- Kernel - mailweb.openeuler.org

[PATCH V3 OLK-5.10] vhost-vdpa: add reset state params to indicate reset level
by Jiang Dongxu 29 Nov '23

29 Nov '23

From: jiangdongxu <jiangdongxu1(a)huawei.com> virt inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I86ITO ---------------------------------------------------------------------- Add the interface parameter state to the vdpa reset interface, which respectively identifies the reset when the device is turned on/off and the virtio reset issued by the virtual machine. Signed-off-by: jiangdongxu <jiangdongxu1(a)huawei.com> --- drivers/vdpa/ifcvf/ifcvf_main.c | 2 +- drivers/vdpa/mlx5/net/mlx5_vnet.c | 2 +- drivers/vdpa/vdpa_sim/vdpa_sim.c | 2 +- drivers/vdpa/virtio_pci/vp_vdpa.c | 2 +- drivers/vhost/vdpa.c | 10 +++++----- drivers/virtio/virtio_vdpa.c | 2 +- include/linux/vdpa.h | 16 +++++++++++++--- 7 files changed, 23 insertions(+), 13 deletions(-) diff --git a/drivers/vdpa/ifcvf/ifcvf_main.c b/drivers/vdpa/ifcvf/ifcvf_main.c index 862f4591fff2..2a4991464cfd 100644 --- a/drivers/vdpa/ifcvf/ifcvf_main.c +++ b/drivers/vdpa/ifcvf/ifcvf_main.c @@ -233,7 +233,7 @@ static void ifcvf_vdpa_set_status(struct vdpa_device *vdpa_dev, u8 status) ifcvf_set_status(vf, status); } -static int ifcvf_vdpa_reset(struct vdpa_device *vdpa_dev) +static int ifcvf_vdpa_reset(struct vdpa_device *vdpa_dev, int state) { struct ifcvf_adapter *adapter; struct ifcvf_hw *vf; diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c index 76e7b4bab9d3..c676bb70a453 100644 --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c @@ -1800,7 +1800,7 @@ static void mlx5_vdpa_set_status(struct vdpa_device *vdev, u8 status) ndev->mvdev.status |= VIRTIO_CONFIG_S_FAILED; } -static int mlx5_vdpa_reset(struct vdpa_device *vdev) +static int mlx5_vdpa_reset(struct vdpa_device *vdev, int state) { struct mlx5_vdpa_dev *mvdev = to_mvdev(vdev); struct mlx5_vdpa_net *ndev = to_mlx5_vdpa_ndev(mvdev); diff --git a/drivers/vdpa/vdpa_sim/vdpa_sim.c b/drivers/vdpa/vdpa_sim/vdpa_sim.c index c141f08b8274..be925462922d 100644 --- a/drivers/vdpa/vdpa_sim/vdpa_sim.c +++ b/drivers/vdpa/vdpa_sim/vdpa_sim.c @@ -454,7 +454,7 @@ static void vdpasim_set_status(struct vdpa_device *vdpa, u8 status) spin_unlock(&vdpasim->lock); } -static int vdpasim_reset(struct vdpa_device *vdpa) +static int vdpasim_reset(struct vdpa_device *vdpa, int state) { struct vdpasim *vdpasim = vdpa_to_sim(vdpa); diff --git a/drivers/vdpa/virtio_pci/vp_vdpa.c b/drivers/vdpa/virtio_pci/vp_vdpa.c index f4e375b1d903..bc0bdcc7bcea 100644 --- a/drivers/vdpa/virtio_pci/vp_vdpa.c +++ b/drivers/vdpa/virtio_pci/vp_vdpa.c @@ -220,7 +220,7 @@ static void vp_vdpa_set_status(struct vdpa_device *vdpa, u8 status) vp_modern_set_status(mdev, status); } -static int vp_vdpa_reset(struct vdpa_device *vdpa) +static int vp_vdpa_reset(struct vdpa_device *vdpa, int state) { struct vp_vdpa *vp_vdpa = vdpa_to_vp(vdpa); struct virtio_pci_modern_device *mdev = vp_vdpa_to_mdev(vp_vdpa); diff --git a/drivers/vhost/vdpa.c b/drivers/vhost/vdpa.c index eec8027dfc4f..eed51d004531 100644 --- a/drivers/vhost/vdpa.c +++ b/drivers/vhost/vdpa.c @@ -212,13 +212,13 @@ static void vhost_vdpa_unsetup_vq_irq(struct vhost_vdpa *v, u16 qid) irq_bypass_unregister_producer(&vq->call_ctx.producer); } -static int vhost_vdpa_reset(struct vhost_vdpa *v) +static int vhost_vdpa_reset(struct vhost_vdpa *v, int state) { struct vdpa_device *vdpa = v->vdpa; v->in_batch = 0; - return vdpa_reset(vdpa); + return vdpa_reset(vdpa, state); } static long vhost_vdpa_bind_mm(struct vhost_vdpa *v) @@ -297,7 +297,7 @@ static long vhost_vdpa_set_status(struct vhost_vdpa *v, u8 __user *statusp) vhost_vdpa_unsetup_vq_irq(v, i); if (status == 0) { - ret = vdpa_reset(vdpa); + ret = vdpa_reset(vdpa, VDPA_DEV_RESET_VIRTIO); if (ret) return ret; } else @@ -1496,7 +1496,7 @@ static int vhost_vdpa_open(struct inode *inode, struct file *filep) return r; nvqs = v->nvqs; - r = vhost_vdpa_reset(v); + r = vhost_vdpa_reset(v, VDPA_DEV_RESET_OPEN); if (r) goto err; @@ -1542,7 +1542,7 @@ static int vhost_vdpa_release(struct inode *inode, struct file *filep) mutex_lock(&d->mutex); filep->private_data = NULL; vhost_vdpa_clean_irq(v); - vhost_vdpa_reset(v); + vhost_vdpa_reset(v, VDPA_DEV_RESET_CLOSE); vhost_dev_stop(&v->vdev); vhost_vdpa_unbind_mm(v); vhost_vdpa_config_put(v); diff --git a/drivers/virtio/virtio_vdpa.c b/drivers/virtio/virtio_vdpa.c index 46c71653f508..8126a9be22cd 100644 --- a/drivers/virtio/virtio_vdpa.c +++ b/drivers/virtio/virtio_vdpa.c @@ -99,7 +99,7 @@ static void virtio_vdpa_reset(struct virtio_device *vdev) { struct vdpa_device *vdpa = vd_get_vdpa(vdev); - vdpa_reset(vdpa); + vdpa_reset(vdpa, VDPA_DEV_RESET_VIRTIO); } static bool virtio_vdpa_notify(struct virtqueue *vq) diff --git a/include/linux/vdpa.h b/include/linux/vdpa.h index 83df2380eeb9..ef53829c7a7a 100644 --- a/include/linux/vdpa.h +++ b/include/linux/vdpa.h @@ -120,6 +120,12 @@ struct vdpa_map_file { u64 offset; }; +enum vdpa_reset_state { + VDPA_DEV_RESET_VIRTIO = 0, + VDPA_DEV_RESET_OPEN = 1, + VDPA_DEV_RESET_CLOSE = 2, +}; + /** * struct vdpa_config_ops - operations for configuring a vDPA device. * Note: vDPA device drivers are required to implement all of the @@ -218,6 +224,10 @@ struct vdpa_map_file { * @status: virtio device status * @reset: Reset device * @vdev: vdpa device + * @state: state for reset + * VDPA_DEV_RESET_VIRTIO for virtio reset + * VDPA_DEV_RESET_OPEN for vhost-vdpa device open + * VDPA_DEV_RESET_CLOSE for vhost-vdpa device close * Returns integer: success (0) or error (< 0) * @suspend: Suspend the device (optional) * @vdev: vdpa device @@ -359,7 +369,7 @@ struct vdpa_config_ops { u32 (*get_vendor_id)(struct vdpa_device *vdev); u8 (*get_status)(struct vdpa_device *vdev); void (*set_status)(struct vdpa_device *vdev, u8 status); - int (*reset)(struct vdpa_device *vdev); + int (*reset)(struct vdpa_device *vdev, int state); int (*suspend)(struct vdpa_device *vdev); int (*resume)(struct vdpa_device *vdev); size_t (*get_config_size)(struct vdpa_device *vdev); @@ -482,14 +492,14 @@ static inline struct device *vdpa_get_dma_dev(struct vdpa_device *vdev) return vdev->dma_dev; } -static inline int vdpa_reset(struct vdpa_device *vdev) +static inline int vdpa_reset(struct vdpa_device *vdev, int state) { const struct vdpa_config_ops *ops = vdev->config; int ret; down_write(&vdev->cf_lock); vdev->features_valid = false; - ret = ops->reset(vdev); + ret = ops->reset(vdev, state); up_write(&vdev->cf_lock); return ret; } -- 2.27.0

2 1

[PATCH OLK-5.10 v3 00/10] rcu: Add RCU stall diagnosis information
by Zhen Lei 29 Nov '23

29 Nov '23

v2 --> v3: Add "# CONFIG_RCU_CPU_STALL_CPUTIME is not set" into openeuler_defconfig. v1 --> v2: Remove patch 1 in v1: rcu: Prevent lockdep-RCU splats on lock acquisition/release It had arleady been merged. v1: In some extreme cases, such as the I/O pressure test, the CPU usage may be 100%, causing RCU stall. In this case, the printed information about current is not useful. Displays the number and usage of hard interrupts, soft interrupts, and context switches that are generated within half of the CPU stall timeout, can help us make a general judgment. In other cases, we can preliminarily determine whether an infinite loop occurs when local_irq, local_bh or preempt is disabled. Neeraj Upadhyay (1): rcu: Check and report missed fqs timer wakeup on RCU stall Paul E. McKenney (2): rcu: For RCU grace-period kthread starvation, dump last CPU it ran on rcu: Do not NMI offline CPUs Zhen Lei (7): sched/debug: Try trigger_single_cpu_backtrace(cpu) in dump_cpu_task() sched/debug: Show the registers of 'current' in dump_cpu_task() sched: Add helper kstat_cpu_softirqs_sum() sched: Add helper nr_context_switches_cpu() rcu: Add RCU stall diagnosis information rcu: Align the output of RCU CPU stall warning messages config: update openeuler_defconfig for arm64 and x86 Documentation/RCU/stallwarn.rst | 23 ++++- .../admin-guide/kernel-parameters.txt | 6 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/kernel_stat.h | 12 +++ kernel/rcu/Kconfig.debug | 13 +++ kernel/rcu/rcu.h | 1 + kernel/rcu/tree.c | 43 +++++++--- kernel/rcu/tree.h | 19 ++++ kernel/rcu/tree_stall.h | 86 +++++++++++++++++-- kernel/rcu/update.c | 2 + kernel/sched/core.c | 19 ++++ kernel/smp.c | 3 +- 13 files changed, 211 insertions(+), 18 deletions(-) -- 2.25.1

2 11

[PATCH v3 OLK-5.10 0/3] support page eject
by Wupeng Ma 29 Nov '23

29 Nov '23

From: Ma Wupeng <mawupeng1(a)huawei.com> Page ejection is achieved by soft_offline_page and unpoison_memory. A linked list is maintained to log the pfns which are offlined by this module. Only the pfns present in the list is allowed to go online. The follow sysfs is introduced to online/offline page via this module, since there is a internal linked list to record all offlined pages, remove_page is introduced when a user no longer wishes to online this particular page. To reduce the length of the internal list, this function removes the specified page from the list. - /sys/kernel/page_eject/online_page - /sys/kernel/page_eject/offline_page - /sys/kernel/page_eject/remove_page Changelog since v2: - bugfix for page_eject_clear_list_locked Changelog since v1: - remove mce related patches temporarily. Ma Wupeng (3): mm/hwpoison: Export symbol soft_offline_page mm: page_eject: Introuduce page ejection config: update defconfig for PAGE_EJECT arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/ras/Kconfig | 10 + drivers/ras/Makefile | 1 + drivers/ras/page_eject.c | 248 +++++++++++++++++++++++++ mm/memory-failure.c | 1 + 6 files changed, 262 insertions(+) create mode 100644 drivers/ras/page_eject.c -- 2.25.1

2 4

[PATCH OLK-6.6 0/9] mm: PCP high auto-tuning
by Ze Zuo 29 Nov '23

29 Nov '23

The page allocation performance requirements of different workloads are often different. So, we need to tune the PCP (Per-CPU Pageset) high on each CPU automatically to optimize the page allocation performance. The list of patches in series is as follows, [1/9] mm, pcp: avoid to drain PCP when process exit [2/9] cacheinfo: calculate per-CPU data cache size [3/9] mm, pcp: reduce lock contention for draining high-order pages [4/9] mm: restrict the pcp batch scale factor to avoid too long latency [5/9] mm, page_alloc: scale the number of pages that are batch allocated [6/9] mm: add framework for PCP high auto-tuning [7/9] mm: tune PCP high automatically [8/9] mm, pcp: decrease PCP high if free pages < high watermark [9/9] mm, pcp: reduce detecting time of consecutive high order page freeing Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive high-order pages freeing. Patch [4/9], [5/9] optimize batch freeing and allocating. Patch [6/9], [7/9], [8/9] implement and optimize a PCP high auto-tuning method. Patch [9/9] optimize the PCP draining for consecutive high order page freeing based on PCP high auto-tuning. The test results for patches with performance impact are as follows, kbuild ====== On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances in parallel (each with `make -j 28`) in 8 cgroup. This simulates the kbuild server that is used by 0-Day kbuild service. build time lock contend% free_high alloc_zone ---------- ---------- --------- ---------- base 100.0 14.0 100.0 100.0 patch1 99.5 12.8 19.5 95.6 patch3 99.4 12.6 7.1 95.6 patch5 98.6 11.0 8.1 97.1 patch7 95.1 0.5 2.8 15.6 patch9 95.0 1.0 8.8 20.0 The PCP draining optimization (patch [1/9], [3/9]) and PCP batch allocation optimization (patch [5/9]) reduces zone lock contention a little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time visibly. Where the tuning target: the number of pages allocated from zone reduces greatly. So, the zone contention cycles% reduces greatly. With PCP tuning patches (patch [7/9], [9/9]), the average used memory during test increases up to 18.4% because more pages are cached in PCP. But at the end of the test, the number of the used memory decreases to the same level as that of the base patch. That is, the pages cached in PCP will be released to zone after not being used actively. netperf SCTP_STREAM_MANY ======================== On a 2-socket Intel server with 128 logical CPU, we tested SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes. score lock contend% free_high alloc_zone cache miss rate% ----- ---------- --------- ---------- ---------------- base 100.0 2.1 100.0 100.0 1.3 patch1 99.4 2.1 99.4 99.4 1.3 patch3 106.4 1.3 13.3 106.3 1.3 patch5 106.0 1.2 13.2 105.9 1.3 patch7 103.4 1.9 6.7 90.3 7.6 patch9 108.6 1.3 13.7 108.6 1.3 The PCP draining optimization (patch [1/9]+[3/9]) improves performance. The PCP high auto-tuning (patch [7/9]) reduces performance a little because PCP draining cannot be triggered in time sometimes. So, the cache miss rate% increases. The further PCP draining optimization (patch [9/9]) based on PCP tuning restore the performance. lmbench3 UNIX (AF_UNIX) ======================= On a 2-socket Intel server with 128 logical CPU, we tested UNIX (AF_UNIX socket) test case of lmbench3 test suite with 16-pair processes. score lock contend% free_high alloc_zone cache miss rate% ----- ---------- --------- ---------- ---------------- base 100.0 51.4 100.0 100.0 0.2 patch1 116.8 46.1 69.5 104.3 0.2 patch3 199.1 21.3 7.0 104.9 0.2 patch5 200.0 20.8 7.1 106.9 0.3 patch7 191.6 19.9 6.8 103.8 2.8 patch9 193.4 21.7 7.0 104.7 2.1 The PCP draining optimization (patch [1/9], [3/9]) improves performance much. The PCP tuning (patch [7/9]) reduces performance a little because PCP draining cannot be triggered in time sometimes. The further PCP draining optimization (patch [9/9]) based on PCP tuning restores the performance partly. The patchset adds several fields in struct per_cpu_pages. The struct layout before/after the patchset is as follows, base ==== struct per_cpu_pages { spinlock_t lock; /* 0 4 */ int count; /* 4 4 */ int high; /* 8 4 */ int batch; /* 12 4 */ short int free_factor; /* 16 2 */ short int expire; /* 18 2 */ /* XXX 4 bytes hole, try to pack */ struct list_head lists[13]; /* 24 208 */ /* size: 256, cachelines: 4, members: 7 */ /* sum members: 228, holes: 1, sum holes: 4 */ /* padding: 24 */ } __attribute__((__aligned__(64))); patched ======= struct per_cpu_pages { spinlock_t lock; /* 0 4 */ int count; /* 4 4 */ int high; /* 8 4 */ int high_min; /* 12 4 */ int high_max; /* 16 4 */ int batch; /* 20 4 */ u8 flags; /* 24 1 */ u8 alloc_factor; /* 25 1 */ u8 expire; /* 26 1 */ /* XXX 1 byte hole, try to pack */ short int free_count; /* 28 2 */ /* XXX 2 bytes hole, try to pack */ struct list_head lists[13]; /* 32 208 */ /* size: 256, cachelines: 4, members: 11 */ /* sum members: 237, holes: 2, sum holes: 3 */ /* padding: 16 */ } __attribute__((__aligned__(64))); The size of the struct doesn't changed with the patchset. Huang Ying (9): mm, pcp: avoid to drain PCP when process exit cacheinfo: calculate size of per-CPU data cache slice mm, pcp: reduce lock contention for draining high-order pages mm: restrict the pcp batch scale factor to avoid too long latency mm, page_alloc: scale the number of pages that are batch allocated mm: add framework for PCP high auto-tuning mm: tune PCP high automatically mm, pcp: decrease PCP high if free pages < high watermark mm, pcp: reduce detecting time of consecutive high order page freeing drivers/base/cacheinfo.c | 51 ++++++- include/linux/cacheinfo.h | 1 + include/linux/gfp.h | 2 + include/linux/mmzone.h | 27 +++- mm/Kconfig | 11 ++ mm/page_alloc.c | 310 +++++++++++++++++++++++++++++++------- mm/vmstat.c | 8 +- 7 files changed, 345 insertions(+), 65 deletions(-) -- 2.25.1

