- Kernel - mailweb.openeuler.org

[PATCH OLK-6.6 v2 00/18] moc bypass cache
by Jiacheng Yu 29 Oct '26

29 Oct '26

moc bypass cache by page based attribute Fanhua Li (2): arm64: mm: Set PBHA0 bit for VM_PBHA_BIT0 arm64: mm: Introduce procfs interface to update PBHA0 bit James Morse (7): KVM: arm64: Detect and enable PBHA for stage2 dt-bindings: Rename the description of cpu nodes cpu.yaml dt-bindings: arm: Add binding for Page Based Hardware Attributes arm64: cpufeature: Enable PBHA bits for stage1 arm64: mm: Add pgprot_pbha() to allow drivers to request PBHA values KVM: arm64: Configure PBHA bits for stage2 Documentation: arm64: Describe the support and expectations for PBHA Ma Wupeng (9): arm64: cpufeature: Enable PBHA for stage1 early via FDT arm64: mm: Detect and enable PBHA bit0 at early startup arm64: mm: Update kernel pte entries if pbha bit0 enabled arm64: mm: Show PBHA bit 59 as PBHA0 in ptdump arm64: mm: Introduce VM_PBHA_BIT0 to enable pbha bit0 for single vma arm64: mm: Set flag VM_PBHA_BIT0 for global init task arm64: mm: Introduce prctl to control pbha behavior arm64: mm: Introduce kernel param pbha openeuler: configs: arm64: Enable PBHA by default .../admin-guide/kernel-parameters.txt | 7 + Documentation/admin-guide/mm/pagemap.rst | 4 +- Documentation/arch/arm64/index.rst | 1 + Documentation/arm64/pbha.rst | 87 +++ .../devicetree/bindings/arm/cpu.yaml | 578 ++++++++++++++++ .../devicetree/bindings/arm/cpus.yaml | 623 ++---------------- arch/arm64/Kconfig | 19 + arch/arm64/configs/openeuler_defconfig | 1 + arch/arm64/include/asm/cpufeature.h | 15 + arch/arm64/include/asm/kvm_arm.h | 1 + arch/arm64/include/asm/kvm_pgtable.h | 9 + arch/arm64/include/asm/mman.h | 7 + arch/arm64/include/asm/pgtable-hwdef.h | 6 + arch/arm64/include/asm/pgtable.h | 26 + arch/arm64/include/asm/setup.h | 1 + arch/arm64/include/uapi/asm/mman.h | 1 + arch/arm64/kernel/cpufeature.c | 258 ++++++++ arch/arm64/kernel/head.S | 3 + arch/arm64/kernel/image-vars.h | 2 + arch/arm64/kvm/hyp/pgtable.c | 16 +- arch/arm64/mm/fixmap.c | 2 + arch/arm64/mm/hugetlbpage.c | 3 + arch/arm64/mm/mmap.c | 4 + arch/arm64/mm/mmu.c | 13 +- arch/arm64/mm/ptdump.c | 5 + arch/arm64/tools/cpucaps | 6 +- .../firmware/efi/libstub/efi-stub-helper.c | 3 + drivers/firmware/efi/libstub/fdt.c | 52 ++ drivers/soc/hisilicon/Makefile | 1 + drivers/soc/hisilicon/pbha.c | 211 ++++++ fs/proc/base.c | 116 ++++ fs/proc/task_mmu.c | 18 + include/linux/mm.h | 10 +- include/linux/pbha.h | 93 +++ include/uapi/asm-generic/mman-common.h | 1 + include/uapi/linux/prctl.h | 1 + kernel/sys.c | 10 + mm/memory.c | 4 + mm/vmalloc.c | 4 + tools/include/uapi/asm-generic/mman-common.h | 1 + 40 files changed, 1661 insertions(+), 562 deletions(-) create mode 100644 Documentation/arm64/pbha.rst create mode 100644 Documentation/devicetree/bindings/arm/cpu.yaml create mode 100644 drivers/soc/hisilicon/pbha.c create mode 100644 include/linux/pbha.h -- 2.43.0

2 19

[PATCH OLK-6.6] configfs: unhash the dentry before dropping the item in rmdir
by Ran Hongyun 29 Oct '26

29 Oct '26

mainline inclusion from mainline-v7.3-rc3 commit f06c2d26d1999d37e93299db0ecead04ca7d0b9f category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/19854 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- configfs_get_config_item() treats a hashed dentry as proof that sd->s_element is a live config_item. configfs_rmdir() breaks that: simple_rmdir() leaves the dentry hashed, the last reference to the item is dropped right after, and the dentry is only unhashed by d_delete() once ->rmdir() has returned. configfs_symlink() resolves its target holding no lock on it, so get_target() can land in that window: BUG: KASAN: slab-use-after-free in config_item_get+0x26/0x90 get_target fs/configfs/symlink.c:128 [inline] configfs_symlink+0x4ab/0x1030 fs/configfs/symlink.c:185 Unhash in configfs_remove_dir(), while the item is still guaranteed to be there. A reference obtained just before that stays harmless, as create_link() rechecks CONFIGFS_USET_DROPPING, already set by configfs_detach_prep(). Both configfs_unregister_subsystem() paths d_drop() after detaching, so this only makes rmdir match them. Reported-by: syzbot+6b16e3d085833cbf3e25(a)syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6b16e3d085833cbf3e25 Fixes: 7063fbf22611 ("[PATCH] configfs: User-driven configuration filesystem") Cc: stable(a)vger.kernel.org Signed-off-by: Vasileios Almpanis <vasilisalmpanis(a)gmail.com> Tested-by: Breno Leitao <leitao(a)debian.org> Reviewed-by: Breno Leitao <leitao(a)debian.org> Link: https://patch.msgid.link/20260730093435.195441-3-vasilisalmpanis@gmail.com Signed-off-by: Breno Leitao <leitao(a)debian.org> Conflicts: fs/configfs/dir.c [1387aedb391a ("configfs: mark pinned dentries persistent") not merged.] Signed-off-by: Ran Hongyun <ranhongyun1(a)huawei.com> --- fs/configfs/dir.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/fs/configfs/dir.c b/fs/configfs/dir.c index 46540846d815..e7ca50f11996 100644 --- a/fs/configfs/dir.c +++ b/fs/configfs/dir.c @@ -395,8 +395,17 @@ static void remove_dir(struct dentry * d) configfs_remove_dirent(d); - if (d_really_is_positive(d)) - simple_rmdir(d_inode(parent),d); + if (d_really_is_positive(d)) { + if (!simple_rmdir(d_inode(parent), d)) + /* + * configfs_get_config_item() takes a hashed dentry as + * proof that ->s_element is still alive. Our caller + * is about to drop the last reference to the item and + * the VFS will not unhash until after we return, so + * unhash it here. + */ + d_drop(d); + } pr_debug(" o %pd removing done (%d)\n", d, d_count(d)); -- 2.52.0

