- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6] firmware: arm_scpi: Check the DVFS OPP count returned by the firmware
by Yi Yang 06 Jan '25

06 Jan '25

From: Luo Qiu <luoqiu(a)kylinsec.com.cn> stable inclusion from stable-v6.6.64 commit 025067eeb945aa17c7dd483a63960125b7efb577 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBDHGL CVE: CVE-2024-53157 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 109aa654f85c5141e813b2cd1bd36d90be678407 ] Fix a kernel crash with the below call trace when the SCPI firmware returns OPP count of zero. dvfs_info.opp_count may be zero on some platforms during the reboot test, and the kernel will crash after dereferencing the pointer to kcalloc(info->count, sizeof(*opp), GFP_KERNEL). | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 | Mem abort info: | ESR = 0x96000004 | Exception class = DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000faefa08c | [0000000000000028] pgd=0000000000000000 | Internal error: Oops: 96000004 [#1] SMP | scpi-hwmon: probe of PHYT000D:00 failed with error -110 | Process systemd-udevd (pid: 1701, stack limit = 0x00000000aaede86c) | CPU: 2 PID: 1701 Comm: systemd-udevd Not tainted 4.19.90+ #1 | Hardware name: PHYTIUM LTD Phytium FT2000/4/Phytium FT2000/4, BIOS | pstate: 60000005 (nZCv daif -PAN -UAO) | pc : scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | lr : clk_register+0x438/0x720 | Call trace: | scpi_dvfs_recalc_rate+0x40/0x58 [clk_scpi] | devm_clk_hw_register+0x50/0xa0 | scpi_clk_ops_init.isra.2+0xa0/0x138 [clk_scpi] | scpi_clocks_probe+0x528/0x70c [clk_scpi] | platform_drv_probe+0x58/0xa8 | really_probe+0x260/0x3d0 | driver_probe_device+0x12c/0x148 | device_driver_attach+0x74/0x98 | __driver_attach+0xb4/0xe8 | bus_for_each_dev+0x88/0xe0 | driver_attach+0x30/0x40 | bus_add_driver+0x178/0x2b0 | driver_register+0x64/0x118 | __platform_driver_register+0x54/0x60 | scpi_clocks_driver_init+0x24/0x1000 [clk_scpi] | do_one_initcall+0x54/0x220 | do_init_module+0x54/0x1c8 | load_module+0x14a4/0x1668 | __se_sys_finit_module+0xf8/0x110 | __arm64_sys_finit_module+0x24/0x30 | el0_svc_common+0x78/0x170 | el0_svc_handler+0x38/0x78 | el0_svc+0x8/0x340 | Code: 937d7c00 a94153f3 a8c27bfd f9400421 (b8606820) | ---[ end trace 06feb22469d89fa8 ]--- | Kernel panic - not syncing: Fatal exception | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x10,a0002008 | Memory Limit: none Fixes: 8cb7cf56c9fe ("firmware: add support for ARM System Control and Power Interface(SCPI) protocol") Signed-off-by: Luo Qiu <luoqiu(a)kylinsec.com.cn> Message-Id: <55A2F7A784391686+20241101032115.275977-1-luoqiu(a)kylinsec.com.cn> Signed-off-by: Sudeep Holla <sudeep.holla(a)arm.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/firmware/arm_scpi.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c index 435d0e2658a4..3de25e9d18ef 100644 --- a/drivers/firmware/arm_scpi.c +++ b/drivers/firmware/arm_scpi.c @@ -627,6 +627,9 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain) if (ret) return ERR_PTR(ret); + if (!buf.opp_count) + return ERR_PTR(-ENOENT); + info = kmalloc(sizeof(*info), GFP_KERNEL); if (!info) return ERR_PTR(-ENOMEM); -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS] ALSA: us122l: Use snd_card_free_when_closed() at disconnection
by Li Nan 06 Jan '25

