- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 0/2] fix CVE-2025-68768
by Li Xiasong 04 Feb '26

04 Feb '26

*** BLURB HERE *** Jakub Kicinski (2): inet: frags: add inet_frag_queue_flush() inet: frags: flush pending skbs in fqdir_pre_exit() include/net/inet_frag.h | 18 +++----------- include/net/ipv6_frag.h | 9 ++++--- net/ipv4/inet_fragment.c | 51 +++++++++++++++++++++++++++++++++++++--- net/ipv4/ip_fragment.c | 18 +++++++------- 4 files changed, 65 insertions(+), 31 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6] ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv()
by Li Xiasong 04 Feb '26

04 Feb '26

From: Eric Dumazet <edumazet(a)google.com> mainline inclusion from mainline-v6.19-rc6 commit 81c734dae203757fb3c9eee6f9896386940776bd category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13513 CVE: CVE-2026-23003 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Blamed commit did not take care of VLAN encapsulations as spotted by syzbot [1]. Use skb_vlan_inet_prepare() instead of pskb_inet_may_pull(). [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7a8/0x1fa0 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x16f/0x1b0 net/ipv6/ip6_tunnel.c:729 __ip6_tnl_rcv+0xed9/0x1b50 net/ipv6/ip6_tunnel.c:860 ip6_tnl_rcv+0xc3/0x100 net/ipv6/ip6_tunnel.c:903 gre_rcv+0x1529/0x1b90 net/ipv6/ip6_gre.c:-1 ip6_protocol_deliver_rcu+0x1c89/0x2c60 net/ipv6/ip6_input.c:438 ip6_input_finish+0x1f4/0x4a0 net/ipv6/ip6_input.c:489 NF_HOOK include/linux/netfilter.h:318 [inline] ip6_input+0x9c/0x330 net/ipv6/ip6_input.c:500 ip6_mc_input+0x7ca/0xc10 net/ipv6/ip6_input.c:590 dst_input include/net/dst.h:474 [inline] ip6_rcv_finish+0x958/0x990 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:318 [inline] ipv6_rcv+0xf1/0x3c0 net/ipv6/ip6_input.c:311 __netif_receive_skb_one_core net/core/dev.c:6139 [inline] __netif_receive_skb+0x1df/0xac0 net/core/dev.c:6252 netif_receive_skb_internal net/core/dev.c:6338 [inline] netif_receive_skb+0x57/0x630 net/core/dev.c:6397 tun_rx_batched+0x1df/0x980 drivers/net/tun.c:1485 tun_get_user+0x5c0e/0x6c60 drivers/net/tun.c:1953 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:4960 [inline] slab_alloc_node mm/slub.c:5263 [inline] kmem_cache_alloc_node_noprof+0x9e7/0x17a0 mm/slub.c:5315 kmalloc_reserve+0x13c/0x4b0 net/core/skbuff.c:586 __alloc_skb+0x805/0x1040 net/core/skbuff.c:690 alloc_skb include/linux/skbuff.h:1383 [inline] alloc_skb_with_frags+0xc5/0xa60 net/core/skbuff.c:6712 sock_alloc_send_pskb+0xacc/0xc60 net/core/sock.c:2995 tun_alloc_skb drivers/net/tun.c:1461 [inline] tun_get_user+0x1142/0x6c60 drivers/net/tun.c:1794 tun_chr_write_iter+0x3e9/0x5c0 drivers/net/tun.c:1999 new_sync_write fs/read_write.c:593 [inline] vfs_write+0xbe2/0x15d0 fs/read_write.c:686 ksys_write fs/read_write.c:738 [inline] __do_sys_write fs/read_write.c:749 [inline] __se_sys_write fs/read_write.c:746 [inline] __x64_sys_write+0x1fb/0x4d0 fs/read_write.c:746 x64_sys_call+0x30ab/0x3e70 arch/x86/include/generated/asm/syscalls_64.h:2 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xd3/0xf80 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 6465 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(none) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025 Fixes: 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") Reported-by: syzbot+d4dda070f833dc5dc89a(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695e88b2.050a0220.1c677c.036d.GAE@google.com… Signed-off-by: Eric Dumazet <edumazet(a)google.com> Link: https://patch.msgid.link/20260107163109.4188620-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Conflicts: net/ipv6/ip6_tunnel.c [conflicts due to not merge 9990ddf47d41 ("net: tunnel: make skb_vlan_inet_prepare() return drop reasons").] Signed-off-by: Li Xiasong <lixiasong1(a)huawei.com> --- net/ipv6/ip6_tunnel.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index c70ff45649ad..8348b7e43c13 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -844,7 +844,7 @@ static int __ip6_tnl_rcv(struct ip6_tnl *tunnel, struct sk_buff *skb, skb_reset_network_header(skb); - if (!pskb_inet_may_pull(skb)) { + if (!skb_vlan_inet_prepare(skb, true)) { DEV_STATS_INC(tunnel->dev, rx_length_errors); DEV_STATS_INC(tunnel->dev, rx_errors); goto drop; -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS 0/5] CVE-2026-23003
by Li Xiasong 04 Feb '26

04 Feb '26

*** BLURB HERE *** Eric Dumazet (2): geneve: fix header validation in geneve[6]_xmit_skb ip6_tunnel: use skb_vlan_inet_prepare() in __ip6_tnl_rcv() Gal Pressman (1): geneve: Fix incorrect inner network header offset when innerprotoinherit is set Phillip Potter (2): net: geneve: check skb is large enough for IPv4/IPv6 header net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb drivers/net/geneve.c | 6 ++++++ include/net/ip_tunnels.h | 34 ++++++++++++++++++++++++++++++++++ net/ipv6/ip6_tunnel.c | 2 +- 3 files changed, 41 insertions(+), 1 deletion(-) -- 2.34.1

2 6

[PATCH OLK-6.6] media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg()
by Liu Kai 04 Feb '26

04 Feb '26

From: Jeongjun Park <aha310510(a)gmail.com> stable inclusion from stable-v6.6.120 commit 4a54d8fcb093761e4c56eb211cf4e39bf8401fa1 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13371 CVE: CVE-2025-68819 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b91e6aafe8d356086cc621bc03e35ba2299e4788 upstream. rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln. Fixes: 60688d5e6e6e ("V4L/DVB (8735): dtv5100: replace dummy frontend by zl10353") Cc: stable(a)vger.kernel.org Signed-off-by: Jeongjun Park <aha310510(a)gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- drivers/media/usb/dvb-usb/dtv5100.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c index 56c9d521a34a..ee8a76fb5cc1 100644 --- a/drivers/media/usb/dvb-usb/dtv5100.c +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -55,6 +55,11 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, } index = (addr << 8) + wbuf[0]; + if (rlen > sizeof(st->data)) { + warn("rlen = %x is too big!\n", rlen); + return -EINVAL; + } + memcpy(st->data, rbuf, rlen); msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, pipe, request, -- 2.34.1

2 1

[PATCH OLK-6.6] RDMA/cm: Fix leaking the multicast GID table reference
by Liu Kai 04 Feb '26

04 Feb '26

From: Jason Gunthorpe <jgg(a)nvidia.com> stable inclusion from stable-v6.6.120 commit c0acdee513239e1d6e1b490f56be0e6837dfd162 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13395 CVE: CVE-2025-71084 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 57f3cb6c84159d12ba343574df2115fb18dd83ca upstream. If the CM ID is destroyed while the CM event for multicast creating is still queued the cancel_work_sync() will prevent the work from running which also prevents destroying the ah_attr. This leaks a refcount and triggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886 Destroy the ah_attr after canceling the work, it is safe to call this twice. Link: https://patch.msgid.link/r/0-v1-4285d070a6b2+20a-rdma_mc_gid_leak_syz_jgg@n… Cc: stable(a)vger.kernel.org Fixes: fe454dc31e84 ("RDMA/ucma: Fix use-after-free bug in ucma_create_uevent") Reported-by: syzbot+b0da83a6c0e2e2bddbd4(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68232e7b.050a0220.f2294.09f6.GAE@google.com Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- drivers/infiniband/core/cma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index a5ceae2e075a..7db79ff3fa06 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1993,6 +1993,7 @@ static void destroy_mc(struct rdma_id_private *id_priv, ib_sa_free_multicast(mc->sa_mc); if (rdma_protocol_roce(id_priv->id.device, id_priv->id.port_num)) { + struct rdma_cm_event *event = &mc->iboe_join.event; struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr; struct net_device *ndev = NULL; @@ -2015,6 +2016,8 @@ static void destroy_mc(struct rdma_id_private *id_priv, dev_put(ndev); cancel_work_sync(&mc->iboe_join.work); + if (event->event == RDMA_CM_EVENT_MULTICAST_JOIN) + rdma_destroy_ah_attr(&event->param.ud.ah_attr); } kfree(mc); } -- 2.34.1

2 1

[PATCH OLK-5.10] RDMA/cm: Fix leaking the multicast GID table reference
by Liu Kai 04 Feb '26

04 Feb '26

From: Jason Gunthorpe <jgg(a)nvidia.com> stable inclusion from stable-v5.10.248 commit d5ce588a9552878859a4d44b70b724216c188a5f category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13395 CVE: CVE-2025-71084 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 57f3cb6c84159d12ba343574df2115fb18dd83ca upstream. If the CM ID is destroyed while the CM event for multicast creating is still queued the cancel_work_sync() will prevent the work from running which also prevents destroying the ah_attr. This leaks a refcount and triggers a WARN: GID entry ref leak for dev syz1 index 2 ref=573 WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 release_gid_table drivers/infiniband/core/cache.c:806 [inline] WARNING: CPU: 1 PID: 655 at drivers/infiniband/core/cache.c:809 gid_table_release_one+0x284/0x3cc drivers/infiniband/core/cache.c:886 Destroy the ah_attr after canceling the work, it is safe to call this twice. Link: https://patch.msgid.link/r/0-v1-4285d070a6b2+20a-rdma_mc_gid_leak_syz_jgg@n… Cc: stable(a)vger.kernel.org Fixes: fe454dc31e84 ("RDMA/ucma: Fix use-after-free bug in ucma_create_uevent") Reported-by: syzbot+b0da83a6c0e2e2bddbd4(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/68232e7b.050a0220.f2294.09f6.GAE@google.com Signed-off-by: Jason Gunthorpe <jgg(a)nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- drivers/infiniband/core/cma.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/infiniband/core/cma.c b/drivers/infiniband/core/cma.c index a203ee7b053b..483a37f9fa12 100644 --- a/drivers/infiniband/core/cma.c +++ b/drivers/infiniband/core/cma.c @@ -1841,6 +1841,7 @@ static void destroy_mc(struct rdma_id_private *id_priv, ib_sa_free_multicast(mc->sa_mc); if (rdma_protocol_roce(id_priv->id.device, id_priv->id.port_num)) { + struct rdma_cm_event *event = &mc->iboe_join.event; struct rdma_dev_addr *dev_addr = &id_priv->id.route.addr.dev_addr; struct net_device *ndev = NULL; @@ -1863,6 +1864,8 @@ static void destroy_mc(struct rdma_id_private *id_priv, dev_put(ndev); cancel_work_sync(&mc->iboe_join.work); + if (event->event == RDMA_CM_EVENT_MULTICAST_JOIN) + rdma_destroy_ah_attr(&event->param.ud.ah_attr); } kfree(mc); } -- 2.34.1

2 1

[PATCH OLK-5.10] media: dvb-usb: dtv5100: fix out-of-bounds in dtv5100_i2c_msg()
by Liu Kai 04 Feb '26

04 Feb '26

From: Jeongjun Park <aha310510(a)gmail.com> stable inclusion from stable-v5.10.248 commit c2c293ea7b61f12cdaad1e99a5b4efc58c88960a category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13371 CVE: CVE-2025-68819 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b91e6aafe8d356086cc621bc03e35ba2299e4788 upstream. rlen value is a user-controlled value, but dtv5100_i2c_msg() does not check the size of the rlen value. Therefore, if it is set to a value larger than sizeof(st->data), an out-of-bounds vuln occurs for st->data. Therefore, we need to add proper range checking to prevent this vuln. Fixes: 60688d5e6e6e ("V4L/DVB (8735): dtv5100: replace dummy frontend by zl10353") Cc: stable(a)vger.kernel.org Signed-off-by: Jeongjun Park <aha310510(a)gmail.com> Signed-off-by: Hans Verkuil <hverkuil+cisco(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- drivers/media/usb/dvb-usb/dtv5100.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/usb/dvb-usb/dtv5100.c b/drivers/media/usb/dvb-usb/dtv5100.c index 1c13e493322c..89b3a5a790d8 100644 --- a/drivers/media/usb/dvb-usb/dtv5100.c +++ b/drivers/media/usb/dvb-usb/dtv5100.c @@ -55,6 +55,11 @@ static int dtv5100_i2c_msg(struct dvb_usb_device *d, u8 addr, } index = (addr << 8) + wbuf[0]; + if (rlen > sizeof(st->data)) { + warn("rlen = %x is too big!\n", rlen); + return -EINVAL; + } + memcpy(st->data, rbuf, rlen); msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, pipe, request, -- 2.34.1

2 1

[PATCH OLK-6.6 0/4] fix cve-2025-40300
by Bowen You 04 Feb '26

04 Feb '26

*** BLURB HERE *** Bowen You (1): config: enable CONFIG_MITIGATION_VMESCAPE by default on x86 Pawan Gupta (3): x86/vmscape: Add conditional IBPB mitigation x86/vmscape: Enumerate VMSCAPE bug x86/vmscape: Enable the mitigation .../ABI/testing/sysfs-devices-system-cpu | 1 + .../admin-guide/kernel-parameters.txt | 11 +++ arch/x86/Kconfig | 9 ++ arch/x86/configs/openeuler_defconfig | 1 + arch/x86/include/asm/cpufeatures.h | 2 + arch/x86/include/asm/entry-common.h | 7 ++ arch/x86/include/asm/nospec-branch.h | 2 + arch/x86/kernel/cpu/bugs.c | 85 +++++++++++++++++++ arch/x86/kernel/cpu/common.c | 58 +++++++++---- arch/x86/kvm/x86.c | 9 ++ drivers/base/cpu.c | 3 + 11 files changed, 170 insertions(+), 18 deletions(-) -- 2.34.1

2 5

[PATCH OLK-6.6 0/4] fix cve-2025-40300
by Bowen You 04 Feb '26

04 Feb '26

*** BLURB HERE *** Bowen You (1): config: enable CONFIG_MITIGATION_VMESCAPE by default on x86 Pawan Gupta (3): x86/vmscape: Add conditional IBPB mitigation x86/vmscape: Enumerate VMSCAPE bug x86/vmscape: Enable the mitigation .../ABI/testing/sysfs-devices-system-cpu | 1 + .../admin-guide/kernel-parameters.txt | 11 +++ arch/x86/Kconfig | 9 ++ arch/x86/configs/openeuler_defconfig | 1 + arch/x86/include/asm/cpufeatures.h | 2 + arch/x86/include/asm/entry-common.h | 7 ++ arch/x86/include/asm/nospec-branch.h | 2 + arch/x86/kernel/cpu/bugs.c | 85 +++++++++++++++++++ arch/x86/kernel/cpu/common.c | 58 +++++++++---- arch/x86/kvm/x86.c | 9 ++ drivers/base/cpu.c | 3 + 11 files changed, 170 insertions(+), 18 deletions(-) -- 2.34.1

2 5

[PATCH OLK-6.6 0/4] fix cve-2025-40300
by Bowen You 04 Feb '26

04 Feb '26

*** BLURB HERE *** Bowen You (1): config: enable CONFIG_MITIGATION_VMESCAPE by default on x86 Pawan Gupta (3): x86/vmscape: Add conditional IBPB mitigation x86/vmscape: Enumerate VMSCAPE bug x86/vmscape: Enable the mitigation .../ABI/testing/sysfs-devices-system-cpu | 1 + .../admin-guide/kernel-parameters.txt | 11 +++ arch/x86/Kconfig | 9 ++ arch/x86/configs/openeuler_defconfig | 1 + arch/x86/include/asm/cpufeatures.h | 2 + arch/x86/include/asm/entry-common.h | 7 ++ arch/x86/include/asm/nospec-branch.h | 2 + arch/x86/kernel/cpu/bugs.c | 85 +++++++++++++++++++ arch/x86/kernel/cpu/common.c | 58 +++++++++---- arch/x86/kvm/x86.c | 9 ++ drivers/base/cpu.c | 3 + 11 files changed, 170 insertions(+), 18 deletions(-) -- 2.34.1

2 9

[PATCH OLK-6.6 0/2] CVE-2024-35808
by linan666＠huaweicloud.com 04 Feb '26

04 Feb '26

From: Li Nan <linan122(a)huawei.com> Li Nan (1): md/dm-raid: don't clear MD_RECOVERY_FROZEN after setting frozen Yu Kuai (1): md/dm-raid: don't call md_reap_sync_thread() directly drivers/md/dm-raid.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) -- 2.39.2

2 3

[PATCH OLK-5.10] crypto: lzo - Fix compression buffer overrun
by Zhao Yipeng 04 Feb '26

