- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] usb: gadget: rndis: Fix info leak of rndis
by Zheng Zengkai 22 Jul '21

22 Jul '21

From: Wang Hai <wanghai38(a)huawei.com> hulk inclusion category: bugfix bugzilla: 172330 CVE: HWPSIRT-2021-84477 -------------------------------- We can construct some special USB packets that cause kernel info leak by the following steps of rndis. 1. construct the packet to make rndis call gen_ndis_set_resp(). In gen_ndis_set_resp(), BufOffset comes from the USB packet and it is not checked so that BufOffset can be any value. Therefore, if OID is RNDIS_OID_GEN_CURRENT_PACKET_FILTER, then *params->filter can get data at any address. 2. construct the packet to make rndis call rndis_query_response(). In rndis_query_response(), if OID is RNDIS_OID_GEN_CURRENT_PACKET_FILTER, then the data of *params->filter is fetched and returned, resulting in info leak. Therefore, we need to check the BufOffset to prevent info leak. Here, buf size is USB_COMP_EP0_BUFSIZ, as long as "8 + BufOffset + BufLength" is less than USB_COMP_EP0_BUFSIZ, it will be considered legal. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Wang Hai <wanghai38(a)huawei.com> Reviewed-by: Wei Yongjun <weiyongjun1(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Zheng Zengkai <zhengzengkai(a)huawei.com> --- drivers/usb/gadget/composite.c | 2 +- drivers/usb/gadget/function/rndis.c | 37 +++++++++++++++++++++++++---- 2 files changed, 34 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 1a556a628971..7f963bb1c59b 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -2157,7 +2157,7 @@ int composite_dev_prepare(struct usb_composite_driver *composite, if (!cdev->req) return -ENOMEM; - cdev->req->buf = kmalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); + cdev->req->buf = kzalloc(USB_COMP_EP0_BUFSIZ, GFP_KERNEL); if (!cdev->req->buf) goto fail; diff --git a/drivers/usb/gadget/function/rndis.c b/drivers/usb/gadget/function/rndis.c index 64de9f1b874c..9ea94215e113 100644 --- a/drivers/usb/gadget/function/rndis.c +++ b/drivers/usb/gadget/function/rndis.c @@ -506,6 +506,10 @@ static int gen_ndis_set_resp(struct rndis_params *params, u32 OID, switch (OID) { case RNDIS_OID_GEN_CURRENT_PACKET_FILTER: + if (buf_len < 2) { + pr_err("%s:Not support for buf_len < 2\n", __func__); + break; + } /* these NDIS_PACKET_TYPE_* bitflags are shared with * cdc_filter; it's not RNDIS-specific @@ -592,6 +596,7 @@ static int rndis_query_response(struct rndis_params *params, rndis_query_msg_type *buf) { rndis_query_cmplt_type *resp; + u32 BufOffset, BufLength; rndis_resp_t *r; /* pr_debug("%s: OID = %08X\n", __func__, cpu_to_le32(buf->OID)); */ @@ -612,12 +617,25 @@ static int rndis_query_response(struct rndis_params *params, resp->MessageType = cpu_to_le32(RNDIS_MSG_QUERY_C); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + BufOffset = le32_to_cpu(buf->InformationBufferOffset); + BufLength = le32_to_cpu(buf->InformationBufferLength); + + /* + * If the address of the buf to be accessed exceeds the valid + * range of the buf, then return RNDIS_STATUS_NOT_SUPPORTED. + */ + if (8 + BufOffset + BufLength >= USB_COMP_EP0_BUFSIZ) { + resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); + resp->MessageLength = cpu_to_le32(sizeof(*resp)); + resp->InformationBufferLength = cpu_to_le32(0); + resp->InformationBufferOffset = cpu_to_le32(0); + params->resp_avail(params->v); + return 0; + } if (gen_ndis_query_resp(params, le32_to_cpu(buf->OID), - le32_to_cpu(buf->InformationBufferOffset) - + 8 + (u8 *)buf, - le32_to_cpu(buf->InformationBufferLength), - r)) { + BufOffset + 8 + (u8 *)buf, BufLength, + r)) { /* OID not supported */ resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); resp->MessageLength = cpu_to_le32(sizeof *resp); @@ -660,6 +678,17 @@ static int rndis_set_response(struct rndis_params *params, resp->MessageType = cpu_to_le32(RNDIS_MSG_SET_C); resp->MessageLength = cpu_to_le32(16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ + + /* + * If the address of the buf to be accessed exceeds the valid + * range of the buf, then return RNDIS_STATUS_NOT_SUPPORTED. + */ + if (8 + BufOffset + BufLength >= USB_COMP_EP0_BUFSIZ) { + resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); + params->resp_avail(params->v); + return 0; + } + if (gen_ndis_set_resp(params, le32_to_cpu(buf->OID), ((u8 *)buf) + 8 + BufOffset, BufLength, r)) resp->Status = cpu_to_le32(RNDIS_STATUS_NOT_SUPPORTED); -- 2.20.1

1 0

[PATCH openEuler-21.09 000/147] crypto: hisilicon - ACC add new feature
by Zheng Zengkai 22 Jul '21

