- Kernel - mailweb.openeuler.org

[PATCH openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

2 8

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

2 9

openEuler Kernel SIG双周例会
by openEuler conference 20 Sep '23

20 Sep '23

您好！ Kernel SIG 邀请您参加 2023-09-22 14:00 召开的Zoom会议(自动录制) 会议主题：openEuler Kernel SIG双周例会会议内容： 1. 进展update 2. 议题征集中新增议题可直接回复邮件申请，或录入会议看板会议链接：https://us06web.zoom.us/j/83542407044?pwd=UYtASnHgeP3bOAEaO9OCyMaPdQc6iA.1 会议纪要：https://etherpad.openeuler.org/p/Kernel-meetings 温馨提醒：建议接入会议后修改参会人的姓名，也可以使用您在gitee.com的ID 更多资讯尽在：https://openeuler.org/zh/ Hello! openEuler Kernel SIG invites you to attend the Zoom conference(auto recording) will be held at 2023-09-22 14:00, The subject of the conference is openEuler Kernel SIG双周例会, Summary: 1. 进展update 2. 议题征集中新增议题可直接回复邮件申请，或录入会议看板 You can join the meeting at https://us06web.zoom.us/j/83542407044?pwd=UYtASnHgeP3bOAEaO9OCyMaPdQc6iA.1. Add topics at https://etherpad.openeuler.org/p/Kernel-meetings. Note: You are advised to change the participant name after joining the conference or use your ID at gitee.com. More information: https://openeuler.org/en/

1 0

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

1 7

[PATCH v4 openEuler-23.09 0/3] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 20 Sep '23

20 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (3): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed remote_pager: delete unused file drivers/remote_pager/Kconfig | 9 + drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 111 ++------ drivers/remote_pager/swap/device/ksymbol.c | 83 ------ drivers/remote_pager/swap/device/ksymbol.h | 35 --- .../remote_pager/swap/device/swap_manager.c | 256 ------------------ .../remote_pager/swap/device/swap_manager.h | 28 -- .../swap/device/swap_policy/policy_list_lru.c | 108 -------- .../swap/device/swap_policy/swap_policy.h | 16 -- mm/mmap.c | 1 + 11 files changed, 33 insertions(+), 622 deletions(-) delete mode 100644 drivers/remote_pager/swap/device/ksymbol.c delete mode 100644 drivers/remote_pager/swap/device/ksymbol.h delete mode 100644 drivers/remote_pager/swap/device/swap_manager.c delete mode 100644 drivers/remote_pager/swap/device/swap_manager.h delete mode 100644 drivers/remote_pager/swap/device/swap_policy/policy_list_lru.c delete mode 100644 drivers/remote_pager/swap/device/swap_policy/swap_policy.h -- 2.25.1

2 4

[openEuler-23.09 0/7] LoongArch: backport drm and spi driver and some bugfixes
by Hongchen Zhang 20 Sep '23

20 Sep '23

Backport the following patches from upstream. Dan Carpenter (1): drm/loongson: Add a check for lsdc_bo_create() errors Hongchen Zhang (1): LoongArch: mm: Add p?d_leaf() definitions Huacai Chen (2): LoongArch: Allow usage of LSX/LASX in the kernel LoongArch: Fix module relocation error with binutils 2.41 Sui Jingfeng (2): drm: Add kms driver for loongson display controller drm/loongson: Remove a useless check in cursor_plane_atomic_async_check() Yinbo Zhu (1): spi: loongson: add bus driver for the loongson spi controller MAINTAINERS | 4 + arch/loongarch/Makefile | 2 + arch/loongarch/include/asm/pgtable.h | 3 + arch/loongarch/kernel/kfpu.c | 55 +- drivers/gpio/gpio-loongson.c | 413 +++++-- drivers/gpu/drm/Kconfig | 2 + drivers/gpu/drm/Makefile | 1 + drivers/gpu/drm/loongson/Kconfig | 17 + drivers/gpu/drm/loongson/Makefile | 22 + drivers/gpu/drm/loongson/loongson_device.c | 102 ++ drivers/gpu/drm/loongson/loongson_module.c | 33 + drivers/gpu/drm/loongson/loongson_module.h | 12 + drivers/gpu/drm/loongson/lsdc_benchmark.c | 133 +++ drivers/gpu/drm/loongson/lsdc_benchmark.h | 13 + drivers/gpu/drm/loongson/lsdc_crtc.c | 1024 +++++++++++++++++ drivers/gpu/drm/loongson/lsdc_debugfs.c | 110 ++ drivers/gpu/drm/loongson/lsdc_drv.c | 457 ++++++++ drivers/gpu/drm/loongson/lsdc_drv.h | 388 +++++++ drivers/gpu/drm/loongson/lsdc_gem.c | 311 +++++ drivers/gpu/drm/loongson/lsdc_gem.h | 37 + drivers/gpu/drm/loongson/lsdc_gfxpll.c | 199 ++++ drivers/gpu/drm/loongson/lsdc_gfxpll.h | 52 + drivers/gpu/drm/loongson/lsdc_i2c.c | 179 +++ drivers/gpu/drm/loongson/lsdc_i2c.h | 29 + drivers/gpu/drm/loongson/lsdc_irq.c | 74 ++ drivers/gpu/drm/loongson/lsdc_irq.h | 16 + drivers/gpu/drm/loongson/lsdc_output.h | 21 + drivers/gpu/drm/loongson/lsdc_output_7a1000.c | 178 +++ drivers/gpu/drm/loongson/lsdc_output_7a2000.c | 552 +++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.c | 481 ++++++++ drivers/gpu/drm/loongson/lsdc_pixpll.h | 86 ++ drivers/gpu/drm/loongson/lsdc_plane.c | 793 +++++++++++++ drivers/gpu/drm/loongson/lsdc_probe.c | 56 + drivers/gpu/drm/loongson/lsdc_probe.h | 12 + drivers/gpu/drm/loongson/lsdc_regs.h | 406 +++++++ drivers/gpu/drm/loongson/lsdc_ttm.c | 593 ++++++++++ drivers/gpu/drm/loongson/lsdc_ttm.h | 99 ++ drivers/spi/Kconfig | 26 + drivers/spi/Makefile | 3 + drivers/spi/spi-loongson-core.c | 279 +++++ drivers/spi/spi-loongson-pci.c | 55 + drivers/spi/spi-loongson-plat.c | 47 + drivers/spi/spi-loongson.h | 49 + 43 files changed, 7345 insertions(+), 79 deletions(-) create mode 100644 drivers/gpu/drm/loongson/Kconfig create mode 100644 drivers/gpu/drm/loongson/Makefile create mode 100644 drivers/gpu/drm/loongson/loongson_device.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.c create mode 100644 drivers/gpu/drm/loongson/loongson_module.h create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.c create mode 100644 drivers/gpu/drm/loongson/lsdc_benchmark.h create mode 100644 drivers/gpu/drm/loongson/lsdc_crtc.c create mode 100644 drivers/gpu/drm/loongson/lsdc_debugfs.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.c create mode 100644 drivers/gpu/drm/loongson/lsdc_drv.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gem.h create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_gfxpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.c create mode 100644 drivers/gpu/drm/loongson/lsdc_i2c.h create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.c create mode 100644 drivers/gpu/drm/loongson/lsdc_irq.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output.h create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a1000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_output_7a2000.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.c create mode 100644 drivers/gpu/drm/loongson/lsdc_pixpll.h create mode 100644 drivers/gpu/drm/loongson/lsdc_plane.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.c create mode 100644 drivers/gpu/drm/loongson/lsdc_probe.h create mode 100644 drivers/gpu/drm/loongson/lsdc_regs.h create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.c create mode 100644 drivers/gpu/drm/loongson/lsdc_ttm.h create mode 100644 drivers/spi/spi-loongson-core.c create mode 100644 drivers/spi/spi-loongson-pci.c create mode 100644 drivers/spi/spi-loongson-plat.c create mode 100644 drivers/spi/spi-loongson.h -- 2.33.0

1 2

[PATCH v3 openEuler-23.09 0/3] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 20 Sep '23

20 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (3): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed remote_pager: delete unused file drivers/remote_pager/Kconfig | 8 + drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 111 ++------ drivers/remote_pager/swap/device/ksymbol.c | 83 ------ drivers/remote_pager/swap/device/ksymbol.h | 35 --- .../remote_pager/swap/device/swap_manager.c | 256 ------------------ .../remote_pager/swap/device/swap_manager.h | 28 -- .../swap/device/swap_policy/policy_list_lru.c | 108 -------- .../swap/device/swap_policy/swap_policy.h | 16 -- mm/mmap.c | 1 + 11 files changed, 32 insertions(+), 622 deletions(-) delete mode 100644 drivers/remote_pager/swap/device/ksymbol.c delete mode 100644 drivers/remote_pager/swap/device/ksymbol.h delete mode 100644 drivers/remote_pager/swap/device/swap_manager.c delete mode 100644 drivers/remote_pager/swap/device/swap_manager.h delete mode 100644 drivers/remote_pager/swap/device/swap_policy/policy_list_lru.c delete mode 100644 drivers/remote_pager/swap/device/swap_policy/swap_policy.h -- 2.25.1

2 4

[PATCH openEuler-22.03-LTS 0/5] x86/speculation: Add force option to GDS mitigation
by Zeng Heng 19 Sep '23

19 Sep '23

Arnd Bergmann (1): x86: Move gds_ucode_mitigated() declaration to header Daniel Sneddon (3): x86/speculation: Add force option to GDS mitigation x86/speculation: Add Kconfig option for GDS KVM: Add GDS_NO support to KVM Dave Hansen (1): Documentation/x86: Fix backwards on/off logic about YMM support .../hw-vuln/gather_data_sampling.rst | 18 ++++++++--- .../admin-guide/kernel-parameters.txt | 8 ++++- arch/x86/Kconfig | 19 ++++++++++++ arch/x86/include/asm/processor.h | 2 ++ arch/x86/kernel/cpu/bugs.c | 31 ++++++++++++++++++- arch/x86/kvm/x86.c | 3 ++ 6 files changed, 75 insertions(+), 6 deletions(-) -- 2.25.1

2 6

[PATCH openEuler-23.09 v1] sch_netem: fix issues in netem_change() vs get_dist_table()
by Yue Haibing 19 Sep '23

19 Sep '23

From: Eric Dumazet <edumazet(a)google.com> mainline inclusion from mainline-v6.5-rc1 commit 11b73313c12403f617b47752db0ab3deef201af7 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I80FL9 CVE: NA -------------------------------- In blamed commit, I missed that get_dist_table() was allocating memory using GFP_KERNEL, and acquiring qdisc lock to perform the swap of newly allocated table with current one. In this patch, get_dist_table() is allocating memory and copy user data before we acquire the qdisc lock. Then we perform swap operations while being protected by the lock. Note that after this patch netem_change() no longer can do partial changes. If an error is returned, qdisc conf is left unchanged. Fixes: 2174a08db80d ("sch_netem: acquire qdisc lock in netem_change()") Reported-by: syzbot <syzkaller(a)googlegroups.com> Signed-off-by: Eric Dumazet <edumazet(a)google.com> Cc: Stephen Hemminger <stephen(a)networkplumber.org> Acked-by: Jamal Hadi Salim <jhs(a)mojatatu.com> Reviewed-by: Simon Horman <simon.horman(a)corigine.com> Link: https://lore.kernel.org/r/20230622181503.2327695-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Yue Haibing <yuehaibing(a)huawei.com> --- net/sched/sch_netem.c | 59 ++++++++++++++++++------------------------- 1 file changed, 25 insertions(+), 34 deletions(-) diff --git a/net/sched/sch_netem.c b/net/sched/sch_netem.c index e79be1b3e74d..b93ec2a3454e 100644 --- a/net/sched/sch_netem.c +++ b/net/sched/sch_netem.c @@ -773,12 +773,10 @@ static void dist_free(struct disttable *d) * signed 16 bit values. */ -static int get_dist_table(struct Qdisc *sch, struct disttable **tbl, - const struct nlattr *attr) +static int get_dist_table(struct disttable **tbl, const struct nlattr *attr) { size_t n = nla_len(attr)/sizeof(__s16); const __s16 *data = nla_data(attr); - spinlock_t *root_lock; struct disttable *d; int i; @@ -793,13 +791,7 @@ static int get_dist_table(struct Qdisc *sch, struct disttable **tbl, for (i = 0; i < n; i++) d->table[i] = data[i]; - root_lock = qdisc_root_sleeping_lock(sch); - - spin_lock_bh(root_lock); - swap(*tbl, d); - spin_unlock_bh(root_lock); - - dist_free(d); + *tbl = d; return 0; } @@ -956,6 +948,8 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt, { struct netem_sched_data *q = qdisc_priv(sch); struct nlattr *tb[TCA_NETEM_MAX + 1]; + struct disttable *delay_dist = NULL; + struct disttable *slot_dist = NULL; struct tc_netem_qopt *qopt; struct clgstate old_clg; int old_loss_model = CLG_RANDOM; @@ -966,6 +960,18 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt, if (ret < 0) return ret; + if (tb[TCA_NETEM_DELAY_DIST]) { + ret = get_dist_table(&delay_dist, tb[TCA_NETEM_DELAY_DIST]); + if (ret) + goto table_free; + } + + if (tb[TCA_NETEM_SLOT_DIST]) { + ret = get_dist_table(&slot_dist, tb[TCA_NETEM_SLOT_DIST]); + if (ret) + goto table_free; + } + sch_tree_lock(sch); /* backup q->clg and q->loss_model */ old_clg = q->clg; @@ -975,26 +981,17 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt, ret = get_loss_clg(q, tb[TCA_NETEM_LOSS]); if (ret) { q->loss_model = old_loss_model; + q->clg = old_clg; goto unlock; } } else { q->loss_model = CLG_RANDOM; } - if (tb[TCA_NETEM_DELAY_DIST]) { - ret = get_dist_table(sch, &q->delay_dist, - tb[TCA_NETEM_DELAY_DIST]); - if (ret) - goto get_table_failure; - } - - if (tb[TCA_NETEM_SLOT_DIST]) { - ret = get_dist_table(sch, &q->slot_dist, - tb[TCA_NETEM_SLOT_DIST]); - if (ret) - goto get_table_failure; - } - + if (delay_dist) + swap(q->delay_dist, delay_dist); + if (slot_dist) + swap(q->slot_dist, slot_dist); sch->limit = qopt->limit; q->latency = PSCHED_TICKS2NS(qopt->latency); @@ -1044,17 +1041,11 @@ static int netem_change(struct Qdisc *sch, struct nlattr *opt, unlock: sch_tree_unlock(sch); - return ret; -get_table_failure: - /* recover clg and loss_model, in case of - * q->clg and q->loss_model were modified - * in get_loss_clg() - */ - q->clg = old_clg; - q->loss_model = old_loss_model; - - goto unlock; +table_free: + dist_free(delay_dist); + dist_free(slot_dist); + return ret; } static int netem_init(struct Qdisc *sch, struct nlattr *opt, -- 2.34.1