04 Feb '26

From: Herbert Xu <herbert(a)gondor.apana.org.au> mainline inclusion from mainline-v6.15-rc1 commit cc47f07234f72cbd8e2c973cdbf2a6730660a463 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/9780 CVE: CVE-2025-38068 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Unlike the decompression code, the compression code in LZO never checked for output overruns. It instead assumes that the caller always provides enough buffer space, disregarding the buffer length provided by the caller. Add a safe compression interface that checks for the end of buffer before each write. Use the safe interface in crypto/lzo. Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Conflicts: lib/lzo/lzo1x_compress.c [The context conflict is due to the mainline commit 33fb626be08f3 and a10c9ede9913f not being merged.] Signed-off-by: Zhao Yipeng <zhaoyipeng5(a)huawei.com> --- crypto/lzo-rle.c | 2 +- crypto/lzo.c | 2 +- include/linux/lzo.h | 8 +++ lib/lzo/Makefile | 2 +- lib/lzo/lzo1x_compress.c | 102 +++++++++++++++++++++++++--------- lib/lzo/lzo1x_compress_safe.c | 18 ++++++ 6 files changed, 106 insertions(+), 28 deletions(-) create mode 100644 lib/lzo/lzo1x_compress_safe.c diff --git a/crypto/lzo-rle.c b/crypto/lzo-rle.c index 0631d975bfac..0abc2d87f042 100644 --- a/crypto/lzo-rle.c +++ b/crypto/lzo-rle.c @@ -55,7 +55,7 @@ static int __lzorle_compress(const u8 *src, unsigned int slen, size_t tmp_len = *dlen; /* size_t(ulong) <-> uint on 64 bit */ int err; - err = lzorle1x_1_compress(src, slen, dst, &tmp_len, ctx); + err = lzorle1x_1_compress_safe(src, slen, dst, &tmp_len, ctx); if (err != LZO_E_OK) return -EINVAL; diff --git a/crypto/lzo.c b/crypto/lzo.c index ebda132dd22b..8338851c7406 100644 --- a/crypto/lzo.c +++ b/crypto/lzo.c @@ -55,7 +55,7 @@ static int __lzo_compress(const u8 *src, unsigned int slen, size_t tmp_len = *dlen; /* size_t(ulong) <-> uint on 64 bit */ int err; - err = lzo1x_1_compress(src, slen, dst, &tmp_len, ctx); + err = lzo1x_1_compress_safe(src, slen, dst, &tmp_len, ctx); if (err != LZO_E_OK) return -EINVAL; diff --git a/include/linux/lzo.h b/include/linux/lzo.h index e95c7d1092b2..4d30e3624acd 100644 --- a/include/linux/lzo.h +++ b/include/linux/lzo.h @@ -24,10 +24,18 @@ int lzo1x_1_compress(const unsigned char *src, size_t src_len, unsigned char *dst, size_t *dst_len, void *wrkmem); +/* Same as above but does not write more than dst_len to dst. */ +int lzo1x_1_compress_safe(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len, void *wrkmem); + /* This requires 'wrkmem' of size LZO1X_1_MEM_COMPRESS */ int lzorle1x_1_compress(const unsigned char *src, size_t src_len, unsigned char *dst, size_t *dst_len, void *wrkmem); +/* Same as above but does not write more than dst_len to dst. */ +int lzorle1x_1_compress_safe(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len, void *wrkmem); + /* safe decompression with overrun testing */ int lzo1x_decompress_safe(const unsigned char *src, size_t src_len, unsigned char *dst, size_t *dst_len); diff --git a/lib/lzo/Makefile b/lib/lzo/Makefile index 2f58fafbbddd..fc7b2b7ef4b2 100644 --- a/lib/lzo/Makefile +++ b/lib/lzo/Makefile @@ -1,5 +1,5 @@ # SPDX-License-Identifier: GPL-2.0-only -lzo_compress-objs := lzo1x_compress.o +lzo_compress-objs := lzo1x_compress.o lzo1x_compress_safe.o lzo_decompress-objs := lzo1x_decompress_safe.o obj-$(CONFIG_LZO_COMPRESS) += lzo_compress.o diff --git a/lib/lzo/lzo1x_compress.c b/lib/lzo/lzo1x_compress.c index 8ad5ba2b86e2..469c143f7585 100644 --- a/lib/lzo/lzo1x_compress.c +++ b/lib/lzo/lzo1x_compress.c @@ -18,11 +18,22 @@ #include <linux/lzo.h> #include "lzodefs.h" -static noinline size_t -lzo1x_1_do_compress(const unsigned char *in, size_t in_len, - unsigned char *out, size_t *out_len, - size_t ti, void *wrkmem, signed char *state_offset, - const unsigned char bitstream_version) +#undef LZO_UNSAFE + +#ifndef LZO_SAFE +#define LZO_UNSAFE 1 +#define LZO_SAFE(name) name +#define HAVE_OP(x) 1 +#endif + +#define NEED_OP(x) if (!HAVE_OP(x)) goto output_overrun + +static noinline int +LZO_SAFE(lzo1x_1_do_compress)(const unsigned char *in, size_t in_len, + unsigned char **out, unsigned char *op_end, + size_t *tp, void *wrkmem, + signed char *state_offset, + const unsigned char bitstream_version) { const unsigned char *ip; unsigned char *op; @@ -30,8 +41,9 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, const unsigned char * const ip_end = in + in_len - 20; const unsigned char *ii; lzo_dict_t * const dict = (lzo_dict_t *) wrkmem; + size_t ti = *tp; - op = out; + op = *out; ip = in; ii = ip; ip += ti < 4 ? 4 - ti : 0; @@ -118,25 +130,32 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, if (t != 0) { if (t <= 3) { op[*state_offset] |= t; + NEED_OP(4); COPY4(op, ii); op += t; } else if (t <= 16) { + NEED_OP(17); *op++ = (t - 3); COPY8(op, ii); COPY8(op + 8, ii + 8); op += t; } else { if (t <= 18) { + NEED_OP(1); *op++ = (t - 3); } else { size_t tt = t - 18; + NEED_OP(1); *op++ = 0; while (unlikely(tt > 255)) { tt -= 255; + NEED_OP(1); *op++ = 0; } + NEED_OP(1); *op++ = tt; } + NEED_OP(t); do { COPY8(op, ii); COPY8(op + 8, ii + 8); @@ -153,6 +172,7 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, if (unlikely(run_length)) { ip += run_length; run_length -= MIN_ZERO_RUN_LENGTH; + NEED_OP(4); put_unaligned_le32((run_length << 21) | 0xfffc18 | (run_length & 0x7), op); op += 4; @@ -245,10 +265,12 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, ip += m_len; if (m_len <= M2_MAX_LEN && m_off <= M2_MAX_OFFSET) { m_off -= 1; + NEED_OP(2); *op++ = (((m_len - 1) << 5) | ((m_off & 7) << 2)); *op++ = (m_off >> 3); } else if (m_off <= M3_MAX_OFFSET) { m_off -= 1; + NEED_OP(1); if (m_len <= M3_MAX_LEN) *op++ = (M3_MARKER | (m_len - 2)); else { @@ -256,14 +278,18 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, *op++ = M3_MARKER | 0; while (unlikely(m_len > 255)) { m_len -= 255; + NEED_OP(1); *op++ = 0; } + NEED_OP(1); *op++ = (m_len); } + NEED_OP(2); *op++ = (m_off << 2); *op++ = (m_off >> 6); } else { m_off -= 0x4000; + NEED_OP(1); if (m_len <= M4_MAX_LEN) *op++ = (M4_MARKER | ((m_off >> 11) & 8) | (m_len - 2)); @@ -284,11 +310,14 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, m_len -= M4_MAX_LEN; *op++ = (M4_MARKER | ((m_off >> 11) & 8)); while (unlikely(m_len > 255)) { + NEED_OP(1); m_len -= 255; *op++ = 0; } + NEED_OP(1); *op++ = (m_len); } + NEED_OP(2); *op++ = (m_off << 2); *op++ = (m_off >> 6); } @@ -297,14 +326,20 @@ lzo1x_1_do_compress(const unsigned char *in, size_t in_len, ii = ip; goto next; } - *out_len = op - out; - return in_end - (ii - ti); + *out = op; + *tp = in_end - (ii - ti); + return LZO_E_OK; + +output_overrun: + return LZO_E_OUTPUT_OVERRUN; } -int lzogeneric1x_1_compress(const unsigned char *in, size_t in_len, - unsigned char *out, size_t *out_len, - void *wrkmem, const unsigned char bitstream_version) +static int LZO_SAFE(lzogeneric1x_1_compress)( + const unsigned char *in, size_t in_len, + unsigned char *out, size_t *out_len, + void *wrkmem, const unsigned char bitstream_version) { + unsigned char * const op_end = out + *out_len; const unsigned char *ip = in; unsigned char *op = out; unsigned char *data_start; @@ -328,14 +363,18 @@ int lzogeneric1x_1_compress(const unsigned char *in, size_t in_len, while (l > 20) { size_t ll = l <= (m4_max_offset + 1) ? l : (m4_max_offset + 1); uintptr_t ll_end = (uintptr_t) ip + ll; + int err; + if ((ll_end + ((t + ll) >> 5)) <= ll_end) break; BUILD_BUG_ON(D_SIZE * sizeof(lzo_dict_t) > LZO1X_1_MEM_COMPRESS); memset(wrkmem, 0, D_SIZE * sizeof(lzo_dict_t)); - t = lzo1x_1_do_compress(ip, ll, op, out_len, t, wrkmem, - &state_offset, bitstream_version); + err = LZO_SAFE(lzo1x_1_do_compress)( + ip, ll, &op, op_end, &t, wrkmem, + &state_offset, bitstream_version); + if (err != LZO_E_OK) + return err; ip += ll; - op += *out_len; l -= ll; } t += l; @@ -344,20 +383,26 @@ int lzogeneric1x_1_compress(const unsigned char *in, size_t in_len, const unsigned char *ii = in + in_len - t; if (op == data_start && t <= 238) { + NEED_OP(1); *op++ = (17 + t); } else if (t <= 3) { op[state_offset] |= t; } else if (t <= 18) { + NEED_OP(1); *op++ = (t - 3); } else { size_t tt = t - 18; + NEED_OP(1); *op++ = 0; while (tt > 255) { tt -= 255; + NEED_OP(1); *op++ = 0; } + NEED_OP(1); *op++ = tt; } + NEED_OP(t); if (t >= 16) do { COPY8(op, ii); COPY8(op + 8, ii + 8); @@ -370,31 +415,38 @@ int lzogeneric1x_1_compress(const unsigned char *in, size_t in_len, } while (--t > 0); } + NEED_OP(3); *op++ = M4_MARKER | 1; *op++ = 0; *op++ = 0; *out_len = op - out; return LZO_E_OK; + +output_overrun: + return LZO_E_OUTPUT_OVERRUN; } -int lzo1x_1_compress(const unsigned char *in, size_t in_len, - unsigned char *out, size_t *out_len, - void *wrkmem) +int LZO_SAFE(lzo1x_1_compress)(const unsigned char *in, size_t in_len, + unsigned char *out, size_t *out_len, + void *wrkmem) { - return lzogeneric1x_1_compress(in, in_len, out, out_len, wrkmem, 0); + return LZO_SAFE(lzogeneric1x_1_compress)( + in, in_len, out, out_len, wrkmem, 0); } -int lzorle1x_1_compress(const unsigned char *in, size_t in_len, - unsigned char *out, size_t *out_len, - void *wrkmem) +int LZO_SAFE(lzorle1x_1_compress)(const unsigned char *in, size_t in_len, + unsigned char *out, size_t *out_len, + void *wrkmem) { - return lzogeneric1x_1_compress(in, in_len, out, out_len, - wrkmem, LZO_VERSION); + return LZO_SAFE(lzogeneric1x_1_compress)( + in, in_len, out, out_len, wrkmem, LZO_VERSION); } -EXPORT_SYMBOL_GPL(lzo1x_1_compress); -EXPORT_SYMBOL_GPL(lzorle1x_1_compress); +EXPORT_SYMBOL_GPL(LZO_SAFE(lzo1x_1_compress)); +EXPORT_SYMBOL_GPL(LZO_SAFE(lzorle1x_1_compress)); +#ifndef LZO_UNSAFE MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("LZO1X-1 Compressor"); +#endif diff --git a/lib/lzo/lzo1x_compress_safe.c b/lib/lzo/lzo1x_compress_safe.c new file mode 100644 index 000000000000..371c9f849492 --- /dev/null +++ b/lib/lzo/lzo1x_compress_safe.c @@ -0,0 +1,18 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * LZO1X Compressor from LZO + * + * Copyright (C) 1996-2012 Markus F.X.J. Oberhumer <markus(a)oberhumer.com> + * + * The full LZO package can be found at: + * http://www.oberhumer.com/opensource/lzo/ + * + * Changed for Linux kernel use by: + * Nitin Gupta <nitingupta910(a)gmail.com> + * Richard Purdie <rpurdie(a)openedhand.com> + */ + +#define LZO_SAFE(name) name##_safe +#define HAVE_OP(x) ((size_t)(op_end - op) >= (size_t)(x)) + +#include "lzo1x_compress.c" -- 2.34.1

2 1

[PATCH v12 00/13] arm64: entry: Convert to Generic Entry
by Jinjie Ruan 03 Feb '26

03 Feb '26

Currently, x86, Riscv, Loongarch use the Generic Entry which makes maintainers' work easier and codes more elegant. arm64 has already successfully switched to the Generic IRQ Entry in commit b3cf07851b6c ("arm64: entry: Switch to generic IRQ entry"), it is time to completely convert arm64 to Generic Entry. The goal is to bring arm64 in line with other architectures that already use the generic entry infrastructure, reducing duplicated code and making it easier to share future changes in entry/exit paths, such as "Syscall User Dispatch". This patch set is rebased on "sched/core". And the performance was measured on Kunpeng 920 using "perf bench basic syscall" with "arm64.nopauth selinux=0 audit=1". On the basis of optimizing syscall_get_arguments()[1], el0_svc_common(), the performance are below: | Metric | W/O Generic Entry | With Generic Entry opt| Change | | ---------- | ----------------- | ------------------ | ------ | | Total time | 2.487 [sec] | 2.264 [sec] | ↓9.0% | | usecs/op | 0.248780 | 0.226481 | ↓9.0% | | ops/sec | 4,019,620 | 4,415,383 | ↑9.8% | Therefore, after the optimization, ARM64 System Call performance improved by approximately 9%. It was tested ok with following test cases on kunpeng920 and QEMU virt platform: - Perf tests. - Different `dynamic preempt` mode switch. - Pseudo NMI tests. - Stress-ng CPU stress test. - Hackbench stress test. - MTE test case in Documentation/arch/arm64/memory-tagging-extension.rst and all test cases in tools/testing/selftests/arm64/mte/*. - "sud" selftest testcase. - get_set_sud, get_syscall_info, set_syscall_info, peeksiginfo in tools/testing/selftests/ptrace. - breakpoint_test_arm64 in selftests/breakpoints. - syscall-abi and ptrace in tools/testing/selftests/arm64/abi - fp-ptrace, sve-ptrace, za-ptrace in selftests/arm64/fp. - vdso_test_getrandom in tools/testing/selftests/vDSO - Strace tests. The test QEMU configuration is as follows: qemu-system-aarch64 \ -M virt,gic-version=3,virtualization=on,mte=on \ -cpu max,pauth-impdef=on \ -kernel Image \ -smp 8,sockets=1,cores=4,threads=2 \ -m 512m \ -nographic \ -no-reboot \ -device virtio-rng-pci \ -append "root=/dev/vda rw console=ttyAMA0 kgdboc=ttyAMA0,115200 \ earlycon preempt=voluntary irqchip.gicv3_pseudo_nmi=1" \ -drive if=none,file=images/rootfs.ext4,format=raw,id=hd0 \ -device virtio-blk-device,drive=hd0 \ [1]: https://kernel.googlesource.com/pub/scm/linux/kernel/git/akpm/mm/+/89bf683c… Changes in v12: - Rebased on "sched/core", so remove the four generic entry patches. - Move "Expand secure_computing() in place" and "Use syscall_get_arguments() helper" patch forward, which will group all non-functional cleanups at the front. - Adjust the explanation for moving rseq_syscall() before audit_syscall_exit(). - Link to v11: https://lore.kernel.org/all/20260128031934.3906955-1-ruanjinjie@huawei.com/ Changes in v11: - Remove unused syscall in syscall_trace_enter(). - Update and provide a detailed explanation of the differences after moving rseq_syscall() before audit_syscall_exit(). - Rebased on arm64 (for-next/entry), and remove the first applied 3 patchs. - syscall_exit_to_user_mode_work() for arch reuse instead of adding new syscall_exit_to_user_mode_work_prepare() helper. - Link to v10: https://lore.kernel.org/all/20251222114737.1334364-1-ruanjinjie@huawei.com/ Changes in v10: - Rebased on v6.19-rc1, rename syscall_exit_to_user_mode_prepare() to syscall_exit_to_user_mode_work_prepare() to avoid conflict. - Also inline syscall_trace_enter(). - Support aarch64 for sud_benchmark. - Update and correct the commit message. - Add Reviewed-by. - Link to v9: https://lore.kernel.org/all/20251204082123.2792067-1-ruanjinjie@huawei.com/ Changes in v9: - Move "Return early for ptrace_report_syscall_entry() error" patch ahead to make it not introduce a regression. - Not check _TIF_SECCOMP/SYSCALL_EMU for syscall_exit_work() in a separate patch. - Do not report_syscall_exit() for PTRACE_SYSEMU_SINGLESTEP in a separate patch. - Add two performance patch to improve the arm64 performance. - Add Reviewed-by. - Link to v8: https://lore.kernel.org/all/20251126071446.3234218-1-ruanjinjie@huawei.com/ Changes in v8: - Rename "report_syscall_enter()" to "report_syscall_entry()". - Add ptrace_save_reg() to avoid duplication. - Remove unused _TIF_WORK_MASK in a standalone patch. - Align syscall_trace_enter() return value with the generic version. - Use "scno" instead of regs->syscallno in el0_svc_common(). - Move rseq_syscall() ahead in a standalone patch to clarify it clearly. - Rename "syscall_trace_exit()" to "syscall_exit_work()". - Keep the goto in el0_svc_common(). - No argument was passed to __secure_computing() and check -1 not -1L. - Remove "Add has_syscall_work() helper" patch. - Move "Add syscall_exit_to_user_mode_prepare() helper" patch later. - Add miss header for asm/entry-common.h. - Update the implementation of arch_syscall_is_vdso_sigreturn(). - Add "ARCH_SYSCALL_WORK_EXIT" to be defined as "SECCOMP | SYSCALL_EMU" to keep the behaviour unchanged. - Add more testcases test. - Add Reviewed-by. - Update the commit message. - Link to v7: https://lore.kernel.org/all/20251117133048.53182-1-ruanjinjie@huawei.com/ Jinjie Ruan (12): arm64: Remove unused _TIF_WORK_MASK arm64/ptrace: Split report_syscall() arm64/ptrace: Return early for ptrace_report_syscall_entry() error arm64/ptrace: Refactor syscall_trace_enter/exit() arm64/ptrace: Expand secure_computing() in place arm64/ptrace: Use syscall_get_arguments() helper arm64: ptrace: Move rseq_syscall() before audit_syscall_exit() arm64: syscall: Rework el0_svc_common() arm64/ptrace: Not check _TIF_SECCOMP/SYSCALL_EMU for syscall_exit_work() arm64/ptrace: Do not report_syscall_exit() for PTRACE_SYSEMU_SINGLESTEP arm64: entry: Convert to generic entry arm64: Inline el0_svc_common() kemal (1): selftests: sud_test: Support aarch64 arch/arm64/Kconfig | 2 +- arch/arm64/include/asm/entry-common.h | 76 +++++++++++++++ arch/arm64/include/asm/syscall.h | 19 +++- arch/arm64/include/asm/thread_info.h | 22 +---- arch/arm64/kernel/debug-monitors.c | 7 ++ arch/arm64/kernel/ptrace.c | 94 ------------------- arch/arm64/kernel/signal.c | 2 +- arch/arm64/kernel/syscall.c | 29 ++---- .../syscall_user_dispatch/sud_benchmark.c | 2 +- .../syscall_user_dispatch/sud_test.c | 4 + 10 files changed, 115 insertions(+), 142 deletions(-) -- 2.34.1

1 13

[PATCH OLK-6.6] LoongArch: BPF: Sign extend kfunc call arguments
by Lin Yujun 03 Feb '26

03 Feb '26

From: Hengqi Chen <hengqi.chen(a)gmail.com> stable inclusion from stable-v6.6.120 commit fd43edf357a3a1f5ed1c4bf450b60001c9091c39 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13443 CVE: CVE-2025-71129 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 3f5a238f24d7b75f9efe324d3539ad388f58536e upstream. The kfunc calls are native calls so they should follow LoongArch calling conventions. Sign extend its arguments properly to avoid kernel panic. This is done by adding a new emit_abi_ext() helper. The emit_abi_ext() helper performs extension in place meaning a value already store in the target register (Note: this is different from the existing sign_extend() helper and thus we can't reuse it). Cc: stable(a)vger.kernel.org Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support") Signed-off-by: Hengqi Chen <hengqi.chen(a)gmail.com> Signed-off-by: Huacai Chen <chenhuacai(a)loongson.cn> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Lin Yujun <linyujun809(a)h-partners.com> --- arch/loongarch/net/bpf_jit.c | 16 ++++++++++++++++ arch/loongarch/net/bpf_jit.h | 26 ++++++++++++++++++++++++++ 2 files changed, 42 insertions(+) diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c index c6d4f2200cc1..2258624a3247 100644 --- a/arch/loongarch/net/bpf_jit.c +++ b/arch/loongarch/net/bpf_jit.c @@ -830,10 +830,26 @@ static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx, bool ext ret = bpf_jit_get_func_addr(ctx->prog, insn, extra_pass, &func_addr, &func_addr_fixed); if (ret < 0) return ret; + if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) { + const struct btf_func_model *m; + int i; + + m = bpf_jit_find_kfunc_model(ctx->prog, insn); + if (!m) + return -EINVAL; + + for (i = 0; i < m->nr_args; i++) { + u8 reg = regmap[BPF_REG_1 + i]; + bool sign = m->arg_flags[i] & BTF_FMODEL_SIGNED_ARG; + + emit_abi_ext(ctx, reg, m->arg_size[i], sign); + } + } + move_addr(ctx, t1, func_addr); emit_insn(ctx, jirl, LOONGARCH_GPR_RA, t1, 0); if (insn->src_reg != BPF_PSEUDO_CALL) move_reg(ctx, regmap[BPF_REG_0], LOONGARCH_GPR_A0); diff --git a/arch/loongarch/net/bpf_jit.h b/arch/loongarch/net/bpf_jit.h index f9c569f53949..9352ea554530 100644 --- a/arch/loongarch/net/bpf_jit.h +++ b/arch/loongarch/net/bpf_jit.h @@ -85,10 +85,36 @@ static inline void emit_sext_32(struct jit_ctx *ctx, enum loongarch_gpr reg, boo return; emit_insn(ctx, addiw, reg, reg, 0); } +/* Emit proper extension according to ABI requirements. + * Note that it requires a value of size `size` already resides in register `reg`. + */ +static inline void emit_abi_ext(struct jit_ctx *ctx, int reg, u8 size, bool sign) +{ + /* ABI requires unsigned char/short to be zero-extended */ + if (!sign && (size == 1 || size == 2)) + return; + + switch (size) { + case 1: + emit_insn(ctx, extwb, reg, reg); + break; + case 2: + emit_insn(ctx, extwh, reg, reg); + break; + case 4: + emit_insn(ctx, addiw, reg, reg, 0); + break; + case 8: + break; + default: + pr_warn("bpf_jit: invalid size %d for extension\n", size); + } +} + static inline void move_addr(struct jit_ctx *ctx, enum loongarch_gpr rd, u64 addr) { u64 imm_11_0, imm_31_12, imm_51_32, imm_63_52; /* lu12iw rd, imm_31_12 */ -- 2.34.1

2 1

[PATCH OLK-6.6 0/2] *** fix CVE-2025-38062 ***
by Lin Ruifeng 03 Feb '26

03 Feb '26

*** fix CVE-2025-38062 *** Jason Gunthorpe (1): genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie Lin Ruifeng (1): genirq/msi:: Fix kabi break of struct msi_desc drivers/iommu/dma-iommu.c | 28 +++++++++++++--------------- include/linux/msi.h | 35 +++++++++++++++-------------------- 2 files changed, 28 insertions(+), 35 deletions(-) -- 2.43.0

2 3

[PATCH openEuler-1.0-LTS] dm flakey: don't corrupt the zero page
by Yuan can 03 Feb '26

03 Feb '26

From: Mikulas Patocka <mpatocka(a)redhat.com> stable inclusion from stable-v4.19.276 commit 98e311be44dbe31ad9c42aa067b2359bac451fda category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13114 CVE: CVE-2023-54317 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit f50714b57aecb6b3dc81d578e295f86d9c73f078 upstream. When we need to zero some range on a block device, the function __blkdev_issue_zero_pages submits a write bio with the bio vector pointing to the zero page. If we use dm-flakey with corrupt bio writes option, it will corrupt the content of the zero page which results in crashes of various userspace programs. Glibc assumes that memory returned by mmap is zeroed and it uses it for calloc implementation; if the newly mapped memory is not zeroed, calloc will return non-zeroed memory. Fix this bug by testing if the page is equal to ZERO_PAGE(0) and avoiding the corruption in this case. Cc: stable(a)vger.kernel.org Fixes: a00f5276e266 ("dm flakey: Properly corrupt multi-page bios.") Signed-off-by: Mikulas Patocka <mpatocka(a)redhat.com> Reviewed-by: Sweet Tea Dorminy <sweettea-kernel(a)dorminy.me> Signed-off-by: Mike Snitzer <snitzer(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yuan can <yuancan(a)huawei.com> --- drivers/md/dm-flakey.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index 9a955b8cf378..6a8c7ec21219 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -299,12 +299,15 @@ static void corrupt_bio_data(struct bio *bio, struct flakey_c *fc) * Overwrite the Nth byte of the bio's data, on whichever page * it falls. */ bio_for_each_segment(bvec, bio, iter) { if (bio_iter_len(bio, iter) > corrupt_bio_byte) { - char *segment = (page_address(bio_iter_page(bio, iter)) - + bio_iter_offset(bio, iter)); + char *segment; + struct page *page = bio_iter_page(bio, iter); + if (unlikely(page == ZERO_PAGE(0))) + break; + segment = (page_address(page) + bio_iter_offset(bio, iter)); segment[corrupt_bio_byte] = fc->corrupt_bio_value; DMDEBUG("Corrupting data bio=%p by writing %u to byte %u " "(rw=%c bi_opf=%u bi_sector=%llu size=%u)\n", bio, fc->corrupt_bio_value, fc->corrupt_bio_byte, (bio_data_dir(bio) == WRITE) ? 'w' : 'r', bio->bi_opf, -- 2.34.1

