- Kernel - mailweb.openeuler.org

在openeuler上我如何使用firewalld/nftables/iptables构建本机端口镜像
by wangpengyuan＠bjca.org.cn 10 Nov '22

10 Nov '22

iptables 版本为v1.8.7 不支持 --destination-to 和 --port-to 我如何解决这个问题？ wangpengyuan(a)bjca.org.cn

1 0

[PATCH OLK-5.10,v1,0/9] ROH: Support ROH basic functions and adapt ROH mode for RDMA/hns driver
by Ke Chen 09 Nov '22

09 Nov '22

[Description] The ROH module driver consists of the ROH Core and ROH DRV modules, which work with hardware to implement communication between nodes through HCCS packets. ROH Core is a protocol stack of the ROH architecture. It provides related services for upper layers by invoking operation interfaces provided by the ROH DRV. The ROH DRV implements the lower layer functions of the ROH featureand provides a series of interfaces for operating hardware for the ROH Core. This patch supports basic ROH functions, such as: sysfs file node query, abnormal interrupt handling, reset capability and dfx information query. RDMA/hns supports ROH mode, mainly adapted to the device id of ROH, and the different capabilities and features of RDMA/hns in ROH mode. [Testing] kernel options: CONFIG_ROH=m CONFIG_ROH_HNS=m Test passed with below step: 1. Using a hardware environment that supports ROH, insmod net/hns, RDMA/hns and ROH related drivers: insmod hnae3.ko insmod hclge.ko insmod hns3.ko insmod roh_core.ko insmod hns-roh-v1.ko insmod hns-roce-hw-v2.ko 2. Check whether ROH generates the corresponding sysfs node: ls /sys/class/roh/hns3_0/ 3. Check whether the abnormal interrupt information of roh is correct. The down or up of the network device link corresponding to roh will cause the roh abnormal interrupt count to increase. cat /proc/interrupts | grep roh 4. Configure the network port ip and check whether the ip/mac has the correct mapping relationship. 5. Query eid to check whether it complies with ip conversion rules: cat /sys/class/roh/hns3_0/node_eid 6. Use ping to check Ethernet communication is normal. 7. Use perftest to check RDMA communication is normal. 8. Use the "ethtool --reset eth1 all" command to trigger a reset. Ke Chen (9): roh/core: Add roh device sysfs node roh/hns3: Add support for roh abnormal interruption roh/core: Add support for inetaddr notifier roh/hns3: Add support for roh reset roh/hns3: Add support for roh dfx(debugfs) RDMA/hns: Add new device ID RDMA/hns: Add ROH basic configuration and check RDMA/hns: Support RDMA_CM in ROH mode RDMA/hns: Pass mac type to user driver for ROH mode drivers/infiniband/hw/hns/hns_roce_device.h | 1 + drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 35 ++ drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 1 + drivers/infiniband/hw/hns/hns_roce_main.c | 12 +- drivers/roh/core/Makefile | 2 +- drivers/roh/core/core.c | 205 ++++++++++ drivers/roh/core/core.h | 24 ++ drivers/roh/core/core_priv.h | 9 + drivers/roh/core/sysfs.c | 270 +++++++++++++ drivers/roh/hw/hns3/Makefile | 2 + drivers/roh/hw/hns3/hns3_cmdq.c | 135 +++++++ drivers/roh/hw/hns3/hns3_cmdq.h | 46 +++ drivers/roh/hw/hns3/hns3_common.h | 32 ++ drivers/roh/hw/hns3/hns3_device.h | 40 ++ drivers/roh/hw/hns3/hns3_intr.c | 136 +++++++ drivers/roh/hw/hns3/hns3_intr.h | 13 + drivers/roh/hw/hns3/hns3_main.c | 406 +++++++++++++++++++- drivers/roh/hw/hns3/hns3_verbs.c | 270 +++++++++++++ drivers/roh/hw/hns3/hns3_verbs.h | 16 + include/uapi/rdma/hns-abi.h | 2 + 20 files changed, 1651 insertions(+), 6 deletions(-) create mode 100644 drivers/roh/core/sysfs.c create mode 100644 drivers/roh/hw/hns3/hns3_device.h create mode 100644 drivers/roh/hw/hns3/hns3_intr.c create mode 100644 drivers/roh/hw/hns3/hns3_intr.h create mode 100644 drivers/roh/hw/hns3/hns3_verbs.c create mode 100644 drivers/roh/hw/hns3/hns3_verbs.h -- 2.30.0