22 Jul '21

crypto: hisilicon - ACC add new feature and bugfix. Colin Ian King (1): crypto: hisilicon/sec - Fix spelling mistake "fallbcak" -> "fallback" Eric Biggers (1): crypto: sha - split sha.h into sha1.h and sha2.h Hao Fang (1): crypto: hisilicon - use the correct HiSilicon copyright Hui Tang (37): crypto: hisilicon/hpre - delete ECC 1bit error reported threshold crypto: hisilicon/hpre - add two RAS correctable errors processing crypto: hisilicon/hpre - add ecc algorithm inqury for uacce device crypto: hisilicon/hpre - adapt the number of clusters crypto: hisilicon/hpre - tiny fix crypto: hisilicon/hpre - enable Elliptic curve cryptography crypto: hisilicon/hpre - delete wrap of 'CONFIG_CRYPTO_DH' crypto: hisilicon/hpre - optimise 'hpre_algs_register' error path crypto: hisilicon - fix the check on dma address crypto: hisilicon/hpre - fix "hpre_ctx_init" resource leak crypto: hisilicon/hpre - fix Kconfig crypto: hisilicon/hpre - fix PASID setting on kunpeng 920 crypto: hisilicon/hpre - fix a typo and delete redundant blank line crypto: hisilicon/hpre - delete redundant '\n' crypto: hisilicon/hpre - delete the rudundant space after return crypto: hisilicon/hpre - use the correct variable type crypto: hisilicon/hpre - add debug log crypto: hisilicon/hpre - delete redundant log and return in advance crypto: testmgr - fix initialization of 'secret_size' crypto: ecdh - extend 'cra_driver_name' with curve name crypto: hisilicon/hpre - extend 'cra_driver_name' with curve name crypto: hisilicon/hpre - fix unmapping invalid dma address crypto: hisilicon/hpre - the macro 'HPRE_ADDR' expands crypto: hisilicon/hpre - init a structure member each line crypto: hisilicon/hpre - replace macro with inline function crypto: hisilicon/hpre - remove the macro of 'HPRE_DEV' crypto: hisilicon/hpre - delete rudundant initialization crypto: hisilicon/hpre - use 'GENMASK' to generate mask value crypto: hisilicon/hpre - delete rudundant macro definition crypto: hisilicon/hpre - add 'default' for switch statement crypto: ecdh - fix ecdh-nist-p192's entry in testmgr crypto: ecdh - fix 'ecdh_init' crypto: ecdh - register NIST P384 tfm crypto: ecdh - add test suite for NIST P384 crypto: hisilicon/hpre - fix ecdh self test issue crypto: hisilicon/hpre - add check before gx modulo p crypto: hisilicon/hpre - register ecdh NIST P384 Kai Ye (36): crypto: hisilicon/sec2 - Fix aead authentication setting key error uacce: delete some redundant code. uacce: modify the module author information. crypto: hisilicon/qm - SVA bugfixed on Kunpeng920 crypto: hisilicon - add ZIP device using mode parameter crypto: hisilicon/hpre - register HPRE device to uacce crypto: hisilicon/sec - register SEC device to uacce uacce: delete unneeded variable initialization crypto: hisilicon/sec - fixup checking the 3DES weak key crypto: hisilicon/qm - delete redundant code crypto: hisilicon/sec - use the correct print format crypto: hisilicon/sgl - add a comment for block size initialization crypto: hisilicon/sgl - delete unneeded variable initialization crypto: hisilicon/sgl - add some dfx logs crypto: hisilicon/sgl - fix the soft sg map to hardware sg crypto: hisilicon/sgl - fix the sg buf unmap crypto: hisilicon/qm - add dfx log if not use hardware crypto algs crypto: hisilicon/qm - fix the process of VF's list adding crypto: hisilicon/sec - add new type of SQE crypto: hisilicon/sec - driver adapt to new SQE crypto: hisilicon/sec - add new skcipher mode for SEC crypto: hisilicon/sec - add fallback tfm supporting for XTS mode crypto: hisilicon/sec - fixup 3des minimum key size declaration crypto: hisilicon/sec - add new algorithm mode for AEAD crypto: hisilicon/sec - add fallback tfm supporting for aeads crypto: hisilicon/sec - add hardware integrity check value process crypto: hisilicon/sec - modify the SEC request structure uacce: add print information if not enable sva crypto: hisilicon/qm - supports writing QoS int the host crypto: hisilicon/qm - add the "alg_qos" file node crypto: hisilicon/qm - merges the work initialization process into a single function crypto: hisilicon/qm - add pf ping single vf function crypto: hisilicon/qm - supports to inquiry each function's QoS crypto: hisilicon/sec - adds the max shaper type rate crypto: hisilicon/hpre - adds the max shaper type rate crypto: hisilicon/zip - adds the max shaper type rate Lee Jones (1): crypto: hisilicon/sec - Supply missing description for 'sec_queue_empty()'s 'queue' param Longfang Liu (7): crypto: hisilicon - delete unused structure member variables crypto: hisilicon - fixes some coding style crypto: hisilicon/sec - fixes some coding style crypto: hisilicon/sec - fixes some driver coding style crypto: hisilicon/sec - Fixes AES algorithm mode parameter problem crypto: hisilicon/sec - Fix a module parameter error crypto: hisilicon/qm - support address prefetching Meng Yu (10): crypto: hisilicon/hpre - add version adapt to new algorithms crypto: hisilicon/hpre - add algorithm type crypto: ecdh - move curve_id of ECDH from the key to algorithm name crypto: ecc - expose ecc curves crypto: ecc - add curve25519 params and expose them crypto: hisilicon/hpre - add 'ECDH' algorithm crypto: hisilicon/hpre - add 'CURVE25519' algorithm crypto: ecc - Correct an error in the comments crypto: hisilicon/hpre - Add processing of src_data in 'CURVE25519' crypto: ecc - delete a useless function declaration Ruiqi Gong (1): crypto: hisilicon/hpre - fix a typo in hpre_crypto.c Saulo Alessandre (3): crypto: ecc - Add NIST P384 curve parameters crypto: ecc - Add math to support fast NIST P384 crypto: ecdsa - Register NIST P384 and extend test suite Shiju Jose (1): crypto: hisilicon - Fix doc warnings in sgl.c and qm.c Sihang Chen (1): crypto: hisilicon/qm - update irqflag Stefan Berger (2): oid_registry: Add OIDs for ECDSA with SHA224/256/384/512 crypto: ecdsa - Add support for ECDSA signature verification Weili Qian (37): crypto: hisilicon/qm - numbers are replaced by macros crypto: hisilicon/qm - modify the return type of function crypto: hisilicon/qm - modify the return type of debugfs interface crypto: hisilicon/qm - modify return type of 'qm_set_sqctype' crypto: hisilicon/qm - replace 'sprintf' with 'scnprintf' crypto: hisilicon/qm - split 'qm_qp_ctx_cfg' into smaller pieces crypto: hisilicon/qm - split 'qm_eq_ctx_cfg' into smaller pieces crypto: hisilicon/qm - split 'hisi_qm_init' into smaller pieces hwrng: hisi - remove HiSilicon TRNG driver crypto: hisilicon/trng - add HiSilicon TRNG driver support crypto: hisilicon/trng - add support for PRNG crypto: hisilicon/qm - fix use of 'dma_map_single' crypto: hisilicon - PASID fixed on Kunpeng 930 crypto: hisilicon/qm - removing driver after reset crypto: hisilicon/qm - fix request missing error crypto: hisilicon/qm - fix the value of 'QM_SQC_VFT_BASE_MASK_V2' crypto: hisilicon/qm - do not reset hardware when CE happens crypto: hisilicon/qm - fix printing format issue crypto: hisilicon/qm - set the total number of queues crypto: hisilicon/qm - move 'CURRENT_QM' code to qm.c crypto: hisilicon/qm - set the number of queues for function crypto: hisilicon/qm - add queue isolation support for Kunpeng930 crypto: hisilicon/qm - add stop queue by hardware crypto: hisilicon/trng - add version to adapt new algorithm crypto: hisilicon - dynamic configuration 'err_info' crypto: hisilicon - support new error types for ZIP crypto: hisilicon - add new error type for SEC crypto: hisilicon - enable new error types for QM crypto: hisilicon/qm - initialize the device before doing tasks crypto: hisilicon/qm - modify 