- Kernel - mailweb.openeuler.org

关于nvme驱动可靠性优化合入open euler事宜
by Lengchao 13 Apr '20

13 Apr '20

背景说明： NVMe over fabric是存储协议应用的发展方向，业界存储主流厂商均已经发布支持的产品，在测试验证过程中发现一些可靠性问题：基于RHEL/CENT OS 8.0发现如下一些问题： 1、反复闪断端口，主机出现死锁，导致nvme controller卡住，无法恢复，需要重启才能恢复； 2、反复重启存储端服务，主机端crash； 3、通过命令行进行delete controller时导致crash（在nvme over roce连接已经断开时），进行reset controller时导致死锁，controller不能恢复需要重启才能恢复。（在nvme over roce连接已经断开时） 4、 Nvme对于错误码处理考虑不是很完善，在多个不同主机同时对一个存储大压力情况下，存储端需要回复类似busy错误码，在有多路径（DM-Multipath）的情况下会直接向上返回错误码，由于多条路径均返回错误码，导致业务中断或IO归零。 PS：多路径是存储应用必配的。 5、 Nvme 原生多路径对于路径识别采用的机制和传统的多路径软件识别路径方式不同，对于双活支持不友好。PS：双活是存储高可靠应用的典型应用场景。 PS：1、2、3中的问题有多个，其中已经确定部分问题开源社区最新版本已经解决，部分问题未解决，还有部分问题正在分析中； RHEL/CENT OS 8.0内核版本是4.18，open euler最新发布版本的内核版本是4.19，从初步的分析来看，以上问题在open euler均存在。诉求： 1、已经合入社区最新版本的问题，能够快速合入open euler下一个发布版本； 2、对于社区未解决的问题，能够快速推动合入社区，并合入open euler下一个发布版本； 3、针对上述第4、5项，nvme驱动如何优化，并推动合入社区； Open euler对nvme驱动可靠性优化合入的计划是什么样的，如何深度合作快速推动？非常感谢！

2 1

[summit]openEuler Virtual Summit 2020 will be held on Apr. 17th and 18th
by Fred Li 13 Apr '20

13 Apr '20

Hi all, I am exited to announce that openEuler Virtual Summit is coming! Due to COVID-19, we have to hold the first summit virtually, and I believe this is good to all the members' health. Please stay healthy and strong. Please visit https://openeuler.org/zh/summit/2020-virtual-summit.html (Chinese) or https://openeuler.org/en/summit/2020-virtual-summit.html (English) for details. As you can find on the page, there are several pases: 1. From now on to April 9th, it is call for speakers. To emphasize, this is only for Design summit, and please developers to start planning your design summit. 2. From Apr. 10th to 15th, it is open for registration. 3. The summit will be on Apr. 17th and 18th. There will be 2 parts. The first one is summit, and the second one is design summit. On Design summit, the contributors will have a virtual face to face meeting to discuss what we will develop for next release, which is openEuler 20.09 here. openEuler SIGs maintainers, please start to plan the design summit for your SIG with your team. Please note that you will have 2 hours for the meeting. Once confirmed, please send the following information to marketing(a)openeuler.org. Make sure you have subscribed [1]. - group name (SIG name): - chair: - BIO of the chair: - Brief introduction to the meeting: [1] https://mailweb.openeuler.org/postorius/lists/marketing@openeuler.org/ -- Regards Fred Li (李永乐)

7 10

openEuler峰会议题-RaspberryPi
by 方亚芬 11 Apr '20

11 Apr '20

老师，您好。以下是 RaspberryPi SIG 组参与的议题。烦请查收，谢谢。- 组名：树莓派 - 主持人：方亚芬 - 主持人简介：树莓派 SIG 组负责人 - 会议议程简介：本次会议主要介绍如下内容： 1、RaspberryPi SIG 组的背景介绍 2、RaspberryPi SIG 组的当前工作进展包括 openEuler 移植到树莓派的方法、当前存在问题及解决方案 3、后续发展规划 - group name (SIG name): RaspberryPi - chair: YaFen Fang - BIO of the chair: RaspberryPI SIG maintainer. - Brief introduction to the meeting: 1. Background of RaspberryPi SIG group. 2. Current progress of RaspberryPi SIG Include how to migrate openEuler to Raspberry Pi, and how to tackle current problems. 3. Future plan 祝工作顺利，生活愉快。 ------------------------------------------ 方亚芬中国科学院软件研究所智能软件研究中心邮箱：yafen(a)iscas.ac.cn 地址：北京市海淀区中关村南四街4号5楼

2 1

关于优化社区文档的阅读体验，欢迎您的反馈/Optimized the reading experience of document in the community document.Your feedback is welcome
by Junqi?Xie 10 Apr '20

10 Apr '20

关于优化社区文档的阅读体验，欢迎您的反馈： https://gitee.com/openeuler/website/issues/I1E208?from=project-issue issue内容如下：关于文档阅读体验，有如下issue反馈： 1、https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2、https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3、https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue 主要问题点在于： 1、目录结构不易展开 2、文档内容不连续，层级太多且无法顺畅翻页阅读。每次都需要在左侧导航切换希望提供pdf、single page、multi page不同阅读体验 sigle page：一个页面显示一个章节的所有内容，且能够提供页内的索引、目录或者浮动目录 multi page：一个页面内显示一个手册的所有内容。针对这些问题，请大家体验下mindspore资料阅读方式，如果大家认可该方式，openEuler社区文档就按照该框架优化资料阅读内容： https://www.mindspore.cn/tutorial/zh-CN/master/index.html 您是否认可mindspore的阅读体验？或者有更好的建议参考? 【English】 The following issues have been reported regarding document reading experience: 1.https://gitee.com/openeuler/docs/issues/I1CTZ8?from=project-issue 2.https://gitee.com/openeuler/docs/issues/I1CPWY?from=project-issue 3.https://gitee.com/openeuler/docs/issues/I1CPXV?from=project-issue The main problems are as follows: 1.The directory structure is difficult to expand. 2.The document content is not continuous. There are too many layers and pages cannot be turned smoothly. You need to switch between the navigation tree on the left each time. Different reading experience for PDF, single page, and multi page. sigle page: All contents of a chapter are displayed on a page. In addition, indexes, directories, or floating directories can be provided on the page. multi page: displays all contents of a manual on a page. To solve these problems, please experience the MindSpore documentation reading mode. If you agree with this mode or have made improvements based on this mode, the documentation of the OpenEuler community will be optimized based on this mode. **https://www.mindspore.cn/tutorial/zh-CN/master/index.html ** Do you recognize mindspore's reading experience? Or do you have any better suggestions?

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 08 Apr '20

08 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [简体中文](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction + https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM 兴趣小组 +[English](./sig-mpam.md) | 简体中文 + +MPAM(Memory Partitioning and Monitoring) 是鲲鹏920的新特性，用来控制 Cache, +内存带宽等资源的分配。混部业务场景下共享资源竞争可能会对业务性能造成很大干扰, +MPAM特性，针对LLC及访存带宽进行隔离和限制，可以减少业务间干扰，保障高优先级业务等。 + +## SIG组工作目标和范围 + +- 使能鲲鹏芯片的 MPAM 特性 +- 完善 MPAM 配套工具, 和文档 +- 推动和协助 MPAM 在实际场景中的应用和落地 +- 根据应用场景的诉求改进 MPAM +- 探索 MPAM 的新应用场景 +- 通过更多的应用和测试，推动MPAM驱动进入内核上游社区 + +### 该SIG管理的repository及描述 + +- 项目名称： + - mpam document：https://gitee.com/openeuler/mpam + - mpam 驱动在 kernel 仓库中：https://gitee.com/openeuler/kernel + - 将来会有 mpam 配套用户态工具 + +### 跨领域和面向外部的流程 + + 由该SIG定义和执行的，且跨领域和面向外部的流程和行动： + + - 非内部流程清单 + - 该SIG拥有的面向整个openEulerSIG的组织指导计划等 diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

1 0

[PATCH] apply to add a new mpam sig
by Xie XiuQi 06 Apr '20

06 Apr '20

MPAM is a new feature on Kunpeng platform, which is used to control LLC and memory bandwidth allocation and monitoring. SIG Mission and Scope: - enable mpam feature on Kunpeng Platform - develop supporting tools - assist the application in actual scenarios - improve MPAM according to the requirements of application scenarios - explore new application scenarios for MPAM - through more applications and tests, push the MPAM driver into the kernel upstream Signed-off-by: Xie XiuQi <xiexiuqi(a)huawei.com> --- repository/openeuler.yaml | 5 ++++ sig/sig-mpam/sig-mpam.md | 48 +++++++++++++++++++++++++++++++++++++ sig/sig-mpam/sig-mpam_cn.md | 29 ++++++++++++++++++++++ sig/sigs.yaml | 5 +++- 4 files changed, 86 insertions(+), 1 deletion(-) create mode 100644 sig/sig-mpam/sig-mpam.md create mode 100644 sig/sig-mpam/sig-mpam_cn.md diff --git a/repository/openeuler.yaml b/repository/openeuler.yaml index f91d628..23584c5 100644 --- a/repository/openeuler.yaml +++ b/repository/openeuler.yaml @@ -151,3 +151,8 @@ repositories: protected_branches: - master type: public +- name: mpam + description: "Memory System Resource Partitioning and Monitoring" + protected_branches: + - master + type: public diff --git a/sig/sig-mpam/sig-mpam.md b/sig/sig-mpam/sig-mpam.md new file mode 100644 index 0000000..743486f --- /dev/null +++ b/sig/sig-mpam/sig-mpam.md @@ -0,0 +1,48 @@ +# Application to create mpam SIG +English | [��](./sig-template_cn.md) + +MPAM is a new feature on Kunpeng platform, which is used to control LLC +and memory bandwidth allocation and monitoring. + +## SIG Mission and Scope + +- enable mpam feature on Kunpeng Platform +- develop supporting tools +- assist the application in actual scenarios +- improve MPAM according to the requirements of application scenarios +- explore new application scenarios for MPAM +- through more applications and tests, push the MPAM driver into the kernel upstream + +### Deliverables + +- mpam document: https://gitee.com/openeuler/mpam +- mpam drivers (inlcuded in kernel tree): https://gitee.com/openeuler/kernel +- mpam supporting tools (todo) + +### Repositories and description managed by this SIG + + +### Cross-domain and external-oriented processes + +## Basic Information + +### Project Introduction +��https: /gitee.com/openeuler/community/sig/sig-mpam/ + +``` +### Maintainers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Committers +- Xie XiuQi [@xiexiuqi](https://gitee.com/xiexiuqi) +- Wang Shaobo [@jentlestea](https://gitee.com/jentlestea) + +### Mailing list +- kernel(a)openeuler.org + +### IRC Channel +NA + +``` + diff --git a/sig/sig-mpam/sig-mpam_cn.md b/sig/sig-mpam/sig-mpam_cn.md new file mode 100644 index 0000000..6ffc41b --- /dev/null +++ b/sig/sig-mpam/sig-mpam_cn.md @@ -0,0 +1,29 @@ +# openEuler MPAM �� +[English](./sig-mpam.md) | �� + +MPAM(Memory Partitioning and Monitoring) ��920�� Cache, +��, +MPAM��LLC�� + +## SIG�� + +- �� MPAM �� +- �� MPAM ��, �� +- �� MPAM �� +- �� MPAM +- �� MPAM �� +- ��MPAM�� + +### ��SIG��repository�� + +- �� + - mpam document��https://gitee.com/openeuler/mpam + - mpam �� kernel ��https://gitee.com/openeuler/kernel + - �� mpam �� + +### �� + + ��SIG�� + + - �� + - ��SIG��openEulerSIG�� diff --git a/sig/sigs.yaml b/sig/sigs.yaml index 9a6e01a..9760ba4 100644 --- a/sig/sigs.yaml +++ b/sig/sigs.yaml @@ -4149,4 +4149,7 @@ sigs: - name: sig-RaspberryPi repositories: - openeuler/raspberrypi - - openeuler/raspberrypi-kernel \ No newline at end of file + - openeuler/raspberrypi-kernel +- name: sig-mpam + repositories: + - openeuler/mpam -- 2.20.1

2 1

回复:Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 31 Mar '20

31 Mar '20

Glad to. I will resend a V2. ---------- 该邮件从移动设备发送 --------------原始邮件-------------- 发件人："Xie XiuQi "<xiexiuqi(a)huawei.com>; 发送时间：2020年3月31日(星期二) 上午10:57 收件人："huangdaode" <huangdaode(a)huawei.com>;"Guohanjun (Hanjun Guo)" <guohanjun(a)huawei.com>;"Zhengyuan Liu" <liuzhengyuan(a)tj.kylinos.cn>;"kernel(a)openeuler.org" <kernel(a)openeuler.org>;"lipeng (Y)" <lipeng321(a)huawei.com>; 主题：Re: 答复: [PATCH] KYLIN: hns3: fix a compilation error ----------------------------------- Hi Zhengyuan, Would you please resend a patch to remove those ccflags? Thanks! On 2020/3/31 9:34, huangdaode wrote: > Yes, I don't think we need these flags in open kernel tree, it's for product compile. > > -----邮件原件----- > 发件人: Xiexiuqi > 发送时间: 2020年3月27日 17:14 > 收件人: Guohanjun (Hanjun Guo) <guohanjun(a)huawei.com>; Zhengyuan Liu <liuzhengyuan(a)tj.kylinos.cn>; kernel(a)openeuler.org; huangdaode <huangdaode(a)huawei.com>; lipeng (Y) <lipeng321(a)huawei.com> > 主题: Re: [PATCH] KYLIN: hns3: fix a compilation error > > Hi Li Peng & Daode, > > Please help to check this patch about hns3's Makefile. > > On 2020/3/27 11:38, Hanjun Guo via Kernel wrote: >> On 2020/3/25 9:12, Zhengyuan Liu wrote: >>> >>> >>> On 2020/3/24 下午9:22, Hanjun Guo wrote: >>>> Hi Zhengyuan, >>>> >>>> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>>>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> >>>>> Make stack-protector-strong building flag depend on >>>>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a >>>>> copmilation error: >>>>> >>>>>     MODPOST 1532 modules >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>>>>     ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>>>>     make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>>>> >>>>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>>>> --- >>>>>   drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>>>>   1 file changed, 2 insertions(+) >>>>> >>>>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> index 6653e81ede9a..f4952f46be7f 100644 >>>>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>>>> @@ -4,7 +4,9 @@ >>>>>   # >>>>>     # Add security options >>>>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>>>>   ccflags-y += -fstack-protector-strong >>>> >>>> I'm not sure why we need this compile option, seems we need to >>>> remove all those ccflags-y in this file, I will take a look and get >>>> back to you. >>> >>> Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. >> >> I think we need to remove those ccflags, could you please send another >> version of the patch? > > Hi, Hanjun, > I agree with you, we do not need this ccflags in kernel tree. > What do you think, Li Peng & Daode? > > @Li Peng, @Huang Daode. > >> >> Thanks >> Hanjun >> _______________________________________________ >> Kernel mailing list -- kernel(a)openeuler.org To unsubscribe send an >> email to kernel-leave(a)openeuler.org >> >

1 0

Re: [PATCH] KYLIN: hns3: fix a compilation error
by Hanjun Guo 31 Mar '20

31 Mar '20

On 2020/3/25 9:12, Zhengyuan Liu wrote: > > > On 2020/3/24 下午9:22, Hanjun Guo wrote: >> Hi Zhengyuan, >> >> On 2020/3/20 18:55, Zhengyuan Liu via Kernel wrote: >>> From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> >>> Make stack-protector-strong building flag depend on >>> CONFIG_STACKPROTECTOR_STRONG, otherwise there could >>> be a copmilation error: >>> >>> MODPOST 1532 modules >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! >>> ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! >>> make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 >>> >>> Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> >>> --- >>> drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ >>> 1 file changed, 2 insertions(+) >>> >>> diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> index 6653e81ede9a..f4952f46be7f 100644 >>> --- a/drivers/net/ethernet/hisilicon/hns3/Makefile >>> +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile >>> @@ -4,7 +4,9 @@ >>> # >>> # Add security options >>> +ifdef CONFIG_STACKPROTECTOR_STRONG >>> ccflags-y += -fstack-protector-strong >> >> I'm not sure why we need this compile option, seems we need to remove >> all those ccflags-y in this file, I will take a look and get back to >> you. > > Hi Hanjun, thanks for your reply. I'm curious about that ccflags too, the upstream seems to haven't those flags. I think we need to remove those ccflags, could you please send another version of the patch? Thanks Hanjun

3 3

Re: [Tc] SIG组工作审视
by Fred Li 27 Mar '20

27 Mar '20

Happy to see technical committee members will mentor us. Many thanks in advance. On Fri, Mar 27, 2020 at 7:54 PM myeuler <myeuler(a)163.com> wrote: > > Hi, All tc members, Please do the SIG work review according to this list: > 1. xinwei hu : Virt, system-tool, storage, sig-kernel, sig-community > 2. hong xie : sig-bounds_checking_function, sig-ai-bigdata, security-committee, Runtime, Programming-language > 3. hanjun guo : Private, Packaging, oVirt, Others, Networking, > 4. xiuqi Xie : Kernel, kae, iSulad, Infrastructure, doc > 5. hailiang Zhang : Desktop, DB, Container, Computing > 6. Xun Wang : Compiler, Base-service, A-Tune, atune > 7 Wei Xiong : dev-util, Application, sig-template, sig-mate-desktop > > 请各位委员按照上述的分组对SIG组进行审视，审视的内容包含： > 1. SIG组是否正常运作。是否有明确的负责人。 > 2. 相关的项目是否已经有输出，相关软件是否已经进入gitee仓。 > 3. 相关SIG的主页面是否有明确的介绍信息和完善的说明。 > > 下次TC meeting我们审视一下这些SIG的运作，一些SIG是否需要保留或者合并请各位委员给出建议和意见。 > > 谢谢。 > > > > > _______________________________________________ > Tc mailing list -- tc(a)openeuler.org > To unsubscribe send an email to tc-leave(a)openeuler.org -- Regards Fred Li (李永乐)

1 0

re: How to get guaranteed TF for openeuler.org ?
by ETTA 27 Mar '20

27 Mar '20

Here is how, Guranteed TF above 20 or 30 http://www.str8-creative.io/product/trust-flow-seo-package/ That equals immediate higher rankings TF report attached Regards ETTA Unsubscribe option is available on the footer of our website

1 0

[PATCH] KYLIN: hns3: fix a compilation error
by Zhengyuan Liu 25 Mar '20

25 Mar '20

From: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> Make stack-protector-strong building flag depend on CONFIG_STACKPROTECTOR_STRONG, otherwise there could be a copmilation error: MODPOST 1532 modules ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3_cae.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hns3.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclgevf.ko] undefined! ERROR: "__stack_chk_fail" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! ERROR: "__stack_chk_guard" [drivers/net/ethernet/hisilicon/hns3/hclge.ko] undefined! make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1 Signed-off-by: Zhengyuan Liu <liuzhengyuan(a)kylinos.cn> --- drivers/net/ethernet/hisilicon/hns3/Makefile | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/hisilicon/hns3/Makefile b/drivers/net/ethernet/hisilicon/hns3/Makefile index 6653e81ede9a..f4952f46be7f 100644 --- a/drivers/net/ethernet/hisilicon/hns3/Makefile +++ b/drivers/net/ethernet/hisilicon/hns3/Makefile @@ -4,7 +4,9 @@ # # Add security options +ifdef CONFIG_STACKPROTECTOR_STRONG ccflags-y += -fstack-protector-strong +endif ccflags-y += -Wl,-z,relro,-z,now ccflags-y += -Wl,-z,noexecstack ccflags-y += -D_FORTIFY_SOURCE=2 -O2 -- 2.20.1

2 2

[PATCH 0/2] livepatch/core: support jump_label
by Cheng Jian 24 Mar '20

24 Mar '20

livepatch/core: support jump_label Cheng Jian (2): livepatch/core: support jump_label livepatch/core: fix kabi for klp_rel_state include/linux/jump_label.h | 1 + include/linux/module.h | 43 +++++++++++++++++++++++++++++++++++++++++++ kernel/jump_label.c | 16 ++++++++++++++++ kernel/livepatch/core.c | 7 +++++++ kernel/module.c | 5 ++++- 5 files changed, 71 insertions(+), 1 deletion(-) -- 2.7.4

1 2

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:56, haoxin wrote: > 非常感谢您的回复，谢谢，我还想问下，intel rdt resctrl挂载后下有很多配置文件，例如mon_data下的llc_occupancy、mbm_local_bytes、mbm_total_bytes等，这些是在后续会实现还是不再提供类似文件？ > 近期暂时还没有改动，后续支持鲲鹏930的版本可以考虑。当前如果有场景确实需要，以及有效果的话，也可以考虑提供。 > > > > > > 在 2020-03-23 09:38:58，"Xie XiuQi via Kernel" <kernel(a)openeuler.org> 写道： >> >> >>On 2020/3/23 9:15, haoxin wrote: >>> 您好： >>> 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？ >> >>有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 >> >>----- >>1 背景 >>MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. >>Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, >>我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。 >>社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). >> >>2 Quick Start >>Hi620 2P 为例, 其基本情况: >> >>2.1 linux kernel 使能 mpam 特性 >>openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. >>openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. >> >>2.2 挂载 resctrl >>系统启动后, 需要手动 mount resctrl 才能使用. >> >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >>2.3 配置和使用资源组 >>2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way >># 每个目录表示对于的 L3T >>cd /sys/fs/resctrl >> >># 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way >># 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) >>mkdir p1 >>cd p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >># 更多的例子 >># partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) >># mask 16进制 >>mkdir p2 >>cd p2 >>echo "L3:0=30;1=f0;2=30;3=f0" > schemata >>cat schemata # 查看设置情况 >>cd .. # 返回上次目录 >> >>Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； >> >>2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况 >>由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. >> >># p1 分组已存在, 开启 monitor >>echo 1 > /sys/fs/resctrl/p1/ctrlmon >># 观察该组资源的使用情况 >># L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; >># Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) >>grep . /sys/fs/resctrl/p1/mon_data/* >> >>2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) >># task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 task 19 move 到 p1 资源组中 >># 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 >># move 进程时, 已创建的子进程不影响 >>echo 19 > /sys/fs/resctrl/p1/tasks >> >># 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) >>echo $$ > /sys/fs/resctrl/p1/tasks >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p1/tasks >> >>2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) >>即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) >> >># task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) >># 将 cpu 1 move 到 p2 资源组中 >>echo 1 > /sys/fs/resctrl/p2/cpus_list >> >># 查看 task 的设置情况 >>cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 >>cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 >> >>2.4 内存带宽资源划分 >> >>2.4.1 为 PART 1 设置内存带宽的上限 >># PART 1, 最多使用约 50% 的带宽; >># 0,1,2,3 分别表示 4 个 numa node >># 带宽按照百分比进行设置, 最小粒度是 5% 对齐. >> >>echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata >> >>2.4.3 分配进程(pid)到资源分组 >>挂载 resctrl >>cache 资源划分 >>设置 monitor >>起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) >># 挂载 mpamctrl >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) >># partid=1, mask=f >>mkdir p1 >>echo "L3:0=f;1=f;2=f;3=f" > schemata >> >># 使用 monitor 1 来监控 part 1 的 cache 使用情况 >># monitor=1, pmg=1, partid=1 >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > p1/tasks >> >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & >> >># lat_mem_rd 测试完成后查看结果. >>如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: >> >>echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata >>测试过程中如果想观察 Cache 的使用情况 >> >>grep . /sys/fs/resctrl/p1/mon_data/L3* >> >>3.2 限制内存带宽的例子 >>步骤: >> >>挂载 resctrl >>限制资源划分 >>设置 monitor >>起测试程序 >>mount -t resctrl resctrl /sys/fs/resctrl >>cd /sys/fs/resctrl >> >># 0/100 表示不限制 >># 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). >>mkdir p1 >>echo "MB:0=30;1=30;2=30;3=30" > p1/schemata >>echo 1 > p1/ctrlmon >> >># 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) >># 两个 $$ 代表当前 shell 的pid >>echo $$ > /sys/fs/resctrl/p1/tasks >># 在后台跑测试程序, 测试结果记录到 result.log 中 >>cd /root >>/root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & >> >># 观察monitor情况 >>cd /sys/fs/resctrl >># monitor=1 >>grep . /sys/fs/resctrl/p1/mon_data/MB* >> >> >>> >>> 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ >>> >>> 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 >>> >>> “num_rmids”: >>> The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. >>> “mon_features”: >>> Lists the monitoring events if monitoring is enabled for the resource. >>> “max_threshold_occupancy”: >>> Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. >>> >>> >>> >>> >>> >>_______________________________________________ >>Kernel mailing list -- kernel(a)openeuler.org >>To unsubscribe send an email to kernel-leave(a)openeuler.org > > > > >

1 0

Re: openEuler-1.0是否完整支持mpam功能
by Xie XiuQi 23 Mar '20

23 Mar '20

On 2020/3/23 9:15, haoxin wrote: > 您好： > 请问目前欧拉这块有关于mpam功能验证的测试方法或者手册吗？有一个简单的操作说明，你可以针对场景做一下测试。有问题可以反馈。 ----- 1 背景 MPAM 特性是 ARM v8.4 引入的 Cache QoS, 和内存带宽 QoS 特性. 目前业界与之最接近的是 intel 的 RDT 特性. Intel RDT 在 Linux 内核中的使用接口是 resctrl。这是一个基于 kernfs 实现的操作接口。为支持 MPAM 特性, 我们的目标也是实现类似 intel rdt 的 resctrl 用户接口。社区当前还没有 ARM64 resctrl 接口的实现(arm公司在做, 还没有发开源社区). 2 Quick Start Hi620 2P 为例, 其基本情况: 2.1 linux kernel 使能 mpam 特性 openEuler 中 mpam 是 preview 特性, 当前版本暂没有商用, 默认没有使能. 如果想在鲲鹏920 2P 板子上验证 mpam 特性, 需要在启动参数中加 mpam 使能. openEuler 上使能 mpam, 需要在 /boot/grub2/grub.cfg 或 /boot/efi/EFI/euleros/grub.cfg 中添加 mpam 启动参数. 2.2 挂载 resctrl 系统启动后, 需要手动 mount resctrl 才能使用. mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl 2.3 配置和使用资源组 2.3.1 为 L3 Cache 的 PARTID 1 分配 4 个 Cache way # 每个目录表示对于的 L3T cd /sys/fs/resctrl # 先选择某个 PARTID, 在为其设定 mask, mask 就是对应的 cache way # 这里选 partid=1, mask=f, 即为 partid 1 分了 0-3 计4条way (共15条way) mkdir p1 cd p1 echo "L3:0=f;1=f;2=f;3=f" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 # 更多的例子 # partid = 2, N0 (way 5,6), N1 (way 5-8), N2 (way 5,6), N3 (way 5-15) # mask 16进制 mkdir p2 cd p2 echo "L3:0=30;1=f0;2=30;3=f0" > schemata cat schemata # 查看设置情况 cd .. # 返回上次目录 Cache 和内存带宽的 partid 数量不同, 但是 resctrl 接口当前又是Cache和partid同时操作的, 所以当前实现时已最小的为准； 2.3.2 为 Cache/memory bandwidth 设置 monitor, 并观察期使用情况由于 monitor 数量较少, 所以在创建分组的时候没有默认开启, 需要手动开启. # p1 分组已存在, 开启 monitor echo 1 > /sys/fs/resctrl/p1/ctrlmon # 观察该组资源的使用情况 # L3 Cache 的单位是 Bytes, 表明当前 Cache 被占用这么多; # Memory Bandwidth 单位是MB/s (架构要求的是 MB/s, 鲲鹏920 看具体实现) grep . /sys/fs/resctrl/p1/mon_data/* 2.3.3 为进程/线程分配分组(让进程/线程只使用某个 part 的资源) # task 19 将使用 partid 1 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 task 19 move 到 p1 资源组中 # 新创建的子进程, 将继承父进程的 partid 和 pmg 信息 # move 进程时, 已创建的子进程不影响 echo 19 > /sys/fs/resctrl/p1/tasks # 设置当前 shell 使用那个组的Cache资源 ($$ 表示当前 shell 的 PID) echo $$ > /sys/fs/resctrl/p1/tasks # 查看 task 的设置情况 cat /sys/fs/resctrl/p1/tasks 2.3.4 为 cpu 分配分组(让指定的 cpu 只使用某个 part 的资源) 即, 该 cpu 上发出的所有请求都是要改资源组限定的资源(cache, memory bandwidth) # task 1 将使用 partid 2 限定的资源 (pmg 在监控的时候用, pmg 和 partid 都匹配, 才进行统计监控使用情况) # 将 cpu 1 move 到 p2 资源组中 echo 1 > /sys/fs/resctrl/p2/cpus_list # 查看 task 的设置情况 cat /sys/fs/resctrl/p2/cpus # 掩码方式显示 cat /sys/fs/resctrl/p2/cpus_list # 列表方式显示 2.4 内存带宽资源划分 2.4.1 为 PART 1 设置内存带宽的上限 # PART 1, 最多使用约 50% 的带宽; # 0,1,2,3 分别表示 4 个 numa node # 带宽按照百分比进行设置, 最小粒度是 5% 对齐. echo "MB:0=50;1=50;2=50;3=50" > /sys/fs/resctrl/p1/schemata 2.4.3 分配进程(pid)到资源分组挂载 resctrl cache 资源划分设置 monitor 起测试程序 (假设 lat_mem_rd 程序在 /root 目录下面, 其他随便什么程序都一样) # 挂载 mpamctrl mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 使用 part 1, 为其分配 4 个way (4 个 node 采用相同的设置) # partid=1, mask=f mkdir p1 echo "L3:0=f;1=f;2=f;3=f" > schemata # 使用 monitor 1 来监控 part 1 的 cache 使用情况 # monitor=1, pmg=1, partid=1 echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/lat_mem_rd -P 1 -N 1 512M 64 > result.log 2 > &1 & # lat_mem_rd 测试完成后查看结果. 如果想再测 8 way 的情况, 则只需改 CPBM 的 mask 即可: echo "L3:0=ff;1=ff;2=ff;3=ff" > schemata 测试过程中如果想观察 Cache 的使用情况 grep . /sys/fs/resctrl/p1/mon_data/L3* 3.2 限制内存带宽的例子步骤: 挂载 resctrl 限制资源划分设置 monitor 起测试程序 mount -t resctrl resctrl /sys/fs/resctrl cd /sys/fs/resctrl # 0/100 表示不限制 # 其他数值表示最大带宽设置的百分比(硬件限制的粒度是 1/64, 软件上近似对应成百分比, 最小按5%对齐). mkdir p1 echo "MB:0=30;1=30;2=30;3=30" > p1/schemata echo 1 > p1/ctrlmon # 设置当前 shell 进程使用 partid 1 (task 使用哪个 part, 在子进程创建时会继承父进程的) # 两个 $$ 代表当前 shell 的pid echo $$ > /sys/fs/resctrl/p1/tasks # 在后台跑测试程序, 测试结果记录到 result.log 中 cd /root /root/bw_mem -P 1 -N 1 512M rd > result.log 2 > &1 & # 观察monitor情况 cd /sys/fs/resctrl # monitor=1 grep . /sys/fs/resctrl/p1/mon_data/MB* > > 此外目前resctrl挂载后和intel rdt进行了对比，发现很多文件都不存在，例如请问是代码还未完成还是做了简化？ > > 例如我在info目录下有L3_MON目录，按照intel rdt的处理，应该有下面一些子文件：但是在mpam下面就没有 > > “num_rmids”: > The number of RMIDs available. This is the upper bound for how many “CTRL_MON” + “MON” groups can be created. > “mon_features”: > Lists the monitoring events if monitoring is enabled for the resource. > “max_threshold_occupancy”: > Read/write file provides the largest value (in bytes) at which a previously used LLC_occupancy counter can be considered for re-use. > > > > >

1 0

[PATCH 0/2] update openeuler_defconfig
by Yang Yingliang 21 Mar '20

21 Mar '20

Xie XiuQi (1): x86/config: enable CONFIG_CFQ_GROUP_IOSCHED Xiongfeng Wang (1): x86/openeuler_config: disable CONFIG_EFI_VARS arch/x86/configs/openeuler_defconfig | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) -- 1.8.3

1 2

[PATCH] btrfs: don't use WARN_ON when ret is -ENOTENT in __btrfs_free_extent()
by Yang Yingliang 20 Mar '20

20 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19039 ------------------------------------------------- Avoid register messages when ret is -ENOTENT. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/btrfs/extent-tree.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 47ca1eb..4bf9318 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -6793,7 +6793,7 @@ static int __btrfs_free_extent(struct btrfs_trans_handle *trans, } extent_slot = path->slots[0]; } - } else if (WARN_ON(ret == -ENOENT)) { + } else if (ret == -ENOENT) { btrfs_print_leaf(path->nodes[0]); btrfs_err(info, "unable to find ref byte nr %llu parent %llu root %llu owner %llu offset %llu", -- 1.8.3

1 0

[PATCH v2] cifs: fix panic in smb2_reconnect
by Yang Yingliang 20 Mar '20

20 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-5.2-rc6 commit 0ff2b018b02f category: bugfix bugzilla: 16811 CVE: NA https://gitee.com/src-openeuler/cifs-utils/issues/I1C1QY?from=project-issue ------------------------------------------------- RH Bugzilla: 1702264 We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Conflicts: fs/cifs/cifsproto.h fs/cifs/connect.c [yyl: make cifs_put_smb_ses() extern] --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 975f800..f031420 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2733,8 +2733,7 @@ static int match_session(struct cifs_ses *ses, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 99efb2b..76dfb4f 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2920,9 +2920,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2941,7 +2946,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3

1 0

[PATCH] fs/cifs: cifs fix panic in smb2_reconnect
by linfeilong 19 Mar '20

19 Mar '20

From: Ronnie Sahlberg <lsahlber(a)redhat.com> mainline inclusion from mainline-v5.1-rc1 commit 0ff2b018b02f89da26a616e0148582321a00fd99 category: bugfix bugzilla: 1702264 CVE: NA ------------------------------------------------- We need to protect so that the call to smb2_reconnect() in smb2_reconnect_server() does not end up freeing the session because it can lead to a use after free and crash. [ 397.787693] CIFS VFS: cifs_mount failed w/return code = -2 [ 403.671998] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [ 403.672065] PGD 0 P4D 0 [ 403.672087] Oops: 0000 [#1] SMP PTI [ 403.672114] CPU: 3 PID: 47 Comm: kworker/3:1 Kdump: loaded Not tainted 4.19.90-2003.1.1.0033.oe1.x86_64 #1 [ 403.672173] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 403.673038] Workqueue: cifsiod smb2_reconnect_server [cifs] [ 403.673746] RIP: 0010:__list_del_entry_valid+0x25/0x90 [ 403.674448] Code: c3 0f 1f 40 00 48 8b 07 48 b9 00 01 00 00 00 00 ad de 48 8b 57 08 48 39 c8 74 26 48 b9 00 02 00 00 00 00 ad de 48 39 ca 74 2e <48> 8b 32 48 39 fe 75 3a 48 8b 50 08 48 39 f2 75 48 b8 01 00 00 00 [ 403.675955] RSP: 0018:ffffbd48007c3e18 EFLAGS: 00010207 [ 403.676696] RAX: 0000000000000000 RBX: ffffbd48007c3e50 RCX: dead000000000200 [ 403.677447] RDX: 0000000000000000 RSI: 0000000000000206 RDI: ffff9bee27f65818 [ 403.678214] RBP: ffffbd48007c3e38 R08: ffff9bee3bba3038 R09: 00000000000002c2 [ 403.679001] R10: ffffbd48006a3d90 R11: 0000000000000000 R12: ffff9bee27f66818 [ 403.679811] R13: 0000000000000001 R14: ffff9bee27f65800 R15: ffff9bee27f65818 [ 403.680639] FS: 0000000000000000(0000) GS:ffff9bee3bb80000(0000) knlGS:0000000000000000 [ 403.681505] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 403.682391] CR2: 0000000000000000 CR3: 000000003040a005 CR4: 00000000003606e0 [ 403.683315] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 403.684247] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 403.685181] Call Trace: [ 403.686141] smb2_reconnect_server+0x17a/0x340 [cifs] [ 403.687118] process_one_work+0x195/0x3d0 [ 403.688102] worker_thread+0x30/0x390 [ 403.689096] ? process_one_work+0x3d0/0x3d0 [ 403.690111] kthread+0x113/0x130 [ 403.691132] ? kthread_create_worker_on_cpu+0x70/0x70 [ 403.692181] ret_from_fork+0x35/0x40 Reviewed-by: Aurelien Aptel <aaptel(a)suse.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Ronnie Sahlberg <lsahlber(a)redhat.com> Signed-off-by: Steve French <stfrench(a)microsoft.com> Reviewed-by: Pavel Shilovsky <pshilov(a)microsoft.com> Signed-off-by: Feilong Lin <linfeilong(a)huawei.com> --- fs/cifs/cifsproto.h | 2 ++ fs/cifs/connect.c | 3 +-- fs/cifs/smb2pdu.c | 10 +++++++++- 3 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h index d7ac75e..bd97f2a 100644 --- a/fs/cifs/cifsproto.h +++ b/fs/cifs/cifsproto.h @@ -526,6 +526,8 @@ extern int E_md4hash(const unsigned char *passwd, unsigned char *p16, extern int SMBencrypt(unsigned char *passwd, const unsigned char *c8, unsigned char *p24); +extern void cifs_put_smb_ses(struct cifs_ses *ses); + void cifs_readdata_release(struct kref *refcount); int cifs_async_readv(struct cifs_readdata *rdata); int cifs_readv_receive(struct TCP_Server_Info *server, struct mid_q_entry *mid); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 7e85070..2e46a8a 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2732,8 +2732,7 @@ cifs_find_smb_ses(struct TCP_Server_Info *server, struct smb_vol *vol) return NULL; } -static void -cifs_put_smb_ses(struct cifs_ses *ses) +void cifs_put_smb_ses(struct cifs_ses *ses) { unsigned int rc, xid; struct TCP_Server_Info *server = ses->server; diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c index 30417d4..97995b2 100644 --- a/fs/cifs/smb2pdu.c +++ b/fs/cifs/smb2pdu.c @@ -2914,9 +2914,14 @@ void smb2_reconnect_server(struct work_struct *work) tcon_exist = true; } } + /* + * IPC has the same lifetime as its session and uses its + * refcount. + */ if (ses->tcon_ipc && ses->tcon_ipc->need_reconnect) { list_add_tail(&ses->tcon_ipc->rlist, &tmp_list); tcon_exist = true; + ses->ses_count++; } } /* @@ -2935,7 +2940,10 @@ void smb2_reconnect_server(struct work_struct *work) else resched = true; list_del_init(&tcon->rlist); - cifs_put_tcon(tcon); + if (tcon->ipc) + cifs_put_smb_ses(tcon->ses); + else + cifs_put_tcon(tcon); } cifs_dbg(FYI, "Reconnecting tcons finished\n"); -- 1.8.3.1

1 0

[PATCH 1/2] xfs: always init fdblocks in mount
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Zheng Bin <zhengbin13(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31088 CVE: NA --------------------------- Use fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 0, counted 3224 in ag 0 sb_fdblocks 3228, counted 3224 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, while in linux-next, sync not stuck. The reason is same to commit d0c7feaf8767 ("xfs: add agf freeblocks verify in xfs_agf_verify"), cause agf_longest is 0, we can not block this in xfs_agf_verify. Make sure fdblocks is always inited in mount(also init ifree, icount). xfs_mountfs xfs_check_summary_counts xfs_initialize_perag_data Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_ag_resv.c | 11 +++++++---- fs/xfs/xfs_mount.c | 33 --------------------------------- 2 files changed, 7 insertions(+), 37 deletions(-) diff --git a/fs/xfs/libxfs/xfs_ag_resv.c b/fs/xfs/libxfs/xfs_ag_resv.c index e2ba2a3..4f099fc 100644 --- a/fs/xfs/libxfs/xfs_ag_resv.c +++ b/fs/xfs/libxfs/xfs_ag_resv.c @@ -309,10 +309,13 @@ } #ifdef DEBUG - /* need to read in the AGF for the ASSERT below to work */ - error = xfs_alloc_pagf_init(pag->pag_mount, tp, pag->pag_agno, 0); - if (error) - return error; + if (!pag->pagf_init) { + /* need to read in the AGF for the ASSERT below to work */ + error = xfs_alloc_pagf_init(pag->pag_mount, tp, + pag->pag_agno, 0); + if (error) + return error; + } ASSERT(xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 02d1509..3af91e2 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -624,39 +624,6 @@ return -EFSCORRUPTED; } - /* - * Now the log is mounted, we know if it was an unclean shutdown or - * not. If it was, with the first phase of recovery has completed, we - * have consistent AG blocks on disk. We have not recovered EFIs yet, - * but they are recovered transactionally in the second recovery phase - * later. - * - * If the log was clean when we mounted, we can check the summary - * counters. If any of them are obviously incorrect, we can recompute - * them from the AGF headers in the next step. - */ - if (XFS_LAST_UNMOUNT_WAS_CLEAN(mp) && - (mp->m_sb.sb_fdblocks > mp->m_sb.sb_dblocks || - !xfs_verify_icount(mp, mp->m_sb.sb_icount) || - mp->m_sb.sb_ifree > mp->m_sb.sb_icount)) - mp->m_flags |= XFS_MOUNT_BAD_SUMMARY; - - /* - * We can safely re-initialise incore superblock counters from the - * per-ag data. These may not be correct if the filesystem was not - * cleanly unmounted, so we waited for recovery to finish before doing - * this. - * - * If the filesystem was cleanly unmounted or the previous check did - * not flag anything weird, then we can trust the values in the - * superblock to be correct and we don't need to do anything here. - * Otherwise, recalculate the summary counters. - */ - if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || - XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && - !(mp->m_flags & XFS_MOUNT_BAD_SUMMARY)) - return 0; - return xfs_initialize_perag_data(mp, mp->m_sb.sb_agcount); } -- 1.8.3