2 1

[PATCH OLK-5.10] atm: atmtcp: Prevent arbitrary write in atmtcp_recv_control().
by Lin Ruifeng 03 Feb '26

03 Feb '26

From: Kuniyuki Iwashima <kuniyu(a)google.com> stable inclusion from stable-v5.10.242 commit 0a6a6d4fb333f7afe22e59ffed18511a7a98efc8 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/12387 CVE: CVE-2025-39828 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit ec79003c5f9d2c7f9576fc69b8dbda80305cbe3a ] syzbot reported the splat below. [0] When atmtcp_v_open() or atmtcp_v_close() is called via connect() or close(), atmtcp_send_control() is called to send an in-kernel special message. The message has ATMTCP_HDR_MAGIC in atmtcp_control.hdr.length. Also, a pointer of struct atm_vcc is set to atmtcp_control.vcc. The notable thing is struct atmtcp_control is uAPI but has a space for an in-kernel pointer. struct atmtcp_control { struct atmtcp_hdr hdr; /* must be first */ ... atm_kptr_t vcc; /* both directions */ ... } __ATM_API_ALIGN; typedef struct { unsigned char _[8]; } __ATM_API_ALIGN atm_kptr_t; The special message is processed in atmtcp_recv_control() called from atmtcp_c_send(). atmtcp_c_send() is vcc->dev->ops->send() and called from 2 paths: 1. .ndo_start_xmit() (vcc->send() == atm_send_aal0()) 2. vcc_sendmsg() The problem is sendmsg() does not validate the message length and userspace can abuse atmtcp_recv_control() to overwrite any kptr by atmtcp_control. Let's add a new ->pre_send() hook to validate messages from sendmsg(). [0]: Oops: general protection fault, probably for non-canonical address 0xdffffc00200000ab: 0000 [#1] SMP KASAN PTI KASAN: probably user-memory-access in range [0x0000000100000558-0x000000010000055f] CPU: 0 UID: 0 PID: 5865 Comm: syz-executor331 Not tainted 6.17.0-rc1-syzkaller-00215-gbab3ce404553 #0 PREEMPT(full) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025 RIP: 0010:atmtcp_recv_control drivers/atm/atmtcp.c:93 [inline] RIP: 0010:atmtcp_c_send+0x1da/0x950 drivers/atm/atmtcp.c:297 Code: 4d 8d 75 1a 4c 89 f0 48 c1 e8 03 42 0f b6 04 20 84 c0 0f 85 15 06 00 00 41 0f b7 1e 4d 8d b7 60 05 00 00 4c 89 f0 48 c1 e8 03 <42> 0f b6 04 20 84 c0 0f 85 13 06 00 00 66 41 89 1e 4d 8d 75 1c 4c RSP: 0018:ffffc90003f5f810 EFLAGS: 00010203 RAX: 00000000200000ab RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88802a510000 RSI: 00000000ffffffff RDI: ffff888030a6068c RBP: ffff88802699fb40 R08: ffff888030a606eb R09: 1ffff1100614c0dd R10: dffffc0000000000 R11: ffffffff8718fc40 R12: dffffc0000000000 R13: ffff888030a60680 R14: 000000010000055f R15: 00000000ffffffff FS: 00007f8d7e9236c0(0000) GS:ffff888125c1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 0000000075bde000 CR4: 00000000003526f0 Call Trace: <TASK> vcc_sendmsg+0xa10/0xc60 net/atm/common.c:645 sock_sendmsg_nosec net/socket.c:714 [inline] __sock_sendmsg+0x219/0x270 net/socket.c:729 ____sys_sendmsg+0x505/0x830 net/socket.c:2614 ___sys_sendmsg+0x21f/0x2a0 net/socket.c:2668 __sys_sendmsg net/socket.c:2700 [inline] __do_sys_sendmsg net/socket.c:2705 [inline] __se_sys_sendmsg net/socket.c:2703 [inline] __x64_sys_sendmsg+0x19b/0x260 net/socket.c:2703 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f8d7e96a4a9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f8d7e923198 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f8d7e9f4308 RCX: 00007f8d7e96a4a9 RDX: 0000000000000000 RSI: 0000200000000240 RDI: 0000000000000005 RBP: 00007f8d7e9f4300 R08: 65732f636f72702f R09: 65732f636f72702f R10: 65732f636f72702f R11: 0000000000000246 R12: 00007f8d7e9c10ac R13: 00007f8d7e9231a0 R14: 0000200000000200 R15: 0000200000000250 </TASK> Modules linked in: Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot+1741b56d54536f4ec349(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/68a6767c.050a0220.3d78fd.0011.GAE@google.com/ Tested-by: syzbot+1741b56d54536f4ec349(a)syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu(a)google.com> Link: https://patch.msgid.link/20250821021901.2814721-1-kuniyu@google.com Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/atm/atmtcp.c net/atm/common.c [Context Conflicts] Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- drivers/atm/atmtcp.c | 14 ++++++++++++++ include/linux/atmdev.h | 1 + net/atm/common.c | 13 +++++++++++-- 3 files changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/atm/atmtcp.c b/drivers/atm/atmtcp.c index 96bea1ab1ecc..df2b47472de4 100644 --- a/drivers/atm/atmtcp.c +++ b/drivers/atm/atmtcp.c @@ -279,6 +279,19 @@ static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci) return NULL; } +static int atmtcp_c_pre_send(struct atm_vcc *vcc, struct sk_buff *skb) +{ + struct atmtcp_hdr *hdr; + + if (skb->len < sizeof(struct atmtcp_hdr)) + return -EINVAL; + + hdr = (struct atmtcp_hdr *)skb->data; + if (hdr->length == ATMTCP_HDR_MAGIC) + return -EINVAL; + + return 0; +} static int atmtcp_c_send(struct atm_vcc *vcc,struct sk_buff *skb) { @@ -345,6 +358,7 @@ static const struct atmdev_ops atmtcp_v_dev_ops = { static const struct atmdev_ops atmtcp_c_dev_ops = { .close = atmtcp_c_close, + .pre_send = atmtcp_c_pre_send, .send = atmtcp_c_send }; diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 5d5ff2203fa2..cedf880259d3 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -185,6 +185,7 @@ struct atmdev_ops { /* only send is required */ int (*compat_ioctl)(struct atm_dev *dev,unsigned int cmd, void __user *arg); #endif + int (*pre_send)(struct atm_vcc *vcc, struct sk_buff *skb); int (*send)(struct atm_vcc *vcc,struct sk_buff *skb); int (*send_oam)(struct atm_vcc *vcc,void *cell,int flags); void (*phy_put)(struct atm_dev *dev,unsigned char value, diff --git a/net/atm/common.c b/net/atm/common.c index 1cfa9bf1d187..cb153d6e6745 100644 --- a/net/atm/common.c +++ b/net/atm/common.c @@ -635,17 +635,26 @@ int vcc_sendmsg(struct socket *sock, struct msghdr *m, size_t size) skb->dev = NULL; /* for paths shared with net_device interfaces */ if (!copy_from_iter_full(skb_put(skb, size), size, &m->msg_iter)) { - kfree_skb(skb); error = -EFAULT; - goto out; + goto free_skb; } if (eff != size) memset(skb->data + size, 0, eff-size); + + if (vcc->dev->ops->pre_send) { + error = vcc->dev->ops->pre_send(vcc, skb); + if (error) + goto free_skb; + } + error = vcc->dev->ops->send(vcc, skb); error = error ? error : size; out: release_sock(sk); return error; +free_skb: + kfree_skb(skb); + goto out; } __poll_t vcc_poll(struct file *file, struct socket *sock, poll_table *wait) -- 2.43.0

2 1

[PATCH OLK-6.6 0/2] *** fix CVE-2025-38062 ***
by Lin Ruifeng 03 Feb '26

03 Feb '26

*** fix CVE-2025-38062 *** Jason Gunthorpe (1): genirq/msi: Store the IOMMU IOVA directly in msi_desc instead of iommu_cookie Lin Ruifeng (1): genirq/msi:: Fix kabi break of struct msi_desc drivers/iommu/dma-iommu.c | 28 +++++++++++++--------------- include/linux/msi.h | 35 +++++++++++++++-------------------- 2 files changed, 28 insertions(+), 35 deletions(-) -- 2.43.0

2 3

[PATCH OLK-6.6] iommu/s390: Implement blocking domain
by Lin Ruifeng 03 Feb '26

03 Feb '26

From: Matthew Rosato <mjrosato(a)linux.ibm.com> mainline inclusion from mainline-v6.13-rc1 commit ecda483339a5151e3ca30d6b82691ef6f1d17912 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/1633 CVE: CVE-2024-53232 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… --------------------------------------------------------------- This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. Fixes: c76c067e488c ("s390/pci: Use dma-iommu layer") Co-developed-by: Niklas Schnelle <schnelle(a)linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle(a)linux.ibm.com> Signed-off-by: Matthew Rosato <mjrosato(a)linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle(a)linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg(a)nvidia.com> Link: https://lore.kernel.org/r/20240910211516.137933-1-mjrosato@linux.ibm.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Conflicts: drivers/iommu/s390-iommu.c arch/s390/pci/pci.c [Some context differences] Signed-off-by: Zhang Zekun <zhangzekun11(a)huawei.com> Signed-off-by: Lin Ruifeng <linruifeng4(a)huawei.com> --- arch/s390/include/asm/pci.h | 4 +- arch/s390/pci/pci_debug.c | 10 ++++- drivers/iommu/s390-iommu.c | 73 +++++++++++++++++++++++-------------- 3 files changed, 56 insertions(+), 31 deletions(-) diff --git a/arch/s390/include/asm/pci.h b/arch/s390/include/asm/pci.h index 3f74f1cf37df..e0fae2739994 100644 --- a/arch/s390/include/asm/pci.h +++ b/arch/s390/include/asm/pci.h @@ -96,7 +96,6 @@ struct zpci_bar_struct { u8 size; /* order 2 exponent */ }; -struct s390_domain; struct kvm_zdev; #define ZPCI_FUNCTIONS_PER_BUS 256 @@ -184,9 +183,10 @@ struct zpci_dev { struct dentry *debugfs_dev; /* IOMMU and passthrough */ - struct s390_domain *s390_domain; /* s390 IOMMU domain data */ + struct iommu_domain *s390_domain; /* attached IOMMU domain */ struct kvm_zdev *kzdev; struct mutex kzdev_lock; + spinlock_t dom_lock; /* protect s390_domain change */ }; static inline bool zdev_enabled(struct zpci_dev *zdev) diff --git a/arch/s390/pci/pci_debug.c b/arch/s390/pci/pci_debug.c index 6dde2263c79d..ac4d172f2740 100644 --- a/arch/s390/pci/pci_debug.c +++ b/arch/s390/pci/pci_debug.c @@ -71,17 +71,23 @@ static void pci_fmb_show(struct seq_file *m, char *name[], int length, static void pci_sw_counter_show(struct seq_file *m) { - struct zpci_iommu_ctrs *ctrs = zpci_get_iommu_ctrs(m->private); + struct zpci_dev *zdev = m->private; + struct zpci_iommu_ctrs *ctrs; atomic64_t *counter; + unsigned long flags; int i; + spin_lock_irqsave(&zdev->dom_lock, flags); + ctrs = zpci_get_iommu_ctrs(m->private); if (!ctrs) - return; + goto unlock; counter = &ctrs->mapped_pages; for (i = 0; i < ARRAY_SIZE(pci_sw_names); i++, counter++) seq_printf(m, "%26s:\t%llu\n", pci_sw_names[i], atomic64_read(counter)); +unlock: + spin_unlock_irqrestore(&zdev->dom_lock, flags); } static int pci_perf_show(struct seq_file *m, void *v) diff --git a/drivers/iommu/s390-iommu.c b/drivers/iommu/s390-iommu.c index 9a5196f523de..db9fc74f9027 100644 --- a/drivers/iommu/s390-iommu.c +++ b/drivers/iommu/s390-iommu.c @@ -33,6 +33,8 @@ struct s390_domain { struct rcu_head rcu; }; +static struct iommu_domain blocking_domain; + static inline unsigned int calc_rtx(dma_addr_t ptr) { return ((unsigned long)ptr >> ZPCI_RT_SHIFT) & ZPCI_INDEX_MASK; @@ -369,20 +371,36 @@ static void s390_domain_free(struct iommu_domain *domain) call_rcu(&s390_domain->rcu, s390_iommu_rcu_free_domain); } -static void s390_iommu_detach_device(struct iommu_domain *domain, - struct device *dev) +static void zdev_s390_domain_update(struct zpci_dev *zdev, + struct iommu_domain *domain) +{ + unsigned long flags; + + spin_lock_irqsave(&zdev->dom_lock, flags); + zdev->s390_domain = domain; + spin_unlock_irqrestore(&zdev->dom_lock, flags); +} + +static int blocking_domain_attach_device(struct iommu_domain *domain, + struct device *dev) { - struct s390_domain *s390_domain = to_s390_domain(domain); struct zpci_dev *zdev = to_zpci_dev(dev); + struct s390_domain *s390_domain; unsigned long flags; + if (zdev->s390_domain->type == IOMMU_DOMAIN_BLOCKED) + return 0; + + s390_domain = to_s390_domain(zdev->s390_domain); spin_lock_irqsave(&s390_domain->list_lock, flags); list_del_rcu(&zdev->iommu_list); spin_unlock_irqrestore(&s390_domain->list_lock, flags); zpci_unregister_ioat(zdev, 0); - zdev->s390_domain = NULL; zdev->dma_table = NULL; + zdev_s390_domain_update(zdev, domain); + + return 0; } static int s390_iommu_attach_device(struct iommu_domain *domain, @@ -401,20 +419,15 @@ static int s390_iommu_attach_device(struct iommu_domain *domain, domain->geometry.aperture_end < zdev->start_dma)) return -EINVAL; - if (zdev->s390_domain) - s390_iommu_detach_device(&zdev->s390_domain->domain, dev); + blocking_domain_attach_device(&blocking_domain, dev); + /* If we fail now DMA remains blocked via blocking domain */ cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma, virt_to_phys(s390_domain->dma_table), &status); - /* - * If the device is undergoing error recovery the reset code - * will re-establish the new domain. - */ if (cc && status != ZPCI_PCI_ST_FUNC_NOT_AVAIL) return -EIO; - zdev->dma_table = s390_domain->dma_table; - zdev->s390_domain = s390_domain; + zdev_s390_domain_update(zdev, domain); spin_lock_irqsave(&s390_domain->list_lock, flags); list_add_rcu(&zdev->iommu_list, &s390_domain->devices); @@ -466,19 +479,11 @@ static struct iommu_device *s390_iommu_probe_device(struct device *dev) if (zdev->tlb_refresh) dev->iommu->shadow_on_flush = 1; - return &zdev->iommu_dev; -} + /* Start with DMA blocked */ + spin_lock_init(&zdev->dom_lock); + zdev_s390_domain_update(zdev, &blocking_domain); -static void s390_iommu_release_device(struct device *dev) -{ - struct zpci_dev *zdev = to_zpci_dev(dev); - - /* - * release_device is expected to detach any domain currently attached - * to the device, but keep it attached to other devices in the group. - */ - if (zdev) - s390_iommu_detach_device(&zdev->s390_domain->domain, dev); + return &zdev->iommu_dev; } static int zpci_refresh_all(struct zpci_dev *zdev) @@ -702,9 +707,15 @@ static void s390_iommu_probe_finalize(struct device *dev) struct zpci_iommu_ctrs *zpci_get_iommu_ctrs(struct zpci_dev *zdev) { - if (!zdev || !zdev->s390_domain) + struct s390_domain *s390_domain; + + lockdep_assert_held(&zdev->dom_lock); + + if (zdev->s390_domain->type == IOMMU_DOMAIN_BLOCKED) return NULL; - return &zdev->s390_domain->ctrs; + + s390_domain = to_s390_domain(zdev->s390_domain); + return &s390_domain->ctrs; } int zpci_init_iommu(struct zpci_dev *zdev) @@ -781,12 +792,20 @@ static int __init s390_iommu_init(void) } subsys_initcall(s390_iommu_init); +static struct iommu_domain blocking_domain = { + .type = IOMMU_DOMAIN_BLOCKED, + .ops = &(const struct iommu_domain_ops) { + .attach_dev = blocking_domain_attach_device, + } +}; + static const struct iommu_ops s390_iommu_ops = { + .blocked_domain = &blocking_domain, + .release_domain = &blocking_domain, .capable = s390_iommu_capable, .domain_alloc_paging = s390_domain_alloc_paging, .probe_device = s390_iommu_probe_device, .probe_finalize = s390_iommu_probe_finalize, - .release_device = s390_iommu_release_device, .device_group = generic_device_group, .pgsize_bitmap = SZ_4K, .get_resv_regions = s390_iommu_get_resv_regions, -- 2.43.0

2 1

[PATCH OLK-6.6 0/2] Fix CVE-2025-68785
by Zhao Yipeng 03 Feb '26

03 Feb '26

Patch #1 is the prerequisite patch, and Patch #2 fixes CVE-2025-68785. Ilya Maximets (2): net: openvswitch: remove never-working support for setting nsh fields net: openvswitch: fix middle attribute validation in push_nsh() action net/openvswitch/actions.c | 68 +------------------------------- net/openvswitch/flow_netlink.c | 71 +++++++--------------------------- net/openvswitch/flow_netlink.h | 2 - 3 files changed, 16 insertions(+), 125 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 v4 00/13] net: LTS-6.6 backport
by Dong Chenchen 03 Feb '26

03 Feb '26

net LTS-6.6 patches backport Aakash Kumar S (1): xfrm: Duplicate SPI Handling Bui Quang Minh (1): virtio-net: fix received length check in big packets Florian Westphal (1): netfilter: nf_reject: don't leak dst refcount for loopback packets Jakub Kicinski (3): tls: handle data disappearing from under the TLS ULP tls: make sure to abort the stream if headers are bogus page_pool: always add GFP_NOWARN for ATOMIC allocations Jiayuan Chen (1): bpf, ktls: Fix data corruption when using bpf_msg_pop_data() in ktls Kuniyuki Iwashima (1): Bluetooth: hci_core: Fix use-after-free in vhci_flush() Maher Azzouzi (1): net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing Michal Luczaj (1): vsock: Ignore signal/timeout on connect() if already established Nikolay Aleksandrov (1): net: bridge: fix use-after-free due to MST port state bypass Nishanth Menon (1): net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error Sabrina Dubroca (1): xfrm: xfrm_alloc_spi shouldn't use 0 as SPI drivers/net/ethernet/ti/netcp_core.c | 10 ++-- drivers/net/virtio_net.c | 25 +++++----- drivers/soc/ti/knav_dma.c | 14 +++--- include/net/bluetooth/hci_core.h | 1 + net/bluetooth/hci_core.c | 34 +++++++++++-- net/bridge/br_forward.c | 2 +- net/bridge/br_input.c | 4 +- net/bridge/br_private.h | 8 +-- net/core/page_pool.c | 6 +++ net/ipv4/netfilter/nf_reject_ipv4.c | 6 +-- net/ipv6/netfilter/nf_reject_ipv6.c | 5 +- net/sched/sch_mqprio.c | 2 +- net/tls/tls.h | 3 +- net/tls/tls_strp.c | 25 +++++++--- net/tls/tls_sw.c | 19 +++++-- net/vmw_vsock/af_vsock.c | 40 +++++++++++---- net/xfrm/xfrm_state.c | 75 +++++++++++++++++----------- 17 files changed, 186 insertions(+), 93 deletions(-) -- 2.25.1

2 14

[PATCH OLK-6.6 0/2] Fix NFS deadlock
by Li Lingfeng 03 Feb '26

03 Feb '26

Revert the patch from hulk and apply the one from mainline. Trond Myklebust (1): NFS: Fix a deadlock involving nfs_release_folio() Wang Zhaolong (1): Revert "[Huawei] Revert "NFS: fix up nfs_release_folio() to try to release the page"" fs/nfs/file.c | 11 +++++++++-- fs/nfs/nfstrace.h | 3 +++ fs/nfs/write.c | 33 +++++++++++++++++++++++++++++++++ include/linux/nfs_fs.h | 1 + 4 files changed, 46 insertions(+), 2 deletions(-) -- 2.52.0

2 3

[PATCH OLK-6.6] net: usb: rtl8150: fix memory leak on usb_submit_urb() failure
by Jinjiang Tu 03 Feb '26