1 9

[PATCH openEuler-5.10 1/3] Fix the header file location error and adjust the function and structure version.
by Zheng Zengkai 08 Nov '22

08 Nov '22

From: Wangming Shao <shaowangming(a)h-partners.com> driver inclusion category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5WGEF ------------------------------------------------------------------- Fixed the header file location error. Rectify the missing member and function name errors in the structure. Signed-off-by: Wangming Shao <shaowangming(a)h-partners.com> Reviewed-by: Yicong Yang <yangyicong(a)huawei.com> Reviewed-by: Yang Jihong <yangjihong1(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- tools/perf/arch/arm/util/auxtrace.c | 6 +++--- tools/perf/arch/arm/util/pmu.c | 2 +- tools/perf/arch/arm64/util/hisi-ptt.c | 7 +++---- 3 files changed, 7 insertions(+), 8 deletions(-) diff --git a/tools/perf/arch/arm/util/auxtrace.c b/tools/perf/arch/arm/util/auxtrace.c index e282fcea5e05..a4e4bb1a5711 100644 --- a/tools/perf/arch/arm/util/auxtrace.c +++ b/tools/perf/arch/arm/util/auxtrace.c @@ -10,10 +10,10 @@ #include <linux/zalloc.h> #include <api/fs/fs.h> -#include "../../util/auxtrace.h" -#include "../../util/debug.h" +#include "../../../util/auxtrace.h" +#include "../../../util/debug.h" #include "../../util/evlist.h" -#include "../../util/pmu.h" +#include "../../../util/pmu.h" #include "cs-etm.h" #include "arm-spe.h" #include "hisi-ptt.h" diff --git a/tools/perf/arch/arm/util/pmu.c b/tools/perf/arch/arm/util/pmu.c index 2223083c6825..887c8addc491 100644 --- a/tools/perf/arch/arm/util/pmu.c +++ b/tools/perf/arch/arm/util/pmu.c @@ -11,7 +11,7 @@ #include "arm-spe.h" #include "hisi-ptt.h" -#include "../../util/pmu.h" +#include "../../../util/pmu.h" struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused) diff --git a/tools/perf/arch/arm64/util/hisi-ptt.c b/tools/perf/arch/arm64/util/hisi-ptt.c index ba97c8a562a0..110b2edf3e6b 100644 --- a/tools/perf/arch/arm64/util/hisi-ptt.c +++ b/tools/perf/arch/arm64/util/hisi-ptt.c @@ -113,7 +113,6 @@ static int hisi_ptt_recording_options(struct auxtrace_record *itr, } evsel->core.attr.freq = 0; evsel->core.attr.sample_period = 1; - evsel->needs_auxtrace_mmap = true; hisi_ptt_evsel = evsel; opts->full_auxtrace = true; } @@ -126,16 +125,16 @@ static int hisi_ptt_recording_options(struct auxtrace_record *itr, * To obtain the auxtrace buffer file descriptor, the auxtrace event * must come first. */ - evlist__to_front(evlist, hisi_ptt_evsel); + perf_evlist__to_front(evlist, hisi_ptt_evsel); evsel__set_sample_bit(hisi_ptt_evsel, TIME); /* Add dummy event to keep tracking */ - err = parse_event(evlist, "dummy:u"); + err = parse_events(evlist, "dummy:u", NULL); if (err) return err; tracking_evsel = evlist__last(evlist); - evlist__set_tracking_event(evlist, tracking_evsel); + perf_evlist__set_tracking_event(evlist, tracking_evsel); tracking_evsel->core.attr.freq = 0; tracking_evsel->core.attr.sample_period = 1; -- 2.20.1

1 2

[PATCH openEuler-1.0-LTS 01/26] of: fdt: fix off-by-one error in unflatten_dt_nodes()
by Yongqiang Liu 08 Nov '22