2 1

[PATCH] irqbypass: Use xarray to track producers and consumers
by Jinqian Yang 29 Oct '26

29 Oct '26

From: Sean Christopherson <seanjc(a)google.com> Track IRQ bypass producers and consumers using an xarray to avoid the O(2n) insertion time associated with walking a list to check for duplicate entries, and to search for an partner. At low (tens or few hundreds) total producer/consumer counts, using a list is faster due to the need to allocate backing storage for xarray. But as count creeps into the thousands, xarray wins easily, and can provide several orders of magnitude better latency at high counts. E.g. hundreds of nanoseconds vs. hundreds of milliseconds. Cc: Oliver Upton <oliver.upton(a)linux.dev> Cc: David Matlack <dmatlack(a)google.com> Cc: Like Xu <like.xu.linux(a)gmail.com> Cc: Binbin Wu <binbin.wu(a)linux.intel.com> Reported-by: Yong He <alexyonghe(a)tencent.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217379 Link: https://lore.kernel.org/all/20230801115646.33990-1-likexu@tencent.com Reviewed-by: Kevin Tian <kevin.tian(a)intel.com> Acked-by: Michael S. Tsirkin <mst(a)redhat.com> Reviewed-by: Alex Williamson <alex.williamson(a)redhat.com> Link: https://lore.kernel.org/r/20250516230734.2564775-8-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc(a)google.com> --- include/linux/irqbypass.h | 4 --- virt/lib/irqbypass.c | 74 ++++++++++++++++++++------------------- 2 files changed, 38 insertions(+), 40 deletions(-) diff --git a/include/linux/irqbypass.h b/include/linux/irqbypass.h index b28197c87483..cd64fcaa88fe 100644 --- a/include/linux/irqbypass.h +++ b/include/linux/irqbypass.h @@ -33,7 +33,6 @@ struct irq_bypass_consumer; /** * struct irq_bypass_producer - IRQ bypass producer definition - * @node: IRQ bypass manager private list management * @eventfd: eventfd context used to match producers and consumers * @consumer: The connected consumer (NULL if no connection) * @irq: Linux IRQ number for the producer device @@ -47,7 +46,6 @@ struct irq_bypass_consumer; * for a physical device assigned to a VM. */ struct irq_bypass_producer { - struct list_head node; struct eventfd_ctx *eventfd; struct irq_bypass_consumer *consumer; int irq; @@ -61,7 +59,6 @@ struct irq_bypass_producer { /** * struct irq_bypass_consumer - IRQ bypass consumer definition - * @node: IRQ bypass manager private list management * @eventfd: eventfd context used to match producers and consumers * @producer: The connected producer (NULL if no connection) * @add_producer: Connect the IRQ consumer to an IRQ producer @@ -75,7 +72,6 @@ struct irq_bypass_producer { * portions of the interrupt handling to the VM. */ struct irq_bypass_consumer { - struct list_head node; struct eventfd_ctx *eventfd; struct irq_bypass_producer *producer; diff --git a/virt/lib/irqbypass.c b/virt/lib/irqbypass.c index 828556c081f5..ea888b9203d2 100644 --- a/virt/lib/irqbypass.c +++ b/virt/lib/irqbypass.c @@ -22,8 +22,8 @@ MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("IRQ bypass manager utility module"); -static LIST_HEAD(producers); -static LIST_HEAD(consumers); +static DEFINE_XARRAY(producers); +static DEFINE_XARRAY(consumers); static DEFINE_MUTEX(lock); /* @lock must be held when calling connect */ @@ -86,13 +86,13 @@ static void __disconnect(struct irq_bypass_producer *prod, * @producer: pointer to producer structure * @eventfd: pointer to the eventfd context associated with the producer * - * Add the provided IRQ producer to the list of producers and connect - * with any matching eventfd found on the IRQ consumers list. + * Add the provided IRQ producer to the set of producers and connect with the + * consumer with a matching eventfd, if one exists. */ int irq_bypass_register_producer(struct irq_bypass_producer *producer, struct eventfd_ctx *eventfd) { - struct irq_bypass_producer *tmp; + unsigned long index = (unsigned long)eventfd; struct irq_bypass_consumer *consumer; int ret; @@ -101,22 +101,20 @@ int irq_bypass_register_producer(struct irq_bypass_producer *producer, guard(mutex)(&lock); - list_for_each_entry(tmp, &producers, node) { - if (tmp->eventfd == eventfd) - return -EBUSY; - } + ret = xa_insert(&producers, index, producer, GFP_KERNEL); + if (ret) + return ret; - list_for_each_entry(consumer, &consumers, node) { - if (consumer->eventfd == eventfd) { - ret = __connect(producer, consumer); - if (ret) - return ret; - break; + consumer = xa_load(&consumers, index); + if (consumer) { + ret = __connect(producer, consumer); + if (ret) { + WARN_ON_ONCE(xa_erase(&producers, index) != producer); + return ret; } } producer->eventfd = eventfd; - list_add(&producer->node, &producers); return 0; } EXPORT_SYMBOL_GPL(irq_bypass_register_producer); @@ -125,11 +123,14 @@ EXPORT_SYMBOL_GPL(irq_bypass_register_producer); * irq_bypass_unregister_producer - unregister IRQ bypass producer * @producer: pointer to producer structure * - * Remove a previously registered IRQ producer from the list of producers - * and disconnect it from any connected IRQ consumer. + * Remove a previously registered IRQ producer (note, it's safe to call this + * even if registration was unsuccessful). Disconnect from the associated + * consumer, if one exists. */ void irq_bypass_unregister_producer(struct irq_bypass_producer *producer) { + unsigned long index = (unsigned long)producer->eventfd; + if (!producer->eventfd) return; @@ -138,8 +139,8 @@ void irq_bypass_unregister_producer(struct irq_bypass_producer *producer) if (producer->consumer) __disconnect(producer, producer->consumer); + WARN_ON_ONCE(xa_erase(&producers, index) != producer); producer->eventfd = NULL; - list_del(&producer->node); } EXPORT_SYMBOL_GPL(irq_bypass_unregister_producer); @@ -148,13 +149,13 @@ EXPORT_SYMBOL_GPL(irq_bypass_unregister_producer); * @consumer: pointer to consumer structure * @eventfd: pointer to the eventfd context associated with the consumer * - * Add the provided IRQ consumer to the list of consumers and connect - * with any matching eventfd found on the IRQ producer list. + * Add the provided IRQ consumer to the set of consumers and connect with the + * producer with a matching eventfd, if one exists. */ int irq_bypass_register_consumer(struct irq_bypass_consumer *consumer, struct eventfd_ctx *eventfd) { - struct irq_bypass_consumer *tmp; + unsigned long index = (unsigned long)eventfd; struct irq_bypass_producer *producer; int ret; @@ -166,22 +167,20 @@ int irq_bypass_register_consumer(struct irq_bypass_consumer *consumer, guard(mutex)(&lock); - list_for_each_entry(tmp, &consumers, node) { - if (tmp->eventfd == eventfd) - return -EBUSY; - } + ret = xa_insert(&consumers, index, consumer, GFP_KERNEL); + if (ret) + return ret; - list_for_each_entry(producer, &producers, node) { - if (producer->eventfd == eventfd) { - ret = __connect(producer, consumer); - if (ret) - return ret; - break; + producer = xa_load(&producers, index); + if (producer) { + ret = __connect(producer, consumer); + if (ret) { + WARN_ON_ONCE(xa_erase(&consumers, index) != consumer); + return ret; } } consumer->eventfd = eventfd; - list_add(&consumer->node, &consumers); return 0; } EXPORT_SYMBOL_GPL(irq_bypass_register_consumer); @@ -190,11 +189,14 @@ EXPORT_SYMBOL_GPL(irq_bypass_register_consumer); * irq_bypass_unregister_consumer - unregister IRQ bypass consumer * @consumer: pointer to consumer structure * - * Remove a previously registered IRQ consumer from the list of consumers - * and disconnect it from any connected IRQ producer. + * Remove a previously registered IRQ consumer (note, it's safe to call this + * even if registration was unsuccessful). Disconnect from the associated + * producer, if one exists. */ void irq_bypass_unregister_consumer(struct irq_bypass_consumer *consumer) { + unsigned long index = (unsigned long)consumer->eventfd; + if (!consumer->eventfd) return; @@ -203,7 +205,7 @@ void irq_bypass_unregister_consumer(struct irq_bypass_consumer *consumer) if (consumer->producer) __disconnect(consumer->producer, consumer); + WARN_ON_ONCE(xa_erase(&consumers, index) != consumer); consumer->eventfd = NULL; - list_del(&consumer->node); } EXPORT_SYMBOL_GPL(irq_bypass_unregister_consumer); -- 2.33.0

