- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 0/2] arm64/mpam: Check mpam_detect_is_enabled() before accessing MPAM registers
by Zeng Heng 24 Sep '24

24 Sep '24

Zeng Heng (2): Revert "arm64: head.S: Initialise MPAM EL2 registers and disable traps" arm64/mpam: Check mpam_detect_is_enabled() before accessing MPAM registers arch/arm64/include/asm/cpufeature.h | 9 +++++++ arch/arm64/include/asm/el2_setup.h | 16 ------------ arch/arm64/kernel/cpufeature.c | 39 ++++++++++++++++++++++++++--- arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/mpam.c | 15 ++++++++--- 5 files changed, 56 insertions(+), 24 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6 0/2] arm64/mpam: Check mpam_detect_is_enabled() before accessing MPAM registers
by Zeng Heng 24 Sep '24

24 Sep '24

Zeng Heng (2): Revert "arm64: head.S: Initialise MPAM EL2 registers and disable traps" arm64/mpam: Check mpam_detect_is_enabled() before accessing MPAM registers arch/arm64/include/asm/cpufeature.h | 9 +++++++ arch/arm64/include/asm/el2_setup.h | 16 ------------ arch/arm64/kernel/cpufeature.c | 39 ++++++++++++++++++++++++++--- arch/arm64/kernel/cpuinfo.c | 1 + arch/arm64/kernel/mpam.c | 15 ++++++++--- 5 files changed, 56 insertions(+), 24 deletions(-) -- 2.25.1

2 3

[PATCH OLK-6.6 00/13] arm64/perf: Enable branch stack sampling
by Junhao He 24 Sep '24