08 Nov '22

From: Sergey Shtylyov <s.shtylyov(a)omp.ru> stable inclusion from stable-v4.19.260 commit 2566706ac6393386a4e7c4ce23fe17f4c98d9aa0 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5ZXGL CVE: NA -------------------------------- [ Upstream commit 2f945a792f67815abca26fa8a5e863ccf3fa1181 ] Commit 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") forgot to fix up the depth check in the loop body in unflatten_dt_nodes() which makes it possible to overflow the nps[] buffer... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 78c44d910d3e ("drivers/of: Fix depth when unflattening devicetree") Signed-off-by: Sergey Shtylyov <s.shtylyov(a)omp.ru> Signed-off-by: Rob Herring <robh(a)kernel.org> Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/of/fdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c index 800ad252cf9c..50b67e65159b 100644 --- a/drivers/of/fdt.c +++ b/drivers/of/fdt.c @@ -391,7 +391,7 @@ static int unflatten_dt_nodes(const void *blob, for (offset = 0; offset >= 0 && depth >= initial_depth; offset = fdt_next_node(blob, offset, &depth)) { - if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH)) + if (WARN_ON_ONCE(depth >= FDT_MAX_DEPTH - 1)) continue; if (!IS_ENABLED(CONFIG_OF_KOBJ) && -- 2.25.1

1 25

[PATCH openEuler-5.10-LTS] libbpf: Fix null-pointer dereference in find_prog_by_sec_insn()
by Zheng Zengkai 07 Nov '22

07 Nov '22

From: Shung-Hsi Yu <shung-hsi.yu(a)suse.com> maillist inclusion category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5WLXN CVE: CVE-2022-3606 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/… -------------------------------- When there are no program sections, obj->programs is left unallocated, and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL, and will cause null-pointer dereference in the following access to prog->sec_idx. Guard the search with obj->nr_programs similar to what's being done in __bpf_program__iter() to prevent null-pointer access from happening. Fixes: db2b8b06423c ("libbpf: Support CO-RE relocations for multi-prog sections") Signed-off-by: Shung-Hsi Yu <shung-hsi.yu(a)suse.com> Signed-off-by: Andrii Nakryiko <andrii(a)kernel.org> Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com Signed-off-by: Pu Lehui <pulehui(a)huawei.com> Reviewed-by: Kuohai Xu <xukuohai(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- tools/lib/bpf/libbpf.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/tools/lib/bpf/libbpf.c b/tools/lib/bpf/libbpf.c index 314fb1202d08..2b997a981052 100644 --- a/tools/lib/bpf/libbpf.c +++ b/tools/lib/bpf/libbpf.c @@ -3479,6 +3479,9 @@ static struct bpf_program *find_prog_by_sec_insn(const struct bpf_object *obj, int l = 0, r = obj->nr_programs - 1, m; struct bpf_program *prog; + if (!obj->nr_programs) + return NULL; + while (l < r) { m = l + (r - l + 1) / 2; prog = &obj->programs[m]; -- 2.20.1

1 0

[PATCH openEuler-1.0-LTS 1/3] tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
by Yongqiang Liu 07 Nov '22

07 Nov '22

From: Lu Wei <luwei32(a)huawei.com> maillist inclusion category: bugfix bugzilla: 187792, https://gitee.com/openeuler/kernel/issues/I5ZG7O Reference: https://www.spinics.net/lists/netdev/msg856902.html -------------------------------- If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code of TCPOPT_SACK_PERM is called to enable sack after data is sent and dupacks are received , it will trigger a warning in function tcp_verify_left_out() as follows: ============================================ WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132 tcp_timeout_mark_lost+0x154/0x160 tcp_enter_loss+0x2b/0x290 tcp_retransmit_timer+0x50b/0x640 tcp_write_timer_handler+0x1c8/0x340 tcp_write_timer+0xe5/0x140 call_timer_fn+0x3a/0x1b0 __run_timers.part.0+0x1bf/0x2d0 run_timer_softirq+0x43/0xb0 __do_softirq+0xfd/0x373 __irq_exit_rcu+0xf6/0x140 The warning is caused in the following steps: 1. a socket named socketA is created 2. socketA enters repair mode without build a connection 3. socketA calls connect() and its state is changed to TCP_ESTABLISHED directly 4. socketA leaves repair mode 5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup ack receives) increase 6. socketA enters repair mode again 7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack 8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out increases 9. sack_outs + lost_out > packets_out triggers since lost_out and sack_outs increase repeatly In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if Step7 not happen and the warning will not be triggered. As suggested by Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was already sent. socket-tcp tests in CRIU has been tested as follows: $ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \ --ignore-taint socket-tcp* represent all socket-tcp tests in test/zdtm/static/. Fixes: b139ba4e90dc ("tcp: Repair connection-time negotiated parameters") Signed-off-by: Lu Wei <luwei32(a)huawei.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- net/ipv4/tcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 094cd93e50c2..6f71b6cfc1b2 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2916,7 +2916,7 @@ static int do_tcp_setsockopt(struct sock *sk, int level, case TCP_REPAIR_OPTIONS: if (!tp->repair) err = -EINVAL; - else if (sk->sk_state == TCP_ESTABLISHED) + else if (sk->sk_state == TCP_ESTABLISHED && !tp->bytes_sent) err = tcp_repair_options_est(sk, (struct tcp_repair_opt __user *)optval, optlen); -- 2.25.1