1 4

[PATCH OLK-6.6] namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE
by Zizhi Wo 29 Oct '26

29 Oct '26

stable inclusion from stable-v7.2.11 commit b8a94a405ddcf45e9470789e0a821d8f2aa4ca10 category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/20843 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- [ Upstream commit 0febe278ec45b1ccdbe9bd5ff1ba365d8fd55e2a ] open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change. Fixes: 9b8a0ba68246 ("mount: add OPEN_TREE_NAMESPACE") Cc: stable(a)vger.kernel.org # v7.0+ Link: https://patch.msgid.link/20260930-work-mount-fixes-3-v1-6-be34c83956ae@kern… Signed-off-by: Christian Brauner (Amutable) <brauner(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Zizhi Wo <wozizhi(a)huawei.com> --- fs/namespace.c | 36 +++++++++++++++++++++++++++++++----- 1 file changed, 31 insertions(+), 5 deletions(-) diff --git a/fs/namespace.c b/fs/namespace.c index f44f0870a3fd..c1c69aedad2e 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2098,10 +2098,22 @@ static bool has_locked_children(struct mount *mnt, struct dentry *dentry) return true; } return false; } +/* locks: namespace_shared && pinned(mnt) || mount_locked_reader */ +static bool __has_children(struct mount *mnt, struct dentry *dentry) +{ + struct mount *child; + + list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) { + if (is_subdir(child->mnt_mountpoint, dentry)) + return true; + } + return false; +} + /** * clone_private_mount - create a private clone of a path * @path: path to clone * * This creates a new vfsmount, which will be the clone of @path. The new mount @@ -2746,13 +2758,21 @@ static struct mnt_namespace *create_new_namespace(struct path *path, unsigned in struct path to_path; struct mountpoint *mp; struct mount *mnt; unsigned int copy_flags = 0; int err; + bool recurse = flags & AT_RECURSIVE; + bool foreign = user_ns != ns->user_ns; - if (user_ns != ns->user_ns) - copy_flags |= CL_SLAVE; + /* + * Without privileges over the mount namespace the copy is made + * from nothing mounted below @path may be left out. It would + * reveal what it covers. That's what unshare() gives such a + * caller as well. + */ + if (foreign) + copy_flags |= CL_SLAVE | CL_COPY_UNBINDABLE; new_ns = alloc_mnt_ns(user_ns, false); if (IS_ERR(new_ns)) return new_ns; @@ -2773,13 +2793,19 @@ static struct mnt_namespace *create_new_namespace(struct path *path, unsigned in } /* * We don't emulate unshare()ing a mount namespace. We stick * to the restrictions of creating detached bind-mounts. It - * has a lot saner and simpler semantics. + * has a lot saner and simpler semantics. A caller without + * privileges over the mount namespace can't leave out any + * child though. */ - mnt = __do_loopback(path, flags, copy_flags); + if (foreign && !recurse && + __has_children(real_mount(path->mnt), path->dentry)) + mnt = ERR_PTR(-EINVAL); + else + mnt = __do_loopback(path, flags, copy_flags); lock_mount_hash(); if (IS_ERR(mnt)) { err = PTR_ERR(mnt); umount_tree(new_ns_root, 0); @@ -2790,11 +2816,11 @@ static struct mnt_namespace *create_new_namespace(struct path *path, unsigned in /* * now mount the detached tree on top of the copy * of the real rootfs we created. */ attach_mnt(mnt, new_ns_root, mp, false); - if (user_ns != ns->user_ns) + if (foreign) lock_mnt_tree(new_ns_root); unlock_mount_hash(); mnt_add_tree_to_ns(new_ns, new_ns_root); -- 2.52.0

2 1

[PATCH OLK-6.6] bpf: Reject pkt arguments in mutating subprogs
by Chen Yuxi 29 Oct '26

29 Oct '26

From: Emil Tsalapatis <emil(a)etsalapatis.com> mainline inclusion from mainline-v7.3-rc2 commit a6c1edfbe240e4377038a0e1d233ad81fde9a21b category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/20656 CVE: CVE-2026-98589 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing the pointer in the subprog as PTR_TO_MEM, only permit it if the subprog is guaranteed not to mutate the packet. Fixes: 80f281664f5a ("bpf: Support pointers in global func args") Reported-by: Nicholas Carlini <nicholas(a)carlini.com> Suggested-by: Nicholas Carlini <nicholas(a)carlini.com> Signed-off-by: Emil Tsalapatis <emil(a)etsalapatis.com> Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Link: https://patch.msgid.link/20260922172028.6269-6-emil@etsalapatis.com Conflicts: kernel/bpf/verifier.c kernel/bpf/btf.c [commit 9b9f0b42703ceb88332bcb19453c4288c2683e34 not backport] Signed-off-by: Chen Yuxi <chenyuxi19(a)huawei.com> --- kernel/bpf/btf.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 3e3bfbbdbb5f..aad12310adb3 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -7159,11 +7159,25 @@ int btf_check_type_match(struct bpf_verifier_log *log, const struct bpf_prog *pr return btf_check_func_type_match(log, btf1, t1, btf2, t2); } +static bool reg_is_pkt_pointer_any(const struct bpf_reg_state *reg) +{ + return base_type(reg->type) == PTR_TO_PACKET || + base_type(reg->type) == PTR_TO_PACKET_META || + reg->type == PTR_TO_PACKET_END; +} + +static bool reg_is_dynptr_slice_pkt(const struct bpf_reg_state *reg) +{ + return base_type(reg->type) == PTR_TO_MEM && + (reg->type & DYNPTR_TYPE_SKB || reg->type & DYNPTR_TYPE_XDP); +} + static int btf_check_func_arg_match(struct bpf_verifier_env *env, const struct btf *btf, u32 func_id, struct bpf_reg_state *regs, bool ptr_to_mem_ok, - bool processing_call) + bool processing_call, + int subprog) { enum bpf_prog_type prog_type = resolve_prog_type(env->prog); struct bpf_verifier_log *log = &env->log; @@ -7251,6 +7265,16 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env, if (check_mem_reg(env, reg, regno, type_size)) return -EINVAL; + /* + * PTR_TO_PACKET get passed as PTR_TO_MEM, preventing + * us from adjusting bounds tracking info. + */ + if ((reg_is_pkt_pointer_any(reg) || reg_is_dynptr_slice_pkt(reg)) && + env->subprog_info[subprog].changes_pkt_data) { + bpf_log(log, "R%d is a packet pointer, but func#%d may change packet data\n", + regno, subprog); + return -EINVAL; + } } else { bpf_log(log, "reg type unsupported for arg#%d function %s#%d\n", i, func_name, func_id); @@ -7288,7 +7312,7 @@ int btf_check_subprog_arg_match(struct bpf_verifier_env *env, int subprog, return -EINVAL; is_global = prog->aux->func_info_aux[subprog].linkage == BTF_FUNC_GLOBAL; - err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, false); + err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, false, subprog); /* Compiler optimizations can remove arguments from static functions * or mismatched type can be passed into a global function. @@ -7331,7 +7355,7 @@ int btf_check_subprog_call(struct bpf_verifier_env *env, int subprog, return -EINVAL; is_global = prog->aux->func_info_aux[subprog].linkage == BTF_FUNC_GLOBAL; - err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, true); + err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, true, subprog); /* Compiler optimizations can remove arguments from static functions * or mismatched type can be passed into a global function. -- 2.34.1