24 Sep '24

This series enables perf branch stack sampling support on arm64 platform via a new arch feature called Branch Record Buffer Extension (BRBE). All the relevant register definitions could be accessed here. https://developer.arm.com/documentation/ddi0601/2021-12/AArch64-Registers This series applies on 6.10-rc3. Also this series is being hosted below for quick access, review and test. https://git.gitlab.arm.com/linux-arm/linux-anshuman.git (brbe_v18) - Anshuman ========== Perf Branch Stack Sampling Support (arm64 platforms) =========== Currently arm64 platform does not support perf branch stack sampling. Hence any event requesting for branch stack records i.e PERF_SAMPLE_BRANCH_STACK marked in event->attr.sample_type, will be rejected in armpmu_event_init(). static int armpmu_event_init(struct perf_event *event) { ........ /* does not support taken branch sampling */ if (has_branch_stack(event)) return -EOPNOTSUPP; ........ } $perf record -j any,u,k ls Error: cycles:P: PMU Hardware or event type doesn't support branch stack sampling. -------------------- CONFIG_ARM64_BRBE and FEAT_BRBE ---------------------- After this series, perf branch stack sampling feature gets enabled on arm64 platforms where FEAT_BRBE HW feature is supported, and CONFIG_ARM64_BRBE is also selected during build. Let's observe all all possible scenarios here. 1. Feature not built (!CONFIG_ARM64_BRBE): Falls back to the current behaviour i.e event gets rejected. 2. Feature built but HW not supported (CONFIG_ARM64_BRBE && !FEAT_BRBE): Falls back to the current behaviour i.e event gets rejected. 3. Feature built and HW supported (CONFIG_ARM64_BRBE && FEAT_BRBE): Platform supports branch stack sampling requests. Let's observe through a simple example here. $perf record -j any_call,u,k,save_type ls [Please refer perf-record man pages for all possible branch filter options] $perf report -------------------------- Snip ---------------------- # Overhead Command Source Shared Object Source Symbol Target Symbol Basic Block Cycles # ........ ....... .................... ............................................ ............................................ .................. # 3.52% ls [kernel.kallsyms] [k] sched_clock_noinstr [k] arch_counter_get_cntpct 16 3.52% ls [kernel.kallsyms] [k] sched_clock [k] sched_clock_noinstr 9 1.85% ls [kernel.kallsyms] [k] sched_clock_cpu [k] sched_clock 5 1.80% ls [kernel.kallsyms] [k] irqtime_account_irq [k] sched_clock_cpu 20 1.58% ls [kernel.kallsyms] [k] gic_handle_irq [k] generic_handle_domain_irq 19 1.58% ls [kernel.kallsyms] [k] call_on_irq_stack [k] gic_handle_irq 9 1.58% ls [kernel.kallsyms] [k] do_interrupt_handler [k] call_on_irq_stack 23 1.58% ls [kernel.kallsyms] [k] generic_handle_domain_irq [k] __irq_resolve_mapping 6 1.58% ls [kernel.kallsyms] [k] __irq_resolve_mapping [k] __rcu_read_lock 10 -------------------------- Snip ---------------------- $perf report -D | grep cycles -------------------------- Snip ---------------------- ..... 1: ffff800080dd3334 -> ffff800080dd759c 39 cycles P 0 IND_CALL ..... 2: ffff800080ffaea0 -> ffff800080ffb688 16 cycles P 0 IND_CALL ..... 3: ffff800080139918 -> ffff800080ffae64 9 cycles P 0 CALL ..... 4: ffff800080dd3324 -> ffff8000801398f8 7 cycles P 0 CALL ..... 5: ffff8000800f8548 -> ffff800080dd330c 21 cycles P 0 IND_CALL ..... 6: ffff8000800f864c -> ffff8000800f84ec 6 cycles P 0 CALL ..... 7: ffff8000800f86dc -> ffff8000800f8638 11 cycles P 0 CALL ..... 8: ffff8000800f86d4 -> ffff800081008630 16 cycles P 0 CALL -------------------------- Snip ---------------------- perf script and other tooling can also be applied on the captured perf.data Similarly branch stack sampling records can be collected via direct system call i.e perf_event_open() method after setting 'struct perf_event_attr' as required. event->attr.sample_type |= PERF_SAMPLE_BRANCH_STACK event->attr.branch_sample_type |= PERF_SAMPLE_BRANCH_<FILTER_1> | PERF_SAMPLE_BRANCH_<FILTER_2> | PERF_SAMPLE_BRANCH_<FILTER_3> | ............................... But all branch filters might not be supported on the platform. ----------------------- BRBE Branch Filters Support ----------------------- - Following branch filters are supported on arm64. PERF_SAMPLE_BRANCH_USER /* Branch privilege filters */ PERF_SAMPLE_BRANCH_KERNEL PERF_SAMPLE_BRANCH_HV PERF_SAMPLE_BRANCH_ANY /* Branch type filters */ PERF_SAMPLE_BRANCH_ANY_CALL PERF_SAMPLE_BRANCH_ANY_RETURN PERF_SAMPLE_BRANCH_IND_CALL PERF_SAMPLE_BRANCH_COND PERF_SAMPLE_BRANCH_IND_JUMP PERF_SAMPLE_BRANCH_CALL PERF_SAMPLE_BRANCH_NO_FLAGS /* Branch record flags */ PERF_SAMPLE_BRANCH_NO_CYCLES PERF_SAMPLE_BRANCH_TYPE_SAVE PERF_SAMPLE_BRANCH_HW_INDEX PERF_SAMPLE_BRANCH_PRIV_SAVE - Following branch filters are not supported on arm64. PERF_SAMPLE_BRANCH_ABORT_TX PERF_SAMPLE_BRANCH_IN_TX PERF_SAMPLE_BRANCH_NO_TX PERF_SAMPLE_BRANCH_CALL_STACK Events requesting above non-supported branch filters get rejected. --------------------------- Virtualisation support ------------------------ - No guest support -------------------------------- Testing --------------------------------- - Cross compiled for both arm64 and arm32 platforms - Passes all branch tests with 'perf test branch' on arm64 Changes in V18: - Changed BRBIDR0_EL1 register fields CC and FORMAT, updated the commit message - Replaced BRBIDR0_EL1_FORMAT_0 as BRBIDR0_EL1_FORMAT_FORMAT_0 in BRBE driver - Dropped ifdef CONFIG_ARM64_BRBE around __init_el2_brbe() - Updated in code comment around __init_el2_brbe() - Dropped the write up for EL2->EL1 transition, also moved up the EL3 write up - Unconditionally capture branch record type and privilege information - Scan valid branch stack events in armpmu_start() to create merged filter - Dropped branch_sample_type override in armv8pmu_branch_stack_add() - Dropped branch filter mismatch between PMU and event in read_branch_records() - Added SW filtering framework in read_branch_records() during filter mismatch - Added SW filtering for privilege modes - Used host_data_ptr() to access host_debug_state.brbcr_el1 register - Changed DEBUG_STATE_SAVE_BRBE to use BIT(7) - Reverted back iflags as u8 https://lore.kernel.org/all/20240405024639.1179064-1-anshuman.khandual@arm.