'QM_RESETTING' clearing error crypto: hisilicon/qm - adjust order of device error configuration crypto: hisilicon/qm - enable to close master ooo when NFE occurs crypto: hisilicon/qm - add MSI detection steps on Kunpeng930 crypto: hisilicon/qm - adjust reset interface crypto: hisilicon/qm - enable PF and VFs communication crypto: hisilicon/qm - add callback to support communication crypto: hisilicon/qm - update reset flow Wenkai Lin (1): crypto: hisilicon/qm - implement for querying hardware tasks status. Yang Shen (5): crypto: hisilicon/zip - add a work_queue for zip irq crypto: hisilicon/zip - adjust functions location crypto: hisilicon/zip - add comments for 'hisi_zip_sqe' crypto: hisilicon/zip - initialize operations about 'sqe' in 'acomp_alg.init' crypto: hisilicon/zip - support new 'sqe' type in Kunpeng930 Yejune Deng (1): crypto: hisilicon/trng - replace atomic_add_return() Zou Wei (1): crypto: hisilicon - switch to memdup_user_nul() arch/arm/crypto/sha1-ce-glue.c | 2 +- arch/arm/crypto/sha1.h | 2 +- arch/arm/crypto/sha1_glue.c | 2 +- arch/arm/crypto/sha1_neon_glue.c | 2 +- arch/arm/crypto/sha2-ce-glue.c | 2 +- arch/arm/crypto/sha256_glue.c | 2 +- arch/arm/crypto/sha256_neon_glue.c | 2 +- arch/arm/crypto/sha512-glue.c | 2 +- arch/arm/crypto/sha512-neon-glue.c | 2 +- arch/arm64/configs/defconfig | 1 + arch/arm64/crypto/aes-glue.c | 2 +- arch/arm64/crypto/sha1-ce-glue.c | 2 +- arch/arm64/crypto/sha2-ce-glue.c | 2 +- arch/arm64/crypto/sha256-glue.c | 2 +- arch/arm64/crypto/sha512-ce-glue.c | 2 +- arch/arm64/crypto/sha512-glue.c | 2 +- arch/mips/cavium-octeon/crypto/octeon-sha1.c | 2 +- .../mips/cavium-octeon/crypto/octeon-sha256.c | 2 +- .../mips/cavium-octeon/crypto/octeon-sha512.c | 2 +- arch/powerpc/crypto/sha1-spe-glue.c | 2 +- arch/powerpc/crypto/sha1.c | 2 +- arch/powerpc/crypto/sha256-spe-glue.c | 2 +- arch/s390/crypto/sha.h | 3 +- arch/s390/crypto/sha1_s390.c | 2 +- arch/s390/crypto/sha256_s390.c | 2 +- arch/s390/crypto/sha3_256_s390.c | 1 - arch/s390/crypto/sha3_512_s390.c | 1 - arch/s390/crypto/sha512_s390.c | 2 +- arch/s390/purgatory/purgatory.c | 2 +- arch/sparc/crypto/sha1_glue.c | 2 +- arch/sparc/crypto/sha256_glue.c | 2 +- arch/sparc/crypto/sha512_glue.c | 2 +- arch/x86/crypto/sha1_ssse3_glue.c | 2 +- arch/x86/crypto/sha256_ssse3_glue.c | 2 +- arch/x86/crypto/sha512_ssse3_glue.c | 2 +- arch/x86/purgatory/purgatory.c | 2 +- crypto/Kconfig | 10 + crypto/Makefile | 6 + crypto/asymmetric_keys/asym_tpm.c | 2 +- crypto/ecc.c | 291 +- crypto/ecc.h | 49 +- crypto/ecc_curve_defs.h | 49 + crypto/ecdh.c | 117 +- crypto/ecdh_helper.c | 4 +- crypto/ecdsa.c | 376 +++ crypto/ecdsasignature.asn1 | 4 + crypto/sha1_generic.c | 2 +- crypto/sha256_generic.c | 2 +- crypto/sha512_generic.c | 2 +- crypto/testmgr.c | 35 +- crypto/testmgr.h | 527 +++- drivers/char/hw_random/Kconfig | 13 - drivers/char/hw_random/Makefile | 1 - drivers/char/hw_random/hisi-trng-v2.c | 99 - drivers/char/random.c | 2 +- drivers/crypto/allwinner/sun4i-ss/sun4i-ss.h | 2 +- .../crypto/allwinner/sun8i-ce/sun8i-ce-hash.c | 3 +- drivers/crypto/allwinner/sun8i-ce/sun8i-ce.h | 3 +- .../crypto/allwinner/sun8i-ss/sun8i-ss-hash.c | 3 +- drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h | 3 +- drivers/crypto/amcc/crypto4xx_alg.c | 2 +- drivers/crypto/amcc/crypto4xx_core.c | 2 +- drivers/crypto/atmel-authenc.h | 3 +- drivers/crypto/atmel-ecc.c | 28 +- drivers/crypto/atmel-sha.c | 3 +- drivers/crypto/axis/artpec6_crypto.c | 3 +- drivers/crypto/bcm/cipher.c | 3 +- drivers/crypto/bcm/cipher.h | 3 +- drivers/crypto/bcm/spu.h | 3 +- drivers/crypto/caam/compat.h | 3 +- drivers/crypto/cavium/nitrox/nitrox_aead.c | 1 - drivers/crypto/ccp/ccp-crypto-sha.c | 3 +- drivers/crypto/ccp/ccp-crypto.h | 3 +- drivers/crypto/ccree/cc_driver.h | 3 +- drivers/crypto/chelsio/chcr_algo.c | 3 +- drivers/crypto/hisilicon/Kconfig | 10 + drivers/crypto/hisilicon/Makefile | 1 + drivers/crypto/hisilicon/hpre/hpre.h | 26 +- drivers/crypto/hisilicon/hpre/hpre_crypto.c | 1052 ++++++- drivers/crypto/hisilicon/hpre/hpre_main.c | 489 +-- drivers/crypto/hisilicon/qm.c | 2716 +++++++++++++---- drivers/crypto/hisilicon/qm.h | 81 +- drivers/crypto/hisilicon/sec/sec_algs.c | 2 +- drivers/crypto/hisilicon/sec/sec_drv.c | 13 +- drivers/crypto/hisilicon/sec/sec_drv.h | 2 +- drivers/crypto/hisilicon/sec2/sec.h | 35 +- drivers/crypto/hisilicon/sec2/sec_crypto.c | 1170 +++++-- drivers/crypto/hisilicon/sec2/sec_crypto.h | 199 +- drivers/crypto/hisilicon/sec2/sec_main.c | 415 ++- drivers/crypto/hisilicon/sgl.c | 39 +- drivers/crypto/hisilicon/trng/Makefile | 2 + drivers/crypto/hisilicon/trng/trng.c | 341 +++ drivers/crypto/hisilicon/zip/zip.h | 50 +- drivers/crypto/hisilicon/zip/zip_crypto.c | 710 +++-- drivers/crypto/hisilicon/zip/zip_main.c | 249 +- drivers/crypto/img-hash.c | 3 +- drivers/crypto/inside-secure/safexcel.h | 3 +- .../crypto/inside-secure/safexcel_cipher.c | 3 +- drivers/crypto/inside-secure/safexcel_hash.c | 3 +- drivers/crypto/ixp4xx_crypto.c | 2 +- drivers/crypto/marvell/cesa/hash.c | 3 +- .../crypto/marvell/octeontx/otx_cptvf_algs.c | 3 +- drivers/crypto/mediatek/mtk-sha.c | 3 +- drivers/crypto/mxs-dcp.c | 3 +- drivers/crypto/n2_core.c | 3 +- drivers/crypto/nx/nx-sha256.c | 2 +- drivers/crypto/nx/nx-sha512.c | 2 +- drivers/crypto/nx/nx.c | 2 +- drivers/crypto/omap-sham.c | 3 +- drivers/crypto/padlock-sha.c | 3 +- drivers/crypto/picoxcell_crypto.c | 3 +- drivers/crypto/qat/qat_common/qat_algs.c | 3 +- drivers/crypto/qce/common.c | 3 +- drivers/crypto/qce/core.c | 1 - drivers/crypto/qce/sha.h | 3 +- drivers/crypto/rockchip/rk3288_crypto.h | 3 +- drivers/crypto/s5p-sss.c | 3 +- drivers/crypto/sa2ul.c | 3 +- drivers/crypto/sa2ul.h | 2 + drivers/crypto/sahara.c | 3 +- drivers/crypto/stm32/stm32-hash.c | 3 +- drivers/crypto/talitos.c | 3 +- drivers/crypto/ux500/hash/hash_core.c | 3 +- drivers/firmware/efi/embedded-firmware.c | 2 +- drivers/misc/uacce/uacce.c | 26 +- .../inline_crypto/ch_ipsec/chcr_ipsec.c | 3 +- .../chelsio/inline_crypto/chtls/chtls.h | 3 +- drivers/nfc/s3fwrn5/firmware.c | 2 +- drivers/tee/tee_core.c | 2 +- fs/crypto/fname.c | 2 +- fs/crypto/hkdf.c | 2 +- fs/ubifs/auth.c | 1 - fs/verity/fsverity_private.h | 2 +- include/crypto/ecc_curve.h | 60 + include/crypto/ecdh.h | 3 +- include/crypto/hash_info.h | 3 +- include/crypto/sha1.h | 46 + include/crypto/sha1_base.h | 2 +- include/crypto/{sha.h => sha2.h} | 41 +- include/crypto/sha256_base.h | 2 +- include/crypto/sha512_base.h | 2 +- include/linux/ccp.h | 3 +- include/linux/filter.h | 2 +- include/linux/oid_registry.h | 6 +- include/linux/purgatory.h | 2 +- include/uapi/misc/uacce/hisi_qm.h | 1 + kernel/crash_core.c | 2 +- kernel/kexec_core.c | 1 - kernel/kexec_file.c | 2 +- lib/crypto/sha256.c | 2 +- lib/digsig.c | 2 +- lib/sha1.c | 2 +- net/bluetooth/ecdh_helper.c | 2 - net/bluetooth/selftest.c | 2 +- net/bluetooth/smp.c | 6 +- net/ipv6/seg6_hmac.c | 1 - net/mptcp/crypto.c | 2 +- net/mptcp/options.c | 2 +- net/mptcp/subflow.c | 2 +- security/integrity/integrity.h | 2 +- security/keys/encrypted-keys/encrypted.c | 2 +- security/keys/trusted-keys/trusted_tpm1.c | 2 +- sound/soc/codecs/cros_ec_codec.c | 2 +- 163 files changed, 7589 insertions(+), 2085 deletions(-) create mode 100644 crypto/ecdsa.c create mode 100644 crypto/ecdsasignature.asn1 delete mode 100644 drivers/char/hw_random/hisi-trng-v2.c create mode 100644 drivers/crypto/hisilicon/trng/Makefile create mode 100644 drivers/crypto/hisilicon/trng/trng.c create mode 100644 include/crypto/ecc_curve.h create mode 100644 include/crypto/sha1.h rename include/crypto/{sha.h => sha2.h} (77%) -- 2.20.1

