- Kernel - mailweb.openeuler.org

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 v10 0/6] block: Add config to show info about opening a mounted device for write
by Li Lingfeng 12 Jan '24

12 Jan '24

v1->v2: 1) Replace BLK_DEV_DUMPINFO with BLK_DEV_WRITE_MOUNTED_QUIET, which is logically opposite; 2) Make BLK_DEV_WRITE_MOUNTED_QUIET dependent on BLK_DEV_WRITE_MOUNTED, and decide whether to set bd_writers by BLK_DEV_WRITE_MOUNTED_QUIET; 3) Move bdev_dump_info() into bdev_may_open(); 4) Add the cmdline interface to control whether to show info; 5) Pass the state of "writes blocked" to part0 when mounting a partition. v2->v3: Add restriction for modifying bd_writers. v3->v4: 1) Count bd_writers regardless of whether bdev_allow_write_mounted is set; 2) Expand the meaning of bdev_allow_write_mounted; 3) Add config option to detect writing to part0 while partitions mounted; 4) Add bd_mounters to record the number of times that part0 or partition is mounted; 5) Show info about opening a lower device for write while upper-layers mounted. v4->v5: Move introduction of bd_mounters to patch1. v5->v6: Delete redundant conflict judgment. v6->v7: 1) Replace BLK_DEV_WRITE_MOUNTED_QUIET with BLK_DEV_WRITE_MOUNTED_DUMP; 2) Remove restriction for setting bdev_allow_write_mounted by cmdline. v7->v8: 1) Add detection of mounting part0 while partitions write opened; 2) Add detection of writing partitions while part0 mounted; 3) Add config in openeuler_defconfig. v8->v9: 1) Split bd_mounters into bd_mounted and part_mounters; 2) Add part_writers; 3) Count part_writers and part_mounters regardless of whether BLK_DEV_DETECT_WRITING_PART0 is set. v9->v10: 1) Split the logic of detecting writing lower device from bd_may_open(); 2) Fix the bug of initializing bdev_allow_write_mounted. Li Lingfeng (6): block: Record writing and mounting regardless of whether bdev_allow_write_mounted is set block: Expand the meaning of bdev_allow_write_mounted block: Add config option to detect writing to part0 while partitions mounted block: Add config option to show info about opening a mounted device for write block: Show info about opening a lower device for write while upper-layers mounted add config about writing mounted devices in openeuler_defconfig arch/arm64/configs/openeuler_defconfig | 3 + arch/x86/configs/openeuler_defconfig | 3 + block/Kconfig | 17 ++++ block/bdev.c | 123 +++++++++++++++++++++---- include/linux/blk_types.h | 3 + include/linux/blkdev.h | 2 + 6 files changed, 133 insertions(+), 18 deletions(-) -- 2.31.1

2 7

[PATCH OLK-6.6 00/12] Support feature pv-qspinlock pv-sched
by lishusen 12 Jan '24

12 Jan '24

Support feature pv-qspinlock pv-sched Zengruan Ye (10): KVM: arm64: Document PV-sched interface KVM: arm64: Implement PV_SCHED_FEATURES call KVM: arm64: Support pvsched preempted via shared structure KVM: arm64: Add interface to support vCPU preempted check KVM: arm64: Support the vCPU preemption check KVM: arm64: Add SMCCC PV-sched to kick cpu KVM: arm64: Implement PV_SCHED_KICK_CPU call KVM: arm64: Add interface to support PV qspinlock KVM: arm64: Enable PV qspinlock KVM: arm64: Add tracepoints for PV qspinlock lishusen (1): KVM: arm64: Replace pv.ops by static_call for PV qspinlock feature yezengruan (1): kvm: arm64: fix some pvsched bugs Documentation/virt/kvm/arm/pvsched.rst | 74 ++++++++ arch/arm64/Kconfig | 13 ++ arch/arm64/include/asm/Kbuild | 1 - arch/arm64/include/asm/kvm_host.h | 20 +++ arch/arm64/include/asm/paravirt.h | 49 ++++++ arch/arm64/include/asm/pvsched-abi.h | 16 ++ arch/arm64/include/asm/qspinlock.h | 48 +++++ arch/arm64/include/asm/qspinlock_paravirt.h | 12 ++ arch/arm64/include/asm/spinlock.h | 13 ++ arch/arm64/kernel/Makefile | 3 +- arch/arm64/kernel/paravirt-spinlocks.c | 21 +++ arch/arm64/kernel/paravirt.c | 185 ++++++++++++++++++++ arch/arm64/kernel/trace-paravirt.h | 66 +++++++ arch/arm64/kvm/Makefile | 2 +- arch/arm64/kvm/arm.c | 15 +- arch/arm64/kvm/handle_exit.c | 1 + arch/arm64/kvm/hypercalls.c | 20 +++ arch/arm64/kvm/pvsched.c | 79 +++++++++ arch/arm64/kvm/trace_arm.h | 18 ++ include/linux/arm-smccc.h | 25 +++ include/linux/cpuhotplug.h | 1 + 21 files changed, 678 insertions(+), 4 deletions(-) create mode 100644 Documentation/virt/kvm/arm/pvsched.rst create mode 100644 arch/arm64/include/asm/pvsched-abi.h create mode 100644 arch/arm64/include/asm/qspinlock.h create mode 100644 arch/arm64/include/asm/qspinlock_paravirt.h create mode 100644 arch/arm64/kernel/paravirt-spinlocks.c create mode 100644 arch/arm64/kernel/trace-paravirt.h create mode 100644 arch/arm64/kvm/pvsched.c -- 2.33.0