2 1

[PATCH OLK-5.10] [Backport] media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
by ChenXiaoSong 19 Sep '23

19 Sep '23

From: Hyunwoo Kim <imv4bel(a)gmail.com> stable inclusion from stable-v5.10.183 commit eb37fef417a246fe54530901a3ea9c0abc914fc2 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I635HP CVE: CVE-2022-45887 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ] Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called. This causes a memory leak just by repeatedly plugging and unplugging the device. Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb(). Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: ChenXiaoSong <chenxiaosong2(a)huawei.com> --- drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index df6c5e4a0f05..68f88143c8a6 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -1551,8 +1551,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) dvb_dmx_release(&dec->demux); if (dec->fe) { dvb_unregister_frontend(dec->fe); - if (dec->fe->ops.release) - dec->fe->ops.release(dec->fe); + dvb_frontend_detach(dec->fe); } dvb_unregister_adapter(&dec->adapter); } -- 2.31.1

2 1

[PATCH openEuler-23.09 0/2] xfs: fix NULL dereference in xlog_cil_pcp_dead
by Baokun Li 19 Sep '23

19 Sep '23

Darrick J. Wong (2): xfs: fix per-cpu CIL structure aggregation racing with dying cpus xfs: use per-mount cpumask to track nonempty percpu inodegc lists fs/xfs/xfs_icache.c | 78 ++++++++++++++++--------------------------- fs/xfs/xfs_icache.h | 1 - fs/xfs/xfs_log_cil.c | 52 +++++++++-------------------- fs/xfs/xfs_log_priv.h | 14 ++++---- fs/xfs/xfs_mount.h | 6 ++-- fs/xfs/xfs_super.c | 5 +-- 6 files changed, 55 insertions(+), 101 deletions(-) -- 2.31.1

2 3

[PATCH v3 openEuler-23.09 0/2] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 19 Sep '23

19 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (2): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed drivers/remote_pager/Kconfig | 9 ++ drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 197 +++++++++++++----------- mm/mmap.c | 1 + 5 files changed, 117 insertions(+), 98 deletions(-) -- 2.25.1

2 3

[PATCH v2 openEuler-23.09 0/2] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 19 Sep '23

19 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (2): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed drivers/remote_pager/Kconfig | 9 ++ drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 197 +++++++++++++----------- mm/mmap.c | 1 + 5 files changed, 117 insertions(+), 98 deletions(-) -- 2.25.1

2 3

[PATCH openEuler-1.0-LTS] crypto: hisilicon/qm - prevent soft lockup in qm_poll_qp()'s loop
by w00416078 19 Sep '23

19 Sep '23

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I82LC6 CVE: NA -------------------------------- The function qm_poll_qp() may take a while due to complex req_cb, so soft lockup may occur in kernel with preemption disabled. Add a cond_resched() to prevent that. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> --- drivers/crypto/hisilicon/qm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index e0fd83465dce..739b1a6565fd 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -540,6 +540,8 @@ static void qm_poll_qp(struct hisi_qp *qp, struct hisi_qm *qm) qm_db(qm, qp->qp_id, QM_DOORBELL_CMD_CQ, qp->qp_status.cq_head, 0); atomic_dec(&qp->qp_status.used); + + cond_resched(); } /* set c_flag */ qm_db(qm, qp->qp_id, QM_DOORBELL_CMD_CQ, -- 2.30.0

2 1

[PATCH openEuler-1.0-LTS] media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
by ChenXiaoSong 19 Sep '23

19 Sep '23

From: Hyunwoo Kim <imv4bel(a)gmail.com> stable inclusion from stable-v4.19.285 commit 3e5af0745a4702ab0df2f880bfe0431eb30f9164 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I635HP CVE: CVE-2022-45887 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit 517a281338322ff8293f988771c98aaa7205e457 ] Since dvb_frontend_detach() is not called in ttusb_dec_exit_dvb(), which is called when the device is disconnected, dvb_frontend_free() is not finally called. This causes a memory leak just by repeatedly plugging and unplugging the device. Fix this issue by adding dvb_frontend_detach() to ttusb_dec_exit_dvb(). Link: https://lore.kernel.org/linux-media/20221117045925.14297-5-imv4bel@gmail.com Signed-off-by: Hyunwoo Kim <imv4bel(a)gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: ChenXiaoSong <chenxiaosong2(a)huawei.com> --- drivers/media/usb/ttusb-dec/ttusb_dec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/media/usb/ttusb-dec/ttusb_dec.c b/drivers/media/usb/ttusb-dec/ttusb_dec.c index f34efa7c61b4..c915e555897b 100644 --- a/drivers/media/usb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/usb/ttusb-dec/ttusb_dec.c @@ -1561,8 +1561,7 @@ static void ttusb_dec_exit_dvb(struct ttusb_dec *dec) dvb_dmx_release(&dec->demux); if (dec->fe) { dvb_unregister_frontend(dec->fe); - if (dec->fe->ops.release) - dec->fe->ops.release(dec->fe); + dvb_frontend_detach(dec->fe); } dvb_unregister_adapter(&dec->adapter); } -- 2.31.1

2 1

[PATCH OLK-5.10] ext4: fix rec_len verify error
by Baokun Li 19 Sep '23

19 Sep '23

From: Shida Zhang <zhangshida(a)kylinos.cn> mainline inclusion from mainline-v6.6-rc2 commit 7fda67e8c3ab6069f75888f67958a6d30454a9f6 category: bugfix bugzilla: 189039, https://gitee.com/openeuler/kernel/issues/I7OXK8 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- With the configuration PAGE_SIZE 64k and filesystem blocksize 64k, a problem occurred when more than 13 million files were directly created under a directory: EXT4-fs error (device xx): ext4_dx_csum_set:492: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): ext4_dx_csum_verify:463: inode #xxxx: comm xxxxx: dir seems corrupt? Run e2fsck -D. EXT4-fs error (device xx): dx_probe:856: inode #xxxx: block 8188: comm xxxxx: Directory index failed checksum When enough files are created, the fake_dirent->reclen will be 0xffff. it doesn't equal to the blocksize 65536, i.e. 0x10000. But it is not the same condition when blocksize equals to 4k. when enough files are created, the fake_dirent->reclen will be 0x1000. it equals to the blocksize 4k, i.e. 0x1000. The problem seems to be related to the limitation of the 16-bit field when the blocksize is set to 64k. To address this, helpers like ext4_rec_len_{from,to}_disk has already been introduced to complete the conversion between the encoded and the plain form of rec_len. So fix this one by using the helper, and all the other in this file too. Cc: stable(a)kernel.org Fixes: dbe89444042a ("ext4: Calculate and verify checksums for htree nodes") Suggested-by: Andreas Dilger <adilger(a)dilger.ca> Suggested-by: Darrick J. Wong <djwong(a)kernel.org> Signed-off-by: Shida Zhang <zhangshida(a)kylinos.cn> Reviewed-by: Andreas Dilger <adilger(a)dilger.ca> Reviewed-by: Darrick J. Wong <djwong(a)kernel.org> Link: https://lore.kernel.org/r/20230803060938.1929759-1-zhangshida@kylinos.cn Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- fs/ext4/namei.c | 26 +++++++++++++++----------- 1 file changed, 15 insertions(+), 11 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 746aed40a3c8..a01aba88c39d 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -344,17 +344,17 @@ static struct ext4_dir_entry_tail *get_dirent_tail(struct inode *inode, struct buffer_head *bh) { struct ext4_dir_entry_tail *t; + int blocksize = EXT4_BLOCK_SIZE(inode->i_sb); #ifdef PARANOID struct ext4_dir_entry *d, *top; d = (struct ext4_dir_entry *)bh->b_data; top = (struct ext4_dir_entry *)(bh->b_data + - (EXT4_BLOCK_SIZE(inode->i_sb) - - sizeof(struct ext4_dir_entry_tail))); - while (d < top && d->rec_len) + (blocksize - sizeof(struct ext4_dir_entry_tail))); + while (d < top && ext4_rec_len_from_disk(d->rec_len, blocksize)) d = (struct ext4_dir_entry *)(((void *)d) + - le16_to_cpu(d->rec_len)); + ext4_rec_len_from_disk(d->rec_len, blocksize)); if (d != top) return NULL; @@ -365,7 +365,8 @@ static struct ext4_dir_entry_tail *get_dirent_tail(struct inode *inode, #endif if (t->det_reserved_zero1 || - le16_to_cpu(t->det_rec_len) != sizeof(struct ext4_dir_entry_tail) || + (ext4_rec_len_from_disk(t->det_rec_len, blocksize) != + sizeof(struct ext4_dir_entry_tail)) || t->det_reserved_zero2 || t->det_reserved_ft != EXT4_FT_DIR_CSUM) return NULL; @@ -446,13 +447,14 @@ static struct dx_countlimit *get_dx_countlimit(struct inode *inode, struct ext4_dir_entry *dp; struct dx_root_info *root; int count_offset; + int blocksize = EXT4_BLOCK_SIZE(inode->i_sb); + unsigned int rlen = ext4_rec_len_from_disk(dirent->rec_len, blocksize); - if (le16_to_cpu(dirent->rec_len) == EXT4_BLOCK_SIZE(inode->i_sb)) + if (rlen == blocksize) count_offset = 8; - else if (le16_to_cpu(dirent->rec_len) == 12) { + else if (rlen == 12) { dp = (struct ext4_dir_entry *)(((void *)dirent) + 12); - if (le16_to_cpu(dp->rec_len) != - EXT4_BLOCK_SIZE(inode->i_sb) - 12) + if (ext4_rec_len_from_disk(dp->rec_len, blocksize) != blocksize - 12) return NULL; root = (struct dx_root_info *)(((void *)dp + 12)); if (root->reserved_zero || @@ -1261,6 +1263,7 @@ static int dx_make_map(struct inode *dir, struct buffer_head *bh, unsigned int buflen = bh->b_size; char *base = bh->b_data; struct dx_hash_info h = *hinfo; + int blocksize = EXT4_BLOCK_SIZE(dir->i_sb); if (ext4_has_metadata_csum(dir->i_sb)) buflen -= sizeof(struct ext4_dir_entry_tail); @@ -1274,11 +1277,12 @@ static int dx_make_map(struct inode *dir, struct buffer_head *bh, map_tail--; map_tail->hash = h.hash; map_tail->offs = ((char *) de - base)>>2; - map_tail->size = le16_to_cpu(de->rec_len); + map_tail->size = ext4_rec_len_from_disk(de->rec_len, + blocksize); count++; cond_resched(); } - de = ext4_next_entry(de, dir->i_sb->s_blocksize); + de = ext4_next_entry(de, blocksize); } return count; } -- 2.31.1

2 1

[PATCH openEuler-23.09 0/2] remote_pager: fix msg_handler_peer.c build failed
by Wupeng Ma 19 Sep '23

19 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> remote_pager: fix msg_handler_peer.c build failed. Chunsheng Luo (2): mmap: export __do_mmap_mm symbol remote_pager: fix msg_handler_peer.c build failed drivers/remote_pager/Kconfig | 9 ++ drivers/remote_pager/Makefile | 1 + drivers/remote_pager/main.c | 7 - drivers/remote_pager/msg_handler_peer.c | 197 +++++++++++++----------- mm/mmap.c | 1 + 5 files changed, 117 insertions(+), 98 deletions(-) -- 2.25.1

2 3

[PATCH OLK-5.10] Add new config 'CONFIG_EXT4_ERROR_REPORT' to control ext3/4 error reporting
by Baokun Li 19 Sep '23

