- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS] NFSv4: release seqid when open failed for nfs4.0
by Li Lingfeng 01 Nov '24

01 Nov '24

From: Yang Erkun <yangerkun(a)huaweicloud.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IATZPG CVE: NA -------------------------------- Two threads that work with the same cred try to open different files concurrently, they will utilize the same nfs4_state_owner. And in order to sequential open request send to server, the second task will fall into RPC_TASK_QUEUED in nfs_wait_on_sequence since there is already one work doing the open operation. Furthermore, the second task will wait until the first task completes its work, call rpc_wake_up_queued_task in nfs_release_seqid to wake up the second task, allowing it to complete the remaining open operation. The preceding logic does not cause any problems under normal circumstances. However, when once we force an unmount using `umount -f`, the function nfs_umount_begin attempts to kill all tasks by calling rpc_signal_task. This help wake up the second task, but it sets the status to -ERESTARTSYS. This status prevents `nfs4_open_release` from calling `nfs4_opendata_to_nfs4_state`. Consequently, while the second task will be freed, the original tasks will still exist in sequence->list(see nfs_release_seqid). Latter, when the first thread calls nfs_release_seqid and attempts to wake up the second task, it will trigger the uaf. To resolve this issue, ensure rpc_task will remove it from sequence->list in nfs4_open_release when open failed, besides, we can only wakeup the next rpc_task, or use-after-free will happen too since privious rpc_task may be released too. ================================================================== BUG: KASAN: slab-use-after-free in rpc_wake_up_queued_task+0xbb/0xc0 Read of size 8 at addr ff11000007639930 by task bash/792 CPU: 0 UID: 0 PID: 792 Comm: bash Tainted: G B W 6.11.0-09960-gd10b58fe53dc-dirty #10 Tainted: [B]=BAD_PAGE, [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xa3/0x120 print_address_description.constprop.0+0x63/0x510 print_report+0xf5/0x360 kasan_report+0xd9/0x140 __asan_report_load8_noabort+0x24/0x40 rpc_wake_up_queued_task+0xbb/0xc0 nfs_release_seqid+0x1e1/0x2f0 nfs_free_seqid+0x1a/0x40 nfs4_opendata_free+0xc6/0x3e0 _nfs4_do_open.isra.0+0xbe3/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... Allocated by task 767: kasan_save_stack+0x3b/0x70 kasan_save_track+0x1c/0x40 kasan_save_alloc_info+0x44/0x70 __kasan_slab_alloc+0xaf/0xc0 kmem_cache_alloc_noprof+0x1e0/0x4f0 rpc_new_task+0xe7/0x220 rpc_run_task+0x27/0x7d0 nfs4_run_open_task+0x477/0x810 _nfs4_proc_open+0xc0/0x6d0 _nfs4_open_and_get_state+0x178/0xc50 _nfs4_do_open.isra.0+0x47f/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 767: kasan_save_stack+0x3b/0x70 kasan_save_track+0x1c/0x40 kasan_save_free_info+0x43/0x80 __kasan_slab_free+0x4f/0x90 kmem_cache_free+0x199/0x4f0 mempool_free_slab+0x1f/0x30 mempool_free+0xdf/0x3d0 rpc_free_task+0x12d/0x180 rpc_final_put_task+0x10e/0x150 rpc_do_put_task+0x63/0x80 rpc_put_task+0x18/0x30 nfs4_run_open_task+0x4f4/0x810 _nfs4_proc_open+0xc0/0x6d0 _nfs4_open_and_get_state+0x178/0xc50 _nfs4_do_open.isra.0+0x47f/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 24ac23ab88df ("NFSv4: Convert open() into an asynchronous RPC call") Signed-off-by: Yang Erkun <yangerkun(a)huaweicloud.com> Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 2 ++ fs/nfs/nfs4state.c | 18 ++++++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index d22176d87448..586428cca20b 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -505,6 +505,7 @@ extern struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter, gfp_ extern int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task); extern void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid); extern void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid); +extern void nfs_release_seqid_inorder(struct nfs_seqid *seqid); extern void nfs_release_seqid(struct nfs_seqid *seqid); extern void nfs_free_seqid(struct nfs_seqid *seqid); extern int nfs4_setup_sequence(struct nfs_client *client, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ef9e80928f2a..b19a738dd2e1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2411,6 +2411,8 @@ static void nfs4_open_release(void *calldata) struct nfs4_opendata *data = calldata; struct nfs4_state *state = NULL; + if (data->rpc_status != 0 || !data->rpc_done) + nfs_release_seqid_inorder(data->o_arg.seqid); /* If this request hasn't been cancelled, do nothing */ if (!data->cancelled) goto out_free; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index c843917f8e2c..6a5479453256 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1103,6 +1103,24 @@ struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter, gfp_t gfp_m return new; } +void nfs_release_seqid_inorder(struct nfs_seqid *seqid) +{ + struct nfs_seqid_counter *sequence; + + if (seqid == NULL || list_empty(&seqid->list)) + return; + sequence = seqid->sequence; + spin_lock(&sequence->lock); + if (!list_is_last(&seqid->list, &sequence->list)) { + struct nfs_seqid *next; + + next = list_next_entry(seqid, list); + rpc_wake_up_queued_task(&sequence->wait, next->task); + } + list_del_init(&seqid->list); + spin_unlock(&sequence->lock); +} + void nfs_release_seqid(struct nfs_seqid *seqid) { struct nfs_seqid_counter *sequence; -- 2.31.1

2 1

[PATCH openEuler-1.0-LTS] nfs: maintain nfs_server in the reclaim process
by Li Lingfeng 01 Nov '24

01 Nov '24

From: Yang Erkun <yangerkun(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAUJJ4 CVE: NA -------------------------------- In the reclaim process, there may be a situation where all files are closed and the file system is unmounted, which will result in the release of nfs_server. This will trigger UAF in nfs4_put_open_state when the count of nfs4_state is decremented to zero, because the freed nfs_server will be accessed when evicting inode. Maintaining the nfs_server throughout the entire reclaim process by adding nfs_sb_active and nfs_sb_deactive to fix it. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Erkun <yangerkun(a)huawei.com> Conflicts: fs/nfs/nfs4state.c [Commit e09b21df3b60("[Huawei] nfs: fix memory leak in error path of nfs4_do_reclaim") at hulk-5.10 add nfs4_free_state_owners in nfs4_do_reclaim to fix memory leak.] Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- fs/nfs/nfs4state.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index c843917f8e2c..d9265c2eeb17 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1875,6 +1875,12 @@ static int nfs4_do_reclaim(struct nfs_client *clp, const struct nfs4_state_recov continue; if (!atomic_inc_not_zero(&sp->so_count)) continue; + if (!(server->super && nfs_sb_active(server->super))) { + spin_unlock(&clp->cl_lock); + rcu_read_unlock(); + nfs4_put_state_owner(sp); + goto restart; + } spin_unlock(&clp->cl_lock); rcu_read_unlock(); @@ -1883,10 +1889,12 @@ static int nfs4_do_reclaim(struct nfs_client *clp, const struct nfs4_state_recov set_bit(ops->owner_flag_bit, &sp->so_flags); nfs4_put_state_owner(sp); status = nfs4_recovery_handle_error(clp, status); + nfs_sb_deactive(server->super); return (status != 0) ? status : -EAGAIN; } nfs4_put_state_owner(sp); + nfs_sb_deactive(server->super); goto restart; } spin_unlock(&clp->cl_lock); -- 2.31.1

2 1

[PATCH OLK-6.6] drm/loongson: use old version of ast driver for LoongArch platform
by Hongchen Zhang 01 Nov '24