1 143

[PATCH openEuler-1.0-LTS] ARM: footbridge: remove personal server platform
by Yang Yingliang 21 Jul '21

21 Jul '21

From: Russell King <rmk+kernel(a)armlinux.org.uk> mainline inclusion from mainline-v5.13-rc1 commit 298a58e165e447ccfaae35fe9f651f9d7e15166f category: bugfix bugzilla: NA CVE: CVE-2021-32078 -------------------------------- Remove the personal server platform, as that has had an array overrun issue identified. It is believed that no one is using this code. Signed-off-by: Russell King <rmk+kernel(a)armlinux.org.uk> Conflicts: arch/arm/mach-footbridge/Kconfig arch/arm/mach-footbridge/personal-pci.c Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm/configs/footbridge_defconfig | 1 - arch/arm/mach-footbridge/Kconfig | 21 --------- arch/arm/mach-footbridge/Makefile | 2 - arch/arm/mach-footbridge/personal-pci.c | 58 ------------------------- arch/arm/mach-footbridge/personal.c | 25 ----------- 5 files changed, 107 deletions(-) delete mode 100644 arch/arm/mach-footbridge/personal-pci.c delete mode 100644 arch/arm/mach-footbridge/personal.c diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 3a7938f244e56..2aa3ebeb89d7f 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -7,7 +7,6 @@ CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_CATS=y -CONFIG_ARCH_PERSONAL_SERVER=y CONFIG_ARCH_EBSA285_HOST=y CONFIG_ARCH_NETWINDER=y CONFIG_LEDS=y diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index cbbdd84cf49ad..84c400f96aa21 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -15,27 +15,6 @@ config ARCH_CATS Saying N will reduce the size of the Footbridge kernel. -config ARCH_PERSONAL_SERVER - bool "Compaq Personal Server" - select FOOTBRIDGE_HOST - select ISA - select ISA_DMA - select PCI - ---help--- - Say Y here if you intend to run this kernel on the Compaq - Personal Server. - - Saying N will reduce the size of the Footbridge kernel. - - The Compaq Personal Server is not available for purchase. - There are no product plans beyond the current research - prototypes at this time. Information is available at: - - <http://www.crl.hpl.hp.com/projects/personalserver/> - - If you have any questions or comments about the Compaq Personal - Server, send e-mail to <skiff(a)crl.dec.com>. - config ARCH_EBSA285_ADDIN bool "EBSA285 (addin mode)" select ARCH_EBSA285 diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index a09f1041f1413..6262993c05558 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -11,12 +11,10 @@ pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o -pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o -obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c deleted file mode 100644 index 4391e433a4b2f..0000000000000 --- a/arch/arm/mach-footbridge/personal-pci.c +++ /dev/null @@ -1,58 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-footbridge/personal-pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -static int irqmap_personal_server[] __initdata = { - IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0, - IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI -}; - -static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot, - u8 pin) -{ - unsigned char line; - - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); - - if (line > 0x40 && line <= 0x5f) { - /* line corresponds to the bit controlling this interrupt - * in the footbridge. Ignore the first 8 interrupt bits, - * look up the rest in the map. IN0 is bit number 8 - */ - return irqmap_personal_server[(line & 0x1f) - 8]; - } else if (line == 0) { - /* no interrupt */ - return 0; - } else - return irqmap_personal_server[(line - 1) & 3]; -} - -static struct hw_pci personal_server_pci __initdata = { - .map_irq = personal_server_map_irq, - .nr_controllers = 1, - .ops = &dc21285_ops, - .setup = dc21285_setup, - .preinit = dc21285_preinit, - .postinit = dc21285_postinit, -}; - -static int __init personal_pci_init(void) -{ - if (machine_is_personal_server()) - pci_common_init(&personal_server_pci); - return 0; -} - -subsys_initcall(personal_pci_init); diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c deleted file mode 100644 index ca715754fc007..0000000000000 --- a/arch/arm/mach-footbridge/personal.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-footbridge/personal.c - * - * Personal server (Skiff) machine fixup - */ -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <asm/hardware/dec21285.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -#include "common.h" - -MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") - /* Maintainer: Jamey Hicks / George France */ - .atag_offset = 0x100, - .map_io = footbridge_map_io, - .init_irq = footbridge_init_irq, - .init_time = footbridge_timer_init, - .restart = footbridge_restart, -MACHINE_END - -- 2.25.1