19 Sep '23

From: Zhihao Cheng <chengzhihao1(a)huawei.com> hulk inclusion category: bugfix bugzilla: 187975, https://gitee.com/openeuler/kernel/issues/I7T77P -------------------------------- Add new config 'CONFIG_EXT4_ERROR_REPORT' to control ext3/4 error reporting. Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Signed-off-by: Baokun Li <libaokun1(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/ext4/Kconfig | 8 ++++++++ fs/ext4/ext4.h | 2 ++ fs/ext4/super.c | 19 +++++++++++++++++++ 5 files changed, 31 insertions(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index f055d8e93bc4..514d35e099f7 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -6211,6 +6211,7 @@ CONFIG_EXT4_FS=m CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ERROR_REPORT=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 9adedd9d615a..203c5e353d94 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -7308,6 +7308,7 @@ CONFIG_EXT4_FS=m CONFIG_EXT4_USE_FOR_EXT2=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_EXT4_ERROR_REPORT=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig index 86699c8cab28..ae108d47ff00 100644 --- a/fs/ext4/Kconfig +++ b/fs/ext4/Kconfig @@ -117,3 +117,11 @@ config EXT4_KUNIT_TESTS to the KUnit documentation in Documentation/dev-tools/kunit/. If unsure, say N. + +config EXT4_ERROR_REPORT + bool "Ext4 error reporting by netlink" + depends on EXT4_FS && NET + default n + help + Implement the ext3/ext4 file system error report. Report error to + userspace by netlink diff --git a/fs/ext4/ext4.h b/fs/ext4/ext4.h index 56776dea9cd1..74f72a22f5ec 100644 --- a/fs/ext4/ext4.h +++ b/fs/ext4/ext4.h @@ -46,6 +46,7 @@ #include <linux/compiler.h> +#ifdef CONFIG_EXT4_ERROR_REPORT #define NL_EXT4_ERROR_GROUP 1 #define EXT4_ERROR_MAGIC 0xAE32014U struct ext4_err_msg { @@ -54,6 +55,7 @@ struct ext4_err_msg { unsigned long s_flags; int ext4_errno; }; +#endif /* * The fourth extended filesystem constants/structures diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 4afc9dab14cf..d24816506339 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -55,9 +55,11 @@ #include "mballoc.h" #include "fsmap.h" +#ifdef CONFIG_EXT4_ERROR_REPORT #include <uapi/linux/netlink.h> #include <net/sock.h> #include <net/net_namespace.h> +#endif #define CREATE_TRACE_POINTS #include <trace/events/ext4.h> @@ -90,8 +92,10 @@ static void ext4_unregister_li_request(struct super_block *sb); static void ext4_clear_request_list(void); static struct inode *ext4_get_journal_inode(struct super_block *sb, unsigned int journal_inum); +#ifdef CONFIG_EXT4_ERROR_REPORT static void ext4_netlink_send_info(struct super_block *sb, int ext4_errno); static struct sock *ext4nl; +#endif /* * Lock ordering @@ -616,6 +620,7 @@ static void save_error_info(struct super_block *sb, int error, spin_unlock(&sbi->s_error_lock); } +#ifdef CONFIG_EXT4_ERROR_REPORT static void ext4_netlink_send_info(struct super_block *sb, int ext4_errno) { int size; @@ -651,6 +656,7 @@ static void ext4_netlink_send_info(struct super_block *sb, int ext4_errno) kfree_skb(skb); } } +#endif /* Deal with the reporting of failure conditions on a filesystem such as * inconsistencies detected or read IO failures. @@ -713,11 +719,16 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error, sb->s_id); } +#ifdef CONFIG_EXT4_ERROR_REPORT if (sb_rdonly(sb)) return; if (continue_fs) goto out; +#else + if (sb_rdonly(sb) || continue_fs) + return; +#endif ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only"); @@ -727,8 +738,10 @@ static void ext4_handle_error(struct super_block *sb, bool force_ro, int error, */ smp_wmb(); sb->s_flags |= SB_RDONLY; +#ifdef CONFIG_EXT4_ERROR_REPORT out: ext4_netlink_send_info(sb, force_ro ? 2 : 1); +#endif } static void flush_stashed_error_work(struct work_struct *work) @@ -6855,7 +6868,9 @@ wait_queue_head_t ext4__ioend_wq[EXT4_WQ_HASH_SZ]; static int __init ext4_init_fs(void) { int i, err; +#ifdef CONFIG_EXT4_ERROR_REPORT struct netlink_kernel_cfg cfg = {.groups = NL_EXT4_ERROR_GROUP,}; +#endif ratelimit_state_init(&ext4_mount_msg_ratelimit, 30 * HZ, 64); ext4_li_info = NULL; @@ -6908,9 +6923,11 @@ static int __init ext4_init_fs(void) if (err) goto out; +#ifdef CONFIG_EXT4_ERROR_REPORT ext4nl = netlink_kernel_create(&init_net, NETLINK_FILESYSTEM, &cfg); if (!ext4nl) printk(KERN_ERR "EXT4-fs: Cannot create netlink socket.\n"); +#endif return 0; out: unregister_as_ext2(); @@ -6951,7 +6968,9 @@ static void __exit ext4_exit_fs(void) ext4_exit_post_read_processing(); ext4_exit_es(); ext4_exit_pending(); +#ifdef CONFIG_EXT4_ERROR_REPORT netlink_kernel_release(ext4nl); +#endif } MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others"); -- 2.31.1

2 1

[PATCH 1/2] mmap: export __do_mmap_mm symbol
by Wupeng Ma 19 Sep '23

19 Sep '23

From: Chunsheng Luo <luochunsheng(a)huawei.com> euleros inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I7WLVX --------------------------------------------- export __do_mmap_mm symbol by referring to the earlier version Signed-off-by: Chunsheng Luo <luochunsheng(a)huawei.com> --- mm/mmap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/mmap.c b/mm/mmap.c index 2aef07b8a85e..819c37e7eb1f 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1469,6 +1469,7 @@ unsigned long __do_mmap_mm(struct mm_struct *mm, struct file *file, unsigned lon *populate = len; return addr; } +EXPORT_SYMBOL(__do_mmap_mm); unsigned long do_mmap(struct file *file, unsigned long addr, unsigned long len, unsigned long prot, unsigned long flags, -- 2.33.0

1 1

[PATCH OLK-5.10] sched/qos: Fix warning in CPU hotplug scenarios
by Xia Fukun 19 Sep '23

19 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ZMCB CVE: NA -------------------------------- CPU hotplug callbacks race against distribute_cfs_runtime(), when the QOS_SCHED feature is enabled, there may be situations where the cfs_rq-> runtime_remaining == 1 and cfs_rq is QOS_THROTTLED. Turn off the Qos_throttle when the CPU is offline. No longer allocate time to cfs_rq in this scenario to fix the warning. Fixes: 4eb6eb7941dc ("sched/qos: Don't unthrottle cfs_rq when cfs_rq is throttled by qos") Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/sched/fair.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index daa853b19853..b8bf7acb9f9a 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -5267,6 +5267,19 @@ static void distribute_cfs_runtime(struct cfs_bandwidth *cfs_b) if (!cfs_rq_throttled(cfs_rq)) goto next; + /* + * CPU hotplug callbacks race against distribute_cfs_runtime() + * when the QOS_SCHED feature is enabled, there may be + * situations where the runtime_remaining > 0. + * Qos_sched does not care whether the cfs_rq has time left, + * so no longer allocate time to cfs_rq in this scenario. + */ +#ifdef CONFIG_QOS_SCHED + if (cfs_rq->throttled == QOS_THROTTLED && + cfs_rq->runtime_remaining > 0) + goto next; +#endif + /* By the above check, this should never be true */ SCHED_WARN_ON(cfs_rq->runtime_remaining > 0); @@ -7923,6 +7936,10 @@ static __always_inline bool check_qos_cfs_rq(struct cfs_rq *cfs_rq) if (unlikely(cfs_rq && is_offline_level(cfs_rq->tg->qos_level) && !sched_idle_cpu(smp_processor_id()) && cfs_rq->h_nr_running == cfs_rq->idle_h_nr_running)) { + + if (!rq_of(cfs_rq)->online) + return false; + throttle_qos_cfs_rq(cfs_rq); return true; } -- 2.34.1

2 1

[PATCH openEuler-23.09] mm/mlock: return EINVAL for illegal user memory range in mlock
by Wupeng Ma 19 Sep '23

19 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7TW89 -------------------------------- While testing mlock, we have a problem if the len of mlock is ULONG_MAX. The return value of mlock is zero. But nothing will be locked since the len in do_mlock overflows to zero due to the following code in mlock: len = PAGE_ALIGN(len + (offset_in_page(start))); The same problem happens in munlock. Since TASK_SIZE is the maximum user space address. The start or len of mlock shouldn't be bigger than this. Function access_ok can be used to check this issue, so return -EINVAL if bigger. Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> --- mm/mlock.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/mm/mlock.c b/mm/mlock.c index 40b43f8740df..e90139d42f88 100644 --- a/mm/mlock.c +++ b/mm/mlock.c @@ -479,8 +479,6 @@ static int apply_vma_lock_flags(unsigned long start, size_t len, end = start + len; if (end < start) return -EINVAL; - if (end == start) - return 0; vma = vma_iter_load(&vmi); if (!vma) return -ENOMEM; @@ -574,9 +572,15 @@ static __must_check int do_mlock(unsigned long start, size_t len, vm_flags_t fla if (!can_do_mlock()) return -EPERM; + if (!len) + return 0; + len = PAGE_ALIGN(len + (offset_in_page(start))); start &= PAGE_MASK; + if (!len) + return -EINVAL; + lock_limit = rlimit(RLIMIT_MEMLOCK); lock_limit >>= PAGE_SHIFT; locked = len >> PAGE_SHIFT; @@ -634,8 +638,13 @@ SYSCALL_DEFINE2(munlock, unsigned long, start, size_t, len) start = untagged_addr(start); + if (!len) + return 0; + len = PAGE_ALIGN(len + (offset_in_page(start))); start &= PAGE_MASK; + if (!len) + return -EINVAL; if (mmap_write_lock_killable(current->mm)) return -EINTR; -- 2.25.1

2 1

[PATCH OLK-5.10] uacce: modify the configuration mode of device isolation stragety
by Wenkai Lin 19 Sep '23

19 Sep '23

From: Qi Tao <taoqi10(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I82ARL CVE: NA ------------------------------------------------------------------ cancel the reference counting of the accelerator device so that the device (with hardware errors) isolation stragety can also be modified while the accelerator is running a task. Signed-off-by: Qi Tao <taoqi10(a)huawei.com> Signed-off-by: JiangShui Yang <yangjiangshui(a)h-partners.com> --- drivers/misc/uacce/uacce.c | 5 ----- include/linux/uacce.h | 2 -- 2 files changed, 7 deletions(-) diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c index 21a4f5892aff..7a64eed01df7 100644 --- a/drivers/misc/uacce/uacce.c +++ b/drivers/misc/uacce/uacce.c @@ -88,7 +88,6 @@ static int uacce_put_queue(struct uacce_queue *q) uacce->ops->put_queue(q); q->state = UACCE_Q_ZOMBIE; - atomic_dec(&uacce->ref); return 0; } @@ -348,7 +347,6 @@ static int uacce_fops_open(struct inode *inode, struct file *filep) goto out_with_bond; } - atomic_inc(&uacce->ref); init_waitqueue_head(&q->wait); filep->private_data = q; q->state = UACCE_Q_INIT; @@ -821,9 +819,6 @@ static ssize_t isolate_strategy_store(struct device *dev, struct device_attribut if (val > UACCE_MAX_ERR_THRESHOLD) return -EINVAL; - if (atomic_read(&uacce->ref)) - return -EBUSY; - ret = uacce->ops->isolate_err_threshold_write(uacce, val); if (ret) return ret; diff --git a/include/linux/uacce.h b/include/linux/uacce.h index 8187c1bda236..9b0c04a9cff7 100644 --- a/include/linux/uacce.h +++ b/include/linux/uacce.h @@ -148,7 +148,6 @@ struct uacce_queue { * @mutex: protects uacce operation * @priv: private pointer of the uacce * @queues: list of queues - * @ref: reference of the uacce */ struct uacce_device { const char *algs; @@ -164,7 +163,6 @@ struct uacce_device { struct device dev; struct mutex mutex; void *priv; - atomic_t ref; struct uacce_err_isolate *isolate; struct list_head queues; }; -- 2.30.0

2 1

[PATCH OLK-5.10 v2] jbd2: Fix potential data lost in recovering journal raced with synchronizing fs bdev
by Zhihao Cheng 19 Sep '23

19 Sep '23

maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I828EV CVE: NA Reference: https://lore.kernel.org/linux-ext4/20230911155822.kbg2xayc7ys24kay@quack3/T… -------------------------------- JBD2 makes sure journal data is fallen on fs device by sync_blockdev(), however, other process could intercept the EIO information from bdev's mapping, which leads journal recovering successful even EIO occurs during data written back to fs device. We found this problem in our product, iscsi + multipath is chosen for block device of ext4. Unstable network may trigger kpartx to rescan partitions in device mapper layer. Detailed process is shown as following: mount kpartx irq jbd2_journal_recover do_one_pass memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal mark_buffer_dirty // mark bh dirty vfs_read generic_file_read_iter // dio filemap_write_and_wait_range __filemap_fdatawrite_range do_writepages block_write_full_folio submit_bh_wbc >> EIO occurs in disk << end_buffer_async_write mark_buffer_write_io_error mapping_set_error set_bit(AS_EIO, &mapping->flags) // set! filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // clear! err2 = sync_blockdev filemap_write_and_wait filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // false err2 = 0 Filesystem is mounted successfully even data from journal is failed written into disk, and ext4/ocfs2 could become corrupted. Fix it by comparing the wb_err state in fs block device before recovering and after recovering. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888 Cc: stable(a)vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Signed-off-by: Zhang Yi <yi.zhang(a)huawei.com> --- v1->v3: Initialize wb_err. Untialized wb_err could be same with mapping->wb_err(eg. EIO without ERRSEQ_SEEN). When EIO occurs again, mapping->wb_err won't be changed, and wb_err is still same with mapping->wb_err. fs/jbd2/recovery.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 9e4537349380..cdf4c553f058 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -292,6 +292,8 @@ int jbd2_journal_recover(journal_t *journal) journal_superblock_t * sb; struct recovery_info info; + errseq_t wb_err; + struct address_space *mapping; memset(&info, 0, sizeof(info)); sb = journal->j_superblock; @@ -309,6 +311,9 @@ int jbd2_journal_recover(journal_t *journal) return 0; } + wb_err = 0; + mapping = journal->j_fs_dev->bd_inode->i_mapping; + errseq_check_and_advance(&mapping->wb_err, &wb_err); err = do_one_pass(journal, &info, PASS_SCAN); if (!err) err = do_one_pass(journal, &info, PASS_REVOKE); @@ -327,6 +332,9 @@ int jbd2_journal_recover(journal_t *journal) jbd2_journal_clear_revoke(journal); err2 = sync_blockdev(journal->j_fs_dev); + if (!err) + err = err2; + err2 = errseq_check_and_advance(&mapping->wb_err, &wb_err); if (!err) err = err2; /* Make sure all replayed data is on permanent storage */ -- 2.31.1

2 1

[PATCH openEuler-23.09] config: Disable x86 IBT for kpatch
by Wei Li 19 Sep '23

19 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I82GQG -------------------------------- The CONFIG_X86_KERNEL_IBT option causes the compiled symbols to lack the __prefix__ symbol, leading kpatch to incorrectly determine that the symbol has no padding. In reality, the symbol does have padding, resulting in a compilation failure for kpatch. Let's disable IBT for now. Signed-off-by: Wei Li <liwei391(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 6bbaaaa82a0b..d3c0da3ddd64 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -457,7 +457,7 @@ CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_X86_UMIP=y -CONFIG_X86_KERNEL_IBT=y +# CONFIG_X86_KERNEL_IBT is not set CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_X86_INTEL_TSX_MODE_OFF=y # CONFIG_X86_INTEL_TSX_MODE_ON is not set -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] crypto:hisilicon/qm - cache write back before flr and poweroff
by w00416078 19 Sep '23