01 Nov '24

From: gaojuxin <gaojuxin(a)loongson.cn> LoongArch inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/IB1G96 -------------------------------- The new ast driver has some problems on LoongArch platform, So use the ast driver base on commit d95dcfc4e3e7 ("drm/ast: Style cleanups in plane code") for LoongArch platform. Signed-off-by: Dongyan Qian <qiandongyan(a)loongson.cn> Signed-off-by: gaojuxin <gaojuxin(a)loongson.cn> Reviewed-by: Juxin Gao <gaojuxin(a)loongson.cn> Link: https://gitee.com/anolis/cloud-kernel/pulls/4045 --- MAINTAINERS | 1 + arch/loongarch/configs/loongson3_defconfig | 2 +- drivers/gpu/drm/loongson/Kconfig | 2 + drivers/gpu/drm/loongson/Makefile | 1 + drivers/gpu/drm/loongson/ast_old/Kconfig | 14 + drivers/gpu/drm/loongson/ast_old/Makefile | 8 + drivers/gpu/drm/loongson/ast_old/ast_dp.c | 299 +++ drivers/gpu/drm/loongson/ast_old/ast_dp501.c | 429 ++++ .../drm/loongson/ast_old/ast_dram_tables.h | 125 + drivers/gpu/drm/loongson/ast_old/ast_drv.c | 231 ++ drivers/gpu/drm/loongson/ast_old/ast_drv.h | 528 +++++ drivers/gpu/drm/loongson/ast_old/ast_i2c.c | 170 ++ drivers/gpu/drm/loongson/ast_old/ast_main.c | 486 ++++ drivers/gpu/drm/loongson/ast_old/ast_mm.c | 101 + drivers/gpu/drm/loongson/ast_old/ast_mode.c | 1881 +++++++++++++++ drivers/gpu/drm/loongson/ast_old/ast_post.c | 2090 +++++++++++++++++ drivers/gpu/drm/loongson/ast_old/ast_tables.h | 342 +++ 17 files changed, 6709 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/loongson/ast_old/Kconfig create mode 100644 drivers/gpu/drm/loongson/ast_old/Makefile create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_dp.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_dp501.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_dram_tables.h create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_drv.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_drv.h create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_i2c.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_main.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_mm.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_mode.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_post.c create mode 100644 drivers/gpu/drm/loongson/ast_old/ast_tables.h diff --git a/MAINTAINERS b/MAINTAINERS index ef129afd4436..0333e06b7719 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7009,6 +7009,7 @@ L: dri-devel(a)lists.freedesktop.org S: Supported T: git git://anongit.freedesktop.org/drm/drm-misc F: drivers/gpu/drm/loongson/ +F: drivers/gpu/drm/loongson/ast_old/ DRM DRIVERS FOR MEDIATEK M: Chun-Kuang Hu <chunkuang.hu(a)kernel.org> diff --git a/arch/loongarch/configs/loongson3_defconfig b/arch/loongarch/configs/loongson3_defconfig index 587587249c28..df71a21d8c41 100644 --- a/arch/loongarch/configs/loongson3_defconfig +++ b/arch/loongarch/configs/loongson3_defconfig @@ -1469,7 +1469,7 @@ CONFIG_DRM_AMDGPU_USERPTR=y CONFIG_DRM_NOUVEAU=m CONFIG_DRM_VKMS=m CONFIG_DRM_UDL=m -CONFIG_DRM_AST=y +CONFIG_DRM_AST_LOONGSON=y CONFIG_DRM_MGAG200=m CONFIG_DRM_QXL=m CONFIG_DRM_VIRTIO_GPU=m diff --git a/drivers/gpu/drm/loongson/Kconfig b/drivers/gpu/drm/loongson/Kconfig index df6946d505fa..a9c1526a1c86 100644 --- a/drivers/gpu/drm/loongson/Kconfig +++ b/drivers/gpu/drm/loongson/Kconfig @@ -15,3 +15,5 @@ config DRM_LOONGSON If "M" is selected, the module will be called loongson. If in doubt, say "N". + +source "drivers/gpu/drm/loongson/ast_old/Kconfig" diff --git a/drivers/gpu/drm/loongson/Makefile b/drivers/gpu/drm/loongson/Makefile index 91e72bd900c1..a7f05d3fa0ca 100644 --- a/drivers/gpu/drm/loongson/Makefile +++ b/drivers/gpu/drm/loongson/Makefile @@ -20,3 +20,4 @@ loongson-y += loongson_device.o \ loongson_module.o obj-$(CONFIG_DRM_LOONGSON) += loongson.o +obj-$(CONFIG_DRM_AST_LOONGSON) += ast_old/ diff --git a/drivers/gpu/drm/loongson/ast_old/Kconfig b/drivers/gpu/drm/loongson/ast_old/Kconfig new file mode 100644 index 000000000000..40af6934ac36 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +config DRM_AST_LOONGSON + tristate "AST server chips for Loongson Platform" + depends on DRM && PCI && MMU && LOONGARCH + select DRM_KMS_HELPER + select DRM_VRAM_HELPER + select DRM_TTM + select DRM_TTM_HELPER + help + Say yes for experimental AST GPU driver. Do not enable + this driver without having a working -modesetting, + and a version of AST that knows to fail if KMS + is bound to the driver. These GPUs are commonly found + in server chipsets. diff --git a/drivers/gpu/drm/loongson/ast_old/Makefile b/drivers/gpu/drm/loongson/ast_old/Makefile new file mode 100644 index 000000000000..02d40f992f5a --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/Makefile @@ -0,0 +1,8 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Makefile for the drm device driver. This driver provides support for the +# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher. + +ast-y := ast_drv.o ast_i2c.o ast_main.o ast_mm.o ast_mode.o ast_post.o ast_dp501.o ast_dp.o + +obj-$(CONFIG_DRM_AST_LOONGSON) := ast.o diff --git a/drivers/gpu/drm/loongson/ast_old/ast_dp.c b/drivers/gpu/drm/loongson/ast_old/ast_dp.c new file mode 100644 index 000000000000..b7e1f51d558b --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_dp.c @@ -0,0 +1,299 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2021, ASPEED Technology Inc. +// Authors: KuoHsiang Chou <kuohsiang_chou(a)aspeedtech.com> + +#include <linux/firmware.h> +#include <linux/delay.h> +#include <drm/drm_print.h> +#include "ast_drv.h" + +int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata) +{ + struct ast_private *ast = to_ast_private(dev); + u8 i = 0, j = 0; + + /* + * CRD1[b5]: DP MCU FW is executing + * CRDC[b0]: DP link success + * CRDF[b0]: DP HPD + * CRE5[b0]: Host reading EDID process is done + */ + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, + ASTDP_MCU_FW_EXECUTING) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, + ASTDP_LINK_SUCCESS) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + ASTDP_HOST_EDID_READ_DONE_MASK))) { + goto err_astdp_edid_not_ready; + } + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + (u8)~ASTDP_HOST_EDID_READ_DONE_MASK, 0x00); + + for (i = 0; i < 32; i++) { + /* + * CRE4[7:0]: Read-Pointer for EDID (Unit: 4bytes); valid range: 0~64 + */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE4, + ASTDP_AND_CLEAR_MASK, (u8)i); + j = 0; + + /* + * CRD7[b0]: valid flag for EDID + * CRD6[b0]: mirror read pointer for EDID + */ + while ((ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD7, + ASTDP_EDID_VALID_FLAG_MASK) != + 0x01) || + (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD6, + ASTDP_EDID_READ_POINTER_MASK) != + i)) { + /* + * Delay are getting longer with each retry. + * 1. The Delays are often 2 loops when users request "Display Settings" + * of right-click of mouse. + * 2. The Delays are often longer a lot when system resume from S3/S4. + */ + mdelay(j + 1); + + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, + 0xD1, + ASTDP_MCU_FW_EXECUTING) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, + 0xDC, + ASTDP_LINK_SUCCESS) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, + 0xDF, ASTDP_HPD))) { + goto err_astdp_jump_out_loop_of_edid; + } + + j++; + if (j > 200) + goto err_astdp_jump_out_loop_of_edid; + } + + *(ediddata) = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0xD8, ASTDP_EDID_READ_DATA_MASK); + *(ediddata + 1) = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0xD9, ASTDP_EDID_READ_DATA_MASK); + *(ediddata + 2) = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0xDA, ASTDP_EDID_READ_DATA_MASK); + *(ediddata + 3) = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0xDB, ASTDP_EDID_READ_DATA_MASK); + + if (i == 31) { + /* + * For 128-bytes EDID_1.3, + * 1. Add the value of Bytes-126 to Bytes-127. + * The Bytes-127 is Checksum. Sum of all 128bytes should + * equal 0 (mod 256). + * 2. Modify Bytes-126 to be 0. + * The Bytes-126 indicates the Number of extensions to + * follow. 0 represents noextensions. + */ + *(ediddata + 3) = *(ediddata + 3) + *(ediddata + 2); + *(ediddata + 2) = 0; + } + + ediddata += 4; + } + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + (u8)~ASTDP_HOST_EDID_READ_DONE_MASK, + ASTDP_HOST_EDID_READ_DONE); + + return 0; + +err_astdp_jump_out_loop_of_edid: + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + (u8)~ASTDP_HOST_EDID_READ_DONE_MASK, + ASTDP_HOST_EDID_READ_DONE); + return (~(j + 256) + 1); + +err_astdp_edid_not_ready: + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, + ASTDP_MCU_FW_EXECUTING))) + return (~0xD1 + 1); + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, + ASTDP_LINK_SUCCESS))) + return (~0xDC + 1); + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD))) + return (~0xDF + 1); + if (!(ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + ASTDP_HOST_EDID_READ_DONE_MASK))) + return (~0xE5 + 1); + + return 0; +} + +/* + * Launch Aspeed DP + */ +void ast_dp_launch(struct drm_device *dev, u8 bPower) +{ + u32 i = 0, j = 0, WaitCount = 1; + u8 bDPTX = 0; + u8 bDPExecute = 1; + + struct ast_private *ast = to_ast_private(dev); + // S3 come back, need more time to wait BMC ready. + if (bPower) + WaitCount = 300; + + // Wait total count by different condition. + for (j = 0; j < WaitCount; j++) { + bDPTX = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, + TX_TYPE_MASK); + + if (bDPTX) + break; + + msleep(100); + } + + // 0xE : ASTDP with DPMCU FW handling + if (bDPTX == ASTDP_DPMCU_TX) { + // Wait one second then timeout. + i = 0; + + while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xD1, + COPROCESSOR_LAUNCH) != + COPROCESSOR_LAUNCH) { + i++; + // wait 100 ms + msleep(100); + + if (i >= 10) { + // DP would not be ready. + bDPExecute = 0; + break; + } + } + + if (bDPExecute) + ast->tx_chip_types |= BIT(AST_TX_ASTDP); + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE5, + (u8)~ASTDP_HOST_EDID_READ_DONE_MASK, + ASTDP_HOST_EDID_READ_DONE); + } +} + +void ast_dp_power_on_off(struct drm_device *dev, bool on) +{ + struct ast_private *ast = to_ast_private(dev); + // Read and Turn off DP PHY sleep + u8 bE3 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, + AST_DP_VIDEO_ENABLE); + + // Turn on DP PHY sleep + if (!on) + bE3 |= AST_DP_PHY_SLEEP; + + // DP Power on/off + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, + (u8)~AST_DP_PHY_SLEEP, bE3); +} + +void ast_dp_set_on_off(struct drm_device *dev, bool on) +{ + struct ast_private *ast = to_ast_private(dev); + u8 video_on_off = on; + + // Video On/Off + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE3, + (u8)~AST_DP_VIDEO_ENABLE, on); + + // If DP plug in and link successful then check video on / off status + if (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDC, + ASTDP_LINK_SUCCESS) && + ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, ASTDP_HPD)) { + video_on_off <<= 4; + while (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xDF, + ASTDP_MIRROR_VIDEO_ENABLE) != + video_on_off) { + // wait 1 ms + mdelay(1); + } + } +} + +void ast_dp_set_mode(struct drm_crtc *crtc, + struct ast_vbios_mode_info *vbios_mode) +{ + struct ast_private *ast = to_ast_private(crtc->dev); + + u32 ulRefreshRateIndex; + u8 ModeIdx; + + ulRefreshRateIndex = vbios_mode->enh_table->refresh_rate_index - 1; + + switch (crtc->mode.crtc_hdisplay) { + case 320: + ModeIdx = ASTDP_320x240_60; + break; + case 400: + ModeIdx = ASTDP_400x300_60; + break; + case 512: + ModeIdx = ASTDP_512x384_60; + break; + case 640: + ModeIdx = (ASTDP_640x480_60 + (u8)ulRefreshRateIndex); + break; + case 800: + ModeIdx = (ASTDP_800x600_56 + (u8)ulRefreshRateIndex); + break; + case 1024: + ModeIdx = (ASTDP_1024x768_60 + (u8)ulRefreshRateIndex); + break; + case 1152: + ModeIdx = ASTDP_1152x864_75; + break; + case 1280: + if (crtc->mode.crtc_vdisplay == 800) + ModeIdx = + (ASTDP_1280x800_60_RB - (u8)ulRefreshRateIndex); + else // 1024 + ModeIdx = (ASTDP_1280x1024_60 + (u8)ulRefreshRateIndex); + break; + case 1360: + case 1366: + ModeIdx = ASTDP_1366x768_60; + break; + case 1440: + ModeIdx = (ASTDP_1440x900_60_RB - (u8)ulRefreshRateIndex); + break; + case 1600: + if (crtc->mode.crtc_vdisplay == 900) + ModeIdx = + (ASTDP_1600x900_60_RB - (u8)ulRefreshRateIndex); + else //1200 + ModeIdx = ASTDP_1600x1200_60; + break; + case 1680: + ModeIdx = (ASTDP_1680x1050_60_RB - (u8)ulRefreshRateIndex); + break; + case 1920: + if (crtc->mode.crtc_vdisplay == 1080) + ModeIdx = ASTDP_1920x1080_60; + else //1200 + ModeIdx = ASTDP_1920x1200_60; + break; + default: + return; + } + + /* + * CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp) + * CRE1[7:0]: MISC1 (default: 0x00) + * CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50) + */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE0, + ASTDP_AND_CLEAR_MASK, ASTDP_MISC0_24bpp); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE1, + ASTDP_AND_CLEAR_MASK, ASTDP_MISC1); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xE2, + ASTDP_AND_CLEAR_MASK, ModeIdx); +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_dp501.c b/drivers/gpu/drm/loongson/ast_old/ast_dp501.c new file mode 100644 index 000000000000..39474bff1aea --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_dp501.c @@ -0,0 +1,429 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/module.h> + +#include "ast_drv.h" + +MODULE_FIRMWARE("ast_dp501_fw.bin"); + +static void ast_release_firmware(void *data) +{ + struct ast_private *ast = data; + + release_firmware(ast->dp501_fw); + ast->dp501_fw = NULL; +} + +static int ast_load_dp501_microcode(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + int ret; + + ret = request_firmware(&ast->dp501_fw, "ast_dp501_fw.bin", dev->dev); + if (ret) + return ret; + + return devm_add_action_or_reset(dev->dev, ast_release_firmware, ast); +} + +static void send_ack(struct ast_private *ast) +{ + u8 sendack; + + sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff); + sendack |= 0x80; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack); +} + +static void send_nack(struct ast_private *ast) +{ + u8 sendack; + + sendack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0xff); + sendack &= ~0x80; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, 0x00, sendack); +} + +static bool wait_ack(struct ast_private *ast) +{ + u8 waitack; + u32 retry = 0; + + do { + waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, + 0xff); + waitack &= 0x80; + udelay(100); + } while ((!waitack) && (retry++ < 1000)); + + if (retry < 1000) + return true; + else + return false; +} + +static bool wait_nack(struct ast_private *ast) +{ + u8 waitack; + u32 retry = 0; + + do { + waitack = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd2, + 0xff); + waitack &= 0x80; + udelay(100); + } while ((waitack) && (retry++ < 1000)); + + if (retry < 1000) + return true; + else + return false; +} + +static void set_cmd_trigger(struct ast_private *ast) +{ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x40); +} + +static void clear_cmd_trigger(struct ast_private *ast) +{ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9b, ~0x40, 0x00); +} + +static bool ast_write_cmd(struct drm_device *dev, u8 data) +{ + struct ast_private *ast = to_ast_private(dev); + int retry = 0; + + if (wait_nack(ast)) { + send_nack(ast); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data); + send_ack(ast); + set_cmd_trigger(ast); + do { + if (wait_ack(ast)) { + clear_cmd_trigger(ast); + send_nack(ast); + return true; + } + } while (retry++ < 100); + } + clear_cmd_trigger(ast); + send_nack(ast); + return false; +} + +static bool ast_write_data(struct drm_device *dev, u8 data) +{ + struct ast_private *ast = to_ast_private(dev); + + if (wait_nack(ast)) { + send_nack(ast); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x9a, 0x00, data); + send_ack(ast); + if (wait_ack(ast)) { + send_nack(ast); + return true; + } + } + send_nack(ast); + return false; +} + +void ast_set_dp501_video_output(struct drm_device *dev, u8 mode) +{ + ast_write_cmd(dev, 0x40); + ast_write_data(dev, mode); + + /* + * msleep < 20ms can sleep for up to 20ms; + * see Documentation/timers/timers-howto.rst + */ + msleep(20); +} + +static u32 get_fw_base(struct ast_private *ast) +{ + return ast_mindwm(ast, 0x1e6e2104) & 0x7fffffff; +} + +bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size) +{ + struct ast_private *ast = to_ast_private(dev); + u32 i, data; + u32 boot_address; + + if (ast->config_mode != ast_use_p2a) + return false; + + data = ast_mindwm(ast, 0x1e6e2100) & 0x01; + if (data) { + boot_address = get_fw_base(ast); + for (i = 0; i < size; i += 4) + *(u32 *)(addr + i) = ast_mindwm(ast, boot_address + i); + return true; + } + return false; +} + +static bool ast_launch_m68k(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u32 i, data, len = 0; + u32 boot_address; + u8 *fw_addr = NULL; + u8 jreg; + + if (ast->config_mode != ast_use_p2a) + return false; + + data = ast_mindwm(ast, 0x1e6e2100) & 0x01; + if (!data) { + if (ast->dp501_fw_addr) { + fw_addr = ast->dp501_fw_addr; + len = 32 * 1024; + } else { + if (!ast->dp501_fw && ast_load_dp501_microcode(dev) < 0) + return false; + + fw_addr = (u8 *)ast->dp501_fw->data; + len = ast->dp501_fw->size; + } + /* Get BootAddress */ + ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8); + data = ast_mindwm(ast, 0x1e6e0004); + switch (data & 0x03) { + case 0: + boot_address = 0x44000000; + break; + default: + case 1: + boot_address = 0x48000000; + break; + case 2: + boot_address = 0x50000000; + break; + case 3: + boot_address = 0x60000000; + break; + } + boot_address -= 0x200000; /* -2MB */ + + /* copy image to buffer */ + for (i = 0; i < len; i += 4) { + data = *(u32 *)(fw_addr + i); + ast_moutdwm(ast, boot_address + i, data); + } + + /* Init SCU */ + ast_moutdwm(ast, 0x1e6e2000, 0x1688a8a8); + + /* Launch FW */ + ast_moutdwm(ast, 0x1e6e2104, 0x80000000 + boot_address); + ast_moutdwm(ast, 0x1e6e2100, 1); + + /* Update Scratch */ + data = ast_mindwm(ast, 0x1e6e2040) & + 0xfffff1ff; /* D[11:9] = 100b: UEFI handling */ + data |= 0x800; + ast_moutdwm(ast, 0x1e6e2040, data); + + jreg = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0x99, + 0xfc); /* D[1:0]: Reserved Video Buffer */ + jreg |= 0x02; + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x99, jreg); + } + return true; +} + +bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata) +{ + struct ast_private *ast = to_ast_private(dev); + u32 i, boot_address, offset, data; + u32 *pEDIDidx; + + if (ast->config_mode == ast_use_p2a) { + boot_address = get_fw_base(ast); + + /* validate FW version */ + offset = AST_DP501_GBL_VERSION; + data = ast_mindwm(ast, boot_address + offset); + if ((data & AST_DP501_FW_VERSION_MASK) != + AST_DP501_FW_VERSION_1) + return false; + + /* validate PnP Monitor */ + offset = AST_DP501_PNPMONITOR; + data = ast_mindwm(ast, boot_address + offset); + if (!(data & AST_DP501_PNP_CONNECTED)) + return false; + + /* Read EDID */ + offset = AST_DP501_EDID_DATA; + for (i = 0; i < 128; i += 4) { + data = ast_mindwm(ast, boot_address + offset + i); + pEDIDidx = (u32 *)(ediddata + i); + *pEDIDidx = data; + } + } else { + if (!ast->dp501_fw_buf) + return false; + + /* dummy read */ + offset = 0x0000; + data = readl(ast->dp501_fw_buf + offset); + + /* validate FW version */ + offset = AST_DP501_GBL_VERSION; + data = readl(ast->dp501_fw_buf + offset); + if ((data & AST_DP501_FW_VERSION_MASK) != + AST_DP501_FW_VERSION_1) + return false; + + /* validate PnP Monitor */ + offset = AST_DP501_PNPMONITOR; + data = readl(ast->dp501_fw_buf + offset); + if (!(data & AST_DP501_PNP_CONNECTED)) + return false; + + /* Read EDID */ + offset = AST_DP501_EDID_DATA; + for (i = 0; i < 128; i += 4) { + data = readl(ast->dp501_fw_buf + offset + i); + pEDIDidx = (u32 *)(ediddata + i); + *pEDIDidx = data; + } + } + + return true; +} + +static bool ast_init_dvo(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u8 jreg; + u32 data; + + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x12000, 0x1688a8a8); + + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + if (!(jreg & 0x80)) { + /* Init SCU DVO Settings */ + data = ast_read32(ast, 0x12008); + /* delay phase */ + data &= 0xfffff8ff; + data |= 0x00000500; + ast_write32(ast, 0x12008, data); + + if (ast->chip == AST2300) { + data = ast_read32(ast, 0x12084); + /* multi-pins for DVO single-edge */ + data |= 0xfffe0000; + ast_write32(ast, 0x12084, data); + + data = ast_read32(ast, 0x12088); + /* multi-pins for DVO single-edge */ + data |= 0x000fffff; + ast_write32(ast, 0x12088, data); + + data = ast_read32(ast, 0x12090); + /* multi-pins for DVO single-edge */ + data &= 0xffffffcf; + data |= 0x00000020; + ast_write32(ast, 0x12090, data); + } else { /* AST2400 */ + data = ast_read32(ast, 0x12088); + /* multi-pins for DVO single-edge */ + data |= 0x30000000; + ast_write32(ast, 0x12088, data); + + data = ast_read32(ast, 0x1208c); + /* multi-pins for DVO single-edge */ + data |= 0x000000cf; + ast_write32(ast, 0x1208c, data); + + data = ast_read32(ast, 0x120a4); + /* multi-pins for DVO single-edge */ + data |= 0xffff0000; + ast_write32(ast, 0x120a4, data); + + data = ast_read32(ast, 0x120a8); + /* multi-pins for DVO single-edge */ + data |= 0x0000000f; + ast_write32(ast, 0x120a8, data); + + data = ast_read32(ast, 0x12094); + /* multi-pins for DVO single-edge */ + data |= 0x00000002; + ast_write32(ast, 0x12094, data); + } + } + + /* Force to DVO */ + data = ast_read32(ast, 0x1202c); + data &= 0xfffbffff; + ast_write32(ast, 0x1202c, data); + + /* Init VGA DVO Settings */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x80); + return true; +} + +static void ast_init_analog(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u32 data; + + /* + * Set DAC source to VGA mode in SCU2C via the P2A + * bridge. First configure the P2U to target the SCU + * in case it isn't at this stage. + */ + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + + /* Then unlock the SCU with the magic password */ + ast_write32(ast, 0x12000, 0x1688a8a8); + ast_write32(ast, 0x12000, 0x1688a8a8); + ast_write32(ast, 0x12000, 0x1688a8a8); + + /* Finally, clear bits [17:16] of SCU2c */ + data = ast_read32(ast, 0x1202c); + data &= 0xfffcffff; + ast_write32(ast, 0, data); + + /* Disable DVO */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00); +} + +void ast_init_3rdtx(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u8 jreg; + + if (ast->chip == AST2300 || ast->chip == AST2400) { + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, + 0xff); + switch (jreg & 0x0e) { + case 0x04: + ast_init_dvo(dev); + break; + case 0x08: + ast_launch_m68k(dev); + break; + case 0x0c: + ast_init_dvo(dev); + break; + default: + if (ast->tx_chip_types & BIT(AST_TX_SIL164)) + ast_init_dvo(dev); + else + ast_init_analog(dev); + } + } +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_dram_tables.h b/drivers/gpu/drm/loongson/ast_old/ast_dram_tables.h new file mode 100644 index 000000000000..114b1de15c1e --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_dram_tables.h @@ -0,0 +1,125 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef AST_DRAM_TABLES_H +#define AST_DRAM_TABLES_H + +/* DRAM timing tables */ +struct ast_dramstruct { + u16 index; + u32 data; +}; + +static const struct ast_dramstruct ast2000_dram_table_data[] = { + { 0x0108, 0x00000000 }, { 0x0120, 0x00004a21 }, { 0xFF00, 0x00000043 }, + { 0x0000, 0xFFFFFFFF }, { 0x0004, 0x00000089 }, { 0x0008, 0x22331353 }, + { 0x000C, 0x0d07000b }, { 0x0010, 0x11113333 }, { 0x0020, 0x00110350 }, + { 0x0028, 0x1e0828f0 }, { 0x0024, 0x00000001 }, { 0x001C, 0x00000000 }, + { 0x0014, 0x00000003 }, { 0xFF00, 0x00000043 }, { 0x0018, 0x00000131 }, + { 0x0014, 0x00000001 }, { 0xFF00, 0x00000043 }, { 0x0018, 0x00000031 }, + { 0x0014, 0x00000001 }, { 0xFF00, 0x00000043 }, { 0x0028, 0x1e0828f1 }, + { 0x0024, 0x00000003 }, { 0x002C, 0x1f0f28fb }, { 0x0030, 0xFFFFFE01 }, + { 0xFFFF, 0xFFFFFFFF } +}; + +static const struct ast_dramstruct ast1100_dram_table_data[] = { + { 0x2000, 0x1688a8a8 }, { 0x2020, 0x000041f0 }, { 0xFF00, 0x00000043 }, + { 0x0000, 0xfc600309 }, { 0x006C, 0x00909090 }, { 0x0064, 0x00050000 }, + { 0x0004, 0x00000585 }, { 0x0008, 0x0011030f }, { 0x0010, 0x22201724 }, + { 0x0018, 0x1e29011a }, { 0x0020, 0x00c82222 }, { 0x0014, 0x01001523 }, + { 0x001C, 0x1024010d }, { 0x0024, 0x00cb2522 }, { 0x0038, 0xffffff82 }, + { 0x003C, 0x00000000 }, { 0x0040, 0x00000000 }, { 0x0044, 0x00000000 }, + { 0x0048, 0x00000000 }, { 0x004C, 0x00000000 }, { 0x0050, 0x00000000 }, + { 0x0054, 0x00000000 }, { 0x0058, 0x00000000 }, { 0x005C, 0x00000000 }, + { 0x0060, 0x032aa02a }, { 0x0064, 0x002d3000 }, { 0x0068, 0x00000000 }, + { 0x0070, 0x00000000 }, { 0x0074, 0x00000000 }, { 0x0078, 0x00000000 }, + { 0x007C, 0x00000000 }, { 0x0034, 0x00000001 }, { 0xFF00, 0x00000043 }, + { 0x002C, 0x00000732 }, { 0x0030, 0x00000040 }, { 0x0028, 0x00000005 }, + { 0x0028, 0x00000007 }, { 0x0028, 0x00000003 }, { 0x0028, 0x00000001 }, + { 0x000C, 0x00005a08 }, { 0x002C, 0x00000632 }, { 0x0028, 0x00000001 }, + { 0x0030, 0x000003c0 }, { 0x0028, 0x00000003 }, { 0x0030, 0x00000040 }, + { 0x0028, 0x00000003 }, { 0x000C, 0x00005a21 }, { 0x0034, 0x00007c03 }, + { 0x0120, 0x00004c41 }, { 0xffff, 0xffffffff }, +}; + +static const struct ast_dramstruct ast2100_dram_table_data[] = { + { 0x2000, 0x1688a8a8 }, { 0x2020, 0x00004120 }, { 0xFF00, 0x00000043 }, + { 0x0000, 0xfc600309 }, { 0x006C, 0x00909090 }, { 0x0064, 0x00070000 }, + { 0x0004, 0x00000489 }, { 0x0008, 0x0011030f }, { 0x0010, 0x32302926 }, + { 0x0018, 0x274c0122 }, { 0x0020, 0x00ce2222 }, { 0x0014, 0x01001523 }, + { 0x001C, 0x1024010d }, { 0x0024, 0x00cb2522 }, { 0x0038, 0xffffff82 }, + { 0x003C, 0x00000000 }, { 0x0040, 0x00000000 }, { 0x0044, 0x00000000 }, + { 0x0048, 0x00000000 }, { 0x004C, 0x00000000 }, { 0x0050, 0x00000000 }, + { 0x0054, 0x00000000 }, { 0x0058, 0x00000000 }, { 0x005C, 0x00000000 }, + { 0x0060, 0x0f2aa02a }, { 0x0064, 0x003f3005 }, { 0x0068, 0x02020202 }, + { 0x0070, 0x00000000 }, { 0x0074, 0x00000000 }, { 0x0078, 0x00000000 }, + { 0x007C, 0x00000000 }, { 0x0034, 0x00000001 }, { 0xFF00, 0x00000043 }, + { 0x002C, 0x00000942 }, { 0x0030, 0x00000040 }, { 0x0028, 0x00000005 }, + { 0x0028, 0x00000007 }, { 0x0028, 0x00000003 }, { 0x0028, 0x00000001 }, + { 0x000C, 0x00005a08 }, { 0x002C, 0x00000842 }, { 0x0028, 0x00000001 }, + { 0x0030, 0x000003c0 }, { 0x0028, 0x00000003 }, { 0x0030, 0x00000040 }, + { 0x0028, 0x00000003 }, { 0x000C, 0x00005a21 }, { 0x0034, 0x00007c03 }, + { 0x0120, 0x00005061 }, { 0xffff, 0xffffffff }, +}; + +/* + * AST2500 DRAM settings modules + */ +#define REGTBL_NUM 17 +#define REGIDX_010 0 +#define REGIDX_014 1 +#define REGIDX_018 2 +#define REGIDX_020 3 +#define REGIDX_024 4 +#define REGIDX_02C 5 +#define REGIDX_030 6 +#define REGIDX_214 7 +#define REGIDX_2E0 8 +#define REGIDX_2E4 9 +#define REGIDX_2E8 10 +#define REGIDX_2EC 11 +#define REGIDX_2F0 12 +#define REGIDX_2F4 13 +#define REGIDX_2F8 14 +#define REGIDX_RFC 15 +#define REGIDX_PLL 16 + +static const u32 ast2500_ddr3_1600_timing_table[REGTBL_NUM] = { + 0x64604D38, /* 0x010 */ + 0x29690599, /* 0x014 */ + 0x00000300, /* 0x018 */ + 0x00000000, /* 0x020 */ + 0x00000000, /* 0x024 */ + 0x02181E70, /* 0x02C */ + 0x00000040, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x02001300, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001B, /* 0x2E8 */ + 0x35B8C105, /* 0x2EC */ + 0x08090408, /* 0x2F0 */ + 0x9B000800, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x9971452F, /* tRFC */ + 0x000071C1 /* PLL */ +}; + +static const u32 ast2500_ddr4_1600_timing_table[REGTBL_NUM] = { + 0x63604E37, /* 0x010 */ + 0xE97AFA99, /* 0x014 */ + 0x00019000, /* 0x018 */ + 0x08000000, /* 0x020 */ + 0x00000400, /* 0x024 */ + 0x00000410, /* 0x02C */ + 0x00000101, /* 0x030 */ + 0x00000024, /* 0x214 */ + 0x03002900, /* 0x2E0 */ + 0x0E0000A0, /* 0x2E4 */ + 0x000E001C, /* 0x2E8 */ + 0x35B8C106, /* 0x2EC */ + 0x08080607, /* 0x2F0 */ + 0x9B000900, /* 0x2F4 */ + 0x0E400A00, /* 0x2F8 */ + 0x99714545, /* tRFC */ + 0x000071C1 /* PLL */ +}; + +#endif diff --git a/drivers/gpu/drm/loongson/ast_old/ast_drv.c b/drivers/gpu/drm/loongson/ast_old/ast_drv.c new file mode 100644 index 000000000000..2e069fe97939 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_drv.c @@ -0,0 +1,231 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ + +#include <linux/module.h> +#include <linux/pci.h> + +#include <drm/drm_aperture.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_module.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_fbdev_generic.h> +#include "ast_drv.h" + +static int ast_modeset = -1; + +MODULE_PARM_DESC(modeset, "Disable/Enable modesetting"); +module_param_named(modeset, ast_modeset, int, 0400); + +/* + * DRM driver + */ + +DEFINE_DRM_GEM_FOPS(ast_fops); + +static const struct drm_driver ast_driver = { .driver_features = DRIVER_ATOMIC | + DRIVER_GEM | + DRIVER_MODESET, + + .fops = &ast_fops, + .name = DRIVER_NAME, + .desc = DRIVER_DESC, + .date = DRIVER_DATE, + .major = DRIVER_MAJOR, + .minor = DRIVER_MINOR, + .patchlevel = DRIVER_PATCHLEVEL, + + DRM_GEM_VRAM_DRIVER }; + +/* + * PCI driver + */ + +#define PCI_VENDOR_ASPEED 0x1a03 + +#define AST_VGA_DEVICE(id, info) \ + { .class = PCI_BASE_CLASS_DISPLAY << 16, \ + .class_mask = 0xff0000, \ + .vendor = PCI_VENDOR_ASPEED, \ + .device = id, \ + .subvendor = PCI_ANY_ID, \ + .subdevice = PCI_ANY_ID, \ + .driver_data = (unsigned long)info } + +static const struct pci_device_id ast_pciidlist[] = { + AST_VGA_DEVICE(PCI_CHIP_AST2000, NULL), + AST_VGA_DEVICE(PCI_CHIP_AST2100, NULL), + { 0, 0, 0 }, +}; + +MODULE_DEVICE_TABLE(pci, ast_pciidlist); + +static int ast_remove_conflicting_framebuffers(struct pci_dev *pdev) +{ + resource_size_t base, size; + + base = pci_resource_start(pdev, 0); + size = pci_resource_len(pdev, 0); + + return drm_aperture_remove_conflicting_framebuffers(base, size, + &ast_driver); +} + +static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct ast_private *ast; + struct drm_device *dev; + int ret; + + ret = ast_remove_conflicting_framebuffers(pdev); + if (ret) + return ret; + + ret = pcim_enable_device(pdev); + if (ret) + return ret; + + ast = ast_device_create(&ast_driver, pdev, ent->driver_data); + if (IS_ERR(ast)) + return PTR_ERR(ast); + dev = &ast->base; + + ret = drm_dev_register(dev, ent->driver_data); + if (ret) + return ret; + + drm_fbdev_generic_setup(dev, 32); + + return 0; +} + +static void ast_pci_remove(struct pci_dev *pdev) +{ + struct drm_device *dev = pci_get_drvdata(pdev); + + drm_dev_unregister(dev); + drm_atomic_helper_shutdown(dev); +} + +static int ast_drm_freeze(struct drm_device *dev) +{ + int error; + + error = drm_mode_config_helper_suspend(dev); + if (error) + return error; + pci_save_state(to_pci_dev(dev->dev)); + return 0; +} + +static int ast_drm_thaw(struct drm_device *dev) +{ + ast_post_gpu(dev); + + return drm_mode_config_helper_resume(dev); +} + +static int ast_drm_resume(struct drm_device *dev) +{ + if (pci_enable_device(to_pci_dev(dev->dev))) + return -EIO; + + return ast_drm_thaw(dev); +} + +static int ast_pm_suspend(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *ddev = pci_get_drvdata(pdev); + int error; + + error = ast_drm_freeze(ddev); + if (error) + return error; + + pci_disable_device(pdev); + pci_set_power_state(pdev, PCI_D3hot); + return 0; +} + +static int ast_pm_resume(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *ddev = pci_get_drvdata(pdev); + + return ast_drm_resume(ddev); +} + +static int ast_pm_freeze(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *ddev = pci_get_drvdata(pdev); + + return ast_drm_freeze(ddev); +} + +static int ast_pm_thaw(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *ddev = pci_get_drvdata(pdev); + + return ast_drm_thaw(ddev); +} + +static int ast_pm_poweroff(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + struct drm_device *ddev = pci_get_drvdata(pdev); + + return ast_drm_freeze(ddev); +} + +static const struct dev_pm_ops ast_pm_ops = { + .suspend = ast_pm_suspend, + .resume = ast_pm_resume, + .freeze = ast_pm_freeze, + .thaw = ast_pm_thaw, + .poweroff = ast_pm_poweroff, + .restore = ast_pm_resume, +}; + +static struct pci_driver ast_pci_driver = { + .name = DRIVER_NAME, + .id_table = ast_pciidlist, + .probe = ast_pci_probe, + .remove = ast_pci_remove, + .driver.pm = &ast_pm_ops, +}; + +drm_module_pci_driver_if_modeset(ast_pci_driver, ast_modeset); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL and additional rights"); diff --git a/drivers/gpu/drm/loongson/ast_old/ast_drv.h b/drivers/gpu/drm/loongson/ast_old/ast_drv.h new file mode 100644 index 000000000000..29a2965080ef --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_drv.h @@ -0,0 +1,528 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ +#ifndef __AST_DRV_H__ +#define __AST_DRV_H__ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/io.h> +#include <linux/types.h> + +#include <drm/drm_connector.h> +#include <drm/drm_crtc.h> +#include <drm/drm_encoder.h> +#include <drm/drm_mode.h> +#include <drm/drm_framebuffer.h> +#include <drm/drm_fb_helper.h> + +#define DRIVER_AUTHOR "Dave Airlie" + +#define DRIVER_NAME "ast" +#define DRIVER_DESC "AST" +#define DRIVER_DATE "20120228" + +#define DRIVER_MAJOR 0 +#define DRIVER_MINOR 1 +#define DRIVER_PATCHLEVEL 0 + +#define PCI_CHIP_AST2000 0x2000 +#define PCI_CHIP_AST2100 0x2010 + +enum ast_chip { + AST2000, + AST2100, + AST1100, + AST2200, + AST2150, + AST2300, + AST2400, + AST2500, + AST2600, +}; + +enum ast_tx_chip { + AST_TX_NONE, + AST_TX_SIL164, + AST_TX_DP501, + AST_TX_ASTDP, +}; + +#define AST_TX_NONE_BIT BIT(AST_TX_NONE) +#define AST_TX_SIL164_BIT BIT(AST_TX_SIL164) +#define AST_TX_DP501_BIT BIT(AST_TX_DP501) +#define AST_TX_ASTDP_BIT BIT(AST_TX_ASTDP) + +#define AST_DRAM_512Mx16 0 +#define AST_DRAM_1Gx16 1 +#define AST_DRAM_512Mx32 2 +#define AST_DRAM_1Gx32 3 +#define AST_DRAM_2Gx16 6 +#define AST_DRAM_4Gx16 7 +#define AST_DRAM_8Gx16 8 + +/* + * Hardware cursor + */ + +#define AST_MAX_HWC_WIDTH 64 +#define AST_MAX_HWC_HEIGHT 64 + +#define AST_HWC_SIZE (AST_MAX_HWC_WIDTH * AST_MAX_HWC_HEIGHT * 2) +#define AST_HWC_SIGNATURE_SIZE 32 + +/* define for signature structure */ +#define AST_HWC_SIGNATURE_CHECKSUM 0x00 +#define AST_HWC_SIGNATURE_SizeX 0x04 +#define AST_HWC_SIGNATURE_SizeY 0x08 +#define AST_HWC_SIGNATURE_X 0x0C +#define AST_HWC_SIGNATURE_Y 0x10 +#define AST_HWC_SIGNATURE_HOTSPOTX 0x14 +#define AST_HWC_SIGNATURE_HOTSPOTY 0x18 + +/* + * Planes + */ + +struct ast_plane { + struct drm_plane base; + + struct drm_gem_vram_object *gbo; + struct iosys_map map; + u64 off; +}; + +static inline struct ast_plane *to_ast_plane(struct drm_plane *plane) +{ + return container_of(plane, struct ast_plane, base); +} + +/* + * Connector with i2c channel + */ + +struct ast_i2c_chan { + struct i2c_adapter adapter; + struct drm_device *dev; + struct i2c_algo_bit_data bit; +}; + +struct ast_vga_connector { + struct drm_connector base; + struct ast_i2c_chan *i2c; +}; + +static inline struct ast_vga_connector * +to_ast_vga_connector(struct drm_connector *connector) +{ + return container_of(connector, struct ast_vga_connector, base); +} + +struct ast_sil164_connector { + struct drm_connector base; + struct ast_i2c_chan *i2c; +}; + +static inline struct ast_sil164_connector * +to_ast_sil164_connector(struct drm_connector *connector) +{ + return container_of(connector, struct ast_sil164_connector, base); +} + +/* + * Device + */ + +struct ast_private { + struct drm_device base; + + struct mutex ioregs_lock; /* Protects access to I/O registers in ioregs */ + void __iomem *regs; + void __iomem *ioregs; + void __iomem *dp501_fw_buf; + + enum ast_chip chip; + bool vga2_clone; + uint32_t dram_bus_width; + uint32_t dram_type; + uint32_t mclk; + + struct drm_plane primary_plane; + struct ast_plane cursor_plane; + struct drm_crtc crtc; + struct { + struct { + struct drm_encoder encoder; + struct ast_vga_connector vga_connector; + } vga; + struct { + struct drm_encoder encoder; + struct ast_sil164_connector sil164_connector; + } sil164; + struct { + struct drm_encoder encoder; + struct drm_connector connector; + } dp501; + struct { + struct drm_encoder encoder; + struct drm_connector connector; + } astdp; + } output; + + bool support_wide_screen; + enum { ast_use_p2a, ast_use_dt, ast_use_defaults } config_mode; + + unsigned long tx_chip_types; /* bitfield of enum ast_chip_type */ + u8 *dp501_fw_addr; + const struct firmware *dp501_fw; /* dp501 fw */ +}; + +static inline struct ast_private *to_ast_private(struct drm_device *dev) +{ + return container_of(dev, struct ast_private, base); +} + +struct ast_private *ast_device_create(const struct drm_driver *drv, + struct pci_dev *pdev, + unsigned long flags); + +#define AST_IO_AR_PORT_WRITE (0x40) +#define AST_IO_MISC_PORT_WRITE (0x42) +#define AST_IO_VGA_ENABLE_PORT (0x43) +#define AST_IO_SEQ_PORT (0x44) +#define AST_IO_DAC_INDEX_READ (0x47) +#define AST_IO_DAC_INDEX_WRITE (0x48) +#define AST_IO_DAC_DATA (0x49) +#define AST_IO_GR_PORT (0x4E) +#define AST_IO_CRTC_PORT (0x54) +#define AST_IO_INPUT_STATUS1_READ (0x5A) +#define AST_IO_MISC_PORT_READ (0x4C) + +#define AST_IO_MM_OFFSET (0x380) + +#define AST_IO_VGAIR1_VREFRESH BIT(3) + +#define AST_IO_VGACRCB_HWC_ENABLED BIT(1) +#define AST_IO_VGACRCB_HWC_16BPP \ + BIT(0) /* set: ARGB4444, cleared: 2bpp palette */ + +static inline u8 ast_read8(struct ast_private *ast, u32 reg) +{ + u8 val = 0; + + val = ioread8(ast->regs + reg); + return val; +} + +static inline u16 ast_read16(struct ast_private *ast, u32 reg) +{ + u16 val = 0; + + val = ioread16(ast->regs + reg); + return val; +} + +static inline u32 ast_read32(struct ast_private *ast, u32 reg) +{ + u32 val = 0; + + val = ioread32(ast->regs + reg); + return val; +} + +static inline u8 ast_io_read8(struct ast_private *ast, u32 reg) +{ + u8 val = 0; + + val = ioread8(ast->ioregs + reg); + return val; +} + +static inline u16 ast_io_read16(struct ast_private *ast, u32 reg) +{ + u16 val = 0; + + val = ioread16(ast->ioregs + reg); + return val; +} + +static inline u32 ast_io_read32(struct ast_private *ast, u32 reg) +{ + u32 val = 0; + + val = ioread32(ast->ioregs + reg); + return val; +} + +#define __ast_write(x) \ + static inline void ast_write##x(struct ast_private *ast, u32 reg, \ + u##x val) \ + { \ + iowrite##x(val, ast->regs + reg); \ + } + +__ast_write(8); +__ast_write(16); +__ast_write(32); + +#define __ast_io_write(x) \ + static inline void ast_io_write##x(struct ast_private *ast, u32 reg, \ + u##x val) \ + { \ + iowrite##x(val, ast->ioregs + reg); \ + } + +__ast_io_write(8); +__ast_io_write(16); +#undef __ast_io_write + +static inline void ast_set_index_reg(struct ast_private *ast, uint32_t base, + uint8_t index, uint8_t val) +{ + ast_io_write16(ast, base, ((u16)val << 8) | index); +} + +void ast_set_index_reg_mask(struct ast_private *ast, uint32_t base, + uint8_t index, uint8_t mask, uint8_t val); +uint8_t ast_get_index_reg(struct ast_private *ast, uint32_t base, + uint8_t index); +uint8_t ast_get_index_reg_mask(struct ast_private *ast, uint32_t base, + uint8_t index, uint8_t mask); + +static inline void ast_open_key(struct ast_private *ast) +{ + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x80, 0xA8); +} + +#define AST_VIDMEM_SIZE_8M 0x00800000 +#define AST_VIDMEM_SIZE_16M 0x01000000 +#define AST_VIDMEM_SIZE_32M 0x02000000 +#define AST_VIDMEM_SIZE_64M 0x04000000 +#define AST_VIDMEM_SIZE_128M 0x08000000 + +#define AST_VIDMEM_DEFAULT_SIZE AST_VIDMEM_SIZE_8M + +struct ast_vbios_stdtable { + u8 misc; + u8 seq[4]; + u8 crtc[25]; + u8 ar[20]; + u8 gr[9]; +}; + +struct ast_vbios_enhtable { + u32 ht; + u32 hde; + u32 hfp; + u32 hsync; + u32 vt; + u32 vde; + u32 vfp; + u32 vsync; + u32 dclk_index; + u32 flags; + u32 refresh_rate; + u32 refresh_rate_index; + u32 mode_id; +}; + +struct ast_vbios_dclk_info { + u8 param1; + u8 param2; + u8 param3; +}; + +struct ast_vbios_mode_info { + const struct ast_vbios_stdtable *std_table; + const struct ast_vbios_enhtable *enh_table; +}; + +struct ast_crtc_state { + struct drm_crtc_state base; + + /* Last known format of primary plane */ + const struct drm_format_info *format; + + struct ast_vbios_mode_info vbios_mode_info; +}; + +#define to_ast_crtc_state(state) \ + container_of(state, struct ast_crtc_state, base) + +int ast_mode_config_init(struct ast_private *ast); + +#define AST_MM_ALIGN_SHIFT 4 +#define AST_MM_ALIGN_MASK ((1 << AST_MM_ALIGN_SHIFT) - 1) + +#define AST_DP501_FW_VERSION_MASK GENMASK(7, 4) +#define AST_DP501_FW_VERSION_1 BIT(4) +#define AST_DP501_PNP_CONNECTED BIT(1) + +#define AST_DP501_DEFAULT_DCLK 65 + +#define AST_DP501_GBL_VERSION 0xf000 +#define AST_DP501_PNPMONITOR 0xf010 +#define AST_DP501_LINKRATE 0xf014 +#define AST_DP501_EDID_DATA 0xf020 + +/* Define for Soc scratched reg */ +#define COPROCESSOR_LAUNCH BIT(5) + +/* + * Display Transmitter Type: + */ +#define TX_TYPE_MASK GENMASK(3, 1) +#define NO_TX (0 << 1) +#define ITE66121_VBIOS_TX (1 << 1) +#define SI164_VBIOS_TX (2 << 1) +#define CH7003_VBIOS_TX (3 << 1) +#define DP501_VBIOS_TX (4 << 1) +#define ANX9807_VBIOS_TX (5 << 1) +#define TX_FW_EMBEDDED_FW_TX (6 << 1) +#define ASTDP_DPMCU_TX (7 << 1) + +#define AST_VRAM_INIT_STATUS_MASK GENMASK(7, 6) +//#define AST_VRAM_INIT_BY_BMC BIT(7) +//#define AST_VRAM_INIT_READY BIT(6) + +/* Define for Soc scratched reg used on ASTDP */ +#define AST_DP_PHY_SLEEP BIT(4) +#define AST_DP_VIDEO_ENABLE BIT(0) + +#define AST_DP_POWER_ON true +#define AST_DP_POWER_OFF false + +/* + * CRD1[b5]: DP MCU FW is executing + * CRDC[b0]: DP link success + * CRDF[b0]: DP HPD + * CRE5[b0]: Host reading EDID process is done + */ +#define ASTDP_MCU_FW_EXECUTING BIT(5) +#define ASTDP_LINK_SUCCESS BIT(0) +#define ASTDP_HPD BIT(0) +#define ASTDP_HOST_EDID_READ_DONE BIT(0) +#define ASTDP_HOST_EDID_READ_DONE_MASK GENMASK(0, 0) + +/* + * CRB8[b1]: Enable VSYNC off + * CRB8[b0]: Enable HSYNC off + */ +#define AST_DPMS_VSYNC_OFF BIT(1) +#define AST_DPMS_HSYNC_OFF BIT(0) + +/* + * CRDF[b4]: Mirror of AST_DP_VIDEO_ENABLE + * Precondition: A. ~AST_DP_PHY_SLEEP && + * B. DP_HPD && + * C. DP_LINK_SUCCESS + */ +#define ASTDP_MIRROR_VIDEO_ENABLE BIT(4) + +#define ASTDP_EDID_READ_POINTER_MASK GENMASK(7, 0) +#define ASTDP_EDID_VALID_FLAG_MASK GENMASK(0, 0) +#define ASTDP_EDID_READ_DATA_MASK GENMASK(7, 0) + +/* + * ASTDP setmode registers: + * CRE0[7:0]: MISC0 ((0x00: 18-bpp) or (0x20: 24-bpp) + * CRE1[7:0]: MISC1 (default: 0x00) + * CRE2[7:0]: video format index (0x00 ~ 0x20 or 0x40 ~ 0x50) + */ +#define ASTDP_MISC0_24bpp BIT(5) +#define ASTDP_MISC1 0 +#define ASTDP_AND_CLEAR_MASK 0x00 + +/* + * ASTDP resoultion table: + * EX: ASTDP_A_B_C: + * A: Resolution + * B: Refresh Rate + * C: Misc information, such as CVT, Reduce Blanked + */ +#define ASTDP_640x480_60 0x00 +#define ASTDP_640x480_72 0x01 +#define ASTDP_640x480_75 0x02 +#define ASTDP_640x480_85 0x03 +#define ASTDP_800x600_56 0x04 +#define ASTDP_800x600_60 0x05 +#define ASTDP_800x600_72 0x06 +#define ASTDP_800x600_75 0x07 +#define ASTDP_800x600_85 0x08 +#define ASTDP_1024x768_60 0x09 +#define ASTDP_1024x768_70 0x0A +#define ASTDP_1024x768_75 0x0B +#define ASTDP_1024x768_85 0x0C +#define ASTDP_1280x1024_60 0x0D +#define ASTDP_1280x1024_75 0x0E +#define ASTDP_1280x1024_85 0x0F +#define ASTDP_1600x1200_60 0x10 +#define ASTDP_320x240_60 0x11 +#define ASTDP_400x300_60 0x12 +#define ASTDP_512x384_60 0x13 +#define ASTDP_1920x1200_60 0x14 +#define ASTDP_1920x1080_60 0x15 +#define ASTDP_1280x800_60 0x16 +#define ASTDP_1280x800_60_RB 0x17 +#define ASTDP_1440x900_60 0x18 +#define ASTDP_1440x900_60_RB 0x19 +#define ASTDP_1680x1050_60 0x1A +#define ASTDP_1680x1050_60_RB 0x1B +#define ASTDP_1600x900_60 0x1C +#define ASTDP_1600x900_60_RB 0x1D +#define ASTDP_1366x768_60 0x1E +#define ASTDP_1152x864_75 0x1F + +int ast_mm_init(struct ast_private *ast); + +/* ast post */ +void ast_enable_vga(struct drm_device *dev); +void ast_enable_mmio(struct drm_device *dev); +bool ast_is_vga_enabled(struct drm_device *dev); +void ast_post_gpu(struct drm_device *dev); +u32 ast_mindwm(struct ast_private *ast, u32 r); +void ast_moutdwm(struct ast_private *ast, u32 r, u32 v); +void ast_patch_ahb_2500(struct ast_private *ast); +/* ast dp501 */ +void ast_set_dp501_video_output(struct drm_device *dev, u8 mode); +bool ast_backup_fw(struct drm_device *dev, u8 *addr, u32 size); +bool ast_dp501_read_edid(struct drm_device *dev, u8 *ediddata); +u8 ast_get_dp501_max_clk(struct drm_device *dev); +void ast_init_3rdtx(struct drm_device *dev); + +/* ast_i2c.c */ +struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev); + +/* aspeed DP */ +int ast_astdp_read_edid(struct drm_device *dev, u8 *ediddata); +void ast_dp_launch(struct drm_device *dev, u8 bPower); +void ast_dp_power_on_off(struct drm_device *dev, bool no); +void ast_dp_set_on_off(struct drm_device *dev, bool no); +void ast_dp_set_mode(struct drm_crtc *crtc, + struct ast_vbios_mode_info *vbios_mode); + +#endif diff --git a/drivers/gpu/drm/loongson/ast_old/ast_i2c.c b/drivers/gpu/drm/loongson/ast_old/ast_i2c.c new file mode 100644 index 000000000000..a3daabe3b6a6 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_i2c.