- Kernel - mailweb.openeuler.org

[OLK-5.10 v3] RDMA/hns: Support getting xrcd num from firmware
by Chengchang Tang 24 Apr '23

24 Apr '23

From: Luoyouming <luoyouming(a)huawei.com> driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I6WAZI --------------------------------------------------------------- Support driver gets the num_xrcds and reserved_xrcds from firmware. Signed-off-by: Luoyouming <luoyouming(a)huawei.com> Signed-off-by: Chengchang Tang <tangchengchang(a)huawei.com> Reviewed-by: Chengchang Tang <tangchengchang(a)huawei.com> --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 5 ++--- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 4 ++-- 2 files changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 36397517e679..042e19fa4039 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -2310,9 +2310,6 @@ static void apply_func_caps(struct hns_roce_dev *hr_dev) caps->qpc_timer_hop_num = HNS_ROCE_HOP_NUM_0; caps->cqc_timer_hop_num = HNS_ROCE_HOP_NUM_0; - caps->num_xrcds = HNS_ROCE_V2_MAX_XRCD_NUM; - caps->reserved_xrcds = HNS_ROCE_V2_RSV_XRCD_NUM; - caps->num_mtt_segs = HNS_ROCE_V2_MAX_MTT_SEGS; caps->num_srqwqe_segs = HNS_ROCE_V2_MAX_SRQWQE_SEGS; caps->num_idx_segs = HNS_ROCE_V2_MAX_IDX_SEGS; @@ -2440,6 +2437,7 @@ static int hns_roce_query_caps(struct hns_roce_dev *hr_dev) caps->num_cqs = 1 << hr_reg_read(resp_c, PF_CAPS_C_NUM_CQS); caps->gid_table_len[0] = hr_reg_read(resp_c, PF_CAPS_C_MAX_GID); caps->max_cqes = 1 << hr_reg_read(resp_c, PF_CAPS_C_CQ_DEPTH); + caps->num_xrcds = 1 << hr_reg_read(resp_c, PF_CAPS_C_NUM_XRCDS); caps->num_mtpts = 1 << hr_reg_read(resp_c, PF_CAPS_C_NUM_MRWS); caps->num_qps = 1 << hr_reg_read(resp_c, PF_CAPS_C_NUM_QPS); caps->max_qp_init_rdma = hr_reg_read(resp_c, PF_CAPS_C_MAX_ORD); @@ -2461,6 +2459,7 @@ static int hns_roce_query_caps(struct hns_roce_dev *hr_dev) caps->reserved_mrws = hr_reg_read(resp_e, PF_CAPS_E_RSV_MRWS); caps->chunk_sz = 1 << hr_reg_read(resp_e, PF_CAPS_E_CHUNK_SIZE_SHIFT); caps->reserved_cqs = hr_reg_read(resp_e, PF_CAPS_E_RSV_CQS); + caps->reserved_xrcds = hr_reg_read(resp_e, PF_CAPS_E_RSV_XRCDS); caps->reserved_srqs = hr_reg_read(resp_e, PF_CAPS_E_RSV_SRQS); caps->reserved_lkey = hr_reg_read(resp_e, PF_CAPS_E_RSV_LKEYS); diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h index 1605a093dae8..6223cc66f065 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h @@ -42,8 +42,6 @@ #define HNS_ROCE_V2_MAX_MTT_SEGS 0x1000000 #define HNS_ROCE_V2_MAX_SRQWQE_SEGS 0x1000000 #define HNS_ROCE_V2_MAX_IDX_SEGS 0x1000000 -#define HNS_ROCE_V2_MAX_XRCD_NUM 0x1000000 -#define HNS_ROCE_V2_RSV_XRCD_NUM 0 #define HNS_ROCE_V3_SCCC_SZ 64 #define HNS_ROCE_V3_GMV_ENTRY_SZ 32 @@ -1214,6 +1212,7 @@ struct hns_roce_query_pf_caps_c { #define PF_CAPS_C_NUM_CQS PF_CAPS_C_FIELD_LOC(51, 32) #define PF_CAPS_C_MAX_GID PF_CAPS_C_FIELD_LOC(60, 52) #define PF_CAPS_C_CQ_DEPTH PF_CAPS_C_FIELD_LOC(86, 64) +#define PF_CAPS_C_NUM_XRCDS PF_CAPS_C_FIELD_LOC(91, 87) #define PF_CAPS_C_NUM_MRWS PF_CAPS_C_FIELD_LOC(115, 96) #define PF_CAPS_C_NUM_QPS PF_CAPS_C_FIELD_LOC(147, 128) #define PF_CAPS_C_MAX_ORD PF_CAPS_C_FIELD_LOC(155, 148) @@ -1273,6 +1272,7 @@ struct hns_roce_query_pf_caps_e { #define PF_CAPS_E_RSV_MRWS PF_CAPS_E_FIELD_LOC(19, 0) #define PF_CAPS_E_CHUNK_SIZE_SHIFT PF_CAPS_E_FIELD_LOC(31, 20) #define PF_CAPS_E_RSV_CQS PF_CAPS_E_FIELD_LOC(51, 32) +#define PF_CAPS_E_RSV_XRCDS PF_CAPS_E_FIELD_LOC(63, 52) #define PF_CAPS_E_RSV_SRQS PF_CAPS_E_FIELD_LOC(83, 64) #define PF_CAPS_E_RSV_LKEYS PF_CAPS_E_FIELD_LOC(115, 96) -- 2.30.0

1 0

[PATCH openEuler-1.0-LTS] i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
by Yongqiang Liu 23 Apr '23

23 Apr '23

From: Wei Chen <harperchen1110(a)gmail.com> mainline inclusion from mainline-v6.3-rc4 commit 92fbb6d1296f81f41f65effd7f5f8c0f74943d15 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6XHPL CVE: CVE-2023-2194 -------------------------------- The data->block[0] variable comes from user and is a number between 0-255. Without proper check, the variable may be very large to cause an out-of-bounds when performing memcpy in slimpro_i2c_blkwr. Fix this bug by checking the value of writelen. Fixes: f6505fbabc42 ("i2c: add SLIMpro I2C device driver on APM X-Gene platform") Signed-off-by: Wei Chen <harperchen1110(a)gmail.com> Cc: stable(a)vger.kernel.org Reviewed-by: Andi Shyti <andi.shyti(a)kernel.org> Signed-off-by: Wolfram Sang <wsa(a)kernel.org> Signed-off-by: Yang Jihong <yangjihong1(a)huawei.com> Reviewed-by: Xu Kuohai <xukuohai(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/i2c/busses/i2c-xgene-slimpro.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c index a7ac746018ad..7a746f413535 100644 --- a/drivers/i2c/busses/i2c-xgene-slimpro.c +++ b/drivers/i2c/busses/i2c-xgene-slimpro.c @@ -321,6 +321,9 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip, u32 msg[3]; int rc; + if (writelen > I2C_SMBUS_BLOCK_MAX) + return -EINVAL; + memcpy(ctx->dma_buffer, data, writelen); paddr = dma_map_single(ctx->dev, ctx->dma_buffer, writelen, DMA_TO_DEVICE); -- 2.25.1

1 0

[openEuler-22.03-LTS] rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]
by Wang Yufen 23 Apr '23

23 Apr '23

From: David Howells <dhowells(a)redhat.com> stable inclusion from stable-v5.10.157 commit 3535c632e6d16c98f76e615da8dc0cb2750c66cc category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6VK2H CVE: CVE-2023-2006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 3bcd6c7eaa53b56c3f584da46a1f7652e759d0e5 ] After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures(a)trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells(a)redhat.com> Tested-by: zdi-disclosures(a)trendmicro.com cc: Marc Dionne <marc.dionne(a)auristor.com> cc: linux-afs(a)lists.infradead.org Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/rxrpc/ar-internal.h net/rxrpc/conn_client.c Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/conn_client.c | 36 ++++++++++++++++++++++-------------- 2 files changed, 23 insertions(+), 14 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index ccb6541..90ab125 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -392,6 +392,7 @@ enum rxrpc_conn_proto_state { struct rxrpc_bundle { struct rxrpc_conn_parameters params; atomic_t usage; + atomic_t active; /* Number of active users */ unsigned int debug_id; bool try_upgrade; /* True if the bundle is attempting upgrade */ bool alloc_conn; /* True if someone's getting a conn */ diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c index f5fb223..34430cc 100644 --- a/net/rxrpc/conn_client.c +++ b/net/rxrpc/conn_client.c @@ -40,6 +40,8 @@ DEFINE_IDR(rxrpc_client_conn_ids); static DEFINE_SPINLOCK(rxrpc_conn_id_lock); +static void rxrpc_deactivate_bundle(struct rxrpc_bundle *bundle); + /* * Get a connection ID and epoch for a client connection from the global pool. * The connection struct pointer is then recorded in the idr radix tree. The @@ -123,6 +125,7 @@ static struct rxrpc_bundle *rxrpc_alloc_bundle(struct rxrpc_conn_parameters *cp, bundle->params = *cp; rxrpc_get_peer(bundle->params.peer); atomic_set(&bundle->usage, 1); + atomic_set(&bundle->active, 1); spin_lock_init(&bundle->channel_lock); INIT_LIST_HEAD(&bundle->waiting_calls); } @@ -341,6 +344,7 @@ static struct rxrpc_bundle *rxrpc_look_up_bundle(struct rxrpc_conn_parameters *c rxrpc_free_bundle(candidate); found_bundle: rxrpc_get_bundle(bundle); + atomic_inc(&bundle->active); spin_unlock(&local->client_bundles_lock); _leave(" = %u [found]", bundle->debug_id); return bundle; @@ -438,6 +442,7 @@ static void rxrpc_add_conn_to_bundle(struct rxrpc_bundle *bundle, gfp_t gfp) if (old) trace_rxrpc_client(old, -1, rxrpc_client_replace); candidate->bundle_shift = shift; + atomic_inc(&bundle->active); bundle->conns[i] = candidate; for (j = 0; j < RXRPC_MAXCALLS; j++) set_bit(shift + j, &bundle->avail_chans); @@ -728,6 +733,7 @@ int rxrpc_connect_call(struct rxrpc_sock *rx, smp_rmb(); out_put_bundle: + rxrpc_deactivate_bundle(bundle); rxrpc_put_bundle(bundle); out: _leave(" = %d", ret); @@ -903,9 +909,8 @@ void rxrpc_disconnect_client_call(struct rxrpc_bundle *bundle, struct rxrpc_call static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) { struct rxrpc_bundle *bundle = conn->bundle; - struct rxrpc_local *local = bundle->params.local; unsigned int bindex; - bool need_drop = false, need_put = false; + bool need_drop = false; int i; _enter("C=%x", conn->debug_id); @@ -924,15 +929,22 @@ static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) } spin_unlock(&bundle->channel_lock); - /* If there are no more connections, remove the bundle */ - if (!bundle->avail_chans) { - _debug("maybe unbundle"); - spin_lock(&local->client_bundles_lock); + if (need_drop) { + rxrpc_deactivate_bundle(bundle); + rxrpc_put_connection(conn); + } +} - for (i = 0; i < ARRAY_SIZE(bundle->conns); i++) - if (bundle->conns[i]) - break; - if (i == ARRAY_SIZE(bundle->conns) && !bundle->params.exclusive) { +/* + * Drop the active count on a bundle. + */ +static void rxrpc_deactivate_bundle(struct rxrpc_bundle *bundle) +{ + struct rxrpc_local *local = bundle->params.local; + bool need_put = false; + + if (atomic_dec_and_lock(&bundle->active, &local->client_bundles_lock)) { + if (!bundle->params.exclusive) { _debug("erase bundle"); rb_erase(&bundle->local_node, &local->client_bundles); need_put = true; @@ -942,10 +954,6 @@ static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) if (need_put) rxrpc_put_bundle(bundle); } - - if (need_drop) - rxrpc_put_connection(conn); - _leave(""); } /* -- 1.8.3.1

1 0

[OLK-5.10] rxrpc: Fix race between conn bundle lookup and bundle removal [ZDI-CAN-15975]
by Wang Yufen 23 Apr '23

23 Apr '23

From: David Howells <dhowells(a)redhat.com> stable inclusion from stable-v5.10.157 commit 3535c632e6d16c98f76e615da8dc0cb2750c66cc category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6VK2H CVE: CVE-2023-2006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 3bcd6c7eaa53b56c3f584da46a1f7652e759d0e5 ] After rxrpc_unbundle_conn() has removed a connection from a bundle, it checks to see if there are any conns with available channels and, if not, removes and attempts to destroy the bundle. Whilst it does check after grabbing client_bundles_lock that there are no connections attached, this races with rxrpc_look_up_bundle() retrieving the bundle, but not attaching a connection for the connection to be attached later. There is therefore a window in which the bundle can get destroyed before we manage to attach a new connection to it. Fix this by adding an "active" counter to struct rxrpc_bundle: (1) rxrpc_connect_call() obtains an active count by prepping/looking up a bundle and ditches it before returning. (2) If, during rxrpc_connect_call(), a connection is added to the bundle, this obtains an active count, which is held until the connection is discarded. (3) rxrpc_deactivate_bundle() is created to drop an active count on a bundle and destroy it when the active count reaches 0. The active count is checked inside client_bundles_lock() to prevent a race with rxrpc_look_up_bundle(). (4) rxrpc_unbundle_conn() then calls rxrpc_deactivate_bundle(). Fixes: 245500d853e9 ("rxrpc: Rewrite the client connection manager") Reported-by: zdi-disclosures(a)trendmicro.com # ZDI-CAN-15975 Signed-off-by: David Howells <dhowells(a)redhat.com> Tested-by: zdi-disclosures(a)trendmicro.com cc: Marc Dionne <marc.dionne(a)auristor.com> cc: linux-afs(a)lists.infradead.org Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/rxrpc/ar-internal.h net/rxrpc/conn_client.c Signed-off-by: Wang Yufen <wangyufen(a)huawei.com> --- net/rxrpc/ar-internal.h | 1 + net/rxrpc/conn_client.c | 36 ++++++++++++++++++++++-------------- 2 files changed, 23 insertions(+), 14 deletions(-) diff --git a/net/rxrpc/ar-internal.h b/net/rxrpc/ar-internal.h index ccb6541..90ab125 100644 --- a/net/rxrpc/ar-internal.h +++ b/net/rxrpc/ar-internal.h @@ -392,6 +392,7 @@ enum rxrpc_conn_proto_state { struct rxrpc_bundle { struct rxrpc_conn_parameters params; atomic_t usage; + atomic_t active; /* Number of active users */ unsigned int debug_id; bool try_upgrade; /* True if the bundle is attempting upgrade */ bool alloc_conn; /* True if someone's getting a conn */ diff --git a/net/rxrpc/conn_client.c b/net/rxrpc/conn_client.c index f5fb223..34430cc 100644 --- a/net/rxrpc/conn_client.c +++ b/net/rxrpc/conn_client.c @@ -40,6 +40,8 @@ DEFINE_IDR(rxrpc_client_conn_ids); static DEFINE_SPINLOCK(rxrpc_conn_id_lock); +static void rxrpc_deactivate_bundle(struct rxrpc_bundle *bundle); + /* * Get a connection ID and epoch for a client connection from the global pool. * The connection struct pointer is then recorded in the idr radix tree. The @@ -123,6 +125,7 @@ static struct rxrpc_bundle *rxrpc_alloc_bundle(struct rxrpc_conn_parameters *cp, bundle->params = *cp; rxrpc_get_peer(bundle->params.peer); atomic_set(&bundle->usage, 1); + atomic_set(&bundle->active, 1); spin_lock_init(&bundle->channel_lock); INIT_LIST_HEAD(&bundle->waiting_calls); } @@ -341,6 +344,7 @@ static struct rxrpc_bundle *rxrpc_look_up_bundle(struct rxrpc_conn_parameters *c rxrpc_free_bundle(candidate); found_bundle: rxrpc_get_bundle(bundle); + atomic_inc(&bundle->active); spin_unlock(&local->client_bundles_lock); _leave(" = %u [found]", bundle->debug_id); return bundle; @@ -438,6 +442,7 @@ static void rxrpc_add_conn_to_bundle(struct rxrpc_bundle *bundle, gfp_t gfp) if (old) trace_rxrpc_client(old, -1, rxrpc_client_replace); candidate->bundle_shift = shift; + atomic_inc(&bundle->active); bundle->conns[i] = candidate; for (j = 0; j < RXRPC_MAXCALLS; j++) set_bit(shift + j, &bundle->avail_chans); @@ -728,6 +733,7 @@ int rxrpc_connect_call(struct rxrpc_sock *rx, smp_rmb(); out_put_bundle: + rxrpc_deactivate_bundle(bundle); rxrpc_put_bundle(bundle); out: _leave(" = %d", ret); @@ -903,9 +909,8 @@ void rxrpc_disconnect_client_call(struct rxrpc_bundle *bundle, struct rxrpc_call static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) { struct rxrpc_bundle *bundle = conn->bundle; - struct rxrpc_local *local = bundle->params.local; unsigned int bindex; - bool need_drop = false, need_put = false; + bool need_drop = false; int i; _enter("C=%x", conn->debug_id); @@ -924,15 +929,22 @@ static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) } spin_unlock(&bundle->channel_lock); - /* If there are no more connections, remove the bundle */ - if (!bundle->avail_chans) { - _debug("maybe unbundle"); - spin_lock(&local->client_bundles_lock); + if (need_drop) { + rxrpc_deactivate_bundle(bundle); + rxrpc_put_connection(conn); + } +} - for (i = 0; i < ARRAY_SIZE(bundle->conns); i++) - if (bundle->conns[i]) - break; - if (i == ARRAY_SIZE(bundle->conns) && !bundle->params.exclusive) { +/* + * Drop the active count on a bundle. + */ +static void rxrpc_deactivate_bundle(struct rxrpc_bundle *bundle) +{ + struct rxrpc_local *local = bundle->params.local; + bool need_put = false; + + if (atomic_dec_and_lock(&bundle->active, &local->client_bundles_lock)) { + if (!bundle->params.exclusive) { _debug("erase bundle"); rb_erase(&bundle->local_node, &local->client_bundles); need_put = true; @@ -942,10 +954,6 @@ static void rxrpc_unbundle_conn(struct rxrpc_connection *conn) if (need_put) rxrpc_put_bundle(bundle); } - - if (need_drop) - rxrpc_put_connection(conn); - _leave(""); } /* -- 1.8.3.1

1 0

[PATCH OLK-5.10 v2] KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails
by 任敏敏(联通集团联通数字科技有限公司本部) 23 Apr '23

23 Apr '23

From: Sean Christopherson <seanjc(a)google.com> stable inclusion from stable-v5.10.163 commit 43dd254853aa274d356bb1d3ab01a8ca880b07b0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6XQ34 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 9cc409325ddd776f6fd6293d5ce93ce1248af6e4 upstream Inject #GP for if VMXON is attempting with a CR0/CR4 that fails the generic "is CRx valid" check, but passes the CR4.VMXE check, and do the generic checks _after_ handling the post-VMXON VM-Fail. The CR4.VMXE check, and all other #UD cases, are special pre-conditions that are enforced prior to pivoting on the current VMX mode, i.e. occur before interception if VMXON is attempted in VMX non-root mode. All other CR0/CR4 checks generate #GP and effectively have lower priority than the post-VMXON check. Per the SDM: IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ... THEN #UD; ELSIF not in VMX operation THEN IF (CPL > 0) or (in A20M mode) or (the values of CR0 and CR4 are not supported in VMX operation) THEN #GP(0); ELSIF in VMX non-root operation THEN VMexit; ELSIF CPL > 0 THEN #GP(0); ELSE VMfail("VMXON executed in VMX root operation"); FI; which, if re-written without ELSIF, yields: IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ... THEN #UD IF in VMX non-root operation THEN VMexit; IF CPL > 0 THEN #GP(0) IF in VMX operation THEN VMfail("VMXON executed in VMX root operation"); IF (in A20M mode) or (the values of CR0 and CR4 are not supported in VMX operation) THEN #GP(0); Note, KVM unconditionally forwards VMXON VM-Exits that occur in L2 to L1, i.e. there is no need to check the vCPU is not in VMX non-root mode. Add a comment to explain why unconditionally forwarding such exits is functionally correct. Reported-by: Eric Li <ercli(a)ucdavis.edu> Fixes: c7d855c2aff2 ("KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4") Cc: stable(a)vger.kernel.org Signed-off-by: Sean Christopherson <seanjc(a)google.com> Link: https://lore.kernel.org/r/20221006001956.329314-1-seanjc@google.com Signed-off-by: rminmin <renmm6(a)chinaunicom.cn> --- arch/x86/kvm/vmx/nested.c | 44 +++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 9003b14d72ca..40225b770942 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4899,24 +4899,35 @@ static int handle_vmon(struct kvm_vcpu *vcpu) | FEAT_CTL_VMX_ENABLED_OUTSIDE_SMX; /* - * Note, KVM cannot rely on hardware to perform the CR0/CR4 #UD checks - * that have higher priority than VM-Exit (see Intel SDM's pseudocode - * for VMXON), as KVM must load valid CR0/CR4 values into hardware while - * running the guest, i.e. KVM needs to check the _guest_ values. + * Manually check CR4.VMXE checks, KVM must force CR4.VMXE=1 to enter + * the guest and so cannot rely on hardware to perform the check, + * which has higher priority than VM-Exit (see Intel SDM's pseudocode + * for VMXON). * - * Rely on hardware for the other two pre-VM-Exit checks, !VM86 and - * !COMPATIBILITY modes. KVM may run the guest in VM86 to emulate Real - * Mode, but KVM will never take the guest out of those modes. + * Rely on hardware for the other pre-VM-Exit checks, CR0.PE=1, !VM86 + * and !COMPATIBILITY modes. For an unrestricted guest, KVM doesn't + * force any of the relevant guest state. For a restricted guest, KVM + * does force CR0.PE=1, but only to also force VM86 in order to emulate + * Real Mode, and so there's no need to check CR0.PE manually. */ - if (!nested_host_cr0_valid(vcpu, kvm_read_cr0(vcpu)) || - !nested_host_cr4_valid(vcpu, kvm_read_cr4(vcpu))) { + if (!kvm_read_cr4_bits(vcpu, X86_CR4_VMXE)) { kvm_queue_exception(vcpu, UD_VECTOR); return 1; } /* - * CPL=0 and all other checks that are lower priority than VM-Exit must - * be checked manually. + * The CPL is checked for "not in VMX operation" and for "in VMX root", + * and has higher priority than the VM-Fail due to being post-VMXON, + * i.e. VMXON #GPs outside of VMX non-root if CPL!=0. In VMX non-root, + * VMXON causes VM-Exit and KVM unconditionally forwards VMXON VM-Exits + * from L2 to L1, i.e. there's no need to check for the vCPU being in + * VMX non-root. + * + * Forwarding the VM-Exit unconditionally, i.e. without performing the + * #UD checks (see above), is functionally ok because KVM doesn't allow + * L1 to run L2 without CR4.VMXE=0, and because KVM never modifies L2's + * CR0 or CR4, i.e. it's L2's responsibility to emulate #UDs that are + * missed by hardware due to shadowing CR0 and/or CR4. */ if (vmx_get_cpl(vcpu)) { kvm_inject_gp(vcpu, 0); @@ -4926,6 +4937,17 @@ static int handle_vmon(struct kvm_vcpu *vcpu) if (vmx->nested.vmxon) return nested_vmx_fail(vcpu, VMXERR_VMXON_IN_VMX_ROOT_OPERATION); + /* + * Invalid CR0/CR4 generates #GP. These checks are performed if and + * only if the vCPU isn't already in VMX operation, i.e. effectively + * have lower priority than the VM-Fail above. + */ + if (!nested_host_cr0_valid(vcpu, kvm_read_cr0(vcpu)) || + !nested_host_cr4_valid(vcpu, kvm_read_cr4(vcpu))) { + kvm_inject_gp(vcpu, 0); + return 1; + } + if ((vmx->msr_ia32_feature_control & VMXON_NEEDED_FEATURES) != VMXON_NEEDED_FEATURES) { kvm_inject_gp(vcpu, 0); -- 2.33.0 Èç¹ûÄúŽíÎóœÓÊÕÁËžÃÓÊŒþ£¬ÇëÍš¹ýµç×ÓÓÊŒþÁ¢ŒŽÍšÖªÎÒÃÇ¡£Çë»ØžŽÓÊŒþµœ hqs-spmc@chinaunicom.cn£¬ŒŽ¿ÉÒÔÍË¶©ŽËÓÊŒþ¡£ÎÒÃÇœ«Á¢ŒŽœ«ÄúµÄÐÅÏ¢ŽÓÎÒÃÇµÄ·¢ËÍÄ¿ÂŒÖÐÉŸ³ý¡£ If you have received this email in error please notify us immediately by e-mail. Please reply to hqs-spmc(a)chinaunicom.cn ,you can unsubscribe from this mail. We will immediately remove your information from send catalogue of our.