2 13

[PATCH OLK-5.10] drm/amdgpu: correct the amdgpu runtime dereference usage count
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Prike Liang <Prike.Liang(a)amd.com> stable inclusion from stable-v5.10.205 commit d4fb20dcc13b37ee4f02025cd1dc8054d6027721 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit c6df7f313794c3ad41a49b9a7c95da369db607f3 ] Fix the amdgpu runpm dereference usage count. Signed-off-by: Prike Liang <Prike.Liang(a)amd.com> Reviewed-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Cc: stable(a)vger.kernel.org Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_display.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c index 7cc7af2a6822..3671a700189d 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c @@ -299,13 +299,11 @@ int amdgpu_display_crtc_set_config(struct drm_mode_set *set, adev->have_disp_power_ref = true; return ret; } - /* if we have no active crtcs, then drop the power ref - we got before */ - if (!active && adev->have_disp_power_ref) { - pm_runtime_put_autosuspend(dev->dev); + /* if we have no active crtcs, then go to + * drop the power ref we got before + */ + if (!active && adev->have_disp_power_ref) adev->have_disp_power_ref = false; - } - out: /* drop the power reference we got coming in here */ pm_runtime_put_autosuspend(dev->dev); -- 2.33.0

1 0

[PATCH OLK-5.10] drm/dp_mst: Fix NULL deref in get_mst_branch_device_by_guid_helper()
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Lukasz Majczak <lma(a)semihalf.com> stable inclusion from stable-v5.10.205 commit 31c31a78dccfc6ad15af1f6e55ce8cfbb3d31fa5 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 3d887d512494d678b17c57b835c32f4e48d34f26 ] As drm_dp_get_mst_branch_device_by_guid() is called from drm_dp_get_mst_branch_device_by_guid(), mstb parameter has to be checked, otherwise NULL dereference may occur in the call to the memcpy() and cause following: [12579.365869] BUG: kernel NULL pointer dereference, address: 0000000000000049 [12579.365878] #PF: supervisor read access in kernel mode [12579.365880] #PF: error_code(0x0000) - not-present page [12579.365882] PGD 0 P4D 0 [12579.365887] Oops: 0000 [#1] PREEMPT SMP NOPTI ... [12579.365895] Workqueue: events_long drm_dp_mst_up_req_work [12579.365899] RIP: 0010:memcmp+0xb/0x29 [12579.365921] Call Trace: [12579.365927] get_mst_branch_device_by_guid_helper+0x22/0x64 [12579.365930] drm_dp_mst_up_req_work+0x137/0x416 [12579.365933] process_one_work+0x1d0/0x419 [12579.365935] worker_thread+0x11a/0x289 [12579.365938] kthread+0x13e/0x14f [12579.365941] ? process_one_work+0x419/0x419 [12579.365943] ? kthread_blkcg+0x31/0x31 [12579.365946] ret_from_fork+0x1f/0x30 As get_mst_branch_device_by_guid_helper() is recursive, moving condition to the first line allow to remove a similar one for step over of NULL elements inside a loop. Fixes: 5e93b8208d3c ("drm/dp/mst: move GUID storage from mgr, port to only mst branch") Cc: <stable(a)vger.kernel.org> # 4.14+ Signed-off-by: Lukasz Majczak <lma(a)semihalf.com> Reviewed-by: Radoslaw Biernacki <rad(a)chromium.org> Signed-off-by: Manasi Navare <navaremanasi(a)chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230922063410.23626-1-lma@se… Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/drm_dp_mst_topology.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c index b5e15933cb5f..27305f339881 100644 --- a/drivers/gpu/drm/drm_dp_mst_topology.c +++ b/drivers/gpu/drm/drm_dp_mst_topology.c @@ -2612,14 +2612,14 @@ static struct drm_dp_mst_branch *get_mst_branch_device_by_guid_helper( struct drm_dp_mst_branch *found_mstb; struct drm_dp_mst_port *port; + if (!mstb) + return NULL; + if (memcmp(mstb->guid, guid, 16) == 0) return mstb; list_for_each_entry(port, &mstb->ports, next) { - if (!port->mstb) - continue; - found_mstb = get_mst_branch_device_by_guid_helper(port->mstb, guid); if (found_mstb) -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: correct chunk_ptr to a pointer to chunk.
by Dapeng Yu 12 Jan '24