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: MIT +/* + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + */ + +#include <drm/drm_managed.h> +#include <drm/drm_print.h> + +#include "ast_drv.h" + +static void ast_i2c_setsda(void *i2c_priv, int data) +{ + struct ast_i2c_chan *i2c = i2c_priv; + struct ast_private *ast = to_ast_private(i2c->dev); + int i; + u8 ujcrb7, jtemp; + + for (i = 0; i < 0x10000; i++) { + ujcrb7 = ((data & 0x01) ? 0 : 1) << 2; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, + ujcrb7); + jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, + 0x04); + if (ujcrb7 == jtemp) + break; + } +} + +static void ast_i2c_setscl(void *i2c_priv, int clock) +{ + struct ast_i2c_chan *i2c = i2c_priv; + struct ast_private *ast = to_ast_private(i2c->dev); + int i; + u8 ujcrb7, jtemp; + + for (i = 0; i < 0x10000; i++) { + ujcrb7 = ((clock & 0x01) ? 0 : 1); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, + ujcrb7); + jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, + 0x01); + if (ujcrb7 == jtemp) + break; + } +} + +static int ast_i2c_getsda(void *i2c_priv) +{ + struct ast_i2c_chan *i2c = i2c_priv; + struct ast_private *ast = to_ast_private(i2c->dev); + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & + 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, + 0x20) >> + 5) & + 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, + 0xb7, 0x20) >> + 5) & + 0x01; + } + } while ((pass < 5) && (count++ < 0x10000)); + + return val & 1 ? 1 : 0; +} + +static int ast_i2c_getscl(void *i2c_priv) +{ + struct ast_i2c_chan *i2c = i2c_priv; + struct ast_private *ast = to_ast_private(i2c->dev); + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & + 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, + 0x10) >> + 4) & + 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, + 0xb7, 0x10) >> + 4) & + 0x01; + } + } while ((pass < 5) && (count++ < 0x10000)); + + return val & 1 ? 1 : 0; +} + +static void ast_i2c_release(struct drm_device *dev, void *res) +{ + struct ast_i2c_chan *i2c = res; + + i2c_del_adapter(&i2c->adapter); + kfree(i2c); +} + +struct ast_i2c_chan *ast_i2c_create(struct drm_device *dev) +{ + struct ast_i2c_chan *i2c; + int ret; + + i2c = kzalloc(sizeof(struct ast_i2c_chan), GFP_KERNEL); + if (!i2c) + return NULL; + + i2c->adapter.owner = THIS_MODULE; + i2c->adapter.class = I2C_CLASS_DDC; + i2c->adapter.dev.parent = dev->dev; + i2c->dev = dev; + i2c_set_adapdata(&i2c->adapter, i2c); + snprintf(i2c->adapter.name, sizeof(i2c->adapter.name), + "AST i2c bit bus"); + i2c->adapter.algo_data = &i2c->bit; + + i2c->bit.udelay = 20; + i2c->bit.timeout = 2; + i2c->bit.data = i2c; + i2c->bit.setsda = ast_i2c_setsda; + i2c->bit.setscl = ast_i2c_setscl; + i2c->bit.getsda = ast_i2c_getsda; + i2c->bit.getscl = ast_i2c_getscl; + ret = i2c_bit_add_bus(&i2c->adapter); + if (ret) { + drm_err(dev, "Failed to register bit i2c\n"); + goto out_kfree; + } + + ret = drmm_add_action_or_reset(dev, ast_i2c_release, i2c); + if (ret) + return NULL; + return i2c; + +out_kfree: + kfree(i2c); + return NULL; +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_main.c b/drivers/gpu/drm/loongson/ast_old/ast_main.c new file mode 100644 index 000000000000..ab6195b61b95 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_main.c @@ -0,0 +1,486 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ + +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_drv.h> +#include <drm/drm_gem.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> + +#include "ast_drv.h" + +void ast_set_index_reg_mask(struct ast_private *ast, uint32_t base, + uint8_t index, uint8_t mask, uint8_t val) +{ + u8 tmp; + + ast_io_write8(ast, base, index); + tmp = (ast_io_read8(ast, base + 1) & mask) | val; + ast_set_index_reg(ast, base, index, tmp); +} + +uint8_t ast_get_index_reg(struct ast_private *ast, uint32_t base, uint8_t index) +{ + uint8_t ret; + + ast_io_write8(ast, base, index); + ret = ast_io_read8(ast, base + 1); + return ret; +} + +uint8_t ast_get_index_reg_mask(struct ast_private *ast, uint32_t base, + uint8_t index, uint8_t mask) +{ + uint8_t ret; + + ast_io_write8(ast, base, index); + ret = ast_io_read8(ast, base + 1) & mask; + return ret; +} + +static void ast_detect_config_mode(struct drm_device *dev, u32 *scu_rev) +{ + struct device_node *np = dev->dev->of_node; + struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + uint32_t data, jregd0, jregd1; + + /* Defaults */ + ast->config_mode = ast_use_defaults; + *scu_rev = 0xffffffff; + + /* Check if we have device-tree properties */ + if (np && + !of_property_read_u32(np, "aspeed,scu-revision-id", scu_rev)) { + /* We do, disable P2A access */ + ast->config_mode = ast_use_dt; + drm_info(dev, "Using device-tree for configuration\n"); + return; + } + + /* Not all families have a P2A bridge */ + if (pdev->device != PCI_CHIP_AST2000) + return; + + /* + * The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge + * is disabled. We force using P2A if VGA only mode bit + * is set D[7] + */ + jregd0 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + jregd1 = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff); + if (!(jregd0 & 0x80) || !(jregd1 & 0x10)) { + /* Patch AST2500 */ + if (((pdev->revision & 0xF0) == 0x40) && + ((jregd0 & AST_VRAM_INIT_STATUS_MASK) == 0)) + ast_patch_ahb_2500(ast); + + /* Double check it's actually working */ + data = ast_read32(ast, 0xf004); + if ((data != 0xFFFFFFFF) && (data != 0x00)) { + /* P2A works, grab silicon revision */ + ast->config_mode = ast_use_p2a; + + drm_info(dev, "Using P2A bridge for configuration\n"); + + /* Read SCU7c (silicon revision register) */ + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + *scu_rev = ast_read32(ast, 0x1207c); + return; + } + } + + /* We have a P2A bridge but it's disabled */ + drm_info(dev, "P2A bridge disabled, using default configuration\n"); +} + +static int ast_detect_chip(struct drm_device *dev, bool *need_post) +{ + struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + uint32_t jreg, scu_rev; + + /* + * If VGA isn't enabled, we need to enable now or subsequent + * access to the scratch registers will fail. We also inform + * our caller that it needs to POST the chip + * (Assumption: VGA not enabled -> need to POST) + */ + if (!ast_is_vga_enabled(dev)) { + ast_enable_vga(dev); + drm_info(dev, + "VGA not enabled on entry, requesting chip POST\n"); + *need_post = true; + } else + *need_post = false; + + /* Enable extended register access */ + ast_open_key(ast); + ast_enable_mmio(dev); + + /* Find out whether P2A works or whether to use device-tree */ + ast_detect_config_mode(dev, &scu_rev); + + /* Identify chipset */ + if (pdev->revision >= 0x50) { + ast->chip = AST2600; + drm_info(dev, "AST 2600 detected\n"); + } else if (pdev->revision >= 0x40) { + ast->chip = AST2500; + drm_info(dev, "AST 2500 detected\n"); + } else if (pdev->revision >= 0x30) { + ast->chip = AST2400; + drm_info(dev, "AST 2400 detected\n"); + } else if (pdev->revision >= 0x20) { + ast->chip = AST2300; + drm_info(dev, "AST 2300 detected\n"); + } else if (pdev->revision >= 0x10) { + switch (scu_rev & 0x0300) { + case 0x0200: + ast->chip = AST1100; + drm_info(dev, "AST 1100 detected\n"); + break; + case 0x0100: + ast->chip = AST2200; + drm_info(dev, "AST 2200 detected\n"); + break; + case 0x0000: + ast->chip = AST2150; + drm_info(dev, "AST 2150 detected\n"); + break; + default: + ast->chip = AST2100; + drm_info(dev, "AST 2100 detected\n"); + break; + } + ast->vga2_clone = false; + } else { + ast->chip = AST2000; + drm_info(dev, "AST 2000 detected\n"); + } + + /* Check if we support wide screen */ + switch (ast->chip) { + case AST2000: + ast->support_wide_screen = false; + break; + default: + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, + 0xff); + if (!(jreg & 0x80)) + ast->support_wide_screen = true; + else if (jreg & 0x01) + ast->support_wide_screen = true; + else { + ast->support_wide_screen = false; + if (ast->chip == AST2300 && + (scu_rev & 0x300) == 0x0) /* ast1300 */ + ast->support_wide_screen = true; + if (ast->chip == AST2400 && + (scu_rev & 0x300) == 0x100) /* ast1400 */ + ast->support_wide_screen = true; + if (ast->chip == AST2500 && + scu_rev == 0x100) /* ast2510 */ + ast->support_wide_screen = true; + if (ast->chip == AST2600) /* ast2600 */ + ast->support_wide_screen = true; + } + break; + } + + /* Check 3rd Tx option (digital output afaik) */ + ast->tx_chip_types |= AST_TX_NONE_BIT; + + /* + * VGACRA3 Enhanced Color Mode Register, check if DVO is already + * enabled, in that case, assume we have a SIL164 TMDS transmitter + * + * Don't make that assumption if we the chip wasn't enabled and + * is at power-on reset, otherwise we'll incorrectly "detect" a + * SIL164 when there is none. + */ + if (!*need_post) { + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, + 0xff); + if (jreg & 0x80) + ast->tx_chip_types = AST_TX_SIL164_BIT; + } + + if ((ast->chip == AST2300) || (ast->chip == AST2400) || + (ast->chip == AST2500)) { + /* + * On AST2300 and 2400, look the configuration set by the SoC in + * the SOC scratch register #1 bits 11:8 (interestingly marked + * as "reserved" in the spec) + */ + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, + 0xff); + switch (jreg) { + case 0x04: + ast->tx_chip_types = AST_TX_SIL164_BIT; + break; + case 0x08: + ast->dp501_fw_addr = + drmm_kzalloc(dev, 32 * 1024, GFP_KERNEL); + if (ast->dp501_fw_addr) { + /* backup firmware */ + if (ast_backup_fw(dev, ast->dp501_fw_addr, + 32 * 1024)) { + drmm_kfree(dev, ast->dp501_fw_addr); + ast->dp501_fw_addr = NULL; + } + } + fallthrough; + case 0x0c: + ast->tx_chip_types = AST_TX_DP501_BIT; + } + } else if (ast->chip == AST2600) + ast_dp_launch(&ast->base, 0); + + /* Print stuff for diagnostic purposes */ + if (ast->tx_chip_types & AST_TX_NONE_BIT) + drm_info(dev, "Using analog VGA\n"); + if (ast->tx_chip_types & AST_TX_SIL164_BIT) + drm_info(dev, "Using Sil164 TMDS transmitter\n"); + if (ast->tx_chip_types & AST_TX_DP501_BIT) + drm_info(dev, "Using DP501 DisplayPort transmitter\n"); + + return 0; +} + +static int ast_get_dram_info(struct drm_device *dev) +{ + struct device_node *np = dev->dev->of_node; + struct ast_private *ast = to_ast_private(dev); + uint32_t mcr_cfg, mcr_scu_mpll, mcr_scu_strap; + uint32_t denum, num, div, ref_pll, dsel; + + switch (ast->config_mode) { + case ast_use_dt: + /* + * If some properties are missing, use reasonable + * defaults for AST2400 + */ + if (of_property_read_u32(np, "aspeed,mcr-configuration", + &mcr_cfg)) + mcr_cfg = 0x00000577; + if (of_property_read_u32(np, "aspeed,mcr-scu-mpll", + &mcr_scu_mpll)) + mcr_scu_mpll = 0x000050C0; + if (of_property_read_u32(np, "aspeed,mcr-scu-strap", + &mcr_scu_strap)) + mcr_scu_strap = 0; + break; + case ast_use_p2a: + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + mcr_cfg = ast_read32(ast, 0x10004); + mcr_scu_mpll = ast_read32(ast, 0x10120); + mcr_scu_strap = ast_read32(ast, 0x10170); + break; + case ast_use_defaults: + default: + ast->dram_bus_width = 16; + ast->dram_type = AST_DRAM_1Gx16; + if (ast->chip == AST2500) + ast->mclk = 800; + else + ast->mclk = 396; + return 0; + } + + if (mcr_cfg & 0x40) + ast->dram_bus_width = 16; + else + ast->dram_bus_width = 32; + + if (ast->chip == AST2500) { + switch (mcr_cfg & 0x03) { + case 0: + ast->dram_type = AST_DRAM_1Gx16; + break; + default: + case 1: + ast->dram_type = AST_DRAM_2Gx16; + break; + case 2: + ast->dram_type = AST_DRAM_4Gx16; + break; + case 3: + ast->dram_type = AST_DRAM_8Gx16; + break; + } + } else if (ast->chip == AST2300 || ast->chip == AST2400) { + switch (mcr_cfg & 0x03) { + case 0: + ast->dram_type = AST_DRAM_512Mx16; + break; + default: + case 1: + ast->dram_type = AST_DRAM_1Gx16; + break; + case 2: + ast->dram_type = AST_DRAM_2Gx16; + break; + case 3: + ast->dram_type = AST_DRAM_4Gx16; + break; + } + } else { + switch (mcr_cfg & 0x0c) { + case 0: + case 4: + ast->dram_type = AST_DRAM_512Mx16; + break; + case 8: + if (mcr_cfg & 0x40) + ast->dram_type = AST_DRAM_1Gx16; + else + ast->dram_type = AST_DRAM_512Mx32; + break; + case 0xc: + ast->dram_type = AST_DRAM_1Gx32; + break; + } + } + + if (mcr_scu_strap & 0x2000) + ref_pll = 14318; + else + ref_pll = 12000; + + denum = mcr_scu_mpll & 0x1f; + num = (mcr_scu_mpll & 0x3fe0) >> 5; + dsel = (mcr_scu_mpll & 0xc000) >> 14; + switch (dsel) { + case 3: + div = 0x4; + break; + case 2: + case 1: + div = 0x2; + break; + default: + div = 0x1; + break; + } + ast->mclk = ref_pll * (num + 2) / ((denum + 2) * (div * 1000)); + return 0; +} + +/* + * Run this function as part of the HW device cleanup; not + * when the DRM device gets released. + */ +static void ast_device_release(void *data) +{ + struct ast_private *ast = data; + + /* enable standard VGA decode */ + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x04); +} + +struct ast_private *ast_device_create(const struct drm_driver *drv, + struct pci_dev *pdev, unsigned long flags) +{ + struct drm_device *dev; + struct ast_private *ast; + bool need_post; + int ret = 0; + + ast = devm_drm_dev_alloc(&pdev->dev, drv, struct ast_private, base); + if (IS_ERR(ast)) + return ast; + dev = &ast->base; + + pci_set_drvdata(pdev, dev); + + ret = drmm_mutex_init(dev, &ast->ioregs_lock); + if (ret) + return ERR_PTR(ret); + + ast->regs = pcim_iomap(pdev, 1, 0); + if (!ast->regs) + return ERR_PTR(-EIO); + + /* + * If we don't have IO space at all, use MMIO now and + * assume the chip has MMIO enabled by default (rev 0x20 + * and higher). + */ + if (!(pci_resource_flags(pdev, 2) & IORESOURCE_IO)) { + drm_info(dev, "platform has no IO space, trying MMIO\n"); + ast->ioregs = ast->regs + AST_IO_MM_OFFSET; + } + + /* "map" IO regs if the above hasn't done so already */ + if (!ast->ioregs) { + ast->ioregs = pcim_iomap(pdev, 2, 0); + if (!ast->ioregs) + return ERR_PTR(-EIO); + } + + ast_detect_chip(dev, &need_post); + + ret = ast_get_dram_info(dev); + if (ret) + return ERR_PTR(ret); + + drm_info(dev, "dram MCLK=%u Mhz type=%d bus_width=%d\n", ast->mclk, + ast->dram_type, ast->dram_bus_width); + + if (need_post) + ast_post_gpu(dev); + + ret = ast_mm_init(ast); + if (ret) + return ERR_PTR(ret); + + /* map reserved buffer */ + ast->dp501_fw_buf = NULL; + if (dev->vram_mm->vram_size < pci_resource_len(pdev, 0)) { + ast->dp501_fw_buf = + pci_iomap_range(pdev, 0, dev->vram_mm->vram_size, 0); + if (!ast->dp501_fw_buf) + drm_info(dev, "failed to map reserved buffer!\n"); + } + + ret = ast_mode_config_init(ast); + if (ret) + return ERR_PTR(ret); + + ret = devm_add_action_or_reset(dev->dev, ast_device_release, ast); + if (ret) + return ERR_PTR(ret); + + return ast; +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_mm.c b/drivers/gpu/drm/loongson/ast_old/ast_mm.c new file mode 100644 index 000000000000..6e999408dda9 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_mm.c @@ -0,0 +1,101 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ + +#include <linux/pci.h> + +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_print.h> + +#include "ast_drv.h" + +static u32 ast_get_vram_size(struct ast_private *ast) +{ + u8 jreg; + u32 vram_size; + + ast_open_key(ast); + + vram_size = AST_VIDMEM_DEFAULT_SIZE; + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xaa, 0xff); + switch (jreg & 3) { + case 0: + vram_size = AST_VIDMEM_SIZE_8M; + break; + case 1: + vram_size = AST_VIDMEM_SIZE_16M; + break; + case 2: + vram_size = AST_VIDMEM_SIZE_32M; + break; + case 3: + vram_size = AST_VIDMEM_SIZE_64M; + break; + } + + jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x99, 0xff); + switch (jreg & 0x03) { + case 1: + vram_size -= 0x100000; + break; + case 2: + vram_size -= 0x200000; + break; + case 3: + vram_size -= 0x400000; + break; + } + + return vram_size; +} + +int ast_mm_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct pci_dev *pdev = to_pci_dev(dev->dev); + resource_size_t base, size; + u32 vram_size; + int ret; + + base = pci_resource_start(pdev, 0); + size = pci_resource_len(pdev, 0); + + /* Don't fail on errors, but performance might be reduced. */ + devm_arch_io_reserve_memtype_wc(dev->dev, base, size); + devm_arch_phys_wc_add(dev->dev, base, size); + + vram_size = ast_get_vram_size(ast); + + ret = drmm_vram_helper_init(dev, base, vram_size); + if (ret) { + drm_err(dev, "Error initializing VRAM MM; %d\n", ret); + return ret; + } + + return 0; +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_mode.c b/drivers/gpu/drm/loongson/ast_old/ast_mode.c new file mode 100644 index 000000000000..5374fc38757f --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_mode.c @@ -0,0 +1,1881 @@ +/* + * Copyright 2012 Red Hat Inc. + * Parts based on xf86-video-ast + * Copyright (c) 2005 ASPEED Technology Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ + +#include <linux/export.h> +#include <linux/pci.h> + +#include <drm/drm_atomic.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_atomic_state_helper.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> +#include <drm/drm_fourcc.h> +#include <drm/drm_gem_atomic_helper.h> +#include <drm/drm_gem_framebuffer_helper.h> +#include <drm/drm_gem_vram_helper.h> +#include <drm/drm_managed.h> +#include <drm/drm_probe_helper.h> +#include <drm/drm_simple_kms_helper.h> + +#include "ast_drv.h" +#include "ast_tables.h" + +#define AST_LUT_SIZE 256 + +static inline void ast_load_palette_index(struct ast_private *ast, u8 index, + u8 red, u8 green, u8 blue) +{ + ast_io_write8(ast, AST_IO_DAC_INDEX_WRITE, index); + ast_io_read8(ast, AST_IO_SEQ_PORT); + ast_io_write8(ast, AST_IO_DAC_DATA, red); + ast_io_read8(ast, AST_IO_SEQ_PORT); + ast_io_write8(ast, AST_IO_DAC_DATA, green); + ast_io_read8(ast, AST_IO_SEQ_PORT); + ast_io_write8(ast, AST_IO_DAC_DATA, blue); + ast_io_read8(ast, AST_IO_SEQ_PORT); +} + +static void ast_crtc_set_gamma_linear(struct ast_private *ast, + const struct drm_format_info *format) +{ + int i; + + switch (format->format) { + case DRM_FORMAT_C8: /* In this case, gamma table is used as color palette */ + case DRM_FORMAT_RGB565: + case DRM_FORMAT_XRGB8888: + for (i = 0; i < AST_LUT_SIZE; i++) + ast_load_palette_index(ast, i, i, i, i); + break; + default: + drm_warn_once(&ast->base, + "Unsupported format %p4cc for gamma correction\n", + &format->format); + break; + } +} + +static void ast_crtc_set_gamma(struct ast_private *ast, + const struct drm_format_info *format, + struct drm_color_lut *lut) +{ + int i; + + switch (format->format) { + case DRM_FORMAT_C8: /* In this case, gamma table is used as color palette */ + case DRM_FORMAT_RGB565: + case DRM_FORMAT_XRGB8888: + for (i = 0; i < AST_LUT_SIZE; i++) + ast_load_palette_index(ast, i, lut[i].red >> 8, + lut[i].green >> 8, + lut[i].blue >> 8); + break; + default: + drm_warn_once(&ast->base, + "Unsupported format %p4cc for gamma correction\n", + &format->format); + break; + } +} + +static bool ast_get_vbios_mode_info(const struct drm_format_info *format, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, + struct ast_vbios_mode_info *vbios_mode) +{ + u32 refresh_rate_index = 0, refresh_rate; + const struct ast_vbios_enhtable *best = NULL; + u32 hborder, vborder; + bool check_sync; + + switch (format->cpp[0] * 8) { + case 8: + vbios_mode->std_table = &vbios_stdtable[VGAModeIndex]; + break; + case 16: + vbios_mode->std_table = &vbios_stdtable[HiCModeIndex]; + break; + case 24: + case 32: + vbios_mode->std_table = &vbios_stdtable[TrueCModeIndex]; + break; + default: + return false; + } + + switch (mode->crtc_hdisplay) { + case 640: + vbios_mode->enh_table = &res_640x480[refresh_rate_index]; + break; + case 800: + vbios_mode->enh_table = &res_800x600[refresh_rate_index]; + break; + case 1024: + vbios_mode->enh_table = &res_1024x768[refresh_rate_index]; + break; + case 1152: + vbios_mode->enh_table = &res_1152x864[refresh_rate_index]; + break; + case 1280: + if (mode->crtc_vdisplay == 800) + vbios_mode->enh_table = + &res_1280x800[refresh_rate_index]; + else + vbios_mode->enh_table = + &res_1280x1024[refresh_rate_index]; + break; + case 1360: + vbios_mode->enh_table = &res_1360x768[refresh_rate_index]; + break; + case 1440: + vbios_mode->enh_table = &res_1440x900[refresh_rate_index]; + break; + case 1600: + if (mode->crtc_vdisplay == 900) + vbios_mode->enh_table = + &res_1600x900[refresh_rate_index]; + else + vbios_mode->enh_table = + &res_1600x1200[refresh_rate_index]; + break; + case 1680: + vbios_mode->enh_table = &res_1680x1050[refresh_rate_index]; + break; + case 1920: + if (mode->crtc_vdisplay == 1080) + vbios_mode->enh_table = + &res_1920x1080[refresh_rate_index]; + else + vbios_mode->enh_table = + &res_1920x1200[refresh_rate_index]; + break; + default: + return false; + } + + refresh_rate = drm_mode_vrefresh(mode); + check_sync = vbios_mode->enh_table->flags & WideScreenMode; + + while (1) { + const struct ast_vbios_enhtable *loop = vbios_mode->enh_table; + + while (loop->refresh_rate != 0xff) { + if ((check_sync) && + (((mode->flags & DRM_MODE_FLAG_NVSYNC) && + (loop->flags & PVSync)) || + ((mode->flags & DRM_MODE_FLAG_PVSYNC) && + (loop->flags & NVSync)) || + ((mode->flags & DRM_MODE_FLAG_NHSYNC) && + (loop->flags & PHSync)) || + ((mode->flags & DRM_MODE_FLAG_PHSYNC) && + (loop->flags & NHSync)))) { + loop++; + continue; + } + if (loop->refresh_rate <= refresh_rate && + (!best || loop->refresh_rate > best->refresh_rate)) + best = loop; + loop++; + } + if (best || !check_sync) + break; + check_sync = 0; + } + + if (best) + vbios_mode->enh_table = best; + + hborder = (vbios_mode->enh_table->flags & HBorder) ? 8 : 0; + vborder = (vbios_mode->enh_table->flags & VBorder) ? 8 : 0; + + adjusted_mode->crtc_htotal = vbios_mode->enh_table->ht; + adjusted_mode->crtc_hblank_start = vbios_mode->enh_table->hde + hborder; + adjusted_mode->crtc_hblank_end = vbios_mode->enh_table->ht - hborder; + adjusted_mode->crtc_hsync_start = vbios_mode->enh_table->hde + hborder + + vbios_mode->enh_table->hfp; + adjusted_mode->crtc_hsync_end = + (vbios_mode->enh_table->hde + hborder + + vbios_mode->enh_table->hfp + vbios_mode->enh_table->hsync); + + adjusted_mode->crtc_vtotal = vbios_mode->enh_table->vt; + adjusted_mode->crtc_vblank_start = vbios_mode->enh_table->vde + vborder; + adjusted_mode->crtc_vblank_end = vbios_mode->enh_table->vt - vborder; + adjusted_mode->crtc_vsync_start = vbios_mode->enh_table->vde + vborder + + vbios_mode->enh_table->vfp; + adjusted_mode->crtc_vsync_end = + (vbios_mode->enh_table->vde + vborder + + vbios_mode->enh_table->vfp + vbios_mode->enh_table->vsync); + + return true; +} + +static void +ast_set_vbios_color_reg(struct ast_private *ast, + const struct drm_format_info *format, + const struct ast_vbios_mode_info *vbios_mode) +{ + u32 color_index; + + switch (format->cpp[0]) { + case 1: + color_index = VGAModeIndex - 1; + break; + case 2: + color_index = HiCModeIndex; + break; + case 3: + case 4: + color_index = TrueCModeIndex; + break; + default: + return; + } + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8c, + (u8)((color_index & 0x0f) << 4)); + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0x00); + + if (vbios_mode->enh_table->flags & NewModeInfo) { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x92, + format->cpp[0] * 8); + } +} + +static void ast_set_vbios_mode_reg(struct ast_private *ast, + const struct drm_display_mode *adjusted_mode, + const struct ast_vbios_mode_info *vbios_mode) +{ + u32 refresh_rate_index, mode_id; + + refresh_rate_index = vbios_mode->enh_table->refresh_rate_index; + mode_id = vbios_mode->enh_table->mode_id; + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8d, + refresh_rate_index & 0xff); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x8e, mode_id & 0xff); + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0x00); + + if (vbios_mode->enh_table->flags & NewModeInfo) { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x91, 0xa8); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x93, + adjusted_mode->clock / 1000); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x94, + adjusted_mode->crtc_hdisplay); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x95, + adjusted_mode->crtc_hdisplay >> 8); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x96, + adjusted_mode->crtc_vdisplay); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x97, + adjusted_mode->crtc_vdisplay >> 8); + } +} + +static void ast_set_std_reg(struct ast_private *ast, + struct drm_display_mode *mode, + struct ast_vbios_mode_info *vbios_mode) +{ + const struct ast_vbios_stdtable *stdtable; + u32 i; + u8 jreg; + + stdtable = vbios_mode->std_table; + + jreg = stdtable->misc; + ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, jreg); + + /* Set SEQ; except Screen Disable field */ + ast_set_index_reg(ast, AST_IO_SEQ_PORT, 0x00, 0x03); + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, + stdtable->seq[0]); + for (i = 1; i < 4; i++) { + jreg = stdtable->seq[i]; + ast_set_index_reg(ast, AST_IO_SEQ_PORT, (i + 1), jreg); + } + + /* Set CRTC; except base address and offset */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x00); + for (i = 0; i < 12; i++) + ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, stdtable->crtc[i]); + for (i = 14; i < 19; i++) + ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, stdtable->crtc[i]); + for (i = 20; i < 25; i++) + ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, stdtable->crtc[i]); + + /* set AR */ + jreg = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ); + for (i = 0; i < 20; i++) { + jreg = stdtable->ar[i]; + ast_io_write8(ast, AST_IO_AR_PORT_WRITE, (u8)i); + ast_io_write8(ast, AST_IO_AR_PORT_WRITE, jreg); + } + ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x14); + ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x00); + + jreg = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ); + ast_io_write8(ast, AST_IO_AR_PORT_WRITE, 0x20); + + /* Set GR */ + for (i = 0; i < 9; i++) + ast_set_index_reg(ast, AST_IO_GR_PORT, i, stdtable->gr[i]); +} + +static void ast_set_crtc_reg(struct ast_private *ast, + struct drm_display_mode *mode, + struct ast_vbios_mode_info *vbios_mode) +{ + u8 jreg05 = 0, jreg07 = 0, jreg09 = 0, jregAC = 0, jregAD = 0, + jregAE = 0; + u16 temp, precache = 0; + + if ((ast->chip == AST2500 || ast->chip == AST2600) && + (vbios_mode->enh_table->flags & AST2500PreCatchCRT)) + precache = 40; + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x00); + + temp = (mode->crtc_htotal >> 3) - 5; + if (temp & 0x100) + jregAC |= 0x01; /* HT D[8] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x00, 0x00, temp); + + temp = (mode->crtc_hdisplay >> 3) - 1; + if (temp & 0x100) + jregAC |= 0x04; /* HDE D[8] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x01, 0x00, temp); + + temp = (mode->crtc_hblank_start >> 3) - 1; + if (temp & 0x100) + jregAC |= 0x10; /* HBS D[8] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x02, 0x00, temp); + + temp = ((mode->crtc_hblank_end >> 3) - 1) & 0x7f; + if (temp & 0x20) + jreg05 |= 0x80; /* HBE D[5] */ + if (temp & 0x40) + jregAD |= 0x01; /* HBE D[5] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x03, 0xE0, + (temp & 0x1f)); + + temp = ((mode->crtc_hsync_start - precache) >> 3) - 1; + if (temp & 0x100) + jregAC |= 0x40; /* HRS D[5] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x04, 0x00, temp); + + temp = (((mode->crtc_hsync_end - precache) >> 3) - 1) & 0x3f; + if (temp & 0x20) + jregAD |= 0x04; /* HRE D[5] */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x05, 0x60, + (u8)((temp & 0x1f) | jreg05)); + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAC, 0x00, jregAC); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAD, 0x00, jregAD); + + // Workaround for HSync Time non octave pixels (1920x1080@60Hz HSync 44 pixels); + if ((ast->chip == AST2600) && (mode->crtc_vdisplay == 1080)) + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xFC, 0xFD, 0x02); + else + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xFC, 0xFD, 0x00); + + /* vert timings */ + temp = (mode->crtc_vtotal) - 2; + if (temp & 0x100) + jreg07 |= 0x01; + if (temp & 0x200) + jreg07 |= 0x20; + if (temp & 0x400) + jregAE |= 0x01; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x06, 0x00, temp); + + temp = (mode->crtc_vsync_start) - 1; + if (temp & 0x100) + jreg07 |= 0x04; + if (temp & 0x200) + jreg07 |= 0x80; + if (temp & 0x400) + jregAE |= 0x08; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x10, 0x00, temp); + + temp = (mode->crtc_vsync_end - 1) & 0x3f; + if (temp & 0x10) + jregAE |= 0x20; + if (temp & 0x20) + jregAE |= 0x40; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x70, temp & 0xf); + + temp = mode->crtc_vdisplay - 1; + if (temp & 0x100) + jreg07 |= 0x02; + if (temp & 0x200) + jreg07 |= 0x40; + if (temp & 0x400) + jregAE |= 0x02; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x12, 0x00, temp); + + temp = mode->crtc_vblank_start - 1; + if (temp & 0x100) + jreg07 |= 0x08; + if (temp & 0x200) + jreg09 |= 0x20; + if (temp & 0x400) + jregAE |= 0x04; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x15, 0x00, temp); + + temp = mode->crtc_vblank_end - 1; + if (temp & 0x100) + jregAE |= 0x10; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x16, 0x00, temp); + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x07, 0x00, jreg07); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x09, 0xdf, jreg09); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xAE, 0x00, + (jregAE | 0x80)); + + if (precache) + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0x3f, 0x80); + else + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0x3f, 0x00); + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x11, 0x7f, 0x80); +} + +static void ast_set_offset_reg(struct ast_private *ast, + struct drm_framebuffer *fb) +{ + u16 offset; + + offset = fb->pitches[0] >> 3; + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x13, (offset & 0xff)); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xb0, (offset >> 8) & 0x3f); +} + +static void ast_set_dclk_reg(struct ast_private *ast, + struct drm_display_mode *mode, + struct ast_vbios_mode_info *vbios_mode) +{ + const struct ast_vbios_dclk_info *clk_info; + + if ((ast->chip == AST2500) || (ast->chip == AST2600)) + clk_info = + &dclk_table_ast2500[vbios_mode->enh_table->dclk_index]; + else + clk_info = &dclk_table[vbios_mode->enh_table->dclk_index]; + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xc0, 0x00, + clk_info->param1); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xc1, 0x00, + clk_info->param2); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xbb, 0x0f, + (clk_info->param3 & 0xc0) | + ((clk_info->param3 & 0x3) << 4)); +} + +static void ast_set_color_reg(struct ast_private *ast, + const struct drm_format_info *format) +{ + u8 jregA0 = 0, jregA3 = 0, jregA8 = 0; + + switch (format->cpp[0] * 8) { + case 8: + jregA0 = 0x70; + jregA3 = 0x01; + jregA8 = 0x00; + break; + case 15: + case 16: + jregA0 = 0x70; + jregA3 = 0x04; + jregA8 = 0x02; + break; + case 32: + jregA0 = 0x70; + jregA3 = 0x08; + jregA8 = 0x02; + break; + } + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa0, 0x8f, jregA0); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xf0, jregA3); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa8, 0xfd, jregA8); +} + +static void ast_set_crtthd_reg(struct ast_private *ast) +{ + /* Set Threshold */ + if (ast->chip == AST2600) { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0xe0); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0xa0); + } else if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x78); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x60); + } else if (ast->chip == AST2100 || ast->chip == AST1100 || + ast->chip == AST2200 || ast->chip == AST2150) { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x3f); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x2f); + } else { + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa7, 0x2f); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa6, 0x1f); + } +} + +static void ast_set_sync_reg(struct ast_private *ast, + struct drm_display_mode *mode, + struct ast_vbios_mode_info *vbios_mode) +{ + u8 jreg; + + jreg = ast_io_read8(ast, AST_IO_MISC_PORT_READ); + jreg &= ~0xC0; + if (vbios_mode->enh_table->flags & NVSync) + jreg |= 0x80; + if (vbios_mode->enh_table->flags & NHSync) + jreg |= 0x40; + ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, jreg); +} + +static void ast_set_start_address_crt1(struct ast_private *ast, + unsigned int offset) +{ + u32 addr; + + addr = offset >> 2; + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x0d, (u8)(addr & 0xff)); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0x0c, + (u8)((addr >> 8) & 0xff)); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xaf, + (u8)((addr >> 16) & 0xff)); +} + +static void ast_wait_for_vretrace(struct ast_private *ast) +{ + unsigned long timeout = jiffies + HZ; + u8 vgair1; + + do { + vgair1 = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ); + } while (!(vgair1 & AST_IO_VGAIR1_VREFRESH) && + time_before(jiffies, timeout)); +} + +/* + * Primary plane + */ + +static const uint32_t ast_primary_plane_formats[] = { + DRM_FORMAT_XRGB8888, + DRM_FORMAT_RGB565, + DRM_FORMAT_C8, +}; + +static int ast_primary_plane_helper_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_device *dev = plane->dev; + struct drm_plane_state *new_plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_crtc_state *new_crtc_state = NULL; + struct ast_crtc_state *new_ast_crtc_state; + int ret; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state( + state, new_plane_state->crtc); + + ret = drm_atomic_helper_check_plane_state( + new_plane_state, new_crtc_state, DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, false, true); + if (ret) { + return ret; + } else if (!new_plane_state->visible) { + if (drm_WARN_ON( + dev, + new_plane_state->crtc)) /* cannot legally happen */ + return -EINVAL; + else + return 0; + } + + new_ast_crtc_state = to_ast_crtc_state(new_crtc_state); + + new_ast_crtc_state->format = new_plane_state->fb->format; + + return 0; +} + +static void +ast_primary_plane_helper_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_device *dev = plane->dev; + struct ast_private *ast = to_ast_private(dev); + struct drm_plane_state *plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = + drm_atomic_get_old_plane_state(state, plane); + struct drm_framebuffer *old_fb = old_plane_state->fb; + struct drm_gem_vram_object *gbo; + s64 gpu_addr; + + if (!old_fb || (fb->format != old_fb->format)) { + struct drm_crtc *crtc = plane_state->crtc; + struct drm_crtc_state *crtc_state = + drm_atomic_get_new_crtc_state(state, crtc); + struct ast_crtc_state *ast_crtc_state = + to_ast_crtc_state(crtc_state); + struct ast_vbios_mode_info *vbios_mode_info = + &ast_crtc_state->vbios_mode_info; + + ast_set_color_reg(ast, fb->format); + ast_set_vbios_color_reg(ast, fb->format, vbios_mode_info); + } + + gbo = drm_gem_vram_of_gem(fb->obj[0]); + gpu_addr = drm_gem_vram_offset(gbo); + if (drm_WARN_ON_ONCE(dev, gpu_addr < 0)) + return; /* Bug: we didn't pin the BO to VRAM in prepare_fb. */ + + ast_set_offset_reg(ast, fb); + ast_set_start_address_crt1(ast, (u32)gpu_addr); + + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0x00); +} + +static void +ast_primary_plane_helper_atomic_disable(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct ast_private *ast = to_ast_private(plane->dev); + + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x1, 0xdf, 0x20); +} + +static const struct drm_plane_helper_funcs ast_primary_plane_helper_funcs = { + DRM_GEM_VRAM_PLANE_HELPER_FUNCS, + .atomic_check = ast_primary_plane_helper_atomic_check, + .atomic_update = ast_primary_plane_helper_atomic_update, + .atomic_disable = ast_primary_plane_helper_atomic_disable, +}; + +static const struct drm_plane_funcs ast_primary_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = drm_plane_cleanup, + .reset = drm_atomic_helper_plane_reset, + .atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_plane_destroy_state, +}; + +static int ast_primary_plane_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_plane *primary_plane = &ast->primary_plane; + int ret; + + ret = drm_universal_plane_init(dev, primary_plane, 0x01, + &ast_primary_plane_funcs, + ast_primary_plane_formats, + ARRAY_SIZE(ast_primary_plane_formats), + NULL, DRM_PLANE_TYPE_PRIMARY, NULL); + if (ret) { + drm_err(dev, "drm_universal_plane_init() failed: %d\n", ret); + return ret; + } + drm_plane_helper_add(primary_plane, &ast_primary_plane_helper_funcs); + + return 0; +} + +/* + * Cursor plane + */ + +static void ast_update_cursor_image(u8 __iomem *dst, const u8 *src, int width, + int height) +{ + union { + u32 ul; + u8 b[4]; + } srcdata32[2], data32; + union { + u16 us; + u8 b[2]; + } data16; + u32 csum = 0; + s32 alpha_dst_delta, last_alpha_dst_delta; + u8 __iomem *dstxor; + const u8 *srcxor; + int i, j; + u32 per_pixel_copy, two_pixel_copy; + + alpha_dst_delta = AST_MAX_HWC_WIDTH << 1; + last_alpha_dst_delta = alpha_dst_delta - (width << 1); + + srcxor = src; + dstxor = (u8 *)dst + last_alpha_dst_delta + + (AST_MAX_HWC_HEIGHT - height) * alpha_dst_delta; + per_pixel_copy = width & 1; + two_pixel_copy = width >> 1; + + for (j = 0; j < height; j++) { + for (i = 0; i < two_pixel_copy; i++) { + srcdata32[0].ul = *((u32 *)srcxor) & 0xf0f0f0f0; + srcdata32[1].ul = *((u32 *)(srcxor + 4)) & 0xf0f0f0f0; + data32.b[0] = srcdata32[0].b[1] | + (srcdata32[0].b[0] >> 4); + data32.b[1] = srcdata32[0].b[3] | + (srcdata32[0].b[2] >> 4); + data32.b[2] = srcdata32[1].b[1] | + (srcdata32[1].b[0] >> 4); + data32.b[3] = srcdata32[1].b[3] | + (srcdata32[1].b[2] >> 4); + + writel(data32.ul, dstxor); + csum += data32.ul; + + dstxor += 4; + srcxor += 8; + } + + for (i = 0; i < per_pixel_copy; i++) { + srcdata32[0].ul = *((u32 *)srcxor) & 0xf0f0f0f0; + data16.b[0] = srcdata32[0].b[1] | + (srcdata32[0].b[0] >> 4); + data16.b[1] = srcdata32[0].b[3] | + (srcdata32[0].b[2] >> 4); + writew(data16.us, dstxor); + csum += (u32)data16.us; + + dstxor += 2; + srcxor += 4; + } + dstxor += last_alpha_dst_delta; + } + + /* write checksum + signature */ + dst += AST_HWC_SIZE; + writel(csum, dst); + writel(width, dst + AST_HWC_SIGNATURE_SizeX); + writel(height, dst + AST_HWC_SIGNATURE_SizeY); + writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTX); + writel(0, dst + AST_HWC_SIGNATURE_HOTSPOTY); +} + +static void ast_set_cursor_base(struct ast_private *ast, u64 address) +{ + u8 addr0 = (address >> 3) & 0xff; + u8 addr1 = (address >> 11) & 0xff; + u8 addr2 = (address >> 19) & 0xff; + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc8, addr0); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc9, addr1); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xca, addr2); +} + +static void ast_set_cursor_location(struct ast_private *ast, u16 x, u16 y, + u8 x_offset, u8 y_offset) +{ + u8 x0 = (x & 0x00ff); + u8 x1 = (x & 0x0f00) >> 8; + u8 y0 = (y & 0x00ff); + u8 y1 = (y & 0x0700) >> 8; + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc2, x_offset); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc3, y_offset); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc4, x0); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc5, x1); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc6, y0); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xc7, y1); +} + +static void ast_set_cursor_enabled(struct ast_private *ast, bool enabled) +{ + static const u8 mask = + (u8) ~(AST_IO_VGACRCB_HWC_16BPP | AST_IO_VGACRCB_HWC_ENABLED); + + u8 vgacrcb = AST_IO_VGACRCB_HWC_16BPP; + + if (enabled) + vgacrcb |= AST_IO_VGACRCB_HWC_ENABLED; + + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xcb, mask, vgacrcb); +} + +static const uint32_t ast_cursor_plane_formats[] = { + DRM_FORMAT_ARGB8888, +}; + +static int ast_cursor_plane_helper_atomic_check(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct drm_plane_state *new_plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_framebuffer *new_fb = new_plane_state->fb; + struct drm_crtc_state *new_crtc_state = NULL; + int ret; + + if (new_plane_state->crtc) + new_crtc_state = drm_atomic_get_new_crtc_state( + state, new_plane_state->crtc); + + ret = drm_atomic_helper_check_plane_state( + new_plane_state, new_crtc_state, DRM_PLANE_NO_SCALING, + DRM_PLANE_NO_SCALING, true, true); + if (ret || !new_plane_state->visible) + return ret; + + if (new_fb->width > AST_MAX_HWC_WIDTH || + new_fb->height > AST_MAX_HWC_HEIGHT) + return -EINVAL; + + return 0; +} + +static void +ast_cursor_plane_helper_atomic_update(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct ast_plane *ast_plane = to_ast_plane(plane); + struct drm_plane_state *plane_state = + drm_atomic_get_new_plane_state(state, plane); + struct drm_shadow_plane_state *shadow_plane_state = + to_drm_shadow_plane_state(plane_state); + struct drm_framebuffer *fb = plane_state->fb; + struct drm_plane_state *old_plane_state = + drm_atomic_get_old_plane_state(state, plane); + struct drm_framebuffer *old_fb = old_plane_state->fb; + struct ast_private *ast = to_ast_private(plane->dev); + struct iosys_map dst_map = ast_plane->map; + u64 dst_off = ast_plane->off; + struct iosys_map src_map = shadow_plane_state->data[0]; + unsigned int offset_x, offset_y; + u16 x, y; + u8 x_offset, y_offset; + u8 __iomem *dst; + u8 __iomem *sig; + const u8 *src; + + src = src_map.vaddr; /* TODO: Use mapping abstraction properly */ + dst = dst_map.vaddr_iomem; /* TODO: Use mapping abstraction properly */ + sig = dst + AST_HWC_SIZE; /* TODO: Use mapping abstraction properly */ + + /* + * Do data transfer to HW cursor BO. If a new cursor image was installed, + * point the scanout engine to dst_gbo's offset and page-flip the HWC buffers. + */ + + ast_update_cursor_image(dst, src, fb->width, fb->height); + + if (fb != old_fb) + ast_set_cursor_base(ast, dst_off); + + /* + * Update location in HWC signature and registers. + */ + + writel(plane_state->crtc_x, sig + AST_HWC_SIGNATURE_X); + writel(plane_state->crtc_y, sig + AST_HWC_SIGNATURE_Y); + + offset_x = AST_MAX_HWC_WIDTH - fb->width; + offset_y = AST_MAX_HWC_HEIGHT - fb->height; + + if (plane_state->crtc_x < 0) { + x_offset = (-plane_state->crtc_x) + offset_x; + x = 0; + } else { + x_offset = offset_x; + x = plane_state->crtc_x; + } + if (plane_state->crtc_y < 0) { + y_offset = (-plane_state->crtc_y) + offset_y; + y = 0; + } else { + y_offset = offset_y; + y = plane_state->crtc_y; + } + + ast_set_cursor_location(ast, x, y, x_offset, y_offset); + + /* Dummy write to enable HWC and make the HW pick-up the changes. */ + ast_set_cursor_enabled(ast, true); +} + +static void +ast_cursor_plane_helper_atomic_disable(struct drm_plane *plane, + struct drm_atomic_state *state) +{ + struct ast_private *ast = to_ast_private(plane->dev); + + ast_set_cursor_enabled(ast, false); +} + +static const struct drm_plane_helper_funcs ast_cursor_plane_helper_funcs = { + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS, + .atomic_check = ast_cursor_plane_helper_atomic_check, + .atomic_update = ast_cursor_plane_helper_atomic_update, + .atomic_disable = ast_cursor_plane_helper_atomic_disable, +}; + +static void ast_cursor_plane_destroy(struct drm_plane *plane) +{ + struct ast_plane *ast_plane = to_ast_plane(plane); + struct drm_gem_vram_object *gbo = ast_plane->gbo; + struct iosys_map map = ast_plane->map; + + drm_gem_vram_vunmap(gbo, &map); + drm_gem_vram_unpin(gbo); + drm_gem_vram_put(gbo); + + drm_plane_cleanup(plane); +} + +static const struct drm_plane_funcs ast_cursor_plane_funcs = { + .update_plane = drm_atomic_helper_update_plane, + .disable_plane = drm_atomic_helper_disable_plane, + .destroy = ast_cursor_plane_destroy, + DRM_GEM_SHADOW_PLANE_FUNCS, +}; + +static int