1 0

[PATCH OLK-5.10] KVM: nVMX: Inject #GP, not #UD, if "generic" VMXON CR0/CR4 check fails
by 任敏敏(联通集团联通数字科技有限公司本部) 23 Apr '23

23 Apr '23

From: Sean Christopherson <seanjc(a)google.com> stable inclusion from stable-v6.2 commit 9cc409325ddd776f6fd6293d5ce93ce1248af6e4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6XQ34 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 9cc409325ddd776f6fd6293d5ce93ce1248af6e4 upstream Inject #GP for if VMXON is attempting with a CR0/CR4 that fails the generic "is CRx valid" check, but passes the CR4.VMXE check, and do the generic checks _after_ handling the post-VMXON VM-Fail. The CR4.VMXE check, and all other #UD cases, are special pre-conditions that are enforced prior to pivoting on the current VMX mode, i.e. occur before interception if VMXON is attempted in VMX non-root mode. All other CR0/CR4 checks generate #GP and effectively have lower priority than the post-VMXON check. Per the SDM: IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ... THEN #UD; ELSIF not in VMX operation THEN IF (CPL > 0) or (in A20M mode) or (the values of CR0 and CR4 are not supported in VMX operation) THEN #GP(0); ELSIF in VMX non-root operation THEN VMexit; ELSIF CPL > 0 THEN #GP(0); ELSE VMfail("VMXON executed in VMX root operation"); FI; which, if re-written without ELSIF, yields: IF (register operand) or (CR0.PE = 0) or (CR4.VMXE = 0) or ... THEN #UD IF in VMX non-root operation THEN VMexit; IF CPL > 0 THEN #GP(0) IF in VMX operation THEN VMfail("VMXON executed in VMX root operation"); IF (in A20M mode) or (the values of CR0 and CR4 are not supported in VMX operation) THEN #GP(0); Note, KVM unconditionally forwards VMXON VM-Exits that occur in L2 to L1, i.e. there is no need to check the vCPU is not in VMX non-root mode. Add a comment to explain why unconditionally forwarding such exits is functionally correct. Reported-by: Eric Li <ercli(a)ucdavis.edu> Fixes: c7d855c2aff2 ("KVM: nVMX: Inject #UD if VMXON is attempted with incompatible CR0/CR4") Cc: stable(a)vger.kernel.org Signed-off-by: Sean Christopherson <seanjc(a)google.com> Link: https://lore.kernel.org/r/20221006001956.329314-1-seanjc@google.com Signed-off-by: rminmin <renmm6(a)chinaunicom.cn> --- arch/x86/kvm/vmx/nested.c | 44 +++++++++++++++++++++++++++++---------- 1 file changed, 33 insertions(+), 11 deletions(-) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 9003b14d72ca..40225b770942 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4899,24 +4899,35 @@ static int handle_vmon(struct kvm_vcpu *vcpu) | FEAT_CTL_VMX_ENABLED_OUTSIDE_SMX; /* - * Note, KVM cannot rely on hardware to perform the CR0/CR4 #UD checks - * that have higher priority than VM-Exit (see Intel SDM's pseudocode - * for VMXON), as KVM must load valid CR0/CR4 values into hardware while - * running the guest, i.e. KVM needs to check the _guest_ values. + * Manually check CR4.VMXE checks, KVM must force CR4.VMXE=1 to enter + * the guest and so cannot rely on hardware to perform the check, + * which has higher priority than VM-Exit (see Intel SDM's pseudocode + * for VMXON). * - * Rely on hardware for the other two pre-VM-Exit checks, !VM86 and - * !COMPATIBILITY modes. KVM may run the guest in VM86 to emulate Real - * Mode, but KVM will never take the guest out of those modes. + * Rely on hardware for the other pre-VM-Exit checks, CR0.PE=1, !VM86 + * and !COMPATIBILITY modes. For an unrestricted guest, KVM doesn't + * force any of the relevant guest state. For a restricted guest, KVM + * does force CR0.PE=1, but only to also force VM86 in order to emulate + * Real Mode, and so there's no need to check CR0.PE manually. */ - if (!nested_host_cr0_valid(vcpu, kvm_read_cr0(vcpu)) || - !nested_host_cr4_valid(vcpu, kvm_read_cr4(vcpu))) { + if (!kvm_read_cr4_bits(vcpu, X86_CR4_VMXE)) { kvm_queue_exception(vcpu, UD_VECTOR); return 1; } /* - * CPL=0 and all other checks that are lower priority than VM-Exit must - * be checked manually. + * The CPL is checked for "not in VMX operation" and for "in VMX root", + * and has higher priority than the VM-Fail due to being post-VMXON, + * i.e. VMXON #GPs outside of VMX non-root if CPL!=0. In VMX non-root, + * VMXON causes VM-Exit and KVM unconditionally forwards VMXON VM-Exits + * from L2 to L1, i.e. there's no need to check for the vCPU being in + * VMX non-root. + * + * Forwarding the VM-Exit unconditionally, i.e. without performing the + * #UD checks (see above), is functionally ok because KVM doesn't allow + * L1 to run L2 without CR4.VMXE=0, and because KVM never modifies L2's + * CR0 or CR4, i.e. it's L2's responsibility to emulate #UDs that are + * missed by hardware due to shadowing CR0 and/or CR4. */ if (vmx_get_cpl(vcpu)) { kvm_inject_gp(vcpu, 0); @@ -4926,6 +4937,17 @@ static int handle_vmon(struct kvm_vcpu *vcpu) if (vmx->nested.vmxon) return nested_vmx_fail(vcpu, VMXERR_VMXON_IN_VMX_ROOT_OPERATION); + /* + * Invalid CR0/CR4 generates #GP. These checks are performed if and + * only if the vCPU isn't already in VMX operation, i.e. effectively + * have lower priority than the VM-Fail above. + */ + if (!nested_host_cr0_valid(vcpu, kvm_read_cr0(vcpu)) || + !nested_host_cr4_valid(vcpu, kvm_read_cr4(vcpu))) { + kvm_inject_gp(vcpu, 0); + return 1; + } + if ((vmx->msr_ia32_feature_control & VMXON_NEEDED_FEATURES) != VMXON_NEEDED_FEATURES) { kvm_inject_gp(vcpu, 0); -- 2.33.0 Èç¹ûÄúŽíÎóœÓÊÕÁËžÃÓÊŒþ£¬ÇëÍš¹ýµç×ÓÓÊŒþÁ¢ŒŽÍšÖªÎÒÃÇ¡£Çë»ØžŽÓÊŒþµœ hqs-spmc@chinaunicom.cn£¬ŒŽ¿ÉÒÔÍË¶©ŽËÓÊŒþ¡£ÎÒÃÇœ«Á¢ŒŽœ«ÄúµÄÐÅÏ¢ŽÓÎÒÃÇµÄ·¢ËÍÄ¿ÂŒÖÐÉŸ³ý¡£ If you have received this email in error please notify us immediately by e-mail. Please reply to hqs-spmc(a)chinaunicom.cn ,you can unsubscribe from this mail. We will immediately remove your information from send catalogue of our.

2 1

Re: [openEuler-22.03-LTS,v1,0/6] Add perf metricgroup support for HiSilicon hip08 platform
by patchwork bot 23 Apr '23

23 Apr '23

your patch has been converted to a pull request, pull request link is: https://gitee.com/openeuler/kernel/pulls/609

1 0

[PATCH openEuler-22.03-LTS v1 0/6] Add perf metricgroup support for HiSilicon hip08 platform
by Wei Li 23 Apr '23

23 Apr '23

Add perf metricgroup support for HiSilicon hip08 platform, tested on Huawei D06 board. John Garry (6): perf metricgroup: Make find_metric() public with name change perf test: Handle metric reuse in pmu-events parsing test perf pmu: Add pmu_events_map__find() function to find the common PMU map for the system perf vendor events arm64: Add Hisi hip08 L1 metrics perf vendor events arm64: Add Hisi hip08 L2 metrics perf vendor events arm64: Add Hisi hip08 L3 metrics tools/perf/arch/arm64/util/Build | 1 + tools/perf/arch/arm64/util/pmu.c | 25 ++ .../arch/arm64/hisilicon/hip08/metrics.json | 233 ++++++++++++++++++ tools/perf/tests/pmu-events.c | 83 ++++++- tools/perf/util/metricgroup.c | 11 +- tools/perf/util/metricgroup.h | 3 +- tools/perf/util/pmu.c | 5 + tools/perf/util/pmu.h | 1 + tools/perf/util/s390-sample-raw.c | 4 +- 9 files changed, 356 insertions(+), 10 deletions(-) create mode 100644 tools/perf/arch/arm64/util/pmu.c create mode 100644 tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json -- 2.25.1

1 6

[PATCH openEuler-1.0-LTS] audit: fix a memleak caused by auditing load module
by Yongqiang Liu 23 Apr '23

23 Apr '23

From: Li RongQing <lirongqing(a)baidu.com> mainline inclusion from mainline-v5.2-rc1 commit 95e0b46fcebd7dbf6850dee96046e4c4ddc7f69c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6X2LV CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- module.name will be allocated unconditionally when auditing load module, and audit_log_start() can fail with other reasons, or audit_log_exit maybe not called, caused module.name is not freed so free module.name in audit_free_context and __audit_syscall_exit unreferenced object 0xffff88af90837d20 (size 8): comm "modprobe", pid 1036, jiffies 4294704867 (age 3069.138s) hex dump (first 8 bytes): 69 78 67 62 65 00 ff ff ixgbe... backtrace: [<0000000008da28fe>] __audit_log_kern_module+0x33/0x80 [<00000000c1491e61>] load_module+0x64f/0x3850 [<000000007fc9ae3f>] __do_sys_init_module+0x218/0x250 [<0000000000d4a478>] do_syscall_64+0x117/0x400 [<000000004924ded8>] entry_SYSCALL_64_after_hwframe+0x49/0xbe [<000000007dc331dd>] 0xffffffffffffffff Fixes: ca86cad7380e3 ("audit: log module name on init_module") Signed-off-by: Zhang Yu <zhangyu31(a)baidu.com> Signed-off-by: Li RongQing <lirongqing(a)baidu.com> [PM: manual merge fixup in __audit_syscall_exit()] Signed-off-by: Paul Moore <paul(a)paul-moore.com> conflict: kernel/auditsc.c Signed-off-by: Yi Yang <yiyang13(a)huawei.com> Reviewed-by: cuigaosheng <cuigaosheng1(a)huawei.com> Reviewed-by: guozihua <guozihua(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- kernel/auditsc.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/kernel/auditsc.c b/kernel/auditsc.c index 1513873e23bd..57d30b75f7a2 100644 --- a/kernel/auditsc.c +++ b/kernel/auditsc.c @@ -881,6 +881,13 @@ static inline void audit_proctitle_free(struct audit_context *context) context->proctitle.len = 0; } +static inline void audit_free_module(struct audit_context *context) +{ + if (context->type == AUDIT_KERN_MODULE) { + kfree(context->module.name); + context->module.name = NULL; + } +} static inline void audit_free_names(struct audit_context *context) { struct audit_names *n, *next; @@ -964,6 +971,7 @@ int audit_alloc(struct task_struct *tsk) static inline void audit_free_context(struct audit_context *context) { + audit_free_module(context); audit_free_names(context); unroll_tree_refs(context, NULL, 0); free_tree_refs(context); @@ -1281,7 +1289,6 @@ static void show_special(struct audit_context *context, int *call_panic) audit_log_format(ab, "name="); if (context->module.name) { audit_log_untrustedstring(ab, context->module.name); - kfree(context->module.name); } else audit_log_format(ab, "(null)"); @@ -1583,6 +1590,7 @@ void __audit_syscall_exit(int success, long return_code) if (!list_empty(&context->killed_trees)) audit_kill_trees(&context->killed_trees); + audit_free_module(context); audit_free_names(context); unroll_tree_refs(context, NULL, 0); audit_free_aux(context); -- 2.25.1

1 0

[PATCH OLK-5.10 v1 0/6] Add perf metricgroup support for HiSilicon hip08 platform
by Wei Li 23 Apr '23

23 Apr '23

Add perf metricgroup support for HiSilicon hip08 platform, tested on Huawei D06 board. John Garry (6): perf metricgroup: Make find_metric() public with name change perf test: Handle metric reuse in pmu-events parsing test perf pmu: Add pmu_events_map__find() function to find the common PMU map for the system perf vendor events arm64: Add Hisi hip08 L1 metrics perf vendor events arm64: Add Hisi hip08 L2 metrics perf vendor events arm64: Add Hisi hip08 L3 metrics tools/perf/arch/arm64/util/Build | 1 + tools/perf/arch/arm64/util/pmu.c | 25 ++ .../arch/arm64/hisilicon/hip08/metrics.json | 233 ++++++++++++++++++ tools/perf/tests/pmu-events.c | 83 ++++++- tools/perf/util/metricgroup.c | 11 +- tools/perf/util/metricgroup.h | 3 +- tools/perf/util/pmu.c | 5 + tools/perf/util/pmu.h | 1 + tools/perf/util/s390-sample-raw.c | 4 +- 9 files changed, 356 insertions(+), 10 deletions(-) create mode 100644 tools/perf/arch/arm64/util/pmu.c create mode 100644 tools/perf/pmu-events/arch/arm64/hisilicon/hip08/metrics.json -- 2.25.1

2 7

Re: [PATCH v3] mm: oom: move memcg_print_bad_task() out of mem_cgroup_scan_tasks()
by Zheng Zengkai 22 Apr '23

22 Apr '23

在 2023/4/17 21:12, Kefeng Wang 写道: > + Zengkai > > Could you merge this patch? +zhangjialin Hi Kefeng and Kang Chen Is this patch same as the one in PR #582(https://gitee.com/openeuler/kernel/pulls/582) ? If so，let's tracking it via the gitee PR, Here are some notices about contribution to openEuler kernel: https://gitee.com/openeuler/kernel/issues/I6WKLA Thank you! > > On 2023/4/17 19:13, Kang Chen wrote: >> hulk inclusion >> category: bugfix >> bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 >> CVE: NA >> >> -------------------------------- >> >> raw call flow: >> >> oom_kill_process >> -> mem_cgroup_scan_tasks(.., .., message) >> -> memcg_print_bad_task(message, ..) >> >> message is "const char*" type, and incorrectly cast to >> "oom_control*" type in memcg_print_bad_task. > > a blank line, > >> Fix it by moving memcg_print_bad_task out of mem_cgroup_scan_tasks >> and call it in select_bad_process and dump_tasks. Furthermore, >> use struct oom_control* directly and remove the useless parm `ret`. >> > > Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> > >> Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> >> --- >> v3 -> v2: use type `struct oom_control *` directly and fix bugs >> v2 -> v1: remove parm `ret` and create a memcg_print_bad_task stub >> >> mm/memcontrol.c | 16 +++++++++------- >> mm/oom_kill.c | 14 ++++++++------ >> 2 files changed, 17 insertions(+), 13 deletions(-) >> >> diff --git a/mm/memcontrol.c b/mm/memcontrol.c >> index 635cb8b65b86..6b4f70d090d6 100644 >> --- a/mm/memcontrol.c >> +++ b/mm/memcontrol.c >> @@ -1214,9 +1214,6 @@ int mem_cgroup_scan_tasks(struct mem_cgroup >> *memcg, >> break; >> } >> } >> -#ifdef CONFIG_MEMCG_QOS >> - memcg_print_bad_task(arg, ret); >> -#endif >> return ret; >> } >> @@ -4004,14 +4001,12 @@ bool memcg_low_priority_scan_tasks(int >> (*fn)(struct task_struct *, void *), >> return oc->chosen ? true : false; >> } >> -void memcg_print_bad_task(void *arg, int ret) >> +void memcg_print_bad_task(struct oom_control *oc) >> { >> - struct oom_control *oc = arg; >> - >> if (!static_branch_likely(&memcg_qos_stat_key)) >> return; >> - if (!ret && oc->chosen) { >> + if (oc->chosen) { >> struct mem_cgroup *memcg; >> memcg = mem_cgroup_from_task(oc->chosen); >> @@ -4042,6 +4037,13 @@ int sysctl_memcg_qos_handler(struct ctl_table >> *table, int write, >> return ret; >> } >> + >> +#else >> + >> +void memcg_print_bad_task(struct oom_control *oc) >> +{ >> +} >> + >> #endif >> #ifdef CONFIG_NUMA >> diff --git a/mm/oom_kill.c b/mm/oom_kill.c >> index 0f77eb4c6644..9d595265bbf5 100644 >> --- a/mm/oom_kill.c >> +++ b/mm/oom_kill.c >> @@ -408,9 +408,10 @@ static void select_bad_process(struct >> oom_control *oc) >> { >> oc->chosen_points = LONG_MIN; >> - if (is_memcg_oom(oc)) >> - mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); >> - else { >> + if (is_memcg_oom(oc)) { >> + if (!mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc)) >> + memcg_print_bad_task(oc); >> + } else { >> struct task_struct *p; >> #ifdef CONFIG_MEMCG_QOS >> @@ -473,9 +474,10 @@ static void dump_tasks(struct oom_control *oc) >> pr_info("Tasks state (memory values in pages):\n"); >> pr_info("[ pid ] uid tgid total_vm rss pgtables_bytes >> swapents oom_score_adj name\n"); >> - if (is_memcg_oom(oc)) >> - mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); >> - else { >> + if (is_memcg_oom(oc)) { >> + if (!mem_cgroup_scan_tasks(oc->memcg, dump_task, oc)) >> + memcg_print_bad_task(oc); >> + } else { >> struct task_struct *p; >> rcu_read_lock(); > . >

3 2

[PATCH openEuler-1.0-LTS 0/6] efi: fix crash due to EFI runtime service page faults
by Ding Hui 20 Apr '23

20 Apr '23

For both arm64 and x86, handle and recovery from page faults due to EFI runtime service, and disable subsequent invoking, we can avoid crash the whole system when running on buggy EFI firmware, and get log like this: kernel: [Firmware Bug]: Unable to handle paging request in EFI runtime service kernel: CPU: 54 PID: 8 Comm: kworker/u256:0 Kdump: loaded Tainted: G IOE 4.19.90-2112.8.0.0131.oe1.aarch64.debug #66 kernel: Hardware name: O.D.M FT-2500 Platform/T1DMFT-E4 , BIOS KL4.26.ODM.S.032.210904.R 09/04/21 13:28:40 kernel: Workqueue: efi_rts_wq efi_call_rts kernel: Call trace: kernel: dump_backtrace+0x0/0x170 kernel: show_stack+0x24/0x30 kernel: dump_stack+0xa4/0xe8 kernel: efi_runtime_fixup_exception+0x74/0x8c kernel: __do_kernel_fault+0x8c/0x150 kernel: do_page_fault+0x78/0x4c8 kernel: do_translation_fault+0xa8/0xbc kernel: do_mem_abort+0x50/0xe0 kernel: el1_da+0x20/0x94 kernel: 0x213f0c24 kernel: 0x213f0d64 kernel: 0x213f044c kernel: 0x213f04b4 kernel: 0x213f0178 kernel: 0x212e0664 kernel: __efi_rt_asm_wrapper+0x50/0x6c kernel: efi_call_rts+0x414/0x430 kernel: process_one_work+0x1f8/0x490 kernel: worker_thread+0x50/0x4b8 kernel: kthread+0x134/0x138 kernel: ret_from_fork+0x10/0x18 kernel: [Firmware Bug]: Synchronous exception occurred in EFI runtime service get_time() kernel: rtc-efi rtc-efi: can't read time kernel: efi: EFI Runtime Services are disabled! Anders Roxell (1): efi: Fix build error due to enum collision between efi.h and ima.h Ard Biesheuvel (1): arm64: efi: Recover from synchronous exceptions occurring in firmware Sai Praneeth (2): efi: Make efi_rts_work accessible to efi page fault handler efi/x86: Handle page faults occurring while running EFI runtime services Sami Tolvanen (1): arm64: efi: Restore register x18 if it was corrupted Waiman Long (1): efi: Fix debugobjects warning on 'efi_rts_work' arch/arm64/include/asm/efi.h | 9 ++ arch/arm64/kernel/efi-rt-wrapper.S | 46 +++++++++- arch/arm64/kernel/efi.c | 26 ++++++ arch/arm64/mm/fault.c | 4 + arch/x86/include/asm/efi.h | 1 + arch/x86/mm/fault.c | 9 ++ arch/x86/platform/efi/quirks.c | 78 +++++++++++++++++ drivers/firmware/efi/runtime-wrappers.c | 107 +++++++++--------------- include/linux/efi.h | 42 ++++++++++ 9 files changed, 252 insertions(+), 70 deletions(-) -- 2.17.1

1 6

[PATCH openEuler-1.0-LTS] iommu/arm-smmu-v3: Fix UAF when handle evt during iommu group removing
by Ding Hui 20 Apr '23