… Changes in V17: - Added back Reviewed-by tags from Mark Brown - Updated the commit message regarding the field BRBINFx_EL1_TYPE_IMPDEF_TRAP_EL3 - Added leading 0s for all values as BRBIDR0_EL1.NUMREC is a 8 bit field - Added leading 0s for all values as BRBFCR_EL1.BANK is a 2 bit field - Reordered BRBCR_EL1/BRBCR_EL12/BRBCR_EL2 registers as per sysreg encodings - Renamed s/FIRST/BANK_0 and s/SECOND/BANK_1 in BRBFCR_EL1.BANK - Renamed s/UNCOND_DIRECT/DIRECT_UNCOND in BRBINFx_EL1.TYPE - Renamed s/COND_DIRECT/DIRECT_COND in BRBINFx_EL1.TYPE - Dropped __SYS_BRBINF/__SYS_BRBSRC/__SYS_BRBTGT and their expansions - Moved all existing BRBE registers from sysreg.h header to tools/sysreg format - Updated the commit message including about sys_insn_descs[] - Changed KVM to use existing SYS_BRBSRC/TGT/INF_EL1(n) format - Moved the BRBE instructions into sys_insn_descs[] array - ARM PMUV3 changes have been moved into the BRBE driver patch instead - Moved down branch_stack_add() in armpmu_add() after event's basic checks - Added new callbacks in struct arm_pmu e.g branch_stack_[init|add|del]() - Renamed struct arm_pmu callback branch_reset() as branch_stack_reset() - Dropped the comment in armpmu_event_init() - Renamed 'pmu_hw_events' elements from 'brbe_' to more generic 'branch_' - Separated out from the BRBE driver implementation patch - Dropped the comment in __init_el2_brbe() - Updated __init_el2_brbe() with BRBCR_EL2.MPRED requirements - Updated __init_el2_brbe() with __check_hvhe() constructs - Updated booting.rst regarding MPRED, MDCR_EL3 and fine grained control - Dropped Documentation/arch/arm64/brbe.rst - Renamed armv8pmu_branch_reset() as armv8pmu_branch_stack_reset() - Separated out booting.rst and EL2 boot requirements into a new patch - Dropped process_branch_aborts() completely - Added an warning if transaction states get detected unexpectedly - Dropped enum brbe_bank_idx from the driver - Defined armv8pmu_branch_stack_init/add/del() callbacks in the driver - Changed BRBE driver to use existing SYS_BRBSRC/TGT/INF_EL1(n) format - Dropped isb() call sites in __debug_[save|restore]_brbe() - Changed to [read|write]_sysreg_el1() accessors in __debug_[save|restore]_brbe() Changes in V16 https://lore.kernel.org/all/20240125094119.2542332-1-anshuman.khandual@arm.… - Updated BRBINFx_EL1.TYPE = 0b110000 as field IMPDEF_TRAP_EL3 - Updated BRBCR_ELx[9] as field FZPSS - Updated BRBINFINJ_EL1 to use sysreg field BRBINFx_EL1 - Added BRB_INF_SRC_TGT_EL1 macro for corresponding BRB_[INF|SRC|TGT] expansion - Renamed arm_brbe.h as arm_pmuv3_branch.h - Updated perf_sample_save_brstack()'s new argument requirements with NULL - Fixed typo (s/informations/information) in Documentation/arch/arm64/brbe.rst - Added SPDX-License-Identifier in Documentation/arch/arm64/brbe.rst - Added new PERF_SAMPLE_BRANCH_COUNTERS into BRBE_EXCLUDE_BRANCH_FILTERS - Dropped BRBFCR_EL1 and BRBCR_EL1 from enum vcpu_sysreg - Reverted back the KVM NVHE patch - use host_debug_state based 'brbcr_el1' element and dropped the previous dependency on Jame's coresight series Changes in V15: https://lore.kernel.org/all/20231201053906.1261704-1-anshuman.khandual@arm.… - Added a comment for armv8pmu_branch_probe() regarding single cpu probe - Added a text in brbe.rst regarding single cpu probe - Dropped runtime BRBE enable for setting DEBUG_STATE_SAVE_BRBE - Dropped zero_branch_stack based zero branch records mechanism - Replaced BRBFCR_EL1_DEFAULT_CONFIG with BRBFCR_EL1_CONFIG_MASK - Added BRBFCR_EL1_CONFIG_MASK masking in branch_type_to_brbfcr() - Moved BRBE helpers from arm_brbe.h into arm_brbe.c - Moved armv8_pmu_xxx() declaration inside arm_brbe.h for arm64 (CONFIG_ARM64_BRBE) - Moved armv8_pmu_xxx() stub definitions inside arm_brbe.h for arm32 (!CONFIG_ARM64_BRBE) - Included arm_brbe.h header both in arm_pmuv3.c and arm_brbe.c - Dropped BRBE custom pr_fmt() - Dropped CONFIG_PERF_EVENTS wrapping from header entries - Flush branch records when a cpu bound event follows a task bound event - Dropped BRBFCR_EL1 from __debug_save_brbe()/__debug_restore_brbe() - Always save the live SYS_BRBCR_EL1 in host context and then check if BRBE was enabled before resetting SYS_BRBCR_EL1 for the host Changes in V14: https://lore.kernel.org/all/20231114051329.327572-1-anshuman.khandual@arm.c… - This series has been reorganised as suggested during V13 - There are just eight patches now i.e 5 enablement and 3 perf branch tests - Fixed brackets problem in __SYS_BRBINFO/BRBSRC/BRBTGT() macros - Renamed the macro i.e s/__SYS_BRBINFO/__SYS_BRBINF/ - Renamed s/BRB_IALL/BRB_IALL_INSN and s/BRBE_INJ/BRB_INJ_INSN - Moved BRB_IALL_INSN and SYS_BRB_INSN instructions to sysreg patch - Changed E1BRE as ExBRE in sysreg fields inside BRBCR_ELx - Used BRBCR_ELx for defining all BRBCR_EL1, BRBCR_EL2, and BRBCR_EL12 (new) - Folded the following three patches into a single patch i.e [PATCH 3/8] drivers: perf: arm_pmu: Add new sched_task() callback arm64/perf: Add branch stack support in struct arm_pmu arm64/perf: Add branch stack support in struct pmu_hw_events arm64/perf: Add branch stack support in ARMV8 PMU arm64/perf: Add PERF_ATTACH_TASK_DATA to events with has_branch_stack() - All armv8pmu_branch_xxxx() stub definitions have been moved inside include/linux/perf/arm_pmuv3.h for easy access from both arm32 and arm64 - Added brbe_users, brbe_context and brbe_sample_type in struct pmu_hw_events - Added comments for all the above new elements in struct pmu_hw_events - Added branch_reset() and sched_task() callbacks - Changed and optimized branch records processing during a PMU IRQ - NO branch records get captured for event with mismatched brbe_sample_type - Branch record context is tracked from armpmu_del() & armpmu_add() - Branch record hardware is driven from armv8pmu_start() & armv8pmu_stop() - Dropped NULL check for 'pmu_ctx' inside armv8pmu_sched_task() - Moved down PERF_ATTACH_TASK_DATA assignment with a preceding comment - In conflicting branch sample type requests, first event takes precedence - Folded the following five patches from V13 into a single patch i.e [PATCH 4/8] arm64/perf: Enable branch stack events via FEAT_BRBE arm64/perf: Add struct brbe_regset helper functions arm64/perf: Implement branch records save on task sched out arm64/perf: Implement branch records save on PMU IRQ - Fixed the year in copyright statement - Added Documentation/arch/arm64/brbe.rst - Updated Documentation/arch/arm64/booting.rst (BRBCR_EL2.CC for EL1 entry) - Added __init_el2_brbe() which enables branch record cycle count support - Disabled EL2 traps in __init_el2_fgt() while accessing BRBE registers and executing instructions - Changed CONFIG_ARM64_BRBE user visible description - Fixed a typo in CONFIG_ARM64_BRBE config option description text - Added BUILD_BUG_ON() co-relating BRBE_BANK_MAX_ENTRIES and MAX_BRANCH_RECORDS - Dropped arm64_create_brbe_task_ctx_kmem_cache() - Moved down comment for PERF_SAMPLE_BRANCH_KERNEL in branch_type_to_brbcr() - Renamed BRBCR_ELx_DEFAULT_CONFIG as BRBCR_ELx_CONFIG_MASK - Replaced BRBCR_ELx_DEFAULT_TS with BRBCR_ELx_TS_MASK in BRBCR_ELx_CONFIG_MASK - Replaced BRBCR_ELx_E1BRE instances with BRBCR_ELx_ExBRE - Added BRBE specific branch stack sampling perf test patches into the series - Added a patch to prevent guest accesses into BRBE registers and instructions - Added a patch to save the BRBE host context in NVHE environment - Updated most commit messages Changes in V13: https://lore.kernel.org/all/20230711082455.215983-1-anshuman.khandual@arm.c… https://lore.kernel.org/all/20230622065351.1092893-1-anshuman.khandual@arm.