06 Jan '25

From: Takashi Iwai <tiwai(a)suse.de> stable inclusion from stable-v4.19.325 commit 020cbc4d7414f0962004213e2b7bc5cc607e9ec7 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEAG2 CVE: CVE-2024-56532 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit b7df09bb348016943f56b09dcaafe221e3f73947 ] The USB disconnect callback is supposed to be short and not too-long waiting. OTOH, the current code uses snd_card_free() at disconnection, but this waits for the close of all used fds, hence it can take long. It eventually blocks the upper layer USB ioctls, which may trigger a soft lockup. An easy workaround is to replace snd_card_free() with snd_card_free_when_closed(). This variant returns immediately while the release of resources is done asynchronously by the card device release at the last close. The loop of us122l->mmap_count check is dropped as well. The check is useless for the asynchronous operation with *_when_closed(). Fixes: 030a07e44129 ("ALSA: Add USB US122L driver") Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Link: https://patch.msgid.link/20241113111042.15058-3-tiwai@suse.de Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Li Nan <linan122(a)huawei.com> --- sound/usb/usx2y/us122l.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/sound/usb/usx2y/us122l.c b/sound/usb/usx2y/us122l.c index 8082f7b077f1..eac2e4d0e7d9 100644 --- a/sound/usb/usx2y/us122l.c +++ b/sound/usb/usx2y/us122l.c @@ -649,10 +649,7 @@ static void snd_us122l_disconnect(struct usb_interface *intf) usb_put_intf(usb_ifnum_to_if(us122l->dev, 1)); usb_put_dev(us122l->dev); - while (atomic_read(&us122l->mmap_count)) - msleep(500); - - snd_card_free(card); + snd_card_free_when_closed(card); } static int snd_us122l_suspend(struct usb_interface *intf, pm_message_t message) -- 2.39.2

2 1

[PATCH OLK-5.10] iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer
by Yi Yang 06 Jan '25

06 Jan '25

From: Nuno Sa <nuno.sa(a)analog.com> mainline inclusion from mainline-v6.13-rc1 commit 3a4187ec454e19903fd15f6e1825a4b84e59a4cd category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEAMO CVE: CVE-2024-56557 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode(). Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Cc: stable(a)vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa(a)analog.com> Signed-off-by: Zicheng Qu <quzicheng(a)huawei.com> Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Conflicts: drivers/iio/adc/ad7923.c [conflicts due to not mergered 908af45d70573 ("iio: adc: ad7923: Fix alignment for DMA safety")] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/iio/adc/ad7923.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index 96eeda433ad6..b44a853a8390 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -47,7 +47,7 @@ struct ad7923_state { struct spi_device *spi; - struct spi_transfer ring_xfer[5]; + struct spi_transfer ring_xfer[9]; struct spi_transfer scan_single_xfer[2]; struct spi_message ring_msg; struct spi_message scan_single_msg; @@ -63,7 +63,7 @@ struct ad7923_state { * Length = 8 channels + 4 extra for 8 byte timestamp */ __be16 rx_buf[12] ____cacheline_aligned; - __be16 tx_buf[4]; + __be16 tx_buf[8]; }; struct ad7923_chip_info { -- 2.25.1

2 1

[PATCH openEuler-1.0-LTS 1/1] 9p/xen: fix release of IRQ
by Ze Zuo 06 Jan '25

06 Jan '25

From: Alex Zenla <alex(a)edera.dev> stable inclusion from stable-v4.19.325 commit 692eb06703afc3e24d889d77e94a0e20229f6a4a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEDPA CVE: CVE-2024-56704 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit e43c608f40c065b30964f0a806348062991b802d ] Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. Fixes: 71ebd71921e45 ("xen/9pfs: connect to the backend") Signed-off-by: Alex Zenla <alex(a)edera.dev> Signed-off-by: Alexander Merritt <alexander(a)edera.dev> Signed-off-by: Ariadne Conill <ariadne(a)ariadne.space> Reviewed-by: Juergen Gross <jgross(a)suse.com> Message-ID: <20241121225100.5736-1-alexander(a)edera.dev> [Dominique: remove confusing variable reset to 0] Signed-off-by: Dominique Martinet <asmadeus(a)codewreck.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> (cherry picked from commit 692eb06703afc3e24d889d77e94a0e20229f6a4a) Signed-off-by: Ze Zuo <zuoze1(a)huawei.com> --- net/9p/trans_xen.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c index 8e158f09cba8..4096cfc7efc6 100644 --- a/net/9p/trans_xen.c +++ b/net/9p/trans_xen.c @@ -297,7 +297,7 @@ static void xen_9pfs_front_free(struct xen_9pfs_front_priv *priv) if (!priv->rings[i].intf) break; if (priv->rings[i].irq > 0) - unbind_from_irqhandler(priv->rings[i].irq, priv->dev); + unbind_from_irqhandler(priv->rings[i].irq, ring); if (priv->rings[i].data.in) { for (j = 0; j < (1 << XEN_9PFS_RING_ORDER); j++) { grant_ref_t ref; -- 2.25.1