20 Apr '23

driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6WKM7 CVE: NA -------- A use-after-free issue like following: [ 2257.819189] arm-smmu-v3 arm-smmu-v3.4.auto: EVTQ overflow detected -- events lost [ 2257.819197] arm-smmu-v3 arm-smmu-v3.4.auto: event 0x10 received: [ 2257.819199] arm-smmu-v3 arm-smmu-v3.4.auto: 0x0000820000000010 [ 2257.819201] arm-smmu-v3 arm-smmu-v3.4.auto: 0x0000020000000000 [ 2257.819202] arm-smmu-v3 arm-smmu-v3.4.auto: 0x00000000dfea7218 [ 2257.819206] iommu: Removing device 0000:82:00.0 from group 49 [ 2257.819207] arm-smmu-v3 arm-smmu-v3.4.auto: 0x00000000dfea7000 [ 2257.819211] arm-smmu-v3 arm-smmu-v3.4.auto: event 0x10 received: [ 2257.819212] arm-smmu-v3 arm-smmu-v3.4.auto: 0x0000820000000010 [ 2257.819214] arm-smmu-v3 arm-smmu-v3.4.auto: 0x0000020000000000 [ 2257.819215] arm-smmu-v3 arm-smmu-v3.4.auto: 0x00000000dfea722c [ 2257.819216] arm-smmu-v3 arm-smmu-v3.4.auto: 0x00000000dfea7000 [ 2257.819218] ================================================================== [ 2257.819228] BUG: KASAN: use-after-free in iommu_report_device_fault+0x520/0x5c0 [ 2257.819230] Read of size 8 at addr ffffa02c516c1320 by task irq/63-arm-smmu/483 [ 2257.819231] [ 2257.819235] CPU: 25 PID: 483 Comm: irq/63-arm-smmu Kdump: loaded Tainted: G OE 4.19.90-2205.3.0.0149.oe1.aarch64+debug #1 [ 2257.819236] Hardware name: Huawei S920S00/BC82AMDGK, BIOS 1.68 11/10/2020 [ 2257.819237] Call trace: [ 2257.819240] dump_backtrace+0x0/0x320 [ 2257.819242] show_stack+0x24/0x30 [ 2257.819246] dump_stack+0xdc/0x128 [ 2257.819251] print_address_description+0x68/0x278 [ 2257.819253] kasan_report+0x1e4/0x308 [ 2257.819254] __asan_report_load8_noabort+0x30/0x40 [ 2257.819257] iommu_report_device_fault+0x520/0x5c0 [ 2257.819260] arm_smmu_handle_evt+0x300/0x428 [ 2257.819261] arm_smmu_evtq_thread+0x27c/0x460 [ 2257.819264] irq_thread_fn+0x88/0x140 [ 2257.819266] irq_thread+0x190/0x318 [ 2257.819268] kthread+0x2a4/0x320 [ 2257.819270] ret_from_fork+0x10/0x18 [ 2257.819271] [ 2257.819273] Allocated by task 95166: [ 2257.819275] kasan_kmalloc+0xd0/0x178 [ 2257.819277] kmem_cache_alloc_trace+0x100/0x210 [ 2257.819279] iommu_group_add_device+0x254/0xe18 [ 2257.819280] iommu_group_get_for_dev+0x198/0x480 [ 2257.819282] arm_smmu_add_device+0x424/0x988 [ 2257.819284] iort_iommu_configure+0x33c/0x5b8 [ 2257.819287] acpi_dma_configure+0x9c/0xf8 [ 2257.819289] pci_dma_configure+0x124/0x158 [ 2257.819291] dma_configure+0x5c/0x80 [ 2257.819294] really_probe+0xcc/0x920 [ 2257.819296] driver_probe_device+0x224/0x308 [ 2257.819298] __device_attach_driver+0x154/0x260 [ 2257.819299] bus_for_each_drv+0xe4/0x178 [ 2257.819301] __device_attach+0x1bc/0x2a8 [ 2257.819302] device_attach+0x24/0x30 [ 2257.819304] pci_bus_add_device+0x7c/0xe8 [ 2257.819305] pci_bus_add_devices+0x70/0x168 [ 2257.819307] pci_bus_add_devices+0x114/0x168 [ 2257.819308] pci_rescan_bus+0x38/0x48 [ 2257.819310] bus_rescan_store+0xc4/0xe8 [ 2257.819312] bus_attr_store+0x70/0x98 [ 2257.819314] sysfs_kf_write+0x104/0x170 [ 2257.819316] kernfs_fop_write+0x23c/0x430 [ 2257.819319] __vfs_write+0x7c/0xe8 [ 2257.819320] vfs_write+0x12c/0x3d0 [ 2257.819321] ksys_write+0xd4/0x1d8 [ 2257.819322] __arm64_sys_write+0x70/0xa0 [ 2257.819325] el0_svc_common+0xfc/0x278 [ 2257.819327] el0_svc_handler+0x50/0xc0 [ 2257.819329] el0_svc+0x8/0x1b0 [ 2257.819329] [ 2257.819330] Freed by task 95166: [ 2257.819332] __kasan_slab_free+0x114/0x200 [ 2257.819334] kasan_slab_free+0x10/0x18 [ 2257.819335] kfree+0x80/0x1f0 [ 2257.819337] iommu_group_remove_device+0x27c/0x560 [ 2257.819338] arm_smmu_remove_device+0xe8/0x190 [ 2257.819339] iommu_bus_notifier+0x134/0x248 [ 2257.819342] notifier_call_chain+0xb0/0x140 [ 2257.819343] blocking_notifier_call_chain+0x6c/0xd8 [ 2257.819344] device_del+0x578/0x940 [ 2257.819346] pci_remove_bus_device+0x114/0x290 [ 2257.819347] pci_stop_and_remove_bus_device_locked+0x2c/0x40 [ 2257.819349] remove_store+0xdc/0xe8 [ 2257.819352] dev_attr_store+0x60/0x80 [ 2257.819353] sysfs_kf_write+0x104/0x170 [ 2257.819354] kernfs_fop_write+0x23c/0x430 [ 2257.819355] __vfs_write+0x7c/0xe8 [ 2257.819357] vfs_write+0x12c/0x3d0 [ 2257.819358] ksys_write+0xd4/0x1d8 [ 2257.819359] __arm64_sys_write+0x70/0xa0 [ 2257.819361] el0_svc_common+0xfc/0x278 [ 2257.819362] el0_svc_handler+0x50/0xc0 [ 2257.819364] el0_svc+0x8/0x1b0 [ 2257.819364] T0 T1 --------------------------------- --------------------------------- |- arm_smmu_evtq_thread |- arm_smmu_remove_device |- arm_smmu_handle_evt |- iommu_group_remove_device |- kfree(dev->iommu_param) |- arm_smmu_find_master |- iommu_report_device_fault |- arm_smmu_remove_master |- mutex_lock( \ &dev->iommu_param->lock) // UAF Reference upstream mainline commit 395ad89d11fd93f79a6b942e91fc409807a63c4b, move arm_smmu_remove_master() before iommu_group_remove_device(), and hold mutex to protect finding master and subsequent handling. Fixes: b525f0a6f9b0 ("iommu/arm-smmu-v3: Add stall support for platform devices") Signed-off-by: Ding Hui <dinghui(a)sangfor.com.cn> --- drivers/iommu/arm-smmu-v3.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 3309ae6ebc0b..05cb92da6836 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -1742,7 +1742,8 @@ arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid) struct arm_smmu_stream *stream; struct arm_smmu_master_data *master = NULL; - mutex_lock(&smmu->streams_mutex); + lockdep_assert_held(&smmu->streams_mutex); + node = smmu->streams.rb_node; while (node) { stream = rb_entry(node, struct arm_smmu_stream, node); @@ -1755,7 +1756,6 @@ arm_smmu_find_master(struct arm_smmu_device *smmu, u32 sid) break; } } - mutex_unlock(&smmu->streams_mutex); return master; } @@ -1791,9 +1791,12 @@ static int arm_smmu_handle_evt(struct arm_smmu_device *smmu, u64 *evt) if (evt[1] & EVTQ_1_S2) return -EFAULT; + mutex_lock(&smmu->streams_mutex); master = arm_smmu_find_master(smmu, sid); - if (!master) - return -EINVAL; + if (!master) { + ret = -EINVAL; + goto out_unlock; + } /* * The domain is valid until the fault returns, because detach() flushes @@ -1833,6 +1836,8 @@ static int arm_smmu_handle_evt(struct arm_smmu_device *smmu, u64 *evt) arm_smmu_page_response(master->dev, &resp); } +out_unlock: + mutex_unlock(&smmu->streams_mutex); return ret; } @@ -2935,8 +2940,8 @@ static void arm_smmu_remove_device(struct device *dev) iopf_queue_remove_device(dev); if (master->ste.assigned) arm_smmu_detach_dev(dev); - iommu_group_remove_device(dev); arm_smmu_remove_master(smmu, master); + iommu_group_remove_device(dev); iommu_device_unlink(&smmu->iommu, dev); kfree(master); iommu_fwspec_free(dev); -- 2.17.1

1 0

ODD2023-Kernel SIG 开放工作会议
by openEuler conference 19 Apr '23

19 Apr '23

您好！ Kernel SIG 邀请您参加 2023-04-21 16:00 召开的Zoom会议(自动录制) 会议主题：ODD2023-Kernel SIG 开放工作会议会议内容： 1. 华中大网安学院内核贡献团队组建经验分享 2. 互联网领域的挑战与技术 3. ext4文件系统问题（一致性、稳定性）的挖掘和定位 4. 可编程内核技术落地场景分享和未来畅想欢迎继续申报议题~ 会议链接：https://us06web.zoom.us/j/88277699752?pwd=VTB3ZjhFR1pKd0syc3NpMDVDcVRvZz09 会议纪要：https://etherpad.openeuler.org/p/ODD2023_Kernel_SIG 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-04-21 16:00, The subject of the conference is ODD2023-Kernel SIG 开放工作会议, Summary: 1. 华中大网安学院内核贡献团队组建经验分享 2. 互联网领域的挑战与技术 3. ext4文件系统问题（一致性、稳定性）的挖掘和定位 4. 可编程内核技术落地场景分享和未来畅想欢迎继续申报议题~ You can join the meeting at https://us06web.zoom.us/j/88277699752?pwd=VTB3ZjhFR1pKd0syc3NpMDVDcVRvZz09. Add topics at https://etherpad.openeuler.org/p/ODD2023_Kernel_SIG. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

一文解锁 → openEuler Developer Day 2023 游玩指南
by openEuler 19 Apr '23

19 Apr '23

1 0

[PATCH openEuler-1.0-LTS 1/2] x86/speculation: Allow enabling STIBP with legacy IBRS
by Yongqiang Liu 19 Apr '23

19 Apr '23

From: KP Singh <kpsingh(a)kernel.org> stable inclusion from stable-v4.19.276 commit 10543fb3c9b019e45e2045f08f46fdf526add593 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6V7TU CVE: CVE-2023-1998 -------------------------------- commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream. When plain IBRS is enabled (not enhanced IBRS), the logic in spectre_v2_user_select_mitigation() determines that STIBP is not needed. The IBRS bit implicitly protects against cross-thread branch target injection. However, with legacy IBRS, the IBRS bit is cleared on returning to userspace for performance reasons which leaves userspace threads vulnerable to cross-thread branch target injection against which STIBP protects. Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for enabling STIBP (through seccomp/prctl() by default or always-on, if selected by spectre_v2_user kernel cmdline parameter). [ bp: Massage. ] Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS") Reported-by: José Oliveira <joseloliveira11(a)gmail.com> Reported-by: Rodrigo Branco <rodrigo(a)kernelhacking.com> Signed-off-by: KP Singh <kpsingh(a)kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- arch/x86/kernel/cpu/bugs.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 836000481438..a7becbe9a890 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -973,14 +973,18 @@ spectre_v2_parse_user_cmdline(void) return SPECTRE_V2_USER_CMD_AUTO; } -static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode) +static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode) { - return mode == SPECTRE_V2_IBRS || - mode == SPECTRE_V2_EIBRS || + return mode == SPECTRE_V2_EIBRS || mode == SPECTRE_V2_EIBRS_RETPOLINE || mode == SPECTRE_V2_EIBRS_LFENCE; } +static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode) +{ + return spectre_v2_in_eibrs_mode(mode) || mode == SPECTRE_V2_IBRS; +} + static void __init spectre_v2_user_select_mitigation(void) { @@ -1043,12 +1047,19 @@ spectre_v2_user_select_mitigation(void) } /* - * If no STIBP, IBRS or enhanced IBRS is enabled, or SMT impossible, - * STIBP is not required. + * If no STIBP, enhanced IBRS is enabled, or SMT impossible, STIBP + * is not required. + * + * Enhanced IBRS also protects against cross-thread branch target + * injection in user-mode as the IBRS bit remains always set which + * implicitly enables cross-thread protections. However, in legacy IBRS + * mode, the IBRS bit is set only on kernel entry and cleared on return + * to userspace. This disables the implicit cross-thread protection, + * so allow for STIBP to be selected in that case. */ if (!boot_cpu_has(X86_FEATURE_STIBP) || !smt_possible || - spectre_v2_in_ibrs_mode(spectre_v2_enabled)) + spectre_v2_in_eibrs_mode(spectre_v2_enabled)) return; /* @@ -2084,7 +2095,7 @@ static ssize_t mmio_stale_data_show_state(char *buf) static char *stibp_state(void) { - if (spectre_v2_in_ibrs_mode(spectre_v2_enabled)) + if (spectre_v2_in_eibrs_mode(spectre_v2_enabled)) return ""; switch (spectre_v2_user_stibp) { -- 2.25.1

1 1

[PATCH openEuler-22.03-LTS 00/26] Backport CVEs and bugfixes
by Jialin Zhang 18 Apr '23

18 Apr '23

Pull new CVEs: CVE-2023-1829 CVE-2022-36280 CVE-2022-1015 CVE-2023-1989 CVE-2023-30456 CVE-2023-1990 xfs bugfixes from Long Li and yangerkun

1 26

[PATCH openEuler-22.03-LTS-SP1 00/26] Backport CVEs and bugfixes
by Jialin Zhang 18 Apr '23

18 Apr '23

Pull new CVEs: CVE-2023-1829 CVE-2022-36280 CVE-2022-1015 CVE-2023-1989 CVE-2023-30456 CVE-2023-1990 xfs bugfixes from Long Li and yangerkun

1 26

[PATCH OLK-5.10 00/26] Backport CVEs and bugfixes
by Jialin Zhang 18 Apr '23

18 Apr '23

Pull new CVEs: CVE-2023-1829 CVE-2022-36280 CVE-2022-1015 CVE-2023-1989 CVE-2023-30456 CVE-2023-1990 xfs bugfixes from Long Li and yangerkun

1 26

[PATCH OLK-5.10 000/370] Backport 5.10.150 LTS
by Jialin Zhang 18 Apr '23

18 Apr '23

Backport 5.10.150 LTS patches from upstream. Conflicts: Already merged(19): f039b43cbaea inet: fully convert sk->sk_rx_dst to RCU rules 45c33966759e mm: hugetlb: fix UAF in hugetlb_handle_userfault c378c479c517 io_uring/af_unix: defer registered files gc to io_uring release 67cbc8865a66 io_uring: correct pinned_vm accounting 904f881b5736 arm64: topology: fix possible overflow in amu_fie_setup() dbcca76435a6 HID: roccat: Fix use-after-free in roccat_read() 484400d433ca r8152: Rate limit overflow messages d88b88514ef2 crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr 657de36c72f5 arm64: ftrace: fix module PLTs with mcount 29f50bcf0f8b net: mvpp2: fix mvpp2 debugfs leak 6cc0e2afc6a1 bnx2x: fix potential memory leak in bnx2x_tpa_stop() 2a1d03632085 mISDN: fix use-after-free bugs in l1oip timer handlers 0cf6c09dafee ring-buffer: Fix race between reset page and reading page fbb0e601bd51 ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate 483831ad0440 ext4: fix check for block being out of directory size f34ab9516276 ext4: fix null-ptr-deref in ext4_write_info e50472949604 fbdev: smscufx: Fix use-after-free in ufx_ops_open() 7d551b7d6114 block: fix inflight statistics of part0 6b7ae4a904a4 quota: Check next/prev free block number after reading from quota file Context conflict(1): c13d0d2f5a48 usb: host: xhci-plat: suspend and resume clocks Total patches: 389 - 19 = 370

1 370

[PATCH OLK-5.10] x86/speculation: Allow enabling STIBP with legacy IBRS
by Wei Li 18 Apr '23

18 Apr '23

From: KP Singh <kpsingh(a)kernel.org> stable inclusion from stable-v5.10.173 commit abfed855f05863d292de2d0ebab4656791bab9c8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6V7TU CVE: CVE-2023-1998 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 6921ed9049bc7457f66c1596c5b78aec0dae4a9d upstream. When plain IBRS is enabled (not enhanced IBRS), the logic in spectre_v2_user_select_mitigation() determines that STIBP is not needed. The IBRS bit implicitly protects against cross-thread branch target injection. However, with legacy IBRS, the IBRS bit is cleared on returning to userspace for performance reasons which leaves userspace threads vulnerable to cross-thread branch target injection against which STIBP protects. Exclude IBRS from the spectre_v2_in_ibrs_mode() check to allow for enabling STIBP (through seccomp/prctl() by default or always-on, if selected by spectre_v2_user kernel cmdline parameter). [ bp: Massage. ] Fixes: 7c693f54c873 ("x86/speculation: Add spectre_v2=ibrs option to support Kernel IBRS") Reported-by: José Oliveira <joseloliveira11(a)gmail.com> Reported-by: Rodrigo Branco <rodrigo(a)kernelhacking.com> Signed-off-by: KP Singh <kpsingh(a)kernel.org> Signed-off-by: Borislav Petkov (AMD) <bp(a)alien8.de> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/20230220120127.1975241-1-kpsingh@kernel.org Link: https://lore.kernel.org/r/20230221184908.2349578-1-kpsingh@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Wei Li <liwei391(a)huawei.com> --- arch/x86/kernel/cpu/bugs.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c index 25f3fad210e0..0dd4f8a8d821 100644 --- a/arch/x86/kernel/cpu/bugs.c +++ b/arch/x86/kernel/cpu/bugs.c @@ -1051,14 +1051,18 @@ spectre_v2_parse_user_cmdline(void) return SPECTRE_V2_USER_CMD_AUTO; } -static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode) +static inline bool spectre_v2_in_eibrs_mode(enum spectre_v2_mitigation mode) { - return mode == SPECTRE_V2_IBRS || - mode == SPECTRE_V2_EIBRS || + return mode == SPECTRE_V2_EIBRS || mode == SPECTRE_V2_EIBRS_RETPOLINE || mode == SPECTRE_V2_EIBRS_LFENCE; } +static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode) +{ + return spectre_v2_in_eibrs_mode(mode) || mode == SPECTRE_V2_IBRS; +} + static void __init spectre_v2_user_select_mitigation(void) { @@ -1121,12 +1125,19 @@ spectre_v2_user_select_mitigation(void) } /* - * If no STIBP, IBRS or enhanced IBRS is enabled, or SMT impossible, - * STIBP is not required. + * If no STIBP, enhanced IBRS is enabled, or SMT impossible, STIBP + * is not required. + * + * Enhanced IBRS also protects against cross-thread branch target + * injection in user-mode as the IBRS bit remains always set which + * implicitly enables cross-thread protections. However, in legacy IBRS + * mode, the IBRS bit is set only on kernel entry and cleared on return + * to userspace. This disables the implicit cross-thread protection, + * so allow for STIBP to be selected in that case. */ if (!boot_cpu_has(X86_FEATURE_STIBP) || !smt_possible || - spectre_v2_in_ibrs_mode(spectre_v2_enabled)) + spectre_v2_in_eibrs_mode(spectre_v2_enabled)) return; /* @@ -2220,7 +2231,7 @@ static ssize_t mmio_stale_data_show_state(char *buf) static char *stibp_state(void) { - if (spectre_v2_in_ibrs_mode(spectre_v2_enabled)) + if (spectre_v2_in_eibrs_mode(spectre_v2_enabled)) return ""; switch (spectre_v2_user_stibp) { -- 2.25.1

1 0

[PATCH v3] mm: oom: move memcg_print_bad_task() out of mem_cgroup_scan_tasks()
by Kang Chen 17 Apr '23

17 Apr '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 CVE: NA -------------------------------- raw call flow: oom_kill_process -> mem_cgroup_scan_tasks(.., .., message) -> memcg_print_bad_task(message, ..) message is "const char*" type, and incorrectly cast to "oom_control*" type in memcg_print_bad_task. Fix it by moving memcg_print_bad_task out of mem_cgroup_scan_tasks and call it in select_bad_process and dump_tasks. Furthermore, use struct oom_control* directly and remove the useless parm `ret`. Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- v3 -> v2: use type `struct oom_control *` directly and fix bugs v2 -> v1: remove parm `ret` and create a memcg_print_bad_task stub mm/memcontrol.c | 16 +++++++++------- mm/oom_kill.c | 14 ++++++++------ 2 files changed, 17 insertions(+), 13 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 635cb8b65b86..6b4f70d090d6 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1214,9 +1214,6 @@ int mem_cgroup_scan_tasks(struct mem_cgroup *memcg, break; } } -#ifdef CONFIG_MEMCG_QOS - memcg_print_bad_task(arg, ret); -#endif return ret; } @@ -4004,14 +4001,12 @@ bool memcg_low_priority_scan_tasks(int (*fn)(struct task_struct *, void *), return oc->chosen ? true : false; } -void memcg_print_bad_task(void *arg, int ret) +void memcg_print_bad_task(struct oom_control *oc) { - struct oom_control *oc = arg; - if (!static_branch_likely(&memcg_qos_stat_key)) return; - if (!ret && oc->chosen) { + if (oc->chosen) { struct mem_cgroup *memcg; memcg = mem_cgroup_from_task(oc->chosen); @@ -4042,6 +4037,13 @@ int sysctl_memcg_qos_handler(struct ctl_table *table, int write, return ret; } + +#else + +void memcg_print_bad_task(struct oom_control *oc) +{ +} + #endif #ifdef CONFIG_NUMA diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 0f77eb4c6644..9d595265bbf5 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -408,9 +408,10 @@ static void select_bad_process(struct oom_control *oc) { oc->chosen_points = LONG_MIN; - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); - else { + if (is_memcg_oom(oc)) { + if (!mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; #ifdef CONFIG_MEMCG_QOS @@ -473,9 +474,10 @@ static void dump_tasks(struct oom_control *oc) pr_info("Tasks state (memory values in pages):\n"); pr_info("[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name\n"); - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); - else { + if (is_memcg_oom(oc)) { + if (!mem_cgroup_scan_tasks(oc->memcg, dump_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; rcu_read_lock(); -- 2.34.1

1 0

[PATCH openEuler-1.0-LTS] nfc: st-nci: Fix use after free bug in ndlc_remove due to race condition
by Yongqiang Liu 17 Apr '23