2 10

[PATCH OLK-6.6 0/9] mm: PCP high auto-tuning
by Ze Zuo 29 Nov '23

29 Nov '23

The page allocation performance requirements of different workloads are often different. So, we need to tune the PCP (Per-CPU Pageset) high on each CPU automatically to optimize the page allocation performance. The list of patches in series is as follows, [1/9] mm, pcp: avoid to drain PCP when process exit [2/9] cacheinfo: calculate per-CPU data cache size [3/9] mm, pcp: reduce lock contention for draining high-order pages [4/9] mm: restrict the pcp batch scale factor to avoid too long latency [5/9] mm, page_alloc: scale the number of pages that are batch allocated [6/9] mm: add framework for PCP high auto-tuning [7/9] mm: tune PCP high automatically [8/9] mm, pcp: decrease PCP high if free pages < high watermark [9/9] mm, pcp: reduce detecting time of consecutive high order page freeing Patch [1/9], [2/9], [3/9] optimize the PCP draining for consecutive high-order pages freeing. Patch [4/9], [5/9] optimize batch freeing and allocating. Patch [6/9], [7/9], [8/9] implement and optimize a PCP high auto-tuning method. Patch [9/9] optimize the PCP draining for consecutive high order page freeing based on PCP high auto-tuning. The test results for patches with performance impact are as follows, kbuild ====== On a 2-socket Intel server with 224 logical CPU, we run 8 kbuild instances in parallel (each with `make -j 28`) in 8 cgroup. This simulates the kbuild server that is used by 0-Day kbuild service. build time lock contend% free_high alloc_zone ---------- ---------- --------- ---------- base 100.0 14.0 100.0 100.0 patch1 99.5 12.8 19.5 95.6 patch3 99.4 12.6 7.1 95.6 patch5 98.6 11.0 8.1 97.1 patch7 95.1 0.5 2.8 15.6 patch9 95.0 1.0 8.8 20.0 The PCP draining optimization (patch [1/9], [3/9]) and PCP batch allocation optimization (patch [5/9]) reduces zone lock contention a little. The PCP high auto-tuning (patch [7/9], [9/9]) reduces build time visibly. Where the tuning target: the number of pages allocated from zone reduces greatly. So, the zone contention cycles% reduces greatly. With PCP tuning patches (patch [7/9], [9/9]), the average used memory during test increases up to 18.4% because more pages are cached in PCP. But at the end of the test, the number of the used memory decreases to the same level as that of the base patch. That is, the pages cached in PCP will be released to zone after not being used actively. netperf SCTP_STREAM_MANY ======================== On a 2-socket Intel server with 128 logical CPU, we tested SCTP_STREAM_MANY test case of netperf test suite with 64-pair processes. score lock contend% free_high alloc_zone cache miss rate% ----- ---------- --------- ---------- ---------------- base 100.0 2.1 100.0 100.0 1.3 patch1 99.4 2.1 99.4 99.4 1.3 patch3 106.4 1.3 13.3 106.3 1.3 patch5 106.0 1.2 13.2 105.9 1.3 patch7 103.4 1.9 6.7 90.3 7.6 patch9 108.6 1.3 13.7 108.6 1.3 The PCP draining optimization (patch [1/9]+[3/9]) improves performance. The PCP high auto-tuning (patch [7/9]) reduces performance a little because PCP draining cannot be triggered in time sometimes. So, the cache miss rate% increases. The further PCP draining optimization (patch [9/9]) based on PCP tuning restore the performance. lmbench3 UNIX (AF_UNIX) ======================= On a 2-socket Intel server with 128 logical CPU, we tested UNIX (AF_UNIX socket) test case of lmbench3 test suite with 16-pair processes. score lock contend% free_high alloc_zone cache miss rate% ----- ---------- --------- ---------- ---------------- base 100.0 51.4 100.0 100.0 0.2 patch1 116.8 46.1 69.5 104.3 0.2 patch3 199.1 21.3 7.0 104.9 0.2 patch5 200.0 20.8 7.1 106.9 0.3 patch7 191.6 19.9 6.8 103.8 2.8 patch9 193.4 21.7 7.0 104.7 2.1 The PCP draining optimization (patch [1/9], [3/9]) improves performance much. The PCP tuning (patch [7/9]) reduces performance a little because PCP draining cannot be triggered in time sometimes. The further PCP draining optimization (patch [9/9]) based on PCP tuning restores the performance partly. The patchset adds several fields in struct per_cpu_pages. The struct layout before/after the patchset is as follows, base ==== struct per_cpu_pages { spinlock_t lock; /* 0 4 */ int count; /* 4 4 */ int high; /* 8 4 */ int batch; /* 12 4 */ short int free_factor; /* 16 2 */ short int expire; /* 18 2 */ /* XXX 4 bytes hole, try to pack */ struct list_head lists[13]; /* 24 208 */ /* size: 256, cachelines: 4, members: 7 */ /* sum members: 228, holes: 1, sum holes: 4 */ /* padding: 24 */ } __attribute__((__aligned__(64))); patched ======= struct per_cpu_pages { spinlock_t lock; /* 0 4 */ int count; /* 4 4 */ int high; /* 8 4 */ int high_min; /* 12 4 */ int high_max; /* 16 4 */ int batch; /* 20 4 */ u8 flags; /* 24 1 */ u8 alloc_factor; /* 25 1 */ u8 expire; /* 26 1 */ /* XXX 1 byte hole, try to pack */ short int free_count; /* 28 2 */ /* XXX 2 bytes hole, try to pack */ struct list_head lists[13]; /* 32 208 */ /* size: 256, cachelines: 4, members: 11 */ /* sum members: 237, holes: 2, sum holes: 3 */ /* padding: 16 */ } __attribute__((__aligned__(64))); The size of the struct doesn't changed with the patchset. Huang Ying (9): mm, pcp: avoid to drain PCP when process exit cacheinfo: calculate size of per-CPU data cache slice mm, pcp: reduce lock contention for draining high-order pages mm: restrict the pcp batch scale factor to avoid too long latency mm, page_alloc: scale the number of pages that are batch allocated mm: add framework for PCP high auto-tuning mm: tune PCP high automatically mm, pcp: decrease PCP high if free pages < high watermark mm, pcp: reduce detecting time of consecutive high order page freeing drivers/base/cacheinfo.c | 51 ++++++- include/linux/cacheinfo.h | 1 + include/linux/gfp.h | 2 + include/linux/mmzone.h | 27 +++- mm/Kconfig | 11 ++ mm/page_alloc.c | 310 +++++++++++++++++++++++++++++++------- mm/vmstat.c | 8 +- 7 files changed, 345 insertions(+), 65 deletions(-) -- 2.25.1

1 9

[PACH OLK-5.10 00/11] KVM: arm64: Add host/guest KVM-PTP support
by Dongxu Sun 29 Nov '23

29 Nov '23

Jianyong Wu (4): ptp: Reorganize ptp_kvm.c to make it arch-independent clocksource: Add clocksource id for arm arch counter KVM: arm64: Add support for the KVM PTP service ptp: arm/arm64: Enable ptp_kvm for arm/arm64 Jon Hunter (1): ptp: Don't print an error if ptp_kvm is not supported Kele Huang (1): ptp: fix error print of ptp_kvm on X86_64 platform Thomas Gleixner (1): time: Add mechanism to recognize clocksource in time_get_snapshot Will Deacon (2): arm/arm64: Probe for the presence of KVM hypervisor KVM: arm64: Advertise KVM UID to guests via SMCCC Yanan Wang (1): KVM: arm64: fix compile error/warning Zenghui Yu (1): KVM: arm64: Fix Function ID typo for PTP_KVM service Documentation/virt/kvm/api.rst | 9 ++ Documentation/virt/kvm/arm/index.rst | 1 + Documentation/virt/kvm/arm/ptp_kvm.rst | 25 ++++++ arch/arm/include/asm/hypervisor.h | 3 + arch/arm64/include/asm/hypervisor.h | 3 + arch/arm64/include/asm/kvm_para.h | 2 +- arch/arm64/include/uapi/asm/Kbuild | 2 +- arch/arm64/include/uapi/asm/kvm_para.h | 7 ++ arch/arm64/kvm/arm.c | 1 + arch/arm64/kvm/hypercalls.c | 94 ++++++++++++++++---- drivers/clocksource/arm_arch_timer.c | 36 ++++++++ drivers/firmware/psci/psci.c | 2 + drivers/firmware/smccc/Makefile | 2 +- drivers/firmware/smccc/kvm_guest.c | 50 +++++++++++ drivers/firmware/smccc/smccc.c | 1 + drivers/ptp/Kconfig | 2 +- drivers/ptp/Makefile | 2 + drivers/ptp/ptp_kvm_arm.c | 28 ++++++ drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 85 +++++------------- drivers/ptp/ptp_kvm_x86.c | 97 +++++++++++++++++++++ include/linux/arm-smccc.h | 41 +++++++++ include/linux/clocksource.h | 6 ++ include/linux/clocksource_ids.h | 12 +++ include/linux/ptp_kvm.h | 19 ++++ include/linux/timekeeping.h | 12 +-- include/uapi/linux/kvm.h | 1 + kernel/time/clocksource.c | 2 + kernel/time/timekeeping.c | 1 + 28 files changed, 459 insertions(+), 87 deletions(-) create mode 100644 Documentation/virt/kvm/arm/ptp_kvm.rst create mode 100644 arch/arm64/include/uapi/asm/kvm_para.h create mode 100644 drivers/firmware/smccc/kvm_guest.c create mode 100644 drivers/ptp/ptp_kvm_arm.c rename drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} (60%) create mode 100644 drivers/ptp/ptp_kvm_x86.c create mode 100644 include/linux/clocksource_ids.h create mode 100644 include/linux/ptp_kvm.h -- 2.33.0

1 11

[PACH OLK-5.10 00/11] KVM: arm64: Add host/guest KVM-PTP support
by Dongxu Sun 29 Nov '23

29 Nov '23

Jianyong Wu (4): ptp: Reorganize ptp_kvm.c to make it arch-independent clocksource: Add clocksource id for arm arch counter KVM: arm64: Add support for the KVM PTP service ptp: arm/arm64: Enable ptp_kvm for arm/arm64 Jon Hunter (1): ptp: Don't print an error if ptp_kvm is not supported Kele Huang (1): ptp: fix error print of ptp_kvm on X86_64 platform Thomas Gleixner (1): time: Add mechanism to recognize clocksource in time_get_snapshot Will Deacon (2): arm/arm64: Probe for the presence of KVM hypervisor KVM: arm64: Advertise KVM UID to guests via SMCCC Yanan Wang (1): KVM: arm64: fix compile error/warning Zenghui Yu (1): KVM: arm64: Fix Function ID typo for PTP_KVM service Documentation/virt/kvm/api.rst | 9 ++ Documentation/virt/kvm/arm/index.rst | 1 + Documentation/virt/kvm/arm/ptp_kvm.rst | 25 ++++++ arch/arm/include/asm/hypervisor.h | 3 + arch/arm64/include/asm/hypervisor.h | 3 + arch/arm64/include/asm/kvm_para.h | 2 +- arch/arm64/include/uapi/asm/Kbuild | 2 +- arch/arm64/include/uapi/asm/kvm_para.h | 7 ++ arch/arm64/kvm/arm.c | 1 + arch/arm64/kvm/hypercalls.c | 94 ++++++++++++++++---- drivers/clocksource/arm_arch_timer.c | 36 ++++++++ drivers/firmware/psci/psci.c | 2 + drivers/firmware/smccc/Makefile | 2 +- drivers/firmware/smccc/kvm_guest.c | 50 +++++++++++ drivers/firmware/smccc/smccc.c | 1 + drivers/ptp/Kconfig | 2 +- drivers/ptp/Makefile | 2 + drivers/ptp/ptp_kvm_arm.c | 28 ++++++ drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 85 +++++------------- drivers/ptp/ptp_kvm_x86.c | 97 +++++++++++++++++++++ include/linux/arm-smccc.h | 41 +++++++++ include/linux/clocksource.h | 6 ++ include/linux/clocksource_ids.h | 12 +++ include/linux/ptp_kvm.h | 19 ++++ include/linux/timekeeping.h | 12 +-- include/uapi/linux/kvm.h | 1 + kernel/time/clocksource.c | 2 + kernel/time/timekeeping.c | 1 + 28 files changed, 459 insertions(+), 87 deletions(-) create mode 100644 Documentation/virt/kvm/arm/ptp_kvm.rst create mode 100644 arch/arm64/include/uapi/asm/kvm_para.h create mode 100644 drivers/firmware/smccc/kvm_guest.c create mode 100644 drivers/ptp/ptp_kvm_arm.c rename drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} (60%) create mode 100644 drivers/ptp/ptp_kvm_x86.c create mode 100644 include/linux/clocksource_ids.h create mode 100644 include/linux/ptp_kvm.h -- 2.33.0

1 4

[PATCH OLK-5.10] drivers: perf: Add feature flag check in armpmu_add/del
by Junhao He 29 Nov '23

29 Nov '23

driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA -------------------------------- Function armpmu_add will call armv8pmu_branch_reset() to reset BRBE. The BRBE feature depend on ARMV8 PMU hardware support for branch stack sampling. On older platforms the kernel panics. Internal error: Oops - Undefined instruction: 0000000002000000 [#1] SMP Call trace: armv8pmu_branch_reset+0xc/0x20 event_sched_in+0xc8/0x1a0 merge_sched_in+0x16c/0x41c Fixes: 2690e65ac9f9 ("drivers: perf: arm_pmuv3: Enable branch stack sampling via FEAT_BRBE") Signed-off-by: Junhao He <hejunhao3(a)huawei.com> --- drivers/perf/arm_pmu.c | 34 +++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-) diff --git a/drivers/perf/arm_pmu.c b/drivers/perf/arm_pmu.c index d02a85c0bedc..4ef8aee84eea 100644 --- a/drivers/perf/arm_pmu.c +++ b/drivers/perf/arm_pmu.c @@ -313,10 +313,12 @@ armpmu_del(struct perf_event *event, int flags) struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; - WARN_ON_ONCE(!hw_events->brbe_users); - hw_events->brbe_users--; - if (!hw_events->brbe_users) - hw_events->brbe_context = NULL; + if (has_branch_stack(event)) { + WARN_ON_ONCE(!hw_events->brbe_users); + hw_events->brbe_users--; + if (!hw_events->brbe_users) + hw_events->brbe_context = NULL; + } armpmu_stop(event, PERF_EF_UPDATE); hw_events->events[idx] = NULL; @@ -334,18 +336,20 @@ armpmu_add(struct perf_event *event, int flags) struct hw_perf_event *hwc = &event->hw; int idx; - /* - * Reset branch records buffer if a new task event gets - * scheduled on a PMU which might have existing records. - * Otherwise older branch records present in the buffer - * might leak into the new task event. - */ - if (event->ctx->task && hw_events->brbe_context != event->ctx) { - hw_events->brbe_context = event->ctx; - if (armpmu->branch_reset) - armpmu->branch_reset(); + if (has_branch_stack(event)) { + /* + * Reset branch records buffer if a new task event gets + * scheduled on a PMU which might have existing records. + * Otherwise older branch records present in the buffer + * might leak into the new task event. + */ + if (event->ctx->task && hw_events->brbe_context != event->ctx) { + hw_events->brbe_context = event->ctx; + if (armpmu->branch_reset) + armpmu->branch_reset(); + } + hw_events->brbe_users++; } - hw_events->brbe_users++; /* An event following a process won't be stopped earlier */ if (!cpumask_test_cpu(smp_processor_id(), &armpmu->supported_cpus)) -- 2.33.0