1 1

[PATCH] xfs: devirtualize ->sf_entsize and ->sf_nextentry
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-5.5-rc1 commit 50f6bb6b7aea8177110e55355c455f18912a7a73 category: bugfix bugzilla: 31596 CVE: NA --------------------------- Just check for file-type enabled directories directly. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Darrick J. Wong <darrick.wong(a)oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong(a)oracle.com> Conflicts: fs/xfs/libxfs/xfs_dir2_priv.h fs/xfs/libxfs/xfs_dir2_sf.c fs/xfs/xfs_dir2_readdir.c [zb: since patch 84915e1bdddf, 707e0ddaf67e, e91ec882af21, 04df34ac6494 not merged, adjust code] Signed-off-by: Zheng Bin <zhengbin13(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/xfs/libxfs/xfs_da_format.c | 48 --------------------- fs/xfs/libxfs/xfs_dir2.h | 4 -- fs/xfs/libxfs/xfs_dir2_block.c | 2 +- fs/xfs/libxfs/xfs_dir2_priv.h | 2 + fs/xfs/libxfs/xfs_dir2_sf.c | 96 +++++++++++++++++++++++++----------------- fs/xfs/xfs_dir2_readdir.c | 7 +-- 6 files changed, 64 insertions(+), 95 deletions(-) diff --git a/fs/xfs/libxfs/xfs_da_format.c b/fs/xfs/libxfs/xfs_da_format.c index b39053d..39c2610 100644 --- a/fs/xfs/libxfs/xfs_da_format.c +++ b/fs/xfs/libxfs/xfs_da_format.c @@ -18,48 +18,6 @@ #include "xfs_dir2_priv.h" /* - * Shortform directory ops - */ -static int -xfs_dir2_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - int count = sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ - - count += len; /* name */ - count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ - return count; -} - -static int -xfs_dir3_sf_entsize( - struct xfs_dir2_sf_hdr *hdr, - int len) -{ - return xfs_dir2_sf_entsize(hdr, len) + sizeof(uint8_t); -} - -static struct xfs_dir2_sf_entry * -xfs_dir2_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir2_sf_entsize(hdr, sfep->namelen)); -} - -static struct xfs_dir2_sf_entry * -xfs_dir3_sf_nextentry( - struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep) -{ - return (struct xfs_dir2_sf_entry *) - ((char *)sfep + xfs_dir3_sf_entsize(hdr, sfep->namelen)); -} - - -/* * For filetype enabled shortform directories, the file type field is stored at * the end of the name. Because it's only a single byte, endian conversion is * not necessary. For non-filetype enable directories, the type is always @@ -692,8 +650,6 @@ } static const struct xfs_dir_ops xfs_dir2_ops = { - .sf_entsize = xfs_dir2_sf_entsize, - .sf_nextentry = xfs_dir2_sf_nextentry, .sf_get_ftype = xfs_dir2_sfe_get_ftype, .sf_put_ftype = xfs_dir2_sfe_put_ftype, .sf_get_ino = xfs_dir2_sfe_get_ino, @@ -742,8 +698,6 @@ }; static const struct xfs_dir_ops xfs_dir2_ftype_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, @@ -792,8 +746,6 @@ }; static const struct xfs_dir_ops xfs_dir3_ops = { - .sf_entsize = xfs_dir3_sf_entsize, - .sf_nextentry = xfs_dir3_sf_nextentry, .sf_get_ftype = xfs_dir3_sfe_get_ftype, .sf_put_ftype = xfs_dir3_sfe_put_ftype, .sf_get_ino = xfs_dir3_sfe_get_ino, diff --git a/fs/xfs/libxfs/xfs_dir2.h b/fs/xfs/libxfs/xfs_dir2.h index c3e3f6b..155bae5 100644 --- a/fs/xfs/libxfs/xfs_dir2.h +++ b/fs/xfs/libxfs/xfs_dir2.h @@ -30,10 +30,6 @@ * directory operations vector for encode/decode routines */ struct xfs_dir_ops { - int (*sf_entsize)(struct xfs_dir2_sf_hdr *hdr, int len); - struct xfs_dir2_sf_entry * - (*sf_nextentry)(struct xfs_dir2_sf_hdr *hdr, - struct xfs_dir2_sf_entry *sfep); uint8_t (*sf_get_ftype)(struct xfs_dir2_sf_entry *sfep); void (*sf_put_ftype)(struct xfs_dir2_sf_entry *sfep, uint8_t ftype); diff --git a/fs/xfs/libxfs/xfs_dir2_block.c b/fs/xfs/libxfs/xfs_dir2_block.c index 30ed591..fdcf6aa 100644 --- a/fs/xfs/libxfs/xfs_dir2_block.c +++ b/fs/xfs/libxfs/xfs_dir2_block.c @@ -1235,7 +1235,7 @@ static int xfs_dir2_block_lookup_int(xfs_da_args_t *args, struct xfs_buf **bpp, if (++i == sfp->count) sfep = NULL; else - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* Done with the temporary buffer */ kmem_free(sfp); diff --git a/fs/xfs/libxfs/xfs_dir2_priv.h b/fs/xfs/libxfs/xfs_dir2_priv.h index 59f9fb2..655fb33 100644 --- a/fs/xfs/libxfs/xfs_dir2_priv.h +++ b/fs/xfs/libxfs/xfs_dir2_priv.h @@ -108,6 +108,8 @@ extern int xfs_dir2_free_read(struct xfs_trans *tp, struct xfs_inode *dp, xfs_dablk_t fbno, struct xfs_buf **bpp); /* xfs_dir2_sf.c */ +struct xfs_dir2_sf_entry *xfs_dir2_sf_nextentry(struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, struct xfs_dir2_sf_entry *sfep); extern int xfs_dir2_block_sfsize(struct xfs_inode *dp, struct xfs_dir2_data_hdr *block, struct xfs_dir2_sf_hdr *sfhp); extern int xfs_dir2_block_to_sf(struct xfs_da_args *args, struct xfs_buf *bp, diff --git a/fs/xfs/libxfs/xfs_dir2_sf.c b/fs/xfs/libxfs/xfs_dir2_sf.c index 585dfdb..716c8c5 100644 --- a/fs/xfs/libxfs/xfs_dir2_sf.c +++ b/fs/xfs/libxfs/xfs_dir2_sf.c @@ -40,6 +40,31 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, static void xfs_dir2_sf_toino4(xfs_da_args_t *args); static void xfs_dir2_sf_toino8(xfs_da_args_t *args); +static int +xfs_dir2_sf_entsize( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + int len) +{ + int count = len; + + count += sizeof(struct xfs_dir2_sf_entry); /* namelen + offset */ + count += hdr->i8count ? XFS_INO64_SIZE : XFS_INO32_SIZE; /* ino # */ + + if (xfs_sb_version_hasftype(&mp->m_sb)) + count += sizeof(uint8_t); + return count; +} + +struct xfs_dir2_sf_entry * +xfs_dir2_sf_nextentry( + struct xfs_mount *mp, + struct xfs_dir2_sf_hdr *hdr, + struct xfs_dir2_sf_entry *sfep) +{ + return (void *)sfep + xfs_dir2_sf_entsize(mp, hdr, sfep->namelen); +} + /* * Given a block directory (dp/block), calculate its size as a shortform (sf) * directory and a header for the sf directory, if it will fit it the @@ -222,7 +247,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, dp->d_ops->sf_put_ftype(sfep, dp->d_ops->data_get_ftype(dep)); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ptr += dp->d_ops->data_entsize(dep->namelen); } @@ -294,7 +319,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Compute entry (and change in) size. */ - incr_isize = dp->d_ops->sf_entsize(sfp, args->namelen); + incr_isize = xfs_dir2_sf_entsize(dp->i_mount, sfp, args->namelen); objchange = 0; /* @@ -367,18 +392,17 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_data_aoff_t offset, /* offset to use for new ent */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* byte offset in sf dir */ - xfs_inode_t *dp; /* incore directory inode */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; byteoff = (int)((char *)sfep - (char *)sfp); /* * Grow the in-inode space. */ - xfs_idata_realloc(dp, dp->d_ops->sf_entsize(sfp, args->namelen), + xfs_idata_realloc(dp, xfs_dir2_sf_entsize(mp, sfp, args->namelen), XFS_DATA_FORK); /* * Need to set up again due to realloc of the inode data. @@ -419,9 +443,10 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int objchange, /* changing inode number size */ int new_isize) /* new directory size */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int add_datasize; /* data size need for new ent */ char *buf; /* buffer for old */ - xfs_inode_t *dp; /* incore directory inode */ int eof; /* reached end of old dir */ int nbytes; /* temp for byte copies */ xfs_dir2_data_aoff_t new_offset; /* next offset value */ @@ -435,8 +460,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, /* * Copy the old directory to the stack buffer. */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; old_isize = (int)dp->i_d.di_size; buf = kmem_alloc(old_isize, KM_SLEEP); @@ -453,7 +476,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, eof = (char *)oldsfep == &buf[old_isize]; !eof; offset = new_offset + dp->d_ops->data_entsize(oldsfep->namelen), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep), eof = (char *)oldsfep == &buf[old_isize]) { new_offset = xfs_dir2_sf_get_offset(oldsfep); if (offset + add_datasize <= new_offset) @@ -491,7 +514,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * If there's more left to copy, do that. */ if (!eof) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); memcpy(sfep, oldsfep, old_isize - nbytes); } kmem_free(buf); @@ -513,7 +536,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_entry_t **sfepp, /* out(1): new entry ptr */ xfs_dir2_data_aoff_t *offsetp) /* out(1): new offset */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int holefit; /* found hole it will fit in */ int i; /* entry number */ xfs_dir2_data_aoff_t offset; /* data block offset */ @@ -522,8 +546,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, int size; /* entry's data size */ int used; /* data bytes used */ - dp = args->dp; - sfp = (xfs_dir2_sf_hdr_t *)dp->i_df.if_u1.if_data; size = dp->d_ops->data_entsize(args->namelen); offset = dp->d_ops->data_first_offset; @@ -539,7 +561,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, holefit = offset + size <= xfs_dir2_sf_get_offset(sfep); offset = xfs_dir2_sf_get_offset(sfep) + dp->d_ops->data_entsize(sfep->namelen); - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } /* * Calculate data bytes used excluding the new entry, if this @@ -598,7 +620,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(dp->i_mount, sfp, sfep)) { ASSERT(xfs_dir2_sf_get_offset(sfep) >= offset); ino = dp->d_ops->sf_get_ino(sfp, sfep); i8count += ino > XFS_DIR2_MAX_SHORT_INUM; @@ -683,7 +705,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * within the data buffer. The next entry starts after the * name component, so nextentry is an acceptable test. */ - next_sfep = dops->sf_nextentry(sfp, sfep); + next_sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); if (endp < (char *)next_sfep) return __this_address; @@ -782,7 +804,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_lookup( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ int error; xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ @@ -793,7 +816,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_lookup(args); xfs_dir2_sf_check(args); - dp = args->dp; ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* @@ -831,7 +853,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ ci_sfep = NULL; for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { /* * Compare name and if it's an exact match, return the inode * number. If it's the first case-insensitive match, store the @@ -867,8 +889,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_removename( xfs_da_args_t *args) { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int byteoff; /* offset of removed entry */ - xfs_inode_t *dp; /* incore directory inode */ int entsize; /* this entry's size */ int i; /* shortform entry index */ int newsize; /* new inode size */ @@ -878,8 +901,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_removename(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); oldsize = (int)dp->i_d.di_size; /* @@ -898,7 +919,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Find the one we're deleting. */ for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ASSERT(dp->d_ops->sf_get_ino(sfp, sfep) == @@ -915,7 +936,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, * Calculate sizes. */ byteoff = (int)((char *)sfep - (char *)sfp); - entsize = dp->d_ops->sf_entsize(sfp, args->namelen); + entsize = xfs_dir2_sf_entsize(mp, sfp, args->namelen); newsize = oldsize - entsize; /* * Copy the part if any after the removed entry, sliding it down. @@ -954,7 +975,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_replace( xfs_da_args_t *args) /* operation arguments */ { - xfs_inode_t *dp; /* incore directory inode */ + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; int i; /* entry index */ xfs_ino_t ino=0; /* entry old inode number */ int i8elevated; /* sf_toino8 set i8count=1 */ @@ -963,8 +985,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_replace(args); - dp = args->dp; - ASSERT(dp->i_df.if_flags & XFS_IFINLINE); /* * Bail out if the shortform directory is way too small. @@ -1020,7 +1040,7 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, */ else { for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep)) { if (xfs_da_compname(args, sfep->name, sfep->namelen) == XFS_CMP_EXACT) { ino = dp->d_ops->sf_get_ino(sfp, sfep); @@ -1079,8 +1099,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino4( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1091,8 +1112,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino4(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1126,8 +1145,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); @@ -1152,8 +1171,9 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, xfs_dir2_sf_toino8( xfs_da_args_t *args) /* operation arguments */ { + struct xfs_inode *dp = args->dp; + struct xfs_mount *mp = dp->i_mount; char *buf; /* old dir's buffer */ - xfs_inode_t *dp; /* incore directory inode */ int i; /* entry index */ int newsize; /* new inode size */ xfs_dir2_sf_entry_t *oldsfep; /* old sf entry */ @@ -1164,8 +1184,6 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, trace_xfs_dir2_sf_toino8(args); - dp = args->dp; - /* * Copy the old directory to the buffer. * Then nuke it from the inode, and add the new buffer to the inode. @@ -1199,8 +1217,8 @@ static int xfs_dir2_sf_addname_pick(xfs_da_args_t *args, int objchange, for (i = 0, sfep = xfs_dir2_sf_firstentry(sfp), oldsfep = xfs_dir2_sf_firstentry(oldsfp); i < sfp->count; - i++, sfep = dp->d_ops->sf_nextentry(sfp, sfep), - oldsfep = dp->d_ops->sf_nextentry(oldsfp, oldsfep)) { + i++, sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep), + oldsfep = xfs_dir2_sf_nextentry(mp, oldsfp, oldsfep)) { sfep->namelen = oldsfep->namelen; memcpy(sfep->offset, oldsfep->offset, sizeof(sfep->offset)); memcpy(sfep->name, oldsfep->name, sfep->namelen); diff --git a/fs/xfs/xfs_dir2_readdir.c b/fs/xfs/xfs_dir2_readdir.c index 5142e64..2ae98c2 100644 --- a/fs/xfs/xfs_dir2_readdir.c +++ b/fs/xfs/xfs_dir2_readdir.c @@ -50,6 +50,7 @@ { int i; /* shortform entry number */ struct xfs_inode *dp = args->dp; /* incore directory inode */ + struct xfs_mount *mp = dp->i_mount; xfs_dir2_dataptr_t off; /* current entry's offset */ xfs_dir2_sf_entry_t *sfep; /* shortform directory entry */ xfs_dir2_sf_hdr_t *sfp; /* shortform structure */ @@ -111,7 +112,7 @@ xfs_dir2_sf_get_offset(sfep)); if (ctx->pos > off) { - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); continue; } @@ -119,9 +120,9 @@ filetype = dp->d_ops->sf_get_ftype(sfep); ctx->pos = off & 0x7fffffff; if (!dir_emit(ctx, (char *)sfep->name, sfep->namelen, ino, - xfs_dir3_get_dtype(dp->i_mount, filetype))) + xfs_dir3_get_dtype(mp, filetype))) return 0; - sfep = dp->d_ops->sf_nextentry(sfp, sfep); + sfep = xfs_dir2_sf_nextentry(mp, sfp, sfep); } ctx->pos = xfs_dir2_db_off_to_dataptr(geo, geo->datablk + 1, 0) & -- 1.8.3

1 0

[PATCH 1/2] block: delete part_round_stats and switch to less precise counting
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Mikulas Patocka <mpatocka(a)redhat.com> mainline inclusion from mainline-5.0-rc1 commit 5b18b5a737600fd20ba2045f320d5926ebbf341a category: bugfix bugzilla: 31388 CVE: NA --------------------------- We want to convert to per-cpu in_flight counters. The function part_round_stats needs the in_flight counter every jiffy, it would be too costly to sum all the percpu variables every jiffy, so it must be deleted. part_round_stats is used to calculate two counters - time_in_queue and io_ticks. time_in_queue can be calculated without part_round_stats, by adding the duration of the I/O when the I/O ends (the value is almost as exact as the previously calculated value, except that time for in-progress I/Os is not counted). io_ticks can be approximated by increasing the value when I/O is started or ended and the jiffies value has changed. If the I/Os take less than a jiffy, the value is as exact as the previously calculated value. If the I/Os take more than a jiffy, io_ticks can drift behind the previously calculated value. Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Signed-off-by: Mike Snitzer <snitzer(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflict: block/bio.c block/blk-core.c block/blk-merge.c block/genhd.c include/linux/genhd.h Signed-off-by: Yufen Yu <yuyufen(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/bio.c | 23 ++++++++++++++++++++--- block/blk-core.c | 6 ++++-- block/blk-merge.c | 1 - block/genhd.c | 4 ---- block/partition-generic.c | 4 ---- include/linux/genhd.h | 1 + 6 files changed, 25 insertions(+), 14 deletions(-) diff --git a/block/bio.c b/block/bio.c index 3d7570553..48a8cf5 100644 --- a/block/bio.c +++ b/block/bio.c @@ -1668,13 +1668,28 @@ void bio_check_pages_dirty(struct bio *bio) } EXPORT_SYMBOL_GPL(bio_check_pages_dirty); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now) +{ + unsigned long stamp; +again: + stamp = READ_ONCE(part->stamp); + if (unlikely(stamp != now)) { + if (likely(cmpxchg(&part->stamp, stamp, now) == stamp)) + __part_stat_add(cpu, part, io_ticks, 1); + } + if (part->partno) { + part = &part_to_disk(part)->part0; + goto again; + } +} + void generic_start_io_acct(struct request_queue *q, int op, unsigned long sectors, struct hd_struct *part) { const int sgrp = op_stat_group(op); int cpu = part_stat_lock(); - part_round_stats(q, cpu, part); + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, sectors[sgrp], sectors); part_inc_in_flight(q, part, op_is_write(op)); @@ -1686,12 +1701,14 @@ void generic_start_io_acct(struct request_queue *q, int op, void generic_end_io_acct(struct request_queue *q, int req_op, struct hd_struct *part, unsigned long start_time) { - unsigned long duration = jiffies - start_time; + unsigned long now = jiffies; + unsigned long duration = now - start_time; const int sgrp = op_stat_group(req_op); int cpu = part_stat_lock(); + update_io_ticks(cpu, part, now); part_stat_add(cpu, part, nsecs[sgrp], jiffies_to_nsecs(duration)); - part_round_stats(q, cpu, part); + part_stat_add(cpu, part, time_in_queue, duration); part_dec_in_flight(q, part, op_is_write(req_op)); part_stat_unlock(); diff --git a/block/blk-core.c b/block/blk-core.c index b64dec2..d9e3ee6 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2740,9 +2740,10 @@ void blk_account_io_done(struct request *req, u64 now) cpu = part_stat_lock(); part = req->part; + update_io_ticks(cpu, part, jiffies); part_stat_inc(cpu, part, ios[sgrp]); part_stat_add(cpu, part, nsecs[sgrp], now - req->start_time_ns); - part_round_stats(req->q, cpu, part); + part_stat_add(cpu, part, time_in_queue, nsecs_to_jiffies64(now - req->start_time_ns)); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); @@ -2790,11 +2791,12 @@ void blk_account_io_start(struct request *rq, bool new_io) part_stat_inc(cpu, part, merges[rw]); } else { part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq)); - part_round_stats(rq->q, cpu, part); part_inc_in_flight(rq->q, part, rw); rq->part = part; } + update_io_ticks(cpu, part, jiffies); + part_stat_unlock(); } diff --git a/block/blk-merge.c b/block/blk-merge.c index 7efa8c3..044bff9 100644 --- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -656,7 +656,6 @@ static void blk_account_io_merge(struct request *req) cpu = part_stat_lock(); part = req->part; - part_round_stats(req->q, cpu, part); part_dec_in_flight(req->q, part, rq_data_dir(req)); hd_struct_put(part); diff --git a/block/genhd.c b/block/genhd.c index ff9d46d..862a2f3 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -1342,7 +1342,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) struct hd_struct *hd; char buf[BDEVNAME_SIZE]; unsigned int inflight[2]; - int cpu; /* if (&disk_to_dev(gp)->kobj.entry == block_class.devices.next) @@ -1354,9 +1353,6 @@ static int diskstats_show(struct seq_file *seqf, void *v) disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { - cpu = part_stat_lock(); - part_round_stats(gp->queue, cpu, hd); - part_stat_unlock(); part_in_flight(gp->queue, hd, inflight); seq_printf(seqf, "%4d %7d %s " "%lu %lu %lu %u " diff --git a/block/partition-generic.c b/block/partition-generic.c index 8ad6dca..d86d794 100644 --- a/block/partition-generic.c +++ b/block/partition-generic.c @@ -121,11 +121,7 @@ ssize_t part_stat_show(struct device *dev, struct hd_struct *p = dev_to_part(dev); struct request_queue *q = part_to_disk(p)->queue; unsigned int inflight[2]; - int cpu; - cpu = part_stat_lock(); - part_round_stats(q, cpu, p); - part_stat_unlock(); part_in_flight(q, p, inflight); return sprintf(buf, "%8lu %8lu %8llu %8u " diff --git a/include/linux/genhd.h b/include/linux/genhd.h index df0d01d..666b23a 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -422,6 +422,7 @@ static inline void free_part_info(struct hd_struct *part) /* block/blk-core.c */ extern void part_round_stats(struct request_queue *q, int cpu, struct hd_struct *part); +void update_io_ticks(int cpu, struct hd_struct *part, unsigned long now); /* block/genhd.c */ extern void device_add_disk(struct device *parent, struct gendisk *disk); -- 1.8.3

1 1

[PATCH] CIFS: Fix bug which the return value by asynchronous read is error
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Yilu Lin <linyilu(a)huawei.com> hulk inclusion category: bugfix bugzilla: 31384 CVE: NA ------------------------------------------------- This patch is used to fix the bug in collect_uncached_read_data() that rc is automatically converted from a signed number to an unsigned number when the CIFS asynchronous read fails. It will cause ctx->rc is error. Example: Share a directory and create a file on the Windows OS. Mount the directory to the Linux OS using CIFS. On the CIFS client of the Linux OS, invoke the pread interface to deliver the read request. The size of the read length plus offset of the read request is greater than the maximum file size. In this case, the CIFS server on the Windows OS returns a failure message (for example, the return value of smb2.nt_status is STATUS_INVALID_PARAMETER). After receiving the response message, the CIFS client parses smb2.nt_status to STATUS_INVALID_PARAMETER and converts it to the Linux error code (rdata->result=-22). Then the CIFS client invokes the collect_uncached_read_data function to assign the value of rdata->result to rc, that is, rc=rdata->result=-22. The type of the ctx->total_len variable is unsigned integer, the type of the rc variable is integer, and the type of the ctx->rc variable is ssize_t. Therefore, during the ternary operation, the value of rc is automatically converted to an unsigned number. The final result is ctx->rc=4294967274. However, the expected result is ctx->rc=-22. https://patchwork.kernel.org/patch/11444477/ Signed-off-by: Yilu Lin <linyilu(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/cifs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/file.c b/fs/cifs/file.c index e92513e..23b1098 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -3347,7 +3347,7 @@ ssize_t cifs_user_writev(struct kiocb *iocb, struct iov_iter *from) if (rc == -ENODATA) rc = 0; - ctx->rc = (rc == 0) ? ctx->total_len : rc; + ctx->rc = (rc == 0) ? (ssize_t)ctx->total_len : rc; mutex_unlock(&ctx->aio_mutex); -- 1.8.3

1 0

[PATCH 1/2] net/hinic: slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets.
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- slove the problem that VF may be disconnected when vm reboot and receive lots of broadcast packets. When vm is rebooting, VF receives lots of broadcast packects and VF may be disconnected. VF receives broadcast packect and VF driver will clear INTR_ON flag in setting msix process. Then VF driver will not enable interrupt if INTR_ON flag is set. As a result, VF will not process any hadware interrpt. In order to solve this problem, VF driver should be enable the interrpt first and then set msix state. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/ethernet/huawei/hinic/hinic_main.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 9b53a6f..b6da9fe 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -759,6 +759,8 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) goto req_tx_irq_err; } + set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); @@ -768,7 +770,6 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) hinic_set_msix_state(nic_dev->hwdev, irq_cfg->msix_entry_idx, HINIC_MSIX_ENABLE); - set_bit(HINIC_INTR_ON, &irq_cfg->intr_flag); } INIT_DELAYED_WORK(&nic_dev->moderation_task, -- 1.8.3

1 1

[PATCH] openeuler/config: disable CONFIG_EFI_VARS
by Yang Yingliang 18 Mar '20

18 Mar '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31390 CVE: NA Accessing sysfs-efivars interface '/sys/firmware/efi/vars' may have some problem. We can access the new efivarfs interface '/sys/firmware/efi/efivars' instead. So disable CONFIG_EFI_VARS and keep CONFIG_EFIVAR_FS enabled. Link: https://gitee.com/openeuler/kernel/issues/I1BN57 Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-by: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index a024ce2..9e6f560 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -580,10 +580,8 @@ CONFIG_HAVE_ARM_SMCCC=y # # EFI (Extensible Firmware Interface) Support # -CONFIG_EFI_VARS=y +#CONFIG_EFI_VARS is not set CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=y -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y CONFIG_EFI_PARAMS_FROM_FDT=y CONFIG_EFI_RUNTIME_WRAPPERS=y CONFIG_EFI_ARMSTUB=y -- 1.8.3

1 0

[PATCH] pagecache: support percpu refcount to imporve performance
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: pagecache percpu refcount bugzilla: 31398 CVE: NA ------------------------------------------------- The pagecache manages the file physical pages, and the life cycle of page is managed by atomic counting. With the increasing number of cpu cores, the cost of atomic counting is very large when reading file pagecaches at large concurrent. For example, when running nginx http application, the biggest hotspot is found in the atomic operation of find_get_entry(): 11.94% [kernel] [k] find_get_entry 7.45% [kernel] [k] do_tcp_sendpages 6.12% [kernel] [k] generic_file_buffered_read So we using the percpu refcount mechanism to fix this problem. and the test result show that the read performance of nginx http can be improved by 100%： worker original(requests/sec) percpu(requests/sec) imporve 64 759656.87 1627088.95 114.2% Notes: we use page->lru to save percpu information, so the pages with percpu attribute will not be recycled by memory recycling process, we should avoid grow the file size unlimited. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- fs/fcntl.c | 20 ++++++++++++ include/linux/mm.h | 23 +++++++++++++ include/linux/page-flags.h | 2 ++ include/linux/page_ref.h | 11 +++++++ include/linux/pagemap.h | 24 ++++++++++++++ include/trace/events/mmflags.h | 3 +- include/uapi/linux/fcntl.h | 2 ++ mm/filemap.c | 74 ++++++++++++++++++++++++++++++++++++++++-- mm/swap.c | 2 ++ 9 files changed, 158 insertions(+), 3 deletions(-) diff --git a/fs/fcntl.c b/fs/fcntl.c index 4137d96..0c70a8e 100644 --- a/fs/fcntl.c +++ b/fs/fcntl.c @@ -29,6 +29,7 @@ #include <linux/poll.h> #include <asm/siginfo.h> #include <linux/uaccess.h> +#include <linux/pagemap.h> #define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME) @@ -319,6 +320,22 @@ static long fcntl_rw_hint(struct file *file, unsigned int cmd, } } +static long fcntl_mapping_percpu(struct file *filp, unsigned int cmd, + unsigned long arg) +{ + struct address_space *mapping = filp->f_mapping; + unsigned long flag = arg; + + if (!mapping) + return -EINVAL; + + if (flag) + mapping_set_percpu_ref(mapping); + else + mapping_clear_percpu_ref(mapping); + return 0; +} + static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, struct file *filp) { @@ -426,6 +443,9 @@ static long do_fcntl(int fd, unsigned int cmd, unsigned long arg, case F_SET_FILE_RW_HINT: err = fcntl_rw_hint(filp, cmd, arg); break; + case F_MAPPING_PERCPU: + err = fcntl_mapping_percpu(filp, cmd, arg); + break; default: break; } diff --git a/include/linux/mm.h b/include/linux/mm.h index 65d91b1..0e173a4 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -528,6 +528,10 @@ static inline int pgd_devmap(pgd_t pgd) static inline int put_page_testzero(struct page *page) { VM_BUG_ON_PAGE(page_ref_count(page) == 0, page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return 0; + } return page_ref_dec_and_test(page); } @@ -539,6 +543,10 @@ static inline int put_page_testzero(struct page *page) */ static inline int get_page_unless_zero(struct page *page) { + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } return page_ref_add_unless(page, 1, 0); } @@ -928,6 +936,11 @@ static inline bool is_device_public_page(const struct page *page) static inline void get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return; + } /* * Getting a normal page or the head of a compound page * requires to already have an elevated page->_refcount. @@ -939,6 +952,11 @@ static inline void get_page(struct page *page) static inline __must_check bool try_get_page(struct page *page) { page = compound_head(page); + + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return true; + } if (WARN_ON_ONCE(page_ref_count(page) <= 0)) return false; page_ref_inc(page); @@ -949,6 +967,11 @@ static inline void put_page(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) { + percpu_ref_put(page_percpu_ref(page)); + return; + } + /* * For devmap managed pages we need to catch refcount transition from * 2 to 1, when refcount reach one it means the page is free and we diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 3f066ce..7eb776a 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -101,6 +101,7 @@ enum pageflags { PG_young, PG_idle, #endif + PG_percpu_ref, __NR_PAGEFLAGS, /* Filesystems */ @@ -385,6 +386,7 @@ static inline bool set_hwpoison_free_buddy_page(struct page *page) TESTCLEARFLAG(Young, young, PF_ANY) PAGEFLAG(Idle, idle, PF_ANY) #endif +PAGEFLAG(PercpuRef, percpu_ref, PF_ANY) /* * On an anonymous page mapped into a user virtual memory area, diff --git a/include/linux/page_ref.h b/include/linux/page_ref.h index 14d14be..3deab40 100644 --- a/include/linux/page_ref.h +++ b/include/linux/page_ref.h @@ -180,4 +180,15 @@ static inline void page_ref_unfreeze(struct page *page, int count) __page_ref_unfreeze(page, count); } +static inline struct percpu_ref *page_percpu_ref(struct page *page) +{ + return *(struct percpu_ref **)&page->lru; +} + +static inline void page_set_percpu_ref(struct page *page, + struct percpu_ref *ref) +{ + *(struct percpu_ref **)&page->lru = ref; +} + #endif diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h index 520627f..e889d99 100644 --- a/include/linux/pagemap.h +++ b/include/linux/pagemap.h @@ -29,6 +29,7 @@ enum mapping_flags { AS_EXITING = 4, /* final truncate in progress */ /* writeback related tags are not used */ AS_NO_WRITEBACK_TAGS = 5, + AS_PERCPU_REF = 6, /* percpu ref counter for special inode */ }; /** @@ -97,6 +98,21 @@ static inline int mapping_use_writeback_tags(struct address_space *mapping) return !test_bit(AS_NO_WRITEBACK_TAGS, &mapping->flags); } +static inline void mapping_set_percpu_ref(struct address_space *mapping) +{ + set_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline void mapping_clear_percpu_ref(struct address_space *mapping) +{ + clear_bit(AS_PERCPU_REF, &mapping->flags); +} + +static inline int mapping_percpu_ref(struct address_space *mapping) +{ + return test_bit(AS_PERCPU_REF, &mapping->flags); +} + static inline gfp_t mapping_gfp_mask(struct address_space * mapping) { return mapping->gfp_mask; @@ -170,6 +186,10 @@ static inline int page_cache_get_speculative(struct page *page) # ifdef CONFIG_PREEMPT_COUNT VM_BUG_ON(!in_atomic() && !irqs_disabled()); # endif + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } /* * Preempt must be disabled here - we rely on rcu_read_lock doing * this for us. @@ -183,6 +203,10 @@ static inline int page_cache_get_speculative(struct page *page) page_ref_inc(page); #else + if (PagePercpuRef(page)) { + percpu_ref_get(page_percpu_ref(page)); + return 1; + } if (unlikely(!get_page_unless_zero(page))) { /* * Either the page has been freed, or will be freed. diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h index a81cffb..2994f1c 100644 --- a/include/trace/events/mmflags.h +++ b/include/trace/events/mmflags.h @@ -104,7 +104,8 @@ IF_HAVE_PG_UNCACHED(PG_uncached, "uncached" ) \ IF_HAVE_PG_HWPOISON(PG_hwpoison, "hwpoison" ) \ IF_HAVE_PG_IDLE(PG_young, "young" ) \ -IF_HAVE_PG_IDLE(PG_idle, "idle" ) +IF_HAVE_PG_IDLE(PG_idle, "idle"), \ + {1UL << PG_percpu_ref, "percpu_ref" } #define show_page_flags(flags) \ (flags) ? __print_flags(flags, "|", \ diff --git a/include/uapi/linux/fcntl.h b/include/uapi/linux/fcntl.h index 6448cdd..6dcddf7 100644 --- a/include/uapi/linux/fcntl.h +++ b/include/uapi/linux/fcntl.h @@ -53,6 +53,8 @@ #define F_GET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 13) #define F_SET_FILE_RW_HINT (F_LINUX_SPECIFIC_BASE + 14) +#define F_MAPPING_PERCPU (F_LINUX_SPECIFIC_BASE + 15) + /* * Valid hint values for F_{GET,SET}_RW_HINT. 0 is "not set", or can be * used to clear any hints previously set. diff --git a/mm/filemap.c b/mm/filemap.c index c56c419..8a8bf78 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -48,6 +48,66 @@ #include <asm/mman.h> +struct percpu_page { + struct percpu_ref ref; + struct page *page; +}; + +static void free_page_ref(struct percpu_ref *ref) +{ + struct percpu_page *p = (struct percpu_page *)ref; + struct page *page = p->page; + + percpu_ref_exit(ref); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); + + ClearPagePercpuRef(page); + /* really free the page */ + put_page(page); +} + +static void page_cache_init(struct address_space *mapping, struct page *page) +{ + struct percpu_page *p; + + if (!mapping_percpu_ref(mapping)) + return; + + p = kzalloc(sizeof(struct percpu_page), GFP_KERNEL); + if (!p) + return; + if (percpu_ref_init(&p->ref, free_page_ref, 0, GFP_KERNEL)) + goto err; + + p->page = page; + page_set_percpu_ref(page, &p->ref); + SetPagePercpuRef(page); + get_page(page); + return; +err: + kfree(p); +} + +static void page_cache_exit(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + + put_page(page); + ClearPagePercpuRef(page); + percpu_ref_exit(page_percpu_ref(page)); + kfree(page_percpu_ref(page)); + page_set_percpu_ref(page, NULL); +} + +static void page_cache_kill(struct page *page) +{ + if (!PagePercpuRef(page)) + return; + percpu_ref_kill(page_percpu_ref(page)); +} + /* * Shared mappings implemented 30.11.1994. It's not fully working yet, * though. @@ -264,6 +324,7 @@ void __delete_from_page_cache(struct page *page, void *shadow) unaccount_page_cache_page(mapping, page); page_cache_tree_delete(mapping, page, shadow); + page_cache_kill(page); } static void page_cache_free_page(struct address_space *mapping, @@ -384,8 +445,10 @@ void delete_from_page_cache_batch(struct address_space *mapping, page_cache_tree_delete_batch(mapping, pvec); xa_unlock_irqrestore(&mapping->i_pages, flags); - for (i = 0; i < pagevec_count(pvec); i++) + for (i = 0; i < pagevec_count(pvec); i++) { + page_cache_kill(pvec->pages[i]); page_cache_free_page(mapping, pvec->pages[i]); + } } int filemap_check_errors(struct address_space *mapping) @@ -966,7 +1029,8 @@ int add_to_page_cache_lru(struct page *page, struct address_space *mapping, workingset_activation(page); } else ClearPageActive(page); - lru_cache_add(page); + if (!PagePercpuRef(page)) + lru_cache_add(page); } return ret; } @@ -1630,8 +1694,10 @@ struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset, if (fgp_flags & FGP_ACCESSED) __SetPageReferenced(page); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, offset, gfp_mask); if (unlikely(err)) { + page_cache_exit(page); put_page(page); page = NULL; if (err == -EEXIST) @@ -2320,9 +2386,11 @@ static ssize_t generic_file_buffered_read(struct kiocb *iocb, error = -ENOMEM; goto out; } + page_cache_init(mapping, page); error = add_to_page_cache_lru(page, mapping, index, mapping_gfp_constraint(mapping, GFP_KERNEL)); if (error) { + page_cache_exit(page); put_page(page); if (error == -EEXIST) { error = 0; @@ -2837,8 +2905,10 @@ static struct page *do_read_cache_page(struct address_space *mapping, page = __page_cache_alloc(gfp); if (!page) return ERR_PTR(-ENOMEM); + page_cache_init(mapping, page); err = add_to_page_cache_lru(page, mapping, index, gfp); if (unlikely(err)) { + page_cache_exit(page); put_page(page); if (err == -EEXIST) goto repeat; diff --git a/mm/swap.c b/mm/swap.c index 45fdbfb..320ac35 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -372,6 +372,8 @@ static void __lru_cache_activate_page(struct page *page) void mark_page_accessed(struct page *page) { page = compound_head(page); + if (PagePercpuRef(page)) + return; if (!PageActive(page) && !PageUnevictable(page) && PageReferenced(page)) { -- 1.8.3

1 0

[PATCH] arm64: mm: support setting page attributes for debugging
by Yang Yingliang 17 Mar '20

17 Mar '20

From: Yunfeng Ye <yeyunfeng(a)huawei.com> euleros inclusion category: feature feature: Memory debug feature ------------------------------------------------- When pagealloc debug is enabled, block mappings or contiguous hints are no longer used for linear address area. Therefore, support setting page attributes in this case is useful for debugging memory corruption problems. Signed-off-by: Yunfeng Ye <yeyunfeng(a)huawei.com> Reviewed-by: Kefeng Wang <wangkefeng.wang(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm64/mm/pageattr.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c index a5635937..3e398d0 100644 --- a/arch/arm64/mm/pageattr.c +++ b/arch/arm64/mm/pageattr.c @@ -87,8 +87,16 @@ static int change_memory_common(unsigned long addr, int numpages, area = find_vm_area((void *)addr); if (!area || end > (unsigned long)area->addr + area->size || - !(area->flags & VM_ALLOC)) + !(area->flags & VM_ALLOC)) { + /* + * When pagealloc debug is enabled, the linear address is + * mapped with NO_BLOCK_MAPPINGS and NO_CONT_MAPPINGS flags. + */ + if (numpages && debug_pagealloc_enabled()) + return __change_memory_common(start, size, + set_mask, clear_mask); return -EINVAL; + } if (!numpages) return 0; -- 1.8.3

1 0

[PATCH] staging: android: ashmem: Disallow ashmem memory from being remapped
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Suren Baghdasaryan <surenb(a)google.com> commit 6d67b0290b4b84c477e6a2fc6e005e174d3c7786 upstream. When ashmem file is mmapped, the resulting vma->vm_file points to the backing shmem file with the generic fops that do not check ashmem permissions like fops of ashmem do. If an mremap is done on the ashmem region, then the permission checks will be skipped. Fix that by disallowing mapping operation on the backing shmem file. Reported-by: Jann Horn <jannh(a)google.com> Signed-off-by: Suren Baghdasaryan <surenb(a)google.com> Cc: stable <stable(a)vger.kernel.org> # 4.4,4.9,4.14,4.18,5.4 Signed-off-by: Todd Kjos <tkjos(a)google.com> Reviewed-by: Joel Fernandes (Google) <joel(a)joelfernandes.org> Link: https://lore.kernel.org/r/20200127235616.48920-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/staging/android/ashmem.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/drivers/staging/android/ashmem.c b/drivers/staging/android/ashmem.c index be81533..e3df4bf 100644 --- a/drivers/staging/android/ashmem.c +++ b/drivers/staging/android/ashmem.c @@ -350,8 +350,23 @@ static inline vm_flags_t calc_vm_may_flags(unsigned long prot) _calc_vm_trans(prot, PROT_EXEC, VM_MAYEXEC); } +static int ashmem_vmfile_mmap(struct file *file, struct vm_area_struct *vma) +{ + /* do not allow to mmap ashmem backing shmem file directly */ + return -EPERM; +} + +static unsigned long +ashmem_vmfile_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, + unsigned long flags) +{ + return current->mm->get_unmapped_area(file, addr, len, pgoff, flags); +} + static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) { + static struct file_operations vmfile_fops; struct ashmem_area *asma = file->private_data; int ret = 0; @@ -392,6 +407,19 @@ static int ashmem_mmap(struct file *file, struct vm_area_struct *vma) } vmfile->f_mode |= FMODE_LSEEK; asma->file = vmfile; + /* + * override mmap operation of the vmfile so that it can't be + * remapped which would lead to creation of a new vma with no + * asma permission checks. Have to override get_unmapped_area + * as well to prevent VM_BUG_ON check for f_ops modification. + */ + if (!vmfile_fops.mmap) { + vmfile_fops = *vmfile->f_op; + vmfile_fops.mmap = ashmem_vmfile_mmap; + vmfile_fops.get_unmapped_area = + ashmem_vmfile_get_unmapped_area; + } + vmfile->f_op = &vmfile_fops; } get_file(asma->file); -- 1.8.3

1 0

[PATCH 0/2] more fixes about CVE-2020-8648
by Yang Yingliang 16 Mar '20

16 Mar '20

Jiri Slaby (2): vt: selection, push console lock down vt: selection, push sel_lock up drivers/tty/vt/selection.c | 27 ++++++++++++++++++--------- drivers/tty/vt/vt.c | 2 -- 2 files changed, 18 insertions(+), 11 deletions(-) -- 1.8.3

1 2

[PATCH] mm/resource: Return real error codes from walk failures
by Yang Yingliang 16 Mar '20