12 Jan '24

From: YuanShang <YuanShang.Mao(a)amd.com> stable inclusion from stable-v5.10.205 commit 13b1fa5407949fb7ada3d2362c5099e18b2a25c8 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 50d51374b498457c4dea26779d32ccfed12ddaff ] The variable "chunk_ptr" should be a pointer pointing to a struct drm_amdgpu_cs_chunk instead of to a pointer of that. Signed-off-by: YuanShang <YuanShang.Mao(a)amd.com> Reviewed-by: Christian König <christian.koenig(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c index ffd8f5601e28..9e5eae1207e4 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -153,7 +153,7 @@ static int amdgpu_cs_parser_init(struct amdgpu_cs_parser *p, union drm_amdgpu_cs } for (i = 0; i < p->nchunks; i++) { - struct drm_amdgpu_cs_chunk __user **chunk_ptr = NULL; + struct drm_amdgpu_cs_chunk __user *chunk_ptr = NULL; struct drm_amdgpu_cs_chunk user_chunk; uint32_t __user *cdata; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Qu Huang <qu.huang(a)linux.dev> stable inclusion from stable-v5.10.205 commit f475d5502f33a6c5b149b0afe96316ad1962a64a category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit 5104fdf50d326db2c1a994f8b35dcd46e63ae4ad ] In certain types of chips, such as VEGA20, reading the amdgpu_regs_smc file could result in an abnormal null pointer access when the smc_rreg pointer is NULL. Below are the steps to reproduce this issue and the corresponding exception log: 1. Navigate to the directory: /sys/kernel/debug/dri/0 2. Execute command: cat amdgpu_regs_smc 3. Exception Log:: [4005007.702554] BUG: kernel NULL pointer dereference, address: 0000000000000000 [4005007.702562] #PF: supervisor instruction fetch in kernel mode [4005007.702567] #PF: error_code(0x0010) - not-present page [4005007.702570] PGD 0 P4D 0 [4005007.702576] Oops: 0010 [#1] SMP NOPTI [4005007.702581] CPU: 4 PID: 62563 Comm: cat Tainted: G OE 5.15.0-43-generic #46-Ubunt u [4005007.702590] RIP: 0010:0x0 [4005007.702598] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.702600] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.702605] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.702609] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.702612] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.702615] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.702618] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.702622] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.702626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.702629] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 [4005007.702633] Call Trace: [4005007.702636] <TASK> [4005007.702640] amdgpu_debugfs_regs_smc_read+0xb0/0x120 [amdgpu] [4005007.703002] full_proxy_read+0x5c/0x80 [4005007.703011] vfs_read+0x9f/0x1a0 [4005007.703019] ksys_read+0x67/0xe0 [4005007.703023] __x64_sys_read+0x19/0x20 [4005007.703028] do_syscall_64+0x5c/0xc0 [4005007.703034] ? do_user_addr_fault+0x1e3/0x670 [4005007.703040] ? exit_to_user_mode_prepare+0x37/0xb0 [4005007.703047] ? irqentry_exit_to_user_mode+0x9/0x20 [4005007.703052] ? irqentry_exit+0x19/0x30 [4005007.703057] ? exc_page_fault+0x89/0x160 [4005007.703062] ? asm_exc_page_fault+0x8/0x30 [4005007.703068] entry_SYSCALL_64_after_hwframe+0x44/0xae [4005007.703075] RIP: 0033:0x7f5e07672992 [4005007.703079] Code: c0 e9 b2 fe ff ff 50 48 8d 3d fa b2 0c 00 e8 c5 1d 02 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 e c 28 48 89 54 24 [4005007.703083] RSP: 002b:00007ffe03097898 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [4005007.703088] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f5e07672992 [4005007.703091] RDX: 0000000000020000 RSI: 00007f5e06753000 RDI: 0000000000000003 [4005007.703094] RBP: 00007f5e06753000 R08: 00007f5e06752010 R09: 00007f5e06752010 [4005007.703096] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000022000 [4005007.703099] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000 [4005007.703105] </TASK> [4005007.703107] Modules linked in: nf_tables libcrc32c nfnetlink algif_hash af_alg binfmt_misc nls_ iso8859_1 ipmi_ssif ast intel_rapl_msr intel_rapl_common drm_vram_helper drm_ttm_helper amd64_edac t tm edac_mce_amd kvm_amd ccp mac_hid k10temp kvm acpi_ipmi ipmi_si rapl sch_fq_codel ipmi_devintf ipm i_msghandler msr parport_pc ppdev lp parport mtd pstore_blk efi_pstore ramoops pstore_zone reed_solo mon ip_tables x_tables autofs4 ib_uverbs ib_core amdgpu(OE) amddrm_ttm_helper(OE) amdttm(OE) iommu_v 2 amd_sched(OE) amdkcl(OE) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec rc_core drm igb ahci xhci_pci libahci i2c_piix4 i2c_algo_bit xhci_pci_renesas dca [4005007.703184] CR2: 0000000000000000 [4005007.703188] ---[ end trace ac65a538d240da39 ]--- [4005007.800865] RIP: 0010:0x0 [4005007.800871] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6. [4005007.800874] RSP: 0018:ffffa82b46d27da0 EFLAGS: 00010206 [4005007.800878] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffa82b46d27e68 [4005007.800881] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff9940656e0000 [4005007.800883] RBP: ffffa82b46d27dd8 R08: 0000000000000000 R09: ffff994060c07980 [4005007.800886] R10: 0000000000020000 R11: 0000000000000000 R12: 00007f5e06753000 [4005007.800888] R13: ffff9940656e0000 R14: ffffa82b46d27e68 R15: 00007f5e06753000 [4005007.800891] FS: 00007f5e0755b740(0000) GS:ffff99479d300000(0000) knlGS:0000000000000000 [4005007.800895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [4005007.800898] CR2: ffffffffffffffd6 CR3: 00000003253fc000 CR4: 00000000003506e0 Signed-off-by: Qu Huang <qu.huang(a)linux.dev> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 00a190929b55..48df32dd352e 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -575,6 +575,9 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf, ssize_t result = 0; int r; + if (!adev->smc_rreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; @@ -634,6 +637,9 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user * ssize_t result = 0; int r; + if (!adev->smc_wreg) + return -EPERM; + if (size & 0x3 || *pos & 0x3) return -EINVAL; -- 2.33.0