19 Sep '23

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4YKIJ CVE: NA -------------------------------- In order to prevent an error when the hardware writes back cache, the driver should write back the hardware cache before flr and poweroff. If vfs is enabled, we should process abnormal scenes of the whole vfs. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Weili Qian <qianweili(a)huawei.com> Reviewed-by: Ling Mingqiang <lingmingqiang(a)huawei.com> Acked-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- drivers/crypto/hisilicon/qm.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-) diff --git a/drivers/crypto/hisilicon/qm.c b/drivers/crypto/hisilicon/qm.c index 8fa855fd2387..e0fd83465dce 100644 --- a/drivers/crypto/hisilicon/qm.c +++ b/drivers/crypto/hisilicon/qm.c @@ -2772,6 +2772,8 @@ void hisi_qm_dev_shutdown(struct pci_dev *pdev) ret = hisi_qm_stop(qm, QM_NORMAL); if (ret) dev_err(&pdev->dev, "Fail to stop qm in shutdown!\n"); + + hisi_qm_cache_wb(qm); } EXPORT_SYMBOL_GPL(hisi_qm_dev_shutdown); @@ -3718,12 +3720,16 @@ static int qm_vf_reset_prepare(struct pci_dev *pdev, pci_save_state(dev); ret = hisi_qm_stop(qm, stop_reason); - if (ret) - goto prepare_fail; + if (ret) { + hisi_qm_set_hw_reset(qm, + QM_RESET_STOP_TX_OFFSET); + hisi_qm_set_hw_reset(qm, + QM_RESET_STOP_RX_OFFSET); + atomic_set(&qm->status.flags, QM_STOP); + } } } -prepare_fail: mutex_unlock(&qm_list->lock); return ret; } @@ -4117,19 +4123,26 @@ void hisi_qm_reset_prepare(struct pci_dev *pdev) if (qm->vfs_num) { ret = qm_vf_reset_prepare(pdev, qm->qm_list, QM_FLR); - if (ret) { - pci_err(pdev, "Fails to prepare reset!\n"); - return; - } + if (ret) + pci_err(pdev, "Failed to stop vfs!\n"); } ret = hisi_qm_stop(qm, QM_FLR); if (ret) { - pci_err(pdev, "Fails to stop QM!\n"); - return; + pci_err(pdev, "Failed to stop QM!\n"); + goto err_prepare; } + hisi_qm_cache_wb(qm); pci_info(pdev, "FLR resetting...\n"); + return; + +err_prepare: + pci_info(pdev, "FLR resetting prepare failed!\n"); + hisi_qm_set_hw_reset(qm, QM_RESET_STOP_TX_OFFSET); + hisi_qm_set_hw_reset(qm, QM_RESET_STOP_RX_OFFSET); + atomic_set(&qm->status.flags, QM_STOP); + hisi_qm_cache_wb(qm); } EXPORT_SYMBOL_GPL(hisi_qm_reset_prepare); -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS v2 00/11] Fix booting failure on arm64
by Wei Li 18 Sep '23

18 Sep '23

The arm64 test machine boot failed when using hulk_defconfig after d63c76835476 ("arm64: efi: Execute runtime services from a dedicated stack"), revert this patch set first for weekly release. Wei Li (11): Revert "arm64: efi: Make efi_rt_lock a raw_spinlock" Revert "efi: rt-wrapper: Add missing include" Revert "arm64: efi: Recover from synchronous exceptions occurring in firmware" Revert "arm64: efi: Execute runtime services from a dedicated stack" Revert "efi: fix userspace infinite retry read efivars after EFI runtime services page fault" Revert "arm64: efi: Restore register x18 if it was corrupted" Revert "x86/efi: fix a -Wtype-limits compilation warning" Revert "efi: Fix build error due to enum collision between efi.h and ima.h" Revert "efi: Fix debugobjects warning on 'efi_rts_work'" Revert "efi/x86: Handle page faults occurring while running EFI runtime services" Revert "efi: Make efi_rts_work accessible to efi page fault handler" arch/arm64/include/asm/efi.h | 12 --- arch/arm64/kernel/efi-rt-wrapper.S | 49 +---------- arch/arm64/kernel/efi.c | 50 ----------- arch/arm64/mm/fault.c | 4 - arch/x86/include/asm/efi.h | 1 - arch/x86/mm/fault.c | 9 -- arch/x86/platform/efi/quirks.c | 78 ----------------- drivers/firmware/efi/runtime-wrappers.c | 109 +++++++++++++++--------- include/linux/efi.h | 42 --------- 9 files changed, 70 insertions(+), 284 deletions(-) -- 2.25.1

2 12

[PATCH openEuler-1.0-LTS] crypto:hisilicon/sec - modify hw endian config
by w00416078 18 Sep '23

18 Sep '23

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4YKLC CVE: NA -------------------------------- When the endian configuration of the hardware is abnormal, it will affect the normal function. Currently the soft configuration method can't restore the faulty device. The endian needs to be configured according to the system properties. So fix it. Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Kai Ye <yekai13(a)huawei.com> Reviewed-by: Ling Mingqiang <lingmingqiang(a)huawei.com> Acked-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- drivers/crypto/hisilicon/sec2/sec_main.c | 36 +++++++----------------- 1 file changed, 10 insertions(+), 26 deletions(-) diff --git a/drivers/crypto/hisilicon/sec2/sec_main.c b/drivers/crypto/hisilicon/sec2/sec_main.c index 58f726ba022f..a568d5363c1e 100644 --- a/drivers/crypto/hisilicon/sec2/sec_main.c +++ b/drivers/crypto/hisilicon/sec2/sec_main.c @@ -255,33 +255,19 @@ static const struct pci_device_id sec_dev_ids[] = { }; MODULE_DEVICE_TABLE(pci, sec_dev_ids); -static u8 sec_get_endian(struct hisi_qm *qm) +static void sec_set_endian(struct hisi_qm *qm) { u32 reg; - /* - * As for VF, it is a wrong way to get endian setting by - * reading a register of the engine - */ - if (qm->pdev->is_virtfn) { - dev_err_ratelimited(&qm->pdev->dev, - "cannot access a register in VF!\n"); - return SEC_LE; - } - reg = readl_relaxed(qm->io_base + SEC_ENGINE_PF_CFG_OFF + - SEC_ACC_COMMON_REG_OFF + SEC_CONTROL_REG); - - /* BD little endian mode */ - if (!(reg & BIT(0))) - return SEC_LE; + reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); + reg &= ~(BIT(1) | BIT(0)); + if (IS_ENABLED(CONFIG_64BIT)) + reg |= BIT(1); - /* BD 32-bits big endian mode */ - else if (!(reg & BIT(1))) - return SEC_32BE; + if (IS_ENABLED(CONFIG_CPU_BIG_ENDIAN)) + reg |= BIT(0); - /* BD 64-bits big endian mode */ - else - return SEC_64BE; + writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); } static int sec_engine_init(struct hisi_qm *qm) @@ -331,9 +317,7 @@ static int sec_engine_init(struct hisi_qm *qm) SEC_ADDR(qm, SEC_BD_ERR_CHK_EN_REG3)); /* config endian */ - reg = readl_relaxed(SEC_ADDR(qm, SEC_CONTROL_REG)); - reg |= sec_get_endian(qm); - writel_relaxed(reg, SEC_ADDR(qm, SEC_CONTROL_REG)); + sec_set_endian(qm); return 0; } @@ -813,7 +797,7 @@ static int sec_qm_pre_init(struct hisi_qm *qm, struct pci_dev *pdev) { int ret; - qm->algs = "sec\ncipher\ndigest\naead\n"; + qm->algs = "cipher\ndigest\naead\n"; qm->uacce_mode = uacce_mode; qm->pdev = pdev; ret = hisi_qm_pre_init(qm, pf_q_num, SEC_PF_DEF_Q_BASE); -- 2.34.1

2 1

[PATCH OLK-5.10 0/2] Not clear ATA_PFLAG_EH_PENDING and not thaw the port twice in ata_eh_reset()
by Xingui Yang 18 Sep '23

18 Sep '23

Clear port pending interrupts before reset, as per AHCI specifications (Szuying). Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to continue on with other actions recorded with error interrupts triggered before EH completes. A~Nd an additional fix to avoid thawing a port twice in EH (Niklas). Niklas Cassel (2): ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() ata: libata-eh: do not thaw the port twice in ata_eh_reset() drivers/ata/libata-eh.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) -- 2.17.1

2 3

[PATCH OLK-5.10 0/2] Not clear ATA_PFLAG_EH_PENDING and not thaw the port twice in ata_eh_reset()
by Xingui Yang 18 Sep '23

18 Sep '23

Clear port pending interrupts before reset, as per AHCI specifications (Szuying). Followup fixes for this one are to not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() to allow EH to continue on with other actions recorded with error interrupts triggered before EH completes. A~Nd an additional fix to avoid thawing a port twice in EH (Niklas). Niklas Cassel (2): ata: libata-eh: do not clear ATA_PFLAG_EH_PENDING in ata_eh_reset() ata: libata-eh: do not thaw the port twice in ata_eh_reset() drivers/ata/libata-eh.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) -- 2.17.1

2 3

[PATCH openEuler-1.0-LTS v1 0/3] Fix booting failure on arm64
by Wei Li 18 Sep '23

18 Sep '23

The arm64 test machine boot failed when using hulk_defconfig after d63c76835476 ("arm64: efi: Execute runtime services from a dedicated stack"), revert it first for weekly release. Wei Li (3): Revert "arm64: efi: Make efi_rt_lock a raw_spinlock" Revert "arm64: efi: Recover from synchronous exceptions occurring in firmware" Revert "arm64: efi: Execute runtime services from a dedicated stack" arch/arm64/include/asm/efi.h | 12 ------ arch/arm64/kernel/efi-rt-wrapper.S | 39 ++----------------- arch/arm64/kernel/efi.c | 50 ------------------------- arch/arm64/mm/fault.c | 4 -- drivers/firmware/efi/runtime-wrappers.c | 1 - 5 files changed, 3 insertions(+), 103 deletions(-) -- 2.25.1

2 4

[PATCH OLK-5.10] jbd2: Fix potential data lost in recovering journal raced with synchronizing fs bdev
by Zhihao Cheng 18 Sep '23

18 Sep '23

maillist inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I828EV CVE: NA Reference: https://lore.kernel.org/linux-ext4/20230911155822.kbg2xayc7ys24kay@quack3/T… -------------------------------- JBD2 makes sure journal data is fallen on fs device by sync_blockdev(), however, other process could intercept the EIO information from bdev's mapping, which leads journal recovering successful even EIO occurs during data written back to fs device. We found this problem in our product, iscsi + multipath is chosen for block device of ext4. Unstable network may trigger kpartx to rescan partitions in device mapper layer. Detailed process is shown as following: mount kpartx irq jbd2_journal_recover do_one_pass memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal mark_buffer_dirty // mark bh dirty vfs_read generic_file_read_iter // dio filemap_write_and_wait_range __filemap_fdatawrite_range do_writepages block_write_full_folio submit_bh_wbc >> EIO occurs in disk << end_buffer_async_write mark_buffer_write_io_error mapping_set_error set_bit(AS_EIO, &mapping->flags) // set! filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // clear! err2 = sync_blockdev filemap_write_and_wait filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // false err2 = 0 Filesystem is mounted successfully even data from journal is failed written into disk, and ext4/ocfs2 could become corrupted. Fix it by comparing the wb_err state in fs block device before recovering and after recovering. Fetch a reproducer in [Link]. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888 Cc: stable(a)vger.kernel.org Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Signed-off-by: Zhang Yi <yi.zhang(a)huawei.com> --- fs/jbd2/recovery.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 9e4537349380..361c37ef1f8a 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -292,6 +292,8 @@ int jbd2_journal_recover(journal_t *journal) journal_superblock_t * sb; struct recovery_info info; + errseq_t wb_err; + struct address_space *mapping; memset(&info, 0, sizeof(info)); sb = journal->j_superblock; @@ -309,6 +311,8 @@ int jbd2_journal_recover(journal_t *journal) return 0; } + mapping = journal->j_fs_dev->bd_inode->i_mapping; + errseq_check_and_advance(&mapping->wb_err, &wb_err); err = do_one_pass(journal, &info, PASS_SCAN); if (!err) err = do_one_pass(journal, &info, PASS_REVOKE); @@ -327,6 +331,9 @@ int jbd2_journal_recover(journal_t *journal) jbd2_journal_clear_revoke(journal); err2 = sync_blockdev(journal->j_fs_dev); + if (!err) + err = err2; + err2 = errseq_check_and_advance(&mapping->wb_err, &wb_err); if (!err) err = err2; /* Make sure all replayed data is on permanent storage */ -- 2.31.1

2 1

[PATCH v2 openEuler-23.09] ima: fix parser strategy unable to manually import kernel
by Zhou Shuiqing 18 Sep '23

18 Sep '23

euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I822F4 CVE: NA ------------------------------------------------- This patch is to fix parser strategy unable to manually import kernel v2: -fix code indentation Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> Reviewed-by: Huaxin Lu <luhuaxin1(a)huawei.com> --- security/integrity/ima/ima_policy.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index 81a727a3f..80bf1dc80 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -1376,7 +1376,7 @@ static bool ima_validate_rule(struct ima_rule_entry *entry) entry->flags & (IMA_DIGSIG_REQUIRED | IMA_MODSIG_ALLOWED | #ifdef CONFIG_IMA_DIGEST_LIST IMA_CHECK_BLACKLIST | IMA_VALIDATE_ALGOS | - IMA_META_IMMUTABLE_REQUIRED | IMA_PARSER)) + IMA_META_IMMUTABLE_REQUIRED)) #else IMA_CHECK_BLACKLIST | IMA_VALIDATE_ALGOS)) #endif @@ -1416,7 +1416,8 @@ static bool ima_validate_rule(struct ima_rule_entry *entry) IMA_FGROUP | IMA_DIGSIG_REQUIRED | IMA_PERMIT_DIRECTIO | IMA_VALIDATE_ALGOS | #ifdef CONFIG_IMA_DIGEST_LIST - IMA_VERITY_REQUIRED | IMA_META_IMMUTABLE_REQUIRED)) + IMA_VERITY_REQUIRED | + IMA_META_IMMUTABLE_REQUIRED | IMA_PARSER)) #else IMA_VERITY_REQUIRED)) #endif -- 2.33.0