03 Feb '26

From: Deepakkumar Karn <dkarn(a)redhat.com> stable inclusion from stable-v6.6.120 commit 4bd4ea3eb326608ffc296db12c105f92dc2f2190 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13480 CVE: CVE-2025-71154 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 12cab1191d9890097171156d06bfa8d31f1e39c8 ] In async_set_registers(), when usb_submit_urb() fails, the allocated async_req structure and URB are not freed, causing a memory leak. The completion callback async_set_reg_cb() is responsible for freeing these allocations, but it is only called after the URB is successfully submitted and completes (successfully or with error). If submission fails, the callback never runs and the memory is leaked. Fix this by freeing both the URB and the request structure in the error path when usb_submit_urb() fails. Reported-by: syzbot+8dd915c7cb0490fc8c52(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=8dd915c7cb0490fc8c52 Fixes: 4d12997a9bb3 ("drivers: net: usb: rtl8150: concurrent URB bugfix") Signed-off-by: Deepakkumar Karn <dkarn(a)redhat.com> Link: https://patch.msgid.link/20251216151304.59865-2-dkarn@redhat.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yuan can <yuancan(a)huawei.com> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- drivers/net/usb/rtl8150.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/usb/rtl8150.c b/drivers/net/usb/rtl8150.c index 92add3daadbb..f840fc374a29 100644 --- a/drivers/net/usb/rtl8150.c +++ b/drivers/net/usb/rtl8150.c @@ -211,6 +211,8 @@ static int async_set_registers(rtl8150_t *dev, u16 indx, u16 size, u16 reg) if (res == -ENODEV) netif_device_detach(dev->netdev); dev_err(&dev->udev->dev, "%s failed with %d\n", __func__, res); + kfree(req); + usb_free_urb(async_urb); } return res; } -- 2.43.0

2 1

[PATCH OLK-6.6] wifi: avoid kernel-infoleak from struct iw_point
by Jinjiang Tu 03 Feb '26

03 Feb '26

From: Eric Dumazet <edumazet(a)google.com> stable inclusion from stable-v6.6.121 commit d21ec867d84c9f3a9845d7d8c90c9ce35dbe48f8 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13487 CVE: CVE-2026-22978 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 21cbf883d073abbfe09e3924466aa5e0449e7261 upstream. struct iw_point has a 32bit hole on 64bit arches. struct iw_point { void __user *pointer; /* Pointer to the data (in user space) */ __u16 length; /* number of fields or size in bytes */ __u16 flags; /* Optional params */ }; Make sure to zero the structure to avoid disclosing 32bits of kernel data to user space. Fixes: 87de87d5e47f ("wext: Dispatch and handle compat ioctls entirely in net/wireless/wext.c") Reported-by: syzbot+bfc7323743ca6dbcc3d3(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/695f83f3.050a0220.1c677c.0392.GAE@google.com… Signed-off-by: Eric Dumazet <edumazet(a)google.com> Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/20260108101927.857582-1-edumazet@google.com Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- net/wireless/wext-core.c | 4 ++++ net/wireless/wext-priv.c | 4 ++++ 2 files changed, 8 insertions(+) diff --git a/net/wireless/wext-core.c b/net/wireless/wext-core.c index 838ad6541a17..73a29ee3eff2 100644 --- a/net/wireless/wext-core.c +++ b/net/wireless/wext-core.c @@ -1103,6 +1103,10 @@ static int compat_standard_call(struct net_device *dev, return ioctl_standard_call(dev, iwr, cmd, info, handler); iwp_compat = (struct compat_iw_point *) &iwr->u.data; + + /* struct iw_point has a 32bit hole on 64bit arches. */ + memset(&iwp, 0, sizeof(iwp)); + iwp.pointer = compat_ptr(iwp_compat->pointer); iwp.length = iwp_compat->length; iwp.flags = iwp_compat->flags; diff --git a/net/wireless/wext-priv.c b/net/wireless/wext-priv.c index 674d426a9d24..37d1147019c2 100644 --- a/net/wireless/wext-priv.c +++ b/net/wireless/wext-priv.c @@ -228,6 +228,10 @@ int compat_private_call(struct net_device *dev, struct iwreq *iwr, struct iw_point iwp; iwp_compat = (struct compat_iw_point *) &iwr->u.data; + + /* struct iw_point has a 32bit hole on 64bit arches. */ + memset(&iwp, 0, sizeof(iwp)); + iwp.pointer = compat_ptr(iwp_compat->pointer); iwp.length = iwp_compat->length; iwp.flags = iwp_compat->flags; -- 2.43.0

2 1

[PATCH OLK-6.6] mm/secretmem: fix use-after-free race in fault handler
by Jinjiang Tu 03 Feb '26

03 Feb '26

From: Lance Yang <lance.yang(a)linux.dev> stable inclusion from stable-v6.6.117 commit 42d486d35a4143cc37fc72ee66edc99d942dd367 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/11252 CVE: CVE-2025-40272 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 6f86d0534fddfbd08687fa0f01479d4226bc3c3d upstream. When a page fault occurs in a secret memory file created with `memfd_secret(2)`, the kernel will allocate a new folio for it, mark the underlying page as not-present in the direct map, and add it to the file mapping. If two tasks cause a fault in the same page concurrently, both could end up allocating a folio and removing the page from the direct map, but only one would succeed in adding the folio to the file mapping. The task that failed undoes the effects of its attempt by (a) freeing the folio again and (b) putting the page back into the direct map. However, by doing these two operations in this order, the page becomes available to the allocator again before it is placed back in the direct mapping. If another task attempts to allocate the page between (a) and (b), and the kernel tries to access it via the direct map, it would result in a supervisor not-present page fault. Fix the ordering to restore the direct map before the folio is freed. Link: https://lkml.kernel.org/r/20251031120955.92116-1-lance.yang@linux.dev Fixes: 1507f51255c9 ("mm: introduce memfd_secret system call to create "secret" memory areas") Signed-off-by: Lance Yang <lance.yang(a)linux.dev> Reported-by: Google Big Sleep <big-sleep-vuln-reports(a)google.com> Closes: https://lore.kernel.org/linux-mm/CAEXGt5QeDpiHTu3K9tvjUTPqo+d-=wuCNYPa+6sWK… Acked-by: David Hildenbrand <david(a)redhat.com> Reviewed-by: Mike Rapoport (Microsoft) <rppt(a)kernel.org> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> Cc: Matthew Wilcox (Oracle) <willy(a)infradead.org> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Mike Rapoport (Microsoft) <rppt(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- mm/secretmem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/secretmem.c b/mm/secretmem.c index 88fbd3598207..987def80d810 100644 --- a/mm/secretmem.c +++ b/mm/secretmem.c @@ -84,13 +84,13 @@ static vm_fault_t secretmem_fault(struct vm_fault *vmf) __folio_mark_uptodate(folio); err = filemap_add_folio(mapping, folio, offset, gfp); if (unlikely(err)) { - folio_put(folio); /* * If a split of large page was required, it * already happened when we marked the page invalid * which guarantees that this call won't fail */ set_direct_map_default_noflush(page); + folio_put(folio); if (err == -EEXIST) goto retry; -- 2.43.0

2 1

[PATCH OLK-6.6] mm/page_alloc: change all pageblocks migrate type on coalescing
by Jinjiang Tu 03 Feb '26

03 Feb '26

From: Alexander Gordeev <agordeev(a)linux.ibm.com> mainline inclusion from mainline-v6.19-rc4 commit 7838a4eb8a1d23160bd3f588ea7f2b8f7c00c55b category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13448 CVE: CVE-2025-71134 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When a page is freed it coalesces with a buddy into a higher order page while possible. When the buddy page migrate type differs, it is expected to be updated to match the one of the page being freed. However, only the first pageblock of the buddy page is updated, while the rest of the pageblocks are left unchanged. That causes warnings in later expand() and other code paths (like below), since an inconsistency between migration type of the list containing the page and the page-owned pageblocks migration types is introduced. [ 308.986589] ------------[ cut here ]------------ [ 308.987227] page type is 0, passed migratetype is 1 (nr=256) [ 308.987275] WARNING: CPU: 1 PID: 5224 at mm/page_alloc.c:812 expand+0x23c/0x270 [ 308.987293] Modules linked in: algif_hash(E) af_alg(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) s390_trng(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) i2c_core(E) drm_panel_orientation_quirks(E) loop(E) nfnetlink(E) vsock_loopback(E) vmw_vsock_virtio_transport_common(E) vsock(E) ctcm(E) fsm(E) diag288_wdt(E) watchdog(E) zfcp(E) scsi_transport_fc(E) ghash_s390(E) prng(E) aes_s390(E) des_generic(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha_common(E) paes_s390(E) crypto_engine(E) pkey_cca(E) pkey_ep11(E) zcrypt(E) rng_core(E) pkey_pckmo(E) pkey(E) autofs4(E) [ 308.987439] Unloaded tainted modules: hmac_s390(E):2 [ 308.987650] CPU: 1 UID: 0 PID: 5224 Comm: mempig_verify Kdump: loaded Tainted: G E 6.18.0-gcc-bpf-debug #431 PREEMPT [ 308.987657] Tainted: [E]=UNSIGNED_MODULE [ 308.987661] Hardware name: IBM 3906 M04 704 (z/VM 7.3.0) [ 308.987666] Krnl PSW : 0404f00180000000 00000349976fa600 (expand+0x240/0x270) [ 308.987676] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 308.987682] Krnl GPRS: 0000034980000004 0000000000000005 0000000000000030 000003499a0e6d88 [ 308.987688] 0000000000000005 0000034980000005 000002be803ac000 0000023efe6c8300 [ 308.987692] 0000000000000008 0000034998d57290 000002be00000100 0000023e00000008 [ 308.987696] 0000000000000000 0000000000000000 00000349976fa5fc 000002c99b1eb6f0 [ 308.987708] Krnl Code: 00000349976fa5f0: c020008a02f2 larl %r2,000003499883abd4 00000349976fa5f6: c0e5ffe3f4b5 brasl %r14,0000034997378f60 #00000349976fa5fc: af000000 mc 0,0 >00000349976fa600: a7f4ff4c brc 15,00000349976fa498 00000349976fa604: b9040026 lgr %r2,%r6 00000349976fa608: c0300088317f larl %r3,0000034998800906 00000349976fa60e: c0e5fffdb6e1 brasl %r14,00000349976b13d0 00000349976fa614: af000000 mc 0,0 [ 308.987734] Call Trace: [ 308.987738] [<00000349976fa600>] expand+0x240/0x270 [ 308.987744] ([<00000349976fa5fc>] expand+0x23c/0x270) [ 308.987749] [<00000349976ff95e>] rmqueue_bulk+0x71e/0x940 [ 308.987754] [<00000349976ffd7e>] __rmqueue_pcplist+0x1fe/0x2a0 [ 308.987759] [<0000034997700966>] rmqueue.isra.0+0xb46/0xf40 [ 308.987763] [<0000034997703ec8>] get_page_from_freelist+0x198/0x8d0 [ 308.987768] [<0000034997706fa8>] __alloc_frozen_pages_noprof+0x198/0x400 [ 308.987774] [<00000349977536f8>] alloc_pages_mpol+0xb8/0x220 [ 308.987781] [<0000034997753bf6>] folio_alloc_mpol_noprof+0x26/0xc0 [ 308.987786] [<0000034997753e4c>] vma_alloc_folio_noprof+0x6c/0xa0 [ 308.987791] [<0000034997775b22>] vma_alloc_anon_folio_pmd+0x42/0x240 [ 308.987799] [<000003499777bfea>] __do_huge_pmd_anonymous_page+0x3a/0x210 [ 308.987804] [<00000349976cb08e>] __handle_mm_fault+0x4de/0x500 [ 308.987809] [<00000349976cb14c>] handle_mm_fault+0x9c/0x3a0 [ 308.987813] [<000003499734d70e>] do_exception+0x1de/0x540 [ 308.987822] [<0000034998387390>] __do_pgm_check+0x130/0x220 [ 308.987830] [<000003499839a934>] pgm_check_handler+0x114/0x160 [ 308.987838] 3 locks held by mempig_verify/5224: [ 308.987842] #0: 0000023ea44c1e08 (vm_lock){++++}-{0:0}, at: lock_vma_under_rcu+0xb2/0x2a0 [ 308.987859] #1: 0000023ee4d41b18 (&pcp->lock){+.+.}-{2:2}, at: rmqueue.isra.0+0xad6/0xf40 [ 308.987871] #2: 0000023efe6c8998 (&zone->lock){..-.}-{2:2}, at: rmqueue_bulk+0x5a/0x940 [ 308.987886] Last Breaking-Event-Address: [ 308.987890] [<0000034997379096>] __warn_printk+0x136/0x140 [ 308.987897] irq event stamp: 52330356 [ 308.987901] hardirqs last enabled at (52330355): [<000003499838742e>] __do_pgm_check+0x1ce/0x220 [ 308.987907] hardirqs last disabled at (52330356): [<000003499839932e>] _raw_spin_lock_irqsave+0x9e/0xe0 [ 308.987913] softirqs last enabled at (52329882): [<0000034997383786>] handle_softirqs+0x2c6/0x530 [ 308.987922] softirqs last disabled at (52329859): [<0000034997382f86>] __irq_exit_rcu+0x126/0x140 [ 308.987929] ---[ end trace 0000000000000000 ]--- [ 308.987936] ------------[ cut here ]------------ [ 308.987940] page type is 0, passed migratetype is 1 (nr=256) [ 308.987951] WARNING: CPU: 1 PID: 5224 at mm/page_alloc.c:860 __del_page_from_free_list+0x1be/0x1e0 [ 308.987960] Modules linked in: algif_hash(E) af_alg(E) nft_fib_inet(E) nft_fib_ipv4(E) nft_fib_ipv6(E) nft_fib(E) nft_reject_inet(E) nf_reject_ipv4(E) nf_reject_ipv6(E) nft_reject(E) nft_ct(E) nft_chain_nat(E) nf_nat(E) nf_conntrack(E) nf_defrag_ipv6(E) nf_defrag_ipv4(E) nf_tables(E) s390_trng(E) vfio_ccw(E) mdev(E) vfio_iommu_type1(E) vfio(E) sch_fq_codel(E) drm(E) i2c_core(E) drm_panel_orientation_quirks(E) loop(E) nfnetlink(E) vsock_loopback(E) vmw_vsock_virtio_transport_common(E) vsock(E) ctcm(E) fsm(E) diag288_wdt(E) watchdog(E) zfcp(E) scsi_transport_fc(E) ghash_s390(E) prng(E) aes_s390(E) des_generic(E) des_s390(E) libdes(E) sha3_512_s390(E) sha3_256_s390(E) sha_common(E) paes_s390(E) crypto_engine(E) pkey_cca(E) pkey_ep11(E) zcrypt(E) rng_core(E) pkey_pckmo(E) pkey(E) autofs4(E) [ 308.988070] Unloaded tainted modules: hmac_s390(E):2 [ 308.988087] CPU: 1 UID: 0 PID: 5224 Comm: mempig_verify Kdump: loaded Tainted: G W E 6.18.0-gcc-bpf-debug #431 PREEMPT [ 308.988095] Tainted: [W]=WARN, [E]=UNSIGNED_MODULE [ 308.988100] Hardware name: IBM 3906 M04 704 (z/VM 7.3.0) [ 308.988105] Krnl PSW : 0404f00180000000 00000349976f9e32 (__del_page_from_free_list+0x1c2/0x1e0) [ 308.988118] R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:3 PM:0 RI:0 EA:3 [ 308.988127] Krnl GPRS: 0000034980000004 0000000000000005 0000000000000030 000003499a0e6d88 [ 308.988133] 0000000000000005 0000034980000005 0000034998d57290 0000023efe6c8300 [ 308.988139] 0000000000000001 0000000000000008 000002be00000100 000002be803ac000 [ 308.988144] 0000000000000000 0000000000000001 00000349976f9e2e 000002c99b1eb728 [ 308.988153] Krnl Code: 00000349976f9e22: c020008a06d9 larl %r2,000003499883abd4 00000349976f9e28: c0e5ffe3f89c brasl %r14,0000034997378f60 #00000349976f9e2e: af000000 mc 0,0 >00000349976f9e32: a7f4ff4e brc 15,00000349976f9cce 00000349976f9e36: b904002b lgr %r2,%r11 00000349976f9e3a: c030008a06e7 larl %r3,000003499883ac08 00000349976f9e40: c0e5fffdbac8 brasl %r14,00000349976b13d0 00000349976f9e46: af000000 mc 0,0 [ 308.988184] Call Trace: [ 308.988188] [<00000349976f9e32>] __del_page_from_free_list+0x1c2/0x1e0 [ 308.988195] ([<00000349976f9e2e>] __del_page_from_free_list+0x1be/0x1e0) [ 308.988202] [<00000349976ff946>] rmqueue_bulk+0x706/0x940 [ 308.988208] [<00000349976ffd7e>] __rmqueue_pcplist+0x1fe/0x2a0 [ 308.988214] [<0000034997700966>] rmqueue.isra.0+0xb46/0xf40 [ 308.988221] [<0000034997703ec8>] get_page_from_freelist+0x198/0x8d0 [ 308.988227] [<0000034997706fa8>] __alloc_frozen_pages_noprof+0x198/0x400 [ 308.988233] [<00000349977536f8>] alloc_pages_mpol+0xb8/0x220 [ 308.988240] [<0000034997753bf6>] folio_alloc_mpol_noprof+0x26/0xc0 [ 308.988247] [<0000034997753e4c>] vma_alloc_folio_noprof+0x6c/0xa0 [ 308.988253] [<0000034997775b22>] vma_alloc_anon_folio_pmd+0x42/0x240 [ 308.988260] [<000003499777bfea>] __do_huge_pmd_anonymous_page+0x3a/0x210 [ 308.988267] [<00000349976cb08e>] __handle_mm_fault+0x4de/0x500 [ 308.988273] [<00000349976cb14c>] handle_mm_fault+0x9c/0x3a0 [ 308.988279] [<000003499734d70e>] do_exception+0x1de/0x540 [ 308.988286] [<0000034998387390>] __do_pgm_check+0x130/0x220 [ 308.988293] [<000003499839a934>] pgm_check_handler+0x114/0x160 [ 308.988300] 3 locks held by mempig_verify/5224: [ 308.988305] #0: 0000023ea44c1e08 (vm_lock){++++}-{0:0}, at: lock_vma_under_rcu+0xb2/0x2a0 [ 308.988322] #1: 0000023ee4d41b18 (&pcp->lock){+.+.}-{2:2}, at: rmqueue.isra.0+0xad6/0xf40 [ 308.988334] #2: 0000023efe6c8998 (&zone->lock){..-.}-{2:2}, at: rmqueue_bulk+0x5a/0x940 [ 308.988346] Last Breaking-Event-Address: [ 308.988350] [<0000034997379096>] __warn_printk+0x136/0x140 [ 308.988356] irq event stamp: 52330356 [ 308.988360] hardirqs last enabled at (52330355): [<000003499838742e>] __do_pgm_check+0x1ce/0x220 [ 308.988366] hardirqs last disabled at (52330356): [<000003499839932e>] _raw_spin_lock_irqsave+0x9e/0xe0 [ 308.988373] softirqs last enabled at (52329882): [<0000034997383786>] handle_softirqs+0x2c6/0x530 [ 308.988380] softirqs last disabled at (52329859): [<0000034997382f86>] __irq_exit_rcu+0x126/0x140 [ 308.988388] ---[ end trace 0000000000000000 ]--- Link: https://lkml.kernel.org/r/20251215081002.3353900A9c-agordeev@linux.ibm.com Link: https://lkml.kernel.org/r/20251212151457.3898073Add-agordeev@linux.ibm.com Fixes: e6cf9e1c4cde ("mm: page_alloc: fix up block types when merging compatible blocks") Signed-off-by: Alexander Gordeev <agordeev(a)linux.ibm.com> Reported-by: Marc Hartmayer <mhartmay(a)linux.ibm.com> Closes: https://lore.kernel.org/linux-mm/87wmalyktd.fsf@linux.ibm.com/ Acked-by: Vlastimil Babka <vbabka(a)suse.cz> Acked-by: Johannes Weiner <hannes(a)cmpxchg.org> Reviewed-by: Wei Yang <richard.weiyang(a)gmail.com> Cc: Marc Hartmayer <mhartmay(a)linux.ibm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Conflicts: mm/page_allo.c [Context conflicts.] Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- mm/page_alloc.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b70a7f657853..2bc511aa784c 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -748,6 +748,17 @@ buddy_merge_likely(unsigned long pfn, unsigned long buddy_pfn, NULL) != NULL; } +static void change_pageblock_range(struct page *pageblock_page, + int start_order, int migratetype) +{ + int nr_pageblocks = 1 << (start_order - pageblock_order); + + while (nr_pageblocks--) { + set_pageblock_migratetype(pageblock_page, migratetype); + pageblock_page += pageblock_nr_pages; + } +} + /* * Freeing function for a buddy system allocator. * @@ -835,7 +846,7 @@ static inline void __free_one_page(struct page *page, * expand() down the line puts the sub-blocks * on the right freelists. */ - set_pageblock_migratetype(buddy, migratetype); + change_pageblock_range(buddy, order, migratetype); } combined_pfn = buddy_pfn & pfn; @@ -1813,17 +1824,6 @@ bool move_freepages_block_isolate(struct zone *zone, struct page *page, } #endif /* CONFIG_MEMORY_ISOLATION */ -static void change_pageblock_range(struct page *pageblock_page, - int start_order, int migratetype) -{ - int nr_pageblocks = 1 << (start_order - pageblock_order); - - while (nr_pageblocks--) { - set_pageblock_migratetype(pageblock_page, migratetype); - pageblock_page += pageblock_nr_pages; - } -} - /* * When we are falling back to another migratetype during allocation, should we * try to claim an entire block to satisfy further allocations, instead of -- 2.43.0

2 1

[PATCH OLK-6.6] libceph: make decode_pool() more resilient against corrupted osdmaps
by Jinjiang Tu 03 Feb '26

