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default n + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..b6791a8a211d 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -59,12 +59,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +87,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +204,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +248,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +664,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +705,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +715,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 depent on GICv4,test on 6.6 mainline with NIC PCI passthrough Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

1 3

[PATCH OLK-5.10 V1] nvmet: nul-terminate the NQNs passed in the connect command
by Cheng Yu 10 Jan '24

10 Jan '24

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v6.7-rc3 commit 1c22e0295a5eb571c27b53c7371f95699ef705ff category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8H4UJ CVE: CVE-2023-6121 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi <zahavi.alon(a)gmail.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Cheng Yu <serein.chengyu(a)huawei.com> --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index e62d3d0fa6c8..66506a70310d 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -189,6 +189,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) { @@ -250,6 +252,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req, &ctrl); -- 2.25.1

2 1

[PATCH OLK-6.6 00/19] mm: mem_reliable: Introduce memory reliable
by Wupeng Ma 10 Jan '24

10 Jan '24

From: Ma Wupeng <mawupeng1(a)huawei.com> Introduction ============ Memory reliable feature is a memory tiering mechanism. It is based on kernel mirror feature, which splits memory into two separate regions, mirrored(reliable) region and non-mirrored (non-reliable) region. for kernel mirror feature: - allocate kernel memory from mirrored region by default - allocate user memory from non-mirrored region by default non-mirrored region will be arranged into ZONE_MOVABLE. for kernel reliable feature, it has additional features below: - normal user tasks never alloc memory from mirrored region with userspace apis(malloc, mmap, etc.) - special user tasks will allocate memory from mirrored region by default - shmem/pagecache allocate memory from mirrored region by default - upper limit of mirrored region allcated for user tasks, shmem and page cache Support Reliable fallback mechanism which allows special user tasks, shmem and page cache can fallback to alloc non-mirrored region, it's the default setting. In order to fulfil the goal - ___GFP_RELIABLE flag added for alloc memory from mirrored region. - the high_zoneidx for special user tasks/shmem/pagecache is set to ZONE_NORMAL. - normal user tasks could only alloc from ZONE_MOVABLE. Chen Wandun (1): mm: mem_reliable: Alloc pagecache from reliable region Ma Wupeng (16): proc: introduce proc_hide_ents to hide proc files efi: Disable mirror feature during crashkernel mm: mem_reliable: Introduce memory reliable mm: mem_reliable: Alloc task memory from reliable region mm: mem_reliable: Add memory reliable support during hugepaged collapse mm/memblock: Introduce ability to alloc memory from specify memory region mm/hugetlb: Allocate non-mirrored memory by default mm: mem_reliable: Count reliable page cache usage mm: mem_reliable: Count reliable shmem usage mm: mem_reliable: Show reliable meminfo mm: mem_reliable: Add limiting the usage of reliable memory mm: mem_reliable: Introduce fallback mechanism for memory reliable proc: mem_reliable: Count reliable memory usage of reliable tasks mm: mem_reliable: Introduce proc interface to disable memory reliable features mm: mem_reliable: Show debug info about memory reliable if oom occurs config: enable MEMORY_RELIABLE by default Peng Wu (1): mm: mem_reliable: Add cmdline reliable_debug to enable separate feature Zhou Guanghui (1): shmem: mem_reliable: Alloc shmem from reliable region .../admin-guide/kernel-parameters.txt | 15 +- Documentation/filesystems/proc.rst | 30 ++ arch/arm64/configs/openeuler_defconfig | 1 + fs/proc/Makefile | 1 + fs/proc/base.c | 21 +- fs/proc/mem_reliable.c | 101 ++++ fs/proc/meminfo.c | 2 + fs/proc/task_mmu.c | 1 + include/linux/gfp.h | 6 + include/linux/gfp_types.h | 10 +- include/linux/mem_reliable.h | 261 ++++++++++ include/linux/memblock.h | 6 + include/linux/mm.h | 3 + include/linux/mm_inline.h | 6 + include/linux/mm_types.h | 4 + include/linux/mmzone.h | 5 + include/linux/sched.h | 5 + include/trace/events/mmflags.h | 3 +- kernel/events/uprobes.c | 2 + mm/Kconfig | 17 + mm/Makefile | 1 + mm/filemap.c | 11 +- mm/huge_memory.c | 4 + mm/hugetlb.c | 18 +- mm/khugepaged.c | 18 + mm/ksm.c | 2 + mm/mem_reliable.c | 473 ++++++++++++++++++ mm/memblock.c | 92 +++- mm/memory.c | 10 + mm/migrate.c | 5 + mm/migrate_device.c | 1 + mm/mm_init.c | 34 +- mm/page_alloc.c | 175 ++++++- mm/rmap.c | 7 + mm/shmem.c | 11 + mm/show_mem.c | 1 + mm/swapfile.c | 1 + mm/userswap.c | 4 + mm/vmscan.c | 2 + tools/perf/builtin-kmem.c | 1 + 40 files changed, 1343 insertions(+), 28 deletions(-) create mode 100644 fs/proc/mem_reliable.c create mode 100644 include/linux/mem_reliable.h create mode 100644 mm/mem_reliable.c -- 2.25.1

2 20

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 10 Jan '24

10 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 ++++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 39 +++++++++++++++++++++++--- 3 files changed, 44 insertions(+), 4 deletions(-) -- 2.25.1

2 2

[PATCH OLK-5.10 v2] net: bridge: multicast: fix UAF of net_bridge
by Ziyang Xuan 10 Jan '24

10 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UZTK CVE: NA -------------------------------- Get a UAF problem as following: ======================================================== BUG: KASAN: use-after-free in expire_timers+0x100/0x260 ... Call Trace: <IRQ> dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 ? expire_timers+0x100/0x260 __kasan_report.cold+0x6c/0x84 ? ipv6_mc_netdev_event+0x51/0x80 ? expire_timers+0x100/0x260 kasan_report+0x3a/0x50 expire_timers+0x100/0x260 run_timer_softirq+0x22c/0x550 ? expire_timers+0x260/0x260 ? pvclock_clocksource_read+0xf6/0x1d0 ? kvm_sched_clock_read+0x14/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x130 __do_softirq+0x104/0x42f asm_call_irq_on_stack+0xf/0x20 ... Allocated by task 26715: kasan_save_stack+0x1b/0x40 __kasan_kmalloc.constprop.0+0xf0/0x130 kvmalloc_node+0xc5/0x170 alloc_netdev_mqs+0x99/0x6b0 rtnl_create_link+0x170/0x510 __rtnl_newlink+0xc8a/0x10f0 rtnl_newlink+0x5a/0x90 rtnetlink_rcv_msg+0x303/0x780 netlink_rcv_skb+0xfd/0x2c0 netlink_unicast+0x2c1/0x3f0 netlink_sendmsg+0x537/0x950 __sock_sendmsg+0x10d/0x120 ____sys_sendmsg+0x519/0x590 ___sys_sendmsg+0xe9/0x150 __sys_sendmsg+0xea/0x190 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x62/0xc7 Freed by task 26715: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free.part.0+0x13f/0x1b0 kfree+0xce/0x860 kvfree+0x47/0x50 device_release+0x62/0x130 kobject_cleanup+0xb6/0x280 kobject_put+0xe0/0xf0 netdev_run_todo+0x440/0x6d0 rtnetlink_rcv_msg+0x313/0x780 netlink_rcv_skb+0xfd/0x2c0 netlink_unicast+0x2c1/0x3f0 netlink_sendmsg+0x537/0x950 __sock_sendmsg+0x10d/0x120 ____sys_sendmsg+0x519/0x590 ___sys_sendmsg+0xe9/0x150 __sys_sendmsg+0xea/0x190 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x62/0xc7 Under closed state of bridge netdev, try to activate ip6_own_query.timer of bridge netdev by br_multicast_set_querier(), and delete bridge netdev immediately afterwards. Because the timer will not be deleted during bridge netdev deleting process. When the timer is not activated before bridge netdev is released, UAF will be triggered to access the timer in expire_timers(). Add br_multicast_stop() in br_multicast_dev_del() to delete the timer during bridge netdev deleting process as done in commit 613d61dbef8e ("net: bridge: vlan: add global and per-port multicast context"). Fixes: cc0fdd802859 ("bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones") Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- v2: - remove "Offering" item. --- net/bridge/br_multicast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index e2b1bb3de4a1..f3886d5b7952 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -3357,6 +3357,7 @@ void br_multicast_dev_del(struct net_bridge *br) hlist_move_list(&br->mcast_gc_list, &deleted_head); spin_unlock_bh(&br->multicast_lock); + br_multicast_stop(br); br_multicast_gc(&deleted_head); cancel_work_sync(&br->mcast_gc_work); -- 2.25.1

2 1

[PATH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 depent on GICv4,test on 6.6 mainline with NIC PCI passthrough Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

1 3

[PATCH OLK-6.6 1/5] KVM: arm64: Support a new HiSi CPU type
by lishusen 10 Jan '24

10 Jan '24

From: Quan Zhou <zhouquan65(a)huawei.com> virt inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8TN8N CVE: NA ---------------------------------------------------- Add a new entry ("HIP09") in oem_str[] to support detection of the new HiSi CPU type. Signed-off-by: Quan Zhou <zhouquan65(a)huawei.com> Reviewed-by: Zenghui Yu <yuzenghui(a)huawei.com> Reviewed-by: Nianyao Tang <tangnianyao(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: lishusen <lishusen2(a)huawei.com> --- arch/arm64/kvm/hisilicon/hisi_virt.c | 4 +++- arch/arm64/kvm/hisilicon/hisi_virt.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kvm/hisilicon/hisi_virt.c b/arch/arm64/kvm/hisilicon/hisi_virt.c index 9587f9508a79..90c363ed642e 100644 --- a/arch/arm64/kvm/hisilicon/hisi_virt.c +++ b/arch/arm64/kvm/hisilicon/hisi_virt.c @@ -15,6 +15,7 @@ static const char * const hisi_cpu_type_str[] = { "Hisi1612", "Hisi1616", "Hisi1620", + "HIP09", "Unknown" }; @@ -22,7 +23,8 @@ static const char * const hisi_cpu_type_str[] = { static const char * const oem_str[] = { "HIP06", /* Hisi 1612 */ "HIP07", /* Hisi 1616 */ - "HIP08" /* Hisi 1620 */ + "HIP08", /* Hisi 1620 */ + "HIP09" /* HIP09 */ }; /* diff --git a/arch/arm64/kvm/hisilicon/hisi_virt.h b/arch/arm64/kvm/hisilicon/hisi_virt.h index ef8de6a2101e..ebc462bf2a9d 100644 --- a/arch/arm64/kvm/hisilicon/hisi_virt.h +++ b/arch/arm64/kvm/hisilicon/hisi_virt.h @@ -10,6 +10,7 @@ enum hisi_cpu_type { HI_1612, HI_1616, HI_1620, + HI_IP09, UNKNOWN_HI_TYPE }; -- 2.33.0

2 5

[PATCH OLK-5.10] net: bridge: multicast: fix UAF of net_bridge
by Ziyang Xuan 10 Jan '24

10 Jan '24

Offering: HULK hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UZTK CVE: NA -------------------------------- Get a UAF problem as following: ======================================================== BUG: KASAN: use-after-free in expire_timers+0x100/0x260 ... Call Trace: <IRQ> dump_stack+0xbe/0xfd print_address_description.constprop.0+0x19/0x170 ? expire_timers+0x100/0x260 __kasan_report.cold+0x6c/0x84 ? ipv6_mc_netdev_event+0x51/0x80 ? expire_timers+0x100/0x260 kasan_report+0x3a/0x50 expire_timers+0x100/0x260 run_timer_softirq+0x22c/0x550 ? expire_timers+0x260/0x260 ? pvclock_clocksource_read+0xf6/0x1d0 ? kvm_sched_clock_read+0x14/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x130 __do_softirq+0x104/0x42f asm_call_irq_on_stack+0xf/0x20 ... Allocated by task 26715: kasan_save_stack+0x1b/0x40 __kasan_kmalloc.constprop.0+0xf0/0x130 kvmalloc_node+0xc5/0x170 alloc_netdev_mqs+0x99/0x6b0 rtnl_create_link+0x170/0x510 __rtnl_newlink+0xc8a/0x10f0 rtnl_newlink+0x5a/0x90 rtnetlink_rcv_msg+0x303/0x780 netlink_rcv_skb+0xfd/0x2c0 netlink_unicast+0x2c1/0x3f0 netlink_sendmsg+0x537/0x950 __sock_sendmsg+0x10d/0x120 ____sys_sendmsg+0x519/0x590 ___sys_sendmsg+0xe9/0x150 __sys_sendmsg+0xea/0x190 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x62/0xc7 Freed by task 26715: kasan_save_stack+0x1b/0x40 kasan_set_track+0x1c/0x30 kasan_set_free_info+0x20/0x40 __kasan_slab_free.part.0+0x13f/0x1b0 kfree+0xce/0x860 kvfree+0x47/0x50 device_release+0x62/0x130 kobject_cleanup+0xb6/0x280 kobject_put+0xe0/0xf0 netdev_run_todo+0x440/0x6d0 rtnetlink_rcv_msg+0x313/0x780 netlink_rcv_skb+0xfd/0x2c0 netlink_unicast+0x2c1/0x3f0 netlink_sendmsg+0x537/0x950 __sock_sendmsg+0x10d/0x120 ____sys_sendmsg+0x519/0x590 ___sys_sendmsg+0xe9/0x150 __sys_sendmsg+0xea/0x190 do_syscall_64+0x30/0x40 entry_SYSCALL_64_after_hwframe+0x62/0xc7 Under closed state of bridge netdev, try to activate ip6_own_query.timer of bridge netdev by br_multicast_set_querier(), and delete bridge netdev immediately afterwards. Because the timer will not be deleted during bridge netdev deleting process. When the timer is not activated before bridge netdev is released, UAF will be triggered to access the timer in expire_timers(). Add br_multicast_stop() in br_multicast_dev_del() to delete the timer during bridge netdev deleting process as done in commit 613d61dbef8e ("net: bridge: vlan: add global and per-port multicast context"). Fixes: cc0fdd802859 ("bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones") Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/bridge/br_multicast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index e2b1bb3de4a1..f3886d5b7952 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -3357,6 +3357,7 @@ void br_multicast_dev_del(struct net_bridge *br) hlist_move_list(&br->mcast_gc_list, &deleted_head); spin_unlock_bh(&br->multicast_lock); + br_multicast_stop(br); br_multicast_gc(&deleted_head); cancel_work_sync(&br->mcast_gc_work); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] net: bridge: multicast: fix UAF of net_bridge
by Ziyang Xuan 10 Jan '24

10 Jan '24

Offering: HULK hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UZTK CVE: NA -------------------------------- Get a UAF problem as following: ======================================================== BUG: KASAN: use-after-free in run_timer_softirq+0x526/0x750 ... Call Trace: <IRQ> dump_stack+0x8b/0xbb print_address_description+0x6a/0x270 kasan_report+0x179/0x2c0 ? run_timer_softirq+0x526/0x750 run_timer_softirq+0x526/0x750 ? pvclock_clocksource_read+0xd1/0x180 ? init_timer_key+0xc0/0xc0 ? kvm_sched_clock_read+0xd/0x20 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x100 __do_softirq+0x119/0x3a2 irq_exit+0x153/0x160 smp_apic_timer_interrupt+0x92/0x1a0 apic_timer_interrupt+0xf/0x20 ... Allocated by task 11277: kasan_kmalloc+0xa0/0xd0 __kmalloc_node+0x190/0x2b0 kvmalloc_node+0x43/0x70 alloc_netdev_mqs+0x6a/0x660 rtnl_create_link+0x12a/0x420 rtnl_newlink+0x832/0xab0 rtnetlink_rcv_msg+0x424/0x500 netlink_rcv_skb+0xcd/0x200 netlink_unicast+0x2e9/0x3a0 netlink_sendmsg+0x4d7/0x670 sock_sendmsg+0x6d/0x80 ____sys_sendmsg+0x36a/0x3d0 ___sys_sendmsg+0x10a/0x190 __sys_sendmsg+0xd2/0x150 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Freed by task 11313: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1a0 device_release+0x47/0xe0 kobject_release+0x98/0x200 netdev_run_todo+0x36d/0x490 rtnetlink_rcv_msg+0x42c/0x500 netlink_rcv_skb+0xcd/0x200 netlink_unicast+0x2e9/0x3a0 netlink_sendmsg+0x4d7/0x670 sock_sendmsg+0x6d/0x80 ____sys_sendmsg+0x36a/0x3d0 ___sys_sendmsg+0x10a/0x190 __sys_sendmsg+0xd2/0x150 do_syscall_64+0x77/0x2c0 entry_SYSCALL_64_after_hwframe+0x5c/0xc1 Under closed state of bridge netdev, try to activate ip6_own_query.timer of bridge netdev by br_multicast_set_querier(), and delete bridge netdev immediately afterwards. Because the timer will not be deleted during bridge netdev deleting process. When the timer is not activated before bridge netdev is released, UAF will be triggered to access the timer in run_timer_softirq(). Add br_multicast_stop() in br_multicast_dev_del() to delete the timer during bridge netdev deleting process as done in commit 613d61dbef8e ("net: bridge: vlan: add global and per-port multicast context"). Fixes: cc0fdd802859 ("bridge: separate querier and query timer into IGMP/IPv4 and MLD/IPv6 ones") Signed-off-by: Ziyang Xuan <william.xuanziyang(a)huawei.com> --- net/bridge/br_multicast.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c index 1dc32cbd20bb..d84abee1d24c 100644 --- a/net/bridge/br_multicast.c +++ b/net/bridge/br_multicast.c @@ -2068,6 +2068,7 @@ void br_multicast_dev_del(struct net_bridge *br) out: spin_unlock_bh(&br->multicast_lock); + br_multicast_stop(br); } int br_multicast_set_router(struct net_bridge *br, unsigned long val) -- 2.25.1

2 1

openEuler Kernel SIG双周例会
by openEuler conference 10 Jan '24

10 Jan '24

您好！ Kernel SIG 邀请您参加 2024-01-12 14:00 召开的WeLink会议(自动录制) 会议主题：openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中（新增议题可直接回复本邮件申报，也可填至会议看板）会议链接：https://bmeeting.huaweicloud.com:36443/#/j/983665981 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the WeLink conference(auto recording) will be held at 2024-01-12 14:00, The subject of the conference is openEuler Kernel SIG双周例会, Summary: 1. 进展update 2. 议题征集中（新增议题可直接回复本邮件申报，也可填至会议看板） You can join the meeting at https://bmeeting.huaweicloud.com:36443/#/j/983665981. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[PATCH OLK-6.6 0/4] Add L3T and LPDDRC pmu
by Chen Jun 10 Jan '24

10 Jan '24

Chen Jun (4): perf: hisi: Make irq shared perf: hisi: Fix read sccl_id and ccl_id error in some platform perf: hisi: Add support for HiSilicon SoC L3T PMU perf: hisi: Add support for HiSilicon SoC LPDDRC PMU arch/arm64/configs/openeuler_defconfig | 2 + drivers/perf/hisilicon/Kconfig | 18 + drivers/perf/hisilicon/Makefile | 2 + drivers/perf/hisilicon/hisi_uncore_l3t_pmu.c | 403 +++++++++++++++++ .../perf/hisilicon/hisi_uncore_lpddrc_pmu.c | 408 ++++++++++++++++++ drivers/perf/hisilicon/hisi_uncore_pmu.c | 46 +- drivers/perf/hisilicon/hisi_uncore_pmu.h | 2 + 7 files changed, 870 insertions(+), 11 deletions(-) create mode 100644 drivers/perf/hisilicon/hisi_uncore_l3t_pmu.c create mode 100644 drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c -- 2.17.1

2 5

[PATCH OLK-6.6 1/3] KVM: arm64: Probe Hisi CPU TYPE from ACPI/DTB
by lishusen 10 Jan '24

10 Jan '24

From: Zenghui Yu <yuzenghui(a)huawei.com> virt inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8TN8N CVE: NA ---------------------------------------------------- Parse ACPI/DTB to get where the hypervisor is running. Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> Signed-off-by: Yanan Wang <wangyanan55(a)huawei.com> Reviewed-by: Zenghui Yu <yuzenghui(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: lishusen <lishusen2(a)huawei.com> --- arch/arm64/include/asm/hisi_cpu_model.h | 19 ++++++ arch/arm64/include/asm/kvm_host.h | 1 + arch/arm64/kvm/Makefile | 1 + arch/arm64/kvm/arm.c | 6 ++ arch/arm64/kvm/hisi_cpu_model.c | 83 +++++++++++++++++++++++++ 5 files changed, 110 insertions(+) create mode 100644 arch/arm64/include/asm/hisi_cpu_model.h create mode 100644 arch/arm64/kvm/hisi_cpu_model.c diff --git a/arch/arm64/include/asm/hisi_cpu_model.h b/arch/arm64/include/asm/hisi_cpu_model.h new file mode 100644 index 000000000000..f686a7591e8f --- /dev/null +++ b/arch/arm64/include/asm/hisi_cpu_model.h @@ -0,0 +1,19 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright(c) 2019 Huawei Technologies Co., Ltd + */ + +#ifndef __HISI_CPU_MODEL_H__ +#define __HISI_CPU_MODEL_H__ + +enum hisi_cpu_type { + HI_1612, + HI_1616, + HI_1620, + UNKNOWN_HI_TYPE +}; + +extern enum hisi_cpu_type hi_cpu_type; + +void probe_hisi_cpu_type(void); +#endif /* __HISI_CPU_MODEL_H__ */ diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index af06ccb7ee34..5154085849fa 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -27,6 +27,7 @@ #include <asm/fpsimd.h> #include <asm/kvm.h> #include <asm/kvm_asm.h> +#include <asm/hisi_cpu_model.h> #define __KVM_HAVE_ARCH_INTC_INITIALIZED diff --git a/arch/arm64/kvm/Makefile b/arch/arm64/kvm/Makefile index c0c050e53157..86c6ded87eeb 100644 --- a/arch/arm64/kvm/Makefile +++ b/arch/arm64/kvm/Makefile @@ -15,6 +15,7 @@ kvm-y += arm.o mmu.o mmio.o psci.o hypercalls.o pvtime.o \ guest.o debug.o reset.o sys_regs.o stacktrace.o \ vgic-sys-reg-v3.o fpsimd.o pkvm.o \ arch_timer.o trng.o vmid.o emulate-nested.o nested.o \ + hisi_cpu_model.o \ vgic/vgic.o vgic/vgic-init.o \ vgic/vgic-irqfd.o vgic/vgic-v2.o \ vgic/vgic-v3.o vgic/vgic-v4.o \ diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 4866b3f7b4ea..9d57a57283b3 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -56,6 +56,9 @@ DECLARE_KVM_NVHE_PER_CPU(struct kvm_cpu_context, kvm_hyp_ctxt); static bool vgic_present, kvm_arm_initialised; +/* Hisi cpu type enum */ +enum hisi_cpu_type hi_cpu_type = UNKNOWN_HI_TYPE; + static DEFINE_PER_CPU(unsigned char, kvm_hyp_initialized); DEFINE_STATIC_KEY_FALSE(userspace_irqchip_in_use); @@ -2415,6 +2418,9 @@ static __init int kvm_arm_init(void) return err; } + /* Probe the Hisi CPU type */ + probe_hisi_cpu_type(); + in_hyp_mode = is_kernel_in_hyp_mode(); if (cpus_have_final_cap(ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE) || diff --git a/arch/arm64/kvm/hisi_cpu_model.c b/arch/arm64/kvm/hisi_cpu_model.c new file mode 100644 index 000000000000..4d5a099bc27a --- /dev/null +++ b/arch/arm64/kvm/hisi_cpu_model.c @@ -0,0 +1,83 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright(c) 2019 Huawei Technologies Co., Ltd + */ + +#include <linux/acpi.h> +#include <linux/of.h> +#include <linux/init.h> +#include <linux/kvm_host.h> + +#ifdef CONFIG_ACPI + +/* ACPI Hisi oem table id str */ +const char *oem_str[] = { + "HIP06", /* Hisi 1612 */ + "HIP07", /* Hisi 1616 */ + "HIP08" /* Hisi 1620 */ +}; + +/* + * Get Hisi oem table id. + */ +static void acpi_get_hw_cpu_type(void) +{ + struct acpi_table_header *table; + acpi_status status; + int i, str_size = ARRAY_SIZE(oem_str); + + /* Get oem table id from ACPI table header */ + status = acpi_get_table(ACPI_SIG_DSDT, 0, &table); + if (ACPI_FAILURE(status)) { + pr_err("Failed to get ACPI table: %s\n", + acpi_format_exception(status)); + return; + } + + for (i = 0; i < str_size; ++i) { + if (!strncmp(oem_str[i], table->oem_table_id, 5)) { + hi_cpu_type = i; + return; + } + } +} + +#else +static void acpi_get_hw_cpu_type(void) {} +#endif + +/* of Hisi cpu model str */ +const char *of_model_str[] = { + "Hi1612", + "Hi1616" +}; + +static void of_get_hw_cpu_type(void) +{ + const char *cpu_type; + int ret, i, str_size = ARRAY_SIZE(of_model_str); + + ret = of_property_read_string(of_root, "model", &cpu_type); + if (ret < 0) { + pr_err("Failed to get Hisi cpu model by OF.\n"); + return; + } + + for (i = 0; i < str_size; ++i) { + if (strstr(cpu_type, of_model_str[i])) { + hi_cpu_type = i; + return; + } + } +} + +void probe_hisi_cpu_type(void) +{ + if (!acpi_disabled) + acpi_get_hw_cpu_type(); + else + of_get_hw_cpu_type(); + + if (hi_cpu_type == UNKNOWN_HI_TYPE) + pr_warn("UNKNOWN Hisi cpu type.\n"); +} -- 2.33.0

2 3

[PATH OLK-6.6 0/3] sync vgic-its from 5.10 to 6.6
by jiaqingtong 10 Jan '24

10 Jan '24

sync vgic-its from 5.10 to 6.6 depent on GICv4,test on 6.6 mainline with NIC PCI passthrough Heyi Guo (1): KVM: arm64: vgic-its: Flush pending LPIs when nuking DT Xiangyou Xie (2): KVM: arm/arm64: vgic-its: Introduce multiple LPI translation caches KVM: arm/arm64: vgic-its: Do not execute invalidate MSI-LPI translation cache on movi command arch/arm64/kvm/vgic/vgic-init.c | 8 +- arch/arm64/kvm/vgic/vgic-its.c | 255 +++++++++++++++++++++----------- include/kvm/arm_vgic.h | 13 +- 3 files changed, 183 insertions(+), 93 deletions(-) base-commit: ade260241330687a9006159f604a00deac794776 -- 2.43.GIT

1 0

[PATCH OLK-6.6 v7 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 10 Jan '24

10 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP. 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. Li Lingfeng (5): block: Count writers and mounters regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 17 +++++++ block/bdev.c | 95 ++++++++++++++++++++++++++++++++------- include/linux/blk_types.h | 1 + 3 files changed, 98 insertions(+), 15 deletions(-) -- 2.31.1

2 6

[PATCH OLK-6.6 0/2] cgroup: Support iocost for cgroup v1
by Li Nan 10 Jan '24

10 Jan '24

Li Nan (2): cgroup: Support iocost for cgroup v1 openeuler_defconfig: enable iocost in openeuler_defconfig for x86 and arm64 block/blk-iocost.c | 27 ++++++++++++++++++++++++++ arch/arm64/configs/openeuler_defconfig | 4 +++- arch/x86/configs/openeuler_defconfig | 4 +++- block/Kconfig | 10 ++++++++++ 4 files changed, 43 insertions(+), 2 deletions(-) -- 2.39.2

2 3

[PATCH OLK-6.6 1/3] KVM: arm64: Adjust entry/exit and trap related tracepoints
by lishusen 10 Jan '24

10 Jan '24

virt inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4IZPY CVE: NA ------------------------------------------------- Currently, we use trace_kvm_exit() to report exception type (e.g., "IRQ", "TRAP") and exception class (ESR_ELx's bit[31:26]) together. But hardware only saves the exit class to ESR_ELx on synchronous exceptions, not on asynchronous exceptions. When the guest exits due to external interrupts, we will get tracing output like: "kvm_exit: IRQ: HSR_EC: 0x0000 (UNKNOWN), PC: 0xffff87259e30" Obviously, "HSR_EC" here is meaningless. This patch splits "exit" and "trap" events by adding two tracepoints explicitly in handle_trap_exceptions(). Let trace_kvm_exit() report VM exit events, and trace_kvm_trap_exit() report VM trap events. These tracepoints are adjusted also in preparation for supporting 'perf kvm stat' on arm64. Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> Reviewed-by: Hailiang Zhang <zhang.zhanghailiang(a)huawei.com> Signed-off-by: Zenghui Yu <yuzenghui(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Link: https://lore.kernel.org/r/1560330526-15468-3-git-send-email-yuzenghui@huawe… Link: https://gitee.com/openeuler/kernel/commit/14b85d8d7d2d Reviewed-by: Yanan Wang <wangyanan55(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: lishusen <lishusen2(a)huawei.com> --- arch/arm64/kvm/arm.c | 4 ++-- arch/arm64/kvm/handle_exit.c | 3 +++ arch/arm64/kvm/trace_arm.h | 21 +++++++++--------- arch/arm64/kvm/trace_handle_exit.h | 35 ++++++++++++++++++++++++++++++ 4 files changed, 51 insertions(+), 12 deletions(-) diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c index 70fc3d00f82c..db1ea653a471 100644 --- a/arch/arm64/kvm/arm.c +++ b/arch/arm64/kvm/arm.c @@ -1029,7 +1029,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) /************************************************************** * Enter the guest */ - trace_kvm_entry(*vcpu_pc(vcpu)); + trace_kvm_entry(vcpu->vcpu_id, *vcpu_pc(vcpu)); guest_timing_enter_irqoff(); ret = kvm_arm_vcpu_enter_exit(vcpu); @@ -1086,7 +1086,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu) local_irq_enable(); - trace_kvm_exit(ret, kvm_vcpu_trap_get_class(vcpu), *vcpu_pc(vcpu)); + trace_kvm_exit(vcpu->vcpu_id, ret, *vcpu_pc(vcpu)); /* Exit types that need handling before we can be preempted */ handle_exit_early(vcpu, ret); diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 617ae6dea5d5..a8e370435e54 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -309,7 +309,10 @@ static int handle_trap_exceptions(struct kvm_vcpu *vcpu) exit_handle_fn exit_handler; exit_handler = kvm_get_exit_handler(vcpu); + trace_kvm_trap_enter(vcpu->vcpu_id, + kvm_vcpu_trap_get_class(vcpu)); handled = exit_handler(vcpu); + trace_kvm_trap_exit(vcpu->vcpu_id); } return handled; diff --git a/arch/arm64/kvm/trace_arm.h b/arch/arm64/kvm/trace_arm.h index 8ad53104934d..4a87477e2261 100644 --- a/arch/arm64/kvm/trace_arm.h +++ b/arch/arm64/kvm/trace_arm.h @@ -13,40 +13,41 @@ * Tracepoints for entry/exit to guest */ TRACE_EVENT(kvm_entry, - TP_PROTO(unsigned long vcpu_pc), - TP_ARGS(vcpu_pc), + TP_PROTO(unsigned int vcpu_id, unsigned long vcpu_pc), + TP_ARGS(vcpu_id, vcpu_pc), TP_STRUCT__entry( + __field( unsigned int, vcpu_id ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->vcpu_id = vcpu_id; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("PC: 0x%016lx", __entry->vcpu_pc) + TP_printk("VCPU %u: PC=0x%016lx", __entry->vcpu_id, __entry->vcpu_pc) ); TRACE_EVENT(kvm_exit, - TP_PROTO(int ret, unsigned int esr_ec, unsigned long vcpu_pc), - TP_ARGS(ret, esr_ec, vcpu_pc), + TP_PROTO(unsigned int vcpu_id, int ret, unsigned long vcpu_pc), + TP_ARGS(vcpu_id, ret, vcpu_pc), TP_STRUCT__entry( + __field( unsigned int, vcpu_id ) __field( int, ret ) - __field( unsigned int, esr_ec ) __field( unsigned long, vcpu_pc ) ), TP_fast_assign( + __entry->vcpu_id = vcpu_id; __entry->ret = ARM_EXCEPTION_CODE(ret); - __entry->esr_ec = ARM_EXCEPTION_IS_TRAP(ret) ? esr_ec : 0; __entry->vcpu_pc = vcpu_pc; ), - TP_printk("%s: HSR_EC: 0x%04x (%s), PC: 0x%016lx", + TP_printk("VCPU %u: exit_type=%s, PC=0x%016lx", + __entry->vcpu_id, __print_symbolic(__entry->ret, kvm_arm_exception_type), - __entry->esr_ec, - __print_symbolic(__entry->esr_ec, kvm_arm_exception_class), __entry->vcpu_pc) ); diff --git a/arch/arm64/kvm/trace_handle_exit.h b/arch/arm64/kvm/trace_handle_exit.h index 064a58c19f48..cda43f243f7e 100644 --- a/arch/arm64/kvm/trace_handle_exit.h +++ b/arch/arm64/kvm/trace_handle_exit.h @@ -8,6 +8,41 @@ #undef TRACE_SYSTEM #define TRACE_SYSTEM kvm +TRACE_EVENT(kvm_trap_enter, + TP_PROTO(unsigned int vcpu_id, unsigned int esr_ec), + TP_ARGS(vcpu_id, esr_ec), + + TP_STRUCT__entry( + __field(unsigned int, vcpu_id) + __field(unsigned int, esr_ec) + ), + + TP_fast_assign( + __entry->vcpu_id = vcpu_id; + __entry->esr_ec = esr_ec; + ), + + TP_printk("VCPU %u: HSR_EC=0x%04x (%s)", + __entry->vcpu_id, + __entry->esr_ec, + __print_symbolic(__entry->esr_ec, kvm_arm_exception_class)) +); + +TRACE_EVENT(kvm_trap_exit, + TP_PROTO(unsigned int vcpu_id), + TP_ARGS(vcpu_id), + + TP_STRUCT__entry( + __field(unsigned int, vcpu_id) + ), + + TP_fast_assign( + __entry->vcpu_id = vcpu_id; + ), + + TP_printk("VCPU %u", __entry->vcpu_id) +); + TRACE_EVENT(kvm_wfx_arm64, TP_PROTO(unsigned long vcpu_pc, bool is_wfe), TP_ARGS(vcpu_pc, is_wfe), -- 2.33.0

