- Kernel - mailweb.openeuler.org

[PATCH openEuler-1.0-LTS 1/2] crypto: hisilicon - add CRYPTO_TFM_REQ_MAY_BACKLOG flag judge in sec_process()
by Yang Yingliang 12 Nov '21

12 Nov '21

From: Yu'an Wang <wangyuan46(a)huawei.com> driver inclusion category: Bugfix bugzilla: NA CVE: NA Set the flag CRYPTO_TFM_REQ_MAY_BACKLOG in the crypto driver, which can limit task process Signed-off-by: Yu'an Wang <wangyuan46(a)huawei.com> Reviewed-by: Longfang Liu <liulongfang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/crypto/hisilicon/sec2/sec.h | 1 + drivers/crypto/hisilicon/sec2/sec_crypto.c | 11 ++++++++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/drivers/crypto/hisilicon/sec2/sec.h b/drivers/crypto/hisilicon/sec2/sec.h index f6d1878edcc5c..51b93e25b750b 100644 --- a/drivers/crypto/hisilicon/sec2/sec.h +++ b/drivers/crypto/hisilicon/sec2/sec.h @@ -43,6 +43,7 @@ struct sec_req { int err_type; int req_id; + u32 flag; /* Status of the SEC request */ bool fake_busy; diff --git a/drivers/crypto/hisilicon/sec2/sec_crypto.c b/drivers/crypto/hisilicon/sec2/sec_crypto.c index 68fb0e5ef761d..482aa8d26640e 100644 --- a/drivers/crypto/hisilicon/sec2/sec_crypto.c +++ b/drivers/crypto/hisilicon/sec2/sec_crypto.c @@ -171,10 +171,13 @@ static int sec_bd_send(struct sec_ctx *ctx, struct sec_req *req) struct sec_qp_ctx *qp_ctx = req->qp_ctx; int ret; - mutex_lock(&qp_ctx->req_lock); + if (ctx->fake_req_limit <= + atomic_read(&qp_ctx->qp->qp_status.used) && + !(req->flag & CRYPTO_TFM_REQ_MAY_BACKLOG)) + return -EBUSY; + mutex_lock(&qp_ctx->req_lock); ret = hisi_qp_send(qp_ctx->qp, &req->sec_sqe); - if (ctx->fake_req_limit <= atomic_read(&qp_ctx->qp->qp_status.used) && !ret) { list_add_tail(&req->backlog_head, &qp_ctx->backlog); @@ -917,7 +920,8 @@ static int sec_process(struct sec_ctx *ctx, struct sec_req *req) sec_update_iv(req, ctx->alg_type); ret = ctx->req_op->bd_send(ctx, req); - if (unlikely(ret != -EBUSY && ret != -EINPROGRESS)) { + if (unlikely((ret != -EBUSY && ret != -EINPROGRESS) || + (ret == -EBUSY && !(req->flag & CRYPTO_TFM_REQ_MAY_BACKLOG)))) { dev_err_ratelimited(SEC_CTX_DEV(ctx), "send sec request failed!\n"); goto err_send_req; @@ -1009,6 +1013,7 @@ static int sec_skcipher_crypto(struct skcipher_request *sk_req, bool encrypt) if (!sk_req->cryptlen) return 0; + req->flag = sk_req->base.flags; req->c_req.sk_req = sk_req; req->c_req.encrypt = encrypt; req->ctx = ctx; -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS 1/3] tcp: always set retrans_stamp on recovery
by Yang Yingliang 12 Nov '21

12 Nov '21

From: Yuchung Cheng <ycheng(a)google.com> mainline inclusion from mainline-v5.1-rc1 commit 7ae189759cc48cf8b54beebff566e9fd2d4e7d7c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue CVE: NA ------------------------------------------------------------ Previously TCP socket's retrans_stamp is not set if the retransmission has failed to send. As a result if a socket is experiencing local issues to retransmit packets, determining when to abort a socket is complicated w/o knowning the starting time of the recovery since retrans_stamp may remain zero. This complication causes sub-optimal behavior that TCP may use the latest, instead of the first, retransmission time to compute the elapsed time of a stalling connection due to local issues. Then TCP may disrecard TCP retries settings and keep retrying until it finally succeed: not a good idea when the local host is already strained. The simple fix is to always timestamp the start of a recovery. It's worth noting that retrans_stamp is also used to compare echo timestamp values to detect spurious recovery. This patch does not break that because retrans_stamp is still later than when the original packet was sent. Signed-off-by: Yuchung Cheng <ycheng(a)google.com> Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reviewed-by: Neal Cardwell <ncardwell(a)google.com> Reviewed-by: Soheil Hassas Yeganeh <soheil(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Conflicts: net/ipv4/tcp_timer.c Signed-off-by: Jiazhenyuan <jiazhenyuan@uniontech> #openEuler_contributor Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> Reviewed-by: Wei Yongjun <weiyongjun1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/ipv4/tcp_output.c | 9 ++++----- net/ipv4/tcp_timer.c | 23 +++-------------------- 2 files changed, 7 insertions(+), 25 deletions(-) diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 97b9d671a83c9..6710056fd1b23 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -3011,13 +3011,12 @@ int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb, int segs) #endif TCP_SKB_CB(skb)->sacked |= TCPCB_RETRANS; tp->retrans_out += tcp_skb_pcount(skb); - - /* Save stamp of the first retransmit. */ - if (!tp->retrans_stamp) - tp->retrans_stamp = tcp_skb_timestamp(skb); - } + /* Save stamp of the first (attempted) retransmit. */ + if (!tp->retrans_stamp) + tp->retrans_stamp = tcp_skb_timestamp(skb); + if (tp->undo_retrans < 0) tp->undo_retrans = 0; tp->undo_retrans += tcp_skb_pcount(skb); diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 681882a409686..8435cbad337d8 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -22,27 +22,13 @@ #include <linux/gfp.h> #include <net/tcp.h> -static u32 tcp_retransmit_stamp(const struct sock *sk) -{ - u32 start_ts = tcp_sk(sk)->retrans_stamp; - - if (unlikely(!start_ts)) { - struct sk_buff *head = tcp_rtx_queue_head(sk); - - if (!head) - return 0; - start_ts = tcp_skb_timestamp(head); - } - return start_ts; -} - static u32 tcp_clamp_rto_to_user_timeout(const struct sock *sk) { struct inet_connection_sock *icsk = inet_csk(sk); u32 elapsed, start_ts; - start_ts = tcp_retransmit_stamp(sk); - if (!icsk->icsk_user_timeout || !start_ts) + start_ts = tcp_sk(sk)->retrans_stamp; + if (!icsk->icsk_user_timeout) return icsk->icsk_rto; elapsed = tcp_time_stamp(tcp_sk(sk)) - start_ts; if (elapsed >= icsk->icsk_user_timeout) @@ -196,10 +182,7 @@ static bool retransmits_timed_out(struct sock *sk, if (!inet_csk(sk)->icsk_retransmits) return false; - start_ts = tcp_retransmit_stamp(sk); - if (!start_ts) - return false; - + start_ts = tcp_sk(sk)->retrans_stamp; if (likely(timeout == 0)) { linear_backoff_thresh = ilog2(TCP_RTO_MAX/rto_base); -- 2.25.1

1 2

[PATCH openEuler-1.0-LTS 01/49] perf/x86/intel/pt: Fix mask of num_address_ranges
by Yang Yingliang 12 Nov '21

12 Nov '21

From: Xiaoyao Li <xiaoyao.li(a)intel.com> stable inclusion from linux-4.19.207 commit f109e8a1678ce920b7f0df7865f2a31754ec5d1c -------------------------------- [ Upstream commit c53c6b7409f4cd9e542991b53d597fbe2751d7db ] Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of configurable address ranges for filtering, not bit 1:0. Signed-off-by: Xiaoyao Li <xiaoyao.li(a)intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Link: https://lkml.kernel.org/r/20210824040622.4081502-1-xiaoyao.li@intel.com Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/events/intel/pt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c index db969f3f175cb..774fb0f0bf6df 100644 --- a/arch/x86/events/intel/pt.c +++ b/arch/x86/events/intel/pt.c @@ -69,7 +69,7 @@ static struct pt_cap_desc { PT_CAP(topa_multiple_entries, 0, CPUID_ECX, BIT(1)), PT_CAP(single_range_output, 0, CPUID_ECX, BIT(2)), PT_CAP(payloads_lip, 0, CPUID_ECX, BIT(31)), - PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x3), + PT_CAP(num_address_ranges, 1, CPUID_EAX, 0x7), PT_CAP(mtc_periods, 1, CPUID_EAX, 0xffff0000), PT_CAP(cycle_thresholds, 1, CPUID_EBX, 0xffff), PT_CAP(psb_periods, 1, CPUID_EBX, 0xffff0000), -- 2.25.1

1 48

[PATCH openEuler-1.0-LTS 1/9] Revert "EMMC: fix ascend hisi emmc probe failed problem according to mmc_host struct"
by Yang Yingliang 12 Nov '21

12 Nov '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: bugfix feature: Ascend emmc adaption bugzilla: https://gitee.com/openeuler/kernel/issues/I4F4LL CVE: NA -------------------- This reverts commit 80e65cb9c78f00090a95e6db3126e3e60ec2804d. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Weilong Chen <chenweilong(a)huawei.com> Reviewed-by: YANHONG LU <luyanhong.luyanhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/core/sd.c | 38 +++++++++++++++++++++++++++++--- drivers/mmc/host/dw_mmc_extern.h | 2 +- include/linux/mmc/host.h | 2 +- 3 files changed, 37 insertions(+), 5 deletions(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 8760b749292b8..20ca371b9f874 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1163,9 +1163,9 @@ static int _mmc_sd_suspend(struct mmc_host *host) err = mmc_deselect_cards(host); if (!err) { - if (!mmc_is_ascend_customized(host->parent)) + if (!(mmc_is_ascend_customized(host->parent))) mmc_power_off(host); - else if (!mmc_card_keep_power(host)) + else if (mmc_card_keep_power(host)) mmc_power_off(host); mmc_card_set_suspended(host->card); } @@ -1269,10 +1269,42 @@ static int mmc_sd_runtime_resume(struct mmc_host *host) return 0; } +#ifdef CONFIG_ASCEND_HISI_MMC +/*********************sd ops begin**********************/ +static int mmc_do_sd_reset(struct mmc_host *host) +{ + struct mmc_card *card = host->card; + + if (!host->bus_ops->power_restore) + return -EOPNOTSUPP; + + if (!card) + return -EINVAL; + + /* hw_reset for ip reset */ + if (host->ops->hw_reset) + host->ops->hw_reset(host); + + /* Only for K930/920 SD slow down clk*/ + if (host->ops->slowdown_clk) + host->ops->slowdown_clk(host, host->ios.timing); + + mmc_power_off(host); + mmc_set_clock(host, host->f_init); + /* Wait at least 200 ms */ + mmc_delay(200); + mmc_power_up(host, host->card->ocr); + (void)mmc_select_voltage(host, host->card->ocr); + + return host->bus_ops->power_restore(host); +} +#endif static int mmc_sd_hw_reset(struct mmc_host *host) { +#ifdef CONFIG_ASCEND_HISI_MMC if (mmc_is_ascend_customized(host->parent)) - return mmc_sd_reset(host); + return mmc_do_sd_reset(host); +#endif mmc_power_cycle(host, host->card->ocr); return mmc_sd_init_card(host, host->card->ocr, host->card); } diff --git a/drivers/mmc/host/dw_mmc_extern.h b/drivers/mmc/host/dw_mmc_extern.h index ab077b4955940..04d8c23f39e9a 100644 --- a/drivers/mmc/host/dw_mmc_extern.h +++ b/drivers/mmc/host/dw_mmc_extern.h @@ -8,7 +8,7 @@ #include "dw_mmc.h" -#if defined(CONFIG_MMC_DW_HI3XXX) || defined(CONFIG_MMC_DW_HI3XXX_MODULE) +#ifdef CONFIG_MMC_DW_HI3XXX_MODULE extern void dw_mci_reg_dump(struct dw_mci *host); extern void dw_mci_set_timeout(struct dw_mci *host); extern bool dw_mci_stop_abort_cmd(struct mmc_command *cmd); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index fabc23d156242..78b4d0a813b71 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -542,13 +542,13 @@ struct mmc_host { bool cqe_enabled; bool cqe_on; + unsigned long private[0] ____cacheline_aligned; #ifdef CONFIG_ASCEND_HISI_MMC const struct mmc_cmdq_host_ops *cmdq_ops; int sdio_present; unsigned int cmdq_slots; struct mmc_cmdq_context_info cmdq_ctx; #endif - unsigned long private[0] ____cacheline_aligned; }; struct device_node; -- 2.25.1

1 8

[PATCH openEuler-1.0-LTS] iommu: support phytium ft2000plus and S2500 iommu function
by Yang Yingliang 11 Nov '21

11 Nov '21

From: Mao HongBo <maohongbo(a)phytium.com.cn> phytium inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I41AUQ ----------------------------------- To fix iommu issue of device access in virtualization scenario for ft2000plus and S2500. Convert to new cputype macros naming of phytium. Signed-off-by: Mao HongBo <maohongbo(a)phytium.com.cn> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/include/asm/cputype.h | 14 +++++-- .../arm64/include/asm/phytium_machine_types.h | 37 +++++++++++++++++++ arch/arm64/kernel/topology.c | 2 +- drivers/iommu/arm-smmu.c | 29 +++++++++++++-- drivers/irqchip/irq-gic-v3-its.c | 9 +++++ drivers/pci/quirks.c | 4 ++ drivers/usb/host/xhci-pci.c | 2 +- 7 files changed, 87 insertions(+), 10 deletions(-) create mode 100644 arch/arm64/include/asm/phytium_machine_types.h diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h index 23298b0aedaf7..aa38796121300 100644 --- a/arch/arm64/include/asm/cputype.h +++ b/arch/arm64/include/asm/cputype.h @@ -101,8 +101,11 @@ #define HISI_CPU_PART_TSV110 0xD01 #define HISI_CPU_PART_TSV200 0xD02 -#define PHYTIUM_CPU_PART_FTC662 0x662 -#define PHYTIUM_CPU_PART_FTC663 0x663 +#define PHYTIUM_CPU_PART_1500A 0X660 +#define PHYTIUM_CPU_PART_2000AHK 0X661 +#define PHYTIUM_CPU_PART_2000PLUS 0X662 +#define PHYTIUM_CPU_PART_2004 0X663 +#define PHYTIUM_CPU_PART_2500 0X663 #define MIDR_CORTEX_A53 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53) #define MIDR_CORTEX_A57 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57) @@ -124,8 +127,11 @@ #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL) #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110) #define MIDR_HISI_TSV200 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV200) -#define MIDR_PHYTIUM_FT2000PLUS MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_FTC662) -#define MIDR_PHYTIUM_FT2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_FTC663) +#define MIDR_FT_1500A MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_1500A) +#define MIDR_FT_2000AHK MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000AHK) +#define MIDR_FT_2000PLUS MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2000PLUS) +#define MIDR_FT_2004 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2004) +#define MIDR_FT_2500 MIDR_CPU_MODEL(ARM_CPU_IMP_PHYTIUM, PHYTIUM_CPU_PART_2500) #ifndef __ASSEMBLY__ diff --git a/arch/arm64/include/asm/phytium_machine_types.h b/arch/arm64/include/asm/phytium_machine_types.h new file mode 100644 index 0000000000000..fb791988f0cee --- /dev/null +++ b/arch/arm64/include/asm/phytium_machine_types.h @@ -0,0 +1,37 @@ +/* + * Authors: Wang Yinfeng <wangyinfenng(a)phytium.com.cn> + * + * Copyright (C) 2021, PHYTIUM Information Technology Co., Ltd. + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; either + * version 2 of the License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef __PHYTIUM_MACHINE_TYPES_H__ +#define __PHYTIUM_MACHINE_TYPES_H__ + +#include <asm/cputype.h> +#include <linux/types.h> + +static inline bool phytium_part(u32 cpuid) +{ + return ((read_cpuid_id() & MIDR_CPU_MODEL_MASK) == cpuid); +} + +#define typeof_ft1500a() phytium_part(MIDR_FT_1500A) +#define typeof_ft2000ahk() phytium_part(MIDR_FT_2000AHK) +#define typeof_ft2000plus() phytium_part(MIDR_FT_2000PLUS) +#define typeof_ft2004() phytium_part(MIDR_FT_2004) +#define typeof_s2500() phytium_part(MIDR_FT_2500) + +#endif diff --git a/arch/arm64/kernel/topology.c b/arch/arm64/kernel/topology.c index 02d3e688d657d..2646695e2f2a4 100644 --- a/arch/arm64/kernel/topology.c +++ b/arch/arm64/kernel/topology.c @@ -291,7 +291,7 @@ void store_cpu_topology(unsigned int cpuid) cpuid_topo->package_id = cpu_to_node(cpuid); /* Some PHYTIUM FT2000PLUS platform firmware has no PPTT table */ - if ((read_cpuid_id() & MIDR_CPU_MODEL_MASK) == MIDR_PHYTIUM_FT2000PLUS + if ((read_cpuid_id() & MIDR_CPU_MODEL_MASK) == MIDR_FT_2000PLUS && cpu_to_node(cpuid) == NUMA_NO_NODE) { cpuid_topo->thread_id = 0; cpuid_topo->package_id = 0; diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c index 8a268ab82ef02..18863198bb036 100644 --- a/drivers/iommu/arm-smmu.c +++ b/drivers/iommu/arm-smmu.c @@ -56,6 +56,10 @@ #include "arm-smmu-regs.h" +#ifdef CONFIG_ARCH_PHYTIUM +#include <asm/phytium_machine_types.h> +#endif + /* * Apparently, some Qualcomm arm64 platforms which appear to expose their SMMU * global register space are still, in fact, using a hypervisor to mediate it @@ -1407,6 +1411,20 @@ static int arm_smmu_add_device(struct device *dev) return -ENODEV; } +#ifdef CONFIG_ARCH_PHYTIUM + /* ft2000+ */ + if (typeof_ft2000plus()) { + int num = fwspec->num_ids; + + for (i = 0; i < num; i++) { +#define FWID_READ(id) (((u16)(id) >> 3) | (((id) >> SMR_MASK_SHIFT | 0x7000) << SMR_MASK_SHIFT)) + u32 fwid = FWID_READ(fwspec->ids[i]); + + iommu_fwspec_add_ids(dev, &fwid, 1); + } + } +#endif + ret = -EINVAL; for (i = 0; i < fwspec->num_ids; i++) { u16 sid = fwspec->ids[i]; @@ -1481,6 +1499,12 @@ static struct iommu_group *arm_smmu_device_group(struct device *dev) if (group && smmu->s2crs[idx].group && group != smmu->s2crs[idx].group) return ERR_PTR(-EINVAL); +#ifdef CONFIG_ARCH_PHYTIUM + if (typeof_s2500()) + break; + if (typeof_ft2000plus() && !smmu->s2crs[idx].group) + continue; +#endif group = smmu->s2crs[idx].group; } @@ -1614,10 +1638,7 @@ static void arm_smmu_put_resv_regions(struct device *dev, #include <asm/cputype.h> static int phytium_smmu_def_domain_type(struct device *dev, unsigned int *type) { - u32 midr = read_cpuid_id(); - - if (((midr & MIDR_CPU_MODEL_MASK) == MIDR_PHYTIUM_FT2000PLUS) - || ((midr & MIDR_CPU_MODEL_MASK) == MIDR_PHYTIUM_FT2500)) { + if (typeof_ft2000plus() || typeof_s2500()) { *type = IOMMU_DOMAIN_IDENTITY; return 0; } diff --git a/drivers/irqchip/irq-gic-v3-its.c b/drivers/irqchip/irq-gic-v3-its.c index 1a2ecfa23fd8c..79648a2139412 100644 --- a/drivers/irqchip/irq-gic-v3-its.c +++ b/drivers/irqchip/irq-gic-v3-its.c @@ -51,6 +51,10 @@ #include "irq-gic-common.h" +#ifdef CONFIG_ARCH_PHYTIUM +#include <asm/phytium_machine_types.h> +#endif + #define ITS_FLAGS_CMDQ_NEEDS_FLUSHING (1ULL << 0) #define ITS_FLAGS_WORKAROUND_CAVIUM_22375 (1ULL << 1) #define ITS_FLAGS_WORKAROUND_CAVIUM_23144 (1ULL << 2) @@ -1223,6 +1227,11 @@ static void its_irq_compose_msi_msg(struct irq_data *d, struct msi_msg *msg) msg->address_hi = upper_32_bits(addr); msg->data = its_get_event_id(d); +#ifdef CONFIG_ARCH_PHYTIUM + if (typeof_ft2000plus()) + return; +#endif + iommu_dma_map_msi_msg(d->irq, msg); } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 961003c6dc807..99657b9bc82e0 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4646,6 +4646,10 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs }, /* Zhaoxin Root/Downstream Ports */ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs }, + /* because PLX switch Vendor id is 0x10b5 on phytium cpu */ + { 0x10b5, PCI_ANY_ID, pci_quirk_xgene_acs }, + /* because rootcomplex Vendor id is 0x17cd on phytium cpu */ + { 0x17cd, PCI_ANY_ID, pci_quirk_xgene_acs }, { 0 } }; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 886cd6fc4b640..238a32cc311c9 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -313,7 +313,7 @@ static void phytium_xhci_pci_workaround(struct pci_dev *dev) u32 midr = read_cpuid_id(); /* Firmware bug, DMA mask is not reported by the firmware */ - if ((midr & MIDR_CPU_MODEL_MASK) == MIDR_PHYTIUM_FT2000PLUS) + if ((midr & MIDR_CPU_MODEL_MASK) == MIDR_FT_2000PLUS) dma_set_mask(&dev->dev, DMA_BIT_MASK(64)); } #else -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] arm64: Errata: fix kabi changed by cpu_errata and enable idc
by Yang Yingliang 11 Nov '21