1 0

[PATCH kernel-4.19] ARM: footbridge: remove personal server platform
by Yang Yingliang 21 Jul '21

21 Jul '21

From: Russell King <rmk+kernel(a)armlinux.org.uk> mainline inclusion from mainline-v5.13-rc1 commit 298a58e165e447ccfaae35fe9f651f9d7e15166f category: bugfix bugzilla: NA CVE: CVE-2021-32078 -------------------------------- Remove the personal server platform, as that has had an array overrun issue identified. It is believed that no one is using this code. Signed-off-by: Russell King <rmk+kernel(a)armlinux.org.uk> Conflicts: arch/arm/mach-footbridge/Kconfig arch/arm/mach-footbridge/personal-pci.c Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm/configs/footbridge_defconfig | 1 - arch/arm/mach-footbridge/Kconfig | 21 --------- arch/arm/mach-footbridge/Makefile | 2 - arch/arm/mach-footbridge/personal-pci.c | 57 ------------------------- arch/arm/mach-footbridge/personal.c | 25 ----------- 5 files changed, 106 deletions(-) delete mode 100644 arch/arm/mach-footbridge/personal-pci.c delete mode 100644 arch/arm/mach-footbridge/personal.c diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 3a7938f244e56..2aa3ebeb89d7f 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -7,7 +7,6 @@ CONFIG_EXPERT=y CONFIG_MODULES=y CONFIG_ARCH_FOOTBRIDGE=y CONFIG_ARCH_CATS=y -CONFIG_ARCH_PERSONAL_SERVER=y CONFIG_ARCH_EBSA285_HOST=y CONFIG_ARCH_NETWINDER=y CONFIG_LEDS=y diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index cbbdd84cf49ad..84c400f96aa21 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -15,27 +15,6 @@ config ARCH_CATS Saying N will reduce the size of the Footbridge kernel. -config ARCH_PERSONAL_SERVER - bool "Compaq Personal Server" - select FOOTBRIDGE_HOST - select ISA - select ISA_DMA - select PCI - ---help--- - Say Y here if you intend to run this kernel on the Compaq - Personal Server. - - Saying N will reduce the size of the Footbridge kernel. - - The Compaq Personal Server is not available for purchase. - There are no product plans beyond the current research - prototypes at this time. Information is available at: - - <http://www.crl.hpl.hp.com/projects/personalserver/> - - If you have any questions or comments about the Compaq Personal - Server, send e-mail to <skiff(a)crl.dec.com>. - config ARCH_EBSA285_ADDIN bool "EBSA285 (addin mode)" select ARCH_EBSA285 diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index a09f1041f1413..6262993c05558 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -11,12 +11,10 @@ pci-y += dc21285.o pci-$(CONFIG_ARCH_CATS) += cats-pci.o pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o -pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o -obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c deleted file mode 100644 index 9d19aa98a663e..0000000000000 --- a/arch/arm/mach-footbridge/personal-pci.c +++ /dev/null @@ -1,57 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-footbridge/personal-pci.c - * - * PCI bios-type initialisation for PCI machines - * - * Bits taken from various places. - */ -#include <linux/kernel.h> -#include <linux/pci.h> -#include <linux/init.h> - -#include <asm/irq.h> -#include <asm/mach/pci.h> -#include <asm/mach-types.h> - -static int irqmap_personal_server[] = { - IRQ_IN0, IRQ_IN1, IRQ_IN2, IRQ_IN3, 0, 0, 0, - IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI -}; - -static int personal_server_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - unsigned char line; - - pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line); - - if (line > 0x40 && line <= 0x5f) { - /* line corresponds to the bit controlling this interrupt - * in the footbridge. Ignore the first 8 interrupt bits, - * look up the rest in the map. IN0 is bit number 8 - */ - return irqmap_personal_server[(line & 0x1f) - 8]; - } else if (line == 0) { - /* no interrupt */ - return 0; - } else - return irqmap_personal_server[(line - 1) & 3]; -} - -static struct hw_pci personal_server_pci __initdata = { - .map_irq = personal_server_map_irq, - .nr_controllers = 1, - .ops = &dc21285_ops, - .setup = dc21285_setup, - .preinit = dc21285_preinit, - .postinit = dc21285_postinit, -}; - -static int __init personal_pci_init(void) -{ - if (machine_is_personal_server()) - pci_common_init(&personal_server_pci); - return 0; -} - -subsys_initcall(personal_pci_init); diff --git a/arch/arm/mach-footbridge/personal.c b/arch/arm/mach-footbridge/personal.c deleted file mode 100644 index ca715754fc007..0000000000000 --- a/arch/arm/mach-footbridge/personal.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * linux/arch/arm/mach-footbridge/personal.c - * - * Personal server (Skiff) machine fixup - */ -#include <linux/init.h> -#include <linux/spinlock.h> - -#include <asm/hardware/dec21285.h> -#include <asm/mach-types.h> - -#include <asm/mach/arch.h> - -#include "common.h" - -MACHINE_START(PERSONAL_SERVER, "Compaq-PersonalServer") - /* Maintainer: Jamey Hicks / George France */ - .atag_offset = 0x100, - .map_io = footbridge_map_io, - .init_irq = footbridge_init_irq, - .init_time = footbridge_timer_init, - .restart = footbridge_restart, -MACHINE_END - -- 2.25.1

1 0

[PATCH kernel-4.19] mm: slab: fix kmem_cache_create failed when sysfs node not destroyed
by Yang Yingliang 21 Jul '21

