From: Anatolii Gerasymenko anatolii.gerasymenko@intel.com
stable inclusion from stable-v5.10.127 commit 40b3815b2c9027061fb74c1d21a1e9b8f486977d category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I5XDDK
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit c3d184c83ff4b80167e34edfc3d21df424bf27ff ]
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once.
Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds.
Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko anatolii.gerasymenko@intel.com Tested-by: Gurucharan gurucharanx.g@intel.com (A Contingent worker at Intel) Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com Reviewed-by: Wei Li liwei391@huawei.com --- drivers/net/ethernet/intel/ice/ice_ethtool.c | 39 +++++++++++++++++++- 1 file changed, 38 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_ethtool.c b/drivers/net/ethernet/intel/ice/ice_ethtool.c index 57fe21c23cb1..107eeaa3b4fe 100644 --- a/drivers/net/ethernet/intel/ice/ice_ethtool.c +++ b/drivers/net/ethernet/intel/ice/ice_ethtool.c @@ -2174,6 +2174,42 @@ ice_setup_autoneg(struct ice_port_info *p, struct ethtool_link_ksettings *ks, return err; }
+/** + * ice_set_phy_type_from_speed - set phy_types based on speeds + * and advertised modes + * @ks: ethtool link ksettings struct + * @phy_type_low: pointer to the lower part of phy_type + * @phy_type_high: pointer to the higher part of phy_type + * @adv_link_speed: targeted link speeds bitmap + */ +static void +ice_set_phy_type_from_speed(const struct ethtool_link_ksettings *ks, + u64 *phy_type_low, u64 *phy_type_high, + u16 adv_link_speed) +{ + /* Handle 1000M speed in a special way because ice_update_phy_type + * enables all link modes, but having mixed copper and optical + * standards is not supported. + */ + adv_link_speed &= ~ICE_AQ_LINK_SPEED_1000MB; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseT_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_T | + ICE_PHY_TYPE_LOW_1G_SGMII; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseKX_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_KX; + + if (ethtool_link_ksettings_test_link_mode(ks, advertising, + 1000baseX_Full)) + *phy_type_low |= ICE_PHY_TYPE_LOW_1000BASE_SX | + ICE_PHY_TYPE_LOW_1000BASE_LX; + + ice_update_phy_type(phy_type_low, phy_type_high, adv_link_speed); +} + /** * ice_set_link_ksettings - Set Speed and Duplex * @netdev: network interface device structure @@ -2310,7 +2346,8 @@ ice_set_link_ksettings(struct net_device *netdev, adv_link_speed = curr_link_speed;
/* Convert the advertise link speeds to their corresponded PHY_TYPE */ - ice_update_phy_type(&phy_type_low, &phy_type_high, adv_link_speed); + ice_set_phy_type_from_speed(ks, &phy_type_low, &phy_type_high, + adv_link_speed);
if (!autoneg_changed && adv_link_speed == curr_link_speed) { netdev_info(netdev, "Nothing changed, exiting without setting anything.\n");