ast_cursor_plane_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct ast_plane *ast_plane = &ast->cursor_plane; + struct drm_plane *cursor_plane = &ast_plane->base; + size_t size; + struct drm_gem_vram_object *gbo; + struct iosys_map map; + int ret; + s64 off; + + /* + * Allocate backing storage for cursors. The BOs are permanently + * pinned to the top end of the VRAM. + */ + + size = roundup(AST_HWC_SIZE + AST_HWC_SIGNATURE_SIZE, PAGE_SIZE); + + gbo = drm_gem_vram_create(dev, size, 0); + if (IS_ERR(gbo)) + return PTR_ERR(gbo); + + ret = drm_gem_vram_pin(gbo, DRM_GEM_VRAM_PL_FLAG_VRAM | + DRM_GEM_VRAM_PL_FLAG_TOPDOWN); + if (ret) + goto err_drm_gem_vram_put; + ret = drm_gem_vram_vmap(gbo, &map); + if (ret) + goto err_drm_gem_vram_unpin; + off = drm_gem_vram_offset(gbo); + if (off < 0) { + ret = off; + goto err_drm_gem_vram_vunmap; + } + + ast_plane->gbo = gbo; + ast_plane->map = map; + ast_plane->off = off; + + /* + * Create the cursor plane. The plane's destroy callback will release + * the backing storages' BO memory. + */ + + ret = drm_universal_plane_init(dev, cursor_plane, 0x01, + &ast_cursor_plane_funcs, + ast_cursor_plane_formats, + ARRAY_SIZE(ast_cursor_plane_formats), + NULL, DRM_PLANE_TYPE_CURSOR, NULL); + if (ret) { + drm_err(dev, "drm_universal_plane failed(): %d\n", ret); + goto err_drm_gem_vram_vunmap; + } + drm_plane_helper_add(cursor_plane, &ast_cursor_plane_helper_funcs); + + return 0; + +err_drm_gem_vram_vunmap: + drm_gem_vram_vunmap(gbo, &map); +err_drm_gem_vram_unpin: + drm_gem_vram_unpin(gbo); +err_drm_gem_vram_put: + drm_gem_vram_put(gbo); + return ret; +} + +/* + * CRTC + */ + +static void ast_crtc_dpms(struct drm_crtc *crtc, int mode) +{ + struct ast_private *ast = to_ast_private(crtc->dev); + u8 ch = AST_DPMS_VSYNC_OFF | AST_DPMS_HSYNC_OFF; + struct ast_crtc_state *ast_state; + const struct drm_format_info *format; + struct ast_vbios_mode_info *vbios_mode_info; + + /* TODO: Maybe control display signal generation with + * Sync Enable (bit CR17.7). + */ + switch (mode) { + case DRM_MODE_DPMS_ON: + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, 0); + if (ast->tx_chip_types & AST_TX_DP501_BIT) + ast_set_dp501_video_output(crtc->dev, 1); + + if (ast->tx_chip_types & AST_TX_ASTDP_BIT) { + ast_dp_power_on_off(crtc->dev, AST_DP_POWER_ON); + ast_wait_for_vretrace(ast); + ast_dp_set_on_off(crtc->dev, 1); + } + + ast_state = to_ast_crtc_state(crtc->state); + format = ast_state->format; + + if (format) { + vbios_mode_info = &ast_state->vbios_mode_info; + + ast_set_color_reg(ast, format); + ast_set_vbios_color_reg(ast, format, vbios_mode_info); + if (crtc->state->gamma_lut) + ast_crtc_set_gamma( + ast, format, + crtc->state->gamma_lut->data); + else + ast_crtc_set_gamma_linear(ast, format); + } + break; + case DRM_MODE_DPMS_STANDBY: + case DRM_MODE_DPMS_SUSPEND: + case DRM_MODE_DPMS_OFF: + ch = mode; + if (ast->tx_chip_types & AST_TX_DP501_BIT) + ast_set_dp501_video_output(crtc->dev, 0); + + if (ast->tx_chip_types & AST_TX_ASTDP_BIT) { + ast_dp_set_on_off(crtc->dev, 0); + ast_dp_power_on_off(crtc->dev, AST_DP_POWER_OFF); + } + + ast_set_index_reg_mask(ast, AST_IO_SEQ_PORT, 0x01, 0xdf, 0x20); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xfc, ch); + break; + } +} + +static enum drm_mode_status +ast_crtc_helper_mode_valid(struct drm_crtc *crtc, + const struct drm_display_mode *mode) +{ + struct ast_private *ast = to_ast_private(crtc->dev); + enum drm_mode_status status; + uint32_t jtemp; + + if (ast->support_wide_screen) { + if ((mode->hdisplay == 1680) && (mode->vdisplay == 1050)) + return MODE_OK; + if ((mode->hdisplay == 1280) && (mode->vdisplay == 800)) + return MODE_OK; + if ((mode->hdisplay == 1440) && (mode->vdisplay == 900)) + return MODE_OK; + if ((mode->hdisplay == 1360) && (mode->vdisplay == 768)) + return MODE_OK; + if ((mode->hdisplay == 1600) && (mode->vdisplay == 900)) + return MODE_OK; + if ((mode->hdisplay == 1152) && (mode->vdisplay == 864)) + return MODE_OK; + + if ((ast->chip == AST2100) || (ast->chip == AST2200) || + (ast->chip == AST2300) || (ast->chip == AST2400) || + (ast->chip == AST2500) || (ast->chip == AST2600)) { + if ((mode->hdisplay == 1920) && + (mode->vdisplay == 1080)) + return MODE_OK; + + if ((mode->hdisplay == 1920) && + (mode->vdisplay == 1200)) { + jtemp = ast_get_index_reg_mask( + ast, AST_IO_CRTC_PORT, 0xd1, 0xff); + if (jtemp & 0x01) + return MODE_NOMODE; + else + return MODE_OK; + } + } + } + + status = MODE_NOMODE; + + switch (mode->hdisplay) { + case 640: + if (mode->vdisplay == 480) + status = MODE_OK; + break; + case 800: + if (mode->vdisplay == 600) + status = MODE_OK; + break; + case 1024: + if (mode->vdisplay == 768) + status = MODE_OK; + break; + case 1152: + if (mode->vdisplay == 864) + status = MODE_OK; + break; + case 1280: + if (mode->vdisplay == 1024) + status = MODE_OK; + break; + case 1600: + if (mode->vdisplay == 1200) + status = MODE_OK; + break; + default: + break; + } + + return status; +} + +static int ast_crtc_helper_atomic_check(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *crtc_state = + drm_atomic_get_new_crtc_state(state, crtc); + struct drm_crtc_state *old_crtc_state = + drm_atomic_get_old_crtc_state(state, crtc); + struct ast_crtc_state *old_ast_crtc_state = + to_ast_crtc_state(old_crtc_state); + struct drm_device *dev = crtc->dev; + struct ast_crtc_state *ast_state; + const struct drm_format_info *format; + bool succ; + int ret; + + if (!crtc_state->enable) + return 0; + + ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state); + if (ret) + return ret; + + ast_state = to_ast_crtc_state(crtc_state); + + format = ast_state->format; + if (drm_WARN_ON_ONCE(dev, !format)) + return -EINVAL; /* BUG: We didn't set format in primary check(). */ + + /* + * The gamma LUT has to be reloaded after changing the primary + * plane's color format. + */ + if (old_ast_crtc_state->format != format) + crtc_state->color_mgmt_changed = true; + + if (crtc_state->color_mgmt_changed && crtc_state->gamma_lut) { + if (crtc_state->gamma_lut->length != + AST_LUT_SIZE * sizeof(struct drm_color_lut)) { + drm_err(dev, "Wrong size for gamma_lut %zu\n", + crtc_state->gamma_lut->length); + return -EINVAL; + } + } + + succ = ast_get_vbios_mode_info(format, &crtc_state->mode, + &crtc_state->adjusted_mode, + &ast_state->vbios_mode_info); + if (!succ) + return -EINVAL; + + return 0; +} + +static void ast_crtc_helper_atomic_flush(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *crtc_state = + drm_atomic_get_new_crtc_state(state, crtc); + struct drm_device *dev = crtc->dev; + struct ast_private *ast = to_ast_private(dev); + struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state); + struct ast_vbios_mode_info *vbios_mode_info = + &ast_crtc_state->vbios_mode_info; + + /* + * The gamma LUT has to be reloaded after changing the primary + * plane's color format. + */ + if (crtc_state->enable && crtc_state->color_mgmt_changed) { + if (crtc_state->gamma_lut) + ast_crtc_set_gamma(ast, ast_crtc_state->format, + crtc_state->gamma_lut->data); + else + ast_crtc_set_gamma_linear(ast, ast_crtc_state->format); + } + + //Set Aspeed Display-Port + if (ast->tx_chip_types & AST_TX_ASTDP_BIT) + ast_dp_set_mode(crtc, vbios_mode_info); +} + +static void ast_crtc_helper_atomic_enable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_device *dev = crtc->dev; + struct ast_private *ast = to_ast_private(dev); + struct drm_crtc_state *crtc_state = + drm_atomic_get_new_crtc_state(state, crtc); + struct ast_crtc_state *ast_crtc_state = to_ast_crtc_state(crtc_state); + struct ast_vbios_mode_info *vbios_mode_info = + &ast_crtc_state->vbios_mode_info; + struct drm_display_mode *adjusted_mode = &crtc_state->adjusted_mode; + + ast_set_vbios_mode_reg(ast, adjusted_mode, vbios_mode_info); + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06); + ast_set_std_reg(ast, adjusted_mode, vbios_mode_info); + ast_set_crtc_reg(ast, adjusted_mode, vbios_mode_info); + ast_set_dclk_reg(ast, adjusted_mode, vbios_mode_info); + ast_set_crtthd_reg(ast); + ast_set_sync_reg(ast, adjusted_mode, vbios_mode_info); + + ast_crtc_dpms(crtc, DRM_MODE_DPMS_ON); +} + +static void ast_crtc_helper_atomic_disable(struct drm_crtc *crtc, + struct drm_atomic_state *state) +{ + struct drm_crtc_state *old_crtc_state = + drm_atomic_get_old_crtc_state(state, crtc); + struct drm_device *dev = crtc->dev; + struct ast_private *ast = to_ast_private(dev); + + ast_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); + + /* + * HW cursors require the underlying primary plane and CRTC to + * display a valid mode and image. This is not the case during + * full modeset operations. So we temporarily disable any active + * plane, including the HW cursor. Each plane's atomic_update() + * helper will re-enable it if necessary. + * + * We only do this during *full* modesets. It does not affect + * simple pageflips on the planes. + */ + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, false); + + /* + * Ensure that no scanout takes place before reprogramming mode + * and format registers. + */ + ast_wait_for_vretrace(ast); +} + +static const struct drm_crtc_helper_funcs ast_crtc_helper_funcs = { + .mode_valid = ast_crtc_helper_mode_valid, + .atomic_check = ast_crtc_helper_atomic_check, + .atomic_flush = ast_crtc_helper_atomic_flush, + .atomic_enable = ast_crtc_helper_atomic_enable, + .atomic_disable = ast_crtc_helper_atomic_disable, +}; + +static void ast_crtc_reset(struct drm_crtc *crtc) +{ + struct ast_crtc_state *ast_state = + kzalloc(sizeof(*ast_state), GFP_KERNEL); + + if (crtc->state) + crtc->funcs->atomic_destroy_state(crtc, crtc->state); + + if (ast_state) + __drm_atomic_helper_crtc_reset(crtc, &ast_state->base); + else + __drm_atomic_helper_crtc_reset(crtc, NULL); +} + +static struct drm_crtc_state * +ast_crtc_atomic_duplicate_state(struct drm_crtc *crtc) +{ + struct ast_crtc_state *new_ast_state, *ast_state; + struct drm_device *dev = crtc->dev; + + if (drm_WARN_ON(dev, !crtc->state)) + return NULL; + + new_ast_state = kmalloc(sizeof(*new_ast_state), GFP_KERNEL); + if (!new_ast_state) + return NULL; + __drm_atomic_helper_crtc_duplicate_state(crtc, &new_ast_state->base); + + ast_state = to_ast_crtc_state(crtc->state); + + new_ast_state->format = ast_state->format; + memcpy(&new_ast_state->vbios_mode_info, &ast_state->vbios_mode_info, + sizeof(new_ast_state->vbios_mode_info)); + + return &new_ast_state->base; +} + +static void ast_crtc_atomic_destroy_state(struct drm_crtc *crtc, + struct drm_crtc_state *state) +{ + struct ast_crtc_state *ast_state = to_ast_crtc_state(state); + + __drm_atomic_helper_crtc_destroy_state(&ast_state->base); + kfree(ast_state); +} + +static const struct drm_crtc_funcs ast_crtc_funcs = { + .reset = ast_crtc_reset, + .destroy = drm_crtc_cleanup, + .set_config = drm_atomic_helper_set_config, + .page_flip = drm_atomic_helper_page_flip, + .atomic_duplicate_state = ast_crtc_atomic_duplicate_state, + .atomic_destroy_state = ast_crtc_atomic_destroy_state, +}; + +static int ast_crtc_init(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + struct drm_crtc *crtc = &ast->crtc; + int ret; + + ret = drm_crtc_init_with_planes(dev, crtc, &ast->primary_plane, + &ast->cursor_plane.base, + &ast_crtc_funcs, NULL); + if (ret) + return ret; + + drm_mode_crtc_set_gamma_size(crtc, AST_LUT_SIZE); + drm_crtc_enable_color_mgmt(crtc, 0, false, AST_LUT_SIZE); + + drm_crtc_helper_add(crtc, &ast_crtc_helper_funcs); + + return 0; +} + +/* + * VGA Connector + */ + +static int ast_vga_connector_helper_get_modes(struct drm_connector *connector) +{ + struct ast_vga_connector *ast_vga_connector = + to_ast_vga_connector(connector); + struct drm_device *dev = connector->dev; + struct ast_private *ast = to_ast_private(dev); + struct edid *edid; + int count; + + if (!ast_vga_connector->i2c) + goto err_drm_connector_update_edid_property; + + /* + * Protect access to I/O registers from concurrent modesetting + * by acquiring the I/O-register lock. + */ + mutex_lock(&ast->ioregs_lock); + + edid = drm_get_edid(connector, &ast_vga_connector->i2c->adapter); + if (!edid) + goto err_mutex_unlock; + + mutex_unlock(&ast->ioregs_lock); + + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; + +err_mutex_unlock: + mutex_unlock(&ast->ioregs_lock); +err_drm_connector_update_edid_property: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static const struct drm_connector_helper_funcs ast_vga_connector_helper_funcs = { + .get_modes = ast_vga_connector_helper_get_modes, +}; + +static const struct drm_connector_funcs ast_vga_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_vga_connector_init(struct drm_device *dev, + struct ast_vga_connector *ast_vga_connector) +{ + struct drm_connector *connector = &ast_vga_connector->base; + int ret; + + ast_vga_connector->i2c = ast_i2c_create(dev); + if (!ast_vga_connector->i2c) + drm_err(dev, "failed to add ddc bus for connector\n"); + + if (ast_vga_connector->i2c) + ret = drm_connector_init_with_ddc( + dev, connector, &ast_vga_connector_funcs, + DRM_MODE_CONNECTOR_VGA, + &ast_vga_connector->i2c->adapter); + else + ret = drm_connector_init(dev, connector, + &ast_vga_connector_funcs, + DRM_MODE_CONNECTOR_VGA); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_vga_connector_helper_funcs); + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + connector->polled = DRM_CONNECTOR_POLL_CONNECT; + + return 0; +} + +static int ast_vga_output_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_crtc *crtc = &ast->crtc; + struct drm_encoder *encoder = &ast->output.vga.encoder; + struct ast_vga_connector *ast_vga_connector = + &ast->output.vga.vga_connector; + struct drm_connector *connector = &ast_vga_connector->base; + int ret; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_DAC); + if (ret) + return ret; + encoder->possible_crtcs = drm_crtc_mask(crtc); + + ret = ast_vga_connector_init(dev, ast_vga_connector); + if (ret) + return ret; + + ret = drm_connector_attach_encoder(connector, encoder); + if (ret) + return ret; + + return 0; +} + +/* + * SIL164 Connector + */ + +static int +ast_sil164_connector_helper_get_modes(struct drm_connector *connector) +{ + struct ast_sil164_connector *ast_sil164_connector = + to_ast_sil164_connector(connector); + struct drm_device *dev = connector->dev; + struct ast_private *ast = to_ast_private(dev); + struct edid *edid; + int count; + + if (!ast_sil164_connector->i2c) + goto err_drm_connector_update_edid_property; + + /* + * Protect access to I/O registers from concurrent modesetting + * by acquiring the I/O-register lock. + */ + mutex_lock(&ast->ioregs_lock); + + edid = drm_get_edid(connector, &ast_sil164_connector->i2c->adapter); + if (!edid) + goto err_mutex_unlock; + + mutex_unlock(&ast->ioregs_lock); + + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; + +err_mutex_unlock: + mutex_unlock(&ast->ioregs_lock); +err_drm_connector_update_edid_property: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static const struct drm_connector_helper_funcs + ast_sil164_connector_helper_funcs = { + .get_modes = ast_sil164_connector_helper_get_modes, + }; + +static const struct drm_connector_funcs ast_sil164_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int +ast_sil164_connector_init(struct drm_device *dev, + struct ast_sil164_connector *ast_sil164_connector) +{ + struct drm_connector *connector = &ast_sil164_connector->base; + int ret; + + ast_sil164_connector->i2c = ast_i2c_create(dev); + if (!ast_sil164_connector->i2c) + drm_err(dev, "failed to add ddc bus for connector\n"); + + if (ast_sil164_connector->i2c) + ret = drm_connector_init_with_ddc( + dev, connector, &ast_sil164_connector_funcs, + DRM_MODE_CONNECTOR_DVII, + &ast_sil164_connector->i2c->adapter); + else + ret = drm_connector_init(dev, connector, + &ast_sil164_connector_funcs, + DRM_MODE_CONNECTOR_DVII); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_sil164_connector_helper_funcs); + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + connector->polled = DRM_CONNECTOR_POLL_CONNECT; + + return 0; +} + +static int ast_sil164_output_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_crtc *crtc = &ast->crtc; + struct drm_encoder *encoder = &ast->output.sil164.encoder; + struct ast_sil164_connector *ast_sil164_connector = + &ast->output.sil164.sil164_connector; + struct drm_connector *connector = &ast_sil164_connector->base; + int ret; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS); + if (ret) + return ret; + encoder->possible_crtcs = drm_crtc_mask(crtc); + + ret = ast_sil164_connector_init(dev, ast_sil164_connector); + if (ret) + return ret; + + ret = drm_connector_attach_encoder(connector, encoder); + if (ret) + return ret; + + return 0; +} + +/* + * DP501 Connector + */ + +static int ast_dp501_connector_helper_get_modes(struct drm_connector *connector) +{ + void *edid; + bool succ; + int count; + + edid = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!edid) + goto err_drm_connector_update_edid_property; + + succ = ast_dp501_read_edid(connector->dev, edid); + if (!succ) + goto err_kfree; + + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; + +err_kfree: + kfree(edid); +err_drm_connector_update_edid_property: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static const struct drm_connector_helper_funcs + ast_dp501_connector_helper_funcs = { + .get_modes = ast_dp501_connector_helper_get_modes, + }; + +static const struct drm_connector_funcs ast_dp501_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_dp501_connector_init(struct drm_device *dev, + struct drm_connector *connector) +{ + int ret; + + ret = drm_connector_init(dev, connector, &ast_dp501_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_dp501_connector_helper_funcs); + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + connector->polled = DRM_CONNECTOR_POLL_CONNECT; + + return 0; +} + +static int ast_dp501_output_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_crtc *crtc = &ast->crtc; + struct drm_encoder *encoder = &ast->output.dp501.encoder; + struct drm_connector *connector = &ast->output.dp501.connector; + int ret; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS); + if (ret) + return ret; + encoder->possible_crtcs = drm_crtc_mask(crtc); + + ret = ast_dp501_connector_init(dev, connector); + if (ret) + return ret; + + ret = drm_connector_attach_encoder(connector, encoder); + if (ret) + return ret; + + return 0; +} + +/* + * ASPEED Display-Port Connector + */ + +static int ast_astdp_connector_helper_get_modes(struct drm_connector *connector) +{ + void *edid; + + int succ; + int count; + + edid = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!edid) + goto err_drm_connector_update_edid_property; + + succ = ast_astdp_read_edid(connector->dev, edid); + if (succ < 0) + goto err_kfree; + + drm_connector_update_edid_property(connector, edid); + count = drm_add_edid_modes(connector, edid); + kfree(edid); + + return count; + +err_kfree: + kfree(edid); +err_drm_connector_update_edid_property: + drm_connector_update_edid_property(connector, NULL); + return 0; +} + +static const struct drm_connector_helper_funcs + ast_astdp_connector_helper_funcs = { + .get_modes = ast_astdp_connector_helper_get_modes, + }; + +static const struct drm_connector_funcs ast_astdp_connector_funcs = { + .reset = drm_atomic_helper_connector_reset, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ast_astdp_connector_init(struct drm_device *dev, + struct drm_connector *connector) +{ + int ret; + + ret = drm_connector_init(dev, connector, &ast_astdp_connector_funcs, + DRM_MODE_CONNECTOR_DisplayPort); + if (ret) + return ret; + + drm_connector_helper_add(connector, &ast_astdp_connector_helper_funcs); + + connector->interlace_allowed = 0; + connector->doublescan_allowed = 0; + + connector->polled = DRM_CONNECTOR_POLL_CONNECT; + + return 0; +} + +static int ast_astdp_output_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + struct drm_crtc *crtc = &ast->crtc; + struct drm_encoder *encoder = &ast->output.astdp.encoder; + struct drm_connector *connector = &ast->output.astdp.connector; + int ret; + + ret = drm_simple_encoder_init(dev, encoder, DRM_MODE_ENCODER_TMDS); + if (ret) + return ret; + encoder->possible_crtcs = drm_crtc_mask(crtc); + + ret = ast_astdp_connector_init(dev, connector); + if (ret) + return ret; + + ret = drm_connector_attach_encoder(connector, encoder); + if (ret) + return ret; + + return 0; +} + +/* + * Mode config + */ + +static void +ast_mode_config_helper_atomic_commit_tail(struct drm_atomic_state *state) +{ + struct ast_private *ast = to_ast_private(state->dev); + + /* + * Concurrent operations could possibly trigger a call to + * drm_connector_helper_funcs.get_modes by trying to read the + * display modes. Protect access to I/O registers by acquiring + * the I/O-register lock. Released in atomic_flush(). + */ + mutex_lock(&ast->ioregs_lock); + drm_atomic_helper_commit_tail_rpm(state); + mutex_unlock(&ast->ioregs_lock); +} + +static const struct drm_mode_config_helper_funcs ast_mode_config_helper_funcs = { + .atomic_commit_tail = ast_mode_config_helper_atomic_commit_tail, +}; + +static const struct drm_mode_config_funcs ast_mode_config_funcs = { + .fb_create = drm_gem_fb_create, + .mode_valid = drm_vram_helper_mode_valid, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +int ast_mode_config_init(struct ast_private *ast) +{ + struct drm_device *dev = &ast->base; + int ret; + + ret = drmm_mode_config_init(dev); + if (ret) + return ret; + + dev->mode_config.funcs = &ast_mode_config_funcs; + dev->mode_config.min_width = 0; + dev->mode_config.min_height = 0; + dev->mode_config.preferred_depth = 24; + dev->mode_config.prefer_shadow = 1; + + if (ast->chip == AST2100 || ast->chip == AST2200 || + ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500 || ast->chip == AST2600) { + dev->mode_config.max_width = 1920; + dev->mode_config.max_height = 2048; + } else { + dev->mode_config.max_width = 1600; + dev->mode_config.max_height = 1200; + } + + dev->mode_config.helper_private = &ast_mode_config_helper_funcs; + + ret = ast_primary_plane_init(ast); + if (ret) + return ret; + + ret = ast_cursor_plane_init(ast); + if (ret) + return ret; + + ast_crtc_init(dev); + + if (ast->tx_chip_types & AST_TX_NONE_BIT) { + ret = ast_vga_output_init(ast); + if (ret) + return ret; + } + if (ast->tx_chip_types & AST_TX_SIL164_BIT) { + ret = ast_sil164_output_init(ast); + if (ret) + return ret; + } + if (ast->tx_chip_types & AST_TX_DP501_BIT) { + ret = ast_dp501_output_init(ast); + if (ret) + return ret; + } + if (ast->tx_chip_types & AST_TX_ASTDP_BIT) { + ret = ast_astdp_output_init(ast); + if (ret) + return ret; + } + + drm_mode_config_reset(dev); + + return 0; +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_post.c b/drivers/gpu/drm/loongson/ast_old/ast_post.c new file mode 100644 index 000000000000..a7a9c37dfeee --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_post.c @@ -0,0 +1,2090 @@ +/* + * Copyright 2012 Red Hat Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the + * "Software"), to deal in the Software without restriction, including + * without limitation the rights to use, copy, modify, merge, publish, + * distribute, sub license, and/or sell copies of the Software, and to + * permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE + * USE OR OTHER DEALINGS IN THE SOFTWARE. + * + * The above copyright notice and this permission notice (including the + * next paragraph) shall be included in all copies or substantial portions + * of the Software. + * + */ +/* + * Authors: Dave Airlie <airlied(a)redhat.com> + */ + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_print.h> + +#include "ast_dram_tables.h" +#include "ast_drv.h" + +static void ast_post_chip_2300(struct drm_device *dev); +static void ast_post_chip_2500(struct drm_device *dev); + +void ast_enable_vga(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + + ast_io_write8(ast, AST_IO_VGA_ENABLE_PORT, 0x01); + ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, 0x01); +} + +void ast_enable_mmio(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + + ast_set_index_reg(ast, AST_IO_CRTC_PORT, 0xa1, 0x06); +} + +bool ast_is_vga_enabled(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u8 ch; + + ch = ast_io_read8(ast, AST_IO_VGA_ENABLE_PORT); + + return !!(ch & 0x01); +} + +static const u8 extreginfo[] = { 0x0f, 0x04, 0x1c, 0xff }; +static const u8 extreginfo_ast2300a0[] = { 0x0f, 0x04, 0x1c, 0xff }; +static const u8 extreginfo_ast2300[] = { 0x0f, 0x04, 0x1f, 0xff }; + +static void ast_set_def_ext_reg(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + u8 i, index, reg; + const u8 *ext_reg_info; + + /* reset scratch */ + for (i = 0x81; i <= 0x9f; i++) + ast_set_index_reg(ast, AST_IO_CRTC_PORT, i, 0x00); + + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) { + if (pdev->revision >= 0x20) + ext_reg_info = extreginfo_ast2300; + else + ext_reg_info = extreginfo_ast2300a0; + } else + ext_reg_info = extreginfo; + + index = 0xa0; + while (*ext_reg_info != 0xff) { + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, index, 0x00, + *ext_reg_info); + index++; + ext_reg_info++; + } + + /* disable standard IO/MEM decode if secondary */ + /* ast_set_index_reg-mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x3); */ + + /* Set Ext. Default */ + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0x8c, 0x00, 0x01); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x00, 0x00); + + /* Enable RAMDAC for A1 */ + reg = 0x04; + if (ast->chip == AST2300 || ast->chip == AST2400 || + ast->chip == AST2500) + reg |= 0x20; + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff, reg); +} + +u32 ast_mindwm(struct ast_private *ast, u32 r) +{ + uint32_t data; + + ast_write32(ast, 0xf004, r & 0xffff0000); + ast_write32(ast, 0xf000, 0x1); + + do { + data = ast_read32(ast, 0xf004) & 0xffff0000; + } while (data != (r & 0xffff0000)); + return ast_read32(ast, 0x10000 + (r & 0x0000ffff)); +} + +void ast_moutdwm(struct ast_private *ast, u32 r, u32 v) +{ + uint32_t data; + + ast_write32(ast, 0xf004, r & 0xffff0000); + ast_write32(ast, 0xf000, 0x1); + do { + data = ast_read32(ast, 0xf004) & 0xffff0000; + } while (data != (r & 0xffff0000)); + ast_write32(ast, 0x10000 + (r & 0x0000ffff), v); +} + +/* + * AST2100/2150 DLL CBR Setting + */ +#define CBR_SIZE_AST2150 ((16 << 10) - 1) +#define CBR_PASSNUM_AST2150 5 +#define CBR_THRESHOLD_AST2150 10 +#define CBR_THRESHOLD2_AST2150 10 +#define TIMEOUT_AST2150 5000000 + +#define CBR_PATNUM_AST2150 8 + +static const u32 pattern_AST2150[14] = { 0xFF00FF00, 0xCC33CC33, 0xAA55AA55, + 0xFFFE0001, 0x683501FE, 0x0F1929B0, + 0x2D0B4346, 0x60767F02, 0x6FBE36A6, + 0x3A253035, 0x3019686D, 0x41C6167E, + 0x620152BF, 0x20F050E0 }; + +static u32 mmctestburst2_ast2150(struct ast_private *ast, u32 datagen) +{ + u32 data, timeout; + + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + ast_moutdwm(ast, 0x1e6e0070, 0x00000001 | (datagen << 3)); + timeout = 0; + do { + data = ast_mindwm(ast, 0x1e6e0070) & 0x40; + if (++timeout > TIMEOUT_AST2150) { + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return 0xffffffff; + } + } while (!data); + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + ast_moutdwm(ast, 0x1e6e0070, 0x00000003 | (datagen << 3)); + timeout = 0; + do { + data = ast_mindwm(ast, 0x1e6e0070) & 0x40; + if (++timeout > TIMEOUT_AST2150) { + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return 0xffffffff; + } + } while (!data); + data = (ast_mindwm(ast, 0x1e6e0070) & 0x80) >> 7; + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return data; +} + +static int cbrtest_ast2150(struct ast_private *ast) +{ + int i; + + for (i = 0; i < 8; i++) + if (mmctestburst2_ast2150(ast, i)) + return 0; + return 1; +} + +static int cbrscan_ast2150(struct ast_private *ast, int busw) +{ + u32 patcnt, loop; + + for (patcnt = 0; patcnt < CBR_PATNUM_AST2150; patcnt++) { + ast_moutdwm(ast, 0x1e6e007c, pattern_AST2150[patcnt]); + for (loop = 0; loop < CBR_PASSNUM_AST2150; loop++) { + if (cbrtest_ast2150(ast)) + break; + } + if (loop == CBR_PASSNUM_AST2150) + return 0; + } + return 1; +} + +static void cbrdlli_ast2150(struct ast_private *ast, int busw) +{ + u32 dll_min[4], dll_max[4], dlli, data, passcnt; + +cbr_start: + dll_min[0] = dll_min[1] = dll_min[2] = dll_min[3] = 0xff; + dll_max[0] = dll_max[1] = dll_max[2] = dll_max[3] = 0x0; + passcnt = 0; + + for (dlli = 0; dlli < 100; dlli++) { + ast_moutdwm(ast, 0x1e6e0068, + dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); + data = cbrscan_ast2150(ast, busw); + if (data != 0) { + if (data & 0x1) { + if (dll_min[0] > dlli) + dll_min[0] = dlli; + if (dll_max[0] < dlli) + dll_max[0] = dlli; + } + passcnt++; + } else if (passcnt >= CBR_THRESHOLD_AST2150) + goto cbr_start; + } + if (dll_max[0] == 0 || + (dll_max[0] - dll_min[0]) < CBR_THRESHOLD_AST2150) + goto cbr_start; + + dlli = dll_min[0] + (((dll_max[0] - dll_min[0]) * 7) >> 4); + ast_moutdwm(ast, 0x1e6e0068, + dlli | (dlli << 8) | (dlli << 16) | (dlli << 24)); +} + +static void ast_init_dram_reg(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u8 j; + u32 data, temp, i; + const struct ast_dramstruct *dram_reg_info; + + j = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + + if ((j & 0x80) == 0) { /* VGA only */ + if (ast->chip == AST2000) { + dram_reg_info = ast2000_dram_table_data; + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x10100, 0xa8); + + do { + ; + } while (ast_read32(ast, 0x10100) != 0xa8); + } else { /* AST2100/1100 */ + if (ast->chip == AST2100 || ast->chip == 2200) + dram_reg_info = ast2100_dram_table_data; + else + dram_reg_info = ast1100_dram_table_data; + + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x12000, 0x1688A8A8); + do { + ; + } while (ast_read32(ast, 0x12000) != 0x01); + + ast_write32(ast, 0x10000, 0xfc600309); + do { + ; + } while (ast_read32(ast, 0x10000) != 0x01); + } + + while (dram_reg_info->index != 0xffff) { + if (dram_reg_info->index == 0xff00) { /* delay fn */ + for (i = 0; i < 15; i++) + udelay(dram_reg_info->data); + } else if (dram_reg_info->index == 0x4 && + ast->chip != AST2000) { + data = dram_reg_info->data; + if (ast->dram_type == AST_DRAM_1Gx16) + data = 0x00000d89; + else if (ast->dram_type == AST_DRAM_1Gx32) + data = 0x00000c8d; + + temp = ast_read32(ast, 0x12070); + temp &= 0xc; + temp <<= 2; + ast_write32(ast, 0x10000 + dram_reg_info->index, + data | temp); + } else + ast_write32(ast, 0x10000 + dram_reg_info->index, + dram_reg_info->data); + dram_reg_info++; + } + + /* AST 2100/2150 DRAM calibration */ + data = ast_read32(ast, 0x10120); + if (data == 0x5061) { /* 266Mhz */ + data = ast_read32(ast, 0x10004); + if (data & 0x40) + cbrdlli_ast2150(ast, 16); /* 16 bits */ + else + cbrdlli_ast2150(ast, 32); /* 32 bits */ + } + + switch (ast->chip) { + case AST2000: + temp = ast_read32(ast, 0x10140); + ast_write32(ast, 0x10140, temp | 0x40); + break; + case AST1100: + case AST2100: + case AST2200: + case AST2150: + temp = ast_read32(ast, 0x1200c); + ast_write32(ast, 0x1200c, temp & 0xfffffffd); + temp = ast_read32(ast, 0x12040); + ast_write32(ast, 0x12040, temp | 0x40); + break; + default: + break; + } + } + + /* wait ready */ + do { + j = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + } while ((j & 0x40) == 0); +} + +void ast_post_gpu(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + struct pci_dev *pdev = to_pci_dev(dev->dev); + u32 reg; + + pci_read_config_dword(pdev, 0x04, &reg); + reg |= 0x3; + pci_write_config_dword(pdev, 0x04, reg); + + ast_enable_vga(dev); + ast_open_key(ast); + ast_enable_mmio(dev); + ast_set_def_ext_reg(dev); + + if (ast->chip == AST2600) { + ast_dp_launch(dev, 1); + } else if (ast->config_mode == ast_use_p2a) { + if (ast->chip == AST2500) + ast_post_chip_2500(dev); + else if (ast->chip == AST2300 || ast->chip == AST2400) + ast_post_chip_2300(dev); + else + ast_init_dram_reg(dev); + + ast_init_3rdtx(dev); + } else { + if (ast->tx_chip_types & AST_TX_SIL164_BIT) + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, + 0xcf, 0x80); /* Enable DVO */ + } +} + +/* AST 2300 DRAM settings */ +#define AST_DDR3 0 +#define AST_DDR2 1 + +struct ast2300_dram_param { + u32 dram_type; + u32 dram_chipid; + u32 dram_freq; + u32 vram_size; + u32 odt; + u32 wodt; + u32 rodt; + u32 dram_config; + u32 reg_PERIOD; + u32 reg_MADJ; + u32 reg_SADJ; + u32 reg_MRS; + u32 reg_EMRS; + u32 reg_AC1; + u32 reg_AC2; + u32 reg_DQSIC; + u32 reg_DRV; + u32 reg_IOZ; + u32 reg_DQIDLY; + u32 reg_FREQ; + u32 madj_max; + u32 dll2_finetune_step; +}; + +/* + * DQSI DLL CBR Setting + */ +#define CBR_SIZE0 ((1 << 10) - 1) +#define CBR_SIZE1 ((4 << 10) - 1) +#define CBR_SIZE2 ((64 << 10) - 1) +#define CBR_PASSNUM 5 +#define CBR_PASSNUM2 5 +#define CBR_THRESHOLD 10 +#define CBR_THRESHOLD2 10 +#define TIMEOUT 5000000 +#define CBR_PATNUM 8 + +static const u32 pattern[8] = { 0xFF00FF00, 0xCC33CC33, 0xAA55AA55, 0x88778877, + 0x92CC4D6E, 0x543D3CDE, 0xF1E843C7, 0x7C61D253 }; + +static bool mmc_test(struct ast_private *ast, u32 datagen, u8 test_ctl) +{ + u32 data, timeout; + + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); + timeout = 0; + do { + data = ast_mindwm(ast, 0x1e6e0070) & 0x3000; + if (data & 0x2000) + return false; + if (++timeout > TIMEOUT) { + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return false; + } + } while (!data); + ast_moutdwm(ast, 0x1e6e0070, 0x0); + return true; +} + +static u32 mmc_test2(struct ast_private *ast, u32 datagen, u8 test_ctl) +{ + u32 data, timeout; + + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + ast_moutdwm(ast, 0x1e6e0070, (datagen << 3) | test_ctl); + timeout = 0; + do { + data = ast_mindwm(ast, 0x1e6e0070) & 0x1000; + if (++timeout > TIMEOUT) { + ast_moutdwm(ast, 0x1e6e0070, 0x0); + return 0xffffffff; + } + } while (!data); + data = ast_mindwm(ast, 0x1e6e0078); + data = (data | (data >> 16)) & 0xffff; + ast_moutdwm(ast, 0x1e6e0070, 0x00000000); + return data; +} + +static bool mmc_test_burst(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc1); +} + +static u32 mmc_test_burst2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x41); +} + +static bool mmc_test_single(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0xc5); +} + +static u32 mmc_test_single2(struct ast_private *ast, u32 datagen) +{ + return mmc_test2(ast, datagen, 0x05); +} + +static bool mmc_test_single_2500(struct ast_private *ast, u32 datagen) +{ + return mmc_test(ast, datagen, 0x85); +} + +static int cbr_test(struct ast_private *ast) +{ + u32 data; + int i; + + data = mmc_test_single2(ast, 0); + if ((data & 0xff) && (data & 0xff00)) + return 0; + for (i = 0; i < 8; i++) { + data = mmc_test_burst2(ast, i); + if ((data & 0xff) && (data & 0xff00)) + return 0; + } + if (!data) + return 3; + else if (data & 0xff) + return 2; + return 1; +} + +static int cbr_scan(struct ast_private *ast) +{ + u32 data, data2, patcnt, loop; + + data2 = 3; + for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) { + ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]); + for (loop = 0; loop < CBR_PASSNUM2; loop++) { + data = cbr_test(ast); + if (data != 0) { + data2 &= data; + if (!data2) + return 0; + break; + } + } + if (loop == CBR_PASSNUM2) + return 0; + } + return data2; +} + +static u32 cbr_test2(struct ast_private *ast) +{ + u32 data; + + data = mmc_test_burst2(ast, 0); + if (data == 0xffff) + return 0; + data |= mmc_test_single2(ast, 0); + if (data == 0xffff) + return 0; + + return ~data & 0xffff; +} + +static u32 cbr_scan2(struct ast_private *ast) +{ + u32 data, data2, patcnt, loop; + + data2 = 0xffff; + for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) { + ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]); + for (loop = 0; loop < CBR_PASSNUM2; loop++) { + data = cbr_test2(ast); + if (data != 0) { + data2 &= data; + if (!data2) + return 0; + break; + } + } + if (loop == CBR_PASSNUM2) + return 0; + } + return data2; +} + +static bool cbr_test3(struct ast_private *ast) +{ + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_single(ast, 0)) + return false; + return true; +} + +static bool cbr_scan3(struct ast_private *ast) +{ + u32 patcnt, loop; + + for (patcnt = 0; patcnt < CBR_PATNUM; patcnt++) { + ast_moutdwm(ast, 0x1e6e007c, pattern[patcnt]); + for (loop = 0; loop < 2; loop++) { + if (cbr_test3(ast)) + break; + } + if (loop == 2) + return false; + } + return true; +} + +static bool finetuneDQI_L(struct ast_private *ast, + struct ast2300_dram_param *param) +{ + u32 gold_sadj[2], dllmin[16], dllmax[16], dlli, data, cnt, mask, + passcnt, retry = 0; + bool status = false; +FINETUNE_START: + for (cnt = 0; cnt < 16; cnt++) { + dllmin[cnt] = 0xff; + dllmax[cnt] = 0x0; + } + passcnt = 0; + for (dlli = 0; dlli < 76; dlli++) { + ast_moutdwm(ast, 0x1E6E0068, + 0x00001400 | (dlli << 16) | (dlli << 24)); + ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE1); + data = cbr_scan2(ast); + if (data != 0) { + mask = 0x00010001; + for (cnt = 0; cnt < 16; cnt++) { + if (data & mask) { + if (dllmin[cnt] > dlli) + dllmin[cnt] = dlli; + if (dllmax[cnt] < dlli) + dllmax[cnt] = dlli; + } + mask <<= 1; + } + passcnt++; + } else if (passcnt >= CBR_THRESHOLD2) { + break; + } + } + gold_sadj[0] = 0x0; + passcnt = 0; + for (cnt = 0; cnt < 16; cnt++) { + if ((dllmax[cnt] > dllmin[cnt]) && + ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) { + gold_sadj[0] += dllmin[cnt]; + passcnt++; + } + } + if (retry++ > 10) + goto FINETUNE_DONE; + if (passcnt != 16) + goto FINETUNE_START; + status = true; +FINETUNE_DONE: + gold_sadj[0] = gold_sadj[0] >> 4; + gold_sadj[1] = gold_sadj[0]; + + data = 0; + for (cnt = 0; cnt < 8; cnt++) { + data >>= 3; + if ((dllmax[cnt] > dllmin[cnt]) && + ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) { + dlli = dllmin[cnt]; + if (gold_sadj[0] >= dlli) { + dlli = ((gold_sadj[0] - dlli) * 19) >> 5; + if (dlli > 3) + dlli = 3; + } else { + dlli = ((dlli - gold_sadj[0]) * 19) >> 5; + if (dlli > 4) + dlli = 4; + dlli = (8 - dlli) & 0x7; + } + data |= dlli << 21; + } + } + ast_moutdwm(ast, 0x1E6E0080, data); + + data = 0; + for (cnt = 8; cnt < 16; cnt++) { + data >>= 3; + if ((dllmax[cnt] > dllmin[cnt]) && + ((dllmax[cnt] - dllmin[cnt]) >= CBR_THRESHOLD2)) { + dlli = dllmin[cnt]; + if (gold_sadj[1] >= dlli) { + dlli = ((gold_sadj[1] - dlli) * 19) >> 5; + if (dlli > 3) + dlli = 3; + else + dlli = (dlli - 1) & 0x7; + } else { + dlli = ((dlli - gold_sadj[1]) * 19) >> 5; + dlli += 1; + if (dlli > 4) + dlli = 4; + dlli = (8 - dlli) & 0x7; + } + data |= dlli << 21; + } + } + ast_moutdwm(ast, 0x1E6E0084, data); + return status; +} /* finetuneDQI_L */ + +static void finetuneDQSI(struct ast_private *ast) +{ + u32 dlli, dqsip, dqidly; + u32 reg_mcr18, reg_mcr0c, passcnt[2], diff; + u32 g_dqidly, g_dqsip, g_margin, g_side; + u16 pass[32][2][2]; + char tag[2][76]; + + /* Disable DQI CBR */ + reg_mcr0c = ast_mindwm(ast, 0x1E6E000C); + reg_mcr18 = ast_mindwm(ast, 0x1E6E0018); + reg_mcr18 &= 0x0000ffff; + ast_moutdwm(ast, 0x1E6E0018, reg_mcr18); + + for (dlli = 0; dlli < 76; dlli++) { + tag[0][dlli] = 0x0; + tag[1][dlli] = 0x0; + } + for (dqidly = 0; dqidly < 32; dqidly++) { + pass[dqidly][0][0] = 0xff; + pass[dqidly][0][1] = 0x0; + pass[dqidly][1][0] = 0xff; + pass[dqidly][1][1] = 0x0; + } + for (dqidly = 0; dqidly < 32; dqidly++) { + passcnt[0] = passcnt[1] = 0; + for (dqsip = 0; dqsip < 2; dqsip++) { + ast_moutdwm(ast, 0x1E6E000C, 0); + ast_moutdwm(ast, 0x1E6E0018, + reg_mcr18 | (dqidly << 16) | (dqsip << 23)); + ast_moutdwm(ast, 0x1E6E000C, reg_mcr0c); + for (dlli = 0; dlli < 76; dlli++) { + ast_moutdwm(ast, 0x1E6E0068, + 0x00001300 | (dlli << 16) | + (dlli << 24)); + ast_moutdwm(ast, 0x1E6E0070, 0); + ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE0); + if (cbr_scan3(ast)) { + if (dlli == 0) + break; + passcnt[dqsip]++; + tag[dqsip][dlli] = 'P'; + if (dlli < pass[dqidly][dqsip][0]) + pass[dqidly][dqsip][0] = + (u16)dlli; + if (dlli > pass[dqidly][dqsip][1]) + pass[dqidly][dqsip][1] = + (u16)dlli; + } + if (passcnt[dqsip] >= 5) + break; + if (!cbr_scan3(ast)) { + pass[dqidly][dqsip][0] = 0xff; + pass[dqidly][dqsip][1] = 0x0; + } + } + } + if (passcnt[0] == 0 && passcnt[1] == 0) + dqidly++; + } + /* Search margin */ + g_dqidly = g_dqsip = g_margin = g_side = 0; + + for (dqidly = 0; dqidly < 32; dqidly++) { + for (dqsip = 0; dqsip < 2; dqsip++) { + if (pass[dqidly][dqsip][0] > pass[dqidly][dqsip][1]) + continue; + diff = pass[dqidly][dqsip][1] - pass[dqidly][dqsip][0]; + if ((diff + 2) < g_margin) + continue; + passcnt[0] = passcnt[1] = 0; + for (dlli = pass[dqidly][dqsip][0]; + dlli > 0 && tag[dqsip][dlli] != 0; + dlli--, passcnt[0]++) + ; + for (dlli = pass[dqidly][dqsip][1]; + dlli < 76 && tag[dqsip][dlli] != 0; + dlli++, passcnt[1]++) + ; + if (passcnt[0] > passcnt[1]) + passcnt[0] = passcnt[1]; + passcnt[1] = 0; + if (passcnt[0] > g_side) + passcnt[1] = passcnt[0] - g_side; + if (diff > (g_margin + 1) && + (passcnt[1] > 0 || passcnt[0] > 8)) { + g_margin = diff; + g_dqidly = dqidly; + g_dqsip = dqsip; + g_side = passcnt[0]; + } else if (passcnt[1] > 1 && g_side < 8) { + if (diff > g_margin) + g_margin = diff; + g_dqidly = dqidly; + g_dqsip = dqsip; + g_side = passcnt[0]; + } + } + } + reg_mcr18 = reg_mcr18 | (g_dqidly << 16) | (g_dqsip << 23); + ast_moutdwm(ast, 0x1E6E0018, reg_mcr18); +} +static bool cbr_dll2(struct ast_private *ast, struct ast2300_dram_param *param) +{ + u32 dllmin[2], dllmax[2], dlli, data, passcnt, retry = 0; + bool status = false; + + finetuneDQSI(ast); + if (finetuneDQI_L(ast, param) == false) + return status; + +CBR_START2: + dllmin[0] = dllmin[1] = 0xff; + dllmax[0] = dllmax[1] = 0x0; + passcnt = 0; + for (dlli = 0; dlli < 76; dlli++) { + ast_moutdwm(ast, 0x1E6E0068, + 0x00001300 | (dlli << 16) | (dlli << 24)); + ast_moutdwm(ast, 0x1E6E0074, CBR_SIZE2); + data = cbr_scan(ast); + if (data != 0) { + if (data & 0x1) { + if (dllmin[0] > dlli) + dllmin[0] = dlli; + if (dllmax[0] < dlli) + dllmax[0] = dlli; + } + if (data & 0x2) { + if (dllmin[1] > dlli) + dllmin[1] = dlli; + if (dllmax[1] < dlli) + dllmax[1] = dlli; + } + passcnt++; + } else if (passcnt >= CBR_THRESHOLD) { + break; + } + } + if (retry++ > 10) + goto CBR_DONE2; + if (dllmax[0] == 0 || (dllmax[0] - dllmin[0]) < CBR_THRESHOLD) + goto CBR_START2; + if (dllmax[1] == 0 || (dllmax[1] - dllmin[1]) < CBR_THRESHOLD) + goto CBR_START2; + status = true; +CBR_DONE2: + dlli = (dllmin[1] + dllmax[1]) >> 1; + dlli <<= 8; + dlli += (dllmin[0] + dllmax[0]) >> 1; + ast_moutdwm(ast, 0x1E6E0068, + ast_mindwm(ast, 0x1E720058) | (dlli << 16)); + return status; +} /* CBRDLL2 */ + +static void get_ddr3_info(struct ast_private *ast, + struct ast2300_dram_param *param) +{ + u32 trap, trap_AC2, trap_MRS; + + ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8); + + /* Ger trap info */ + trap = (ast_mindwm(ast, 0x1E6E2070) >> 25) & 0x3; + trap_AC2 = 0x00020000 + (trap << 16); + trap_AC2 |= 0x00300000 + ((trap & 0x2) << 19); + trap_MRS = 0x00000010 + (trap << 4); + trap_MRS |= ((trap & 0x2) << 18); + + param->reg_MADJ = 0x00034C4C; + param->reg_SADJ = 0x00001800; + param->reg_DRV = 0x000000F0; + param->reg_PERIOD = param->dram_freq; + param->rodt = 0; + + switch (param->dram_freq) { + case 336: + ast_moutdwm(ast, 0x1E6E2020, 0x0190); + param->wodt = 0; + param->reg_AC1 = 0x22202725; + param->reg_AC2 = 0xAA007613 | trap_AC2; + param->reg_DQSIC = 0x000000BA; + param->reg_MRS = 0x04001400 | trap_MRS; + param->reg_EMRS = 0x00000000; + param->reg_IOZ = 0x00000023; + param->reg_DQIDLY = 0x00000074; + param->reg_FREQ = 0x00004DC0; + param->madj_max = 96; + param->dll2_finetune_step = 3; + switch (param->dram_chipid) { + default: + case AST_DRAM_512Mx16: + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xAA007613 | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xAA00761C | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xAA007636 | trap_AC2; + break; + } + break; + default: + case 396: + ast_moutdwm(ast, 0x1E6E2020, 0x03F1); + param->wodt = 1; + param->reg_AC1 = 0x33302825; + param->reg_AC2 = 0xCC009617 | trap_AC2; + param->reg_DQSIC = 0x000000E2; + param->reg_MRS = 0x04001600 | trap_MRS; + param->reg_EMRS = 0x00000000; + param->reg_IOZ = 0x00000034; + param->reg_DRV = 0x000000FA; + param->reg_DQIDLY = 0x00000089; + param->reg_FREQ = 0x00005040; + param->madj_max = 96; + param->dll2_finetune_step = 4; + + switch (param->dram_chipid) { + default: + case AST_DRAM_512Mx16: + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xCC009617 | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xCC009622 | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xCC00963F | trap_AC2; + break; + } + break; + + case 408: + ast_moutdwm(ast, 0x1E6E2020, 0x01F0); + param->wodt = 1; + param->reg_AC1 = 0x33302825; + param->reg_AC2 = 0xCC009617 | trap_AC2; + param->reg_DQSIC = 0x000000E2; + param->reg_MRS = 0x04001600 | trap_MRS; + param->reg_EMRS = 0x00000000; + param->reg_IOZ = 0x00000023; + param->reg_DRV = 0x000000FA; + param->reg_DQIDLY = 0x00000089; + param->reg_FREQ = 0x000050C0; + param->madj_max = 96; + param->dll2_finetune_step = 4; + + switch (param->dram_chipid) { + default: + case AST_DRAM_512Mx16: + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xCC009617 | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xCC009622 | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xCC00963F | trap_AC2; + break; + } + + break; + case 456: + ast_moutdwm(ast, 0x1E6E2020, 0x0230); + param->wodt = 0; + param->reg_AC1 = 0x33302926; + param->reg_AC2 = 0xCD44961A; + param->reg_DQSIC = 0x000000FC; + param->reg_MRS = 0x00081830; + param->reg_EMRS = 0x00000000; + param->reg_IOZ = 0x00000045; + param->reg_DQIDLY = 0x00000097; + param->reg_FREQ = 0x000052C0; + param->madj_max = 88; + param->dll2_finetune_step = 4; + break; + case 504: + ast_moutdwm(ast, 0x1E6E2020, 0x0270); + param->wodt = 1; + param->reg_AC1 = 0x33302926; + param->reg_AC2 = 0xDE44A61D; + param->reg_DQSIC = 0x00000117; + param->reg_MRS = 0x00081A30; + param->reg_EMRS = 0x00000000; + param->reg_IOZ = 0x070000BB; + param->reg_DQIDLY = 0x000000A0; + param->reg_FREQ = 0x000054C0; + param->madj_max = 79; + param->dll2_finetune_step = 4; + break; + case 528: + ast_moutdwm(ast, 0x1E6E2020, 0x0290); + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x33302926; + param->reg_AC2 = 0xEF44B61E; + param->reg_DQSIC = 0x00000125; + param->reg_MRS = 0x00081A30; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x000000F5; + param->reg_IOZ = 0x00000023; + param->reg_DQIDLY = 0x00000088; + param->reg_FREQ = 0x000055C0; + param->madj_max = 76; + param->dll2_finetune_step = 3; + break; + case 576: + ast_moutdwm(ast, 0x1E6E2020, 0x0140); + param->reg_MADJ = 0x00136868; + param->reg_SADJ = 0x00004534; + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x33302A37; + param->reg_AC2 = 0xEF56B61E; + param->reg_DQSIC = 0x0000013F; + param->reg_MRS = 0x00101A50; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x000000FA; + param->reg_IOZ = 0x00000023; + param->reg_DQIDLY = 0x00000078; + param->reg_FREQ = 0x000057C0; + param->madj_max = 136; + param->dll2_finetune_step = 3; + break; + case 600: + ast_moutdwm(ast, 0x1E6E2020, 0x02E1); + param->reg_MADJ = 0x00136868; + param->reg_SADJ = 0x00004534; + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x32302A37; + param->reg_AC2 = 0xDF56B61F; + param->reg_DQSIC = 0x0000014D; + param->reg_MRS = 0x00101A50; + param->reg_EMRS = 0x00000004; + param->reg_DRV = 0x000000F5; + param->reg_IOZ = 0x00000023; + param->reg_DQIDLY = 0x00000078; + param->reg_FREQ = 0x000058C0; + param->madj_max = 132; + param->dll2_finetune_step = 3; + break; + case 624: + ast_moutdwm(ast, 0x1E6E2020, 0x0160); + param->reg_MADJ = 0x00136868; + param->reg_SADJ = 0x00004534; + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x32302A37; + param->reg_AC2 = 0xEF56B621; + param->reg_DQSIC = 0x0000015A; + param->reg_MRS = 0x02101A50; + param->reg_EMRS = 0x00000004; + param->reg_DRV = 0x000000F5; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x00000078; + param->reg_FREQ = 0x000059C0; + param->madj_max = 128; + param->dll2_finetune_step = 3; + break; + } /* switch freq */ + + switch (param->dram_chipid) { + case AST_DRAM_512Mx16: + param->dram_config = 0x130; + break; + default: + case AST_DRAM_1Gx16: + param->dram_config = 0x131; + break; + case AST_DRAM_2Gx16: + param->dram_config = 0x132; + break; + case AST_DRAM_4Gx16: + param->dram_config = 0x133; + break; + } /* switch size */ + + switch (param->vram_size) { + default: + case AST_VIDMEM_SIZE_8M: + param->dram_config |= 0x00; + break; + case AST_VIDMEM_SIZE_16M: + param->dram_config |= 0x04; + break; + case AST_VIDMEM_SIZE_32M: + param->dram_config |= 0x08; + break; + case AST_VIDMEM_SIZE_64M: + param->dram_config |= 0x0c; + break; + } +} + +static void ddr3_init(struct ast_private *ast, struct ast2300_dram_param *param) +{ + u32 data, data2, retry = 0; + +ddr3_init_start: + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); + ast_moutdwm(ast, 0x1E6E0018, 0x00000100); + ast_moutdwm(ast, 0x1E6E0024, 0x00000000); + ast_moutdwm(ast, 0x1E6E0034, 0x00000000); + udelay(10); + ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ); + ast_moutdwm(ast, 0x1E6E0068, param->reg_SADJ); + udelay(10); + ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000); + udelay(10); + + ast_moutdwm(ast, 0x1E6E0004, param->dram_config); + ast_moutdwm(ast, 0x1E6E0008, 0x90040f); + ast_moutdwm(ast, 0x1E6E0010, param->reg_AC1); + ast_moutdwm(ast, 0x1E6E0014, param->reg_AC2); + ast_moutdwm(ast, 0x1E6E0020, param->reg_DQSIC); + ast_moutdwm(ast, 0x1E6E0080, 0x00000000); + ast_moutdwm(ast, 0x1E6E0084, 0x00000000); + ast_moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY); + ast_moutdwm(ast, 0x1E6E0018, 0x4000A170); + ast_moutdwm(ast, 0x1E6E0018, 0x00002370); + ast_moutdwm(ast, 0x1E6E0038, 0x00000000); + ast_moutdwm(ast, 0x1E6E0040, 0xFF444444); + ast_moutdwm(ast, 0x1E6E0044, 0x22222222); + ast_moutdwm(ast, 0x1E6E0048, 0x22222222); + ast_moutdwm(ast, 0x1E6E004C, 0x00000002); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0050, 0x00000000); + ast_moutdwm(ast, 0x1E6E0054, 0); + ast_moutdwm(ast, 0x1E6E0060, param->reg_DRV); + ast_moutdwm(ast, 0x1E6E006C, param->reg_IOZ); + ast_moutdwm(ast, 0x1E6E0070, 0x00000000); + ast_moutdwm(ast, 0x1E6E0074, 0x00000000); + ast_moutdwm(ast, 0x1E6E0078, 0x00000000); + ast_moutdwm(ast, 0x1E6E007C, 0x00000000); + /* Wait MCLK2X lock to MCLK */ + do { + data = ast_mindwm(ast, 0x1E6E001C); + } while (!