11 Nov '21

From: Weilong Chen <chenweilong(a)huawei.com> ascend inclusion category: feature bugzilla: 46922 CVE: NA ------------------------------------- Patch "cache: Workaround HiSilicon Taishan DC CVAU" breaks the kabi symbols: cpu_hwcaps cpu_hwcap_keys Patch "arm64: Errata: fix kabi changed by cpu_errata" try to fix it but incomplete. Eable IDC on platform TSV{110,200}. Signed-off-by: Weilong Chen <chenweilong(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/kernel/cpufeature.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c index 822e6a2c0af1d..1bf9d84265de2 100644 --- a/arch/arm64/kernel/cpufeature.c +++ b/arch/arm64/kernel/cpufeature.c @@ -912,6 +912,19 @@ static bool has_cache_idc(const struct arm64_cpu_capabilities *entry, { u64 ctr; +#ifndef CONFIG_HISILICON_ERRATUM_1980005 + /* Fix kABI compatible for CONFIG_HISILICON_ERRATUM_1980005 */ + static const struct midr_range idc_support_list[] = { + MIDR_ALL_VERSIONS(MIDR_HISI_TSV110), + MIDR_REV(MIDR_HISI_TSV200, 1, 0), + { /* sentinel */ } + }; + if (is_midr_in_range_list(read_cpuid_id(), idc_support_list)) { + pr_info("CPU features: detected: Taishan IDC coherence workaround\n"); + return true; + } +#endif + if (scope == SCOPE_SYSTEM) ctr = arm64_ftr_reg_ctrel0.sys_val; else -- 2.25.1

1 0

[PATCH openEuler-5.10 01/59] psi: support psi under cgroup v1
by Zheng Zengkai 11 Nov '21

11 Nov '21

From: Xunlei Pang <xlpang(a)linux.alibaba.com> Export "cpu|io|memory.pressure" to cgroup v1 "cpuacct" subsystem. hulk inclusion category: feature bugzilla: 182979 https://gitee.com/openeuler/kernel/issues/I4HOX6 ------------------------------------------ Reviewed-by: Joseph Qi <joseph.qi(a)linux.alibaba.com> Signed-off-by: Xunlei Pang <xlpang(a)linux.alibaba.com> Signed-off-by: Chen Wandun <chenwandun(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- init/Kconfig | 10 ++++++++++ kernel/cgroup/cgroup.c | 28 ++++++++++++++++++++++++++++ kernel/sched/cpuacct.c | 10 ++++++++++ kernel/sched/psi.c | 4 ++++ kernel/sched/sched.h | 4 ++++ 5 files changed, 56 insertions(+) diff --git a/init/Kconfig b/init/Kconfig index 04bc46ca0b9e..0afdb08131eb 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -635,6 +635,16 @@ config PSI_DEFAULT_DISABLED Say N if unsure. +config PSI_CGROUP_V1 + bool "Support PSI under cgroup v1" + default Y + depends on PSI + help + If set, pressure stall information tracking will be used + for cgroup v1 other than v2. + + Say N if unsure. + endmenu # "CPU/Task time and stats accounting" config CPU_ISOLATION diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 701ef7ba4f95..86ab4a1305f6 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -3659,6 +3659,34 @@ static void cgroup_pressure_release(struct kernfs_open_file *of) { psi_trigger_replace(&of->priv, NULL); } + +struct cftype cgroup_v1_psi_files[] = { + { + .name = "io.pressure", + .flags = CFTYPE_NO_PREFIX, + .seq_show = cgroup_io_pressure_show, + .write = cgroup_io_pressure_write, + .poll = cgroup_pressure_poll, + .release = cgroup_pressure_release, + }, + { + .name = "memory.pressure", + .flags = CFTYPE_NO_PREFIX, + .seq_show = cgroup_memory_pressure_show, + .write = cgroup_memory_pressure_write, + .poll = cgroup_pressure_poll, + .release = cgroup_pressure_release, + }, + { + .name = "cpu.pressure", + .flags = CFTYPE_NO_PREFIX, + .seq_show = cgroup_cpu_pressure_show, + .write = cgroup_cpu_pressure_write, + .poll = cgroup_pressure_poll, + .release = cgroup_pressure_release, + }, + { } /* terminate */ +}; #endif /* CONFIG_PSI */ static int cgroup_freeze_show(struct seq_file *seq, void *v) diff --git a/kernel/sched/cpuacct.c b/kernel/sched/cpuacct.c index 941c28cf9738..4e5488659339 100644 --- a/kernel/sched/cpuacct.c +++ b/kernel/sched/cpuacct.c @@ -374,3 +374,13 @@ struct cgroup_subsys cpuacct_cgrp_subsys = { .legacy_cftypes = files, .early_init = true, }; + +#ifdef CONFIG_PSI +static int __init cgroup_v1_psi_init(void) +{ + cgroup_add_legacy_cftypes(&cpuacct_cgrp_subsys, cgroup_v1_psi_files); + return 0; +} + +late_initcall_sync(cgroup_v1_psi_init); +#endif diff --git a/kernel/sched/psi.c b/kernel/sched/psi.c index d50a31ecedee..0b48a74cbfac 100644 --- a/kernel/sched/psi.c +++ b/kernel/sched/psi.c @@ -752,7 +752,11 @@ static struct psi_group *iterate_groups(struct task_struct *task, void **iter) struct cgroup *cgroup = NULL; if (!*iter) +#ifdef CONFIG_PSI_CGROUP_V1 + cgroup = task_cgroup(task, cpuacct_cgrp_id); +#else cgroup = task->cgroups->dfl_cgrp; +#endif else if (*iter == &psi_system) return NULL; else diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index 4ce573eeca4c..e29f051f824f 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -2585,6 +2585,10 @@ unsigned long scale_irq_capacity(unsigned long util, unsigned long irq, unsigned } #endif +#ifdef CONFIG_PSI +extern struct cftype cgroup_v1_psi_files[]; +#endif + #if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) #define perf_domain_span(pd) (to_cpumask(((pd)->em_pd->cpus))) -- 2.20.1

1 58

[PATCH openEuler-1.0-LTS] blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
by Yang Yingliang 10 Nov '21

10 Nov '21

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v5.16 commit a846a8e6c9a5949582c5a6a8bbc83a7d27fd891e category: bugfix bugzilla: 185668 CVE: NA ----------------------------------------------- We got UAF report on v5.10 as follows: [ 1446.674930] ================================================================== [ 1446.675970] BUG: KASAN: use-after-free in blk_mq_get_driver_tag+0x9a4/0xa90 [ 1446.676902] Read of size 8 at addr ffff8880185afd10 by task kworker/1:2/12348 [ 1446.677851] [ 1446.678073] CPU: 1 PID: 12348 Comm: kworker/1:2 Not tainted 5.10.0-10177-gc9c81b1e346a #2 [ 1446.679168] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1446.680692] Workqueue: kthrotld blk_throtl_dispatch_work_fn [ 1446.681448] Call Trace: [ 1446.681800] dump_stack+0x9b/0xce [ 1446.682916] print_address_description.constprop.6+0x3e/0x60 [ 1446.685999] kasan_report.cold.9+0x22/0x3a [ 1446.687186] blk_mq_get_driver_tag+0x9a4/0xa90 [ 1446.687785] blk_mq_dispatch_rq_list+0x21a/0x1d40 [ 1446.692576] __blk_mq_do_dispatch_sched+0x394/0x830 [ 1446.695758] __blk_mq_sched_dispatch_requests+0x398/0x4f0 [ 1446.698279] blk_mq_sched_dispatch_requests+0xdf/0x140 [ 1446.698967] __blk_mq_run_hw_queue+0xc0/0x270 [ 1446.699561] __blk_mq_delay_run_hw_queue+0x4cc/0x550 [ 1446.701407] blk_mq_run_hw_queue+0x13b/0x2b0 [ 1446.702593] blk_mq_sched_insert_requests+0x1de/0x390 [ 1446.703309] blk_mq_flush_plug_list+0x4b4/0x760 [ 1446.705408] blk_flush_plug_list+0x2c5/0x480 [ 1446.708471] blk_finish_plug+0x55/0xa0 [ 1446.708980] blk_throtl_dispatch_work_fn+0x23b/0x2e0 [ 1446.711236] process_one_work+0x6d4/0xfe0 [ 1446.711778] worker_thread+0x91/0xc80 [ 1446.713400] kthread+0x32d/0x3f0 [ 1446.714362] ret_from_fork+0x1f/0x30 [ 1446.714846] [ 1446.715062] Allocated by task 1: [ 1446.715509] kasan_save_stack+0x19/0x40 [ 1446.716026] __kasan_kmalloc.constprop.1+0xc1/0xd0 [ 1446.716673] blk_mq_init_tags+0x6d/0x330 [ 1446.717207] blk_mq_alloc_rq_map+0x50/0x1c0 [ 1446.717769] __blk_mq_alloc_map_and_request+0xe5/0x320 [ 1446.718459] blk_mq_alloc_tag_set+0x679/0xdc0 [ 1446.719050] scsi_add_host_with_dma.cold.3+0xa0/0x5db [ 1446.719736] virtscsi_probe+0x7bf/0xbd0 [ 1446.720265] virtio_dev_probe+0x402/0x6c0 [ 1446.720808] really_probe+0x276/0xde0 [ 1446.721320] driver_probe_device+0x267/0x3d0 [ 1446.721892] device_driver_attach+0xfe/0x140 [ 1446.722491] __driver_attach+0x13a/0x2c0 [ 1446.723037] bus_for_each_dev+0x146/0x1c0 [ 1446.723603] bus_add_driver+0x3fc/0x680 [ 1446.724145] driver_register+0x1c0/0x400 [ 1446.724693] init+0xa2/0xe8 [ 1446.725091] do_one_initcall+0x9e/0x310 [ 1446.725626] kernel_init_freeable+0xc56/0xcb9 [ 1446.726231] kernel_init+0x11/0x198 [ 1446.726714] ret_from_fork+0x1f/0x30 [ 1446.727212] [ 1446.727433] Freed by task 26992: [ 1446.727882] kasan_save_stack+0x19/0x40 [ 1446.728420] kasan_set_track+0x1c/0x30 [ 1446.728943] kasan_set_free_info+0x1b/0x30 [ 1446.729517] __kasan_slab_free+0x111/0x160 [ 1446.730084] kfree+0xb8/0x520 [ 1446.730507] blk_mq_free_map_and_requests+0x10b/0x1b0 [ 1446.731206] blk_mq_realloc_hw_ctxs+0x8cb/0x15b0 [ 1446.731844] blk_mq_init_allocated_queue+0x374/0x1380 [ 1446.732540] blk_mq_init_queue_data+0x7f/0xd0 [ 1446.733155] scsi_mq_alloc_queue+0x45/0x170 [ 1446.733730] scsi_alloc_sdev+0x73c/0xb20 [ 1446.734281] scsi_probe_and_add_lun+0x9a6/0x2d90 [ 1446.734916] __scsi_scan_target+0x208/0xc50 [ 1446.735500] scsi_scan_channel.part.3+0x113/0x170 [ 1446.736149] scsi_scan_host_selected+0x25a/0x360 [ 1446.736783] store_scan+0x290/0x2d0 [ 1446.737275] dev_attr_store+0x55/0x80 [ 1446.737782] sysfs_kf_write+0x132/0x190 [ 1446.738313] kernfs_fop_write_iter+0x319/0x4b0 [ 1446.738921] new_sync_write+0x40e/0x5c0 [ 1446.739429] vfs_write+0x519/0x720 [ 1446.739877] ksys_write+0xf8/0x1f0 [ 1446.740332] do_syscall_64+0x2d/0x40 [ 1446.740802] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 1446.741462] [ 1446.741670] The buggy address belongs to the object at ffff8880185afd00 [ 1446.741670] which belongs to the cache kmalloc-256 of size 256 [ 1446.743276] The buggy address is located 16 bytes inside of [ 1446.743276] 256-byte region [ffff8880185afd00, ffff8880185afe00) [ 1446.744765] The buggy address belongs to the page: [ 1446.745416] page:ffffea0000616b00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x185ac [ 1446.746694] head:ffffea0000616b00 order:2 compound_mapcount:0 compound_pincount:0 [ 1446.747719] flags: 0x1fffff80010200(slab|head) [ 1446.748337] raw: 001fffff80010200 ffffea00006a3208 ffffea000061bf08 ffff88801004f240 [ 1446.749404] raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 [ 1446.750455] page dumped because: kasan: bad access detected [ 1446.751227] [ 1446.751445] Memory state around the buggy address: [ 1446.752102] ffff8880185afc00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.753090] ffff8880185afc80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.754079] >ffff8880185afd00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1446.755065] ^ [ 1446.755589] ffff8880185afd80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1446.756574] ffff8880185afe00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1446.757566] ================================================================== Flag 'BLK_MQ_F_TAG_QUEUE_SHARED' will be set if the second device on the same host initializes it's queue successfully. However, if the second device failed to allocate memory in blk_mq_alloc_and_init_hctx() from blk_mq_realloc_hw_ctxs() from blk_mq_init_allocated_queue(), __blk_mq_free_map_and_rqs() will be called on error path, and if 'BLK_MQ_TAG_HCTX_SHARED' is not set, 'tag_set->tags' will be freed while it's still used by the first device. To fix this issue we move release newly allocated hardware context from blk_mq_realloc_hw_ctxs to __blk_mq_update_nr_hw_queues. As there is needn't to release hardware context in blk_mq_init_allocated_queue. Fixes: 868f2f0b7206 ("blk-mq: dynamic h/w context count") Signed-off-by: Ye Bin <yebin10(a)huawei.com> Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Link: https://lore.kernel.org/r/20211108074019.1058843-1-yebin10@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflicts: block/blk-mq.c Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-mq.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/block/blk-mq.c b/block/blk-mq.c index 55c81dcafbdc2..ef62a83314a5d 100644 --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2804,8 +2804,6 @@ static void blk_mq_realloc_hw_ctxs(struct blk_mq_tag_set *set, struct blk_mq_hw_ctx *hctx = hctxs[j]; if (hctx) { - if (hctx->tags) - blk_mq_free_map_and_requests(set, j); blk_mq_exit_hctx(q, set, hctx, j); hctxs[j] = NULL; } @@ -3236,8 +3234,13 @@ static void __blk_mq_update_nr_hw_queues(struct blk_mq_tag_set *set, list_for_each_entry(q, &set->tag_list, tag_set_list) { blk_mq_realloc_hw_ctxs(set, q); if (q->nr_hw_queues != set->nr_hw_queues) { + int i = prev_nr_hw_queues; + pr_warn("Increasing nr_hw_queues to %d fails, fallback to %d\n", nr_hw_queues, prev_nr_hw_queues); + for (; i < set->nr_hw_queues; i++) + blk_mq_free_map_and_requests(set, i); + set->nr_hw_queues = prev_nr_hw_queues; blk_mq_map_queues(set); goto fallback; -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/2] nbd: add a flush_workqueue in nbd_start_device
by Yang Yingliang 10 Nov '21

10 Nov '21

From: Sun Ke <sunke32(a)huawei.com> mainline inclusion from mainline-v5.6-rc1 commit 5c0dd228b5fc30a3b732c7ae2657e0161ec7ed80 category: bugfix bugzilla: 185690 CVE: NA ----------------------------------------------- When kzalloc fail, may cause trying to destroy the workqueue from inside the workqueue. If num_connections is m (2 < m), and NO.1 ~ NO.n (1 < n < m) kzalloc are successful. The NO.(n + 1) failed. Then, nbd_start_device will return ENOMEM to nbd_start_device_ioctl, and nbd_start_device_ioctl will return immediately without running flush_workqueue. However, we still have n recv threads. If nbd_release run first, recv threads may have to drop the last config_refs and try to destroy the workqueue from inside the workqueue. To fix it, add a flush_workqueue in nbd_start_device. Fixes: e9e006f5fcf2 ("nbd: fix max number of supported devs") Signed-off-by: Sun Ke <sunke32(a)huawei.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/nbd.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 33a52be762d24..775cbb4c1bbcd 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1306,6 +1306,16 @@ static int nbd_start_device(struct nbd_device *nbd) args = kzalloc(sizeof(*args), GFP_KERNEL); if (!args) { sock_shutdown(nbd); + /* + * If num_connections is m (2 < m), + * and NO.1 ~ NO.n(1 < n < m) kzallocs are successful. + * But NO.(n + 1) failed. We still have n recv threads. + * So, add flush_workqueue here to prevent recv threads + * dropping the last config_refs and trying to destroy + * the workqueue from inside the workqueue. + */ + if (i) + flush_workqueue(nbd->recv_workq); return -ENOMEM; } sk_set_memalloc(config->socks[i]->sock->sk); -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS 1/2] bpf, cgroup: Assign cgroup in cgroup_sk_alloc when called from interrupt
by Yang Yingliang 10 Nov '21

10 Nov '21

From: Daniel Borkmann <daniel(a)iogearbox.net> mainline inclusion from mainline-v5.15-rc4 commit 78cc316e9583067884eb8bd154301dc1e9ee945c category: bugfix bugzilla: 184472 CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224f547 due to commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: syzbot+df709157a4ecaf192b03(a)syzkaller.appspotmail.com Reported-by: syzbot+533f389d4026d86a2a95(a)syzkaller.appspotmail.com Signed-off-by: Daniel Borkmann <daniel(a)iogearbox.net> Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Tested-by: syzbot+df709157a4ecaf192b03(a)syzkaller.appspotmail.com Tested-by: syzbot+533f389d4026d86a2a95(a)syzkaller.appspotmail.com Acked-by: Tejun Heo <tj(a)kernel.org> Link: https://lore.kernel.org/bpf/20210927123921.21535-1-daniel@iogearbox.net Conflicts: kernel/cgroup/cgroup.c Signed-off-by: Lu Jialin <lujialin4(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/cgroup/cgroup.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/kernel/cgroup/cgroup.c b/kernel/cgroup/cgroup.c index 682c5e231bddc..7897f1ab77266 100644 --- a/kernel/cgroup/cgroup.c +++ b/kernel/cgroup/cgroup.c @@ -5935,8 +5935,11 @@ void cgroup_sk_alloc(struct sock_cgroup_data *skcd) } /* Don't associate the sock with unrelated interrupted task's cgroup. */ - if (in_interrupt()) + if (in_interrupt()) { + cgroup_get(&cgrp_dfl_root.cgrp); + skcd->val = (unsigned long)&cgrp_dfl_root.cgrp; return; + } rcu_read_lock(); -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS 1/7] sctp: use init_tag from inithdr for ABORT chunk
by Yang Yingliang 10 Nov '21

10 Nov '21

From: Xin Long <lucien.xin(a)gmail.com> mainline inclusion from mainline-v5.15 commit 4f7019c7eb33967eb87766e0e4602b5576873680 category: bugfix bugzilla: NA CVE: CVE-2021-3772 ------------------------------------------------- Currently Linux SCTP uses the verification tag of the existing SCTP asoc when failing to process and sending the packet with the ABORT chunk. This will result in the peer accepting the ABORT chunk and removing the SCTP asoc. One could exploit this to terminate a SCTP asoc. This patch is to fix it by always using the initiate tag of the received INIT chunk for the ABORT chunk to be sent. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin(a)gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner(a)gmail.com> Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Huang Guobin <huangguobin4(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/sctp/sm_statefuns.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 19bd14a4eb07e..9ae0676afd5d4 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -6261,6 +6261,7 @@ static struct sctp_packet *sctp_ootb_pkt_new( * yet. */ switch (chunk->chunk_hdr->type) { + case SCTP_CID_INIT: case SCTP_CID_INIT_ACK: { struct sctp_initack_chunk *initack; -- 2.25.1

1 6

[PATCH kernel-4.19] fix the problem that the pointer may be double free
by zhangyue 10 Nov '21

10 Nov '21

mainline inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4AH11?from=project-issue CVE: NA int driver/md/md.c, if the function autorun_array() is called, first called do_md_run() and then do_md_stop(), this time, the pointer mddev->private may be double free Signed-off-by: zhangyue <zhangyue1(a)kylinos.cn> --- drivers/md/md.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 4406bb137a27..aa204ec74066 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -6000,8 +6000,10 @@ static void __md_stop(struct mddev *mddev) spin_lock(&mddev->lock); mddev->pers = NULL; spin_unlock(&mddev->lock); - pers->free(mddev, mddev->private); - mddev->private = NULL; + if (mddev->private) { + pers->free(mddev, mddev->private); + mddev->private = NULL; + } if (pers->sync_request && mddev->to_remove == NULL) mddev->to_remove = &md_redundancy_group; module_put(pers->owner); -- 2.30.0

1 0

[PATCH kernel-4.19] bios_parser.c: fix uninitialized variable in device_type_from_device_id
by shenzijun 10 Nov '21

10 Nov '21

From: 沈子俊 <shenzijun(a)kylinos.cn> kylin inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4AH6U?from=project-issue CVE: NA ----------------------------------------------------------------------------- add uninitialization of result_device_id.raw_device_tag Signed-off-by: 沈子俊 <shenzijun(a)kylinos.cn> --- drivers/gpu/drm/amd/display/dc/bios/bios_parser.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c b/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c index be8a2494355a..9375757fb640 100644 --- a/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c +++ b/drivers/gpu/drm/amd/display/dc/bios/bios_parser.c @@ -2450,6 +2450,7 @@ static struct device_id device_type_from_device_id(uint16_t device_id) { struct device_id result_device_id; + result_device_id.raw_device_tag = 0; switch (device_id) { case ATOM_DEVICE_LCD1_SUPPORT: -- 2.30.0