1 2

[PATCH openEuler-1.0-LTS] ext4: fix bad checksum after online resize
by Yongqiang Liu 07 Nov '22

07 Nov '22

From: Baokun Li <libaokun1(a)huawei.com> hulk inclusion category: bugfix bugzilla: 187935,https://gitee.com/src-openeuler/kernel/issues/I5ZR8Z CVE: NA -------------------------------- When online resizing is performed twice consecutively, the error message "Superblock checksum does not match superblock" is displayed for the second time. Here's the reproducer: mkfs.ext4 -F /dev/sdb 100M mount /dev/sdb /tmp/test resize2fs /dev/sdb 5G resize2fs /dev/sdb 6G To solve this issue, we moved the update of the checksum after the es->s_overhead_clusters is updated. Fixes: 026d0d27c488 ("ext4: reduce computation of overhead during resize") Fixes: de394a86658f ("ext4: update s_overhead_clusters in the superblock during an on-line resize") Signed-off-by: Baokun Li <libaokun1(a)huawei.com> Reviewed-by: Zhang Yi <yi.zhang(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/ext4/resize.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index bc870561e394..f2b881aaf0b1 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1442,8 +1442,6 @@ static void ext4_update_super(struct super_block *sb, * active. */ ext4_r_blocks_count_set(es, ext4_r_blocks_count(es) + reserved_blocks); - ext4_superblock_csum_set(sb); - unlock_buffer(sbi->s_sbh); /* Update the free space counts */ percpu_counter_add(&sbi->s_freeclusters_counter, @@ -1471,6 +1469,8 @@ static void ext4_update_super(struct super_block *sb, ext4_calculate_overhead(sb); es->s_overhead_clusters = cpu_to_le32(sbi->s_overhead); + ext4_superblock_csum_set(sb); + unlock_buffer(sbi->s_sbh); if (test_opt(sb, DEBUG)) printk(KERN_DEBUG "EXT4-fs: added group %u:" "%llu blocks(%llu free %llu reserved)\n", flex_gd->count, -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/3] blktrace: introduce 'blk_trace_{start,stop}' helper
by Yongqiang Liu 07 Nov '22