2 1

[PATCH openEuler-23.09] ima: modify the CONFIG configuration of x86_64
by Zhou Shuiqing 18 Sep '23

18 Sep '23

euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8264X CVE: NA ------------------------------------------------- This patch is to modify the CONFIG configuration of x86_64. Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 5f4d70de3..5bdd03c9f 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -4368,18 +4368,18 @@ CONFIG_TCG_TIS_SPI=y # CONFIG_TCG_TIS_SPI_CR50 is not set CONFIG_TCG_TIS_I2C=m CONFIG_TCG_TIS_I2C_CR50=m -CONFIG_TCG_TIS_I2C_ATMEL=y -CONFIG_TCG_TIS_I2C_INFINEON=y -CONFIG_TCG_TIS_I2C_NUVOTON=y -CONFIG_TCG_NSC=y -CONFIG_TCG_ATMEL=y -CONFIG_TCG_INFINEON=y +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m CONFIG_TCG_XEN=m CONFIG_TCG_CRB=y CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=y -CONFIG_TCG_TIS_ST33ZP24_I2C=y -CONFIG_TCG_TIS_ST33ZP24_SPI=y +CONFIG_TCG_TIS_ST33ZP24=m +CONFIG_TCG_TIS_ST33ZP24_I2C=m +CONFIG_TCG_TIS_ST33ZP24_SPI=m CONFIG_TELCLOCK=m CONFIG_XILLYBUS_CLASS=m CONFIG_XILLYBUS=m -- 2.33.0

2 1

[PATCH openEuler-23.09] ima: modify the CONFIG configuration of x86_64
by Zhou Shuiqing 18 Sep '23

18 Sep '23

euleros inclusion category: bugfix bugzilla:https://gitee.com/openeuler/kernel/issues/I8264X CVE: NA ------------------------------------------------- This patch is to modify the CONFIG configuration of x86_64. Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 5f4d70de3..5bdd03c9f 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -4368,18 +4368,18 @@ CONFIG_TCG_TIS_SPI=y # CONFIG_TCG_TIS_SPI_CR50 is not set CONFIG_TCG_TIS_I2C=m CONFIG_TCG_TIS_I2C_CR50=m -CONFIG_TCG_TIS_I2C_ATMEL=y -CONFIG_TCG_TIS_I2C_INFINEON=y -CONFIG_TCG_TIS_I2C_NUVOTON=y -CONFIG_TCG_NSC=y -CONFIG_TCG_ATMEL=y -CONFIG_TCG_INFINEON=y +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m CONFIG_TCG_XEN=m CONFIG_TCG_CRB=y CONFIG_TCG_VTPM_PROXY=m -CONFIG_TCG_TIS_ST33ZP24=y -CONFIG_TCG_TIS_ST33ZP24_I2C=y -CONFIG_TCG_TIS_ST33ZP24_SPI=y +CONFIG_TCG_TIS_ST33ZP24=m +CONFIG_TCG_TIS_ST33ZP24_I2C=m +CONFIG_TCG_TIS_ST33ZP24_SPI=m CONFIG_TELCLOCK=m CONFIG_XILLYBUS_CLASS=m CONFIG_XILLYBUS=m -- 2.33.0

2 1

[PATCH openEuler-23.09] livepatch: Enable livepatch configs in openeuler_defconfig
by Zheng Yejian 18 Sep '23

18 Sep '23

hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I826DM CVE: NA -------------------------------- Enable the same livepatch configures for x86_64 and arm64 as that in openEuler-22.03-LTS. Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 12 ++++++++++++ arch/x86/configs/openeuler_defconfig | 9 +++++++++ 2 files changed, 21 insertions(+) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6c6cd4701f92..7e95287b4716 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -332,6 +332,18 @@ CONFIG_ARCH_XGENE=y # CONFIG_ARCH_ZYNQMP is not set # end of Platform selection +CONFIG_HAVE_LIVEPATCH_WO_FTRACE=y + +# +# Enable Livepatch +# +CONFIG_LIVEPATCH=y +CONFIG_LIVEPATCH_WO_FTRACE=y +CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY=y +# CONFIG_LIVEPATCH_STACK is not set +CONFIG_LIVEPATCH_RESTRICT_KPROBE=y +# end of Enable Livepatch + # # Kernel Features # diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index 5f4d70de32f9..0f30eb56c31b 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -502,8 +502,17 @@ CONFIG_LEGACY_VSYSCALL_XONLY=y CONFIG_MODIFY_LDT_SYSCALL=y # CONFIG_STRICT_SIGALTSTACK_SIZE is not set CONFIG_HAVE_LIVEPATCH_WO_FTRACE=y + +# +# Enable Livepatch +# CONFIG_LIVEPATCH=y +# CONFIG_LIVEPATCH_FTRACE is not set CONFIG_LIVEPATCH_WO_FTRACE=y +CONFIG_LIVEPATCH_STOP_MACHINE_CONSISTENCY=y +# CONFIG_LIVEPATCH_STACK is not set +CONFIG_LIVEPATCH_RESTRICT_KPROBE=y +# end of Enable Livepatch # end of Processor type and features CONFIG_FUNCTION_PADDING_CFI=11 -- 2.25.1

2 1

[PATCH OLK-5.10] zram: correctly handle all next_arg() cases
by Jinjiang Tu 18 Sep '23

18 Sep '23

From: Sergey Senozhatsky <senozhatsky(a)chromium.org> mainline inclusion from mainline-v6.3-rc1 commit df32de1433412621b92daf1b3369ac053214031e category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I822Z8 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… ------------------------------------------- When supplied buffer does not have assignment sign next_arg() sets `val` pointer to NULL, so we cannot dereference it. Add a NULL pointer test to handle `param` case, in addition to `*val` test, which handles cases when param has no value assigned to it: `param=`. Link: https://lkml.kernel.org/r/20230103030119.1496358-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky(a)chromium.org> Cc: Minchan Kim <minchan(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- drivers/block/zram/zram_drv.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c index e332b4d55359..955f0c4d358f 100644 --- a/drivers/block/zram/zram_drv.c +++ b/drivers/block/zram/zram_drv.c @@ -1123,7 +1123,7 @@ static ssize_t recomp_algorithm_store(struct device *dev, while (*args) { args = next_arg(args, &param, &val); - if (!*val) + if (!val || !*val) return -EINVAL; if (!strcmp(param, "algo")) { @@ -1800,7 +1800,7 @@ static ssize_t recompress_store(struct device *dev, while (*args) { args = next_arg(args, &param, &val); - if (!*val) + if (!val || !*val) return -EINVAL; if (!strcmp(param, "type")) { -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS] nvme-pci: fix mempool alloc size
by Yong Hu 18 Sep '23

18 Sep '23

From: Keith Busch <kbusch(a)kernel.org> stable inclusion from stable-v5.10.163 commit dfb6d54893d544151e7f480bc44cfe7823f5ad23 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7PZZC Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… -------------------------------- [ Upstream commit c89a529e823d51dd23c7ec0c047c7a454a428541 ] Convert the max size to bytes to match the units of the divisor that calculates the worst-case number of PRP entries. The result is used to determine how many PRP Lists are required. The code was previously rounding this to 1 list, but we can require 2 in the worst case. In that scenario, the driver would corrupt memory beyond the size provided by the mempool. While unlikely to occur (you'd need a 4MB in exactly 127 phys segments on a queue that doesn't support SGLs), this memory corruption has been observed by kfence. Cc: Jens Axboe <axboe(a)kernel.dk> Fixes: 943e942e6266f ("nvme-pci: limit max IO size and segments to avoid high order allocations") Signed-off-by: Keith Busch <kbusch(a)kernel.org> Reviewed-by: Jens Axboe <axboe(a)kernel.dk> Reviewed-by: Kanchan Joshi <joshi.k(a)samsung.com> Reviewed-by: Chaitanya Kulkarni <kch(a)nvidia.com> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yong Hu <yong.hu(a)windriver.com> --- drivers/nvme/host/pci.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index bbf6ce4b82ac..e805a9813628 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -371,8 +371,8 @@ static bool nvme_dbbuf_update_and_check_event(u16 value, u32 *dbbuf_db, */ static int nvme_pci_npages_prp(void) { - unsigned nprps = DIV_ROUND_UP(NVME_MAX_KB_SZ + NVME_CTRL_PAGE_SIZE, - NVME_CTRL_PAGE_SIZE); + unsigned max_bytes = (NVME_MAX_KB_SZ * 1024) + NVME_CTRL_PAGE_SIZE; + unsigned nprps = DIV_ROUND_UP(max_bytes, NVME_CTRL_PAGE_SIZE); return DIV_ROUND_UP(8 * nprps, PAGE_SIZE - 8); } -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP2] nvme-pci: fix timeout request state check
by Yong Hu 18 Sep '23

18 Sep '23

From: Keith Busch <kbusch(a)kernel.org> stable inclusion from stable-v5.10.166 commit 5f10f7efe0fc97c0ee2112a1032914f6fb2f940c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7R4BC CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 1c5842085851f786eba24a39ecd02650ad892064 ] Polling the completion can progress the request state to IDLE, either inline with the completion, or through softirq. Either way, the state may not be COMPLETED, so don't check for that. We only care if the state isn't IN_FLIGHT. This is fixing an issue where the driver aborts an IO that we just completed. Seeing the "aborting" message instead of "polled" is very misleading as to where the timeout problem resides. Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq") Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yong Hu <yong.hu(a)windriver.com> --- drivers/nvme/host/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index ac5745d8dd2b..f1ac50c7a1d6 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1292,7 +1292,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) else nvme_poll_irqdisable(nvmeq); - if (blk_mq_request_completed(req)) { + if (blk_mq_rq_state(req) != MQ_RQ_IN_FLIGHT) { dev_warn(dev->ctrl.device, "I/O %d QID %d timeout, completion polled\n", req->tag, nvmeq->qid); -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS] nvme-pci: fix timeout request state check
by Yong Hu 18 Sep '23

18 Sep '23

From: Keith Busch <kbusch(a)kernel.org> stable inclusion from stable-v5.10.166 commit 5f10f7efe0fc97c0ee2112a1032914f6fb2f940c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7R4BC CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 1c5842085851f786eba24a39ecd02650ad892064 ] Polling the completion can progress the request state to IDLE, either inline with the completion, or through softirq. Either way, the state may not be COMPLETED, so don't check for that. We only care if the state isn't IN_FLIGHT. This is fixing an issue where the driver aborts an IO that we just completed. Seeing the "aborting" message instead of "polled" is very misleading as to where the timeout problem resides. Fixes: bf392a5dc02a9b ("nvme-pci: Remove tag from process cq") Signed-off-by: Keith Busch <kbusch(a)kernel.org> Signed-off-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yong Hu <yong.hu(a)windriver.com> --- drivers/nvme/host/pci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index fbbbfdea076a..bbf6ce4b82ac 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -1291,7 +1291,7 @@ static enum blk_eh_timer_return nvme_timeout(struct request *req, bool reserved) else nvme_poll_irqdisable(nvmeq); - if (blk_mq_request_completed(req)) { + if (blk_mq_rq_state(req) != MQ_RQ_IN_FLIGHT) { dev_warn(dev->ctrl.device, "I/O %d QID %d timeout, completion polled\n", req->tag, nvmeq->qid); -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP1] netfilter: nftables: exthdr: fix 4-byte stack OOB write
by Guo Mengqi 18 Sep '23

18 Sep '23

From: Florian Westphal <fw(a)strlen.de> mainline inclusion from mainline-v6.6-rc1 commit fd94d9dadee58e09b49075240fe83423eb1dcd36 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I80I0G CVE: CVE-2023-4881 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- If priv->len is a multiple of 4, then dst[len / 4] can write past the destination array which leads to stack corruption. This construct is necessary to clean the remainder of the register in case ->len is NOT a multiple of the register size, so make it conditional just like nft_payload.c does. The bug was added in 4.1 cycle and then copied/inherited when tcp/sctp and ip option support was added. Bug reported by Zero Day Initiative project (ZDI-CAN-21950, ZDI-CAN-21951, ZDI-CAN-21961). Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Fixes: 935b7f643018 ("netfilter: nft_exthdr: add TCP option matching") Fixes: 133dc203d77d ("netfilter: nft_exthdr: Support SCTP chunks") Fixes: dbb5281a1f84 ("netfilter: nf_tables: add support for matching IPv4 options") Signed-off-by: Florian Westphal <fw(a)strlen.de> Conflicts: net/netfilter/nft_exthdr.c Signed-off-by: Zhengchao Shao <shaozhengchao(a)huawei.com> --- net/netfilter/nft_exthdr.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c index 670dd146fb2b..ca268293cfa1 100644 --- a/net/netfilter/nft_exthdr.c +++ b/net/netfilter/nft_exthdr.c @@ -33,6 +33,14 @@ static unsigned int optlen(const u8 *opt, unsigned int offset) return opt[offset + 1]; } +static int nft_skb_copy_to_reg(const struct sk_buff *skb, int offset, u32 *dest, unsigned int len) +{ + if (len % NFT_REG32_SIZE) + dest[len / NFT_REG32_SIZE] = 0; + + return skb_copy_bits(skb, offset, dest, len); +} + static void nft_exthdr_ipv6_eval(const struct nft_expr *expr, struct nft_regs *regs, const struct nft_pktinfo *pkt) @@ -54,8 +62,7 @@ static void nft_exthdr_ipv6_eval(const struct nft_expr *expr, } offset += priv->offset; - dest[priv->len / NFT_REG32_SIZE] = 0; - if (skb_copy_bits(pkt->skb, offset, dest, priv->len) < 0) + if (nft_skb_copy_to_reg(pkt->skb, offset, dest, priv->len) < 0) goto err; return; err: @@ -151,8 +158,7 @@ static void nft_exthdr_ipv4_eval(const struct nft_expr *expr, } offset += priv->offset; - dest[priv->len / NFT_REG32_SIZE] = 0; - if (skb_copy_bits(pkt->skb, offset, dest, priv->len) < 0) + if (nft_skb_copy_to_reg(pkt->skb, offset, dest, priv->len) < 0) goto err; return; err: @@ -208,7 +214,8 @@ static void nft_exthdr_tcp_eval(const struct nft_expr *expr, if (priv->flags & NFT_EXTHDR_F_PRESENT) { *dest = 1; } else { - dest[priv->len / NFT_REG32_SIZE] = 0; + if (priv->len % NFT_REG32_SIZE) + dest[priv->len / NFT_REG32_SIZE] = 0; memcpy(dest, opt + offset, priv->len); } -- 2.17.1