2 1

[PATCH OLK-6.6] iio: adc: ad7923: Fix buffer overflow for tx_buf and ring_xfer
by Yi Yang 06 Jan '25

06 Jan '25

From: Nuno Sa <nuno.sa(a)analog.com> stable inclusion from stable-v6.6.64 commit e5cac32721997cb8bcb208a29f4598b3faf46338 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEAMO CVE: CVE-2024-56557 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 3a4187ec454e19903fd15f6e1825a4b84e59a4cd upstream. The AD7923 was updated to support devices with 8 channels, but the size of tx_buf and ring_xfer was not increased accordingly, leading to a potential buffer overflow in ad7923_update_scan_mode(). Fixes: 851644a60d20 ("iio: adc: ad7923: Add support for the ad7908/ad7918/ad7928") Cc: stable(a)vger.kernel.org Signed-off-by: Nuno Sa <nuno.sa(a)analog.com> Signed-off-by: Zicheng Qu <quzicheng(a)huawei.com> Link: https://patch.msgid.link/20241029134637.2261336-1-quzicheng@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/iio/adc/ad7923.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/iio/adc/ad7923.c b/drivers/iio/adc/ad7923.c index 9d6bf6d0927a..709ce2a50097 100644 --- a/drivers/iio/adc/ad7923.c +++ b/drivers/iio/adc/ad7923.c @@ -48,7 +48,7 @@ struct ad7923_state { struct spi_device *spi; - struct spi_transfer ring_xfer[5]; + struct spi_transfer ring_xfer[9]; struct spi_transfer scan_single_xfer[2]; struct spi_message ring_msg; struct spi_message scan_single_msg; @@ -64,7 +64,7 @@ struct ad7923_state { * Length = 8 channels + 4 extra for 8 byte timestamp */ __be16 rx_buf[12] __aligned(IIO_DMA_MINALIGN); - __be16 tx_buf[4]; + __be16 tx_buf[8]; }; struct ad7923_chip_info { -- 2.25.1

2 1

[PATCH OLK-6.6] vfio/mlx5: Fix an unwind issue in mlx5vf_add_migration_pages()
by Yi Yang 06 Jan '25

06 Jan '25

From: Yishai Hadas <yishaih(a)nvidia.com> mainline inclusion from mainline-v6.13-rc1 commit 22e87bf3f77c18f5982c19ffe2732ef0c7a25f16 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEGF7 CVE: CVE-2024-56742 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Fix an unwind issue in mlx5vf_add_migration_pages(). If a set of pages is allocated but fails to be added to the SG table, they need to be freed to prevent a memory leak. Any pages successfully added to the SG table will be freed as part of mlx5vf_free_data_buffer(). Fixes: 6fadb021266d ("vfio/mlx5: Implement vfio_pci driver for mlx5 devices") Signed-off-by: Yishai Hadas <yishaih(a)nvidia.com> Reviewed-by: Jason Gunthorpe <jgg(a)nvidia.com> Link: https://lore.kernel.org/r/20241114095318.16556-2-yishaih@nvidia.com Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Conflicts: drivers/vfio/pci/mlx5/main.c drivers/vfio/pci/mlx5/cmd.c [conflicts due to not mergered 821b8f6bf8489 ("vfio/mlx5: Enforce PRE_COPY support")] Signed-off-by: Yi Yang <yiyang13(a)huawei.com> --- drivers/vfio/pci/mlx5/main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/vfio/pci/mlx5/main.c b/drivers/vfio/pci/mlx5/main.c index 5cf2b491d15a..54bb74433ec1 100644 --- a/drivers/vfio/pci/mlx5/main.c +++ b/drivers/vfio/pci/mlx5/main.c @@ -71,6 +71,7 @@ int mlx5vf_add_migration_pages(struct mlx5_vhca_data_buffer *buf, unsigned long filled; unsigned int to_fill; int ret; + int i; to_fill = min_t(unsigned int, npages, PAGE_SIZE / sizeof(*page_list)); page_list = kvzalloc(to_fill * sizeof(*page_list), GFP_KERNEL_ACCOUNT); @@ -91,7 +92,7 @@ int mlx5vf_add_migration_pages(struct mlx5_vhca_data_buffer *buf, GFP_KERNEL_ACCOUNT); if (ret) - goto err; + goto err_append; buf->allocated_length += filled * PAGE_SIZE; /* clean input for another bulk allocation */ memset(page_list, 0, filled * sizeof(*page_list)); @@ -102,6 +103,9 @@ int mlx5vf_add_migration_pages(struct mlx5_vhca_data_buffer *buf, kvfree(page_list); return 0; +err_append: + for (i = filled - 1; i >= 0; i--) + __free_page(page_list[i]); err: kvfree(page_list); return ret; -- 2.25.1

