From: Andy Shevchenko andriy.shevchenko@linux.intel.com
stable inclusion from stable-v5.10.99 commit 14bc9978b486d0780f1d1d834202c899da68c47d bugzilla: https://gitee.com/openeuler/kernel/issues/I55O7H
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit e12963c453263d5321a2c610e98cbc731233b685 upstream.
The commit af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") hadn't taken into account an update of the IRQ flags scenario.
When updating the IRQ flags on the preconfigured line the ->irq_set_type() is called again. In such case the sequential Rx buffer configuration changes may trigger a falling or rising edge interrupt that may lead, on some platforms, to an undesired event.
This may happen because each of intel_gpio_set_gpio_mode() and __intel_gpio_set_direction() updates the pad configuration with a different value of the GPIORXDIS bit. Notable, that the intel_gpio_set_gpio_mode() is called only for the pads that are configured as an input. Due to this fact, integrate the logic of __intel_gpio_set_direction() call into the intel_gpio_set_gpio_mode() so that the Rx buffer won't be disabled and immediately re-enabled.
Fixes: af7e3eeb84e2 ("pinctrl: intel: Disable input and output buffer when switching to GPIO") Reported-by: Kane Chen kane.chen@intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Tested-by: Grace Kao grace.kao@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Yu Liao liaoyu15@huawei.com Reviewed-by: Wei Li liwei391@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/pinctrl/intel/pinctrl-intel.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index b6ef1911c1dd..7f7214d3157c 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -441,8 +441,8 @@ static void intel_gpio_set_gpio_mode(void __iomem *padcfg0) value &= ~PADCFG0_PMODE_MASK; value |= PADCFG0_PMODE_GPIO;
- /* Disable input and output buffers */ - value |= PADCFG0_GPIORXDIS; + /* Disable TX buffer and enable RX (this will be input) */ + value &= ~PADCFG0_GPIORXDIS; value |= PADCFG0_GPIOTXDIS;
/* Disable SCI/SMI/NMI generation */ @@ -487,9 +487,6 @@ static int intel_gpio_request_enable(struct pinctrl_dev *pctldev,
intel_gpio_set_gpio_mode(padcfg0);
- /* Disable TX buffer and enable RX (this will be input) */ - __intel_gpio_set_direction(padcfg0, true); - raw_spin_unlock_irqrestore(&pctrl->lock, flags);
return 0; @@ -1105,9 +1102,6 @@ static int intel_gpio_irq_type(struct irq_data *d, unsigned int type)
intel_gpio_set_gpio_mode(reg);
- /* Disable TX buffer and enable RX (this will be input) */ - __intel_gpio_set_direction(reg, true); - value = readl(reg);
value &= ~(PADCFG0_RXEVCFG_MASK | PADCFG0_RXINV);