1 0

Re: [PATCH openEuler-1.0-LTS 0/6] Fix the problem that the number of tcp timeout retransmissions is lost
by QiuLaibin 09 Nov '21

09 Nov '21

hi zhenyuan: 针对你先前提交的“Fix the problem that the number of tcp timeout retransmissions is lost”补丁集，我们在内部review的时候committer给了如下检视意见切换EDT主线有 tcp 和 fq 的几个patchset和bugfix, 这里建议先合入解决本问题后边的3个patch。因此是否只合后三个patch就可以满足能够解决你目前遇到的问题。 best regard On 2021/10/22 18:52, Jiazhenyuan wrote: > > > > From: Jiazhenyuan <jiazhenyuan(a)uniontech.com> > > issue: https://gitee.com/openeuler/kernel/issues/I4AFRJ?from=project-issue > > jiazhenyuan (6): > tcp: switch tcp and sch_fq to new earliest departure time > net_sched: sch_fq: ensure maxrate fq parameter applies to EDT flows > From 9efdda4e3abed13f0903b7b6e4d4c2102019440a Mon Sep 17 00:00:00 2001 > From: Eric Dumazet <edumazet(a)google.com> Date: Sat, 24 Nov 2018 > 09:12:24 -0800 Subject: [PATCH] tcp: address problems caused by EDT > misshaps > From 7ae189759cc48cf8b54beebff566e9fd2d4e7d7c Mon Sep 17 00:00:00 2001 > From: Yuchung Cheng <ycheng(a)google.com> Date: Wed, 16 Jan 2019 > 15:05:30 -0800 Subject: [PATCH] tcp: always set retrans_stamp on > recovery > From 01a523b071618abbc634d1958229fe3bd2dfa5fa Mon Sep 17 00:00:00 2001 > From: Yuchung Cheng <ycheng(a)google.com> Date: Wed, 16 Jan 2019 > 15:05:32 -0800 Subject: [PATCH] tcp: create a helper to model > exponential backoff > From 3256a2d6ab1f71f9a1bd2d7f6f18eb8108c48d17 Mon Sep 17 00:00:00 2001 > From: Eric Dumazet <edumazet(a)google.com> Date: Mon, 30 Sep 2019 > 15:44:44 -0700 Subject: [PATCH] tcp: adjust rto_base in > retransmits_timed_out() > > net/ipv4/tcp_bbr.c | 7 +++-- > net/ipv4/tcp_input.c | 17 +++++++----- > net/ipv4/tcp_output.c | 29 ++++++++++++++------ > net/ipv4/tcp_timer.c | 64 ++++++++++++++++++++----------------------- > net/sched/sch_fq.c | 46 ++++++++++++++++++------------- > 5 files changed, 92 insertions(+), 71 deletions(-) > > -- > 2.27.0 > _______________________________________________ Kernel mailing list -- kernel(a)openeuler.org To unsubscribe send an email to kernel-leave(a)openeuler.org

2 1

(无主题)
by 汪越越 09 Nov '21

09 Nov '21

。

1 0

[PATCH openEuler-1.0-LTS 01/18] drivers/perf: arm_spe: Don't error on high-order pages for aux buf
by Yang Yingliang 09 Nov '21

09 Nov '21

From: Will Deacon <will.deacon(a)arm.com> mainline inclusion from mainline-v5.1-rc3 commit 14ae42a6f0b13130a97d94d23481128961de5d38 category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4A1XO CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… ------------------------------------------------------------------------ Since commit 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically"), the perf core tends to back aux buffer allocations with high-order pages with the order encoded in the PagePrivate data. The Arm SPE driver explicitly rejects such pages, causing the perf tool to fail with: | failed to mmap with 12 (Cannot allocate memory) In actual fact, we can simply treat these pages just like any other since the perf core takes care to populate the page array appropriately. In theory we could try to map with PMDs where possible, but for now, let's just get things working again. Cc: Alexander Shishkin <alexander.shishkin(a)linux.intel.com> Fixes: 5768402fd9c6 ("perf/ring_buffer: Use high order allocations for AUX buffers optimistically") Reported-by: Hanjun Guo <guohanjun(a)huawei.com> Tested-by: Hanjun Guo <guohanjun(a)huawei.com> Tested-by: Sudeep Holla <sudeep.holla(a)arm.com> Signed-off-by: Will Deacon <will.deacon(a)arm.com> Signed-off-by: Qi Liu <liuqi115(a)huawei.com> Reviewed-by: Yang Jihong <yangjihong1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/perf/arm_spe_pmu.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-) diff --git a/drivers/perf/arm_spe_pmu.c b/drivers/perf/arm_spe_pmu.c index a11951b083307..4fb65c61c8eab 100644 --- a/drivers/perf/arm_spe_pmu.c +++ b/drivers/perf/arm_spe_pmu.c @@ -856,16 +856,8 @@ static void *arm_spe_pmu_setup_aux(struct perf_event *event, void **pages, if (!pglist) goto out_free_buf; - for (i = 0; i < nr_pages; ++i) { - struct page *page = virt_to_page(pages[i]); - - if (PagePrivate(page)) { - pr_warn("unexpected high-order page for auxbuf!"); - goto out_free_pglist; - } - + for (i = 0; i < nr_pages; ++i) pglist[i] = virt_to_page(pages[i]); - } buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL); if (!buf->base) -- 2.25.1

1 17

[PATCH openEuler-1.0-LTS 1/2] drm/hisilicon: Support i2c driver algorithms for bit-shift adapters
by Yang Yingliang 09 Nov '21

09 Nov '21

From: Tian Tao <tiantao6(a)hisilicon.com> mainline inclusion from mainline-v5.14.0-rc7 commit 4eb4d99dfe3018d86f4529112aa7082f43b6996a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I469VQ CVE: NA Remove #include <drm/drm_probe_helper.h> in hibmc_drm_i2c.c. ----------------------------- Adding driver implementation to support i2c driver algorithms for bit-shift adapters, so hibmc will using the interface provided by drm to read edid. Signed-off-by: Tian Tao <tiantao6(a)hisilicon.com> Reviewed-by: Thomas Zimmermann <tzimmermann(a)suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1600778670-60370-2-git-send-e… Signed-off-by: gouhao <gouhao(a)uniontech.com> Reviewed-by: tian tao <tiantao6(a)hisilicon.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/hisilicon/hibmc/Makefile | 3 +- .../gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h | 25 +++++ .../gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c | 98 +++++++++++++++++++ 3 files changed, 125 insertions(+), 1 deletion(-) create mode 100644 drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c diff --git a/drivers/gpu/drm/hisilicon/hibmc/Makefile b/drivers/gpu/drm/hisilicon/hibmc/Makefile index 3df726696372f..71c248f4c7562 100644 --- a/drivers/gpu/drm/hisilicon/hibmc/Makefile +++ b/drivers/gpu/drm/hisilicon/hibmc/Makefile @@ -1,3 +1,4 @@ -hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o hibmc_drm_fbdev.o hibmc_ttm.o +hibmc-drm-y := hibmc_drm_drv.o hibmc_drm_de.o hibmc_drm_vdac.o \ + hibmc_drm_fbdev.o hibmc_ttm.o hibmc_drm_i2c.o obj-$(CONFIG_DRM_HISI_HIBMC) += hibmc-drm.o diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h index 4395dc6674bbc..c246151b29942 100644 --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_drv.h @@ -19,12 +19,18 @@ #ifndef HIBMC_DRM_DRV_H #define HIBMC_DRM_DRV_H +#include <linux/gpio/consumer.h> +#include <linux/i2c-algo-bit.h> +#include <linux/i2c.h> + +#include <drm/drm_edid.h> #include <drm/drmP.h> #include <drm/drm_atomic.h> #include <drm/drm_fb_helper.h> #include <drm/drm_gem.h> #include <drm/ttm/ttm_bo_driver.h> + struct hibmc_framebuffer { struct drm_framebuffer fb; struct drm_gem_object *obj; @@ -36,6 +42,13 @@ struct hibmc_fbdev { int size; }; +struct hibmc_connector { + struct drm_connector base; + + struct i2c_adapter adapter; + struct i2c_algo_bit_data bit_data; +}; + struct hibmc_drm_private { /* hw */ void __iomem *mmio; @@ -46,6 +59,7 @@ struct hibmc_drm_private { /* drm */ struct drm_device *dev; + struct hibmc_connector connector; bool mode_config_initialized; struct drm_atomic_state *suspend_state; @@ -60,6 +74,16 @@ struct hibmc_drm_private { bool mm_inited; }; +static inline struct hibmc_connector *to_hibmc_connector(struct drm_connector *connector) +{ + return container_of(connector, struct hibmc_connector, base); +} + +static inline struct hibmc_drm_private *to_hibmc_drm_private(struct drm_device *dev) +{ + return dev->dev_private; +} + #define to_hibmc_framebuffer(x) container_of(x, struct hibmc_framebuffer, fb) struct hibmc_bo { @@ -110,6 +134,7 @@ int hibmc_dumb_create(struct drm_file *file, struct drm_device *dev, int hibmc_dumb_mmap_offset(struct drm_file *file, struct drm_device *dev, u32 handle, u64 *offset); int hibmc_mmap(struct file *filp, struct vm_area_struct *vma); +int hibmc_ddc_create(struct drm_device *drm_dev, struct hibmc_connector *connector); extern const struct drm_mode_config_funcs hibmc_mode_funcs; diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c new file mode 100644 index 0000000000000..ffd7c7bf4b7d8 --- /dev/null +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_i2c.c @@ -0,0 +1,98 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* Hisilicon Hibmc SoC drm driver + * + * Based on the bochs drm driver. + * + * Copyright (c) 2016 Huawei Limited. + * + * Author: + * Tian Tao <tiantao6(a)hisilicon.com> + */ + +#include <linux/delay.h> +#include <linux/pci.h> + +#include <drm/drm_atomic_helper.h> + +#include "hibmc_drm_drv.h" + +#define GPIO_DATA 0x0802A0 +#define GPIO_DATA_DIRECTION 0x0802A4 + +#define I2C_SCL_MASK BIT(0) +#define I2C_SDA_MASK BIT(1) + +static void hibmc_set_i2c_signal(void *data, u32 mask, int value) +{ + struct hibmc_connector *hibmc_connector = data; + struct hibmc_drm_private *priv = to_hibmc_drm_private(hibmc_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if (value) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } else { + u32 tmp_data = readl(priv->mmio + GPIO_DATA); + + tmp_data &= ~mask; + writel(tmp_data, priv->mmio + GPIO_DATA); + + tmp_dir |= mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } +} + +static int hibmc_get_i2c_signal(void *data, u32 mask) +{ + struct hibmc_connector *hibmc_connector = data; + struct hibmc_drm_private *priv = to_hibmc_drm_private(hibmc_connector->base.dev); + u32 tmp_dir = readl(priv->mmio + GPIO_DATA_DIRECTION); + + if ((tmp_dir & mask) != mask) { + tmp_dir &= ~mask; + writel(tmp_dir, priv->mmio + GPIO_DATA_DIRECTION); + } + + return (readl(priv->mmio + GPIO_DATA) & mask) ? 1 : 0; +} + +static void hibmc_ddc_setsda(void *data, int state) +{ + hibmc_set_i2c_signal(data, I2C_SDA_MASK, state); +} + +static void hibmc_ddc_setscl(void *data, int state) +{ + hibmc_set_i2c_signal(data, I2C_SCL_MASK, state); +} + +static int hibmc_ddc_getsda(void *data) +{ + return hibmc_get_i2c_signal(data, I2C_SDA_MASK); +} + +static int hibmc_ddc_getscl(void *data) +{ + return hibmc_get_i2c_signal(data, I2C_SCL_MASK); +} + +int hibmc_ddc_create(struct drm_device *drm_dev, + struct hibmc_connector *connector) +{ + connector->adapter.owner = THIS_MODULE; + connector->adapter.class = I2C_CLASS_DDC; + snprintf(connector->adapter.name, I2C_NAME_SIZE, "HIS i2c bit bus"); + connector->adapter.dev.parent = &drm_dev->pdev->dev; + i2c_set_adapdata(&connector->adapter, connector); + connector->adapter.algo_data = &connector->bit_data; + + connector->bit_data.udelay = 20; + connector->bit_data.timeout = usecs_to_jiffies(2000); + connector->bit_data.data = connector; + connector->bit_data.setsda = hibmc_ddc_setsda; + connector->bit_data.setscl = hibmc_ddc_setscl; + connector->bit_data.getsda = hibmc_ddc_getsda; + connector->bit_data.getscl = hibmc_ddc_getscl; + + return i2c_bit_add_bus(&connector->adapter); +} -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS] compiler.h: fix barrier_data() on clang
by Yang Yingliang 09 Nov '21

09 Nov '21

From: Arvind Sankar <nivedita(a)alum.mit.edu> stable inclusion from linux-4.19.164 commit b207caff4176e3a6ba273243da2db2e595e4aad2 CVE: CVE-2021-0938 -------------------------------- commit 3347acc6fcd4ee71ad18a9ff9d9dac176b517329 upstream. Commit 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") neglected to copy barrier_data() from compiler-gcc.h into compiler-clang.h. The definition in compiler-gcc.h was really to work around clang's more aggressive optimization, so this broke barrier_data() on clang, and consequently memzero_explicit() as well. For example, this results in at least the memzero_explicit() call in lib/crypto/sha256.c:sha256_transform() being optimized away by clang. Fix this by moving the definition of barrier_data() into compiler.h. Also move the gcc/clang definition of barrier() into compiler.h, __memory_barrier() is icc-specific (and barrier() is already defined using it in compiler-intel.h) and doesn't belong in compiler.h. [rdunlap(a)infradead.org: fix ALPHA builds when SMP is not enabled] Link: https://lkml.kernel.org/r/20201101231835.4589-1-rdunlap@infradead.org Fixes: 815f0ddb346c ("include/linux/compiler*.h: make compiler-*.h mutually exclusive") Signed-off-by: Arvind Sankar <nivedita(a)alum.mit.edu> Signed-off-by: Randy Dunlap <rdunlap(a)infradead.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Tested-by: Nick Desaulniers <ndesaulniers(a)google.com> Reviewed-by: Nick Desaulniers <ndesaulniers(a)google.com> Reviewed-by: Kees Cook <keescook(a)chromium.org> Cc: <stable(a)vger.kernel.org> Link: https://lkml.kernel.org/r/20201014212631.207844-1-nivedita@alum.mit.edu Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> [nd: backport to account for missing commit e506ea451254a ("compiler.h: Split {READ,WRITE}_ONCE definitions out into rwonce.h") commit d08b9f0ca6605 ("scs: Add support for Clang's Shadow Call Stack (SCS)") commit a3f8a30f3f00 ("Compiler Attributes: use feature checks instead of version checks")] Signed-off-by: Nick Desaulniers <ndesaulniers(a)google.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- include/linux/compiler-clang.h | 1 - include/linux/compiler-gcc.h | 19 ------------------- include/linux/compiler.h | 18 ++++++++++++++++-- 3 files changed, 16 insertions(+), 22 deletions(-) diff --git a/include/linux/compiler-clang.h b/include/linux/compiler-clang.h index d756f2318efe0..2d6e5e4bb5d93 100644 --- a/include/linux/compiler-clang.h +++ b/include/linux/compiler-clang.h @@ -39,7 +39,6 @@ * and may be redefined here because they should not be shared with other * compilers, like ICC. */ -#define barrier() __asm__ __volatile__("" : : : "memory") #define __must_be_array(a) BUILD_BUG_ON_ZERO(__same_type((a), &(a)[0])) #define __assume_aligned(a, ...) \ __attribute__((__assume_aligned__(a, ## __VA_ARGS__))) diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 3ebee1ce6f982..14be095371093 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -14,25 +14,6 @@ # error Sorry, your compiler is too old - please upgrade it. #endif -/* Optimization barrier */ - -/* The "volatile" is due to gcc bugs */ -#define barrier() __asm__ __volatile__("": : :"memory") -/* - * This version is i.e. to prevent dead stores elimination on @ptr - * where gcc and llvm may behave differently when otherwise using - * normal barrier(): while gcc behavior gets along with a normal - * barrier(), llvm needs an explicit input variable to be assumed - * clobbered. The issue is as follows: while the inline asm might - * access any memory it wants, the compiler could have fit all of - * @ptr into memory registers instead, and since @ptr never escaped - * from that, it proved that the inline asm wasn't touching any of - * it. This version works well with both compilers, i.e. we're telling - * the compiler that the inline asm absolutely may see the contents - * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 - */ -#define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") - /* * This macro obfuscates arithmetic on a variable address so that gcc * shouldn't recognize the original var, and make assumptions about it. diff --git a/include/linux/compiler.h b/include/linux/compiler.h index bb22908c79e83..0e769548e14f8 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -79,11 +79,25 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, /* Optimization barrier */ #ifndef barrier -# define barrier() __memory_barrier() +/* The "volatile" is due to gcc bugs */ +# define barrier() __asm__ __volatile__("": : :"memory") #endif #ifndef barrier_data -# define barrier_data(ptr) barrier() +/* + * This version is i.e. to prevent dead stores elimination on @ptr + * where gcc and llvm may behave differently when otherwise using + * normal barrier(): while gcc behavior gets along with a normal + * barrier(), llvm needs an explicit input variable to be assumed + * clobbered. The issue is as follows: while the inline asm might + * access any memory it wants, the compiler could have fit all of + * @ptr into memory registers instead, and since @ptr never escaped + * from that, it proved that the inline asm wasn't touching any of + * it. This version works well with both compilers, i.e. we're telling + * the compiler that the inline asm absolutely may see the contents + * of @ptr. See also: https://llvm.org/bugs/show_bug.cgi?id=15495 + */ +# define barrier_data(ptr) __asm__ __volatile__("": :"r"(ptr) :"memory") #endif /* workaround for GCC PR82365 if needed */ -- 2.25.1

1 0

[PATCH openEuler-5.10] spfc: Fix compile errors when O=xxx is specified
by Zheng Zengkai 09 Nov '21

09 Nov '21

From: Yanling Song <songyl(a)ramaxel.com> Ramaxel inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4DBD7 CVE: NA ----------------------------------------- Fix two compile errors: 1. Compile failed when O=xxx is specified; 2. Compile conflicted when spfc and spnic are compiled in parallel by -j option because they share some .c files. make O=tmp -j200 > build.log In file included from ../drivers/scsi/spfc/hw/spfc_utils.c:4:0: ../drivers/scsi/spfc/hw/spfc_utils.h:7:10: fatal error: unf_type.h: No such file or directory #include "unf_type.h" ^~~~~~~~~~~~ compilation terminated. make[4]: *** [drivers/scsi/spfc/hw/spfc_utils.o] Error 1 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [drivers/scsi/spfc] Error 2 make[3]: *** Waiting for unfinished jobs.... ../drivers/net/ethernet/ramaxel/spnic/spnic_sriov.c:9:10: fatal error: sphw_common.h: No such file or directory #include "sphw_common.h" ^~~~~~~~~~~~~~~ compilation terminated. Signed-off-by: Yanling Song <songyl(a)ramaxel.com> Reviewed-by: Zhang Lei<zhanglei48(a)huawei.com> [zzk: Adjusted commit message] Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- drivers/net/ethernet/ramaxel/spnic/Makefile | 2 +- drivers/scsi/spfc/Makefile | 30 ++++++++++----------- drivers/scsi/spfc/sphw_api_cmd.c | 1 + drivers/scsi/spfc/sphw_cmdq.c | 1 + drivers/scsi/spfc/sphw_common.c | 1 + drivers/scsi/spfc/sphw_eqs.c | 1 + drivers/scsi/spfc/sphw_hw_cfg.c | 1 + drivers/scsi/spfc/sphw_hw_comm.c | 1 + drivers/scsi/spfc/sphw_hwdev.c | 1 + drivers/scsi/spfc/sphw_hwif.c | 1 + drivers/scsi/spfc/sphw_mbox.c | 1 + drivers/scsi/spfc/sphw_mgmt.c | 1 + drivers/scsi/spfc/sphw_prof_adap.c | 1 + drivers/scsi/spfc/sphw_wq.c | 1 + 14 files changed, 28 insertions(+), 16 deletions(-) create mode 120000 drivers/scsi/spfc/sphw_api_cmd.c create mode 120000 drivers/scsi/spfc/sphw_cmdq.c create mode 120000 drivers/scsi/spfc/sphw_common.c create mode 120000 drivers/scsi/spfc/sphw_eqs.c create mode 120000 drivers/scsi/spfc/sphw_hw_cfg.c create mode 120000 drivers/scsi/spfc/sphw_hw_comm.c create mode 120000 drivers/scsi/spfc/sphw_hwdev.c create mode 120000 drivers/scsi/spfc/sphw_hwif.c create mode 120000 drivers/scsi/spfc/sphw_mbox.c create mode 120000 drivers/scsi/spfc/sphw_mgmt.c create mode 120000 drivers/scsi/spfc/sphw_prof_adap.c create mode 120000 drivers/scsi/spfc/sphw_wq.c diff --git a/drivers/net/ethernet/ramaxel/spnic/Makefile b/drivers/net/ethernet/ramaxel/spnic/Makefile index f86ccff374f6..207e1d9c431a 100644 --- a/drivers/net/ethernet/ramaxel/spnic/Makefile +++ b/drivers/net/ethernet/ramaxel/spnic/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPNIC) += spnic.o -subdir-ccflags-y += -I$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw spnic-objs := hw/sphw_common.o \ hw/sphw_hwif.o \ diff --git a/drivers/scsi/spfc/Makefile b/drivers/scsi/spfc/Makefile index 02fe0213e048..849b730ac733 100644 --- a/drivers/scsi/spfc/Makefile +++ b/drivers/scsi/spfc/Makefile @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPFC) += spfc.o -subdir-ccflags-y += -I$(src)/../../net/ethernet/ramaxel/spnic/hw -subdir-ccflags-y += -I$(src)/hw -subdir-ccflags-y += -I$(src)/common +subdir-ccflags-y += -I$(srctree)/$(src)/../../net/ethernet/ramaxel/spnic/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/common spfc-objs := common/unf_init.o \ common/unf_event.o \ @@ -33,15 +33,15 @@ spfc-objs := common/unf_init.o \ hw/spfc_cqm_bitmap_table.o \ hw/spfc_cqm_main.o \ hw/spfc_cqm_object.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_common.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_wq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.o + sphw_hwdev.o \ + sphw_hw_cfg.o \ + sphw_hw_comm.o \ + sphw_prof_adap.o \ + sphw_common.o \ + sphw_hwif.o \ + sphw_wq.o \ + sphw_cmdq.o \ + sphw_eqs.o \ + sphw_mbox.o \ + sphw_mgmt.o \ + sphw_api_cmd.o diff --git a/drivers/scsi/spfc/sphw_api_cmd.c b/drivers/scsi/spfc/sphw_api_cmd.c new file mode 120000 index 000000000000..27c7c0770fa3 --- /dev/null +++ b/drivers/scsi/spfc/sphw_api_cmd.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_cmdq.c b/drivers/scsi/spfc/sphw_cmdq.c new file mode 120000 index 000000000000..5ac779ba274b --- /dev/null +++ b/drivers/scsi/spfc/sphw_cmdq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_common.c b/drivers/scsi/spfc/sphw_common.c new file mode 120000 index 000000000000..a1a30a4840e1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_common.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_common.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_eqs.c b/drivers/scsi/spfc/sphw_eqs.c new file mode 120000 index 000000000000..74430dcb9dc5 --- /dev/null +++ b/drivers/scsi/spfc/sphw_eqs.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_cfg.c b/drivers/scsi/spfc/sphw_hw_cfg.c new file mode 120000 index 000000000000..4f43d68624c1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_cfg.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_comm.c b/drivers/scsi/spfc/sphw_hw_comm.c new file mode 120000 index 000000000000..c943b3b2933a --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_comm.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwdev.c b/drivers/scsi/spfc/sphw_hwdev.c new file mode 120000 index 000000000000..b7279f17eaa2 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwdev.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwif.c b/drivers/scsi/spfc/sphw_hwif.c new file mode 120000 index 000000000000..d40ef71f9033 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwif.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mbox.c b/drivers/scsi/spfc/sphw_mbox.c new file mode 120000 index 000000000000..1b00fe7289cc --- /dev/null +++ b/drivers/scsi/spfc/sphw_mbox.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mgmt.c b/drivers/scsi/spfc/sphw_mgmt.c new file mode 120000 index 000000000000..fd18a73e9d3a --- /dev/null +++ b/drivers/scsi/spfc/sphw_mgmt.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_prof_adap.c b/drivers/scsi/spfc/sphw_prof_adap.c new file mode 120000 index 000000000000..fbc7db05dd27 --- /dev/null +++ b/drivers/scsi/spfc/sphw_prof_adap.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_wq.c b/drivers/scsi/spfc/sphw_wq.c new file mode 120000 index 000000000000..cdfcb3a610c0 --- /dev/null +++ b/drivers/scsi/spfc/sphw_wq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_wq.c \ No newline at end of file -- 2.20.1