03 Feb '26

From: Ilya Dryomov <idryomov(a)gmail.com> stable inclusion from stable-v6.6.120 commit e927ab132b87ba3f076705fc2684d94b24201ed1 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13431 CVE: CVE-2025-71116 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 8c738512714e8c0aa18f8a10c072d5b01c83db39 upstream. If the osdmap is (maliciously) corrupted such that the encoded length of ceph_pg_pool envelope is less than what is expected for a particular encoding version, out-of-bounds reads may ensue because the only bounds check that is there is based on that length value. This patch adds explicit bounds checks for each field that is decoded or skipped. Cc: stable(a)vger.kernel.org Reported-by: ziming zhang <ezrakiez(a)gmail.com> Signed-off-by: Ilya Dryomov <idryomov(a)gmail.com> Reviewed-by: Xiubo Li <xiubli(a)redhat.com> Tested-by: ziming zhang <ezrakiez(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yuan can <yuancan(a)huawei.com> Signed-off-by: Jinjiang Tu <tujinjiang(a)huawei.com> --- net/ceph/osdmap.c | 116 +++++++++++++++++++++------------------------- 1 file changed, 52 insertions(+), 64 deletions(-) diff --git a/net/ceph/osdmap.c b/net/ceph/osdmap.c index 295098873861..b0a08a537012 100644 --- a/net/ceph/osdmap.c +++ b/net/ceph/osdmap.c @@ -806,51 +806,49 @@ static int decode_pool(void **p, void *end, struct ceph_pg_pool_info *pi) ceph_decode_need(p, end, len, bad); pool_end = *p + len; + ceph_decode_need(p, end, 4 + 4 + 4, bad); pi->type = ceph_decode_8(p); pi->size = ceph_decode_8(p); pi->crush_ruleset = ceph_decode_8(p); pi->object_hash = ceph_decode_8(p); - pi->pg_num = ceph_decode_32(p); pi->pgp_num = ceph_decode_32(p); - *p += 4 + 4; /* skip lpg* */ - *p += 4; /* skip last_change */ - *p += 8 + 4; /* skip snap_seq, snap_epoch */ + /* lpg*, last_change, snap_seq, snap_epoch */ + ceph_decode_skip_n(p, end, 8 + 4 + 8 + 4, bad); /* skip snaps */ - num = ceph_decode_32(p); + ceph_decode_32_safe(p, end, num, bad); while (num--) { - *p += 8; /* snapid key */ - *p += 1 + 1; /* versions */ - len = ceph_decode_32(p); - *p += len; + /* snapid key, pool snap (with versions) */ + ceph_decode_skip_n(p, end, 8 + 2, bad); + ceph_decode_skip_string(p, end, bad); } - /* skip removed_snaps */ - num = ceph_decode_32(p); - *p += num * (8 + 8); + /* removed_snaps */ + ceph_decode_skip_map(p, end, 64, 64, bad); + ceph_decode_need(p, end, 8 + 8 + 4, bad); *p += 8; /* skip auid */ pi->flags = ceph_decode_64(p); *p += 4; /* skip crash_replay_interval */ if (ev >= 7) - pi->min_size = ceph_decode_8(p); + ceph_decode_8_safe(p, end, pi->min_size, bad); else pi->min_size = pi->size - pi->size / 2; if (ev >= 8) - *p += 8 + 8; /* skip quota_max_* */ + /* quota_max_* */ + ceph_decode_skip_n(p, end, 8 + 8, bad); if (ev >= 9) { - /* skip tiers */ - num = ceph_decode_32(p); - *p += num * 8; + /* tiers */ + ceph_decode_skip_set(p, end, 64, bad); + ceph_decode_need(p, end, 8 + 1 + 8 + 8, bad); *p += 8; /* skip tier_of */ *p += 1; /* skip cache_mode */ - pi->read_tier = ceph_decode_64(p); pi->write_tier = ceph_decode_64(p); } else { @@ -858,86 +856,76 @@ static int decode_pool(void **p, void *end, struct ceph_pg_pool_info *pi) pi->write_tier = -1; } - if (ev >= 10) { - /* skip properties */ - num = ceph_decode_32(p); - while (num--) { - len = ceph_decode_32(p); - *p += len; /* key */ - len = ceph_decode_32(p); - *p += len; /* val */ - } - } + if (ev >= 10) + /* properties */ + ceph_decode_skip_map(p, end, string, string, bad); if (ev >= 11) { - /* skip hit_set_params */ - *p += 1 + 1; /* versions */ - len = ceph_decode_32(p); - *p += len; + /* hit_set_params (with versions) */ + ceph_decode_skip_n(p, end, 2, bad); + ceph_decode_skip_string(p, end, bad); - *p += 4; /* skip hit_set_period */ - *p += 4; /* skip hit_set_count */ + /* hit_set_period, hit_set_count */ + ceph_decode_skip_n(p, end, 4 + 4, bad); } if (ev >= 12) - *p += 4; /* skip stripe_width */ + /* stripe_width */ + ceph_decode_skip_32(p, end, bad); - if (ev >= 13) { - *p += 8; /* skip target_max_bytes */ - *p += 8; /* skip target_max_objects */ - *p += 4; /* skip cache_target_dirty_ratio_micro */ - *p += 4; /* skip cache_target_full_ratio_micro */ - *p += 4; /* skip cache_min_flush_age */ - *p += 4; /* skip cache_min_evict_age */ - } + if (ev >= 13) + /* target_max_*, cache_target_*, cache_min_* */ + ceph_decode_skip_n(p, end, 16 + 8 + 8, bad); - if (ev >= 14) { - /* skip erasure_code_profile */ - len = ceph_decode_32(p); - *p += len; - } + if (ev >= 14) + /* erasure_code_profile */ + ceph_decode_skip_string(p, end, bad); /* * last_force_op_resend_preluminous, will be overridden if the * map was encoded with RESEND_ON_SPLIT */ if (ev >= 15) - pi->last_force_request_resend = ceph_decode_32(p); + ceph_decode_32_safe(p, end, pi->last_force_request_resend, bad); else pi->last_force_request_resend = 0; if (ev >= 16) - *p += 4; /* skip min_read_recency_for_promote */ + /* min_read_recency_for_promote */ + ceph_decode_skip_32(p, end, bad); if (ev >= 17) - *p += 8; /* skip expected_num_objects */ + /* expected_num_objects */ + ceph_decode_skip_64(p, end, bad); if (ev >= 19) - *p += 4; /* skip cache_target_dirty_high_ratio_micro */ + /* cache_target_dirty_high_ratio_micro */ + ceph_decode_skip_32(p, end, bad); if (ev >= 20) - *p += 4; /* skip min_write_recency_for_promote */ + /* min_write_recency_for_promote */ + ceph_decode_skip_32(p, end, bad); if (ev >= 21) - *p += 1; /* skip use_gmt_hitset */ + /* use_gmt_hitset */ + ceph_decode_skip_8(p, end, bad); if (ev >= 22) - *p += 1; /* skip fast_read */ + /* fast_read */ + ceph_decode_skip_8(p, end, bad); - if (ev >= 23) { - *p += 4; /* skip hit_set_grade_decay_rate */ - *p += 4; /* skip hit_set_search_last_n */ - } + if (ev >= 23) + /* hit_set_grade_decay_rate, hit_set_search_last_n */ + ceph_decode_skip_n(p, end, 4 + 4, bad); if (ev >= 24) { - /* skip opts */ - *p += 1 + 1; /* versions */ - len = ceph_decode_32(p); - *p += len; + /* opts (with versions) */ + ceph_decode_skip_n(p, end, 2, bad); + ceph_decode_skip_string(p, end, bad); } if (ev >= 25) - pi->last_force_request_resend = ceph_decode_32(p); + ceph_decode_32_safe(p, end, pi->last_force_request_resend, bad); /* ignore the rest */ -- 2.43.0

2 1

[PATCH OLK-6.6 0/2] Fix NFS deadlock
by Li Lingfeng 03 Feb '26

03 Feb '26

Revert the patch from hulk and apply the one from mainline. Trond Myklebust (1): NFS: Fix a deadlock involving nfs_release_folio() Wang Zhaolong (1): Revert "[Huawei] Revert "NFS: fix up nfs_release_folio() to try to release the page"" fs/nfs/file.c | 11 +++++++++-- fs/nfs/nfstrace.h | 3 +++ fs/nfs/write.c | 33 +++++++++++++++++++++++++++++++++ include/linux/nfs_fs.h | 1 + 4 files changed, 46 insertions(+), 2 deletions(-) -- 2.52.0

2 3

[PATCH OLK-6.6 0/1] CVE-2025-68172
by Liu Mingrui 03 Feb '26

03 Feb '26

From: Mingrui Liu <liumingrui(a)huawei.com> CVE-2025-68172 Haotian Zhang (1): crypto: aspeed - fix double free caused by devm drivers/crypto/aspeed/aspeed-acry.c | 2 -- 1 file changed, 2 deletions(-) -- 2.34.1

2 2

[PATCH OLK-6.6 0/3] CVE-2025-39981 fixup
by Jiacheng Yu 03 Feb '26

03 Feb '26

*** BLURB HERE *** Luiz Augusto von Dentz (1): Bluetooth: MGMT: Fix possible UAFs Pavel Shpakovskiy (1): Bluetooth: hci_sync: fix set_local_name race condition Roman Smirnov (1): Bluetooth: mgmt: remove NULL check in mgmt_set_connectable_complete() include/net/bluetooth/hci_sync.h | 2 +- net/bluetooth/hci_sync.c | 6 +- net/bluetooth/mgmt.c | 261 ++++++++++++++++++++++--------- net/bluetooth/mgmt_util.c | 46 ++++++ net/bluetooth/mgmt_util.h | 3 + 5 files changed, 237 insertions(+), 81 deletions(-) -- 2.43.0

2 4

[PATCH OLK-6.6] net/mlx5: fw_tracer, Validate format string parameters
by Chen Ridong 02 Feb '26

02 Feb '26

From: Shay Drory <shayd(a)nvidia.com> stable inclusion from stable-v6.6.120 commit 8ac688c0e430dab19f6a9b70df94b1f635612c1a category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13368 CVE: CVE-2025-68816 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit b35966042d20b14e2d83330049f77deec5229749 ] Add validation for format string parameters in the firmware tracer to prevent potential security vulnerabilities and crashes from malformed format strings received from firmware. The firmware tracer receives format strings from the device firmware and uses them to format trace messages. Without proper validation, bad firmware could provide format strings with invalid format specifiers (e.g., %s, %p, %n) that could lead to crashes, or other undefined behavior. Add mlx5_tracer_validate_params() to validate that all format specifiers in trace strings are limited to safe integer/hex formats (%x, %d, %i, %u, %llx, %lx, etc.). Reject strings containing other format types that could be used to access arbitrary memory or cause crashes. Invalid format strings are added to the trace output for visibility with "BAD_FORMAT: " prefix. Fixes: 70dd6fdb8987 ("net/mlx5: FW tracer, parse traces and kernel tracing support") Signed-off-by: Shay Drory <shayd(a)nvidia.com> Reviewed-by: Moshe Shemesh <moshe(a)nvidia.com> Reported-by: Breno Leitao <leitao(a)debian.org> Closes: https://lore.kernel.org/netdev/hanz6rzrb2bqbplryjrakvkbmv4y5jlmtthnvi3thg5s… Signed-off-by: Tariq Toukan <tariqt(a)nvidia.com> Link: https://patch.msgid.link/1765284977-1363052-4-git-send-email-tariqt@nvidia.… Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Chen Ridong <chenridong(a)huawei.com> --- .../mellanox/mlx5/core/diag/fw_tracer.c | 83 ++++++++++++++++--- .../mellanox/mlx5/core/diag/fw_tracer.h | 1 + 2 files changed, 74 insertions(+), 10 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c index 85d3bfa0780c6..197c306d350bf 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.c @@ -33,6 +33,7 @@ #include "lib/eq.h" #include "fw_tracer.h" #include "fw_tracer_tracepoint.h" +#include <linux/ctype.h> static int mlx5_query_mtrc_caps(struct mlx5_fw_tracer *tracer) { @@ -358,6 +359,43 @@ static const char *VAL_PARM = "%llx"; static const char *REPLACE_64_VAL_PARM = "%x%x"; static const char *PARAM_CHAR = "%"; +static bool mlx5_is_valid_spec(const char *str) +{ + /* Parse format specifiers to find the actual type. + * Structure: %[flags][width][.precision][length]type + * Skip flags, width, precision & length. + */ + while (isdigit(*str) || *str == '#' || *str == '.' || *str == 'l') + str++; + + /* Check if it's a valid integer/hex specifier: + * Valid formats: %x, %d, %i, %u, etc. + */ + if (*str != 'x' && *str != 'X' && *str != 'd' && *str != 'i' && + *str != 'u' && *str != 'c') + return false; + + return true; +} + +static bool mlx5_tracer_validate_params(const char *str) +{ + const char *substr = str; + + if (!str) + return false; + + substr = strstr(substr, PARAM_CHAR); + while (substr) { + if (!mlx5_is_valid_spec(substr + 1)) + return false; + + substr = strstr(substr + 1, PARAM_CHAR); + } + + return true; +} + static int mlx5_tracer_message_hash(u32 message_id) { return jhash_1word(message_id, 0) & (MESSAGE_HASH_SIZE - 1); @@ -419,6 +457,10 @@ static int mlx5_tracer_get_num_of_params(char *str) char *substr, *pstr = str; int num_of_params = 0; + /* Validate that all parameters are valid before processing */ + if (!mlx5_tracer_validate_params(str)) + return -EINVAL; + /* replace %llx with %x%x */ substr = strstr(pstr, VAL_PARM); while (substr) { @@ -570,14 +612,17 @@ void mlx5_tracer_print_trace(struct tracer_string_format *str_frmt, { char tmp[512]; - snprintf(tmp, sizeof(tmp), str_frmt->string, - str_frmt->params[0], - str_frmt->params[1], - str_frmt->params[2], - str_frmt->params[3], - str_frmt->params[4], - str_frmt->params[5], - str_frmt->params[6]); + if (str_frmt->invalid_string) + snprintf(tmp, sizeof(tmp), "BAD_FORMAT: %s", str_frmt->string); + else + snprintf(tmp, sizeof(tmp), str_frmt->string, + str_frmt->params[0], + str_frmt->params[1], + str_frmt->params[2], + str_frmt->params[3], + str_frmt->params[4], + str_frmt->params[5], + str_frmt->params[6]); trace_mlx5_fw(dev->tracer, trace_timestamp, str_frmt->lost, str_frmt->event_id, tmp); @@ -609,6 +654,13 @@ static int mlx5_tracer_handle_raw_string(struct mlx5_fw_tracer *tracer, return 0; } +static void mlx5_tracer_handle_bad_format_string(struct mlx5_fw_tracer *tracer, + struct tracer_string_format *cur_string) +{ + cur_string->invalid_string = true; + list_add_tail(&cur_string->list, &tracer->ready_strings_list); +} + static int mlx5_tracer_handle_string_trace(struct mlx5_fw_tracer *tracer, struct tracer_event *tracer_event) { @@ -619,12 +671,18 @@ static int mlx5_tracer_handle_string_trace(struct mlx5_fw_tracer *tracer, if (!cur_string) return mlx5_tracer_handle_raw_string(tracer, tracer_event); - cur_string->num_of_params = mlx5_tracer_get_num_of_params(cur_string->string); - cur_string->last_param_num = 0; cur_string->event_id = tracer_event->event_id; cur_string->tmsn = tracer_event->string_event.tmsn; cur_string->timestamp = tracer_event->string_event.timestamp; cur_string->lost = tracer_event->lost_event; + cur_string->last_param_num = 0; + cur_string->num_of_params = mlx5_tracer_get_num_of_params(cur_string->string); + if (cur_string->num_of_params < 0) { + pr_debug("%s Invalid format string parameters\n", + __func__); + mlx5_tracer_handle_bad_format_string(tracer, cur_string); + return 0; + } if (cur_string->num_of_params == 0) /* trace with no params */ list_add_tail(&cur_string->list, &tracer->ready_strings_list); } else { @@ -634,6 +692,11 @@ static int mlx5_tracer_handle_string_trace(struct mlx5_fw_tracer *tracer, __func__, tracer_event->string_event.tmsn); return mlx5_tracer_handle_raw_string(tracer, tracer_event); } + if (cur_string->num_of_params < 0) { + pr_debug("%s string parameter of invalid string, dumping\n", + __func__); + return 0; + } cur_string->last_param_num += 1; if (cur_string->last_param_num > TRACER_MAX_PARAMS) { pr_debug("%s Number of params exceeds the max (%d)\n", diff --git a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.h b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.h index 5c548bb74f07b..30d0bcba88479 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.h +++ b/drivers/net/ethernet/mellanox/mlx5/core/diag/fw_tracer.h @@ -125,6 +125,7 @@ struct tracer_string_format { struct list_head list; u32 timestamp; bool lost; + bool invalid_string; }; enum mlx5_fw_tracer_ownership_state { -- 2.34.1

2 1

[PATCH OLK-5.10 0/2] CVE-2022-50616
by Liu Mingrui 02 Feb '26

02 Feb '26

From: Mingrui Liu <liumingrui(a)huawei.com> CVE-2022-50616 ChiYuan Huang (2): regulator: core: Use different devices for resource allocation and DT lookup regulator: core: Fix resolve supply lookup issue drivers/regulator/core.c | 10 +++++----- drivers/regulator/devres.c | 2 +- drivers/regulator/dummy.c | 2 +- drivers/regulator/of_regulator.c | 2 +- drivers/regulator/stm32-vrefbuf.c | 2 +- drivers/staging/hikey9xx/hi6421v600-regulator.c | 2 +- include/linux/regulator/driver.h | 3 ++- 7 files changed, 12 insertions(+), 11 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 1/1] crypto: aspeed - fix double free caused by devm
by Liu Mingrui 02 Feb '26

02 Feb '26

From: Haotian Zhang <vulab(a)iscas.ac.cn> stable inclusion from stable-v6.6.117 commit 0dd6474ced33489076e6c0f3fe5077bf12e85b28 category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/8287 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 3c9bf72cc1ced1297b235f9422d62b613a3fdae9 ] The clock obtained via devm_clk_get_enabled() is automatically managed by devres and will be disabled and freed on driver detach. Manually calling clk_disable_unprepare() in error path and remove function causes double free. Remove the manual clock cleanup in both aspeed_acry_probe()'s error path and aspeed_acry_remove(). Fixes: 2f1cf4e50c95 ("crypto: aspeed - Add ACRY RSA driver") Signed-off-by: Haotian Zhang <vulab(a)iscas.ac.cn> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> Signed-off-by: Mingrui Liu <liumingrui(a)huawei.com> --- drivers/crypto/aspeed/aspeed-acry.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/crypto/aspeed/aspeed-acry.c b/drivers/crypto/aspeed/aspeed-acry.c index 247c568aa8df..64facdfaff2a 100644 --- a/drivers/crypto/aspeed/aspeed-acry.c +++ b/drivers/crypto/aspeed/aspeed-acry.c @@ -789,7 +789,6 @@ static int aspeed_acry_probe(struct platform_device *pdev) err_engine_rsa_start: crypto_engine_exit(acry_dev->crypt_engine_rsa); clk_exit: - clk_disable_unprepare(acry_dev->clk); return rc; } @@ -801,7 +800,6 @@ static int aspeed_acry_remove(struct platform_device *pdev) aspeed_acry_unregister(acry_dev); crypto_engine_exit(acry_dev->crypt_engine_rsa); tasklet_kill(&acry_dev->done_task); - clk_disable_unprepare(acry_dev->clk); return 0; } -- 2.34.1

2 1

[PATCH OLK-5.10 0/4] CVE-2025-39744 fixup
by Jiacheng Yu 02 Feb '26

02 Feb '26

*** BLURB HERE *** Frederic Weisbecker (1): rcu: Fix racy re-initialization of irq_work causing hangs Joel Fernandes (1): rcu: Fix rcu_read_unlock() deadloop due to IRQ work Paul E. McKenney (1): rcu: Protect ->defer_qs_iw_pending from data race Zqiang (1): rcu: Use IRQ_WORK_INIT_HARD() to avoid rcu_read_unlock() hangs kernel/rcu/tree.c | 1 + kernel/rcu/tree.h | 14 +++++++++++++- kernel/rcu/tree_plugin.h | 39 +++++++++++++++++++++++++++++++++------ 3 files changed, 47 insertions(+), 7 deletions(-) -- 2.43.0

2 5

[PATCH OLK-6.6 0/3] CVE-2025-39744 fixup
by Jiacheng Yu 02 Feb '26

02 Feb '26

*** BLURB HERE *** Frederic Weisbecker (1): rcu: Fix racy re-initialization of irq_work causing hangs Joel Fernandes (1): rcu: Fix rcu_read_unlock() deadloop due to IRQ work Paul E. McKenney (1): rcu: Protect ->defer_qs_iw_pending from data race kernel/rcu/tree.c | 2 ++ kernel/rcu/tree.h | 14 ++++++++++++- kernel/rcu/tree_plugin.h | 44 ++++++++++++++++++++++++++++++---------- 3 files changed, 48 insertions(+), 12 deletions(-) -- 2.43.0

2 4

[PATCH OLK-5.10 0/2] CVE-2022-50616
by Liu Mingrui 02 Feb '26

02 Feb '26

From: Mingrui Liu <liumingrui(a)huawei.com> CVE-2022-50616 ChiYuan Huang (2): regulator: core: Use different devices for resource allocation and DT lookup regulator: core: Fix resolve supply lookup issue drivers/regulator/core.c | 10 +++++----- drivers/regulator/devres.c | 2 +- drivers/regulator/dummy.c | 2 +- drivers/regulator/of_regulator.c | 2 +- drivers/regulator/stm32-vrefbuf.c | 2 +- drivers/staging/hikey9xx/hi6421v600-regulator.c | 2 +- include/linux/regulator/driver.h | 3 ++- 7 files changed, 12 insertions(+), 11 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6] Bluetooth: bcsp: receive data only if registered
by Yin Tirui 02 Feb '26