21 Jul '21

From: Nanyong Sun <sunnanyong(a)huawei.com> hulk inclusion category: bugfix bugzilla: 174641 CVE: NA ------------------------------------ The commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy") introduced a problem: If one thread destroy a kmem_cache A and another thread concurrently create a kmem_cache B, which is mergeable with A and has same size with A, the B may fail to create due to the duplicate sysfs node. The scenario in detail: 1) Thread 1 uses kmem_cache_destroy() to destroy kmem_cache A which is mergeable, it decreases A's refcount and if refcount is 0, then call memcg_set_kmem_cache_dying() which set A->memcg_params.dying = true, then unlock the slab_mutex and call flush_memcg_workqueue(), it may cost a while. Note: now the sysfs node(like '/kernel/slab/:0000248') of A is still present, it will be deleted in shutdown_cache() which will be called after flush_memcg_workqueue() is done and lock the slab_mutex again. 2) Now if thread 2 is coming, it use kmem_cache_create() to create B, which is mergeable with A(their size is same), it gain the lock of slab_mutex, then call __kmem_cache_alias() trying to find a mergeable node, because of the below added code in commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy"), B is not mergeable with A whose memcg_params.dying is true. int slab_unmergeable(struct kmem_cache *s) if (s->refcount < 0) return 1; /* * Skip the dying kmem_cache. */ if (s->memcg_params.dying) return 1; return 0; } So B has to create its own sysfs node by calling: create_cache-> __kmem_cache_create-> sysfs_slab_add-> kobject_init_and_add Because B is mergeable itself, its filename of sysfs node is based on its size, like '/kernel/slab/:0000248', which is duplicate with A, and the sysfs node of A is still present now, so kobject_init_and_add() will return fail and result in kmem_cache_create() fail. Concurrently modprobe and rmmod the two modules below can reproduce the issue quickly: nf_conntrack_expect, se_sess_cache. See call trace in the end. LTS versions of v4.19.y and v5.4.y have this problem, whereas linux versions after v5.9 do not have this problem because the patchset: ("The new cgroup slab memory controller") almost refactored memcg slab. A potential solution(this patch belongs): Just let the dying kmem_cache be mergeable, the slab_mutex lock can prevent the race between alias kmem_cache creating thread and root kmem_cache destroying thread. In the destroying thread, after flush_memcg_workqueue() is done, judge the refcount again, if someone reference it again during un-lock time, we don't need to destroy the kmem_cache completely, we can reuse it. Another potential solution: revert the commit d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy"), compare to the fail of kmem_cache_create, the memory leak in special scenario seems less harmful. Call trace: sysfs: cannot create duplicate filename '/kernel/slab/:0000248' Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xb0/0x100 sysfs_warn_dup+0x6c/0x88 sysfs_create_dir_ns+0x104/0x120 kobject_add_internal+0xd0/0x378 kobject_init_and_add+0x90/0xd8 sysfs_slab_add+0x16c/0x2d0 __kmem_cache_create+0x16c/0x1d8 create_cache+0xbc/0x1f8 kmem_cache_create_usercopy+0x1a0/0x230 kmem_cache_create+0x50/0x68 init_se_kmem_caches+0x38/0x258 [target_core_mod] target_core_init_configfs+0x8c/0x390 [target_core_mod] do_one_initcall+0x54/0x230 do_init_module+0x64/0x1ec load_module+0x150c/0x16f0 __se_sys_finit_module+0xf0/0x108 __arm64_sys_finit_module+0x24/0x30 el0_svc_common+0x80/0x1c0 el0_svc_handler+0x78/0xe0 el0_svc+0x10/0x260 kobject_add_internal failed for :0000248 with -EEXIST, don't try to register things with the same name in the same directory. kmem_cache_create(se_sess_cache) failed with error -17 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x0/0x198 show_stack+0x24/0x30 dump_stack+0xb0/0x100 kmem_cache_create_usercopy+0xa8/0x230 kmem_cache_create+0x50/0x68 init_se_kmem_caches+0x38/0x258 [target_core_mod] target_core_init_configfs+0x8c/0x390 [target_core_mod] do_one_initcall+0x54/0x230 do_init_module+0x64/0x1ec load_module+0x150c/0x16f0 __se_sys_finit_module+0xf0/0x108 __arm64_sys_finit_module+0x24/0x30 el0_svc_common+0x80/0x1c0 el0_svc_handler+0x78/0xe0 el0_svc+0x10/0x260 Fixes: d38a2b7a9c93 ("mm: memcg/slab: fix memory leak at non-root kmem_cache destroy") Signed-off-by: Nanyong Sun <sunnanyong(a)huawei.com> Cc: stable(a)vger.kernel.org Reviewed-by: tong tiangen <tongtiangen(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- mm/slab_common.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/mm/slab_common.c b/mm/slab_common.c index d208b47e01a8e..acc743315bb5c 100644 --- a/mm/slab_common.c +++ b/mm/slab_common.c @@ -326,14 +326,6 @@ int slab_unmergeable(struct kmem_cache *s) if (s->refcount < 0) return 1; -#ifdef CONFIG_MEMCG_KMEM - /* - * Skip the dying kmem_cache. - */ - if (s->memcg_params.dying) - return 1; -#endif - return 0; } @@ -947,6 +939,16 @@ void kmem_cache_destroy(struct kmem_cache *s) get_online_mems(); mutex_lock(&slab_mutex); + + /* + *Another thread referenced it again + */ + if (READ_ONCE(s->refcount)) { + spin_lock_irq(&memcg_kmem_wq_lock); + s->memcg_params.dying = false; + spin_unlock_irq(&memcg_kmem_wq_lock); + goto out_unlock; + } #endif err = shutdown_memcg_caches(s); -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS] ARM: ensure the signal page contains defined contents
by Yang Yingliang 21 Jul '21

21 Jul '21

From: Russell King <rmk+kernel(a)armlinux.org.uk> stable inclusion from linux-4.19.177 commit 80ef523d2cb719c3de66787e922a96b5099d2fbb CVE: CVE-2021-21781 -------------------------------- [ Upstream commit 9c698bff66ab4914bb3d71da7dc6112519bde23e ] Ensure that the signal page contains our poison instruction to increase the protection against ROP attacks and also contains well defined contents. Acked-by: Will Deacon <will(a)kernel.org> Signed-off-by: Russell King <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Xiu Jianfeng <xiujianfeng(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- arch/arm/kernel/signal.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index 76bb8de6bf6b6..dfe24883cc93a 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -697,18 +697,20 @@ struct page *get_signal_page(void) addr = page_address(page); + /* Poison the entire page */ + memset32(addr, __opcode_to_mem_arm(0xe7fddef1), + PAGE_SIZE / sizeof(u32)); + /* Give the signal return code some randomness */ offset = 0x200 + (get_random_int() & 0x7fc); signal_return_offset = offset; - /* - * Copy signal return handlers into the vector page, and - * set sigreturn to be a pointer to these. - */ + /* Copy signal return handlers into the page */ memcpy(addr + offset, sigreturn_codes, sizeof(sigreturn_codes)); - ptr = (unsigned long)addr + offset; - flush_icache_range(ptr, ptr + sizeof(sigreturn_codes)); + /* Flush out all instructions in this page */ + ptr = (unsigned long)addr; + flush_icache_range(ptr, ptr + PAGE_SIZE); return page; } -- 2.25.1

1 0

[PATCH kernel-4.19 01/11] nvme-pci: Fix controller freeze wait disabling
by Yang Yingliang 21 Jul '21