2 3

[PATCH OLK-6.6] sched/core: Change depends of SCHED_CORE
by Xia Fukun 09 Jan '24

09 Jan '24

From: Lin Shengwang <linshengwang1(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UVUS CVE: NA -------------------------------------------------------------------------- Due to the conflict between Core Scheduling and SMT expeller, so SCHED_CORE and QOS_SCHED_SMT_EXPELLER are mutually exclusive. Signed-off-by: Lin Shengwang <linshengwang1(a)huawei.com> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/Kconfig.preempt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/Kconfig.preempt b/kernel/Kconfig.preempt index c2f1fd95a821..dc2a630f200a 100644 --- a/kernel/Kconfig.preempt +++ b/kernel/Kconfig.preempt @@ -117,7 +117,7 @@ config PREEMPT_DYNAMIC config SCHED_CORE bool "Core Scheduling for SMT" - depends on SCHED_SMT + depends on SCHED_SMT && !QOS_SCHED_SMT_EXPELLER help This option permits Core Scheduling, a means of coordinated task selection across SMT siblings. When enabled -- see -- 2.34.1

2 1

[PATCH OLK-6.6 v4 0/8] introduce smart_grid zone
by Yipeng Zou 09 Jan '24

09 Jan '24

The patch sets include two parts: 1. patch 1~3: Rebase smart_grid from OLK-5.10 to OLK-6.6 2. patch 4~7: introduce smart_grid zone qos and cpufreq Since V3: 1. fix some review comments Since V2: 1. move new sysctl form sysctl.c to fair.c 2. add smart_grid cmdline Since V1: 1. Don't init smart_grid cpufreq with dynamic_affinity disable. 2. Forbid smart_grid cgroup interface with dynamic_affinity disable. Hui Tang (1): sched: Introduce smart grid scheduling strategy for cfs Wang ShaoBo (2): sched: smart grid: init sched_grid_qos structure on QOS purpose config: enable CONFIG_QOS_SCHED_SMART_GRID by default Yipeng Zou (5): sched: introduce smart grid qos zone smart_grid: introduce /proc/pid/smart_grid_level smart_grid: introduce smart_grid_strategy_ctrl sysctl smart_grid: cpufreq: introduce smart_grid cpufreq control smart_grid: introduce smart_grid cmdline arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/cpufreq/cpufreq.c | 244 +++++++++++ fs/proc/array.c | 16 + fs/proc/base.c | 84 ++++ include/linux/cpufreq.h | 11 + include/linux/sched.h | 31 ++ include/linux/sched/grid_qos.h | 135 +++++++ init/Kconfig | 13 + kernel/fork.c | 15 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 181 +++++++++ kernel/sched/fair.c | 537 ++++++++++++++++++++++++- kernel/sched/grid/Makefile | 2 + kernel/sched/grid/internal.h | 6 + kernel/sched/grid/power.c | 27 ++ kernel/sched/grid/qos.c | 279 +++++++++++++ kernel/sched/grid/stat.c | 47 +++ kernel/sched/sched.h | 48 ++- mm/mempolicy.c | 11 +- 20 files changed, 1679 insertions(+), 11 deletions(-) create mode 100644 include/linux/sched/grid_qos.h create mode 100644 kernel/sched/grid/Makefile create mode 100644 kernel/sched/grid/internal.h create mode 100644 kernel/sched/grid/power.c create mode 100644 kernel/sched/grid/qos.c create mode 100644 kernel/sched/grid/stat.c -- 2.34.1

2 9

[PATCH OLK-6.6] sched/smt: fix unbalance sched_smt_present dec/inc
by Xia Fukun 09 Jan '24

09 Jan '24

From: Yang Yingliang <yangyingliang(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UR4U CVE: NA -------------------------------- If cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decreased before calling sched_cpu_deactivate, it leads unbalance dec/inc, so fix it by increasing sched_smt_present in the error path. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/sched/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 7a0997e7e136..adecea9c607d 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -9792,6 +9792,10 @@ int sched_cpu_deactivate(unsigned int cpu) ret = cpuset_cpu_inactive(cpu); if (ret) { balance_push_set(cpu, false); +#ifdef CONFIG_SCHED_SMT + if (cpumask_weight(cpu_smt_mask(cpu)) == 2) + static_branch_inc_cpuslocked(&sched_smt_present); +#endif set_cpu_active(cpu, true); sched_update_numa(cpu, true); return ret; -- 2.34.1

2 1

[PATCH OLK-6.6] kabi: Reserve space for perf subsystem related structures
by Yang Jihong 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOCZ -------------------------------- Reserve kabi space for `struct pmu`, `struct perf_event`, `struct perf_event_context`, `struct perf_cgroup_info` and `struct perf_sample_data`. Signed-off-by: Yang Jihong <yangjihong1(a)huawei.com> --- include/linux/perf_event.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index e846f87e2d09..a24aa95de1fc 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -62,6 +62,7 @@ struct perf_guest_info_callbacks { #include <linux/security.h> #include <linux/static_call.h> #include <linux/lockdep.h> +#include <linux/kabi.h> #include <asm/local.h> struct perf_callchain_entry { @@ -324,6 +325,11 @@ struct pmu { /* number of address filters this PMU can do */ unsigned int nr_addr_filters; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* * Fully disable/enable this PMU, can be used to protect from the PMI * as well as for lazy/batch writing of the MSRs. @@ -540,6 +546,11 @@ struct pmu { * Check period value for PERF_EVENT_IOC_PERIOD ioctl. */ int (*check_period) (struct perf_event *event, u64 value); /* optional */ + + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; enum perf_addr_filter_action_t { @@ -839,6 +850,13 @@ struct perf_event { * user. */ __u32 orig_type; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) #endif /* CONFIG_PERF_EVENTS */ }; @@ -965,6 +983,11 @@ struct perf_event_context { * that until the signal is delivered. */ local_t nr_pending; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* @@ -1040,6 +1063,9 @@ struct perf_cgroup_info { u64 timestamp; u64 timeoffset; int active; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct perf_cgroup { @@ -1192,6 +1218,11 @@ struct perf_sample_data { u64 data_page_size; u64 code_page_size; u64 aux_size; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) } ____cacheline_aligned; /* default value for data source */ -- 2.34.1

2 1

[PATCH OLK-6.6] xfs: update the last_sync_lsn with ctx start lsn
by Long Li 09 Jan '24

09 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UTJ5 CVE: NA -------------------------------- While performing the io fault injection test, I caught the following data corruption report: XFS (dm-6): Internal error ltbno + ltlen > bno at line 1976 of file fs/xfs/libxfs/xfs_alloc.c. Caller xfs_free_ag_extent+0x40b/0x930 [xfs] CPU: 7 PID: 184267 Comm: kworker/7:1 Kdump: loaded Tainted: G O 5.10.0-136.12.0.86.h1179.eulerosv2r12.x86_64 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20211121_093514-szxrtosci10000 04/01/2014 Workqueue: xfs-inodegc/dm-6 xfs_inodegc_worker [xfs] Call Trace: dump_stack+0x57/0x6e xfs_corruption_error+0x81/0x90 [xfs] xfs_free_ag_extent+0x43c/0x930 [xfs] xfs_free_agfl_block+0x3b/0xd0 [xfs] xfs_agfl_free_finish_item+0x14c/0x160 [xfs] xfs_defer_finish_one+0xd5/0x220 [xfs] xfs_defer_finish_noroll+0xb5/0x210 [xfs] xfs_defer_finish+0x11/0x70 [xfs] xfs_itruncate_extents_flags+0xc1/0x240 [xfs] xfs_inactive_truncate+0xab/0xe0 [xfs] xfs_inactive+0x154/0x170 [xfs] xfs_inodegc_inactivate+0x16/0x50 [xfs] xfs_inodegc_worker+0xa0/0x110 [xfs] process_one_work+0x1b5/0x350 worker_thread+0x49/0x310 kthread+0xfe/0x140 ret_from_fork+0x22/0x30 XFS (dm-6): Corruption detected. Unmount and run xfs_repair After analyzing the disk image, I found that the cause of the problem was that the transactions were not replayed. The problem arises in that the iclog buffer IO completion updates the l_last_sync_lsn with it's own LSN. Transactions can be large enough to span many iclogs, only commit iclog goes to update l_last_sync_lsn. Since the last_sync_lsn update and the insertion of the item into the ail list releases the l_icloglock, if the ail is is empty in the meantime, the new iclog gets the last_sync_lsn as tail lsn. If the new iclog is written to disk and a shutdown occurs, the current iclog will not be able to replay in the next mount. xlog_state_done_syncing xlog_state_do_callback spin_lock(&log->l_icloglock); xlog_state_do_iclog_callbacks xlog_state_iodone_process_iclog xlog_state_set_callback last_sync_lsn = iclog->ic_header.h_lsn spin_unlock(&log->l_icloglock); ====>AIL is empty and get tail lsn for new iclog xlog_cil_process_committed xlog_cil_committed xfs_trans_committed_bulk(ctx->start_lsn) xfs_log_item_batch_insert(commit_lsn) xlog_state_clean_iclog(log, iclog) spin_lock(&log->l_icloglock); spin_unlock(&log->l_icloglock); Fix is simple, updates the l_last_sync_lsn with it's first ctx start lsn when commit iclog buffer IO completion. Even if the above happens, the iclog will be replayed as well. Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/xfs/xfs_log.c | 19 +++++++++++-------- 1 file changed, 11 insertions(+), 8 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index bd167a94a6b3..96416b6ca013 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -2704,19 +2704,22 @@ xlog_get_lowest_lsn( static void xlog_state_set_callback( struct xlog *log, - struct xlog_in_core *iclog, - xfs_lsn_t header_lsn) + struct xlog_in_core *iclog) { + struct xfs_cil_ctx *ctx; + trace_xlog_iclog_callback(iclog, _RET_IP_); iclog->ic_state = XLOG_STATE_CALLBACK; - ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn), - header_lsn) <= 0); - - if (list_empty_careful(&iclog->ic_callbacks)) + ctx = list_first_entry_or_null(&iclog->ic_callbacks, + struct xfs_cil_ctx, iclog_entry); + if (!ctx) return; - atomic64_set(&log->l_last_sync_lsn, header_lsn); + ASSERT(XFS_LSN_CMP(atomic64_read(&log->l_last_sync_lsn), + ctx->start_lsn) <= 0); + + atomic64_set(&log->l_last_sync_lsn, ctx->start_lsn); xlog_grant_push_ail(log, 0); } @@ -2751,7 +2754,7 @@ xlog_state_iodone_process_iclog( lowest_lsn = xlog_get_lowest_lsn(log); if (lowest_lsn && XFS_LSN_CMP(lowest_lsn, header_lsn) < 0) return false; - xlog_state_set_callback(log, iclog, header_lsn); + xlog_state_set_callback(log, iclog); return false; default: /* -- 2.31.1

2 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 09 Jan '24

09 Jan '24

v2 -> v3 - fix code style and commit messages v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: add ETMEM feature CONFIG to mm/Kconfig etmem: add ETMEM scan feature CONFIG to mm/Kconfig mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

3 12

[PATCH OLK-6.6] hfs: fix null-ptr-deref in hfs_find_init()
by Long Li 09 Jan '24

09 Jan '24

From: Yang Yingliang <yangyingliang(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8URA4 CVE: CVE-2018-12928 -------------------------------- It will cause a null-ptr-deref in hfs_find_init() in fuzz test. [ 107.092729] hfs: continuing without an alternate MDB [ 107.097632] general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI [ 107.104679] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] [ 107.109100] CPU: 0 PID: 379 Comm: hfs_inject Not tainted 5.7.0-rc7-00001-g24627f5f2973 #897 [ 107.114142] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 107.121095] RIP: 0010:hfs_find_init+0x72/0x170 [ 107.123609] Code: c1 ea 03 80 3c 02 00 0f 85 e6 00 00 00 4c 8d 65 40 48 c7 43 18 00 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e a5 00 00 00 8b 45 40 be c0 0c [ 107.134660] RSP: 0018:ffff88810291f3f8 EFLAGS: 00010202 [ 107.137897] RAX: dffffc0000000000 RBX: ffff88810291f468 RCX: 1ffff110175cdf05 [ 107.141874] RDX: 0000000000000008 RSI: ffff88810291f468 RDI: ffff88810291f480 [ 107.145844] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020381013 [ 107.149431] R10: ffff88810291f500 R11: ffffed1020381012 R12: 0000000000000040 [ 107.152315] R13: 0000000000000000 R14: ffff888101c0814a R15: ffff88810291f468 [ 107.155464] FS: 00000000009ea880(0000) GS:ffff88810c600000(0000) knlGS:0000000000000000 [ 107.159795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 107.162987] CR2: 00005605a19dd284 CR3: 0000000103a0c006 CR4: 0000000000020ef0 [ 107.166665] Call Trace: [ 107.167969] ? find_held_lock+0x33/0x1c0 [ 107.169972] hfs_ext_read_extent+0x16b/0xb00 [ 107.172092] ? create_page_buffers+0x14e/0x1b0 [ 107.174303] ? hfs_free_extents+0x280/0x280 [ 107.176437] ? lock_downgrade+0x730/0x730 [ 107.178272] hfs_get_block+0x496/0x8a0 [ 107.179972] block_read_full_page+0x241/0x8d0 [ 107.181971] ? hfs_extend_file+0xae0/0xae0 [ 107.183814] ? end_buffer_async_read_io+0x10/0x10 [ 107.185954] ? add_to_page_cache_lru+0x13f/0x1f0 [ 107.188006] ? add_to_page_cache_locked+0x10/0x10 [ 107.190175] do_read_cache_page+0xc6a/0x1180 [ 107.192096] ? generic_file_read_iter+0x4c0/0x4c0 [ 107.194234] ? hfs_btree_open+0x408/0x1000 [ 107.196068] ? lock_downgrade+0x730/0x730 [ 107.197926] ? wake_bit_function+0x180/0x180 [ 107.199845] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.201895] hfs_btree_open+0x455/0x1000 [ 107.203479] hfs_mdb_get+0x122c/0x1ae8 [ 107.205065] ? hfs_mdb_put+0x350/0x350 [ 107.206590] ? queue_work_node+0x260/0x260 [ 107.208309] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 107.210227] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.212144] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.213979] hfs_fill_super+0x9ba/0x1280 [ 107.215444] ? bdev_name.isra.9+0xf1/0x2b0 [ 107.217028] ? hfs_remount+0x190/0x190 [ 107.218428] ? pointer+0x5da/0x710 [ 107.219745] ? file_dentry_name+0xf0/0xf0 [ 107.221262] ? mount_bdev+0xd1/0x330 [ 107.222592] ? vsnprintf+0x7bd/0x1250 [ 107.224007] ? pointer+0x710/0x710 [ 107.225332] ? down_write+0xe5/0x160 [ 107.226698] ? hfs_remount+0x190/0x190 [ 107.228120] ? snprintf+0x91/0xc0 [ 107.229388] ? vsprintf+0x10/0x10 [ 107.230628] ? sget+0x3af/0x4a0 [ 107.231848] ? hfs_remount+0x190/0x190 [ 107.233300] mount_bdev+0x26e/0x330 [ 107.234611] ? hfs_statfs+0x540/0x540 [ 107.236015] legacy_get_tree+0x101/0x1f0 [ 107.237431] ? security_capable+0x58/0x90 [ 107.238832] vfs_get_tree+0x89/0x2d0 [ 107.240082] ? ns_capable_common+0x5c/0xd0 [ 107.241521] do_mount+0xd8a/0x1720 [ 107.242727] ? lock_downgrade+0x730/0x730 [ 107.244116] ? copy_mount_string+0x20/0x20 [ 107.245557] ? _copy_from_user+0xbe/0x100 [ 107.246967] ? memdup_user+0x47/0x70 [ 107.248212] __x64_sys_mount+0x162/0x1b0 [ 107.249537] do_syscall_64+0xa5/0x4f0 [ 107.250742] entry_SYSCALL_64_after_hwframe+0x49/0xb3 [ 107.252369] RIP: 0033:0x44e8ea [ 107.253360] Code: 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 [ 107.259240] RSP: 002b:00007ffd910e4c28 EFLAGS: 00000207 ORIG_RAX: 00000000000000a5 [ 107.261668] RAX: ffffffffffffffda RBX: 0000000000400400 RCX: 000000000044e8ea [ 107.263920] RDX: 000000000049321e RSI: 0000000000493222 RDI: 00007ffd910e4d00 [ 107.266177] RBP: 00007ffd910e5d10 R08: 0000000000000000 R09: 000000000000000a [ 107.268451] R10: 0000000000000001 R11: 0000000000000207 R12: 0000000000401c40 [ 107.270721] R13: 0000000000000000 R14: 00000000006ba018 R15: 0000000000000000 [ 107.273025] Modules linked in: [ 107.274029] Dumping ftrace buffer: [ 107.275121] (ftrace buffer empty) [ 107.276370] ---[ end trace c5e0b9d684f3570e ]--- We need check tree in hfs_find_init(). https://lore.kernel.org/linux-fsdevel/20180419024358.GA5215@bombadil.infrad… https://marc.info/?l=linux-fsdevel&m=152406881024567&w=2 References: CVE-2018-12928 Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/hfs/bfind.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/hfs/bfind.c b/fs/hfs/bfind.c index ef9498a6e88a..ae44c8fa86ec 100644 --- a/fs/hfs/bfind.c +++ b/fs/hfs/bfind.c @@ -16,6 +16,8 @@ int hfs_find_init(struct hfs_btree *tree, struct hfs_find_data *fd) { void *ptr; + if (!tree) + return -EINVAL; fd->tree = tree; fd->bnode = NULL; ptr = kmalloc(tree->max_key_len * 2 + 4, GFP_KERNEL); -- 2.31.1

2 1

[PATCH OLK-6.6 v6 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 09 Jan '24

09 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. Li Lingfeng (5): block: Count writers and mounters regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 19 +++++++ block/bdev.c | 104 ++++++++++++++++++++++++++++++++------ include/linux/blk_types.h | 1 + 3 files changed, 109 insertions(+), 15 deletions(-) -- 2.31.1

2 6

[PATCH V4 OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 355 +++++++++++++++++++++++++ 5 files changed, 371 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index a417275129a4..13ddaf47cff2 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6925,6 +6925,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index c09c7fe35a54..84727e7ad415 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8121,6 +8121,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..712992cba9e6 --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +static unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry; + + dentry = d_find_alias(inode); + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit; + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + limit = READ_ONCE(buf_limit); + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("dirty_pages: please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + + ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long limit; + + ret = kstrtoul_from_user(buf, count, 10, &limit); + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

2 1

[PATCH OLK-6.6 0/2] Some simple extensions of the kfence feature
by Ze Zuo 09 Jan '24

09 Jan '24

This patchset supports the following two features: 1. The number of kfence objects is a key factor to balance kfence bug detection capabilities and performance loss, and often needs to be optimized according to actual business scenarios. The number of kfence objects can be dynamically configured kfence.num_objects cmdline, so as to reduce the release of kernel versions in actual use, thereby reducing costs. 2. The kfence feature under arm64 supports dynamic opening after system startup, which will turn all the kernel memblock memory into page-mapped mapping and increase the memory overhead, in order to save the page table memory usage, only the kfence pool supports page-mapped mapping, which can be enabled at kernel startup by setting kfence.sample _interval=-1 at kernel startup to enable the dynamic on capability, at this time it will allocate memory for kfence by default. The kfence will be allocated memory by default. Subsequent dynamic enablement and disabling will no longer consume additional memory. This feature has been tested under ARM64, x86_64 and ARM architectures, and the Kfence Kunit test results are consistent with the native ones. ChangeLog: - Add config kfence_must_early_init to perform code isolation for non-functional purposes. - Some minor changes about document, no functional changes. Ze Zuo (2): kfence: Add a module parameter to adjust kfence objects arm64: kfence: scale sample_interval to support early init for kfence. Documentation/dev-tools/kfence.rst | 8 +- arch/arm64/include/asm/kfence.h | 3 + arch/arm64/mm/mmu.c | 5 + include/linux/kfence.h | 13 +- lib/Kconfig.kfence | 28 +++++ mm/kfence/core.c | 189 +++++++++++++++++++++++++---- mm/kfence/kfence.h | 4 +- mm/kfence/kfence_test.c | 2 +- 8 files changed, 222 insertions(+), 30 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 09 Jan '24

09 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 2 ++ include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 ++++ kernel/pid.c | 57 +++++++++++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 ++++++++ kernel/sysctl.c | 2 ++ kernel/trace/pid_list.c | 4 +++ kernel/trace/trace.c | 4 +++ kernel/trace/trace.h | 2 ++ 9 files changed, 93 insertions(+) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..8c07d158bb54 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default y + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..4e9267988dd7 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -45,6 +45,10 @@ #include <net/sock.h> #include <uapi/linux/pidfd.h> +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +#include <linux/kmemleak.h> +#endif + struct pid init_struct_pid = { .count = REFCOUNT_INIT(1), .tasks = { @@ -59,12 +63,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +91,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +208,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +252,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +668,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +709,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +719,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH V4 OLK-6.6 0/8] Spark SQL scenario bpf readahead optimization synchronization to OLK-6.6
by ZhaoLong Wang 09 Jan '24

09 Jan '24

CONFIG: CONFIG_DEBUG_INFO_BTF=y CONFIG_BPF_SYSCALL=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y V2: - Using helpers function, such as i_size_read(), round_up - Fix commit log Signature - Fix the user-mode test program V3 - Do not use the round_up helper function. Use the correct calculation - err = -errno before printf V4 - Drop the "Conflict" in the commit log. Hou Tao (5): vfs: add bare tracepoints for vfs read and release fs: add helper fs_file_read_do_trace() xfs: add trace for read and release of regular file ext4: add trace for the read and release of regular file selftests/bpf: add demo for file read pattern detection Yufen Yu (1): readahead: introduce FMODE_CTL_WILLNEED to read first 2MB of file ZhaoLong Wang (2): VFS: Rolling Back the fmode macro definition and structure members selftests/bpf: Update the demo file_read_pattern to run on libbpf 1.0+ fs/ext4/file.c | 4 + fs/read_write.c | 38 +++++ fs/xfs/xfs_file.c | 3 + include/linux/fs.h | 37 +++++ include/trace/events/fs.h | 33 +++++ mm/readahead.c | 40 ++++- tools/testing/selftests/bpf/Makefile | 1 + .../testing/selftests/bpf/file_read_pattern.c | 76 ++++++++++ .../bpf/progs/file_read_pattern_prog.c | 137 ++++++++++++++++++ 9 files changed, 368 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/fs.h create mode 100644 tools/testing/selftests/bpf/file_read_pattern.c create mode 100644 tools/testing/selftests/bpf/progs/file_read_pattern_prog.c -- 2.39.2

2 9

[PATCH OLK-6.6 0/9] Add swap control for memcg
by Jinjiang Tu 09 Jan '24

09 Jan '24

This series patches add swap control for memory cgroup. Patch[1] add page type in memory.reclaim interface to support reclaim anon pages. Patch[3] add memory.force_swapin interface to support swap back pages proactively. Patch[4-6] add memory.swapfile interface to limit available swap device for memory cgroup. Patch[7] add memory.swap.max interface to limit usage of swap for memory cgroup. Jinjiang Tu (1): memcg: make sysctl registration more extensible Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default zhaoxiaoqiang11 (1): memcg/swap: add ability to disable memcg swap .../admin-guide/cgroup-v1/memory.rst | 4 + Documentation/admin-guide/cgroup-v2.rst | 10 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 35 ++ include/linux/mm.h | 4 + include/linux/swap.h | 12 +- include/linux/swap_slots.h | 2 +- init/Kconfig | 9 + mm/madvise.c | 31 +- mm/memcontrol.c | 493 +++++++++++++++++- mm/swap_slots.c | 151 +++++- mm/swapfile.c | 97 +++- mm/vmscan.c | 9 + 14 files changed, 810 insertions(+), 49 deletions(-) -- 2.25.1

2 10

[PATCH OLK-6.6] arm64: config: disable network config
by Zhengchao Shao 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8URWS CVE: NA -------------------------------- Disable arm64 network config. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 32 +++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 86370e8686f5..a7d78c16002b 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -1301,7 +1301,7 @@ CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NETFILTER_NETLINK_OSF=m CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_SYSLOG=m +# CONFIG_NF_LOG_SYSLOG is not set CONFIG_NETFILTER_CONNCOUNT=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y @@ -1863,7 +1863,7 @@ CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y CONFIG_RFKILL_GPIO=m CONFIG_NET_9P=m -CONFIG_NET_9P_FD=m +# CONFIG_NET_9P_FD is not set CONFIG_NET_9P_VIRTIO=m # CONFIG_NET_9P_RDMA is not set # CONFIG_NET_9P_DEBUG is not set @@ -2760,7 +2760,7 @@ CONFIG_NET_XGENE_V2=m CONFIG_NET_VENDOR_AQUANTIA=y # CONFIG_AQTION is not set CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ASIX=y +# CONFIG_NET_VENDOR_ASIX is not set # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set @@ -2805,16 +2805,16 @@ CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_CHELSIO_TLS_DEVICE=m # CONFIG_NET_VENDOR_CISCO is not set # CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_NET_VENDOR_DAVICOM=y +# CONFIG_NET_VENDOR_DAVICOM is not set # CONFIG_DM9051 is not set CONFIG_DNET=m # CONFIG_NET_VENDOR_DEC is not set # CONFIG_NET_VENDOR_DLINK is not set # CONFIG_NET_VENDOR_EMULEX is not set -CONFIG_NET_VENDOR_ENGLEDER=y +# CONFIG_NET_VENDOR_ENGLEDER is not set # CONFIG_TSNEP is not set # CONFIG_NET_VENDOR_EZCHIP is not set -CONFIG_NET_VENDOR_FUNGIBLE=y +# CONFIG_NET_VENDOR_FUNGIBLE is not set # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set @@ -2852,13 +2852,13 @@ CONFIG_I40E=m CONFIG_IAVF=m CONFIG_I40EVF=m CONFIG_ICE=m -CONFIG_ICE_SWITCHDEV=y +# CONFIG_ICE_SWITCHDEV is not set CONFIG_FM10K=m # CONFIG_IGC is not set # CONFIG_JME is not set -CONFIG_NET_VENDOR_ADI=y +# CONFIG_NET_VENDOR_ADI is not set # CONFIG_ADIN1110 is not set -CONFIG_NET_VENDOR_LITEX=y +# CONFIG_NET_VENDOR_LITEX is not set # CONFIG_LITEX_LITEETH is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y @@ -2895,7 +2895,7 @@ CONFIG_MLXFW=m # CONFIG_NET_VENDOR_MICROCHIP is not set CONFIG_NET_VENDOR_MICROSEMI=y # CONFIG_MSCC_OCELOT_SWITCH is not set -CONFIG_NET_VENDOR_MICROSOFT=y +# CONFIG_NET_VENDOR_MICROSOFT is not set CONFIG_NET_VENDOR_MYRI=y # CONFIG_MYRI10GE is not set # CONFIG_FEALNX is not set @@ -2906,7 +2906,7 @@ CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NFP=m CONFIG_NFP_APP_FLOWER=y CONFIG_NFP_APP_ABM_NIC=y -CONFIG_NFP_NET_IPSEC=y +# CONFIG_NFP_NET_IPSEC is not set # CONFIG_NFP_DEBUG is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y @@ -2966,10 +2966,10 @@ CONFIG_SMSC9420=m # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set -CONFIG_NET_VENDOR_VERTEXCOM=y +# CONFIG_NET_VENDOR_VERTEXCOM is not set # CONFIG_MSE102X is not set # CONFIG_NET_VENDOR_VIA is not set -CONFIG_NET_VENDOR_WANGXUN=y +# CONFIG_NET_VENDOR_WANGXUN is not set CONFIG_LIBWX=m CONFIG_NGBE=m CONFIG_TXGBE=m @@ -3235,7 +3235,7 @@ CONFIG_ATH10K_PCI=m CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set -CONFIG_WLAN_VENDOR_PURELIFI=y +# CONFIG_WLAN_VENDOR_PURELIFI is not set # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m @@ -3262,7 +3262,7 @@ CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set # CONFIG_WLAN_VENDOR_REALTEK is not set # CONFIG_WLAN_VENDOR_RSI is not set -CONFIG_WLAN_VENDOR_SILABS=y +# CONFIG_WLAN_VENDOR_SILABS is not set # CONFIG_WFX is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set @@ -7028,7 +7028,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y +# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1 is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y -- 2.34.1

2 1

[PATCH OLK-6.6] x86: config: disable network config
by Zhengchao Shao 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UM53 CVE: NA -------------------------------- Disable X86 network config. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 34 ++++++++++++++-------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 1ef398404878..dd7a8a3bca0f 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1860,7 +1860,7 @@ CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m CONFIG_BT_HS=y CONFIG_BT_LE=y -CONFIG_BT_LE_L2CAP_ECRED=y +# CONFIG_BT_LE_L2CAP_ECRED is not set # CONFIG_BT_6LOWPAN is not set # CONFIG_BT_LEDS is not set # CONFIG_BT_MSFTEXT is not set @@ -1876,7 +1876,7 @@ CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y -CONFIG_BT_HCIBTUSB_POLL_SYNC=y +# CONFIG_BT_HCIBTUSB_POLL_SYNC is not set CONFIG_BT_HCIBTUSB_BCM=y # CONFIG_BT_HCIBTUSB_MTK is not set CONFIG_BT_HCIBTUSB_RTL=y @@ -2788,7 +2788,7 @@ CONFIG_AMD_XGBE_HAVE_ECC=y CONFIG_NET_VENDOR_AQUANTIA=y CONFIG_AQTION=m # CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ASIX=y +# CONFIG_NET_VENDOR_ASIX is not set # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m @@ -2836,7 +2836,7 @@ CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m # CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_NET_VENDOR_DAVICOM=y +# CONFIG_NET_VENDOR_DAVICOM is not set # CONFIG_DM9051 is not set CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y @@ -2851,10 +2851,10 @@ CONFIG_BE2NET_HWMON=y # CONFIG_BE2NET_BE3 is not set CONFIG_BE2NET_LANCER=y CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_ENGLEDER=y +# CONFIG_NET_VENDOR_ENGLEDER is not set # CONFIG_TSNEP is not set # CONFIG_NET_VENDOR_EZCHIP is not set -CONFIG_NET_VENDOR_FUNGIBLE=y +# CONFIG_NET_VENDOR_FUNGIBLE is not set # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set @@ -2882,14 +2882,14 @@ CONFIG_I40E_DCB=y CONFIG_IAVF=m CONFIG_I40EVF=m CONFIG_ICE=m -CONFIG_ICE_SWITCHDEV=y -CONFIG_ICE_HWTS=y +# CONFIG_ICE_SWITCHDEV is not set +#CONFIG_ICE_HWTS is not set CONFIG_FM10K=m # CONFIG_IGC is not set # CONFIG_JME is not set -CONFIG_NET_VENDOR_ADI=y +# CONFIG_NET_VENDOR_ADI is not set # CONFIG_ADIN1110 is not set -CONFIG_NET_VENDOR_LITEX=y +# CONFIG_NET_VENDOR_LITEX is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m @@ -2924,7 +2924,7 @@ CONFIG_MLXFW=m # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_MICROSEMI is not set -CONFIG_NET_VENDOR_MICROSOFT=y +# CONFIG_NET_VENDOR_MICROSOFT is not set # CONFIG_MICROSOFT_MANA is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m @@ -2938,7 +2938,7 @@ CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NFP=m CONFIG_NFP_APP_FLOWER=y CONFIG_NFP_APP_ABM_NIC=y -CONFIG_NFP_NET_IPSEC=y +# CONFIG_NFP_NET_IPSEC is not set # CONFIG_NFP_DEBUG is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y @@ -2995,10 +2995,10 @@ CONFIG_SFC_MCDI_LOGGING=y # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set -CONFIG_NET_VENDOR_VERTEXCOM=y +# CONFIG_NET_VENDOR_VERTEXCOM is not set # CONFIG_MSE102X is not set # CONFIG_NET_VENDOR_VIA is not set -CONFIG_NET_VENDOR_WANGXUN=y +# CONFIG_NET_VENDOR_WANGXUN is not set CONFIG_LIBWX=m CONFIG_NGBE=m CONFIG_TXGBE=m @@ -3325,7 +3325,7 @@ CONFIG_MT76x2U=m CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set -CONFIG_WLAN_VENDOR_PURELIFI=y +# CONFIG_WLAN_VENDOR_PURELIFI is not set # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m @@ -3382,7 +3382,7 @@ CONFIG_RTL8XXXU=m # CONFIG_RTW88 is not set # CONFIG_RTW89 is not set # CONFIG_WLAN_VENDOR_RSI is not set -CONFIG_WLAN_VENDOR_SILABS=y +# CONFIG_WLAN_VENDOR_SILABS is not set # CONFIG_WFX is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set @@ -8225,7 +8225,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y +# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1 is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y -- 2.34.1