2 1

[PATCH OLK-6.6] bpf: Reject pkt arguments in mutating subprogs
by Chen Yuxi 29 Oct '26

29 Oct '26

mainline inclusion from mainline-v7.3-rc2 commit a6c1edfbe240e4377038a0e1d233ad81fde9a21b category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/20656 CVE: CVE-2026-98589 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… -------------------------------- The verifier tracks changes in how PTR_TO_PACKET registers' bounds are modified across subprog boundaries. PTR_TO_PACKET registers are actually passed as PTR_TO_MEM, which is assumed valid for the entire call. This is not the case with packet memory, where a pskb_* call may invalidate its memory region. Reject BPF code that passes PTR_TO_PACKET pointers to subprogs that may mutate a packet. We cannot pass the pointer as a true PTR_TO_PACKET because we would also need to somehow pass the PTR_TO_PACKET_META or PTR_TO_PACKET_END to the subprog. Since we cannot avoid representing the pointer in the subprog as PTR_TO_MEM, only permit it if the subprog is guaranteed not to mutate the packet. Fixes: 80f281664f5a ("bpf: Support pointers in global func args") Reported-by: Nicholas Carlini <nicholas(a)carlini.com> Suggested-by: Nicholas Carlini <nicholas(a)carlini.com> Signed-off-by: Emil Tsalapatis <emil(a)etsalapatis.com> Signed-off-by: Alexei Starovoitov <ast(a)kernel.org> Link: https://patch.msgid.link/20260922172028.6269-6-emil@etsalapatis.com Conflicts: kernel/bpf/verifier.c kernel/bpf/btf.c [commit 9b9f0b42703ceb88332bcb19453c4288c2683e34 not backport] Signed-off-by: Chen Yuxi <chenyuxi19(a)huawei.com> --- kernel/bpf/btf.c | 30 +++++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c index 3e3bfbbdbb5f..aad12310adb3 100644 --- a/kernel/bpf/btf.c +++ b/kernel/bpf/btf.c @@ -7159,11 +7159,25 @@ int btf_check_type_match(struct bpf_verifier_log *log, const struct bpf_prog *pr return btf_check_func_type_match(log, btf1, t1, btf2, t2); } +static bool reg_is_pkt_pointer_any(const struct bpf_reg_state *reg) +{ + return base_type(reg->type) == PTR_TO_PACKET || + base_type(reg->type) == PTR_TO_PACKET_META || + reg->type == PTR_TO_PACKET_END; +} + +static bool reg_is_dynptr_slice_pkt(const struct bpf_reg_state *reg) +{ + return base_type(reg->type) == PTR_TO_MEM && + (reg->type & DYNPTR_TYPE_SKB || reg->type & DYNPTR_TYPE_XDP); +} + static int btf_check_func_arg_match(struct bpf_verifier_env *env, const struct btf *btf, u32 func_id, struct bpf_reg_state *regs, bool ptr_to_mem_ok, - bool processing_call) + bool processing_call, + int subprog) { enum bpf_prog_type prog_type = resolve_prog_type(env->prog); struct bpf_verifier_log *log = &env->log; @@ -7251,6 +7265,16 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env, if (check_mem_reg(env, reg, regno, type_size)) return -EINVAL; + /* + * PTR_TO_PACKET get passed as PTR_TO_MEM, preventing + * us from adjusting bounds tracking info. + */ + if ((reg_is_pkt_pointer_any(reg) || reg_is_dynptr_slice_pkt(reg)) && + env->subprog_info[subprog].changes_pkt_data) { + bpf_log(log, "R%d is a packet pointer, but func#%d may change packet data\n", + regno, subprog); + return -EINVAL; + } } else { bpf_log(log, "reg type unsupported for arg#%d function %s#%d\n", i, func_name, func_id); @@ -7288,7 +7312,7 @@ int btf_check_subprog_arg_match(struct bpf_verifier_env *env, int subprog, return -EINVAL; is_global = prog->aux->func_info_aux[subprog].linkage == BTF_FUNC_GLOBAL; - err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, false); + err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, false, subprog); /* Compiler optimizations can remove arguments from static functions * or mismatched type can be passed into a global function. @@ -7331,7 +7355,7 @@ int btf_check_subprog_call(struct bpf_verifier_env *env, int subprog, return -EINVAL; is_global = prog->aux->func_info_aux[subprog].linkage == BTF_FUNC_GLOBAL; - err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, true); + err = btf_check_func_arg_match(env, btf, btf_id, regs, is_global, true, subprog); /* Compiler optimizations can remove arguments from static functions * or mismatched type can be passed into a global function. -- 2.34.1

2 1

[PATCH OLK-6.6] drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM
by Hongtao Zhang 29 Oct '26