1 0

[PATCH OLK-5.10] drm/amd/display: Exit idle optimizations before attempt to access PHY
by Dapeng Yu 12 Jan '24

12 Jan '24

From: Leo Chen <sancchen(a)amd.com> stable inclusion from stable-v5.10.205 commit 357badc01add6e98dd69c9831843da9cc3e905e9 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I8AS5P CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=… ------------------------- [ Upstream commit de612738e9771bd66aeb20044486c457c512f684 ] [Why & How] DMUB may hang when powering down pixel clocks due to no dprefclk. It is fixed by exiting idle optimization before the attempt to access PHY. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas(a)amd.com> Acked-by: Alex Hung <alex.hung(a)amd.com> Signed-off-by: Leo Chen <sancchen(a)amd.com> Tested-by: Daniel Wheeler <daniel.wheeler(a)amd.com> Signed-off-by: Alex Deucher <alexander.deucher(a)amd.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> Signed-off-by: Baogen Shang <baogen.shang(a)windriver.com> --- drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c index e33fe0207b9e..53e8defd3475 100644 --- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c @@ -1682,10 +1682,13 @@ void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context) hws->funcs.edp_backlight_control(edp_link_with_sink, false); } /*resume from S3, no vbios posting, no need to power down again*/ + clk_mgr_exit_optimized_pwr_state(dc, dc->clk_mgr); + power_down_all_hw_blocks(dc); disable_vga_and_power_gate_all_controllers(dc); if (edp_link_with_sink && !keep_edp_vdd_on) dc->hwss.edp_power_control(edp_link_with_sink, false); + clk_mgr_optimize_pwr_state(dc, dc->clk_mgr); } bios_set_scratch_acc_mode_change(dc->ctx->dc_bios); } -- 2.33.0