2 1

[PATCH OLK-6.6 v2] block: support to account io_ticks precisely
by Yu Kuai 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8RIME CVE: NA ----------------------------------------------- Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. In order to account io_ticks precisely, update_io_ticks() must know if there are IO inflight already, and this requires overhead slightly, hence precise io accounting is disabled by default, and user can enable it through sysfs entry. Noted that for rq-based devcie, part_stat_local_inc/dec() and part_in_flight() is used to track inflight instead of iterating tags, which is not supposed to be used in fast path because 'tags->lock' is grabbed in blk_mq_find_and_get_req(). Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Changes in v2: - some minor code changes, no functional change involed; - use kstrtobool() to replace strtobool() Documentation/ABI/stable/sysfs-block | 8 ++++-- block/blk-core.c | 27 ++++++++++++++++-- block/blk-merge.c | 3 ++ block/blk-mq-debugfs.c | 2 ++ block/blk-mq.c | 11 +++++++- block/blk-sysfs.c | 42 ++++++++++++++++++++++++++-- block/blk.h | 1 + block/genhd.c | 2 +- include/linux/blk-mq.h | 1 + include/linux/blkdev.h | 3 ++ 10 files changed, 91 insertions(+), 9 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b..79027bf2661a 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -358,8 +358,12 @@ What: /sys/block/<disk>/queue/iostats Date: January 2009 Contact: linux-block(a)vger.kernel.org Description: - [RW] This file is used to control (on/off) the iostats - accounting of the disk. + [RW] This file is used to control the iostats accounting of the + disk. If this value is 0, iostats accounting is disabled; If + this value is 1, iostats accounting is enabled, but io_ticks is + accounted by sampling and the result is not accurate; If this + value is 2, iostats accounting is enabled and io_ticks is + accounted precisely, but there will be slightly more overhead. What: /sys/block/<disk>/queue/logical_block_size diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..13a27d1d8540 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -71,6 +71,21 @@ static struct kmem_cache *blk_requestq_cachep; */ static struct workqueue_struct *kblockd_workqueue; +static bool precise_iostat; + +static int __init precise_iostat_setup(char *str) +{ + bool precise; + + if (!kstrtobool(str, &precise)) { + precise_iostat = precise; + pr_info("precise iostat %d\n", precise_iostat); + } + + return 1; +} +__setup("precise_iostat=", precise_iostat_setup); + /** * blk_queue_flag_set - atomically set a queue flag * @flag: flag to be set @@ -441,6 +456,8 @@ struct request_queue *blk_alloc_queue(int node_id) blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ; + if (precise_iostat) + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); return q; @@ -938,11 +955,15 @@ EXPORT_SYMBOL_GPL(iocb_bio_iopoll); void update_io_ticks(struct block_device *part, unsigned long now, bool end) { unsigned long stamp; + bool precise = blk_queue_precise_io_stat(part->bd_queue); again: stamp = READ_ONCE(part->bd_stamp); - if (unlikely(time_after(now, stamp))) { - if (likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) - __part_stat_add(part, io_ticks, end ? now - stamp : 1); + if (unlikely(time_after(now, stamp)) && + likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) { + if (end || (precise && part_in_flight(part))) + __part_stat_add(part, io_ticks, now - stamp); + else if (!precise) + __part_stat_add(part, io_ticks, 1); } if (part->bd_partno) { part = bdev_whole(part); diff --git a/block/blk-merge.c b/block/blk-merge.c index 65e75efa9bd3..5db8228c46fc 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -783,6 +783,9 @@ static void blk_account_io_merge_request(struct request *req) if (blk_do_io_stat(req)) { part_stat_lock(); part_stat_inc(req->part, merges[op_stat_group(req_op(req))]); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index aa7a1357c3e1..9ad108307344 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -86,6 +86,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(FAIL_IO), QUEUE_FLAG_NAME(NONROT), QUEUE_FLAG_NAME(IO_STAT), + QUEUE_FLAG_NAME(PRECISE_IO_STAT), QUEUE_FLAG_NAME(NOXMERGES), QUEUE_FLAG_NAME(ADD_RANDOM), QUEUE_FLAG_NAME(SYNCHRONOUS), @@ -254,6 +255,7 @@ static const char *const rqf_name[] = { RQF_NAME(FAILED), RQF_NAME(QUIET), RQF_NAME(IO_STAT), + RQF_NAME(PRECISE_IO_STAT), RQF_NAME(PM), RQF_NAME(HASHED), RQF_NAME(STATS), diff --git a/block/blk-mq.c b/block/blk-mq.c index dd7c9e3eca1b..498a6306cbb5 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -360,8 +360,11 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, if (data->flags & BLK_MQ_REQ_PM) data->rq_flags |= RQF_PM; - if (blk_queue_io_stat(q)) + if (blk_queue_io_stat(q)) { data->rq_flags |= RQF_IO_STAT; + if (blk_queue_precise_io_stat(q)) + data->rq_flags |= RQF_PRECISE_IO_STAT; + } rq->rq_flags = data->rq_flags; if (data->rq_flags & RQF_SCHED_TAGS) { @@ -994,6 +997,9 @@ static inline void blk_account_io_done(struct request *req, u64 now) update_io_ticks(req->part, jiffies, true); part_stat_inc(req->part, ios[sgrp]); part_stat_add(req->part, nsecs[sgrp], now - req->start_time_ns); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } @@ -1016,6 +1022,9 @@ static inline void blk_account_io_start(struct request *req) part_stat_lock(); update_io_ticks(req->part, jiffies, false); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_inc(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..e58b1574e023 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -303,7 +303,6 @@ queue_##name##_store(struct request_queue *q, const char *page, size_t count) \ QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1); QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0); -QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0); QUEUE_SYSFS_BIT_FNS(stable_writes, STABLE_WRITES, 0); #undef QUEUE_SYSFS_BIT_FNS @@ -473,6 +472,45 @@ static ssize_t queue_dax_show(struct request_queue *q, char *page) return queue_var_show(blk_queue_dax(q), page); } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + int val = 0; + + if (blk_queue_io_stat(q)) + val = blk_queue_precise_io_stat(q) ? 2 : 1; + + return queue_var_show(val, page); +} + +static ssize_t +queue_iostats_store(struct request_queue *q, const char *page, size_t count) +{ + unsigned long nr; + int ret = queue_var_store(&nr, page, count); + + if (ret < 0) + return ret; + + switch (nr) { + case 0: + blk_queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 1: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 2: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + default: + return -EINVAL; + } + + return count; +} + #define QUEUE_RO_ENTRY(_prefix, _name) \ static struct queue_sysfs_entry _prefix##_entry = { \ .attr = { .name = _name, .mode = 0444 }, \ @@ -494,6 +532,7 @@ QUEUE_RO_ENTRY(queue_max_segments, "max_segments"); QUEUE_RO_ENTRY(queue_max_integrity_segments, "max_integrity_segments"); QUEUE_RO_ENTRY(queue_max_segment_size, "max_segment_size"); QUEUE_RW_ENTRY(elv_iosched, "scheduler"); +QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RO_ENTRY(queue_logical_block_size, "logical_block_size"); QUEUE_RO_ENTRY(queue_physical_block_size, "physical_block_size"); @@ -539,7 +578,6 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { }; QUEUE_RW_ENTRY(queue_nonrot, "rotational"); -QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RW_ENTRY(queue_random, "add_random"); QUEUE_RW_ENTRY(queue_stable_writes, "stable_writes"); diff --git a/block/blk.h b/block/blk.h index 08a358bc0919..67915b04b3c1 100644 --- a/block/blk.h +++ b/block/blk.h @@ -344,6 +344,7 @@ static inline bool blk_do_io_stat(struct request *rq) } void update_io_ticks(struct block_device *part, unsigned long now, bool end); +unsigned int part_in_flight(struct block_device *part); static inline void req_set_nomerge(struct request_queue *q, struct request *req) { diff --git a/block/genhd.c b/block/genhd.c index 4a16a424f57d..b3ff653f3e50 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -118,7 +118,7 @@ static void part_stat_read_all(struct block_device *part, } } -static unsigned int part_in_flight(struct block_device *part) +unsigned int part_in_flight(struct block_device *part) { unsigned int inflight = 0; int cpu; diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 3d74f3e5b995..9dfee0644f9c 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -46,6 +46,7 @@ typedef __u32 __bitwise req_flags_t; #define RQF_QUIET ((__force req_flags_t)(1 << 11)) /* account into disk and partition IO statistics */ #define RQF_IO_STAT ((__force req_flags_t)(1 << 13)) +#define RQF_PRECISE_IO_STAT ((__force req_flags_t)(1 << 14)) /* runtime pm request */ #define RQF_PM ((__force req_flags_t)(1 << 15)) /* on IO scheduler merge hash */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9f3bcbcb156d..bea0b5fdac74 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -536,6 +536,7 @@ struct request_queue { #define QUEUE_FLAG_NONROT 6 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 7 /* do disk/partitions IO accounting */ +#define QUEUE_FLAG_PRECISE_IO_STAT 8 /* do disk/partitions IO accounting precisely */ #define QUEUE_FLAG_NOXMERGES 9 /* No extended merges */ #define QUEUE_FLAG_ADD_RANDOM 10 /* Contributes to random pool */ #define QUEUE_FLAG_SYNCHRONOUS 11 /* always completes in submit context */ @@ -576,6 +577,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); #define blk_queue_stable_writes(q) \ test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) +#define blk_queue_precise_io_stat(q) \ + test_bit(QUEUE_FLAG_PRECISE_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) -- 2.39.2

2 1

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 09 Jan '24

09 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

2 13

[PATCH V3 OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 355 +++++++++++++++++++++++++ 5 files changed, 371 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 66737e8c8673..677b4cc4668a 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6924,6 +6924,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index fcbef6c06587..c16cdb7b2596 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8120,6 +8120,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..d0aea022b68b --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry; + + dentry = d_find_alias(inode); + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit; + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + limit = READ_ONCE(buf_limit); + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + + ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long limit; + + ret = kstrtoul_from_user(buf, count, 10, &limit); + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

2 1

[PATCH OLK-6.6] fs/dcache.c: avoid panic while lockref of dentry overflow
by Zizhi Wo 09 Jan '24

09 Jan '24

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8JDP6 --------------------------- We use lockref for dentry reference without notice that so many negative dentry under one dir can lead to overflow of lockref. This can lead to system crash if we do this under root dir. Since there is not a perfect solution, we just limit max number of dentry count up to INT_MAX / 2. Also, it will cost a lot of time from INT_MAX / 2 to INT_MAX, so we no need to do this under protection of dentry lock. Also, we limit the FILES_MAX to INT_MAX / 2, since a lot open for same file can lead to overflow too. Changelog: v1->v2: add a function to do check / add a Macro to mean INT_MAX / 2 Signed-off-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- fs/dcache.c | 32 ++++++++++++++++++++++++++++---- fs/filescontrol.c | 2 +- include/linux/fs.h | 3 +++ 3 files changed, 32 insertions(+), 5 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 25ac74d30bff..7cdd8bbedd1c 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1834,6 +1834,18 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) return dentry; } +static inline bool d_forbid_overflow(struct dentry *dentry) +{ + if (unlikely(d_count(dentry) >= D_COUNT_MAX)) { + shrink_dcache_parent(dentry); + + if (d_count(dentry) >= D_COUNT_MAX) + return false; + } + + return true; +} + /** * d_alloc - allocate a dcache entry * @parent: parent of entry to allocate @@ -1845,9 +1857,15 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) */ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) { - struct dentry *dentry = __d_alloc(parent->d_sb, name); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = __d_alloc(parent->d_sb, name); if (!dentry) - return NULL; + goto out; + spin_lock(&parent->d_lock); /* * don't need child lock because it is not subject @@ -1857,7 +1875,7 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) dentry->d_parent = parent; list_add(&dentry->d_child, &parent->d_subdirs); spin_unlock(&parent->d_lock); - +out: return dentry; } EXPORT_SYMBOL(d_alloc); @@ -1870,11 +1888,17 @@ EXPORT_SYMBOL(d_alloc_anon); struct dentry *d_alloc_cursor(struct dentry * parent) { - struct dentry *dentry = d_alloc_anon(parent->d_sb); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = d_alloc_anon(parent->d_sb); if (dentry) { dentry->d_flags |= DCACHE_DENTRY_CURSOR; dentry->d_parent = dget(parent); } +out: return dentry; } diff --git a/fs/filescontrol.c b/fs/filescontrol.c index 610f13a36962..0947566b9119 100644 --- a/fs/filescontrol.c +++ b/fs/filescontrol.c @@ -27,7 +27,7 @@ #include <linux/sched/signal.h> #include <linux/module.h> -#define FILES_MAX ULONG_MAX +#define FILES_MAX D_COUNT_MAX #define FILES_MAX_STR "max" static bool no_acct; diff --git a/include/linux/fs.h b/include/linux/fs.h index fb5accebdcdf..67c2ac09e700 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -47,6 +47,9 @@ #include <asm/byteorder.h> #include <uapi/linux/fs.h> +#define D_COUNT_MAX (INT_MAX / 2) + + struct backing_dev_info; struct bdi_writeback; struct bio; -- 2.39.2

2 1

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 09 Jan '24

09 Jan '24

Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.34.1

2 2

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 09 Jan '24

09 Jan '24

Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.34.1

1 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 09 Jan '24

09 Jan '24

v2 -> v3 - fix code style and commit messages v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: add ETMEM feature CONFIG to mm/Kconfig etmem: add ETMEM scan feature CONFIG to mm/Kconfig mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

[PATCH OLK-6.6] openeuler_defconfig: set CONFIG_NODES_SHIFT to 8 for both x86_64/ARM64
by Liu Shixin 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UT5S CVE: NA -------------------------------- There is no extra bit in pageflags for new flag on x86_64. Since 256 nodes is enough for x86_64, reduce CONFIG_NODES_SHIFT to 8 to obtain two unused bits on x86_64. On arm64, 128 node is not enough, so raise CONFIG_NODES_SHIFT to 8. Signed-off-by: Liu Shixin <liushixin2(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- arch/x86/configs/openeuler_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 0f0d9b3d6367..f6d76aa7fd97 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -450,7 +450,7 @@ CONFIG_NR_CPUS=4096 CONFIG_HOTPLUG_CPU=y # CONFIG_ARM64_BOOTPARAM_HOTPLUG_CPU0 is not set CONFIG_NUMA=y -CONFIG_NODES_SHIFT=7 +CONFIG_NODES_SHIFT=8 # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 504de984c7be..6b39cf20f8c2 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -449,7 +449,7 @@ CONFIG_NUMA_AWARE_SPINLOCKS=y CONFIG_AMD_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NUMA_EMU=y -CONFIG_NODES_SHIFT=10 +CONFIG_NODES_SHIFT=8 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y # CONFIG_ARCH_MEMORY_PROBE is not set -- 2.25.1

2 3

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Lu Jialin 09 Jan '24

09 Jan '24

From: Guan Jing <guanjing6(a)huawei.com> infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 09 Jan '24

09 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-6.6 0/1] iommu: set CONFIG_SMMU_BYPASS_DEV=y
by zhangnaichuan 09 Jan '24

09 Jan '24

set CONFIG_SMMU_BYPASS_DEV=y in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+) -- 2.33.0

2 2

[PATCH V3 OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 355 +++++++++++++++++++++++++ 5 files changed, 371 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 66737e8c8673..677b4cc4668a 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6924,6 +6924,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index fcbef6c06587..c16cdb7b2596 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8120,6 +8120,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..d0aea022b68b --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry; + + dentry = d_find_alias(inode); + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit; + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + limit = READ_ONCE(buf_limit); + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + + ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long limit; + + ret = kstrtoul_from_user(buf, count, 10, &limit); + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

1 0

[PATCH OLK-6.6] fs/dcache.c: avoid panic while lockref of dentry overflow
by Zizhi Wo 09 Jan '24

09 Jan '24

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8JDP6 --------------------------- We use lockref for dentry reference without notice that so many negative dentry under one dir can lead to overflow of lockref. This can lead to system crash if we do this under root dir. Since there is not a perfect solution, we just limit max number of dentry count up to INT_MAX / 2. Also, it will cost a lot of time from INT_MAX / 2 to INT_MAX, so we no need to do this under protection of dentry lock. Also, we limit the FILES_MAX to INT_MAX / 2, since a lot open for same file can lead to overflow too. Changelog: v1->v2: add a function to do check / add a Macro to mean INT_MAX / 2 Signed-off-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- fs/dcache.c | 32 ++++++++++++++++++++++++++++---- fs/filescontrol.c | 2 +- include/linux/fs.h | 3 +++ 3 files changed, 32 insertions(+), 5 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 25ac74d30bff..7cdd8bbedd1c 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1834,6 +1834,18 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) return dentry; } +static inline bool d_forbid_overflow(struct dentry *dentry) +{ + if (unlikely(d_count(dentry) >= D_COUNT_MAX)) { + shrink_dcache_parent(dentry); + + if (d_count(dentry) >= D_COUNT_MAX) + return false; + } + + return true; +} + /** * d_alloc - allocate a dcache entry * @parent: parent of entry to allocate @@ -1845,9 +1857,15 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) */ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) { - struct dentry *dentry = __d_alloc(parent->d_sb, name); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = __d_alloc(parent->d_sb, name); if (!dentry) - return NULL; + goto out; + spin_lock(&parent->d_lock); /* * don't need child lock because it is not subject @@ -1857,7 +1875,7 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) dentry->d_parent = parent; list_add(&dentry->d_child, &parent->d_subdirs); spin_unlock(&parent->d_lock); - +out: return dentry; } EXPORT_SYMBOL(d_alloc); @@ -1870,11 +1888,17 @@ EXPORT_SYMBOL(d_alloc_anon); struct dentry *d_alloc_cursor(struct dentry * parent) { - struct dentry *dentry = d_alloc_anon(parent->d_sb); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = d_alloc_anon(parent->d_sb); if (dentry) { dentry->d_flags |= DCACHE_DENTRY_CURSOR; dentry->d_parent = dget(parent); } +out: return dentry; } diff --git a/fs/filescontrol.c b/fs/filescontrol.c index 610f13a36962..0947566b9119 100644 --- a/fs/filescontrol.c +++ b/fs/filescontrol.c @@ -27,7 +27,7 @@ #include <linux/sched/signal.h> #include <linux/module.h> -#define FILES_MAX ULONG_MAX +#define FILES_MAX D_COUNT_MAX #define FILES_MAX_STR "max" static bool no_acct; diff --git a/include/linux/fs.h b/include/linux/fs.h index fb5accebdcdf..67c2ac09e700 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -47,6 +47,9 @@ #include <asm/byteorder.h> #include <uapi/linux/fs.h> +#define D_COUNT_MAX (INT_MAX / 2) + + struct backing_dev_info; struct bdi_writeback; struct bio; -- 2.39.2

1 0

[PATCH OLK-6.6] hfs: fix null-ptr-deref in hfs_find_init()
by Long Li 09 Jan '24

09 Jan '24

From: Yang Yingliang <yangyingliang(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8URA4 CVE: CVE-2018-12928 -------------------------------- It will cause a null-ptr-deref in hfs_find_init() in fuzz test. [ 107.092729] hfs: continuing without an alternate MDB [ 107.097632] general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI [ 107.104679] KASAN: null-ptr-deref in range [0x0000000000000040-0x0000000000000047] [ 107.109100] CPU: 0 PID: 379 Comm: hfs_inject Not tainted 5.7.0-rc7-00001-g24627f5f2973 #897 [ 107.114142] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 107.121095] RIP: 0010:hfs_find_init+0x72/0x170 [ 107.123609] Code: c1 ea 03 80 3c 02 00 0f 85 e6 00 00 00 4c 8d 65 40 48 c7 43 18 00 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e a5 00 00 00 8b 45 40 be c0 0c [ 107.134660] RSP: 0018:ffff88810291f3f8 EFLAGS: 00010202 [ 107.137897] RAX: dffffc0000000000 RBX: ffff88810291f468 RCX: 1ffff110175cdf05 [ 107.141874] RDX: 0000000000000008 RSI: ffff88810291f468 RDI: ffff88810291f480 [ 107.145844] RBP: 0000000000000000 R08: 0000000000000000 R09: ffffed1020381013 [ 107.149431] R10: ffff88810291f500 R11: ffffed1020381012 R12: 0000000000000040 [ 107.152315] R13: 0000000000000000 R14: ffff888101c0814a R15: ffff88810291f468 [ 107.155464] FS: 00000000009ea880(0000) GS:ffff88810c600000(0000) knlGS:0000000000000000 [ 107.159795] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 107.162987] CR2: 00005605a19dd284 CR3: 0000000103a0c006 CR4: 0000000000020ef0 [ 107.166665] Call Trace: [ 107.167969] ? find_held_lock+0x33/0x1c0 [ 107.169972] hfs_ext_read_extent+0x16b/0xb00 [ 107.172092] ? create_page_buffers+0x14e/0x1b0 [ 107.174303] ? hfs_free_extents+0x280/0x280 [ 107.176437] ? lock_downgrade+0x730/0x730 [ 107.178272] hfs_get_block+0x496/0x8a0 [ 107.179972] block_read_full_page+0x241/0x8d0 [ 107.181971] ? hfs_extend_file+0xae0/0xae0 [ 107.183814] ? end_buffer_async_read_io+0x10/0x10 [ 107.185954] ? add_to_page_cache_lru+0x13f/0x1f0 [ 107.188006] ? add_to_page_cache_locked+0x10/0x10 [ 107.190175] do_read_cache_page+0xc6a/0x1180 [ 107.192096] ? generic_file_read_iter+0x4c0/0x4c0 [ 107.194234] ? hfs_btree_open+0x408/0x1000 [ 107.196068] ? lock_downgrade+0x730/0x730 [ 107.197926] ? wake_bit_function+0x180/0x180 [ 107.199845] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.201895] hfs_btree_open+0x455/0x1000 [ 107.203479] hfs_mdb_get+0x122c/0x1ae8 [ 107.205065] ? hfs_mdb_put+0x350/0x350 [ 107.206590] ? queue_work_node+0x260/0x260 [ 107.208309] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 107.210227] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.212144] ? lockdep_init_map_waits+0x267/0x7c0 [ 107.213979] hfs_fill_super+0x9ba/0x1280 [ 107.215444] ? bdev_name.isra.9+0xf1/0x2b0 [ 107.217028] ? hfs_remount+0x190/0x190 [ 107.218428] ? pointer+0x5da/0x710 [ 107.219745] ? file_dentry_name+0xf0/0xf0 [ 107.221262] ? mount_bdev+0xd1/0x330 [ 107.222592] ? vsnprintf+0x7bd/0x1250 [ 107.224007] ? pointer+0x710/0x710 [ 107.225332] ? down_write+0xe5/0x160 [ 107.226698] ? hfs_remount+0x190/0x190 [ 107.228120] ? snprintf+0x91/0xc0 [ 107.229388] ? vsprintf+0x10/0x10 [ 107.230628] ? sget+0x3af/0x4a0 [ 107.231848] ? hfs_remount+0x190/0x190 [ 107.233300] mount_bdev+0x26e/0x330 [ 107.234611] ? hfs_statfs+0x540/0x540 [ 107.236015] legacy_get_tree+0x101/0x1f0 [ 107.237431] ? security_capable+0x58/0x90 [ 107.238832] vfs_get_tree+0x89/0x2d0 [ 107.240082] ? ns_capable_common+0x5c/0xd0 [ 107.241521] do_mount+0xd8a/0x1720 [ 107.242727] ? lock_downgrade+0x730/0x730 [ 107.244116] ? copy_mount_string+0x20/0x20 [ 107.245557] ? _copy_from_user+0xbe/0x100 [ 107.246967] ? memdup_user+0x47/0x70 [ 107.248212] __x64_sys_mount+0x162/0x1b0 [ 107.249537] do_syscall_64+0xa5/0x4f0 [ 107.250742] entry_SYSCALL_64_after_hwframe+0x49/0xb3 [ 107.252369] RIP: 0033:0x44e8ea [ 107.253360] Code: 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 [ 107.259240] RSP: 002b:00007ffd910e4c28 EFLAGS: 00000207 ORIG_RAX: 00000000000000a5 [ 107.261668] RAX: ffffffffffffffda RBX: 0000000000400400 RCX: 000000000044e8ea [ 107.263920] RDX: 000000000049321e RSI: 0000000000493222 RDI: 00007ffd910e4d00 [ 107.266177] RBP: 00007ffd910e5d10 R08: 0000000000000000 R09: 000000000000000a [ 107.268451] R10: 0000000000000001 R11: 0000000000000207 R12: 0000000000401c40 [ 107.270721] R13: 0000000000000000 R14: 00000000006ba018 R15: 0000000000000000 [ 107.273025] Modules linked in: [ 107.274029] Dumping ftrace buffer: [ 107.275121] (ftrace buffer empty) [ 107.276370] ---[ end trace c5e0b9d684f3570e ]--- We need check tree in hfs_find_init(). https://lore.kernel.org/linux-fsdevel/20180419024358.GA5215@bombadil.infrad… https://marc.info/?l=linux-fsdevel&m=152406881024567&w=2 References: CVE-2018-12928 Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/hfs/bfind.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/hfs/bfind.c b/fs/hfs/bfind.c index ef9498a6e88a..ae44c8fa86ec 100644 --- a/fs/hfs/bfind.c +++ b/fs/hfs/bfind.c @@ -16,6 +16,8 @@ int hfs_find_init(struct hfs_btree *tree, struct hfs_find_data *fd) { void *ptr; + if (!tree) + return -EINVAL; fd->tree = tree; fd->bnode = NULL; ptr = kmalloc(tree->max_key_len * 2 + 4, GFP_KERNEL); -- 2.31.1

1 0

[PATCH OLK-6.6] sched/smt: fix unbalance sched_smt_present dec/inc
by Xia Fukun 09 Jan '24

09 Jan '24

From: Yang Yingliang <yangyingliang(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8UR4U CVE: NA -------------------------------- If cpuset_cpu_inactive() fails in sched_cpu_deactivate(), the cpu offline failed, but sched_smt_present is decreased before calling sched_cpu_deactivate, it leads unbalance dec/inc, so fix it by increasing sched_smt_present in the error path. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/sched/core.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 7a0997e7e136..adecea9c607d 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -9792,6 +9792,10 @@ int sched_cpu_deactivate(unsigned int cpu) ret = cpuset_cpu_inactive(cpu); if (ret) { balance_push_set(cpu, false); +#ifdef CONFIG_SCHED_SMT + if (cpumask_weight(cpu_smt_mask(cpu)) == 2) + static_branch_inc_cpuslocked(&sched_smt_present); +#endif set_cpu_active(cpu, true); sched_update_numa(cpu, true); return ret; -- 2.34.1

1 0

[PATCH OLK-6.6 0/1] iommu: set CONFIG_SMMU_BYPASS_DEV=y
by zhangnaichuan 09 Jan '24

09 Jan '24

set CONFIG_SMMU_BYPASS_DEV=y in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 1 + 1 file changed, 1 insertion(+) -- 2.33.0

1 0

[PATCH OLK-6.6 v5 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 09 Jan '24

09 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. Li Lingfeng (5): block: Count writers and mounters regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 19 ++++++++ block/bdev.c | 100 +++++++++++++++++++++++++++++++++----- include/linux/blk_types.h | 1 + 3 files changed, 107 insertions(+), 13 deletions(-) -- 2.31.1

2 8

[PATCH OLK-6.6 v2] block: support to account io_ticks precisely
by Yu Kuai 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8RIME CVE: NA ----------------------------------------------- Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. In order to account io_ticks precisely, update_io_ticks() must know if there are IO inflight already, and this requires overhead slightly, hence precise io accounting is disabled by default, and user can enable it through sysfs entry. Noted that for rq-based devcie, part_stat_local_inc/dec() and part_in_flight() is used to track inflight instead of iterating tags, which is not supposed to be used in fast path because 'tags->lock' is grabbed in blk_mq_find_and_get_req(). Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Changes in v2: - some minor code changes, no functional change involed; Documentation/ABI/stable/sysfs-block | 8 ++++-- block/blk-core.c | 27 ++++++++++++++++-- block/blk-merge.c | 3 ++ block/blk-mq-debugfs.c | 2 ++ block/blk-mq.c | 11 +++++++- block/blk-sysfs.c | 42 ++++++++++++++++++++++++++-- block/blk.h | 1 + block/genhd.c | 2 +- include/linux/blk-mq.h | 1 + include/linux/blkdev.h | 3 ++ 10 files changed, 91 insertions(+), 9 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b..79027bf2661a 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -358,8 +358,12 @@ What: /sys/block/<disk>/queue/iostats Date: January 2009 Contact: linux-block(a)vger.kernel.org Description: - [RW] This file is used to control (on/off) the iostats - accounting of the disk. + [RW] This file is used to control the iostats accounting of the + disk. If this value is 0, iostats accounting is disabled; If + this value is 1, iostats accounting is enabled, but io_ticks is + accounted by sampling and the result is not accurate; If this + value is 2, iostats accounting is enabled and io_ticks is + accounted precisely, but there will be slightly more overhead. What: /sys/block/<disk>/queue/logical_block_size diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..13a27d1d8540 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -71,6 +71,21 @@ static struct kmem_cache *blk_requestq_cachep; */ static struct workqueue_struct *kblockd_workqueue; +static bool precise_iostat; + +static int __init precise_iostat_setup(char *str) +{ + bool precise; + + if (!strtobool(str, &precise)) { + precise_iostat = precise; + pr_info("precise iostat %d\n", precise_iostat); + } + + return 1; +} +__setup("precise_iostat=", precise_iostat_setup); + /** * blk_queue_flag_set - atomically set a queue flag * @flag: flag to be set @@ -441,6 +456,8 @@ struct request_queue *blk_alloc_queue(int node_id) blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ; + if (precise_iostat) + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); return q; @@ -938,11 +955,15 @@ EXPORT_SYMBOL_GPL(iocb_bio_iopoll); void update_io_ticks(struct block_device *part, unsigned long now, bool end) { unsigned long stamp; + bool precise = blk_queue_precise_io_stat(part->bd_queue); again: stamp = READ_ONCE(part->bd_stamp); - if (unlikely(time_after(now, stamp))) { - if (likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) - __part_stat_add(part, io_ticks, end ? now - stamp : 1); + if (unlikely(time_after(now, stamp)) && + likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) { + if (end || (precise && part_in_flight(part))) + __part_stat_add(part, io_ticks, now - stamp); + else if (!precise) + __part_stat_add(part, io_ticks, 1); } if (part->bd_partno) { part = bdev_whole(part); diff --git a/block/blk-merge.c b/block/blk-merge.c index 65e75efa9bd3..5db8228c46fc 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -783,6 +783,9 @@ static void blk_account_io_merge_request(struct request *req) if (blk_do_io_stat(req)) { part_stat_lock(); part_stat_inc(req->part, merges[op_stat_group(req_op(req))]); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index aa7a1357c3e1..9ad108307344 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -86,6 +86,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(FAIL_IO), QUEUE_FLAG_NAME(NONROT), QUEUE_FLAG_NAME(IO_STAT), + QUEUE_FLAG_NAME(PRECISE_IO_STAT), QUEUE_FLAG_NAME(NOXMERGES), QUEUE_FLAG_NAME(ADD_RANDOM), QUEUE_FLAG_NAME(SYNCHRONOUS), @@ -254,6 +255,7 @@ static const char *const rqf_name[] = { RQF_NAME(FAILED), RQF_NAME(QUIET), RQF_NAME(IO_STAT), + RQF_NAME(PRECISE_IO_STAT), RQF_NAME(PM), RQF_NAME(HASHED), RQF_NAME(STATS), diff --git a/block/blk-mq.c b/block/blk-mq.c index dd7c9e3eca1b..498a6306cbb5 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -360,8 +360,11 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, if (data->flags & BLK_MQ_REQ_PM) data->rq_flags |= RQF_PM; - if (blk_queue_io_stat(q)) + if (blk_queue_io_stat(q)) { data->rq_flags |= RQF_IO_STAT; + if (blk_queue_precise_io_stat(q)) + data->rq_flags |= RQF_PRECISE_IO_STAT; + } rq->rq_flags = data->rq_flags; if (data->rq_flags & RQF_SCHED_TAGS) { @@ -994,6 +997,9 @@ static inline void blk_account_io_done(struct request *req, u64 now) update_io_ticks(req->part, jiffies, true); part_stat_inc(req->part, ios[sgrp]); part_stat_add(req->part, nsecs[sgrp], now - req->start_time_ns); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } @@ -1016,6 +1022,9 @@ static inline void blk_account_io_start(struct request *req) part_stat_lock(); update_io_ticks(req->part, jiffies, false); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_inc(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..e58b1574e023 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -303,7 +303,6 @@ queue_##name##_store(struct request_queue *q, const char *page, size_t count) \ QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1); QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0); -QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0); QUEUE_SYSFS_BIT_FNS(stable_writes, STABLE_WRITES, 0); #undef QUEUE_SYSFS_BIT_FNS @@ -473,6 +472,45 @@ static ssize_t queue_dax_show(struct request_queue *q, char *page) return queue_var_show(blk_queue_dax(q), page); } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + int val = 0; + + if (blk_queue_io_stat(q)) + val = blk_queue_precise_io_stat(q) ? 2 : 1; + + return queue_var_show(val, page); +} + +static ssize_t +queue_iostats_store(struct request_queue *q, const char *page, size_t count) +{ + unsigned long nr; + int ret = queue_var_store(&nr, page, count); + + if (ret < 0) + return ret; + + switch (nr) { + case 0: + blk_queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 1: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 2: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + default: + return -EINVAL; + } + + return count; +} + #define QUEUE_RO_ENTRY(_prefix, _name) \ static struct queue_sysfs_entry _prefix##_entry = { \ .attr = { .name = _name, .mode = 0444 }, \ @@ -494,6 +532,7 @@ QUEUE_RO_ENTRY(queue_max_segments, "max_segments"); QUEUE_RO_ENTRY(queue_max_integrity_segments, "max_integrity_segments"); QUEUE_RO_ENTRY(queue_max_segment_size, "max_segment_size"); QUEUE_RW_ENTRY(elv_iosched, "scheduler"); +QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RO_ENTRY(queue_logical_block_size, "logical_block_size"); QUEUE_RO_ENTRY(queue_physical_block_size, "physical_block_size"); @@ -539,7 +578,6 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { }; QUEUE_RW_ENTRY(queue_nonrot, "rotational"); -QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RW_ENTRY(queue_random, "add_random"); QUEUE_RW_ENTRY(queue_stable_writes, "stable_writes"); diff --git a/block/blk.h b/block/blk.h index 08a358bc0919..67915b04b3c1 100644 --- a/block/blk.h +++ b/block/blk.h @@ -344,6 +344,7 @@ static inline bool blk_do_io_stat(struct request *rq) } void update_io_ticks(struct block_device *part, unsigned long now, bool end); +unsigned int part_in_flight(struct block_device *part); static inline void req_set_nomerge(struct request_queue *q, struct request *req) { diff --git a/block/genhd.c b/block/genhd.c index 4a16a424f57d..b3ff653f3e50 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -118,7 +118,7 @@ static void part_stat_read_all(struct block_device *part, } } -static unsigned int part_in_flight(struct block_device *part) +unsigned int part_in_flight(struct block_device *part) { unsigned int inflight = 0; int cpu; diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 3d74f3e5b995..9dfee0644f9c 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -46,6 +46,7 @@ typedef __u32 __bitwise req_flags_t; #define RQF_QUIET ((__force req_flags_t)(1 << 11)) /* account into disk and partition IO statistics */ #define RQF_IO_STAT ((__force req_flags_t)(1 << 13)) +#define RQF_PRECISE_IO_STAT ((__force req_flags_t)(1 << 14)) /* runtime pm request */ #define RQF_PM ((__force req_flags_t)(1 << 15)) /* on IO scheduler merge hash */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9f3bcbcb156d..bea0b5fdac74 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -536,6 +536,7 @@ struct request_queue { #define QUEUE_FLAG_NONROT 6 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 7 /* do disk/partitions IO accounting */ +#define QUEUE_FLAG_PRECISE_IO_STAT 8 /* do disk/partitions IO accounting precisely */ #define QUEUE_FLAG_NOXMERGES 9 /* No extended merges */ #define QUEUE_FLAG_ADD_RANDOM 10 /* Contributes to random pool */ #define QUEUE_FLAG_SYNCHRONOUS 11 /* always completes in submit context */ @@ -576,6 +577,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); #define blk_queue_stable_writes(q) \ test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) +#define blk_queue_precise_io_stat(q) \ + test_bit(QUEUE_FLAG_PRECISE_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) -- 2.39.2