1 0

[PATCH OLK-5.10] SCSI:SPFC, NET:Ethernet:SPNIC: fix compile error
by Yanling Song 09 Nov '21

09 Nov '21

Ramaxel inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4DBD7 CVE: NA Fix two compile errors: 1. Compile failed when O=xxx is specified; 2. Compile confliction when spfc and spnic are compiled in parallel by -j option because they share some .c files Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- drivers/net/ethernet/ramaxel/spnic/Makefile | 2 +- drivers/scsi/spfc/Makefile | 30 ++++++++++----------- drivers/scsi/spfc/sphw_api_cmd.c | 1 + drivers/scsi/spfc/sphw_cmdq.c | 1 + drivers/scsi/spfc/sphw_common.c | 1 + drivers/scsi/spfc/sphw_eqs.c | 1 + drivers/scsi/spfc/sphw_hw_cfg.c | 1 + drivers/scsi/spfc/sphw_hw_comm.c | 1 + drivers/scsi/spfc/sphw_hwdev.c | 1 + drivers/scsi/spfc/sphw_hwif.c | 1 + drivers/scsi/spfc/sphw_mbox.c | 1 + drivers/scsi/spfc/sphw_mgmt.c | 1 + drivers/scsi/spfc/sphw_prof_adap.c | 1 + drivers/scsi/spfc/sphw_wq.c | 1 + 14 files changed, 28 insertions(+), 16 deletions(-) create mode 120000 drivers/scsi/spfc/sphw_api_cmd.c create mode 120000 drivers/scsi/spfc/sphw_cmdq.c create mode 120000 drivers/scsi/spfc/sphw_common.c create mode 120000 drivers/scsi/spfc/sphw_eqs.c create mode 120000 drivers/scsi/spfc/sphw_hw_cfg.c create mode 120000 drivers/scsi/spfc/sphw_hw_comm.c create mode 120000 drivers/scsi/spfc/sphw_hwdev.c create mode 120000 drivers/scsi/spfc/sphw_hwif.c create mode 120000 drivers/scsi/spfc/sphw_mbox.c create mode 120000 drivers/scsi/spfc/sphw_mgmt.c create mode 120000 drivers/scsi/spfc/sphw_prof_adap.c create mode 120000 drivers/scsi/spfc/sphw_wq.c diff --git a/drivers/net/ethernet/ramaxel/spnic/Makefile b/drivers/net/ethernet/ramaxel/spnic/Makefile index f86ccff374f6..207e1d9c431a 100644 --- a/drivers/net/ethernet/ramaxel/spnic/Makefile +++ b/drivers/net/ethernet/ramaxel/spnic/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPNIC) += spnic.o -subdir-ccflags-y += -I$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw spnic-objs := hw/sphw_common.o \ hw/sphw_hwif.o \ diff --git a/drivers/scsi/spfc/Makefile b/drivers/scsi/spfc/Makefile index 02fe0213e048..849b730ac733 100644 --- a/drivers/scsi/spfc/Makefile +++ b/drivers/scsi/spfc/Makefile @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPFC) += spfc.o -subdir-ccflags-y += -I$(src)/../../net/ethernet/ramaxel/spnic/hw -subdir-ccflags-y += -I$(src)/hw -subdir-ccflags-y += -I$(src)/common +subdir-ccflags-y += -I$(srctree)/$(src)/../../net/ethernet/ramaxel/spnic/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/common spfc-objs := common/unf_init.o \ common/unf_event.o \ @@ -33,15 +33,15 @@ spfc-objs := common/unf_init.o \ hw/spfc_cqm_bitmap_table.o \ hw/spfc_cqm_main.o \ hw/spfc_cqm_object.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_common.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_wq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.o + sphw_hwdev.o \ + sphw_hw_cfg.o \ + sphw_hw_comm.o \ + sphw_prof_adap.o \ + sphw_common.o \ + sphw_hwif.o \ + sphw_wq.o \ + sphw_cmdq.o \ + sphw_eqs.o \ + sphw_mbox.o \ + sphw_mgmt.o \ + sphw_api_cmd.o diff --git a/drivers/scsi/spfc/sphw_api_cmd.c b/drivers/scsi/spfc/sphw_api_cmd.c new file mode 120000 index 000000000000..27c7c0770fa3 --- /dev/null +++ b/drivers/scsi/spfc/sphw_api_cmd.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_cmdq.c b/drivers/scsi/spfc/sphw_cmdq.c new file mode 120000 index 000000000000..5ac779ba274b --- /dev/null +++ b/drivers/scsi/spfc/sphw_cmdq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_common.c b/drivers/scsi/spfc/sphw_common.c new file mode 120000 index 000000000000..a1a30a4840e1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_common.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_common.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_eqs.c b/drivers/scsi/spfc/sphw_eqs.c new file mode 120000 index 000000000000..74430dcb9dc5 --- /dev/null +++ b/drivers/scsi/spfc/sphw_eqs.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_cfg.c b/drivers/scsi/spfc/sphw_hw_cfg.c new file mode 120000 index 000000000000..4f43d68624c1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_cfg.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_comm.c b/drivers/scsi/spfc/sphw_hw_comm.c new file mode 120000 index 000000000000..c943b3b2933a --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_comm.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwdev.c b/drivers/scsi/spfc/sphw_hwdev.c new file mode 120000 index 000000000000..b7279f17eaa2 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwdev.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwif.c b/drivers/scsi/spfc/sphw_hwif.c new file mode 120000 index 000000000000..d40ef71f9033 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwif.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mbox.c b/drivers/scsi/spfc/sphw_mbox.c new file mode 120000 index 000000000000..1b00fe7289cc --- /dev/null +++ b/drivers/scsi/spfc/sphw_mbox.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mgmt.c b/drivers/scsi/spfc/sphw_mgmt.c new file mode 120000 index 000000000000..fd18a73e9d3a --- /dev/null +++ b/drivers/scsi/spfc/sphw_mgmt.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_prof_adap.c b/drivers/scsi/spfc/sphw_prof_adap.c new file mode 120000 index 000000000000..fbc7db05dd27 --- /dev/null +++ b/drivers/scsi/spfc/sphw_prof_adap.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_wq.c b/drivers/scsi/spfc/sphw_wq.c new file mode 120000 index 000000000000..cdfcb3a610c0 --- /dev/null +++ b/drivers/scsi/spfc/sphw_wq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_wq.c \ No newline at end of file -- 2.27.0

2 1

【议题申报】主线特性DAMON（Data Access Monitor）回合
by zouyue (A) 09 Nov '21

09 Nov '21

DAMON(Data Access Monitor)特性议题申报 DAMON特性是一个能轻量级在线监控特定用户空间进程的内存访问情况的内核特性模块。通过基于region采样和自适应调整region大小两种核心机制，允许用户态和内核态两种策略定义模式，进行data access访问监控和内存优化管理。应用场景： 1．监控当前内存过负载或者过高的访问频率 2．内存管理优化： 1) 高访问频率的内存区域放到LRU列表头部 2) 低访问频率的内存区域调整到LRU列表尾部或者换出 3) 大内存消耗且高访问频率的区域可以使用较大页 3．监控一些低效率的进程间通信 DAMON总体框架如下： [cid:image003.png@01D7D54E.EA5ABEE0] 特性补丁链接: http://patchwork.huawei.com/project/olk5.10/list/?series=20179

1 0

[PATCH openEuler-1.0-LTS 1/7] ath: Use safer key clearing with key cache entries
by Yang Yingliang 08 Nov '21

08 Nov '21

From: Jouni Malinen <jouni(a)codeaurora.org> stable inclusion from linux-4.19.205 commit dd5815f023b89c9a28325d8a2a5f0779b57b7190 CVE: CVE-2020-3702 -------------------------------- commit 56c5485c9e444c2e85e11694b6c44f1338fc20fd upstream. It is possible for there to be pending frames in TXQs with a reference to the key cache entry that is being deleted. If such a key cache entry is cleared, those pending frame in TXQ might get transmitted without proper encryption. It is safer to leave the previously used key into the key cache in such cases. Instead, only clear the MAC address to prevent RX processing from using this key cache entry. This is needed in particularly in AP mode where the TXQs cannot be flushed on station disconnection. This change alone may not be able to address all cases where the key cache entry might get reused for other purposes immediately (the key cache entry should be released for reuse only once the TXQs do not have any remaining references to them), but this makes it less likely to get unprotected frames and the more complete changes may end up being significantly more complex. Signed-off-by: Jouni Malinen <jouni(a)codeaurora.org> Signed-off-by: Kalle Valo <kvalo(a)codeaurora.org> Link: https://lore.kernel.org/r/20201214172118.18100-2-jouni@codeaurora.org Cc: Pali Rohár <pali(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/wireless/ath/key.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/key.c b/drivers/net/wireless/ath/key.c index 1816b4e7dc264..59618bb41f6c5 100644 --- a/drivers/net/wireless/ath/key.c +++ b/drivers/net/wireless/ath/key.c @@ -583,7 +583,16 @@ EXPORT_SYMBOL(ath_key_config); */ void ath_key_delete(struct ath_common *common, struct ieee80211_key_conf *key) { - ath_hw_keyreset(common, key->hw_key_idx); + /* Leave CCMP and TKIP (main key) configured to avoid disabling + * encryption for potentially pending frames already in a TXQ with the + * keyix pointing to this key entry. Instead, only clear the MAC address + * to prevent RX processing from using this key cache entry. + */ + if (test_bit(key->hw_key_idx, common->ccmp_keymap) || + test_bit(key->hw_key_idx, common->tkip_keymap)) + ath_hw_keysetmac(common, key->hw_key_idx, NULL); + else + ath_hw_keyreset(common, key->hw_key_idx); if (key->hw_key_idx < IEEE80211_WEP_NKID) return; -- 2.25.1

1 6

[PATCH kernel-4.19] vfs: move cap_convert_nscap() call into vfs_setxattr()
by zhangyue 08 Nov '21

08 Nov '21

mainline inclusion category: feature bugzilla:https://gitee.com/openeuler/kernel/issues/I4GVH3?from=project-issue CVE: NA cap_convert_nscap() does permission checking as well as conversion of the xattr value conditionally based on fs's user-ns. This is needed by overlayfs and probably other layered fs (ecryptfs) and is what vfs_foo() is supposed to do anyway. Signed-off-by: Miklos Szeredi <mszeredi(a)redhat.com> Acked-by: James Morris <jamorris(a)linux.microsoft.com> Signed-off-by: zhangyue <zhangyue1(a)kylinos.cn> --- fs/xattr.c | 18 ++++++++++++------ include/linux/capability.h | 2 +- security/commoncap.c | 3 +-- 3 files changed, 14 insertions(+), 9 deletions(-) diff --git a/fs/xattr.c b/fs/xattr.c index adb11cb82be5..653e12d6060f 100644 --- a/fs/xattr.c +++ b/fs/xattr.c @@ -263,8 +263,16 @@ vfs_setxattr(struct dentry *dentry, const char *name, const void *value, { struct inode *inode = dentry->d_inode; struct inode *delegated_inode = NULL; + const void *orig_value = value; int error; + if (size && strcmp(name, XATTR_NAME_CAPS) == 0) { + error = cap_convert_nscap(dentry, &value, size); + if (error < 0) + return error; + size = error; + } + retry_deleg: inode_lock(inode); error = __vfs_setxattr_locked(dentry, name, value, size, flags, @@ -276,6 +284,10 @@ vfs_setxattr(struct dentry *dentry, const char *name, const void *value, if (!error) goto retry_deleg; } + + if (value != orig_value) + kfree(value); + return error; } EXPORT_SYMBOL_GPL(vfs_setxattr); @@ -530,12 +542,6 @@ setxattr(struct dentry *d, const char __user *name, const void __user *value, if ((strcmp(kname, XATTR_NAME_POSIX_ACL_ACCESS) == 0) || (strcmp(kname, XATTR_NAME_POSIX_ACL_DEFAULT) == 0)) posix_acl_fix_xattr_from_user(kvalue, size); - else if (strcmp(kname, XATTR_NAME_CAPS) == 0) { - error = cap_convert_nscap(d, &kvalue, size); - if (error < 0) - goto out; - size = error; - } } error = vfs_setxattr(d, kname, kvalue, size, flags); diff --git a/include/linux/capability.h b/include/linux/capability.h index f640dcbc880c..9fee9a86505c 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -249,6 +249,6 @@ extern bool ptracer_capable(struct task_struct *tsk, struct user_namespace *ns); /* audit system wants to get cap info from files as well */ extern int get_vfs_caps_from_disk(const struct dentry *dentry, struct cpu_vfs_cap_data *cpu_caps); -extern int cap_convert_nscap(struct dentry *dentry, void **ivalue, size_t size); +extern int cap_convert_nscap(struct dentry *dentry, const void **ivalue, size_t size); #endif /* !_LINUX_CAPABILITY_H */ diff --git a/security/commoncap.c b/security/commoncap.c index 876cfe01d939..83546a782796 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -498,7 +498,7 @@ static bool validheader(size_t size, const struct vfs_cap_data *cap) * * If all is ok, we return the new size, on error return < 0. */ -int cap_convert_nscap(struct dentry *dentry, void **ivalue, size_t size) +int cap_convert_nscap(struct dentry *dentry, const void **ivalue, size_t size) { struct vfs_ns_cap_data *nscap; uid_t nsrootid; @@ -541,7 +541,6 @@ int cap_convert_nscap(struct dentry *dentry, void **ivalue, size_t size) nscap->magic_etc = cpu_to_le32(nsmagic); memcpy(&nscap->data, &cap->data, sizeof(__le32) * 2 * VFS_CAP_U32); - kvfree(*ivalue); *ivalue = nscap; return newsize; } -- 2.30.0

1 0

[PATCH openEuler-1.0-LTS] ext4: if zeroout fails fall back to splitting the extent node
by Yang Yingliang 08 Nov '21

08 Nov '21

From: Theodore Ts'o <tytso(a)mit.edu> mainline inclusion from mainline-5.15-rc1 commit 308c57ccf4318236be75dfa251c84713e694457b category: bugfix bugzilla: 109297 CVE: NA --------------------------- If the underlying storage device is using thin-provisioning, it's possible for a zeroout operation to return ENOSPC. Commit df22291ff0fd ("ext4: Retry block allocation if we have free blocks left") added logic to retry block allocation since we might get free block after we commit a transaction. But the ENOSPC from thin-provisioning will confuse ext4, and lead to an infinite loop. Since using zeroout instead of splitting the extent node is an optimization, if it fails, we might as well fall back to splitting the extent node. Reported-by: yangerkun <yangerkun(a)huawei.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Signed-off-by: yangerkun <yangerkun(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/ext4/extents.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index fc00a78163117..10298c13a67d7 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -3696,7 +3696,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, split_map.m_len - ee_block); err = ext4_ext_zeroout(inode, &zero_ex1); if (err) - goto out; + goto fallback; split_map.m_len = allocated; } if (split_map.m_lblk - ee_block + split_map.m_len < @@ -3710,7 +3710,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, ext4_ext_pblock(ex)); err = ext4_ext_zeroout(inode, &zero_ex2); if (err) - goto out; + goto fallback; } split_map.m_len += split_map.m_lblk - ee_block; @@ -3719,6 +3719,7 @@ static int ext4_ext_convert_to_initialized(handle_t *handle, } } +fallback: err = ext4_split_extent(handle, inode, ppath, &split_map, split_flag, flags); if (err > 0) -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] dccp: don't duplicate ccid when cloning dccp sock
by Yang Yingliang 08 Nov '21

08 Nov '21

From: "Lin, Zhenpeng" <zplin(a)psu.edu> mainline inclusion from mainline-v5.15-rc2 commit d9ea761fdd197351890418acd462c51f241014a7 category: bugfix bugzilla: 85666 CVE: CVE-2020-16119 ------------------------------------------------- Commit 2677d2067731 ("dccp: don't free ccid2_hc_tx_sock ...") fixed a UAF but reintroduced CVE-2017-6074. When the sock is cloned, two dccps_hc_tx_ccid will reference to the same ccid. So one can free the ccid object twice from two socks after cloning. This issue was found by "Hadar Manor" as well and assigned with CVE-2020-16119, which was fixed in Ubuntu's kernel. So here I port the patch from Ubuntu to fix it. The patch prevents cloned socks from referencing the same ccid. Fixes: 2677d2067731410 ("dccp: don't free ccid2_hc_tx_sock ...") Signed-off-by: Zhenpeng Lin <zplin(a)psu.edu> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Lu Wei <luwei32(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/dccp/minisocks.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index ba6fc3c1186b9..e91838a7b8497 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -98,6 +98,8 @@ struct sock *dccp_create_openreq_child(const struct sock *sk, newdp->dccps_role = DCCP_ROLE_SERVER; newdp->dccps_hc_rx_ackvec = NULL; newdp->dccps_service_list = NULL; + newdp->dccps_hc_rx_ccid = NULL; + newdp->dccps_hc_tx_ccid = NULL; newdp->dccps_service = dreq->dreq_service; newdp->dccps_timestamp_echo = dreq->dreq_timestamp_echo; newdp->dccps_timestamp_time = dreq->dreq_timestamp_time; -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 01/14] Revert "selftests/bpf: add test_spec_readahead_xfs_file to support specail async readahead"
by Yang Yingliang 05 Nov '21