02 Feb '26

From: Ivan Pravdin <ipravdin.official(a)gmail.com> stable inclusion from stable-v6.6.117 commit 799cd62cbcc3f12ee04b33ef390ff7d41c37d671 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/11320 CVE: CVE-2025-40308 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit ca94b2b036c22556c3a66f1b80f490882deef7a6 ] Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. Reported-by: syzbot+4ed6852d4da4606c93da(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da Tested-by: syzbot+4ed6852d4da4606c93da(a)syzkaller.appspotmail.com Signed-off-by: Ivan Pravdin <ipravdin.official(a)gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yin Tirui <yintirui(a)huawei.com> --- drivers/bluetooth/hci_bcsp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 2a5a27d713f8..e991d9e62486 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -582,6 +582,9 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count) struct bcsp_struct *bcsp = hu->priv; const unsigned char *ptr; + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + BT_DBG("hu %p count %d rx_state %d rx_count %ld", hu, count, bcsp->rx_state, bcsp->rx_count); -- 2.43.0

2 1

[PATCH OLK-6.6] Bluetooth: bcsp: receive data only if registered
by Yin Tirui 02 Feb '26

02 Feb '26

From: Ivan Pravdin <ipravdin.official(a)gmail.com> stable inclusion from stable-v6.6.117 commit 799cd62cbcc3f12ee04b33ef390ff7d41c37d671 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IDBAE0 CVE: CVE-2025-40308 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit ca94b2b036c22556c3a66f1b80f490882deef7a6 ] Currently, bcsp_recv() can be called even when the BCSP protocol has not been registered. This leads to a NULL pointer dereference, as shown in the following stack trace: KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f] RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590 Call Trace: <TASK> hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627 tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290 tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f To prevent this, ensure that the HCI_UART_REGISTERED flag is set before processing received data. If the protocol is not registered, return -EUNATCH. Reported-by: syzbot+4ed6852d4da4606c93da(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=4ed6852d4da4606c93da Tested-by: syzbot+4ed6852d4da4606c93da(a)syzkaller.appspotmail.com Signed-off-by: Ivan Pravdin <ipravdin.official(a)gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz(a)intel.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yin Tirui <yintirui(a)huawei.com> --- drivers/bluetooth/hci_bcsp.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c index 2a5a27d713f8..e991d9e62486 100644 --- a/drivers/bluetooth/hci_bcsp.c +++ b/drivers/bluetooth/hci_bcsp.c @@ -582,6 +582,9 @@ static int bcsp_recv(struct hci_uart *hu, const void *data, int count) struct bcsp_struct *bcsp = hu->priv; const unsigned char *ptr; + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + BT_DBG("hu %p count %d rx_state %d rx_count %ld", hu, count, bcsp->rx_state, bcsp->rx_count); -- 2.43.0

2 1

[PATCH OLK-6.6] XSched: Update XSched manual
by Liu Kai 02 Feb '26

02 Feb '26

hulk inclusion category: doc bugzilla: https://atomgit.com/openeuler/kernel/issues/8423 -------------------------------- Update the patch link Signed-off-by: Liu Kai <liukai284(a)huawei.com> --- Documentation/scheduler/xsched.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Documentation/scheduler/xsched.md b/Documentation/scheduler/xsched.md index 89ef01d42fc0..11dc0c964e0a 100644 --- a/Documentation/scheduler/xsched.md +++ b/Documentation/scheduler/xsched.md @@ -84,7 +84,7 @@ mkdir <new_driver_dir> ./Ascend-hdk-910b-npu-driver_xx.x.x_linux-aarch64.run --tar -xvf -C <new_driver_dir> ``` -下载驱动补丁 [XSched driver patch](https://gitee.com/openeuler/kernel/commit/8d50448f11b697a177b63d3ccb… 适配 NPU 驱动 +下载驱动补丁 [XSched driver patch](https://gitcode.com/openeuler/kernel/commit/58e645cf8fd8d96573b70153… 适配 NPU 驱动 ```shell cp 0001-Adapt-910b-npu-driver-for-xsched.patch <new_driver_dir>/driver/kernel/ @@ -94,8 +94,10 @@ cd <new_driver_dir>/driver/kernel/ git init git add . git commit -m "npu init" +# 使用下载的 patch 文件 +git am 58e645cf8fd8d96573b7015385bf52522ebfee67.patch --reject # 如果有冲突则根据 .rej 文件适配冲突代码 -git am 0001-Adapt-910b-npu-driver-for-xsched.patch --reject +git am drivers/xcu/0001-Adapt-910_93-npu-driver-for-xsched.txt --reject ``` #### 1.3.2 替换驱动 -- 2.34.1

2 1

[PATCH OLK-6.6 0/3] adapt LTS patch 5ba723cc37230e616fe47ec19d441ba3168b4c4c
by Quanmin Yan 02 Feb '26

02 Feb '26

The original LTS patch is incompatible with the atomic mode of the mm counter. Therefore, the patch needs to be reverted and adapted again. Baolin Wang (1): mm: fix the inaccurate memory statistics issue for users Quanmin Yan (2): Revert "mm: fix the inaccurate memory statistics issue for users" mm: add config option for atomic mode in mm counter arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/mm.h | 53 ++++++++++++++++++++------ include/trace/events/kmem.h | 2 +- kernel/fork.c | 26 ++++++++++--- mm/Kconfig | 12 ++++++ 6 files changed, 78 insertions(+), 17 deletions(-) -- 2.43.0

2 4

[PATCH OLK-6.6] arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
by Wang Wensheng 02 Feb '26

02 Feb '26

From: Kaushlendra Kumar <kaushlendra.kumar(a)intel.com> stable inclusion from stable-v6.6.115 commit 3373f263bb647fcc3b5237cfaef757633b9ee25e category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/11599 CVE: CVE-2025-40346 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 2eead19334516c8e9927c11b448fbe512b1f18a1 upstream. Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity() which causes the code to proceed with NULL clock pointers. The current logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both valid pointers and NULL, leading to potential NULL pointer dereference in clk_get_rate(). Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns: "The error code within @ptr if it is an error pointer; 0 otherwise." This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed) when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be called when of_clk_get() returns NULL. Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid pointers, preventing potential NULL pointer dereference in clk_get_rate(). Cc: stable <stable(a)kernel.org> Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar(a)intel.com> Reviewed-by: Sudeep Holla <sudeep.holla(a)arm.com> Fixes: b8fe128dad8f ("arch_topology: Adjust initial CPU capacities with current freq") Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.c… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Wang Hai <wanghai38(a)huawei.com> --- drivers/base/arch_topology.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c index 998aefb44315..14aade8b591d 100644 --- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -347,7 +347,7 @@ bool __init topology_parse_cpu_capacity(struct device_node *cpu_node, int cpu) * frequency (by keeping the initial capacity_freq_ref value). */ cpu_clk = of_clk_get(cpu_node, 0); - if (!PTR_ERR_OR_ZERO(cpu_clk)) { + if (!IS_ERR_OR_NULL(cpu_clk)) { per_cpu(capacity_freq_ref, cpu) = clk_get_rate(cpu_clk) / HZ_PER_KHZ; clk_put(cpu_clk); -- 2.22.0

2 1

[PATCH OLK-6.6] drm/sched: Fix potential double free in drm_sched_job_add_resv_dependencies
by Wang Wensheng 02 Feb '26

02 Feb '26

From: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> stable inclusion from stable-v6.6.114 commit 57239762aa90ad768dac055021f27705dae73344 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/12320 CVE: CVE-2025-40096 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 5801e65206b065b0b2af032f7f1eef222aa2fd83 upstream. When adding dependencies with drm_sched_job_add_dependency(), that function consumes the fence reference both on success and failure, so in the latter case the dma_fence_put() on the error path (xarray failed to expand) is a double free. Interestingly this bug appears to have been present ever since commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code back then looked like this: drm_sched_job_add_implicit_dependencies(): ... for (i = 0; i < fence_count; i++) { ret = drm_sched_job_add_dependency(job, fences[i]); if (ret) break; } for (; i < fence_count; i++) dma_fence_put(fences[i]); Which means for the failing 'i' the dma_fence_put was already a double free. Possibly there were no users at that time, or the test cases were insufficient to hit it. The bug was then only noticed and fixed after commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2") landed, with its fixup of commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies"). At that point it was a slightly different flavour of a double free, which commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") noticed and attempted to fix. But it only moved the double free from happening inside the drm_sched_job_add_dependency(), when releasing the reference not yet obtained, to the caller, when releasing the reference already released by the former in the failure case. As such it is not easy to identify the right target for the fixes tag so lets keep it simple and just continue the chain. While fixing we also improve the comment and explain the reason for taking the reference and not dropping it. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin(a)igalia.com> Fixes: 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder") Reported-by: Dan Carpenter <dan.carpenter(a)linaro.org> Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/ Cc: Christian König <christian.koenig(a)amd.com> Cc: Rob Clark <robdclark(a)chromium.org> Cc: Daniel Vetter <daniel.vetter(a)ffwll.ch> Cc: Matthew Brost <matthew.brost(a)intel.com> Cc: Danilo Krummrich <dakr(a)kernel.org> Cc: Philipp Stanner <phasta(a)kernel.org> Cc: Christian König <ckoenig.leichtzumerken(a)gmail.com> Cc: dri-devel(a)lists.freedesktop.org Cc: stable(a)vger.kernel.org # v5.16+ Signed-off-by: Philipp Stanner <phasta(a)kernel.org> Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> --- drivers/gpu/drm/scheduler/sched_main.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/scheduler/sched_main.c b/drivers/gpu/drm/scheduler/sched_main.c index fa4652f23471..4faa2108c0a7 100644 --- a/drivers/gpu/drm/scheduler/sched_main.c +++ b/drivers/gpu/drm/scheduler/sched_main.c @@ -783,13 +783,14 @@ int drm_sched_job_add_resv_dependencies(struct drm_sched_job *job, dma_resv_assert_held(resv); dma_resv_for_each_fence(&cursor, resv, usage, fence) { - /* Make sure to grab an additional ref on the added fence */ - dma_fence_get(fence); - ret = drm_sched_job_add_dependency(job, fence); - if (ret) { - dma_fence_put(fence); + /* + * As drm_sched_job_add_dependency always consumes the fence + * reference (even when it fails), and dma_resv_for_each_fence + * is not obtaining one, we need to grab one before calling. + */ + ret = drm_sched_job_add_dependency(job, dma_fence_get(fence)); + if (ret) return ret; - } } return 0; } -- 2.22.0

2 1

[PATCH OLK-6.6] iommu/amd: Avoid stack buffer overflow from kernel cmdline
by Wang Wensheng 02 Feb '26

02 Feb '26

From: Kees Cook <kees(a)kernel.org> stable inclusion from stable-v6.6.103 commit 8f80c633cba144f721d38d9380f23d23ab7db10e category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/9098 CVE: CVE-2025-38676 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 8503d0fcb1086a7cfe26df67ca4bd9bd9e99bdec ] While the kernel command line is considered trusted in most environments, avoid writing 1 byte past the end of "acpiid" if the "str" argument is maximum length. Reported-by: Simcha Kosman <simcha.kosman(a)cyberark.com> Closes: https://lore.kernel.org/all/AS8P193MB2271C4B24BCEDA31830F37AE84A52@AS8P193M… Fixes: b6b26d86c61c ("iommu/amd: Add a length limitation for the ivrs_acpihid command-line parameter") Signed-off-by: Kees Cook <kees(a)kernel.org> Reviewed-by: Ankit Soni <Ankit.Soni(a)amd.com> Link: https://lore.kernel.org/r/20250804154023.work.970-kees@kernel.org Signed-off-by: Joerg Roedel <joerg.roedel(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> --- drivers/iommu/amd/init.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c index e3d4a23b66fd..090b88a4b1e3 100644 --- a/drivers/iommu/amd/init.c +++ b/drivers/iommu/amd/init.c @@ -3633,7 +3633,7 @@ static int __init parse_ivrs_acpihid(char *str) { u32 seg = 0, bus, dev, fn; char *hid, *uid, *p, *addr; - char acpiid[ACPIID_LEN] = {0}; + char acpiid[ACPIID_LEN + 1] = { }; /* size with NULL terminator */ int i; addr = strchr(str, '@'); @@ -3659,7 +3659,7 @@ static int __init parse_ivrs_acpihid(char *str) /* We have the '@', make it the terminator to get just the acpiid */ *addr++ = 0; - if (strlen(str) > ACPIID_LEN + 1) + if (strlen(str) > ACPIID_LEN) goto not_found; if (sscanf(str, "=%s", acpiid) != 1) -- 2.22.0

2 1

[PATCH OLK-6.6] HID: core: Harden s32ton() against conversion to 0 bits
by Wang Wensheng 02 Feb '26

02 Feb '26

From: Alan Stern <stern(a)rowland.harvard.edu> mainline inclusion from mainline-v6.17-rc1 commit a6b87bfc2ab5bccb7ad953693c85d9062aef3fdd category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/9186 CVE: CVE-2025-38556 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- Testing by the syzbot fuzzer showed that the HID core gets a shift-out-of-bounds exception when it tries to convert a 32-bit quantity to a 0-bit quantity. Ideally this should never occur, but there are buggy devices and some might have a report field with size set to zero; we shouldn't reject the report or the device just because of that. Instead, harden the s32ton() routine so that it returns a reasonable result instead of crashing when it is called with the number of bits set to 0 -- the same as what snto32() does. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-by: syzbot+b63d677d63bcac06cf90(a)syzkaller.appspotmail.com Closes: https://lore.kernel.org/linux-usb/68753a08.050a0220.33d347.0008.GAE@google.… Tested-by: syzbot+b63d677d63bcac06cf90(a)syzkaller.appspotmail.com Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split") Cc: stable(a)vger.kernel.org Link: https://patch.msgid.link/613a66cd-4309-4bce-a4f7-2905f9bce0c9@rowland.harva… Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> Conflicts: drivers/hid/hid-core.c [Only context conflict because of commit c653ffc283404 is not applied] Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> --- drivers/hid/hid-core.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 266cd56dec50..d8fda282d049 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1351,7 +1351,12 @@ EXPORT_SYMBOL_GPL(hid_snto32); static u32 s32ton(__s32 value, unsigned n) { - s32 a = value >> (n - 1); + s32 a; + + if (!value || !n) + return 0; + + a = value >> (n - 1); if (a && a != -1) return value < 0 ? 1 << (n - 1) : (1 << (n - 1)) - 1; return value & ((1 << n) - 1); -- 2.22.0

2 1

[PATCH OLK-6.6] iommu: Fix two issues in iommu_copy_struct_from_user()
by Wang Wensheng 02 Feb '26

02 Feb '26

From: Nicolin Chen <nicolinc(a)nvidia.com> mainline inclusion from mainline-v6.15-rc5 commit 30a3f2f3e4bd6335b727c83c08a982d969752bc1 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/10084 CVE: CVE-2025-37900 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- In the review for iommu_copy_struct_to_user() helper, Matt pointed out that a NULL pointer should be rejected prior to dereferencing it: https://lore.kernel.org/all/86881827-8E2D-461C-BDA3-FA8FD14C343C@nvidia.com And Alok pointed out a typo at the same time: https://lore.kernel.org/all/480536af-6830-43ce-a327-adbd13dc3f1d@oracle.com Since both issues were copied from iommu_copy_struct_from_user(), fix them first in the current header. Fixes: e9d36c07bb78 ("iommu: Add iommu_copy_struct_from_user helper") Cc: stable(a)vger.kernel.org Signed-off-by: Nicolin Chen <nicolinc(a)nvidia.com> Reviewed-by: Kevin Tian <kevin.tian(a)intel.com> Acked-by: Alok Tiwari <alok.a.tiwari(a)oracle.com> Reviewed-by: Matthew R. Ochs <mochs(a)nvidia.com> Link: https://lore.kernel.org/r/20250414191635.450472-1-nicolinc@nvidia.com Signed-off-by: Joerg Roedel <jroedel(a)suse.de> Signed-off-by: Wang Wensheng <wangwensheng4(a)huawei.com> --- include/linux/iommu.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/include/linux/iommu.h b/include/linux/iommu.h index ceecbc5ba759..974c3b94365f 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -517,10 +517,10 @@ static inline int __iommu_copy_struct_from_user( void *dst_data, const struct iommu_user_data *src_data, unsigned int data_type, size_t data_len, size_t min_len) { - if (src_data->type != data_type) - return -EINVAL; if (WARN_ON(!dst_data || !src_data)) return -EINVAL; + if (src_data->type != data_type) + return -EINVAL; if (src_data->len < min_len || data_len < src_data->len) return -EINVAL; return copy_struct_from_user(dst_data, data_len, src_data->uptr, @@ -533,8 +533,8 @@ static inline int __iommu_copy_struct_from_user( * include/uapi/linux/iommufd.h * @user_data: Pointer to a struct iommu_user_data for user space data info * @data_type: The data type of the @kdst. Must match with @user_data->type - * @min_last: The last memember of the data structure @kdst points in the - * initial version. + * @min_last: The last member of the data structure @kdst points in the initial + * version. * Return 0 for success, otherwise -error. */ #define iommu_copy_struct_from_user(kdst, user_data, data_type, min_last) \ -- 2.22.0

2 1

[PATCH OLK-6.6] scsi: leapraid: add RAID disk hide/show events and fix misc issues
by haodongdong 02 Feb '26