29 Oct '26

From: Peiyang He <peiyang_he(a)smail.nju.edu.cn> mainline inclusion from mainline-v7.3-rc5 commit 3359a372efb6d585c97019ee1b7f1874442bcebe category: bugfix bugzilla: https://atomgit.com/src-openeuler/kernel/issues/20586 CVE: CVE-2026-98517 Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id… -------------------------------- nouveau_uvmm_sm() calls op_map(), which passes bo->resource through nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads mem->mem.type. But this is only valid when bo->resource is backed by struct nouveau_mem, as is the case for VRAM and TT resources. If the BO is left in TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it as struct nouveau_mem makes the mem->mem.type read past the end of the resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm report: BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11 CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0xcb/0x5a0 mm/kasan/report.c:482 kasan_report+0xca/0x100 mm/kasan/report.c:595 nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline] nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline] op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline] nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903 nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline] nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532 nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline] nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364 drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061 process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322 process_scheduled_works kernel/workqueue.c:3405 [inline] worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486 kthread+0x31d/0x420 kernel/kthread.c:436 ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Allocated by task 2224 on cpu 0 at 66.550027s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 [inline] __kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 [inline] __do_kmalloc_node mm/slub.c:5334 [inline] __kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359 _kmalloc_noprof include/linux/slab.h:992 [inline] dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106 dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205 ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721 ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856 ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970 nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359 nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272 nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352 drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817 drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914 nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:597 [inline] __se_sys_ioctl fs/ioctl.c:583 [inline] __x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0x115/0x690 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 2223 on cpu 0 at 66.554063s: kasan_save_stack+0x24/0x50 mm/kasan/common.c:57 kasan_save_track+0x17/0x60 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 [inline] __kasan_slab_free+0x61/0x80 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 [inline] slab_free_hook mm/slub.c:2677 [inline] __rcu_free_sheaf_prepare+0xb6/0x2e0 mm/slub.c:2928 rcu_free_sheaf+0x1b/0x120 mm/slub.c:5978 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x521/0x1490 kernel/rcu/tree.c:2897 handle_softirqs+0x1b1/0x8a0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] invoke_softirq kernel/softirq.c:496 [inline] __irq_exit_rcu+0x137/0x1c0 kernel/softirq.c:735 irq_exit_rcu+0x9/0x20 kernel/softirq.c:752 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1062 [inline] sysvec_apic_timer_interrupt+0x70/0x80 arch/x86/kernel/apic/apic.c:1062 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:674 The buggy address belongs to the object at ffff888127d3e380 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 32 bytes inside of freed 96-byte region [ffff888127d3e380, ffff888127d3e3e0) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x127d3e flags: 0x200000000000000(node=0|zone=2) page_type: f5(slab) raw: 0200000000000000 ffff888100041280 dead000000000122 0000000000000000 raw: 0000000000000000 0000000000200020 00000000f5000000 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888127d3e280: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc ffff888127d3e300: 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc >ffff888127d3e380: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888127d3e400: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ffff888127d3e480: 00 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc Fix by resetting the placement to the BO's valid domains before calling nouveau_bo_validate(), matching the handling in nouveau_uvmm_bo_validate(), so map jobs do not run for SYSTEM resources; Reject BO that cannot reside in VRAM or GART; Also skip op_map() when the GPUVA has been invalidated, matching the handling in the unmap and remap paths. Found when fuzzing the nouveau driver with a modified Syzkaller. Fixes: b88baab82871 ("drm/nouveau: implement new VM_BIND uAPI") Cc: stable(a)vger.kernel.org Signed-off-by: Peiyang He <peiyang_he(a)smail.nju.edu.cn> Assisted-by: Codex:gpt-5.5 Reviewed-by: Lyude Paul <lyude(a)redhat.com> Signed-off-by: Lyude Paul <lyude(a)redhat.com> Link: https://patch.msgid.link/0D77BEC410CE0129+20260907052204.1431488-1-peiyang_… Conflicts: drivers/gpu/drm/nouveau/nouveau_uvmm.c [bind_lock_validate() doesn't exist in this tree, since the conversion to the drm_gpuvm exec helpers is not backported. The lock/validate loop is still open-coded in nouveau_uvmm_bind_job_submit(), which already resets the placement before validation, so only add the valid_domains check there. The op_map() hunk applies cleanly.] Signed-off-by: Zhang Hongtao <zhanghongtao35(a)huawei.com> --- drivers/gpu/drm/nouveau/nouveau_uvmm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/gpu/drm/nouveau/nouveau_uvmm.c b/drivers/gpu/drm/nouveau/nouveau_uvmm.c index 1310ee5f4973..a56d6adf4295 100644 --- a/drivers/gpu/drm/nouveau/nouveau_uvmm.c +++ b/drivers/gpu/drm/nouveau/nouveau_uvmm.c @@ -772,6 +772,9 @@ op_map(struct nouveau_uvma *uvma) { struct nouveau_bo *nvbo = nouveau_gem_object(uvma->va.gem.obj); + if (drm_gpuva_invalidated(&uvma->va)) + return; + nouveau_uvma_map(uvma, nouveau_mem(nvbo->bo.resource)); } @@ -1334,6 +1337,13 @@ nouveau_uvmm_bind_job_submit(struct nouveau_job *job) continue; nvbo = nouveau_gem_object(obj); + if (!(nvbo->valid_domains & + (NOUVEAU_GEM_DOMAIN_VRAM | NOUVEAU_GEM_DOMAIN_GART))) { + ret = -EINVAL; + op = list_last_op(&bind_job->ops); + goto unwind; + } + nouveau_bo_placement_set(nvbo, nvbo->valid_domains, 0); ret = nouveau_bo_validate(nvbo, true, false); if (ret) { -- 2.43.0

2 1

[PATCH OLK-6.6 V1 0/2] RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz()
by Yao Yiqi 29 Oct '26

29 Oct '26

There are kABI changes on this patch, so we add another patch to fix that. This is the patchset for all those patches. Jason Gunthorpe (1): RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz() Yao Yiqi (1): RDMA/umem: fix ib_umem_find_best_pgsz kABI drivers/infiniband/core/umem.c | 18 ++++++++++++------ include/rdma/ib_umem.h | 4 ++-- 2 files changed, 14 insertions(+), 8 deletions(-) -- 2.34.1