1 0

[PATCH OLK-6.6] fs/dcache.c: avoid panic while lockref of dentry overflow
by Zizhi Wo 09 Jan '24

09 Jan '24

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8JDP6 --------------------------- We use lockref for dentry reference without notice that so many negative dentry under one dir can lead to overflow of lockref. This can lead to system crash if we do this under root dir. Since there is not a perfect solution, we just limit max number of dentry count up to INT_MAX / 2. Also, it will cost a lot of time from INT_MAX / 2 to INT_MAX, so we no need to do this under protection of dentry lock. Also, we limit the FILES_MAX to INT_MAX / 2, since a lot open for same file can lead to overflow too. Changelog: v1->v2: add a function to do check / add a Macro to mean INT_MAX / 2 Signed-off-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- fs/dcache.c | 32 ++++++++++++++++++++++++++++---- fs/filescontrol.c | 2 +- include/linux/fs.h | 3 +++ 3 files changed, 32 insertions(+), 5 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 25ac74d30bff..7cdd8bbedd1c 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1834,6 +1834,18 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) return dentry; } +static inline bool d_forbid_overflow(struct dentry *dentry) +{ + if (unlikely(d_count(dentry) >= D_COUNT_MAX)) { + shrink_dcache_parent(dentry); + + if (d_count(dentry) >= D_COUNT_MAX) + return false; + } + + return true; +} + /** * d_alloc - allocate a dcache entry * @parent: parent of entry to allocate @@ -1845,9 +1857,15 @@ static struct dentry *__d_alloc(struct super_block *sb, const struct qstr *name) */ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) { - struct dentry *dentry = __d_alloc(parent->d_sb, name); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = __d_alloc(parent->d_sb, name); if (!dentry) - return NULL; + goto out; + spin_lock(&parent->d_lock); /* * don't need child lock because it is not subject @@ -1857,7 +1875,7 @@ struct dentry *d_alloc(struct dentry * parent, const struct qstr *name) dentry->d_parent = parent; list_add(&dentry->d_child, &parent->d_subdirs); spin_unlock(&parent->d_lock); - +out: return dentry; } EXPORT_SYMBOL(d_alloc); @@ -1870,11 +1888,17 @@ EXPORT_SYMBOL(d_alloc_anon); struct dentry *d_alloc_cursor(struct dentry * parent) { - struct dentry *dentry = d_alloc_anon(parent->d_sb); + struct dentry *dentry = NULL; + + if (unlikely(!d_forbid_overflow(parent))) + goto out; + + dentry = d_alloc_anon(parent->d_sb); if (dentry) { dentry->d_flags |= DCACHE_DENTRY_CURSOR; dentry->d_parent = dget(parent); } +out: return dentry; } diff --git a/fs/filescontrol.c b/fs/filescontrol.c index 610f13a36962..0947566b9119 100644 --- a/fs/filescontrol.c +++ b/fs/filescontrol.c @@ -27,7 +27,7 @@ #include <linux/sched/signal.h> #include <linux/module.h> -#define FILES_MAX ULONG_MAX +#define FILES_MAX D_COUNT_MAX #define FILES_MAX_STR "max" static bool no_acct; diff --git a/include/linux/fs.h b/include/linux/fs.h index fb5accebdcdf..67c2ac09e700 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -47,6 +47,9 @@ #include <asm/byteorder.h> #include <uapi/linux/fs.h> +#define D_COUNT_MAX (INT_MAX / 2) + + struct backing_dev_info; struct bdi_writeback; struct bio; -- 2.39.2

1 0

[PATCH RESEND OLK-6.6] kabi: reserve space for bpf related structures
by Pu Lehui 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOP9 -------------------------------- reserve space for bpf related structures. Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 115 +++++++++++++++++++++++++++++++++++ include/linux/bpf_verifier.h | 36 +++++++++++ include/uapi/linux/bpf.h | 16 +++++ 3 files changed, 167 insertions(+) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 392f581af2ce..f37e681cd4f5 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -29,6 +29,7 @@ #include <linux/rcupdate_trace.h> #include <linux/static_call.h> #include <linux/memcontrol.h> +#include <linux/kabi.h> struct bpf_verifier_env; struct bpf_verifier_log; @@ -163,6 +164,11 @@ struct bpf_map_ops { u64 (*map_mem_usage)(const struct bpf_map *map); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* BTF id of struct allocated by map_alloc */ int *map_btf_id; @@ -288,6 +294,11 @@ struct bpf_map { bool bypass_spec_v1; bool frozen; /* write-once; write-protected by freeze_mutex */ s64 __percpu *elem_count; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static inline const char *btf_field_type_name(enum btf_field_type type) @@ -664,6 +675,13 @@ enum bpf_type_flag { /* DYNPTR points to xdp_buff */ DYNPTR_TYPE_XDP = BIT(16 + BPF_BASE_TYPE_BITS), +#ifdef CONFIG_KABI_RESERVE + BPF_TYPE_FLAG_RESERVE_1 = BIT(17 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_2 = BIT(18 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_3 = BIT(19 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_4 = BIT(20 + BPF_BASE_TYPE_BITS), +#endif + __BPF_TYPE_FLAG_MAX, __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1, }; @@ -730,6 +748,13 @@ enum bpf_arg_type { /* Pointer to valid memory of size known at compile time. */ ARG_PTR_TO_FIXED_SIZE_MEM = MEM_FIXED_SIZE | ARG_PTR_TO_MEM, +#ifdef CONFIG_KABI_RESERVE + BPF_ARG_TYPE_RESERVE_1, + BPF_ARG_TYPE_RESERVE_2, + BPF_ARG_TYPE_RESERVE_3, + BPF_ARG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -760,6 +785,13 @@ enum bpf_return_type { RET_PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID, RET_PTR_TO_BTF_ID_TRUSTED = PTR_TRUSTED | RET_PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_RET_TYPE_RESERVE_1, + BPF_RET_TYPE_RESERVE_2, + BPF_RET_TYPE_RESERVE_3, + BPF_RET_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -807,6 +839,9 @@ struct bpf_func_proto { }; int *ret_btf_id; /* return value btf_id */ bool (*allowed)(const struct bpf_prog *prog); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* bpf_context is intentionally undefined structure. Pointer to bpf_context is @@ -875,6 +910,13 @@ enum bpf_reg_type { PTR_TO_TCP_SOCK_OR_NULL = PTR_MAYBE_NULL | PTR_TO_TCP_SOCK, PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_REG_TYPE_RESERVE_1, + BPF_REG_TYPE_RESERVE_2, + BPF_REG_TYPE_RESERVE_3, + BPF_REG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -895,6 +937,9 @@ struct bpf_insn_access_aux { }; }; struct bpf_verifier_log *log; /* for verbose logs */ + + KABI_RESERVE(1) + KABI_RESERVE(2) }; static inline void @@ -942,6 +987,11 @@ struct bpf_verifier_ops { int (*btf_struct_access)(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_prog_offload_ops { @@ -1121,6 +1171,9 @@ struct bpf_tramp_image { struct rcu_head rcu; struct work_struct work; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_trampoline { @@ -1149,6 +1202,11 @@ struct bpf_trampoline { /* Executable image of trampoline */ struct bpf_tramp_image *cur_image; struct module *mod; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_attach_target_info { @@ -1180,6 +1238,11 @@ struct bpf_dispatcher { struct static_call_key *sc_key; void *sc_tramp; #endif + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func( @@ -1339,6 +1402,9 @@ static inline bool bpf_prog_has_trampoline(const struct bpf_prog *prog) struct bpf_func_info_aux { u16 linkage; bool unreliable; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; enum bpf_jit_poke_reason { @@ -1361,6 +1427,9 @@ struct bpf_jit_poke_descriptor { u8 adj_off; u16 reason; u32 insn_idx; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* reg_type info for ctx arguments */ @@ -1368,6 +1437,9 @@ struct bpf_ctx_arg_aux { u32 offset; enum bpf_reg_type reg_type; u32 btf_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct btf_mod_pair { @@ -1465,6 +1537,15 @@ struct bpf_prog_aux { struct work_struct work; struct rcu_head rcu; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; struct bpf_prog { @@ -1499,6 +1580,11 @@ struct bpf_prog { DECLARE_FLEX_ARRAY(struct sock_filter, insns); DECLARE_FLEX_ARRAY(struct bpf_insn, insnsi); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_array_aux { @@ -1507,6 +1593,9 @@ struct bpf_array_aux { struct bpf_map *map; struct mutex poke_mutex; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link { @@ -1516,6 +1605,9 @@ struct bpf_link { const struct bpf_link_ops *ops; struct bpf_prog *prog; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link_ops { @@ -1529,12 +1621,18 @@ struct bpf_link_ops { struct bpf_link_info *info); int (*update_map)(struct bpf_link *link, struct bpf_map *new_map, struct bpf_map *old_map); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_tramp_link { struct bpf_link link; struct hlist_node tramp_hlist; u64 cookie; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_shim_tramp_link { @@ -1554,6 +1652,9 @@ struct bpf_link_primer { struct file *file; int fd; u32 id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_struct_ops_value; @@ -1626,6 +1727,11 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; u32 type_id; u32 value_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #if defined(CONFIG_BPF_JIT) && defined(CONFIG_BPF_SYSCALL) @@ -1727,6 +1833,9 @@ struct bpf_array { DECLARE_FLEX_ARRAY(void *, ptrs) __aligned(8); DECLARE_FLEX_ARRAY(void __percpu *, pptrs) __aligned(8); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */ @@ -2222,6 +2331,9 @@ struct bpf_iter_aux_info { enum bpf_iter_task_type type; u32 pid; } task; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, @@ -2252,6 +2364,9 @@ struct bpf_iter_reg { u32 feature; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_iter_meta { diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index b6e58dab8e27..78ad34886e17 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -8,6 +8,7 @@ #include <linux/btf.h> /* for struct btf and btf_id() */ #include <linux/filter.h> /* for MAX_BPF_STACK */ #include <linux/tnum.h> +#include <linux/kabi.h> /* Maximum variable offset umax_value permitted when resolving memory accesses. * In practice this is far bigger than any realistic pointer offset; this limit @@ -225,6 +226,11 @@ struct bpf_reg_state { enum bpf_reg_liveness live; /* if (!precise && SCALAR_VALUE) min/max/tnum don't affect safety */ bool precise; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; enum bpf_stack_slot_type { @@ -273,6 +279,11 @@ struct bpf_reference_state { * exiting a callback function. */ int callback_ref; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* state of the program: @@ -306,6 +317,11 @@ struct bpf_func_state { struct bpf_reference_state *refs; int allocated_stack; struct bpf_stack_state *stack; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_idx_pair { @@ -383,6 +399,11 @@ struct bpf_verifier_state { */ struct bpf_idx_pair *jmp_history; u32 jmp_history_cnt; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define bpf_get_spilled_reg(slot, frame) \ @@ -490,6 +511,11 @@ struct bpf_insn_aux_data { * this instruction, regardless of any heuristics */ bool force_checkpoint; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define MAX_USED_MAPS 64 /* max number of maps accessed by one eBPF program */ @@ -541,6 +567,11 @@ struct bpf_subprog_info { bool tail_call_reachable; bool has_ld_abs; bool is_async_cb; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_verifier_env; @@ -640,6 +671,11 @@ struct bpf_verifier_env { * e.g., in reg_type_str() to generate reg_type string */ char tmp_str_buf[TMP_STR_BUF_LEN]; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; __printf(2, 0) void bpf_verifier_vlog(struct bpf_verifier_log *log, diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4924f0cde1bc..d0171d5461a5 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -944,6 +944,10 @@ enum bpf_map_type { BPF_MAP_TYPE_BLOOM_FILTER, BPF_MAP_TYPE_USER_RINGBUF, BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_RESERVE_1, + BPF_MAP_TYPE_RESERVE_2, + BPF_MAP_TYPE_RESERVE_3, + BPF_MAP_TYPE_RESERVE_4, }; /* Note that tracing related programs such as @@ -988,6 +992,10 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ BPF_PROG_TYPE_NETFILTER, + BPF_PROG_TYPE_RESERVE_1, + BPF_PROG_TYPE_RESERVE_2, + BPF_PROG_TYPE_RESERVE_3, + BPF_PROG_TYPE_RESERVE_4, }; enum bpf_attach_type { @@ -1040,6 +1048,10 @@ enum bpf_attach_type { BPF_TCX_INGRESS, BPF_TCX_EGRESS, BPF_TRACE_UPROBE_MULTI, + BPF_ATTACH_TYPE_RESERVE_1, + BPF_ATTACH_TYPE_RESERVE_2, + BPF_ATTACH_TYPE_RESERVE_3, + BPF_ATTACH_TYPE_RESERVE_4, __MAX_BPF_ATTACH_TYPE }; @@ -1059,6 +1071,10 @@ enum bpf_link_type { BPF_LINK_TYPE_NETFILTER = 10, BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_RESERVE_1 = 13, + BPF_LINK_TYPE_RESERVE_2 = 14, + BPF_LINK_TYPE_RESERVE_3 = 15, + BPF_LINK_TYPE_RESERVE_4 = 16, MAX_BPF_LINK_TYPE, }; -- 2.34.1

1 0

[PATCH OLK-6.6] kabi: reserve space for bpf related structures
by Pu Lehui 09 Jan '24

09 Jan '24

From: Pu Lehui <pulehui(a)huaweicloud.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOP9 -------------------------------- reserve space for bpf related structures. Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 115 +++++++++++++++++++++++++++++++++++ include/linux/bpf_verifier.h | 36 +++++++++++ include/uapi/linux/bpf.h | 16 +++++ 3 files changed, 167 insertions(+) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 392f581af2ce..f37e681cd4f5 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -29,6 +29,7 @@ #include <linux/rcupdate_trace.h> #include <linux/static_call.h> #include <linux/memcontrol.h> +#include <linux/kabi.h> struct bpf_verifier_env; struct bpf_verifier_log; @@ -163,6 +164,11 @@ struct bpf_map_ops { u64 (*map_mem_usage)(const struct bpf_map *map); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* BTF id of struct allocated by map_alloc */ int *map_btf_id; @@ -288,6 +294,11 @@ struct bpf_map { bool bypass_spec_v1; bool frozen; /* write-once; write-protected by freeze_mutex */ s64 __percpu *elem_count; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static inline const char *btf_field_type_name(enum btf_field_type type) @@ -664,6 +675,13 @@ enum bpf_type_flag { /* DYNPTR points to xdp_buff */ DYNPTR_TYPE_XDP = BIT(16 + BPF_BASE_TYPE_BITS), +#ifdef CONFIG_KABI_RESERVE + BPF_TYPE_FLAG_RESERVE_1 = BIT(17 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_2 = BIT(18 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_3 = BIT(19 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_4 = BIT(20 + BPF_BASE_TYPE_BITS), +#endif + __BPF_TYPE_FLAG_MAX, __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1, }; @@ -730,6 +748,13 @@ enum bpf_arg_type { /* Pointer to valid memory of size known at compile time. */ ARG_PTR_TO_FIXED_SIZE_MEM = MEM_FIXED_SIZE | ARG_PTR_TO_MEM, +#ifdef CONFIG_KABI_RESERVE + BPF_ARG_TYPE_RESERVE_1, + BPF_ARG_TYPE_RESERVE_2, + BPF_ARG_TYPE_RESERVE_3, + BPF_ARG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -760,6 +785,13 @@ enum bpf_return_type { RET_PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID, RET_PTR_TO_BTF_ID_TRUSTED = PTR_TRUSTED | RET_PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_RET_TYPE_RESERVE_1, + BPF_RET_TYPE_RESERVE_2, + BPF_RET_TYPE_RESERVE_3, + BPF_RET_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -807,6 +839,9 @@ struct bpf_func_proto { }; int *ret_btf_id; /* return value btf_id */ bool (*allowed)(const struct bpf_prog *prog); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* bpf_context is intentionally undefined structure. Pointer to bpf_context is @@ -875,6 +910,13 @@ enum bpf_reg_type { PTR_TO_TCP_SOCK_OR_NULL = PTR_MAYBE_NULL | PTR_TO_TCP_SOCK, PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_REG_TYPE_RESERVE_1, + BPF_REG_TYPE_RESERVE_2, + BPF_REG_TYPE_RESERVE_3, + BPF_REG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -895,6 +937,9 @@ struct bpf_insn_access_aux { }; }; struct bpf_verifier_log *log; /* for verbose logs */ + + KABI_RESERVE(1) + KABI_RESERVE(2) }; static inline void @@ -942,6 +987,11 @@ struct bpf_verifier_ops { int (*btf_struct_access)(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_prog_offload_ops { @@ -1121,6 +1171,9 @@ struct bpf_tramp_image { struct rcu_head rcu; struct work_struct work; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_trampoline { @@ -1149,6 +1202,11 @@ struct bpf_trampoline { /* Executable image of trampoline */ struct bpf_tramp_image *cur_image; struct module *mod; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_attach_target_info { @@ -1180,6 +1238,11 @@ struct bpf_dispatcher { struct static_call_key *sc_key; void *sc_tramp; #endif + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func( @@ -1339,6 +1402,9 @@ static inline bool bpf_prog_has_trampoline(const struct bpf_prog *prog) struct bpf_func_info_aux { u16 linkage; bool unreliable; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; enum bpf_jit_poke_reason { @@ -1361,6 +1427,9 @@ struct bpf_jit_poke_descriptor { u8 adj_off; u16 reason; u32 insn_idx; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* reg_type info for ctx arguments */ @@ -1368,6 +1437,9 @@ struct bpf_ctx_arg_aux { u32 offset; enum bpf_reg_type reg_type; u32 btf_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct btf_mod_pair { @@ -1465,6 +1537,15 @@ struct bpf_prog_aux { struct work_struct work; struct rcu_head rcu; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; struct bpf_prog { @@ -1499,6 +1580,11 @@ struct bpf_prog { DECLARE_FLEX_ARRAY(struct sock_filter, insns); DECLARE_FLEX_ARRAY(struct bpf_insn, insnsi); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_array_aux { @@ -1507,6 +1593,9 @@ struct bpf_array_aux { struct bpf_map *map; struct mutex poke_mutex; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link { @@ -1516,6 +1605,9 @@ struct bpf_link { const struct bpf_link_ops *ops; struct bpf_prog *prog; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link_ops { @@ -1529,12 +1621,18 @@ struct bpf_link_ops { struct bpf_link_info *info); int (*update_map)(struct bpf_link *link, struct bpf_map *new_map, struct bpf_map *old_map); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_tramp_link { struct bpf_link link; struct hlist_node tramp_hlist; u64 cookie; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_shim_tramp_link { @@ -1554,6 +1652,9 @@ struct bpf_link_primer { struct file *file; int fd; u32 id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_struct_ops_value; @@ -1626,6 +1727,11 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; u32 type_id; u32 value_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #if defined(CONFIG_BPF_JIT) && defined(CONFIG_BPF_SYSCALL) @@ -1727,6 +1833,9 @@ struct bpf_array { DECLARE_FLEX_ARRAY(void *, ptrs) __aligned(8); DECLARE_FLEX_ARRAY(void __percpu *, pptrs) __aligned(8); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */ @@ -2222,6 +2331,9 @@ struct bpf_iter_aux_info { enum bpf_iter_task_type type; u32 pid; } task; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, @@ -2252,6 +2364,9 @@ struct bpf_iter_reg { u32 feature; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_iter_meta { diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index b6e58dab8e27..78ad34886e17 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -8,6 +8,7 @@ #include <linux/btf.h> /* for struct btf and btf_id() */ #include <linux/filter.h> /* for MAX_BPF_STACK */ #include <linux/tnum.h> +#include <linux/kabi.h> /* Maximum variable offset umax_value permitted when resolving memory accesses. * In practice this is far bigger than any realistic pointer offset; this limit @@ -225,6 +226,11 @@ struct bpf_reg_state { enum bpf_reg_liveness live; /* if (!precise && SCALAR_VALUE) min/max/tnum don't affect safety */ bool precise; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; enum bpf_stack_slot_type { @@ -273,6 +279,11 @@ struct bpf_reference_state { * exiting a callback function. */ int callback_ref; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* state of the program: @@ -306,6 +317,11 @@ struct bpf_func_state { struct bpf_reference_state *refs; int allocated_stack; struct bpf_stack_state *stack; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_idx_pair { @@ -383,6 +399,11 @@ struct bpf_verifier_state { */ struct bpf_idx_pair *jmp_history; u32 jmp_history_cnt; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define bpf_get_spilled_reg(slot, frame) \ @@ -490,6 +511,11 @@ struct bpf_insn_aux_data { * this instruction, regardless of any heuristics */ bool force_checkpoint; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define MAX_USED_MAPS 64 /* max number of maps accessed by one eBPF program */ @@ -541,6 +567,11 @@ struct bpf_subprog_info { bool tail_call_reachable; bool has_ld_abs; bool is_async_cb; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_verifier_env; @@ -640,6 +671,11 @@ struct bpf_verifier_env { * e.g., in reg_type_str() to generate reg_type string */ char tmp_str_buf[TMP_STR_BUF_LEN]; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; __printf(2, 0) void bpf_verifier_vlog(struct bpf_verifier_log *log, diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4924f0cde1bc..d0171d5461a5 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -944,6 +944,10 @@ enum bpf_map_type { BPF_MAP_TYPE_BLOOM_FILTER, BPF_MAP_TYPE_USER_RINGBUF, BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_RESERVE_1, + BPF_MAP_TYPE_RESERVE_2, + BPF_MAP_TYPE_RESERVE_3, + BPF_MAP_TYPE_RESERVE_4, }; /* Note that tracing related programs such as @@ -988,6 +992,10 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ BPF_PROG_TYPE_NETFILTER, + BPF_PROG_TYPE_RESERVE_1, + BPF_PROG_TYPE_RESERVE_2, + BPF_PROG_TYPE_RESERVE_3, + BPF_PROG_TYPE_RESERVE_4, }; enum bpf_attach_type { @@ -1040,6 +1048,10 @@ enum bpf_attach_type { BPF_TCX_INGRESS, BPF_TCX_EGRESS, BPF_TRACE_UPROBE_MULTI, + BPF_ATTACH_TYPE_RESERVE_1, + BPF_ATTACH_TYPE_RESERVE_2, + BPF_ATTACH_TYPE_RESERVE_3, + BPF_ATTACH_TYPE_RESERVE_4, __MAX_BPF_ATTACH_TYPE }; @@ -1059,6 +1071,10 @@ enum bpf_link_type { BPF_LINK_TYPE_NETFILTER = 10, BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_RESERVE_1 = 13, + BPF_LINK_TYPE_RESERVE_2 = 14, + BPF_LINK_TYPE_RESERVE_3 = 15, + BPF_LINK_TYPE_RESERVE_4 = 16, MAX_BPF_LINK_TYPE, }; -- 2.34.1

1 0

[PATCH OLK-6.6] kabi: reserve space for bpf related structures
by Pu Lehui 09 Jan '24

09 Jan '24

From: Pu Lehui <pulehui(a)huaweicloud.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOP9 -------------------------------- reserve space for bpf related structures. Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 115 +++++++++++++++++++++++++++++++++++ include/linux/bpf_verifier.h | 36 +++++++++++ include/uapi/linux/bpf.h | 16 +++++ 3 files changed, 167 insertions(+) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 392f581af2ce..f37e681cd4f5 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -29,6 +29,7 @@ #include <linux/rcupdate_trace.h> #include <linux/static_call.h> #include <linux/memcontrol.h> +#include <linux/kabi.h> struct bpf_verifier_env; struct bpf_verifier_log; @@ -163,6 +164,11 @@ struct bpf_map_ops { u64 (*map_mem_usage)(const struct bpf_map *map); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* BTF id of struct allocated by map_alloc */ int *map_btf_id; @@ -288,6 +294,11 @@ struct bpf_map { bool bypass_spec_v1; bool frozen; /* write-once; write-protected by freeze_mutex */ s64 __percpu *elem_count; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static inline const char *btf_field_type_name(enum btf_field_type type) @@ -664,6 +675,13 @@ enum bpf_type_flag { /* DYNPTR points to xdp_buff */ DYNPTR_TYPE_XDP = BIT(16 + BPF_BASE_TYPE_BITS), +#ifdef CONFIG_KABI_RESERVE + BPF_TYPE_FLAG_RESERVE_1 = BIT(17 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_2 = BIT(18 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_3 = BIT(19 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_4 = BIT(20 + BPF_BASE_TYPE_BITS), +#endif + __BPF_TYPE_FLAG_MAX, __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1, }; @@ -730,6 +748,13 @@ enum bpf_arg_type { /* Pointer to valid memory of size known at compile time. */ ARG_PTR_TO_FIXED_SIZE_MEM = MEM_FIXED_SIZE | ARG_PTR_TO_MEM, +#ifdef CONFIG_KABI_RESERVE + BPF_ARG_TYPE_RESERVE_1, + BPF_ARG_TYPE_RESERVE_2, + BPF_ARG_TYPE_RESERVE_3, + BPF_ARG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -760,6 +785,13 @@ enum bpf_return_type { RET_PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID, RET_PTR_TO_BTF_ID_TRUSTED = PTR_TRUSTED | RET_PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_RET_TYPE_RESERVE_1, + BPF_RET_TYPE_RESERVE_2, + BPF_RET_TYPE_RESERVE_3, + BPF_RET_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -807,6 +839,9 @@ struct bpf_func_proto { }; int *ret_btf_id; /* return value btf_id */ bool (*allowed)(const struct bpf_prog *prog); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* bpf_context is intentionally undefined structure. Pointer to bpf_context is @@ -875,6 +910,13 @@ enum bpf_reg_type { PTR_TO_TCP_SOCK_OR_NULL = PTR_MAYBE_NULL | PTR_TO_TCP_SOCK, PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_REG_TYPE_RESERVE_1, + BPF_REG_TYPE_RESERVE_2, + BPF_REG_TYPE_RESERVE_3, + BPF_REG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -895,6 +937,9 @@ struct bpf_insn_access_aux { }; }; struct bpf_verifier_log *log; /* for verbose logs */ + + KABI_RESERVE(1) + KABI_RESERVE(2) }; static inline void @@ -942,6 +987,11 @@ struct bpf_verifier_ops { int (*btf_struct_access)(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_prog_offload_ops { @@ -1121,6 +1171,9 @@ struct bpf_tramp_image { struct rcu_head rcu; struct work_struct work; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_trampoline { @@ -1149,6 +1202,11 @@ struct bpf_trampoline { /* Executable image of trampoline */ struct bpf_tramp_image *cur_image; struct module *mod; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_attach_target_info { @@ -1180,6 +1238,11 @@ struct bpf_dispatcher { struct static_call_key *sc_key; void *sc_tramp; #endif + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func( @@ -1339,6 +1402,9 @@ static inline bool bpf_prog_has_trampoline(const struct bpf_prog *prog) struct bpf_func_info_aux { u16 linkage; bool unreliable; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; enum bpf_jit_poke_reason { @@ -1361,6 +1427,9 @@ struct bpf_jit_poke_descriptor { u8 adj_off; u16 reason; u32 insn_idx; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* reg_type info for ctx arguments */ @@ -1368,6 +1437,9 @@ struct bpf_ctx_arg_aux { u32 offset; enum bpf_reg_type reg_type; u32 btf_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct btf_mod_pair { @@ -1465,6 +1537,15 @@ struct bpf_prog_aux { struct work_struct work; struct rcu_head rcu; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; struct bpf_prog { @@ -1499,6 +1580,11 @@ struct bpf_prog { DECLARE_FLEX_ARRAY(struct sock_filter, insns); DECLARE_FLEX_ARRAY(struct bpf_insn, insnsi); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_array_aux { @@ -1507,6 +1593,9 @@ struct bpf_array_aux { struct bpf_map *map; struct mutex poke_mutex; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link { @@ -1516,6 +1605,9 @@ struct bpf_link { const struct bpf_link_ops *ops; struct bpf_prog *prog; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link_ops { @@ -1529,12 +1621,18 @@ struct bpf_link_ops { struct bpf_link_info *info); int (*update_map)(struct bpf_link *link, struct bpf_map *new_map, struct bpf_map *old_map); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_tramp_link { struct bpf_link link; struct hlist_node tramp_hlist; u64 cookie; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_shim_tramp_link { @@ -1554,6 +1652,9 @@ struct bpf_link_primer { struct file *file; int fd; u32 id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_struct_ops_value; @@ -1626,6 +1727,11 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; u32 type_id; u32 value_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #if defined(CONFIG_BPF_JIT) && defined(CONFIG_BPF_SYSCALL) @@ -1727,6 +1833,9 @@ struct bpf_array { DECLARE_FLEX_ARRAY(void *, ptrs) __aligned(8); DECLARE_FLEX_ARRAY(void __percpu *, pptrs) __aligned(8); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */ @@ -2222,6 +2331,9 @@ struct bpf_iter_aux_info { enum bpf_iter_task_type type; u32 pid; } task; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, @@ -2252,6 +2364,9 @@ struct bpf_iter_reg { u32 feature; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_iter_meta { diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index b6e58dab8e27..78ad34886e17 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -8,6 +8,7 @@ #include <linux/btf.h> /* for struct btf and btf_id() */ #include <linux/filter.h> /* for MAX_BPF_STACK */ #include <linux/tnum.h> +#include <linux/kabi.h> /* Maximum variable offset umax_value permitted when resolving memory accesses. * In practice this is far bigger than any realistic pointer offset; this limit @@ -225,6 +226,11 @@ struct bpf_reg_state { enum bpf_reg_liveness live; /* if (!precise && SCALAR_VALUE) min/max/tnum don't affect safety */ bool precise; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; enum bpf_stack_slot_type { @@ -273,6 +279,11 @@ struct bpf_reference_state { * exiting a callback function. */ int callback_ref; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* state of the program: @@ -306,6 +317,11 @@ struct bpf_func_state { struct bpf_reference_state *refs; int allocated_stack; struct bpf_stack_state *stack; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_idx_pair { @@ -383,6 +399,11 @@ struct bpf_verifier_state { */ struct bpf_idx_pair *jmp_history; u32 jmp_history_cnt; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define bpf_get_spilled_reg(slot, frame) \ @@ -490,6 +511,11 @@ struct bpf_insn_aux_data { * this instruction, regardless of any heuristics */ bool force_checkpoint; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define MAX_USED_MAPS 64 /* max number of maps accessed by one eBPF program */ @@ -541,6 +567,11 @@ struct bpf_subprog_info { bool tail_call_reachable; bool has_ld_abs; bool is_async_cb; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_verifier_env; @@ -640,6 +671,11 @@ struct bpf_verifier_env { * e.g., in reg_type_str() to generate reg_type string */ char tmp_str_buf[TMP_STR_BUF_LEN]; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; __printf(2, 0) void bpf_verifier_vlog(struct bpf_verifier_log *log, diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4924f0cde1bc..d0171d5461a5 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -944,6 +944,10 @@ enum bpf_map_type { BPF_MAP_TYPE_BLOOM_FILTER, BPF_MAP_TYPE_USER_RINGBUF, BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_RESERVE_1, + BPF_MAP_TYPE_RESERVE_2, + BPF_MAP_TYPE_RESERVE_3, + BPF_MAP_TYPE_RESERVE_4, }; /* Note that tracing related programs such as @@ -988,6 +992,10 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ BPF_PROG_TYPE_NETFILTER, + BPF_PROG_TYPE_RESERVE_1, + BPF_PROG_TYPE_RESERVE_2, + BPF_PROG_TYPE_RESERVE_3, + BPF_PROG_TYPE_RESERVE_4, }; enum bpf_attach_type { @@ -1040,6 +1048,10 @@ enum bpf_attach_type { BPF_TCX_INGRESS, BPF_TCX_EGRESS, BPF_TRACE_UPROBE_MULTI, + BPF_ATTACH_TYPE_RESERVE_1, + BPF_ATTACH_TYPE_RESERVE_2, + BPF_ATTACH_TYPE_RESERVE_3, + BPF_ATTACH_TYPE_RESERVE_4, __MAX_BPF_ATTACH_TYPE }; @@ -1059,6 +1071,10 @@ enum bpf_link_type { BPF_LINK_TYPE_NETFILTER = 10, BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_RESERVE_1 = 13, + BPF_LINK_TYPE_RESERVE_2 = 14, + BPF_LINK_TYPE_RESERVE_3 = 15, + BPF_LINK_TYPE_RESERVE_4 = 16, MAX_BPF_LINK_TYPE, }; -- 2.34.1