02 Feb '26

LeapIO inclusion category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8462 ------------------------------------------ This change introduces RAID disk hide/show events to allow dynamic visibility control of RAID devices. It also updates the MSI-X vector count retrieval logic and unifies driver naming from LeapRaid to LeapRAID for consistency. In addition, fix an issue where the fw_log workqueue was not properly released during system shutdown, which could lead to resource leaks. Signed-off-by: haodongdong <doubled(a)leap-io.com> --- drivers/scsi/leapraid/leapraid.h | 2 + drivers/scsi/leapraid/leapraid_func.c | 104 ++++++++++++++++++++++---- drivers/scsi/leapraid/leapraid_func.h | 47 ++++++------ drivers/scsi/leapraid/leapraid_os.c | 2 +- 4 files changed, 116 insertions(+), 39 deletions(-) diff --git a/drivers/scsi/leapraid/leapraid.h b/drivers/scsi/leapraid/leapraid.h index 842810d41542..77bb93b79254 100644 --- a/drivers/scsi/leapraid/leapraid.h +++ b/drivers/scsi/leapraid/leapraid.h @@ -310,6 +310,8 @@ #define LEAPRAID_EVT_IR_RC_PD_UNHIDDEN_TO_DELETE 0x04 #define LEAPRAID_EVT_IR_RC_PD_CREATED_TO_HIDE 0x05 #define LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE 0x06 +#define LEAPRAID_EVT_IR_RC_VOLUME_HIDE 0x0A +#define LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE 0x0B /* sas topology change event */ #define LEAPRAID_EVT_SAS_TOPO_ES_NO_EXPANDER 0x00 diff --git a/drivers/scsi/leapraid/leapraid_func.c b/drivers/scsi/leapraid/leapraid_func.c index 2fc142fff982..ad8aee40e2c1 100644 --- a/drivers/scsi/leapraid/leapraid_func.c +++ b/drivers/scsi/leapraid/leapraid_func.c @@ -4132,6 +4132,66 @@ static void leapraid_sas_pd_expose( } } +static void leapraid_sas_vol_visibility(struct leapraid_adapter *adapter, + struct leapraid_evt_data_ir_change *evt_data) +{ + struct leapraid_raid_volume *raid_volume = NULL; + struct scsi_device *sdev = NULL; + u16 hdl = 0; + unsigned long flags; + u8 rc = 0; + u8 reprobe_flg = 0; + + hdl = le16_to_cpu(evt_data->vol_dev_hdl); + rc = evt_data->reason_code; + spin_lock_irqsave(&adapter->dev_topo.raid_volume_lock, flags); + raid_volume = leapraid_raid_volume_find_by_hdl(adapter, hdl); + if (!raid_volume) { + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, + flags); + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x not found\n", + __func__, __LINE__, hdl); + return; + } + + reprobe_flg = 0; + sdev = raid_volume->sdev; + if (sdev) { + if (sdev->no_uld_attach) { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE) { + sdev->no_uld_attach = 0; + reprobe_flg = 1; + } + } else { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_HIDE) { + sdev->no_uld_attach = 1; + reprobe_flg = 1; + } + } + + if (reprobe_flg) { + if (sdev->no_uld_attach) + sdev_printk(KERN_INFO, sdev, "hide vol\n"); + else + sdev_printk(KERN_INFO, sdev, "unhide vol\n"); + + WARN_ON(scsi_device_reprobe(sdev)); + } else { + dev_warn(&adapter->pdev->dev, + "%s:rc(0x%x):request matches, skipping.\n", + __func__, rc); + } + + } else { + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x has no sdev\n", + __func__, __LINE__, hdl); + } + + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, flags); +} + static void leapraid_sas_volume_add(struct leapraid_adapter *adapter, struct leapraid_evt_data_ir_change *evt_data) { @@ -4250,6 +4310,10 @@ static void leapraid_sas_ir_chg_evt(struct leapraid_adapter *adapter, case LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE: leapraid_sas_pd_expose(adapter, evt_data); break; + case LEAPRAID_EVT_IR_RC_VOLUME_HIDE: + case LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE: + leapraid_sas_vol_visibility(adapter, evt_data); + break; default: break; } @@ -6397,6 +6461,8 @@ static int leapraid_get_adapter_features(struct leapraid_adapter *adapter) le16_to_cpu(leap_mpi_rep.hp_slot); adapter->adapter_attr.features.adapter_caps = le32_to_cpu(leap_mpi_rep.adapter_caps); + adapter->adapter_attr.features.max_msix_vectors = + leap_mpi_rep.max_msix_vectors; adapter->adapter_attr.features.max_volumes = leap_mpi_rep.max_volumes; if (!adapter->adapter_attr.features.max_volumes) @@ -6754,11 +6820,15 @@ static int leapraid_set_msix(struct leapraid_adapter *adapter) goto legacy_int; msix_cnt = leapraid_msix_cnt(adapter->pdev); - if (msix_cnt <= 0) { + if (msix_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { dev_info(&adapter->pdev->dev, "msix unsupported!\n"); goto legacy_int; } + msix_cnt = min_t(int, msix_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -6859,11 +6929,15 @@ static int leapraid_set_msi(struct leapraid_adapter *adapter) goto legacy_int1; msi_cnt = leapraid_msi_cnt(adapter->pdev); - if (msi_cnt <= 0) { - dev_info(&adapter->pdev->dev, "msix unsupported!\n"); + if (msi_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { + dev_info(&adapter->pdev->dev, "msi unsupported!\n"); goto legacy_int1; } + msi_cnt = min_t(int, msi_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -7015,6 +7089,18 @@ int leapraid_set_pcie_and_notification(struct leapraid_adapter *adapter) leapraid_mask_int(adapter); + rc = leapraid_make_adapter_ready(adapter, PART_RESET); + if (rc) { + dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); + goto out_fail; + } + + rc = leapraid_get_adapter_features(adapter); + if (rc) { + dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); + goto out_fail; + } + rc = leapraid_set_notification(adapter); if (rc) goto out_fail; @@ -8185,18 +8271,6 @@ int leapraid_ctrl_init(struct leapraid_adapter *adapter) PCI_EXP_DEVCTL_EXT_TAG); } - rc = leapraid_make_adapter_ready(adapter, PART_RESET); - if (rc) { - dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); - goto out_free_resources; - } - - rc = leapraid_get_adapter_features(adapter); - if (rc) { - dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); - goto out_free_resources; - } - rc = leapraid_fw_log_init(adapter); if (rc) { dev_err(&adapter->pdev->dev, "fw log init failure\n"); diff --git a/drivers/scsi/leapraid/leapraid_func.h b/drivers/scsi/leapraid/leapraid_func.h index 2c51ef359b7e..f7072d078315 100644 --- a/drivers/scsi/leapraid/leapraid_func.h +++ b/drivers/scsi/leapraid/leapraid_func.h @@ -46,15 +46,15 @@ #define LEAPRAID_SYS_LOG_BUF_RESERVE 0x1000 /* Driver version and name */ -#define LEAPRAID_DRIVER_NAME "LeapRaid" +#define LEAPRAID_DRIVER_NAME "LeapRAID" #define LEAPRAID_NAME_LENGTH 48 #define LEAPRAID_AUTHOR "LeapIO Inc." -#define LEAPRAID_DESCRIPTION "LeapRaid Driver" -#define LEAPRAID_DRIVER_VERSION "2.00.00.05" +#define LEAPRAID_DESCRIPTION "LeapRAID Driver" +#define LEAPRAID_DRIVER_VERSION "2.00.00.06" #define LEAPRAID_MAJOR_VERSION 2 #define LEAPRAID_MINOR_VERSION 00 #define LEAPRAID_BUILD_VERSION 00 -#define LEAPRAID_RELEASE_VERSION 05 +#define LEAPRAID_RELEASE_VERSION 06 /* Device ID */ #define LEAPRAID_VENDOR_ID 0xD405 @@ -243,6 +243,7 @@ struct leapraid_adapter_features { u16 hp_slot; u32 adapter_caps; u32 fw_version; + u8 max_msix_vectors; u8 max_volumes; u16 max_dev_handle; u16 min_dev_handle; @@ -349,7 +350,7 @@ struct leapraid_rep_desc_seg_maint { }; /** - * struct leapraid_mem_desc - Memory descriptor for LeapRaid adapter + * struct leapraid_mem_desc - Memory descriptor for LeapRAID adapter * * @task_desc: Pointer to task descriptor * @task_desc_dma: DMA address of task descriptor @@ -395,7 +396,7 @@ struct leapraid_mem_desc { #define LEAPRAID_CMD_RESET 0x0008 /** - * enum LEAPRAID_CB_INDEX - Callback index for LeapRaid driver + * enum LEAPRAID_CB_INDEX - Callback index for LeapRAID driver * * @LEAPRAID_SCAN_DEV_CB_IDX: Scan device callback index * @LEAPRAID_CONFIG_CB_IDX: Configuration callback index @@ -513,7 +514,7 @@ struct leapraid_dynamic_task_desc { * struct leapraid_fw_evt_work - Firmware event work structure * * @list: Linked list node for queuing the work - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @work: Work structure used by the kernel workqueue * @refcnt: Reference counter for managing the lifetime of this work * @evt_data: Pointer to firmware event data @@ -554,9 +555,9 @@ struct leapraid_fw_evt_struct { }; /** - * struct leapraid_rq - Represents a LeapRaid request queue + * struct leapraid_rq - Represents a LeapRAID request queue * - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @msix_idx: MSI-X vector index used by this queue * @rep_post_host_idx: Index of the last processed reply descriptor * @rep_desc: Pointer to the reply descriptor associated with this queue @@ -576,7 +577,7 @@ struct leapraid_rq { * struct leapraid_int_rq - Internal request queue for a CPU * * @affinity_hint: CPU affinity mask for the queue - * @rq: Underlying LeapRaid request queue structure + * @rq: Underlying LeapRAID request queue structure */ struct leapraid_int_rq { cpumask_var_t affinity_hint; @@ -584,11 +585,11 @@ struct leapraid_int_rq { }; /** - * struct leapraid_blk_mq_poll_rq - Polling request for LeapRaid blk-mq + * struct leapraid_blk_mq_poll_rq - Polling request for LeapRAID blk-mq * * @busy: Atomic flag indicating request is being processed * @pause: Atomic flag to temporarily suspend polling - * @rq: The underlying LeapRaid request structure + * @rq: The underlying LeapRAID request structure */ struct leapraid_blk_mq_poll_rq { atomic_t busy; @@ -598,7 +599,7 @@ struct leapraid_blk_mq_poll_rq { /** * struct leapraid_notification_desc - Notification - * descriptor for LeapRaid + * descriptor for LeapRAID * * @iopoll_qdex: Index of the I/O polling queue * @iopoll_qcnt: Count of I/O polling queues @@ -621,7 +622,7 @@ struct leapraid_notification_desc { }; /** - * struct leapraid_reset_desc - Reset descriptor for LeapRaid + * struct leapraid_reset_desc - Reset descriptor for LeapRAID * * @fault_reset_wq: Workqueue for fault reset operations * @fault_reset_work: Delayed work structure for fault reset @@ -651,7 +652,7 @@ struct leapraid_reset_desc { /** * struct leapraid_scan_dev_desc - Scan device descriptor - * for LeapRaid + * for LeapRAID * * @wait_scan_dev_done: Flag indicating if scan device operation is done * @driver_loading: Flag indicating if driver is loading @@ -670,7 +671,7 @@ struct leapraid_scan_dev_desc { }; /** - * struct leapraid_access_ctrl - Access control structure for LeapRaid + * struct leapraid_access_ctrl - Access control structure for LeapRAID * * @pci_access_lock: Mutex for PCI access control * @adapter_thermal_alert: Flag indicating if adapter thermal alert is active @@ -687,7 +688,7 @@ struct leapraid_access_ctrl { }; /** - * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRaid + * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRAID * * @fw_log_buffer: Buffer for firmware log data * @fw_log_buffer_dma: DMA address of the firmware log buffer @@ -711,7 +712,7 @@ struct leapraid_fw_log_desc { #define LEAPRAID_CARD_PORT_FLG_NEW 0x02 #define LEAPRAID_DISABLE_MP_PORT_ID 0xFF /** - * struct leapraid_card_port - Card port structure for LeapRaid + * struct leapraid_card_port - Card port structure for LeapRAID * * @list: List head for card port * @vphys_list: List head for virtual phy list @@ -732,7 +733,7 @@ struct leapraid_card_port { }; /** - * struct leapraid_card_phy - Card phy structure for LeapRaid + * struct leapraid_card_phy - Card phy structure for LeapRAID * * @port_siblings: List head for port siblings * @card_port: Pointer to the card port @@ -759,7 +760,7 @@ struct leapraid_card_phy { }; /** - * struct leapraid_topo_node - SAS topology node for LeapRaid + * struct leapraid_topo_node - SAS topology node for LeapRAID * * @list: List head for linking nodes * @sas_port_list: List of SAS ports @@ -792,7 +793,7 @@ struct leapraid_topo_node { }; /** - * struct leapraid_dev_topo - LeapRaid device topology management structure + * struct leapraid_dev_topo - LeapRAID device topology management structure * * @topo_node_lock: Spinlock for protecting topology node operations * @sas_dev_lock: Spinlock for SAS device list access @@ -832,7 +833,7 @@ struct leapraid_dev_topo { }; /** - * struct leapraid_boot_dev - Boot device structure for LeapRaid + * struct leapraid_boot_dev - Boot device structure for LeapRAID * * @dev: Device pointer * @chnl: Channel number @@ -871,7 +872,7 @@ struct leapraid_smart_poll_desc { }; /** - * struct leapraid_adapter - Main LeapRaid adapter structure + * struct leapraid_adapter - Main LeapRAID adapter structure * @list: List head for adapter management * @shost: SCSI host structure * @pdev: PCI device structure diff --git a/drivers/scsi/leapraid/leapraid_os.c b/drivers/scsi/leapraid/leapraid_os.c index be0f7cbb6684..f8354c68ab71 100644 --- a/drivers/scsi/leapraid/leapraid_os.c +++ b/drivers/scsi/leapraid/leapraid_os.c @@ -2124,7 +2124,7 @@ static void leapraid_shutdown(struct pci_dev *pdev) adapter->access_ctrl.host_removing = true; leapraid_wait_cmds_done(adapter); leapraid_clean_active_fw_evt(adapter); - + leapraid_fw_log_stop(adapter); spin_lock_irqsave(&adapter->fw_evt_s.fw_evt_lock, flags); wq = adapter->fw_evt_s.fw_evt_thread; adapter->fw_evt_s.fw_evt_thread = NULL; -- 2.25.1

2 2

[PATCH OLK-5.10] scsi: leapraid: add RAID disk hide/show events and fix misc issues
by haodongdong 02 Feb '26

02 Feb '26

LeapIO inclusion category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8463 ------------------------------------------ This change introduces RAID disk hide/show events to allow dynamic visibility control of RAID devices. It also updates the MSI-X vector count retrieval logic and unifies driver naming from LeapRaid to LeapRAID for consistency. In addition, fix an issue where the fw_log workqueue was not properly released during system shutdown, which could lead to resource leaks. Signed-off-by: haodongdong <doubled(a)leap-io.com> --- drivers/scsi/leapraid/leapraid.h | 2 + drivers/scsi/leapraid/leapraid_func.c | 104 ++++++++++++++++++++++---- drivers/scsi/leapraid/leapraid_func.h | 47 ++++++------ drivers/scsi/leapraid/leapraid_os.c | 2 +- 4 files changed, 116 insertions(+), 39 deletions(-) diff --git a/drivers/scsi/leapraid/leapraid.h b/drivers/scsi/leapraid/leapraid.h index 842810d41542..77bb93b79254 100644 --- a/drivers/scsi/leapraid/leapraid.h +++ b/drivers/scsi/leapraid/leapraid.h @@ -310,6 +310,8 @@ #define LEAPRAID_EVT_IR_RC_PD_UNHIDDEN_TO_DELETE 0x04 #define LEAPRAID_EVT_IR_RC_PD_CREATED_TO_HIDE 0x05 #define LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE 0x06 +#define LEAPRAID_EVT_IR_RC_VOLUME_HIDE 0x0A +#define LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE 0x0B /* sas topology change event */ #define LEAPRAID_EVT_SAS_TOPO_ES_NO_EXPANDER 0x00 diff --git a/drivers/scsi/leapraid/leapraid_func.c b/drivers/scsi/leapraid/leapraid_func.c index c83c30f56805..5dfe95a8dd84 100644 --- a/drivers/scsi/leapraid/leapraid_func.c +++ b/drivers/scsi/leapraid/leapraid_func.c @@ -4117,6 +4117,66 @@ static void leapraid_sas_pd_expose( } } +static void leapraid_sas_vol_visibility(struct leapraid_adapter *adapter, + struct leapraid_evt_data_ir_change *evt_data) +{ + struct leapraid_raid_volume *raid_volume = NULL; + struct scsi_device *sdev = NULL; + u16 hdl = 0; + unsigned long flags; + u8 rc = 0; + u8 reprobe_flg = 0; + + hdl = le16_to_cpu(evt_data->vol_dev_hdl); + rc = evt_data->reason_code; + spin_lock_irqsave(&adapter->dev_topo.raid_volume_lock, flags); + raid_volume = leapraid_raid_volume_find_by_hdl(adapter, hdl); + if (!raid_volume) { + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, + flags); + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x not found\n", + __func__, __LINE__, hdl); + return; + } + + reprobe_flg = 0; + sdev = raid_volume->sdev; + if (sdev) { + if (sdev->no_uld_attach) { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE) { + sdev->no_uld_attach = 0; + reprobe_flg = 1; + } + } else { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_HIDE) { + sdev->no_uld_attach = 1; + reprobe_flg = 1; + } + } + + if (reprobe_flg) { + if (sdev->no_uld_attach) + sdev_printk(KERN_INFO, sdev, "hide vol\n"); + else + sdev_printk(KERN_INFO, sdev, "unhide vol\n"); + + WARN_ON(scsi_device_reprobe(sdev)); + } else { + dev_warn(&adapter->pdev->dev, + "%s:rc(0x%x):request matches, skipping.\n", + __func__, rc); + } + + } else { + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x has no sdev\n", + __func__, __LINE__, hdl); + } + + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, flags); +} + static void leapraid_sas_volume_add(struct leapraid_adapter *adapter, struct leapraid_evt_data_ir_change *evt_data) { @@ -4235,6 +4295,10 @@ static void leapraid_sas_ir_chg_evt(struct leapraid_adapter *adapter, case LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE: leapraid_sas_pd_expose(adapter, evt_data); break; + case LEAPRAID_EVT_IR_RC_VOLUME_HIDE: + case LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE: + leapraid_sas_vol_visibility(adapter, evt_data); + break; default: break; } @@ -6382,6 +6446,8 @@ static int leapraid_get_adapter_features(struct leapraid_adapter *adapter) le16_to_cpu(leap_mpi_rep.hp_slot); adapter->adapter_attr.features.adapter_caps = le32_to_cpu(leap_mpi_rep.adapter_caps); + adapter->adapter_attr.features.max_msix_vectors = + leap_mpi_rep.max_msix_vectors; adapter->adapter_attr.features.max_volumes = leap_mpi_rep.max_volumes; if (!adapter->adapter_attr.features.max_volumes) @@ -6741,11 +6807,15 @@ static int leapraid_set_msix(struct leapraid_adapter *adapter) goto legacy_int; msix_cnt = leapraid_msix_cnt(adapter->pdev); - if (msix_cnt <= 0) { + if (msix_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { dev_info(&adapter->pdev->dev, "msix unsupported!\n"); goto legacy_int; } + msix_cnt = min_t(int, msix_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -6839,11 +6909,15 @@ static int leapraid_set_msi(struct leapraid_adapter *adapter) goto legacy_int1; msi_cnt = leapraid_msi_cnt(adapter->pdev); - if (msi_cnt <= 0) { - dev_info(&adapter->pdev->dev, "msix unsupported!\n"); + if (msi_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { + dev_info(&adapter->pdev->dev, "msi unsupported!\n"); goto legacy_int1; } + msi_cnt = min_t(int, msi_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -6988,6 +7062,18 @@ int leapraid_set_pcie_and_notification(struct leapraid_adapter *adapter) leapraid_mask_int(adapter); + rc = leapraid_make_adapter_ready(adapter, PART_RESET); + if (rc) { + dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); + goto out_fail; + } + + rc = leapraid_get_adapter_features(adapter); + if (rc) { + dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); + goto out_fail; + } + rc = leapraid_set_notification(adapter); if (rc) goto out_fail; @@ -8185,18 +8271,6 @@ int leapraid_ctrl_init(struct leapraid_adapter *adapter) PCI_EXP_DEVCTL_EXT_TAG); } - rc = leapraid_make_adapter_ready(adapter, PART_RESET); - if (rc) { - dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); - goto out_free_resources; - } - - rc = leapraid_get_adapter_features(adapter); - if (rc) { - dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); - goto out_free_resources; - } - rc = leapraid_fw_log_init(adapter); if (rc) { dev_err(&adapter->pdev->dev, "fw log init failure\n"); diff --git a/drivers/scsi/leapraid/leapraid_func.h b/drivers/scsi/leapraid/leapraid_func.h index 9f42763bda72..15293922aefa 100644 --- a/drivers/scsi/leapraid/leapraid_func.h +++ b/drivers/scsi/leapraid/leapraid_func.h @@ -45,15 +45,15 @@ #define LEAPRAID_SYS_LOG_BUF_RESERVE 0x1000 /* Driver version and name */ -#define LEAPRAID_DRIVER_NAME "LeapRaid" +#define LEAPRAID_DRIVER_NAME "LeapRAID" #define LEAPRAID_NAME_LENGTH 48 #define LEAPRAID_AUTHOR "LeapIO Inc." -#define LEAPRAID_DESCRIPTION "LeapRaid Driver" -#define LEAPRAID_DRIVER_VERSION "2.00.00.05" +#define LEAPRAID_DESCRIPTION "LeapRAID Driver" +#define LEAPRAID_DRIVER_VERSION "2.00.00.06" #define LEAPRAID_MAJOR_VERSION 2 #define LEAPRAID_MINOR_VERSION 00 #define LEAPRAID_BUILD_VERSION 00 -#define LEAPRAID_RELEASE_VERSION 05 +#define LEAPRAID_RELEASE_VERSION 06 /* Device ID */ #define LEAPRAID_VENDOR_ID 0xD405 @@ -242,6 +242,7 @@ struct leapraid_adapter_features { u16 hp_slot; u32 adapter_caps; u32 fw_version; + u8 max_msix_vectors; u8 max_volumes; u16 max_dev_handle; u16 min_dev_handle; @@ -348,7 +349,7 @@ struct leapraid_rep_desc_seg_maint { }; /** - * struct leapraid_mem_desc - Memory descriptor for LeapRaid adapter + * struct leapraid_mem_desc - Memory descriptor for LeapRAID adapter * * @task_desc: Pointer to task descriptor * @task_desc_dma: DMA address of task descriptor @@ -394,7 +395,7 @@ struct leapraid_mem_desc { #define LEAPRAID_CMD_RESET 0x0008 /** - * enum LEAPRAID_CB_INDEX - Callback index for LeapRaid driver + * enum LEAPRAID_CB_INDEX - Callback index for LeapRAID driver * * @LEAPRAID_SCAN_DEV_CB_IDX: Scan device callback index * @LEAPRAID_CONFIG_CB_IDX: Configuration callback index @@ -512,7 +513,7 @@ struct leapraid_dynamic_task_desc { * struct leapraid_fw_evt_work - Firmware event work structure * * @list: Linked list node for queuing the work - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @work: Work structure used by the kernel workqueue * @refcnt: Reference counter for managing the lifetime of this work * @evt_data: Pointer to firmware event data @@ -553,9 +554,9 @@ struct leapraid_fw_evt_struct { }; /** - * struct leapraid_rq - Represents a LeapRaid request queue + * struct leapraid_rq - Represents a LeapRAID request queue * - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @msix_idx: MSI-X vector index used by this queue * @rep_post_host_idx: Index of the last processed reply descriptor * @rep_desc: Pointer to the reply descriptor associated with this queue @@ -575,7 +576,7 @@ struct leapraid_rq { * struct leapraid_int_rq - Internal request queue for a CPU * * @affinity_hint: CPU affinity mask for the queue - * @rq: Underlying LeapRaid request queue structure + * @rq: Underlying LeapRAID request queue structure */ struct leapraid_int_rq { cpumask_var_t affinity_hint; @@ -583,11 +584,11 @@ struct leapraid_int_rq { }; /** - * struct leapraid_blk_mq_poll_rq - Polling request for LeapRaid blk-mq + * struct leapraid_blk_mq_poll_rq - Polling request for LeapRAID blk-mq * * @busy: Atomic flag indicating request is being processed * @pause: Atomic flag to temporarily suspend polling - * @rq: The underlying LeapRaid request structure + * @rq: The underlying LeapRAID request structure */ struct leapraid_blk_mq_poll_rq { atomic_t busy; @@ -597,7 +598,7 @@ struct leapraid_blk_mq_poll_rq { /** * struct leapraid_notification_desc - Notification - * descriptor for LeapRaid + * descriptor for LeapRAID * * @iopoll_qdex: Index of the I/O polling queue * @iopoll_qcnt: Count of I/O polling queues @@ -620,7 +621,7 @@ struct leapraid_notification_desc { }; /** - * struct leapraid_reset_desc - Reset descriptor for LeapRaid + * struct leapraid_reset_desc - Reset descriptor for LeapRAID * * @fault_reset_wq: Workqueue for fault reset operations * @fault_reset_work: Delayed work structure for fault reset @@ -650,7 +651,7 @@ struct leapraid_reset_desc { /** * struct leapraid_scan_dev_desc - Scan device descriptor - * for LeapRaid + * for LeapRAID * * @wait_scan_dev_done: Flag indicating if scan device operation is done * @driver_loading: Flag indicating if driver is loading @@ -669,7 +670,7 @@ struct leapraid_scan_dev_desc { }; /** - * struct leapraid_access_ctrl - Access control structure for LeapRaid + * struct leapraid_access_ctrl - Access control structure for LeapRAID * * @pci_access_lock: Mutex for PCI access control * @adapter_thermal_alert: Flag indicating if adapter thermal alert is active @@ -686,7 +687,7 @@ struct leapraid_access_ctrl { }; /** - * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRaid + * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRAID * * @fw_log_buffer: Buffer for firmware log data * @fw_log_buffer_dma: DMA address of the firmware log buffer @@ -710,7 +711,7 @@ struct leapraid_fw_log_desc { #define LEAPRAID_CARD_PORT_FLG_NEW 0x02 #define LEAPRAID_DISABLE_MP_PORT_ID 0xFF /** - * struct leapraid_card_port - Card port structure for LeapRaid + * struct leapraid_card_port - Card port structure for LeapRAID * * @list: List head for card port * @vphys_list: List head for virtual phy list @@ -731,7 +732,7 @@ struct leapraid_card_port { }; /** - * struct leapraid_card_phy - Card phy structure for LeapRaid + * struct leapraid_card_phy - Card phy structure for LeapRAID * * @port_siblings: List head for port siblings * @card_port: Pointer to the card port @@ -758,7 +759,7 @@ struct leapraid_card_phy { }; /** - * struct leapraid_topo_node - SAS topology node for LeapRaid + * struct leapraid_topo_node - SAS topology node for LeapRAID * * @list: List head for linking nodes * @sas_port_list: List of SAS ports @@ -791,7 +792,7 @@ struct leapraid_topo_node { }; /** - * struct leapraid_dev_topo - LeapRaid device topology management structure + * struct leapraid_dev_topo - LeapRAID device topology management structure * * @topo_node_lock: Spinlock for protecting topology node operations * @sas_dev_lock: Spinlock for SAS device list access @@ -831,7 +832,7 @@ struct leapraid_dev_topo { }; /** - * struct leapraid_boot_dev - Boot device structure for LeapRaid + * struct leapraid_boot_dev - Boot device structure for LeapRAID * * @dev: Device pointer * @chnl: Channel number @@ -870,7 +871,7 @@ struct leapraid_smart_poll_desc { }; /** - * struct leapraid_adapter - Main LeapRaid adapter structure + * struct leapraid_adapter - Main LeapRAID adapter structure * @list: List head for adapter management * @shost: SCSI host structure * @pdev: PCI device structure diff --git a/drivers/scsi/leapraid/leapraid_os.c b/drivers/scsi/leapraid/leapraid_os.c index 44ec2615648f..6635e74fd8ff 100644 --- a/drivers/scsi/leapraid/leapraid_os.c +++ b/drivers/scsi/leapraid/leapraid_os.c @@ -2029,7 +2029,7 @@ static void leapraid_shutdown(struct pci_dev *pdev) adapter->access_ctrl.host_removing = true; leapraid_wait_cmds_done(adapter); leapraid_clean_active_fw_evt(adapter); - + leapraid_fw_log_stop(adapter); spin_lock_irqsave(&adapter->fw_evt_s.fw_evt_lock, flags); wq = adapter->fw_evt_s.fw_evt_thread; adapter->fw_evt_s.fw_evt_thread = NULL; -- 2.25.1