05 Nov '21

From: Hou Tao <houtao1(a)huawei.com> hulk inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4H3JT CVE: NA --------------------------- There are two issues with the current solution: 1) tracepoint xfs_read_file is visible in tracefs It forms an ABI for userspace. It is bad because new field may be added into xfs_writable_file to export more information to userspace. 2) tracepoint xfs_read_file is specific to xfs HDFS can be stacked on ext4. A new solution is proposed which uses vfs bare tracepoint, so reverts commit 69513cfbe62d267c4a5e6025f31741b1f2cb946c. Signed-off-by: Hou Tao <houtao1(a)huawei.com> Reviewed-by: Kuohai Xu <xukuohai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- tools/include/uapi/linux/xfs.h | 1 - tools/testing/selftests/bpf/Makefile | 3 +- .../bpf/test_spec_readahead_xfs_file.c | 39 ------------------- tools/testing/selftests/bpf/test_xfs_file.c | 9 +---- 4 files changed, 3 insertions(+), 49 deletions(-) delete mode 100644 tools/testing/selftests/bpf/test_spec_readahead_xfs_file.c diff --git a/tools/include/uapi/linux/xfs.h b/tools/include/uapi/linux/xfs.h index 1409b45affd34..a0d37e411ee18 100644 --- a/tools/include/uapi/linux/xfs.h +++ b/tools/include/uapi/linux/xfs.h @@ -6,7 +6,6 @@ #define FMODE_RANDOM (0x1000) #define FMODE_WILLNEED (0x400000) -#define FMODE_SPC_READAHEAD (0x800000) struct xfs_writable_file { const unsigned char *name; diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile index 46b1d5b864f5a..8d2737285f185 100644 --- a/tools/testing/selftests/bpf/Makefile +++ b/tools/testing/selftests/bpf/Makefile @@ -36,8 +36,7 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test test_get_stack_rawtp.o test_sockmap_kern.o test_sockhash_kern.o \ test_lwt_seg6local.o sendmsg4_prog.o sendmsg6_prog.o test_lirc_mode2_kern.o \ get_cgroup_id_kern.o socket_cookie_prog.o test_select_reuseport_kern.o \ - test_skb_cgroup_id_kern.o test_set_xfs_file.o test_clear_xfs_file.o \ - test_spec_readahead_xfs_file.o + test_skb_cgroup_id_kern.o test_set_xfs_file.o test_clear_xfs_file.o # Order correspond to 'make run_tests' order TEST_PROGS := test_kmod.sh \ diff --git a/tools/testing/selftests/bpf/test_spec_readahead_xfs_file.c b/tools/testing/selftests/bpf/test_spec_readahead_xfs_file.c deleted file mode 100644 index ff8794a14cdcd..0000000000000 --- a/tools/testing/selftests/bpf/test_spec_readahead_xfs_file.c +++ /dev/null @@ -1,39 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 - -#include <linux/bpf.h> -#include "bpf_helpers.h" -#include <string.h> -#include <linux/xfs.h> - -/* from /sys/kernel/debug/tracing/events/xfs/xfs_read_file */ -struct xfs_read_buffer_args { - struct xfs_writable_file *file; -}; - -SEC("tracepoint/xfs/xfs_file_read") -int bpf_prog1(struct xfs_read_buffer_args *ctx) -{ - char fmt[] = "name: %s, set f_mode: %u\n"; - struct xfs_writable_file *file = ctx->file; - char name[64] = {}; - char *tmp; - unsigned long i_size; - int len; - - bpf_probe_read(&tmp, 8, &(file->name)); - len = bpf_probe_read_str(name, 64, tmp); - bpf_probe_read(&i_size, 8, &(file->i_size)); - - if (!strncmp("blk_", name, 4)) { - /* blk_xxx.meta or blk_xxx with size < 2M */ - if (len == 27 || (len == 15 && i_size <= 2 * 1024 * 1024)) - file->f_mode |= FMODE_WILLNEED; - else if (len == 15) /* blk_xxx */ - file->f_mode |= FMODE_SPC_READAHEAD; - bpf_trace_printk(fmt, sizeof(fmt), name, file->f_mode); - } - return 0; -} - -char _license[] SEC("license") = "GPL"; -__u32 _version SEC("version") = 1; diff --git a/tools/testing/selftests/bpf/test_xfs_file.c b/tools/testing/selftests/bpf/test_xfs_file.c index 89e79d959677c..247c42be029b2 100644 --- a/tools/testing/selftests/bpf/test_xfs_file.c +++ b/tools/testing/selftests/bpf/test_xfs_file.c @@ -20,7 +20,6 @@ int main(int argc, char *argv[]) { const char *set_file = "./test_set_xfs_file.o"; const char *clear_file = "./test_clear_xfs_file.o"; - const char *spec_readahead_file = "./test_spec_readahead_xfs_file.o"; const char *file = set_file; struct bpf_object *obj; int efd, err, prog_fd; @@ -32,12 +31,8 @@ int main(int argc, char *argv[]) delay = strtol(str, &endptr, 10); } - if (argc >= 2) { - if (!strcmp("clear", argv[1])) - file = clear_file; - if (!strcmp("spec_readahead", argv[1])) - file = spec_readahead_file; - } + if (argc >= 2 && !strcmp("clear", argv[1])) + file = clear_file; err = bpf_prog_load(file, BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, &obj, &prog_fd); -- 2.25.1

1 13

[PATCH OLK-5.10 v3] Net:NIC:SPNIC:Fix compile error when O= is specififed
by Yanling Song 05 Nov '21

05 Nov '21

Ramaxel inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4CBDP CVE: NA Net:NIC:SPNIC:Fix compile error when O= is specififed Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- Changes from V2: Move the location of "Changes from" Changes from V1: 1. Change category from feature to bugfix; 2. Add description --- drivers/net/ethernet/ramaxel/spnic/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ramaxel/spnic/Makefile b/drivers/net/ethernet/ramaxel/spnic/Makefile index f86ccff374f6..207e1d9c431a 100644 --- a/drivers/net/ethernet/ramaxel/spnic/Makefile +++ b/drivers/net/ethernet/ramaxel/spnic/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPNIC) += spnic.o -subdir-ccflags-y += -I$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw spnic-objs := hw/sphw_common.o \ hw/sphw_hwif.o \ -- 2.27.0

1 0

[PATCH openEuler-1.0-LTS] EMMC: fix ascend hisi emmc probe failed problem according to mmc_host struct
by Yang Yingliang 04 Nov '21

04 Nov '21

From: zhangguijiang <zhangguijiang(a)huawei.com> ascend inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4GVSG CVE: NA ------------------- Struct mmc_host using variable private[0] to point the end of struct mmc_host, at deaf01a6 we modified struct mmc_host but ignored the role of private[0] and not put it to the end of struct mmc_host. It will make mmc card probe failed, so we fix this problem, and now ascend hisi mmc card is able to probe success. Signed-off-by: zhangguijiang <zhangguijiang(a)huawei.com> Reviewed-by: Ding Tianhong <dingtianhong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/mmc/core/sd.c | 38 +++----------------------------- drivers/mmc/host/dw_mmc_extern.h | 2 +- include/linux/mmc/host.h | 2 +- 3 files changed, 5 insertions(+), 37 deletions(-) diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 20ca371b9f874..8760b749292b8 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1163,9 +1163,9 @@ static int _mmc_sd_suspend(struct mmc_host *host) err = mmc_deselect_cards(host); if (!err) { - if (!(mmc_is_ascend_customized(host->parent))) + if (!mmc_is_ascend_customized(host->parent)) mmc_power_off(host); - else if (mmc_card_keep_power(host)) + else if (!mmc_card_keep_power(host)) mmc_power_off(host); mmc_card_set_suspended(host->card); } @@ -1269,42 +1269,10 @@ static int mmc_sd_runtime_resume(struct mmc_host *host) return 0; } -#ifdef CONFIG_ASCEND_HISI_MMC -/*********************sd ops begin**********************/ -static int mmc_do_sd_reset(struct mmc_host *host) -{ - struct mmc_card *card = host->card; - - if (!host->bus_ops->power_restore) - return -EOPNOTSUPP; - - if (!card) - return -EINVAL; - - /* hw_reset for ip reset */ - if (host->ops->hw_reset) - host->ops->hw_reset(host); - - /* Only for K930/920 SD slow down clk*/ - if (host->ops->slowdown_clk) - host->ops->slowdown_clk(host, host->ios.timing); - - mmc_power_off(host); - mmc_set_clock(host, host->f_init); - /* Wait at least 200 ms */ - mmc_delay(200); - mmc_power_up(host, host->card->ocr); - (void)mmc_select_voltage(host, host->card->ocr); - - return host->bus_ops->power_restore(host); -} -#endif static int mmc_sd_hw_reset(struct mmc_host *host) { -#ifdef CONFIG_ASCEND_HISI_MMC if (mmc_is_ascend_customized(host->parent)) - return mmc_do_sd_reset(host); -#endif + return mmc_sd_reset(host); mmc_power_cycle(host, host->card->ocr); return mmc_sd_init_card(host, host->card->ocr, host->card); } diff --git a/drivers/mmc/host/dw_mmc_extern.h b/drivers/mmc/host/dw_mmc_extern.h index 04d8c23f39e9a..ab077b4955940 100644 --- a/drivers/mmc/host/dw_mmc_extern.h +++ b/drivers/mmc/host/dw_mmc_extern.h @@ -8,7 +8,7 @@ #include "dw_mmc.h" -#ifdef CONFIG_MMC_DW_HI3XXX_MODULE +#if defined(CONFIG_MMC_DW_HI3XXX) || defined(CONFIG_MMC_DW_HI3XXX_MODULE) extern void dw_mci_reg_dump(struct dw_mci *host); extern void dw_mci_set_timeout(struct dw_mci *host); extern bool dw_mci_stop_abort_cmd(struct mmc_command *cmd); diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index 78b4d0a813b71..fabc23d156242 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -542,13 +542,13 @@ struct mmc_host { bool cqe_enabled; bool cqe_on; - unsigned long private[0] ____cacheline_aligned; #ifdef CONFIG_ASCEND_HISI_MMC const struct mmc_cmdq_host_ops *cmdq_ops; int sdio_present; unsigned int cmdq_slots; struct mmc_cmdq_context_info cmdq_ctx; #endif + unsigned long private[0] ____cacheline_aligned; }; struct device_node; -- 2.25.1

1 0

[PATCH OLK-5.10 v2] Net:NIC:SPNIC:Fix compile error when O= is specififed
by Yanling Song 04 Nov '21

04 Nov '21

Ramaxel inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4CBDP CVE: NA Change from V1: 1. Change category from feature to bugfix; 2. Add description Net:NIC:SPNIC:Fix compile error when O= is specififed Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- drivers/net/ethernet/ramaxel/spnic/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ramaxel/spnic/Makefile b/drivers/net/ethernet/ramaxel/spnic/Makefile index f86ccff374f6..207e1d9c431a 100644 --- a/drivers/net/ethernet/ramaxel/spnic/Makefile +++ b/drivers/net/ethernet/ramaxel/spnic/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPNIC) += spnic.o -subdir-ccflags-y += -I$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw spnic-objs := hw/sphw_common.o \ hw/sphw_hwif.o \ -- 2.27.0

2 1

[PATCH openEuler-1.0-LTS] Bluetooth: cmtp: fix file refcount when cmtp_attach_device fails
by Yang Yingliang 04 Nov '21

04 Nov '21

From: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> mainline inclusion from mainline-v5.14-rc1 commit 3cfdf8fcaafa62a4123f92eb0f4a72650da3a479 category: bugfix bugzilla: NA CVE: CVE-2021-34981 ------------------------------------------------- When cmtp_attach_device fails, cmtp_add_connection returns the error value which leads to the caller to doing fput through sockfd_put. But cmtp_session kthread, which is stopped in this path will also call fput, leading to a potential refcount underflow or a use-after-free. Add a refcount before we signal the kthread to stop. The kthread will try to grab the cmtp_session_sem mutex before doing the fput, which is held when get_file is called, so there should be no races there. Reported-by: Ryota Shiga Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: weiyang wang <wangweiyang2(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/bluetooth/cmtp/core.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/bluetooth/cmtp/core.c b/net/bluetooth/cmtp/core.c index 7f26a5a19ff6d..9873684a9d8ff 100644 --- a/net/bluetooth/cmtp/core.c +++ b/net/bluetooth/cmtp/core.c @@ -391,6 +391,11 @@ int cmtp_add_connection(struct cmtp_connadd_req *req, struct socket *sock) if (!(session->flags & BIT(CMTP_LOOPBACK))) { err = cmtp_attach_device(session); if (err < 0) { + /* Caller will call fput in case of failure, and so + * will cmtp_session kthread. + */ + get_file(session->sock->file); + atomic_inc(&session->terminate); wake_up_interruptible(sk_sleep(session->sock->sk)); up_write(&cmtp_session_sem); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] scsi: hisi_sas: print status and error when sata io abnormally completed
by Yang Yingliang 04 Nov '21

04 Nov '21

From: Xingui Yang <yangxingui(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA --------------------- To help debugging efforts, print d2h status and error D2H: FIS Status Bits = 0x53 BSY = 0... .... Off DRDY = .1.. .... On DF = ..0. .... Off DSC = ...1 .... On DRQ = .... 0... Off Alignment Error = .... .0.. Off Sense Data Available = .... ..1. On ERR = .... ...1 On FIS Error Bits = 0x40 ICRC = 0... .... Off UNC = .1.. .... On MC (O) = ..0. .... Off IDNF = ...0 .... Off MCR (O) = .... 0... Off ABRT = .... .0.. Off EOM = .... ..0. Off CCTO = .... ...0 Off Here is an example print: hisi_sas_v3_hw 0000:74:02.0: sata d2h status 0x53, error 0x40 Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> Reviewed by kangfenglong <kangfenglong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index babf6486af526..4508c4a2f02fc 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -2419,6 +2419,19 @@ slot_complete_v3_hw(struct hisi_hba *hisi_hba, struct hisi_sas_slot *slot) error_info[0], error_info[1], error_info[2], error_info[3]); + if ((complete_hdr->dw0 & CMPLT_HDR_RSPNS_XFRD_MSK) && + (task->task_proto & SAS_PROTOCOL_SATA || + task->task_proto & SAS_PROTOCOL_STP)) { + struct hisi_sas_status_buffer *status_buf = + hisi_sas_status_buf_addr_mem(slot); + u8 *iu = &status_buf->iu[0]; + struct dev_to_host_fis *d2h = + (struct dev_to_host_fis *)iu; + + dev_info(dev, "sata d2h status 0x%02x, error 0x%02x\n", + d2h->status, d2h->error); + } + if ((error_info[3] & RX_DATA_LEN_UNDERFLOW_MSK) && (task->task_proto == SAS_PROTOCOL_SSP)) { /*print detail sense info when data underflow happened*/ -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/2] Revert "scsi: hisi_sas: replace spin_lock_irqsave/spin_unlock_restore with spin_lock/spin_unlock"
by Yang Yingliang 04 Nov '21

04 Nov '21

From: Xingui Yang <yangxingui(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA --------------------- This reverts commit 5c725a983c0dedd067e5e643633db6fb5ecbeb91. this optimization patch depends on the kernel block MQ patch. If the block MQ patch is not integrated, there is a possibility that the spinlock deadlock occurs. Signed-off-by: Xingui Yang <yangxingui(a)huawei.com> Reviewed-by: Kangfenglong <kangfenglong(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/scsi/hisi_sas/hisi_sas_main.c | 50 ++++++++++++++------------ drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 12 ++++--- 2 files changed, 35 insertions(+), 27 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index bde4307596234..39fe67239f929 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -172,11 +172,13 @@ static void hisi_sas_slot_index_clear(struct hisi_hba *hisi_hba, int slot_idx) static void hisi_sas_slot_index_free(struct hisi_hba *hisi_hba, int slot_idx) { + unsigned long flags; + if (hisi_hba->hw->slot_index_alloc || (slot_idx >= hisi_hba->hw->max_command_entries - HISI_SAS_RESERVED_IPTT_CNT)) { - spin_lock(&hisi_hba->lock); + spin_lock_irqsave(&hisi_hba->lock, flags); hisi_sas_slot_index_clear(hisi_hba, slot_idx); - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); } } @@ -192,12 +194,13 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, { int index; void *bitmap = hisi_hba->slot_index_tags; + unsigned long flags; if (scsi_cmnd) { return scsi_cmnd->request->tag; } - spin_lock(&hisi_hba->lock); + spin_lock_irqsave(&hisi_hba->lock, flags); index = find_next_zero_bit(bitmap, hisi_hba->slot_index_count, hisi_hba->last_slot_index + 1); if (index >= hisi_hba->slot_index_count) { @@ -206,13 +209,13 @@ static int hisi_sas_slot_index_alloc(struct hisi_hba *hisi_hba, hisi_hba->hw->max_command_entries - HISI_SAS_RESERVED_IPTT_CNT); if (index >= hisi_hba->slot_index_count) { - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return -SAS_QUEUE_FULL; } } hisi_sas_slot_index_set(hisi_hba, index); hisi_hba->last_slot_index = index; - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return index; } @@ -228,6 +231,7 @@ static void hisi_sas_slot_index_init(struct hisi_hba *hisi_hba) void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task, struct hisi_sas_slot *slot) { + unsigned long flags; int device_id = slot->device_id; struct hisi_sas_device *sas_dev = &hisi_hba->devices[device_id]; @@ -256,9 +260,9 @@ void hisi_sas_slot_task_free(struct hisi_hba *hisi_hba, struct sas_task *task, } } - spin_lock(&sas_dev->lock); + spin_lock_irqsave(&sas_dev->lock, flags); list_del_init(&slot->entry); - spin_unlock(&sas_dev->lock); + spin_unlock_irqrestore(&sas_dev->lock, flags); memset(slot, 0, offsetof(struct hisi_sas_slot, buf)); @@ -510,14 +514,14 @@ static int hisi_sas_task_prep(struct sas_task *task, slot_idx = rc; slot = &hisi_hba->slot_info[slot_idx]; - spin_lock(&dq->lock); + spin_lock_irqsave(&dq->lock, flags); wr_q_index = dq->wr_point; dq->wr_point = (dq->wr_point + 1) % HISI_SAS_QUEUE_SLOTS; list_add_tail(&slot->delivery, &dq->list); - spin_unlock(&dq->lock); - spin_lock(&sas_dev->lock); + spin_unlock_irqrestore(&dq->lock, flags); + spin_lock_irqsave(&sas_dev->lock, flags); list_add_tail(&slot->entry, &sas_dev->list); - spin_unlock(&sas_dev->lock); + spin_unlock_irqrestore(&sas_dev->lock, flags); dlvry_queue = dq->id; dlvry_queue_slot = wr_q_index; @@ -583,6 +587,7 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags, { u32 rc; u32 pass = 0; + unsigned long flags; struct hisi_hba *hisi_hba; struct device *dev; struct domain_device *device = task->dev; @@ -616,9 +621,9 @@ static int hisi_sas_task_exec(struct sas_task *task, gfp_t gfp_flags, dev_err(dev, "task exec: failed[%d]!\n", rc); if (likely(pass)) { - spin_lock(&dq->lock); + spin_lock_irqsave(&dq->lock, flags); hisi_hba->hw->start_delivery(dq); - spin_unlock(&dq->lock); + spin_unlock_irqrestore(&dq->lock, flags); } return rc; @@ -669,11 +674,12 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device) { struct hisi_hba *hisi_hba = dev_to_hisi_hba(device); struct hisi_sas_device *sas_dev = NULL; + unsigned long flags; int first = (hisi_hba->last_dev_id + 1) % HISI_SAS_MAX_DEVICES; int dev_id; int i; - spin_lock(&hisi_hba->lock); + spin_lock_irqsave(&hisi_hba->lock, flags); for (i = first; i < first + HISI_SAS_MAX_DEVICES; i++) { dev_id = i % HISI_SAS_MAX_DEVICES; if (hisi_hba->devices[dev_id].dev_type == SAS_PHY_UNUSED) { @@ -694,7 +700,7 @@ static struct hisi_sas_device *hisi_sas_alloc_dev(struct domain_device *device) } if (sas_dev) hisi_hba->last_dev_id = i; - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return sas_dev; } @@ -1964,7 +1970,7 @@ hisi_sas_internal_abort_task_exec(struct hisi_hba *hisi_hba, struct asd_sas_port *sas_port = device->port; struct hisi_sas_cmd_hdr *cmd_hdr_base; int dlvry_queue_slot, dlvry_queue, n_elem = 0, rc, slot_idx; - unsigned long flags; + unsigned long flags, flags_dq = 0; int wr_q_index; if (unlikely(test_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags))) @@ -1983,14 +1989,14 @@ hisi_sas_internal_abort_task_exec(struct hisi_hba *hisi_hba, slot_idx = rc; slot = &hisi_hba->slot_info[slot_idx]; - spin_lock(&dq->lock); + spin_lock_irqsave(&dq->lock, flags_dq); wr_q_index = dq->wr_point; dq->wr_point = (dq->wr_point + 1) % HISI_SAS_QUEUE_SLOTS; list_add_tail(&slot->delivery, &dq->list); - spin_unlock(&dq->lock); - spin_lock(&sas_dev->lock); + spin_unlock_irqrestore(&dq->lock, flags_dq); + spin_lock_irqsave(&sas_dev->lock, flags); list_add_tail(&slot->entry, &sas_dev->list); - spin_unlock(&sas_dev->lock); + spin_unlock_irqrestore(&sas_dev->lock, flags); dlvry_queue = dq->id; dlvry_queue_slot = wr_q_index; @@ -2019,9 +2025,9 @@ hisi_sas_internal_abort_task_exec(struct hisi_hba *hisi_hba, spin_unlock_irqrestore(&task->task_state_lock, flags); WRITE_ONCE(slot->ready, 1); /* send abort command to the chip */ - spin_lock(&dq->lock); + spin_lock_irqsave(&dq->lock, flags); hisi_hba->hw->start_delivery(dq); - spin_unlock(&dq->lock); + spin_unlock_irqrestore(&dq->lock, flags); return 0; diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 730191e7f55b8..fa4233454dccb 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -778,6 +778,7 @@ slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba, struct hisi_sas_device *sas_dev = device->lldd_dev; int sata_idx = sas_dev->sata_idx; int start, end; + unsigned long flags; if (!sata_dev) { /* @@ -801,12 +802,12 @@ slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba, end = 64 * (sata_idx + 2); } - spin_lock(&hisi_hba->lock); + spin_lock_irqsave(&hisi_hba->lock, flags); while (1) { start = find_next_zero_bit(bitmap, hisi_hba->slot_index_count, start); if (start >= end) { - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return -SAS_QUEUE_FULL; } /* @@ -818,7 +819,7 @@ slot_index_alloc_quirk_v2_hw(struct hisi_hba *hisi_hba, } set_bit(start, bitmap); - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return start; } @@ -847,8 +848,9 @@ hisi_sas_device *alloc_dev_quirk_v2_hw(struct domain_device *device) struct hisi_sas_device *sas_dev = NULL; int i, sata_dev = dev_is_sata(device); int sata_idx = -1; + unsigned long flags; - spin_lock(&hisi_hba->lock); + spin_lock_irqsave(&hisi_hba->lock, flags); if (sata_dev) if (!sata_index_alloc_v2_hw(hisi_hba, &sata_idx)) @@ -879,7 +881,7 @@ hisi_sas_device *alloc_dev_quirk_v2_hw(struct domain_device *device) } out: - spin_unlock(&hisi_hba->lock); + spin_unlock_irqrestore(&hisi_hba->lock, flags); return sas_dev; } -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS 01/18] net: hns3: limit bd numbers when getting dfx regs.
by Yang Yingliang 04 Nov '21