… - Added branch callback stubs for aarch32 pmuv3 based platforms - Updated the comments for capture_brbe_regset() - Deleted the comments in __read_brbe_regset() - Reversed the arguments order in capture_brbe_regset() and brbe_branch_save() - Fixed BRBE_BANK[0|1]_IDX_MAX indices comparison in armv8pmu_branch_read() - Fixed BRBE_BANK[0|1]_IDX_MAX indices comparison in capture_brbe_regset() Changes in V12: https://lore.kernel.org/all/20230615133239.442736-1-anshuman.khandual@arm.c… - Replaced branch types with complete DIRECT/INDIRECT prefixes/suffixes - Replaced branch types with complete INSN/ALIGN prefixes/suffixes - Replaced return branch types as simple RET/ERET - Replaced time field GST_PHYSICAL as GUEST_PHYSICAL - Added 0 padding for BRBIDR0_EL1.NUMREC enum values - Dropped helper arm_pmu_branch_stack_supported() - Renamed armv8pmu_branch_valid() as armv8pmu_branch_attr_valid() - Separated perf_task_ctx_cache setup from arm_pmu private allocation - Collected changes to branch_records_alloc() in a single patch [5/10] - Reworked and cleaned up branch_records_alloc() - Reworked armv8pmu_branch_read() with new loop iterations in patch [6/10] - Reworked capture_brbe_regset() with new loop iterations in patch [8/10] - Updated the comment in branch_type_to_brbcr() - Fixed the comment before stitch_stored_live_entries() - Fixed BRBINFINJ_EL1 definition for VALID_FULL enum field - Factored out helper __read_brbe_regset() from capture_brbe_regset() - Dropped the helper copy_brbe_regset() - Simplified stitch_stored_live_entries() with memcpy(), memmove() - Reworked armv8pmu_probe_pmu() to bail out early with !probe.present - Rework brbe_attributes_probe() without 'struct brbe_hw_attr' - Dropped 'struct brbe_hw_attr' argument from capture_brbe_regset() - Dropped 'struct brbe_hw_attr' argument from brbe_branch_save() - Dropped arm_pmu->private and added arm_pmu->reg_trbidr instead Changes in V11: https://lore.kernel.org/all/20230531040428.501523-1-anshuman.khandual@arm.c… - Fixed the crash for per-cpu events without event->pmu_ctx->task_ctx_data Changes in V10: https://lore.kernel.org/all/20230517022410.722287-1-anshuman.khandual@arm.c… - Rebased the series on v6.4-rc2 - Moved ARMV8 PMUV3 changes inside drivers/perf/arm_pmuv3.c - Moved BRBE driver changes inside drivers/perf/arm_brbe.[c|h] - Moved the WARN_ON() inside the if condition in armv8pmu_handle_irq() Changes in V9: https://lore.kernel.org/all/20230315051444.1683170-1-anshuman.khandual@arm.… - Fixed build problem with has_branch_stack() in arm64 header - BRBINF_EL1 definition has been changed from 'Sysreg' to 'SysregFields' - Renamed all BRBINF_EL1 call sites as BRBINFx_EL1 - Dropped static const char branch_filter_error_msg[] - Implemented a positive list check for BRBE supported perf branch filters - Added a comment in armv8pmu_handle_irq() - Implemented per-cpu allocation for struct branch_record records - Skipped looping through bank 1 if an invalid record is detected in bank 0 - Added comment in armv8pmu_branch_read() explaining prohibited region etc - Added comment warning about erroneously marking transactions as aborted - Replaced the first argument (perf_branch_entry) in capture_brbe_flags() - Dropped the last argument (idx) in capture_brbe_flags() - Dropped the brbcr argument from capture_brbe_flags() - Used perf_sample_save_brstack() to capture branch records for perf_sample_data - Added comment explaining rationale for setting BRBCR_EL1_FZP for user only traces - Dropped BRBE prohibited state mechanism while in armv8pmu_branch_read() - Implemented event task context based branch records save mechanism Changes in V8: https://lore.kernel.org/all/20230123125956.1350336-1-anshuman.khandual@arm.… - Replaced arm_pmu->features as arm_pmu->has_branch_stack, updated its helper - Added a comment and line break before arm_pmu->private element - Added WARN_ON_ONCE() in helpers i.e armv8pmu_branch_[read|valid|enable|disable]() - Dropped comments in armv8pmu_enable_event() and armv8pmu_disable_event() - Replaced open bank encoding in BRBFCR_EL1 with SYS_FIELD_PREP() - Changed brbe_hw_attr->brbe_version from 'bool' to 'int' - Updated pr_warn() as pr_warn_once() with values in brbe_get_perf_[type|priv]() - Replaced all pr_warn_once() as pr_debug_once() in armv8pmu_branch_valid() - Added a comment in branch_type_to_brbcr() for the BRBCR_EL1 privilege settings - Modified the comment related to BRBINFx_EL1.LASTFAILED in capture_brbe_flags() - Modified brbe_get_perf_entry_type() as brbe_set_perf_entry_type() - Renamed brbe_valid() as brbe_record_is_complete() - Renamed brbe_source() as brbe_record_is_source_only() - Renamed brbe_target() as brbe_record_is_target_only() - Inverted checks for !brbe_record_is_[target|source]_only() for info capture - Replaced 'fetch' with 'get' in all helpers that extract field value - Dropped 'static int brbe_current_bank' optimization in select_brbe_bank() - Dropped select_brbe_bank_index() completely, added capture_branch_entry() - Process captured branch entries in two separate loops one for each BRBE bank - Moved branch_records_alloc() inside armv8pmu_probe_pmu() - Added a forward declaration for the helper has_branch_stack() - Added new callbacks armv8pmu_private_alloc() and armv8pmu_private_free() - Updated armv8pmu_probe_pmu() to allocate the private structure before SMP call Changes in V7: https://lore.kernel.org/all/20230105031039.207972-1-anshuman.khandual@arm.c… - Folded [PATCH 7/7] into [PATCH 3/7] which enables branch stack sampling event - Defined BRBFCR_EL1_BRANCH_FILTERS, BRBCR_EL1_DEFAULT_CONFIG in the header - Defined BRBFCR_EL1_DEFAULT_CONFIG in the header - Updated BRBCR_EL1_DEFAULT_CONFIG with BRBCR_EL1_FZP - Defined BRBCR_EL1_DEFAULT_TS in the header - Updated BRBCR_EL1_DEFAULT_CONFIG with BRBCR_EL1_DEFAULT_TS - Moved BRBCR_EL1_DEFAULT_CONFIG check inside branch_type_to_brbcr() - Moved down BRBCR_EL1_CC, BRBCR_EL1_MPRED later in branch_type_to_brbcr() - Also set BRBE in paused state in armv8pmu_branch_disable() - Dropped brbe_paused(), set_brbe_paused() helpers - Extracted error string via branch_filter_error_msg[] for armv8pmu_branch_valid() - Replaced brbe_v1p1 with brbe_version in struct brbe_hw_attr - Added valid_brbe_[cc, format, version]() helpers - Split a separate brbe_attributes_probe() from armv8pmu_branch_probe() - Capture event->attr.branch_sample_type earlier in armv8pmu_branch_valid() - Defined enum brbe_bank_idx with possible values for BRBE bank indices - Changed armpmu->hw_attr into armpmu->private - Added missing space in stub definition for armv8pmu_branch_valid() - Replaced both kmalloc() with kzalloc() - Added BRBE_BANK_MAX_ENTRIES - Updated comment for capture_brbe_flags() - Updated comment for struct brbe_hw_attr - Dropped space after type cast in couple of places - Replaced inverse with negation for testing BRBCR_EL1_FZP in armv8pmu_branch_read() - Captured cpuc->branches->branch_entries[idx] in a local variable - Dropped saved_priv from armv8pmu_branch_read() - Reorganize