2 1

[PATCH OLK-6.6 v2 0/6] Handle more faults under the VMA lock
by Tong Tiangen 29 Nov '23

29 Nov '23

At this point, we're handling the majority of file-backed page faults under the VMA lock, using the ->map_pages entry point. This patch set attempts to expand that for the following siutations: - We have to do a read. This could be because we've hit the point in the readahead window where we need to kick off the next readahead, or because the page is simply not present in cache. - We're handling a write fault. Most applications don't do I/O by writes to shared mmaps for very good reasons, but some do, and it'd be nice to not make that slow unnecessarily. - We're doing a COW of a private mapping (both PTE already present and PTE not-present). These are two different codepaths and I handle both of them in this patch set. There is no support in this patch set for drivers to mark themselves as being VMA lock friendly; they could implement the ->map_pages vm_operation, but if they do, they would be the first. This is probably something we want to change at some point in the future, and I've marked where to make that change in the code. There is very little performance change in the benchmarks we've run; mostly because the vast majority of page faults are handled through the other paths. I still think this patch series is useful for workloads that may take these paths more often, and just for cleaning up the fault path in general (it's now clearer why we have to retry in these cases). Matthew Wilcox (Oracle) (6): mm: make lock_folio_maybe_drop_mmap() VMA lock aware mm: call wp_page_copy() under the VMA lock mm: handle shared faults under the VMA lock mm: handle COW faults under the VMA lock mm: handle read faults under the VMA lock mm: handle write faults to RO pages under the VMA lock mm/filemap.c | 13 ++++---- mm/memory.c | 93 ++++++++++++++++++++++++++++++++-------------------- 2 files changed, 65 insertions(+), 41 deletions(-) -- 2.25.1

2 7

[PATCH OLK-6.6] tcp/dccp: Add another way to allocate local ports in connect()
by Zhengchao Shao 29 Nov '23

29 Nov '23

From: Lu Wei <luwei32(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8KBYH -------------------------------- Commit 07f4c90062f8 ("tcp/dccp: try to not exhaust ip_local_port_range in connect()") allocates even ports for connect() first while leaving odd ports for bind() and this works well in busy servers. But this strategy causes severe performance degradation in busy clients. when a client has used more than half of the local ports setted in proc/sys/net/ipv4/ip_local_port_range, if this client trys to connect to a server again, the connect time increases rapidly since it will traverse all the even ports though they are exhausted. So this path provides another strategy by introducing a system option: local_port_allocation. If it is a busy client, users should set it to 1 to use sequential allocation while it should be set to 0 in other situations. Its default value is 0. Signed-off-by: Lu Wei <luwei32(a)huawei.com> Signed-off-by: Liu Jian <liujian56(a)huawei.com> Conflicts: include/net/tcp.h net/ipv4/inet_hashtables.c net/ipv4/sysctl_net_ipv4.c Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- include/net/tcp.h | 1 + net/ipv4/inet_hashtables.c | 11 ++++++++--- net/ipv4/sysctl_net_ipv4.c | 8 ++++++++ 3 files changed, 17 insertions(+), 3 deletions(-) diff --git a/include/net/tcp.h b/include/net/tcp.h index 0239e815edf7..e9d387fffe22 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -258,6 +258,7 @@ DECLARE_PER_CPU(int, tcp_memory_per_cpu_fw_alloc); extern struct percpu_counter tcp_sockets_allocated; extern unsigned long tcp_memory_pressure; +extern int sysctl_local_port_allocation; /* optimized version of sk_under_memory_pressure() for TCP sockets */ static inline bool tcp_under_memory_pressure(const struct sock *sk) diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index 598c1b114d2c..919f0f869118 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -1011,7 +1011,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, struct inet_bind_bucket *tb; bool tb_created = false; u32 remaining, offset; - int ret, i, low, high; + int ret, i, low, high, span_size; int l3mdev; u32 index; @@ -1021,6 +1021,11 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, local_bh_enable(); return ret; } + /* local_port_allocation 0 means even and odd port allocation strategy + * will be applied, so span size is 2; otherwise sequential allocation + * will be used and span size is 1. Default value is 0. + */ + span_size = sysctl_local_port_allocation ? 1 : 2; l3mdev = inet_sk_bound_l3mdev(sk); @@ -1043,7 +1048,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, offset &= ~1U; other_parity_scan: port = low + offset; - for (i = 0; i < remaining; i += 2, port += 2) { + for (i = 0; i < remaining; i += span_size, port += span_size) { if (unlikely(port >= high)) port -= remaining; if (inet_is_local_reserved_port(net, port)) @@ -1084,7 +1089,7 @@ int __inet_hash_connect(struct inet_timewait_death_row *death_row, } offset++; - if ((offset & 1) && remaining > 1) + if ((offset & 1) && remaining > 1 && span_size == 2) goto other_parity_scan; return -EADDRNOTAVAIL; diff --git a/net/ipv4/sysctl_net_ipv4.c b/net/ipv4/sysctl_net_ipv4.c index 6ac890b4073f..b17eb28a9690 100644 --- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -39,6 +39,7 @@ static unsigned long ip_ping_group_range_min[] = { 0, 0 }; static unsigned long ip_ping_group_range_max[] = { GID_T_MAX, GID_T_MAX }; static u32 u32_max_div_HZ = UINT_MAX / HZ; static int one_day_secs = 24 * 3600; +int sysctl_local_port_allocation; static u32 fib_multipath_hash_fields_all_mask __maybe_unused = FIB_MULTIPATH_HASH_FIELD_ALL_MASK; static unsigned int tcp_child_ehash_entries_max = 16 * 1024 * 1024; @@ -579,6 +580,13 @@ static struct ctl_table ipv4_table[] = { .extra1 = &sysctl_fib_sync_mem_min, .extra2 = &sysctl_fib_sync_mem_max, }, + { + .procname = "local_port_allocation", + .data = &sysctl_local_port_allocation, + .maxlen = sizeof(int), + .mode = 0644, + .proc_handler = proc_dointvec, + }, { } }; -- 2.34.1

2 1

[PACH OLK-5.10 v5 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 29 Nov '23

29 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

1 20

[PATCH OLK-5.10] livepatch/powerpc: Fix issue that miss one layer on stack checking
by Zheng Yejian 29 Nov '23

29 Nov '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7BMC9 CVE: NA -------------------------------- Suppose task 'T' is running in function 'B', and user is doing livepatch for function 'A', and function 'A' is calling 'B'. Then task 'T' will be interrupted by stop_machine, and suppose that 'B' has not saved the link register (which point to address in 'A') into stack memory, and data in link register position may be invalid, then 'A' would be missed on stack checking. To find a solution, we list following cases (suppose calling chain: P -> A -> B, A runs `bl B`, 'nip' means instruction pointer found in interrupt frame, 'lr' means link register found in interrupt frame, 'frame->pc' means link register saved in first stack frame): 1. 'nip' is in 'A', `bl B` is not executed, then: 'lr' is in 'P', 'frame->pc' should be ignored; 2. 'nip' is in some ppc64_stub or ppc32_plt which also not save link register, then: 'lr' is in 'A', 'frame->pc' should be ignored; 3. 'nip' is in 'B', but 'B' has not saved link register, then: 'lr' is in 'A', 'frame->pc' should be ignored; 4. 'nip' is in 'B', 'B' has saved link register, then: 'lr' is in 'A', 'frame->pc' is also in 'A'; 5. 'nip' is in 'A', 'B' has returned but its stack pointer is not moved, then 'lr' is in 'A', 'frame->pc' is also in 'A'; 6. 'nip' is in 'A', 'B' has returned and its stack pointer is moved, then 'lr' is in 'A', 'frame->pc' is in 'P'. As a conclusion, we need to: 1. check 'nip' or 'lr' or both if they are not in same function; 2. ignore 'frame->pc' if 'nip' and 'lr' are not in same function. Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- arch/powerpc/include/asm/livepatch.h | 11 ++++++++++ arch/powerpc/kernel/livepatch.c | 28 +++++++++++++++++++++++-- arch/powerpc/kernel/livepatch_32.c | 31 +++++++++++++++++++--------- arch/powerpc/kernel/livepatch_64.c | 31 +++++++++++++++++++--------- 4 files changed, 79 insertions(+), 22 deletions(-) diff --git a/arch/powerpc/include/asm/livepatch.h b/arch/powerpc/include/asm/livepatch.h index ae674ea59ab3..285602e637f1 100644 --- a/arch/powerpc/include/asm/livepatch.h +++ b/arch/powerpc/include/asm/livepatch.h @@ -121,9 +121,20 @@ struct arch_klp_data { #define KLP_MAX_REPLACE_SIZE sizeof_field(struct arch_klp_data, old_insns) struct stackframe { + /* stack frame to be unwinded */ unsigned long sp; + /* link register saved in last stack frame */ unsigned long pc; + /* instruction register saved in pt_regs */ unsigned long nip; + /* link register saved in pt_regs */ + unsigned long link; + /* stack frame pointer (r1 register) saved in pt_regs */ + unsigned long sfp; + /* check if nip and link are in same function */ + unsigned int nip_link_in_same_func; + /* check if it is top frame before interrupt */ + unsigned int is_top_frame; }; #ifdef PPC64_ELF_ABI_v1 diff --git a/arch/powerpc/kernel/livepatch.c b/arch/powerpc/kernel/livepatch.c index d568e8c8b16b..5ba38c2c7c5c 100644 --- a/arch/powerpc/kernel/livepatch.c +++ b/arch/powerpc/kernel/livepatch.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/ftrace.h> #include <linux/livepatch.h> +#include <linux/kallsyms.h> #include <asm/probes.h> #include <asm/livepatch.h> #include <asm/code-patching.h> @@ -67,6 +68,22 @@ int klp_brk_handler(struct pt_regs *regs) return 1; } +static int check_addr_in_same_func(unsigned long addr1, unsigned long addr2) +{ + unsigned long size = 0; + unsigned long offset = 0; + unsigned long start; + + if (addr1 == 0 || addr2 == 0) + return 0; + if (addr1 == addr2) + return 1; + if (!kallsyms_lookup_size_offset(addr1, &size, &offset)) + return 0; + start = addr1 - offset; + return (addr2 >= start) && (addr2 - start < size); +} + int klp_unwind_frame(struct task_struct *tsk, struct stackframe *frame) { unsigned long *stack; @@ -79,7 +96,10 @@ int klp_unwind_frame(struct task_struct *tsk, struct stackframe *frame) if (frame->nip != 0) frame->nip = 0; + if (frame->link != 0) + frame->link = 0; + frame->is_top_frame = (frame->sfp == frame->sp); stack = (unsigned long *)frame->sp; /* @@ -94,10 +114,14 @@ int klp_unwind_frame(struct task_struct *tsk, struct stackframe *frame) struct pt_regs *regs = (struct pt_regs *) (frame->sp + STACK_FRAME_OVERHEAD); frame->nip = regs->nip; - pr_debug("--- interrupt: task = %d/%s, trap %lx at NIP=x%lx/%pS, LR=0x%lx/%pS\n", + frame->link = regs->link; + frame->sfp = regs->gpr[PT_R1]; + frame->nip_link_in_same_func = check_addr_in_same_func(frame->nip, frame->link); + pr_debug("--- interrupt: task = %d/%s, trap %lx at NIP=0x%lx/%pS, LR=0x%lx/%pS, SFP=0x%lx, nip_link_in_same_func=%u\n", tsk->pid, tsk->comm, regs->trap, regs->nip, (void *)regs->nip, - regs->link, (void *)regs->link); + regs->link, (void *)regs->link, + frame->sfp, frame->nip_link_in_same_func); } frame->sp = stack[0]; diff --git a/arch/powerpc/kernel/livepatch_32.c b/arch/powerpc/kernel/livepatch_32.c index 3fe4f3c5790b..134b08e12e74 100644 --- a/arch/powerpc/kernel/livepatch_32.c +++ b/arch/powerpc/kernel/livepatch_32.c @@ -272,13 +272,21 @@ static int klp_check_jump_func(struct stackframe *frame, void *data) struct walk_stackframe_args *args = data; struct klp_func_list *check_funcs = args->check_funcs; - /* check the PC first */ - if (!check_func_list(check_funcs, &args->ret, frame->pc)) - return args->ret; - /* check NIP when the exception stack switching */ if (frame->nip && !check_func_list(check_funcs, &args->ret, frame->nip)) return args->ret; + if (frame->link && !frame->nip_link_in_same_func && + !check_func_list(check_funcs, &args->ret, frame->link)) + return args->ret; + /* + * There are two cases that frame->pc is reliable: + * 1. frame->pc is not in top frame before interrupt; + * 2. nip and link are in same function; + */ + if (!frame->is_top_frame || frame->nip_link_in_same_func) { + if (!check_func_list(check_funcs, &args->ret, frame->pc)) + return args->ret; + } return 0; } @@ -298,10 +306,11 @@ static int do_check_calltrace(struct walk_stackframe_args *args, int (*fn)(struct stackframe *, void *)) { struct task_struct *g, *t; - struct stackframe frame; unsigned long *stack; for_each_process_thread(g, t) { + struct stackframe frame = { 0 }; + if (t == current) { /* * Handle the current carefully on each CPUs, we shouldn't @@ -329,7 +338,6 @@ static int do_check_calltrace(struct walk_stackframe_args *args, frame.sp = (unsigned long)stack; frame.pc = stack[STACK_FRAME_LR_SAVE]; - frame.nip = 0; klp_walk_stackframe(&frame, fn, t, args); if (args->ret) { pr_info("PID: %d Comm: %.20s\n", t->pid, t->comm); @@ -368,13 +376,16 @@ static int check_module_calltrace(struct stackframe *frame, void *data) { struct walk_stackframe_args *args = data; - /* check the PC first */ - if (within_module_core(frame->pc, args->mod)) - goto err_out; - /* check NIP when the exception stack switching */ if (frame->nip && within_module_core(frame->nip, args->mod)) goto err_out; + if (frame->link && !frame->nip_link_in_same_func && + within_module_core(frame->link, args->mod)) + goto err_out; + if (!frame->is_top_frame || frame->nip_link_in_same_func) { + if (within_module_core(frame->pc, args->mod)) + goto err_out; + } return 0; diff --git a/arch/powerpc/kernel/livepatch_64.c b/arch/powerpc/kernel/livepatch_64.c index a2ec7c8c1bad..b33839b5916a 100644 --- a/arch/powerpc/kernel/livepatch_64.c +++ b/arch/powerpc/kernel/livepatch_64.c @@ -273,13 +273,21 @@ static int klp_check_jump_func(struct stackframe *frame, void *data) struct walk_stackframe_args *args = data; struct klp_func_list *check_funcs = args->check_funcs; - /* check the PC first */ - if (!check_func_list(check_funcs, &args->ret, frame->pc)) - return args->ret; - /* check NIP when the exception stack switching */ if (frame->nip && !check_func_list(check_funcs, &args->ret, frame->nip)) return args->ret; + if (frame->link && !frame->nip_link_in_same_func && + !check_func_list(check_funcs, &args->ret, frame->link)) + return args->ret; + /* + * There are two cases that frame->pc is reliable: + * 1. frame->pc is not in top frame before interrupt; + * 2. nip and link are in same function; + */ + if (!frame->is_top_frame || frame->nip_link_in_same_func) { + if (!check_func_list(check_funcs, &args->ret, frame->pc)) + return args->ret; + } return 0; } @@ -299,10 +307,11 @@ static int do_check_calltrace(struct walk_stackframe_args *args, int (*fn)(struct stackframe *, void *)) { struct task_struct *g, *t; - struct stackframe frame; unsigned long *stack; for_each_process_thread(g, t) { + struct stackframe frame = { 0 }; + if (t == current) { /* * Handle the current carefully on each CPUs, @@ -332,7 +341,6 @@ static int do_check_calltrace(struct walk_stackframe_args *args, frame.sp = (unsigned long)stack; frame.pc = stack[STACK_FRAME_LR_SAVE]; - frame.nip = 0; klp_walk_stackframe(&frame, fn, t, args); if (args->ret) { pr_debug("%s FAILED when %s\n", __func__, @@ -373,13 +381,16 @@ static int check_module_calltrace(struct stackframe *frame, void *data) { struct walk_stackframe_args *args = data; - /* check the PC first */ - if (within_module_core(frame->pc, args->mod)) - goto err_out; - /* check NIP when the exception stack switching */ if (frame->nip && within_module_core(frame->nip, args->mod)) goto err_out; + if (frame->link && !frame->nip_link_in_same_func && + within_module_core(frame->link, args->mod)) + goto err_out; + if (!frame->is_top_frame || frame->nip_link_in_same_func) { + if (within_module_core(frame->pc, args->mod)) + goto err_out; + } return 0; -- 2.25.1