17 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.3-rc3 commit 5000fe6c27827a61d8250a7e4a1d26c3298ef4f6 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6UW64 CVE: CVE-2023-1990 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?i… -------------------------------- This bug influences both st_nci_i2c_remove and st_nci_spi_remove. Take st_nci_i2c_remove as an example. In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work with llt_ndlc_sm_work. When it calls ndlc_recv or timeout handler, it will finally call schedule_work to start the work. When we call st_nci_i2c_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in ndlc_remove CPU0 CPU1 |llt_ndlc_sm_work st_nci_i2c_remove | ndlc_remove | st_nci_remove | nci_free_device| kfree(ndev) | //free ndlc->ndev | |llt_ndlc_rcv_queue |nci_recv_frame |//use ndlc->ndev Fixes: 35630df68d60 ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)linaro.org> Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Wei Li <liwei391(a)huawei.com> Reviewed-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/nfc/st-nci/ndlc.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/nfc/st-nci/ndlc.c b/drivers/nfc/st-nci/ndlc.c index f26d938d240f..12d73f9dbe9f 100644 --- a/drivers/nfc/st-nci/ndlc.c +++ b/drivers/nfc/st-nci/ndlc.c @@ -297,13 +297,15 @@ EXPORT_SYMBOL(ndlc_probe); void ndlc_remove(struct llt_ndlc *ndlc) { - st_nci_remove(ndlc->ndev); - /* cancel timers */ del_timer_sync(&ndlc->t1_timer); del_timer_sync(&ndlc->t2_timer); ndlc->t2_active = false; ndlc->t1_active = false; + /* cancel work */ + cancel_work_sync(&ndlc->sm_work); + + st_nci_remove(ndlc->ndev); skb_queue_purge(&ndlc->rcv_q); skb_queue_purge(&ndlc->send_q); -- 2.25.1

1 0

[PATCH v2] mm: oom: move memcg_print_bad_task() out of mem_cgroup_scan_tasks()
by Kang Chen 17 Apr '23

17 Apr '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 CVE: NA -------------------------------- raw call flow: oom_kill_process -> mem_cgroup_scan_tasks(.., .., message) -> memcg_print_bad_task(message, ..) message is "const char*" type, and incorrectly cast to "oom_control*" type in memcg_print_bad_task. Fix it by moving memcg_print_bad_task out of mem_cgroup_scan_tasks and call it in select_bad_process and dump_tasks. Furthermore, remove the useless parm `ret`. Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- v2 -> v1: remove parm `ret` and create a memcg_print_bad_task stub mm/memcontrol.c | 14 +++++++++----- mm/oom_kill.c | 14 ++++++++------ 2 files changed, 17 insertions(+), 11 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 635cb8b65b86..e87a96a6c712 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1214,9 +1214,6 @@ int mem_cgroup_scan_tasks(struct mem_cgroup *memcg, break; } } -#ifdef CONFIG_MEMCG_QOS - memcg_print_bad_task(arg, ret); -#endif return ret; } @@ -4004,14 +4001,14 @@ bool memcg_low_priority_scan_tasks(int (*fn)(struct task_struct *, void *), return oc->chosen ? true : false; } -void memcg_print_bad_task(void *arg, int ret) +void memcg_print_bad_task(void *arg) { struct oom_control *oc = arg; if (!static_branch_likely(&memcg_qos_stat_key)) return; - if (!ret && oc->chosen) { + if (oc->chosen) { struct mem_cgroup *memcg; memcg = mem_cgroup_from_task(oc->chosen); @@ -4042,6 +4039,13 @@ int sysctl_memcg_qos_handler(struct ctl_table *table, int write, return ret; } + +#else + +void memcg_print_bad_task(void *arg) +{ +} + #endif #ifdef CONFIG_NUMA diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 0f77eb4c6644..03df1a9093b5 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -408,9 +408,10 @@ static void select_bad_process(struct oom_control *oc) { oc->chosen_points = LONG_MIN; - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); - else { + if (is_memcg_oom(oc)) { + if (mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; #ifdef CONFIG_MEMCG_QOS @@ -473,9 +474,10 @@ static void dump_tasks(struct oom_control *oc) pr_info("Tasks state (memory values in pages):\n"); pr_info("[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name\n"); - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); - else { + if (is_memcg_oom(oc)) { + if (mem_cgroup_scan_tasks(oc->memcg, dump_task, oc)) + memcg_print_bad_task(oc); + } else { struct task_struct *p; rcu_read_lock(); -- 2.34.1

1 0

[PATCH openEuler-1.0-LTS] Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
by Yongqiang Liu 17 Apr '23

17 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.3-rc7 commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6UW68 CVE: CVE-2023-1989 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Liu Jian <liujian56(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/bluetooth/btsdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 20142bc77554..1325b1df4a8e 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -356,6 +356,7 @@ static void btsdio_remove(struct sdio_func *func) if (!data) return; + cancel_work_sync(&data->work); hdev = data->hdev; sdio_set_drvdata(func, NULL); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
by Yongqiang Liu 17 Apr '23

17 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.3-rc7 commit 73f7b171b7c09139eb3c6a5677c200dc1be5f318 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6UW68 CVE: CVE-2023-1989 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- In btsdio_probe, the data->work is bound with btsdio_work. It will be started in btsdio_send_frame. If the btsdio_remove runs with a unfinished work, there may be a race condition that hdev is freed but used in btsdio_work. Fix it by canceling the work before do cleanup in btsdio_remove. Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Liu Jian <liujian56(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/bluetooth/btsdio.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 20142bc77554..1325b1df4a8e 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -356,6 +356,7 @@ static void btsdio_remove(struct sdio_func *func) if (!data) return; + cancel_work_sync(&data->work); hdev = data->hdev; sdio_set_drvdata(func, NULL); -- 2.25.1

1 0

[PATCH rdma-core v3 0/2] Add support for SVE Direct WQE
by Chengchang Tang 17 Apr '23

17 Apr '23

From: Juan Zhou <zhoujuan51(a)h-partners.com> Yixing Liu (2): Update kernel headers libhns: Add support for SVE Direct WQE CMakeLists.txt | 1 + buildlib/RDMA_EnableCStd.cmake | 17 +++++++++++++++++ kernel-headers/rdma/hns-abi.h | 1 + providers/hns/CMakeLists.txt | 5 +++++ providers/hns/hns_roce_u_hw_v2.c | 21 ++++++++++++++++++++- 5 files changed, 44 insertions(+), 1 deletion(-) -- 2.30.0

1 0

[PATCH v4] eulerfs: fix wrong dereferencing in eufs_lookup
by Kang Chen 17 Apr '23

17 Apr '23

uniontech inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6TN56 CVE: NA -------------------------------- smatch report: fs/eulerfs/namei.c:118 eufs_lookup() error: 'inode' dereferencing possible ERR_PTR() fix it by using the ino above in eufs_err. Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- I think we need use IS_ERR to handle all errors, the err can't pass to BUG_ON line later. v4 -> v3: fix some bugs and return EIO/ENOMEM anyway. v3 -> v2: use IS_ERR to handle all kind err v2 -> v1: use correct string format fs/eulerfs/namei.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/fs/eulerfs/namei.c b/fs/eulerfs/namei.c index e4c6c36575f2..7064de644b34 100644 --- a/fs/eulerfs/namei.c +++ b/fs/eulerfs/namei.c @@ -114,9 +114,11 @@ static struct dentry *eufs_lookup(struct inode *dir, struct dentry *dentry, goto not_found; inode = eufs_iget(dir->i_sb, s2p(dir->i_sb, de->inode)); - if (inode == ERR_PTR(-ESTALE)) { - eufs_err(dir->i_sb, "deleted inode referenced: 0x%lx", - inode->i_ino); + if (IS_ERR(inode)) { + eufs_err(dir->i_sb, "eufs_iget failed ino 0x%llx err %d\n", + le64_to_cpu(de->inode), PTR_ERR(inode)); + if (inode == ERR_PTR(-ENOMEM)) + return ERR_PTR(-ENOMEM); return ERR_PTR(-EIO); } not_found: -- 2.34.1

3 2

[PATCH] mm: move memcg_print_bad_task out of mem_cgroup_scan_tasks to avoid wrong type cast
by Kang Chen 16 Apr '23

16 Apr '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I6NYW4 CVE: NA -------------------------------- raw call flow: oom_kill_process -> mem_cgroup_scan_tasks(.., .., message) -> memcg_print_bad_task(message, ..) message is "const char*" type, and incorrectly cast to "oom_control*" type in memcg_print_bad_task. Fix it by moving memcg_print_bad_task out of mem_cgroup_scan_tasks and call it in select_bad_process and dump_tasks. Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- mm/memcontrol.c | 3 --- mm/oom_kill.c | 24 ++++++++++++++++++------ 2 files changed, 18 insertions(+), 9 deletions(-) diff --git a/mm/memcontrol.c b/mm/memcontrol.c index 635cb8b65b86..8e0d5d484153 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1214,9 +1214,6 @@ int mem_cgroup_scan_tasks(struct mem_cgroup *memcg, break; } } -#ifdef CONFIG_MEMCG_QOS - memcg_print_bad_task(arg, ret); -#endif return ret; } diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 0f77eb4c6644..1e3ba16dd748 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -406,11 +406,17 @@ static int oom_evaluate_task(struct task_struct *task, void *arg) */ static void select_bad_process(struct oom_control *oc) { + int ret; oc->chosen_points = LONG_MIN; - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); - else { + if (is_memcg_oom(oc)) { + ret = mem_cgroup_scan_tasks(oc->memcg, oom_evaluate_task, oc); + +#ifdef CONFIG_MEMCG_QOS + memcg_print_bad_task(oc, ret); +#endif + + } else { struct task_struct *p; #ifdef CONFIG_MEMCG_QOS @@ -470,12 +476,18 @@ static int dump_task(struct task_struct *p, void *arg) */ static void dump_tasks(struct oom_control *oc) { + int ret; pr_info("Tasks state (memory values in pages):\n"); pr_info("[ pid ] uid tgid total_vm rss pgtables_bytes swapents oom_score_adj name\n"); - if (is_memcg_oom(oc)) - mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); - else { + if (is_memcg_oom(oc)) { + ret = mem_cgroup_scan_tasks(oc->memcg, dump_task, oc); + +#ifdef CONFIG_MEMCG_QOS + memcg_print_bad_task(oc, ret); +#endif + + } else { struct task_struct *p; rcu_read_lock(); -- 2.34.1

1 0

[PATCH OLK-5.10 0/8] SAS-related bugfix
by Yihang Li 14 Apr '23

14 Apr '23

From: xiabing <xiabing12(a)h-partners.com> *** BLURB HERE *** Jie Zhan (3): scsi: libsas: Add smp_ata_check_ready_type() scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset scsi: libsas: Do not export sas_ata_wait_after_reset() Martin K. Petersen (1): scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice Xingui Yang (1): scsi: sd: Update DIX config every time sd_revalidate_disk() is called Yihang Li (3): scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id scsi: hisi_sas: Exit suspending state when usage count is greater than 0 scsi: hisi_sas: Ensure all enabled PHYs up during controller reset drivers/scsi/hisi_sas/hisi_sas_main.c | 42 ++++++++++++--- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 73 ++++++++++++++++++++------ drivers/scsi/libsas/sas_ata.c | 28 +++++++++- drivers/scsi/libsas/sas_expander.c | 4 +- drivers/scsi/libsas/sas_internal.h | 2 + drivers/scsi/sd.c | 59 +++++++++++---------- drivers/scsi/sd_dif.c | 12 ++--- include/scsi/sas_ata.h | 7 ++- 8 files changed, 161 insertions(+), 66 deletions(-) -- 2.30.0

1 8

快看，内核&编译器领域 SIG组来啦！诚邀您参加 openEuler Developer Day 2023
by openEuler 14 Apr '23

14 Apr '23

1 0

[PATCH openEuler-22.03-LTS-SP1 0/5] Backport 5.10.150 LTS
by Jialin Zhang 13 Apr '23

13 Apr '23

Backport 5.10.151 LTS patches from upstream. Makefile | 3 +++ scripts/link-vmlinux.sh | 2 +- scripts/pahole-flags.sh | 21 +++++++++++++++++++++ 3 files changed, 25 insertions(+), 1 deletion(-) create mode 100755 scripts/pahole-flags.sh -- 2.25.1

1 5

[PATCH openEuler-22.03-LTS-SP1 v2 000/370] Backport 5.10.150 LTS
by Jialin Zhang 13 Apr '23

13 Apr '23

1 370

[OLK-5.10 0/2]
by zhoujiadong 13 Apr '23

13 Apr '23

*** BLURB HERE *** zhoujiadong (2): net/hinic3: Huawei Interface Card driver first commit net/hinic3: Huawei Interface Card hw driver first commit drivers/net/ethernet/huawei/Kconfig | 1 + drivers/net/ethernet/huawei/Makefile | 1 + drivers/net/ethernet/huawei/hinic3/Kconfig | 15 + drivers/net/ethernet/huawei/hinic3/Makefile | 45 + .../ethernet/huawei/hinic3/cfg_mgt_comm_pub.h | 212 ++ .../ethernet/huawei/hinic3/comm_cmdq_intf.h | 235 ++ .../net/ethernet/huawei/hinic3/comm_defs.h | 102 + .../ethernet/huawei/hinic3/comm_msg_intf.h | 663 +++++ .../ethernet/huawei/hinic3/hinic3_comm_cmd.h | 181 ++ .../ethernet/huawei/hinic3/hinic3_common.h | 125 + .../net/ethernet/huawei/hinic3/hinic3_crm.h | 1166 +++++++++ .../net/ethernet/huawei/hinic3/hinic3_dbg.c | 983 ++++++++ .../net/ethernet/huawei/hinic3/hinic3_dcb.c | 405 +++ .../net/ethernet/huawei/hinic3/hinic3_dcb.h | 78 + .../ethernet/huawei/hinic3/hinic3_ethtool.c | 1331 ++++++++++ .../huawei/hinic3/hinic3_ethtool_stats.c | 1233 ++++++++++ .../ethernet/huawei/hinic3/hinic3_filter.c | 483 ++++ .../net/ethernet/huawei/hinic3/hinic3_hw.h | 832 +++++++ .../net/ethernet/huawei/hinic3/hinic3_irq.c | 189 ++ .../net/ethernet/huawei/hinic3/hinic3_lld.h | 205 ++ .../ethernet/huawei/hinic3/hinic3_mag_cfg.c | 953 ++++++++ .../net/ethernet/huawei/hinic3/hinic3_main.c | 1125 +++++++++ .../huawei/hinic3/hinic3_mgmt_interface.h | 1245 ++++++++++ .../net/ethernet/huawei/hinic3/hinic3_mt.h | 665 +++++ .../huawei/hinic3/hinic3_netdev_ops.c | 1975 +++++++++++++++ .../net/ethernet/huawei/hinic3/hinic3_nic.h | 183 ++ .../ethernet/huawei/hinic3/hinic3_nic_cfg.c | 1608 ++++++++++++ .../ethernet/huawei/hinic3/hinic3_nic_cfg.h | 621 +++++ .../huawei/hinic3/hinic3_nic_cfg_vf.c | 638 +++++ .../ethernet/huawei/hinic3/hinic3_nic_cmd.h | 162 ++ .../ethernet/huawei/hinic3/hinic3_nic_dbg.c | 146 ++ .../ethernet/huawei/hinic3/hinic3_nic_dbg.h | 21 + .../ethernet/huawei/hinic3/hinic3_nic_dev.h | 387 +++ .../ethernet/huawei/hinic3/hinic3_nic_event.c | 580 +++++ .../ethernet/huawei/hinic3/hinic3_nic_io.c | 1122 +++++++++ .../ethernet/huawei/hinic3/hinic3_nic_io.h | 326 +++ .../ethernet/huawei/hinic3/hinic3_nic_prof.c | 47 + .../ethernet/huawei/hinic3/hinic3_nic_prof.h | 60 + .../ethernet/huawei/hinic3/hinic3_nic_qp.h | 385 +++ .../ethernet/huawei/hinic3/hinic3_ntuple.c | 907 +++++++ .../ethernet/huawei/hinic3/hinic3_prepare.sh | 262 ++ .../ethernet/huawei/hinic3/hinic3_profile.h | 147 ++ .../net/ethernet/huawei/hinic3/hinic3_rss.c | 978 ++++++++ .../net/ethernet/huawei/hinic3/hinic3_rss.h | 100 + .../ethernet/huawei/hinic3/hinic3_rss_cfg.c | 384 +++ .../net/ethernet/huawei/hinic3/hinic3_rx.c | 1344 ++++++++++ .../net/ethernet/huawei/hinic3/hinic3_rx.h | 155 ++ .../ethernet/huawei/hinic3/hinic3_srv_nic.h | 213 ++ .../net/ethernet/huawei/hinic3/hinic3_tx.c | 1016 ++++++++ .../net/ethernet/huawei/hinic3/hinic3_tx.h | 159 ++ .../net/ethernet/huawei/hinic3/hinic3_wq.h | 134 + .../huawei/hinic3/hw/hinic3_api_cmd.c | 1211 +++++++++ .../huawei/hinic3/hw/hinic3_api_cmd.h | 286 +++ .../ethernet/huawei/hinic3/hw/hinic3_cmdq.c | 1543 ++++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_cmdq.h | 204 ++ .../ethernet/huawei/hinic3/hw/hinic3_common.c | 93 + .../ethernet/huawei/hinic3/hw/hinic3_csr.h | 187 ++ .../huawei/hinic3/hw/hinic3_dev_mgmt.c | 803 ++++++ .../huawei/hinic3/hw/hinic3_dev_mgmt.h | 105 + .../huawei/hinic3/hw/hinic3_devlink.c | 431 ++++ .../huawei/hinic3/hw/hinic3_devlink.h | 149 ++ .../ethernet/huawei/hinic3/hw/hinic3_eqs.c | 1385 +++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_eqs.h | 165 ++ .../ethernet/huawei/hinic3/hw/hinic3_hw_api.c | 453 ++++ .../ethernet/huawei/hinic3/hw/hinic3_hw_api.h | 141 ++ .../ethernet/huawei/hinic3/hw/hinic3_hw_cfg.c | 1480 +++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_hw_cfg.h | 332 +++ .../huawei/hinic3/hw/hinic3_hw_comm.c | 1540 ++++++++++++ .../huawei/hinic3/hw/hinic3_hw_comm.h | 51 + .../ethernet/huawei/hinic3/hw/hinic3_hw_mt.c | 599 +++++ .../ethernet/huawei/hinic3/hw/hinic3_hw_mt.h | 49 + .../ethernet/huawei/hinic3/hw/hinic3_hwdev.c | 2141 ++++++++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_hwdev.h | 175 ++ .../ethernet/huawei/hinic3/hw/hinic3_hwif.c | 994 ++++++++ .../ethernet/huawei/hinic3/hw/hinic3_hwif.h | 113 + .../ethernet/huawei/hinic3/hw/hinic3_lld.c | 1413 +++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_mbox.c | 1842 ++++++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_mbox.h | 267 ++ .../ethernet/huawei/hinic3/hw/hinic3_mgmt.c | 1515 ++++++++++++ .../ethernet/huawei/hinic3/hw/hinic3_mgmt.h | 179 ++ .../huawei/hinic3/hw/hinic3_nictool.c | 974 ++++++++ .../huawei/hinic3/hw/hinic3_nictool.h | 35 + .../huawei/hinic3/hw/hinic3_pci_id_tbl.h | 15 + .../huawei/hinic3/hw/hinic3_prof_adap.c | 44 + .../huawei/hinic3/hw/hinic3_prof_adap.h | 111 + .../ethernet/huawei/hinic3/hw/hinic3_sm_lt.h | 160 ++ .../ethernet/huawei/hinic3/hw/hinic3_sml_lt.c | 160 ++ .../ethernet/huawei/hinic3/hw/hinic3_sriov.c | 267 ++ .../ethernet/huawei/hinic3/hw/hinic3_sriov.h | 35 + .../net/ethernet/huawei/hinic3/hw/hinic3_wq.c | 159 ++ .../huawei/hinic3/hw/ossl_knl_linux.c | 533 ++++ drivers/net/ethernet/huawei/hinic3/mag_cmd.h | 879 +++++++ .../ethernet/huawei/hinic3/mgmt_msg_base.h | 27 + .../net/ethernet/huawei/hinic3/nic_cfg_comm.h | 66 + drivers/net/ethernet/huawei/hinic3/ossl_knl.h | 38 + .../ethernet/huawei/hinic3/ossl_knl_linux.h | 2178 +++++++++++++++++ 96 files changed, 52060 insertions(+) create mode 100644 drivers/net/ethernet/huawei/hinic3/Kconfig create mode 100644 drivers/net/ethernet/huawei/hinic3/Makefile create mode 100644 drivers/net/ethernet/huawei/hinic3/cfg_mgt_comm_pub.h create mode 100644 drivers/net/ethernet/huawei/hinic3/comm_cmdq_intf.h create mode 100644 drivers/net/ethernet/huawei/hinic3/comm_defs.h create mode 100644 drivers/net/ethernet/huawei/hinic3/comm_msg_intf.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_comm_cmd.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_common.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_crm.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_dbg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_dcb.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_dcb.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_ethtool.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_ethtool_stats.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_filter.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_hw.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_irq.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_lld.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mag_cfg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_main.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mgmt_interface.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_mt.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_netdev_ops.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cfg_vf.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_cmd.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dbg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dbg.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_dev.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_event.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_io.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_prof.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_prof.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_nic_qp.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_ntuple.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_prepare.sh create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_profile.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rss_cfg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_rx.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_srv_nic.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_tx.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hinic3_wq.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_api_cmd.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_api_cmd.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_cmdq.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_cmdq.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_common.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_csr.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_dev_mgmt.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_dev_mgmt.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_devlink.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_devlink.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_eqs.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_eqs.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_api.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_api.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_cfg.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_cfg.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_comm.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_comm.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_mt.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hw_mt.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hwdev.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hwdev.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hwif.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_hwif.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_lld.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_mbox.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_mbox.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_mgmt.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_mgmt.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_nictool.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_nictool.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_pci_id_tbl.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_prof_adap.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_prof_adap.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_sm_lt.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_sml_lt.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_sriov.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_sriov.h create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/hinic3_wq.c create mode 100644 drivers/net/ethernet/huawei/hinic3/hw/ossl_knl_linux.c create mode 100644 drivers/net/ethernet/huawei/hinic3/mag_cmd.h create mode 100644 drivers/net/ethernet/huawei/hinic3/mgmt_msg_base.h create mode 100644 drivers/net/ethernet/huawei/hinic3/nic_cfg_comm.h create mode 100644 drivers/net/ethernet/huawei/hinic3/ossl_knl.h create mode 100644 drivers/net/ethernet/huawei/hinic3/ossl_knl_linux.h -- 2.24.0

1 2

[PATCH openEuler-22.03-LTS-SP1 000/371] Backport 5.10.150 LTS
by Jialin Zhang 13 Apr '23