16 Mar '20

From: Dave Hansen <dave.hansen(a)linux.intel.com> mainline inclusion from mainline-v5.1-rc1 commit 5cd401ace914dc68556c6d2fcae0c349444d5f86 category: bugfix bugzilla: 17339 CVE: NA ------------------------------------------------- walk_system_ram_range() can return an error code either becuase *it* failed, or because the 'func' that it calls returned an error. The memory hotplug does the following: ret = walk_system_ram_range(..., func); if (ret) return ret; and 'ret' makes it out to userspace, eventually. The problem s, walk_system_ram_range() failues that result from *it* failing (as opposed to 'func') return -1. That leads to a very odd -EPERM (-1) return code out to userspace. Make walk_system_ram_range() return -EINVAL for internal failures to keep userspace less confused. This return code is compatible with all the callers that I audited. Signed-off-by: Dave Hansen <dave.hansen(a)linux.intel.com> Reviewed-by: Bjorn Helgaas <bhelgaas(a)google.com> Acked-by: Michael Ellerman <mpe(a)ellerman.id.au> (powerpc) Cc: Dan Williams <dan.j.williams(a)intel.com> Cc: Dave Jiang <dave.jiang(a)intel.com> Cc: Ross Zwisler <zwisler(a)kernel.org> Cc: Vishal Verma <vishal.l.verma(a)intel.com> Cc: Tom Lendacky <thomas.lendacky(a)amd.com> Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Michal Hocko <mhocko(a)suse.com> Cc: linux-nvdimm(a)lists.01.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: Huang Ying <ying.huang(a)intel.com> Cc: Fengguang Wu <fengguang.wu(a)intel.com> Cc: Borislav Petkov <bp(a)suse.de> Cc: Yaowei Bai <baiyaowei(a)cmss.chinamobile.com> Cc: Takashi Iwai <tiwai(a)suse.de> Cc: Jerome Glisse <jglisse(a)redhat.com> Cc: Benjamin Herrenschmidt <benh(a)kernel.crashing.org> Cc: Paul Mackerras <paulus(a)samba.org> Cc: linuxppc-dev(a)lists.ozlabs.org Cc: Keith Busch <keith.busch(a)intel.com> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> --- kernel/resource.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/resource.c b/kernel/resource.c index bce773c..7dd11c7 100644 --- a/kernel/resource.c +++ b/kernel/resource.c @@ -377,7 +377,7 @@ static int __walk_iomem_res_desc(resource_size_t start, resource_size_t end, int (*func)(struct resource *, void *)) { struct resource res; - int ret = -1; + int ret = -EINVAL; while (start < end && !find_next_iomem_res(start, end, flags, desc, @@ -456,7 +456,7 @@ int walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages, unsigned long flags; struct resource res; unsigned long pfn, end_pfn; - int ret = -1; + int ret = -EINVAL; start = (u64) start_pfn << PAGE_SHIFT; end = ((u64)(start_pfn + nr_pages) << PAGE_SHIFT) - 1; -- 1.8.3

1 0

[PATCH 0/2] fixes CVE-2020-1749
by Yang Yingliang 16 Mar '20

16 Mar '20

1 2

[PATCH] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- arch/x86/configs/openeuler_defconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig index f5579a2..4dd4540 100644 --- a/arch/x86/configs/openeuler_defconfig +++ b/arch/x86/configs/openeuler_defconfig @@ -2181,7 +2181,7 @@ CONFIG_VMWARE_PVSCSI=m CONFIG_HYPERV_STORAGE=m CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m CONFIG_FCOE_FNIC=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set -- 2.7.4

1 0

[PATCH hulk-4.19-next] openeuler/config: enable CONFIG_FCOE
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA The fcoe service failed to start because we did not enable CONFIG_FCOE just enable it. Link: https://gitee.com/open_euler/dashboard?issue_id=I1B9O9 Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3e0e9a3 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -2124,7 +2124,7 @@ CONFIG_SCSI_SMARTPQI=m # CONFIG_SCSI_HPTIOP is not set CONFIG_LIBFC=m CONFIG_LIBFCOE=m -# CONFIG_FCOE is not set +CONFIG_FCOE=m # CONFIG_SCSI_SNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_IPS is not set -- 2.7.4

1 0

[PATCH] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH 0/4] update hns3 driver
by Yang Yingliang 14 Mar '20

14 Mar '20

shenhao (4): net: hns3: adds support for extended VLAN mode and 'QOS' in vlan 802.1Q protocol. net: hns3: Increase vlan tag0 when close the port_base_vlan net: hns3: add dumping vlan filter config in debugfs net: hns3: update the number of version drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_debugfs.c | 1 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.c | 3 + drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 3 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 2 + .../ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c | 57 ++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 288 ++++++++++++++++----- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 11 +- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c | 9 - .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 + .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- 13 files changed, 311 insertions(+), 80 deletions(-) -- 1.8.3

1 4

[PATCH hulk-4.19-next] openeuler/config: disable unused debug config
by Cheng Jian 14 Mar '20

14 Mar '20

hulk inclusion category: config bugzilla: 28204 CVE: NA Two config option confirmations are not needed. CONFIG_VIDEO_ADV_DEBUG CONFIG_INFINIBAND_IPOIB_DEBUG So removed them from openeuler config Signed-off-by: Cheng Jian <cj.chengjian(a)huawei.com> --- arch/arm64/configs/openeuler_defconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/configs/openeuler_defconfig b/arch/arm64/configs/openeuler_defconfig index 6717b7b..3b94cfa 100644 --- a/arch/arm64/configs/openeuler_defconfig +++ b/arch/arm64/configs/openeuler_defconfig @@ -3693,7 +3693,7 @@ CONFIG_MEDIA_CONTROLLER=y CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2_SUBDEV_API=y CONFIG_VIDEO_V4L2=m -CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_ADV_DEBUG is not set CONFIG_VIDEO_FIXED_MINOR_RANGES=y # CONFIG_V4L2_FLASH_LED_CLASS is not set @@ -4630,7 +4630,7 @@ CONFIG_INFINIBAND_HNS_HIP08=m # CONFIG_INFINIBAND_HNS_TEST is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_CM=y -CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG is not set # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m -- 2.7.4

1 0

[PATCH] net/hinic: driver code compliance rectification
by Yang Yingliang 12 Mar '20

12 Mar '20

From: Shaozhengchao <shaozhengchao(a)huawei.com> driver inclusion category:bugfix bugzilla:4472 CVE:NA ----------------------------------------------------------------------- hinic driver code compliance rectification. 1.Process return value of snprintf and sscanf function. 2.Modify devil number. Signed-off-by: Shaozhengchao <shaozhengchao(a)huawei.com> Reviewed-by: Luoshaokai <luoshaokai(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- .../net/ethernet/huawei/hinic/hinic_dbgtool_knl.c | 4 +- drivers/net/ethernet/huawei/hinic/hinic_eqs.c | 24 +++++++--- drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 56 +++++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_hwdev.c | 53 ++++++++++++++------ drivers/net/ethernet/huawei/hinic/hinic_lld.c | 48 ++++++++++++++----- drivers/net/ethernet/huawei/hinic/hinic_main.c | 11 ++++- drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c | 8 +++- drivers/net/ethernet/huawei/hinic/hinic_nictool.c | 12 +++-- 8 files changed, 165 insertions(+), 51 deletions(-) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c index 1c9c469..535f41a 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_dbgtool_knl.c @@ -768,7 +768,7 @@ int dbgtool_knl_init(void *vhwdev, void *chip_node) sema_init(&dbgtool_info->dbgtool_sem, 1); ret = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (ret < 0) { + if (ret <= 0) { pr_err("Failed to get hinic id\n"); goto sscanf_chdev_fail; } @@ -874,7 +874,7 @@ void dbgtool_knl_deinit(void *vhwdev, void *chip_node) return; err = sscanf(chip_info->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); g_card_node_array[id] = NULL; diff --git a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c index 4b2b0c0..3fee9fb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_eqs.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_eqs.c @@ -1133,15 +1133,27 @@ static int init_eq(struct hinic_eq *eq, struct hinic_hwdev *hwdev, u16 q_id, } if (type == HINIC_AEQ) { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_aeq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_aeq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, aeq_interrupt, 0UL, eq->irq_name, eq); } else { - snprintf(eq->irq_name, sizeof(eq->irq_name), - "hinic_ceq%d@pci:%s", eq->q_id, - pci_name(hwdev->pcidev_hdl)); + err = snprintf(eq->irq_name, sizeof(eq->irq_name), + "hinic_ceq%d@pci:%s", eq->q_id, + pci_name(hwdev->pcidev_hdl)); + if (err <= 0 || err >= (int)sizeof(eq->irq_name)) { + pr_err("Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(eq->irq_name)); + err = -EINVAL; + goto req_irq_err; + } err = request_irq(entry->irq_id, ceq_interrupt, 0UL, eq->irq_name, eq); } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c index 37d8d38..ac711da 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_ethtool.c @@ -294,12 +294,15 @@ u32 hinic_get_io_stats_size(struct hinic_nic_dev *nic_dev) } #define QUEUE_STATS_PACK(items, item_idx, array, stats_ptr, qid) { \ - int j; \ + int j, err; \ for (j = 0; j < ARRAY_LEN(array); j++) { \ memcpy((items)[item_idx].name, (array)[j].name, \ HINIC_SHOW_ITEM_LEN); \ - snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN, \ + err = snprintf((items)[item_idx].name, HINIC_SHOW_ITEM_LEN,\ (array)[j].name, (qid)); \ + if (err <= 0 || err >= HINIC_SHOW_ITEM_LEN) \ + pr_err("Failed snprintf: func_ret(%d), dest_len(%d)\n",\ + err, HINIC_SHOW_ITEM_LEN); \ (items)[item_idx].hexadecimal = 0; \ (items)[item_idx].value = \ GET_VALUE_OF_PTR((array)[j].size, \ @@ -335,6 +338,8 @@ void hinic_get_io_stats(struct hinic_nic_dev *nic_dev, #define LP_DEFAULT_TIME (5) /* seconds */ #define LP_PKT_LEN (1514) +#define OBJ_STR_MAX_LEN (32) +#define SET_LINK_STR_MAX_LEN (128) #define PORT_DOWN_ERR_IDX 0 enum diag_test_index { @@ -743,16 +748,28 @@ static int hinic_set_settings_to_hw(struct hinic_nic_dev *nic_dev, struct net_device *netdev = nic_dev->netdev; struct hinic_link_ksettings settings = {0}; enum nic_speed_level speed_level = 0; - char set_link_str[128] = {0}; + char set_link_str[SET_LINK_STR_MAX_LEN] = {0}; int err = 0; - snprintf(set_link_str, sizeof(set_link_str), "%s", - (set_settings & HILINK_LINK_SET_AUTONEG) ? - (autoneg ? "autong enable " : "autong disable ") : ""); + err = snprintf(set_link_str, sizeof(set_link_str), "%s", + (set_settings & HILINK_LINK_SET_AUTONEG) ? + (autoneg ? "autong enable " : "autong disable ") : ""); + if (err < 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link state, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } if (set_settings & HILINK_LINK_SET_SPEED) { speed_level = hinic_ethtool_to_hw_speed_level(speed); - snprintf(set_link_str, sizeof(set_link_str), - "%sspeed %d ", set_link_str, speed); + err = snprintf(set_link_str, sizeof(set_link_str), + "%sspeed %d ", set_link_str, speed); + if (err <= 0 || err >= SET_LINK_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf link speed, function return(%d) and dest_len(%d)\n", + err, SET_LINK_STR_MAX_LEN); + return -EFAULT; + } } settings.valid_bitmap = set_settings; @@ -883,7 +900,12 @@ static void hinic_get_drvinfo(struct net_device *netdev, return; } - snprintf(info->fw_version, sizeof(info->fw_version), "%s", mgmt_ver); + err = snprintf(info->fw_version, sizeof(info->fw_version), + "%s", mgmt_ver); + if (err <= 0 || err >= (int)sizeof(info->fw_version)) + nicif_err(nic_dev, drv, netdev, + "Failed snprintf fw_version, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(info->fw_version)); } static u32 hinic_get_msglevel(struct net_device *netdev) @@ -1429,10 +1451,22 @@ static int __hinic_set_coalesce(struct net_device *netdev, if (queue == COALESCE_ALL_QUEUE) { ori_intr_coal = &nic_dev->intr_coalesce[0]; - snprintf(obj_str, sizeof(obj_str), "for netdev"); + err = snprintf(obj_str, sizeof(obj_str), "for netdev"); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } else { ori_intr_coal = &nic_dev->intr_coalesce[queue]; - snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + err = snprintf(obj_str, sizeof(obj_str), "for queue %d", queue); + if (err <= 0 || err >= OBJ_STR_MAX_LEN) { + nicif_err(nic_dev, drv, netdev, + "Failed snprintf string, function return(%d) and dest_len(%d)\n", + err, OBJ_STR_MAX_LEN); + return -EFAULT; + } } CHECK_COALESCE_CHANGED(coal, rx_coalesce_usecs, COALESCE_TIMER_CFG_UNIT, ori_intr_coal->coalesce_timer_cfg, obj_str); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c index a31bb6c..c2454f6 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hwdev.c @@ -519,6 +519,9 @@ static inline void __set_heartbeat_ehd_detect_delay(struct hinic_hwdev *hwdev, #define HINIC_QUEUE_MAX_DEPTH 12 #define HINIC_MAX_RX_BUFFER_SIZE 15 +#define CAP_INFO_MAC_LEN 512 +#define VENDOR_MAX_LEN 17 + static bool check_root_ctxt(struct hinic_hwdev *hwdev, u16 func_idx, void *buf_in, u16 in_size) { @@ -3891,6 +3894,7 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, char tmp_vendor[17] = {0}; char *port_type = "Unknown port type"; int i; + int err = 0; if (info->cable_absent) { sdk_info(hwdev->dev_hdl, "Cable unpresent\n"); @@ -3918,24 +3922,45 @@ static void __print_cable_info(struct hinic_hwdev *hwdev, memcpy(tmp_vendor, info->vendor_name, sizeof(info->vendor_name)); - snprintf(tmp_str, sizeof(tmp_str) - 1, - "Vendor: %s, %s, length: %um, max_speed: %uGbps", - tmp_vendor, port_type, info->cable_length, - info->cable_max_speed); + err = snprintf(tmp_str, sizeof(tmp_str), + "Vendor: %s, %s, length: %um, max_speed: %uGbps", + tmp_vendor, port_type, info->cable_length, + info->cable_max_speed); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable vendor info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->port_type == LINK_PORT_FIBRE || info->port_type == LINK_PORT_AOC) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, %s, Temperature: %u", tmp_str, - info->sfp_type ? "SFP" : "QSFP", info->cable_temp); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, %s, Temperature: %u", tmp_str, + info->sfp_type ? "SFP" : "QSFP", + info->cable_temp); + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf cable Temp, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; + } + if (info->sfp_type) { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuW, tx power: %uuW", - tmp_str, info->power[0], info->power[1]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuW, tx power: %uuW", + tmp_str, info->power[0], info->power[1]); } else { - snprintf(tmp_str, sizeof(tmp_str) - 1, - "%s, rx power: %uuw %uuW %uuW %uuW", - tmp_str, info->power[0], info->power[1], - info->power[2], info->power[3]); + err = snprintf(tmp_str, sizeof(tmp_str), + "%s, rx power: %uuw %uuW %uuW %uuW", + tmp_str, info->power[0], info->power[1], + info->power[2], info->power[3]); + } + if (err <= 0 || err >= CAP_INFO_MAC_LEN) { + sdk_err(hwdev->dev_hdl, + "Failed snprintf power info, function return(%d) and dest_len(%d)\n", + err, CAP_INFO_MAC_LEN); + return; } } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_lld.c b/drivers/net/ethernet/huawei/hinic/hinic_lld.c index 357e050..8a2f280 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_lld.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_lld.c @@ -629,6 +629,7 @@ static void hinic_ignore_minor_version(char *version) { char ver_split[MAX_VER_SPLIT_NUM][MAX_VER_FIELD_LEN] = { {0} }; int max_ver_len, split_num = 0; + int err; __version_split(version, &split_num, ver_split); if (split_num != MAX_VER_SPLIT_NUM) @@ -637,8 +638,11 @@ static void hinic_ignore_minor_version(char *version) max_ver_len = (int)strlen(version) + 1; memset(version, 0, max_ver_len); - snprintf(version, max_ver_len, "%s.%s.%s.0", - ver_split[0], ver_split[1], ver_split[2]); + err = snprintf(version, max_ver_len, "%s.%s.%s.0", + ver_split[0], ver_split[1], ver_split[2]); + if (err <= 0 || err >= max_ver_len) + pr_err("Failed snprintf version, function return(%d) and dest_len(%d)\n", + err, max_ver_len); } static int hinic_detect_version_compatible(struct hinic_pcidev *pcidev) @@ -1152,7 +1156,7 @@ void hinic_get_all_chip_id(void *id_info) lld_dev_hold(); list_for_each_entry(chip_node, &g_hinic_chip_list, node) { err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) + if (err <= 0) pr_err("Failed to get hinic id\n"); card_id->id[i] = id; @@ -1895,6 +1899,7 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) struct card_node *chip_node; unsigned char i; unsigned char parent_bus_number = 0; + int err; if (!pci_is_root_bus(pci_adapter->pcidev->bus)) parent_bus_number = pci_adapter->pcidev->bus->parent->number; @@ -1931,27 +1936,39 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) chip_node = kzalloc(sizeof(*chip_node), GFP_KERNEL); if (!chip_node) { - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc chip node\n"); - return -ENOMEM; + goto alloc_chip_err; } chip_node->dbgtool_attr_file.name = kzalloc(IFNAMSIZ, GFP_KERNEL); if (!(chip_node->dbgtool_attr_file.name)) { - kfree(chip_node); - card_bit_map = CLEAR_BIT(card_bit_map, i); sdk_err(&pci_adapter->pcidev->dev, "Failed to alloc dbgtool attr file name\n"); - return -ENOMEM; + goto alloc_dbgtool_attr_file_err; } /* parent bus number */ chip_node->dp_bus_num = parent_bus_number; - snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); - snprintf((char *)chip_node->dbgtool_attr_file.name, - IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + err = snprintf(chip_node->chip_name, IFNAMSIZ, "%s%d", + HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf chip_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + + err = snprintf((char *)chip_node->dbgtool_attr_file.name, + IFNAMSIZ, "%s%d", HINIC_CHIP_NAME, i); + if (err <= 0 || err >= IFNAMSIZ) { + sdk_err(&pci_adapter->pcidev->dev, + "Failed snprintf dbgtool_attr_file_name, function return(%d) and dest_len(%d)\n", + err, IFNAMSIZ); + goto alloc_dbgtool_attr_file_err; + } + sdk_info(&pci_adapter->pcidev->dev, "Add new chip %s to global list succeed\n", chip_node->chip_name); @@ -1962,6 +1979,13 @@ static int alloc_chip_node(struct hinic_pcidev *pci_adapter) pci_adapter->chip_node = chip_node; return 0; + +alloc_dbgtool_attr_file_err: + kfree(chip_node); + +alloc_chip_err: + card_bit_map = CLEAR_BIT(card_bit_map, i); + return -ENOMEM; } static void free_chip_node(struct hinic_pcidev *pci_adapter) @@ -1976,7 +2000,7 @@ static void free_chip_node(struct hinic_pcidev *pci_adapter) "Delete chip %s from global list succeed\n", chip_node->chip_name); err = sscanf(chip_node->chip_name, HINIC_CHIP_NAME "%u", &id); - if (err < 0) + if (err <= 0) sdk_err(&pci_adapter->pcidev->dev, "Failed to get hinic id\n"); card_bit_map = CLEAR_BIT(card_bit_map, id); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_main.c b/drivers/net/ethernet/huawei/hinic/hinic_main.c index 5960603..9b53a6f 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_main.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_main.c @@ -750,8 +750,15 @@ static int hinic_qps_irq_init(struct hinic_nic_dev *nic_dev) cpumask_set_cpu(local_cpu, &irq_cfg->affinity_mask); } - snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), - "%s_qp%d", nic_dev->netdev->name, q_id); + err = snprintf(irq_cfg->irq_name, sizeof(irq_cfg->irq_name), + "%s_qp%d", nic_dev->netdev->name, q_id); + if (err <= 0 || err >= (int)sizeof(irq_cfg->irq_name)) { + nic_err(&pdev->dev, + "Failed snprintf irq_name, function return(%d) and dest_len(%d)\n", + err, (int)sizeof(irq_cfg->irq_name)); + goto req_tx_irq_err; + } + err = hinic_request_irq(irq_cfg, q_id); if (err) { nicif_err(nic_dev, drv, nic_dev->netdev, "Failed to request Rx irq\n"); diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c index 8d89d30..cac0cdb 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nic_cfg.c @@ -2175,7 +2175,13 @@ int hinic_get_mgmt_version(void *hwdev, u8 *mgmt_ver) return -EINVAL; } - snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + err = snprintf(mgmt_ver, HINIC_MGMT_VERSION_MAX_LEN, "%s", up_ver.ver); + if (err <= 0 || err >= HINIC_MGMT_VERSION_MAX_LEN) { + nic_err(dev->dev_hdl, + "Failed snprintf fw version, function return(%d) and dest_len(%d)\n", + err, HINIC_MGMT_VERSION_MAX_LEN); + return -EINVAL; + } return 0; } diff --git a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c index 9a2cb00..46dd9ec 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_nictool.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_nictool.c @@ -1179,14 +1179,20 @@ static int get_drv_version(void *hwdev, void *buf_in, u32 in_size, { struct drv_version_info *ver_info; char ver_str[MAX_VER_INFO_LEN] = {0}; + int err; if (*out_size != sizeof(*ver_info)) { pr_err("Unexpect out buf size from user :%d, expect: %lu\n", *out_size, sizeof(*ver_info)); return -EFAULT; } - snprintf(ver_str, sizeof(ver_str), "%s [compiled with the kernel]", - HINIC_DRV_VERSION); + err = snprintf(ver_str, sizeof(ver_str), + "%s [compiled with the kernel]", HINIC_DRV_VERSION); + if (err <= 0 || err >= MAX_VER_INFO_LEN) { + pr_err("Failed snprintf driver version, function return(%d) and dest_len(%d)\n", + err, MAX_VER_INFO_LEN); + return -EFAULT; + } ver_info = (struct drv_version_info *)buf_out; memcpy(ver_info->ver, ver_str, sizeof(ver_str)); @@ -1420,7 +1426,7 @@ static int get_card_func_info(char *dev_name, struct msg_module *nt_msg) } err = sscanf(dev_name, HINIC_CHIP_NAME "%d", &id); - if (err < 0) { + if (err <= 0) { pr_err("Failed to get hinic id\n"); return err; } -- 1.8.3

1 0

[PATCH 0/3] update hinic and hns3 driver
by Yang Yingliang 12 Mar '20

12 Mar '20

Shaozhengchao (1): net/hinic: Solve the problem that the network card hangs when receiving the skb which frag_size=0 Shengzui You (2): net: hns3: update hns3 version to 1.9.37.1 net: hns3: adds support for reading module eeprom info drivers/net/ethernet/hisilicon/hns3/hnae3.h | 6 +- .../hisilicon/hns3/hns3_cae/hns3_cae_version.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_enet.h | 2 +- drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c | 79 ++++++++++++++++ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.h | 15 +++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 102 +++++++++++++++++++++ .../ethernet/hisilicon/hns3/hns3pf/hclge_main.h | 2 +- .../ethernet/hisilicon/hns3/hns3vf/hclgevf_main.h | 2 +- drivers/net/ethernet/hisilicon/hns3/kcompat.h | 10 ++ drivers/net/ethernet/huawei/hinic/hinic_ethtool.c | 1 + drivers/net/ethernet/huawei/hinic/hinic_tx.c | 65 ++++++++++--- drivers/net/ethernet/huawei/hinic/hinic_tx.h | 2 + 12 files changed, 269 insertions(+), 19 deletions(-) -- 1.8.3

1 3

[PATCH 0/5] fixes some CVE and bug
by Yang Yingliang 12 Mar '20

12 Mar '20

Cengiz Can (1): blktrace: fix dereference after null check Jan Kara (1): blktrace: Protect q->blk_trace with RCU Qu Wenruo (1): btrfs: tree-checker: Remove comprehensive root owner check Zhang Xiaoxu (1): vgacon: Fix a UAF in vgacon_invert_region Zheng Bin (1): xfs: add agf freeblocks verify in xfs_agf_verify drivers/video/console/vgacon.c | 3 ++ fs/btrfs/tree-checker.c | 24 --------- fs/xfs/libxfs/xfs_alloc.c | 16 ++++++ include/linux/blkdev.h | 2 +- include/linux/blktrace_api.h | 18 +++++-- kernel/trace/blktrace.c | 120 ++++++++++++++++++++++++++++++----------- 6 files changed, 122 insertions(+), 61 deletions(-) -- 1.8.3

1 5

[PATCH] vgacon: Fix a UAF in vgacon_invert_region
by Yang Yingliang 11 Mar '20

11 Mar '20

From: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> mainline inclusion from mainline-v5.6-rc4 commit 513dc792d6060d5ef572e43852683097a8420f56 category: bugfix bugzilla: 13690 CVE: CVE-2020-8647, CVE-2020-8649 ------------------------------------------------- When syzkaller tests, there is a UAF: BUG: KASan: use after free in vgacon_invert_region+0x9d/0x110 at addr ffff880000100000 Read of size 2 by task syz-executor.1/16489 page:ffffea0000004000 count:0 mapcount:-127 mapping: (null) index:0x0 page flags: 0xfffff00000000() page dumped because: kasan: bad access detected CPU: 1 PID: 16489 Comm: syz-executor.1 Not tainted Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: [<ffffffffb119f309>] dump_stack+0x1e/0x20 [<ffffffffb04af957>] kasan_report+0x577/0x950 [<ffffffffb04ae652>] __asan_load2+0x62/0x80 [<ffffffffb090f26d>] vgacon_invert_region+0x9d/0x110 [<ffffffffb0a39d95>] invert_screen+0xe5/0x470 [<ffffffffb0a21dcb>] set_selection+0x44b/0x12f0 [<ffffffffb0a3bfae>] tioclinux+0xee/0x490 [<ffffffffb0a1d114>] vt_ioctl+0xff4/0x2670 [<ffffffffb0a0089a>] tty_ioctl+0x46a/0x1a10 [<ffffffffb052db3d>] do_vfs_ioctl+0x5bd/0xc40 [<ffffffffb052e2f2>] SyS_ioctl+0x132/0x170 [<ffffffffb11c9b1b>] system_call_fastpath+0x22/0x27 Memory state around the buggy address: ffff8800000fff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff8800000fff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff880000100000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff It can be reproduce in the linux mainline by the program: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <linux/vt.h> struct tiocl_selection { unsigned short xs; /* X start */ unsigned short ys; /* Y start */ unsigned short xe; /* X end */ unsigned short ye; /* Y end */ unsigned short sel_mode; /* selection mode */ }; #define TIOCL_SETSEL 2 struct tiocl { unsigned char type; unsigned char pad; struct tiocl_selection sel; }; int main() { int fd = 0; const char *dev = "/dev/char/4:1"; struct vt_consize v = {0}; struct tiocl tioc = {0}; fd = open(dev, O_RDWR, 0); v.v_rows = 3346; ioctl(fd, VT_RESIZEX, &v); tioc.type = TIOCL_SETSEL; ioctl(fd, TIOCLINUX, &tioc); return 0; } When resize the screen, update the 'vc->vc_size_row' to the new_row_size, but when 'set_origin' in 'vgacon_set_origin', vgacon use 'vga_vram_base' for 'vc_origin' and 'vc_visible_origin', not 'vc_screenbuf'. It maybe smaller than 'vc_screenbuf'. When TIOCLINUX, use the new_row_size to calc the offset, it maybe larger than the vga_vram_size in vgacon driver, then bad access. Also, if set an larger screenbuf firstly, then set an more larger screenbuf, when copy old_origin to new_origin, a bad access may happen. So, If the screen size larger than vga_vram, resize screen should be failed. This alse fix CVE-2020-8649 and CVE-2020-8647. Linus pointed out that overflow checking seems absent. We're saved by the existing bounds checks in vc_do_resize() with rather strict limits: if (cols > VC_RESIZE_MAXCOL || lines > VC_RESIZE_MAXROW) return -EINVAL; Fixes: 0aec4867dca14 ("[PATCH] SVGATextMode fix") Reference: CVE-2020-8647 and CVE-2020-8649 Reported-by: Hulk Robot <hulkci(a)huawei.com> Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> [danvet: augment commit message to point out overflow safety] Cc: stable(a)vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter(a)ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200304022429.37738-1-zhangx… Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Zhang Xiaoxu <zhangxiaoxu5(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/video/console/vgacon.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index c6b3bdb..bfaa9ec 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -1316,6 +1316,9 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font) static int vgacon_resize(struct vc_data *c, unsigned int width, unsigned int height, unsigned int user) { + if ((width << 1) * height > vga_vram_size) + return -EINVAL; + if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ c->vc_font.height) -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.8.3

1 0

[PATCH] relay: handle alloc_percpu returning NULL in relay_open
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-19462 ------------------------------------------------- alloc_percpu() may return NULL, which means chan->buf may be set to NULL. In that case, when we do *per_cpu_ptr(chan->buf, ...), we dereference an invalid pointer: BUG: Unable to handle kernel data access at 0x7dae0000 Faulting instruction address: 0xc0000000003f3fec ... NIP [c0000000003f3fec] relay_open+0x29c/0x600 LR [c0000000003f3fc0] relay_open+0x270/0x600 Call Trace: [c000000054353a70] [c0000000003f3fb4] relay_open+0x264/0x600 (unreliable) [c000000054353b00] [c000000000451764] __blk_trace_setup+0x254/0x600 [c000000054353bb0] [c000000000451b78] blk_trace_setup+0x68/0xa0 [c000000054353c10] [c0000000010da77c] sg_ioctl+0x7bc/0x2e80 [c000000054353cd0] [c000000000758cbc] do_vfs_ioctl+0x13c/0x1300 [c000000054353d90] [c000000000759f14] ksys_ioctl+0x94/0x130 [c000000054353de0] [c000000000759ff8] sys_ioctl+0x48/0xb0 [c000000054353e20] [c00000000000bcd0] system_call+0x5c/0x68 Check if alloc_percpu returns NULL. This was found by syzkaller both on x86 and powerpc, and the reproducer it found on powerpc is capable of hitting the issue as an unprivileged user. https://lore.kernel.org/lkml/20191219121256.26480-1-dja%40axtens.net/ Fixes: 017c59c042d0 ("relay: Use per CPU constructs for the relay channel buffer pointers") Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- kernel/relay.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/relay.c b/kernel/relay.c index 9e0f523..078f733 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -581,6 +581,10 @@ struct rchan *relay_open(const char *base_filename, return NULL; chan->buf = alloc_percpu(struct rchan_buf *); + if (!chan->buf) { + kfree(chan); + return NULL; + } chan->version = RELAYFS_CHANNEL_VERSION; chan->n_subbufs = n_subbufs; chan->subbuf_size = subbuf_size; -- 1.8.3

1 0

[PATCH] drm/radeon: check the alloc_workqueue return value
by Yang Yingliang 10 Mar '20

10 Mar '20

hulk inclusion category: bugfix bugzilla: 13690 CVE: CVE-2019-16230 ------------------------------------------------- check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/gpu/drm/radeon/radeon_display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index d8e2d7b..09522b9 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -672,11 +672,16 @@ static void radeon_crtc_init(struct drm_device *dev, int index) if (radeon_crtc == NULL) return; + radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); + if (!radeon_crtc->flip_queue) { + kfree(radeon_crtc); + return; + } + drm_crtc_init(dev, &radeon_crtc->base, &radeon_crtc_funcs); drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256); radeon_crtc->crtc_id = index; - radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); rdev->mode_info.crtcs[index] = radeon_crtc; if (rdev->family >= CHIP_BONAIRE) { -- 1.8.3

1 0

[PATCH] apparmor: Fix use-after-free in aa_audit_rule_init
by Yang Yingliang 10 Mar '20

10 Mar '20

From: Navid Emamdoost <navid.emamdoost(a)gmail.com> hulk inclusion category: bugfix bugzilla: NA CVE: CVE-2019-18814 --------------------------- In the implementation of aa_audit_rule_init(), when aa_label_parse() fails the allocated memory for rule is released using aa_audit_rule_free(). But after this release, the return statement tries to access the label field of the rule which results in use-after-free. Before releasing the rule, copy errNo and return it after release. Fixes: 52e8c38001d8 ("apparmor: Fix memory leak of rule on error exit path") Signed-off-by: Navid Emamdoost <navid.emamdoost(a)gmail.com> Reviewed-by: Tyler Hicks <tyhicks(a)canonical.com> Signed-off-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Hanjun Guo <guohanjun(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- security/apparmor/audit.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/security/apparmor/audit.c b/security/apparmor/audit.c index eeaddfe..70b9730 100644 --- a/security/apparmor/audit.c +++ b/security/apparmor/audit.c @@ -201,8 +201,9 @@ int aa_audit_rule_init(u32 field, u32 op, char *rulestr, void **vrule) rule->label = aa_label_parse(&root_ns->unconfined->label, rulestr, GFP_KERNEL, true, false); if (IS_ERR(rule->label)) { + int err = PTR_ERR(rule->label); aa_audit_rule_free(rule); - return PTR_ERR(rule->label); + return err; } *vrule = rule; -- 1.8.3

1 0

[PATCH] can, slip: Protect tty->disc_data in write_wakeup and close with RCU
by Xiongfeng Wang 09 Mar '20

09 Mar '20

From: Richard Palethorpe <rpalethorpe(a)suse.com> [ Upstream commit 0ace17d56824165c7f4c68785d6b58971db954dd ] write_wakeup can happen in parallel with close/hangup where tty->disc_data is set to NULL and the netdevice is freed thus also freeing disc_data. write_wakeup accesses disc_data so we must prevent close from freeing the netdev while write_wakeup has a non-NULL view of tty->disc_data. We also need to make sure that accesses to disc_data are atomic. Which can all be done with RCU. This problem was found by Syzkaller on SLCAN, but the same issue is reproducible with the SLIP line discipline using an LTP test based on the Syzkaller reproducer. A fix which didn't use RCU was posted by Hillf Danton. Fixes: 661f7fda21b1 ("slip: Fix deadlock in write_wakeup") Fixes: a8e83b17536a ("slcan: Port write_wakeup deadlock fix from slip") Reported-by: syzbot+017e491ae13c0068598a(a)syzkaller.appspotmail.com Signed-off-by: Richard Palethorpe <rpalethorpe(a)suse.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Marc Kleine-Budde <mkl(a)pengutronix.de> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Tyler Hall <tylerwhall(a)gmail.com> Cc: linux-can(a)vger.kernel.org Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: syzkaller(a)googlegroups.com Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> --- drivers/net/can/slcan.c | 12 ++++++++++-- drivers/net/slip/slip.c | 12 ++++++++++-- 2 files changed, 20 insertions(+), 4 deletions(-) diff --git a/drivers/net/can/slcan.c b/drivers/net/can/slcan.c index cf0769a..b2e5bca 100644 --- a/drivers/net/can/slcan.c +++ b/drivers/net/can/slcan.c @@ -343,9 +343,16 @@ static void slcan_transmit(struct work_struct *work) */ static void slcan_write_wakeup(struct tty_struct *tty) { - struct slcan *sl = tty->disc_data; + struct slcan *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } /* Send a can_frame to a TTY queue. */ @@ -640,10 +647,11 @@ static void slcan_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* Flush network side */ diff --git a/drivers/net/slip/slip.c b/drivers/net/slip/slip.c index 77207f9..93f303e 100644 --- a/drivers/net/slip/slip.c +++ b/drivers/net/slip/slip.c @@ -452,9 +452,16 @@ static void slip_transmit(struct work_struct *work) */ static void slip_write_wakeup(struct tty_struct *tty) { - struct slip *sl = tty->disc_data; + struct slip *sl; + + rcu_read_lock(); + sl = rcu_dereference(tty->disc_data); + if (!sl) + goto out; schedule_work(&sl->tx_work); +out: + rcu_read_unlock(); } static void sl_tx_timeout(struct net_device *dev) @@ -882,10 +889,11 @@ static void slip_close(struct tty_struct *tty) return; spin_lock_bh(&sl->lock); - tty->disc_data = NULL; + rcu_assign_pointer(tty->disc_data, NULL); sl->tty = NULL; spin_unlock_bh(&sl->lock); + synchronize_rcu(); flush_work(&sl->tx_work); /* VSV = very important to remove timers */ -- 1.7.12.4

1 0

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 5

[PATCH 0/5] livepatch without ftrace for x86_64
by Yang Yingliang 03 Mar '20

03 Mar '20

Cheng Jian (5): livepatch/x86: support livepatch without ftrace livepatch/x86: check active func in consistency stack checking livepatch/arm64: check active func in consistency stack checking livepatch/x86: enable livepatch config for hulk livepatch/x86: enable livepatch config openeuler arch/arm64/kernel/livepatch.c | 84 ++++++---- arch/x86/Kconfig | 1 + arch/x86/configs/hulk_defconfig | 54 +++--- arch/x86/configs/openeuler_defconfig | 18 +- arch/x86/configs/syzkaller_defconfig | 53 +++--- arch/x86/include/asm/livepatch.h | 33 +++- arch/x86/kernel/livepatch.c | 307 +++++++++++++++++++++++++++++++++++ kernel/livepatch/core.c | 13 ++ 8 files changed, 492 insertions(+), 71 deletions(-) -- 1.8.3

1 0

[PATCH 0/3] fixes CVE-2020-2732
by Yang Yingliang 03 Mar '20

03 Mar '20

Oliver Upton (2): KVM: nVMX: Refactor IO bitmap checks into helper function KVM: nVMX: Check IO instruction VM-exit conditions Paolo Bonzini (1): KVM: nVMX: Don't emulate instructions in guest mode arch/x86/kvm/vmx.c | 99 +++++++++++++++++++++++++++++++++++++++++++----------- 1 file changed, 79 insertions(+), 20 deletions(-) -- 1.8.3

1 3

[PATCH] floppy: check FDC index for errors before assigning it
by Yang Yingliang 03 Mar '20

03 Mar '20

From: Linus Torvalds <torvalds(a)linux-foundation.org> commit 2e90ca68b0d2f5548804f22f0dd61145516171e3 upstream. Jordy Zomer reported a KASAN out-of-bounds read in the floppy driver in wait_til_ready(). Which on the face of it can't happen, since as Willy Tarreau points out, the function does no particular memory access. Except through the FDCS macro, which just indexes a static allocation through teh current fdc, which is always checked against N_FDC. Except the checking happens after we've already assigned the value. The floppy driver is a disgrace (a lot of it going back to my original horrd "design"), and has no real maintainer. Nobody has the hardware, and nobody really cares. But it still gets used in virtual environment because it's one of those things that everybody supports. The whole thing should be re-written, or at least parts of it should be seriously cleaned up. The 'current fdc' index, which is used by the FDCS macro, and which is often shadowed by a local 'fdc' variable, is a prime example of how not to write code. But because nobody has the hardware or the motivation, let's just fix up the immediate problem with a nasty band-aid: test the fdc index before actually assigning it to the static 'fdc' variable. Reported-by: Jordy Zomer <jordy(a)simplyhacker.com> Cc: Willy Tarreau <w(a)1wt.eu> Cc: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/block/floppy.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index e71589e..bf222c4 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -852,14 +852,17 @@ static void reset_fdc_info(int mode) /* selects the fdc and drive, and enables the fdc's input/dma. */ static void set_fdc(int drive) { + unsigned int new_fdc = fdc; + if (drive >= 0 && drive < N_DRIVE) { - fdc = FDC(drive); + new_fdc = FDC(drive); current_drive = drive; } - if (fdc != 1 && fdc != 0) { + if (new_fdc >= N_FDC) { pr_info("bad fdc value\n"); return; } + fdc = new_fdc; set_dor(fdc, ~0, 8); #if N_FDC > 1 set_dor(1 - fdc, ~8, 0); -- 1.8.3

1 0

[PATCH] ext4: add cond_resched() to __ext4_find_entry()
by Shijie Luo 29 Feb '20

29 Feb '20

mainline inclusion from mainline-v5.6-rc3 commit 9424ef56e13a1f14c57ea161eed3ecfdc7b2770e category: bugfix bugzilla: 31127 CVE: NA ------------------------------------------------- We tested a soft lockup problem in linux 4.19 which could also be found in linux 5.x. When dir inode takes up a large number of blocks, and if the directory is growing when we are searching, it's possible the restart branch could be called many times, and the do while loop could hold cpu a long time. Here is the call trace in linux 4.19. [ 473.756186] Call trace: [ 473.756196] dump_backtrace+0x0/0x198 [ 473.756199] show_stack+0x24/0x30 [ 473.756205] dump_stack+0xa4/0xcc [ 473.756210] watchdog_timer_fn+0x300/0x3e8 [ 473.756215] __hrtimer_run_queues+0x114/0x358 [ 473.756217] hrtimer_interrupt+0x104/0x2d8 [ 473.756222] arch_timer_handler_virt+0x38/0x58 [ 473.756226] handle_percpu_devid_irq+0x90/0x248 [ 473.756231] generic_handle_irq+0x34/0x50 [ 473.756234] __handle_domain_irq+0x68/0xc0 [ 473.756236] gic_handle_irq+0x6c/0x150 [ 473.756238] el1_irq+0xb8/0x140 [ 473.756286] ext4_es_lookup_extent+0xdc/0x258 [ext4] [ 473.756310] ext4_map_blocks+0x64/0x5c0 [ext4] [ 473.756333] ext4_getblk+0x6c/0x1d0 [ext4] [ 473.756356] ext4_bread_batch+0x7c/0x1f8 [ext4] [ 473.756379] ext4_find_entry+0x124/0x3f8 [ext4] [ 473.756402] ext4_lookup+0x8c/0x258 [ext4] [ 473.756407] __lookup_hash+0x8c/0xe8 [ 473.756411] filename_create+0xa0/0x170 [ 473.756413] do_mkdirat+0x6c/0x140 [ 473.756415] __arm64_sys_mkdirat+0x28/0x38 [ 473.756419] el0_svc_common+0x78/0x130 [ 473.756421] el0_svc_handler+0x38/0x78 [ 473.756423] el0_svc+0x8/0xc [ 485.755156] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [tmp:5149] Add cond_resched() to avoid soft lockup and to provide a better system responding. Link: https://lore.kernel.org/r/20200215080206.13293-1-luoshijie1@huawei.com Signed-off-by: Shijie Luo <luoshijie1(a)huawei.com> Signed-off-by: Theodore Ts'o <tytso(a)mit.edu> Reviewed-by: Jan Kara <jack(a)suse.cz> Cc: stable(a)kernel.org --- fs/ext4/namei.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index ceff4b4b1877..b05ea72f38fd 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -1511,6 +1511,7 @@ static struct buffer_head *__ext4_find_entry(struct inode *dir, /* * We deal with the read-ahead logic here. */ + cond_resched(); if (ra_ptr >= ra_max) { /* Refill the readahead buffer */ ra_ptr = 0; -- 2.19.1