1 0

[PATCH OLK-6.6] kabi: reserve space for bpf related structures
by Pu Lehui 09 Jan '24

09 Jan '24

From: Pu Lehui <pulehui(a)huaweicloud.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOP9 -------------------------------- reserve space for bpf related structures. Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/bpf.h | 115 +++++++++++++++++++++++++++++++++++ include/linux/bpf_verifier.h | 36 +++++++++++ include/uapi/linux/bpf.h | 16 +++++ 3 files changed, 167 insertions(+) diff --git a/include/linux/bpf.h b/include/linux/bpf.h index 392f581af2ce..f37e681cd4f5 100644 --- a/include/linux/bpf.h +++ b/include/linux/bpf.h @@ -29,6 +29,7 @@ #include <linux/rcupdate_trace.h> #include <linux/static_call.h> #include <linux/memcontrol.h> +#include <linux/kabi.h> struct bpf_verifier_env; struct bpf_verifier_log; @@ -163,6 +164,11 @@ struct bpf_map_ops { u64 (*map_mem_usage)(const struct bpf_map *map); + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* BTF id of struct allocated by map_alloc */ int *map_btf_id; @@ -288,6 +294,11 @@ struct bpf_map { bool bypass_spec_v1; bool frozen; /* write-once; write-protected by freeze_mutex */ s64 __percpu *elem_count; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static inline const char *btf_field_type_name(enum btf_field_type type) @@ -664,6 +675,13 @@ enum bpf_type_flag { /* DYNPTR points to xdp_buff */ DYNPTR_TYPE_XDP = BIT(16 + BPF_BASE_TYPE_BITS), +#ifdef CONFIG_KABI_RESERVE + BPF_TYPE_FLAG_RESERVE_1 = BIT(17 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_2 = BIT(18 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_3 = BIT(19 + BPF_BASE_TYPE_BITS), + BPF_TYPE_FLAG_RESERVE_4 = BIT(20 + BPF_BASE_TYPE_BITS), +#endif + __BPF_TYPE_FLAG_MAX, __BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1, }; @@ -730,6 +748,13 @@ enum bpf_arg_type { /* Pointer to valid memory of size known at compile time. */ ARG_PTR_TO_FIXED_SIZE_MEM = MEM_FIXED_SIZE | ARG_PTR_TO_MEM, +#ifdef CONFIG_KABI_RESERVE + BPF_ARG_TYPE_RESERVE_1, + BPF_ARG_TYPE_RESERVE_2, + BPF_ARG_TYPE_RESERVE_3, + BPF_ARG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -760,6 +785,13 @@ enum bpf_return_type { RET_PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID, RET_PTR_TO_BTF_ID_TRUSTED = PTR_TRUSTED | RET_PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_RET_TYPE_RESERVE_1, + BPF_RET_TYPE_RESERVE_2, + BPF_RET_TYPE_RESERVE_3, + BPF_RET_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -807,6 +839,9 @@ struct bpf_func_proto { }; int *ret_btf_id; /* return value btf_id */ bool (*allowed)(const struct bpf_prog *prog); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* bpf_context is intentionally undefined structure. Pointer to bpf_context is @@ -875,6 +910,13 @@ enum bpf_reg_type { PTR_TO_TCP_SOCK_OR_NULL = PTR_MAYBE_NULL | PTR_TO_TCP_SOCK, PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | PTR_TO_BTF_ID, +#ifdef CONFIG_KABI_RESERVE + BPF_REG_TYPE_RESERVE_1, + BPF_REG_TYPE_RESERVE_2, + BPF_REG_TYPE_RESERVE_3, + BPF_REG_TYPE_RESERVE_4, +#endif + /* This must be the last entry. Its purpose is to ensure the enum is * wide enough to hold the higher bits reserved for bpf_type_flag. */ @@ -895,6 +937,9 @@ struct bpf_insn_access_aux { }; }; struct bpf_verifier_log *log; /* for verbose logs */ + + KABI_RESERVE(1) + KABI_RESERVE(2) }; static inline void @@ -942,6 +987,11 @@ struct bpf_verifier_ops { int (*btf_struct_access)(struct bpf_verifier_log *log, const struct bpf_reg_state *reg, int off, int size); + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_prog_offload_ops { @@ -1121,6 +1171,9 @@ struct bpf_tramp_image { struct rcu_head rcu; struct work_struct work; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_trampoline { @@ -1149,6 +1202,11 @@ struct bpf_trampoline { /* Executable image of trampoline */ struct bpf_tramp_image *cur_image; struct module *mod; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_attach_target_info { @@ -1180,6 +1238,11 @@ struct bpf_dispatcher { struct static_call_key *sc_key; void *sc_tramp; #endif + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; static __always_inline __nocfi unsigned int bpf_dispatcher_nop_func( @@ -1339,6 +1402,9 @@ static inline bool bpf_prog_has_trampoline(const struct bpf_prog *prog) struct bpf_func_info_aux { u16 linkage; bool unreliable; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; enum bpf_jit_poke_reason { @@ -1361,6 +1427,9 @@ struct bpf_jit_poke_descriptor { u8 adj_off; u16 reason; u32 insn_idx; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; /* reg_type info for ctx arguments */ @@ -1368,6 +1437,9 @@ struct bpf_ctx_arg_aux { u32 offset; enum bpf_reg_type reg_type; u32 btf_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct btf_mod_pair { @@ -1465,6 +1537,15 @@ struct bpf_prog_aux { struct work_struct work; struct rcu_head rcu; }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; struct bpf_prog { @@ -1499,6 +1580,11 @@ struct bpf_prog { DECLARE_FLEX_ARRAY(struct sock_filter, insns); DECLARE_FLEX_ARRAY(struct bpf_insn, insnsi); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_array_aux { @@ -1507,6 +1593,9 @@ struct bpf_array_aux { struct bpf_map *map; struct mutex poke_mutex; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link { @@ -1516,6 +1605,9 @@ struct bpf_link { const struct bpf_link_ops *ops; struct bpf_prog *prog; struct work_struct work; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_link_ops { @@ -1529,12 +1621,18 @@ struct bpf_link_ops { struct bpf_link_info *info); int (*update_map)(struct bpf_link *link, struct bpf_map *new_map, struct bpf_map *old_map); + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_tramp_link { struct bpf_link link; struct hlist_node tramp_hlist; u64 cookie; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_shim_tramp_link { @@ -1554,6 +1652,9 @@ struct bpf_link_primer { struct file *file; int fd; u32 id; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_struct_ops_value; @@ -1626,6 +1727,11 @@ struct bpf_struct_ops { struct btf_func_model func_models[BPF_STRUCT_OPS_MAX_NR_MEMBERS]; u32 type_id; u32 value_id; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #if defined(CONFIG_BPF_JIT) && defined(CONFIG_BPF_SYSCALL) @@ -1727,6 +1833,9 @@ struct bpf_array { DECLARE_FLEX_ARRAY(void *, ptrs) __aligned(8); DECLARE_FLEX_ARRAY(void __percpu *, pptrs) __aligned(8); }; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; #define BPF_COMPLEXITY_LIMIT_INSNS 1000000 /* yes. 1M insns */ @@ -2222,6 +2331,9 @@ struct bpf_iter_aux_info { enum bpf_iter_task_type type; u32 pid; } task; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; typedef int (*bpf_iter_attach_target_t)(struct bpf_prog *prog, @@ -2252,6 +2364,9 @@ struct bpf_iter_reg { u32 feature; struct bpf_ctx_arg_aux ctx_arg_info[BPF_ITER_CTX_ARG_MAX]; const struct bpf_iter_seq_info *seq_info; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct bpf_iter_meta { diff --git a/include/linux/bpf_verifier.h b/include/linux/bpf_verifier.h index b6e58dab8e27..78ad34886e17 100644 --- a/include/linux/bpf_verifier.h +++ b/include/linux/bpf_verifier.h @@ -8,6 +8,7 @@ #include <linux/btf.h> /* for struct btf and btf_id() */ #include <linux/filter.h> /* for MAX_BPF_STACK */ #include <linux/tnum.h> +#include <linux/kabi.h> /* Maximum variable offset umax_value permitted when resolving memory accesses. * In practice this is far bigger than any realistic pointer offset; this limit @@ -225,6 +226,11 @@ struct bpf_reg_state { enum bpf_reg_liveness live; /* if (!precise && SCALAR_VALUE) min/max/tnum don't affect safety */ bool precise; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; enum bpf_stack_slot_type { @@ -273,6 +279,11 @@ struct bpf_reference_state { * exiting a callback function. */ int callback_ref; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* state of the program: @@ -306,6 +317,11 @@ struct bpf_func_state { struct bpf_reference_state *refs; int allocated_stack; struct bpf_stack_state *stack; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_idx_pair { @@ -383,6 +399,11 @@ struct bpf_verifier_state { */ struct bpf_idx_pair *jmp_history; u32 jmp_history_cnt; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define bpf_get_spilled_reg(slot, frame) \ @@ -490,6 +511,11 @@ struct bpf_insn_aux_data { * this instruction, regardless of any heuristics */ bool force_checkpoint; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; #define MAX_USED_MAPS 64 /* max number of maps accessed by one eBPF program */ @@ -541,6 +567,11 @@ struct bpf_subprog_info { bool tail_call_reachable; bool has_ld_abs; bool is_async_cb; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; struct bpf_verifier_env; @@ -640,6 +671,11 @@ struct bpf_verifier_env { * e.g., in reg_type_str() to generate reg_type string */ char tmp_str_buf[TMP_STR_BUF_LEN]; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; __printf(2, 0) void bpf_verifier_vlog(struct bpf_verifier_log *log, diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 4924f0cde1bc..d0171d5461a5 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -944,6 +944,10 @@ enum bpf_map_type { BPF_MAP_TYPE_BLOOM_FILTER, BPF_MAP_TYPE_USER_RINGBUF, BPF_MAP_TYPE_CGRP_STORAGE, + BPF_MAP_TYPE_RESERVE_1, + BPF_MAP_TYPE_RESERVE_2, + BPF_MAP_TYPE_RESERVE_3, + BPF_MAP_TYPE_RESERVE_4, }; /* Note that tracing related programs such as @@ -988,6 +992,10 @@ enum bpf_prog_type { BPF_PROG_TYPE_SK_LOOKUP, BPF_PROG_TYPE_SYSCALL, /* a program that can execute syscalls */ BPF_PROG_TYPE_NETFILTER, + BPF_PROG_TYPE_RESERVE_1, + BPF_PROG_TYPE_RESERVE_2, + BPF_PROG_TYPE_RESERVE_3, + BPF_PROG_TYPE_RESERVE_4, }; enum bpf_attach_type { @@ -1040,6 +1048,10 @@ enum bpf_attach_type { BPF_TCX_INGRESS, BPF_TCX_EGRESS, BPF_TRACE_UPROBE_MULTI, + BPF_ATTACH_TYPE_RESERVE_1, + BPF_ATTACH_TYPE_RESERVE_2, + BPF_ATTACH_TYPE_RESERVE_3, + BPF_ATTACH_TYPE_RESERVE_4, __MAX_BPF_ATTACH_TYPE }; @@ -1059,6 +1071,10 @@ enum bpf_link_type { BPF_LINK_TYPE_NETFILTER = 10, BPF_LINK_TYPE_TCX = 11, BPF_LINK_TYPE_UPROBE_MULTI = 12, + BPF_LINK_TYPE_RESERVE_1 = 13, + BPF_LINK_TYPE_RESERVE_2 = 14, + BPF_LINK_TYPE_RESERVE_3 = 15, + BPF_LINK_TYPE_RESERVE_4 = 16, MAX_BPF_LINK_TYPE, }; -- 2.34.1

1 0

[PATCH V4 OLK-6.6 0/8] Spark SQL scenario bpf readahead optimization synchronization to OLK-6.6
by ZhaoLong Wang 09 Jan '24

09 Jan '24

CONFIG: CONFIG_DEBUG_INFO_BTF=y CONFIG_BPF_SYSCALL=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y V2: - Using helpers function, such as i_size_read(), round_up - Fix commit log Signature - Fix the user-mode test program V3 - Do not use the round_up helper function. Use the correct calculation - err = -errno before printf V4 - Drop the "Conflict" in the commit log. Hou Tao (5): vfs: add bare tracepoints for vfs read and release fs: add helper fs_file_read_do_trace() xfs: add trace for read and release of regular file ext4: add trace for the read and release of regular file selftests/bpf: add demo for file read pattern detection Yufen Yu (1): readahead: introduce FMODE_CTL_WILLNEED to read first 2MB of file ZhaoLong Wang (2): VFS: Rolling Back the fmode macro definition and structure members selftests/bpf: Update the demo file_read_pattern to run on libbpf 1.0+ fs/ext4/file.c | 4 + fs/read_write.c | 38 +++++ fs/xfs/xfs_file.c | 3 + include/linux/fs.h | 37 +++++ include/trace/events/fs.h | 33 +++++ mm/readahead.c | 40 ++++- tools/testing/selftests/bpf/Makefile | 1 + .../testing/selftests/bpf/file_read_pattern.c | 76 ++++++++++ .../bpf/progs/file_read_pattern_prog.c | 137 ++++++++++++++++++ 9 files changed, 368 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/fs.h create mode 100644 tools/testing/selftests/bpf/file_read_pattern.c create mode 100644 tools/testing/selftests/bpf/progs/file_read_pattern_prog.c -- 2.39.2

1 8

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 09 Jan '24

09 Jan '24

Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.34.1

1 1

[PATCH OLK-6.6] kabi: Reserve space for perf subsystem related structures
by Yang Jihong 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UOCZ -------------------------------- Reserve kabi space for `struct pmu`, `struct perf_event`, `struct perf_event_context`, `struct perf_cgroup_info` and `struct perf_sample_data`. Signed-off-by: Yang Jihong <yangjihong1(a)huawei.com> --- include/linux/perf_event.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index e846f87e2d09..a24aa95de1fc 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -62,6 +62,7 @@ struct perf_guest_info_callbacks { #include <linux/security.h> #include <linux/static_call.h> #include <linux/lockdep.h> +#include <linux/kabi.h> #include <asm/local.h> struct perf_callchain_entry { @@ -324,6 +325,11 @@ struct pmu { /* number of address filters this PMU can do */ unsigned int nr_addr_filters; + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + /* * Fully disable/enable this PMU, can be used to protect from the PMI * as well as for lazy/batch writing of the MSRs. @@ -540,6 +546,11 @@ struct pmu { * Check period value for PERF_EVENT_IOC_PERIOD ioctl. */ int (*check_period) (struct perf_event *event, u64 value); /* optional */ + + KABI_RESERVE(5) + KABI_RESERVE(6) + KABI_RESERVE(7) + KABI_RESERVE(8) }; enum perf_addr_filter_action_t { @@ -839,6 +850,13 @@ struct perf_event { * user. */ __u32 orig_type; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) + KABI_RESERVE(5) + KABI_RESERVE(6) #endif /* CONFIG_PERF_EVENTS */ }; @@ -965,6 +983,11 @@ struct perf_event_context { * that until the signal is delivered. */ local_t nr_pending; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) }; /* @@ -1040,6 +1063,9 @@ struct perf_cgroup_info { u64 timestamp; u64 timeoffset; int active; + + KABI_RESERVE(1) + KABI_RESERVE(2) }; struct perf_cgroup { @@ -1192,6 +1218,11 @@ struct perf_sample_data { u64 data_page_size; u64 code_page_size; u64 aux_size; + + KABI_RESERVE(1) + KABI_RESERVE(2) + KABI_RESERVE(3) + KABI_RESERVE(4) } ____cacheline_aligned; /* default value for data source */ -- 2.34.1

1 0

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 09 Jan '24

09 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH V3 OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 355 +++++++++++++++++++++++++ 5 files changed, 371 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 66737e8c8673..677b4cc4668a 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6924,6 +6924,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index fcbef6c06587..c16cdb7b2596 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8120,6 +8120,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..d0aea022b68b --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,355 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry; + + dentry = d_find_alias(inode); + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit; + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + limit = READ_ONCE(buf_limit); + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + + ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char __user *buf, + size_t count, loff_t *offp) +{ + int ret; + unsigned long limit; + + ret = kstrtoul_from_user(buf, count, 10, &limit); + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir; + + dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

1 0

[PATCH OLK-6.6] fs/dirty_pages: dump the number of dirty pages for each inode
by Zizhi Wo 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8OHM4?from=project-issue CVE: NA ---------------------------------------- In order to analyse the IO performance when using buffer IO, it's useful to obtain the number of dirty pages for each inode in the filesystem. This feature depends on 'CONFIG_DIRTY_PAGES'. It creates 3 interfaces by using procfs. /proc/dirty/buffer_size for buffer allocation and release, /proc/dirty/page_threshold to filter result and /proc/dirty/dirty_list to get dirty pages. Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/Kconfig | 13 + fs/Makefile | 1 + fs/dirty_pages.c | 350 +++++++++++++++++++++++++ 5 files changed, 366 insertions(+) create mode 100644 fs/dirty_pages.c diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 66737e8c8673..677b4cc4668a 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6924,6 +6924,7 @@ CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index fcbef6c06587..c16cdb7b2596 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8120,6 +8120,7 @@ CONFIG_PROC_PID_ARCH_STATUS=y CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y +CONFIG_DIRTY_PAGES=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y diff --git a/fs/Kconfig b/fs/Kconfig index 7c9d45ba9b0f..6dc83223c61b 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -170,6 +170,19 @@ source "fs/proc/Kconfig" source "fs/kernfs/Kconfig" source "fs/sysfs/Kconfig" +config DIRTY_PAGES + bool "Dumps the number of dirty pages of each file" + depends on PROC_FS + default y + help + This config supports the rendering of dirty page data to the user, + which may be useful to analyze the IO performance when using buffer + IO. + + It create 3 interfaces by using procfs. /proc/dirty/buffer_size for + buffer allocation and release; /proc/dirty/page_threshold to filter + result; /proc/dirty/dirty_list to get dirty pages. + config TMPFS bool "Tmpfs virtual memory file system support (former shm fs)" depends on SHMEM diff --git a/fs/Makefile b/fs/Makefile index bb6164200a39..cc4735c23c32 100644 --- a/fs/Makefile +++ b/fs/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_FS_POSIX_ACL) += posix_acl.o obj-$(CONFIG_NFS_COMMON) += nfs_common/ obj-$(CONFIG_COREDUMP) += coredump.o obj-$(CONFIG_SYSCTL) += drop_caches.o sysctls.o +obj-$(CONFIG_DIRTY_PAGES) += dirty_pages.o obj-$(CONFIG_FHANDLE) += fhandle.o obj-$(CONFIG_CGROUP_FILES) += filescontrol.o diff --git a/fs/dirty_pages.c b/fs/dirty_pages.c new file mode 100644 index 000000000000..209a76a6aa46 --- /dev/null +++ b/fs/dirty_pages.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/uaccess.h> +#include <linux/pagemap.h> +#include <linux/pagevec.h> +#include <linux/fs.h> +#include <linux/mm.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <linux/kdev_t.h> +#include <linux/vmalloc.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include "internal.h" + +#define DIRTY_ROOT "dirty" /* proc root directory name */ +#define DIRTY_BUFFER_SIZE "buffer_size" /* proc file to control buffer */ +#define DIRTY_PAGES "dirty_list" /* proc file to obtain diry pages */ +#define DIRTY_LIMIT "page_threshold" /* proc file to filter result */ +#define MAX_BUF_NUM 102400 /* max buffer num in number of pages */ +#define TERM_STR "terminated\n" /* tail string for overflowed buffer */ +#define UNKNOW_STR "unknown" /* for unknown file name or fs type */ + +static char *buf_dirty; /* buffer to store number of dirty pages */ +static unsigned long buf_size; /* size of buffer in bytes */ +static unsigned long buf_num; /* size of buffer in number of pages */ +static unsigned long buf_limit; /* filter threshold of dirty pages */ +unsigned long lock_word; /* for exclusive access to buffer */ + +static bool dirty_pages_lock(void) +{ + if (xchg(&lock_word, 1) == 1) + return false; + return true; +} + +static void dirty_pages_unlock(void) +{ + lock_word = 0; +} + +static unsigned long dump_dirtypages_inode(struct inode *inode) +{ + XA_STATE(xas, &inode->i_mapping->i_pages, 0); + unsigned long pages = 0; + void *page; + + if (!mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) + return 0; + + xas_lock_irq(&xas); + xas_for_each_marked(&xas, page, (pgoff_t)-1, PAGECACHE_TAG_DIRTY) { + if (++pages % XA_CHECK_SCHED) + continue; + + xas_pause(&xas); + xas_unlock_irq(&xas); + cond_resched(); + xas_lock_irq(&xas); + } + xas_unlock_irq(&xas); + + return pages; +} + +static char *inode_filename(struct inode *inode) +{ + char *path; + static char buf[PATH_MAX]; + struct dentry *dentry = d_find_alias(inode); + + if (!dentry) + return UNKNOW_STR; + + path = dentry_path_raw(dentry, buf, PATH_MAX); + dput(dentry); + + return IS_ERR_OR_NULL(path) ? UNKNOW_STR : path; +} + +static const char *sb_fstype(struct super_block *sb) +{ + if (sb->s_type && sb->s_type->name) + return sb->s_type->name; + else + return UNKNOW_STR; +} + +static inline bool is_sb_writable(struct super_block *sb) +{ + if (sb_rdonly(sb)) + return false; + + if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) + return false; + + return true; +} + +/* + * dump_dirtypages_sb - dump the dirty pages of each inode in the sb + * @sb the super block + * @m the seq_file witch is initialized in proc_dpages_open + * + * For each inode in the sb, call dump_dirtypages_pages to get the number + * of dirty pages. And use seq_printf to store the result in the buffer + * if it's not less than the threshold. The inode in unusual state will + * be skipped. + */ +static void dump_dirtypages_sb(struct super_block *sb, struct seq_file *m) +{ + struct inode *inode, *toput_inode = NULL; + unsigned long limit = READ_ONCE(buf_limit); + + if (!is_sb_writable(sb) || !sb->s_bdev) + return; + + spin_lock(&sb->s_inode_list_lock); + list_for_each_entry(inode, &sb->s_inodes, i_sb_list) { + unsigned long dirty_pages; + + spin_lock(&inode->i_lock); + if (inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) { + spin_unlock(&inode->i_lock); + continue; + } + + __iget(inode); + spin_unlock(&inode->i_lock); + spin_unlock(&sb->s_inode_list_lock); + + dirty_pages = dump_dirtypages_inode(inode); + if (!dirty_pages || dirty_pages < limit) + goto skip; + + seq_printf(m, "FSType: %s, Dev ID: %u(%u:%u) ino %lu, dirty pages %lu, path %s\n", + sb_fstype(sb), sb->s_dev, MAJOR(sb->s_dev), + MINOR(sb->s_dev), inode->i_ino, dirty_pages, + inode_filename(inode)); + + if (seq_has_overflowed(m)) { + /* keep size > count to avoid overflow in seq_read_iter() */ + m->size += strlen(TERM_STR) + 1; + seq_puts(m, TERM_STR); + iput(inode); + iput(toput_inode); + return; + } +skip: + iput(toput_inode); + toput_inode = inode; + cond_resched(); + spin_lock(&sb->s_inode_list_lock); + } + spin_unlock(&sb->s_inode_list_lock); + iput(toput_inode); +} + +static int proc_dpages_show(struct seq_file *m, void *v) +{ + iterate_supers((void *)dump_dirtypages_sb, (void *)m); + return 0; +} + +static int proc_dpages_open(struct inode *inode, struct file *filp) +{ + int ret; + struct seq_file *m; + + if (!dirty_pages_lock()) + return -EBUSY; + + if (buf_dirty == NULL || buf_size == 0) { + pr_warn("please allocate buffer before getting dirty pages\n"); + dirty_pages_unlock(); + return -ENOMEM; + } + + ret = single_open(filp, proc_dpages_show, NULL); + if (ret) { + dirty_pages_unlock(); + return ret; + } + + m = (struct seq_file *)filp->private_data; + memset(buf_dirty, 0, buf_size); + m->size = buf_size - (strlen(TERM_STR) + 1); + m->buf = buf_dirty; + + return 0; +} + +static int proc_dpages_release(struct inode *inode, struct file *file) +{ + struct seq_file *m = file->private_data; + + /* we don't want to free the buf */ + m->buf = NULL; + dirty_pages_unlock(); + return single_release(inode, file); +} + +static void free_buf_dirty(void) +{ + if (!buf_dirty) + return; + + vfree(buf_dirty); + buf_dirty = NULL; + buf_size = 0; + WRITE_ONCE(buf_num, 0); +} + +static int proc_buffer_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_num)); + return 0; +} + +static int proc_buffer_open(struct inode *inode, struct file *filp) +{ + int ret; + + if (((filp->f_flags & O_ACCMODE) != O_RDONLY) && !dirty_pages_lock()) + return -EBUSY; + + ret = single_open(filp, proc_buffer_show, NULL); + if (ret) + dirty_pages_unlock(); + + return ret; +} + +static ssize_t proc_buffer_write(struct file *filp, const char *buf, size_t count, + loff_t *offp) +{ + unsigned long new_buf_num, new_buf_size; + char *new_buf_dirty; + int ret = kstrtoul_from_user(buf, count, 10, &new_buf_num); + + if (ret != 0 || new_buf_num > MAX_BUF_NUM) + return -EINVAL; + + if (new_buf_num == buf_num) + return count; + + if (new_buf_num == 0) { + free_buf_dirty(); + return count; + } + + new_buf_size = PAGE_SIZE * new_buf_num; + new_buf_dirty = vzalloc(new_buf_size); + if (!new_buf_dirty) + return -ENOMEM; + + free_buf_dirty(); + buf_dirty = new_buf_dirty; + buf_size = new_buf_size; + WRITE_ONCE(buf_num, new_buf_num); + + return count; +} + +static int proc_buffer_release(struct inode *inode, struct file *filp) +{ + if ((filp->f_flags & O_ACCMODE) != O_RDONLY) + dirty_pages_unlock(); + return single_release(inode, filp); +} + +static int proc_limit_show(struct seq_file *m, void *v) +{ + seq_printf(m, "%lu\n", READ_ONCE(buf_limit)); + return 0; +} + +static int proc_limit_open(struct inode *inode, struct file *filp) +{ + return single_open(filp, proc_limit_show, NULL); +} + +static ssize_t proc_limit_write(struct file *filp, const char *buf, size_t count, + loff_t *offp) +{ + unsigned long limit; + int ret = kstrtoul_from_user(buf, count, 10, &limit); + + if (ret != 0) + return ret; + + WRITE_ONCE(buf_limit, limit); + + return count; +} + +static const struct proc_ops proc_dpages_operations = { + .proc_open = proc_dpages_open, + .proc_read = seq_read, + .proc_release = proc_dpages_release, +}; + +static const struct proc_ops proc_buffer_operations = { + .proc_open = proc_buffer_open, + .proc_read = seq_read, + .proc_write = proc_buffer_write, + .proc_lseek = seq_lseek, + .proc_release = proc_buffer_release, +}; + +static const struct proc_ops proc_limit_operations = { + .proc_open = proc_limit_open, + .proc_read = seq_read, + .proc_write = proc_limit_write, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init dpages_proc_init(void) +{ + struct proc_dir_entry *dirty_dir = proc_mkdir(DIRTY_ROOT, NULL); + + if (!dirty_dir) + return -ENOMEM; + + if (!proc_create(DIRTY_PAGES, 0440, dirty_dir, &proc_dpages_operations)) + goto fail_pages; + + if (!proc_create(DIRTY_BUFFER_SIZE, 0640, dirty_dir, + &proc_buffer_operations)) + goto fail_switch; + + if (!proc_create(DIRTY_LIMIT, 0640, dirty_dir, &proc_limit_operations)) + goto fail_limit; + + return 0; + +fail_limit: + remove_proc_entry(DIRTY_BUFFER_SIZE, dirty_dir); +fail_switch: + remove_proc_entry(DIRTY_PAGES, dirty_dir); +fail_pages: + remove_proc_entry(DIRTY_ROOT, NULL); + return -ENOMEM; +} + +subsys_initcall(dpages_proc_init); -- 2.39.2

2 1

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 09 Jan '24

09 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 38 ++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 118 +++++++++++++++++++++++++ kernel/sched/fair.c | 45 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 543 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-6.6] x86: config: disable network config
by Zhengchao Shao 09 Jan '24

09 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8UM53 CVE: NA -------------------------------- Disable X86 network config. Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 34 ++++++++++++++-------------- 1 file changed, 17 insertions(+), 17 deletions(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 1ef398404878..dd7a8a3bca0f 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -1860,7 +1860,7 @@ CONFIG_BT_CMTP=m CONFIG_BT_HIDP=m CONFIG_BT_HS=y CONFIG_BT_LE=y -CONFIG_BT_LE_L2CAP_ECRED=y +# CONFIG_BT_LE_L2CAP_ECRED is not set # CONFIG_BT_6LOWPAN is not set # CONFIG_BT_LEDS is not set # CONFIG_BT_MSFTEXT is not set @@ -1876,7 +1876,7 @@ CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_HCIBTUSB=m CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y -CONFIG_BT_HCIBTUSB_POLL_SYNC=y +# CONFIG_BT_HCIBTUSB_POLL_SYNC is not set CONFIG_BT_HCIBTUSB_BCM=y # CONFIG_BT_HCIBTUSB_MTK is not set CONFIG_BT_HCIBTUSB_RTL=y @@ -2788,7 +2788,7 @@ CONFIG_AMD_XGBE_HAVE_ECC=y CONFIG_NET_VENDOR_AQUANTIA=y CONFIG_AQTION=m # CONFIG_NET_VENDOR_ARC is not set -CONFIG_NET_VENDOR_ASIX=y +# CONFIG_NET_VENDOR_ASIX is not set # CONFIG_SPI_AX88796C is not set CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m @@ -2836,7 +2836,7 @@ CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m # CONFIG_NET_VENDOR_CORTINA is not set -CONFIG_NET_VENDOR_DAVICOM=y +# CONFIG_NET_VENDOR_DAVICOM is not set # CONFIG_DM9051 is not set CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y @@ -2851,10 +2851,10 @@ CONFIG_BE2NET_HWMON=y # CONFIG_BE2NET_BE3 is not set CONFIG_BE2NET_LANCER=y CONFIG_BE2NET_SKYHAWK=y -CONFIG_NET_VENDOR_ENGLEDER=y +# CONFIG_NET_VENDOR_ENGLEDER is not set # CONFIG_TSNEP is not set # CONFIG_NET_VENDOR_EZCHIP is not set -CONFIG_NET_VENDOR_FUNGIBLE=y +# CONFIG_NET_VENDOR_FUNGIBLE is not set # CONFIG_FUN_ETH is not set CONFIG_NET_VENDOR_GOOGLE=y # CONFIG_GVE is not set @@ -2882,14 +2882,14 @@ CONFIG_I40E_DCB=y CONFIG_IAVF=m CONFIG_I40EVF=m CONFIG_ICE=m -CONFIG_ICE_SWITCHDEV=y -CONFIG_ICE_HWTS=y +# CONFIG_ICE_SWITCHDEV is not set +#CONFIG_ICE_HWTS is not set CONFIG_FM10K=m # CONFIG_IGC is not set # CONFIG_JME is not set -CONFIG_NET_VENDOR_ADI=y +# CONFIG_NET_VENDOR_ADI is not set # CONFIG_ADIN1110 is not set -CONFIG_NET_VENDOR_LITEX=y +# CONFIG_NET_VENDOR_LITEX is not set # CONFIG_NET_VENDOR_MARVELL is not set CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m @@ -2924,7 +2924,7 @@ CONFIG_MLXFW=m # CONFIG_NET_VENDOR_MICREL is not set # CONFIG_NET_VENDOR_MICROCHIP is not set # CONFIG_NET_VENDOR_MICROSEMI is not set -CONFIG_NET_VENDOR_MICROSOFT=y +# CONFIG_NET_VENDOR_MICROSOFT is not set # CONFIG_MICROSOFT_MANA is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m @@ -2938,7 +2938,7 @@ CONFIG_NET_VENDOR_NETRONOME=y CONFIG_NFP=m CONFIG_NFP_APP_FLOWER=y CONFIG_NFP_APP_ABM_NIC=y -CONFIG_NFP_NET_IPSEC=y +# CONFIG_NFP_NET_IPSEC is not set # CONFIG_NFP_DEBUG is not set # CONFIG_NET_VENDOR_NVIDIA is not set CONFIG_NET_VENDOR_OKI=y @@ -2995,10 +2995,10 @@ CONFIG_SFC_MCDI_LOGGING=y # CONFIG_NET_VENDOR_SYNOPSYS is not set # CONFIG_NET_VENDOR_TEHUTI is not set # CONFIG_NET_VENDOR_TI is not set -CONFIG_NET_VENDOR_VERTEXCOM=y +# CONFIG_NET_VENDOR_VERTEXCOM is not set # CONFIG_MSE102X is not set # CONFIG_NET_VENDOR_VIA is not set -CONFIG_NET_VENDOR_WANGXUN=y +# CONFIG_NET_VENDOR_WANGXUN is not set CONFIG_LIBWX=m CONFIG_NGBE=m CONFIG_TXGBE=m @@ -3325,7 +3325,7 @@ CONFIG_MT76x2U=m CONFIG_WLAN_VENDOR_MICROCHIP=y # CONFIG_WILC1000_SDIO is not set # CONFIG_WILC1000_SPI is not set -CONFIG_WLAN_VENDOR_PURELIFI=y +# CONFIG_WLAN_VENDOR_PURELIFI is not set # CONFIG_PLFXLC is not set CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m @@ -3382,7 +3382,7 @@ CONFIG_RTL8XXXU=m # CONFIG_RTW88 is not set # CONFIG_RTW89 is not set # CONFIG_WLAN_VENDOR_RSI is not set -CONFIG_WLAN_VENDOR_SILABS=y +# CONFIG_WLAN_VENDOR_SILABS is not set # CONFIG_WFX is not set # CONFIG_WLAN_VENDOR_ST is not set # CONFIG_WLAN_VENDOR_TI is not set @@ -8225,7 +8225,7 @@ CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_RPCSEC_GSS_KRB5=m -CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1=y +# CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA1 is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_CAMELLIA is not set # CONFIG_RPCSEC_GSS_KRB5_ENCTYPES_AES_SHA2 is not set CONFIG_SUNRPC_DEBUG=y -- 2.34.1