2 1

[PATCH openEuler-23.09] ima: fix parser strategy unable to manually import kernel
by Zhou Shuiqing 18 Sep '23

18 Sep '23

From: zhoushuiqing <zhoushuiqing2(a)huawei.com> euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I822F4 CVE: NA ------------------------------------------------- This patch is to fix parser strategy unable to manually import kernel Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> Reviewed-by: Huaxin Lu <luhuaxin1(a)huawei.com> --- security/integrity/ima/ima_policy.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/security/integrity/ima/ima_policy.c b/security/integrity/ima/ima_policy.c index 81a727a3f..ca87605e5 100644 --- a/security/integrity/ima/ima_policy.c +++ b/security/integrity/ima/ima_policy.c @@ -1376,7 +1376,7 @@ static bool ima_validate_rule(struct ima_rule_entry *entry) entry->flags & (IMA_DIGSIG_REQUIRED | IMA_MODSIG_ALLOWED | #ifdef CONFIG_IMA_DIGEST_LIST IMA_CHECK_BLACKLIST | IMA_VALIDATE_ALGOS | - IMA_META_IMMUTABLE_REQUIRED | IMA_PARSER)) + IMA_META_IMMUTABLE_REQUIRED)) #else IMA_CHECK_BLACKLIST | IMA_VALIDATE_ALGOS)) #endif @@ -1416,7 +1416,8 @@ static bool ima_validate_rule(struct ima_rule_entry *entry) IMA_FGROUP | IMA_DIGSIG_REQUIRED | IMA_PERMIT_DIRECTIO | IMA_VALIDATE_ALGOS | #ifdef CONFIG_IMA_DIGEST_LIST - IMA_VERITY_REQUIRED | IMA_META_IMMUTABLE_REQUIRED)) + IMA_VERITY_REQUIRED | + IMA_META_IMMUTABLE_REQUIRED | IMA_PARSER)) #else IMA_VERITY_REQUIRED)) #endif -- 2.33.0

2 1

[PATCH OLK-5.10] livepatch/core: Fix possible issue that old function is not checked
by Zheng Yejian 18 Sep '23

18 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ZH67 CVE: NA -------------------------------- After patch being enabled, the first few instructions would be modified to jump to the new function, then callers of old function would jump to new function but always through the old function. Therefore when enabling a new patch or disable a patch on the old function, we should always consider that old function is running. Otherwise, there may be situations where old functions are being modified before jumping to new function and cause issues. Signed-off-by: Zheng Yejian <zhengyejian1(a)huawei.com> --- arch/arm/kernel/livepatch.c | 24 +++++++++++++++++++++--- arch/arm64/kernel/livepatch.c | 24 +++++++++++++++++++++--- arch/powerpc/kernel/livepatch_32.c | 24 +++++++++++++++++++++--- arch/x86/kernel/livepatch.c | 25 +++++++++++++++++++++---- 4 files changed, 84 insertions(+), 13 deletions(-) diff --git a/arch/arm/kernel/livepatch.c b/arch/arm/kernel/livepatch.c index b4d26474ba33..b1711d947dfe 100644 --- a/arch/arm/kernel/livepatch.c +++ b/arch/arm/kernel/livepatch.c @@ -134,12 +134,17 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, struct klp_object *obj; struct klp_func_node *func_node; struct klp_func *func; - unsigned long func_addr, func_size; + unsigned long func_addr = 0; + unsigned long func_size; struct klp_func_list *pcheck = NULL; for (obj = patch->objs; obj->funcs; obj++) { for (func = obj->funcs; func->old_name; func++) { + unsigned long old_func = (unsigned long)func->old_func; + if (enable) { + bool need_check_old = false; + if (func->patched || func->force == KLP_ENFORCEMENT) continue; /* @@ -153,7 +158,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * No patched on this function * [ the origin one ] */ - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { /* @@ -184,6 +189,13 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, func->force); if (ret) return ret; + need_check_old = (func_addr != old_func); + } + if (need_check_old) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, func->force); + if (ret) + return ret; } } else { /* @@ -203,7 +215,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * the stack. */ if (list_is_singular(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { struct klp_func *prev; @@ -219,6 +231,12 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, 0); if (ret) return ret; + if (func_addr != old_func) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, 0); + if (ret) + return ret; + } #endif func_addr = (unsigned long)func->new_func; func_size = func->new_size; diff --git a/arch/arm64/kernel/livepatch.c b/arch/arm64/kernel/livepatch.c index 6b5bcb491125..5b0171254820 100644 --- a/arch/arm64/kernel/livepatch.c +++ b/arch/arm64/kernel/livepatch.c @@ -126,13 +126,18 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, int ret; struct klp_object *obj; struct klp_func *func; - unsigned long func_addr, func_size; + unsigned long func_addr = 0; + unsigned long func_size; struct klp_func_node *func_node; struct klp_func_list *pcheck = NULL; for (obj = patch->objs; obj->funcs; obj++) { for (func = obj->funcs; func->old_name; func++) { + unsigned long old_func = (unsigned long)func->old_func; + if (enable) { + bool need_check_old = false; + if (func->patched || func->force == KLP_ENFORCEMENT) continue; /* @@ -142,7 +147,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func_node = klp_find_func_node(func->old_func); if (!func_node || list_empty(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { /* @@ -173,6 +178,13 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, func->force); if (ret) return ret; + need_check_old = (func_addr != old_func); + } + if (need_check_old) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, func->force); + if (ret) + return ret; } } else { /* @@ -193,7 +205,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * the stack. */ if (list_is_singular(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { struct klp_func *prev; @@ -209,6 +221,12 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, 0); if (ret) return ret; + if (func_addr != old_func) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, 0); + if (ret) + return ret; + } #endif func_addr = (unsigned long)func->new_func; diff --git a/arch/powerpc/kernel/livepatch_32.c b/arch/powerpc/kernel/livepatch_32.c index 7b4ed23bf2ca..3fe4f3c5790b 100644 --- a/arch/powerpc/kernel/livepatch_32.c +++ b/arch/powerpc/kernel/livepatch_32.c @@ -123,13 +123,18 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, int ret; struct klp_object *obj; struct klp_func *func; - unsigned long func_addr, func_size; + unsigned long func_addr = 0; + unsigned long func_size; struct klp_func_node *func_node; struct klp_func_list *pcheck = NULL; for (obj = patch->objs; obj->funcs; obj++) { for (func = obj->funcs; func->old_name; func++) { + unsigned long old_func = (unsigned long)func->old_func; + if (enable) { + bool need_check_old = false; + if (func->patched || func->force == KLP_ENFORCEMENT) continue; /* @@ -143,7 +148,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * No patched on this function * [ the origin one ] */ - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { /* @@ -174,6 +179,13 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, func->force); if (ret) return ret; + need_check_old = (func_addr != old_func); + } + if (need_check_old) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, func->force); + if (ret) + return ret; } } else { /* @@ -193,7 +205,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * the stack. */ if (list_is_singular(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { struct klp_func *prev; @@ -208,6 +220,12 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func_size, func->old_name, 0); if (ret) return ret; + if (func_addr != old_func) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, 0); + if (ret) + return ret; + } #endif func_addr = (unsigned long)func->new_func; func_size = func->new_size; diff --git a/arch/x86/kernel/livepatch.c b/arch/x86/kernel/livepatch.c index 0241e560bd2e..43404fc1fdbb 100644 --- a/arch/x86/kernel/livepatch.c +++ b/arch/x86/kernel/livepatch.c @@ -120,16 +120,20 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, int ret; struct klp_object *obj; struct klp_func *func; - unsigned long func_addr, func_size; + unsigned long func_addr = 0; + unsigned long func_size; struct klp_func_node *func_node = NULL; struct klp_func_list *pcheck = NULL; for (obj = patch->objs; obj->funcs; obj++) { for (func = obj->funcs; func->old_name; func++) { - func_node = klp_find_func_node(func->old_func); + unsigned long old_func = (unsigned long)func->old_func; + func_node = klp_find_func_node(func->old_func); /* Check func address in stack */ if (enable) { + bool need_check_old = false; + if (func->patched || func->force == KLP_ENFORCEMENT) continue; /* @@ -138,7 +142,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, */ if (!func_node || list_empty(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { /* @@ -169,6 +173,13 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func->old_name, func->force); if (ret) return ret; + need_check_old = (func_addr != old_func); + } + if (need_check_old) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, func->force); + if (ret) + return ret; } } else { /* @@ -186,7 +197,7 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, * the stack. */ if (list_is_singular(&func_node->func_stack)) { - func_addr = (unsigned long)func->old_func; + func_addr = old_func; func_size = func->old_size; } else { struct klp_func *prev; @@ -201,6 +212,12 @@ static int klp_check_activeness_func(struct klp_patch *patch, int enable, func_size, func->old_name, 0); if (ret) return ret; + if (func_addr != old_func) { + ret = add_func_to_list(check_funcs, &pcheck, old_func, + func->old_size, func->old_name, 0); + if (ret) + return ret; + } #endif func_addr = (unsigned long)func->new_func; -- 2.25.1

2 1

[PATCH openEuler-23.09] mm: gmem: Use find_vma_intersection to find overlap vma
by Wupeng Ma 18 Sep '23

18 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7WLVX --------------------------------------------- Use find_vma_intersection instead of find_vma to find overlapping vma. Fixes: 848492f233ce ("mm: gmem: Introduce vm_object for gmem") Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> --- mm/mmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/mmap.c b/mm/mmap.c index eb24efdba25d..2aef07b8a85e 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -2701,7 +2701,7 @@ int do_vmi_munmap(struct vma_iterator *vmi, struct mm_struct *mm, struct vm_area_struct *vma; if (gmem_is_enabled()) { - vma = find_vma(mm, start); + vma = find_vma_intersection(mm, start, start + len); if (!vma) return 0; if (vma_is_peer_shared(vma)) { -- 2.25.1

2 1

[PATCH openEuler-23.09] ima: fix the PGP certificate failure to load into the kernel
by Zhou Shuiqing 15 Sep '23

15 Sep '23

euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I81RYU CVE: NA ------------------------------------------------- This patch is to fix the PGP certificate failure to load into the kernel, PGP certificates are used to verify the IMA digest list. Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> --- certs/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/certs/Makefile b/certs/Makefile index ab6da6f4e..49f8101cc 100644 --- a/certs/Makefile +++ b/certs/Makefile @@ -67,7 +67,7 @@ $(obj)/system_certificates.o: $(obj)/signing_key.x509 ifdef CONFIG_PGP_PRELOAD_PUBLIC_KEYS ifeq ($(shell ls $(srctree)/certs/pubring.gpg 2> /dev/null), $(srctree)/certs/pubring.gpg) -system_certificates.o += -DHAVE_PUBRING_GPG +AFLAGS_system_certificates.o += -DHAVE_PUBRING_GPG $(obj)/system_certificates.o: $(srctree)/certs/pubring.gpg endif endif -- 2.33.0

2 1

[PATCH openEuler-23.09] ima: fix the PGP certificate failure to load into the kernel
by Zhou Shuiqing 15 Sep '23

15 Sep '23

euleros inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I81RYU CVE: NA ------------------------------------------------- This patch is to fix the PGP certificate failure to load into the kernel, PGP certificates are used to verify the IMA digest list. Signed-off-by: Zhou Shuiqing <zhoushuiqing2(a)huawei.com> --- certs/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/certs/Makefile b/certs/Makefile index ab6da6f4e..49f8101cc 100644 --- a/certs/Makefile +++ b/certs/Makefile @@ -67,7 +67,7 @@ $(obj)/system_certificates.o: $(obj)/signing_key.x509 ifdef CONFIG_PGP_PRELOAD_PUBLIC_KEYS ifeq ($(shell ls $(srctree)/certs/pubring.gpg 2> /dev/null), $(srctree)/certs/pubring.gpg) -system_certificates.o += -DHAVE_PUBRING_GPG +AFLAGS_system_certificates.o += -DHAVE_PUBRING_GPG $(obj)/system_certificates.o: $(srctree)/certs/pubring.gpg endif endif -- 2.33.0

2 1

[PATCH openEuler-1.0-LTS] sched/qos: Fix warning in CPU hotplug scenarios
by Xia Fukun 15 Sep '23

15 Sep '23

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7ZMCB CVE: NA -------------------------------- CPU hotplug callbacks race against distribute_cfs_runtime(), when the QOS_SCHED feature is enabled, there may be situations where the cfs_rq-> runtime_remaining == 1 and cfs_rq is QOS_THROTTLED. Turn off the Qos_throttle when the CPU is offline. No longer allocate time to cfs_rq in this scenario to fix the warning. Fixes: fbea24f5894e ("sched/qos: Don't unthrottle cfs_rq when cfs_rq is throttled by qos") Signed-off-by: Xia Fukun <xiafukun(a)huawei.com> --- kernel/sched/fair.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index e9afb1e6ca4c..1c78e2f29901 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4783,6 +4783,19 @@ static u64 distribute_cfs_runtime(struct cfs_bandwidth *cfs_b, u64 remaining) if (!cfs_rq_throttled(cfs_rq)) goto next; + /* + * CPU hotplug callbacks race against distribute_cfs_runtime() + * when the QOS_SCHED feature is enabled, there may be + * situations where the runtime_remaining > 0. + * Qos_sched does not care whether the cfs_rq has time left, + * so no longer allocate time to cfs_rq in this scenario. + */ +#ifdef CONFIG_QOS_SCHED + if (cfs_rq->throttled == QOS_THROTTLED && + cfs_rq->runtime_remaining > 0) + goto next; +#endif + /* By the above check, this should never be true */ SCHED_WARN_ON(cfs_rq->runtime_remaining > 0); @@ -7754,6 +7767,10 @@ static bool check_qos_cfs_rq(struct cfs_rq *cfs_rq) if (unlikely(cfs_rq && cfs_rq->tg->qos_level < 0 && !sched_idle_cpu(smp_processor_id()) && cfs_rq->h_nr_running == cfs_rq->idle_h_nr_running)) { + + if (!rq_of(cfs_rq)->online) + return false; + throttle_qos_cfs_rq(cfs_rq); return true; } -- 2.34.1