04 Nov '21

From: Yonglong Liu <liuyonglong(a)huawei.com> driver inclusion category: bugfix bugzilla: NA CVE: NA ---------------------------- When getting dfx regs, the bd numbers from the firmware may be very big which is not expected, and cause the buffer size overflow. This patch limit the max bd numbers to 64 to fix the problem. Signed-off-by: Yonglong Liu <liuyonglong(a)huawei.com> Reviewed-by: li yongxin <liyongxin1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index 8507eb60450fe..ac5f502d5e9be 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -11180,6 +11180,8 @@ static int hclge_get_dfx_reg_len(struct hclge_dev *hdev, int *len) static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data) { +#define HCLGE_DFX_BD_NUM_MAX 64 + u32 dfx_reg_type_num = ARRAY_SIZE(hclge_dfx_bd_offset_list); int bd_num, bd_num_max, buf_len, i; struct hclge_desc *desc_src; @@ -11202,6 +11204,13 @@ static int hclge_get_dfx_reg(struct hclge_dev *hdev, void *data) for (i = 1; i < dfx_reg_type_num; i++) bd_num_max = max_t(int, bd_num_max, bd_num_list[i]); + if (bd_num_max > HCLGE_DFX_BD_NUM_MAX) { + dev_err(&hdev->pdev->dev, + "Get dfx reg fail, invalid bd number: %d\n", + bd_num_max); + goto out; + } + buf_len = sizeof(*desc_src) * bd_num_max; desc_src = kzalloc(buf_len, GFP_KERNEL); if (!desc_src) { -- 2.25.1

1 17

[PATCH openEuler-1.0-LTS 1/2] s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant
by Yang Yingliang 04 Nov '21

04 Nov '21

From: Ilya Leoshkevich <iii(a)linux.ibm.com> stable inclusion from linux-4.19.207 commit e15c2fe2def24324bfdbfb7ec2837e40b2aac7fd CVE: CVE-2021-20320 -------------------------------- commit 6e61dc9da0b7a0d91d57c2e20b5ea4fd2d4e7e53 upstream. The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh <johan.almbladh(a)anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca(a)linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii(a)linux.ibm.com> Signed-off-by: Vasily Gorbik <gor(a)linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: He Fengqing <hefengqing(a)huawei.com> Reviewed-by: weiyang wang <wangweiyang2(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/s390/net/bpf_jit_comp.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c index 914b655eb5ba7..a8ee2f5c827d6 100644 --- a/arch/s390/net/bpf_jit_comp.c +++ b/arch/s390/net/bpf_jit_comp.c @@ -595,8 +595,13 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp, int i case BPF_ALU64 | BPF_SUB | BPF_K: /* dst = dst - imm */ if (!imm) break; - /* agfi %dst,-imm */ - EMIT6_IMM(0xc2080000, dst_reg, -imm); + if (imm == -0x80000000) { + /* algfi %dst,0x80000000 */ + EMIT6_IMM(0xc20a0000, dst_reg, 0x80000000); + } else { + /* agfi %dst,-imm */ + EMIT6_IMM(0xc2080000, dst_reg, -imm); + } break; /* * BPF_MUL -- 2.25.1

1 1

[PATCH openEuler-21.09 2/2] tools: add a tool to calculate the CPU utilization rate
by Hongyu Li 03 Nov '21

03 Nov '21

openEuler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4CIJQ CVE: NA ---------------------------------------------------------------------- This tool can help calculate the CPU utilization rate in higher precision. Signed-off-by: Hongyu Li <543306408(a)qq.com> --- tools/accounting/Makefile | 2 +- tools/accounting/cpu_rate_cal.c | 91 ++++++++++++++++++++++++++++ tools/accounting/cpu_rate_cal_readme | 15 +++++ 3 files changed, 107 insertions(+), 1 deletion(-) create mode 100644 tools/accounting/cpu_rate_cal.c create mode 100644 tools/accounting/cpu_rate_cal_readme diff --git a/tools/accounting/Makefile b/tools/accounting/Makefile index 03687f19cbb1..471fbdd7b07b 100644 --- a/tools/accounting/Makefile +++ b/tools/accounting/Makefile @@ -2,7 +2,7 @@ CC := $(CROSS_COMPILE)gcc CFLAGS := -I../../usr/include -PROGS := getdelays +PROGS := getdelays cpu_rate_cal all: $(PROGS) diff --git a/tools/accounting/cpu_rate_cal.c b/tools/accounting/cpu_rate_cal.c new file mode 100644 index 000000000000..6d621b37c70e --- /dev/null +++ b/tools/accounting/cpu_rate_cal.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * idle_cal.c + * + * Copyright (C) 2021 + * + * cpu idle time accouting + */ + + +#include <stdlib.h> +#include <stdio.h> +#include <fcntl.h> +#include <string.h> +#include <unistd.h> +#include <time.h> +#include <limits.h> +#include <sys/time.h> + +#define BUFFSIZE 4096 +#define HZ 100 +#define FILE_NAME "/proc/stat2" + +struct cpu_info { + char name[BUFFSIZE]; + long long value[1]; +}; + +int main(void) +{ + int cpu_number = sysconf(_SC_NPROCESSORS_ONLN); + struct cpu_info *cpus = (struct cpu_info *)malloc(sizeof(struct cpu_info)*cpu_number); + struct cpu_info *cpus_2 = (struct cpu_info *)malloc(sizeof(struct cpu_info)*cpu_number); + + char buf[BUFFSIZE]; + long long sub; + double value; + + while (1) { + FILE *fp = fopen(FILE_NAME, "r"); + int i = 0; + struct timeval start, end; + + + while (i < cpu_number+1) { + int n = fscanf(fp, "%s %lld\n", cpus[i].name, &cpus[i].value[0]); + + if (n < 0) { + printf("wrong"); + return -1; + } + i += 1; + } + + gettimeofday(&start, NULL); + fflush(fp); + fclose(fp); + i = 0; + + sleep(1); + + FILE *fp_2 = fopen(FILE_NAME, "r"); + + while (i < cpu_number+1) { + int n = fscanf(fp_2, "%s %lld\n", cpus_2[i].name, &cpus_2[i].value[0]); + + if (n < 0) { + printf("wrong"); + return -1; + } + i += 1; + } + + gettimeofday(&end, NULL); + fflush(fp); + fclose(fp_2); + + sub = end.tv_sec-start.tv_sec; + value = sub*1000000.0+end.tv_usec-start.tv_usec; + system("reset"); + printf("CPU idle rate %f\n", 1000000/HZ*(cpus_2[0].value[0]-cpus[0].value[0]) + /value); + + for (int i = 1; i < cpu_number+1; i++) { + printf("CPU%d idle rate %f\n", i-1, 1-1000000/HZ + *(cpus_2[i].value[0]-cpus[i].value[0])/value); + } + } + return 0; +} + diff --git a/tools/accounting/cpu_rate_cal_readme b/tools/accounting/cpu_rate_cal_readme new file mode 100644 index 000000000000..01b5d8d930fe --- /dev/null +++ b/tools/accounting/cpu_rate_cal_readme @@ -0,0 +1,15 @@ +# calculate the cpu utilization rate + +The cpu_rate_cal.c is a tool to calculate the cpu utilization rate. It prints the cpu utilization per 1 second. The first line is the cpu utilization of all the cpus and other lines are the cpu utilizations of each cpu. + +This tool can be compiled by running + +```C +gcc cpu_rate_cal.c -o cpu_rate_cal +``` + +We can use it by running + +```C +./cpu_rate_cal +``` -- 2.17.1

1 0

[PATCH openEuler-21.09 1/2] eulerfs: add the /proc/stat2 file
by Hongyu Li 03 Nov '21

03 Nov '21

openEuler inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4CIJQ CVE: NA ---------------------------------------------------------------------- The default way of calculating CPU utilization is to check which task is executed during the interval of two ticks. This leads to the inaccurate results of CPU utilization. This problem can be solved by counting the idle time via scheduler rather than the tick interval. We can record the time before executing idle process and calculate the execute time before quiting the idle process. The idle time of each CPU is given in the /proc/stat2 file. This way can give higher precision in accounting the CPU idle time compared with the /proc/stat. Signed-off-by: Hongyu Li <543306408(a)qq.com> --- fs/proc/Kconfig | 7 ++++ fs/proc/Makefile | 1 + fs/proc/stat2.c | 91 ++++++++++++++++++++++++++++++++++++++++++ kernel/sched/cputime.c | 34 ++++++++++++++++ kernel/sched/idle.c | 38 ++++++++++++++++++ 5 files changed, 171 insertions(+) create mode 100644 fs/proc/stat2.c diff --git a/fs/proc/Kconfig b/fs/proc/Kconfig index c930001056f9..33588a37579e 100644 --- a/fs/proc/Kconfig +++ b/fs/proc/Kconfig @@ -107,3 +107,10 @@ config PROC_PID_ARCH_STATUS config PROC_CPU_RESCTRL def_bool n depends on PROC_FS + +config PROC_IDLE + bool "include /proc/stat2 file" + depends on PROC_FS + default y + help + Provide the CPU idle time in the /proc/stat2 file. diff --git a/fs/proc/Makefile b/fs/proc/Makefile index 8704d41dd67c..b0d5f2b347d7 100644 --- a/fs/proc/Makefile +++ b/fs/proc/Makefile @@ -34,5 +34,6 @@ proc-$(CONFIG_PROC_VMCORE) += vmcore.o proc-$(CONFIG_PRINTK) += kmsg.o proc-$(CONFIG_PROC_PAGE_MONITOR) += page.o proc-$(CONFIG_BOOT_CONFIG) += bootconfig.o +proc-$(CONFIG_PROC_IDLE) += stat2.o obj-$(CONFIG_ETMEM_SCAN) += etmem_scan.o obj-$(CONFIG_ETMEM_SWAP) += etmem_swap.o diff --git a/fs/proc/stat2.c b/fs/proc/stat2.c new file mode 100644 index 000000000000..6036a946c71d --- /dev/null +++ b/fs/proc/stat2.c @@ -0,0 +1,91 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * linux/fs/proc/stat2.c + * + * Copyright (C) 2007 + * + * cpu idle time accouting + */ + +#include <linux/cpumask.h> +#include <linux/device.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/proc_fs.h> +#include <linux/sched.h> +#include <linux/sched/stat.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/time.h> +#include <linux/irqnr.h> +#include <linux/sched/cputime.h> +#include <linux/tick.h> + +#ifdef CONFIG_PROC_IDLE + +#define PROC_NAME "stat2" + +extern u64 cal_idle_sum_exec_runtime(int cpu); + +static u64 get_idle_sum_exec_runtime(int cpu) +{ + u64 idle = cal_idle_sum_exec_runtime(cpu); + + return idle; +} + +static int show_idle(struct seq_file *p, void *v) +{ + int i; + u64 idle; + + idle = 0; + + for_each_possible_cpu(i) { + + idle += get_idle_sum_exec_runtime(i); + + } + + seq_put_decimal_ull(p, "cpu ", nsec_to_clock_t(idle)); + seq_putc(p, '\n'); + + for_each_online_cpu(i) { + + idle = get_idle_sum_exec_runtime(i); + + seq_printf(p, "cpu%d", i); + seq_put_decimal_ull(p, " ", nsec_to_clock_t(idle)); + seq_putc(p, '\n'); + } + + return 0; +} + +static int idle_open(struct inode *inode, struct file *file) +{ + unsigned int size = 32 + 32 * num_online_cpus(); + + return single_open_size(file, show_idle, NULL, size); +} + +static struct proc_ops idle_procs_ops = { + .proc_open = idle_open, + .proc_read_iter = seq_read_iter, + .proc_lseek = seq_lseek, + .proc_release = single_release, +}; + +static int __init kernel_module_init(void) +{ + proc_create(PROC_NAME, 0, NULL, &idle_procs_ops); + return 0; +} + +fs_initcall(kernel_module_init); + +#endif /*CONFIG_PROC_IDLE*/ diff --git a/kernel/sched/cputime.c b/kernel/sched/cputime.c index 5a55d2300452..25218a8f822f 100644 --- a/kernel/sched/cputime.c +++ b/kernel/sched/cputime.c @@ -19,6 +19,8 @@ */ DEFINE_PER_CPU(struct irqtime, cpu_irqtime); +extern struct static_key_true proc_idle; + static int sched_clock_irqtime; void enable_sched_clock_irqtime(void) @@ -1078,3 +1080,35 @@ void kcpustat_cpu_fetch(struct kernel_cpustat *dst, int cpu) EXPORT_SYMBOL_GPL(kcpustat_cpu_fetch); #endif /* CONFIG_VIRT_CPU_ACCOUNTING_GEN */ + + +#ifdef CONFIG_PROC_IDLE + + +u64 cal_idle_sum_exec_runtime(int cpu) +{ + struct rq *rq = cpu_rq(cpu); + struct sched_entity *idle_se = &rq->idle->se; + u64 idle = idle_se->sum_exec_runtime; + + if (!static_branch_likely(&proc_idle)) + return 0ULL; + + if (rq->curr == rq->idle) { + u64 now = sched_clock(); + u64 delta_exec; + + delta_exec = now - idle_se->exec_start; + if (unlikely((s64)delta_exec <= 0)) + return idle; + + schedstat_set(idle_se->statistics.exec_max, + max(delta_exec, idle_se->statistics.exec_max)); + + idle += delta_exec; + } + + return idle; +} + +#endif /* CONFIG_PROC_IDLE */ diff --git a/kernel/sched/idle.c b/kernel/sched/idle.c index 36b545f17206..3714a1c0d57b 100644 --- a/kernel/sched/idle.c +++ b/kernel/sched/idle.c @@ -10,6 +10,8 @@ #include <trace/events/power.h> +DEFINE_STATIC_KEY_TRUE(proc_idle); + /* Linker adds these: start and end of __cpuidle functions */ extern char __cpuidle_text_start[], __cpuidle_text_end[]; @@ -424,8 +426,35 @@ static void check_preempt_curr_idle(struct rq *rq, struct task_struct *p, int fl static void put_prev_task_idle(struct rq *rq, struct task_struct *prev) { +#ifdef CONFIG_PROC_IDLE + if (!static_branch_likely(&proc_idle)) + return; + + struct sched_entity *idle_se = &rq->idle->se; + u64 now = sched_clock(); + u64 delta_exec; + + delta_exec = now - idle_se->exec_start; + if (unlikely((s64)delta_exec <= 0)) + return; + + schedstat_set(idle_se->statistics.exec_max, + max(delta_exec, idle_se->statistics.exec_max)); + + idle_se->sum_exec_runtime += delta_exec; +#endif } +#ifdef CONFIG_PROC_IDLE +static int __init init_proc_idle(char *str) +{ + if (!strcmp(str, "false")) + static_branch_disable(&proc_idle); + + return 1; +} +__setup("proc_idle=", init_proc_idle); +#endif static void set_next_task_idle(struct rq *rq, struct task_struct *next, bool first) { update_idle_core(rq); @@ -436,6 +465,15 @@ struct task_struct *pick_next_task_idle(struct rq *rq) { struct task_struct *next = rq->idle; +#ifdef CONFIG_PROC_IDLE + if (static_branch_likely(&proc_idle)) { + struct sched_entity *idle_se = &rq->idle->se; + u64 now = sched_clock(); + + idle_se->exec_start = now; + } +#endif + set_next_task_idle(rq, next, true); return next; -- 2.17.1

1 0

[PATCH openEuler-21.09 0/2] Improve the precisoin of accounuting CPU utilization rate
by Hongyu Li 03 Nov '21

03 Nov '21

The current way of calculating the CPU utilization rate is not accurate. The accounting system only works In the interval of two ticks. However, a process can give up the CPU before the tick ending. This can be fixed by counting the idel time via the scheduler. We can use the sum_exe_runtime of the idle process of each CPU to calculate the the CPU utilization rate. The idle time of each CPU is given in the /proc/stat2 file. An example of using this file is also attached. Hongyu Li (2): eulerfs: add the /proc/stat2 file tools: add a tool to calculate the CPU utilization rate fs/proc/Kconfig | 7 +++ fs/proc/Makefile | 1 + fs/proc/stat2.c | 91 ++++++++++++++++++++++++++++ kernel/sched/cputime.c | 34 +++++++++++ kernel/sched/idle.c | 38 ++++++++++++ tools/accounting/Makefile | 2 +- tools/accounting/cpu_rate_cal.c | 91 ++++++++++++++++++++++++++++ tools/accounting/cpu_rate_cal_readme | 15 +++++ 8 files changed, 278 insertions(+), 1 deletion(-) create mode 100644 fs/proc/stat2.c create mode 100644 tools/accounting/cpu_rate_cal.c create mode 100644 tools/accounting/cpu_rate_cal_readme -- 2.17.1

1 0

[PATCH OLK-5.10] SCSI:SPFC: fix compile error
by Yanling Song 03 Nov '21

03 Nov '21

Ramaxel inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4DBD7 CVE: NA Fix two compile errors: 1. Compile failed when O=xxx is specified; 2. Compile confliction when spfc and spnic are compiled in parallel by -j option because they share some .c files Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- drivers/scsi/spfc/Makefile | 30 +++++++++++++++--------------- drivers/scsi/spfc/sphw_api_cmd.c | 1 + drivers/scsi/spfc/sphw_cmdq.c | 1 + drivers/scsi/spfc/sphw_common.c | 1 + drivers/scsi/spfc/sphw_eqs.c | 1 + drivers/scsi/spfc/sphw_hw_cfg.c | 1 + drivers/scsi/spfc/sphw_hw_comm.c | 1 + drivers/scsi/spfc/sphw_hwdev.c | 1 + drivers/scsi/spfc/sphw_hwif.c | 1 + drivers/scsi/spfc/sphw_mbox.c | 1 + drivers/scsi/spfc/sphw_mgmt.c | 1 + drivers/scsi/spfc/sphw_prof_adap.c | 1 + drivers/scsi/spfc/sphw_wq.c | 1 + 13 files changed, 27 insertions(+), 15 deletions(-) create mode 120000 drivers/scsi/spfc/sphw_api_cmd.c create mode 120000 drivers/scsi/spfc/sphw_cmdq.c create mode 120000 drivers/scsi/spfc/sphw_common.c create mode 120000 drivers/scsi/spfc/sphw_eqs.c create mode 120000 drivers/scsi/spfc/sphw_hw_cfg.c create mode 120000 drivers/scsi/spfc/sphw_hw_comm.c create mode 120000 drivers/scsi/spfc/sphw_hwdev.c create mode 120000 drivers/scsi/spfc/sphw_hwif.c create mode 120000 drivers/scsi/spfc/sphw_mbox.c create mode 120000 drivers/scsi/spfc/sphw_mgmt.c create mode 120000 drivers/scsi/spfc/sphw_prof_adap.c create mode 120000 drivers/scsi/spfc/sphw_wq.c diff --git a/drivers/scsi/spfc/Makefile b/drivers/scsi/spfc/Makefile index 02fe0213e048..849b730ac733 100644 --- a/drivers/scsi/spfc/Makefile +++ b/drivers/scsi/spfc/Makefile @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPFC) += spfc.o -subdir-ccflags-y += -I$(src)/../../net/ethernet/ramaxel/spnic/hw -subdir-ccflags-y += -I$(src)/hw -subdir-ccflags-y += -I$(src)/common +subdir-ccflags-y += -I$(srctree)/$(src)/../../net/ethernet/ramaxel/spnic/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/common spfc-objs := common/unf_init.o \ common/unf_event.o \ @@ -33,15 +33,15 @@ spfc-objs := common/unf_init.o \ hw/spfc_cqm_bitmap_table.o \ hw/spfc_cqm_main.o \ hw/spfc_cqm_object.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_common.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_wq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.o \ - ../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.o + sphw_hwdev.o \ + sphw_hw_cfg.o \ + sphw_hw_comm.o \ + sphw_prof_adap.o \ + sphw_common.o \ + sphw_hwif.o \ + sphw_wq.o \ + sphw_cmdq.o \ + sphw_eqs.o \ + sphw_mbox.o \ + sphw_mgmt.o \ + sphw_api_cmd.o diff --git a/drivers/scsi/spfc/sphw_api_cmd.c b/drivers/scsi/spfc/sphw_api_cmd.c new file mode 120000 index 000000000000..27c7c0770fa3 --- /dev/null +++ b/drivers/scsi/spfc/sphw_api_cmd.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_api_cmd.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_cmdq.c b/drivers/scsi/spfc/sphw_cmdq.c new file mode 120000 index 000000000000..5ac779ba274b --- /dev/null +++ b/drivers/scsi/spfc/sphw_cmdq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_cmdq.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_common.c b/drivers/scsi/spfc/sphw_common.c new file mode 120000 index 000000000000..a1a30a4840e1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_common.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_common.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_eqs.c b/drivers/scsi/spfc/sphw_eqs.c new file mode 120000 index 000000000000..74430dcb9dc5 --- /dev/null +++ b/drivers/scsi/spfc/sphw_eqs.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_eqs.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_cfg.c b/drivers/scsi/spfc/sphw_hw_cfg.c new file mode 120000 index 000000000000..4f43d68624c1 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_cfg.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_cfg.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hw_comm.c b/drivers/scsi/spfc/sphw_hw_comm.c new file mode 120000 index 000000000000..c943b3b2933a --- /dev/null +++ b/drivers/scsi/spfc/sphw_hw_comm.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hw_comm.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwdev.c b/drivers/scsi/spfc/sphw_hwdev.c new file mode 120000 index 000000000000..b7279f17eaa2 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwdev.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwdev.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_hwif.c b/drivers/scsi/spfc/sphw_hwif.c new file mode 120000 index 000000000000..d40ef71f9033 --- /dev/null +++ b/drivers/scsi/spfc/sphw_hwif.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_hwif.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mbox.c b/drivers/scsi/spfc/sphw_mbox.c new file mode 120000 index 000000000000..1b00fe7289cc --- /dev/null +++ b/drivers/scsi/spfc/sphw_mbox.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mbox.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_mgmt.c b/drivers/scsi/spfc/sphw_mgmt.c new file mode 120000 index 000000000000..fd18a73e9d3a --- /dev/null +++ b/drivers/scsi/spfc/sphw_mgmt.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_mgmt.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_prof_adap.c b/drivers/scsi/spfc/sphw_prof_adap.c new file mode 120000 index 000000000000..fbc7db05dd27 --- /dev/null +++ b/drivers/scsi/spfc/sphw_prof_adap.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_prof_adap.c \ No newline at end of file diff --git a/drivers/scsi/spfc/sphw_wq.c b/drivers/scsi/spfc/sphw_wq.c new file mode 120000 index 000000000000..cdfcb3a610c0 --- /dev/null +++ b/drivers/scsi/spfc/sphw_wq.c @@ -0,0 +1 @@ +../../net/ethernet/ramaxel/spnic/hw/sphw_wq.c \ No newline at end of file -- 2.27.0