1 0

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 09 Jan '24

09 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

1 1

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 09 Jan '24

09 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Li Zefan <lizefan(a)huawei.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 2 ++ include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 ++++ kernel/pid.c | 57 +++++++++++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 ++++++++ kernel/sysctl.c | 2 ++ kernel/trace/pid_list.c | 4 +++ kernel/trace/trace.c | 4 +++ kernel/trace/trace.h | 2 ++ 9 files changed, 93 insertions(+) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..8c07d158bb54 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default y + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..4e9267988dd7 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -45,6 +45,10 @@ #include <net/sock.h> #include <uapi/linux/pidfd.h> +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +#include <linux/kmemleak.h> +#endif + struct pid init_struct_pid = { .count = REFCOUNT_INIT(1), .tasks = { @@ -59,12 +63,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +91,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +208,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +252,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +668,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +709,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +719,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

1 0

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 09 Jan '24

09 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

1 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 09 Jan '24

09 Jan '24

v2 -> v3 - fix code style and commit messages v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: add ETMEM feature CONFIG to mm/Kconfig etmem: add ETMEM scan feature CONFIG to mm/Kconfig mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

[PATCH V3 OLK-6.6 0/8] Spark SQL scenario bpf readahead optimization synchronization to OLK-6.6
by ZhaoLong Wang 08 Jan '24

08 Jan '24

CONFIG: CONFIG_DEBUG_INFO_BTF=y CONFIG_BPF_SYSCALL=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y V2: - Using helpers function, such as i_size_read(), round_up - Fix commit log Signature - Fix the user-mode test program V3 - Do not use the round_up helper function. Use the correct calculation - err = -errno before printf Hou Tao (5): vfs: add bare tracepoints for vfs read and release fs: add helper fs_file_read_do_trace() xfs: add trace for read and release of regular file ext4: add trace for the read and release of regular file selftests/bpf: add demo for file read pattern detection Yufen Yu (1): readahead: introduce FMODE_CTL_WILLNEED to read first 2MB of file ZhaoLong Wang (2): VFS: Rolling Back the fmode macro definition and structure members selftests/bpf: Update the demo file_read_pattern to run on libbpf 1.0+ fs/ext4/file.c | 4 + fs/read_write.c | 38 +++++ fs/xfs/xfs_file.c | 3 + include/linux/fs.h | 37 +++++ include/trace/events/fs.h | 33 +++++ mm/readahead.c | 40 ++++- tools/testing/selftests/bpf/Makefile | 1 + .../testing/selftests/bpf/file_read_pattern.c | 76 ++++++++++ .../bpf/progs/file_read_pattern_prog.c | 137 ++++++++++++++++++ 9 files changed, 368 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/fs.h create mode 100644 tools/testing/selftests/bpf/file_read_pattern.c create mode 100644 tools/testing/selftests/bpf/progs/file_read_pattern_prog.c -- 2.39.2

1 8

[PATCH V3 OLK-6.6 0/8] Spark SQL scenario bpf readahead optimization synchronization to OLK-6.6
by ZhaoLong Wang 08 Jan '24

08 Jan '24

CONFIG: CONFIG_DEBUG_INFO_BTF=y CONFIG_BPF_SYSCALL=y CONFIG_NF_CONNTRACK=y CONFIG_NF_CONNTRACK_MARK=y V2: - Using helpers function, such as i_size_read(), round_up - Fix commit log Signature - Fix the user-mode test program V3 - Do not use the round_up helper function. Use the correct calculation. - err = -errno before printf Hou Tao (5): vfs: add bare tracepoints for vfs read and release fs: add helper fs_file_read_do_trace() xfs: add trace for read and release of regular file ext4: add trace for the read and release of regular file selftests/bpf: add demo for file read pattern detection Yufen Yu (1): readahead: introduce FMODE_CTL_WILLNEED to read first 2MB of file ZhaoLong Wang (2): VFS: Rolling Back the fmode macro definition and structure members selftests/bpf: Update the demo file_read_pattern to run on libbpf 1.0+ fs/ext4/file.c | 4 + fs/read_write.c | 38 +++++ fs/xfs/xfs_file.c | 3 + include/linux/fs.h | 37 +++++ include/trace/events/fs.h | 33 +++++ mm/readahead.c | 40 ++++- tools/testing/selftests/bpf/Makefile | 1 + .../testing/selftests/bpf/file_read_pattern.c | 76 ++++++++++ .../bpf/progs/file_read_pattern_prog.c | 137 ++++++++++++++++++ 9 files changed, 368 insertions(+), 1 deletion(-) create mode 100644 include/trace/events/fs.h create mode 100644 tools/testing/selftests/bpf/file_read_pattern.c create mode 100644 tools/testing/selftests/bpf/progs/file_read_pattern_prog.c -- 2.39.2

2 9

[PATCH OLK-5.10 00/11] md/raid1-10: limit the number of plugged bio
by Li Lingfeng 08 Jan '24

08 Jan '24

Too many plugged bios may affect IO performance and cost too much memory, so limit the number of it. Li Lingfeng (1): Revert "md/raid10: fix softlockup in raid10_unplug" Mariusz Tkaczyk (2): md: drop queue limitation for RAID1 and RAID10 md: raid1/raid10: drop pending_cnt Yu Kuai (8): md/raid10: prevent soft lockup while flush writes md/raid1-10: factor out a helper to add bio to plug md/raid1-10: factor out a helper to submit normal write md/raid1-10: submit write io directly if bitmap is not enabled md/md-bitmap: add a new helper to unplug bitmap asynchrously md/raid1-10: don't handle pluged bio by daemon thread md/raid1-10: limit the number of plugged bio md/raid1-10: fix casting from randomized structure in raid1_submit_write() drivers/md/md-bitmap.c | 33 +++++++++++++++++-- drivers/md/md-bitmap.h | 8 +++++ drivers/md/md.c | 9 +++++ drivers/md/md.h | 1 + drivers/md/raid1-10.c | 74 ++++++++++++++++++++++++++++++++++++++---- drivers/md/raid1.c | 46 +++----------------------- drivers/md/raid1.h | 1 - drivers/md/raid10.c | 65 +++++-------------------------------- drivers/md/raid10.h | 1 - 9 files changed, 130 insertions(+), 108 deletions(-) -- 2.31.1

1 11

[PATCH openEuler-22.03-LTS-SP2 0/4] ext4: fix some ext4_lblk_t overflow issues
by Baokun Li 08 Jan '24

08 Jan '24

Baokun Li (4): ext4: add two helper functions extent_logical_end() and pa_logical_end() ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow ext4: avoid overlapping preallocations due to overflow ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS fs/ext4/mballoc.c | 55 ++++++++++++++++++++++------------------------- fs/ext4/mballoc.h | 14 ++++++++++++ 2 files changed, 40 insertions(+), 29 deletions(-) -- 2.31.1

2 5

[PATCH openEuler-1.0-LTS] nvme: sanitize metadata bounce buffer for reads
by Li Lingfeng 08 Jan '24

08 Jan '24

From: Keith Busch <kbusch(a)kernel.org> mainline inclusion from mainline-v6.1-rc1 commit 2b32c76e2b0154b98b9322ae7546b8156cd703e6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8UJF0 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- User can request more metadata bytes than the device will write. Ensure kernel buffer is initialized so we're not leaking unsanitized memory on the copy-out. Fixes: 0b7f1f26f95a51a ("nvme: use the block layer for userspace passthrough metadata") Reviewed-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Kanchan Joshi <joshi.k(a)samsung.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Conflicts: Commit 2405252a680e ("nvme: move the ioctl code to a separate file") move nvme_add_user_metadata() from drivers/nvme/host/core.c to drivers/nvme/host/ioctl.c; Commit 38c0ddab7b93 ("nvme: refactor nvme_add_user_metadata") changed to use REQ_OP_DRV_OUT to identify the write request. Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/nvme/host/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 151ab076822b..b4d8aa84b744 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -856,9 +856,13 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf, if (!buf) goto out; - ret = -EFAULT; - if (write && copy_from_user(buf, ubuf, len)) - goto out_free_meta; + if (write) { + ret = -EFAULT; + if (copy_from_user(buf, ubuf, len)) + goto out_free_meta; + } else { + memset(buf, 0, len); + } bip = bio_integrity_alloc(bio, GFP_KERNEL, 1); if (IS_ERR(bip)) { -- 2.31.1

2 1

[PATCH OLK-6.6 v4 0/5] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 08 Jan '24

08 Jan '24

Both writing a mounted device and writing part0 while mounting a partition will provide a prompt message. v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. Li Lingfeng (5): block: Count bd_writers regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted block/Kconfig | 19 ++++++++ block/bdev.c | 100 +++++++++++++++++++++++++++++++++----- include/linux/blk_types.h | 1 + 3 files changed, 107 insertions(+), 13 deletions(-) -- 2.31.1

2 6

[PATCH OLK-5.10] nvme: sanitize metadata bounce buffer for reads
by Li Lingfeng 08 Jan '24

08 Jan '24

From: Keith Busch <kbusch(a)kernel.org> mainline inclusion from mainline-v6.1-rc1 commit 2b32c76e2b0154b98b9322ae7546b8156cd703e6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8UHPD CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ---------------------------------------- User can request more metadata bytes than the device will write. Ensure kernel buffer is initialized so we're not leaking unsanitized memory on the copy-out. Fixes: 0b7f1f26f95a51a ("nvme: use the block layer for userspace passthrough metadata") Reviewed-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Kanchan Joshi <joshi.k(a)samsung.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Conflicts: Commit 2405252a680e ("nvme: move the ioctl code to a separate file") move nvme_add_user_metadata() from drivers/nvme/host/core.c to drivers/nvme/host/ioctl.c; Commit 38c0ddab7b93 ("nvme: refactor nvme_add_user_metadata") changed to use REQ_OP_DRV_OUT to identify the write request. Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- drivers/nvme/host/core.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 32e08f287602..142f3a03509c 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -966,9 +966,13 @@ static void *nvme_add_user_metadata(struct bio *bio, void __user *ubuf, if (!buf) goto out; - ret = -EFAULT; - if (write && copy_from_user(buf, ubuf, len)) - goto out_free_meta; + if (write) { + ret = -EFAULT; + if (copy_from_user(buf, ubuf, len)) + goto out_free_meta; + } else { + memset(buf, 0, len); + } bip = bio_integrity_alloc(bio, GFP_KERNEL, 1); if (IS_ERR(bip)) { -- 2.31.1

2 1

[PATCH OLK-6.6 0/9] Add swap control for memcg
by Jinjiang Tu 08 Jan '24

08 Jan '24

This series patches add swap control for memory cgroup. Patch[1] add page type in memory.reclaim interface to support reclaim anon pages. Patch[3] add memory.force_swapin interface to support swap back pages proactively. Patch[4-6] add memory.swapfile interface to limit available swap device for memory cgroup. Patch[7] add memory.swap.max interface to limit usage of swap for memory cgroup. Jinjiang Tu (1): memcg: make sysctl registration more extensible Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default zhaoxiaoqiang11 (1): memcg/swap: add ability to disable memcg swap .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 10 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 35 ++ include/linux/mm.h | 4 + include/linux/swap.h | 12 +- include/linux/swap_slots.h | 2 +- init/Kconfig | 9 + mm/madvise.c | 31 +- mm/memcontrol.c | 497 +++++++++++++++++- mm/swap_slots.c | 151 +++++- mm/swapfile.c | 97 +++- mm/vmscan.c | 9 + 14 files changed, 813 insertions(+), 49 deletions(-) -- 2.25.1

1 9

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 08 Jan '24

08 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

2 2

[PATCH OLK-6.6 0/1] arm64: Add non nmi ipi backtrace support
by Liao Chen 08 Jan '24

08 Jan '24

From: linruizhe <linruizhe(a)huawei.com> Dependencies: CONFIG_DETECT_HUNG_TASK=y CONFIG_WATCHDOG=y Li Zhengyu (1): arm64: Add non nmi ipi backtrace support arch/arm64/Kconfig | 8 +++++ arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/kernel/ipi_nmi.c | 41 ++++++++++++++++++++++---- 3 files changed, 45 insertions(+), 5 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6 V1 00/12] sched: basic infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

sched: basic infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH v3 OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 08 Jan '24

08 Jan '24

v2 -> v3 - fix code style and commit messages v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: add ETMEM feature CONFIG to mm/Kconfig etmem: add ETMEM scan feature CONFIG to mm/Kconfig mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

[PATCH OLK-6.6 0/9] Add swap control for memcg
by Jinjiang Tu 08 Jan '24

08 Jan '24

This series patches add swap control for memory cgroup. Patch[1] add page type in memory.reclaim interface to support reclaim anon pages. Patch[3] add memory.force_swapin interface to support swap back pages proactively. Patch[4-6] add memory.swapfile interface to limit available swap device for memory cgroup. Patch[7] add memory.swap.max interface to limit usage of swap for memory cgroup. Jinjiang Tu (1): memcg: make sysctl registeration more extensible Liu Shixin (7): memcg: add page type to memory.reclaim interface memcg: introduce memcg swap qos feature memcg: introduce per-memcg swapin interface memcg: add restrict to swap to cgroup1 mm/swapfile: introduce per-memcg swapfile control mm: swap_slots: add per-type slot cache config: enable memcg swap qos for x86_64 and arm64 by default zhaoxiaoqiang11 (1): memcg/swap: add ability to disable memcg swap .../admin-guide/cgroup-v1/memory.rst | 3 + Documentation/admin-guide/cgroup-v2.rst | 10 +- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 35 ++ include/linux/mm.h | 4 + include/linux/swap.h | 12 +- include/linux/swap_slots.h | 2 +- init/Kconfig | 9 + mm/madvise.c | 31 +- mm/memcontrol.c | 497 +++++++++++++++++- mm/swap_slots.c | 151 +++++- mm/swapfile.c | 97 +++- mm/vmscan.c | 9 + 14 files changed, 813 insertions(+), 49 deletions(-) -- 2.25.1

1 9

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-6.6 V1 00/12] infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 7

[PATCH OLK-6.6 V2 00/12] infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-6.6] scsi: fix use-after-free problem in scsi_remove_target
by Li Nan 08 Jan '24

08 Jan '24

From: Zhong Jinghua <zhongjinghua(a)huawei.com> hulk inclusion category: bugfix bugzilla: 188355, https://gitee.com/openeuler/kernel/issues/I8UF7W ---------------------------------------- A use-after-free problem like below: BUG: KASAN: use-after-free in scsi_target_reap+0x6c/0x70 Workqueue: scsi_wq_1 __iscsi_unbind_session [scsi_transport_iscsi] Call trace: dump_backtrace+0x0/0x320 show_stack+0x24/0x30 dump_stack+0xdc/0x128 print_address_description+0x68/0x278 kasan_report+0x1e4/0x308 __asan_report_load4_noabort+0x30/0x40 scsi_target_reap+0x6c/0x70 scsi_remove_target+0x430/0x640 __iscsi_unbind_session+0x164/0x268 [scsi_transport_iscsi] process_one_work+0x67c/0x1350 worker_thread+0x370/0xf90 kthread+0x2a4/0x320 ret_from_fork+0x10/0x18 The problem is caused by a concurrency scenario: T0: delete target // echo 1 > /sys/devices/platform/host1/session1/target1:0:0/1:0:0:1/delete T1: logout // iscsiadm -m node --logout T0 T1 sdev_store_delete scsi_remove_device device_remove_file __scsi_remove_device __iscsi_unbind_session scsi_remove_target spin_lock_irqsave list_for_each_entry scsi_target_reap // starget->reap_ref 1 -> 0 kref_get(&starget->reap_ref); // warn use-after-free. spin_unlock_irqrestore scsi_target_reap_ref_release scsi_target_destroy ... // delete starget scsi_target_reap // UAF When T0 reduces the reference count to 0, but has not been released, T1 can still enter list_for_each_entry, and then kref_get reports UAF. Fix it by using kref_get_unless_zero() to check for a reference count of 0. Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> Signed-off-by: Li Nan <linan122(a)huawei.com> --- drivers/scsi/scsi_sysfs.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 24f6eefb6803..8fccf2df17f7 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -1584,7 +1584,16 @@ void scsi_remove_target(struct device *dev) starget->state == STARGET_CREATED_REMOVE) continue; if (starget->dev.parent == dev || &starget->dev == dev) { - kref_get(&starget->reap_ref); + /* + * If the reference count is already zero, skip + * this target. Calling kref_get_unless_zero() if + * the reference count is zero is safe because + * scsi_target_destroy() will wait until the host + * lock has been released before freeing starget. + */ + if (!kref_get_unless_zero(&starget->reap_ref)) + continue; + if (starget->state == STARGET_CREATED) starget->state = STARGET_CREATED_REMOVE; else -- 2.39.2

2 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 08 Jan '24

08 Jan '24

v2 -> v3 - edit commit message - adjust defconfig v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: a tiered memory manager etmem: etmem scan, the page hotness tracker mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature mm: Export symbol reclaim_pages etmem: add etmem swap feature etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 08 Jan '24

08 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Pavel Emelyanov <xemul(a)parallels.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 2 ++ include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 ++++ kernel/pid.c | 57 +++++++++++++++++++++++++++++++++++ kernel/pid_namespace.c | 13 ++++++++ kernel/sysctl.c | 2 ++ kernel/trace/pid_list.c | 4 +++ kernel/trace/trace.c | 4 +++ kernel/trace/trace.h | 2 ++ 9 files changed, 93 insertions(+) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..8c07d158bb54 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default y + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..4e9267988dd7 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -45,6 +45,10 @@ #include <net/sock.h> #include <uapi/linux/pidfd.h> +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +#include <linux/kmemleak.h> +#endif + struct pid init_struct_pid = { .count = REFCOUNT_INIT(1), .tasks = { @@ -59,12 +63,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +91,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +208,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +252,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +668,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -658,6 +709,9 @@ void __init pid_idr_init(void) PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +719,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..c837b1096dcb 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,7 +309,9 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", @@ -310,7 +319,11 @@ static struct ctl_table pid_ns_ctl_table[] = { .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, .extra1 = SYSCTL_ZERO, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..e84df0818517 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,6 +1809,7 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, @@ -1818,6 +1819,7 @@ static struct ctl_table kern_table[] = { .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..8056d7441d05 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,7 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

1 0

[PATCH OLK-6.6 v2 0/2] kabi reserve for memcg and cgroup_bpf
by Lu Jialin 08 Jan '24

08 Jan '24

v2->v1: 1)change the kabi reserve number for struct cgroup_bpf. 2)delete the reserve for memcg_vmstats{percpu} Lu Jialin (2): memcg/kabi: reserve space for memcg related structures cgroup_bpf/kabi: reserve space for cgroup_bpf releated structure include/linux/bpf-cgroup-defs.h | 20 ++++++++++++++++++++ include/linux/bpf.h | 11 +++++++++++ include/linux/memcontrol.h | 25 +++++++++++++++++++++++++ 3 files changed, 56 insertions(+) -- 2.34.1

2 3

[PATCH openEuler-22.03-LTS-SP2 0/4] ext4: fix some ext4_lblk_t overflow issues
by Baokun Li 08 Jan '24

08 Jan '24

Baokun Li (4): ext4: add two helper functions extent_logical_end() and pa_logical_end() ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow ext4: avoid overlapping preallocations due to overflow ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS fs/ext4/mballoc.c | 55 ++++++++++++++++++++++------------------------- fs/ext4/mballoc.h | 14 ++++++++++++ 2 files changed, 40 insertions(+), 29 deletions(-) -- 2.31.1

1 4

[PATCH OLK-5.10 RESEND 0/4] ext4: fix some ext4_lblk_t overflow issues
by Baokun Li 08 Jan '24

08 Jan '24

Baokun Li (4): ext4: add two helper functions extent_logical_end() and pa_logical_end() ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow ext4: avoid overlapping preallocations due to overflow ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS fs/ext4/mballoc.c | 55 ++++++++++++++++++++++------------------------- fs/ext4/mballoc.h | 14 ++++++++++++ 2 files changed, 40 insertions(+), 29 deletions(-) -- 2.31.1

1 4

[PATCH OLK-6.6] pid_ns: Make pid_max per namespace
by Yi Yang 08 Jan '24

08 Jan '24

From: Li Zefan <lizefan(a)huawei.com> euler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8TCPY ------------------------------------------------- The adjusted pid_max on the host also takes effect in the container. Move pid_max to pid_namespace to fix this problem. Signed-off-by: Pavel Emelyanov <xemul(a)parallels.com> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- include/linux/pid.h | 2 ++ include/linux/pid_namespace.h | 3 ++ init/Kconfig | 6 ++++ kernel/pid.c | 58 ++++++++++++++++++++++++++++++++++- kernel/pid_namespace.c | 14 ++++++++- kernel/sysctl.c | 4 ++- kernel/trace/pid_list.c | 5 ++- kernel/trace/trace.c | 4 +++ kernel/trace/trace.h | 2 ++ 9 files changed, 94 insertions(+), 4 deletions(-) diff --git a/include/linux/pid.h b/include/linux/pid.h index 653a527574c4..b90bc447d2a2 100644 --- a/include/linux/pid.h +++ b/include/linux/pid.h @@ -113,8 +113,10 @@ extern void transfer_pid(struct task_struct *old, struct task_struct *new, struct pid_namespace; extern struct pid_namespace init_pid_ns; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; extern int pid_max_min, pid_max_max; +#endif /* * look up a PID in the hash table. Must be called with the tasklist_lock diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h index f9f9931e02d6..0a7c6dab0b7b 100644 --- a/include/linux/pid_namespace.h +++ b/include/linux/pid_namespace.h @@ -36,6 +36,9 @@ struct pid_namespace { #endif struct user_namespace *user_ns; struct ucounts *ucounts; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max; +#endif int reboot; /* group exit code if this pidns was rebooted */ struct ns_common ns; #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..54cdea06cf82 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -2104,3 +2104,9 @@ config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE # <asm/syscall_wrapper.h>. config ARCH_HAS_SYSCALL_WRAPPER def_bool n + +config PID_MAX_PER_NAMESPACE + bool "Make pid_max per namespace" + default y + help + Say Y here to enable make pid_max per namespace. diff --git a/kernel/pid.c b/kernel/pid.c index 383abde0c208..209f788a3a6f 100644 --- a/kernel/pid.c +++ b/kernel/pid.c @@ -45,6 +45,10 @@ #include <net/sock.h> #include <uapi/linux/pidfd.h> +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +#include <linux/kmemleak.h> +#endif + struct pid init_struct_pid = { .count = REFCOUNT_INIT(1), .tasks = { @@ -59,12 +63,19 @@ struct pid init_struct_pid = { }, } }; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max = PID_MAX_DEFAULT; +#endif #define RESERVED_PIDS 300 +#ifndef CONFIG_PID_MAX_PER_NAMESPACE int pid_max_min = RESERVED_PIDS + 1; int pid_max_max = PID_MAX_LIMIT; +#else +static int pid_max_min = RESERVED_PIDS + 1; +static int pid_max_max = PID_MAX_LIMIT; +#endif /* * PID-map pages start out as NULL, they get allocated upon @@ -80,6 +91,9 @@ struct pid_namespace init_pid_ns = { .child_reaper = &init_task, .user_ns = &init_user_ns, .ns.inum = PROC_PID_INIT_INO, +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + .pid_max = PID_MAX_DEFAULT, +#endif #ifdef CONFIG_PID_NS .ns.ops = &pidns_operations, #endif @@ -194,7 +208,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, tid = set_tid[ns->level - i]; retval = -EINVAL; +#ifndef CONFIG_PID_MAX_PER_NAMESPACE if (tid < 1 || tid >= pid_max) +#else + if (tid < 1 || tid >= task_active_pid_ns(current)->pid_max) +#endif goto out_free; /* * Also fail if a PID != 1 is requested and @@ -234,7 +252,11 @@ struct pid *alloc_pid(struct pid_namespace *ns, pid_t *set_tid, * a partially initialized PID (see below). */ nr = idr_alloc_cyclic(&tmp->idr, NULL, pid_min, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE pid_max, GFP_ATOMIC); +#else + tmp->pid_max, GFP_ATOMIC); +#endif } spin_unlock_irq(&pidmap_lock); idr_preload_end(); @@ -646,8 +668,37 @@ SYSCALL_DEFINE2(pidfd_open, pid_t, pid, unsigned int, flags) return fd; } +#ifdef CONFIG_PID_MAX_PER_NAMESPACE +static int proc_dointvec_pidmax(struct ctl_table *table, int write, + void __user *buffer, size_t *lenp, loff_t *ppos) +{ + struct ctl_table tmp; + + tmp = *table; + tmp.data = &task_active_pid_ns(current)->pid_max; + + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); +} + +static struct ctl_table pid_ctl_table[] = { + { + .procname = "pid_max", + .data = &init_pid_ns.pid_max, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec_pidmax, + .extra1 = &pid_max_min, + .extra2 = &pid_max_max, + }, + {} +}; +#endif + void __init pid_idr_init(void) { +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + int pid_max = init_pid_ns.pid_max; +#endif /* Verify no one has done anything silly: */ BUILD_BUG_ON(PID_MAX_LIMIT >= PIDNS_ADDING); @@ -657,7 +708,9 @@ void __init pid_idr_init(void) pid_max_min = max_t(int, pid_max_min, PIDS_PER_CPU_MIN * num_possible_cpus()); pr_info("pid_max: default: %u minimum: %u\n", pid_max, pid_max_min); - +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + init_pid_ns.pid_max = pid_max; +#endif idr_init(&init_pid_ns.idr); init_pid_ns.pid_cachep = kmem_cache_create("pid", @@ -665,6 +718,9 @@ void __init pid_idr_init(void) __alignof__(struct pid), SLAB_HWCACHE_ALIGN | SLAB_PANIC | SLAB_ACCOUNT, NULL); +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + register_sysctl_init("kernel", pid_ctl_table); +#endif } static struct file *__pidfd_fget(struct task_struct *task, int fd) diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index 619972c78774..eb862622ef98 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -110,6 +110,9 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns ns->user_ns = get_user_ns(user_ns); ns->ucounts = ucounts; ns->pid_allocated = PIDNS_ADDING; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + ns->pid_max = parent_pid_ns->pid_max; +#endif #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE) ns->memfd_noexec_scope = pidns_memfd_noexec_scope(parent_pid_ns); #endif @@ -295,6 +298,10 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, next = idr_get_cursor(&pid_ns->idr) - 1; tmp.data = &next; +#ifdef CONFIG_PID_MAX_PER_NAMESPACE + tmp.extra2 = &pid_ns->pid_max; +#endif + ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); if (!ret && write) idr_set_cursor(&pid_ns->idr, next + 1); @@ -302,15 +309,20 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, return ret; } +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", .maxlen = sizeof(int), .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, +#ifndef CONFIG_PID_MAX_PER_NAMESPACE .extra1 = SYSCTL_ZERO, - .extra2 = &pid_max, +#else + .extra2 = &init_pid_ns.pid_max, +#endif }, { } }; diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 354a2d294f52..bd620917cc2f 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -1809,15 +1809,17 @@ static struct ctl_table kern_table[] = { .proc_handler = proc_dointvec, }, #endif +#ifndef CONFIG_PID_MAX_PER_NAMESPACE { .procname = "pid_max", .data = &pid_max, - .maxlen = sizeof (int), + .maxlen = sizeof(int), .mode = 0644, .proc_handler = proc_dointvec_minmax, .extra1 = &pid_max_min, .extra2 = &pid_max_max, }, +#endif { .procname = "panic_on_oops", .data = &panic_on_oops, diff --git a/kernel/trace/pid_list.c b/kernel/trace/pid_list.c index 95106d02b32d..53ab2c1fe4ae 100644 --- a/kernel/trace/pid_list.c +++ b/kernel/trace/pid_list.c @@ -414,8 +414,11 @@ struct trace_pid_list *trace_pid_list_alloc(void) int i; /* According to linux/thread.h, pids can be no bigger that 30 bits */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE WARN_ON_ONCE(pid_max > (1 << 30)); - +#else + WARN_ON_ONCE(task_active_pid_ns(current)->pid_max > (1 << 30)); +#endif pid_list = kzalloc(sizeof(*pid_list), GFP_KERNEL); if (!pid_list) return NULL; diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index b656cab67f67..5afa58302b06 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -5423,7 +5423,11 @@ int set_tracer_flag(struct trace_array *tr, unsigned int mask, int enabled) if (mask == TRACE_ITER_RECORD_TGID) { if (!tgid_map) { +#ifndef CONFIG_PID_MAX_PER_NAMESPACE tgid_map_max = pid_max; +#else + tgid_map_max = init_pid_ns.pid_max; +#endif map = kvcalloc(tgid_map_max + 1, sizeof(*tgid_map), GFP_KERNEL); diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h index d608f6128704..52123df262b2 100644 --- a/kernel/trace/trace.h +++ b/kernel/trace/trace.h @@ -695,7 +695,9 @@ extern unsigned long tracing_thresh; /* PID filtering */ +#ifndef CONFIG_PID_MAX_PER_NAMESPACE extern int pid_max; +#endif bool trace_find_filtered_pid(struct trace_pid_list *filtered_pids, pid_t search_pid); -- 2.25.1

2 1

[PATCH OLK-6.6 V2 00/12] infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATH OLK-6.6 v2 0/2] kabi reserve for memcg and cgroup_bpf
by Lu Jialin 08 Jan '24

08 Jan '24

v2->v1: 1)change the kabi reserve number for struct cgroup_bpf. 2)delete the reserve for memcg_vmstats{percpu} Lu Jialin (2): memcg/kabi: reserve space for memcg related structures cgroup_bpf/kabi: reserve space for cgroup_bpf releated structure include/linux/bpf-cgroup-defs.h | 20 ++++++++++++++++++++ include/linux/bpf.h | 11 +++++++++++ include/linux/memcontrol.h | 25 +++++++++++++++++++++++++ 3 files changed, 56 insertions(+) -- 2.34.1

1 2

[PATCH OLK-6.6 V2 00/12] infrastructure for scheduler bpf
by Guan Jing 08 Jan '24

08 Jan '24

infrastructure for scheduler bpf Guan Jing (12): sched: programmable: Introduce bpf sched sched: programmable: Add a tag for the task sched: programmable: Add a tag for the task group sched: programmable: Add user interface of task group tag sched: programmable: Add user interface of task tag sched: basic infrastructure for scheduler bpf sched: introduce bpf_sched_enable() libbpf: add support for scheduler bpf programs bpftool: recognize scheduler programs sched: Add helper functions to get cpu statistics sched: programmable: Add hook in select_task_rq_fair() sched: programmable: Add hook in can_migrate_task() arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/proc/base.c | 64 ++++++++++++++ include/linux/bpf_sched.h | 50 +++++++++++ include/linux/bpf_types.h | 4 + include/linux/sched.h | 39 +++++++++ include/linux/sched_hook_defs.h | 4 + include/uapi/linux/bpf.h | 9 ++ init/init_task.c | 3 + kernel/bpf/Kconfig | 12 +++ kernel/bpf/btf.c | 1 + kernel/bpf/syscall.c | 27 ++++++ kernel/bpf/trampoline.c | 1 + kernel/bpf/verifier.c | 11 ++- kernel/sched/bpf_sched.c | 102 +++++++++++++++++++++ kernel/sched/build_utility.c | 4 + kernel/sched/core.c | 117 +++++++++++++++++++++++++ kernel/sched/fair.c | 46 ++++++++++ kernel/sched/sched.h | 10 +++ scripts/bpf_doc.py | 4 + tools/include/uapi/linux/bpf.h | 9 ++ tools/lib/bpf/bpf.c | 1 + tools/lib/bpf/libbpf.c | 23 ++++- tools/lib/bpf/libbpf.h | 2 + tools/lib/bpf/libbpf.map | 1 + 25 files changed, 544 insertions(+), 2 deletions(-) create mode 100644 include/linux/bpf_sched.h create mode 100644 include/linux/sched_hook_defs.h create mode 100644 kernel/sched/bpf_sched.c -- 2.34.1