2 1

[PATCH OLK-5.10] ata: libahci: clear pending interrupt status
by Xingui Yang 15 Sep '23

15 Sep '23

From: Szuying Chen <chensiying21(a)gmail.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I81M63 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git/commit/?… ------------------------------------------------------------ When a CRC error occurs, the HBA asserts an interrupt to indicate an interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then does error recovery. If the adapter receives another SDB FIS with an error (PxIS.TFES) from the device before the start of the EH recovery process, the interrupt signaling the new SDB cannot be serviced as PxIE was cleared already. This in turn results in the HBA inability to issue any command during the error recovery process after setting PxCMD.ST to 1 because PxIS.TFES is still set. According to AHCI 1.3.1 specifications section 6.2.2, fatal errors notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will cause the HBA to enter the ERR:Fatal state. In this state, the HBA shall not issue any new commands. To avoid this situation, introduce the function ahci_port_clear_pending_irq() to clear pending interrupts before executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2 specification. Signed-off-by: Szuying Chen <Chloe_Chen(a)asmedia.com.tw> Fixes: e0bfd149973d ("[PATCH] ahci: stop engine during hard reset") Cc: stable(a)vger.kernel.org Reviewed-by: Niklas Cassel <niklas.cassel(a)wdc.com> Signed-off-by: Damien Le Moal <dlemoal(a)kernel.org> Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> --- drivers/ata/libahci.c | 35 +++++++++++++++++++++++------------ 1 file changed, 23 insertions(+), 12 deletions(-) diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index 4514f3f28..160400a2a 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1205,6 +1205,26 @@ static ssize_t ahci_activity_show(struct ata_device *dev, char *buf) return sprintf(buf, "%d\n", emp->blink_policy); } +static void ahci_port_clear_pending_irq(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + void __iomem *port_mmio = ahci_port_base(ap); + u32 tmp; + + /* clear SError */ + tmp = readl(port_mmio + PORT_SCR_ERR); + dev_dbg(ap->host->dev, "PORT_SCR_ERR 0x%x\n", tmp); + writel(tmp, port_mmio + PORT_SCR_ERR); + + /* clear port IRQ */ + tmp = readl(port_mmio + PORT_IRQ_STAT); + dev_dbg(ap->host->dev, "PORT_IRQ_STAT 0x%x\n", tmp); + if (tmp) + writel(tmp, port_mmio + PORT_IRQ_STAT); + + writel(1 << ap->port_no, hpriv->mmio + HOST_IRQ_STAT); +} + static void ahci_port_init(struct device *dev, struct ata_port *ap, int port_no, void __iomem *mmio, void __iomem *port_mmio) @@ -1219,18 +1239,7 @@ static void ahci_port_init(struct device *dev, struct ata_port *ap, if (rc) dev_warn(dev, "%s (%d)\n", emsg, rc); - /* clear SError */ - tmp = readl(port_mmio + PORT_SCR_ERR); - VPRINTK("PORT_SCR_ERR 0x%x\n", tmp); - writel(tmp, port_mmio + PORT_SCR_ERR); - - /* clear port IRQ */ - tmp = readl(port_mmio + PORT_IRQ_STAT); - VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp); - if (tmp) - writel(tmp, port_mmio + PORT_IRQ_STAT); - - writel(1 << port_no, mmio + HOST_IRQ_STAT); + ahci_port_clear_pending_irq(ap); /* mark esata ports */ tmp = readl(port_mmio + PORT_CMD); @@ -1560,6 +1569,8 @@ int ahci_do_hardreset(struct ata_link *link, unsigned int *class, tf.command = ATA_BUSY; ata_tf_to_fis(&tf, 0, 0, d2h_fis); + ahci_port_clear_pending_irq(ap); + rc = sata_link_hardreset(link, timing, deadline, online, ahci_check_ready); -- 2.17.1

2 1

[PATCH OLK-5.10] net: sched: sch_qfq: Fix UAF in qfq_dequeue()
by Liu Jian 15 Sep '23

15 Sep '23

From: valis <sec(a)valis.email> mainline inclusion from mainline-v6.6-rc1 commit 8fc134fee27f2263988ae38920bc03da416b03d8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I80USB CVE: CVE-2023-4921 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- When the plug qdisc is used as a class of the qfq qdisc it could trigger a UAF. This issue can be reproduced with following commands: tc qdisc add dev lo root handle 1: qfq tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512 tc qdisc add dev lo parent 1:1 handle 2: plug tc filter add dev lo parent 1: basic classid 1:1 ping -c1 127.0.0.1 and boom: [ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0 [ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144 [ 285.355903] [ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4 [ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 285.358376] Call Trace: [ 285.358773] <IRQ> [ 285.359109] dump_stack_lvl+0x44/0x60 [ 285.359708] print_address_description.constprop.0+0x2c/0x3c0 [ 285.360611] kasan_report+0x10c/0x120 [ 285.361195] ? qfq_dequeue+0xa7/0x7f0 [ 285.361780] qfq_dequeue+0xa7/0x7f0 [ 285.362342] __qdisc_run+0xf1/0x970 [ 285.362903] net_tx_action+0x28e/0x460 [ 285.363502] __do_softirq+0x11b/0x3de [ 285.364097] do_softirq.part.0+0x72/0x90 [ 285.364721] </IRQ> [ 285.365072] <TASK> [ 285.365422] __local_bh_enable_ip+0x77/0x90 [ 285.366079] __dev_queue_xmit+0x95f/0x1550 [ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10 [ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10 [ 285.368259] ? __build_skb_around+0x129/0x190 [ 285.368960] ? ip_generic_getfrag+0x12c/0x170 [ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 285.370390] ? csum_partial+0x8/0x20 [ 285.370961] ? raw_getfrag+0xe5/0x140 [ 285.371559] ip_finish_output2+0x539/0xa40 [ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10 [ 285.372954] ip_output+0x113/0x1e0 [ 285.373512] ? __pfx_ip_output+0x10/0x10 [ 285.374130] ? icmp_out_count+0x49/0x60 [ 285.374739] ? __pfx_ip_finish_output+0x10/0x10 [ 285.375457] ip_push_pending_frames+0xf3/0x100 [ 285.376173] raw_sendmsg+0xef5/0x12d0 [ 285.376760] ? do_syscall_64+0x40/0x90 [ 285.377359] ? __static_call_text_end+0x136578/0x136578 [ 285.378173] ? do_syscall_64+0x40/0x90 [ 285.378772] ? kasan_enable_current+0x11/0x20 [ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10 [ 285.380137] ? __sock_create+0x13e/0x270 [ 285.380673] ? __sys_socket+0xf3/0x180 [ 285.381174] ? __x64_sys_socket+0x3d/0x50 [ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.382425] ? __rcu_read_unlock+0x48/0x70 [ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380 [ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 285.384295] ? preempt_count_sub+0x14/0xc0 [ 285.384844] ? __list_del_entry_valid+0x76/0x140 [ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0 [ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10 [ 285.386645] ? release_sock+0xa0/0xd0 [ 285.387148] ? preempt_count_sub+0x14/0xc0 [ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0 [ 285.388341] ? aa_sk_perm+0x177/0x390 [ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10 [ 285.389441] ? check_stack_object+0x22/0x70 [ 285.390032] ? inet_send_prepare+0x2f/0x120 [ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10 [ 285.391172] sock_sendmsg+0xcc/0xe0 [ 285.391667] __sys_sendto+0x190/0x230 [ 285.392168] ? __pfx___sys_sendto+0x10/0x10 [ 285.392727] ? kvm_clock_get_cycles+0x14/0x30 [ 285.393328] ? set_normalized_timespec64+0x57/0x70 [ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40 [ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160 [ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10 [ 285.395908] ? _copy_to_user+0x3e/0x60 [ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.397734] ? do_syscall_64+0x71/0x90 [ 285.398258] __x64_sys_sendto+0x74/0x90 [ 285.398786] do_syscall_64+0x64/0x90 [ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.400605] ? do_syscall_64+0x71/0x90 [ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.401807] RIP: 0033:0x495726 [ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09 [ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726 [ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000 [ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c [ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634 [ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000 [ 285.410403] </TASK> [ 285.410704] [ 285.410929] Allocated by task 144: [ 285.411402] kasan_save_stack+0x1e/0x40 [ 285.411926] kasan_set_track+0x21/0x30 [ 285.412442] __kasan_slab_alloc+0x55/0x70 [ 285.412973] kmem_cache_alloc_node+0x187/0x3d0 [ 285.413567] __alloc_skb+0x1b4/0x230 [ 285.414060] __ip_append_data+0x17f7/0x1b60 [ 285.414633] ip_append_data+0x97/0xf0 [ 285.415144] raw_sendmsg+0x5a8/0x12d0 [ 285.415640] sock_sendmsg+0xcc/0xe0 [ 285.416117] __sys_sendto+0x190/0x230 [ 285.416626] __x64_sys_sendto+0x74/0x90 [ 285.417145] do_syscall_64+0x64/0x90 [ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.418306] [ 285.418531] Freed by task 144: [ 285.418960] kasan_save_stack+0x1e/0x40 [ 285.419469] kasan_set_track+0x21/0x30 [ 285.419988] kasan_save_free_info+0x27/0x40 [ 285.420556] ____kasan_slab_free+0x109/0x1a0 [ 285.421146] kmem_cache_free+0x1c2/0x450 [ 285.421680] __netif_receive_skb_core+0x2ce/0x1870 [ 285.422333] __netif_receive_skb_one_core+0x97/0x140 [ 285.423003] process_backlog+0x100/0x2f0 [ 285.423537] __napi_poll+0x5c/0x2d0 [ 285.424023] net_rx_action+0x2be/0x560 [ 285.424510] __do_softirq+0x11b/0x3de [ 285.425034] [ 285.425254] The buggy address belongs to the object at ffff8880bad31280 [ 285.425254] which belongs to the cache skbuff_head_cache of size 224 [ 285.426993] The buggy address is located 40 bytes inside of [ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360) [ 285.428572] [ 285.428798] The buggy address belongs to the physical page: [ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31 [ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1) [ 285.431447] page_type: 0xffffffff() [ 285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000 [ 285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 285.433562] page dumped because: kasan: bad access detected [ 285.434144] [ 285.434320] Memory state around the buggy address: [ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 285.436777] ^ [ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.438126] ================================================================== [ 285.438662] Disabling lock debugging due to kernel taint Fix this by: 1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a function compatible with non-work-conserving qdiscs 2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq. Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: valis <sec(a)valis.email> Signed-off-by: valis <sec(a)valis.email> Signed-off-by: Jamal Hadi Salim <jhs(a)mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Liu Jian <liujian56(a)huawei.com> --- net/sched/sch_plug.c | 2 +- net/sched/sch_qfq.c | 22 +++++++++++++++++----- 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/net/sched/sch_plug.c b/net/sched/sch_plug.c index cbc2ebca4548..339990bb5981 100644 --- a/net/sched/sch_plug.c +++ b/net/sched/sch_plug.c @@ -210,7 +210,7 @@ static struct Qdisc_ops plug_qdisc_ops __read_mostly = { .priv_size = sizeof(struct plug_sched_data), .enqueue = plug_enqueue, .dequeue = plug_dequeue, - .peek = qdisc_peek_head, + .peek = qdisc_peek_dequeued, .init = plug_init, .change = plug_change, .reset = qdisc_reset_queue, diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index 1aa9e71a1d76..9447f486141d 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -976,10 +976,13 @@ static void qfq_update_eligible(struct qfq_sched *q) } /* Dequeue head packet of the head class in the DRR queue of the aggregate. */ -static void agg_dequeue(struct qfq_aggregate *agg, - struct qfq_class *cl, unsigned int len) +static struct sk_buff *agg_dequeue(struct qfq_aggregate *agg, + struct qfq_class *cl, unsigned int len) { - qdisc_dequeue_peeked(cl->qdisc); + struct sk_buff *skb = qdisc_dequeue_peeked(cl->qdisc); + + if (!skb) + return NULL; cl->deficit -= (int) len; @@ -989,6 +992,8 @@ static void agg_dequeue(struct qfq_aggregate *agg, cl->deficit += agg->lmax; list_move_tail(&cl->alist, &agg->active); } + + return skb; } static inline struct sk_buff *qfq_peek_skb(struct qfq_aggregate *agg, @@ -1134,11 +1139,18 @@ static struct sk_buff *qfq_dequeue(struct Qdisc *sch) if (!skb) return NULL; - qdisc_qstats_backlog_dec(sch, skb); sch->q.qlen--; + + skb = agg_dequeue(in_serv_agg, cl, len); + + if (!skb) { + sch->q.qlen++; + return NULL; + } + + qdisc_qstats_backlog_dec(sch, skb); qdisc_bstats_update(sch, skb); - agg_dequeue(in_serv_agg, cl, len); /* If lmax is lowered, through qfq_change_class, for a class * owning pending packets with larger size than the new value * of lmax, then the following condition may hold. -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] net: sched: sch_qfq: Fix UAF in qfq_dequeue()
by Liu Jian 15 Sep '23