PERF_SAMPLE_BRANCH_NO_[CYCLES|NO_FLAGS] related configuration - Replaced with FIELD_GET() and FIELD_PREP() wherever applicable - Replaced BRBCR_EL1_TS_PHYSICAL with BRBCR_EL1_TS_VIRTUAL - Moved valid_brbe_nr(), valid_brbe_cc(), valid_brbe_format(), valid_brbe_version() select_brbe_bank(), select_brbe_bank_index() helpers inside the C implementation - Reorganized brbe_valid_nr() and dropped the pr_warn() message - Changed probe sequence in brbe_attributes_probe() - Added 'brbcr' argument into capture_brbe_flags() to ascertain correct state - Disable BRBE before disabling the PMU event counter - Enable PERF_SAMPLE_BRANCH_HV filters when is_kernel_in_hyp_mode() - Guard armv8pmu_reset() & armv8pmu_sched_task() with arm_pmu_branch_stack_supported() Changes in V6: https://lore.kernel.org/linux-arm-kernel/20221208084402.863310-1-anshuman.k… - Restore the exception level privilege after reading the branch records - Unpause the buffer after reading the branch records - Decouple BRBCR_EL1_EXCEPTION/ERTN from perf event privilege level - Reworked BRBE implementation and branch stack sampling support on arm pmu - BRBE implementation is now part of overall ARMV8 PMU implementation - BRBE implementation moved from drivers/perf/ to inside arch/arm64/kernel/ - CONFIG_ARM_BRBE_PMU renamed as CONFIG_ARM64_BRBE in arch/arm64/Kconfig - File moved - drivers/perf/arm_pmu_brbe.c -> arch/arm64/kernel/brbe.c - File moved - drivers/perf/arm_pmu_brbe.h -> arch/arm64/kernel/brbe.h - BRBE name has been dropped from struct arm_pmu and struct hw_pmu_events - BRBE name has been abstracted out as 'branches' in arm_pmu and hw_pmu_events - BRBE name has been abstracted out as 'branches' in ARMV8 PMU implementation - Added sched_task() callback into struct arm_pmu - Added 'hw_attr' into struct arm_pmu encapsulating possible PMU HW attributes - Dropped explicit attributes brbe_(v1p1, nr, cc, format) from struct arm_pmu - Dropped brbfcr, brbcr, registers scratch area from struct hw_pmu_events - Dropped brbe_users, brbe_context tracking in struct hw_pmu_events - Added 'features' tracking into struct arm_pmu with ARM_PMU_BRANCH_STACK flag - armpmu->hw_attr maps into 'struct brbe_hw_attr' inside BRBE implementation - Set ARM_PMU_BRANCH_STACK in 'arm_pmu->features' after successful BRBE probe - Added armv8pmu_branch_reset() inside armv8pmu_branch_enable() - Dropped brbe_supported() as events will be rejected via ARM_PMU_BRANCH_STACK - Dropped set_brbe_disabled() as well - Reformated armv8pmu_branch_valid() warnings while rejecting unsupported events Changes in V5: https://lore.kernel.org/linux-arm-kernel/20221107062514.2851047-1-anshuman.… - Changed BRBCR_EL1.VIRTUAL from 0b1 to 0b01 - Changed BRBFCR_EL1.EnL into BRBFCR_EL1.EnI - Changed config ARM_BRBE_PMU from 'tristate' to 'bool' Changes in V4: https://lore.kernel.org/all/20221017055713.451092-1-anshuman.khandual@arm.c… - Changed ../tools/sysreg declarations as suggested - Set PERF_SAMPLE_BRANCH_STACK in data.sample_flags - Dropped perfmon_capable() check in armpmu_event_init() - s/pr_warn_once/pr_info in armpmu_event_init() - Added brbe_format element into struct pmu_hw_events - Changed v1p1 as brbe_v1p1 in struct pmu_hw_events - Dropped pr_info() from arm64_pmu_brbe_probe(), solved LOCKDEP warning Changes in V3: https://lore.kernel.org/all/20220929075857.158358-1-anshuman.khandual@arm.c… - Moved brbe_stack from the stack and now dynamically allocated - Return PERF_BR_PRIV_UNKNOWN instead of -1 in brbe_fetch_perf_priv() - Moved BRBIDR0, BRBCR, BRBFCR registers and fields into tools/sysreg - Created dummy BRBINF_EL1 field definitions in tools/sysreg - Dropped ARMPMU_EVT_PRIV framework which cached perfmon_capable() - Both exception and exception return branche records are now captured only if the event has PERF_SAMPLE_BRANCH_KERNEL which would already been checked in generic perf via perf_allow_kernel() Changes in V2: https://lore.kernel.org/all/20220908051046.465307-1-anshuman.khandual@arm.c… - Dropped branch sample filter helpers consolidation patch from this series - Added new hw_perf_event.flags element ARMPMU_EVT_PRIV to cache perfmon_capable() - Use cached perfmon_capable() while configuring BRBE branch record filters Changes in V1: https://lore.kernel.org/linux-arm-kernel/20220613100119.684673-1-anshuman.k… - Added CONFIG_PERF_EVENTS wrapper for all branch sample filter helpers - Process new perf branch types via PERF_BR_EXTEND_ABI Changes in RFC V2: https://lore.kernel.org/linux-arm-kernel/20220412115455.293119-1-anshuman.k… - Added branch_sample_priv() while consolidating other branch sample filter helpers - Changed all SYS_BRBXXXN_EL1 register definition encodings per Marc - Changed the BRBE driver as per proposed BRBE related perf ABI changes (V5) - Added documentation for struct arm_pmu changes, updated commit message - Updated commit message for BRBE detection infrastructure patch - PERF_SAMPLE_BRANCH_KERNEL gets checked during arm event init (outside the driver) - Branch privilege state capture mechanism has now moved inside the driver Changes in RFC V1: https://lore.kernel.org/all/1642998653-21377-1-git-send-email-anshuman.khan… Anshuman Khandual (6): arm64/sysreg: Add BRBE registers and fields KVM: arm64: Explicitly handle BRBE traps as UNDEFINED drivers: perf: arm_pmu: Add infrastructure for branch stack sampling arm64/boot: Enable EL2 requirements for BRBE drivers: perf: arm_pmuv3: Enable branch stack sampling via FEAT_BRBE KVM: arm64: nvhe: Disable branch generation in nVHE guests James Clark (3): perf: test: Speed up running brstack test on an Arm model perf: test: Remove empty lines from branch filter test output perf: test: Extend branch stack sampling test for Arm64 BRBE Marc Zyngier (2): KVM: arm64: nv: Drop VCPU_HYP_CONTEXT flag KVM: arm64: Fix TRFCR_EL1/PMSCR_EL1 access in hVHE mode Miguel Luis (2): arm64: Add missing _EL12 encodings arm64: Add missing _EL2 encodings Documentation/arch/arm64/booting.rst | 21 + arch/arm64/include/asm/el2_setup.h | 87 +- arch/arm64/include/asm/kvm_host.h | 5 +- arch/arm64/include/asm/sysreg.h | 55 +- arch/arm64/kvm/debug.c | 5 + arch/arm64/kvm/hyp/nvhe/debug-sr.c | 43 +- arch/arm64/kvm/hyp/vhe/switch.c | 7 +- arch/arm64/kvm/sys_regs.c | 56 ++ arch/arm64/tools/sysreg | 131 +++ drivers/perf/Kconfig | 11 + drivers/perf/Makefile | 1 + drivers/perf/arm_brbe.c | 1198 ++++++++++++++++++++++++ drivers/perf/arm_pmu.c | 42 +- drivers/perf/arm_pmuv3.c | 160 +++- drivers/perf/arm_pmuv3_branch.h | 83 ++ include/linux/perf/arm_pmu.h | 37 +- tools/perf/tests/builtin-test.c | 1 + tools/perf/tests/shell/test_brstack.sh | 57 +- tools/perf/tests/tests.h | 1 + tools/perf/tests/workloads/Build | 2 + tools/perf/tests/workloads/traploop.c | 39 + 21 files changed, 2006 insertions(+), 36 deletions(-) create mode 100644 drivers/perf/arm_brbe.c create mode 100644 drivers/perf/arm_pmuv3_branch.h create mode 100644 tools/perf/tests/workloads/traploop.c -- 2.33.0

