- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] ipv4: Fix uninit-value access in __ip_make_skb()
by Dong Chenchen 14 Oct '24

14 Oct '24

From: Shigeru Yoshida <syoshida(a)redhat.com> mainline inclusion from mainline-v6.9-rc7 commit fc1092f51567277509563800a3c56732070b6aa4 category: bugfix bugzilla: 190087 CVE: CVE-2024-36927 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- KMSAN reported uninit-value access in __ip_make_skb() [1]. __ip_make_skb() tests HDRINCL to know if the skb has icmphdr. However, HDRINCL can cause a race condition. If calling setsockopt(2) with IP_HDRINCL changes HDRINCL while __ip_make_skb() is running, the function will access icmphdr in the skb even if it is not included. This causes the issue reported by KMSAN. Check FLOWI_FLAG_KNOWN_NH on fl4->flowi4_flags instead of testing HDRINCL on the socket. Also, fl4->fl4_icmp_type and fl4->fl4_icmp_code are not initialized. These are union in struct flowi4 and are implicitly initialized by flowi4_init_output(), but we should not rely on specific union layout. Initialize these explicitly in raw_sendmsg(). [1] BUG: KMSAN: uninit-value in __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 __ip_make_skb+0x2b74/0x2d20 net/ipv4/ip_output.c:1481 ip_finish_skb include/net/ip.h:243 [inline] ip_push_pending_frames+0x4c/0x5c0 net/ipv4/ip_output.c:1508 raw_sendmsg+0x2381/0x2690 net/ipv4/raw.c:654 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x5f6/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13c/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35a/0x7c0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] __ip_append_data+0x49ab/0x68c0 net/ipv4/ip_output.c:1128 ip_append_data+0x1e7/0x260 net/ipv4/ip_output.c:1365 raw_sendmsg+0x22b1/0x2690 net/ipv4/raw.c:648 inet_sendmsg+0x27b/0x2a0 net/ipv4/af_inet.c:851 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x274/0x3c0 net/socket.c:745 __sys_sendto+0x62c/0x7b0 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x130/0x200 net/socket.c:2199 do_syscall_64+0xd8/0x1f0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 15709 Comm: syz-executor.7 Not tainted 6.8.0-11567-gb3603fcb79b1 #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 Fixes: 99e5acae193e ("ipv4: Fix potential uninit variable access bug in __ip_make_skb()") Reported-by: syzkaller <syzkaller(a)googlegroups.com> Signed-off-by: Shigeru Yoshida <syoshida(a)redhat.com> Link: https://lore.kernel.org/r/20240430123945.2057348-1-syoshida@redhat.com Signed-off-by: Paolo Abeni <pabeni(a)redhat.com> Conflicts: net/ipv4/ip_output.c [commit cafbe182a467 wasnt merged in 5.10, which leads to context conflicts for inet_test_bit() not implemented] Signed-off-by: Dong Chenchen <dongchenchen2(a)huawei.com> --- net/ipv4/ip_output.c | 3 ++- net/ipv4/raw.c | 3 +++ 2 files changed, 5 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 5d20dac19e0b..79ff136ae6f5 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1571,7 +1571,8 @@ struct sk_buff *__ip_make_skb(struct sock *sk, * so icmphdr does not in skb linear region and can not get icmp_type * by icmp_hdr(skb)->type. */ - if (sk->sk_type == SOCK_RAW && !inet_sk(sk)->hdrincl) + if (sk->sk_type == SOCK_RAW && + !(fl4->flowi4_flags & FLOWI_FLAG_KNOWN_NH)) icmp_type = fl4->fl4_icmp_type; else icmp_type = icmp_hdr(skb)->type; diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index 5336731b2401..3909dcccdd3e 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -606,6 +606,9 @@ static int raw_sendmsg(struct sock *sk, struct msghdr *msg, size_t len) (hdrincl ? FLOWI_FLAG_KNOWN_NH : 0), daddr, saddr, 0, 0, sk->sk_uid); + fl4.fl4_icmp_type = 0; + fl4.fl4_icmp_code = 0; + if (!hdrincl) { rfv.msg = msg; rfv.hlen = 0; -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] atm: idt77252: prevent use after free in dequeue_rx()
by Peng Zhang 14 Oct '24