2 1

[PATCH OLK-6.6] wifi: ath10k: avoid NULL pointer error during sdio remove
by Liu Mingrui 06 Jan '25

06 Jan '25

From: Kang Yang <quic_kangyang(a)quicinc.com> mainline inclusion from mainline-v6.13-rc1 commit 95c38953cb1ecf40399a676a1f85dfe2b5780a9a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEAPA CVE: CVE-2024-56599 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- When running 'rmmod ath10k', ath10k_sdio_remove() will free sdio workqueue by destroy_workqueue(). But if CONFIG_INIT_ON_FREE_DEFAULT_ON is set to yes, kernel panic will happen: Call trace: destroy_workqueue+0x1c/0x258 ath10k_sdio_remove+0x84/0x94 sdio_bus_remove+0x50/0x16c device_release_driver_internal+0x188/0x25c device_driver_detach+0x20/0x2c This is because during 'rmmod ath10k', ath10k_sdio_remove() will call ath10k_core_destroy() before destroy_workqueue(). wiphy_dev_release() will finally be called in ath10k_core_destroy(). This function will free struct cfg80211_registered_device *rdev and all its members, including wiphy, dev and the pointer of sdio workqueue. Then the pointer of sdio workqueue will be set to NULL due to CONFIG_INIT_ON_FREE_DEFAULT_ON. After device release, destroy_workqueue() will use NULL pointer then the kernel panic happen. Call trace: ath10k_sdio_remove ->ath10k_core_unregister …… ->ath10k_core_stop ->ath10k_hif_stop ->ath10k_sdio_irq_disable ->ath10k_hif_power_down ->del_timer_sync(&ar_sdio->sleep_timer) ->ath10k_core_destroy ->ath10k_mac_destroy ->ieee80211_free_hw ->wiphy_free …… ->wiphy_dev_release ->destroy_workqueue Need to call destroy_workqueue() before ath10k_core_destroy(), free the work queue buffer first and then free pointer of work queue by ath10k_core_destroy(). This order matches the error path order in ath10k_sdio_probe(). No work will be queued on sdio workqueue between it is destroyed and ath10k_core_destroy() is called. Based on the call_stack above, the reason is: Only ath10k_sdio_sleep_timer_handler(), ath10k_sdio_hif_tx_sg() and ath10k_sdio_irq_disable() will queue work on sdio workqueue. Sleep timer will be deleted before ath10k_core_destroy() in ath10k_hif_power_down(). ath10k_sdio_irq_disable() only be called in ath10k_hif_stop(). ath10k_core_unregister() will call ath10k_hif_power_down() to stop hif bus, so ath10k_sdio_hif_tx_sg() won't be called anymore. Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00189 Signed-off-by: Kang Yang <quic_kangyang(a)quicinc.com> Tested-by: David Ruth <druth(a)chromium.org> Reviewed-by: David Ruth <druth(a)chromium.org> Link: https://patch.msgid.link/20241008022246.1010-1-quic_kangyang@quicinc.com Signed-off-by: Jeff Johnson <quic_jjohnson(a)quicinc.com> Conflicts: drivers/net/wireless/ath/ath10k/sdio.c Signed-off-by: Liu Mingrui <liumingrui(a)huawei.com> --- drivers/net/wireless/ath/ath10k/sdio.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index 56fbcfb80bf8..850d999615a2 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -3,6 +3,7 @@ * Copyright (c) 2004-2011 Atheros Communications Inc. * Copyright (c) 2011-2012,2017 Qualcomm Atheros, Inc. * Copyright (c) 2016-2017 Erik Stromdahl <erik.stromdahl(a)gmail.com> + * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved. */ #include <linux/module.h> @@ -2647,9 +2648,9 @@ static void ath10k_sdio_remove(struct sdio_func *func) netif_napi_del(&ar->napi); - ath10k_core_destroy(ar); - destroy_workqueue(ar_sdio->workqueue); + + ath10k_core_destroy(ar); } static const struct sdio_device_id ath10k_sdio_devices[] = { -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1 0/1] backport mainline bugfix patch
by Lin Yujun 06 Jan '25