2 14

[PATCH openEuler-1.0-LTS 0/1] irqchip/mbigen: Fix mbigen node address layout
by Yuntao Liu 24 Sep '24

24 Sep '24

irqchip/mbigen: Fix mbigen node address layout Yipeng Zou (1): irqchip/mbigen: Fix mbigen node address layout drivers/irqchip/irq-mbigen.c | 20 ++++++++++++++++---- 1 file changed, 16 insertions(+), 4 deletions(-) -- 2.34.1

2 2

[PATCH OLK-6.6] driver: iio: add missing checks on iio_info's callback access
by Cui GaoSheng 24 Sep '24

24 Sep '24

From: Julien Stephan <jstephan(a)baylibre.com> stable inclusion from stable-v6.6.50 commit 72f022ebb9deac28663fa4c04ba315ed5d6654d1 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IARV1X CVE: CVE-2024-46715 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit c4ec8dedca961db056ec85cb7ca8c9f7e2e92252 ] Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]--- Reviewed-by: Nuno Sa <nuno.sa(a)analog.com> Signed-off-by: Julien Stephan <jstephan(a)baylibre.com> Link: https://lore.kernel.org/r/20240530-iio-core-fix-segfault-v3-1-8b7cd2a03773@… Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- drivers/iio/industrialio-core.c | 7 ++++++- drivers/iio/industrialio-event.c | 9 +++++++++ drivers/iio/inkern.c | 32 ++++++++++++++++++++++---------- 3 files changed, 37 insertions(+), 11 deletions(-) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index 5e1a85ca1211..121bde49ccb7 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -752,9 +752,11 @@ static ssize_t iio_read_channel_info(struct device *dev, INDIO_MAX_RAW_ELEMENTS, vals, &val_len, this_attr->address); - else + else if (indio_dev->info->read_raw) ret = indio_dev->info->read_raw(indio_dev, this_attr->c, &vals[0], &vals[1], this_attr->address); + else + return -EINVAL; if (ret < 0) return ret; @@ -836,6 +838,9 @@ static ssize_t iio_read_channel_info_avail(struct device *dev, int length; int type; + if (!indio_dev->info->read_avail) + return -EINVAL; + ret = indio_dev->info->read_avail(indio_dev, this_attr->c, &vals, &type, &length, this_attr->address); diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 19f7a91157ee..f67e4afa5f94 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -285,6 +285,9 @@ static ssize_t iio_ev_state_store(struct device *dev, if (ret < 0) return ret; + if (!indio_dev->info->write_event_config) + return -EINVAL; + ret = indio_dev->info->write_event_config(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr), val); @@ -300,6 +303,9 @@ static ssize_t iio_ev_state_show(struct device *dev, struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); int val; + if (!indio_dev->info->read_event_config) + return -EINVAL; + val = indio_dev->info->read_event_config(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr)); @@ -318,6 +324,9 @@ static ssize_t iio_ev_value_show(struct device *dev, int val, val2, val_arr[2]; int ret; + if (!indio_dev->info->read_event_value) + return -EINVAL; + ret = indio_dev->info->read_event_value(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr), iio_ev_attr_info(this_attr), diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index 7a1f6713318a..b85556538475 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -562,6 +562,7 @@ EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, enum iio_chan_info_enum info) { + const struct iio_info *iio_info = chan->indio_dev->info; int unused; int vals[INDIO_MAX_RAW_ELEMENTS]; int ret; @@ -573,15 +574,18 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, if (!iio_channel_has_info(chan->channel, info)) return -EINVAL; - if (chan->indio_dev->info->read_raw_multi) { - ret = chan->indio_dev->info->read_raw_multi(chan->indio_dev, - chan->channel, INDIO_MAX_RAW_ELEMENTS, - vals, &val_len, info); + if (iio_info->read_raw_multi) { + ret = iio_info->read_raw_multi(chan->indio_dev, + chan->channel, + INDIO_MAX_RAW_ELEMENTS, + vals, &val_len, info); *val = vals[0]; *val2 = vals[1]; + } else if (iio_info->read_raw) { + ret = iio_info->read_raw(chan->indio_dev, + chan->channel, val, val2, info); } else { - ret = chan->indio_dev->info->read_raw(chan->indio_dev, - chan->channel, val, val2, info); + return -EINVAL; } return ret; @@ -801,11 +805,15 @@ static int iio_channel_read_avail(struct iio_channel *chan, const int **vals, int *type, int *length, enum iio_chan_info_enum info) { + const struct iio_info *iio_info = chan->indio_dev->info; + if (!iio_channel_has_available(chan->channel, info)) return -EINVAL; - return chan->indio_dev->info->read_avail(chan->indio_dev, chan->channel, - vals, type, length, info); + if (iio_info->read_avail) + return iio_info->read_avail(chan->indio_dev, chan->channel, + vals, type, length, info); + return -EINVAL; } int iio_read_avail_channel_attribute(struct iio_channel *chan, @@ -995,8 +1003,12 @@ EXPORT_SYMBOL_GPL(iio_get_channel_type); static int iio_channel_write(struct iio_channel *chan, int val, int val2, enum iio_chan_info_enum info) { - return chan->indio_dev->info->write_raw(chan->indio_dev, - chan->channel, val, val2, info); + const struct iio_info *iio_info = chan->indio_dev->info; + + if (iio_info->write_raw) + return iio_info->write_raw(chan->indio_dev, + chan->channel, val, val2, info); + return -EINVAL; } int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2, -- 2.34.1

2 1

[PATCH OLK-5.10] driver: iio: add missing checks on iio_info's callback access
by Cui GaoSheng 24 Sep '24

24 Sep '24

From: Julien Stephan <jstephan(a)baylibre.com> stable inclusion from stable-v6.1.109 commit 0cc7e0ee31e5c44904e98e2229d591e093282a70 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IARV1X CVE: CVE-2024-46715 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit c4ec8dedca961db056ec85cb7ca8c9f7e2e92252 ] Some callbacks from iio_info structure are accessed without any check, so if a driver doesn't implement them trying to access the corresponding sysfs entries produce a kernel oops such as: [ 2203.527791] Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute [...] [ 2203.783416] Call trace: [ 2203.783429] iio_read_channel_info_avail from dev_attr_show+0x18/0x48 [ 2203.789807] dev_attr_show from sysfs_kf_seq_show+0x90/0x120 [ 2203.794181] sysfs_kf_seq_show from seq_read_iter+0xd0/0x4e4 [ 2203.798555] seq_read_iter from vfs_read+0x238/0x2a0 [ 2203.802236] vfs_read from ksys_read+0xa4/0xd4 [ 2203.805385] ksys_read from ret_fast_syscall+0x0/0x54 [ 2203.809135] Exception stack(0xe0badfa8 to 0xe0badff0) [ 2203.812880] dfa0: 00000003 b6f10f80 00000003 b6eab000 00020000 00000000 [ 2203.819746] dfc0: 00000003 b6f10f80 7ff00000 00000003 00000003 00000000 00020000 00000000 [ 2203.826619] dfe0: b6e1bc88 bed80958 b6e1bc94 b6e1bcb0 [ 2203.830363] Code: bad PC value [ 2203.832695] ---[ end trace 0000000000000000 ]--- Reviewed-by: Nuno Sa <nuno.sa(a)analog.com> Signed-off-by: Julien Stephan <jstephan(a)baylibre.com> Link: https://lore.kernel.org/r/20240530-iio-core-fix-segfault-v3-1-8b7cd2a03773@… Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/iio/inkern.c [ Context conflicts with commit 110f11589c8777. ] Signed-off-by: Cui GaoSheng <cuigaosheng1(a)huawei.com> --- drivers/iio/industrialio-core.c | 7 ++++++- drivers/iio/industrialio-event.c | 9 ++++++++ drivers/iio/inkern.c | 35 ++++++++++++++++++++++---------- 3 files changed, 39 insertions(+), 12 deletions(-) diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index ea98aad9fb81..b57461731718 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -684,9 +684,11 @@ static ssize_t iio_read_channel_info(struct device *dev, INDIO_MAX_RAW_ELEMENTS, vals, &val_len, this_attr->address); - else + else if (indio_dev->info->read_raw) ret = indio_dev->info->read_raw(indio_dev, this_attr->c, &vals[0], &vals[1], this_attr->address); + else + return -EINVAL; if (ret < 0) return ret; @@ -791,6 +793,9 @@ static ssize_t iio_read_channel_info_avail(struct device *dev, int length; int type; + if (!indio_dev->info->read_avail) + return -EINVAL; + ret = indio_dev->info->read_avail(indio_dev, this_attr->c, &vals, &type, &length, this_attr->address); diff --git a/drivers/iio/industrialio-event.c b/drivers/iio/industrialio-event.c index 99ba657b8568..8720b86d8834 100644 --- a/drivers/iio/industrialio-event.c +++ b/drivers/iio/industrialio-event.c @@ -274,6 +274,9 @@ static ssize_t iio_ev_state_store(struct device *dev, if (ret < 0) return ret; + if (!indio_dev->info->write_event_config) + return -EINVAL; + ret = indio_dev->info->write_event_config(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr), val); @@ -289,6 +292,9 @@ static ssize_t iio_ev_state_show(struct device *dev, struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); int val; + if (!indio_dev->info->read_event_config) + return -EINVAL; + val = indio_dev->info->read_event_config(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr)); @@ -307,6 +313,9 @@ static ssize_t iio_ev_value_show(struct device *dev, int val, val2, val_arr[2]; int ret; + if (!indio_dev->info->read_event_value) + return -EINVAL; + ret = indio_dev->info->read_event_value(indio_dev, this_attr->c, iio_ev_attr_type(this_attr), iio_ev_attr_dir(this_attr), iio_ev_attr_info(this_attr), diff --git a/drivers/iio/inkern.c b/drivers/iio/inkern.c index c32b2577dd99..746e05dd899d 100644 --- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -500,6 +500,7 @@ EXPORT_SYMBOL_GPL(devm_iio_channel_get_all); static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, enum iio_chan_info_enum info) { + const struct iio_info *iio_info = chan->indio_dev->info; int unused; int vals[INDIO_MAX_RAW_ELEMENTS]; int ret; @@ -511,15 +512,19 @@ static int iio_channel_read(struct iio_channel *chan, int *val, int *val2, if (!iio_channel_has_info(chan->channel, info)) return -EINVAL; - if (chan->indio_dev->info->read_raw_multi) { - ret = chan->indio_dev->info->read_raw_multi(chan->indio_dev, - chan->channel, INDIO_MAX_RAW_ELEMENTS, - vals, &val_len, info); + if (iio_info->read_raw_multi) { + ret = iio_info->read_raw_multi(chan->indio_dev, + chan->channel, + INDIO_MAX_RAW_ELEMENTS, + vals, &val_len, info); *val = vals[0]; *val2 = vals[1]; - } else - ret = chan->indio_dev->info->read_raw(chan->indio_dev, - chan->channel, val, val2, info); + } else if (iio_info->read_raw) { + ret = iio_info->read_raw(chan->indio_dev, + chan->channel, val, val2, info); + } else { + return -EINVAL; + } return ret; } @@ -720,11 +725,15 @@ static int iio_channel_read_avail(struct iio_channel *chan, const int **vals, int *type, int *length, enum iio_chan_info_enum info) { + const struct iio_info *iio_info = chan->indio_dev->info; + if (!iio_channel_has_available(chan->channel, info)) return -EINVAL; - return chan->indio_dev->info->read_avail(chan->indio_dev, chan->channel, - vals, type, length, info); + if (iio_info->read_avail) + return iio_info->read_avail(chan->indio_dev, chan->channel, + vals, type, length, info); + return -EINVAL; } int iio_read_avail_channel_attribute(struct iio_channel *chan, @@ -852,8 +861,12 @@ EXPORT_SYMBOL_GPL(iio_get_channel_type); static int iio_channel_write(struct iio_channel *chan, int val, int val2, enum iio_chan_info_enum info) { - return chan->indio_dev->info->write_raw(chan->indio_dev, - chan->channel, val, val2, info); + const struct iio_info *iio_info = chan->indio_dev->info; + + if (iio_info->write_raw) + return iio_info->write_raw(chan->indio_dev, + chan->channel, val, val2, info); + return -EINVAL; } int iio_write_channel_attribute(struct iio_channel *chan, int val, int val2, -- 2.34.1