15 Sep '23

From: valis <sec(a)valis.email> mainline inclusion from mainline-v6.6-rc1 commit 8fc134fee27f2263988ae38920bc03da416b03d8 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I80USB CVE: CVE-2023-4921 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------- When the plug qdisc is used as a class of the qfq qdisc it could trigger a UAF. This issue can be reproduced with following commands: tc qdisc add dev lo root handle 1: qfq tc class add dev lo parent 1: classid 1:1 qfq weight 1 maxpkt 512 tc qdisc add dev lo parent 1:1 handle 2: plug tc filter add dev lo parent 1: basic classid 1:1 ping -c1 127.0.0.1 and boom: [ 285.353793] BUG: KASAN: slab-use-after-free in qfq_dequeue+0xa7/0x7f0 [ 285.354910] Read of size 4 at addr ffff8880bad312a8 by task ping/144 [ 285.355903] [ 285.356165] CPU: 1 PID: 144 Comm: ping Not tainted 6.5.0-rc3+ #4 [ 285.357112] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 285.358376] Call Trace: [ 285.358773] <IRQ> [ 285.359109] dump_stack_lvl+0x44/0x60 [ 285.359708] print_address_description.constprop.0+0x2c/0x3c0 [ 285.360611] kasan_report+0x10c/0x120 [ 285.361195] ? qfq_dequeue+0xa7/0x7f0 [ 285.361780] qfq_dequeue+0xa7/0x7f0 [ 285.362342] __qdisc_run+0xf1/0x970 [ 285.362903] net_tx_action+0x28e/0x460 [ 285.363502] __do_softirq+0x11b/0x3de [ 285.364097] do_softirq.part.0+0x72/0x90 [ 285.364721] </IRQ> [ 285.365072] <TASK> [ 285.365422] __local_bh_enable_ip+0x77/0x90 [ 285.366079] __dev_queue_xmit+0x95f/0x1550 [ 285.366732] ? __pfx_csum_and_copy_from_iter+0x10/0x10 [ 285.367526] ? __pfx___dev_queue_xmit+0x10/0x10 [ 285.368259] ? __build_skb_around+0x129/0x190 [ 285.368960] ? ip_generic_getfrag+0x12c/0x170 [ 285.369653] ? __pfx_ip_generic_getfrag+0x10/0x10 [ 285.370390] ? csum_partial+0x8/0x20 [ 285.370961] ? raw_getfrag+0xe5/0x140 [ 285.371559] ip_finish_output2+0x539/0xa40 [ 285.372222] ? __pfx_ip_finish_output2+0x10/0x10 [ 285.372954] ip_output+0x113/0x1e0 [ 285.373512] ? __pfx_ip_output+0x10/0x10 [ 285.374130] ? icmp_out_count+0x49/0x60 [ 285.374739] ? __pfx_ip_finish_output+0x10/0x10 [ 285.375457] ip_push_pending_frames+0xf3/0x100 [ 285.376173] raw_sendmsg+0xef5/0x12d0 [ 285.376760] ? do_syscall_64+0x40/0x90 [ 285.377359] ? __static_call_text_end+0x136578/0x136578 [ 285.378173] ? do_syscall_64+0x40/0x90 [ 285.378772] ? kasan_enable_current+0x11/0x20 [ 285.379469] ? __pfx_raw_sendmsg+0x10/0x10 [ 285.380137] ? __sock_create+0x13e/0x270 [ 285.380673] ? __sys_socket+0xf3/0x180 [ 285.381174] ? __x64_sys_socket+0x3d/0x50 [ 285.381725] ? entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.382425] ? __rcu_read_unlock+0x48/0x70 [ 285.382975] ? ip4_datagram_release_cb+0xd8/0x380 [ 285.383608] ? __pfx_ip4_datagram_release_cb+0x10/0x10 [ 285.384295] ? preempt_count_sub+0x14/0xc0 [ 285.384844] ? __list_del_entry_valid+0x76/0x140 [ 285.385467] ? _raw_spin_lock_bh+0x87/0xe0 [ 285.386014] ? __pfx__raw_spin_lock_bh+0x10/0x10 [ 285.386645] ? release_sock+0xa0/0xd0 [ 285.387148] ? preempt_count_sub+0x14/0xc0 [ 285.387712] ? freeze_secondary_cpus+0x348/0x3c0 [ 285.388341] ? aa_sk_perm+0x177/0x390 [ 285.388856] ? __pfx_aa_sk_perm+0x10/0x10 [ 285.389441] ? check_stack_object+0x22/0x70 [ 285.390032] ? inet_send_prepare+0x2f/0x120 [ 285.390603] ? __pfx_inet_sendmsg+0x10/0x10 [ 285.391172] sock_sendmsg+0xcc/0xe0 [ 285.391667] __sys_sendto+0x190/0x230 [ 285.392168] ? __pfx___sys_sendto+0x10/0x10 [ 285.392727] ? kvm_clock_get_cycles+0x14/0x30 [ 285.393328] ? set_normalized_timespec64+0x57/0x70 [ 285.393980] ? _raw_spin_unlock_irq+0x1b/0x40 [ 285.394578] ? __x64_sys_clock_gettime+0x11c/0x160 [ 285.395225] ? __pfx___x64_sys_clock_gettime+0x10/0x10 [ 285.395908] ? _copy_to_user+0x3e/0x60 [ 285.396432] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.397086] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.397734] ? do_syscall_64+0x71/0x90 [ 285.398258] __x64_sys_sendto+0x74/0x90 [ 285.398786] do_syscall_64+0x64/0x90 [ 285.399273] ? exit_to_user_mode_prepare+0x1a/0x120 [ 285.399949] ? syscall_exit_to_user_mode+0x22/0x50 [ 285.400605] ? do_syscall_64+0x71/0x90 [ 285.401124] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.401807] RIP: 0033:0x495726 [ 285.402233] Code: ff ff ff f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 11 b8 2c 00 00 00 0f 09 [ 285.404683] RSP: 002b:00007ffcc25fb618 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 285.405677] RAX: ffffffffffffffda RBX: 0000000000000040 RCX: 0000000000495726 [ 285.406628] RDX: 0000000000000040 RSI: 0000000002518750 RDI: 0000000000000000 [ 285.407565] RBP: 00000000005205ef R08: 00000000005f8838 R09: 000000000000001c [ 285.408523] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000002517634 [ 285.409460] R13: 00007ffcc25fb6f0 R14: 0000000000000003 R15: 0000000000000000 [ 285.410403] </TASK> [ 285.410704] [ 285.410929] Allocated by task 144: [ 285.411402] kasan_save_stack+0x1e/0x40 [ 285.411926] kasan_set_track+0x21/0x30 [ 285.412442] __kasan_slab_alloc+0x55/0x70 [ 285.412973] kmem_cache_alloc_node+0x187/0x3d0 [ 285.413567] __alloc_skb+0x1b4/0x230 [ 285.414060] __ip_append_data+0x17f7/0x1b60 [ 285.414633] ip_append_data+0x97/0xf0 [ 285.415144] raw_sendmsg+0x5a8/0x12d0 [ 285.415640] sock_sendmsg+0xcc/0xe0 [ 285.416117] __sys_sendto+0x190/0x230 [ 285.416626] __x64_sys_sendto+0x74/0x90 [ 285.417145] do_syscall_64+0x64/0x90 [ 285.417624] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 285.418306] [ 285.418531] Freed by task 144: [ 285.418960] kasan_save_stack+0x1e/0x40 [ 285.419469] kasan_set_track+0x21/0x30 [ 285.419988] kasan_save_free_info+0x27/0x40 [ 285.420556] ____kasan_slab_free+0x109/0x1a0 [ 285.421146] kmem_cache_free+0x1c2/0x450 [ 285.421680] __netif_receive_skb_core+0x2ce/0x1870 [ 285.422333] __netif_receive_skb_one_core+0x97/0x140 [ 285.423003] process_backlog+0x100/0x2f0 [ 285.423537] __napi_poll+0x5c/0x2d0 [ 285.424023] net_rx_action+0x2be/0x560 [ 285.424510] __do_softirq+0x11b/0x3de [ 285.425034] [ 285.425254] The buggy address belongs to the object at ffff8880bad31280 [ 285.425254] which belongs to the cache skbuff_head_cache of size 224 [ 285.426993] The buggy address is located 40 bytes inside of [ 285.426993] freed 224-byte region [ffff8880bad31280, ffff8880bad31360) [ 285.428572] [ 285.428798] The buggy address belongs to the physical page: [ 285.429540] page:00000000f4b77674 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbad31 [ 285.430758] flags: 0x100000000000200(slab|node=0|zone=1) [ 285.431447] page_type: 0xffffffff() [ 285.431934] raw: 0100000000000200 ffff88810094a8c0 dead000000000122 0000000000000000 [ 285.432757] raw: 0000000000000000 00000000800c000c 00000001ffffffff 0000000000000000 [ 285.433562] page dumped because: kasan: bad access detected [ 285.434144] [ 285.434320] Memory state around the buggy address: [ 285.434828] ffff8880bad31180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.435580] ffff8880bad31200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.436264] >ffff8880bad31280: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 285.436777] ^ [ 285.437106] ffff8880bad31300: fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc [ 285.437616] ffff8880bad31380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 285.438126] ================================================================== [ 285.438662] Disabling lock debugging due to kernel taint Fix this by: 1. Changing sch_plug's .peek handler to qdisc_peek_dequeued(), a function compatible with non-work-conserving qdiscs 2. Checking the return value of qdisc_dequeue_peeked() in sch_qfq. Fixes: 462dbc9101ac ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Reported-by: valis <sec(a)valis.email> Signed-off-by: valis <sec(a)valis.email> Signed-off-by: Jamal Hadi Salim <jhs(a)mojatatu.com> Link: https://lore.kernel.org/r/20230901162237.11525-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Liu Jian <liujian56(a)huawei.com> --- net/sched/sch_plug.c | 2 +- net/sched/sch_qfq.c | 22 +++++++++++++++++----- 2 files changed, 18 insertions(+), 6 deletions(-) diff --git a/net/sched/sch_plug.c b/net/sched/sch_plug.c index 5619d2eb17b6..4ddb4af61d10 100644 --- a/net/sched/sch_plug.c +++ b/net/sched/sch_plug.c @@ -214,7 +214,7 @@ static struct Qdisc_ops plug_qdisc_ops __read_mostly = { .priv_size = sizeof(struct plug_sched_data), .enqueue = plug_enqueue, .dequeue = plug_dequeue, - .peek = qdisc_peek_head, + .peek = qdisc_peek_dequeued, .init = plug_init, .change = plug_change, .reset = qdisc_reset_queue, diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index a08579a5f75e..5b7b149a2b9f 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -989,10 +989,13 @@ static void qfq_update_eligible(struct qfq_sched *q) } /* Dequeue head packet of the head class in the DRR queue of the aggregate. */ -static void agg_dequeue(struct qfq_aggregate *agg, - struct qfq_class *cl, unsigned int len) +static struct sk_buff *agg_dequeue(struct qfq_aggregate *agg, + struct qfq_class *cl, unsigned int len) { - qdisc_dequeue_peeked(cl->qdisc); + struct sk_buff *skb = qdisc_dequeue_peeked(cl->qdisc); + + if (!skb) + return NULL; cl->deficit -= (int) len; @@ -1002,6 +1005,8 @@ static void agg_dequeue(struct qfq_aggregate *agg, cl->deficit += agg->lmax; list_move_tail(&cl->alist, &agg->active); } + + return skb; } static inline struct sk_buff *qfq_peek_skb(struct qfq_aggregate *agg, @@ -1147,11 +1152,18 @@ static struct sk_buff *qfq_dequeue(struct Qdisc *sch) if (!skb) return NULL; - qdisc_qstats_backlog_dec(sch, skb); sch->q.qlen--; + + skb = agg_dequeue(in_serv_agg, cl, len); + + if (!skb) { + sch->q.qlen++; + return NULL; + } + + qdisc_qstats_backlog_dec(sch, skb); qdisc_bstats_update(sch, skb); - agg_dequeue(in_serv_agg, cl, len); /* If lmax is lowered, through qfq_change_class, for a class * owning pending packets with larger size than the new value * of lmax, then the following condition may hold. -- 2.34.1

2 1

[PATCH openEuler-23.09] mm: gmem: Check overflow for prefetch/eagerfree
by Wupeng Ma 15 Sep '23

15 Sep '23

From: Ma Wupeng <mawupeng1(a)huawei.com> euleros inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I7WLVX --------------------------------------------- Add overflow check for gmem prefetch/eagerfree. Fixes: 3e01aec2b2e8 ("mm: gmem: Introduce hmadvise") Signed-off-by: Ma Wupeng <mawupeng1(a)huawei.com> --- mm/gmem.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/mm/gmem.c b/mm/gmem.c index a710869d04a9..90a5b5fda284 100644 --- a/mm/gmem.c +++ b/mm/gmem.c @@ -622,12 +622,25 @@ static int hmadvise_do_prefetch(gm_dev_t *dev, unsigned long addr, size_t size) struct prefetch_data *data; struct vm_area_struct *vma; int res = GM_RET_SUCCESS; + unsigned long old_start; + + /* overflow */ + if (check_add_overflow(addr, size, &end)) + return -EINVAL; + + old_start = end; /* Align addr by rounding outward to make page cover addr. */ - end = round_up(addr + size, page_size); + end = round_up(end, page_size); start = round_down(addr, page_size); size = end - start; + if (!end && old_start) + return -EINVAL; + + if (size == 0) + return 0; + mmap_read_lock(current->mm); vma = find_vma(current->mm, start); if (!vma || start < vma->vm_start || end > vma->vm_end) { @@ -675,19 +688,30 @@ static int hmadvise_do_eagerfree(unsigned long addr, size_t size) .size = page_size, .copy = false, }; + unsigned long old_start; vm_object_t *obj; + /* overflow */ + if (check_add_overflow(addr, size, &end)) + return -EINVAL; + + old_start = addr; + /* Align addr by rounding inward to avoid excessive page release. */ - end = round_down(addr + size, page_size); + end = round_down(end, page_size); start = round_up(addr, page_size); if (start >= end) return ret; + /* Check to see whether len was rounded up from small -ve to zero */ + if (old_start && !start) + return -EINVAL; + mmap_read_lock(current->mm); do { vma = find_vma(current->mm, start); if (!vma || !vma_is_peer_shared(vma)) { - pr_err("gmem: not peer-shared vma, skip dontneed\n"); + pr_info_ratelimited("gmem: not peer-shared vma, skip dontneed\n"); continue; } obj = vma->vm_obj; -- 2.25.1

2 1