14 Oct '24

From: Dan Carpenter <dan.carpenter(a)linaro.org> stable inclusion from stable-v5.10.225 commit 1cece837e387c039225f19028df255df87a97c0d category: bugfix bugzilla: 189268 CVE: CVE-2024-44998 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit a9a18e8f770c9b0703dab93580d0b02e199a4c79 ] We can't dereference "skb" after calling vcc->push() because the skb is released. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- drivers/atm/idt77252.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index e616e33c8a20..25fd73fafb37 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -1118,8 +1118,8 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) rpp->len += skb->len; if (stat & SAR_RSQE_EPDU) { + unsigned int len, truesize; unsigned char *l1l2; - unsigned int len; l1l2 = (unsigned char *) ((unsigned long) skb->data + skb->len - 6); @@ -1189,14 +1189,15 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) ATM_SKB(skb)->vcc = vcc; __net_timestamp(skb); + truesize = skb->truesize; vcc->push(vcc, skb); atomic_inc(&vcc->stats->rx); - if (skb->truesize > SAR_FB_SIZE_3) + if (truesize > SAR_FB_SIZE_3) add_rx_skb(card, 3, SAR_FB_SIZE_3, 1); - else if (skb->truesize > SAR_FB_SIZE_2) + else if (truesize > SAR_FB_SIZE_2) add_rx_skb(card, 2, SAR_FB_SIZE_2, 1); - else if (skb->truesize > SAR_FB_SIZE_1) + else if (truesize > SAR_FB_SIZE_1) add_rx_skb(card, 1, SAR_FB_SIZE_1, 1); else add_rx_skb(card, 0, SAR_FB_SIZE_0, 1); -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] fou: remove warn in gue_gro_receive on unsupported protocol
by Peng Zhang 14 Oct '24

14 Oct '24

From: Willem de Bruijn <willemb(a)google.com> mainline inclusion from mainline-v6.11-rc1 commit dd89a81d850fa9a65f67b4527c0e420d15bf836c category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAMMLZ CVE: CVE-2024-44940 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks"). Signed-off-by: Willem de Bruijn <willemb(a)google.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gm… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Conflicts: net/ipv4/fou.c net/ipv4/fou_core.c [The file where the code is located is changed due to refactoring] Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- net/ipv4/fou.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index e5f69b0bf3df..3b777457ad5b 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -441,7 +441,7 @@ static struct sk_buff *gue_gro_receive(struct sock *sk, rcu_read_lock(); offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads; ops = rcu_dereference(offloads[proto]); - if (WARN_ON_ONCE(!ops || !ops->callbacks.gro_receive)) + if (!ops || !ops->callbacks.gro_receive) goto out_unlock; pp = call_gro_receive(ops->callbacks.gro_receive, head, skb); -- 2.25.1

2 1

[PATCH OLK-5.10] fou: remove warn in gue_gro_receive on unsupported protocol
by Peng Zhang 14 Oct '24

14 Oct '24

From: Willem de Bruijn <willemb(a)google.com> mainline inclusion from mainline-v6.11-rc1 commit dd89a81d850fa9a65f67b4527c0e420d15bf836c category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAMMLZ CVE: CVE-2024-44940 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- Drop the WARN_ON_ONCE inn gue_gro_receive if the encapsulated type is not known or does not have a GRO handler. Such a packet is easily constructed. Syzbot generates them and sets off this warning. Remove the warning as it is expected and not actionable. The warning was previously reduced from WARN_ON to WARN_ON_ONCE in commit 270136613bf7 ("fou: Do WARN_ON_ONCE in gue_gro_receive for bad proto callbacks"). Signed-off-by: Willem de Bruijn <willemb(a)google.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Link: https://lore.kernel.org/r/20240614122552.1649044-1-willemdebruijn.kernel@gm… Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Conflicts: net/ipv4/fou.c net/ipv4/fou_core.c [The file where the code is located is changed due to refactoring] Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- net/ipv4/fou.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/fou.c b/net/ipv4/fou.c index e5f69b0bf3df..3b777457ad5b 100644 --- a/net/ipv4/fou.c +++ b/net/ipv4/fou.c @@ -441,7 +441,7 @@ static struct sk_buff *gue_gro_receive(struct sock *sk, rcu_read_lock(); offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads; ops = rcu_dereference(offloads[proto]); - if (WARN_ON_ONCE(!ops || !ops->callbacks.gro_receive)) + if (!ops || !ops->callbacks.gro_receive) goto out_unlock; pp = call_gro_receive(ops->callbacks.gro_receive, head, skb); -- 2.25.1

