From: Martin Blumenstingl martin.blumenstingl@googlemail.com
stable inclusion from stable-v5.10.89 commit c8e366a01c20019a631d1aa151a918d67757ab8d bugzilla: 186140 https://gitee.com/openeuler/kernel/issues/I4S8HA
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
commit f89b548ca66be7500dcd92ee8e61590f7d08ac91 upstream.
The vendor driver implements special handling for multi-block SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC register for these commands. In all other cases this bit is cleared. Here we omit SD_IO_RW_DIRECT since that command never has any data attached to it.
This fixes SDIO wifi using the brcmfmac driver which reported the following error without this change on a Netxeon S82 board using a Meson8 (S802) SoC: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_sdiod_ramrw: membytes transfer failed brcmf_sdio_download_code_file: error -110 on writing 219557 membytes at 0x00000000 brcmf_sdio_download_firmware: dongle image file download failed
And with this change: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Martin Blumenstingl martin.blumenstingl@googlemail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@google... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Chen Jun chenjun102@huawei.com Signed-off-by: Zheng Zengkai zhengzengkai@huawei.com --- drivers/mmc/host/meson-mx-sdhc-mmc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/drivers/mmc/host/meson-mx-sdhc-mmc.c b/drivers/mmc/host/meson-mx-sdhc-mmc.c index 7cd9c0ec2fcf..8fdd0bbbfa21 100644 --- a/drivers/mmc/host/meson-mx-sdhc-mmc.c +++ b/drivers/mmc/host/meson-mx-sdhc-mmc.c @@ -135,6 +135,7 @@ static void meson_mx_sdhc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) { struct meson_mx_sdhc_host *host = mmc_priv(mmc); + bool manual_stop = false; u32 ictl, send; int pack_len;
@@ -172,12 +173,27 @@ static void meson_mx_sdhc_start_cmd(struct mmc_host *mmc, else /* software flush: */ ictl |= MESON_SDHC_ICTL_DATA_XFER_OK; + + /* + * Mimic the logic from the vendor driver where (only) + * SD_IO_RW_EXTENDED commands with more than one block set the + * MESON_SDHC_MISC_MANUAL_STOP bit. This fixes the firmware + * download in the brcmfmac driver for a BCM43362/1 card. + * Without this sdio_memcpy_toio() (with a size of 219557 + * bytes) times out if MESON_SDHC_MISC_MANUAL_STOP is not set. + */ + manual_stop = cmd->data->blocks > 1 && + cmd->opcode == SD_IO_RW_EXTENDED; } else { pack_len = 0;
ictl |= MESON_SDHC_ICTL_RESP_OK; }
+ regmap_update_bits(host->regmap, MESON_SDHC_MISC, + MESON_SDHC_MISC_MANUAL_STOP, + manual_stop ? MESON_SDHC_MISC_MANUAL_STOP : 0); + if (cmd->opcode == MMC_STOP_TRANSMISSION) send |= MESON_SDHC_SEND_DATA_STOP;