2 1

[PATCH] x86 / config: add openeuler_defconfig
by Yang Yingliang 28 Feb '20

28 Feb '20

From: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> hulk inclusion category: config bugzilla: 31089 CVE: NA ----------------------------- Add openeuler_defconfig for openeuler itself. Signed-off-by: Xiongfeng Wang <wangxiongfeng2(a)huawei.com> Reviewed-By: Xie XiuQi <xiexiuqi(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/x86/configs/openeuler_defconfig | 7530 ++++++++++++++++++++++++++++++++++ 1 file changed, 7530 insertions(+) create mode 100644 arch/x86/configs/openeuler_defconfig diff --git a/arch/x86/configs/openeuler_defconfig b/arch/x86/configs/openeuler_defconfig new file mode 100644 index 00000000..1cf7b97 --- /dev/null +++ b/arch/x86/configs/openeuler_defconfig @@ -0,0 +1,7530 @@ +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=50400 +CONFIG_CLANG_VERSION=0 +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_IRQ_WORK=y +CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y + +# +# General setup +# +CONFIG_INIT_ENV_ARG_LIMIT=32 +# CONFIG_COMPILE_TEST is not set +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_XZ=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_XZ is not set +# CONFIG_KERNEL_LZO is not set +# CONFIG_KERNEL_LZ4 is not set +CONFIG_DEFAULT_HOSTNAME="(none)" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_CROSS_MEMORY_ATTACH=y +# CONFIG_USELIB is not set +CONFIG_AUDIT=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_WATCH=y +CONFIG_AUDIT_TREE=y +# CONFIG_KTASK is not set + +# +# IRQ subsystem +# +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y +CONFIG_GENERIC_IRQ_RESERVATION_MODE=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +CONFIG_CLOCKSOURCE_WATCHDOG=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y +CONFIG_GENERIC_CMOS_UPDATE=y + +# +# Timers subsystem +# +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ_COMMON=y +# CONFIG_HZ_PERIODIC is not set +# CONFIG_NO_HZ_IDLE is not set +CONFIG_NO_HZ_FULL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# CPU/Task time and stats accounting +# +CONFIG_VIRT_CPU_ACCOUNTING=y +CONFIG_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_SCHED_AVG_IRQ=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +CONFIG_TASK_XACCT=y +CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_CPU_ISOLATION=y + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_RCU_EXPERT is not set +CONFIG_SRCU=y +CONFIG_TREE_SRCU=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_CONTEXT_TRACKING=y +# CONFIG_CONTEXT_TRACKING_FORCE is not set +CONFIG_RCU_NOCB_CPU=y +CONFIG_BUILD_BIN2C=y +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=20 +CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13 +CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_NUMA_BALANCING=y +CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y +CONFIG_CGROUPS=y +CONFIG_PAGE_COUNTER=y +CONFIG_MEMCG=y +CONFIG_MEMCG_SWAP=y +CONFIG_MEMCG_SWAP_ENABLED=y +CONFIG_MEMCG_KMEM=y +CONFIG_BLK_CGROUP=y +# CONFIG_DEBUG_BLK_CGROUP is not set +CONFIG_CGROUP_WRITEBACK=y +CONFIG_CGROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_CGROUP_PIDS=y +CONFIG_CGROUP_RDMA=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_HUGETLB=y +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y +# CONFIG_CGROUP_FILES is not set +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_NET_NS=y +CONFIG_CHECKPOINT_RESTORE=y +CONFIG_SCHED_AUTOGROUP=y +# CONFIG_SYSFS_DEPRECATED is not set +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_RD_LZ4=y +CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_HAVE_UID16=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_HAVE_PCSPKR_PLATFORM=y +CONFIG_BPF=y +# CONFIG_EXPERT is not set +CONFIG_UID16=y +CONFIG_MULTIUSER=y +CONFIG_SGETMASK_SYSCALL=y +CONFIG_SYSFS_SYSCALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y +CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_PCSPKR_PLATFORM=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_ADVISE_SYSCALLS=y +CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT_ALWAYS_ON=y +CONFIG_USERFAULTFD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_RSEQ=y +# CONFIG_EMBEDDED is not set +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +CONFIG_PERF_EVENTS=y +# CONFIG_DEBUG_PERF_USE_VMALLOC is not set +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_COMPAT_BRK is not set +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLAB_MERGE_DEFAULT=y +CONFIG_SLAB_FREELIST_RANDOM=y +# CONFIG_SLAB_FREELIST_HARDENED is not set +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SYSTEM_DATA_VERIFICATION=y +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_64BIT=y +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_MMU=y +CONFIG_ARCH_MMAP_RND_BITS_MIN=28 +CONFIG_ARCH_MMAP_RND_BITS_MAX=32 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_FILTER_PGPROT=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ZONE_DMA32=y +CONFIG_AUDIT_ARCH=y +CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_HAVE_INTEL_TXT=y +CONFIG_X86_64_SMP=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_DYNAMIC_PHYSICAL_MASK=y +CONFIG_PGTABLE_LEVELS=5 +CONFIG_CC_HAS_SANE_STACKPROTECTOR=y + +# +# Processor type and features +# +CONFIG_ZONE_DMA=y +CONFIG_SMP=y +CONFIG_X86_FEATURE_NAMES=y +CONFIG_X86_X2APIC=y +CONFIG_X86_MPPARSE=y +# CONFIG_GOLDFISH is not set +CONFIG_RETPOLINE=y +# CONFIG_INTEL_RDT is not set +CONFIG_X86_EXTENDED_PLATFORM=y +# CONFIG_X86_NUMACHIP is not set +# CONFIG_X86_VSMP is not set +CONFIG_X86_UV=y +# CONFIG_X86_GOLDFISH is not set +# CONFIG_X86_INTEL_MID is not set +CONFIG_X86_INTEL_LPSS=y +CONFIG_X86_AMD_PLATFORM_DEVICE=y +CONFIG_IOSF_MBI=y +# CONFIG_IOSF_MBI_DEBUG is not set +CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_HYPERVISOR_GUEST=y +CONFIG_PARAVIRT=y +# CONFIG_PARAVIRT_DEBUG is not set +CONFIG_PARAVIRT_SPINLOCKS=y +# CONFIG_QUEUED_LOCK_STAT is not set +CONFIG_XEN=y +# CONFIG_XEN_PV is not set +CONFIG_XEN_PVHVM=y +CONFIG_XEN_PVHVM_SMP=y +CONFIG_XEN_SAVE_RESTORE=y +# CONFIG_XEN_DEBUG_FS is not set +# CONFIG_XEN_PVH is not set +CONFIG_KVM_GUEST=y +# CONFIG_KVM_DEBUG_FS is not set +CONFIG_PARAVIRT_TIME_ACCOUNTING=y +CONFIG_PARAVIRT_CLOCK=y +# CONFIG_JAILHOUSE_GUEST is not set +CONFIG_NO_BOOTMEM=y +# CONFIG_MK8 is not set +# CONFIG_MPSC is not set +# CONFIG_MCORE2 is not set +# CONFIG_MATOM is not set +CONFIG_GENERIC_CPU=y +CONFIG_X86_INTERNODE_CACHE_SHIFT=6 +CONFIG_X86_L1_CACHE_SHIFT=6 +CONFIG_X86_TSC=y +CONFIG_X86_CMPXCHG64=y +CONFIG_X86_CMOV=y +CONFIG_X86_MINIMUM_CPU_FAMILY=64 +CONFIG_X86_DEBUGCTLMSR=y +CONFIG_CPU_SUP_INTEL=y +CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_CENTAUR=y +CONFIG_HPET_TIMER=y +CONFIG_HPET_EMULATE_RTC=y +CONFIG_DMI=y +# CONFIG_GART_IOMMU is not set +# CONFIG_CALGARY_IOMMU is not set +CONFIG_MAXSMP=y +CONFIG_NR_CPUS_RANGE_BEGIN=8192 +CONFIG_NR_CPUS_RANGE_END=8192 +CONFIG_NR_CPUS_DEFAULT=8192 +CONFIG_NR_CPUS=8192 +CONFIG_SCHED_SMT=y +CONFIG_SCHED_MC=y +CONFIG_SCHED_MC_PRIO=y +CONFIG_X86_LOCAL_APIC=y +CONFIG_X86_IO_APIC=y +CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y +CONFIG_X86_MCE=y +CONFIG_X86_MCELOG_LEGACY=y +CONFIG_X86_MCE_INTEL=y +CONFIG_X86_MCE_AMD=y +CONFIG_X86_MCE_THRESHOLD=y +CONFIG_X86_MCE_INJECT=m +CONFIG_X86_THERMAL_VECTOR=y + +# +# Performance monitoring +# +CONFIG_PERF_EVENTS_INTEL_UNCORE=m +CONFIG_PERF_EVENTS_INTEL_RAPL=m +CONFIG_PERF_EVENTS_INTEL_CSTATE=m +CONFIG_PERF_EVENTS_AMD_POWER=m +CONFIG_X86_16BIT=y +CONFIG_X86_ESPFIX64=y +CONFIG_X86_VSYSCALL_EMULATION=y +CONFIG_I8K=m +CONFIG_MICROCODE=y +CONFIG_MICROCODE_INTEL=y +CONFIG_MICROCODE_AMD=y +CONFIG_MICROCODE_OLD_INTERFACE=y +CONFIG_X86_MSR=y +CONFIG_X86_CPUID=y +CONFIG_X86_5LEVEL=y +CONFIG_X86_DIRECT_GBPAGES=y +CONFIG_ARCH_HAS_MEM_ENCRYPT=y +CONFIG_AMD_MEM_ENCRYPT=y +# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set +CONFIG_NUMA=y +# CONFIG_NUMA_AWARE_SPINLOCKS is not set +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +CONFIG_NODES_SPAN_OTHER_NODES=y +CONFIG_NUMA_EMU=y +CONFIG_NODES_SHIFT=10 +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +# CONFIG_ARCH_MEMORY_PROBE is not set +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_X86_PMEM_LEGACY_DEVICE=y +CONFIG_X86_PMEM_LEGACY=m +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set +CONFIG_X86_RESERVE_LOW=64 +CONFIG_MTRR=y +CONFIG_MTRR_SANITIZER=y +CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 +CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 +CONFIG_X86_PAT=y +CONFIG_ARCH_USES_PG_UNCACHED=y +CONFIG_ARCH_RANDOM=y +CONFIG_X86_SMAP=y +CONFIG_X86_INTEL_UMIP=y +# CONFIG_X86_INTEL_MPX is not set +CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y +CONFIG_X86_INTEL_TSX_MODE_OFF=y +# CONFIG_X86_INTEL_TSX_MODE_ON is not set +# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set +CONFIG_EFI=y +CONFIG_EFI_STUB=y +CONFIG_EFI_MIXED=y +CONFIG_SECCOMP=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +CONFIG_SCHED_HRTICK=y +CONFIG_KEXEC=y +CONFIG_KEXEC_FILE=y +CONFIG_ARCH_HAS_KEXEC_PURGATORY=y +CONFIG_KEXEC_VERIFY_SIG=y +CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y +CONFIG_CRASH_DUMP=y +CONFIG_KEXEC_JUMP=y +CONFIG_PHYSICAL_START=0x1000000 +CONFIG_RELOCATABLE=y +CONFIG_RANDOMIZE_BASE=y +CONFIG_X86_NEED_RELOCS=y +CONFIG_PHYSICAL_ALIGN=0x200000 +CONFIG_DYNAMIC_MEMORY_LAYOUT=y +CONFIG_RANDOMIZE_MEMORY=y +CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa +CONFIG_HOTPLUG_CPU=y +CONFIG_BOOTPARAM_HOTPLUG_CPU0=y +# CONFIG_DEBUG_HOTPLUG_CPU0 is not set +# CONFIG_COMPAT_VDSO is not set +CONFIG_LEGACY_VSYSCALL_EMULATE=y +# CONFIG_LEGACY_VSYSCALL_NONE is not set +# CONFIG_CMDLINE_BOOL is not set +CONFIG_MODIFY_LDT_SYSCALL=y +CONFIG_HAVE_LIVEPATCH_FTRACE=y + +# +# Enable Livepatch +# +# CONFIG_LIVEPATCH is not set +CONFIG_ARCH_HAS_ADD_PAGES=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y +CONFIG_ARCH_ENABLE_THP_MIGRATION=y + +# +# Power management and ACPI options +# +CONFIG_ARCH_HIBERNATION_HEADER=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_HIBERNATE_CALLBACKS=y +CONFIG_HIBERNATION=y +CONFIG_PM_STD_PARTITION="" +CONFIG_PM_SLEEP=y +CONFIG_PM_SLEEP_SMP=y +# CONFIG_PM_AUTOSLEEP is not set +# CONFIG_PM_WAKELOCKS is not set +CONFIG_PM=y +CONFIG_PM_DEBUG=y +# CONFIG_PM_ADVANCED_DEBUG is not set +# CONFIG_PM_TEST_SUSPEND is not set +CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_PM_TRACE_RTC is not set +CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y +# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +CONFIG_ARCH_SUPPORTS_ACPI=y +CONFIG_ACPI=y +CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y +CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y +CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y +# CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +CONFIG_ACPI_LPIT=y +CONFIG_ACPI_SLEEP=y +# CONFIG_ACPI_PROCFS_POWER is not set +CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y +CONFIG_ACPI_EC_DEBUGFS=m +CONFIG_ACPI_AC=y +CONFIG_ACPI_BATTERY=y +CONFIG_ACPI_BUTTON=y +CONFIG_ACPI_VIDEO=m +CONFIG_ACPI_FAN=y +CONFIG_ACPI_TAD=m +CONFIG_ACPI_DOCK=y +CONFIG_ACPI_CPU_FREQ_PSS=y +CONFIG_ACPI_PROCESSOR_CSTATE=y +CONFIG_ACPI_PROCESSOR_IDLE=y +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y +CONFIG_ACPI_IPMI=m +CONFIG_ACPI_HOTPLUG_CPU=y +CONFIG_ACPI_PROCESSOR_AGGREGATOR=m +CONFIG_ACPI_THERMAL=y +CONFIG_ACPI_NUMA=y +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y +# CONFIG_ACPI_DEBUG is not set +CONFIG_ACPI_PCI_SLOT=y +CONFIG_ACPI_CONTAINER=y +CONFIG_ACPI_HOTPLUG_MEMORY=y +CONFIG_ACPI_HOTPLUG_IOAPIC=y +CONFIG_ACPI_SBS=m +CONFIG_ACPI_HED=y +# CONFIG_ACPI_CUSTOM_METHOD is not set +CONFIG_ACPI_BGRT=y +CONFIG_ACPI_NFIT=m +CONFIG_HAVE_ACPI_APEI=y +CONFIG_HAVE_ACPI_APEI_NMI=y +CONFIG_ACPI_APEI=y +CONFIG_ACPI_APEI_GHES=y +CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y +CONFIG_ACPI_APEI_EINJ=m +# CONFIG_ACPI_APEI_ERST_DEBUG is not set +CONFIG_DPTF_POWER=m +CONFIG_ACPI_WATCHDOG=y +CONFIG_ACPI_EXTLOG=m +CONFIG_PMIC_OPREGION=y +# CONFIG_ACPI_CONFIGFS is not set +CONFIG_X86_PM_TIMER=y +CONFIG_SFI=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set + +# +# CPU frequency scaling drivers +# +CONFIG_X86_INTEL_PSTATE=y +# CONFIG_X86_PCC_CPUFREQ is not set +CONFIG_X86_ACPI_CPUFREQ=m +CONFIG_X86_ACPI_CPUFREQ_CPB=y +CONFIG_X86_POWERNOW_K8=m +CONFIG_X86_AMD_FREQ_SENSITIVITY=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +CONFIG_X86_P4_CLOCKMOD=m + +# +# shared options +# +CONFIG_X86_SPEEDSTEP_LIB=m + +# +# CPU Idle +# +CONFIG_CPU_IDLE=y +# CONFIG_CPU_IDLE_GOV_LADDER is not set +CONFIG_CPU_IDLE_GOV_MENU=y +CONFIG_INTEL_IDLE=y + +# +# Bus options (PCI etc.) +# +CONFIG_PCI=y +CONFIG_PCI_DIRECT=y +CONFIG_PCI_MMCONFIG=y +CONFIG_PCI_XEN=y +CONFIG_PCI_DOMAINS=y +CONFIG_MMCONF_FAM10H=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIEAER_INJECT=m +CONFIG_PCIE_ECRC=y +CONFIG_PCIEASPM=y +# CONFIG_PCIEASPM_DEBUG is not set +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +CONFIG_PCIE_DPC=y +# CONFIG_PCIE_PTM is not set +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=y +CONFIG_PCI_PF_STUB=m +# CONFIG_XEN_PCIDEV_FRONTEND is not set +CONFIG_PCI_ATS=y +CONFIG_PCI_LOCKLESS_CONFIG=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_HYPERV=m +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +CONFIG_HOTPLUG_PCI_SHPC=y + +# +# PCI controller drivers +# + +# +# Cadence PCIe controllers support +# +CONFIG_VMD=y + +# +# DesignWare PCI Core Support +# +# CONFIG_PCIE_DW_PLAT_HOST is not set +# CONFIG_HISILICON_PCIE_CAE is not set + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set + +# +# PCI switch controller drivers +# +# CONFIG_PCI_SW_SWITCHTEC is not set +CONFIG_ISA_DMA_API=y +CONFIG_AMD_NB=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA is not set +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +# CONFIG_RAPIDIO is not set +# CONFIG_X86_SYSFB is not set + +# +# Binary Emulations +# +CONFIG_IA32_EMULATION=y +# CONFIG_X86_X32 is not set +CONFIG_COMPAT_32=y +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +CONFIG_X86_DEV_DMA_OPS=y +CONFIG_HAVE_GENERIC_GUP=y + +# +# Firmware Drivers +# +CONFIG_EDD=m +# CONFIG_EDD_OFF is not set +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DELL_RBU=m +CONFIG_DCDBAS=m +CONFIG_DMIID=y +CONFIG_DMI_SYSFS=y +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m +CONFIG_FW_CFG_SYSFS=y +# CONFIG_FW_CFG_SYSFS_CMDLINE is not set +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_ESRT=y +CONFIG_EFI_VARS_PSTORE=y +CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y +CONFIG_EFI_RUNTIME_MAP=y +# CONFIG_EFI_FAKE_MEMMAP is not set +CONFIG_EFI_RUNTIME_WRAPPERS=y +# CONFIG_EFI_BOOTLOADER_CONTROL is not set +# CONFIG_EFI_CAPSULE_LOADER is not set +# CONFIG_EFI_TEST is not set +CONFIG_APPLE_PROPERTIES=y +# CONFIG_RESET_ATTACK_MITIGATION is not set +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_X86=y +CONFIG_EFI_DEV_PATH_PARSER=y + +# +# Tegra firmware driver +# +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_KVM_ASYNC_PF=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +CONFIG_KVM_INTEL=m +CONFIG_KVM_AMD=m +CONFIG_KVM_AMD_SEV=y +CONFIG_KVM_MMU_AUDIT=y +CONFIG_VHOST_NET=m +# CONFIG_VHOST_SCSI is not set +CONFIG_VHOST_VSOCK=m +CONFIG_VHOST=m +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set + +# +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +CONFIG_HOTPLUG_SMT=y +CONFIG_OPROFILE=m +CONFIG_OPROFILE_EVENT_MULTIPLEX=y +CONFIG_HAVE_OPROFILE=y +CONFIG_OPROFILE_NMI_TIMER=y +CONFIG_KPROBES=y +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +CONFIG_OPTPROBES=y +CONFIG_KPROBES_ON_FTRACE=y +CONFIG_UPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_KRETPROBES=y +CONFIG_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HAVE_RCU_TABLE_INVALIDATE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP_FILTER=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_CC_HAS_STACKPROTECTOR_NONE=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_HAVE_EXIT_THREAD=y +CONFIG_ARCH_MMAP_RND_BITS=28 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 +CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y +CONFIG_HAVE_COPY_THREAD_TLS=y +CONFIG_HAVE_STACK_VALIDATION=y +CONFIG_HAVE_RELIABLE_STACKTRACE=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_REFCOUNT=y +# CONFIG_REFCOUNT_FULL is not set +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_PLUGIN_HOSTCC="g++" +CONFIG_HAVE_GCC_PLUGINS=y +# CONFIG_GCC_PLUGINS is not set +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +CONFIG_MODULE_SIG=y +# CONFIG_MODULE_SIG_FORCE is not set +CONFIG_MODULE_SIG_ALL=y +# CONFIG_MODULE_SIG_SHA1 is not set +# CONFIG_MODULE_SIG_SHA224 is not set +CONFIG_MODULE_SIG_SHA256=y +# CONFIG_MODULE_SIG_SHA384 is not set +# CONFIG_MODULE_SIG_SHA512 is not set +CONFIG_MODULE_SIG_HASH="sha256" +# CONFIG_MODULE_COMPRESS is not set +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +# CONFIG_BLK_DEV_ZONED is not set +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +# CONFIG_BLK_CGROUP_IOLATENCY is not set +# CONFIG_BLK_WBT_SQ is not set +CONFIG_BLK_WBT_MQ=y +CONFIG_BLK_DEBUG_FS=y +# CONFIG_BLK_SED_OPAL is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_AIX_PARTITION is not set +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_MQ_RDMA=y + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_CFQ_GROUP_IOSCHED is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=y +CONFIG_IOSCHED_BFQ=y +CONFIG_BFQ_GROUP_IOSCHED=y +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +CONFIG_BINFMT_SCRIPT=y +CONFIG_BINFMT_MISC=m +CONFIG_COREDUMP=y + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_HAVE_BOOTMEM_INFO_NODE=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +# CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE is not set +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_MIGRATION=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m +CONFIG_TRANSPARENT_HUGEPAGE=y +CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y +# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set +CONFIG_ARCH_WANTS_THP_SWAP=y +CONFIG_THP_SWAP=y +CONFIG_TRANSPARENT_HUGE_PAGECACHE=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +# CONFIG_SHRINK_PAGECACHE is not set +# CONFIG_CMA is not set +CONFIG_MEM_SOFT_DIRTY=y +CONFIG_ZSWAP=y +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +# CONFIG_Z3FOLD is not set +CONFIG_ZSMALLOC=y +# CONFIG_PGTABLE_MAPPING is not set +CONFIG_ZSMALLOC_STAT=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_DEFERRED_STRUCT_PAGE_INIT=y +CONFIG_IDLE_PAGE_TRACKING=y +CONFIG_ARCH_HAS_ZONE_DEVICE=y +CONFIG_ZONE_DEVICE=y +CONFIG_ARCH_HAS_HMM=y +CONFIG_MIGRATE_VMA_HELPER=y +CONFIG_DEV_PAGEMAP_OPS=y +CONFIG_HMM=y +CONFIG_HMM_MIRROR=y +CONFIG_DEVICE_PRIVATE=y +CONFIG_DEVICE_PUBLIC=y +CONFIG_FRAME_VECTOR=y +CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y +CONFIG_ARCH_HAS_PKEYS=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_BENCHMARK is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_NET=y +CONFIG_NET_INGRESS=y +CONFIG_NET_EGRESS=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_DIAG=m +CONFIG_UNIX=y +CONFIG_UNIX_DIAG=m +CONFIG_TLS=m +CONFIG_TLS_DEVICE=y +CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y +CONFIG_XFRM_ALGO=y +CONFIG_XFRM_USER=y +CONFIG_XFRM_INTERFACE=m +CONFIG_XFRM_SUB_POLICY=y +CONFIG_XFRM_MIGRATE=y +CONFIG_XFRM_STATISTICS=y +CONFIG_XFRM_IPCOMP=m +CONFIG_NET_KEY=m +CONFIG_NET_KEY_MIGRATE=y +# CONFIG_SMC is not set +CONFIG_XDP_SOCKETS=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_FIB_TRIE_STATS=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_ROUTE_CLASSID=y +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE_DEMUX=m +CONFIG_NET_IP_TUNNEL=m +CONFIG_NET_IPGRE=m +CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE_COMMON=y +CONFIG_IP_MROUTE=y +CONFIG_IP_MROUTE_MULTIPLE_TABLES=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_NET_IPVTI=m +CONFIG_NET_UDP_TUNNEL=m +# CONFIG_NET_FOU is not set +# CONFIG_NET_FOU_IP_TUNNELS is not set +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_TUNNEL=m +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_DIAG=m +CONFIG_INET_TCP_DIAG=m +CONFIG_INET_UDP_DIAG=m +CONFIG_INET_RAW_DIAG=m +# CONFIG_INET_DIAG_DESTROY is not set +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m +CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +# CONFIG_TCP_CONG_CDG is not set +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="cubic" +CONFIG_TCP_MD5SIG=y +CONFIG_IPV6=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_IPV6_OPTIMISTIC_DAD=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +# CONFIG_IPV6_ILA is not set +CONFIG_INET6_XFRM_TUNNEL=m +CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_VTI=m +CONFIG_IPV6_SIT=m +CONFIG_IPV6_SIT_6RD=y +CONFIG_IPV6_NDISC_NODETYPE=y +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_GRE=m +CONFIG_IPV6_MULTIPLE_TABLES=y +# CONFIG_IPV6_SUBTREES is not set +CONFIG_IPV6_MROUTE=y +CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y +CONFIG_IPV6_PIMSM_V2=y +# CONFIG_IPV6_SEG6_LWTUNNEL is not set +# CONFIG_IPV6_SEG6_HMAC is not set +CONFIG_NETLABEL=y +CONFIG_NETWORK_SECMARK=y +CONFIG_NET_PTP_CLASSIFY=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_NETFILTER=y +CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=m + +# +# Core Netfilter Configuration +# +CONFIG_NETFILTER_INGRESS=y +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_FAMILY_BRIDGE=y +CONFIG_NETFILTER_FAMILY_ARP=y +# CONFIG_NETFILTER_NETLINK_ACCT is not set +CONFIG_NETFILTER_NETLINK_QUEUE=m +CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_OSF=m +CONFIG_NF_CONNTRACK=m +CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_NETDEV=m +CONFIG_NETFILTER_CONNCOUNT=m +CONFIG_NF_CONNTRACK_MARK=y +CONFIG_NF_CONNTRACK_SECMARK=y +CONFIG_NF_CONNTRACK_ZONES=y +CONFIG_NF_CONNTRACK_PROCFS=y +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y +CONFIG_NF_CONNTRACK_LABELS=y +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=m +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y +CONFIG_NF_CONNTRACK_AMANDA=m +CONFIG_NF_CONNTRACK_FTP=m +CONFIG_NF_CONNTRACK_H323=m +CONFIG_NF_CONNTRACK_IRC=m +CONFIG_NF_CONNTRACK_BROADCAST=m +CONFIG_NF_CONNTRACK_NETBIOS_NS=m +CONFIG_NF_CONNTRACK_SNMP=m +CONFIG_NF_CONNTRACK_PPTP=m +CONFIG_NF_CONNTRACK_SANE=m +CONFIG_NF_CONNTRACK_SIP=m +CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m +CONFIG_NF_CT_NETLINK_TIMEOUT=m +CONFIG_NF_CT_NETLINK_HELPER=m +CONFIG_NETFILTER_NETLINK_GLUE_CT=y +CONFIG_NF_NAT=m +CONFIG_NF_NAT_NEEDED=y +CONFIG_NF_NAT_PROTO_DCCP=y +CONFIG_NF_NAT_PROTO_UDPLITE=y +CONFIG_NF_NAT_PROTO_SCTP=y +CONFIG_NF_NAT_AMANDA=m +CONFIG_NF_NAT_FTP=m +CONFIG_NF_NAT_IRC=m +CONFIG_NF_NAT_SIP=m +CONFIG_NF_NAT_TFTP=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NETFILTER_SYNPROXY=m +CONFIG_NF_TABLES=m +CONFIG_NF_TABLES_SET=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m +CONFIG_NFT_CT=m +CONFIG_NFT_COUNTER=m +CONFIG_NFT_CONNLIMIT=m +CONFIG_NFT_LOG=m +CONFIG_NFT_LIMIT=m +CONFIG_NFT_MASQ=m +CONFIG_NFT_REDIR=m +CONFIG_NFT_NAT=m +# CONFIG_NFT_TUNNEL is not set +CONFIG_NFT_OBJREF=m +CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m +CONFIG_NFT_REJECT=m +CONFIG_NFT_REJECT_INET=m +CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +# CONFIG_NFT_SOCKET is not set +# CONFIG_NFT_OSF is not set +# CONFIG_NFT_TPROXY is not set +CONFIG_NF_DUP_NETDEV=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +# CONFIG_NF_FLOW_TABLE is not set +CONFIG_NETFILTER_XTABLES=y + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m +CONFIG_NETFILTER_XT_SET=m + +# +# Xtables targets +# +CONFIG_NETFILTER_XT_TARGET_AUDIT=m +CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m +CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m +CONFIG_NETFILTER_XT_TARGET_CONNMARK=m +CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m +CONFIG_NETFILTER_XT_TARGET_CT=m +CONFIG_NETFILTER_XT_TARGET_DSCP=m +CONFIG_NETFILTER_XT_TARGET_HL=m +CONFIG_NETFILTER_XT_TARGET_HMARK=m +CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m +# CONFIG_NETFILTER_XT_TARGET_LED is not set +CONFIG_NETFILTER_XT_TARGET_LOG=m +CONFIG_NETFILTER_XT_TARGET_MARK=m +CONFIG_NETFILTER_XT_NAT=m +CONFIG_NETFILTER_XT_TARGET_NETMAP=m +CONFIG_NETFILTER_XT_TARGET_NFLOG=m +CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m +CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +CONFIG_NETFILTER_XT_TARGET_RATEEST=m +CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_TEE=m +CONFIG_NETFILTER_XT_TARGET_TPROXY=m +CONFIG_NETFILTER_XT_TARGET_TRACE=m +CONFIG_NETFILTER_XT_TARGET_SECMARK=m +CONFIG_NETFILTER_XT_TARGET_TCPMSS=m +CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m + +# +# Xtables matches +# +CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m +CONFIG_NETFILTER_XT_MATCH_BPF=m +CONFIG_NETFILTER_XT_MATCH_CGROUP=m +CONFIG_NETFILTER_XT_MATCH_CLUSTER=m +CONFIG_NETFILTER_XT_MATCH_COMMENT=m +CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m +CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m +CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m +CONFIG_NETFILTER_XT_MATCH_CONNMARK=m +CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m +CONFIG_NETFILTER_XT_MATCH_CPU=m +CONFIG_NETFILTER_XT_MATCH_DCCP=m +CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m +CONFIG_NETFILTER_XT_MATCH_DSCP=m +CONFIG_NETFILTER_XT_MATCH_ECN=m +CONFIG_NETFILTER_XT_MATCH_ESP=m +CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m +CONFIG_NETFILTER_XT_MATCH_HELPER=m +CONFIG_NETFILTER_XT_MATCH_HL=m +# CONFIG_NETFILTER_XT_MATCH_IPCOMP is not set +CONFIG_NETFILTER_XT_MATCH_IPRANGE=m +CONFIG_NETFILTER_XT_MATCH_IPVS=m +# CONFIG_NETFILTER_XT_MATCH_L2TP is not set +CONFIG_NETFILTER_XT_MATCH_LENGTH=m +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +CONFIG_NETFILTER_XT_MATCH_MAC=m +CONFIG_NETFILTER_XT_MATCH_MARK=m +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set +CONFIG_NETFILTER_XT_MATCH_OSF=m +CONFIG_NETFILTER_XT_MATCH_OWNER=m +CONFIG_NETFILTER_XT_MATCH_POLICY=m +CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m +CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m +CONFIG_NETFILTER_XT_MATCH_QUOTA=m +CONFIG_NETFILTER_XT_MATCH_RATEEST=m +CONFIG_NETFILTER_XT_MATCH_REALM=m +CONFIG_NETFILTER_XT_MATCH_RECENT=m +CONFIG_NETFILTER_XT_MATCH_SCTP=m +CONFIG_NETFILTER_XT_MATCH_SOCKET=m +CONFIG_NETFILTER_XT_MATCH_STATE=m +CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +CONFIG_NETFILTER_XT_MATCH_STRING=m +CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +CONFIG_IP_SET=m +CONFIG_IP_SET_MAX=256 +CONFIG_IP_SET_BITMAP_IP=m +CONFIG_IP_SET_BITMAP_IPMAC=m +CONFIG_IP_SET_BITMAP_PORT=m +CONFIG_IP_SET_HASH_IP=m +CONFIG_IP_SET_HASH_IPMARK=m +CONFIG_IP_SET_HASH_IPPORT=m +CONFIG_IP_SET_HASH_IPPORTIP=m +CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_IPMAC=m +CONFIG_IP_SET_HASH_MAC=m +CONFIG_IP_SET_HASH_NETPORTNET=m +CONFIG_IP_SET_HASH_NET=m +CONFIG_IP_SET_HASH_NETNET=m +CONFIG_IP_SET_HASH_NETPORT=m +CONFIG_IP_SET_HASH_NETIFACE=m +CONFIG_IP_SET_LIST_SET=m +CONFIG_IP_VS=m +CONFIG_IP_VS_IPV6=y +# CONFIG_IP_VS_DEBUG is not set +CONFIG_IP_VS_TAB_BITS=12 + +# +# IPVS transport protocol load balancing support +# +CONFIG_IP_VS_PROTO_TCP=y +CONFIG_IP_VS_PROTO_UDP=y +CONFIG_IP_VS_PROTO_AH_ESP=y +CONFIG_IP_VS_PROTO_ESP=y +CONFIG_IP_VS_PROTO_AH=y +CONFIG_IP_VS_PROTO_SCTP=y + +# +# IPVS scheduler +# +CONFIG_IP_VS_RR=m +CONFIG_IP_VS_WRR=m +CONFIG_IP_VS_LC=m +CONFIG_IP_VS_WLC=m +CONFIG_IP_VS_FO=m +CONFIG_IP_VS_OVF=m +CONFIG_IP_VS_LBLC=m +CONFIG_IP_VS_LBLCR=m +CONFIG_IP_VS_DH=m +CONFIG_IP_VS_SH=m +# CONFIG_IP_VS_MH is not set +CONFIG_IP_VS_SED=m +CONFIG_IP_VS_NQ=m + +# +# IPVS SH scheduler +# +CONFIG_IP_VS_SH_TAB_BITS=8 + +# +# IPVS MH scheduler +# +CONFIG_IP_VS_MH_TAB_INDEX=12 + +# +# IPVS application helper +# +CONFIG_IP_VS_FTP=m +CONFIG_IP_VS_NFCT=y +CONFIG_IP_VS_PE_SIP=m + +# +# IP: Netfilter Configuration +# +CONFIG_NF_DEFRAG_IPV4=m +CONFIG_NF_SOCKET_IPV4=m +CONFIG_NF_TPROXY_IPV4=m +CONFIG_NF_TABLES_IPV4=y +CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NFT_REJECT_IPV4=m +CONFIG_NFT_DUP_IPV4=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_DUP_IPV4=m +CONFIG_NF_LOG_ARP=m +CONFIG_NF_LOG_IPV4=m +CONFIG_NF_REJECT_IPV4=m +CONFIG_NF_NAT_IPV4=m +CONFIG_NF_NAT_MASQUERADE_IPV4=y +CONFIG_NFT_CHAIN_NAT_IPV4=m +CONFIG_NFT_MASQ_IPV4=m +CONFIG_NFT_REDIR_IPV4=m +CONFIG_NF_NAT_SNMP_BASIC=m +CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PPTP=m +CONFIG_NF_NAT_H323=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_RPFILTER=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_FILTER=m +CONFIG_IP_NF_TARGET_REJECT=m +CONFIG_IP_NF_TARGET_SYNPROXY=m +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_TARGET_MASQUERADE=m +CONFIG_IP_NF_TARGET_NETMAP=m +CONFIG_IP_NF_TARGET_REDIRECT=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_CLUSTERIP is not set +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_TTL=m +CONFIG_IP_NF_RAW=m +CONFIG_IP_NF_SECURITY=m +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration +# +CONFIG_NF_SOCKET_IPV6=m +CONFIG_NF_TPROXY_IPV6=m +CONFIG_NF_TABLES_IPV6=y +CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NFT_MASQ_IPV6=m +CONFIG_NFT_REDIR_IPV6=m +CONFIG_NFT_REJECT_IPV6=m +CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_DUP_IPV6=m +CONFIG_NF_REJECT_IPV6=m +CONFIG_NF_LOG_IPV6=m +CONFIG_NF_NAT_IPV6=m +CONFIG_NF_NAT_MASQUERADE_IPV6=y +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_MH=m +CONFIG_IP6_NF_MATCH_RPFILTER=m +CONFIG_IP6_NF_MATCH_RT=m +# CONFIG_IP6_NF_MATCH_SRH is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_REJECT=m +CONFIG_IP6_NF_TARGET_SYNPROXY=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_RAW=m +CONFIG_IP6_NF_SECURITY=m +CONFIG_IP6_NF_NAT=m +CONFIG_IP6_NF_TARGET_MASQUERADE=m +CONFIG_IP6_NF_TARGET_NPT=m +CONFIG_NF_DEFRAG_IPV6=m +CONFIG_NF_TABLES_BRIDGE=y +CONFIG_NFT_BRIDGE_REJECT=m +CONFIG_NF_LOG_BRIDGE=m +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_IP6=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_BPFILTER is not set +# CONFIG_IP_DCCP is not set +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5 is not set +CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1=y +# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set +CONFIG_SCTP_COOKIE_HMAC_MD5=y +CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_INET_SCTP_DIAG=m +# CONFIG_RDS is not set +CONFIG_TIPC=m +CONFIG_TIPC_MEDIA_IB=y +CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_DIAG=m +CONFIG_ATM=m +CONFIG_ATM_CLIP=m +# CONFIG_ATM_CLIP_NO_ICMP is not set +CONFIG_ATM_LANE=m +# CONFIG_ATM_MPOA is not set +CONFIG_ATM_BR2684=m +# CONFIG_ATM_BR2684_IPFILTER is not set +CONFIG_L2TP=m +CONFIG_L2TP_DEBUGFS=m +CONFIG_L2TP_V3=y +CONFIG_L2TP_IP=m +CONFIG_L2TP_ETH=m +CONFIG_STP=m +CONFIG_GARP=m +CONFIG_MRP=m +CONFIG_BRIDGE=m +CONFIG_BRIDGE_IGMP_SNOOPING=y +CONFIG_BRIDGE_VLAN_FILTERING=y +CONFIG_HAVE_NET_DSA=y +# CONFIG_NET_DSA is not set +CONFIG_VLAN_8021Q=m +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_VLAN_8021Q_MVRP=y +# CONFIG_DECNET is not set +CONFIG_LLC=m +# CONFIG_LLC2 is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_PHONET is not set +CONFIG_6LOWPAN=m +# CONFIG_6LOWPAN_DEBUGFS is not set +# CONFIG_6LOWPAN_NHC is not set +CONFIG_IEEE802154=m +# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set +CONFIG_IEEE802154_SOCKET=m +CONFIG_IEEE802154_6LOWPAN=m +CONFIG_MAC802154=m +CONFIG_NET_SCHED=y + +# +# Queueing/Scheduling +# +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_ATM=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_MULTIQ=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFB=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +# CONFIG_NET_SCH_CBS is not set +# CONFIG_NET_SCH_ETF is not set +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +CONFIG_NET_SCH_NETEM=m +CONFIG_NET_SCH_DRR=m +CONFIG_NET_SCH_MQPRIO=m +# CONFIG_NET_SCH_SKBPRIO is not set +CONFIG_NET_SCH_CHOKE=m +CONFIG_NET_SCH_QFQ=m +CONFIG_NET_SCH_CODEL=m +CONFIG_NET_SCH_FQ_CODEL=y +# CONFIG_NET_SCH_CAKE is not set +CONFIG_NET_SCH_FQ=m +CONFIG_NET_SCH_HHF=m +CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_DEFAULT=y +# CONFIG_DEFAULT_FQ is not set +# CONFIG_DEFAULT_CODEL is not set +CONFIG_DEFAULT_FQ_CODEL=y +# CONFIG_DEFAULT_SFQ is not set +# CONFIG_DEFAULT_PFIFO_FAST is not set +CONFIG_DEFAULT_NET_SCH="fq_codel" + +# +# Classification +# +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +CONFIG_CLS_U32_PERF=y +CONFIG_CLS_U32_MARK=y +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +CONFIG_NET_CLS_FLOW=m +CONFIG_NET_CLS_CGROUP=y +CONFIG_NET_CLS_BPF=m +CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m +CONFIG_NET_EMATCH=y +CONFIG_NET_EMATCH_STACK=32 +CONFIG_NET_EMATCH_CMP=m +CONFIG_NET_EMATCH_NBYTE=m +CONFIG_NET_EMATCH_U32=m +CONFIG_NET_EMATCH_META=m +CONFIG_NET_EMATCH_TEXT=m +# CONFIG_NET_EMATCH_CANID is not set +CONFIG_NET_EMATCH_IPSET=m +# CONFIG_NET_EMATCH_IPT is not set +CONFIG_NET_CLS_ACT=y +CONFIG_NET_ACT_POLICE=m +CONFIG_NET_ACT_GACT=m +CONFIG_GACT_PROB=y +CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_SAMPLE=m +# CONFIG_NET_ACT_IPT is not set +CONFIG_NET_ACT_NAT=m +CONFIG_NET_ACT_PEDIT=m +CONFIG_NET_ACT_SIMP=m +CONFIG_NET_ACT_SKBEDIT=m +CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_VLAN=m +CONFIG_NET_ACT_BPF=m +# CONFIG_NET_ACT_CONNMARK is not set +CONFIG_NET_ACT_SKBMOD=m +# CONFIG_NET_ACT_IFE is not set +CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_CLS_IND=y +CONFIG_NET_SCH_FIFO=y +CONFIG_DCB=y +CONFIG_DNS_RESOLVER=m +# CONFIG_BATMAN_ADV is not set +CONFIG_OPENVSWITCH=m +CONFIG_OPENVSWITCH_GRE=m +CONFIG_OPENVSWITCH_VXLAN=m +CONFIG_OPENVSWITCH_GENEVE=m +CONFIG_VSOCKETS=m +CONFIG_VSOCKETS_DIAG=m +CONFIG_VMWARE_VMCI_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS_COMMON=m +CONFIG_HYPERV_VSOCKETS=m +CONFIG_NETLINK_DIAG=m +CONFIG_MPLS=y +CONFIG_NET_MPLS_GSO=y +CONFIG_MPLS_ROUTING=m +CONFIG_MPLS_IPTUNNEL=m +CONFIG_NET_NSH=y +# CONFIG_HSR is not set +CONFIG_NET_SWITCHDEV=y +CONFIG_NET_L3_MASTER_DEV=y +# CONFIG_NET_NCSI is not set +CONFIG_RPS=y +CONFIG_RFS_ACCEL=y +CONFIG_XPS=y +CONFIG_CGROUP_NET_PRIO=y +CONFIG_CGROUP_NET_CLASSID=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_BQL=y +CONFIG_BPF_JIT=y +CONFIG_BPF_STREAM_PARSER=y +CONFIG_NET_FLOW_LIMIT=y + +# +# Network testing +# +CONFIG_NET_PKTGEN=m +CONFIG_NET_DROP_MONITOR=y +# CONFIG_HAMRADIO is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m +CONFIG_CAN_GW=m + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=m +# CONFIG_CAN_VXCAN is not set +CONFIG_CAN_SLCAN=m +CONFIG_CAN_DEV=m +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_C_CAN=m +CONFIG_CAN_C_CAN_PLATFORM=m +CONFIG_CAN_C_CAN_PCI=m +CONFIG_CAN_CC770=m +# CONFIG_CAN_CC770_ISA is not set +CONFIG_CAN_CC770_PLATFORM=m +# CONFIG_CAN_IFI_CANFD is not set +# CONFIG_CAN_M_CAN is not set +# CONFIG_CAN_PEAK_PCIEFD is not set +CONFIG_CAN_SJA1000=m +# CONFIG_CAN_SJA1000_ISA is not set +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_PEAK_PCIEC=y +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SOFTING=m + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set + +# +# CAN USB interfaces +# +CONFIG_CAN_8DEV_USB=m +CONFIG_CAN_EMS_USB=m +CONFIG_CAN_ESD_USB2=m +# CONFIG_CAN_GS_USB is not set +CONFIG_CAN_KVASER_USB=m +# CONFIG_CAN_MCBA_USB is not set +CONFIG_CAN_PEAK_USB=m +# CONFIG_CAN_UCAN is not set +# CONFIG_CAN_DEBUG_DEVICES is not set +CONFIG_BT=m +CONFIG_BT_BREDR=y +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_CMTP=m +CONFIG_BT_HIDP=m +CONFIG_BT_HS=y +CONFIG_BT_LE=y +# CONFIG_BT_6LOWPAN is not set +# CONFIG_BT_LEDS is not set +# CONFIG_BT_SELFTEST is not set +CONFIG_BT_DEBUGFS=y + +# +# Bluetooth device drivers +# +CONFIG_BT_INTEL=m +CONFIG_BT_BCM=m +CONFIG_BT_RTL=m +CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y +CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTUSB_RTL=y +CONFIG_BT_HCIBTSDIO=m +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_ATH3K=y +# CONFIG_BT_HCIUART_INTEL is not set +# CONFIG_BT_HCIUART_AG6XX is not set +# CONFIG_BT_HCIUART_MRVL is not set +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +CONFIG_BT_MRVL=m +CONFIG_BT_MRVL_SDIO=m +CONFIG_BT_ATH3K=m +# CONFIG_AF_RXRPC is not set +# CONFIG_AF_KCM is not set +CONFIG_STREAM_PARSER=y +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set +CONFIG_CFG80211_CRDA_SUPPORT=y +# CONFIG_CFG80211_WEXT is not set +CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y +CONFIG_MAC80211_RC_MINSTREL=y +CONFIG_MAC80211_RC_MINSTREL_HT=y +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +CONFIG_MAC80211_DEBUGFS=y +# CONFIG_MAC80211_MESSAGE_TRACING is not set +# CONFIG_MAC80211_DEBUG_MENU is not set +CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 +# CONFIG_WIMAX is not set +CONFIG_RFKILL=m +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y +# CONFIG_RFKILL_GPIO is not set +# CONFIG_NET_9P is not set +# CONFIG_CAIF is not set +CONFIG_CEPH_LIB=m +# CONFIG_CEPH_LIB_PRETTYDEBUG is not set +CONFIG_CEPH_LIB_USE_DNS_RESOLVER=y +# CONFIG_NFC is not set +CONFIG_PSAMPLE=m +# CONFIG_NET_IFE is not set +CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y +CONFIG_DST_CACHE=y +CONFIG_GRO_CELLS=y +CONFIG_SOCK_VALIDATE_XMIT=y +CONFIG_NET_DEVLINK=y +CONFIG_MAY_USE_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=m +CONFIG_HAVE_EBPF_JIT=y + +# +# Device Drivers +# + +# +# Generic Driver Options +# +# CONFIG_UEVENT_HELPER is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# +CONFIG_FW_LOADER=y +CONFIG_EXTRA_FIRMWARE="" +CONFIG_FW_LOADER_USER_HELPER=y +# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_WANT_DEV_COREDUMP=y +CONFIG_ALLOW_DEV_COREDUMP=y +CONFIG_DEV_COREDUMP=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set +CONFIG_SYS_HYPERVISOR=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_CPU_VULNERABILITIES=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_SPI=y +CONFIG_DMA_SHARED_BUFFER=y +# CONFIG_DMA_FENCE_TRACE is not set + +# +# Bus devices +# +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_GNSS is not set +CONFIG_MTD=m +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# Partition parsers +# + +# +# User Modules And Translation Layers +# +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set +# CONFIG_MTD_OOPS is not set +# CONFIG_MTD_SWAP is not set +# CONFIG_MTD_PARTITIONED_MASTER is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOCG3 is not set +# CONFIG_MTD_ONENAND is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_SPI_NAND is not set + +# +# LPDDR & LPDDR2 PCM memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_SPI_NOR is not set +CONFIG_MTD_UBI=m +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_LIMIT=20 +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +# CONFIG_MTD_UBI_BLOCK is not set +CONFIG_MTD_HISILICON_SFC=m +# CONFIG_OF is not set +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_PARPORT=m +CONFIG_PARPORT_PC=m +CONFIG_PARPORT_SERIAL=m +# CONFIG_PARPORT_PC_FIFO is not set +# CONFIG_PARPORT_PC_SUPERIO is not set +# CONFIG_PARPORT_AX88796 is not set +CONFIG_PARPORT_1284=y +CONFIG_PARPORT_NOT_PC=y +CONFIG_PNP=y +# CONFIG_PNP_DEBUG_MESSAGES is not set + +# +# Protocols +# +CONFIG_PNPACPI=y +CONFIG_BLK_DEV=y +CONFIG_BLK_DEV_NULL_BLK=m +# CONFIG_BLK_DEV_FD is not set +CONFIG_CDROM=m +# CONFIG_PARIDE is not set +# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set +CONFIG_ZRAM=m +CONFIG_ZRAM_WRITEBACK=y +# CONFIG_ZRAM_MEMORY_TRACKING is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_LOOP_MIN_COUNT=0 +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_DRBD is not set +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SKD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=m +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_CDROM_PKTCDVD=m +CONFIG_CDROM_PKTCDVD_BUFFERS=8 +# CONFIG_CDROM_PKTCDVD_WCACHE is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_XEN_BLKDEV_FRONTEND=m +CONFIG_VIRTIO_BLK=m +# CONFIG_VIRTIO_BLK_SCSI is not set +CONFIG_BLK_DEV_RBD=m +# CONFIG_BLK_DEV_RSXX is not set + +# +# NVME Support +# +CONFIG_NVME_CORE=m +CONFIG_BLK_DEV_NVME=m +CONFIG_NVME_MULTIPATH=y +CONFIG_NVME_FABRICS=m +CONFIG_NVME_RDMA=m +CONFIG_NVME_FC=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_RDMA=m +CONFIG_NVME_TARGET_FC=m +CONFIG_NVME_TARGET_FCLOOP=m + +# +# Misc devices +# +CONFIG_SENSORS_LIS3LV02D=m +# CONFIG_AD525X_DPOT is not set +# CONFIG_DUMMY_IRQ is not set +# CONFIG_IBM_ASM is not set +# CONFIG_PHANTOM is not set +CONFIG_SGI_IOC4=m +CONFIG_TIFM_CORE=m +CONFIG_TIFM_7XX1=m +# CONFIG_ICS932S401 is not set +CONFIG_ENCLOSURE_SERVICES=m +CONFIG_SGI_XP=m +CONFIG_HP_ILO=m +CONFIG_SGI_GRU=m +# CONFIG_SGI_GRU_DEBUG is not set +CONFIG_APDS9802ALS=m +CONFIG_ISL29003=m +CONFIG_ISL29020=m +CONFIG_SENSORS_TSL2550=m +CONFIG_SENSORS_BH1770=m +CONFIG_SENSORS_APDS990X=m +# CONFIG_HMC6352 is not set +# CONFIG_DS1682 is not set +CONFIG_VMWARE_BALLOON=m +# CONFIG_USB_SWITCH_FSA9480 is not set +# CONFIG_LATTICE_ECP3_CONFIG is not set +# CONFIG_SRAM is not set +# CONFIG_PCI_ENDPOINT_TEST is not set +CONFIG_MISC_RTSX=m +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_AT25 is not set +CONFIG_EEPROM_LEGACY=m +CONFIG_EEPROM_MAX6875=m +CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +# CONFIG_EEPROM_IDT_89HPESX is not set +CONFIG_CB710_CORE=m +# CONFIG_CB710_DEBUG is not set +CONFIG_CB710_DEBUG_ASSUMPTIONS=y + +# +# Texas Instruments shared transport line discipline +# +# CONFIG_TI_ST is not set +CONFIG_SENSORS_LIS3_I2C=m +CONFIG_ALTERA_STAPL=m +CONFIG_INTEL_MEI=m +CONFIG_INTEL_MEI_ME=m +# CONFIG_INTEL_MEI_TXE is not set +CONFIG_VMWARE_VMCI=m + +# +# Intel MIC & related support +# + +# +# Intel MIC Bus Driver +# +# CONFIG_INTEL_MIC_BUS is not set + +# +# SCIF Bus Driver +# +# CONFIG_SCIF_BUS is not set + +# +# VOP Bus Driver +# +# CONFIG_VOP_BUS is not set + +# +# Intel MIC Host Driver +# + +# +# Intel MIC Card Driver +# + +# +# SCIF Driver +# + +# +# Intel MIC Coprocessor State Management (COSM) Drivers +# + +# +# VOP Driver +# +# CONFIG_GENWQE is not set +# CONFIG_ECHO is not set +CONFIG_MISC_RTSX_PCI=m +CONFIG_MISC_RTSX_USB=m +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +CONFIG_SCSI_MOD=y +CONFIG_RAID_ATTRS=m +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +CONFIG_SCSI_NETLINK=y +CONFIG_SCSI_MQ_DEFAULT=y +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +# CONFIG_CHR_DEV_OSST is not set +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_CHR_DEV_SCH=m +CONFIG_SCSI_ENCLOSURE=m +CONFIG_SCSI_CONSTANTS=y +CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_SCAN_ASYNC=y + +# +# SCSI Transports +# +CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=m +CONFIG_SCSI_ISCSI_ATTRS=m +CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_ATA=y +CONFIG_SCSI_SAS_HOST_SMP=y +CONFIG_SCSI_SRP_ATTRS=m +CONFIG_SCSI_LOWLEVEL=y +CONFIG_ISCSI_TCP=m +CONFIG_ISCSI_BOOT_SYSFS=m +# CONFIG_SCSI_CXGB3_ISCSI is not set +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2X_FCOE=m +CONFIG_BE2ISCSI=m +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +CONFIG_SCSI_HPSA=m +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_3W_SAS is not set +# CONFIG_SCSI_ACARD is not set +CONFIG_SCSI_AACRAID=m +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_MVSAS is not set +# CONFIG_SCSI_MVUMI is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ADVANSYS is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_SCSI_ESAS2R is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +CONFIG_MEGARAID_SAS=m +CONFIG_SCSI_MPT3SAS=m +CONFIG_SCSI_MPT2SAS_MAX_SGE=128 +CONFIG_SCSI_MPT3SAS_MAX_SGE=128 +CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SMARTPQI=m +# CONFIG_SCSI_UFSHCD is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_BUSLOGIC is not set +CONFIG_VMWARE_PVSCSI=m +# CONFIG_XEN_SCSI_FRONTEND is not set +CONFIG_HYPERV_STORAGE=m +CONFIG_LIBFC=m +CONFIG_LIBFCOE=m +# CONFIG_FCOE is not set +CONFIG_FCOE_FNIC=m +# CONFIG_SCSI_SNIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_ISCI is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_PPA is not set +# CONFIG_SCSI_IMM is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +CONFIG_SCSI_QLA_FC=m +# CONFIG_TCM_QLA2XXX is not set +CONFIG_SCSI_QLA_ISCSI=m +CONFIG_QEDI=m +CONFIG_QEDF=m +CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_AM53C974 is not set +# CONFIG_SCSI_WD719X is not set +CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_PMCRAID is not set +# CONFIG_SCSI_PM8001 is not set +# CONFIG_SCSI_BFA_FC is not set +CONFIG_SCSI_VIRTIO=m +CONFIG_SCSI_CHELSIO_FCOE=m +CONFIG_SCSI_DH=y +CONFIG_SCSI_DH_RDAC=y +CONFIG_SCSI_DH_HP_SW=y +CONFIG_SCSI_DH_EMC=y +CONFIG_SCSI_DH_ALUA=y +# CONFIG_SCSI_OSD_INITIATOR is not set +CONFIG_ATA=m +CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_ACPI=y +# CONFIG_SATA_ZPODD is not set +CONFIG_SATA_PMP=y + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=m +CONFIG_SATA_MOBILE_LPM_POLICY=0 +CONFIG_SATA_AHCI_PLATFORM=m +# CONFIG_SATA_INIC162X is not set +# CONFIG_SATA_ACARD_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y + +# +# SFF controllers with custom DMA interface +# +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_SX4 is not set +CONFIG_ATA_BMDMA=y + +# +# SATA SFF controllers with BMDMA +# +CONFIG_ATA_PIIX=m +# CONFIG_SATA_DWC is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_SVW is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set + +# +# PATA SFF controllers with BMDMA +# +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_ATP867X is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RDC is not set +# CONFIG_PATA_SCH is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_TOSHIBA is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# +# PIO-only SFF controllers +# +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_RZ1000 is not set + +# +# Generic fallback / legacy drivers +# +# CONFIG_PATA_ACPI is not set +CONFIG_ATA_GENERIC=m +# CONFIG_PATA_LEGACY is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=y +CONFIG_MD_AUTODETECT=y +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +# CONFIG_MD_MULTIPATH is not set +CONFIG_MD_FAULTY=m +# CONFIG_MD_CLUSTER is not set +# CONFIG_BCACHE is not set +CONFIG_BLK_DEV_DM_BUILTIN=y +CONFIG_BLK_DEV_DM=m +# CONFIG_DM_MQ_DEFAULT is not set +CONFIG_DM_DEBUG=y +CONFIG_DM_BUFIO=m +# CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING is not set +CONFIG_DM_BIO_PRISON=m +CONFIG_DM_PERSISTENT_DATA=m +# CONFIG_DM_UNSTRIPED is not set +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_THIN_PROVISIONING=m +CONFIG_DM_CACHE=m +CONFIG_DM_CACHE_SMQ=m +CONFIG_DM_WRITECACHE=m +CONFIG_DM_ERA=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_RAID=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y +CONFIG_DM_FLAKEY=m +CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_FEC is not set +CONFIG_DM_SWITCH=m +CONFIG_DM_LOG_WRITES=m +CONFIG_DM_INTEGRITY=m +CONFIG_TARGET_CORE=m +CONFIG_TCM_IBLOCK=m +CONFIG_TCM_FILEIO=m +CONFIG_TCM_PSCSI=m +CONFIG_TCM_USER2=m +CONFIG_LOOPBACK_TARGET=m +# CONFIG_TCM_FC is not set +CONFIG_ISCSI_TARGET=m +CONFIG_ISCSI_TARGET_CXGB4=m +# CONFIG_SBP_TARGET is not set +CONFIG_FUSION=y +CONFIG_FUSION_SPI=m +# CONFIG_FUSION_FC is not set +CONFIG_FUSION_SAS=m +CONFIG_FUSION_MAX_SGE=128 +# CONFIG_FUSION_CTL is not set +CONFIG_FUSION_LOGGING=y + +# +# IEEE 1394 (FireWire) support +# +CONFIG_FIREWIRE=m +CONFIG_FIREWIRE_OHCI=m +CONFIG_FIREWIRE_SBP2=m +CONFIG_FIREWIRE_NET=m +# CONFIG_FIREWIRE_NOSY is not set +CONFIG_MACINTOSH_DRIVERS=y +CONFIG_MAC_EMUMOUSEBTN=y +CONFIG_NETDEVICES=y +CONFIG_MII=m +CONFIG_NET_CORE=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +# CONFIG_EQUALIZER is not set +CONFIG_NET_FC=y +CONFIG_IFB=m +CONFIG_NET_TEAM=m +CONFIG_NET_TEAM_MODE_BROADCAST=m +CONFIG_NET_TEAM_MODE_ROUNDROBIN=m +CONFIG_NET_TEAM_MODE_RANDOM=m +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m +CONFIG_NET_TEAM_MODE_LOADBALANCE=m +CONFIG_MACVLAN=m +CONFIG_MACVTAP=m +CONFIG_IPVLAN=m +CONFIG_IPVTAP=m +CONFIG_VXLAN=m +CONFIG_GENEVE=m +# CONFIG_GTP is not set +CONFIG_MACSEC=m +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +CONFIG_NET_POLL_CONTROLLER=y +CONFIG_TUN=m +CONFIG_TAP=m +# CONFIG_TUN_VNET_CROSS_LE is not set +CONFIG_VETH=m +CONFIG_VIRTIO_NET=m +CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_VSOCKMON=m +# CONFIG_ARCNET is not set +# CONFIG_ATM_DRIVERS is not set + +# +# CAIF transport drivers +# + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_MDIO=m +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_VENDOR_ADAPTEC is not set +# CONFIG_NET_VENDOR_AGERE is not set +# CONFIG_NET_VENDOR_ALACRITECH is not set +# CONFIG_NET_VENDOR_ALTEON is not set +# CONFIG_ALTERA_TSE is not set +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_ENA_ETHERNET=m +CONFIG_NET_VENDOR_AMD=y +# CONFIG_AMD8111_ETH is not set +# CONFIG_PCNET32 is not set +CONFIG_AMD_XGBE=m +# CONFIG_AMD_XGBE_DCB is not set +CONFIG_AMD_XGBE_HAVE_ECC=y +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_AQTION=m +# CONFIG_NET_VENDOR_ARC is not set +CONFIG_NET_VENDOR_ATHEROS=y +CONFIG_ATL2=m +CONFIG_ATL1=m +CONFIG_ATL1E=m +CONFIG_ATL1C=m +CONFIG_ALX=m +# CONFIG_NET_VENDOR_AURORA is not set +CONFIG_NET_VENDOR_BROADCOM=y +# CONFIG_B44 is not set +# CONFIG_BCMGENET is not set +CONFIG_BNX2=m +CONFIG_CNIC=m +CONFIG_TIGON3=m +CONFIG_TIGON3_HWMON=y +CONFIG_BNX2X=m +CONFIG_BNX2X_SRIOV=y +# CONFIG_SYSTEMPORT is not set +CONFIG_BNXT=m +CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_FLOWER_OFFLOAD=y +CONFIG_BNXT_DCB=y +CONFIG_BNXT_HWMON=y +CONFIG_NET_VENDOR_BROCADE=y +# CONFIG_BNA is not set +CONFIG_NET_VENDOR_CADENCE=y +# CONFIG_MACB is not set +CONFIG_NET_VENDOR_CAVIUM=y +# CONFIG_THUNDER_NIC_PF is not set +# CONFIG_THUNDER_NIC_VF is not set +# CONFIG_THUNDER_NIC_BGX is not set +# CONFIG_THUNDER_NIC_RGX is not set +CONFIG_CAVIUM_PTP=y +CONFIG_LIQUIDIO=m +CONFIG_LIQUIDIO_VF=m +CONFIG_NET_VENDOR_CHELSIO=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T4=m +# CONFIG_CHELSIO_T4_DCB is not set +CONFIG_CHELSIO_T4VF=m +CONFIG_CHELSIO_LIB=m +CONFIG_NET_VENDOR_CISCO=y +CONFIG_ENIC=m +# CONFIG_NET_VENDOR_CORTINA is not set +# CONFIG_CX_ECAT is not set +CONFIG_DNET=m +CONFIG_NET_VENDOR_DEC=y +# CONFIG_NET_TULIP is not set +CONFIG_NET_VENDOR_DLINK=y +CONFIG_DL2K=m +# CONFIG_SUNDANCE is not set +CONFIG_NET_VENDOR_EMULEX=y +CONFIG_BE2NET=m +CONFIG_BE2NET_HWMON=y +# CONFIG_BE2NET_BE2 is not set +# CONFIG_BE2NET_BE3 is not set +CONFIG_BE2NET_LANCER=y +CONFIG_BE2NET_SKYHAWK=y +# CONFIG_NET_VENDOR_EZCHIP is not set +# CONFIG_NET_VENDOR_HP is not set +# CONFIG_NET_VENDOR_I825XX is not set +CONFIG_NET_VENDOR_INTEL=y +# CONFIG_E100 is not set +CONFIG_E1000=m +CONFIG_E1000E=m +CONFIG_E1000E_HWTS=y +CONFIG_IGB=m +CONFIG_IGB_HWMON=y +CONFIG_IGB_DCA=y +CONFIG_IGBVF=m +# CONFIG_IXGB is not set +CONFIG_IXGBE=m +CONFIG_IXGBE_HWMON=y +CONFIG_IXGBE_DCA=y +CONFIG_IXGBE_DCB=y +CONFIG_IXGBEVF=m +CONFIG_I40E=m +CONFIG_I40E_DCB=y +CONFIG_I40EVF=m +CONFIG_ICE=m +CONFIG_FM10K=m +# CONFIG_JME is not set +# CONFIG_NET_VENDOR_MARVELL is not set +CONFIG_NET_VENDOR_MELLANOX=y +CONFIG_MLX4_EN=m +CONFIG_MLX4_EN_DCB=y +CONFIG_MLX4_CORE=m +CONFIG_MLX4_DEBUG=y +# CONFIG_MLX4_CORE_GEN2 is not set +CONFIG_MLX5_CORE=m +CONFIG_MLX5_ACCEL=y +CONFIG_MLX5_FPGA=y +CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +CONFIG_MLX5_ESWITCH=y +CONFIG_MLX5_CORE_EN_DCB=y +CONFIG_MLX5_CORE_IPOIB=y +CONFIG_MLX5_EN_IPSEC=y +# CONFIG_MLX5_EN_TLS is not set +CONFIG_MLXSW_CORE=m +CONFIG_MLXSW_CORE_HWMON=y +CONFIG_MLXSW_CORE_THERMAL=y +CONFIG_MLXSW_PCI=m +CONFIG_MLXSW_I2C=m +CONFIG_MLXSW_SWITCHIB=m +CONFIG_MLXSW_SWITCHX2=m +CONFIG_MLXSW_SPECTRUM=m +CONFIG_MLXSW_SPECTRUM_DCB=y +CONFIG_MLXSW_MINIMAL=m +CONFIG_MLXFW=m +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set +CONFIG_NET_VENDOR_MYRI=y +CONFIG_MYRI10GE=m +CONFIG_MYRI10GE_DCA=y +# CONFIG_FEALNX is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +CONFIG_NET_VENDOR_NETERION=y +# CONFIG_S2IO is not set +# CONFIG_VXGE is not set +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NFP=m +CONFIG_NFP_APP_FLOWER=y +CONFIG_NFP_APP_ABM_NIC=y +# CONFIG_NFP_DEBUG is not set +# CONFIG_NET_VENDOR_NI is not set +# CONFIG_NET_VENDOR_NVIDIA is not set +CONFIG_NET_VENDOR_OKI=y +CONFIG_ETHOC=m +CONFIG_NET_VENDOR_PACKET_ENGINES=y +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +CONFIG_NET_VENDOR_QLOGIC=y +CONFIG_QLA3XXX=m +# CONFIG_QLCNIC is not set +# CONFIG_QLGE is not set +CONFIG_NETXEN_NIC=m +CONFIG_QED=m +CONFIG_QED_LL2=y +CONFIG_QED_SRIOV=y +CONFIG_QEDE=m +CONFIG_QED_RDMA=y +CONFIG_QED_ISCSI=y +CONFIG_QED_FCOE=y +CONFIG_QED_OOO=y +# CONFIG_NET_VENDOR_QUALCOMM is not set +# CONFIG_NET_VENDOR_RDC is not set +CONFIG_NET_VENDOR_REALTEK=y +# CONFIG_ATP is not set +CONFIG_8139CP=m +CONFIG_8139TOO=m +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +CONFIG_R8169=m +# CONFIG_NET_VENDOR_RENESAS is not set +CONFIG_NET_VENDOR_ROCKER=y +CONFIG_ROCKER=m +# CONFIG_NET_VENDOR_SAMSUNG is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_NET_VENDOR_SOLARFLARE=y +CONFIG_SFC=m +CONFIG_SFC_MTD=y +CONFIG_SFC_MCDI_MON=y +CONFIG_SFC_SRIOV=y +CONFIG_SFC_MCDI_LOGGING=y +# CONFIG_SFC_FALCON is not set +# CONFIG_NET_VENDOR_SILAN is not set +# CONFIG_NET_VENDOR_SIS is not set +# CONFIG_NET_VENDOR_SMSC is not set +# CONFIG_NET_VENDOR_SOCIONEXT is not set +# CONFIG_NET_VENDOR_STMICRO is not set +# CONFIG_NET_VENDOR_SUN is not set +# CONFIG_NET_VENDOR_SYNOPSYS is not set +# CONFIG_NET_VENDOR_TEHUTI is not set +# CONFIG_NET_VENDOR_TI is not set +# CONFIG_NET_VENDOR_VIA is not set +# CONFIG_NET_VENDOR_WIZNET is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_NET_SB1000 is not set +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_BUS=y +# CONFIG_MDIO_BCM_UNIMAC is not set +CONFIG_MDIO_BITBANG=m +CONFIG_MDIO_CAVIUM=m +# CONFIG_MDIO_GPIO is not set +CONFIG_MDIO_MSCC_MIIM=m +CONFIG_MDIO_THUNDER=m +CONFIG_PHYLIB=y +CONFIG_SWPHY=y +CONFIG_LED_TRIGGER_PHY=y + +# +# MII PHY device drivers +# +CONFIG_AMD_PHY=m +CONFIG_AQUANTIA_PHY=m +# CONFIG_AX88796B_PHY is not set +CONFIG_AT803X_PHY=m +CONFIG_BCM7XXX_PHY=m +CONFIG_BCM87XX_PHY=m +CONFIG_BCM_NET_PHYLIB=m +CONFIG_BROADCOM_PHY=m +CONFIG_CICADA_PHY=m +CONFIG_CORTINA_PHY=m +CONFIG_DAVICOM_PHY=m +CONFIG_DP83822_PHY=m +CONFIG_DP83TC811_PHY=m +CONFIG_DP83848_PHY=m +CONFIG_DP83867_PHY=m +CONFIG_FIXED_PHY=y +CONFIG_ICPLUS_PHY=m +CONFIG_INTEL_XWAY_PHY=m +CONFIG_LSI_ET1011C_PHY=m +CONFIG_LXT_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MICREL_PHY=m +CONFIG_MICROCHIP_PHY=m +CONFIG_MICROCHIP_T1_PHY=m +CONFIG_MICROSEMI_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_RENESAS_PHY=m +CONFIG_ROCKCHIP_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_STE10XP=m +CONFIG_TERANETICS_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_XILINX_GMII2RGMII=m +CONFIG_MICREL_KS8995MA=m +# CONFIG_PLIP is not set +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MPPE=m +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOATM=m +CONFIG_PPPOE=m +CONFIG_PPTP=m +CONFIG_PPPOL2TP=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLHC=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +# CONFIG_SLIP_MODE_SLIP6 is not set +CONFIG_USB_NET_DRIVERS=y +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_RTL8152=m +CONFIG_USB_LAN78XX=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_AX88179_178A=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +CONFIG_USB_NET_CDC_NCM=m +CONFIG_USB_NET_HUAWEI_CDC_NCM=m +CONFIG_USB_NET_CDC_MBIM=m +CONFIG_USB_NET_DM9601=m +# CONFIG_USB_NET_SR9700 is not set +# CONFIG_USB_NET_SR9800 is not set +CONFIG_USB_NET_SMSC75XX=m +CONFIG_USB_NET_SMSC95XX=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_MCS7830=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_NET_CDC_SUBSET_ENABLE=m +CONFIG_USB_NET_CDC_SUBSET=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +CONFIG_USB_EPSON2888=y +CONFIG_USB_KC2190=y +CONFIG_USB_NET_ZAURUS=m +CONFIG_USB_NET_CX82310_ETH=m +CONFIG_USB_NET_KALMIA=m +CONFIG_USB_NET_QMI_WWAN=m +CONFIG_USB_HSO=m +CONFIG_USB_NET_INT51X1=m +CONFIG_USB_IPHETH=m +CONFIG_USB_SIERRA_NET=m +CONFIG_USB_VL600=m +CONFIG_USB_NET_CH9200=m +CONFIG_WLAN=y +# CONFIG_WLAN_VENDOR_ADMTEK is not set +CONFIG_ATH_COMMON=m +CONFIG_WLAN_VENDOR_ATH=y +# CONFIG_ATH_DEBUG is not set +# CONFIG_ATH5K is not set +# CONFIG_ATH5K_PCI is not set +CONFIG_ATH9K_HW=m +CONFIG_ATH9K_COMMON=m +CONFIG_ATH9K_COMMON_DEBUG=y +CONFIG_ATH9K_BTCOEX_SUPPORT=y +CONFIG_ATH9K=m +CONFIG_ATH9K_PCI=y +CONFIG_ATH9K_AHB=y +CONFIG_ATH9K_DEBUGFS=y +# CONFIG_ATH9K_STATION_STATISTICS is not set +# CONFIG_ATH9K_DYNACK is not set +CONFIG_ATH9K_WOW=y +CONFIG_ATH9K_RFKILL=y +# CONFIG_ATH9K_CHANNEL_CONTEXT is not set +CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_HTC=m +# CONFIG_ATH9K_HTC_DEBUGFS is not set +# CONFIG_ATH9K_HWRNG is not set +# CONFIG_ATH9K_COMMON_SPECTRAL is not set +# CONFIG_CARL9170 is not set +# CONFIG_ATH6KL is not set +# CONFIG_AR5523 is not set +# CONFIG_WIL6210 is not set +CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y +CONFIG_ATH10K_PCI=m +# CONFIG_ATH10K_SDIO is not set +# CONFIG_ATH10K_USB is not set +# CONFIG_ATH10K_DEBUG is not set +CONFIG_ATH10K_DEBUGFS=y +# CONFIG_ATH10K_SPECTRAL is not set +# CONFIG_ATH10K_TRACING is not set +# CONFIG_WCN36XX is not set +# CONFIG_WLAN_VENDOR_ATMEL is not set +CONFIG_WLAN_VENDOR_BROADCOM=y +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +CONFIG_BRCMUTIL=m +CONFIG_BRCMSMAC=m +CONFIG_BRCMFMAC=m +CONFIG_BRCMFMAC_PROTO_BCDC=y +CONFIG_BRCMFMAC_PROTO_MSGBUF=y +CONFIG_BRCMFMAC_SDIO=y +CONFIG_BRCMFMAC_USB=y +CONFIG_BRCMFMAC_PCIE=y +# CONFIG_BRCM_TRACING is not set +# CONFIG_BRCMDBG is not set +# CONFIG_WLAN_VENDOR_CISCO is not set +CONFIG_WLAN_VENDOR_INTEL=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +CONFIG_IWLWIFI=m +CONFIG_IWLWIFI_LEDS=y +CONFIG_IWLDVM=m +CONFIG_IWLMVM=m +CONFIG_IWLWIFI_OPMODE_MODULAR=y +# CONFIG_IWLWIFI_BCAST_FILTERING is not set + +# +# Debugging Options +# +# CONFIG_IWLWIFI_DEBUG is not set +CONFIG_IWLWIFI_DEBUGFS=y +# CONFIG_IWLWIFI_DEVICE_TRACING is not set +# CONFIG_WLAN_VENDOR_INTERSIL is not set +CONFIG_WLAN_VENDOR_MARVELL=y +# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_MWIFIEX_USB=m +# CONFIG_MWL8K is not set +CONFIG_WLAN_VENDOR_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_MT76_CORE=m +CONFIG_MT76_LEDS=y +CONFIG_MT76_USB=m +CONFIG_MT76x2_COMMON=m +CONFIG_MT76x0U=m +# CONFIG_MT76x2E is not set +CONFIG_MT76x2U=m +CONFIG_WLAN_VENDOR_RALINK=y +CONFIG_RT2X00=m +# CONFIG_RT2400PCI is not set +# CONFIG_RT2500PCI is not set +# CONFIG_RT61PCI is not set +CONFIG_RT2800PCI=m +CONFIG_RT2800PCI_RT33XX=y +CONFIG_RT2800PCI_RT35XX=y +CONFIG_RT2800PCI_RT53XX=y +CONFIG_RT2800PCI_RT3290=y +# CONFIG_RT2500USB is not set +# CONFIG_RT73USB is not set +CONFIG_RT2800USB=m +CONFIG_RT2800USB_RT33XX=y +CONFIG_RT2800USB_RT35XX=y +CONFIG_RT2800USB_RT3573=y +CONFIG_RT2800USB_RT53XX=y +CONFIG_RT2800USB_RT55XX=y +CONFIG_RT2800USB_UNKNOWN=y +CONFIG_RT2800_LIB=m +CONFIG_RT2800_LIB_MMIO=m +CONFIG_RT2X00_LIB_MMIO=m +CONFIG_RT2X00_LIB_PCI=m +CONFIG_RT2X00_LIB_USB=m +CONFIG_RT2X00_LIB=m +CONFIG_RT2X00_LIB_FIRMWARE=y +CONFIG_RT2X00_LIB_CRYPTO=y +CONFIG_RT2X00_LIB_LEDS=y +CONFIG_RT2X00_LIB_DEBUGFS=y +# CONFIG_RT2X00_DEBUG is not set +CONFIG_WLAN_VENDOR_REALTEK=y +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +CONFIG_RTL_CARDS=m +CONFIG_RTL8192CE=m +CONFIG_RTL8192SE=m +CONFIG_RTL8192DE=m +CONFIG_RTL8723AE=m +CONFIG_RTL8723BE=m +CONFIG_RTL8188EE=m +CONFIG_RTL8192EE=m +CONFIG_RTL8821AE=m +CONFIG_RTL8192CU=m +CONFIG_RTLWIFI=m +CONFIG_RTLWIFI_PCI=m +CONFIG_RTLWIFI_USB=m +# CONFIG_RTLWIFI_DEBUG is not set +CONFIG_RTL8192C_COMMON=m +CONFIG_RTL8723_COMMON=m +CONFIG_RTLBTCOEXIST=m +CONFIG_RTL8XXXU=m +# CONFIG_RTL8XXXU_UNTESTED is not set +# CONFIG_WLAN_VENDOR_RSI is not set +# CONFIG_WLAN_VENDOR_ST is not set +# CONFIG_WLAN_VENDOR_TI is not set +# CONFIG_WLAN_VENDOR_ZYDAS is not set +CONFIG_WLAN_VENDOR_QUANTENNA=y +# CONFIG_QTNFMAC_PEARL_PCIE is not set +CONFIG_MAC80211_HWSIM=m +# CONFIG_USB_NET_RNDIS_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# +CONFIG_WAN=y +# CONFIG_LANMEDIA is not set +CONFIG_HDLC=m +CONFIG_HDLC_RAW=m +# CONFIG_HDLC_RAW_ETH is not set +CONFIG_HDLC_CISCO=m +CONFIG_HDLC_FR=m +CONFIG_HDLC_PPP=m + +# +# X.25/LAPB support is disabled +# +# CONFIG_PCI200SYN is not set +# CONFIG_WANXL is not set +# CONFIG_PC300TOO is not set +# CONFIG_FARSYNC is not set +# CONFIG_DSCC4 is not set +CONFIG_DLCI=m +CONFIG_DLCI_MAX=8 +# CONFIG_SBNI is not set +CONFIG_IEEE802154_DRIVERS=m +CONFIG_IEEE802154_FAKELB=m +# CONFIG_IEEE802154_AT86RF230 is not set +# CONFIG_IEEE802154_MRF24J40 is not set +# CONFIG_IEEE802154_CC2520 is not set +# CONFIG_IEEE802154_ATUSB is not set +# CONFIG_IEEE802154_ADF7242 is not set +# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_IEEE802154_MCR20A is not set +# CONFIG_IEEE802154_HWSIM is not set +CONFIG_XEN_NETDEV_FRONTEND=m +CONFIG_VMXNET3=m +CONFIG_FUJITSU_ES=m +CONFIG_THUNDERBOLT_NET=m +CONFIG_HYPERV_NET=m +CONFIG_NETDEVSIM=m +CONFIG_NET_FAILOVER=m +CONFIG_ISDN=y +CONFIG_ISDN_I4L=m +CONFIG_ISDN_PPP=y +CONFIG_ISDN_PPP_VJ=y +CONFIG_ISDN_MPP=y +CONFIG_IPPP_FILTER=y +# CONFIG_ISDN_PPP_BSDCOMP is not set +CONFIG_ISDN_AUDIO=y +CONFIG_ISDN_TTY_FAX=y + +# +# ISDN feature submodules +# +CONFIG_ISDN_DIVERSION=m + +# +# ISDN4Linux hardware drivers +# + +# +# Passive cards +# +CONFIG_ISDN_DRV_HISAX=m + +# +# D-channel protocol features +# +CONFIG_HISAX_EURO=y +CONFIG_DE_AOC=y +CONFIG_HISAX_NO_SENDCOMPLETE=y +CONFIG_HISAX_NO_LLC=y +CONFIG_HISAX_NO_KEYPAD=y +CONFIG_HISAX_1TR6=y +CONFIG_HISAX_NI1=y +CONFIG_HISAX_MAX_CARDS=8 + +# +# HiSax supported cards +# +CONFIG_HISAX_16_3=y +CONFIG_HISAX_TELESPCI=y +CONFIG_HISAX_S0BOX=y +CONFIG_HISAX_FRITZPCI=y +CONFIG_HISAX_AVM_A1_PCMCIA=y +CONFIG_HISAX_ELSA=y +CONFIG_HISAX_DIEHLDIVA=y +CONFIG_HISAX_SEDLBAUER=y +CONFIG_HISAX_NETJET=y +CONFIG_HISAX_NETJET_U=y +CONFIG_HISAX_NICCY=y +CONFIG_HISAX_BKM_A4T=y +CONFIG_HISAX_SCT_QUADRO=y +CONFIG_HISAX_GAZEL=y +CONFIG_HISAX_HFC_PCI=y +CONFIG_HISAX_W6692=y +CONFIG_HISAX_HFC_SX=y +CONFIG_HISAX_ENTERNOW_PCI=y +# CONFIG_HISAX_DEBUG is not set + +# +# HiSax PCMCIA card service modules +# + +# +# HiSax sub driver modules +# +CONFIG_HISAX_ST5481=m +# CONFIG_HISAX_HFCUSB is not set +CONFIG_HISAX_HFC4S8S=m +CONFIG_HISAX_FRITZ_PCIPNP=m +CONFIG_ISDN_CAPI=m +# CONFIG_CAPI_TRACE is not set +CONFIG_ISDN_CAPI_CAPI20=m +CONFIG_ISDN_CAPI_MIDDLEWARE=y +CONFIG_ISDN_CAPI_CAPIDRV=m +CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE=y + +# +# CAPI hardware drivers +# +CONFIG_CAPI_AVM=y +CONFIG_ISDN_DRV_AVMB1_B1PCI=m +CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y +CONFIG_ISDN_DRV_AVMB1_T1PCI=m +CONFIG_ISDN_DRV_AVMB1_C4=m +# CONFIG_CAPI_EICON is not set +CONFIG_ISDN_DRV_GIGASET=m +CONFIG_GIGASET_CAPI=y +CONFIG_GIGASET_BASE=m +CONFIG_GIGASET_M105=m +CONFIG_GIGASET_M101=m +# CONFIG_GIGASET_DEBUG is not set +CONFIG_HYSDN=m +CONFIG_HYSDN_CAPI=y +CONFIG_MISDN=m +CONFIG_MISDN_DSP=m +CONFIG_MISDN_L1OIP=m + +# +# mISDN hardware drivers +# +CONFIG_MISDN_HFCPCI=m +CONFIG_MISDN_HFCMULTI=m +CONFIG_MISDN_HFCUSB=m +CONFIG_MISDN_AVMFRITZ=m +CONFIG_MISDN_SPEEDFAX=m +CONFIG_MISDN_INFINEON=m +CONFIG_MISDN_W6692=m +CONFIG_MISDN_NETJET=m +CONFIG_MISDN_IPAC=m +CONFIG_MISDN_ISAR=m +CONFIG_ISDN_HDLC=m +# CONFIG_NVM is not set + +# +# Input device support +# +CONFIG_INPUT=y +CONFIG_INPUT_LEDS=y +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +CONFIG_INPUT_SPARSEKMAP=m +# CONFIG_INPUT_MATRIXKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +CONFIG_INPUT_JOYDEV=m +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set +# CONFIG_KEYBOARD_ADP5588 is not set +# CONFIG_KEYBOARD_ADP5589 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_QT1070 is not set +# CONFIG_KEYBOARD_QT2160 is not set +# CONFIG_KEYBOARD_DLINK_DIR685 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_GPIO_POLLED is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_TCA8418 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_LM8323 