(data & 0x08000000)); + data = ast_mindwm(ast, 0x1E6E001C); + data = (data >> 8) & 0xff; + while ((data & 0x08) || ((data & 0x7) < 2) || (data < 4)) { + data2 = (ast_mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4; + if ((data2 & 0xff) > param->madj_max) + break; + ast_moutdwm(ast, 0x1E6E0064, data2); + if (data2 & 0x00100000) + data2 = ((data2 & 0xff) >> 3) + 3; + else + data2 = ((data2 & 0xff) >> 2) + 5; + data = ast_mindwm(ast, 0x1E6E0068) & 0xffff00ff; + data2 += data & 0xff; + data = data | (data2 << 8); + ast_moutdwm(ast, 0x1E6E0068, data); + udelay(10); + ast_moutdwm(ast, 0x1E6E0064, + ast_mindwm(ast, 0x1E6E0064) | 0xC0000); + udelay(10); + data = ast_mindwm(ast, 0x1E6E0018) & 0xfffff1ff; + ast_moutdwm(ast, 0x1E6E0018, data); + data = data | 0x200; + ast_moutdwm(ast, 0x1E6E0018, data); + do { + data = ast_mindwm(ast, 0x1E6E001C); + } while (!(data & 0x08000000)); + + data = ast_mindwm(ast, 0x1E6E001C); + data = (data >> 8) & 0xff; + } + ast_moutdwm(ast, 0x1E720058, ast_mindwm(ast, 0x1E6E0068) & 0xffff); + data = ast_mindwm(ast, 0x1E6E0018) | 0xC00; + ast_moutdwm(ast, 0x1E6E0018, data); + + ast_moutdwm(ast, 0x1E6E0034, 0x00000001); + ast_moutdwm(ast, 0x1E6E000C, 0x00000040); + udelay(50); + /* Mode Register Setting */ + ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100); + ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS); + ast_moutdwm(ast, 0x1E6E0028, 0x00000005); + ast_moutdwm(ast, 0x1E6E0028, 0x00000007); + ast_moutdwm(ast, 0x1E6E0028, 0x00000003); + ast_moutdwm(ast, 0x1E6E0028, 0x00000001); + ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C08); + ast_moutdwm(ast, 0x1E6E0028, 0x00000001); + + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + data = 0; + if (param->wodt) + data = 0x300; + if (param->rodt) + data = data | 0x3000 | ((param->reg_AC2 & 0x60000) >> 3); + ast_moutdwm(ast, 0x1E6E0034, data | 0x3); + + /* Calibrate the DQSI delay */ + if ((cbr_dll2(ast, param) == false) && (retry++ < 10)) + goto ddr3_init_start; + + ast_moutdwm(ast, 0x1E6E0120, param->reg_FREQ); + /* ECC Memory Initialization */ +#ifdef ECC + ast_moutdwm(ast, 0x1E6E007C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0070, 0x221); + do { + data = ast_mindwm(ast, 0x1E6E0070); + } while (!(data & 0x00001000)); + ast_moutdwm(ast, 0x1E6E0070, 0x00000000); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0050, 0x00000000); +#endif +} + +static void get_ddr2_info(struct ast_private *ast, + struct ast2300_dram_param *param) +{ + u32 trap, trap_AC2, trap_MRS; + + ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8); + + /* Ger trap info */ + trap = (ast_mindwm(ast, 0x1E6E2070) >> 25) & 0x3; + trap_AC2 = (trap << 20) | (trap << 16); + trap_AC2 += 0x00110000; + trap_MRS = 0x00000040 | (trap << 4); + + param->reg_MADJ = 0x00034C4C; + param->reg_SADJ = 0x00001800; + param->reg_DRV = 0x000000F0; + param->reg_PERIOD = param->dram_freq; + param->rodt = 0; + + switch (param->dram_freq) { + case 264: + ast_moutdwm(ast, 0x1E6E2020, 0x0130); + param->wodt = 0; + param->reg_AC1 = 0x11101513; + param->reg_AC2 = 0x78117011; + param->reg_DQSIC = 0x00000092; + param->reg_MRS = 0x00000842; + param->reg_EMRS = 0x00000000; + param->reg_DRV = 0x000000F0; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x0000005A; + param->reg_FREQ = 0x00004AC0; + param->madj_max = 138; + param->dll2_finetune_step = 3; + break; + case 336: + ast_moutdwm(ast, 0x1E6E2020, 0x0190); + param->wodt = 1; + param->reg_AC1 = 0x22202613; + param->reg_AC2 = 0xAA009016 | trap_AC2; + param->reg_DQSIC = 0x000000BA; + param->reg_MRS = 0x00000A02 | trap_MRS; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x000000FA; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x00000074; + param->reg_FREQ = 0x00004DC0; + param->madj_max = 96; + param->dll2_finetune_step = 3; + switch (param->dram_chipid) { + default: + case AST_DRAM_512Mx16: + param->reg_AC2 = 0xAA009012 | trap_AC2; + break; + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xAA009016 | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xAA009023 | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xAA00903B | trap_AC2; + break; + } + break; + default: + case 396: + ast_moutdwm(ast, 0x1E6E2020, 0x03F1); + param->wodt = 1; + param->rodt = 0; + param->reg_AC1 = 0x33302714; + param->reg_AC2 = 0xCC00B01B | trap_AC2; + param->reg_DQSIC = 0x000000E2; + param->reg_MRS = 0x00000C02 | trap_MRS; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x000000FA; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x00000089; + param->reg_FREQ = 0x00005040; + param->madj_max = 96; + param->dll2_finetune_step = 4; + + switch (param->dram_chipid) { + case AST_DRAM_512Mx16: + param->reg_AC2 = 0xCC00B016 | trap_AC2; + break; + default: + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xCC00B01B | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xCC00B02B | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xCC00B03F | trap_AC2; + break; + } + + break; + + case 408: + ast_moutdwm(ast, 0x1E6E2020, 0x01F0); + param->wodt = 1; + param->rodt = 0; + param->reg_AC1 = 0x33302714; + param->reg_AC2 = 0xCC00B01B | trap_AC2; + param->reg_DQSIC = 0x000000E2; + param->reg_MRS = 0x00000C02 | trap_MRS; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x000000FA; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x00000089; + param->reg_FREQ = 0x000050C0; + param->madj_max = 96; + param->dll2_finetune_step = 4; + + switch (param->dram_chipid) { + case AST_DRAM_512Mx16: + param->reg_AC2 = 0xCC00B016 | trap_AC2; + break; + default: + case AST_DRAM_1Gx16: + param->reg_AC2 = 0xCC00B01B | trap_AC2; + break; + case AST_DRAM_2Gx16: + param->reg_AC2 = 0xCC00B02B | trap_AC2; + break; + case AST_DRAM_4Gx16: + param->reg_AC2 = 0xCC00B03F | trap_AC2; + break; + } + + break; + case 456: + ast_moutdwm(ast, 0x1E6E2020, 0x0230); + param->wodt = 0; + param->reg_AC1 = 0x33302815; + param->reg_AC2 = 0xCD44B01E; + param->reg_DQSIC = 0x000000FC; + param->reg_MRS = 0x00000E72; + param->reg_EMRS = 0x00000000; + param->reg_DRV = 0x00000000; + param->reg_IOZ = 0x00000034; + param->reg_DQIDLY = 0x00000097; + param->reg_FREQ = 0x000052C0; + param->madj_max = 88; + param->dll2_finetune_step = 3; + break; + case 504: + ast_moutdwm(ast, 0x1E6E2020, 0x0261); + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x33302815; + param->reg_AC2 = 0xDE44C022; + param->reg_DQSIC = 0x00000117; + param->reg_MRS = 0x00000E72; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x0000000A; + param->reg_IOZ = 0x00000045; + param->reg_DQIDLY = 0x000000A0; + param->reg_FREQ = 0x000054C0; + param->madj_max = 79; + param->dll2_finetune_step = 3; + break; + case 528: + ast_moutdwm(ast, 0x1E6E2020, 0x0120); + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x33302815; + param->reg_AC2 = 0xEF44D024; + param->reg_DQSIC = 0x00000125; + param->reg_MRS = 0x00000E72; + param->reg_EMRS = 0x00000004; + param->reg_DRV = 0x000000F9; + param->reg_IOZ = 0x00000045; + param->reg_DQIDLY = 0x000000A7; + param->reg_FREQ = 0x000055C0; + param->madj_max = 76; + param->dll2_finetune_step = 3; + break; + case 552: + ast_moutdwm(ast, 0x1E6E2020, 0x02A1); + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x43402915; + param->reg_AC2 = 0xFF44E025; + param->reg_DQSIC = 0x00000132; + param->reg_MRS = 0x00000E72; + param->reg_EMRS = 0x00000040; + param->reg_DRV = 0x0000000A; + param->reg_IOZ = 0x00000045; + param->reg_DQIDLY = 0x000000AD; + param->reg_FREQ = 0x000056C0; + param->madj_max = 76; + param->dll2_finetune_step = 3; + break; + case 576: + ast_moutdwm(ast, 0x1E6E2020, 0x0140); + param->wodt = 1; + param->rodt = 1; + param->reg_AC1 = 0x43402915; + param->reg_AC2 = 0xFF44E027; + param->reg_DQSIC = 0x0000013F; + param->reg_MRS = 0x00000E72; + param->reg_EMRS = 0x00000004; + param->reg_DRV = 0x000000F5; + param->reg_IOZ = 0x00000045; + param->reg_DQIDLY = 0x000000B3; + param->reg_FREQ = 0x000057C0; + param->madj_max = 76; + param->dll2_finetune_step = 3; + break; + } + + switch (param->dram_chipid) { + case AST_DRAM_512Mx16: + param->dram_config = 0x100; + break; + default: + case AST_DRAM_1Gx16: + param->dram_config = 0x121; + break; + case AST_DRAM_2Gx16: + param->dram_config = 0x122; + break; + case AST_DRAM_4Gx16: + param->dram_config = 0x123; + break; + } /* switch size */ + + switch (param->vram_size) { + default: + case AST_VIDMEM_SIZE_8M: + param->dram_config |= 0x00; + break; + case AST_VIDMEM_SIZE_16M: + param->dram_config |= 0x04; + break; + case AST_VIDMEM_SIZE_32M: + param->dram_config |= 0x08; + break; + case AST_VIDMEM_SIZE_64M: + param->dram_config |= 0x0c; + break; + } +} + +static void ddr2_init(struct ast_private *ast, struct ast2300_dram_param *param) +{ + u32 data, data2, retry = 0; + +ddr2_init_start: + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); + ast_moutdwm(ast, 0x1E6E0018, 0x00000100); + ast_moutdwm(ast, 0x1E6E0024, 0x00000000); + ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ); + ast_moutdwm(ast, 0x1E6E0068, param->reg_SADJ); + udelay(10); + ast_moutdwm(ast, 0x1E6E0064, param->reg_MADJ | 0xC0000); + udelay(10); + + ast_moutdwm(ast, 0x1E6E0004, param->dram_config); + ast_moutdwm(ast, 0x1E6E0008, 0x90040f); + ast_moutdwm(ast, 0x1E6E0010, param->reg_AC1); + ast_moutdwm(ast, 0x1E6E0014, param->reg_AC2); + ast_moutdwm(ast, 0x1E6E0020, param->reg_DQSIC); + ast_moutdwm(ast, 0x1E6E0080, 0x00000000); + ast_moutdwm(ast, 0x1E6E0084, 0x00000000); + ast_moutdwm(ast, 0x1E6E0088, param->reg_DQIDLY); + ast_moutdwm(ast, 0x1E6E0018, 0x4000A130); + ast_moutdwm(ast, 0x1E6E0018, 0x00002330); + ast_moutdwm(ast, 0x1E6E0038, 0x00000000); + ast_moutdwm(ast, 0x1E6E0040, 0xFF808000); + ast_moutdwm(ast, 0x1E6E0044, 0x88848466); + ast_moutdwm(ast, 0x1E6E0048, 0x44440008); + ast_moutdwm(ast, 0x1E6E004C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0050, 0x00000000); + ast_moutdwm(ast, 0x1E6E0054, 0); + ast_moutdwm(ast, 0x1E6E0060, param->reg_DRV); + ast_moutdwm(ast, 0x1E6E006C, param->reg_IOZ); + ast_moutdwm(ast, 0x1E6E0070, 0x00000000); + ast_moutdwm(ast, 0x1E6E0074, 0x00000000); + ast_moutdwm(ast, 0x1E6E0078, 0x00000000); + ast_moutdwm(ast, 0x1E6E007C, 0x00000000); + + /* Wait MCLK2X lock to MCLK */ + do { + data = ast_mindwm(ast, 0x1E6E001C); + } while (!(data & 0x08000000)); + data = ast_mindwm(ast, 0x1E6E001C); + data = (data >> 8) & 0xff; + while ((data & 0x08) || ((data & 0x7) < 2) || (data < 4)) { + data2 = (ast_mindwm(ast, 0x1E6E0064) & 0xfff3ffff) + 4; + if ((data2 & 0xff) > param->madj_max) + break; + ast_moutdwm(ast, 0x1E6E0064, data2); + if (data2 & 0x00100000) + data2 = ((data2 & 0xff) >> 3) + 3; + else + data2 = ((data2 & 0xff) >> 2) + 5; + data = ast_mindwm(ast, 0x1E6E0068) & 0xffff00ff; + data2 += data & 0xff; + data = data | (data2 << 8); + ast_moutdwm(ast, 0x1E6E0068, data); + udelay(10); + ast_moutdwm(ast, 0x1E6E0064, + ast_mindwm(ast, 0x1E6E0064) | 0xC0000); + udelay(10); + data = ast_mindwm(ast, 0x1E6E0018) & 0xfffff1ff; + ast_moutdwm(ast, 0x1E6E0018, data); + data = data | 0x200; + ast_moutdwm(ast, 0x1E6E0018, data); + do { + data = ast_mindwm(ast, 0x1E6E001C); + } while (!(data & 0x08000000)); + + data = ast_mindwm(ast, 0x1E6E001C); + data = (data >> 8) & 0xff; + } + ast_moutdwm(ast, 0x1E720058, ast_mindwm(ast, 0x1E6E0008) & 0xffff); + data = ast_mindwm(ast, 0x1E6E0018) | 0xC00; + ast_moutdwm(ast, 0x1E6E0018, data); + + ast_moutdwm(ast, 0x1E6E0034, 0x00000001); + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + udelay(50); + /* Mode Register Setting */ + ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS | 0x100); + ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS); + ast_moutdwm(ast, 0x1E6E0028, 0x00000005); + ast_moutdwm(ast, 0x1E6E0028, 0x00000007); + ast_moutdwm(ast, 0x1E6E0028, 0x00000003); + ast_moutdwm(ast, 0x1E6E0028, 0x00000001); + + ast_moutdwm(ast, 0x1E6E000C, 0x00005C08); + ast_moutdwm(ast, 0x1E6E002C, param->reg_MRS); + ast_moutdwm(ast, 0x1E6E0028, 0x00000001); + ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS | 0x380); + ast_moutdwm(ast, 0x1E6E0028, 0x00000003); + ast_moutdwm(ast, 0x1E6E0030, param->reg_EMRS); + ast_moutdwm(ast, 0x1E6E0028, 0x00000003); + + ast_moutdwm(ast, 0x1E6E000C, 0x7FFF5C01); + data = 0; + if (param->wodt) + data = 0x500; + if (param->rodt) + data = data | 0x3000 | ((param->reg_AC2 & 0x60000) >> 3); + ast_moutdwm(ast, 0x1E6E0034, data | 0x3); + ast_moutdwm(ast, 0x1E6E0120, param->reg_FREQ); + + /* Calibrate the DQSI delay */ + if ((cbr_dll2(ast, param) == false) && (retry++ < 10)) + goto ddr2_init_start; + + /* ECC Memory Initialization */ +#ifdef ECC + ast_moutdwm(ast, 0x1E6E007C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0070, 0x221); + do { + data = ast_mindwm(ast, 0x1E6E0070); + } while (!(data & 0x00001000)); + ast_moutdwm(ast, 0x1E6E0070, 0x00000000); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0050, 0x00000000); +#endif +} + +static void ast_post_chip_2300(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + struct ast2300_dram_param param; + u32 temp; + u8 reg; + + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + if ((reg & 0x80) == 0) { /* vga only */ + ast_write32(ast, 0xf004, 0x1e6e0000); + ast_write32(ast, 0xf000, 0x1); + ast_write32(ast, 0x12000, 0x1688a8a8); + do { + ; + } while (ast_read32(ast, 0x12000) != 0x1); + + ast_write32(ast, 0x10000, 0xfc600309); + do { + ; + } while (ast_read32(ast, 0x10000) != 0x1); + + /* Slow down CPU/AHB CLK in VGA only mode */ + temp = ast_read32(ast, 0x12008); + temp |= 0x73; + ast_write32(ast, 0x12008, temp); + + param.dram_freq = 396; + param.dram_type = AST_DDR3; + temp = ast_mindwm(ast, 0x1e6e2070); + if (temp & 0x01000000) + param.dram_type = AST_DDR2; + switch (temp & 0x18000000) { + case 0: + param.dram_chipid = AST_DRAM_512Mx16; + break; + default: + case 0x08000000: + param.dram_chipid = AST_DRAM_1Gx16; + break; + case 0x10000000: + param.dram_chipid = AST_DRAM_2Gx16; + break; + case 0x18000000: + param.dram_chipid = AST_DRAM_4Gx16; + break; + } + switch (temp & 0x0c) { + default: + case 0x00: + param.vram_size = AST_VIDMEM_SIZE_8M; + break; + + case 0x04: + param.vram_size = AST_VIDMEM_SIZE_16M; + break; + + case 0x08: + param.vram_size = AST_VIDMEM_SIZE_32M; + break; + + case 0x0c: + param.vram_size = AST_VIDMEM_SIZE_64M; + break; + } + + if (param.dram_type == AST_DDR3) { + get_ddr3_info(ast, &param); + ddr3_init(ast, &param); + } else { + get_ddr2_info(ast, &param); + ddr2_init(ast, &param); + } + + temp = ast_mindwm(ast, 0x1e6e2040); + ast_moutdwm(ast, 0x1e6e2040, temp | 0x40); + } + + /* wait ready */ + do { + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + } while ((reg & 0x40) == 0); +} + +static bool cbr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static bool ddr_test_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0074, 0x0000FFFF); + ast_moutdwm(ast, 0x1E6E007C, 0xFF00FF00); + if (!mmc_test_burst(ast, 0)) + return false; + if (!mmc_test_burst(ast, 1)) + return false; + if (!mmc_test_burst(ast, 2)) + return false; + if (!mmc_test_burst(ast, 3)) + return false; + if (!mmc_test_single_2500(ast, 0)) + return false; + return true; +} + +static void ddr_init_common_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + ast_moutdwm(ast, 0x1E6E0008, 0x2003000F); + ast_moutdwm(ast, 0x1E6E0038, 0x00000FFF); + ast_moutdwm(ast, 0x1E6E0040, 0x88448844); + ast_moutdwm(ast, 0x1E6E0044, 0x24422288); + ast_moutdwm(ast, 0x1E6E0048, 0x22222222); + ast_moutdwm(ast, 0x1E6E004C, 0x22222222); + ast_moutdwm(ast, 0x1E6E0050, 0x80000000); + ast_moutdwm(ast, 0x1E6E0208, 0x00000000); + ast_moutdwm(ast, 0x1E6E0218, 0x00000000); + ast_moutdwm(ast, 0x1E6E0220, 0x00000000); + ast_moutdwm(ast, 0x1E6E0228, 0x00000000); + ast_moutdwm(ast, 0x1E6E0230, 0x00000000); + ast_moutdwm(ast, 0x1E6E02A8, 0x00000000); + ast_moutdwm(ast, 0x1E6E02B0, 0x00000000); + ast_moutdwm(ast, 0x1E6E0240, 0x86000000); + ast_moutdwm(ast, 0x1E6E0244, 0x00008600); + ast_moutdwm(ast, 0x1E6E0248, 0x80000000); + ast_moutdwm(ast, 0x1E6E024C, 0x80808080); +} + +static void ddr_phy_init_2500(struct ast_private *ast) +{ + u32 data, pass, timecnt; + + pass = 0; + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + while (!pass) { + for (timecnt = 0; timecnt < TIMEOUT; timecnt++) { + data = ast_mindwm(ast, 0x1E6E0060) & 0x1; + if (!data) + break; + } + if (timecnt != TIMEOUT) { + data = ast_mindwm(ast, 0x1E6E0300) & 0x000A0000; + if (!data) + pass = 1; + } + if (!pass) { + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + udelay(10); /* delay 10 us */ + ast_moutdwm(ast, 0x1E6E0060, 0x00000005); + } + } + + ast_moutdwm(ast, 0x1E6E0060, 0x00000006); +} + +/* + * Check DRAM Size + * 1Gb : 0x80000000 ~ 0x87FFFFFF + * 2Gb : 0x80000000 ~ 0x8FFFFFFF + * 4Gb : 0x80000000 ~ 0x9FFFFFFF + * 8Gb : 0x80000000 ~ 0xBFFFFFFF + */ +static void check_dram_size_2500(struct ast_private *ast, u32 tRFC) +{ + u32 reg_04, reg_14; + + reg_04 = ast_mindwm(ast, 0x1E6E0004) & 0xfffffffc; + reg_14 = ast_mindwm(ast, 0x1E6E0014) & 0xffffff00; + + ast_moutdwm(ast, 0xA0100000, 0x41424344); + ast_moutdwm(ast, 0x90100000, 0x35363738); + ast_moutdwm(ast, 0x88100000, 0x292A2B2C); + ast_moutdwm(ast, 0x80100000, 0x1D1E1F10); + + /* Check 8Gbit */ + if (ast_mindwm(ast, 0xA0100000) == 0x41424344) { + reg_04 |= 0x03; + reg_14 |= (tRFC >> 24) & 0xFF; + /* Check 4Gbit */ + } else if (ast_mindwm(ast, 0x90100000) == 0x35363738) { + reg_04 |= 0x02; + reg_14 |= (tRFC >> 16) & 0xFF; + /* Check 2Gbit */ + } else if (ast_mindwm(ast, 0x88100000) == 0x292A2B2C) { + reg_04 |= 0x01; + reg_14 |= (tRFC >> 8) & 0xFF; + } else { + reg_14 |= tRFC & 0xFF; + } + ast_moutdwm(ast, 0x1E6E0004, reg_04); + ast_moutdwm(ast, 0x1E6E0014, reg_14); +} + +static void enable_cache_2500(struct ast_private *ast) +{ + u32 reg_04, data; + + reg_04 = ast_mindwm(ast, 0x1E6E0004); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x1000); + + do + data = ast_mindwm(ast, 0x1E6E0004); + while (!(data & 0x80000)); + ast_moutdwm(ast, 0x1E6E0004, reg_04 | 0x400); +} + +static void set_mpll_2500(struct ast_private *ast) +{ + u32 addr, data, param; + + /* Reset MMC */ + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); + ast_moutdwm(ast, 0x1E6E0034, 0x00020080); + for (addr = 0x1e6e0004; addr < 0x1e6e0090;) { + ast_moutdwm(ast, addr, 0x0); + addr += 4; + } + ast_moutdwm(ast, 0x1E6E0034, 0x00020000); + + ast_moutdwm(ast, 0x1E6E2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1E6E2070) & 0x00800000; + if (data) { + /* CLKIN = 25MHz */ + param = 0x930023E0; + ast_moutdwm(ast, 0x1E6E2160, 0x00011320); + } else { + /* CLKIN = 24MHz */ + param = 0x93002400; + } + ast_moutdwm(ast, 0x1E6E2020, param); + udelay(100); +} + +static void reset_mmc_2500(struct ast_private *ast) +{ + ast_moutdwm(ast, 0x1E78505C, 0x00000004); + ast_moutdwm(ast, 0x1E785044, 0x00000001); + ast_moutdwm(ast, 0x1E785048, 0x00004755); + ast_moutdwm(ast, 0x1E78504C, 0x00000013); + mdelay(100); + ast_moutdwm(ast, 0x1E785054, 0x00000077); + ast_moutdwm(ast, 0x1E6E0000, 0xFC600309); +} + +static void ddr3_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + ast_moutdwm(ast, 0x1E6E0004, 0x00000303); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, + ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x02492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x00001001); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x00020091); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static void ddr4_init_2500(struct ast_private *ast, const u32 *ddr_table) +{ + u32 data, data2, pass, retrycnt; + u32 ddr_vref, phy_vref; + u32 min_ddr_vref = 0, min_phy_vref = 0; + u32 max_ddr_vref = 0, max_phy_vref = 0; + + ast_moutdwm(ast, 0x1E6E0004, 0x00000313); + ast_moutdwm(ast, 0x1E6E0010, ddr_table[REGIDX_010]); + ast_moutdwm(ast, 0x1E6E0014, ddr_table[REGIDX_014]); + ast_moutdwm(ast, 0x1E6E0018, ddr_table[REGIDX_018]); + ast_moutdwm(ast, 0x1E6E0020, ddr_table[REGIDX_020]); /* MODEREG4/6 */ + ast_moutdwm(ast, 0x1E6E0024, ddr_table[REGIDX_024]); /* MODEREG5 */ + ast_moutdwm(ast, 0x1E6E002C, + ddr_table[REGIDX_02C] | 0x100); /* MODEREG0/2 */ + ast_moutdwm(ast, 0x1E6E0030, ddr_table[REGIDX_030]); /* MODEREG1/3 */ + + /* DDR PHY Setting */ + ast_moutdwm(ast, 0x1E6E0200, 0x42492AAE); + ast_moutdwm(ast, 0x1E6E0204, 0x09002000); + ast_moutdwm(ast, 0x1E6E020C, 0x55E00B0B); + ast_moutdwm(ast, 0x1E6E0210, 0x20000000); + ast_moutdwm(ast, 0x1E6E0214, ddr_table[REGIDX_214]); + ast_moutdwm(ast, 0x1E6E02E0, ddr_table[REGIDX_2E0]); + ast_moutdwm(ast, 0x1E6E02E4, ddr_table[REGIDX_2E4]); + ast_moutdwm(ast, 0x1E6E02E8, ddr_table[REGIDX_2E8]); + ast_moutdwm(ast, 0x1E6E02EC, ddr_table[REGIDX_2EC]); + ast_moutdwm(ast, 0x1E6E02F0, ddr_table[REGIDX_2F0]); + ast_moutdwm(ast, 0x1E6E02F4, ddr_table[REGIDX_2F4]); + ast_moutdwm(ast, 0x1E6E02F8, ddr_table[REGIDX_2F8]); + ast_moutdwm(ast, 0x1E6E0290, 0x00100008); + ast_moutdwm(ast, 0x1E6E02C4, 0x3C183C3C); + ast_moutdwm(ast, 0x1E6E02C8, 0x00631E0E); + + /* Controller Setting */ + ast_moutdwm(ast, 0x1E6E0034, 0x0001A991); + + /* Train PHY Vref first */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + max_phy_vref = 0x0; + pass = 0; + ast_moutdwm(ast, 0x1E6E02C0, 0x00001C06); + for (phy_vref = 0x40; phy_vref < 0x80; phy_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02CC, + phy_vref | (phy_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + data = ast_mindwm(ast, 0x1E6E03D0); + data2 = data >> 8; + data = data & 0xff; + if (data > data2) + data = data2; + if (max_phy_vref < data) { + max_phy_vref = data; + min_phy_vref = phy_vref; + } + } else if (pass > 0) + break; + } + } + ast_moutdwm(ast, 0x1E6E02CC, min_phy_vref | (min_phy_vref << 8)); + + /* Train DDR Vref next */ + pass = 0; + + for (retrycnt = 0; retrycnt < 4 && pass == 0; retrycnt++) { + min_ddr_vref = 0xFF; + max_ddr_vref = 0x0; + pass = 0; + for (ddr_vref = 0x00; ddr_vref < 0x40; ddr_vref++) { + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ast_moutdwm(ast, 0x1E6E02C0, + 0x00000006 | (ddr_vref << 8)); + /* Fire DFI Init */ + ddr_phy_init_2500(ast); + ast_moutdwm(ast, 0x1E6E000C, 0x00005C01); + if (cbr_test_2500(ast)) { + pass++; + if (min_ddr_vref > ddr_vref) + min_ddr_vref = ddr_vref; + if (max_ddr_vref < ddr_vref) + max_ddr_vref = ddr_vref; + } else if (pass != 0) + break; + } + } + + ast_moutdwm(ast, 0x1E6E000C, 0x00000000); + ast_moutdwm(ast, 0x1E6E0060, 0x00000000); + ddr_vref = (min_ddr_vref + max_ddr_vref + 1) >> 1; + ast_moutdwm(ast, 0x1E6E02C0, 0x00000006 | (ddr_vref << 8)); + + /* Wait DDR PHY init done */ + ddr_phy_init_2500(ast); + + ast_moutdwm(ast, 0x1E6E0120, ddr_table[REGIDX_PLL]); + ast_moutdwm(ast, 0x1E6E000C, 0x42AA5C81); + ast_moutdwm(ast, 0x1E6E0034, 0x0001AF93); + + check_dram_size_2500(ast, ddr_table[REGIDX_RFC]); + enable_cache_2500(ast); + ast_moutdwm(ast, 0x1E6E001C, 0x00000008); + ast_moutdwm(ast, 0x1E6E0038, 0xFFFFFF00); +} + +static bool ast_dram_init_2500(struct ast_private *ast) +{ + u32 data; + u32 max_tries = 5; + + do { + if (max_tries-- == 0) + return false; + set_mpll_2500(ast); + reset_mmc_2500(ast); + ddr_init_common_2500(ast); + + data = ast_mindwm(ast, 0x1E6E2070); + if (data & 0x01000000) + ddr4_init_2500(ast, ast2500_ddr4_1600_timing_table); + else + ddr3_init_2500(ast, ast2500_ddr3_1600_timing_table); + } while (!ddr_test_2500(ast)); + + ast_moutdwm(ast, 0x1E6E2040, ast_mindwm(ast, 0x1E6E2040) | 0x41); + + /* Patch code */ + data = ast_mindwm(ast, 0x1E6E200C) & 0xF9FFFFFF; + ast_moutdwm(ast, 0x1E6E200C, data | 0x10000000); + + return true; +} + +void ast_patch_ahb_2500(struct ast_private *ast) +{ + u32 data; + + /* Clear bus lock condition */ + ast_moutdwm(ast, 0x1e600000, 0xAEED1A03); + ast_moutdwm(ast, 0x1e600084, 0x00010000); + ast_moutdwm(ast, 0x1e600088, 0x00000000); + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1e6e2070); + if (data & 0x08000000) { /* check fast reset */ + /* + * If "Fast restet" is enabled for ARM-ICE debugger, + * then WDT needs to enable, that + * WDT04 is WDT#1 Reload reg. + * WDT08 is WDT#1 counter restart reg to avoid system deadlock + * WDT0C is WDT#1 control reg + * [6:5]:= 01:Full chip + * [4]:= 1:1MHz clock source + * [1]:= 1:WDT will be cleeared and disabled after timeout occurs + * [0]:= 1:WDT enable + */ + ast_moutdwm(ast, 0x1E785004, 0x00000010); + ast_moutdwm(ast, 0x1E785008, 0x00004755); + ast_moutdwm(ast, 0x1E78500c, 0x00000033); + udelay(1000); + } + do { + ast_moutdwm(ast, 0x1e6e2000, 0x1688A8A8); + data = ast_mindwm(ast, 0x1e6e2000); + } while (data != 1); + ast_moutdwm(ast, 0x1e6e207c, 0x08000000); /* clear fast reset */ +} + +void ast_post_chip_2500(struct drm_device *dev) +{ + struct ast_private *ast = to_ast_private(dev); + u32 temp; + u8 reg; + + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + if ((reg & AST_VRAM_INIT_STATUS_MASK) == 0) { /* vga only */ + /* Clear bus lock condition */ + ast_patch_ahb_2500(ast); + + /* Disable watchdog */ + ast_moutdwm(ast, 0x1E78502C, 0x00000000); + ast_moutdwm(ast, 0x1E78504C, 0x00000000); + + /* + * Reset USB port to patch USB unknown device issue + * SCU90 is Multi-function Pin Control #5 + * [29]:= 1:Enable USB2.0 Host port#1 (that the mutually shared USB2.0 Hub + * port). + * SCU94 is Multi-function Pin Control #6 + * [14:13]:= 1x:USB2.0 Host2 controller + * SCU70 is Hardware Strap reg + * [23]:= 1:CLKIN is 25MHz and USBCK1 = 24/48 MHz (determined by + * [18]: 0(24)/1(48) MHz) + * SCU7C is Write clear reg to SCU70 + * [23]:= write 1 and then SCU70[23] will be clear as 0b. + */ + ast_moutdwm(ast, 0x1E6E2090, 0x20000000); + ast_moutdwm(ast, 0x1E6E2094, 0x00004000); + if (ast_mindwm(ast, 0x1E6E2070) & 0x00800000) { + ast_moutdwm(ast, 0x1E6E207C, 0x00800000); + mdelay(100); + ast_moutdwm(ast, 0x1E6E2070, 0x00800000); + } + /* Modify eSPI reset pin */ + temp = ast_mindwm(ast, 0x1E6E2070); + if (temp & 0x02000000) + ast_moutdwm(ast, 0x1E6E207C, 0x00004000); + + /* Slow down CPU/AHB CLK in VGA only mode */ + temp = ast_read32(ast, 0x12008); + temp |= 0x73; + ast_write32(ast, 0x12008, temp); + + if (!ast_dram_init_2500(ast)) + drm_err(dev, "DRAM init failed !\n"); + + temp = ast_mindwm(ast, 0x1e6e2040); + ast_moutdwm(ast, 0x1e6e2040, temp | 0x40); + } + + /* wait ready */ + do { + reg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd0, 0xff); + } while ((reg & 0x40) == 0); +} diff --git a/drivers/gpu/drm/loongson/ast_old/ast_tables.h b/drivers/gpu/drm/loongson/ast_old/ast_tables.h new file mode 100644 index 000000000000..e92a17a5cf27 --- /dev/null +++ b/drivers/gpu/drm/loongson/ast_old/ast_tables.h @@ -0,0 +1,342 @@ +/* + * Copyright (c) 2005 ASPEED Technology Inc. + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that + * copyright notice and this permission notice appear in supporting + * documentation, and that the name of the authors not be used in + * advertising or publicity pertaining to distribution of the software without + * specific, written prior permission. The authors makes no representations + * about the suitability of this software for any purpose. It is provided + * "as is" without express or implied warranty. + * + * THE AUTHORS DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR + * PERFORMANCE OF THIS SOFTWARE. + */ +/* Ported from xf86-video-ast driver */ + +#ifndef AST_TABLES_H +#define AST_TABLES_H + +/* Std. Table Index Definition */ +#define TextModeIndex 0 +#define EGAModeIndex 1 +#define VGAModeIndex 2 +#define HiCModeIndex 3 +#define TrueCModeIndex 4 + +#define Charx8Dot 0x00000001 +#define HalfDCLK 0x00000002 +#define DoubleScanMode 0x00000004 +#define LineCompareOff 0x00000008 +#define HBorder 0x00000020 +#define VBorder 0x00000010 +#define WideScreenMode 0x00000100 +#define NewModeInfo 0x00000200 +#define NHSync 0x00000400 +#define PHSync 0x00000800 +#define NVSync 0x00001000 +#define PVSync 0x00002000 +#define SyncPP (PVSync | PHSync) +#define SyncPN (PVSync | NHSync) +#define SyncNP (NVSync | PHSync) +#define SyncNN (NVSync | NHSync) +#define AST2500PreCatchCRT 0x00004000 + +/* DCLK Index */ +#define VCLK25_175 0x00 +#define VCLK28_322 0x01 +#define VCLK31_5 0x02 +#define VCLK36 0x03 +#define VCLK40 0x04 +#define VCLK49_5 0x05 +#define VCLK50 0x06 +#define VCLK56_25 0x07 +#define VCLK65 0x08 +#define VCLK75 0x09 +#define VCLK78_75 0x0A +#define VCLK94_5 0x0B +#define VCLK108 0x0C +#define VCLK135 0x0D +#define VCLK157_5 0x0E +#define VCLK162 0x0F +#define VCLK154 0x10 +#define VCLK83_5 0x11 +#define VCLK106_5 0x12 +#define VCLK146_25 0x13 +#define VCLK148_5 0x14 +#define VCLK71 0x15 +#define VCLK88_75 0x16 +#define VCLK119 0x17 +#define VCLK85_5 0x18 +#define VCLK97_75 0x19 +#define VCLK118_25 0x1A + +static const struct ast_vbios_dclk_info dclk_table[] = { + { 0x2C, 0xE7, 0x03 }, /* 00: VCLK25_175 */ + { 0x95, 0x62, 0x03 }, /* 01: VCLK28_322 */ + { 0x67, 0x63, 0x01 }, /* 02: VCLK31_5 */ + { 0x76, 0x63, 0x01 }, /* 03: VCLK36 */ + { 0xEE, 0x67, 0x01 }, /* 04: VCLK40 */ + { 0x82, 0x62, 0x01 }, /* 05: VCLK49_5 */ + { 0xC6, 0x64, 0x01 }, /* 06: VCLK50 */ + { 0x94, 0x62, 0x01 }, /* 07: VCLK56_25 */ + { 0x80, 0x64, 0x00 }, /* 08: VCLK65 */ + { 0x7B, 0x63, 0x00 }, /* 09: VCLK75 */ + { 0x67, 0x62, 0x00 }, /* 0A: VCLK78_75 */ + { 0x7C, 0x62, 0x00 }, /* 0B: VCLK94_5 */ + { 0x8E, 0x62, 0x00 }, /* 0C: VCLK108 */ + { 0x85, 0x24, 0x00 }, /* 0D: VCLK135 */ + { 0x67, 0x22, 0x00 }, /* 0E: VCLK157_5 */ + { 0x6A, 0x22, 0x00 }, /* 0F: VCLK162 */ + { 0x4d, 0x4c, 0x80 }, /* 10: VCLK154 */ + { 0x68, 0x6f, 0x80 }, /* 11: VCLK83.5 */ + { 0x28, 0x49, 0x80 }, /* 12: VCLK106.5 */ + { 0x37, 0x49, 0x80 }, /* 13: VCLK146.25 */ + { 0x1f, 0x45, 0x80 }, /* 14: VCLK148.5 */ + { 0x47, 0x6c, 0x80 }, /* 15: VCLK71 */ + { 0x25, 0x65, 0x80 }, /* 16: VCLK88.75 */ + { 0x77, 0x58, 0x80 }, /* 17: VCLK119 */ + { 0x32, 0x67, 0x80 }, /* 18: VCLK85_5 */ + { 0x6a, 0x6d, 0x80 }, /* 19: VCLK97_75 */ + { 0x3b, 0x2c, 0x81 }, /* 1A: VCLK118_25 */ +}; + +static const struct ast_vbios_dclk_info dclk_table_ast2500[] = { + { 0x2C, 0xE7, 0x03 }, /* 00: VCLK25_175 */ + { 0x95, 0x62, 0x03 }, /* 01: VCLK28_322 */ + { 0x67, 0x63, 0x01 }, /* 02: VCLK31_5 */ + { 0x76, 0x63, 0x01 }, /* 03: VCLK36 */ + { 0xEE, 0x67, 0x01 }, /* 04: VCLK40 */ + { 0x82, 0x62, 0x01 }, /* 05: VCLK49_5 */ + { 0xC6, 0x64, 0x01 }, /* 06: VCLK50 */ + { 0x94, 0x62, 0x01 }, /* 07: VCLK56_25 */ + { 0x80, 0x64, 0x00 }, /* 08: VCLK65 */ + { 0x7B, 0x63, 0x00 }, /* 09: VCLK75 */ + { 0x67, 0x62, 0x00 }, /* 0A: VCLK78_75 */ + { 0x7C, 0x62, 0x00 }, /* 0B: VCLK94_5 */ + { 0x8E, 0x62, 0x00 }, /* 0C: VCLK108 */ + { 0x85, 0x24, 0x00 }, /* 0D: VCLK135 */ + { 0x67, 0x22, 0x00 }, /* 0E: VCLK157_5 */ + { 0x6A, 0x22, 0x00 }, /* 0F: VCLK162 */ + { 0x4d, 0x4c, 0x80 }, /* 10: VCLK154 */ + { 0x68, 0x6f, 0x80 }, /* 11: VCLK83.5 */ + { 0x28, 0x49, 0x80 }, /* 12: VCLK106.5 */ + { 0x37, 0x49, 0x80 }, /* 13: VCLK146.25 */ + { 0x1f, 0x45, 0x80 }, /* 14: VCLK148.5 */ + { 0x47, 0x6c, 0x80 }, /* 15: VCLK71 */ + { 0x25, 0x65, 0x80 }, /* 16: VCLK88.75 */ + { 0x58, 0x01, 0x42 }, /* 17: VCLK119 */ + { 0x32, 0x67, 0x80 }, /* 18: VCLK85_5 */ + { 0x6a, 0x6d, 0x80 }, /* 19: VCLK97_75 */ + { 0x44, 0x20, 0x43 }, /* 1A: VCLK118_25 */ +}; + +static const struct ast_vbios_stdtable vbios_stdtable[] = { + /* MD_2_3_400 */ + { 0x67, + { 0x00, 0x03, 0x00, 0x02 }, + { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0xbf, 0x1f, 0x00, + 0x4f, 0x0d, 0x0e, 0x00, 0x00, 0x00, 0x00, 0x9c, 0x8e, + 0x8f, 0x28, 0x1f, 0x96, 0xb9, 0xa3, 0xff }, + { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, 0x38, 0x39, + 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x0c, 0x00, 0x0f, 0x08 }, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0e, 0x00, 0xff } }, + /* Mode12/ExtEGATable */ + { 0xe3, + { 0x01, 0x0f, 0x00, 0x06 }, + { 0x5f, 0x4f, 0x50, 0x82, 0x55, 0x81, 0x0b, 0x3e, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe9, 0x8b, + 0xdf, 0x28, 0x00, 0xe7, 0x04, 0xe3, 0xff }, + { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x14, 0x07, 0x38, 0x39, + 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, 0x01, 0x00, 0x0f, 0x00 }, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, 0xff } }, + /* ExtVGATable */ + { 0x2f, + { 0x01, 0x0f, 0x00, 0x0e }, + { 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xea, 0x8c, + 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3, 0xff }, + { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x01, 0x00, 0x00, 0x00 }, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x05, 0x0f, 0xff } }, + /* ExtHiCTable */ + { 0x2f, + { 0x01, 0x0f, 0x00, 0x0e }, + { 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xea, 0x8c, + 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3, 0xff }, + { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x01, 0x00, 0x00, 0x00 }, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, 0xff } }, + /* ExtTrueCTable */ + { 0x2f, + { 0x01, 0x0f, 0x00, 0x0e }, + { 0x5f, 0x4f, 0x50, 0x82, 0x54, 0x80, 0x0b, 0x3e, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xea, 0x8c, + 0xdf, 0x28, 0x40, 0xe7, 0x04, 0xa3, 0xff }, + { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, + 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x01, 0x00, 0x00, 0x00 }, + { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x0f, 0xff } }, +}; + +static const struct ast_vbios_enhtable res_640x480[] = { + { 800, 640, 8, 96, 525, 480, 2, 2, VCLK25_175, /* 60Hz */ + (SyncNN | HBorder | VBorder | Charx8Dot), 60, 1, 0x2E }, + { 832, 640, 16, 40, 520, 480, 1, 3, VCLK31_5, /* 72Hz */ + (SyncNN | HBorder | VBorder | Charx8Dot), 72, 2, 0x2E }, + { 840, 640, 16, 64, 500, 480, 1, 3, VCLK31_5, /* 75Hz */ + (SyncNN | Charx8Dot), 75, 3, 0x2E }, + { 832, 640, 56, 56, 509, 480, 1, 3, VCLK36, /* 85Hz */ + (SyncNN | Charx8Dot), 85, 4, 0x2E }, + { 832, 640, 56, 56, 509, 480, 1, 3, VCLK36, /* end */ + (SyncNN | Charx8Dot), 0xFF, 4, 0x2E }, +}; + +static const struct ast_vbios_enhtable res_800x600[] = { + { 1024, 800, 24, 72, 625, 600, 1, 2, VCLK36, /* 56Hz */ + (SyncPP | Charx8Dot), 56, 1, 0x30 }, + { 1056, 800, 40, 128, 628, 600, 1, 4, VCLK40, /* 60Hz */ + (SyncPP | Charx8Dot), 60, 2, 0x30 }, + { 1040, 800, 56, 120, 666, 600, 37, 6, VCLK50, /* 72Hz */ + (SyncPP | Charx8Dot), 72, 3, 0x30 }, + { 1056, 800, 16, 80, 625, 600, 1, 3, VCLK49_5, /* 75Hz */ + (SyncPP | Charx8Dot), 75, 4, 0x30 }, + { 1048, 800, 32, 64, 631, 600, 1, 3, VCLK56_25, /* 85Hz */ + (SyncPP | Charx8Dot), 84, 5, 0x30 }, + { 1048, 800, 32, 64, 631, 600, 1, 3, VCLK56_25, /* end */ + (SyncPP | Charx8Dot), 0xFF, 5, 0x30 }, +}; + +static const struct ast_vbios_enhtable res_1024x768[] = { + { 1344, 1024, 24, 136, 806, 768, 3, 6, VCLK65, /* 60Hz */ + (SyncNN | Charx8Dot), 60, 1, 0x31 }, + { 1328, 1024, 24, 136, 806, 768, 3, 6, VCLK75, /* 70Hz */ + (SyncNN | Charx8Dot), 70, 2, 0x31 }, + { 1312, 1024, 16, 96, 800, 768, 1, 3, VCLK78_75, /* 75Hz */ + (SyncPP | Charx8Dot), 75, 3, 0x31 }, + { 1376, 1024, 48, 96, 808, 768, 1, 3, VCLK94_5, /* 85Hz */ + (SyncPP | Charx8Dot), 84, 4, 0x31 }, + { 1376, 1024, 48, 96, 808, 768, 1, 3, VCLK94_5, /* end */ + (SyncPP | Charx8Dot), 0xFF, 4, 0x31 }, +}; + +static const struct ast_vbios_enhtable res_1280x1024[] = { + { 1688, 1280, 48, 112, 1066, 1024, 1, 3, VCLK108, /* 60Hz */ + (SyncPP | Charx8Dot), 60, 1, 0x32 }, + { 1688, 1280, 16, 144, 1066, 1024, 1, 3, VCLK135, /* 75Hz */ + (SyncPP | Charx8Dot), 75, 2, 0x32 }, + { 1728, 1280, 64, 160, 1072, 1024, 1, 3, VCLK157_5, /* 85Hz */ + (SyncPP | Charx8Dot), 85, 3, 0x32 }, + { 1728, 1280, 64, 160, 1072, 1024, 1, 3, VCLK157_5, /* end */ + (SyncPP | Charx8Dot), 0xFF, 3, 0x32 }, +}; + +static const struct ast_vbios_enhtable res_1600x1200[] = { + { 2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* 60Hz */ + (SyncPP | Charx8Dot), 60, 1, 0x33 }, + { 2160, 1600, 64, 192, 1250, 1200, 1, 3, VCLK162, /* end */ + (SyncPP | Charx8Dot), 0xFF, 1, 0x33 }, +}; + +static const struct ast_vbios_enhtable res_1152x864[] = { + { 1600, 1152, 64, 128, 900, 864, 1, 3, VCLK108, /* 75Hz */ + (SyncPP | Charx8Dot | NewModeInfo), 75, 1, 0x3B }, + { 1600, 1152, 64, 128, 900, 864, 1, 3, VCLK108, /* end */ + (SyncPP | Charx8Dot | NewModeInfo), 0xFF, 1, 0x3B }, +}; + +/* 16:9 */ +static const struct ast_vbios_enhtable res_1360x768[] = { + { 1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* 60Hz */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 60, 1, 0x39 }, + { 1792, 1360, 64, 112, 795, 768, 3, 6, VCLK85_5, /* end */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 0xFF, 1, 0x39 }, +}; + +static const struct ast_vbios_enhtable res_1600x900[] = { + { 1760, 1600, 48, 32, 926, 900, 3, 5, VCLK97_75, /* 60Hz CVT RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x3A }, + { 2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 60, 2, 0x3A }, + { 2112, 1600, 88, 168, 934, 900, 3, 5, VCLK118_25, /* 60Hz CVT */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 0xFF, 2, 0x3A }, +}; + +static const struct ast_vbios_enhtable res_1920x1080[] = { + { 2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x38 }, + { 2200, 1920, 88, 44, 1125, 1080, 4, 5, VCLK148_5, /* 60Hz */ + (SyncPP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 0xFF, 1, 0x38 }, +}; + +/* 16:10 */ +static const struct ast_vbios_enhtable res_1280x800[] = { + { 1440, 1280, 48, 32, 823, 800, 3, 6, VCLK71, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x35 }, + { 1680, 1280, 72, 128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 60, 2, 0x35 }, + { 1680, 1280, 72, 128, 831, 800, 3, 6, VCLK83_5, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 0xFF, 2, 0x35 }, + +}; + +static const struct ast_vbios_enhtable res_1440x900[] = { + { 1600, 1440, 48, 32, 926, 900, 3, 6, VCLK88_75, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x36 }, + { 1904, 1440, 80, 152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 60, 2, 0x36 }, + { 1904, 1440, 80, 152, 934, 900, 3, 6, VCLK106_5, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 0xFF, 2, 0x36 }, +}; + +static const struct ast_vbios_enhtable res_1680x1050[] = { + { 1840, 1680, 48, 32, 1080, 1050, 3, 6, VCLK119, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x37 }, + { 2240, 1680, 104, 176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 60, 2, 0x37 }, + { 2240, 1680, 104, 176, 1089, 1050, 3, 6, VCLK146_25, /* 60Hz */ + (SyncPN | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo), + 0xFF, 2, 0x37 }, +}; + +static const struct ast_vbios_enhtable res_1920x1200[] = { + { 2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB*/ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 60, 1, 0x34 }, + { 2080, 1920, 48, 32, 1235, 1200, 3, 6, VCLK154, /* 60Hz RB */ + (SyncNP | Charx8Dot | LineCompareOff | WideScreenMode | NewModeInfo | + AST2500PreCatchCRT), + 0xFF, 1, 0x34 }, +}; + +#endif -- 2.33.0