2 1

[PACH OLK-5.10 v5 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 29 Nov '23

29 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

1 20

[PATCH v2 OLK-5.10 0/3] support page eject
by Wupeng Ma 29 Nov '23

29 Nov '23

From: Ma Wupeng <mawupeng1(a)huawei.com> Page ejection is achieved by soft_offline_page and unpoison_memory. A linked list is maintained to log the pfns which are offlined by this module. Only the pfns present in the list is allowed to go online. The follow sysfs is introduced to online/offline page via this module, since there is a internal linked list to record all offlined pages, remove_page is introduce to remove this page from list. - /sys/kernel/page_eject/online_page - /sys/kernel/page_eject/offline_page - /sys/kernel/page_eject/remove_page Changelog since v1: - remove mce related patches temporarily. Ma Wupeng (3): mm/hwpoison: Export symbol soft_offline_page mm: page_eject: Introuduce page ejection config: update defconfig for PAGE_EJECT arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/ras/Kconfig | 10 + drivers/ras/Makefile | 1 + drivers/ras/page_eject.c | 248 +++++++++++++++++++++++++ mm/memory-failure.c | 1 + 6 files changed, 262 insertions(+) create mode 100644 drivers/ras/page_eject.c -- 2.25.1

2 4

[PATCH v2 OLK-5.10 0/3] support page eject
by Wupeng Ma 29 Nov '23

29 Nov '23

From: Ma Wupeng <mawupeng1(a)huawei.com> Page ejection is achieved by soft_offline_page and unpoison_memory. A linked list is maintained to log the pfns which are offlined by this module. Only the pfns present in the list is allowed to go online. The follow sysfs is introduced to online/offline page via this module, since there is a internal linked list to record all offlined pages, remove_page is introduce to remove this page from list. - /sys/kernel/page_eject/online_page - /sys/kernel/page_eject/offline_page - /sys/kernel/page_eject/remove_page Besides pag eject, machine check safe is enhanced as follow: During soft offline page, page is copied to new page in kernel. If the origin page has UCE, there will lead to kernel panic. In order to solve this problem, use machine check safe to catch this error which can be achieved by using copy_mc_to_kernel to replace copy_page. Signal SIGBUS will be send to user task if this UCE is consumed by this situation to avoid kernel panic. Ma Wupeng (3): mm/hwpoison: Export symbol soft_offline_page mm: page_eject: Introuduce page ejection config: update defconfig for PAGE_EJECT arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/ras/Kconfig | 10 + drivers/ras/Makefile | 1 + drivers/ras/page_eject.c | 248 +++++++++++++++++++++++++ mm/memory-failure.c | 1 + 6 files changed, 262 insertions(+) create mode 100644 drivers/ras/page_eject.c -- 2.25.1

2 4

[PATCH OLK-5.10] driver/perf: Not enabled ARM64_BRBE by default
by Junhao He 29 Nov '23

29 Nov '23

driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8EC9K CVE: NA -------------------------------- The BRBE feature depend on ARMV8 PMU hardware support for branch stack sampling. Not enabled ARM64_BRBE by default. Signed-off-by: Junhao He <hejunhao3(a)huawei.com> --- drivers/perf/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig index 25a577530da4..67ad53cde11f 100644 --- a/drivers/perf/Kconfig +++ b/drivers/perf/Kconfig @@ -133,7 +133,6 @@ config ARM_SPE_PMU config ARM64_BRBE bool "Enable support for Branch Record Buffer Extension (BRBE)" depends on PERF_EVENTS && ARM64 && ARM_PMU - default y help Enable perf support for Branch Record Buffer Extension (BRBE) which records all branches taken in an execution path. This supports some -- 2.33.0

2 1

[PACH OLK-5.10 v5 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 29 Nov '23

29 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

1 20

[PATCH OLK-6.6 v2 00/31] Backport ARM64-ILP32 patches
by Jinjie Ruan 29 Nov '23

29 Nov '23

Backport ILP32 for ARM64 patches to OLK6.6 form openEuler-23.09. Andrew Pinski (3): arm64: rename COMPAT to AARCH32_EL0 arm64: uapi: set __BITS_PER_LONG correctly for ILP32 and LP64 arm64:ilp32: add ARM64_ILP32 to Kconfig Chen Jiahao (4): arm64: fix AUDIT_ARCH_AARCH64ILP32 bug on audit subsystem arm64: fix address limit problem with TASK_SIZE_MAX arm64: set 32-bit compatible TASK_SIZE_MAX to fix U32 libc_write_01 error arm64: fix image size inflation with CONFIG_COMPAT_TASK_SIZE Dave Martin (1): arm64: signal: Make parse_user_sigframe() independent of rt_sigframe layout James Morse (1): ptrace: Add compat PTRACE_{G,S}ETSIGMASK handlers Philipp Tomsich (1): arm64:ilp32: add vdso-ilp32 and use for signal return Xiongfeng Wang (6): arm64: rename functions that reference compat term arm64: secomp: fix the secure computing mode 1 syscall check for ilp32 ilp32: avoid clearing upper 32 bits of syscall return value for ilp32 ilp32: skip ARM erratum 1418040 for ilp32 application arm64: fix abi change caused by ILP32 ilp32: fix compile problem when ARM64_ILP32 and UBSAN are both enabled Yury Norov (14): thread: move thread bits accessors to separated file arm64: ilp32: add documentation on the ILP32 ABI for ARM64 arm64: introduce is_a32_compat_{task,thread} for AArch32 compat arm64: ilp32: add is_ilp32_compat_{task,thread} and TIF_32BIT_AARCH64 arm64: introduce AUDIT_ARCH_AARCH64ILP32 for ilp32 arm64: introduce binfmt_elf32.c arm64: change compat_elf_hwcap and compat_elf_hwcap2 prefix to a32 arm64: ilp32: introduce binfmt_ilp32.c arm64: ilp32: share aarch32 syscall handlers arm64: ilp32: introduce syscall table for ILP32 arm64: signal: share lp64 signal structures and routines to ilp32 arm64: signal32: move ilp32 and aarch32 common code to separated file arm64: ilp32: introduce ilp32-specific sigframe and ucontext arm64: ptrace: handle ptrace_request differently for aarch32 and ilp32 Zhen Lei (1): arm64: replace is_compat_task() with is_ilp32_compat_task() in TASK_SIZE_MAX Documentation/arm64/ilp32.txt | 52 +++ arch/arm64/Kconfig | 26 +- arch/arm64/Makefile | 3 + arch/arm64/include/asm/arch_timer.h | 4 +- arch/arm64/include/asm/compat.h | 18 +- arch/arm64/include/asm/elf.h | 32 +- arch/arm64/include/asm/fpsimd.h | 2 +- arch/arm64/include/asm/ftrace.h | 2 +- arch/arm64/include/asm/hwcap.h | 8 +- arch/arm64/include/asm/is_compat.h | 83 ++++ arch/arm64/include/asm/processor.h | 24 +- arch/arm64/include/asm/ptrace.h | 16 +- arch/arm64/include/asm/seccomp.h | 32 +- arch/arm64/include/asm/signal32.h | 31 +- arch/arm64/include/asm/signal32_common.h | 13 + arch/arm64/include/asm/signal_common.h | 391 +++++++++++++++++ arch/arm64/include/asm/signal_ilp32.h | 23 + arch/arm64/include/asm/syscall.h | 14 +- arch/arm64/include/asm/thread_info.h | 4 +- arch/arm64/include/asm/unistd.h | 5 + arch/arm64/include/asm/vdso.h | 9 + arch/arm64/include/uapi/asm/bitsperlong.h | 9 +- arch/arm64/include/uapi/asm/unistd.h | 15 +- arch/arm64/kernel/Makefile | 8 +- arch/arm64/kernel/armv8_deprecated.c | 14 +- arch/arm64/kernel/asm-offsets.c | 13 +- arch/arm64/kernel/binfmt_elf32.c | 27 ++ arch/arm64/kernel/binfmt_ilp32.c | 89 ++++ arch/arm64/kernel/compat_alignment.c | 2 +- arch/arm64/kernel/cpufeature.c | 36 +- arch/arm64/kernel/cpuinfo.c | 18 +- arch/arm64/kernel/debug-monitors.c | 4 +- arch/arm64/kernel/entry-common.c | 6 +- arch/arm64/kernel/hw_breakpoint.c | 8 +- arch/arm64/kernel/perf_callchain.c | 28 +- arch/arm64/kernel/perf_regs.c | 4 +- arch/arm64/kernel/process.c | 15 +- arch/arm64/kernel/proton-pack.c | 2 +- arch/arm64/kernel/ptrace.c | 38 +- arch/arm64/kernel/signal.c | 397 +++--------------- arch/arm64/kernel/signal32.c | 97 ++--- arch/arm64/kernel/signal32_common.c | 37 ++ arch/arm64/kernel/signal_ilp32.c | 67 +++ arch/arm64/kernel/sys32.c | 104 +---- arch/arm64/kernel/sys32_common.c | 106 +++++ arch/arm64/kernel/sys_compat.c | 12 +- arch/arm64/kernel/sys_ilp32.c | 82 ++++ arch/arm64/kernel/syscall.c | 37 +- arch/arm64/kernel/traps.c | 5 +- arch/arm64/kernel/vdso-ilp32/.gitignore | 2 + arch/arm64/kernel/vdso-ilp32/Makefile | 111 +++++ arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S | 22 + arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S | 88 ++++ arch/arm64/kernel/vdso.c | 46 +- arch/arm64/mm/fault.c | 2 +- include/linux/sched.h | 1 + include/linux/thread_bits.h | 87 ++++ include/linux/thread_info.h | 73 +--- kernel/ptrace.c | 52 ++- 59 files changed, 1790 insertions(+), 766 deletions(-) create mode 100644 Documentation/arm64/ilp32.txt create mode 100644 arch/arm64/include/asm/is_compat.h create mode 100644 arch/arm64/include/asm/signal32_common.h create mode 100644 arch/arm64/include/asm/signal_common.h create mode 100644 arch/arm64/include/asm/signal_ilp32.h create mode 100644 arch/arm64/kernel/binfmt_elf32.c create mode 100644 arch/arm64/kernel/binfmt_ilp32.c create mode 100644 arch/arm64/kernel/signal32_common.c create mode 100644 arch/arm64/kernel/signal_ilp32.c create mode 100644 arch/arm64/kernel/sys32_common.c create mode 100644 arch/arm64/kernel/sys_ilp32.c create mode 100644 arch/arm64/kernel/vdso-ilp32/.gitignore create mode 100644 arch/arm64/kernel/vdso-ilp32/Makefile create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.S create mode 100644 arch/arm64/kernel/vdso-ilp32/vdso-ilp32.lds.S create mode 100644 include/linux/thread_bits.h -- 2.34.1

1 31

[openEuler-20.03-LTS-SP4 PATCH] arm64: cpufeature: Extract capped perfmon fields
by Kunkun Jiang 29 Nov '23

29 Nov '23

From: zhangyuan <zhangyuan162(a)huawei.com> KVM: arm64: limit PMU version to PMUv3 for ARMv8.1 Backport patches from upstream to fix the issue of PMU. Signed-off-by: Yuan Zhang <zhangyuan162(a)huawei.com> --- kernel.spec | 5 +- ...eature-Extract-capped-perfmon-fields.patch | 80 +++++++++++++++++ ...mit-PMU-version-to-PMUv3-for-ARMv8.1.patch | 90 +++++++++++++++++++ series.conf | 2 + 4 files changed, 176 insertions(+), 1 deletion(-) create mode 100644 patches/0758-arm64-cpufeature-Extract-capped-perfmon-fields.patch create mode 100644 patches/0759-KVM-arm64-limit-PMU-version-to-PMUv3-for-ARMv8.1.patch diff --git a/kernel.spec b/kernel.spec index 0ddbd93..7a06c2c 100644 --- a/kernel.spec +++ b/kernel.spec @@ -32,7 +32,7 @@ Name: kernel Version: 4.19.90 -Release: %{hulkrelease}.0252 +Release: %{hulkrelease}.0253 Summary: Linux Kernel License: GPLv2 URL: http://www.kernel.org/ @@ -849,6 +849,9 @@ fi %endif %changelog +* Tue Nov 28 2023 Yuan Zhang <zhangyuan162(a)huawei.com> - 4.19.90-2311.5.0.0253 +- arm64: cpufeature: Extract capped perfmon fields +- KVM: arm64: limit PMU version to PMUv3 for ARMv8.1 * Tue Nov 28 2023 Li Xiaodong <lixiaodong67(a)huawei.com> - 4.19.90-2311.5.0.0252 - !3000 [openEuler-1.0-LTS] add Phytium drivers CONFIG diff --git a/patches/0758-arm64-cpufeature-Extract-capped-perfmon-fields.patch b/patches/0758-arm64-cpufeature-Extract-capped-perfmon-fields.patch new file mode 100644 index 0000000..de1db70 --- /dev/null +++ b/patches/0758-arm64-cpufeature-Extract-capped-perfmon-fields.patch @@ -0,0 +1,80 @@ +From a207eaeac98757a86cce704be6c4e097439503c5 Mon Sep 17 00:00:00 2001 +From: Andrew Murray <andrew.murray(a)arm.com> +Date: Tue, 28 Nov 2023 15:46:32 +0800 +Subject: [PATCH 1/2] arm64: cpufeature: Extract capped perfmon fields + +mainline inclusion +from mainline-v5.7-rc1 +commit 8e35aa642ee4dab01b16cc4b2df59d1936f3b3c2 +category: bugfix +bugzilla: https://gitee.com/openeuler/kernel/issues/I8K8XV +CVE: NA + +Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… + +----------------------------------- + +commit 8e35aa642ee4dab01b16cc4b2df59d1936f3b3c2 upstream. + +When emulating ID registers there is often a need to cap the version +bits of a feature such that the guest will not use features that the +host is not aware of. For example, when KVM mediates access to the PMU +by emulating register accesses. + +Let's add a helper that extracts a performance monitors ID field and +caps the version to a given value. + +Fields that identify the version of the Performance Monitors Extension +do not follow the standard ID scheme, and instead follow the scheme +described in ARM DDI 0487E.a page D13-2825 "Alternative ID scheme used +for the Performance Monitors Extension version". The value 0xF means an +IMPLEMENTATION DEFINED PMU is present, and values 0x0-OxE can be treated +the same as an unsigned field with 0x0 meaning no PMU is present. + +Signed-off-by: Andrew Murray <andrew.murray(a)arm.com> +Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> +[Mark: rework to handle perfmon fields] +Signed-off-by: Mark Rutland <mark.rutland(a)arm.com> +Signed-off-by: Will Deacon <will(a)kernel.org> +Signed-off-by: zhangyuan <zhangyuan162(a)huawei.com> +--- + arch/arm64/include/asm/cpufeature.h | 23 +++++++++++++++++++++++ + 1 file changed, 23 insertions(+) + +diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h +index eef5a9c9b823..e2ba573644d5 100644 +--- a/arch/arm64/include/asm/cpufeature.h ++++ b/arch/arm64/include/asm/cpufeature.h +@@ -449,6 +449,29 @@ cpuid_feature_extract_unsigned_field(u64 features, int field) + return cpuid_feature_extract_unsigned_field_width(features, field, 4); + } + ++/* ++ * Fields that identify the version of the Performance Monitors Extension do ++ * not follow the standard ID scheme. See ARM DDI 0487E.a page D13-2825, ++ * "Alternative ID scheme used for the Performance Monitors Extension version". ++ */ ++static inline u64 __attribute_const__ ++cpuid_feature_cap_perfmon_field(u64 features, int field, u64 cap) ++{ ++ u64 val = cpuid_feature_extract_unsigned_field(features, field); ++ u64 mask = GENMASK_ULL(field + 3, field); ++ ++ /* Treat IMPLEMENTATION DEFINED functionality as unimplemented */ ++ if (val == 0xf) ++ val = 0; ++ ++ if (val > cap) { ++ features &= ~mask; ++ features |= (cap << field) & mask; ++ } ++ ++ return features; ++} ++ + static inline u64 arm64_ftr_mask(const struct arm64_ftr_bits *ftrp) + { + return (u64)GENMASK(ftrp->shift + ftrp->width - 1, ftrp->shift); +-- +2.33.0 + diff --git a/patches/0759-KVM-arm64-limit-PMU-version-to-PMUv3-for-ARMv8.1.patch b/patches/0759-KVM-arm64-limit-PMU-version-to-PMUv3-for-ARMv8.1.patch new file mode 100644 index 0000000..1f72f92 --- /dev/null +++ b/patches/0759-KVM-arm64-limit-PMU-version-to-PMUv3-for-ARMv8.1.patch @@ -0,0 +1,90 @@ +From 6a416c5efa3ce99f5f0f7e9c603b42b0e047481c Mon Sep 17 00:00:00 2001 +From: Andrew Murray <andrew.murray(a)arm.com> +Date: Tue, 28 Nov 2023 15:46:33 +0800 +Subject: [PATCH 2/2] KVM: arm64: limit PMU version to PMUv3 for ARMv8.1 + +mainline inclusion +from mainline-v5.7-rc1 +commit c854188ea01062f5a5fd7f05658feb1863774eaa +category: bugfix +bugzilla: https://gitee.com/openeuler/kernel/issues/I8K8XV +CVE: NA + +Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… + +----------------------------------- + +commit c854188ea01062f5a5fd7f05658feb1863774eaa upstream. + +We currently expose the PMU version of the host to the guest via +emulation of the DFR0_EL1 and AA64DFR0_EL1 debug feature registers. +However many of the features offered beyond PMUv3 for 8.1 are not +supported in KVM. Examples of this include support for the PMMIR +registers (added in PMUv3 for ARMv8.4) and 64-bit event counters +added in (PMUv3 for ARMv8.5). + +Let's trap the Debug Feature Registers in order to limit +PMUVer/PerfMon in the Debug Feature Registers to PMUv3 for ARMv8.1 +to avoid unexpected behaviour. + +Both ID_AA64DFR0.PMUVer and ID_DFR0.PerfMon follow the "Alternative ID +scheme used for the Performance Monitors Extension version" where 0xF +means an IMPLEMENTATION DEFINED PMU is implemented, and values 0x0-0xE +are treated as with an unsigned field (with 0x0 meaning no PMU is +present). As we don't expect to expose an IMPLEMENTATION DEFINED PMU, +and our cap is below 0xF, we can treat these fields as unsigned when +applying the cap. + +Signed-off-by: Andrew Murray <andrew.murray(a)arm.com> +Reviewed-by: Suzuki K Poulose <suzuki.poulose(a)arm.com> +[Mark: make field names consistent, use perfmon cap] +Signed-off-by: Mark Rutland <mark.rutland(a)arm.com> +Signed-off-by: Will Deacon <will(a)kernel.org> +[zhangyuan162(a)huawei.com: adjust the context in read_id_reg()] +Signed-off-by: zhangyuan <zhangyuan162(a)huawei.com> +--- + arch/arm64/include/asm/sysreg.h | 6 ++++++ + arch/arm64/kvm/sys_regs.c | 10 ++++++++++ + 2 files changed, 16 insertions(+) + +diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h +index de4c31f073bb..041100c28cab 100644 +--- a/arch/arm64/include/asm/sysreg.h ++++ b/arch/arm64/include/asm/sysreg.h +@@ -637,6 +637,12 @@ + #define ID_AA64DFR0_TRACEVER_SHIFT 4 + #define ID_AA64DFR0_DEBUGVER_SHIFT 0 + ++#define ID_AA64DFR0_PMUVER_8_1 0x4 ++ ++#define ID_DFR0_PERFMON_SHIFT 24 ++ ++#define ID_DFR0_PERFMON_8_1 0x4 ++ + #define ID_AA64DFR0_PMSVER_8_2 0x1 + #define ID_AA64DFR0_PMSVER_8_3 0x2 + +diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c +index 25caa9ec95e4..cc824a208684 100644 +--- a/arch/arm64/kvm/sys_regs.c ++++ b/arch/arm64/kvm/sys_regs.c +@@ -1082,6 +1082,16 @@ static u64 read_id_reg(struct kvm_vcpu *vcpu, + kvm_debug("LORegions unsupported for guests, suppressing\n"); + + val &= ~(0xfUL << ID_AA64MMFR1_LOR_SHIFT); ++ } else if (id == SYS_ID_AA64DFR0_EL1) { ++ /* Limit guests to PMUv3 for ARMv8.1 */ ++ val = cpuid_feature_cap_perfmon_field(val, ++ ID_AA64DFR0_PMUVER_SHIFT, ++ ID_AA64DFR0_PMUVER_8_1); ++ } else if (id == SYS_ID_DFR0_EL1) { ++ /* Limit guests to PMUv3 for ARMv8.1 */ ++ val = cpuid_feature_cap_perfmon_field(val, ++ ID_DFR0_PERFMON_SHIFT, ++ ID_DFR0_PERFMON_8_1); + } + + return val; +-- +2.33.0 + diff --git a/series.conf b/series.conf index f5f2522..67b9be0 100644 --- a/series.conf +++ b/series.conf @@ -758,3 +758,5 @@ patches/0754-scsi-hisi_sas_v3_hw-Remove-extra-function-calls-for-.patch patches/0755-config-arm64-Enable-dubugfs-config-of-hisi-sas.patch patches/0756-crypto-hisilicon-Add-value-profile-support-for-kerne.patch patches/0757-Revert-genirq-Increase-the-number-of-IRQ-descriptors.patch +patches/arm64-cpufeature-Extract-capped-perfmon-fields.patch +patches/KVM-arm64-limit-PMU-version-to-PMUv3-for-ARMv8.1.patch -- 2.33.0