is not set +# CONFIG_KEYBOARD_LM8333 is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_MCS is not set +# CONFIG_KEYBOARD_MPR121 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_SAMSUNG is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_TM2_TOUCHKEY is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y +CONFIG_MOUSE_PS2_CYPRESS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y +CONFIG_MOUSE_PS2_SENTELIC=y +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +CONFIG_MOUSE_PS2_FOCALTECH=y +CONFIG_MOUSE_PS2_VMMOUSE=y +CONFIG_MOUSE_PS2_SMBUS=y +CONFIG_MOUSE_SERIAL=m +CONFIG_MOUSE_APPLETOUCH=m +CONFIG_MOUSE_BCM5974=m +CONFIG_MOUSE_CYAPA=m +CONFIG_MOUSE_ELAN_I2C=m +CONFIG_MOUSE_ELAN_I2C_I2C=y +CONFIG_MOUSE_ELAN_I2C_SMBUS=y +CONFIG_MOUSE_VSXXXAA=m +# CONFIG_MOUSE_GPIO is not set +CONFIG_MOUSE_SYNAPTICS_I2C=m +CONFIG_MOUSE_SYNAPTICS_USB=m +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TABLET=y +CONFIG_TABLET_USB_ACECAD=m +CONFIG_TABLET_USB_AIPTEK=m +CONFIG_TABLET_USB_GTCO=m +# CONFIG_TABLET_USB_HANWANG is not set +CONFIG_TABLET_USB_KBTAB=m +# CONFIG_TABLET_USB_PEGASUS is not set +CONFIG_TABLET_SERIAL_WACOM4=m +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_PROPERTIES=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set +# CONFIG_TOUCHSCREEN_AD7879 is not set +# CONFIG_TOUCHSCREEN_ADC is not set +# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set +# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set +# CONFIG_TOUCHSCREEN_BU21013 is not set +# CONFIG_TOUCHSCREEN_BU21029 is not set +# CONFIG_TOUCHSCREEN_CHIPONE_ICN8505 is not set +# CONFIG_TOUCHSCREEN_CY8CTMG110 is not set +# CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set +# CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set +# CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set +# CONFIG_TOUCHSCREEN_EETI is not set +# CONFIG_TOUCHSCREEN_EGALAX_SERIAL is not set +# CONFIG_TOUCHSCREEN_EXC3000 is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_GOODIX is not set +# CONFIG_TOUCHSCREEN_HIDEEP is not set +# CONFIG_TOUCHSCREEN_ILI210X is not set +# CONFIG_TOUCHSCREEN_S6SY761 is not set +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_EKTF2127 is not set +# CONFIG_TOUCHSCREEN_ELAN is not set +CONFIG_TOUCHSCREEN_ELO=m +CONFIG_TOUCHSCREEN_WACOM_W8001=m +CONFIG_TOUCHSCREEN_WACOM_I2C=m +# CONFIG_TOUCHSCREEN_MAX11801 is not set +# CONFIG_TOUCHSCREEN_MCS5000 is not set +# CONFIG_TOUCHSCREEN_MMS114 is not set +# CONFIG_TOUCHSCREEN_MELFAS_MIP4 is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_PIXCIR is not set +# CONFIG_TOUCHSCREEN_WDT87XX_I2C is not set +# CONFIG_TOUCHSCREEN_WM97XX is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set +# CONFIG_TOUCHSCREEN_TSC_SERIO is not set +# CONFIG_TOUCHSCREEN_TSC2004 is not set +# CONFIG_TOUCHSCREEN_TSC2005 is not set +# CONFIG_TOUCHSCREEN_TSC2007 is not set +# CONFIG_TOUCHSCREEN_RM_TS is not set +# CONFIG_TOUCHSCREEN_SILEAD is not set +# CONFIG_TOUCHSCREEN_SIS_I2C is not set +# CONFIG_TOUCHSCREEN_ST1232 is not set +# CONFIG_TOUCHSCREEN_STMFTS is not set +# CONFIG_TOUCHSCREEN_SUR40 is not set +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set +# CONFIG_TOUCHSCREEN_SX8654 is not set +# CONFIG_TOUCHSCREEN_TPS6507X is not set +# CONFIG_TOUCHSCREEN_ZET6223 is not set +# CONFIG_TOUCHSCREEN_ZFORCE is not set +# CONFIG_TOUCHSCREEN_ROHM_BU21023 is not set +CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set +# CONFIG_INPUT_BMA150 is not set +# CONFIG_INPUT_E3X0_BUTTON is not set +CONFIG_INPUT_PCSPKR=m +# CONFIG_INPUT_MMA8450 is not set +CONFIG_INPUT_APANEL=m +CONFIG_INPUT_GP2A=m +# CONFIG_INPUT_GPIO_BEEPER is not set +# CONFIG_INPUT_GPIO_DECODER is not set +CONFIG_INPUT_ATLAS_BTNS=m +CONFIG_INPUT_ATI_REMOTE2=m +CONFIG_INPUT_KEYSPAN_REMOTE=m +# CONFIG_INPUT_KXTJ9 is not set +CONFIG_INPUT_POWERMATE=m +CONFIG_INPUT_YEALINK=m +CONFIG_INPUT_CM109=m +CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF8574 is not set +# CONFIG_INPUT_PWM_BEEPER is not set +# CONFIG_INPUT_PWM_VIBRA is not set +CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +# CONFIG_INPUT_ADXL34X is not set +# CONFIG_INPUT_IMS_PCU is not set +# CONFIG_INPUT_CMA3000 is not set +CONFIG_INPUT_XEN_KBDDEV_FRONTEND=m +# CONFIG_INPUT_IDEAPAD_SLIDEBAR is not set +# CONFIG_INPUT_DRV260X_HAPTICS is not set +# CONFIG_INPUT_DRV2665_HAPTICS is not set +# CONFIG_INPUT_DRV2667_HAPTICS is not set +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +CONFIG_RMI4_SPI=m +CONFIG_RMI4_SMB=m +CONFIG_RMI4_F03=y +CONFIG_RMI4_F03_SERIO=m +CONFIG_RMI4_2D_SENSOR=y +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y +CONFIG_RMI4_F30=y +CONFIG_RMI4_F34=y +# CONFIG_RMI4_F54 is not set +CONFIG_RMI4_F55=y + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=y +CONFIG_SERIO_RAW=m +CONFIG_SERIO_ALTERA_PS2=m +# CONFIG_SERIO_PS2MULT is not set +CONFIG_SERIO_ARC_PS2=m +CONFIG_HYPERV_KEYBOARD=m +# CONFIG_SERIO_GPIO_PS2 is not set +# CONFIG_USERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_TTY=y +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_VT_CONSOLE_SLEEP=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_NONSTANDARD=y +# CONFIG_ROCKETPORT is not set +CONFIG_CYCLADES=m +# CONFIG_CYZ_INTR is not set +# CONFIG_MOXA_INTELLIO is not set +# CONFIG_MOXA_SMARTIO is not set +CONFIG_SYNCLINK=m +CONFIG_SYNCLINKMP=m +CONFIG_SYNCLINK_GT=m +CONFIG_NOZOMI=m +# CONFIG_ISI is not set +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +# CONFIG_TRACE_SINK is not set +CONFIG_LDISC_AUTOLOAD=y +CONFIG_DEVMEM=y +# CONFIG_DEVKMEM is not set + +# +# Serial drivers +# +CONFIG_SERIAL_EARLYCON=y +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set +CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_FINTEK is not set +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DMA=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=y +CONFIG_SERIAL_8250_NR_UARTS=32 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_8250_DW=y +# CONFIG_SERIAL_8250_RT288X is not set +CONFIG_SERIAL_8250_LPSS=y +CONFIG_SERIAL_8250_MID=y +# CONFIG_SERIAL_8250_MOXA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_KGDB_NMI is not set +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_CONSOLE_POLL=y +CONFIG_SERIAL_JSM=m +# CONFIG_SERIAL_SCCNXP is not set +# CONFIG_SERIAL_SC16IS7XX is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set +# CONFIG_SERIAL_IFX6X60 is not set +CONFIG_SERIAL_ARC=m +CONFIG_SERIAL_ARC_NR_PORTS=1 +# CONFIG_SERIAL_RP2 is not set +# CONFIG_SERIAL_FSL_LPUART is not set +# CONFIG_SERIAL_DEV_BUS is not set +CONFIG_PRINTER=m +# CONFIG_LP_CONSOLE is not set +CONFIG_PPDEV=m +CONFIG_HVC_DRIVER=y +CONFIG_HVC_IRQ=y +CONFIG_HVC_XEN=y +CONFIG_HVC_XEN_FRONTEND=y +CONFIG_VIRTIO_CONSOLE=m +CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PANIC_EVENT=y +CONFIG_IPMI_PANIC_STRING=y +CONFIG_IPMI_DEVICE_INTERFACE=m +CONFIG_IPMI_SI=m +CONFIG_IPMI_SSIF=m +CONFIG_IPMI_WATCHDOG=m +CONFIG_IPMI_POWEROFF=m +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_TIMERIOMEM=m +CONFIG_HW_RANDOM_INTEL=m +CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_VIA=m +CONFIG_HW_RANDOM_VIRTIO=y +CONFIG_NVRAM=y +# CONFIG_APPLICOM is not set +# CONFIG_MWAVE is not set +CONFIG_RAW_DRIVER=y +CONFIG_MAX_RAW_DEVS=8192 +CONFIG_HPET=y +CONFIG_HPET_MMAP=y +# CONFIG_HPET_MMAP_DEFAULT is not set +CONFIG_HANGCHECK_TIMER=m +CONFIG_UV_MMTIMER=m +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +CONFIG_TCG_TIS_CORE=y +CONFIG_TCG_TIS=y +# CONFIG_TCG_TIS_SPI is not set +CONFIG_TCG_TIS_I2C_ATMEL=m +CONFIG_TCG_TIS_I2C_INFINEON=m +CONFIG_TCG_TIS_I2C_NUVOTON=m +CONFIG_TCG_NSC=m +CONFIG_TCG_ATMEL=m +CONFIG_TCG_INFINEON=m +# CONFIG_TCG_XEN is not set +CONFIG_TCG_CRB=y +# CONFIG_TCG_VTPM_PROXY is not set +CONFIG_TCG_TIS_ST33ZP24=m +CONFIG_TCG_TIS_ST33ZP24_I2C=m +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set +CONFIG_TELCLOCK=m +CONFIG_DEVPORT=y +# CONFIG_XILLYBUS is not set +# CONFIG_RANDOM_TRUST_CPU is not set + +# +# I2C support +# +CONFIG_I2C=y +CONFIG_ACPI_I2C_OPREGION=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_MUX=m + +# +# Multiplexer I2C Chip support +# +# CONFIG_I2C_MUX_GPIO is not set +# CONFIG_I2C_MUX_LTC4306 is not set +# CONFIG_I2C_MUX_PCA9541 is not set +# CONFIG_I2C_MUX_PCA954x is not set +# CONFIG_I2C_MUX_REG is not set +CONFIG_I2C_MUX_MLXCPLD=m +CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_SMBUS=m +CONFIG_I2C_ALGOBIT=m +CONFIG_I2C_ALGOPCA=m + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +CONFIG_I2C_AMD756=m +CONFIG_I2C_AMD756_S4882=m +CONFIG_I2C_AMD8111=m +CONFIG_I2C_I801=m +CONFIG_I2C_ISCH=m +CONFIG_I2C_ISMT=m +CONFIG_I2C_PIIX4=m +CONFIG_I2C_NFORCE2=m +CONFIG_I2C_NFORCE2_S4985=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +CONFIG_I2C_SIS96X=m +CONFIG_I2C_VIA=m +CONFIG_I2C_VIAPRO=m + +# +# ACPI drivers +# +CONFIG_I2C_SCMI=m + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_CBUS_GPIO is not set +CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_PLATFORM=m +# CONFIG_I2C_DESIGNWARE_SLAVE is not set +# CONFIG_I2C_DESIGNWARE_PCI is not set +CONFIG_I2C_DESIGNWARE_BAYTRAIL=y +# CONFIG_I2C_EMEV2 is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_PCA_PLATFORM=m +CONFIG_I2C_SIMTEC=m +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +CONFIG_I2C_DIOLAN_U2C=m +CONFIG_I2C_PARPORT=m +CONFIG_I2C_PARPORT_LIGHT=m +# CONFIG_I2C_ROBOTFUZZ_OSIF is not set +# CONFIG_I2C_TAOS_EVM is not set +CONFIG_I2C_TINY_USB=m +CONFIG_I2C_VIPERBOARD=m + +# +# Other I2C/SMBus bus drivers +# +CONFIG_I2C_MLXCPLD=m +CONFIG_I2C_STUB=m +# CONFIG_I2C_SLAVE is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_OC_TINY is not set +# CONFIG_SPI_PXA2XX is not set +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +# CONFIG_SPMI is not set +# CONFIG_HSI is not set +CONFIG_PPS=y +# CONFIG_PPS_DEBUG is not set + +# +# PPS clients support +# +# CONFIG_PPS_CLIENT_KTIMER is not set +CONFIG_PPS_CLIENT_LDISC=m +CONFIG_PPS_CLIENT_PARPORT=m +CONFIG_PPS_CLIENT_GPIO=m + +# +# PPS generators support +# + +# +# PTP clock support +# +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +CONFIG_PTP_1588_CLOCK_KVM=m +CONFIG_PINCTRL=y +CONFIG_PINMUX=y +CONFIG_PINCONF=y +CONFIG_GENERIC_PINCONF=y +# CONFIG_DEBUG_PINCTRL is not set +CONFIG_PINCTRL_AMD=m +# CONFIG_PINCTRL_MCP23S08 is not set +# CONFIG_PINCTRL_SX150X is not set +CONFIG_PINCTRL_BAYTRAIL=y +# CONFIG_PINCTRL_CHERRYVIEW is not set +CONFIG_PINCTRL_INTEL=m +CONFIG_PINCTRL_BROXTON=m +CONFIG_PINCTRL_CANNONLAKE=m +CONFIG_PINCTRL_CEDARFORK=m +CONFIG_PINCTRL_DENVERTON=m +CONFIG_PINCTRL_GEMINILAKE=m +CONFIG_PINCTRL_ICELAKE=m +CONFIG_PINCTRL_LEWISBURG=m +CONFIG_PINCTRL_SUNRISEPOINT=m +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 +CONFIG_GPIO_ACPI=y +CONFIG_GPIOLIB_IRQCHIP=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GENERIC=m + +# +# Memory mapped GPIO drivers +# +CONFIG_GPIO_AMDPT=m +# CONFIG_GPIO_DWAPB is not set +# CONFIG_GPIO_EXAR is not set +# CONFIG_GPIO_GENERIC_PLATFORM is not set +CONFIG_GPIO_ICH=m +# CONFIG_GPIO_LYNXPOINT is not set +# CONFIG_GPIO_MB86S7X is not set +# CONFIG_GPIO_MOCKUP is not set +# CONFIG_GPIO_VX855 is not set + +# +# Port-mapped I/O GPIO drivers +# +# CONFIG_GPIO_F7188X is not set +# CONFIG_GPIO_IT87 is not set +# CONFIG_GPIO_SCH is not set +# CONFIG_GPIO_SCH311X is not set +# CONFIG_GPIO_WINBOND is not set +# CONFIG_GPIO_WS16C48 is not set + +# +# I2C GPIO expanders +# +# CONFIG_GPIO_ADP5588 is not set +# CONFIG_GPIO_MAX7300 is not set +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_TPIC2810 is not set + +# +# MFD GPIO expanders +# + +# +# PCI GPIO expanders +# +# CONFIG_GPIO_AMD8111 is not set +# CONFIG_GPIO_ML_IOH is not set +# CONFIG_GPIO_PCI_IDIO_16 is not set +# CONFIG_GPIO_PCIE_IDIO_24 is not set +# CONFIG_GPIO_RDC321X is not set + +# +# SPI GPIO expanders +# +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set + +# +# USB GPIO expanders +# +CONFIG_GPIO_VIPERBOARD=m +# CONFIG_W1 is not set +# CONFIG_POWER_AVS is not set +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_RESTART is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_GENERIC_ADC_BATTERY is not set +# CONFIG_TEST_POWER is not set +# CONFIG_CHARGER_ADP5061 is not set +# CONFIG_BATTERY_DS2780 is not set +# CONFIG_BATTERY_DS2781 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_SBS is not set +# CONFIG_CHARGER_SBS is not set +# CONFIG_MANAGER_SBS is not set +# CONFIG_BATTERY_BQ27XXX is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_BATTERY_MAX17042 is not set +# CONFIG_CHARGER_MAX8903 is not set +# CONFIG_CHARGER_LP8727 is not set +# CONFIG_CHARGER_GPIO is not set +# CONFIG_CHARGER_LTC3651 is not set +# CONFIG_CHARGER_BQ2415X is not set +# CONFIG_CHARGER_BQ24257 is not set +# CONFIG_CHARGER_BQ24735 is not set +# CONFIG_CHARGER_BQ25890 is not set +CONFIG_CHARGER_SMB347=m +# CONFIG_BATTERY_GAUGE_LTC2941 is not set +# CONFIG_CHARGER_RT9455 is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=m +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +CONFIG_SENSORS_ABITUGURU=m +CONFIG_SENSORS_ABITUGURU3=m +# CONFIG_SENSORS_AD7314 is not set +CONFIG_SENSORS_AD7414=m +CONFIG_SENSORS_AD7418=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_ADT7X10=m +# CONFIG_SENSORS_ADT7310 is not set +CONFIG_SENSORS_ADT7410=m +CONFIG_SENSORS_ADT7411=m +CONFIG_SENSORS_ADT7462=m +CONFIG_SENSORS_ADT7470=m +CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_K8TEMP=m +CONFIG_SENSORS_K10TEMP=m +CONFIG_SENSORS_FAM15H_POWER=m +CONFIG_SENSORS_APPLESMC=m +CONFIG_SENSORS_ASB100=m +# CONFIG_SENSORS_ASPEED is not set +CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_DS620=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_DELL_SMM=m +CONFIG_SENSORS_I5K_AMB=m +CONFIG_SENSORS_F71805F=m +CONFIG_SENSORS_F71882FG=m +CONFIG_SENSORS_F75375S=m +CONFIG_SENSORS_FSCHMD=m +# CONFIG_SENSORS_FTSTEUTATES is not set +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_G760A=m +# CONFIG_SENSORS_G762 is not set +# CONFIG_SENSORS_HIH6130 is not set +CONFIG_SENSORS_IBMAEM=m +CONFIG_SENSORS_IBMPEX=m +# CONFIG_SENSORS_IIO_HWMON is not set +CONFIG_SENSORS_I5500=m +CONFIG_SENSORS_CORETEMP=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_JC42=m +# CONFIG_SENSORS_POWR1220 is not set +CONFIG_SENSORS_LINEAGE=m +# CONFIG_SENSORS_LTC2945 is not set +# CONFIG_SENSORS_LTC2990 is not set +CONFIG_SENSORS_LTC4151=m +CONFIG_SENSORS_LTC4215=m +# CONFIG_SENSORS_LTC4222 is not set +CONFIG_SENSORS_LTC4245=m +# CONFIG_SENSORS_LTC4260 is not set +CONFIG_SENSORS_LTC4261=m +# CONFIG_SENSORS_MAX1111 is not set +CONFIG_SENSORS_MAX16065=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_MAX1668=m +CONFIG_SENSORS_MAX197=m +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX6621 is not set +CONFIG_SENSORS_MAX6639=m +CONFIG_SENSORS_MAX6642=m +CONFIG_SENSORS_MAX6650=m +CONFIG_SENSORS_MAX6697=m +# CONFIG_SENSORS_MAX31790 is not set +CONFIG_SENSORS_MCP3021=m +# CONFIG_SENSORS_MLXREG_FAN is not set +# CONFIG_SENSORS_TC654 is not set +# CONFIG_SENSORS_ADCXX is not set +CONFIG_SENSORS_LM63=m +# CONFIG_SENSORS_LM70 is not set +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_LM93=m +CONFIG_SENSORS_LM95234=m +CONFIG_SENSORS_LM95241=m +CONFIG_SENSORS_LM95245=m +CONFIG_SENSORS_PC87360=m +CONFIG_SENSORS_PC87427=m +CONFIG_SENSORS_NTC_THERMISTOR=m +# CONFIG_SENSORS_NCT6683 is not set +CONFIG_SENSORS_NCT6775=m +# CONFIG_SENSORS_NCT7802 is not set +# CONFIG_SENSORS_NCT7904 is not set +# CONFIG_SENSORS_NPCM7XX is not set +CONFIG_SENSORS_PCF8591=m +CONFIG_PMBUS=m +CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1275=m +# CONFIG_SENSORS_IBM_CFFPS is not set +# CONFIG_SENSORS_IR35221 is not set +CONFIG_SENSORS_LM25066=m +CONFIG_SENSORS_LTC2978=m +# CONFIG_SENSORS_LTC3815 is not set +CONFIG_SENSORS_MAX16064=m +# CONFIG_SENSORS_MAX20751 is not set +# CONFIG_SENSORS_MAX31785 is not set +CONFIG_SENSORS_MAX34440=m +CONFIG_SENSORS_MAX8688=m +# CONFIG_SENSORS_TPS40422 is not set +# CONFIG_SENSORS_TPS53679 is not set +CONFIG_SENSORS_UCD9000=m +CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SHT15=m +CONFIG_SENSORS_SHT21=m +# CONFIG_SENSORS_SHT3x is not set +# CONFIG_SENSORS_SHTC1 is not set +CONFIG_SENSORS_SIS5595=m +CONFIG_SENSORS_DME1737=m +CONFIG_SENSORS_EMC1403=m +# CONFIG_SENSORS_EMC2103 is not set +CONFIG_SENSORS_EMC6W201=m +CONFIG_SENSORS_SMSC47M1=m +CONFIG_SENSORS_SMSC47M192=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_SCH56XX_COMMON=m +CONFIG_SENSORS_SCH5627=m +CONFIG_SENSORS_SCH5636=m +# CONFIG_SENSORS_STTS751 is not set +# CONFIG_SENSORS_SMM665 is not set +# CONFIG_SENSORS_ADC128D818 is not set +CONFIG_SENSORS_ADS1015=m +CONFIG_SENSORS_ADS7828=m +# CONFIG_SENSORS_ADS7871 is not set +CONFIG_SENSORS_AMC6821=m +CONFIG_SENSORS_INA209=m +CONFIG_SENSORS_INA2XX=m +# CONFIG_SENSORS_INA3221 is not set +# CONFIG_SENSORS_TC74 is not set +CONFIG_SENSORS_THMC50=m +CONFIG_SENSORS_TMP102=m +# CONFIG_SENSORS_TMP103 is not set +# CONFIG_SENSORS_TMP108 is not set +CONFIG_SENSORS_TMP401=m +CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_VIA_CPUTEMP=m +CONFIG_SENSORS_VIA686A=m +CONFIG_SENSORS_VT1211=m +CONFIG_SENSORS_VT8231=m +# CONFIG_SENSORS_W83773G is not set +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83795=m +# CONFIG_SENSORS_W83795_FANCTRL is not set +CONFIG_SENSORS_W83L785TS=m +CONFIG_SENSORS_W83L786NG=m +CONFIG_SENSORS_W83627HF=m +CONFIG_SENSORS_W83627EHF=m +# CONFIG_SENSORS_XGENE is not set + +# +# ACPI drivers +# +CONFIG_SENSORS_ACPI_POWER=m +CONFIG_SENSORS_ATK0110=m +CONFIG_THERMAL=y +# CONFIG_THERMAL_STATISTICS is not set +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_WRITABLE_TRIPS=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set +# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set +# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set +CONFIG_THERMAL_GOV_FAIR_SHARE=y +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_GOV_BANG_BANG=y +CONFIG_THERMAL_GOV_USER_SPACE=y +# CONFIG_THERMAL_GOV_POWER_ALLOCATOR is not set +# CONFIG_THERMAL_EMULATION is not set +CONFIG_INTEL_POWERCLAMP=m +CONFIG_X86_PKG_TEMP_THERMAL=m +CONFIG_INTEL_SOC_DTS_IOSF_CORE=m +# CONFIG_INTEL_SOC_DTS_THERMAL is not set + +# +# ACPI INT340X thermal drivers +# +CONFIG_INT340X_THERMAL=m +CONFIG_ACPI_THERMAL_REL=m +# CONFIG_INT3406_THERMAL is not set +CONFIG_INTEL_PCH_THERMAL=m +# CONFIG_GENERIC_ADC_THERMAL is not set +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_SYSFS=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +CONFIG_WDAT_WDT=m +# CONFIG_XILINX_WATCHDOG is not set +# CONFIG_ZIIRAVE_WATCHDOG is not set +# CONFIG_CADENCE_WATCHDOG is not set +# CONFIG_DW_WATCHDOG is not set +# CONFIG_MAX63XX_WATCHDOG is not set +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +CONFIG_ALIM1535_WDT=m +CONFIG_ALIM7101_WDT=m +# CONFIG_EBC_C384_WDT is not set +CONFIG_F71808E_WDT=m +CONFIG_SP5100_TCO=m +CONFIG_SBC_FITPC2_WATCHDOG=m +# CONFIG_EUROTECH_WDT is not set +CONFIG_IB700_WDT=m +CONFIG_IBMASR=m +# CONFIG_WAFER_WDT is not set +CONFIG_I6300ESB_WDT=m +CONFIG_IE6XX_WDT=m +CONFIG_ITCO_WDT=m +CONFIG_ITCO_VENDOR_SUPPORT=y +CONFIG_IT8712F_WDT=m +CONFIG_IT87_WDT=m +CONFIG_HP_WATCHDOG=m +CONFIG_HPWDT_NMI_DECODING=y +# CONFIG_SC1200_WDT is not set +# CONFIG_PC87413_WDT is not set +CONFIG_NV_TCO=m +# CONFIG_60XX_WDT is not set +# CONFIG_CPU5_WDT is not set +CONFIG_SMSC_SCH311X_WDT=m +# CONFIG_SMSC37B787_WDT is not set +CONFIG_VIA_WDT=m +CONFIG_W83627HF_WDT=m +CONFIG_W83877F_WDT=m +CONFIG_W83977F_WDT=m +CONFIG_MACHZ_WDT=m +# CONFIG_SBC_EPX_C3_WATCHDOG is not set +CONFIG_INTEL_MEI_WDT=m +# CONFIG_NI903X_WDT is not set +# CONFIG_NIC7018_WDT is not set +# CONFIG_MEN_A21_WDT is not set +CONFIG_XEN_WDT=m + +# +# PCI-based Watchdog Cards +# +CONFIG_PCIPCWATCHDOG=m +CONFIG_WDTPCI=m + +# +# USB-based Watchdog Cards +# +CONFIG_USBPCWATCHDOG=m + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set +CONFIG_BCMA_POSSIBLE=y +CONFIG_BCMA=m +CONFIG_BCMA_HOST_PCI_POSSIBLE=y +CONFIG_BCMA_HOST_PCI=y +# CONFIG_BCMA_HOST_SOC is not set +CONFIG_BCMA_DRIVER_PCI=y +CONFIG_BCMA_DRIVER_GMAC_CMN=y +CONFIG_BCMA_DRIVER_GPIO=y +# CONFIG_BCMA_DEBUG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_CORE=y +# CONFIG_MFD_AS3711 is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_AAT2870_CORE is not set +# CONFIG_MFD_BCM590XX is not set +# CONFIG_MFD_BD9571MWV is not set +# CONFIG_MFD_AXP20X_I2C is not set +# CONFIG_MFD_CROS_EC is not set +# CONFIG_MFD_MADERA is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9052_I2C is not set +# CONFIG_MFD_DA9055 is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set +# CONFIG_MFD_DLN2 is not set +# CONFIG_MFD_MC13XXX_SPI is not set +# CONFIG_MFD_MC13XXX_I2C is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set +CONFIG_LPC_ICH=m +CONFIG_LPC_SCH=m +# CONFIG_INTEL_SOC_PMIC_CHTDC_TI is not set +CONFIG_MFD_INTEL_LPSS=y +CONFIG_MFD_INTEL_LPSS_ACPI=y +CONFIG_MFD_INTEL_LPSS_PCI=y +# CONFIG_MFD_JANZ_CMODIO is not set +# CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_88PM860X is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX77843 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_MAX8997 is not set +# CONFIG_MFD_MAX8998 is not set +# CONFIG_MFD_MT6397 is not set +# CONFIG_MFD_MENF21BMC is not set +# CONFIG_EZX_PCAP is not set +CONFIG_MFD_VIPERBOARD=m +# CONFIG_MFD_RETU is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_RDC321X is not set +# CONFIG_MFD_RT5033 is not set +# CONFIG_MFD_RC5T583 is not set +# CONFIG_MFD_SEC_CORE is not set +# CONFIG_MFD_SI476X_CORE is not set +CONFIG_MFD_SM501=m +CONFIG_MFD_SM501_GPIO=y +# CONFIG_MFD_SKY81452 is not set +# CONFIG_MFD_SMSC is not set +# CONFIG_ABX500_CORE is not set +# CONFIG_MFD_SYSCON is not set +# CONFIG_MFD_TI_AM335X_TSCADC is not set +# CONFIG_MFD_LP3943 is not set +# CONFIG_MFD_LP8788 is not set +# CONFIG_MFD_TI_LMU is not set +# CONFIG_MFD_PALMAS is not set +# CONFIG_TPS6105X is not set +# CONFIG_TPS65010 is not set +# CONFIG_TPS6507X is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TPS65090 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS6586X is not set +# CONFIG_MFD_TPS65910 is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set +# CONFIG_MFD_TPS80031 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_TWL6040_CORE is not set +# CONFIG_MFD_WL1273_CORE is not set +# CONFIG_MFD_LM3533 is not set +CONFIG_MFD_VX855=m +# CONFIG_MFD_ARIZONA_I2C is not set +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X_I2C is not set +# CONFIG_MFD_WM831X_SPI is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_REGULATOR is not set +CONFIG_CEC_CORE=y +CONFIG_RC_CORE=m +CONFIG_RC_MAP=m +CONFIG_LIRC=y +CONFIG_RC_DECODERS=y +CONFIG_IR_NEC_DECODER=m +CONFIG_IR_RC5_DECODER=m +CONFIG_IR_RC6_DECODER=m +CONFIG_IR_JVC_DECODER=m +CONFIG_IR_SONY_DECODER=m +CONFIG_IR_SANYO_DECODER=m +# CONFIG_IR_SHARP_DECODER is not set +CONFIG_IR_MCE_KBD_DECODER=m +# CONFIG_IR_XMP_DECODER is not set +CONFIG_IR_IMON_DECODER=m +CONFIG_RC_DEVICES=y +CONFIG_RC_ATI_REMOTE=m +CONFIG_IR_ENE=m +CONFIG_IR_IMON=m +CONFIG_IR_IMON_RAW=m +CONFIG_IR_MCEUSB=m +CONFIG_IR_ITE_CIR=m +CONFIG_IR_FINTEK=m +CONFIG_IR_NUVOTON=m +CONFIG_IR_REDRAT3=m +CONFIG_IR_STREAMZAP=m +CONFIG_IR_WINBOND_CIR=m +# CONFIG_IR_IGORPLUGUSB is not set +CONFIG_IR_IGUANA=m +CONFIG_IR_TTUSBIR=m +# CONFIG_RC_LOOPBACK is not set +CONFIG_IR_SERIAL=m +CONFIG_IR_SERIAL_TRANSMITTER=y +CONFIG_IR_SIR=m +CONFIG_MEDIA_SUPPORT=m + +# +# Multimedia core support +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +# CONFIG_MEDIA_SDR_SUPPORT is not set +CONFIG_MEDIA_CEC_SUPPORT=y +# CONFIG_MEDIA_CONTROLLER is not set +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2=m +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +CONFIG_DVB_CORE=m +# CONFIG_DVB_MMAP is not set +CONFIG_DVB_NET=y +CONFIG_TTPCI_EEPROM=m +CONFIG_DVB_MAX_ADAPTERS=8 +CONFIG_DVB_DYNAMIC_MINORS=y +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set + +# +# Media drivers +# +CONFIG_MEDIA_USB_SUPPORT=y + +# +# Webcam devices +# +CONFIG_USB_VIDEO_CLASS=m +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m +CONFIG_USB_GL860=m +CONFIG_USB_GSPCA_BENQ=m +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_CPIA1=m +# CONFIG_USB_GSPCA_DTCS033 is not set +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m +CONFIG_USB_GSPCA_JEILINJ=m +CONFIG_USB_GSPCA_JL2005BCD=m +# CONFIG_USB_GSPCA_KINECT is not set +CONFIG_USB_GSPCA_KONICA=m +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_NW80X=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_OV534_9=m +CONFIG_USB_GSPCA_PAC207=m +CONFIG_USB_GSPCA_PAC7302=m +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SE401=m +CONFIG_USB_GSPCA_SN9C2028=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SPCA1528=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_SQ930X=m +CONFIG_USB_GSPCA_STK014=m +# CONFIG_USB_GSPCA_STK1135 is not set +CONFIG_USB_GSPCA_STV0680=m +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TOPRO=m +# CONFIG_USB_GSPCA_TOUPTEK is not set +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_VICAM=m +CONFIG_USB_GSPCA_XIRLINK_CIT=m +CONFIG_USB_GSPCA_ZC3XX=m +CONFIG_USB_PWC=m +# CONFIG_USB_PWC_DEBUG is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_VIDEO_CPIA2 is not set +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m +# CONFIG_VIDEO_USBTV is not set + +# +# Analog TV USB devices +# +CONFIG_VIDEO_PVRUSB2=m +CONFIG_VIDEO_PVRUSB2_SYSFS=y +CONFIG_VIDEO_PVRUSB2_DVB=y +# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set +CONFIG_VIDEO_HDPVR=m +CONFIG_VIDEO_USBVISION=m +# CONFIG_VIDEO_STK1160_COMMON is not set +# CONFIG_VIDEO_GO7007 is not set + +# +# Analog/digital TV USB devices +# +CONFIG_VIDEO_AU0828=m +CONFIG_VIDEO_AU0828_V4L2=y +# CONFIG_VIDEO_AU0828_RC is not set +CONFIG_VIDEO_CX231XX=m +CONFIG_VIDEO_CX231XX_RC=y +CONFIG_VIDEO_CX231XX_ALSA=m +CONFIG_VIDEO_CX231XX_DVB=m +CONFIG_VIDEO_TM6000=m +CONFIG_VIDEO_TM6000_ALSA=m +CONFIG_VIDEO_TM6000_DVB=m + +# +# Digital TV USB devices +# +CONFIG_DVB_USB=m +# CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_DIB3000MC=m +CONFIG_DVB_USB_A800=m +CONFIG_DVB_USB_DIBUSB_MB=m +# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set +CONFIG_DVB_USB_DIBUSB_MC=m +CONFIG_DVB_USB_DIB0700=m +CONFIG_DVB_USB_UMT_010=m +CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_M920X=m +CONFIG_DVB_USB_DIGITV=m +CONFIG_DVB_USB_VP7045=m +CONFIG_DVB_USB_VP702X=m +CONFIG_DVB_USB_GP8PSK=m +CONFIG_DVB_USB_NOVA_T_USB2=m +CONFIG_DVB_USB_TTUSB2=m +CONFIG_DVB_USB_DTT200U=m +CONFIG_DVB_USB_OPERA1=m +CONFIG_DVB_USB_AF9005=m +CONFIG_DVB_USB_AF9005_REMOTE=m +CONFIG_DVB_USB_PCTV452E=m +CONFIG_DVB_USB_DW2102=m +CONFIG_DVB_USB_CINERGY_T2=m +CONFIG_DVB_USB_DTV5100=m +CONFIG_DVB_USB_AZ6027=m +CONFIG_DVB_USB_TECHNISAT_USB2=m +CONFIG_DVB_USB_V2=m +CONFIG_DVB_USB_AF9015=m +CONFIG_DVB_USB_AF9035=m +CONFIG_DVB_USB_ANYSEE=m +CONFIG_DVB_USB_AU6610=m +CONFIG_DVB_USB_AZ6007=m +CONFIG_DVB_USB_CE6230=m +CONFIG_DVB_USB_EC168=m +CONFIG_DVB_USB_GL861=m +CONFIG_DVB_USB_LME2510=m +CONFIG_DVB_USB_MXL111SF=m +CONFIG_DVB_USB_RTL28XXU=m +# CONFIG_DVB_USB_DVBSKY is not set +# CONFIG_DVB_USB_ZD1301 is not set +CONFIG_DVB_TTUSB_BUDGET=m +CONFIG_DVB_TTUSB_DEC=m +CONFIG_SMS_USB_DRV=m +CONFIG_DVB_B2C2_FLEXCOP_USB=m +# CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG is not set +# CONFIG_DVB_AS102 is not set + +# +# Webcam, TV (analog/digital) USB devices +# +CONFIG_VIDEO_EM28XX=m +# CONFIG_VIDEO_EM28XX_V4L2 is not set +CONFIG_VIDEO_EM28XX_ALSA=m +CONFIG_VIDEO_EM28XX_DVB=m +CONFIG_VIDEO_EM28XX_RC=m + +# +# USB HDMI CEC adapters +# +CONFIG_USB_PULSE8_CEC=m +CONFIG_USB_RAINSHADOW_CEC=m +CONFIG_MEDIA_PCI_SUPPORT=y + +# +# Media capture support +# +# CONFIG_VIDEO_MEYE is not set +# CONFIG_VIDEO_SOLO6X10 is not set +# CONFIG_VIDEO_TW5864 is not set +# CONFIG_VIDEO_TW68 is not set +# CONFIG_VIDEO_TW686X is not set + +# +# Media capture/analog TV support +# +CONFIG_VIDEO_IVTV=m +# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set +# CONFIG_VIDEO_IVTV_ALSA is not set +CONFIG_VIDEO_FB_IVTV=m +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DT3155 is not set + +# +# Media capture/analog/hybrid TV support +# +CONFIG_VIDEO_CX18=m +CONFIG_VIDEO_CX18_ALSA=m +CONFIG_VIDEO_CX23885=m +CONFIG_MEDIA_ALTERA_CI=m +# CONFIG_VIDEO_CX25821 is not set +CONFIG_VIDEO_CX88=m +CONFIG_VIDEO_CX88_ALSA=m +CONFIG_VIDEO_CX88_BLACKBIRD=m +CONFIG_VIDEO_CX88_DVB=m +# CONFIG_VIDEO_CX88_ENABLE_VP3054 is not set +CONFIG_VIDEO_CX88_MPEG=m +CONFIG_VIDEO_BT848=m +CONFIG_DVB_BT8XX=m +CONFIG_VIDEO_SAA7134=m +CONFIG_VIDEO_SAA7134_ALSA=m +CONFIG_VIDEO_SAA7134_RC=y +CONFIG_VIDEO_SAA7134_DVB=m +CONFIG_VIDEO_SAA7164=m + +# +# Media digital TV PCI Adapters +# +CONFIG_DVB_AV7110_IR=y +CONFIG_DVB_AV7110=m +CONFIG_DVB_AV7110_OSD=y +CONFIG_DVB_BUDGET_CORE=m +CONFIG_DVB_BUDGET=m +CONFIG_DVB_BUDGET_CI=m +CONFIG_DVB_BUDGET_AV=m +CONFIG_DVB_BUDGET_PATCH=m +CONFIG_DVB_B2C2_FLEXCOP_PCI=m +# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set +CONFIG_DVB_PLUTO2=m +CONFIG_DVB_DM1105=m +CONFIG_DVB_PT1=m +# CONFIG_DVB_PT3 is not set +CONFIG_MANTIS_CORE=m +CONFIG_DVB_MANTIS=m +CONFIG_DVB_HOPPER=m +CONFIG_DVB_NGENE=m +CONFIG_DVB_DDBRIDGE=m +# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set +# CONFIG_DVB_SMIPCIE is not set +# CONFIG_DVB_NETUP_UNIDVB is not set +# CONFIG_V4L_PLATFORM_DRIVERS is not set +# CONFIG_V4L_MEM2MEM_DRIVERS is not set +# CONFIG_V4L_TEST_DRIVERS is not set +# CONFIG_DVB_PLATFORM_DRIVERS is not set +CONFIG_CEC_PLATFORM_DRIVERS=y + +# +# Supported MMC/SDIO adapters +# +CONFIG_SMS_SDIO_DRV=m +CONFIG_RADIO_ADAPTERS=y +CONFIG_RADIO_TEA575X=m +# CONFIG_RADIO_SI470X is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_MR800 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_SHARK is not set +# CONFIG_RADIO_SHARK2 is not set +# CONFIG_USB_KEENE is not set +# CONFIG_USB_RAREMONO is not set +# CONFIG_USB_MA901 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_SAA7706H is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_WL1273 is not set + +# +# Texas Instruments WL128x FM driver (ST based) +# + +# +# Supported FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_INPUT=y +CONFIG_MEDIA_COMMON_OPTIONS=y + +# +# common driver options +# +CONFIG_VIDEO_CX2341X=m +CONFIG_VIDEO_TVEEPROM=m +CONFIG_CYPRESS_FIRMWARE=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m +CONFIG_DVB_B2C2_FLEXCOP=m +CONFIG_VIDEO_SAA7146=m +CONFIG_VIDEO_SAA7146_VV=m +CONFIG_SMS_SIANO_MDTV=m +CONFIG_SMS_SIANO_RC=y +# CONFIG_SMS_SIANO_DEBUGFS is not set + +# +# Media ancillary drivers (tuners, sensors, i2c, spi, frontends) +# +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y +CONFIG_MEDIA_ATTACH=y +CONFIG_VIDEO_IR_I2C=m + +# +# Audio decoders, processors and mixers +# +CONFIG_VIDEO_TVAUDIO=m +CONFIG_VIDEO_TDA7432=m +CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS3308=m +CONFIG_VIDEO_CS5345=m +CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_WM8775=m +CONFIG_VIDEO_WM8739=m +CONFIG_VIDEO_VP27SMPX=m + +# +# RDS decoders +# +CONFIG_VIDEO_SAA6588=m + +# +# Video decoders +# +CONFIG_VIDEO_SAA711X=m + +# +# Video and audio decoders +# +CONFIG_VIDEO_SAA717X=m +CONFIG_VIDEO_CX25840=m + +# +# Video encoders +# +CONFIG_VIDEO_SAA7127=m + +# +# Camera sensor devices +# + +# +# Flash devices +# + +# +# Video improvement chips +# +CONFIG_VIDEO_UPD64031A=m +CONFIG_VIDEO_UPD64083=m + +# +# Audio/Video compression chips +# +CONFIG_VIDEO_SAA6752HS=m + +# +# SDR tuner chips +# + +# +# Miscellaneous helper chips +# +CONFIG_VIDEO_M52790=m + +# +# Sensors used on soc_camera driver +# + +# +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +CONFIG_MEDIA_TUNER=m +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA18250=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA827X=m +CONFIG_MEDIA_TUNER_TDA18271=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_MT2060=m +CONFIG_MEDIA_TUNER_MT2063=m +CONFIG_MEDIA_TUNER_MT2266=m +CONFIG_MEDIA_TUNER_MT2131=m +CONFIG_MEDIA_TUNER_QT1010=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_MEDIA_TUNER_XC4000=m +CONFIG_MEDIA_TUNER_MXL5005S=m +CONFIG_MEDIA_TUNER_MXL5007T=m +CONFIG_MEDIA_TUNER_MC44S803=m +CONFIG_MEDIA_TUNER_MAX2165=m +CONFIG_MEDIA_TUNER_TDA18218=m +CONFIG_MEDIA_TUNER_FC0011=m +CONFIG_MEDIA_TUNER_FC0012=m +CONFIG_MEDIA_TUNER_FC0013=m +CONFIG_MEDIA_TUNER_TDA18212=m +CONFIG_MEDIA_TUNER_E4000=m +CONFIG_MEDIA_TUNER_FC2580=m +CONFIG_MEDIA_TUNER_M88RS6000T=m +CONFIG_MEDIA_TUNER_TUA9001=m +CONFIG_MEDIA_TUNER_SI2157=m +CONFIG_MEDIA_TUNER_IT913X=m +CONFIG_MEDIA_TUNER_R820T=m +CONFIG_MEDIA_TUNER_QM1D1C0042=m +CONFIG_MEDIA_TUNER_QM1D1B0004=m + +# +# Multistandard (satellite) frontends +# +CONFIG_DVB_STB0899=m +CONFIG_DVB_STB6100=m +CONFIG_DVB_STV090x=m +CONFIG_DVB_STV0910=m +CONFIG_DVB_STV6110x=m +CONFIG_DVB_STV6111=m +CONFIG_DVB_MXL5XX=m +CONFIG_DVB_M88DS3103=m + +# +# Multistandard (cable + terrestrial) frontends +# +CONFIG_DVB_DRXK=m +CONFIG_DVB_TDA18271C2DD=m +CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m + +# +# DVB-S (satellite) frontends +# +CONFIG_DVB_CX24110=m +CONFIG_DVB_CX24123=m +CONFIG_DVB_MT312=m +CONFIG_DVB_ZL10036=m +CONFIG_DVB_ZL10039=m +CONFIG_DVB_S5H1420=m +CONFIG_DVB_STV0288=m +CONFIG_DVB_STB6000=m +CONFIG_DVB_STV0299=m +CONFIG_DVB_STV6110=m +CONFIG_DVB_STV0900=m +CONFIG_DVB_TDA8083=m +CONFIG_DVB_TDA10086=m +CONFIG_DVB_TDA8261=m +CONFIG_DVB_VES1X93=m +CONFIG_DVB_TUNER_ITD1000=m +CONFIG_DVB_TUNER_CX24113=m +CONFIG_DVB_TDA826X=m +CONFIG_DVB_TUA6100=m +CONFIG_DVB_CX24116=m +CONFIG_DVB_CX24117=m +CONFIG_DVB_CX24120=m +CONFIG_DVB_SI21XX=m +CONFIG_DVB_TS2020=m +CONFIG_DVB_DS3000=m +CONFIG_DVB_MB86A16=m +CONFIG_DVB_TDA10071=m + +# +# DVB-T (terrestrial) frontends +# +CONFIG_DVB_SP8870=m +CONFIG_DVB_SP887X=m +CONFIG_DVB_CX22700=m +CONFIG_DVB_CX22702=m +CONFIG_DVB_DRXD=m +CONFIG_DVB_L64781=m +CONFIG_DVB_TDA1004X=m +CONFIG_DVB_NXT6000=m +CONFIG_DVB_MT352=m +CONFIG_DVB_ZL10353=m +CONFIG_DVB_DIB3000MB=m +CONFIG_DVB_DIB3000MC=m +CONFIG_DVB_DIB7000M=m +CONFIG_DVB_DIB7000P=m +CONFIG_DVB_TDA10048=m +CONFIG_DVB_AF9013=m +CONFIG_DVB_EC100=m +CONFIG_DVB_STV0367=m +CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m +CONFIG_DVB_RTL2830=m +CONFIG_DVB_RTL2832=m +CONFIG_DVB_SI2168=m +CONFIG_DVB_GP8PSK_FE=m + +# +# DVB-C (cable) frontends +# +CONFIG_DVB_VES1820=m +CONFIG_DVB_TDA10021=m +CONFIG_DVB_TDA10023=m +CONFIG_DVB_STV0297=m + +# +# ATSC (North American/Korean Terrestrial/Cable DTV) frontends +# +CONFIG_DVB_NXT200X=m +CONFIG_DVB_OR51211=m +CONFIG_DVB_OR51132=m +CONFIG_DVB_BCM3510=m +CONFIG_DVB_LGDT330X=m +CONFIG_DVB_LGDT3305=m +CONFIG_DVB_LGDT3306A=m +CONFIG_DVB_LG2160=m +CONFIG_DVB_S5H1409=m +CONFIG_DVB_AU8522=m +CONFIG_DVB_AU8522_DTV=m +CONFIG_DVB_AU8522_V4L=m +CONFIG_DVB_S5H1411=m + +# +# ISDB-T (terrestrial) frontends +# +CONFIG_DVB_S921=m +CONFIG_DVB_DIB8000=m +CONFIG_DVB_MB86A20S=m + +# +# ISDB-S (satellite) & ISDB-T (terrestrial) frontends +# +CONFIG_DVB_TC90522=m + +# +# Digital terrestrial only tuners/PLL +# +CONFIG_DVB_PLL=m +CONFIG_DVB_TUNER_DIB0070=m +CONFIG_DVB_TUNER_DIB0090=m + +# +# SEC control devices for DVB-S +# +CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBP21=m +CONFIG_DVB_LNBP22=m +CONFIG_DVB_ISL6405=m +CONFIG_DVB_ISL6421=m +CONFIG_DVB_ISL6423=m +CONFIG_DVB_A8293=m +CONFIG_DVB_LGS8GXX=m +CONFIG_DVB_ATBM8830=m +CONFIG_DVB_TDA665x=m +CONFIG_DVB_IX2505V=m +CONFIG_DVB_M88RS2000=m +CONFIG_DVB_AF9033=m + +# +# Common Interface (EN50221) controller drivers +# +CONFIG_DVB_CXD2099=m + +# +# Tools to develop new frontends +# +CONFIG_DVB_DUMMY_FE=m + +# +# Graphics support +# +# CONFIG_AGP is not set +CONFIG_INTEL_GTT=m +CONFIG_VGA_ARB=y +CONFIG_VGA_ARB_MAX_GPUS=64 +CONFIG_VGA_SWITCHEROO=y +CONFIG_DRM=m +CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_DP_AUX_CHARDEV=y +# CONFIG_DRM_DEBUG_SELFTEST is not set +CONFIG_DRM_KMS_HELPER=m +CONFIG_DRM_KMS_FB_HELPER=y +CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +CONFIG_DRM_LOAD_EDID_FIRMWARE=y +CONFIG_DRM_DP_CEC=y +CONFIG_DRM_TTM=m +CONFIG_DRM_VM=y +CONFIG_DRM_SCHED=m + +# +# I2C encoder or helper chips +# +CONFIG_DRM_I2C_CH7006=m +CONFIG_DRM_I2C_SIL164=m +# CONFIG_DRM_I2C_NXP_TDA998X is not set +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +CONFIG_DRM_RADEON=m +CONFIG_DRM_RADEON_USERPTR=y +CONFIG_DRM_AMDGPU=m +# CONFIG_DRM_AMDGPU_SI is not set +# CONFIG_DRM_AMDGPU_CIK is not set +# CONFIG_DRM_AMDGPU_USERPTR is not set +# CONFIG_DRM_AMDGPU_GART_DEBUGFS is not set + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_AMD_ACP=y + +# +# Display Engine Configuration +# +CONFIG_DRM_AMD_DC=y +CONFIG_DRM_AMD_DC_DCN1_0=y +# CONFIG_DEBUG_KERNEL_DC is not set + +# +# AMD Library routines +# +CONFIG_CHASH=m +# CONFIG_CHASH_STATS is not set +# CONFIG_CHASH_SELFTEST is not set +CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y +CONFIG_NOUVEAU_DEBUG=5 +CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +# CONFIG_NOUVEAU_DEBUG_MMU is not set +CONFIG_DRM_NOUVEAU_BACKLIGHT=y +CONFIG_DRM_I915=m +# CONFIG_DRM_I915_ALPHA_SUPPORT is not set +CONFIG_DRM_I915_CAPTURE_ERROR=y +CONFIG_DRM_I915_COMPRESS_ERROR=y +CONFIG_DRM_I915_USERPTR=y +CONFIG_DRM_I915_GVT=y +CONFIG_DRM_I915_GVT_KVMGT=m +# CONFIG_DRM_VGEM is not set +CONFIG_DRM_VKMS=m +CONFIG_DRM_VMWGFX=m +CONFIG_DRM_VMWGFX_FBCON=y +CONFIG_DRM_GMA500=m +CONFIG_DRM_GMA600=y +CONFIG_DRM_GMA3600=y +CONFIG_DRM_UDL=m +CONFIG_DRM_AST=m +CONFIG_DRM_MGAG200=m +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_QXL=m +CONFIG_DRM_BOCHS=m +CONFIG_DRM_VIRTIO_GPU=m +CONFIG_DRM_PANEL=y + +# +# Display Panels +# +# CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN is not set +CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y + +# +# Display Interface Bridges +# +# CONFIG_DRM_ANALOGIX_ANX78XX is not set +CONFIG_HSA_AMD=m +# CONFIG_DRM_HISI_HIBMC is not set +# CONFIG_DRM_TINYDRM is not set +# CONFIG_DRM_XEN is not set +# CONFIG_DRM_LEGACY is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y + +# +# Frame buffer Devices +# +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +CONFIG_FB_BOOT_VESA_SUPPORT=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y +CONFIG_FB_BACKLIGHT=y +# CONFIG_FB_MODE_HELPERS is not set +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ARC is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_UVESA is not set +CONFIG_FB_VESA=y +CONFIG_FB_EFI=y +# CONFIG_FB_N411 is not set +# CONFIG_FB_HGA is not set +# CONFIG_FB_OPENCORES is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_I740 is not set +# CONFIG_FB_LE80578 is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_SM501 is not set +# CONFIG_FB_SMSCUFX is not set +# CONFIG_FB_UDL is not set +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_XEN_FBDEV_FRONTEND is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_FB_HYPERV=m +# CONFIG_FB_SIMPLE is not set +# CONFIG_FB_SM712 is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +CONFIG_LCD_PLATFORM=m +# CONFIG_LCD_S6E63M0 is not set +# CONFIG_LCD_LD9040 is not set +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_OTM3225A is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +# CONFIG_BACKLIGHT_PWM is not set +CONFIG_BACKLIGHT_APPLE=m +# CONFIG_BACKLIGHT_PM8941_WLED is not set +# CONFIG_BACKLIGHT_SAHARA is not set +# CONFIG_BACKLIGHT_ADP8860 is not set +# CONFIG_BACKLIGHT_ADP8870 is not set +# CONFIG_BACKLIGHT_LM3630A is not set +# CONFIG_BACKLIGHT_LM3639 is not set +CONFIG_BACKLIGHT_LP855X=m +# CONFIG_BACKLIGHT_GPIO is not set +# CONFIG_BACKLIGHT_LV5207LP is not set +# CONFIG_BACKLIGHT_BD6107 is not set +# CONFIG_BACKLIGHT_ARCXCNN is not set +CONFIG_HDMI=y + +# +# Console display driver support +# +CONFIG_VGA_CONSOLE=y +CONFIG_VGACON_SOFT_SCROLLBACK=y +CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 +# CONFIG_VGACON_SOFT_SCROLLBACK_PERSISTENT_ENABLE_BY_DEFAULT is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_DUMMY_CONSOLE_COLUMNS=80 +CONFIG_DUMMY_CONSOLE_ROWS=25 +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_PCM_ELD=y +CONFIG_SND_HWDEP=m +CONFIG_SND_SEQ_DEVICE=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=m +CONFIG_SND_JACK=y +CONFIG_SND_JACK_INPUT_DEV=y +CONFIG_SND_OSSEMUL=y +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_PCM_TIMER=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_DYNAMIC_MINORS=y +CONFIG_SND_MAX_CARDS=32 +# CONFIG_SND_SUPPORT_OLD_API is not set +CONFIG_SND_PROC_FS=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +CONFIG_SND_DMA_SGBUF=y +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_SEQUENCER_OSS=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_SEQ_MIDI_EVENT=m +CONFIG_SND_SEQ_MIDI=m +CONFIG_SND_SEQ_MIDI_EMUL=m +CONFIG_SND_SEQ_VIRMIDI=m +CONFIG_SND_MPU401_UART=m +CONFIG_SND_OPL3_LIB=m +CONFIG_SND_OPL3_LIB_SEQ=m +CONFIG_SND_VX_LIB=m +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_DRIVERS=y +CONFIG_SND_PCSP=m +CONFIG_SND_DUMMY=m +CONFIG_SND_ALOOP=m +CONFIG_SND_VIRMIDI=m +CONFIG_SND_MTPAV=m +# CONFIG_SND_MTS64 is not set +# CONFIG_SND_SERIAL_U16550 is not set +CONFIG_SND_MPU401=m +# CONFIG_SND_PORTMAN2X4 is not set +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=5 +CONFIG_SND_PCI=y +CONFIG_SND_AD1889=m +# CONFIG_SND_ALS300 is not set +# CONFIG_SND_ALS4000 is not set +CONFIG_SND_ALI5451=m +CONFIG_SND_ASIHPI=m +CONFIG_SND_ATIIXP=m +CONFIG_SND_ATIIXP_MODEM=m +CONFIG_SND_AU8810=m +CONFIG_SND_AU8820=m +CONFIG_SND_AU8830=m +# CONFIG_SND_AW2 is not set +# CONFIG_SND_AZT3328 is not set +CONFIG_SND_BT87X=m +# CONFIG_SND_BT87X_OVERCLOCK is not set +CONFIG_SND_CA0106=m +CONFIG_SND_CMIPCI=m +CONFIG_SND_OXYGEN_LIB=m +CONFIG_SND_OXYGEN=m +# CONFIG_SND_CS4281 is not set +CONFIG_SND_CS46XX=m +CONFIG_SND_CS46XX_NEW_DSP=y +CONFIG_SND_CTXFI=m +CONFIG_SND_DARLA20=m +CONFIG_SND_GINA20=m +CONFIG_SND_LAYLA20=m +CONFIG_SND_DARLA24=m +CONFIG_SND_GINA24=m +CONFIG_SND_LAYLA24=m +CONFIG_SND_MONA=m +CONFIG_SND_MIA=m +CONFIG_SND_ECHO3G=m +CONFIG_SND_INDIGO=m +CONFIG_SND_INDIGOIO=m +CONFIG_SND_INDIGODJ=m +CONFIG_SND_INDIGOIOX=m +CONFIG_SND_INDIGODJX=m +CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1_SEQ=m +CONFIG_SND_EMU10K1X=m +CONFIG_SND_ENS1370=m +CONFIG_SND_ENS1371=m +# CONFIG_SND_ES1938 is not set +CONFIG_SND_ES1968=m +CONFIG_SND_ES1968_INPUT=y +CONFIG_SND_ES1968_RADIO=y +# CONFIG_SND_FM801 is not set +CONFIG_SND_HDSP=m +CONFIG_SND_HDSPM=m +CONFIG_SND_ICE1712=m +CONFIG_SND_ICE1724=m +CONFIG_SND_INTEL8X0=m +CONFIG_SND_INTEL8X0M=m +CONFIG_SND_KORG1212=m +CONFIG_SND_LOLA=m +CONFIG_SND_LX6464ES=m +CONFIG_SND_MAESTRO3=m +CONFIG_SND_MAESTRO3_INPUT=y +CONFIG_SND_MIXART=m +# CONFIG_SND_NM256 is not set +CONFIG_SND_PCXHR=m +# CONFIG_SND_RIPTIDE is not set +CONFIG_SND_RME32=m +CONFIG_SND_RME96=m +CONFIG_SND_RME9652=m +# CONFIG_SND_SONICVIBES is not set +CONFIG_SND_TRIDENT=m +CONFIG_SND_VIA82XX=m +CONFIG_SND_VIA82XX_MODEM=m +CONFIG_SND_VIRTUOSO=m +CONFIG_SND_VX222=m +# CONFIG_SND_YMFPCI is not set + +# +# HD-Audio +# +CONFIG_SND_HDA=m +CONFIG_SND_HDA_INTEL=m +CONFIG_SND_HDA_HWDEP=y +CONFIG_SND_HDA_RECONFIG=y +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_BEEP_MODE=0 +CONFIG_SND_HDA_PATCH_LOADER=y +CONFIG_SND_HDA_CODEC_REALTEK=m +CONFIG_SND_HDA_CODEC_ANALOG=m +CONFIG_SND_HDA_CODEC_SIGMATEL=m +CONFIG_SND_HDA_CODEC_VIA=m +CONFIG_SND_HDA_CODEC_HDMI=m +CONFIG_SND_HDA_CODEC_CIRRUS=m +CONFIG_SND_HDA_CODEC_CONEXANT=m +CONFIG_SND_HDA_CODEC_CA0110=m +CONFIG_SND_HDA_CODEC_CA0132=m +CONFIG_SND_HDA_CODEC_CA0132_DSP=y +CONFIG_SND_HDA_CODEC_CMEDIA=m +CONFIG_SND_HDA_CODEC_SI3054=m +CONFIG_SND_HDA_GENERIC=m +CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_CORE=m +CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_COMPONENT=y +CONFIG_SND_HDA_I915=y +CONFIG_SND_HDA_EXT_CORE=m +CONFIG_SND_HDA_PREALLOC_SIZE=512 +# CONFIG_SND_SPI is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_UA101=m +CONFIG_SND_USB_USX2Y=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y +CONFIG_SND_USB_US122L=m +CONFIG_SND_USB_6FIRE=m +CONFIG_SND_USB_HIFACE=m +CONFIG_SND_BCD2000=m +CONFIG_SND_USB_LINE6=m +CONFIG_SND_USB_POD=m +CONFIG_SND_USB_PODHD=m +CONFIG_SND_USB_TONEPORT=m +CONFIG_SND_USB_VARIAX=m +CONFIG_SND_FIREWIRE=y +CONFIG_SND_FIREWIRE_LIB=m +CONFIG_SND_DICE=m +CONFIG_SND_OXFW=m +CONFIG_SND_ISIGHT=m +CONFIG_SND_FIREWORKS=m +CONFIG_SND_BEBOB=m +CONFIG_SND_FIREWIRE_DIGI00X=m +CONFIG_SND_FIREWIRE_TASCAM=m +CONFIG_SND_FIREWIRE_MOTU=m +CONFIG_SND_FIREFACE=m +CONFIG_SND_SOC=m +CONFIG_SND_SOC_COMPRESS=y +CONFIG_SND_SOC_TOPOLOGY=y +CONFIG_SND_SOC_ACPI=m +# CONFIG_SND_SOC_AMD_ACP is not set +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_DESIGNWARE_I2S is not set + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# CONFIG_SND_I2S_HI6210_I2S is not set +# CONFIG_SND_SOC_IMG is not set +CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y +CONFIG_SND_SST_IPC=m +CONFIG_SND_SST_IPC_ACPI=m +CONFIG_SND_SOC_INTEL_SST_ACPI=m +CONFIG_SND_SOC_INTEL_SST=m +CONFIG_SND_SOC_INTEL_SST_FIRMWARE=m +CONFIG_SND_SOC_INTEL_HASWELL=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m +# CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI is not set +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m +CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m +CONFIG_SND_SOC_INTEL_SKYLAKE=m +CONFIG_SND_SOC_ACPI_INTEL_MATCH=m +CONFIG_SND_SOC_INTEL_MACH=y +# CONFIG_SND_SOC_INTEL_HASWELL_MACH is not set +# CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH is not set +# CONFIG_SND_SOC_INTEL_BROADWELL_MACH is not set +CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m +CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m +# CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH is not set + +# +# STMicroelectronics STM32 SOC audio support +# +# CONFIG_SND_SOC_XTFPGA_I2S is not set +# CONFIG_ZX_TDM is not set +CONFIG_SND_SOC_I2C_AND_SPI=m + +# +# CODEC drivers +# +# CONFIG_SND_SOC_AC97_CODEC is not set +# CONFIG_SND_SOC_ADAU1701 is not set +# CONFIG_SND_SOC_ADAU1761_I2C is not set +# CONFIG_SND_SOC_ADAU1761_SPI is not set +# CONFIG_SND_SOC_ADAU7002 is not set +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +# CONFIG_SND_SOC_AK5558 is not set +# CONFIG_SND_SOC_ALC5623 is not set +# CONFIG_SND_SOC_BD28623 is not set +# CONFIG_SND_SOC_BT_SCO is not set +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +# CONFIG_SND_SOC_CS35L34 is not set +# CONFIG_SND_SOC_CS35L35 is not set +# CONFIG_SND_SOC_CS42L42 is not set +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +# CONFIG_SND_SOC_CS43130 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_DA7213=m +CONFIG_SND_SOC_DA7219=m +CONFIG_SND_SOC_DMIC=m +# CONFIG_SND_SOC_ES7134 is not set +# CONFIG_SND_SOC_ES7241 is not set +CONFIG_SND_SOC_ES8316=m +# CONFIG_SND_SOC_ES8328_I2C is not set +# CONFIG_SND_SOC_ES8328_SPI is not set +# CONFIG_SND_SOC_GTM601 is not set +CONFIG_SND_SOC_HDAC_HDMI=m +# CONFIG_SND_SOC_INNO_RK3036 is not set +CONFIG_SND_SOC_MAX98090=m +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +# CONFIG_SND_SOC_MAX9867 is not set +CONFIG_SND_SOC_MAX98927=m +# CONFIG_SND_SOC_MAX98373 is not set +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +# CONFIG_SND_SOC_PCM1789_I2C is not set +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +# CONFIG_SND_SOC_PCM186X_I2C is not set +# CONFIG_SND_SOC_PCM186X_SPI is not set +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM512x_I2C is not set +# CONFIG_SND_SOC_PCM512x_SPI is not set +CONFIG_SND_SOC_RL6231=m +CONFIG_SND_SOC_RL6347A=m +CONFIG_SND_SOC_RT286=m +CONFIG_SND_SOC_RT298=m +CONFIG_SND_SOC_RT5514=m +CONFIG_SND_SOC_RT5514_SPI=m +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +CONFIG_SND_SOC_RT5640=m +CONFIG_SND_SOC_RT5645=m +CONFIG_SND_SOC_RT5651=m +CONFIG_SND_SOC_RT5663=m +CONFIG_SND_SOC_RT5670=m +# CONFIG_SND_SOC_SGTL5000 is not set +# CONFIG_SND_SOC_SIMPLE_AMPLIFIER is not set +# CONFIG_SND_SOC_SIRF_AUDIO_CODEC is not set +# CONFIG_SND_SOC_SPDIF is not set +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +CONFIG_SND_SOC_SSM4567=m +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +# CONFIG_SND_SOC_TAS6424 is not set +# CONFIG_SND_SOC_TDA7419 is not set +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +# CONFIG_SND_SOC_TLV320AIC32X4_I2C is not set +# CONFIG_SND_SOC_TLV320AIC32X4_SPI is not set +# CONFIG_SND_SOC_TLV320AIC3X is not set +CONFIG_SND_SOC_TS3A227E=m +# CONFIG_SND_SOC_TSCS42XX is not set +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +# CONFIG_SND_SOC_WM8524 is not set +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +# CONFIG_SND_SOC_WM8804_I2C is not set +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +# CONFIG_SND_SOC_MAX9759 is not set +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_NAU8540 is not set +# CONFIG_SND_SOC_NAU8810 is not set +CONFIG_SND_SOC_NAU8824=m +CONFIG_SND_SOC_NAU8825=m +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SIMPLE_CARD is not set +CONFIG_SND_X86=y +CONFIG_HDMI_LPE_AUDIO=m +CONFIG_SND_SYNTH_EMUX=m +CONFIG_SND_XEN_FRONTEND=m +CONFIG_AC97_BUS=m + +# +# HID support +# +CONFIG_HID=y +CONFIG_HID_BATTERY_STRENGTH=y +CONFIG_HIDRAW=y +CONFIG_UHID=m +CONFIG_HID_GENERIC=y + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=m +# CONFIG_HID_ACCUTOUCH is not set +CONFIG_HID_ACRUX=m +# CONFIG_HID_ACRUX_FF is not set +CONFIG_HID_APPLE=m +CONFIG_HID_APPLEIR=m +CONFIG_HID_ASUS=m +CONFIG_HID_AUREAL=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BETOP_FF=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CORSAIR=m +# CONFIG_HID_COUGAR is not set +CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CMEDIA=m +# CONFIG_HID_CP2112 is not set +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EMS_FF is not set +CONFIG_HID_ELAN=m +CONFIG_HID_ELECOM=m +CONFIG_HID_ELO=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GEMBIRD=m +CONFIG_HID_GFRM=m +CONFIG_HID_HOLTEK=m +# CONFIG_HOLTEK_FF is not set +# CONFIG_HID_GOOGLE_HAMMER is not set +CONFIG_HID_GT683R=m +CONFIG_HID_KEYTOUCH=m +CONFIG_HID_KYE=m +CONFIG_HID_UCLOGIC=m +CONFIG_HID_WALTOP=m +CONFIG_HID_GYRATION=m +CONFIG_HID_ICADE=m +CONFIG_HID_ITE=m +CONFIG_HID_JABRA=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LCPOWER=m +CONFIG_HID_LED=m +CONFIG_HID_LENOVO=m +CONFIG_HID_LOGITECH=m +CONFIG_HID_LOGITECH_DJ=m +CONFIG_HID_LOGITECH_HIDPP=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +# CONFIG_LOGIWHEELS_FF is not set +CONFIG_HID_MAGICMOUSE=y +# CONFIG_HID_MAYFLASH is not set +# CONFIG_HID_REDRAGON is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTI=m +CONFIG_HID_NTRIG=y +CONFIG_HID_ORTEK=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PENMOUNT=m +CONFIG_HID_PETALYNX=m +CONFIG_HID_PICOLCD=m +CONFIG_HID_PICOLCD_FB=y +CONFIG_HID_PICOLCD_BACKLIGHT=y +CONFIG_HID_PICOLCD_LCD=y +CONFIG_HID_PICOLCD_LEDS=y +CONFIG_HID_PICOLCD_CIR=y +CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PRIMAX=m +# CONFIG_HID_RETRODE is not set +CONFIG_HID_ROCCAT=m +CONFIG_HID_SAITEK=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_SONY_FF=y +CONFIG_HID_SPEEDLINK=m +# CONFIG_HID_STEAM is not set +CONFIG_HID_STEELSERIES=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_RMI=m +CONFIG_HID_GREENASIA=m +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_HYPERV_MOUSE=m +CONFIG_HID_SMARTJOYPLUS=m +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TIVO=m +CONFIG_HID_TOPSEED=m +CONFIG_HID_THINGM=m +CONFIG_HID_THRUSTMASTER=m +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_HID_UDRAW_PS3 is not set +CONFIG_HID_WACOM=m +CONFIG_HID_WIIMOTE=m +CONFIG_HID_XINMO=m +CONFIG_HID_ZEROPLUS=m +# CONFIG_ZEROPLUS_FF is not set +CONFIG_HID_ZYDACRON=m +CONFIG_HID_SENSOR_HUB=y +CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_ALPS=m + +# +# USB HID support +# +CONFIG_USB_HID=y +CONFIG_HID_PID=y +CONFIG_USB_HIDDEV=y + +# +# I2C HID support +# +CONFIG_I2C_HID=m + +# +# Intel ISH HID support +# +CONFIG_INTEL_ISH_HID=m +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_COMMON=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB=y +CONFIG_USB_PCI=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_LEDS_TRIGGER_USBPORT=m +CONFIG_USB_MON=y +CONFIG_USB_WUSB=m +CONFIG_USB_WUSB_CBAF=m +# CONFIG_USB_WUSB_CBAF_DEBUG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DBGCAP=y +CONFIG_USB_XHCI_PCI=y +# CONFIG_USB_XHCI_PLATFORM is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +CONFIG_USB_EHCI_PCI=y +# CONFIG_USB_EHCI_HCD_PLATFORM is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_FOTG210_HCD is not set +# CONFIG_USB_MAX3421_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PCI=y +# CONFIG_USB_OHCI_HCD_PLATFORM is not set +CONFIG_USB_UHCI_HCD=y +# CONFIG_USB_U132_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_HCD_BCMA is not set +# CONFIG_USB_HCD_TEST_MODE is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_WDM=m +CONFIG_USB_TMC=m + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_REALTEK=m +CONFIG_REALTEK_AUTOPM=y +CONFIG_USB_STORAGE_DATAFAB=m +CONFIG_USB_STORAGE_FREECOM=m +CONFIG_USB_STORAGE_ISD200=m +CONFIG_USB_STORAGE_USBAT=m +CONFIG_USB_STORAGE_SDDR09=m +CONFIG_USB_STORAGE_SDDR55=m +CONFIG_USB_STORAGE_JUMPSHOT=m +CONFIG_USB_STORAGE_ALAUDA=m +CONFIG_USB_STORAGE_ONETOUCH=m +CONFIG_USB_STORAGE_KARMA=m +CONFIG_USB_STORAGE_CYPRESS_ATACB=m +CONFIG_USB_STORAGE_ENE_UB6250=m +CONFIG_USB_UAS=m + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m +# CONFIG_USBIP_CORE is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_DWC3 is not set +# CONFIG_USB_DWC2 is not set +# CONFIG_USB_CHIPIDEA is not set +# CONFIG_USB_ISP1760 is not set + +# +# USB port drivers +# +CONFIG_USB_USS720=m +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_SIMPLE is not set +CONFIG_USB_SERIAL_AIRCABLE=m +CONFIG_USB_SERIAL_ARK3116=m +CONFIG_USB_SERIAL_BELKIN=m +CONFIG_USB_SERIAL_CH341=m +CONFIG_USB_SERIAL_WHITEHEAT=m +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +CONFIG_USB_SERIAL_CP210X=m +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +# CONFIG_USB_SERIAL_F81232 is not set +CONFIG_USB_SERIAL_F8153X=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_IUU=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_METRO is not set +CONFIG_USB_SERIAL_MOS7720=m +CONFIG_USB_SERIAL_MOS7715_PARPORT=y +CONFIG_USB_SERIAL_MOS7840=m +CONFIG_USB_SERIAL_MXUPORT=m +CONFIG_USB_SERIAL_NAVMAN=m +CONFIG_USB_SERIAL_PL2303=m +CONFIG_USB_SERIAL_OTI6858=m +CONFIG_USB_SERIAL_QCAUX=m +CONFIG_USB_SERIAL_QUALCOMM=m +CONFIG_USB_SERIAL_SPCP8X5=m +CONFIG_USB_SERIAL_SAFE=m +CONFIG_USB_SERIAL_SAFE_PADDED=y +CONFIG_USB_SERIAL_SIERRAWIRELESS=m +CONFIG_USB_SERIAL_SYMBOL=m +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_WWAN=m +CONFIG_USB_SERIAL_OPTION=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_SERIAL_OPTICON=m +CONFIG_USB_SERIAL_XSENS_MT=m +# CONFIG_USB_SERIAL_WISHBONE is not set +CONFIG_USB_SERIAL_SSU100=m +CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_UPD78F0730=m +CONFIG_USB_SERIAL_DEBUG=m + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_ADUTUX=m +CONFIG_USB_SEVSEG=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +CONFIG_USB_IDMOUSE=m +CONFIG_USB_FTDI_ELAN=m +CONFIG_USB_APPLEDISPLAY=m +CONFIG_USB_SISUSBVGA=m +CONFIG_USB_SISUSBVGA_CON=y +CONFIG_USB_LD=m +# CONFIG_USB_TRANCEVIBRATOR is not set +CONFIG_USB_IOWARRIOR=m +# CONFIG_USB_TEST is not set +# CONFIG_USB_EHSET_TEST_FIXTURE is not set +CONFIG_USB_ISIGHTFW=m +# CONFIG_USB_YUREX is not set +CONFIG_USB_EZUSB_FX2=m +# CONFIG_USB_HUB_USB251XB is not set +CONFIG_USB_HSIC_USB3503=m +# CONFIG_USB_HSIC_USB4604 is not set +# CONFIG_USB_LINK_LAYER_TEST is not set +# CONFIG_USB_CHAOSKEY is not set +CONFIG_USB_ATM=m +CONFIG_USB_SPEEDTOUCH=m +CONFIG_USB_CXACRU=m +CONFIG_USB_UEAGLEATM=m +CONFIG_USB_XUSBATM=m + +# +# USB Physical Layer drivers +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ISP1301 is not set +# CONFIG_USB_GADGET is not set +CONFIG_TYPEC=y +CONFIG_TYPEC_TCPM=y +CONFIG_TYPEC_TCPCI=y +CONFIG_TYPEC_RT1711H=y +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_UCSI=y +CONFIG_UCSI_ACPI=y +CONFIG_TYPEC_TPS6598X=m + +# +# USB Type-C Multiplexer/DeMultiplexer Switch support +# +CONFIG_TYPEC_MUX_PI3USB30532=m + +# +# USB Type-C Alternate Mode drivers +# +CONFIG_TYPEC_DP_ALTMODE=y +CONFIG_USB_ROLE_SWITCH=y +CONFIG_USB_ROLES_INTEL_XHCI=y +CONFIG_USB_LED_TRIG=y +# CONFIG_USB_ULPI_BUS is not set +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +CONFIG_UWB_I1480U=m +CONFIG_MMC=m +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_MINORS=8 +CONFIG_SDIO_UART=m +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_PCI=m +CONFIG_MMC_RICOH_MMC=y +CONFIG_MMC_SDHCI_ACPI=m +CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set +# CONFIG_MMC_WBSD is not set +CONFIG_MMC_TIFM_SD=m +# CONFIG_MMC_SPI is not set +CONFIG_MMC_CB710=m +CONFIG_MMC_VIA_SDMMC=m +CONFIG_MMC_VUB300=m +CONFIG_MMC_USHC=m +# CONFIG_MMC_USDHI6ROL0 is not set +CONFIG_MMC_REALTEK_PCI=m +CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_CQHCI=m +# CONFIG_MMC_TOSHIBA_PCI is not set +# CONFIG_MMC_MTK is not set +# CONFIG_MMC_SDHCI_XENON is not set +CONFIG_MEMSTICK=m +# CONFIG_MEMSTICK_DEBUG is not set + +# +# MemoryStick drivers +# +# CONFIG_MEMSTICK_UNSAFE_RESUME is not set +CONFIG_MSPRO_BLOCK=m +# CONFIG_MS_BLOCK is not set + +# +# MemoryStick Host Controller Drivers +# +CONFIG_MEMSTICK_TIFM_MS=m +CONFIG_MEMSTICK_JMICRON_38X=m +CONFIG_MEMSTICK_R592=m +CONFIG_MEMSTICK_REALTEK_PCI=m +CONFIG_MEMSTICK_REALTEK_USB=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +# CONFIG_LEDS_CLASS_FLASH is not set +# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set + +# +# LED drivers +# +# CONFIG_LEDS_APU is not set +CONFIG_LEDS_LM3530=m +# CONFIG_LEDS_LM3642 is not set +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +CONFIG_LEDS_LP3944=m +# CONFIG_LEDS_LP3952 is not set +CONFIG_LEDS_LP55XX_COMMON=m +CONFIG_LEDS_LP5521=m +CONFIG_LEDS_LP5523=m +CONFIG_LEDS_LP5562=m +# CONFIG_LEDS_LP8501 is not set +CONFIG_LEDS_CLEVO_MAIL=m +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_PCA963X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_PWM is not set +# CONFIG_LEDS_BD2802 is not set +CONFIG_LEDS_INTEL_SS4200=m +CONFIG_LEDS_LT3593=m +# CONFIG_LEDS_TCA6507 is not set +# CONFIG_LEDS_TLC591XX is not set +# CONFIG_LEDS_LM355x is not set + +# +# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) +# +CONFIG_LEDS_BLINKM=m +CONFIG_LEDS_MLXCPLD=m +# CONFIG_LEDS_MLXREG is not set +# CONFIG_LEDS_USER is not set +# CONFIG_LEDS_NIC78BX is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_DISK=y +# CONFIG_LEDS_TRIGGER_MTD is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_BACKLIGHT=m +# CONFIG_LEDS_TRIGGER_CPU is not set +# CONFIG_LEDS_TRIGGER_ACTIVITY is not set +CONFIG_LEDS_TRIGGER_GPIO=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m + +# +# iptables trigger is under Netfilter config (LED target) +# +CONFIG_LEDS_TRIGGER_TRANSIENT=m +CONFIG_LEDS_TRIGGER_CAMERA=m +# CONFIG_LEDS_TRIGGER_PANIC is not set +# CONFIG_LEDS_TRIGGER_NETDEV is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_INFINIBAND=m +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +# CONFIG_INFINIBAND_EXP_LEGACY_VERBS_NEW_UAPI is not set +CONFIG_INFINIBAND_USER_MEM=y +CONFIG_INFINIBAND_ON_DEMAND_PAGING=y +CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y +# CONFIG_INFINIBAND_MTHCA is not set +# CONFIG_INFINIBAND_QIB is not set +CONFIG_INFINIBAND_CXGB4=m +CONFIG_INFINIBAND_I40IW=m +CONFIG_MLX4_INFINIBAND=m +CONFIG_MLX5_INFINIBAND=m +# CONFIG_INFINIBAND_NES is not set +# CONFIG_INFINIBAND_OCRDMA is not set +CONFIG_INFINIBAND_VMWARE_PVRDMA=m +CONFIG_INFINIBAND_USNIC=m +CONFIG_INFINIBAND_IPOIB=m +CONFIG_INFINIBAND_IPOIB_CM=y +CONFIG_INFINIBAND_IPOIB_DEBUG=y +# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_SRP=m +CONFIG_INFINIBAND_SRPT=m +CONFIG_INFINIBAND_ISER=m +CONFIG_INFINIBAND_ISERT=m +CONFIG_INFINIBAND_OPA_VNIC=m +CONFIG_INFINIBAND_RDMAVT=m +CONFIG_RDMA_RXE=m +CONFIG_INFINIBAND_HFI1=m +# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set +# CONFIG_SDMA_VERBOSITY is not set +CONFIG_INFINIBAND_QEDR=m +CONFIG_INFINIBAND_BNXT_RE=m +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EDAC=y +CONFIG_EDAC_LEGACY_SYSFS=y +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_DECODE_MCE=m +CONFIG_EDAC_GHES=y +CONFIG_EDAC_AMD64=m +# CONFIG_EDAC_AMD64_ERROR_INJECTION is not set +CONFIG_EDAC_E752X=m +CONFIG_EDAC_I82975X=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I3200=m +CONFIG_EDAC_IE31200=m +CONFIG_EDAC_X38=m +CONFIG_EDAC_I5400=m +CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I5000=m +CONFIG_EDAC_I5100=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_SBRIDGE=m +CONFIG_EDAC_SKX=m +CONFIG_EDAC_PND2=m +CONFIG_RTC_LIB=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_SYSTOHC is not set +# CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_ABB5ZES3 is not set +# CONFIG_RTC_DRV_ABX80X is not set +CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1307_CENTURY is not set +CONFIG_RTC_DRV_DS1374=m +# CONFIG_RTC_DRV_DS1374_WDT is not set +CONFIG_RTC_DRV_DS1672=m +CONFIG_RTC_DRV_MAX6900=m +CONFIG_RTC_DRV_RS5C372=m +CONFIG_RTC_DRV_ISL1208=m +CONFIG_RTC_DRV_ISL12022=m +CONFIG_RTC_DRV_X1205=m +CONFIG_RTC_DRV_PCF8523=m +# CONFIG_RTC_DRV_PCF85063 is not set +# CONFIG_RTC_DRV_PCF85363 is not set +CONFIG_RTC_DRV_PCF8563=m +CONFIG_RTC_DRV_PCF8583=m +CONFIG_RTC_DRV_M41T80=m +CONFIG_RTC_DRV_M41T80_WDT=y +CONFIG_RTC_DRV_BQ32K=m +# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_FM3130=m +# CONFIG_RTC_DRV_RX8010 is not set +CONFIG_RTC_DRV_RX8581=m +CONFIG_RTC_DRV_RX8025=m +CONFIG_RTC_DRV_EM3027=m +# CONFIG_RTC_DRV_RV8803 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +CONFIG_RTC_DRV_RX4581=m +# CONFIG_RTC_DRV_RX6110 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=y + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_DS3232_HWMON=y +# CONFIG_RTC_DRV_PCF2127 is not set +CONFIG_RTC_DRV_RV3029C2=m +# CONFIG_RTC_DRV_RV3029_HWMON is not set + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_CMOS=y +CONFIG_RTC_DRV_DS1286=m +CONFIG_RTC_DRV_DS1511=m +CONFIG_RTC_DRV_DS1553=m +# CONFIG_RTC_DRV_DS1685_FAMILY is not set +CONFIG_RTC_DRV_DS1742=m +CONFIG_RTC_DRV_DS2404=m +CONFIG_RTC_DRV_STK17TA8=m +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_M48T35=m +CONFIG_RTC_DRV_M48T59=m +CONFIG_RTC_DRV_MSM6242=m +CONFIG_RTC_DRV_BQ4802=m +CONFIG_RTC_DRV_RP5C01=m +CONFIG_RTC_DRV_V3020=m + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_FTRTC010 is not set + +# +# HID Sensor RTC drivers +# +# CONFIG_RTC_DRV_HID_SENSOR_TIME is not set +CONFIG_DMADEVICES=y +# CONFIG_DMADEVICES_DEBUG is not set + +# +# DMA Devices +# +CONFIG_DMA_ENGINE=y +CONFIG_DMA_VIRTUAL_CHANNELS=y +CONFIG_DMA_ACPI=y +# CONFIG_ALTERA_MSGDMA is not set +CONFIG_INTEL_IDMA64=m +CONFIG_INTEL_IOATDMA=m +# CONFIG_QCOM_HIDMA_MGMT is not set +# CONFIG_QCOM_HIDMA is not set +CONFIG_DW_DMAC_CORE=y +CONFIG_DW_DMAC=m +CONFIG_DW_DMAC_PCI=y +CONFIG_HSU_DMA=y + +# +# DMA Clients +# +CONFIG_ASYNC_TX_DMA=y +# CONFIG_DMATEST is not set +CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +CONFIG_DCA=m +# CONFIG_AUXDISPLAY is not set +# CONFIG_PANEL is not set +CONFIG_UIO=m +CONFIG_UIO_CIF=m +CONFIG_UIO_PDRV_GENIRQ=m +# CONFIG_UIO_DMEM_GENIRQ is not set +CONFIG_UIO_AEC=m +CONFIG_UIO_SERCOS3=m +CONFIG_UIO_PCI_GENERIC=m +# CONFIG_UIO_NETX is not set +# CONFIG_UIO_PRUSS is not set +# CONFIG_UIO_MF624 is not set +CONFIG_UIO_HV_GENERIC=m +CONFIG_VFIO_IOMMU_TYPE1=m +CONFIG_VFIO_VIRQFD=m +CONFIG_VFIO=m +CONFIG_VFIO_NOIOMMU=y +CONFIG_VFIO_PCI=m +# CONFIG_VFIO_PCI_VGA is not set +CONFIG_VFIO_PCI_MMAP=y +CONFIG_VFIO_PCI_INTX=y +# CONFIG_VFIO_PCI_IGD is not set +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m +CONFIG_IRQ_BYPASS_MANAGER=m +# CONFIG_VIRT_DRIVERS is not set +CONFIG_VIRTIO=y +CONFIG_VIRTIO_MENU=y +CONFIG_VIRTIO_PCI=y +CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_INPUT=m +# CONFIG_VIRTIO_MMIO is not set + +# +# Microsoft Hyper-V guest support +# +CONFIG_HYPERV=m +CONFIG_HYPERV_TSCPAGE=y +CONFIG_HYPERV_UTILS=m +CONFIG_HYPERV_BALLOON=m + +# +# Xen driver support +# +CONFIG_XEN_BALLOON=y +# CONFIG_XEN_SELFBALLOONING is not set +# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y +CONFIG_XEN_DEV_EVTCHN=m +CONFIG_XENFS=m +CONFIG_XEN_COMPAT_XENFS=y +CONFIG_XEN_SYS_HYPERVISOR=y +CONFIG_XEN_XENBUS_FRONTEND=y +# CONFIG_XEN_GNTDEV is not set +# CONFIG_XEN_GRANT_DEV_ALLOC is not set +# CONFIG_XEN_GRANT_DMA_ALLOC is not set +CONFIG_SWIOTLB_XEN=y +CONFIG_XEN_TMEM=m +# CONFIG_XEN_PVCALLS_FRONTEND is not set +CONFIG_XEN_PRIVCMD=m +CONFIG_XEN_EFI=y +CONFIG_XEN_AUTO_XLATE=y +CONFIG_XEN_ACPI=y +# CONFIG_STAGING is not set +CONFIG_X86_PLATFORM_DEVICES=y +CONFIG_ACER_WMI=m +# CONFIG_ACER_WIRELESS is not set +CONFIG_ACERHDF=m +# CONFIG_ALIENWARE_WMI is not set +CONFIG_ASUS_LAPTOP=m +CONFIG_DELL_SMBIOS=m +CONFIG_DELL_SMBIOS_WMI=y +# CONFIG_DELL_SMBIOS_SMM is not set +CONFIG_DELL_LAPTOP=m +CONFIG_DELL_WMI=m +CONFIG_DELL_WMI_DESCRIPTOR=m +CONFIG_DELL_WMI_AIO=m +CONFIG_DELL_WMI_LED=m +CONFIG_DELL_SMO8800=m +CONFIG_DELL_RBTN=m +CONFIG_FUJITSU_LAPTOP=m +CONFIG_FUJITSU_TABLET=m +CONFIG_AMILO_RFKILL=m +# CONFIG_GPD_POCKET_FAN is not set +CONFIG_HP_ACCEL=m +CONFIG_HP_WIRELESS=m +CONFIG_HP_WMI=m +CONFIG_MSI_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_IDEAPAD_LAPTOP=m +# CONFIG_SURFACE3_WMI is not set +CONFIG_THINKPAD_ACPI=m +CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y +# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set +# CONFIG_THINKPAD_ACPI_DEBUG is not set +# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set +CONFIG_THINKPAD_ACPI_VIDEO=y +CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y +CONFIG_SENSORS_HDAPS=m +# CONFIG_INTEL_MENLOW is not set +CONFIG_EEEPC_LAPTOP=m +CONFIG_ASUS_WMI=m +CONFIG_ASUS_NB_WMI=m +CONFIG_EEEPC_WMI=m +# CONFIG_ASUS_WIRELESS is not set +CONFIG_ACPI_WMI=m +CONFIG_WMI_BMOF=m +CONFIG_INTEL_WMI_THUNDERBOLT=m +CONFIG_MSI_WMI=m +# CONFIG_PEAQ_WMI is not set +CONFIG_TOPSTAR_LAPTOP=m +# CONFIG_ACPI_TOSHIBA is not set +CONFIG_TOSHIBA_BT_RFKILL=m +# CONFIG_TOSHIBA_HAPS is not set +# CONFIG_TOSHIBA_WMI is not set +CONFIG_ACPI_CMPC=m +# CONFIG_INTEL_INT0002_VGPIO is not set +CONFIG_INTEL_HID_EVENT=m +CONFIG_INTEL_VBTN=m +CONFIG_INTEL_IPS=m +CONFIG_INTEL_PMC_CORE=m +# CONFIG_IBM_RTL is not set +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_MXM_WMI=m +CONFIG_INTEL_OAKTRAIL=m +CONFIG_SAMSUNG_Q10=m +CONFIG_APPLE_GMUX=m +CONFIG_INTEL_RST=m +# CONFIG_INTEL_SMARTCONNECT is not set +CONFIG_PVPANIC=y +# CONFIG_INTEL_PMC_IPC is not set +# CONFIG_SURFACE_PRO3_BUTTON is not set +# CONFIG_INTEL_PUNIT_IPC is not set +CONFIG_MLX_PLATFORM=m +CONFIG_INTEL_TURBO_MAX_3=y +# CONFIG_I2C_MULTI_INSTANTIATE is not set +# CONFIG_INTEL_ATOMISP2_PM is not set +CONFIG_PMC_ATOM=y +# CONFIG_CHROME_PLATFORMS is not set +CONFIG_MELLANOX_PLATFORM=y +CONFIG_MLXREG_HOTPLUG=m +# CONFIG_MLXREG_IO is not set +CONFIG_CLKDEV_LOOKUP=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_COMMON_CLK=y + +# +# Common Clock Framework +# +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_SI5351 is not set +# CONFIG_COMMON_CLK_SI544 is not set +# CONFIG_COMMON_CLK_CDCE706 is not set +# CONFIG_COMMON_CLK_CS2000_CP is not set +# CONFIG_COMMON_CLK_PWM is not set +CONFIG_HWSPINLOCK=y + +# +# Clock Source drivers +# +CONFIG_CLKEVT_I8253=y +CONFIG_I8253_LOCK=y +CONFIG_CLKBLD_I8253=y +CONFIG_MAILBOX=y +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_API=y +CONFIG_IOMMU_SUPPORT=y + +# +# Generic IOMMU Pagetable Support +# + +# +# Generic PASID table support +# +# CONFIG_IOMMU_DEBUGFS is not set +CONFIG_IOMMU_DEFAULT_PASSTHROUGH=y +CONFIG_IOMMU_IOVA=y +CONFIG_AMD_IOMMU=y +CONFIG_AMD_IOMMU_V2=m +CONFIG_DMAR_TABLE=y +CONFIG_INTEL_IOMMU=y +# CONFIG_INTEL_IOMMU_SVM is not set +# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set +CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_IRQ_REMAP=y +# CONFIG_SMMU_BYPASS_DEV is not set + +# +# Remoteproc drivers +# +# CONFIG_REMOTEPROC is not set + +# +# Rpmsg drivers +# +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +# CONFIG_RPMSG_VIRTIO is not set +# CONFIG_SOUNDWIRE is not set + +# +# SOC (System On Chip) specific Drivers +# + +# +# Amlogic SoC drivers +# + +# +# Broadcom SoC drivers +# + +# +# NXP/Freescale QorIQ SoC drivers +# + +# +# i.MX SoC drivers +# + +# +# Qualcomm SoC drivers +# +# CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# CONFIG_XILINX_VCU is not set +CONFIG_SOC_HISILICON_LBC=m +CONFIG_SOC_HISILICON_SYSCTL=m +# CONFIG_PM_DEVFREQ is not set +# CONFIG_EXTCON is not set +# CONFIG_MEMORY is not set +CONFIG_IIO=m +CONFIG_IIO_BUFFER=y +# CONFIG_IIO_BUFFER_CB is not set +# CONFIG_IIO_BUFFER_HW_CONSUMER is not set +CONFIG_IIO_KFIFO_BUF=m +CONFIG_IIO_TRIGGERED_BUFFER=m +# CONFIG_IIO_CONFIGFS is not set +CONFIG_IIO_TRIGGER=y +CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +# CONFIG_IIO_SW_DEVICE is not set +# CONFIG_IIO_SW_TRIGGER is not set + +# +# Accelerometers +# +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +# CONFIG_ADXL345_I2C is not set +# CONFIG_ADXL345_SPI is not set +# CONFIG_BMA180 is not set +# CONFIG_BMA220 is not set +# CONFIG_BMC150_ACCEL is not set +# CONFIG_DA280 is not set +# CONFIG_DA311 is not set +# CONFIG_DMARD09 is not set +# CONFIG_DMARD10 is not set +CONFIG_HID_SENSOR_ACCEL_3D=m +# CONFIG_IIO_CROS_EC_ACCEL_LEGACY is not set +# CONFIG_IIO_ST_ACCEL_3AXIS is not set +# CONFIG_KXSD9 is not set +# CONFIG_KXCJK1013 is not set +# CONFIG_MC3230 is not set +# CONFIG_MMA7455_I2C is not set +# CONFIG_MMA7455_SPI is not set +# CONFIG_MMA7660 is not set +# CONFIG_MMA8452 is not set +# CONFIG_MMA9551 is not set +# CONFIG_MMA9553 is not set +# CONFIG_MXC4005 is not set +# CONFIG_MXC6255 is not set +# CONFIG_SCA3000 is not set +# CONFIG_STK8312 is not set +# CONFIG_STK8BA50 is not set + +# +# Analog to digital converters +# +# CONFIG_AD7266 is not set +# CONFIG_AD7291 is not set +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD799X is not set +# CONFIG_HI8435 is not set +# CONFIG_HX711 is not set +# CONFIG_INA2XX_ADC is not set +# CONFIG_LTC2471 is not set +# CONFIG_LTC2485 is not set +# CONFIG_LTC2497 is not set +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +# CONFIG_MAX1363 is not set +# CONFIG_MAX9611 is not set +# CONFIG_MCP320X is not set +# CONFIG_MCP3422 is not set +# CONFIG_NAU7802 is not set +# CONFIG_TI_ADC081C is not set +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +# CONFIG_TI_ADS1015 is not set +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_TLC4541 is not set +# CONFIG_VIPERBOARD_ADC is not set + +# +# Analog Front Ends +# + +# +# Amplifiers +# +# CONFIG_AD8366 is not set + +# +# Chemical Sensors +# +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_VZ89X is not set + +# +# Hid Sensor IIO Common +# +CONFIG_HID_SENSOR_IIO_COMMON=m +CONFIG_HID_SENSOR_IIO_TRIGGER=m + +# +# SSP Sensor Common +# +# CONFIG_IIO_SSP_SENSORHUB is not set + +# +# Counters +# + +# +# Digital to analog converters +# +# CONFIG_AD5064 is not set +# CONFIG_AD5360 is not set +# CONFIG_AD5380 is not set +# CONFIG_AD5421 is not set +# CONFIG_AD5446 is not set +# CONFIG_AD5449 is not set +# CONFIG_AD5592R is not set +# CONFIG_AD5593R is not set +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +# CONFIG_LTC2632 is not set +# CONFIG_AD5686_SPI is not set +# CONFIG_AD5696_I2C is not set +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +# CONFIG_DS4424 is not set +# CONFIG_M62332 is not set +# CONFIG_MAX517 is not set +# CONFIG_MCP4725 is not set +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +# CONFIG_TI_DAC5571 is not set + +# +# IIO dummy driver +# + +# +# Frequency Synthesizers DDS/PLL +# + +# +# Clock Generator/Distribution +# +# CONFIG_AD9523 is not set + +# +# Phase-Locked Loop (PLL) frequency synthesizers +# +# CONFIG_ADF4350 is not set + +# +# Digital gyroscope sensors +# +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +# CONFIG_ADXRS450 is not set +# CONFIG_BMG160 is not set +CONFIG_HID_SENSOR_GYRO_3D=m +# CONFIG_MPU3050_I2C is not set +# CONFIG_IIO_ST_GYRO_3AXIS is not set +# CONFIG_ITG3200 is not set + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set + +# +# Humidity sensors +# +# CONFIG_AM2315 is not set +# CONFIG_DHT11 is not set +# CONFIG_HDC100X is not set +CONFIG_HID_SENSOR_HUMIDITY=m +# CONFIG_HTS221 is not set +# CONFIG_HTU21 is not set +# CONFIG_SI7005 is not set +# CONFIG_SI7020 is not set + +# +# Inertial measurement units +# +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +# CONFIG_KMX61 is not set +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set + +# +# Light sensors +# +# CONFIG_ACPI_ALS is not set +# CONFIG_ADJD_S311 is not set +# CONFIG_AL3320A is not set +# CONFIG_APDS9300 is not set +# CONFIG_APDS9960 is not set +# CONFIG_BH1750 is not set +# CONFIG_BH1780 is not set +# CONFIG_CM32181 is not set +# CONFIG_CM3232 is not set +# CONFIG_CM3323 is not set +# CONFIG_CM36651 is not set +# CONFIG_GP2AP020A00F is not set +# CONFIG_SENSORS_ISL29018 is not set +# CONFIG_SENSORS_ISL29028 is not set +# CONFIG_ISL29125 is not set +CONFIG_HID_SENSOR_ALS=m +CONFIG_HID_SENSOR_PROX=m +# CONFIG_JSA1212 is not set +# CONFIG_RPR0521 is not set +# CONFIG_LTR501 is not set +# CONFIG_LV0104CS is not set +# CONFIG_MAX44000 is not set +# CONFIG_OPT3001 is not set +# CONFIG_PA12203001 is not set +# CONFIG_SI1133 is not set +# CONFIG_SI1145 is not set +# CONFIG_STK3310 is not set +# CONFIG_ST_UVIS25 is not set +# CONFIG_TCS3414 is not set +# CONFIG_TCS3472 is not set +# CONFIG_SENSORS_TSL2563 is not set +# CONFIG_TSL2583 is not set +# CONFIG_TSL2772 is not set +# CONFIG_TSL4531 is not set +# CONFIG_US5182D is not set +# CONFIG_VCNL4000 is not set +# CONFIG_VEML6070 is not set +# CONFIG_VL6180 is not set +# CONFIG_ZOPT2201 is not set + +# +# Magnetometer sensors +# +# CONFIG_AK8975 is not set +# CONFIG_AK09911 is not set +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set +# CONFIG_MAG3110 is not set +CONFIG_HID_SENSOR_MAGNETOMETER_3D=m +# CONFIG_MMC35240 is not set +# CONFIG_IIO_ST_MAGN_3AXIS is not set +# CONFIG_SENSORS_HMC5843_I2C is not set +# CONFIG_SENSORS_HMC5843_SPI is not set + +# +# Multiplexers +# + +# +# Inclinometer sensors +# +CONFIG_HID_SENSOR_INCLINOMETER_3D=m +CONFIG_HID_SENSOR_DEVICE_ROTATION=m + +# +# Triggers - standalone +# +# CONFIG_IIO_INTERRUPT_TRIGGER is not set +# CONFIG_IIO_SYSFS_TRIGGER is not set + +# +# Digital potentiometers +# +# CONFIG_AD5272 is not set +# CONFIG_DS1803 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +# CONFIG_MCP4018 is not set +# CONFIG_MCP4131 is not set +# CONFIG_MCP4531 is not set +# CONFIG_TPL0102 is not set + +# +# Digital potentiostats +# +# CONFIG_LMP91000 is not set + +# +# Pressure sensors +# +# CONFIG_ABP060MG is not set +# CONFIG_BMP280 is not set +CONFIG_HID_SENSOR_PRESS=m +# CONFIG_HP03 is not set +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set +# CONFIG_MPL3115 is not set +# CONFIG_MS5611 is not set +# CONFIG_MS5637 is not set +# CONFIG_IIO_ST_PRESS is not set +# CONFIG_T5403 is not set +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set + +# +# Lightning sensors +# +# CONFIG_AS3935 is not set + +# +# Proximity and distance sensors +# +# CONFIG_ISL29501 is not set +# CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +# CONFIG_SX9500 is not set +# CONFIG_SRF08 is not set + +# +# Resolver to digital converters +# +# CONFIG_AD2S1200 is not set + +# +# Temperature sensors +# +# CONFIG_MAXIM_THERMOCOUPLE is not set +CONFIG_HID_SENSOR_TEMP=m +# CONFIG_MLX90614 is not set +# CONFIG_MLX90632 is not set +# CONFIG_TMP006 is not set +# CONFIG_TMP007 is not set +# CONFIG_TSYS01 is not set +# CONFIG_TSYS02D is not set +CONFIG_NTB=m +# CONFIG_NTB_AMD is not set +# CONFIG_NTB_IDT is not set +# CONFIG_NTB_INTEL is not set +# CONFIG_NTB_SWITCHTEC is not set +# CONFIG_NTB_PINGPONG is not set +# CONFIG_NTB_TOOL is not set +# CONFIG_NTB_PERF is not set +# CONFIG_NTB_TRANSPORT is not set +# CONFIG_VME_BUS is not set +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_PWM_LPSS=m +CONFIG_PWM_LPSS_PCI=m +CONFIG_PWM_LPSS_PLATFORM=m +# CONFIG_PWM_PCA9685 is not set + +# +# IRQ chip support +# +CONFIG_ARM_GIC_MAX_NR=1 +# CONFIG_IPACK_BUS is not set +# CONFIG_RESET_CONTROLLER is not set +# CONFIG_FMC is not set + +# +# PHY Subsystem +# +# CONFIG_GENERIC_PHY is not set +# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_PXA_28NM_HSIC is not set +# CONFIG_PHY_PXA_28NM_USB2 is not set +# CONFIG_PHY_CPCAP_USB is not set +CONFIG_POWERCAP=y +CONFIG_INTEL_RAPL=m +# CONFIG_IDLE_INJECT is not set +# CONFIG_MCB is not set + +# +# Performance monitor support +# +CONFIG_RAS=y +# CONFIG_RAS_CEC is not set +CONFIG_THUNDERBOLT=y + +# +# Android +# +# CONFIG_ANDROID is not set +CONFIG_LIBNVDIMM=m +CONFIG_BLK_DEV_PMEM=m +CONFIG_ND_BLK=m +CONFIG_ND_CLAIM=y +CONFIG_ND_BTT=m +CONFIG_BTT=y +CONFIG_ND_PFN=m +CONFIG_NVDIMM_PFN=y +CONFIG_NVDIMM_DAX=y +CONFIG_DAX_DRIVER=y +CONFIG_DAX=y +CONFIG_DEV_DAX=m +CONFIG_DEV_DAX_PMEM=m +CONFIG_NVMEM=y + +# +# HW tracing support +# +# CONFIG_STM is not set +# CONFIG_INTEL_TH is not set +# CONFIG_FPGA is not set +# CONFIG_UNISYS_VISORBUS is not set +# CONFIG_SIOX is not set +# CONFIG_UACCE is not set +# CONFIG_SLIMBUS is not set + +# +# File systems +# +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_FS_IOMAP=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +CONFIG_EXT4_FS=m +CONFIG_EXT4_USE_FOR_EXT2=y +CONFIG_EXT4_FS_POSIX_ACL=y +CONFIG_EXT4_FS_SECURITY=y +# CONFIG_EXT4_ENCRYPTION is not set +# CONFIG_EXT4_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_ONLINE_SCRUB is not set +# CONFIG_XFS_WARN is not set +# CONFIG_XFS_DEBUG is not set +CONFIG_GFS2_FS=m +CONFIG_GFS2_FS_LOCKING_DLM=y +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_F2FS_FS is not set +CONFIG_FS_DAX=y +CONFIG_FS_DAX_PMD=y +CONFIG_FS_POSIX_ACL=y +CONFIG_EXPORTFS=y +CONFIG_EXPORTFS_BLOCK_OPS=y +CONFIG_FILE_LOCKING=y +# CONFIG_MANDATORY_FILE_LOCKING is not set +# CONFIG_FS_ENCRYPTION is not set +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY_USER=y +CONFIG_FANOTIFY=y +CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y +CONFIG_QUOTA=y +CONFIG_QUOTA_NETLINK_INTERFACE=y +CONFIG_PRINT_QUOTA_WARNING=y +# CONFIG_QUOTA_DEBUG is not set +CONFIG_QUOTA_TREE=y +# CONFIG_QFMT_V1 is not set +CONFIG_QFMT_V2=y +CONFIG_QUOTACTL=y +CONFIG_QUOTACTL_COMPAT=y +CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS_FS=y +CONFIG_FUSE_FS=m +CONFIG_CUSE=m +CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +# CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW is not set +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set + +# +# Caches +# +CONFIG_FSCACHE=m +CONFIG_FSCACHE_STATS=y +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=m +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=m + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +# CONFIG_FAT_DEFAULT_UTF8 is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +CONFIG_PROC_VMCORE_DEVICE_DUMP=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_PROC_CHILDREN=y +CONFIG_KERNFS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_TMPFS_XATTR=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y +CONFIG_CONFIGFS_FS=y +CONFIG_EFIVAR_FS=y +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ORANGEFS_FS is not set +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_CRAMFS_BLOCKDEV=y +# CONFIG_CRAMFS_MTD is not set +CONFIG_SQUASHFS=m +# CONFIG_SQUASHFS_FILE_CACHE is not set +CONFIG_SQUASHFS_FILE_DIRECT=y +# CONFIG_SQUASHFS_DECOMP_SINGLE is not set +# CONFIG_SQUASHFS_DECOMP_MULTI is not set +CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y +CONFIG_SQUASHFS_XATTR=y +CONFIG_SQUASHFS_ZLIB=y +# CONFIG_SQUASHFS_LZ4 is not set +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +# CONFIG_SQUASHFS_ZSTD is not set +# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX6FS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_PSTORE=y +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +# CONFIG_PSTORE_LZ4HC_COMPRESS is not set +# CONFIG_PSTORE_842_COMPRESS is not set +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" +# CONFIG_PSTORE_CONSOLE is not set +# CONFIG_PSTORE_PMSG is not set +# CONFIG_PSTORE_FTRACE is not set +CONFIG_PSTORE_RAM=m +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +# CONFIG_NFS_V2 is not set +CONFIG_NFS_V3=m +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=m +# CONFIG_NFS_SWAP is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=m +CONFIG_PNFS_BLOCK=m +CONFIG_PNFS_FLEXFILE_LAYOUT=m +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y +CONFIG_NFS_FSCACHE=y +# CONFIG_NFS_USE_LEGACY_DNS is not set +CONFIG_NFS_USE_KERNEL_DNS=y +CONFIG_NFS_DEBUG=y +CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y +CONFIG_NFSD_V3=y +CONFIG_NFSD_V3_ACL=y +CONFIG_NFSD_V4=y +CONFIG_NFSD_PNFS=y +# CONFIG_NFSD_BLOCKLAYOUT is not set +CONFIG_NFSD_SCSILAYOUT=y +# CONFIG_NFSD_FLEXFILELAYOUT is not set +CONFIG_NFSD_V4_SECURITY_LABEL=y +# CONFIG_NFSD_FAULT_INJECTION is not set +CONFIG_GRACE_PERIOD=m +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=m +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_SUNRPC_BACKCHANNEL=y +CONFIG_RPCSEC_GSS_KRB5=m +CONFIG_SUNRPC_DEBUG=y +CONFIG_SUNRPC_XPRT_RDMA=m +CONFIG_CEPH_FS=m +# CONFIG_CEPH_FSCACHE is not set +CONFIG_CEPH_FS_POSIX_ACL=y +CONFIG_CIFS=m +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y +CONFIG_CIFS_WEAK_PW_HASH=y +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_CIFS_ACL=y +CONFIG_CIFS_DEBUG=y +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set +CONFIG_CIFS_DFS_UPCALL=y +# CONFIG_CIFS_SMB_DIRECT is not set +# CONFIG_CIFS_FSCACHE is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_MAC_ROMAN=m +CONFIG_NLS_MAC_CELTIC=m +CONFIG_NLS_MAC_CENTEURO=m +CONFIG_NLS_MAC_CROATIAN=m +CONFIG_NLS_MAC_CYRILLIC=m +CONFIG_NLS_MAC_GAELIC=m +CONFIG_NLS_MAC_GREEK=m +CONFIG_NLS_MAC_ICELAND=m +CONFIG_NLS_MAC_INUIT=m +CONFIG_NLS_MAC_ROMANIAN=m +CONFIG_NLS_MAC_TURKISH=m +CONFIG_NLS_UTF8=m +CONFIG_DLM=m +CONFIG_DLM_DEBUG=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_COMPAT=y +CONFIG_PERSISTENT_KEYRINGS=y +CONFIG_BIG_KEYS=y +CONFIG_TRUSTED_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +# CONFIG_KEY_DH_OPERATIONS is not set +# CONFIG_SECURITY_DMESG_RESTRICT is not set +CONFIG_SECURITY=y +CONFIG_SECURITY_WRITABLE_HOOKS=y +CONFIG_SECURITYFS=y +CONFIG_SECURITY_NETWORK=y +CONFIG_PAGE_TABLE_ISOLATION=y +CONFIG_SECURITY_INFINIBAND=y +CONFIG_SECURITY_NETWORK_XFRM=y +# CONFIG_SECURITY_PATH is not set +CONFIG_INTEL_TXT=y +CONFIG_LSM_MMAP_MIN_ADDR=65535 +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_HARDENED_USERCOPY_FALLBACK=y +CONFIG_FORTIFY_SOURCE=y +# CONFIG_STATIC_USERMODEHELPER is not set +CONFIG_SECURITY_SELINUX=y +CONFIG_SECURITY_SELINUX_BOOTPARAM=y +CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 +CONFIG_SECURITY_SELINUX_DISABLE=y +CONFIG_SECURITY_SELINUX_DEVELOP=y +CONFIG_SECURITY_SELINUX_AVC_STATS=y +CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 +# CONFIG_SECURITY_SMACK is not set +# CONFIG_SECURITY_TOMOYO is not set +# CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set +CONFIG_SECURITY_YAMA=y +CONFIG_INTEGRITY=y +CONFIG_INTEGRITY_SIGNATURE=y +CONFIG_INTEGRITY_ASYMMETRIC_KEYS=y +CONFIG_INTEGRITY_TRUSTED_KEYRING=y +CONFIG_INTEGRITY_AUDIT=y +CONFIG_IMA=y +CONFIG_IMA_MEASURE_PCR_IDX=10 +CONFIG_IMA_LSM_RULES=y +# CONFIG_IMA_TEMPLATE is not set +CONFIG_IMA_NG_TEMPLATE=y +# CONFIG_IMA_SIG_TEMPLATE is not set +CONFIG_IMA_DEFAULT_TEMPLATE="ima-ng" +CONFIG_IMA_DEFAULT_HASH_SHA1=y +# CONFIG_IMA_DEFAULT_HASH_SHA256 is not set +CONFIG_IMA_DEFAULT_HASH="sha1" +# CONFIG_IMA_WRITE_POLICY is not set +# CONFIG_IMA_READ_POLICY is not set +CONFIG_IMA_APPRAISE=y +# CONFIG_IMA_APPRAISE_BUILD_POLICY is not set +CONFIG_IMA_APPRAISE_BOOTPARAM=y +CONFIG_IMA_TRUSTED_KEYRING=y +# CONFIG_IMA_BLACKLIST_KEYRING is not set +# CONFIG_IMA_LOAD_X509 is not set +CONFIG_EVM=y +CONFIG_EVM_ATTR_FSUUID=y +# CONFIG_EVM_ADD_XATTRS is not set +# CONFIG_EVM_LOAD_X509 is not set +CONFIG_DEFAULT_SECURITY_SELINUX=y +# CONFIG_DEFAULT_SECURITY_DAC is not set +CONFIG_DEFAULT_SECURITY="selinux" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_FIPS=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_RNG_DEFAULT=y +CONFIG_CRYPTO_AKCIPHER2=y +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=m +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_RSA=y +CONFIG_CRYPTO_DH=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_USER=m +# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set +CONFIG_CRYPTO_GF128MUL=y +CONFIG_CRYPTO_NULL=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_PCRYPT=m +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_GLUE_HELPER_X86=y + +# +# Authenticated Encryption with Associated Data +# +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=m +# CONFIG_CRYPTO_AEGIS128 is not set +# CONFIG_CRYPTO_AEGIS128L is not set +# CONFIG_CRYPTO_AEGIS256 is not set +# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS128L_AESNI_SSE2 is not set +# CONFIG_CRYPTO_AEGIS256_AESNI_SSE2 is not set +# CONFIG_CRYPTO_MORUS640 is not set +# CONFIG_CRYPTO_MORUS640_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280 is not set +# CONFIG_CRYPTO_MORUS1280_SSE2 is not set +# CONFIG_CRYPTO_MORUS1280_AVX2 is not set +CONFIG_CRYPTO_SEQIV=y +CONFIG_CRYPTO_ECHAINIV=m + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CFB=y +CONFIG_CRYPTO_CTR=y +CONFIG_CRYPTO_CTS=m +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m +# CONFIG_CRYPTO_KEYWRAP is not set + +# +# Hash modes +# +CONFIG_CRYPTO_CMAC=m +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_XCBC=m +CONFIG_CRYPTO_VMAC=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=y +CONFIG_CRYPTO_CRC32C_INTEL=m +CONFIG_CRYPTO_CRC32=m +CONFIG_CRYPTO_CRC32_PCLMUL=m +CONFIG_CRYPTO_CRCT10DIF=y +CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m +CONFIG_CRYPTO_GHASH=y +CONFIG_CRYPTO_POLY1305=m +CONFIG_CRYPTO_POLY1305_X86_64=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_SSSE3=y +CONFIG_CRYPTO_SHA256_SSSE3=y +CONFIG_CRYPTO_SHA512_SSSE3=m +CONFIG_CRYPTO_SHA256=y +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_SHA3=m +# CONFIG_CRYPTO_SM3 is not set +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m +CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m + +# +# Ciphers +# +CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_AES_TI is not set +CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_NI_INTEL=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_BLOWFISH_COMMON=m +CONFIG_CRYPTO_BLOWFISH_X86_64=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAMELLIA_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64=m +CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64=m +CONFIG_CRYPTO_CAST_COMMON=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST5_AVX_X86_64=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_CAST6_AVX_X86_64=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_DES3_EDE_X86_64=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_CHACHA20=m +CONFIG_CRYPTO_CHACHA20_X86_64=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_SERPENT_SSE2_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX_X86_64=m +CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m +# CONFIG_CRYPTO_SM4 is not set +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m +CONFIG_CRYPTO_TWOFISH_X86_64=m +CONFIG_CRYPTO_TWOFISH_X86_64_3WAY=m +CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_842 is not set +# CONFIG_CRYPTO_LZ4 is not set +# CONFIG_CRYPTO_LZ4HC is not set +# CONFIG_CRYPTO_ZSTD is not set + +# +# Random Number Generation +# +CONFIG_CRYPTO_ANSI_CPRNG=m +CONFIG_CRYPTO_DRBG_MENU=y +CONFIG_CRYPTO_DRBG_HMAC=y +CONFIG_CRYPTO_DRBG_HASH=y +CONFIG_CRYPTO_DRBG_CTR=y +CONFIG_CRYPTO_DRBG=y +CONFIG_CRYPTO_JITTERENTROPY=y +CONFIG_CRYPTO_USER_API=y +CONFIG_CRYPTO_USER_API_HASH=y +CONFIG_CRYPTO_USER_API_SKCIPHER=y +CONFIG_CRYPTO_USER_API_RNG=y +CONFIG_CRYPTO_USER_API_AEAD=y +CONFIG_CRYPTO_HASH_INFO=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_DEV_PADLOCK=m +CONFIG_CRYPTO_DEV_PADLOCK_AES=m +CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +CONFIG_CRYPTO_DEV_CCP=y +CONFIG_CRYPTO_DEV_CCP_DD=m +CONFIG_CRYPTO_DEV_SP_CCP=y +CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +CONFIG_CRYPTO_DEV_SP_PSP=y +CONFIG_CRYPTO_DEV_QAT=m +CONFIG_CRYPTO_DEV_QAT_DH895xCC=m +CONFIG_CRYPTO_DEV_QAT_C3XXX=m +CONFIG_CRYPTO_DEV_QAT_C62X=m +CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m +CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m +CONFIG_CRYPTO_DEV_QAT_C62XVF=m +CONFIG_CRYPTO_DEV_NITROX=m +CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m +CONFIG_CRYPTO_DEV_CHELSIO=m +CONFIG_CHELSIO_IPSEC_INLINE=y +# CONFIG_CRYPTO_DEV_CHELSIO_TLS is not set +# CONFIG_CRYPTO_DEV_VIRTIO is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +CONFIG_SIGNED_PE_FILE_VERIFICATION=y + +# +# Certificates for signature checking +# +CONFIG_MODULE_SIG_KEY="certs/signing_key.pem" +CONFIG_SYSTEM_TRUSTED_KEYRING=y +CONFIG_SYSTEM_TRUSTED_KEYS="" +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +# CONFIG_SECONDARY_TRUSTED_KEYRING is not set +CONFIG_SYSTEM_BLACKLIST_KEYRING=y +CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" +CONFIG_BINARY_PRINTF=y + +# +# Library routines +# +CONFIG_RAID6_PQ=m +CONFIG_BITREVERSE=y +CONFIG_RATIONAL=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_IOMAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_T10DIF=y +CONFIG_CRC_ITU_T=m +CONFIG_CRC32=y +# CONFIG_CRC32_SELFTEST is not set +CONFIG_CRC32_SLICEBY8=y +# CONFIG_CRC32_SLICEBY4 is not set +# CONFIG_CRC32_SARWATE is not set +# CONFIG_CRC32_BIT is not set +# CONFIG_CRC64 is not set +# CONFIG_CRC4 is not set +CONFIG_CRC7=m +CONFIG_LIBCRC32C=m +CONFIG_CRC8=m +CONFIG_XXHASH=y +# CONFIG_RANDOM32_SELFTEST is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_LZ4_DECOMPRESS=y +CONFIG_XZ_DEC=y +CONFIG_XZ_DEC_X86=y +CONFIG_XZ_DEC_POWERPC=y +CONFIG_XZ_DEC_IA64=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_ARMTHUMB=y +CONFIG_XZ_DEC_SPARC=y +CONFIG_XZ_DEC_BCJ=y +# CONFIG_XZ_DEC_TEST is not set +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_XZ=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_DECOMPRESS_LZ4=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_REED_SOLOMON=m +CONFIG_REED_SOLOMON_ENC8=y +CONFIG_REED_SOLOMON_DEC8=y +CONFIG_TEXTSEARCH=y +CONFIG_TEXTSEARCH_KMP=m +CONFIG_TEXTSEARCH_BM=m +CONFIG_TEXTSEARCH_FSM=m +CONFIG_BTREE=y +CONFIG_INTERVAL_TREE=y +CONFIG_RADIX_TREE_MULTIORDER=y +CONFIG_ASSOCIATIVE_ARRAY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAS_DMA=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_DMA_DIRECT_OPS=y +CONFIG_DMA_VIRT_OPS=y +CONFIG_SWIOTLB=y +CONFIG_SGL_ALLOC=y +CONFIG_CHECK_SIGNATURE=y +CONFIG_CPUMASK_OFFSTACK=y +CONFIG_CPU_RMAP=y +CONFIG_DQL=y +CONFIG_GLOB=y +# CONFIG_GLOB_SELFTEST is not set +CONFIG_NLATTR=y +CONFIG_CLZ_TAB=y +CONFIG_CORDIC=m +# CONFIG_DDR is not set +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_SIGNATURE=y +CONFIG_OID_REGISTRY=y +CONFIG_UCS2_STRING=y +CONFIG_FONT_SUPPORT=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_SG_POOL=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_PMEM_API=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_ARCH_HAS_UACCESS_MCSAFE=y +CONFIG_SBITMAP=y +CONFIG_PARMAN=m +# CONFIG_STRING_SELFTEST is not set + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_DYNAMIC_DEBUG=y + +# +# Compile-time checks and compiler options +# +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO_REDUCED is not set +# CONFIG_DEBUG_INFO_SPLIT is not set +CONFIG_DEBUG_INFO_DWARF4=y +# CONFIG_GDB_SCRIPTS is not set +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_PAGE_OWNER is not set +CONFIG_DEBUG_FS=y +CONFIG_HEADERS_CHECK=y +CONFIG_DEBUG_SECTION_MISMATCH=y +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +CONFIG_STACK_VALIDATION=y +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_DEBUG_KERNEL=y + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_PAGE_REF is not set +# CONFIG_DEBUG_RODATA_TEST is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_VM is not set +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_ARCH_KASAN=y +# CONFIG_KASAN is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_DEBUG_SHIRQ=y + +# +# Debug Lockups and Hangs +# +CONFIG_LOCKUP_DETECTOR=y +CONFIG_SOFTLOCKUP_DETECTOR=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y +CONFIG_HARDLOCKUP_DETECTOR=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC=y +CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=1 +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 +# CONFIG_WQ_WATCHDOG is not set +CONFIG_PANIC_ON_OOPS=y +CONFIG_PANIC_ON_OOPS_VALUE=1 +CONFIG_PANIC_TIMEOUT=0 +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_INFO=y +CONFIG_SCHEDSTATS=y +# CONFIG_SCHED_STACK_END_CHECK is not set +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +CONFIG_STACKTRACE=y +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_PI_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_RCU_PERF_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +CONFIG_FUNCTION_ERROR_INJECTION=y +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_FENTRY=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACER_MAX_TRACE=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_PREEMPTIRQ_EVENTS is not set +# CONFIG_IRQSOFF_TRACER is not set +CONFIG_SCHED_TRACER=y +CONFIG_HWLAT_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_TRACER_SNAPSHOT=y +# CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +CONFIG_STACK_TRACER=y +CONFIG_BLK_DEV_IO_TRACE=y +CONFIG_KPROBE_EVENTS=y +# CONFIG_KPROBE_EVENTS_ON_NOTRACE is not set +CONFIG_UPROBE_EVENTS=y +CONFIG_BPF_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_FUNCTION_PROFILER=y +# CONFIG_BPF_KPROBE_OVERRIDE is not set +CONFIG_FTRACE_MCOUNT_RECORD=y +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_MMIOTRACE is not set +CONFIG_TRACING_MAP=y +CONFIG_HIST_TRIGGERS=y +# CONFIG_TRACEPOINT_BENCHMARK is not set +CONFIG_RING_BUFFER_BENCHMARK=m +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_TRACE_EVAL_MAP_FILE is not set +# CONFIG_TRACING_EVENTS_GPIO is not set +CONFIG_PROVIDE_OHCI1394_DMA_INIT=y +# CONFIG_DMA_API_DEBUG is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_SORT is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m +# CONFIG_TEST_HEXDUMP is not set +# CONFIG_TEST_STRING_HELPERS is not set +CONFIG_TEST_KSTRTOX=y +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_BITFIELD is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_PARMAN is not set +# CONFIG_TEST_LKM is not set +# CONFIG_TEST_USER_COPY is not set +# CONFIG_TEST_BPF is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +# CONFIG_TEST_FIRMWARE is not set +# CONFIG_TEST_SYSCTL is not set +# CONFIG_TEST_UDELAY is not set +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_MEMTEST is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_KGDB=y +CONFIG_KGDB_SERIAL_CONSOLE=y +CONFIG_KGDB_TESTS=y +# CONFIG_KGDB_TESTS_ON_BOOT is not set +CONFIG_KGDB_LOW_LEVEL_TRAP=y +CONFIG_KGDB_KDB=y +CONFIG_KDB_DEFAULT_ENABLE=0x0 +CONFIG_KDB_KEYBOARD=y +CONFIG_KDB_CONTINUE_CATASTROPHIC=0 +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_EARLY_PRINTK_USB=y +# CONFIG_X86_VERBOSE_BOOTUP is not set +CONFIG_EARLY_PRINTK=y +CONFIG_EARLY_PRINTK_DBGP=y +CONFIG_EARLY_PRINTK_EFI=y +CONFIG_EARLY_PRINTK_USB_XDBC=y +# CONFIG_X86_PTDUMP is not set +# CONFIG_EFI_PGT_DUMP is not set +# CONFIG_DEBUG_WX is not set +CONFIG_DOUBLEFAULT=y +# CONFIG_DEBUG_TLBFLUSH is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +CONFIG_X86_DECODER_SELFTEST=y +CONFIG_IO_DELAY_TYPE_0X80=0 +CONFIG_IO_DELAY_TYPE_0XED=1 +CONFIG_IO_DELAY_TYPE_UDELAY=2 +CONFIG_IO_DELAY_TYPE_NONE=3 +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +CONFIG_DEFAULT_IO_DELAY_TYPE=0 +CONFIG_DEBUG_BOOT_PARAMS=y +# CONFIG_CPA_DEBUG is not set +CONFIG_OPTIMIZE_INLINING=y +# CONFIG_DEBUG_ENTRY is not set +# CONFIG_DEBUG_NMI_SELFTEST is not set +# CONFIG_X86_DEBUG_FPU is not set +# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNWINDER_ORC=y +# CONFIG_UNWINDER_FRAME_POINTER is not set -- 1.8.3

1 0