13 Apr '23

Backport 5.10.150 LTS patches from upstream. Conflicts: Already merged(18): f039b43cbaea inet: fully convert sk->sk_rx_dst to RCU rules 45c33966759e mm: hugetlb: fix UAF in hugetlb_handle_userfault 67cbc8865a66 io_uring: correct pinned_vm accounting 904f881b5736 arm64: topology: fix possible overflow in amu_fie_setup() dbcca76435a6 HID: roccat: Fix use-after-free in roccat_read() 484400d433ca r8152: Rate limit overflow messages d88b88514ef2 crypto: hisilicon/zip - fix mismatch in get/set sgl_sge_nr 657de36c72f5 arm64: ftrace: fix module PLTs with mcount 29f50bcf0f8b net: mvpp2: fix mvpp2 debugfs leak 6cc0e2afc6a1 bnx2x: fix potential memory leak in bnx2x_tpa_stop() 2a1d03632085 mISDN: fix use-after-free bugs in l1oip timer handlers 0cf6c09dafee ring-buffer: Fix race between reset page and reading page fbb0e601bd51 ext4: ext4_read_bh_lock() should submit IO if the buffer isn't uptodate 483831ad0440 ext4: fix check for block being out of directory size f34ab9516276 ext4: fix null-ptr-deref in ext4_write_info e50472949604 fbdev: smscufx: Fix use-after-free in ufx_ops_open() 7d551b7d6114 block: fix inflight statistics of part0 6b7ae4a904a4 quota: Check next/prev free block number after reading from quota file Context conflict(1): c13d0d2f5a48 usb: host: xhci-plat: suspend and resume clocks Total patches: 389 - 18 = 371 Adrian Hunter (1): perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc Adrián Larumbe (1): drm/meson: explicitly remove aggregate driver at module unload time Albert Briscoe (1): usb: gadget: function: fix dangling pnp_string in f_printer.c Alex Deucher (1): Revert "drm/amdgpu: make sure to init common IP before gmc" Alexander Aring (4): fs: dlm: fix race between test_bit() and queue_work() fs: dlm: handle -EBUSY first in lock arg validation net: ieee802154: return -EINVAL for unknown addr type Revert "net/ieee802154: reject zero-sized raw_sendmsg()" Alexander Coffin (1): wifi: brcmfmac: fix use-after-free bug in brcmf_netdev_start_xmit() Alexander Stein (6): ARM: dts: imx6q: add missing properties for sram ARM: dts: imx6dl: add missing properties for sram ARM: dts: imx6qp: add missing properties for sram ARM: dts: imx6sl: add missing properties for sram ARM: dts: imx6sll: add missing properties for sram ARM: dts: imx6sx: add missing properties for sram Alvin Šipraga (1): drm: bridge: adv7511: fix CEC power down control register offset Andreas Pape (1): ALSA: dmaengine: increment buffer pointer atomically Andrew Bresticker (2): riscv: Allow PROT_WRITE-only mmap() riscv: Make VM_WRITE imply VM_READ Andrew Perepechko (1): jbd2: wake up journal waiters in FIFO order, not LIFO Andri Yngvason (1): HID: multitouch: Add memory barriers Anna Schumaker (1): NFSD: Return nfserr_serverfault if splice_ok but buf->pages have data Anssi Hannula (4): can: kvaser_usb: Fix use of uninitialized completion can: kvaser_usb_leaf: Fix overread with an invalid command can: kvaser_usb_leaf: Fix TX queue out of sync after restart can: kvaser_usb_leaf: Fix CAN state after restart Ard Biesheuvel (1): efi: libstub: drop pointless get_memory_map() call Aric Cyr (1): drm/amd/display: Remove interface for periodic interrupt 1 Arnd Bergmann (1): Bluetooth: btusb: fix excessive stack usage Arvid Norlander (1): ACPI: video: Add Toshiba Satellite/Portege Z830 quirk Asmaa Mnebhi (1): i2c: mlxbf: support lock mechanism Bernard Metzler (1): RDMA/siw: Always consume all skbuf data in sk_data_ready() upcall. Bitterblue Smith (4): wifi: rtl8xxxu: Fix skb misuse in TX queue selection wifi: rtl8xxxu: gen2: Fix mistake in path B IQ calibration wifi: rtl8xxxu: Remove copy-paste leftover in gen2_update_rate_mask wifi: rtl8xxxu: Fix AIFS written to REG_EDCA_*_PARAM Callum Osmotherly (1): ALSA: hda/realtek: remove ALC289_FIXUP_DUAL_SPK for Dell 5530 Carlos Llamas (1): mm/mmap: undo ->mmap() when arch_validate_flags() fails Chao Qin (1): powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue Chao Yu (5): f2fs: fix to do sanity check on destination blkaddr during recovery f2fs: fix to do sanity check on summary info f2fs: fix to avoid REQ_TIME and CP_TIME collision f2fs: fix to account FS_CP_DATA_IO correctly f2fs: fix wrong condition to trigger background checkpoint correctly Chen-Yu Tsai (2): drm/bridge: parade-ps8640: Fix regulator supply order clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent Christophe JAILLET (11): MIPS: SGI-IP27: Free some unused memory nfsd: Fix a memory leak in an error handling path spi: mt7621: Fix an error message in mt7621_spi_probe() mmc: au1xmmc: Fix an error handling path in au1xmmc_probe() ASoC: da7219: Fix an error handling path in da7219_register_dai_clks() mmc: wmt-sdmmc: Fix an error handling path in wmt_mci_probe() serial: 8250: Add an empty line and remove some useless {} mfd: intel_soc_pmic: Fix an error handling path in intel_soc_pmic_i2c_probe() mfd: fsl-imx25: Fix an error handling path in mx25_tsadc_setup_irq() mfd: lp8788: Fix an error handling path in lp8788_probe() mfd: lp8788: Fix an error handling path in lp8788_irq_init() and lp8788_irq_init() Chunfeng Yun (2): usb: common: add function to get interval expressed in us unit usb: common: move function's kerneldoc next to its definition Claudiu Beznea (4): iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAX iio: adc: at91-sama5d2_adc: check return status for pressure and touch iio: adc: at91-sama5d2_adc: lock around oversampling and sample freq iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resume Coly Li (1): bcache: fix set_at_max_writeback_rate() for multiple attached devices Dai Ngo (1): NFSD: fix use-after-free on source server when doing inter-server copy Daisuke Matsuda (1): IB: Set IOVA/LENGTH on IB_MR in core/uverbs layers Damian Muszynski (1): crypto: qat - fix DMA transfer direction Dan Carpenter (10): wifi: rtl8xxxu: tighten bounds checking in rtl8xxxu_read_efuse() drm/bridge: Avoid uninitialized variable warning platform/chrome: fix memory corruption in ioctl fpga: prevent integer overflow in dfl_feature_ioctl_set_irq() mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct() drivers: serial: jsm: fix some leaks in probe mfd: fsl-imx25: Fix check for platform_get_irq() errors iommu/omap: Fix buffer overflow in debugfs crypto: marvell/octeontx - prevent integer overflows crypto: cavium - prevent integer overflow loading firmware Daniel Golle (5): wifi: rt2x00: don't run Rt5592 IQ calibration on MT7620 wifi: rt2x00: set correct TX_SW_CFG1 MAC register for MT7620 wifi: rt2x00: set VGC gain for both chains of MT7620 wifi: rt2x00: set SoC wmac clock register wifi: rt2x00: correctly set BBP register 86 for MT7620 Dave Jiang (1): dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup() David Collins (1): spmi: pmic-arb: correct duplicate APID to PPID mapping logic David Gow (1): drm/amd/display: fix overflow on MIN_I64 definition Dmitry Baryshkov (1): drm/msm/dpu: index dpu_kms->hw_vbif using vbif_idx Dmitry Osipenko (3): drm/virtio: Check whether transferred 2D BO is shmem media: cedrus: Set the platform driver data earlier soc/tegra: fuse: Drop Kconfig dependency on TEGRA20_APB_DMA Dmitry Torokhov (2): ARM: dts: exynos: correct s5k6a3 reset polarity on Midas family ARM: dts: exynos: fix polarity of VBUS GPIO of Origen Dongliang Mu (2): phy: qualcomm: call clk_disable_unprepare in the error handling usb: idmouse: fix an uninit-value in idmouse_open Duoming Zhou (1): scsi: libsas: Fix use-after-free bug in smp_execute_task_sg() Eddie James (2): iio: pressure: dps310: Refactor startup procedure iio: pressure: dps310: Reset chip after timeout Eric Dumazet (2): once: add DO_ONCE_SLOW() for sleepable contexts tcp: annotate data-race around tcp_md5sig_pool_populated Fangrui Song (1): riscv: Pass -mno-relax only on lld < 15.0.0 Filipe Manana (1): btrfs: fix race between quota enable and quota rescan ioctl Geert Uytterhoeven (1): ARM: Drop CMDLINE_* dependency on ATAGS Giovanni Cabiddu (1): crypto: qat - use pre-allocated buffers in datapath Greg Kroah-Hartman (2): staging: greybus: audio_helper: remove unused and wrong debugfs usage selinux: use "grep -E" instead of "egrep" Guilherme G. Piccoli (1): firmware: google: Test spinlock on panic path to avoid lockups Haibo Chen (1): ARM: dts: imx7d-sdb: config the max pressure for tsc2046 Hangyu Hua (1): misc: ocxl: fix possible refcount leak in afu_ioctl() Hans de Goede (3): platform/x86: msi-laptop: Fix old-ec check for backlight registering platform/x86: msi-laptop: Fix resource cleanup platform/x86: msi-laptop: Change DMI match / alias strings to fix module autoloading Hari Chandrakanthan (1): wifi: mac80211: allow bw change during channel switch in mesh Helge Deller (1): parisc: fbdev/stifb: Align graphics memory size to 4MB Huacai Chen (1): UM: cpuinfo: Fix a warning for CONFIG_CPUMASK_OFFSTACK Hui Tang (1): crypto: qat - fix use of 'dma_map_single' Ian Nam (1): clk: zynqmp: Fix stack-out-of-bounds in strncpy` Ian Rogers (1): selftests/xsk: Avoid use-after-free on ctx Ignat Korchagin (1): crypto: akcipher - default implementation for setting a private key Ilpo Järvinen (1): serial: 8250: Toggle IER bits on only after irq has been set up Jack Wang (2): HSI: omap_ssi_port: Fix dma_map_sg error check mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg Jaegeuk Kim (1): f2fs: increase the limit for reserve_root Jairaj Arava (1): ASoC: SOF: pci: Change DMI match info to support all Chrome platforms Jameson Thies (1): platform/chrome: cros_ec: Notify the PM of wake events during resume Jan Kara (1): ext4: avoid crash when inline data creation follows DIO write Janis Schoetterl-Glausch (1): kbuild: rpm-pkg: fix breakage when V=1 is used Javier Martinez Canillas (2): drm: Use size_t type for len variable in drm_copy_field() drm: Prevent drm_copy_field() to attempt copying a NULL pointer Jean-Francois Le Fillatre (1): usb: add quirks for Lenovo OneLink+ Dock Jerry Lee 李修賢 (1): ext4: continue to expand file system when the target size doesn't reach Jesus Fernandez Manzano (1): wifi: ath11k: fix number of VHT beamformee spatial streams Jianglei Nie (3): drm/nouveau: fix a use-after-free in nouveau_gem_prime_import_sg_table() drm/nouveau/nouveau_bo: fix potential memory leak in nouveau_bo_alloc() usb: host: xhci: Fix potential memory leak in xhci_alloc_stream_info() Jiasheng Jiang (3): ASoC: rsnd: Add check for rsnd_mod_power_on fsi: core: Check error number after calling ida_simple_get mfd: sm501: Add check for platform_driver_register() Jie Hai (3): dmaengine: hisilicon: Disable channels when unregister hisi_dma dmaengine: hisilicon: Fix CQ head update dmaengine: hisilicon: Add multi-thread support for a DMA channel Jim Cromie (4): dyndbg: fix static_branch manipulation dyndbg: fix module.dyndbg handling dyndbg: let query-modname override actual module name dyndbg: drop EXPORTed dynamic_debug_exec_queries Jinke Han (1): ext4: place buffer head allocation before handle start Joel Stanley (1): clk: ast2600: BCLK comes from EPLL Jonathan Cameron (1): iio: ABI: Fix wrong format of differential capacitance channel ABI. Junichi Uekawa (1): vhost/vsock: Use kvmalloc/kvfree for larger packets. Justin Chen (2): usb: host: xhci-plat: suspend and resume clocks usb: host: xhci-plat: suspend/resume clks for brcm Kees Cook (7): hardening: Clarify Kconfig text for auto-var-init hardening: Avoid harmless Clang option under CONFIG_INIT_STACK_ALL_ZERO hardening: Remove Clang's enable flag for -ftrivial-auto-var-init=zero sh: machvec: Use char[] for section boundaries x86/microcode/AMD: Track patch allocation size explicitly MIPS: BCM47XX: Cast memcmp() of function to (void *) x86/entry: Work around Clang __bdos() bug Keith Busch (1): nvme: copy firmware_rev on each init Khaled Almahallawy (1): drm/dp: Don't rewrite link config when setting phy test pattern Khalid Masum (1): xfrm: Update ipcomp_scratches with NULL when freed Koba Ko (1): crypto: ccp - Release dma channels before dmaengine unrgister Kohei Tarumizu (1): x86/resctrl: Fix to restore to original value when re-enabling hardware prefetch register Krzysztof Kozlowski (2): ASoC: wcd9335: fix order of Slimbus unprepare/disable ASoC: wcd934x: fix order of Slimbus unprepare/disable Kshitiz Varshney (1): hwrng: imx-rngc - Moving IRQ handler registering after imx_rngc_irq_mask_clear() Kuogee Hsieh (1): drm/msm/dp: correct 1.62G link rate at dp_catalog_ctrl_config_msa() Lalith Rajendran (1): ext4: make ext4_lazyinit_thread freezable Lam Thai (1): bpftool: Fix a wrong type cast in btf_dumper_int Lee Jones (1): bpf: Ensure correct locking around vulnerable function find_vpid() Letu Ren (1): scsi: 3w-9xxx: Avoid disabling device if failing to enable it Liang He (17): hwmon: (gsc-hwmon) Call of_node_get() before of_find_xxx API drm:pl111: Add of_node_put() when breaking out of for_each_available_child_of_node() drm/omap: dss: Fix refcount leak bugs ASoC: eureka-tlv320: Hold reference returned from of_find_xxx API memory: pl353-smc: Fix refcount leak bug in pl353_smc_probe() memory: of: Fix refcount leak bug in of_get_ddr_timings() memory: of: Fix refcount leak bug in of_lpddr3_get_ddr_timings() soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe() soc: qcom: smem_state: Add refcounting for the 'state->of_node' clk: meson: Hold reference returned by of_get_parent() clk: oxnas: Hold reference returned by of_get_parent() clk: qoriq: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: sprd: Hold reference returned by of_get_parent() media: exynos4-is: fimc-is: Add of_node_put() when breaking out of loop powerpc/sysdev/fsl_msi: Add missing of_node_put() powerpc/pci_dn: Add missing of_node_put() Lin Yujun (1): MIPS: SGI-IP27: Fix platform-device leak in bridge_platform_create() Linus Walleij (1): regulator: qcom_rpm: Fix circular deferral regression Liu Jian (1): net: If sock is dead don't access sock's sk_wq in sk_stream_wait_memory Logan Gunthorpe (2): md/raid5: Ensure stripe_fill happens on non-read IO with journal md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d Lorenz Bauer (1): bpf: btf: fix truncated last_member_type_id in btf_struct_resolve Lucas Stach (1): drm: bridge: dw_hdmi: only trigger hotplug event on link change Luciano Leão (1): x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype Luiz Augusto von Dentz (3): Bluetooth: hci_core: Fix not handling link timeouts propertly Bluetooth: hci_sysfs: Fix attempting to call device_add multiple times Bluetooth: L2CAP: Fix user-after-free Lukas Czerner (1): ext4: don't increase iversion counter for ea_inodes Luke D. Jones (2): ALSA: hda/realtek: Correct pin configs for ASUS G533Z ALSA: hda/realtek: Add quirk for ASUS GV601R laptop Lyude Paul (1): drm/nouveau/kms/nv140-: Disable interlacing Maciej W. Rozycki (2): RISC-V: Make port I/O string accessors actually work PCI: Sanitise firmware BAR assignments behind a PCI-PCI bridge Marek Behún (1): ARM: dts: turris-omnia: Fix mpp26 pin name and comment Marek Szyprowski (1): spi: Ensure that sg_table won't be used after being freed Mario Limonciello (2): thunderbolt: Explicitly enable lane adapter hotplug events at startup xhci: Don't show warning for reinit on known broken suspend Mark Brown (1): kselftest/arm64: Fix validatation termination record after EXTRA_CONTEXT Mark Chen (1): Bluetooth: btusb: Fine-tune mt7663 mechanism. Mark Zhang (1): RDMA/cm: Use SLID in the work completion as the DLID in responder side Martin Liska (1): gcov: support GCC 12.1 and newer compilers Martin Povišer (3): ASoC: tas2764: Allow mono streams ASoC: tas2764: Drop conflicting set_bias_level power setting ASoC: tas2764: Fix mute/unmute Masahiro Yamada (1): kbuild: remove the target in signal traps when interrupted Mateusz Kwiatkowski (1): drm/vc4: vec: Fix timings for VEC modes Maxime Ripard (2): drm/mipi-dsi: Detach devices when removing the host clk: bcm2835: Make peripheral PLLC critical Maya Matuszczyk (1): drm: panel-orientation-quirks: Add quirk for Anbernic Win600 Miaoqian Lin (6): clk: tegra: Fix refcount leak in tegra210_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra20: Fix refcount leak in tegra20_clock_init HSI: omap_ssi: Fix refcount leak in ssi_probe media: xilinx: vipp: Fix refcount leak in xvip_graph_dma_init clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe Michael Hennerich (1): iio: dac: ad5593r: Fix i2c read protocol requirements Michael Walle (2): ARM: dts: kirkwood: lsxl: fix serial line ARM: dts: kirkwood: lsxl: remove first ethernet port Michal Hocko (1): rcu: Back off upon fill_page_cache_func() allocation failure Michal Luczaj (1): KVM: x86/emulator: Fix handing of POP SS to correctly set interruptibility Mike Christie (1): scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername() Mike Pattrick (2): openvswitch: Fix double reporting of drops in dropwatch openvswitch: Fix overreporting of drops in dropwatch Nam Cao (2): staging: vt6655: fix some erroneous memory clean-up loops staging: vt6655: fix potential memory leak Nathan Chancellor (1): powerpc/math_emu/efp: Include module.h Neal Cardwell (1): tcp: fix tcp_cwnd_validate() to not forget is_cwnd_limited Neil Armstrong (1): spi: meson-spicc: do not rely on busy flag in pow2 clk ops Nicholas Piggin (1): powerpc/64s: Fix GENERIC_CPU build flags for PPC970 / G5 Niklas Cassel (4): ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting() ata: fix ata_id_has_devslp() ata: fix ata_id_has_ncq_autosense() ata: fix ata_id_has_dipm() Nuno Sá (2): iio: adc: ad7923: fix channel readings for some variants iio: inkern: only release the device node when done with it Ondrej Mosnacek (1): userfaultfd: open userfaultfds with O_RDONLY Pali Rohár (4): powerpc/boot: Explicitly disable usage of SPE instructions mtd: rawnand: fsl_elbc: Fix none ECC mode serial: 8250: Fix restoring termios speed after suspend powerpc: Fix SPE Power ISA properties for e500v1 platforms Patrick Rudolph (1): regulator: core: Prevent integer underflow Patryk Duda (1): platform/chrome: cros_ec_proto: Update version on GET_NEXT_EVENT failure Pavel Begunkov (1): io_uring/af_unix: defer registered files gc to io_uring release Peter Harliman Liem (1): crypto: inside-secure - Change swab to swab32 Phil Sutter (1): netfilter: nft_fib: Fix for rpath check with VRF devices Pierre-Louis Bossart (1): soundwire: intel: fix error handling on dai registration issues Qu Wenruo (1): btrfs: scrub: try to fix super block errors Quanyang Wang (1): clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate Quentin Monnet (1): bpftool: Clear errno after libcap's checks Rafael J. Wysocki (1): thermal: intel_powerclamp: Use first online CPU as control_cpu Randy Dunlap (2): drm: fix drm_mipi_dbi build errors ia64: export memory_add_physaddr_to_nid to fix cxl build error Richard Acayan (1): mmc: sdhci-msm: add compatible string check for sdm670 Richard Fitzgerald (1): soundwire: cadence: Don't overwrite msg->buf during write commands Rik van Riel (1): livepatch: fix race between fork and KLP transition Rishabh Bhatnagar (1): nvme-pci: set min_align_mask before calculating max_hw_sectors Robert Marko (1): clk: qcom: apss-ipq6018: mark apcs_alias0_core_clk as critical Robin Guo (1): usb: musb: Fix musb_gadget.c rxstate overflow bug Robin Murphy (1): iommu/iova: Fix module config properly Ronnie Sahlberg (1): cifs: destage dirty pages before re-reading them for cache=none Rustam Subkhankulov (1): platform/chrome: fix double-free in chromeos_laptop_prepare() Sami Tolvanen (1): objtool: Preserve special st_shndx indexes in elf_update_symbol Saranya Gopal (1): ALSA: hda/realtek: Add Intel Reference SSID to support headset keys Saurabh Sengar (1): md: Replace snprintf with scnprintf Saurav Kashyap (1): scsi: qedf: Populate sysfs attributes for vport Sean Christopherson (2): KVM: nVMX: Unconditionally purge queued/injected events on nested "exit" KVM: VMX: Drop bits 31:16 when shoving exception error code into VMCS Sean Wang (1): Bluetooth: btusb: mediatek: fix WMT failure during runtime suspend Sebastian Krzyszkowiak (1): arm64: dts: imx8mq-librem5: Add bq25895 as max17055's power supply Serge Semin (5): clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD clk: baikal-t1: Fix invalid xGMAC PTP clock divider clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent clk: baikal-t1: Add SATA internal ref clock buffer ata: libahci_platform: Sanity check the DT child nodes number Sherry Sun (1): tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown Shigeru Yoshida (1): nbd: Fix hung when signal interrupts nbd_start_device_ioctl() Shuah Khan (2): Revert "drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega" Revert "drm/amdgpu: use dirty framebuffer helper" Shuai Xue (1): ACPI: APEI: do not add task_work to kernel thread to avoid memory leak Shubhrajyoti Datta (1): tty: xilinx_uartps: Fix the ignore_status Simon Ser (1): drm/dp_mst: fix drm_dp_dpcd_read return value checks Srinivas Pandruvada (1): thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash Stefan Berger (1): selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle Stefan Wahren (1): clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration Steve French (1): smb3: must initialize two ACL struct fields to zero Steven Rostedt (Google) (4): ring-buffer: Allow splice to read previous partially read pages ring-buffer: Have the shortest_full queue be the shortest not longest ring-buffer: Check pending waiters when doing wake ups as well ring-buffer: Add ring_buffer_wake_waiters() Takashi Iwai (7): ALSA: oss: Fix potential deadlock at unregistration ALSA: rawmidi: Drop register_mutex in snd_rawmidi_free() ALSA: usb-audio: Fix potential memory leaks ALSA: usb-audio: Fix NULL dererence at error path drm/udl: Restore display mode on resume ALSA: hda: beep: Simplify keep-power-at-enable behavior ALSA: hda/hdmi: Don't skip notification handling during PM operation Tetsuo Handa (6): Bluetooth: hci_{ldisc,serdev}: check percpu_init_rwsem() failure net: rds: don't hold sock lock when cancelling work from rds_tcp_reset_callbacks() net/ieee802154: reject zero-sized raw_sendmsg() wifi: ath9k: avoid uninit memory read in ath9k_htc_rx_msg() Bluetooth: L2CAP: initialize delayed works at l2cap_chan_create() net/ieee802154: don't warn zero-sized raw_sendmsg() Thinh Nguyen (3): usb: ch9: Add USB 3.2 SSP attributes usb: common: Parse for USB SSP genXxY usb: common: debug: Check non-standard control requests Tudor Ambarus (1): mtd: rawnand: atmel: Unmap streaming DMA mappings Uwe Kleine-König (2): iio: ltc2497: Fix reading conversion results leds: lm3601x: Don't use mutex after it was destroyed Varun Prakash (1): nvmet-tcp: add bounds check on Transfer Tag Ville Syrjälä (2): drm/i915: Fix watermark calculations for gen12+ RC CCS modifier drm/i915: Fix watermark calculations for gen12+ MC CCS modifier Vincent Knecht (1): thermal/drivers/qcom/tsens-v0_1: Fix MSM8939 fourth sensor hw_id Vincent Whitchurch (1): spi: s3c64xx: Fix large transfers with DMA Vitaly Kuznetsov (1): x86/hyperv: Fix 'struct hv_enlightened_vmcs' definition Vivek Kasireddy (1): udmabuf: Set ubuf->sg = NULL if the creation of sg table fails Waiman Long (2): tracing: Disable interrupt or preemption before acquiring arch_spinlock_t cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset Wang Kefeng (2): ARM: 9244/1: dump: Fix wrong pg_level in walk_pmd() ARM: 9247/1: mm: set readonly for MT_MEMORY_RO with ARM_LPAE Wei Yongjun (1): power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type() Wen Gong (1): wifi: ath10k: add peer map clean up for peer delete in ath10k_sta_state() Wenchao Chen (1): mmc: sdhci-sprd: Fix minimum clock limit William Dean (1): mtd: devices: docg3: check the return value of devm_ioremap() in the probe Wright Feng (1): wifi: brcmfmac: fix invalid address access when enabling SCAN log level Xiaoke Wang (1): staging: rtl8723bs: fix a potential memory leak in rtw_init_cmd_priv() Xin Long (1): sctp: handle the error returned from sctp_auth_asoc_init_active_key Xu Qiang (3): spi: qup: add missing clk_disable_unprepare on error in spi_qup_resume() spi: qup: add missing clk_disable_unprepare on error in spi_qup_pm_resume_runtime() media: meson: vdec: add missing clk_disable_unprepare on error in vdec_hevc_start() Ye Bin (7): jbd2: fix potential buffer head reference count leak jbd2: fix potential use-after-free in jbd2_fc_wait_bufs jbd2: add miss release buffer head in fc_do_one_pass() ext4: fix miss release buffer head in ext4_fc_write_inode ext4: fix potential memory leak in ext4_fc_record_modified_inode() ext4: fix potential memory leak in ext4_fc_record_regions() ext4: update 'state->fc_regions_size' after successful memory allocation Yipeng Zou (2): tracing: kprobe: Fix kprobe event gen test module on exit tracing: kprobe: Make gen test module work in arm and riscv Yu Kuai (1): blk-throttle: prevent overflow while calculating wait time Zeng Jingxiang (1): gpu: lontium-lt9611: Fix NULL pointer dereference in lt9611_connector_init() Zhang Qilong (7): spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe ASoC: wm8997: Fix PM disable depth imbalance in wm8997_probe ASoC: wm5110: Fix PM disable depth imbalance in wm5110_probe ASoC: wm5102: Fix PM disable depth imbalance in wm5102_probe ASoC: mt6660: Fix PM disable depth imbalance in mt6660_i2c_probe f2fs: fix race condition on setting FI_NO_EXTENT flag Zhang Rui (1): powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain Zhang Xiaoxu (1): cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message Zheng Yejian (1): ftrace: Properly unset FTRACE_HASH_FL_MOD Zheng Yongjun (2): net: fs_enet: Fix wrong check in do_pd_setup powerpc/powernv: add missing of_node_put() in opal_export_attrs() Zhengchao Shao (1): crypto: sahara - don't sleep when in softirq Zheyu Ma (2): drm/bridge: megachips: Fix a null pointer dereference bug media: cx88: Fix a null-ptr-deref bug in buffer_prepare() Zhu Yanjun (2): RDMA/rxe: Fix "kernel NULL pointer dereference" error RDMA/rxe: Fix the error caused by qp->sk Ziyang Xuan (1): can: bcm: check the result of can_send() in bcm_can_tx() Zqiang (1): rcu-tasks: Convert RCU_LOCKDEP_WARN() to WARN_ONCE() hongao (1): drm/amdgpu: fix initial connector audio value sunghwan jung (1): Revert "usb: storage: Add quirk for Samsung Fit flash" Documentation/ABI/testing/sysfs-bus-iio | 2 +- Makefile | 6 +- arch/arm/Kconfig | 1 - arch/arm/boot/dts/armada-385-turris-omnia.dts | 4 +- arch/arm/boot/dts/exynos4412-midas.dtsi | 2 +- arch/arm/boot/dts/exynos4412-origen.dts | 2 +- arch/arm/boot/dts/imx6dl.dtsi | 3 + arch/arm/boot/dts/imx6q.dtsi | 3 + arch/arm/boot/dts/imx6qp.dtsi | 6 + arch/arm/boot/dts/imx6sl.dtsi | 3 + arch/arm/boot/dts/imx6sll.dtsi | 3 + arch/arm/boot/dts/imx6sx.dtsi | 6 + arch/arm/boot/dts/imx7d-sdb.dts | 7 +- arch/arm/boot/dts/kirkwood-lsxl.dtsi | 16 +- arch/arm/mm/dump.c | 2 +- arch/arm/mm/mmu.c | 4 + .../boot/dts/freescale/imx8mq-librem5.dtsi | 1 + arch/ia64/mm/numa.c | 1 + arch/mips/bcm47xx/prom.c | 4 +- arch/mips/sgi-ip27/ip27-xtalk.c | 74 +++-- arch/powerpc/Makefile | 2 +- arch/powerpc/boot/Makefile | 1 + .../boot/dts/fsl/e500v1_power_isa.dtsi | 51 ++++ arch/powerpc/boot/dts/fsl/mpc8540ads.dts | 2 +- arch/powerpc/boot/dts/fsl/mpc8541cds.dts | 2 +- arch/powerpc/boot/dts/fsl/mpc8555cds.dts | 2 +- arch/powerpc/boot/dts/fsl/mpc8560ads.dts | 2 +- arch/powerpc/kernel/pci_dn.c | 1 + arch/powerpc/math-emu/math_efp.c | 1 + arch/powerpc/platforms/powernv/opal.c | 1 + arch/powerpc/sysdev/fsl_msi.c | 2 + arch/riscv/Makefile | 2 + arch/riscv/include/asm/io.h | 16 +- arch/riscv/kernel/sys_riscv.c | 3 - arch/riscv/mm/fault.c | 3 +- arch/sh/include/asm/sections.h | 2 +- arch/sh/kernel/machvec.c | 10 +- arch/um/kernel/um_arch.c | 2 +- arch/x86/include/asm/hyperv-tlfs.h | 4 +- arch/x86/include/asm/microcode.h | 1 + arch/x86/kernel/cpu/feat_ctl.c | 2 +- arch/x86/kernel/cpu/microcode/amd.c | 3 +- arch/x86/kernel/cpu/resctrl/pseudo_lock.c | 12 +- arch/x86/kvm/emulate.c | 2 +- arch/x86/kvm/vmx/nested.c | 30 +- arch/x86/kvm/vmx/vmx.c | 12 +- arch/x86/xen/enlighten_pv.c | 3 +- block/blk-throttle.c | 8 +- crypto/akcipher.c | 8 + drivers/acpi/acpi_video.c | 16 ++ drivers/acpi/apei/ghes.c | 2 +- drivers/ata/libahci_platform.c | 14 +- drivers/block/nbd.c | 6 +- drivers/bluetooth/btusb.c | 47 +++- drivers/bluetooth/hci_ldisc.c | 7 +- drivers/bluetooth/hci_serdev.c | 10 +- drivers/char/hw_random/imx-rngc.c | 14 +- drivers/clk/baikal-t1/ccu-div.c | 65 +++++ drivers/clk/baikal-t1/ccu-div.h | 10 + drivers/clk/baikal-t1/clk-ccu-div.c | 26 +- drivers/clk/bcm/clk-bcm2835.c | 8 +- drivers/clk/berlin/bg2.c | 5 +- drivers/clk/berlin/bg2q.c | 6 +- drivers/clk/clk-ast2600.c | 2 +- drivers/clk/clk-oxnas.c | 6 +- drivers/clk/clk-qoriq.c | 10 +- drivers/clk/clk-versaclock5.c | 2 +- drivers/clk/mediatek/clk-mt8183-mfgcfg.c | 6 +- drivers/clk/meson/meson-aoclk.c | 5 +- drivers/clk/meson/meson-eeclk.c | 5 +- drivers/clk/meson/meson8b.c | 5 +- drivers/clk/qcom/apss-ipq6018.c | 2 +- drivers/clk/sprd/common.c | 9 +- drivers/clk/tegra/clk-tegra114.c | 1 + drivers/clk/tegra/clk-tegra20.c | 1 + drivers/clk/tegra/clk-tegra210.c | 1 + drivers/clk/ti/clk-dra7-atl.c | 9 +- drivers/clk/zynqmp/clkc.c | 7 + drivers/clk/zynqmp/pll.c | 31 +-- drivers/crypto/cavium/cpt/cptpf_main.c | 6 +- drivers/crypto/ccp/ccp-dmaengine.c | 6 +- drivers/crypto/inside-secure/safexcel_hash.c | 8 +- .../crypto/marvell/octeontx/otx_cptpf_ucode.c | 18 +- drivers/crypto/qat/qat_common/qat_algs.c | 109 +++++--- drivers/crypto/qat/qat_common/qat_crypto.h | 24 ++ drivers/crypto/sahara.c | 18 +- drivers/dma-buf/udmabuf.c | 9 +- drivers/dma/hisi_dma.c | 28 +- drivers/dma/ioat/dma.c | 6 +- drivers/firmware/efi/libstub/fdt.c | 8 - drivers/firmware/google/gsmi.c | 9 + drivers/fpga/dfl.c | 2 +- drivers/fsi/fsi-core.c | 3 + drivers/gpu/drm/Kconfig | 1 + .../gpu/drm/amd/amdgpu/amdgpu_connectors.c | 7 +- drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 14 +- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 2 - drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 5 - drivers/gpu/drm/amd/amdgpu/soc15.c | 25 ++ .../gpu/drm/amd/display/dc/calcs/bw_fixed.c | 6 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 16 +- drivers/gpu/drm/amd/display/dc/dc_stream.h | 6 +- .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 35 +-- .../amd/display/dc/dcn10/dcn10_hw_sequencer.h | 3 +- .../gpu/drm/amd/display/dc/inc/hw_sequencer.h | 8 +- drivers/gpu/drm/bridge/adv7511/adv7511.h | 5 +- drivers/gpu/drm/bridge/adv7511/adv7511_cec.c | 4 +- drivers/gpu/drm/bridge/lontium-lt9611.c | 3 +- .../bridge/megachips-stdpxxxx-ge-b850v3-fw.c | 4 +- drivers/gpu/drm/bridge/parade-ps8640.c | 4 +- drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 13 +- drivers/gpu/drm/drm_bridge.c | 4 +- drivers/gpu/drm/drm_dp_helper.c | 9 - drivers/gpu/drm/drm_dp_mst_topology.c | 6 +- drivers/gpu/drm/drm_ioctl.c | 8 +- drivers/gpu/drm/drm_mipi_dsi.c | 1 + .../gpu/drm/drm_panel_orientation_quirks.c | 6 + drivers/gpu/drm/i915/intel_pm.c | 8 +- drivers/gpu/drm/meson/meson_drv.c | 8 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 12 +- drivers/gpu/drm/msm/disp/dpu1/dpu_vbif.c | 29 +- drivers/gpu/drm/msm/dp/dp_catalog.c | 2 +- drivers/gpu/drm/nouveau/nouveau_bo.c | 4 +- drivers/gpu/drm/nouveau/nouveau_connector.c | 3 +- drivers/gpu/drm/nouveau/nouveau_prime.c | 1 - drivers/gpu/drm/omapdrm/dss/dss.c | 3 + drivers/gpu/drm/pl111/pl111_versatile.c | 1 + drivers/gpu/drm/udl/udl_modeset.c | 3 - drivers/gpu/drm/vc4/vc4_vec.c | 4 +- drivers/gpu/drm/virtio/virtgpu_vq.c | 2 +- drivers/hid/hid-multitouch.c | 8 +- drivers/hsi/controllers/omap_ssi_core.c | 1 + drivers/hsi/controllers/omap_ssi_port.c | 8 +- drivers/hwmon/gsc-hwmon.c | 1 + drivers/i2c/busses/i2c-mlxbf.c | 44 ++- drivers/iio/adc/ad7923.c | 4 +- drivers/iio/adc/at91-sama5d2_adc.c | 28 +- drivers/iio/adc/ltc2497.c | 13 + drivers/iio/dac/ad5593r.c | 46 +-- drivers/iio/inkern.c | 6 +- drivers/iio/pressure/dps310.c | 262 +++++++++++------- drivers/infiniband/core/cm.c | 14 +- drivers/infiniband/core/uverbs_cmd.c | 5 +- drivers/infiniband/core/verbs.c | 2 + drivers/infiniband/hw/hns/hns_roce_mr.c | 1 - drivers/infiniband/hw/mlx4/mr.c | 1 - drivers/infiniband/sw/rxe/rxe_qp.c | 10 +- drivers/infiniband/sw/siw/siw_qp_rx.c | 27 +- drivers/iommu/omap-iommu-debug.c | 6 +- drivers/leds/leds-lm3601x.c | 2 - drivers/mailbox/bcm-flexrm-mailbox.c | 8 +- drivers/md/bcache/writeback.c | 73 +++-- drivers/md/raid0.c | 2 +- drivers/md/raid5.c | 14 +- drivers/media/pci/cx88/cx88-vbi.c | 9 +- drivers/media/pci/cx88/cx88-video.c | 43 +-- drivers/media/platform/exynos4-is/fimc-is.c | 1 + drivers/media/platform/xilinx/xilinx-vipp.c | 9 +- drivers/memory/of_memory.c | 2 + drivers/memory/pl353-smc.c | 1 + drivers/mfd/fsl-imx25-tsadc.c | 34 ++- drivers/mfd/intel_soc_pmic_core.c | 1 + drivers/mfd/lp8788-irq.c | 3 + drivers/mfd/lp8788.c | 12 +- drivers/mfd/sm501.c | 7 +- drivers/misc/ocxl/file.c | 2 + drivers/mmc/host/au1xmmc.c | 3 +- drivers/mmc/host/sdhci-msm.c | 1 + drivers/mmc/host/sdhci-sprd.c | 2 +- drivers/mmc/host/wmt-sdmmc.c | 5 +- drivers/mtd/devices/docg3.c | 7 +- drivers/mtd/nand/raw/atmel/nand-controller.c | 1 + drivers/mtd/nand/raw/fsl_elbc_nand.c | 28 +- drivers/mtd/nand/raw/meson_nand.c | 4 +- drivers/net/can/usb/kvaser_usb/kvaser_usb.h | 2 + .../net/can/usb/kvaser_usb/kvaser_usb_core.c | 3 +- .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c | 2 +- .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c | 79 ++++++ .../net/ethernet/freescale/fs_enet/mac-fec.c | 2 +- drivers/net/wireless/ath/ath10k/mac.c | 54 ++-- drivers/net/wireless/ath/ath11k/mac.c | 25 +- drivers/net/wireless/ath/ath9k/htc_hst.c | 43 ++- .../broadcom/brcm80211/brcmfmac/core.c | 3 +- .../broadcom/brcm80211/brcmfmac/pno.c | 12 +- .../net/wireless/ralink/rt2x00/rt2800lib.c | 34 ++- .../wireless/realtek/rtl8xxxu/rtl8xxxu_core.c | 75 ++++- drivers/nvme/host/core.c | 3 +- drivers/nvme/host/pci.c | 3 +- drivers/nvme/target/tcp.c | 11 +- drivers/pci/setup-res.c | 11 + drivers/phy/qualcomm/phy-qcom-usb-hsic.c | 6 +- drivers/platform/chrome/chromeos_laptop.c | 24 +- drivers/platform/chrome/cros_ec.c | 8 +- drivers/platform/chrome/cros_ec_chardev.c | 3 + drivers/platform/chrome/cros_ec_proto.c | 32 +++ drivers/platform/x86/msi-laptop.c | 14 +- drivers/power/supply/adp5061.c | 6 +- drivers/powercap/intel_rapl_common.c | 4 +- drivers/regulator/core.c | 2 +- drivers/regulator/qcom_rpm-regulator.c | 24 +- drivers/scsi/3w-9xxx.c | 2 +- drivers/scsi/iscsi_tcp.c | 73 +++-- drivers/scsi/iscsi_tcp.h | 2 + drivers/scsi/libsas/sas_expander.c | 2 +- drivers/scsi/qedf/qedf_main.c | 21 ++ drivers/soc/qcom/smem_state.c | 3 +- drivers/soc/qcom/smsm.c | 20 +- drivers/soc/tegra/Kconfig | 1 - drivers/soundwire/cadence_master.c | 9 +- drivers/soundwire/intel.c | 1 - drivers/spi/spi-dw-bt1.c | 4 +- drivers/spi/spi-meson-spicc.c | 6 +- drivers/spi/spi-mt7621.c | 8 +- drivers/spi/spi-omap-100k.c | 1 + drivers/spi/spi-qup.c | 21 +- drivers/spi/spi-s3c64xx.c | 9 + drivers/spi/spi.c | 2 + drivers/spmi/spmi-pmic-arb.c | 13 +- drivers/staging/greybus/audio_helper.c | 11 - drivers/staging/media/meson/vdec/vdec_hevc.c | 6 +- drivers/staging/media/sunxi/cedrus/cedrus.c | 4 +- drivers/staging/rtl8723bs/core/rtw_cmd.c | 16 +- drivers/staging/vt6655/device_main.c | 8 +- drivers/thermal/intel/intel_powerclamp.c | 4 +- drivers/thermal/qcom/tsens-v0_1.c | 2 +- drivers/thunderbolt/switch.c | 24 ++ drivers/thunderbolt/tb.h | 1 + drivers/thunderbolt/tb_regs.h | 1 + drivers/thunderbolt/usb4.c | 20 ++ drivers/tty/serial/8250/8250_core.c | 19 +- drivers/tty/serial/8250/8250_port.c | 15 +- drivers/tty/serial/fsl_lpuart.c | 2 + drivers/tty/serial/jsm/jsm_driver.c | 3 +- drivers/tty/serial/xilinx_uartps.c | 2 + drivers/usb/common/common.c | 102 ++++++- drivers/usb/common/debug.c | 78 +++++- drivers/usb/core/devices.c | 21 +- drivers/usb/core/endpoint.c | 35 +-- drivers/usb/core/quirks.c | 4 + drivers/usb/gadget/function/f_printer.c | 12 +- drivers/usb/host/xhci-mem.c | 7 +- drivers/usb/host/xhci-plat.c | 18 +- drivers/usb/host/xhci.c | 3 +- drivers/usb/host/xhci.h | 1 + drivers/usb/misc/idmouse.c | 8 +- drivers/usb/musb/musb_gadget.c | 3 + drivers/usb/storage/unusual_devs.h | 6 - drivers/vhost/vsock.c | 2 +- drivers/video/fbdev/stifb.c | 2 +- fs/btrfs/qgroup.c | 15 + fs/btrfs/scrub.c | 36 +++ fs/cifs/file.c | 9 + fs/cifs/smb2pdu.c | 7 +- fs/dlm/ast.c | 6 +- fs/dlm/lock.c | 16 +- fs/ext4/fast_commit.c | 40 +-- fs/ext4/file.c | 6 + fs/ext4/inode.c | 14 +- fs/ext4/resize.c | 2 +- fs/ext4/super.c | 1 + fs/f2fs/checkpoint.c | 23 +- fs/f2fs/data.c | 4 +- fs/f2fs/extent_cache.c | 3 +- fs/f2fs/f2fs.h | 27 +- fs/f2fs/gc.c | 10 +- fs/f2fs/recovery.c | 23 +- fs/f2fs/segment.c | 47 ++-- fs/f2fs/super.c | 4 +- fs/jbd2/commit.c | 2 +- fs/jbd2/journal.c | 10 +- fs/jbd2/recovery.c | 1 + fs/jbd2/transaction.c | 6 +- fs/nfsd/nfs4recover.c | 4 +- fs/nfsd/nfs4state.c | 5 + fs/nfsd/nfs4xdr.c | 2 +- fs/userfaultfd.c | 4 +- include/linux/ata.h | 39 +-- include/linux/dynamic_debug.h | 11 +- include/linux/iova.h | 2 +- include/linux/once.h | 28 ++ include/linux/ring_buffer.h | 2 +- include/linux/serial_8250.h | 1 + include/linux/skbuff.h | 2 + include/linux/tcp.h | 2 +- include/linux/usb/ch9.h | 62 +---- include/net/ieee802154_netdev.h | 12 +- include/net/tcp.h | 5 +- include/uapi/linux/usb/ch9.h | 13 + kernel/bpf/btf.c | 2 +- kernel/bpf/syscall.c | 2 + kernel/cgroup/cpuset.c | 18 +- kernel/gcov/gcc_4_7.c | 18 +- kernel/livepatch/transition.c | 18 +- kernel/rcu/tasks.h | 2 +- kernel/rcu/tree.c | 17 +- kernel/trace/ftrace.c | 8 +- kernel/trace/kprobe_event_gen_test.c | 49 +++- kernel/trace/ring_buffer.c | 54 +++- kernel/trace/trace.c | 23 ++ lib/dynamic_debug.c | 45 +-- lib/once.c | 30 ++ mm/mmap.c | 5 +- net/bluetooth/hci_core.c | 34 ++- net/bluetooth/hci_sysfs.c | 3 + net/bluetooth/l2cap_core.c | 17 +- net/can/bcm.c | 7 +- net/core/stream.c | 3 +- net/ieee802154/socket.c | 4 + net/ipv4/inet_hashtables.c | 4 +- net/ipv4/netfilter/nft_fib_ipv4.c | 3 + net/ipv4/tcp.c | 16 +- net/ipv4/tcp_output.c | 19 +- net/ipv6/netfilter/nft_fib_ipv6.c | 6 +- net/mac80211/cfg.c | 3 - net/openvswitch/datapath.c | 18 +- net/rds/tcp.c | 2 +- net/sctp/auth.c | 18 +- net/vmw_vsock/virtio_transport_common.c | 2 +- net/xfrm/xfrm_ipcomp.c | 1 + scripts/Kbuild.include | 23 +- scripts/package/mkspec | 4 +- scripts/selinux/install_policy.sh | 2 +- security/Kconfig.hardening | 63 +++-- sound/core/pcm_dmaengine.c | 8 +- sound/core/rawmidi.c | 2 - sound/core/sound_oss.c | 13 +- sound/pci/hda/hda_beep.c | 15 +- sound/pci/hda/hda_beep.h | 1 + sound/pci/hda/patch_hdmi.c | 6 - sound/pci/hda/patch_realtek.c | 11 +- sound/pci/hda/patch_sigmatel.c | 25 +- sound/soc/codecs/da7219.c | 5 +- sound/soc/codecs/mt6660.c | 8 +- sound/soc/codecs/tas2764.c | 78 ++---- sound/soc/codecs/wcd9335.c | 2 +- sound/soc/codecs/wcd934x.c | 2 +- sound/soc/codecs/wm5102.c | 6 +- sound/soc/codecs/wm5110.c | 6 +- sound/soc/codecs/wm8997.c | 6 +- sound/soc/fsl/eukrea-tlv320.c | 8 +- sound/soc/sh/rcar/ctu.c | 6 +- sound/soc/sh/rcar/dvc.c | 6 +- sound/soc/sh/rcar/mix.c | 6 +- sound/soc/sh/rcar/src.c | 5 +- sound/soc/sh/rcar/ssi.c | 4 +- sound/soc/sof/sof-pci-dev.c | 2 +- sound/usb/endpoint.c | 6 +- tools/bpf/bpftool/btf_dumper.c | 2 +- tools/bpf/bpftool/main.c | 10 + tools/lib/bpf/xsk.c | 6 +- tools/objtool/elf.c | 7 +- tools/perf/util/intel-pt.c | 9 +- .../arm64/signal/testcases/testcases.c | 2 +- tools/testing/selftests/tpm2/tpm2.py | 4 + 354 files changed, 3018 insertions(+), 1399 deletions(-) create mode 100644 arch/powerpc/boot/dts/fsl/e500v1_power_isa.dtsi -- 2.25.1