2 3

[PATCH OLK-6.6 v9 00/14] net: dynthread: dynamic threaded NAPI
by Cai Xinchen 28 Oct '26

28 Oct '26

This series makes the NAPI/queue/IRQ relationship visible to the network stack, backports the drivers and locking fixes it needs, and then builds net/dynthread on top of it: a loadable module that adapts the NAPI processing and the RX queue IRQ placement of a set of net devices to the scheduling behaviour of a target application at runtime. Motivation ---------- Interrupt and softirq processing of network RX competes with latency sensitive applications (e.g. mysqld) for CPU time. When such an application runs for a long time on a CPU without blocking, the softirq work of the NIC completion queues can preempt it on the same CPU and inflate its tail latency. The usual remedies are to steer the RX queue IRQs to other CPUs and/or to move NAPI processing into kernel threads bound to spare CPUs, but a static configuration cannot follow the application: once the target goes idle, is scheduled in short bursts, or is displaced, the reserved CPUs are simply wasted. To do this from a module, the queue a NAPI instance serves, the NAPI instance of a queue and the interrupt vector of that NAPI must be discoverable. Mainline added that association in v6.8/v6.9 (queue/NAPI pointer, netif_napi_set_irq(), mlx5e conversion) together with the RTNL fixes it requires. Patches 1-8 of this series backport that infrastructure, adapt it to the OLK KABI layout and fix the mlx5e lock ordering; patches 9-14 add the scheduler. Approach -------- The module periodically samples the scheduling statistics of all threads matching the appname module parameter and classifies them into one of five statuses (DATA_LOSS, NO_TASK, NOT_RUNNING, FRAGMENTATION, LONG_RUNNING_WITH_INTERRUPTS). Acting on that status it: - restores the RX queue IRQs to their original affinity when the target is gone or barely running; - spreads the IRQs over the NUMA node of their queues when processing in softirq context is acceptable again; - switches the NAPI processing of the configured net devices to kernel threads and binds the NAPI threads (and, optionally, the queue IRQs) to the CPUs of their NUMA node that the target tasks are not allowed to use; - scales the number of CPUs used by those threads with their measured load while the target stays in the long-running status. An unusable sample (counters moved backwards: DATA_LOSS) keeps the previous status, so a single bad sample cannot toggle the mode. Everything is controlled through module parameters, and the original IRQ affinity and NAPI mode are restored when the target disappears, the scheduler is disabled or the module is unloaded. The module is buildable only as a loadable module; the Kconfig entry currently allows ARM64 and it is enabled in the arm64 openeuler defconfig. Patch breakdown --------------- 1/14 net: Add queue and napi association Backport the queue <-> NAPI mapping: add enum netdev_queue_type, a napi pointer to struct netdev_queue and struct netdev_rx_queue, and netif_queue_set_napi() to set or clear it for RX and TX queues. The new netdev_queue field is put into reserve space so the layout of the structure is preserved. 2/14 net: fix KABI breakage for queue napi association Keep the struct layout stable across the backport: use the reserved domain segment of KABI 1 for netdev_queue and KABI 2 for netdev_rx_queue. 3/14 net: Add NAPI IRQ support Add napi->irq and netif_napi_set_irq(), so a driver can publish the interrupt vector that serves a NAPI instance. It is initialized to -1 by netif_napi_add_weight() and stays unknown for drivers that do not call the setter. The ice and netdev-genl/netlink parts of the upstream patch are not needed here and are dropped. 4/14 net: Fix napi irq KABI breakage Store napi->irq in the reserved domain segment of KABI 1 so that the napi_struct layout does not change. 5/14 net/mlx5e: link NAPI instances to queues and IRQs Make mlx5e call netif_napi_set_irq() when a channel is opened and register/clear the queue/NAPI association for its RX and TX queues (including the PTP queues) when they are activated/deactivated. This is also what users of the queue GET netlink API expect. 6/14 net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation netif_queue_set_napi() asserts RTNL for a registered netdev, so take the lock in the mlx5e TX reporter recovery paths that activate or deactivate queues without it. 7/14 net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover The RTNL has to be acquired before priv->state_lock in the PTP SQ recovery. Move the lock acquisition up so the order matches the probe and channel switch paths. 8/14 net/mlx5e: Do not block on RTNL while recovering an SQ The recovery callbacks run synchronously from devlink_health_report() under the devlink lock, from SQ work items, while channel teardown holds the RTNL and waits for those work items with cancel_work_sync(). Replace the blocking rtnl_lock() with rtnl_trylock() and abandon the recovery when the SQ has been disabled by the teardown, following the existing mlx5e_tx_timeout_work() pattern. This avoids a deadlock that also stalled all devlink operations on the device. 9/14 net: dynthread: Add dynamic threaded NAPI scheduler framework Wire the new directory into net/Kconfig and net/Makefile, add the NET_DYNTHREAD Kconfig entry (ARM64, module only) and the module skeleton. On load the module takes a reference on each device given with the '#' separated ifname parameter, walks the IRQ descriptor table through the exported irq_get_irq_data(), snapshots desc->action and the effective affinity under desc->lock, and records the IRQ number and the original affinity CPU of every RX queue. IRQs are matched against the device name, its parent device name and the irqname pattern. Also count the NUMA nodes the recorded queues span, drop the device references on unload, and unwind a partially failed init. 10/14 net: dynthread: Monitor the load of the target tasks Add the sampling loop and the status judgement. Every dyn_threaded_interval ms, every monitored thread whose name matches appname contributes its runtime, voluntary/involuntary context switches and its allowed CPU mask; the masks are unioned to know where the target may run. The sample is compared with the previous one to derive the average runtime per switch, the nvcsw percentage and the CPU load, and to classify it as DATA_LOSS, NO_TASK, NOT_RUNNING, FRAGMENTATION or LONG_RUNNING_WITH_INTERRUPTS. Add the periodic hrtimer/work worker, the dynthreaded enable/disable parameter, a mutex serializing the worker control, a zeroed baseline on every enable, and the last_status tracking used to carry the transition sample. 