21 Jul '21

From: Keith Busch <keith.busch(a)intel.com> mainline inclusion from mainline-5.2-rc2 commit e43269e6e5c49d7fec599e6bba71963935b0e4ba category: bugfix bugzilla: 167363 CVE: NA --------------------------- If a controller disabling didn't start a freeze, don't wait for the operation to complete. Reviewed-by: Ming Lei <ming.lei(a)redhat.com> Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Keith Busch <keith.busch(a)intel.com> Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/nvme/host/pci.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c index d295594da64d7..78ce02e476aad 100644 --- a/drivers/nvme/host/pci.c +++ b/drivers/nvme/host/pci.c @@ -2185,7 +2185,7 @@ static void nvme_pci_disable(struct nvme_dev *dev) static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) { - bool dead = true; + bool dead = true, freeze = false; struct pci_dev *pdev = to_pci_dev(dev->dev); mutex_lock(&dev->shutdown_lock); @@ -2193,8 +2193,10 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) u32 csts = readl(dev->bar + NVME_REG_CSTS); if (dev->ctrl.state == NVME_CTRL_LIVE || - dev->ctrl.state == NVME_CTRL_RESETTING) + dev->ctrl.state == NVME_CTRL_RESETTING) { + freeze = true; nvme_start_freeze(&dev->ctrl); + } dead = !!((csts & NVME_CSTS_CFS) || !(csts & NVME_CSTS_RDY) || pdev->error_state != pci_channel_io_normal); } @@ -2203,10 +2205,8 @@ static void nvme_dev_disable(struct nvme_dev *dev, bool shutdown) * Give the controller a chance to complete all entered requests if * doing a safe shutdown. */ - if (!dead) { - if (shutdown) - nvme_wait_freeze_timeout(&dev->ctrl, NVME_IO_TIMEOUT); - } + if (!dead && shutdown && freeze) + nvme_wait_freeze_timeout(&dev->ctrl, NVME_IO_TIMEOUT); nvme_stop_queues(&dev->ctrl); -- 2.25.1

1 10

[PATCH kernel-4.19] block: error out if blk_get_queue() failed in blk_init_rl()
by Yang Yingliang 20 Jul '21

20 Jul '21

From: Yu Kuai <yukuai3(a)huawei.com> hulk inclusion category: bugfix bugzilla: 174635 CVE: NA ----------------------------------------------- If blkg creation concurrent with device removal, queue ref might be unbalanced: t1 t2 t3 cgroup_file_write blkg_conf_prep q = disk->queue dm_ctl_ioctl dev_remove blk_cleanup_queue queue_flag_set(QUEUE_FLAG_DYING, q) blkg_alloc blk_init_cl blk_get_queue -> failed blk_exit_queue blkcg_exit_queue blkg_destroy_all blkg_destroy call_rcu(&blkg->rcu_head, __blkg_release_rcu); __blkg_release_rcu blkg_free blk_exit_rl blk_put_queue -> extra put Thus error out if blk_get_queue() failed in blk_init_rl(), since there is no need to create blkg while queue is dying. Signed-off-by: Yu Kuai <yukuai3(a)huawei.com> Reviewed-by: Hou Tao <houtao1(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/blk-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index 93970be37c17c..4b63336465306 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -888,8 +888,11 @@ int blk_init_rl(struct request_list *rl, struct request_queue *q, if (!rl->rq_pool) return -ENOMEM; - if (rl != &q->root_rl) - WARN_ON_ONCE(!blk_get_queue(q)); + if (rl != &q->root_rl && !blk_get_queue(q)) { + mempool_destroy(rl->rq_pool); + rl->rq_pool = NULL; + return -ENODEV; + } return 0; } -- 2.25.1

1 0

[PATCH openEuler-1.0-LTS 1/2] Revert "vt: Fix character height handling with VT_RESIZEX"
by Yang Yingliang 20 Jul '21

20 Jul '21

hulk inclusion category: bugfix bugzilla: NA CVE: NA -------------------------------- This reverts commit cb173fc207d51b6781dc059c84b3f3a4fa309b56 to avoid kabi broken. Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> Reviewed-by: Jian Cheng <cj.chengjian(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- drivers/tty/vt/vt_ioctl.c | 6 ++--- drivers/video/console/vgacon.c | 44 +++++++++++++++++----------------- include/linux/console_struct.h | 1 - 3 files changed, 25 insertions(+), 26 deletions(-) diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index ce6c7dd7bc126..2e959563af534 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -895,17 +895,17 @@ int vt_ioctl(struct tty_struct *tty, if (vcp) { int ret; int save_scan_lines = vcp->vc_scan_lines; - int save_cell_height = vcp->vc_cell_height; + int save_font_height = vcp->vc_font.height; if (v.v_vlin) vcp->vc_scan_lines = v.v_vlin; if (v.v_clin) - vcp->vc_cell_height = v.v_clin; + vcp->vc_font.height = v.v_clin; vcp->vc_resize_user = 1; ret = vc_resize(vcp, v.v_cols, v.v_rows); if (ret) { vcp->vc_scan_lines = save_scan_lines; - vcp->vc_cell_height = save_cell_height; + vcp->vc_font.height = save_font_height; console_unlock(); return ret; } diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c index a992d922b3a71..4509d0547087a 100644 --- a/drivers/video/console/vgacon.c +++ b/drivers/video/console/vgacon.c @@ -384,7 +384,7 @@ static void vgacon_init(struct vc_data *c, int init) vc_resize(c, vga_video_num_columns, vga_video_num_lines); c->vc_scan_lines = vga_scan_lines; - c->vc_font.height = c->vc_cell_height = vga_video_font_height; + c->vc_font.height = vga_video_font_height; c->vc_complement_mask = 0x7700; if (vga_512_chars) c->vc_hi_font_mask = 0x0800; @@ -517,32 +517,32 @@ static void vgacon_cursor(struct vc_data *c, int mode) switch (c->vc_cursor_type & 0x0f) { case CUR_UNDERLINE: vgacon_set_cursor_size(c->vc_x, - c->vc_cell_height - - (c->vc_cell_height < + c->vc_font.height - + (c->vc_font.height < 10 ? 2 : 3), - c->vc_cell_height - - (c->vc_cell_height < + c->vc_font.height - + (c->vc_font.height < 10 ? 1 : 2)); break; case CUR_TWO_THIRDS: vgacon_set_cursor_size(c->vc_x, - c->vc_cell_height / 3, - c->vc_cell_height - - (c->vc_cell_height < + c->vc_font.height / 3, + c->vc_font.height - + (c->vc_font.height < 10 ? 1 : 2)); break; case CUR_LOWER_THIRD: vgacon_set_cursor_size(c->vc_x, - (c->vc_cell_height * 2) / 3, - c->vc_cell_height - - (c->vc_cell_height < + (c->vc_font.height * 2) / 3, + c->vc_font.height - + (c->vc_font.height < 10 ? 1 : 2)); break; case CUR_LOWER_HALF: vgacon_set_cursor_size(c->vc_x, - c->vc_cell_height / 2, - c->vc_cell_height - - (c->vc_cell_height < + c->vc_font.height / 2, + c->vc_font.height - + (c->vc_font.height < 10 ? 1 : 2)); break; case CUR_NONE: @@ -553,7 +553,7 @@ static void vgacon_cursor(struct vc_data *c, int mode) break; default: vgacon_set_cursor_size(c->vc_x, 1, - c->vc_cell_height); + c->vc_font.height); break; } break; @@ -564,13 +564,13 @@ static int vgacon_doresize(struct vc_data *c, unsigned int width, unsigned int height) { unsigned long flags; - unsigned int scanlines = height * c->vc_cell_height; + unsigned int scanlines = height * c->vc_font.height; u8 scanlines_lo = 0, r7 = 0, vsync_end = 0, mode, max_scan; raw_spin_lock_irqsave(&vga_lock, flags); vgacon_xres = width * VGA_FONTWIDTH; - vgacon_yres = height * c->vc_cell_height; + vgacon_yres = height * c->vc_font.height; if (vga_video_type >= VIDEO_TYPE_VGAC) { outb_p(VGA_CRTC_MAX_SCAN, vga_video_port_reg); max_scan = inb_p(vga_video_port_val); @@ -625,9 +625,9 @@ static int vgacon_doresize(struct vc_data *c, static int vgacon_switch(struct vc_data *c) { int x = c->vc_cols * VGA_FONTWIDTH; - int y = c->vc_rows * c->vc_cell_height; + int y = c->vc_rows * c->vc_font.height; int rows = screen_info.orig_video_lines * vga_default_font_height/ - c->vc_cell_height; + c->vc_font.height; /* * We need to save screen size here as it's the only way * we can spot the screen has been resized and we need to @@ -1058,7 +1058,7 @@ static int vgacon_adjust_height(struct vc_data *vc, unsigned fontheight) cursor_size_lastto = 0; c->vc_sw->con_cursor(c, CM_DRAW); } - c->vc_font.height = c->vc_cell_height = fontheight; + c->vc_font.height = fontheight; vc_resize(c, 0, rows); /* Adjust console size */ } } @@ -1113,12 +1113,12 @@ static int vgacon_resize(struct vc_data *c, unsigned int width, */ screen_info.orig_video_cols = width; screen_info.orig_video_lines = height; - vga_default_font_height = c->vc_cell_height; + vga_default_font_height = c->vc_font.height; return 0; } if (width % 2 || width > screen_info.orig_video_cols || height > (screen_info.orig_video_lines * vga_default_font_height)/ - c->vc_cell_height) + c->vc_font.height) return -EINVAL; if (con_is_visible(c) && !vga_is_gfx) /* who knows */ diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index 8b5bc3a47bf5f..fea64f2692a05 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -62,7 +62,6 @@ struct vc_data { unsigned int vc_rows; unsigned int vc_size_row; /* Bytes per row */ unsigned int vc_scan_lines; /* # of scan lines */ - unsigned int vc_cell_height; /* CRTC character cell height */ unsigned long vc_origin; /* [!] Start of real screen */ unsigned long vc_scr_end; /* [!] End of real screen */ unsigned long vc_visible_origin; /* [!] Top of visible window */ -- 2.25.1