1 0

[PATCH openEuler-1.0-LTS] nbd: add sanity check for first_minor
by Yang Yingliang 02 Nov '21

02 Nov '21

From: Yu Kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: 182920, https://gitee.com/openeuler/kernel/issues/I4GLNX CVE: NA --------------------------- When user pass 0x100000 as index, nbd will end up create sysfs dir "/sys/block/43:0": nbd_dev_add disk->first_minor = index << part_shift -> default part_shift is 5, 0x100000 << 5 = 0x2000000 device_add_disk blk_alloc_devt MKDEV(disk->major, disk->first_minor + part->partno) -> (0x2b << 20) | (0x2000000) = 0x2b00000 register_disk device_add device_create_sys_dev_entry format_dev_t MAJOR(devt) -> 0x2b00000 >> 20 = 0x2b MINOR(devt) -> 0x2b00000 & 0xfffff = 0 sysfs_create_link -> /sys/block/43:0 If nbd created device with index 0 aready, then sysfs will compalin about dumplicated creation. On the other hand, the similar dumplicated creation will happen if "index << part_shift" over flow to a value that is less than MINORMASK. Thus fix the problem by adding sanity check for first_minor. Fixes: b0d9111a2d53 ("nbd: use an idr to keep track of nbd devices") Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/nbd.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 2a3794801704a..33a52be762d24 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -1755,7 +1755,18 @@ static int nbd_dev_add(int index) refcount_set(&nbd->refs, 1); INIT_LIST_HEAD(&nbd->list); disk->major = NBD_MAJOR; + + /* + * Too big index can cause duplicate creation of sysfs files/links, + * because MKDEV() expect that the max first minor is MINORMASK, or + * index << part_shift can overflow. + */ disk->first_minor = index << part_shift; + if (disk->first_minor < index || disk->first_minor > MINORMASK) { + err = -EINVAL; + goto out_free_tags; + } + disk->fops = &nbd_fops; disk->private_data = nbd; sprintf(disk->disk_name, "nbd%d", index); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] perf: hisi: Fix compile error if defined MODULE
by Yang Yingliang 02 Nov '21

02 Nov '21

From: Lijun Fang <fanglijun3(a)huawei.com> ascend inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4D4WR CVE: NA --------------------------- Fix compile error if defined MODULE. Signed-off-by: Lijun Fang <fanglijun3(a)huawei.com> Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c b/drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c index 8f8b211788e0f..ca395252ccc3d 100644 --- a/drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c +++ b/drivers/perf/hisilicon/hisi_uncore_lpddrc_pmu.c @@ -241,7 +241,7 @@ static int hisi_lpddrc_pmu_init_irq(struct hisi_pmu *lpddrc_pmu, static const struct of_device_id lpddrc_of_match[] = { { .compatible = "hisilicon,lpddrc-pmu", }, {}, -} +}; MODULE_DEVICE_TABLE(of, lpddrc_of_match); static int hisi_lpddrc_pmu_init_data(struct platform_device *pdev, -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] nfc: nci: fix the UAF of rf_conn_info object
by Yang Yingliang 02 Nov '21

02 Nov '21

From: Lin Ma <linma(a)zju.edu.cn> mainline inclusion from mainline-v5.15-rc6 commit 1b1499a817c90fd1ce9453a2c98d2a01cca0e775 category: bugfix bugzilla: NA CVE: CVE-2021-3760 ------------------------------------------------- The nci_core_conn_close_rsp_packet() function will release the conn_info with given conn_id. However, it needs to set the rf_conn_info to NULL to prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger the UAF. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Signed-off-by: Lin Ma <linma(a)zju.edu.cn> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski(a)canonical.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/nfc/nci/rsp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/nfc/nci/rsp.c b/net/nfc/nci/rsp.c index e3bbf1937d0e9..7681f89dc312b 100644 --- a/net/nfc/nci/rsp.c +++ b/net/nfc/nci/rsp.c @@ -289,6 +289,8 @@ static void nci_core_conn_close_rsp_packet(struct nci_dev *ndev, ndev->cur_conn_id); if (conn_info) { list_del(&conn_info->list); + if (conn_info == ndev->rf_conn_info) + ndev->rf_conn_info = NULL; devm_kfree(&ndev->nfc_dev->dev, conn_info); } } -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/4] ipv4: use siphash instead of Jenkins in fnhe_hashfun()
by Yang Yingliang 02 Nov '21

02 Nov '21

From: Eric Dumazet <edumazet(a)google.com> mainline inclusion from mainline-v5.14 commit 6457378fe796815c973f631a1904e147d6ee33b1 category: bugfix bugzilla: NA CVE: CVE-2021-20322 ------------------------------------------------- A group of security researchers brought to our attention the weakness of hash function used in fnhe_hashfun(). Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Also remove the inline keyword, this really is distracting. Fixes: d546c621542d ("ipv4: harden fnhe_hashfun()") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reported-by: Keyu Man <kman001(a)ucr.edu> Cc: Willy Tarreau <w(a)1wt.eu> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Xu Jia <xujia39(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- net/ipv4/route.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 958df3427c34f..dd43e798194ab 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -614,14 +614,14 @@ static struct fib_nh_exception *fnhe_oldest(struct fnhe_hash_bucket *hash) return oldest; } -static inline u32 fnhe_hashfun(__be32 daddr) +static u32 fnhe_hashfun(__be32 daddr) { - static u32 fnhe_hashrnd __read_mostly; - u32 hval; + static siphash_key_t fnhe_hash_key __read_mostly; + u64 hval; - net_get_random_once(&fnhe_hashrnd, sizeof(fnhe_hashrnd)); - hval = jhash_1word((__force u32) daddr, fnhe_hashrnd); - return hash_32(hval, FNHE_HASH_SHIFT); + net_get_random_once(&fnhe_hash_key, sizeof(fnhe_hash_key)); + hval = siphash_1u32((__force u32) daddr, &fnhe_hash_key); + return hash_64(hval, FNHE_HASH_SHIFT); } static void fill_route_from_fnhe(struct rtable *rt, struct fib_nh_exception *fnhe) -- 2.25.1

1 3

[PATCH openEuler-1.0-LTS] README: README optimize
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Laibin Qiu <qiulaibin(a)huawei.com> hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- README | 291 ++++++++++++++++++++++++++++++--------------------------- 1 file changed, 155 insertions(+), 136 deletions(-) diff --git a/README b/README index 46c9ea3522c1c..21b2e09d62db2 100644 --- a/README +++ b/README @@ -1,174 +1,188 @@ -Contributions to openEuler kernel project -========================================= +# How to Contribute +------- -Sign CLA --------- +- [How to Contribute](#How to Contribute) -Before submitting any Contributions to openEuler, you have to sign CLA. + \- [Sign the CLA](#Sign the CLA) -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html + \- [Steps of submitting patches](#Steps of submitting patches) -Steps of submitting patches ---------------------------- + \- [Use the unified patch format](#Use the unified patch format) -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. + \- [Define the patch format](#Define the patch format) - Using scripts/checkpatch.pl to make sure there's no coding style issue. + \- [Examples](#Examples) - And make sure your patch follow unified openEuler patch format describe - below. + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: +- [Linux kernel](#Linux kernel) - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all +### Sign the CLA - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. +------- - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email +Before making any contributions to openEuler, sign the CLA first. -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 +### Steps of submitting patches +------- - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching +**Step 1** Compile and test your patches. -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. +**Step 2** Generate patches. -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: +In addition, ensure that your patches comply with the unified openEuler patch format described below. - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +**Step 3** Send your patches to the openEuler mailing list. - By making a contribution to this project, I certify that: +To do so, run the following command: - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. - then you just add a line saying: +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. - Signed-off-by: Random J Developer <random(a)developer.example.org> + `git format-patch --subject-prefix="PATCH v2" -1` - using your real name (sorry, no pseudonyms or anonymous contributions.) +Subject examples: -Use unified patch format ------------------------- + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- Reasons: -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. + We definitely will upgrade our openEuler kernel in someday, so strict patch management -3. easy for script parsing - Keyword highlighting is necessary for script parsing. + will alleviate the pain to migrate patches during big upgrades. -Patch format definition ------------------------ +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". -[M] stands for "mandatory" -[O] stands for "option" $category can be: bug preparation, bugfix, perf, feature, doc, other... -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) +If category is feature, we need to add a feature name as below: -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id +```cpp +category: feature +feature: YYY (the feature name) +``` -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): -The detail information is very useful for porting patch to another kenrel branch. +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` -Example for mainline patch: +Additional changelog should include at least one of the following: - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] +1. Why we should apply this patch - additional changelog [O] +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: - -------------------------------- +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] - original changelog +additional changelog [O] - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +-------------------------------- - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` -Examples --------- +### Examples +------- +```cpp mainline inclusion from mainline-4.10 commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 category: bugfix bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . +CVE: N/A -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP ------------------------------------------------- @@ -177,33 +191,38 @@ original changelog <original S-O-B> Signed-off-by: Zhang San <zhangsan(a)huawei.com> Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. -Email Client - Thunderbird Settings ------------------------------------ + 2.2 Editor settings -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. + **Tools > Options> Advanced > Config editor** -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. Linux kernel ============ -- 2.25.1

1 0

[PATCH OLK-5.10] Net:NIC:SPNIC:Fix compile error when O= is specififed
by Yanling Song 01 Nov '21

01 Nov '21

Ramaxel inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4CBDP CVE: NA Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- drivers/net/ethernet/ramaxel/spnic/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/ramaxel/spnic/Makefile b/drivers/net/ethernet/ramaxel/spnic/Makefile index f86ccff374f6..207e1d9c431a 100644 --- a/drivers/net/ethernet/ramaxel/spnic/Makefile +++ b/drivers/net/ethernet/ramaxel/spnic/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPNIC) += spnic.o -subdir-ccflags-y += -I$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw spnic-objs := hw/sphw_common.o \ hw/sphw_hwif.o \ -- 2.27.0

2 1

[PATCH OLK-5.10] SCSI:SPFC: fix compile error when O= is specified
by Yanling Song 01 Nov '21

01 Nov '21

Ramaxel inclusion category: feature bugzilla: https://gitee.com/openeuler/kernel/issues/I4DBD7 CVE: NA Signed-off-by: Yanling Song <songyl(a)ramaxel.com> --- drivers/scsi/spfc/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/spfc/Makefile b/drivers/scsi/spfc/Makefile index 02fe0213e048..205eadc35318 100644 --- a/drivers/scsi/spfc/Makefile +++ b/drivers/scsi/spfc/Makefile @@ -1,9 +1,9 @@ # SPDX-License-Identifier: GPL-2.0-only obj-$(CONFIG_SPFC) += spfc.o -subdir-ccflags-y += -I$(src)/../../net/ethernet/ramaxel/spnic/hw -subdir-ccflags-y += -I$(src)/hw -subdir-ccflags-y += -I$(src)/common +subdir-ccflags-y += -I$(srctree)/$(src)/../../net/ethernet/ramaxel/spnic/hw +subdir-ccflags-y += -I$(srctree)/$(src)/hw +subdir-ccflags-y += -I$(srctree)/$(src)/common spfc-objs := common/unf_init.o \ common/unf_event.o \ -- 2.27.0

2 1

[PATCH openEuler-1.0-LTS V4] README: README optimize
by Laibin Qiu 01 Nov '21

01 Nov '21

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> --- README | 291 ++++++++++++++++++++++++++++++--------------------------- 1 file changed, 155 insertions(+), 136 deletions(-) diff --git a/README b/README index 46c9ea352..21b2e09d6 100644 --- a/README +++ b/README @@ -1,174 +1,188 @@ -Contributions to openEuler kernel project -========================================= +# How to Contribute +------- -Sign CLA --------- +- [How to Contribute](#How to Contribute) -Before submitting any Contributions to openEuler, you have to sign CLA. + \- [Sign the CLA](#Sign the CLA) -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html + \- [Steps of submitting patches](#Steps of submitting patches) -Steps of submitting patches ---------------------------- + \- [Use the unified patch format](#Use the unified patch format) -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. + \- [Define the patch format](#Define the patch format) - Using scripts/checkpatch.pl to make sure there's no coding style issue. + \- [Examples](#Examples) - And make sure your patch follow unified openEuler patch format describe - below. + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: +- [Linux kernel](#Linux kernel) - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all +### Sign the CLA - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. +------- - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email +Before making any contributions to openEuler, sign the CLA first. -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 +### Steps of submitting patches +------- - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching +**Step 1** Compile and test your patches. -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. +**Step 2** Generate patches. -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: +In addition, ensure that your patches comply with the unified openEuler patch format described below. - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +**Step 3** Send your patches to the openEuler mailing list. - By making a contribution to this project, I certify that: +To do so, run the following command: - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. - then you just add a line saying: +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. - Signed-off-by: Random J Developer <random(a)developer.example.org> + `git format-patch --subject-prefix="PATCH v2" -1` - using your real name (sorry, no pseudonyms or anonymous contributions.) +Subject examples: -Use unified patch format ------------------------- + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- Reasons: -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. + We definitely will upgrade our openEuler kernel in someday, so strict patch management -3. easy for script parsing - Keyword highlighting is necessary for script parsing. + will alleviate the pain to migrate patches during big upgrades. -Patch format definition ------------------------ +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". -[M] stands for "mandatory" -[O] stands for "option" $category can be: bug preparation, bugfix, perf, feature, doc, other... -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) +If category is feature, we need to add a feature name as below: -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id +```cpp +category: feature +feature: YYY (the feature name) +``` -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): -The detail information is very useful for porting patch to another kenrel branch. +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` -Example for mainline patch: +Additional changelog should include at least one of the following: - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] +1. Why we should apply this patch - additional changelog [O] +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: - -------------------------------- +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] - original changelog +additional changelog [O] - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +-------------------------------- - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` -Examples --------- +### Examples +------- +```cpp mainline inclusion from mainline-4.10 commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 category: bugfix bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . +CVE: N/A -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP ------------------------------------------------- @@ -177,33 +191,38 @@ original changelog <original S-O-B> Signed-off-by: Zhang San <zhangsan(a)huawei.com> Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. -Email Client - Thunderbird Settings ------------------------------------ + 2.2 Editor settings -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. + **Tools > Options> Advanced > Config editor** -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. Linux kernel ============ -- 2.22.0

1 0

[PATCH openEuler-1.0-LTS] PM: hibernate: Get block device exclusively in swsusp_check()
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v5.16 commit 39fbef4b0f77f9c89c8f014749ca533643a37c9f category: bugfix bugzilla: 182871 CVE: NA ----------------------------------------------- The following kernel crash can be triggered: [ 89.266592] ------------[ cut here ]------------ [ 89.267427] kernel BUG at fs/buffer.c:3020! [ 89.268264] invalid opcode: 0000 [#1] SMP KASAN PTI [ 89.269116] CPU: 7 PID: 1750 Comm: kmmpd-loop0 Not tainted 5.10.0-862.14.0.6.x86_64-08610-gc932cda3cef4-dirty #20 [ 89.273169] RIP: 0010:submit_bh_wbc.isra.0+0x538/0x6d0 [ 89.277157] RSP: 0018:ffff888105ddfd08 EFLAGS: 00010246 [ 89.278093] RAX: 0000000000000005 RBX: ffff888124231498 RCX: ffffffffb2772612 [ 89.279332] RDX: 1ffff11024846293 RSI: 0000000000000008 RDI: ffff888124231498 [ 89.280591] RBP: ffff8881248cc000 R08: 0000000000000001 R09: ffffed1024846294 [ 89.281851] R10: ffff88812423149f R11: ffffed1024846293 R12: 0000000000003800 [ 89.283095] R13: 0000000000000001 R14: 0000000000000000 R15: ffff8881161f7000 [ 89.284342] FS: 0000000000000000(0000) GS:ffff88839b5c0000(0000) knlGS:0000000000000000 [ 89.285711] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.286701] CR2: 00007f166ebc01a0 CR3: 0000000435c0e000 CR4: 00000000000006e0 [ 89.287919] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 89.289138] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 89.290368] Call Trace: [ 89.290842] write_mmp_block+0x2ca/0x510 [ 89.292218] kmmpd+0x433/0x9a0 [ 89.294902] kthread+0x2dd/0x3e0 [ 89.296268] ret_from_fork+0x22/0x30 [ 89.296906] Modules linked in: by running the following commands: 1. mkfs.ext4 -O mmp /dev/sda -b 1024 2. mount /dev/sda /home/test 3. echo "/dev/sda" > /sys/power/resume That happens because swsusp_check() calls set_blocksize() on the target partition which confuses the file system: Thread1 Thread2 mount /dev/sda /home/test get s_mmp_bh --> has mapped flag start kmmpd thread echo "/dev/sda" > /sys/power/resume resume_store software_resume swsusp_check set_blocksize truncate_inode_pages_range truncate_cleanup_page block_invalidatepage discard_buffer --> clean mapped flag write_mmp_block submit_bh submit_bh_wbc BUG_ON(!buffer_mapped(bh)) To address this issue, modify swsusp_check() to open the target block device with exclusive access. Signed-off-by: Ye Bin <yebin10(a)huawei.com> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/power/swap.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/kernel/power/swap.c b/kernel/power/swap.c index d7f6c1a288d33..4fde37fce4ea4 100644 --- a/kernel/power/swap.c +++ b/kernel/power/swap.c @@ -1512,9 +1512,10 @@ int swsusp_read(unsigned int *flags_p) int swsusp_check(void) { int error; + void *holder; hib_resume_bdev = blkdev_get_by_dev(swsusp_resume_device, - FMODE_READ, NULL); + FMODE_READ | FMODE_EXCL, &holder); if (!IS_ERR(hib_resume_bdev)) { set_blocksize(hib_resume_bdev, PAGE_SIZE); clear_page(swsusp_header); @@ -1536,7 +1537,7 @@ int swsusp_check(void) put: if (error) - blkdev_put(hib_resume_bdev, FMODE_READ); + blkdev_put(hib_resume_bdev, FMODE_READ | FMODE_EXCL); else pr_debug("Image signature found, resuming\n"); } else { -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS V3] README: README optimize
by Laibin Qiu 01 Nov '21