06 Jan '25

Jinjie Ruan (1): [Backport] genirq/msi: Fix off-by-one error in msi_domain_alloc() kernel/irq/msi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.34.1

2 2

[PATCH OLK-5.10] usb: gadget: u_serial: Fix the issue that gs_start_io crashed due to accessing null pointer
by Liu Mingrui 06 Jan '25

06 Jan '25

From: Lianqin Hu <hulianqin(a)vivo.com> stable inclusion from stable-v5.10.232 commit 28b3c03a6790de1f6f2683919ad657840f0f0f58 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IBEAO8 CVE: CVE-2024-56670 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit 4cfbca86f6a8b801f3254e0e3c8f2b1d2d64be2b upstream. Considering that in some extreme cases, when u_serial driver is accessed by multiple threads, Thread A is executing the open operation and calling the gs_open, Thread B is executing the disconnect operation and calling the gserial_disconnect function,The port->port_usb pointer will be set to NULL. E.g. Thread A Thread B gs_open() gadget_unbind_driver() gs_start_io() composite_disconnect() gs_start_rx() gserial_disconnect() ... ... spin_unlock(&port->port_lock) status = usb_ep_queue() spin_lock(&port->port_lock) spin_lock(&port->port_lock) port->port_usb = NULL gs_free_requests(port->port_usb->in) spin_unlock(&port->port_lock) Crash This causes thread A to access a null pointer (port->port_usb is null) when calling the gs_free_requests function, causing a crash. If port_usb is NULL, the release request will be skipped as it will be done by gserial_disconnect. So add a null pointer check to gs_start_io before attempting to access the value of the pointer port->port_usb. Call trace: gs_start_io+0x164/0x25c gs_open+0x108/0x13c tty_open+0x314/0x638 chrdev_open+0x1b8/0x258 do_dentry_open+0x2c4/0x700 vfs_open+0x2c/0x3c path_openat+0xa64/0xc60 do_filp_open+0xb8/0x164 do_sys_openat2+0x84/0xf0 __arm64_sys_openat+0x70/0x9c invoke_syscall+0x58/0x114 el0_svc_common+0x80/0xe0 do_el0_svc+0x1c/0x28 el0_svc+0x38/0x68 Fixes: c1dca562be8a ("usb gadget: split out serial core") Cc: stable(a)vger.kernel.org Suggested-by: Prashanth K <quic_prashk(a)quicinc.com> Signed-off-by: Lianqin Hu <hulianqin(a)vivo.com> Acked-by: Prashanth K <quic_prashk(a)quicinc.com> Link: https://lore.kernel.org/r/TYUPR06MB62178DC3473F9E1A537DCD02D2362@TYUPR06MB6… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Mingrui <liumingrui(a)huawei.com> --- drivers/usb/gadget/function/u_serial.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/function/u_serial.c b/drivers/usb/gadget/function/u_serial.c index 2caccbb6e014..b3cb3bef06d2 100644 --- a/drivers/usb/gadget/function/u_serial.c +++ b/drivers/usb/gadget/function/u_serial.c @@ -569,9 +569,12 @@ static int gs_start_io(struct gs_port *port) * we didn't in gs_start_tx() */ tty_wakeup(port->port.tty); } else { - gs_free_requests(ep, head, &port->read_allocated); - gs_free_requests(port->port_usb->in, &port->write_pool, - &port->write_allocated); + /* Free reqs only if we are still connected */ + if (port->port_usb) { + gs_free_requests(ep, head, &port->read_allocated); + gs_free_requests(port->port_usb->in, &port->write_pool, + &port->write_allocated); + } status = -EIO; } -- 2.25.1

2 1

[PATCH OLK-5.10 0/1] backport mainline bugfix patch
by Lin Yujun 06 Jan '25

06 Jan '25

Jinjie Ruan (1): [Backport] genirq/msi: Fix off-by-one error in msi_domain_alloc() kernel/irq/msi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -- 2.34.1

2 2