11/14 net: dynthread: Steer the RX queue IRQs away from the target tasks Manage the affinity of the recorded RX queue IRQs. When the target tasks sit in a single NUMA node and enough CPUs of that node are free, move all queue IRQs there round-robin; when the target is gone or barely running, restore the affinity recorded at load time; when the target is fragmented, spread the IRQs over a subset of their own NUMA node sized from dyn_threaded_irq_cpucore_per. Track the "bound to one node" state so spreading is suppressed while it is active, and clear it on every recovery. All of this is skipped when dyn_threaded_bindirq is off, and the IRQ affinity is restored when the worker is stopped. 12/14 net: dynthread: Switch NAPI to threads on spare CPUs Enable threaded NAPI (dev_set_threaded) on the monitored devices in LONG_RUNNING_WITH_INTERRUPTS and bind each NAPI thread from the NUMA node of its queue IRQ: use the whole node if the target is not there, the target-free CPUs of the node if any, otherwise the first dyn_threaded_corenum CPUs of the node. Use napi->irq when the driver published it and fall back to the RX queue IRQ recorded by the module (e.g. hns3) otherwise. The NAPI list is built by head insertion, so it is walked in reverse to visit the NAPIs in registration (vector) order, matching the ascending order in which the RX queue IRQs are recorded. Optionally bind the queue IRQ to the same mask. Record the CPUs used by the NAPI threads in napi_cpumask for the load evaluation of the next patch. Switch the devices back to softirq mode in NO_TASK, NOT_RUNNING and FRAGMENTATION, when the scheduler is disabled and on module unload; the NAPI and IRQ operations run under the rtnetlink lock. 13/14 net: dynthread: Scale the number of NAPI thread CPUs Sample the kernel_cpustat of the CPUs used by the NAPI threads and compare consecutive periods. Grow dyn_threaded_corenum when the irq/softirq share or the total load of those CPUs is too high, and shrink it when the user share is high or the total load is low, within the lower/upper limit parameters. Damping and anti-fight rules avoid oscillating right after a change or undoing a change made for the opposite reason; the two total-load driven directions check each other, and the cpustat baseline is taken over the mask that was actually just bound. The default core count is computed at init from the busiest device's RX queue count divided by the online NUMA nodes. The lower/upper limit parameters reject zero and an inverted range, refuse a change that would move the computed default out of range, and clamp the current core count into the new range. Reset the damping state and the baseline when leaving the long-running status or when the scheduler is stopped, and serialize the core-count updates with the module parameter setter. 14/14 net: dynthread: Add debug switch and instrumentation Add the dyn_threaded_debug module parameter and instrument the periodic sampling, the status transitions, the IRQ affinity decisions, the NAPI thread masks and the CPU-count resizes. The messages are recorded with trace_printk() so they can be read from tracefs without flooding the console; without tracing support they fall back to dynamic debug. The switch is off by default. Amritha Nambiar (2): net: Add queue and napi association net: Add NAPI IRQ support Cai Xinchen (7): net/mlx5e: Do not block on RTNL while recovering an SQ net: dynthread: Add dynamic threaded NAPI scheduler framework net: dynthread: Monitor the load of the target tasks net: dynthread: Steer the RX queue IRQs away from the target tasks net: dynthread: Switch NAPI to threads on spare CPUs net: dynthread: Scale the number of NAPI thread CPUs net: dynthread: Add debug switch and instrumentation Carolina Jubran (1): net/mlx5e: Acquire RTNL lock before RQs/SQs activation/deactivation Cosmin Ratiu (1): net/mlx5e: Fix lock order in mlx5e_tx_reporter_ptpsq_unhealthy_recover JiangJieHua (2): net: Fix KABI breakage for queue napi association net: Fix napi irq KABI breakage Joe Damato (1): net/mlx5e: link NAPI instances to queues and IRQs arch/arm64/configs/openeuler_defconfig | 1 + .../net/ethernet/mellanox/mlx5/core/en/ptp.c | 5 +- .../mellanox/mlx5/core/en/reporter_tx.c | 23 + .../net/ethernet/mellanox/mlx5/core/en_main.c | 7 + include/linux/netdevice.h | 21 +- include/net/netdev_rx_queue.h | 5 +- net/Kconfig | 1 + net/Makefile | 1 + net/core/dev.c | 38 + net/dynthread/Kconfig | 13 + net/dynthread/Makefile | 2 + net/dynthread/net_dynthread.c | 1539 +++++++++++++++++ net/dynthread/net_dynthread.h | 92 + 13 files changed, 1744 insertions(+), 4 deletions(-) create mode 100644 net/dynthread/Kconfig create mode 100644 net/dynthread/Makefile create mode 100644 net/dynthread/net_dynthread.c create mode 100644 net/dynthread/net_dynthread.h -- 2.18.0.huawei.25

2 15

[PATCH OLK-5.10 V1 0/2] RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz()
by Yao Yiqi 28 Oct '26

28 Oct '26

There are kABI changes on this patch, so we add another patch to fix that. This is the patchset for all those patches. Jason Gunthorpe (1): RDMA/umem: Be careful about boundary conditions in ib_umem_find_best_pgsz() Yao Yiqi (1): RDMA/umem: fix ib_umem_find_best_pgsz kABI drivers/infiniband/core/umem.c | 18 ++++++++++++------ include/rdma/ib_umem.h | 4 ++-- 2 files changed, 14 insertions(+), 8 deletions(-) -- 2.34.1

2 3