2 1

[PATCH OLK-5.10] atm: idt77252: prevent use after free in dequeue_rx()
by Peng Zhang 14 Oct '24

14 Oct '24

From: Dan Carpenter <dan.carpenter(a)linaro.org> stable inclusion from stable-v5.10.225 commit 1cece837e387c039225f19028df255df87a97c0d category: bugfix bugzilla: 189268 CVE: CVE-2024-44998 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit a9a18e8f770c9b0703dab93580d0b02e199a4c79 ] We can't dereference "skb" after calling vcc->push() because the skb is released. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Dan Carpenter <dan.carpenter(a)linaro.org> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- drivers/atm/idt77252.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c index e616e33c8a20..25fd73fafb37 100644 --- a/drivers/atm/idt77252.c +++ b/drivers/atm/idt77252.c @@ -1118,8 +1118,8 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) rpp->len += skb->len; if (stat & SAR_RSQE_EPDU) { + unsigned int len, truesize; unsigned char *l1l2; - unsigned int len; l1l2 = (unsigned char *) ((unsigned long) skb->data + skb->len - 6); @@ -1189,14 +1189,15 @@ dequeue_rx(struct idt77252_dev *card, struct rsq_entry *rsqe) ATM_SKB(skb)->vcc = vcc; __net_timestamp(skb); + truesize = skb->truesize; vcc->push(vcc, skb); atomic_inc(&vcc->stats->rx); - if (skb->truesize > SAR_FB_SIZE_3) + if (truesize > SAR_FB_SIZE_3) add_rx_skb(card, 3, SAR_FB_SIZE_3, 1); - else if (skb->truesize > SAR_FB_SIZE_2) + else if (truesize > SAR_FB_SIZE_2) add_rx_skb(card, 2, SAR_FB_SIZE_2, 1); - else if (skb->truesize > SAR_FB_SIZE_1) + else if (truesize > SAR_FB_SIZE_1) add_rx_skb(card, 1, SAR_FB_SIZE_1, 1); else add_rx_skb(card, 0, SAR_FB_SIZE_0, 1); -- 2.25.1

2 1

[PATCH OLK-5.10] xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
by Peng Zhang 14 Oct '24

14 Oct '24

From: Mathias Nyman <mathias.nyman(a)linux.intel.com> stable inclusion from stable-v5.10.225 commit 0f0654318e25b2c185e245ba4a591e42fabb5e59 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAOXZE CVE: CVE-2024-45006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit af8e119f52e9c13e556be9e03f27957554a84656 upstream. re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. Reported-by: Karel Balej <balejk(a)matfyz.cz> Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/ Cc: stable(a)vger.kernel.org Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- drivers/usb/host/xhci.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b37ddbb88b74..b4e5b15fbed9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2826,7 +2826,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, xhci->num_active_eps); return -ENOMEM; } - if ((xhci->quirks & XHCI_SW_BW_CHECKING) && + if ((xhci->quirks & XHCI_SW_BW_CHECKING) && !ctx_change && xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); @@ -4242,8 +4242,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_unlock(&xhci->mutex); ret = xhci_disable_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); - if (!ret) - xhci_alloc_dev(hcd, udev); + if (!ret) { + if (xhci_alloc_dev(hcd, udev) == 1) + xhci_setup_addressable_virt_dev(xhci, udev); + } kfree(command->completion); kfree(command); return -EPROTO; -- 2.25.1