1 0

[PATCH OLK-5.10 0/5] SME bugfixes
by Wang ShaoBo 28 Nov '23

28 Nov '23

SME bugfixes Catalin Marinas (1): arm64: Remove the __user annotation for the restore_za_context() argument Christophe JAILLET (1): arm64/ptrace: Clean up error handling path in sve_set_common() Mark Brown (3): arm64: cpufeature: Add missing .field_width for GIC system registers arm64/signal: Flush FPSIMD register state when disabling streaming mode arm64/fpsimd: Sync and zero pad FPSIMD state for streaming SVE arch/arm64/kernel/cpufeature.c | 1 + arch/arm64/kernel/fpsimd.c | 3 ++- arch/arm64/kernel/ptrace.c | 3 ++- arch/arm64/kernel/signal.c | 12 +++++++++++- 4 files changed, 16 insertions(+), 3 deletions(-) -- 2.25.1

2 6

[PATCH OLK-5.10 0/7] support page eject
by Wupeng Ma 28 Nov '23

28 Nov '23

From: Ma Wupeng <mawupeng1(a)huawei.com> Page ejection is achieved by soft_offline_page and unpoison_memory. A linked list is maintained to log the pfns which are offlined by this module. Only the pfns present in the list is allowed to go online. The follow sysfs is introduced to online/offline page via this module, since there is a internal linked list to record all offlined pages, remove_page is introduce to remove this page from list. - /sys/kernel/page_eject/online_page - /sys/kernel/page_eject/offline_page - /sys/kernel/page_eject/remove_page Besides pag eject, machine check safe is enhanced as follow: During soft offline page, page is copied to new page in kernel. If the origin page has UCE, there will lead to kernel panic. In order to solve this problem, use machine check safe to catch this error which can be achieved by using copy_mc_to_kernel to replace copy_page. Signal SIGBUS will be send to user task if this UCE is consumed by this situation to avoid kernel panic. Jiaqi Yan (1): mm/hwpoison: introduce copy_mc_highpage Ma Wupeng (6): mm: introduce copy_mc_highpages mm: arm64: Add migrate_page_copy_mc() mm: Update PF_COREDUMP_MCS to PF_MCS mm/hwpoison: Export symbol soft_offline_page mm: page_eject: Introuduce page ejection mm: page_eject: Add mc support during offline page drivers/ras/Kconfig | 10 ++ drivers/ras/Makefile | 1 + drivers/ras/page_eject.c | 249 +++++++++++++++++++++++++++++++++++++++ fs/coredump.c | 4 +- include/linux/highmem.h | 49 ++++++++ include/linux/sched.h | 2 +- lib/iov_iter.c | 2 +- mm/memory-failure.c | 1 + mm/migrate.c | 63 ++++++++-- 9 files changed, 365 insertions(+), 16 deletions(-) create mode 100644 drivers/ras/page_eject.c -- 2.25.1

2 8

[PATCH OLK-5.10] mpam: Fix uninitialized value
by Yu Liao 28 Nov '23

28 Nov '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ZRRD -------------------------------- Fix the following smatch warning: drivers/acpi/arm64/mpam.c:219 acpi_mpam_parse_version() error: uninitialized symbol 'ret'. Fixes: b1e2f3d84839 ("[Backport] ACPI/MPAM: Adapt to Arm's MPAM ACPI table version 2") Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> --- drivers/acpi/arm64/mpam.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/arm64/mpam.c b/drivers/acpi/arm64/mpam.c index f625f539d50a..9d59652e49f8 100644 --- a/drivers/acpi/arm64/mpam.c +++ b/drivers/acpi/arm64/mpam.c @@ -219,7 +219,7 @@ int __init acpi_mpam_parse_version(void) { struct acpi_table_header *mpam, *pptt; acpi_status status; - int ret; + int ret = -EINVAL; if (!cpus_have_const_cap(ARM64_HAS_MPAM)) return 0; -- 2.25.1

2 1

[PATCH OLK-5.10] Revert "arm64/mpam: Fix mpam corrupt when cpu online"
by Yu Liao 28 Nov '23

28 Nov '23

From: Wang ShaoBo <bobo.shaobowang(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7R0WK ------------------------------------------------- BUG 'sleeping function called from invalid context' reported when setup MPAM driver, it was blamed to bc9e3f9895ef2 ("arm64/mpam: Fix mpam corrupt when cpu online"), which reported a 'Bad PC' BUG, but missing the right conclusion, finally disabling irqs before calling cpuhp_setup_state() may only affect the probability of reproduction. The reason why triggerring 'Bad PC' BUG report is because mpam_enable() is __init type function, and may schedule out after calling __cpuhp_setup_state()->__might_sleep(), so the space of mpam_enable() might be freed after scheduling back. As we have changed mpam_enable() to non-init type function, we can revert commit bc9e3f9895ef2 directly, to solve these both two problems. Fixes: bc9e3f9895ef2 ("arm64/mpam: Fix mpam corrupt when cpu online") Signed-off-by: Wang ShaoBo <bobo.shaobowang(a)huawei.com> Signed-off-by: Yu Liao <liaoyu15(a)huawei.com> --- arch/arm64/kernel/mpam/mpam_device.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/arch/arm64/kernel/mpam/mpam_device.c b/arch/arm64/kernel/mpam/mpam_device.c index 96288f66f619..b3de7f518423 100644 --- a/arch/arm64/kernel/mpam/mpam_device.c +++ b/arch/arm64/kernel/mpam/mpam_device.c @@ -621,11 +621,9 @@ static void mpam_enable(struct work_struct *work) pr_err("Failed to setup/init resctrl\n"); mutex_unlock(&mpam_devices_lock); - local_irq_disable(); mpam_cpuhp_state = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "mpam:online", mpam_cpu_online, mpam_cpu_offline); - local_irq_enable(); if (mpam_cpuhp_state <= 0) pr_err("Failed to re-register 'dyn' cpuhp callbacks"); mutex_unlock(&mpam_cpuhp_lock); -- 2.25.1

2 1

[PATCH OLK-5.10] posix-cpu-timers: Implement timer_wait_running callback
by Xiongfeng Wang 28 Nov '23

28 Nov '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7EQ8B -------------------------------- For posix CPU timers, the .timer_wait_running() callback is missing, which cause WARN_ON() in timer_wait_running(). Commit f7abf14f0001 ("posix-cpu-timers: Implement the missing timer_wait_running callback") solved the problem. But it introduce a kabi broken which is hard to fix. The commit also describe a livelock in preemptible kernel. To fix the livelock, we add cond_resched() in the retry loop. *** below is from origin commit merge tag The reason is that for CONFIG_POSIX_CPU_TIMERS_TASK_WORK enabled systems there is a livelock issue independent of RT. CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y moves the expiry of POSIX CPU timers out from hard interrupt context to task work, which is handled before returning to user space or to a VM. The expiry mechanism moves the expired timers to a stack local list head with sighand lock held. Once sighand is dropped the task can be preempted and a task which wants to delete a timer will spin-wait until the expiry task is scheduled back in. In the worst case this will end up in a livelock when the preempting task and the expiry task are pinned on the same CPU. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- kernel/time/posix-cpu-timers.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/kernel/time/posix-cpu-timers.c b/kernel/time/posix-cpu-timers.c index c97bc3e3b210..578d0ebedb67 100644 --- a/kernel/time/posix-cpu-timers.c +++ b/kernel/time/posix-cpu-timers.c @@ -1446,6 +1446,9 @@ static int do_cpu_nanosleep(const clockid_t which_clock, int flags, spin_lock_irq(&timer.it_lock); error = posix_cpu_timer_del(&timer); spin_unlock_irq(&timer.it_lock); +#ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK + cond_resched(); +#endif } if ((it.it_value.tv_sec | it.it_value.tv_nsec) == 0) { @@ -1546,6 +1549,18 @@ static int thread_cpu_timer_create(struct k_itimer *timer) return posix_cpu_timer_create(timer); } +static void posix_cpu_timer_wait_running(struct k_itimer *timr) +{ +#ifdef CONFIG_POSIX_CPU_TIMERS_TASK_WORK + rcu_read_unlock(); + cond_resched(); + rcu_read_lock(); +#else + cpu_relax(); +#endif +} + + const struct k_clock clock_posix_cpu = { .clock_getres = posix_cpu_clock_getres, .clock_set = posix_cpu_clock_set, @@ -1556,6 +1571,7 @@ const struct k_clock clock_posix_cpu = { .timer_del = posix_cpu_timer_del, .timer_get = posix_cpu_timer_get, .timer_rearm = posix_cpu_timer_rearm, + .timer_wait_running = posix_cpu_timer_wait_running, }; const struct k_clock clock_process = { -- 2.20.1

2 1

[PATCH OLK-6.6 0/6] Handle more faults under the VMA lock
by Tong Tiangen 28 Nov '23

28 Nov '23

At this point, we're handling the majority of file-backed page faults under the VMA lock, using the ->map_pages entry point. This patch set attempts to expand that for the following siutations: - We have to do a read. This could be because we've hit the point in the readahead window where we need to kick off the next readahead, or because the page is simply not present in cache. - We're handling a write fault. Most applications don't do I/O by writes to shared mmaps for very good reasons, but some do, and it'd be nice to not make that slow unnecessarily. - We're doing a COW of a private mapping (both PTE already present and PTE not-present). These are two different codepaths and I handle both of them in this patch set. There is no support in this patch set for drivers to mark themselves as being VMA lock friendly; they could implement the ->map_pages vm_operation, but if they do, they would be the first. This is probably something we want to change at some point in the future, and I've marked where to make that change in the code. There is very little performance change in the benchmarks we've run; mostly because the vast majority of page faults are handled through the other paths. I still think this patch series is useful for workloads that may take these paths more often, and just for cleaning up the fault path in general (it's now clearer why we have to retry in these cases). Matthew Wilcox (Oracle) (6): mm: make lock_folio_maybe_drop_mmap() VMA lock aware mm: call wp_page_copy() under the VMA lock mm: handle shared faults under the VMA lock mm: handle COW faults under the VMA lock mm: handle read faults under the VMA lock mm: handle write faults to RO pages under the VMA lock mm/filemap.c | 13 ++++---- mm/memory.c | 93 ++++++++++++++++++++++++++++++++-------------------- 2 files changed, 65 insertions(+), 41 deletions(-) -- 2.25.1