1 371

[PATCH v2] eulerfs: fix wrong dereferencing in eufs_lookup
by Kang Chen 12 Apr '23

12 Apr '23

uniontech inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6TN56 CVE: NA -------------------------------- smatch report: fs/eulerfs/namei.c:118 eufs_lookup() error: 'inode' dereferencing possible ERR_PTR() fix it by using the ino above in eufs_err. Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- v2 -> v1: use correct string format fs/eulerfs/namei.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/eulerfs/namei.c b/fs/eulerfs/namei.c index e4c6c36575f2..dd3bbc0b453c 100644 --- a/fs/eulerfs/namei.c +++ b/fs/eulerfs/namei.c @@ -115,8 +115,8 @@ static struct dentry *eufs_lookup(struct inode *dir, struct dentry *dentry, inode = eufs_iget(dir->i_sb, s2p(dir->i_sb, de->inode)); if (inode == ERR_PTR(-ESTALE)) { - eufs_err(dir->i_sb, "deleted inode referenced: 0x%lx", - inode->i_ino); + eufs_err(dir->i_sb, "deleted inode referenced: 0x%llx", + le64_to_cpu(de->inode)); return ERR_PTR(-EIO); } not_found: -- 2.34.1

3 7

[PATCH rdma-core v4 0/2] Support congestion control algorithm
by Chengchang Tang 12 Apr '23

12 Apr '23

From: Juan Zhou <zhoujuan51(a)h-partners.com> Yixing Liu (2): Update kernel headers libhns: Support congestion control algorithm configuration kernel-headers/rdma/hns-abi.h | 18 ++++- providers/hns/hns_roce_u.c | 1 + providers/hns/hns_roce_u.h | 6 ++ providers/hns/hns_roce_u_verbs.c | 114 +++++++++++++++++++++++++++++-- providers/hns/hnsdv.h | 24 ++++++- providers/hns/libhns.map | 1 + 6 files changed, 156 insertions(+), 8 deletions(-) -- 2.30.0

1 2

[OLK-5.10 v5 0/2] Support congestion control algorithm
by Chengchang Tang 12 Apr '23

12 Apr '23

From: Juan Zhou <zhoujuan51(a)h-partners.com> This group of patches implements the congestion control algorithm configuration. Yixing Liu (2): RDMA/hns: Modify congestion abbreviation RDMA/hns: Support congestion control algorithm configuration at QP granularity drivers/infiniband/hw/hns/hns_roce_device.h | 16 +-- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 113 ++++++++++---------- drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 11 +- drivers/infiniband/hw/hns/hns_roce_main.c | 4 + drivers/infiniband/hw/hns/hns_roce_qp.c | 46 ++++++++ drivers/infiniband/hw/hns/hns_roce_sysfs.c | 2 +- include/uapi/rdma/hns-abi.h | 18 +++- 7 files changed, 142 insertions(+), 68 deletions(-) -- 2.30.0

1 2

[PATCH openEuler-5.10-LTS 01/27] xfs: log worker needs to start before intent/unlink recovery
by Jialin Zhang 12 Apr '23

12 Apr '23

From: Dave Chinner <dchinner(a)redhat.com> mainline inclusion from mainline-v5.17-rc6 commit a9a4bc8c76d747aa40b30e2dfc176c781f353a08 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4KIAO CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- After 963 iterations of generic/530, it deadlocked during recovery on a pinned inode cluster buffer like so: XFS (pmem1): Starting recovery (logdev: internal) INFO: task kworker/8:0:306037 blocked for more than 122 seconds. Not tainted 5.17.0-rc6-dgc+ #975 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:0 state:D stack:13024 pid:306037 ppid: 2 flags:0x00004000 Workqueue: xfs-inodegc/pmem1 xfs_inodegc_worker Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 schedule_timeout+0x114/0x160 __down+0x99/0xf0 down+0x5e/0x70 xfs_buf_lock+0x36/0xf0 xfs_buf_find+0x418/0x850 xfs_buf_get_map+0x47/0x380 xfs_buf_read_map+0x54/0x240 xfs_trans_read_buf_map+0x1bd/0x490 xfs_imap_to_bp+0x4f/0x70 xfs_iunlink_map_ino+0x66/0xd0 xfs_iunlink_map_prev.constprop.0+0x148/0x2f0 xfs_iunlink_remove_inode+0xf2/0x1d0 xfs_inactive_ifree+0x1a3/0x900 xfs_inode_unlink+0xcc/0x210 xfs_inodegc_worker+0x1ac/0x2f0 process_one_work+0x1ac/0x390 worker_thread+0x56/0x3c0 kthread+0xf6/0x120 ret_from_fork+0x1f/0x30 </TASK> task:mount state:D stack:13248 pid:324509 ppid:324233 flags:0x00004000 Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 schedule_timeout+0x114/0x160 __down+0x99/0xf0 down+0x5e/0x70 xfs_buf_lock+0x36/0xf0 xfs_buf_find+0x418/0x850 xfs_buf_get_map+0x47/0x380 xfs_buf_read_map+0x54/0x240 xfs_trans_read_buf_map+0x1bd/0x490 xfs_imap_to_bp+0x4f/0x70 xfs_iget+0x300/0xb40 xlog_recover_process_one_iunlink+0x4c/0x170 xlog_recover_process_iunlinks.isra.0+0xee/0x130 xlog_recover_finish+0x57/0x110 xfs_log_mount_finish+0xfc/0x1e0 xfs_mountfs+0x540/0x910 xfs_fs_fill_super+0x495/0x850 get_tree_bdev+0x171/0x270 xfs_fs_get_tree+0x15/0x20 vfs_get_tree+0x24/0xc0 path_mount+0x304/0xba0 __x64_sys_mount+0x108/0x140 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000 Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 io_schedule+0x4b/0x80 xfs_buf_wait_unpin+0x9e/0xf0 __xfs_buf_submit+0x14a/0x230 xfs_buf_delwri_submit_buffers+0x107/0x280 xfs_buf_delwri_submit_nowait+0x10/0x20 xfsaild+0x27e/0x9d0 kthread+0xf6/0x120 ret_from_fork+0x1f/0x30 We have the mount process waiting on an inode cluster buffer read, inodegc doing unlink waiting on the same inode cluster buffer, and the AIL push thread blocked in writeback waiting for the inode cluster buffer to become unpinned. What has happened here is that the AIL push thread has raced with the inodegc process modifying, committing and pinning the inode cluster buffer here in xfs_buf_delwri_submit_buffers() here: blk_start_plug(&plug); list_for_each_entry_safe(bp, n, buffer_list, b_list) { if (!wait_list) { if (xfs_buf_ispinned(bp)) { pinned++; continue; } Here >>>>>> if (!xfs_buf_trylock(bp)) continue; Basically, the AIL has found the buffer wasn't pinned and got the lock without blocking, but then the buffer was pinned. This implies the processing here was pre-empted between the pin check and the lock, because the pin count can only be increased while holding the buffer locked. Hence when it has gone to submit the IO, it has blocked waiting for the buffer to be unpinned. With all executing threads now waiting on the buffer to be unpinned, we normally get out of situations like this via the background log worker issuing a log force which will unpinned stuck buffers like this. But at this point in recovery, we haven't started the log worker. In fact, the first thing we do after processing intents and unlinked inodes is *start the log worker*. IOWs, we start it too late to have it break deadlocks like this. Avoid this and any other similar deadlock vectors in intent and unlinked inode recovery by starting the log worker before we recover intents and unlinked inodes. This part of recovery runs as though the filesystem is fully active, so we really should have the same infrastructure running as we normally do at runtime. Signed-off-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Reviewed-by: Chandan Babu R <chandan.babu(a)oracle.com> Signed-off-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Long Li <leo.lilong(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- fs/xfs/xfs_log.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 92c5d6ef47d6..e154c0d44f9c 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -782,10 +782,9 @@ xfs_log_mount_finish( * mount failure occurs. */ mp->m_super->s_flags |= SB_ACTIVE; + xfs_log_work_queue(mp); if (xlog_recovery_needed(log)) error = xlog_recover_finish(log); - if (!error) - xfs_log_work_queue(mp); mp->m_super->s_flags &= ~SB_ACTIVE; evict_inodes(mp->m_super); -- 2.25.1

1 26

[PATCH openEuler-5.10-LTS-SP1 01/33] xfs: log worker needs to start before intent/unlink recovery
by Jialin Zhang 12 Apr '23

12 Apr '23

From: Dave Chinner <dchinner(a)redhat.com> mainline inclusion from mainline-v5.17-rc6 commit a9a4bc8c76d747aa40b30e2dfc176c781f353a08 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4KIAO CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- After 963 iterations of generic/530, it deadlocked during recovery on a pinned inode cluster buffer like so: XFS (pmem1): Starting recovery (logdev: internal) INFO: task kworker/8:0:306037 blocked for more than 122 seconds. Not tainted 5.17.0-rc6-dgc+ #975 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/8:0 state:D stack:13024 pid:306037 ppid: 2 flags:0x00004000 Workqueue: xfs-inodegc/pmem1 xfs_inodegc_worker Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 schedule_timeout+0x114/0x160 __down+0x99/0xf0 down+0x5e/0x70 xfs_buf_lock+0x36/0xf0 xfs_buf_find+0x418/0x850 xfs_buf_get_map+0x47/0x380 xfs_buf_read_map+0x54/0x240 xfs_trans_read_buf_map+0x1bd/0x490 xfs_imap_to_bp+0x4f/0x70 xfs_iunlink_map_ino+0x66/0xd0 xfs_iunlink_map_prev.constprop.0+0x148/0x2f0 xfs_iunlink_remove_inode+0xf2/0x1d0 xfs_inactive_ifree+0x1a3/0x900 xfs_inode_unlink+0xcc/0x210 xfs_inodegc_worker+0x1ac/0x2f0 process_one_work+0x1ac/0x390 worker_thread+0x56/0x3c0 kthread+0xf6/0x120 ret_from_fork+0x1f/0x30 </TASK> task:mount state:D stack:13248 pid:324509 ppid:324233 flags:0x00004000 Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 schedule_timeout+0x114/0x160 __down+0x99/0xf0 down+0x5e/0x70 xfs_buf_lock+0x36/0xf0 xfs_buf_find+0x418/0x850 xfs_buf_get_map+0x47/0x380 xfs_buf_read_map+0x54/0x240 xfs_trans_read_buf_map+0x1bd/0x490 xfs_imap_to_bp+0x4f/0x70 xfs_iget+0x300/0xb40 xlog_recover_process_one_iunlink+0x4c/0x170 xlog_recover_process_iunlinks.isra.0+0xee/0x130 xlog_recover_finish+0x57/0x110 xfs_log_mount_finish+0xfc/0x1e0 xfs_mountfs+0x540/0x910 xfs_fs_fill_super+0x495/0x850 get_tree_bdev+0x171/0x270 xfs_fs_get_tree+0x15/0x20 vfs_get_tree+0x24/0xc0 path_mount+0x304/0xba0 __x64_sys_mount+0x108/0x140 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> task:xfsaild/pmem1 state:D stack:14544 pid:324525 ppid: 2 flags:0x00004000 Call Trace: <TASK> __schedule+0x30d/0x9e0 schedule+0x55/0xd0 io_schedule+0x4b/0x80 xfs_buf_wait_unpin+0x9e/0xf0 __xfs_buf_submit+0x14a/0x230 xfs_buf_delwri_submit_buffers+0x107/0x280 xfs_buf_delwri_submit_nowait+0x10/0x20 xfsaild+0x27e/0x9d0 kthread+0xf6/0x120 ret_from_fork+0x1f/0x30 We have the mount process waiting on an inode cluster buffer read, inodegc doing unlink waiting on the same inode cluster buffer, and the AIL push thread blocked in writeback waiting for the inode cluster buffer to become unpinned. What has happened here is that the AIL push thread has raced with the inodegc process modifying, committing and pinning the inode cluster buffer here in xfs_buf_delwri_submit_buffers() here: blk_start_plug(&plug); list_for_each_entry_safe(bp, n, buffer_list, b_list) { if (!wait_list) { if (xfs_buf_ispinned(bp)) { pinned++; continue; } Here >>>>>> if (!xfs_buf_trylock(bp)) continue; Basically, the AIL has found the buffer wasn't pinned and got the lock without blocking, but then the buffer was pinned. This implies the processing here was pre-empted between the pin check and the lock, because the pin count can only be increased while holding the buffer locked. Hence when it has gone to submit the IO, it has blocked waiting for the buffer to be unpinned. With all executing threads now waiting on the buffer to be unpinned, we normally get out of situations like this via the background log worker issuing a log force which will unpinned stuck buffers like this. But at this point in recovery, we haven't started the log worker. In fact, the first thing we do after processing intents and unlinked inodes is *start the log worker*. IOWs, we start it too late to have it break deadlocks like this. Avoid this and any other similar deadlock vectors in intent and unlinked inode recovery by starting the log worker before we recover intents and unlinked inodes. This part of recovery runs as though the filesystem is fully active, so we really should have the same infrastructure running as we normally do at runtime. Signed-off-by: Dave Chinner <dchinner(a)redhat.com> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Reviewed-by: Chandan Babu R <chandan.babu(a)oracle.com> Signed-off-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Long Li <leo.lilong(a)huawei.com> Reviewed-by: Yang Erkun <yangerkun(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Jialin Zhang <zhangjialin11(a)huawei.com> --- fs/xfs/xfs_log.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/xfs/xfs_log.c b/fs/xfs/xfs_log.c index 92c5d6ef47d6..e154c0d44f9c 100644 --- a/fs/xfs/xfs_log.c +++ b/fs/xfs/xfs_log.c @@ -782,10 +782,9 @@ xfs_log_mount_finish( * mount failure occurs. */ mp->m_super->s_flags |= SB_ACTIVE; + xfs_log_work_queue(mp); if (xlog_recovery_needed(log)) error = xlog_recover_finish(log); - if (!error) - xfs_log_work_queue(mp); mp->m_super->s_flags &= ~SB_ACTIVE; evict_inodes(mp->m_super); -- 2.25.1

1 32

[PATCH openEuler-1.0-LTS] hwmon: (xgene) Fix use after free bug in xgene_hwmon_remove due to race condition
by Yongqiang Liu 11 Apr '23

11 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> mainline inclusion from mainline-v6.3-rc3 commit cb090e64cf25602b9adaf32d5dfc9c8bec493cd1 category: bugfix bugzilla: 188657, https://gitee.com/src-openeuler/kernel/issues/I6T36A CVE: CVE-2023-1855 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In xgene_hwmon_probe, &ctx->workq is bound with xgene_hwmon_evt_work. Then it will be started. If we remove the driver which will call xgene_hwmon_remove to clean up, there may be unfinished work. The possible sequence is as follows: Fix it by finishing the work before cleanup in xgene_hwmon_remove. CPU0 CPU1 |xgene_hwmon_evt_work xgene_hwmon_remove | kfifo_free(&ctx->async_msg_fifo);| | |kfifo_out_spinlocked |//use &ctx->async_msg_fifo Fixes: 2ca492e22cb7 ("hwmon: (xgene) Fix crash when alarm occurs before driver probe") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Link: https://lore.kernel.org/r/20230310084007.1403388-1-zyytlz.wz@163.com Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Zhao Wenhui <zhaowenhui8(a)huawei.com> Reviewed-by: songping yu <yusongping(a)huawei.com> Reviewed-by: Zhang Qiao <zhangqiao22(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/hwmon/xgene-hwmon.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/hwmon/xgene-hwmon.c b/drivers/hwmon/xgene-hwmon.c index a3cd91f23267..2dd19a420305 100644 --- a/drivers/hwmon/xgene-hwmon.c +++ b/drivers/hwmon/xgene-hwmon.c @@ -780,6 +780,7 @@ static int xgene_hwmon_remove(struct platform_device *pdev) { struct xgene_hwmon_dev *ctx = platform_get_drvdata(pdev); + cancel_work_sync(&ctx->workq); hwmon_device_unregister(ctx->hwmon_dev); kfifo_free(&ctx->async_msg_fifo); if (acpi_disabled) -- 2.25.1

1 0

[Dev] Kernel SIG邀请您参加2023年4月20日~21日 openEuler Developer Day SIG组开放工作会议
by Zhengzengkai 11 Apr '23

11 Apr '23

��ã� openEuler Developer Day 2023(�� ODD 2023�� openEuler��ȶ��飬 �ǿ��ԭ�ӿ�Դ�� openEuler ��Ŀ��߷�ᡣ ODD 2023��2023��4��20��~21��Ϻ��ֶ��Ƶ��У��ӭ��ұ��λᡣ ��̼��Ϣ�ɲο��ӣ�https://www.openeuler.org/zh/interaction/summit-list/devday2023/ ��ӣ�https://e-campaign.huawei.com/m/RNN3Yz ��openEuler Kernel SIG��μ�4��21��16��00 �C 17��30��е�ODD 2023 Kernel SIG��¿��Ź��飬 ��ʱ��ߣ��潻�� ¿��Ź��ǰ�ռ��⣬�밴��+��+��ˡ��ʽ�ύ��etherpad�� https://etherpad.openeuler.org/p/ODD2023_Kernel_SIG

1 0

[PATCH] fs: eulerfs: fix wrong dereferencing in eufs_lookup
by Kang Chen 10 Apr '23

10 Apr '23

inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6TN56 -------------------------------- smatch report: fs/eulerfs/namei.c:118 eufs_lookup() error: 'inode' dereferencing possible ERR_PTR() Signed-off-by: Kang Chen <void0red(a)hust.edu.cn> --- I run smatch on the openEuler-2203-sp1 source and find some bugs. But I have on idea on the fields of the commit message template. Please let me know if there is anything that can be improved. fs/eulerfs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/eulerfs/namei.c b/fs/eulerfs/namei.c index e4c6c36575f2..cfba6eefbcc8 100644 --- a/fs/eulerfs/namei.c +++ b/fs/eulerfs/namei.c @@ -116,7 +116,7 @@ static struct dentry *eufs_lookup(struct inode *dir, struct dentry *dentry, inode = eufs_iget(dir->i_sb, s2p(dir->i_sb, de->inode)); if (inode == ERR_PTR(-ESTALE)) { eufs_err(dir->i_sb, "deleted inode referenced: 0x%lx", - inode->i_ino); + le64_to_cpu(de->inode)); return ERR_PTR(-EIO); } not_found: -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] xirc2ps_cs: Fix use after free bug in xirc2ps_detach
by Yongqiang Liu 10 Apr '23

10 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> stable inclusion from stable-v4.19.279 commit 526660c25d3b93b1232a525b75469048388f0928 category: bugfix bugzilla: 188641, https://gitee.com/src-openeuler/kernel/issues/I6R4MM CVE: CVE-2023-1670 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit e8d20c3ded59a092532513c9bd030d1ea66f5f44 ] In xirc2ps_probe, the local->tx_timeout_task was bounded with xirc2ps_tx_timeout_task. When timeout occurs, it will call xirc_tx_timeout->schedule_work to start the work. When we call xirc2ps_detach to remove the driver, there may be a sequence as follows: Stop responding to timeout tasks and complete scheduled tasks before cleanup in xirc2ps_detach, which will fix the problem. CPU0 CPU1 |xirc2ps_tx_timeout_task xirc2ps_detach | free_netdev | kfree(dev); | | | do_reset | //use dev Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> Reviewed-by: Liu Jian <liujian56(a)huawei.com> Reviewed-by: Wang Weiyang <wangweiyang2(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/net/ethernet/xircom/xirc2ps_cs.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/ethernet/xircom/xirc2ps_cs.c b/drivers/net/ethernet/xircom/xirc2ps_cs.c index fd5288ff53b5..e3438cef5f9c 100644 --- a/drivers/net/ethernet/xircom/xirc2ps_cs.c +++ b/drivers/net/ethernet/xircom/xirc2ps_cs.c @@ -503,6 +503,11 @@ static void xirc2ps_detach(struct pcmcia_device *link) { struct net_device *dev = link->priv; + struct local_info *local = netdev_priv(dev); + + netif_carrier_off(dev); + netif_tx_disable(dev); + cancel_work_sync(&local->tx_timeout_task); dev_dbg(&link->dev, "detach\n"); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] 9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition
by Yongqiang Liu 10 Apr '23

10 Apr '23

From: Zheng Wang <zyytlz.wz(a)163.com> maillist inclusion category: bugfix bugzilla: 188655, https://gitee.com/src-openeuler/kernel/issues/I6T36H CVE: CVE-2023-1859 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/… ---------------------------------------- In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring to init priv->rings and bound &ring->work with p9_xen_response. When it calls xen_9pfs_front_event_handler to handle IRQ requests, it will finally call schedule_work to start the work. When we call xen_9pfs_front_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in xen_9pfs_front_free. Note that, this bug is found by static analysis, which might be false positive. CPU0 CPU1 |p9_xen_response xen_9pfs_front_remove| xen_9pfs_front_free| kfree(priv) | //free priv | |p9_tag_lookup |//use priv->client Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend") Signed-off-by: Zheng Wang <zyytlz.wz(a)163.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski(a)linux.intel.com> Signed-off-by: Eric Van Hensbergen <ericvh(a)kernel.org> Signed-off-by: Lu Wei <luwei32(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- net/9p/trans_xen.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 81002cba88b3..8e158f09cba8 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -290,6 +290,10 @@ static void xen_9pfs_front_free(struct xen_9pfs_front_priv *priv) write_unlock(&xen_9pfs_lock); for (i = 0; i < priv->num_rings; i++) { + struct xen_9pfs_dataring *ring = &priv->rings[i]; + + cancel_work_sync(&ring->work); + if (!priv->rings[i].intf) break; if (priv->rings[i].irq > 0) -- 2.25.1

1 0

[PATCH OLK-5.10] KVM: nVMX: Set LDTR to its architecturally defined value on nested VM-Exit
by 任敏敏(联通集团联通数字科技有限公司本部) 10 Apr '23

10 Apr '23

From: Sean Christopherson <seanjc(a)google.com> stable inclusion from stable-v5.15 commit afc8de0118be84f4058b9977d481aeb3e0758dbb category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6SN2F CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ------------------------------ commit afc8de0118be84f4058b9977d481aeb3e0758dbb upstream Set L1's LDTR on VM-Exit per the Intel SDM: The host-state area does not contain a selector field for LDTR. LDTR is established as follows on all VM exits: the selector is cleared to 0000H, the segment is marked unusable and is otherwise undefined (although the base address is always canonical). This is likely a benign bug since the LDTR is unusable, as it means the L1 VMM is conditioned to reload its LDTR in order to function properly on bare metal. Fixes: 4704d0befb07 ("KVM: nVMX: Exiting from L2 to L1") Reviewed-by: Reiji Watanabe <reijiw(a)google.com> Signed-off-by: Sean Christopherson <seanjc(a)google.com> Message-Id: <20210713163324.627647-3-seanjc(a)google.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: rminmin <renmm6(a)chinaunicom.cn> --- arch/x86/kvm/vmx/nested.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c index 9003b14d72ca..05284589c14d 100644 --- a/arch/x86/kvm/vmx/nested.c +++ b/arch/x86/kvm/vmx/nested.c @@ -4326,6 +4326,10 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu, }; vmx_set_segment(vcpu, &seg, VCPU_SREG_TR); + memset(&seg, 0, sizeof(seg)); + seg.unusable = 1; + vmx_set_segment(vcpu, &seg, VCPU_SREG_LDTR); + kvm_set_dr(vcpu, 7, 0x400); vmcs_write64(GUEST_IA32_DEBUGCTL, 0); -- 2.33.0 Èç¹ûÄúŽíÎóœÓÊÕÁËžÃÓÊŒþ£¬ÇëÍš¹ýµç×ÓÓÊŒþÁ¢ŒŽÍšÖªÎÒÃÇ¡£Çë»ØžŽÓÊŒþµœ hqs-spmc@chinaunicom.cn£¬ŒŽ¿ÉÒÔÍË¶©ŽËÓÊŒþ¡£ÎÒÃÇœ«Á¢ŒŽœ«ÄúµÄÐÅÏ¢ŽÓÎÒÃÇµÄ·¢ËÍÄ¿ÂŒÖÐÉŸ³ý¡£ If you have received this email in error please notify us immediately by e-mail. Please reply to hqs-spmc(a)chinaunicom.cn ,you can unsubscribe from this mail. We will immediately remove your information from send catalogue of our.