2 1

[PATCH OLK-5.10 0/5] A group of optimization and bug fix for numa-affinity
by Nanyong Sun 24 Sep '24

24 Sep '24

A group of optimization and bug fix for numa-affinity. Nanyong Sun (5): mm: thp: support to control numa migration mm: numa-affinity: add helper numa_affinity_sampling_enabled() mm: numa-affinity: adapt for should_numa_migrate_memory mm: numa-affinity: adapt for task_numa_placement mm: numa-affinity: fix build error when !CONFIG_PROC_SYSCTL Documentation/admin-guide/mm/transhuge.rst | 8 ++++++ arch/arm64/Kconfig | 1 + arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + include/linux/huge_mm.h | 13 +++++++++ include/linux/mem_sampling.h | 13 +++++++++ kernel/sched/fair.c | 30 ++++++++++++++------ mm/Kconfig | 10 +++++++ mm/huge_memory.c | 33 ++++++++++++++++++++++ mm/mem_sampling.c | 4 --- mm/migrate.c | 3 ++ 11 files changed, 105 insertions(+), 12 deletions(-) -- 2.33.0

2 6

[openeuler:OLK-5.10 16261/30000] drivers/video/fbdev/ls2k500sfb.c:244: undefined reference to `fg_console'
by kernel test robot 24 Sep '24