2 7

[PATCH OLK-5.10 00/80] sme backport from mainline
by Wang ShaoBo 28 Nov '23

28 Nov '23

sme backport from mainline Alexandru Elisei (1): arm64: Do not trap PMSNEVFR_EL1 Marc Zyngier (10): KVM: arm64: Let vcpu_sve_pffr() handle HYP VAs KVM: arm64: Provide KVM's own save/restore SVE primitives KVM: arm64: Use {read,write}_sysreg_el1 to access ZCR_EL1 KVM: arm64: Introduce vcpu_sve_vq() helper arm64: sve: Provide a conditional update accessor for ZCR_ELx KVM: arm64: Map SVE context at EL2 when available KVM: arm64: Rework SVE host-save/guest-restore KVM: arm64: Save guest's ZCR_EL1 before saving the FPSIMD state KVM: arm64: Save/restore SVE state for nVHE KVM: arm64: Always start with clearing SME flag on load Mark Brown (65): arm64/sve: Remove redundant system_supports_sve() tests arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/sve: Rework SVE access trap to convert state in registers arm64/sve: Split _sve_flush macro into separate Z and predicate flushes arm64/sve: Skip flushing Z registers with 128 bit vectors arm64/sve: Use the sve_flush macros in sve_load_from_fpsimd_state() arm64/sve: Remove sve_load_from_fpsimd_state() arm64/sve: Better handle failure to allocate SVE register storage arm64/fp: Reindent fpsimd_save() arm64/sve: Make access to FFR optional arm64/sve: Rename find_supported_vector_length() arm64/sve: Use accessor functions for vector lengths in thread_struct arm64/sve: Put system wide vector length information into structs arm64/sve: Explicitly load vector length when restoring SVE state arm64/sve: Track vector lengths for tasks in an array arm64/sve: Make sysctl interface for SVE reusable by SME arm64/sve: Generalise vector length configuration prctl() for SME arm64/sve: Minor clarification of ABI documentation arm64: cpufeature: Always specify and use a field width for capabilities arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64: Disable fine grained traps on boot arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls arm64/sme: Provide Kconfig for SME arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding() arm64/sme: More sensibly define the size for the ZA register set KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/fp: Make SVE and SME length register definition match architecture arm64/fp: Rename SVE and SME LEN field name to _WIDTH arm64/sme: Drop SYS_ from SMIDR_EL1 defines arm64/sme: Standardise bitfield names for SVCR arm64/sme: Remove _EL0 from name of SVCR - FIXME sysreg.h arm64/sme: Fix tests for 0b1111 value ID registers arm64/sme: Fix SVE/SME typo in ABI documentation arm64/sme: Fix EFI save/restore arm64/sme: Don't flush SVE register state when allocating SME storage arm64/sme: Don't flush SVE register state when handling SME traps arm64/ptrace: Don't clear calling process' TIF_SME on OOM arm64/signal: Always allocate SVE signal frames on SME only systems arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/sme: Optimise SME exit on syscall entry arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes arm64/sme: Set new vector length before reallocating arm64/fpsimd: Clear SME state in the target task when setting the VL arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems arm64/ptrace: Ensure that SME is set up for target when writing SSVE state Wan Jiabing (1): arm64/sme: Fix NULL check after kzalloc Will Deacon (1): arm64: sme: Use STR P to clear FFR context field in streaming SVE mode Xiaofei Tan (1): arm64: sve: Provide sve_cond_update_zcr_vq fallback when !ARM64_SVE Zenghui Yu (1): arm64: ptrace: Use ARM64_SME to guard the SME register enumerations Documentation/arm64/elf_hwcaps.rst | 34 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 ++++++++++ Documentation/arm64/sve.rst | 72 +- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpucaps.h | 2 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 266 ++++++- arch/arm64/include/asm/fpsimdmacros.h | 108 ++- arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_host.h | 14 +- arch/arm64/include/asm/kvm_hyp.h | 2 + arch/arm64/include/asm/processor.h | 78 +- arch/arm64/include/asm/signal_common.h | 19 +- arch/arm64/include/asm/sysreg.h | 79 +- arch/arm64/include/asm/thread_info.h | 4 +- arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 +- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 292 +++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 72 +- arch/arm64/kernel/fpsimd.c | 961 ++++++++++++++++++----- arch/arm64/kernel/head.S | 87 ++ arch/arm64/kernel/process.c | 45 +- arch/arm64/kernel/ptrace.c | 380 +++++++-- arch/arm64/kernel/signal.c | 179 ++++- arch/arm64/kernel/syscall.c | 25 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 70 +- arch/arm64/kvm/guest.c | 6 +- arch/arm64/kvm/hyp/fpsimd.S | 12 + arch/arm64/kvm/hyp/include/hyp/switch.h | 75 +- arch/arm64/kvm/hyp/nvhe/switch.c | 38 +- arch/arm64/kvm/hyp/vhe/switch.c | 10 +- arch/arm64/kvm/reset.c | 14 +- arch/arm64/kvm/sys_regs.c | 8 +- include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + 45 files changed, 3148 insertions(+), 476 deletions(-) create mode 100644 Documentation/arm64/sme.rst -- 2.25.1

1 80

[PATCH OLK-6.6 0/8] memcg_qos and memcg_async_reclaim
by Lu Jialin 28 Nov '23

28 Nov '23

Lu Jialin (8): cgroup: Export cgroup.kill from cgroupv2 to cgroupv1 memcg: Export memcg.{min/low} from cgroupv2 to cgroupv1 memcg: Export memcg.high from cgroupv2 to cgroupv1 memcg: Export memory.events and memory.events.local from cgroupv2 to cgroupv1 memcg: Fix inconsistent oom event behavior for OOM_MEMCG_KILL memcg: enable memcg async reclaim memcg: export high_async_ratio to userland memcg: Introduce CONFIG_MEMCG_V1_THRESHOLD_QOS arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/memcontrol.h | 24 +- init/Kconfig | 6 + kernel/cgroup/cgroup-internal.h | 3 + kernel/cgroup/cgroup-v1.c | 5 + kernel/cgroup/cgroup.c | 4 +- mm/memcontrol.c | 378 ++++++++++++++++++------- 8 files changed, 310 insertions(+), 112 deletions(-) -- 2.34.1

2 9

[PATCH OLK-5.10 00/80] sme backport from mainline
by Wang ShaoBo 28 Nov '23

28 Nov '23

sme backport from mainline Alexandru Elisei (1): arm64: Do not trap PMSNEVFR_EL1 Marc Zyngier (10): KVM: arm64: Let vcpu_sve_pffr() handle HYP VAs KVM: arm64: Provide KVM's own save/restore SVE primitives KVM: arm64: Use {read,write}_sysreg_el1 to access ZCR_EL1 KVM: arm64: Introduce vcpu_sve_vq() helper arm64: sve: Provide a conditional update accessor for ZCR_ELx KVM: arm64: Map SVE context at EL2 when available KVM: arm64: Rework SVE host-save/guest-restore KVM: arm64: Save guest's ZCR_EL1 before saving the FPSIMD state KVM: arm64: Save/restore SVE state for nVHE KVM: arm64: Always start with clearing SME flag on load Mark Brown (65): arm64/sve: Remove redundant system_supports_sve() tests arm64/sve: Add compile time checks for SVE hooks in generic functions arm64/sve: Rework SVE access trap to convert state in registers arm64/sve: Split _sve_flush macro into separate Z and predicate flushes arm64/sve: Skip flushing Z registers with 128 bit vectors arm64/sve: Use the sve_flush macros in sve_load_from_fpsimd_state() arm64/sve: Remove sve_load_from_fpsimd_state() arm64/sve: Better handle failure to allocate SVE register storage arm64/fp: Reindent fpsimd_save() arm64/sve: Make access to FFR optional arm64/sve: Rename find_supported_vector_length() arm64/sve: Use accessor functions for vector lengths in thread_struct arm64/sve: Put system wide vector length information into structs arm64/sve: Explicitly load vector length when restoring SVE state arm64/sve: Track vector lengths for tasks in an array arm64/sve: Make sysctl interface for SVE reusable by SME arm64/sve: Generalise vector length configuration prctl() for SME arm64/sve: Minor clarification of ABI documentation arm64: cpufeature: Always specify and use a field width for capabilities arm64/sme: Provide ABI documentation for SME arm64/sme: System register and exception syndrome definitions arm64/sme: Manually encode SME instructions arm64: Disable fine grained traps on boot arm64/sme: Early CPU setup for SME arm64/sme: Basic enumeration support arm64/sme: Identify supported SME vector lengths at boot arm64/sme: Implement sysctl to set the default vector length arm64/sme: Implement vector length configuration prctl()s arm64/sme: Implement support for TPIDR2 arm64/sme: Implement SVCR context switching arm64/sme: Implement streaming SVE context switching arm64/sme: Implement ZA context switching arm64/sme: Implement traps and syscall handling for SME arm64/sme: Disable ZA and streaming mode when handling signals arm64/sme: Implement streaming SVE signal handling arm64/sme: Implement ZA signal handling arm64/sme: Implement ptrace support for streaming mode SVE registers arm64/sme: Add ptrace support for ZA arm64/sme: Disable streaming mode and ZA when flushing CPU state arm64/sme: Save and restore streaming mode over EFI runtime calls arm64/sme: Provide Kconfig for SME arm64/sme: Add ID_AA64SMFR0_EL1 to __read_sysreg_by_encoding() arm64/sme: More sensibly define the size for the ZA register set KVM: arm64: Hide SME system registers from guests KVM: arm64: Trap SME usage in guest KVM: arm64: Handle SME host state when running guests arm64/fp: Make SVE and SME length register definition match architecture arm64/fp: Rename SVE and SME LEN field name to _WIDTH arm64/sme: Drop SYS_ from SMIDR_EL1 defines arm64/sme: Standardise bitfield names for SVCR arm64/sme: Remove _EL0 from name of SVCR - FIXME sysreg.h arm64/sme: Fix tests for 0b1111 value ID registers arm64/sme: Fix SVE/SME typo in ABI documentation arm64/sme: Fix EFI save/restore arm64/sme: Don't flush SVE register state when allocating SME storage arm64/sme: Don't flush SVE register state when handling SME traps arm64/ptrace: Don't clear calling process' TIF_SME on OOM arm64/signal: Always allocate SVE signal frames on SME only systems arm64/sme: Don't use streaming mode to probe the maximum SME VL arm64/sme: Optimise SME exit on syscall entry arm64/fpsimd: Ensure SME storage is allocated after SVE VL changes arm64/sme: Set new vector length before reallocating arm64/fpsimd: Clear SME state in the target task when setting the VL arm64/fpsimd: Sync FPSIMD state with SVE for SME only systems arm64/ptrace: Ensure that SME is set up for target when writing SSVE state Wan Jiabing (1): arm64/sme: Fix NULL check after kzalloc Will Deacon (1): arm64: sme: Use STR P to clear FFR context field in streaming SVE mode Xiaofei Tan (1): arm64: sve: Provide sve_cond_update_zcr_vq fallback when !ARM64_SVE Zenghui Yu (1): arm64: ptrace: Use ARM64_SME to guard the SME register enumerations Documentation/arm64/elf_hwcaps.rst | 34 + Documentation/arm64/index.rst | 1 + Documentation/arm64/sme.rst | 428 ++++++++++ Documentation/arm64/sve.rst | 72 +- arch/arm64/Kconfig | 11 + arch/arm64/include/asm/cpu.h | 4 + arch/arm64/include/asm/cpucaps.h | 2 + arch/arm64/include/asm/cpufeature.h | 25 + arch/arm64/include/asm/esr.h | 13 +- arch/arm64/include/asm/exception.h | 1 + arch/arm64/include/asm/fpsimd.h | 266 ++++++- arch/arm64/include/asm/fpsimdmacros.h | 108 ++- arch/arm64/include/asm/hwcap.h | 8 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_host.h | 14 +- arch/arm64/include/asm/kvm_hyp.h | 2 + arch/arm64/include/asm/processor.h | 78 +- arch/arm64/include/asm/signal_common.h | 19 +- arch/arm64/include/asm/sysreg.h | 79 +- arch/arm64/include/asm/thread_info.h | 4 +- arch/arm64/include/uapi/asm/hwcap.h | 8 + arch/arm64/include/uapi/asm/ptrace.h | 69 +- arch/arm64/include/uapi/asm/sigcontext.h | 55 +- arch/arm64/kernel/cpufeature.c | 292 +++++-- arch/arm64/kernel/cpuinfo.c | 13 + arch/arm64/kernel/entry-common.c | 11 + arch/arm64/kernel/entry-fpsimd.S | 72 +- arch/arm64/kernel/fpsimd.c | 961 ++++++++++++++++++----- arch/arm64/kernel/head.S | 87 ++ arch/arm64/kernel/process.c | 45 +- arch/arm64/kernel/ptrace.c | 380 +++++++-- arch/arm64/kernel/signal.c | 179 ++++- arch/arm64/kernel/syscall.c | 25 +- arch/arm64/kernel/traps.c | 1 + arch/arm64/kvm/fpsimd.c | 70 +- arch/arm64/kvm/guest.c | 6 +- arch/arm64/kvm/hyp/fpsimd.S | 12 + arch/arm64/kvm/hyp/include/hyp/switch.h | 75 +- arch/arm64/kvm/hyp/nvhe/switch.c | 38 +- arch/arm64/kvm/hyp/vhe/switch.c | 10 +- arch/arm64/kvm/reset.c | 14 +- arch/arm64/kvm/sys_regs.c | 8 +- include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 9 + kernel/sys.c | 12 + 45 files changed, 3148 insertions(+), 476 deletions(-) create mode 100644 Documentation/arm64/sme.rst -- 2.25.1

1 80

[PATCH 0/4] mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO
by Jinjiang Tu 28 Nov '23

28 Nov '23

This series moves the boot time initialization of tail struct pages of a gigantic page to later on in the boot. Only the HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages are initialized at the start. If HVO is successful, then no more tail struct pages need to be initialized. For a 1G hugepage, this series avoid initialization of 262144 - 63 = 262081 struct pages per hugepage. When tested on a 512G system (allocating 500 1G hugepages), the kexec-boot times with DEFERRED_STRUCT_PAGE_INIT enabled are: - with patches, HVO enabled: 1.32 seconds - with patches, HVO disabled: 2.15 seconds - without patches, HVO enabled: 3.90 seconds - without patches, HVO disabled: 3.58 seconds This represents an approximately 70% reduction in boot time and will significantly reduce server downtime when using a large number of gigantic pages. Usama Arif (4): mm: hugetlb_vmemmap: use nid of the head page to reallocate it memblock: pass memblock_type to memblock_setclr_flag memblock: introduce MEMBLOCK_RSRV_NOINIT flag mm: hugetlb: skip initialization of gigantic tail struct pages if freed by HVO include/linux/memblock.h | 9 ++++++ mm/hugetlb.c | 68 ++++++++++++++++++++++++++++++++++------ mm/hugetlb_vmemmap.c | 4 +-- mm/hugetlb_vmemmap.h | 9 +++--- mm/internal.h | 3 ++ mm/memblock.c | 49 +++++++++++++++++++++-------- mm/mm_init.c | 2 +- 7 files changed, 115 insertions(+), 29 deletions(-) -- 2.25.1

1 4

[PATCH OLK-6.6 0/4] mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO
by Jinjiang Tu 28 Nov '23

28 Nov '23

This series moves the boot time initialization of tail struct pages of a gigantic page to later on in the boot. Only the HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages are initialized at the start. If HVO is successful, then no more tail struct pages need to be initialized. For a 1G hugepage, this series avoid initialization of 262144 - 63 = 262081 struct pages per hugepage. When tested on a 512G system (allocating 500 1G hugepages), the kexec-boot times with DEFERRED_STRUCT_PAGE_INIT enabled are: - with patches, HVO enabled: 1.32 seconds - with patches, HVO disabled: 2.15 seconds - without patches, HVO enabled: 3.90 seconds - without patches, HVO disabled: 3.58 seconds This represents an approximately 70% reduction in boot time and will significantly reduce server downtime when using a large number of gigantic pages. Usama Arif (4): mm: hugetlb_vmemmap: use nid of the head page to reallocate it memblock: pass memblock_type to memblock_setclr_flag memblock: introduce MEMBLOCK_RSRV_NOINIT flag mm: hugetlb: skip initialization of gigantic tail struct pages if freed by HVO include/linux/memblock.h | 9 ++++++ mm/hugetlb.c | 68 ++++++++++++++++++++++++++++++++++------ mm/hugetlb_vmemmap.c | 4 +-- mm/hugetlb_vmemmap.h | 9 +++--- mm/internal.h | 3 ++ mm/memblock.c | 49 +++++++++++++++++++++-------- mm/mm_init.c | 2 +- 7 files changed, 115 insertions(+), 29 deletions(-) -- 2.25.1

2 5

[PATCH v3 OLK-6.6 00/17] Support Qos scheduler
by Wenyu Huang 28 Nov '23

28 Nov '23

This patch adds the Qos scheduler. Hui Tang (1): sched: Fix null-ptr-deref in free_fair_sched_group Xia Fukun (1): sched/qos: Fix warning in CPU hotplug scenarios Zhang Qiao (15): sched: Introduce qos scheduler for co-location sched: Throttle qos cfs_rq when current cpu is running online task sched: Fix offline task can't be killed in a timely sched: Unthrottle the throttled cfs rq when offline rq sched: Unthrottle qos cfs rq when free a task group sched: bugfix setscheduler unlock cpuset_rwsem sched: Introduce handle priority reversion mechanism sched: enable CONFIG_QOS_SCHED on arm64 sched: Fix sleeping in atomic context at cpu_qos_write() sched/fair: Add qos_throttle_list node in struct cfs_rq sched: Throttle offline task at tracehook_notify_resume() sched/qos: Add qos_tg_{throttle,unthrottle}_{up,down} sched/fair: Update rq clock before unthrottle a qos cfs_rq sched/qos: Don't unthrottle cfs_rq when cfs_rq is throttled by qos sched: Enable qos scheduler config arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/cgroup.h | 4 + include/linux/resume_user_mode.h | 5 + include/linux/sched.h | 23 ++ include/linux/sched/sysctl.h | 8 + init/Kconfig | 12 + kernel/cgroup/cgroup.c | 22 ++ kernel/sched/core.c | 155 +++++++++++ kernel/sched/fair.c | 357 ++++++++++++++++++++++++- kernel/sched/sched.h | 12 + kernel/signal.c | 3 + kernel/sysctl.c | 24 ++ 13 files changed, 626 insertions(+), 1 deletion(-) -- 2.34.1