2 1

[PATCH openEuler-22.03-LTS-SP1] xhci: Fix Panther point NULL pointer deref at full-speed re-enumeration
by Peng Zhang 14 Oct '24

14 Oct '24

From: Mathias Nyman <mathias.nyman(a)linux.intel.com> stable inclusion from stable-v5.10.225 commit 0f0654318e25b2c185e245ba4a591e42fabb5e59 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAOXZE CVE: CVE-2024-45006 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- commit af8e119f52e9c13e556be9e03f27957554a84656 upstream. re-enumerating full-speed devices after a failed address device command can trigger a NULL pointer dereference. Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size value during enumeration. Usb core calls usb_ep0_reinit() in this case, which ends up calling xhci_configure_endpoint(). On Panther point xHC the xhci_configure_endpoint() function will additionally check and reserve bandwidth in software. Other hosts do this in hardware If xHC address device command fails then a new xhci_virt_device structure is allocated as part of re-enabling the slot, but the bandwidth table pointers are not set up properly here. This triggers the NULL pointer dereference the next time usb_ep0_reinit() is called and xhci_configure_endpoint() tries to check and reserve bandwidth [46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd [46710.713699] usb 3-1: Device not responding to setup address. [46710.917684] usb 3-1: Device not responding to setup address. [46711.125536] usb 3-1: device not accepting address 5, error -71 [46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008 [46711.125600] #PF: supervisor read access in kernel mode [46711.125603] #PF: error_code(0x0000) - not-present page [46711.125606] PGD 0 P4D 0 [46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI [46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1 [46711.125620] Hardware name: Gigabyte Technology Co., Ltd. [46711.125623] Workqueue: usb_hub_wq hub_event [usbcore] [46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c Fix this by making sure bandwidth table pointers are set up correctly after a failed address device command, and additionally by avoiding checking for bandwidth in cases like this where no actual endpoints are added or removed, i.e. only context for default control endpoint 0 is evaluated. Reported-by: Karel Balej <balejk(a)matfyz.cz> Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/ Cc: stable(a)vger.kernel.org Fixes: 651aaf36a7d7 ("usb: xhci: Handle USB transaction error on address command") Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.inte… Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: ZhangPeng <zhangpeng362(a)huawei.com> --- drivers/usb/host/xhci.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index b37ddbb88b74..b4e5b15fbed9 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2826,7 +2826,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, xhci->num_active_eps); return -ENOMEM; } - if ((xhci->quirks & XHCI_SW_BW_CHECKING) && + if ((xhci->quirks & XHCI_SW_BW_CHECKING) && !ctx_change && xhci_reserve_bandwidth(xhci, virt_dev, command->in_ctx)) { if ((xhci->quirks & XHCI_EP_LIMIT_QUIRK)) xhci_free_host_resources(xhci, ctrl_ctx); @@ -4242,8 +4242,10 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_unlock(&xhci->mutex); ret = xhci_disable_slot(xhci, udev->slot_id); xhci_free_virt_device(xhci, udev->slot_id); - if (!ret) - xhci_alloc_dev(hcd, udev); + if (!ret) { + if (xhci_alloc_dev(hcd, udev) == 1) + xhci_setup_addressable_virt_dev(xhci, udev); + } kfree(command->completion); kfree(command); return -EPROTO; -- 2.25.1

2 1

[PATCH OLK-6.6] crypto: stm32/cryp - call finalize with bh disabled
by Huang Xiaojia 14 Oct '24

