From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
stable inclusion from stable-v5.10.221 commit 6ff7cfa02baabec907f6f29ea76634e6256d2ec4 category: bugfix bugzilla: https://gitee.com/src-openeuler/kernel/issues/IAB0L1 CVE: CVE-2024-39484
Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=...
--------------------------------
[ Upstream commit 55c421b364482b61c4c45313a535e61ed5ae4ea3 ]
Using __exit for the remove function results in the remove callback being discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g. using sysfs or hotplug), the driver is just removed without the cleanup being performed. This results in resource leaks. Fix it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in reference: davinci_mmcsd_driver+0x10 (section: .data) -> davinci_mmcsd_remove (section: .exit.text)
Fixes: b4cff4549b7a ("DaVinci: MMC: MMC/SD controller driver for DaVinci family") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240324114017.231936-2-u.kleine-koenig@pengutroni... Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Yi Yang yiyang13@huawei.com --- drivers/mmc/host/davinci_mmc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c index 647928ab00a3..77258948440f 100644 --- a/drivers/mmc/host/davinci_mmc.c +++ b/drivers/mmc/host/davinci_mmc.c @@ -1347,7 +1347,7 @@ static int davinci_mmcsd_probe(struct platform_device *pdev) return ret; }
-static int __exit davinci_mmcsd_remove(struct platform_device *pdev) +static int davinci_mmcsd_remove(struct platform_device *pdev) { struct mmc_davinci_host *host = platform_get_drvdata(pdev);
@@ -1404,7 +1404,7 @@ static struct platform_driver davinci_mmcsd_driver = { .of_match_table = davinci_mmc_dt_ids, }, .probe = davinci_mmcsd_probe, - .remove = __exit_p(davinci_mmcsd_remove), + .remove = davinci_mmcsd_remove, .id_table = davinci_mmc_devtype, };
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... 失败原因:调用gitee api创建PR失败, 失败原因如下: 目标分支 openEuler-22.03-LTS 为只读分支 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... Failed Reason: create PR failed when call gitee's api, failed reason is as follows: 目标分支 openEuler-22.03-LTS 为只读分支 Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... 失败原因:调用gitee api创建PR失败, 失败原因如下: 目标分支 openEuler-22.03-LTS 为只读分支 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... Failed Reason: create PR failed when call gitee's api, failed reason is as follows: 目标分支 openEuler-22.03-LTS 为只读分支 Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... 失败原因:调用gitee api创建PR失败, 失败原因如下: 目标分支 openEuler-22.03-LTS 为只读分支 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... Failed Reason: create PR failed when call gitee's api, failed reason is as follows: 目标分支 openEuler-22.03-LTS 为只读分支 Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... 失败原因:调用gitee api创建PR失败, 失败原因如下: 目标分支 openEuler-22.03-LTS 为只读分支 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... Failed Reason: create PR failed when call gitee's api, failed reason is as follows: 目标分支 openEuler-22.03-LTS 为只读分支 Suggest Solution: please wait, the bot will retry in the next interval
反馈: 您发送到kernel@openeuler.org的补丁/补丁集,转换为PR失败! 邮件列表地址:https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... 失败原因:调用gitee api创建PR失败, 失败原因如下: 目标分支 openEuler-22.03-LTS 为只读分支 建议解决方法:请稍等,机器人会在下一次任务重新执行
FeedBack: The patch(es) which you have sent to kernel@openeuler.org has been converted to PR failed! Mailing list address: https://mailweb.openeuler.org/hyperkitty/list/kernel@openeuler.org/message/I... Failed Reason: create PR failed when call gitee's api, failed reason is as follows: 目标分支 openEuler-22.03-LTS 为只读分支 Suggest Solution: please wait, the bot will retry in the next interval