2 1

[PATCH openEuler-22.03-LTS-SP1] ocfs2: reserve space for inline xattr before attaching reflink tree
by Yi Yang 01 Nov '24

01 Nov '24

From: Gautham Ananthakrishna <gautham.ananthakrishna(a)oracle.com> stable inclusion from stable-v5.10.227 commit aac31d654a0a31cb0d2fa36ae694f4e164a52707 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRA7 CVE: CVE-2024-49958 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 5ca60b86f57a4d9648f68418a725b3a7de2816b0 upstream. One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@o… Fixes: ef962df057aa ("ocfs2: xattr: fix inlined xattr reflink") Signed-off-by: Gautham Ananthakrishna <gautham.ananthakrishna(a)oracle.com> Reviewed-by: Joseph Qi <joseph.qi(a)linux.alibaba.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Changwei Ge <gechangwei(a)live.cn> Cc: Gang He <ghe(a)suse.com> Cc: Jun Piao <piaojun(a)huawei.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- fs/ocfs2/refcounttree.c | 26 ++++++++++++++++++++++++-- fs/ocfs2/xattr.c | 11 +---------- 2 files changed, 25 insertions(+), 12 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 3b397fa9c9e8..85d25c211c87 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -27,6 +27,7 @@ #include "namei.h" #include "ocfs2_trace.h" #include "file.h" +#include "symlink.h" #include <linux/bio.h> #include <linux/blkdev.h> @@ -4184,8 +4185,9 @@ static int __ocfs2_reflink(struct dentry *old_dentry, int ret; struct inode *inode = d_inode(old_dentry); struct buffer_head *new_bh = NULL; + struct ocfs2_inode_info *oi = OCFS2_I(inode); - if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) { + if (oi->ip_flags & OCFS2_INODE_SYSTEM_FILE) { ret = -EINVAL; mlog_errno(ret); goto out; @@ -4211,6 +4213,26 @@ static int __ocfs2_reflink(struct dentry *old_dentry, goto out_unlock; } + if ((oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) && + (oi->ip_dyn_features & OCFS2_INLINE_XATTR_FL)) { + /* + * Adjust extent record count to reserve space for extended attribute. + * Inline data count had been adjusted in ocfs2_duplicate_inline_data(). + */ + struct ocfs2_inode_info *new_oi = OCFS2_I(new_inode); + + if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) && + !(ocfs2_inode_is_fast_symlink(new_inode))) { + struct ocfs2_dinode *new_di = (struct ocfs2_dinode *)new_bh->b_data; + struct ocfs2_dinode *old_di = (struct ocfs2_dinode *)old_bh->b_data; + struct ocfs2_extent_list *el = &new_di->id2.i_list; + int inline_size = le16_to_cpu(old_di->i_xattr_inline_size); + + le16_add_cpu(&el->l_count, -(inline_size / + sizeof(struct ocfs2_extent_rec))); + } + } + ret = ocfs2_create_reflink_node(inode, old_bh, new_inode, new_bh, preserve); if (ret) { @@ -4218,7 +4240,7 @@ static int __ocfs2_reflink(struct dentry *old_dentry, goto inode_unlock; } - if (OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_XATTR_FL) { + if (oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) { ret = ocfs2_reflink_xattrs(inode, old_bh, new_inode, new_bh, preserve); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 495fb5b7a087..42368577786e 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -6526,16 +6526,7 @@ static int ocfs2_reflink_xattr_inline(struct ocfs2_xattr_reflink *args) } new_oi = OCFS2_I(args->new_inode); - /* - * Adjust extent record count to reserve space for extended attribute. - * Inline data count had been adjusted in ocfs2_duplicate_inline_data(). - */ - if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) && - !(ocfs2_inode_is_fast_symlink(args->new_inode))) { - struct ocfs2_extent_list *el = &new_di->id2.i_list; - le16_add_cpu(&el->l_count, -(inline_size / - sizeof(struct ocfs2_extent_rec))); - } + spin_lock(&new_oi->ip_lock); new_oi->ip_dyn_features |= OCFS2_HAS_XATTR_FL | OCFS2_INLINE_XATTR_FL; new_di->i_dyn_features = cpu_to_le16(new_oi->ip_dyn_features); -- 2.25.1

2 1

[PATCH OLK-6.6] ocfs2: reserve space for inline xattr before attaching reflink tree
by Yi Yang 01 Nov '24

01 Nov '24

From: Gautham Ananthakrishna <gautham.ananthakrishna(a)oracle.com> stable inclusion from stable-v6.6.55 commit 637c00e06564a945e9d0edb3d78d362d64935f9f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRA7 CVE: CVE-2024-49958 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 5ca60b86f57a4d9648f68418a725b3a7de2816b0 upstream. One of our customers reported a crash and a corrupted ocfs2 filesystem. The crash was due to the detection of corruption. Upon troubleshooting, the fsck -fn output showed the below corruption [EXTENT_LIST_FREE] Extent list in owner 33080590 claims 230 as the next free chain record, but fsck believes the largest valid value is 227. Clamp the next record value? n The stat output from the debugfs.ocfs2 showed the following corruption where the "Next Free Rec:" had overshot the "Count:" in the root metadata block. Inode: 33080590 Mode: 0640 Generation: 2619713622 (0x9c25a856) FS Generation: 904309833 (0x35e6ac49) CRC32: 00000000 ECC: 0000 Type: Regular Attr: 0x0 Flags: Valid Dynamic Features: (0x16) HasXattr InlineXattr Refcounted Extended Attributes Block: 0 Extended Attributes Inline Size: 256 User: 0 (root) Group: 0 (root) Size: 281320357888 Links: 1 Clusters: 141738 ctime: 0x66911b56 0x316edcb8 -- Fri Jul 12 06:02:30.829349048 2024 atime: 0x66911d6b 0x7f7a28d -- Fri Jul 12 06:11:23.133669517 2024 mtime: 0x66911b56 0x12ed75d7 -- Fri Jul 12 06:02:30.317552087 2024 dtime: 0x0 -- Wed Dec 31 17:00:00 1969 Refcount Block: 2777346 Last Extblk: 2886943 Orphan Slot: 0 Sub Alloc Slot: 0 Sub Alloc Bit: 14 Tree Depth: 1 Count: 227 Next Free Rec: 230 ## Offset Clusters Block# 0 0 2310 2776351 1 2310 2139 2777375 2 4449 1221 2778399 3 5670 731 2779423 4 6401 566 2780447 ....... .... ....... ....... .... ....... The issue was in the reflink workfow while reserving space for inline xattr. The problematic function is ocfs2_reflink_xattr_inline(). By the time this function is called the reflink tree is already recreated at the destination inode from the source inode. At this point, this function reserves space for inline xattrs at the destination inode without even checking if there is space at the root metadata block. It simply reduces the l_count from 243 to 227 thereby making space of 256 bytes for inline xattr whereas the inode already has extents beyond this index (in this case up to 230), thereby causing corruption. The fix for this is to reserve space for inline metadata at the destination inode before the reflink tree gets recreated. The customer has verified the fix. Link: https://lkml.kernel.org/r/20240918063844.1830332-1-gautham.ananthakrishna@o… Fixes: ef962df057aa ("ocfs2: xattr: fix inlined xattr reflink") Signed-off-by: Gautham Ananthakrishna <gautham.ananthakrishna(a)oracle.com> Reviewed-by: Joseph Qi <joseph.qi(a)linux.alibaba.com> Cc: Mark Fasheh <mark(a)fasheh.com> Cc: Joel Becker <jlbec(a)evilplan.org> Cc: Junxiao Bi <junxiao.bi(a)oracle.com> Cc: Changwei Ge <gechangwei(a)live.cn> Cc: Gang He <ghe(a)suse.com> Cc: Jun Piao <piaojun(a)huawei.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- fs/ocfs2/refcounttree.c | 26 ++++++++++++++++++++++++-- fs/ocfs2/xattr.c | 11 +---------- 2 files changed, 25 insertions(+), 12 deletions(-) diff --git a/fs/ocfs2/refcounttree.c b/fs/ocfs2/refcounttree.c index 3f80a56d0d60..c71b79b5fb9b 100644 --- a/fs/ocfs2/refcounttree.c +++ b/fs/ocfs2/refcounttree.c @@ -25,6 +25,7 @@ #include "namei.h" #include "ocfs2_trace.h" #include "file.h" +#include "symlink.h" #include <linux/bio.h> #include <linux/blkdev.h> @@ -4155,8 +4156,9 @@ static int __ocfs2_reflink(struct dentry *old_dentry, int ret; struct inode *inode = d_inode(old_dentry); struct buffer_head *new_bh = NULL; + struct ocfs2_inode_info *oi = OCFS2_I(inode); - if (OCFS2_I(inode)->ip_flags & OCFS2_INODE_SYSTEM_FILE) { + if (oi->ip_flags & OCFS2_INODE_SYSTEM_FILE) { ret = -EINVAL; mlog_errno(ret); goto out; @@ -4182,6 +4184,26 @@ static int __ocfs2_reflink(struct dentry *old_dentry, goto out_unlock; } + if ((oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) && + (oi->ip_dyn_features & OCFS2_INLINE_XATTR_FL)) { + /* + * Adjust extent record count to reserve space for extended attribute. + * Inline data count had been adjusted in ocfs2_duplicate_inline_data(). + */ + struct ocfs2_inode_info *new_oi = OCFS2_I(new_inode); + + if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) && + !(ocfs2_inode_is_fast_symlink(new_inode))) { + struct ocfs2_dinode *new_di = (struct ocfs2_dinode *)new_bh->b_data; + struct ocfs2_dinode *old_di = (struct ocfs2_dinode *)old_bh->b_data; + struct ocfs2_extent_list *el = &new_di->id2.i_list; + int inline_size = le16_to_cpu(old_di->i_xattr_inline_size); + + le16_add_cpu(&el->l_count, -(inline_size / + sizeof(struct ocfs2_extent_rec))); + } + } + ret = ocfs2_create_reflink_node(inode, old_bh, new_inode, new_bh, preserve); if (ret) { @@ -4189,7 +4211,7 @@ static int __ocfs2_reflink(struct dentry *old_dentry, goto inode_unlock; } - if (OCFS2_I(inode)->ip_dyn_features & OCFS2_HAS_XATTR_FL) { + if (oi->ip_dyn_features & OCFS2_HAS_XATTR_FL) { ret = ocfs2_reflink_xattrs(inode, old_bh, new_inode, new_bh, preserve); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 29d53d1d1476..1cc288918071 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -6520,16 +6520,7 @@ static int ocfs2_reflink_xattr_inline(struct ocfs2_xattr_reflink *args) } new_oi = OCFS2_I(args->new_inode); - /* - * Adjust extent record count to reserve space for extended attribute. - * Inline data count had been adjusted in ocfs2_duplicate_inline_data(). - */ - if (!(new_oi->ip_dyn_features & OCFS2_INLINE_DATA_FL) && - !(ocfs2_inode_is_fast_symlink(args->new_inode))) { - struct ocfs2_extent_list *el = &new_di->id2.i_list; - le16_add_cpu(&el->l_count, -(inline_size / - sizeof(struct ocfs2_extent_rec))); - } + spin_lock(&new_oi->ip_lock); new_oi->ip_dyn_features |= OCFS2_HAS_XATTR_FL | OCFS2_INLINE_XATTR_FL; new_di->i_dyn_features = cpu_to_le16(new_oi->ip_dyn_features); -- 2.25.1

2 1

[openeuler:OLK-5.10 20942/30000] drivers/ub/urma/ubcore/ubcore_device.c:344:6: warning: no previous prototype for 'ubcore_destroy_upi_list'
by kernel test robot 01 Nov '24

01 Nov '24

tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: dd58efc15c73794d1a8bc2e16ed4319c93c1ad56 commit: 84e122368ec3a37e074c9657bc09422b62f6ccd0 [20942/30000] ub: add new feature for urma config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411011536.eEAXaPtt-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411011536.eEAXaPtt-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411011536.eEAXaPtt-lkp@intel.com/ All warnings (new ones prefixed by >>): drivers/ub/urma/uburma/uburma_cmd.c:315:6: warning: no previous prototype for 'uburma_jfc_event_cb' [-Wmissing-prototypes] 315 | void uburma_jfc_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ drivers/ub/urma/uburma/uburma_cmd.c:327:6: warning: no previous prototype for 'uburma_jfs_event_cb' [-Wmissing-prototypes] 327 | void uburma_jfs_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ drivers/ub/urma/uburma/uburma_cmd.c:339:6: warning: no previous prototype for 'uburma_jfr_event_cb' [-Wmissing-prototypes] 339 | void uburma_jfr_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ drivers/ub/urma/uburma/uburma_cmd.c:351:6: warning: no previous prototype for 'uburma_jetty_event_cb' [-Wmissing-prototypes] 351 | void uburma_jetty_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/uburma/uburma_cmd.c:363:6: warning: no previous prototype for 'uburma_jetty_grp_event_cb' [-Wmissing-prototypes] 363 | void uburma_jetty_grp_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~~~~~~~ -- >> drivers/ub/urma/ubcore/ubcore_device.c:344:6: warning: no previous prototype for 'ubcore_destroy_upi_list' [-Wmissing-prototypes] 344 | void ubcore_destroy_upi_list(void) | ^~~~~~~~~~~~~~~~~~~~~~~ -- >> drivers/ub/urma/ubcore/ubcore_netdev.c:49:5: warning: no previous prototype for 'ubcore_check_port_state' [-Wmissing-prototypes] 49 | int ubcore_check_port_state(struct ubcore_device *dev, uint8_t port_idx) | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_netdev.c:73:5: warning: no previous prototype for 'ubcore_find_port_netdev' [-Wmissing-prototypes] 73 | int ubcore_find_port_netdev(struct ubcore_device *dev, struct net_device *ndev) | ^~~~~~~~~~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_netdev.c:90:5: warning: no previous prototype for 'ubcore_find_port_with_dev_name' [-Wmissing-prototypes] 90 | int ubcore_find_port_with_dev_name(struct ubcore_device *dev, char *dev_name) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:113:5: warning: no previous prototype for 'ubcore_set_port_netdev' [-Wmissing-prototypes] 113 | int ubcore_set_port_netdev(struct ubcore_device *dev, struct net_device *ndev, | ^~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:149:6: warning: no previous prototype for 'ubcore_put_port_netdev' [-Wmissing-prototypes] 149 | void ubcore_put_port_netdev(struct ubcore_device *dev) | ^~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:169:10: warning: no previous prototype for 'ubcore_sip_idx_alloc' [-Wmissing-prototypes] 169 | uint32_t ubcore_sip_idx_alloc(uint32_t idx) | ^~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:197:5: warning: no previous prototype for 'ubcore_sip_idx_free' [-Wmissing-prototypes] 197 | int ubcore_sip_idx_free(uint32_t idx) | ^~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:210:6: warning: no previous prototype for 'ubcore_sip_table_init' [-Wmissing-prototypes] 210 | void ubcore_sip_table_init(void) | ^~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:216:6: warning: no previous prototype for 'ubcore_sip_table_uninit' [-Wmissing-prototypes] 216 | void ubcore_sip_table_uninit(void) | ^~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:230:5: warning: no previous prototype for 'ubcore_add_sip_entry' [-Wmissing-prototypes] 230 | int ubcore_add_sip_entry(const struct ubcore_sip_info *sip, uint32_t idx) | ^~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:250:5: warning: no previous prototype for 'ubcore_del_sip_entry' [-Wmissing-prototypes] 250 | int ubcore_del_sip_entry(uint32_t idx) | ^~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:264:5: warning: no previous prototype for 'ubcore_lookup_sip_idx' [-Wmissing-prototypes] 264 | int ubcore_lookup_sip_idx(struct ubcore_sip_info *sip, uint32_t *idx) | ^~~~~~~~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_netdev.c:285:10: warning: no previous prototype for 'ubcore_get_sip_max_cnt' [-Wmissing-prototypes] 285 | uint32_t ubcore_get_sip_max_cnt(void) | ^~~~~~~~~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_netdev.c:290:25: warning: no previous prototype for 'ubcore_lookup_sip_info' [-Wmissing-prototypes] 290 | struct ubcore_sip_info *ubcore_lookup_sip_info(uint32_t idx) | ^~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:301:5: warning: no previous prototype for 'ubcore_notify_uvs_del_sip' [-Wmissing-prototypes] 301 | int ubcore_notify_uvs_del_sip(struct ubcore_device *dev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_netdev.c:343:5: warning: no previous prototype for 'ubcore_notify_uvs_add_sip' [-Wmissing-prototypes] 343 | int ubcore_notify_uvs_add_sip(struct ubcore_device *dev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ -- drivers/ub/urma/ubcore/ubcore_uvs_cmd.c: In function 'ubcore_uvs_cmd_channel_init': >> drivers/ub/urma/ubcore/ubcore_uvs_cmd.c:47:15: warning: 'strncpy' output truncated before terminating nul copying 10 bytes from a string of the same length [-Wstringop-truncation] 47 | (void)strncpy(arg.out.kernel_out, "Hello uvs!", strlen("Hello uvs!")); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ vim +/ubcore_destroy_upi_list +344 drivers/ub/urma/ubcore/ubcore_device.c 343 > 344 void ubcore_destroy_upi_list(void) 345 { 346 struct ubcore_upi_entry *entry = NULL, *next; 347 348 mutex_lock(&g_upi_lock); 349 list_for_each_entry_safe(entry, next, &g_upi_list, node) { 350 if (entry != NULL) { 351 list_del(&entry->node); 352 kfree(entry); 353 } 354 } 355 mutex_unlock(&g_upi_lock); 356 } 357 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-22.03-LTS-SP1 1/7] [Backport] vfs: fix race between evice_inodes() and find_inode()&iput()
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Julian Sun <sunjunchao2870(a)gmail.com> mainline inclusion from mainline-v6.12-rc1 commit 88b1afbf0f6b221f6c5bb66cc80cd3b38d696687 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYPJZ CVE: CVE-2024-47679 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Hi, all Recently I noticed a bug[1] in btrfs, after digged it into and I believe it'a race in vfs. Let's assume there's a inode (ie ino 261) with i_count 1 is called by iput(), and there's a concurrent thread calling generic_shutdown_super(). cpu0: cpu1: iput() // i_count is 1 ->spin_lock(inode) ->dec i_count to 0 ->iput_final() generic_shutdown_super() ->__inode_add_lru() ->evict_inodes() // cause some reason[2] ->if (atomic_read(inode->i_count)) continue; // return before // inode 261 passed the above check // list_lru_add_obj() // and then schedule out ->spin_unlock() // note here: the inode 261 // was still at sb list and hash list, // and I_FREEING|I_WILL_FREE was not been set btrfs_iget() // after some function calls ->find_inode() // found the above inode 261 ->spin_lock(inode) // check I_FREEING|I_WILL_FREE // and passed ->__iget() ->spin_unlock(inode) // schedule back ->spin_lock(inode) // check (I_NEW|I_FREEING|I_WILL_FREE) flags, // passed and set I_FREEING iput() ->spin_unlock(inode) ->spin_lock(inode) ->evict() // dec i_count to 0 ->iput_final() ->spin_unlock() ->evict() Now, we have two threads simultaneously evicting the same inode, which may trigger the BUG(inode->i_state & I_CLEAR) statement both within clear_inode() and iput(). To fix the bug, recheck the inode->i_count after holding i_lock. Because in the most scenarios, the first check is valid, and the overhead of spin_lock() can be reduced. If there is any misunderstanding, please let me know, thanks. [1]: https://lore.kernel.org/linux-btrfs/000000000000eabe1d0619c48986@google.com/ [2]: The reason might be 1. SB_ACTIVE was removed or 2. mapping_shrinkable() return false when I reproduced the bug. Reported-by: syzbot+67ba3c42bcbb4665d3ad(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=67ba3c42bcbb4665d3ad CC: stable(a)vger.kernel.org Fixes: 63997e98a3be ("split invalidate_inodes()") Signed-off-by: Julian Sun <sunjunchao2870(a)gmail.com> Link: https://lore.kernel.org/r/20240823130730.658881-1-sunjunchao2870@gmail.com Reviewed-by: Jan Kara <jack(a)suse.cz> Signed-off-by: Christian Brauner <brauner(a)kernel.org> Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/inode.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/inode.c b/fs/inode.c index 4a8f14745f1e..3b28b96f986b 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -677,6 +677,10 @@ void evict_inodes(struct super_block *sb) continue; spin_lock(&inode->i_lock); + if (atomic_read(&inode->i_count)) { + spin_unlock(&inode->i_lock); + continue; + } if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) { spin_unlock(&inode->i_lock); continue; -- 2.39.2

2 7

[PATCH 6.6 v4 0/3] CVE-2024-50063
by Pu Lehui 01 Nov '24

01 Nov '24

Pu Lehui (1): bpf: Fix kabi breakage in struct bpf_map Xu Kuohai (2): bpf: Prevent tail call between progs attached to different hooks selftests/bpf: Add test for lsm tail call include/linux/bpf.h | 2 +- kernel/bpf/core.c | 21 +++++++-- .../selftests/bpf/prog_tests/test_lsm.c | 46 ++++++++++++++++++- .../selftests/bpf/progs/lsm_tailcall.c | 34 ++++++++++++++ 4 files changed, 98 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/lsm_tailcall.c -- 2.34.1

1 0

[PATCH OLK-6.6 1/8] [Backport] ext4: fix access to uninitialised lock in fc replay path
by Yongjian Sun 01 Nov '24

01 Nov '24

From: "Luis Henriques (SUSE)" <luis.henriques(a)linux.dev> mainline inclusion from mainline-v6.12-rc1 commit 23dfdb56581ad92a9967bcd720c8c23356af74c1 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRBQ CVE: CVE-2024-50014 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The following kernel trace can be triggered with fstest generic/629 when executed against a filesystem with fast-commit feature enabled: INFO: trying to register non-static key. The code is fine but needs lockdep annotation, or maybe you didn't initialize this object before use? turning off the locking correctness validator. CPU: 0 PID: 866 Comm: mount Not tainted 6.10.0+ #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x66/0x90 register_lock_class+0x759/0x7d0 __lock_acquire+0x85/0x2630 ? __find_get_block+0xb4/0x380 lock_acquire+0xd1/0x2d0 ? __ext4_journal_get_write_access+0xd5/0x160 _raw_spin_lock+0x33/0x40 ? __ext4_journal_get_write_access+0xd5/0x160 __ext4_journal_get_write_access+0xd5/0x160 ext4_reserve_inode_write+0x61/0xb0 __ext4_mark_inode_dirty+0x79/0x270 ? ext4_ext_replay_set_iblocks+0x2f8/0x450 ext4_ext_replay_set_iblocks+0x330/0x450 ext4_fc_replay+0x14c8/0x1540 ? jread+0x88/0x2e0 ? rcu_is_watching+0x11/0x40 do_one_pass+0x447/0xd00 jbd2_journal_recover+0x139/0x1b0 jbd2_journal_load+0x96/0x390 ext4_load_and_init_journal+0x253/0xd40 ext4_fill_super+0x2cc6/0x3180 ... In the replay path there's an attempt to lock sbi->s_bdev_wb_lock in function ext4_check_bdev_write_error(). Unfortunately, at this point this spinlock has not been initialized yet. Moving it's initialization to an earlier point in __ext4_fill_super() fixes this splat. Signed-off-by: Luis Henriques (SUSE) <luis.henriques(a)linux.dev> Link: https://patch.msgid.link/20240718094356.7863-1-luis.henriques@linux.dev Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)kernel.org Conflicts: fs/ext4/super.c [Context differences.] Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/super.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index a0c3ff23f846..46977d1d0ff5 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5458,6 +5458,8 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */ mutex_init(&sbi->s_orphan_lock); + spin_lock_init(&sbi->s_bdev_wb_lock); + ext4_fast_commit_init(sb); sb->s_root = NULL; @@ -5678,7 +5680,6 @@ static int __ext4_fill_super(struct fs_context *fc, struct super_block *sb) * Save the original bdev mapping's wb_err value which could be * used to detect the metadata async write error. */ - spin_lock_init(&sbi->s_bdev_wb_lock); errseq_check_and_advance(&sb->s_bdev->bd_inode->i_mapping->wb_err, &sbi->s_bdev_wb_err); EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS; -- 2.39.2

2 1

[PATCH OLK-6.6 8/8] [Backport] ext4: fix timer use-after-free on failed mount
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Xiaxi Shen <shenxiaxi26(a)gmail.com> mainline inclusion from mainline-v6.12-rc1 commit 0ce160c5bdb67081a62293028dc85758a8efb22a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRD8 CVE: CVE-2024-49960 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Syzbot has found an ODEBUG bug in ext4_fill_super The del_timer_sync function cancels the s_err_report timer, which reminds about filesystem errors daily. We should guarantee the timer is no longer active before kfree(sbi). When filesystem mounting fails, the flow goes to failed_mount3, where an error occurs when ext4_stop_mmpd is called, causing a read I/O failure. This triggers the ext4_handle_error function that ultimately re-arms the timer, leaving the s_err_report timer active before kfree(sbi) is called. Fix the issue by canceling the s_err_report timer after calling ext4_stop_mmpd. Signed-off-by: Xiaxi Shen <shenxiaxi26(a)gmail.com> Reported-and-tested-by: syzbot+59e0101c430934bc9a36(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=59e0101c430934bc9a36 Link: https://patch.msgid.link/20240715043336.98097-1-shenxiaxi26@gmail.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)kernel.org Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 561c1e890df2..4b81f9ae3454 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5773,8 +5773,8 @@ failed_mount8: __maybe_unused failed_mount3: /* flush s_sb_upd_work before sbi destroy */ flush_work(&sbi->s_sb_upd_work); - del_timer_sync(&sbi->s_err_report); ext4_stop_mmpd(sbi); + del_timer_sync(&sbi->s_err_report); ext4_group_desc_free(sbi); failed_mount: if (sbi->s_chksum_driver) -- 2.39.2

1 0

[PATCH OLK-6.6 7/8] [Backport] ext4: no need to continue when the number of entries is 1
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Edward Adam Davis <eadavis(a)qq.com> mainline inclusion from mainline-v6.12-rc1 commit 1a00a393d6a7fb1e745a41edd09019bd6a0ad64c category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRCB CVE: CVE-2024-49967 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Fixes: ac27a0ec112a ("[PATCH] ext4: initial copy of files from ext3") Reported-by: syzbot+ae688d469e36fb5138d0(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=ae688d469e36fb5138d0 Signed-off-by: Edward Adam Davis <eadavis(a)qq.com> Reported-and-tested-by: syzbot+ae688d469e36fb5138d0(a)syzkaller.appspotmail.com Link: https://patch.msgid.link/tencent_BE7AEE6C7C2D216CB8949CE8E6EE7ECC2C0A@qq.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Cc: stable(a)kernel.org Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 3bd2301cb48e..661b11d8b19a 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2045,7 +2045,7 @@ static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir, split = count/2; hash2 = map[split].hash; - continued = hash2 == map[split - 1].hash; + continued = split > 0 ? hash2 == map[split - 1].hash : 0; dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n", (unsigned long)dx_get_block(frame->at), hash2, split, count-split)); -- 2.39.2

1 0

[PATCH OLK-6.6 5/8] [Backport] ext4: filesystems without casefold feature cannot be mounted with siphash
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Lizhi Xu <lizhi.xu(a)windriver.com> mainline inclusion from mainline-v6.12-rc1 commit 985b67cd86392310d9e9326de941c22fc9340eec category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8N CVE: CVE-2024-49968 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When mounting the ext4 filesystem, if the default hash version is set to DX_HASH_SIPHASH but the casefold feature is not set, exit the mounting. Reported-by: syzbot+340581ba9dceb7e06fb3(a)syzkaller.appspotmail.com Signed-off-by: Lizhi Xu <lizhi.xu(a)windriver.com> Link: https://patch.msgid.link/20240605012335.44086-1-lizhi.xu@windriver.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Conflicts: fs/ext4/super.c [Context differences.] Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/super.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 46977d1d0ff5..76cd0e62281b 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3709,6 +3709,13 @@ int ext4_feature_set_ok(struct super_block *sb, int readonly) return 0; } #endif + if (EXT4_SB(sb)->s_es->s_def_hash_version == DX_HASH_SIPHASH && + !ext4_has_feature_casefold(sb)) { + ext4_msg(sb, KERN_ERR, + "Filesystem without casefold feature cannot be " + "mounted with siphash"); + return 0; + } if (readonly) return 1; -- 2.39.2

1 1

[PATCH OLK-6.6 4/8] [Backport] ext4: drop ppath from ext4_ext_replay_update_ex() to avoid double-free
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Baokun Li <libaokun1(a)huawei.com> mainline inclusion from mainline-v6.12-rc1 commit 5c0f4cc84d3a601c99bc5e6e6eb1cbda542cce95 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8P CVE: CVE-2024-49983 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When calling ext4_force_split_extent_at() in ext4_ext_replay_update_ex(), the 'ppath' is updated but it is the 'path' that is freed, thus potentially triggering a double-free in the following process: ext4_ext_replay_update_ex ppath = path ext4_force_split_extent_at(&ppath) ext4_split_extent_at ext4_ext_insert_extent ext4_ext_create_new_leaf ext4_ext_grow_indepth ext4_find_extent if (depth > path[0].p_maxdepth) kfree(path) ---> path First freed *orig_path = path = NULL ---> null ppath kfree(path) ---> path double-free !!! So drop the unnecessary ppath and use path directly to avoid this problem. And use ext4_find_extent() directly to update path, avoiding unnecessary memory allocation and freeing. Also, propagate the error returned by ext4_find_extent() instead of using strange error codes. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: stable(a)kernel.org Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Jan Kara <jack(a)suse.cz> Reviewed-by: Ojaswin Mujoo <ojaswin(a)linux.ibm.com> Tested-by: Ojaswin Mujoo <ojaswin(a)linux.ibm.com> Link: https://patch.msgid.link/20240822023545.1994557-8-libaokun@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/extents.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index d618ff9b6b94..28d3175a063a 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -5905,7 +5905,7 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu) int ext4_ext_replay_update_ex(struct inode *inode, ext4_lblk_t start, int len, int unwritten, ext4_fsblk_t pblk) { - struct ext4_ext_path *path = NULL, *ppath; + struct ext4_ext_path *path; struct ext4_extent *ex; int ret; @@ -5921,30 +5921,29 @@ int ext4_ext_replay_update_ex(struct inode *inode, ext4_lblk_t start, if (le32_to_cpu(ex->ee_block) != start || ext4_ext_get_actual_len(ex) != len) { /* We need to split this extent to match our extent first */ - ppath = path; down_write(&EXT4_I(inode)->i_data_sem); - ret = ext4_force_split_extent_at(NULL, inode, &ppath, start, 1); + ret = ext4_force_split_extent_at(NULL, inode, &path, start, 1); up_write(&EXT4_I(inode)->i_data_sem); if (ret) goto out; - kfree(path); - path = ext4_find_extent(inode, start, NULL, 0); + + path = ext4_find_extent(inode, start, &path, 0); if (IS_ERR(path)) - return -1; - ppath = path; + return PTR_ERR(path); ex = path[path->p_depth].p_ext; WARN_ON(le32_to_cpu(ex->ee_block) != start); + if (ext4_ext_get_actual_len(ex) != len) { down_write(&EXT4_I(inode)->i_data_sem); - ret = ext4_force_split_extent_at(NULL, inode, &ppath, + ret = ext4_force_split_extent_at(NULL, inode, &path, start + len, 1); up_write(&EXT4_I(inode)->i_data_sem); if (ret) goto out; - kfree(path); - path = ext4_find_extent(inode, start, NULL, 0); + + path = ext4_find_extent(inode, start, &path, 0); if (IS_ERR(path)) - return -EINVAL; + return PTR_ERR(path); ex = path[path->p_depth].p_ext; } } -- 2.39.2