1 12

[PATCH OLK-5.10 0/4] ext4: fix some ext4_lblk_t overflow issues
by Baokun Li 08 Jan '24

08 Jan '24

Baokun Li (4): ext4: add two helper functions extent_logical_end() and pa_logical_end() ext4: fix BUG in ext4_mb_new_inode_pa() due to overflow ext4: avoid overlapping preallocations due to overflow ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS fs/ext4/mballoc.c | 55 ++++++++++++++++++++++------------------------- fs/ext4/mballoc.h | 14 ++++++++++++ 2 files changed, 40 insertions(+), 29 deletions(-) -- 2.31.1

1 4

[PATCH OLK-6.6 v2 0/2] ext4: fix slab-out-of-bounds in ext4_find_extent()
by Baokun Li 08 Jan '24

08 Jan '24

yangerkun (2): ext4: avoid recheck extent for EXT4_EX_FORCE_CACHE ext4: check magic even the extent block bh is verified fs/ext4/extents.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) -- 2.31.1

2 3

[PATCH OLK-6.6 v2] aio: add timeout validity check for io_[p]getevents
by Baokun Li 08 Jan '24

08 Jan '24

From: "zhangyi (F)" <yi.zhang(a)huawei.com> maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U48M CVE: NA Reference: https://lore.kernel.org/lkml/1564451504-27906-1-git-send-email-yi.zhang@hua… --------------------------- io_[p]getevents syscall should return -EINVAL if timeout is out of range, add this validity check. Signed-off-by: zhangyi (F) <yi.zhang(a)huawei.com> Reviewed-by: Jeff Moyer <jmoyer(a)redhat.com> Cc: Jeff Moyer <jmoyer(a)redhat.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Deepa Dinamani <deepa.kernel(a)gmail.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/aio.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index f8589caef9c1..73555729bc36 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -2170,10 +2170,17 @@ static long do_io_getevents(aio_context_t ctx_id, struct io_event __user *events, struct timespec64 *ts) { - ktime_t until = ts ? timespec64_to_ktime(*ts) : KTIME_MAX; - struct kioctx *ioctx = lookup_ioctx(ctx_id); + ktime_t until = KTIME_MAX; + struct kioctx *ioctx = NULL; long ret = -EINVAL; + if (ts) { + if (!timespec64_valid(ts)) + return ret; + until = timespec64_to_ktime(*ts); + } + + ioctx = lookup_ioctx(ctx_id); if (likely(ioctx)) { if (likely(min_nr <= nr && min_nr >= 0)) ret = read_events(ioctx, min_nr, nr, events, until); -- 2.31.1

2 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 08 Jan '24

08 Jan '24

v2 -> v3 - fix git message style - fix etmem scan and swap config v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: a tiered memory manager etmem: etmem scan, the page hotness tracker mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature to openEuler mm: Export symbol reclaim_pages etmem: add etmem swap feature to openEuler etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

1 10

[PATCH OLK-6.6 v2] pipe: Fix endless sleep problem due to the out-of-order
by Baokun Li 08 Jan '24

08 Jan '24

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U3TT --------------------------- Thers is a out-of-order access problem which would cause endless sleep when we use pipe with epoll. The story is following, we assume the ring size is 2, the ring head is 1, the ring tail is 0, task0 is write task, task1 is read task, task2 is write task. Task0 Task1 Task2 epoll_ctl(fd, EPOLL_CTL_ADD, ...) pipe_poll() poll_wait() tail = READ_ONCE(pipe->tail); // Re-order and get tail=0 pipe_read tail++ //tail=1 pipe_write head++ //head=2 head = READ_ONCE(pipe->head); // head = 2 check ring is full by head - tail Task0 get head = 2 and tail = 0, so it mistake that the pipe ring is full, then task0 is not add into ready list. If the ring is not full anymore, task0 would not be woken up forever. The reason of this problem is that we got inconsistent head/tail value of the pipe ring, so we fix the problem by getting them protected. Signed-off-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/pipe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/pipe.c b/fs/pipe.c index 139190165a1c..34752ba942ab 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -672,8 +672,10 @@ pipe_poll(struct file *filp, poll_table *wait) * if something changes and you got it wrong, the poll * table entry will wake you up and fix it. */ + spin_lock_irq(&pipe->rd_wait.lock); head = READ_ONCE(pipe->head); tail = READ_ONCE(pipe->tail); + spin_unlock_irq(&pipe->rd_wait.lock); mask = 0; if (filp->f_mode & FMODE_READ) { -- 2.31.1

2 1

[PATCH openEuler-1.0-LTS] nvmet: nul-terminate the NQNs passed in the connect command
by Cheng Yu 08 Jan '24

08 Jan '24

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v6.7-rc3 commit 1c22e0295a5eb571c27b53c7371f95699ef705ff category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8H4UJ CVE: CVE-2023-6121 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi <zahavi.alon(a)gmail.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Cheng Yu <serein.chengyu(a)huawei.com> --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index d84ae004cb85..637160deb3ac 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -153,6 +153,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) @@ -203,6 +205,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req, &ctrl); -- 2.25.1

2 1

[PATCH OLK-6.6 0/2] ext4: fix slab-out-of-bounds in ext4_find_extent()
by Baokun Li 08 Jan '24

08 Jan '24

yangerkun (2): ext4: avoid recheck extent for EXT4_EX_FORCE_CACHE ext4: check magic even the extent block bh is verified fs/ext4/extents.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) -- 2.31.1

2 3

[PATCH openEuler-1.0-LTS] netfilter: ctnetlink: fix possible refcount leak in ctnetlink_create_conntrack()
by Dong Chenchen 08 Jan '24

08 Jan '24

From: Hangyu Hua <hbh25y(a)gmail.com> stable inclusion from stable-v4.19.275 commit 43b9a9c78e37a5532c2a9260dff9d9989f2bbb23 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8SL4W CVE: CVE-2023-7192 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit ac4893980bbe79ce383daf9a0885666a30fe4c83 ] nf_ct_put() needs to be called to put the refcount got by nf_conntrack_find_get() to avoid refcount leak when nf_conntrack_hash_check_insert() fails. Fixes: 7d367e06688d ("netfilter: ctnetlink: fix soft lockup when netlink adds new entries (v2)") Signed-off-by: Hangyu Hua <hbh25y(a)gmail.com> Acked-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- net/netfilter/nf_conntrack_netlink.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 2850a638401d..58bba2e2691f 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -2056,12 +2056,15 @@ ctnetlink_create_conntrack(struct net *net, err = nf_conntrack_hash_check_insert(ct); if (err < 0) - goto err2; + goto err3; rcu_read_unlock(); return ct; +err3: + if (ct->master) + nf_ct_put(ct->master); err2: rcu_read_unlock(); err1: -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS V1] nvmet: nul-terminate the NQNs passed in the connect command
by Cheng Yu 08 Jan '24

08 Jan '24

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v6.7-rc3 commit 1c22e0295a5eb571c27b53c7371f95699ef705ff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U4HU CVE: CVE-2023-6121 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi <zahavi.alon(a)gmail.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Cheng Yu <serein.chengyu(a)huawei.com> --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index d84ae004cb85..637160deb3ac 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -153,6 +153,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) @@ -203,6 +205,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req, &ctrl); -- 2.25.1

2 1

[PATCH OLK-6.6] cgroup: Export cgroup.stat from cgroupv2 to cgroupv1
by Lu Jialin 07 Jan '24

07 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8U6EM -------------------------------- Export cgroup.stat feature from cgroupv2 to cgroupv1. Therefore, user can get dying descendants cgroup number and descendants number in cgroupv1. --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + init/Kconfig | 5 +++++ kernel/cgroup/cgroup-internal.h | 1 + kernel/cgroup/cgroup-v1.c | 6 ++++++ kernel/cgroup/cgroup.c | 2 +- 6 files changed, 15 insertions(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..1fc527e975be 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -188,6 +188,7 @@ CONFIG_CGROUP_BPF=y # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_CGROUP_V1_KILL=y +CONFIG_CGROUP_V1_STAT=y CONFIG_CGROUP_FILES=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..0980126766cc 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -209,6 +209,7 @@ CONFIG_CGROUP_BPF=y # CONFIG_CGROUP_DEBUG is not set CONFIG_SOCK_CGROUP_DATA=y CONFIG_CGROUP_V1_KILL=y +CONFIG_CGROUP_V1_STAT=y CONFIG_CGROUP_FILES=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y diff --git a/init/Kconfig b/init/Kconfig index 869eea4108d0..fad38e359428 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -1254,6 +1254,11 @@ config CGROUP_V1_KILL default n depends on CGROUPS +config CGROUP_V1_STAT + bool "Getting Cgroup Stat in Cgroup V1" + default n + depends on CGROUPS + config CGROUP_FILES bool "Files Resource Controller for Control Groups" select PAGE_COUNTER diff --git a/kernel/cgroup/cgroup-internal.h b/kernel/cgroup/cgroup-internal.h index d5a197d4b0ec..96a9bd2c26f0 100644 --- a/kernel/cgroup/cgroup-internal.h +++ b/kernel/cgroup/cgroup-internal.h @@ -266,6 +266,7 @@ int cgroup_task_count(const struct cgroup *cgrp); ssize_t cgroup_kill_write(struct kernfs_open_file *of, char *buf, size_t nbytes, loff_t off); +int cgroup_stat_show(struct seq_file *seq, void *v); /* * rstat.c diff --git a/kernel/cgroup/cgroup-v1.c b/kernel/cgroup/cgroup-v1.c index 622398d492b6..ece2f4e17197 100644 --- a/kernel/cgroup/cgroup-v1.c +++ b/kernel/cgroup/cgroup-v1.c @@ -666,6 +666,12 @@ struct cftype cgroup1_base_files[] = { .flags = CFTYPE_NOT_ON_ROOT, .write = cgroup_kill_write, }, +#endif +#ifdef CONFIG_CGROUP_V1_STAT + { + .name = "cgroup.stat", + .seq_show = cgroup_stat_show, + }, #endif { } /* terminate */ }; diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index cfae217e6e7f..36707df23cfd 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -3657,7 +3657,7 @@ static int cgroup_events_show(struct seq_file *seq, void *v) return 0; } -static int cgroup_stat_show(struct seq_file *seq, void *v) +int cgroup_stat_show(struct seq_file *seq, void *v) { struct cgroup *cgroup = seq_css(seq)->cgroup; -- 2.34.1

2 1

[PATCH hulk-4.19 V1] nvmet: nul-terminate the NQNs passed in the connect command
by Cheng Yu 06 Jan '24

06 Jan '24

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v6.7-rc3 commit 1c22e0295a5eb571c27b53c7371f95699ef705ff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U4HU CVE: CVE-2023-6121 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi <zahavi.alon(a)gmail.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Cheng Yu <serein.chengyu(a)huawei.com> --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index d84ae004cb85..637160deb3ac 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -153,6 +153,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) @@ -203,6 +205,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req, &ctrl); -- 2.25.1

1 0

[PATCH OLK-6.6 0/4] xfs: fix block space problems
by Long Li 06 Jan '24

06 Jan '24

*** BLURB HERE *** This patch set fix block space problems Gao Xiang (1): xfs: account extra freespace btree splits for multiple allocations Guo Xuenan (1): xfs: set minleft correctly for randomly sparse inode allocations yangerkun (2): xfs: fix xfs shutdown since we reserve more blocks in agfl fixup xfs: longest free extent no need consider postalloc fs/xfs/libxfs/xfs_alloc.c | 49 ++++++++++++++++++++++++++++++++------ fs/xfs/libxfs/xfs_alloc.h | 1 + fs/xfs/libxfs/xfs_bmap.c | 1 + fs/xfs/libxfs/xfs_ialloc.c | 3 +++ fs/xfs/xfs_mount.c | 9 +++++++ 5 files changed, 56 insertions(+), 7 deletions(-) -- 2.31.1

2 5

[PATCH hulk-4.19 V1] nvmet: nul-terminate the NQNs passed in the connect command
by Cheng Yu 06 Jan '24

06 Jan '24

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v6.7-rc3 commit 1c22e0295a5eb571c27b53c7371f95699ef705ff category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U4HU CVE: CVE-2023-6121 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The host and subsystem NQNs are passed in the connect command payload and interpreted as nul-terminated strings. Ensure they actually are nul-terminated before using them. Fixes: a07b4970f464 "nvmet: add a generic NVMe target") Reported-by: Alon Zahavi <zahavi.alon(a)gmail.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Cheng Yu <serein.chengyu(a)huawei.com> --- drivers/nvme/target/fabrics-cmd.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/nvme/target/fabrics-cmd.c b/drivers/nvme/target/fabrics-cmd.c index d84ae004cb85..637160deb3ac 100644 --- a/drivers/nvme/target/fabrics-cmd.c +++ b/drivers/nvme/target/fabrics-cmd.c @@ -153,6 +153,8 @@ static void nvmet_execute_admin_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_alloc_ctrl(d->subsysnqn, d->hostnqn, req, le32_to_cpu(c->kato), &ctrl); if (status) @@ -203,6 +205,8 @@ static void nvmet_execute_io_connect(struct nvmet_req *req) goto out; } + d->subsysnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; + d->hostnqn[NVMF_NQN_FIELD_LEN - 1] = '\0'; status = nvmet_ctrl_find_get(d->subsysnqn, d->hostnqn, le16_to_cpu(d->cntlid), req, &ctrl); -- 2.25.1

1 0

[PATCH OLK-6.6] aio: add timeout validity check for io_[p]getevents
by Baokun Li 06 Jan '24

06 Jan '24

From: "zhangyi (F)" <yi.zhang(a)huawei.com> maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U48M CVE: NA Reference: https://lore.kernel.org/lkml/1564451504-27906-1-git-send-email-yi.zhang@hua… --------------------------- io_[p]getevents syscall should return -EINVAL if timeout is out of range, add this validity check. Signed-off-by: zhangyi (F) <yi.zhang(a)huawei.com> Reviewed-by: Jeff Moyer <jmoyer(a)redhat.com> Cc: Jeff Moyer <jmoyer(a)redhat.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Deepa Dinamani <deepa.kernel(a)gmail.com> Signed-off-by: yangerkun <yangerkun(a)huawei.com> Reviewed-by: zhangyi (F) <yi.zhang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/aio.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/aio.c b/fs/aio.c index f8589caef9c1..73555729bc36 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -2170,10 +2170,17 @@ static long do_io_getevents(aio_context_t ctx_id, struct io_event __user *events, struct timespec64 *ts) { - ktime_t until = ts ? timespec64_to_ktime(*ts) : KTIME_MAX; - struct kioctx *ioctx = lookup_ioctx(ctx_id); + ktime_t until = KTIME_MAX; + struct kioctx *ioctx = NULL; long ret = -EINVAL; + if (ts) { + if (!timespec64_valid(ts)) + return ret; + until = timespec64_to_ktime(*ts); + } + + ioctx = lookup_ioctx(ctx_id); if (likely(ioctx)) { if (likely(min_nr <= nr && min_nr >= 0)) ret = read_events(ioctx, min_nr, nr, events, until); -- 2.31.1

2 1

[PATCH OLK-6.6] pipe: Fix endless sleep problem due to the out-of-order
by Baokun Li 06 Jan '24

06 Jan '24

From: yangerkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8U3TT --------------------------- Thers is a out-of-order access problem which would cause endless sleep when we use pipe with epoll. The story is following, we assume the ring size is 2, the ring head is 1, the ring tail is 0, task0 is write task, task1 is read task, task2 is write task. Task0 Task1 Task2 epoll_ctl(fd, EPOLL_CTL_ADD, ...) pipe_poll() poll_wait() tail = READ_ONCE(pipe->tail); // Re-order and get tail=0 pipe_read tail++ //tail=1 pipe_write head++ //head=2 head = READ_ONCE(pipe->head); // head = 2 check ring is full by head - tail Task0 get head = 2 and tail = 0, so it mistake that the pipe ring is full, then task0 is not add into ready list. If the ring is not full anymore, task0 would not be woken up forever. The reason of this problem is that we got inconsistent head/tail value of the pipe ring, so we fix the problem by getting them protected. Signed-off-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Chen Jun <chenjun102(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/pipe.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/pipe.c b/fs/pipe.c index 139190165a1c..34752ba942ab 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -672,8 +672,10 @@ pipe_poll(struct file *filp, poll_table *wait) * if something changes and you got it wrong, the poll * table entry will wake you up and fix it. */ + spin_lock_irq(&pipe->rd_wait.lock); head = READ_ONCE(pipe->head); tail = READ_ONCE(pipe->tail); + spin_unlock_irq(&pipe->rd_wait.lock); mask = 0; if (filp->f_mode & FMODE_READ) { -- 2.31.1

2 1

[PATCH OLK-6.6 v2] openeuler_defconfig: enable erofs ondemand for x86 and arm64
by Baokun Li 06 Jan '24

06 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8RP48 -------------------------------- To support erofs over fscache mode, the following config is enabled by default on x86 and arm64: CONFIG_CACHEFILES_ONDEMAND=y CONFIG_EROFS_FS=m CONFIG_EROFS_FS_XATTR=y CONFIG_EROFS_FS_POSIX_ACL=y CONFIG_EROFS_FS_SECURITY=y CONFIG_EROFS_FS_ONDEMAND=y Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 10 ++++++++-- arch/x86/configs/openeuler_defconfig | 10 ++++++++-- 2 files changed, 16 insertions(+), 4 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 9a053bc885dd..af539123c619 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6874,7 +6874,7 @@ CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_ERROR_INJECTION is not set -# CONFIG_CACHEFILES_ONDEMAND is not set +CONFIG_CACHEFILES_ONDEMAND=y # end of Caches # @@ -6980,7 +6980,13 @@ CONFIG_PSTORE_RAM=m # CONFIG_PSTORE_BLK is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_EROFS_FS is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set +CONFIG_EROFS_FS_ONDEMAND=y CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V2=m diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 4bf011ed6307..3adfcf262f54 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -8068,7 +8068,7 @@ CONFIG_FSCACHE_STATS=y CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_ERROR_INJECTION is not set -# CONFIG_CACHEFILES_ONDEMAND is not set +CONFIG_CACHEFILES_ONDEMAND=y # end of Caches # @@ -8177,7 +8177,13 @@ CONFIG_PSTORE_RAM=m # CONFIG_PSTORE_BLK is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_EROFS_FS is not set +CONFIG_EROFS_FS=m +# CONFIG_EROFS_FS_DEBUG is not set +CONFIG_EROFS_FS_XATTR=y +CONFIG_EROFS_FS_POSIX_ACL=y +CONFIG_EROFS_FS_SECURITY=y +# CONFIG_EROFS_FS_ZIP is not set +CONFIG_EROFS_FS_ONDEMAND=y CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m # CONFIG_NFS_V2 is not set -- 2.31.1

2 1

[PATCH OLK-6.6 00/55] backport mainline md patch
by Li Nan 06 Jan '24

06 Jan '24

v2: - drop lts patches which have been merged. Alex Lyakas (1): md: Whenassemble the array, consult the superblock of the freshest device Denis Plotnikov (1): md-cluster: check for timeout while a new disk adding Gou Hao (1): md/raid1: remove unnecessary null checking Junxiao Bi (2): md: bypass block throttle for superblock update Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d" Justin Stitt (1): md: replace deprecated strncpy with memcpy Li Nan (2): md: factor out a helper exceed_read_errors() to check read_errors md/raid1: support read error check Mariusz Tkaczyk (1): md: do not require mddev_lock() for all options in array_state_store() Yu Kuai (46): md: use separate work_struct for md_start_sync() md: factor out a helper to choose sync action from md_check_recovery() md: delay choosing sync action to md_start_sync() md: factor out a helper rdev_removeable() from remove_and_add_spares() md: factor out a helper rdev_is_spare() from remove_and_add_spares() md: factor out a helper rdev_addable() from remove_and_add_spares() md: delay remove_and_add_spares() for read only array to md_start_sync() md: initialize 'active_io' while allocating mddev md: initialize 'writes_pending' while allocating mddev md-bitmap: remove the checking of 'pers->quiesce' from location_store() md-bitmap: suspend array earlier in location_store() md: don't check 'mddev->pers' from suspend_hi_store() md: don't check 'mddev->pers' and 'pers->quiesce' from suspend_lo_store() md: factor out a helper from mddev_put() md: simplify md_seq_ops md/raid1: don't split discard io for write behind md: use READ_ONCE/WRITE_ONCE for 'suspend_lo' and 'suspend_hi' md/raid5-cache: use READ_ONCE/WRITE_ONCE for 'conf->log' md: replace is_md_suspended() with 'mddev->suspended' in md_check_recovery() md: add new helpers to suspend/resume array md: add new helpers to suspend/resume and lock/unlock array md/dm-raid: use new apis to suspend array md/md-bitmap: use new apis to suspend array for location_store() md/raid5-cache: use new apis to suspend array md/raid5: use new apis to suspend array md: use new apis to suspend array for sysfs apis md: use new apis to suspend array for adding/removing rdev from state_store() md: use new apis to suspend array for ioctls involed array reconfiguration md: use new apis to suspend array before mddev_create/destroy_serial_pool md: cleanup mddev_create/destroy_serial_pool() md/md-linear: cleanup linear_add() md/raid5: replace suspend with quiesce() callback md: suspend array in md_start_sync() if array need reconfiguration md: remove old apis to suspend the array md: rename __mddev_suspend/resume() back to mddev_suspend/resume() md: cleanup pers->prepare_suspend() md: remove flag RemoveSynchronized md/raid10: remove rcu protection to access rdev from conf md/raid1: remove rcu protection to access rdev from conf md/raid5: remove rcu protection to access rdev from conf md/md-multipath: remove rcu protection to access rdev from conf md: synchronize flush io with array reconfiguration md: fix missing flush of sync_work md: fix stopping sync thread md: split MD_RECOVERY_NEEDED out of mddev_resume dm-raid: delay flushing event_work() after reconfig_mutex is released drivers/md/md.h | 75 +-- drivers/md/raid5.h | 4 +- drivers/md/dm-raid.c | 20 +- drivers/md/md-autodetect.c | 4 +- drivers/md/md-bitmap.c | 61 +-- drivers/md/md-cluster.c | 15 +- drivers/md/md-linear.c | 2 - drivers/md/md-multipath.c | 32 +- drivers/md/md.c | 1065 ++++++++++++++++++++---------------- drivers/md/raid1-10.c | 54 ++ drivers/md/raid1.c | 97 ++-- drivers/md/raid10.c | 274 +++------- drivers/md/raid5-cache.c | 75 ++- drivers/md/raid5-ppl.c | 16 +- drivers/md/raid5.c | 306 +++-------- 15 files changed, 980 insertions(+), 1120 deletions(-) -- 2.39.2

2 56

[PATCH OLK-5.10] ext4: fix kernel BUG in 'ext4_write_inline_data_end()'
by Zhihao Cheng 06 Jan '24

06 Jan '24

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v6.2-rc1 commit 5c099c4fdc438014d5893629e70a8ba934433ee8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I8U2KA CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Syzbot report follow issue: ------------[ cut here ]------------ kernel BUG at fs/ext4/inline.c:227! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 3629 Comm: syz-executor212 Not tainted 6.1.0-rc5-syzkaller-00018-g59d0d52c30d4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:ext4_write_inline_data+0x344/0x3e0 fs/ext4/inline.c:227 RSP: 0018:ffffc90003b3f368 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff8880704e16c0 RCX: 0000000000000000 RDX: ffff888021763a80 RSI: ffffffff821e31a4 RDI: 0000000000000006 RBP: 000000000006818e R08: 0000000000000006 R09: 0000000000068199 R10: 0000000000000079 R11: 0000000000000000 R12: 000000000000000b R13: 0000000000068199 R14: ffffc90003b3f408 R15: ffff8880704e1c82 FS: 000055555723e3c0(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffe8ac9080 CR3: 0000000079f81000 CR4: 0000000000350ee0 Call Trace: <TASK> ext4_write_inline_data_end+0x2a3/0x12f0 fs/ext4/inline.c:768 ext4_write_end+0x242/0xdd0 fs/ext4/inode.c:1313 ext4_da_write_end+0x3ed/0xa30 fs/ext4/inode.c:3063 generic_perform_write+0x316/0x570 mm/filemap.c:3764 ext4_buffered_write_iter+0x15b/0x460 fs/ext4/file.c:285 ext4_file_write_iter+0x8bc/0x16e0 fs/ext4/file.c:700 call_write_iter include/linux/fs.h:2191 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_iter_write+0x74/0xa0 fs/read_write.c:902 iter_file_splice_write+0x745/0xc90 fs/splice.c:686 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x114/0x180 fs/splice.c:931 splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886 do_splice_direct+0x1ab/0x280 fs/splice.c:974 do_sendfile+0xb19/0x1270 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x1d0/0x210 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ---[ end trace 0000000000000000 ]--- Above issue may happens as follows: ext4_da_write_begin ext4_da_write_inline_data_begin ext4_da_convert_inline_data_to_extent ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); ext4_da_write_end ext4_run_li_request ext4_mb_prefetch ext4_read_block_bitmap_nowait ext4_validate_block_bitmap ext4_mark_group_bitmap_corrupted(sb, block_group, EXT4_GROUP_INFO_BBITMAP_CORRUPT) percpu_counter_sub(&sbi->s_freeclusters_counter,grp->bb_free); -> sbi->s_freeclusters_counter become zero ext4_da_write_begin if (ext4_nonda_switch(inode->i_sb)) -> As freeclusters_counter is zero will return true *fsdata = (void *)FALL_BACK_TO_NONDELALLOC; ext4_write_begin ext4_da_write_end if (write_mode == FALL_BACK_TO_NONDELALLOC) ext4_write_end if (inline_data) ext4_write_inline_data_end ext4_write_inline_data BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); -> As inode is already convert to extent, so 'pos + len' > inline_size -> then trigger BUG. To solve this issue, instead of checking ext4_has_inline_data() which is only cleared after data has been written back, check the EXT4_STATE_MAY_INLINE_DATA flag in ext4_write_end(). Fixes: f19d5870cbf7 ("ext4: add normal write support for inline data") Reported-by: syzbot+4faa160fa96bfba639f8(a)syzkaller.appspotmail.com Reported-by: Jun Nie <jun.nie(a)linaro.org> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Link: https://lore.kernel.org/r/20221206144134.1919987-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> --- fs/ext4/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 0757f6a6455f..243a2a23015e 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -1294,7 +1294,8 @@ static int ext4_write_end(struct file *file, trace_ext4_write_end(inode, pos, len, copied); - if (ext4_has_inline_data(inode)) + if (ext4_has_inline_data(inode) && + ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) return ext4_write_inline_data_end(inode, pos, len, copied, page); copied = block_write_end(file, mapping, pos, len, copied, page, fsdata); -- 2.31.1

2 1

[PATCH OLK-6.6 v2] block: support to account io_ticks precisely
by Yu Kuai 06 Jan '24

06 Jan '24

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I8RIME CVE: NA ----------------------------------------------- Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. In order to account io_ticks precisely, update_io_ticks() must know if there are IO inflight already, and this requires overhead slightly, hence precise io accounting is disabled by default, and user can enable it through sysfs entry. Noted that for rq-based devcie, part_stat_local_inc/dec() and part_in_flight() is used to track inflight instead of iterating tags, which is not supposed to be used in fast path because 'tags->lock' is grabbed in blk_mq_find_and_get_req(). Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Documentation/ABI/stable/sysfs-block | 8 ++++-- block/blk-core.c | 27 ++++++++++++++++-- block/blk-merge.c | 3 ++ block/blk-mq-debugfs.c | 2 ++ block/blk-mq.c | 12 ++++++-- block/blk-sysfs.c | 42 ++++++++++++++++++++++++++-- block/blk.h | 1 + block/genhd.c | 2 +- include/linux/blk-mq.h | 1 + include/linux/blkdev.h | 3 ++ 10 files changed, 91 insertions(+), 10 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b..e5fedecf7bdf 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -358,8 +358,12 @@ What: /sys/block/<disk>/queue/iostats Date: January 2009 Contact: linux-block(a)vger.kernel.org Description: - [RW] This file is used to control (on/off) the iostats - accounting of the disk. + [RW] This file is used to control the iostats accounting of the + disk. If this value is 0, iostats accounting is disabled; If + this value is 1, iostats accounting is enabled, but io_ticks is + accounted by sampling and the result is not accurate; If this + value is 2, iostats accounting is enabled and io_ticks is + accounted precisely, but there will be slightly overhead. What: /sys/block/<disk>/queue/logical_block_size diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..13a27d1d8540 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -71,6 +71,21 @@ static struct kmem_cache *blk_requestq_cachep; */ static struct workqueue_struct *kblockd_workqueue; +static bool precise_iostat; + +static int __init precise_iostat_setup(char *str) +{ + bool precise; + + if (!strtobool(str, &precise)) { + precise_iostat = precise; + pr_info("precise iostat %d\n", precise_iostat); + } + + return 1; +} +__setup("precise_iostat=", precise_iostat_setup); + /** * blk_queue_flag_set - atomically set a queue flag * @flag: flag to be set @@ -441,6 +456,8 @@ struct request_queue *blk_alloc_queue(int node_id) blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ; + if (precise_iostat) + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); return q; @@ -938,11 +955,15 @@ EXPORT_SYMBOL_GPL(iocb_bio_iopoll); void update_io_ticks(struct block_device *part, unsigned long now, bool end) { unsigned long stamp; + bool precise = blk_queue_precise_io_stat(part->bd_queue); again: stamp = READ_ONCE(part->bd_stamp); - if (unlikely(time_after(now, stamp))) { - if (likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) - __part_stat_add(part, io_ticks, end ? now - stamp : 1); + if (unlikely(time_after(now, stamp)) && + likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) { + if (end || (precise && part_in_flight(part))) + __part_stat_add(part, io_ticks, now - stamp); + else if (!precise) + __part_stat_add(part, io_ticks, 1); } if (part->bd_partno) { part = bdev_whole(part); diff --git a/block/blk-merge.c b/block/blk-merge.c index 65e75efa9bd3..5db8228c46fc 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -783,6 +783,9 @@ static void blk_account_io_merge_request(struct request *req) if (blk_do_io_stat(req)) { part_stat_lock(); part_stat_inc(req->part, merges[op_stat_group(req_op(req))]); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index aa7a1357c3e1..9ad108307344 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -86,6 +86,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(FAIL_IO), QUEUE_FLAG_NAME(NONROT), QUEUE_FLAG_NAME(IO_STAT), + QUEUE_FLAG_NAME(PRECISE_IO_STAT), QUEUE_FLAG_NAME(NOXMERGES), QUEUE_FLAG_NAME(ADD_RANDOM), QUEUE_FLAG_NAME(SYNCHRONOUS), @@ -254,6 +255,7 @@ static const char *const rqf_name[] = { RQF_NAME(FAILED), RQF_NAME(QUIET), RQF_NAME(IO_STAT), + RQF_NAME(PRECISE_IO_STAT), RQF_NAME(PM), RQF_NAME(HASHED), RQF_NAME(STATS), diff --git a/block/blk-mq.c b/block/blk-mq.c index dd7c9e3eca1b..9c894e0d0b19 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -360,8 +360,11 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, if (data->flags & BLK_MQ_REQ_PM) data->rq_flags |= RQF_PM; - if (blk_queue_io_stat(q)) + if (blk_queue_io_stat(q)) { data->rq_flags |= RQF_IO_STAT; + if (blk_queue_precise_io_stat(q)) + data->rq_flags |= RQF_PRECISE_IO_STAT; + } rq->rq_flags = data->rq_flags; if (data->rq_flags & RQF_SCHED_TAGS) { @@ -994,6 +997,9 @@ static inline void blk_account_io_done(struct request *req, u64 now) update_io_ticks(req->part, jiffies, true); part_stat_inc(req->part, ios[sgrp]); part_stat_add(req->part, nsecs[sgrp], now - req->start_time_ns); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } @@ -1001,7 +1007,6 @@ static inline void blk_account_io_done(struct request *req, u64 now) static inline void blk_account_io_start(struct request *req) { trace_block_io_start(req); - if (blk_do_io_stat(req)) { /* * All non-passthrough requests are created from a bio with one @@ -1016,6 +1021,9 @@ static inline void blk_account_io_start(struct request *req) part_stat_lock(); update_io_ticks(req->part, jiffies, false); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_inc(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..d498cf0942d3 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -303,7 +303,6 @@ queue_##name##_store(struct request_queue *q, const char *page, size_t count) \ QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1); QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0); -QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0); QUEUE_SYSFS_BIT_FNS(stable_writes, STABLE_WRITES, 0); #undef QUEUE_SYSFS_BIT_FNS @@ -473,6 +472,45 @@ static ssize_t queue_dax_show(struct request_queue *q, char *page) return queue_var_show(blk_queue_dax(q), page); } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + int val = 0; + + if (blk_queue_io_stat(q)) + val = blk_queue_precise_io_stat(q) ? 2 : 1; + + return sprintf(page, "%u\n", val); +} + +static ssize_t +queue_iostats_store(struct request_queue *q, const char *page, size_t count) +{ + unsigned long nr; + int ret = queue_var_store(&nr, page, count); + + if (ret < 0) + return ret; + + switch (nr) { + case 0: + blk_queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 1: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 2: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + default: + return -EINVAL; + } + + return count; +} + #define QUEUE_RO_ENTRY(_prefix, _name) \ static struct queue_sysfs_entry _prefix##_entry = { \ .attr = { .name = _name, .mode = 0444 }, \ @@ -494,6 +532,7 @@ QUEUE_RO_ENTRY(queue_max_segments, "max_segments"); QUEUE_RO_ENTRY(queue_max_integrity_segments, "max_integrity_segments"); QUEUE_RO_ENTRY(queue_max_segment_size, "max_segment_size"); QUEUE_RW_ENTRY(elv_iosched, "scheduler"); +QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RO_ENTRY(queue_logical_block_size, "logical_block_size"); QUEUE_RO_ENTRY(queue_physical_block_size, "physical_block_size"); @@ -539,7 +578,6 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { }; QUEUE_RW_ENTRY(queue_nonrot, "rotational"); -QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RW_ENTRY(queue_random, "add_random"); QUEUE_RW_ENTRY(queue_stable_writes, "stable_writes"); diff --git a/block/blk.h b/block/blk.h index 08a358bc0919..67915b04b3c1 100644 --- a/block/blk.h +++ b/block/blk.h @@ -344,6 +344,7 @@ static inline bool blk_do_io_stat(struct request *rq) } void update_io_ticks(struct block_device *part, unsigned long now, bool end); +unsigned int part_in_flight(struct block_device *part); static inline void req_set_nomerge(struct request_queue *q, struct request *req) { diff --git a/block/genhd.c b/block/genhd.c index 4a16a424f57d..b3ff653f3e50 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -118,7 +118,7 @@ static void part_stat_read_all(struct block_device *part, } } -static unsigned int part_in_flight(struct block_device *part) +unsigned int part_in_flight(struct block_device *part) { unsigned int inflight = 0; int cpu; diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 3d74f3e5b995..9dfee0644f9c 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -46,6 +46,7 @@ typedef __u32 __bitwise req_flags_t; #define RQF_QUIET ((__force req_flags_t)(1 << 11)) /* account into disk and partition IO statistics */ #define RQF_IO_STAT ((__force req_flags_t)(1 << 13)) +#define RQF_PRECISE_IO_STAT ((__force req_flags_t)(1 << 14)) /* runtime pm request */ #define RQF_PM ((__force req_flags_t)(1 << 15)) /* on IO scheduler merge hash */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9f3bcbcb156d..bea0b5fdac74 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -536,6 +536,7 @@ struct request_queue { #define QUEUE_FLAG_NONROT 6 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 7 /* do disk/partitions IO accounting */ +#define QUEUE_FLAG_PRECISE_IO_STAT 8 /* do disk/partitions IO accounting precisely */ #define QUEUE_FLAG_NOXMERGES 9 /* No extended merges */ #define QUEUE_FLAG_ADD_RANDOM 10 /* Contributes to random pool */ #define QUEUE_FLAG_SYNCHRONOUS 11 /* always completes in submit context */ @@ -576,6 +577,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); #define blk_queue_stable_writes(q) \ test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) +#define blk_queue_precise_io_stat(q) \ + test_bit(QUEUE_FLAG_PRECISE_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) -- 2.39.2