2 2

[PATCH OLK-6.6] scsi: leapraid: add RAID disk hide/show events and fix misc issues
by haodongdong 02 Feb '26

02 Feb '26

LeapIO inclusion category: feature bugzilla: https://atomgit.com/openeuler/kernel/issues/8462 This change introduces RAID disk hide/show events to allow dynamic visibility control of RAID devices. It also updates the MSI-X vector count retrieval logic and unifies driver naming from LeapRaid to LeapRAID for consistency. In addition, fix an issue where the fw_log workqueue was not properly released during system shutdown, which could lead to resource leaks. Signed-off-by: haodongdong <doubled(a)leap-io.com> --- drivers/scsi/leapraid/leapraid.h | 2 + drivers/scsi/leapraid/leapraid_func.c | 104 ++++++++++++++++++++++---- drivers/scsi/leapraid/leapraid_func.h | 47 ++++++------ drivers/scsi/leapraid/leapraid_os.c | 2 +- 4 files changed, 116 insertions(+), 39 deletions(-) diff --git a/drivers/scsi/leapraid/leapraid.h b/drivers/scsi/leapraid/leapraid.h index 842810d41542..77bb93b79254 100644 --- a/drivers/scsi/leapraid/leapraid.h +++ b/drivers/scsi/leapraid/leapraid.h @@ -310,6 +310,8 @@ #define LEAPRAID_EVT_IR_RC_PD_UNHIDDEN_TO_DELETE 0x04 #define LEAPRAID_EVT_IR_RC_PD_CREATED_TO_HIDE 0x05 #define LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE 0x06 +#define LEAPRAID_EVT_IR_RC_VOLUME_HIDE 0x0A +#define LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE 0x0B /* sas topology change event */ #define LEAPRAID_EVT_SAS_TOPO_ES_NO_EXPANDER 0x00 diff --git a/drivers/scsi/leapraid/leapraid_func.c b/drivers/scsi/leapraid/leapraid_func.c index 2fc142fff982..ad8aee40e2c1 100644 --- a/drivers/scsi/leapraid/leapraid_func.c +++ b/drivers/scsi/leapraid/leapraid_func.c @@ -4132,6 +4132,66 @@ static void leapraid_sas_pd_expose( } } +static void leapraid_sas_vol_visibility(struct leapraid_adapter *adapter, + struct leapraid_evt_data_ir_change *evt_data) +{ + struct leapraid_raid_volume *raid_volume = NULL; + struct scsi_device *sdev = NULL; + u16 hdl = 0; + unsigned long flags; + u8 rc = 0; + u8 reprobe_flg = 0; + + hdl = le16_to_cpu(evt_data->vol_dev_hdl); + rc = evt_data->reason_code; + spin_lock_irqsave(&adapter->dev_topo.raid_volume_lock, flags); + raid_volume = leapraid_raid_volume_find_by_hdl(adapter, hdl); + if (!raid_volume) { + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, + flags); + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x not found\n", + __func__, __LINE__, hdl); + return; + } + + reprobe_flg = 0; + sdev = raid_volume->sdev; + if (sdev) { + if (sdev->no_uld_attach) { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE) { + sdev->no_uld_attach = 0; + reprobe_flg = 1; + } + } else { + if (rc == LEAPRAID_EVT_IR_RC_VOLUME_HIDE) { + sdev->no_uld_attach = 1; + reprobe_flg = 1; + } + } + + if (reprobe_flg) { + if (sdev->no_uld_attach) + sdev_printk(KERN_INFO, sdev, "hide vol\n"); + else + sdev_printk(KERN_INFO, sdev, "unhide vol\n"); + + WARN_ON(scsi_device_reprobe(sdev)); + } else { + dev_warn(&adapter->pdev->dev, + "%s:rc(0x%x):request matches, skipping.\n", + __func__, rc); + } + + } else { + dev_warn(&adapter->pdev->dev, + "%s:%d: volume handle 0x%x has no sdev\n", + __func__, __LINE__, hdl); + } + + spin_unlock_irqrestore(&adapter->dev_topo.raid_volume_lock, flags); +} + static void leapraid_sas_volume_add(struct leapraid_adapter *adapter, struct leapraid_evt_data_ir_change *evt_data) { @@ -4250,6 +4310,10 @@ static void leapraid_sas_ir_chg_evt(struct leapraid_adapter *adapter, case LEAPRAID_EVT_IR_RC_PD_DELETED_TO_EXPOSE: leapraid_sas_pd_expose(adapter, evt_data); break; + case LEAPRAID_EVT_IR_RC_VOLUME_HIDE: + case LEAPRAID_EVT_IR_RC_VOLUME_UNHIDE: + leapraid_sas_vol_visibility(adapter, evt_data); + break; default: break; } @@ -6397,6 +6461,8 @@ static int leapraid_get_adapter_features(struct leapraid_adapter *adapter) le16_to_cpu(leap_mpi_rep.hp_slot); adapter->adapter_attr.features.adapter_caps = le32_to_cpu(leap_mpi_rep.adapter_caps); + adapter->adapter_attr.features.max_msix_vectors = + leap_mpi_rep.max_msix_vectors; adapter->adapter_attr.features.max_volumes = leap_mpi_rep.max_volumes; if (!adapter->adapter_attr.features.max_volumes) @@ -6754,11 +6820,15 @@ static int leapraid_set_msix(struct leapraid_adapter *adapter) goto legacy_int; msix_cnt = leapraid_msix_cnt(adapter->pdev); - if (msix_cnt <= 0) { + if (msix_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { dev_info(&adapter->pdev->dev, "msix unsupported!\n"); goto legacy_int; } + msix_cnt = min_t(int, msix_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -6859,11 +6929,15 @@ static int leapraid_set_msi(struct leapraid_adapter *adapter) goto legacy_int1; msi_cnt = leapraid_msi_cnt(adapter->pdev); - if (msi_cnt <= 0) { - dev_info(&adapter->pdev->dev, "msix unsupported!\n"); + if (msi_cnt <= 0 || + adapter->adapter_attr.features.max_msix_vectors == 0) { + dev_info(&adapter->pdev->dev, "msi unsupported!\n"); goto legacy_int1; } + msi_cnt = min_t(int, msi_cnt, + adapter->adapter_attr.features.max_msix_vectors); + if (reset_devices) adapter->adapter_attr.rq_cnt = 1; else @@ -7015,6 +7089,18 @@ int leapraid_set_pcie_and_notification(struct leapraid_adapter *adapter) leapraid_mask_int(adapter); + rc = leapraid_make_adapter_ready(adapter, PART_RESET); + if (rc) { + dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); + goto out_fail; + } + + rc = leapraid_get_adapter_features(adapter); + if (rc) { + dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); + goto out_fail; + } + rc = leapraid_set_notification(adapter); if (rc) goto out_fail; @@ -8185,18 +8271,6 @@ int leapraid_ctrl_init(struct leapraid_adapter *adapter) PCI_EXP_DEVCTL_EXT_TAG); } - rc = leapraid_make_adapter_ready(adapter, PART_RESET); - if (rc) { - dev_err(&adapter->pdev->dev, "make adapter ready failure\n"); - goto out_free_resources; - } - - rc = leapraid_get_adapter_features(adapter); - if (rc) { - dev_err(&adapter->pdev->dev, "get adapter feature failure\n"); - goto out_free_resources; - } - rc = leapraid_fw_log_init(adapter); if (rc) { dev_err(&adapter->pdev->dev, "fw log init failure\n"); diff --git a/drivers/scsi/leapraid/leapraid_func.h b/drivers/scsi/leapraid/leapraid_func.h index 2c51ef359b7e..f7072d078315 100644 --- a/drivers/scsi/leapraid/leapraid_func.h +++ b/drivers/scsi/leapraid/leapraid_func.h @@ -46,15 +46,15 @@ #define LEAPRAID_SYS_LOG_BUF_RESERVE 0x1000 /* Driver version and name */ -#define LEAPRAID_DRIVER_NAME "LeapRaid" +#define LEAPRAID_DRIVER_NAME "LeapRAID" #define LEAPRAID_NAME_LENGTH 48 #define LEAPRAID_AUTHOR "LeapIO Inc." -#define LEAPRAID_DESCRIPTION "LeapRaid Driver" -#define LEAPRAID_DRIVER_VERSION "2.00.00.05" +#define LEAPRAID_DESCRIPTION "LeapRAID Driver" +#define LEAPRAID_DRIVER_VERSION "2.00.00.06" #define LEAPRAID_MAJOR_VERSION 2 #define LEAPRAID_MINOR_VERSION 00 #define LEAPRAID_BUILD_VERSION 00 -#define LEAPRAID_RELEASE_VERSION 05 +#define LEAPRAID_RELEASE_VERSION 06 /* Device ID */ #define LEAPRAID_VENDOR_ID 0xD405 @@ -243,6 +243,7 @@ struct leapraid_adapter_features { u16 hp_slot; u32 adapter_caps; u32 fw_version; + u8 max_msix_vectors; u8 max_volumes; u16 max_dev_handle; u16 min_dev_handle; @@ -349,7 +350,7 @@ struct leapraid_rep_desc_seg_maint { }; /** - * struct leapraid_mem_desc - Memory descriptor for LeapRaid adapter + * struct leapraid_mem_desc - Memory descriptor for LeapRAID adapter * * @task_desc: Pointer to task descriptor * @task_desc_dma: DMA address of task descriptor @@ -395,7 +396,7 @@ struct leapraid_mem_desc { #define LEAPRAID_CMD_RESET 0x0008 /** - * enum LEAPRAID_CB_INDEX - Callback index for LeapRaid driver + * enum LEAPRAID_CB_INDEX - Callback index for LeapRAID driver * * @LEAPRAID_SCAN_DEV_CB_IDX: Scan device callback index * @LEAPRAID_CONFIG_CB_IDX: Configuration callback index @@ -513,7 +514,7 @@ struct leapraid_dynamic_task_desc { * struct leapraid_fw_evt_work - Firmware event work structure * * @list: Linked list node for queuing the work - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @work: Work structure used by the kernel workqueue * @refcnt: Reference counter for managing the lifetime of this work * @evt_data: Pointer to firmware event data @@ -554,9 +555,9 @@ struct leapraid_fw_evt_struct { }; /** - * struct leapraid_rq - Represents a LeapRaid request queue + * struct leapraid_rq - Represents a LeapRAID request queue * - * @adapter: Pointer to the associated LeapRaid adapter + * @adapter: Pointer to the associated LeapRAID adapter * @msix_idx: MSI-X vector index used by this queue * @rep_post_host_idx: Index of the last processed reply descriptor * @rep_desc: Pointer to the reply descriptor associated with this queue @@ -576,7 +577,7 @@ struct leapraid_rq { * struct leapraid_int_rq - Internal request queue for a CPU * * @affinity_hint: CPU affinity mask for the queue - * @rq: Underlying LeapRaid request queue structure + * @rq: Underlying LeapRAID request queue structure */ struct leapraid_int_rq { cpumask_var_t affinity_hint; @@ -584,11 +585,11 @@ struct leapraid_int_rq { }; /** - * struct leapraid_blk_mq_poll_rq - Polling request for LeapRaid blk-mq + * struct leapraid_blk_mq_poll_rq - Polling request for LeapRAID blk-mq * * @busy: Atomic flag indicating request is being processed * @pause: Atomic flag to temporarily suspend polling - * @rq: The underlying LeapRaid request structure + * @rq: The underlying LeapRAID request structure */ struct leapraid_blk_mq_poll_rq { atomic_t busy; @@ -598,7 +599,7 @@ struct leapraid_blk_mq_poll_rq { /** * struct leapraid_notification_desc - Notification - * descriptor for LeapRaid + * descriptor for LeapRAID * * @iopoll_qdex: Index of the I/O polling queue * @iopoll_qcnt: Count of I/O polling queues @@ -621,7 +622,7 @@ struct leapraid_notification_desc { }; /** - * struct leapraid_reset_desc - Reset descriptor for LeapRaid + * struct leapraid_reset_desc - Reset descriptor for LeapRAID * * @fault_reset_wq: Workqueue for fault reset operations * @fault_reset_work: Delayed work structure for fault reset @@ -651,7 +652,7 @@ struct leapraid_reset_desc { /** * struct leapraid_scan_dev_desc - Scan device descriptor - * for LeapRaid + * for LeapRAID * * @wait_scan_dev_done: Flag indicating if scan device operation is done * @driver_loading: Flag indicating if driver is loading @@ -670,7 +671,7 @@ struct leapraid_scan_dev_desc { }; /** - * struct leapraid_access_ctrl - Access control structure for LeapRaid + * struct leapraid_access_ctrl - Access control structure for LeapRAID * * @pci_access_lock: Mutex for PCI access control * @adapter_thermal_alert: Flag indicating if adapter thermal alert is active @@ -687,7 +688,7 @@ struct leapraid_access_ctrl { }; /** - * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRaid + * struct leapraid_fw_log_desc - Firmware log descriptor for LeapRAID * * @fw_log_buffer: Buffer for firmware log data * @fw_log_buffer_dma: DMA address of the firmware log buffer @@ -711,7 +712,7 @@ struct leapraid_fw_log_desc { #define LEAPRAID_CARD_PORT_FLG_NEW 0x02 #define LEAPRAID_DISABLE_MP_PORT_ID 0xFF /** - * struct leapraid_card_port - Card port structure for LeapRaid + * struct leapraid_card_port - Card port structure for LeapRAID * * @list: List head for card port * @vphys_list: List head for virtual phy list @@ -732,7 +733,7 @@ struct leapraid_card_port { }; /** - * struct leapraid_card_phy - Card phy structure for LeapRaid + * struct leapraid_card_phy - Card phy structure for LeapRAID * * @port_siblings: List head for port siblings * @card_port: Pointer to the card port @@ -759,7 +760,7 @@ struct leapraid_card_phy { }; /** - * struct leapraid_topo_node - SAS topology node for LeapRaid + * struct leapraid_topo_node - SAS topology node for LeapRAID * * @list: List head for linking nodes * @sas_port_list: List of SAS ports @@ -792,7 +793,7 @@ struct leapraid_topo_node { }; /** - * struct leapraid_dev_topo - LeapRaid device topology management structure + * struct leapraid_dev_topo - LeapRAID device topology management structure * * @topo_node_lock: Spinlock for protecting topology node operations * @sas_dev_lock: Spinlock for SAS device list access @@ -832,7 +833,7 @@ struct leapraid_dev_topo { }; /** - * struct leapraid_boot_dev - Boot device structure for LeapRaid + * struct leapraid_boot_dev - Boot device structure for LeapRAID * * @dev: Device pointer * @chnl: Channel number @@ -871,7 +872,7 @@ struct leapraid_smart_poll_desc { }; /** - * struct leapraid_adapter - Main LeapRaid adapter structure + * struct leapraid_adapter - Main LeapRAID adapter structure * @list: List head for adapter management * @shost: SCSI host structure * @pdev: PCI device structure diff --git a/drivers/scsi/leapraid/leapraid_os.c b/drivers/scsi/leapraid/leapraid_os.c index be0f7cbb6684..f8354c68ab71 100644 --- a/drivers/scsi/leapraid/leapraid_os.c +++ b/drivers/scsi/leapraid/leapraid_os.c @@ -2124,7 +2124,7 @@ static void leapraid_shutdown(struct pci_dev *pdev) adapter->access_ctrl.host_removing = true; leapraid_wait_cmds_done(adapter); leapraid_clean_active_fw_evt(adapter); - + leapraid_fw_log_stop(adapter); spin_lock_irqsave(&adapter->fw_evt_s.fw_evt_lock, flags); wq = adapter->fw_evt_s.fw_evt_thread; adapter->fw_evt_s.fw_evt_thread = NULL; -- 2.25.1

2 1

[PATCH OLK-6.6] interference: Fix uninitialized ifs_clock compiling issue
by Pu Lehui 02 Feb '26

02 Feb '26

hulk inclusion category: bugfix bugzilla: https://atomgit.com/openeuler/kernel/issues/7429 -------------------------------- When compiling with clang, it will occur the warning: 623 | if (__mutex_trylock(lock)) { | ^~~~~~~~~~~~~~~~~~~~~ kernel/locking/mutex.c:725:24: note: uninitialized use occurs here 725 | cgroup_ifs_leave_lock(ifs_clock, IFS_MUTEX); | ^~~~~~~~~ kernel/locking/mutex.c:623:2: note: remove the 'if' if its condition is always false 623 | if (__mutex_trylock(lock)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ 624 | if (ww_ctx) | ~~~~~~~~~~~ 625 | __ww_mutex_check_waiters(lock, ww_ctx); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 626 | 627 | goto skip_wait; | ~~~~~~~~~~~~~~~ 628 | } | ~ kernel/locking/mutex.c:576:15: note: initialize the variable 'ifs_clock' to silence this warning 576 | u64 ifs_clock; | ^ | = 0 2 warnings generated. Let's fix it by zero initialize ifs_clock. Fixes: a1ad9b2ed459 ("interference: Add mutex interference track support") Signed-off-by: Pu Lehui <pulehui(a)huawei.com> --- include/linux/cgroup.h | 3 +++ kernel/locking/mutex.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h index 05a9cef2edac..d4f69e89b3fb 100644 --- a/include/linux/cgroup.h +++ b/include/linux/cgroup.h @@ -1000,6 +1000,9 @@ static inline void cgroup_ifs_leave_lock(u64 clock, enum ifs_types t) if (!cgroup_ifs_enabled()) return; + if (unlikely(!clock)) + return; + ifs = current_ifs(); if (ifs) { ifsc = this_cpu_ptr(ifs->pcpu); diff --git a/kernel/locking/mutex.c b/kernel/locking/mutex.c index 1003afe8dd74..038c6fb9d71d 100644 --- a/kernel/locking/mutex.c +++ b/kernel/locking/mutex.c @@ -573,7 +573,7 @@ __mutex_lock_common(struct mutex *lock, unsigned int state, unsigned int subclas { struct mutex_waiter waiter; struct ww_mutex *ww; - u64 ifs_clock; + u64 ifs_clock = 0; int ret; if (!use_ww_ctx) -- 2.34.1

2 1

[PATCH openEuler-1.0-LTS] usb: typec: altmodes/displayport: fix pin_assignment_show
by Yin Tirui 02 Feb '26

02 Feb '26

From: Badhri Jagan Sridharan <badhri(a)google.com> stable inclusion from stable-v4.19.284 commit 0e61a7432fcd4bca06f05b7f1c7d7cb461880fe2 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/13216 CVE: CVE-2023-54186 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream. This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable(a)vger.kernel.org Signed-off-by: Badhri Jagan Sridharan <badhri(a)google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus(a)linux.intel.com> Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yin Tirui <yintirui(a)huawei.com> --- drivers/usb/typec/altmodes/displayport.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index 90bb0baed624..3be3a1942b5f 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -495,6 +495,10 @@ static ssize_t pin_assignment_show(struct device *dev, mutex_unlock(&dp->lock); + /* get_current_pin_assignments can return 0 when no matching pin assignments are found */ + if (len == 0) + len++; + buf[len - 1] = '\n'; return len; } -- 2.43.0

2 1