1 0

[PATCH OLK-6.6 3/8] [Backport] ext4: fix i_data_sem unlock order in ext4_ind_migrate()
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Artem Sadovnikov <ancowi69(a)gmail.com> mainline inclusion from mainline-v6.12-rc1 commit cc749e61c011c255d81b192a822db650c68b313f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRBL CVE: CVE-2024-50006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Fuzzing reports a possible deadlock in jbd2_log_wait_commit. This issue is triggered when an EXT4_IOC_MIGRATE ioctl is set to require synchronous updates because the file descriptor is opened with O_SYNC. This can lead to the jbd2_journal_stop() function calling jbd2_might_wait_for_commit(), potentially causing a deadlock if the EXT4_IOC_MIGRATE call races with a write(2) system call. This problem only arises when CONFIG_PROVE_LOCKING is enabled. In this case, the jbd2_might_wait_for_commit macro locks jbd2_handle in the jbd2_journal_stop function while i_data_sem is locked. This triggers lockdep because the jbd2_journal_start function might also lock the same jbd2_handle simultaneously. Found by Linux Verification Center (linuxtesting.org) with syzkaller. Reviewed-by: Ritesh Harjani (IBM) <ritesh.list(a)gmail.com> Co-developed-by: Mikhail Ukhin <mish.uxin2012(a)yandex.ru> Signed-off-by: Mikhail Ukhin <mish.uxin2012(a)yandex.ru> Signed-off-by: Artem Sadovnikov <ancowi69(a)gmail.com> Rule: add Link: https://lore.kernel.org/stable/20240404095000.5872-1-mish.uxin2012%40yandex… Link: https://patch.msgid.link/20240829152210.2754-1-ancowi69@gmail.com Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/ext4/migrate.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/migrate.c b/fs/ext4/migrate.c index d98ac2af8199..a5e1492bbaaa 100644 --- a/fs/ext4/migrate.c +++ b/fs/ext4/migrate.c @@ -663,8 +663,8 @@ int ext4_ind_migrate(struct inode *inode) if (unlikely(ret2 && !ret)) ret = ret2; errout: - ext4_journal_stop(handle); up_write(&EXT4_I(inode)->i_data_sem); + ext4_journal_stop(handle); out_unlock: ext4_writepages_up_write(inode->i_sb, alloc_ctx); return ret; -- 2.39.2

1 0

[PATCH OLK-6.6 2/8] [Backport] exfat: fix memory leak in exfat_load_bitmap()
by Yongjian Sun 01 Nov '24

01 Nov '24

From: Yuezhang Mo <Yuezhang.Mo(a)sony.com> mainline inclusion from mainline-v6.12-rc1 commit d2b537b3e533f28e0d97293fe9293161fe8cd137 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRBG CVE: CVE-2024-50013 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- If the first directory entry in the root directory is not a bitmap directory entry, 'bh' will not be released and reassigned, which will cause a memory leak. Fixes: 1e49a94cf707 ("exfat: add bitmap operations") Cc: stable(a)vger.kernel.org Signed-off-by: Yuezhang Mo <Yuezhang.Mo(a)sony.com> Reviewed-by: Aoyama Wataru <wataru.aoyama(a)sony.com> Signed-off-by: Namjae Jeon <linkinjeon(a)kernel.org> Signed-off-by: Yongjian Sun <sunyongjian1(a)huawei.com> --- fs/exfat/balloc.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/fs/exfat/balloc.c b/fs/exfat/balloc.c index e918decb3735..5b547a596380 100644 --- a/fs/exfat/balloc.c +++ b/fs/exfat/balloc.c @@ -110,11 +110,8 @@ int exfat_load_bitmap(struct super_block *sb) return -EIO; type = exfat_get_entry_type(ep); - if (type == TYPE_UNUSED) - break; - if (type != TYPE_BITMAP) - continue; - if (ep->dentry.bitmap.flags == 0x0) { + if (type == TYPE_BITMAP && + ep->dentry.bitmap.flags == 0x0) { int err; err = exfat_allocate_bitmap(sb, ep); @@ -122,6 +119,9 @@ int exfat_load_bitmap(struct super_block *sb) return err; } brelse(bh); + + if (type == TYPE_UNUSED) + return -EINVAL; } if (exfat_get_next_cluster(sb, &clu.dir)) -- 2.39.2

1 0

[PATCH openEuler-22.03-LTS-SP1] rtc: cmos: Fix event handler registration ordering issue
by Heyuan Wang 01 Nov '24

01 Nov '24

From: "Rafael J. Wysocki" <rafael.j.wysocki(a)intel.com> stable inclusion from stable-v5.10.163 commit 0bcfccb48696aba475f046c2021f0733659ce0ef category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRDI CVE: CVE-2022-48953 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ---------------------------------------------------- [ Upstream commit 4919d3eb2ec0ee364f7e3cf2d99646c1b224fae8 ] Because acpi_install_fixed_event_handler() enables the event automatically on success, it is incorrect to call it before the handler routine passed to it is ready to handle events. Unfortunately, the rtc-cmos driver does exactly the incorrect thing by calling cmos_wake_setup(), which passes rtc_handler() to acpi_install_fixed_event_handler(), before cmos_do_probe(), because rtc_handler() uses dev_get_drvdata() to get to the cmos object pointer and the driver data pointer is only populated in cmos_do_probe(). This leads to a NULL pointer dereference in rtc_handler() on boot if the RTC fixed event happens to be active at the init time. To address this issue, change the initialization ordering of the driver so that cmos_wake_setup() is always called after a successful cmos_do_probe() call. While at it, change cmos_pnp_probe() to call cmos_do_probe() after the initial if () statement used for computing the IRQ argument to be passed to cmos_do_probe() which is cleaner than calling it in each branch of that if () (local variable "irq" can be of type int, because it is passed to that function as an argument of type int). Note that commit 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") caused this issue to affect a larger number of systems, because previously it only affected systems with ACPI_FADT_LOW_POWER_S0 set, but it is present regardless of that commit. Fixes: 6492fed7d8c9 ("rtc: rtc-cmos: Do not check ACPI_FADT_LOW_POWER_S0") Fixes: a474aaedac99 ("rtc-cmos: move wake setup from ACPI glue into RTC driver") Link: https://lore.kernel.org/linux-acpi/20221010141630.zfzi7mk7zvnmclzy@techsing… Reported-by: Mel Gorman <mgorman(a)techsingularity.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas(a)google.com> Tested-by: Mel Gorman <mgorman(a)techsingularity.net> Link: https://lore.kernel.org/r/5629262.DvuYhMxLoT@kreacher Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Stable-dep-of: 83ebb7b3036d ("rtc: cmos: Disable ACPI RTC event on removal") Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Heyuan Wang <wangheyuan2(a)h-partners.com> --- drivers/rtc/rtc-cmos.c | 29 +++++++++++++++++++---------- 1 file changed, 19 insertions(+), 10 deletions(-) diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index 58c6382a2807..2660e52b487c 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -1301,10 +1301,10 @@ static void cmos_check_acpi_rtc_status(struct device *dev, static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) { - cmos_wake_setup(&pnp->dev); + int irq, ret; if (pnp_port_start(pnp, 0) == 0x70 && !pnp_irq_valid(pnp, 0)) { - unsigned int irq = 0; + irq = 0; #ifdef CONFIG_X86 /* Some machines contain a PNP entry for the RTC, but * don't define the IRQ. It should always be safe to @@ -1313,13 +1313,17 @@ static int cmos_pnp_probe(struct pnp_dev *pnp, const struct pnp_device_id *id) if (nr_legacy_irqs()) irq = RTC_IRQ; #endif - return cmos_do_probe(&pnp->dev, - pnp_get_resource(pnp, IORESOURCE_IO, 0), irq); } else { - return cmos_do_probe(&pnp->dev, - pnp_get_resource(pnp, IORESOURCE_IO, 0), - pnp_irq(pnp, 0)); + irq = pnp_irq(pnp, 0); } + + ret = cmos_do_probe(&pnp->dev, pnp_get_resource(pnp, IORESOURCE_IO, 0), irq); + if (ret) + return ret; + + cmos_wake_setup(&pnp->dev); + + return 0; } static void cmos_pnp_remove(struct pnp_dev *pnp) @@ -1403,10 +1407,9 @@ static inline void cmos_of_init(struct platform_device *pdev) {} static int __init cmos_platform_probe(struct platform_device *pdev) { struct resource *resource; - int irq; + int irq, ret; cmos_of_init(pdev); - cmos_wake_setup(&pdev->dev); if (RTC_IOMAPPED) resource = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -1416,7 +1419,13 @@ static int __init cmos_platform_probe(struct platform_device *pdev) if (irq < 0) irq = -1; - return cmos_do_probe(&pdev->dev, resource, irq); + ret = cmos_do_probe(&pdev->dev, resource, irq); + if (ret) + return ret; + + cmos_wake_setup(&pdev->dev); + + return 0; } static int cmos_platform_remove(struct platform_device *pdev) -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] ASoC: ops: Fix bounds check for _sx controls
by Heyuan Wang 01 Nov '24

01 Nov '24

From: Mark Brown <broonie(a)kernel.org> stable inclusion from stable-v5.10.158 commit b50c9641897274c3faef5f95ac852f54b94be2e8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRF8 CVE: CVE-2022-49005 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 698813ba8c580efb356ace8dbf55f61dac6063a8 ] For _sx controls the semantics of the max field is not the usual one, max is the number of steps rather than the maximum value. This means that our check in snd_soc_put_volsw_sx() needs to just check against the maximum value. Fixes: 4f1e50d6a9cf9c1b ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()") Signed-off-by: Mark Brown <broonie(a)kernel.org> Link: https://lore.kernel.org/r/20220511134137.169575-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Heyuan Wang <wangheyuan2(a)h-partners.com> --- sound/soc/soc-ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index 0f26d6c31ce5..5fdd96e77ef3 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -432,7 +432,7 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol, val = ucontrol->value.integer.value[0]; if (mc->platform_max && val > mc->platform_max) return -EINVAL; - if (val > max - min) + if (val > max) return -EINVAL; if (val < 0) return -EINVAL; -- 2.25.1

2 1

[PATCH 6.6 v4 0/3] CVE-2024-50063
by Pu Lehui 01 Nov '24

01 Nov '24

Pu Lehui (1): bpf: Fix kabi breakage in struct bpf_map Xu Kuohai (2): bpf: Prevent tail call between progs attached to different hooks selftests/bpf: Add test for lsm tail call include/linux/bpf.h | 2 +- kernel/bpf/core.c | 21 +++++++-- .../selftests/bpf/prog_tests/test_lsm.c | 46 ++++++++++++++++++- .../selftests/bpf/progs/lsm_tailcall.c | 34 ++++++++++++++ 4 files changed, 98 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/lsm_tailcall.c -- 2.34.1

1 3

[openeuler:openEuler-1.0-LTS 15256/23932] arch/arm64/kernel/mpam/mpam_device.c:1250: warning: Function parameter or member 'comp' not described in 'do_device_sync'
by kernel test robot 01 Nov '24

01 Nov '24

tree: https://gitee.com/openeuler/kernel.git openEuler-1.0-LTS head: c129df6fe938fddc83fddea6a1976cd18573b095 commit: b55756d8f2c3e005e73aa59652dae1e528956862 [15256/23932] arm64/mpam: Implement helpers for handling configuration and monitoring config: arm64-randconfig-001-20241029 (https://download.01.org/0day-ci/archive/20241101/202411011311.9dahsLh5-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411011311.9dahsLh5-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411011311.9dahsLh5-lkp@intel.com/ All warnings (new ones prefixed by >>): arch/arm64/kernel/mpam/mpam_device.c:520:24: warning: no previous prototype for 'mpam_component_get' [-Wmissing-prototypes] 520 | struct mpam_component *mpam_component_get(struct mpam_class *class, int id, | ^~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c:612:1: warning: no previous prototype for '__mpam_device_create' [-Wmissing-prototypes] 612 | __mpam_device_create(u8 level_idx, enum mpam_class_types type, | ^~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c:692:12: warning: no previous prototype for 'mpam_discovery_start' [-Wmissing-prototypes] 692 | int __init mpam_discovery_start(void) | ^~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c:918:12: warning: no previous prototype for 'mpam_discovery_complete' [-Wmissing-prototypes] 918 | int __init mpam_discovery_complete(void) | ^~~~~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c:935:13: warning: no previous prototype for 'mpam_discovery_failed' [-Wmissing-prototypes] 935 | void __init mpam_discovery_failed(void) | ^~~~~~~~~~~~~~~~~~~~~ In file included from arch/arm64/include/asm/atomic.h:34, from include/linux/atomic.h:7, from include/asm-generic/bitops/atomic.h:5, from arch/arm64/include/asm/bitops.h:37, from include/linux/bitops.h:19, from include/linux/kernel.h:11, from include/asm-generic/bug.h:18, from arch/arm64/include/asm/bug.h:37, from include/linux/bug.h:5, from include/linux/io.h:23, from arch/arm64/kernel/mpam/mpam_device.c:29: In function '__cmpxchg_case_mb_4', inlined from '__cmpxchg_mb' at arch/arm64/include/asm/cmpxchg.h:143:1, inlined from 'mpam_cpu_online' at arch/arm64/kernel/mpam/mpam_device.c:891:8: arch/arm64/include/asm/atomic_lse.h:492:9: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'int[1]' [-Warray-bounds=] 492 | asm volatile( \ | ^~~ arch/arm64/include/asm/atomic_lse.h:523:1: note: in expansion of macro '__CMPXCHG_CASE' 523 | __CMPXCHG_CASE(w, , mb_4, al, "memory") | ^~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c: In function 'mpam_cpu_online': arch/arm64/kernel/mpam/mpam_device.c:73:12: note: object 'mpam_broken' of size 4 73 | static int mpam_broken; | ^~~~~~~~~~~ In function '__cmpxchg_case_mb_4', inlined from '__cmpxchg_mb' at arch/arm64/include/asm/cmpxchg.h:143:1, inlined from 'mpam_cpu_online' at arch/arm64/kernel/mpam/mpam_device.c:891:8: arch/arm64/include/asm/atomic_lse.h:492:9: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'int[1]' [-Warray-bounds=] 492 | asm volatile( \ | ^~~ arch/arm64/include/asm/atomic_lse.h:523:1: note: in expansion of macro '__CMPXCHG_CASE' 523 | __CMPXCHG_CASE(w, , mb_4, al, "memory") | ^~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_device.c: In function 'mpam_cpu_online': arch/arm64/kernel/mpam/mpam_device.c:73:12: note: object 'mpam_broken' of size 4 73 | static int mpam_broken; | ^~~~~~~~~~~ >> arch/arm64/kernel/mpam/mpam_device.c:1250: warning: Function parameter or member 'comp' not described in 'do_device_sync' >> arch/arm64/kernel/mpam/mpam_device.c:1250: warning: Function parameter or member 'sync_ctx' not described in 'do_device_sync' vim +1250 arch/arm64/kernel/mpam/mpam_device.c 1242 1243 /** 1244 * in some cases/platforms the MSC register access is only possible with 1245 * the associated CPUs. And need to check if those CPUS are online before 1246 * accessing it. So we use those CPUs dev->online_affinity to apply config. 1247 */ 1248 static int do_device_sync(struct mpam_component *comp, 1249 struct mpam_device_sync *sync_ctx) > 1250 { 1251 int cpu; 1252 struct mpam_device *dev; 1253 1254 lockdep_assert_cpus_held(); 1255 1256 cpu = get_cpu(); 1257 if (cpumask_test_cpu(cpu, &comp->fw_affinity)) 1258 mpam_component_device_sync(sync_ctx); 1259 put_cpu(); 1260 1261 /* 1262 * Find the set of other CPUs we need to run on to update 1263 * this component 1264 */ 1265 list_for_each_entry(dev, &comp->devices, comp_list) { 1266 if (sync_ctx->error) 1267 break; 1268 1269 if (cpumask_intersects(&dev->online_affinity, 1270 &sync_ctx->updated_on)) 1271 continue; 1272 1273 /* 1274 * This device needs the config applying, and hasn't been 1275 * reachable by any cpu so far. 1276 */ 1277 cpu = cpumask_any(&dev->online_affinity); 1278 smp_call_function_single(cpu, mpam_component_device_sync, 1279 sync_ctx, 1); 1280 } 1281 1282 return sync_ctx->error; 1283 } 1284 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[openeuler:OLK-5.10 19549/30000] arch/arm64/kernel/cpufeature.c:1729:13: warning: no previous prototype for 'early_pbha_init'
by kernel test robot 01 Nov '24

01 Nov '24

Hi Ma, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: 8c742fc5ad4aebf865be0fa53ebdbf26f0991e2c commit: f43933b3f947a7f9314ec8d704c6ae01041dbbba [19549/30000] arm64: cpufeature: Enable PBHA for stage1 early via FDT config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411011254.Q328bGAB-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411011254.Q328bGAB-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411011254.Q328bGAB-lkp@intel.com/ Note: functions only called from assembly code should be annotated with the asmlinkage attribute All warnings (new ones prefixed by >>): arch/arm64/kernel/cpufeature.c:1627:6: warning: no previous prototype for 'update_pbha_perf_only_bit' [-Wmissing-prototypes] 1627 | void update_pbha_perf_only_bit(const u8 *bits, int cnt) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> arch/arm64/kernel/cpufeature.c:1729:13: warning: no previous prototype for 'early_pbha_init' [-Wmissing-prototypes] 1729 | void __init early_pbha_init(void) | ^~~~~~~~~~~~~~~ vim +/early_pbha_init +1729 arch/arm64/kernel/cpufeature.c 1728 > 1729 void __init early_pbha_init(void) 1730 { 1731 void *fdt; 1732 int node; 1733 const u8 *prop; 1734 int size; 1735 1736 spin_lock(&pbha_dt_lock); 1737 1738 fdt = get_early_fdt_ptr(); 1739 if (!fdt) 1740 goto unlock; 1741 1742 node = fdt_path_offset(fdt, "/cpus"); 1743 if (node < 0) 1744 goto unlock; 1745 1746 prop = fdt_getprop(fdt, node, "arm,pbha-performance-only", &size); 1747 if (!prop) 1748 goto unlock; 1749 1750 if (!cpu_has_pbha()) 1751 goto unlock; 1752 1753 update_pbha_perf_only_bit(prop, size); 1754 enable_pbha_inner(); 1755 1756 pbha_enabled = true; 1757 1758 unlock: 1759 spin_unlock(&pbha_dt_lock); 1760 } 1761 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-22.03-LTS-SP1] lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
by Zhang Zekun 01 Nov '24

01 Nov '24

From: Kent Overstreet <kent.overstreet(a)linux.dev> stable inclusion from stable-v5.10.226 commit 99418ec776a39609f50934720419e0b464ca2283 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU82 CVE: CVE-2024-47668 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ----------------------------------------------------------- [ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ] If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. Signed-off-by: Kent Overstreet <kent.overstreet(a)linux.dev> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- lib/generic-radix-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/generic-radix-tree.c b/lib/generic-radix-tree.c index 7dfa88282b00..78f081d695d0 100644 --- a/lib/generic-radix-tree.c +++ b/lib/generic-radix-tree.c @@ -131,6 +131,8 @@ void *__genradix_ptr_alloc(struct __genradix *radix, size_t offset, if ((v = cmpxchg_release(&radix->root, r, new_root)) == r) { v = new_root; new_node = NULL; + } else { + new_node->children[0] = NULL; } } -- 2.17.1

2 1

[PATCH OLK-5.10] lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
by Zhang Zekun 01 Nov '24

01 Nov '24

From: Kent Overstreet <kent.overstreet(a)linux.dev> stable inclusion from stable-v5.10.226 commit 99418ec776a39609f50934720419e0b464ca2283 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU82 CVE: CVE-2024-47668 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ----------------------------------------------------------- [ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ] If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. Signed-off-by: Kent Overstreet <kent.overstreet(a)linux.dev> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- lib/generic-radix-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/generic-radix-tree.c b/lib/generic-radix-tree.c index 7dfa88282b00..78f081d695d0 100644 --- a/lib/generic-radix-tree.c +++ b/lib/generic-radix-tree.c @@ -131,6 +131,8 @@ void *__genradix_ptr_alloc(struct __genradix *radix, size_t offset, if ((v = cmpxchg_release(&radix->root, r, new_root)) == r) { v = new_root; new_node = NULL; + } else { + new_node->children[0] = NULL; } } -- 2.17.1

2 1

[PATCH OLK-5.10] lib/generic-radix-tree.c: Fix rare race in __genradix_ptr_alloc()
by Zhang Zekun 01 Nov '24

01 Nov '24

From: Kent Overstreet <kent.overstreet(a)linux.dev> stable inclusion from stable-v5.10.226 commit 99418ec776a39609f50934720419e0b464ca2283 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU82 CVE: CVE-2024-47668 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ----------------------------------------------------------- [ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ] If we need to increase the tree depth, allocate a new node, and then race with another thread that increased the tree depth before us, we'll still have a preallocated node that might be used later. If we then use that node for a new non-root node, it'll still have a pointer to the old root instead of being zeroed - fix this by zeroing it in the cmpxchg failure path. Signed-off-by: Kent Overstreet <kent.overstreet(a)linux.dev> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> --- lib/generic-radix-tree.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/lib/generic-radix-tree.c b/lib/generic-radix-tree.c index 7dfa88282b00..78f081d695d0 100644 --- a/lib/generic-radix-tree.c +++ b/lib/generic-radix-tree.c @@ -131,6 +131,8 @@ void *__genradix_ptr_alloc(struct __genradix *radix, size_t offset, if ((v = cmpxchg_release(&radix->root, r, new_root)) == r) { v = new_root; new_node = NULL; + } else { + new_node->children[0] = NULL; } } -- 2.17.1

2 1

[PATCH OLK-6.6 v3 0/3] CVE-2024-50063
by Pu Lehui 01 Nov '24

01 Nov '24

Pu Lehui (1): bpf: Fix kabi breakage in struct bpf_map Xu Kuohai (2): bpf: Prevent tail call between progs attached to different hooks selftests/bpf: Add test for lsm tail call include/linux/bpf.h | 2 +- kernel/bpf/core.c | 21 +++++++-- .../selftests/bpf/prog_tests/test_lsm.c | 46 ++++++++++++++++++- .../selftests/bpf/progs/lsm_tailcall.c | 34 ++++++++++++++ 4 files changed, 98 insertions(+), 5 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/lsm_tailcall.c -- 2.34.1

2 4

[PATCH OLK-6.6] drm/amd/display: Check null-initialized variables
by Zheng Zucheng 01 Nov '24

01 Nov '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 367cd9ceba1933b63bc1d87d967baf6d9fd241d2 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYR8V CVE: CVE-2024-49898 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [WHAT & HOW] drr_timing and subvp_pipe are initialized to null and they are not always assigned new values. It is necessary to check for null before dereferencing. This fixes 2 FORWARD_NULL issues reported by Coverity. Reviewed-by: Nevenko Stupar <nevenko.stupar(a)amd.com> Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Conflicts: drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c [Some contexts subvp_vblank_schedulable different. No functional impact.] Signed-off-by: Zheng Zucheng <zhengzucheng(a)huawei.com> --- drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c index 3d82cbef1274..ac6357c089e7 100644 --- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c +++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c @@ -932,8 +932,9 @@ static bool subvp_drr_schedulable(struct dc *dc, struct dc_state *context) * for VBLANK: (VACTIVE region of the SubVP pipe can fit the MALL prefetch, VBLANK frame time, * and the max of (VBLANK blanking time, MALL region)). */ - if (stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 && - subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0) + if (drr_timing && + stretched_drr_us < (1 / (double)drr_timing->min_refresh_in_uhz) * 1000000 * 1000000 && + subvp_active_us - prefetch_us - stretched_drr_us - max_vblank_mallregion > 0) schedulable = true; return schedulable; @@ -995,7 +996,7 @@ static bool subvp_vblank_schedulable(struct dc *dc, struct dc_state *context) if (!subvp_pipe && pipe->stream->mall_stream_config.type == SUBVP_MAIN) subvp_pipe = pipe; } - if (found) { + if (found && subvp_pipe) { main_timing = &subvp_pipe->stream->timing; phantom_timing = &subvp_pipe->stream->mall_stream_config.paired_stream->timing; vblank_timing = &context->res_ctx.pipe_ctx[vblank_index].stream->timing; -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP1] drm/amd/display: Check null pointers before using them
by Zheng Zucheng 01 Nov '24

01 Nov '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRD7 CVE: CVE-2024-49922 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 ] [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c [amdgpu_dm_commit_streams() without this processing logic, the null pointer judgment of this function does not need backport. Some contexts around amdgpu_dm_atomic_commit_tail(), No functional impact.] Signed-off-by: Zheng Zucheng <zhengzucheng(a)huawei.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 9c316dec0319..8da1fda96262 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5385,6 +5385,9 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector, int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8; enum dc_status dc_result = DC_OK; + if (!dm_state) + return NULL; + do { stream = create_stream_for_sink(aconnector, drm_mode, dm_state, old_stream, @@ -7801,11 +7804,12 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) } if (is_content_protection_different(new_con_state, old_con_state, connector, adev->dm.hdcp_workqueue)) - hdcp_update_display( - adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, - new_con_state->hdcp_content_type, - new_con_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED ? true - : false); + if (aconnector->dc_link) + hdcp_update_display( + adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, + new_con_state->hdcp_content_type, + new_con_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED ? true + : false); } #endif -- 2.34.1

2 1

[PATCH OLK-6.6] drm/amd/display: Check null pointers before using them
by Zheng Zucheng 01 Nov '24

01 Nov '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRD7 CVE: CVE-2024-49922 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 ] [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c [amdgpu_dm_commit_streams() without this processing logic, the null pointer judgment of this function does not need backport] Signed-off-by: Zheng Zucheng <zhengzucheng(a)huawei.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 6b8f945cf8ad..14caefd47e33 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -6606,6 +6606,9 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector, int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8; enum dc_status dc_result = DC_OK; + if (!dm_state) + return NULL; + do { stream = create_stream_for_sink(aconnector, drm_mode, dm_state, old_stream, @@ -8832,9 +8835,10 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) DRM_INFO("[HDCP_DM] hdcp_update_display enable_encryption = %x\n", enable_encryption); - hdcp_update_display( - adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, - new_con_state->hdcp_content_type, enable_encryption); + if (aconnector->dc_link) + hdcp_update_display( + adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, + new_con_state->hdcp_content_type, enable_encryption); } } -- 2.34.1

2 1

[PATCH OLK-6.6] media: i2c: ar0521: Use cansleep version of gpiod_set_value()
by Zheng Zucheng 01 Nov '24

01 Nov '24

From: Alexander Shiyan <eagle.alexander923(a)gmail.com> stable inclusion from stable-v6.6.55 commit 625a77b68c96349c16fcc1faa42784313e0b1a85 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRC4 CVE: CVE-2024-49961 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit bee1aed819a8cda47927436685d216906ed17f62 upstream. If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... Signed-off-by: Alexander Shiyan <eagle.alexander923(a)gmail.com> Fixes: 852b50aeed15 ("media: On Semi AR0521 sensor driver") Cc: stable(a)vger.kernel.org Acked-by: Krzysztof Hałasa <khalasa(a)piap.pl> Signed-off-by: Sakari Ailus <sakari.ailus(a)linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zheng Zucheng <zhengzucheng(a)huawei.com> --- drivers/media/i2c/ar0521.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c index a4e39871e8f7..375284a59fd1 100644 --- a/drivers/media/i2c/ar0521.c +++ b/drivers/media/i2c/ar0521.c @@ -847,7 +847,8 @@ static int ar0521_power_off(struct device *dev) clk_disable_unprepare(sensor->extclk); if (sensor->reset_gpio) - gpiod_set_value(sensor->reset_gpio, 1); /* assert RESET signal */ + /* assert RESET signal */ + gpiod_set_value_cansleep(sensor->reset_gpio, 1); for (i = ARRAY_SIZE(ar0521_supply_names) - 1; i >= 0; i--) { if (sensor->supplies[i]) @@ -881,7 +882,7 @@ static int ar0521_power_on(struct device *dev) if (sensor->reset_gpio) /* deassert RESET signal */ - gpiod_set_value(sensor->reset_gpio, 0); + gpiod_set_value_cansleep(sensor->reset_gpio, 0); usleep_range(4500, 5000); /* min 45000 clocks */ for (cnt = 0; cnt < ARRAY_SIZE(initial_regs); cnt++) { -- 2.34.1

2 1

[PATCH OLK-5.10] drm/amd/display: Check null pointers before using them
by Zheng Zucheng 01 Nov '24

01 Nov '24

From: Alex Hung <alex.hung(a)amd.com> mainline inclusion from mainline-v6.12-rc1 commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRD7 CVE: CVE-2024-49922 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 1ff12bcd7deaeed25efb5120433c6a45dd5504a8 ] [WHAT & HOW] These pointers are null checked previously in the same function, indicating they might be null as reported by Coverity. As a result, they need to be checked when used again. This fixes 3 FORWARD_NULL issue reported by Coverity. Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira(a)amd.com> Signed-off-by: Jerry Zuo <jerry.zuo(a)amd.com> Signed-off-by: Alex Hung <alex.hung(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c [amdgpu_dm_commit_streams() without this processing logic, the null pointer judgment of this function does not need backport. Some contexts around amdgpu_dm_atomic_commit_tail(), No functional impact.] Signed-off-by: Zheng Zucheng <zhengzucheng(a)huawei.com> --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 9c316dec0319..8da1fda96262 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5385,6 +5385,9 @@ create_validate_stream_for_sink(struct amdgpu_dm_connector *aconnector, int requested_bpc = drm_state ? drm_state->max_requested_bpc : 8; enum dc_status dc_result = DC_OK; + if (!dm_state) + return NULL; + do { stream = create_stream_for_sink(aconnector, drm_mode, dm_state, old_stream, @@ -7801,11 +7804,12 @@ static void amdgpu_dm_atomic_commit_tail(struct drm_atomic_state *state) } if (is_content_protection_different(new_con_state, old_con_state, connector, adev->dm.hdcp_workqueue)) - hdcp_update_display( - adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, - new_con_state->hdcp_content_type, - new_con_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED ? true - : false); + if (aconnector->dc_link) + hdcp_update_display( + adev->dm.hdcp_workqueue, aconnector->dc_link->link_index, aconnector, + new_con_state->hdcp_content_type, + new_con_state->content_protection == DRM_MODE_CONTENT_PROTECTION_DESIRED ? true + : false); } #endif -- 2.34.1

2 1

[openeuler:openEuler-1.0-LTS 13350/23911] super.c:undefined reference to `__alloc_skb'
by kernel test robot 01 Nov '24

01 Nov '24

tree: https://gitee.com/openeuler/kernel.git openEuler-1.0-LTS head: d3ae2925a8986f17b9b1a4b026403edaf8286665 commit: 6636f4434a9c5c9c645694db206188ee5a6626dd [13350/23911] ext4: report error to userspace by netlink config: x86_64-buildonly-randconfig-003-20241030 (https://download.01.org/0day-ci/archive/20241101/202411011008.jiA2icMS-lkp@…) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411011008.jiA2icMS-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411011008.jiA2icMS-lkp@intel.com/ All errors (new ones prefixed by >>): ld: warning: arch/x86/lib/csum-copy_64.o: missing .note.GNU-stack section implies executable stack ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker ld: warning: arch/x86/lib/csum-copy_64.o: missing .note.GNU-stack section implies executable stack ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker ld: warning: .tmp_vmlinux1 has a LOAD segment with RWX permissions ld: kernel/sched/cputime.o: in function `sched_idle_time_adjust': cputime.c:(.text+0xa05): undefined reference to `get_idle_time' ld: fs/ext4/super.o: in function `ext4_netlink_send_info': >> super.c:(.text+0x149f3): undefined reference to `__alloc_skb' >> ld: super.c:(.text+0x14ac9): undefined reference to `__nlmsg_put' >> ld: super.c:(.text+0x14af3): undefined reference to `kfree_skb' >> ld: super.c:(.text+0x14b59): undefined reference to `netlink_broadcast' ld: fs/ext4/super.o: in function `ext4_init_fs': >> super.c:(.init.text+0x95bf): undefined reference to `init_net' >> ld: super.c:(.init.text+0x95c4): undefined reference to `__netlink_kernel_create' ld: fs/ext4/super.o: in function `ext4_exit_fs': >> super.c:(.exit.text+0x93): undefined reference to `netlink_kernel_release' -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH OLK-5.10] f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()
by Long Li 01 Nov '24

01 Nov '24

From: Chao Yu <chao(a)kernel.org> mainline inclusion from mainline-v6.10-rc2 commit c7f114d864ac91515bb07ac271e9824a20f5ed95 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYPJO CVE: CVE-2024-47691 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- [ Upstream commit c7f114d864ac91515bb07ac271e9824a20f5ed95 ] syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore. Reported-by: syzbot+1a8e2b31f2ac9bd3d148(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/0000000000005c7ccb061e032b9b@googl… Fixes: 7950e9ac638e ("f2fs: stop gc/discard thread after fs shutdown") Signed-off-by: Chao Yu <chao(a)kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: fs/f2fs/file.c [Conflicts due to no code refactor in f2fs] Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/f2fs/file.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index eff0b359f1a3..4138e7e13845 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2296,12 +2296,17 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg) goto out; } + /* grab sb->s_umount to avoid racing w/ remount() */ + down_read(&sbi->sb->s_umount); + f2fs_stop_gc_thread(sbi); f2fs_stop_discard_thread(sbi); f2fs_drop_discard_cmd(sbi); clear_opt(sbi, DISCARD); + up_read(&sbi->sb->s_umount); + f2fs_update_time(sbi, REQ_TIME); out: if (in != F2FS_GOING_DOWN_FULLSYNC) -- 2.39.2

2 1

[PATCH openEuler-22.03-LTS-SP1] f2fs: fix to avoid use-after-free in f2fs_stop_gc_thread()
by Long Li 01 Nov '24

01 Nov '24

From: Chao Yu <chao(a)kernel.org> mainline inclusion from mainline-v6.10-rc2 commit c7f114d864ac91515bb07ac271e9824a20f5ed95 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYPJO CVE: CVE-2024-47691 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- [ Upstream commit c7f114d864ac91515bb07ac271e9824a20f5ed95 ] syzbot reports a f2fs bug as below: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:114 print_report+0xe8/0x550 mm/kasan/report.c:491 kasan_report+0x143/0x180 mm/kasan/report.c:601 kasan_check_range+0x282/0x290 mm/kasan/generic.c:189 instrument_atomic_read_write include/linux/instrumented.h:96 [inline] atomic_fetch_add_relaxed include/linux/atomic/atomic-instrumented.h:252 [inline] __refcount_add include/linux/refcount.h:184 [inline] __refcount_inc include/linux/refcount.h:241 [inline] refcount_inc include/linux/refcount.h:258 [inline] get_task_struct include/linux/sched/task.h:118 [inline] kthread_stop+0xca/0x630 kernel/kthread.c:704 f2fs_stop_gc_thread+0x65/0xb0 fs/f2fs/gc.c:210 f2fs_do_shutdown+0x192/0x540 fs/f2fs/file.c:2283 f2fs_ioc_shutdown fs/f2fs/file.c:2325 [inline] __f2fs_ioctl+0x443a/0xbe60 fs/f2fs/file.c:4325 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is below race condition, it may cause use-after-free issue in sbi->gc_th pointer. - remount - f2fs_remount - f2fs_stop_gc_thread - kfree(gc_th) - f2fs_ioc_shutdown - f2fs_do_shutdown - f2fs_stop_gc_thread - kthread_stop(gc_th->f2fs_gc_task) : sbi->gc_thread = NULL; We will call f2fs_do_shutdown() in two paths: - for f2fs_ioc_shutdown() path, we should grab sb->s_umount semaphore for fixing. - for f2fs_shutdown() path, it's safe since caller has already grabbed sb->s_umount semaphore. Reported-by: syzbot+1a8e2b31f2ac9bd3d148(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-f2fs-devel/0000000000005c7ccb061e032b9b@googl… Fixes: 7950e9ac638e ("f2fs: stop gc/discard thread after fs shutdown") Signed-off-by: Chao Yu <chao(a)kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: fs/f2fs/file.c [Conflicts due to no code refactor in f2fs] Signed-off-by: Long Li <leo.lilong(a)huawei.com> --- fs/f2fs/file.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index ab708374d88e..0b355f00225b 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2296,12 +2296,17 @@ static int f2fs_ioc_shutdown(struct file *filp, unsigned long arg) goto out; } + /* grab sb->s_umount to avoid racing w/ remount() */ + down_read(&sbi->sb->s_umount); + f2fs_stop_gc_thread(sbi); f2fs_stop_discard_thread(sbi); f2fs_drop_discard_cmd(sbi); clear_opt(sbi, DISCARD); + up_read(&sbi->sb->s_umount); + f2fs_update_time(sbi, REQ_TIME); out: if (in != F2FS_GOING_DOWN_FULLSYNC) -- 2.39.2

2 1

[PATCH OLK-6.6] i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
by He Yujie 01 Nov '24

01 Nov '24

From: Kaixin Wang <kxwang23(a)m.fudan.edu.cn> mainline inclusion from mainline-v6.12-rc1 commit 61850725779709369c7e907ae8c7c75dc7cec4f3 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRD2 CVE: CVE-2024-49874 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In the svc_i3c_master_probe function, &master->hj_work is bound with svc_i3c_master_hj_work, &master->ibi_work is bound with svc_i3c_master_ibi_work. And svc_i3c_master_ibi_work can start the hj_work, svc_i3c_master_irq_handler can start the ibi_work. If we remove the module which will call svc_i3c_master_remove to make cleanup, it will free master->base through i3c_master_unregister while the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | svc_i3c_master_hj_work svc_i3c_master_remove | i3c_master_unregister(&master->base)| device_unregister(&master->dev) | device_release | //free master->base | | i3c_master_do_daa(&master->base) | //use master->base Fix it by ensuring that the work is canceled before proceeding with the cleanup in svc_i3c_master_remove. Fixes: 0f74f8b6675c ("i3c: Make i3c_master_unregister() return void") Cc: stable(a)vger.kernel.org Signed-off-by: Kaixin Wang <kxwang23(a)m.fudan.edu.cn> Reviewed-by: Miquel Raynal <miquel.raynal(a)bootlin.com> Reviewed-by: Frank Li <Frank.Li(a)nxp.com> Link: https://lore.kernel.org/stable/20240914154030.180-1-kxwang23%40m.fudan.edu.… Link: https://lore.kernel.org/r/20240914163932.253-1-kxwang23@m.fudan.edu.cn Signed-off-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: He Yujie <coka.heyujie(a)huawei.com> --- drivers/i3c/master/svc-i3c-master.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/i3c/master/svc-i3c-master.c b/drivers/i3c/master/svc-i3c-master.c index acc937275c18..f344f8733f83 100644 --- a/drivers/i3c/master/svc-i3c-master.c +++ b/drivers/i3c/master/svc-i3c-master.c @@ -1697,6 +1697,7 @@ static void svc_i3c_master_remove(struct platform_device *pdev) { struct svc_i3c_master *master = platform_get_drvdata(pdev); + cancel_work_sync(&master->hj_work); i3c_master_unregister(&master->base); pm_runtime_dont_use_autosuspend(&pdev->dev); -- 2.34.1

2 1

[PATCH OLK-6.6 v4] openeuler_defconfig: Disable CONFIG_DEBUG_INFO_BTF_MODULES
by Pu Lehui 01 Nov '24