07 Nov '22

From: Ye Bin <yebin10(a)huawei.com> mainline inclusion from mainline-v6.1-rc2 commit 60a9bb9048f9e95029df10a9bc346f6b066c593c category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5Z7DK CVE: NA -------------------------------- Introduce 'blk_trace_{start,stop}' helper. No functional changed. Signed-off-by: Ye Bin <yebin10(a)huawei.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Link: https://lore.kernel.org/r/20221019033602.752383-2-yebin@huaweicloud.com Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflicts: kernel/trace/blktrace.c Signed-off-by: Ye Bin <yebin(a)huaweicloud.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- kernel/trace/blktrace.c | 74 ++++++++++++++++++++--------------------- 1 file changed, 36 insertions(+), 38 deletions(-) diff --git a/kernel/trace/blktrace.c b/kernel/trace/blktrace.c index b1aa8c74442c..9cc04b09c42f 100644 --- a/kernel/trace/blktrace.c +++ b/kernel/trace/blktrace.c @@ -334,6 +334,37 @@ static void put_probe_ref(void) mutex_unlock(&blk_probe_mutex); } +static int blk_trace_start(struct blk_trace *bt) +{ + if (bt->trace_state != Blktrace_setup && + bt->trace_state != Blktrace_stopped) + return -EINVAL; + + blktrace_seq++; + smp_mb(); + bt->trace_state = Blktrace_running; + spin_lock_irq(&running_trace_lock); + list_add(&bt->running_list, &running_trace_list); + spin_unlock_irq(&running_trace_lock); + trace_note_time(bt); + + return 0; +} + +static int blk_trace_stop(struct blk_trace *bt) +{ + if (bt->trace_state != Blktrace_running) + return -EINVAL; + + bt->trace_state = Blktrace_stopped; + spin_lock_irq(&running_trace_lock); + list_del_init(&bt->running_list); + spin_unlock_irq(&running_trace_lock); + relay_flush(bt->rchan); + + return 0; +} + static void blk_trace_cleanup(struct blk_trace *bt) { synchronize_rcu(); @@ -652,7 +683,6 @@ static int compat_blk_trace_setup(struct request_queue *q, char *name, static int __blk_trace_startstop(struct request_queue *q, int start) { - int ret; struct blk_trace *bt; bt = rcu_dereference_protected(q->blk_trace, @@ -660,36 +690,10 @@ static int __blk_trace_startstop(struct request_queue *q, int start) if (bt == NULL) return -EINVAL; - /* - * For starting a trace, we can transition from a setup or stopped - * trace. For stopping a trace, the state must be running - */ - ret = -EINVAL; - if (start) { - if (bt->trace_state == Blktrace_setup || - bt->trace_state == Blktrace_stopped) { - blktrace_seq++; - smp_mb(); - bt->trace_state = Blktrace_running; - spin_lock_irq(&running_trace_lock); - list_add(&bt->running_list, &running_trace_list); - spin_unlock_irq(&running_trace_lock); - - trace_note_time(bt); - ret = 0; - } - } else { - if (bt->trace_state == Blktrace_running) { - bt->trace_state = Blktrace_stopped; - spin_lock_irq(&running_trace_lock); - list_del_init(&bt->running_list); - spin_unlock_irq(&running_trace_lock); - relay_flush(bt->rchan); - ret = 0; - } - } - - return ret; + if (start) + return blk_trace_start(bt); + else + return blk_trace_stop(bt); } int blk_trace_startstop(struct request_queue *q, int start) @@ -1657,13 +1661,7 @@ static int blk_trace_remove_queue(struct request_queue *q) if (bt == NULL) return -EINVAL; - if (bt->trace_state == Blktrace_running) { - bt->trace_state = Blktrace_stopped; - spin_lock_irq(&running_trace_lock); - list_del_init(&bt->running_list); - spin_unlock_irq(&running_trace_lock); - relay_flush(bt->rchan); - } + blk_trace_stop(bt); put_probe_ref(); synchronize_rcu(); -- 2.25.1

1 2

[PATCH openEuler-1.0-LTS 1/2] io_uring/af_unix: defer registered files gc to io_uring release
by Yongqiang Liu 07 Nov '22

07 Nov '22

From: Pavel Begunkov <asml.silence(a)gmail.com> mainline inclusion from mainline-v6.1-rc1 commit 0091bfc81741b8d3aeb3b7ab8636f911b2de6e80 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/I5WFKI CVE: CVE-2022-2602 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?h… -------------------------------- Instead of putting io_uring's registered files in unix_gc() we want it to be done by io_uring itself. The trick here is to consider io_uring registered files for cycle detection but not actually putting them down. Because io_uring can't register other ring instances, this will remove all refs to the ring file triggering the ->release path and clean up with io_ring_ctx_free(). Cc: stable(a)vger.kernel.org Fixes: 6b06314c47e1 ("io_uring: add file set registration") Reported-and-tested-by: David Bouman <dbouman03(a)gmail.com> Signed-off-by: Pavel Begunkov <asml.silence(a)gmail.com> Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo(a)canonical.com> [axboe: add kerneldoc comment to skb, fold in skb leak fix] Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: fs/io_uring.c include/linux/skbuff.h Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Reviewed-by: Yue Haibing <yuehaibing(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- fs/io_uring.c | 1 + include/linux/skbuff.h | 3 +++ net/unix/garbage.c | 20 ++++++++++++++++++++ 3 files changed, 24 insertions(+) diff --git a/fs/io_uring.c b/fs/io_uring.c index d4e430b51098..7d7af6a0ef96 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -6835,6 +6835,7 @@ static int __io_sqe_files_scm(struct io_ring_ctx *ctx, int nr, int offset) } skb->sk = sk; + skb->scm_io_uring = 1; nr_files = 0; fpl->user = get_uid(ctx->user); diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index dbdb03ac557f..4524bef053b8 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -654,6 +654,7 @@ typedef unsigned char *sk_buff_data_t; * @transport_header: Transport layer header * @network_header: Network layer header * @mac_header: Link layer header + * @scm_io_uring: SKB holds io_uring registered files * @tail: Tail pointer * @end: End pointer * @head: Head of buffer @@ -800,6 +801,8 @@ struct sk_buff { __u8 decrypted:1; #endif + __u8 scm_io_uring:1; + #ifdef CONFIG_NET_SCHED __u16 tc_index; /* traffic control index */ #endif diff --git a/net/unix/garbage.c b/net/unix/garbage.c index 4d283e26d816..5c9ff8df9136 100644 --- a/net/unix/garbage.c +++ b/net/unix/garbage.c @@ -209,6 +209,7 @@ void wait_for_unix_gc(void) /* The external entry point: unix_gc() */ void unix_gc(void) { + struct sk_buff *next_skb, *skb; struct unix_sock *u; struct unix_sock *next; struct sk_buff_head hitlist; @@ -302,11 +303,30 @@ void unix_gc(void) spin_unlock(&unix_gc_lock); + /* We need io_uring to clean its registered files, ignore all io_uring + * originated skbs. It's fine as io_uring doesn't keep references to + * other io_uring instances and so killing all other files in the cycle + * will put all io_uring references forcing it to go through normal + * release.path eventually putting registered files. + */ + skb_queue_walk_safe(&hitlist, skb, next_skb) { + if (skb->scm_io_uring) { + __skb_unlink(skb, &hitlist); + skb_queue_tail(&skb->sk->sk_receive_queue, skb); + } + } + /* Here we are. Hitlist is filled. Die. */ __skb_queue_purge(&hitlist); spin_lock(&unix_gc_lock); + /* There could be io_uring registered files, just push them back to + * the inflight list + */ + list_for_each_entry_safe(u, next, &gc_candidates, link) + list_move_tail(&u->link, &gc_inflight_list); + /* All candidates should have been detached by now. */ BUG_ON(!list_empty(&gc_candidates)); -- 2.25.1