2 18

[PATCH OLK-6.6 0/3] Introduce NEON implementation of CRCT10DIF algorithm
by GUO Zihua 28 Nov '23

28 Nov '23

This patchset introduces ARM64 NEON implementation of CRC T10 DIF algorithm. This algorithm could be enabled by enabling CONFIG_CRYPTO_CRCT10DIF_ARM64_NEON, and the compiled KO is named crct10dif-neon.ko GUO Zihua (2): arm64/crypto: Introduce individual config for CRCT10DIF-NEON algorithm crypto: crct10dif-neon - fix use via crypto_shash_digest() YueHaibing (1): arm64/crypto: Accelerated CRC T10 DIF computation arch/arm64/crypto/Kconfig | 10 + arch/arm64/crypto/Makefile | 4 + arch/arm64/crypto/crct10dif-neon-asm_64.S | 752 ++++++++++++++++++++++ arch/arm64/crypto/crct10dif-neon_glue.c | 114 ++++ 4 files changed, 880 insertions(+) create mode 100644 arch/arm64/crypto/crct10dif-neon-asm_64.S create mode 100644 arch/arm64/crypto/crct10dif-neon_glue.c -- 2.34.1

2 4

[PATCH OLK-6.6 0/1] Random boot-time optimization
by GUO Zihua 28 Nov '23

28 Nov '23

This patch introduced random boot-time initialization optimization. The optimization works by disabling the deferring of interrupt randomness work until random is fully initialized. Xingjun Liu (1): alinux: random: speed up the initialization of module drivers/char/random.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) -- 2.34.1

2 2

[PATCH 03/15] crypto: hisilicon/zip - add zip comp high perf mode configuration
by Zhiqi Song 28 Nov '23

28 Nov '23

From: Chenghai Huang <huangchenghai2(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8IVG6 CVE: NA ---------------------------------------------------------------------- To meet specific application scenarios, the function of switching between the high performance mode and the high compression mode is added. Use the perf_mode=0/1 configuration to set the compression high perf mode, 0(default, high compression mode), 1(high performance mode). These two modes only apply to the compression direction and are compatible with software algorithm in both directions. Signed-off-by: Chenghai Huang <huangchenghai2(a)huawei.com> Signed-off-by: JiangShui Yang <yangjiangshui(a)h-partners.com> --- drivers/crypto/hisilicon/zip/zip_main.c | 65 +++++++++++++++++++++++++ 1 file changed, 65 insertions(+) diff --git a/drivers/crypto/hisilicon/zip/zip_main.c b/drivers/crypto/hisilicon/zip/zip_main.c index 3c00bb1474ee..998ddffb662a 100644 --- a/drivers/crypto/hisilicon/zip/zip_main.c +++ b/drivers/crypto/hisilicon/zip/zip_main.c @@ -106,6 +106,14 @@ #define HZIP_CLOCK_GATED_EN (HZIP_CORE_GATED_EN | \ HZIP_CORE_GATED_OOO_EN) +/* zip comp high performance */ +#define HZIP_HIGH_PERF_OFFSET 0x301208 + +enum { + HZIP_HIGH_COMP_RATE, + HZIP_HIGH_COMP_PERF, +}; + static const char hisi_zip_name[] = "hisi_zip"; static struct dentry *hzip_debugfs_root; @@ -366,6 +374,37 @@ static int hzip_diff_regs_show(struct seq_file *s, void *unused) return 0; } DEFINE_SHOW_ATTRIBUTE(hzip_diff_regs); + +static int perf_mode_set(const char *val, const struct kernel_param *kp) +{ + int ret; + u32 n; + + if (!val) + return -EINVAL; + + ret = kstrtou32(val, 10, &n); + if (ret != 0 || (n != HZIP_HIGH_COMP_PERF && + n != HZIP_HIGH_COMP_RATE)) + return -EINVAL; + + return param_set_int(val, kp); +} + +static const struct kernel_param_ops zip_com_perf_ops = { + .set = perf_mode_set, + .get = param_get_int, +}; + +/* + * perf_mode = 0 means enable high compression rate mode, + * perf_mode = 1 means enable high compression performance mode. + * These two modes only apply to the compression direction. + */ +static u32 perf_mode = HZIP_HIGH_COMP_RATE; +module_param_cb(perf_mode, &zip_com_perf_ops, &perf_mode, 0444); +MODULE_PARM_DESC(perf_mode, "ZIP high perf mode 0(default), 1(enable)"); + static const struct kernel_param_ops zip_uacce_mode_ops = { .set = uacce_mode_set, .get = param_get_int, @@ -431,6 +470,28 @@ bool hisi_zip_alg_support(struct hisi_qm *qm, u32 alg) return false; } +static int hisi_zip_set_high_perf(struct hisi_qm *qm) +{ + u32 val; + int ret; + + val = readl_relaxed(qm->io_base + HZIP_HIGH_PERF_OFFSET); + if (perf_mode == HZIP_HIGH_COMP_PERF) + val |= HZIP_HIGH_COMP_PERF; + else + val &= ~HZIP_HIGH_COMP_PERF; + + /* Set perf mode */ + writel(val, qm->io_base + HZIP_HIGH_PERF_OFFSET); + ret = readl_relaxed_poll_timeout(qm->io_base + HZIP_HIGH_PERF_OFFSET, + val, val == perf_mode, HZIP_DELAY_1_US, + HZIP_POLL_TIMEOUT_US); + if (ret) + pci_err(qm->pdev, "failed to set perf mode\n"); + + return ret; +} + static void hisi_zip_open_sva_prefetch(struct hisi_qm *qm) { u32 val; @@ -1113,6 +1174,10 @@ static int hisi_zip_pf_probe_init(struct hisi_zip *hisi_zip) if (ret) return ret; + ret = hisi_zip_set_high_perf(qm); + if (ret) + return ret; + hisi_zip_open_sva_prefetch(qm); hisi_qm_dev_err_init(qm); hisi_zip_debug_regs_clear(qm); -- 2.33.0

1 0

[PATCH 1/3] crypto: hisilicon/sgl - small cleanups for sgl.c
by Weili Qian 28 Nov '23

28 Nov '23

driver inclusion category: cleanup bugzilla: https://gitee.com/openeuler/kernel/issues/I8IVG6 CVE: NA ---------------------------------------------------------------------- 1. Remove unnecessary brackets in function hisi_acc_create_sgl_pool(). 2. Modify local variable type, ensure that the variable type is consistent with the variable type to be compared. 3. Because the function clear_hw_sgl_sge() is in the task process, obtain the value of le16_to_cpu(hw_sgl->entry_sum_in_sgl) before loop execting to shorten the loop execution time. Signed-off-by: Weili Qian <qianweili(a)huawei.com> Signed-off-by: JiangShui Yang <yangjiangshui(a)h-partners.com> --- drivers/crypto/hisilicon/sgl.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/hisilicon/sgl.c b/drivers/crypto/hisilicon/sgl.c index 09586a837b1e..6f281d808a0f 100644 --- a/drivers/crypto/hisilicon/sgl.c +++ b/drivers/crypto/hisilicon/sgl.c @@ -121,10 +121,10 @@ struct hisi_acc_sgl_pool *hisi_acc_create_sgl_pool(struct device *dev, return pool; err_free_mem: - for (j = 0; j < i; j++) { + for (j = 0; j < i; j++) dma_free_coherent(dev, block_size, block[j].sgl, block[j].sgl_dma); - } + kfree_sensitive(pool); return ERR_PTR(-ENOMEM); } @@ -140,7 +140,7 @@ EXPORT_SYMBOL_GPL(hisi_acc_create_sgl_pool); void hisi_acc_free_sgl_pool(struct device *dev, struct hisi_acc_sgl_pool *pool) { struct mem_block *block; - int i; + u32 i; if (!dev || !pool) return; @@ -196,9 +196,10 @@ static void update_hw_sgl_sum_sge(struct hisi_acc_hw_sgl *hw_sgl, u16 sum) static void clear_hw_sgl_sge(struct hisi_acc_hw_sgl *hw_sgl) { struct acc_hw_sge *hw_sge = hw_sgl->sge_entries; + u16 entry_sum = le16_to_cpu(hw_sgl->entry_sum_in_sgl); int i; - for (i = 0; i < le16_to_cpu(hw_sgl->entry_sum_in_sgl); i++) { + for (i = 0; i < entry_sum; i++) { hw_sge[i].page_ctrl = NULL; hw_sge[i].buf = 0; hw_sge[i].len = 0; @@ -223,10 +224,11 @@ hisi_acc_sg_buf_map_to_hw_sgl(struct device *dev, u32 index, dma_addr_t *hw_sgl_dma) { struct hisi_acc_hw_sgl *curr_hw_sgl; + unsigned int i, sg_n_mapped; dma_addr_t curr_sgl_dma = 0; struct acc_hw_sge *curr_hw_sge; struct scatterlist *sg; - int i, sg_n, sg_n_mapped; + int sg_n; if (!dev || !sgl || !pool || !hw_sgl_dma) return ERR_PTR(-EINVAL); -- 2.33.0

1 2

[PATCH v2 OLK-6.6 00/17] Support Qos scheduler
by Wenyu Huang 28 Nov '23

28 Nov '23

Hui Tang (1): sched: Fix null-ptr-deref in free_fair_sched_group Xia Fukun (1): sched/qos: Fix warning in CPU hotplug scenarios Zhang Qiao (15): sched: Introduce qos scheduler for co-location sched: Throttle qos cfs_rq when current cpu is running online task sched: Fix offline task can't be killed in a timely sched: Unthrottle the throttled cfs rq when offline rq sched: Unthrottle qos cfs rq when free a task group sched: bugfix setscheduler unlock cpuset_rwsem sched: Introduce handle priority reversion mechanism sched: enable CONFIG_QOS_SCHED on arm64 sched: Fix sleeping in atomic context at cpu_qos_write() sched/fair: Add qos_throttle_list node in struct cfs_rq sched: Throttle offline task at tracehook_notify_resume() sched/qos: Add qos_tg_{throttle,unthrottle}_{up,down} sched/fair: Update rq clock before unthrottle a qos cfs_rq sched/qos: Don't unthrottle cfs_rq when cfs_rq is throttled by qos sched: Enable qos scheduler config arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/cgroup.h | 4 + include/linux/resume_user_mode.h | 5 + include/linux/sched.h | 23 ++ include/linux/sched/sysctl.h | 8 + init/Kconfig | 12 + kernel/cgroup/cgroup.c | 22 ++ kernel/sched/core.c | 155 +++++++++++ kernel/sched/fair.c | 357 ++++++++++++++++++++++++- kernel/sched/sched.h | 12 + kernel/signal.c | 3 + kernel/sysctl.c | 24 ++ 13 files changed, 626 insertions(+), 1 deletion(-) -- 2.34.1

1 17

[PATCH OLK-5.10] ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
by Zhengchao Shao 28 Nov '23

28 Nov '23

mainline inclusion from mainline-v6.7-rc2 commit e2b706c691905fe78468c361aaabc719d0a496f1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8K0N2 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: <TASK> igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) </TASK> The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Reviewed-by: Hangbin Liu <liuhangbin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/ipv4/igmp.c Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- net/ipv4/igmp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index c71b863093ac..73c24ce011f0 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -216,8 +216,10 @@ static void igmp_start_timer(struct ip_mc_list *im, int max_delay) int tv = prandom_u32() % max_delay; im->tm_running = 1; - if (!mod_timer(&im->timer, jiffies+tv+2)) - refcount_inc(&im->refcnt); + if (refcount_inc_not_zero(&im->refcnt)) { + if (mod_timer(&im->timer, jiffies + tv + 2)) + ip_ma_put(im); + } } static void igmp_gq_start_timer(struct in_device *in_dev) -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] ipv4: igmp: fix refcnt uaf issue when receiving igmp query packet
by Zhengchao Shao 28 Nov '23

28 Nov '23

mainline inclusion from mainline-v6.7-rc2 commit e2b706c691905fe78468c361aaabc719d0a496f1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8K0N2 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When I perform the following test operations: 1.ip link add br0 type bridge 2.brctl addif br0 eth0 3.ip addr add 239.0.0.1/32 dev eth0 4.ip addr add 239.0.0.1/32 dev br0 5.ip addr add 224.0.0.1/32 dev br0 6.while ((1)) do ifconfig br0 up ifconfig br0 down done 7.send IGMPv2 query packets to port eth0 continuously. For example, ./mausezahn ethX -c 0 "01 00 5e 00 00 01 00 72 19 88 aa 02 08 00 45 00 00 1c 00 01 00 00 01 02 0e 7f c0 a8 0a b7 e0 00 00 01 11 64 ee 9b 00 00 00 00" The preceding tests may trigger the refcnt uaf issue of the mc list. The stack is as follows: refcount_t: addition on 0; use-after-free. WARNING: CPU: 21 PID: 144 at lib/refcount.c:25 refcount_warn_saturate (lib/refcount.c:25) CPU: 21 PID: 144 Comm: ksoftirqd/21 Kdump: loaded Not tainted 6.7.0-rc1-next-20231117-dirty #80 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:refcount_warn_saturate (lib/refcount.c:25) RSP: 0018:ffffb68f00657910 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff8a00c3bf96c0 RCX: ffff8a07b6160908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff8a07b6160900 RBP: ffff8a00cba36862 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffb68f006577c0 R11: ffffffffb0fdcdc8 R12: ffff8a00c3bf9680 R13: ffff8a00c3bf96f0 R14: 0000000000000000 R15: ffff8a00d8766e00 FS: 0000000000000000(0000) GS:ffff8a07b6140000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055f10b520b28 CR3: 000000039741a000 CR4: 00000000000006f0 Call Trace: <TASK> igmp_heard_query (net/ipv4/igmp.c:1068) igmp_rcv (net/ipv4/igmp.c:1132) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) netif_receive_skb_internal (net/core/dev.c:5729) netif_receive_skb (net/core/dev.c:5788) br_handle_frame_finish (net/bridge/br_input.c:216) nf_hook_bridge_pre (net/bridge/br_input.c:294) __netif_receive_skb_core (net/core/dev.c:5423) __netif_receive_skb_list_core (net/core/dev.c:5606) __netif_receive_skb_list (net/core/dev.c:5674) netif_receive_skb_list_internal (net/core/dev.c:5764) napi_gro_receive (net/core/gro.c:609) e1000_clean_rx_irq (drivers/net/ethernet/intel/e1000/e1000_main.c:4467) e1000_clean (drivers/net/ethernet/intel/e1000/e1000_main.c:3805) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6735) __do_softirq (kernel/softirq.c:554) run_ksoftirqd (kernel/softirq.c:913) smpboot_thread_fn (kernel/smpboot.c:164) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:250) </TASK> The root causes are as follows: Thread A Thread B ... netif_receive_skb br_dev_stop ... br_multicast_leave_snoopers ... __ip_mc_dec_group ... __igmp_group_dropped igmp_rcv igmp_stop_timer igmp_heard_query //ref = 1 ip_ma_put igmp_mod_timer refcount_dec_and_test igmp_start_timer //ref = 0 ... refcount_inc //ref increases from 0 When the device receives an IGMPv2 Query message, it starts the timer immediately, regardless of whether the device is running. If the device is down and has left the multicast group, it will cause the mc list refcount uaf issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Reviewed-by: Hangbin Liu <liuhangbin(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/ipv4/igmp.c Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- net/ipv4/igmp.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c index 834780a8baf6..c4b396968acd 100644 --- a/net/ipv4/igmp.c +++ b/net/ipv4/igmp.c @@ -221,8 +221,10 @@ static void igmp_start_timer(struct ip_mc_list *im, int max_delay) int tv = prandom_u32() % max_delay; im->tm_running = 1; - if (!mod_timer(&im->timer, jiffies+tv+2)) - refcount_inc(&im->refcnt); + if (refcount_inc_not_zero(&im->refcnt)) { + if (mod_timer(&im->timer, jiffies + tv + 2)) + ip_ma_put(im); + } } static void igmp_gq_start_timer(struct in_device *in_dev) -- 2.34.1

