From: Matthias Schiffer matthias.schiffer@ew.tq-group.com
stable inclusion from stable-v6.6.33 commit d1e3dc19d50ffe3e5c6f21d281867f758a3fb843 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/IAD6H2
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 0fdd27b9d6d7c60bd319d3497ad797934bab13cb ]
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard reset handlers. Initially, the handlers are set to mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom() to match the existing behavior. No functional change intended (except for additional error messages on failure).
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent") Signed-off-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Wang Hai wanghai38@huawei.com --- drivers/net/dsa/mv88e6xxx/chip.c | 50 +++++++++++++++++++++++++++++--- drivers/net/dsa/mv88e6xxx/chip.h | 6 ++++ 2 files changed, 52 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index e5bac87941f6..a2aec16abb8f 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3021,6 +3021,7 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip) static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) { struct gpio_desc *gpiod = chip->reset; + int err;
/* If there is a GPIO connected to the reset pin, toggle it */ if (gpiod) { @@ -3029,17 +3030,26 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip) * mid-byte, causing the first EEPROM read after the reset * from the wrong location resulting in the switch booting * to wrong mode and inoperable. + * For this reason, switch families with EEPROM support + * generally wait for EEPROM loads to complete as their pre- + * and post-reset handlers. */ - if (chip->info->ops->get_eeprom) - mv88e6xxx_g2_eeprom_wait(chip); + if (chip->info->ops->hardware_reset_pre) { + err = chip->info->ops->hardware_reset_pre(chip); + if (err) + dev_err(chip->dev, "pre-reset error: %d\n", err); + }
gpiod_set_value_cansleep(gpiod, 1); usleep_range(10000, 20000); gpiod_set_value_cansleep(gpiod, 0); usleep_range(10000, 20000);
- if (chip->info->ops->get_eeprom) - mv88e6xxx_g2_eeprom_wait(chip); + if (chip->info->ops->hardware_reset_post) { + err = chip->info->ops->hardware_reset_post(chip); + if (err) + dev_err(chip->dev, "post-reset error: %d\n", err); + } } }
@@ -4266,6 +4276,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4456,6 +4468,8 @@ static const struct mv88e6xxx_ops mv88e6172_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4556,6 +4570,8 @@ static const struct mv88e6xxx_ops mv88e6176_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4650,6 +4666,8 @@ static const struct mv88e6xxx_ops mv88e6190_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4708,6 +4726,8 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4764,6 +4784,8 @@ static const struct mv88e6xxx_ops mv88e6191_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4823,6 +4845,8 @@ static const struct mv88e6xxx_ops mv88e6240_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4876,6 +4900,8 @@ static const struct mv88e6xxx_ops mv88e6250_ops = { .watchdog_ops = &mv88e6250_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6250_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -4923,6 +4949,8 @@ static const struct mv88e6xxx_ops mv88e6290_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -4982,6 +5010,8 @@ static const struct mv88e6xxx_ops mv88e6320_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -5028,6 +5058,8 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, @@ -5078,6 +5110,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5233,6 +5267,8 @@ static const struct mv88e6xxx_ops mv88e6352_ops = { .watchdog_ops = &mv88e6097_watchdog_ops, .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6352_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5295,6 +5331,8 @@ static const struct mv88e6xxx_ops mv88e6390_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5357,6 +5395,8 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = { .watchdog_ops = &mv88e6390_watchdog_ops, .mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, @@ -5422,6 +5462,8 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = { .watchdog_ops = &mv88e6393x_watchdog_ops, .mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu, .pot_clear = mv88e6xxx_g2_pot_clear, + .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait, + .hardware_reset_post = mv88e6xxx_g2_eeprom_wait, .reset = mv88e6352_g1_reset, .rmu_disable = mv88e6390_g1_rmu_disable, .atu_get_hash = mv88e6165_g1_atu_get_hash, diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h index c54d305a1d83..f48a3c0ac7f9 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.h +++ b/drivers/net/dsa/mv88e6xxx/chip.h @@ -476,6 +476,12 @@ struct mv88e6xxx_ops { int (*ppu_enable)(struct mv88e6xxx_chip *chip); int (*ppu_disable)(struct mv88e6xxx_chip *chip);
+ /* Additional handlers to run before and after hard reset, to make sure + * that the switch and EEPROM are in a good state. + */ + int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip); + int (*hardware_reset_post)(struct mv88e6xxx_chip *chip); + /* Switch Software Reset */ int (*reset)(struct mv88e6xxx_chip *chip);