1 0

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_pool: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

[PATCH OLK-6.6 00/26] Introduce dynamic pool feature
by Liu Shixin 12 Jan '24

12 Jan '24

Rename from dynamic hugetlb(OLK_5.10) to dynamic pool. A per-memcg pagepool. The task in the memcg will prefer to alloc pages from corresponding pool. Liu Shixin (26): mm/memcg: introduce mem_cgroup_scan_cgroups to scan all memcgs mm/memcg: introduce memcg_has_children to check memcg mm/dynamic_pool: introduce per-memcg memory pool mm/dynamic_pool: introduce PG_dpool to mark free pages in dpool mm/dynamic_pool: introduce PG_pool to mark pages allocated from dpool mm/dynamic_pool: create dpool by dhugetlb.nr_pages interface mm/dynamic_pool: fill dpool with HugeTLB 1G pages mm/dynamic_pool: add interface to configure the count of hugepages mm/dynamic_pool: add restore_pool ops to reclaim memory and restore hugepages mm/dynamic_pool: support to flow pages between 1G and 2M pages pool mm/dynamic_pool: support to flow pages between 2M and 4K pages pool mm/dynamic_pool: migrate used pages before promote to huge page mm/dynamic_pool: call mem_cgroup_force_empty before restore pool mm/dynamic_pool: prevent task attach to another dpool mm/dynamic_pool: support page allocation from dpool mm/dynamic_pool: speed up allocation by percpu pages pool mm/dynamic_pool: check resv for HugeTLB allocation from dpool mm/dynamic_pool: support HugeTLB page allocation from dpool mm/dynamic_pool: add tracepoints for dpool mm/dynamic_pool: fill dpool with pagelist mm/dynamic_pool: disable THP for task attached with dpool mm/dynamic_pool: compatible with HugeTLB dissolve mm/dynamic_pool: compatible with HugeTLB Vmemmap mm/dynamic_pool: compatible with memory hwpoison mm/dynamic_hugetlb: add Document for dynamic hugetlb feature mm/dynamic_pool: enable CONFIG_DYNAMIC_POOL on x86_64 and arm64 by default Documentation/mm/dynamic_hugetlb.rst | 100 ++ arch/arm64/configs/openeuler_defconfig | 1 + arch/x86/configs/openeuler_defconfig | 1 + fs/hugetlbfs/inode.c | 5 + fs/proc/meminfo.c | 3 + fs/proc/page.c | 3 + include/linux/dynamic_pool.h | 228 ++++ include/linux/hugetlb.h | 11 + include/linux/memcontrol.h | 21 + include/linux/memory_hotplug.h | 5 + include/linux/mm.h | 1 + include/linux/page-flags.h | 22 + include/ras/ras_event.h | 1 + include/trace/events/dynamic_pool.h | 174 +++ include/trace/events/mmflags.h | 7 + include/uapi/linux/kernel-page-flags.h | 1 + kernel/cgroup/cgroup.c | 12 + mm/Kconfig | 9 + mm/Makefile | 1 + mm/dynamic_pool.c | 1722 ++++++++++++++++++++++++ mm/hugetlb.c | 103 +- mm/hugetlb_vmemmap.c | 4 + mm/internal.h | 6 + mm/khugepaged.c | 18 + mm/memcontrol.c | 119 +- mm/memory-failure.c | 16 +- mm/memory.c | 7 +- mm/memory_hotplug.c | 2 +- mm/page_alloc.c | 28 +- mm/shmem.c | 3 + mm/show_mem.c | 2 + tools/mm/page-types.c | 1 + 32 files changed, 2598 insertions(+), 39 deletions(-) create mode 100644 Documentation/mm/dynamic_hugetlb.rst create mode 100644 include/linux/dynamic_pool.h create mode 100644 include/trace/events/dynamic_pool.h create mode 100644 mm/dynamic_pool.c -- 2.25.1

2 27

2024

2023

2022

2021

2020

2019

Kernel