01 Nov '24

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAX0HW -------------------------------- The BTF information of the data structure in the kernel module is generated based on the corresponding kernel's base BTF when compiling the kernel module. When the kernel module is loaded into other kernels, unpredictable BTF verification errors will occur due to different base BTF, which will lead to the kernel module loading failed. Disable CONFIG_DEBUG_INFO_BTF_MODULES will skip the kernel module BTF verification. Fixes: 4d88af8133c4 ("config: add initial openeuler_defconfig for x86") Fixes: 3c70ec8dbed1 ("config: add initial openeuler_defconfig for arm64") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- arch/x86/configs/openeuler_defconfig | 2 +- include/linux/module.h | 3 +++ 3 files changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 96ca8b990e22..3304cf0bd9e1 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -7923,7 +7923,7 @@ CONFIG_DEBUG_INFO_COMPRESSED_NONE=y CONFIG_DEBUG_INFO_BTF=y CONFIG_PAHOLE_HAS_SPLIT_BTF=y CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y -CONFIG_DEBUG_INFO_BTF_MODULES=y +# CONFIG_DEBUG_INFO_BTF_MODULES is not set # CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set # CONFIG_GDB_SCRIPTS is not set CONFIG_FRAME_WARN=2048 diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index d95d966f7fb2..6bf96adf974a 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -9076,7 +9076,7 @@ CONFIG_DEBUG_INFO_COMPRESSED_NONE=y CONFIG_DEBUG_INFO_BTF=y CONFIG_PAHOLE_HAS_SPLIT_BTF=y CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y -CONFIG_DEBUG_INFO_BTF_MODULES=y +# CONFIG_DEBUG_INFO_BTF_MODULES is not set # CONFIG_MODULE_ALLOW_BTF_MISMATCH is not set # CONFIG_GDB_SCRIPTS is not set CONFIG_FRAME_WARN=2048 diff --git a/include/linux/module.h b/include/linux/module.h index 4db2878d9e42..990f9d66d2f1 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -516,6 +516,9 @@ struct module { #ifdef CONFIG_DEBUG_INFO_BTF_MODULES unsigned int btf_data_size; void *btf_data; +#else + KABI_DEPRECATE(unsigned int, btf_data_size) + KABI_DEPRECATE(void *, btf_data) #endif #ifdef CONFIG_JUMP_LABEL struct jump_entry *jump_entries; -- 2.34.1

2 1

[PATCH OLK-6.6] iommufd: Require drivers to supply the cache_invalidate_user ops
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Jason Gunthorpe <jgg(a)nvidia.com> stable inclusion from stable-v6.10.10 commit 89827a4de802765b1ebb401fc1e73a90108c7520 bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAU9LS CVE: CVE-2024-46824 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit a11dda723c6493bb1853bbc61c093377f96e2d47 ] If drivers don't do this then iommufd will oops invalidation ioctls with something like: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 Mem abort info: ESR = 0x0000000086000004 EC = 0x21: IABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault user pgtable: 4k pages, 48-bit VAs, pgdp=0000000101059000 [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 371 Comm: qemu-system-aar Not tainted 6.8.0-rc7-gde77230ac23a #9 Hardware name: linux,dummy-virt (DT) pstate: 81400809 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=-c) pc : 0x0 lr : iommufd_hwpt_invalidate+0xa4/0x204 sp : ffff800080f3bcc0 x29: ffff800080f3bcf0 x28: ffff0000c369b300 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 x23: 0000000000000000 x22: 00000000c1e334a0 x21: ffff0000c1e334a0 x20: ffff800080f3bd38 x19: ffff800080f3bd58 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8240d6d8 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000001000000002 x7 : 0000fffeac1ec950 x6 : 0000000000000000 x5 : ffff800080f3bd78 x4 : 0000000000000003 x3 : 0000000000000002 x2 : 0000000000000000 x1 : ffff800080f3bcc8 x0 : ffff0000c6034d80 Call trace: 0x0 iommufd_fops_ioctl+0x154/0x274 __arm64_sys_ioctl+0xac/0xf0 invoke_syscall+0x48/0x110 el0_svc_common.constprop.0+0x40/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x34/0xb4 el0t_64_sync_handler+0x120/0x12c el0t_64_sync+0x190/0x194 All existing drivers implement this op for nesting, this is mostly a bisection aid. Fixes: 8c6eabae3807 ("iommufd: Add IOMMU_HWPT_INVALIDATE") Link: https://lore.kernel.org/r/0-v1-e153859bd707+61-iommufd_check_ops_jgg@nvidia… Reviewed-by: Nicolin Chen <nicolinc(a)nvidia.com> Reviewed-by: Yi Liu <yi.l.liu(a)intel.com> Reviewed-by: Kevin Tian <kevin.tian(a)intel.com> Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/iommu/iommufd/hw_pagetable.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/iommu/iommufd/hw_pagetable.c b/drivers/iommu/iommufd/hw_pagetable.c index 33d142f8057d..a9f1fe44c4c0 100644 --- a/drivers/iommu/iommufd/hw_pagetable.c +++ b/drivers/iommu/iommufd/hw_pagetable.c @@ -236,7 +236,8 @@ iommufd_hwpt_nested_alloc(struct iommufd_ctx *ictx, } hwpt->domain->owner = ops; - if (WARN_ON_ONCE(hwpt->domain->type != IOMMU_DOMAIN_NESTED)) { + if (WARN_ON_ONCE(hwpt->domain->type != IOMMU_DOMAIN_NESTED || + !hwpt->domain->ops->cache_invalidate_user)) { rc = -EINVAL; goto out_abort; } -- 2.17.1

2 1

[PATCH openEuler-22.03-LTS-SP1] iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Wei Yongjun <weiyongjun1(a)huawei.com> stable inclusion from stable-v5.10.158 commit 5eb114f55b37dbc0487aa9c1913b81bb7837f1c4 bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREK CVE: CVE-2022-49032 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit fc92d9e3de0b2d30a3ccc08048a5fad533e4672b ] KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380 Read of size 4 at addr ffffffffc00e4658 by task cat/278 Call Trace: afe4404_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4404_channel_leds+0x18/0xffffffffffffe9c0 This issue can be reproduce by singe command: $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw The array size of afe4404_channel_leds and afe4404_channel_offdacs are less than channels, so access with chan->address cause OOB read in afe4404_[read|write]_raw. Fix it by moving access before use them. Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Acked-by: Andrew Davis <afd(a)ti.com> Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/iio/health/afe4404.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index 61fe4932d81d..0eaa34da59a8 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -250,20 +250,20 @@ static int afe4404_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - unsigned int value_reg = afe4404_channel_values[chan->address]; - unsigned int led_field = afe4404_channel_leds[chan->address]; - unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; + unsigned int value_reg, led_field, offdac_field; int ret; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_RAW: + value_reg = afe4404_channel_values[chan->address]; ret = regmap_read(afe->regmap, value_reg, val); if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: + offdac_field = afe4404_channel_offdacs[chan->address]; ret = regmap_field_read(afe->fields[offdac_field], val); if (ret) return ret; @@ -273,6 +273,7 @@ static int afe4404_read_raw(struct iio_dev *indio_dev, case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: + led_field = afe4404_channel_leds[chan->address]; ret = regmap_field_read(afe->fields[led_field], val); if (ret) return ret; @@ -295,19 +296,20 @@ static int afe4404_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - unsigned int led_field = afe4404_channel_leds[chan->address]; - unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; + unsigned int led_field, offdac_field; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_OFFSET: + offdac_field = afe4404_channel_offdacs[chan->address]; return regmap_field_write(afe->fields[offdac_field], val); } break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: + led_field = afe4404_channel_leds[chan->address]; return regmap_field_write(afe->fields[led_field], val); } break; -- 2.17.1

2 1

[PATCH OLK-5.10] media: venus: fix use after free bug in venus_remove due to race condition
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.227 commit 60b6968341a6dd5353554f3e72db554693a128a5 bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRCM CVE: CVE-2024-49981 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream. in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. Cc: stable(a)vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov(a)gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/media/platform/qcom/venus/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index 5f7ac2807e5f..c757cab6b335 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -366,6 +366,7 @@ static int venus_remove(struct platform_device *pdev) struct device *dev = core->dev; int ret; + cancel_delayed_work_sync(&core->work); ret = pm_runtime_get_sync(dev); WARN_ON(ret < 0); -- 2.17.1

2 1

[PATCH OLK-6.6] media: venus: fix use after free bug in venus_remove due to race condition
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v6.6.55 commit b0686aedc5f1343442d044bd64eeac7e7a391f4e bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRCM CVE: CVE-2024-49981 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream. in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. Cc: stable(a)vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov(a)gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/media/platform/qcom/venus/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index 054b8e74ba4f..0fc9414f8f18 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -424,6 +424,7 @@ static void venus_remove(struct platform_device *pdev) struct device *dev = core->dev; int ret; + cancel_delayed_work_sync(&core->work); ret = pm_runtime_get_sync(dev); WARN_ON(ret < 0); -- 2.17.1

2 1

[PATCH OLK-6.6 v2 0/2] bpf lts backport
by Pu Lehui 01 Nov '24

01 Nov '24

Hou Tao (1): bpf: Optimize the free of inner map Tengda Wu (1): Fix kabi breakage in struct bpf_map include/linux/bpf.h | 3 ++- kernel/bpf/core.c | 4 ++++ kernel/bpf/map_in_map.c | 14 +++++++++----- kernel/bpf/syscall.c | 8 ++++++++ kernel/bpf/verifier.c | 4 +++- 5 files changed, 26 insertions(+), 7 deletions(-) -- 2.34.1

2 3

[PATCH openEuler-1.0-LTS] media: venus: fix use after free bug in venus_remove due to race condition
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v5.10.227 commit 60b6968341a6dd5353554f3e72db554693a128a5 bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYRCM CVE: CVE-2024-49981 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit c5a85ed88e043474161bbfe54002c89c1cb50ee2 upstream. in venus_probe, core->work is bound with venus_sys_error_handler, which is used to handle error. The code use core->sys_err_done to make sync work. The core->work is started in venus_event_notify. If we call venus_remove, there might be an unfished work. The possible sequence is as follows: CPU0 CPU1 |venus_sys_error_handler venus_remove | hfi_destroy | venus_hfi_destroy | kfree(hdev); | |hfi_reinit |venus_hfi_queues_reinit |//use hdev Fix it by canceling the work in venus_remove. Cc: stable(a)vger.kernel.org Fixes: af2c3834c8ca ("[media] media: venus: adding core part and helper functions") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Dikshita Agarwal <quic_dikshita(a)quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov(a)gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco(a)xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/media/platform/qcom/venus/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/platform/qcom/venus/core.c b/drivers/media/platform/qcom/venus/core.c index 60069869596c..46dc50efc80a 100644 --- a/drivers/media/platform/qcom/venus/core.c +++ b/drivers/media/platform/qcom/venus/core.c @@ -345,6 +345,7 @@ static int venus_remove(struct platform_device *pdev) struct device *dev = core->dev; int ret; + cancel_delayed_work_sync(&core->work); ret = pm_runtime_get_sync(dev); WARN_ON(ret < 0); -- 2.17.1

2 1

[PATCH openEuler-1.0-LTS] iio: health: afe4404: Fix oob read in afe4404_[read|write]_raw
by Lin Ruifeng 01 Nov '24

01 Nov '24

From: Wei Yongjun <weiyongjun1(a)huawei.com> stable inclusion from stable-v4.19.268 commit f5575041ec15310bdc50c42b8b22118cc900226e bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREK CVE: CVE-2022-49032 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit fc92d9e3de0b2d30a3ccc08048a5fad533e4672b ] KASAN report out-of-bounds read as follows: BUG: KASAN: global-out-of-bounds in afe4404_read_raw+0x2ce/0x380 Read of size 4 at addr ffffffffc00e4658 by task cat/278 Call Trace: afe4404_read_raw iio_read_channel_info dev_attr_show The buggy address belongs to the variable: afe4404_channel_leds+0x18/0xffffffffffffe9c0 This issue can be reproduce by singe command: $ cat /sys/bus/i2c/devices/0-0058/iio\:device0/in_intensity6_raw The array size of afe4404_channel_leds and afe4404_channel_offdacs are less than channels, so access with chan->address cause OOB read in afe4404_[read|write]_raw. Fix it by moving access before use them. Fixes: b36e8257641a ("iio: health/afe440x: Use regmap fields") Signed-off-by: Wei Yongjun <weiyongjun1(a)huawei.com> Acked-by: Andrew Davis <afd(a)ti.com> Link: https://lore.kernel.org/r/20221107152010.95937-1-weiyongjun@huaweicloud.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/iio/health/afe4404.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/iio/health/afe4404.c b/drivers/iio/health/afe4404.c index 11910922e655..56ff178bd07e 100644 --- a/drivers/iio/health/afe4404.c +++ b/drivers/iio/health/afe4404.c @@ -256,20 +256,20 @@ static int afe4404_read_raw(struct iio_dev *indio_dev, int *val, int *val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - unsigned int value_reg = afe4404_channel_values[chan->address]; - unsigned int led_field = afe4404_channel_leds[chan->address]; - unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; + unsigned int value_reg, led_field, offdac_field; int ret; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_RAW: + value_reg = afe4404_channel_values[chan->address]; ret = regmap_read(afe->regmap, value_reg, val); if (ret) return ret; return IIO_VAL_INT; case IIO_CHAN_INFO_OFFSET: + offdac_field = afe4404_channel_offdacs[chan->address]; ret = regmap_field_read(afe->fields[offdac_field], val); if (ret) return ret; @@ -279,6 +279,7 @@ static int afe4404_read_raw(struct iio_dev *indio_dev, case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: + led_field = afe4404_channel_leds[chan->address]; ret = regmap_field_read(afe->fields[led_field], val); if (ret) return ret; @@ -301,19 +302,20 @@ static int afe4404_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct afe4404_data *afe = iio_priv(indio_dev); - unsigned int led_field = afe4404_channel_leds[chan->address]; - unsigned int offdac_field = afe4404_channel_offdacs[chan->address]; + unsigned int led_field, offdac_field; switch (chan->type) { case IIO_INTENSITY: switch (mask) { case IIO_CHAN_INFO_OFFSET: + offdac_field = afe4404_channel_offdacs[chan->address]; return regmap_field_write(afe->fields[offdac_field], val); } break; case IIO_CURRENT: switch (mask) { case IIO_CHAN_INFO_RAW: + led_field = afe4404_channel_leds[chan->address]; return regmap_field_write(afe->fields[led_field], val); } break; -- 2.17.1

2 1

[PATCH openEuler-1.0-LTS] serial: protect uart_port_dtr_rts() in uart_shutdown() too
by Yi Yang 01 Nov '24

01 Nov '24

From: "Jiri Slaby (SUSE)" <jirislaby(a)kernel.org> mainline inclusion from mainline-v6.12-rc1 commit 602babaa84d627923713acaf5f7e9a4369e77473 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREU CVE: CVE-2024-50058 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Conflicts: drivers/tty/serial/serial_core.c [Conflicts due to 5d4203990737("tty: Convert ->dtr_rts() to take bool argument") and 027b57170bf8("serial: core: Fix initializing and restoring termios speed") not merged] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/tty/serial/serial_core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 3faf643de752..537bcd7c4941 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -287,11 +287,13 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (uport && uart_console(uport) && tty) - uport->cons->cflag = tty->termios.c_cflag; + if (uport) { + if (uart_console(uport) && tty) + uport->cons->cflag = tty->termios.c_cflag; - if (!tty || C_HUPCL(tty)) - uart_port_dtr_rts(uport, 0); + if (!tty || C_HUPCL(tty)) + uart_port_dtr_rts(uport, 0); + } uart_port_shutdown(port); } -- 2.25.1

2 1

[PATCH OLK-5.10] serial: protect uart_port_dtr_rts() in uart_shutdown() too
by Yi Yang 01 Nov '24

01 Nov '24

From: "Jiri Slaby (SUSE)" <jirislaby(a)kernel.org> mainline inclusion from mainline-v6.12-rc1 commit 602babaa84d627923713acaf5f7e9a4369e77473 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREU CVE: CVE-2024-50058 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Conflicts: drivers/tty/serial/serial_core.c [Conflicts due to 5d4203990737("tty: Convert ->dtr_rts() to take bool argument") not merged] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/tty/serial/serial_core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c7adcf97e2a3..6d7d448d0fbf 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -286,14 +286,16 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (uport && uart_console(uport) && tty) { - uport->cons->cflag = tty->termios.c_cflag; - uport->cons->ispeed = tty->termios.c_ispeed; - uport->cons->ospeed = tty->termios.c_ospeed; - } + if (uport) { + if (uart_console(uport) && tty) { + uport->cons->cflag = tty->termios.c_cflag; + uport->cons->ispeed = tty->termios.c_ispeed; + uport->cons->ospeed = tty->termios.c_ospeed; + } - if (!tty || C_HUPCL(tty)) - uart_port_dtr_rts(uport, 0); + if (!tty || C_HUPCL(tty)) + uart_port_dtr_rts(uport, 0); + } uart_port_shutdown(port); } -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] serial: protect uart_port_dtr_rts() in uart_shutdown() too
by Yi Yang 01 Nov '24

01 Nov '24

From: "Jiri Slaby (SUSE)" <jirislaby(a)kernel.org> mainline inclusion from mainline-v6.12-rc1 commit 602babaa84d627923713acaf5f7e9a4369e77473 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAYREU CVE: CVE-2024-50058 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Commit af224ca2df29 (serial: core: Prevent unsafe uart port access, part 3) added few uport == NULL checks. It added one to uart_shutdown(), so the commit assumes, uport can be NULL in there. But right after that protection, there is an unprotected "uart_port_dtr_rts(uport, false);" call. That is invoked only if HUPCL is set, so I assume that is the reason why we do not see lots of these reports. Or it cannot be NULL at this point at all for some reason :P. Until the above is investigated, stay on the safe side and move this dereference to the if too. I got this inconsistency from Coverity under CID 1585130. Thanks. Signed-off-by: Jiri Slaby (SUSE) <jirislaby(a)kernel.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Link: https://lore.kernel.org/r/20240805102046.307511-3-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Conflicts: drivers/tty/serial/serial_core.c [Conflicts due to 5d4203990737("tty: Convert ->dtr_rts() to take bool argument") not merged] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/tty/serial/serial_core.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 827bb6b2369e..47312fe902cb 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -286,14 +286,16 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state) /* * Turn off DTR and RTS early. */ - if (uport && uart_console(uport) && tty) { - uport->cons->cflag = tty->termios.c_cflag; - uport->cons->ispeed = tty->termios.c_ispeed; - uport->cons->ospeed = tty->termios.c_ospeed; - } + if (uport) { + if (uart_console(uport) && tty) { + uport->cons->cflag = tty->termios.c_cflag; + uport->cons->ispeed = tty->termios.c_ispeed; + uport->cons->ospeed = tty->termios.c_ospeed; + } - if (!tty || C_HUPCL(tty)) - uart_port_dtr_rts(uport, 0); + if (!tty || C_HUPCL(tty)) + uart_port_dtr_rts(uport, 0); + } uart_port_shutdown(port); } -- 2.25.1

2 1

[openeuler:OLK-5.10 18689/30000] drivers/ub/urma/ubcore/ubcore_dp.c:26:5: warning: no previous prototype for 'ubcore_post_jetty_send_wr'
by kernel test robot 01 Nov '24

01 Nov '24

Hi Yizhen, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: c78205e40443cde6028b0539f30a00fda4167edd commit: 33800c2820ab85fe02800e33f6b3287130278bdf [18689/30000] ub: ubcore add data plane ops api. config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411010813.TGMdTWRa-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411010813.TGMdTWRa-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411010813.TGMdTWRa-lkp@intel.com/ All warnings (new ones prefixed by >>): >> drivers/ub/urma/ubcore/ubcore_dp.c:26:5: warning: no previous prototype for 'ubcore_post_jetty_send_wr' [-Wmissing-prototypes] 26 | int ubcore_post_jetty_send_wr(struct ubcore_jetty *jetty, const struct ubcore_jfs_wr *wr, | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:42:5: warning: no previous prototype for 'ubcore_post_jetty_recv_wr' [-Wmissing-prototypes] 42 | int ubcore_post_jetty_recv_wr(struct ubcore_jetty *jetty, const struct ubcore_jfr_wr *wr, | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:58:5: warning: no previous prototype for 'ubcore_post_jfs_wr' [-Wmissing-prototypes] 58 | int ubcore_post_jfs_wr(struct ubcore_jfs *jfs, const struct ubcore_jfs_wr *wr, | ^~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:74:5: warning: no previous prototype for 'ubcore_post_jfr_wr' [-Wmissing-prototypes] 74 | int ubcore_post_jfr_wr(struct ubcore_jfr *jfr, const struct ubcore_jfr_wr *wr, | ^~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/ubcore/ubcore_dp.c:90:5: warning: no previous prototype for 'ubcore_poll_jfc' [-Wmissing-prototypes] 90 | int ubcore_poll_jfc(struct ubcore_jfc *jfc, int cr_cnt, struct ubcore_cr *cr) | ^~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_dp.c:105:5: warning: no previous prototype for 'ubcore_rearm_jfc' [-Wmissing-prototypes] 105 | int ubcore_rearm_jfc(struct ubcore_jfc *jfc, bool solicited_only) | ^~~~~~~~~~~~~~~~ vim +/ubcore_post_jetty_send_wr +26 drivers/ub/urma/ubcore/ubcore_dp.c 25 > 26 int ubcore_post_jetty_send_wr(struct ubcore_jetty *jetty, const struct ubcore_jfs_wr *wr, 27 struct ubcore_jfs_wr **bad_wr) 28 { 29 struct ubcore_ops *dev_ops; 30 31 if (jetty == NULL || jetty->ub_dev == NULL || jetty->ub_dev->ops == NULL || 32 jetty->ub_dev->ops->post_jetty_send_wr == NULL || wr == NULL || bad_wr == NULL) { 33 ubcore_log_err("Invalid parameter"); 34 return -EINVAL; 35 } 36 37 dev_ops = jetty->ub_dev->ops; 38 return dev_ops->post_jetty_send_wr(jetty, wr, bad_wr); 39 } 40 EXPORT_SYMBOL(ubcore_post_jetty_send_wr); 41 > 42 int ubcore_post_jetty_recv_wr(struct ubcore_jetty *jetty, const struct ubcore_jfr_wr *wr, 43 struct ubcore_jfr_wr **bad_wr) 44 { 45 struct ubcore_ops *dev_ops; 46 47 if (jetty == NULL || jetty->ub_dev == NULL || jetty->ub_dev->ops == NULL || 48 jetty->ub_dev->ops->post_jetty_recv_wr == NULL || wr == NULL || bad_wr == NULL) { 49 ubcore_log_err("Invalid parameter"); 50 return -EINVAL; 51 } 52 53 dev_ops = jetty->ub_dev->ops; 54 return dev_ops->post_jetty_recv_wr(jetty, wr, bad_wr); 55 } 56 EXPORT_SYMBOL(ubcore_post_jetty_recv_wr); 57 > 58 int ubcore_post_jfs_wr(struct ubcore_jfs *jfs, const struct ubcore_jfs_wr *wr, 59 struct ubcore_jfs_wr **bad_wr) 60 { 61 struct ubcore_ops *dev_ops; 62 63 if (jfs == NULL || jfs->ub_dev == NULL || jfs->ub_dev->ops == NULL || 64 jfs->ub_dev->ops->post_jfs_wr == NULL || wr == NULL || bad_wr == NULL) { 65 ubcore_log_err("Invalid parameter"); 66 return -EINVAL; 67 } 68 69 dev_ops = jfs->ub_dev->ops; 70 return dev_ops->post_jfs_wr(jfs, wr, bad_wr); 71 } 72 EXPORT_SYMBOL(ubcore_post_jfs_wr); 73 > 74 int ubcore_post_jfr_wr(struct ubcore_jfr *jfr, const struct ubcore_jfr_wr *wr, 75 struct ubcore_jfr_wr **bad_wr) 76 { 77 struct ubcore_ops *dev_ops; 78 79 if (jfr == NULL || jfr->ub_dev == NULL || jfr->ub_dev->ops == NULL || 80 jfr->ub_dev->ops->post_jfr_wr == NULL || wr == NULL || bad_wr == NULL) { 81 ubcore_log_err("Invalid parameter"); 82 return -EINVAL; 83 } 84 85 dev_ops = jfr->ub_dev->ops; 86 return dev_ops->post_jfr_wr(jfr, wr, bad_wr); 87 } 88 EXPORT_SYMBOL(ubcore_post_jfr_wr); 89 > 90 int ubcore_poll_jfc(struct ubcore_jfc *jfc, int cr_cnt, struct ubcore_cr *cr) 91 { 92 struct ubcore_ops *dev_ops; 93 94 if (jfc == NULL || jfc->ub_dev == NULL || jfc->ub_dev->ops == NULL || 95 jfc->ub_dev->ops->poll_jfc == NULL || cr == NULL) { 96 ubcore_log_err("Invalid parameter"); 97 return -EINVAL; 98 } 99 100 dev_ops = jfc->ub_dev->ops; 101 return dev_ops->poll_jfc(jfc, cr_cnt, cr); 102 } 103 EXPORT_SYMBOL(ubcore_poll_jfc); 104 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[openeuler:OLK-5.10 18663/30000] drivers/ub/urma/ubcore/ubcore_tp.c:40:17: warning: no previous prototype for 'ubcore_get_mtu'
by kernel test robot 01 Nov '24

01 Nov '24

Hi Yizhen, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: c78205e40443cde6028b0539f30a00fda4167edd commit: 832e9fe8cf1ed02211ff43bd4f3f16ddc2d69969 [18663/30000] ub: ubcore add create/delete tp table api config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411010411.aKWhEHwD-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411010411.aKWhEHwD-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411010411.aKWhEHwD-lkp@intel.com/ All warnings (new ones prefixed by >>): >> drivers/ub/urma/ubcore/ubcore_tp.c:40:17: warning: no previous prototype for 'ubcore_get_mtu' [-Wmissing-prototypes] 40 | enum ubcore_mtu ubcore_get_mtu(int mtu) | ^~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_tp.c:75:19: warning: no previous prototype for 'ubcore_create_vtp' [-Wmissing-prototypes] 75 | struct ubcore_tp *ubcore_create_vtp(struct ubcore_device *dev, const union ubcore_eid *remote_eid, | ^~~~~~~~~~~~~~~~~ drivers/ub/urma/ubcore/ubcore_tp.c:83:5: warning: no previous prototype for 'ubcore_destroy_vtp' [-Wmissing-prototypes] 83 | int ubcore_destroy_vtp(struct ubcore_tp *vtp) | ^~~~~~~~~~~~~~~~~~ vim +/ubcore_get_mtu +40 drivers/ub/urma/ubcore/ubcore_tp.c c75b0bccca77778 Yizhen Fan 2023-09-14 39 c75b0bccca77778 Yizhen Fan 2023-09-14 @40 enum ubcore_mtu ubcore_get_mtu(int mtu) c75b0bccca77778 Yizhen Fan 2023-09-14 41 { c75b0bccca77778 Yizhen Fan 2023-09-14 42 mtu = mtu - UB_PROTOCOL_HEAD_BYTES; c75b0bccca77778 Yizhen Fan 2023-09-14 43 c75b0bccca77778 Yizhen Fan 2023-09-14 44 if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_8192)) c75b0bccca77778 Yizhen Fan 2023-09-14 45 return UBCORE_MTU_8192; c75b0bccca77778 Yizhen Fan 2023-09-14 46 if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_4096)) c75b0bccca77778 Yizhen Fan 2023-09-14 47 return UBCORE_MTU_4096; c75b0bccca77778 Yizhen Fan 2023-09-14 48 else if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_2048)) c75b0bccca77778 Yizhen Fan 2023-09-14 49 return UBCORE_MTU_2048; c75b0bccca77778 Yizhen Fan 2023-09-14 50 else if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_1024)) c75b0bccca77778 Yizhen Fan 2023-09-14 51 return UBCORE_MTU_1024; c75b0bccca77778 Yizhen Fan 2023-09-14 52 else if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_512)) c75b0bccca77778 Yizhen Fan 2023-09-14 53 return UBCORE_MTU_512; c75b0bccca77778 Yizhen Fan 2023-09-14 54 else if (mtu >= ubcore_mtu_enum_to_int(UBCORE_MTU_256)) c75b0bccca77778 Yizhen Fan 2023-09-14 55 return UBCORE_MTU_256; c75b0bccca77778 Yizhen Fan 2023-09-14 56 else c75b0bccca77778 Yizhen Fan 2023-09-14 57 return 0; c75b0bccca77778 Yizhen Fan 2023-09-14 58 } c75b0bccca77778 Yizhen Fan 2023-09-14 59 EXPORT_SYMBOL(ubcore_get_mtu); c75b0bccca77778 Yizhen Fan 2023-09-14 60 :::::: The code at line 40 was first introduced by commit :::::: c75b0bccca77778d5663004cb19d3dd31ef71f0a ub: ubcore add get_mtu and other APIs that will be used by the driver. :::::: TO: Yizhen Fan <fanyizhen(a)huawei.com> :::::: CC: fanyizhen1995 <en_0015767(a)163.com> -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[openeuler:openEuler-1.0-LTS 15253/23924] arch/arm64/kernel/mpam/mpam_resctrl.c:358:1: warning: conflicting types for 'mpam_get_raw_resctrl_resource' due to enum/integer mismatch; have 'struct raw_resctrl_resource *(enum resctrl_resource_level)'
by kernel test robot 01 Nov '24

01 Nov '24

tree: https://gitee.com/openeuler/kernel.git openEuler-1.0-LTS head: e73db5f1f4d00d788085541fcfcb33402ee9221c commit: a453ee059c9d7c7372b6f413ef152b9ea8ee800e [15253/23924] arm64/mpam: Init resctrl resources' info from resctrl_res selected config: arm64-randconfig-001-20241029 (https://download.01.org/0day-ci/archive/20241101/202411010258.ysot0OR8-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411010258.ysot0OR8-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411010258.ysot0OR8-lkp@intel.com/ All warnings (new ones prefixed by >>): >> arch/arm64/kernel/mpam/mpam_resctrl.c:358:1: warning: conflicting types for 'mpam_get_raw_resctrl_resource' due to enum/integer mismatch; have 'struct raw_resctrl_resource *(enum resctrl_resource_level)' [-Wenum-int-mismatch] 358 | mpam_get_raw_resctrl_resource(enum resctrl_resource_level level) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from arch/arm64/kernel/mpam/mpam_resctrl.c:47: arch/arm64/kernel/mpam/mpam_internal.h:127:1: note: previous declaration of 'mpam_get_raw_resctrl_resource' with type 'struct raw_resctrl_resource *(u32)' {aka 'struct raw_resctrl_resource *(unsigned int)'} 127 | mpam_get_raw_resctrl_resource(u32 level); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_resctrl.c:784:5: warning: no previous prototype for 'cpus_ctrl_write' [-Wmissing-prototypes] 784 | int cpus_ctrl_write(struct rdtgroup *rdtgrp, cpumask_var_t newmask, | ^~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_resctrl.c:872:5: warning: no previous prototype for 'cpus_mon_write' [-Wmissing-prototypes] 872 | int cpus_mon_write(struct rdtgroup *rdtgrp, cpumask_var_t newmask, | ^~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_resctrl.c: In function 'rdt_last_cmd_printf': arch/arm64/kernel/mpam/mpam_resctrl.c:1016:9: warning: function 'rdt_last_cmd_printf' might be a candidate for 'gnu_printf' format attribute [-Wsuggest-attribute=format] 1016 | seq_buf_vprintf(&last_cmd_status, fmt, ap); | ^~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_resctrl.c: At top level: arch/arm64/kernel/mpam/mpam_resctrl.c:1089:5: warning: no previous prototype for 'resctrl_ctrlmon_enable' [-Wmissing-prototypes] 1089 | int resctrl_ctrlmon_enable(struct kernfs_node *parent_kn, | ^~~~~~~~~~~~~~~~~~~~~~ arch/arm64/kernel/mpam/mpam_resctrl.c:1117:6: warning: no previous prototype for 'resctrl_ctrlmon_disable' [-Wmissing-prototypes] 1117 | void resctrl_ctrlmon_disable(struct kernfs_node *kn_mondata, | ^~~~~~~~~~~~~~~~~~~~~~~ vim +358 arch/arm64/kernel/mpam/mpam_resctrl.c 356 357 struct raw_resctrl_resource * > 358 mpam_get_raw_resctrl_resource(enum resctrl_resource_level level) 359 { 360 if (level >= RDT_NUM_RESOURCES) 361 return NULL; 362 363 return &raw_resctrl_resources_all[level]; 364 } 365 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[openeuler:OLK-5.10 18659/30000] drivers/ub/urma/uburma/uburma_cmd.c:180:6: warning: no previous prototype for 'uburma_jetty_event_cb'
by kernel test robot 01 Nov '24

01 Nov '24

Hi Yizhen, FYI, the error/warning still remains. tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: c78205e40443cde6028b0539f30a00fda4167edd commit: c3af5be3e72710b357d9f23a5bdcafe8f96d6dfd [18659/30000] ub: uburma add cmd create jetty implementation. config: arm64-randconfig-003-20241029 (https://download.01.org/0day-ci/archive/20241101/202411010152.inffSTWn-lkp@…) compiler: aarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241101/202411010152.inffSTWn-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202411010152.inffSTWn-lkp@intel.com/ All warnings (new ones prefixed by >>): drivers/ub/urma/uburma/uburma_cmd.c:144:6: warning: no previous prototype for 'uburma_jfc_event_cb' [-Wmissing-prototypes] 144 | void uburma_jfc_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ drivers/ub/urma/uburma/uburma_cmd.c:156:6: warning: no previous prototype for 'uburma_jfs_event_cb' [-Wmissing-prototypes] 156 | void uburma_jfs_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ drivers/ub/urma/uburma/uburma_cmd.c:168:6: warning: no previous prototype for 'uburma_jfr_event_cb' [-Wmissing-prototypes] 168 | void uburma_jfr_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~ >> drivers/ub/urma/uburma/uburma_cmd.c:180:6: warning: no previous prototype for 'uburma_jetty_event_cb' [-Wmissing-prototypes] 180 | void uburma_jetty_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) | ^~~~~~~~~~~~~~~~~~~~~ vim +/uburma_jetty_event_cb +180 drivers/ub/urma/uburma/uburma_cmd.c 179 > 180 void uburma_jetty_event_cb(struct ubcore_event *event, struct ubcore_ucontext *ctx) 181 { 182 struct uburma_jetty_uobj *jetty_uobj; 183 184 if (event->element.jetty == NULL) 185 return; 186 187 jetty_uobj = (struct uburma_jetty_uobj *)event->element.jetty->jetty_cfg.jetty_context; 188 uburma_write_async_event(ctx, event->element.jetty->urma_jetty, event->event_type, 189 &jetty_uobj->async_event_list, &jetty_uobj->async_events_reported); 190 } 191 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[openeuler:OLK-5.10 19333/30000] fs/ext4/fast_commit.o: warning: objtool: __ext4_fc_track_unlink()+0x275: unreachable instruction
by kernel test robot 31 Oct '24

31 Oct '24

tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: c67d418d86fea7b8c2a11c7273229ffb0a7a57ed commit: f2c902d8c653f8021f9761092a27f7b9db42b662 [19333/30000] tracing: Make tracepoint lockdep check actually test something config: x86_64-buildonly-randconfig-001-20241030 (https://download.01.org/0day-ci/archive/20241031/202410312220.K72H6v5s-lkp@…) compiler: clang version 19.1.2 (https://github.com/llvm/llvm-project 7ba7d8e2f7b6445b60679da826210cdde29eaf8b) reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20241031/202410312220.K72H6v5s-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202410312220.K72H6v5s-lkp@intel.com/ All warnings (new ones prefixed by >>): >> fs/ext4/fast_commit.o: warning: objtool: __ext4_fc_track_unlink()+0x275: unreachable instruction -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-1.0-LTS] NFSv4: release seqid when open failed for nfs4.0
by Li Lingfeng 31 Oct '24

31 Oct '24

From: Yang Erkun <yangerkun(a)huaweicloud.com> hulk inclusion category: bugfix bugzilla: http://openeuler.huawei.com/bugzilla/show_bug.cgi?id=190327 CVE: NA -------------------------------- Two threads that work with the same cred try to open different files concurrently, they will utilize the same nfs4_state_owner. And in order to sequential open request send to server, the second task will fall into RPC_TASK_QUEUED in nfs_wait_on_sequence since there is already one work doing the open operation. Furthermore, the second task will wait until the first task completes its work, call rpc_wake_up_queued_task in nfs_release_seqid to wake up the second task, allowing it to complete the remaining open operation. The preceding logic does not cause any problems under normal circumstances. However, when once we force an unmount using `umount -f`, the function nfs_umount_begin attempts to kill all tasks by calling rpc_signal_task. This help wake up the second task, but it sets the status to -ERESTARTSYS. This status prevents `nfs4_open_release` from calling `nfs4_opendata_to_nfs4_state`. Consequently, while the second task will be freed, the original tasks will still exist in sequence->list(see nfs_release_seqid). Latter, when the first thread calls nfs_release_seqid and attempts to wake up the second task, it will trigger the uaf. To resolve this issue, ensure rpc_task will remove it from sequence->list in nfs4_open_release when open failed, besides, we can only wakeup the next rpc_task, or use-after-free will happen too since privious rpc_task may be released too. ================================================================== BUG: KASAN: slab-use-after-free in rpc_wake_up_queued_task+0xbb/0xc0 Read of size 8 at addr ff11000007639930 by task bash/792 CPU: 0 UID: 0 PID: 792 Comm: bash Tainted: G B W 6.11.0-09960-gd10b58fe53dc-dirty #10 Tainted: [B]=BAD_PAGE, [W]=WARN Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xa3/0x120 print_address_description.constprop.0+0x63/0x510 print_report+0xf5/0x360 kasan_report+0xd9/0x140 __asan_report_load8_noabort+0x24/0x40 rpc_wake_up_queued_task+0xbb/0xc0 nfs_release_seqid+0x1e1/0x2f0 nfs_free_seqid+0x1a/0x40 nfs4_opendata_free+0xc6/0x3e0 _nfs4_do_open.isra.0+0xbe3/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e ... Allocated by task 767: kasan_save_stack+0x3b/0x70 kasan_save_track+0x1c/0x40 kasan_save_alloc_info+0x44/0x70 __kasan_slab_alloc+0xaf/0xc0 kmem_cache_alloc_noprof+0x1e0/0x4f0 rpc_new_task+0xe7/0x220 rpc_run_task+0x27/0x7d0 nfs4_run_open_task+0x477/0x810 _nfs4_proc_open+0xc0/0x6d0 _nfs4_open_and_get_state+0x178/0xc50 _nfs4_do_open.isra.0+0x47f/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Freed by task 767: kasan_save_stack+0x3b/0x70 kasan_save_track+0x1c/0x40 kasan_save_free_info+0x43/0x80 __kasan_slab_free+0x4f/0x90 kmem_cache_free+0x199/0x4f0 mempool_free_slab+0x1f/0x30 mempool_free+0xdf/0x3d0 rpc_free_task+0x12d/0x180 rpc_final_put_task+0x10e/0x150 rpc_do_put_task+0x63/0x80 rpc_put_task+0x18/0x30 nfs4_run_open_task+0x4f4/0x810 _nfs4_proc_open+0xc0/0x6d0 _nfs4_open_and_get_state+0x178/0xc50 _nfs4_do_open.isra.0+0x47f/0x1380 nfs4_do_open+0x28b/0x620 nfs4_atomic_open+0x2c6/0x3a0 nfs_atomic_open+0x4f8/0x1180 atomic_open+0x186/0x4e0 lookup_open.isra.0+0x3e7/0x15b0 open_last_lookups+0x85d/0x1260 path_openat+0x151/0x7b0 do_filp_open+0x1e0/0x310 do_sys_openat2+0x178/0x1f0 do_sys_open+0xa2/0x100 __x64_sys_openat+0xa8/0x120 x64_sys_call+0x2507/0x4540 do_syscall_64+0xa7/0x240 entry_SYSCALL_64_after_hwframe+0x76/0x7e Fixes: 24ac23ab88df ("NFSv4: Convert open() into an asynchronous RPC call") Signed-off-by: Yang Erkun <yangerkun(a)huaweicloud.com> Signed-off-by: Li Lingfeng <lilingfeng3(a)huawei.com> --- fs/nfs/nfs4_fs.h | 1 + fs/nfs/nfs4proc.c | 2 ++ fs/nfs/nfs4state.c | 18 ++++++++++++++++++ 3 files changed, 21 insertions(+) diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index d22176d87448..586428cca20b 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -505,6 +505,7 @@ extern struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter, gfp_ extern int nfs_wait_on_sequence(struct nfs_seqid *seqid, struct rpc_task *task); extern void nfs_increment_open_seqid(int status, struct nfs_seqid *seqid); extern void nfs_increment_lock_seqid(int status, struct nfs_seqid *seqid); +extern void nfs_release_seqid_inorder(struct nfs_seqid *seqid); extern void nfs_release_seqid(struct nfs_seqid *seqid); extern void nfs_free_seqid(struct nfs_seqid *seqid); extern int nfs4_setup_sequence(struct nfs_client *client, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index ef9e80928f2a..b19a738dd2e1 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -2411,6 +2411,8 @@ static void nfs4_open_release(void *calldata) struct nfs4_opendata *data = calldata; struct nfs4_state *state = NULL; + if (data->rpc_status != 0 || !data->rpc_done) + nfs_release_seqid_inorder(data->o_arg.seqid); /* If this request hasn't been cancelled, do nothing */ if (!data->cancelled) goto out_free; diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index c843917f8e2c..6a5479453256 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1103,6 +1103,24 @@ struct nfs_seqid *nfs_alloc_seqid(struct nfs_seqid_counter *counter, gfp_t gfp_m return new; } +void nfs_release_seqid_inorder(struct nfs_seqid *seqid) +{ + struct nfs_seqid_counter *sequence; + + if (seqid == NULL || list_empty(&seqid->list)) + return; + sequence = seqid->sequence; + spin_lock(&sequence->lock); + if (!list_is_last(&seqid->list, &sequence->list)) { + struct nfs_seqid *next; + + next = list_next_entry(seqid, list); + rpc_wake_up_queued_task(&sequence->wait, next->task); + } + list_del_init(&seqid->list); + spin_unlock(&sequence->lock); +} + void nfs_release_seqid(struct nfs_seqid *seqid) { struct nfs_seqid_counter *sequence; -- 2.31.1

2 1