2 1

[PATCH OLK-5.10 v8 00/20] introduce smart_grid zone
by Yipeng Zou 28 Nov '23

28 Nov '23

The patch sets include two parts: 1. patch 1~15,20: Rebase smart_grid from openeuler-1.0-LTS to OLK-5.10 2. patch 16~19: introduce smart_grid zone qos and cpufreq Since v7: 1. Update x86 openeuler_defconfig Since v6: 1. check is timer active in affinity timer Since v5: 1. Fix race condition in smart_grid_governor_enable. 2. Fix race condition in stop_auto_affinity. 3. Fix some str to int input in smart_grid_level_write. Since v4: 1. Place the highest level task in current domain level itself in sched_grid_prefer_cpus Since v3: 1. fix CI warning Since v2: 1. static alloc sg_zone cpumask. 2. fix some warning Hui Tang (13): sched: Introduce smart grid scheduling strategy for cfs sched: fix smart grid usage count sched: fix WARN found by deadlock detect sched: Fix possible deadlock in tg_set_dynamic_affinity_mode sched: Fix negative count for jump label sched: Fix timer storm for smart grid sched: fix dereference NULL pointers sched: Fix memory leak on error branch sched: clear credit count in error branch sched: Adjust few parameters range for smart grid sched: Delete redundant updates to p->prefer_cpus sched: Fix memory leak for smart grid sched: Fix null pointer derefrence for sd->span Wang ShaoBo (2): sched: smart grid: init sched_grid_qos structure on QOS purpose config: enable CONFIG_QOS_SCHED_SMART_GRID by default Yipeng Zou (5): sched: introduce smart grid qos zone smart_grid: introduce /proc/pid/smart_grid_level smart_grid: introduce smart_grid_strategy_ctrl sysctl smart_grid: cpufreq: introduce smart_grid cpufreq control sched: smart grid: check is active in affinity timer arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + drivers/cpufreq/cpufreq.c | 232 ++++++++++++ fs/proc/array.c | 13 + fs/proc/base.c | 78 ++++ include/linux/cpufreq.h | 11 + include/linux/sched.h | 22 ++ include/linux/sched/grid_qos.h | 135 +++++++ include/linux/sched/sysctl.h | 5 + init/Kconfig | 13 + kernel/fork.c | 15 +- kernel/sched/Makefile | 1 + kernel/sched/core.c | 160 +++++++- kernel/sched/fair.c | 500 ++++++++++++++++++++++++- kernel/sched/grid/Makefile | 2 + kernel/sched/grid/internal.h | 6 + kernel/sched/grid/power.c | 27 ++ kernel/sched/grid/qos.c | 273 ++++++++++++++ kernel/sched/grid/stat.c | 47 +++ kernel/sched/sched.h | 48 +++ kernel/sysctl.c | 22 +- mm/mempolicy.c | 12 +- 22 files changed, 1606 insertions(+), 18 deletions(-) create mode 100644 include/linux/sched/grid_qos.h create mode 100644 kernel/sched/grid/Makefile create mode 100644 kernel/sched/grid/internal.h create mode 100644 kernel/sched/grid/power.c create mode 100644 kernel/sched/grid/qos.c create mode 100644 kernel/sched/grid/stat.c -- 2.34.1

2 21

[PATCH OLK-6.6 v2 0/1] Added SM3 as module signing algorithm
by GUO Zihua 28 Nov '23

28 Nov '23

This patch adds SM3 as one of the module signing algorithm. v2: Updated related issue. GUO Zihua (1): keys: Allow automatic module signature with SM3 kernel/module/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) -- 2.34.1

2 2

[PATCH OLK-5.10 0/2] fix ksmbd to release the ones allocated for async work
by Zizhi Wo 28 Nov '23

28 Nov '23

fix typo and add release_async_work() to delete asynchronous work. Dawei Li (1): ksmbd: fix typo, syncronous->synchronous Namjae Jeon (1): ksmbd: delete asynchronous work from list fs/ksmbd/connection.c | 12 +++++------- fs/ksmbd/ksmbd_work.h | 2 +- fs/ksmbd/smb2pdu.c | 28 +++++++++++++++++++++------- fs/ksmbd/smb2pdu.h | 1 + 4 files changed, 28 insertions(+), 15 deletions(-) -- 2.39.2

2 3

[PATCH OLK-6.6 00/17] Support Qos scheduler
by Wenyu Huang 28 Nov '23

28 Nov '23

Hui Tang (1): sched: Fix null-ptr-deref in free_fair_sched_group Xia Fukun (1): sched/qos: Fix warning in CPU hotplug scenarios Zhang Qiao (15): sched: Introduce qos scheduler for co-location sched: Throttle qos cfs_rq when current cpu is running online task sched: Fix offline task can't be killed in a timely sched: Unthrottle the throttled cfs rq when offline rq sched: Unthrottle qos cfs rq when free a task group sched: bugfix setscheduler unlock cpuset_rwsem sched: Introduce handle priority reversion mechanism sched: enable CONFIG_QOS_SCHED on arm64 sched: Fix sleeping in atomic context at cpu_qos_write() sched/fair: Add qos_throttle_list node in struct cfs_rq sched: Throttle offline task at tracehook_notify_resume() sched/qos: Add qos_tg_{throttle,unthrottle}_{up,down} sched/fair: Update rq clock before unthrottle a qos cfs_rq sched/qos: Don't unthrottle cfs_rq when cfs_rq is throttled by qos sched: Enable qos scheduler config arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/cgroup.h | 4 + include/linux/resume_user_mode.h | 5 + include/linux/sched.h | 23 ++ include/linux/sched/sysctl.h | 8 + init/Kconfig | 12 + kernel/cgroup/cgroup.c | 22 ++ kernel/sched/core.c | 155 +++++++++++ kernel/sched/fair.c | 357 ++++++++++++++++++++++++- kernel/sched/sched.h | 12 + kernel/signal.c | 3 + kernel/sysctl.c | 24 ++ 13 files changed, 626 insertions(+), 1 deletion(-) -- 2.34.1

1 17

[PATCH OLK-5.10 v4 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 28 Nov '23

28 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

2 21

[PATCH OLK-5.10] ipmi_si: fix a memleak in try_smi_init()
by Yi Yang 28 Nov '23

28 Nov '23

stable inclusion from stable-v5.10.195 commit 5c5f02e16b919c8cb6024dc3778c8d8f1fb1f26b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7GMMZ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 6cf1a126de2992b4efe1c3c4d398f8de4aed6e3f upstream. Kmemleak reported the following leak info in try_smi_init(): unreferenced object 0xffff00018ecf9400 (size 1024): comm "modprobe", pid 2707763, jiffies 4300851415 (age 773.308s) backtrace: [<000000004ca5b312>] __kmalloc+0x4b8/0x7b0 [<00000000953b1072>] try_smi_init+0x148/0x5dc [ipmi_si] [<000000006460d325>] 0xffff800081b10148 [<0000000039206ea5>] do_one_initcall+0x64/0x2a4 [<00000000601399ce>] do_init_module+0x50/0x300 [<000000003c12ba3c>] load_module+0x7a8/0x9e0 [<00000000c246fffe>] __se_sys_init_module+0x104/0x180 [<00000000eea99093>] __arm64_sys_init_module+0x24/0x30 [<0000000021b1ef87>] el0_svc_common.constprop.0+0x94/0x250 [<0000000070f4f8b7>] do_el0_svc+0x48/0xe0 [<000000005a05337f>] el0_svc+0x24/0x3c [<000000005eb248d6>] el0_sync_handler+0x160/0x164 [<0000000030a59039>] el0_sync+0x160/0x180 The problem was that when an error occurred before handlers registration and after allocating `new_smi->si_sm`, the variable wouldn't be freed in the error handling afterwards since `shutdown_smi()` hadn't been registered yet. Fix it by adding a `kfree()` in the error handling path in `try_smi_init()`. Cc: stable(a)vger.kernel.org # 4.19+ Fixes: 7960f18a5647 ("ipmi_si: Convert over to a shutdown handler") Signed-off-by: Yi Yang <yiyang13(a)huawei.com> Co-developed-by: GONG, Ruiqi <gongruiqi(a)huaweicloud.com> Signed-off-by: GONG, Ruiqi <gongruiqi(a)huaweicloud.com> Message-Id: <20230629123328.2402075-1-gongruiqi(a)huaweicloud.com> Signed-off-by: Corey Minyard <minyard(a)acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/char/ipmi/ipmi_si_intf.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 9e3e24c43168..227eb9e8e47d 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -2089,6 +2089,11 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->io.io_cleanup = NULL; } + if (rv && new_smi->si_sm) { + kfree(new_smi->si_sm); + new_smi->si_sm = NULL; + } + return rv; } -- 2.25.1

2 1

[PATCH OLK-6.6 0/1] Added SM3 as module signing algorithm
by GUO Zihua 28 Nov '23

28 Nov '23

This patch adds SM3 as one of the module signing algorithm. GUO Zihua (1): keys: Allow automatic module signature with SM3 kernel/module/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) -- 2.34.1

2 2

[PATCH openEuler-1.0-LTS v2] x86/mce/amd: Publish the bank pointer only after setup has succeeded
by liwei 28 Nov '23

28 Nov '23

From: Borislav Petkov <bp(a)suse.de> mainline inclusion from mainline-v5.6-rc3 commit 6e5cf31fbe651bed7ba1df768f2e123531132417 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8JXM2 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- threshold_create_bank() creates a bank descriptor per MCA error thresholding counter which can be controlled over sysfs. It publishes the pointer to that bank in a per-CPU variable and then goes on to create additional thresholding blocks if the bank has such. However, that creation of additional blocks in allocate_threshold_blocks() can fail, leading to a use-after-free through the per-CPU pointer. Therefore, publish that pointer only after all blocks have been setup successfully. Fixes: 019f34fccfd5 ("x86, MCE, AMD: Move shared bank to node descriptor") Reported-by: Saar Amar <Saar.Amar(a)microsoft.com> Reported-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Borislav Petkov <bp(a)suse.de> Cc: <stable(a)vger.kernel.org> Link: http://lkml.kernel.org/r/20200128140846.phctkvx5btiexvbx@kili.mountain Signed-off-by: liwei <liwei728(a)huawei.com> --- arch/x86/kernel/cpu/mce/amd.c | 33 ++++++++++++++++----------------- 1 file changed, 16 insertions(+), 17 deletions(-) diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c index 38b18fa055ef..af4a83695970 100644 --- a/arch/x86/kernel/cpu/mce/amd.c +++ b/arch/x86/kernel/cpu/mce/amd.c @@ -1200,8 +1200,9 @@ static const char *get_name(unsigned int bank, struct threshold_block *b) return buf_mcatype; } -static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank, - unsigned int block, u32 address) +static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb, + unsigned int bank, unsigned int block, + u32 address) { struct threshold_block *b = NULL; u32 low, high; @@ -1245,16 +1246,12 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank, INIT_LIST_HEAD(&b->miscj); - if (per_cpu(threshold_banks, cpu)[bank]->blocks) { - list_add(&b->miscj, - &per_cpu(threshold_banks, cpu)[bank]->blocks->miscj); - } else { - per_cpu(threshold_banks, cpu)[bank]->blocks = b; - } + if (tb->blocks) + list_add(&b->miscj, &tb->blocks->miscj); + else + tb->blocks = b; - err = kobject_init_and_add(&b->kobj, &threshold_ktype, - per_cpu(threshold_banks, cpu)[bank]->kobj, - get_name(bank, b)); + err = kobject_init_and_add(&b->kobj, &threshold_ktype, tb->kobj, get_name(bank, b)); if (err) goto out_free; recurse: @@ -1262,7 +1259,7 @@ static int allocate_threshold_blocks(unsigned int cpu, unsigned int bank, if (!address) return 0; - err = allocate_threshold_blocks(cpu, bank, block, address); + err = allocate_threshold_blocks(cpu, tb, bank, block, address); if (err) goto out_free; @@ -1347,8 +1344,6 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank) goto out_free; } - per_cpu(threshold_banks, cpu)[bank] = b; - if (is_shared_bank(bank)) { refcount_set(&b->cpus, 1); @@ -1359,9 +1354,13 @@ static int threshold_create_bank(unsigned int cpu, unsigned int bank) } } - err = allocate_threshold_blocks(cpu, bank, 0, msr_ops.misc(bank)); - if (!err) - goto out; + err = allocate_threshold_blocks(cpu, b, bank, 0, msr_ops.misc(bank)); + if (err) + goto out_free; + + per_cpu(threshold_banks, cpu)[bank] = b; + + return 0; out_free: kfree(b); -- 2.25.1

2 3

[PATCH OLK-5.10 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 28 Nov '23

28 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 690 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 872 insertions(+), 171 deletions(-) -- 2.34.1

2 21

[PATCH OLK-6.6 V2 00/12] Add SDEI Watchdog Support
by Xiongfeng Wang 28 Nov '23

28 Nov '23

Xiongfeng Wang (12): firmware: arm_sdei: add interrupt binding api firmware: arm_sdei: make 'sdei_api_event_disable/enable' public lockup_detector: init lockup detector after all the init_calls watchdog: add nmi_watchdog support for arm64 based on SDEI sdei_watchdog: clear EOI of the secure timer before kdump sdei_watchdog: set secure timer period base on 'watchdog_thresh' sdei_watchdog: avoid possible false hardlockup init: only move down lockup_detector_init() when sdei_watchdog is enabled kprobes/arm64: Blacklist sdei watchdog callback functions openeuler_defconfig: Enable SDEI Watchdog stop_machine: mask sdei before running the callback arm64: kexec: only clear EOI for SDEI in NMI context arch/arm64/configs/openeuler_defconfig | 3 +- arch/arm64/kernel/Makefile | 1 + arch/arm64/kernel/machine_kexec.c | 11 ++ arch/arm64/kernel/watchdog_sdei.c | 151 +++++++++++++++++++++++++ drivers/firmware/arm_sdei.c | 26 ++++- include/linux/arm_sdei.h | 5 + include/linux/nmi.h | 8 ++ include/uapi/linux/arm_sdei.h | 2 + init/main.c | 7 +- kernel/stop_machine.c | 10 ++ kernel/watchdog.c | 3 + lib/Kconfig.debug | 9 ++ 12 files changed, 232 insertions(+), 4 deletions(-) create mode 100644 arch/arm64/kernel/watchdog_sdei.c -- 2.20.1

2 13

[PATCH OLK-5.10 v3 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 28 Nov '23

28 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

1 20

[PATCH OLK-5.10 v3 00/20] psi irq in cgroupv1 and psi fine grained
by Lu Jialin 27 Nov '23

27 Nov '23

Chen Wandun (3): mm: disable psi cgroup v1 by default mm: add config isolation for psi under cgroup v1 psi: dont alloc memory for psi by default Chengming Zhou (3): sched/psi: Fix periodic aggregation shut off sched/psi: Optimize task switch inside shared cgroups again sched/psi: Add PSI_IRQ to track IRQ/SOFTIRQ pressure Hao Jia (1): sched/psi: Zero the memory of struct psi_group Johannes Weiner (1): sched/psi: Remove NR_ONCPU task accounting Lu Jialin (11): psi: support irq.pressure under cgroup v1 psi: enable CONFIG_PSI_CGROUP_V1 in openeuler_defconfig psi: update psi irqtime when the irq delta is nozero memcg: split async memcg reclaim from reclaim_high psi: add struct psi_group_ext PSI: Introduce fine grained stall time collect for cgroup reclaim PSI: Introduce avgs and total calculation for cgroup reclaim PSI: Introduce pressure.stat in psi PSI: add more memory fine grained stall tracking in pressure.stat add cpu fine grained stall tracking in pressure.stat PSI: enable CONFIG_PSI_FINE_GRAINED in openeuler_defconfig Suren Baghdasaryan (1): psi: Fix "defined but not used" warnings when CONFIG_PROC_FS=n Documentation/admin-guide/cgroup-v2.rst | 6 + arch/arm64/configs/openeuler_defconfig | 2 + arch/x86/configs/openeuler_defconfig | 2 + block/blk-cgroup.c | 2 +- block/blk-core.c | 2 +- include/linux/cgroup-defs.h | 6 +- include/linux/cgroup.h | 2 +- include/linux/psi.h | 9 +- include/linux/psi_types.h | 99 +++- include/linux/sched.h | 4 + init/Kconfig | 20 + kernel/cgroup/cgroup.c | 64 ++- kernel/sched/core.c | 2 + kernel/sched/cpuacct.c | 6 +- kernel/sched/fair.c | 6 - kernel/sched/psi.c | 691 ++++++++++++++++++++---- kernel/sched/stats.h | 9 + mm/compaction.c | 2 +- mm/filemap.c | 4 +- mm/memcontrol.c | 92 ++-- mm/page_alloc.c | 6 + mm/page_io.c | 3 + mm/vmscan.c | 5 +- 23 files changed, 873 insertions(+), 171 deletions(-) -- 2.34.1

1 20

2024

2023

2022

2021

2020

2019

Kernel