1 0

[PATCH 0/2] support dynamic affinity
by Hui Tang 08 Apr '23

08 Apr '23

test report: [root@localhost at]# bash -x dyn_affinity_interface.sh + ret=0 ++ cat /proc/sys/kernel/sched_util_low_pct + default_sched_util_low_pct=85 + read_default_val /proc/sys/kernel/sched_util_low_pct 85 + local interface=/proc/sys/kernel/sched_util_low_pct + local expect_val=85 + echo 'TINFO: test /proc/sys/kernel/sched_util_low_pct default value is 85' TINFO: test /proc/sys/kernel/sched_util_low_pct default value is 85 + '[' '!' -f /proc/sys/kernel/sched_util_low_pct ']' ++ cat /proc/sys/kernel/sched_util_low_pct + '[' 85 '!=' 85 ']' + '[' 0 -ne 0 ']' + echo 'TPASS: dyn_affinity_interface test success' TPASS: dyn_affinity_interface test success + write_some_val /proc/sys/kernel/sched_util_low_pct -1 1 + write_some_val /proc/sys/kernel/sched_util_low_pct 101 1 + write_some_val /proc/sys/kernel/sched_util_low_pct abc 1 + write_some_val /proc/sys/kernel/sched_util_low_pct 100 0 + local interface=/proc/sys/kernel/sched_util_low_pct + local write_val=100 + local expect_ret=0 + echo 'TINFO: write 100 to /proc/sys/kernel/sched_util_low_pct, expect ret: 0' TINFO: write 100 to /proc/sys/kernel/sched_util_low_pct, expect ret: 0 + echo 100 + '[' 0 -ne 0 ']' + echo 'TPASS: write 100 to /proc/sys/kernel/sched_util_low_pct success' TPASS: write 100 to /proc/sys/kernel/sched_util_low_pct success + write_some_val /proc/sys/kernel/sched_util_low_pct 0 0 + local interface=/proc/sys/kernel/sched_util_low_pct + local write_val=0 + local expect_ret=0 + echo 'TINFO: write 0 to /proc/sys/kernel/sched_util_low_pct, expect ret: 0' TINFO: write 0 to /proc/sys/kernel/sched_util_low_pct, expect ret: 0 + echo 0 + '[' 0 -ne 0 ']' + echo 'TPASS: write 0 to /proc/sys/kernel/sched_util_low_pct success' TPASS: write 0 to /proc/sys/kernel/sched_util_low_pct success + cleanup + echo 85 + exit 0 [root@localhost at]# [root@localhost at]# bash -x dyn_affinity_low_load.sh + TEST_CPUSET_PATH=/sys/fs/cgroup/cpuset/cloud + TEST_CPU_PATH=/sys/fs/cgroup/cpu/cloud + ret=0 ++ seq 1 1 + for i in $(seq 1 1) + setup + '[' -d /sys/fs/cgroup/cpuset/cloud ']' + mkdir -p /sys/fs/cgroup/cpuset/cloud /sys/fs/cgroup/cpu/cloud + echo 0 + echo 0-7 + echo 1 + do_test + echo 4166 + echo 4166 + local pid=0 ++ seq 1 3 + for i in $(seq 1 3) + pid=4170 + echo 4170 + echo 4170 + for i in $(seq 1 3) + pid=4171 + echo 4171 + echo 4171 + ./cpu_load_not_while + for i in $(seq 1 3) + pid=4172 + ./cpu_load_not_while + echo 4172 + ./cpu_load_not_while + echo 4172 + echo 4166 + echo 4166 + sleep 0.1 ++ seq 1 100 + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ egrep 1 -w ++ grep load ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ wc -l ++ egrep 1 -w + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ egrep 1 -w ++ wc -l ++ grep load + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=3 + '[' 3 -ne 3 ']' + '[' 0 -eq 0 ']' + ps -o psr,comm,pid + grep cpu_load 1 cpu_load_not_wh 4170 1 cpu_load_not_wh 4171 1 cpu_load_not_wh 4172 + echo 'TPASS: test success' TPASS: test success + cleanup + killall cpu_load_not_while + sleep 0.1 + rmdir /sys/fs/cgroup/cpuset/cloud /sys/fs/cgroup/cpu/cloud + exit 0 [root@localhost at]# bash -x dyn_affinity_high_load.sh + TEST_CPUSET_PATH=/sys/fs/cgroup/cpuset/cloud + TEST_CPU_PATH=/sys/fs/cgroup/cpu/cloud + ret=0 ++ seq 1 1 + for i in $(seq 1 1) + setup + '[' -d /sys/fs/cgroup/cpuset/cloud ']' + mkdir -p /sys/fs/cgroup/cpuset/cloud /sys/fs/cgroup/cpu/cloud + echo 0 + echo 0-7 + echo 1 + do_test + echo 4121 + echo 4121 + local pid=0 ++ seq 1 30 + for i in $(seq 1 30) + pid=4125 + echo 4125 + echo 4125 + for i in $(seq 1 30) + pid=4126 + echo 4126 + ./cpu_load_not_while + echo 4126 + for i in $(seq 1 30) + pid=4127 + echo 4127 + ./cpu_load_not_while + ./cpu_load_not_while + echo 4127 + for i in $(seq 1 30) + pid=4128 + ./cpu_load_not_while + echo 4128 + echo 4128 + for i in $(seq 1 30) + pid=4129 + echo 4129 + echo 4129 + for i in $(seq 1 30) + ./cpu_load_not_while + pid=4130 + echo 4130 + ./cpu_load_not_while + echo 4130 + for i in $(seq 1 30) + pid=4131 + ./cpu_load_not_while + echo 4131 + echo 4131 + for i in $(seq 1 30) + pid=4132 + echo 4132 + echo 4132 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4133 + ./cpu_load_not_while + echo 4133 + echo 4133 + for i in $(seq 1 30) + pid=4134 + ./cpu_load_not_while + echo 4134 + echo 4134 + for i in $(seq 1 30) + pid=4135 + ./cpu_load_not_while + echo 4135 + echo 4135 + for i in $(seq 1 30) + pid=4136 + ./cpu_load_not_while + echo 4136 + echo 4136 + for i in $(seq 1 30) + pid=4137 + ./cpu_load_not_while + echo 4137 + echo 4137 + for i in $(seq 1 30) + pid=4138 + echo 4138 + ./cpu_load_not_while + echo 4138 + for i in $(seq 1 30) + pid=4139 + ./cpu_load_not_while + echo 4139 + echo 4139 + for i in $(seq 1 30) + pid=4140 + ./cpu_load_not_while + echo 4140 + echo 4140 + for i in $(seq 1 30) + pid=4141 + echo 4141 + ./cpu_load_not_while + echo 4141 + for i in $(seq 1 30) + pid=4142 + echo 4142 + ./cpu_load_not_while + echo 4142 + for i in $(seq 1 30) + pid=4143 + echo 4143 + ./cpu_load_not_while + echo 4143 + for i in $(seq 1 30) + pid=4144 + ./cpu_load_not_while + echo 4144 + echo 4144 + for i in $(seq 1 30) + pid=4145 + ./cpu_load_not_while + echo 4145 + echo 4145 + for i in $(seq 1 30) + pid=4146 + echo 4146 + echo 4146 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4147 + echo 4147 + echo 4147 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4148 + echo 4148 + echo 4148 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4149 + echo 4149 + echo 4149 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4150 + echo 4150 + echo 4150 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4151 + echo 4151 + echo 4151 + ./cpu_load_not_while + for i in $(seq 1 30) + pid=4152 + echo 4152 + ./cpu_load_not_while + echo 4152 + for i in $(seq 1 30) + pid=4153 + ./cpu_load_not_while + echo 4153 + echo 4153 + for i in $(seq 1 30) + pid=4154 + ./cpu_load_not_while + echo 4154 + echo 4154 + echo 4121 + echo 4121 + sleep 0.1 ++ seq 1 100 + for i in $(seq 1 100) ++ ps -o psr,comm,pid ++ grep load ++ egrep 1 -w ++ wc -l + local count=19 + '[' 19 -ne 30 ']' + ps -o psr,comm,pid + grep cpu_load 1 cpu_load_not_wh 4125 6 cpu_load_not_wh 4126 1 cpu_load_not_wh 4127 1 cpu_load_not_wh 4128 1 cpu_load_not_wh 4129 1 cpu_load_not_wh 4130 1 cpu_load_not_wh 4131 1 cpu_load_not_wh 4132 1 cpu_load_not_wh 4133 1 cpu_load_not_wh 4134 7 cpu_load_not_wh 4135 1 cpu_load_not_wh 4136 1 cpu_load_not_wh 4137 4 cpu_load_not_wh 4138 1 cpu_load_not_wh 4139 1 cpu_load_not_wh 4140 1 cpu_load_not_wh 4141 5 cpu_load_not_wh 4142 1 cpu_load_not_wh 4143 1 cpu_load_not_wh 4144 1 cpu_load_not_wh 4145 1 cpu_load_not_wh 4146 1 cpu_load_not_wh 4147 3 cpu_load_not_wh 4148 5 cpu_load_not_wh 4149 1 cpu_load_not_wh 4150 1 cpu_load_not_wh 4151 1 cpu_load_not_wh 4152 5 cpu_load_not_wh 4153 6 cpu_load_not_wh 4154 + echo 'TPASS: test success' TPASS: test success + exit tanghui (2): sched: Add statistics for scheduler dynamic affinity config: enable CONFIG_QOS_SCHED_DYNAMIC_AFFINITY by default arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/sched.h | 6 ++++++ kernel/sched/debug.c | 4 ++++ kernel/sched/fair.c | 11 +++++++++-- 5 files changed, 21 insertions(+), 2 deletions(-) -- 2.17.1

1 2

[PATCH openEuler-1.0-LTS] bpf: add missing header file include
by Yongqiang Liu 08 Apr '23

08 Apr '23

From: Linus Torvalds <torvalds(a)linux-foundation.org> stable inclusion from stable-v4.19.274 commit c7603df97635954165fb599e64e197efc353979b category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6TIG1 CVE: NA -------------------------------- commit f3dd0c53370e70c0f9b7e931bbec12916f3bb8cc upstream. Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") built fine on x86-64 and arm64, and that's the extent of my local build testing. It turns out those got the <linux/nospec.h> include incidentally through other header files (<linux/kvm_host.h> in particular), but that was not true of other architectures, resulting in build errors kernel/bpf/core.c: In function ‘___bpf_prog_run’: kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’ so just make sure to explicitly include the proper <linux/nospec.h> header file to make everybody see it. Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()") Reported-by: kernel test robot <lkp(a)intel.com> Reported-by: Viresh Kumar <viresh.kumar(a)linaro.org> Reported-by: Huacai Chen <chenhuacai(a)loongson.cn> Tested-by: Geert Uytterhoeven <geert(a)linux-m68k.org> Tested-by: Dave Hansen <dave.hansen(a)linux.intel.com> Acked-by: Alexei Starovoitov <alexei.starovoitov(a)gmail.com> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- kernel/bpf/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/bpf/core.c b/kernel/bpf/core.c index abf30609e0d9..56a60d483c8d 100644 --- a/kernel/bpf/core.c +++ b/kernel/bpf/core.c @@ -32,6 +32,7 @@ #include <linux/kallsyms.h> #include <linux/rcupdate.h> #include <linux/perf_event.h> +#include <linux/nospec.h> #include <asm/barrier.h> #include <asm/unaligned.h> -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 00/19] linux-4.19.y inclusion
by Yongqiang Liu 07 Apr '23

07 Apr '23

*** BLURB HERE *** Armin Wolf (1): ACPI: battery: Fix missing NUL-termination with large strings Baokun Li (1): ext4: fail ext4_iget if special inode unallocated Breno Leitao (1): x86/bugs: Reset speculation control settings on init Daniil Tatianin (1): ACPICA: nsrepair: handle cases without a return value correctly Dave Hansen (1): uaccess: Add speculation barrier to copy_from_user() Herbert Xu (2): crypto: seqiv - Handle EBUSY correctly crypto: rsa-pkcs1pad - Use akcipher_request_complete Jann Horn (1): timers: Prevent union confusion from unexpected restart_syscall() Jason A. Donenfeld (1): random: always mix cycle counter in add_latent_entropy() Johan Hovold (3): irqdomain: Fix association race irqdomain: Fix disassociation race irqdomain: Drop bogus fwspec-mapping error handling Nikita Zhandarovich (1): x86/mm: Fix use of uninitialized buffer in sme_enable() Thomas Gleixner (1): alarmtimer: Prevent starvation by small intervals and SIG_IGN Vishal Verma (1): ACPI: NFIT: fix a potential deadlock during NFIT teardown Yang Jihong (2): x86/kprobes: Fix __recover_optprobed_insn check optimizing logic x86/kprobes: Fix arch_check_optimized_kprobe check within optimized_kprobe range Zhen Lei (1): genirq: Fix the return type of kstat_cpu_irqs_sum() Zhihao Cheng (1): ext4: zero i_disksize when initializing the bootloader inode arch/x86/include/asm/msr-index.h | 4 ++++ arch/x86/kernel/cpu/bugs.c | 10 ++++++++- arch/x86/kernel/kprobes/opt.c | 6 +++--- arch/x86/mm/mem_encrypt_identity.c | 3 ++- crypto/rsa-pkcs1pad.c | 34 +++++++++++++----------------- crypto/seqiv.c | 2 +- drivers/acpi/acpica/nsrepair.c | 12 ++++++----- drivers/acpi/battery.c | 2 +- drivers/acpi/nfit/core.c | 2 +- fs/ext4/inode.c | 18 +++++++--------- fs/ext4/ioctl.c | 1 + include/linux/kernel_stat.h | 2 +- include/linux/kprobes.h | 2 ++ include/linux/nospec.h | 4 ++++ include/linux/random.h | 6 +++--- kernel/bpf/core.c | 2 -- kernel/irq/irqdomain.c | 31 +++++++++++++++++---------- kernel/kprobes.c | 6 +++--- kernel/time/alarmtimer.c | 33 +++++++++++++++++++++++++---- kernel/time/hrtimer.c | 2 ++ kernel/time/posix-stubs.c | 2 ++ kernel/time/posix-timers.c | 2 ++ lib/usercopy.c | 7 ++++++ 23 files changed, 127 insertions(+), 66 deletions(-) -- 2.25.1

1 19

[PATCH openEuler-1.0-LTS 01/19] alarmtimer: Prevent starvation by small intervals and SIG_IGN
by Yongqiang Liu 07 Apr '23

07 Apr '23

From: Thomas Gleixner <tglx(a)linutronix.de> stable inclusion from stable-v4.19.274 commit d6a300076d11a6e27b4d4f7fd986ec66ee97a3e1 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6TIG1 CVE: NA -------------------------------- commit d125d1349abeb46945dc5e98f7824bf688266f13 upstream. syzbot reported a RCU stall which is caused by setting up an alarmtimer with a very small interval and ignoring the signal. The reproducer arms the alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a problem per se, but that's an issue when the signal is ignored because then the timer is immediately rearmed because there is no way to delay that rearming to the signal delivery path. See posix_timer_fn() and commit 58229a189942 ("posix-timers: Prevent softirq starvation by small intervals and SIG_IGN") for details. The reproducer does not set SIG_IGN explicitely, but it sets up the timers signal with SIGCONT. That has the same effect as explicitely setting SIG_IGN for a signal as SIGCONT is ignored if there is no handler set and the task is not ptraced. The log clearly shows that: [pid 5102] --- SIGCONT {si_signo=SIGCONT, si_code=SI_TIMER, si_timerid=0, si_overrun=316014, si_int=0, si_ptr=NULL} --- It works because the tasks are traced and therefore the signal is queued so the tracer can see it, which delays the restart of the timer to the signal delivery path. But then the tracer is killed: [pid 5087] kill(-5102, SIGKILL <unfinished ...> ... ./strace-static-x86_64: Process 5107 detached and after it's gone the stall can be observed: syzkaller login: [ 79.439102][ C0] hrtimer: interrupt took 68471 ns [ 184.460538][ C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: ... [ 184.658237][ C1] rcu: Stack dump where RCU GP kthread last ran: [ 184.664574][ C1] Sending NMI from CPU 1 to CPUs 0: [ 184.669821][ C0] NMI backtrace for cpu 0 [ 184.669831][ C0] CPU: 0 PID: 5108 Comm: syz-executor192 Not tainted 6.2.0-rc6-next-20230203-syzkaller #0 ... [ 184.670036][ C0] Call Trace: [ 184.670041][ C0] <IRQ> [ 184.670045][ C0] alarmtimer_fired+0x327/0x670 posix_timer_fn() prevents that by checking whether the interval for timers which have the signal ignored is smaller than a jiffie and artifically delay it by shifting the next expiry out by a jiffie. That's accurate vs. the overrun accounting, but slightly inaccurate vs. timer_gettimer(2). The comment in that function says what needs to be done and there was a fix available for the regular userspace induced SIG_IGN mechanism, but that did not work due to the implicit ignore for SIGCONT and similar signals. This needs to be worked on, but for now the only available workaround is to do exactly what posix_timer_fn() does: Increase the interval of self-rearming timers, which have their signal ignored, to at least a jiffie. Interestingly this has been fixed before via commit ff86bf0c65f1 ("alarmtimer: Rate limit periodic intervals") already, but that fix got lost in a later rework. Reported-by: syzbot+b9564ba6e8e00694511b(a)syzkaller.appspotmail.com Fixes: f2c45807d399 ("alarmtimer: Switch over to generic set/get/rearm routine") Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Acked-by: John Stultz <jstultz(a)google.com> Cc: stable(a)vger.kernel.org Link: https://lore.kernel.org/r/87k00q1no2.ffs@tglx Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- kernel/time/alarmtimer.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) diff --git a/kernel/time/alarmtimer.c b/kernel/time/alarmtimer.c index 6a2ba39889bd..56af8a97cf2d 100644 --- a/kernel/time/alarmtimer.c +++ b/kernel/time/alarmtimer.c @@ -476,11 +476,35 @@ u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval) } EXPORT_SYMBOL_GPL(alarm_forward); -u64 alarm_forward_now(struct alarm *alarm, ktime_t interval) +static u64 __alarm_forward_now(struct alarm *alarm, ktime_t interval, bool throttle) { struct alarm_base *base = &alarm_bases[alarm->type]; + ktime_t now = base->gettime(); + + if (IS_ENABLED(CONFIG_HIGH_RES_TIMERS) && throttle) { + /* + * Same issue as with posix_timer_fn(). Timers which are + * periodic but the signal is ignored can starve the system + * with a very small interval. The real fix which was + * promised in the context of posix_timer_fn() never + * materialized, but someone should really work on it. + * + * To prevent DOS fake @now to be 1 jiffie out which keeps + * the overrun accounting correct but creates an + * inconsistency vs. timer_gettime(2). + */ + ktime_t kj = NSEC_PER_SEC / HZ; + + if (interval < kj) + now = ktime_add(now, kj); + } + + return alarm_forward(alarm, now, interval); +} - return alarm_forward(alarm, base->gettime(), interval); +u64 alarm_forward_now(struct alarm *alarm, ktime_t interval) +{ + return __alarm_forward_now(alarm, interval, false); } EXPORT_SYMBOL_GPL(alarm_forward_now); @@ -554,9 +578,10 @@ static enum alarmtimer_restart alarm_handle_timer(struct alarm *alarm, if (posix_timer_event(ptr, si_private) && ptr->it_interval) { /* * Handle ignored signals and rearm the timer. This will go - * away once we handle ignored signals proper. + * away once we handle ignored signals proper. Ensure that + * small intervals cannot starve the system. */ - ptr->it_overrun += alarm_forward_now(alarm, ptr->it_interval); + ptr->it_overrun += __alarm_forward_now(alarm, ptr->it_interval, true); ++ptr->it_requeue_pending; ptr->it_active = 1; result = ALARMTIMER_RESTART; -- 2.25.1

1 18