24 Sep '24

tree: https://gitee.com/openeuler/kernel.git OLK-5.10 head: ec708b533135368027cf0b97c4d1abf6950e86db commit: d74f3b70d73220d919db010ec1c81aa1d89082b6 [16261/30000] fbdev: add ls2k500sfb driver for ls2k500 bmc. config: x86_64-randconfig-074-20240924 (https://download.01.org/0day-ci/archive/20240924/202409241851.FLydbyQT-lkp@…) compiler: gcc-12 (Debian 12.2.0-14) 12.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240924/202409241851.FLydbyQT-lkp@…) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp(a)intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202409241851.FLydbyQT-lkp@intel.com/ All errors (new ones prefixed by >>): ld: drivers/video/fbdev/ls2k500sfb.o: in function `ls2k500sfb_events_fn': >> drivers/video/fbdev/ls2k500sfb.c:244: undefined reference to `fg_console' >> ld: drivers/video/fbdev/ls2k500sfb.c:244: undefined reference to `fg_console' >> ld: drivers/video/fbdev/ls2k500sfb.c:244: undefined reference to `fg_console' vim +244 drivers/video/fbdev/ls2k500sfb.c 110 111 static void ls2k500sfb_events_fn(struct work_struct *work) 112 { 113 struct ls2k500sfb_struct *priv = container_of(work, struct ls2k500sfb_struct, work); 114 struct pci_dev *pdev = priv->dev; 115 struct pci_dev *ppdev = pdev->bus->self; 116 uint32_t i, d, timeout, retry = 0; 117 static const uint32_t index[] = { 118 0x10, 0x14, 0x18, 0x1c, 0x20, 0x24, 0x30, 0x3c, 0x54, 0x58, 0x78, 0x7c, 0x80, 4 119 }; 120 121 static uint32_t data[sizeof(index) / 4]; 122 static const uint32_t cindex[] = { 0x10, 0x3c, 4 }; 123 124 static uint32_t cdata[sizeof(cindex) / 4]; 125 static uint32_t d80c, d71c, ctrl; 126 static void *p; 127 128 if (!priv->running) { 129 for (i = 0; i < ARRAY_SIZE(index); i++) 130 pci_read_config_dword(ppdev, index[i], &data[i]); 131 for (i = 0; i < ARRAY_SIZE(cindex); i++) 132 pci_read_config_dword(pdev, cindex[i], &cdata[i]); 133 if (ppdev->vendor == 0x14) { 134 pci_read_config_dword(ppdev, 0x80c, &d80c); 135 d80c = (d80c & ~(3 << 17)) | (1 << 17); 136 137 pci_read_config_dword(ppdev, 0x71c, &d71c); 138 d71c |= 1 << 26; 139 140 p = pci_iomap(ppdev, 0, 0x100); 141 } 142 ctrl = readl(p); 143 return; 144 } 145 local_bh_disable(); 146 pciebreak_smp_send_stop(100); 147 wmb(); /* flush all write before we disable pcie window */ 148 pci_write_config_dword(ppdev, 0x18, 0); 149 pci_write_config_dword(ppdev, 0x1c, 0); 150 pci_write_config_dword(ppdev, 0x20, 0); 151 atomic_set(&waiting_for_pciebreak_ipi, 0); 152 wmb(); /* flush all write after change pcie window */ 153 local_bh_enable(); 154 if (ppdev->vendor == 0x14) { 155 timeout = 10000; 156 while (timeout) { 157 pci_read_config_dword(ppdev, 0x10, &d); 158 d &= ~0xf; 159 if (!d) 160 break; 161 mdelay(1); 162 timeout--; 163 }; 164 if (!timeout) 165 pr_info("bar not clear 0\n"); 166 167 pci_read_config_dword(ppdev, 0x0, &d); 168 pr_info("pcie port deviceid=0x%x recover begin\n", d); 169 retrain: 170 while (1) { 171 pci_write_config_dword(ppdev, index[0], data[0]); 172 pci_read_config_dword(ppdev, index[0], &d); 173 d &= ~0xf; 174 if (d) 175 break; 176 mdelay(1); 177 } 178 179 while (1) { 180 for (i = 0; i < ARRAY_SIZE(index); i++) { 181 if (index[i] != 0x18 && index[i] != 0x1c && index[i] != 0x20) 182 pci_write_config_dword(ppdev, index[i], data[i]); 183 } 184 pci_write_config_dword(ppdev, 0x80c, d80c); 185 pci_write_config_dword(ppdev, 0x71c, d71c); 186 187 pci_read_config_dword(ppdev, 0x10, &d); 188 d &= ~0xf; 189 if (d) 190 break; 191 mdelay(1); 192 } 193 194 timeout = 10000; 195 196 writel(ctrl | 0x8, p); 197 while (1) { 198 d = readl(p + 0xc); 199 if ((d & 0x11) == 0x11) { 200 break; 201 } else if (!timeout) { 202 pr_info("pcie train failed status=0x%x\n", d); 203 goto out; 204 } 205 mdelay(1); 206 timeout--; 207 } 208 209 210 pr_info("pcie recovered done\n"); 211 212 if (!retry) { 213 /*wait u-boot ddr config */ 214 set_current_state(TASK_UNINTERRUPTIBLE); 215 schedule_timeout(HZ*resetbootwait); 216 set_current_state(TASK_RUNNING); 217 pci_read_config_dword(ppdev, 0x10, &d); 218 d &= ~0xf; 219 if (!d) { 220 retry = 1; 221 goto retrain; 222 } 223 } 224 } else { 225 set_current_state(TASK_UNINTERRUPTIBLE); 226 schedule_timeout(HZ*resetbootwait); 227 set_current_state(TASK_RUNNING); 228 } 229 local_bh_disable(); 230 pciebreak_smp_send_stop(10000); 231 wmb(); /* flush all write before we update pcie window */ 232 for (i = 0; i < ARRAY_SIZE(index); i++) 233 pci_write_config_dword(ppdev, index[i], data[i]); 234 235 for (i = 0; i < ARRAY_SIZE(cindex); i++) 236 pci_write_config_dword(pdev, cindex[i], cdata[i]); 237 atomic_set(&waiting_for_pciebreak_ipi, 0); 238 wmb(); /* flush all write after we update pcie window */ 239 local_bh_enable(); 240 241 242 pr_info("redraw console\n"); 243 > 244 saved_console = fg_console; 245 switch_console(fg_console > 0?fg_console - 1 : fg_console + 1); 246 queue_delayed_work(priv->wq, &priv->redraw_work, HZ); 247 out: 248 priv->running = 0; 249 } 250 -- 0-DAY CI Kernel Test Service https://github.com/intel/lkp-tests/wiki

1 0

[PATCH openEuler-22.03-LTS-SP1] ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
by Liu Mingrui 24 Sep '24

24 Sep '24

From: robelin <robelin(a)nvidia.com> stable inclusion from stable-v5.10.226 commit 8ca21e7a27c66b95a4b215edc8e45e5d66679f9f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IARYAA CVE: CVE-2024-46798 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b4a90b543d9f62d3ac34ec1ab97fc5334b048565 upstream. When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it. Fixes: a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables") Signed-off-by: robelin <robelin(a)nvidia.com> Signed-off-by: Sameer Pujar <spujar(a)nvidia.com> Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Mingrui <liumingrui(a)huawei.com> --- sound/soc/soc-dapm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 754c1f16ee83..acb46e1f9c0a 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4014,6 +4014,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMD: kfree(substream->runtime); + substream->runtime = NULL; break; default: -- 2.25.1

2 1

[PATCH OLK-5.10] ASoC: dapm: Fix UAF for snd_soc_pcm_runtime object
by Liu Mingrui 24 Sep '24

24 Sep '24

From: robelin <robelin(a)nvidia.com> stable inclusion from stable-v5.10.226 commit 8ca21e7a27c66b95a4b215edc8e45e5d66679f9f category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IARYAA CVE: CVE-2024-46798 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit b4a90b543d9f62d3ac34ec1ab97fc5334b048565 upstream. When using kernel with the following extra config, - CONFIG_KASAN=y - CONFIG_KASAN_GENERIC=y - CONFIG_KASAN_INLINE=y - CONFIG_KASAN_VMALLOC=y - CONFIG_FRAME_WARN=4096 kernel detects that snd_pcm_suspend_all() access a freed 'snd_soc_pcm_runtime' object when the system is suspended, which leads to a use-after-free bug: [ 52.047746] BUG: KASAN: use-after-free in snd_pcm_suspend_all+0x1a8/0x270 [ 52.047765] Read of size 1 at addr ffff0000b9434d50 by task systemd-sleep/2330 [ 52.047785] Call trace: [ 52.047787] dump_backtrace+0x0/0x3c0 [ 52.047794] show_stack+0x34/0x50 [ 52.047797] dump_stack_lvl+0x68/0x8c [ 52.047802] print_address_description.constprop.0+0x74/0x2c0 [ 52.047809] kasan_report+0x210/0x230 [ 52.047815] __asan_report_load1_noabort+0x3c/0x50 [ 52.047820] snd_pcm_suspend_all+0x1a8/0x270 [ 52.047824] snd_soc_suspend+0x19c/0x4e0 The snd_pcm_sync_stop() has a NULL check on 'substream->runtime' before making any access. So we need to always set 'substream->runtime' to NULL everytime we kfree() it. Fixes: a72706ed8208 ("ASoC: codec2codec: remove ephemeral variables") Signed-off-by: robelin <robelin(a)nvidia.com> Signed-off-by: Sameer Pujar <spujar(a)nvidia.com> Link: https://patch.msgid.link/20240823144342.4123814-2-spujar@nvidia.com Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Liu Mingrui <liumingrui(a)huawei.com> --- sound/soc/soc-dapm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 754c1f16ee83..acb46e1f9c0a 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -4014,6 +4014,7 @@ static int snd_soc_dai_link_event(struct snd_soc_dapm_widget *w, case SND_SOC_DAPM_POST_PMD: kfree(substream->runtime); + substream->runtime = NULL; break; default: -- 2.25.1

2 1

2024

2023

2022

2021

2020

2019

Kernel