2 1

[PATCH OLK-6.6 v2] block: support to account io_ticks precisely
by Yu Kuai 06 Jan '24

06 Jan '24

Currently, io_ticks is accounted based on sampling, specifically update_io_ticks() will always account io_ticks by 1 jiffies from bdev_start_io_acct()/blk_account_io_start(), and the result can be inaccurate, for example(HZ is 250): Test script: fio -filename=/dev/sda -bs=4k -rw=write -direct=1 -name=test -thinktime=4ms Test result: util is about 90%, while the disk is really idle. In order to account io_ticks precisely, update_io_ticks() must know if there are IO inflight already, and this requires overhead slightly, hence precise io accounting is disabled by default, and user can enable it through sysfs entry. Noted that for rq-based devcie, part_stat_local_inc/dec() and part_in_flight() is used to track inflight instead of iterating tags, which is not supposed to be used in fast path because 'tags->lock' is grabbed in blk_mq_find_and_get_req(). Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> --- Documentation/ABI/stable/sysfs-block | 8 ++++-- block/blk-core.c | 27 ++++++++++++++++-- block/blk-merge.c | 3 ++ block/blk-mq-debugfs.c | 2 ++ block/blk-mq.c | 12 ++++++-- block/blk-sysfs.c | 42 ++++++++++++++++++++++++++-- block/blk.h | 1 + block/genhd.c | 2 +- include/linux/blk-mq.h | 1 + include/linux/blkdev.h | 3 ++ 10 files changed, 91 insertions(+), 10 deletions(-) diff --git a/Documentation/ABI/stable/sysfs-block b/Documentation/ABI/stable/sysfs-block index 1fe9a553c37b..e5fedecf7bdf 100644 --- a/Documentation/ABI/stable/sysfs-block +++ b/Documentation/ABI/stable/sysfs-block @@ -358,8 +358,12 @@ What: /sys/block/<disk>/queue/iostats Date: January 2009 Contact: linux-block(a)vger.kernel.org Description: - [RW] This file is used to control (on/off) the iostats - accounting of the disk. + [RW] This file is used to control the iostats accounting of the + disk. If this value is 0, iostats accounting is disabled; If + this value is 1, iostats accounting is enabled, but io_ticks is + accounted by sampling and the result is not accurate; If this + value is 2, iostats accounting is enabled and io_ticks is + accounted precisely, but there will be slightly overhead. What: /sys/block/<disk>/queue/logical_block_size diff --git a/block/blk-core.c b/block/blk-core.c index fdf25b8d6e78..13a27d1d8540 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -71,6 +71,21 @@ static struct kmem_cache *blk_requestq_cachep; */ static struct workqueue_struct *kblockd_workqueue; +static bool precise_iostat; + +static int __init precise_iostat_setup(char *str) +{ + bool precise; + + if (!strtobool(str, &precise)) { + precise_iostat = precise; + pr_info("precise iostat %d\n", precise_iostat); + } + + return 1; +} +__setup("precise_iostat=", precise_iostat_setup); + /** * blk_queue_flag_set - atomically set a queue flag * @flag: flag to be set @@ -441,6 +456,8 @@ struct request_queue *blk_alloc_queue(int node_id) blk_set_default_limits(&q->limits); q->nr_requests = BLKDEV_DEFAULT_RQ; + if (precise_iostat) + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); return q; @@ -938,11 +955,15 @@ EXPORT_SYMBOL_GPL(iocb_bio_iopoll); void update_io_ticks(struct block_device *part, unsigned long now, bool end) { unsigned long stamp; + bool precise = blk_queue_precise_io_stat(part->bd_queue); again: stamp = READ_ONCE(part->bd_stamp); - if (unlikely(time_after(now, stamp))) { - if (likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) - __part_stat_add(part, io_ticks, end ? now - stamp : 1); + if (unlikely(time_after(now, stamp)) && + likely(try_cmpxchg(&part->bd_stamp, &stamp, now))) { + if (end || (precise && part_in_flight(part))) + __part_stat_add(part, io_ticks, now - stamp); + else if (!precise) + __part_stat_add(part, io_ticks, 1); } if (part->bd_partno) { part = bdev_whole(part); diff --git a/block/blk-merge.c b/block/blk-merge.c index 65e75efa9bd3..5db8228c46fc 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -783,6 +783,9 @@ static void blk_account_io_merge_request(struct request *req) if (blk_do_io_stat(req)) { part_stat_lock(); part_stat_inc(req->part, merges[op_stat_group(req_op(req))]); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-mq-debugfs.c b/block/blk-mq-debugfs.c index aa7a1357c3e1..9ad108307344 100644 --- a/block/blk-mq-debugfs.c +++ b/block/blk-mq-debugfs.c @@ -86,6 +86,7 @@ static const char *const blk_queue_flag_name[] = { QUEUE_FLAG_NAME(FAIL_IO), QUEUE_FLAG_NAME(NONROT), QUEUE_FLAG_NAME(IO_STAT), + QUEUE_FLAG_NAME(PRECISE_IO_STAT), QUEUE_FLAG_NAME(NOXMERGES), QUEUE_FLAG_NAME(ADD_RANDOM), QUEUE_FLAG_NAME(SYNCHRONOUS), @@ -254,6 +255,7 @@ static const char *const rqf_name[] = { RQF_NAME(FAILED), RQF_NAME(QUIET), RQF_NAME(IO_STAT), + RQF_NAME(PRECISE_IO_STAT), RQF_NAME(PM), RQF_NAME(HASHED), RQF_NAME(STATS), diff --git a/block/blk-mq.c b/block/blk-mq.c index dd7c9e3eca1b..9c894e0d0b19 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -360,8 +360,11 @@ static struct request *blk_mq_rq_ctx_init(struct blk_mq_alloc_data *data, if (data->flags & BLK_MQ_REQ_PM) data->rq_flags |= RQF_PM; - if (blk_queue_io_stat(q)) + if (blk_queue_io_stat(q)) { data->rq_flags |= RQF_IO_STAT; + if (blk_queue_precise_io_stat(q)) + data->rq_flags |= RQF_PRECISE_IO_STAT; + } rq->rq_flags = data->rq_flags; if (data->rq_flags & RQF_SCHED_TAGS) { @@ -994,6 +997,9 @@ static inline void blk_account_io_done(struct request *req, u64 now) update_io_ticks(req->part, jiffies, true); part_stat_inc(req->part, ios[sgrp]); part_stat_add(req->part, nsecs[sgrp], now - req->start_time_ns); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_dec(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } @@ -1001,7 +1007,6 @@ static inline void blk_account_io_done(struct request *req, u64 now) static inline void blk_account_io_start(struct request *req) { trace_block_io_start(req); - if (blk_do_io_stat(req)) { /* * All non-passthrough requests are created from a bio with one @@ -1016,6 +1021,9 @@ static inline void blk_account_io_start(struct request *req) part_stat_lock(); update_io_ticks(req->part, jiffies, false); + if (req->rq_flags & RQF_PRECISE_IO_STAT) + part_stat_local_inc(req->part, + in_flight[op_is_write(req_op(req))]); part_stat_unlock(); } } diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 63e481262336..d498cf0942d3 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -303,7 +303,6 @@ queue_##name##_store(struct request_queue *q, const char *page, size_t count) \ QUEUE_SYSFS_BIT_FNS(nonrot, NONROT, 1); QUEUE_SYSFS_BIT_FNS(random, ADD_RANDOM, 0); -QUEUE_SYSFS_BIT_FNS(iostats, IO_STAT, 0); QUEUE_SYSFS_BIT_FNS(stable_writes, STABLE_WRITES, 0); #undef QUEUE_SYSFS_BIT_FNS @@ -473,6 +472,45 @@ static ssize_t queue_dax_show(struct request_queue *q, char *page) return queue_var_show(blk_queue_dax(q), page); } +static ssize_t queue_iostats_show(struct request_queue *q, char *page) +{ + int val = 0; + + if (blk_queue_io_stat(q)) + val = blk_queue_precise_io_stat(q) ? 2 : 1; + + return sprintf(page, "%u\n", val); +} + +static ssize_t +queue_iostats_store(struct request_queue *q, const char *page, size_t count) +{ + unsigned long nr; + int ret = queue_var_store(&nr, page, count); + + if (ret < 0) + return ret; + + switch (nr) { + case 0: + blk_queue_flag_clear(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 1: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_clear(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + case 2: + blk_queue_flag_set(QUEUE_FLAG_IO_STAT, q); + blk_queue_flag_set(QUEUE_FLAG_PRECISE_IO_STAT, q); + break; + default: + return -EINVAL; + } + + return count; +} + #define QUEUE_RO_ENTRY(_prefix, _name) \ static struct queue_sysfs_entry _prefix##_entry = { \ .attr = { .name = _name, .mode = 0444 }, \ @@ -494,6 +532,7 @@ QUEUE_RO_ENTRY(queue_max_segments, "max_segments"); QUEUE_RO_ENTRY(queue_max_integrity_segments, "max_integrity_segments"); QUEUE_RO_ENTRY(queue_max_segment_size, "max_segment_size"); QUEUE_RW_ENTRY(elv_iosched, "scheduler"); +QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RO_ENTRY(queue_logical_block_size, "logical_block_size"); QUEUE_RO_ENTRY(queue_physical_block_size, "physical_block_size"); @@ -539,7 +578,6 @@ static struct queue_sysfs_entry queue_hw_sector_size_entry = { }; QUEUE_RW_ENTRY(queue_nonrot, "rotational"); -QUEUE_RW_ENTRY(queue_iostats, "iostats"); QUEUE_RW_ENTRY(queue_random, "add_random"); QUEUE_RW_ENTRY(queue_stable_writes, "stable_writes"); diff --git a/block/blk.h b/block/blk.h index 08a358bc0919..67915b04b3c1 100644 --- a/block/blk.h +++ b/block/blk.h @@ -344,6 +344,7 @@ static inline bool blk_do_io_stat(struct request *rq) } void update_io_ticks(struct block_device *part, unsigned long now, bool end); +unsigned int part_in_flight(struct block_device *part); static inline void req_set_nomerge(struct request_queue *q, struct request *req) { diff --git a/block/genhd.c b/block/genhd.c index 4a16a424f57d..b3ff653f3e50 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -118,7 +118,7 @@ static void part_stat_read_all(struct block_device *part, } } -static unsigned int part_in_flight(struct block_device *part) +unsigned int part_in_flight(struct block_device *part) { unsigned int inflight = 0; int cpu; diff --git a/include/linux/blk-mq.h b/include/linux/blk-mq.h index 3d74f3e5b995..9dfee0644f9c 100644 --- a/include/linux/blk-mq.h +++ b/include/linux/blk-mq.h @@ -46,6 +46,7 @@ typedef __u32 __bitwise req_flags_t; #define RQF_QUIET ((__force req_flags_t)(1 << 11)) /* account into disk and partition IO statistics */ #define RQF_IO_STAT ((__force req_flags_t)(1 << 13)) +#define RQF_PRECISE_IO_STAT ((__force req_flags_t)(1 << 14)) /* runtime pm request */ #define RQF_PM ((__force req_flags_t)(1 << 15)) /* on IO scheduler merge hash */ diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 9f3bcbcb156d..bea0b5fdac74 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -536,6 +536,7 @@ struct request_queue { #define QUEUE_FLAG_NONROT 6 /* non-rotational device (SSD) */ #define QUEUE_FLAG_VIRT QUEUE_FLAG_NONROT /* paravirt device */ #define QUEUE_FLAG_IO_STAT 7 /* do disk/partitions IO accounting */ +#define QUEUE_FLAG_PRECISE_IO_STAT 8 /* do disk/partitions IO accounting precisely */ #define QUEUE_FLAG_NOXMERGES 9 /* No extended merges */ #define QUEUE_FLAG_ADD_RANDOM 10 /* Contributes to random pool */ #define QUEUE_FLAG_SYNCHRONOUS 11 /* always completes in submit context */ @@ -576,6 +577,8 @@ bool blk_queue_flag_test_and_set(unsigned int flag, struct request_queue *q); #define blk_queue_stable_writes(q) \ test_bit(QUEUE_FLAG_STABLE_WRITES, &(q)->queue_flags) #define blk_queue_io_stat(q) test_bit(QUEUE_FLAG_IO_STAT, &(q)->queue_flags) +#define blk_queue_precise_io_stat(q) \ + test_bit(QUEUE_FLAG_PRECISE_IO_STAT, &(q)->queue_flags) #define blk_queue_add_random(q) test_bit(QUEUE_FLAG_ADD_RANDOM, &(q)->queue_flags) #define blk_queue_zone_resetall(q) \ test_bit(QUEUE_FLAG_ZONE_RESETALL, &(q)->queue_flags) -- 2.39.2

2 1

[PATCH OLK-6.6 0/2] support ext3/ext4 netlink error report.
by Baokun Li 06 Jan '24

06 Jan '24

Zhao Minmin (1): ext4: report error to userspace by netlink Zhihao Cheng (1): Add new config 'CONFIG_EXT4_ERROR_REPORT' to control ext3/4 error reporting arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/ext4/Kconfig | 8 +++ fs/ext4/ext4.h | 11 ++++ fs/ext4/super.c | 71 ++++++++++++++++++++++++++ include/uapi/linux/netlink.h | 1 + 6 files changed, 93 insertions(+) -- 2.31.1

2 3

[PATCH OLK-6.6 0/3] cgroup kabi
by Chen Ridong 05 Jan '24

05 Jan '24

Chen Ridong (3): cgroup: kabi: reserve space for cgroup frame namespace: kabi: reserve for future namespace development cgroup/psi: reserve kabi for future psi development include/linux/cgroup-defs.h | 32 ++++++++++++++++++++++++++++++++ include/linux/ipc_namespace.h | 6 ++++++ include/linux/nsproxy.h | 9 +++++++++ include/linux/pid_namespace.h | 2 ++ include/linux/psi_types.h | 16 ++++++++++++++++ include/linux/user_namespace.h | 33 +++++++++++++++++++++++++++++++++ kernel/ucount.c | 18 ++++++++++++++++++ 7 files changed, 116 insertions(+) -- 2.34.1

2 4

[PATCH OLK-6.6] arm64: cpufeature: add cmdline option for disable lse
by Wei Li 05 Jan '24

05 Jan '24

From: Xie XiuQi <xiexiuqi(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4JBSJ CVE: NA ---------------------------------------- LSE atomic instruction might introduce performance regression on specific benchmark or business. So add a cmdline option to disable/enable it. "lse=off" cmdline option means disable LSE atomic instruction. Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> [liwei: Fix compile warning with CONFIG_ARM64_LSE_ATOMICS=n] Signed-off-by: Wei Li <liwei391(a)huawei.com> --- arch/arm64/kernel/cpufeature.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 3517dd2b0358..6d12bbc54728 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -1431,6 +1431,22 @@ u64 __read_sysreg_by_encoding(u32 sys_id) #include <linux/irqchip/arm-gic-v3.h> +#ifdef CONFIG_ARM64_LSE_ATOMICS +static bool lse_disabled; + +static int __init parse_lse(char *str) +{ + if (str == NULL) + return 1; + + if (!strncmp(str, "off", 3)) + lse_disabled = true; + + return 0; +} +early_param("lse", parse_lse); +#endif + static bool has_always(const struct arm64_cpu_capabilities *entry, int scope) { @@ -1539,6 +1555,20 @@ static bool has_32bit_el0(const struct arm64_cpu_capabilities *entry, int scope) return true; } +#ifdef CONFIG_ARM64_LSE_ATOMICS +static bool has_cpuid_feature_lse(const struct arm64_cpu_capabilities *entry, + int scope) +{ + if (lse_disabled) { + pr_info_once("%s forced OFF by command line option\n", + entry->desc); + return false; + } + + return has_cpuid_feature(entry, scope); +} +#endif + static bool has_useable_gicv3_cpuif(const struct arm64_cpu_capabilities *entry, int scope) { bool has_sre; @@ -2316,7 +2346,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = { .desc = "LSE atomic instructions", .capability = ARM64_HAS_LSE_ATOMICS, .type = ARM64_CPUCAP_SYSTEM_FEATURE, - .matches = has_cpuid_feature, + .matches = has_cpuid_feature_lse, ARM64_CPUID_FIELDS(ID_AA64ISAR0_EL1, ATOMIC, IMP) }, #endif /* CONFIG_ARM64_LSE_ATOMICS */ -- 2.25.1

2 1

[PATCH OLK-6.6 0/4] JFFS2: Fix the race issues caused by the GC of jffs2
by ZhaoLong Wang 05 Jan '24

05 Jan '24

Hou Tao (4): jffs2: protect no-raw-node-ref check of inocache by erase_completion_lock jffs2: handle INO_STATE_CLEARING in jffs2_do_read_inode() jffs2: make the overwritten xattr invisible after remount jffs2: reset pino_nlink to 0 when inode creation failed fs/jffs2/dir.c | 28 ++++++++++++++++++---- fs/jffs2/nodelist.c | 7 ++++++ fs/jffs2/readinode.c | 11 ++++++++- fs/jffs2/xattr.c | 55 +++++++++++++++++++++++++++++++++++++++----- 4 files changed, 90 insertions(+), 11 deletions(-) -- 2.39.2

2 5

[PATCH OLK-6.6 0/4] JFFS2: Fix the race issues caused by the GC of jffs2
by ZhaoLong Wang 05 Jan '24

05 Jan '24

Hou Tao (4): jffs2: protect no-raw-node-ref check of inocache by erase_completion_lock jffs2: handle INO_STATE_CLEARING in jffs2_do_read_inode() jffs2: make the overwritten xattr invisible after remount jffs2: reset pino_nlink to 0 when inode creation failed fs/jffs2/dir.c | 28 ++++++++++++++++++---- fs/jffs2/nodelist.c | 7 ++++++ fs/jffs2/readinode.c | 11 ++++++++- fs/jffs2/xattr.c | 55 +++++++++++++++++++++++++++++++++++++++----- 4 files changed, 90 insertions(+), 11 deletions(-) -- 2.39.2

2 6

[PATCH OLK-6.6] kernel: add OPENEULER_VERSION_CODE to version.h
by Wei Li 05 Jan '24

05 Jan '24

From: Xie XiuQi <xiexiuqi(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7LEXY --------------------------------------------- Add OPENEULER_VERSION_CODE to version.h, so modules or applications can identify the specific kernel version. In most cases, the out-of-tree module needs to identify the release version of the openEuler for interface adaptation. The existing OPENEULER_VERSION() and OPENEULER_VERSION_CODE() cannot distinguish between LTS versions and innovative versions. Therefore, a new macro OPENEULER_LTS is introduced. The version information is generated in "linux/version.h", as bellow: include/generated/uapi/linux/version.h ``` #define OPENEULER_LTS 0 // 1: LTS; 0: none LTS #define OPENEULER_MAJOR 9999 // OS Major version, 9999: none released #define OPENEULER_MINOR 0 // SP release version #define OPENEULER_VERSION(a,b) (((a) << 8) + (b)) #define OPENEULER_VERSION_CODE 2559744 ``` Use Makefile.oever to avoid future merge conflicts. Link:https://gitee.com/openeuler/kernel/issues/I575IT Link:https://gitee.com/openeuler/kernel/issues/I7761D Link:https://gitee.com/openeuler/kernel/pulls/1442 Link:https://gitee.com/openeuler/kernel/pulls/1219 Link:https://gitee.com/openeuler/kernel/pulls/195 Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Wei Li <liwei391(a)huawei.com> --- Makefile | 11 ++++++++++- Makefile.oever | 4 ++++ 2 files changed, 14 insertions(+), 1 deletion(-) create mode 100644 Makefile.oever diff --git a/Makefile b/Makefile index 5c418efbe89b..e458c8265d75 100644 --- a/Makefile +++ b/Makefile @@ -1226,6 +1226,9 @@ uapi-asm-generic: # Generate some files # --------------------------------------------------------------------------- +# openEuler version variables +include $(srctree)/Makefile.oever + # KERNELRELEASE can change from a few different places, meaning version.h # needs to be updated, so this check is forced on all builds @@ -1250,7 +1253,13 @@ define filechk_version.h ((c) > 255 ? 255 : (c)))'; \ echo \#define LINUX_VERSION_MAJOR $(VERSION); \ echo \#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL); \ - echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL) + echo \#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL); \ + echo \#define OPENEULER_LTS $(OPENEULER_LTS); \ + echo \#define OPENEULER_MAJOR $(OPENEULER_MAJOR); \ + echo \#define OPENEULER_MINOR $(OPENEULER_MINOR); \ + echo '#define OPENEULER_VERSION(a,b) (((a) << 8) + (b))'; \ + echo \#define OPENEULER_VERSION_CODE $(shell \ + expr $(OPENEULER_MAJOR) \* 256 + $(OPENEULER_MINOR)) endef $(version_h): PATCHLEVEL := $(or $(PATCHLEVEL), 0) diff --git a/Makefile.oever b/Makefile.oever new file mode 100644 index 000000000000..96beccf3569c --- /dev/null +++ b/Makefile.oever @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 +OPENEULER_LTS = 0 +OPENEULER_MAJOR = 9999 +OPENEULER_MINOR = 0 -- 2.25.1

2 1

[PATCH OLK-6.6 00/10] Backport etmem feature to OLK 6.6
by Yuchen Tang 05 Jan '24

05 Jan '24

v1 -> v2 - make independent patches to export symbols we need - make independent patches for etmem scan and swap config - fix indentation and code style problems Yuchen Tang (10): etmem: a tiered memory manager etmem: etmem scan, the page hotness tracker mm: Export symbol __pud_trans_huge_lock mm: Export symbol walk_page_range etmem: add etmem scan feature to openEuler mm: Export symbol reclaim_pages etmem: add etmem swap feature to openEuler etmem: add original kernel swap enabled options etmem: add swapcache reclaim to etmem etmem: enable etmem configurations arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + fs/proc/Makefile | 3 + fs/proc/base.c | 8 + fs/proc/etmem_proc.c | 216 ++++ fs/proc/etmem_scan.c | 1383 ++++++++++++++++++++++++ fs/proc/etmem_scan.h | 149 +++ fs/proc/etmem_swap.c | 283 +++++ fs/proc/internal.h | 4 + include/linux/etmem.h | 75 ++ include/linux/mm.h | 4 + include/linux/mm_types.h | 5 + include/linux/swap.h | 1 + include/uapi/asm-generic/mman-common.h | 4 + mm/Kconfig | 33 + mm/Makefile | 1 + mm/etmem.c | 384 +++++++ mm/huge_memory.c | 1 + mm/internal.h | 1 - mm/madvise.c | 16 + mm/pagewalk.c | 1 + mm/swap_state.c | 4 + mm/vmscan.c | 16 + virt/kvm/kvm_main.c | 8 + 24 files changed, 2605 insertions(+), 1 deletion(-) create mode 100644 fs/proc/etmem_proc.c create mode 100644 fs/proc/etmem_scan.c create mode 100644 fs/proc/etmem_scan.h create mode 100644 fs/proc/etmem_swap.c create mode 100644 include/linux/etmem.h create mode 100644 mm/etmem.c -- 2.33.0

2 11

[PATCH OLK-6.6 v6 0/2] optimize inlining
by Yuntao Liu 05 Jan '24

05 Jan '24

Guo Xuenan (2): Revert "compiler: remove CONFIG_OPTIMIZE_INLINING entirely" make OPTIMIZE_INLINING config editable arch/arm64/kvm/sys_regs.h | 7 +++++- arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + .../net/ethernet/mellanox/mlx5/core/health.c | 24 +++++++++++++++++++ .../ethernet/mellanox/mlx5/core/mlx5_core.h | 24 ------------------- .../pci/hive_isp_css_include/print_support.h | 4 ++++ include/linux/compiler_types.h | 8 +++++++ include/trace/trace_events.h | 2 +- kernel/configs/tiny.config | 1 + lib/Kconfig.debug | 13 ++++++++++ 10 files changed, 59 insertions(+), 26 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 v3 0/8] introduce smart_grid zone
by Yipeng Zou 05 Jan '24

05 Jan '24

The patch sets include two parts: 1. patch 1~3: Rebase smart_grid from OLK-5.10 to OLK-6.6 2. patch 4~7: introduce smart_grid zone qos and cpufreq Since V2: 1. move new sysctl form sysctl.c to fair.c 2. add smart_grid cmdline Since V1: 1. Don't init smart_grid cpufreq with dynamic_affinity disable. 2. Forbid smart_grid cgroup interface with dynamic_affinity disable. Hui Tang (1): sched: Introduce smart grid scheduling strategy for cfs Wang ShaoBo (2): sched: smart grid: init sched_grid_qos structure on QOS purpose config: enable CONFIG_QOS_SCHED_SMART_GRID by default Yipeng Zou (5): sched: introduce smart grid qos zone smart_grid: introduce /proc/pid/smart_grid_level smart_grid: introduce smart_grid_strategy_ctrl sysctl smart_grid: cpufreq: introduce smart_grid cpufreq control smart_grid: introduce smart_grid cmdline arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/cpufreq/cpufreq.c | 244 +++++++++++ fs/proc/array.c | 16 + fs/proc/base.c | 84 ++++ include/linux/cpufreq.h | 11 + include/linux/sched.h | 31 ++ include/linux/sched/grid_qos.h | 135 +++++++ init/Kconfig | 13 + kernel/fork.c | 14 + kernel/sched/Makefile | 1 + kernel/sched/core.c | 181 +++++++++ kernel/sched/fair.c | 538 ++++++++++++++++++++++++- kernel/sched/grid/Makefile | 2 + kernel/sched/grid/internal.h | 6 + kernel/sched/grid/power.c | 27 ++ kernel/sched/grid/qos.c | 279 +++++++++++++ kernel/sched/grid/stat.c | 47 +++ kernel/sched/sched.h | 48 ++- mm/mempolicy.c | 11 +- 20 files changed, 1679 insertions(+), 11 deletions(-) create mode 100644 include/linux/sched/grid_qos.h create mode 100644 kernel/sched/grid/Makefile create mode 100644 kernel/sched/grid/internal.h create mode 100644 kernel/sched/grid/power.c create mode 100644 kernel/sched/grid/qos.c create mode 100644 kernel/sched/grid/stat.c -- 2.34.1

2 9

[openEuler-23.09] livepatch/core: Fix miss disable ro for MOD_RO_AFTER_INIT memory
by Zheng Yejian 05 Jan '24

05 Jan '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8HNHM -------------------------------- It was missed to set MOD_RO_AFTER_INIT type memory to be writable when porting e1e064674b6b ("livepatch/core: Revert module_enable_ro and module_disable_ro"). Thanks the report from laokz in https://gitee.com/laokz/klpmake/issues/I8HFMR. Fixes: e1e064674b6b ("livepatch/core: Revert module_enable_ro and module_disable_ro") Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- kernel/module/strict_rwx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/module/strict_rwx.c b/kernel/module/strict_rwx.c index 397e18f50517..575bf99c723a 100644 --- a/kernel/module/strict_rwx.c +++ b/kernel/module/strict_rwx.c @@ -46,6 +46,7 @@ void module_disable_ro(const struct module *mod) module_set_memory(mod, MOD_INIT_TEXT, set_memory_rw); module_set_memory(mod, MOD_RODATA, set_memory_rw); module_set_memory(mod, MOD_INIT_RODATA, set_memory_rw); + module_set_memory(mod, MOD_RO_AFTER_INIT, set_memory_rw); } #endif /* CONFIG_LIVEPATCH_WO_FTRACE */ -- 2.25.1

1 0

[PATCH OLK-6.6 v5 0/2] optimize inlining
by Yuntao Liu 05 Jan '24

05 Jan '24

*** BLURB HERE *** Guo Xuenan (2): Revert "compiler: remove CONFIG_OPTIMIZE_INLINING entirely" make OPTIMIZE_INLINING config editable arch/arm64/kvm/sys_regs.h | 7 +++++- arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + .../net/ethernet/mellanox/mlx5/core/health.c | 24 +++++++++++++++++++ .../ethernet/mellanox/mlx5/core/mlx5_core.h | 24 ------------------- .../pci/hive_isp_css_include/print_support.h | 4 ++++ include/linux/compiler_types.h | 8 +++++++ include/trace/trace_events.h | 2 +- kernel/configs/tiny.config | 1 + lib/Kconfig.debug | 13 ++++++++++ 10 files changed, 59 insertions(+), 26 deletions(-) -- 2.34.1

2 3

[PATCH V3 OLK-6.6 00/12] Backport vDPA migration support patches
by Jiang Dongxu 05 Jan '24

05 Jan '24

From: jiangdongxu <jiangdongxu1(a)huawei.com> Backport vDPA migration support patches merged on branch OLK-5.10 V3: fix compile error of kernel-6.6 new vdpa driver pds_vdpa V2: fix compile error of kernel-6.6 new vdpa driver vduse and snet_vdpa jiangdongxu (12): vdpa: add log operations vhost-vdpa: add uAPI for logging vdpa: add device state operations vhost-vdpa: add uAPI for device buffer vdpa: add vdpa device migration status ops vhost-vdpa: add uAPI for device migration status vhost: add VHOST feature VHOST_BACKEND_F_BYTEMAPLOG vhost-vdpa: Allow transparent MSI IOV vhost-vdpa: fix msi irq request err vhost-vdpa: allow set feature VHOST_F_LOG_ALL when been negotiated. vhost-vdpa: add reset state params to indicate reset level vdpa: add vmstate header file drivers/vdpa/ifcvf/ifcvf_main.c | 2 +- drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +- drivers/vdpa/pds/vdpa_dev.c | 2 +- drivers/vdpa/solidrun/snet_main.c | 2 +- drivers/vdpa/vdpa_sim/vdpa_sim.c | 2 +- drivers/vdpa/vdpa_user/vduse_dev.c | 2 +- drivers/vdpa/virtio_pci/vp_vdpa.c | 2 +- drivers/vhost/vdpa.c | 232 ++++++++++++++++++++++++++--- drivers/virtio/virtio_vdpa.c | 2 +- include/linux/vdpa.h | 56 ++++++- include/linux/vdpa_vmstate.h | 182 ++++++++++++++++++++++ include/uapi/linux/vhost.h | 12 ++ include/uapi/linux/vhost_types.h | 19 +++ 13 files changed, 486 insertions(+), 31 deletions(-) create mode 100644 include/linux/vdpa_vmstate.h -- 2.27.0

2 13