1 1

[PATCH openEuler-1.0-LTS 1/3] nbd: remove the call to set_blocksize
by Yongqiang Liu 07 Nov '22

07 Nov '22

From: Christoph Hellwig <hch(a)lst.de> mainline inclusion from mainline-v5.11-rc1 commit ee4bf648635055d2b76afadaf34236c8b2d852a7 category: bugfix bugzilla: 187706,https://gitee.com/openeuler/kernel/issues/I5XEBX CVE: NA ---------------------------------------- Block driver have no business setting the file system concept of a block size. Signed-off-by: Christoph Hellwig <hch(a)lst.de> Reviewed-by: Josef Bacik <josef(a)toxicpanda.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> conflicts: drivers/block/nbd.c Signed-off-by: Zhong Jinghua <zhongjinghua(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Reviewed-by: Yu Kuai <yukuai3(a)huawei.com> Signed-off-by: Yongqiang Liu <liuyongqiang13(a)huawei.com> --- drivers/block/nbd.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index 6834ba0e7e2c..4d162a92dffc 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -298,7 +298,7 @@ static void nbd_size_clear(struct nbd_device *nbd) } } -static void nbd_size_update(struct nbd_device *nbd, bool start) +static void nbd_size_update(struct nbd_device *nbd) { struct nbd_config *config = nbd->config; struct block_device *bdev = bdget_disk(nbd->disk, 0); @@ -312,11 +312,9 @@ static void nbd_size_update(struct nbd_device *nbd, bool start) blk_queue_physical_block_size(nbd->disk->queue, config->blksize); set_capacity(nbd->disk, config->bytesize >> 9); if (bdev) { - if (bdev->bd_disk) { + if (bdev->bd_disk) bd_set_size(bdev, config->bytesize); - if (start) - set_blocksize(bdev, config->blksize); - } else + else bdev->bd_invalidated = 1; bdput(bdev); } @@ -330,7 +328,7 @@ static void nbd_size_set(struct nbd_device *nbd, loff_t blocksize, config->blksize = blocksize; config->bytesize = blocksize * nr_blocks; if (nbd->pid) - nbd_size_update(nbd, false); + nbd_size_update(nbd); } static void nbd_complete_rq(struct request *req) @@ -1333,7 +1331,7 @@ static int nbd_start_device(struct nbd_device *nbd) args->index = i; queue_work(nbd->recv_workq, &args->work); } - nbd_size_update(nbd, true); + nbd_size_update(nbd); return error; } -- 2.25.1

1 2

2024

2023

2022

2021

2020

2019

Kernel