01 Nov '21

hulk inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I4FS3G?from=project-issue CVE: NA --------------------------- There are some language problems in the README file, and MarkDown fromat syntax is not effective, and it needs to be adjusted. Signed-off-by: suqin <suqin2(a)huawei.com> Signed-off-by: Laibin Qiu <qiulaibin(a)huawei.com> Reviewed-by: Cheng Jian <cj.chengjian(a)huawei.com> --- README | 311 +++++++++++++++++++++++++++++---------------------------- 1 file changed, 161 insertions(+), 150 deletions(-) diff --git a/README b/README index 46c9ea352..3374c4726 100644 --- a/README +++ b/README @@ -1,174 +1,188 @@ -Contributions to openEuler kernel project -========================================= +# How to Contribute +------- -Sign CLA --------- +- [How to Contribute](#How to Contribute) -Before submitting any Contributions to openEuler, you have to sign CLA. + \- [Sign the CLA](#Sign the CLA) -See: - https://openeuler.org/zh/cla.html - https://openeuler.org/en/cla.html + \- [Steps of submitting patches](#Steps of submitting patches) -Steps of submitting patches ---------------------------- + \- [Use the unified patch format](#Use the unified patch format) -1. Compile and test your patches successfully. -2. Generate patches - Your patches should be based on top of latest openEuler branch, and should - use git-format-patch to generate patches, and if it's a patchset, it's - better to use --cover-letter option to describe what the patchset does. + \- [Define the patch format](#Define the patch format) - Using scripts/checkpatch.pl to make sure there's no coding style issue. + \- [Examples](#Examples) - And make sure your patch follow unified openEuler patch format describe - below. + \- [Email client - Thunderbird settings](#Email client - Thunderbird settings) -3. Send patch to openEuler mailing list - Use this command to send patches to openEuler mailing list: +- [Linux kernel](#Linux kernel) - git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all +### Sign the CLA - *NOTE*: that you must add --suppress-cc=all if you use git send-email, - otherwise the email will be cced to the people in upstream community and mailing - lists. +------- - *See*: How to send patches using git-send-email - https://git-scm.com/docs/git-send-email +Before making any contributions to openEuler, sign the CLA first. -4. Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions - to send out. +Address: [https://openeuler.org/en/cla.html](https://openeuler.org/en/cla.html) - Use --subject-prefix="PATCH v2" option to add v2 tag for patchset. - git format-patch --subject-prefix="PATCH v2" -1 +### Steps of submitting patches +------- - Subject examples: - Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings - Subject: [PATCH v3] ext2: improve scalability of bitmap searching +**Step 1** Compile and test your patches. -5. Upstream your kernel patch to kernel community is strongly recommended. - openEuler will sync up with kernel master timely. +**Step 2** Generate patches. -6. Sign your work - the Developer’s Certificate of Origin - As the same of upstream kernel community, you also need to sign your patch. +Your patches should be generated based on the latest openEuler branch using git-format-patch. If your patches are in a patchset, it is better to use the **--cover-letter** option to describe what the patchset does. - See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html +Use **scripts/checkpatch.pl** to ensure that no coding style issue exists. - The sign-off is a simple line at the end of the explanation for the patch, - which certifies that you wrote it or otherwise have the right to pass it - on as an open-source patch. The rules are pretty simple: if you can certify - the below: +In addition, ensure that your patches comply with the unified openEuler patch format described below. - Developer’s Certificate of Origin 1.1 - ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +**Step 3** Send your patches to the openEuler mailing list. - By making a contribution to this project, I certify that: +To do so, run the following command: - (a) The contribution was created in whole or in part by me and I have - the right to submit it under the open source license indicated in - the file; or + `git send-email *.patch -to="kernel(a)openeuler.org" --suppress-cc=all` - (b The contribution is based upon previous work that, to the best of - my knowledge, is covered under an appropriate open source license - and I have the right under that license to submit that work with - modifications, whether created in whole or in part by me, under - the same open source license (unless I am permitted to submit under - a different license), as indicated in the file; or +*NOTE*: Add **--suppress-cc=all** if you use git-send-email; otherwise, the email will be copied to all people in the upstream community and mailing lists. - (c) The contribution was provided directly to me by some other person - who certified (a), (b) or (c) and I have not modified it. +For details about how to send patches using git-send-email, see [https://git-scm.com/docs/git-send-email](https://git-scm.com/docs/git-send-…. - (d) I understand and agree that this project and the contribution are - public and that a record of the contribution (including all personal - information I submit with it, including my sign-off) is maintained - indefinitely and may be redistributed consistent with this project - or the open source license(s) involved. +**Step 4** Mark "v1, v2, v3 ..." in your patch subject if you have multiple versions to send out. - then you just add a line saying: +Use the **--subject-prefix="PATCH v2"** option to add the v2 tag to the patchset. - Signed-off-by: Random J Developer <random(a)developer.example.org> + `git format-patch --subject-prefix="PATCH v2" -1` - using your real name (sorry, no pseudonyms or anonymous contributions.) +Subject examples: -Use unified patch format ------------------------- + Subject: [PATCH v2 01/27] fork: fix some -Wmissing-prototypes warnings + + Subject: [PATCH v3] ext2: improve scalability of bitmap searching + +**Step 5** Upstream your kernel patches to the kernel community (recommended). openEuler will synchronize with the kernel master in a timely manner. + +**Step 6** Sign your work - the Developer’s Certificate of Origin. + + Similar to the upstream kernel community, you also need to sign your patch. + + For details, see [https://www.kernel.org/doc/html/latest/process/submitting-patches.html](htt…. + + The sign-off is a simple line at the end of the explanation of the patch, which certifies that you wrote it or otherwise have the right to pass it on as an open source patch. The rules are pretty simple. You can certify as below: + + Developer’s Certificate of Origin 1.1 + + ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + + By making a contribution to this project, I certify that: + + (a) The contribution was created in whole or in part by me and I have the right to submit it under the open source license indicated in the file; + + (b) The contribution is based upon previous work that, to the best of my knowledge, is covered under an appropriate open source license and I have the right under that license to submit that work with modifications, whether created in whole or in part by me, under the same open source license (unless I am permitted to submit under a different license), as indicated in the file; + + (c) The contribution was provided directly to me by some other person who certified (a), (b) or (c) and I have not modified it. + + (d) I understand and agree that this project and the contribution are public and that a record of the contribution (including all personal information I submit with it, including my sign-off) is maintained indefinitely and may be redistributed consistent with this project or the open source license(s) involved. + +Then you add a line saying: + +Signed-off-by: Random J Developer <random(a)developer.example.org> + +Use your real name (sorry, no pseudonyms or anonymous contributions). + +### Use the unified patch format +------- Reasons: -1. long term maintainability - openEuler will merge massive patches. If all patches are merged by casual - changelog format without a unified format, the git log will be messy, and - then it's hard to figure out the original patch. +1. Long term maintainability + + openEuler will merge massive patches. If all patches are merged by casual + + changelog formats without a unified format, the git logs will be messy, and + + then it is hard to figure out the original patches. + +2. Kernel upgrade -2. kernel upgrade - We definitely will upgrade our openEuler kernel in someday, using strict - patch management will alleviate the pain to migrate patches during big upgrade. + We definitely will upgrade our openEuler kernel in someday, so strict patch management -3. easy for script parsing - Keyword highlighting is necessary for script parsing. + will alleviate the pain to migrate patches during big upgrades. -Patch format definition ------------------------ +3. Easy for script parsing + + Keyword highlighting is necessary for script parsing. + +### Define the patch format +------- + +[M] stands for "mandatory". + +[O] stands for "option". -[M] stands for "mandatory" -[O] stands for "option" $category can be: bug preparation, bugfix, perf, feature, doc, other... -If category is feature, then we also need to add feature name like below: - category: feature - feature: YYY (the feature name) +If category is feature, we need to add a feature name as below: -If the patch is related to CVE or bugzilla, then we need add the corresponding -tag like below (In general, it should include at least one of the following): - CVE: $cve-id - bugzilla: $bug-id +```cpp +category: feature +feature: YYY (the feature name) +``` -Additional changelog should include at least one of the flollwing: - 1) Why we should apply this patch - 2) What real problem in product does this patch resolved - 3) How could we reproduce this bug or how to test - 4) Other useful information for help to understand this patch or problem +If the patch is related to CVE or bugzilla, we need to add the corresponding tag as below (In general, it should include at least one of the following): -The detail information is very useful for porting patch to another kenrel branch. +```cpp +CVE: $cve-id +bugzilla: $bug-id +``` -Example for mainline patch: +Additional changelog should include at least one of the following: - mainline inclusion [M] - from $mainline-version [M] - commit $id [M] - category: $category [M] - bugzilla: $bug-id [O] - CVE: $cve-id [O] +1. Why we should apply this patch - additional changelog [O] +2. What real problems in the product does this patch resolved + +3. How could we reproduce this bug or how to test + +4. Other useful information for help to understand this patch or problem + +The detailed information is very useful for migrating a patch to another kernel branch. + +Example for mainline patch: - -------------------------------- +```cpp +mainline inclusion [M] +from $mainline-version [M] +commit $id [M] +category: $category [M] +bugzilla: $bug-id [O] +CVE: $cve-id [O] - original changelog +additional changelog [O] - Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +-------------------------------- - ($mainline-version could be mainline-3.5, mainline-3.6, etc...) +original changelog +Signed-off-by: $yourname <$yourname(a)huawei.com> [M] +($mainline-version could be mainline-3.5, mainline-3.6, etc...) +``` -Examples --------- +### Examples +------- +```cpp mainline inclusion from mainline-4.10 commit 0becc0ae5b42828785b589f686725ff5bc3b9b25 category: bugfix bugzilla: 3004 -CVE: NA - -The patch fixes a BUG_ON in the product: injecting single bit ECC error -to memory before system boot use hardware inject tools, which cause a -large amount of CMCI during system booting . +CVE: N/A -[ 1.146580] mce: [Hardware Error]: Machine check events logged -[ 1.152908] ------------[ cut here ]------------ -[ 1.157751] kernel BUG at kernel/timer.c:951! -[ 1.162321] invalid opcode: 0000 [#1] SMP -... +The patch fixes a BUG_ON in the product: Injecting a single bit ECC error to the memory before system boot using hardware inject tools will cause a large amount of CMCI during system booting . +[ 1.146580] mce: [Hardware Error]: Machine check events logged +[ 1.152908] ------------[ cut here ]------------ +[ 1.157751] kernel BUG at kernel/timer.c:951! +[ 1.162321] invalid opcode: 0000 [#1] SMP ------------------------------------------------- @@ -177,50 +191,47 @@ original changelog <original S-O-B> Signed-off-by: Zhang San <zhangsan(a)huawei.com> Tested-by: Li Si <lisi(a)huawei.com> +``` + +### Email client - Thunderbird settings +------- + +If you are a new developer in the kernel community, it is highly recommended that you use the Thunderbird mail client. + +1. Thunderbird Installation + + Obtain the English version of Thunderbird from [http://www.mozilla.org/]( http://www.mozilla.org/) and install it on your system. + + Download URL: https://www.thunderbird.net/en-US/thunderbird/all/ + +2. Settings + + 2.1 Use the plain text format instead of the HTML format. + + Choose **Options > Account Settings > Composition & Addressing**, and do **NOT** select Compose message in HTML format. -Email Client - Thunderbird Settings ------------------------------------ + 2.2 Editor settings -If you are newly developer in the kernel community, it is highly recommended -to use thunderbird mail client. + **Tools > Options> Advanced > Config editor** -1. Thunderbird Installation - Get English version Thunderbird from http://www.mozilla.org/ and install - it on your system。 + \- To bring up the Thunderbird's registry editor, set **mailnews.send_plaintext_flowed** to **false**. - Download url: https://www.thunderbird.net/en-US/thunderbird/all/ + \- Disable HTML Format: Set **mail.identity.id1.compose_html** to **false**. -2. Settings - 2.1 Use plain text format instead of HTML format - Options -> Account Settings -> Composition & Addressing, do *NOT* select - "Compose message in HTML format". + \- Enable UTF-8: Set **prefs.converted-to-utf8** to **true**. - 2.2 Editor Settings - Tools->Options->Advanced->Config editor. + \- View messages in UTF-8: Set **mailnews.view_default_charset** to **UTF-8**. - - To bring up the thunderbird's registry editor, and set: - "mailnews.send_plaintext_flowed" to "false". - - Disable HTML Format: Set "mail.identity.id1.compose_html" to "false". - - Enable UTF8: Set "prefs.converted-to-utf8" to "true". - - View message in UTF-8: Set "mailnews.view_default_charset" to "UTF-8". - - Set mailnews.wraplength to 9999 for avoiding auto-wrap + \- Set **mailnews.wraplength** to **9999** to avoid auto-wrap. -Linux kernel -============ +# Linux kernel +------- -There are several guides for kernel developers and users. These guides can -be rendered in a number of formats, like HTML and PDF. Please read -Documentation/admin-guide/README.rst first. +There are several guides for kernel developers and users, which can be rendered in a number of formats, like HTML and PDF. You can read **Documentation/admin-guide/README.rst** first. -In order to build the documentation, use ``make htmldocs`` or -``make pdfdocs``. The formatted documentation can also be read online at: +In order to build the documentation, use **make htmldocs** or **make pdfdocs**. The formatted documentation can also be read online at: https://www.kernel.org/doc/html/latest/ - https://www.kernel.org/doc/html/latest/ +There are various text files in the Documentation/ subdirectory, several of which use the Restructured Text markup notation. See Documentation/00-INDEX for a list of what is contained in each file. -There are various text files in the Documentation/ subdirectory, -several of them using the Restructured Text markup notation. -See Documentation/00-INDEX for a list of what is contained in each file. +Read the **Documentation/process/changes.rst** file, as it contains the requirements for building and running the kernel, and information about the problems that may be caused by upgrading your kernel. -Please read the Documentation/process/changes.rst file, as it contains the -requirements for building and running the kernel, and information about -the problems which may result by upgrading your kernel. -- 2.22.0

1 0

[PATCH openEuler-1.0-LTS] blk-cgroup: synchronize blkg creation against policy deactivation
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Yu Kuai <yukuai3(a)huawei.com> mainline inclusion from mainline-v5.16 commit 0c9d338c8443b06da8e8d3bfce824c5ea6d3488f category: bugfix bugzilla: 182378 CVE: NA --------------------------- Our test reports a null pointer dereference: [ 168.534653] ================================================================== [ 168.535614] Disabling lock debugging due to kernel taint [ 168.536346] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 168.537274] #PF: supervisor read access in kernel mode [ 168.537964] #PF: error_code(0x0000) - not-present page [ 168.538667] PGD 0 P4D 0 [ 168.539025] Oops: 0000 [#1] PREEMPT SMP KASAN [ 168.539656] CPU: 13 PID: 759 Comm: bash Tainted: G B 5.15.0-rc2-next-202100 [ 168.540954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_0738364 [ 168.542736] RIP: 0010:bfq_pd_init+0x88/0x1e0 [ 168.543318] Code: 98 00 00 00 e8 c9 e4 5b ff 4c 8b 65 00 49 8d 7c 24 08 e8 bb e4 5b ff 4d0 [ 168.545803] RSP: 0018:ffff88817095f9c0 EFLAGS: 00010002 [ 168.546497] RAX: 0000000000000001 RBX: ffff888101a1c000 RCX: 0000000000000000 [ 168.547438] RDX: 0000000000000003 RSI: 0000000000000002 RDI: ffff888106553428 [ 168.548402] RBP: ffff888106553400 R08: ffffffff961bcaf4 R09: 0000000000000001 [ 168.549365] R10: ffffffffa2e16c27 R11: fffffbfff45c2d84 R12: 0000000000000000 [ 168.550291] R13: ffff888101a1c098 R14: ffff88810c7a08c8 R15: ffffffffa55541a0 [ 168.551221] FS: 00007fac75227700(0000) GS:ffff88839ba80000(0000) knlGS:0000000000000000 [ 168.552278] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 168.553040] CR2: 0000000000000008 CR3: 0000000165ce7000 CR4: 00000000000006e0 [ 168.554000] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 168.554929] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 168.555888] Call Trace: [ 168.556221] <TASK> [ 168.556510] blkg_create+0x1c0/0x8c0 [ 168.556989] blkg_conf_prep+0x574/0x650 [ 168.557502] ? stack_trace_save+0x99/0xd0 [ 168.558033] ? blkcg_conf_open_bdev+0x1b0/0x1b0 [ 168.558629] tg_set_conf.constprop.0+0xb9/0x280 [ 168.559231] ? kasan_set_track+0x29/0x40 [ 168.559758] ? kasan_set_free_info+0x30/0x60 [ 168.560344] ? tg_set_limit+0xae0/0xae0 [ 168.560853] ? do_sys_openat2+0x33b/0x640 [ 168.561383] ? do_sys_open+0xa2/0x100 [ 168.561877] ? __x64_sys_open+0x4e/0x60 [ 168.562383] ? __kasan_check_write+0x20/0x30 [ 168.562951] ? copyin+0x48/0x70 [ 168.563390] ? _copy_from_iter+0x234/0x9e0 [ 168.563948] tg_set_conf_u64+0x17/0x20 [ 168.564467] cgroup_file_write+0x1ad/0x380 [ 168.565014] ? cgroup_file_poll+0x80/0x80 [ 168.565568] ? __mutex_lock_slowpath+0x30/0x30 [ 168.566165] ? pgd_free+0x100/0x160 [ 168.566649] kernfs_fop_write_iter+0x21d/0x340 [ 168.567246] ? cgroup_file_poll+0x80/0x80 [ 168.567796] new_sync_write+0x29f/0x3c0 [ 168.568314] ? new_sync_read+0x410/0x410 [ 168.568840] ? __handle_mm_fault+0x1c97/0x2d80 [ 168.569425] ? copy_page_range+0x2b10/0x2b10 [ 168.570007] ? _raw_read_lock_bh+0xa0/0xa0 [ 168.570622] vfs_write+0x46e/0x630 [ 168.571091] ksys_write+0xcd/0x1e0 [ 168.571563] ? __x64_sys_read+0x60/0x60 [ 168.572081] ? __kasan_check_write+0x20/0x30 [ 168.572659] ? do_user_addr_fault+0x446/0xff0 [ 168.573264] __x64_sys_write+0x46/0x60 [ 168.573774] do_syscall_64+0x35/0x80 [ 168.574264] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 168.574960] RIP: 0033:0x7fac74915130 [ 168.575456] Code: 73 01 c3 48 8b 0d 58 ed 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 444 [ 168.577969] RSP: 002b:00007ffc3080e288 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 168.578986] RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007fac74915130 [ 168.579937] RDX: 0000000000000009 RSI: 000056007669f080 RDI: 0000000000000001 [ 168.580884] RBP: 000056007669f080 R08: 000000000000000a R09: 00007fac75227700 [ 168.581841] R10: 000056007655c8f0 R11: 0000000000000246 R12: 0000000000000009 [ 168.582796] R13: 0000000000000001 R14: 00007fac74be55e0 R15: 00007fac74be08c0 [ 168.583757] </TASK> [ 168.584063] Modules linked in: [ 168.584494] CR2: 0000000000000008 [ 168.584964] ---[ end trace 2475611ad0f77a1a ]--- This is because blkg_alloc() is called from blkg_conf_prep() without holding 'q->queue_lock', and elevator is exited before blkg_create(): thread 1 thread 2 blkg_conf_prep spin_lock_irq(&q->queue_lock); blkg_lookup_check -> return NULL spin_unlock_irq(&q->queue_lock); blkg_alloc blkcg_policy_enabled -> true pd = ->pd_alloc_fn blkg->pd[i] = pd blk_mq_exit_sched bfq_exit_queue blkcg_deactivate_policy spin_lock_irq(&q->queue_lock); __clear_bit(pol->plid, q->blkcg_pols); spin_unlock_irq(&q->queue_lock); q->elevator = NULL; spin_lock_irq(&q->queue_lock); blkg_create if (blkg->pd[i]) ->pd_init_fn -> q->elevator is NULL spin_unlock_irq(&q->queue_lock); Because blkcg_deactivate_policy() requires queue to be frozen, we can grab q_usage_counter to synchoronize blkg_conf_prep() against blkcg_deactivate_policy(). Fixes: e21b7a0b9887 ("block, bfq: add full hierarchical scheduling and cgroups support") Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Acked-by: Tejun Heo <tj(a)kernel.org> Link: https://lore.kernel.org/r/20211020014036.2141723-1-yukuai3@huawei.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflict: block/blk-cgroup.c - commit ed6cddefdfd3 ("block: convert the rest of block to bdev_get_queue") is not backported. - commit 015d254cb02b ("blkcg: separate blkcg_conf_get_disk() out of blkg_conf_prep()") is not backported. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-cgroup.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-) diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index 7dca3a0144243..d4a8d8fbe1a0e 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -857,6 +857,14 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, q = disk->queue; + /* + * blkcg_deactivate_policy() requires queue to be frozen, we can grab + * q_usage_counter to prevent concurrent with blkcg_deactivate_policy(). + */ + ret = blk_queue_enter(q, 0); + if (ret) + goto fail; + rcu_read_lock(); spin_lock_irq(q->queue_lock); @@ -891,13 +899,13 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, new_blkg = blkg_alloc(pos, q, GFP_KERNEL); if (unlikely(!new_blkg)) { ret = -ENOMEM; - goto fail; + goto fail_exit_queue; } if (radix_tree_preload(GFP_KERNEL)) { blkg_free(new_blkg); ret = -ENOMEM; - goto fail; + goto fail_exit_queue; } rcu_read_lock(); @@ -926,6 +934,7 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, goto success; } success: + blk_queue_exit(q); ctx->disk = disk; ctx->blkg = blkg; ctx->body = body; @@ -936,6 +945,8 @@ int blkg_conf_prep(struct blkcg *blkcg, const struct blkcg_policy *pol, fail_unlock: spin_unlock_irq(q->queue_lock); rcu_read_unlock(); +fail_exit_queue: + blk_queue_exit(q); fail: put_disk_and_module(disk); /* -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] isdn: cpai: check ctr->cnr to avoid array index out of bound
by Yang Yingliang 01 Nov '21

01 Nov '21

From: Xiaolong Huang <butterflyhuangxx(a)gmail.com> stable inclusion from linux-4.19.214 commit 7d91adc0ccb060ce564103315189466eb822cc6a CVE: CVE-2021-3896 -------------------------------- commit 1f3e2e97c003f80c4b087092b225c8787ff91e4d upstream. The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by: Xiaolong Huang <butterflyhuangxx(a)gmail.com> Acked-by: Arnd Bergmann <arnd(a)arndb.de> Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Rui Xiang <rui.xiang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/isdn/capi/kcapi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/isdn/capi/kcapi.c b/drivers/isdn/capi/kcapi.c index a4ceb61c5b603..ed9ee2bbf232e 100644 --- a/drivers/isdn/capi/kcapi.c +++ b/drivers/isdn/capi/kcapi.c @@ -565,6 +565,11 @@ int detach_capi_ctr(struct capi_ctr *ctr) ctr_down(ctr, CAPI_CTR_DETACHED); + if (ctr->cnr < 1 || ctr->cnr - 1 >= CAPI_MAXCONTR) { + err = -EINVAL; + goto unlock_out; + } + if (capi_controller[ctr->cnr - 1] != ctr) { err = -EINVAL; goto unlock_out; -- 2.25.1

1 0