14 Oct '24

From: Maxime Méré <maxime.mere(a)foss.st.com> stable inclusion from stable-v6.6.50 commit d93a2f86b0a998aa1f0870c85a2a60a0771ef89a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU3C CVE: CVE-2024-47658 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 56ddb9aa3b324c2d9645b5a7343e46010cf3f6ce ] The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. Signed-off-by: Maxime Méré <maxime.mere(a)foss.st.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Huang Xiaojia <huangxiaojia2(a)huawei.com> --- drivers/crypto/stm32/stm32-cryp.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c index f095f0065428..2f1b82cf10b1 100644 --- a/drivers/crypto/stm32/stm32-cryp.c +++ b/drivers/crypto/stm32/stm32-cryp.c @@ -11,6 +11,7 @@ #include <crypto/internal/des.h> #include <crypto/internal/skcipher.h> #include <crypto/scatterwalk.h> +#include <linux/bottom_half.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/err.h> @@ -1665,8 +1666,11 @@ static irqreturn_t stm32_cryp_irq_thread(int irq, void *arg) it_mask &= ~IMSCR_OUT; stm32_cryp_write(cryp, cryp->caps->imsc, it_mask); - if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) + if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) { + local_bh_disable(); stm32_cryp_finish_req(cryp, 0); + local_bh_enable(); + } return IRQ_HANDLED; } -- 2.34.1

2 1

[PATCH openEuler-22.03-LTS-SP1] crypto: stm32/cryp - call finalize with bh disabled
by Huang Xiaojia 14 Oct '24

14 Oct '24

From: Maxime Méré <maxime.mere(a)foss.st.com> stable inclusion from stable-v6.6.50 commit d93a2f86b0a998aa1f0870c85a2a60a0771ef89a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU3C CVE: CVE-2024-47658 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 56ddb9aa3b324c2d9645b5a7343e46010cf3f6ce ] The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. Signed-off-by: Maxime Méré <maxime.mere(a)foss.st.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/crypto/stm32/stm32-cryp.c [Adapt context conflict] Signed-off-by: Huang Xiaojia <huangxiaojia2(a)huawei.com> --- drivers/crypto/stm32/stm32-cryp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c index 81eb136b6c11..3467d0c98129 100644 --- a/drivers/crypto/stm32/stm32-cryp.c +++ b/drivers/crypto/stm32/stm32-cryp.c @@ -1525,8 +1525,11 @@ static irqreturn_t stm32_cryp_irq_thread(int irq, void *arg) it_mask &= ~IMSCR_OUT; stm32_cryp_write(cryp, CRYP_IMSCR, it_mask); - if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) + if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) { + local_bh_disable(); stm32_cryp_finish_req(cryp, 0); + local_bh_enable(); + } return IRQ_HANDLED; } -- 2.34.1

2 1

[PATCH OLK-5.10] crypto: stm32/cryp - call finalize with bh disabled
by Huang Xiaojia 14 Oct '24

14 Oct '24

From: Maxime Méré <maxime.mere(a)foss.st.com> stable inclusion from stable-v6.6.50 commit d93a2f86b0a998aa1f0870c85a2a60a0771ef89a category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAVU3C CVE: CVE-2024-47658 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 56ddb9aa3b324c2d9645b5a7343e46010cf3f6ce ] The finalize operation in interrupt mode produce a produces a spinlock recursion warning. The reason is the fact that BH must be disabled during this process. Signed-off-by: Maxime Méré <maxime.mere(a)foss.st.com> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Conflicts: drivers/crypto/stm32/stm32-cryp.c [Adapt context conflict] Signed-off-by: Huang Xiaojia <huangxiaojia2(a)huawei.com> --- drivers/crypto/stm32/stm32-cryp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/stm32/stm32-cryp.c b/drivers/crypto/stm32/stm32-cryp.c index 81eb136b6c11..3467d0c98129 100644 --- a/drivers/crypto/stm32/stm32-cryp.c +++ b/drivers/crypto/stm32/stm32-cryp.c @@ -1525,8 +1525,11 @@ static irqreturn_t stm32_cryp_irq_thread(int irq, void *arg) it_mask &= ~IMSCR_OUT; stm32_cryp_write(cryp, CRYP_IMSCR, it_mask); - if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) + if (!cryp->payload_in && !cryp->header_in && !cryp->payload_out) { + local_bh_disable(); stm32_cryp_finish_req(cryp, 0); + local_bh_enable(); + } return IRQ_HANDLED; } -- 2.34.1

2 1

2025

2024

2023

2022

2021

2020

2019

Kernel