1 1

[PATCH kernel-4.19] block: only call sched requeue_request() for scheduled requests
by Yang Yingliang 20 Jul '21

20 Jul '21

From: Omar Sandoval <osandov(a)fb.com> mainline inclusion from mainline-5.9-rc5 commit e8a8a185051a460e3eb0617dca33f996f4e31516 category: bugfix bugzilla: 172928 CVE: NA --------------------------- Yang Yang reported the following crash caused by requeueing a flush request in Kyber: [ 2.517297] Unable to handle kernel paging request at virtual address ffffffd8071c0b00 ... [ 2.517468] pc : clear_bit+0x18/0x2c [ 2.517502] lr : sbitmap_queue_clear+0x40/0x228 [ 2.517503] sp : ffffff800832bc60 pstate : 00c00145 ... [ 2.517599] Process ksoftirqd/5 (pid: 51, stack limit = 0xffffff8008328000) [ 2.517602] Call trace: [ 2.517606] clear_bit+0x18/0x2c [ 2.517619] kyber_finish_request+0x74/0x80 [ 2.517627] blk_mq_requeue_request+0x3c/0xc0 [ 2.517637] __scsi_queue_insert+0x11c/0x148 [ 2.517640] scsi_softirq_done+0x114/0x130 [ 2.517643] blk_done_softirq+0x7c/0xb0 [ 2.517651] __do_softirq+0x208/0x3bc [ 2.517657] run_ksoftirqd+0x34/0x60 [ 2.517663] smpboot_thread_fn+0x1c4/0x2c0 [ 2.517667] kthread+0x110/0x120 [ 2.517669] ret_from_fork+0x10/0x18 This happens because Kyber doesn't track flush requests, so kyber_finish_request() reads a garbage domain token. Only call the scheduler's requeue_request() hook if RQF_ELVPRIV is set (like we do for the finish_request() hook in blk_mq_free_request()). Now that we're handling it in blk-mq, also remove the check from BFQ. Reported-by: Yang Yang <yang.yang(a)vivo.com> Signed-off-by: Omar Sandoval <osandov(a)fb.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Conflicts: block/blk-mq-sched.h [ Cleanup patch 67cae4c948("blk-mq: cleanup and improve list insertion") is not applied. ] Signed-off-by: Zhihao Cheng <chengzhihao1(a)huawei.com> Reviewed-by: Jason Yan <yanaijie(a)huawei.com> Signed-off-by: Yang Yingliang <yangyingliang(a)huawei.com> --- block/bfq-iosched.c | 12 ------------ block/blk-mq-sched.h | 2 +- 2 files changed, 1 insertion(+), 13 deletions(-) diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c index a214c95f071ad..c15e2c112ea8a 100644 --- a/block/bfq-iosched.c +++ b/block/bfq-iosched.c @@ -4867,18 +4867,6 @@ static void bfq_finish_requeue_request(struct request *rq) struct bfq_queue *bfqq = RQ_BFQQ(rq); struct bfq_data *bfqd; - /* - * Requeue and finish hooks are invoked in blk-mq without - * checking whether the involved request is actually still - * referenced in the scheduler. To handle this fact, the - * following two checks make this function exit in case of - * spurious invocations, for which there is nothing to do. - * - * First, check whether rq has nothing to do with an elevator. - */ - if (unlikely(!(rq->rq_flags & RQF_ELVPRIV))) - return; - /* * rq either is not associated with any icq, or is an already * requeued request that has not (yet) been re-inserted into diff --git a/block/blk-mq-sched.h b/block/blk-mq-sched.h index fe660764b8d13..011445f7852bf 100644 --- a/block/blk-mq-sched.h +++ b/block/blk-mq-sched.h @@ -72,7 +72,7 @@ static inline void blk_mq_sched_requeue_request(struct request *rq) struct request_queue *q = rq->q; struct elevator_queue *e = q->elevator; - if (e && e->type->ops.mq.requeue_request) + if ((rq->rq_flags & RQF_ELVPRIV) && e && e->type->ops.mq.requeue_request) e->type->ops.mq.requeue_request(rq); } -- 2.25.1

1 0

2024

2023

2022

2021

2020

2019

Kernel